{
  "model_key": "gpt_4o_mini",
  "display_name": "GPT-4o Mini",
  "provider": "openai",
  "evaluation_model_ids": [],
  "thinking_effort": "default",
  "configuration_note": "GPT-4o Mini answered the 50 tasks in three rollouts through OpenRouter's chat completions route (openai/gpt-4o-mini-2024-07-18) without reasoning (the model has no reasoning setting). Requests set temperature to 0 and max_tokens to 16,384, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for GPT-4o Mini on 2026-11-10 ($0.15 input, $0.075 cached input, $0.60 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 7,
          "incorrect_count": 143,
          "partial_credit_count": 77,
          "zero_count": 66,
          "mean_score_0_to_4": 1.0266666666666666,
          "score_percent": 25.666666666666664,
          "score_distribution": {
            "0": 66,
            "1": 43,
            "2": 19,
            "3": 15,
            "4": 7
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 7,
          "incorrect_count": 143,
          "partial_credit_count": 77,
          "zero_count": 66,
          "mean_score_0_to_4": 1.0266666666666666,
          "score_percent": 25.666666666666664,
          "score_distribution": {
            "0": 66,
            "1": 43,
            "2": 19,
            "3": 15,
            "4": 7
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 6,
          "incorrect_count": 84,
          "partial_credit_count": 38,
          "zero_count": 46,
          "mean_score_0_to_4": 0.9,
          "score_percent": 22.5,
          "score_distribution": {
            "0": 46,
            "1": 23,
            "2": 11,
            "3": 4,
            "4": 6
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 6,
          "incorrect_count": 84,
          "partial_credit_count": 38,
          "zero_count": 46,
          "mean_score_0_to_4": 0.9,
          "score_percent": 22.5,
          "score_distribution": {
            "0": 46,
            "1": 23,
            "2": 11,
            "3": 4,
            "4": 6
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 1,
          "incorrect_count": 59,
          "partial_credit_count": 39,
          "zero_count": 20,
          "mean_score_0_to_4": 1.2166666666666666,
          "score_percent": 30.416666666666664,
          "score_distribution": {
            "0": 20,
            "1": 20,
            "2": 8,
            "3": 11,
            "4": 1
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 1,
          "incorrect_count": 59,
          "partial_credit_count": 39,
          "zero_count": 20,
          "mean_score_0_to_4": 1.2166666666666666,
          "score_percent": 30.416666666666664,
          "score_distribution": {
            "0": 20,
            "1": 20,
            "2": 8,
            "3": 11,
            "4": 1
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 3,
        "incorrect_count": 47,
        "partial_credit_count": 27,
        "zero_count": 20,
        "mean_score_0_to_4": 1.08,
        "score_percent": 27.0,
        "score_distribution": {
          "0": 20,
          "1": 16,
          "2": 7,
          "3": 4,
          "4": 3
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 2,
        "incorrect_count": 48,
        "partial_credit_count": 25,
        "zero_count": 23,
        "mean_score_0_to_4": 0.98,
        "score_percent": 24.5,
        "score_distribution": {
          "0": 23,
          "1": 15,
          "2": 4,
          "3": 6,
          "4": 2
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 2,
        "incorrect_count": 48,
        "partial_credit_count": 25,
        "zero_count": 23,
        "mean_score_0_to_4": 1.02,
        "score_percent": 25.5,
        "score_distribution": {
          "0": 23,
          "1": 12,
          "2": 8,
          "3": 5,
          "4": 2
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 1203840,
        "input_tokens": 4117710,
        "output_tokens": 56290,
        "total_tokens": 4174000
      },
      "known_totals": {
        "cached_input_tokens": 1203840,
        "input_tokens": 4117710,
        "output_tokens": 56290,
        "total_tokens": 4174000
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 3,
          "incorrect_count": 27,
          "partial_credit_count": 12,
          "zero_count": 15,
          "mean_score_0_to_4": 0.9666666666666667,
          "score_percent": 24.166666666666668,
          "score_distribution": {
            "0": 15,
            "1": 7,
            "2": 5,
            "4": 3
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 2,
          "incorrect_count": 28,
          "partial_credit_count": 13,
          "zero_count": 15,
          "mean_score_0_to_4": 0.9,
          "score_percent": 22.5,
          "score_distribution": {
            "0": 15,
            "1": 9,
            "2": 2,
            "3": 2,
            "4": 2
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 1,
          "incorrect_count": 29,
          "partial_credit_count": 13,
          "zero_count": 16,
          "mean_score_0_to_4": 0.8333333333333334,
          "score_percent": 20.833333333333336,
          "score_distribution": {
            "0": 16,
            "1": 7,
            "2": 4,
            "3": 2,
            "4": 1
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 0,
          "incorrect_count": 20,
          "partial_credit_count": 15,
          "zero_count": 5,
          "mean_score_0_to_4": 1.25,
          "score_percent": 31.25,
          "score_distribution": {
            "0": 5,
            "1": 9,
            "2": 2,
            "3": 4
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 0,
          "incorrect_count": 20,
          "partial_credit_count": 12,
          "zero_count": 8,
          "mean_score_0_to_4": 1.1,
          "score_percent": 27.500000000000004,
          "score_distribution": {
            "0": 8,
            "1": 6,
            "2": 2,
            "3": 4
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 1,
          "incorrect_count": 19,
          "partial_credit_count": 12,
          "zero_count": 7,
          "mean_score_0_to_4": 1.3,
          "score_percent": 32.5,
          "score_distribution": {
            "0": 7,
            "1": 5,
            "2": 4,
            "3": 3,
            "4": 1
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is defined as the product of its transconductance (\\(g_m\\)) and its output conductance (\\(g_{ds}\\)). The intrinsic gain can be expressed as:\n\n\\[\nA_{intrinsic} = \\frac{g_m}{g_{ds}}\n\\]\n\nWhen you double the length and width of a MOSFET, several parameters change:\n\n1. **Transconductance (\\(g_m\\))**: The transconductance is proportional to the width (\\(W\\)) of the MOSFET and inversely proportional to the length (\\(L\\)). Specifically, it can be approximated as:\n\n   \\[\n   g_m \\propto \\frac{W}{L}\n   \\]\n\n   If both \\(W\\) and \\(L\\) are doubled, then:\n\n   \\[\n   g_m \\propto \\frac{2W}{2L} = \\frac{W}{L}\n   \\]\n\n   Thus, \\(g_m\\) remains approximately the same.\n\n2. **Output conductance (\\(g_{ds}\\))**: The output conductance is influenced by the channel length modulation effect and is generally inversely proportional to the length of the MOSFET. Therefore, it can be approximated as:\n\n   \\[\n   g_{ds} \\propto \\frac{1}{L}\n   \\]\n\n   If the length is doubled, then:\n\n   \\[\n   g_{ds} \\propto \\frac{1}{2L}\n   \\]\n\n   This means that \\(g_{ds}\\) is halved.\n\nNow, substituting these changes into the intrinsic gain formula:\n\n\\[\nA_{intrinsic} = \\frac{g_m}{g_{ds}} \\approx \\frac{g_m}{\\frac{1}{2L}} = 2 \\cdot g_m \\cdot L\n\\]\n\nSince \\(g_m\\) remains approximately the same and \\(g_{ds}\\) is halved, the intrinsic gain effectively doubles when both the length and width of the MOSFET are doubled.\n\nIn summary, if you double the length and width of a MOSFET, the intrinsic gain approximately **doubles**.",
        "format": "markdown",
        "sha256": "08c7d3c9aab638061c27b55f23e941ebe2a26e35a544a43ebaa36dc8293798b2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: doubling both dimensions leaves W/L and gm unchanged, while the longer channel reduces gds (increases ro) by about a factor of two. The reasoning is consistent with the usual fixed-overdrive bias assumption.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 456,
        "total_tokens": 483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 456,
        "total_tokens": 483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET, often represented as \\( A_{v} \\), is primarily determined by the transconductance (\\( g_m \\)) and the output conductance (\\( g_{ds} \\)). The intrinsic gain can be expressed as:\n\n\\[\nA_{v} = \\frac{g_m}{g_{ds}}\n\\]\n\nWhen you double the length and width of a MOSFET, several factors come into play:\n\n1. **Transconductance (\\( g_m \\))**: The transconductance is proportional to the width of the MOSFET and inversely proportional to the length. Specifically, for a long-channel MOSFET, \\( g_m \\) can be approximated as:\n\n   \\[\n   g_m \\propto \\frac{W}{L}\n   \\]\n\n   If you double both the width (\\( W \\)) and the length (\\( L \\)), the new transconductance becomes:\n\n   \\[\n   g_m' \\propto \\frac{2W}{2L} = \\frac{W}{L} \\quad \\text{(no change)}\n   \\]\n\n2. **Output Conductance (\\( g_{ds} \\))**: The output conductance is generally influenced by the channel length modulation effect and can be approximated as:\n\n   \\[\n   g_{ds} \\propto \\frac{1}{L}\n   \\]\n\n   When you double the length, the new output conductance becomes:\n\n   \\[\n   g_{ds}' \\propto \\frac{1}{2L} \\quad \\text{(decreases)}\n   \\]\n\nNow, substituting these changes into the intrinsic gain formula:\n\n\\[\nA_{v}' = \\frac{g_m'}{g_{ds}'} = \\frac{g_m}{g_{ds}/2} = 2 \\cdot \\frac{g_m}{g_{ds}} = 2A_{v}\n\\]\n\nThus, when you double both the length and width of a MOSFET, the intrinsic gain \\( A_{v} \\) effectively doubles.",
        "format": "markdown",
        "sha256": "ca13c35238db6bc6481fc4a42cb5d3de6313ec98d89e13a3a176c4946a0247cc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly predicts that intrinsic gain approximately doubles: W/L and gm stay unchanged while the longer channel reduces output conductance. However, these scalings assume a suitable fixed bias condition, which the answer does not state; the result is not unconditional.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 434,
        "total_tokens": 461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 434,
        "total_tokens": 461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is defined as the product of its transconductance (\\(g_m\\)) and its output conductance (\\(g_{ds}\\)). The intrinsic gain can be expressed as:\n\n\\[\nA_{intrinsic} = \\frac{g_m}{g_{ds}}\n\\]\n\nWhen you double the length and width of a MOSFET, several parameters change:\n\n1. **Transconductance (\\(g_m\\))**: The transconductance is proportional to the width (\\(W\\)) of the MOSFET and inversely proportional to the length (\\(L\\)). Specifically, it can be approximated as:\n\n   \\[\n   g_m \\propto \\frac{W}{L}\n   \\]\n\n   If both \\(W\\) and \\(L\\) are doubled, then:\n\n   \\[\n   g_m \\propto \\frac{2W}{2L} = \\frac{W}{L}\n   \\]\n\n   Thus, \\(g_m\\) remains approximately the same.\n\n2. **Output conductance (\\(g_{ds}\\))**: The output conductance is typically influenced by the channel length modulation effect and can be approximated as:\n\n   \\[\n   g_{ds} \\propto \\frac{1}{L}\n   \\]\n\n   If the length is doubled, then:\n\n   \\[\n   g_{ds} \\propto \\frac{1}{2L}\n   \\]\n\n   This means that \\(g_{ds}\\) is halved.\n\nNow, substituting these changes into the intrinsic gain formula:\n\n\\[\nA_{intrinsic} = \\frac{g_m}{g_{ds}} \\approx \\frac{g_m}{\\frac{1}{2}g_{ds}} = 2 \\cdot \\frac{g_m}{g_{ds}} = 2 \\cdot A_{intrinsic, original}\n\\]\n\nThus, when you double both the length and width of a MOSFET, the intrinsic gain approximately doubles.",
        "format": "markdown",
        "sha256": "e4523b8dfd408435c1d73d5fb10a8ee9246646f222cc24571c28cd997bb2cd7b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly concludes that doubling both dimensions leaves gm roughly unchanged, halves gds, and doubles intrinsic gain. The main omission is the fixed-overdrive/current bias assumption required for those scaling relations.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 416,
        "total_tokens": 443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 416,
        "total_tokens": 443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Student A is correct. The transconductance (\\(g_m\\)) of a MOSFET increases as the overdrive voltage (also known as the gate-source voltage minus the threshold voltage, \\(V_{ov} = V_{GS} - V_{TH}\\)) increases.\n\nTransconductance is defined as the change in the drain current (\\(I_D\\)) with respect to the change in gate-source voltage (\\(V_{GS}\\)), while keeping the drain-source voltage (\\(V_{DS}\\)) constant. Mathematically, it can be expressed as:\n\n\\[\ng_m = \\frac{dI_D}{dV_{GS}}\n\\]\n\nIn the saturation region of operation, the drain current can be approximated by:\n\n\\[\nI_D \\approx \\frac{1}{2} k_n (V_{GS} - V_{TH})^2\n\\]\n\nwhere \\(k_n\\) is a process transconductance parameter. As the overdrive voltage \\(V_{ov}\\) increases, the drain current \\(I_D\\) increases, leading to a higher transconductance \\(g_m\\). Specifically, \\(g_m\\) can be expressed as:\n\n\\[\ng_m = k_n (V_{GS} - V_{TH}) = k_n V_{ov}\n\\]\n\nThus, as \\(V_{ov}\\) increases, \\(g_m\\) also increases. Therefore, Student A is correct in stating that the transconductance of a MOSFET goes up as the overdrive voltage increases.",
        "format": "markdown",
        "sha256": "35be1e5368659b43f826be4bd500370750f5849b9d8b4e3430a35f67fc8e0fe5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A and derives that, with the device parameter held fixed, gm = kn Vov increases as overdrive rises.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 314,
        "total_tokens": 353,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 314,
        "total_tokens": 353,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Student A is correct. The transconductance (\\(g_m\\)) of a MOSFET increases as the overdrive voltage (also known as the gate-source voltage minus the threshold voltage, \\(V_{GS} - V_{TH}\\)) increases. \n\nTransconductance is defined as the change in the drain current (\\(I_D\\)) with respect to the change in gate-source voltage (\\(V_{GS}\\)), while keeping the drain-source voltage (\\(V_{DS}\\)) constant. Mathematically, it can be expressed as:\n\n\\[\ng_m = \\frac{dI_D}{dV_{GS}}\n\\]\n\nIn the saturation region of operation, the drain current can be approximated by:\n\n\\[\nI_D = \\frac{1}{2} k_n (V_{GS} - V_{TH})^2\n\\]\n\nwhere \\(k_n\\) is a process transconductance parameter. As the overdrive voltage increases, the drain current increases, and consequently, the transconductance also increases. \n\nThus, as the overdrive voltage increases, the transconductance \\(g_m\\) increases, confirming that Student A is correct.",
        "format": "markdown",
        "sha256": "94dba3bb2391b1ca75fa3ac3ba53794ae36f0aa3ca460d4f5baa2fbec70ebd4a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A and uses the square-law current relation with fixed device parameter k_n, showing that increasing overdrive raises drain current and transconductance. Discussing Student B’s fixed-current condition is not required.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 240,
        "total_tokens": 279,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 240,
        "total_tokens": 279,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Student A is correct. The transconductance (\\(g_m\\)) of a MOSFET increases as the overdrive voltage (also known as the gate-source voltage minus the threshold voltage, \\(V_{GS} - V_{TH}\\)) increases. \n\nTransconductance is defined as the change in the drain current (\\(I_D\\)) with respect to the change in gate-source voltage (\\(V_{GS}\\)), while keeping the drain-source voltage (\\(V_{DS}\\)) constant. Mathematically, it can be expressed as:\n\n\\[\ng_m = \\frac{dI_D}{dV_{GS}}\n\\]\n\nIn the saturation region of operation, the drain current can be approximated by:\n\n\\[\nI_D = \\frac{1}{2} k_n (V_{GS} - V_{TH})^2\n\\]\n\nwhere \\(k_n\\) is a process transconductance parameter. As the overdrive voltage increases, the term \\((V_{GS} - V_{TH})\\) increases, leading to a higher drain current and thus a higher transconductance. \n\nTherefore, as the overdrive voltage increases, the transconductance \\(g_m\\) also increases, confirming that Student A is correct.",
        "format": "markdown",
        "sha256": "2a739e14d7cc273ec8568fba463226bc79b890b3a62651e165d3a2eeadb911a5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A and derives that, for fixed device parameters, the square-law model gives increasing current and transconductance as overdrive rises. Discussing Student B’s fixed-current condition is not required.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 257,
        "total_tokens": 296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 257,
        "total_tokens": 296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal models of PMOS and NMOS devices are similar in structure but not identical due to the differences in their operation and characteristics. Both devices can be modeled using similar parameters, but the signs and some specific parameters will differ.\n\n### Key Differences:\n\n1. **Transconductance (g_m)**:\n   - For NMOS, the transconductance \\( g_m \\) is defined as \\( g_m = \\frac{dI_D}{dV_{GS}} \\) (where \\( I_D \\) is the drain current and \\( V_{GS} \\) is the gate-source voltage).\n   - For PMOS, it is defined similarly but with opposite polarity since PMOS devices conduct when the gate-source voltage is negative relative to the source.\n\n2. **Threshold Voltage (V_th)**:\n   - NMOS devices have a positive threshold voltage, while PMOS devices have a negative threshold voltage. This affects the biasing conditions and the small-signal parameters.\n\n3. **Current Direction**:\n   - The direction of current flow is opposite for NMOS and PMOS devices. NMOS devices conduct from drain to source, while PMOS devices conduct from source to drain.\n\n4. **Small-Signal Parameters**:\n   - The small-signal output resistance \\( r_o \\) and other parameters may also differ due to the different physical characteristics of the devices.\n\n### Similarities:\n- Both devices can be represented using similar small-signal equivalent circuits, typically involving a transconductance element (g_m) and an output resistance (r_o).\n- The small-signal models can be used in similar ways for circuit analysis, such as in amplifiers, but care must be taken to account for the differences in polarity and characteristics.\n\n### Conclusion:\nWhile the small-signal models of PMOS and NMOS devices share a similar framework, they are not identical due to the differences in their electrical characteristics and operation. When analyzing circuits that include both types of transistors, it is essential to consider these differences.",
        "format": "markdown",
        "sha256": "152088e5c1e4c95a9d24b509e5d64dfcffcd2b217886ee6fda6a6633d32e27f5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that the models share the same basic structure and that polarity conventions differ, but its conclusion that they are not identical contradicts the key result: with consistent polarities, they have the same small-signal form.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 409,
        "total_tokens": 436,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 409,
        "total_tokens": 436,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal models of PMOS and NMOS devices are similar in structure but not identical due to the differences in their operation and characteristics. Both devices can be modeled using similar parameters, but the signs and values of these parameters differ because of the opposite polarities of the carriers involved (holes for PMOS and electrons for NMOS).\n\nHere are some key points of comparison:\n\n1. **Transconductance (gm)**: The transconductance for both devices is defined as the change in drain current with respect to the change in gate-source voltage. However, the sign of \\( g_m \\) is positive for NMOS and negative for PMOS, reflecting the direction of current flow.\n\n2. **Output Conductance (gds)**: The output conductance, which represents the change in drain current with respect to the change in drain-source voltage, is also present in both models. The values may differ based on the device characteristics, but the concept remains the same.\n\n3. **Small-Signal Parameters**: The small-signal parameters such as \\( r_o \\) (output resistance) and \\( g_m \\) are defined similarly, but their values and signs will differ based on whether the device is NMOS or PMOS.\n\n4. **Circuit Configuration**: When using these devices in circuits, the configurations may also differ due to the complementary nature of PMOS and NMOS devices in CMOS technology. For example, PMOS devices are typically used in the pull-up network, while NMOS devices are used in the pull-down network.\n\nIn summary, while the small-signal models of PMOS and NMOS devices share a similar mathematical structure, they are not identical due to the differences in the type of charge carriers and the resulting electrical characteristics.",
        "format": "markdown",
        "sha256": "fb8805bf314c8a838a636f612ee4cc2d2e72d12afb0b569492ba653c62942b4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It recognizes that the models share the same basic structure, but overstates that they are nonidentical and treats the PMOS gm sign as intrinsic rather than dependent on polarity conventions. The correct point is that the model has the same form with consistent sign conventions.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 354,
        "total_tokens": 381,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 354,
        "total_tokens": 381,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal models of PMOS and NMOS devices are similar in structure but not identical due to the differences in their operation and characteristics. Both types of transistors can be modeled using similar parameters, but the signs and values of these parameters differ because of the opposite polarities of the carriers involved (holes for PMOS and electrons for NMOS).\n\nHere are some key points of comparison:\n\n1. **Transconductance (gm)**: The transconductance for both PMOS and NMOS devices is defined as the change in drain current (Id) with respect to the change in gate-source voltage (Vgs) at a constant drain-source voltage (Vds). However, the sign of gm will be negative for PMOS devices (since an increase in Vgs leads to a decrease in Id) and positive for NMOS devices.\n\n2. **Output Conductance (gds)**: The output conductance, which represents the change in drain current with respect to the change in drain-source voltage (Vds) at a constant gate-source voltage (Vgs), is also present in both models. The sign and value will depend on the specific characteristics of the device.\n\n3. **Small-Signal Parameters**: The small-signal parameters such as the gate capacitance, output capacitance, and body effect will also differ between PMOS and NMOS devices due to their different physical structures and operating principles.\n\n4. **Circuit Representation**: In circuit diagrams, the small-signal model for PMOS will typically have the source connected to a higher potential than the drain, while for NMOS, the source is connected to a lower potential than the drain.\n\nIn summary, while the small-signal models of PMOS and NMOS devices share a similar framework, they are not identical due to the differences in their operation, the nature of charge carriers, and the resulting parameters.",
        "format": "markdown",
        "sha256": "acbcb13289c2a8bf94486c1dec6296262eb3e9ac2adda23d06505b3f7584485f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that the models share a structure and analogous elements, but explicitly concludes they are not identical. With consistent source-referenced polarities, the PMOS model has the same form; the sign differences cited do not require a different model.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 378,
        "total_tokens": 405,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 378,
        "total_tokens": 405,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the circuit with respect to \\( I_X \\) and \\( V_X \\), we can follow these steps:\n\n1. **Identify Components**: The circuit consists of a current source \\( I_X \\), a transistor \\( M_1 \\), and a voltage source \\( V_X \\).\n\n2. **Current \\( I_X \\)**: This is the current flowing through the circuit. It is defined as the current that flows out of the node connected to the transistor \\( M_1 \\).\n\n3. **Voltage \\( V_X \\)**: This is the voltage across the voltage source. It is measured from the positive terminal to the negative terminal.\n\n4. **Relationship**: The behavior of \\( I_X \\) and \\( V_X \\) will depend on the characteristics of the transistor \\( M_1 \\). If \\( M_1 \\) is in the active region, it will control the current \\( I_X \\) based on the input voltage and the transistor's parameters.\n\n5. **Analysis**: \n   - If \\( M_1 \\) is a bipolar junction transistor (BJT), the relationship between \\( I_X \\) and \\( V_X \\) can be described using the transistor's current gain and the base-emitter voltage.\n   - If \\( M_1 \\) is a MOSFET, the relationship will depend on the gate-source voltage and the threshold voltage.\n\n6. **Equations**: Depending on the type of transistor, you can use the appropriate equations to relate \\( I_X \\) and \\( V_X \\):\n   - For a BJT: \\( I_C = \\beta I_B \\) and \\( V_{BE} \\approx 0.7V \\) for silicon transistors.\n   - For a MOSFET: \\( I_D = k(V_{GS} - V_{th})^2 \\) for \\( V_{GS} > V_{th} \\).\n\n7. **Conclusion**: The specific relationship between \\( I_X \\) and \\( V_X \\) will depend on the operating conditions of the transistor \\( M_1 \\) and the values of the components in the circuit.\n\nIf you have specific values or conditions for the circuit, I can help you derive more detailed relationships or calculations!",
        "format": "markdown",
        "sha256": "0849f146b89bf14c681c7f3149d0dc0e1a32650c2d2a8e5b955ed4378caf9b6d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer does not identify the diode-connected NMOS or sketch the required curve: near-zero current below threshold and a quadratic rise above it. It mentions a generic MOSFET square-law relation, but leaves the result conditional and even treats the device as possibly a BJT.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36853,
        "output_tokens": 461,
        "total_tokens": 37314,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36853,
        "output_tokens": 461,
        "total_tokens": 37314,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the circuit with respect to \\( I_X \\) and \\( V_X \\), we can follow these steps:\n\n1. **Identify Components**: The circuit consists of a current source \\( I_X \\), a transistor \\( M_1 \\), and a voltage source \\( V_X \\).\n\n2. **Current \\( I_X \\)**: This is the current flowing through the circuit. It is defined as the current supplied by the current source \\( I_X \\).\n\n3. **Voltage \\( V_X \\)**: This is the voltage across the voltage source \\( V_X \\). It is measured from the positive terminal to the negative terminal.\n\n4. **Relationship**: The behavior of \\( I_X \\) and \\( V_X \\) will depend on the characteristics of the transistor \\( M_1 \\). If \\( M_1 \\) is in the active region, it will control the relationship between \\( I_X \\) and \\( V_X \\).\n\n5. **Analysis**:\n   - If \\( M_1 \\) is a bipolar junction transistor (BJT), the relationship can be described using the transistor's current gain (\\( \\beta \\)).\n   - If \\( M_1 \\) is a field-effect transistor (FET), the relationship will depend on the gate-source voltage and the characteristics of the FET.\n\n6. **Equations**: Depending on the type of transistor, you may use different equations to relate \\( I_X \\) and \\( V_X \\):\n   - For a BJT: \\( I_C = \\beta I_B \\) and \\( V_{CE} \\) can be derived from the load line.\n   - For a FET: \\( I_D \\) can be expressed in terms of \\( V_{GS} \\) and \\( V_{DS} \\).\n\n7. **Conclusion**: The exact relationship between \\( I_X \\) and \\( V_X \\) will depend on the specific parameters of the transistor and the circuit configuration. You may need to apply Kirchhoff's laws or other circuit analysis techniques to derive specific values or relationships.\n\nIf you have specific values or parameters for the components, I can help you derive more detailed equations or relationships!",
        "format": "markdown",
        "sha256": "2d477006844f299ef575ee701e30c0c2529a26438c9af4ba2532f45ded2dd169"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer does not sketch or state the I_X–V_X behavior and fails to identify the diode-connected NMOS; its generic BJT/FET discussion provides no usable answer.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36853,
        "output_tokens": 446,
        "total_tokens": 37299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36853,
        "output_tokens": 446,
        "total_tokens": 37299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the circuit with respect to \\( I_X \\) and \\( V_X \\), we can follow these steps:\n\n1. **Identify Components**: The circuit consists of a current source \\( I_X \\), a transistor \\( M_1 \\), and a voltage source \\( V_X \\).\n\n2. **Current \\( I_X \\)**: This is the current flowing through the circuit. It is defined as the current supplied by the source \\( I_X \\) and will depend on the characteristics of the transistor \\( M_1 \\).\n\n3. **Voltage \\( V_X \\)**: This is the voltage across the voltage source in the circuit. It is influenced by the current flowing through the transistor and the characteristics of the circuit components.\n\n4. **Transistor Behavior**: Depending on whether \\( M_1 \\) is in the active, cutoff, or saturation region, the relationship between \\( I_X \\) and \\( V_X \\) will vary. \n\n5. **KCL and KVL**: Apply Kirchhoff's Current Law (KCL) and Kirchhoff's Voltage Law (KVL) to derive equations relating \\( I_X \\) and \\( V_X \\).\n\n### Summary of Relationships:\n- If \\( M_1 \\) is in the active region, \\( I_X \\) can be expressed in terms of \\( V_X \\) using the transistor's characteristics (e.g., \\( I_C = \\beta I_B \\)).\n- If \\( M_1 \\) is in saturation, \\( I_X \\) may be limited by \\( V_X \\) and the saturation current.\n\n### Conclusion:\nTo fully analyze the circuit, you would need the specific parameters of the transistor \\( M_1 \\) and any additional resistances or components in the circuit. This will allow you to derive precise equations for \\( I_X \\) and \\( V_X \\).",
        "format": "markdown",
        "sha256": "c0382f303cb6a542a4714c73b86e69304df1d46d57c0829ab14356d25c48c351"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit and gives no I_X-versus-V_X result; it misses the diode-connected NMOS and its near-zero current below threshold followed by a quadratic rise above threshold.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36853,
        "output_tokens": 380,
        "total_tokens": 37233,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36853,
        "output_tokens": 380,
        "total_tokens": 37233,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the circuit and sketch \\( I_x \\) versus \\( V_x \\), we need to consider the relationship between the input voltage \\( V_x \\) and the output current \\( I_x \\) through the transistor \\( M_1 \\).\n\n### Steps to Sketch \\( I_x \\) vs. \\( V_x \\):\n\n1. **Identify the Operating Regions of the Transistor**:\n   - **Cut-off Region**: When \\( V_x \\) is below a certain threshold (let's say \\( V_{th} \\)), the transistor \\( M_1 \\) is off, and \\( I_x = 0 \\).\n   - **Saturation Region**: As \\( V_x \\) increases beyond \\( V_{th} \\), the transistor turns on, and \\( I_x \\) increases. This region is characterized by a linear or quadratic relationship depending on the transistor model.\n   - **Active Region**: If \\( V_x \\) continues to increase, \\( I_x \\) may reach a maximum value determined by the circuit parameters.\n\n2. **Sketch the Graph**:\n   - **X-axis**: \\( V_x \\)\n   - **Y-axis**: \\( I_x \\)\n   - Start from the origin (0,0) and draw a horizontal line at \\( I_x = 0 \\) until \\( V_x = V_{th} \\).\n   - After \\( V_{th} \\), draw a curve that rises steeply (indicating increasing \\( I_x \\) with increasing \\( V_x \\)) until it levels off as it approaches the saturation current.\n\n### Example Sketch Description:\n- **Region 1**: \\( V_x < V_{th} \\) → \\( I_x = 0 \\)\n- **Region 2**: \\( V_{th} < V_x < V_{max} \\) → \\( I_x \\) increases (non-linear).\n- **Region 3**: \\( V_x \\geq V_{max} \\) → \\( I_x \\) levels off at a maximum value.\n\nThis sketch will help visualize how the output current \\( I_x \\) responds to changes in the input voltage \\( V_x \\) in the given circuit.",
        "format": "markdown",
        "sha256": "e772063680eb63c82e7df1a1e31a9b1c1479c8818c13591a65da3b89efb7ff1e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies cutoff below threshold and increasing current once the device turns on, but misses the key region transition: with the drain fixed at 1 V, the current changes from quadratic to roughly linear in the triode region rather than leveling off at a maximum.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36854,
        "output_tokens": 453,
        "total_tokens": 37307,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36854,
        "output_tokens": 453,
        "total_tokens": 37307,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the circuit and sketch \\( I_x \\) versus \\( V_x \\), we need to consider the behavior of the components involved, particularly the voltage source \\( V_x \\) and the MOSFET \\( M_1 \\).\n\n### Steps to Sketch \\( I_x \\) vs. \\( V_x \\):\n\n1. **Identify the Regions of Operation for \\( M_1 \\)**:\n   - **Cut-off Region**: When \\( V_x < V_{th} \\) (threshold voltage), the MOSFET is off, and \\( I_x = 0 \\).\n   - **Triode Region**: When \\( V_{th} < V_x < V_{ds(max)} \\), the MOSFET operates in the linear region, and \\( I_x \\) increases with \\( V_x \\).\n   - **Saturation Region**: When \\( V_x \\) exceeds \\( V_{ds(max)} \\), \\( I_x \\) reaches a constant value determined by the characteristics of the MOSFET.\n\n2. **Plotting the Graph**:\n   - **X-axis**: \\( V_x \\)\n   - **Y-axis**: \\( I_x \\)\n\n3. **Regions**:\n   - **Region 1 (Cut-off)**: For \\( V_x < V_{th} \\), \\( I_x = 0 \\).\n   - **Region 2 (Triode)**: For \\( V_{th} < V_x < V_{ds(max)} \\), \\( I_x \\) increases linearly or quadratically depending on the MOSFET characteristics.\n   - **Region 3 (Saturation)**: For \\( V_x \\geq V_{ds(max)} \\), \\( I_x \\) levels off to a constant value.\n\n### Example Sketch:\n- Start at the origin (0,0).\n- Draw a horizontal line along the x-axis until reaching \\( V_{th} \\).\n- From \\( V_{th} \\), draw a curve that rises steeply (indicating increasing \\( I_x \\)) until it reaches \\( V_{ds(max)} \\).\n- After \\( V_{ds(max)} \\), draw a horizontal line indicating that \\( I_x \\) remains constant.\n\n### Conclusion:\nThe resulting graph will show a clear transition from zero current to increasing current and then to a constant current as \\( V_x \\) increases. This behavior is typical for MOSFETs in circuits.",
        "format": "markdown",
        "sha256": "ee07e33e233bbc14f9a8fc6dae55d328784abb178308950ff41b33488ced0d76"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies cutoff below threshold, but reverses the operating regions: the device is in saturation first and enters triode as VX rises further. The claimed current leveling off therefore contradicts the required roughly linear rise.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36854,
        "output_tokens": 497,
        "total_tokens": 37351,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36854,
        "output_tokens": 497,
        "total_tokens": 37351,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the circuit and sketch \\( I_x \\) versus \\( V_x \\), we need to consider the relationship between the input voltage \\( V_x \\) and the output current \\( I_x \\) through the transistor \\( M_1 \\).\n\n### Steps to Sketch \\( I_x \\) vs. \\( V_x \\):\n\n1. **Identify the Operating Regions of the Transistor**:\n   - **Cut-off Region**: When \\( V_x \\) is below a certain threshold (let's say \\( V_{th} \\)), the transistor \\( M_1 \\) is off, and \\( I_x = 0 \\).\n   - **Saturation Region**: As \\( V_x \\) increases beyond \\( V_{th} \\), the transistor turns on, and \\( I_x \\) increases. This region is characterized by a linear or quadratic relationship depending on the transistor model.\n   - **Active Region**: If \\( M_1 \\) is a MOSFET, it will operate in this region where \\( I_x \\) is proportional to \\( (V_x - V_{th})^2 \\) for a certain range of \\( V_x \\).\n\n2. **Sketch the Graph**:\n   - Start with the horizontal axis representing \\( V_x \\) and the vertical axis representing \\( I_x \\).\n   - Draw a flat line at \\( I_x = 0 \\) for \\( V_x < V_{th} \\).\n   - As \\( V_x \\) crosses \\( V_{th} \\), draw a curve that rises steeply, indicating that \\( I_x \\) increases with \\( V_x \\).\n   - Depending on the characteristics of \\( M_1 \\), the curve may level off or continue to rise as \\( V_x \\) increases.\n\n### Example Sketch Description:\n- **X-axis**: \\( V_x \\) (Voltage)\n- **Y-axis**: \\( I_x \\) (Current)\n- **Region 1**: Flat line at \\( I_x = 0 \\) for \\( V_x < V_{th} \\).\n- **Region 2**: A rising curve starting from \\( V_{th} \\) indicating increasing \\( I_x \\) as \\( V_x \\) increases.\n\nThis sketch will help visualize how the output current \\( I_x \\) responds to changes in the input voltage \\( V_x \\) in the given circuit.",
        "format": "markdown",
        "sha256": "e68e4770dd91e18f780239a21f32180149a4d96fd8e9aa640e87247e68ae94a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies cutoff below threshold and a rising, approximately quadratic current over part of the range, but misses the key transition at Vx = Vth + 1 V to roughly linear triode-region behavior.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36854,
        "output_tokens": 491,
        "total_tokens": 37345,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36854,
        "output_tokens": 491,
        "total_tokens": 37345,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the device shown in the figure can act as a current source. The configuration suggests that it uses a transistor (likely a MOSFET, given the symbol) to control the current \\( I_x \\). \n\nIn this setup, the transistor can regulate the output current based on the input voltage or other control signals. If designed properly, it can maintain a constant current over a range of output voltages, which is characteristic of a current source. \n\nThe specific behavior would depend on the parameters of the transistor and the circuit design, including any feedback mechanisms that might be in place.",
        "format": "markdown",
        "sha256": "d93a0742170de63240242b3cff1d99be899d4a452ed80af52572f239aea2d464"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly says the diode-connected PMOS can act as a current source, missing that it presents low impedance (about 1/gm) rather than maintaining nearly constant current.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14187,
        "output_tokens": 118,
        "total_tokens": 14305,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14187,
        "output_tokens": 118,
        "total_tokens": 14305,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the device shown in the figure can act as a current source. The configuration suggests that it uses a transistor (likely a MOSFET, given the symbol) to control the current \\( I_x \\). \n\nIn this setup, the transistor can regulate the output current based on the input voltage or other control signals, effectively functioning as a current source. The behavior will depend on the specific circuit design and the parameters of the transistor used.",
        "format": "markdown",
        "sha256": "8b303b7d840c29c16aaf7d2c55d0e5d562ff19308913d6d95909d3c356d11996"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly concludes that the device can act as a current source. As drawn, M1 is a diode-connected PMOS with low small-signal impedance (about 1/gm), so it cannot provide a nearly constant current.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 14080,
        "input_tokens": 14187,
        "output_tokens": 89,
        "total_tokens": 14276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 14080,
        "input_tokens": 14187,
        "output_tokens": 89,
        "total_tokens": 14276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the device shown in the figure can act as a current source. The configuration suggests that it uses a transistor (likely a MOSFET, given the symbol) to control the current \\( I_x \\). \n\nIn this setup, the transistor can regulate the output current based on the input voltage or other control signals. If designed properly, it can maintain a constant current over a range of output voltages, which is characteristic of a current source. \n\nHowever, the specific behavior would depend on the parameters of the transistor and the circuit design.",
        "format": "markdown",
        "sha256": "cd37d8d87d1afcc3a7689a7627d7f3d73f673e366a9df9060d78f1c6a80a92c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It concludes that the diode-connected PMOS can act as a current source, contrary to the required low-impedance conclusion; it also does not identify the device or its connections.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14187,
        "output_tokens": 110,
        "total_tokens": 14297,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14187,
        "output_tokens": 110,
        "total_tokens": 14297,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit appears to be a basic common-source MOSFET amplifier configuration. Here's a breakdown of its components and operation:\n\n### Components:\n1. **MOSFET (M1)**: The main amplifying device. It controls the flow of current based on the input voltage (Vin).\n2. **Resistor (RS)**: This is the source resistor, which helps stabilize the operating point of the MOSFET and can affect the gain.\n3. **Resistor (RD)**: This is the drain resistor, which is connected to the output (Vout) and helps determine the output voltage swing.\n4. **Power Supply (VDD)**: Provides the necessary voltage for the circuit operation.\n\n### Operation:\n- **Input Voltage (Vin)**: The voltage applied to the gate of the MOSFET. It controls the channel conductivity of the MOSFET.\n- **Output Voltage (Vout)**: Taken across the drain resistor (RD). The output voltage is influenced by the input voltage and the characteristics of the MOSFET.\n  \n### Key Points:\n- **Amplification**: The circuit amplifies the input signal. The gain can be influenced by the values of RS and RD.\n- **Biasing**: Proper biasing is essential for the MOSFET to operate in the saturation region, where it can effectively amplify signals.\n- **Voltage Gain**: The voltage gain (Av) can be approximated as:\n  \\[\n  A_v \\approx -\\frac{R_D}{R_S}\n  \\]\n  This indicates that the output is inverted relative to the input.\n\n### Considerations:\n- **Frequency Response**: The circuit's performance can vary with frequency, and capacitive coupling may be needed for AC signals.\n- **Load Resistance**: The load connected to Vout can affect the overall gain and output impedance.\n\n### Conclusion:\nThis common-source amplifier configuration is widely used in analog circuits for its ability to provide voltage gain and signal inversion. Proper design and component selection are crucial for achieving the desired performance.",
        "format": "markdown",
        "sha256": "faf1add8750f057926c507d56c2c58f04bbb12f49a81113d92a34624c43796c1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Recognizes a common-source stage with source degeneration and an inverting output, but omits that M1 is PMOS and gives an unqualified gain of -RD/RS rather than -gm RD/(1 + gm RS); that expression is only a limiting approximation for strong degeneration.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36850,
        "output_tokens": 414,
        "total_tokens": 37264,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36850,
        "output_tokens": 414,
        "total_tokens": 37264,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit appears to be a basic common-source MOSFET amplifier configuration. Here's a breakdown of its components and operation:\n\n### Components:\n1. **MOSFET (M1)**: The main amplifying device. It controls the flow of current based on the input voltage (\\(V_{in}\\)).\n2. **Resistor \\(R_S\\)**: This is the source resistor, which helps stabilize the operating point of the MOSFET and can affect the gain.\n3. **Resistor \\(R_D\\)**: This is the drain resistor, which is connected to the output. It helps determine the output voltage (\\(V_{out}\\)).\n4. **Supply Voltage (\\(V_{DD}\\))**: The power supply for the circuit.\n\n### Operation:\n- **Input Signal**: The input voltage (\\(V_{in}\\)) is applied to the gate of the MOSFET. This voltage controls the MOSFET's conductivity.\n- **Amplification**: When \\(V_{in}\\) increases, the MOSFET turns on more, allowing more current to flow from \\(V_{DD}\\) through \\(R_D\\) to ground. This results in a decrease in \\(V_{out}\\) (inverted output).\n- **Output Voltage**: The output voltage (\\(V_{out}\\)) is taken across the drain resistor \\(R_D\\). The relationship between \\(V_{in}\\) and \\(V_{out}\\) is typically characterized by the gain of the amplifier, which can be influenced by the values of \\(R_S\\) and \\(R_D\\).\n\n### Key Points:\n- **Inversion**: The output is inverted relative to the input due to the nature of the common-source configuration.\n- **Gain**: The voltage gain can be approximated as \\( -\\frac{R_D}{R_S} \\) in the small-signal model.\n- **Biasing**: Proper biasing is essential to ensure the MOSFET operates in the saturation region for linear amplification.\n\n### Applications:\nThis type of amplifier is commonly used in audio applications, signal processing, and as a building block in more complex circuits. \n\n### Conclusion:\nThe circuit is a fundamental example of a MOSFET amplifier, showcasing how input voltage can control output voltage through the properties of the MOSFET and the surrounding resistive components.",
        "format": "markdown",
        "sha256": "6640d7be6cfc7643f95997f9b5d346f835a8940ec75214c463822a8abbb66b8c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "{\"score_0_to_4\":2,\"rationale\":\"It recognizes a common-source stage and claims an inverting output, but does not identify M1 as PMOS and gives the incorrect gain \\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36850,
        "output_tokens": 481,
        "total_tokens": 37331,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36850,
        "output_tokens": 481,
        "total_tokens": 37331,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit appears to be a basic common-source MOSFET amplifier configuration. Here's a breakdown of its components and operation:\n\n### Components:\n1. **MOSFET (M1)**: The main amplifying device. It operates in the saturation region for amplification.\n2. **Resistor \\( R_S \\)**: Source resistor, which helps stabilize the operating point and provides negative feedback.\n3. **Resistor \\( R_D \\)**: Drain resistor, which is used to convert the current flowing through the MOSFET into a voltage output.\n4. **Power Supply \\( V_{DD} \\)**: Provides the necessary voltage for the circuit.\n5. **Input Voltage \\( V_{in} \\)**: The signal that you want to amplify.\n6. **Output Voltage \\( V_{out} \\)**: The amplified output signal.\n\n### Operation:\n1. **Biasing**: The MOSFET needs to be properly biased to operate in the saturation region. This is typically done by choosing appropriate values for \\( R_S \\) and \\( R_D \\).\n2. **Input Signal**: The input voltage \\( V_{in} \\) is applied to the gate of the MOSFET. Changes in \\( V_{in} \\) will affect the gate-source voltage \\( V_{GS} \\), which controls the current flowing through the MOSFET.\n3. **Amplification**: As \\( V_{in} \\) increases, \\( V_{GS} \\) increases, leading to an increase in the drain current \\( I_D \\). This causes a larger voltage drop across \\( R_D \\), resulting in a decrease in \\( V_{out} \\) (since \\( V_{out} = V_{DD} - I_D \\cdot R_D \\)).\n4. **Output Characteristics**: The output voltage \\( V_{out} \\) will be an inverted version of the input signal due to the nature of the common-source configuration.\n\n### Key Points:\n- **Gain**: The voltage gain of the amplifier can be approximated as \\( -g_m R_D \\), where \\( g_m \\) is the transconductance of the MOSFET.\n- **Stability**: The presence of \\( R_S \\) provides thermal stability and improves linearity by introducing negative feedback.\n- **Frequency Response**: The frequency response of the amplifier will depend on the capacitances associated with the MOSFET and any external capacitors that may be present.\n\n### Conclusion:\nThis circuit is a fundamental building block in analog electronics, commonly used for signal amplification in various applications. Proper design and biasing are crucial for achieving the desired performance.",
        "format": "markdown",
        "sha256": "c1c69fc3777db1cda3a7c958948ebf3cbd5b066904a0e4821a9ecd97699f4134"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recognizes a common-source stage, inversion, and negative feedback from RS. But it omits the PMOS identification, gives the wrong output-voltage relation and NMOS-like current reasoning, and misses the source-degeneration factor in the gain.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36850,
        "output_tokens": 539,
        "total_tokens": 37389,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36850,
        "output_tokens": 539,
        "total_tokens": 37389,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit appears to be a basic MOSFET amplifier configuration. Let's analyze its components and operation:\n\n### Components:\n1. **MOSFET (M1)**: This is the main active device in the circuit. It controls the flow of current based on the input voltage \\( V_{in} \\).\n2. **Supply Voltage (\\( V_{DD} \\))**: This provides the necessary power for the circuit.\n3. **Input Voltage (\\( V_{in} \\))**: This is the voltage applied to the gate of the MOSFET, which determines its conduction state.\n4. **Output Voltage (\\( V_{out} \\))**: This is taken from the drain of the MOSFET and represents the amplified signal.\n5. **Source Resistor (\\( R_S \\))**: This resistor is connected to the source of the MOSFET and can help stabilize the operating point and provide feedback.\n\n### Operation:\n- **MOSFET Operation**: The MOSFET operates in different regions (cut-off, saturation, and triode) depending on the value of \\( V_{in} \\):\n  - **Cut-off Region**: If \\( V_{in} \\) is below the threshold voltage (\\( V_{th} \\)), the MOSFET is off, and \\( V_{out} \\) is approximately \\( V_{DD} \\).\n  - **Saturation Region**: When \\( V_{in} \\) exceeds \\( V_{th} \\), the MOSFET turns on, allowing current to flow from \\( V_{DD} \\) to ground through \\( R_S \\). In this region, \\( V_{out} \\) is determined by the MOSFET's characteristics and the value of \\( R_S \\).\n  - **Triode Region**: If \\( V_{in} \\) is high enough, the MOSFET may enter the triode region, where it behaves more like a resistor, and \\( V_{out} \\) will drop significantly.\n\n### Key Points:\n- **Gain**: The gain of the amplifier can be influenced by the value of \\( R_S \\) and the transconductance of the MOSFET.\n- **Biasing**: Proper biasing is essential to ensure that the MOSFET operates in the desired region for amplification.\n- **Load Effects**: The output voltage \\( V_{out} \\) can be affected by the load connected to it, which may change the effective resistance seen by the MOSFET.\n\n### Conclusion:\nThis circuit can be used as a basic amplifier, with the output voltage varying based on the input voltage and the characteristics of the MOSFET. Adjustments to \\( R_S \\) and \\( V_{in} \\) will affect the performance and gain of the amplifier.",
        "format": "markdown",
        "sha256": "30e709d17ca5fee3f2337b0be187c490e4b1662d6a772955ef1b7768c0e8b35d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It misidentifies the output as being at the drain rather than the source, so it misses the source-follower topology and its positive, less-than-unity gain. It mentions relevant MOSFET and source-resistor behavior, warranting limited partial credit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 575,
        "total_tokens": 26091,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 575,
        "total_tokens": 26091,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a basic MOSFET amplifier configuration. Here's a breakdown of its components and operation:\n\n### Components:\n1. **MOSFET (M1)**: This is the main active device in the circuit. It controls the flow of current based on the input voltage \\( V_{in} \\).\n2. **Supply Voltage (\\( V_{DD} \\))**: This is the voltage source that powers the circuit.\n3. **Output Voltage (\\( V_{out} \\))**: This is the voltage taken across the load, which is influenced by the MOSFET's operation.\n4. **Source Resistor (\\( R_S \\))**: This resistor is connected to the source terminal of the MOSFET and helps in setting the bias point and stabilizing the operation.\n\n### Operation:\n- **Input Voltage (\\( V_{in} \\))**: This voltage is applied to the gate of the MOSFET. The MOSFET operates in the saturation or triode region depending on \\( V_{in} \\) and \\( V_{DD} \\).\n- **MOSFET Behavior**: \n  - When \\( V_{in} \\) exceeds the threshold voltage of the MOSFET, it turns on, allowing current to flow from \\( V_{DD} \\) through the MOSFET to ground.\n  - The output voltage \\( V_{out} \\) is taken from the drain of the MOSFET and is influenced by the current flowing through \\( R_S \\).\n  \n### Analysis:\n1. **DC Analysis**: \n   - Determine the biasing conditions by calculating the gate-source voltage \\( V_{GS} \\) and ensuring it is above the threshold voltage for the MOSFET to operate.\n   - Calculate the drain current \\( I_D \\) using the MOSFET's transfer characteristics.\n\n2. **AC Analysis**:\n   - For small signal analysis, you can linearize the MOSFET around its operating point.\n   - The gain of the amplifier can be approximated using the transconductance \\( g_m \\) of the MOSFET and the load resistance.\n\n3. **Output Characteristics**:\n   - The output voltage \\( V_{out} \\) will vary based on the input signal \\( V_{in} \\) and the characteristics of the MOSFET.\n   - The presence of \\( R_S \\) introduces negative feedback, which can stabilize the gain and improve linearity.\n\n### Conclusion:\nThis circuit can be used as a basic amplifier. The performance will depend on the choice of the MOSFET, the values of \\( R_S \\), and the input signal characteristics. Proper biasing is crucial for optimal operation.",
        "format": "markdown",
        "sha256": "2bd3fd997807a58b59e5873d28d4e9b9fefa3c7f2e136d9949ff10a8c51a5935"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the gate input and source resistor, but misidentifies the output as being at the drain rather than the source, so it misses the source-follower topology and its gain.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 551,
        "total_tokens": 26067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 551,
        "total_tokens": 26067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a basic MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) configuration, likely used as a common-source amplifier. Here's a breakdown of its components and operation:\n\n### Components:\n1. **MOSFET (M1)**: This is the main active device in the circuit. It controls the flow of current from the drain to the source based on the voltage applied at the gate (Vin).\n2. **VDD**: This is the supply voltage connected to the drain of the MOSFET. It provides the necessary power for the circuit.\n3. **Vin**: This is the input voltage applied to the gate of the MOSFET. It determines the MOSFET's conduction state.\n4. **Vout**: This is the output voltage taken from the drain of the MOSFET. It reflects the amplified version of the input signal.\n5. **RS**: This is a resistor connected to the source of the MOSFET. It can be used for biasing and to set the operating point of the MOSFET.\n\n### Operation:\n- **Input Signal (Vin)**: When a voltage is applied to the gate (Vin), it creates an electric field that allows current to flow from the drain to the source, effectively turning the MOSFET on.\n- **Output Signal (Vout)**: The output voltage is taken from the drain. As the input voltage changes, the MOSFET's channel conductivity changes, leading to variations in the output voltage.\n- **Biasing with RS**: The resistor RS helps to stabilize the operating point of the MOSFET. It can also introduce negative feedback, which can improve linearity and reduce distortion.\n\n### Analysis:\n1. **DC Analysis**: Determine the DC operating point (Q-point) by analyzing the circuit with DC voltages. This involves calculating the gate-source voltage (Vgs) and ensuring the MOSFET is in the appropriate region (cut-off, saturation, or triode).\n2. **AC Analysis**: For small-signal analysis, you can linearize the MOSFET model around the Q-point to find the gain, input, and output impedances.\n3. **Gain Calculation**: The voltage gain can be approximated as \\( A_v \\approx -g_m \\cdot R_D \\), where \\( g_m \\) is the transconductance of the MOSFET and \\( R_D \\) is the load resistance seen by the drain.\n\n### Conclusion:\nThis circuit is a fundamental building block in analog electronics, often used in amplifiers. Understanding its operation and characteristics is crucial for designing more complex circuits.",
        "format": "markdown",
        "sha256": "9a9e119f9c90b270d6ec8691bac0ebcc375e4285d3e6ef1bf190025c3e83260c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the source follower as a common-source amplifier, places the output at the drain, and gives the wrong gain expression. It misses the circuit’s essential topology and behavior.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 541,
        "total_tokens": 26057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 541,
        "total_tokens": 26057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a basic common-source MOSFET amplifier configuration. Here's a breakdown of its components and operation:\n\n### Components:\n1. **M1 (MOSFET)**: This is the main amplifying device. It operates in the saturation region for amplification.\n2. **RD (Drain Resistor)**: This resistor is connected to the drain of the MOSFET and helps set the output voltage.\n3. **VDD**: This is the supply voltage for the circuit.\n4. **Vin**: This is the input voltage signal that you want to amplify.\n5. **Vout**: This is the output voltage taken across the drain resistor.\n\n### Operation:\n- **Input Signal (Vin)**: The input voltage is applied to the gate of the MOSFET (M1). The MOSFET's gate-source voltage (Vgs) controls its operation.\n- **Amplification**: When Vin increases, Vgs increases, causing the MOSFET to conduct more. This results in a larger current flowing through RD, which causes a drop in Vout (since Vout is measured at the drain).\n- **Output Voltage (Vout)**: The output voltage is inversely related to the input voltage due to the nature of the common-source configuration. An increase in Vin leads to a decrease in Vout, resulting in a phase inversion.\n- **Biasing**: Proper biasing of the MOSFET is crucial to ensure it operates in the saturation region for linear amplification. This typically involves selecting appropriate values for RD and ensuring VDD is sufficiently high.\n\n### Key Characteristics:\n- **Voltage Gain**: The voltage gain of the amplifier can be approximated as \\( A_v \\approx -g_m \\cdot R_D \\), where \\( g_m \\) is the transconductance of the MOSFET.\n- **Input and Output Impedance**: The input impedance is high due to the gate of the MOSFET, while the output impedance is determined by RD and the MOSFET's characteristics.\n\n### Applications:\nThis type of amplifier is commonly used in analog circuits for signal amplification, such as in audio applications, sensor signal conditioning, and RF amplifiers.\n\n### Summary:\nThe circuit is a common-source MOSFET amplifier that provides voltage amplification with phase inversion. Proper design and biasing are essential for optimal performance.",
        "format": "markdown",
        "sha256": "09a93bbbcef2c2fc0874b1134d5fd34ce9710191eb933a5cafd897ee64f57f41"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the source-driven, gate-grounded common-gate stage as common-source, so its input terminal, gain sign, and input-impedance conclusions are all wrong.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 478,
        "total_tokens": 25994,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 478,
        "total_tokens": 25994,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a basic common-source MOSFET amplifier configuration. Here's a breakdown of its components and operation:\n\n### Components:\n1. **M1 (MOSFET)**: This is the main amplifying device. It operates in the saturation region for amplification.\n2. **RD (Drain Resistor)**: This resistor is connected to the drain of the MOSFET and helps set the output voltage.\n3. **VDD**: This is the supply voltage for the circuit.\n4. **Vin**: This is the input voltage signal that you want to amplify.\n5. **Vout**: This is the output voltage taken across the drain resistor.\n\n### Operation:\n- **Input Signal (Vin)**: The input voltage is applied to the gate of the MOSFET (M1). The MOSFET will turn on when the gate-source voltage (Vgs) exceeds the threshold voltage (Vth).\n  \n- **Amplification**: When the MOSFET is on, it allows current to flow from the drain to the source. The output voltage (Vout) is taken from the drain of the MOSFET. The output voltage will be inversely related to the input voltage due to the nature of the common-source configuration. As Vin increases, Vout decreases and vice versa.\n\n- **Output Voltage (Vout)**: The output voltage can be expressed as:\n  \\[\n  V_{out} = V_{DD} - I_D \\cdot R_D\n  \\]\n  where \\(I_D\\) is the drain current, which is a function of the input voltage and the characteristics of the MOSFET.\n\n### Key Points:\n- **Inversion**: The output is inverted relative to the input.\n- **Gain**: The voltage gain of the amplifier can be approximated as:\n  \\[\n  A_v \\approx -g_m \\cdot R_D\n  \\]\n  where \\(g_m\\) is the transconductance of the MOSFET.\n  \n- **Biasing**: Proper biasing is essential to ensure that the MOSFET operates in the saturation region for the desired range of input signals.\n\n### Applications:\nThis type of amplifier is commonly used in analog circuits for signal amplification, such as in audio amplifiers, RF amplifiers, and other signal processing applications. \n\n### Conclusion:\nThe circuit is a fundamental example of a MOSFET amplifier, showcasing the principles of amplification, inversion, and the importance of biasing in electronic circuits.",
        "format": "markdown",
        "sha256": "e78d01a3f34d1a00a18d65a246639e6380c712f58cd051a4c5d30b218b60c962"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the source-driven, gate-AC-grounded common-gate stage as a common-source stage, so it gives the wrong input terminal and predicts an inverted gain instead of the non-inverting common-gate gain.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 511,
        "total_tokens": 26027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 511,
        "total_tokens": 26027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a basic common-source MOSFET amplifier configuration. Here's a breakdown of its components and operation:\n\n### Components:\n1. **M1 (MOSFET)**: This is the main amplifying device. It operates in the saturation region for amplification.\n2. **RD (Drain Resistor)**: This resistor is connected to the drain of the MOSFET and helps set the output voltage.\n3. **VDD**: This is the supply voltage for the circuit.\n4. **Vin**: This is the input voltage signal that you want to amplify.\n5. **Vout**: This is the output voltage taken across the drain resistor.\n\n### Operation:\n- **Input Signal (Vin)**: The input voltage is applied to the gate of the MOSFET (M1). The MOSFET will turn on when the gate-source voltage (Vgs) exceeds the threshold voltage (Vth).\n  \n- **Amplification**: When the MOSFET is on, it allows current to flow from the drain to the source. The output voltage (Vout) is taken from the drain of the MOSFET. The output voltage will be inversely related to the input voltage due to the nature of the common-source configuration. As Vin increases, Vout decreases and vice versa.\n\n- **Output Voltage (Vout)**: The output voltage can be calculated using the formula:\n  \\[\n  V_{out} = V_{DD} - I_D \\cdot R_D\n  \\]\n  where \\(I_D\\) is the drain current, which can be expressed in terms of the transconductance and the gate-source voltage.\n\n### Key Characteristics:\n- **Inversion**: The output is inverted relative to the input.\n- **Gain**: The voltage gain of the amplifier can be approximated as:\n  \\[\n  A_v \\approx -g_m \\cdot R_D\n  \\]\n  where \\(g_m\\) is the transconductance of the MOSFET.\n\n### Biasing:\n- Proper biasing is essential to ensure that the MOSFET operates in the saturation region for the desired range of input signals. This typically involves setting a DC operating point (Q-point) using appropriate resistor values.\n\n### Applications:\nThis type of amplifier is commonly used in analog circuits for signal amplification, such as in audio amplifiers, RF amplifiers, and other signal processing applications.\n\n### Conclusion:\nThe circuit is a fundamental building block in analog electronics, demonstrating the principles of MOSFET operation and amplification. Proper design and biasing are crucial for optimal performance.",
        "format": "markdown",
        "sha256": "6d4fe410ef2274cbb63ae9c7afc4774f90c91055098110b5513830e60569c5c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as common-source and treats Vin as a gate input. In fact, Vin is applied at the source and the gate is AC-grounded, so the stage is common-gate with a non-inverting gain; the answer gives the wrong topology, sign, and gain.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 529,
        "total_tokens": 26045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 529,
        "total_tokens": 26045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their functions:\n\n1. **Components**:\n   - **M1**: This is likely a MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor). Its gate is connected to the capacitor \\( C_1 \\) and the input voltage \\( V_{in} \\).\n   - **C1**: This capacitor is used for coupling or decoupling signals. It allows AC signals to pass while blocking DC.\n   - **RD**: This resistor is connected to the drain of the MOSFET and is used to set the output voltage \\( V_{out} \\).\n   - **VDD**: This is the supply voltage for the circuit.\n   - **Vb**: This is the voltage at the gate of the MOSFET, which is influenced by the capacitor \\( C_1 \\) and the input voltage \\( V_{in} \\).\n\n2. **Operation**:\n   - When an AC signal is applied to \\( V_{in} \\), the capacitor \\( C_1 \\) allows the AC component to pass while blocking any DC offset.\n   - The voltage at the gate \\( V_b \\) will vary according to the input signal, which will control the MOSFET \\( M1 \\).\n   - Depending on the gate voltage \\( V_b \\), the MOSFET will either turn on or off, allowing current to flow through \\( RD \\) and affecting \\( V_{out} \\).\n   - If \\( M1 \\) is in the saturation region, \\( V_{out} \\) can be approximated as \\( V_{DD} - I_D \\cdot R_D \\), where \\( I_D \\) is the drain current.\n\n3. **Key Points**:\n   - The circuit can function as an amplifier if the MOSFET operates in the appropriate region (typically saturation for amplification).\n   - The gain of the amplifier can be influenced by the values of \\( RD \\) and the transconductance of the MOSFET.\n   - The coupling capacitor \\( C_1 \\) will affect the frequency response of the circuit, allowing certain frequencies to pass while attenuating others.\n\n4. **Analysis**:\n   - To analyze the circuit quantitatively, you would typically apply small-signal analysis if the input signal is small.\n   - You can derive the transfer function by analyzing the small-signal model of the MOSFET and the resistive network formed by \\( RD \\).\n\nThis circuit is commonly used in analog applications, such as amplifiers or signal processing circuits. Further analysis would require specific values for the components and the input signal characteristics.",
        "format": "markdown",
        "sha256": "adfc4ac2d3a9ada48fcc7645432516498d7a04aa935b08d3ecc680490b5742b3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the input as connected to the gate and misses that the source node is directly shorted to ground, so it fails to recognize the ideal zero-gain result.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 549,
        "total_tokens": 26065,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 549,
        "total_tokens": 26065,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their functions:\n\n1. **Components**:\n   - **M1**: This is likely a MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor). Its gate is connected to the capacitor \\( C_1 \\) and the input voltage \\( V_{in} \\).\n   - **\\( C_1 \\)**: This capacitor is used for coupling or decoupling signals. It allows AC signals to pass while blocking DC.\n   - **\\( R_D \\)**: This resistor is connected to the drain of the MOSFET and is used for load purposes.\n   - **\\( V_{DD} \\)**: This is the supply voltage for the circuit.\n   - **\\( V_{out} \\)**: This is the output voltage taken from the drain of the MOSFET.\n   - **\\( V_b \\)**: This voltage is likely the bias voltage for the MOSFET.\n\n2. **Operation**:\n   - The input voltage \\( V_{in} \\) is applied to the gate of the MOSFET through the capacitor \\( C_1 \\). This means that any AC signal present in \\( V_{in} \\) will influence the gate voltage of the MOSFET.\n   - The MOSFET \\( M1 \\) will turn on when the gate voltage exceeds a certain threshold, allowing current to flow from \\( V_{DD} \\) through \\( R_D \\) to ground, thus affecting \\( V_{out} \\).\n   - The output voltage \\( V_{out} \\) will depend on the state of the MOSFET (on or off) and the value of \\( R_D \\).\n\n3. **AC and DC Analysis**:\n   - For AC analysis, the capacitor \\( C_1 \\) will short DC signals, allowing only AC signals to affect the gate of the MOSFET.\n   - For DC analysis, the capacitor can be considered an open circuit, and the biasing conditions for the MOSFET can be determined based on \\( V_{in} \\) and \\( V_b \\).\n\n4. **Key Points**:\n   - The circuit can function as an amplifier if the MOSFET operates in the saturation region.\n   - The gain of the circuit will depend on the transconductance of the MOSFET and the load resistor \\( R_D \\).\n   - The cutoff frequency of the circuit will be influenced by the value of \\( C_1 \\) and the resistance seen at the gate.\n\n5. **Conclusion**:\n   - This circuit is likely a basic MOSFET amplifier configuration, where the input signal is coupled through a capacitor, and the output is taken from the drain of the MOSFET. The behavior of the circuit will depend on the values of \\( R_D \\), \\( C_1 \\), and the characteristics of the MOSFET \\( M1 \\). \n\nFor a more detailed analysis, specific values for the components and the characteristics of the MOSFET would be needed.",
        "format": "markdown",
        "sha256": "d5ae5c39801a025f92b21ce4d91c9b38f7bb041e46cc449ec8c7f237a413d72f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the input as connected to the gate and misses that the source node is shorted to ground, so it does not identify the circuit’s essentially zero input-to-output gain.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 628,
        "total_tokens": 26144,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 628,
        "total_tokens": 26144,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their functions:\n\n1. **Components**:\n   - **M1**: This is likely a MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor). Its operation depends on the gate voltage \\( V_b \\).\n   - **C1**: This capacitor is used for coupling or decoupling signals. It can block DC while allowing AC signals to pass.\n   - **RD**: This resistor is connected to the drain of the MOSFET and is used to set the output voltage \\( V_{out} \\).\n   - **\\( V_{in} \\)**: This is the input voltage applied to the circuit.\n   - **\\( V_{DD} \\)**: This is the supply voltage for the circuit.\n\n2. **Operation**:\n   - The input voltage \\( V_{in} \\) is applied to the gate of the MOSFET through the capacitor \\( C1 \\). This means that any DC component of \\( V_{in} \\) will be blocked, allowing only AC signals to control the gate voltage \\( V_b \\).\n   - The MOSFET \\( M1 \\) will turn on when \\( V_b \\) exceeds the threshold voltage \\( V_{th} \\). When it is on, it allows current to flow from \\( V_{DD} \\) through \\( R_D \\) to ground, affecting the output voltage \\( V_{out} \\).\n   - The output voltage \\( V_{out} \\) can be determined by the voltage drop across \\( R_D \\) when the MOSFET is conducting.\n\n3. **Analysis**:\n   - **DC Analysis**: For DC analysis, consider \\( V_{in} \\) as a constant voltage. If \\( V_{in} \\) is above the threshold voltage, the MOSFET will be in saturation or triode region depending on the values of \\( V_{DD} \\) and \\( R_D \\).\n   - **AC Analysis**: For AC signals, the capacitor \\( C1 \\) allows the AC component of \\( V_{in} \\) to modulate \\( V_b \\), which in turn controls the MOSFET. The output voltage \\( V_{out} \\) will vary based on the AC signal applied at \\( V_{in} \\).\n\n4. **Output Voltage**:\n   - The output voltage \\( V_{out} \\) can be expressed as:\n     \\[\n     V_{out} = V_{DD} - I_D \\cdot R_D\n     \\]\n   where \\( I_D \\) is the drain current through the MOSFET, which is a function of \\( V_b \\) and the characteristics of the MOSFET.\n\n5. **Conclusion**:\n   - This circuit can function as an amplifier or a switch depending on the input signal and the configuration of the MOSFET. The coupling capacitor \\( C1 \\) plays a crucial role in allowing AC signals to control the MOSFET while blocking DC components. \n\nFor a more detailed analysis, specific values for \\( V_{in} \\), \\( V_{DD} \\), \\( R_D \\), and the characteristics of the MOSFET would be needed.",
        "format": "markdown",
        "sha256": "fb36514e73e71462aecc75b633f15e6cd8dee0245b6856c3d3fe330cbba5af11"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misreads the input as applied to the gate and misses that the source node is shorted to ground, so it does not identify the circuit’s zero-gain behavior.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 670,
        "total_tokens": 26186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 670,
        "total_tokens": 26186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to analyze the components and their configurations.\n\n1. **Identify Capacitors**: The circuit contains several capacitors: \\(C_{GS}\\), \\(C_{GD}\\), \\(C_{DB}\\), and \\(C_{SB}\\). Each capacitor can introduce a pole in the frequency response.\n\n2. **Transistor Behavior**: The transistor \\(M_1\\) (likely a MOSFET) will also contribute to the dynamics of the circuit, particularly through its gate-source and gate-drain capacitances.\n\n3. **Input and Output**: The input voltage \\(V_{in}\\) and output voltage \\(V_{out}\\) will also affect the number of poles based on how the capacitors interact with resistive elements in the circuit.\n\n### General Analysis:\n- Each capacitor connected to a resistive element typically introduces one pole.\n- The total number of poles can be estimated by counting the capacitors and considering their interactions with resistances.\n\n### Conclusion:\nIn this circuit, you can expect at least one pole from each capacitor, leading to a total of **four poles** from the capacitors alone. However, the actual number of poles may vary based on the specific configuration and interactions of the components. \n\nThus, the circuit likely has **four poles**.",
        "format": "markdown",
        "sha256": "302d0128ae66a1ce81267d194cac5b9edecfee8d983e5710eaf95fe24ab4c507"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit has two poles, not four: CSB is shorted out, and the other capacitors have only two independent voltages. Counting one pole per capacitor is incorrect.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25520,
        "output_tokens": 270,
        "total_tokens": 25790,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25520,
        "output_tokens": 270,
        "total_tokens": 25790,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to analyze the components and their configurations.\n\n1. **Identify the Components**: The circuit includes a MOSFET (M1), resistors (RS, RD), and capacitors (CGS, CGD, CDB, CSB).\n\n2. **Poles in the Circuit**: Each capacitor introduces a pole in the frequency response of the circuit. The number of poles can be estimated based on the capacitors connected to the output and their interactions with resistive elements.\n\n3. **Capacitors**:\n   - **CGS**: This capacitor is connected to the gate-source and will contribute to the pole.\n   - **CGD**: This capacitor is connected to the gate-drain and can also contribute to a pole.\n   - **CDB**: This capacitor is connected to the drain and will contribute to the pole.\n   - **CSB**: This capacitor is connected to the source and will contribute to the pole.\n\n4. **Total Poles**: Each capacitor typically introduces one pole. Therefore, with four capacitors (CGS, CGD, CDB, CSB), the circuit will have four poles.\n\nIn conclusion, the circuit shown has **four poles**.",
        "format": "markdown",
        "sha256": "7061e4f87934cecf4dbe2cedaed91a2402bda21154a4e4a23591f54b7f59efe6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives the wrong count: the circuit has two poles, not four. It identifies the capacitors but incorrectly assumes each creates an independent pole, missing that CSB is shorted out and the remaining capacitor voltages are not all independent.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25520,
        "output_tokens": 259,
        "total_tokens": 25779,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25520,
        "output_tokens": 259,
        "total_tokens": 25779,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to analyze the components and their configurations.\n\n1. **Identify the Components**: The circuit includes a MOSFET (M1), resistors (RS, RD), and capacitors (CGS, CGD, CDB, CSB).\n\n2. **Determine the Configuration**: The circuit appears to be a common-source amplifier configuration, which typically has a certain number of poles based on the reactive components.\n\n3. **Count the Poles**:\n   - Each capacitor introduces a pole in the frequency response.\n   - In this circuit, we have four capacitors (CGS, CGD, CDB, CSB).\n\n4. **Consider the Effects of Resistors**: The resistors will interact with the capacitors to form the poles. The output impedance and the input impedance will also affect the number of poles.\n\nIn general, for a common-source amplifier with these capacitors, you can expect at least one pole for each capacitor, leading to a total of four poles. However, the actual number of distinct poles may vary based on the specific circuit configuration and interactions.\n\n### Conclusion:\nThe circuit shown likely has **four poles** due to the four capacitors present.",
        "format": "markdown",
        "sha256": "ec27fdcdb10c8bb7c177d076c7c09340cc806295db7c35644c49bf03066d2bf3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes there are four poles by counting capacitors individually. In fact, CSB is shorted out and the other capacitor voltages are not all independent, so the circuit has two poles. Identifying the common-source stage is relevant but does not support the pole count.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25520,
        "output_tokens": 252,
        "total_tokens": 25772,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25520,
        "output_tokens": 252,
        "total_tokens": 25772,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and understand how they interact. The circuit consists of a MOSFET (M1), resistors (RD, R1, R2), and voltage sources (VDD and Vin). Here’s a step-by-step analysis:\n\n### Components:\n1. **MOSFET (M1)**: This acts as a switch or amplifier depending on the input voltage (Vin). The gate-source voltage (VGS) determines whether the MOSFET is in the cutoff, saturation, or triode region.\n2. **Resistors (RD, R1, R2)**: These resistors are used for biasing and load purposes. RD is connected to the drain of the MOSFET, while R1 and R2 form a voltage divider at the output.\n3. **Voltage Sources (VDD, Vin)**: VDD is the supply voltage for the circuit, while Vin is the input voltage that controls the MOSFET.\n\n### Analysis Steps:\n1. **Determine the Operating Region of M1**:\n   - Calculate VGS = Vin - Vout. If VGS is greater than the threshold voltage (Vth) of the MOSFET, it will be in the saturation or triode region.\n   - If Vin < Vth, M1 is off (cutoff region).\n\n2. **Output Voltage (Vout)**:\n   - If M1 is on, Vout can be determined by the voltage divider formed by R1 and R2:\n     \\[\n     Vout = \\frac{R2}{R1 + R2} \\cdot VDD\n     \\]\n   - If M1 is off, Vout will be approximately 0V.\n\n3. **Drain Current (ID)**:\n   - In saturation, the drain current can be approximated using:\n     \\[\n     I_D = k \\cdot (V_{GS} - V_{th})^2\n     \\]\n   - In the triode region, it can be calculated using:\n     \\[\n     I_D = k \\cdot \\left[(V_{GS} - V_{th})V_{DS} - \\frac{V_{DS}^2}{2}\\right]\n     \\]\n   - Here, \\(k\\) is the transconductance parameter of the MOSFET.\n\n4. **Voltage Across Resistors**:\n   - The voltage across RD can be calculated using Ohm's law:\n     \\[\n     V_{RD} = I_D \\cdot R_D\n     \\]\n   - The voltage across R1 and R2 can also be calculated based on the current flowing through them.\n\n### Summary:\n- The behavior of the circuit is highly dependent on the input voltage (Vin) and the characteristics of the MOSFET (threshold voltage, transconductance).\n- The output voltage (Vout) will vary based on the state of the MOSFET and the values of the resistors.\n- This circuit can be used for amplification or switching applications depending on the configuration and input conditions. \n\nFor a more precise analysis, specific values for the resistors, the MOSFET parameters, and the input voltage would be needed.",
        "format": "markdown",
        "sha256": "f4b1d7062291e6c38bb58284219b26fba356c60cc38b6a1d6cce2c84dbe07be7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the signal path and misses the essential feedback: Vin drives M1's source, while the output divider feeds the gate. Its VGS and Vout equations therefore describe the wrong circuit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 661,
        "total_tokens": 26177,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 661,
        "total_tokens": 26177,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their interactions. The circuit consists of a MOSFET (M1), resistors (RD, R1, R2), and voltage sources (VDD and Vin). Here’s a step-by-step analysis:\n\n### Components:\n1. **M1 (MOSFET)**: This is the main switching element. Its operation depends on the gate-source voltage (VGS), which is determined by Vin and the voltage at the source.\n2. **RD (Drain Resistor)**: This resistor is connected to the drain of the MOSFET and is used to limit the current flowing through the MOSFET.\n3. **R1 and R2 (Output Resistors)**: These resistors form a voltage divider at the output (Vout).\n4. **VDD**: This is the supply voltage for the circuit.\n5. **Vin**: This is the input voltage that controls the MOSFET.\n\n### Analysis Steps:\n1. **MOSFET Operation**:\n   - The MOSFET will turn on when Vin exceeds the threshold voltage (Vth) of the MOSFET. When M1 is on, it allows current to flow from the drain to the source.\n   - The voltage at the source of the MOSFET will be influenced by the output voltage (Vout) and the voltage drop across R1.\n\n2. **Voltage at Vout**:\n   - The output voltage (Vout) can be expressed in terms of the voltage divider formed by R1 and R2:\n     \\[\n     V_{out} = \\frac{R2}{R1 + R2} \\cdot V_{DD}\n     \\]\n   - This assumes that the MOSFET is in saturation and that the output is taken from the junction of R1 and R2.\n\n3. **Current Flow**:\n   - The current through RD can be calculated using Ohm's law:\n     \\[\n     I_D = \\frac{V_{DD} - V_{out}}{R_D}\n     \\]\n   - This current also flows through R1 and R2, affecting Vout.\n\n4. **Feedback Mechanism**:\n   - The output voltage (Vout) influences the gate-source voltage (VGS) of the MOSFET, creating a feedback loop. If Vout increases, VGS may decrease, turning the MOSFET off, and vice versa.\n\n5. **Steady-State Conditions**:\n   - In steady-state, the circuit will reach a point where the input voltage (Vin) and the feedback from Vout stabilize the operation of the MOSFET.\n\n### Conclusion:\nThe circuit operates as a feedback amplifier where the MOSFET controls the output voltage based on the input voltage. The resistors R1 and R2 form a voltage divider that sets the output voltage, while RD limits the current through the MOSFET. The behavior of the circuit will depend on the values of the resistors, the threshold voltage of the MOSFET, and the input voltage. \n\nFor precise calculations, specific values for VDD, RD, R1, R2, and Vin would be needed.",
        "format": "markdown",
        "sha256": "c1a9a26ec285b96761a7f7c06c1dd5547426ba39a1624db43976a774facf021e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology: Vin is applied to M1’s source, while the output divider feeds the gate; it instead treats the divider as setting Vout from VDD. It also gives the feedback direction backwards. It earns minimal credit for recognizing that some feedback is present.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 656,
        "total_tokens": 26172,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 656,
        "total_tokens": 26172,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and understand how they interact. The circuit consists of a MOSFET (M1), resistors (RD, R1, R2), and voltage sources (VDD and Vin). Here’s a step-by-step analysis:\n\n### Components:\n1. **MOSFET (M1)**: This acts as a switch or amplifier depending on the input voltage (Vin). The gate-source voltage (VGS) determines whether the MOSFET is in the cutoff, saturation, or triode region.\n2. **Resistors (RD, R1, R2)**: These resistors are used for biasing and load purposes.\n3. **Voltage Sources (VDD, Vin)**: VDD is the supply voltage, while Vin is the input voltage that controls the MOSFET.\n\n### Analysis Steps:\n\n1. **Determine the Operating Region of M1**:\n   - Calculate VGS = Vin - Vout.\n   - Compare VGS with the threshold voltage (Vth) of the MOSFET to determine if M1 is ON (saturation or triode) or OFF (cutoff).\n\n2. **Output Voltage (Vout)**:\n   - If M1 is ON, Vout can be determined by the voltage drop across R1 and R2.\n   - Use Kirchhoff's Voltage Law (KVL) to find Vout:\n     \\[\n     Vout = VDD - I_D \\cdot RD\n     \\]\n   - Where \\(I_D\\) is the drain current, which can be calculated based on the MOSFET's characteristics.\n\n3. **Drain Current (ID)**:\n   - In saturation, \\(I_D\\) can be approximated as:\n     \\[\n     I_D = \\frac{1}{2} k_n (V_{GS} - V_{th})^2\n     \\]\n   - In the triode region, it can be approximated as:\n     \\[\n     I_D = k_n \\left[(V_{GS} - V_{th})V_{DS} - \\frac{V_{DS}^2}{2}\\right]\n     \\]\n   - Where \\(k_n\\) is the transconductance parameter of the MOSFET.\n\n4. **Voltage Divider**:\n   - If R1 and R2 form a voltage divider, the output voltage can also be expressed as:\n     \\[\n     Vout = \\frac{R2}{R1 + R2} \\cdot V_{DD}\n     \\]\n\n5. **Feedback and Stability**:\n   - The circuit may have feedback through R1 and R2, affecting stability and gain. Analyze the feedback loop to determine the overall gain and stability of the circuit.\n\n### Conclusion:\nThe behavior of the circuit heavily depends on the values of Vin, VDD, and the characteristics of the MOSFET (like Vth and k_n). By determining the operating region of M1 and calculating the output voltage based on the resistors and the MOSFET's characteristics, you can fully analyze the circuit's performance.",
        "format": "markdown",
        "sha256": "db3fab334fd3498cd39cbdc29131051568525ed298160bf3ea5225817e8d306d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It misses the source-input, gate-feedback topology and gives an incorrect VGS relation and divider equation. The generic MOSFET discussion and vague mention of possible feedback earn only minimal partial credit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 641,
        "total_tokens": 26157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 641,
        "total_tokens": 26157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown appears to be a basic CMOS inverter configuration, consisting of two MOSFETs (M1 and M2). Here's a breakdown of its components and operation:\n\n### Components:\n1. **M1 (PMOS Transistor)**:\n   - Connected to the supply voltage \\( V_{DD} \\).\n   - Turns on when the gate voltage \\( V_{in} \\) is low (close to 0V).\n   - Conducts current from \\( V_{DD} \\) to \\( V_{out} \\) when active.\n\n2. **M2 (NMOS Transistor)**:\n   - Connected to ground.\n   - Turns on when the gate voltage \\( V_{in} \\) is high (close to \\( V_{DD} \\)).\n   - Conducts current from \\( V_{out} \\) to ground when active.\n\n### Operation:\n- **When \\( V_{in} \\) is Low (0V)**:\n  - M1 turns on (conducts), pulling \\( V_{out} \\) up to \\( V_{DD} \\).\n  - M2 turns off (non-conducting), preventing current flow to ground.\n  - Result: \\( V_{out} = V_{DD} \\).\n\n- **When \\( V_{in} \\) is High (\\( V_{DD} \\))**:\n  - M1 turns off (non-conducting), stopping current flow from \\( V_{DD} \\).\n  - M2 turns on (conducts), pulling \\( V_{out} \\) down to ground.\n  - Result: \\( V_{out} = 0V \\).\n\n### Summary:\nThis circuit functions as an inverter, where the output \\( V_{out} \\) is the logical inverse of the input \\( V_{in} \\). When \\( V_{in} \\) is low, \\( V_{out} \\) is high, and vice versa. The circuit is efficient and commonly used in digital logic applications. \n\n### Additional Considerations:\n- **Bias Voltage \\( V_b \\)**: The role of \\( V_b \\) is not explicitly defined in the circuit. It could be used for biasing or controlling the threshold voltage of one of the transistors, depending on the specific application.\n- **Power Consumption**: The circuit consumes power only during the switching transitions, making it energy-efficient for digital applications. \n\nIf you have specific parameters or conditions you'd like to analyze further, please provide them!",
        "format": "markdown",
        "sha256": "a8f98bb0d717127112fc9f242618bfd27e0737972257c1c04b2ca5289e820ff8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the topology as a CMOS inverter and M1 as a PMOS. The circuit is an NMOS source follower with M2 biased as a current source; the answer misses its operation and gain.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 508,
        "total_tokens": 26024,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 508,
        "total_tokens": 26024,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown appears to be a basic CMOS inverter configuration, consisting of two MOSFETs (M1 and M2). Here's a breakdown of its components and operation:\n\n### Components:\n1. **M1 (PMOS Transistor)**:\n   - Connected to the supply voltage \\( V_{DD} \\).\n   - Turns on when the gate voltage \\( V_{in} \\) is low (close to 0V).\n   - Provides a path from \\( V_{DD} \\) to \\( V_{out} \\) when active.\n\n2. **M2 (NMOS Transistor)**:\n   - Connected to ground.\n   - Turns on when the gate voltage \\( V_{in} \\) is high (close to \\( V_{DD} \\)).\n   - Provides a path from \\( V_{out} \\) to ground when active.\n\n### Operation:\n- **When \\( V_{in} = 0 \\) (Low)**:\n  - M1 turns on (conducts), and M2 turns off (non-conducting).\n  - \\( V_{out} \\) is pulled up to \\( V_{DD} \\) (logic high).\n\n- **When \\( V_{in} = V_{DD} \\) (High)**:\n  - M1 turns off (non-conducting), and M2 turns on (conducts).\n  - \\( V_{out} \\) is pulled down to ground (logic low).\n\n### Bias Voltage \\( V_b \\):\n- The bias voltage \\( V_b \\) is typically used to set the threshold voltage for M2, ensuring it turns on at the desired \\( V_{in} \\) level. This can help in improving the switching characteristics and stability of the inverter.\n\n### Summary:\nThis circuit functions as an inverter, where the output \\( V_{out} \\) is the logical inverse of the input \\( V_{in} \\). It is commonly used in digital circuits for signal processing and logic operations. The complementary nature of the PMOS and NMOS transistors allows for efficient switching with minimal power consumption during static states.",
        "format": "markdown",
        "sha256": "903df5f1f49020303de7a0581a95627bba48a2d133cc7ee4d5a8776ab5237c5c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the circuit as a CMOS inverter, assigning the wrong device types and connections. It misses the NMOS source follower and the biased NMOS current-source load, so it gives no valid gain analysis.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 429,
        "total_tokens": 25945,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 429,
        "total_tokens": 25945,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown appears to be a basic CMOS inverter configuration, consisting of two MOSFETs: M1 (likely an NMOS) and M2 (likely a PMOS). Here's a breakdown of its operation:\n\n### Components:\n1. **M1 (NMOS)**: This transistor conducts when the gate voltage (Vin) is high (close to VDD), allowing current to flow from the drain to the source.\n2. **M2 (PMOS)**: This transistor conducts when the gate voltage (Vb) is low (close to ground), allowing current to flow from the source to the drain.\n\n### Operation:\n- **Input High (Vin = VDD)**:\n  - M1 turns on, pulling Vout down to ground (0V).\n  - M2 turns off, preventing any current from flowing from VDD to Vout.\n  - **Output (Vout)**: Low (0V).\n\n- **Input Low (Vin = 0V)**:\n  - M1 turns off, preventing current flow.\n  - M2 turns on, pulling Vout up to VDD.\n  - **Output (Vout)**: High (VDD).\n\n### Biasing:\n- **Vb**: This voltage is typically set to a value that ensures M2 operates correctly. It may be connected to VDD or a specific bias voltage to ensure proper switching.\n\n### Summary:\nThis circuit functions as an inverter, where the output is the logical inverse of the input. It is efficient due to the complementary nature of the NMOS and PMOS transistors, allowing for low power consumption during static states. The circuit is commonly used in digital logic applications.",
        "format": "markdown",
        "sha256": "1b90ab158b267d9719f57904ffd641b9ca1b8c3b11eddb233981f78b52c79aa0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a CMOS inverter. M1 is an NMOS source follower and M2 is an NMOS current-source load; the gain is positive and near unity, not an inverting logic response.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 341,
        "total_tokens": 25857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 341,
        "total_tokens": 25857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a basic CMOS inverter configuration, which consists of two MOSFETs: M1 (an NMOS transistor) and M2 (a PMOS transistor). Here's a breakdown of its operation:\n\n### Components:\n1. **M1 (NMOS)**: This transistor connects the output to ground when it is turned on.\n2. **M2 (PMOS)**: This transistor connects the output to the supply voltage \\( V_{DD} \\) when it is turned on.\n\n### Operation:\n- **Input Low (\\( V_{in} = 0 \\))**:\n  - M1 is off (no current flows through it).\n  - M2 is on (it connects \\( V_{out} \\) to \\( V_{DD} \\)).\n  - Therefore, \\( V_{out} = V_{DD} \\).\n\n- **Input High (\\( V_{in} = V_{DD} \\))**:\n  - M1 is on (it connects \\( V_{out} \\) to ground).\n  - M2 is off (no current flows through it).\n  - Therefore, \\( V_{out} = 0 \\).\n\n### Characteristics:\n- **Inversion**: The circuit inverts the input signal. When \\( V_{in} \\) is high, \\( V_{out} \\) is low, and vice versa.\n- **Power Consumption**: In static conditions (when the input is stable), the circuit consumes very little power since only one of the transistors is conducting at any time.\n- **Switching Speed**: The speed of the inverter is determined by the capacitance at the output and the drive strength of the transistors.\n\n### Applications:\nThis CMOS inverter is widely used in digital circuits for logic operations, forming the basis of more complex logic gates and circuits.\n\n### Summary:\nThe circuit effectively functions as an inverter, providing a simple yet efficient way to control output based on the input voltage level.",
        "format": "markdown",
        "sha256": "9ed5cefbb6b837b98a29b8d6077ac5dcb75fc416243d7432ccb8ea4492939abc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and accurately describes its inverting operation at both logic levels.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14182,
        "output_tokens": 400,
        "total_tokens": 14582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14182,
        "output_tokens": 400,
        "total_tokens": 14582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a basic CMOS inverter configuration, which consists of two MOSFETs: M1 (an NMOS transistor) and M2 (a PMOS transistor). Here's a breakdown of its operation:\n\n### Components:\n1. **M1 (NMOS)**: Connected to ground. It conducts when the gate voltage (Vin) is high.\n2. **M2 (PMOS)**: Connected to the supply voltage (VDD). It conducts when the gate voltage (Vin) is low.\n\n### Operation:\n- **When Vin is High (Logic 1)**:\n  - M1 turns ON (conducts), pulling Vout to ground (0V).\n  - M2 turns OFF (does not conduct), preventing Vout from being pulled up to VDD.\n  - **Output (Vout)**: Low (0V).\n\n- **When Vin is Low (Logic 0)**:\n  - M1 turns OFF (does not conduct), preventing Vout from being pulled to ground.\n  - M2 turns ON (conducts), pulling Vout up to VDD.\n  - **Output (Vout)**: High (VDD).\n\n### Characteristics:\n- **Inversion**: The output is the logical inverse of the input.\n- **Low Power Consumption**: In static conditions (when the input is stable), the circuit consumes very little power since only one transistor conducts at a time.\n- **High Noise Margin**: CMOS inverters have good noise margins, making them robust against variations in input voltage.\n\n### Summary:\nThis circuit is a fundamental building block in digital electronics, widely used in logic gates and integrated circuits due to its efficiency and reliability.",
        "format": "markdown",
        "sha256": "ca42b47816bd732023ca21f16bfb6f1de569afd7949b3d3aa07b8dcf1cc7c38b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down/PMOS pull-up operation at both logic levels. The omitted analog analysis is not required for full credit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 8576,
        "input_tokens": 14182,
        "output_tokens": 341,
        "total_tokens": 14523,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 8576,
        "input_tokens": 14182,
        "output_tokens": 341,
        "total_tokens": 14523,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a basic CMOS inverter configuration, which consists of two MOSFETs: M1 (an NMOS transistor) and M2 (a PMOS transistor). Here's an analysis of its operation:\n\n### Components:\n1. **M1 (NMOS)**: This transistor conducts when the gate voltage (Vin) is higher than the threshold voltage (Vth) of the NMOS.\n2. **M2 (PMOS)**: This transistor conducts when the gate voltage (Vin) is lower than the threshold voltage (Vth) of the PMOS.\n\n### Operation:\n- **When Vin is High (Logic 1)**:\n  - M1 turns ON (conducts), pulling Vout to ground (0V).\n  - M2 turns OFF (does not conduct), preventing Vout from being pulled up to VDD.\n  - **Output (Vout)**: 0V (Logic 0).\n\n- **When Vin is Low (Logic 0)**:\n  - M1 turns OFF (does not conduct), preventing Vout from being pulled down to ground.\n  - M2 turns ON (conducts), pulling Vout up to VDD.\n  - **Output (Vout)**: VDD (Logic 1).\n\n### Summary:\n- The circuit acts as an inverter, where the output is the logical complement of the input.\n- It is efficient in terms of power consumption, as only one of the transistors conducts at any given time, minimizing short-circuit current.\n\n### Key Points:\n- **Voltage Levels**: Vout will be either 0V or VDD depending on the state of Vin.\n- **Threshold Voltages**: The operation depends on the threshold voltages of the NMOS and PMOS transistors.\n- **Applications**: This configuration is widely used in digital circuits for logic operations.\n\nThis basic understanding of the CMOS inverter can be expanded upon for more complex circuits and applications.",
        "format": "markdown",
        "sha256": "c83c91f299a91e33b3c0ea5329f2d95cedba9842ff1555c97c2efb4b3160e327"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down, PMOS pull-up, and logic-level behavior. The claim that only one transistor conducts at any time is too broad: both can conduct briefly during a transition.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14182,
        "output_tokens": 395,
        "total_tokens": 14577,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14182,
        "output_tokens": 395,
        "total_tokens": 14577,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a basic CMOS inverter configuration, which consists of two MOSFETs (M1 and M2). Here's a breakdown of its operation:\n\n### Components:\n1. **M1 (PMOS Transistor)**: Connected to the positive supply voltage \\( V_{DD} \\).\n2. **M2 (NMOS Transistor)**: Connected to ground.\n\n### Operation:\n- **Input \\( V_{in} \\)**:\n  - When \\( V_{in} \\) is low (0V), M1 turns on (conducts), and M2 turns off (non-conducting). This pulls \\( V_{out} \\) up to \\( V_{DD} \\).\n  - When \\( V_{in} \\) is high (equal to \\( V_{DD} \\)), M1 turns off, and M2 turns on, pulling \\( V_{out} \\) down to ground (0V).\n\n### Truth Table:\n| \\( V_{in} \\) | \\( V_{out} \\) |\n|--------------|----------------|\n| 0            | \\( V_{DD} \\)   |\n| \\( V_{DD} \\) | 0              |\n\n### Characteristics:\n- **Inversion**: The output is the logical inverse of the input.\n- **Low Power Consumption**: In static conditions (when not switching), the circuit consumes very little power.\n- **High Noise Margin**: CMOS inverters have good noise margins, making them robust against variations in input voltage.\n\n### Applications:\n- Used in digital logic circuits, such as inverters, NAND gates, and NOR gates.\n- Fundamental building block in integrated circuits.\n\n### Summary:\nThis CMOS inverter is a simple yet effective way to achieve logic inversion with minimal power consumption and high noise immunity.",
        "format": "markdown",
        "sha256": "6a12d692c5e03155f102cf7bc6904393235d44b88b2f28ff2eca91a31f91688a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as a PMOS and analyzes the circuit as an ordinary CMOS inverter. Both devices are NMOS, so this violates the golden solution's non-negotiable scoring gate.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14182,
        "output_tokens": 364,
        "total_tokens": 14546,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14182,
        "output_tokens": 364,
        "total_tokens": 14546,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a basic CMOS inverter configuration, which consists of two MOSFETs (M1 and M2). Here's a breakdown of its operation:\n\n### Components:\n1. **M1 (PMOS Transistor)**: Connected to the positive supply voltage \\( V_{DD} \\).\n2. **M2 (NMOS Transistor)**: Connected to ground.\n\n### Operation:\n- **Input \\( V_{in} \\)**:\n  - When \\( V_{in} \\) is low (0V), M1 turns on (conducts), and M2 turns off (non-conducting). This pulls \\( V_{out} \\) up to \\( V_{DD} \\).\n  - When \\( V_{in} \\) is high (equal to \\( V_{DD} \\)), M1 turns off, and M2 turns on, pulling \\( V_{out} \\) down to ground (0V).\n\n### Truth Table:\n| \\( V_{in} \\) | \\( V_{out} \\) |\n|--------------|----------------|\n| 0            | \\( V_{DD} \\)   |\n| \\( V_{DD} \\) | 0              |\n\n### Characteristics:\n- **Inversion**: The output is the logical inverse of the input.\n- **Low Power Consumption**: In static conditions (when not switching), the circuit consumes very little power.\n- **High Noise Margin**: CMOS inverters have good noise margins, making them robust against variations in input voltage.\n\n### Applications:\n- Used in digital logic circuits, such as inverters, NAND gates, and other combinational logic circuits.\n\n### Summary:\nThis CMOS inverter is a fundamental building block in digital electronics, providing efficient logic inversion with minimal power consumption.",
        "format": "markdown",
        "sha256": "89aaa81019fb5fbbdc141c0d1c267095dc00d996ecff7cb408bfeafe0b0552aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as PMOS and analyzes the circuit as an ordinary complementary CMOS inverter; the figure has two NMOS devices.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 8576,
        "input_tokens": 14182,
        "output_tokens": 358,
        "total_tokens": 14540,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 8576,
        "input_tokens": 14182,
        "output_tokens": 358,
        "total_tokens": 14540,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a basic CMOS inverter configuration, which consists of two MOSFETs: M1 (typically a PMOS) and M2 (typically an NMOS). Here's a breakdown of its operation:\n\n### Components:\n1. **M1 (PMOS)**: Conducts when the gate voltage (Vin) is low (close to 0V).\n2. **M2 (NMOS)**: Conducts when the gate voltage (Vin) is high (close to VDD).\n\n### Operation:\n- **When Vin = 0V**:\n  - M1 turns on (conducts), pulling Vout up to VDD.\n  - M2 turns off (non-conducting), preventing current flow to ground.\n  - **Output (Vout)** = VDD.\n\n- **When Vin = VDD**:\n  - M1 turns off (non-conducting), preventing current flow from VDD.\n  - M2 turns on (conducts), pulling Vout down to ground.\n  - **Output (Vout)** = 0V.\n\n### Characteristics:\n- **Inversion**: The output is the logical inverse of the input.\n- **High Input Impedance**: The circuit has high input impedance, which means it draws very little current from the input source.\n- **Low Power Consumption**: In static conditions (when the input is stable), the circuit consumes negligible power.\n\n### Summary:\nThis CMOS inverter is widely used in digital circuits for logic operations, providing a simple and efficient way to achieve signal inversion with minimal power loss.",
        "format": "markdown",
        "sha256": "437e56a5bbe883d0c785c24205fa9413fff99eb27846799ac8f9b75c179aee83"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as a PMOS and analyzes the circuit as an ordinary CMOS inverter, contrary to the required identification that both devices are NMOS.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14182,
        "output_tokens": 320,
        "total_tokens": 14502,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 14182,
        "output_tokens": 320,
        "total_tokens": 14502,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a basic CMOS inverter configuration, which consists of two MOSFETs: M1 (typically an n-channel MOSFET) and M2 (typically a p-channel MOSFET). Here's a breakdown of its operation:\n\n### Components:\n1. **M1 (n-channel MOSFET)**: Conducts when the input voltage \\( V_{in} \\) is high (close to \\( V_{DD} \\)).\n2. **M2 (p-channel MOSFET)**: Conducts when the input voltage \\( V_{in} \\) is low (close to ground).\n\n### Operation:\n- **When \\( V_{in} \\) is High**:\n  - M1 turns on, allowing current to flow from \\( V_{DD} \\) to ground through M1.\n  - M2 turns off, preventing current from flowing from \\( V_{DD} \\) to \\( V_{out} \\).\n  - Therefore, \\( V_{out} \\) is pulled down to ground (logic low).\n\n- **When \\( V_{in} \\) is Low**:\n  - M1 turns off, stopping current flow from \\( V_{DD} \\) to ground.\n  - M2 turns on, allowing current to flow from \\( V_{DD} \\) to \\( V_{out} \\).\n  - Thus, \\( V_{out} \\) is pulled up to \\( V_{DD} \\) (logic high).\n\n### Characteristics:\n- **Inverter Functionality**: The circuit inverts the input signal.\n- **Low Power Consumption**: In static conditions (when not switching), the circuit consumes very little power.\n- **High Noise Margin**: CMOS inverters have good noise margins, making them robust against variations in input voltage.\n\n### Summary:\nThis circuit is a fundamental building block in digital electronics, commonly used in logic gates and integrated circuits. Its ability to efficiently switch between high and low states makes it essential for modern digital systems.",
        "format": "markdown",
        "sha256": "c5339f159f731df24b37231acb8976500b33403cb48c25e95aa5acc7ba8db0e8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the NMOS/PMOS device types and an inverting function, but misidentifies the circuit as a CMOS inverter. M2 is diode-connected to Vout, not driven by Vin, so the stated switching behavior is wrong and the answer misses the stage's gain analysis.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 406,
        "total_tokens": 25922,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 406,
        "total_tokens": 25922,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a basic CMOS inverter configuration, consisting of two MOSFETs: M1 (typically an n-channel MOSFET) and M2 (typically a p-channel MOSFET). Here's a breakdown of its operation:\n\n### Components:\n1. **M1 (n-channel MOSFET)**: Conducts when the gate voltage (Vin) is high (above the threshold voltage).\n2. **M2 (p-channel MOSFET)**: Conducts when the gate voltage (Vin) is low (below the threshold voltage).\n\n### Operation:\n- **When Vin is High**:\n  - M1 turns on, allowing current to flow from VDD to ground through M1.\n  - M2 turns off, preventing current from flowing from VDD to Vout.\n  - **Vout** will be close to 0V (logic low).\n\n- **When Vin is Low**:\n  - M1 turns off, stopping current flow from VDD to ground.\n  - M2 turns on, allowing current to flow from VDD to Vout.\n  - **Vout** will be close to VDD (logic high).\n\n### Characteristics:\n- **Inverter Functionality**: The circuit inverts the input signal. When Vin is high, Vout is low, and vice versa.\n- **Power Consumption**: The circuit consumes power primarily during the switching transitions. In steady states (either high or low), the power consumption is minimal.\n- **Noise Margins**: CMOS inverters typically have good noise margins, making them robust against variations in input voltage.\n\n### Summary:\nThis circuit is a fundamental building block in digital electronics, used for creating logic gates and more complex circuits. Its simplicity and efficiency make it widely used in integrated circuits.",
        "format": "markdown",
        "sha256": "55c2f4770e54f276c160ce470cdf1c6d8128a2210a9039999b42610202053270"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer mistakes the diode-connected PMOS load for a CMOS inverter with both gates driven by Vin. Its operating description and digital-inverter claims do not analyze the actual common-source stage or its gain.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 360,
        "total_tokens": 25876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 360,
        "total_tokens": 25876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a basic CMOS inverter configuration, consisting of two MOSFETs: M1 (typically an n-channel MOSFET) and M2 (typically a p-channel MOSFET). Here's a breakdown of its operation:\n\n### Components:\n1. **M1 (n-channel MOSFET)**: This transistor conducts when the input voltage \\( V_{in} \\) is high (close to \\( V_{DD} \\)).\n2. **M2 (p-channel MOSFET)**: This transistor conducts when the input voltage \\( V_{in} \\) is low (close to ground).\n\n### Operation:\n- **When \\( V_{in} \\) is High**:\n  - M1 turns on, allowing current to flow from \\( V_{DD} \\) through M2 to ground.\n  - M2 turns off, resulting in \\( V_{out} \\) being pulled down to ground (logic low).\n\n- **When \\( V_{in} \\) is Low**:\n  - M1 turns off, stopping current flow from \\( V_{DD} \\).\n  - M2 turns on, allowing current to flow from \\( V_{DD} \\) to \\( V_{out} \\), pulling \\( V_{out} \\) up to \\( V_{DD} \\) (logic high).\n\n### Characteristics:\n- **Inversion**: The output voltage \\( V_{out} \\) is the inverse of the input voltage \\( V_{in} \\).\n- **Power Consumption**: The circuit consumes power primarily during switching. In steady states (either high or low), the power consumption is minimal.\n- **Noise Margin**: CMOS inverters typically have good noise margins, making them robust against small fluctuations in input voltage.\n\n### Summary:\nThis circuit is a fundamental building block in digital electronics, used for creating logic gates and more complex circuits. Its simplicity and efficiency make it widely used in integrated circuits.",
        "format": "markdown",
        "sha256": "45489a998184ea1c97436dca38a15aeae539e3572e2e671022e64ed4fb7e7bfd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a CMOS inverter, incorrectly treating both gates as driven by Vin. M2 is diode-connected, so the operating description and analysis do not apply to the shown topology.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 394,
        "total_tokens": 25910,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 394,
        "total_tokens": 25910,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can identify the components and their configuration. The circuit consists of two MOSFETs (M1 and M2) and a voltage source (VDD) connected to the drain of M2. Here's a breakdown of the analysis:\n\n### Components:\n1. **M1**: This is likely a PMOS transistor, as it is connected to ground and typically used for pulling down the output.\n2. **M2**: This is likely an NMOS transistor, connected to VDD, which is used for pulling up the output.\n3. **Vin**: This is the input voltage that controls the gate of M2.\n4. **Vout**: This is the output voltage taken from the junction between M1 and M2.\n\n### Operation:\n1. **When Vin is High**:\n   - M2 (NMOS) turns ON, allowing current to flow from VDD to Vout.\n   - M1 (PMOS) is OFF because the gate-source voltage is negative, preventing current from flowing to ground.\n   - Therefore, Vout will be approximately equal to VDD.\n\n2. **When Vin is Low**:\n   - M2 (NMOS) turns OFF, stopping current flow from VDD.\n   - M1 (PMOS) turns ON, allowing current to flow from Vout to ground.\n   - Vout will be pulled down to ground (0V).\n\n### Summary:\n- The circuit acts as a basic inverter:\n  - **High Vin** results in **High Vout** (close to VDD).\n  - **Low Vin** results in **Low Vout** (close to 0V).\n\n### Key Points:\n- The circuit uses complementary MOSFETs to achieve efficient switching.\n- The output voltage is determined by the state of the input voltage.\n- This configuration is commonly used in digital logic circuits for inverting signals.\n\nIf you have specific parameters or conditions you'd like to analyze further, please provide them!",
        "format": "markdown",
        "sha256": "b95be537e750d29a5e16fe292ba6dbe8ca63665433ebdf2827573787d21611ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies both devices and the topology as a complementary CMOS inverter. In fact, both are PMOS: M2 is the common-source input device and M1 is a diode-connected PMOS load, giving approximately −gm2/gm1 gain.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 408,
        "total_tokens": 25924,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 408,
        "total_tokens": 25924,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can identify the components and their configuration. The circuit consists of two MOSFETs (M1 and M2) and a voltage source (VDD) connected to the drain of M2. Here's a breakdown of the analysis:\n\n### Components:\n1. **M1 and M2**: These are likely NMOS or PMOS transistors. The behavior will depend on their type.\n2. **VDD**: This is the supply voltage connected to the drain of M2.\n3. **Vin**: This is the input voltage applied to the gate of M2.\n4. **Vout**: This is the output voltage taken from the source of M2.\n\n### Operation:\n1. **M2 (Upper Transistor)**:\n   - If M2 is an NMOS, it will conduct when Vin exceeds the threshold voltage (Vth). This allows current to flow from VDD to Vout.\n   - If M2 is a PMOS, it will conduct when Vin is below a certain level (typically VDD - Vth).\n\n2. **M1 (Lower Transistor)**:\n   - M1 is connected to ground. Its operation will depend on the voltage at Vout and the type of transistor.\n   - If M1 is NMOS, it will conduct when Vout is above its threshold voltage.\n   - If M1 is PMOS, it will conduct when Vout is below a certain level.\n\n### Output Voltage (Vout):\n- The output voltage Vout will depend on the states of M1 and M2:\n  - If M2 is on and M1 is off, Vout will be close to VDD.\n  - If M2 is off, Vout will be pulled down by M1 if it is on.\n  - If both are on, Vout will be determined by the load connected to it.\n\n### Key Points:\n- The circuit can function as a switch or amplifier depending on the input conditions.\n- The relationship between Vin and Vout will depend on the characteristics of M1 and M2 (NMOS vs. PMOS).\n- The circuit can be analyzed further using the MOSFET equations to determine the exact behavior under different input conditions.\n\n### Conclusion:\nTo fully analyze the circuit, you would need to know the type of MOSFETs used, their threshold voltages, and any load connected to Vout. This will allow for a more detailed understanding of the circuit's behavior in various scenarios.",
        "format": "markdown",
        "sha256": "783fb4667855af75044ced5bf77e07738fb6b00f2bcb623e92ef5643bd144453"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer does not identify the two PMOS devices or the diode-connected PMOS load, and it gives a generic switch analysis instead of the gm/gm amplifier behavior. It also misstates the circuit connections and concludes that more device-type information is needed.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 511,
        "total_tokens": 26027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 511,
        "total_tokens": 26027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can identify the components and their configuration. The circuit consists of two MOSFETs (M1 and M2) and a voltage source (VDD) connected to the drain of M2. Here's a breakdown of the analysis:\n\n### Components:\n1. **M1 and M2**: These are likely NMOS or PMOS transistors. The behavior of the circuit will depend on their type.\n2. **Vin**: This is the input voltage applied to the gate of M2.\n3. **Vout**: This is the output voltage taken from the drain of M2.\n4. **VDD**: This is the supply voltage connected to the drain of M2.\n\n### Operation:\n1. **M2 (Upper Transistor)**:\n   - If M2 is an NMOS, it will turn on when Vin exceeds the threshold voltage (Vth). This allows current to flow from VDD to Vout.\n   - If M2 is a PMOS, it will turn on when Vin is below a certain level (typically when Vin is low).\n\n2. **M1 (Lower Transistor)**:\n   - M1 is connected to ground. Its operation will depend on the configuration and the type of M1.\n   - If M1 is NMOS, it will turn on when the gate voltage is high enough, pulling Vout down to ground.\n   - If M1 is PMOS, it will turn on when the gate voltage is low, affecting the output voltage accordingly.\n\n### Output Voltage (Vout):\n- The output voltage Vout will depend on the states of M1 and M2:\n  - If M2 is on and M1 is off, Vout will be close to VDD.\n  - If M2 is off, Vout will be pulled down by M1 if it is on.\n  - If both are on, the output voltage will depend on the relative sizes and characteristics of the transistors.\n\n### Summary:\n- The circuit can function as a switch or amplifier depending on the input voltage (Vin) and the characteristics of the MOSFETs.\n- The specific behavior (e.g., switching thresholds, output voltage levels) will depend on the transistor types (NMOS or PMOS), their threshold voltages, and their sizes.\n\n### Further Analysis:\n- To perform a more detailed analysis, you would typically need to know the threshold voltages, the sizes of the transistors, and any load connected to Vout.\n- You could also analyze the circuit using small-signal models if you're interested in its behavior in the linear region for amplification purposes.",
        "format": "markdown",
        "sha256": "09556458c768ccc64ff38e4178465af7a6a9b130ac3bfa6f6250efbaf2d9c9a3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer does not identify the two PMOS devices or recognize M1 as a diode-connected PMOS load. It instead treats the device types and behavior as unknown and describes a generic switch, missing the gm/gm amplifier and its gain.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 538,
        "total_tokens": 26054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 538,
        "total_tokens": 26054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find \\( R_{out} \\) in the given circuit with MOSFETs \\( M_1 \\) and \\( M_2 \\), we can analyze the circuit based on the configuration of the transistors and their operating regions.\n\n### Steps to Determine \\( R_{out} \\):\n\n1. **Identify the Configuration**:\n   - The circuit appears to be a differential pair with a common source configuration. \\( M_1 \\) and \\( M_2 \\) are likely operating in saturation.\n\n2. **Determine the Output Resistance of Each Transistor**:\n   - The output resistance of a MOSFET in saturation can be approximated as:\n     \\[\n     r_{o} = \\frac{1}{\\lambda I_D}\n     \\]\n     where \\( \\lambda \\) is the channel length modulation parameter and \\( I_D \\) is the drain current.\n\n3. **Calculate \\( R_{out} \\)**:\n   - If both transistors are matched and operating in saturation, the output resistance seen at the output node (considering both transistors) can be expressed as:\n     \\[\n     R_{out} = r_{o1} \\parallel r_{o2}\n     \\]\n   - If \\( r_{o1} \\) and \\( r_{o2} \\) are equal (for matched transistors), then:\n     \\[\n     R_{out} = \\frac{r_{o}}{2}\n     \\]\n\n4. **Consider the Biasing**:\n   - The bias voltages \\( V_{b1} \\) and \\( V_{b2} \\) will affect the drain currents \\( I_{D1} \\) and \\( I_{D2} \\), which in turn will influence \\( r_{o} \\).\n\n### Final Expression:\nThus, the output resistance \\( R_{out} \\) can be approximated as:\n\\[\nR_{out} = \\frac{1}{\\lambda I_D} \\text{ (for each transistor)} \\quad \\text{and} \\quad R_{out} = \\frac{r_{o}}{2} \\text{ (for matched transistors)}\n\\]\n\n### Conclusion:\nTo find the exact numerical value of \\( R_{out} \\), you would need the specific values of \\( \\lambda \\) and \\( I_D \\) for the transistors in the circuit.",
        "format": "markdown",
        "sha256": "68d4031fdc97cb1ee9aaa8faff5bc206386cca13a219ff2eccc0f22ec1caf548"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the circuit as a differential pair and gives a parallel-\u0010 resistance, missing the PMOS cascode topology and its much larger output resistance.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25514,
        "output_tokens": 492,
        "total_tokens": 26006,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25514,
        "output_tokens": 492,
        "total_tokens": 26006,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find \\( R_{out} \\) in the given circuit with MOSFETs \\( M_1 \\) and \\( M_2 \\), we can analyze the circuit based on the configuration of the transistors and their operating regions.\n\n### Steps to Determine \\( R_{out} \\):\n\n1. **Identify the Configuration**:\n   - The circuit appears to be a differential pair configuration with \\( M_1 \\) and \\( M_2 \\).\n   - \\( V_{b1} \\) and \\( V_{b2} \\) are the gate voltages for \\( M_1 \\) and \\( M_2 \\), respectively.\n\n2. **Assume Operating Regions**:\n   - For \\( M_1 \\) and \\( M_2 \\) to operate in saturation, the gate-source voltage \\( V_{GS} \\) must be greater than the threshold voltage \\( V_{th} \\).\n   - Ensure that both transistors are in saturation for the analysis.\n\n3. **Small-Signal Model**:\n   - If you are looking for small-signal output resistance, you can replace \\( M_1 \\) and \\( M_2 \\) with their small-signal models.\n   - The output resistance \\( R_{out} \\) can be approximated as the parallel combination of the output resistances of \\( M_1 \\) and \\( M_2 \\).\n\n4. **Output Resistance Calculation**:\n   - The output resistance of a MOSFET in saturation can be expressed as:\n     \\[\n     r_{o} = \\frac{1}{\\lambda I_D}\n     \\]\n     where \\( \\lambda \\) is the channel length modulation parameter and \\( I_D \\) is the drain current.\n   - Therefore, the total output resistance \\( R_{out} \\) can be given by:\n     \\[\n     R_{out} = r_{o1} \\parallel r_{o2}\n     \\]\n   - If \\( r_{o1} \\) and \\( r_{o2} \\) are equal, then:\n     \\[\n     R_{out} = \\frac{r_{o}}{2}\n     \\]\n\n5. **Final Expression**:\n   - Substitute the values of \\( r_{o1} \\) and \\( r_{o2} \\) based on the specific parameters of the MOSFETs used in the circuit.\n\n### Conclusion:\nThe output resistance \\( R_{out} \\) can be calculated based on the small-signal model of the MOSFETs and their respective output resistances. If you have specific values for \\( I_D \\) and \\( \\lambda \\), you can compute \\( R_{out} \\) numerically.",
        "format": "markdown",
        "sha256": "53b6dcd074f562e28470b995ea6d35ce0485224dc3bfebdb5264eea73d333ed5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the circuit as a differential pair and treats the output resistance as a parallel combination of ro values, missing the PMOS cascode topology and its much larger cascode-enhanced output resistance.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25514,
        "output_tokens": 560,
        "total_tokens": 26074,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25514,
        "output_tokens": 560,
        "total_tokens": 26074,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find \\( R_{out} \\) in the given circuit, we need to analyze the configuration of the transistors \\( M_1 \\) and \\( M_2 \\) and how they interact with the output node.\n\n### Steps to Determine \\( R_{out} \\):\n\n1. **Identify the Configuration**: \n   - The circuit consists of two MOSFETs, \\( M_1 \\) and \\( M_2 \\), with their gates connected to \\( V_{b1} \\) and \\( V_{b2} \\), respectively.\n   - The output \\( R_{out} \\) is connected to the drain of \\( M_1 \\).\n\n2. **Determine the Operating Regions**:\n   - Check the gate-source voltages \\( V_{GS1} = V_{b1} - V_{X} \\) for \\( M_1 \\) and \\( V_{GS2} = V_{b2} - V_{DD} \\) for \\( M_2 \\).\n   - Ensure that both transistors are in saturation or cutoff, depending on the biasing conditions.\n\n3. **Calculate \\( R_{out} \\)**:\n   - If both transistors are in saturation, the output resistance can be approximated using the transconductance parameters \\( g_{m1} \\) and \\( g_{m2} \\) of the MOSFETs:\n     \\[\n     R_{out} \\approx \\frac{1}{g_{m1}} \\parallel \\frac{1}{g_{m2}}\n     \\]\n   - If one of the transistors is in cutoff, \\( R_{out} \\) will be dominated by the active transistor.\n\n4. **Consider Load Effects**:\n   - If there are any load resistances connected to the output, they should also be included in the calculation of \\( R_{out} \\).\n\n### Final Expression:\nThe final expression for \\( R_{out} \\) will depend on the specific parameters of the MOSFETs and the biasing voltages. If you have specific values for \\( V_{b1} \\), \\( V_{b2} \\), and the transconductance parameters, you can substitute them into the equations to find a numerical value for \\( R_{out} \\). \n\nIf you need further assistance with specific values or conditions, please provide those details!",
        "format": "markdown",
        "sha256": "d007df328994e1db60ac31b4aafe1a2c10da0c6f8a1627845323c5d9ddc30232"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer gives an incorrect inverse-\u001fgm\u001f parallel approximation and misses the cascode mechanism: M1 boosts the output resistance to roughly \u001fgm1 ro1 ro2\u001f (with the fuller expression including \u001fro1\u001f and \u001fro2\u001f).",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25514,
        "output_tokens": 487,
        "total_tokens": 26001,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25514,
        "output_tokens": 487,
        "total_tokens": 26001,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that transistor \\( M_2 \\) is in saturation in the given circuit, you need to satisfy the following conditions:\n\n1. **Gate-Source Voltage (Vgs)**: The gate-source voltage \\( V_{gs2} \\) of \\( M_2 \\) must be greater than the threshold voltage \\( V_{th} \\) of the transistor. This can be expressed as:\n   \\[\n   V_{gs2} = V_{b2} - V_{s2} > V_{th}\n   \\]\n   where \\( V_{s2} \\) is the source voltage of \\( M_2 \\).\n\n2. **Drain-Source Voltage (Vds)**: The drain-source voltage \\( V_{ds2} \\) must be greater than the saturation voltage, which is typically defined as:\n   \\[\n   V_{ds2} > V_{gs2} - V_{th}\n   \\]\n   This ensures that \\( M_2 \\) remains in saturation.\n\n3. **Biasing Conditions**: Ensure that \\( V_{b2} \\) is sufficiently high to keep \\( M_2 \\) in saturation. The biasing voltage \\( V_{b2} \\) should be set such that it maintains the required \\( V_{gs2} \\) and \\( V_{ds2} \\) conditions.\n\n4. **Load Conditions**: The load connected to the drain of \\( M_2 \\) (in this case, \\( R_{out} \\)) should not pull the drain voltage too low, which could push \\( M_2 \\) out of saturation.\n\nBy carefully selecting \\( V_{b2} \\) and ensuring that the load conditions are appropriate, you can keep \\( M_2 \\) in saturation.",
        "format": "markdown",
        "sha256": "19b348537222e48b27475c8963cba40bb67b8a272f47d1305638056e2e5e6678"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer applies NMOS saturation conditions, but both devices are PMOS. It also treats Vb2 and loading as the controls, missing that VX is set by Vb1 and must satisfy the PMOS saturation condition.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25522,
        "output_tokens": 364,
        "total_tokens": 25886,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25522,
        "output_tokens": 364,
        "total_tokens": 25886,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that transistor \\( M_2 \\) is in saturation in the given circuit, you need to satisfy the following conditions:\n\n1. **Gate-Source Voltage (Vgs)**: The gate-source voltage \\( V_{gs2} \\) of \\( M_2 \\) must be greater than the threshold voltage \\( V_{th} \\) of the transistor. This can be expressed as:\n   \\[\n   V_{gs2} = V_{b2} - V_{s2} > V_{th}\n   \\]\n   where \\( V_{s2} \\) is the source voltage of \\( M_2 \\).\n\n2. **Drain-Source Voltage (Vds)**: The drain-source voltage \\( V_{ds2} \\) must be greater than the saturation voltage, which is typically defined as:\n   \\[\n   V_{ds2} = V_{d2} - V_{s2} > V_{gs2} - V_{th}\n   \\]\n   where \\( V_{d2} \\) is the drain voltage of \\( M_2 \\).\n\n3. **Biasing Conditions**: Ensure that \\( V_{b2} \\) is sufficiently high to keep \\( M_2 \\) in saturation. This often involves setting \\( V_{b2} \\) to a value that ensures \\( V_{gs2} \\) is above \\( V_{th} \\) and adjusting \\( V_{d2} \\) accordingly.\n\n4. **Load Conditions**: The load connected to the drain of \\( M_2 \\) (in this case, \\( R_{out} \\)) should not pull the drain voltage too low, which could push \\( M_2 \\) out of saturation.\n\nBy carefully selecting \\( V_{b2} \\), \\( V_{d2} \\), and ensuring the load conditions are appropriate, you can maintain \\( M_2 \\) in saturation.",
        "format": "markdown",
        "sha256": "035937bdf9250c53f0995b68033b315987943f4b548c50045d8bb788c9f90bba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer applies NMOS saturation conditions to PMOS M2 and treats Vb2 and the load as the controls, missing that VX is set mainly by Vb1 and the resulting condition on Vb1. It shows only generic awareness that saturation depends on bias and drain-source voltage.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25522,
        "output_tokens": 396,
        "total_tokens": 25918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25522,
        "output_tokens": 396,
        "total_tokens": 25918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that transistor \\( M_2 \\) is in saturation in the given circuit, you need to satisfy the following conditions:\n\n1. **Gate-Source Voltage (Vgs)**: The gate-source voltage \\( V_{gs2} \\) of \\( M_2 \\) must be greater than the threshold voltage \\( V_{th} \\) of the transistor. This means:\n   \\[\n   V_{gs2} = V_{b2} - V_{s2} > V_{th}\n   \\]\n   where \\( V_{s2} \\) is the source voltage of \\( M_2 \\).\n\n2. **Drain-Source Voltage (Vds)**: The drain-source voltage \\( V_{ds2} \\) must be greater than the saturation voltage, which is typically defined as:\n   \\[\n   V_{ds2} > V_{gs2} - V_{th}\n   \\]\n   This ensures that \\( M_2 \\) remains in saturation.\n\n3. **Biasing Conditions**: Ensure that \\( V_{b2} \\) is sufficiently high to keep \\( M_2 \\) in saturation. You may need to adjust \\( V_{b2} \\) based on the operating conditions of the circuit.\n\n4. **Load Conditions**: The load connected to the drain of \\( M_2 \\) (in this case, \\( R_{out} \\)) should not pull the drain voltage too low, which could push \\( M_2 \\) out of saturation.\n\nBy carefully selecting \\( V_{b2} \\) and ensuring that the load conditions are appropriate, you can maintain \\( M_2 \\) in saturation.",
        "format": "markdown",
        "sha256": "d64d273537fe8ae0fdfe7c2e2d047e3368b4349f8d1de43b9b29b77025196cde"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer applies NMOS saturation conditions, but both devices are PMOS. It also misses that M1 sets VX and therefore gives the key condition on Vb1; adjusting Vb2 alone is not the required design condition.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25522,
        "output_tokens": 343,
        "total_tokens": 25865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25522,
        "output_tokens": 343,
        "total_tokens": 25865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their interactions. The circuit consists of two MOSFETs (M1 and M2), a current source (I1), and voltage sources (Vb1 and Vin). Here’s a step-by-step analysis:\n\n### Components:\n1. **Current Source (I1)**: Provides a constant current to the circuit.\n2. **MOSFETs (M1 and M2)**: These are the active devices that control the flow of current based on the gate voltages.\n3. **Voltage Sources (Vb1 and Vin)**: These provide the necessary gate voltages to turn the MOSFETs on or off.\n\n### Operation:\n1. **MOSFET M1**:\n   - The gate voltage for M1 is Vin. If Vin exceeds the threshold voltage (Vth) of M1, it will turn on, allowing current to flow from the drain to the source.\n   - The output voltage (Vout) will depend on the state of M1 and the current flowing through it.\n\n2. **MOSFET M2**:\n   - The gate voltage for M2 is Vb1. Similar to M1, if Vb1 exceeds its threshold voltage, M2 will turn on.\n   - M2 is likely configured to control the output voltage based on the current flowing through M1.\n\n### Analysis Steps:\n1. **Determine the Operating Regions**:\n   - Check if M1 and M2 are in saturation or triode region based on their gate-source voltages and the drain-source voltages.\n   - Use the MOSFET equations to find the drain current (Id) for both M1 and M2.\n\n2. **Calculate Vout**:\n   - Vout can be expressed in terms of the currents through M1 and M2 and their respective drain-source voltages.\n   - If M1 is on and M2 is off, Vout will be close to ground. If both are on, Vout will depend on the current through M2.\n\n3. **Biasing Conditions**:\n   - Ensure that Vb1 and Vin are set correctly to keep the MOSFETs in their desired operating regions.\n\n### Conclusion:\nThe output voltage (Vout) will be influenced by the input voltage (Vin) and the bias voltage (Vb1). The circuit can function as an amplifier or switch depending on the configuration and the values of the input and bias voltages. Further calculations would require specific values for the voltages and the characteristics of the MOSFETs used.",
        "format": "markdown",
        "sha256": "be521d429e262bfe9a4bb73ab59b4c21b5574bc04246bc12524434a10d02df3f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer does not identify M1 as the common-source NMOS or M2 as the common-gate NMOS cascode, and gives no small-signal gain analysis. Its generic switching discussion misses the circuit’s essential amplifier operation.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 531,
        "total_tokens": 26047,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 531,
        "total_tokens": 26047,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their functions. The circuit appears to be a differential amplifier or a similar configuration using MOSFETs (M1 and M2). Here’s a step-by-step analysis:\n\n### Components:\n1. **Transistors (M1 and M2)**: These are likely MOSFETs used for amplification. The gate voltages are controlled by \\( V_{b1} \\) and \\( V_{in} \\).\n2. **Current Source (\\( I_1 \\))**: This provides a constant current to the circuit, which is essential for biasing the transistors.\n3. **Supply Voltage (\\( V_{DD} \\))**: This is the power supply for the circuit.\n4. **Output Voltage (\\( V_{out} \\))**: This is the voltage taken from the drain of one of the transistors, typically representing the amplified signal.\n\n### Analysis Steps:\n1. **Biasing**: The transistors need to be properly biased to operate in the saturation region for amplification. The gate-source voltages (\\( V_{gs} \\)) of M1 and M2 will determine their operating states.\n   \n2. **Input Voltage (\\( V_{in} \\))**: This voltage is applied to the gate of M1. The behavior of M1 will depend on how \\( V_{in} \\) compares to \\( V_{b1} \\).\n\n3. **Operation of M1 and M2**:\n   - If \\( V_{in} > V_{b1} \\), M1 will turn on, allowing current to flow through it.\n   - M2 will also turn on if its gate-source voltage is sufficient, allowing it to conduct and affect \\( V_{out} \\).\n\n4. **Output Voltage (\\( V_{out} \\))**: The output voltage will depend on the current flowing through M2, which is influenced by the difference between \\( V_{in} \\) and \\( V_{b1} \\). The output can be expressed as:\n   \\[\n   V_{out} = V_{DD} - I_{D2} \\cdot R_D\n   \\]\n   where \\( I_{D2} \\) is the drain current of M2 and \\( R_D \\) is the load resistance connected to the drain of M2.\n\n5. **Small-Signal Analysis**: If the circuit is used for small-signal amplification, you can linearize the circuit around a bias point and analyze the small-signal parameters (transconductance, output resistance, etc.).\n\n### Conclusion:\nThe circuit functions as a differential amplifier or a similar configuration, where the output voltage is a function of the input voltage and the biasing conditions. The precise behavior will depend on the specific values of \\( V_{b1} \\), \\( V_{in} \\), and the characteristics of the MOSFETs used. Further calculations would require specific parameters such as threshold voltages, transconductance, and load resistance.",
        "format": "markdown",
        "sha256": "d0540716473c9ac6463a2ad25189cefd652ab5b32dfc7c098f97a23243511b23"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misses the NMOS cascode topology and its gain mechanism, mischaracterizes the circuit as a differential amplifier, and invents a resistive load instead of analyzing the current-source-loaded output. It provides no valid cascode gain result.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 625,
        "total_tokens": 26141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 625,
        "total_tokens": 26141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their interactions. The circuit consists of two MOSFETs (M1 and M2), a current source (I1), and voltage sources (Vb1 and Vin). Here’s a step-by-step analysis:\n\n### Components:\n1. **Current Source (I1)**: Provides a constant current to the circuit.\n2. **MOSFETs (M1 and M2)**: These are the active devices that control the flow of current based on the gate voltages.\n3. **Voltage Sources (Vb1 and Vin)**: These provide the necessary gate voltages for the MOSFETs.\n\n### Operation:\n1. **Biasing**: \n   - The voltage \\( V_{b1} \\) is applied to the gate of MOSFET M2, which sets its operating point.\n   - The input voltage \\( V_{in} \\) is applied to the gate of MOSFET M1.\n\n2. **MOSFET M1**:\n   - M1 operates in saturation or triode region depending on \\( V_{in} \\) and the threshold voltage \\( V_{th} \\).\n   - If \\( V_{in} \\) exceeds \\( V_{th} \\), M1 turns on, allowing current to flow through it.\n\n3. **MOSFET M2**:\n   - M2 is controlled by \\( V_{b1} \\). If \\( V_{b1} \\) is sufficient to turn on M2, it will allow current to flow from the drain to the source.\n   - The output voltage \\( V_{out} \\) is taken from the drain of M2.\n\n### Analysis:\n- **Output Voltage (\\( V_{out} \\))**: The output voltage will depend on the state of both MOSFETs. If both are on, \\( V_{out} \\) will be influenced by the current flowing through M2 and the voltage drop across it.\n- **Current Flow**: The current through M1 will affect the gate voltage of M2, which in turn influences \\( V_{out} \\).\n- **Load Conditions**: The behavior of the circuit will also depend on any load connected to \\( V_{out} \\).\n\n### Key Equations:\n1. **MOSFET Current Equation**: For saturation:\n   \\[\n   I_D = \\frac{1}{2} k_n (V_{GS} - V_{th})^2\n   \\]\n   where \\( k_n \\) is the transconductance parameter, \\( V_{GS} \\) is the gate-source voltage, and \\( V_{th} \\) is the threshold voltage.\n\n2. **Output Voltage**: \n   \\[\n   V_{out} = V_{DD} - I_D \\cdot R_D\n   \\]\n   where \\( R_D \\) is the drain resistor (if present).\n\n### Conclusion:\nThe circuit functions as a basic amplifier or switch depending on the input conditions. The precise behavior will depend on the values of \\( V_{b1} \\), \\( V_{in} \\), and the characteristics of the MOSFETs used. Further analysis may involve small-signal models if the circuit is used in an AC application.",
        "format": "markdown",
        "sha256": "f82fe7ac4c67d57a5c9d0c271e9aa2a9577aae729058e282d151a4e0f2f2c435"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that Vin drives M1, Vb1 biases M2, and Vout is at M2’s drain, but it misses the NMOS common-source/cascode topology and provides no small-signal gain analysis. Its claim that M1’s current affects M2’s gate voltage is incorrect, and the drain-resistor equation does not match the current-source load.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 679,
        "total_tokens": 26195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 679,
        "total_tokens": 26195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit shown is a cascode structure. In this configuration, transistor \\( M_1 \\) is the input transistor, and transistor \\( M_2 \\) is the cascode transistor. The cascode arrangement improves the output impedance and bandwidth of the amplifier while providing better isolation between the input and output stages.",
        "format": "markdown",
        "sha256": "7fb1387598199feca7a716638286e40921c075715da62669a6ef01a5615dc060"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode; M1 is a PMOS source follower, so the structure lacks cascode output-resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25520,
        "output_tokens": 65,
        "total_tokens": 25585,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25520,
        "output_tokens": 65,
        "total_tokens": 25585,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit shown is a cascode structure. In this configuration, transistor \\( M_1 \\) is the input transistor, and transistor \\( M_2 \\) is the cascode transistor. The cascode arrangement helps improve the gain and bandwidth of the amplifier while providing better isolation between the input and output. The output is taken from the drain of \\( M_2 \\), which is characteristic of cascode amplifiers.",
        "format": "markdown",
        "sha256": "2b59f229298028a045ee8143c92f4dcabcac3351788b28ea76325b315a367246"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Incorrectly calls the circuit a cascode. M1 is a PMOS source follower, not a common-source input device, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25520,
        "output_tokens": 87,
        "total_tokens": 25607,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25520,
        "output_tokens": 87,
        "total_tokens": 25607,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit shown is a cascode structure. In this configuration, transistor \\( M_1 \\) is the input transistor, and transistor \\( M_2 \\) is the cascode transistor. The cascode arrangement improves the output impedance and bandwidth of the amplifier while providing better isolation between the input and output stages. The output is taken from the drain of \\( M_2 \\), which is characteristic of cascode configurations.",
        "format": "markdown",
        "sha256": "7e3f97ff16e7b6101557fce82701299f0565c7efc59e861a2bd710244c373a4f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The central conclusion is wrong: M1 is a PMOS source follower with its drain grounded, not a common-source input transistor feeding a cascode. Thus the circuit lacks cascode output-resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25520,
        "output_tokens": 87,
        "total_tokens": 25607,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25520,
        "output_tokens": 87,
        "total_tokens": 25607,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect refers to the phenomenon where the input capacitance of an amplifier is increased due to the feedback capacitance between its input and output. This effect is particularly significant in amplifiers with high voltage gain, as the feedback capacitance is multiplied by the gain, leading to a larger effective input capacitance.\n\nIn a cascode configuration, which typically consists of two transistors stacked on top of each other, the Miller effect is less pronounced for several reasons:\n\n1. **Reduced Voltage Gain**: In a cascode configuration, the voltage gain of the overall circuit is typically lower than that of a single transistor amplifier. The cascode arrangement helps to isolate the input from the output, which reduces the effective gain seen by the feedback capacitance. Since the Miller effect is proportional to the gain, a lower gain results in a smaller Miller capacitance.\n\n2. **Isolation of Input and Output**: The cascode configuration provides better isolation between the input and output stages. The transistor at the bottom (input transistor) is not directly influenced by the output voltage swing of the upper transistor (output transistor). This isolation reduces the feedback capacitance effect, thereby mitigating the Miller effect.\n\n3. **Lower Effective Capacitance**: In a cascode, the output capacitance of the input transistor is not directly coupled to the input of the amplifier. Instead, the output capacitance is seen as being connected to the gate of the cascode transistor, which has a lower voltage swing compared to the output of a single transistor amplifier. This results in a lower effective capacitance at the input.\n\n4. **Improved Frequency Response**: The cascode configuration enhances the frequency response of the amplifier by reducing the Miller capacitance, which allows for higher bandwidth. This is particularly beneficial in high-frequency applications where the Miller effect can severely limit performance.\n\nIn summary, the cascode configuration reduces the Miller effect due to its lower voltage gain, better isolation between input and output, and lower effective capacitance at the input. This makes cascode amplifiers more suitable for applications requiring high frequency and improved performance.",
        "format": "markdown",
        "sha256": "f326212cb9463f9f9c90933c195cc9d5745d1d2d1049c7e2dfb2b4e53d97af13"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that cascode isolation reduces the swing seen by the input transistor’s capacitance, but misses the key low-impedance drain-of-M1/source-of-M2 node and incorrectly claims the overall cascode gain is lower and that the capacitance connects to M2’s gate.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 418,
        "total_tokens": 438,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 418,
        "total_tokens": 438,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect refers to the phenomenon where the input capacitance of an amplifier is increased due to the feedback capacitance between its input and output. This effect is particularly significant in amplifiers with high voltage gain, as the feedback capacitance is multiplied by the gain, leading to a larger effective input capacitance.\n\nIn a cascode configuration, which typically consists of two transistors stacked on top of each other, the Miller effect is less pronounced for several reasons:\n\n1. **Reduced Voltage Gain**: In a cascode configuration, the voltage gain of the overall circuit is typically lower than that of a single transistor amplifier. The lower gain reduces the multiplication factor applied to the feedback capacitance, thereby decreasing the effective input capacitance.\n\n2. **Isolation of Input and Output**: The cascode arrangement provides better isolation between the input and output stages. The transistor at the bottom (input transistor) is shielded from the output voltage variations by the transistor above it (cascode transistor). This shielding reduces the feedback capacitance seen at the input, which in turn diminishes the Miller effect.\n\n3. **Improved Frequency Response**: The cascode configuration enhances the frequency response of the amplifier. By reducing the Miller capacitance, the bandwidth of the amplifier is improved, allowing it to operate effectively at higher frequencies without the detrimental effects of increased input capacitance.\n\n4. **Lower Effective Capacitance**: The cascode configuration can also lead to a lower effective capacitance at the input due to the way the transistors are biased and operate. This can further mitigate the impact of the Miller effect.\n\nIn summary, the cascode configuration reduces the Miller effect primarily due to its lower voltage gain, improved isolation between input and output, and enhanced frequency response, all of which contribute to a lower effective input capacitance.",
        "format": "markdown",
        "sha256": "a210451638ee7c38ad67ac7b13bf0b52e498be2ead6a1e3cdf49b2e8ab9984f8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It reaches the right broad conclusion and mentions isolation, but incorrectly attributes the effect to lower overall cascode gain. The key mechanism is that M1’s drain is a low-impedance node, so its swing and the gain across Cgd1 are limited.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 364,
        "total_tokens": 384,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 364,
        "total_tokens": 384,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect refers to the phenomenon where the input capacitance of an amplifier is increased due to the feedback capacitance between its input and output. This effect is particularly significant in common-emitter or common-source amplifier configurations, where the voltage gain is high, leading to a substantial increase in the effective input capacitance.\n\nIn a cascode configuration, which typically consists of two transistors stacked on top of each other (with the first transistor providing gain and the second transistor providing a high output impedance), the Miller effect is less pronounced for several reasons:\n\n1. **Reduced Voltage Gain**: In a cascode configuration, the voltage gain of the overall circuit is typically lower than that of a single transistor amplifier. The lower gain reduces the feedback effect that contributes to the Miller capacitance. Since the Miller capacitance is proportional to the gain, a lower gain results in a smaller Miller effect.\n\n2. **Isolation of Input and Output**: The cascode arrangement effectively isolates the input of the first transistor from the output of the second transistor. This isolation reduces the feedback capacitance seen at the input, as the output voltage swing of the second transistor does not directly affect the input voltage of the first transistor as much as it would in a single-stage amplifier.\n\n3. **High Output Impedance**: The cascode configuration provides a high output impedance, which means that the output voltage changes less for a given change in output current. This characteristic further diminishes the impact of the Miller effect, as the feedback capacitance is less effective in coupling the output changes back to the input.\n\n4. **Improved Frequency Response**: The cascode configuration is often used to improve the frequency response of amplifiers. By reducing the Miller effect, the bandwidth of the amplifier can be increased, allowing for better performance at higher frequencies.\n\nIn summary, the Miller effect is less pronounced in a cascode configuration due to the reduced voltage gain, improved isolation between input and output, high output impedance, and enhanced frequency response. These factors collectively minimize the feedback capacitance that contributes to the Miller effect, leading to a more stable and efficient amplifier design.",
        "format": "markdown",
        "sha256": "e55e19dc5259ae47218c075c87edd2c5dbc7b643966bbc61b162ad96df048d4c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The conclusion is right, and the answer gestures at input-output isolation, but it misses the key low-impedance intermediate node and the modest gain across M1’s Cgd. It instead incorrectly attributes the effect to lower overall cascode gain and high output impedance.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 425,
        "total_tokens": 445,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 425,
        "total_tokens": 445,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their functions. The circuit appears to be a basic MOSFET configuration, likely used for amplification or switching purposes. Here’s a step-by-step analysis:\n\n### Components:\n1. **MOSFETs (M1 and M2)**: These are the main active components in the circuit. They control the flow of current based on the gate voltage.\n2. **Voltage Sources (Vb1, Vb2, Vin, VDD)**: These provide the necessary biasing and input signals for the MOSFETs.\n3. **Output Voltage (Vout)**: This is the voltage taken from the drain of M1, which is influenced by the input voltage (Vin) and the operation of M2.\n\n### Operation:\n1. **Biasing**: \n   - **Vb1 and Vb2** are likely biasing voltages for the gates of M2 and M1, respectively. Proper biasing is crucial for the MOSFETs to operate in the desired region (cut-off, saturation, or triode).\n   \n2. **Input Signal (Vin)**:\n   - The input voltage (Vin) is applied to the gate of M2. Depending on its value, M2 will either allow or block current flow, affecting the output voltage (Vout).\n\n3. **Output Voltage (Vout)**:\n   - The output voltage is taken from the drain of M1. The state of M1 (on or off) will determine whether Vout is close to VDD (when M1 is on) or near ground (when M1 is off).\n\n### Analysis Steps:\n1. **Determine the Operating Region**:\n   - Check the gate-source voltages (Vgs) for both MOSFETs to determine if they are in the cutoff, saturation, or triode region.\n   - For M1: \\( V_{gs1} = V_{b2} - V_{out} \\)\n   - For M2: \\( V_{gs2} = V_{in} - V_{b1} \\)\n\n2. **Calculate Vout**:\n   - If M2 is on (Vin > Vb1), it will allow current to flow, affecting Vout based on the characteristics of M1.\n   - If M1 is on (Vb2 > Vout), Vout will be influenced by the load connected to it.\n\n3. **Load Considerations**:\n   - If there is a load connected to Vout, the output voltage will also depend on the load resistance and the current flowing through M1.\n\n### Conclusion:\nThe circuit's behavior will depend on the values of Vin, Vb1, and Vb2, as well as the characteristics of the MOSFETs (threshold voltages, transconductance, etc.). By analyzing these parameters, you can predict the output voltage and the overall functionality of the circuit. \n\nIf you have specific values for the voltages or characteristics of the MOSFETs, we can perform more detailed calculations.",
        "format": "markdown",
        "sha256": "923327b9adbb40318385118a7a8330d0df431d08b142efb090d0e065cf6c2937"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly places Vin at the gate of M2; it is applied at M2’s source. This misses the common-gate topology and contradicts the explicit zero-credit rule.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 632,
        "total_tokens": 26148,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 632,
        "total_tokens": 26148,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their functions. The circuit appears to be a basic MOSFET configuration, likely used for amplification or switching purposes. Here’s a step-by-step analysis:\n\n### Components:\n1. **MOSFETs (M1 and M2)**: These are the main active components in the circuit. They control the flow of current based on the gate voltage.\n2. **Voltage Sources (Vb1, Vb2, Vin, VDD)**: These provide the necessary biasing and input signals for the MOSFETs.\n3. **Output (Vout)**: This is where the output signal is taken from the circuit.\n\n### Operation:\n1. **Biasing**: \n   - **Vb1 and Vb2** are likely biasing voltages for the gates of M1 and M2, respectively. Proper biasing is crucial for the MOSFETs to operate in the desired region (cut-off, saturation, or triode).\n   \n2. **Input Signal (Vin)**:\n   - The input voltage (Vin) is applied to the gate of M2. Depending on the value of Vin and the biasing voltage Vb1, M2 will either turn on or off, allowing current to flow through it.\n\n3. **Output Signal (Vout)**:\n   - The output voltage (Vout) is taken from the drain of M2. If M2 is on, Vout will be influenced by Vin and the characteristics of M1.\n\n4. **M1's Role**:\n   - M1 is likely configured as a load or as part of a current mirror. Its operation will depend on Vb2 and the overall circuit configuration.\n\n### Analysis Steps:\n1. **Determine Operating Regions**:\n   - Analyze the gate-source voltages (Vgs) for both MOSFETs to determine if they are in the cut-off, saturation, or triode region.\n   \n2. **Calculate Vout**:\n   - Use the MOSFET equations to find Vout based on the input voltage and the biasing conditions. The equations will depend on whether the MOSFETs are in saturation or triode.\n\n3. **Small-Signal Analysis** (if applicable):\n   - If the circuit is used for amplification, perform a small-signal analysis around a bias point to find the gain.\n\n### Conclusion:\nThe circuit's behavior will depend heavily on the values of Vin, Vb1, Vb2, and VDD. By analyzing the MOSFETs' operating regions and calculating the output based on the input conditions, you can fully understand the circuit's functionality. If you have specific values for the voltages or additional context about the circuit's purpose, further detailed calculations can be performed.",
        "format": "markdown",
        "sha256": "ce33e959963c6c58d5d13ff6b8280a816c21146ce95886a971b27d2dc5f04391"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly places Vin at the gate of M2; it is applied at M2’s source, making this a common-gate stage. This misses the essential topology and gain behavior.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 573,
        "total_tokens": 26089,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 573,
        "total_tokens": 26089,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their functions. The circuit appears to be a basic MOSFET configuration, likely used for amplification or switching.\n\n### Components:\n1. **MOSFETs (M1 and M2)**: These are the main active components in the circuit. They control the flow of current based on the gate voltage.\n2. **Voltage Sources (Vb1, Vb2, Vin, VDD)**: These provide the necessary biasing and input signals for the MOSFETs.\n3. **Output Voltage (Vout)**: This is the voltage taken from the drain of M1, which is influenced by the input voltage (Vin) and the operation of M2.\n\n### Analysis Steps:\n\n1. **Biasing Conditions**:\n   - **Vb1 and Vb2**: These voltages are likely used to set the gate voltages of M1 and M2. Proper biasing is crucial for the MOSFETs to operate in the desired region (cut-off, saturation, or triode).\n   \n2. **Operation of M1**:\n   - M1 is connected to VDD and will conduct when its gate voltage (Vb2) exceeds its threshold voltage (Vth). The output voltage (Vout) will depend on the drain current flowing through M1, which is controlled by the gate voltage of M2.\n\n3. **Operation of M2**:\n   - M2 is connected to Vin. The gate voltage of M2 will determine whether it is in the on or off state. If Vin is above the threshold voltage of M2, it will allow current to flow, affecting the voltage at Vout.\n\n4. **Output Voltage (Vout)**:\n   - Vout will be influenced by both the input voltage (Vin) and the biasing voltages (Vb1 and Vb2). The relationship can be analyzed using the MOSFET equations, considering the saturation and triode regions.\n\n### Key Points:\n- **Transfer Characteristics**: The relationship between Vin and Vout can be plotted to understand the gain and linearity of the circuit.\n- **Load Conditions**: The load connected to Vout will also affect the performance of the circuit, particularly in terms of output impedance and voltage swing.\n- **Stability and Frequency Response**: Depending on the application, additional components (like capacitors or resistors) may be needed for stability and to control the frequency response.\n\n### Conclusion:\nThis circuit likely serves as a basic amplifier or switch, with the output voltage being a function of the input voltage and the biasing conditions of the MOSFETs. Further analysis would require specific values for the voltages and characteristics of the MOSFETs to derive precise equations for Vout in relation to Vin.",
        "format": "markdown",
        "sha256": "54bd97651610a959966dc77e030a9a102c2ad3d07bc820f5a16088e5f7cd465b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misses the common-gate topology and its key behavior, and treats Vin as if it controls M2’s gate. It gives no valid gain or input-resistance analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 576,
        "total_tokens": 26092,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 576,
        "total_tokens": 26092,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to analyze the components and their configurations.\n\n1. **Identify the Components**: The circuit includes two MOSFETs (M1 and M2), several capacitors (C_GS, C_GD, C_GD2, C_DB, C_DB2), and a resistor (R_S).\n\n2. **Poles in the Circuit**: Each capacitor introduces a pole in the transfer function. The number of poles can be estimated based on the number of reactive components (capacitors) that affect the output voltage \\( V_{out} \\).\n\n3. **Counting the Capacitors**:\n   - C_GS\n   - C_GD\n   - C_GD2\n   - C_DB\n   - C_DB2\n\n   This gives us a total of **five capacitors**.\n\n4. **Considering the MOSFETs**: Each MOSFET can also introduce additional dynamics, but primarily, the capacitors will dictate the number of poles.\n\n5. **Final Count**: Assuming each capacitor contributes one pole, the circuit has **five poles**.\n\nThus, the circuit shown has **five poles**.",
        "format": "markdown",
        "sha256": "e8c28ce109579930c5eafdc606db3394ac1fb85ef1dd4393a2cf9ac35ce987e3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly counts each capacitor as a separate pole. The circuit has only two independent capacitive nodes, so it has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25520,
        "output_tokens": 244,
        "total_tokens": 25764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25520,
        "output_tokens": 244,
        "total_tokens": 25764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to analyze the components and their configurations.\n\n1. **Identify the Components**: The circuit includes transistors (M1 and M2), capacitors (C_GS, C_GD, C_GD2, C_DB, C_DB2), and a resistor (R_S).\n\n2. **Poles in the Circuit**: Each capacitor introduces a pole in the transfer function. The number of poles can be estimated based on the number of reactive components (capacitors) that affect the output voltage \\( V_{out} \\).\n\n3. **Counting the Capacitors**:\n   - C_GS\n   - C_GD\n   - C_GD2\n   - C_DB\n   - C_DB2\n\n   This gives us a total of **five capacitors**.\n\n4. **Transistor Effects**: Each transistor can also introduce additional poles depending on their configurations and interactions with the capacitors. However, for a basic analysis, we can start with the capacitors.\n\n5. **Final Count**: Assuming each capacitor contributes one pole, the circuit has at least **five poles**.\n\nThus, the circuit shown has **five poles**.",
        "format": "markdown",
        "sha256": "f3ed20d7eb5eeba33bca049605a8a292b712d5cf21d5b509cb11a489e6a05d40"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The circuit has two poles, associated with the M1 gate and output nodes. Counting each capacitor as a separate pole incorrectly gives five.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25520,
        "output_tokens": 249,
        "total_tokens": 25769,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25520,
        "output_tokens": 249,
        "total_tokens": 25769,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to analyze the components and their configurations. \n\n1. **Identify the Components**: The circuit includes transistors (M1 and M2), capacitors (C_GS, C_GD, C_GD2, C_DB, C_DB2), and a resistor (R_S).\n\n2. **Poles from Capacitors**: Each capacitor in the circuit typically contributes to a pole in the transfer function. The poles are determined by the reactive components (capacitors) and their interactions with resistive components.\n\n3. **Counting the Poles**:\n   - Each capacitor connected to the output or input can introduce a pole.\n   - In this circuit, we have:\n     - C_GS\n     - C_GD\n     - C_GD2\n     - C_DB\n     - C_DB2\n\n4. **Total Count**: There are five capacitors in the circuit, which suggests that there are five potential poles.\n\n5. **Consideration of Transistors**: The transistors can also introduce additional dynamics, but primarily, the capacitors dictate the number of poles.\n\n### Conclusion\nThe circuit shown has **five poles** based on the number of capacitors present.",
        "format": "markdown",
        "sha256": "83c89794e6140dd9f76b812133e905c5d2d396fe02820e183f13e692e4e0e004"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly counts one pole per capacitor and concludes five poles. The circuit has two independent capacitive nodes, so it has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25520,
        "output_tokens": 256,
        "total_tokens": 25776,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25520,
        "output_tokens": 256,
        "total_tokens": 25776,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit appears to be a differential amplifier configuration using MOSFETs (M1 and M2). Here's a breakdown of its components and functionality:\n\n### Components:\n1. **M1 and M2**: These are the two MOSFETs that form the differential pair. They amplify the difference between the input voltages.\n2. **RD**: This is the drain resistor connected to the output node (Vout). It helps set the gain of the amplifier.\n3. **VDD**: This is the supply voltage for the circuit.\n4. **Vin**: This is the input voltage applied to the gates of the MOSFETs.\n\n### Operation:\n- **Differential Input**: The circuit takes a differential input voltage (Vin) and amplifies it. The gates of M1 and M2 are connected to Vin, which means the circuit can amplify small differences in voltage.\n- **Current Source**: The MOSFETs are typically biased with a current source to ensure they operate in the saturation region, which is necessary for linear amplification.\n- **Output Voltage (Vout)**: The output voltage is taken from the drain of M2. The voltage at this point will depend on the current flowing through RD and the characteristics of the MOSFETs.\n\n### Analysis:\n1. **Biasing**: Ensure that M1 and M2 are properly biased to operate in the saturation region. This is crucial for linear amplification.\n2. **Gain Calculation**: The voltage gain of the amplifier can be approximated as:\n   \\[\n   A_v = -g_m \\cdot R_D\n   \\]\n   where \\( g_m \\) is the transconductance of the MOSFETs.\n3. **Common Mode Rejection Ratio (CMRR)**: This circuit can reject common-mode signals, making it useful for applications where noise rejection is important.\n4. **Output Impedance**: The output impedance can be influenced by RD and the characteristics of M2.\n\n### Applications:\n- This type of circuit is commonly used in analog signal processing, instrumentation amplifiers, and operational amplifier designs.\n\n### Conclusion:\nThe circuit is a basic differential amplifier using MOSFETs, capable of amplifying small differences in input voltage while rejecting common-mode signals. Proper biasing and component selection are essential for optimal performance.",
        "format": "markdown",
        "sha256": "d50c096e788ca67aeea7f25645c327480c601a02dd3b71ac80a5cf2d68367ac0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the series NMOS devices as a differential pair and misses the key result: they act approximately as one transistor with a longer effective channel.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 475,
        "total_tokens": 25991,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 475,
        "total_tokens": 25991,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit appears to be a differential amplifier configuration using MOSFETs (M1 and M2). Here's a breakdown of its components and functionality:\n\n### Components:\n1. **M1 and M2**: These are the two MOSFETs that form the differential pair. They amplify the difference between the input voltages.\n2. **RD**: This is the drain resistor connected to the output node (Vout). It helps set the gain of the amplifier.\n3. **VDD**: This is the supply voltage for the circuit.\n4. **Vin**: This is the input voltage applied to the gates of the MOSFETs.\n\n### Operation:\n- **Differential Input**: The circuit takes a differential input voltage (Vin) and amplifies it. The gates of M1 and M2 are connected to Vin, which means the output will depend on the difference in gate voltages.\n- **Current Source**: The circuit typically requires a current source to bias the differential pair, which is not shown in this simplified diagram. This current source ensures that both MOSFETs operate in the saturation region for proper amplification.\n- **Output Voltage (Vout)**: The output voltage is taken from the drain of M2. The voltage at Vout will vary based on the input voltage and the characteristics of the MOSFETs.\n\n### Key Points:\n- **Gain**: The gain of the amplifier can be influenced by the value of RD and the transconductance of the MOSFETs.\n- **Common Mode Rejection Ratio (CMRR)**: This configuration is effective in rejecting common-mode signals, making it suitable for applications where noise reduction is critical.\n- **Biasing**: Proper biasing is essential for linear operation and to avoid distortion.\n\n### Applications:\n- This type of circuit is commonly used in analog signal processing, operational amplifiers, and sensor interfaces.\n\n### Conclusion:\nThe circuit is a basic differential amplifier using MOSFETs, designed to amplify the difference between two input signals while rejecting common-mode noise. Proper design considerations, including biasing and component selection, are crucial for optimal performance.",
        "format": "markdown",
        "sha256": "25acae58a93ecf199bfa5fbfb787dcfb4db4908fc03d963a81a3814cee40cf95"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the series, common-gate-driven NMOS structure as a differential pair and misses the key result: the lower triode-region device extends the effective channel length.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 434,
        "total_tokens": 25950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 434,
        "total_tokens": 25950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a basic differential amplifier configuration using MOSFETs (M1 and M2). Here's an analysis of its components and operation:\n\n### Components:\n1. **MOSFETs (M1 and M2)**: These are the active devices that amplify the input signal. They are typically enhancement-mode n-channel MOSFETs.\n2. **Resistor (RD)**: This resistor is connected to the drain of M2 and is used for load purposes. It helps in setting the output voltage.\n3. **Power Supply (VDD)**: This provides the necessary voltage for the circuit operation.\n4. **Input Voltage (Vin)**: This is the differential input voltage applied to the gates of M1 and M2.\n\n### Operation:\n1. **Differential Input**: The circuit is designed to amplify the difference between the voltages at the gates of M1 and M2. If \\( V_{in} \\) is applied to the gates, the circuit will respond to variations in this voltage.\n  \n2. **Current Source**: The MOSFETs are typically biased in the saturation region for proper amplification. The current flowing through M1 and M2 is determined by the gate-source voltage (Vgs) and the characteristics of the MOSFETs.\n\n3. **Output Voltage (Vout)**: The output voltage is taken from the drain of M2. The voltage at this point will depend on the current flowing through RD and the voltage drop across it. The relationship can be expressed as:\n   \\[\n   V_{out} = V_{DD} - I_D \\cdot R_D\n   \\]\n   where \\( I_D \\) is the drain current through M2.\n\n4. **Common-Mode Rejection**: The differential amplifier configuration provides good common-mode rejection, meaning it can effectively amplify the difference between the two input signals while rejecting any signals that are common to both inputs.\n\n### Key Points:\n- The circuit is sensitive to the input voltage difference, making it suitable for applications like signal conditioning.\n- The gain of the amplifier can be adjusted by changing the value of RD or by modifying the biasing conditions of the MOSFETs.\n- The output will swing between 0V (when M2 is fully on) and \\( V_{DD} \\) (when M2 is off), depending on the input conditions.\n\n### Conclusion:\nThis differential amplifier circuit is a fundamental building block in analog electronics, widely used in operational amplifiers and various signal processing applications. Understanding its operation is crucial for designing and analyzing more complex circuits.",
        "format": "markdown",
        "sha256": "109efc1fecf99eb524d22163823b57eb8263e2fe3813f399a3bab45fe7c4d551"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the series, common-gate-driven NMOS structure as a differential amplifier and misses the key result: the devices act approximately as one transistor with a longer effective channel.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 526,
        "total_tokens": 26042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 526,
        "total_tokens": 26042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their interactions. The circuit consists of two MOSFETs (M1 and M2), a resistor (RD), and various voltage sources (Vin, VDD, and Vb). Here’s a step-by-step analysis:\n\n### Components:\n1. **M1 and M2**: These are likely enhancement-mode MOSFETs. Their operation depends on the gate-source voltage (Vgs).\n2. **RD**: This resistor is connected to the drain of M2 and will affect the output voltage (Vout).\n3. **Vin**: This is the input voltage applied to the gate of M1.\n4. **VDD**: This is the supply voltage for the circuit.\n5. **Vb**: This voltage is connected to the source of M2 and can influence its operation.\n\n### Operation:\n1. **M1 Operation**:\n   - When Vin is greater than the threshold voltage (Vth) of M1, it turns on, allowing current to flow from the drain to the source.\n   - The current through M1 will depend on the Vgs of M1, which is determined by Vin.\n\n2. **M2 Operation**:\n   - M2 will turn on if Vb is greater than its threshold voltage (Vth).\n   - The output voltage (Vout) is taken from the drain of M2, which is influenced by the current flowing through RD.\n\n### Current Flow:\n- The current \\( I_1 \\) flows through M2 and RD. The relationship between the currents can be analyzed using Kirchhoff's laws.\n- The output voltage \\( Vout \\) can be expressed as:\n  \\[\n  Vout = VDD - I_1 \\cdot RD\n  \\]\n\n### Analysis Steps:\n1. **Determine the operating region** of M1 and M2 based on Vin and Vb.\n2. **Calculate the drain current** for M1 using the MOSFET equations, which typically involve parameters like transconductance and saturation current.\n3. **Use the current through M1** to find \\( I_1 \\) (assuming M2 is in saturation).\n4. **Substitute \\( I_1 \\)** into the equation for \\( Vout \\) to find the output voltage in terms of Vin and other parameters.\n\n### Conclusion:\nThe circuit functions as a basic MOSFET amplifier or switch, depending on the values of Vin and Vb. The output voltage \\( Vout \\) is influenced by the input voltage \\( Vin \\), the resistor \\( RD \\), and the characteristics of the MOSFETs. Further numerical analysis would require specific values for the MOSFET parameters and resistances.",
        "format": "markdown",
        "sha256": "eda90a19df891665a930ad9ae7b96ac49372f6c584dd1acbcf0354dd6ffcab11"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies Vb as connected to M2’s source rather than its gate, misses the shared source node and source-follower/common-gate operation, and incorrectly assumes all of I1 flows through M2.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 563,
        "total_tokens": 26079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 563,
        "total_tokens": 26079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their interactions. The circuit consists of two MOSFETs (M1 and M2), a resistor (RD), and various voltage sources (Vin, VDD, and Vb). Here’s a step-by-step analysis:\n\n### Components:\n1. **M1 and M2**: These are likely enhancement-mode MOSFETs. Their operation depends on the gate-source voltage (Vgs).\n2. **RD**: This resistor is connected to the drain of M1 and will affect the output voltage (Vout).\n3. **Vin**: This is the input voltage applied to the gate of M1.\n4. **VDD**: This is the supply voltage for the circuit.\n5. **Vb**: This voltage is connected to the gate of M2.\n\n### Operation:\n1. **M1 Operation**:\n   - M1 will turn on when \\( V_{in} \\) exceeds the threshold voltage (Vth) of the MOSFET.\n   - When M1 is on, it allows current to flow from VDD through RD to ground, affecting Vout.\n\n2. **M2 Operation**:\n   - M2 is controlled by Vb. If Vb is above its threshold voltage, M2 will also turn on, allowing current to flow through it.\n   - The current \\( I_1 \\) flowing through M2 will depend on the voltage across it and its characteristics.\n\n### Output Voltage (Vout):\n- Vout can be determined by the voltage drop across RD when M1 is conducting. The relationship can be expressed as:\n  \\[\n  V_{out} = V_{DD} - I_D \\cdot R_D\n  \\]\n  where \\( I_D \\) is the drain current through M1.\n\n### Current Analysis:\n- The current \\( I_1 \\) flowing through M2 will depend on the gate voltage \\( V_b \\) and the characteristics of M2.\n- If M2 is in saturation, the current can be expressed using the MOSFET equations.\n\n### Summary:\n- The circuit functions as a basic amplifier or switch, depending on the input voltages.\n- The output voltage (Vout) is influenced by the input voltage (Vin) and the resistor (RD).\n- The behavior of the circuit can be further analyzed using specific values for the MOSFET parameters and the resistances.\n\n### Additional Considerations:\n- Ensure to check the biasing conditions for both MOSFETs to ensure they operate in the desired region (cut-off, saturation, or triode).\n- The stability and frequency response of the circuit may also be analyzed if it is intended for AC signals.\n\nThis analysis provides a foundational understanding of how the circuit operates and the relationships between its components.",
        "format": "markdown",
        "sha256": "c55c6b24311651f6751a05a9d3dca8106c2689135bcc468b8f6fa3ac257ecbb6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the connections and current paths: RD is at M2’s drain, not M1’s, and the answer misses the source-coupled/source-follower-to-common-gate topology and its signal path.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 577,
        "total_tokens": 26093,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 577,
        "total_tokens": 26093,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their interactions. The circuit consists of two MOSFETs (M1 and M2), a resistor (RD), and various voltage sources (Vin, VDD, and Vb). Here’s a step-by-step analysis:\n\n### Components:\n1. **M1 and M2**: These are likely enhancement-mode MOSFETs. Their operation depends on the gate-source voltage (Vgs).\n2. **RD**: This resistor is connected to the drain of M2 and is used to set the output voltage (Vout).\n3. **Vin**: This is the input voltage applied to the gate of M1.\n4. **VDD**: This is the supply voltage for the circuit.\n5. **Vb**: This voltage is connected to the source of M2, which can influence its operation.\n\n### Operation:\n1. **M1 Operation**:\n   - M1 is controlled by Vin. When Vin exceeds the threshold voltage (Vth) of M1, it turns on, allowing current to flow from the drain to the source.\n   - The current through M1 will depend on the Vgs (Vin - Vsource of M1).\n\n2. **M2 Operation**:\n   - M2 is influenced by the output voltage (Vout) and the voltage Vb. The gate-source voltage (Vgs) for M2 is determined by Vout - Vb.\n   - If Vout is sufficiently high (greater than Vb + Vth of M2), M2 will turn on, allowing current to flow through RD.\n\n### Current Flow:\n- The current \\( I_1 \\) flows through M2 when it is on, and this current will also flow through RD, creating a voltage drop across it.\n- The output voltage \\( Vout \\) can be expressed as:\n  \\[\n  Vout = VDD - I_1 \\cdot RD\n  \\]\n- The relationship between \\( I_1 \\) and the gate voltages will determine the overall behavior of the circuit.\n\n### Key Points:\n- The circuit can function as an amplifier or a switch, depending on the values of Vin and Vb.\n- The output voltage \\( Vout \\) is influenced by the input voltage \\( Vin \\) and the resistor \\( RD \\).\n- The biasing of M2 through \\( Vb \\) can affect the linearity and gain of the circuit.\n\n### Conclusion:\nTo fully analyze the circuit, you would typically need to know the specific parameters of the MOSFETs (like threshold voltage, transconductance, etc.) and the values of the resistors and voltages involved. This analysis provides a foundational understanding of how the circuit operates under different conditions.",
        "format": "markdown",
        "sha256": "44fe4b13226c21d58533492ee28672ba60fd48e5d5bd5f284f856c6ea48c11aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies M2’s connection: Vb drives its gate, while its source is shared with M1. It also incorrectly assigns all of I1 to M2 and gives an unsupported output relation, missing the circuit’s source-follower/common-gate operation.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 570,
        "total_tokens": 26086,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 570,
        "total_tokens": 26086,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the circuit can be inductive due to the interaction between the transistors \\( M_1 \\) and \\( M_2 \\) and the parasitic capacitances present in the circuit. Here’s a breakdown of why this occurs:\n\n1. **Transistor Operation**: In the circuit, \\( M_1 \\) and \\( M_2 \\) are likely operating in a configuration that allows for feedback and gain. The output impedance is influenced by the transconductance of these transistors and their operating regions.\n\n2. **Parasitic Capacitances**: Each transistor has parasitic capacitances, such as gate-drain capacitance (\\( C_{gd} \\)) and gate-source capacitance (\\( C_{gs} \\)). These capacitances can create feedback paths that affect the output impedance.\n\n3. **Feedback Mechanism**: When the output voltage \\( V_{out} \\) changes, it can cause a change in the gate voltage of \\( M_1 \\) through \\( C_{gd} \\). This feedback can lead to a phase shift in the output current relative to the output voltage, which is a characteristic of inductive behavior.\n\n4. **Frequency Response**: At certain frequencies, the reactive components (inductance and capacitance) can dominate the impedance characteristics. If the circuit is analyzed in the frequency domain, the output impedance can exhibit inductive characteristics due to the phase relationship between voltage and current.\n\n5. **Inductive Behavior**: Specifically, if the output current lags the output voltage (which can happen due to the capacitive effects), the output impedance can be modeled as inductive. This is often seen in high-frequency applications where the effects of parasitic elements become significant.\n\nIn summary, the output impedance can be inductive due to the interplay of transistor operation, parasitic capacitances, and feedback mechanisms that create a phase shift between voltage and current at certain frequencies.",
        "format": "markdown",
        "sha256": "e23bfc11f00cea8d599781b968f23c48fd778291e9f294fed404b639524df1ef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It only gives a generic parasitic-capacitance explanation and incorrectly attributes the effect to output-to-gate Cgd feedback. It misses the source-follower Cgs mechanism, the low-to-high-frequency transition from about 1/gm1 to RS, and the condition RS > 1/gm1 for inductive behavior.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36859,
        "output_tokens": 393,
        "total_tokens": 37252,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36859,
        "output_tokens": 393,
        "total_tokens": 37252,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the circuit can be inductive due to the interaction between the transistors \\( M_1 \\) and \\( M_2 \\) and the parasitic capacitances present in the circuit. Here’s a breakdown of the reasons:\n\n1. **Transistor Operation**: In this circuit, \\( M_1 \\) and \\( M_2 \\) are likely operating in a configuration that allows for feedback and gain. The output impedance is influenced by the transconductance of these transistors and their operating regions.\n\n2. **Parasitic Capacitances**: Each transistor has parasitic capacitances, such as gate-drain capacitance (\\( C_{gd} \\)) and gate-source capacitance (\\( C_{gs} \\)). These capacitances can create a feedback loop that affects the output impedance.\n\n3. **Frequency Response**: At certain frequencies, the reactance of these capacitances can dominate the impedance seen at the output. If the circuit is designed such that the capacitive effects lead to a phase shift, the output impedance can appear inductive.\n\n4. **Feedback Mechanism**: If there is a feedback mechanism in place (for example, if \\( M_2 \\) is providing feedback to \\( M_1 \\)), this can also contribute to an inductive output impedance. The feedback can cause the output to respond in a way that mimics inductive behavior, especially at higher frequencies.\n\n5. **Load Conditions**: The load connected to the output can also influence the output impedance. If the load has inductive characteristics, it can interact with the circuit's output impedance, further enhancing the inductive nature.\n\nIn summary, the combination of transistor characteristics, parasitic capacitances, feedback mechanisms, and load conditions can lead to an output impedance that behaves inductively in certain frequency ranges.",
        "format": "markdown",
        "sha256": "026f431272f587461c9ee252280aa63a84d29b9058f047bef4467cd9637f6749"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer only gives a generic account involving parasitic capacitance and phase shift. It misses the key Rs–Cgs mechanism, the low- and high-frequency impedance limits, and the condition for inductive behavior; its suggested M2 feedback and load effects are unsupported.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36859,
        "output_tokens": 371,
        "total_tokens": 37230,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36859,
        "output_tokens": 371,
        "total_tokens": 37230,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the circuit can be inductive due to the interaction between the transistors \\( M_1 \\) and \\( M_2 \\) and the parasitic capacitances present in the circuit. Here’s a breakdown of why this occurs:\n\n1. **Transistor Operation**: The transistors \\( M_1 \\) and \\( M_2 \\) are likely operating in a configuration that allows for feedback and gain. The output impedance is influenced by the transconductance of these transistors and their respective output characteristics.\n\n2. **Parasitic Capacitances**: Each transistor has parasitic capacitances, such as gate-drain capacitance (\\( C_{gd} \\)) and gate-source capacitance (\\( C_{gs} \\)). These capacitances can create feedback paths that affect the output impedance.\n\n3. **Feedback Mechanism**: When the output voltage \\( V_{out} \\) changes, it can cause a change in the gate voltage of \\( M_2 \\) through the feedback network. This change can lead to a variation in the drain current of \\( M_2 \\), which can be interpreted as an inductive response.\n\n4. **Phase Shift**: The presence of capacitances can introduce a phase shift between the voltage and current at the output. If the current lags the voltage, the output impedance can appear inductive.\n\n5. **Frequency Dependence**: At higher frequencies, the effects of these capacitances become more pronounced, and the output impedance can transition from resistive to inductive as the frequency increases.\n\nIn summary, the inductive nature of the output impedance arises from the interplay of transistor characteristics, parasitic capacitances, and the feedback mechanisms within the circuit. This behavior is particularly relevant in high-frequency applications where these effects are more significant.",
        "format": "markdown",
        "sha256": "cd90eefad6a87b85b408332453d46d3357b4a62592cfc571f27ea21befe07ba5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It vaguely recognizes that capacitances can make output impedance frequency-dependent, but misses the key mechanism: M1’s gate-source capacitance connects the gate through RS, making Zout rise from about 1/gm1 toward RS when RS > 1/gm1. It also incorrectly attributes the effect to feedback through M2.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36859,
        "output_tokens": 367,
        "total_tokens": 37226,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36859,
        "output_tokens": 367,
        "total_tokens": 37226,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their functions. The circuit consists of two MOSFETs (M1 and M2), a resistor (RD1), and a current source (Iin). Here’s a step-by-step analysis:\n\n### Components:\n1. **M1 (MOSFET)**: This transistor is likely configured as a common-source amplifier. It amplifies the input signal.\n2. **M2 (MOSFET)**: This transistor may be used for biasing or as a current mirror, depending on its configuration and the circuit's purpose.\n3. **RD1 (Resistor)**: This resistor is connected to the drain of M1 and is used to set the output voltage (Vout) based on the current flowing through M1.\n4. **Iin (Current Source)**: This provides a constant current to the gate of M1, which controls its operation.\n\n### Analysis Steps:\n1. **Biasing**: Determine the biasing conditions for M1 and M2. The gate-source voltage (Vgs) of M1 must be sufficient to turn it on, which depends on the threshold voltage (Vth) of the MOSFET.\n  \n2. **Operation of M1**: \n   - When Iin flows into the gate of M1, it creates a Vgs that allows M1 to conduct.\n   - The output voltage (Vout) can be expressed as:\n     \\[\n     V_{out} = V_{DD} - I_D \\cdot R_{D1}\n     \\]\n   where \\(I_D\\) is the drain current of M1.\n\n3. **Current through M2**: If M2 is configured as a current mirror, it will replicate the current flowing through M1, which helps in stabilizing the operation of M1.\n\n4. **Output Voltage (Vout)**: The output voltage will depend on the values of RD1 and the current flowing through M1. If M1 is in saturation, the output can be approximated as:\n   \\[\n   V_{out} \\approx V_{DD} - k \\cdot (V_{gs} - V_{th})^2\n   \\]\n   where \\(k\\) is a constant related to the process parameters of the MOSFET.\n\n5. **Small-Signal Analysis**: If the circuit is used for amplification, small-signal parameters such as transconductance (gm) and output resistance (ro) can be calculated to determine the gain of the amplifier.\n\n### Conclusion:\nThe circuit appears to be a basic MOSFET amplifier configuration. The exact behavior will depend on the specific parameters of the MOSFETs and the values of the resistors. For precise calculations, you would need to know the threshold voltages, transconductance parameters, and the supply voltage (VDD).",
        "format": "markdown",
        "sha256": "8ae86742d984750db133e3c1f2237e368d01c22d22d16c38ed6e462483f262d2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes M1 as a common-source stage and notes that the input current is connected to its gate node, but it misses M2’s connection to Vout and the resulting positive-feedback loop, instead treating the circuit as a generic amplifier or possible current mirror.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 592,
        "total_tokens": 26108,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 592,
        "total_tokens": 26108,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their functions. The circuit consists of two MOSFETs (M1 and M2), a resistor (RD1), and a current source (Iin). Here’s a step-by-step analysis:\n\n### Components:\n1. **M1 (MOSFET)**: This transistor is likely configured as a common-source amplifier. It amplifies the input signal.\n2. **M2 (MOSFET)**: This transistor may be used for biasing or as a current mirror, depending on its configuration and the circuit's purpose.\n3. **RD1 (Resistor)**: This resistor is connected to the drain of M1 and is used to set the output voltage (Vout) based on the current flowing through M1.\n4. **Iin (Current Source)**: This provides a constant current to the gate of M1, which controls its operation.\n\n### Analysis Steps:\n1. **Biasing**: Determine the biasing conditions for M1 and M2. The gate-source voltage (Vgs) of M1 must be sufficient to turn it on, which depends on the threshold voltage (Vth) of the MOSFET.\n  \n2. **Operation of M1**: \n   - When Iin flows into the gate of M1, it creates a Vgs that allows M1 to conduct.\n   - The output voltage (Vout) can be expressed as:\n     \\[\n     V_{out} = V_{DD} - I_D \\cdot R_{D1}\n     \\]\n   where \\(I_D\\) is the drain current of M1.\n\n3. **Current through M2**: If M2 is configured as a current mirror, it will replicate the current flowing through M1, ensuring that the output current remains stable.\n\n4. **Output Voltage (Vout)**: The output voltage will depend on the values of RD1 and the current flowing through M1. If M1 is in saturation, the output can be approximated as:\n   \\[\n   V_{out} \\approx V_{DD} - k \\cdot (V_{gs} - V_{th})^2\n   \\]\n   where \\(k\\) is a constant related to the process parameters of the MOSFET.\n\n5. **Small-Signal Analysis**: If the circuit is used for amplification, small-signal parameters such as transconductance (gm) and output resistance (ro) can be calculated to determine the gain of the amplifier.\n\n### Conclusion:\nThe circuit appears to be a basic MOSFET amplifier configuration. The output voltage is influenced by the input current (Iin) and the resistor (RD1). The overall performance will depend on the specific characteristics of the MOSFETs used, including their threshold voltages and transconductance parameters. Further analysis may involve calculating the gain, input/output impedances, and frequency response if needed.",
        "format": "markdown",
        "sha256": "ac2e6b859bdd38cacdac38745a7556b1fd08686f5b0b755f7ffb4fc1d0e8c961"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Identifies M1 as a common-source stage and recognizes that the input current drives its gate node, but misses M2’s connection and the positive-feedback loop that dominates the circuit’s behavior.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 606,
        "total_tokens": 26122,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 606,
        "total_tokens": 26122,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their functions. The circuit appears to be a basic current mirror or amplifier configuration using MOSFETs (M1 and M2) and a resistor (RD1).\n\n### Components:\n1. **M1 and M2**: These are MOSFETs. M1 is likely configured as the main transistor that controls the output voltage (Vout), while M2 is used for biasing or mirroring the input current (Iin).\n2. **RD1**: This resistor is connected to the drain of M1 and is used to set the output voltage based on the current flowing through M1.\n3. **VDD**: This is the supply voltage for the circuit.\n4. **Iin**: This is the input current that is being mirrored or amplified.\n\n### Operation:\n1. **Input Current (Iin)**: The input current flows into the gate of M2, which controls its operation. The gate-source voltage (Vgs) of M2 will determine how much current it allows to flow through it.\n2. **Current Mirroring**: M2 is typically used to mirror the input current (Iin) to M1. If M1 and M2 are matched (same dimensions and characteristics), the current through M1 (Im1) will be approximately equal to Iin.\n3. **Output Voltage (Vout)**: The output voltage is taken from the drain of M1. The voltage across RD1 will depend on the current flowing through M1 and the value of RD1. The relationship can be expressed as:\n   \\[\n   V_{out} = V_{DD} - I_{m1} \\cdot R_{D1}\n   \\]\n   where \\(I_{m1}\\) is the current through M1.\n\n### Key Points:\n- The circuit operates in saturation if the MOSFETs are properly biased.\n- The output voltage (Vout) will vary based on the input current (Iin) and the resistance (RD1).\n- The circuit can be used for current amplification or as a current mirror, depending on the configuration and the values of the components.\n\n### Conclusion:\nThis circuit is a fundamental building block in analog electronics, often used in amplifiers and current mirrors. Understanding the operation of MOSFETs and their configurations is crucial for analyzing and designing such circuits.",
        "format": "markdown",
        "sha256": "6e09e79b7281da4cc5cdb12bcb6be0e48ed60ab0d6e02392c441015a8bdd3552"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the input as driving M2's gate and describes a current mirror, missing the positive-feedback loop and the actual input node.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 494,
        "total_tokens": 26010,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 494,
        "total_tokens": 26010,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their interactions. The circuit appears to be a differential amplifier or a similar configuration using MOSFETs (M1 and M2), resistors (RD1, RD2, RF), and a current source (Iin).\n\n### Components:\n1. **MOSFETs (M1 and M2)**: These transistors are likely used for amplification. M1 is connected to the input current (Iin), while M2 is connected to the output voltage (Vout).\n  \n2. **Resistors (RD1, RD2, RF)**: \n   - **RD1 and RD2** are likely used for biasing the MOSFETs and setting the operating point.\n   - **RF** is a feedback resistor that helps in determining the gain of the amplifier.\n\n3. **Current Source (Iin)**: This is the input current that will be amplified by the circuit.\n\n4. **Voltage Source (VDD)**: This provides the necessary supply voltage for the circuit.\n\n### Analysis Steps:\n1. **Biasing**: Determine the biasing conditions for M1 and M2. The gate-source voltage (Vgs) for each MOSFET will dictate whether they are in the saturation or triode region.\n\n2. **Input Current (Iin)**: The input current will flow through M1, and the output current through M2 will depend on the characteristics of the MOSFETs and the feedback resistor RF.\n\n3. **Output Voltage (Vout)**: The output voltage can be derived from the relationship between the input current, the feedback resistor, and the characteristics of the MOSFETs. \n\n4. **Feedback Mechanism**: The feedback through RF will stabilize the output and determine the gain of the amplifier. The gain can be expressed as:\n   \\[\n   V_{out} = -I_{in} \\cdot RF\n   \\]\n   This assumes that the circuit is configured as an inverting amplifier.\n\n5. **Small-Signal Analysis**: If needed, perform a small-signal analysis to determine the frequency response and stability of the circuit.\n\n### Conclusion:\nThe circuit functions as a differential amplifier or similar configuration, where the input current is amplified and the output voltage is determined by the feedback resistor and the characteristics of the MOSFETs. Further calculations would require specific values for the resistors and the characteristics of the MOSFETs used.",
        "format": "markdown",
        "sha256": "824a5e715d867797c7751a810756b1bfdbc2bdfa78f3d23032d63c6d260cc1b4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes RF feedback and gives the expected approximate transimpedance, but misses the essential topology: M1 is the common-gate input device and M2 is the common-source stage driven by X. Calling the circuit a differential amplifier is incorrect.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 506,
        "total_tokens": 26022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 506,
        "total_tokens": 26022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their interactions. The circuit appears to be a differential amplifier or a similar configuration using MOSFETs (M1 and M2), resistors (RD1, RD2, RF), and a current source (Iin).\n\n### Components:\n1. **MOSFETs (M1 and M2)**: These transistors are likely used for amplification. M1 is connected to the input current (Iin), while M2 is connected to the output voltage (Vout).\n  \n2. **Resistors (RD1, RD2, RF)**: \n   - **RD1 and RD2**: These resistors are likely used for biasing the MOSFETs and setting the operating point.\n   - **RF**: This resistor is connected to the output and may be used for feedback.\n\n3. **Current Source (Iin)**: This is the input current that will be amplified by the circuit.\n\n4. **Voltage Source (VDD)**: This provides the necessary supply voltage for the circuit.\n\n### Analysis Steps:\n1. **Biasing**: Determine the biasing conditions for M1 and M2. The gate-source voltage (Vgs) for each MOSFET will dictate whether they are in the saturation or triode region.\n\n2. **Input Current (Iin)**: The input current will flow through M1, and the output voltage (Vout) will depend on the current flowing through M2 and the feedback resistor RF.\n\n3. **Output Voltage (Vout)**: The output voltage can be expressed in terms of the input current and the resistances in the circuit. The relationship can be derived using Kirchhoff's laws and the characteristics of the MOSFETs.\n\n4. **Feedback Mechanism**: The feedback through RF will affect the gain of the amplifier. The gain can be calculated based on the transconductance of the MOSFETs and the values of the resistors.\n\n### Key Equations:\n- **Ohm's Law**: \\( V = IR \\)\n- **MOSFET Characteristics**: The drain current \\( I_D \\) can be expressed as a function of \\( V_{gs} \\) and the parameters of the MOSFET.\n- **Output Voltage**: \\( V_{out} = V_{DD} - I_{RF} \\cdot R_F \\)\n\n### Conclusion:\nTo fully analyze the circuit, you would need to derive the equations based on the specific characteristics of the MOSFETs used (threshold voltage, transconductance, etc.) and the values of the resistors. The output voltage will be a function of the input current and the feedback resistor, influenced by the operating conditions of the MOSFETs.",
        "format": "markdown",
        "sha256": "3d6d0963b106639d9fc761e3115f21d37ab0e91469cd00e7e7daae5c7ee78828"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer does not identify the common-gate input stage, the common-source stage driven by X, or the current-to-voltage feedback operation. It only vaguely notes that RF may provide feedback, mislabels the topology as differential, and gives an unsupported output-voltage equation.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 569,
        "total_tokens": 26085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 569,
        "total_tokens": 26085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their interactions. The circuit appears to be a differential amplifier or a similar configuration using MOSFETs (M1 and M2), resistors (RD1, RD2, RF), and a current source (Iin).\n\n### Components:\n1. **MOSFETs (M1 and M2)**: These transistors are likely used for amplification. M1 is connected to the input current (Iin), while M2 is connected to the output voltage (Vout).\n  \n2. **Resistors (RD1, RD2, RF)**: \n   - **RD1 and RD2** are likely used for biasing the MOSFETs and setting the operating point.\n   - **RF** is a feedback resistor that helps in determining the gain of the amplifier.\n\n3. **Current Source (Iin)**: This is the input current that will be amplified by the circuit.\n\n4. **Voltage Source (VDD)**: This provides the necessary supply voltage for the circuit.\n\n### Analysis Steps:\n1. **Biasing**: Determine the biasing conditions for M1 and M2. The gate-source voltage (Vgs) for each MOSFET will dictate whether they are in the saturation or triode region.\n\n2. **Input Current (Iin)**: The input current will flow through M1, and the output current through M2 will be influenced by the feedback through RF.\n\n3. **Output Voltage (Vout)**: The output voltage can be expressed in terms of the input current and the resistances in the circuit. The relationship can be derived using Kirchhoff's laws and the characteristics of the MOSFETs.\n\n4. **Feedback Mechanism**: The feedback through RF will affect the gain of the amplifier. The gain can be calculated based on the transconductance of the MOSFETs and the values of the resistors.\n\n### Key Equations:\n- **Ohm's Law**: \\( V = IR \\)\n- **MOSFET Characteristics**: The drain current \\( I_D \\) can be expressed as:\n  \\[\n  I_D = k \\left( (V_{gs} - V_{th})^2 \\right)\n  \\]\n  where \\( k \\) is a constant related to the MOSFET and \\( V_{th} \\) is the threshold voltage.\n\n- **Output Voltage**: The output voltage can be approximated as:\n  \\[\n  V_{out} = V_{DD} - I_{RF} \\cdot R_F\n  \\]\n\n### Conclusion:\nTo fully analyze the circuit, you would need to know the specific parameters of the MOSFETs (like \\( k \\) and \\( V_{th} \\)), the values of the resistors, and the input current. With this information, you can derive the exact expressions for the output voltage and gain of the circuit.",
        "format": "markdown",
        "sha256": "7613ca24e7a057635145f3d01b3ba0f1c62266c531b7b395bf43141fc3732c4f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer only identifies generic MOSFET amplification and a feedback resistor; it does not identify the common-gate input stage, the common-source stage driven by X, or RF's connection from the output to the input node. It also gives no valid transimpedance or feedback-sign analysis, and its output-voltage relation is unsupported.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 605,
        "total_tokens": 26121,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 605,
        "total_tokens": 26121,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their functions. The circuit appears to be a differential amplifier configuration using MOSFETs (M1 and M2) and a current source (I1). Here’s a step-by-step analysis:\n\n### Components:\n1. **MOSFETs (M1 and M2)**: These are likely enhancement-mode MOSFETs used for amplification.\n2. **Current Source (I1)**: This provides a constant current to the circuit, which is essential for setting the operating point of the MOSFETs.\n3. **Input Current (Iin)**: This is the differential input current that will affect the output voltage (Vout).\n4. **Bias Voltage (Vb)**: This voltage is used to set the gate voltage of M1, influencing its operation.\n\n### Operation:\n1. **Differential Input**: The circuit takes a differential input through the two branches connected to the gates of M1 and M2. The input current (Iin) will create a voltage difference across the gates of M1 and M2, affecting their conduction.\n  \n2. **Current Mirror Configuration**: M2 can be seen as part of a current mirror configuration, where it mirrors the current flowing through M1. The output voltage (Vout) will depend on the difference in gate voltages of M1 and M2, which is influenced by Iin.\n\n3. **Output Voltage (Vout)**: The output voltage is taken from the drain of M2. The relationship between Vout and Iin can be derived from the transconductance of the MOSFETs and the load conditions.\n\n### Key Relationships:\n- The output voltage (Vout) can be expressed in terms of the input current (Iin) and the transconductance (gm) of the MOSFETs.\n- The circuit is likely designed to amplify the differential input signal, with Vout being proportional to the difference in gate voltages of M1 and M2.\n\n### Considerations:\n- **Biasing**: Proper biasing of M1 and M2 is crucial for linear operation. The value of Vb should be chosen to ensure that both MOSFETs operate in the saturation region.\n- **Load Conditions**: The load connected to Vout will affect the overall gain and output impedance of the circuit.\n- **Temperature Effects**: The characteristics of MOSFETs can vary with temperature, which may affect the performance of the circuit.\n\n### Conclusion:\nThis circuit functions as a differential amplifier, utilizing MOSFETs to amplify the difference between two input signals. The output voltage is influenced by the input current and the biasing conditions of the MOSFETs. Further analysis would require specific values for the components and the operating conditions to derive precise equations for Vout in terms of Iin.",
        "format": "markdown",
        "sha256": "82553a3218ddceeabaf099211c90de5f03c4c334696ebb25c251336f82de70ce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a differential amplifier/current mirror and gives the wrong signal connections. It misses the common-gate NMOS input stage, PMOS feedback path, and the resulting low input resistance/current-buffer behavior.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 584,
        "total_tokens": 26100,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 584,
        "total_tokens": 26100,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their functions. The circuit appears to be a differential amplifier configuration using MOSFETs (M1 and M2) and a current source (I1). Here’s a step-by-step analysis:\n\n### Components:\n1. **MOSFETs (M1 and M2)**: These are likely enhancement-mode MOSFETs used for amplification.\n2. **Current Source (I1)**: This provides a constant current to the circuit, which is essential for setting the operating point of the MOSFETs.\n3. **Input Current (Iin)**: This is the differential input current that will affect the output voltage (Vout).\n4. **Bias Voltage (Vb)**: This is used to set the gate voltage of M1, influencing its operation.\n\n### Operation:\n1. **Differential Input**: The circuit takes a differential input through the current source (Iin). The input current can be split between M1 and M2, depending on the input conditions.\n  \n2. **Current Mirroring**: M2 is likely configured to mirror the current flowing through M1. The output voltage (Vout) will depend on the difference in gate-source voltages (Vgs) of M1 and M2.\n\n3. **Output Voltage (Vout)**: The output voltage is taken from the drain of M2. It will vary based on the input current (Iin) and the biasing conditions set by Vb.\n\n### Key Relationships:\n- The output voltage (Vout) can be expressed in terms of the input current (Iin) and the transconductance (gm) of the MOSFETs.\n- The relationship can be approximated as:\n  \\[\n  V_{out} = V_{DD} - I_{out} \\cdot R_{load}\n  \\]\n  where \\( I_{out} \\) is the current through M2 and \\( R_{load} \\) is the load resistance connected to Vout.\n\n### Small-Signal Analysis:\nFor small-signal analysis, you can derive the small-signal parameters such as:\n- Transconductance (\\( g_m \\))\n- Output resistance (\\( r_o \\))\n\n### Conclusion:\nThe circuit functions as a differential amplifier, where the output voltage is influenced by the differential input current and the biasing conditions. The MOSFETs operate in saturation for proper amplification, and the output can be adjusted by varying the input current or the bias voltage. \n\nFor a more detailed analysis, specific values for the MOSFET parameters and the load resistance would be needed.",
        "format": "markdown",
        "sha256": "4d7e5236b78cd14ba69118416a54b1dbfe44477a4c696f71cdff22ba7a16267a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the circuit as a differential amplifier/current mirror and misses the common-gate NMOS input stage, PMOS feedback path, and resulting low input resistance and transimpedance behavior.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 541,
        "total_tokens": 26057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25516,
        "output_tokens": 541,
        "total_tokens": 26057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the given circuit, we can break it down into its components and their functions. The circuit appears to be a differential amplifier or a current mirror configuration, commonly used in analog circuits.\n\n### Components:\n1. **Transistors (M1, M2)**: These are likely MOSFETs or BJTs, depending on the context. They are used for amplification and switching.\n2. **Current Sources (I1, Iin)**: These provide biasing and input current to the circuit.\n3. **Voltage Sources (VDD, Vb)**: These supply the necessary voltage levels for operation.\n\n### Analysis Steps:\n\n1. **Biasing**:\n   - The current source \\( I_1 \\) sets a reference current for the circuit. This is crucial for establishing the operating point of the transistors.\n   - The input current \\( I_{in} \\) is fed into the gate/base of the transistor \\( M_2 \\), which will influence the output voltage \\( V_{out} \\).\n\n2. **Operation of M1 and M2**:\n   - **M2**: Acts as a load for the differential pair. It converts the input current \\( I_{in} \\) into a voltage drop across it, which is reflected at the output.\n   - **M1**: This transistor is likely configured to provide feedback or to set the output voltage \\( V_{out} \\) based on the input current.\n\n3. **Output Voltage \\( V_{out} \\)**:\n   - The output voltage can be derived from the relationship between the input current and the characteristics of the transistors. If \\( M_1 \\) and \\( M_2 \\) are matched, the output voltage will be proportional to the input current.\n\n4. **Voltage Levels**:\n   - \\( V_{b} \\) is likely a bias voltage that helps in setting the operating point of \\( M_1 \\). The exact value would depend on the desired performance of the circuit.\n\n5. **Small-Signal Analysis**:\n   - If analyzing for small-signal parameters, you would linearize the circuit around the operating point and derive parameters like transconductance, output resistance, and gain.\n\n### Conclusion:\nThis circuit is likely designed for amplification purposes, with \\( M_1 \\) and \\( M_2 \\) working together to convert the input current into a proportional output voltage. The exact behavior would depend on the transistor characteristics and the values of the bias currents and voltages. Further analysis could involve calculating gain, input/output impedance, and frequency response if needed.",
        "format": "markdown",
        "sha256": "61a1f8d708f4cbe64d1c26bbe93460071b977087cdccf460a63c2532fd925757"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the circuit as a differential amplifier/current mirror and places the input current at M2’s gate. It misses the common-gate NMOS input path, PMOS feedback loop, and the low-input-resistance/current-buffer behavior.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 526,
        "total_tokens": 26042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25516,
        "output_tokens": 526,
        "total_tokens": 26042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, if the three capacitors \\( C_L \\) in the circuit become arbitrarily large, the circuit will fail to oscillate. \n\nIn oscillatory circuits, the oscillation frequency is inversely related to the capacitance. As the capacitance increases, the time constant of the circuit also increases, which can lead to a situation where the circuit takes an excessively long time to charge and discharge. This can dampen or completely suppress oscillations.\n\nAdditionally, if the capacitors are too large, the circuit may not be able to reach the necessary conditions for oscillation, such as the required gain and phase shift, leading to a failure in sustaining oscillations.",
        "format": "markdown",
        "sha256": "86226e7bf7caa16cc0fa76730084fda7c1fe8cf1f12b3100005e33052d3b48ac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The central conclusion is wrong: the ring continues oscillating at a lower frequency as all three capacitances increase. The answer notes that increased capacitance lowers frequency, but incorrectly claims this eventually prevents oscillation.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48196,
        "output_tokens": 134,
        "total_tokens": 48330,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48196,
        "output_tokens": 134,
        "total_tokens": 48330,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, if the three capacitors \\( C_L \\) in the circuit become arbitrarily large, the circuit will fail to oscillate. \n\nIn oscillatory circuits, the oscillation frequency is inversely related to the capacitance. As the capacitance increases, the time constant of the circuit also increases, which can lead to a situation where the feedback loop cannot sustain oscillations. Essentially, the larger the capacitors, the slower the circuit responds to changes, which can dampen or completely suppress oscillations. \n\nIn summary, very large capacitors can prevent the circuit from oscillating effectively.",
        "format": "markdown",
        "sha256": "a28f2afd6f19e913863aa21b23f7d4e68206c58b8680223e817c379b6a5fa64c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer recognizes that larger capacitance slows the circuit, but incorrectly concludes that the ring stops oscillating; it continues oscillating at a lower frequency.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48196,
        "output_tokens": 120,
        "total_tokens": 48316,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48196,
        "output_tokens": 120,
        "total_tokens": 48316,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, if the three capacitors \\( C_L \\) in the circuit become arbitrarily large, the circuit will fail to oscillate. \n\nIn oscillatory circuits, the timing of the oscillation is determined by the capacitance and the resistance in the circuit. As the capacitance increases, the time constant of the circuit also increases, which can lead to a situation where the feedback loop is too slow to sustain oscillations. \n\nIn essence, if the capacitors are too large, the circuit may not be able to charge and discharge quickly enough to maintain the oscillation, effectively damping the oscillatory behavior and leading to a steady state instead.",
        "format": "markdown",
        "sha256": "f9af4c02d1d5b2e966a1a88fa6b6ac46905cfe4da4c707fd0e22ec8aa3970b0b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that larger capacitance increases the time constant, but incorrectly concludes that this stops oscillation. With identical capacitors at all three nodes, the ring continues oscillating at a lower frequency.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48196,
        "output_tokens": 130,
        "total_tokens": 48326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48196,
        "output_tokens": 130,
        "total_tokens": 48326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the values of the capacitors \\( C_L \\) in the given circuit will affect the phase noise characteristics of the system. Here's how:\n\n1. **Increased Capacitance**: By doubling the capacitance, the overall load capacitance seen by the oscillators or amplifiers in the circuit increases. This can lead to a lower resonant frequency if the circuit is resonant.\n\n2. **Phase Noise Reduction**: Generally, increasing the load capacitance can help reduce phase noise. This is because larger capacitors can filter out high-frequency noise more effectively, leading to a more stable output frequency.\n\n3. **Impact on Bandwidth**: However, increasing capacitance can also reduce the bandwidth of the circuit. A narrower bandwidth can lead to a more selective response, which might help in reducing phase noise but could also affect the circuit's ability to respond to fast changes.\n\n4. **Stability Considerations**: The stability of the oscillators may improve with increased capacitance, but it can also introduce additional phase shifts, which might affect the overall stability of the feedback loop.\n\nIn summary, doubling the capacitors \\( C_L \\) is likely to reduce phase noise due to better filtering of high-frequency noise, but it may also affect the bandwidth and stability of the circuit. The exact impact would depend on the specific characteristics of the circuit and its components.",
        "format": "markdown",
        "sha256": "7abc998aca48e6e6668bafe669db787c11c6bc3c0390cacb112d6f8b789974b6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It predicts a phase-noise reduction, but gives no magnitude and attributes it to generic filtering rather than the key scaling: halving the oscillation frequency lowers phase noise by about 6 dB at a fixed offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48193,
        "output_tokens": 277,
        "total_tokens": 48470,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48193,
        "output_tokens": 277,
        "total_tokens": 48470,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the values of the capacitors \\( C_L \\) in the given circuit will affect the phase noise characteristics of the system. Here's how:\n\n1. **Increased Capacitance**: By doubling the capacitance, the overall load capacitance seen by the oscillators or amplifiers in the circuit increases. This can lead to a lower cutoff frequency for the circuit's response.\n\n2. **Phase Margin**: The increased capacitance can improve the phase margin of the circuit, potentially leading to better stability. A more stable circuit typically exhibits reduced phase noise.\n\n3. **Noise Bandwidth**: The increased capacitance can also widen the noise bandwidth, which may lead to a reduction in phase noise at certain frequencies, particularly at lower frequencies.\n\n4. **Impact on Oscillator Performance**: If the circuit is part of an oscillator, the increased load capacitance can lower the oscillation frequency and may also affect the oscillator's phase noise performance. Generally, oscillators with larger load capacitance tend to have lower phase noise.\n\nIn summary, doubling the capacitors \\( C_L \\) is likely to reduce phase noise due to improved stability and altered frequency response characteristics. However, the exact impact would depend on the specific circuit configuration and parameters.",
        "format": "markdown",
        "sha256": "b2695a3501158cfebcc8b485ff04fb3260f399bca79bd142b971f7b25ecac94b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It predicts lower phase noise and notes that the oscillation frequency may fall, but omits the key result: about a fourfold (6 dB) reduction at a fixed offset. Its phase-margin and noise-bandwidth explanations are not the dominant mechanism.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 42624,
        "input_tokens": 48193,
        "output_tokens": 251,
        "total_tokens": 48444,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 42624,
        "input_tokens": 48193,
        "output_tokens": 251,
        "total_tokens": 48444,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the values of the capacitors \\( C_L \\) in the given circuit will affect the phase noise characteristics of the system. Here's how:\n\n1. **Increased Capacitance**: Doubling the capacitance increases the load capacitance seen by each stage of the circuit. This can lead to a lower cutoff frequency for the circuit, which may improve stability and reduce the susceptibility to high-frequency noise.\n\n2. **Phase Margin**: The increased capacitance can improve the phase margin of the circuit, potentially leading to better overall stability. A higher phase margin typically results in reduced phase noise.\n\n3. **Noise Bandwidth**: The noise bandwidth of the circuit may also change. With larger capacitors, the bandwidth can decrease, which can help in filtering out high-frequency noise components.\n\n4. **Overall Phase Noise**: Generally, increasing the load capacitance can lead to a reduction in phase noise, especially in oscillators and amplifiers, as it helps to stabilize the output frequency and reduce fluctuations.\n\nIn summary, doubling the capacitors \\( C_L \\) is likely to reduce the phase noise in the circuit, improving its performance in terms of stability and noise characteristics.",
        "format": "markdown",
        "sha256": "2b7b33466c6433569b1d7270e3817f6ddb9e3534616daf1937e22be9c0a84cf4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly predicts that phase noise decreases, but omits the key roughly fourfold (6 dB) reduction at a fixed offset. The cutoff-frequency, phase-margin, and bandwidth explanation does not capture the oscillator’s dominant frequency-scaling mechanism.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48193,
        "output_tokens": 238,
        "total_tokens": 48431,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48193,
        "output_tokens": 238,
        "total_tokens": 48431,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, if \\( C_L \\) becomes arbitrarily large, the circuit is likely to fail to oscillate. \n\nIn a typical oscillator circuit, the oscillation frequency is influenced by the capacitance and the feedback mechanism. An excessively large load capacitance \\( C_L \\) can lead to a significant increase in the time constant of the circuit, which may dampen the oscillations or prevent them altogether. This is because the circuit may not be able to charge and discharge the capacitor quickly enough to sustain oscillations, leading to a stable state rather than an oscillatory one. \n\nIn summary, a very large \\( C_L \\) can hinder the circuit's ability to oscillate effectively.",
        "format": "markdown",
        "sha256": "62541145c2b811ac856c3515278e34ffa8564e50c602ed3a8f82442ab5cfbc76"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The conclusion is correct, and the increased time constant is a broadly consistent explanation for why oscillation can stop. The answer is generic, however, and does not connect the one-node loading to a dominant pole or loss of loop gain/phase conditions.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48193,
        "output_tokens": 139,
        "total_tokens": 48332,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 48193,
        "output_tokens": 139,
        "total_tokens": 48332,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, if \\( C_L \\) becomes arbitrarily large, the circuit is likely to fail to oscillate. \n\nIn a typical oscillator circuit, the oscillation frequency is influenced by the capacitance and the feedback mechanism. As \\( C_L \\) increases, the time constant of the circuit also increases, which can lead to slower charging and discharging cycles. This can dampen the oscillations or even prevent them altogether, as the circuit may not be able to reach the necessary conditions for sustained oscillation.\n\nIn essence, a very large load capacitance can dominate the circuit's behavior, leading to a situation where the feedback is insufficient to maintain oscillation.",
        "format": "markdown",
        "sha256": "59a1c0720c0b5e51364991f5c047ea77edd3bf808b61b964326df4d6ebef4ef0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that arbitrarily large load capacitance can stop oscillation and links it to a larger time constant and insufficient feedback. The explanation is generic, though, and does not clearly identify the one-node dominant pole or resulting loop gain/phase roll-off.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 42624,
        "input_tokens": 48193,
        "output_tokens": 133,
        "total_tokens": 48326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 42624,
        "input_tokens": 48193,
        "output_tokens": 133,
        "total_tokens": 48326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, if \\( C_L \\) becomes arbitrarily large, the circuit is likely to fail to oscillate. \n\nIn a typical oscillator circuit, the oscillation frequency is influenced by the capacitance and the feedback mechanism. An excessively large load capacitance \\( C_L \\) can lead to a significant increase in the time constant of the circuit, which may dampen the oscillations or even prevent them from starting altogether. This is because the circuit may not be able to charge and discharge \\( C_L \\) quickly enough to sustain oscillations, resulting in a stable DC output instead of an oscillating signal. \n\nIn summary, a very large \\( C_L \\) can hinder the circuit's ability to oscillate effectively.",
        "format": "markdown",
        "sha256": "f80b86fa558d610d99b387d810ee0d0fc09edbd7069c4d4fe043b0afb3c6cc11"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large CL can stop oscillation and gives an acceptable time-domain explanation: the increased time constant can leave the circuit settling at DC. The lack of explicit pole or Barkhausen terminology is not essential.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 42624,
        "input_tokens": 48193,
        "output_tokens": 146,
        "total_tokens": 48339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 42624,
        "input_tokens": 48193,
        "output_tokens": 146,
        "total_tokens": 48339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths of the NMOS and PMOS devices in the circuit will generally lead to a few key effects on phase noise:\n\n1. **Increased Drive Current**: Wider transistors can drive more current, which can improve the overall speed and performance of the circuit. This can help reduce the time constants associated with switching, potentially leading to lower phase noise.\n\n2. **Reduced Channel Resistance**: Wider devices have lower channel resistance, which can improve the signal integrity and reduce noise contributions from the transistors themselves.\n\n3. **Increased Capacitance**: However, increasing the width also increases the gate capacitance, which can introduce additional noise sources and affect the frequency response of the circuit.\n\n4. **Impact on Phase Noise**: The overall effect on phase noise will depend on the balance between these factors. In many cases, the reduction in noise due to improved drive current and lower resistance can outweigh the increase in capacitance, leading to a net reduction in phase noise.\n\nIn summary, while the specific impact on phase noise will depend on the circuit configuration and operating conditions, doubling the widths of the NMOS and PMOS devices is likely to reduce phase noise overall, assuming other parameters remain constant.",
        "format": "markdown",
        "sha256": "571aeb3f870ec34bd908ad7098bed4d1d0c2712e2b359b40b599d9b866f3aca2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It predicts a phase-noise reduction, but gives no magnitude; the golden solution requires about 3 dB for full credit. Its explanation also does not capture the key scaling of signal and noise.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36866,
        "output_tokens": 244,
        "total_tokens": 37110,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36866,
        "output_tokens": 244,
        "total_tokens": 37110,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths of the NMOS and PMOS devices in the circuit will generally lead to a few key effects on phase noise:\n\n1. **Increased Drive Current**: Wider transistors can drive more current, which can improve the overall speed and performance of the circuit. This can help reduce the time constants associated with switching, potentially leading to lower phase noise.\n\n2. **Reduced Channel Resistance**: Wider devices have lower channel resistance, which can improve the signal integrity and reduce noise contributions from the transistors themselves.\n\n3. **Increased Capacitance**: However, increasing the width also increases the gate capacitance, which can introduce additional noise sources and affect the frequency response of the circuit.\n\n4. **Impact on Phase Noise**: The overall effect on phase noise will depend on the balance between these factors. In many cases, the reduction in noise due to improved drive current and lower resistance can outweigh the increase in capacitance, leading to a net reduction in phase noise.\n\nIn summary, while the exact impact on phase noise will depend on the specific circuit configuration and operating conditions, doubling the widths of the NMOS and PMOS devices is likely to reduce phase noise overall, primarily due to improved drive capabilities and reduced channel resistance.",
        "format": "markdown",
        "sha256": "7cea506ac2af08c96cfc09b705b4852f5fd0d4f359a39aa1ef479827dd152c27"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It predicts the correct direction, but gives no 3 dB magnitude and attributes the improvement to reduced resistance/noise rather than the scaling of signal and noise; the device noise current actually increases with width.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36866,
        "output_tokens": 250,
        "total_tokens": 37116,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36866,
        "output_tokens": 250,
        "total_tokens": 37116,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths of the NMOS and PMOS devices in the circuit will generally lead to a few key effects on phase noise:\n\n1. **Increased Drive Current**: Wider transistors can drive more current, which can improve the overall speed and performance of the circuit. This can help reduce the time constants associated with switching, potentially leading to lower phase noise.\n\n2. **Reduced Channel Resistance**: Wider devices have lower channel resistance, which can improve the signal integrity and reduce noise contributions from thermal and flicker noise.\n\n3. **Improved Gain**: The increased transconductance (due to larger widths) can enhance the gain of the circuit, which may also contribute to better noise performance.\n\n4. **Impact on Stability**: While increased width can improve performance, it may also affect the stability of the circuit. If the circuit becomes too fast, it might introduce other forms of noise or instability.\n\nOverall, doubling the widths of the NMOS and PMOS devices is likely to reduce phase noise, but the exact impact will depend on the specific circuit configuration and operating conditions.",
        "format": "markdown",
        "sha256": "ab16062672335d0481df16ced5deb96199ef30a3ba5f9c809a704e6a1063969f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It predicts the correct direction, but omits the key approximately 3 dB reduction and gives misleading noise reasoning: wider devices do not simply reduce their thermal-noise contribution.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36866,
        "output_tokens": 219,
        "total_tokens": 37085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36866,
        "output_tokens": 219,
        "total_tokens": 37085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance seen looking into the supply node of the ring oscillator, we can analyze the circuit based on the properties of the inverters and their small-signal models.\n\n### Step-by-Step Analysis:\n\n1. **Identify the Components**: The circuit consists of multiple inverters connected in a ring configuration. Each inverter can be modeled as a voltage-controlled voltage source (VCVS) with an output resistance.\n\n2. **Small-Signal Model**: For each inverter, we can represent it using its small-signal parameters:\n   - The output resistance \\( R_{out} \\) of each inverter is typically denoted as \\( r_o \\).\n   - The input resistance of each inverter is usually very high, so we can neglect it for this analysis.\n\n3. **Configuration of Inverters**: In a ring oscillator with \\( N \\) inverters, the output of one inverter is connected to the input of the next. The last inverter connects back to the first, forming a loop.\n\n4. **Resistance Calculation**:\n   - When looking into the supply node, we consider the output resistances of the inverters that are connected to this node.\n   - If we assume that each inverter has an output resistance \\( r_o \\), and there are \\( N \\) inverters in the ring, the total resistance seen looking into the supply node can be calculated as:\n     \\[\n     R_{in} = \\frac{r_o}{N}\n     \\]\n   - This is because the output resistances of the inverters are in parallel when looking into the supply node.\n\n### Conclusion:\nThe small-signal resistance \\( R_x \\) seen looking into the supply node of the ring oscillator is given by:\n\\[\nR_x = \\frac{r_o}{N}\n\\]\nwhere \\( r_o \\) is the output resistance of a single inverter and \\( N \\) is the number of inverters in the ring oscillator.",
        "format": "markdown",
        "sha256": "7d073556f198aeb0499538056550f9c3a26a059bbf091e470a2ee7755177fb20"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misses the oscillation-driven charging and discharging of the load capacitances and incorrectly treats inverter output resistances as parallel at the supply node. Its stated resistance is unsupported by the circuit connections.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36862,
        "output_tokens": 396,
        "total_tokens": 37258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36862,
        "output_tokens": 396,
        "total_tokens": 37258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance seen looking into the supply node of the ring oscillator, we can analyze the circuit based on the properties of the inverters and their small-signal models.\n\n### Step-by-Step Analysis:\n\n1. **Identify the Components**: The circuit consists of multiple inverters connected in a ring configuration. Each inverter can be modeled as a voltage-controlled voltage source (VCVS) with an output resistance.\n\n2. **Small-Signal Model**: For each inverter, we can represent it with its small-signal parameters:\n   - Each inverter has a small-signal output resistance \\( r_o \\).\n   - The input to each inverter can be modeled as a small-signal voltage source.\n\n3. **Resistance Calculation**:\n   - When looking into the supply node, we need to consider how the inverters are connected.\n   - If we assume that each inverter has an output resistance \\( r_o \\), and there are \\( N \\) inverters in the ring, the effective resistance seen looking into the supply node can be calculated.\n\n4. **Total Resistance**:\n   - The output resistances of the inverters are in parallel when looking into the supply node.\n   - Therefore, the total small-signal resistance \\( R_x \\) can be expressed as:\n     \\[\n     R_x = \\frac{r_o}{N}\n     \\]\n   where \\( N \\) is the number of inverters in the ring.\n\n### Conclusion:\nThe small-signal resistance seen looking into the supply node of the ring oscillator is given by:\n\\[\nR_x = \\frac{r_o}{N}\n\\]\nwhere \\( r_o \\) is the output resistance of a single inverter and \\( N \\) is the total number of inverters in the ring.",
        "format": "markdown",
        "sha256": "158238af0f7901eed62c624d45cef285e08e05033ef3df01cefec4becfea6a25"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly assumes inverter output resistances are simply in parallel at the supply node. It misses the dominant oscillation-driven charging and discharging of the three load capacitances, which gives approximately \\(R_x=1/(3f_0C_L)\\) (or a frequency-adjusted equivalent).",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36862,
        "output_tokens": 361,
        "total_tokens": 37223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36862,
        "output_tokens": 361,
        "total_tokens": 37223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance seen looking into the supply node of the ring oscillator, we can analyze the circuit based on the properties of the inverters and their small-signal models.\n\n### Step-by-Step Analysis:\n\n1. **Identify the Components**: The circuit consists of multiple inverters connected in a ring configuration. Each inverter can be modeled as a voltage-controlled voltage source (VCVS) with an output resistance.\n\n2. **Small-Signal Model**: For each inverter, we can represent it with its small-signal parameters:\n   - The output resistance \\( R_{out} \\) of each inverter.\n   - The input resistance \\( R_{in} \\) of each inverter, which is typically very high compared to \\( R_{out} \\).\n\n3. **Configuration**: In a ring oscillator, the output of one inverter is connected to the input of the next. This means that the output resistance of one inverter is seen by the input of the next inverter.\n\n4. **Resistance Calculation**:\n   - If we denote the output resistance of each inverter as \\( R_{out} \\), and there are \\( N \\) inverters in the ring, the total resistance seen looking into the supply node can be approximated as:\n     \\[\n     R_{total} = \\frac{R_{out}}{N}\n     \\]\n   - This is because the output resistances of the inverters are in parallel when looking into the supply node.\n\n5. **Final Expression**: Therefore, the small-signal resistance \\( R_X \\) seen looking into the supply node of the ring oscillator is:\n   \\[\n   R_X = \\frac{R_{out}}{N}\n   \\]\n\n### Conclusion:\nTo find the exact value of \\( R_X \\), you would need the specific value of \\( R_{out} \\) for the inverters and the number of inverters \\( N \\) in the ring oscillator.",
        "format": "markdown",
        "sha256": "3627b6e67b6ba50736504a7da5a99bc7abd7427070ed517af4872b5dae9efe1f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It incorrectly treats inverter output resistances as parallel at the supply node and gives an unsupported R_out/N result. It misses the dominant oscillation-driven charging and discharging of the load capacitances.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36862,
        "output_tokens": 396,
        "total_tokens": 37258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36862,
        "output_tokens": 396,
        "total_tokens": 37258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In a ring oscillator, the small-signal resistance \\( R_X \\) seen looking into the supply node is derived based on the transconductances of the NMOS and PMOS devices in each inverter. The expression given:\n\n\\[\nR_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right)\n\\]\n\nis valid under the assumption that the circuit is in a steady-state condition, where the oscillation frequency is not affecting the small-signal parameters significantly.\n\nHowever, when the circuit is oscillating, the operating point of the transistors changes dynamically as the output swings between high and low states. This can lead to variations in the effective transconductances \\( g_{mn} \\) and \\( g_{mp} \\) due to the nonlinear characteristics of the MOSFETs. \n\nAs the oscillation occurs, the average values of \\( g_{mn} \\) and \\( g_{mp} \\) may differ from their DC values, potentially affecting the small-signal resistance \\( R_X \\). The effective resistance seen looking into the supply node could change due to:\n\n1. **Dynamic Operating Point**: The transistors may operate in different regions (cut-off, saturation) during the oscillation, affecting their transconductance.\n2. **Frequency Dependence**: At higher frequencies, the small-signal parameters can also be influenced by parasitic capacitances and other frequency-dependent effects.\n\nIn summary, while the initial approximation for \\( R_X \\) is a good starting point, the oscillation does introduce complexities that can alter the effective resistance. Therefore, it is advisable to consider these factors and potentially derive a new expression for \\( R_X \\) that accounts for the dynamic behavior of the circuit during oscillation.",
        "format": "markdown",
        "sha256": "db33abf1cbca284f0764301865294c5a273d46b50b6f36b859a755d1f3dfafec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It notes that oscillation can alter the effective resistance, but omits the key capacitive charging/discharging mechanism and whether the result remains on the order of the MOS on-resistance. It offers only a vague claim that dynamic effects may change the answer.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36942,
        "output_tokens": 371,
        "total_tokens": 37313,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36942,
        "output_tokens": 371,
        "total_tokens": 37313,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In a ring oscillator, the small-signal resistance \\( R_X \\) seen looking into the supply node is derived based on the transconductances of the NMOS and PMOS devices in each inverter. The expression given:\n\n\\[\nR_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right)\n\\]\n\nis valid under the assumption that the circuit is in a steady state and that the transistors are operating in their active regions.\n\nWhen the circuit oscillates, the situation changes slightly. During oscillation, the transistors are not always in the same operating region; they switch between saturation and cutoff states. This dynamic behavior can affect the effective transconductance values \\( g_{mn} \\) and \\( g_{mp} \\) because they depend on the instantaneous operating point of the transistors.\n\n1. **Dynamic Behavior**: The oscillation causes the transconductances to vary over time, which means that the average values used in the calculation of \\( R_X \\) may not accurately represent the effective resistance during oscillation.\n\n2. **Nonlinear Effects**: The nonlinear characteristics of the MOSFETs can lead to different effective resistances during the transitions between states, which may not be captured by the simple linear approximation used in the steady-state analysis.\n\n3. **Frequency Dependence**: The frequency of oscillation can also influence the effective resistance seen at the supply node, as the transistors may not have enough time to settle into their steady-state values during each cycle.\n\nIn summary, while the expression for \\( R_X \\) provides a good approximation under steady-state conditions, it may not hold true during oscillation due to the dynamic nature of the circuit. Therefore, the answer does change when considering the oscillating behavior of the ring oscillator. A more detailed analysis, possibly involving time-domain simulations or small-signal analysis around the oscillation frequency, would be necessary to accurately determine \\( R_X \\) during oscillation.",
        "format": "markdown",
        "sha256": "4c5828c52a0e37bd664a03f752ca4e3b9cf4ad439edecf1f8f45fb94ceaf4b97"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It only says oscillation makes the transconductances vary and invalidates the static analysis. It misses the dominant capacitive charging mechanism and the conclusion that the resistance remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31360,
        "input_tokens": 36942,
        "output_tokens": 414,
        "total_tokens": 37356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31360,
        "input_tokens": 36942,
        "output_tokens": 414,
        "total_tokens": 37356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In a ring oscillator, the small-signal resistance \\( R_X \\) seen looking into the supply node is derived based on the transconductances of the NMOS and PMOS devices in each inverter. The expression given:\n\n\\[\nR_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right)\n\\]\n\nis valid under the assumption that the circuit is in a steady state and that the transistors are operating in their active regions.\n\nWhen the circuit oscillates, the situation changes slightly. During oscillation, the transistors are not always in the same operating region; they switch between saturation and cutoff as the output toggles. This dynamic behavior can affect the effective transconductance values \\( g_{mn} \\) and \\( g_{mp} \\) at any given moment.\n\nHowever, the fundamental relationship for \\( R_X \\) remains similar, but the effective transconductances may vary due to the oscillation. The average values of \\( g_{mn} \\) and \\( g_{mp} \\) during oscillation can be used to approximate \\( R_X \\), but they may not be constant and could depend on the frequency of oscillation and the specific characteristics of the transistors.\n\nIn summary, while the expression for \\( R_X \\) does not fundamentally change, the values of \\( g_{mn} \\) and \\( g_{mp} \\) used in the calculation may need to be adjusted to reflect their average values during oscillation. Thus, the answer can change in terms of the specific numerical values used in the calculation, but the form of the expression remains the same.",
        "format": "markdown",
        "sha256": "afee711fc94b45eca16feda03f1fe1e9151fd22be4c2da6b30164f2dcf79f882"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It suggests the resistance remains similar to the static expression, but incorrectly attributes this to averaged transconductances and misses the oscillatory supply current from charging and discharging node capacitances. This merits partial credit for the broadly similar-magnitude conclusion.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31360,
        "input_tokens": 36942,
        "output_tokens": 345,
        "total_tokens": 37287,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31360,
        "input_tokens": 36942,
        "output_tokens": 345,
        "total_tokens": 37287,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit, M7 is likely a transistor that plays a role in the overall gain of the circuit. As the width of M7 increases, the following effects can be expected:\n\n1. **Transconductance Increase**: The transconductance (\\(g_m\\)) of a MOSFET is proportional to its width (W). Therefore, increasing the width of M7 will increase its transconductance, which can lead to a higher voltage gain.\n\n2. **Output Impedance**: The output impedance of the circuit may also be affected. A larger width can lead to a lower output impedance, which can further enhance the voltage gain.\n\n3. **Current Drive Capability**: A wider M7 can drive more current, which can improve the performance of the circuit under varying load conditions.\n\n4. **Gain Bandwidth Product**: While the initial voltage gain may increase, the gain-bandwidth product may remain constant, meaning that as gain increases, the bandwidth may decrease.\n\nIn summary, increasing the width of M7 generally leads to an increase in the initial voltage gain of the circuit due to higher transconductance and improved current drive capability. However, it is essential to consider the trade-offs in bandwidth and other performance metrics.",
        "format": "markdown",
        "sha256": "aae7e54108caeede6554dce29aedf3df8d87f2693ec482845b0ed3b4dd7e77d5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives the opposite trend. A wider M7 increases tail current, which reduces the initial integration gain; the generic claim that higher transconductance raises gain misses this mechanism.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36865,
        "output_tokens": 250,
        "total_tokens": 37115,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36865,
        "output_tokens": 250,
        "total_tokens": 37115,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit, M7 is likely functioning as a switch or a load transistor that influences the overall gain of the circuit. As the width of M7 increases, the following effects can be expected:\n\n1. **Increased Transconductance (gm)**: The transconductance of a MOSFET is proportional to its width (W). Therefore, increasing the width of M7 will increase its transconductance, which can enhance the voltage gain of the circuit.\n\n2. **Lower Output Resistance**: A wider M7 will also have a lower output resistance. This can affect the overall gain, as the gain is often inversely related to the output resistance in certain configurations.\n\n3. **Improved Drive Capability**: A wider M7 can drive larger loads more effectively, which can also contribute to a higher voltage gain under certain conditions.\n\n4. **Potential for Non-Ideal Effects**: However, increasing the width too much can lead to non-ideal effects such as increased parasitic capacitance, which may limit the frequency response and potentially reduce the gain at higher frequencies.\n\nIn summary, increasing the width of M7 generally leads to an increase in the initial voltage gain due to higher transconductance and lower output resistance, but care must be taken to avoid excessive width that could introduce non-ideal behaviors.",
        "format": "markdown",
        "sha256": "73094008893f49c991b6cd10b08b4ac61a7222c4b4dd4a7390d08806986f3e06"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer gives the opposite trend: initial gain decreases as M7 widens. It also misidentifies M7's role and misses that increased tail current reduces the input pair's gain.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36865,
        "output_tokens": 266,
        "total_tokens": 37131,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36865,
        "output_tokens": 266,
        "total_tokens": 37131,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit, M7 is likely functioning as a switch or a load transistor that influences the overall gain of the circuit. As the width of M7 increases, the following effects can be expected:\n\n1. **Increased Transconductance (gm)**: The transconductance of a MOSFET is proportional to its width (W). Therefore, increasing the width of M7 will increase its transconductance, which can enhance the voltage gain of the circuit.\n\n2. **Lower Output Resistance**: A wider M7 will also have a lower output resistance. This can affect the overall gain, as the gain is often inversely related to the output resistance in certain configurations.\n\n3. **Improved Drive Capability**: A wider M7 can drive larger loads more effectively, which can also contribute to a higher voltage gain under certain conditions.\n\n4. **Potential for Non-Ideal Effects**: However, increasing the width too much can lead to non-ideal effects such as increased parasitic capacitance, which may limit the frequency response and potentially reduce gain at higher frequencies.\n\nIn summary, increasing the width of M7 generally leads to an increase in the initial voltage gain due to higher transconductance and lower output resistance, but care must be taken to avoid excessive width that could introduce non-ideal behaviors.",
        "format": "markdown",
        "sha256": "41476259c5bdec4539fa1236d02b8d4a71cf7a928b9edfec39bb7295ed8cbf6a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite trend: widening M7 increases tail current and decreases the initial gain. It also misidentifies M7's role and applies generic transconductance and output-resistance arguments that do not explain this gain.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36865,
        "output_tokens": 265,
        "total_tokens": 37130,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36865,
        "output_tokens": 265,
        "total_tokens": 37130,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit, increasing the capacitance at nodes P and Q will generally affect the voltage gain in the following ways:\n\n1. **Increased Capacitance**: Higher capacitance at nodes P and Q can lead to a lower cutoff frequency. This means that the circuit can respond to lower frequency signals more effectively, which may improve the gain at those frequencies.\n\n2. **Stability and Phase Margin**: Increasing capacitance can also improve stability by providing better phase margin, which can help prevent oscillations in certain configurations. However, if the capacitance is too high, it may introduce delays that could negatively impact the overall frequency response.\n\n3. **Voltage Gain**: The initial voltage gain may increase due to the improved coupling and filtering effects of the larger capacitance, allowing for better signal integrity. However, if the capacitance is excessively large, it could lead to a decrease in gain at higher frequencies due to the increased reactance.\n\nIn summary, increasing the capacitance at nodes P and Q can enhance the voltage gain at lower frequencies while potentially affecting the gain at higher frequencies and overall stability. The exact impact would depend on the specific circuit parameters and operating conditions.",
        "format": "markdown",
        "sha256": "cbf54c4fb1bd97f1ed56eeeb594afc6819f2ecfcf063395a6c14b93cd86ad5de"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer does not identify that the initial gain remains essentially unchanged; it speculates that capacitance may increase gain based on generic frequency-response effects. It notes possible delay, but misses the key cancellation between the slower discharge and longer amplification interval.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36865,
        "output_tokens": 237,
        "total_tokens": 37102,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36865,
        "output_tokens": 237,
        "total_tokens": 37102,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit, increasing the capacitance at nodes P and Q will generally affect the voltage gain in the following ways:\n\n1. **Increased Capacitance**: Higher capacitance at nodes P and Q can lead to a lower cutoff frequency. This means that the circuit can respond to lower frequency signals more effectively, which may improve the gain at those frequencies.\n\n2. **Stability and Phase Margin**: Increasing capacitance can also improve stability by providing better phase margin, which can help prevent oscillations in certain configurations. However, if the capacitance is too high, it may introduce delays that could negatively impact the overall frequency response.\n\n3. **Voltage Gain**: The initial voltage gain may increase at lower frequencies due to the increased capacitance, but it could also lead to a decrease in gain at higher frequencies due to the increased reactance of the capacitors.\n\nIn summary, increasing the capacitance at nodes P and Q can enhance the voltage gain at lower frequencies while potentially reducing it at higher frequencies, depending on the specific characteristics of the circuit and the values of the other components involved.",
        "format": "markdown",
        "sha256": "1e49d2d00781d4b913475a1fe9d7a26d9de8f3b0f76bce1ed3154d38c13bd159"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer does not identify that the initial gain remains approximately unchanged. It substitutes generic frequency-response claims for the comparator’s gain mechanism; the added capacitance mainly slows the transient.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36865,
        "output_tokens": 222,
        "total_tokens": 37087,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36865,
        "output_tokens": 222,
        "total_tokens": 37087,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit, increasing the capacitance at nodes P and Q will generally affect the voltage gain in the following ways:\n\n1. **Increased Capacitance**: Higher capacitance at nodes P and Q can lead to a lower cutoff frequency, which may enhance the low-frequency response of the circuit. This can improve the overall gain at lower frequencies.\n\n2. **Stability and Phase Margin**: Increasing capacitance can also improve stability by providing better phase margin, which can help maintain gain across a wider frequency range.\n\n3. **Transient Response**: Larger capacitance can slow down the transient response of the circuit, potentially affecting the speed of the output signal. This may lead to a reduction in the effective gain at higher frequencies due to increased time constants.\n\n4. **Loading Effects**: If the capacitance is too large, it may introduce loading effects that could reduce the overall gain, especially if the driving source cannot supply the necessary current.\n\nIn summary, while increasing capacitance at nodes P and Q can enhance low-frequency gain and stability, it may also slow down the circuit's response and potentially reduce gain at higher frequencies. The overall effect on voltage gain will depend on the specific characteristics of the circuit and the values of the components involved.",
        "format": "markdown",
        "sha256": "80aaef59b65e180332c6a8fd2a1d2ff5f42462d7265e4399b1eb4c11a1a082a4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It notes that larger capacitance slows the transient, but misses the key result that the initial gain remains essentially unchanged because the longer amplification interval cancels the reduced voltage slope. Its claims about low-frequency gain and stability do not answer the question.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36865,
        "output_tokens": 252,
        "total_tokens": 37117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36865,
        "output_tokens": 252,
        "total_tokens": 37117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of transistors M5 and M6 in the given circuit can improve the speed of the circuit. Here's why:\n\n1. **Drive Strength**: Wider transistors have a higher drive current capability, which allows them to charge and discharge capacitances more quickly. This can lead to faster switching times.\n\n2. **Reduced Resistance**: Wider transistors have lower on-resistance, which can reduce the delay associated with the output nodes (X and Y) transitioning between high and low states.\n\n3. **Improved Performance**: In digital circuits, faster transitions can lead to improved overall performance, as the circuit can operate at higher frequencies.\n\nHowever, it's important to consider that increasing the width also increases power consumption and may lead to increased capacitance, which could counteract some of the speed benefits if not managed properly. Balancing these factors is crucial for optimal circuit design.",
        "format": "markdown",
        "sha256": "3494e55af225a8266157dbe40e48176daa368c7da59fb79601d5f0af6687f76d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer gives the correct direction and recognizes that added capacitance can limit the benefit. However, it does not identify the cross-coupled PMOS regeneration mechanism or clearly state that the improvement is initial and eventually reaches an optimum.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36864,
        "output_tokens": 178,
        "total_tokens": 37042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36864,
        "output_tokens": 178,
        "total_tokens": 37042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of transistors M5 and M6 in the circuit can improve the speed of the circuit. Here's why:\n\n1. **Drive Strength**: Wider transistors have higher drive strength, which means they can charge and discharge capacitances more quickly. This is particularly important in digital circuits where switching speed is critical.\n\n2. **Reduced Resistance**: Wider transistors have lower on-resistance, which reduces the time it takes for the output to reach the desired voltage levels.\n\n3. **Increased Current**: With increased width, M5 and M6 can allow more current to flow, which can help in faster transitions between logic levels.\n\nHowever, it's important to consider that increasing the width also leads to higher power consumption and may affect the overall performance in terms of power efficiency and heat dissipation. Therefore, while speed may improve, it should be balanced with power considerations in the design.",
        "format": "markdown",
        "sha256": "359e28ab03a364a0a97b6bc98649be614822eabaca809a03b43188391260920a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the initial speed improvement from stronger drive, but omits that M5/M6 strengthen latch regeneration and that their added parasitic capacitance eventually limits the benefit.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36864,
        "output_tokens": 181,
        "total_tokens": 37045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36864,
        "output_tokens": 181,
        "total_tokens": 37045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of transistors M5 and M6 in the circuit can improve the speed of the circuit. Here's why:\n\n1. **Drive Strength**: Wider transistors have a higher drive current capability, which allows them to charge and discharge capacitances more quickly. This can lead to faster switching times.\n\n2. **Reduced Resistance**: Wider transistors have lower on-resistance, which can reduce the delay associated with the output nodes (X and Y) charging and discharging.\n\n3. **Improved Performance**: In digital circuits, faster transitions between high and low states can improve overall performance and reduce propagation delays.\n\nHowever, it's important to consider that increasing the width also increases power consumption and may lead to increased capacitance, which could counteract some of the speed benefits if not managed properly. Balancing these factors is crucial for optimal circuit design.",
        "format": "markdown",
        "sha256": "aa6b2325ad85d5ea8459f9810bb90075918cd8f4427cf3759060bc1048809266"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly says wider M5/M6 can improve speed and notes that added capacitance may limit the benefit. However, it does not identify their cross-coupled regenerative role or clearly state that the improvement is initial and eventually reaches an optimum.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36864,
        "output_tokens": 173,
        "total_tokens": 37037,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36864,
        "output_tokens": 173,
        "total_tokens": 37037,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors in the circuit can improve the speed of the circuit. Here's why:\n\n1. **Drive Strength**: Wider transistors have a higher drive current capability, which allows them to charge and discharge capacitive loads more quickly. This can lead to faster switching times.\n\n2. **Reduced Resistance**: Wider transistors have lower on-resistance, which reduces the voltage drop across them when they are conducting. This can help maintain signal integrity and speed.\n\n3. **Increased Capacitance**: While increasing width also increases gate capacitance, the overall effect is often beneficial because the increased drive strength can compensate for the additional capacitance.\n\nHowever, it's important to consider that increasing the width of transistors can also lead to increased power consumption and potential issues with signal integrity if not managed properly. Therefore, while speed may improve, the overall design must balance speed, power, and area considerations.",
        "format": "markdown",
        "sha256": "b979a47cd1931968383d0f96f71e142c9c87142fc1e108d52b05cc75bffad4c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that widening lowers on-resistance and can improve speed, but misses the relevant added drain capacitance at the latch nodes that eventually limits or reverses the benefit; its gate-capacitance discussion does not capture that tradeoff.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25534,
        "output_tokens": 187,
        "total_tokens": 25721,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25534,
        "output_tokens": 187,
        "total_tokens": 25721,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors in the circuit can improve the speed of the circuit. Here's why:\n\n1. **Drive Strength**: Wider transistors have a higher drive strength, which means they can charge and discharge the load capacitance more quickly. This leads to faster switching times.\n\n2. **Reduced Resistance**: Wider transistors have lower on-resistance, which reduces the time it takes for the output to reach the desired voltage levels.\n\n3. **Increased Current**: With increased width, the transistors can allow more current to flow, which can help in quickly charging or discharging capacitive loads.\n\nHowever, it's important to note that while increasing the width can improve speed, it may also lead to increased power consumption and potentially affect the overall performance of the circuit in terms of heat dissipation and power efficiency. Therefore, a balance must be struck based on the specific requirements of the application.",
        "format": "markdown",
        "sha256": "c34a234b7cf1233283e8a128a038946b09cc755c0ea8d71cd1a19e6cbb1c6303"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly says widening the clocked transistors improves speed because it lowers their on-resistance, but omits the added node capacitance that eventually limits or reverses the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25534,
        "output_tokens": 185,
        "total_tokens": 25719,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25534,
        "output_tokens": 185,
        "total_tokens": 25719,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors in the circuit can improve the speed of the circuit. Here's why:\n\n1. **Drive Strength**: Wider transistors have a higher drive strength, which means they can charge and discharge the load capacitance more quickly. This leads to faster switching times.\n\n2. **Reduced Resistance**: Wider transistors have lower on-resistance, which reduces the time it takes for the output to reach the desired voltage levels.\n\n3. **Increased Current**: With increased width, the transistors can allow more current to flow, which can help in quickly charging or discharging capacitive loads.\n\nHowever, there are trade-offs to consider:\n\n- **Increased Power Consumption**: Wider transistors can lead to higher static and dynamic power consumption, which may not be desirable in low-power applications.\n\n- **Area**: Increasing the width of transistors will also increase the area of the circuit, which may be a concern in compact designs.\n\nIn summary, while increasing the widths of the clocked transistors generally improves speed, it is essential to balance this with power consumption and area considerations.",
        "format": "markdown",
        "sha256": "21028e39011f2f62720594074af5eca4f8b66776e64df57b4287594cede52611"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that wider clocked transistors reduce on-resistance and can improve speed, but omits the added latch-node capacitance that eventually limits or reverses the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25534,
        "output_tokens": 226,
        "total_tokens": 25760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25534,
        "output_tokens": 226,
        "total_tokens": 25760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The structure in the figure appears to be a type of analog circuit that could potentially provide quadrature outputs, depending on its specific configuration and operation. Quadrature outputs typically refer to two signals that are 90 degrees out of phase with each other.\n\nIn this circuit, the presence of clock signals (CK) and the arrangement of the transistors suggest that it may be designed for signal processing applications, possibly involving phase shifting or modulation. The inverter (Inv3) at the output could be used to create a phase shift, which is a common technique in generating quadrature signals.\n\nTo confirm whether it indeed provides quadrature outputs, one would need to analyze the circuit's operation in detail, including the timing of the clock signals and the behavior of the transistors in response to those signals. If the outputs Y and Z are indeed 90 degrees out of phase, then the circuit would be providing quadrature outputs.",
        "format": "markdown",
        "sha256": "6a9d0ac9c823ebb6ad2b73efac7e1b2e2aa6112d455a5308d490a26bb8290509"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer does not identify the divide-by-two operation or explain the nominal quadrature timing. It suggests the inverter creates a phase shift and names Y and Z as a possible quadrature pair, although they are the inverter input and output; it also misses the reasons quadrature is not exact.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25519,
        "output_tokens": 182,
        "total_tokens": 25701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25519,
        "output_tokens": 182,
        "total_tokens": 25701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The structure in the figure appears to be a type of switched-capacitor circuit, which can be designed to provide quadrature outputs. Quadrature outputs typically refer to two signals that are 90 degrees out of phase with each other.\n\nIn this circuit, the use of clock signals (CK and \\(\\overline{CK}\\)) suggests that it is likely designed to sample or process signals in a way that could produce quadrature outputs. The presence of the inverter (Inv3) indicates that one of the outputs (Z) could be the inverted version of another signal (Y), which is a common method to achieve phase-shifted outputs.\n\nTo confirm whether it specifically provides quadrature outputs, one would need to analyze the timing and operation of the switches and capacitors in the circuit in relation to the input signals. If the outputs Y and Z are indeed 90 degrees out of phase, then the structure does provide quadrature outputs.",
        "format": "markdown",
        "sha256": "7d5819c1ab96fabce7cc53d798adb3566313e3d5ebde10d26b5286de81da9e53"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as switched-capacitor and never establishes its divide-by-two timing or nominal quadrature relationship. It offers only a conditional statement and misses both sources of nonideal phase error.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25519,
        "output_tokens": 189,
        "total_tokens": 25708,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25519,
        "output_tokens": 189,
        "total_tokens": 25708,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The structure in the figure appears to be a type of analog circuit that could potentially provide quadrature outputs. Quadrature outputs typically refer to two signals that are 90 degrees out of phase with each other, often used in applications like phase detection or signal processing.\n\nIn this circuit, the presence of clock signals (CK) and the arrangement of the transistors suggest that it may be designed to generate signals that could be phase-shifted. The inverter (Inv3) also indicates that one of the outputs (Y or Z) could be the inverted version of the other, which is a common method to achieve quadrature.\n\nTo confirm whether it indeed provides quadrature outputs, one would need to analyze the timing and behavior of the circuit under specific conditions, particularly how the outputs Y and Z relate to each other in terms of phase.",
        "format": "markdown",
        "sha256": "adda98524d088e6f5620e78e4183984c0b82dfd9c51da5df9006de06e9c8f2c5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer does not identify the divide-by-two timing that gives nominal quadrature, and it incorrectly suggests that inversion itself creates quadrature. It also omits the inverter-delay and unequal-loading departures from exact quadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25519,
        "output_tokens": 167,
        "total_tokens": 25686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25519,
        "output_tokens": 167,
        "total_tokens": 25686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors in the circuit can improve the speed of the circuit. Here's why:\n\n1. **Drive Strength**: Wider transistors have a higher drive strength, which means they can charge and discharge the load capacitance more quickly. This leads to faster switching times.\n\n2. **Reduced Resistance**: Wider transistors have lower on-resistance, which reduces the time it takes for the output to reach the desired voltage levels.\n\n3. **Increased Current**: With increased width, the transistors can allow more current to flow, which helps in quickly charging or discharging capacitive loads.\n\nHowever, there are trade-offs to consider:\n\n- **Increased Power Consumption**: Wider transistors can lead to higher static power consumption due to increased leakage currents.\n\n- **Area**: Increasing the width of transistors will also increase the area of the circuit, which may not be desirable in compact designs.\n\nIn summary, while increasing the widths of the clocked transistors generally improves speed, it is essential to balance this with power consumption and area considerations.",
        "format": "markdown",
        "sha256": "47f48e37181e38bdca3ef37ca5533d4bd73ab22e1fb0f45554dc5b9f28572624"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed and cites their lower on-resistance, but omits the topology-specific charge-sharing limitation.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25534,
        "output_tokens": 218,
        "total_tokens": 25752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25534,
        "output_tokens": 218,
        "total_tokens": 25752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors in the circuit can improve the speed of the circuit. Here's why:\n\n1. **Drive Strength**: Wider transistors have a higher drive strength, which means they can charge and discharge the load capacitance more quickly. This leads to faster switching times.\n\n2. **Reduced Resistance**: Wider transistors have lower on-resistance, which reduces the time it takes for the output to transition from one state to another.\n\n3. **Increased Current**: With increased width, the transistors can allow more current to flow, which helps in quickly charging or discharging capacitive loads.\n\nHowever, there are trade-offs to consider:\n\n- **Increased Power Consumption**: Wider transistors can lead to higher static and dynamic power consumption, which may not be desirable in low-power applications.\n\n- **Area**: Increasing the width of transistors will also increase the area of the circuit, which might be a concern in compact designs.\n\nIn summary, while increasing the widths of the clocked transistors generally improves speed, it is essential to balance this with power consumption and area considerations.",
        "format": "markdown",
        "sha256": "b42f90c5bb569ceb3debe1c725585232070a3d7309b4e41878ccbe21447501d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that wider clocked transistors improve speed because they lower on-resistance, but omits the charge-sharing effect that degrades swing and limits the benefit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19968,
        "input_tokens": 25534,
        "output_tokens": 226,
        "total_tokens": 25760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19968,
        "input_tokens": 25534,
        "output_tokens": 226,
        "total_tokens": 25760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors in the circuit can improve the speed of the circuit. Here's why:\n\n1. **Drive Strength**: Wider transistors have a higher drive strength, which means they can charge and discharge the load capacitance more quickly. This leads to faster switching times.\n\n2. **Reduced Resistance**: Wider transistors have lower on-resistance, which reduces the time it takes for the output to reach the desired voltage levels.\n\n3. **Increased Current**: With increased width, the transistors can allow more current to flow, which helps in quickly charging or discharging capacitive loads.\n\nHowever, there are trade-offs to consider:\n\n- **Increased Power Consumption**: Wider transistors can lead to higher static power consumption due to increased leakage currents.\n\n- **Area**: Increasing the width of transistors will also increase the area of the circuit, which may not be desirable in compact designs.\n\nIn summary, while increasing the widths of the clocked transistors generally improves speed, it is essential to balance this with power consumption and area considerations.",
        "format": "markdown",
        "sha256": "47f48e37181e38bdca3ef37ca5533d4bd73ab22e1fb0f45554dc5b9f28572624"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed and cites their lower on-resistance, but omits the topology-specific charge-sharing limitation.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19968,
        "input_tokens": 25534,
        "output_tokens": 218,
        "total_tokens": 25752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19968,
        "input_tokens": 25534,
        "output_tokens": 218,
        "total_tokens": 25752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure depicts a digital logic circuit consisting of inverters (NOT gates) arranged in a sequence. Here's a breakdown of the arrangement:\n\n1. **Inputs**: The circuit has two inputs labeled \\( CK \\) and \\( \\overline{CK} \\) (the complement of \\( CK \\)).\n  \n2. **Inverters**: \n   - The first inverter, labeled \\( Inv_1 \\), takes the \\( CK \\) input and outputs its negation.\n   - The output of \\( Inv_1 \\) is then connected to the next inverter, which continues the negation process.\n\n3. **Output**: The final output will depend on the number of inverters in the sequence. Each inverter inverts the signal it receives:\n   - If there are an even number of inverters, the output will be the same as the original input.\n   - If there are an odd number of inverters, the output will be the negation of the original input.\n\n4. **Functionality**: This arrangement can be used in various applications, such as signal conditioning, clock signal manipulation, or creating specific timing sequences in digital circuits.\n\nOverall, the circuit effectively manipulates the input signals through a series of logical inversions, which can be crucial for timing and control in digital systems.",
        "format": "markdown",
        "sha256": "347a9f7be12f07266f42e19b9aea4319c720ae2e02d0f45264da03eb0bdc9de6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a sequence of inverters and misses its essential function: a divide-by-two built from dynamic latches.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36849,
        "output_tokens": 263,
        "total_tokens": 37112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36849,
        "output_tokens": 263,
        "total_tokens": 37112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure depicts a digital logic circuit consisting of inverters (NOT gates) and a clock signal (CK). Here's a breakdown of the arrangement:\n\n1. **Clock Signal (CK)**: The circuit starts with a clock signal, which is typically used to synchronize operations in digital circuits.\n\n2. **Inverter (Inv1)**: The first inverter takes the CK signal as input and outputs its negation (¬CK). This means that when CK is high (1), the output of Inv1 will be low (0), and vice versa.\n\n3. **Subsequent Inverters**: After Inv1, there is another inverter that takes the output of Inv1 (¬CK) as its input. This inverter will output CK again, effectively restoring the original clock signal.\n\n4. **Additional Inverters**: The pattern continues with additional inverters. Each inverter inverts the signal from the previous stage. If there are an even number of inverters, the final output will be the same as the original CK signal. If there are an odd number of inverters, the output will be the negation of CK.\n\n### Summary:\n- The arrangement consists of a series of inverters that alternately invert the input signal.\n- The output depends on the number of inverters: even results in the original signal, odd results in the negated signal.\n- This type of arrangement can be used for signal conditioning, timing adjustments, or creating specific logic functions in digital circuits.",
        "format": "markdown",
        "sha256": "4bb95cb4c57ae319c1c121f8f4650d8d81ff06ffd5ac21dd83364a09369dcda2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a series of inverters and misses its essential function as a divide-by-two circuit built from dynamic latches.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36849,
        "output_tokens": 298,
        "total_tokens": 37147,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36849,
        "output_tokens": 298,
        "total_tokens": 37147,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure depicts a digital logic circuit consisting of inverters (NOT gates) and a clock signal (CK). Here's a breakdown of the arrangement:\n\n1. **Clock Signal (CK)**: The circuit starts with a clock signal, which is typically used to synchronize operations in digital circuits.\n\n2. **Inverter (Inv1)**: The first inverter takes the CK signal as input and outputs its negation (¬CK). This means that when CK is high (1), Inv1 outputs low (0), and vice versa.\n\n3. **Second Inverter**: The output of Inv1 (¬CK) is then fed into another inverter. This inverter will output CK again, effectively restoring the original clock signal.\n\n4. **Subsequent Inverters**: The circuit continues with additional inverters. Each inverter inverts the signal it receives. If the output of the previous inverter is high, the next one will output low, and vice versa.\n\n5. **Final Output**: The arrangement of inverters creates a chain where the output alternates between high and low states based on the input clock signal. The number of inverters determines the delay and the final output state.\n\n### Summary:\n- The circuit is a series of inverters that manipulate a clock signal.\n- It can be used for signal conditioning, creating delays, or generating specific timing sequences in digital systems.\n- The overall behavior depends on the number of inverters and their arrangement, affecting the timing and logic levels of the output signal.",
        "format": "markdown",
        "sha256": "7ef5713c0f815ca815d3e4dceddc63cd53e5b6bc474c3d757a9f054b095d1a0f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the circuit as a chain of inverters and misses the dynamic-latch divide-by-two function.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36849,
        "output_tokens": 303,
        "total_tokens": 37152,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36849,
        "output_tokens": 303,
        "total_tokens": 37152,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter in the figure plays a crucial role in the performance of the circuit. Here are some key effects it may have:\n\n1. **Signal Inversion**: The red inverter inverts the input signal (CK). This means that if CK is high, the output of the red inverter will be low, and vice versa. This inversion can be critical for timing and control in sequential circuits.\n\n2. **Timing Adjustments**: By introducing an additional inverter, the circuit can adjust the timing of the signal propagation. This can help in synchronizing signals in a clocked system, ensuring that downstream components receive the correct timing.\n\n3. **Signal Integrity**: The inverter can help restore signal levels, especially if the signal has degraded due to capacitance or resistance in the circuit. This can improve the overall reliability of the signal being processed.\n\n4. **Propagation Delay**: The addition of an inverter introduces a propagation delay. This delay must be considered in the overall timing analysis of the circuit, as it can affect the performance, especially in high-speed applications.\n\n5. **Load Driving Capability**: The inverter can also help drive larger loads downstream, improving the circuit's ability to handle multiple inputs or outputs without signal degradation.\n\nOverall, the red inverter enhances the circuit's functionality by providing inversion, timing adjustments, and improved signal integrity, but it also introduces additional delay that must be managed in the design.",
        "format": "markdown",
        "sha256": "257713ce407a4c80726e5693a2612257ce951b452e6969a9ee97635b8d80344d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer treats the red inverter as a generic clock inverter and discusses generic delay and signal integrity, missing its feedforward path, speed benefit, and low-frequency failure mechanism.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36854,
        "output_tokens": 283,
        "total_tokens": 37137,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36854,
        "output_tokens": 283,
        "total_tokens": 37137,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter in the figure serves as an additional logic gate that can influence the performance of the circuit in several ways:\n\n1. **Signal Inversion**: The red inverter inverts the input signal (CK). This means that the output of this inverter will be the opposite of the CK signal, which can be crucial for timing and synchronization in sequential circuits.\n\n2. **Timing Adjustments**: By introducing an additional inverter, the propagation delay may increase. This can affect the overall timing of the circuit, potentially leading to setup and hold time violations if not properly accounted for.\n\n3. **Logic Level Control**: The inverter can help in controlling the logic levels seen by subsequent gates. This can be particularly useful in ensuring that the correct logic levels are maintained throughout the circuit.\n\n4. **Power Consumption**: Adding an inverter can increase power consumption due to the additional switching activity. However, it may also help in reducing power in certain configurations by optimizing the logic levels.\n\n5. **Noise Margin**: The inverter can improve noise margins by providing a stronger drive capability for the subsequent stages, which can be beneficial in noisy environments.\n\nOverall, the red inverter modifies the behavior of the circuit, impacting its performance in terms of speed, power, and reliability. Proper analysis is necessary to ensure that these changes align with the desired circuit specifications.",
        "format": "markdown",
        "sha256": "a2af518d7361c32808ed7c735fcc171030e8069be6ee7b138ddd4a74194e3d0a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as inverting CK and gives generic inverter effects. It misses the feedforward bypass that improves speed and the unclocked branch’s low-frequency drawback.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36854,
        "output_tokens": 268,
        "total_tokens": 37122,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36854,
        "output_tokens": 268,
        "total_tokens": 37122,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter in the figure serves as an additional logic gate that can influence the overall performance of the circuit in several ways:\n\n1. **Signal Inversion**: The red inverter inverts the input signal (CK). This means that the output of this inverter will be the opposite of the CK signal, which can be crucial for timing and synchronization in sequential circuits.\n\n2. **Timing Adjustments**: By introducing an additional inverter, the propagation delay may increase. This can affect the timing of the circuit, potentially leading to setup and hold time violations if not properly accounted for.\n\n3. **Logic Level Control**: The red inverter can help control the logic levels seen by subsequent gates. This can be particularly useful in ensuring that the correct logic levels are maintained throughout the circuit.\n\n4. **Power Consumption**: Adding an inverter can increase power consumption due to the additional switching activity. However, it may also help in reducing power in certain configurations by optimizing the logic levels.\n\n5. **Noise Margin**: The inverter can improve noise margins by providing a stronger drive capability for the subsequent stages, which can be beneficial in noisy environments.\n\n6. **Circuit Complexity**: The addition of the inverter increases the complexity of the circuit, which may affect design considerations such as area and routing in an integrated circuit.\n\nOverall, the red inverter can enhance functionality but requires careful consideration of its impact on timing, power, and overall circuit design.",
        "format": "markdown",
        "sha256": "cafbfb41f0bac29fa7951748e3f572ac10e1c3d7af1a13c27dc6477a28877d34"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the red inverter as inverting CK and gives generic gate effects, missing the feedforward bypass that improves speed and its low-frequency drawback.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36854,
        "output_tokens": 286,
        "total_tokens": 37140,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36854,
        "output_tokens": 286,
        "total_tokens": 37140,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter in the circuit acts as a keeper, which helps maintain the state of the latch formed by `Inv1` and the red inverter itself. This configuration allows the latch to hold its state even when the clock signal is not actively driving the circuit, effectively reducing the minimum clock frequency requirement due to leakage currents.\n\nIn summary, the red inverter does indeed function as a keeper in a cross-coupled latch configuration, helping to stabilize the output and mitigate issues related to leakage, thus allowing for lower frequency operation. The original answer is correct in this context.",
        "format": "markdown",
        "sha256": "fdc27a6568f6fb455080dc94e13508d8d9b6b3500a5b147bb26e02049e86681a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the red inverter a cross-coupled keeper. It is an unclocked feedforward branch that can aid high-speed operation but overpower the latch path at low frequencies, raising the minimum usable clock rate.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36899,
        "output_tokens": 113,
        "total_tokens": 37012,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36899,
        "output_tokens": 113,
        "total_tokens": 37012,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter in the circuit acts as a keeper, which helps maintain the state of the latch formed with `Inv1`. This configuration allows the latch to hold its value even when the clock signal is low, effectively reducing the minimum clock frequency requirement due to leakage currents.\n\nIn essence, the red inverter provides feedback that stabilizes the output of the latch, ensuring that it retains its state without needing constant clocking. This is particularly useful in low-power designs where minimizing dynamic power consumption is crucial. \n\nSo, the answer you provided is correct in stating that the red inverter acts as a keeper and helps mitigate the minimum clock frequency requirement due to leakage.",
        "format": "markdown",
        "sha256": "64a464a6a7e076ae50b0d44b65b5994c6e751ea700cd98070b82db2a1057a233"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It incorrectly identifies the red inverter as a keeper cross-coupled with Inv1. The actual branch is feedforward, bypasses part of the latch path, and can raise the minimum usable clock frequency at low rates.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36899,
        "output_tokens": 130,
        "total_tokens": 37029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36899,
        "output_tokens": 130,
        "total_tokens": 37029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter in the circuit acts as a keeper, which helps maintain the state of the latch formed by `Inv1` and the red inverter itself. This configuration allows the latch to hold its state even when the clock signal is not actively driving the circuit, effectively mitigating issues related to leakage currents that could otherwise cause the latch to lose its state.\n\nThe statement about removing the minimum clock frequency requirement due to leakage is generally accurate. By providing feedback through the keeper inverter, the circuit can retain its state without needing a continuous clock signal, thus reducing the dependency on a minimum clock frequency.\n\nIn summary, the red inverter's role is indeed to act as a keeper, enhancing the stability of the latch and addressing leakage concerns.",
        "format": "markdown",
        "sha256": "c26d4dcad98105642f79adefbc78e04bbecd341790a54af5ff15c9fcb653e701"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer repeats the incorrect keeper interpretation. The red inverter is an unclocked feedforward branch that bypasses part of the latch path; it can help at high speed but can overpower the intended behavior at low clock rates and raise the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36899,
        "output_tokens": 144,
        "total_tokens": 37043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36899,
        "output_tokens": 144,
        "total_tokens": 37043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the circuit for noise figure (NF) while keeping the input resistance \\( R_{in} \\) at 50 Ohms, consider the following steps:\n\n1. **Biasing of Transistors**: Ensure that the transistors \\( M_1 \\) and \\( M_2 \\) are properly biased to operate in their optimal region (usually saturation for MOSFETs). This will help minimize distortion and improve linearity, which can contribute to a better NF.\n\n2. **Feedback Resistor \\( R_F \\)**: The value of \\( R_F \\) can significantly affect the gain and noise performance of the circuit. You may need to adjust \\( R_F \\) to optimize the gain while maintaining the desired input resistance. The relationship between \\( R_F \\) and the transconductance of the transistors will influence the overall gain.\n\n3. **Input Matching**: To maintain \\( R_{in} = 50 \\, \\Omega \\), you can use matching networks (like transformers or LC circuits) at the input. This will help ensure that the input impedance is matched to the source, minimizing reflections and maximizing power transfer.\n\n4. **Noise Optimization**: Analyze the noise contributions from each component in the circuit. The transistors will have their own noise characteristics, and minimizing their contributions (e.g., by selecting low-noise transistors) can help improve the overall NF.\n\n5. **Capacitor \\( C_1 \\)**: The coupling capacitor \\( C_1 \\) should be chosen to ensure that it does not introduce significant reactance at the operating frequency. This will help maintain the desired input impedance.\n\n6. **Simulation and Testing**: Use circuit simulation tools (like SPICE) to model the circuit and analyze the NF. Adjust component values iteratively based on simulation results to find the optimal configuration.\n\n7. **Temperature Considerations**: Ensure that the circuit operates at a stable temperature, as temperature variations can affect the noise performance of the transistors.\n\nBy carefully adjusting these parameters and components, you can optimize the circuit for NF while keeping \\( R_{in} \\) at 50 Ohms.",
        "format": "markdown",
        "sha256": "6689b058640e072e69bdedc299daf497077faeadb7c8180a59797f393cc874cc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer offers generic tuning and simulation suggestions but misses the key optimization: raise gm above 1/50 Ω and increase RF accordingly, using finite output resistance to preserve Rin and reduce NF below 1 + gamma.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36866,
        "output_tokens": 435,
        "total_tokens": 37301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36866,
        "output_tokens": 435,
        "total_tokens": 37301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the circuit for noise figure (NF) while keeping the input resistance \\( R_{in} \\) at 50 Ohms, consider the following steps:\n\n1. **Biasing of Transistors**: Ensure that the transistors \\( M_1 \\) and \\( M_2 \\) are properly biased to operate in their optimal region. This will help minimize distortion and improve overall gain.\n\n2. **Feedback Resistor \\( R_F \\)**: Adjust the value of \\( R_F \\) to optimize the gain while maintaining the desired input resistance. The feedback resistor affects both the gain and the input impedance of the circuit.\n\n3. **Input Matching Network**: Implement an input matching network (such as a transformer or LC circuit) to match the 50 Ohm input impedance to the circuit. This can help minimize reflections and improve the NF.\n\n4. **Minimize Parasitics**: Pay attention to parasitic capacitances and inductances in the layout. Use short traces and proper grounding techniques to reduce unwanted noise and improve performance.\n\n5. **Component Selection**: Choose low-noise components for \\( M_1 \\) and \\( M_2 \\). The choice of transistors can significantly impact the NF.\n\n6. **Temperature Considerations**: Ensure that the circuit operates at a stable temperature, as temperature variations can affect the noise performance of the transistors.\n\n7. **Simulation and Testing**: Use circuit simulation tools to analyze the NF and gain. Adjust component values based on simulation results to achieve the desired performance.\n\n8. **Feedback Configuration**: Consider using negative feedback to improve linearity and reduce noise. This can help in achieving a better NF while maintaining the required input resistance.\n\nBy carefully adjusting these parameters and components, you can optimize the circuit for noise figure while keeping \\( R_{in} \\) at 50 Ohms.",
        "format": "markdown",
        "sha256": "aef01aca970b92cf0b34e168cb9f4255a992f7518f7c4afe3ec2c8a78e53ce98"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives generic advice and notes that adjusting RF affects input impedance, but it misses the key optimization: increase gm above 1/50 Ω and raise RF accordingly using the finite-ro relation to keep Rin matched and reduce NF.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36866,
        "output_tokens": 377,
        "total_tokens": 37243,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36866,
        "output_tokens": 377,
        "total_tokens": 37243,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the circuit for noise figure (NF) while keeping the input resistance \\( R_{in} \\) at 50 Ohms, consider the following steps:\n\n1. **Biasing of Transistors**: Ensure that the transistors \\( M_1 \\) and \\( M_2 \\) are properly biased to operate in the saturation region. This will help maintain linearity and minimize distortion, which can contribute to noise.\n\n2. **Feedback Resistor \\( R_F \\)**: The value of \\( R_F \\) can significantly affect the gain and noise figure. A lower \\( R_F \\) can improve the NF but may reduce gain. You may need to find a balance that maintains the desired gain while optimizing NF.\n\n3. **Input Matching Network**: Design an input matching network that matches the 50 Ohm input impedance. This can be done using passive components (inductors and capacitors) to create a conjugate match at the input frequency.\n\n4. **Minimize Parasitics**: Ensure that the layout minimizes parasitic capacitances and inductances, which can degrade performance. Use short traces and proper grounding techniques.\n\n5. **Component Selection**: Choose low-noise components for \\( M_1 \\) and \\( M_2 \\). The choice of transistors can greatly influence the overall noise figure.\n\n6. **Temperature Considerations**: Since noise is temperature-dependent, ensure that the circuit operates at a stable temperature to minimize thermal noise.\n\n7. **Simulation and Testing**: Use circuit simulation tools (like SPICE) to model the circuit and analyze the NF. Adjust component values based on simulation results to achieve the desired performance.\n\n8. **Iterative Optimization**: After initial adjustments, iteratively optimize the circuit by tweaking component values and configurations based on measured NF and gain.\n\nBy following these steps, you can optimize the circuit for noise figure while maintaining the required input resistance.",
        "format": "markdown",
        "sha256": "45c789ab777028e9893470b58211661178811d08b450691fe4b017afbd9af41c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer gives generic design advice and misses the essential optimization: increase gm above 1/50 Ω and adjust RF to preserve Rin using the finite-output-resistance relation. Its suggestion that lowering RF improves NF does not establish the required match or the correct trend.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36866,
        "output_tokens": 389,
        "total_tokens": 37255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36866,
        "output_tokens": 389,
        "total_tokens": 37255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance \\( Z_{in} \\) of the given circuit, we need to analyze the components and their configurations. The circuit consists of a combination of resistors, capacitors, and MOSFETs.\n\n### Steps to Compute Input Impedance:\n\n1. **Identify the Input Node**: The input current \\( I_{in} \\) enters at node \\( P \\), which is connected to the gate of transistor \\( M_1 \\).\n\n2. **Transistor Model**: For small-signal analysis, we can use the small-signal model of the MOSFETs. The input impedance looking into the gate of a MOSFET is typically very high, often approximated as infinite for ideal cases. However, we need to consider the effect of \\( R_{in} \\) and \\( C_{in} \\).\n\n3. **Capacitor Effect**: The capacitor \\( C_{in} \\) will affect the input impedance at high frequencies. The impedance of the capacitor is given by:\n   \\[\n   Z_{C_{in}} = \\frac{1}{j\\omega C_{in}}\n   \\]\n   where \\( \\omega \\) is the angular frequency.\n\n4. **Resistor Effect**: The resistor \\( R_{in} \\) is in parallel with the input impedance of the MOSFET. Therefore, the total input impedance can be expressed as:\n   \\[\n   Z_{in} = R_{in} \\parallel Z_{M1}\n   \\]\n   where \\( Z_{M1} \\) is the input impedance looking into the gate of \\( M_1 \\).\n\n5. **Total Input Impedance**: Assuming \\( Z_{M1} \\) is very high (ideal case), the input impedance can be approximated as:\n   \\[\n   Z_{in} \\approx R_{in}\n   \\]\n   However, if we consider the effect of \\( C_{in} \\) at a specific frequency, we can express the total input impedance as:\n   \\[\n   Z_{in} = \\frac{R_{in} \\cdot Z_{C_{in}}}{R_{in} + Z_{C_{in}}}\n   \\]\n\n### Conclusion:\nThe input impedance \\( Z_{in} \\) of the circuit can be approximated as \\( R_{in} \\) for low frequencies. At higher frequencies, the impedance will be affected by \\( C_{in} \\) and can be calculated using the parallel combination of \\( R_{in} \\) and the capacitive impedance \\( Z_{C_{in}} \\). \n\nFor a more precise calculation, you would need to know the values of \\( R_{in} \\) and \\( C_{in} \\), as well as the operating frequency to determine the exact input impedance.",
        "format": "markdown",
        "sha256": "13c2b6344e0c7378babdc63f69083eb9f94536dc5f759c1ad910833db6445c98"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misses the feedback path that sets the TIA input impedance and gives no valid calculation. Treating the input as an essentially open MOS gate and adding an unspecified capacitor does not match the circuit’s Miller-theorem result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 8518,
        "output_tokens": 580,
        "total_tokens": 9098,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 8518,
        "output_tokens": 580,
        "total_tokens": 9098,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance \\( Z_{in} \\) of the given circuit, we need to analyze the components and their configurations. The circuit consists of a combination of resistors, capacitors, and MOSFETs.\n\n### Steps to Compute Input Impedance:\n\n1. **Identify the Input Node**: The input current \\( I_{in} \\) enters at node \\( P \\).\n\n2. **Consider the Capacitor**: The capacitor \\( C_{in} \\) will affect the impedance at high frequencies. Its impedance \\( Z_C \\) is given by:\n   \\[\n   Z_C = \\frac{1}{j \\omega C_{in}}\n   \\]\n   where \\( \\omega = 2 \\pi f \\) is the angular frequency.\n\n3. **Transistor Models**: The MOSFETs \\( M_1, M_2, \\) and \\( M_3 \\) can be modeled using their small-signal parameters. For small-signal analysis, we can assume:\n   - \\( M_1 \\) has a transconductance \\( g_{m1} \\) and output resistance \\( r_{o1} \\).\n   - \\( M_2 \\) and \\( M_3 \\) will also have similar parameters.\n\n4. **Calculate the Equivalent Resistance**: The input impedance looking into the gate of \\( M_1 \\) is primarily determined by \\( R_{in} \\) and the impedance looking into the source of \\( M_1 \\). The output impedance of \\( M_1 \\) will be reflected back to the input.\n\n5. **Combine Impedances**: The total input impedance \\( Z_{in} \\) can be expressed as:\n   \\[\n   Z_{in} = R_{in} + Z_C + \\text{(reflected impedance from M1)}\n   \\]\n\n6. **Reflected Impedance**: The output impedance of \\( M_1 \\) can be approximated as:\n   \\[\n   Z_{out1} = r_{o1} \\parallel R_F\n   \\]\n   This impedance will affect the input impedance through the transconductance relationship.\n\n7. **Final Expression**: The final expression for the input impedance will depend on the specific values of \\( R_{in}, R_F, r_{o1}, g_{m1}, \\) and \\( C_{in} \\).\n\n### Summary:\nThe input impedance \\( Z_{in} \\) can be computed using the above relationships, taking into account the contributions from the resistors, capacitors, and the transistors. The exact numerical value will depend on the specific parameters of the components used in the circuit.",
        "format": "markdown",
        "sha256": "0297bf74f7c31e4c93d945d722545bdd8c6c3e2180fd201afe24d1fe26d1d8bf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer does not compute the input impedance and mischaracterizes the circuit with unsupported capacitor and impedance-reflection claims. It omits the required result, \\(R_{in}=(R_F+R_{D2})/(1+A_0)\\), and the unloaded-gain definition.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2944,
        "input_tokens": 8518,
        "output_tokens": 552,
        "total_tokens": 9070,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2944,
        "input_tokens": 8518,
        "output_tokens": 552,
        "total_tokens": 9070,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance \\( Z_{in} \\) of the given circuit, we need to analyze the components and their configurations. The circuit consists of a combination of resistors, capacitors, and MOSFETs.\n\n### Steps to Compute Input Impedance:\n\n1. **Identify the Input Node**: The input current \\( I_{in} \\) enters at node \\( P \\).\n\n2. **Consider the Capacitor**: The capacitor \\( C_{in} \\) will affect the impedance at high frequencies. Its impedance \\( Z_C \\) is given by:\n   \\[\n   Z_C = \\frac{1}{j \\omega C_{in}}\n   \\]\n   where \\( \\omega \\) is the angular frequency.\n\n3. **Transistor Models**: The MOSFETs \\( M_1, M_2, \\) and \\( M_3 \\) can be modeled using their small-signal parameters. For small-signal analysis, we can use the transconductance \\( g_m \\) and output resistance \\( r_o \\) of the transistors.\n\n4. **Calculate the Output Impedance**: The output impedance seen from the drain of \\( M_3 \\) can be approximated as:\n   \\[\n   Z_{out} = R_{D2} \\parallel r_{o3}\n   \\]\n   where \\( r_{o3} \\) is the output resistance of \\( M_3 \\).\n\n5. **Feedback Effect**: The feedback resistor \\( R_F \\) will also influence the input impedance. The feedback can be modeled as a voltage divider affecting the input impedance.\n\n6. **Total Input Impedance**: The total input impedance \\( Z_{in} \\) can be expressed as:\n   \\[\n   Z_{in} = R_{in} + Z_C + \\left( \\frac{Z_{out}}{A_v} \\right)\n   \\]\n   where \\( A_v \\) is the voltage gain from the input to the output.\n\n### Final Expression:\nThe final expression for the input impedance will depend on the specific values of \\( R_{in}, R_{D1}, R_{D2}, R_F, g_m, \\) and \\( C_{in} \\). \n\n### Conclusion:\nTo compute the exact numerical value of \\( Z_{in} \\), you would need to substitute the specific values of the components and perform the calculations based on the above relationships. If you have specific values for the components, I can help you with the calculations.",
        "format": "markdown",
        "sha256": "0542b0d28863f3d6ac29681e922a673b86ca443473e72d127352c14122397541"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It does not compute the input impedance or give the required Miller result, and its proposed sum of input, capacitor, and output-impedance terms is not a valid model of the feedback circuit.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2944,
        "input_tokens": 8518,
        "output_tokens": 519,
        "total_tokens": 9037,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2944,
        "input_tokens": 8518,
        "output_tokens": 519,
        "total_tokens": 9037,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise due to thermal noise from the LDO regulator, you can follow these general steps:\n\n1. **Identify the Thermal Noise Source**: The thermal noise generated by the LDO can be characterized by its spectral density \\( S_{th} \\) (typically in \\( \\text{V}^2/\\text{Hz} \\)).\n\n2. **Determine the Transfer Function**: Establish the transfer function from the LDO output voltage noise to the VCO control voltage. This transfer function will depend on the circuit configuration, including the gain of the VCO and any filtering present in the feedback loop.\n\n3. **Calculate the Noise Contribution**: Use the transfer function to relate the thermal noise at the LDO output to the noise at the VCO input. If \\( H(f) \\) is the transfer function from the LDO output to the VCO control voltage, the noise power at the VCO input can be calculated as:\n   \\[\n   S_{vco} = H(f)^2 \\cdot S_{th}\n   \\]\n\n4. **Phase Noise Calculation**: The phase noise \\( L(f) \\) of the VCO can be derived from the voltage noise at the control input. If the VCO has a sensitivity \\( K_{vco} \\) (in radians per volt), the phase noise can be expressed as:\n   \\[\n   L(f) = 10 \\log_{10} \\left( \\frac{S_{vco}}{K_{vco}^2} \\right)\n   \\]\n   This gives you the phase noise in dBc/Hz.\n\n5. **Consider Additional Factors**: Depending on the specific circuit, you may need to account for additional factors such as the bandwidth of the VCO, the effects of other noise sources, and any filtering that may affect the noise transfer.\n\nBy following these steps, you can compute the VCO output phase noise resulting from the thermal noise generated by the LDO regulator.",
        "format": "markdown",
        "sha256": "d96056aa41466cc31d06412b6a23a784d1b85f7ec25e40a134981039f6821acd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that LDO noise reaches the VCO and mentions VCO sensitivity, but uses an incorrect inverse-sensitivity relation and omits supply-pushing conversion and the essential 1/offset-frequency² FM-to-phase dependence.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36869,
        "output_tokens": 411,
        "total_tokens": 37280,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36869,
        "output_tokens": 411,
        "total_tokens": 37280,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise due to thermal noise from the LDO regulator, you can follow these general steps:\n\n1. **Identify the Thermal Noise Source**: The thermal noise generated by the LDO can be characterized by its spectral density \\( S_{th} \\) (typically in \\( \\text{V}^2/\\text{Hz} \\)).\n\n2. **Determine the Equivalent Input Noise**: The thermal noise from the LDO will affect the VCO's control voltage \\( V_{cont} \\). You can model this noise as an equivalent voltage noise source at the input of the VCO.\n\n3. **Calculate the VCO Sensitivity**: The sensitivity of the VCO, often denoted as \\( K_{VCO} \\) (in radians per second per volt), relates the control voltage to the output frequency. This is crucial for translating the input noise into phase noise.\n\n4. **Compute the Phase Noise**: The phase noise \\( L(f) \\) at a frequency offset \\( f \\) from the carrier can be calculated using the following formula:\n\n   \\[\n   L(f) = 10 \\log_{10} \\left( \\frac{S_{th}}{K_{VCO}^2} \\right) + 10 \\log_{10}(B)\n   \\]\n\n   where \\( B \\) is the bandwidth over which the phase noise is measured.\n\n5. **Consider the VCO Nonlinearity**: If the VCO exhibits nonlinear behavior, you may need to account for this in your calculations, as it can affect the relationship between the control voltage and the output phase.\n\n6. **Combine Contributions**: If there are other noise sources in the system, you may need to combine their contributions to the overall phase noise using appropriate methods (e.g., adding in quadrature).\n\nBy following these steps, you can derive the VCO output phase noise due to the thermal noise from the LDO regulator.",
        "format": "markdown",
        "sha256": "bc73feec6173ca4fd9aedd8e5bb38c5c5c3571e3be6e1bab3b562790e8a0ecd0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that LDO voltage noise couples through VCO frequency sensitivity, but gives the wrong conversion: phase noise should scale with supply-pushing gain squared and fall as 1/Δf². The proposed formula instead inverts KVCO and omits the offset-frequency dependence.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36869,
        "output_tokens": 402,
        "total_tokens": 37271,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36869,
        "output_tokens": 402,
        "total_tokens": 37271,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise due to thermal noise from the LDO regulator, you can follow these general steps:\n\n1. **Identify the Thermal Noise Source**: The thermal noise generated by the LDO can be characterized by its spectral density \\( S_{th} \\) (typically in \\( \\text{V}^2/\\text{Hz} \\)).\n\n2. **Determine the Equivalent Input Noise**: The thermal noise from the LDO will be coupled into the VCO. You need to find the equivalent input noise voltage at the VCO input due to the LDO noise. This can be done using the transfer function of the circuit from the LDO output to the VCO input.\n\n3. **Calculate the Transfer Function**: The transfer function \\( H(f) \\) from the LDO output to the VCO input can be derived based on the circuit topology. This typically involves analyzing the small-signal model of the VCO and the surrounding components.\n\n4. **Compute the Input Noise Voltage**: The input noise voltage \\( V_{n, \\text{in}} \\) at the VCO input due to the LDO thermal noise can be calculated as:\n   \\[\n   V_{n, \\text{in}} = \\sqrt{S_{th} \\cdot |H(f)|^2}\n   \\]\n   where \\( |H(f)| \\) is the magnitude of the transfer function evaluated at the frequency of interest.\n\n5. **Determine the Phase Noise**: The phase noise \\( L(f) \\) of the VCO can be related to the input noise voltage using the following relationship:\n   \\[\n   L(f) = 10 \\log_{10} \\left( \\frac{V_{n, \\text{in}}^2}{(2\\pi f)^2} \\right)\n   \\]\n   This equation relates the input noise voltage to the phase noise in dBc/Hz.\n\n6. **Consider Other Noise Sources**: If there are other noise sources in the system (e.g., flicker noise, shot noise), they should also be included in the overall phase noise calculation.\n\nBy following these steps, you can compute the VCO output phase noise resulting from the thermal noise generated by the LDO regulator.",
        "format": "markdown",
        "sha256": "3330fa21c7f9f8c1cb1635bfb7ff66715d0b8c75f7e04df27ae9f21e502337c9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that LDO noise couples into the VCO, but misses the essential supply-pushing sensitivity: the noise must be converted to frequency noise using df/dVout and then to phase noise with a 1/Δf² dependence. Its proposed voltage-noise-to-phase formula omits this conversion and is not valid here.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36869,
        "output_tokens": 466,
        "total_tokens": 37335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36869,
        "output_tokens": 466,
        "total_tokens": 37335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor \\( C_T \\) to the tail node in the circuit can have a significant impact on phase noise. Here’s how it generally affects the system:\n\n1. **Increased Capacitance**: The addition of \\( C_T \\) increases the total capacitance at the tail node. This can help to stabilize the voltage at that node, reducing fluctuations that contribute to phase noise.\n\n2. **Reduced Noise Sensitivity**: With a larger capacitance, the circuit becomes less sensitive to noise sources, as the capacitor can filter out high-frequency noise. This can lead to a reduction in phase noise.\n\n3. **Improved Phase Margin**: The added capacitance can improve the phase margin of the oscillator circuit, which can enhance stability and reduce the likelihood of oscillation frequency drift.\n\n4. **Lower Frequency Response**: The presence of \\( C_T \\) can also lower the cutoff frequency of the circuit, which may help in filtering out unwanted high-frequency noise components.\n\nOverall, adding \\( C_T \\) to the tail node typically results in reduced phase noise, leading to improved performance of the oscillator or circuit in question. However, the exact impact can depend on the specific circuit configuration and parameters.",
        "format": "markdown",
        "sha256": "893b6a59403c254461684bd5f98310f0757df93418fd1ae0e64797bbef1688cc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims CT typically reduces phase noise through filtering, a monotonic-improvement conclusion that misses the nonmonotonic effect and the class-C, flicker-upconversion, and large-CT instability mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25528,
        "output_tokens": 245,
        "total_tokens": 25773,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25528,
        "output_tokens": 245,
        "total_tokens": 25773,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor \\( C_T \\) to the tail node in the circuit can have a significant impact on phase noise. Here’s how it generally affects the system:\n\n1. **Noise Filtering**: The capacitor acts as a low-pass filter, which can help reduce high-frequency noise. This can lead to a decrease in phase noise, particularly at higher frequencies.\n\n2. **Stability Improvement**: By providing a more stable voltage at the tail node, \\( C_T \\) can improve the overall stability of the circuit. This stability can help reduce fluctuations that contribute to phase noise.\n\n3. **Increased Capacitance**: If \\( C_T \\) is sufficiently large, it can dominate the impedance at the tail node, further smoothing out variations in current and voltage, which can also contribute to lower phase noise.\n\n4. **Impact on Frequency Response**: The addition of \\( C_T \\) can alter the frequency response of the circuit, potentially shifting the resonant frequency or affecting the bandwidth, which can also influence phase noise characteristics.\n\nIn summary, adding \\( C_T \\) to the tail node typically reduces phase noise by filtering out high-frequency noise and improving voltage stability, but the exact impact will depend on the specific circuit parameters and operating conditions.",
        "format": "markdown",
        "sha256": "7e3725e1cfa593375c905bb3f9fefac211a5590d227ec87c52da9096b5c653bc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It claims CT typically reduces phase noise through filtering and tail-node stabilization, missing the nonmonotonic effect and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25528,
        "output_tokens": 253,
        "total_tokens": 25781,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 25528,
        "output_tokens": 253,
        "total_tokens": 25781,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor \\( C_T \\) to the tail node in a circuit like the one shown typically affects the phase noise characteristics of the oscillator. Here’s how it generally impacts phase noise:\n\n1. **Increased Capacitance**: The addition of \\( C_T \\) increases the total capacitance at the tail node, which can help to stabilize the voltage at that node. This stabilization can reduce the sensitivity of the oscillator to noise.\n\n2. **Phase Noise Reduction**: By providing a low impedance path for high-frequency noise, \\( C_T \\) can help filter out some of the noise that would otherwise contribute to phase jitter. This can lead to a reduction in phase noise.\n\n3. **Frequency Stability**: The increased capacitance can also improve frequency stability by reducing the impact of variations in the supply voltage or other noise sources.\n\n4. **Trade-offs**: While adding \\( C_T \\) can reduce phase noise, it may also introduce other effects, such as increased power consumption or changes in the oscillation frequency, depending on the circuit design.\n\nIn summary, adding \\( C_T \\) to the tail node generally helps to reduce phase noise by stabilizing the voltage and filtering out high-frequency noise, but it’s essential to consider the overall impact on the circuit's performance.",
        "format": "markdown",
        "sha256": "c1b5ab717c7d1b0692ba5a82e0fa1e9e5cf80800c6557aa364e92b7d30e6af07"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Claims CT generally reduces phase noise through filtering and tail-node stabilization, missing the nonmonotonic effect and its class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25528,
        "output_tokens": 261,
        "total_tokens": 25789,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 19840,
        "input_tokens": 25528,
        "output_tokens": 261,
        "total_tokens": 25789,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To estimate the oscillation frequency of the circuit shown, we need to analyze the components involved, particularly the inductors and capacitors.\n\n1. **Identify Components**: The circuit appears to have inductors \\(X_1\\), \\(Y_1\\), \\(X_2\\), and \\(Y_2\\). The oscillation frequency will depend on the values of these inductors and any capacitors present in the circuit.\n\n2. **Basic Oscillation Frequency Formula**: For a simple LC oscillator, the oscillation frequency \\(f\\) can be estimated using the formula:\n   \\[\n   f = \\frac{1}{2\\pi\\sqrt{LC}}\n   \\]\n   where \\(L\\) is the inductance and \\(C\\) is the capacitance.\n\n3. **Assumptions**: If we assume that the inductors \\(X_1\\) and \\(Y_1\\) are in series and \\(X_2\\) and \\(Y_2\\) are in series, we can combine their inductances. If there are capacitors in parallel or series with these inductors, we would need their values as well.\n\n4. **Example Calculation**: \n   - Let’s assume \\(L\\) is the total inductance of the circuit and \\(C\\) is the total capacitance.\n   - If \\(L = 1 \\, \\text{H}\\) and \\(C = 1 \\, \\mu\\text{F}\\), then:\n   \\[\n   f = \\frac{1}{2\\pi\\sqrt{1 \\times 10^{-6}}} \\approx 159.15 \\, \\text{Hz}\n   \\]\n\n5. **Final Steps**: To get an accurate frequency, you would need the actual values of the inductors and capacitors in the circuit. Substitute those values into the formula to find the oscillation frequency.\n\nIf you provide specific values for the inductors and capacitors, I can help you calculate the exact frequency.",
        "format": "markdown",
        "sha256": "a58e75423cf591c4356f3783ae053f37b2dbe0d1a4df27d889f28f082cb00ce4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives only the ideal LC tank resonance and omits the essential coupling-induced frequency shift. The speculative series-inductor assumptions and example values do not estimate this circuit’s oscillation frequency.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36854,
        "output_tokens": 416,
        "total_tokens": 37270,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36854,
        "output_tokens": 416,
        "total_tokens": 37270,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To estimate the oscillation frequency of the circuit shown, we need to analyze the components involved, particularly the inductors and capacitors, as they determine the resonant frequency.\n\n### General Formula for Oscillation Frequency\n\nFor an LC circuit, the oscillation frequency \\( f \\) can be calculated using the formula:\n\n\\[\nf = \\frac{1}{2\\pi\\sqrt{LC}}\n\\]\n\nwhere:\n- \\( L \\) is the inductance,\n- \\( C \\) is the capacitance.\n\n### Steps to Estimate the Frequency\n\n1. **Identify the Inductance and Capacitance**: \n   - Determine the values of the inductors \\( X_1, Y_1, X_2, Y_2 \\) and any capacitors present in the circuit. If they are not labeled, you may need to refer to the specifications or context of the circuit.\n\n2. **Calculate the Total Inductance**: \n   - If the inductors are in series, sum their values:\n     \\[\n     L_{\\text{total}} = L_1 + L_2 + \\ldots\n     \\]\n   - If they are in parallel, use:\n     \\[\n     \\frac{1}{L_{\\text{total}}} = \\frac{1}{L_1} + \\frac{1}{L_2} + \\ldots\n     \\]\n\n3. **Calculate the Total Capacitance**: \n   - For capacitors in series:\n     \\[\n     \\frac{1}{C_{\\text{total}}} = \\frac{1}{C_1} + \\frac{1}{C_2} + \\ldots\n     \\]\n   - For capacitors in parallel:\n     \\[\n     C_{\\text{total}} = C_1 + C_2 + \\ldots\n     \\]\n\n4. **Substitute into the Frequency Formula**: \n   - Once you have \\( L_{\\text{total}} \\) and \\( C_{\\text{total}} \\), substitute these values into the frequency formula to find \\( f \\).\n\n### Example Calculation\n\nAssuming:\n- \\( L_1 = L_2 = 10 \\, \\text{mH} \\) (in series)\n- \\( C = 100 \\, \\mu\\text{F} \\)\n\n1. Calculate total inductance:\n   \\[\n   L_{\\text{total}} = 10 \\, \\text{mH} + 10 \\, \\text{mH} = 20 \\, \\text{mH} = 0.02 \\, \\text{H}\n   \\]\n\n2. Use the capacitance:\n   \\[\n   C_{\\text{total}} = 100 \\, \\mu\\text{F} = 100 \\times 10^{-6} \\, \\text{F} = 0.0001 \\, \\text{F}\n   \\]\n\n3. Calculate frequency:\n   \\[\n   f = \\frac{1}{2\\pi\\sqrt{0.02 \\times 0.0001}} \\approx \\frac{1}{2\\pi\\sqrt{0.000002}} \\approx \\frac{1}{2\\pi \\times 0.001414} \\approx 112.9 \\, \\text{Hz}\n   \\]\n\n### Conclusion\n\nTo estimate the oscillation frequency accurately, you need the specific values of the inductors and capacitors in your circuit. Once you have those, you can apply the steps outlined above to find the frequency.",
        "format": "markdown",
        "sha256": "c2e031d9298e999214f8c515d6c3fe6684292bbec6cfdb8ff4125191cf184f2c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives the basic LC tank resonance, but misses the essential coupling-induced frequency shift that determines the estimate for this oscillator. The invented component values and example do not address the circuit.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36854,
        "output_tokens": 741,
        "total_tokens": 37595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 31232,
        "input_tokens": 36854,
        "output_tokens": 741,
        "total_tokens": 37595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "openai/gpt-4o-mini-2024-07-18",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To estimate the oscillation frequency of the circuit shown, we need to analyze the components involved, particularly the inductors and capacitors.\n\n1. **Identify Components**: The circuit appears to have inductors \\(X_1\\), \\(Y_1\\), \\(X_2\\), and \\(Y_2\\). The oscillation frequency will depend on the values of these inductors and any capacitors present in the circuit.\n\n2. **Basic Formula**: The oscillation frequency \\(f\\) for an LC circuit (inductor-capacitor circuit) can be estimated using the formula:\n   \\[\n   f = \\frac{1}{2\\pi\\sqrt{LC}}\n   \\]\n   where \\(L\\) is the inductance and \\(C\\) is the capacitance.\n\n3. **Assumptions**: If we assume that the inductors are in series or parallel configurations, we can calculate the equivalent inductance \\(L_{eq}\\). Similarly, if there are capacitors in the circuit, we can find the equivalent capacitance \\(C_{eq}\\).\n\n4. **Example Calculation**:\n   - If \\(L_1\\) and \\(L_2\\) are the inductances of \\(X_1\\) and \\(X_2\\), and \\(C\\) is the capacitance:\n     - For series inductors: \n       \\[\n       L_{eq} = L_1 + L_2\n       \\]\n     - For parallel inductors:\n       \\[\n       \\frac{1}{L_{eq}} = \\frac{1}{L_1} + \\frac{1}{L_2}\n       \\]\n   - If \\(C\\) is the capacitance in the circuit, substitute \\(L_{eq}\\) and \\(C\\) into the frequency formula.\n\n5. **Final Frequency**: Once you have \\(L_{eq}\\) and \\(C_{eq}\\), plug those values into the frequency formula to find the oscillation frequency.\n\nIf you provide specific values for the inductances and capacitances, I can help you calculate the exact frequency.",
        "format": "markdown",
        "sha256": "0e62601371e38d1e1b69f069e09c404d9ab9e39177a46c1b2edc3441afe63ccf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the tank’s basic LC resonance, but gives only a generic formula and misses the essential coupling-induced frequency shift. Its speculative series/parallel inductor combinations do not provide a circuit-specific estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36854,
        "output_tokens": 436,
        "total_tokens": 37290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 36854,
        "output_tokens": 436,
        "total_tokens": 37290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
