{
  "model_key": "gpt_5",
  "display_name": "GPT-5",
  "provider": "openai",
  "evaluation_model_ids": [],
  "thinking_effort": "high",
  "configuration_note": "GPT-5 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (openai/gpt-5) at reasoning effort high, the highest it offers. Requests set max_tokens to 128,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for GPT-5 on 2026-11-10 ($1.25 input, $0.125 cached input, $10.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 57,
          "incorrect_count": 93,
          "partial_credit_count": 58,
          "zero_count": 35,
          "mean_score_0_to_4": 2.1333333333333333,
          "score_percent": 53.333333333333336,
          "score_distribution": {
            "0": 35,
            "1": 33,
            "2": 16,
            "3": 9,
            "4": 57
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 57,
          "incorrect_count": 93,
          "partial_credit_count": 58,
          "zero_count": 35,
          "mean_score_0_to_4": 2.1333333333333333,
          "score_percent": 53.333333333333336,
          "score_distribution": {
            "0": 35,
            "1": 33,
            "2": 16,
            "3": 9,
            "4": 57
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 40,
          "incorrect_count": 50,
          "partial_credit_count": 21,
          "zero_count": 29,
          "mean_score_0_to_4": 2.1444444444444444,
          "score_percent": 53.61111111111111,
          "score_distribution": {
            "0": 29,
            "1": 13,
            "2": 4,
            "3": 4,
            "4": 40
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 40,
          "incorrect_count": 50,
          "partial_credit_count": 21,
          "zero_count": 29,
          "mean_score_0_to_4": 2.1444444444444444,
          "score_percent": 53.61111111111111,
          "score_distribution": {
            "0": 29,
            "1": 13,
            "2": 4,
            "3": 4,
            "4": 40
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 17,
          "incorrect_count": 43,
          "partial_credit_count": 37,
          "zero_count": 6,
          "mean_score_0_to_4": 2.1166666666666667,
          "score_percent": 52.916666666666664,
          "score_distribution": {
            "0": 6,
            "1": 20,
            "2": 12,
            "3": 5,
            "4": 17
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 17,
          "incorrect_count": 43,
          "partial_credit_count": 37,
          "zero_count": 6,
          "mean_score_0_to_4": 2.1166666666666667,
          "score_percent": 52.916666666666664,
          "score_distribution": {
            "0": 6,
            "1": 20,
            "2": 12,
            "3": 5,
            "4": 17
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 20,
        "incorrect_count": 30,
        "partial_credit_count": 17,
        "zero_count": 13,
        "mean_score_0_to_4": 2.06,
        "score_percent": 51.5,
        "score_distribution": {
          "0": 13,
          "1": 12,
          "2": 4,
          "3": 1,
          "4": 20
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 17,
        "incorrect_count": 33,
        "partial_credit_count": 24,
        "zero_count": 9,
        "mean_score_0_to_4": 2.2,
        "score_percent": 55.00000000000001,
        "score_distribution": {
          "0": 9,
          "1": 11,
          "2": 8,
          "3": 5,
          "4": 17
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 20,
        "incorrect_count": 30,
        "partial_credit_count": 17,
        "zero_count": 13,
        "mean_score_0_to_4": 2.14,
        "score_percent": 53.5,
        "score_distribution": {
          "0": 13,
          "1": 10,
          "2": 4,
          "3": 3,
          "4": 20
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 5760,
        "input_tokens": 110061,
        "output_tokens": 1333125,
        "total_tokens": 1443186
      },
      "known_totals": {
        "cached_input_tokens": 5760,
        "input_tokens": 110061,
        "output_tokens": 1333125,
        "total_tokens": 1443186
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 15,
          "incorrect_count": 15,
          "partial_credit_count": 5,
          "zero_count": 10,
          "mean_score_0_to_4": 2.2,
          "score_percent": 55.00000000000001,
          "score_distribution": {
            "0": 10,
            "1": 4,
            "2": 1,
            "4": 15
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 11,
          "incorrect_count": 19,
          "partial_credit_count": 11,
          "zero_count": 8,
          "mean_score_0_to_4": 2.1333333333333333,
          "score_percent": 53.333333333333336,
          "score_distribution": {
            "0": 8,
            "1": 5,
            "2": 3,
            "3": 3,
            "4": 11
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 14,
          "incorrect_count": 16,
          "partial_credit_count": 5,
          "zero_count": 11,
          "mean_score_0_to_4": 2.1,
          "score_percent": 52.5,
          "score_distribution": {
            "0": 11,
            "1": 4,
            "3": 1,
            "4": 14
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 5,
          "incorrect_count": 15,
          "partial_credit_count": 12,
          "zero_count": 3,
          "mean_score_0_to_4": 1.85,
          "score_percent": 46.25,
          "score_distribution": {
            "0": 3,
            "1": 8,
            "2": 3,
            "3": 1,
            "4": 5
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 6,
          "incorrect_count": 14,
          "partial_credit_count": 13,
          "zero_count": 1,
          "mean_score_0_to_4": 2.3,
          "score_percent": 57.49999999999999,
          "score_distribution": {
            "0": 1,
            "1": 6,
            "2": 5,
            "3": 2,
            "4": 6
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 6,
          "incorrect_count": 14,
          "partial_credit_count": 12,
          "zero_count": 2,
          "mean_score_0_to_4": 2.2,
          "score_percent": 55.00000000000001,
          "score_distribution": {
            "0": 2,
            "1": 6,
            "2": 4,
            "3": 2,
            "4": 6
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It roughly doubles.\n\nReason: Intrinsic gain Ai = gm·ro. If you scale W and L by the same factor, W/L stays the same, so gm is essentially unchanged (for the same inversion level/bias). Meanwhile ro ≈ 1/(λId) with λ ∝ 1/L, so ro scales ∝ L. Doubling L therefore doubles ro, and hence Ai ≈ 2×. Note: In short-channel devices, nonideal effects (DIBL, velocity saturation) may make the increase less than 2×.",
        "format": "markdown",
        "sha256": "b2dcc0f62c7387ff7b714eda876411005bcb4119ba405ae748f463dabfcb1d16"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling W and L preserves W/L and approximately preserves gm and bias current, while the longer channel increases ro, so intrinsic gain roughly doubles.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2879,
        "total_tokens": 2905,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2752,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2879,
        "total_tokens": 2905,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2752,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It approximately doubles.\n\nReason: Intrinsic gain Av0 = gm·ro. In long‑channel operation,\n- gm ∝ W/L, so doubling W and L keeps gm unchanged (W/L is constant).\n- ro ≈ 1/(λ Id) with λ ∝ 1/L, so doubling L halves λ and thus doubles ro (for the same bias/Id).\n\nTherefore Av0 ≈ gm·ro ∝ L, so doubling L (even if W also doubles) doubles the intrinsic gain. In short‑channel devices the increase is typically less than 2× due to velocity saturation and DIBL, but W still has little effect.",
        "format": "markdown",
        "sha256": "4e6e4fd85dc46eabb2b0a06bf19d844fe34d78b5f6f300f26061a9701771cc58"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: doubling W and L keeps W/L, and thus gm, approximately unchanged while the longer channel increases ro. The short-channel caveat does not alter the central answer.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3507,
        "total_tokens": 3533,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3507,
        "total_tokens": 3533,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Approximately doubles.\n\nReason: Intrinsic gain A_i = gm·ro. Doubling W and L keeps W/L the same, so gm stays about the same for a given bias, while ro ≈ 1/(λ·ID) with λ ∝ 1/L, so ro scales ~L. Hence A_i ∝ L, and doubling L gives ~2× gain. Width changes don’t affect intrinsic gain directly (they mainly set current). In short-channel devices the increase may be less than 2× due to non-ideal effects.",
        "format": "markdown",
        "sha256": "f9352771622ecec116c606b56941cb48cd6fc8d060c75d007c3bc10ee753e847"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that doubling both dimensions preserves W/L and approximately preserves gm and drain current at fixed overdrive, while the longer channel increases ro, so intrinsic gain approximately doubles. The short-channel caveat is also reasonable.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2716,
        "total_tokens": 2742,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2716,
        "total_tokens": 2742,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both, depending on what you hold constant.\n\n- If device parameters are fixed and you vary VGS (so Id changes), then in long-channel saturation Id = (1/2)k(W/L)Vov^2, so gm = dId/dVGS = k(W/L)Vov. gm increases with Vov. Student A is right in this sense.\n\n- If the drain current Id is held fixed (common in design; you change W/L to change Vov), then gm = 2Id/Vov. gm decreases as Vov increases. Student B is right in this sense.\n\nNote: In short-channel/velocity-saturated devices, gm tends to flatten with Vov due to mobility degradation, so the “gm rises with Vov” picture is even less accurate at high fields.",
        "format": "markdown",
        "sha256": "111bee0f741503061ca9f1a5a34a1902a8295969d6c4a920f3c3540cd1a585c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that for a fixed device size, gm increases with Vov, while it decreases if Id is held fixed and W/L is changed. The short-channel caveat is secondary and does not undermine the main answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2139,
        "total_tokens": 2177,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2139,
        "total_tokens": 2177,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be correct—it depends on what you hold constant.\n\n- If you raise Vov by increasing VGS (same device, same VDS in saturation), the square-law model gives Id = (1/2)k(Vov)^2, so gm = ∂Id/∂VGS = k Vov. gm increases with Vov → Student A is correct.\n\n- If you compare operating points at the same drain current (common in analog biasing), gm = 2 Id / Vov, so increasing Vov lowers gm → Student B is correct.\n\nNote: In short-channel/velocity-saturation, gm tends to flatten with Vov, but the fixed-current result (gm/Id decreases as Vov increases) still holds.",
        "format": "markdown",
        "sha256": "b9f98bdfa07365c663507e66bf1c96637ccdf8023fb91aefbc424d6058297363"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size and explains that increasing Vov raises Id and gm. The fixed-Id condition under which Student B is right is also accurately noted.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2808,
        "total_tokens": 2846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2808,
        "total_tokens": 2846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be correct—it depends on what you hold constant.\n\n- For a given device in saturation (long-channel, no mobility reduction), Id ≈ (1/2)kVov^2, so gm = ∂Id/∂Vgs = kVov = 2Id/Vov. If you increase Vov by raising VGS (so Id also rises), gm increases with Vov. This matches Student A.\n\n- If you compare bias points at the same drain current (the gm/Id view), gm = 2Id/Vov, so increasing Vov lowers gm. This matches Student B.\n\nNote: In short-channel devices with velocity saturation, gm tends to level off at high Vov, but gm/Id still decreases with Vov.",
        "format": "markdown",
        "sha256": "2af74c774e9b3169880ea634e2efa80050aad1f6f19a3ed44ba8b2623efe6859"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly distinguishes the fixed-device case, where gm increases with Vov, from the fixed-Id case, where gm decreases. The short-channel caveat does not contradict the stated long-channel result.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2110,
        "total_tokens": 2148,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2110,
        "total_tokens": 2148,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: In form, yes.\n\n- The small‑signal (hybrid‑π) model of a PMOS has the same topology and elements as an NMOS: gm, gmb, ro (and the same intrinsic capacitances Cgs, Cgd, etc.).\n- The only difference is sign conventions. If you define PMOS voltages as v_sg, v_sd, v_sb and point the controlled current source from source to drain, the equations are identical to the NMOS case written with v_gs, v_ds, v_bs.\n- If you insist on using v_gs, v_ds, v_bs and define drain current positive into the drain, the PMOS controlled sources pick up minus signs (e.g., i_d = −gm v_gs − gmb v_bs − gds v_ds).\n- Numerical parameter values can differ (e.g., gm typically smaller for PMOS due to lower hole mobility), but the small‑signal model structure is the same.",
        "format": "markdown",
        "sha256": "3f02f6984296dfeecba98f195f028c8caca08549998e01a7f3421954f54358aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model is the same in form as the NMOS model, with sign conventions reversed; this meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3176,
        "total_tokens": 3202,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2944,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3176,
        "total_tokens": 3202,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2944,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: In topology, yes; in polarity, no.\n\n- The small-signal MOSFET model (gm, gmb, ro in parallel with the capacitances Cgs, Cgd, etc.) is the same for PMOS and NMOS.\n- The only differences are sign/polarity conventions and parameter values:\n  - For PMOS, use v_sg and v_sd (instead of v_gs and v_ds) or equivalently reverse the direction of the dependent current source; with that, the equations look identical.\n  - If you insist on using v_gs and v_ds for a PMOS, gm and gmb appear with a negative sign.\n  - Parameter magnitudes differ (e.g., μp < μn, so for the same geometry and bias, PMOS typically has smaller gm).\n  - The body diode orientation is reversed.\n\nExample:\n- NMOS: i_d = gm·v_gs + gmb·v_bs + gds·v_ds\n- PMOS (using source-referenced voltages): i_d = gm·v_sg + gmb·v_sb + gds·v_sd\n\nSo, the model is identical in structure; just handle the polarities (or signs) appropriately.",
        "format": "markdown",
        "sha256": "bd25b14d05da917739adcb1b6d1758fd1f93389850e2c7df0493d18446e8035c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS model has the same small-signal structure as the NMOS model, with polarity and sign conventions handled consistently.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3566,
        "total_tokens": 3592,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3264,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3566,
        "total_tokens": 3592,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3264,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—topologically the small-signal model is the same. The same elements appear (gm, gmb, ro), with the same magnitude formulas:\n- gm ≈ 2ID / Vov\n- ro ≈ 1/(λ ID)\n- gmb ≈ η gm\nBut you must reverse polarities for a PMOS:\n- Use VSG, VSD, VSB instead of VGS, VDS, VBS.\n- The controlled current source direction is reversed relative to the NMOS if you keep the same current reference.\n- Numerically, parameters can differ (μp < μn, so for the same bias and W/L a PMOS typically has smaller gm).\n\nIn practice: redraw the PMOS “upside down” (source at higher potential) and replace VGS by VSG, etc.; the small-signal model is otherwise identical.",
        "format": "markdown",
        "sha256": "d06002e09bea78a1ab7389d2f8e8b8fead8faf368b95635c81d5efa038add990"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says the PMOS small-signal model has the same form, with polarity and current-source direction reversed; the added parameter caveats are consistent.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3000,
        "total_tokens": 3026,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2752,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3000,
        "total_tokens": 3026,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2752,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M1 is an nMOS with gate and drain shorted (diode‑connected).  \nThus VGS = VDS = VX and the port current IX is the drain current.\n\n- VX ≤ 0: the channel is off. For sufficiently negative VX (≈ −0.6…−0.7 V) the body diode from bulk (0 V) to drain conducts, giving a negative, exponential current (IX < 0). Otherwise IX ≈ 0.\n- 0 < VX < VT: device still off (neglecting subthreshold), IX ≈ 0.\n- VX ≥ VT: the device is always in saturation since VDS = VGS, so\n  IX ≈ (1/2) β (VX − VT)^2 [≈ (1/2) β (VX − VT)^2 (1 + λVX) if channel‑length modulation is included],\n  where β = μnCox(W/L).\n\nSketch: near VX = 0 the current is ~0, then for VX > VT it rises quadratically; for sufficiently negative VX it goes negative due to the forward body‑diode.",
        "format": "markdown",
        "sha256": "2de7e8421533777d23270596526e9b1eac8ed8dedc09879ac785a5c5611e56ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, near-zero current below threshold, and quadratic rise above threshold. The additional negative-voltage body-diode behavior is also consistent with the solution and is not required.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 927,
        "output_tokens": 5352,
        "total_tokens": 6279,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 927,
        "output_tokens": 5352,
        "total_tokens": 6279,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Interpretation: M1 is an NMOS with gate and drain shorted (diode‑connected), source and body at ground. The terminal seen by Vx is the gate/drain node. Current Ix is defined flowing from the source Vx into the NMOS (arrow to the left).\n\nI–V of the one‑port:\n\n- Vx < about −0.6…−0.7 V: the body diode (p‑body to n+ drain) is forward biased. Current flows from ground into the node, i.e., opposite the Ix arrow → Ix is large negative (diode‑like exponential).\n- −0.7 V ≤ Vx < VTN: both the MOSFET and body diode are off (neglect subthreshold) → Ix ≈ 0.\n- Vx ≥ VTN: the device is always in saturation because VDS = VGS = Vx. Hence\n  Ix ≈ (β/2)(Vx − VTN)^2, optionally with channel‑length modulation: Ix ≈ (β/2)(Vx − VTN)^2(1 + λVx),\n  where β = μnCox(W/L).\n\nSketch: start near zero current for Vx below VTN, then a quadratic rise for Vx > VTN. For sufficiently negative Vx the curve goes into the negative‑current quadrant due to the body diode.",
        "format": "markdown",
        "sha256": "b749331974d23547bcb26a292a65715995579c3026ae7b21fcce783a84917159"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold and a quadratic rise above threshold in saturation. The additional negative-voltage body-diode behavior is consistent and not required.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 927,
        "output_tokens": 4170,
        "total_tokens": 5097,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 927,
        "output_tokens": 4170,
        "total_tokens": 5097,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Key points:\n- M1 is an nMOS with gate and drain shorted (“diode–connected”), source at ground. Hence Vgs = Vds = Vx and Ix is the drain current.\n- For Vx > VTN, the device is always in saturation (since Vds ≥ Vgs − VTN holds automatically), so\n  Ix ≈ (1/2) kn (W/L) (Vx − VTN)^2  (positive current, increasing quadratically with Vx).\n- For 0 ≤ Vx < VTN, the MOS is off (ignoring subthreshold), so Ix ≈ 0.\n- For Vx < 0, the intrinsic body diode (anode at source, cathode at drain) becomes forward biased; Ix is negative and rises exponentially with |Vx| (about zero near 0 V and large in magnitude for Vx ≲ −0.6…−0.7 V).\n\nSketch description:\n- Along the positive Vx axis, Ix is 0 up to VTN, then a quadratic curve starting at VTN.\n- Around Vx = 0, current is ~0.\n- For negative Vx, Ix goes negative following a diode-like exponential.",
        "format": "markdown",
        "sha256": "334da6474c3c78de477e8f1abaed34d9ea4c2feb907132af88aadd7970158111"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its near-zero current below threshold, and the quadratic saturation current above threshold. The negative-Vx body-diode note is secondary and does not affect the score.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 927,
        "output_tokens": 5988,
        "total_tokens": 6915,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 927,
        "output_tokens": 5988,
        "total_tokens": 6915,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let M1 be an nMOS with source and body at ground. Then\nVGS = VX and VDS = 1 V (drain tied to a 1 V supply). Ignoring channel‑length modulation:\n\n- For VX ≤ Vth: device off ⇒ IX ≈ 0.\n- For Vth < VX ≤ Vth + 1 V: saturation since VDS ≥ VGS − Vth ⇒\n  IX = (β/2)(VX − Vth)^2.\n- For VX ≥ Vth + 1 V: triode since VDS < VGS − Vth ⇒\n  IX = β[(VX − Vth)·1 − (1^2)/2] = β(VX − Vth − 1/2).\n\nThus the IX–VX sketch is:\nzero up to VX = Vth; a rising parabola from Vth to Vth + 1; and for VX > Vth + 1 a straight line with slope β, starting at IX = β/2 at VX = Vth + 1.",
        "format": "markdown",
        "sha256": "1c167e2ee36811cfe46ab696ea4da0a00b06ca1d970df95bd18e2d710dee03d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions and gives the expected quadratic-to-linear IX–VX curve.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 4554,
        "total_tokens": 5482,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4288,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 4554,
        "total_tokens": 5482,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4288,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "VGS = Vx, VDS = 1 V (drain tied to +1 V, source/body at 0). Ix is the drain current (from the 1‑V source into the MOSFET).\n\nNeglecting channel‑length modulation:\n\n- Vx ≤ VTN: device off → Ix ≈ 0.\n- VTN < Vx < VTN + 1 V: saturation (since VDS ≥ VGS − VTN)  \n  Ix = 0.5 β (Vx − VTN)^2.\n- Vx ≥ VTN + 1 V: triode (linear)  \n  Ix = β [(Vx − VTN)·1 − 0.5·1^2] = β (Vx − VTN − 0.5).\n\nThus the I–V curve is: zero up to VTN, then a quadratic rise up to VTN+1 V, and beyond that a straight line with slope β.",
        "format": "markdown",
        "sha256": "fcd4b2c2f7aafd7ee62c86ca4500807f7f7afa1543f6ddcc051eb9f9b3f0bf4e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions and gives the quadratic-to-linear current trend at the correct boundary, Vx = VTN + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 4406,
        "total_tokens": 5334,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4160,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 4406,
        "total_tokens": 5334,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4160,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Key facts\n- Vd is fixed at 1 V and Vs = 0 → VDS = 1 V (constant).\n- Gate is driven by Vx → VGS = Vx.\n- Body diode is reverse biased (drain at +1 V), so current is only channel current.\n- Assume ideal square‑law MOS (no subthreshold and no channel‑length modulation).\n\nThus Ix = Id with the following Vx regions:\n\n1) Vx < VTH: transistor off → Ix ≈ 0.\n\n2) VTH ≤ Vx ≤ VTH + 1 V: saturation because VDS ≥ VGS − VTH.\n   Ix = (1/2)·k·(Vx − VTH)^2.\n\n3) Vx ≥ VTH + 1 V: triode because VDS < VGS − VTH.\n   Ix = k·[(Vx − VTH)·VDS − (VDS^2)/2] with VDS = 1 V\n      = k·(Vx − VTH − 0.5).\n\nSo the sketch: Ix is zero until Vx = VTH, then rises quadratically up to Vx = VTH + 1 V, and for larger Vx continues as a straight line with slope k, crossing the boundary value Ix = 0.5·k at Vx = VTH + 1 V.",
        "format": "markdown",
        "sha256": "85926be7661fcd49e0df2f283138175f2c9aad03e9ebfc5edcd3c23089d51f8c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the quadratic saturation-region rise from VTH to VTH + 1 V and the roughly linear triode-region rise beyond it.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 4595,
        "total_tokens": 5523,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4288,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 4595,
        "total_tokens": 5523,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4288,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—if that device is a JFET (or a depletion‑mode MOSFET) with gate tied to the source, it behaves like a current‑regulating diode. With Vgs = 0 it conducts approximately a constant current Id ≈ Idss, nearly independent of VDS once VDS ≥ |Vp| (compliance a few volts).\n\nIf instead it is an enhancement‑mode NMOS with Vth > 0, then no: with Vgs = 0 it is off (only leakage), so it cannot act as a current source.",
        "format": "markdown",
        "sha256": "65fa11fa974aabc0c79756b4375015cf29e561a06b5f75e274bd9c47307e7a8b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The figure shows a diode-connected PMOS, with gate and drain grounded; it presents low impedance (about 1/gm) and cannot act as a current source. The answer misreads the device and its connections, and claims a JFET/depletion-device version could act as one.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 369,
        "output_tokens": 5678,
        "total_tokens": 6047,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 369,
        "output_tokens": 5678,
        "total_tokens": 6047,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. With the gate and drain shorted, M1 is a diode‑connected MOSFET. Its current is\nId = (1/2)β(Vds − Vth)^2(1 + λVds) with Vgs = Vds, so the current depends strongly on the voltage at the top node. The small‑signal resistance seen into the drain is ≈ 1/(gm + gds) (small), i.e., it behaves like a nonlinear resistor to ground, not a high‑output‑resistance current source. To make a current source you would need to bias Vgs independently (e.g., a mirror/cascode), not tie gate to drain.",
        "format": "markdown",
        "sha256": "de981d3b20425df2e2cf463fc0e1dca1929789175619850838e1351d3dff833a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly concludes that the diode-connected device has low impedance and cannot act as a current source. However, it describes the impedance as seen into the drain, whereas the top current port is the PMOS source; it also never identifies M1 as PMOS. The terminal misidentification limits the score.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 369,
        "output_tokens": 5481,
        "total_tokens": 5850,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5312,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 369,
        "output_tokens": 5481,
        "total_tokens": 5850,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5312,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. With the gate and source tied to ground, an enhancement‑mode NMOS has Vgs = 0, so it is off. The drain current is only leakage and depends strongly on Vds and temperature; if the drain goes negative the body diode conducts. That’s not a usable current source (except for the trivial 0‑A case). Only a depletion‑mode/JFET device with gate shorted to source would approximate a 2‑terminal current source.",
        "format": "markdown",
        "sha256": "4e0e07de2e596fb24b856d4262c2ef6fb43b4240546fd390a6b09445538492b1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS with its gate and source grounded, so it misses that the drawn device is a diode-connected PMOS with low small-signal resistance. The golden solution explicitly assigns 0 to this reasoning.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 369,
        "output_tokens": 6594,
        "total_tokens": 6963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 369,
        "output_tokens": 6594,
        "total_tokens": 6963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: it is an NMOS source‑follower (common‑drain) whose drain is returned to VDD through RS and whose source (the output) returns to ground through RD. The device controls the current that flows from VDD → RS → M1 → RD → ground.\n\nAssumptions for analysis below: enhancement NMOS, body tied to source, ignore body effect; k = μnCox(W/L). Channel‑length modulation can be included with ro.\n\nDC (large‑signal)\n- Id = (VDD − Vd)/RS = Vout/RD\n- Vgs = Vin − Vout\n- Vds = Vd − Vout = VDD − Id(RS + RD) = VDD − Vout(1 + RS/RD)\n\nRegions\n1) Off (Vin ≤ Vth): Id ≈ 0 ⇒ Vout = 0, Vd ≈ VDD.\n2) Saturation (Vds ≥ Vgs − Vth):\n   Id = (k/2)(Vin − Vout − Vth)^2, with Id = Vout/RD.\n   Explicit transfer in this region:\n   Vin = Vth + Vout + √[2 Vout/(k RD)].\n   Boundary to triode occurs when Vds = Vgs − Vth ⇒\n   Id,B = (VDD − Vin + Vth)/RS and Vout,B = RD·Id,B.\n3) Triode (Vds ≤ Vgs − Vth):\n   Vout/RD = k{(Vin − Vout − Vth)[VDD − Vout(1 + RS/RD)]\n             − ½[VDD − Vout(1 + RS/RD)]^2}.\n   For very large Vin, M1 ≈ short and\n   Vout → VDD · RD/(RS + RD) (set by the two resistors).\n\nSmall‑signal (midband)\nLet gS = 1/RS, gD = 1/RD, gds = 1/ro, gm at the chosen bias point.\nWith VDD as AC ground, the drain sees RS.\n- Gain (Vout/Vin):\n  Av = gm·gS / [ gS(gm + gD + gds) + gD·gds ].\n  If ro → ∞: Av ≈ gm/(gm + 1/RD). For gm·RD ≫ 1, Av ≈ 1 (follower).\n- Input resistance: Rin ≈ ∞ (MOS gate).\n- Output resistance (gate AC‑grounded):\n  Rout = 1 / [ gD + (gm + gds)·gS/(gS + gds) ]  (≈ 1/(gm + 1/RD) when RS is small and ro large).\n\nKey limits\n- Vin below Vth ⇒ Vout = 0.\n- Vin very large ⇒ Vout saturates to VDD·RD/(RS + RD).\n- Increasing RS lowers gain and increases Rout because the drain is no longer at AC ground.",
        "format": "markdown",
        "sha256": "6541f3dc1263211b70925c3247c5aa7ab5b9477bac3b295f9d5b23639d454b5c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as an NMOS source follower and reverses the device/resistor connections. The actual circuit is a PMOS common-source stage with source degeneration and an inverting gain.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 924,
        "output_tokens": 15118,
        "total_tokens": 16042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 924,
        "output_tokens": 15118,
        "total_tokens": 16042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What it is\n- NMOS stage with the output taken at the drain.  \n- The source is returned to VDD through RS (un-bypassed), the drain is returned to ground through RD.  \n- Hence it is a common‑source amplifier with source degeneration.\n\nDC (large‑signal)\nLet ID be the drain current (positive from drain to source).\n\nNode voltages\n- VD = ID RD = Vout\n- VS = VDD − ID RS\n- VGS = Vin − VS\n- VDS = VD − VS\n\nRegions\n- Cutoff: Vin ≤ VS + VTH → ID = 0, VD = 0, VS = VDD.\n- Saturation (typical bias): ID ≃ (β/2)(Vin − VS − VTH)^2, with β = μn Cox(W/L).  \n  Use VS = VDD − ID RS to solve for ID; then VD = ID RD.\n- Triode: ID = β[(Vin − VS − VTH)VDS − ½VDS^2] with VDS = VD − VS.\n\nSmall‑signal (midband)\nUse gm and ro evaluated at the bias current.\n\nVoltage gain (gate → drain)\nAv = vout/vin = − gm RD / [1 + gm RS + (RS + RD)/ro]\n\nUseful limits\n- If ro ≫ RS + RD: Av ≈ − gm RD / (1 + gm RS)\n- If RS = 0: Av ≈ − gm (RD ∥ ro)\n\nInput and output resistances\n- Rin ≈ ∞ (ignoring gate leakage).\n- Rout (with gate AC‑grounded):  \n  Rout = RD ∥ [ ro + RS(1 + gm ro) ]\n\nOperating range (to keep M1 in saturation)\n- On: Vin > VS + VTH\n- Saturation: VD − VS ≥ (Vin − VS − VTH)\n  with VD = ID RD and VS = VDD − ID RS from the DC solution above.\n\nThis captures the DC bias relations, the small‑signal gain, and the input/output resistances of the stage.",
        "format": "markdown",
        "sha256": "59e23979a093c2484674b0cdbfddbf6d4f9379407ba61be912b99b2ec0b58773"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The topology and inverting source-degenerated gain are recognized, but the answer calls M1 an NMOS; the figure is a PMOS stage, which the golden solution explicitly treats as a major error.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 924,
        "output_tokens": 18497,
        "total_tokens": 19421,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 924,
        "output_tokens": 18497,
        "total_tokens": 19421,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What the circuit is\n- One MOSFET M1 whose source is tied to VDD through RS and whose drain is tied to ground through RD. The output is taken at the drain node.\n- It is a source‑degenerated common‑source stage with a resistive load RD.\n\nLarge‑signal (DC) relations (assume an n‑MOS notation; for p‑MOS use VSG and VSD with the obvious sign changes)\n- Let I be the current through the chain VDD → RS → M1 → RD → ground.\n  I = Vout/RD = (VDD − VS)/RS\n  VS = VDD − I RS\n  Vout = I RD\n  VGS = Vin − VS = Vin − (VDD − I RS)\n  VDS = Vout − VS = I(RD + RS) − VDD\n- Operating region\n  • Cutoff: VGS ≤ Vth ⇒ I = 0, VS = VDD, Vout = 0.  \n  • Boundary between triode and saturation: VDS = VGS − Vth ⇒ I = (Vin − Vth)/RD.  \n  • Saturation (VDS ≥ VGS − Vth):\n      I ≈ (1/2) kn (VGS − Vth)^2 (1 + λVDS)\n  • Triode (VDS < VGS − Vth):\n      I ≈ kn[(VGS − Vth) VDS − ½ VDS^2]\n  With the above relations you can solve for I, then obtain VS and Vout.\n\nSmall‑signal (around a saturation bias point)\n- gm ≈ 2I/Vov with Vov = VGS − Vth; ro ≈ 1/(λI).\n- Midband voltage gain (Vout/Vin):\n  Av ≈ + gm RD / (1 + gm RS + (RS + RD)/ro)\n  ≈ + gm RD / (1 + gm RS) if ro ≫ RD, RS.\n  The plus sign means the stage is non‑inverting (raising Vin raises I and therefore Vout = I RD).\n- Input resistance Rin ≈ ∞ (MOS gate).  \n- Output resistance (gate AC‑grounded):\n  Rout ≈ RD || [ ro + (1 + gm ro) RS ]  (ro → ∞ ⇒ Rout ≈ RD).\n\nUseful limits\n- Maximum current set by the supply and resistors:\n  I ≤ VDD/(RS + RD) ⇒ Vout,max = RD·VDD/(RS + RD).\n- Keep M1 in saturation by ensuring I ≥ (Vin − Vth)/RD (from the boundary condition above).\n\nThese expressions let you compute the DC operating point, operating region, small‑signal gain, and output/input resistances for any given values of VDD, RS, RD, Vth, and the device parameters.",
        "format": "markdown",
        "sha256": "fd14b20cb049ec8ffd781c18cf75fc8db4af869f9bc583ea856d3781b7138406"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes a source-degenerated common-source topology, but uses NMOS-style reasoning and concludes the gain is positive and non-inverting. The actual PMOS stage is inverting, with gain approximately -gm RD/(1 + gm RS).",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 924,
        "output_tokens": 19854,
        "total_tokens": 20778,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 924,
        "output_tokens": 19854,
        "total_tokens": 20778,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an NMOS source follower (common‑drain) biased with a source resistor RS. The drain is at VDD, the gate is driven by Vin, and the output is the source node Vout.\n\nLarge‑signal (DC)\n- ID = Vout / RS\n- VGS = Vin − Vout\n- VDS = VDD − Vout\n\nRegion limits\n- Cutoff: Vin ≤ VTH ⇒ ID ≈ 0, Vout = 0.\n- Saturation: VDS ≥ VGS − VTH ⇒ VDD ≥ Vin − VTH ⇒ typically satisfied for Vin < VDD + VTH.\n- Triode: Vin > VDD + VTH (rare in normal operation).\n\nDC equation in saturation (including optional channel‑length modulation λ):\nVout/RS = ½ β (Vin − Vout − VTH)^2 (1 + λ (VDD − Vout)),\nβ = μnCox(W/L).\n\nIf λ ≈ 0, this has a closed‑form solution:\nVout = Vin − VTH − [√(1 + 2βRS (Vin − VTH)) − 1]/(βRS).\n\nUseful view: with ID = Vout/RS, the overdrive VOV = √(2ID/β), and\nVin ≈ Vout + VTH + VOV.\n\nSmall‑signal (about any bias point)\nLet gm = β(VGS − VTH) (≈ 2ID/VOV), ro = 1/(λID). With the body at ground, gmb may be included.\n\n- Voltage gain (gate to source):\nAv = ∂Vout/∂Vin = gm / (gm + gmb + 1/RS + 1/ro)\n≈ gm RS / (1 + gm RS) if ro ≫ RS and gmb ≈ 0.\nGain is slightly less than unity.\n\n- Input resistance: Rin ≈ ∞ at midband (limited only by gate capacitances).\n\n- Output resistance (with gate AC‑grounded):\nRout = 1 / (gm + gmb + 1/RS + 1/ro)\n≈ RS || 1/gm (if ro large, gmb small).\n\nOutput swing\n- Low limit ≈ 0 V (because of RS to ground).\n- High limit approaches VDD; in saturation Vout,max ≈ VDD − VOV. If Vin is pushed very high the device enters triode and Vout can move slightly closer to VDD.\n\nInterpretation\n- The circuit is a unity‑gain buffer with high input impedance, low/moderate output impedance, and bias set by RS. At DC, Vout tracks Vin with an offset ≈ VGS; for small signals Vout ≈ Vin (Av < 1).",
        "format": "markdown",
        "sha256": "5e33a173f7cb05f4388710747bfebcd4ceb70875c7918a4418e8027a8556112e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, sub-unity gain, including the golden expression under the stated approximations. The output-resistance analysis is also consistent.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9485,
        "total_tokens": 10129,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9485,
        "total_tokens": 10129,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Circuit type and role\n- NMOS source follower (common‑drain). Gate is the input (high Zin), drain is tied to VDD (AC ground), output is the source node. RS provides bias and also acts as the load. The circuit behaves like a unity‑gain buffer: Vout follows Vin with a roughly constant offset ≈ VGS.\n\nDC (large‑signal) analysis\n- Off: if Vin ≤ VT → M1 off, ID = 0 → Vout = 0.\n- On (usually saturation because VDD − Vout ≫ VGS − VT):\n  ID ≈ (1/2)β (Vin − Vout − VT)^2  (ignore channel‑length modulation)\n  Vout = RS · ID\n  ⇒ Solve for ID (or Vout) from:\n     ID = (1/2)β (Vin − VT − RS·ID)^2\n  A convenient explicit form (let A = (1/2)β):\n     let y = √ID → RS y^2 + y/√A + (VT − Vin) = 0\n     y = [ −1/√A + √(1/A + 4RS(Vin − VT)) ] / (2RS), ID = y^2, Vout = RS·ID\n- Approximation (strong inversion, gmRS ≫ 1):\n  Vout ≈ Vin − VGS, where VGS ≈ VT + VOV and ID ≈ Vout/RS with VOV = √(2ID/β).\n\nSmall‑signal (about a bias point)\n- Include transistor ro (channel‑length modulation) if desired; drain is AC ground.\n- Voltage gain:\n  Av = vout/vin = gm (RS || ro) / [1 + gm (RS || ro)]\n  ≈ gmRS / (1 + gmRS) if ro ≫ RS\n  → Av is slightly less than 1.\n- Input resistance: ≈ ∞ (MOS gate), limited only by leakage.\n- Output resistance (gate AC‑grounded):\n  Rout = 1 / (gm + 1/RS + 1/ro)\n  = (RS || ro) / [1 + gm (RS || ro)]\n  ≈ 1/gm if gm ≫ 1/RS, 1/ro.\n- Output swing limit: Vout cannot exceed Vin − VT (otherwise VGS < VT and the device turns off). The low swing is limited by ground and by keeping M1 in saturation (VDD − Vout > VOV).\n\nKey takeaways\n- Acts as a buffer with high input impedance, low output impedance, and gain ≈ 1.\n- Output tracks the input minus an essentially constant VGS set by the bias current through RS.",
        "format": "markdown",
        "sha256": "ebad29400b5a16117d13e7c9041ee35dcc648b426e99d8fc1dbe364d04072ead"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including the appropriate ro refinement. The additional analysis is consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 6835,
        "total_tokens": 7479,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6208,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 6835,
        "total_tokens": 7479,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6208,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an nMOS source follower (common–drain) biased by a source resistor RS.  \nDrain is tied to VDD (ac ground), the output is the source node.\n\nDC/large‑signal relations\n- VS = Vout\n- VGS = Vin − Vout\n- VDS = VDD − Vout\n- KCL at the output node: ID = Vout / RS\n- Device is OFF if Vin ≤ VT ⇒ Vout = 0.\n- For normal operation the device is ON and (for any practical Vin ≤ VDD) it is in saturation because\n  VDS ≥ VGS − VT ⇔ VDD ≥ Vin − VT, which is always true if Vin ≤ VDD.\n- Saturation current (including channel‑length modulation λ if desired):\n  ID = (β/2)(VGS − VT)²(1 + λVDS), β = μnCox(W/L).\n  Hence the dc operating point is found from\n  Vout/RS = (β/2)(Vin − Vout − VT)²(1 + λ(VDD − Vout))\n  (for λ ≈ 0: Vout/RS = (β/2)(Vin − VT − Vout)²).\n  A convenient form is\n  Vin = VT + Vout + √(2Vout/(βRS))     (λ ≈ 0)\n  which shows Vout increases monotonically with Vin.\n- If Vin were to exceed VDD + VT the device would enter triode; then\n  ID ≈ β[(VGS − VT)VDS − ½VDS²] and the same KCL gives Vout.\n\nUseful limits\n- For gmRS ≫ 1 (i.e., reasonably large bias current), Vout ≈ Vin − VT.\n- For Vin just above VT, ID and gm are small and Vout rises slowly from 0.\n\nSmall‑signal (about a bias point; body at ground)\nLet gm = ∂ID/∂VGS, go = ∂ID/∂VDS = 1/ro, and gmb the body‑effect transconductance (optional).\n\n- Gain:\n  Av = vout/vin = gm / (gm + gmb + go + 1/RS)\n  = gm(RS || ro) / [1 + gm(RS || ro)]  (with gmb = 0).\n  For gm(RS || ro) ≫ 1, Av → 1 (voltage follower).\n- Output resistance (input ac‑grounded):\n  Rout ≈ 1 / (gm + gmb + go + 1/RS).\n  With ideal MOS (gmb = go = 0): Rout ≈ 1/(gm + 1/RS).\n- Input resistance: very large at dc (≈ gate leakage limited); at ac it is set by gate capacitances (Cgs, Cgd), with little Miller effect because Av ≈ 1.\n\nHeadroom/swing\n- Upper swing limit: keep the device in saturation: Vin ≤ VDD + VT (normally satisfied).  \n- Lower swing: when Vin drops to ≲ VT, the transistor turns off and Vout → 0.  \n- Body effect (source above substrate) increases VT with VSB, reducing Vout and Av slightly; in small‑signal this appears as gmb in the formulas.\n\nIn words: the circuit is a resistively biased nMOS source follower. It produces a non‑inverting output that roughly tracks the input one threshold below, with near‑unity gain when gm(RS || ro) is large, high input resistance, and low output resistance of roughly 1/(gm + 1/RS) (or 1/(gm + gmb + go + 1/RS) if non‑ideal effects are included).",
        "format": "markdown",
        "sha256": "fc7f8b4d0b144356c6935aca6132f7127803930bf6dfc37392fdb5b54f68c9f6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the equivalent small-signal gain, reducing to gmRS/(1 + gmRS) when body effect and ro are neglected. The additional analysis is consistent with the topology.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 7629,
        "total_tokens": 8273,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6784,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 7629,
        "total_tokens": 8273,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6784,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here is a compact large‑signal and small‑signal analysis of the stage. I interpret the circuit as an NMOS M1 with source at ground, drain pulled up to VDD through RD, input at the gate, and output at the drain (a resistive‑load common‑source stage/inverter).\n\nAssumptions\n- Long‑channel MOS model, body tied to source (no body effect).\n- Channel‑length modulation neglected unless noted.\n- Define β = μnCox(W/L), VT = NMOS threshold, VOV = VGS − VT.\n\nDC (large‑signal) transfer Vout(Vin)\n- Region 1 (cutoff): Vin ≤ VT\n  ID = 0 → Vout = VDD.\n- Region 2 (saturation): Vin > VT and Vout ≥ Vin − VT\n  ID = (1/2)β(Vin − VT)^2\n  Ohm’s law in RD: (VDD − Vout)/RD = ID\n  ⇒ Vout = VDD − (1/2)βRD(Vin − VT)^2  (valid while Vout ≥ Vin − VT).\n- Region 3 (triode): Vin > VT and Vout < Vin − VT\n  ID = β[(Vin − VT)Vout − 0.5 Vout^2]\n  (VDD − Vout)/RD = β[(Vin − VT)Vout − 0.5 Vout^2]\n  ⇒ 0.5βRD Vout^2 − [βRD(Vin − VT) + 1]Vout + VDD = 0\n  (choose the physically small root for Vout).\n\nTransition (where device just leaves saturation)\n- Occurs when Vout = Vin − VT.\n  Using saturation current equality:\n  (VDD − Vin + VT)/RD = (1/2)β(Vin − VT)^2.\n  Let x = Vin − VT. Then 0.5βRD x^2 + x − VDD = 0,\n  giving x = [−1 + √(1 + 2βRD VDD)]/(βRD).\n  Thus\n  Vin,trans = VT + x,\n  Vout,trans = x.\n\nEnd‑point logic levels (useful if viewed as an inverter)\n- VOH ≈ VDD (Vin < VT).\n- When Vin is large, M1 is in triode and pulls the node down:\n  For small Vout, rON ≈ 1/[β(Vin − VT)] and\n  VOL ≈ VDD · rON/(RD + rON) (approaches 0 if RD ≪ rON).\n\nIncluding channel‑length modulation (optional)\n- In saturation: ID ≈ (1/2)β(Vin − VT)^2(1 + λVout).\n  With (VDD − Vout)/RD = ID, solve the linear equation in Vout:\n  Vout = [VDD/RD − (1/2)β(Vin − VT)^2] / [1/RD + (1/2)βλ(Vin − VT)^2].\n\nSmall‑signal (around a chosen bias with M1 in saturation)\n- gm = β(VOV) = 2ID/VOV.\n- ro ≈ 1/(λID) if channel‑length modulation is considered.\n- Gain: Av = vo/vin ≈ −gm(RD || ro) ≈ −gm RD (if ro ≫ RD).\n- Input resistance ≈ ∞; output resistance ≈ RD || ro.\n\nQualitative behavior\n- It inverts: low Vin → high Vout, high Vin → low Vout.\n- With proper bias in saturation, it functions as a common‑source voltage amplifier; around the transition point the magnitude of gain is largest.",
        "format": "markdown",
        "sha256": "19b90b8e976b1d00db4ef56de79417fa578428e71d352befebfcb28420591616"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology: the input is applied to M1’s source and its gate is AC-grounded, making this a common-gate stage. Thus the stated inverting common-source gain and high input resistance contradict the essential circuit behavior.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 7915,
        "total_tokens": 8559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 7915,
        "total_tokens": 8559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming M1 is an nMOS with source and body at ground (right rail), RD is a pull‑up to VDD, Vout is at the drain. This is the resistive‑load nMOS inverter (common‑source stage).\n\nKey equations (long‑channel device, body effect neglected):\n- Id(Vin,Vout) = 0, Vin < Vtn  → cutoff\n- Saturation (Vout ≥ Vin − Vtn, Vin ≥ Vtn):\n  Id = (1/2) kn (Vin − Vtn)^2       [kn = μnCox(W/L)]\n- Triode/linear (Vout < Vin − Vtn, Vin ≥ Vtn):\n  Id = kn[(Vin − Vtn)Vout − (1/2)Vout^2]\nKCL at the output node:\n  (VDD − Vout)/RD = Id(Vin, Vout)\n\nFrom this:\n- For Vin < Vtn: Id ≈ 0 → Vout = VOH ≈ VDD.\n- For Vin ≥ Vtn: solve KCL with the appropriate Id expression.\n  • If the solution satisfies Vout ≥ Vin − Vtn → it lies in saturation and\n    Vout ≈ VDD − (RD/2) kn (Vin − Vtn)^2  (ignoring channel‑length modulation).\n  • Otherwise it is in triode and Vout is the root of\n    (VDD − Vout)/RD = kn[(Vin − Vtn)Vout − (1/2)Vout^2].\n\nUseful operating points:\n- Switching threshold VM (where Vin = Vout): device is typically in saturation, so\n  (VDD − VM)/RD = (1/2) kn (VM − Vtn)^2. Solve this quadratic for VM.\n- VOL (Vin “high”): as Vin increases well above Vtn the device enters triode and\n  pulls the node low; ideally VOL ≈ 0 (limited in practice by RD and on‑resistance).\n\nSmall‑signal (bias at some Vin with M1 in saturation):\n- gm = kn(VGS − Vtn) = kn(Vin − Vtn)\n- ro ≈ 1/(λ Id) if channel‑length modulation is included\n- Voltage gain Av ≈ −gm (RD || ro)  (≈ −gm RD if ro ≫ RD)\n- Rin ≈ ∞ (MOS gate), Rout ≈ RD || ro.\n\nThis gives the full DC transfer characteristic and the small‑signal behavior. If you provide VDD, RD, W/L, μnCox, Vtn (and λ if needed), I can compute numeric values and plot Vout(Vin).",
        "format": "markdown",
        "sha256": "84de7f0dde80e0dc32867195c36a57ffb894775fa40f626ebcafa4680036c7cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a common-source inverter. In the figure, Vin drives M1's source and its gate is dc-biased (ac-grounded), making this a common-gate stage with Rin ≈ 1/gm and non-inverting gain; the candidate's DC and small-signal analysis applies to the wrong topology.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 6097,
        "total_tokens": 6741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 6097,
        "total_tokens": 6741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an NMOS common‑source stage with a resistive load RD connected to VDD.  \nInput is the gate (Vin), the source is at ground (bulk tied to source), and the output is the drain node (Vout).\n\n1) DC equations (large‑signal)\n- Load line: ID = (VDD − Vout)/RD.\n- Device regions (with source at 0 V):\n  • Cutoff: Vin ≤ VTH → ID ≈ 0 → Vout = VDD.  \n  • Saturation: Vout ≥ Vin − VTH and Vin > VTH  \n    ID ≈ ½ kn (Vin − VTH)² (ignore channel‑length modulation, λ = 0).  \n    Hence Vout = VDD − ½ kn RD (Vin − VTH)².\n    If λ ≠ 0: with A = ½ kn (Vin − VTH)²,\n      Vout = (VDD − RD A)/(1 + λ RD A).\n  • Triode: Vout < Vin − VTH  \n    ID ≈ kn[(Vin − VTH)Vout − ½ Vout²].  \n    Together with the load line:\n      ½ kn RD Vout² − [1 + kn RD (Vin − VTH)] Vout + VDD = 0\n    (choose the root that satisfies Vout < Vin − VTH).\n\n- Limit between saturation and triode occurs when Vout = Vin − VTH.  \n  Let x ≡ Vin − VTH; then at the boundary\n    ½ kn RD x² + x − VDD = 0\n    → xB = [−1 + √(1 + 2 kn RD VDD)]/(kn RD), and Vin,B = VTH + xB.\n\n2) Small‑signal (about a bias point in saturation)\n- gm = ∂ID/∂VGS ≈ kn(VGS − VTH) = 2ID/Vov, where Vov = VGS − VTH.\n- ro ≈ 1/(λID) (ro → ∞ if λ ≈ 0).\n- Voltage gain: Av = vo/vin ≈ −gm (RD || ro) (≈ −gm RD if ro ≫ RD).\n- Input resistance ≈ ∞ (MOS gate).  \n- Output resistance ≈ RD || ro.\n\n3) Biasing and swing (rules of thumb)\n- For maximum symmetric swing with λ ≈ 0, choose Vout,Q ≈ VDD/2 and ensure Vov ≤ Vout,min so the device stays in saturation; i.e., Vov ≲ Vout,Q.  \n- The smallest allowed output in saturation is Vout,min ≈ Vov.\n\nThese relations give the complete DC transfer characteristic Vout(Vin) and the small‑signal gain of the stage.",
        "format": "markdown",
        "sha256": "cdaca3a925b5958aeb17eea29c47e9a0249d3eab015774eac32472ba66595fd6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology: Vin is applied to M1’s source while its gate is DC-biased and AC-grounded, making this a common-gate stage. Consequently, its common-source gain sign and input-resistance conclusions do not apply.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 5953,
        "total_tokens": 6597,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5312,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 5953,
        "total_tokens": 6597,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5312,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a common‑gate NMOS amplifier.\n\nDC (bias):\n- C1 is open for DC, so the source is at 0 V.\n- VGS = Vb, so ID is set by Vb. With channel‑length modulation:\n  ID ≈ (1/2) kn (W/L) (Vb − VT)^2 (1 + λVDS)\n- Vout,DC = VDD − ID RD.\n- Keep M1 in saturation: Vout,DC ≥ Vb − VT.\n\nMidband small‑signal (C1 chosen large so it is a short for signal):\n- Gate (and bulk) are AC ground; input is applied at the source.\n- Define gm = ∂ID/∂VGS, gmb ≈ ηgm (body effect), ro = 1/go.\n\nVoltage gain (including ro and body effect):\n- Av = vout/vin = (gm + gmb + 1/ro) / (1/RD + 1/ro)\n  = (gm + gmb + 1/ro) · (RD || ro)\n  ≈ (gm + gmb) RD if ro >> RD (and ≈ gm RD if body effect is negligible).\n- Sign is non‑inverting.\n\nInput resistance (seen by the source through C1):\n- Rin = vin/iin = (ro + RD) / [1 + (gm + gmb) ro]\n  ≈ 1/(gm + gmb) when ro >> RD.\n  (This low Rin is why common‑gate is used for 50‑Ω matching.)\n\nOutput resistance (input set to zero, i.e., source at AC ground):\n- Rout ≈ RD || ro.\n\nCurrent gain:\n- iout/iin = (vout/RD)/(vin/Rin) = 1 (exact with this model); the stage acts as a current buffer.\n\nFrequency note:\n- C1 only provides AC coupling; the low‑frequency cutoff is\n  fL ≈ 1 / [2π C1 (Rs + Rin)], where Rs is the source resistance of Vin.",
        "format": "markdown",
        "sha256": "250424e9c95cd34cc353b44a29d1b7eb5d31d97a59e994fad4b72f94e0be0ea8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer identifies a common-gate topology but misses the source's direct short to ground, so the input is shorted and the ideal gain is zero; its common-gate gain expression therefore does not apply.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 11988,
        "total_tokens": 12632,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11520,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 11988,
        "total_tokens": 12632,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11520,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a common‑gate NMOS amplifier.\n\nHow it works\n- The input signal is AC‑coupled to the source through C1. The gate is DC‑biased at Vb and is AC‑grounded. The drain is loaded by RD to VDD and is the output.\n- When vin increases, vgs decreases, the channel current drops, the drop across RD decreases, and vout rises. Hence the stage is non‑inverting.\n\nDC (bias)\n- C1 is open for DC; the source is at 0 V. The transistor is biased by Vb.\n- Saturation condition: Vout,DC ≥ Vb − Vth.\n- With ID set by Vb, Vout,DC = VDD − ID RD.\n\nSmall‑signal (midband, C1 large, gate AC‑ground, body effect neglected)\nLet gm and ro be the device transconductance and output resistance.\n\n- Voltage gain:\n  Av = vout/vin = RD (1 + gm ro) / (RD + ro)\n  ≈ + gm (RD || ro) when gm ro ≫ 1.\n\n- Input resistance (seen into the source with the signal source removed):\n  Rin = (RD + ro) / (1 + gm ro) ≈ 1/gm (if ro ≫ RD).\n\n- Output resistance (with vin shorted to AC ground):\n  Rout = RD || ro.\n\n- Useful identity: Av × Rin = RD → the stage passes current with unity gain,\n  iout/iin = 1 (exact under the above model).\n\nFrequency note\n- C1 creates a high‑pass input corner: fL ≈ 1 / [2π C1 (Rs + Rin)], where Rs is the source resistance of the signal generator (if Rs ≈ 0, fL ≈ 1 / (2π C1 Rin)).\n- With the gate at AC ground, there is little Miller effect, so the common‑gate stage has wide bandwidth and low input resistance, useful for low‑impedance sources or as a cascode.\n\nIf body effect matters, replace gm by gm + gmb in Rin and in the factor (gm ro + 1).",
        "format": "markdown",
        "sha256": "af0a5e5920e0ef2864f389094c50bf0e5254cc01ea577fbe05260ce24df92c9f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Identifies the common-gate topology but misses that the source node is directly shorted to ground, so the input is shorted and the ideal gain is zero. It instead gives ordinary common-gate gain formulas.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 11180,
        "total_tokens": 11824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10688,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 11180,
        "total_tokens": 11824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10688,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Type of stage\n- NMOS common–gate amplifier.\n- Gate is DC-biased at Vb (AC ground), the input is applied to the source through the coupling capacitor C1, and the output is taken at the drain through RD to VDD.\n\nDC bias\n- C1 is open at DC, so the device is biased only by Vb.\n- For saturation: VDS ≥ Vov = VGS − Vth (VGS set by Vb).\n- ID is set by Vb; VOUT,DC = VDD − ID RD.\n\nMidband small‑signal (use gm, ro; include body effect with gmb if desired)\n- Voltage gain from source node to output:\n  Av ≡ vo/vs = (gm + gmb + 1/ro) / (1/RD + 1/ro).\n  If ro ≫ RD and gmb is small: Av ≈ +gm RD (non‑inverting).\n- Input resistance seen at the source:\n  Rin = (RD + ro) / [1 + (gm + gmb) ro] ≈ 1/(gm + gmb) ≈ 1/gm (when gm ro ≫ 1).\n  This is why setting gm ≈ 1/Rs yields input matching to a source of Rs (e.g., 50 Ω).\n- Output resistance with input set to zero (source AC‑grounded):\n  Rout ≈ RD ∥ ro.\n\nEffect of the coupling capacitor C1\n- With a source of Thevenin resistance Rs, the capacitor forms a high‑pass:\n  vs/vin = Rin / [Rs + Rin + 1/(jωC1)].\n  Low‑frequency pole: fL ≈ 1/[2π C1 (Rs + Rin)].\n  At midband (|1/(jωC1)| ≪ Rs + Rin), vs ≈ vin × Rin/(Rs + Rin).\n- Overall midband gain from the generator:\n  vo/vin ≈ Av × Rin/(Rs + Rin) ≈ (gm RD) × Rin/(Rs + Rin) (for ro ≫ RD).\n\nKey properties\n- Non‑inverting voltage gain.\n- Low input resistance ≈ 1/gm; useful for broadband input matching.\n- Output swing limited by saturation condition: vout must stay above VS + Vov.",
        "format": "markdown",
        "sha256": "0b4884e23e26f990e017db6f1ee4d66a152befe79ec4c81a65e9206db3986c12"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Identifies the common-gate topology but misses that the source node is hard-shorted to ground, so the input is shorted and the ideal gain is zero. Its common-gate gain and input-resistance analysis ignore that short.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 14289,
        "total_tokens": 14933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13760,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 14289,
        "total_tokens": 14933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13760,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Two.\n\nReason: Only two independent high‑impedance nodes exist (gate and drain). Cgs and Cdb are shunt capacitors to ground at those nodes; Csb is on a grounded node; Cgd couples the two nodes (creating a zero) but does not add another state. Hence the transfer function is second order with two poles.",
        "format": "markdown",
        "sha256": "aaf3939d56924b710e6a5ff0b562d94ef9277ea79a0b18116a4e9f2f02f8b6ab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and accounts for the capacitor topology: Csb is on the grounded source node, while Cgd couples the gate and drain without adding an independent state.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 5017,
        "total_tokens": 5665,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 5017,
        "total_tokens": 5665,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Two.\n\nReason: In small-signal, the only dynamic nodes are the gate and the drain. Cgs and Cgd load the gate node; Cdb and Cgd load the drain (output) node. The source is at AC ground, so Csb does not create an independent state. Therefore the transfer function is second order with two poles.",
        "format": "markdown",
        "sha256": "5fd77e10d4132cc10189dbba47958b10853b6784cb03222d1bd7a577bb2f180d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and accounts for the capacitors: Csb has no independent state with the source at AC ground, while the remaining capacitors act at the gate and drain.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 3695,
        "total_tokens": 4343,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3584,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 3695,
        "total_tokens": 4343,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3584,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Two.\n\nReason: Only two nodes store independent energy—the gate node (through Cgs and the Miller-reflected part of Cgd) and the drain/output node (through Cdb and the remaining part of Cgd). The source is at ac ground, so Csb doesn’t add a state, and Cgd just couples the two nodes (it introduces a zero but no extra pole).",
        "format": "markdown",
        "sha256": "81a4fd94bfc7e52901af8f3d778ee1cbd230be20ec02136f9ca9ce19c43501d2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and accounts for the capacitors: Csb adds no state at the grounded source, while Cgs, Cgd, and Cdb contribute to the two gate/drain states. It also correctly notes that Cgd’s zero does not add a pole.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 6034,
        "total_tokens": 6682,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5888,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 6034,
        "total_tokens": 6682,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5888,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What it is\n- NMOS M1 with a drain load RD. The source is not at ground: it is tied to node VF, which is connected to ground through R2 and to the output (drain) through R1. The gate is driven by Vin.\n- The network R1–R2 feeds back a sampled version of the output voltage to the source, so the gate sees the error vgs = Vin − VF. This is a series–shunt (voltage) negative‑feedback amplifier.\n\nKey small‑signal relations (include ro if desired)\nLet vo ≡ vout and vf ≡ vF. Small‑signal KCL at the two nodes gives\n- vo/RD + (vo − vf)/R1 + (vo − vf)/ro + gm(Vin − vf) = 0\n- vf/R2 + (vf − vo)/R1 + (vf − vo)/ro − gm(Vin − vf) = 0\n\nAdding the two equations cancels R1, ro and gm terms and yields an important identity that is true independent of gm, R1 and ro:\n- vo/RD + vf/R2 = 0  ⇒  vo = −(RD/R2) vf\n\nClosed‑loop gain\nUsing the identity above in the first KCL equation,\n\nAv ≡ vo/Vin = − gm RD R1 ro\n               / { ro [gm R1 R2 + (RD + R1 + R2)] + R1 (RD + R2) }\n\nIf ro → ∞ (often a good approximation),\n\nAv ≈ − gm RD R1 / (gm R1 R2 + RD + R1 + R2)\n\nUseful limits and checks\n- Large loop gain (gm R2 ≫ 1 and R1 not too small): Av → − RD / R2 (independent of transistor parameters).\n- R1 → ∞ (no explicit feedback path from output to source): Av → − gm RD / (1 + gm R2) (source‑degenerated CS stage).\n- R2 → 0: Av → − gm (RD ∥ R1).\n- The identity vo = −(RD/R2) vf holds for any gm and ro.\n\nInput and output resistances\n- Rin ≈ ∞ (MOS gate current ≈ 0; limited only by whatever bias network drives the gate).\n- Rout (with Vin = 0), using the same identity:\n\nRout ≈ RD / [1 + gm R2 + (RD + R2)(1/R1 + 1/ro)]\n\nFor R1 ≫ RD and ro ≫ RD, Rout ≈ RD/(1 + gm R2).\n\nOperating point (DC)\n- The gate must be biased so M1 operates in saturation: VDS ≥ VGS − VT.\n- DC values depend on Vin and the chosen resistors; the feedback tends to force VF to follow Vin (for large gm), while the output DC level is set by the drop across RD.\n\nInterpretation\n- M1 is a transconductance stage; RD converts drain current to voltage; R1–R2 sense output voltage and return a fraction to the source, linearizing and desensitizing the gain.\n- With sufficient loop gain the closed‑loop gain is set mainly by RD/R2, while R1 is used to set loop strength and bias.",
        "format": "markdown",
        "sha256": "4094ac536e79e9364966d824dcf07ffccdaddab430e12231ddb60ccbc113dc1f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer reverses the essential connections: the input should drive M1’s source and the divider should feed its gate, not the other way around. Its negative gain and subsequent analysis therefore describe a different circuit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 17551,
        "total_tokens": 18195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 17551,
        "total_tokens": 18195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume M1 is an n‑MOSFET whose body is at ground. RD is a drain load to VDD. R1–R2 form a divider from the output to the source; VF is the source voltage.\n\nWhat the circuit is\n- A common–source stage with positive feedback from drain to source.\n- It behaves as an inverting Schmitt trigger (hysteretic comparator). The divider makes the effective input threshold depend on the actual output level.\n\nKey relations (near switching)\n- For small drain current the divider sets VF ≈ α·Vout, where α = R2/(R1 + R2).\n- The instantaneous turn‑on/turn‑off condition is VGS = Vin − VF = VTN.\n  Hence the effective input threshold is VTH,eff(Vout) = VTN + α·Vout.\n\nSwitching thresholds\n- Rising input (output presently HIGH ≈ VDD): \n  Vin↑ threshold ≈ VTN + α·VDD.\n- Falling input (output presently LOW ≈ VOL): \n  Vin↓ threshold ≈ VTN + α·VOL ≈ VTN (if VOL ≈ 0).\n\nHysteresis width\n- ΔV ≈ α·(VDD − VOL) ≈ α·VDD.\n- For a desired ΔV, choose α = ΔV/(VDD − VOL); then R1 = R2·(1 − α)/α.\n\nSmall‑signal (about the transition)\n- Using gm for M1 and neglecting ro, the incremental gain is\n  Av ≡ ∂Vout/∂Vin ≈ −gm·RD / (1 − α·gm·RD).\n- Regeneration (bistability/Schmitt action) occurs when α·gm·RD ≥ 1; the slope becomes large and positive as the product approaches 1.\n\nNotes\n- RD primarily sets the low output level VOL and the on‑state current ION ≈ (VDD − VOL)/RD.\n- R1, R2 set the amount of positive feedback (hysteresis) through α.",
        "format": "markdown",
        "sha256": "253019d46897162e98bf8f9050fe78ab551c925d94154a799a47ba42e0c4cad2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology: the input is at M1’s source and the output divider feeds the gate, producing negative feedback. It instead places the divider at the source and concludes the circuit is a positive-feedback Schmitt trigger, so its thresholds and gain analysis do not apply.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 14560,
        "total_tokens": 15204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14080,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 14560,
        "total_tokens": 15204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14080,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "- What it is\n  - M1 with RD is a common–source stage (drain load RD to VDD, output at the drain).\n  - R1–R2 take a fraction of the output voltage and feed it to the source of M1 (node VF).  \n    This is shunt–series (voltage–series) negative feedback. The gate is the “non‑inverting” input.\n\n- Small‑signal analysis (midband, ro ≫ R’s)\n  - i_d = g_m(v_in − v_f)\n  - v_out = −R_D i_d\n  - v_f = β v_out, where β = R2/(R1 + R2)\n  - Combine: v_out = −g_m R_D (v_in − β v_out)\n    ⇒ A_v ≡ v_out/v_in = −A/(1 − Aβ), with A = g_m R_D (open‑loop gain magnitude).\n  - If |Aβ| ≫ 1 (good feedback), A_v ≈ 1/β = 1 + R1/R2, i.e. a non‑inverting gain set by R1 and R2 and largely independent of M1 and RD.\n  - Because v_in − v_f ≈ 0 under strong feedback, v_f ≈ v_in and distortion is reduced.\n\n- Resistances\n  - Input resistance ≈ gate resistance → very high (≈∞ for MOS gate).\n  - Open‑loop output resistance ≈ R_D; with feedback it is reduced by the loop gain:\n    R_out,CL ≈ R_D/(1 + |Aβ|).\n\n- DC operating point (strong inversion, neglect channel‑length modulation)\n  - I_D ≈ (k/2)(V_in − V_F − V_TH)^2, where k = μ_n C_ox W/L.\n  - V_out = V_DD − I_D R_D.\n  - With ro large, V_F ≈ β V_out. These three relations give the bias point (usually solved iteratively).\n  - Keep M1 in saturation: V_DS = V_out − V_F ≥ V_GS − V_TH = V_in − V_F − V_TH.\n\n- Notes\n  - Finite ro places an additional resistor in parallel with R1; for most designs ro ≫ R1 so its effect on β is small.\n  - The stage is essentially a one‑transistor “op‑amp” in non‑inverting configuration: gain ≈ 1 + R1/R2, high input resistance, lowered output resistance, and improved linearity.",
        "format": "markdown",
        "sha256": "1e2af20d95d1f4c5f3ae662c87d48d8a30a545f32f75d488836dae71734a5b61"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The essential topology is reversed: the input is applied to M1’s source, and the output divider feeds the gate—not the other way around. The resulting small-signal model and feedback-sign claims therefore do not apply. It gets some general divider-feedback and gain-ratio ideas right, but misses the defining connection.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9401,
        "total_tokens": 10045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9401,
        "total_tokens": 10045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What it is\n- A single‑ended inverting gain stage: a pMOS (M1) on top driven by Vin and an nMOS (M2) at the bottom biased by Vb, with the output at the common drain node. M2 behaves as a current sink; M1 steers current from VDD into the node.\n\nLarge‑signal/DC\n- Currents (Shichman–Hodges, saturation):\n  • M1 (pMOS): I1 = (βp/2)(VDD − Vin − |VTp|)^2(1 + λp(VDD − Vout))\n  • M2 (nMOS): I2 = (βn/2)(Vb − VTn)^2(1 + λnVout)\n  • KCL: I1 = I2\n  • If both devices are in saturation, solving for Vout gives\n    Vout = [I1,0(1 + λpVDD) − I2,0] / (λp I1,0 + λn I2,0)\n    with I1,0 = (βp/2)(VDD − Vin − |VTp|)^2 and I2,0 = (βn/2)(Vb − VTn)^2.\n- Saturation constraints for that solution to be valid:\n  • M2: Vout ≥ Vb − VTn\n  • M1: Vout ≤ Vin + |VTp|\n  • Also M1 on requires Vin < VDD − |VTp| and M2 on requires Vb > VTn.\n- If the above bounds are violated:\n  • For Vin high (M1 weak/off): M1 enters triode or cuts off and M2 pulls the node low; Vout → 0.\n  • For Vin very low (M1 strong): M2 enters triode and Vout is pushed high, approaching VDD.\n- Thus the Vin–Vout characteristic is inverter‑like: increasing Vin reduces Vout.\n\nSmall‑signal (about a bias point where both devices are in saturation)\n- gm1 = βp(VDD − Vin − |VTp|) = 2ID/|Vov,p|\n- ro1 ≈ 1/(λp ID), ro2 ≈ 1/(λn ID)\n- Voltage gain: Av = ∂Vout/∂Vin ≈ −gm1 (ro1 || ro2)  (negative/inverting)\n- Output resistance: Rout ≈ ro1 || ro2\n- Input resistance at Vin: very large (gate of M1)\n\nDesign/useful notes\n- Choose Vb to set the sink current ID so that, at the chosen Vin (bias), I1 ≈ I2 and Vout lies within Vb − VTn ≤ Vout ≤ Vin + |VTp| (both transistors in saturation) to obtain linear gain.\n- Logic‑like limits: Vout,low ≈ 0 (limited by M2’s triode region) and Vout,high approaches VDD (limited by M1’s triode region).",
        "format": "markdown",
        "sha256": "0a49efeaea14504bda0c88fbe585ba3154c500da229913818b4f8796ec301523"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the circuit as a pMOS/nMOS common-drain-node inverting stage. The actual circuit is an NMOS source follower with its output at M1’s source and a biased NMOS current sink; the predicted negative gain is therefore wrong.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9511,
        "total_tokens": 10155,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9511,
        "total_tokens": 10155,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What it is\n- M1 is a pMOS whose source is at VDD and gate is Vin.\n- M2 is an nMOS current‑sink whose source is at ground and gate is a bias Vb.\n- The output is the common drain node. This is an inverting gain stage (a current‑source load inverter): M2 sets the bias current; M1 converts Vin to pull‑up current.\n\nDC and regions of operation\nLet VTP (<0) and VTN (>0) be the thresholds and define\nVSG1 = VDD − Vin,  VSD1 = VDD − Vout\nVGS2 = Vb,         VDS2 = Vout\n\n- M1 on when VSG1 > |VTP| ⇔ Vin < VDD − |VTP|\n- M2 on when VGS2 > VTN ⇔ Vb > VTN\n- Saturation conditions:\n  - M1: VSD1 ≥ VSG1 − |VTP| ⇔ Vout ≤ Vin + |VTP|\n  - M2: VDS2 ≥ VGS2 − VTN   ⇔ Vout ≥ Vb − VTN\n\nThus for both devices in saturation the output must lie in\nVb − VTN < Vout < Vin + |VTP|.\n\nLarge‑signal (square‑law, ignoring body effect)\nCurrents (defined positive from drain to source of each device):\n- pMOS (M1, sat): ID1 ≈ (βp/2)(VDD − Vin − |VTP|)^2(1 + λp(VDD − Vout))\n- nMOS (M2, sat): ID2 ≈ (βn/2)(Vb − VTN)^2(1 + λn Vout)\n\nKCL at the output requires ID1 = ID2. If λp, λn ≈ 0 and both devices are in saturation, equality gives the input level that makes the currents equal,\nVDD − Vin − |VTP| = √(βn/βp) (Vb − VTN)\n⇒ Vin,eq = VDD − |VTP| − √(βn/βp)(Vb − VTN)\n\nFor Vin above this value, M1 current decreases and Vout falls; for Vin below it, Vout rises. Hence the stage is inverting.\n\nSmall‑signal (about a bias point with both in saturation)\n- Input is applied only to M1, so Rin ≈ ∞.\n- M2’s gate is at AC ground; it contributes only its output resistance ro2.\n- Small‑signal gain:\n  Av = vout/vin ≈ −gm1 (ro1 || ro2)\n  where gm1 = 2ID/Vov1 = √(2βp ID), ro1 ≈ 1/(λp ID), ro2 ≈ 1/(λn ID), Vov1 = VSG1 − |VTP|.\n- Output resistance: Rout ≈ ro1 || ro2.\n\nOutput swing (approximate)\n- High level: VOH ≈ VDD − VDS,sat1 = VDD − Vov1 (set by how strongly M1 is biased).\n- Low level: VOL ≈ VDS,sat2 = Vov2 = Vb − VTN (set by M2’s overdrive).\nTo keep both devices in saturation at the bias point: Vb − VTN < Vout < Vin + |VTP|.\n\nSummary\nThe circuit is a one‑transistor inverting amplifier with a pMOS driver (M1) and an nMOS current‑source load (M2). DC output is found from ID1(Vin, Vout) = ID2(Vout). Around a bias point the gain is approximately −gm1(ro1 || ro2), the input resistance is very high, and the output resistance is the parallel of the two device output resistances.",
        "format": "markdown",
        "sha256": "ff9684a256d7012dd94fc18bced0051ca202971b0c04109a61bebb014236615f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as an inverting pMOS common-source stage with a shared-drain output. M1 is actually an NMOS source follower with its source at Vout, so the gain is positive and near unity; the golden solution assigns 0 to this topology error.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9262,
        "total_tokens": 9906,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8384,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9262,
        "total_tokens": 9906,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8384,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What it is\n- Two transistors in series between VDD and ground. M1 is a PMOS with source at VDD and gate driven by Vin; M2 is an NMOS with source at ground and gate biased by Vb. The output is the common drain node.\n- It is an inverting stage (a “ratioed”/pseudo-CMOS inverter or a common‑source amplifier with a current‑sink load). Vb sets the pull‑down strength and therefore the switching point.\n\nAssumptions for equations below: long‑channel devices (Shichman–Hodges), |Vtp| > 0, Vtn > 0, βp = μpCox(W/L)1, βn = μnCox(W/L)2, currents taken positive from VDD to ground.\n\nRegions and I–V relations\n- PMOS M1 (source = VDD)\n  - Saturation when Vout ≤ Vin + |Vtp|\n    Id1 = (βp/2)(VDD − Vin − |Vtp|)^2\n  - Triode when Vout > Vin + |Vtp|\n    Id1 = βp[(VDD − Vin − |Vtp|)(VDD − Vout) − (VDD − Vout)^2/2]\n- NMOS M2 (source = 0, gate = Vb)\n  - Saturation when Vout ≥ Vb − Vtn\n    Id2 = (βn/2)(Vb − Vtn)^2\n  - Triode when Vout < Vb − Vtn\n    Id2 = βn[(Vb − Vtn)Vout − Vout^2/2]\n\nDC transfer (solve Id1 = Id2 in the appropriate region)\n- Around the switching point both devices are typically in saturation. Then:\n  βp(VDD − Vin − |Vtp|)^2 = βn(Vb − Vtn)^2\n  ⇒ Vin,SW = VDD − |Vtp| − √(βn/βp)·(Vb − Vtn)\n  Raising Vb (stronger pull‑down) moves the switching point to a lower Vin.\n- High output (Vin low): M1 usually triode, M2 saturation. Let Δ = VDD − Vin − |Vtp|.\n  βp[Δ(VDD − VoutH) − (VDD − VoutH)^2/2] = (βn/2)(Vb − Vtn)^2\n  ⇒ VDD − VoutH = Δ − √(Δ^2 − (βn/βp)(Vb − Vtn)^2)\n  For a strong M1 (βp large), VoutH ≈ VDD − (βn/βp)(Vb − Vtn)^2/(2Δ).\n- Low output (Vin high, M1 off): M2 pulls the node down. With M1 ≈ off and M2 triode,\n  βn[(Vb − Vtn)VoutL − VoutL^2/2] ≈ 0 ⇒ VoutL ≈ 0 (ignoring leakage).\n\nSmall‑signal (about a bias point)\n- Only M1’s gate is signal‑driven; M2’s gate is fixed, so its gm does not inject signal current.\n- Gain (including channel‑length modulation):\n  Av = ∂Vout/∂Vin ≈ −gm1 · (ro1 || ro2)\n  where gm1 ≈ √(2βpId) and ro1 ≈ 1/(λpId), ro2 ≈ 1/(λnId) at the operating current Id.\n  The minus sign indicates inversion: increasing Vin reduces pull‑up current and Vout falls.\n- Output resistance: Rout ≈ ro1 || ro2. Input resistance: very high (MOS gate).\n\nKey characteristics\n- Adjustable switching point set primarily by Vb and the ratio √(βn/βp).\n- Static current flows whenever both devices conduct (most of the time), so static power ≈ VDD·Id with Id ≈ (βn/2)(Vb − Vtn)^2 when both are in saturation.\n- Output swing is not perfectly rail‑to‑rail; VoutH is below VDD by an amount set by the required current through M1, and VoutL is near 0.",
        "format": "markdown",
        "sha256": "6d6126f008ac3dfc0610faa1e4b060c85827059d74a7dc8b7ffb64e9a105e88d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the topology and device connections: M1 is not a PMOS pull-up in an inverter; it is an NMOS source follower with output at its source. The claimed inverting gain and common-drain output contradict the circuit.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9379,
        "total_tokens": 10023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8384,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9379,
        "total_tokens": 10023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8384,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What you have is a CMOS inverter.\n\nElements and connections\n- M1 is an nMOS with source at ground, drain at Vout, gate at Vin.\n- M2 is a pMOS with source at VDD, drain at Vout, gate at Vin.\n- Drains are tied to form Vout; both gates are tied to Vin.\n\nStatic operation (long‑channel, no λ)\n- Vin ≲ 0 → M1 off, M2 on → Vout ≈ VDD (VOH), ID ≈ 0.\n- Vin ≳ VDD → M1 on, M2 off → Vout ≈ 0 (VOL), ID ≈ 0.\n- For intermediate Vin both conduct and Vout moves from VDD to 0.\n\nRegions versus Vin\n- M1 turns on when Vin > VTN.\n- M2 turns off when Vin > VDD − |VTP|.\nThus:\n  - 0 ≤ Vin ≤ VTN: VOH ≈ VDD.\n  - VTN < Vin < VDD − |VTP|: both on; Vout is found from Idn = |Idp|.\n  - VDD − |VTP| ≤ Vin ≤ VDD: VOL ≈ 0.\n\nSwitching (trip) point VM\nAt the point of maximum gain (Vout ≈ Vin = VM) both devices are in saturation, so\n  Idn = (βn/2)(VM − VTN)^2\n  |Idp| = (βp/2)(VDD − VM − |VTP|)^2\nEquating gives\n  √βn (VM − VTN) = √βp (VDD − VM − |VTP|)\n\nSolving,\n  VM = [VTN + √(βp/βn) (VDD − |VTP|)] / [1 + √(βp/βn)]\nwhere βn = μn Cox (W/L)n and βp = μp Cox (W/L)p.\n\nNotes/implications\n- VOH ≈ VDD and VOL ≈ 0 → very large noise margins are possible when VM ≈ VDD/2.\n- To center VM near VDD/2, choose (W/L)p ≈ (μn/μp)(W/L)n (typically pMOS 2–3× wider).\n- Static power is ideally zero in the two logic states (only during switching do both conduct and draw current).",
        "format": "markdown",
        "sha256": "71b830752197af3abc83ed44e79f5f915bf877f85a7b69e17edb9539347c5610"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up connections and operation. The additional switching-point and sizing analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 8062,
        "total_tokens": 8426,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7488,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 8062,
        "total_tokens": 8426,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7488,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a CMOS inverter.\n\n- M2 is a PMOS with source at VDD, M1 is an NMOS with source at ground. Their gates are tied to Vin, drains are tied together at Vout.\n\nDC behavior (ideal, λ ≈ 0):\n- Vin ≤ VTN: NMOS off, PMOS on → Vout ≈ VDD (VOH).\n- Vin ≥ VDD − |VTP|: PMOS off, NMOS on → Vout ≈ 0 (VOL).\n- VTN < Vin < VDD − |VTP|: both devices conduct; Vout is found from Idn = Idp.\n\nEqual-current equations (βn = μnCox(W/L)n, βp = μpCox(W/L)p):\n- If NMOS sat, PMOS triode (typical for Vout near low):\n  βn/2 (Vin − VTN)² = βp[(VDD − Vin − |VTP|)(VDD − Vout) − ½(VDD − Vout)²]\n- If PMOS sat, NMOS triode (typical for Vout near high):\n  βp/2 (VDD − Vin − |VTP|)² = βn[(Vin − VTN)Vout − ½Vout²]\n\nSwitching threshold (VM):\nAt the point where Vout = Vin = VM, both devices are in saturation, so\nβn(VM − VTN)² = βp(VDD − VM − |VTP|)²\n⇒ VM = [√βp (VDD − |VTP|) + √βn VTN] / (√βn + √βp)\n\nNotes:\n- With symmetric thresholds (VTN = |VTP|) and βn = βp, VM = VDD/2. Because μp < μn, this usually requires sizing Wp/Wn ≈ μn/μp (≈2–3).\n- Static power is ideally zero (except leakage); short-circuit current flows only while Vin is in the transition region. VOH ≈ VDD and VOL ≈ 0 give large noise margins.",
        "format": "markdown",
        "sha256": "074cfc6408b60b7e16350f1f74c7df6a728bb69c9938a05ef74f168804a73cff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies the CMOS inverter and its PMOS pull-up/NMOS pull-down, with the correct logic-level behavior. A supplemental operating-region description is reversed, but it does not contradict the essential answer, so the golden full-credit rule applies.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 6508,
        "total_tokens": 6872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 6508,
        "total_tokens": 6872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a CMOS inverter. M2 is a PMOS pull‑up to VDD and M1 is an NMOS pull‑down to ground. Their gates are tied to Vin and their drains form Vout.\n\nQualitative operation\n- Vin low (≈0): M1 OFF, M2 ON → Vout ≈ VDD (logic “1”).\n- Vin high (≈VDD): M2 OFF, M1 ON → Vout ≈ 0 (logic “0”).\n- Static power ≈ 0 in the logic states; current flows only while Vin is in the transition region.\n\nDC analysis (long‑channel square‑law, λ≈0)\nLet βn=μnCox(W/L)n, βp=μpCox(W/L)p, VTn>0, VTp=−|VTp|.\n\nWhen both devices conduct, find Vout by equating currents using the correct regions:\n\nNMOS\n- Triode: In = βn[(Vin−VTn)Vout − 0.5 Vout²]\n- Saturation (Vout ≥ Vin−VTn): In = 0.5 βn(Vin−VTn)²\n\nPMOS\n- Triode: Ip = βp[(VDD−Vin−|VTp|)(VDD−Vout) − 0.5 (VDD−Vout)²]\n- Saturation (Vout ≤ Vin+|VTp|): Ip = 0.5 βp(VDD−Vin−|VTp|)²\n\nSolve In = |Ip| to get the VTC in the transition region.\n\nSwitching threshold (Vout = Vin = VM)\nAt the switching point both devices are in saturation, so\n√βn (VM − VTn) = √βp (VDD − VM − |VTp|)\n\nVM = [√βn VTn + √βp (VDD − |VTp|)] / (√βn + √βp)\n\nIf VTn ≈ |VTp| and βp ≈ βn (often achieved with Wp/Wn ≈ μn/μp ≈ 2–3), then VM ≈ VDD/2.\n\nKey results\n- VOH ≈ VDD, VOL ≈ 0.\n- Zero static power in steady logic states.\n- Noise margins and slope come from the VTC; points where dVout/dVin = −1 define VIH and VIL.",
        "format": "markdown",
        "sha256": "e0afba484563c86984a5f4757c0420b6a714aeaf0227077a16f4467ca6d20675"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up, and the operating states and added DC analysis are consistent with the topology.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 7579,
        "total_tokens": 7943,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7040,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 7579,
        "total_tokens": 7943,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7040,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It is a CMOS inverter.\n\n- M1: pMOS, source at VDD, drain at Vout, gate = Vin.\n- M2: nMOS, source at GND, drain at Vout, gate = Vin.\n\nUse VTn > 0, VTp < 0 (|VTp| = −VTp). Let\nβn = μnCox(W/L)n and βp = μpCox(W/L)p.\nFor MOSFETs (no channel-length modulation):\nId,sat = (β/2)(VGS − VT)²,\nId,lin = β[(VGS − VT)VDS − ½VDS²].\n\nDC transfer (Vout versus Vin)\n\n1) Vin ≤ VTn\n- M2 OFF, M1 ON.\n- Vout ≈ VDD.\n\n2) VTn < Vin < VM (left half of transition)\n- nMOS in saturation, pMOS in linear region.\n- With a = VDD − Vin − |VTp| and b = Vin − VTn:\nVout = VDD − y, where\ny = a − √(a² − (βn/βp)b²)\n(0 ≤ y ≤ a, so Vout drops from VDD as Vin rises).\n\n3) Vin = VM (switching point)\n- Both devices in saturation; equating currents gives\n√βn(VM − VTn) = √βp(VDD − VM − |VTp|),\nso\nVM = [√βp VDD + √βn VTn + √βp |VTp|] / (√βn + √βp).\n\nA common design choice is to place VM at VDD/2; then\n√(βn/βp) = (VDD/2 − |VTp|)/(VDD/2 − VTn),\nwhich sets the W/L ratio of pMOS vs nMOS.\n\n4) VM < Vin < VDD − |VTp| (right half of transition)\n- pMOS in saturation, nMOS in linear region.\n- With c = Vin − VTn and d = VDD − Vin − |VTp|:\nVout = c − √(c² − (βp/βn)d²).\n\n5) Vin ≥ VDD − |VTp|\n- M1 OFF, M2 ON.\n- Vout ≈ 0.\n\nKey points\n- Logic behavior: low Vin → Vout ≈ VDD (logic 1); high Vin → Vout ≈ 0 (logic 0).\n- The switching threshold VM depends on βn/βp and the thresholds; sizing W/L can center VM near VDD/2.\n- Around VM the small-signal gain magnitude is large; away from VM the gain tends to 0 and the output rails to VDD or 0.",
        "format": "markdown",
        "sha256": "1c92a942abd871a76e61d8479f1bb02b7e77f8673e2e3c988c61f411ff5f1d6c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as a pMOS and analyzes the circuit as an ordinary CMOS inverter. The golden solution requires recognizing both devices as NMOS.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 7715,
        "total_tokens": 8079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 7715,
        "total_tokens": 8079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It’s a CMOS inverter.\n\nAssumptions for analysis\n- Long‑channel MOS, no body effect or channel‑length modulation.\n- NMOS M2 has VTN > 0 and βn = μnCox(W/L)n.\n- PMOS M1 has VTP < 0 and βp = μpCox(W/L)p.\n- Source of M1 is at VDD, source of M2 at ground, drains tied at Vout, gates tied to Vin.\n\nLarge‑signal/DC behavior (VTC)\n- Vin ≤ VTN\n  - M2 off; M1 on (triode).\n  - Vout ≈ VDD, ID ≈ 0 (no DC power).\n- Vin ≥ VDD − |VTP|\n  - M1 off; M2 on (triode).\n  - Vout ≈ 0, ID ≈ 0.\n- VTN < Vin < VDD − |VTP|\n  - Both on; Vout found from IDn = IDp with region conditions below.\n\nRegions and equations\n- NMOS: saturation if Vout ≥ Vin − VTN; triode otherwise.\n  IDn,sat = ½ βn (Vin − VTN)^2\n  IDn,tr = βn[(Vin − VTN)Vout − ½ Vout^2]\n- PMOS: define VSG = VDD − Vin, VSD = VDD − Vout.\n  Saturation if Vout ≤ Vin − |VTP|.\n  IDp,sat = ½ βp (VDD − Vin − |VTP|)^2\n  IDp,tr = βp[(VDD − Vin − |VTP|)(VDD − Vout) − ½ (VDD − Vout)^2]\n\nFor each Vin in the transition region choose the correct pair of regions (usually one device sat, the other triode) and solve IDn = IDp to get Vout(Vin).\n\nSwitching threshold VM (Vout = Vin)\nNear the switching point both devices are typically in saturation; equating currents gives\nsqrt(βn)(VM − VTN) = sqrt(βp)(VDD − VM − |VTP|)\n\nVM = [ sqrt(βp)(VDD − |VTP|) + sqrt(βn)VTN ] / [ sqrt(βn) + sqrt(βp) ]\n\nTo center VM at VDD/2 choose sizing so that\nβp/βn ≈ (VDD/2 − VTN)^2 / (VDD/2 − |VTP|)^2.\nWith |VTP| ≈ VTN this reduces to βp ≈ βn; since μn ≈ 2–3 μp, set Wp ≈ 2–3 Wn.\n\nOther key points\n- Static power ≈ 0 (only during switching both conduct and draw current).\n- Logic function: NOT. Vin = 0 → Vout ≈ VDD, Vin = VDD → Vout ≈ 0.\n- Noise margins come from the VTC; VIL and VIH are found where dVout/dVin = −1 on the left and right slopes, respectively.\n\nThis fully characterizes the CMOS inverter shown.",
        "format": "markdown",
        "sha256": "357dccef2b5241f8fccbc1c0dbb8809a8b556b53d0b8b31515bb86adf7490271"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer treats the circuit as an ordinary complementary CMOS inverter with a PMOS pull-up. The figure has two NMOS devices; this topology misidentification triggers the zero-score rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 4770,
        "total_tokens": 5134,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4032,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 4770,
        "total_tokens": 5134,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4032,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a CMOS inverter: M1 is a pMOS pull‑up (source at VDD) and M2 an nMOS pull‑down (source at ground). Both gates are driven by Vin and the drains are shorted to form Vout.\n\nOperation (long‑channel model, channel–length modulation neglected):\n- nMOS: VGS,n = Vin, VDS,n = Vout. Saturation if Vout ≥ Vin − VTN.\n- pMOS: VSG,p = VDD − Vin, VSD,p = VDD − Vout. Saturation if Vout ≤ Vin + |VTP|.\n\nStatic transfer (piecewise):\n1) Vin ≤ VTN\n   - M2 OFF, M1 ON → Vout ≈ VDD (logic ‘1’). Static power ≈ 0.\n\n2) VTN < Vin < VM  (nMOS sat, pMOS triode)\n   - Equate currents In,sat = Ip,triode:\n     (βn/2)(Vin − VTN)^2 = βp[(VDD − Vin − |VTP|)(VDD − Vout) − ½(VDD − Vout)^2]\n   - Solve for Vout:\n     Let y = VDD − Vout ≥ 0,\n     ½y^2 − (VDD − Vin − |VTP|)y + (βn/2βp)(Vin − VTN)^2 = 0\n     ⇒ Vout = VDD − [(VDD − Vin − |VTP|) − √((VDD − Vin − |VTP|)^2 − (βn/βp)(Vin − VTN)^2)]\n\n3) Vin = VM  (both in saturation, switching point)\n   - Set In,sat = Ip,sat:\n     βn(VM − VTN)^2 = βp(VDD − VM − |VTP|)^2\n     ⇒ VM = [α(VDD − |VTP|) + VTN]/(1 + α),  where α = √(βp/βn)\n     For βn = βp and |VTP| = VTN, VM = VDD/2.\n\n4) VM < Vin < VDD − |VTP|  (pMOS sat, nMOS triode)\n   - Equate Ip,sat = In,triode:\n     βn[(Vin − VTN)Vout − ½Vout^2] = (βp/2)(VDD − Vin − |VTP|)^2\n     ⇒ Vout = (Vin − VTN) − √((Vin − VTN)^2 − (βp/βn)(VDD − Vin − |VTP|)^2)\n\n5) Vin ≥ VDD − |VTP|\n   - M1 OFF, M2 ON → Vout ≈ 0 (logic ‘0’). Static power ≈ 0.\n\nNotes\n- βn = μnCox(W/L)n, βp = μpCox(W/L)p. To get VM ≈ VDD/2, choose βn ≈ βp (usually Wp ≈ 2–3 Wn because μn > μp).\n- Around VM the small‑signal gain with channel‑length modulation is approximately\n  Av ≈ −(gmn + gmp)(ron || rop) = −(gmn + gmp)/(gdn + gdp),\n  giving a large negative slope (high noise margins).\n- Ideally the inverter consumes no static power at the logic rails; current flows only while switching (Vin in the transition region).",
        "format": "markdown",
        "sha256": "96d790147928aa89981e65ed8d35ddbb0158a2e248b8cc0a64fbae56b641fefd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as pMOS and analyzes the circuit as a conventional CMOS inverter; the golden solution requires recognizing that both devices are NMOS.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 7211,
        "total_tokens": 7575,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6400,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 7211,
        "total_tokens": 7575,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6400,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What it is\n- M1 is an NMOS in common–source.\n- M2 is a PMOS with gate tied to drain (diode‑connected) used as an active load.\n- Output is taken at the common drain node. M2 is always in saturation; M1 can be in cut‑off, saturation, or triode.\n\nAssumptions for hand analysis: long‑channel, neglect body effect and channel‑length modulation unless stated.\n\nDC (large‑signal) transfer Vout(Vin)\n\n1) Vin ≤ VTN (M1 off)\n- I ≈ 0, M2 off, Vout ≈ VDD.\n\n2) VTN < Vin < Vin,crit (both M1 and M2 in saturation)\n- ID1 = ½βn(Vin − VTN)^2, ID2 = ½βp(VDD − Vout − |VTP|)^2, set ID1 = ID2:\n  Vout = VDD − |VTP| − √(βn/βp)(Vin − VTN)\n- Slope in this region is constant: dVout/dVin = −√(βn/βp).\n- Boundary to triode when Vout = Vin − VTN ⇒\n  Vin,crit = VTN + (VDD − |VTP|)/(1 + √(βn/βp))\n  Vout,crit = (VDD − |VTP|)/(1 + √(βn/βp))\n\n3) Vin ≥ Vin,crit (M1 in triode, M2 still saturation)\n- ID1 = βn[(Vin − VTN)Vout − ½Vout^2]\n- ID2 = ½βp(VDD − Vout − |VTP|)^2\n- Solve ID1 = ID2 for Vout. For large Vin (so Vout is small),\n  Vout ≈ [βp (VDD − |VTP|)^2] / [2βn (Vin − VTN)]\n  → tends toward 0 as Vin increases, but never exactly zero.\n\nStatic current and power\n- For Vin low: almost zero current (both devices off).\n- For Vin high: current ≈ ID2 ≈ ½βp(VDD − |VTP|)^2 (since Vout ≈ 0), so\n  Pstatic ≈ VDD · ½βp(VDD − |VTP|)^2.\n  This stage therefore dissipates static power for logic “0”.\n\nSmall‑signal gain about a bias point\n- With supply treated as AC ground, the diode‑connected PMOS presents a small‑signal conductance gL = gm2 + gds2 ≈ gm2.\n- Midband gain:\n  Av = vout/vin ≈ −gm1 / (gm2 + gds1 + gds2) ≈ −gm1/gm2\n- In the sat–sat region (long‑channel), gm1/gm2 = √(βn/βp), so\n  Av ≈ −√(βn/βp) and equals the slope of the linear part of the VTC above.\n\nKey points\n- This is a common‑source stage with a diode‑connected PMOS load (saturated‑load inverter).\n- M2 is always in saturation; M1 transitions from cut‑off → saturation → triode as Vin increases.\n- VTC is piecewise: flat at VDD, then linear with slope −√(βn/βp), then curved toward 0 V.\n- Nonzero static current for logic “0”; gain magnitude ≈ gm1/gm2 (often < 1 unless M2 is made weak).",
        "format": "markdown",
        "sha256": "98a20a09317a557a106a09a46e8951512de900a2f5e8d257d3d6c818686110a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including both devices’ output conductances: −gm1/(gm2 + gds1 + gds2).",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8292,
        "total_tokens": 8936,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7488,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8292,
        "total_tokens": 8936,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7488,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What it is\n- M1 is an NMOS common–source device whose source is at ground and gate is Vin.\n- M2 is a PMOS with gate and drain shorted (diode‑connected) to the output and source at VDD. It acts as a nonlinear pull‑up load.\n- This is the classic NMOS inverter with a diode‑connected PMOS load (also a low‑gain analog stage with an active load).\n\nDC behavior (long‑channel model, ignore body effect and channel‑length modulation)\nLet βn=μnCox(W/L)1, βp=μpCox(W/L)2, VTN>0, VTP<0 (use |VTP| where needed). Define Vout=V.\n\n1) Vin ≤ VTN\n- M1 off. M2 off because V ≈ VDD.\n- Vout ≈ VDD, no static current.\n\n2) Vin > VTN\n- Both transistors conduct and a DC current flows from VDD through M2 to ground through M1.\n- M2 is always in saturation when on (it is diode‑connected).\n- M1 region depends on V.\n\nM1 in saturation (V ≥ Vin − VTN):\nId1 = 0.5 βn (Vin − VTN)^2\nId2 = 0.5 βp (VDD − V − |VTP|)^2\nEquating currents gives\nVout = VDD − |VTP| − sqrt(βn/βp) (Vin − VTN)\nThis holds while Vin − VTN ≤ (VDD − |VTP|) / (1 + sqrt(βn/βp)).\n\nM1 in triode (V < Vin − VTN):\nId1 = βn[(Vin − VTN)V − V^2/2]\nId2 = 0.5 βp (VDD − V − |VTP|)^2\nSolve βn[(Vin − VTN)V − V^2/2] = 0.5 βp (VDD − V − |VTP|)^2 for Vout.\n\nUseful special points\n- Switching point (Vin = Vout = VM). Both devices are in saturation, so\n  VM = [ VTN + sqrt(βp/βn) (VDD − |VTP|) ] / [ 1 + sqrt(βp/βn) ].\n- Low output with Vin = VDD (M1 in triode). A handy approximation when Vout is small:\n  VOL ≈ [βp (VDD − |VTP|)^2] / [2 βn (VDD − VTN)].\n- High output: VOH ≈ VDD.\n\nSmall‑signal (around any bias point where both are on)\n- M2 (diode‑connected) presents r2 ≈ 1/gm2 || ro2; often 1/gm2 dominates.\n- Voltage gain A_v ≈ −gm1 (ro1 || ro2 || 1/gm2). If ro’s are large,\n  A_v ≈ −gm1/gm2 ≈ −sqrt(βn/βp) (because both devices carry the same DC current).\n- Input resistance ≈ ∞ (MOS gate). Output resistance ≈ ro1 || ro2 || 1/gm2.\n\nDigital properties\n- It inverts, but is ratioed: VOL depends on the βn/βp ratio.\n- Static power is near zero for Vin low; finite for Vin high: Pstat ≈ VDD · Id2(V=VOL).\n- Output is not perfectly rail‑to‑rail because VOL > 0.\n\nSummary\nThe circuit is an inverter (or a common‑source amplifier) using a diode‑connected PMOS as an active pull‑up. Its transfer characteristic is obtained by equating the NMOS and PMOS currents; the switching threshold is VM as given above, VOH ≈ VDD, and VOL depends on the strength ratio βn/βp, with static current flowing when the output is low.",
        "format": "markdown",
        "sha256": "76e3a97d6b68daebbe3b1712f361074c53619ade02e2c65faa74794d8c23ac2d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both devices’ output resistances, reducing to −gm1/gm2 when they are large. This meets the full-credit rule.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8105,
        "total_tokens": 8749,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7232,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8105,
        "total_tokens": 8749,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7232,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Circuit identification\n- M1 is an nMOS with source at ground; M2 is a pMOS whose gate is shorted to its drain (a diode‑connected load) and whose source is at VDD. The output is the common drain node. This is a common‑source stage (or ratioed inverter) with a diode‑connected pMOS load.\n\nAssumptions for hand analysis\n- Long‑channel model, body effect and channel‑length modulation neglected.\n- Define βn = μnCox(W/L)1, βp = μpCox(W/L)2, Vtn > 0, Vtp < 0, |Vtp| ≡ −Vtp.\n- M2, being diode‑connected, is either off or in saturation.\n\nDC transfer (Vout versus Vin)\n1) Vin ≤ Vtn (M1 off)\n   - Vout ≈ VDD (M2 turns off as Vout → VDD). Static current ≈ 0.\n\n2) Vtn < Vin < Vb (both M1 and M2 in saturation)\n   - Equal currents: (βn/2)(Vin − Vtn)^2 = (βp/2)(VDD − |Vtp| − Vout)^2.\n   - Output: Vout = VDD − |Vtp| − √(βn/βp) (Vin − Vtn).\n   - Slope in this region: dVout/dVin = −√(βn/βp).\n\n   Boundary to region 3 (where M1 just leaves saturation) occurs when Vout = Vin − Vtn:\n   - Let r = √(βp/βn). Then Vin at the boundary is\n     Vb = Vtn + [ r/(1 + r) ] (VDD − |Vtp|),\n     and Vout at the boundary is Vb − Vtn.\n\n3) Vin ≥ Vb (M1 in triode, M2 in saturation)\n   - Current equality gives\n     βn[(Vin − Vtn)Vout − ½ Vout^2] = (βp/2)(VDD − |Vtp| − Vout)^2.\n   - The physical solution (0 ≤ Vout ≤ VDD) of this quadratic gives the output.\n   - For large Vin, Vout becomes small and a useful approximation is\n     Vout ≈ [βp/(2βn)] (VDD − |Vtp|)^2 / (Vin − Vtn).\n\nNotes and small‑signal view\n- In region 2 the diode‑connected pMOS presents a small‑signal resistance ≈ 1/gm2, so the gain is\n  Av ≈ −gm1/gm2 = −√(βn/βp), matching the slope above.\n- The circuit behaves as an inverter but is “ratioed”: the low output is not rail‑to‑rail and depends on the β ratio. Unlike CMOS, it draws static current whenever M1 conducts (region 2 and 3).\n\nKey takeaways\n- Vout ≈ VDD for small Vin; it decreases roughly linearly with Vin while both devices are saturated; for large Vin, Vout approaches a small value set by the β ratio and Vin (never exactly 0 without an infinitely strong M1).",
        "format": "markdown",
        "sha256": "eca3c1fddbc48fdd08c03317e53b7948d1677b2d4e946a340fa72dc9b02bb972"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain −gm1/gm2. The additional large-signal analysis is consistent with the stated idealized assumptions and does not undermine the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9726,
        "total_tokens": 10370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9024,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9726,
        "total_tokens": 10370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9024,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: it is an NMOS source follower (common–drain stage) biased with a bottom NMOS current sink. The output follows the input but is lower by roughly one VGS of M2; the bottom device sets the current and hence the VGS of M2. The stage has near‑unity gain but cannot swing to the rails.\n\nDetails\n\n- M2: NMOS with drain at VDD, gate driven by Vin, source = Vout → source follower.\n- M1: NMOS to ground biased at a fixed gate voltage (in the drawing it is tied to a constant value), acting as a current sink IBIAS.\n\nDC behavior (ignore channel‑length modulation for first order):\n- For Vin ≤ Vth2, M2 is off → Vout ≈ 0 (pulled down by M1).\n- For Vin > Vth2, M2 turns on. Current through M2 equals the sink current IBIAS set by M1, so the overdrive of M2 is fixed at\n  Vov2 = sqrt(2·IBIAS/kn2)\n  and the output is approximately\n  Vout ≈ Vin − Vth2 − Vov2.\n  Including body effect of M2,\n  Vth2 = Vth0 + γ(√(2ϕF + VSB) − √(2ϕF)), with VSB = Vout.\n\nOutput swing limits:\n- Upper limit (keeping M2 in saturation): Vout,max ≈ VDD − Vov2.\n- Lower limit (keeping M1 in saturation): Vout,min ≈ VDS1(sat) ≈ Vov1, where Vov1 = VGS1 − Vth1 (set by the bias on M1).\nThus the stage is not rail‑to‑rail; even with large Vin, Vout stays ≈ VDD − Vov2.\n\nSmall‑signal:\n- Gain Av = vout/vin ≈ gm2 / (gm2 + gmb2 + gds2 + gds1).\n  With a good current source (gds1 ≈ 0) and ignoring gds2, Av ≈ gm2/(gm2 + gmb2) ≲ 1 (typically 0.8–0.98).\n- Output resistance Rout ≈ 1/(gm2 + gmb2 + gds2) ∥ ro1; with an ideal current source it is ≈ 1/(gm2 + gmb2).\n- Input resistance is very high (MOS gate).\n\nInterpretation:\n- The circuit is a unity‑gain buffer/level shifter. Vout follows Vin but is offset down by about Vth2 + Vov2; body effect increases the offset as Vout rises.",
        "format": "markdown",
        "sha256": "1fcf5db97792bb6c411b53a8cb23d0404ef2cf773fc19e691c46dbae2b6a2a70"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies both devices and the topology. The circuit uses two PMOS devices: M2 is a common-source input device and M1 is a diode-connected PMOS load, giving approximately Av = -gm2/gm1—not an NMOS source follower.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9502,
        "total_tokens": 10146,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8896,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9502,
        "total_tokens": 10146,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8896,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "- M2 is a PMOS from VDD to the output node. Its gate is Vin.\n- M1 is an NMOS from the output node to ground, but its gate is tied to ground, so VGS1 = 0 → M1 is OFF (except for leakage and its body‑diode to ground). Practically, M1 only contributes parasitic C and clamps Vout if it tries to go below 0 V.\n\nOperation versus Vin:\n- Vin ≈ 0: PMOS M2 turns ON (VSG2 ≈ VDD > |VTP|). With no DC path to ground, the node charges to Vout ≈ VDD (drop ≈ 0 at DC since I ≈ 0).\n- Vin ≈ VDD: PMOS M2 turns OFF (VSG2 ≈ 0). M1 is also OFF, so the output is high‑impedance (floating). The node simply holds its previous charge and will drift only by leakage. The body diodes clamp Vout to the range 0 ≤ Vout ≤ VDD.\n\nSo this is not a CMOS inverter. It’s effectively a PMOS pass/precharge device that pulls Vout high when Vin is low and leaves Vout floating (Z) when Vin is high.",
        "format": "markdown",
        "sha256": "377e990345f238942196c1dcc7622663cb3e96346167d57cdb23008fd4a490fb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS that is off. It is a diode-connected PMOS load to ground, so the output is not floating and the central gm/gm gain mechanism is missed.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 6580,
        "total_tokens": 7224,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 6580,
        "total_tokens": 7224,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "- What it is:\n  - M2 is a pMOS with source at VDD, drain at Vout, and gate driven by Vin.\n  - M1 is an nMOS whose drain is at Vout, source at ground, and gate tied to ground (Vgs1 = 0), so it is always off. Its body diode points from ground to Vout and only prevents Vout from going negative.\n\n- Operation (assuming |VTP| is the pMOS threshold magnitude):\n  - If Vin is low enough so that VDD − Vin > |VTP|, M2 turns on. Because there is no DC path to ground (M1 is off), the output node is charged to VDD. In steady state I ≈ 0, so Vout ≈ VDD. The charging time constant is roughly Ron,p(Vin) × Cload, with Ron,p ≈ 1/[μp Cox (W/L)2 (VDD − Vin − |VTP|)] while the node is charging.\n  - If Vin is high (Vin ≳ VDD − |VTP|), M2 turns off. With M1 off as well, the output becomes high‑impedance (floating). It will hold its previous value and slowly drift due to leakage. The nMOS body diode only clamps Vout ≥ 0 V; it does not discharge a positive Vout.\n\n- Consequences:\n  - This is not a static logic gate. It is a conditional pull‑up or “precharge” device: it pulls Vout to VDD when Vin is low and otherwise leaves the node floating.\n  - There is no defined logic “0” path; to make a proper CMOS inverter you would need M1’s gate driven by Vin (not grounded).\n  - Static power is essentially zero; dynamic power is consumed only while charging the load capacitance through M2.\n\nIn short: the circuit is a pMOS-controlled pull‑up to VDD with an off nMOS to ground; it precharges Vout to VDD when Vin is low and leaves it floating when Vin is high, with the nMOS diode merely preventing negative voltages at Vout.",
        "format": "markdown",
        "sha256": "a7b8b1a17c07f45147416106cf514ef4162595750e3b7e05dac99f8f5a3d0aa0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an off nMOS, but it is a diode-connected PMOS load to ground. This misses the dominant gm/gm mechanism and incorrectly concludes that the output is floating or simply precharged to VDD.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8427,
        "total_tokens": 9071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7936,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8427,
        "total_tokens": 9071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7936,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Rout is the small-signal resistance seen at the output node (bottom of M1).  \nWith VDD, Vb1 and Vb2 at ac ground and neglecting body effect, the two transistors form a cascode.  \nUsing the small‑signal model and KCL at node X:\n\n(vx − vo)/ro2 + vx/ro1 + gm2·vx = 0  ⇒  vx = vo·(1/ro2)/(gm2 + 1/ro1 + 1/ro2)\n\nThe current drawn from the output is io = (vo − vx)/ro2 − gm2·vx, which gives\n\nRout = vo/io = ro1 + ro2 + gm2·ro1·ro2.\n\nFor gm2·ro2 >> 1, Rout ≈ gm2·ro1·ro2.",
        "format": "markdown",
        "sha256": "dec46cf3f023dc89a3b558829fc45d4f1dfb28963ad5d00f2563065e63e26e26"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer assigns the cascode role to M2 and uses gm2 in Rout; the actual cascode device is M1, so the gain factor must be gm1 (with body effect optionally included).",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 642,
        "output_tokens": 15562,
        "total_tokens": 16204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15360,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 642,
        "output_tokens": 15562,
        "total_tokens": 16204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15360,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Rout of the stacked transistors (with Vb1, Vb2 and VDD as ac grounds) is the output resistance seen at the bottom node.  \nFor the cascode pair M1 (bottom) and M2 (top), neglecting body effect:\n\nRout = ro1(1 + gm2 ro2) + ro2 = ro1 + ro2 + gm2 ro1 ro2\n\nIf gm2 ro2 >> 1, then Rout ≈ gm2 ro1 ro2.",
        "format": "markdown",
        "sha256": "0bf41f6c8580a7b5005f811541c187868a47825874b2ef6369f9d84033e7b87e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer uses the cascode output-resistance form, but assigns the cascode role to M2 and uses gm2. In this circuit M1 is the cascode device, so the dominant factor is gm1.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 642,
        "output_tokens": 22580,
        "total_tokens": 23222,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 642,
        "output_tokens": 22580,
        "total_tokens": 23222,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Rout is the small‑signal resistance seen at the lower node (source of M1).  \nWith VDD, Vb1 and Vb2 being ac grounds, use small‑signal models (gm1, ro1 for M1 and gm2, ro2 for M2).  \nWriting KCL at node X and at the output node and solving for vout/it gives\n\nRout = (go1 + go2 + gm2) / [ (gm1 + go1)(go2 + gm2) ],\n\nwhere goi = 1/roi.\n\nIf gm2 ≫ go1, go2 and gm1 ro1 ≫ 1, this reduces to Rout ≈ 1/gm1.",
        "format": "markdown",
        "sha256": "31013db7da4263a1d236944ae27e2f8930c4901908eab17f1e669fd6551eee3d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It measures the resistance at the wrong node and gives a result near 1/gm1, rather than the cascode output resistance of approximately gm1·ro1·ro2.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 642,
        "output_tokens": 11677,
        "total_tokens": 12319,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11520,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 642,
        "output_tokens": 11677,
        "total_tokens": 12319,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11520,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M2 is a pMOS with source at VDD and drain at node X.  \nA pMOS is in saturation when VSD ≥ VSG − |VT|.\n\nFor M2:\n- VSD2 = VDD − VX\n- VSG2 = VDD − Vb2\n\nThus the condition becomes:\nVDD − VX ≥ (VDD − Vb2) − |VTp2|  ⇒  VX ≤ Vb2 + |VTp2|.\n\nEquivalently, with VOV2 = VSG2 − |VTp2|, VX ≤ VDD − VOV2.  \nChoose the bias so that node X stays below this value (and, if needed, restrict Vout so that both devices stay saturated).",
        "format": "markdown",
        "sha256": "89b164541416f3c414628f61db2fd4769111d5597e0ff675b7e16eafa01c1eae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Correctly identifies M2 as a PMOS and derives its saturation condition, but treats Vb2 as the control and misses that VX is set mainly by Vb1, which is needed to give the relevant bias condition.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 6090,
        "total_tokens": 6740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5888,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 6090,
        "total_tokens": 6740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5888,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume M2 is an nMOS.  \nFor M2 to operate in saturation,\n\n1) It must be on: VGS2 = Vb2 − VX > VTn ⇒ VX < Vb2 − VTn.  \n2) Saturation condition: VDS2 ≥ VGS2 − VTn.\n\nWith D2 at VDD and S2 at node X,\nVDS2 = VDD − VX and VGS2 − VTn = Vb2 − VX − VTn,\nso the saturation inequality becomes\n\nVDD − VX ≥ Vb2 − VX − VTn  ⇒  VDD ≥ Vb2 − VTn.\n\nTherefore, by biasing the gate of M2 so that Vb2 is at least a threshold below VDD (and keeping VX < Vb2 − VTn so M2 is on), M2 is guaranteed to stay in saturation.",
        "format": "markdown",
        "sha256": "80aa2b2611c0adb82107f3f0ef00d5bded0fc8cc173583c600ccf21c728d325b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The figure uses PMOS devices, but the answer analyzes M2 as an NMOS and gives an irrelevant bias condition. It misses that VX is set by Vb1; its generic NMOS saturation reasoning earns only minimal credit.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 11099,
        "total_tokens": 11749,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 11099,
        "total_tokens": 11749,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume M2 is the PMOS device whose source is tied to VDD.  \nFor a PMOS to be in saturation we need\n\nVSD ≥ VSG − |VTP|.\n\nIn the circuit\n- VSD2 = VDD − VX\n- VSG2 = VDD − Vb2\n\nHence\nVDD − VX ≥ (VDD − Vb2) − |VTP|\n⇒ VX ≤ Vb2 + |VTP|.\n\nSo choose the bias Vb2 (and the allowed range of node X) so that VX never exceeds Vb2 + |VTP|, and also keep the device on: VDD − Vb2 ≥ |VTP|.",
        "format": "markdown",
        "sha256": "e0f3c2fc2e322ed4c461d56ef436cc8d446c82177c677cff97a4ff2598e64564"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Correctly states M2's PMOS saturation condition, but treats Vb2 as the control and does not relate VX to Vb1, which sets VX through M1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 8737,
        "total_tokens": 9387,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8576,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 8737,
        "total_tokens": 9387,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8576,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a single–ended NMOS common–source stage with a cascode device (M2) and a current‑source load I1. It is often called a “cascode amplifier”.\n\n1) DC (large‑signal) operation\n- The branch current is set by the load: ID ≈ I1. In steady state ID1 = ID2 = I1.\n- Define βk = μnCox(W/L)k and the overdrive Vov,k = VGS,k − VT,k.\n  • For M1: I1 = ½β1Vov,1^2 → Vov,1 = √(2I1/β1) and the required input bias is Vin,DC = VT1 + Vov,1.\n  • For M2: I1 = ½β2Vov,2^2 → Vov,2 = √(2I1/β2).\n     Since VG2 = Vb1, the intermediate node is\n       VX = Vb1 − VT2 − Vov,2  (approximately constant for fixed I1 and Vb1).\n- Saturation (for high gain):\n  • M1: VX ≥ Vov,1.\n  • M2: Vout ≥ VX + Vov,2.\n  • Current source compliance: VDD − Vout ≥ Vheadroom(I1).\n  Hence Vout,min ≈ VX + Vov,2 (plus I1 source headroom), and Vout,max ≈ VDD − Vheadroom(I1).\n\n2) Small‑signal behavior\n- Input resistance Rin ≈ ∞ (MOS gate).\n- The cascode action keeps node X almost fixed. With long‑channel devices and ignoring g0 terms:\n    vx ≈ (gm1/gm2) vin  (common‑gate input resistance at the source of M2 ≈ 1/gm2).\n  With output‑conductances included:\n    vx ≈ gm1 vin / (gm2 + go1 + go2 + goI).\n- Output resistance (looking into the drain of M2; goI = 1/roI is the current‑source output conductance):\n    Let r2' = ro2 || roI.\n    Rout ≈ r2' + (1 + gm2 r2') ro1\n          ≈ gm2 ro1 r2'  when gm2 r2' ≫ 1.\n- Voltage gain\n    Av = vout/vin ≈ −gm1 Rout\n       ≈ −gm1 [ r2' + (1 + gm2 r2') ro1 ]\n       ≈ −gm1 gm2 ro1 r2'  (dominant term).\n  With an ideal current source (roI → ∞), r2' → ro2, so Av ≈ −gm1 gm2 ro1 ro2.\n\n3) Intuition/remarks\n- M2 (common‑gate) “regulates” node X, greatly increasing the output resistance seen at the drain of M1; this boosts gain.\n- Choose Vb1 so that VX ≈ Vov,1 + margin, keeping M1 in saturation across the required output swing.\n- The small‑signal current driven by vin is approximately gm1 vin; the large Rout produced by the cascode turns this into a large voltage gain.",
        "format": "markdown",
        "sha256": "97600677f4c00a9b214f500a3dd716fe184b4a843d280a9ac774a7d52634086a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies M1 as the common-source input NMOS and M2 as the common-gate cascode, and gives the required gain expression, satisfying the explicit full-credit rule. Its claim that node X is nearly fixed is inaccurate for an ideal current-source load, but does not change the score under that rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9961,
        "total_tokens": 10605,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9216,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9961,
        "total_tokens": 10605,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9216,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Circuit identity and bias\n- M1 and M2 are n‑MOSFETs in series. M1 is driven by vin (common‑source), M2 is biased by Vb1 (common‑gate/cascode). The load is a current source I1 to VDD; the output is vout.\n- With M2 in saturation its source (node X) is approximately VX ≈ Vb1 − VTH2 (neglect body effect).\n- Headroom for proper operation (both devices in saturation):\n  - VX ≥ VOV1 = VGS1 − VTH1 (to keep M1 saturated).\n  - VOUT ≥ VX + VOV2 (to keep M2 saturated).\n  - Hence choose Vb1 ≥ VTH2 + VOV1 and ensure VOUT ≥ Vb1 − VTH2 + VOV2.\n\nSmall‑signal analysis (gmk, rok for Mk; gds = 1/ro)\nAssume Vb1 is an ac ground and the current source has small‑signal resistance roI.\n\n1) Relations between small‑signal node voltages:\n- KCL at vout: (gdsI + gds2)vout − (gds2 + gm2)vx = 0\n  ⇒ vout = [(gds2 + gm2)/(gdsI + gds2)] vx.\n\n- KCL at x: (gds1 + gm2 + gds2)vx − gds2 vout + gm1 vin = 0.\n\nSolving gives\n- vx/vin = − gm1 (gdsI + gds2) / [ gds1 gds2 + gdsI (gds1 + gm2 + gds2) ].\n- vout/vin (voltage gain)\n  Av = − gm1 (gm2 + gds2) / [ gds1 gds2 + gdsI (gds1 + gm2 + gds2) ].\n\nImportant limits\n- Ideal current source (roI → ∞, gdsI → 0):\n  vx = − gm1 ro1 vin,\n  vout = (1 + gm2 ro2) vx,\n  Av = − gm1 ro1 (1 + gm2 ro2).\n- If roI is the dominant finite resistance (roI ≪ ro1, ro2, gm2 ro1 ro2):\n  Av ≈ − gm1 roI (gain limited by the load).\n\nOutput resistance\n- With vin = 0, the output resistance of the M1–M2 stack is\n  Rstack = ro1 + ro2 + gm2 ro1 ro2.\n- Overall output resistance seen at vout is\n  Rout ≈ Rstack || roI.\n\nOther notes\n- Input resistance at vin is very high (MOS gate).\n- The cascode M2 isolates node X from changes at vout; VX is mainly set by Vb1 (for vout variations), while vin modulates the current through M1 which is converted to voltage at vout by the large Rout.\n- Minimum output voltage for linear operation: Vout,min ≈ (Vb1 − VTH2) + VOV2.",
        "format": "markdown",
        "sha256": "8c7b2d81adb505db0fffe3b393d7860513a47917366654ded2867198f5ab5cb1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. This meets the golden solution’s full-credit rule; the ancillary bias/headroom imprecision does not change the core answer.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 14863,
        "total_tokens": 15507,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14144,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 14863,
        "total_tokens": 15507,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14144,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Circuit type and operation\n- NMOS cascode (M1 is common‑source, M2 is common‑gate) loaded by a current source I1. vout is taken at the drain of M2.  \n- DC: ID ≈ I1. Choose Vb1 so that both MOSFETs are in saturation:\n  - M1: Vx ≥ VOV1 (= VGS1 − VTH1)\n  - M2: Vout − Vx ≥ VOV2 and Vb1 − Vx ≥ VTH2\n  - With a given I1 and M2 sizing, Vx ≈ Vb1 − VOV2 (almost constant).\n\nSmall‑signal (midband) results\nLet gm1, ro1 be for M1; gm2, ro2 for M2; rI be the small‑signal resistance of I1 (∞ for an ideal source).\n\n- Node X movement (general, including finite rI):\n  vx = [(1/ro2 + 1/rI)/(1/ro2 + gm2)] · vo.\n  For an ideal current source (rI → ∞): vx/vo = 1/(1 + gm2 ro2) ≪ 1.\n\n- Voltage gain vo/vin (exact with ro’s and rI):\n  Av = vo/vin = − gm1 rI ( r1 + gm2 r1 r2 ) / ( rI + r2 + r1 + gm2 r1 r2 ),\n  where r1 = ro1 and r2 = ro2.\n  Special cases:\n  - Ideal current source (rI → ∞):\n      Av ≈ − gm1 ro1 (1 + gm2 ro2) ≈ − gm1 ro1 gm2 ro2 if gm2 ro2 ≫ 1.\n  - Often approximated as Av ≈ − gm1 (Rout,stack || rI) with Rout,stack ≈ ro2 + ro1(1 + gm2 ro2).\n\n- Output resistance (set vin = 0):\n  Rout,stack ≈ ro2 + ro1(1 + gm2 ro2) ≈ gm2 ro1 ro2 (if gm2 ro2 ≫ 1).\n  With the load current source: Rout,total ≈ Rout,stack || rI.\n\n- Input resistance: Rin ≈ ∞ (MOS gate).\n\nIntuition\n- M2 (common‑gate) holds node X nearly constant (vx/vo ≈ 1/(1 + gm2 ro2)), which greatly increases the stack’s output resistance and hence the voltage gain, and keeps M1’s VDS almost constant (reduced Miller effect). The overall gain is negative.",
        "format": "markdown",
        "sha256": "4fe288ea4c6d6ce9b9df61e0fb4ab68c7d59758e0de62ac761c7a2f791e11050"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 15263,
        "total_tokens": 15907,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 15263,
        "total_tokens": 15907,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. M1 is a common‑source input device and M2, whose gate is held at a fixed bias Vb1, operates as a common‑gate transistor stacked on top of M1. This CS–CG stack is the defining cascode structure; RD is simply the load.",
        "format": "markdown",
        "sha256": "73951cadf2dfeed7507706a6f8d31d6be0a7d6235c6c044ae33edabe5fe70e57"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower with its drain grounded, not a common-source input device, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 2355,
        "total_tokens": 3003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2240,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 2355,
        "total_tokens": 3003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2240,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. M1 is the input NMOS in common‑source, and M2 is a common‑gate device with its gate fixed at Vb1. This CS–CG stacking keeps M1’s drain nearly constant, raising output resistance and reducing Miller effect. RD is just the load, so it’s a resistively loaded NMOS cascode amplifier.",
        "format": "markdown",
        "sha256": "43d8ddf3fdfd74b03b003e90658fd9b759d8af4b5c178825967bc5663a030d49"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as an NMOS common-source device; M1 is a PMOS source follower, so the cascode resistance boost is absent.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 2376,
        "total_tokens": 3024,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2240,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 2376,
        "total_tokens": 3024,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2240,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. It’s a simple NMOS cascode stage: M1 is the common‑source input device and M2 is a common‑gate transistor biased by Vb1. The upper device isolates M1’s drain (nearly constant Vds), raising output resistance and gain. RD is just a resistive load; its presence doesn’t change the fact that the pair forms a cascode.",
        "format": "markdown",
        "sha256": "624c6fa7a3a6c78e2effadd9eccbd41d77a80c0dc18f3a8cd60e6783da7ecd86"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower with its drain grounded, not a common-source input device, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 2140,
        "total_tokens": 2788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 2140,
        "total_tokens": 2788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect comes from a capacitance that links an input node to a high‑gain output node. If the output swings by −A_v times the input, the input “sees” that capacitor multiplied by roughly (1 + |A_v|).\n\nIn a cascode (CS/CE feeding a CG/CB):\n- The upper common‑gate/base device presents a low impedance at the drain/collector of the input device, so that node is a small‑swing node.\n- More importantly, that node moves in phase with the input (it is partially “bootstrapped”), so the voltage across the input device’s feedback capacitance (Cgd for MOS, Cμ for BJT) changes very little.\n\nQuantitatively, the effective Miller factor for the lower device is 1 − A_gd, where A_gd = V(drain of lower)/V(input). In a plain CS/CE stage A_gd ≈ −A_v is large and negative, giving a big multiplication. In a cascode, 0 ≤ A_gd ≤ 1 (often A_gd ≈ gm1/(gm2 + go1) ≤ 1), so:\n- The factor 1 − A_gd is between 0 and 1 (no “multiplication”; at worst it’s just Cgd itself, at best it’s nearly canceled).\n- Thus Cin ≈ Cgs/Cπ + (unmultiplied or even partially canceled) Cgd/Cμ, instead of Cgs/Cπ + Cgd/Cμ(1 + |A_v|).\n\nNet effect: the cascode isolates the input from the large output swing, drastically reducing the Miller effect, raising the input pole frequency, and improving bandwidth and stability. The upper device’s own Cgd/Cμ affects the output node, not the input.",
        "format": "markdown",
        "sha256": "9b188042920562fadb2efe05ee75f2c7fa114fb58322474de436fb78c36eb17e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the low-impedance, small-swing node in a cascode, but gets the key signal phase and Miller factor wrong. The lower transistor’s drain gain is approximately negative and near −1, so Cgd is multiplied by about 2—not nearly canceled or left unmultiplied as claimed.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 7223,
        "total_tokens": 7242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6784,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 7223,
        "total_tokens": 7242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6784,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "- What causes Miller effect: A capacitance between an input node and a node that has a large, inverted gain relative to the input (e.g., Cgd in a MOSFET, Cμ in a BJT) is “multiplied” at the input by roughly (1 − Av), where Av is the gain from the input node to the other terminal of the capacitor. In a single common-source/emitter stage, Av is large and negative, so 1 − Av ≈ 1 + |Av|, greatly increasing effective input capacitance and reducing bandwidth.\n\n- What the cascode changes: In a cascode (CS/CE feeding a CG/CB), the upper common-gate/base device presents a low input impedance (~1/gm) at the intermediate node (the drain/collector of the input device). This keeps that node’s AC voltage small and/or in phase with the input.\n\n- Mathematical view:\n  - Effective input capacitance contributed by the input device’s gate–drain (base–collector) cap is Cin,gd ≈ Cgd·(1 − Ax), where Ax = vX/vIN is the gain from the input to the input device’s drain/collector (the cascode node).\n  - In a standalone CS/CE, Ax ≈ vOUT/vIN ≈ −g m RD (large, negative) ⇒ big multiplication.\n  - In a cascode, Ax ≈ gm1/(gm2 + gds1) ≈ gm1/gm2 (small, positive, typically ≤ 1) ⇒ 1 − Ax ≤ 1, often much less than 1. The Cgd sees little differential voltage (“bootstrapped”), so its Miller multiplication largely disappears.\n\n- Physical intuition:\n  - The cascode holds the input transistor’s drain/collector at nearly constant AC potential (or makes it follow the input), so the voltage across Cgd/Cμ is small. With little AC voltage across that capacitor, it injects much less current back into the input, so the effective input capacitance is not multiplied.\n  - The large voltage gain now occurs from the cascode node to the final output, but the input device’s Cgd is not connected across those two nodes, so it can’t undergo large Miller multiplication.\n  - The upper device’s own Cgd/Cμ has its gate/base at AC ground, so its Miller effect does not reflect to the input (it contributes to output/high-frequency behavior instead).\n\n- Consequences:\n  - Dramatically reduced effective input capacitance and a higher input pole frequency → wider bandwidth.\n  - The intermediate (cascode) node has a low resistance (~1/gm2), so its capacitances form a high-frequency pole rather than a dominant one.\n\nThat’s why the Miller effect is much less pronounced in a cascode.",
        "format": "markdown",
        "sha256": "699692d5f72f85b2d95b813de7022e2dd9d57d7a921fd5b6c23d5433501ac432"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the cascode’s low-impedance intermediate node and explains why the input transistor’s Cgd has much less Miller multiplication than in a standalone common-source stage. However, it gives the node gain the wrong sign and overstates the reduction: the gain is about −gm1/(gm2+gmb2), often near −1, so the Cgd multiplier is roughly 2 rather than disappearing.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 5227,
        "total_tokens": 5246,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 5227,
        "total_tokens": 5246,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect comes from a capacitance that bridges a device’s input and the node that makes a large, inverted voltage swing (the output). In a single common-source/common-emitter (CS/CE) stage, the gate–drain/base–collector capacitance sees nearly the full gain, so its effective value at the input is multiplied by about 1 + |Av|, severely increasing input capacitance and cutting bandwidth.\n\nIn a cascode (CS/CE feeding a common-gate/common-base stage):\n\n- The upper CG/CB device holds the lower device’s drain/collector at (approximately) a constant AC voltage; that node has very small signal swing and low impedance (~1/gm of the upper device).\n- The relevant gain for Miller multiplication is the gain between the lower device’s input and its drain/collector, not the overall output gain. In a cascode, that local gain is small (often near 0), so the “Miller factor” for the lower device’s Cgd/Cbc is close to 1, not 1 + |Av_total|.\n- Intuitively, the CG/CB device “shields” the input from the large output swing, so the feedback capacitor across the lower device never sees a large changing voltage and cannot feed much current back into the input.\n\nResult: The effective input capacitance becomes roughly Cin ≈ Cgs/Cπ + Cgd/Cbc (with only a small correction), instead of being multiplied by the large stage gain. This is why cascodes have much higher bandwidth and much less pronounced Miller effect than a single CS/CE stage.",
        "format": "markdown",
        "sha256": "b51b8e5c6310448ff244ed37fb5c9c479bf73bd4a1d590934031930902551561"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cascode’s low-impedance intermediate node and the resulting much smaller gain across the lower device’s Cgd, reducing Miller multiplication. Calling that gain near zero slightly overstates the effect, but the golden solution treats this as a minor flaw.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 4043,
        "total_tokens": 4062,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3648,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 4043,
        "total_tokens": 4062,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3648,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume long‑channel MOS, bodies tied to sources, and low‑frequency.\n\nWhat it is\n- A common‑source nMOS amplifier (M2) with a pMOS current‑source load (M1).  \n- M1: pMOS with source at VDD, gate at Vb2.  \n- M2: nMOS with source at Vb1, gate is Vin.  \n- Drains are tied → Vout.\n\nLarge‑signal (DC)\n- Currents (including channel‑length modulation):\n  I1 = (βp/2)(VDD − Vb2 − |VTP|)^2 [1 + λp(VDD − Vout)]\n  I2 = (βn/2)(Vin − Vb1 − VTN)^2 [1 + λn(Vout − Vb1)]\n  KCL at the output: I1 = I2.\n  (If λ → 0, I1 is independent of Vout, so Vout is not set; finite λ fixes Vout.)\n\nOperating‑region limits (both in saturation)\n- For M2 (nMOS): VDS2 ≥ VGS2 − VTN ⇒ Vout ≥ Vin − VTN.\n- For M1 (pMOS): VSD1 ≥ VSG1 − |VTP| ⇒ Vout ≤ Vb2 + |VTP|.\n- Devices on: Vin ≥ Vb1 + VTN and VDD − Vb2 ≥ |VTP|.\n- Thus a feasible input range is Vb1 + VTN ≤ Vin ≤ Vb2 + |VTP| + VTN.\n- Output swing while both remain in saturation:\n  Vout,min ≈ Vin − VTN,   Vout,max ≈ Vb2 + |VTP|.\n\nSmall‑signal (about a bias point)\n- gm2 = 2ID/Vov2, with Vov2 = Vin − Vb1 − VTN and ID the bias current.\n- ro1 = 1/(λp ID), ro2 = 1/(λn ID).\n- Input resistance Rin ≈ ∞ (ignoring gate capacitances).\n- Output resistance Rout = ro1 || ro2 = 1/(gds1 + gds2).\n- Low‑frequency voltage gain:\n  Av = vout/vin ≈ −gm2 (ro1 || ro2) = −gm2/(gds1 + gds2).\n  (Increasing Vin increases ID2 and pulls Vout down → negative gain.)\n\nSummary: This is a single‑stage CMOS voltage amplifier. Vb1 and Vb2 set the bias current and level shift; the small‑signal gain is −gm2(ro1 || ro2), and the allowed output swing is between Vin − VTN and Vb2 + |VTP| while both transistors remain in saturation.",
        "format": "markdown",
        "sha256": "ac53a8d4dceb39394c5053ad1100b5890ee03363b0019c71e73baba8651ea946"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2's gate and identifies the stage as common-source. The figure is a common-gate stage with Vin at M2's source, so the gain polarity and input-resistance analysis are also wrong.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8660,
        "total_tokens": 9304,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8660,
        "total_tokens": 9304,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What it is\n- M2 is an NMOS used as a common‑source device.\n- M1 is a PMOS biased by Vb2 and used as an active (current‑source) load from VDD.\n- The output is taken at the common drain node; the source of M2 is fixed at Vb1. With VDD, Vb1 and Vb2 regarded as stiff DC biases, they are AC grounds.\n\nLarge‑signal (DC) conditions\nAssume long‑channel equations and saturation operation.\n\n- NMOS on: VGS2 = Vin − Vb1 > VTN.\n- PMOS on: VSG1 = VDD − Vb2 > |VTP|.\n\nSaturation constraints:\n- M2: VDS2 ≥ VOV2 ⇒ Vout − Vb1 ≥ (Vin − Vb1 − VTN) ⇒ Vout ≥ Vin − VTN.\n- M1: VSD1 ≥ VOV1 ⇒ VDD − Vout ≥ (VDD − Vb2 − |VTP|) ⇒ Vout ≤ Vb2 + |VTP|.\n\nHence allowable output swing (while both devices stay in saturation):\nVb1 + VOV2 ≤ Vout ≤ Vb2 + |VTP|, where VOV2 = Vin − Vb1 − VTN.\n\nCurrents (in saturation):\nId1 ≈ (βp/2)(VDD − Vb2 − |VTP|)^2(1 + λp(VDD − Vout))\nId2 ≈ (βn/2)(Vin − Vb1 − VTN)^2(1 + λn(Vout − Vb1))\nAt DC, Id1 = Id2 sets the operating point (Vout vs. Vin). Without channel‑length modulation (λ → 0), M1 is an ideal current source and Vout is weakly defined by ro; with λ ≠ 0 the intersection fixes Vout.\n\nSmall‑signal (AC) analysis\nBecause VDD, Vb1 and Vb2 are AC grounds:\n- M1 contributes only its output resistance ro1 to ground (vgs1 is fixed).\n- M2 provides transconductance gm2 with output resistance ro2 to ground.\n\nKCL at the output gives the gain:\nAv = vout/vin ≈ −gm2 (ro1 || ro2)\n\nInput and output resistances:\n- Rin ≈ ∞ (MOS gate).\n- Rout (with vin = 0) ≈ ro1 || ro2.\n\nWith gm2 = 2Id/VOV2 and roi ≈ 1/(λi Id):\nAv ≈ −gm2 (ro1 || ro2) ≈ − 2 / [(λn + λp) VOV2]\n\nKey points\n- The stage is an inverting common‑source amplifier with a PMOS current‑source load.\n- Gain magnitude is set mainly by gm2 and the parallel output resistances; input resistance is very large.\n- Output swing is limited from below by the NMOS overdrive and from above by Vb2 + |VTP| (to keep M1 in saturation).",
        "format": "markdown",
        "sha256": "ddaf1e35df593d9993b34dcc6bc77c1a31e28883d19c07d4069fae112fb45a97"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and treats the circuit as an inverting common-source stage. The actual circuit is common-gate, with Vin at M2’s source, so its gain is non-inverting and its input resistance is low.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8374,
        "total_tokens": 9018,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7680,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8374,
        "total_tokens": 9018,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7680,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What it is\n- M1 is a pMOS biased by Vb2 and connected to VDD. With its gate fixed, it behaves as an approximately constant‑current load.\n- M2 is an nMOS whose source is fixed by Vb1; the input Vin drives its gate.\n- The pair is a common‑source stage with a pMOS current‑source load.\n\nLarge‑signal (DC) relations\nLet βn=μnCox(W/L)2 and βp=μpCox(W/L)1. In saturation (ignoring body effect):\n- M1 current: I1 ≃ (1/2)βp(VSG1−|VTP|)^2(1+λpVSD1), with VSG1=VDD−Vb2, VSD1=VDD−Vout.\n- M2 current: I2 ≃ (1/2)βn(VGS2−VTN)^2(1+λnVDS2), with VGS2=Vin−Vb1, VDS2=Vout−Vb1.\n\nAt the output node I1 = I2. With channel‑length modulation included (λp, λn ≠ 0) the quiescent Vout is\nVout ≃ [A − B + AλpVDD + BλnVb1]/(Aλp + Bλn),\nwhere A=(1/2)βp(VDD−Vb2−|VTP|)^2 and B=(1/2)βn(Vin−Vb1−VTN)^2.\nIf λp=λn=0 the DC value of Vout is not fixed (two ideal current sources meet), so ro is what sets Vout.\n\nOperating‑region constraints\n- M1 in saturation: VSD1 ≥ VSG1−|VTP| ⇒ Vout ≤ Vb2 + |VTP|.\n- M2 in saturation: VDS2 ≥ VGS2−VTN ⇒ Vout ≥ Vin − VTN.\n- For both devices to be in saturation and the stage to be “linear,” an input range that allows an overlap must hold:\n  Vb1 + VTN ≤ Vin ≤ Vb2 + |VTP| + VTN.\n- If Vin ≤ Vb1+VTN, M2 is off and Vout is pulled high (≈ VDD).\n- If Vin is too large so that Vin − VTN > Vb2 + |VTP|, M2 cannot remain in saturation; Vout is driven low and the stage saturates.\n\nSmall‑signal (around a bias point with both devices in saturation)\n- Input resistance Rin ≈ ∞.\n- Output resistance Rout ≈ ro1 || ro2 (ro1 of M1 to VDD in parallel with ro2 of M2 to Vb1).\n- Small‑signal voltage gain:\n  Av = ∂vout/∂vin ≈ −gm2 (ro1 || ro2).\n  (Gate of M1 is at AC ground, so gm1 does not contribute; only its ro1 acts as the load.)\n- Transconductance to the output node: gout,in ≈ gm2.\n- To increase |Av|: raise gm2 (more bias current or larger (W/L)2) and/or increase ro1, ro2 (longer L, cascoding).\n\nOutput swing limits\n- Upper limit set by M1 saturation: Vout,max ≈ min(VDD, Vb2 + |VTP|).\n- Lower limit set by M2 saturation: Vout,min ≈ Vin − VTN (edge of M2 saturation); driving lower forces M2 into triode and the stage clips.\n\nIn short: the circuit is a common‑source NMOS amplifier loaded by a biased pMOS current source. Its midband gain is approximately −gm2 times the parallel combination of the two output resistances, and its valid linear input/output ranges are bounded by the saturation conditions above.",
        "format": "markdown",
        "sha256": "53a244c6f66e82df57d5a84cc9722e4252c0568629654478dede483af8ca5ca5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and identifies a common-source stage, contradicting the essential common-gate topology where Vin is applied at M2’s source. The golden solution explicitly assigns 0 for this error.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8538,
        "total_tokens": 9182,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7680,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8538,
        "total_tokens": 9182,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7680,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Two.\n\nReason: Only two independent dynamic nodes exist — the gate node after Rs (with CGS and part of CGD) and the output node (loaded by CDB + CDB2 + CGD2 and the other side of CGD). M2’s gate is AC-grounded, so its capacitors just add to the output node capacitance. Thus the transfer function is second order (two poles).",
        "format": "markdown",
        "sha256": "c79d469e7b748e31b3121c339dbc7b68c2c88b687345c9a102e2e4f9826eca20"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent dynamic nodes—the M1 gate and output—and assigns the relevant capacitances to them.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 6798,
        "total_tokens": 7446,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 6798,
        "total_tokens": 7446,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Two poles.\n\nReason: there are only two independent high‑impedance AC nodes with capacitance—the input gate node (CGS) and the output node (Vout, with CDB and CGD2 to ground). The gate–drain capacitor CGD only couples these two nodes and doesn’t add a new state; CDB2 is at AC ground. So the transfer function is second order.",
        "format": "markdown",
        "sha256": "f5c68d802bd369af7b13455688d6659b6f534a5f246e065fe45233a4d81f984f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies two poles from the gate and output nodes, and recognizes that CGD couples them without adding a state. However, CDB2 also loads the output node; saying it is at AC ground misassigns or omits that output capacitance.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 5639,
        "total_tokens": 6287,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 5639,
        "total_tokens": 6287,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Two.\n\nReason: There are two high‑impedance dynamic nodes—the input gate of M1 and the output node (drain of M1/source of M2). Each gives one pole. The other nodes (M2 gate and drain) are at AC ground, and the coupling Cgd between input and output does not create an extra pole (it can introduce a zero).",
        "format": "markdown",
        "sha256": "4998c137f39ed71e10b8da927e109c462e81a63a198d7eecdbce204d8d022fa4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer correctly identifies two poles at the M1 gate and output, and that Cgd does not add another pole. However, it misidentifies M2’s terminals: M2’s source and gate are AC-grounded, while its drain is connected to the output.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 8199,
        "total_tokens": 8847,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8064,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 8199,
        "total_tokens": 8847,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8064,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assumptions\n- Long–channel nMOS, identical M1 and M2, body tied to source, channel‑length modulation neglected.\n- Let β = μnCox(W/L). Threshold = Vt. Define A = Vin − Vt (>0 when on).\n- Node x is the series node between M1 and M2. Id is the drain current (downward).\n\n1) Vin ≤ Vt\n- Both devices off, Id ≈ 0\n- Vout ≈ VDD\n\n2) Vt < Vin and the upper device M2 in saturation (this is the normal “amplifier” region)\n- M1 is in triode, M2 in saturation. Solve\n  Id = β[(A)Vx − 0.5 Vx²]  (M1 triode)\n  Id = 0.5β(A − Vx)²       (M2 sat)\n  ⇒ Vx = (1 − 1/√2)A ≈ 0.293A\n  ⇒ Id = (β/4)A²\n  ⇒ Vout = VDD − RD·Id = VDD − (βRD/4)(Vin − Vt)²\n- Small‑signal transconductance: gm = dId/dVin = (β/2)(Vin − Vt) = ½ of a single saturated nMOS.\n- Midband gain (ignoring ro): Av ≈ −gm RD = −(βRD/2)(Vin − Vt).\n- Valid while M2 remains in saturation, i.e. Vout ≥ A. Using the Vout above,\n  ¼βRD A² + A − VDD ≤ 0\n  ⇒ A ≤ A_B = 2[√(1 + βRD VDD) − 1]/(βRD).\n\n3) Both transistors in triode (occurs for larger Vin so that Vout ≤ A)\n- Eliminate Vx from the two triode equations; one obtains\n  Id = (β/2)[A Vout − 0.5 Vout²].\n- With the load: Id = (VDD − Vout)/RD, hence\n  0.5βRD Vout² − (βRD A + 2)Vout + 2VDD = 0.\n  Choose the smaller root:\n  Vout = [βRD(Vin − Vt) + 2 − √{[βRD(Vin − Vt) + 2]² − 4βRD VDD}]/(βRD).\n- For very large Vin: Vout ≈ 2VDD/[βRD(Vin − Vt) + 2] → 0.\n\nKey points\n- With the two nMOS gates tied together, the pair behaves like a single nMOS but with half the strength while the upper device is saturated: Id = (β/4)(Vin − Vt)² and gm is halved.\n- Transfer is piecewise:\n  • Vin ≤ Vt: Vout = VDD\n  • Vt < Vin ≤ Vt + A_B: Vout = VDD − (βRD/4)(Vin − Vt)²\n  • Vin large (both triode): Vout given by the quadratic above.",
        "format": "markdown",
        "sha256": "847c283d05b8133535b89e55f1218b1a7618511caf9853aba7103b5d3a0b02b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series pair, with M1 in triode and M2 in saturation, and derives an effective strength of β/2. For identical equal-width devices, that is equivalent to an effective channel length of about 2L; the piecewise transfer analysis is consistent with the stated ideal square-law assumptions.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 11622,
        "total_tokens": 12266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 11622,
        "total_tokens": 12266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What it is\n- A resistively loaded NMOS inverter whose pull–down is a stack of two NMOS (M1 at the bottom, M2 on top).  \n- Both gates are tied to Vin. Vout is at the drain of M2 and is pulled up by RD to VDD.\n\nAssumptions used below: long–channel devices, identical M1 and M2 with parameter k = μnCox(W/L), same threshold Vt, body effect and channel‑length modulation neglected.\n\nDC operation (piecewise)\n\n1) Vin ≤ Vt\n- Both transistors are off ⇒ Id ≈ 0, Vout ≈ VDD.\n\n2) Vt < Vin and Vout ≥ Vin − Vt\n- In this part of the transition M2 is in saturation and M1 is in triode.\n- With Vx the node between M1 and M2, equating the two currents gives\n  • Vx = (1 − √2/2)(Vin − Vt) ≈ 0.293(Vin − Vt)  \n  • Id = (k/4)(Vin − Vt)^2\n- Hence the output is\n  • Vout = VDD − RD · Id = VDD − (kRD/4)(Vin − Vt)^2\n- This region is valid while Vout ≥ Vin − Vt, i.e.\n  • Vin − Vt ≤ (2/kRD)[−1 + √(1 + kRD·VDD)]\n\n3) Larger Vin (Vout < Vin − Vt)\n- M2 also enters triode. For Vout ≪ Vin − Vt each MOS behaves like a resistor ≈ 1/[k(Vin − Vt)] so the two in series give\n  • Rpull‑down ≈ 2/[k(Vin − Vt)]\n  • Id ≈ Vout / Rpull‑down = [k(Vin − Vt)/2] Vout\n  • Vout ≈ VDD · [ 2 / (2 + kRD(Vin − Vt)) ]\n- Compared with a single NMOS of the same size, the stack provides about half the pull‑down current (twice the on‑resistance).\n\nSmall‑signal around the main transition (case 2)\n- gm,eq = ∂Id/∂Vin = (k/2)(Vin − Vt) = 0.5 × gm of a single saturated NMOS.\n- Neglecting ro, voltage gain Av ≈ −gm,eq RD = −(kRD/2)(Vin − Vt).\n\nKey takeaways\n- The circuit behaves like a standard NMOS inverter but with a weaker pull‑down path: for most of the transition Id ≈ (k/4)(Vin − Vt)^2 and Vout = VDD − (kRD/4)(Vin − Vt)^2.  \n- At large Vin the effective on‑resistance is about twice that of a single device, so the low output level is higher and the gain is roughly half that of a single‑transistor pull‑down with the same W/L.",
        "format": "markdown",
        "sha256": "4a5278ce7b746b189e558aec382d0fa6e46fcbd63f53de2c72aaab8a0e8de375"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-gate NMOS stack and the lower-triode/upper-saturation operation, with current and resistance results consistent with the weaker pull-down. It does not make the key conclusion explicit that the stack behaves approximately like one NMOS with effective channel length L1 + L2.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 12498,
        "total_tokens": 13142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 12498,
        "total_tokens": 13142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Interpretation\n- Two identical nMOS transistors M1 and M2 are stacked in series. Their gates are tied to Vin. M1’s source is at ground; its drain is node X. M2’s source is node X and its drain is the output node, which is loaded by RD to VDD.\n- We assume long‑channel devices, ignore channel‑length modulation and body effect unless noted.\n\nLarge‑signal (useful operating region)\n- When Vin ≤ VT both transistors are off → I ≈ 0 and Vout ≈ VDD.\n- For VT < Vin and while M2 remains in saturation (Vout ≥ Vin − VT), the pair conducts a current that depends only on Vin. In this region M1 operates in triode and M2 in saturation.\n\nGeneral result (allowing different k1, k2 where k = μnCox(W/L)):\nLet α = Vin − VT (>0). Equating the currents of M1 (triode) and M2 (saturation) gives\n• Node X voltage: VX = α [1 − √(k1/(k1 + k2))].\n• Drain current: ID = (k1 k2 / (2 (k1 + k2))) α^2.\n\nFor identical devices (k1 = k2 = k):\n• VX = (1 − 1/√2)(Vin − VT) ≈ 0.293 (Vin − VT).\n• ID = (k/4)(Vin − VT)^2  (exactly one‑half the current of a single device with the same Vin in saturation).\n\nOutput voltage and small‑signal gain\n- Vout = VDD − RD · ID.\n- Small‑signal transconductance gm,eq = dID/dVin = (k1 k2/(k1 + k2)) (Vin − VT).\n- Small‑signal voltage gain (ignoring ro): Av ≈ −gm,eq RD.\n  For identical devices: Av ≈ −(k/2)(Vin − VT) RD.\n\nRange of validity (headroom)\n- The formulas above are valid as long as M2 stays in saturation:\n  Vout ≥ Vin − VT.\n  Using Vout = VDD − RD · ID,\n  VDD − RD · [k1 k2/(2 (k1 + k2))] (Vin − VT)^2 ≥ Vin − VT.\n  When this inequality no longer holds, M2 enters triode and the output approaches the lower rail; the gain collapses.\n\nNotes\n- Channel‑length modulation reduces |Av| via RD || rout; body effect in M2 raises its effective VT, reducing ID and gain relative to the ideal expressions.\n- Conceptually, the stack behaves like a single nMOS whose “k” is the harmonic mean: keq = k1 k2/(k1 + k2).",
        "format": "markdown",
        "sha256": "176be113ccdbcc880815d83a56987dc24f313c2d88994ca5bb5615d05897999f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series pair with M1 in triode and M2 in saturation, and derives the equivalent k = k1k2/(k1+k2). For identical devices this is k/2, equivalent to a device with about twice the channel length. The analysis is consistent under its stated ideal assumptions; “harmonic mean” is only a minor terminology imprecision.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 10924,
        "total_tokens": 11568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10304,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 10924,
        "total_tokens": 11568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10304,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Circuit identification\n- M1 and M2 are matched NMOS transistors that share a tail current source I1 → a source‑coupled (differential) pair.\n- M2’s drain is loaded by a resistor RD to VDD; Vout is taken at M2’s drain.  \n- M1’s drain is tied to VDD (single‑ended output).\n\nBasic (large‑signal) relations\n- The tail current is (ideally) fixed: ID1 + ID2 ≈ I1.\n- Output node: Vout = VDD − RD·ID2, with 0 ≤ ID2 ≤ I1.\n- When Vin = Vb (matched devices, both in saturation):  \n  ID1 = ID2 ≈ I1/2 and Vout0 = VDD − (I1/2)RD.\n- Increasing Vin above Vb steers current from M2 to M1 → ID2 ↓ → Vout ↑.  \n  Decreasing Vin below Vb steers current to M2 → ID2 ↑ → Vout ↓.\n- Output limits (with both devices staying in saturation):  \n  VDD − I1·RD ≤ Vout ≤ VDD.\n- A differential input roughly equal to 2·Vov (Vov is each device overdrive at the quiescent point) steers almost all current to one side:  \n  Vin − Vb ≈ +2Vov → ID2 ≈ 0; Vin − Vb ≈ −2Vov → ID2 ≈ I1.\n\nSmall‑signal gain (around Vin = Vb)\nAssume matched devices, both in saturation; current source with high output resistance; ro of M2 ≫ RD.\n\n- Source node small‑signal: vs = (vin + vb)/2 → with vb fixed, vs ≈ vin/2.\n- i2 = gm·(vg2 − vs) = −(gm/2)·vin (since vg2 = vb is AC ground).\n- vo = −RD·i2 = (gm·RD/2)·vin.\n\nTherefore\n- Voltage gain Av ≡ ∂vout/∂vin ≈ + (gm·RD)/2.  \n  Sign is non‑inverting: vout rises as vin − vb increases.\n- Effective transconductance from vin to output current: Gm,eff = gm/2.\n- Including finite output resistance of M2: Av ≈ (gm/2)·(RD || ro2).\n- Including finite tail‑source resistance r_ot: multiply by factor 2·gm·r_ot / (2·gm·r_ot + 1).  \n  So Av ≈ (gm/2)·(RD || ro2)·[2·gm·r_ot /(2·gm·r_ot + 1)].\n\nBias and headroom considerations\n- Quiescent source voltage vs0 ≈ Vb − VT − Vov (at Vin = Vb).\n- To keep M2 in saturation at the lowest output:\n  VDD − I1·RD − vs ≥ Vov (worst case when most of I1 flows in M2).\n- If I1 is implemented with a MOS current sink, also require vs ≥ VDS,sat(of I1).\n- M1 is usually safely in saturation because its drain is tied to VDD, but still needs VDD − vs ≥ Vov1.\n\nSummary\nThis is a single‑ended NMOS differential pair (current‑steering stage). Around the balanced point it behaves as a non‑inverting voltage amplifier with gain ≈ (gm·RD)/2, output resistance ≈ RD || ro2, and output swing from VDD − I1·RD up to VDD. The input controls how the fixed tail current I1 is split between the two branches; the current through M2 is converted to a voltage by RD to produce Vout.",
        "format": "markdown",
        "sha256": "35b34638de2118263759cc1d734303748f6ea321160f6449da87ec250086e8c5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, with M2’s gate at Vb and output at its drain, and gives the correct non-inverting small-signal gain. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 13801,
        "total_tokens": 14445,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 13801,
        "total_tokens": 14445,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What it is\n- M1 and M2 are nMOS that share the same source node X. A constant tail current I1 pulls node X.  \n- M2’s drain current flows through the resistor RD to VDD, so Vout = VDD − RD·ID2.  \n- M2’s gate is fixed at Vb (common‑gate device). M1’s gate is the input. Vin steers the tail current between M1 and M2.\n\nLarge‑signal (square‑law, channel‑length modulation ignored)\nLet βi = μnCox(W/L)i and VT the threshold. With both transistors on and in saturation\n- ID1 = ½β1 (Vin − VX − VT)^2\n- ID2 = ½β2 (Vb  − VX − VT)^2\n- KCL at X: ID1 + ID2 = I1\n- Output: Vout = VDD − RD·ID2\n\nIf devices are matched (β1 = β2 = β, same VT):\n- At Vin = Vb, ID1 = ID2 = I1/2 and VX = Vb − VT − √(I1/β)\n- When |Vin − Vb| ≥ √(2I1/β) one of the transistors turns off:\n  • Vin ≥ Vb + √(2I1/β) → M2 off, ID2 ≈ 0 → Vout ≈ VDD  \n  • Vin ≤ Vb − √(2I1/β) → M1 off, ID2 ≈ I1 → Vout ≈ VDD − I1 RD\nThus the transfer is non‑inverting and saturates between VDD − I1RD and VDD.\n\nSaturation conditions\n- M2: Vout ≥ Vb − VT (otherwise M2 enters triode). For full‑swing with ID2 = I1 at the low output end: VDD − I1RD ≥ Vb − VT ⇒ RD ≤ [VDD − (Vb − VT)]/I1.\n- M1: VDD − VX ≥ (Vin − VX − VT) ⇒ Vin ≤ VDD + VT (normally not a limiting condition).\n\nSmall‑signal (both devices on)\n- Tail current is fixed, so δID1 + δID2 = 0 ⇒\n  δVX = [gm1/(gm1 + gm2)] δVin\n  δID2 = −gm2 δVX = −[gm1 gm2/(gm1 + gm2)] δVin\n- With finite ro2, δVout = −δID2 (RD || ro2). Hence\n  Av = δVout/δVin ≈ [gm1 gm2/(gm1 + gm2)] · (RD || ro2)  (positive gain)\n  If ro2 ≫ RD: Av ≈ RD · gm1 gm2/(gm1 + gm2)\n  For matched devices biased at Vin ≈ Vb (gm1 = gm2 = gm): Av ≈ (gm/2) · (RD || ro2)\n\nKey points\n- The stage is a single‑ended source‑coupled pair (current‑steering transconductor).  \n- Vin controls how much of I1 flows in M2; that current through RD produces Vout.  \n- Midpoint operating point at Vin = Vb gives ID2 = I1/2 and VoutQ = VDD − (I1 RD)/2.  \n- Ensure Vout ≥ Vb − VT over the intended swing so M2 stays in saturation.",
        "format": "markdown",
        "sha256": "dfe2cd9c13c523921a52606598b2c2aa15cd3beb00860b8fb87e04bf5913a966"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a source-coupled pair, with M2’s gate fixed at Vb and output at its drain. Its small-signal gain is correctly non-inverting; this meets the full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 13427,
        "total_tokens": 14071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 13427,
        "total_tokens": 14071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What it is\n- NMOS source‑coupled pair with a tail current I1. The two transistors M1 (gate = Vin) and M2 (gate = Vb) share the source node. Only the M2 branch has a load (RD to VDD), so the output is Vout = VDD − RD·ID2. The pair steers the tail current between M1 and M2 according to the gate‑voltage difference Vid = Vin − Vb.\n\nAssumptions for analysis\n- Long‑channel NMOS, both devices matched with parameter β = μnCox(W/L), VDS sat ≈ VOV, channel‑length modulation and body effect neglected (ro → ∞).\n\nDC/large‑signal relation\n- With both transistors in saturation the drain currents are\n  ID1 = (β/2)(VOV1)^2,  ID2 = (β/2)(VOV2)^2,\n  where VOVi = VGi − VS − Vth and VOV1 − VOV2 = Vin − Vb ≡ Vid.\n- From ID1 + ID2 = I1 and the relations above,\n  VOV2 = [−Vid + √(4 I1/β − Vid^2)]/2   (choose the positive root),\n  ID2 = (β/2)·VOV2^2\n       = I1/2 − (β/4)·Vid·√(4 I1/β − Vid^2),   for |Vid| ≤ 2√(I1/β).\n- When Vid ≥ 2√(I1/β): M2 is off, ID2 ≈ 0 ⇒ Vout ≈ VDD.\n  When Vid ≤ −2√(I1/β): M2 takes the whole tail, ID2 ≈ I1 ⇒ Vout ≈ VDD − I1RD.\n- Balanced point (Vin = Vb): ID1 = ID2 = I1/2,\n  VOV0 = √(I1/β),  VS = Vb − Vth − VOV0,\n  Vout0 = VDD − (I1/2)RD.\n\nSmall‑signal (about Vin = Vb)\n- gm of each device at ID = I1/2: gm = βVOV0 = √(βI1).\n- Incremental current in M2: i2 ≈ −(gm/2)·vid.\n- vout ≈ (gm/2)·RD·vid (positive gain). With finite ro2, replace RD by RD || ro2.\n\nInput range and saturation conditions\n- Both devices on: |Vin − Vb| < 2√(I1/β).\n- Keep M2 in saturation: Vout − VS ≥ VOV2.\n- Keep M1 in saturation: VDD − VS ≥ VOV1.\n  Using VS ≈ Vb − Vth − VOV2, these give constraints on VDD, RD and the bias Vb.\n\nInterpretation\n- The cell is a single‑ended differential pair (current‑steering transconductor). Vout moves toward VDD when Vin is increased above Vb (M2 current decreases), and toward VDD − I1RD when Vin is decreased below Vb (M2 current increases). Near balance the voltage gain is approximately (gmRD)/2.",
        "format": "markdown",
        "sha256": "9d53e2a1705756f5814c8e0ebb2d495cf239afe9425086e189cccf4d53ac5ded"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, with M2’s gate at Vb and output at its drain. The current steering and non-inverting small-signal gain are also consistent with the circuit.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9815,
        "total_tokens": 10459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9088,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9815,
        "total_tokens": 10459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9088,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Set Vin and Vb to ac ground and look into Vout (the source of M1).\n\nBecause the gate of M1 is tied to ground through Rs, any small ac voltage applied at Vout drives a current through Cgs into the gate. The gate voltage therefore follows Vout with a 90° phase lag:\nVg = [jωRsCgs/(1 + jωRsCgs)] · Vout\n\nThe current that leaves the output node through M1 is\ni = gm(Vg − Vout) + jωCgs(Vout − Vg)\n\n⇒ Yout = i/Vout ≈ (gm + jωCgs)/(1 + jωRsCgs)\n\nThus the impedance seen at the output is\nZout = 1/Yout ≈ (1 + jωRsCgs)/(gm + jωCgs)\n≈ 1/gm + jω [RsCgs/gm − Cgs/gm²]\n\nFor Rs ≫ 1/gm (usual case), the reactive term is positive and the impedance is approximately\nZout ≈ 1/gm + jωLeq, with Leq ≈ Rs Cgs / gm\n\nHence, the source of M1 (and therefore the output node) behaves like a resistor 1/gm in series with an inductor Leq. Physically, the transconductance of M1 “gyrates” its gate capacitance through the gate resistor, transforming Cgs into an apparent inductance at the output. M2 mainly provides a dc current and adds a shunt resistance; the inductive behavior comes from M1–Rs–Cgs.",
        "format": "markdown",
        "sha256": "bea6aec9f448107557a286ac75001fb37815ec549a505ab4f75fcf52e2571cec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the correct output-impedance expression and identifies positive inductive behavior when Rs > 1/gm, with the appropriate low-frequency inductance approximation and Rs–Cgs mechanism. The phase/current-sign wording is inconsistent, but does not change the correct core result.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 933,
        "output_tokens": 11291,
        "total_tokens": 12224,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 933,
        "output_tokens": 11291,
        "total_tokens": 12224,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Look into the output node with the signal sources set to ac ground (Vin=0, Vb=0).  \nM1 is a source follower whose drain is at ac ground (VDD). The gate of M1 is tied to ground through Rs and is coupled to the output through the intrinsic gate‑source capacitance Cgs.\n\nA small variation at Vout drives current through Cgs and makes the gate follow the source only through Rs, i.e. with a delay τ = RsCgs. This means that the small‑signal vgs is not simply −vout but contains a term proportional to dvout/dt. The current drawn by M1 is i ≈ gm vgs, therefore a component of the current is proportional to dvout/dt, so the voltage leads the current by 90°, as in an inductor.\n\nA small‑signal calculation gives the output impedance\nZout(s) = (1 − s Rs Cgs) / (s Cgs − gm) ≈ −1/gm + s (Rs Cgs / gm)  for ω ≪ min{1/(RsCgs), gm/Cgs}.\n\nThus the element seen at the output is an inductor L ≈ (Rs Cgs) / gm in series with a small (negative) resistance −1/gm. With a high‑resistance current sink M2 (large ro2) in parallel, the reactive part dominates and the output impedance appears inductive. This is the “active inductor” (gyrator‑C) behavior.",
        "format": "markdown",
        "sha256": "2167fe99630e967bd912d48714aeca41fc9859c93ad10528c49af8ee4545f39f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the source follower and the relevant Rs–Cgs mechanism, but its impedance expression has incorrect signs, predicting negative resistance and the wrong high-frequency limit. It also omits the key condition Rs > 1/gm for the impedance to rise and be inductive.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 933,
        "output_tokens": 9778,
        "total_tokens": 10711,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9408,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 933,
        "output_tokens": 9778,
        "total_tokens": 10711,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9408,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Set the independent sources to ac ground to find Zout. Then the source of M1 is at ac ground (VDD), the gate of M1 is returned to ground through RS, and the output node is its drain. The only path that couples the output node to the gate is the Miller capacitor Cgd (and Cgs is from the gate to ground).\n\nA small change at Vout is capacitively coupled to the gate through Cgd. Because the gate is tied to ground through RS, this coupled voltage appears at the gate with the delay τ = RS(Cgs + Cgd):\nVg(s) = [s RS Cgd / (1 + s RS(Cgs + Cgd))] · Vout(s)\n\nThe drain current of M1 is gm1·Vgs = gm1·Vg(s). Hence the current drawn by M1 from the output is not in phase with Vout; it is delayed by the RS–(Cgs+Cgd) time constant. Around the band 1/RS(Cgs+Cgd) < ω < gm1/Cgd this delay makes the current drawn from the node lag the node voltage, so the output susceptance becomes negative. In other words, the output looks like R in series with an L (inductive).\n\nIntuitively: a rise of Vout couples to the gate through Cgd, but RS prevents the gate from following immediately; therefore the drain current of M1 cannot change instantaneously and lags the voltage—exactly the behavior of an inductor. The M1–RS network acts as a gyrator that converts the gate capacitances into an equivalent inductance seen at the drain, with a rough value\nLeq ≈ RS · Cg,tot / gm1  (Cg,tot ≈ Cgs + Cgd; exact value depends on the capacitance split).",
        "format": "markdown",
        "sha256": "ec28c45b6104194fba06daa92c874e509f599788ac7728f6eb540cb08790ad3f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the topology: M1 is a source follower with output at its source and drain at AC ground, not a common-source stage with output at its drain. Its Cgd-based explanation misses the actual RS–CGS mechanism and the transition from Zout ≈ 1/gm1 to RS.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 933,
        "output_tokens": 10618,
        "total_tokens": 11551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10176,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 933,
        "output_tokens": 10618,
        "total_tokens": 11551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10176,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What it is\n- Two nMOS transistors (M1, M2) with their sources at ground and drains tied to Vout. The load is RD1 to VDD.  \n- The gates of M1 and M2 are tied together at node X. The input is a current injected into node X.  \n- Since MOS gates draw (ideally) no dc current, node X is a capacitive node whose capacitance is Cx ≈ Cgs1 + Cgs2 + Cpar.\n\nLarge‑signal (assuming both MOSFETs in saturation and ignoring channel‑length modulation)\n- iD1 = (β1/2)(Vx − VTN1)^2, iD2 = (β2/2)(Vx − VTN2)^2, where βi = μnCox(W/L)i.\n- Total drain current to ground: ID = iD1 + iD2.\n- Output voltage: Vout = VDD − RD1·ID.\n- Saturation condition for both devices: Vout ≥ Vx − VTN,i.\n\nSmall‑signal around a bias point (ro → ∞)\n- The two transistors behave like a single device with gmT = gm1 + gm2.\n- Output relation: vout = −RD1·gmT·vx.\n- Input node equation (because X is capacitive): iin = Cx·dvx/dt → vx(s) = iin(s)/(sCx).\n\nTransfer functions\n- Transimpedance (current in → voltage out):\n  Zt(s) = vout(s)/iin(s) ≈ −RD1·gmT/(s·Cx).\n  The stage behaves as an inverting integrator.\n- Input impedance: Zin(s) ≈ 1/(s·Cx) (open at dc).\n- Output resistance: Rout ≈ RD1 || ro1 || ro2; if roi ≫ RD1, Rout ≈ RD1.\n\nNotes\n- If M1 and M2 are identical, gmT = 2gm and Cx ≈ 2Cgs, so the integrator constant is K = RD1·gm/Cgs.\n- If channel‑length modulation is included, an additional pole appears at the output: Rout becomes RD1 || ro1 || ro2, slightly reducing gain magnitude.",
        "format": "markdown",
        "sha256": "2dba8a2b44fb27ed5264156ebf92af1c8f7c7c28a952c3a72a29aa8f3d6435c4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly recognizes the input current at X and M1’s common-source action, but incorrectly puts M2 in parallel with M1, missing that M2’s gate is tied to Vout and the resulting positive-feedback loop and instability.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 10712,
        "total_tokens": 11356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10176,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 10712,
        "total_tokens": 11356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10176,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Interpretation\n- M1 is an nMOS used as a common–source stage. Its drain is the output node Vout, loaded by RD1 (and by ro1 of M1).\n- M2 is used as a MOS capacitor between node X (the gates) and Vout: its source and drain are shorted to Vout, its gate is at X. Call this capacitance Cf (it also includes M1’s Cgd).\n- The input is a current source Iin injected into the gate node X. Let Cx be the total capacitance from X to ground (≈ Cgs1 plus wiring).\n\nDC (bias)\nAt DC the gate current is ≈ 0, so a DC current source cannot be balanced at X; in practice a bias network fixes Vx so that M1 conducts Id1 and Vout = VDD − RD1·Id1. Small‑signal analysis below assumes M1 is biased in saturation (gm1, ro1 well defined).\n\nSmall‑signal transimpedance Zt(s) = Vout(s)/Iin(s)\nLet RL = RD1 || ro1, Cf = Cgd1 + CM2, Cx ≈ Cgs1 + Cpar. KCL at X and Vout gives\n\nZt(s) = Vout/Iin = −(gm1 − s Cf) / [ s ( Cf Cx s + Cf gm1 + (Cx + Cf)/RL ) ]\n\nKey features (poles/zero)\n- One pole at the origin (integrator): p0 = 0. A DC input current produces a ramp at the output.\n- A finite left‑half‑plane pole:\n  p1 = − [ Cf gm1 + (Cx + Cf)/RL ] / (Cf Cx).\n- A right‑half‑plane zero due to the feed‑forward path through the gate–drain (Miller) capacitor:\n  zRHP = + gm1/Cf.\n\nPhysical meaning\n- The capacitor from output to gate creates Miller feedback. A change at Vout is capacitively coupled back to X, opposing the change in M1 current (negative feedback).\n- The RHP zero is the familiar one of a common‑source stage with Cgd; it is undesirable for phase margin. Keep its frequency well above the closed‑loop bandwidth:\n  gm1/Cf >> |p1|  (place the zero decades beyond the dominant pole).\n- The effective input capacitance seen by the current source is\n  Cin,eff ≈ Cx + Cf(1 − Av) ≈ Cx + Cf(1 + gm1 RL)  (since Av ≈ −gm1 RL),\n  so the input current mostly charges this large effective capacitance (explains the pole at the origin).\n\nUseful limits\n- If Cf gm1 >> (Cx + Cf)/RL (strong Miller feedback), then\n  p1 ≈ −gm1/Cx and zRHP ≈ gm1/Cf; stability improves if Cf << Cx so that zRHP is far beyond |p1|.\n- If Cf → 0 (no Miller cap), Zt(s) → −gm1 RL / (s Cx), a simple integrator with bandwidth ≈ 1/(RL Cx).\n\nWhat the circuit is\nA one‑transistor transimpedance/integrator: an input current at X is converted to an output voltage at Vout through the common‑source gain of M1 and the feedback capacitor M2. The frequency response is that of an integrator with one additional pole and a right‑half‑plane zero set by Cf and gm1.",
        "format": "markdown",
        "sha256": "134e2856031fc5339ff95b64f7555d7d7e93d4a40af74f52d7e0ef4bf9e2c228"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Correctly identifies M1 as a common-source stage and the input current at X, but misreads M2 as a capacitor and misses the positive-feedback loop. The resulting integrator and stability analysis do not describe the circuit.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 10724,
        "total_tokens": 11368,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 10724,
        "total_tokens": 11368,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Below is a small‑signal view of the circuit (assume both MOSFETs are nMOS biased in saturation and that the input source provides only ac current; the dc bias of node X is provided elsewhere).\n\n1) Vx → Vout gain (with ro neglected for clarity)\n- The two transistors work in parallel. The small‑signal drain current drawn from the output node is (gm1 + gm2)·vx.\n- With RD1 to VDD, the mid‑band voltage gain from node X to the output is\n  Av ≡ vout/vx ≈ −(gm1 + gm2)RD1 ≡ −gmT RD1,\n  where gmT = gm1 + gm2.\n\n2) Current seen at node X (the “input” node)\n- Gate currents are (ideally) zero, so only the capacitors connected to node X can carry the input current.\n- Cin at node X is the sum of Cgs’s plus the Miller‑multiplied Cgd’s:\n  Cin ≈ Cgs1 + Cgs2 + (1 − Av)(Cgd1 + Cgd2)\n      ≈ Cgs1 + Cgs2 + (1 + gmT RD1)(Cgd1 + Cgd2).\n- Hence the input impedance is\n  Zin(s) ≈ 1/[s Cin].\n  For large |Av| the Miller term dominates, so node X behaves like a large capacitor (near ac ground).\n\n3) Transimpedance (Vout/Iin)\n- KCL at node X gives Iin = s Cin vx ⇒ vx = Iin/(s Cin).\n- Therefore\n  Zt(s) ≡ vout/Iin = Av · vx/Iin ≈ −gmT RD1 /(s Cin).\n  The circuit is thus a current‑to‑voltage integrator. Its effective time constant is\n  τ ≈ Cin/(gmT RD1).\n\n4) Higher‑order effects (useful approximations)\n- Because the path through Cgd is a feed‑forward path, a left‑half‑plane zero appears at\n  ωz ≈ gmT/(Cgd1 + Cgd2).\n- The output node has a non‑dominant pole set by the resistance seen at Vout (Ro ≈ RD1 ∥ ro1 ∥ ro2) and the capacitance at that node (CL ≈ Cdb1 + Cdb2 + wiring):\n  ωp ≈ 1/[Ro (CL + Cgd1 + Cgd2)].\n- A convenient approximate form is\n  Zt(s) ≈ (−gmT Ro) · (1 − s/ωz) / [s Cin · (1 + s/ωp)].\n\n5) Role of M2\n- M2 simply adds transconductance and, more importantly, extra Cgd that is Miller‑multiplied, greatly increasing Cin. By sizing M2 you can set both gmT and Cin, hence the integrator constant K = (gmT RD1)/Cin. It also moves the zero (ωz ∝ gmT/CgdT) and the output pole.\n\nSummary\n- The circuit is a transimpedance integrator that uses the MOS gate–drain capacitances and the Miller effect to realize a large effective integrating capacitor at node X. The low‑frequency transimpedance is approximately −(gm1 + gm2)RD1 divided by s times the effective input capacitance Cin.",
        "format": "markdown",
        "sha256": "e2a675b9bf6d3e7e0a3bd9efb8245b441374fb99db608f002f4ec1b4a8d0c696"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The analysis invents a parallel common-source M2, rather than recognizing that M2’s gate is tied to Vout and its drain is at X. It therefore misses the positive-feedback loop and incorrectly concludes that X is purely capacitive and the circuit is an integrator, instead of identifying the negative input resistance and instability/latching.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 12258,
        "total_tokens": 12902,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11520,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 12258,
        "total_tokens": 12902,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11520,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What it is\n- Two cascaded common‑source stages with resistive loads. M1 (biased by Vb) together with RD1 converts the signal at node a (the source of M1) to a voltage at node X. M2 with RD2 converts vX to the output voltage vout.\n- RF returns a portion of vout as a current to the input node a. This is shunt–shunt (current‑mixing, voltage‑sensing) negative feedback, so the circuit is a transimpedance amplifier (TIA).\n\nSmall‑signal model (VDD is ac ground)\n- Gate of M1 is ac ground. Let gm1, ro1 and gm2, ro2 be the small‑signal parameters.\n- Define G1=1/RD1, G2=1/RD2, Gy=G2+1/ro2.\n\n1) Relation between vX and vA (node a):\n  (G1+1/ro1) vX − (gm1+1/ro1) vA = 0  ⇒  vX = A1 vA,  A1 = (gm1+1/ro1)/(G1+1/ro1) ≈ gm1 RD1.\n\n2) Output stage (with RF open):\n  Gy vout + gm2 vX = 0  ⇒  vout = −A2 vX,  A2 = gm2/Gy ≈ gm2 (RD2 || ro2).\n\n3) Input port current (with RF open):\n  ia = (vA−vX)/ro1 + gm1 vA.\n\nEliminating vX with vX=A1 vA gives the open‑loop transimpedance from input current ia to output voltage:\n  Zol = vout/ia = − gm2 (RD2 || ro2) RD1.\nNote that ro1 and gm1 cancel; Zol depends only on RD1, RD2 (and ro2) and gm2.\n\nClosed‑loop with RF\nThe feedback current into node a is if = vout/RF. The amplifier input current is\n  ia = iin + vout/RF,\nand vout = Zol ia. Solving,\n  Zt ≡ vout/iin = Zol / (1 − Zol/RF).\n\nDefine the loop gain T = −Zol/RF = gm2 RD1 (RD2 || ro2)/RF (T > 0).\n- If T ≫ 1: Zt ≈ −RF. The input node becomes a virtual ground and the amplifier behaves as an ideal TIA set by RF.\n- If T ≪ 1: Zt → Zol (essentially open loop).\n\nOther useful results/remarks\n- Open‑loop input resistance (RF open): Rin,ol ≈ 1/gm1 (for ro1 ≫ RD1).\n- With feedback (shunt mixing): Rin,cl ≈ Rin,ol/(1+T) → very small for large T.\n- The dominant poles are at nodes X and Vout; stability is governed by T(s). A small capacitor across RF is often used to shape the loop for phase margin.\n\nIn short: the circuit is a resistive‑feedback MOS transimpedance amplifier. Its closed‑loop transimpedance is Zt = Zol/(1 − Zol/RF), with Zol ≈ −gm2 RD1 (RD2 || ro2); for large loop gain it realizes vout ≈ −iin RF and keeps the input node near a virtual ground.",
        "format": "markdown",
        "sha256": "f4f9b814d5423c4c7f22ee66f0eb711db878c971d8c51b0d7f5f0902a75a6c59"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Despite the stray opening label of “two common-source stages,” the answer correctly gives M1’s gate-biased, source-input connection, M2 driven by X, and RF feedback from Vout to the input node. Its feedback sign and transimpedance analysis are also correct, satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 17101,
        "total_tokens": 17745,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16320,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 17101,
        "total_tokens": 17745,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16320,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What it is\n- Two–stage MOS transimpedance amplifier (shunt–shunt feedback).\n- M1 is a common–gate input device (gate at Vb). It presents a low input resistance (~1/gm1) and converts the input‑node voltage to a drain current.\n- RD1 converts the M1 drain current to a voltage vx that drives the gate of M2.\n- M2 is a common‑source stage with load RD2, producing vout. RF returns a current (vout − vin)/RF to the input node, closing the loop.\n\nSmall‑signal analysis (ro neglected for clarity)\n- Stage gains:\n  Av1 = dvx/dvin ≈ −gm1 RD1\n  Av2 = dvout/dvx ≈ −gm2 RD2\n  Open‑loop gain from vin to vout: K = Av1 Av2 = gm1 gm2 RD1 RD2 (positive).\n\n- KCL at the input node (current into the node is positive):\n  Iin = (vin − vout)/RF + gm1 vin\n\n  with vout = K vin ⇒\n  vin = Iin / [ gm1 + (1 − K)/RF ]\n  vout = K vin\n\n- Transimpedance (closed‑loop):\n  Zt = vout/Iin = − RF × K / [ K − (1 + gm1 RF) ]\n\n- Input impedance:\n  Zin = vin/Iin = − RF / [ K − (1 + gm1 RF) ]\n\nImportant limits\n- If K ≫ (1 + gm1 RF), the loop gain is large:\n  vout ≈ − Iin RF  (transimpedance ≈ −RF)\n  Zin ≈ RF/K ≪ 1/gm1 (the input node is a virtual ground)\n  iRF = (vout − vin)/RF ≈ −Iin\n\nIncluding output resistances\n- Replace RD1 → RD1 || ro1 and RD2 → RD2 || ro2; the above expressions remain valid with K = gm1 (RD1 || ro1) gm2 (RD2 || ro2).\n\nSummary\nThe circuit is a TIA that uses a common‑gate front end followed by a common‑source gain stage and shunt feedback through RF. With sufficient open‑loop gain K, the transimpedance is set almost entirely by RF (≈ −RF) and the input node is held near ground (very low Rin).",
        "format": "markdown",
        "sha256": "47e7a6f331a89d3f8832caca351ca9b11418bc3bb2fad35ff6fe46498ccf37a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the devices and feedback connection correctly, but gives the common-gate stage the wrong gain polarity. The resulting positive open-loop gain implies positive feedback with its stated KCL, making the analysis inconsistent with the circuit’s negative feedback and the closed-loop formulas incorrect.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 14108,
        "total_tokens": 14752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 14108,
        "total_tokens": 14752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What the circuit is\n- It is a shunt–shunt feedback transimpedance amplifier (TIA).\n- M1 is a common–gate NMOS biased by Vb; it gives a low input resistance and converts the input‑node voltage to a voltage at node X.\n- M2 is a common‑source NMOS; node X drives its gate. RD1 and RD2 are the loads. RF returns a current proportional to Vout to the input node to realize negative feedback.\n\nSmall‑signal (low‑frequency) model\nLet vin be the input‑node voltage (at the source of M1), vx the voltage at node X, and vout the output voltage. Using ro1, ro2 of the transistors and assuming the gate of M1 is at ac ground:\n\n- Stage gains\n  - vx/vin ≈ gm1(RD1 || ro1) ≡ A1  (common‑gate, noninverting)\n  - vout/vx ≈ −gm2(RD2 || ro2) ≡ −A2  (common‑source, inverting)\n  - Hence vout/vin = −A, with A = A1A2 = gm1(RD1||ro1)·gm2(RD2||ro2).\n\n- Input resistance of M1 without feedback: rin ≈ 1/gm1 (ignoring body effect).\n\nWith RF connected, KCL at the input node gives\nIin = vin/rin + (vin − vout)/RF = vin[1/rin + (1 + A)/RF].\n\nTherefore:\n- Closed‑loop transimpedance\n  Zt ≡ vout/Iin = −A / [1/rin + (1 + A)/RF]\n                 ≈ − A RF / (1 + A + gm1 RF)      (using rin ≈ 1/gm1).\n\n- Closed‑loop input resistance\n  Zin ≡ vin/Iin = 1 / [1/rin + (1 + A)/RF]\n                 ≈ RF / (1 + A + gm1 RF).\n\nUseful limits\n- If A ≫ 1 and A ≫ gm1 RF, then\n  - Zt ≈ −RF  (ideal TIA behavior),\n  - Zin ≈ RF/(1 + A) ≪ RF (virtual ground at the input).\n\nOperation intuition\nA positive input current raises vin; through M1 the node X rises (gain A1), which increases M2 current and pulls vout negative. The negative vout drives a current through RF from the input node to the output, opposing the applied Iin—i.e., negative feedback.",
        "format": "markdown",
        "sha256": "7f94bcb8abe90f28e8d21de70241d81e480738924b494718f559de042852c886"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from Vout to the input node. The transimpedance and input-resistance analysis is also consistent with the circuit.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 10863,
        "total_tokens": 11507,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10240,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 10863,
        "total_tokens": 11507,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10240,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What the circuit is\n\n- NMOS M1 is biased with Vb and its source is the input/summing node.  \n- NMOS M2 has the same source and drain nodes as M1; its gate is at a fixed potential (AC ground). It provides local feedback so that the source node voltage is almost constant, i.e., the input node behaves like a virtual ground.  \n- I1 is a current source connected to VDD and the output node. The output voltage is taken at the drain of M1/M2.\n\nIntuition of operation\n\n- The input current Iin is forced to flow through the M1/M2 path to the output node.  \n- The current source I1 pulls current from VDD into the output node. Therefore the output node current equals I1 − Iin, so the output voltage moves up when Iin < I1 and down when Iin > I1.  \n- M2 “regulates” the source node of M1 so that it stays nearly constant (low input impedance); M1’s drain current then closely follows Iin.\n\nSmall‑signal results (assume both transistors in saturation, body effect neglected)\n\n- Input resistance seen at the summing node\n  Rin ≈ 1/(gm1 + gm2)  \n  (with ro1, ro2 ≫ 1/gm, the two source followers are effectively in parallel, giving a very low Rin.)\n\n- Output transimpedance (to first order, with the current source I1 having finite output resistance roL)\n  Zt ≡ vout/iin ≈ − roL\n  If I1 were ideal (roL → ∞), the small‑signal transimpedance would become very large; in practice, a finite roL or an explicit load limits the gain.\n\nDC/large‑signal behavior and compliance\n\n- The input (summing) node voltage is approximately\n  Vx ≈ Vb − VGS1\n  and is almost constant versus Iin because of the local feedback through M2.\n- Output limits (to keep M1 and M2 in saturation)\n  vout,min ≈ Vx + Vov1  \n  vout,max ≈ VDD − max(Vov2, Vcs,I1)\n  where Vov is the overdrive of the indicated device and Vcs,I1 is the minimum compliance of the current source I1.\n- Consequently, for Iin ≪ I1 the output goes to its high limit; for Iin ≫ I1 it goes to its low limit; at Iin ≈ I1 the output is in the mid‑range.\n\nSummary\n\nThe circuit is a regulated‑cascode transimpedance stage. M2 provides local feedback that makes the input node a low‑impedance “virtual ground” (Rin ≈ 1/(gm1+gm2)), forcing nearly all of Iin to appear at the output node. The output voltage is therefore the current difference (I1 − Iin) converted to voltage mainly by the finite output resistance of the load current source (vout ≈ − roL·iin, small‑signal), with output swing limited by the overdrives of M1/M2 and the compliance of I1.",
        "format": "markdown",
        "sha256": "7b20f369b2e0200db99cdfde07473721d1a624ef3a45b755a5af70e486209a81"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads M2 as an NMOS with a fixed gate and the same source/drain nodes as M1, missing the actual PMOS feedback path from Vout to the input node. Its input-resistance and transimpedance results therefore describe the wrong topology.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 17463,
        "total_tokens": 18107,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 17463,
        "total_tokens": 18107,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assumptions and names\n- M1 is an NMOS; M2 is a PMOS.  \n- All devices operate in saturation.  \n- ac ground: Vb and VDD.  \n- Node x = source of M1 and gate of M2 (input node).  \n- Node y = Vout (common drain node of M1 and M2).  \n- Small‑signal parameters: gm1, ro1 for M1 and gm2, ro2 for M2.\n\nQualitative operation\n- M1 is a common‑gate device that receives the input current at its source.  \n- M2 senses the input‑node voltage (its gate is at node x) and changes the current it delivers to node y. This forms a local negative‑feedback loop that tries to keep vx almost constant (“regulated‑cascode” input stage).  \n- The current source I1 is only a dc load; in small‑signal it is open.\n\nDC (large‑signal) relations and headroom\n- KCL at Vout: I1 + ID2 = ID1.  \n- To keep both MOS in saturation, the output swing must satisfy\n  Vx + Vov1 ≤ Vout ≤ VDD − Vov2,\n  and M1 must be biased with Vb so that Vgs1 > Vth,n.\n\nSmall‑signal analysis\nWrite KCL at the two nodes using the hybrid‑π model (Vb, VDD are ac ground).\n\nAt node y (Vout):\n(gds1 + gds2)·vy − (gds1 + gm1 + gm2)·vx = 0\n⇒ vy = [(gds1 + gm1 + gm2)/(gds1 + gds2)]·vx.\n\nAt node x (input):\niin = (gds1 + gm1)·vx − gds1·vy.\n\nEliminating vy gives\n\niin = [(gds2(gds1 + gm1) − gds1 gm2)/(gds1 + gds2)]·vx.\n\nHence\n- Input resistance Rin ≡ vx/iin\n  = (gds1 + gds2) / [gds2(gds1 + gm1) − gds1 gm2]\n  = (ro1 + ro2) / [1 + gm1 ro1 − gm2 ro2].\n\n- Transimpedance Zt ≡ vout/iin\n  = (gds1 + gm1 + gm2) / [gds2(gds1 + gm1) − gds1 gm2]\n  = [ro2 + (gm1 + gm2) ro1 ro2] / [1 + gm1 ro1 − gm2 ro2].\n\nObservations/limits\n- If M2 is weak (gm2 ro2 ≪ 1), the circuit behaves like a simple common‑gate stage:\n  Rin ≈ 1/gm1 and Zt ≈ ro2.\n- With strong regulation (gm2 ro2 ≫ 1), vx is nearly fixed and the magnitude of Rin becomes very small:\n  Rin ≈ −(ro1 + ro2)/(gm2 ro2) ≈ −1/gm2 (if ro2 ≫ ro1).  \n  The negative sign only indicates that the local loop can provide power; the magnitude is what sets how well the input node is “held” (useful with current‑source inputs such as a photodiode).\n- Output swing is limited by the saturation requirements noted above.\n\nIn short: the circuit is a regulated‑cascode current‑to‑voltage stage. M2 provides gain‑boosting (feedback) that greatly lowers the input resistance and increases the transimpedance magnitude compared with a plain common‑gate input.",
        "format": "markdown",
        "sha256": "30f901b9e7d866fc4a425728ef1902470ecbf41db6255fcd6f6fd450419a20b4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer reverses M2’s connections: in the figure its gate is driven by Vout and its drain feeds the input node. This misses the actual feedback path, so the small-signal analysis and regulated-cascode interpretation describe the wrong topology, despite correctly identifying M1 as NMOS and M2 as PMOS.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 22201,
        "total_tokens": 22845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21376,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 22201,
        "total_tokens": 22845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21376,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "What the circuit is\n\n- M1 and M2 are nMOS transistors that share the same source node.\n- M2 is diode–connected (gate and drain tied together) to node Vout.\n- A current source I1 pulls a constant current from VDD into Vout.\n- A current Iin is injected at the common source node (its two symbols only mean it can be of either sign).\n- Vb is a dc bias for the gate of M1.\n\nDC (large‑signal) relations\n\n- KCL at Vout: I1 = ID1 + ID2.\n- KCL at the common source node: Iin = ID1 + ID2.\n\nHence a necessary condition for a static operating point is\nIin = I1.\nIf Iin ≠ I1 the node voltages run to the rails (one of the MOSFETs turns off) and the circuit has no valid dc bias; it behaves like a current comparator.\n\nIf Iin = I1 and channel‑length modulation is neglected, ID1 = I1 fixes VGS1, so\nVs ≈ Vb − VGS1(I1).\nM2 then carries almost no dc current (Vout ≲ Vs + VT2).\n\nSmall‑signal behavior (with a finite output resistance rI of I1, or any load connected at Vout)\n\nLet rI be the small‑signal resistance seen from Vout to VDD of the current source I1. Using small‑signal KCL:\n\n- At Vout: vout/rI + id1 + id2 = 0.\n- At the source node: iin = is1 + is2 = −(id1 + id2).\n\nEliminating the device currents gives the very simple result\nvout = rI · iin.\n\nTherefore:\n- The incremental transimpedance from the input current to the output voltage is exactly rI, independent of gm or the device sizes.\n- If I1 is ideal (rI → ∞) the small‑signal gain becomes unbounded and the circuit has no well‑defined operating point; a finite load at Vout is required for meaningful operation.\n\nIntuition\n\nM1 (biased by Vb) and the diode‑connected M2 only steer current so that whatever incremental current enters at the source node is forced to flow through the output resistance of the current source at Vout. The output voltage is simply that resistance times the input current.",
        "format": "markdown",
        "sha256": "386c45f2cbd958cb27bdf124949feb6e6a6e879582b191bdad5c6520d41ddf36"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads M2 as an NMOS diode-connected at Vout and misses the PMOS feedback path to the input node. Its claimed transimpedance of rI and DC operating-point analysis do not describe the circuit.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 27052,
        "total_tokens": 27696,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26496,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 27052,
        "total_tokens": 27696,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26496,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—making the three capacitors larger does not stop a 3‑stage ring oscillator from oscillating (for any finite value of C). The larger C only increases the stage delay τ = Rout·CL, so the oscillation frequency drops roughly as\n\nf0 ≈ (√3)/(2π Rout CL).\n\nThe start‑up condition depends on the dc gain of each inverter, not on CL: the loop will start if the low‑frequency gain per stage is ≥ 2. Thus, with adequate inverter gain, the circuit keeps oscillating but more and more slowly as CL increases. Only in the unphysical limit CL → ∞ would the frequency go to zero (i.e., no oscillation).",
        "format": "markdown",
        "sha256": "55aedde5a4205b0299007293aae9aa6e5efb5a044411b9dc2d5b77b34e6020fb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal capacitors on all three nodes lower the oscillation frequency without stopping oscillation for finite capacitance, and supports this with a valid delay/frequency argument and the gain condition.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1216,
        "output_tokens": 8273,
        "total_tokens": 9489,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8064,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1216,
        "output_tokens": 8273,
        "total_tokens": 9489,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8064,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. A 3‑stage ring oscillator will still oscillate for any finite load capacitance; the frequency just becomes smaller.\n\nModel each inverter as an inverting gain K with a dominant pole τ = Rout·CL. The loop transfer is\nA(jω) = [−K/(1 + jωτ)]³.\n\nOscillation requires\n- Phase: 3·arctan(ωτ) = 180° → ω = √3/τ.\n- Magnitude: |A| = K³/[1 + (ωτ)²]^{3/2} = (K/2)³ ≥ 1 → K ≥ 2.\n\nSo, provided each inverter’s small‑signal gain K > 2 (true for typical CMOS), oscillation occurs regardless of how large CL is; the frequency scales as f ≈ (√3)/(2π Rout CL). As CL → ∞, f → 0 (the period → ∞), so it appears to “stop” only in the unphysical limit of infinite capacitance or if the inverters lack sufficient gain/drive.",
        "format": "markdown",
        "sha256": "0727c93fc43f2d214046b46db03a32d6bc0c69ca6b33e3fabca1f82e797e171c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal, finite capacitive loads lower the oscillation frequency without changing the gain condition. The small-signal phase and magnitude analysis supports this conclusion.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1216,
        "output_tokens": 5799,
        "total_tokens": 7015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1216,
        "output_tokens": 5799,
        "total_tokens": 7015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. For any finite value of the load capacitors the ring oscillator will still oscillate; it just gets slower.\n\nReason:\n- Model each inverter as −A0 with a single pole at ωp = 1/(R_eff C_L).  \n- For three identical stages the phase condition is met when each stage has 120° phase (ω = √3·ωp).  \n- The magnitude condition then requires A0 ≥ 2, which is independent of C_L.\n\nThus increasing C_L only lowers the oscillation frequency approximately as f ∝ 1/C_L (e.g., f ≈ √3/(2π R_eff C_L)), but does not stop oscillation. In the limit C_L → ∞ the frequency tends to zero (i.e., period → ∞), so only an infinite capacitance would “stop” it.",
        "format": "markdown",
        "sha256": "73852274153f83fababcc9ff49c982499483b522fba4cf6d838cea5646757268"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency, and the small-signal phase and gain conditions show that scaling all three capacitors lowers frequency without changing the oscillation condition.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1216,
        "output_tokens": 7406,
        "total_tokens": 8622,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1216,
        "output_tokens": 7406,
        "total_tokens": 8622,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "They reduce it. Doubling the three load capacitors doubles the stage delay, so the oscillation frequency is halved. With the inverter sizes and supply unchanged, the power is about the same (P ≈ N C_L VDD² f0), and phase noise in the 1/Δf² region scales roughly as L(Δf) ∝ (kT/P)·(f0/Δf)². Therefore f0 → f0/2 gives L → L/4, i.e., about 6 dB lower phase noise.",
        "format": "markdown",
        "sha256": "44904d738a96e3eed9c5d59938b210d2c363202c465734d8dfb555afe0158f67"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling the capacitors halves the oscillation frequency and, at a fixed offset, reduces phase noise by about a factor of four (6 dB).",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1213,
        "output_tokens": 8157,
        "total_tokens": 9370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1213,
        "output_tokens": 8157,
        "total_tokens": 9370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the three load capacitors halves the oscillation frequency.  \nFor a ring oscillator, the white-noise phase noise roughly follows\nL(Δf) ∝ (f0/Δf)² / P. With device sizes and VDD unchanged, the dynamic power P ≈ C·V²·f0 is nearly constant, so halving f0 reduces L by a factor of four (≈ −6 dB) at a given absolute offset Δf.\n\nNote: at the same fractional offset (Δf/f0), the phase noise is approximately unchanged.",
        "format": "markdown",
        "sha256": "06700735df25f63c83d15ddf8964b1683f2404b57450a413d7c4e4ab7700550d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency, giving about a fourfold (6 dB) phase-noise reduction at a fixed absolute offset, and notes that the result is unchanged at a fixed fractional offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1213,
        "output_tokens": 7468,
        "total_tokens": 8681,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7296,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1213,
        "output_tokens": 7468,
        "total_tokens": 8681,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7296,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling all three CL’s doubles the stage delay, so the oscillation frequency is halved.  \nFor a current‑limited CMOS ring oscillator the noise that produces timing jitter is injected as current, while the node voltage noise scales as 1/C and the edge slope scales as 1/C as well. Hence the timing jitter per cycle is roughly unchanged.\n\nConsequences:\n- σt (rms time jitter): ≈ unchanged.\n- Phase noise L(Δf) at a fixed offset in Hz: improves by about 6 dB (since L ∝ f0^2 and f0 is halved).\n- At a normalized offset (Δf/f0): essentially no change.",
        "format": "markdown",
        "sha256": "986f876ddba8b0b69e14677f00a301dbd8494781949209d1d62b85226a5baed1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency, giving about a 6 dB phase-noise improvement at fixed offset and no change at fixed normalized offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1213,
        "output_tokens": 7785,
        "total_tokens": 8998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7616,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1213,
        "output_tokens": 7785,
        "total_tokens": 8998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7616,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. For any finite CL the 3‑inverter ring will still oscillate; it just gets slower.\n\nA ring oscillator can be modeled with each stage as an inverting gain with one pole:\nH(s) = −G/(1 + s/ωp), where ωp ≈ 1/(Rout·Ctot) ≈ gm/Ctot and Ctot includes CL.\nThe loop phase becomes zero at ω = √3·ωp and the magnitude there is (G/2)^3. Since a CMOS inverter has G > 2, the Barkhausen condition is met independent of CL.\n\nHence fosc ≈ (√3/2π)·ωp ≈ (√3/2π)·gm/Ctot ∝ 1/Ctot.\nAs CL increases, fosc decreases toward zero, but oscillation persists for any finite CL. Only in the unphysical limit CL = ∞ (or practical issues like leakage overwhelming the drive) would it stop.",
        "format": "markdown",
        "sha256": "e81eafbf698667e983cb62afbf665a17a068cdc8fac44a6886db211cc6ff2b38"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite the essential result. It assumes identical pole loading across all stages, missing that a very large capacitor on only one node creates a dominant pole and can reduce loop gain below unity, stopping oscillation. It correctly notes that loading slows the circuit, but does not capture the decisive asymmetry or failure mechanism.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1213,
        "output_tokens": 8042,
        "total_tokens": 9255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7808,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1213,
        "output_tokens": 8042,
        "total_tokens": 9255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7808,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. If CL is made very large the 3‑stage ring will eventually stop oscillating.\n\nReason:\n- Each inverter can be modeled as −A/(1 + jω/ωp). Loading the middle node with CL lowers its pole: ωp2 = 1/(Rout(C0 + CL)) ≪ ωp (the other two stages).\n- At the frequency where the total phase is 360°, the loaded stage contributes ≈90° and the other two ≈45° each, so ω ≈ ωp.\n- The loop‑gain magnitude at that frequency is then roughly\n  |L| ≈ (A/√2)^2 · (A·ωp2/ω) ≈ (A^3/2) · [C0/(C0 + CL)].\n- Oscillation requires |L| ≥ 1, giving an upper bound\n  CL ≤ (A^3/2 − 1) C0 (≈ (A^3/2)C0 for large A).\n\nAs CL → ∞, |L| → 0; the Barkhausen magnitude condition cannot be met and the loop settles to a dc operating point (no oscillation).",
        "format": "markdown",
        "sha256": "2c6704a67392c63c5aa924e2ee6b1b374ce86f93d67cfa488ee594f04dae3198"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large loading on one node can stop oscillation, and explains the dominant-pole gain roll-off and resulting failure of the Barkhausen condition. The approximate phase and gain analysis is consistent with the essential conclusion.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1213,
        "output_tokens": 10465,
        "total_tokens": 11678,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10176,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1213,
        "output_tokens": 10465,
        "total_tokens": 11678,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10176,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. A 3‑stage ring still oscillates for any finite CL. The extra capacitor only increases the propagation delay of the stage that drives it, so the oscillation frequency drops roughly as\n\nf ≈ 1 / [2 (tp1 + tp2 + tp3)] ≈ k / CL  (when the loaded stage dominates).\n\nAs CL → ∞ the delay → ∞ and the frequency → 0, i.e., in the limit it “stops,” but there is no finite value of CL at which oscillation suddenly disappears (assuming the driver can eventually charge/discharge the node and leakage is negligible).",
        "format": "markdown",
        "sha256": "6450e6f3135284dc0e063e4ce45613b84c0b24c77e69cadc398f3a2540aefe0a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that increasing CL slows the loaded stage, but its central conclusion is opposite to the golden solution: a sufficiently large one-node load creates a dominant pole and can violate the loop’s oscillation condition at a finite CL.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1213,
        "output_tokens": 12868,
        "total_tokens": 14081,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12672,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1213,
        "output_tokens": 12868,
        "total_tokens": 14081,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12672,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It decreases (improves) by about 3 dB.\n\nReason: Doubling W doubles both gm and the node capacitances. The delay and oscillation frequency stay roughly the same (I and C both double), but the stored energy E = ½CVDD² doubles. Phase noise for a ring oscillator scales approximately as kT/E, so with E → 2E the phase-noise power halves (≈3 dB better). Power consumption roughly doubles.",
        "format": "markdown",
        "sha256": "ca998ed4aa91607deed904b34f6252ab2b858ef5eb1dfcdf9b9d10122b45dad8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives an approximately 3 dB phase-noise reduction. Its energy-scaling explanation is consistent with the doubled node capacitance and swing, and it notes the roughly doubled power cost.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 4754,
        "total_tokens": 5694,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 4754,
        "total_tokens": 5694,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It decreases by about 3 dB.\n\nReason: Doubling W doubles both gm and the load capacitances. The oscillation frequency stays roughly the same (gm/C nearly unchanged), but the switched energy (and thus power) doubles: E ≈ ½ C VDD² → 2E. Since the phase noise of a ring oscillator is roughly proportional to kT/E (∝ 1/P), it is reduced by a factor of two (~3 dB).",
        "format": "markdown",
        "sha256": "17ecb2c3adb16d894126935a85b79d740f01ae00494307033faf182b50fff1e5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts about a 3 dB reduction and gives a consistent scaling argument: capacitance and switched energy double while frequency stays roughly constant.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 6074,
        "total_tokens": 7014,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 6074,
        "total_tokens": 7014,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It decreases by about 3 dB.\n\nReason: doubling W for both NMOS and PMOS doubles gm (and the thermal noise current) but also doubles the node capacitances, hence the stored energy qmax = C·VDD. The phase perturbation scales roughly as noise/energy ∝ gm/C^2, so with W → 2W we get (2)/(4) = 1/2. Thus the phase‑noise PSD is halved (~3 dB lower). Frequency stays roughly the same while power consumption doubles.",
        "format": "markdown",
        "sha256": "0460c1ad7f981cfcea8a76e208c5a3a3837b14f3742f635a0ea8416166232878"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives an approximately 3 dB reduction and recognizes that device noise grows while capacitance also doubles; the scaling yields half the phase-noise PSD. Calling qmax stored energy is a minor terminology error, not a substantive flaw.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 3866,
        "total_tokens": 4806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3712,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 3866,
        "total_tokens": 4806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3712,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Rx ≈ ∞\n\nReason: In a CMOS ring oscillator the inverters are supplied from the common VDD node. For small‑signal excitation at this node there is no first‑order conduction path from VDD to ground (ignoring finite ro and parasitic capacitances). A small perturbation of the supply only shifts the phase of the oscillation and does not draw incremental dc current. Hence the incremental conductance is zero and the resistance seen looking into the supply node is effectively infinite (open circuit).",
        "format": "markdown",
        "sha256": "9fce0bdc655b6ec4dc7aa0d711508059b9f58d38c01b90b4856316ec26081726"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The infinite-resistance claim ignores the oscillation-driven charging and discharging of the load capacitances, which draws supply current and sets the resistance. It offers only a static ideal-CMOS no-through-current observation, not the dominant mechanism; the result is approximately 1/(3 f0 CL).",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 936,
        "output_tokens": 10494,
        "total_tokens": 11430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10368,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 936,
        "output_tokens": 10494,
        "total_tokens": 11430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10368,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let the small-signal voltage applied at the supply node be vx.  \nModel each inverter with transconductances gmn and gmp and output\nresistances rn and rp to ground and VDD, respectively.\n\nFor any stage (all three are identical and the disturbance at VDD is\ncommon-mode), the output and the input of the next stage have the same\nincrement vo. Writing KCL at the output node of a stage,\n\n(1/rn + 1/rp) vo + (gmn + gmp) vo − (1/rp + gmp) vx = 0\n⇒ vo = [(1/rp + gmp)/(1/rp + 1/rn + gmn + gmp)] vx\n\nThe small-signal current drawn from VDD by one stage is\n\nix,1 = (vx − vo)/rp + gmp(vx − vo) = (1/rp + gmp)(vx − vo).\n\nHence for the three-stage ring,\n\nIx = 3(1/rp + gmp) [(1/rn + gmn)/(1/rp + 1/rn + gmn + gmp)] vx\n\nTherefore the incremental resistance seen into the supply node is\n\nRin = vx/Ix\n= [1/rp + 1/rn + gmn + gmp] / {3(1/rp + gmp)(1/rn + gmn)}.\n\nIf ro is large (rp,rn → ∞), this reduces to\n\nRin ≈ (1/3)(1/gmp + 1/gmn);\n\nfor matched devices (gmn ≈ gmp ≡ gm),\n\nRin ≈ 2/(3 gm).",
        "format": "markdown",
        "sha256": "658873375b2e2733528b8f69bcefc0c8f7157c31d18deb2315bbae1f67727127"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The derivation gives a static gm-based resistance and ignores the dominant supply current from oscillatory charging and discharging of the three load capacitances. The golden solution explicitly assigns this internally consistent static analysis a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 936,
        "output_tokens": 13559,
        "total_tokens": 14495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13184,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 936,
        "output_tokens": 13559,
        "total_tokens": 14495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13184,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the ring oscillator as a switched‑capacitor load for the supply.  \nEach stage charges its output capacitor from 0 to VDD once every period, so the charge taken from the supply per period is\n\nQ = VDD ΣCsw\n\n(ΣCsw = sum of the switched capacitances at the three outputs).  \nThe average current drawn is Iavg = fosc Q = fosc VDD ΣCsw, hence the small‑signal resistance seen into the supply node is\n\nRx = dVDD/dI ≈ 1/(fosc ΣCsw).\n\nIf all three stages have the same switched capacitance C, then Rx ≈ 1/(3 C fosc).\n\n(Short‑circuit and leakage currents neglected; valid for variations slower than fosc.)",
        "format": "markdown",
        "sha256": "41b740cb504182cbc1c0f2364a90638fc7534997f860a796428092fcca1cfa40"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies oscillation-driven charging of the three load capacitors and derives the accepted result, Rx ≈ 1/(3 C fosc), assuming fosc is fixed.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 936,
        "output_tokens": 5969,
        "total_tokens": 6905,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5760,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 936,
        "output_tokens": 5969,
        "total_tokens": 6905,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5760,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, it changes.\n\nThe expression RX ≈ (1/3)(1/gmn + 1/gmp) is the small‑signal resistance of the three inverters only if you linearize them at the (unstable) dc operating point where every stage sits at mid‑rail, so both devices in each inverter are on and each stage looks like two diode‑connected transistors in series. That is a time‑invariant, non‑oscillating operating point.\n\nOnce the loop is oscillating, the circuit is periodically time‑varying:\n- For most of the period one device in each stage is off (gm ≈ 0), so there is no continuous “two diode‑connected in series” path from VDD to ground. Current is drawn in short pulses during transitions.\n- The small‑signal impedance seen at the supply becomes time‑varying and frequency‑dependent. At very low perturbation frequencies, the effective resistance is 1/(∂Iavg/∂VDD), where Iavg is the average supply current of the oscillator; this is typically much larger than (1/3)(1/gmn + 1/gmp). Near harmonics of the oscillation frequency the impedance contains mixing terms and can even exhibit negative real parts.\n\nSo the simple (1/3)(1/gmn + 1/gmp) result applies only to the frozen, non‑oscillating bias; it is not valid for the running oscillator.",
        "format": "markdown",
        "sha256": "9ae17fc44768f9a6ab889624e6febd4b9dbfffc543a1340b8918a87c8c55828f"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that the static small-signal model does not describe the running oscillator, but reaches the wrong central conclusion: it says the resistance is typically much higher because devices are off. The supply current is set by charging and discharging node capacitances, leaving RX on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2032,
        "output_tokens": 13952,
        "total_tokens": 15984,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13312,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1016,
        "output_tokens": 6976,
        "total_tokens": 7992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. When the ring is actually oscillating the “three in parallel” argument no longer holds.\n\n- The expression RX ≈ (1/3)(1/gmn + 1/gmp) is the small‑signal resistance if every inverter is biased at its metastable point (input = output ≈ VDD/2), so each stage continuously looks like two diode‑connected MOSFETs in series. That is a DC operating point that a free‑running ring never occupies.\n\n- In oscillation, a CMOS inverter draws supply current only while it is switching (when both devices conduct). At any instant only a small number of stages are in that region; in a 3‑stage ring it’s roughly one stage at a time. Thus the instantaneous conductance seen at the supply toggles between “about 1/(1/gmn + 1/gmp)” (when one stage is switching) and near zero (when no stage is switching).\n\n- For low‑frequency perturbations of the supply, the effective resistance is set by the time average of this periodic conductance:\n  Rex,osc ≈ (1/(1/gmn + 1/gmp))^(-1) × (td/tc) = (1/gmn + 1/gmp) × (td/tc)\n  where tc is the interval during which a stage has both devices on and td is the stage delay. Since typically tc ≈ td, Rex,osc ≈ (1/gmn + 1/gmp).\n\nSo, compared with the “1/3” result, the oscillating ring’s effective supply resistance is roughly three times larger (and is time/frequency dependent). Only if you force all stages to mid‑rail simultaneously (i.e., not oscillating) does RX ≈ (1/3)(1/gmn + 1/gmp) apply.",
        "format": "markdown",
        "sha256": "ee471032b77db84e1a85de7a47e8c7d4d8c2737da1137fd912fb6ac3bd579de7"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that the static small-signal model does not describe the oscillating ring, but wrongly concludes that the supply resistance is about three times higher because devices are off much of the cycle. The resistance is set by charging and discharging node capacitances and remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2032,
        "output_tokens": 16472,
        "total_tokens": 18504,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15616,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1016,
        "output_tokens": 8236,
        "total_tokens": 9252,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7808,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: yes, it changes.\n\nWhy:\n- The expression RX ≈ (1/3)(1/gmn + 1/gmp) is only valid when every inverter is biased at its dc equilibrium with Vin = Vout (the unstable midpoint). In that special case each NMOS and PMOS is diode‑connected, so each stage looks like two diode-connected devices in series, and the three stages are in parallel at the supply node.\n\n- Once the ring is oscillating, the circuit is time‑varying. For most of the cycle, in each stage one device is off and there is essentially no dc path from VDD to ground; only during the brief switching intervals do both devices conduct. Hence the “input resistance” at the supply is not a constant; it is periodic in time and mostly very large, dropping only during the overlap intervals.\n\n- If you insist on a single low‑frequency number, it should be based on the cycle‑averaged slope of supply current with respect to VDD: RX,eff ≈ 1/(dIavg/dVDD) (equivalently VDD/(dPavg/dVDD)). This is generally much larger than (1/3)(1/gmn + 1/gmp) and depends on the actual waveforms and delay–vs–VDD of the ring.\n\n- More formally, the instantaneous conductance at the supply is\n  Gx(t) ≈ Σi [gmp,i(t)·gmn,i(t)]/[gmp,i(t)+gmn,i(t)],\n  which is near zero except when a stage commutates. Because the network is periodic, a small perturbation at the supply also mixes to sidebands at ωp ± kω0, so a single “RX” is not well defined during oscillation.\n\nConclusion: The given RX is the small‑signal result about the non‑oscillating midpoint. During oscillation the supply‑port impedance is time‑varying and, in any averaged sense, much larger than that value.",
        "format": "markdown",
        "sha256": "63c27d0e14bc3b953eb2c19e95b0ce8a4d01963d74f0a1e621265ed937d7fc54"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that oscillation invalidates the static midpoint analysis, but reaches the wrong central conclusion: it claims the effective resistance becomes much larger because devices are off. It misses that supply current is set by charging and discharging node capacitances, leaving RX on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2032,
        "output_tokens": 18788,
        "total_tokens": 20820,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1016,
        "output_tokens": 9394,
        "total_tokens": 10410,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8960,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It decreases.  \nM7 is the tail device. Making it wider increases the tail current and greatly reduces its output resistance (ro7). The small‑signal gain at the beginning of evaluation is roughly gm(in) × Rout with Rout ≈ ro1 || ro(load) || ro7. As W7 increases, ro7 drops, Rout falls, and the initial voltage gain becomes smaller (though the latch becomes faster).",
        "format": "markdown",
        "sha256": "a91151e22c9dfc6b70574623ed099838556bf38c90ab0e8f75826e9a4682811c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The trend and identification of M7 as the tail device are correct, but the explanation incorrectly treats ro7 as directly parallel with the output load. It misses the dominant integration-gain effect: increasing tail current lowers the gain factor such as gm/ICM.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 6144,
        "total_tokens": 7083,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 6144,
        "total_tokens": 7083,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It decreases. \n\nReason: M7 is the tail device. Making M7 wider increases the tail current and, more importantly, reduces its output resistance r_o7. The finite r_o7 appears as source degeneration for the input pair (M1–M2), so the effective small‑signal transconductance and hence the initial voltage gain are reduced (A0 ≈ gm_in·Rload / [1 + 2gm_in r_o7]). Thus, a wider M7 gives lower initial gain (though it speeds up regeneration).",
        "format": "markdown",
        "sha256": "2b1b773ed6140d0619ed7477c81130484aeb35303053130e00193481ca07ab54"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The trend is correct, and it notes that a wider M7 increases tail current. But the claimed output-resistance source-degeneration mechanism is incorrect for differential operation; moreover, its formula predicts that reducing r_o7 would increase gain. It misses the relevant decrease in gain as tail current rises.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 9695,
        "total_tokens": 10634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9536,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 9695,
        "total_tokens": 10634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9536,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It decreases.\n\nReason: A wider M7 provides a larger tail current. This raises gm of M1–M2 only as √I, but it reduces their output resistance ro ≈ 1/(λI). The initial small‑signal gain (≈ gm × Rout) therefore drops as M7 is made wider.",
        "format": "markdown",
        "sha256": "da372ead71f39f7f564577d1e86dd9d45ceba2025b78c28c68de8c2ba890b07b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The trend and increased tail current are correct, but the explanation relies on a static gm·Rout model. The initial StrongARM gain is better described by the integration gain, which scales roughly as gm/ICM; the answer therefore has a relevant modeling flaw despite reaching the right conclusion.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 10392,
        "total_tokens": 11331,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10304,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 10392,
        "total_tokens": 11331,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10304,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It decreases.  \nThe initial “pre‑amplification” is produced by the input pair discharging the P/Q nodes; the generated voltage is ΔV ≈ (gm·ΔVin · t)/Ceq, where Ceq includes the capacitances at P and Q. Increasing those capacitances makes Ceq larger, so a smaller voltage is developed at the start of regeneration, reducing the initial voltage gain (and slowing the decision).",
        "format": "markdown",
        "sha256": "810886f4a82f5b44e5a7b593aa52aedcb5e5a7663acc1a81b437b82ebaf0865f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the correct result. It considers the lower voltage slope for a fixed time but misses that larger capacitance proportionally lengthens the amplification phase, so the capacitance cancels in the initial gain; only the transient slows.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 6937,
        "total_tokens": 7876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6784,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 6937,
        "total_tokens": 7876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6784,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It decreases.  \nNodes P and Q are the integrating nodes for the input pair; the initial differential voltage that develops there is ΔV ≈ (ΔI·t)/C. Increasing the capacitance at P and Q makes this initial ΔV smaller, so the latch (M3–M6) is driven less strongly, reducing the initial voltage gain and slowing the regeneration.",
        "format": "markdown",
        "sha256": "225808d2ba3db6eba81bd6d316d93872d90ff87b0f6b56263b2e104b98a1ffcf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance slows the node ramp, but mistakes the voltage at a fixed time for the initial gain at regeneration onset. The longer amplification interval compensates for the smaller ramp, so the initial gain remains approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 5514,
        "total_tokens": 6453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5376,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 5514,
        "total_tokens": 6453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5376,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It decreases.  \nAt the start of evaluation the differential current from M1–M2 integrates on the capacitances at P and Q: d(ΔV_PQ)/dt ≈ gm·ΔVin / C_PQ. Increasing C at P and Q lowers this initial voltage change, so the seed signal to the latch (and hence the initial voltage gain) is reduced, making regeneration slower.",
        "format": "markdown",
        "sha256": "3bcb979561ab8925befe180ca90ea85a4899a200a0bccde3228cc718d63aa53a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The initial gain remains approximately unchanged: larger capacitance reduces the differential-voltage slope but proportionally extends the amplification phase, canceling its effect on gain. The answer mistakes the slower transient for a lower initial gain.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 5096,
        "total_tokens": 6035,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4992,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 5096,
        "total_tokens": 6035,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4992,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Neither strictly. Making M5/M6 wider has two opposite effects:\n\n- gm and pull‑up strength increase → stronger regeneration → potentially faster decision.\n- The parasitic capacitances at nodes X and Y (Cgd, Cdb) also increase → larger load → slower.\n\nSo speed improves when M5/M6 are too small, but beyond some width the added capacitance dominates and the latch slows. There is an optimum, usually when gm_p is comparable to the gm of the NMOS latch devices (M3/M4).",
        "format": "markdown",
        "sha256": "8ac575cdb5d32b7cfc394d3d6bf4e547a542c30e6a08bf1d37f563cb5125b013"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that wider M5/M6 initially strengthen regeneration and improve speed, while their added parasitic capacitance eventually limits the benefit and can cause an optimum. The extra gm-comparison detail is not needed but does not change the main conclusion.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 938,
        "output_tokens": 5410,
        "total_tokens": 6348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5248,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 938,
        "output_tokens": 5410,
        "total_tokens": 6348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5248,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Mostly improves — up to a point.\n\nM5 and M6 are the cross‑coupled PMOS of the regenerative latch. Making them wider increases their gm, so the positive feedback is stronger and the regeneration time constant τ ≈ CL/(gmn + gmp) becomes smaller → faster decision.\n\nHowever, wider M5/M6 also add capacitance to nodes X and Y (Cgs, Cgd, Cdb). If they are made too large, this extra CL starts to dominate and the speed can stop improving or even degrade, while power and kickback increase.\n\nSo a moderate increase speeds it up; oversizing can hurt.",
        "format": "markdown",
        "sha256": "b22c91ee48a3c4bca352a1724b6689d5f946d2b1a0d4601ddf3d40c8f2151df3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says widening M5/M6 initially speeds regeneration, while their added node capacitance eventually limits the benefit and may degrade speed.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 938,
        "output_tokens": 7799,
        "total_tokens": 8737,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7616,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 938,
        "output_tokens": 7799,
        "total_tokens": 8737,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7616,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: Usually faster, but only up to a point.\n\n- M5–M6 are the PMOS devices that take part in the regenerative latch. Making them wider increases their gm and reduces the latch time constant τ ≈ Ceff/(gm_n + gm_p), so the decision (regeneration) time gets shorter.\n- However, larger M5–M6 also add capacitance to nodes X and Y and make the precharge/evaluation nodes heavier. That extra C must be discharged before regeneration starts and can slow the first part of the transition and the reset.\n\nSo moderate upsizing of M5/M6 improves speed; oversizing eventually degrades it. There is an optimum size (often chosen so gm_p ≈ gm_n at the latch nodes).",
        "format": "markdown",
        "sha256": "022768bec7c661038ede03bdb5f4b23befc4d8bef96aa34fe500bc443436996a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M5/M6 initially improves speed by strengthening latch regeneration, while added node capacitance eventually limits the benefit and can cause degradation. The extra sizing details do not change the essential conclusion.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 938,
        "output_tokens": 5423,
        "total_tokens": 6361,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5248,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 938,
        "output_tokens": 5423,
        "total_tokens": 6361,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5248,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Degrade.\n\nUpsizing the CK/CK̅ devices reduces their on‑resistance, but it also increases their gate and diffusion capacitances. Those capacitances load the internal nodes X and Y and the clock line. The extra loading slows the clock edges and increases the RC time constants on X and Y, so the clock‑to‑Q delay gets worse. Thus, making the clocked transistors wider generally reduces speed (keep them only as large as needed for functionality).",
        "format": "markdown",
        "sha256": "b13f98b0c99ab06344ae814b2a0ab9478ad570b202824deb6d9167b45ed18628"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer recognizes that widening lowers on-resistance and adds capacitance, but concludes speed degrades. The golden solution says widening improves speed initially before added capacitance eventually limits or reverses the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 3833,
        "total_tokens": 4495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3712,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 3833,
        "total_tokens": 4495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3712,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Degrades.\n\nWidening the clocked transistors (those driven by CK/CK̅) reduces their on‑resistance, but it increases their diffusion/gate capacitances on the internal dynamic nodes X and Y and loads the clock more. In this topology the current is limited mainly by the diode‑connected devices (not by the clocked switches), so the added capacitance dominates. The RC on X/Y grows ⇒ longer settling time and slower operation. Keep the clocked devices near minimum size unless they are clearly the limiting resistance.",
        "format": "markdown",
        "sha256": "05c0d41037d5500cd97264cbc13b1feef0005a07062f242b690f87719a4c3d81"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that widening lowers clocked-device resistance and adds capacitance, but concludes speed degrades. The golden solution says speed improves initially as on-resistance falls, with added capacitance limiting or reversing the benefit only at larger widths.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 6639,
        "total_tokens": 7301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 6639,
        "total_tokens": 7301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Degrades.\n\nMaking the CK/CK̄ devices wider lowers their on-resistance, but it also increases their source/drain capacitances on the internal nodes X and Y (and loads the clock). The delay of these nodes is set by (Rseries of M1 + Rclock) × (Cnode). Since only part of the series resistance is reduced while Cnode grows roughly in proportion to width, the net RC (and hence the propagation delay) increases. Therefore the latch/gate is usually fastest with the clocked devices kept near minimum size.",
        "format": "markdown",
        "sha256": "c8945fc358e0ed3242f5b5a0d4f1c7882667de2b81aa6077e07f1b7508183f87"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that widening lowers clocked-device resistance and adds capacitance, but incorrectly concludes the speed degrades. The expected trend is initial improvement from reduced on-resistance, with added capacitance limiting or potentially reversing it at larger widths.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 5717,
        "total_tokens": 6379,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 5717,
        "total_tokens": 6379,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes.  \nThis is a ÷2 master–slave latch. The two internal outputs (nodes X and Y) update on opposite clock phases; therefore one changes a half clock period after the other. Since the divided output period is twice the clock period, this half‑clock delay corresponds to one quarter of the divided period (90°). Thus X and Y are in quadrature (their complements can be obtained with buffers such as Inv3).",
        "format": "markdown",
        "sha256": "3fe0d0ff5d4d805154ddf19556605f8801ded64207c30258ddeba8c2e24eabd5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal quadrature from the divide-by-two timing, but omits why the outputs are not exactly in quadrature: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 647,
        "output_tokens": 5296,
        "total_tokens": 5943,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5184,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 647,
        "output_tokens": 5296,
        "total_tokens": 5943,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5184,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes.  \nThis is a divide‑by‑2 implemented with two latches clocked by CK and CK̅. The two outputs (nodes X and Y) switch on alternate clock edges, i.e., they are separated by TCK/2. Since the output frequency is CK/2, that delay equals TOUT/4 = 90°, giving quadrature phases (and their complements; Z is just the inversion of Y).",
        "format": "markdown",
        "sha256": "daba864e087ba5c881ab1a62796a0292fb11a8c7652377b45b5f09a07057c9b0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from the latches switching half an input period apart, but omits the inverter delay and unequal latch loading that make the outputs not exactly quadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 647,
        "output_tokens": 5232,
        "total_tokens": 5879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5120,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 647,
        "output_tokens": 5232,
        "total_tokens": 5879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5120,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes.  \nThis is a master–slave divide‑by‑2 stage. The node X is the master output and Y (buffered to Z) is the slave output. Since the master updates on CK and the slave on CK̅, their transitions are separated by Tclk/2, which is a quarter of the divided output period. Thus X and Y (or X and Z) form a quadrature pair at fout = fCK/2.",
        "format": "markdown",
        "sha256": "e6a9a56963bd6244a0a746b37ed5ccc26c2598c0e22e2cb7e0a2a25fb21815e7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from the half-input-period separation, but omits the nonidealities that make the outputs not exactly quadrature: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 647,
        "output_tokens": 5229,
        "total_tokens": 5876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5120,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 647,
        "output_tokens": 5229,
        "total_tokens": 5876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5120,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends which clocked devices you enlarge.\n\n- Top PMOS (precharge, gated by CK̅): making them wider only increases the capacitance on the dynamic nodes. They are OFF during evaluation, so they don’t help the discharge; they just load the node. Result: evaluation becomes slower (though precharge gets faster).\n\n- Bottom NMOS (footer, gated by CK): these are in series with the pull‑down network during evaluation. Making them wider lowers the series resistance, so the discharge is faster (but the clock sees a larger capacitive load).\n\nIf you enlarge all the clocked transistors together, the added dynamic‑node capacitance from the PMOS usually dominates and the gate gets slower overall. Typical sizing: keep precharge PMOS small; size the NMOS footer just large enough for speed.",
        "format": "markdown",
        "sha256": "4da0a803291b5e15aea8f303436121457ea1df234547b512624a791913683f4c"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the clocked devices as precharge and footer transistors in a dynamic gate. In this topology, widening them lowers series resistance with little output loading, so speed improves; the answer reaches the opposite conclusion.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1324,
        "output_tokens": 11150,
        "total_tokens": 12474,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10752,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 5575,
        "total_tokens": 6237,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5376,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: up to a point it improves, but if you keep enlarging them it will hurt.\n\nWhy:\n- The clocked devices are in series with the pull‑up/pull‑down paths of the clocked inverters. Making them wider lowers their on‑resistance, so the D→Q delay of the latch gets smaller (faster).\n- But a wider clocked device adds gate and diffusion capacitance to the clock and internal nodes. That makes the clock heavier and slows its edges; beyond some size the extra capacitance dominates and overall timing degrades.\n\nSo, moderate upsizing improves speed; excessive upsizing degrades it due to clock loading. There is an optimum size (often a few times the inverter device width).",
        "format": "markdown",
        "sha256": "31ca2b0d479f9a3ed7ba0f375751a450e54355dfa7473d53f545e55d9c821356"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly predicts faster operation from reduced on-resistance, but omits charge sharing and instead attributes the eventual slowdown to clock loading.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1324,
        "output_tokens": 11804,
        "total_tokens": 13128,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11392,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 5902,
        "total_tokens": 6564,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Generally, it degrades.\n\nThe “clocked” devices (the PFETs and NFETs driven by CK/CK̄) mainly serve to precharge/reset the internal dynamic nodes. Upsizing them reduces their on‑resistance during reset, but it also increases their gate/drain capacitances on the critical internal nodes and loads the clock. During evaluation/regeneration these devices are off, so their lower RON does not help, while their added capacitance increases the time constant of the latch nodes, lengthening the clock‑to‑Q delay.\n\nOnly if reset time were the bottleneck would upsizing help; otherwise, larger clocked transistors usually make the circuit slower.",
        "format": "markdown",
        "sha256": "1db2270170ba651bc75df934b2d9bec1b43858e26206b0734ce53731a437d625"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion: widening the clocked devices improves speed by reducing series resistance while adding little loading to the data path. Its claim that the added capacitance makes the circuit slower misses the topology’s key effect.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1324,
        "output_tokens": 10492,
        "total_tokens": 11816,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10112,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 5246,
        "total_tokens": 5908,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It is a toggle (T) flip‑flop built with two complementary clocked switches and three inverters.\n\n- When CK = 1: the left switch is ON and the right switch is OFF. The first inverter forms the complement of the present output at its node (X = ¬Q), while the output Q is held.\n- When CK = 0: the left switch turns OFF and the right switch turns ON. The value stored at X is transferred through the two following inverters to the output. Because there are two inverters, Qnew = X = ¬Qold.\n\nTherefore the output toggles on each clock cycle (on the falling edge), i.e., it divides the clock frequency by two.",
        "format": "markdown",
        "sha256": "d78da33df986799f9341f00bb4764169f23015854b4d2591b686d85d4ceca169"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the toggle divider, describes clocked storage and feedback toggling, and concludes that the output frequency is half the clock frequency.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 923,
        "output_tokens": 6647,
        "total_tokens": 7570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 923,
        "output_tokens": 6647,
        "total_tokens": 7570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a clocked‑inverter latch.\n\n- The two little “switches’’ are transmission gates driven by CK and CK̅.  \n- Inv1 is the forward inverter of the latch; the two rightmost inverters form a non‑inverting buffer used for the feedback path.\n\nOperation\n- CK = 1: the left TG (CK) is ON and the right TG (CK̅) is OFF. The latch is transparent: the node at the input of Inv1 follows the signal coming from the previous stage (through the left TG) and is inverted by Inv1. The feedback is open.\n- CK = 0: the left TG is OFF and the right TG is ON. The input is isolated and the output of Inv1 is fed back through the two inverters to the input of Inv1. Because there are two inversions in the feedback path, the loop is non‑inverting and the value is held (static storage).\n\nThus the arrangement implements a level‑sensitive D‑latch (a “clocked inverter with feedback”). Two such latches in series give an edge‑triggered flip‑flop.",
        "format": "markdown",
        "sha256": "c3f57ea198ea58a19767d202cdd821f7cdbe8ef35f06cee18f7ffbb9a5c6ba9f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes clocked inverters and transmission gates, but misidentifies the overall circuit as a static level-sensitive latch rather than a dynamic-latch divide-by-two circuit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 923,
        "output_tokens": 8769,
        "total_tokens": 9692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8512,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 923,
        "output_tokens": 8769,
        "total_tokens": 9692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8512,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "- The loop contains an odd number of inversions (Inv1 + two more), but the loop is broken by two transmission gates driven by complementary clocks CK and CK̅.\n\nOperation:\n- CK = 1: the left switch closes and the right one opens. The node at the input of Inv1 is forced to the previous output R, so Inv1 produces B = ¬R. The output R does not change in this phase.\n- CK = 0: the left switch opens and the right one closes, connecting B to the remaining two inverters. Since there are two (an even number) of inverters after the switch, the value propagated to R becomes Rnew = B = ¬Rold.\n\nThus, on every clock cycle the output toggles: R(n+1) = ¬R(n). The circuit behaves as a T flip‑flop (a divide‑by‑2), producing a 50% duty‑cycle output at half the CK frequency. Non‑overlap between CK and CK̅ is required; otherwise both switches on simultaneously would form a 3‑inverter ring oscillator.",
        "format": "markdown",
        "sha256": "b73d136307eb34a4b54f6f69e024a094c2801bca46ba199870c0606dca87989b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the clocked feedback circuit as a divide-by-two and explains the alternating phases that make the output toggle once per input cycle. Its transmission-gate and inverter description captures the dynamic-latch operation; the extra non-overlap detail is not material.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 923,
        "output_tokens": 4885,
        "total_tokens": 5808,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 923,
        "output_tokens": 4885,
        "total_tokens": 5808,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It is the “keeper” (feedback) inverter.  \n- When CK is low (the left switch open and the right one closed), Inv1 and the red inverter are connected back‑to‑back and form a static latch that holds the value. Without it the node at the input of Inv1 would float (dynamic storage).  \n- When CK is high (sampling), the stage is transparent. The keeper still drives the previous value for about one inverter delay, so the new data must overcome it. This adds load and brief contention, increasing delay and power slightly.\n\nSo the red inverter makes the stage robust (static retention, better noise immunity) at the cost of a small speed penalty; it is usually made weak to limit its impact on performance.",
        "format": "markdown",
        "sha256": "e40306a5a7e208a8d435a69c102dc91a292d3494b6f2d8bd91e16d56ab25df8b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the red inverter as a keeper forming a static latch. In fact, it creates an unclocked feedforward path that bypasses part of the first latch and improves high-speed operation, while raising the minimum usable clock frequency at low rates.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 8464,
        "total_tokens": 9392,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 8464,
        "total_tokens": 9392,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is a feedback (keeper) from the output of Inv1 to its input.  \n- Functionally it turns the first stage into a small latch so the node at the input of Inv1 is not left floating when CK and CK̅ open alternately; it improves robustness/noise immunity and makes start/stop reliable.  \n- Cost: the output of Inv1 now drives one more gate (the red inverter), so the load on that node increases. This increases the propagation delay of that stage (and the ring), lowering the maximum frequency and adding a little dynamic power/area.\n\nSo it improves stability/retention but slightly degrades speed.",
        "format": "markdown",
        "sha256": "cbd46e3c52a229ea580f520ef45cd41cef0c220d0706ba63a4f4a012deb70a39"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the red inverter as a feedback keeper. The actual feedforward path bypasses part of the first latch and improves high-speed operation, while raising the minimum usable clock frequency at low rates; the answer gives the opposite mechanism and speed conclusion.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 7276,
        "total_tokens": 8204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 7276,
        "total_tokens": 8204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is a “keeper” that makes the first delay cell a latch.  \nWith CK low (ring disabled), the input switch is open and the feedback path through the red inverter closes, so Inv1 and the red inverter form a cross‑coupled pair that holds the last state of the ring. This allows the oscillator to be stopped and restarted cleanly and quickly, without the input node floating.\n\nWhen CK is high (ring running) the feedback is disabled and the stage behaves like a normal inverter; the red inverter only adds a small extra capacitive load, so the main effect on performance is a slight increase in delay (slightly lower oscillation frequency), but it greatly improves start/stop robustness.",
        "format": "markdown",
        "sha256": "e3ed3a4b280bb98ca74efb46ac3edd029912720b7751ef7a5d171daf2a370252"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the red inverter as a keeper and describes a feedback latch, rather than the unclocked feedforward path that bypasses part of the first latch. It also misses the speed benefit and reverses the low-frequency tradeoff.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 6214,
        "total_tokens": 7142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 6214,
        "total_tokens": 7142,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Partly agree, but “keeper” is not the best description.\n\nThe two switches controlled by CK/CK̅ isolate the stage Inv1 from the rest of the ring on one side or the other. When the left switch is open, the input of Inv1 would be a floating (dynamic) node. The red inverter feeds back the output of Inv1 to its input, so Inv1 and the red inverter form a cross‑coupled pair that holds the node at a valid logic level whenever the stage is isolated. In other words, this stage becomes a latch in the hold phase and the ring can be paused for an arbitrarily long time without drift.\n\nSo the real role of the red inverter is to provide static feedback and prevent a floating node when the transmission gate is open, enabling glitch‑free stop/hold/restart of the gated ring oscillator. A side effect is that there is no minimum clock‑frequency requirement due to leakage.",
        "format": "markdown",
        "sha256": "38bb47ff2577d599f65f3e7c17ff3e8cc2fae28ba0f110986300dbef2546e0b2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly treats the red inverter as cross-coupled feedback that holds a floating node. It misses the actual feedforward path, which bypasses part of the latch path and can raise the minimum usable clock frequency at low rates.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 973,
        "output_tokens": 12275,
        "total_tokens": 13248,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12032,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 973,
        "output_tokens": 12275,
        "total_tokens": 13248,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12032,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. I don’t agree.\n\nAs drawn, the red inverter is in the forward path (from the node before CK to the node after Inv1). It does not feed back from the output of Inv1 to its input, so it does not form a cross‑coupled latch and it does not eliminate the minimum clock‑frequency requirement. The input of Inv1 is still a floating (dynamic) node when CK opens and will leak.\n\nThe red inverter simply provides an additional forward driver for the node at the output of Inv1 (i.e., it strengthens/speeds that node and keeps it well defined during the clock phases). A true “keeper” that removes the min‑frequency requirement would have to be connected the other way: from the output of Inv1 back to its input across the CK switch.",
        "format": "markdown",
        "sha256": "0c8d53eea4df1c825a1fc6c88a48e5e967ad348b1749ff6f03e5e7421c4d526f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies a forward path from before CK to Inv1’s output. However, it misses the key unclocked-loop behavior: at low clock rates the feedforward branch can overpower the intended latch and raise the minimum usable frequency. Calling it simply a benign driver and attributing the limitation to leakage misses the dominant mechanism.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 973,
        "output_tokens": 13105,
        "total_tokens": 14078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 973,
        "output_tokens": 13105,
        "total_tokens": 14078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No.\n\nThat inverter is not a “keeper”. A keeper would hold the floating dynamic node (the node at the output of Inv1 when the CK̄ switch is open). The red inverter is not connected to that node in the hold phase, so it cannot prevent leakage there, and the circuit still has a minimum clock‑frequency requirement.\n\nWhat the red inverter really does is force the node on the left side of the CK switch to be the complement of the output of Inv1 while CK is open. Then, when the clock toggles (CK closes and CK̄ opens), the input of Inv1 is guaranteed to be the opposite of its current output, which launches a transition into the delay line. In short, the red inverter guarantees that a transition is generated on every clock edge (a “kick start”/edge‑injection function), not a leakage‑keeper.",
        "format": "markdown",
        "sha256": "17dee6d2a7cf1521a53365cced8fa5e6034b7bc190b8385dacdc838c751cb575"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly rejects the keeper interpretation, but reverses the branch’s role: the red inverter feeds forward from before the CK switch to Inv1’s output, rather than forcing the pre-switch node from that output. It misses the actual high-speed benefit and low-frequency interference tradeoff.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 973,
        "output_tokens": 11694,
        "total_tokens": 12667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 973,
        "output_tokens": 11694,
        "total_tokens": 12667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: with this shunt‑feedback LNA you cannot do better than about 3 dB when the input must be 50 Ω.\n\nReason\n- The 50 Ω input is obtained by the feedback resistor: Rin ≈ Rf/(1+Av).  \n- The thermal noise of Rf is transformed by the loop so that, referred to the input, it is essentially the noise of a real resistor equal to Rin.  \n- With Rin matched to the source Rs = 50 Ω, the amplifier already adds an input‑referred noise equal to the source noise, giving a lower bound NFmin = 1 + Rin/Rs = 2 (≈3 dB), even if the transistors were noiseless.\n\nOptimization under Rin = 50 Ω\n- Make the device noise as small as possible (increase gm of M1, reduce gate resistance, use quiet bias/load).  \n- Choose Rf = 50·(1+Av) to keep the 50‑Ω match as gm or gain changes.  \n- The NF can be approximated by F ≈ 2 + γ/(gm·50) (+ small extras from Rg, ro, etc.), so larger gm lowers NF but it asymptotically approaches 3 dB.\n\nTo obtain NF < 3 dB you need a different topology (e.g., resonant/transformer match, noise‑cancellation, feed‑forward, etc.), not this simple resistive‑feedback match.",
        "format": "markdown",
        "sha256": "efc412ed62a0de133eb445521662c31544d31141b012edf1a10a6141b402756e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly suggests increasing gm and adjusting Rf to preserve the match, but its central conclusion is wrong: finite output resistance lets gm exceed 1/Rs and NF fall below 1 + gamma. The claimed 3 dB floor and need for a different topology miss the key mechanism.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 9410,
        "total_tokens": 10350,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9088,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 9410,
        "total_tokens": 10350,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9088,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Key idea: keep the 50 Ω input match with the feedback resistor and then make the loop‑gain as large as you can. A larger loop‑gain both allows a larger RF (so its thermal noise is smaller) and reduces the input‑referred noise of the output/load. With the match enforced, the NF then decreases monotonically as gm increases.\n\n1) Input match\nIgnoring Cgs at the band of interest and denoting by Ro the small‑signal resistance seen at the drain (≈ ro1 || ro2 || RD), the input impedance of the shunt‑feedback CS stage is\nRin = (RF + Ro) / (1 + gm·Ro).\nTo keep Rin = 50 Ω,\nRF = 50·(1 + gm·Ro) − Ro\n(≈ 50·(1 + gm·Ro) if RF ≫ Ro).\n\n2) NF trend\nWith that constraint, the main input‑referred noise terms are\n- M1 channel noise ≈ 4kT·γ/gm (referred to input as a voltage), which falls with gm.\n- RF thermal noise, which is reduced by feedback; with the 50‑Ω constraint RF grows with gm (from the equation above), so its contribution also drops as gm increases.\n- Noise from the load (Ro, M2) is divided by (1 + gm·Ro)², hence reduced by larger loop‑gain.\n\nTherefore, for a fixed 50‑Ω match the NF is minimized by maximizing gm (and Ro). In practice:\n\n- Use as large gm as your power budget allows (wide device, operate in moderate/strong inversion).\n- Increase Ro (e.g., use a high‑ro PMOS load and/or cascode M1).\n- After gm and Ro are chosen, compute RF from RF = 50·(1 + gm·Ro) − Ro.\n- Keep gate resistance low (multi‑finger layout), and make RF as large as allowed by the above equation.\n\nAs gm·Ro → ∞ the NF approaches ≈ 1 + γ/(gm·50). Thus the recipe is: maximize gm (and Ro), then set RF to keep Rin = 50 Ω.",
        "format": "markdown",
        "sha256": "f1a6c8ef36c2b60e91577ef59bd68a59cd9bdd4a7885b9eff6b7e86a8ee791e6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly includes finite output resistance in the input-match relation, adjusts RF to hold Rin at 50 Ω, and identifies increasing gm (and gmRo) as the way to reduce NF below 1 + γ. The stated high-gain trend agrees with the golden solution; the extra implementation suggestions do not change the central result.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 13315,
        "total_tokens": 14255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12800,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 13315,
        "total_tokens": 14255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12800,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Main idea: make the loop gain as large as possible and choose RF so that the input stays matched.\n\n- For the shunt–shunt (resistive‑feedback) LNA the input resistance is\n  Rin ≈ RF / (1 + Aol) with Aol ≈ gm1·RL.\n  With M2 diode–connected, RL ≈ 1/gm2 ⇒ Aol ≈ gm1/gm2.\n  To keep Rin = 50 Ω:\n  RF = 50·(1 + gm1/gm2).                                  (1)\n\n- The dominant added noises are from M1 (4kTγgm1), the feedback resistor RF\n  and the load device M2 (4kTγgm2). A convenient approximation for the\n  noise factor with RS = 50 Ω is\n  F ≈ 1 + γ/(gm1RS) + RS/RF + γ gm2 RS.\n  Using (1):\n  F ≈ 1 + γ/(gm1RS) + 1/(1 + gm1/gm2) + γ gm2 RS.          (2)\n\n- From (2), F decreases when:\n  • gm1 increases,\n  • gm2 decreases,\n  • RF increases (which is automatic when gm1/gm2 increases).\n\nPractical recipe to minimize NF with Rin fixed at 50 Ω:\n- Maximize gm1 (wide M1, small Vov1, and/or higher bias current – within\n  linearity and power limits).\n- Minimize gm2 (use a small M2 with large |Vov2| so that gm2 is small).\n- Then set RF from (1) to keep Rin = 50 Ω (RF typically ends up in the\n  kΩ range).\n- Use a large C1 and a low gate resistance (multi‑finger M1) to avoid\n  extra noise/mismatch.\n\nIn the limit of large loop gain (gm1/gm2 → ∞), the achievable NF tends to\nFmin ≈ 1 + γ/(gm1·50 Ω); hence the best NF is obtained by making gm1 as\nlarge as practical while keeping gm2 as small as practical and choosing RF\naccordingly.",
        "format": "markdown",
        "sha256": "ba27f1c78cfcb756e7afa39c98769e126136350217ff89ce2e0c12095468535b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recommends increasing transconductance, raising RF to preserve the match, and predicts NF can fall below 1 + γ. But it treats M2 as a diode-connected load and bases the match and noise trends on gm1/gm2, rather than the inverter’s total gm and finite output resistance—the key mechanism in the golden solution. Minimizing gm2 is therefore not justified for this circuit.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 16794,
        "total_tokens": 17734,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16320,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 16794,
        "total_tokens": 17734,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16320,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Rin is the small‑signal resistance seen at node P (the source of M1).  \nWith the drain of M1 “regulated” by the gain stage M2 (load RD1), the source resistance of a common‑gate device is reduced by the loop gain. Hence\n\nRin ≈ 1 / [ gm1 (1 + Areg) ]  \nAreg ≈ gm2 (RD1 || ro2)\n\n(ignoring ro1 and assuming the bias network only provides dc bias).\n\nSo, to first order:\nRin ≈ 1 / { gm1 [ 1 + gm2 (RD1 || ro2) ] }.\n\nIncluding the sensor capacitance Cin at the input, the impedance seen by the source is\nZin ≈ Rin || 1/(s Cin).",
        "format": "markdown",
        "sha256": "00ad30b40d31556d1fb6593cabec42c07bec8403cd71ade83f2de3c84a176bbb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer uses a different common-gate input-resistance model and omits the feedback resistor’s output-side resistance. It misses the required result, Rin = (RF + RD2)/(1 + A0), with A0 defined by the unloaded two-stage gain.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 11509,
        "total_tokens": 11736,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 11509,
        "total_tokens": 11736,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let vp be the small–signal voltage at the input node P (the source of M1).  \nIgnoring ro’s and taking M3 as an ideal common‑gate device so that the signal\ncurrent from M2 appears at RD2:\n\n1) M1: id1 = −gm1 vp ⇒ vx = −RD1 id1 = gm1 RD1 vp  \n2) M2: id2 = gm2 vx = gm1 gm2 RD1 vp  \n   The current is conveyed to RD2 by M3, hence  \n   vout = − id2 RD2 = − gm1 gm2 RD1 RD2 vp ≡ −A vp, with A = gm1 gm2 RD1 RD2\n\nKCL at node P gives (currents leaving P):\niin = gm1 vp + (vp − vout)/RF + s Cin vp\n\nTherefore the input admittance is\nYin = iin/vp = gm1 + (1 − vout/vp)/RF + s Cin\n     = gm1 + (1 + A)/RF + s Cin\n\nand the input impedance is\nZin = 1 / [ gm1 + (1 + gm1 gm2 RD1 RD2)/RF + s Cin ].\n\nLow‑frequency (Cin ≈ 0) and large loop‑gain (A ≫ 1, A ≫ gm1 RF):\nRin ≈ RF / (gm1 gm2 RD1 RD2).\n\nIf RF → ∞ (no feedback), Rin → 1/gm1 in parallel with 1/(s Cin), as expected for a common‑gate input.",
        "format": "markdown",
        "sha256": "c28d654fe1fcecf9dd5523020115be212d31575c63963ecc6d2e66a83675f6cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that feedback lowers the input resistance and gets an approximate inverse-loop-gain dependence. But it uses a common-gate input model with a 1/gm1 shunt, gives the wrong gain, and omits the output-side RD2 term; its RF→∞ limit also contradicts the golden model. The required exact result is (RF + RD2)/(1 + A0).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 19798,
        "total_tokens": 20025,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19392,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 19798,
        "total_tokens": 20025,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19392,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The input node is the source of M1 (common–gate input).  \nWith the drain of M1 “regulated” by the gain-boosting transistor M2, the effective transconductance of M1 is multiplied by the gain of the regulating amplifier. Thus the small‑signal input resistance seen at node P is\n\nR_in ≈ 1 / [ gm1 (1 + Areg) ]\n\nwhere Areg is the small-signal gain of the regulating stage (M2).  \nWith M2 a CS amplifier loaded by a high resistance (current source), Areg ≈ gm2 ro2 (more generally, ro2 in parallel with any load such as RD1).\n\nTherefore,\n\nR_in ≈ 1 / [ gm1 (1 + gm2 (ro2 || RD1)) ] ≈ 1 / [ gm1 (1 + gm2 ro2) ].\n\nThis is much smaller than the 1/gm1 input resistance of a simple common-gate stage.",
        "format": "markdown",
        "sha256": "cb69d4500a1f86292814961b6e0f248636039da555d6cdb032d9f19ff1b2090a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology as a gain-boosted common-gate stage and omits the feedback resistor. It misses the required Miller result, Rin = (RF + RD2)/(1 + A0), and the two-stage unloaded gain defining A0.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 8826,
        "total_tokens": 9053,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8576,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 8826,
        "total_tokens": 9053,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8576,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the LDO noise as supply‑voltage noise that FM‑modulates the VCO through its supply‑pushing sensitivity.\n\n1) Find the VCO supply‑pushing coefficient\n   Kpush = ∂f0/∂Vout  [Hz/V] \n   (obtain by small sweep of Vout in sim/measure).\n\n2) The frequency‑noise PSD produced by the LDO is\n   SΔf(f) = Kpush^2 · Sth(f)   [Hz^2/Hz].\n\n3) Since dφ/dt = 2π·Δf(t) ⇒ φ(j2πf) = (Kpush/f)·Vout_n(j2πf),\n   the output phase‑noise PSD is\n   Sφ(f) = (Kpush^2 / f^2) · Sth(f)   [rad^2/Hz].\n\n4) The usual single‑sideband phase noise is\n   L(f) = 0.5 · Sφ(f) = 0.5 · (Kpush^2 / f^2) · Sth(f)   [dBc/Hz in linear units].\n(If any supply filtering/PSRR exists between the LDO and the VCO, multiply Sth by |Hsup→VCO(f)|^2 first.)",
        "format": "markdown",
        "sha256": "1d571735bb0631c04af95de7be0996c07b6e9997e8fdc5fa9560750cbf763789"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly converts LDO supply noise through Kpush into frequency noise and then phase noise with the 1/f² dependence, including the SSB factor. It omits the stated design insight that the direct varactor supply sensitivity makes Kpush closely related to KVCO, so reducing KVCO reduces this conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 943,
        "output_tokens": 6588,
        "total_tokens": 7531,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 943,
        "output_tokens": 6588,
        "total_tokens": 7531,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the LDO output noise as a small supply variation vn(t) applied to the VCO. A change in supply shifts the oscillation frequency (supply–pushing). Let\n\nKps = ∂f0/∂Vout  [Hz/V]  (pushing coefficient).\n\nThen the instantaneous frequency deviation is Δf(t) = Kps vn(t) and the phase\nperturbation is\n\nφn(t) = 2π ∫ Δf(t) dt = 2π Kps ∫ vn(t) dt.\n\nIn the frequency domain the transfer from supply noise to phase is\n\nHφ,vdd(j2πf) = Kps/(jf).\n\nTherefore the VCO phase‑noise PSD due to the LDO thermal noise Sth(f) (V^2/Hz) is\n\nSφ(f) = (Kps^2 / f^2) Sth(f)   [rad^2/Hz].\n\nSingle‑sideband phase noise (dBc/Hz):\nL(f) = 10·log10{ 0.5 · [Kps^2 / f^2] · Sth(f) }.\n\n(Include any supply filtering between the LDO and VCO by multiplying Sth by |Hfilter(j2πf)|^2.)",
        "format": "markdown",
        "sha256": "9b12296d5081e13fe2eb94d15a2961f72456005eac0779caa03554b3979745d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly derives supply-pushing frequency noise, integrates it to phase noise, and gives the matching 1/f² PSD and SSB relation. It omits the circuit-specific insight that Kpush is closely related to KVCO because supply noise acts directly on the varactors.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 943,
        "output_tokens": 8137,
        "total_tokens": 9080,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7808,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 943,
        "output_tokens": 8137,
        "total_tokens": 9080,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7808,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the LDO output noise as a small supply‑voltage noise vn(t) with one–sided PSD Sth [V^2/Hz].  \nA supply perturbation changes the oscillation frequency (pushing). Let\n\nKpush = ∂f0/∂Vout [Hz/V]  (or ∂ω0/∂Vout in rad/s/V).\n\nThen the frequency‑noise PSD caused by the LDO is\nSΔf(f) = Kpush^2 Sth.\n\nSince phase is the integral of frequency, the phase‑noise PSD is\n\nSφ(f) = SΔf(f)/f^2 = Kpush^2 Sth / f^2\n      = (∂ω0/∂Vout)^2 Sth / (2π f)^2.\n\nThe single‑sideband phase noise is\nL(f) = 0.5 × Sφ(f).\n\n(Use Sth(f) if the LDO noise is frequency dependent; this expression captures the dominant supply‑pushing path.)",
        "format": "markdown",
        "sha256": "60450439eb11a09fbf63ef96e69eaee1942c40f968955f568c195fb0c5e61b92"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing and converts the LDO noise to phase noise with the expected 1/offset-frequency-squared dependence. It omits the circuit-specific insight that the supply perturbation acts directly on the varactors, making Kpush closely related to KVCO.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 943,
        "output_tokens": 6707,
        "total_tokens": 7650,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 943,
        "output_tokens": 6707,
        "total_tokens": 7650,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It improves (decreases), mainly at close-in offsets.\n\nThe tail capacitor makes node P an ac‑ground at even harmonics (≈2ω0). This suppresses the 2ω0 voltage ripple at the tail, so the noise of the tail current source and the modulation of the pair’s gm are not efficiently mixed to the carrier. Thus the upconversion of flicker noise is strongly reduced. Far‑from‑carrier (thermal/Q‑limited) phase noise changes little.",
        "format": "markdown",
        "sha256": "9aec3c05f7c1a02cb182073d3f7dc68e1f1fa388c39a968b02d1274b93f44aec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives a monotonic improvement claim based on tail-node filtering, missing the nonmonotonic class-C benefit and possible degradations from flicker-noise upconversion or excessive CT.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 656,
        "output_tokens": 3738,
        "total_tokens": 4394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3584,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 656,
        "output_tokens": 3738,
        "total_tokens": 4394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3584,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It improves (decreases), mainly close to the carrier. \n\nAdding CT makes the tail node an AC ground at ω0 and especially at 2ω0, so:\n- The 2ω0 current pulses of the switching pair are shunted to ground and the tail‑node voltage ripple is suppressed.\n- Noise of the tail current source (particularly 1/f) is prevented from mixing with the 2ω0 component and from being up‑converted to phase noise.\n\nHence the 1/f^3 (close‑in) phase noise is reduced; the far‑from‑carrier (1/f^2, tank‑limited) noise is largely unchanged.",
        "format": "markdown",
        "sha256": "9842e1d242f71d49ddc418348a48c55ccc483a3b14038d903296eacd6bdb5d2a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims a monotonic phase-noise improvement from filtering the tail node, missing the nonmonotonic effect and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 656,
        "output_tokens": 3617,
        "total_tokens": 4273,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 656,
        "output_tokens": 3617,
        "total_tokens": 4273,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It improves.  \n\nA capacitor at the tail makes node P an AC ground (especially at 2ω0), so the common‑mode swing at the sources is reduced. The noise of the tail current source is then shunted to ground and its low‑frequency (1/f) noise is not up‑converted by the 2ω0 pumping. As a result the close‑in phase noise drops (white‑noise floor changes little).",
        "format": "markdown",
        "sha256": "25f8199f020712696390214cd1f2c6e26872825c7f1c1569fa4d4480d67b3028"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It claims CT improves phase noise monotonically through tail-node filtering, missing the nonmonotonic effect and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 656,
        "output_tokens": 6993,
        "total_tokens": 7649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6848,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 656,
        "output_tokens": 6993,
        "total_tokens": 7649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6848,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "About the tank resonance. Each core is a cross‑coupled LC oscillator, and the coupling between the two cores does not appreciably shift the resonance. Thus the oscillation frequency is approximately\n\nf_osc ≈ 1 / (2π √(L · C_eff)),\n\nwhere L is the inductance of each coil and C_eff is the total capacitance seen at each node (varactor plus parasitics/coupling).",
        "format": "markdown",
        "sha256": "c22a63923f9f7ae099c69e6cda4ac486476f780e501cd55d23d6d2868d556d4d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The tank-resonance estimate is relevant, but the answer incorrectly says coupling does not appreciably shift the frequency and omits the required coupling-induced shift.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 8370,
        "total_tokens": 9298,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 8370,
        "total_tokens": 9298,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It is a pair of cross‑coupled LC cores (a QVCO). The oscillation frequency is set by the resonance of each LC tank; the coupling transistors only lock the phases.\n\nLet L be the inductance of one coil and let C_d be the total differential capacitance between the two tank nodes (varactors + parasitics). For differential operation the two inductors appear in series, so L_diff ≈ 2L. Hence\n\nf_osc ≈ 1 / [2π √(L_diff C_d)] ≈ 1 / [2π √(2 L C_d)].\n\nEquivalently, if C_se is the capacitance to ground per node (C_se = 2 C_d), then\nf_osc ≈ 1 / [2π √(L C_se)].",
        "format": "markdown",
        "sha256": "be4989f316b434e9eefe62f0c0a3a38c0819f4d5c223a7f1f033e7033e2a80a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the LC tank resonance, but incorrectly says the coupling transistors only lock phase. The required estimate includes a coupling-induced frequency shift, approximately Δω = αω₀/(2Q); omitting it misses the central result.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 9157,
        "total_tokens": 10085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8960,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 9157,
        "total_tokens": 10085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8960,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It is a pair of cross‑coupled LC oscillators (a QVCO). To first order the oscillation frequency is set by the resonance of each LC tank, i.e.\n\nfosc ≈ 1/(2π√(L Ceq))\n\nwhere L is the inductor in each branch and Ceq is the total shunt capacitance at each node (tuning varactor plus parasitics and the coupling capacitors to the other core).",
        "format": "markdown",
        "sha256": "ddc75e25cd95202948374a7a65f932e06d0cf5e99a8195dda5ab625420b107b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the LC tank resonance as the baseline, but omits the coupling-induced frequency shift that is central to the estimate. Treating coupling capacitors as part of a shunt capacitance does not capture that shift.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 6738,
        "total_tokens": 7666,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6592,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 6738,
        "total_tokens": 7666,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6592,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
