{
  "model_key": "gpt_4o_2024_05_13",
  "display_name": "GPT-4o (2024-05-13)",
  "provider": "openai",
  "evaluation_model_ids": [],
  "thinking_effort": "default",
  "configuration_note": "GPT-4o (2024-05-13) answered the 50 tasks in three rollouts through OpenRouter's chat completions route (openai/gpt-4o-2024-05-13) without reasoning (the model has no reasoning setting). Requests set temperature to 0 and max_tokens to 4,096, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for GPT-4o (2024-05-13) on 2026-11-10 ($5.00 input, $5.00 cached input, $15.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 8,
          "incorrect_count": 142,
          "partial_credit_count": 88,
          "zero_count": 54,
          "mean_score_0_to_4": 1.1533333333333333,
          "score_percent": 28.833333333333332,
          "score_distribution": {
            "0": 54,
            "1": 52,
            "2": 19,
            "3": 17,
            "4": 8
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 8,
          "incorrect_count": 142,
          "partial_credit_count": 88,
          "zero_count": 54,
          "mean_score_0_to_4": 1.1533333333333333,
          "score_percent": 28.833333333333332,
          "score_distribution": {
            "0": 54,
            "1": 52,
            "2": 19,
            "3": 17,
            "4": 8
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 5,
          "incorrect_count": 85,
          "partial_credit_count": 43,
          "zero_count": 42,
          "mean_score_0_to_4": 0.9555555555555556,
          "score_percent": 23.88888888888889,
          "score_distribution": {
            "0": 42,
            "1": 28,
            "2": 7,
            "3": 8,
            "4": 5
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 5,
          "incorrect_count": 85,
          "partial_credit_count": 43,
          "zero_count": 42,
          "mean_score_0_to_4": 0.9555555555555556,
          "score_percent": 23.88888888888889,
          "score_distribution": {
            "0": 42,
            "1": 28,
            "2": 7,
            "3": 8,
            "4": 5
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 3,
          "incorrect_count": 57,
          "partial_credit_count": 45,
          "zero_count": 12,
          "mean_score_0_to_4": 1.45,
          "score_percent": 36.25,
          "score_distribution": {
            "0": 12,
            "1": 24,
            "2": 12,
            "3": 9,
            "4": 3
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 3,
          "incorrect_count": 57,
          "partial_credit_count": 45,
          "zero_count": 12,
          "mean_score_0_to_4": 1.45,
          "score_percent": 36.25,
          "score_distribution": {
            "0": 12,
            "1": 24,
            "2": 12,
            "3": 9,
            "4": 3
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 2,
        "incorrect_count": 48,
        "partial_credit_count": 30,
        "zero_count": 18,
        "mean_score_0_to_4": 1.14,
        "score_percent": 28.499999999999996,
        "score_distribution": {
          "0": 18,
          "1": 17,
          "2": 7,
          "3": 6,
          "4": 2
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 4,
        "incorrect_count": 46,
        "partial_credit_count": 28,
        "zero_count": 18,
        "mean_score_0_to_4": 1.18,
        "score_percent": 29.5,
        "score_distribution": {
          "0": 18,
          "1": 17,
          "2": 7,
          "3": 4,
          "4": 4
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 2,
        "incorrect_count": 48,
        "partial_credit_count": 30,
        "zero_count": 18,
        "mean_score_0_to_4": 1.14,
        "score_percent": 28.499999999999996,
        "score_distribution": {
          "0": 18,
          "1": 18,
          "2": 5,
          "3": 7,
          "4": 2
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 5760,
        "input_tokens": 126957,
        "output_tokens": 67471,
        "total_tokens": 194428
      },
      "known_totals": {
        "cached_input_tokens": 5760,
        "input_tokens": 126957,
        "output_tokens": 67471,
        "total_tokens": 194428
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 1,
          "incorrect_count": 29,
          "partial_credit_count": 15,
          "zero_count": 14,
          "mean_score_0_to_4": 0.9333333333333333,
          "score_percent": 23.333333333333332,
          "score_distribution": {
            "0": 14,
            "1": 9,
            "2": 3,
            "3": 3,
            "4": 1
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 3,
          "incorrect_count": 27,
          "partial_credit_count": 13,
          "zero_count": 14,
          "mean_score_0_to_4": 1.0,
          "score_percent": 25.0,
          "score_distribution": {
            "0": 14,
            "1": 9,
            "2": 3,
            "3": 1,
            "4": 3
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 1,
          "incorrect_count": 29,
          "partial_credit_count": 15,
          "zero_count": 14,
          "mean_score_0_to_4": 0.9333333333333333,
          "score_percent": 23.333333333333332,
          "score_distribution": {
            "0": 14,
            "1": 10,
            "2": 1,
            "3": 4,
            "4": 1
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 1,
          "incorrect_count": 19,
          "partial_credit_count": 15,
          "zero_count": 4,
          "mean_score_0_to_4": 1.45,
          "score_percent": 36.25,
          "score_distribution": {
            "0": 4,
            "1": 8,
            "2": 4,
            "3": 3,
            "4": 1
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 1,
          "incorrect_count": 19,
          "partial_credit_count": 15,
          "zero_count": 4,
          "mean_score_0_to_4": 1.45,
          "score_percent": 36.25,
          "score_distribution": {
            "0": 4,
            "1": 8,
            "2": 4,
            "3": 3,
            "4": 1
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 1,
          "incorrect_count": 19,
          "partial_credit_count": 15,
          "zero_count": 4,
          "mean_score_0_to_4": 1.45,
          "score_percent": 36.25,
          "score_distribution": {
            "0": 4,
            "1": 8,
            "2": 4,
            "3": 3,
            "4": 1
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is given by the ratio of the transconductance (\\(g_m\\)) to the output conductance (\\(g_{ds}\\)). Mathematically, it is expressed as:\n\n\\[ \\text{Intrinsic Gain} = \\frac{g_m}{g_{ds}} \\]\n\nThe transconductance (\\(g_m\\)) is proportional to the width (\\(W\\)) of the MOSFET and inversely proportional to the length (\\(L\\)):\n\n\\[ g_m \\propto \\frac{W}{L} \\]\n\nThe output conductance (\\(g_{ds}\\)) is inversely proportional to the length (\\(L\\)):\n\n\\[ g_{ds} \\propto \\frac{1}{L} \\]\n\nIf we double both the width and the length of the MOSFET, the transconductance (\\(g_m\\)) will be:\n\n\\[ g_m \\propto \\frac{2W}{2L} = \\frac{W}{L} \\]\n\nAnd the output conductance (\\(g_{ds}\\)) will be:\n\n\\[ g_{ds} \\propto \\frac{1}{2L} \\]\n\nSince the intrinsic gain is the ratio of \\(g_m\\) to \\(g_{ds}\\):\n\n\\[ \\text{Intrinsic Gain} = \\frac{g_m}{g_{ds}} \\propto \\frac{\\frac{W}{L}}{\\frac{1}{2L}} = \\frac{W}{L} \\cdot 2L = 2 \\cdot \\frac{W}{L} \\]\n\nTherefore, doubling both the width and the length of the MOSFET will result in doubling the intrinsic gain.",
        "format": "markdown",
        "sha256": "603cd41cc9c73e6fdf904c55c6834f24d24a214f78b42c93dc57ba224ed037a4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that intrinsic gain doubles because gm remains unchanged while gds decreases with increased length. The scaling implicitly assumes constant overdrive (and thus approximately constant current), but the answer does not state this bias condition.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 354,
        "total_tokens": 381,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 354,
        "total_tokens": 381,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is given by the ratio of the transconductance (\\(g_m\\)) to the output conductance (\\(g_{ds}\\)). Mathematically, it is expressed as:\n\n\\[ \\text{Intrinsic Gain} = \\frac{g_m}{g_{ds}} \\]\n\nThe transconductance (\\(g_m\\)) is proportional to the width (\\(W\\)) of the MOSFET and the mobility (\\(\\mu\\)) of the charge carriers, among other factors. Specifically, \\(g_m\\) can be approximated as:\n\n\\[ g_m \\approx \\frac{2I_D}{V_{GS} - V_{th}} \\]\n\nwhere \\(I_D\\) is the drain current, \\(V_{GS}\\) is the gate-source voltage, and \\(V_{th}\\) is the threshold voltage.\n\nThe output conductance (\\(g_{ds}\\)) is influenced by the channel length modulation and is inversely proportional to the length (\\(L\\)) of the MOSFET. It can be approximated as:\n\n\\[ g_{ds} \\approx \\lambda I_D \\]\n\nwhere \\(\\lambda\\) is the channel length modulation parameter.\n\nWhen you double both the length (\\(L\\)) and width (\\(W\\)) of the MOSFET:\n\n1. **Transconductance (\\(g_m\\))**: Since \\(g_m\\) is proportional to the width (\\(W\\)), doubling the width will double the transconductance. Therefore, \\(g_m\\) will increase by a factor of 2.\n\n2. **Output Conductance (\\(g_{ds}\\))**: Since \\(g_{ds}\\) is inversely proportional to the length (\\(L\\)), doubling the length will halve the output conductance. Therefore, \\(g_{ds}\\) will decrease by a factor of 2.\n\nGiven these changes, the intrinsic gain, which is the ratio of \\(g_m\\) to \\(g_{ds}\\), will change as follows:\n\n\\[ \\text{Intrinsic Gain} = \\frac{g_m}{g_{ds}} \\]\n\nIf \\(g_m\\) is doubled and \\(g_{ds}\\) is halved, the intrinsic gain will increase by a factor of 4:\n\n\\[ \\text{New Intrinsic Gain} = \\frac{2g_m}{\\frac{g_{ds}}{2}} = 4 \\times \\frac{g_m}{g_{ds}} \\]\n\nTherefore, doubling both the length and width of a MOSFET will result in a fourfold increase in its intrinsic gain.",
        "format": "markdown",
        "sha256": "a666e42d81ef4f8c2a18687c8fccb206eeb3d69a935fcb862851995bf5da63a5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies the intrinsic-gain ratio and that increasing length reduces output conductance, but incorrectly says gm doubles. With both W and L doubled at constant overdrive, W/L and drain current stay approximately unchanged, so intrinsic gain roughly doubles—not quadruples.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 539,
        "total_tokens": 566,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 539,
        "total_tokens": 566,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is given by the ratio of the transconductance (\\(g_m\\)) to the output conductance (\\(g_{ds}\\)). Mathematically, it is expressed as:\n\n\\[ \\text{Intrinsic Gain} = \\frac{g_m}{g_{ds}} \\]\n\nThe transconductance (\\(g_m\\)) is proportional to the width (\\(W\\)) of the MOSFET and inversely proportional to the length (\\(L\\)):\n\n\\[ g_m \\propto \\frac{W}{L} \\]\n\nThe output conductance (\\(g_{ds}\\)) is inversely proportional to the length (\\(L\\)):\n\n\\[ g_{ds} \\propto \\frac{1}{L} \\]\n\nIf we double both the width (\\(W\\)) and the length (\\(L\\)) of the MOSFET, the transconductance (\\(g_m\\)) will change as follows:\n\n\\[ g_m \\propto \\frac{2W}{2L} = \\frac{W}{L} \\]\n\nSo, \\(g_m\\) remains unchanged.\n\nThe output conductance (\\(g_{ds}\\)) will change as follows:\n\n\\[ g_{ds} \\propto \\frac{1}{2L} \\]\n\nSince \\(g_{ds}\\) is inversely proportional to the length, doubling the length will halve the output conductance:\n\n\\[ g_{ds} \\rightarrow \\frac{g_{ds}}{2} \\]\n\nTherefore, the intrinsic gain will change as follows:\n\n\\[ \\text{Intrinsic Gain} = \\frac{g_m}{g_{ds}} \\rightarrow \\frac{g_m}{\\frac{g_{ds}}{2}} = 2 \\times \\frac{g_m}{g_{ds}} \\]\n\nThus, doubling both the width and the length of a MOSFET will result in doubling its intrinsic gain.",
        "format": "markdown",
        "sha256": "91be121f9b6fd1a40b00822282c4c36ff05da0b8fdf1953a9a90dfd7bee24052"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It reaches the correct result and gives the standard scaling: unchanged gm and halved gds, so intrinsic gain doubles. It omits the bias-condition assumptions behind those scalings, which limit how generally the conclusion applies.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 397,
        "total_tokens": 424,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 397,
        "total_tokens": 424,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Student A is correct. The transconductance (\\(g_m\\)) of a MOSFET is directly proportional to the overdrive voltage (\\(V_{OV}\\)), which is the difference between the gate-source voltage (\\(V_{GS}\\)) and the threshold voltage (\\(V_{th}\\)). Mathematically, the transconductance is given by:\n\n\\[ g_m = \\frac{2I_D}{V_{OV}} \\]\n\nwhere \\(I_D\\) is the drain current. Since \\(V_{OV} = V_{GS} - V_{th}\\), as \\(V_{OV}\\) increases, the transconductance \\(g_m\\) also increases, assuming the drain current \\(I_D\\) increases with \\(V_{OV}\\). Therefore, Student A's statement that the transconductance of a MOSFET goes up as the overdrive voltage increases is correct.",
        "format": "markdown",
        "sha256": "7589d268453acb8462a5b17e0fd71ab9907c427347fe4bc7a8a48d9de9dda19b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies Student A and notes that drain current rises with overdrive, but does not specify the fixed-device-size assumption or explain the square-law dependence that makes gm increase; its stated formula alone does not establish that trend.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 184,
        "total_tokens": 223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 184,
        "total_tokens": 223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Student A is correct. The transconductance (\\(g_m\\)) of a MOSFET is directly proportional to the overdrive voltage (\\(V_{ov}\\)), which is the difference between the gate-source voltage (\\(V_{GS}\\)) and the threshold voltage (\\(V_{th}\\)). Mathematically, the transconductance is given by:\n\n\\[ g_m = \\frac{2I_D}{V_{ov}} \\]\n\nwhere \\(I_D\\) is the drain current. Since \\(V_{ov} = V_{GS} - V_{th}\\), as \\(V_{ov}\\) increases, the transconductance \\(g_m\\) also increases, assuming the drain current \\(I_D\\) increases with \\(V_{ov}\\). Therefore, Student A's statement that the transconductance of a MOSFET goes up as the overdrive voltage increases is correct.",
        "format": "markdown",
        "sha256": "7f43f41b2e3156fe0d20a794b9d7d43fee16bea9e26679882010d08743a4f001"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies Student A and notes that drain current rises with overdrive. However, it does not state the key fixed-device-size condition or explain that, for fixed W/L, ID rises as Vov²; the formula gm = 2ID/Vov is otherwise ambiguous about the trend.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 184,
        "total_tokens": 223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 184,
        "total_tokens": 223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Student A is correct. The transconductance (\\(g_m\\)) of a MOSFET is directly proportional to the overdrive voltage (\\(V_{ov}\\)), which is the difference between the gate-source voltage (\\(V_{GS}\\)) and the threshold voltage (\\(V_{th}\\)). Mathematically, the transconductance is given by:\n\n\\[ g_m = \\frac{2I_D}{V_{ov}} \\]\n\nwhere \\(I_D\\) is the drain current. Since \\(V_{ov} = V_{GS} - V_{th}\\), as \\(V_{ov}\\) increases, the transconductance \\(g_m\\) also increases, assuming the drain current \\(I_D\\) increases with \\(V_{ov}\\). Therefore, Student A's statement that the transconductance of a MOSFET goes up as the overdrive voltage increases is correct.",
        "format": "markdown",
        "sha256": "7f43f41b2e3156fe0d20a794b9d7d43fee16bea9e26679882010d08743a4f001"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies Student A and notes that drain current rises with overdrive. However, it does not state the key fixed-device-size condition or explain that, for fixed W/L, ID rises as Vov²; the formula gm = 2ID/Vov is otherwise ambiguous about the trend.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 184,
        "total_tokens": 223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 184,
        "total_tokens": 223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal models of PMOS and NMOS devices are similar but not identical. Both models include parameters such as transconductance (\\(g_m\\)), output conductance (\\(g_{ds}\\)), and capacitances (\\(C_{gs}\\), \\(C_{gd}\\)). However, there are key differences due to the inherent characteristics of PMOS and NMOS transistors:\n\n1. **Polarity of Voltages and Currents**: \n   - In an NMOS transistor, the source is typically connected to the lowest potential (often ground), and the drain is at a higher potential. The gate voltage controls the current flow from drain to source.\n   - In a PMOS transistor, the source is typically connected to the highest potential (often the supply voltage \\(V_{DD}\\)), and the drain is at a lower potential. The gate voltage controls the current flow from source to drain.\n\n2. **Threshold Voltage**:\n   - NMOS transistors have a positive threshold voltage.\n   - PMOS transistors have a negative threshold voltage.\n\n3. **Direction of Current Flow**:\n   - In NMOS transistors, the current flows from drain to source.\n   - In PMOS transistors, the current flows from source to drain.\n\nDespite these differences, the small-signal parameters such as \\(g_m\\), \\(g_{ds}\\), and capacitances are defined similarly for both types of transistors. The small-signal equivalent circuits will look similar, but the direction of current flow and the polarity of voltages must be taken into account.\n\nFor example, in the small-signal model:\n- The transconductance \\(g_m\\) represents the change in drain current (\\(I_D\\) for NMOS, \\(I_S\\) for PMOS) with respect to the change in gate-source voltage (\\(V_{GS}\\)).\n- The output conductance \\(g_{ds}\\) represents the change in drain current (\\(I_D\\) for NMOS, \\(I_S\\) for PMOS) with respect to the change in drain-source voltage (\\(V_{DS}\\)).\n\nIn summary, while the small-signal models of PMOS and NMOS devices share similar components and structure, the specific details such as voltage polarities and current directions differ due to the nature of the devices.",
        "format": "markdown",
        "sha256": "47df090391db9eff141eba8851f6707725a68d68ae8160cf48521aef74c5a3f7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly describes the models as having the same basic structure, with polarity and current-direction differences, but its explicit conclusion that they are not identical misses that the form is the same when voltage and current conventions are chosen consistently.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 475,
        "total_tokens": 502,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 475,
        "total_tokens": 502,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal models of PMOS and NMOS devices are similar but not identical. Both models include parameters such as transconductance (\\(g_m\\)), output conductance (\\(g_{ds}\\)), and capacitances (\\(C_{gs}\\), \\(C_{gd}\\), etc.); however, there are key differences due to the inherent characteristics of PMOS and NMOS transistors.\n\n1. **Polarity of Voltages and Currents**: \n   - In an NMOS transistor, the source is typically at a lower potential than the drain, and the gate voltage must be higher than the source voltage to turn the device on.\n   - In a PMOS transistor, the source is typically at a higher potential than the drain, and the gate voltage must be lower than the source voltage to turn the device on.\n\n2. **Transconductance (\\(g_m\\))**:\n   - The expression for transconductance is similar, but the direction of current flow is opposite. For NMOS, \\(I_D = g_m V_{gs}\\), while for PMOS, \\(I_D = -g_m V_{sg}\\).\n\n3. **Output Conductance (\\(g_{ds}\\))**:\n   - The output conductance is defined similarly, but again, the direction of current flow is opposite.\n\n4. **Capacitances**:\n   - The intrinsic capacitances (\\(C_{gs}\\), \\(C_{gd}\\)) are present in both types of transistors, but the voltage dependencies and the signs of the charges involved differ.\n\n5. **Threshold Voltage**:\n   - NMOS devices have a positive threshold voltage, while PMOS devices have a negative threshold voltage.\n\nIn summary, while the small-signal models of PMOS and NMOS devices share similar components and structure, the signs and polarities of the voltages and currents differ due to the opposite types of charge carriers (electrons for NMOS and holes for PMOS) and the different voltage requirements for operation.",
        "format": "markdown",
        "sha256": "2e4fc569724b3150b7b1f32304c68bf3ff54cf72e1665b5b849857f9d7a8a679"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the same small-signal structure and explains that the apparent differences are polarity and sign conventions, consistent with the golden solution.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 411,
        "total_tokens": 438,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 411,
        "total_tokens": 438,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal models of PMOS and NMOS devices are similar but not identical. Both models include parameters such as transconductance (\\(g_m\\)), output conductance (\\(g_{ds}\\)), and capacitances (\\(C_{gs}\\), \\(C_{gd}\\)). However, there are key differences due to the inherent characteristics of PMOS and NMOS transistors:\n\n1. **Polarity of Voltages and Currents**: \n   - In an NMOS transistor, the source is typically connected to the lowest potential (often ground), and the drain is at a higher potential. The gate voltage controls the current flow from drain to source.\n   - In a PMOS transistor, the source is typically connected to the highest potential (often the supply voltage \\(V_{DD}\\)), and the drain is at a lower potential. The gate voltage controls the current flow from source to drain.\n\n2. **Threshold Voltage**:\n   - NMOS transistors have a positive threshold voltage.\n   - PMOS transistors have a negative threshold voltage.\n\n3. **Direction of Current Flow**:\n   - In NMOS transistors, the current flows from drain to source.\n   - In PMOS transistors, the current flows from source to drain.\n\nDespite these differences, the small-signal parameters such as \\(g_m\\), \\(g_{ds}\\), \\(C_{gs}\\), and \\(C_{gd}\\) are defined similarly for both types of transistors. The small-signal equivalent circuits will look similar, but the direction of current flow and the polarity of voltages will be different.\n\nFor example, in the small-signal model:\n- The transconductance \\(g_m\\) represents the change in drain current (\\(I_D\\) for NMOS, \\(I_S\\) for PMOS) with respect to the change in gate-source voltage (\\(V_{GS}\\)).\n- The output conductance \\(g_{ds}\\) represents the change in drain current (\\(I_D\\) for NMOS, \\(I_S\\) for PMOS) with respect to the change in drain-source voltage (\\(V_{DS}\\)).\n\nIn summary, while the small-signal models of PMOS and NMOS devices share similar components and structure, the specific details such as voltage polarities and current directions differ due to the nature of the devices.",
        "format": "markdown",
        "sha256": "5a8c2b656dedd12c64b667d7142288725b1325f05538cce0804b7ffb6c9e7fab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the shared model structure and polarity/sign-convention differences, but its direct conclusion that the models are “not identical” misses the expected answer that they are the same in form with consistent conventions.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 483,
        "total_tokens": 510,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 483,
        "total_tokens": 510,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch \\( I_X \\) versus \\( V_X \\) for the given circuit, we need to understand the behavior of the MOSFET \\( M_1 \\) and how it affects the current \\( I_X \\) as the voltage \\( V_X \\) changes.\n\n### Assumptions:\n1. \\( M_1 \\) is an n-channel MOSFET.\n2. The source of \\( M_1 \\) is grounded.\n3. The gate of \\( M_1 \\) is connected to a fixed voltage (not shown in the diagram).\n\n### Analysis:\n1. **Cutoff Region**: When \\( V_X \\) is less than the threshold voltage \\( V_{th} \\) of the MOSFET, \\( M_1 \\) is off, and \\( I_X \\) is zero.\n2. **Linear (Ohmic) Region**: When \\( V_X \\) is greater than \\( V_{th} \\) but less than \\( V_{GS} - V_{th} \\), \\( M_1 \\) operates in the linear region. The current \\( I_X \\) increases linearly with \\( V_X \\).\n3. **Saturation Region**: When \\( V_X \\) is greater than \\( V_{GS} - V_{th} \\), \\( M_1 \\) operates in the saturation region. The current \\( I_X \\) becomes relatively constant and is determined by the gate-source voltage \\( V_{GS} \\).\n\n### Sketch:\n1. **X-axis**: \\( V_X \\)\n2. **Y-axis**: \\( I_X \\)\n\nThe sketch will have three distinct regions:\n\n1. **Cutoff Region**: For \\( V_X < V_{th} \\), \\( I_X = 0 \\).\n2. **Linear Region**: For \\( V_{th} \\leq V_X < V_{GS} - V_{th} \\), \\( I_X \\) increases linearly with \\( V_X \\).\n3. **Saturation Region**: For \\( V_X \\geq V_{GS} - V_{th} \\), \\( I_X \\) is relatively constant.\n\nHere is a rough sketch:\n\n```\nI_X\n|\n|          Saturation Region\n|          ____________\n|         /            |\n|        /             |\n|       /              |\n|      /               |\n|     /                |\n|    /                 |\n|   /                  |\n|  / Linear Region     |\n| /                    |\n|/                     |\n|___________________________ V_X\n  Cutoff Region\n```\n\nIn this sketch:\n- The cutoff region is flat at \\( I_X = 0 \\).\n- The linear region shows a linear increase in \\( I_X \\) with \\( V_X \\).\n- The saturation region shows \\( I_X \\) leveling off and becoming constant.\n\nThe exact shape and values depend on the specific parameters of the MOSFET, such as the threshold voltage \\( V_{th} \\) and the gate-source voltage \\( V_{GS} \\).",
        "format": "markdown",
        "sha256": "a59dcd12f23715a22d6074f8176f25d60a84a2555eba5a35d73a8b8c2ec80275"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies cutoff below threshold, but misreads the gate connection as a fixed bias. The actual diode-connected NMOS is in saturation above threshold, so IX rises approximately quadratically rather than transitioning through a linear region to a plateau.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1123,
        "output_tokens": 627,
        "total_tokens": 1750,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1123,
        "output_tokens": 627,
        "total_tokens": 1750,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch \\( I_X \\) versus \\( V_X \\) for the given circuit, we need to understand the behavior of the MOSFET \\( M_1 \\) and how it affects the current \\( I_X \\) as the voltage \\( V_X \\) changes.\n\nAssuming \\( M_1 \\) is an n-channel MOSFET, the current \\( I_X \\) through the MOSFET depends on the gate-source voltage \\( V_{GS} \\) and the drain-source voltage \\( V_{DS} \\). In this circuit, \\( V_X \\) is the drain-source voltage \\( V_{DS} \\).\n\n### Key Points to Consider:\n1. **Cutoff Region**: When \\( V_{GS} \\) is less than the threshold voltage \\( V_{th} \\), the MOSFET is off, and \\( I_X \\approx 0 \\).\n2. **Linear (Ohmic) Region**: When \\( V_{GS} > V_{th} \\) and \\( V_{DS} \\) is small, the MOSFET operates in the linear region where \\( I_X \\) increases linearly with \\( V_X \\).\n3. **Saturation Region**: When \\( V_{GS} > V_{th} \\) and \\( V_{DS} \\) is large, the MOSFET operates in the saturation region where \\( I_X \\) is relatively constant and independent of \\( V_X \\).\n\n### Sketching \\( I_X \\) vs. \\( V_X \\):\n1. **Cutoff Region**: For \\( V_X \\) less than the threshold voltage \\( V_{th} \\), \\( I_X \\approx 0 \\).\n2. **Linear Region**: For \\( V_X \\) greater than \\( V_{th} \\) but less than \\( V_{GS} - V_{th} \\), \\( I_X \\) increases linearly with \\( V_X \\).\n3. **Saturation Region**: For \\( V_X \\) greater than \\( V_{GS} - V_{th} \\), \\( I_X \\) becomes relatively constant.\n\n### Example Sketch:\n- **X-axis**: \\( V_X \\)\n- **Y-axis**: \\( I_X \\)\n\n1. **Cutoff Region**: \\( I_X \\approx 0 \\) for \\( V_X < V_{th} \\).\n2. **Linear Region**: \\( I_X \\) increases linearly for \\( V_{th} < V_X < V_{GS} - V_{th} \\).\n3. **Saturation Region**: \\( I_X \\) is constant for \\( V_X > V_{GS} - V_{th} \\).\n\nThe sketch would look like this:\n\n```\nI_X\n|\n|        _________\n|       /         \\\n|      /           \\\n|_____/             \\________\n|\n|____________________________________ V_X\n```\n\n- The flat region at the beginning represents the cutoff region.\n- The linear increase represents the linear region.\n- The flat region at the end represents the saturation region.\n\nThis sketch is a simplified representation and assumes ideal MOSFET behavior. Real MOSFETs may have more complex characteristics.",
        "format": "markdown",
        "sha256": "a57dfecc67960144b00ea74fb24daae27847a7f9ee2809c9969bf6c261517d8d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies near-zero current below threshold, but misses the gate-drain tie: above threshold the diode-connected NMOS is in saturation and current rises quadratically, not linearly and then to a plateau.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1123,
        "output_tokens": 660,
        "total_tokens": 1783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1123,
        "output_tokens": 660,
        "total_tokens": 1783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch \\( I_X \\) versus \\( V_X \\) for the given circuit, we need to understand the behavior of the MOSFET \\( M_1 \\) and how it affects the current \\( I_X \\) as the voltage \\( V_X \\) changes.\n\nAssuming \\( M_1 \\) is an n-channel MOSFET, the current \\( I_X \\) through the MOSFET depends on the gate-source voltage \\( V_{GS} \\) and the drain-source voltage \\( V_{DS} \\). In this circuit, \\( V_X \\) is the drain-source voltage \\( V_{DS} \\).\n\n### Key Points to Consider:\n1. **Cutoff Region**: When \\( V_{GS} \\) is less than the threshold voltage \\( V_{th} \\), the MOSFET is off, and \\( I_X \\approx 0 \\).\n2. **Linear (Ohmic) Region**: When \\( V_{GS} > V_{th} \\) and \\( V_{DS} \\) is small, the MOSFET operates in the linear region where \\( I_X \\) increases linearly with \\( V_X \\).\n3. **Saturation Region**: When \\( V_{GS} > V_{th} \\) and \\( V_{DS} \\) is large, the MOSFET operates in the saturation region where \\( I_X \\) is relatively constant and independent of \\( V_X \\).\n\n### Sketching \\( I_X \\) vs. \\( V_X \\):\n1. **Cutoff Region**: For \\( V_X \\) less than the threshold voltage \\( V_{th} \\), \\( I_X \\approx 0 \\).\n2. **Linear Region**: For \\( V_X \\) greater than \\( V_{th} \\) but less than \\( V_{GS} - V_{th} \\), \\( I_X \\) increases linearly with \\( V_X \\).\n3. **Saturation Region**: For \\( V_X \\) greater than \\( V_{GS} - V_{th} \\), \\( I_X \\) becomes relatively constant.\n\n### Example Sketch:\n- **X-axis**: \\( V_X \\)\n- **Y-axis**: \\( I_X \\)\n\n1. **Cutoff Region**: \\( I_X \\approx 0 \\) for \\( V_X < V_{th} \\).\n2. **Linear Region**: \\( I_X \\) increases linearly for \\( V_{th} < V_X < V_{GS} - V_{th} \\).\n3. **Saturation Region**: \\( I_X \\) is constant for \\( V_X > V_{GS} - V_{th} \\).\n\nThe sketch would look like this:\n\n```\nI_X\n|\n|        _________\n|       /         \\\n|      /           \\\n|_____/             \\________\n|\n|____________________________________ V_X\n```\n\n- The flat region at the beginning represents the cutoff region.\n- The linear increase represents the linear region.\n- The flat region at the end represents the saturation region.\n\nThis sketch is a simplified representation and assumes ideal MOSFET behavior. Real MOSFETs may have more complex characteristics.",
        "format": "markdown",
        "sha256": "a57dfecc67960144b00ea74fb24daae27847a7f9ee2809c9969bf6c261517d8d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies near-zero current below threshold, but misses the gate-drain tie: above threshold the diode-connected NMOS is in saturation and current rises quadratically, not linearly and then to a plateau.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1123,
        "output_tokens": 660,
        "total_tokens": 1783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1123,
        "output_tokens": 660,
        "total_tokens": 1783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch \\( I_X \\) versus \\( V_X \\) for the given circuit, we need to analyze the behavior of the MOSFET \\( M_1 \\) and the voltage source.\n\n### Analysis\n\n1. **MOSFET Operation:**\n   - The MOSFET \\( M_1 \\) is an n-channel MOSFET.\n   - The gate-source voltage \\( V_{GS} \\) is equal to \\( V_X \\).\n   - The drain-source voltage \\( V_{DS} \\) is equal to \\( 1 \\text{V} \\).\n\n2. **MOSFET Regions:**\n   - **Cutoff Region:** When \\( V_{GS} < V_{th} \\), where \\( V_{th} \\) is the threshold voltage, the MOSFET is off, and \\( I_X = 0 \\).\n   - **Linear (Ohmic) Region:** When \\( V_{GS} > V_{th} \\) and \\( V_{DS} < V_{GS} - V_{th} \\), the MOSFET operates in the linear region. The current \\( I_X \\) is given by:\n     \\[\n     I_X = k \\left( (V_{GS} - V_{th})V_{DS} - \\frac{V_{DS}^2}{2} \\right)\n     \\]\n     where \\( k \\) is a constant related to the MOSFET's transconductance.\n   - **Saturation Region:** When \\( V_{GS} > V_{th} \\) and \\( V_{DS} \\geq V_{GS} - V_{th} \\), the MOSFET operates in saturation. The current \\( I_X \\) is given by:\n     \\[\n     I_X = \\frac{k}{2} (V_{GS} - V_{th})^2\n     \\]\n\n### Sketching \\( I_X \\) vs \\( V_X \\)\n\n1. **For \\( V_X < V_{th} \\):**\n   - The MOSFET is in cutoff.\n   - \\( I_X = 0 \\).\n\n2. **For \\( V_X \\geq V_{th} \\):**\n   - The MOSFET enters the saturation region because \\( V_{DS} = 1 \\text{V} \\) is typically larger than \\( V_{GS} - V_{th} \\).\n   - \\( I_X = \\frac{k}{2} (V_X - V_{th})^2 \\).\n\n### Sketch\n\nThe sketch will show \\( I_X \\) starting from zero when \\( V_X \\) is less than \\( V_{th} \\). As \\( V_X \\) increases beyond \\( V_{th} \\), \\( I_X \\) will increase quadratically.\n\nHere is a rough sketch:\n\n```\nI_X\n^\n|                *\n|              *\n|            *\n|          *\n|        *\n|      *\n|    *\n|  *\n|*\n+--------------------> V_X\n         V_th\n```\n\n- The point where the curve starts to rise is at \\( V_{th} \\).\n- The curve rises quadratically for \\( V_X > V_{th} \\).\n\nThis sketch represents the relationship between \\( I_X \\) and \\( V_X \\) for the given circuit.",
        "format": "markdown",
        "sha256": "6734bdfc9d8722e8774afcacfb40a8c6d6eab46b0a1a63a0b6dc875ae32af3d7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies cutoff and the initial quadratic rise, but incorrectly extends saturation for all Vx above threshold. With VDS fixed at 1 V, the device enters triode at Vx = Vth + 1 V, so the curve becomes roughly linear beyond that point.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 688,
        "total_tokens": 1812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 688,
        "total_tokens": 1812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch \\( I_X \\) versus \\( V_X \\) for the given circuit, we need to analyze the behavior of the MOSFET \\( M_1 \\) and the voltage source.\n\n1. **MOSFET Operation Regions**:\n   - **Cutoff Region**: When \\( V_{GS} < V_{th} \\), the MOSFET is off and \\( I_X = 0 \\).\n   - **Linear (Ohmic) Region**: When \\( V_{GS} > V_{th} \\) and \\( V_{DS} < V_{GS} - V_{th} \\), the MOSFET operates in the linear region.\n   - **Saturation Region**: When \\( V_{GS} > V_{th} \\) and \\( V_{DS} \\geq V_{GS} - V_{th} \\), the MOSFET operates in the saturation region.\n\n2. **Voltage Relationships**:\n   - \\( V_{GS} = V_X \\)\n   - \\( V_{DS} = 1V \\) (since the drain is connected to a 1V source)\n\n3. **Current Equations**:\n   - **Cutoff Region**: \\( I_X = 0 \\)\n   - **Linear Region**: \\( I_X = k \\left( (V_X - V_{th})V_{DS} - \\frac{V_{DS}^2}{2} \\right) \\)\n   - **Saturation Region**: \\( I_X = \\frac{k}{2} (V_X - V_{th})^2 \\)\n\nWhere \\( k \\) is a constant related to the MOSFET parameters.\n\n### Sketching \\( I_X \\) vs \\( V_X \\):\n\n1. **For \\( V_X < V_{th} \\)**:\n   - The MOSFET is in the cutoff region.\n   - \\( I_X = 0 \\)\n\n2. **For \\( V_X \\geq V_{th} \\)**:\n   - The MOSFET is in the saturation region because \\( V_{DS} = 1V \\geq V_X - V_{th} \\).\n   - \\( I_X = \\frac{k}{2} (V_X - V_{th})^2 \\)\n\n### Graph:\n\n- **X-axis**: \\( V_X \\)\n- **Y-axis**: \\( I_X \\)\n\n1. **From \\( V_X = 0 \\) to \\( V_X = V_{th} \\)**:\n   - \\( I_X = 0 \\)\n   - The graph is a horizontal line at \\( I_X = 0 \\).\n\n2. **From \\( V_X = V_{th} \\) onwards**:\n   - \\( I_X \\) increases quadratically with \\( V_X \\).\n   - The graph is a parabola starting at \\( V_X = V_{th} \\).\n\n### Example Sketch:\n\n```\nI_X\n|\n|          *\n|         * \n|        *  \n|       *   \n|      *    \n|     *     \n|    *      \n|   *       \n|  *        \n| *         \n|*          \n|________________________\n0   V_th                V_X\n```\n\nIn this sketch:\n- The horizontal line represents the cutoff region where \\( I_X = 0 \\).\n- The parabolic curve represents the saturation region where \\( I_X \\) increases quadratically with \\( V_X \\).",
        "format": "markdown",
        "sha256": "121dff016291a31a9480d1a8879ca1e008fd40e8ceaf4b71a64ff727e8b188cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies cutoff and the initial quadratic saturation-region rise, and gives the triode equation, but incorrectly concludes the device remains in saturation for all VX ≥ Vth. It misses the required transition to an approximately linear rise once VX reaches Vth + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 713,
        "total_tokens": 1837,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 713,
        "total_tokens": 1837,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch \\( I_X \\) versus \\( V_X \\) for the given circuit, we need to analyze the behavior of the MOSFET \\( M_1 \\) in different regions of operation. \n\n### Circuit Analysis\n\n1. **Threshold Voltage \\( V_{th} \\)**: Assume the threshold voltage \\( V_{th} \\) of the MOSFET \\( M_1 \\) is known.\n\n2. **Regions of Operation**:\n   - **Cutoff Region**: When \\( V_X < V_{th} \\), the MOSFET is off, and \\( I_X = 0 \\).\n   - **Linear (Ohmic) Region**: When \\( V_X \\) is slightly greater than \\( V_{th} \\) and \\( V_{DS} \\) is small, the MOSFET operates in the linear region.\n   - **Saturation Region**: When \\( V_X \\) is significantly greater than \\( V_{th} \\), the MOSFET operates in the saturation region.\n\n### Sketching \\( I_X \\) vs \\( V_X \\)\n\n1. **Cutoff Region** (\\( V_X < V_{th} \\)):\n   - \\( I_X = 0 \\)\n\n2. **Linear Region** (\\( V_X \\) slightly greater than \\( V_{th} \\)):\n   - \\( I_X \\) increases linearly with \\( V_X \\).\n\n3. **Saturation Region** (\\( V_X \\) significantly greater than \\( V_{th} \\)):\n   - \\( I_X \\) increases quadratically with \\( V_X \\).\n\n### Plot\n\n- **X-axis**: \\( V_X \\)\n- **Y-axis**: \\( I_X \\)\n\nThe plot will look like this:\n\n1. **For \\( V_X < V_{th} \\)**:\n   - \\( I_X = 0 \\)\n   - The plot is a horizontal line at \\( I_X = 0 \\).\n\n2. **For \\( V_X \\) slightly greater than \\( V_{th} \\)**:\n   - \\( I_X \\) starts to increase linearly.\n   - The plot starts to rise from \\( I_X = 0 \\).\n\n3. **For \\( V_X \\) significantly greater than \\( V_{th} \\)**:\n   - \\( I_X \\) increases quadratically.\n   - The plot curves upwards more steeply.\n\n### Example Sketch\n\n```plaintext\nI_X\n|\n|        /\n|       /\n|      /\n|     /\n|    /\n|   /\n|  /\n| /\n|/\n+------------------ V_X\n```\n\n- The point where the curve starts to rise corresponds to \\( V_{th} \\).\n- The initial linear rise corresponds to the linear region.\n- The steep upward curve corresponds to the saturation region.\n\nThis sketch represents the typical behavior of \\( I_X \\) versus \\( V_X \\) for a MOSFET in the given circuit.",
        "format": "markdown",
        "sha256": "322b1e520e9ca30cef02599155a63f8e626a69831c9e460dd8435f9b8db057cc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies cutoff below threshold, but reverses the operating regions: the current rises quadratically in saturation just above threshold, then becomes roughly linear in triode beyond V_X = V_th + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 606,
        "total_tokens": 1730,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 606,
        "total_tokens": 1730,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the device shown in the figure can act as a current source. The figure depicts a MOSFET (M1) with its gate and drain connected together, and its source connected to ground. This configuration is known as a diode-connected MOSFET.\n\nIn this configuration, the MOSFET operates in saturation mode, where the current through the device (I_x) is relatively constant and primarily determined by the gate-source voltage (V_GS). Since the gate and drain are connected, V_GS is equal to the drain-source voltage (V_DS). This setup allows the MOSFET to act as a current source, providing a stable current (I_x) for a given V_GS.",
        "format": "markdown",
        "sha256": "d6f3f3365ee027673d74e13cadc9e3d55c12fe6ef1e962918ab6302d4eb001ad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly concludes that the diode-connected device can act as a current source. As drawn, M1 is a PMOS with its source at the top; it presents a low small-signal impedance (about 1/gm), not the high impedance of a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 445,
        "output_tokens": 143,
        "total_tokens": 588,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 445,
        "output_tokens": 143,
        "total_tokens": 588,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the device shown in the figure can act as a current source. The figure depicts a MOSFET (M1) with its gate and drain connected together, and its source connected to ground. This configuration is known as a diode-connected MOSFET.\n\nIn this configuration, the MOSFET operates in saturation mode, where the current through the device (I_x) is relatively constant and primarily determined by the gate-source voltage (V_GS). Since the gate and drain are connected, V_GS is equal to the drain-source voltage (V_DS), and the current through the MOSFET is set by the characteristics of the device and the applied voltage.\n\nTherefore, this diode-connected MOSFET can act as a current source, providing a constant current (I_x) for a given gate-source voltage.",
        "format": "markdown",
        "sha256": "960107dcf6d1f9d1a1f9a42afb789c85b5dd1e8917eb86ac01845ed41cb3231c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly concludes that the diode-connected device can act as a current source. As drawn, M1 is a PMOS with its gate and drain grounded; it presents low impedance (about 1/gm), not the high impedance required of a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 445,
        "output_tokens": 165,
        "total_tokens": 610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 445,
        "output_tokens": 165,
        "total_tokens": 610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the device shown in the figure can act as a current source. The figure depicts a MOSFET (M1) with its gate and drain connected together, and its source connected to ground. This configuration is known as a diode-connected MOSFET.\n\nIn this configuration, the MOSFET operates in saturation mode, where the current through the device (I_x) is relatively constant and primarily determined by the gate-source voltage (V_GS). Since the gate and drain are connected, V_GS is equal to the drain-source voltage (V_DS), and the current through the MOSFET is set by the characteristics of the device and the applied voltage.\n\nTherefore, this diode-connected MOSFET can act as a current source, providing a constant current (I_x) for a given gate-source voltage.",
        "format": "markdown",
        "sha256": "960107dcf6d1f9d1a1f9a42afb789c85b5dd1e8917eb86ac01845ed41cb3231c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly concludes that the diode-connected device can act as a current source. As drawn, M1 is a PMOS with its gate and drain grounded; it presents low impedance (about 1/gm), not the high impedance required of a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 445,
        "output_tokens": 165,
        "total_tokens": 610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 445,
        "output_tokens": 165,
        "total_tokens": 610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier using a MOSFET (M1). Let's analyze the circuit step by step:\n\n### Components:\n1. **MOSFET (M1)**: The transistor used for amplification.\n2. **\\( R_S \\)**: Source resistor.\n3. **\\( R_D \\)**: Drain resistor.\n4. **\\( V_{DD} \\)**: Supply voltage.\n5. **\\( V_{in} \\)**: Input voltage.\n6. **\\( V_{out} \\)**: Output voltage.\n\n### Operation:\n1. **Input Stage**:\n   - The input voltage \\( V_{in} \\) is applied to the gate of the MOSFET.\n   - The gate-source voltage \\( V_{GS} \\) controls the current through the MOSFET.\n\n2. **Amplification**:\n   - The MOSFET operates in the saturation region for amplification, where \\( V_{DS} \\) (drain-source voltage) is sufficiently high.\n   - The current through the MOSFET \\( I_D \\) is controlled by \\( V_{GS} \\).\n\n3. **Output Stage**:\n   - The output voltage \\( V_{out} \\) is taken from the drain of the MOSFET.\n   - \\( V_{out} \\) is influenced by the drain current \\( I_D \\) and the drain resistor \\( R_D \\).\n\n### Equations:\n1. **Drain Current \\( I_D \\)**:\n   - In the saturation region, the drain current \\( I_D \\) is given by:\n     \\[\n     I_D = \\frac{1}{2} k' (W/L) (V_{GS} - V_{th})^2\n     \\]\n     where \\( k' \\) is the process transconductance parameter, \\( W \\) is the width of the MOSFET, \\( L \\) is the length of the MOSFET, and \\( V_{th} \\) is the threshold voltage.\n\n2. **Output Voltage \\( V_{out} \\)**:\n   - The output voltage \\( V_{out} \\) is given by:\n     \\[\n     V_{out} = V_{DD} - I_D R_D\n     \\]\n\n### Small-Signal Analysis:\nFor small-signal analysis, we consider the variations around the operating point.\n\n1. **Small-Signal Parameters**:\n   - Transconductance \\( g_m \\):\n     \\[\n     g_m = \\frac{\\partial I_D}{\\partial V_{GS}} = k' (W/L) (V_{GS} - V_{th})\n     \\]\n\n2. **Voltage Gain \\( A_v \\)**:\n   - The voltage gain \\( A_v \\) of the amplifier is given by:\n     \\[\n     A_v = -g_m R_D\n     \\]\n   - The negative sign indicates a phase inversion between the input and output.\n\n### Summary:\n- The circuit is a common-source amplifier using a MOSFET.\n- The input voltage \\( V_{in} \\) controls the gate-source voltage \\( V_{GS} \\).\n- The drain current \\( I_D \\) is a function of \\( V_{GS} \\).\n- The output voltage \\( V_{out} \\) is determined by the drain current \\( I_D \\) and the drain resistor \\( R_D \\).\n- The voltage gain \\( A_v \\) is given by \\( -g_m R_D \\), indicating an inverted output.\n\nThis analysis provides a basic understanding of the operation and characteristics of the common-source MOSFET amplifier.",
        "format": "markdown",
        "sha256": "331958bac1fb0c6d4410749f701d79431362a801add3c568fd50ae414ebcec7f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies a common-source stage and the inverting behavior, but misses the PMOS device and the central effect of source degeneration, giving \u0000-g_mR_D instead of \u0000-g_mR_D/(1+g_mR_S). Its stated DC output relation also does not match the circuit connections.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1120,
        "output_tokens": 741,
        "total_tokens": 1861,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1120,
        "output_tokens": 741,
        "total_tokens": 1861,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier using a MOSFET (M1). Let's analyze the circuit step by step:\n\n### Components:\n1. **MOSFET (M1)**: The transistor used for amplification.\n2. **\\( R_S \\)**: Source resistor.\n3. **\\( R_D \\)**: Drain resistor.\n4. **\\( V_{DD} \\)**: Supply voltage.\n5. **\\( V_{in} \\)**: Input voltage.\n6. **\\( V_{out} \\)**: Output voltage.\n\n### Operation:\n1. **Input Stage**:\n   - The input voltage \\( V_{in} \\) is applied to the gate of the MOSFET.\n   - The gate-source voltage \\( V_{GS} \\) controls the current through the MOSFET.\n\n2. **Amplification**:\n   - The MOSFET operates in the saturation region for amplification, where \\( V_{DS} \\) (drain-source voltage) is sufficiently high.\n   - The current through the MOSFET \\( I_D \\) is controlled by \\( V_{GS} \\).\n\n3. **Output Stage**:\n   - The output voltage \\( V_{out} \\) is taken from the drain of the MOSFET.\n   - \\( V_{out} \\) is influenced by the drain current \\( I_D \\) and the drain resistor \\( R_D \\).\n\n### Equations:\n1. **Drain Current \\( I_D \\)**:\n   - In the saturation region, the drain current \\( I_D \\) is given by:\n     \\[\n     I_D = \\frac{1}{2} k' (W/L) (V_{GS} - V_{th})^2\n     \\]\n     where \\( k' \\) is the process transconductance parameter, \\( W \\) is the width of the MOSFET, \\( L \\) is the length of the MOSFET, and \\( V_{th} \\) is the threshold voltage.\n\n2. **Output Voltage \\( V_{out} \\)**:\n   - The output voltage \\( V_{out} \\) is given by:\n     \\[\n     V_{out} = V_{DD} - I_D R_D\n     \\]\n\n### Small-Signal Analysis:\nFor small-signal analysis, we consider the variations around the operating point.\n\n1. **Small-Signal Model**:\n   - The small-signal drain current \\( i_d \\) is given by:\n     \\[\n     i_d = g_m v_{gs}\n     \\]\n     where \\( g_m \\) is the transconductance and \\( v_{gs} \\) is the small-signal gate-source voltage.\n\n2. **Transconductance \\( g_m \\)**:\n   - The transconductance \\( g_m \\) is given by:\n     \\[\n     g_m = \\frac{\\partial I_D}{\\partial V_{GS}} = k' (W/L) (V_{GS} - V_{th})\n     \\]\n\n3. **Voltage Gain \\( A_v \\)**:\n   - The voltage gain \\( A_v \\) is given by:\n     \\[\n     A_v = -g_m R_D\n     \\]\n\n### Summary:\n- The input voltage \\( V_{in} \\) controls the gate-source voltage \\( V_{GS} \\).\n- The gate-source voltage \\( V_{GS} \\) controls the drain current \\( I_D \\).\n- The drain current \\( I_D \\) through the drain resistor \\( R_D \\) determines the output voltage \\( V_{out} \\).\n- The voltage gain of the amplifier is determined by the transconductance \\( g_m \\) and the drain resistor \\( R_D \\).\n\nThis common-source amplifier provides voltage amplification with the output voltage being inverted relative to the input voltage.",
        "format": "markdown",
        "sha256": "4b1fb8720758caa35255100b174bf0e29d250be1f7d17f652753ccc312d1e14b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes an inverting common-source stage, but ignores the effect of source degeneration and gives the un-degenerated gain −gmRD. It also fails to identify M1 as PMOS.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1120,
        "output_tokens": 789,
        "total_tokens": 1909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1120,
        "output_tokens": 789,
        "total_tokens": 1909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier using a MOSFET (M1). Let's analyze the circuit step by step:\n\n### Components:\n1. **MOSFET (M1)**: The transistor used for amplification.\n2. **\\( R_S \\)**: Source resistor.\n3. **\\( R_D \\)**: Drain resistor.\n4. **\\( V_{DD} \\)**: Supply voltage.\n5. **\\( V_{in} \\)**: Input voltage.\n6. **\\( V_{out} \\)**: Output voltage.\n\n### Operation:\n1. **Input Signal (\\( V_{in} \\))**:\n   - The input signal \\( V_{in} \\) is applied to the gate of the MOSFET.\n   - The gate-source voltage \\( V_{GS} \\) controls the current through the MOSFET.\n\n2. **MOSFET Behavior**:\n   - When \\( V_{GS} \\) exceeds the threshold voltage \\( V_{th} \\), the MOSFET turns on and allows current to flow from the drain to the source.\n   - The current through the MOSFET is given by \\( I_D \\).\n\n3. **Drain Current (\\( I_D \\))**:\n   - The drain current \\( I_D \\) flows through the drain resistor \\( R_D \\).\n   - The voltage drop across \\( R_D \\) is \\( V_{RD} = I_D \\cdot R_D \\).\n\n4. **Output Voltage (\\( V_{out} \\))**:\n   - The output voltage \\( V_{out} \\) is taken from the drain of the MOSFET.\n   - \\( V_{out} = V_{DD} - V_{RD} \\).\n\n### Analysis:\n1. **DC Biasing**:\n   - To ensure proper operation, the MOSFET must be biased correctly.\n   - The gate-source voltage \\( V_{GS} \\) must be set such that the MOSFET operates in the saturation region for amplification.\n\n2. **AC Analysis**:\n   - For small signal analysis, the MOSFET can be modeled using its small-signal parameters.\n   - The small-signal voltage gain \\( A_v \\) of the amplifier is given by:\n     \\[\n     A_v = -\\frac{g_m \\cdot R_D}{1 + g_m \\cdot R_S}\n     \\]\n     where \\( g_m \\) is the transconductance of the MOSFET.\n\n3. **Impedance**:\n   - The input impedance of the amplifier is high due to the gate of the MOSFET.\n   - The output impedance is primarily determined by \\( R_D \\).\n\n### Summary:\n- The common-source amplifier amplifies the input signal \\( V_{in} \\) and produces an inverted output signal \\( V_{out} \\).\n- The gain and operation of the amplifier depend on the MOSFET parameters and the values of \\( R_S \\) and \\( R_D \\).\n- Proper biasing is crucial for the MOSFET to operate in the desired region for amplification.",
        "format": "markdown",
        "sha256": "ee5583f410308137681cae1fbb2e19db34bffa376ae9e072dc36c36a54c79b01"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies a common-source stage with source degeneration and gives the inverting gain. It does not identify M1 as PMOS, and its drain-to-source current description and Vout expression do not match the circuit.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1120,
        "output_tokens": 639,
        "total_tokens": 1759,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1120,
        "output_tokens": 639,
        "total_tokens": 1759,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a common-source MOSFET amplifier with a source resistor \\( R_S \\). Let's analyze the circuit step by step.\n\n### Components:\n1. **MOSFET \\( M_1 \\)**: This is the main active device in the circuit.\n2. **\\( R_S \\)**: Source resistor.\n3. **\\( V_{DD} \\)**: Supply voltage.\n4. **\\( V_{in} \\)**: Input voltage.\n5. **\\( V_{out} \\)**: Output voltage.\n\n### Operation:\n1. **Biasing**:\n   - The MOSFET \\( M_1 \\) is biased by the voltage \\( V_{DD} \\).\n   - The gate-source voltage \\( V_{GS} \\) controls the current through the MOSFET.\n\n2. **Input**:\n   - The input voltage \\( V_{in} \\) is applied to the gate of the MOSFET.\n   - \\( V_{in} \\) modulates the gate-source voltage \\( V_{GS} \\).\n\n3. **Output**:\n   - The output voltage \\( V_{out} \\) is taken from the drain of the MOSFET.\n   - \\( V_{out} \\) is influenced by the drain current \\( I_D \\) and the source resistor \\( R_S \\).\n\n### Analysis:\n1. **DC Analysis**:\n   - The DC operating point is determined by the biasing conditions.\n   - The gate current \\( I_G \\) is negligible for MOSFETs, so \\( V_{GS} \\approx V_{in} \\).\n   - The drain current \\( I_D \\) can be expressed as:\n     \\[\n     I_D = \\frac{V_{DD} - V_{out}}{R_S}\n     \\]\n   - The MOSFET operates in the saturation region if \\( V_{DS} > V_{GS} - V_{th} \\), where \\( V_{DS} = V_{out} \\) and \\( V_{th} \\) is the threshold voltage.\n\n2. **AC Analysis**:\n   - For small signal analysis, the MOSFET can be modeled using its small signal parameters.\n   - The small signal transconductance \\( g_m \\) is given by:\n     \\[\n     g_m = \\frac{\\partial I_D}{\\partial V_{GS}}\n     \\]\n   - The output voltage \\( V_{out} \\) is related to the input voltage \\( V_{in} \\) by the gain of the amplifier:\n     \\[\n     V_{out} = -g_m R_S V_{in}\n     \\]\n   - The negative sign indicates a phase inversion typical of common-source amplifiers.\n\n### Summary:\n- The circuit is a common-source MOSFET amplifier with a source resistor \\( R_S \\).\n- The input voltage \\( V_{in} \\) modulates the gate-source voltage \\( V_{GS} \\), controlling the drain current \\( I_D \\).\n- The output voltage \\( V_{out} \\) is taken from the drain and is influenced by the drain current and the source resistor.\n- The amplifier provides a voltage gain given by \\( -g_m R_S \\), indicating a phase inversion.\n\nThis analysis provides a basic understanding of the operation and characteristics of the common-source MOSFET amplifier with a source resistor.",
        "format": "markdown",
        "sha256": "b573deb5393a71c41f04da134ad5eee6e670ca0c305722e9ff4833c1275ef720"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the source follower as a common-source stage, places the output at the drain instead of the source, and gives the wrong negative gain. Its central circuit analysis is therefore incorrect.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 691,
        "total_tokens": 1471,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 691,
        "total_tokens": 1471,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source MOSFET amplifier with source degeneration. Let's analyze the circuit step by step.\n\n### Components:\n1. **MOSFET (M1)**: This is the main active device in the circuit.\n2. **\\( R_S \\)**: Source resistor, which provides negative feedback and stabilizes the operating point.\n3. **\\( V_{DD} \\)**: Supply voltage.\n4. **\\( V_{in} \\)**: Input voltage.\n5. **\\( V_{out} \\)**: Output voltage.\n\n### Operation:\n1. **Biasing**:\n   - The MOSFET needs to be properly biased to operate in the saturation region for amplification.\n   - The gate-source voltage \\( V_{GS} \\) controls the current through the MOSFET.\n\n2. **DC Analysis**:\n   - The DC operating point is determined by the gate-source voltage \\( V_{GS} \\) and the drain current \\( I_D \\).\n   - The voltage at the source \\( V_S \\) is given by \\( V_S = I_D \\cdot R_S \\).\n   - The drain voltage \\( V_D \\) is given by \\( V_D = V_{DD} - I_D \\cdot R_D \\) (where \\( R_D \\) is the drain resistor, which is not shown in the figure but typically exists in such circuits).\n\n3. **AC Analysis**:\n   - For small signal analysis, the MOSFET can be modeled using its small-signal parameters.\n   - The transconductance \\( g_m \\) is given by \\( g_m = \\frac{\\partial I_D}{\\partial V_{GS}} \\).\n   - The output voltage \\( V_{out} \\) is influenced by the input voltage \\( V_{in} \\) and the gain of the amplifier.\n\n### Gain Calculation:\n1. **Small-Signal Model**:\n   - The small-signal voltage gain \\( A_v \\) of the amplifier can be approximated by considering the small-signal equivalent circuit.\n   - The voltage gain \\( A_v \\) is given by:\n     \\[\n     A_v = \\frac{V_{out}}{V_{in}} = -\\frac{g_m \\cdot R_D}{1 + g_m \\cdot R_S}\n     \\]\n   - Here, \\( R_D \\) is the drain resistor, which is typically present in such circuits but not shown in the figure.\n\n2. **Source Degeneration**:\n   - The source resistor \\( R_S \\) provides negative feedback, which reduces the gain but improves linearity and stability.\n   - The effective transconductance \\( g_m' \\) is given by:\n     \\[\n     g_m' = \\frac{g_m}{1 + g_m \\cdot R_S}\n     \\]\n\n### Summary:\n- The circuit is a common-source amplifier with source degeneration.\n- The source resistor \\( R_S \\) stabilizes the operating point and improves linearity.\n- The voltage gain is reduced due to the source degeneration but is more stable and linear.\n\nTo fully analyze the circuit, specific values for \\( V_{DD} \\), \\( R_S \\), \\( g_m \\), and other parameters would be needed.",
        "format": "markdown",
        "sha256": "e45d4424aed2b65aef6d0eecd3289bab79b50c67e6e05f0bb257c5bd9c993cda"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is a source follower, but the answer misidentifies it as a common-source amplifier and applies an inapplicable negative-gain formula, even inventing a drain resistor not shown. Its generic comments about source degeneration do not analyze the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 672,
        "total_tokens": 1452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 672,
        "total_tokens": 1452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source MOSFET amplifier with source degeneration. Let's analyze the circuit step by step.\n\n### Components:\n1. **MOSFET (M1)**: This is the main active device in the circuit.\n2. **\\( R_S \\)**: Source resistor, which provides negative feedback and stabilizes the operating point.\n3. **\\( V_{DD} \\)**: Supply voltage.\n4. **\\( V_{in} \\)**: Input voltage.\n5. **\\( V_{out} \\)**: Output voltage.\n\n### Operation:\n1. **Biasing**:\n   - The MOSFET needs to be properly biased to operate in the saturation region for amplification.\n   - The gate-source voltage \\( V_{GS} \\) controls the current through the MOSFET.\n\n2. **DC Analysis**:\n   - The DC operating point is determined by the gate-source voltage \\( V_{GS} \\) and the drain current \\( I_D \\).\n   - The voltage at the source \\( V_S \\) is given by \\( V_S = I_D R_S \\).\n   - The drain voltage \\( V_D \\) is given by \\( V_D = V_{DD} - I_D R_D \\), where \\( R_D \\) is the drain resistor (if present).\n\n3. **AC Analysis**:\n   - For small signal analysis, the MOSFET can be modeled using its small-signal parameters.\n   - The transconductance \\( g_m \\) is given by \\( g_m = \\frac{\\partial I_D}{\\partial V_{GS}} \\).\n   - The small-signal output voltage \\( V_{out} \\) can be found using the small-signal model.\n\n### Small-Signal Model:\n1. **Input Impedance**:\n   - The input impedance is primarily determined by the gate resistance, which is typically very high.\n\n2. **Output Impedance**:\n   - The output impedance is affected by the source resistor \\( R_S \\) and the intrinsic output resistance of the MOSFET.\n\n3. **Voltage Gain**:\n   - The voltage gain \\( A_v \\) of the amplifier can be approximated as:\n     \\[\n     A_v = \\frac{V_{out}}{V_{in}} \\approx -g_m \\left( \\frac{R_D}{1 + g_m R_S} \\right)\n     \\]\n   - The negative sign indicates a phase inversion between the input and output.\n\n### Summary:\n- The common-source amplifier with source degeneration provides stable gain and improved linearity due to the negative feedback introduced by \\( R_S \\).\n- The voltage gain is reduced compared to a common-source amplifier without source degeneration, but the trade-off is improved stability and linearity.\n\nTo fully analyze the circuit, specific values for \\( V_{DD} \\), \\( R_S \\), and the MOSFET parameters (such as \\( g_m \\) and \\( V_{th} \\)) are needed.",
        "format": "markdown",
        "sha256": "7552f16608b725bebc48802a2157f12bc381733a575bd4cbbaed8e94c6d244df"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is a source follower with output at the source and positive gain below unity. The answer misidentifies it as a common-source stage, assumes a drain output, and gives the wrong negative-gain expression.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 614,
        "total_tokens": 1394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 614,
        "total_tokens": 1394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier using a MOSFET (M1). Let's analyze the circuit step by step:\n\n### Components:\n1. **MOSFET (M1)**: This is the active device that amplifies the input signal.\n2. **Resistor (R_D)**: This resistor is connected to the drain of the MOSFET and serves as the load resistor.\n3. **Power Supply (V_DD)**: This provides the necessary voltage for the circuit to operate.\n4. **Input Voltage (V_in)**: This is the signal that is to be amplified.\n5. **Output Voltage (V_out)**: This is the amplified signal.\n\n### Operation:\n1. **Biasing**:\n   - The MOSFET needs to be properly biased to operate in the saturation region for amplification.\n   - The gate-source voltage (V_GS) controls the current through the MOSFET.\n\n2. **Input Signal (V_in)**:\n   - The input signal is applied to the gate of the MOSFET.\n   - The gate-source voltage (V_GS) is given by \\( V_{GS} = V_{in} \\).\n\n3. **Output Signal (V_out)**:\n   - The output voltage is taken from the drain of the MOSFET.\n   - The drain current (I_D) flows through the load resistor (R_D), creating a voltage drop across R_D.\n   - The output voltage is given by \\( V_{out} = V_{DD} - I_D \\cdot R_D \\).\n\n### Analysis:\n1. **MOSFET Operation**:\n   - For the MOSFET to be in saturation, \\( V_{DS} \\) (drain-source voltage) must be greater than \\( V_{GS} - V_{th} \\), where \\( V_{th} \\) is the threshold voltage of the MOSFET.\n   - \\( V_{DS} = V_{out} \\).\n\n2. **Drain Current (I_D)**:\n   - In saturation, the drain current \\( I_D \\) is given by:\n     \\[\n     I_D = \\frac{1}{2} k' (W/L) (V_{GS} - V_{th})^2\n     \\]\n     where \\( k' \\) is the process transconductance parameter, and \\( W/L \\) is the width-to-length ratio of the MOSFET.\n\n3. **Output Voltage (V_out)**:\n   - The output voltage can be expressed as:\n     \\[\n     V_{out} = V_{DD} - I_D \\cdot R_D\n     \\]\n   - Substituting \\( I_D \\) from the above equation:\n     \\[\n     V_{out} = V_{DD} - \\frac{1}{2} k' (W/L) (V_{GS} - V_{th})^2 \\cdot R_D\n     \\]\n\n### Summary:\n- The input voltage \\( V_{in} \\) controls the gate-source voltage \\( V_{GS} \\).\n- The gate-source voltage \\( V_{GS} \\) controls the drain current \\( I_D \\).\n- The drain current \\( I_D \\) through the load resistor \\( R_D \\) determines the output voltage \\( V_{out} \\).\n\nThis circuit amplifies the input signal \\( V_{in} \\) and produces an output signal \\( V_{out} \\) that is a function of the input signal, the MOSFET parameters, and the load resistor.",
        "format": "markdown",
        "sha256": "13ea78c9d2766e01679a4d0e7447a41bc5294729fdf614ba323858b612641c14"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology: Vin is applied to the source while the gate is AC-grounded, making this a common-gate stage. Its gate-input analysis therefore misses the essential circuit behavior.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 734,
        "total_tokens": 1514,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 734,
        "total_tokens": 1514,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier using an n-channel MOSFET (M1). Let's analyze the circuit step by step:\n\n### Components:\n1. **MOSFET (M1)**: This is the active device that amplifies the input signal.\n2. **Resistor (R_D)**: This resistor is connected to the drain of the MOSFET and serves as the load resistor.\n3. **Power Supply (V_DD)**: This is the DC power supply that provides the necessary voltage for the circuit.\n4. **Input Voltage (V_in)**: This is the signal that is to be amplified.\n5. **Output Voltage (V_out)**: This is the amplified signal.\n\n### Operation:\n1. **Biasing**:\n   - The MOSFET needs to be properly biased to operate in the saturation region for amplification.\n   - The gate-source voltage (V_GS) controls the operation of the MOSFET. For an n-channel MOSFET, V_GS must be greater than the threshold voltage (V_th) for the MOSFET to turn on.\n\n2. **Input Signal (V_in)**:\n   - The input signal (V_in) is applied to the gate of the MOSFET.\n   - As V_in increases, V_GS increases, causing the MOSFET to conduct more current from drain to source.\n\n3. **Output Signal (V_out)**:\n   - The output voltage (V_out) is taken from the drain of the MOSFET.\n   - The current through the MOSFET (I_D) flows through the load resistor (R_D), creating a voltage drop across R_D.\n   - The output voltage (V_out) is given by \\( V_{out} = V_{DD} - I_D \\cdot R_D \\).\n\n### Amplification:\n- When V_in increases, V_GS increases, causing I_D to increase.\n- As I_D increases, the voltage drop across R_D increases, causing V_out to decrease.\n- Therefore, the output voltage (V_out) is inversely related to the input voltage (V_in), resulting in an amplified but inverted signal.\n\n### Mathematical Analysis:\n1. **MOSFET Current (I_D)**:\n   - In the saturation region, the drain current (I_D) is given by:\n     \\[\n     I_D = \\frac{1}{2} k_n (V_{GS} - V_{th})^2\n     \\]\n     where \\( k_n \\) is the process transconductance parameter.\n\n2. **Output Voltage (V_out)**:\n   - The output voltage is given by:\n     \\[\n     V_{out} = V_{DD} - I_D \\cdot R_D\n     \\]\n   - Substituting \\( I_D \\):\n     \\[\n     V_{out} = V_{DD} - \\frac{1}{2} k_n (V_{GS} - V_{th})^2 \\cdot R_D\n     \\]\n\n### Summary:\n- The circuit is a common-source amplifier with an n-channel MOSFET.\n- The input signal (V_in) is applied to the gate, and the output signal (V_out) is taken from the drain.\n- The output signal is an amplified and inverted version of the input signal.\n- Proper biasing is required to ensure the MOSFET operates in the saturation region for effective amplification.",
        "format": "markdown",
        "sha256": "e4adcfa99e208985bbfd4c6d29f478e5503ef8ee0476c9d2935ce27fcb3d941f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the source input as a gate input, so it analyzes a common-source stage instead of the common-gate stage. Its predicted inversion is also opposite to the correct non-inverting gain.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 709,
        "total_tokens": 1489,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 709,
        "total_tokens": 1489,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier using an n-channel MOSFET (M1). Let's analyze the circuit step by step:\n\n### Components:\n1. **MOSFET (M1)**: This is the active device that controls the current flow from drain to source based on the gate voltage (\\(V_{in}\\)).\n2. **Resistor (\\(R_D\\))**: This resistor is connected between the drain of the MOSFET and the supply voltage (\\(V_{DD}\\)). It converts the current flowing through the MOSFET into a voltage.\n3. **Supply Voltage (\\(V_{DD}\\))**: This is the positive supply voltage.\n4. **Input Voltage (\\(V_{in}\\))**: This is the voltage applied to the gate of the MOSFET.\n\n### Operation:\n1. **MOSFET Behavior**:\n   - When \\(V_{in}\\) is applied to the gate of the MOSFET, it controls the current \\(I_D\\) flowing from the drain to the source.\n   - The relationship between \\(V_{in}\\) and \\(I_D\\) depends on the MOSFET's characteristics and the region of operation (cutoff, triode, or saturation).\n\n2. **Regions of Operation**:\n   - **Cutoff Region**: When \\(V_{in}\\) is less than the threshold voltage (\\(V_{th}\\)), the MOSFET is off, and \\(I_D \\approx 0\\). In this case, \\(V_{out} \\approx V_{DD}\\).\n   - **Triode Region**: When \\(V_{in}\\) is greater than \\(V_{th}\\) but \\(V_{DS}\\) (drain-source voltage) is small, the MOSFET operates in the linear region. The current \\(I_D\\) is proportional to \\(V_{DS}\\).\n   - **Saturation Region**: When \\(V_{in}\\) is greater than \\(V_{th}\\) and \\(V_{DS}\\) is large enough, the MOSFET operates in saturation. The current \\(I_D\\) is relatively constant and depends on \\(V_{in}\\).\n\n3. **Output Voltage (\\(V_{out}\\))**:\n   - The output voltage is given by \\(V_{out} = V_{DD} - I_D R_D\\).\n   - As \\(V_{in}\\) increases, \\(I_D\\) increases, causing a larger voltage drop across \\(R_D\\), which decreases \\(V_{out}\\).\n\n### Small-Signal Analysis:\nFor small variations in \\(V_{in}\\), the MOSFET can be approximated as a linear device. The small-signal gain \\(A_v\\) of the amplifier can be derived as follows:\n\n\\[ A_v = \\frac{V_{out}}{V_{in}} = -g_m R_D \\]\n\nwhere \\(g_m\\) is the transconductance of the MOSFET, defined as:\n\n\\[ g_m = \\frac{\\partial I_D}{\\partial V_{in}} \\]\n\n### Summary:\n- The circuit is a common-source amplifier.\n- The output voltage \\(V_{out}\\) is inversely related to the input voltage \\(V_{in}\\).\n- The gain of the amplifier is determined by the transconductance of the MOSFET and the drain resistor \\(R_D\\).\n\nThis analysis provides a basic understanding of the circuit's operation and behavior. For more detailed analysis, including frequency response and stability, additional considerations such as parasitic capacitances and feedback might be necessary.",
        "format": "markdown",
        "sha256": "44c056decf27d9fa5a866135022a5a3b274e185d2fc60ef4506aa0dee504736d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the source input and grounded gate as a common-source stage, so it gives the wrong gain sign and analyzes the wrong topology.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 744,
        "total_tokens": 1524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 744,
        "total_tokens": 1524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier using a MOSFET (M1). Let's analyze the circuit step by step:\n\n### Components:\n1. **MOSFET (M1)**: This is the main amplifying device.\n2. **Resistor (RD)**: This resistor is connected to the drain of the MOSFET and serves as the load resistor.\n3. **Capacitor (C1)**: This capacitor is used for AC coupling, allowing AC signals to pass while blocking DC.\n4. **Voltage Source (VDD)**: This is the supply voltage.\n5. **Input Voltage (Vin)**: This is the AC signal input.\n6. **Bias Voltage (Vb)**: This is the DC bias voltage applied to the gate of the MOSFET.\n\n### Operation:\n1. **Biasing**:\n   - The gate of the MOSFET is biased with a DC voltage \\( V_b \\). This sets the operating point of the MOSFET.\n   - The source of the MOSFET is connected to ground.\n\n2. **AC Signal Coupling**:\n   - The input AC signal \\( V_{in} \\) is coupled to the gate of the MOSFET through the capacitor \\( C_1 \\). This ensures that the DC biasing is not affected by the AC signal.\n\n3. **Amplification**:\n   - When an AC signal \\( V_{in} \\) is applied, it modulates the gate voltage of the MOSFET.\n   - The MOSFET operates in the saturation region, where the drain current \\( I_D \\) is a function of the gate-source voltage \\( V_{GS} \\).\n   - The drain current \\( I_D \\) flows through the load resistor \\( R_D \\), creating a voltage drop across \\( R_D \\).\n\n4. **Output Voltage**:\n   - The output voltage \\( V_{out} \\) is taken from the drain of the MOSFET.\n   - \\( V_{out} \\) is given by \\( V_{out} = V_{DD} - I_D R_D \\).\n   - As \\( V_{GS} \\) varies due to the input signal \\( V_{in} \\), \\( I_D \\) varies, causing \\( V_{out} \\) to vary accordingly.\n\n### Small-Signal Analysis:\nFor small-signal analysis, we consider the AC components and ignore the DC biasing:\n\n1. **Small-Signal Model**:\n   - The MOSFET can be modeled using its small-signal parameters: transconductance \\( g_m \\) and output resistance \\( r_o \\).\n   - The small-signal drain current \\( i_d \\) is given by \\( i_d = g_m v_{gs} \\).\n\n2. **Voltage Gain**:\n   - The voltage gain \\( A_v \\) of the amplifier is given by:\n     \\[\n     A_v = -g_m R_D\n     \\]\n   - The negative sign indicates a phase inversion between the input and output signals.\n\n### Summary:\n- The circuit is a common-source amplifier.\n- The MOSFET amplifies the input AC signal \\( V_{in} \\).\n- The output voltage \\( V_{out} \\) is taken from the drain of the MOSFET and is inverted relative to the input signal.\n- The voltage gain is determined by the transconductance \\( g_m \\) of the MOSFET and the load resistor \\( R_D \\).\n\nThis analysis provides a basic understanding of the operation and characteristics of the common-source amplifier circuit shown in the figure.",
        "format": "markdown",
        "sha256": "47f167700049f12edc90102487c684656975a8dc56f74f9c78bb4e5d8f3467df"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the input as coupled to the gate and calls the circuit common-source. It misses that Vin is applied to the source node, which is directly shorted to ground, so the ideal gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 738,
        "total_tokens": 1518,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 738,
        "total_tokens": 1518,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier using a MOSFET (M1). Let's analyze the circuit step by step:\n\n### Components:\n1. **MOSFET (M1)**: This is the main amplifying device.\n2. **Resistor (RD)**: This resistor is connected to the drain of the MOSFET and serves as the load resistor.\n3. **Capacitor (C1)**: This capacitor is used for AC coupling, allowing AC signals to pass while blocking DC components.\n4. **Voltage Source (VDD)**: This is the supply voltage.\n5. **Input Voltage (Vin)**: This is the AC signal input.\n6. **Bias Voltage (Vb)**: This is the gate bias voltage.\n\n### Operation:\n1. **Biasing**:\n   - The gate of the MOSFET (M1) is biased with a DC voltage \\( V_b \\). This sets the operating point of the MOSFET.\n   - The source of the MOSFET is connected to ground.\n\n2. **AC Signal Coupling**:\n   - The input AC signal \\( V_{in} \\) is coupled to the gate of the MOSFET through the capacitor \\( C_1 \\). This ensures that the DC bias point is not disturbed by the AC signal.\n\n3. **Amplification**:\n   - When an AC signal \\( V_{in} \\) is applied, it modulates the gate voltage of the MOSFET.\n   - The MOSFET operates in the saturation region if properly biased, and the drain current \\( I_D \\) changes according to the gate-source voltage \\( V_{GS} \\).\n   - The varying drain current through \\( R_D \\) causes a varying voltage drop across \\( R_D \\), resulting in an amplified output voltage \\( V_{out} \\).\n\n### Output Voltage:\nThe output voltage \\( V_{out} \\) can be expressed as:\n\\[ V_{out} = V_{DD} - I_D R_D \\]\n\nWhere \\( I_D \\) is the drain current, which is a function of the gate-source voltage \\( V_{GS} \\).\n\n### Small-Signal Analysis:\nFor small-signal analysis, the MOSFET can be modeled using its small-signal parameters:\n- \\( g_m \\): Transconductance of the MOSFET.\n- \\( r_o \\): Output resistance of the MOSFET (often neglected in basic analysis).\n\nThe small-signal output voltage \\( v_{out} \\) can be approximated as:\n\\[ v_{out} \\approx -g_m v_{gs} R_D \\]\n\nWhere:\n- \\( v_{gs} \\) is the small-signal gate-source voltage.\n- \\( g_m \\) is the transconductance, defined as \\( g_m = \\frac{\\partial I_D}{\\partial V_{GS}} \\).\n\n### Summary:\n- The circuit is a common-source amplifier.\n- The input AC signal \\( V_{in} \\) is coupled to the gate of the MOSFET through \\( C_1 \\).\n- The MOSFET amplifies the signal, and the amplified output is taken from the drain.\n- The resistor \\( R_D \\) serves as the load resistor, converting the varying drain current into a varying output voltage.\n- The bias voltage \\( V_b \\) sets the operating point of the MOSFET.\n\nThis configuration is widely used in analog electronics for signal amplification.",
        "format": "markdown",
        "sha256": "e2ced3a3a9a12e5336c947d3897aca0a87cbad8fa12faabc4d325d32920a599b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the input as coupled to the gate and calls the circuit common-source, missing that Vin is applied to the source node that is shorted to ground.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 710,
        "total_tokens": 1490,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 710,
        "total_tokens": 1490,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier using a MOSFET (M1). Let's analyze the circuit step by step:\n\n### Components:\n1. **MOSFET (M1)**: This is the main amplifying device.\n2. **Resistor (RD)**: This resistor is connected to the drain of the MOSFET and serves as the load resistor.\n3. **Capacitor (C1)**: This capacitor is used for AC coupling, allowing AC signals to pass while blocking DC.\n4. **Voltage Source (VDD)**: This is the supply voltage.\n5. **Input Voltage (Vin)**: This is the AC signal input.\n6. **Bias Voltage (Vb)**: This is the DC bias voltage applied to the gate of the MOSFET.\n\n### Operation:\n1. **Biasing**:\n   - The gate of the MOSFET is biased with a DC voltage \\( V_b \\). This sets the operating point of the MOSFET.\n   - The source of the MOSFET is connected to ground.\n\n2. **AC Signal Coupling**:\n   - The input AC signal \\( V_{in} \\) is coupled to the gate of the MOSFET through the capacitor \\( C_1 \\). This ensures that the DC biasing is not affected by the AC signal.\n\n3. **Amplification**:\n   - When an AC signal \\( V_{in} \\) is applied, it modulates the gate voltage of the MOSFET.\n   - The MOSFET operates in the saturation region if properly biased, and the drain current \\( I_D \\) is controlled by the gate-source voltage \\( V_{GS} \\).\n   - The drain current \\( I_D \\) flows through the load resistor \\( R_D \\), creating a voltage drop across \\( R_D \\).\n\n4. **Output Voltage**:\n   - The output voltage \\( V_{out} \\) is taken from the drain of the MOSFET.\n   - \\( V_{out} \\) is given by \\( V_{out} = V_{DD} - I_D R_D \\).\n   - As \\( V_{GS} \\) changes due to the input signal \\( V_{in} \\), \\( I_D \\) changes, causing \\( V_{out} \\) to vary.\n\n### Small-Signal Analysis:\nFor small-signal analysis, we consider the AC components and ignore the DC biasing:\n\n1. **Small-Signal Model**:\n   - The MOSFET can be modeled using its small-signal parameters: transconductance \\( g_m \\) and output resistance \\( r_o \\).\n   - The small-signal drain current \\( i_d \\) is given by \\( i_d = g_m v_{gs} \\).\n\n2. **Voltage Gain**:\n   - The voltage gain \\( A_v \\) of the amplifier is given by \\( A_v = -g_m R_D \\).\n   - The negative sign indicates a phase inversion between the input and output signals.\n\n### Summary:\n- The circuit is a common-source amplifier with a MOSFET.\n- The input AC signal is coupled through a capacitor to the gate of the MOSFET.\n- The MOSFET amplifies the signal, and the output is taken from the drain.\n- The voltage gain is determined by the transconductance of the MOSFET and the load resistor.\n\nThis analysis provides a basic understanding of the operation and characteristics of the common-source amplifier circuit shown in the figure.",
        "format": "markdown",
        "sha256": "80693c89c5c93c012b4b49802f318a4904714a60bec565d45bf9dab97366f8c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misreads the input as coupled to the gate and analyzes a common-source amplifier, overlooking that the input is applied to the source node shorted to ground. The ideal gain is therefore zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 719,
        "total_tokens": 1499,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 719,
        "total_tokens": 1499,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a MOSFET. The capacitors \\(C_{GS}\\), \\(C_{GD}\\), \\(C_{DB}\\), and \\(C_{SB}\\) represent the parasitic capacitances of the MOSFET. \n\nTo determine the number of poles in the circuit, we need to consider the frequency response of the circuit. Each capacitor in the circuit introduces a pole in the frequency response. \n\nThe capacitors in the circuit are:\n1. \\(C_{GS}\\) - Gate-to-Source capacitance\n2. \\(C_{GD}\\) - Gate-to-Drain capacitance\n3. \\(C_{DB}\\) - Drain-to-Bulk capacitance\n4. \\(C_{SB}\\) - Source-to-Bulk capacitance\n\nEach of these capacitors will introduce a pole in the frequency response of the circuit. Therefore, the circuit has 4 poles.",
        "format": "markdown",
        "sha256": "16be85d51eb521a5c80b67ea8301a9873f1d2a3bf4a74814986e03f16d88e795"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the MOSFET parasitic capacitors, but incorrectly assumes each capacitor creates a pole. Since the source and bulk are grounded and the other capacitor voltages are constrained, the circuit has two poles, not four.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 191,
        "total_tokens": 975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 191,
        "total_tokens": 975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a MOSFET. The capacitors \\(C_{GS}\\), \\(C_{GD}\\), \\(C_{DB}\\), and \\(C_{SB}\\) represent the parasitic capacitances of the MOSFET. \n\nTo determine the number of poles in the circuit, we need to consider the frequency response of the circuit. Each capacitor introduces a pole in the frequency response. \n\nThe capacitors in the circuit are:\n1. \\(C_{GS}\\) - Gate-to-Source capacitance\n2. \\(C_{GD}\\) - Gate-to-Drain capacitance\n3. \\(C_{DB}\\) - Drain-to-Bulk capacitance\n4. \\(C_{SB}\\) - Source-to-Bulk capacitance\n\nEach of these capacitors will introduce a pole in the frequency response of the circuit. Therefore, the circuit has 4 poles.",
        "format": "markdown",
        "sha256": "48ae694885ac65f1344746760306e639466d73ad20dcec2db024ac0627526d86"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer identifies the common-source stage and its capacitors, but incorrectly counts one pole per capacitor. The circuit has two poles: CSB is shorted out, and only two capacitor voltages are independent.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 188,
        "total_tokens": 972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 188,
        "total_tokens": 972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a MOSFET. The capacitors \\(C_{GS}\\), \\(C_{GD}\\), \\(C_{DB}\\), and \\(C_{SB}\\) represent the parasitic capacitances of the MOSFET. \n\nTo determine the number of poles in the circuit, we need to consider the frequency response of the circuit. Each capacitor introduces a pole in the frequency response. \n\nThe capacitors in the circuit are:\n1. \\(C_{GS}\\) - Gate-to-Source capacitance\n2. \\(C_{GD}\\) - Gate-to-Drain capacitance\n3. \\(C_{DB}\\) - Drain-to-Bulk capacitance\n4. \\(C_{SB}\\) - Source-to-Bulk capacitance\n\nEach of these capacitors will introduce a pole in the frequency response of the circuit. Therefore, the circuit has 4 poles.",
        "format": "markdown",
        "sha256": "48ae694885ac65f1344746760306e639466d73ad20dcec2db024ac0627526d86"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer identifies the common-source stage and its capacitors, but incorrectly counts one pole per capacitor. The circuit has two poles: CSB is shorted out, and only two capacitor voltages are independent.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 188,
        "total_tokens": 972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 188,
        "total_tokens": 972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source MOSFET amplifier with a voltage divider bias network. Let's analyze the circuit step by step.\n\n### Components:\n1. **MOSFET (M1)**: This is the main amplifying device.\n2. **Resistor \\( R_D \\)**: This resistor is connected to the drain of the MOSFET and \\( V_{DD} \\).\n3. **Resistors \\( R_1 \\) and \\( R_2 \\)**: These resistors form a voltage divider network to set the gate voltage \\( V_F \\).\n4. **\\( V_{DD} \\)**: The supply voltage.\n5. **\\( V_{in} \\)**: The input signal.\n6. **\\( V_{out} \\)**: The output signal.\n\n### Analysis:\n\n#### 1. **Voltage Divider Bias Network:**\nThe resistors \\( R_1 \\) and \\( R_2 \\) form a voltage divider to set the gate voltage \\( V_F \\). The voltage at the gate \\( V_F \\) is given by:\n\n\\[ V_F = V_{DD} \\left( \\frac{R_2}{R_1 + R_2} \\right) \\]\n\n#### 2. **MOSFET Operation:**\nThe MOSFET operates in different regions depending on the gate-source voltage \\( V_{GS} \\) and the drain-source voltage \\( V_{DS} \\).\n\n- **Cutoff Region:** If \\( V_{GS} < V_{th} \\) (threshold voltage), the MOSFET is off, and there is no current through \\( R_D \\).\n- **Triode Region:** If \\( V_{GS} > V_{th} \\) and \\( V_{DS} < V_{GS} - V_{th} \\), the MOSFET operates in the linear region.\n- **Saturation Region:** If \\( V_{GS} > V_{th} \\) and \\( V_{DS} \\geq V_{GS} - V_{th} \\), the MOSFET operates in the saturation region, which is typically used for amplification.\n\n#### 3. **Output Voltage \\( V_{out} \\):**\nThe output voltage \\( V_{out} \\) is taken from the drain of the MOSFET. The drain current \\( I_D \\) flows through \\( R_D \\), creating a voltage drop across \\( R_D \\). The output voltage is given by:\n\n\\[ V_{out} = V_{DD} - I_D R_D \\]\n\n#### 4. **Small-Signal Analysis:**\nFor small-signal analysis, we consider the variations around the operating point. The small-signal parameters include the transconductance \\( g_m \\) and the output resistance \\( r_o \\).\n\n- **Transconductance \\( g_m \\):** It is defined as the change in drain current per change in gate-source voltage.\n\n\\[ g_m = \\frac{\\partial I_D}{\\partial V_{GS}} \\]\n\n- **Output Resistance \\( r_o \\):** It is the resistance looking into the drain of the MOSFET.\n\n#### 5. **Voltage Gain:**\nThe voltage gain \\( A_v \\) of the amplifier is given by:\n\n\\[ A_v = -g_m R_D \\]\n\nThe negative sign indicates a phase inversion between the input and output signals.\n\n### Summary:\n- The gate voltage \\( V_F \\) is set by the voltage divider formed by \\( R_1 \\) and \\( R_2 \\).\n- The MOSFET operates in the saturation region for amplification.\n- The output voltage \\( V_{out} \\) is determined by the drain current \\( I_D \\) and the resistor \\( R_D \\).\n- The voltage gain \\( A_v \\) is determined by the transconductance \\( g_m \\) and the drain resistor \\( R_D \\).\n\nThis analysis provides a basic understanding of the operation and characteristics of the common-source MOSFET amplifier circuit shown in the figure.",
        "format": "markdown",
        "sha256": "03fc27b0a2f8f0e3164de5717b9570a9abbb6ea913b06b85b8f35ad5f73900ce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It treats the gate divider as fixed bias and analyzes a common-source amplifier, missing that the input is applied at the source and the output divider feeds back to the gate. Its inverting gain claim therefore misses the circuit’s negative-feedback, non-inverting behavior.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 826,
        "total_tokens": 1606,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 826,
        "total_tokens": 1606,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source MOSFET amplifier with a voltage divider bias network. Let's analyze the circuit step by step.\n\n### Components:\n1. **\\(M_1\\)**: NMOS transistor.\n2. **\\(R_D\\)**: Drain resistor.\n3. **\\(R_1\\)** and **\\(R_2\\)**: Resistors forming a voltage divider.\n4. **\\(V_{DD}\\)**: Supply voltage.\n5. **\\(V_{in}\\)**: Input voltage.\n6. **\\(V_{out}\\)**: Output voltage.\n\n### Analysis:\n\n#### 1. Voltage Divider Bias:\nThe resistors \\(R_1\\) and \\(R_2\\) form a voltage divider to set the gate voltage \\(V_F\\) of the NMOS transistor \\(M_1\\).\n\n\\[ V_F = V_{DD} \\left( \\frac{R_2}{R_1 + R_2} \\right) \\]\n\n#### 2. Gate Voltage (\\(V_G\\)):\nThe gate voltage \\(V_G\\) is equal to \\(V_F\\) because the gate is directly connected to the voltage divider.\n\n\\[ V_G = V_F \\]\n\n#### 3. Source Voltage (\\(V_S\\)):\nFor an NMOS transistor, the source is typically grounded, so:\n\n\\[ V_S = 0 \\]\n\n#### 4. Gate-Source Voltage (\\(V_{GS}\\)):\nThe gate-source voltage is:\n\n\\[ V_{GS} = V_G - V_S = V_F \\]\n\n#### 5. Drain Current (\\(I_D\\)):\nAssuming the transistor is in saturation mode, the drain current \\(I_D\\) can be expressed as:\n\n\\[ I_D = \\frac{1}{2} k' \\left( \\frac{W}{L} \\right) (V_{GS} - V_{th})^2 \\]\n\nwhere:\n- \\(k'\\) is the process transconductance parameter.\n- \\(\\frac{W}{L}\\) is the width-to-length ratio of the MOSFET.\n- \\(V_{th}\\) is the threshold voltage of the MOSFET.\n\n#### 6. Output Voltage (\\(V_{out}\\)):\nThe output voltage \\(V_{out}\\) is taken at the drain of the MOSFET. It can be calculated using Ohm's law:\n\n\\[ V_{out} = V_{DD} - I_D R_D \\]\n\n### Summary:\n- The gate voltage \\(V_G\\) is set by the voltage divider formed by \\(R_1\\) and \\(R_2\\).\n- The source voltage \\(V_S\\) is grounded.\n- The gate-source voltage \\(V_{GS}\\) is equal to \\(V_F\\).\n- The drain current \\(I_D\\) depends on \\(V_{GS}\\) and the MOSFET parameters.\n- The output voltage \\(V_{out}\\) is determined by the drain current \\(I_D\\) and the drain resistor \\(R_D\\).\n\nThis analysis provides a basic understanding of the operation of the common-source MOSFET amplifier circuit.",
        "format": "markdown",
        "sha256": "c36ec07940e210eb8c90f39103e5a3e1d2dfa2f9f9f70c1bb5790f74c979b86a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the NMOS and drain output, but misses the source-input topology and the output-to-gate negative-feedback path, instead treating the source as grounded and the divider as fixed bias.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 648,
        "total_tokens": 1428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 648,
        "total_tokens": 1428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a voltage divider bias network. Let's analyze the circuit step by step.\n\n### Components:\n1. **M1**: NMOS transistor\n2. **RD**: Drain resistor\n3. **R1 and R2**: Voltage divider resistors\n4. **VDD**: Supply voltage\n5. **Vin**: Input voltage\n6. **Vout**: Output voltage\n7. **VF**: Voltage at the gate of the NMOS transistor\n\n### Analysis:\n\n#### 1. Voltage Divider Bias:\nThe resistors \\( R1 \\) and \\( R2 \\) form a voltage divider to set the gate voltage \\( V_F \\) of the NMOS transistor \\( M1 \\).\n\n\\[ V_F = V_{DD} \\left( \\frac{R2}{R1 + R2} \\right) \\]\n\n#### 2. NMOS Transistor Operation:\nThe NMOS transistor \\( M1 \\) operates in different regions depending on the gate-source voltage \\( V_{GS} \\) and the drain-source voltage \\( V_{DS} \\).\n\n- **Cutoff Region**: \\( V_{GS} < V_{th} \\)\n- **Triode Region**: \\( V_{GS} > V_{th} \\) and \\( V_{DS} < V_{GS} - V_{th} \\)\n- **Saturation Region**: \\( V_{GS} > V_{th} \\) and \\( V_{DS} \\geq V_{GS} - V_{th} \\)\n\nWhere \\( V_{th} \\) is the threshold voltage of the NMOS transistor.\n\n#### 3. Output Voltage \\( V_{out} \\):\nThe output voltage \\( V_{out} \\) is taken from the drain of the NMOS transistor.\n\n\\[ V_{out} = V_{DD} - I_D \\cdot R_D \\]\n\nWhere \\( I_D \\) is the drain current of the NMOS transistor.\n\n#### 4. Drain Current \\( I_D \\):\nIn the saturation region, the drain current \\( I_D \\) is given by:\n\n\\[ I_D = \\frac{1}{2} k_n (V_{GS} - V_{th})^2 \\]\n\nWhere \\( k_n \\) is the process transconductance parameter.\n\n#### 5. Gate-Source Voltage \\( V_{GS} \\):\nThe gate-source voltage \\( V_{GS} \\) is:\n\n\\[ V_{GS} = V_F - V_{in} \\]\n\n### Summary:\n- The voltage divider formed by \\( R1 \\) and \\( R2 \\) sets the gate voltage \\( V_F \\).\n- The NMOS transistor \\( M1 \\) operates in different regions based on \\( V_{GS} \\) and \\( V_{DS} \\).\n- The output voltage \\( V_{out} \\) is determined by the drain current \\( I_D \\) and the drain resistor \\( R_D \\).\n\nTo fully analyze the circuit, you would need the values of \\( V_{DD} \\), \\( R1 \\), \\( R2 \\), \\( R_D \\), \\( V_{th} \\), and \\( k_n \\).",
        "format": "markdown",
        "sha256": "ff85cfee8bdcb60867f3529df68639653b4063a914c33c16ed132fcc72500bef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly writes the source-input relation VGS = VF − Vin, but treats R1–R2 as a fixed divider from VDD rather than feedback from Vout to the gate, and misses the negative-feedback action. This misses the circuit’s essential mechanism.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 667,
        "total_tokens": 1447,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 667,
        "total_tokens": 1447,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current source load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: This is the main transistor (typically an NMOS) that amplifies the input signal \\( V_{in} \\).\n2. **M2**: This is the current source transistor (typically a PMOS) that provides a constant current to the drain of M1.\n3. **\\( V_{DD} \\)**: The supply voltage.\n4. **\\( V_{in} \\)**: The input voltage signal.\n5. **\\( V_{out} \\)**: The output voltage signal.\n6. **\\( V_b \\)**: The bias voltage for M2.\n\n### Operation:\n1. **M1 (Common-Source Amplifier)**:\n   - The gate of M1 is connected to the input signal \\( V_{in} \\).\n   - The source of M1 is connected to ground.\n   - The drain of M1 is connected to the output \\( V_{out} \\) and to the drain of M2.\n\n2. **M2 (Current Source)**:\n   - The gate of M2 is connected to a bias voltage \\( V_b \\).\n   - The source of M2 is connected to \\( V_{DD} \\).\n   - The drain of M2 is connected to the drain of M1 and the output \\( V_{out} \\).\n\n### Analysis:\n1. **Biasing**:\n   - M2 is biased with \\( V_b \\) to operate in saturation mode, providing a constant current \\( I_{D2} \\).\n   - M1 is biased by the input signal \\( V_{in} \\).\n\n2. **Operation of M1**:\n   - When \\( V_{in} \\) increases, the gate-source voltage \\( V_{GS1} \\) of M1 increases, causing M1 to conduct more current.\n   - This increases the drain current \\( I_{D1} \\) of M1.\n   - Since \\( I_{D1} \\) is equal to \\( I_{D2} \\) (assuming ideal current source), the voltage drop across M1 increases, causing \\( V_{out} \\) to decrease.\n\n3. **Operation of M2**:\n   - M2 is designed to provide a constant current \\( I_{D2} \\) regardless of the voltage at its drain (as long as it is in saturation).\n   - The current \\( I_{D2} \\) sets the operating point for M1.\n\n### Output Voltage \\( V_{out} \\):\n- The output voltage \\( V_{out} \\) is determined by the drain current \\( I_{D1} \\) of M1 and the resistance seen at the drain of M1.\n- \\( V_{out} \\) can be expressed as:\n  \\[\n  V_{out} = V_{DD} - I_{D1} \\cdot R_{D}\n  \\]\n  where \\( R_{D} \\) is the equivalent resistance at the drain of M1.\n\n### Small-Signal Analysis:\n- For small-signal analysis, the transconductance \\( g_m \\) of M1 plays a crucial role.\n- The small-signal voltage gain \\( A_v \\) of the amplifier can be approximated as:\n  \\[\n  A_v = -g_m \\cdot R_{D}\n  \\]\n  where \\( g_m \\) is the transconductance of M1 and \\( R_{D} \\) is the output resistance of M2.\n\n### Summary:\n- The circuit is a common-source amplifier with a current source load.\n- M1 amplifies the input signal \\( V_{in} \\) and M2 provides a constant current load.\n- The output voltage \\( V_{out} \\) is inversely related to the input voltage \\( V_{in} \\).\n- The voltage gain is determined by the transconductance of M1 and the output resistance of M2.",
        "format": "markdown",
        "sha256": "d788d47355ecffe82e5a95cf28b782d133d2222ea286f38af15d1987b9f7ce2f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the source follower as a common-source amplifier with an active load and gives an inverting gain, contrary to the circuit topology.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 833,
        "total_tokens": 1613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 833,
        "total_tokens": 1613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with an active load. It consists of two MOSFETs, \\(M_1\\) and \\(M_2\\), where \\(M_1\\) is the main amplifying transistor and \\(M_2\\) is the active load transistor.\n\n### Components and Connections:\n1. **\\(M_1\\)**: \n   - **Gate**: Connected to \\(V_{in}\\), the input voltage.\n   - **Drain**: Connected to \\(V_{out}\\), the output voltage.\n   - **Source**: Connected to the drain of \\(M_2\\).\n\n2. **\\(M_2\\)**:\n   - **Gate**: Connected to \\(V_b\\), a bias voltage.\n   - **Drain**: Connected to the source of \\(M_1\\).\n   - **Source**: Connected to ground.\n\n3. **\\(V_{DD}\\)**: The supply voltage connected to the drain of \\(M_1\\).\n\n### Operation:\n- **\\(M_1\\)**: \n  - Acts as the main amplifying transistor.\n  - The input voltage \\(V_{in}\\) controls the gate-source voltage \\(V_{GS1}\\) of \\(M_1\\), which in turn controls the current through \\(M_1\\).\n\n- **\\(M_2\\)**:\n  - Acts as an active load.\n  - The bias voltage \\(V_b\\) sets the gate-source voltage \\(V_{GS2}\\) of \\(M_2\\), which controls the current through \\(M_2\\).\n\n### Analysis:\n1. **Biasing**:\n   - \\(V_b\\) sets the operating point of \\(M_2\\). \\(M_2\\) is typically in saturation mode to act as a constant current source.\n   - \\(V_{in}\\) sets the operating point of \\(M_1\\). \\(M_1\\) is also typically in saturation mode for amplification.\n\n2. **Output Voltage (\\(V_{out}\\))**:\n   - The output voltage \\(V_{out}\\) is taken from the drain of \\(M_1\\).\n   - As \\(V_{in}\\) increases, the gate-source voltage \\(V_{GS1}\\) of \\(M_1\\) increases, causing the drain current \\(I_{D1}\\) to increase.\n   - The increase in \\(I_{D1}\\) causes a voltage drop across \\(M_2\\), which affects \\(V_{out}\\).\n\n3. **Small-Signal Model**:\n   - For small signal analysis, the transconductance \\(g_m\\) of \\(M_1\\) and \\(M_2\\) are important parameters.\n   - The small signal output voltage \\(v_{out}\\) can be expressed as:\n     \\[\n     v_{out} = -g_{m1} \\cdot v_{in} \\cdot r_{out}\n     \\]\n     where \\(r_{out}\\) is the output resistance looking into the drain of \\(M_1\\).\n\n### Summary:\n- The circuit is a common-source amplifier with an active load.\n- \\(M_1\\) is the amplifying transistor controlled by \\(V_{in}\\).\n- \\(M_2\\) is the active load transistor controlled by \\(V_b\\).\n- The output voltage \\(V_{out}\\) is influenced by the input voltage \\(V_{in}\\) and the bias voltage \\(V_b\\).\n\nThis configuration provides high gain and is commonly used in analog integrated circuits for amplification purposes.",
        "format": "markdown",
        "sha256": "b97146bbb03efb5e47adb9f2657a8470bfeb10aee70647cc5a152bb5c4a2bb4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the circuit as a common-source amplifier, places the output at the wrong node, and gives an inverting gain. The circuit is a source follower with a positive gain at or slightly below unity.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 747,
        "total_tokens": 1527,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 747,
        "total_tokens": 1527,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current source load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: NMOS transistor with gate connected to \\( V_{in} \\), drain connected to \\( V_{DD} \\), and source connected to the drain of M2.\n2. **M2**: NMOS transistor with gate connected to \\( V_b \\), drain connected to the source of M1, and source connected to ground.\n\n### Operation:\n1. **M1 (Common-Source Amplifier)**:\n   - The gate of M1 is connected to the input voltage \\( V_{in} \\).\n   - The source of M1 is connected to the drain of M2.\n   - The drain of M1 is connected to \\( V_{DD} \\).\n   - M1 operates as a common-source amplifier, where the output voltage \\( V_{out} \\) is taken from the drain of M1.\n\n2. **M2 (Current Source Load)**:\n   - The gate of M2 is connected to a bias voltage \\( V_b \\).\n   - The source of M2 is connected to ground.\n   - M2 operates as a current source load for M1. The current through M2 is determined by the bias voltage \\( V_b \\).\n\n### Analysis:\n1. **Biasing**:\n   - The bias voltage \\( V_b \\) sets the current through M2. This current is mirrored through M1, setting the operating point of the amplifier.\n   - The current through M2 is \\( I_{D2} \\approx K_2 (V_b - V_{th2})^2 \\), where \\( K_2 \\) is the transconductance parameter of M2 and \\( V_{th2} \\) is the threshold voltage of M2.\n\n2. **Amplification**:\n   - The input voltage \\( V_{in} \\) modulates the gate-source voltage of M1, \\( V_{GS1} \\).\n   - The drain current of M1, \\( I_{D1} \\), is given by \\( I_{D1} \\approx K_1 (V_{GS1} - V_{th1})^2 \\), where \\( K_1 \\) is the transconductance parameter of M1 and \\( V_{th1} \\) is the threshold voltage of M1.\n   - The output voltage \\( V_{out} \\) is given by \\( V_{out} = V_{DD} - I_{D1} \\cdot R_{D} \\), where \\( R_{D} \\) is the equivalent resistance looking into the drain of M1.\n\n### Small-Signal Analysis:\n1. **Small-Signal Model**:\n   - For small variations in \\( V_{in} \\), the small-signal drain current \\( i_{d1} \\) of M1 is \\( i_{d1} = g_{m1} v_{gs1} \\), where \\( g_{m1} \\) is the transconductance of M1.\n   - The small-signal output voltage \\( v_{out} \\) is \\( v_{out} = -i_{d1} \\cdot r_{out} \\), where \\( r_{out} \\) is the output resistance of the amplifier.\n\n2. **Voltage Gain**:\n   - The voltage gain \\( A_v \\) of the amplifier is given by \\( A_v = \\frac{v_{out}}{v_{in}} = -g_{m1} \\cdot r_{out} \\).\n\n### Summary:\n- The circuit is a common-source amplifier with a current source load.\n- The bias voltage \\( V_b \\) sets the current through M2, which in turn sets the operating point of M1.\n- The input voltage \\( V_{in} \\) modulates the gate-source voltage of M1, resulting in amplification at the output \\( V_{out} \\).\n- The voltage gain of the amplifier is determined by the transconductance of M1 and the output resistance of the amplifier.",
        "format": "markdown",
        "sha256": "d157835aabf56d358c288f8b7f3c5c7c99387536ab477118b32634f09af854b2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the source follower as a common-source stage, places the output at M1’s drain rather than its source, and gives an inverting gain. The golden solution explicitly assigns this topology error a score of 0.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 853,
        "total_tokens": 1633,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 853,
        "total_tokens": 1633,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a CMOS inverter, which is a fundamental building block in digital electronics. It consists of two MOSFETs: an n-channel MOSFET (M1) and a p-channel MOSFET (M2). Here is the analysis of the circuit:\n\n### Components:\n1. **M1 (n-channel MOSFET)**:\n   - Source is connected to ground.\n   - Drain is connected to the output (V_out).\n   - Gate is connected to the input (V_in).\n\n2. **M2 (p-channel MOSFET)**:\n   - Source is connected to V_DD (positive supply voltage).\n   - Drain is connected to the output (V_out).\n   - Gate is connected to the input (V_in).\n\n### Operation:\nThe CMOS inverter operates in two distinct states depending on the input voltage (V_in):\n\n1. **When V_in is Low (0V or close to 0V)**:\n   - M1 (n-channel MOSFET) is off because the gate-source voltage (V_GS) is less than the threshold voltage (V_th).\n   - M2 (p-channel MOSFET) is on because the gate-source voltage (V_GS) is negative and less than the threshold voltage (V_th).\n   - Since M2 is on, it connects V_DD to the output (V_out), making V_out high (close to V_DD).\n\n2. **When V_in is High (V_DD or close to V_DD)**:\n   - M1 (n-channel MOSFET) is on because the gate-source voltage (V_GS) is greater than the threshold voltage (V_th).\n   - M2 (p-channel MOSFET) is off because the gate-source voltage (V_GS) is positive and greater than the threshold voltage (V_th).\n   - Since M1 is on, it connects the output (V_out) to ground, making V_out low (close to 0V).\n\n### Summary:\n- **V_in = 0V**: V_out = V_DD (High)\n- **V_in = V_DD**: V_out = 0V (Low)\n\n### Characteristics:\n- **High Noise Margin**: CMOS inverters have high noise margins, making them robust against noise.\n- **Low Power Consumption**: When the input is stable (either high or low), one of the transistors is off, resulting in very low static power consumption.\n- **High Speed**: CMOS inverters can switch states quickly, making them suitable for high-speed digital circuits.\n\n### Applications:\nCMOS inverters are widely used in digital logic circuits, including microprocessors, memory devices, and other digital systems. They are also used to create more complex logic gates and circuits by combining multiple inverters and other CMOS gates.",
        "format": "markdown",
        "sha256": "951c3b8dad5b4eef0b1c46cf30b391db56002feabf5529bb949a68c7869a3249"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up connections, and its input-output operation. The minor imprecision about the PMOS gate-source voltage at a high input does not contradict the circuit’s operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 440,
        "output_tokens": 585,
        "total_tokens": 1025,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 440,
        "output_tokens": 585,
        "total_tokens": 1025,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a CMOS inverter, which is a fundamental building block in digital electronics. It consists of two MOSFETs: an n-channel MOSFET (M1) and a p-channel MOSFET (M2).\n\n### Operation of the CMOS Inverter:\n\n1. **When \\( V_{in} \\) is Low (0V or close to 0V):**\n   - **M1 (n-channel MOSFET):** The gate-source voltage \\( V_{GS} \\) of M1 is low, so M1 is turned off.\n   - **M2 (p-channel MOSFET):** The gate-source voltage \\( V_{SG} \\) of M2 is high (since \\( V_{in} \\) is low), so M2 is turned on.\n   - **Output \\( V_{out} \\):** Since M2 is turned on, it connects \\( V_{DD} \\) to \\( V_{out} \\). Therefore, \\( V_{out} \\) is high (close to \\( V_{DD} \\)).\n\n2. **When \\( V_{in} \\) is High (close to \\( V_{DD} \\)):**\n   - **M1 (n-channel MOSFET):** The gate-source voltage \\( V_{GS} \\) of M1 is high, so M1 is turned on.\n   - **M2 (p-channel MOSFET):** The gate-source voltage \\( V_{SG} \\) of M2 is low (since \\( V_{in} \\) is high), so M2 is turned off.\n   - **Output \\( V_{out} \\):** Since M1 is turned on, it connects \\( V_{out} \\) to ground. Therefore, \\( V_{out} \\) is low (close to 0V).\n\n### Summary:\n- When \\( V_{in} \\) is low, \\( V_{out} \\) is high.\n- When \\( V_{in} \\) is high, \\( V_{out} \\) is low.\n\nThis behavior is characteristic of an inverter, which inverts the input signal. The CMOS inverter is widely used in digital circuits due to its high noise margins, low power consumption, and high speed.",
        "format": "markdown",
        "sha256": "eea491cb24a5951a929031482ed882537fabcd090ec2a5b3d3ec251cd79ff24f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter with an NMOS pull-down and PMOS pull-up, and accurately describes its inverting operation for low and high inputs.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 440,
        "output_tokens": 470,
        "total_tokens": 910,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 440,
        "output_tokens": 470,
        "total_tokens": 910,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a CMOS inverter, which is a fundamental building block in digital electronics. It consists of two MOSFETs: an n-channel MOSFET (M1) and a p-channel MOSFET (M2). Here is the analysis of the circuit:\n\n### Components:\n1. **M1 (n-channel MOSFET)**:\n   - Source is connected to ground.\n   - Drain is connected to the output (V_out).\n   - Gate is connected to the input (V_in).\n\n2. **M2 (p-channel MOSFET)**:\n   - Source is connected to V_DD (positive supply voltage).\n   - Drain is connected to the output (V_out).\n   - Gate is connected to the input (V_in).\n\n### Operation:\nThe CMOS inverter operates in two distinct states depending on the input voltage (V_in):\n\n1. **When V_in is Low (0V or close to 0V)**:\n   - M1 (n-channel MOSFET) is off because the gate-source voltage (V_GS) is less than the threshold voltage (V_th).\n   - M2 (p-channel MOSFET) is on because the gate-source voltage (V_GS) is negative and less than the threshold voltage (V_th).\n   - Since M2 is on, it connects V_DD to the output (V_out), making V_out high (close to V_DD).\n\n2. **When V_in is High (V_DD or close to V_DD)**:\n   - M1 (n-channel MOSFET) is on because the gate-source voltage (V_GS) is greater than the threshold voltage (V_th).\n   - M2 (p-channel MOSFET) is off because the gate-source voltage (V_GS) is positive and greater than the threshold voltage (V_th).\n   - Since M1 is on, it connects the output (V_out) to ground, making V_out low (close to 0V).\n\n### Summary:\n- **V_in = 0V**: V_out = V_DD (High)\n- **V_in = V_DD**: V_out = 0V (Low)\n\nThis behavior makes the CMOS inverter a digital logic gate that inverts the input signal. If the input is high, the output is low, and if the input is low, the output is high.",
        "format": "markdown",
        "sha256": "72e5d708e200883967c3722c2a397586a6d4d9d19040f5a95be69adeac9ac45d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up connections, and its inverting operation at both logic levels.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 440,
        "output_tokens": 495,
        "total_tokens": 935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 440,
        "output_tokens": 495,
        "total_tokens": 935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a CMOS inverter, which is a fundamental building block in digital electronics. It consists of two MOSFETs: an n-channel MOSFET (M2) and a p-channel MOSFET (M1).\n\n### Operation:\n\n1. **When \\( V_{in} \\) is Low (0V):**\n   - M1 (p-channel MOSFET) is turned on because the gate-source voltage is negative (assuming \\( V_{DD} \\) is positive).\n   - M2 (n-channel MOSFET) is turned off because the gate-source voltage is zero or negative.\n   - Since M1 is on, it connects \\( V_{DD} \\) to \\( V_{out} \\), making \\( V_{out} \\) high (close to \\( V_{DD} \\)).\n\n2. **When \\( V_{in} \\) is High (\\( V_{DD} \\)):**\n   - M1 (p-channel MOSFET) is turned off because the gate-source voltage is zero or positive.\n   - M2 (n-channel MOSFET) is turned on because the gate-source voltage is positive.\n   - Since M2 is on, it connects \\( V_{out} \\) to ground, making \\( V_{out} \\) low (close to 0V).\n\n### Summary:\n- **Low \\( V_{in} \\)** results in **High \\( V_{out} \\)**.\n- **High \\( V_{in} \\)** results in **Low \\( V_{out} \\)**.\n\nThis behavior is why the circuit is called an inverter; it inverts the input signal. The CMOS inverter is widely used in digital circuits due to its high noise margins, low power consumption, and high speed.",
        "format": "markdown",
        "sha256": "5f935dd8bbdeba49c1928d7152f33f7d1458f505ad531c56218816c9a3191dee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as p-channel and analyzes the circuit as an ordinary CMOS inverter. Both devices are NMOS, so the required topology identification is incorrect.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 440,
        "output_tokens": 367,
        "total_tokens": 807,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 440,
        "output_tokens": 367,
        "total_tokens": 807,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a CMOS inverter, which is a fundamental building block in digital electronics. It consists of two MOSFETs: an n-channel MOSFET (M2) and a p-channel MOSFET (M1).\n\n### Operation:\n\n1. **When \\( V_{in} \\) is Low (0V):**\n   - M1 (p-channel MOSFET) is turned on because the gate-source voltage is negative.\n   - M2 (n-channel MOSFET) is turned off because the gate-source voltage is zero.\n   - Since M1 is on, it connects \\( V_{DD} \\) to \\( V_{out} \\), making \\( V_{out} \\) high (logic 1).\n\n2. **When \\( V_{in} \\) is High (\\( V_{DD} \\)):**\n   - M1 (p-channel MOSFET) is turned off because the gate-source voltage is zero.\n   - M2 (n-channel MOSFET) is turned on because the gate-source voltage is positive.\n   - Since M2 is on, it connects \\( V_{out} \\) to ground, making \\( V_{out} \\) low (logic 0).\n\n### Summary:\n- The CMOS inverter inverts the input signal.\n- When \\( V_{in} \\) is low, \\( V_{out} \\) is high.\n- When \\( V_{in} \\) is high, \\( V_{out} \\) is low.\n\n### Characteristics:\n- **High Noise Margin:** CMOS inverters have high noise margins, making them robust against noise.\n- **Low Power Consumption:** CMOS technology consumes power only during switching, making it energy-efficient.\n- **High Speed:** CMOS inverters can operate at high speeds, suitable for high-frequency applications.\n\n### Applications:\n- Used in digital logic circuits.\n- Fundamental component in microprocessors, memory devices, and other digital systems.\n\nThis analysis covers the basic operation and characteristics of the CMOS inverter circuit shown in the figure.",
        "format": "markdown",
        "sha256": "12c97bc30990d452b407bd99805b8fef6a53ca73367870af6c640a139d6b88c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as a p-channel device and analyzes the circuit as a conventional CMOS inverter; both devices are NMOS, so the golden solution requires a score of 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 440,
        "output_tokens": 417,
        "total_tokens": 857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 440,
        "output_tokens": 417,
        "total_tokens": 857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a CMOS inverter, which is a fundamental building block in digital electronics. It consists of two MOSFETs: an n-channel MOSFET (M2) and a p-channel MOSFET (M1).\n\n### Operation:\n\n1. **When \\( V_{in} \\) is Low (0V):**\n   - M1 (p-channel MOSFET) is turned on because the gate-source voltage is negative (assuming \\( V_{DD} \\) is positive).\n   - M2 (n-channel MOSFET) is turned off because the gate-source voltage is zero.\n   - The output \\( V_{out} \\) is pulled up to \\( V_{DD} \\) through M1.\n\n2. **When \\( V_{in} \\) is High ( \\( V_{DD} \\) ):**\n   - M1 (p-channel MOSFET) is turned off because the gate-source voltage is zero.\n   - M2 (n-channel MOSFET) is turned on because the gate-source voltage is positive.\n   - The output \\( V_{out} \\) is pulled down to ground through M2.\n\n### Summary:\n- The CMOS inverter inverts the input signal.\n- When \\( V_{in} \\) is low, \\( V_{out} \\) is high.\n- When \\( V_{in} \\) is high, \\( V_{out} \\) is low.\n\n### Characteristics:\n- **High Noise Margin:** CMOS inverters have high noise margins, making them robust against noise.\n- **Low Power Consumption:** When the input is stable (either high or low), one of the transistors is off, resulting in very low static power consumption.\n- **High Speed:** CMOS inverters can switch states quickly, making them suitable for high-speed digital circuits.\n\n### Applications:\n- Used in digital logic circuits.\n- Fundamental building block for more complex digital components like flip-flops, multiplexers, and microprocessors.",
        "format": "markdown",
        "sha256": "8db455ad3eb6f48e5c1564d00f9e8bb5deb11a5cd47807df0342b1251eb291e6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as a PMOS and analyzes the circuit as an ordinary CMOS inverter. Both devices are NMOS, so this violates the golden solution’s non-negotiable scoring rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 440,
        "output_tokens": 406,
        "total_tokens": 846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 440,
        "output_tokens": 406,
        "total_tokens": 846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a basic CMOS inverter, which is a fundamental building block in digital electronics. It consists of two MOSFETs: an n-channel MOSFET (M1) and a p-channel MOSFET (M2).\n\n### Operation:\n\n1. **When \\( V_{in} \\) is Low (0V):**\n   - M1 (n-channel MOSFET) is off because the gate-source voltage is below the threshold voltage.\n   - M2 (p-channel MOSFET) is on because the gate-source voltage is negative (since \\( V_{DD} \\) is positive and \\( V_{in} \\) is 0V).\n   - The output \\( V_{out} \\) is pulled up to \\( V_{DD} \\) through M2.\n\n2. **When \\( V_{in} \\) is High (\\( V_{DD} \\)):**\n   - M1 (n-channel MOSFET) is on because the gate-source voltage is above the threshold voltage.\n   - M2 (p-channel MOSFET) is off because the gate-source voltage is zero (since \\( V_{DD} \\) is positive and \\( V_{in} \\) is \\( V_{DD} \\)).\n   - The output \\( V_{out} \\) is pulled down to ground through M1.\n\n### Summary:\n\n- **Low \\( V_{in} \\) (0V):** \\( V_{out} \\) is High (\\( V_{DD} \\)).\n- **High \\( V_{in} \\) (\\( V_{DD} \\)):** \\( V_{out} \\) is Low (0V).\n\nThis inverter circuit effectively flips the input signal, producing the opposite logic level at the output.",
        "format": "markdown",
        "sha256": "c50c3976267672416302198d64a38a003b376bca5ee11faafd19be32fa3df5fb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a CMOS inverter: M2 is diode-connected, not driven by Vin. Although it recognizes the NMOS/PMOS devices and an inverting output, it misses the actual topology and its gain behavior.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 365,
        "total_tokens": 1145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 365,
        "total_tokens": 1145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a basic CMOS inverter, which is a fundamental building block in digital electronics. It consists of two MOSFETs: an n-channel MOSFET (M1) and a p-channel MOSFET (M2).\n\n### Operation:\n\n1. **When \\( V_{in} \\) is Low (0V):**\n   - M1 (n-channel MOSFET) is off because the gate-source voltage is below the threshold voltage.\n   - M2 (p-channel MOSFET) is on because the gate-source voltage is negative (since \\( V_{DD} \\) is positive and \\( V_{in} \\) is 0V).\n   - The output \\( V_{out} \\) is pulled up to \\( V_{DD} \\) through M2.\n\n2. **When \\( V_{in} \\) is High (\\( V_{DD} \\)):**\n   - M1 (n-channel MOSFET) is on because the gate-source voltage is above the threshold voltage.\n   - M2 (p-channel MOSFET) is off because the gate-source voltage is zero (since \\( V_{DD} \\) is positive and \\( V_{in} \\) is \\( V_{DD} \\)).\n   - The output \\( V_{out} \\) is pulled down to ground through M1.\n\n### Summary:\n\n- **Low \\( V_{in} \\)** results in **High \\( V_{out} \\)**.\n- **High \\( V_{in} \\)** results in **Low \\( V_{out} \\)**.\n\nThis behavior is characteristic of an inverter, which inverts the input signal. The CMOS inverter is widely used in digital circuits due to its low power consumption and high noise immunity.",
        "format": "markdown",
        "sha256": "01ded86f0196ff4313cea335f6a5369ba211742bd22f038fadc0af03a73a35f9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It misidentifies the diode-connected PMOS load as a CMOS inverter, incorrectly treating M2's gate as driven by Vin. The device types and inverting behavior are relevant, but the topology and analysis are wrong.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 362,
        "total_tokens": 1142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 362,
        "total_tokens": 1142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a basic CMOS inverter, which is a fundamental building block in digital electronics. It consists of two MOSFETs: an n-channel MOSFET (M1) and a p-channel MOSFET (M2).\n\n### Components:\n1. **M1 (n-channel MOSFET)**:\n   - Source is connected to ground.\n   - Gate is connected to the input voltage (\\(V_{in}\\)).\n   - Drain is connected to the output node (\\(V_{out}\\)).\n\n2. **M2 (p-channel MOSFET)**:\n   - Source is connected to the supply voltage (\\(V_{DD}\\)).\n   - Gate is connected to the input voltage (\\(V_{in}\\)).\n   - Drain is connected to the output node (\\(V_{out}\\)).\n\n### Operation:\nThe operation of the CMOS inverter can be understood by analyzing the behavior of the MOSFETs based on the input voltage (\\(V_{in}\\)):\n\n1. **When \\(V_{in}\\) is low (0V or close to 0V)**:\n   - M1 (n-channel MOSFET) is off because the gate-source voltage (\\(V_{GS}\\)) is less than the threshold voltage (\\(V_{th}\\)).\n   - M2 (p-channel MOSFET) is on because the gate-source voltage (\\(V_{SG}\\)) is greater than the threshold voltage (\\(V_{th}\\)).\n   - Since M2 is on, it connects \\(V_{DD}\\) to \\(V_{out}\\), making \\(V_{out}\\) high (close to \\(V_{DD}\\)).\n\n2. **When \\(V_{in}\\) is high (\\(V_{DD}\\) or close to \\(V_{DD}\\))**:\n   - M1 (n-channel MOSFET) is on because the gate-source voltage (\\(V_{GS}\\)) is greater than the threshold voltage (\\(V_{th}\\)).\n   - M2 (p-channel MOSFET) is off because the gate-source voltage (\\(V_{SG}\\)) is less than the threshold voltage (\\(V_{th}\\)).\n   - Since M1 is on, it connects ground to \\(V_{out}\\), making \\(V_{out}\\) low (close to 0V).\n\n### Summary:\n- **Input \\(V_{in}\\) = 0V**: Output \\(V_{out}\\) = \\(V_{DD}\\)\n- **Input \\(V_{in}\\) = \\(V_{DD}\\)**: Output \\(V_{out}\\) = 0V\n\nThis behavior demonstrates the inverting property of the CMOS inverter, where a low input results in a high output and a high input results in a low output.",
        "format": "markdown",
        "sha256": "26a2a4251d5932e97f3d186d8e5a0f3f2e377669cb09fd30dcb5d9438060902b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly identifies the NMOS and PMOS types and some terminal connections, but it incorrectly connects M2’s gate to Vin and treats the circuit as a CMOS inverter. In the actual circuit M2 is diode-connected, with its gate tied to Vout, so the analysis misses the essential topology and gain.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 577,
        "total_tokens": 1357,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 577,
        "total_tokens": 1357,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a CMOS inverter, which is a fundamental building block in digital electronics. It consists of two MOSFETs: an n-channel MOSFET (M1) and a p-channel MOSFET (M2).\n\n### Operation:\n\n1. **When \\( V_{in} \\) is Low (0V):**\n   - M1 (n-channel MOSFET) is off because the gate-source voltage is below the threshold voltage.\n   - M2 (p-channel MOSFET) is on because the gate-source voltage is negative enough to turn it on.\n   - Since M2 is on, it connects \\( V_{DD} \\) to \\( V_{out} \\), making \\( V_{out} \\) high (close to \\( V_{DD} \\)).\n\n2. **When \\( V_{in} \\) is High ( \\( V_{DD} \\)):**\n   - M1 (n-channel MOSFET) is on because the gate-source voltage is above the threshold voltage.\n   - M2 (p-channel MOSFET) is off because the gate-source voltage is not negative enough to turn it on.\n   - Since M1 is on, it connects \\( V_{out} \\) to ground, making \\( V_{out} \\) low (0V).\n\n### Summary:\n\n- **Low \\( V_{in} \\)** results in **High \\( V_{out} \\)**.\n- **High \\( V_{in} \\)** results in **Low \\( V_{out} \\)**.\n\nThis behavior is characteristic of an inverter, which inverts the input signal. The CMOS inverter is widely used in digital circuits due to its low power consumption and high noise margins.",
        "format": "markdown",
        "sha256": "7fe67fb3cb833efc6677a6d08fdfd77c96bb87365d86818e099df8f1c06a6364"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the circuit as a CMOS inverter with an NMOS pull-down. Both devices are PMOS; M1 is a diode-connected PMOS load, and the circuit is a gm/gm amplifier.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 355,
        "total_tokens": 1135,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 355,
        "total_tokens": 1135,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a CMOS inverter, which is a fundamental building block in digital electronics. It consists of two MOSFETs: an n-channel MOSFET (M1) and a p-channel MOSFET (M2).\n\n### Components:\n1. **M1 (n-channel MOSFET)**:\n   - Source connected to ground.\n   - Drain connected to the output (Vout).\n   - Gate connected to the input (Vin).\n\n2. **M2 (p-channel MOSFET)**:\n   - Source connected to the supply voltage (VDD).\n   - Drain connected to the output (Vout).\n   - Gate connected to the input (Vin).\n\n### Operation:\n- **When Vin is low (0V)**:\n  - M1 (n-channel MOSFET) is off because the gate-source voltage is below the threshold voltage.\n  - M2 (p-channel MOSFET) is on because the gate-source voltage is negative (VDD - 0V).\n  - The output (Vout) is pulled up to VDD.\n\n- **When Vin is high (VDD)**:\n  - M1 (n-channel MOSFET) is on because the gate-source voltage is above the threshold voltage.\n  - M2 (p-channel MOSFET) is off because the gate-source voltage is zero (VDD - VDD).\n  - The output (Vout) is pulled down to ground.\n\n### Summary:\n- **Vin = 0V**: Vout = VDD (logic high)\n- **Vin = VDD**: Vout = 0V (logic low)\n\nThis behavior makes the CMOS inverter a digital logic gate that inverts the input signal.",
        "format": "markdown",
        "sha256": "62d5c4cfaa80179bf1463adddf95c71f925dfcbd1dab0c6b590547093882b217"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the circuit as a CMOS inverter with an NMOS pull-down. Both devices are PMOS; M1 is a diode-connected PMOS load, and the key behavior is the gm/gm amplifier gain, not inverter switching.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 354,
        "total_tokens": 1134,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 354,
        "total_tokens": 1134,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a CMOS inverter, which is a fundamental building block in digital electronics. It consists of two MOSFETs: an n-channel MOSFET (M1) and a p-channel MOSFET (M2).\n\n### Components:\n1. **M1 (n-channel MOSFET)**:\n   - Source connected to ground.\n   - Drain connected to the output (Vout).\n   - Gate connected to the input (Vin).\n\n2. **M2 (p-channel MOSFET)**:\n   - Source connected to the supply voltage (VDD).\n   - Drain connected to the output (Vout).\n   - Gate connected to the input (Vin).\n\n### Operation:\nThe CMOS inverter operates as follows:\n\n1. **When Vin is low (0V)**:\n   - M1 (n-channel MOSFET) is off because the gate-source voltage is below the threshold voltage.\n   - M2 (p-channel MOSFET) is on because the gate-source voltage is negative (VDD - 0V).\n   - The output (Vout) is pulled up to VDD through M2.\n\n2. **When Vin is high (VDD)**:\n   - M1 (n-channel MOSFET) is on because the gate-source voltage is above the threshold voltage.\n   - M2 (p-channel MOSFET) is off because the gate-source voltage is zero (VDD - VDD).\n   - The output (Vout) is pulled down to ground through M1.\n\n### Summary:\n- **Vin = 0V**: Vout = VDD (logic high)\n- **Vin = VDD**: Vout = 0V (logic low)\n\nThis behavior makes the CMOS inverter a digital logic gate that inverts the input signal. It is widely used in digital circuits for implementing logic functions.",
        "format": "markdown",
        "sha256": "36b4fedeb5a4d35df242888b62497f472705549d2ce8d199b342d8d8adbc1f80"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a CMOS inverter with an NMOS and a PMOS. Both devices are PMOS: M2 is the common-source input device, and M1 is a diode-connected PMOS load, so the inverter analysis does not apply.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 381,
        "total_tokens": 1161,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 381,
        "total_tokens": 1161,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance \\( R_{out} \\) in the given circuit, we need to analyze the small-signal model of the circuit. The circuit consists of two MOSFETs, \\( M_1 \\) and \\( M_2 \\), connected in a cascode configuration.\n\n### Small-Signal Model Analysis\n\n1. **Small-Signal Parameters:**\n   - \\( r_{o1} \\): Output resistance of \\( M_1 \\)\n   - \\( r_{o2} \\): Output resistance of \\( M_2 \\)\n   - \\( g_{m1} \\): Transconductance of \\( M_1 \\)\n   - \\( g_{m2} \\): Transconductance of \\( M_2 \\)\n\n2. **Output Resistance Calculation:**\n   - The output resistance \\( R_{out} \\) seen looking into the drain of \\( M_2 \\) is influenced by both \\( M_1 \\) and \\( M_2 \\).\n\n### Steps to Calculate \\( R_{out} \\):\n\n1. **Resistance Looking into the Drain of \\( M_1 \\):**\n   - The resistance looking into the drain of \\( M_1 \\) (node X) is given by:\n     \\[\n     r_{o1} \\parallel \\left( \\frac{1}{g_{m1}} + r_{o2} \\right)\n     \\]\n   - Since \\( M_2 \\) is in the cascode configuration, the small-signal resistance looking into the source of \\( M_2 \\) is approximately \\( \\frac{1}{g_{m2}} \\).\n\n2. **Effective Resistance at Node X:**\n   - The effective resistance at node X is:\n     \\[\n     R_X = r_{o1} \\parallel \\left( \\frac{1}{g_{m1}} + r_{o2} \\right)\n     \\]\n\n3. **Output Resistance \\( R_{out} \\):**\n   - The output resistance \\( R_{out} \\) seen looking into the drain of \\( M_2 \\) is:\n     \\[\n     R_{out} = r_{o2} \\left( 1 + g_{m2} R_X \\right)\n     \\]\n   - Substituting \\( R_X \\):\n     \\[\n     R_{out} = r_{o2} \\left( 1 + g_{m2} \\left( r_{o1} \\parallel \\left( \\frac{1}{g_{m1}} + r_{o2} \\right) \\right) \\right)\n     \\]\n\n### Simplified Expression:\nFor high gain transistors, \\( g_{m1} r_{o1} \\gg 1 \\) and \\( g_{m2} r_{o2} \\gg 1 \\), the parallel combination can be approximated as \\( r_{o1} \\parallel r_{o2} \\approx r_{o1} \\).\n\nThus, the output resistance simplifies to:\n\\[\nR_{out} \\approx r_{o2} \\left( 1 + g_{m2} r_{o1} \\right)\n\\]\n\n### Conclusion:\nThe output resistance \\( R_{out} \\) of the cascode configuration is significantly increased compared to the individual output resistances of \\( M_1 \\) and \\( M_2 \\) due to the multiplication factor \\( g_{m2} r_{o1} \\). This high output resistance is one of the key advantages of the cascode configuration in analog circuit design.",
        "format": "markdown",
        "sha256": "14cfe48b9cd9553a024796b5c89facbc80431a668c18f71ab30357e51fcbeae7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer assigns the cascode role and output port to M2 and uses gm2 as the cascode factor. In the figure, M1 is the PMOS cascode device, so the result should be dominated by gm1 ro1 ro2.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 778,
        "output_tokens": 741,
        "total_tokens": 1519,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 778,
        "output_tokens": 741,
        "total_tokens": 1519,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance \\( R_{out} \\) in the given circuit, we need to analyze the small-signal model of the circuit. The circuit consists of two MOSFETs, \\( M_1 \\) and \\( M_2 \\), connected in a cascode configuration.\n\n1. **Small-Signal Model:**\n   - \\( M_1 \\) is the common-source transistor.\n   - \\( M_2 \\) is the common-gate transistor.\n\n2. **Small-Signal Parameters:**\n   - \\( r_{o1} \\): Output resistance of \\( M_1 \\).\n   - \\( r_{o2} \\): Output resistance of \\( M_2 \\).\n   - \\( g_{m1} \\): Transconductance of \\( M_1 \\).\n   - \\( g_{m2} \\): Transconductance of \\( M_2 \\).\n\n3. **Output Resistance Calculation:**\n   - The output resistance looking into the drain of \\( M_1 \\) is \\( r_{o1} \\).\n   - The output resistance looking into the drain of \\( M_2 \\) is \\( r_{o2} \\).\n\n   The small-signal output resistance \\( R_{out} \\) of the cascode configuration can be found using the following formula:\n\n   \\[\n   R_{out} = r_{o2} + (1 + g_{m2} r_{o2}) r_{o1}\n   \\]\n\n   This formula accounts for the fact that the output resistance of \\( M_1 \\) is multiplied by the gain of \\( M_2 \\).\n\nTherefore, the output resistance \\( R_{out} \\) of the given circuit is:\n\n\\[\nR_{out} = r_{o2} + (1 + g_{m2} r_{o2}) r_{o1}\n\\]\n\nThis high output resistance is one of the key advantages of the cascode configuration, making it useful in applications requiring high gain and high output impedance.",
        "format": "markdown",
        "sha256": "17bbddb09dba465ef3d33182f076decd4a522b61b05f67d984bf638a9e8bd7d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer assigns the cascode role to M2 and uses gm2, but M1 is the cascode device; the output-resistance expression therefore has the wrong transconductance factor.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 778,
        "output_tokens": 416,
        "total_tokens": 1194,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 778,
        "output_tokens": 416,
        "total_tokens": 1194,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance \\( R_{out} \\) in the given circuit, we need to analyze the small-signal model of the circuit. The circuit consists of two MOSFETs, \\( M_1 \\) and \\( M_2 \\), connected in a cascode configuration.\n\n1. **Small-Signal Model:**\n   - \\( M_1 \\) is the common-source transistor.\n   - \\( M_2 \\) is the common-gate transistor.\n\n2. **Small-Signal Parameters:**\n   - \\( r_{o1} \\): Output resistance of \\( M_1 \\).\n   - \\( r_{o2} \\): Output resistance of \\( M_2 \\).\n   - \\( g_{m1} \\): Transconductance of \\( M_1 \\).\n   - \\( g_{m2} \\): Transconductance of \\( M_2 \\).\n\n3. **Output Resistance Calculation:**\n   - The output resistance looking into the drain of \\( M_1 \\) is \\( r_{o1} \\).\n   - The output resistance looking into the drain of \\( M_2 \\) is \\( r_{o2} \\).\n\n   The small-signal output resistance \\( R_{out} \\) of the cascode configuration can be found using the following formula:\n\n   \\[\n   R_{out} = r_{o2} + (1 + g_{m2} r_{o2}) r_{o1}\n   \\]\n\n   This formula accounts for the fact that the output resistance of \\( M_1 \\) is multiplied by the gain of \\( M_2 \\).\n\nTherefore, the output resistance \\( R_{out} \\) of the given circuit is:\n\n\\[\nR_{out} = r_{o2} + (1 + g_{m2} r_{o2}) r_{o1}\n\\]\n\nThis high output resistance is one of the key advantages of the cascode configuration, making it useful in applications requiring high gain and high output impedance.",
        "format": "markdown",
        "sha256": "17bbddb09dba465ef3d33182f076decd4a522b61b05f67d984bf638a9e8bd7d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer assigns the cascode role to M2 and uses gm2, but M1 is the cascode device; the output-resistance expression therefore has the wrong transconductance factor.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 778,
        "output_tokens": 416,
        "total_tokens": 1194,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 778,
        "output_tokens": 416,
        "total_tokens": 1194,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that the transistor M2 is in saturation in the given circuit, we need to satisfy the condition for saturation in a MOSFET. For an NMOS transistor, the saturation condition is:\n\n\\[ V_{DS} \\geq V_{GS} - V_{th} \\]\n\nwhere:\n- \\( V_{DS} \\) is the drain-source voltage.\n- \\( V_{GS} \\) is the gate-source voltage.\n- \\( V_{th} \\) is the threshold voltage of the transistor.\n\nIn the given circuit:\n- \\( V_{GS2} = V_{b2} - V_X \\)\n- \\( V_{DS2} = V_{DD} - V_X \\)\n\nTo ensure M2 is in saturation, we need:\n\n\\[ V_{DD} - V_X \\geq V_{b2} - V_X - V_{th2} \\]\n\nSimplifying this, we get:\n\n\\[ V_{DD} \\geq V_{b2} - V_{th2} \\]\n\nTherefore, to ensure M2 is in saturation, the voltage \\( V_{DD} \\) must be greater than or equal to \\( V_{b2} - V_{th2} \\). This means that the supply voltage \\( V_{DD} \\) should be sufficiently high compared to the gate voltage \\( V_{b2} \\) minus the threshold voltage \\( V_{th2} \\) of M2.",
        "format": "markdown",
        "sha256": "e6c22d4cde381e5ada4a498be60bf9a7a3131a00a2ca8afbf42488a0c676ce3a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer treats M2 as NMOS, but both devices are PMOS. Its terminal-voltage assignments and resulting supply-only condition are therefore wrong and miss the key fact that VX is set by Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 786,
        "output_tokens": 297,
        "total_tokens": 1083,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 786,
        "output_tokens": 297,
        "total_tokens": 1083,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that the transistor M2 is in saturation in the given circuit, we need to satisfy the condition for saturation in a MOSFET. For an NMOS transistor, the saturation condition is:\n\n\\[ V_{DS} \\geq V_{GS} - V_{th} \\]\n\nwhere:\n- \\( V_{DS} \\) is the drain-source voltage.\n- \\( V_{GS} \\) is the gate-source voltage.\n- \\( V_{th} \\) is the threshold voltage of the transistor.\n\nIn the given circuit:\n- \\( V_{GS2} = V_{b2} - V_X \\)\n- \\( V_{DS2} = V_{DD} - V_X \\)\n\nTo ensure M2 is in saturation, we need:\n\n\\[ V_{DD} - V_X \\geq V_{b2} - V_X - V_{th2} \\]\n\nSimplifying this, we get:\n\n\\[ V_{DD} \\geq V_{b2} - V_{th2} \\]\n\nTherefore, to ensure M2 is in saturation, the following condition must be met:\n\n\\[ V_{DD} \\geq V_{b2} - V_{th2} \\]\n\nThis means that the supply voltage \\( V_{DD} \\) must be greater than or equal to the gate voltage \\( V_{b2} \\) minus the threshold voltage \\( V_{th2} \\) of the transistor M2.",
        "format": "markdown",
        "sha256": "4cf8b7710a625cf72db8cac710149ea9bb9f966894a50e501c6f518f06b600a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer treats M2 as an NMOS and misidentifies its terminal voltages. Its resulting supply-only condition misses the PMOS saturation condition and the key fact that VX is set by Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 786,
        "output_tokens": 298,
        "total_tokens": 1084,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 786,
        "output_tokens": 298,
        "total_tokens": 1084,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that the transistor M2 is in saturation in the given circuit, we need to satisfy the condition for saturation in a MOSFET. For an NMOS transistor, the saturation condition is:\n\n\\[ V_{DS} \\geq V_{GS} - V_{th} \\]\n\nwhere:\n- \\( V_{DS} \\) is the drain-source voltage.\n- \\( V_{GS} \\) is the gate-source voltage.\n- \\( V_{th} \\) is the threshold voltage of the transistor.\n\nIn the given circuit:\n- \\( V_{GS2} = V_{b2} - V_X \\)\n- \\( V_{DS2} = V_{DD} - V_X \\)\n\nTo ensure M2 is in saturation, we need:\n\n\\[ V_{DD} - V_X \\geq V_{b2} - V_X - V_{th2} \\]\n\nSimplifying this, we get:\n\n\\[ V_{DD} \\geq V_{b2} - V_{th2} \\]\n\nTherefore, to ensure M2 is in saturation, the following condition must be met:\n\n\\[ V_{DD} \\geq V_{b2} - V_{th2} \\]\n\nThis means that the supply voltage \\( V_{DD} \\) must be greater than or equal to the gate voltage \\( V_{b2} \\) minus the threshold voltage \\( V_{th2} \\) of the transistor M2.",
        "format": "markdown",
        "sha256": "4cf8b7710a625cf72db8cac710149ea9bb9f966894a50e501c6f518f06b600a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer treats M2 as an NMOS and misidentifies its terminal voltages. Its resulting supply-only condition misses the PMOS saturation condition and the key fact that VX is set by Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 786,
        "output_tokens": 298,
        "total_tokens": 1084,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 786,
        "output_tokens": 298,
        "total_tokens": 1084,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current source load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: NMOS transistor with gate connected to \\( V_{in} \\), source connected to ground, and drain connected to node \\( X \\).\n2. **M2**: NMOS transistor with gate connected to \\( V_{b1} \\), source connected to node \\( X \\), and drain connected to \\( V_{out} \\).\n3. **Current Source \\( I_1 \\)**: Connected between \\( V_{DD} \\) and \\( V_{out} \\).\n\n### Operation:\n1. **M1 (Common-Source Amplifier)**:\n   - The gate of M1 is driven by the input voltage \\( V_{in} \\).\n   - The source of M1 is grounded.\n   - The drain of M1 is connected to node \\( X \\).\n\n2. **M2 (Current Source Load)**:\n   - The gate of M2 is biased with a constant voltage \\( V_{b1} \\).\n   - The source of M2 is connected to node \\( X \\).\n   - The drain of M2 is connected to \\( V_{out} \\).\n\n3. **Current Source \\( I_1 \\)**:\n   - Provides a constant current \\( I_1 \\) from \\( V_{DD} \\) to \\( V_{out} \\).\n\n### Analysis:\n1. **DC Biasing**:\n   - The gate of M2 is biased with \\( V_{b1} \\), which sets the operating point of M2.\n   - The current source \\( I_1 \\) ensures a constant current through M2.\n\n2. **Small-Signal Analysis**:\n   - The small-signal input \\( v_{in} \\) modulates the gate voltage of M1.\n   - The small-signal drain current of M1 (\\( i_{d1} \\)) is given by \\( i_{d1} = g_{m1} v_{in} \\), where \\( g_{m1} \\) is the transconductance of M1.\n   - The small-signal voltage at node \\( X \\) (\\( v_X \\)) is influenced by the small-signal drain current of M1 and the impedance looking into the drain of M2.\n\n3. **Output Voltage \\( V_{out} \\)**:\n   - The small-signal output voltage \\( v_{out} \\) is influenced by the small-signal voltage at node \\( X \\) and the impedance of the current source \\( I_1 \\).\n   - Assuming the current source \\( I_1 \\) has a high output impedance, the small-signal voltage gain \\( A_v \\) of the amplifier can be approximated as:\n     \\[\n     A_v = \\frac{v_{out}}{v_{in}} \\approx -g_{m1} \\cdot r_{o2}\n     \\]\n     where \\( r_{o2} \\) is the output resistance of M2.\n\n### Summary:\n- The circuit is a common-source amplifier with a current source load.\n- The input voltage \\( V_{in} \\) modulates the gate of M1, causing a change in the drain current of M1.\n- The drain current of M1 flows through M2, which is biased by \\( V_{b1} \\).\n- The current source \\( I_1 \\) ensures a constant current through M2, providing a high output impedance.\n- The small-signal voltage gain of the amplifier is determined by the transconductance of M1 and the output resistance of M2.\n\nThis configuration provides high gain and is commonly used in analog circuit design for amplification purposes.",
        "format": "markdown",
        "sha256": "318d61dad1c094679a47372d22c67aa22d48da5ddf1f639dfcbcdc626e2ed6ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies the NMOS devices and their connections, but misclassifies M2 as a load rather than a common-gate cascode and gives the incorrect gain \u001b[?]",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 777,
        "total_tokens": 1557,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 777,
        "total_tokens": 1557,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current source load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: NMOS transistor with gate voltage \\( V_{in} \\).\n2. **M2**: NMOS transistor with gate voltage \\( V_{b1} \\).\n3. **I1**: Current source providing a constant current \\( I_1 \\).\n4. **\\( V_{DD} \\)**: Supply voltage.\n5. **\\( V_{out} \\)**: Output voltage.\n\n### Operation:\n1. **M1 (Common-Source Amplifier)**:\n   - The gate of M1 is connected to the input voltage \\( V_{in} \\).\n   - The source of M1 is connected to ground.\n   - The drain of M1 is connected to the node \\( X \\).\n\n2. **M2 (Current Source Load)**:\n   - The gate of M2 is connected to a bias voltage \\( V_{b1} \\).\n   - The source of M2 is connected to the node \\( X \\).\n   - The drain of M2 is connected to the output node \\( V_{out} \\).\n\n3. **Current Source \\( I_1 \\)**:\n   - The current source \\( I_1 \\) is connected between \\( V_{DD} \\) and \\( V_{out} \\).\n\n### Analysis:\n1. **Biasing**:\n   - The bias voltage \\( V_{b1} \\) sets the operating point of M2.\n   - The current source \\( I_1 \\) ensures a constant current through M2.\n\n2. **Operation of M1**:\n   - When \\( V_{in} \\) increases, the gate-source voltage \\( V_{GS1} \\) of M1 increases, causing M1 to conduct more current.\n   - This increases the current through M1, which affects the voltage at node \\( X \\).\n\n3. **Operation of M2**:\n   - M2 is biased by \\( V_{b1} \\) and operates in saturation mode if \\( V_{DS2} \\) is sufficiently large.\n   - The current through M2 is determined by the bias voltage \\( V_{b1} \\) and the characteristics of the transistor.\n\n4. **Output Voltage \\( V_{out} \\)**:\n   - The output voltage \\( V_{out} \\) is determined by the voltage drop across M2 and the current source \\( I_1 \\).\n   - As \\( V_{in} \\) changes, the current through M1 changes, which affects the voltage at node \\( X \\).\n   - The voltage at node \\( X \\) affects the drain-source voltage \\( V_{DS2} \\) of M2, which in turn affects \\( V_{out} \\).\n\n### Small-Signal Analysis:\nFor small-signal analysis, we consider the variations around the operating point.\n\n1. **Small-Signal Model**:\n   - M1 can be modeled as a transconductance amplifier with transconductance \\( g_{m1} \\).\n   - M2 can be modeled as a resistor \\( r_{o2} \\) (output resistance of M2).\n\n2. **Small-Signal Gain**:\n   - The small-signal voltage gain \\( A_v \\) of the amplifier can be approximated as:\n     \\[\n     A_v = -g_{m1} \\cdot r_{o2}\n     \\]\n   - Here, \\( g_{m1} \\) is the transconductance of M1, and \\( r_{o2} \\) is the output resistance of M2.\n\n### Summary:\n- The circuit is a common-source amplifier with a current source load.\n- The input voltage \\( V_{in} \\) controls the current through M1.\n- The current through M1 affects the voltage at node \\( X \\), which in turn affects the output voltage \\( V_{out} \\).\n- The small-signal voltage gain is determined by the transconductance of M1 and the output resistance of M2.\n\nThis analysis provides a basic understanding of the operation and characteristics of the circuit.",
        "format": "markdown",
        "sha256": "e45a78204c2d1c3819870e4217548436f071f91ed48cc8cc96407d90f1c62aa1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the NMOS devices and M1’s common-source input role, but misclassifies M2 as a load rather than a common-gate cascode and gives a gain that omits the cascode’s boosted output resistance.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 863,
        "total_tokens": 1643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 863,
        "total_tokens": 1643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current source load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: NMOS transistor with gate voltage \\( V_{in} \\).\n2. **M2**: NMOS transistor with gate voltage \\( V_{b1} \\).\n3. **I1**: Current source providing a constant current \\( I_1 \\).\n4. **\\( V_{DD} \\)**: Supply voltage.\n5. **\\( V_{out} \\)**: Output voltage.\n\n### Operation:\n1. **M1 (Common-Source Amplifier)**:\n   - The gate of M1 is connected to the input voltage \\( V_{in} \\).\n   - The source of M1 is connected to ground.\n   - The drain of M1 is connected to the node \\( X \\).\n\n2. **M2 (Current Source Load)**:\n   - The gate of M2 is connected to a bias voltage \\( V_{b1} \\).\n   - The source of M2 is connected to the node \\( X \\).\n   - The drain of M2 is connected to the output node \\( V_{out} \\).\n\n3. **Current Source \\( I_1 \\)**:\n   - The current source \\( I_1 \\) is connected between \\( V_{DD} \\) and the output node \\( V_{out} \\).\n\n### Analysis:\n1. **Biasing**:\n   - The bias voltage \\( V_{b1} \\) sets the operating point of M2.\n   - The current source \\( I_1 \\) ensures a constant current through M2.\n\n2. **Operation of M1**:\n   - When \\( V_{in} \\) increases, the gate-source voltage \\( V_{GS1} \\) of M1 increases, causing M1 to conduct more current.\n   - This increases the current through M1, which affects the voltage at node \\( X \\).\n\n3. **Operation of M2**:\n   - M2 is biased by \\( V_{b1} \\) and operates as a current source load.\n   - The current through M2 is determined by \\( V_{b1} \\) and the characteristics of M2.\n\n4. **Output Voltage \\( V_{out} \\)**:\n   - The output voltage \\( V_{out} \\) is determined by the voltage drop across M2 and the current source \\( I_1 \\).\n   - As \\( V_{in} \\) changes, the current through M1 changes, which affects the voltage at node \\( X \\).\n   - The voltage at node \\( X \\) affects the current through M2, which in turn affects \\( V_{out} \\).\n\n### Small-Signal Analysis:\nFor small-signal analysis, we consider the variations around the operating point.\n\n1. **Small-Signal Model**:\n   - M1 can be modeled with its transconductance \\( g_{m1} \\) and output resistance \\( r_{o1} \\).\n   - M2 can be modeled with its transconductance \\( g_{m2} \\) and output resistance \\( r_{o2} \\).\n\n2. **Voltage Gain**:\n   - The small-signal voltage gain \\( A_v \\) of the amplifier can be approximated as:\n     \\[\n     A_v = -g_{m1} \\cdot (r_{o1} || r_{o2})\n     \\]\n   - Here, \\( r_{o1} \\) and \\( r_{o2} \\) are the output resistances of M1 and M2, respectively.\n\n### Summary:\n- The circuit is a common-source amplifier with a current source load.\n- The input voltage \\( V_{in} \\) controls the gate of M1, affecting the current through M1.\n- The current source \\( I_1 \\) and M2 set the output voltage \\( V_{out} \\).\n- The voltage gain is determined by the transconductance of M1 and the output resistances of M1 and M2.\n\nThis analysis provides a basic understanding of the circuit's operation and its small-signal behavior.",
        "format": "markdown",
        "sha256": "62d6f794b0a808a64f967ad468b0e83e59cc5de6b12dce89103e506a94c49331"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer identifies the NMOS devices and their connections, but misses that M2 is a common-gate cascode and treats it as a current-source load. Its gain formula omits the cascode’s boosted output resistance and is incorrect.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 863,
        "total_tokens": 1643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 863,
        "total_tokens": 1643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit shown in the figure is a cascode structure. \n\nA cascode amplifier typically consists of two transistors stacked one on top of the other. In this figure, transistor \\( M_1 \\) is the common-source transistor, and transistor \\( M_2 \\) is the common-gate transistor. The gate of \\( M_2 \\) is biased with a voltage \\( V_{b1} \\), and the drain of \\( M_2 \\) is connected to the load resistor \\( R_D \\) and the supply voltage \\( V_{DD} \\). The output \\( V_{out} \\) is taken from the drain of \\( M_2 \\).\n\nThis configuration improves the gain and bandwidth of the amplifier by reducing the Miller effect and increasing the output impedance.",
        "format": "markdown",
        "sha256": "39042e451fcffab747a57fe50a11fb3c2967fc366f3fa04e827b88207fce3e08"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a common-source device; M1 is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 161,
        "total_tokens": 945,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 161,
        "total_tokens": 945,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit shown in the figure is a cascode structure. \n\nA cascode amplifier typically consists of two transistors stacked on top of each other. In this circuit, transistor \\( M_1 \\) is the common-source transistor, and transistor \\( M_2 \\) is the common-gate transistor. The gate of \\( M_2 \\) is biased with a constant voltage \\( V_{b1} \\), and the drain of \\( M_2 \\) is connected to the load resistor \\( R_D \\) and the supply voltage \\( V_{DD} \\). The input signal \\( V_{in} \\) is applied to the gate of \\( M_1 \\), and the output \\( V_{out} \\) is taken from the drain of \\( M_2 \\).\n\nThis configuration improves the gain and bandwidth of the amplifier by reducing the Miller effect and increasing the output impedance.",
        "format": "markdown",
        "sha256": "3439b42df7772b57670aefeece3c34cb34e05a14789051608930b383ea0a1753"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as common-source; M1 is a PMOS source follower, so the circuit lacks the cascode resistance boost.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 184,
        "total_tokens": 968,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 184,
        "total_tokens": 968,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit shown in the figure is a cascode structure. \n\nA cascode structure typically consists of two transistors stacked on top of each other. In this figure, transistor \\( M_1 \\) is the common-source transistor, and transistor \\( M_2 \\) is the common-gate transistor. The gate of \\( M_2 \\) is biased with \\( V_{b1} \\), and the source of \\( M_2 \\) is connected to the drain of \\( M_1 \\). The drain of \\( M_2 \\) is connected to the load resistor \\( R_D \\) and the supply voltage \\( V_{DD} \\). The output \\( V_{out} \\) is taken from the drain of \\( M_2 \\).\n\nThis configuration improves the gain and bandwidth of the amplifier by reducing the Miller effect and increasing the output impedance.",
        "format": "markdown",
        "sha256": "196271fa6bee1f354fdc7929c3dc6d06d2dc247c33bb51e9d49b374bb0d8193a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower, not a common-source stage, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 179,
        "total_tokens": 963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 179,
        "total_tokens": 963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect refers to the phenomenon where the effective capacitance between the input and output of an amplifier stage is increased due to the amplification factor of the stage. This can significantly affect the frequency response and bandwidth of the amplifier.\n\nIn a cascode configuration, the Miller effect is less pronounced for several reasons:\n\n1. **Isolation of the Input Stage**: In a cascode amplifier, the input transistor (common-emitter or common-source) is followed by a second transistor (common-base or common-gate). The second transistor provides a high impedance at its input, which isolates the input stage from the output stage. This isolation reduces the feedback capacitance that contributes to the Miller effect.\n\n2. **Low Gain of the Input Stage**: The input transistor in a cascode configuration typically operates with a lower voltage gain compared to a single-stage amplifier. Since the Miller effect is proportional to the gain of the stage, the lower gain of the input stage in a cascode reduces the multiplication of the parasitic capacitance.\n\n3. **High Output Impedance**: The output impedance of the cascode configuration is higher than that of a single-stage amplifier. This high output impedance reduces the effect of the capacitance between the input and output, further mitigating the Miller effect.\n\n4. **Reduced Feedback Capacitance**: In a cascode amplifier, the feedback capacitance (Cgd or Ccb) is effectively split between the two transistors. The second transistor's high impedance at its input reduces the effective feedback capacitance seen by the input transistor, thereby reducing the Miller effect.\n\nOverall, the cascode configuration's ability to isolate the input stage, operate with lower gain, and present high output impedance results in a significant reduction of the Miller effect, leading to improved frequency response and bandwidth.",
        "format": "markdown",
        "sha256": "c997e89eb2422b910dd3ac189e60b7b13825665d836735a10d086140ecee09c5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly notes that the input transistor’s lower gain reduces capacitance multiplication, but misses the key cause: M1’s drain is driven by the low-impedance source of M2. It incorrectly describes that input as high impedance and claims the capacitance is split and high output impedance reduces Miller effect.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 359,
        "total_tokens": 379,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 359,
        "total_tokens": 379,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect refers to the phenomenon where the effective capacitance between the input and output of an amplifier stage is increased due to the amplification factor of the stage. This can significantly affect the frequency response and bandwidth of the amplifier.\n\nIn a common-emitter amplifier, the Miller effect is pronounced because the voltage gain from the collector to the base is high. The capacitance between the collector and base (C_cb) is multiplied by the gain, resulting in a much larger effective capacitance at the input, which can limit the high-frequency performance.\n\nA cascode amplifier, on the other hand, consists of two transistors in series: a common-emitter stage followed by a common-base stage. The key reason the Miller effect is less pronounced in a cascode configuration is due to the common-base stage. In a cascode amplifier:\n\n1. **Isolation of Stages**: The common-base transistor isolates the input stage from the output stage. The voltage gain from the collector of the common-emitter transistor to the base of the common-base transistor is low, typically close to unity. This means that the Miller capacitance is not significantly multiplied.\n\n2. **Low Gain at the Input Stage**: The common-emitter stage in a cascode configuration has a low voltage gain because the load is the low impedance looking into the emitter of the common-base stage. This low gain reduces the multiplication factor of the Miller capacitance.\n\n3. **High Output Impedance**: The common-base stage has a high output impedance, which helps in maintaining a high overall gain without significantly affecting the input capacitance.\n\nAs a result, the effective input capacitance due to the Miller effect is much smaller in a cascode amplifier compared to a single common-emitter stage. This leads to better high-frequency performance and wider bandwidth for the cascode amplifier.\n\nIn summary, the Miller effect is less pronounced in a cascode amplifier because the common-base stage provides isolation between the input and output, reducing the multiplication of the capacitance and thereby improving the high-frequency response.",
        "format": "markdown",
        "sha256": "6a03a8663744ea7d8d90baa37a32312d8ef17e5895a9df16571fcce667b2c22e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the common-base device presents a low impedance at the first transistor’s output, keeping its voltage gain—and thus Miller multiplication—small compared with a single common-emitter stage. The near-unity intermediate gain is consistent with the remaining roughly twofold capacitance factor.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 408,
        "total_tokens": 428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 408,
        "total_tokens": 428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect refers to the phenomenon where the effective capacitance between the input and output of an amplifier stage is increased due to the amplification factor of the stage. This can significantly affect the frequency response and bandwidth of the amplifier.\n\nIn a cascode configuration, the Miller effect is less pronounced for several reasons:\n\n1. **Isolation of the Input Stage**: In a cascode amplifier, the input transistor (common-emitter or common-source) is followed by a second transistor (common-base or common-gate). The second transistor isolates the input stage from the output stage. This isolation reduces the feedback capacitance between the input and output, thereby minimizing the Miller effect.\n\n2. **High Output Impedance of the Common-Base/Common-Gate Stage**: The second transistor in the cascode configuration typically has a high output impedance. This high impedance reduces the voltage gain from the input to the output of the first transistor, which in turn reduces the multiplication factor of the Miller capacitance.\n\n3. **Reduced Voltage Gain of the Input Stage**: The voltage gain of the input stage in a cascode amplifier is lower compared to a single-stage amplifier. Since the Miller effect is proportional to the gain, a lower gain results in a smaller Miller capacitance.\n\n4. **Improved Frequency Response**: By reducing the Miller capacitance, the cascode configuration improves the frequency response and bandwidth of the amplifier. This makes the cascode amplifier more suitable for high-frequency applications.\n\nOverall, the cascode configuration effectively mitigates the Miller effect by isolating the input and output stages, reducing the gain of the input stage, and leveraging the high output impedance of the second stage. This results in better performance in terms of bandwidth and frequency response.",
        "format": "markdown",
        "sha256": "0e8bf861c0d54f7586ff55710698222bb2cf319fdcf3bbdcd0e9887a991e7352"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer reaches the right conclusion that a cascode reduces Miller effect, but misses the key mechanism: M1’s drain is loaded by the low-impedance source of the common-gate transistor, so the gain across Cgd1 is only about −1 and its Miller multiplication is roughly 2. Attributing the reduction to the common-gate stage’s high output impedance is misleading.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 347,
        "total_tokens": 367,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 347,
        "total_tokens": 367,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current mirror load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: PMOS transistor acting as the load.\n2. **M2**: NMOS transistor acting as the amplifier.\n3. **Vb1**: Bias voltage for the NMOS transistor.\n4. **Vb2**: Bias voltage for the PMOS transistor.\n5. **VDD**: Supply voltage.\n6. **Vin**: Input voltage.\n7. **Vout**: Output voltage.\n\n### Operation:\n1. **Biasing**:\n   - **M1**: The gate of M1 is connected to a bias voltage \\( V_{b2} \\). This sets the operating point of M1.\n   - **M2**: The gate of M2 is connected to a bias voltage \\( V_{b1} \\). This sets the operating point of M2.\n\n2. **Amplification**:\n   - **M2**: The input signal \\( V_{in} \\) is applied to the gate of M2. The NMOS transistor M2 operates in the saturation region if \\( V_{in} \\) is sufficiently high to keep \\( V_{GS} \\) above the threshold voltage \\( V_{th} \\).\n   - **M1**: The PMOS transistor M1 acts as a current source load. It mirrors the current flowing through M2, providing a high impedance load.\n\n### Analysis:\n1. **DC Biasing**:\n   - The bias voltages \\( V_{b1} \\) and \\( V_{b2} \\) are chosen such that both transistors operate in the saturation region.\n   - For M2 to be in saturation, \\( V_{DS2} \\) must be greater than \\( V_{GS2} - V_{th2} \\).\n   - For M1 to be in saturation, \\( V_{SD1} \\) must be greater than \\( V_{SG1} - V_{th1} \\).\n\n2. **Small-Signal Analysis**:\n   - The small-signal input \\( v_{in} \\) causes a small-signal output \\( v_{out} \\).\n   - The small-signal transconductance \\( g_m \\) of M2 is given by \\( g_{m2} = \\frac{2I_{D2}}{V_{GS2} - V_{th2}} \\).\n   - The output resistance \\( r_{o1} \\) of M1 is given by \\( r_{o1} = \\frac{1}{\\lambda I_{D1}} \\), where \\( \\lambda \\) is the channel-length modulation parameter.\n\n3. **Voltage Gain**:\n   - The voltage gain \\( A_v \\) of the amplifier is given by \\( A_v = -g_{m2} \\cdot r_{o1} \\).\n   - The negative sign indicates a phase inversion between the input and output signals.\n\n### Summary:\n- The circuit is a common-source amplifier with a current mirror load.\n- The PMOS transistor M1 acts as a high impedance load, providing a high gain.\n- The NMOS transistor M2 amplifies the input signal.\n- Proper biasing ensures both transistors operate in the saturation region for optimal performance.\n- The voltage gain is determined by the transconductance of M2 and the output resistance of M1.",
        "format": "markdown",
        "sha256": "89ba989960fcdf025ac88d604914bac41488956f91175f61f664755156797940"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly places Vin at M2’s gate and identifies a common-source stage. The actual circuit is common-gate, with Vin at M2’s source, so the stated inverting gain is also wrong.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 714,
        "total_tokens": 1494,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 714,
        "total_tokens": 1494,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current mirror load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: PMOS transistor acting as the load.\n2. **M2**: NMOS transistor acting as the amplifier.\n3. **Vb1**: Bias voltage for the NMOS transistor.\n4. **Vb2**: Bias voltage for the PMOS transistor.\n5. **VDD**: Supply voltage.\n6. **Vin**: Input voltage.\n7. **Vout**: Output voltage.\n\n### Operation:\n1. **Biasing**:\n   - **M1**: The gate of M1 is connected to a bias voltage \\( Vb2 \\). This sets the operating point of M1.\n   - **M2**: The gate of M2 is connected to a bias voltage \\( Vb1 \\). This sets the operating point of M2.\n\n2. **Amplification**:\n   - **M2**: The input signal \\( Vin \\) is applied to the gate of M2. The NMOS transistor M2 operates in the saturation region if \\( V_{GS2} > V_{th2} \\) (where \\( V_{GS2} \\) is the gate-source voltage of M2 and \\( V_{th2} \\) is the threshold voltage of M2).\n   - **M1**: The PMOS transistor M1 operates in the saturation region if \\( V_{SG1} > V_{th1} \\) (where \\( V_{SG1} \\) is the source-gate voltage of M1 and \\( V_{th1} \\) is the threshold voltage of M1).\n\n### Current Mirror:\n- The PMOS transistor M1 acts as a current mirror load. The current through M1 is mirrored from the current through M2. This configuration helps in providing a high output impedance, which is beneficial for amplification.\n\n### Voltage Gain:\n- The voltage gain \\( A_v \\) of the common-source amplifier can be approximated as:\n  \\[\n  A_v \\approx -\\frac{g_{m2}}{g_{m1}}\n  \\]\n  where \\( g_{m2} \\) is the transconductance of M2 and \\( g_{m1} \\) is the transconductance of M1.\n\n### Output Voltage:\n- The output voltage \\( Vout \\) is taken from the drain of M2. As \\( Vin \\) increases, the current through M2 increases, causing a larger voltage drop across M1, which results in a decrease in \\( Vout \\).\n\n### Summary:\n- The circuit is a common-source amplifier with a current mirror load.\n- M2 amplifies the input signal \\( Vin \\).\n- M1 provides a high output impedance and mirrors the current from M2.\n- The output voltage \\( Vout \\) is inversely related to the input voltage \\( Vin \\).\n\nThis configuration is commonly used in analog integrated circuits for its high gain and good performance characteristics.",
        "format": "markdown",
        "sha256": "caf9a4ac3a11787676a1069d1e7b578e7b3c75785e5813c703bdae1a6d8abd6c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly places Vin at M2's gate and identifies the circuit as common-source. Vin is applied at M2's source, making this a common-gate stage with non-inverting gain.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 629,
        "total_tokens": 1409,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 629,
        "total_tokens": 1409,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current mirror load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: PMOS transistor acting as the load.\n2. **M2**: NMOS transistor acting as the amplifier.\n3. **Vb1**: Bias voltage for the NMOS transistor.\n4. **Vb2**: Bias voltage for the PMOS transistor.\n5. **VDD**: Supply voltage.\n6. **Vin**: Input voltage.\n7. **Vout**: Output voltage.\n\n### Operation:\n1. **Biasing**:\n   - **M1**: The gate of M1 is connected to a bias voltage \\( Vb2 \\). This sets the operating point of M1.\n   - **M2**: The gate of M2 is connected to a bias voltage \\( Vb1 \\). This sets the operating point of M2.\n\n2. **Amplification**:\n   - **M2**: The input signal \\( Vin \\) is applied to the gate of M2. M2 operates in the saturation region if \\( V_{GS2} > V_{th2} \\), where \\( V_{GS2} \\) is the gate-source voltage of M2 and \\( V_{th2} \\) is the threshold voltage of M2.\n   - **M1**: M1 acts as a current source load for M2. The current through M1 is mirrored from another part of the circuit (not shown in the figure), typically from a reference current source.\n\n### Analysis:\n1. **DC Analysis**:\n   - The bias voltages \\( Vb1 \\) and \\( Vb2 \\) set the DC operating points of M2 and M1 respectively.\n   - The current through M2 is determined by the bias voltage \\( Vb1 \\) and the input voltage \\( Vin \\).\n\n2. **AC Analysis**:\n   - The small signal input \\( Vin \\) modulates the current through M2.\n   - The output voltage \\( Vout \\) is taken at the drain of M2. The voltage gain \\( A_v \\) of the amplifier can be approximated as:\n     \\[\n     A_v \\approx -g_{m2} \\cdot R_{out}\n     \\]\n     where \\( g_{m2} \\) is the transconductance of M2 and \\( R_{out} \\) is the output resistance seen at the drain of M2.\n\n### Key Points:\n- **Common-Source Configuration**: M2 is in a common-source configuration, providing voltage amplification.\n- **Current Mirror Load**: M1 acts as a current mirror load, providing a high output resistance which enhances the voltage gain.\n- **Biasing**: Proper biasing of M1 and M2 is crucial for the correct operation of the amplifier.\n\n### Conclusion:\nThe circuit is a common-source amplifier with a current mirror load. The PMOS transistor M1 acts as a load, and the NMOS transistor M2 acts as the amplifying device. The bias voltages \\( Vb1 \\) and \\( Vb2 \\) set the operating points of the transistors, and the input signal \\( Vin \\) is amplified to produce the output signal \\( Vout \\).",
        "format": "markdown",
        "sha256": "5b96d003fca119b076abb20e4bed406af674dfd9af5c17ebf1195103103d2fd6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly places Vin at M2’s gate and identifies the circuit as common-source; Vin is applied at M2’s source, making this a common-gate stage.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 683,
        "total_tokens": 1463,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 683,
        "total_tokens": 1463,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a cascode configuration. To determine the number of poles in this circuit, we need to identify the capacitive elements that contribute to the frequency response.\n\nThe capacitive elements in the circuit are:\n1. \\( C_{GS} \\) - Gate-to-Source capacitance of \\( M_1 \\)\n2. \\( C_{GD} \\) - Gate-to-Drain capacitance of \\( M_1 \\)\n3. \\( C_{DB} \\) - Drain-to-Bulk capacitance of \\( M_1 \\)\n4. \\( C_{GD2} \\) - Gate-to-Drain capacitance of \\( M_2 \\)\n5. \\( C_{DB2} \\) - Drain-to-Bulk capacitance of \\( M_2 \\)\n\nEach of these capacitors introduces a pole in the frequency response of the circuit. Therefore, the number of poles in the circuit is equal to the number of these capacitive elements.\n\nThus, the circuit has 5 poles.",
        "format": "markdown",
        "sha256": "78c4126e54f87a4829328d51b6183c1f0402300351f55c54d6ef9dbe83ee0e83"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly identifies a cascode and counts each capacitor as a separate pole, concluding five instead of two. It does identify several relevant capacitors, but misses that they share only two independent nodes.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 213,
        "total_tokens": 997,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 213,
        "total_tokens": 997,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a cascode configuration. To determine the number of poles, we need to consider the capacitive elements in the circuit that contribute to the frequency response. The capacitors in the circuit are:\n\n1. \\( C_{GS} \\) - Gate-to-Source capacitance of \\( M_1 \\)\n2. \\( C_{GD} \\) - Gate-to-Drain capacitance of \\( M_1 \\)\n3. \\( C_{DB} \\) - Drain-to-Bulk capacitance of \\( M_1 \\)\n4. \\( C_{GD2} \\) - Gate-to-Drain capacitance of \\( M_2 \\)\n5. \\( C_{DB2} \\) - Drain-to-Bulk capacitance of \\( M_2 \\)\n\nEach of these capacitors introduces a pole in the frequency response of the circuit. Therefore, the circuit has 5 poles.",
        "format": "markdown",
        "sha256": "4b6c31b8800433084ba82334db4d129bad0f98b5f75c0aaee8e7a3686fa11898"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer recognizes several relevant capacitances but misidentifies the topology and incorrectly counts each capacitor as a separate pole. The circuit has two poles, corresponding to two independent nodes.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 192,
        "total_tokens": 976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 192,
        "total_tokens": 976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a cascode configuration. To determine the number of poles, we need to consider the capacitive elements in the circuit that contribute to the frequency response. The capacitors in the circuit are:\n\n1. \\( C_{GS} \\) - Gate-to-Source capacitance of \\( M_1 \\)\n2. \\( C_{GD} \\) - Gate-to-Drain capacitance of \\( M_1 \\)\n3. \\( C_{DB} \\) - Drain-to-Bulk capacitance of \\( M_1 \\)\n4. \\( C_{GD2} \\) - Gate-to-Drain capacitance of \\( M_2 \\)\n5. \\( C_{DB2} \\) - Drain-to-Bulk capacitance of \\( M_2 \\)\n\nEach of these capacitors introduces a pole in the frequency response of the circuit. Therefore, the circuit has 5 poles.",
        "format": "markdown",
        "sha256": "4b6c31b8800433084ba82334db4d129bad0f98b5f75c0aaee8e7a3686fa11898"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer recognizes several relevant capacitances but misidentifies the topology and incorrectly counts each capacitor as a separate pole. The circuit has two poles, corresponding to two independent nodes.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 192,
        "total_tokens": 976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 784,
        "output_tokens": 192,
        "total_tokens": 976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current mirror load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: NMOS transistor with its source connected to ground.\n2. **M2**: NMOS transistor with its source connected to the drain of M1.\n3. **RD**: Load resistor connected between the drain of M2 and the supply voltage \\( V_{DD} \\).\n4. **V_{in}**: Input voltage applied to the gate of M1.\n5. **V_{out}**: Output voltage taken from the drain of M2.\n\n### Operation:\n1. **M1 (Common-Source Amplifier)**:\n   - The input voltage \\( V_{in} \\) is applied to the gate of M1.\n   - The source of M1 is grounded, making it a common-source configuration.\n   - The drain current \\( I_{D1} \\) of M1 is controlled by \\( V_{in} \\).\n\n2. **M2 (Current Mirror Load)**:\n   - M2 is configured as a current mirror load.\n   - The gate of M2 is connected to the gate of M1, ensuring that both transistors have the same gate-source voltage \\( V_{GS} \\).\n   - The source of M2 is connected to the drain of M1, and the drain of M2 is connected to \\( V_{DD} \\) through the resistor \\( R_D \\).\n\n### Analysis:\n1. **Current Mirror Action**:\n   - Since M1 and M2 have the same gate-source voltage \\( V_{GS} \\), they will have the same drain current \\( I_{D1} = I_{D2} \\) (assuming both transistors are identical and operating in saturation).\n\n2. **Output Voltage \\( V_{out} \\)**:\n   - The output voltage \\( V_{out} \\) is taken from the drain of M2.\n   - The drain current \\( I_{D2} \\) flows through the resistor \\( R_D \\), creating a voltage drop across \\( R_D \\).\n   - The output voltage can be expressed as:\n     \\[\n     V_{out} = V_{DD} - I_{D2} R_D\n     \\]\n   - Since \\( I_{D2} = I_{D1} \\), the output voltage depends on the input voltage \\( V_{in} \\) through the relationship between \\( V_{in} \\) and \\( I_{D1} \\).\n\n### Small-Signal Analysis:\n1. **Small-Signal Model**:\n   - For small variations in \\( V_{in} \\), the small-signal drain current \\( i_{d1} \\) of M1 can be expressed as:\n     \\[\n     i_{d1} = g_{m1} v_{in}\n     \\]\n     where \\( g_{m1} \\) is the transconductance of M1.\n\n2. **Output Voltage Variation**:\n   - The small-signal output voltage \\( v_{out} \\) can be expressed as:\n     \\[\n     v_{out} = -i_{d2} R_D = -g_{m2} v_{in} R_D\n     \\]\n     where \\( g_{m2} \\) is the transconductance of M2.\n\n### Summary:\n- The circuit is a common-source amplifier with a current mirror load.\n- The output voltage \\( V_{out} \\) is inversely related to the input voltage \\( V_{in} \\) through the current mirror action.\n- The small-signal gain of the amplifier is given by \\( -g_{m2} R_D \\).\n\nThis configuration provides high gain and good linearity, making it suitable for analog signal amplification.",
        "format": "markdown",
        "sha256": "ccde8c5917e1c84dae6037e22711a5c5a8c2ab75efdd87d2168be4f29ab09333"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the series, common-gate NMOS pair as a current mirror, incorrectly assumes equal VGS and saturation for both devices, and gives an incorrect gain. It misses the key result that the lower triode-region device extends the effective channel length.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 787,
        "total_tokens": 1567,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 787,
        "total_tokens": 1567,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current mirror load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: NMOS transistor with its source connected to ground.\n2. **M2**: NMOS transistor with its source connected to the drain of M1.\n3. **RD**: Load resistor connected between the drain of M2 and \\( V_{DD} \\).\n4. **\\( V_{DD} \\)**: Supply voltage.\n5. **\\( V_{in} \\)**: Input voltage applied to the gate of M1.\n6. **\\( V_{out} \\)**: Output voltage taken from the drain of M2.\n\n### Operation:\n1. **M1 (Common-Source Amplifier)**:\n   - The input voltage \\( V_{in} \\) is applied to the gate of M1.\n   - The source of M1 is connected to ground, making it a common-source configuration.\n   - The drain current \\( I_{D1} \\) of M1 is controlled by \\( V_{in} \\).\n\n2. **M2 (Current Mirror Load)**:\n   - M2 is configured as a current mirror load.\n   - The gate and drain of M2 are connected together, ensuring that M2 operates in saturation.\n   - The current through M2, \\( I_{D2} \\), mirrors the current through M1, \\( I_{D1} \\).\n\n### Analysis:\n1. **Input Stage (M1)**:\n   - When \\( V_{in} \\) increases, the gate-source voltage \\( V_{GS1} \\) of M1 increases.\n   - This increases the drain current \\( I_{D1} \\) of M1.\n\n2. **Current Mirror (M2)**:\n   - The current \\( I_{D1} \\) through M1 is mirrored by M2.\n   - The drain current \\( I_{D2} \\) of M2 is approximately equal to \\( I_{D1} \\).\n\n3. **Output Voltage (\\( V_{out} \\))**:\n   - The output voltage \\( V_{out} \\) is taken from the drain of M2.\n   - \\( V_{out} \\) is given by:\n     \\[\n     V_{out} = V_{DD} - I_{D2} \\cdot R_D\n     \\]\n   - As \\( V_{in} \\) increases, \\( I_{D1} \\) increases, which in turn increases \\( I_{D2} \\).\n   - This causes a larger voltage drop across \\( R_D \\), reducing \\( V_{out} \\).\n\n### Summary:\n- The circuit functions as a common-source amplifier with a current mirror load.\n- The input voltage \\( V_{in} \\) controls the drain current \\( I_{D1} \\) of M1.\n- The current mirror formed by M2 ensures that \\( I_{D2} \\) mirrors \\( I_{D1} \\).\n- The output voltage \\( V_{out} \\) is inversely related to the input voltage \\( V_{in} \\).\n\nThis configuration provides high gain and is commonly used in analog integrated circuits for amplification purposes.",
        "format": "markdown",
        "sha256": "ba4b52748696695147a1f0863fff3ab716249ea793b89f00fb95c680f50d7ca2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It incorrectly treats M2 as a diode-connected current-mirror load. The gates of both series NMOS devices are tied to the input, and the key result—that they act approximately like one transistor with a longer effective channel—is missed.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 670,
        "total_tokens": 1450,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 670,
        "total_tokens": 1450,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current mirror load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: NMOS transistor with its source connected to ground.\n2. **M2**: NMOS transistor with its source connected to the drain of M1.\n3. **RD**: Load resistor connected between the drain of M2 and \\( V_{DD} \\).\n4. **\\( V_{DD} \\)**: Supply voltage.\n5. **\\( V_{in} \\)**: Input voltage applied to the gate of M1.\n6. **\\( V_{out} \\)**: Output voltage taken from the drain of M2.\n\n### Operation:\n1. **M1 (Common-Source Amplifier)**:\n   - The input voltage \\( V_{in} \\) is applied to the gate of M1.\n   - The source of M1 is connected to ground, making it a common-source configuration.\n   - The drain current \\( I_{D1} \\) of M1 is controlled by \\( V_{in} \\).\n\n2. **M2 (Current Mirror Load)**:\n   - M2 is configured as a current mirror load.\n   - The gate and drain of M2 are connected together, ensuring that M2 operates in saturation.\n   - The current through M2, \\( I_{D2} \\), mirrors the current through M1, \\( I_{D1} \\).\n\n3. **Output Voltage \\( V_{out} \\)**:\n   - The output voltage \\( V_{out} \\) is taken from the drain of M2.\n   - \\( V_{out} \\) is determined by the voltage drop across \\( RD \\) due to the current \\( I_{D2} \\).\n\n### Analysis:\n1. **Current through M1**:\n   - The current \\( I_{D1} \\) through M1 is given by the MOSFET equation in saturation:\n     \\[\n     I_{D1} = \\frac{1}{2} k' (W/L) (V_{in} - V_{th})^2\n     \\]\n     where \\( k' \\) is the process transconductance parameter, \\( W/L \\) is the width-to-length ratio of the MOSFET, and \\( V_{th} \\) is the threshold voltage.\n\n2. **Current through M2**:\n   - Since M2 is a current mirror, \\( I_{D2} \\approx I_{D1} \\).\n\n3. **Output Voltage \\( V_{out} \\)**:\n   - The output voltage \\( V_{out} \\) is given by:\n     \\[\n     V_{out} = V_{DD} - I_{D2} RD\n     \\]\n   - Substituting \\( I_{D2} \\approx I_{D1} \\):\n     \\[\n     V_{out} = V_{DD} - \\left( \\frac{1}{2} k' (W/L) (V_{in} - V_{th})^2 \\right) RD\n     \\]\n\n### Summary:\n- The circuit is a common-source amplifier with a current mirror load.\n- The input voltage \\( V_{in} \\) controls the current through M1.\n- The current through M1 is mirrored by M2.\n- The output voltage \\( V_{out} \\) is determined by the voltage drop across \\( RD \\) due to the current through M2.\n\nThis configuration provides high gain and good linearity, making it suitable for analog signal amplification.",
        "format": "markdown",
        "sha256": "7e86858534f35d36ce055a66c34e21c10dade2be8a27afce55f66aa7d59876c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the topology: M2 is not diode-connected or a current-mirror load, and both NMOS gates are driven by the same input. It therefore misses the triode-region lower device and the key result that the series pair behaves approximately like a transistor with a longer effective channel.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 742,
        "total_tokens": 1522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 742,
        "total_tokens": 1522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current source load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: NMOS transistor with gate connected to \\( V_{in} \\).\n2. **M2**: NMOS transistor with gate connected to \\( V_b \\).\n3. **\\( R_D \\)**: Drain resistor.\n4. **\\( I_1 \\)**: Current source.\n5. **\\( V_{DD} \\)**: Supply voltage.\n6. **\\( V_{out} \\)**: Output voltage.\n\n### Operation:\n1. **Biasing of M2**:\n   - \\( M2 \\) is biased with a constant voltage \\( V_b \\) at its gate.\n   - \\( M2 \\) operates in saturation mode if \\( V_{DS2} \\geq V_{GS2} - V_{th2} \\), where \\( V_{DS2} \\) is the drain-source voltage of \\( M2 \\), \\( V_{GS2} \\) is the gate-source voltage of \\( M2 \\), and \\( V_{th2} \\) is the threshold voltage of \\( M2 \\).\n   - The current \\( I_1 \\) sets the drain current \\( I_{D2} \\) of \\( M2 \\).\n\n2. **Operation of M1**:\n   - \\( M1 \\) is the amplifying transistor with its gate connected to the input signal \\( V_{in} \\).\n   - \\( M1 \\) operates in saturation mode if \\( V_{DS1} \\geq V_{GS1} - V_{th1} \\), where \\( V_{DS1} \\) is the drain-source voltage of \\( M1 \\), \\( V_{GS1} \\) is the gate-source voltage of \\( M1 \\), and \\( V_{th1} \\) is the threshold voltage of \\( M1 \\).\n\n### Analysis:\n1. **DC Analysis**:\n   - The current source \\( I_1 \\) sets the bias current through \\( M2 \\).\n   - The voltage at the drain of \\( M2 \\) (which is also the source of \\( M1 \\)) is determined by the current \\( I_1 \\) and the characteristics of \\( M2 \\).\n   - The drain current \\( I_{D1} \\) of \\( M1 \\) flows through \\( R_D \\), creating a voltage drop across \\( R_D \\).\n\n2. **AC Analysis**:\n   - The small-signal voltage gain \\( A_v \\) of the amplifier can be derived from the small-signal model of the transistors.\n   - The small-signal transconductance \\( g_m1 \\) of \\( M1 \\) is given by \\( g_m1 = \\frac{2I_{D1}}{V_{GS1} - V_{th1}} \\).\n   - The output voltage \\( V_{out} \\) is given by \\( V_{out} = V_{DD} - I_{D1} R_D \\).\n   - The small-signal voltage gain \\( A_v \\) is approximately \\( A_v = -g_m1 R_D \\).\n\n### Summary:\n- The circuit is a common-source amplifier with a current source load.\n- \\( M1 \\) is the amplifying transistor, and \\( M2 \\) is biased with a constant voltage \\( V_b \\).\n- The current source \\( I_1 \\) sets the bias current through \\( M2 \\).\n- The voltage gain of the amplifier is determined by the transconductance of \\( M1 \\) and the drain resistor \\( R_D \\).\n\nThis analysis provides a basic understanding of the operation and characteristics of the circuit. For a more detailed analysis, including the exact expressions for the small-signal parameters and the frequency response, further calculations and considerations are required.",
        "format": "markdown",
        "sha256": "e2e49ff04ba0098b88392aaacfe05386da98489795ef678604721988dd0f7e0b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the source-coupled pair as a common-source amplifier with a current-source load and gives an inverting gain. The actual circuit is a source follower driving a common-gate stage, with a non-inverting signal path.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 805,
        "total_tokens": 1585,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 805,
        "total_tokens": 1585,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current source load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: NMOS transistor with gate connected to \\( V_{in} \\).\n2. **M2**: NMOS transistor with gate connected to \\( V_b \\).\n3. **\\( R_D \\)**: Drain resistor.\n4. **\\( I_1 \\)**: Current source.\n5. **\\( V_{DD} \\)**: Supply voltage.\n6. **\\( V_{out} \\)**: Output voltage.\n\n### Operation:\n1. **Biasing of M2**:\n   - \\( M2 \\) is biased with a constant voltage \\( V_b \\) at its gate.\n   - \\( M2 \\) operates in saturation mode if \\( V_{DS2} \\geq V_{GS2} - V_{th2} \\), where \\( V_{DS2} \\) is the drain-source voltage of \\( M2 \\), \\( V_{GS2} \\) is the gate-source voltage of \\( M2 \\), and \\( V_{th2} \\) is the threshold voltage of \\( M2 \\).\n\n2. **Current Source \\( I_1 \\)**:\n   - The current source \\( I_1 \\) sets a constant current through \\( M2 \\).\n   - This current \\( I_1 \\) flows through \\( M2 \\) and \\( M1 \\).\n\n3. **Operation of M1**:\n   - \\( M1 \\) is the amplifying transistor with its gate connected to the input voltage \\( V_{in} \\).\n   - \\( M1 \\) operates in saturation mode if \\( V_{DS1} \\geq V_{GS1} - V_{th1} \\), where \\( V_{DS1} \\) is the drain-source voltage of \\( M1 \\), \\( V_{GS1} \\) is the gate-source voltage of \\( M1 \\), and \\( V_{th1} \\) is the threshold voltage of \\( M1 \\).\n\n### Output Voltage \\( V_{out} \\):\n- The output voltage \\( V_{out} \\) is taken at the drain of \\( M1 \\).\n- The voltage at the drain of \\( M1 \\) is given by:\n  \\[\n  V_{out} = V_{DD} - I_1 R_D\n  \\]\n- Since \\( I_1 \\) is constant, \\( V_{out} \\) depends on \\( V_{DD} \\) and \\( R_D \\).\n\n### Small-Signal Analysis:\n- For small-signal analysis, we consider the variations in \\( V_{in} \\) and their effect on \\( V_{out} \\).\n- The small-signal transconductance \\( g_m \\) of \\( M1 \\) is given by:\n  \\[\n  g_m = \\frac{2I_{D1}}{V_{GS1} - V_{th1}}\n  \\]\n  where \\( I_{D1} \\) is the drain current of \\( M1 \\).\n\n- The small-signal output voltage \\( v_{out} \\) is given by:\n  \\[\n  v_{out} = -g_m v_{in} R_D\n  \\]\n  where \\( v_{in} \\) is the small-signal input voltage.\n\n### Summary:\n- The circuit is a common-source amplifier with a current source load.\n- The output voltage \\( V_{out} \\) is determined by the supply voltage \\( V_{DD} \\), the drain resistor \\( R_D \\), and the current source \\( I_1 \\).\n- The small-signal gain of the amplifier is given by \\( -g_m R_D \\), where \\( g_m \\) is the transconductance of \\( M1 \\).\n\nThis analysis provides a basic understanding of the operation and behavior of the circuit.",
        "format": "markdown",
        "sha256": "781549f3b21548790850cc7681dfc3e975810b363e82e069e23b259cc3bddf22"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology and signal path: the output is at M2’s drain, and the shared tail current splits between M1 and M2. Its common-source gain expression and claimed output location are therefore fundamentally wrong.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 814,
        "total_tokens": 1594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 814,
        "total_tokens": 1594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current source load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: NMOS transistor with gate connected to \\( V_{in} \\).\n2. **M2**: NMOS transistor with gate connected to \\( V_b \\).\n3. **\\( R_D \\)**: Drain resistor.\n4. **\\( I_1 \\)**: Current source.\n5. **\\( V_{DD} \\)**: Supply voltage.\n6. **\\( V_{out} \\)**: Output voltage.\n\n### Operation:\n1. **Biasing of M2**:\n   - \\( M2 \\) is biased with a constant voltage \\( V_b \\) at its gate.\n   - \\( M2 \\) operates in saturation mode if \\( V_{DS2} \\geq V_{GS2} - V_{th2} \\), where \\( V_{DS2} \\) is the drain-source voltage of \\( M2 \\), \\( V_{GS2} \\) is the gate-source voltage of \\( M2 \\), and \\( V_{th2} \\) is the threshold voltage of \\( M2 \\).\n\n2. **Current Source \\( I_1 \\)**:\n   - The current source \\( I_1 \\) sets a constant current through \\( M2 \\).\n   - This current \\( I_1 \\) flows through \\( M2 \\) and \\( M1 \\).\n\n3. **Operation of M1**:\n   - \\( M1 \\) is the amplifying transistor with its gate connected to the input voltage \\( V_{in} \\).\n   - \\( M1 \\) operates in saturation mode if \\( V_{DS1} \\geq V_{GS1} - V_{th1} \\), where \\( V_{DS1} \\) is the drain-source voltage of \\( M1 \\), \\( V_{GS1} \\) is the gate-source voltage of \\( M1 \\), and \\( V_{th1} \\) is the threshold voltage of \\( M1 \\).\n\n### Output Voltage \\( V_{out} \\):\n- The output voltage \\( V_{out} \\) is taken at the drain of \\( M1 \\).\n- The voltage at the drain of \\( M1 \\) is given by:\n  \\[\n  V_{out} = V_{DD} - I_1 R_D\n  \\]\n- Since \\( I_1 \\) is constant, \\( V_{out} \\) depends on \\( V_{DD} \\) and \\( R_D \\).\n\n### Small-Signal Analysis:\n- For small-signal analysis, we consider the variations in \\( V_{in} \\) and their effect on \\( V_{out} \\).\n- The small-signal transconductance \\( g_m \\) of \\( M1 \\) is given by:\n  \\[\n  g_m = \\frac{2I_{D1}}{V_{GS1} - V_{th1}}\n  \\]\n  where \\( I_{D1} \\) is the drain current of \\( M1 \\).\n\n- The small-signal output voltage \\( v_{out} \\) is given by:\n  \\[\n  v_{out} = -g_m v_{in} R_D\n  \\]\n  where \\( v_{in} \\) is the small-signal input voltage.\n\n### Summary:\n- The circuit is a common-source amplifier with a current source load.\n- The output voltage \\( V_{out} \\) is determined by the supply voltage \\( V_{DD} \\), the drain resistor \\( R_D \\), and the current source \\( I_1 \\).\n- The small-signal gain of the amplifier is given by \\( -g_m R_D \\), where \\( g_m \\) is the transconductance of \\( M1 \\).\n\nThis analysis provides a basic understanding of the operation and behavior of the circuit.",
        "format": "markdown",
        "sha256": "781549f3b21548790850cc7681dfc3e975810b363e82e069e23b259cc3bddf22"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology and signal path: the output is at M2’s drain, and the shared tail current splits between M1 and M2. Its common-source gain expression and claimed output location are therefore fundamentally wrong.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 814,
        "total_tokens": 1594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 814,
        "total_tokens": 1594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a cascode configuration, where \\( M_1 \\) is the common-source transistor and \\( M_2 \\) is the cascode transistor. The output impedance of this circuit can be inductive due to the following reasons:\n\n1. **Cascode Configuration**: The cascode transistor \\( M_2 \\) increases the output impedance of the circuit. In a cascode configuration, the impedance looking into the drain of \\( M_1 \\) is increased because \\( M_2 \\) provides a high impedance path. This high impedance can exhibit inductive characteristics at high frequencies.\n\n2. **Parasitic Capacitances**: The MOSFETs \\( M_1 \\) and \\( M_2 \\) have parasitic capacitances, such as the gate-drain capacitance \\( C_{gd} \\) and the drain-source capacitance \\( C_{ds} \\). These capacitances, in combination with the high impedance provided by \\( M_2 \\), can create a resonant circuit that exhibits inductive behavior at certain frequencies.\n\n3. **Frequency Response**: At high frequencies, the impedance of the circuit can be dominated by the reactive components (capacitances and inductances). The combination of the high impedance from the cascode transistor and the parasitic capacitances can result in an inductive impedance. This is because the impedance of a capacitor decreases with frequency, while the impedance of an inductor increases with frequency. The overall impedance can thus appear inductive at higher frequencies.\n\n4. **Small-Signal Model**: In the small-signal model of the circuit, the output impedance can be analyzed using the hybrid-pi model of the MOSFETs. The impedance looking into the drain of \\( M_1 \\) is affected by the transconductance \\( g_m \\) and the output resistance \\( r_o \\) of \\( M_1 \\) and \\( M_2 \\). The combination of these elements can result in an inductive impedance at the output.\n\nIn summary, the output impedance of the circuit can be inductive due to the high impedance provided by the cascode configuration, the parasitic capacitances of the MOSFETs, and the frequency-dependent behavior of the reactive components in the circuit.",
        "format": "markdown",
        "sha256": "106d6f1c86b02edf87996d4f0915684ee40b8a1aacbf67ff30789fcfe8633fa2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the source follower as a cascode and attributes inductive behavior to generic parasitic-capacitance effects. It misses the key RS–CGS1 mechanism and the low- to high-frequency impedance transition.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1129,
        "output_tokens": 469,
        "total_tokens": 1598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1129,
        "output_tokens": 469,
        "total_tokens": 1598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a cascode configuration, where \\( M_1 \\) is the common-source transistor and \\( M_2 \\) is the cascode transistor. The output impedance of this circuit can be inductive due to the following reasons:\n\n1. **High Impedance Node**: The drain of \\( M_1 \\) is connected to the source of \\( M_2 \\), creating a high impedance node. This high impedance is due to the fact that \\( M_2 \\) provides a high resistance path to ground, effectively isolating the drain of \\( M_1 \\) from the power supply \\( V_{DD} \\).\n\n2. **Capacitive Effects**: The intrinsic capacitances of the MOSFETs, such as the gate-drain capacitance \\( C_{gd} \\) and the drain-source capacitance \\( C_{ds} \\), play a significant role. These capacitances, combined with the high impedance node, can create a resonant circuit that exhibits inductive behavior at certain frequencies.\n\n3. **Miller Effect**: The Miller effect can amplify the capacitance seen at the output node. The effective capacitance \\( C_{eff} \\) at the output node is given by:\n   \\[\n   C_{eff} = C_{gd}(1 + A_v)\n   \\]\n   where \\( A_v \\) is the voltage gain of the amplifier. This increased capacitance can interact with the high impedance to create an inductive reactance.\n\n4. **Frequency Response**: At higher frequencies, the impedance of the capacitive elements decreases, and the inductive behavior becomes more pronounced. The combination of the high impedance node and the capacitive elements can result in a frequency-dependent impedance that appears inductive.\n\n5. **Small-Signal Model**: In the small-signal model, the output impedance \\( Z_{out} \\) can be expressed as:\n   \\[\n   Z_{out} = r_{o1} \\parallel r_{o2} \\parallel \\left( \\frac{1}{j\\omega C_{eff}} \\right)\n   \\]\n   where \\( r_{o1} \\) and \\( r_{o2} \\) are the output resistances of \\( M_1 \\) and \\( M_2 \\), respectively, and \\( \\omega \\) is the angular frequency. At certain frequencies, the capacitive term can dominate, leading to an inductive impedance.\n\nIn summary, the output impedance of the cascode amplifier can be inductive due to the high impedance node created by \\( M_2 \\), the capacitive effects of the MOSFETs, the Miller effect, and the frequency response of the circuit. These factors combine to create an impedance that exhibits inductive characteristics at certain frequencies.",
        "format": "markdown",
        "sha256": "a7deaf7ca7de26307113457e06fc47d385ce1691cd9fcf36667d108a39412406"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the source follower as a cascode and misses the essential RS–CGS1 mechanism: Zout rises from about 1/gm1 to RS when CGS1 shorts the gate to the source. Its proposed parallel RC model is capacitive, not inductive.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1129,
        "output_tokens": 579,
        "total_tokens": 1708,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1129,
        "output_tokens": 579,
        "total_tokens": 1708,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a cascode configuration, where \\( M_1 \\) is the common-source transistor and \\( M_2 \\) is the cascode transistor. The output impedance of this circuit can be inductive due to the following reasons:\n\n1. **Cascode Configuration**: The cascode transistor \\( M_2 \\) increases the output impedance of the circuit. In a cascode configuration, the impedance looking into the drain of \\( M_1 \\) is increased because \\( M_2 \\) provides a high impedance path. This high impedance can exhibit inductive characteristics at high frequencies.\n\n2. **Parasitic Capacitances**: The MOSFETs \\( M_1 \\) and \\( M_2 \\) have parasitic capacitances associated with their terminals (gate, drain, and source). These parasitic capacitances, combined with the high impedance of the cascode configuration, can create a resonant circuit that exhibits inductive behavior at certain frequencies.\n\n3. **Frequency Response**: At high frequencies, the impedance of the circuit can be dominated by the reactive components (capacitances and inductances). The combination of the high impedance provided by the cascode transistor and the parasitic capacitances can result in an inductive impedance. This is because the impedance of a capacitor decreases with frequency, while the impedance of an inductor increases with frequency. The overall impedance can thus appear inductive at higher frequencies.\n\n4. **Small-Signal Model**: In the small-signal model of the circuit, the output impedance can be analyzed using the hybrid-pi model of the MOSFETs. The cascode transistor \\( M_2 \\) effectively isolates the output from the input, increasing the output impedance. The combination of the transconductance \\( g_m \\) of \\( M_1 \\) and the output resistance \\( r_o \\) of \\( M_2 \\) can result in an inductive impedance when considering the frequency-dependent behavior of the circuit.\n\nIn summary, the output impedance of the cascode amplifier can be inductive due to the high impedance provided by the cascode configuration, the parasitic capacitances of the MOSFETs, and the frequency-dependent behavior of the circuit.",
        "format": "markdown",
        "sha256": "bc9312717b2271c73ad22a6eeb88018aa6d29c05ef94924e83e7925d277d3e56"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the source follower as a cascode and misses the key mechanism: the RS–CGS1 network makes Zout transition from about 1/gm1 at low frequency to RS at high frequency. Its generic parasitic-capacitance and cascode claims do not explain the inductive behavior.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1129,
        "output_tokens": 461,
        "total_tokens": 1590,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1129,
        "output_tokens": 461,
        "total_tokens": 1590,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current source \\( I_{in} \\) providing the input current. Let's analyze the circuit step by step:\n\n### Components:\n1. **\\( M_1 \\)**: NMOS transistor acting as the main amplifying device.\n2. **\\( M_2 \\)**: NMOS transistor acting as a current source.\n3. **\\( R_{D1} \\)**: Drain resistor.\n4. **\\( V_{DD} \\)**: Supply voltage.\n5. **\\( I_{in} \\)**: Input current source.\n\n### Operation:\n1. **Current Source \\( I_{in} \\)**:\n   - The current source \\( I_{in} \\) provides a constant current to the node \\( X \\).\n\n2. **Transistor \\( M_2 \\)**:\n   - \\( M_2 \\) is configured as a current source. It sets the voltage at node \\( X \\) based on the current \\( I_{in} \\) and its own characteristics (threshold voltage \\( V_{th2} \\), transconductance \\( g_{m2} \\), etc.).\n\n3. **Transistor \\( M_1 \\)**:\n   - \\( M_1 \\) is configured as a common-source amplifier. The voltage at node \\( X \\) (which is the gate of \\( M_1 \\)) controls the current through \\( M_1 \\).\n   - The drain current of \\( M_1 \\) flows through the resistor \\( R_{D1} \\), creating a voltage drop across \\( R_{D1} \\).\n\n4. **Output Voltage \\( V_{out} \\)**:\n   - The output voltage \\( V_{out} \\) is taken from the drain of \\( M_1 \\).\n   - \\( V_{out} \\) is given by:\n     \\[\n     V_{out} = V_{DD} - I_{D1} R_{D1}\n     \\]\n     where \\( I_{D1} \\) is the drain current of \\( M_1 \\).\n\n### Analysis:\n1. **Node \\( X \\)**:\n   - The voltage at node \\( X \\) is determined by the current source \\( I_{in} \\) and the characteristics of \\( M_2 \\).\n   - Assuming \\( M_2 \\) is in saturation, the voltage at node \\( X \\) can be approximated by:\n     \\[\n     V_X \\approx V_{th2} + \\sqrt{\\frac{I_{in}}{K_{2}}}\n     \\]\n     where \\( K_{2} \\) is the process transconductance parameter for \\( M_2 \\).\n\n2. **Transistor \\( M_1 \\)**:\n   - The gate-source voltage \\( V_{GS1} \\) of \\( M_1 \\) is equal to \\( V_X \\).\n   - Assuming \\( M_1 \\) is in saturation, the drain current \\( I_{D1} \\) is given by:\n     \\[\n     I_{D1} = K_{1} (V_{GS1} - V_{th1})^2\n     \\]\n     where \\( K_{1} \\) is the process transconductance parameter for \\( M_1 \\) and \\( V_{th1} \\) is the threshold voltage of \\( M_1 \\).\n\n3. **Output Voltage \\( V_{out} \\)**:\n   - Substituting \\( I_{D1} \\) into the expression for \\( V_{out} \\):\n     \\[\n     V_{out} = V_{DD} - K_{1} (V_X - V_{th1})^2 R_{D1}\n     \\]\n\n### Summary:\n- The input current \\( I_{in} \\) sets the voltage at node \\( X \\) through \\( M_2 \\).\n- The voltage at node \\( X \\) controls the gate-source voltage of \\( M_1 \\), which in turn controls the drain current \\( I_{D1} \\).\n- The drain current \\( I_{D1} \\) flowing through \\( R_{D1} \\) determines the output voltage \\( V_{out} \\).\n\nThis circuit is a current-to-voltage converter, where the input current \\( I_{in} \\) is converted to an output voltage \\( V_{out} \\) through the operation of the transistors \\( M_1 \\) and \\( M_2 \\) and the resistor \\( R_{D1} \\).",
        "format": "markdown",
        "sha256": "7bf89db736d95ab97f7108da20475eea39b61228d4567647dfb42bb8a5a2abc4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M1 as a common-source stage driven by input current at X, but treats M2 as an independent current-setting device and misses that its gate is tied to Vout, creating positive feedback and possible instability or latching.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 939,
        "total_tokens": 1719,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 939,
        "total_tokens": 1719,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current source \\( I_{in} \\) and two MOSFETs \\( M_1 \\) and \\( M_2 \\). Let's analyze the circuit step by step.\n\n### Components and Configuration:\n1. **MOSFET \\( M_1 \\)**: \n   - **Drain** connected to \\( V_{DD} \\) through resistor \\( R_{D1} \\).\n   - **Source** connected to ground.\n   - **Gate** connected to node \\( X \\).\n\n2. **MOSFET \\( M_2 \\)**:\n   - **Drain** connected to node \\( X \\).\n   - **Source** connected to ground.\n   - **Gate** connected to ground.\n\n3. **Current Source \\( I_{in} \\)**:\n   - Connected to node \\( X \\) and ground.\n\n### Operation:\n1. **Current Source \\( I_{in} \\)**:\n   - The current source \\( I_{in} \\) provides a constant current to node \\( X \\).\n\n2. **MOSFET \\( M_2 \\)**:\n   - Since the gate of \\( M_2 \\) is connected to ground, \\( M_2 \\) operates in saturation mode if \\( V_{X} \\) (voltage at node \\( X \\)) is greater than the threshold voltage \\( V_{th} \\) of \\( M_2 \\).\n   - \\( M_2 \\) acts as a current source, mirroring the current \\( I_{in} \\).\n\n3. **MOSFET \\( M_1 \\)**:\n   - The gate of \\( M_1 \\) is connected to node \\( X \\).\n   - The drain current \\( I_{D1} \\) of \\( M_1 \\) is determined by the voltage \\( V_{X} \\) and the characteristics of \\( M_1 \\).\n\n### Analysis:\n1. **Node \\( X \\)**:\n   - The voltage at node \\( X \\) is determined by the current \\( I_{in} \\) and the characteristics of \\( M_2 \\).\n   - \\( V_{X} \\) is such that \\( M_2 \\) is in saturation mode, and it mirrors the current \\( I_{in} \\).\n\n2. **Output Voltage \\( V_{out} \\)**:\n   - The output voltage \\( V_{out} \\) is taken from the drain of \\( M_1 \\).\n   - \\( V_{out} \\) is given by:\n     \\[\n     V_{out} = V_{DD} - I_{D1} \\cdot R_{D1}\n     \\]\n   - \\( I_{D1} \\) is the drain current of \\( M_1 \\), which is influenced by \\( V_{X} \\).\n\n### Summary:\n- The current source \\( I_{in} \\) sets the voltage at node \\( X \\) by controlling the current through \\( M_2 \\).\n- The voltage at node \\( X \\) sets the gate voltage of \\( M_1 \\), which in turn controls the drain current \\( I_{D1} \\) of \\( M_1 \\).\n- The output voltage \\( V_{out} \\) is determined by the drain current \\( I_{D1} \\) and the resistor \\( R_{D1} \\).\n\nThis circuit is a basic example of a common-source amplifier with active load, where \\( M_2 \\) acts as a current source load for \\( M_1 \\).",
        "format": "markdown",
        "sha256": "86b3fe6a128bc796a7eb753b7d9eb3726fe735c8795bb914d51e16a2f0dfb570"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Correctly identifies M1 as a common-source stage driven by input current at X, but misreads M2’s gate connection and misses the positive-feedback loop and its instability/latching consequence.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 733,
        "total_tokens": 1513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 733,
        "total_tokens": 1513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current source \\( I_{in} \\) and two MOSFETs \\( M_1 \\) and \\( M_2 \\). Let's analyze the circuit step by step.\n\n### Components and Configuration:\n1. **MOSFET \\( M_1 \\)**: \n   - **Drain** connected to \\( V_{DD} \\) through resistor \\( R_{D1} \\).\n   - **Gate** connected to node \\( X \\).\n   - **Source** connected to ground.\n\n2. **MOSFET \\( M_2 \\)**:\n   - **Drain** connected to node \\( X \\).\n   - **Gate** connected to ground.\n   - **Source** connected to ground.\n\n3. **Current Source \\( I_{in} \\)**:\n   - Connected to node \\( X \\) and ground.\n\n### Operation:\n1. **Current Source \\( I_{in} \\)**:\n   - The current source \\( I_{in} \\) provides a constant current to node \\( X \\).\n\n2. **MOSFET \\( M_2 \\)**:\n   - Since the gate of \\( M_2 \\) is connected to ground, \\( M_2 \\) operates in saturation mode if \\( V_{X} \\) (voltage at node \\( X \\)) is greater than the threshold voltage \\( V_{th} \\) of \\( M_2 \\).\n   - \\( M_2 \\) acts as a current source, mirroring the current \\( I_{in} \\).\n\n3. **Node \\( X \\)**:\n   - The voltage at node \\( X \\) is determined by the current \\( I_{in} \\) and the characteristics of \\( M_2 \\).\n\n4. **MOSFET \\( M_1 \\)**:\n   - The gate of \\( M_1 \\) is connected to node \\( X \\).\n   - \\( M_1 \\) operates as a common-source amplifier.\n   - The drain current \\( I_{D1} \\) of \\( M_1 \\) is controlled by the gate voltage \\( V_{X} \\).\n\n5. **Output Voltage \\( V_{out} \\)**:\n   - The output voltage \\( V_{out} \\) is taken from the drain of \\( M_1 \\).\n   - \\( V_{out} \\) is given by \\( V_{out} = V_{DD} - I_{D1} R_{D1} \\).\n\n### Analysis:\n1. **Voltage at Node \\( X \\)**:\n   - The voltage \\( V_{X} \\) is set by the current source \\( I_{in} \\) and the characteristics of \\( M_2 \\).\n   - \\( V_{X} \\) can be approximated using the MOSFET equation in saturation: \\( I_{in} = \\frac{1}{2} k' (V_{X} - V_{th})^2 \\), where \\( k' \\) is the process transconductance parameter.\n\n2. **Drain Current \\( I_{D1} \\) of \\( M_1 \\)**:\n   - The drain current \\( I_{D1} \\) of \\( M_1 \\) is given by \\( I_{D1} = \\frac{1}{2} k' (V_{X} - V_{th})^2 \\).\n\n3. **Output Voltage \\( V_{out} \\)**:\n   - The output voltage \\( V_{out} \\) is given by \\( V_{out} = V_{DD} - I_{D1} R_{D1} \\).\n   - Substituting \\( I_{D1} \\) into the equation: \\( V_{out} = V_{DD} - \\frac{1}{2} k' (V_{X} - V_{th})^2 R_{D1} \\).\n\n### Summary:\n- The circuit is a common-source amplifier with a current source \\( I_{in} \\) and two MOSFETs \\( M_1 \\) and \\( M_2 \\).\n- The voltage at node \\( X \\) is determined by the current source \\( I_{in} \\) and the characteristics of \\( M_2 \\).\n- The output voltage \\( V_{out} \\) is a function of the drain current \\( I_{D1} \\) of \\( M_1 \\), which is controlled by the gate voltage \\( V_{X} \\).\n\nThis analysis provides a basic understanding of the circuit operation and the relationship between the components.",
        "format": "markdown",
        "sha256": "46d70a3d947bf404f36e1c0ca351e629b3ab8f7322a3bccc09ec1e762c25af9c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Correctly identifies M1 as a common-source stage driven by the input current at X, but misreads M2's gate connection, misses the positive-feedback loop, and consequently gives an incorrect operating analysis.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 945,
        "total_tokens": 1725,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 945,
        "total_tokens": 1725,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a common-source amplifier with active load and feedback. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1 and M2**: These are MOSFETs (Metal-Oxide-Semiconductor Field-Effect Transistors).\n2. **\\(R_{D1}\\) and \\(R_{D2}\\)**: These are resistors connected to the drain of M1 and M2 respectively.\n3. **\\(R_F\\)**: This is a feedback resistor.\n4. **\\(V_{DD}\\)**: This is the supply voltage.\n5. **\\(V_b\\)**: This is the bias voltage applied to the gate of M2.\n6. **\\(I_{in}\\)**: This is the input current source.\n\n### Operation:\n1. **M1 Operation**:\n   - The input current \\(I_{in}\\) flows through \\(R_F\\) and generates a voltage drop across \\(R_F\\).\n   - This voltage drop is applied to the gate of M1, controlling its operation.\n   - The drain current of M1 flows through \\(R_{D1}\\), creating a voltage drop across \\(R_{D1}\\).\n\n2. **M2 Operation**:\n   - The gate of M2 is biased by \\(V_b\\), which sets the operating point of M2.\n   - The drain current of M2 flows through \\(R_{D2}\\), creating a voltage drop across \\(R_{D2}\\).\n   - The source of M2 is connected to ground.\n\n### Feedback Mechanism:\n- The feedback resistor \\(R_F\\) connects the output \\(V_{out}\\) to the input node X.\n- The current \\(i_{RF}\\) through \\(R_F\\) is fed back to the input, influencing the voltage at node X.\n- This feedback helps stabilize the operating point and gain of the amplifier.\n\n### Voltage at Node X:\n- The voltage at node X is determined by the voltage drop across \\(R_F\\) due to \\(I_{in}\\) and the feedback current \\(i_{RF}\\).\n\n### Output Voltage \\(V_{out}\\):\n- The output voltage \\(V_{out}\\) is taken from the drain of M2.\n- \\(V_{out}\\) is influenced by the drain current of M2 and the voltage drop across \\(R_{D2}\\).\n\n### Analysis:\n1. **DC Analysis**:\n   - Determine the DC operating point by analyzing the biasing conditions.\n   - Calculate the voltage at node X considering \\(I_{in}\\) and \\(R_F\\).\n   - Determine the drain currents of M1 and M2 based on their gate-source voltages.\n\n2. **AC Analysis**:\n   - Small-signal analysis can be performed to determine the gain and frequency response.\n   - The small-signal parameters of M1 and M2 (transconductance \\(g_m\\), output resistance \\(r_o\\)) are used to analyze the amplifier's behavior.\n\n### Equations:\n1. **Voltage at Node X**:\n   \\[\n   V_X = I_{in} \\cdot R_F + i_{RF} \\cdot R_F\n   \\]\n\n2. **Output Voltage \\(V_{out}\\)**:\n   \\[\n   V_{out} = V_{DD} - I_{D2} \\cdot R_{D2}\n   \\]\n   where \\(I_{D2}\\) is the drain current of M2.\n\n3. **Feedback Current \\(i_{RF}\\)**:\n   \\[\n   i_{RF} = \\frac{V_{out} - V_X}{R_F}\n   \\]\n\n### Summary:\n- The circuit is a common-source amplifier with active load and feedback.\n- The feedback resistor \\(R_F\\) stabilizes the operating point and gain.\n- The output voltage \\(V_{out}\\) is influenced by the drain current of M2 and the voltage drop across \\(R_{D2}\\).\n- DC and AC analysis can be performed to determine the operating point and frequency response of the amplifier.",
        "format": "markdown",
        "sha256": "c399baa614df95e0a171a5f8eb9a4c2495d11e2aace55912ae5c28ba06e4e6a3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies both key connections: M1’s gate is fixed at Vb and the input is at its source, while M2 is driven by node X. It therefore misses the common-gate input stage and transimpedance-feedback operation. It earns limited credit for recognizing M2 as a grounded-source stage and RF as feedback.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 842,
        "total_tokens": 1622,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 842,
        "total_tokens": 1622,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with active load and feedback. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1 and M2**: These are MOSFET transistors.\n2. **\\(R_{D1}\\) and \\(R_{D2}\\)**: These are resistors connected to the drain of M1 and M2 respectively.\n3. **\\(R_F\\)**: This is a feedback resistor.\n4. **\\(V_{DD}\\)**: This is the supply voltage.\n5. **\\(V_b\\)**: This is the bias voltage applied to the gate of M2.\n6. **\\(I_{in}\\)**: This is the input current source.\n7. **\\(V_{out}\\)**: This is the output voltage.\n\n### Operation:\n1. **M1 Operation**:\n   - The input current \\(I_{in}\\) flows through \\(R_F\\), creating a voltage drop across \\(R_F\\).\n   - This voltage drop is applied to the gate of M1, controlling its operation.\n   - The drain current of M1 flows through \\(R_{D1}\\), creating a voltage drop across \\(R_{D1}\\).\n   - The voltage at node X is determined by the voltage drop across \\(R_{D1}\\).\n\n2. **M2 Operation**:\n   - The gate of M2 is biased by \\(V_b\\).\n   - The drain current of M2 flows through \\(R_{D2}\\), creating a voltage drop across \\(R_{D2}\\).\n   - The output voltage \\(V_{out}\\) is taken from the drain of M2.\n\n### Feedback:\n- The feedback resistor \\(R_F\\) connects the output \\(V_{out}\\) to the source of M1.\n- The feedback current \\(i_{RF}\\) flows through \\(R_F\\), affecting the gate-source voltage of M1.\n- This feedback mechanism stabilizes the operation of the amplifier and sets the gain.\n\n### Analysis:\n1. **Voltage at Node X**:\n   - The voltage at node X is given by:\n     \\[\n     V_X = V_{DD} - I_{D1} R_{D1}\n     \\]\n   - Where \\(I_{D1}\\) is the drain current of M1.\n\n2. **Output Voltage \\(V_{out}\\)**:\n   - The output voltage is given by:\n     \\[\n     V_{out} = V_{DD} - I_{D2} R_{D2}\n     \\]\n   - Where \\(I_{D2}\\) is the drain current of M2.\n\n3. **Feedback Current \\(i_{RF}\\)**:\n   - The feedback current is given by:\n     \\[\n     i_{RF} = \\frac{V_{out}}{R_F}\n     \\]\n\n4. **Gate-Source Voltage of M1**:\n   - The gate-source voltage of M1 is affected by the feedback current:\n     \\[\n     V_{GS1} = V_X - i_{RF} R_F\n     \\]\n\n### Summary:\n- The circuit is a common-source amplifier with active load and feedback.\n- The feedback resistor \\(R_F\\) stabilizes the operation and sets the gain.\n- The output voltage \\(V_{out}\\) is determined by the drain current of M2 and the resistor \\(R_{D2}\\).\n- The voltage at node X is determined by the drain current of M1 and the resistor \\(R_{D1}\\).\n- The feedback current \\(i_{RF}\\) affects the gate-source voltage of M1, stabilizing the operation of the amplifier.",
        "format": "markdown",
        "sha256": "deae2e9ef716dc461d320b57b4d1230032baa1164cd3ab9b616d5a09bc9e2150"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that RF feeds back from Vout to M1’s source, but misidentifies both gate connections and the stage roles: M1 is the common-gate input device with its gate at Vb, while M2 is driven by X. Its resulting signal-path and feedback equations are therefore incorrect.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 759,
        "total_tokens": 1539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 759,
        "total_tokens": 1539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a common-source amplifier with active load and feedback. Let's analyze the circuit step by step:\n\n### Components and Configuration:\n1. **Transistors \\( M_1 \\) and \\( M_2 \\)**: These are MOSFETs. \\( M_1 \\) is configured as a common-source amplifier, and \\( M_2 \\) is configured as a current source load.\n2. **Resistors \\( R_{D1} \\) and \\( R_{D2} \\)**: These resistors are connected to the drain of \\( M_1 \\) and \\( M_2 \\) respectively.\n3. **Feedback Resistor \\( R_F \\)**: This resistor provides feedback from the output \\( V_{out} \\) to the source of \\( M_1 \\).\n4. **Current Source \\( I_{in} \\)**: This provides the input current to the circuit.\n5. **Bias Voltage \\( V_b \\)**: This voltage biases the gate of \\( M_2 \\).\n\n### Operation:\n1. **Input Stage**:\n   - The input current \\( I_{in} \\) flows through \\( R_F \\), creating a voltage drop across \\( R_F \\).\n   - This voltage drop is applied to the source of \\( M_1 \\), which affects the gate-source voltage \\( V_{GS1} \\) of \\( M_1 \\).\n\n2. **Amplification**:\n   - \\( M_1 \\) operates as a common-source amplifier. The voltage at node \\( X \\) is given by:\n     \\[\n     V_X = V_{DD} - I_{D1} R_{D1}\n     \\]\n   - The drain current \\( I_{D1} \\) of \\( M_1 \\) is controlled by the gate-source voltage \\( V_{GS1} \\).\n\n3. **Active Load**:\n   - \\( M_2 \\) acts as an active load for \\( M_1 \\). The current through \\( M_2 \\) is controlled by the bias voltage \\( V_b \\).\n   - The voltage at the drain of \\( M_2 \\) (which is \\( V_{out} \\)) is given by:\n     \\[\n     V_{out} = V_{DD} - I_{D2} R_{D2}\n     \\]\n   - \\( I_{D2} \\) is the drain current of \\( M_2 \\), which is set by \\( V_b \\).\n\n4. **Feedback**:\n   - The feedback resistor \\( R_F \\) connects the output \\( V_{out} \\) to the source of \\( M_1 \\).\n   - This feedback stabilizes the operating point of \\( M_1 \\) and affects the overall gain of the amplifier.\n\n### Analysis:\n1. **Voltage at Node \\( X \\)**:\n   \\[\n   V_X = V_{DD} - I_{D1} R_{D1}\n   \\]\n   where \\( I_{D1} \\) is the drain current of \\( M_1 \\).\n\n2. **Output Voltage \\( V_{out} \\)**:\n   \\[\n   V_{out} = V_{DD} - I_{D2} R_{D2}\n   \\]\n   where \\( I_{D2} \\) is the drain current of \\( M_2 \\).\n\n3. **Feedback Voltage**:\n   \\[\n   V_{source} = V_{out} - I_{in} R_F\n   \\]\n   This voltage affects the gate-source voltage \\( V_{GS1} \\) of \\( M_1 \\).\n\n### Conclusion:\nThe circuit is a common-source amplifier with active load and feedback. The feedback resistor \\( R_F \\) stabilizes the operating point and affects the gain. The output voltage \\( V_{out} \\) is determined by the drain current of \\( M_2 \\) and the resistor \\( R_{D2} \\). The voltage at node \\( X \\) is determined by the drain current of \\( M_1 \\) and the resistor \\( R_{D1} \\).",
        "format": "markdown",
        "sha256": "84fb2188cede3f4844bb5717189e6f8b31f6ac4ba4dcd69150baf395d2ea5eeb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies that RF connects the output to M1’s source, but misidentifies both transistor roles and the circuit topology: M1 is common-gate and M2 is a common-source second stage, not an active load. Its feedback and voltage explanations therefore do not capture the transimpedance operation.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 849,
        "total_tokens": 1629,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 849,
        "total_tokens": 1629,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current mirror load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: NMOS transistor\n2. **M2**: PMOS transistor\n3. **I1**: Current source\n4. **Iin**: Input current source\n5. **Vb**: Bias voltage\n6. **VDD**: Supply voltage\n7. **Vout**: Output voltage\n\n### Operation:\n1. **Biasing of M1**:\n   - The NMOS transistor M1 is biased by the voltage \\( V_b \\). This sets the gate voltage of M1.\n   - The source of M1 is connected to ground, and the drain is connected to the drain of M2.\n\n2. **Current Mirror (M2 and I1)**:\n   - The PMOS transistor M2 and the current source \\( I_1 \\) form a current mirror.\n   - The current source \\( I_1 \\) sets the current through M2.\n   - The drain current of M2 is mirrored to the drain of M1.\n\n3. **Input Current \\( I_{in} \\)**:\n   - The input current \\( I_{in} \\) flows into the source of M1.\n   - This current modulates the drain current of M1.\n\n### Analysis:\n1. **DC Bias Point**:\n   - The bias voltage \\( V_b \\) sets the operating point of M1.\n   - The current source \\( I_1 \\) sets the current through M2, which in turn sets the current through M1.\n\n2. **Small Signal Analysis**:\n   - For small signal analysis, the input current \\( I_{in} \\) causes a small signal variation in the drain current of M1.\n   - The small signal drain current of M1 is mirrored by M2, causing a variation in \\( V_{out} \\).\n\n### Equations:\n1. **DC Analysis**:\n   - The drain current of M1 (\\( I_{D1} \\)) is set by the bias voltage \\( V_b \\) and the current mirror.\n   - \\( I_{D1} = I_1 \\)\n\n2. **Small Signal Analysis**:\n   - The small signal transconductance \\( g_m \\) of M1 is given by:\n     \\[\n     g_m = \\frac{2I_{D1}}{V_{GS1} - V_{th1}}\n     \\]\n   - The small signal output voltage \\( V_{out} \\) is given by:\n     \\[\n     V_{out} = -g_m \\cdot r_{o1} \\cdot I_{in}\n     \\]\n     where \\( r_{o1} \\) is the output resistance of M1.\n\n### Summary:\n- The circuit is a common-source amplifier with a current mirror load.\n- The bias voltage \\( V_b \\) sets the operating point of M1.\n- The current source \\( I_1 \\) sets the current through M2, which mirrors the current to M1.\n- The input current \\( I_{in} \\) modulates the drain current of M1, causing a variation in the output voltage \\( V_{out} \\).\n\nThis configuration provides high gain and good linearity, making it suitable for amplification purposes.",
        "format": "markdown",
        "sha256": "7c158c2f42ad9e8d3c047f5b40292c2ea70cb1841aeadf320f7e9226c9c89c0f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the circuit as a common-source amplifier with a current-mirror load, placing M1's source at ground and missing the common-gate input path and feedback from Vout through M2 to the input node. Its small-signal equation therefore does not describe this circuit.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 697,
        "total_tokens": 1477,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 697,
        "total_tokens": 1477,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current source load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: NMOS transistor\n2. **M2**: PMOS transistor\n3. **\\( V_{DD} \\)**: Supply voltage\n4. **\\( I_1 \\)**: Current source\n5. **\\( V_b \\)**: Bias voltage for M1\n6. **\\( I_{in} \\)**: Input current source\n7. **\\( V_{out} \\)**: Output voltage\n\n### Operation:\n1. **Biasing of M1**:\n   - The gate of M1 is connected to a bias voltage \\( V_b \\).\n   - The source of M1 is connected to ground.\n   - The drain of M1 is connected to the drain of M2 and the current source \\( I_1 \\).\n\n2. **Biasing of M2**:\n   - The gate of M2 is connected to its drain, forming a diode-connected PMOS transistor.\n   - The source of M2 is connected to \\( V_{DD} \\).\n\n### Analysis:\n1. **Current Source \\( I_1 \\)**:\n   - The current source \\( I_1 \\) sets the current through M2.\n   - Since M2 is diode-connected, it will have a voltage drop across it that depends on the current \\( I_1 \\) and the characteristics of the PMOS transistor.\n\n2. **Operation of M1**:\n   - The NMOS transistor M1 operates in the saturation region if \\( V_{DS1} \\) (drain-source voltage of M1) is greater than \\( V_{GS1} - V_{th1} \\) (gate-source voltage minus threshold voltage of M1).\n   - The current through M1 is controlled by the gate voltage \\( V_b \\) and the drain voltage \\( V_{out} \\).\n\n3. **Output Voltage \\( V_{out} \\)**:\n   - The output voltage \\( V_{out} \\) is taken at the drain of M1.\n   - \\( V_{out} \\) is influenced by the current through M1 and the voltage drop across M2.\n\n### Equations:\n1. **Current through M1**:\n   \\[\n   I_{D1} = \\frac{1}{2} k_n (V_{GS1} - V_{th1})^2\n   \\]\n   where \\( k_n \\) is the process transconductance parameter for the NMOS transistor.\n\n2. **Current through M2**:\n   \\[\n   I_{D2} = I_1\n   \\]\n   Since M2 is diode-connected, the current through M2 is equal to the current source \\( I_1 \\).\n\n3. **Output Voltage \\( V_{out} \\)**:\n   \\[\n   V_{out} = V_{DD} - V_{DS2}\n   \\]\n   where \\( V_{DS2} \\) is the drain-source voltage of M2.\n\n### Summary:\n- The circuit is a common-source amplifier with a current source load.\n- The output voltage \\( V_{out} \\) is determined by the current through M1 and the voltage drop across M2.\n- The bias voltage \\( V_b \\) sets the operating point of M1.\n- The current source \\( I_1 \\) sets the current through M2, which in turn influences the output voltage \\( V_{out} \\).\n\nThis configuration is commonly used in analog circuits to achieve high gain and good linearity.",
        "format": "markdown",
        "sha256": "6ca2495f77a51501f6bc453e96f23e9abb5e6183a6236ec2a705cf0e705f3bb4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the topology as a common-source amplifier with a diode-connected PMOS load. In the actual circuit, M1 is common-gate and M2 is driven by Vout to feed current back to the input; it misses the feedback loop and the low input resistance.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 747,
        "total_tokens": 1527,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 747,
        "total_tokens": 1527,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a common-source amplifier with a current source load. Let's analyze the circuit step by step:\n\n### Components:\n1. **M1**: NMOS transistor\n2. **M2**: PMOS transistor\n3. **\\( V_{DD} \\)**: Supply voltage\n4. **\\( I_1 \\)**: Current source\n5. **\\( V_b \\)**: Bias voltage for M1\n6. **\\( I_{in} \\)**: Input current source\n7. **\\( V_{out} \\)**: Output voltage\n\n### Operation:\n1. **Biasing of M1**:\n   - The gate of M1 is connected to a bias voltage \\( V_b \\).\n   - The source of M1 is connected to ground.\n   - The drain of M1 is connected to the drain of M2 and the current source \\( I_1 \\).\n\n2. **Biasing of M2**:\n   - The gate of M2 is connected to its drain, forming a diode-connected PMOS transistor.\n   - The source of M2 is connected to \\( V_{DD} \\).\n\n### Analysis:\n1. **Current Source \\( I_1 \\)**:\n   - The current source \\( I_1 \\) sets the current through M2.\n   - Since M2 is diode-connected, the current \\( I_1 \\) will also flow through M1.\n\n2. **Operation of M1**:\n   - M1 operates in the saturation region if \\( V_{DS1} \\) (drain-source voltage of M1) is greater than \\( V_{GS1} - V_{th1} \\) (gate-source voltage minus threshold voltage of M1).\n   - The current through M1 is determined by the bias voltage \\( V_b \\) and the characteristics of the transistor.\n\n3. **Output Voltage \\( V_{out} \\)**:\n   - The output voltage \\( V_{out} \\) is taken from the drain of M1.\n   - \\( V_{out} \\) is influenced by the current \\( I_1 \\) and the resistance of M1 in the saturation region.\n\n### Key Equations:\n1. **Current through M1**:\n   \\[\n   I_{D1} = \\frac{1}{2} k_n (V_{GS1} - V_{th1})^2\n   \\]\n   where \\( k_n \\) is the process transconductance parameter, \\( V_{GS1} \\) is the gate-source voltage of M1, and \\( V_{th1} \\) is the threshold voltage of M1.\n\n2. **Current through M2**:\n   \\[\n   I_{D2} = I_1\n   \\]\n   Since M2 is diode-connected, the current through M2 is equal to the current source \\( I_1 \\).\n\n3. **Output Voltage \\( V_{out} \\)**:\n   \\[\n   V_{out} = V_{DD} - V_{DS2}\n   \\]\n   where \\( V_{DS2} \\) is the drain-source voltage of M2.\n\n### Summary:\n- The circuit is a common-source amplifier with a current source load.\n- The current source \\( I_1 \\) sets the current through the diode-connected PMOS transistor M2.\n- The NMOS transistor M1 is biased by \\( V_b \\) and operates in the saturation region.\n- The output voltage \\( V_{out} \\) is determined by the current through M1 and the characteristics of the transistors.\n\nThis configuration is commonly used in analog circuits to achieve high gain and good linearity.",
        "format": "markdown",
        "sha256": "f3d4647ab9ab3afe8951aaecea0403805b1e12767b6f19e016c188285bdfd5e8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the topology as a common-source amplifier with a diode-connected PMOS load. In the actual circuit, M1 is common-gate with its source at the input node, and M2 is driven by Vout to feed back current to that node. It misses the defining feedback loop and low-input-resistance behavior.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 759,
        "total_tokens": 1539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 780,
        "output_tokens": 759,
        "total_tokens": 1539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a ring oscillator, which typically consists of an odd number of inverters connected in a loop. The capacitors \\( C_L \\) are load capacitors that affect the oscillation frequency.\n\nIf the capacitors \\( C_L \\) become arbitrarily large, the circuit will still oscillate, but the frequency of oscillation will decrease. This is because the capacitors will take longer to charge and discharge, increasing the delay through each inverter stage. The oscillation frequency \\( f \\) of a ring oscillator is inversely proportional to the total delay \\( T \\) of the loop:\n\n\\[ f = \\frac{1}{T} \\]\n\nwhere \\( T \\) is the sum of the delays of all the inverter stages. As the capacitors increase in size, the delay \\( T \\) increases, causing the frequency \\( f \\) to decrease.\n\nIn summary, the circuit will not fail to oscillate if the capacitors become arbitrarily large, but the oscillation frequency will become very low.",
        "format": "markdown",
        "sha256": "330cbbf330707c24d965e60d70b8b5f057e1974a947fecaa2b563a7db0804504"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that loading all three nodes preserves oscillation while increasing capacitance slows the transitions and lowers the frequency. The delay-based justification satisfies the full-credit rule; the simplified frequency relation does not affect the conclusion.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1472,
        "output_tokens": 207,
        "total_tokens": 1679,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1472,
        "output_tokens": 207,
        "total_tokens": 1679,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a ring oscillator, which consists of an odd number of inverters connected in a loop. The capacitors \\( C_L \\) represent the load capacitance at each stage.\n\nIn a ring oscillator, the oscillation frequency is determined by the propagation delay of each inverter stage and the load capacitance. The propagation delay \\( t_d \\) of each inverter is influenced by the load capacitance \\( C_L \\) and the drive strength of the inverter.\n\nIf the load capacitance \\( C_L \\) becomes arbitrarily large, the propagation delay of each inverter will increase significantly. This is because a larger capacitance takes more time to charge and discharge, thus slowing down the transition between logic states.\n\nWhile the circuit will still oscillate, the frequency of oscillation will decrease as the load capacitance increases. In the extreme case where the capacitance is very large, the propagation delay could become so long that the oscillation frequency becomes very low, potentially approaching zero. However, the circuit will not fail to oscillate entirely; it will just oscillate at a very low frequency.\n\nTherefore, the circuit does not fail to oscillate if the three capacitors become arbitrarily large, but the oscillation frequency will decrease significantly.",
        "format": "markdown",
        "sha256": "0b94d257356a6b551e8915a1bde20c7b2e22e15179fd43db52812dab0d1bd9ea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal capacitors at all three nodes do not stop oscillation and explains that increased load capacitance slows each stage, lowering the frequency.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1472,
        "output_tokens": 250,
        "total_tokens": 1722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1472,
        "output_tokens": 250,
        "total_tokens": 1722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a ring oscillator, which consists of an odd number of inverters connected in a loop. The capacitors \\( C_L \\) represent the load capacitance at each stage.\n\nIn a ring oscillator, the oscillation frequency is determined by the propagation delay of each inverter stage and the load capacitance. The propagation delay \\( t_d \\) of each inverter is influenced by the load capacitance \\( C_L \\) and the drive strength of the inverter.\n\nIf the load capacitance \\( C_L \\) becomes arbitrarily large, the propagation delay of each inverter will increase significantly. This is because a larger capacitance takes more time to charge and discharge, thus slowing down the transition between logic states.\n\nWhile the circuit will still oscillate, the frequency of oscillation will decrease as the load capacitance increases. In the extreme case where the capacitance is very large, the propagation delay could become so long that the oscillation frequency becomes very low, potentially approaching zero. However, the circuit will not fail to oscillate entirely; it will just oscillate at a very low frequency.\n\nTherefore, the circuit does not fail to oscillate if the three capacitors become arbitrarily large, but the oscillation frequency will decrease significantly.",
        "format": "markdown",
        "sha256": "0b94d257356a6b551e8915a1bde20c7b2e22e15179fd43db52812dab0d1bd9ea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal capacitors at all three nodes do not stop oscillation and explains that increased load capacitance slows each stage, lowering the frequency.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1472,
        "output_tokens": 250,
        "total_tokens": 1722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1472,
        "output_tokens": 250,
        "total_tokens": 1722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a ring oscillator, which consists of an odd number of inverters connected in a loop. The capacitors \\( C_L \\) are load capacitors connected to each inverter stage.\n\nPhase noise in oscillators is influenced by several factors, including the load capacitance. If the load capacitance \\( C_L \\) is doubled, the following effects on phase noise can be expected:\n\n1. **Frequency Decrease**: The oscillation frequency of the ring oscillator is inversely proportional to the load capacitance. Doubling the capacitance will decrease the oscillation frequency. Since phase noise is typically measured relative to the carrier frequency, a lower frequency can result in higher phase noise at a given offset frequency.\n\n2. **Increased Phase Noise**: Phase noise is generally proportional to the square of the load capacitance. Doubling the capacitance will increase the phase noise. This is because larger capacitance results in slower switching times for the inverters, which increases the timing jitter and thus the phase noise.\n\nIn summary, doubling the three capacitors \\( C_L \\) in the ring oscillator will increase the phase noise due to the decrease in oscillation frequency and the increased timing jitter.",
        "format": "markdown",
        "sha256": "3e5cf509c8801d17dae2ac2d4961f5abc33854c214acefbb2b6268b03681e90c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that doubling the load capacitors lowers the oscillation frequency, but incorrectly concludes that phase noise increases. The expected result at a fixed offset is about a fourfold decrease (6 dB).",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1469,
        "output_tokens": 245,
        "total_tokens": 1714,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1469,
        "output_tokens": 245,
        "total_tokens": 1714,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a ring oscillator, which is commonly used in various applications including clock generation and signal processing. The capacitors \\( C_L \\) are load capacitors connected to each stage of the oscillator.\n\nPhase noise in a ring oscillator is influenced by several factors, including the load capacitance. If the load capacitance \\( C_L \\) is doubled, the following effects on phase noise can be expected:\n\n1. **Frequency Decrease**: Doubling the load capacitance will increase the time constant of each stage, thereby decreasing the oscillation frequency. Since phase noise is inversely proportional to the oscillation frequency, a lower frequency generally results in higher phase noise.\n\n2. **Increased Phase Noise**: The phase noise of a ring oscillator is inversely proportional to the square of the oscillation frequency. Therefore, if the frequency decreases due to increased capacitance, the phase noise will increase.\n\n3. **Noise Filtering**: Larger capacitors can filter out high-frequency noise components more effectively, but this is generally outweighed by the increase in phase noise due to the lower oscillation frequency.\n\nIn summary, doubling the capacitors \\( C_L \\) in the ring oscillator will result in a decrease in oscillation frequency and an increase in phase noise.",
        "format": "markdown",
        "sha256": "94e5422fad3653704fbe8b5b11243189f23a2ac2c26b36999f21fafdbc759c3a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies the ring oscillator and predicts that doubling the capacitors lowers the oscillation frequency, but it gives the opposite phase-noise trend. At a fixed offset frequency, phase noise decreases by about a factor of four, rather than increasing.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1469,
        "output_tokens": 258,
        "total_tokens": 1727,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1469,
        "output_tokens": 258,
        "total_tokens": 1727,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a ring oscillator, which is commonly used in various applications including clock generation and signal processing. The capacitors \\( C_L \\) are load capacitors connected to each stage of the oscillator.\n\nPhase noise in a ring oscillator is influenced by several factors, including the load capacitance. If the load capacitance \\( C_L \\) is doubled, the following effects can be expected:\n\n1. **Frequency Decrease**: The oscillation frequency of a ring oscillator is inversely proportional to the load capacitance. Doubling the capacitance will decrease the oscillation frequency. Since phase noise is often measured relative to the carrier frequency, a lower frequency can result in different phase noise characteristics.\n\n2. **Phase Noise Increase**: Generally, increasing the load capacitance increases the phase noise. This is because the increased capacitance results in slower transitions between logic states, which can introduce more jitter and noise into the system. The slower transitions mean that the oscillator is more susceptible to noise sources, leading to higher phase noise.\n\n3. **Power Consumption**: Doubling the capacitance will also increase the power consumption of the oscillator, as more energy is required to charge and discharge the capacitors during each oscillation cycle.\n\nIn summary, doubling the capacitors \\( C_L \\) in the ring oscillator will likely increase the phase noise due to slower transitions and increased susceptibility to noise sources. Additionally, the oscillation frequency will decrease, and power consumption will increase.",
        "format": "markdown",
        "sha256": "1826ee9785efbebe926bb0916a25142208b10842d225e43ff4d16c4f044297bc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies that doubling the load capacitance lowers the oscillation frequency, but its central claim that phase noise increases contradicts the expected roughly fourfold decrease at a fixed offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1469,
        "output_tokens": 298,
        "total_tokens": 1767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1469,
        "output_tokens": 298,
        "total_tokens": 1767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit in the figure will fail to oscillate if \\( C_L \\) becomes arbitrarily large.\n\nThe circuit shown is a ring oscillator composed of an odd number of inverters. The oscillation frequency of a ring oscillator is determined by the propagation delay of the inverters and the load capacitance \\( C_L \\). If \\( C_L \\) becomes very large, the propagation delay of the inverters will increase significantly because the inverters will take longer to charge and discharge the large capacitance.\n\nAs \\( C_L \\) increases, the delay increases, and the oscillation frequency decreases. If \\( C_L \\) becomes arbitrarily large, the delay can become so long that the circuit will effectively stop oscillating, as the inverters will not be able to switch states quickly enough to sustain the oscillation. Therefore, the circuit will fail to oscillate if \\( C_L \\) becomes arbitrarily large.",
        "format": "markdown",
        "sha256": "e441a0630557d91bda9becb5fc42b3bc3c52372bb99dcaedcfad07acd804177f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It reaches the correct yes conclusion and notes that the load slows the stage, but does not explain the key effect: the one-node dominant pole causes loop gain/phase to fail the Barkhausen condition. Increased delay alone does not establish why oscillation ceases.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1469,
        "output_tokens": 187,
        "total_tokens": 1656,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1469,
        "output_tokens": 187,
        "total_tokens": 1656,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit in the figure will fail to oscillate if \\( C_L \\) becomes arbitrarily large.\n\nThe circuit shown is a ring oscillator composed of an odd number of inverters. The oscillation frequency of a ring oscillator is determined by the propagation delay of each inverter stage and the total number of stages. The capacitor \\( C_L \\) adds additional load to one of the inverter stages, increasing its propagation delay.\n\nIf \\( C_L \\) becomes arbitrarily large, the propagation delay of the inverter stage connected to \\( C_L \\) will increase significantly. This increased delay can slow down the overall oscillation frequency of the ring oscillator. If the delay becomes too large, it can reach a point where the circuit no longer meets the timing requirements for oscillation, causing the circuit to fail to oscillate.",
        "format": "markdown",
        "sha256": "e6db2b79eb6310d50f499f6872aace96a7e51d77bc63f88e19324aeddad13782"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The yes conclusion and increased delay from loading one inverter are correct, but the explanation misses the key failure mechanism: the dominant pole causes enough loop gain/phase roll-off to violate the oscillation condition. Saying the delay exceeds generic “timing requirements” is incomplete.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1469,
        "output_tokens": 165,
        "total_tokens": 1634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1469,
        "output_tokens": 165,
        "total_tokens": 1634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit in the figure will fail to oscillate if \\( C_L \\) becomes arbitrarily large.\n\nThe circuit shown is a ring oscillator composed of an odd number of inverters. The oscillation frequency of a ring oscillator is determined by the propagation delay of each inverter stage and the total number of stages. The capacitor \\( C_L \\) adds additional load to one of the inverter stages, increasing its propagation delay.\n\nIf \\( C_L \\) becomes arbitrarily large, the propagation delay of the inverter stage connected to \\( C_L \\) will increase significantly. This increased delay can slow down the overall oscillation frequency of the ring oscillator. If the delay becomes too large, it can reach a point where the circuit no longer oscillates because the signal cannot propagate through the entire loop within a reasonable time frame, effectively causing the circuit to stop oscillating.",
        "format": "markdown",
        "sha256": "97fd814f50c8ae4780e8de1503cde2b35f421de2a0c60f18440beea80bac6f2f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The yes conclusion and increased loading delay are relevant, but the answer does not explain the dominant-pole or loop gain/phase failure that stops oscillation. Saying the signal cannot propagate within a “reasonable time” conflates slower oscillation with failure to satisfy the loop condition.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1469,
        "output_tokens": 174,
        "total_tokens": 1643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1469,
        "output_tokens": 174,
        "total_tokens": 1643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths of the NMOS and PMOS devices in the circuit will generally reduce the phase noise. This is because increasing the width of the transistors decreases their channel resistance, which in turn reduces the thermal noise generated by the transistors. Additionally, wider transistors have higher transconductance (\\(g_m\\)), which improves the signal-to-noise ratio and further reduces phase noise.\n\nHowever, it's important to note that while increasing the transistor widths can reduce phase noise, it also increases the capacitance, which can affect the overall performance of the circuit, including its speed and power consumption. Therefore, the design must balance these factors to achieve the desired performance.",
        "format": "markdown",
        "sha256": "443d82591ae4a6716812807c7c11151c56eeb298ccb71dbfaab0295bd98cac1a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct direction but omits the approximately 3 dB reduction. Its explanation is misleading: widening devices increases their noise current rather than reducing it; the improvement comes from signal and noise scaling differently.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 135,
        "total_tokens": 1271,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 135,
        "total_tokens": 1271,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths of the NMOS and PMOS devices in the circuit will generally reduce the phase noise. This is because increasing the transistor widths reduces the thermal noise and flicker noise generated by the transistors. \n\nHere’s a more detailed explanation:\n\n1. **Thermal Noise**: The thermal noise in MOSFETs is inversely proportional to the width of the transistor. By doubling the width, the thermal noise power is halved, which contributes to lower phase noise.\n\n2. **Flicker Noise (1/f noise)**: Flicker noise is also inversely proportional to the area of the transistor. Doubling the width increases the area, thereby reducing the flicker noise.\n\n3. **Transconductance (gm)**: Increasing the width of the transistors increases their transconductance (gm). Higher transconductance improves the signal-to-noise ratio, which helps in reducing phase noise.\n\nTherefore, doubling the widths of the NMOS and PMOS devices in the circuit will lead to a reduction in phase noise, improving the overall performance of the circuit.",
        "format": "markdown",
        "sha256": "91738aed0483c6c7e5866cacfae9f375c99ec643f3e31f05f6953495a27771a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gets the direction right, but gives no magnitude and incorrectly claims wider devices reduce thermal-noise power. The expected reduction is about 3 dB; device noise current power actually doubles, while the signal scales more strongly.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 218,
        "total_tokens": 1354,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 218,
        "total_tokens": 1354,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths of the NMOS and PMOS devices in the circuit will generally reduce the phase noise. This is because increasing the transistor widths reduces the thermal noise and flicker noise generated by the transistors. \n\nHere’s a more detailed explanation:\n\n1. **Thermal Noise**: The thermal noise in MOSFETs is inversely proportional to the width of the transistor. By doubling the width, the thermal noise power is halved, which contributes to lower phase noise.\n\n2. **Flicker Noise (1/f noise)**: Flicker noise is also inversely proportional to the area of the transistor. Doubling the width increases the area, thereby reducing the flicker noise.\n\n3. **Transconductance (gm)**: Increasing the width of the transistors increases their transconductance (gm). Higher transconductance improves the signal-to-noise ratio, which helps in reducing phase noise.\n\nTherefore, doubling the widths of the NMOS and PMOS devices in the circuit will lead to a reduction in phase noise, improving the overall performance of the circuit.",
        "format": "markdown",
        "sha256": "91738aed0483c6c7e5866cacfae9f375c99ec643f3e31f05f6953495a27771a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gets the direction right, but gives no magnitude and incorrectly claims wider devices reduce thermal-noise power. The expected reduction is about 3 dB; device noise current power actually doubles, while the signal scales more strongly.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 218,
        "total_tokens": 1354,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 218,
        "total_tokens": 1354,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance seen looking into the supply node of the ring oscillator, we need to analyze the circuit considering the small-signal model of the inverters.\n\nA ring oscillator typically consists of an odd number of inverters connected in a loop. In this case, we have three inverters. Each inverter can be modeled as a combination of a pull-up and pull-down network, which are usually implemented using MOSFETs.\n\nFor simplicity, let's assume each inverter can be modeled as a resistor \\( R \\) when considering small-signal analysis. This resistor represents the equivalent resistance of the pull-up and pull-down networks in the inverter.\n\nSince the inverters are connected in parallel at the supply node, the small-signal resistance seen looking into the supply node \\( R_X \\) can be calculated using the parallel resistance formula. If each inverter has an equivalent small-signal resistance \\( R \\), and there are \\( N \\) inverters connected in parallel, the total small-signal resistance \\( R_X \\) is given by:\n\n\\[ \\frac{1}{R_X} = \\frac{1}{R} + \\frac{1}{R} + \\frac{1}{R} \\]\n\nFor \\( N = 3 \\) inverters:\n\n\\[ \\frac{1}{R_X} = \\frac{1}{R} + \\frac{1}{R} + \\frac{1}{R} = \\frac{3}{R} \\]\n\nTherefore, the small-signal resistance \\( R_X \\) is:\n\n\\[ R_X = \\frac{R}{3} \\]\n\nSo, the small-signal resistance seen looking into the supply node of the ring oscillator is \\( \\frac{R}{3} \\), where \\( R \\) is the equivalent small-signal resistance of each inverter.",
        "format": "markdown",
        "sha256": "39e1f036e3fe8ebbedb4e2348c7aad3079e73d87f1136d4e2b5403e26eddced1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the three inverter stages but treats them as fixed resistors in parallel, missing the oscillation-driven charging and discharging of the load capacitances that sets the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1132,
        "output_tokens": 371,
        "total_tokens": 1503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1132,
        "output_tokens": 371,
        "total_tokens": 1503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance seen looking into the supply node of the ring oscillator, we need to analyze the circuit considering the small-signal model of the inverters.\n\nA ring oscillator typically consists of an odd number of inverters connected in a loop. In this case, we have three inverters. Each inverter can be modeled as a combination of a pull-up network (usually a PMOS transistor) and a pull-down network (usually an NMOS transistor).\n\nFor small-signal analysis, we consider the small-signal resistances of the transistors. Let's denote the small-signal resistance of the PMOS transistor as \\( r_{p} \\) and the small-signal resistance of the NMOS transistor as \\( r_{n} \\).\n\nIn a ring oscillator, the inverters switch states periodically, and the supply node sees the combined effect of the pull-up and pull-down networks of all the inverters. Since the inverters are identical and switch states simultaneously, the small-signal resistance seen at the supply node is the parallel combination of the resistances of the pull-up and pull-down networks of each inverter.\n\nFor one inverter, the small-signal resistance looking into the supply node is the parallel combination of \\( r_{p} \\) and \\( r_{n} \\):\n\n\\[ r_{inv} = \\frac{r_{p} \\cdot r_{n}}{r_{p} + r_{n}} \\]\n\nSince there are three inverters connected in parallel, the total small-signal resistance \\( R_x \\) seen looking into the supply node is:\n\n\\[ R_x = \\frac{r_{inv}}{3} = \\frac{1}{3} \\cdot \\frac{r_{p} \\cdot r_{n}}{r_{p} + r_{n}} \\]\n\nTherefore, the small-signal resistance seen looking into the supply node of the ring oscillator is:\n\n\\[ R_x = \\frac{1}{3} \\cdot \\frac{r_{p} \\cdot r_{n}}{r_{p} + r_{n}} \\]\n\nThis expression gives the small-signal resistance in terms of the small-signal resistances of the PMOS and NMOS transistors in each inverter.",
        "format": "markdown",
        "sha256": "696c64f9659e5ba2ffad53f125860e38dc405006b8185d6b32703e5906a74a60"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the three CMOS inverter stages but uses an invalid static parallel-resistance model and misses the dominant supply current from charging and discharging the load capacitances, which depends on oscillation frequency.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1132,
        "output_tokens": 462,
        "total_tokens": 1594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1132,
        "output_tokens": 462,
        "total_tokens": 1594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance seen looking into the supply node of the ring oscillator, we need to analyze the circuit considering the small-signal model of the inverters.\n\nA ring oscillator typically consists of an odd number of inverters connected in a loop. In this case, we have three inverters. Each inverter can be modeled as a combination of a pull-up network (usually a PMOS transistor) and a pull-down network (usually an NMOS transistor).\n\nFor small-signal analysis, we consider the small-signal resistances of the transistors. Let's denote the small-signal resistance of the PMOS transistor as \\( r_{p} \\) and the small-signal resistance of the NMOS transistor as \\( r_{n} \\).\n\n### Small-Signal Model of an Inverter\nIn the small-signal model, the inverter can be represented as a resistor \\( r_{inv} \\) which is the parallel combination of \\( r_{p} \\) and \\( r_{n} \\):\n\\[ r_{inv} = \\frac{r_{p} \\cdot r_{n}}{r_{p} + r_{n}} \\]\n\n### Small-Signal Resistance at the Supply Node\nThe supply node is connected to the pull-up networks of all three inverters. Since the inverters are identical and connected in parallel at the supply node, the equivalent small-signal resistance \\( R_{eq} \\) seen looking into the supply node is the parallel combination of the small-signal resistances of the pull-up networks of the three inverters.\n\nIf \\( r_{p} \\) is the small-signal resistance of the PMOS transistor in each inverter, then the equivalent resistance \\( R_{eq} \\) is:\n\\[ R_{eq} = \\frac{r_{p}}{3} \\]\n\n### Conclusion\nThe small-signal resistance seen looking into the supply node of the ring oscillator is \\( \\frac{r_{p}}{3} \\), where \\( r_{p} \\) is the small-signal resistance of the PMOS transistor in each inverter.",
        "format": "markdown",
        "sha256": "1756944d01d8a557672532524c0a22ce71596542070b35920a6c429b599050bf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the three inverter stages and their PMOS pull-ups, but misses the dominant oscillation-driven charging and discharging of the node capacitances. The unsupported static parallel-resistance model gives the wrong result instead of the switched-capacitor form, approximately 1/(3f0CL).",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1132,
        "output_tokens": 428,
        "total_tokens": 1560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1132,
        "output_tokens": 428,
        "total_tokens": 1560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the answer changes if the circuit oscillates.\n\nThe initial computation of \\( R_X \\) assumes that each inverter behaves as two diode-connected devices in series, which is valid in a static or non-oscillating condition. In this case, the small-signal resistance seen looking into the supply node is given by:\n\n\\[ R_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right) \\]\n\nHowever, when the circuit oscillates, the inverters are switching between their high and low states. This dynamic behavior affects the small-signal resistance seen at the supply node. During oscillation, the transconductances \\( g_{mn} \\) and \\( g_{mp} \\) are not constant and vary with the switching activity. The effective resistance seen at the supply node will be influenced by the time-varying nature of the transconductances and the switching characteristics of the inverters.\n\nTherefore, the small-signal resistance \\( R_X \\) seen looking into the supply node during oscillation will be different from the static case and will depend on the oscillation frequency and the dynamic behavior of the inverters. The exact value would require a more detailed analysis considering the time-varying properties of the transconductances and the switching dynamics of the ring oscillator.",
        "format": "markdown",
        "sha256": "6d2e7d70cedf1ae236f6c5952c286cbf83e0af781319d5c10aeb5f678fc55e9e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It says oscillation changes the resistance but attributes this vaguely to time-varying transconductance and does not identify capacitive charging as the mechanism or establish that the resistance remains on the order of the static estimate.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1212,
        "output_tokens": 280,
        "total_tokens": 1492,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1212,
        "output_tokens": 280,
        "total_tokens": 1492,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the answer changes if the circuit oscillates.\n\nWhen the ring oscillator is oscillating, the inverters are switching between their high and low states. This dynamic behavior affects the small-signal resistance seen looking into the supply node. The original calculation of \\( R_X \\) assumes a static condition where each inverter behaves as two diode-connected devices in series, which is not the case during oscillation.\n\nDuring oscillation, the transistors are not in a steady state but are continuously switching. This means that the effective resistance seen at the supply node will be influenced by the switching activity and the time-varying currents through the transistors. The small-signal resistance \\( R_X \\) in the oscillating state would be different and typically lower than the static case due to the dynamic behavior of the transistors.\n\nTherefore, the original expression \\( R_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right) \\) does not hold true when the circuit is oscillating. The actual small-signal resistance in the oscillating state would require a more complex analysis that takes into account the time-varying nature of the currents and voltages in the circuit.",
        "format": "markdown",
        "sha256": "e05738c06cf366cfe25e8739f896a3e9cbd1ceaf2c7a136f8142028e57cec0b2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that oscillation invalidates the static calculation, but gives no capacitive charging argument and incorrectly claims the resistance is typically lower. The key result is that it remains on the order of the MOS on-resistance, not much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1212,
        "output_tokens": 256,
        "total_tokens": 1468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1212,
        "output_tokens": 256,
        "total_tokens": 1468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the answer changes if the circuit oscillates.\n\nWhen the ring oscillator is oscillating, the inverters are switching between their high and low states. This dynamic behavior affects the small-signal resistance seen looking into the supply node. The original calculation of \\( R_X \\) assumes a static condition where each inverter behaves as two diode-connected devices in series, which is not the case during oscillation.\n\nDuring oscillation, the transistors are not in a steady state but are continuously switching. This means that the effective resistance seen at the supply node will be influenced by the switching activity and the time-varying currents through the transistors. The small-signal resistance \\( R_X \\) in the oscillating state would be different and typically lower than the static case due to the dynamic behavior of the transistors.\n\nTherefore, the original expression \\( R_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right) \\) does not hold true when the circuit is oscillating. The actual small-signal resistance in the oscillating state would require a more complex analysis that takes into account the time-varying nature of the currents and voltages in the circuit.",
        "format": "markdown",
        "sha256": "e05738c06cf366cfe25e8739f896a3e9cbd1ceaf2c7a136f8142028e57cec0b2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that oscillation invalidates the static calculation, but gives no capacitive charging argument and incorrectly claims the resistance is typically lower. The key result is that it remains on the order of the MOS on-resistance, not much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1212,
        "output_tokens": 256,
        "total_tokens": 1468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1212,
        "output_tokens": 256,
        "total_tokens": 1468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit, M7 is the tail current source transistor for the differential pair formed by M1 and M2. The width of M7 affects the current it can source, which in turn affects the transconductance (\\(g_m\\)) of M1 and M2.\n\nAs the width of M7 increases, its ability to source current increases, assuming the gate voltage remains constant. This increase in current through M1 and M2 leads to an increase in their transconductance (\\(g_m\\)), since \\(g_m\\) is proportional to the square root of the drain current (\\(I_D\\)) in MOSFETs.\n\nThe voltage gain (\\(A_v\\)) of the differential pair can be approximated as:\n\n\\[ A_v \\approx g_m \\cdot R_{out} \\]\n\nwhere \\(R_{out}\\) is the output resistance seen at the drains of M1 and M2.\n\nSince \\(g_m\\) increases with the increase in current sourced by M7, the initial voltage gain of the circuit will increase as the width of M7 increases.",
        "format": "markdown",
        "sha256": "c0599f784bb4c444a4132d2dd9575061995471c8c01137700c9cea6c6b45c267"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M7 as the tail device and notes that a wider M7 increases current and input-pair transconductance, but it concludes that initial gain increases. It misses that the initial gain scales roughly with gm/ICM, which decreases as tail current rises.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1135,
        "output_tokens": 224,
        "total_tokens": 1359,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1135,
        "output_tokens": 224,
        "total_tokens": 1359,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit, M7 is the tail current source transistor for the differential pair formed by M1 and M2. The width of M7 affects the current it can source, which in turn affects the transconductance (\\(g_m\\)) of M1 and M2.\n\nAs the width of M7 increases, the current through M7 increases, assuming the gate voltage remains constant. This increased current results in higher \\(g_m\\) for M1 and M2, since \\(g_m\\) is proportional to the square root of the drain current (\\(I_D\\)):\n\n\\[ g_m = \\sqrt{2 \\cdot K_n \\cdot I_D} \\]\n\nwhere \\(K_n\\) is a process-dependent constant.\n\nThe voltage gain (\\(A_v\\)) of the differential pair is given by:\n\n\\[ A_v = g_m \\cdot R_{out} \\]\n\nwhere \\(R_{out}\\) is the output resistance seen at the drains of M1 and M2.\n\nTherefore, as the width of M7 increases, the current through M7 increases, leading to an increase in \\(g_m\\) for M1 and M2, which in turn increases the initial voltage gain of the circuit.",
        "format": "markdown",
        "sha256": "1439cecaee007caca68dfbbcdbb16257da48a58cae162cb0e80a7fa3051ee1aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M7 as the tail device and notes that a wider M7 can increase current and input-pair gm, but it concludes that initial gain increases. The initial gain instead decreases because it scales roughly with gm/ICM, and current grows faster than the relevant gain factor.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1135,
        "output_tokens": 254,
        "total_tokens": 1389,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1135,
        "output_tokens": 254,
        "total_tokens": 1389,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit, M7 is the tail current source transistor for the differential pair formed by M1 and M2. The width of M7 affects the current it can source, which in turn affects the transconductance (\\(g_m\\)) of M1 and M2.\n\nAs the width of M7 increases, the current through M7 increases, assuming the gate voltage remains constant. This increased current results in a higher transconductance (\\(g_m\\)) for M1 and M2, since \\(g_m\\) is proportional to the square root of the drain current (\\(I_D\\)):\n\n\\[ g_m = \\sqrt{2 \\cdot K_n \\cdot I_D} \\]\n\nwhere \\(K_n\\) is a process-dependent constant.\n\nThe voltage gain (\\(A_v\\)) of the differential pair is given by:\n\n\\[ A_v = g_m \\cdot R_D \\]\n\nwhere \\(R_D\\) is the load resistance seen by the differential pair (in this case, the resistance looking into the drains of M3 and M4).\n\nTherefore, as the width of M7 increases, the transconductance \\(g_m\\) of M1 and M2 increases, leading to an increase in the initial voltage gain of the circuit.",
        "format": "markdown",
        "sha256": "9d795ac25678613528fb4776cb3a0dbde61bfe5efe8df924b93a5070b1f9794c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that a wider M7 increases tail current and pair transconductance, but concludes that initial gain increases. It misses that the relevant gain factor falls as current grows, so the central trend is wrong.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1135,
        "output_tokens": 262,
        "total_tokens": 1397,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1135,
        "output_tokens": 262,
        "total_tokens": 1397,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit, increasing the capacitance at nodes P and Q will affect the initial voltage gain. Specifically, increasing the capacitance at these nodes will result in a decrease in the initial voltage gain. \n\nThis is because the capacitance at nodes P and Q forms a part of the load capacitance seen by the transistors M1 and M2. When the capacitance increases, the impedance at these nodes decreases, which in turn reduces the overall gain of the circuit. The voltage gain of a transistor stage is inversely proportional to the load capacitance, so an increase in capacitance leads to a reduction in gain.",
        "format": "markdown",
        "sha256": "f8623122d57b614e99c0e5cd98a0c85f73b08c0d5b07b57d2bbbcfc94f3c680a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives the opposite of the correct result: increasing capacitance slows the transient but leaves the initial gain approximately unchanged. It confuses capacitive loading and reduced bandwidth with a reduction in initial gain.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1135,
        "output_tokens": 126,
        "total_tokens": 1261,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1135,
        "output_tokens": 126,
        "total_tokens": 1261,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit, increasing the capacitance at nodes P and Q will affect the initial voltage gain. The nodes P and Q are part of the differential pair formed by transistors M1 and M2. The capacitance at these nodes influences the frequency response of the circuit.\n\nWhen the capacitance at nodes P and Q is increased, the following effects can be observed:\n\n1. **Lower Bandwidth**: The increased capacitance will lower the bandwidth of the circuit. This is because the increased capacitance will form a low-pass filter with the resistance seen at these nodes, reducing the high-frequency response.\n\n2. **Initial Voltage Gain**: The initial voltage gain of the circuit is primarily determined by the transconductance of the transistors and the load resistance. However, the increased capacitance will cause a slower response to changes in the input signal, which can effectively reduce the initial voltage gain at higher frequencies. At low frequencies, the initial voltage gain might not be significantly affected, but at higher frequencies, the gain will drop off more quickly due to the increased capacitance.\n\nIn summary, increasing the capacitance at nodes P and Q will reduce the initial voltage gain at higher frequencies, effectively lowering the overall bandwidth of the circuit.",
        "format": "markdown",
        "sha256": "ed87a6e3560414b8c02482842799b0cdd14928d7bf3c5698e56dff53c1d14a92"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misses the central result: increasing capacitance leaves the initial voltage gain essentially unchanged because the longer amplification interval cancels the slower node-voltage change. It discusses the real bandwidth and transient-speed effects but incorrectly treats them as a reduction in initial gain.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1135,
        "output_tokens": 248,
        "total_tokens": 1383,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1135,
        "output_tokens": 248,
        "total_tokens": 1383,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit, increasing the capacitance at nodes P and Q will affect the initial voltage gain. The nodes P and Q are part of the differential pair formed by transistors M1 and M2. The capacitance at these nodes influences the frequency response of the circuit.\n\nWhen the capacitance at nodes P and Q is increased, the following effects can be observed:\n\n1. **Lower Bandwidth**: The increased capacitance will lower the bandwidth of the circuit. This is because the increased capacitance will form a low-pass filter with the resistance seen at these nodes, reducing the high-frequency response.\n\n2. **Initial Voltage Gain**: The initial voltage gain of the circuit is primarily determined by the transconductance of the transistors and the load resistance. However, the increased capacitance will cause a slower response to changes in the input signal, which can effectively reduce the initial voltage gain at higher frequencies. At low frequencies, the initial voltage gain might not be significantly affected, but at higher frequencies, the gain will drop off more quickly due to the increased capacitance.\n\nIn summary, increasing the capacitance at nodes P and Q will reduce the initial voltage gain at higher frequencies, effectively lowering the overall bandwidth of the circuit.",
        "format": "markdown",
        "sha256": "ed87a6e3560414b8c02482842799b0cdd14928d7bf3c5698e56dff53c1d14a92"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misses the central result: increasing capacitance leaves the initial voltage gain essentially unchanged because the longer amplification interval cancels the slower node-voltage change. It discusses the real bandwidth and transient-speed effects but incorrectly treats them as a reduction in initial gain.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1135,
        "output_tokens": 248,
        "total_tokens": 1383,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1135,
        "output_tokens": 248,
        "total_tokens": 1383,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of transistors M5 and M6 in the given circuit will generally improve the speed of the circuit. This is because increasing the width of a MOSFET transistor reduces its on-resistance (R_on), which allows for faster charging and discharging of the capacitive loads at nodes X and Y. This results in faster switching times and improved overall speed of the circuit.\n\nHowever, it is important to note that increasing the width also increases the gate capacitance of M5 and M6, which can have a counteracting effect by increasing the load on the preceding stages. Therefore, while the immediate effect of reducing R_on tends to dominate and improve speed, the overall impact on speed will depend on the balance between reduced resistance and increased capacitance.\n\nIn summary, increasing the widths of M5 and M6 will likely improve the speed of the circuit, but the exact impact should be evaluated considering the specific design and operating conditions.",
        "format": "markdown",
        "sha256": "1fdcf681e6d1533ba8d6878bba81de01f0856dd3020c7f95c356808594f013ac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly predicts an initial speed improvement and notes a capacitance tradeoff, but it does not identify the cross-coupled regenerative action or explain that added node capacitance eventually creates an optimum and can degrade speed.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1134,
        "output_tokens": 189,
        "total_tokens": 1323,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1134,
        "output_tokens": 189,
        "total_tokens": 1323,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of transistors M5 and M6 in the given circuit will generally improve the speed of the circuit. This is because increasing the width of a MOSFET transistor reduces its on-resistance (Rds(on)), which allows for faster charging and discharging of the capacitive loads at nodes X and Y. This results in faster switching times and improved overall speed of the circuit.\n\nHowever, it is important to note that increasing the width also increases the gate capacitance, which can have a counteracting effect by increasing the load on the preceding stages. Therefore, while the immediate effect of reducing the on-resistance tends to dominate and improve speed, there is a trade-off with increased gate capacitance that must be considered in the overall design.\n\nIn summary, increasing the widths of M5 and M6 will likely improve the speed of the circuit, but the designer must balance this with the potential increase in gate capacitance.",
        "format": "markdown",
        "sha256": "7eef9a0da13ac18aa925143b7a4e7894d04b1b64a56ce6f9b5b17a17d0ba1d6b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gives the correct initial trend and recognizes a capacitance tradeoff. However, it misses that M5/M6 speed the latch by strengthening regeneration, and it does not clearly explain that their added node capacitance eventually limits the benefit or creates an optimum; the stated loading of preceding stages is also imprecise for this topology.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1134,
        "output_tokens": 187,
        "total_tokens": 1321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1134,
        "output_tokens": 187,
        "total_tokens": 1321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of transistors M5 and M6 in the given circuit will generally improve the speed of the circuit. This is because increasing the width of a MOSFET transistor reduces its on-resistance (Rds(on)), which allows for faster charging and discharging of the capacitive loads at nodes X and Y. This results in faster switching times and improved overall speed of the circuit.\n\nHowever, it is important to note that increasing the width also increases the gate capacitance, which can have a counteracting effect by increasing the load on the preceding stages. Therefore, while the immediate effect of reducing the on-resistance tends to dominate and improve speed, there is a trade-off with increased gate capacitance that must be considered in the overall design.\n\nIn summary, increasing the widths of M5 and M6 will likely improve the speed of the circuit, but the designer must balance this with the potential increase in gate capacitance.",
        "format": "markdown",
        "sha256": "7eef9a0da13ac18aa925143b7a4e7894d04b1b64a56ce6f9b5b17a17d0ba1d6b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gives the correct initial trend and recognizes a capacitance tradeoff. However, it misses that M5/M6 speed the latch by strengthening regeneration, and it does not clearly explain that their added node capacitance eventually limits the benefit or creates an optimum; the stated loading of preceding stages is also imprecise for this topology.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1134,
        "output_tokens": 187,
        "total_tokens": 1321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1134,
        "output_tokens": 187,
        "total_tokens": 1321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit, increasing the widths of the clocked transistors (those controlled by the clock signal CK) generally improves the speed of the circuit. This is because wider transistors have lower resistance and can drive larger currents, which results in faster charging and discharging of the capacitive nodes in the circuit.\n\nSpecifically, wider transistors will have:\n1. **Lower ON resistance**: This allows for faster switching times as the transistors can charge and discharge the nodes more quickly.\n2. **Higher drive strength**: This means they can handle larger currents, which is beneficial for quickly changing the voltage levels at the nodes.\n\nHowever, there are trade-offs to consider:\n- **Increased power consumption**: Wider transistors consume more power, which might not be desirable in low-power applications.\n- **Increased area**: Wider transistors take up more silicon area, which can be a concern in highly integrated circuits.\n\nIn summary, increasing the widths of the clocked transistors in the circuit will generally improve the speed, but it is important to balance this with power and area considerations.",
        "format": "markdown",
        "sha256": "ee5a6cc36b499949169b5cc560e509f3d18dae3d856965207c8bfd853c903b54"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly says widening the clocked transistors initially improves speed by lowering their on-resistance, but omits the added node capacitance that eventually limits or reverses the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 798,
        "output_tokens": 222,
        "total_tokens": 1020,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 798,
        "output_tokens": 222,
        "total_tokens": 1020,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, increasing the widths of the clocked transistors (those controlled by the clock signal CK) generally improves the speed of the circuit. This is because wider transistors have lower resistance and can charge and discharge the capacitive nodes faster, leading to quicker transitions between logic states.\n\nHowever, there are some considerations to keep in mind:\n\n1. **Power Consumption**: Wider transistors consume more power due to increased leakage currents and dynamic power consumption. This can be a trade-off between speed and power efficiency.\n\n2. **Area**: Increasing the width of transistors will also increase the area of the circuit, which might be a concern in highly dense integrated circuits.\n\n3. **Capacitance**: While wider transistors reduce resistance, they also increase the gate capacitance. This can sometimes offset the speed improvement if the increase in capacitance is significant.\n\nIn summary, increasing the widths of the clocked transistors in the circuit will generally improve the speed, but it is important to balance this with power consumption, area, and capacitance considerations.",
        "format": "markdown",
        "sha256": "6fc4cbe9368b0b00cf9d2e7583c306324857a493e20490e940f9a2b79ed1c1a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies that lower on-resistance from wider clocked transistors improves speed. However, it cites increased gate capacitance rather than the added capacitance at the latch nodes that eventually limits or reverses the benefit, and does not clearly state the initial-improvement/optimum-width trend.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 798,
        "output_tokens": 215,
        "total_tokens": 1013,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 798,
        "output_tokens": 215,
        "total_tokens": 1013,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, increasing the widths of the clocked transistors (those controlled by the clock signal CK) generally improves the speed of the circuit. This is because wider transistors have lower resistance and can charge and discharge the capacitive nodes faster, leading to quicker transitions between logic states.\n\nHowever, there are some considerations to keep in mind:\n\n1. **Power Consumption**: Wider transistors consume more power due to increased leakage currents and dynamic power consumption. This can be a trade-off between speed and power efficiency.\n\n2. **Area**: Increasing the width of transistors will also increase the area of the circuit, which might be a concern in highly dense integrated circuits.\n\n3. **Capacitance**: While wider transistors reduce resistance, they also increase the gate capacitance. This can sometimes offset the speed improvement if the increase in capacitance is significant.\n\nIn summary, increasing the widths of the clocked transistors in the circuit will generally improve the speed, but it is important to balance this with power consumption, area, and capacitance considerations.",
        "format": "markdown",
        "sha256": "6fc4cbe9368b0b00cf9d2e7583c306324857a493e20490e940f9a2b79ed1c1a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies that lower on-resistance from wider clocked transistors improves speed. However, it cites increased gate capacitance rather than the added capacitance at the latch nodes that eventually limits or reverses the benefit, and does not clearly state the initial-improvement/optimum-width trend.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 798,
        "output_tokens": 215,
        "total_tokens": 1013,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 798,
        "output_tokens": 215,
        "total_tokens": 1013,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No, the structure in the figure does not provide quadrature outputs. The circuit shown is a dynamic latch, which is typically used for temporary storage of data in digital circuits. Quadrature outputs refer to signals that are 90 degrees out of phase with each other, commonly used in applications such as signal processing and communication systems. The circuit in the figure does not generate such phase-shifted signals.",
        "format": "markdown",
        "sha256": "a0e7b217eb93f260d1e477493ebf21bff7a32dc339a66eedf63b4676e1350676"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly recognizes latch-like circuitry but misses the C2MOS divide-by-two feedback structure and its nominal quadrature outputs, so its conclusion is wrong for an irrelevant reason.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 783,
        "output_tokens": 80,
        "total_tokens": 863,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 783,
        "output_tokens": 80,
        "total_tokens": 863,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No, the structure in the figure does not provide quadrature outputs. The circuit shown is a dynamic latch, which is typically used for temporary storage of data in digital circuits. Quadrature outputs refer to signals that are 90 degrees out of phase with each other, commonly used in applications like signal processing and communication systems. The given circuit does not generate such phase-shifted signals.",
        "format": "markdown",
        "sha256": "240fa151cb16456355d1afecd3991098a6a7262788bb6252791c82a24c28703b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It mischaracterizes the two-latch feedback structure as a standalone storage latch and misses that it nominally divides by two to produce quadrature outputs.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 783,
        "output_tokens": 77,
        "total_tokens": 860,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 783,
        "output_tokens": 77,
        "total_tokens": 860,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No, the structure in the figure does not provide quadrature outputs. The circuit shown is a dynamic latch, which is typically used for temporary storage of data in digital circuits. Quadrature outputs refer to signals that are 90 degrees out of phase with each other, commonly used in applications like signal processing and communication systems. The given circuit does not generate such phase-shifted signals.",
        "format": "markdown",
        "sha256": "240fa151cb16456355d1afecd3991098a6a7262788bb6252791c82a24c28703b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It mischaracterizes the two-latch feedback structure as a standalone storage latch and misses that it nominally divides by two to produce quadrature outputs.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 783,
        "output_tokens": 77,
        "total_tokens": 860,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 783,
        "output_tokens": 77,
        "total_tokens": 860,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, increasing the widths of the clocked transistors generally improves the speed of the circuit. This is because wider transistors have lower resistance and can drive larger currents, which results in faster switching times. \n\nHowever, there are trade-offs to consider:\n1. **Increased Power Consumption**: Wider transistors consume more power due to higher leakage currents and dynamic power consumption.\n2. **Increased Capacitance**: Wider transistors have higher gate capacitance, which can slow down the circuit if not properly managed.\n3. **Area**: Wider transistors take up more silicon area, which might be a constraint in some designs.\n\nOverall, while increasing the widths of the clocked transistors can improve speed, it is important to balance this with power, capacitance, and area considerations.",
        "format": "markdown",
        "sha256": "3577c23543824a92a850f316d7b4c73a29168edaf0adeeff9be40c7db2973ce1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that wider clocked transistors improve speed because their lower resistance enables faster switching. It omits the topology-specific point that their added capacitance largely stays off the data path and does not mention charge sharing as a limit; the generic capacitance caveat does not change the correct conclusion.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 798,
        "output_tokens": 165,
        "total_tokens": 963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 798,
        "output_tokens": 165,
        "total_tokens": 963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, increasing the widths of the clocked transistors generally improves the speed of the circuit. This is because wider transistors have lower resistance and can drive larger currents, which results in faster switching times. \n\nHowever, there are trade-offs to consider:\n1. **Increased Capacitance**: Wider transistors have higher gate capacitance, which can slow down the circuit if the increased capacitance outweighs the benefits of lower resistance.\n2. **Power Consumption**: Wider transistors consume more power, which can be a concern in power-sensitive applications.\n3. **Area**: Wider transistors take up more silicon area, which can be a limitation in densely packed designs.\n\nOverall, while increasing the widths of the clocked transistors can improve speed, it is important to balance this with the potential increase in capacitance, power consumption, and area.",
        "format": "markdown",
        "sha256": "0bc13bc4e778f627119b0c732064939d9d4146076406f5a5d4fd5ff25f88a304"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed because it lowers their resistance, but omits the topology-specific charge-sharing effect that degrades swing and limits the improvement.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 798,
        "output_tokens": 177,
        "total_tokens": 975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 798,
        "output_tokens": 177,
        "total_tokens": 975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, increasing the widths of the clocked transistors generally improves the speed of the circuit. This is because wider transistors have lower resistance and can drive larger currents, which results in faster switching times. \n\nHowever, there are trade-offs to consider:\n1. **Increased Capacitance**: Wider transistors have higher gate capacitance, which can slow down the circuit if the increased capacitance outweighs the benefits of lower resistance.\n2. **Power Consumption**: Wider transistors consume more power, which can be a concern in power-sensitive applications.\n3. **Area**: Wider transistors take up more silicon area, which can be a limitation in densely packed designs.\n\nOverall, while increasing the widths of the clocked transistors can improve speed, it is important to balance this with the potential increase in capacitance, power consumption, and area.",
        "format": "markdown",
        "sha256": "0bc13bc4e778f627119b0c732064939d9d4146076406f5a5d4fd5ff25f88a304"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed because it lowers their resistance, but omits the topology-specific charge-sharing effect that degrades swing and limits the improvement.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 798,
        "output_tokens": 177,
        "total_tokens": 975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 798,
        "output_tokens": 177,
        "total_tokens": 975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure depicts a ring oscillator circuit, which is a type of electronic oscillator consisting of an odd number of NOT gates (inverters) whose output oscillates between two voltage levels, representing true and false. Here's a detailed analysis of the arrangement:\n\n1. **Inverters (NOT Gates)**: The circuit contains an odd number of inverters. In this case, there are three inverters in the loop. Each inverter flips the input signal, so a high input becomes low and a low input becomes high.\n\n2. **Clock Signals (CK and \\(\\overline{CK}\\))**: The circuit includes two clock signals, CK and \\(\\overline{CK}\\) (the complement of CK). These clock signals control the switches in the circuit.\n\n3. **Switches**: There are two switches controlled by the clock signals:\n   - The first switch is controlled by CK.\n   - The second switch is controlled by \\(\\overline{CK}\\).\n\n4. **Operation**:\n   - When CK is high, the first switch closes, allowing the signal to pass through the first inverter.\n   - When \\(\\overline{CK}\\) is high (which happens when CK is low), the second switch closes, allowing the signal to pass through the remaining inverters.\n   - This alternating switching mechanism ensures that the signal propagates through the inverters, creating a feedback loop.\n\n5. **Oscillation**: The feedback loop with an odd number of inverters causes the signal to oscillate. The output of the last inverter is fed back to the input of the first inverter. The propagation delay through the inverters determines the frequency of oscillation.\n\n6. **Frequency of Oscillation**: The frequency of the oscillation is determined by the number of inverters and their propagation delay. The more inverters there are, the lower the frequency, as the signal takes longer to propagate through the entire loop.\n\nIn summary, this ring oscillator circuit uses an odd number of inverters and clock-controlled switches to create a feedback loop that generates a periodic oscillating signal. The frequency of this oscillation is determined by the number of inverters and their individual propagation delays.",
        "format": "markdown",
        "sha256": "dd3ac695380a60330a93f43203e13b166ab2f1ecca52cddaee9c71d88c754ab4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a free-running ring oscillator rather than a dynamic-latch divide-by-two, and misses the intended half-clock-frequency operation.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 441,
        "total_tokens": 1560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 441,
        "total_tokens": 1560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure represents a ring oscillator circuit. A ring oscillator is a device composed of an odd number of NOT gates (inverters) whose output oscillates between two voltage levels, representing true and false. Here’s a detailed analysis of the arrangement:\n\n1. **Inverters (NOT Gates)**: The circuit consists of an odd number of inverters connected in a series. In this case, there are three inverters.\n\n2. **Clock Signals (CK and \\(\\overline{CK}\\))**: The circuit includes two clock signals, CK and \\(\\overline{CK}\\) (the complement of CK). These clock signals control the switches in the circuit.\n\n3. **Switches**: There are two switches controlled by the clock signals. The first switch is controlled by CK, and the second switch is controlled by \\(\\overline{CK}\\).\n\n4. **Feedback Loop**: The output of the last inverter is fed back to the input of the first inverter, creating a closed loop.\n\n### Operation:\n- When CK is high, the first switch closes, allowing the signal to pass through the first inverter.\n- When \\(\\overline{CK}\\) is high (which happens when CK is low), the second switch closes, allowing the signal to pass through the remaining inverters.\n- The signal propagates through the inverters, and due to the odd number of inverters, the output will oscillate between high and low states.\n\n### Oscillation:\n- The oscillation frequency depends on the propagation delay of the inverters and the number of inverters in the loop.\n- The period of oscillation is twice the sum of the delays of all the inverters in the loop.\n\n### Applications:\n- Ring oscillators are commonly used in integrated circuits for clock generation, random number generation, and as test structures for measuring the performance of semiconductor processes.\n\nIn summary, the figure depicts a ring oscillator circuit with three inverters and two clock-controlled switches, which generates an oscillating output signal.",
        "format": "markdown",
        "sha256": "daa54ecac010d4aafe98c3ef27a826151defb1ce8947f3b4e6c328557a98e8d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is a dynamic-latch divide-by-two, not a ring oscillator. The answer misses the essential function and incorrectly attributes oscillation to an odd-inverter delay loop.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 406,
        "total_tokens": 1525,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 406,
        "total_tokens": 1525,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure represents a ring oscillator circuit. A ring oscillator is a device composed of an odd number of NOT gates (inverters) whose output oscillates between two voltage levels, representing true and false. Here’s a detailed analysis of the arrangement:\n\n1. **Inverters (NOT Gates)**: The circuit consists of an odd number of inverters connected in a series. In this case, there are three inverters.\n\n2. **Clock Signals (CK and \\(\\overline{CK}\\))**: The circuit includes two clock signals, CK and \\(\\overline{CK}\\) (the complement of CK). These clock signals control the switches in the circuit.\n\n3. **Switches**: There are two switches controlled by the clock signals. The first switch is controlled by CK, and the second switch is controlled by \\(\\overline{CK}\\).\n\n4. **Feedback Loop**: The output of the last inverter is fed back to the input of the first inverter, creating a closed loop.\n\n### Operation:\n- When CK is high, the first switch closes, allowing the signal to pass through the first inverter.\n- When \\(\\overline{CK}\\) is high (which happens when CK is low), the second switch closes, allowing the signal to pass through the remaining inverters.\n- The signal propagates through the inverters, and due to the odd number of inverters, the output will oscillate between high and low states.\n\n### Oscillation:\n- The oscillation frequency depends on the propagation delay of the inverters and the number of inverters in the loop.\n- The period of oscillation is twice the sum of the delays of all the inverters in the loop.\n\n### Applications:\n- Ring oscillators are commonly used in integrated circuits for clock generation, random number generation, and as test structures for measuring the performance of semiconductor processes.\n\nIn summary, the figure depicts a ring oscillator circuit with three inverters and two clock-controlled switches, which generates an oscillating output signal.",
        "format": "markdown",
        "sha256": "daa54ecac010d4aafe98c3ef27a826151defb1ce8947f3b4e6c328557a98e8d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is a dynamic-latch divide-by-two, not a ring oscillator. The answer misses the essential function and incorrectly attributes oscillation to an odd-inverter delay loop.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 406,
        "total_tokens": 1525,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1119,
        "output_tokens": 406,
        "total_tokens": 1525,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter in the figure is part of a clock signal generation circuit, specifically a ring oscillator. The red inverter, labeled as \\( \\text{Inv}_1 \\), is connected in a feedback loop with other inverters. Here’s how it affects the performance:\n\n1. **Oscillation Frequency**: The red inverter contributes to the total delay of the feedback loop. The frequency of oscillation of the ring oscillator is inversely proportional to the total delay of the loop. Adding or removing inverters will change the oscillation frequency. More inverters result in a lower frequency (longer period), while fewer inverters result in a higher frequency (shorter period).\n\n2. **Signal Integrity**: The red inverter ensures that the signal is properly inverted and maintains the integrity of the oscillating signal. Each inverter in the loop contributes to the overall signal shaping, ensuring that the output is a clean square wave.\n\n3. **Stability**: The number of inverters in the loop must be odd to ensure proper oscillation. The red inverter helps maintain this odd count, which is crucial for the circuit to function as a ring oscillator. If the number of inverters were even, the circuit would not oscillate correctly.\n\n4. **Power Consumption**: Each inverter in the loop consumes power. The red inverter adds to the total power consumption of the circuit. However, this is typically a minor consideration compared to the importance of achieving the desired oscillation frequency and signal integrity.\n\nIn summary, the red inverter is essential for maintaining the correct oscillation frequency, signal integrity, and stability of the ring oscillator. It ensures that the circuit functions as intended by contributing to the total delay and maintaining an odd number of inverters in the loop.",
        "format": "markdown",
        "sha256": "712ddfcfb4f4b5dac7c59957133708cf58bc074b088810bc7d6ff49f51135a64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a ring oscillator and gives generic oscillator claims. It misses the red inverter’s feedforward bypass, its speed benefit, and the low-frequency drawback that raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 350,
        "total_tokens": 1474,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 350,
        "total_tokens": 1474,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter in the figure is part of a clock signal generation circuit, specifically a ring oscillator. The red inverter, labeled as \\( \\text{Inv}_1 \\), is connected in a feedback loop with other inverters to form the ring oscillator.\n\nHere's how the red inverter affects the performance:\n\n1. **Oscillation Frequency**: The red inverter contributes to the total delay of the ring oscillator. The frequency of oscillation is inversely proportional to the total delay of the loop. Adding or removing inverters will change the oscillation frequency. In this case, the red inverter is essential for maintaining the correct number of stages to ensure oscillation.\n\n2. **Signal Inversion**: Each inverter inverts the signal. The red inverter ensures that the signal is inverted an odd number of times, which is necessary for the feedback loop to produce oscillations. If the number of inverters were even, the signal would not oscillate because it would not return to its original state after one complete loop.\n\n3. **Stability and Performance**: The characteristics of the red inverter, such as its propagation delay and drive strength, affect the overall performance and stability of the oscillator. Variations in the red inverter's characteristics can lead to changes in the oscillation frequency and stability.\n\n4. **Power Consumption**: The red inverter, like all inverters in the loop, consumes power. The power consumption of the ring oscillator is influenced by the number of inverters and their individual power characteristics.\n\nIn summary, the red inverter is crucial for the proper functioning of the ring oscillator, affecting its oscillation frequency, signal inversion, stability, and power consumption.",
        "format": "markdown",
        "sha256": "9531efbcd81bf4c07ab56871829af6dcaef13902dbfbe6c4eda6cd10d087b102"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a ring oscillator and treats the red inverter as an ordinary oscillator stage. It misses the key feedforward bypass that speeds the divider and the unclocked branch’s low-frequency drawback; its generic mention of a feedback loop is only minimally relevant.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 332,
        "total_tokens": 1456,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 332,
        "total_tokens": 1456,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter in the figure is part of a clock signal generation circuit, specifically a ring oscillator. The red inverter, labeled as \\( \\text{Inv}_1 \\), is connected in a feedback loop with other inverters to form the ring oscillator.\n\nHere's how the red inverter affects the performance:\n\n1. **Oscillation Frequency**: The red inverter contributes to the total delay of the ring oscillator. The frequency of oscillation is inversely proportional to the total delay of the loop. Adding or removing inverters will change the oscillation frequency. In this case, the red inverter is essential for maintaining the correct number of stages to ensure oscillation.\n\n2. **Signal Inversion**: Each inverter inverts the signal. The red inverter ensures that the signal is inverted an odd number of times, which is necessary for the feedback loop to produce oscillations. If the number of inverters were even, the signal would not oscillate because it would not return to its original state after one complete loop.\n\n3. **Stability and Performance**: The characteristics of the red inverter, such as its propagation delay and drive strength, affect the overall performance and stability of the oscillator. Variations in the red inverter's characteristics can lead to changes in the oscillation frequency and stability.\n\n4. **Power Consumption**: The red inverter, like all inverters in the loop, consumes power. The power consumption of the ring oscillator is influenced by the number of inverters and their individual power characteristics.\n\nIn summary, the red inverter is crucial for the proper functioning of the ring oscillator, affecting its oscillation frequency, signal inversion, stability, and power consumption.",
        "format": "markdown",
        "sha256": "9531efbcd81bf4c07ab56871829af6dcaef13902dbfbe6c4eda6cd10d087b102"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a ring oscillator and treats the red inverter as an ordinary oscillator stage. It misses the key feedforward bypass that speeds the divider and the unclocked branch’s low-frequency drawback; its generic mention of a feedback loop is only minimally relevant.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 332,
        "total_tokens": 1456,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 332,
        "total_tokens": 1456,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The answer provided is correct. The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`. This configuration helps maintain the state of the node between the two inverters, even in the presence of leakage currents. \n\nIn more detail:\n\n- The red inverter and `Inv1` form a feedback loop that stabilizes the voltage at the node between them.\n- When the clock (`CK`) is low, the node between the two inverters is isolated from the rest of the circuit, and the feedback loop ensures that the node retains its state.\n- This mechanism removes the minimum clock frequency requirement because the state is preserved by the latch, preventing the node from drifting due to leakage currents.\n\nTherefore, the red inverter's role is indeed to act as a keeper, ensuring the stability of the node's state and mitigating the effects of leakage.",
        "format": "markdown",
        "sha256": "d770d3327fda4a6251b420bb429738bbe5c0ad5b23d34653cd8ec1db1c8b9898"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly treats the red inverter as a cross-coupled keeper. It is an unclocked feedforward branch that bypasses part of the latch path; it can help at high speed but can disrupt operation at low clock rates and raise the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1169,
        "output_tokens": 174,
        "total_tokens": 1343,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1169,
        "output_tokens": 174,
        "total_tokens": 1343,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The answer provided is correct. The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`. This configuration helps maintain the state of the node between the two inverters, even in the presence of leakage currents. \n\nIn more detail:\n\n- The red inverter and `Inv1` form a feedback loop that creates a latch. This latch can hold a logic state (either high or low) stable.\n- When the clock (`CK`) is low, the state of the node between the two inverters is maintained by the latch, preventing it from changing due to leakage currents.\n- This removes the minimum clock frequency requirement because the latch ensures that the state is preserved even if the clock is not toggling frequently.\n\nTherefore, the role of the red inverter is indeed to act as a keeper, ensuring the stability of the logic state and mitigating the effects of leakage.",
        "format": "markdown",
        "sha256": "95190ebc73244f83b0bb769c902cb7eeb628d1fd1d5e61dc9b04b17c492fe0e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer repeats the incorrect keeper interpretation. The red inverter is a feedforward branch that bypasses part of the latch path; it can help at high speed but can disrupt operation at low clock rates, increasing the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1169,
        "output_tokens": 179,
        "total_tokens": 1348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1169,
        "output_tokens": 179,
        "total_tokens": 1348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The answer provided is correct. The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`. This configuration helps maintain the state of the node between the two inverters, even in the presence of leakage currents. \n\nIn more detail:\n\n- The red inverter and `Inv1` form a feedback loop that creates a latch. This latch can hold a logic state (either high or low) stable.\n- When the clock (`CK`) is low, the state of the node between the two inverters is maintained by the latch, preventing it from changing due to leakage currents.\n- This removes the minimum clock frequency requirement because the latch ensures that the state is preserved even if the clock is not toggling frequently.\n\nTherefore, the role of the red inverter is indeed to act as a keeper, ensuring the stability of the logic state and mitigating the effects of leakage.",
        "format": "markdown",
        "sha256": "95190ebc73244f83b0bb769c902cb7eeb628d1fd1d5e61dc9b04b17c492fe0e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer repeats the incorrect keeper interpretation. The red inverter is a feedforward branch that bypasses part of the latch path; it can help at high speed but can disrupt operation at low clock rates, increasing the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1169,
        "output_tokens": 179,
        "total_tokens": 1348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1169,
        "output_tokens": 179,
        "total_tokens": 1348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the circuit for noise figure (NF) while keeping the input resistance (\\(R_{in}\\)) equal to 50 Ohms, you can follow these steps:\n\n1. **Determine the Transconductance (\\(g_m\\)) of \\(M_1\\):**\n   The input resistance \\(R_{in}\\) is given by:\n   \\[\n   R_{in} = \\frac{1}{g_m}\n   \\]\n   Since \\(R_{in}\\) must be 50 Ohms:\n   \\[\n   g_m = \\frac{1}{R_{in}} = \\frac{1}{50} = 0.02 \\, \\text{S}\n   \\]\n\n2. **Optimize \\(R_F\\) for Noise Figure:**\n   The feedback resistor \\(R_F\\) plays a crucial role in determining the noise figure. The noise figure is minimized when the noise contribution from \\(R_F\\) is balanced with the noise from the transistor \\(M_1\\). The optimal value of \\(R_F\\) can be found using the following relationship:\n   \\[\n   R_F = \\frac{1}{g_m}\n   \\]\n   Since \\(g_m = 0.02 \\, \\text{S}\\):\n   \\[\n   R_F = \\frac{1}{0.02} = 50 \\, \\Omega\n   \\]\n\n3. **Biasing and Operating Point:**\n   Ensure that the transistor \\(M_1\\) is properly biased to achieve the desired \\(g_m\\). This involves setting the appropriate gate-source voltage (\\(V_{GS}\\)) and drain current (\\(I_D\\)). The transconductance \\(g_m\\) is related to the drain current by:\n   \\[\n   g_m = \\sqrt{2 \\mu_n C_{ox} \\frac{W}{L} I_D}\n   \\]\n   where \\(\\mu_n\\) is the mobility of electrons, \\(C_{ox}\\) is the oxide capacitance per unit area, and \\(\\frac{W}{L}\\) is the width-to-length ratio of the transistor.\n\n4. **Minimize Parasitic Capacitances:**\n   Parasitic capacitances can degrade the noise performance. Ensure that the layout minimizes parasitic capacitances, especially at high frequencies.\n\n5. **Use Low-Noise Transistors:**\n   Choose transistors with low flicker noise and thermal noise characteristics. The noise figure is influenced by the intrinsic noise of the transistors used.\n\n6. **Temperature Considerations:**\n   The noise figure can be affected by temperature. Ensure that the circuit operates within a temperature range where the noise performance is optimal.\n\nBy following these steps, you can optimize the circuit for the lowest possible noise figure while maintaining the input resistance at 50 Ohms.",
        "format": "markdown",
        "sha256": "1e9e344743c74e22bb1a9dcabec4ed9fe29f603595bfdf6a947b7ec6e8fc1066"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It incorrectly assumes Rin = 1/gm, fixes gm at 1/50 S, and sets RF = 50 Ω without justification. It misses the finite-output-resistance relation that allows gm and RF to increase together while maintaining the match and lowering NF.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 582,
        "total_tokens": 1718,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 582,
        "total_tokens": 1718,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the circuit for noise figure (NF) while keeping the input resistance (\\(R_{in}\\)) equal to 50 Ohms, you can follow these steps:\n\n1. **Determine the Transconductance (\\(g_m\\)) of \\(M_1\\):**\n   The input resistance \\(R_{in}\\) is given by:\n   \\[\n   R_{in} = \\frac{1}{g_m}\n   \\]\n   Since \\(R_{in}\\) must be 50 Ohms:\n   \\[\n   g_m = \\frac{1}{R_{in}} = \\frac{1}{50} = 0.02 \\, \\text{S}\n   \\]\n\n2. **Optimize the Feedback Resistor (\\(R_F\\)):**\n   The feedback resistor \\(R_F\\) plays a crucial role in determining the overall gain and stability of the circuit. To minimize the noise figure, \\(R_F\\) should be chosen to balance the trade-off between gain and noise. A typical approach is to set \\(R_F\\) to a value that provides a reasonable gain without significantly increasing the noise. \n\n3. **Minimize the Noise Contribution of \\(M_1\\):**\n   The noise figure is influenced by the noise generated by the transistor \\(M_1\\). To minimize this noise:\n   - Use a transistor with a low noise figure.\n   - Ensure that \\(M_1\\) operates in the saturation region for optimal performance.\n   - Choose a transistor with a high \\(g_m\\) to reduce the noise contribution.\n\n4. **Biasing of \\(M_1\\) and \\(M_2\\):**\n   Proper biasing of \\(M_1\\) and \\(M_2\\) is essential to ensure that they operate in the desired region. The biasing should be set such that \\(M_1\\) has the required \\(g_m\\) and \\(M_2\\) provides the necessary current.\n\n5. **Capacitor \\(C_1\\):**\n   The coupling capacitor \\(C_1\\) should be chosen to have a low reactance at the operating frequency to ensure that it does not affect the input impedance or the noise figure.\n\n6. **Simulation and Iteration:**\n   After selecting initial values for \\(R_F\\), \\(M_1\\), and \\(M_2\\), simulate the circuit to evaluate the noise figure and input resistance. Adjust the component values iteratively to achieve the desired performance.\n\nIn summary, the key steps are to set the transconductance \\(g_m\\) of \\(M_1\\) to 0.02 S to maintain \\(R_{in}\\) at 50 Ohms, choose an appropriate \\(R_F\\) to balance gain and noise, and ensure proper biasing and selection of low-noise transistors. Simulation tools can be very helpful in fine-tuning these parameters to achieve the optimal noise figure.",
        "format": "markdown",
        "sha256": "55923ea951b612bc4453fdc64c75bc92fca48b356e17b71560564a7738227de1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It incorrectly assumes Rin = 1/gm, fixing gm at 1/50 S, and never uses finite output resistance to show how gm and RF can increase together while preserving the match and reducing NF. The generic advice about biasing and simulation does not address the key optimization.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 607,
        "total_tokens": 1743,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 607,
        "total_tokens": 1743,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the circuit for noise figure (NF) while keeping the input resistance (\\(R_{in}\\)) equal to 50 Ohms, you need to consider the following steps:\n\n1. **Transistor Selection (M1 and M2):**\n   - Choose low-noise transistors for \\(M_1\\) and \\(M_2\\). The noise figure of the transistors themselves plays a significant role in the overall noise figure of the circuit.\n   - Ensure that the transistors have a high transconductance (\\(g_m\\)) to minimize the noise contribution.\n\n2. **Biasing:**\n   - Properly bias the transistors to operate in the saturation region where they exhibit the best noise performance.\n   - Ensure that the biasing does not affect the input resistance. This can be achieved by using a current source or a resistor network that does not load the input.\n\n3. **Feedback Resistor (\\(R_F\\)):**\n   - The value of \\(R_F\\) affects both the gain and the input resistance of the circuit. To maintain \\(R_{in} = 50 \\Omega\\), you need to set \\(R_F\\) appropriately.\n   - The input resistance \\(R_{in}\\) can be approximated as:\n     \\[\n     R_{in} \\approx \\frac{R_F}{1 + g_m R_F}\n     \\]\n     To achieve \\(R_{in} = 50 \\Omega\\), solve for \\(R_F\\):\n     \\[\n     50 \\approx \\frac{R_F}{1 + g_m R_F}\n     \\]\n     Rearranging gives:\n     \\[\n     R_F \\approx \\frac{50}{1 - 50 g_m}\n     \\]\n     Ensure that \\(g_m\\) is chosen such that the denominator is positive.\n\n4. **Capacitor (\\(C_1\\)):**\n   - Choose \\(C_1\\) to have a low impedance at the operating frequency to ensure it does not affect the input impedance or the noise figure.\n   - \\(C_1\\) should be large enough to act as a short circuit for the signal frequencies of interest.\n\n5. **Minimize Parasitics:**\n   - Minimize parasitic capacitances and inductances in the layout to reduce additional noise sources and maintain the desired input resistance.\n\n6. **Thermal Noise:**\n   - Minimize the thermal noise contribution from \\(R_F\\) by choosing an appropriate value that balances the trade-off between gain and noise.\n\nBy carefully selecting the transistors, setting the feedback resistor \\(R_F\\), and ensuring proper biasing and component values, you can optimize the circuit for a low noise figure while maintaining an input resistance of 50 Ohms.",
        "format": "markdown",
        "sha256": "6baabc228caf9ccec5cc8fd40aabd676c9b5874574e319639d13d704d811c0be"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gestures toward increasing gm and adjusting RF, but its input-resistance formula omits finite output resistance and implies gm must stay below 1/50 S. It therefore misses the key result: finite ro permits gm to exceed 1/Rs while RF is adjusted, lowering NF below 1 + gamma.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 567,
        "total_tokens": 1703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1136,
        "output_tokens": 567,
        "total_tokens": 1703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance \\( Z_{in} \\) of the given circuit, we need to analyze the small-signal model of the circuit. The circuit is a common-source amplifier with feedback. Here are the steps to find the input impedance:\n\n1. **Identify the small-signal parameters:**\n   - \\( g_{m1} \\): Transconductance of transistor \\( M_1 \\)\n   - \\( r_{o1} \\): Output resistance of transistor \\( M_1 \\)\n   - \\( g_{m2} \\): Transconductance of transistor \\( M_2 \\)\n   - \\( r_{o2} \\): Output resistance of transistor \\( M_2 \\)\n   - \\( g_{m3} \\): Transconductance of transistor \\( M_3 \\)\n   - \\( r_{o3} \\): Output resistance of transistor \\( M_3 \\)\n   - \\( R_D1 \\): Drain resistor of \\( M_1 \\)\n   - \\( R_D2 \\): Drain resistor of \\( M_3 \\)\n   - \\( R_F \\): Feedback resistor\n\n2. **Small-signal model:**\n   - The input impedance seen at the gate of \\( M_1 \\) is high because the gate of a MOSFET has a very high impedance.\n   - The impedance looking into the source of \\( M_1 \\) is \\( 1/g_{m1} \\).\n   - The impedance looking into the drain of \\( M_1 \\) is \\( R_D1 \\parallel r_{o1} \\).\n\n3. **Feedback effect:**\n   - The feedback resistor \\( R_F \\) connects the output \\( V_{out} \\) to the source of \\( M_1 \\).\n   - The feedback reduces the input impedance by a factor related to the loop gain.\n\n4. **Calculate the input impedance:**\n   - The input impedance \\( Z_{in} \\) is the impedance seen looking into the gate of \\( M_1 \\) with the feedback applied.\n   - Without feedback, the impedance looking into the gate of \\( M_1 \\) is very high.\n   - With feedback, the impedance is reduced by the feedback factor.\n\nThe input impedance \\( Z_{in} \\) can be approximated as:\n\n\\[ Z_{in} \\approx \\frac{R_F}{1 + g_{m1} R_F} \\]\n\nThis approximation assumes that the loop gain \\( g_{m1} R_F \\) is large. If the loop gain is not large, a more detailed analysis considering the exact small-signal model would be required.\n\nIn summary, the input impedance \\( Z_{in} \\) of the circuit is approximately:\n\n\\[ Z_{in} \\approx \\frac{R_F}{1 + g_{m1} R_F} \\]\n\nThis result shows that the feedback resistor \\( R_F \\) and the transconductance \\( g_{m1} \\) of the transistor \\( M_1 \\) play a crucial role in determining the input impedance of the circuit.",
        "format": "markdown",
        "sha256": "c651b54e86370671336b270f324ae98069a01c1adcf344f2b35929f74483e90a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the feedback connection and gives an unrelated approximation, omitting the two-stage unloaded gain and output resistance. The required result is \\(Z_{in}=(R_F+R_{D2})/(1+A_0)\\), with \\(A_0=\\tfrac12 g_{m1}g_{m2,3}R_{D1}R_{D2}\\).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 273,
        "output_tokens": 630,
        "total_tokens": 903,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 273,
        "output_tokens": 630,
        "total_tokens": 903,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance of the circuit, we need to analyze the small-signal model of the circuit. The circuit is a common-source amplifier with feedback. Let's denote the small-signal parameters as follows:\n\n- \\( g_{m1} \\): Transconductance of transistor \\( M_1 \\)\n- \\( g_{m2} \\): Transconductance of transistor \\( M_2 \\)\n- \\( g_{m3} \\): Transconductance of transistor \\( M_3 \\)\n- \\( r_{o1} \\): Output resistance of transistor \\( M_1 \\)\n- \\( r_{o2} \\): Output resistance of transistor \\( M_2 \\)\n- \\( r_{o3} \\): Output resistance of transistor \\( M_3 \\)\n- \\( R_{D1} \\): Drain resistor of transistor \\( M_1 \\)\n- \\( R_{D2} \\): Drain resistor of transistor \\( M_3 \\)\n- \\( R_F \\): Feedback resistor\n\n### Step-by-Step Analysis:\n\n1. **Small-Signal Model:**\n   - The input impedance \\( Z_{in} \\) is seen at the gate of \\( M_1 \\).\n   - The gate of \\( M_1 \\) is connected to the input signal \\( I_{in} \\) through \\( C_{in} \\) and \\( R_{in} \\).\n\n2. **Impedance at Node P:**\n   - The impedance looking into the gate of \\( M_1 \\) is very high (ideally infinite) because the gate of a MOSFET has a very high input impedance.\n   - Therefore, the impedance at node P is dominated by \\( R_{in} \\) and \\( C_{in} \\).\n\n3. **Impedance at Node X:**\n   - The impedance at node X is the parallel combination of \\( R_{D1} \\) and the output impedance of \\( M_1 \\).\n   - The output impedance of \\( M_1 \\) is \\( r_{o1} \\parallel \\left( \\frac{1}{g_{m1}} \\right) \\).\n\n4. **Impedance at Node Vout:**\n   - The impedance at node Vout is the parallel combination of \\( R_{D2} \\) and the output impedance of \\( M_3 \\).\n   - The output impedance of \\( M_3 \\) is \\( r_{o3} \\parallel \\left( \\frac{1}{g_{m3}} \\right) \\).\n\n5. **Feedback Impedance:**\n   - The feedback resistor \\( R_F \\) connects the output node Vout to the source of \\( M_1 \\).\n\n### Input Impedance Calculation:\n\nThe input impedance \\( Z_{in} \\) is primarily determined by the impedance seen at the gate of \\( M_1 \\), which is \\( R_{in} \\) in parallel with \\( C_{in} \\). Since the gate of \\( M_1 \\) has a very high impedance, the input impedance is:\n\n\\[ Z_{in} \\approx R_{in} \\parallel \\frac{1}{j\\omega C_{in}} \\]\n\nWhere:\n- \\( \\omega \\) is the angular frequency of the input signal.\n\nIn the low-frequency range (where the capacitive reactance is very high), the input impedance is dominated by \\( R_{in} \\):\n\n\\[ Z_{in} \\approx R_{in} \\]\n\nIn the high-frequency range (where the capacitive reactance is very low), the input impedance is dominated by \\( \\frac{1}{j\\omega C_{in}} \\):\n\n\\[ Z_{in} \\approx \\frac{1}{j\\omega C_{in}} \\]\n\n### Conclusion:\n\nThe input impedance \\( Z_{in} \\) of the circuit is:\n\n\\[ Z_{in} \\approx R_{in} \\parallel \\frac{1}{j\\omega C_{in}} \\]\n\nThis means that at low frequencies, the input impedance is approximately \\( R_{in} \\), and at high frequencies, it is dominated by the capacitive reactance \\( \\frac{1}{j\\omega C_{in}} \\).",
        "format": "markdown",
        "sha256": "681b3a4e8b736898aa5247275243e2318b646de679b6c751b2ee732536638696"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer does not compute the feedback-set input resistance and instead treats the MOS gate as an ideal high-impedance input, with an unrelated Rin/Cin model. It misses the required result, Rin = (RF + RD2)/(1 + A0), and misidentifies the feedback connection.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 273,
        "output_tokens": 869,
        "total_tokens": 1142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 273,
        "output_tokens": 869,
        "total_tokens": 1142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance of the circuit, we need to analyze the small-signal model of the circuit. The circuit is a common-source amplifier with feedback. Let's denote the small-signal parameters as follows:\n\n- \\( g_{m1} \\): Transconductance of transistor \\( M_1 \\)\n- \\( g_{m2} \\): Transconductance of transistor \\( M_2 \\)\n- \\( g_{m3} \\): Transconductance of transistor \\( M_3 \\)\n- \\( r_{o1} \\): Output resistance of transistor \\( M_1 \\)\n- \\( r_{o2} \\): Output resistance of transistor \\( M_2 \\)\n- \\( r_{o3} \\): Output resistance of transistor \\( M_3 \\)\n- \\( R_{D1} \\): Drain resistor of transistor \\( M_1 \\)\n- \\( R_{D2} \\): Drain resistor of transistor \\( M_3 \\)\n- \\( R_F \\): Feedback resistor\n\n### Step-by-Step Analysis:\n\n1. **Small-Signal Model:**\n   - The input impedance \\( Z_{in} \\) is seen at the gate of \\( M_1 \\).\n   - The gate of \\( M_1 \\) is connected to the input signal \\( I_{in} \\) through \\( C_{in} \\) and \\( R_{in} \\).\n\n2. **Impedance at Node P:**\n   - The impedance looking into the gate of \\( M_1 \\) is very high (ideally infinite) because the gate of a MOSFET has a very high input impedance.\n   - Therefore, the impedance at node P is dominated by \\( R_{in} \\) and \\( C_{in} \\).\n\n3. **Impedance at Node X:**\n   - The impedance at node X is the parallel combination of \\( R_{D1} \\) and the output impedance of \\( M_1 \\).\n   - The output impedance of \\( M_1 \\) is \\( r_{o1} \\parallel \\left( \\frac{1}{g_{m1}} \\right) \\).\n\n4. **Impedance at Node Vout:**\n   - The impedance at node Vout is the parallel combination of \\( R_{D2} \\) and the output impedance of \\( M_3 \\).\n   - The output impedance of \\( M_3 \\) is \\( r_{o3} \\parallel \\left( \\frac{1}{g_{m3}} \\right) \\).\n\n5. **Feedback Impedance:**\n   - The feedback resistor \\( R_F \\) connects the output node Vout to the source of \\( M_1 \\).\n\n### Input Impedance Calculation:\n\nThe input impedance \\( Z_{in} \\) is primarily determined by the impedance seen at the gate of \\( M_1 \\), which is \\( R_{in} \\) in parallel with \\( C_{in} \\). Since the gate of \\( M_1 \\) has a very high impedance, the input impedance is:\n\n\\[ Z_{in} \\approx R_{in} \\parallel \\frac{1}{j\\omega C_{in}} \\]\n\nWhere:\n- \\( \\omega \\) is the angular frequency of the input signal.\n\nIn the low-frequency range (where the capacitive reactance is very high), the input impedance is dominated by \\( R_{in} \\):\n\n\\[ Z_{in} \\approx R_{in} \\]\n\nIn the high-frequency range (where the capacitive reactance is very low), the input impedance is dominated by \\( \\frac{1}{j\\omega C_{in}} \\):\n\n\\[ Z_{in} \\approx \\frac{1}{j\\omega C_{in}} \\]\n\n### Conclusion:\n\nThe input impedance \\( Z_{in} \\) of the circuit is:\n\n\\[ Z_{in} \\approx R_{in} \\parallel \\frac{1}{j\\omega C_{in}} \\]\n\nThis means that at low frequencies, the input impedance is approximately \\( R_{in} \\), and at high frequencies, it is dominated by the capacitive reactance \\( \\frac{1}{j\\omega C_{in}} \\).",
        "format": "markdown",
        "sha256": "681b3a4e8b736898aa5247275243e2318b646de679b6c751b2ee732536638696"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer does not compute the feedback-set input resistance and instead treats the MOS gate as an ideal high-impedance input, with an unrelated Rin/Cin model. It misses the required result, Rin = (RF + RD2)/(1 + A0), and misidentifies the feedback connection.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 273,
        "output_tokens": 869,
        "total_tokens": 1142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 273,
        "output_tokens": 869,
        "total_tokens": 1142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise due to the thermal noise generated by the LDO regulator, follow these steps:\n\n1. **Determine the Noise Transfer Function**: Identify the transfer function from the LDO output noise to the VCO output phase noise. This involves understanding how the noise at \\( V_{out} \\) of the LDO affects the VCO's control voltage \\( V_{cont} \\) and subsequently the VCO's output frequency.\n\n2. **Calculate the Control Voltage Noise**: The thermal noise spectrum \\( S_{th} \\) at the LDO output \\( V_{out} \\) will be filtered and transferred to the control voltage \\( V_{cont} \\). This can be represented as \\( S_{V_{cont}} = H_{LDO-VCO}(f) \\cdot S_{th}(f) \\), where \\( H_{LDO-VCO}(f) \\) is the transfer function from the LDO output to the VCO control voltage.\n\n3. **Determine the VCO Sensitivity**: The VCO sensitivity \\( K_{VCO} \\) (in rad/Hz/V) indicates how the control voltage \\( V_{cont} \\) affects the VCO output frequency. This is typically given by the VCO's tuning characteristic.\n\n4. **Compute the Phase Noise**: The phase noise \\( L(f) \\) at the VCO output due to the control voltage noise can be computed using the VCO sensitivity. The phase noise spectrum \\( S_{\\phi}(f) \\) is given by:\n   \\[\n   S_{\\phi}(f) = \\left( \\frac{K_{VCO}}{f} \\right)^2 \\cdot S_{V_{cont}}(f)\n   \\]\n   Here, \\( f \\) is the offset frequency from the carrier.\n\n5. **Combine the Results**: Substitute \\( S_{V_{cont}}(f) \\) from step 2 into the equation in step 4 to get the final phase noise spectrum:\n   \\[\n   S_{\\phi}(f) = \\left( \\frac{K_{VCO}}{f} \\right)^2 \\cdot H_{LDO-VCO}(f) \\cdot S_{th}(f)\n   \\]\n\n### Example Calculation\n\nAssume:\n- \\( S_{th}(f) \\) is the thermal noise spectrum of the LDO.\n- \\( H_{LDO-VCO}(f) \\) is the transfer function from the LDO output to the VCO control voltage.\n- \\( K_{VCO} \\) is the VCO sensitivity.\n\nGiven these parameters, the phase noise at the VCO output can be computed as:\n\\[\nS_{\\phi}(f) = \\left( \\frac{K_{VCO}}{f} \\right)^2 \\cdot H_{LDO-VCO}(f) \\cdot S_{th}(f)\n\\]\n\nThis equation provides the phase noise spectrum at the VCO output due to the thermal noise generated by the LDO regulator.",
        "format": "markdown",
        "sha256": "f9d94dc254801fa4d23928affda3aa9e04cc6517c6fcd8cc5610787d13e90144"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It captures the general frequency-to-phase integration and uses a VCO sensitivity, but misses the circuit’s key mechanism: direct supply pushing on the varactors, described by Kpush = df/dVout. It instead assumes an LDO-to-control-voltage path, and its PSD transfer expression should use the squared magnitude of the transfer function.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1139,
        "output_tokens": 634,
        "total_tokens": 1773,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1139,
        "output_tokens": 634,
        "total_tokens": 1773,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise due to the thermal noise generated by the LDO regulator, follow these steps:\n\n1. **Determine the Noise Transfer Function**: Identify the transfer function from the LDO output noise to the VCO output phase noise. This involves understanding how the noise at \\( V_{out} \\) of the LDO affects the control voltage \\( V_{cont} \\) of the VCO and subsequently the phase noise of the VCO.\n\n2. **Calculate the Control Voltage Sensitivity**: Determine the sensitivity of the VCO frequency to the control voltage \\( V_{cont} \\). This is typically represented by the parameter \\( K_{VCO} \\) (Hz/V), which indicates how much the VCO frequency changes per unit change in control voltage.\n\n3. **Compute the Phase Noise Contribution**: Use the sensitivity \\( K_{VCO} \\) to translate the voltage noise spectrum \\( S_{th} \\) at \\( V_{out} \\) to phase noise. The phase noise \\( \\mathcal{L}(f) \\) at offset frequency \\( f \\) can be computed using the formula:\n   \\[\n   \\mathcal{L}(f) = \\left( \\frac{K_{VCO}}{f} \\right)^2 S_{th}(f)\n   \\]\n   where \\( S_{th}(f) \\) is the power spectral density of the thermal noise generated by the LDO at frequency \\( f \\).\n\n4. **Combine with Other Noise Sources**: If there are other noise sources affecting the VCO, combine their contributions to get the total phase noise. Typically, phase noise contributions from different sources are added in a power sum manner.\n\n### Example Calculation\n\nAssume the following parameters:\n- \\( K_{VCO} = 10^6 \\) Hz/V\n- \\( S_{th}(f) = 10^{-12} \\) V\\(^2\\)/Hz at a particular offset frequency \\( f \\)\n\nThe phase noise contribution at offset frequency \\( f \\) is:\n\\[\n\\mathcal{L}(f) = \\left( \\frac{10^6}{f} \\right)^2 \\times 10^{-12} = \\frac{10^{12}}{f^2} \\times 10^{-12} = \\frac{1}{f^2} \\text{ Hz}^{-1}\n\\]\n\nThis result indicates that the phase noise contribution from the LDO thermal noise decreases with the square of the offset frequency.\n\n### Summary\n\nTo compute the VCO output phase noise due to the LDO thermal noise:\n1. Identify the noise transfer function from the LDO to the VCO.\n2. Determine the VCO sensitivity \\( K_{VCO} \\).\n3. Use the formula \\( \\mathcal{L}(f) = \\left( \\frac{K_{VCO}}{f} \\right)^2 S_{th}(f) \\) to compute the phase noise.\n4. Combine with other noise sources if necessary.",
        "format": "markdown",
        "sha256": "6e987c9f88dc68f48729f4b2b961e90e28106c815cb2a3e39651eb40a6568524"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct 1/offset-frequency-squared conversion and a relevant sensitivity-based formula, but treats the LDO noise as changing the VCO control voltage and uses KVCO rather than identifying supply pushing and the relevant dfosc/dVout sensitivity. That misses the circuit’s key mechanism: the supply perturbation acts directly on the varactors.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1139,
        "output_tokens": 628,
        "total_tokens": 1767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1139,
        "output_tokens": 628,
        "total_tokens": 1767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise due to the thermal noise generated by the LDO regulator, follow these steps:\n\n1. **Determine the Noise Transfer Function**: Identify the transfer function from the LDO output noise to the VCO output phase noise. This involves understanding how the noise at \\( V_{out} \\) of the LDO affects the control voltage \\( V_{cont} \\) of the VCO and subsequently the phase noise of the VCO.\n\n2. **Calculate the Control Voltage Sensitivity**: Determine the sensitivity of the VCO frequency to the control voltage \\( V_{cont} \\). This is typically represented by the parameter \\( K_{VCO} \\) (Hz/V), which indicates how much the VCO frequency changes per unit change in control voltage.\n\n3. **Compute the Phase Noise Contribution**: Use the sensitivity \\( K_{VCO} \\) to translate the voltage noise spectrum \\( S_{th} \\) at \\( V_{out} \\) to phase noise. The phase noise \\( \\mathcal{L}(f) \\) at offset frequency \\( f \\) can be computed using the formula:\n   \\[\n   \\mathcal{L}(f) = \\left( \\frac{K_{VCO}}{f} \\right)^2 S_{th}(f)\n   \\]\n   where \\( S_{th}(f) \\) is the power spectral density of the thermal noise generated by the LDO at frequency \\( f \\).\n\n4. **Combine with Other Noise Sources**: If there are other noise sources affecting the VCO, combine their contributions to get the total phase noise. Typically, phase noise contributions from different sources are added in a power sum manner.\n\n### Example Calculation\n\nAssume the following parameters:\n- \\( K_{VCO} = 10^6 \\) Hz/V\n- \\( S_{th}(f) = 10^{-12} \\) V\\(^2\\)/Hz at a particular offset frequency \\( f \\)\n\nThe phase noise contribution at offset frequency \\( f \\) is:\n\\[\n\\mathcal{L}(f) = \\left( \\frac{10^6}{f} \\right)^2 \\times 10^{-12} = \\frac{10^{12}}{f^2} \\times 10^{-12} = \\frac{1}{f^2} \\text{ Hz}^{-1}\n\\]\n\nThis result indicates that the phase noise contribution from the LDO thermal noise decreases with the square of the offset frequency.\n\n### Summary\n\nTo compute the VCO output phase noise due to the LDO thermal noise:\n1. Identify the noise transfer function from the LDO to the VCO.\n2. Determine the VCO sensitivity \\( K_{VCO} \\).\n3. Use the formula \\( \\mathcal{L}(f) = \\left( \\frac{K_{VCO}}{f} \\right)^2 S_{th}(f) \\) to compute the phase noise.\n4. Combine with other noise sources if necessary.",
        "format": "markdown",
        "sha256": "6e987c9f88dc68f48729f4b2b961e90e28106c815cb2a3e39651eb40a6568524"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct 1/offset-frequency-squared conversion and a relevant sensitivity-based formula, but treats the LDO noise as changing the VCO control voltage and uses KVCO rather than identifying supply pushing and the relevant dfosc/dVout sensitivity. That misses the circuit’s key mechanism: the supply perturbation acts directly on the varactors.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1139,
        "output_tokens": 628,
        "total_tokens": 1767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1139,
        "output_tokens": 628,
        "total_tokens": 1767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor \\( C_T \\) to the tail node of the circuit shown in the figure can have a significant impact on the phase noise of the oscillator. \n\nThe tail capacitor \\( C_T \\) serves to filter out high-frequency noise from the current source \\( I_{SS} \\). This filtering effect reduces the noise that modulates the tail current, which in turn reduces the phase noise of the oscillator. \n\nIn more detail:\n1. **Noise Filtering**: The capacitor \\( C_T \\) provides a low impedance path for high-frequency noise components, effectively shunting them to ground. This reduces the amplitude of noise currents that can modulate the tail current.\n2. **Improved Symmetry**: By stabilizing the tail current, \\( C_T \\) helps maintain better symmetry in the differential pair (M1 and M2). Improved symmetry leads to more consistent switching and less jitter, which translates to lower phase noise.\n3. **Reduced Flicker Noise**: The capacitor can also help in reducing flicker noise (1/f noise) from the current source, which is a significant contributor to phase noise at low offset frequencies.\n\nOverall, the addition of \\( C_T \\) to the tail node generally results in a reduction of phase noise in the oscillator.",
        "format": "markdown",
        "sha256": "7af88087e29b09ddf69b17ab8733f73b12dd59a1e0b0efa1b7b701ea30736e87"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that adding CT generally reduces phase noise through filtering, missing the nonmonotonic effect and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 792,
        "output_tokens": 257,
        "total_tokens": 1049,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 792,
        "output_tokens": 257,
        "total_tokens": 1049,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor \\( C_T \\) to the tail node of the circuit shown in the figure can have a significant impact on the phase noise of the oscillator. \n\nThe tail capacitor \\( C_T \\) serves to filter out high-frequency noise from the tail current source \\( I_{SS} \\). This filtering effect reduces the noise that modulates the tail current, which in turn reduces the noise that affects the differential pair transistors \\( M_1 \\) and \\( M_2 \\). \n\nBy reducing the high-frequency noise at the tail node, the phase noise of the oscillator is improved. Specifically, the phase noise at frequencies far from the carrier (i.e., the far-out phase noise) is reduced. This is because the capacitor \\( C_T \\) helps to stabilize the current source and reduce the noise that would otherwise modulate the oscillation frequency.\n\nIn summary, adding \\( C_T \\) to the tail node generally results in a reduction of phase noise, particularly at frequencies far from the carrier.",
        "format": "markdown",
        "sha256": "2af6de67549d15e914aee74655e4d02cad1503da99efa271bc225776c24c67c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims CT generally improves phase noise by filtering tail-node noise, missing the nonmonotonic behavior and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 792,
        "output_tokens": 204,
        "total_tokens": 996,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 792,
        "output_tokens": 204,
        "total_tokens": 996,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor \\( C_T \\) to the tail node of the circuit shown in the figure can have a significant impact on the phase noise of the oscillator. \n\nThe tail capacitor \\( C_T \\) serves to filter out high-frequency noise from the tail current source \\( I_{SS} \\). This filtering effect reduces the noise that modulates the tail current, which in turn reduces the noise that affects the differential pair transistors \\( M_1 \\) and \\( M_2 \\). \n\nBy reducing the high-frequency noise at the tail node, the phase noise of the oscillator is improved. Specifically, the phase noise at frequencies far from the carrier (i.e., the far-out phase noise) is reduced. This is because the capacitor \\( C_T \\) helps to stabilize the current source and reduce the noise that would otherwise modulate the oscillation frequency.\n\nIn summary, adding \\( C_T \\) to the tail node generally results in a reduction of phase noise, particularly at frequencies far from the carrier.",
        "format": "markdown",
        "sha256": "2af6de67549d15e914aee74655e4d02cad1503da99efa271bc225776c24c67c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims CT generally improves phase noise by filtering tail-node noise, missing the nonmonotonic behavior and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 792,
        "output_tokens": 204,
        "total_tokens": 996,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 792,
        "output_tokens": 204,
        "total_tokens": 996,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a type of cross-coupled oscillator, often used in RF applications. The oscillation frequency of such a circuit can be estimated using the inductance (L) and the capacitance (C) in the circuit.\n\nThe oscillation frequency \\( f \\) is given by the formula:\n\n\\[ f = \\frac{1}{2\\pi\\sqrt{LC}} \\]\n\nWhere:\n- \\( L \\) is the inductance of the coils.\n- \\( C \\) is the capacitance of the capacitors.\n\nTo estimate the oscillation frequency, you need the values of the inductance and capacitance. If these values are not provided, you can use typical values for such circuits. For example, if the inductance \\( L \\) is 1 µH (microhenry) and the capacitance \\( C \\) is 1 pF (picofarad), the frequency can be calculated as follows:\n\n\\[ f = \\frac{1}{2\\pi\\sqrt{1 \\times 10^{-6} \\times 1 \\times 10^{-12}}} \\]\n\n\\[ f = \\frac{1}{2\\pi\\sqrt{10^{-18}}} \\]\n\n\\[ f = \\frac{1}{2\\pi \\times 10^{-9}} \\]\n\n\\[ f \\approx \\frac{1}{6.28 \\times 10^{-9}} \\]\n\n\\[ f \\approx 159 \\text{ MHz} \\]\n\nTherefore, with typical values of inductance and capacitance, the oscillation frequency is in the range of hundreds of MHz. For precise calculation, you need the exact values of \\( L \\) and \\( C \\) used in the circuit.",
        "format": "markdown",
        "sha256": "36a464893b11158080255604c1ddf500f04db3d90156b6a50d6098a76f1c9524"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly gives the tank’s uncoupled LC resonance, but misses the essential coupling-induced frequency shift that determines the oscillation frequency in this circuit.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 351,
        "total_tokens": 1475,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 351,
        "total_tokens": 1475,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a cross-coupled LC oscillator, which is commonly used in RF applications. The oscillation frequency of such a circuit can be estimated using the formula for the resonant frequency of an LC circuit:\n\n\\[ f = \\frac{1}{2\\pi\\sqrt{LC}} \\]\n\nWhere:\n- \\( f \\) is the oscillation frequency.\n- \\( L \\) is the inductance of the inductors.\n- \\( C \\) is the capacitance of the capacitors.\n\nIn the given circuit, there are two inductors and two capacitors in each stage. Assuming the inductors and capacitors are identical in each stage, the formula simplifies to:\n\n\\[ f = \\frac{1}{2\\pi\\sqrt{L_{\\text{total}}C_{\\text{total}}}} \\]\n\nWhere \\( L_{\\text{total}} \\) and \\( C_{\\text{total}} \\) are the effective inductance and capacitance seen by the circuit.\n\nIf the inductors \\( L \\) and capacitors \\( C \\) are given, you can plug in their values to find the oscillation frequency. If not, you would need to know the specific values of \\( L \\) and \\( C \\) to calculate the frequency.\n\nFor example, if each inductor is \\( 10 \\, \\mu H \\) and each capacitor is \\( 10 \\, pF \\):\n\n\\[ f = \\frac{1}{2\\pi\\sqrt{10 \\times 10^{-6} \\times 10 \\times 10^{-12}}} \\]\n\n\\[ f = \\frac{1}{2\\pi\\sqrt{10^{-17}}} \\]\n\n\\[ f = \\frac{1}{2\\pi \\times 10^{-8.5}} \\]\n\n\\[ f \\approx \\frac{1}{6.28 \\times 10^{-8.5}} \\]\n\n\\[ f \\approx 15.9 \\, \\text{MHz} \\]\n\nThis is a rough estimate, and the actual frequency may vary based on the exact values of the components and parasitic elements in the circuit.",
        "format": "markdown",
        "sha256": "6db2b530613befce80686a5f3e9d7cc9cf548afb29d68e634d9e87a2c4aaa090"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the tank resonance as a baseline, but omits the key coupling-induced frequency shift (approximately αω₀/(2Q)), so it does not estimate the circuit’s oscillation frequency as requested. The example also contains inconsistent intermediate arithmetic.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 436,
        "total_tokens": 1560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 436,
        "total_tokens": 1560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-2024-05-13",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a cross-coupled LC oscillator, which is commonly used in RF applications. The oscillation frequency of such a circuit is determined by the inductance (L) and the capacitance (C) in the LC tank circuit.\n\nThe oscillation frequency \\( f \\) can be estimated using the formula:\n\n\\[ f = \\frac{1}{2\\pi\\sqrt{LC}} \\]\n\nWhere:\n- \\( L \\) is the inductance of the coils.\n- \\( C \\) is the capacitance of the capacitors.\n\nTo provide a more specific estimate, the values of \\( L \\) and \\( C \\) need to be known. If these values are not provided, the exact frequency cannot be determined. However, the general form of the frequency calculation remains as shown above.",
        "format": "markdown",
        "sha256": "ae2553fc88b2331c56462a6db5217a8e0cb25ab44179dcbee85312b33a35e403"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the uncoupled LC tank resonance, but omits the key coupling-induced frequency shift, so it does not fully estimate this circuit’s oscillation frequency.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 164,
        "total_tokens": 1288,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1124,
        "output_tokens": 164,
        "total_tokens": 1288,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
