{
  "model_key": "gpt_51",
  "display_name": "GPT-5.1",
  "provider": "openai",
  "evaluation_model_ids": [],
  "thinking_effort": "high",
  "configuration_note": "GPT-5.1 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (openai/gpt-5.1) at reasoning effort high, the highest it offers. Requests set max_tokens to 128,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for GPT-5.1 on 2026-11-10 ($1.25 input, $0.125 cached input, $10.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 59,
          "incorrect_count": 91,
          "partial_credit_count": 59,
          "zero_count": 32,
          "mean_score_0_to_4": 2.2,
          "score_percent": 55.00000000000001,
          "score_distribution": {
            "0": 32,
            "1": 33,
            "2": 17,
            "3": 9,
            "4": 59
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 59,
          "incorrect_count": 91,
          "partial_credit_count": 59,
          "zero_count": 32,
          "mean_score_0_to_4": 2.2,
          "score_percent": 55.00000000000001,
          "score_distribution": {
            "0": 32,
            "1": 33,
            "2": 17,
            "3": 9,
            "4": 59
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 46,
          "incorrect_count": 44,
          "partial_credit_count": 15,
          "zero_count": 29,
          "mean_score_0_to_4": 2.311111111111111,
          "score_percent": 57.77777777777777,
          "score_distribution": {
            "0": 29,
            "1": 9,
            "2": 3,
            "3": 3,
            "4": 46
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 46,
          "incorrect_count": 44,
          "partial_credit_count": 15,
          "zero_count": 29,
          "mean_score_0_to_4": 2.311111111111111,
          "score_percent": 57.77777777777777,
          "score_distribution": {
            "0": 29,
            "1": 9,
            "2": 3,
            "3": 3,
            "4": 46
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 13,
          "incorrect_count": 47,
          "partial_credit_count": 44,
          "zero_count": 3,
          "mean_score_0_to_4": 2.033333333333333,
          "score_percent": 50.83333333333333,
          "score_distribution": {
            "0": 3,
            "1": 24,
            "2": 14,
            "3": 6,
            "4": 13
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 13,
          "incorrect_count": 47,
          "partial_credit_count": 44,
          "zero_count": 3,
          "mean_score_0_to_4": 2.033333333333333,
          "score_percent": 50.83333333333333,
          "score_distribution": {
            "0": 3,
            "1": 24,
            "2": 14,
            "3": 6,
            "4": 13
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 22,
        "incorrect_count": 28,
        "partial_credit_count": 19,
        "zero_count": 9,
        "mean_score_0_to_4": 2.38,
        "score_percent": 59.5,
        "score_distribution": {
          "0": 9,
          "1": 11,
          "2": 4,
          "3": 4,
          "4": 22
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 18,
        "incorrect_count": 32,
        "partial_credit_count": 20,
        "zero_count": 12,
        "mean_score_0_to_4": 2.1,
        "score_percent": 52.5,
        "score_distribution": {
          "0": 12,
          "1": 10,
          "2": 7,
          "3": 3,
          "4": 18
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 19,
        "incorrect_count": 31,
        "partial_credit_count": 20,
        "zero_count": 11,
        "mean_score_0_to_4": 2.12,
        "score_percent": 53.0,
        "score_distribution": {
          "0": 11,
          "1": 12,
          "2": 6,
          "3": 2,
          "4": 19
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 5120,
        "input_tokens": 110061,
        "output_tokens": 1341628,
        "total_tokens": 1451689
      },
      "known_totals": {
        "cached_input_tokens": 5120,
        "input_tokens": 110061,
        "output_tokens": 1341628,
        "total_tokens": 1451689
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 17,
          "incorrect_count": 13,
          "partial_credit_count": 5,
          "zero_count": 8,
          "mean_score_0_to_4": 2.6,
          "score_percent": 65.0,
          "score_distribution": {
            "0": 8,
            "1": 2,
            "2": 1,
            "3": 2,
            "4": 17
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 14,
          "incorrect_count": 16,
          "partial_credit_count": 6,
          "zero_count": 10,
          "mean_score_0_to_4": 2.1333333333333333,
          "score_percent": 53.333333333333336,
          "score_distribution": {
            "0": 10,
            "1": 4,
            "2": 2,
            "4": 14
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 15,
          "incorrect_count": 15,
          "partial_credit_count": 4,
          "zero_count": 11,
          "mean_score_0_to_4": 2.2,
          "score_percent": 55.00000000000001,
          "score_distribution": {
            "0": 11,
            "1": 3,
            "3": 1,
            "4": 15
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 5,
          "incorrect_count": 15,
          "partial_credit_count": 14,
          "zero_count": 1,
          "mean_score_0_to_4": 2.05,
          "score_percent": 51.24999999999999,
          "score_distribution": {
            "0": 1,
            "1": 9,
            "2": 3,
            "3": 2,
            "4": 5
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 4,
          "incorrect_count": 16,
          "partial_credit_count": 14,
          "zero_count": 2,
          "mean_score_0_to_4": 2.05,
          "score_percent": 51.24999999999999,
          "score_distribution": {
            "0": 2,
            "1": 6,
            "2": 5,
            "3": 3,
            "4": 4
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 4,
          "incorrect_count": 16,
          "partial_credit_count": 16,
          "zero_count": 0,
          "mean_score_0_to_4": 2.0,
          "score_percent": 50.0,
          "score_distribution": {
            "1": 9,
            "2": 6,
            "3": 1,
            "4": 4
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is\n\n\\[\nA_\\text{int} = g_m r_o\n\\]\n\nFor a long‑channel device in saturation:\n\n- \\(g_m = \\dfrac{2 I_D}{V_\\text{ov}}\\)\n- \\(r_o \\approx \\dfrac{1}{\\lambda I_D}\\), with \\(\\lambda \\propto \\dfrac{1}{L}\\)\n\nSo\n\n\\[\nA_\\text{int} = g_m r_o \\approx \\frac{2}{\\lambda V_\\text{ov}} \\propto L\n\\]\n\nNote that \\(W\\) cancels out; intrinsic gain depends mainly on \\(L\\), not \\(W\\), for a given overdrive and process.\n\nIf you double both \\(W\\) and \\(L\\) while keeping the same bias (same \\(V_\\text{ov}\\), same \\(V_{DS}\\)):\n\n- \\(W/L\\) stays the same → \\(I_D\\) and \\(g_m\\) stay (approximately) the same.\n- \\(L\\) doubles → \\(\\lambda\\) halves → \\(r_o\\) roughly doubles.\n\nTherefore:\n\n\\[\nA_\\text{int}' = g_m' r_o' \\approx g_m \\cdot (2 r_o) = 2 A_\\text{int}\n\\]\n\nSo the intrinsic gain approximately doubles.",
        "format": "markdown",
        "sha256": "61894b34fb6ce68bc4bf41776cbabccc46699831826761366e389b1b86c48163"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions keeps W/L, ID, and gm approximately unchanged while reducing channel-length modulation and doubling ro, so intrinsic gain approximately doubles under the stated bias assumptions.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3616,
        "total_tokens": 3642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3319,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3616,
        "total_tokens": 3642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3319,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is\n\n\\[\nA_i \\approx g_m r_o\n\\]\n\nFor a long‑channel MOSFET biased at the same \\(V_{OV}\\) and \\(V_{DS}\\):\n\n- \\(g_m \\propto \\dfrac{W}{L} V_{OV}\\)\n- \\(r_o \\propto \\dfrac{L^2}{W}\\) (because \\(r_o \\approx \\dfrac{1}{\\lambda I_D}\\), \\(I_D \\propto \\dfrac{W}{L}\\), and \\(\\lambda \\propto \\dfrac{1}{L}\\))\n\nSo:\n\n\\[\nA_i = g_m r_o \\propto \\frac{W}{L} \\cdot \\frac{L^2}{W} = L\n\\]\n\nIntrinsic gain is proportional to channel length and (under these assumptions) independent of width.\n\nIf you double both length and width: \\(L' = 2L\\), \\(W' = 2W\\),\n\n\\[\nA_i' \\propto L' = 2L \\Rightarrow A_i' = 2 A_i\n\\]\n\nSo the intrinsic gain approximately doubles.",
        "format": "markdown",
        "sha256": "7bd163aba3df7c2e568abc991f432ff568485e5ad222b545cf94f9edae15f4c1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions at fixed overdrive leaves gm and drain current approximately unchanged, while ro approximately doubles, so intrinsic gain doubles.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2072,
        "total_tokens": 2098,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2072,
        "total_tokens": 2098,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For a long-channel MOSFET biased at the same overdrive \\(V_{OV}\\) and current, intrinsic gain is\n\n\\[\nA_{\\text{int}} = g_m r_o = \\frac{g_m}{g_{ds}} \\approx \\frac{2}{\\lambda V_{OV}}\n\\]\n\nwhere \\(\\lambda \\propto \\frac{1}{L}\\) (channel-length modulation).\n\nSo:\n- \\(A_{\\text{int}} \\propto \\frac{1}{\\lambda} \\propto L\\)\n- It does **not** depend on \\(W\\) (for a given \\(V_{OV}\\)).\n\nIf you double both \\(L\\) and \\(W\\):\n- \\(W/L\\) stays the same → \\(g_m\\) stays approximately the same.\n- \\(L\\) doubles → \\(\\lambda\\) halves → \\(r_o\\) doubles.\n\nTherefore, the intrinsic gain \\(A_{\\text{int}}\\) approximately **doubles**.",
        "format": "markdown",
        "sha256": "fa0e75f3487f10edb28ff9d79ef82781c7c7d661d69100066ec1493bd5c49aba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling both width and length leaves W/L, gm, and current approximately unchanged while doubling ro, so intrinsic gain approximately doubles. The assumptions are stated clearly.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1315,
        "total_tokens": 1341,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1101,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1315,
        "total_tokens": 1341,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1101,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be correct; they’re talking about different conditions.\n\nFor a long‑channel MOSFET in saturation:\n\n\\[\nI_D = \\frac{1}{2}k\\,(V_{OV})^2,\\quad V_{OV} = V_{GS} - V_T\n\\]\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}} = k\\,V_{OV}\n\\]\n\nSo:\n\n- Written **directly in terms of \\(V_{OV}\\)**:\n  \\[\n  g_m = k\\,V_{OV}\n  \\]\n  As \\(V_{OV}\\) increases, \\(g_m\\) increases.  \n  → Student A is correct **if you treat \\(V_{OV}\\) as the knob and let \\(I_D\\) change accordingly** (fixed device, changing gate bias).\n\n- Written **for a fixed drain current \\(I_D\\)**:\n  \\[\n  g_m = \\frac{2I_D}{V_{OV}}\n  \\]\n  For a given \\(I_D\\), larger \\(V_{OV}\\) gives smaller \\(g_m\\).  \n  → Student B is correct **in the common analog‑design situation where \\(I_D\\) is fixed and you choose \\(V_{OV}\\)**.\n\nSo the resolution is:  \n- At fixed device parameters, varying bias: \\(g_m\\) increases with \\(V_{OV}\\).  \n- At fixed \\(I_D\\): \\(g_m\\) decreases with \\(V_{OV}\\).",
        "format": "markdown",
        "sha256": "8580872d5e1b28a6cfbf01f3a879620d1c9edfbe43491a89de56392da0a000a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed-size transistor, since gm = kVOV rises as overdrive and drain current increase. It also correctly qualifies Student B’s result for fixed ID.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2039,
        "total_tokens": 2077,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1716,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2039,
        "total_tokens": 2077,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1716,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be correct; they’re talking about different “things being held constant.”\n\nFor a long‑channel MOSFET in saturation (square‑law region):\n\n\\[\nI_D = \\tfrac{1}{2}\\mu C_{ox}\\frac{W}{L} (V_{OV})^2,\\quad V_{OV} = V_{GS} - V_{TH}\n\\]\n\nSmall‑signal transconductance:\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\mu C_{ox}\\frac{W}{L} V_{OV}\n\\]\n\nBut we can also write (substitute \\(I_D\\) into \\(g_m\\)):\n\n\\[\ng_m = \\frac{2I_D}{V_{OV}}\n\\]\n\nNow:\n\n1. **If device size and biasing are such that you *let the drain current change* as you change \\(V_{OV}\\)**  \n   (i.e., a fixed W/L transistor, you just raise \\(V_{GS}\\) and let \\(I_D\\) rise):\n   \\[\n   g_m = \\mu C_{ox}\\frac{W}{L} V_{OV} \\;\\Rightarrow\\; g_m \\propto V_{OV}\n   \\]\n   So **Student A is correct in this scenario**: higher overdrive → higher \\(g_m\\).\n\n2. **If you compare operating points at the *same drain current* \\(I_D\\)**  \n   (typical in analog design: power budget fixes \\(I_D\\); you change \\(V_{OV}\\) by changing W/L or device type):\n   \\[\n   g_m = \\frac{2I_D}{V_{OV}} \\;\\Rightarrow\\; g_m \\propto \\frac{1}{V_{OV}}\n   \\]\n   So **Student B is correct in this scenario**: for a fixed \\(I_D\\), higher overdrive → lower \\(g_m\\).\n\nSummary:\n\n- At **fixed transistor (W/L) and varying current**, \\(g_m\\) increases with \\(V_{OV}\\).  \n- At **fixed drain current**, \\(g_m\\) decreases with \\(V_{OV}\\).\n\nSo the correct answer is: **it depends what is being held constant; both students can be right under different assumptions.**",
        "format": "markdown",
        "sha256": "8f153dc1ddf25e1addaf6730ec79fa872ffd1bd3da758a4e76f78aa1080a3cba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that for a fixed W/L device, increasing overdrive raises gm because drain current also rises, and that gm decreases with overdrive only when drain current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1763,
        "total_tokens": 1801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1763,
        "total_tokens": 1801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be correct – they’re talking about two different situations.\n\nFor a long-channel MOSFET in saturation,\n\n\\[\nI_D = \\frac{1}{2} k' \\frac{W}{L} (V_{OV})^2,\\quad V_{OV} = V_{GS}-V_{TH}\n\\]\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}} = k' \\frac{W}{L} V_{OV}\n\\]\n\nSo:\n\n1. **If you keep device size and process fixed and just increase \\(V_{OV}\\)**  \n   Then \\(I_D\\) increases as \\(V_{OV}^2\\), and\n   \\[\n   g_m = k' \\frac{W}{L} V_{OV} \\propto V_{OV}\n   \\]\n   So **\\(g_m\\) increases with \\(V_{OV}\\)**.  \n   → **Student A is correct in this scenario.**\n\n2. **If you keep the drain current \\(I_D\\) fixed (typical in analog design)**  \n   Use the alternate form:\n   \\[\n   g_m = \\frac{2 I_D}{V_{OV}}\n   \\]\n   With constant \\(I_D\\), increasing \\(V_{OV}\\) makes\n   \\[\n   g_m \\propto \\frac{1}{V_{OV}}\n   \\]\n   So **\\(g_m\\) decreases as \\(V_{OV}\\) increases**.  \n   → **Student B is correct in this scenario.**\n\nSo the apparent contradiction comes from what is being held constant:\n\n- Fixed device and varying bias: \\(g_m\\) increases with \\(V_{OV}\\).\n- Fixed current and choosing \\(V_{OV}\\) by design: \\(g_m\\) decreases with \\(V_{OV}\\).",
        "format": "markdown",
        "sha256": "5f0ae2239913ef642b674c3ac09656b63a13b5d69ea5cd05aa53fe8478637513"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device: increasing overdrive increases current and transconductance. It also correctly explains that transconductance decreases with overdrive when drain current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1724,
        "total_tokens": 1762,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1334,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1724,
        "total_tokens": 1762,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1334,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, in small-signal terms the model is structurally identical.\n\n- Both NMOS and PMOS use:\n  - A controlled current source of value \\( g_m v_{gs} \\) between drain and source\n  - An output resistance \\( r_o \\) between drain and source\n  - (Optionally) a body-effect source \\( g_{mb} v_{bs} \\), and the same capacitances \\(C_{gs}, C_{gd}, \\dots\\)\n\n- The *form* of the small-signal equations is the same:\n  \\[\n  i_d = g_m v_{gs} + g_{mb} v_{bs} + \\frac{v_{ds}}{r_o}\n  \\]\n  applies for both NMOS and PMOS, provided you define the voltages with respect to the source terminal in the usual way.\n\n- What differs is:\n  - The DC biasing (PMOS operates with gate and drain at lower potential than source)\n  - The sign of the threshold voltage (negative for PMOS)\n  - The direction of DC current flow in the actual circuit diagram\n\nOnce the device is biased and you linearize around the operating point, the incremental (small-signal) model is the same; only the reference directions and DC operating conditions differ.",
        "format": "markdown",
        "sha256": "64bfea27c14e20c834b2792d5594f9239d6103c43b57f06d7691f577d67adfe0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model and notes that reference directions and operating conditions differ.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 644,
        "total_tokens": 670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 371,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 644,
        "total_tokens": 670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 371,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Structurally, yes; literally, no.\n\n- Both NMOS and PMOS small-signal models use the *same set of elements*:\n  - A transconductance source: \\( g_m v_{gs} \\) (or \\( g_m v_{sg} \\) for PMOS)\n  - Body-effect source: \\( g_{mb} v_{bs} \\) (or \\( g_{mb} v_{sb} \\) for PMOS)\n  - Output resistance: \\( r_o \\) between drain and source\n  - Same intrinsic capacitances (Cgs, Cgd, etc.) arranged similarly\n\n- The *differences* are purely in sign conventions and terminal labeling:\n  - For NMOS: current usually defined flowing from drain to source, controlled by \\(v_{gs}\\).\n  - For PMOS: current typically flows from source to drain, controlled by \\(v_{sg}\\).\n  - If you write the PMOS equations in terms of the usual SPICE current directions, \\(g_m\\) comes out negative; in hand analysis we normally flip the symbol and define \\(g_m>0\\) and just use \\(v_{sg}\\).\n\nSo the small-signal *topology* is the same; after relabeling voltages (e.g., \\(v_{gs} \\leftrightarrow v_{sg}\\)) and reversing current directions, the PMOS and NMOS small-signal models are equivalent. The only differences are sign conventions, not in the actual structure of the model.",
        "format": "markdown",
        "sha256": "85c1df689b50142babf66d751c29db18727d139fb3e3c1704139e6d895e57fc2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS model has the same structure as the NMOS model, with equivalent behavior after accounting for reversed voltage and current sign conventions.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 856,
        "total_tokens": 882,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 535,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 856,
        "total_tokens": 882,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 535,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "They use the **same small-signal topology**, but the **sign conventions and reference directions differ**.\n\n- For an NMOS (in saturation), the incremental drain current is\n  \\[\n  i_d = g_m v_{gs} + g_{mb} v_{bs} + \\frac{v_{ds}}{r_o}\n  \\]\n  with current defined entering the drain, and \\(v_{gs} = v_g - v_s\\).\n\n- For a PMOS (in saturation), if you keep the usual PMOS biasing (source at higher potential) and define current entering the source, the equations look formally identical:\n  \\[\n  i_s = g_m v_{sg} + g_{mb} v_{sb} + \\frac{v_{sd}}{r_o}\n  \\]\n  i.e., same controlled sources and resistances, just with voltages measured as source–gate and source–bulk (and current flowing from source to drain instead of drain to source).\n\nIf you insist on using the **same terminal labels and current directions** as for an NMOS (current entering the drain, \\(v_{gs}\\), etc.), then the PMOS small-signal expressions pick up minus signs. But by redefining the reference directions in the “natural” way for PMOS (source at the top, current entering the source, use \\(v_{sg}\\)), the **small-signal model is structurally identical**: same elements (gm, gmb, ro), connected in the same way.",
        "format": "markdown",
        "sha256": "2f1063f7f541ac8480623de79aa7eb1fdf8dd698661729c442c69f4b2b2809c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS has the same small-signal model structure as the NMOS when polarities and reference directions are chosen consistently; the sign-convention explanation is appropriate.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 910,
        "total_tokens": 936,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 589,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 910,
        "total_tokens": 936,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 589,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this circuit the MOSFET is **diode‑connected**:  \n\\(V_{GS}=V_{DS}=V_X\\) and the source/body are at ground.\n\nIgnoring subthreshold and channel‑length modulation:\n\n- For \\(V_X < V_{TN}\\):  \n  \\(V_{GS}<V_{TN}\\) → transistor off → \\(I_X \\approx 0\\).\n\n- For \\(V_X \\ge V_{TN}\\):  \n  device is in saturation for all \\(V_X\\) (since \\(V_{DS}=V_{GS}\\)), so  \n\n\\[\nI_X = I_D = \\frac{1}{2}k_n\\frac{W}{L}(V_X - V_{TN})^{2}, \\qquad V_X \\ge V_{TN}\n\\]\n\nwhere \\(k_n=\\mu_n C_{ox}\\).\n\nSo the \\(I_X\\!-\\!V_X\\) plot is:\n\n- A horizontal line at \\(I_X=0\\) from \\(-\\infty\\) up to \\(V_X=V_{TN}\\).\n- For \\(V_X>V_{TN}\\), a rising quadratic curve starting at the origin of that point \\((V_{TN},0)\\).",
        "format": "markdown",
        "sha256": "da908c6645955ce5dfd17a901f424b49c98ad929860433900df82f02967a1c14"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current up to threshold, and the quadratic saturation-current rise above threshold. The negative-\u001b[0mVX range is secondary and does not affect the required result.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 927,
        "output_tokens": 6114,
        "total_tokens": 7041,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5850,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 927,
        "output_tokens": 6114,
        "total_tokens": 7041,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5850,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this circuit the MOSFET \\(M_1\\) is **diode‑connected** (gate and drain tied together to node \\(x\\)); its source and bulk are at ground.\n\nSo:\n- \\(V_X = V_G = V_D = V_{GS} = V_{DS}\\)\n- \\(I_X = I_D\\) (current from node \\(x\\) into the transistor).\n\nBehavior:\n\n1. **For \\(V_X < 0\\)**  \n   \\(V_{GS}<0\\) → NMOS is off. (Ignoring the body diode, \\(I_X \\approx 0\\).)\n\n2. **For \\(0 \\le V_X < V_{tn}\\)**  \n   \\(V_{GS}=V_X < V_{tn}\\) → device in cutoff → \\(I_X \\approx 0\\).\n\n3. **For \\(V_X \\ge V_{tn}\\)**  \n   \\(V_{GS}=V_{DS}=V_X \\ge V_{tn}\\).  \n   A diode‑connected NMOS is always in saturation when it conducts, so\n\n\\[\nI_X = I_D\n   = \\frac{1}{2} k_n \\frac{W}{L}(V_X - V_{tn})^2 \\quad (V_X \\ge V_{tn})\n\\]\n\n(ignoring channel‑length modulation).\n\n**Sketch description**\n\n- Horizontal axis: \\(V_X\\), vertical axis: \\(I_X\\).\n- From large negative \\(V_X\\) up to \\(V_X = V_{tn}\\): \\(I_X \\approx 0\\) (line on the axis).\n- For \\(V_X > V_{tn}\\): \\(I_X\\) rises as a *parabola* starting at zero at \\(V_X = V_{tn}\\), concave upward.",
        "format": "markdown",
        "sha256": "43c326e180c9ce86ef0770822b972b5fff50ccc989a5120a0d6bc07aa1791781"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold, and a quadratic rise above threshold. The negative-\u001b[?25lVX discussion is secondary and does not affect the required result.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 927,
        "output_tokens": 3907,
        "total_tokens": 4834,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3521,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 927,
        "output_tokens": 3907,
        "total_tokens": 4834,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3521,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "With M1’s gate and drain shorted,  \n\n\\[\nV_{GS}=V_{DS}=V_X\n\\]\n\nand the NMOS is always in saturation whenever it is on.\n\nIgnoring subthreshold and body‑diode current:\n\n\\[\nI_X(V_X) =\n\\begin{cases}\n0, & V_X < V_{TN} \\\\[4pt]\n\\dfrac{1}{2}k_n\\left(V_X - V_{TN}\\right)^2, & V_X \\ge V_{TN}\n\\end{cases}\n\\]\n\nwhere \\(k_n = \\mu_n C_{\\text{ox}}(W/L)\\).\n\n**Sketch:**\n\n- Horizontal axis: \\(V_X\\); vertical axis: \\(I_X\\).\n- From \\(V_X=-\\infty\\) up to \\(V_X = V_{TN}\\): curve lies on the \\(I_X=0\\) axis (no current).\n- At \\(V_X = V_{TN}\\) the current just begins to rise.\n- For \\(V_X > V_{TN}\\), \\(I_X\\) increases with a **parabolic** (quadratic) shape, always in the first quadrant.\n\n(If you include body‑diode effects, there would also be a forward‑biased diode branch for sufficiently negative \\(V_X\\), but the basic MOS “diode‑connected” characteristic is as above.)",
        "format": "markdown",
        "sha256": "84bbbd2f305d04c51a7185a508ed2b70ee2c324e165c7a1f0df97fa9fa42bc66"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its saturation operation when on, and the quadratic current rise above threshold. The idealized zero-current region and note about negative-voltage body-diode conduction are consistent with the golden solution.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 927,
        "output_tokens": 5115,
        "total_tokens": 6042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4820,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 927,
        "output_tokens": 5115,
        "total_tokens": 6042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4820,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the NMOS \\(M_1\\):\n\n- Source is at 0 V  \n- Drain is fixed at \\(V_D = 1\\text{ V}\\)  \n- Gate is at \\(V_G = V_X\\)  \n\nSo  \n\\[\nV_{GS}=V_X ,\\qquad V_{DS}=1\\text{ V (constant)}\n\\]\n\nAssuming a long‑channel device and neglecting channel‑length modulation:\n\n---\n\n### Regions as \\(V_X\\) increases\n\n1. **Cutoff** (\\(V_X < V_T\\))  \n   \\[\n   I_X \\approx 0\n   \\]\n\n2. **Saturation** (\\(V_T \\le V_X \\le V_T + 1\\))  \n   Condition: \\(V_{DS} \\ge V_{GS}-V_T \\Rightarrow 1 \\ge V_X - V_T\\)  \n   \\[\n   I_X = \\frac{1}{2}k_n (V_X - V_T)^2\n   \\]\n   (parabolic increase starting at \\(V_X = V_T\\)).\n\n3. **Triode (linear) region** (\\(V_X \\ge V_T + 1\\))  \n   Condition: \\(V_{DS} < V_{GS}-V_T \\Rightarrow 1 < V_X - V_T\\)  \n   \\[\n   I_X = k_n\\!\\left[(V_X - V_T) \\cdot 1 - \\frac{1^2}{2}\\right]\n       = k_n (V_X - V_T - \\tfrac{1}{2})\n   \\]\n   (approximately linear in \\(V_X\\) with slope \\(k_n\\)).\n\n---\n\n### Sketch description\n\n- Horizontal axis: \\(V_X\\)\n- Vertical axis: \\(I_X\\)\n- \\(I_X = 0\\) for \\(V_X < V_T\\).  \n- From \\(V_T\\) to \\(V_T+1\\), \\(I_X\\) rises **quadratically** (concave up).  \n- For \\(V_X > V_T+1\\), \\(I_X\\) continues to rise but **linearly** with \\(V_X\\).  \n- The transition between the parabolic and linear parts occurs at \\(V_X = V_T + 1\\text{ V}\\).",
        "format": "markdown",
        "sha256": "2612da4792d3ad7b7d0ba7a861e77310b2f723737bbb6234b3097e1ca9042c38"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, quadratic saturation rise from VTH to VTH+1 V, and roughly linear triode-region rise beyond that, matching the required sketch.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 2929,
        "total_tokens": 3857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 2929,
        "total_tokens": 3857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this circuit M1 is an nMOS with source at ground.  \nHence  \n\n- \\(V_{GS}=V_X\\)  \n- \\(V_{DS}=1\\text{ V}\\) (fixed by the 1‑V source)  \n- \\(I_X = I_D\\) (current through the transistor).\n\nUsing the long‑channel MOS equations:\n\n- **Cutoff** (\\(V_X < V_T\\))  \n  \\[\n  I_X \\approx 0\n  \\]\n\n- **Saturation** (\\(V_T \\le V_X \\le V_T+1\\)) since \\(V_{DS} \\ge V_{GS}-V_T\\):  \n  \\[\n  I_X = \\frac{k_n}{2}(V_X - V_T)^2\n  \\]\n\n- **Triode (linear) region** (\\(V_X \\ge V_T+1\\)) since \\(V_{DS} < V_{GS}-V_T\\):  \n  \\[\n  I_X = k_n\\!\\left[(V_X - V_T) V_{DS} - \\frac{V_{DS}^2}{2}\\right]\n      = k_n\\bigl(V_X - V_T - \\tfrac{1}{2}\\bigr)\n  \\]\n\nSo the sketch of \\(I_X\\) vs. \\(V_X\\) is:\n\n- Zero for \\(V_X < V_T\\),\n- A rising **parabola** for \\(V_T \\le V_X \\le V_T+1\\),\n- Continuing as a **straight line** with slope \\(k_n\\) for \\(V_X > V_T+1\\),\n\nwith both the current and its slope continuous at \\(V_X = V_T + 1\\).",
        "format": "markdown",
        "sha256": "42c0d618bb234538e2d79c0f1f63c77b9956e9c58eb37e9f1cd86f7de563f3eb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions, with a quadratic rise up to V_T+1 V and a continuous, roughly linear rise beyond it.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 6044,
        "total_tokens": 6972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5670,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 6044,
        "total_tokens": 6972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5670,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In this circuit M1 is an n‑MOS with\n\n- \\(V_D = 1\\text{ V}\\) (fixed by the source)  \n- \\(V_S = 0\\)  \n- \\(V_G = V_X\\)\n\nSo \\(V_{DS}=1\\text{ V}\\) (constant) and \\(V_{GS}=V_X\\).\n\nIgnoring channel‑length modulation, the drain current is\n\n\\[\nI_X = I_D =\n\\begin{cases}\n0, & V_X \\le V_{TN} \\quad\\text{(cutoff)} \\\\[4pt]\n\\dfrac{1}{2}k_n\\left(V_X-V_{TN}\\right)^2, &\nV_{TN} < V_X \\le V_{TN}+1 \\quad\\text{(saturation)}\\\\[8pt]\nk_n\\left[\\,(V_X-V_{TN})\\cdot1 - \\dfrac{1^2}{2}\\right]\n= k_n\\big(V_X-V_{TN}-\\tfrac12\\big), &\nV_X \\ge V_{TN}+1 \\quad\\text{(triode/linear)}\n\\end{cases}\n\\]\n\n(\\(k_n = \\mu_n C_{ox}(W/L)\\)).\n\n**Sketch (qualitative):**\n\n- For \\(V_X < V_{TN}\\): \\(I_X \\approx 0\\).  \n- From \\(V_{TN}\\) to \\(V_{TN}+1\\): \\(I_X\\) rises **quadratically** with \\(V_X\\) (parabola).  \n- For \\(V_X > V_{TN}+1\\): \\(I_X\\) increases **linearly** with \\(V_X\\).\n\nMark on the \\(V_X\\) axis the points \\(V_{TN}\\) (start of conduction) and \\(V_{TN}+1\\) (boundary between saturation and triode).",
        "format": "markdown",
        "sha256": "8d829c0a67bc1484bff180b4cf63e9cd8e4cf218f6e808bdc30af79b5caa28a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions, with the quadratic rise up to VTN + 1 V and roughly linear rise beyond.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 4324,
        "total_tokens": 5252,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3915,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 4324,
        "total_tokens": 5252,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3915,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No.  \n\nIn the circuit shown the MOSFET’s gate, source and body are all at ground, so  \n\\(V_{GS}=0\\). For a normal enhancement‑mode MOSFET this means the device is in\ncutoff and its drain current is essentially zero (only leakage flows).  \nSince there is no finite, bias‑set current that is maintained independent of\nthe drain voltage, it cannot function as a useful current source (other than\nthe trivial case of \\(I_x \\approx 0\\)).",
        "format": "markdown",
        "sha256": "5a4361c9a349769462a17d1dcc2429a434241d0b81ce065cd15044284e4bd3f4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misreads the connections and concludes the device is off because its gate and source are grounded. In fact, M1 is a diode-connected PMOS that presents low impedance, so the reasoning misses the essential mechanism.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 369,
        "output_tokens": 4667,
        "total_tokens": 5036,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 369,
        "output_tokens": 4667,
        "total_tokens": 5036,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes – in this connection the device can act as a (two‑terminal) current source.\n\nThe symbol is a JFET whose gate and source are shorted to ground, so  \n\\(V_{GS}=0\\). For an n‑channel JFET the saturation‑region current is\n\n\\[\nI_D = I_{DSS}\\left(1-\\frac{V_{GS}}{V_P}\\right)^2 , \\qquad \nV_{DS} \\ge V_{GS}-V_P\n\\]\n\nWith \\(V_{GS}=0\\),\n\n\\[\nI_D \\approx I_{DSS}\n\\]\n\nwhich is essentially independent of \\(V_{DS}\\) over a wide range (until breakdown). Thus, seen from the top terminal, the device draws an almost constant current ≈\\(I_{DSS}\\) to ground, i.e., it behaves as a current sink / current source.",
        "format": "markdown",
        "sha256": "79ac337717f48356c3141113afa660acca8c375244b70105514434cc827f0cd3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as a JFET and concludes it acts as a current source. It is a diode-connected PMOS with low small-signal impedance (about 1/gm), so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 369,
        "output_tokens": 7374,
        "total_tokens": 7743,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7179,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 369,
        "output_tokens": 7374,
        "total_tokens": 7743,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7179,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No.  \n\nIn the circuit the MOSFET \\(M_1\\) has its gate and source both at ground, so\n\n\\[\nV_{GS}=0\n\\]\n\nFor a normal enhancement‑mode MOSFET, conduction requires \\(V_{GS} > V_T\\). With \\(V_{GS}=0\\) the device is in cutoff and the drain current is essentially zero (except for leakage or body‑diode current when the drain voltage becomes large).  \n\nSince the current is not a controlled, approximately constant value over a range of voltages, this configuration cannot be used as a current source.",
        "format": "markdown",
        "sha256": "ace55dc9ab8e18448acfd391f6d5670a98b88c38f20303d83e6fa9c4a91b885d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misreads M1’s terminals and treats it as a device with its gate and source grounded, concluding it is off. The actual device is a diode-connected PMOS that presents low impedance, which is the reason it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 369,
        "output_tokens": 6689,
        "total_tokens": 7058,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6557,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 369,
        "output_tokens": 6689,
        "total_tokens": 7058,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6557,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat \\(M_1\\) as an n‑channel MOSFET.  \nThe upper resistor \\(R_S\\) biases the drain from \\(V_{DD}\\); the lower\nresistor \\(R_D\\) is connected to the source, which is also the output node.\n\nSo, from top to bottom the path is\n\n\\[\nV_{DD} \\rightarrow R_S \\rightarrow \\text{drain of }M_1 \\rightarrow\n\\text{source of }M_1 (V_{out}) \\rightarrow R_D \\rightarrow 0.\n\\]\n\nGate is driven by \\(V_{in}\\).\n\n---\n\n### 1. DC (large‑signal) behaviour\n\nAssume operation in saturation and ignore channel‑length modulation first.\n\nAt the output node\n\n\\[\nI_D = \\frac{V_{out}}{R_D}\n\\]\n\nand, for saturation of an nMOS,\n\n\\[\nI_D=\\frac{1}{2}k_n\\,(V_{GS}-V_t)^2\n        =\\frac{1}{2}k_n\\,(V_{in}-V_{out}-V_t)^2 .\n\\]\n\nEquating:\n\n\\[\n\\boxed{\\frac{V_{out}}{R_D}=\n\\frac{1}{2}k_n\\,(V_{in}-V_{out}-V_t)^2}\n\\]\n\nThis implicit relation gives \\(V_{out}\\) versus \\(V_{in}\\) while the\ntransistor is in saturation.\n\nThe drain voltage is\n\n\\[\nV_D = V_{DD} - I_D R_S\n    = V_{DD} - \\frac{R_S}{R_D}V_{out}.\n\\]\n\nSaturation condition:\n\n\\[\nV_{DS}=V_D - V_{out}\n      =V_{DD} - V_{out}\\!\\left(1+\\frac{R_S}{R_D}\\right)\n      \\ge V_{GS}-V_t = V_{in}-V_{out}-V_t.\n\\]\n\nIf \\(V_{in}<V_t\\), then \\(M_1\\) is off and\n\\(I_D\\approx0\\Rightarrow V_{out}\\approx0\\).\n\nWhen \\(V_{in}\\) is high enough, the device eventually leaves saturation and\nenters the triode region; then\n\n\\[\nI_D \\approx k_n\\!\\left[(V_{GS}-V_t)V_{DS}-\\tfrac{1}{2}V_{DS}^2\\right]\n\\]\n\nwith the same relations between \\(V_{out}\\), \\(V_D\\), \\(V_{GS}\\), \\(V_{DS}\\).\n\nQualitatively, for normal bias the circuit behaves as a **source follower**:\nfor the active region\n\n\\[\nV_{out} \\approx V_{in}-V_{GS(on)}\n\\]\n\ni.e. it copies the input minus roughly a MOS \\(V_{GS}\\).\n\n---\n\n### 2. Small‑signal analysis\n\nBias the circuit at some operating point where \\(I_D\\), \\(V_{GS}\\), and\n\\(V_{DS}\\) are known.  \nLet the small‑signal parameters be \\(g_m\\) and \\(r_o\\) (so \\(g_{ds}=1/r_o\\)).\n\nAC: \\(V_{DD}\\) is ground, so \\(R_S\\) is from the drain to AC ground and\n\\(R_D\\) from the source/output to ground.\n\nWriting KCL at the drain and source nodes and solving for\n\\(A_v = v_{out}/v_{in} = v_s/v_g\\) gives\n\n\\[\n\\boxed{A_v\n= \\frac{g_m}{g_m + g_{ds}\\!\\left(1+\\frac{R_S}{R_D}\\right)\n                 + \\frac{1}{R_D}}}\n\\]\n\nIf channel‑length modulation is neglected \\((r_o\\to\\infty,\\; g_{ds}\\to 0)\\),\n\n\\[\n\\boxed{A_v \\approx \\frac{g_m R_D}{1+g_m R_D}}\n\\]\n\nwhich is positive and less than 1: the stage is a **voltage buffer** with\ngain near unity when \\(g_m R_D\\gg1\\).\n\n---\n\n### 3. Input and output resistances\n\n- Input resistance: gate is insulated ⇒\n  \\[\n  \\boxed{R_{in} \\approx \\infty}\n  \\]\n  (ignoring gate leakage and any bias network not shown).\n\n- Output resistance (with \\(v_{in}\\) AC‑grounded) is, to first order and with\n\\(r_o\\to\\infty\\),\n\n  \\[\n  \\boxed{R_{out} \\approx R_D \\parallel \\frac{1}{g_m}}\n  \\]\n\n  (if \\(r_o\\) is included, it appears in parallel with \\(R_S\\) and modifies\n\\(R_{out}\\) slightly).\n\n---\n\nSo the circuit is a **source‑follower (common‑drain) MOS amplifier**:\n\n- High input resistance.\n- Low output resistance.\n- Voltage gain slightly less than 1.\n- It shifts the input voltage down by approximately \\(V_{GS}\\) while providing\nbuffering.",
        "format": "markdown",
        "sha256": "b8724c4d7eb5a3177cb54a24745f503509613ab861d4485ff5a538c054763684"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer reverses the device connections and misidentifies the circuit as an NMOS source follower. The actual circuit is a PMOS common-source stage with source degeneration and an inverting gain, so the analysis does not apply.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 924,
        "output_tokens": 15555,
        "total_tokens": 16479,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14451,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 924,
        "output_tokens": 15555,
        "total_tokens": 16479,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14451,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Take \\(M_1\\) as an n‑MOSFET with the body tied to the lower terminal.  \nThus the lower terminal (where \\(V_{out}\\) is taken) is the **source** and the\nupper terminal is the **drain**.\n\nSo\n\n- Source node: \\(V_S = V_{out}\\) , connected to \\(R_D\\) to ground  \n- Drain node: \\(V_D\\), connected to \\(R_S\\) to \\(V_{DD}\\)  \n- Gate node: \\(V_G = V_{in}\\)\n\n---\n\n### DC (large‑signal) relations\n\nLet the drain current be \\(I_D\\).\n\n\\[\nV_S = V_{out} = I_D R_D\n\\]\n\n\\[\nV_D = V_{DD} - I_D R_S\n\\]\n\n\\[\nV_{GS} = V_G - V_S = V_{in} - I_D R_D\n\\]\n\n\\[\nV_{DS} = V_D - V_S = V_{DD} - I_D(R_S+R_D)\n\\]\n\n1. **Cutoff**\n\nIf \\(V_{GS} \\le V_{TH}\\) then \\(I_D \\approx 0\\) and \\(V_{out} \\approx 0\\).\n\n2. **Assuming saturation** (and neglecting channel‑length modulation, \\(\\lambda=0\\))\n\n\\[\nI_D = \\frac{1}{2}k_n (V_{GS}-V_{TH})^2\n     = \\frac{1}{2}k_n\\big(V_{in}-I_D R_D-V_{TH}\\big)^2\n\\]\n\nThis implicit equation in \\(I_D\\) (and hence \\(V_{out}=I_D R_D\\)) gives the\nDC transfer once a particular \\(V_{in}\\) is specified.  \n\nThe saturation condition must also hold:\n\n\\[\nV_{DS} \\ge V_{GS}-V_{TH}\n\\quad\\Rightarrow\\quad\nV_{DD}-I_D(R_S+R_D)\\ge V_{in}-I_D R_D - V_{TH}\n\\]\n\nIf this inequality fails while \\(V_{GS}>V_{TH}\\), then the device is in the\ntriode region and the triode equation must be used.\n\n---\n\n### Small‑signal (AC) analysis (M1 in saturation, \\(\\lambda\\simeq0\\))\n\nFor AC, \\(V_{DD}\\) is ground, so \\(R_S\\) simply connects the drain to AC\nground.  With \\(\\lambda=0\\), the drain‑current depends only on \\(v_{gs}\\), so\nthe value of \\(R_S\\) does not affect the small‑signal gain; it only sets the\nDC bias and headroom.\n\nLet lower‑case denote small‑signal quantities (\\(v_g, v_s, v_{out}\\)).\n\n\\[\nv_{gs} = v_g - v_s\n\\]\n\nKCL at the source node:\n\n\\[\n\\frac{v_s}{R_D} - g_m v_{gs} = 0\n\\]\n\nSubstitute \\(v_{gs} = v_g - v_s\\):\n\n\\[\n\\frac{v_s}{R_D} - g_m(v_g - v_s) = 0\n\\]\n\n\\[\nv_s(1 + g_m R_D) = g_m R_D\\, v_g\n\\]\n\n\\[\n\\boxed{\\displaystyle\nA_v \\equiv \\frac{v_{out}}{v_{in}} = \\frac{v_s}{v_g}\n      = \\frac{g_m R_D}{1 + g_m R_D}\n}\n\\]\n\nThus the circuit is a **source follower (common‑drain amplifier)** with gain\nslightly less than unity.  \nFor \\(g_m R_D \\gg 1\\): \\(A_v \\approx 1\\) (non‑inverting buffer).\n\n---\n\n### Input and output resistance\n\n- **Input resistance**\n\n  MOS gate current ≈ 0 ⇒\n\n  \\[\n  R_{in} \\approx \\infty\n  \\]\n\n- **Output resistance**\n\n  Set \\(v_g = 0\\) (AC ground at input), apply a small test voltage \\(v_x\\) at\n  the output node.\n\n  Then \\(v_{gs} = -v_x\\), and KCL at the source node gives\n\n  \\[\n  i_x = \\frac{v_x}{R_D} + g_m v_x\n  \\]\n\n  \\[\n  \\boxed{\\displaystyle\n  R_{out} = \\frac{v_x}{i_x} = \\frac{1}{g_m + 1/R_D}\n           = \\left(\\frac{1}{g_m} \\parallel R_D\\right)\n  }\n  \\]\n\nSo the circuit behaves as a source‑follower stage: very high input resistance,\nlow output resistance, and a voltage gain close to +1. The resistor \\(R_S\\)\nsets the DC drain voltage and current (subject to the saturation condition)\nbut does not affect the AC gain when channel‑length modulation is neglected.",
        "format": "markdown",
        "sha256": "8255faaa96731049480acb39e180527542add8b6e2a4736a2ecbb1f4723b5efd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It reverses the device connections and analyzes an NMOS source follower, rather than the PMOS common-source stage with source degeneration. Its positive gain is for the wrong topology, so the central analysis is incorrect.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 924,
        "output_tokens": 12712,
        "total_tokens": 13636,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11630,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 924,
        "output_tokens": 12712,
        "total_tokens": 13636,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11630,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "- \\(M_1\\) is a p‑MOSFET used as a **common‑source amplifier with source degeneration**.  \n  Source is at the top, connected to \\(V_{DD}\\) through \\(R_S\\); drain is at the bottom, connected to ground through \\(R_D\\); input is at the gate, output at the drain.\n\n---\n\n### 1. DC relations\n\nLet the quiescent (DC) values be:\n\n- Source: \\(V_S\\)\n- Drain (output): \\(V_D = V_{out}\\)\n- Gate (input bias): \\(V_G = V_{in}\\)\n- Drain current (from source to drain): \\(I_D\\)\n\nResistors:\n\n\\[\nV_S = V_{DD} - I_D R_S,\n\\qquad\nV_D = I_D R_D\n\\]\n\nFor the pMOS (taking magnitude of the threshold as \\(|V_{TP}|\\)):\n\n\\[\nV_{SG} = V_S - V_G,\n\\]\n\nRegion conditions:\n\n- **Cutoff:** \\(V_{SG} \\le |V_{TP}|\\Rightarrow I_D \\approx 0,\\ V_S \\approx V_{DD},\\ V_D \\approx 0\\).\n- **Triode:** \\(V_{SG}>|V_{TP}|\\) and \\(V_{SD}<V_{SG}-|V_{TP}|\\).\n- **Saturation:** \\(V_{SG}>|V_{TP}|\\) and \\(V_{SD}\\ge V_{SG}-|V_{TP}|\\).\n\nIn saturation,\n\n\\[\nI_D=\\frac{1}{2}k_p (V_{SG}-|V_{TP}|)^2\n   =\\frac{1}{2}k_p\\left(V_{DD}-I_D R_S - V_G - |V_{TP}|\\right)^2\n\\]\n\nwhich, together with \\(V_D=I_D R_D\\), determines the operating point.\n\n---\n\n### 2. Small‑signal (midband) analysis\n\nAssume \\(M_1\\) is biased in saturation and use the small‑signal model with transconductance \\(g_m\\) and ignore \\(r_o\\) and body effect.\n\nFor small‑signal quantities \\(v_g,\\ v_s,\\ v_d\\) (about the bias point):\n\n- Resistors: \\(R_S\\) and \\(R_D\\) both go from their nodes to AC ground.\n- pMOS small‑signal current from source to drain:\n  \\[\n  i_{sd} = g_m v_{sg} = g_m (v_s - v_g)\n  \\]\n\n**Node S (source):**\n\n\\[\n\\frac{v_s}{R_S} + g_m(v_s - v_g) = 0\n\\quad\\Rightarrow\\quad\nv_s = \\frac{g_m}{g_m + 1/R_S}\\, v_g\n\\]\n\n**Node D (drain / output):**\n\nCurrent leaving node D:\n\n\\[\n\\frac{v_d}{R_D} - g_m(v_s - v_g) = 0\n\\quad\\Rightarrow\\quad\nv_d = g_m R_D (v_s - v_g)\n\\]\n\nSubstitute \\(v_s\\):\n\n\\[\nv_s - v_g = -\\frac{v_g}{1 + g_m R_S}\n\\]\n\nHence the **voltage gain**\n\n\\[\nA_v = \\frac{v_{out}}{v_{in}}\n     = \\frac{v_d}{v_g}\n     = -\\,\\frac{g_m R_D}{1 + g_m R_S}\n\\]\n\n- With \\(R_S=0\\): \\(A_v \\approx -g_m R_D\\) (ordinary common‑source stage).\n- With \\(g_m R_S \\gg 1\\): \\(A_v \\approx -\\dfrac{R_D}{R_S}\\) (gain set mainly by resistors; strong source‑degeneration feedback).\n\n**Input resistance**\n\nGate current ≈ 0 ⇒\n\n\\[\nR_{in} \\approx \\infty\n\\]\n\n(ignoring gate leakage and capacitances).\n\n**Output resistance**\n\nWith \\(v_{in}=0\\), the small‑signal source voltage becomes 0 from the source‑node KCL, so the transistor contributes no incremental current; therefore\n\n\\[\nR_{out} \\approx R_D\n\\]\n\nif \\(r_o\\) is neglected (otherwise \\(R_{out} \\approx R_D \\parallel r_o\\)).\n\n---\n\nSummary: the circuit is a pMOS common‑source amplifier with source degeneration \\(R_S\\), resistive load \\(R_D\\), high input resistance, output resistance ≈ \\(R_D\\), and small‑signal gain \\(A_v = -g_m R_D/(1 + g_m R_S)\\).",
        "format": "markdown",
        "sha256": "48bd31c9ae1cd27a51364836d7ac9473c98b1297917af08d813ebafb5eb72c07"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and derives the inverting gain \u0002-g_m R_D/(1+g_mR_S)\u0002. The optional output-resistance detail does not affect the essential answer.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 924,
        "output_tokens": 9874,
        "total_tokens": 10798,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8852,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 924,
        "output_tokens": 9874,
        "total_tokens": 10798,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8852,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower** (common–drain stage) with a source\nresistor \\(R_S\\).  \nDrain is tied to \\(V_{DD}\\), gate is driven by \\(V_{in}\\), and the output is the\nsource node \\(V_{out}\\).\n\n---\n\n### 1. DC (large‑signal) behavior\n\nAssume body tied to source (no body effect) and ignore channel‑length\nmodulation.\n\n1. **Cutoff**\n\n\\[\nV_{GS}=V_{in}-V_{out} < V_{TH} \\quad\\Rightarrow\\quad I_D \\approx 0\n\\]\n\nThen \\(V_{out}=0\\) (no current through \\(R_S\\)).\n\n2. **Conduction (saturation, typical operating region)**  \n\nWith \\(V_{GS}>V_{TH}\\) and \\(V_{DS}\\ge V_{GS}-V_{TH}\\),\n\n\\[\nI_D=\\frac{1}{2}k_n(V_{GS}-V_{TH})^2\n\\]\n\nbut \\(I_D = \\dfrac{V_{out}}{R_S}\\) and \\(V_{GS} = V_{in}-V_{out}\\), hence\n\n\\[\n\\frac{V_{out}}{R_S}=\\frac{1}{2}k_n\\big(V_{in}-V_{out}-V_{TH}\\big)^2\n\\]\n\nwhich implicitly gives \\(V_{out}\\) vs. \\(V_{in}\\).  \n(For normal values of \\(V_{in}<V_{DD}+V_{TH}\\), the device stays in saturation.)\n\nRoughly, when the current is moderate, \\(V_{GS}\\) is almost constant, so\n\n\\[\nV_{out} \\approx V_{in}-V_{GS} \\approx V_{in}-\\text{(about }V_{TH}+V_{OV}\\text{)}\n\\]\n\ni.e. \\(V_{out}\\) “follows” \\(V_{in}\\) with an offset of one overdrive or so.\n\n3. **Very large \\(V_{in}\\)**  \n\nIf \\(V_{DS} < V_{GS}-V_{TH}\\) (approximately \\(V_{in} > V_{DD}+V_{TH}\\)),\nthe MOSFET enters the triode region; then it behaves like a small resistor\nabove \\(R_S\\), and \\(V_{out}\\) approaches \\(V_{DD}\\).\n\n---\n\n### 2. Small‑signal analysis (about a given bias point)\n\nUse the small‑signal model with transconductance \\(g_m\\) and ignore \\(r_o\\).\n\nLet small‑signal quantities be lowercase: \\(v_{in}, v_{out}\\).\n\n\\[\nv_{gs}=v_{in}-v_{out}\n\\]\n\nKCL at the output node:\n\n\\[\n\\frac{v_{out}}{R_S} + g_m(v_{in}-v_{out}) = 0\n\\]\n\nso the **voltage gain** is\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n      = \\frac{g_m R_S}{1+g_m R_S}\n\\quad (0 < A_v < 1)\n\\]\n\nThus the stage is non‑inverting with a gain slightly less than unity.\n\n**Input resistance**\n\nAt signal frequencies the gate draws essentially no current, so\n\n\\[\nR_{in} \\approx \\infty\n\\]\n\n(Practically limited by the bias network, not the MOSFET itself.)\n\n**Output resistance**\n\nSet \\(v_{in}=0\\) (gate AC‑grounded) and apply a test source \\(v_x\\) at the\noutput:\n\n\\[\n\\frac{v_x}{R_S} + g_m(0 - v_x) + i_x = 0\n\\]\n\n\\[\ni_x = \\left(g_m + \\frac{1}{R_S}\\right)v_x\n\\]\n\n\\[\nR_{out} = \\frac{v_x}{i_x}\n        = \\frac{1}{g_m + \\frac{1}{R_S}}\n        = R_S \\parallel \\frac{1}{g_m}\n\\]\n\nSo the source follower has **low output resistance** and **high input resistance**.\n\n---\n\n**Summary**\n\n- Topology: NMOS source follower (common‑drain).\n- DC: \\(V_{out}\\) follows \\(V_{in}\\) but is lower by roughly \\(V_{GS}\\).\n- Small‑signal gain: \\(A_v = \\dfrac{g_m R_S}{1+g_m R_S} \\lesssim 1\\).\n- Input resistance: very high.\n- Output resistance: \\(R_S \\parallel 1/g_m\\) (low).  \nThis makes the circuit useful as a buffer / voltage follower.",
        "format": "markdown",
        "sha256": "e2fc9a5ebc843b14399aea0b2978dfa7278936625f1c163060e8f6e0b03175f7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain \\(g_mR_S/(1+g_mR_S)\\), satisfying the full-credit rule.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 6046,
        "total_tokens": 6690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5021,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 6046,
        "total_tokens": 6690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5021,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an n‑MOS **source follower** (common–drain stage) with a source resistor \\(R_S\\).  \nDrain is at \\(V_{DD}\\), input is at the gate, and the output is the source node.\n\n---\n\n### 1. Large‑signal (DC) relations  \n\nLet\n\n- \\(V_G = V_{in}\\)\n- \\(V_S = V_{out}\\)\n- \\(I_D\\) is the drain/source current (downwards)\n\nThen\n\n\\[\nV_{GS} = V_G - V_S = V_{in} - V_{out}\n\\]\n\\[\nI_D = \\frac{V_{out}}{R_S}\n\\]\n\nAssuming saturation and neglecting channel‑length modulation,\n\n\\[\nI_D = \\frac{k_n}{2}(V_{GS} - V_{TH})^2\n      = \\frac{k_n}{2}\\big(V_{in} - V_{out} - V_{TH}\\big)^2\n\\]\n\nSo \\(V_{out}\\) must satisfy\n\n\\[\n\\boxed{\\frac{V_{out}}{R_S} = \\frac{k_n}{2}\\big(V_{in} - V_{out} - V_{TH}\\big)^2}\n\\]\n\nThe transistor conducts only when \\(V_{GS} > V_{TH}\\); otherwise \\(I_D \\approx 0\\) and \\(V_{out} \\approx 0\\).\n\nCheck of saturation:\n\n\\[\nV_{DS} = V_{DD} - V_{out}\n\\]\n\\[\n\\text{saturation if } V_{DS} \\ge V_{GS} - V_{TH}\n\\Rightarrow V_{DD} \\ge V_{in} - V_{TH}\n\\]\n\nFor typical operation \\(V_{in} < V_{DD}\\), so the device remains in saturation when on.\n\n---\n\n### 2. Small‑signal gain\n\nUse the small‑signal model with parameters \\(g_m\\) and \\(r_o\\) at the bias point.\n\nAt node \\(v_{out}\\):\n\n\\[\n\\frac{v_{out}}{R_S} + \\frac{v_{out}}{r_o} - g_m(v_{in}-v_{out}) = 0\n\\]\n\nSolve for voltage gain \\(A_v = v_{out}/v_{in}\\):\n\n\\[\nA_v\n= \\frac{g_m}{g_m + 1/R_S + 1/r_o}\n= \\frac{g_m (R_S \\parallel r_o)}{1 + g_m (R_S \\parallel r_o)}\n\\]\n\nIf \\(r_o \\gg R_S\\),\n\n\\[\n\\boxed{A_v \\approx \\frac{g_m R_S}{1 + g_m R_S}}\n\\]\n\nand for \\(g_m R_S \\gg 1\\),\n\n\\[\n\\boxed{A_v \\approx 1 \\quad\\text{(source follower)}}\n\\]\n\nThe small‑signal gate‑source voltage is\n\n\\[\nv_{gs} = v_{in} - v_{out} = \\frac{v_{in}}{1 + g_m(R_S \\parallel r_o)}\n\\]\n\nshowing strong negative feedback (small \\(v_{gs}\\) variation).\n\n---\n\n### 3. Input and output resistance\n\n- **Input resistance** (gate of MOS, ignoring leakage and capacitances):\n\n\\[\n\\boxed{R_{in} \\approx \\infty}\n\\]\n\n- **Output resistance**, with input AC‑grounded (\\(v_{in}=0\\)):\n\nConductances to ground from node \\(v_{out}\\) are \\(1/R_S\\), \\(1/r_o\\) and \\(g_m\\).\n\n\\[\n\\boxed{R_{out}\n= \\frac{1}{g_m + 1/R_S + 1/r_o}}\n\\]\n\nIf \\(g_m R_S \\gg 1\\) and \\(r_o \\gg R_S\\),\n\n\\[\n\\boxed{R_{out} \\approx \\frac{1}{g_m} \\ll R_S}\n\\]\n\n---\n\n**Summary**\n\nThe circuit is an NMOS source follower with local negative feedback through \\(R_S\\).  \nIt has very high input resistance, low output resistance, and a voltage gain slightly less than unity; the exact gain is\n\n\\[\nA_v = \\dfrac{g_m}{g_m + 1/R_S + 1/r_o}.\n\\]",
        "format": "markdown",
        "sha256": "4ff3c234b2b87cdd05a41f0a4189136e245f711cd03abf2bc052abadd6d3c87b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including a valid refinement for finite output resistance. The supplementary bias and resistance analysis is also consistent.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 5349,
        "total_tokens": 5993,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4415,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 5349,
        "total_tokens": 5993,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4415,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an NMOS **source follower** (common‑drain stage) with a source resistor \\(R_S\\).  \nGate = input, source = output, drain at \\(V_{DD}\\).\n\n---\n\n### 1. DC / Large‑signal\n\nLet \\(V_S = V_{out}\\).\n\n- \\(V_{GS}=V_{in}-V_S\\)\n- \\(V_{DS}=V_{DD}-V_S\\)\n- Current through \\(R_S\\): \\(I_D = V_S/R_S\\)\n\n**Transistor off**\n\nIf \\(V_{GS} < V_{TH}\\)  \n\\(\\Rightarrow V_{in} < V_{TH} + V_S\\). With \\(I_D=0\\) we get \\(V_S=0\\), so  \n\\[\nV_{in} < V_{TH} \\;\\Rightarrow\\; V_{out}=0\n\\]\n\n**Transistor on (usually in saturation)**\n\nIf \\(V_{in} > V_{TH}\\) and \\(V_{DD} \\ge V_{in}-V_{TH}\\) (almost always true in practice),\nM1 is in saturation and\n\\[\nI_D = \\frac{1}{2}k_n (V_{GS}-V_{TH})^2\n      =\\frac{1}{2}k_n (V_{in}-V_{out}-V_{TH})^2\n\\]\n\nEquating with \\(I_D = V_{out}/R_S\\):\n\\[\n\\boxed{\\frac{V_{out}}{R_S}=\n       \\frac{1}{2}k_n (V_{in}-V_{out}-V_{TH})^2}\n\\]\nThis implicit equation gives the DC transfer characteristic \\(V_{out}(V_{in})\\).  \nQualitatively, once M1 turns on, \\(V_{out}\\approx V_{in}-V_{GS}\\), so the output “follows” the input but is lower by roughly one \\(V_{GS}\\).\n\n---\n\n### 2. Small‑signal analysis (about a bias point)\n\nLet small‑signal variables be \\(v_{in}, v_{out}\\). Take \\(r_o\\) as the MOS output resistance.\n\nWith \\(V_{DD}\\) AC‑grounded, the small‑signal node equation at the source is\n\n\\[\n\\frac{v_{out}}{R_S} + \\frac{v_{out}}{r_o} - g_m(v_{in}-v_{out}) = 0\n\\]\n\nso\n\n\\[\n\\boxed{A_v \\equiv \\frac{v_{out}}{v_{in}}\n= \\frac{g_m}{g_m + \\dfrac{1}{R_S} + \\dfrac{1}{r_o}} }\n\\]\n\nIf \\(r_o \\gg R_S\\),\n\n\\[\nA_v \\approx \\frac{g_m R_S}{1 + g_m R_S}\n\\]\nand for \\(g_m R_S \\gg 1\\), \\(A_v \\approx 1\\) (voltage follower).\n\n**Input resistance**\n\nGate current is (ideally) zero:\n\n\\[\n\\boxed{R_{in} \\approx \\infty}\n\\]\n\n**Output resistance**\n\nSet \\(v_{in}=0\\) and apply a test voltage \\(v_x\\) at the output:\n\n\\[\ni_x = \\frac{v_x}{R_S} + \\frac{v_x}{r_o} + g_m v_x\n\\]\n\nso\n\n\\[\n\\boxed{R_{out} = \\frac{v_x}{i_x}\n      = \\frac{1}{g_m + \\dfrac{1}{R_S} + \\dfrac{1}{r_o}}}\n\\]\n\nFor \\(R_S\\) large and \\(r_o \\gg 1/g_m\\), \\(R_{out} \\approx 1/g_m\\) (low).\n\n---\n\n**Summary**\n\n- Circuit type: NMOS source follower (common‑drain amplifier) with source resistor.\n- DC: \\(V_{out}=0\\) for \\(V_{in}<V_{TH}\\); for higher \\(V_{in}\\), \\(V_{out}\\) satisfies the equation above and roughly tracks \\(V_{in}-V_{GS}\\).\n- Small‑signal: high input resistance, low output resistance, voltage gain slightly less than 1.",
        "format": "markdown",
        "sha256": "a5f4bb1d7e0949b734fa23a7e02e8c1d228326b7525d9fc0923d5bd8f4e05eef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, less-than-unity gain, including the finite-r_o refinement. The additional output-resistance and DC analysis are consistent with the stated assumptions.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 5383,
        "total_tokens": 6027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4457,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 5383,
        "total_tokens": 6027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4457,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common‑source NMOS stage with a resistive load** (also used as a resistively loaded NMOS inverter).\n\nLet M1 be an n‑MOSFET with source at ground, gate driven by \\(V_{in}\\), and drain at \\(V_{out}\\).  \nThe resistor \\(R_D\\) pulls the drain up to \\(V_{DD}\\).\n\n---\n\n### 1. DC (large‑signal) analysis\n\nCurrent through \\(R_D\\) equals the drain current of M1:\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}\n\\]\n\nFor the MOSFET (neglecting body effect and channel‑length modulation) with\n\n\\[\nV_{GS}=V_{in},\\qquad V_{DS}=V_{out},\n\\]\nand threshold \\(V_{tn}\\), introduce \\(\\beta = \\mu_n C_{ox}\\tfrac{W}{L}\\).\n\n#### a) Cutoff (\\(V_{in} < V_{tn}\\))\n\n\\[\nI_D \\approx 0 \\Rightarrow V_{out} \\approx V_{DD}\n\\]\n\nTransistor off, output high.\n\n---\n\n#### b) Saturation region  \n\nCondition: \\(V_{in} > V_{tn}\\) and \\(V_{out} \\ge V_{in}-V_{tn}\\).\n\nMOSFET equation:\n\n\\[\nI_D = \\frac{1}{2}\\beta (V_{in}-V_{tn})^{2}\n\\]\n\nEquate with resistor current:\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D} = \\frac{1}{2}\\beta (V_{in}-V_{tn})^{2}\n\\]\n\n\\[\n\\boxed{V_{out} = V_{DD} - \\frac{1}{2}\\beta R_D (V_{in}-V_{tn})^{2}}\n\\]\n\nIn this range \\(V_{out}\\) decreases approximately quadratically as \\(V_{in}\\) increases.\n\n---\n\n#### c) Triode (linear) region  \n\nCondition: \\(V_{in} > V_{tn}\\) and \\(V_{out} < V_{in}-V_{tn}\\).\n\nMOSFET equation:\n\n\\[\nI_D = \\beta\\Big[(V_{in}-V_{tn})V_{out} - \\tfrac{1}{2}V_{out}^{2}\\Big]\n\\]\n\nEquate:\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n  =\\beta\\Big[(V_{in}-V_{tn})V_{out}-\\tfrac{1}{2}V_{out}^{2}\\Big]\n\\]\n\nwhich is a quadratic equation in \\(V_{out}\\) that gives \\(V_{out}(V_{in})\\) in this region.\n\nThe boundary between saturation and triode occurs when\n\n\\[\nV_{out}=V_{in}-V_{tn}\n\\]\n\nSubstituting this into the current equality gives the corresponding \\(V_{in}\\) at the transition.\n\n---\n\n### 2. Qualitative behavior (logic view)\n\n- For **low** \\(V_{in}\\) (< \\(V_{tn}\\)): M1 off, \\(V_{out}\\approx V_{DD}\\) (logic ‘1’).\n- For **high** \\(V_{in}\\): M1 on, a large current flows, and \\(V_{out}\\) is pulled **down** close to 0 (logic ‘0’), limited by \\(I_D R_D\\).\n\nThus the circuit functions as an **inverter** / **inverting amplifier**.\n\n---\n\n### 3. Small‑signal gain (when biased in saturation)\n\nChoose a bias \\(V_{in0}\\) that puts M1 in saturation with drain current \\(I_{D0}\\).\n\nTransconductance:\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}}\n     = \\beta (V_{in0}-V_{tn})\n     = \\frac{2I_{D0}}{V_{in0}-V_{tn}}\n\\]\n\nNeglecting \\(r_o\\) (no channel‑length modulation), the small‑signal voltage gain is\n\n\\[\n\\boxed{A_v \\approx -g_m R_D}\n\\]\n\nInput resistance is very high (MOS gate), and the output resistance is approximately \\(R_D\\) (or \\(R_D \\parallel r_o\\) if \\(r_o\\) is included).\n\nSo the circuit is a common‑source NMOS amplifier / inverter with negative gain and output swing between about 0 and \\(V_{DD}\\).",
        "format": "markdown",
        "sha256": "f255cf0ae17f1ec0001b767b9f0573ba65ce25b3ccb16776797b60e0a822c2cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology: Vin is applied to M1’s source, while its gate is DC-biased and AC-grounded. Thus this is a common-gate stage with approximately 1/gm input resistance and non-inverting gain, not the common-source inverter analyzed here.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 7667,
        "total_tokens": 8311,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6689,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 7667,
        "total_tokens": 8311,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6689,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an n‑MOSFET with a resistor load – a common‑source stage (or nMOS inverter with a resistive load).  \n\\(R_D\\) is connected from \\(V_{DD}\\) to the drain; the source is at ground; the gate is driven by \\(V_{in}\\). The output is the drain voltage \\(V_{out}\\).\n\nLet  \n\n- Threshold: \\(V_t\\)  \n- Process parameter: \\(\\beta_n=\\mu_n C_{ox}\\dfrac{W}{L}\\)  \n\nCurrent through the resistor:\n\n\\[\nI_D = I_R = \\frac{V_{DD}-V_{out}}{R_D}\n\\]\n\nMOSFET relations (ignoring channel‑length modulation):\n\n\\[\n\\begin{aligned}\n\\text{Cutoff:} &\\quad V_{GS}<V_t \\Rightarrow I_D\\approx 0\\\\[2mm]\n\\text{Saturation:} &\\quad V_{GS}\\ge V_t,\\; V_{DS}\\ge V_{GS}-V_t:\\\\\n&\\quad I_D = \\tfrac{1}{2}\\beta_n(V_{GS}-V_t)^2\\\\[2mm]\n\\text{Triode:} &\\quad V_{GS}\\ge V_t,\\; V_{DS}< V_{GS}-V_t:\\\\\n&\\quad I_D = \\beta_n \\left[(V_{GS}-V_t)V_{DS}-\\tfrac{1}{2}V_{DS}^2\\right]\n\\end{aligned}\n\\]\n\nHere \\(V_{GS}=V_{in}\\), \\(V_{DS}=V_{out}\\).\n\n---\n\n### DC transfer characteristic \\(V_{out}(V_{in})\\)\n\n1. **Cutoff region** (\\(V_{in}<V_t\\))  \n   \\(M_1\\) is off, \\(I_D\\simeq 0\\):\n\n   \\[\n   V_{out} \\simeq V_{DD}\n   \\]\n\n2. **Saturation region** (\\(V_{in}\\ge V_t\\) and \\(V_{out}\\ge V_{in}-V_t\\))  \n\n   \\[\n   \\frac{V_{DD}-V_{out}}{R_D}\n   = \\tfrac{1}{2}\\beta_n(V_{in}-V_t)^2\n   \\]\n\n   so\n\n   \\[\n   V_{out}=V_{DD}-\\tfrac{1}{2}\\beta_n R_D (V_{in}-V_t)^2\n   \\]\n\n   This holds until the boundary \\(V_{out}=V_{in}-V_t\\).\n\n3. **Triode region** (\\(V_{in}\\ge V_t\\) and \\(V_{out}<V_{in}-V_t\\))  \n\n   \\[\n   \\frac{V_{DD}-V_{out}}{R_D}\n   =\\beta_n\\!\\left[(V_{in}-V_t)V_{out}-\\tfrac{1}{2}V_{out}^2\\right]\n   \\]\n\n   which is a quadratic equation in \\(V_{out}\\). \\(V_{out}\\) continues to decrease toward 0 as \\(V_{in}\\) increases.\n\nOverall, for low \\(V_{in}\\) the output is high (≈\\(V_{DD}\\)); for high \\(V_{in}\\) the output is low (≈0): the circuit behaves as an inverting stage (logic inverter / common‑source amplifier).\n\n---\n\n### Logic switching point\n\nThe logical switching point \\(V_M\\) is often defined by \\(V_{in}=V_{out}=V_M\\).  \nAt this point the device is in saturation, so\n\n\\[\n\\frac{V_{DD}-V_M}{R_D} = \\tfrac{1}{2}\\beta_n (V_M - V_t)^2\n\\]\n\nor\n\n\\[\n\\tfrac{1}{2}\\beta_n R_D (V_M-V_t)^2 + V_M - V_{DD} = 0\n\\]\n\nThis quadratic gives \\(V_M\\) in terms of \\(V_{DD},R_D,\\beta_n,V_t\\).\n\n---\n\n### Small‑signal (analog) behavior\n\nIf biased so that \\(M_1\\) is in saturation:\n\n- Transconductance: \\(g_m = \\beta_n (V_{GS}-V_t)\\).\n- Small‑signal gain (ignoring \\(r_o\\)):\n\n  \\[\n  A_v = \\frac{v_{out}}{v_{in}} \\approx -g_m R_D\n  \\]\n\nso the stage provides voltage gain with a 180° phase inversion.",
        "format": "markdown",
        "sha256": "36114c5eb4e7888053fc0bca8356d36e5bcd4ff7d82e5521c61fd3770bdd7907"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the input and bias connections: this is a common-gate stage with Vin at M1’s source and its gate AC-grounded, not a common-source inverter. Its claimed inverting gain and DC transfer analysis therefore do not apply; the correct small-signal gain is non-inverting and the input resistance is approximately 1/gm.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 7009,
        "total_tokens": 7653,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6018,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 7009,
        "total_tokens": 7653,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6018,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common–source NMOS stage with a resistive load** \\(R_D\\).\n\nAssumptions:  \n– \\(M_1\\) is an enhancement‑type nMOS, source and body at 0 V.  \n– Channel‑length modulation neglected (\\(\\lambda \\approx 0\\)).  \n– Define \\(\\beta \\equiv \\mu_n C_{\\text{ox}}\\frac{W}{L}\\).\n\n---\n\n### 1. DC operating regions (transfer characteristic \\(V_{\\text{out}}(V_{\\text{in}})\\))\n\nBecause the source is at 0 V,\n\\[\nV_{GS}=V_{\\text{in}},\\qquad V_{DS}=V_{\\text{out}}\n\\]\nThe drain current must also satisfy Ohm’s law through \\(R_D\\):\n\\[\nI_D = \\frac{V_{DD}-V_{\\text{out}}}{R_D}\n\\]\n\n#### (a) Cutoff: \\(0\\le V_{\\text{in}}<V_{TH}\\)\n\n\\[\nI_D \\approx 0 \\;\\Rightarrow\\; V_{\\text{out}} \\approx V_{DD}\n\\]\n\n#### (b) Saturation:  \nConditions: \\(V_{\\text{in}}\\ge V_{TH}\\) and \\(V_{\\text{out}}\\ge V_{\\text{in}}-V_{TH}\\).\n\nMOS current:\n\\[\nI_D = \\frac{1}{2}\\beta (V_{\\text{in}}-V_{TH})^2\n\\]\n\nEquate to the resistor current:\n\\[\n\\frac{1}{2}\\beta (V_{\\text{in}}-V_{TH})^2\n    = \\frac{V_{DD}-V_{\\text{out}}}{R_D}\n\\]\n\nHence, in saturation\n\\[\n\\boxed{V_{\\text{out}} = V_{DD}\n      -\\frac{1}{2}\\beta R_D (V_{\\text{in}}-V_{TH})^2}\n\\]\nvalid while \\(V_{\\text{out}}\\ge V_{\\text{in}}-V_{TH}\\).\n\nThe boundary to triode is found from\n\\[\nV_{\\text{out}} = V_{\\text{in}}-V_{TH}\n\\]\nsubstituted into the previous equation, giving a quadratic in\n\\(x=V_{\\text{in}}-V_{TH}\\):\n\\[\n\\frac{1}{2}\\beta R_D x^2 + x - V_{DD}=0\n\\]\n\\[\nx = \\frac{-1 +\\sqrt{1+2\\beta R_D V_{DD}}}{\\beta R_D}\n\\]\nand \\(V_{\\text{in,\\,sat→tri}} = V_{TH}+x\\).\n\n#### (c) Triode (linear region):  \nConditions: \\(V_{\\text{in}}\\ge V_{TH}\\) and \\(V_{\\text{out}}<V_{\\text{in}}-V_{TH}\\).\n\nMOS current:\n\\[\nI_D = \\beta\\left[(V_{\\text{in}}-V_{TH})V_{\\text{out}}\n               -\\frac{V_{\\text{out}}^2}{2}\\right]\n\\]\n\nEquating to \\((V_{DD}-V_{\\text{out}})/R_D\\) and solving for\n\\(V_{\\text{out}}\\) gives a quadratic; symbolically:\n\\[\n\\beta R_D V_{\\text{out}}^2\n-2\\big[\\beta R_D (V_{\\text{in}}-V_{TH})+1\\big]V_{\\text{out}}\n+2V_{DD}=0\n\\]\nwhose physically relevant (smaller) root yields \\(V_{\\text{out}}(V_{\\text{in}})\\) in triode.\nFor sufficiently large \\(V_{\\text{in}}\\), \\(M_1\\) is very strong and\n\\(V_{\\text{out}}\\rightarrow 0\\).\n\nThus the circuit behaves as an **inverter**:  \nlow \\(V_{\\text{in}}\\) → \\(V_{\\text{out}}\\approx V_{DD}\\);  \nhigh \\(V_{\\text{in}}\\) → \\(V_{\\text{out}}\\approx 0\\).\n\n---\n\n### 2. Small‑signal gain (when biased in saturation)\n\nIf a DC bias \\(V_{\\text{IN,0}}\\) places \\(M_1\\) in saturation\nwith quiescent current \\(I_{D0}\\) and output \\(V_{\\text{OUT,0}}\\),\nthe small‑signal parameters are\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}}\n    = \\beta (V_{\\text{IN,0}}-V_{TH})\n    = \\sqrt{2\\beta I_{D0}}\n\\]\n\nIgnoring MOS \\(r_o\\),\n\n\\[\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}\n    \\approx -g_m R_D\n\\]\n\nSo around its bias point (with \\(M_1\\) in saturation) the stage is a\n**common‑source amplifier** with negative gain of magnitude \\(g_mR_D\\).",
        "format": "markdown",
        "sha256": "55793ba9454d052d3767090a6ac9a7766da6a22debc4fec001e1f95dae664640"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the input as a gate input and the source as grounded. The circuit is common-gate with input at the source, so the candidate's common-source analysis and negative-gain conclusion do not apply.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 6408,
        "total_tokens": 7052,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5305,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 6408,
        "total_tokens": 7052,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5305,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "- The MOSFET \\(M_1\\) is an NMOS whose **gate** is biased by the dc source \\(V_b\\); the input signal is **ac‑coupled into the source** through \\(C_1\\), and the output is taken at the drain through the load resistor \\(R_D\\).  \n- Thus, for small signals the gate is at ac ground and the circuit is a **common‑gate amplifier**.\n\n---\n\n### DC (bias) analysis\n\nFor dc, the capacitor \\(C_1\\) is open, so the source of \\(M_1\\) is at 0 V (assuming the input source has zero dc component) and\n\n\\[\nV_{GS} = V_b, \\qquad V_{DS} = V_{out,DC}.\n\\]\n\nIf \\(M_1\\) is in saturation,\n\n\\[\nI_D = \\frac{1}{2}k_n\\frac{W}{L}(V_b-V_{th})^2 (1+\\lambda V_{DS})\n\\]\n\nand\n\n\\[\nV_{out,DC} = V_{DD} - I_D R_D.\n\\]\n\n(Saturation must also satisfy \\(V_{out,DC} \\ge V_b - V_{th}\\).)\n\n---\n\n### Midband small‑signal analysis ( \\(C_1\\) large, \\(\\lambda\\approx0\\) )\n\nFor ac:\n\n- \\(V_{DD}\\) and \\(V_b\\) are ac ground.\n- \\(C_1\\) is an ac short, so \\(v_s = v_{in}\\).\n- \\(v_g = 0\\), hence \\(v_{gs} = -v_{in}\\).\n\nThe small‑signal drain current is\n\n\\[\ni_d = g_m v_{gs} = -g_m v_{in}.\n\\]\n\nThe ac voltage at the drain (output) is found from the current through \\(R_D\\):\n\n\\[\n\\frac{v_{out}}{R_D} + i_d = 0\n\\Rightarrow\n\\frac{v_{out}}{R_D} - g_m v_{in} = 0\n\\Rightarrow\nv_{out} = g_m R_D\\, v_{in}.\n\\]\n\nSo the **voltage gain** is\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}} \\approx +g_m R_D\n\\]\n\n(noninverting).\n\nIf channel‑length modulation is included (\\(r_o\\) finite),\n\n\\[\nA_v = (g_m + 1/r_o)(R_D \\parallel r_o)\n\\approx g_m (R_D \\parallel r_o) \\quad\\text{for } g_m r_o \\gg 1.\n\\]\n\n---\n\n### Input and output resistances\n\nLooking into the **source** (through \\(C_1\\)), with the drain connected as shown and gate at ac ground, the small‑signal source current is approximately\n\n\\[\ni_{in} \\approx g_m v_{in},\n\\]\n\nso\n\n\\[\nR_{in} \\approx \\frac{v_{in}}{i_{in}} \\approx \\frac{1}{g_m}\n\\quad\n\\text{(low input resistance, characteristic of a common‑gate stage).}\n\\]\n\nLooking into the **drain** with the input set to ac ground (\\(v_{in}=0\\Rightarrow v_s=0\\)),\n\n- \\(R_D\\) goes to ground,\n- the transistor presents \\(r_o\\) from drain to source (which is at ground).\n\nHence\n\n\\[\nR_{out} \\approx R_D \\parallel r_o\n\\approx R_D \\quad (\\text{if } r_o \\gg R_D).\n\\]\n\n---\n\n### Role of \\(C_1\\)\n\n\\(C_1\\) isolates the dc bias of the amplifier from the previous stage and, with the input resistance \\(R_{in} \\approx 1/g_m\\), forms a **high‑pass** input:\n\n\\[\n\\omega_L \\approx \\frac{g_m}{C_1}, \\qquad\nf_L \\approx \\frac{g_m}{2\\pi C_1}.\n\\]\n\nSo the figure implements a common‑gate NMOS voltage amplifier with gain \\(\\approx g_m R_D\\), low input resistance \\(\\approx 1/g_m\\), and output resistance \\(\\approx R_D\\).",
        "format": "markdown",
        "sha256": "a9987e5b10927c3c9f49b992556c2a0cd985bc80e3554d2d446d9ccff14343ef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the common-gate topology but misses that the source node is directly shorted to ground, so it incorrectly treats the input as reaching the source and predicts gain \\(g_mR_D\\).",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 16160,
        "total_tokens": 16804,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15227,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 16160,
        "total_tokens": 16804,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15227,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common‑source NMOS amplifier** with:\n\n- drain load \\(R_D\\),\n- source at ac and dc ground,\n- gate biased to a dc voltage \\(V_b\\),\n- input signal \\(v_{in}\\) coupled to the gate through \\(C_1\\).\n\nThe capacitor prevents the signal source from disturbing the dc bias of M1.\n\n---\n\n### 1. DC (bias) analysis\n\nAt dc the capacitor is open, so \\(v_{in}\\) is disconnected and the gate is at \\(V_G = V_b\\).\n\nFor an NMOS with source at ground:\n\n\\[\nV_{GS} = V_b\n\\]\n\nAssuming \\(V_b > V_{TH}\\), M1 conducts.  \nIf M1 is in saturation (the usual design choice),\n\n\\[\nI_D \\approx \\frac{1}{2}k_n'\\frac{W}{L}\\,(V_b - V_{TH})^2 (1+\\lambda V_{DS})\n\\]\n\nNeglecting channel‑length modulation \\((\\lambda \\approx 0)\\):\n\n\\[\nI_D = \\frac{1}{2}k_n'\\frac{W}{L}\\,(V_b - V_{TH})^2\n\\]\n\nDrain (and quiescent output) voltage:\n\n\\[\nV_{D} = V_{OUT,DC} = V_{DD} - I_D R_D\n\\]\n\nSaturation condition:\n\n\\[\nV_{DS} = V_D \\ge V_{GS} - V_{TH} = V_b - V_{TH}\n\\]\n\nwhich gives a constraint on \\(R_D\\) and \\(V_b\\).\n\n---\n\n### 2. Small‑signal (midband) analysis\n\nFor small‑signal analysis:\n\n- replace \\(V_{DD}\\) and \\(V_b\\) with ac ground,\n- short \\(C_1\\) (assuming midband so \\(X_{C_1} \\approx 0\\)),\n- model the transistor with \\(g_m\\) and \\(r_o\\).\n\nThe small‑signal gate voltage is essentially \\(v_{in}\\) (since \\(V_b\\) is ac ground):\n\n\\[\nv_{gs} = v_g - v_s = v_{in} - 0 = v_{in}\n\\]\n\nWriting KCL at the drain node:\n\n\\[\n\\frac{v_o}{R_D} + \\frac{v_o}{r_o} + g_m v_{gs} = 0\n\\]\n\n\\[\n\\Rightarrow \\frac{v_o}{R_D} + \\frac{v_o}{r_o} + g_m v_{in} = 0\n\\]\n\nThus the small‑signal gain is\n\n\\[\nA_v = \\frac{v_o}{v_{in}} =\n -\\,g_m (R_D \\parallel r_o)\n\\]\n\nIf channel‑length modulation is neglected \\((r_o \\to \\infty)\\):\n\n\\[\nA_v \\approx -g_m R_D\n\\]\n\nThe minus sign indicates inversion (a positive \\(v_{in}\\) gives a negative \\(v_o\\)).\n\nHere\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}}\n   \\approx \\frac{2I_D}{V_{OV}}\n   = \\sqrt{2k_n'\\frac{W}{L}I_D}\n\\]\n\nwith overdrive \\(V_{OV} = V_{GS} - V_{TH} = V_b - V_{TH}\\).\n\n---\n\n### 3. Input and output resistances\n\n- **Input resistance of the transistor stage (at the gate):**\n\n  The MOS gate draws negligible dc or ac current, so\n\n  \\[\n  R_{in,gate} \\approx \\infty\n  \\]\n\n  (In practice it is limited by the bias network that implements \\(V_b\\).)\n\n- **Output resistance** (looking into the drain with input ac‑grounded):\n\n  \\[\n  R_{out} = R_D \\parallel r_o\n  \\]\n\n---\n\n### 4. Effect of the coupling capacitor \\(C_1\\)\n\nAt low frequencies, \\(C_1\\) and the resistance seen from its terminals form a high‑pass.  \nIf the signal source has resistance \\(R_S\\) and the bias source \\(V_b\\) is ideal (ac ground), the pole is\n\n\\[\n\\omega_{L} \\approx \\frac{1}{R_S C_1},\n\\qquad\nf_L = \\frac{1}{2\\pi R_S C_1}\n\\]\n\nAt midband (\\(\\omega \\gg \\omega_L\\)) the above gain expression applies.\n\n---\n\nSummary: the circuit is a capacitively coupled, gate‑biased common‑source NMOS amplifier. Its dc operating point is set by \\(V_b\\) and \\(R_D\\), and its midband small‑signal gain is\n\\[\nA_v = -g_m (R_D \\parallel r_o) \\approx -g_m R_D\n\\]\nwith very high input resistance and output resistance \\(R_D \\parallel r_o\\).",
        "format": "markdown",
        "sha256": "48190a2e6b531ece772fc0f59c41edd92afcf773f30a117586125004d3f4b0c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the input as coupled to the gate and analyzes a common-source amplifier. In the actual circuit, the input is applied to the source node, which is directly shorted to ground, so the ideal gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8435,
        "total_tokens": 9079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7363,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8435,
        "total_tokens": 9079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7363,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common‑source nMOS amplifier** with the input coupled through a capacitor and the gate DC‑biased by \\(V_b\\).\n\n---\n\n### 1. DC (bias) analysis  \n\nAt DC the capacitor \\(C_1\\) is open, so \\(V_{in}\\) is disconnected and the gate is held at the constant bias \\(V_b\\).\n\n- Source: \\(V_S = 0\\)\n- Gate: \\(V_G = V_b\\)\n- Drain: \\(V_D = V_{DD} - I_D R_D\\)\n\nThus\n\n\\[\nV_{GS} = V_b,\n\\qquad\nV_{DS} = V_{DD} - I_D R_D\n\\]\n\nIf the transistor is biased in saturation (the usual case for an amplifier), we need\n\n\\[\nV_{DS} \\ge V_{GS} - V_{TH} = V_b - V_{TH}\n\\]\n\nand, neglecting channel‑length modulation,\n\n\\[\nI_D = \\frac{1}{2}k_n (V_b - V_{TH})^2,\n\\quad\nk_n = \\mu_n C_{ox}\\frac{W}{L}\n\\]\n\nThen\n\n\\[\nV_D = V_{DD} - R_D I_D\n\\]\n\nThis sets the quiescent point and determines the small‑signal transconductance\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}}\n    = k_n (V_b - V_{TH})\n    = \\frac{2I_D}{V_b - V_{TH}}\n\\]\n\n---\n\n### 2. Small‑signal midband gain\n\nFor small‑signal analysis:\n\n- Treat \\(C_1\\) as a short (midband frequencies).\n- AC‑ground the DC sources \\(V_{DD}\\) and \\(V_b\\).\n- Use the small‑signal model of the MOSFET with transconductance \\(g_m\\) (and optionally output resistance \\(r_o\\)).\n\nSince the source is at AC ground,  \n\n\\[\nv_{gs} = v_g - v_s = v_{in} - 0 = v_{in}\n\\]\n\nThe small‑signal drain current is\n\n\\[\ni_d = g_m v_{in}\n\\]\n\nThe drain node sees \\(R_D\\) to AC ground (and \\(r_o\\) to ground if included). Writing KCL at \\(v_{out}\\):\n\n\\[\n\\frac{v_{out}}{R_D} + \\frac{v_{out}}{r_o} + g_m v_{in} = 0\n\\]\n\nHence the voltage gain is\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n= -g_m (R_D \\parallel r_o)\n\\]\n\nIf \\(r_o \\gg R_D\\),\n\n\\[\nA_v \\approx -g_m R_D\n\\]\n\nSo the stage is inverting, with gain magnitude set mainly by \\(g_m\\) (which is controlled by \\(V_b\\)) and \\(R_D\\).\n\n---\n\n### 3. Input and output resistances\n\n- **Input resistance**: the MOS gate is (ideally) open‑circuit, so looking into the left side of \\(C_1\\) the resistance is essentially that of the signal source; the capacitor only introduces a high‑pass corner\n\n\\[\nf_L \\approx \\frac{1}{2\\pi C_1 R_S}\n\\]\n\nwhere \\(R_S\\) is the source resistance of \\(V_{in}\\).\n\n- **Output resistance**: with \\(v_{in}=0\\)\n\n\\[\nR_{out} \\approx R_D \\parallel r_o\n\\]\n\n---\n\nIn summary, this is a capacitively‑coupled common‑source MOS amplifier whose midband gain is approximately\n\n\\[\nv_{out} \\approx -g_m R_D\\, v_{in}\n\\]\n\nwith \\(g_m\\) set by the gate‑bias voltage \\(V_b\\).",
        "format": "markdown",
        "sha256": "e74f7d07f255d0dc681bda80d26f475946fe9666b0cd78de07a5491d58a4e27e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the input as driving the gate and analyzes a common-source stage. In the figure, Vin is coupled to the source, which is hard-shorted to ground, so the input is shorted and the ideal gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 10396,
        "total_tokens": 11040,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9548,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 10396,
        "total_tokens": 11040,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9548,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**.\n\nReason: only two independent nodes can store energy—the gate node and the drain (output) node, each loaded by capacitances (C\\_GS, C\\_GD at the gate; C\\_GD, C\\_DB at the drain).  \nThe source is tied to ac ground, so C\\_SB is effectively connected from ground to ground and does not introduce another state variable. Thus the transfer function is second order, with **2 poles**.",
        "format": "markdown",
        "sha256": "da28bcb5104f6a42b3897736983603f3235f3790dcb6a14d1993d4cebb4b02cc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and notes that C_SB is shorted between grounded terminals, so it adds no state variable.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 11311,
        "total_tokens": 11959,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11202,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 11311,
        "total_tokens": 11959,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11202,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **three poles**.\n\nThere are three independent nodes whose voltages can store energy via capacitances:\n- Gate node: capacitance \\(C_{GS}\\) (and coupling via \\(C_{GD}\\))\n- Drain node: capacitance \\(C_{DB}\\) (and coupling via \\(C_{GD}\\))\n- Source node: capacitance \\(C_{SB}\\)\n\nEach independent dynamic node contributes one pole, so the transfer function is third‑order (three poles).",
        "format": "markdown",
        "sha256": "4fcdf3e0531136915bca9c83977691f72edd3c5fdffa6d4358de8b6ac22fa3b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The pole count is wrong: the source is grounded, so CSB has zero voltage and stores no energy; the remaining capacitor voltages have only two independent degrees of freedom. The answer recognizes the capacitors but incorrectly treats the source as a dynamic node.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 8018,
        "total_tokens": 8666,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7913,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 8018,
        "total_tokens": 8666,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7913,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **three poles**.\n\nReason: The order of the transfer function is equal to the number of independent dynamic nodes (nodes that have capacitance and a resistive path). Here those nodes are:\n\n1. **Gate node** – capacitances \\(C_{GS}\\) and \\(C_{GD}\\)\n2. **Drain/output node** – capacitances \\(C_{DB}\\) and \\(C_{GD}\\)\n3. **Source node** – capacitance \\(C_{SB}\\)\n\nAlthough there are four capacitors, they are connected among only these three nodes and ground, so the capacitance matrix has rank 3, giving a third‑order system → **3 poles**. (If \\(C_{SB}\\) were neglected or the source were at AC ground, you’d get 2 poles.)",
        "format": "markdown",
        "sha256": "5fd128d9016fb14dbb6685bb8b987829eb182b5d831a8ba5ae7be716b4948792"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The circuit has two poles, not three: the source is grounded, so both terminals of CSB are at ground and it stores no energy. The answer identifies relevant capacitors but incorrectly treats the grounded source as a dynamic node.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 7635,
        "total_tokens": 8283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7462,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 7635,
        "total_tokens": 8283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7462,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The MOSFET \\(M_1\\) works as a transconductance device and the resistors\n\\(R_1,R_2\\) return a fraction of the output voltage to the gate (node \\(V_F\\)).\nThe source terminal is the signal input \\(V_{in}\\).\n\n---\n\n### Feedback network\nWith the drain node as the output,\n\n\\[\nV_F=\\beta V_{out}, \\qquad \n\\beta=\\frac{R_2}{R_1+R_2}\n\\]\n\n(since \\(R_1\\) is from \\(V_{out}\\) to \\(V_F\\) and \\(R_2\\) from \\(V_F\\) to ground).\n\n---\n\n### Small‑signal gain \\(A_v=V_{out}/V_{in}\\)\n\nTake \\(V_{DD}\\) as ac ground and neglect \\(r_o\\) of the transistor.\nFor small signals,\n\n\\[\ni_d = g_m (v_g - v_s)=g_m(v_F-v_{in})\n\\]\n\nThis current flows through \\(R_D\\), giving\n\n\\[\nv_{out} = -i_d R_D = -g_m R_D (v_F - v_{in})\n\\]\n\nUsing \\(v_F=\\beta v_{out}\\),\n\n\\[\nv_{out} = -g_m R_D (\\beta v_{out} - v_{in})\n\\]\n\n\\[\nv_{out} + g_m R_D \\beta v_{out} = g_m R_D v_{in}\n\\]\n\n\\[\nA_v\\equiv \\frac{v_{out}}{v_{in}}=\n\\frac{g_m R_D}{1+g_m R_D \\beta}\n\\]\n\nThus the loop gain is\n\n\\[\nT = A \\beta = g_m R_D \\beta\n\\]\n\nWhen \\(T \\gg 1\\),\n\n\\[\nA_v \\approx \\frac{1}{\\beta}\n      =\\frac{R_1+R_2}{R_2}\n      =1+\\frac{R_1}{R_2}\n\\]\n\nSo the circuit behaves as a **non‑inverting voltage amplifier** whose gain is\nset mainly by the resistor ratio.\n\n---\n\n### Input resistance\n\nWithout feedback (gate at ac ground), the resistance seen at the source is\n\n\\[\nR_{in,0}=\\frac{1}{g_m}\n\\]\n\nWith series–shunt feedback, the input resistance is increased by\n\\(1+T\\):\n\n\\[\nR_{in} = R_{in,0}(1+T)\n       = \\frac{1}{g_m}(1+g_m R_D\\beta)\n\\]\n\nFor \\(T\\gg 1\\),\n\n\\[\nR_{in}\\approx \\frac{R_D R_2}{R_1+R_2} = \\beta R_D\n\\]\n\n---\n\n### Output resistance\n\nWithout feedback (ignoring \\(r_o\\)), the output resistance is\n\n\\[\nR_{out,0}=R_D\n\\]\n\nWith shunt sampling, it is reduced by \\(1+T\\):\n\n\\[\nR_{out}=\\frac{R_D}{1+g_m R_D\\beta}\n\\]\n\nThus the circuit is a **voltage amplifier with series–shunt (voltage–series) negative feedback**: high input resistance, low output resistance, and a gain approximately \\(1+R_1/R_2\\) when the loop gain is large.",
        "format": "markdown",
        "sha256": "3cafac8bb70483ee830c68c4716b9ef23b52295a2cf1928a38cde08c7db6972f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the source input, divider feedback to the gate, negative feedback, and the non-inverting high-loop-gain result. However, it uses RD rather than the loaded resistance RD || (R1+R2) without stating the condition that makes this approximation valid, so its finite-loop-gain and derived resistance expressions are not generally correct.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 10068,
        "total_tokens": 10712,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9340,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 10068,
        "total_tokens": 10712,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9340,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common–source MOSFET amplifier with **voltage–series negative feedback**.  \n\\(R_D\\) provides load at the drain, and \\(R_1\\)–\\(R_2\\) feed back a portion of the output voltage to the source node \\(V_F\\).\n\n---\n\n### 1. Operating point (qualitative)\n\n- Gate current ≈ 0, so the input does not affect DC bias directly.\n- A DC current flows from \\(V_{DD}\\) through \\(R_D\\), the MOSFET \\(M_1\\) and \\(R_2\\) to ground; part of the drain current also flows through \\(R_1\\).\n- The feedback through \\(R_1\\) and \\(R_2\\) raises the source voltage \\(V_F\\), reducing \\(V_{GS}=V_{in}-V_F\\) until the transistor current satisfies KCL at both nodes.  \n  This is self‑biasing with negative feedback.\n\n(Exact DC values require device parameters and resistor values.)\n\n---\n\n### 2. Small‑signal model\n\nAssume:\n\n- \\(M_1\\) in saturation;\n- small‑signal parameters are \\(g_m\\) and \\(r_o\\) (you can set \\(r_o\\to\\infty\\) if channel‑length modulation is neglected);\n- \\(V_{DD}\\) is AC ground.\n\nSmall‑signal circuit:\n\n- \\(R_D\\) from \\(v_o\\) to ground,\n- \\(R_1\\) from \\(v_o\\) to \\(v_F\\),\n- \\(R_2\\) from \\(v_F\\) to ground,\n- MOSFET: current source \\(g_m v_{gs}\\) from drain to source in parallel with \\(r_o\\) between drain and source,\n- \\(v_{gs}=v_{in}-v_F\\).\n\n---\n\n### 3. Closed‑loop gain \\(A_v = v_o/v_{in}\\) (ignoring \\(r_o\\))\n\nWrite KCL at nodes \\(v_o\\) (drain) and \\(v_F\\) (source).\n\nAt \\(v_o\\):\n\\[\n\\frac{v_o}{R_D} + \\frac{v_o - v_F}{R_1} + g_m(v_{in}-v_F)=0 \\tag{1}\n\\]\n\nAt \\(v_F\\):\n\\[\n\\frac{v_F}{R_2} + \\frac{v_F - v_o}{R_1} - g_m(v_{in}-v_F)=0 \\tag{2}\n\\]\n\nAdding (1) and (2) eliminates the \\(g_m\\) and \\(R_1\\) terms:\n\\[\n\\frac{v_o}{R_D} + \\frac{v_F}{R_2} = 0 \\quad\\Rightarrow\\quad\nv_F = -\\frac{R_2}{R_D}v_o \\tag{3}\n\\]\n\nSubstitute (3) into (1) and solve for \\(A_v=v_o/v_{in}\\):\n\n\\[\nA_v = \\frac{v_o}{v_{in}}\n     = -\\frac{g_m R_D R_1}{R_1+R_D+R_2 + g_m R_2 R_1}\n\\]\n\nSo the exact midband gain (with \\(r_o\\to\\infty\\)) is\n\n\\[\n\\boxed{A_v = -\\dfrac{g_m R_D R_1}\n               {R_1+R_D+R_2 + g_m R_2 R_1}}\n\\]\n\n---\n\n### 4. Important limiting cases\n\n1. **If \\(R_1\\to\\infty\\)** (no bridge resistor):  \n   The circuit reduces to a CS stage with source resistor \\(R_2\\),\n   \\[\n   A_v \\approx -\\frac{g_m R_D}{1 + g_m R_2}\n   \\]\n   (standard result for unbypassed source degeneration).\n\n2. **If loop gain is high, i.e. \\(g_m R_1 R_2 \\gg R_1 + R_2 + R_D\\):**\n   \\[\n   A_v \\approx -\\frac{R_D}{R_2}\n   \\]\n   The gain is then set mainly by resistors \\(R_D\\) and \\(R_2\\), almost\n   independent of transistor parameters—this is the effect of strong\n   negative feedback.\n\n---\n\n### 5. Feedback viewpoint\n\n- The output quantity is **voltage** \\(v_o\\), sampled by the shunt network \\(R_1\\)-\\(R_2\\).\n- The feedback signal is a voltage \\(v_F\\) applied in **series** with the input at the source (the controlling quantity is \\(v_{gs}=v_{in}-v_F\\)).\n\nThus this is a **voltage–series (series–shunt) feedback amplifier**: a MOS common‑source stage whose gain and bias are stabilized by resistive feedback.",
        "format": "markdown",
        "sha256": "44f5336caddbea16770915d0a732172564de7ab9c0eacdbd33ddb61dd8412f3f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer reverses the essential connections: the actual input is applied at M1’s source, while the R1–R2 divider feeds the gate. Its small-signal model and inverting gain therefore analyze a different circuit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 12385,
        "total_tokens": 13029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11314,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 12385,
        "total_tokens": 13029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11314,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let  \n\n- \\(v_{\\text{in}}\\) = small–signal gate voltage,  \n- \\(v_o\\) = \\(v_{\\text{out}}\\) = small–signal drain voltage,  \n- \\(v_F\\) = small–signal source voltage (labeled \\(V_F\\)),  \n- MOSFET \\(M_1\\) in saturation with transconductance \\(g_m\\) and (for simplicity) \\(r_o\\to\\infty\\).\n\n---\n\n### 1. Small‑signal equations\n\nWith \\(V_{DD}\\) ac‑grounded, the small‑signal circuit has:\n\n- \\(R_D\\) from \\(v_o\\) to ground.  \n- \\(R_1\\) from \\(v_o\\) to \\(v_F\\).  \n- \\(R_2\\) from \\(v_F\\) to ground.  \n- Controlled current source \\(g_m(v_{\\text{in}}-v_F)\\) from drain to source.\n\nWrite KCL at the drain (node \\(v_o\\)) and source (node \\(v_F\\)):\n\n\\[\n\\begin{aligned}\n\\text{Drain:}&\\qquad\n\\frac{v_o}{R_D}+\\frac{v_o-v_F}{R_1}\n+g_m\\bigl(v_{\\text{in}}-v_F\\bigr)=0 \\tag{1} \\\\\n\\text{Source:}&\\qquad\n\\frac{v_F}{R_2}+\\frac{v_F-v_o}{R_1}\n-g_m\\bigl(v_{\\text{in}}-v_F\\bigr)=0 \\tag{2}\n\\end{aligned}\n\\]\n\nAdding (1) and (2) eliminates the MOSFET term and \\(R_1\\):\n\n\\[\n\\frac{v_o}{R_D}+\\frac{v_F}{R_2}=0\n\\qquad\\Rightarrow\\qquad\nv_F = -\\frac{R_2}{R_D}\\,v_o \\tag{3}\n\\]\n\nThis relation between the feedback voltage and the output holds **independently of** \\(g_m\\) and \\(R_1\\).\n\n---\n\n### 2. Closed‑loop gain \\(A_v = v_o / v_{\\text{in}}\\)\n\nUse (3) in (1):\n\n\\[\n\\frac{v_o}{R_D}+\\frac{v_o-v_F}{R_1}\n+g_m\\bigl(v_{\\text{in}}-v_F\\bigr)=0\n\\]\n\nSubstitute \\(v_F = -\\dfrac{R_2}{R_D} v_o\\):\n\n\\[\n\\frac{v_o}{R_D}+\\frac{v_o + \\dfrac{R_2}{R_D}v_o}{R_1}\n+g_m\\Bigl(v_{\\text{in}}+\\dfrac{R_2}{R_D}v_o\\Bigr)=0\n\\]\n\nSolve for \\(v_o / v_{\\text{in}}\\):\n\n\\[\n\\boxed{\nA_v \\equiv \\frac{v_o}{v_{\\text{in}}}\n= -\\,\\frac{g_m R_D}\n       {1+\\dfrac{R_D+R_2}{R_1}+g_m R_2}\n}\n\\tag{4}\n\\]\n\nSo the stage is inverting.\n\n---\n\n### 3. Feedback action and useful approximations\n\nFrom (3) and (4) the gain from input to the feedback node is\n\n\\[\n\\frac{v_F}{v_{\\text{in}}}\n= \\frac{v_F}{v_o}\\frac{v_o}{v_{\\text{in}}}\n= \\left(-\\frac{R_2}{R_D}\\right)\n   \\left(-\\frac{g_m R_D}\n              {1+\\dfrac{R_D+R_2}{R_1}+g_m R_2}\\right)\n= \\frac{g_m R_2}\n       {1+\\dfrac{R_D+R_2}{R_1}+g_m R_2}\n\\tag{5}\n\\]\n\nIf the loop gain is large,\n\n\\[\ng_m R_2 \\gg 1 + \\frac{R_D+R_2}{R_1},\n\\]\n\nthen\n\n\\[\n\\boxed{\\;v_F \\approx v_{\\text{in}}\\;}\n\\]\n\nso the source node follows the input (the MOSFET acts as an error amplifier forcing\n\\(V_F \\simeq V_{\\text{in}}\\)).\n\nUsing \\(v_F \\approx v_{\\text{in}}\\) in (3):\n\n\\[\nv_{\\text{in}} \\approx v_F = -\\frac{R_2}{R_D} v_o\n\\quad\\Rightarrow\\quad\n\\boxed{\\;A_v \\approx -\\frac{R_D}{R_2}\\;}\n\\tag{6}\n\\]\n\nThus, for strong feedback the voltage gain is set almost entirely by the resistor\nratio \\(R_D/R_2\\), nearly independent of the MOSFET parameters and of \\(R_1\\).\n\n---\n\n### 4. Nature of the feedback\n\n- The output quantity is a voltage (\\(v_o\\)), sampled through resistors.\n- The feedback signal \\(v_F\\) is **series‑mixed** with the input at the source–gate pair (since \\(v_{gs}=v_{\\text{in}}-v_F\\)).\n\nThis is a **voltage–series (series–shunt) negative‑feedback amplifier** whose closed‑loop gain is determined mainly by resistor ratios, while the feedback forces \\(V_F\\) to track \\(V_{\\text{in}}\\).",
        "format": "markdown",
        "sha256": "3cf80e371f66ca33017b8824bbd2a825f44c4bc1501943173db6a81b5d1878ce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer reverses the circuit connections: the actual input is at the source and the output divider feeds the gate, not an input at the gate with feedback to the source. Its inverting gain and resistor-ratio result therefore analyze a different topology.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 21289,
        "total_tokens": 21933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20079,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 21289,
        "total_tokens": 21933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20079,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **source follower (common‑drain amplifier) biased by a current‑source NMOS (M₂).**\n\n---\n\n### 1. DC (large‑signal) analysis  \n\nAssume both transistors are nMOS and operate in saturation, and neglect channel‑length modulation (λ ≈ 0).\n\n**M₂ (current‑source load)**  \nGate at constant bias \\(V_b\\), source at ground:\n\n\\[\nI_D = I_{bias} \\approx \\frac{1}{2}k'_n\\frac{W_2}{L_2}(V_b - V_{th2})^2\n\\]\n\nas long as\n\n\\[\nV_{DS2} = V_{out} \\ge V_{GS2}-V_{th2}=V_b-V_{th2}\n\\]\n\n**M₁ (source follower)**  \nSame current flows through M₁:\n\n\\[\nI_D = \\frac{1}{2}k'_n\\frac{W_1}{L_1}(V_{GS1}-V_{th1})^2\n\\]\n\nThus,\n\n\\[\nV_{GS1} - V_{th1} = \\sqrt{\\frac{2 I_{bias}}{k'_n (W_1/L_1)}}\n\\equiv V_{OV1} \\quad (\\text{constant over small signal swings})\n\\]\n\nwith\n\n\\[\nV_{GS1}=V_{in}-V_{out}\n\\]\n\nHence DC relation between input and output:\n\n\\[\nV_{out} = V_{in} - (V_{th1}+V_{OV1})\n\\]\n\nSo \\(V_{out}\\) follows \\(V_{in}\\) with almost unit slope, shifted down roughly by a constant \\(V_{GS1}\\).\n\n**Region‑of‑operation limits**\n\n- For M₂ to stay in saturation:  \n  \\[\n  V_{out} \\ge V_b - V_{th2}\n  \\]\n\n- For M₁ to stay in saturation:  \n  \\[\n  V_{DS1} = V_{DD}-V_{out} \\ge V_{GS1}-V_{th1} = V_{OV1}\n  \\Rightarrow V_{out} \\le V_{DD}-V_{OV1}\n  \\]\n\n---\n\n### 2. Small‑signal gain, input and output resistance  \n\nTake \\(V_b\\) and \\(V_{DD}\\) as AC ground. Small‑signal parameters: \\(g_{m1}, g_{ds1}=1/r_{o1}\\) for M₁ and \\(g_{ds2}=1/r_{o2}\\) for M₂.  \nSince gate and source of M₂ are both at AC ground, \\(v_{gs2}=0\\) and its \\(g_{m2}\\) does **not** appear; M₂ contributes only \\(r_{o2}\\) to ground.\n\n**Node equation at \\(v_{out}\\):**\n\n\\[\n-g_{m1} v_{in} + (g_{m1}+g_{ds1}+g_{ds2}) v_{out} = 0\n\\]\n\nso\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}} =\n\\frac{g_{m1}}{g_{m1}+g_{ds1}+g_{ds2}}\n\\approx\n\\frac{g_{m1} R_L}{1+g_{m1} R_L}\n\\]\nwhere \\(R_L = r_{o1}\\parallel r_{o2}\\).\n\nFor a well‑designed bias current source \\(r_{o1}, r_{o2}\\) are large ⇒  \n\\(g_{ds1}+g_{ds2} \\ll g_{m1}\\) and\n\n\\[\nA_v \\approx 1\n\\]\n\nSo the circuit behaves as a **voltage buffer** (follower).\n\n**Input resistance**\n\nThe input is the gate of M₁:\n\n\\[\nR_{in} \\approx \\infty\n\\]\n(neglecting gate leakage and any driving‑source resistance).\n\n**Output resistance**\n\nSet \\(v_{in}=0\\) and apply a test voltage \\(v_x\\) at \\(v_{out}\\):\n\n\\[\ni_x = (g_{m1}+g_{ds1}+g_{ds2}) v_x\n\\Rightarrow\nR_{out} = \\frac{v_x}{i_x} =\n\\frac{1}{g_{m1}+g_{ds1}+g_{ds2}}\n\\approx \\frac{1}{g_{m1}}\n\\]\n\nSo the circuit presents **low output resistance**, suitable for buffering.\n\n---\n\n**Summary**\n\n- Topology: nMOS source follower (M₁) biased by nMOS current source (M₂).  \n- DC: \\(V_{out} \\approx V_{in} - V_{GS1}\\) with constant bias current set by \\(V_b\\).  \n- Small‑signal: \\(A_v \\lesssim 1\\), \\(R_{in} \\approx \\infty\\), \\(R_{out} \\approx 1/g_{m1}\\).  \n- Linear output swing is limited to  \n  \\(V_b - V_{th2} \\lesssim V_{out} \\lesssim V_{DD} - V_{OV1}\\).",
        "format": "markdown",
        "sha256": "1659ed470e4f3ab69b91569b887851ae6065fb93a23d618ba3df105113cba75e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as a source follower and M₂ as its current-source load, and gives a positive gain near unity. The omitted body-effect term is a minor refinement; the golden solution’s full-credit rule allows an idealized gain expression.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8633,
        "total_tokens": 9277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7503,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8633,
        "total_tokens": 9277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7503,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **source follower (common‑drain stage) biased with an NMOS current\nsource**.\n\nTransistors are nMOS; M1 is on top, M2 at the bottom.  \n\\(V_{in}\\) drives the gate of M1, \\(V_b\\) biases M2, and the output is the\nintermediate node.\n\n---\n\n### 1. DC / large‑signal operation (assuming saturation and no channel‑length modulation)\n\nFor an nMOS in saturation\n\n\\[\nI_D=\\frac{1}{2}\\beta (V_{GS}-V_{TH})^{2},\\qquad \n\\beta=\\mu_n C_{ox} \\frac{W}{L}\n\\]\n\nLet \\(\\beta_1,\\beta_2\\) be for M1 and M2.\n\n**M2 (current‑source transistor)**  \nGate at \\(V_b\\), source at ground:\n\n\\[\nI_D = I_2\n =\\frac{1}{2}\\beta_2 (V_b-V_{TH})^2\n\\]\nif \\(V_b>V_{TH}\\) and \\(V_{out}\\ge V_b-V_{TH}\\) (saturation condition).\n\nThus M2 provides an (approximately) constant current, set by \\(V_b\\).\n\n**M1 (source follower)**  \nGate at \\(V_{in}\\), source at \\(V_{out}\\), drain at \\(V_{DD}\\):\n\n\\[\nI_D = I_1\n =\\frac{1}{2}\\beta_1 (V_{in}-V_{out}-V_{TH})^{2}\n\\]\n\nIn steady state the series devices carry the same current:\n\n\\[\nI_1 = I_2\n\\]\n\n\\[\n\\frac{1}{2}\\beta_1 (V_{in}-V_{out}-V_{TH})^{2}\n   =\\frac{1}{2}\\beta_2 (V_b-V_{TH})^2\n\\]\n\n\\[\nV_{in}-V_{out}-V_{TH}\n   =\\sqrt{\\frac{\\beta_2}{\\beta_1}}(V_b-V_{TH})\n\\]\n\nSo\n\n\\[\n\\boxed{V_{out} = V_{in}\n        -\\left[V_{TH}+\\sqrt{\\frac{\\beta_2}{\\beta_1}}(V_b-V_{TH})\\right]}\n\\]\n\nThe bracketed term is a constant for fixed \\(V_b\\), \\(\\beta_1,\\beta_2\\).  \nTherefore \\(V_{out}\\) is simply a **level‑shifted version of \\(V_{in}\\) with\nslope 1**:\n\n\\[\n\\frac{dV_{out}}{dV_{in}} = 1\n\\]\n\n(The level shift equals the gate‑source voltage of M1, determined by the bias\ncurrent from M2.)\n\n---\n\n### 2. Operating‑region constraints\n\nTo have both devices ON and saturated:\n\n- M1 on: \\(V_{GS1}=V_{in}-V_{out} > V_{TH}\\Rightarrow V_{out}<V_{in}-V_{TH}\\).\n- M1 saturated:\n  \\(V_{DS1}=V_{DD}-V_{out} \\ge V_{GS1}-V_{TH}\\Rightarrow V_{in}\\le V_{DD}+V_{TH}\\)\n  (always true in normal operation where \\(V_{in}\\le V_{DD}\\)).\n- M2 on: \\(V_b>V_{TH}\\).\n- M2 saturated: \\(V_{out}\\ge V_b-V_{TH}\\).\n\nSo the useful output range is\n\n\\[\nV_b - V_{TH}\\; \\lesssim \\; V_{out} \\; \\lesssim \\; V_{in}-V_{TH}\n\\]\n\n---\n\n### 3. Small‑signal gain\n\nIgnoring channel‑length modulation (\\(r_{o1},r_{o2}\\rightarrow\\infty\\)):\n\n- M2’s current is fixed → its small‑signal current is zero.\n- For M1: \\(i_d = g_{m1}(v_{in}-v_{out})\\).\n\nKCL at the output node: \\(i_d=0\\Rightarrow g_{m1}(v_{in}-v_{out})=0\\).\n\nThus\n\n\\[\n\\boxed{A_v=\\dfrac{v_{out}}{v_{in}}=1}\n\\]\n\nWith finite output resistances, the gain becomes slightly less than 1:\n\n\\[\nA_v \\approx \\frac{g_{m1}(r_{o1}\\parallel r_{o2})}\n                 {1+g_{m1}(r_{o1}\\parallel r_{o2})}\n\\]\nwhich is close to unity if \\(g_{m1}(r_{o1}\\parallel r_{o2})\\gg 1\\).\n\n---\n\n### 4. Key points\n\n- M2, biased by \\(V_b\\), sets a nearly constant current.\n- That current fixes \\(V_{GS1}\\); hence \\(V_{out}=V_{in}-V_{GS1}\\approx V_{in}-\\text{const}\\).\n- The circuit behaves as a **unity‑gain buffer / source follower that provides a\nDC level shift**, with high input resistance (MOS gate) and low output\nresistance (\\(\\approx 1/g_{m1}\\) for a well‑biased device).",
        "format": "markdown",
        "sha256": "8d088dabe300d075111e25798fe8740fda17761329171058b4d89a7fd7b940b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current-source load, with the output at the source node and a positive, near-unity gain. The simplified gain expression omits body effect, but that is an allowed approximation under the full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 7554,
        "total_tokens": 8198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6403,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 7554,
        "total_tokens": 8198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6403,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume the top device **M1** is a p‑MOS transistor connected to \\(V_{DD}\\) and the bottom device **M2** is an n‑MOS transistor connected to ground, with \\(V_b\\) a dc bias voltage.  \n\\(V_{DD}\\) and \\(V_b\\) are pure dc; only \\(V_{in}\\) is signal‑bearing.\n\n---\n\n## 1. DC / region of operation\n\nNode voltages\n\n- \\(V_S1 = V_{DD}\\), \\(V_D1 = V_{out}\\), \\(V_G1 = V_{in}\\)\n- \\(V_S2 = 0\\), \\(V_D2 = V_{out}\\), \\(V_G2 = V_b\\)\n\nFor saturation:\n\n\\[\n\\begin{aligned}\n\\text{M1 (pMOS):}&\\quad\n  V_{SG1} > |V_{TP}|,\\;\n  V_{SD1} \\ge V_{SG1}-|V_{TP}| \\\\\n& V_{SG1}=V_{DD}-V_{in},\\;V_{SD1}=V_{DD}-V_{out} \\\\\n&\\Rightarrow V_{in}<V_{DD}-|V_{TP}|,\\quad\n   V_{out} \\le V_{in}+|V_{TP}| \\\\[4pt]\n\\text{M2 (nMOS):}&\\quad\n  V_{GS2} > V_{TN},\\;\n  V_{DS2} \\ge V_{GS2}-V_{TN} \\\\\n& V_{GS2}=V_b,\\;V_{DS2}=V_{out} \\\\\n&\\Rightarrow V_b>V_{TN},\\quad\n   V_{out} \\ge V_b-V_{TN}\n\\end{aligned}\n\\]\n\nThus both transistors are in saturation if\n\n\\[\nV_b-V_{TN} \\;<\\; V_{out} \\;<\\; V_{in}+|V_{TP}|\n\\]\n\nwith \\(V_{in}<V_{DD}-|V_{TP}|\\) and \\(V_b>V_{TN}\\).\n\nWhen both are in saturation, their drain currents are\n\n\\[\n\\begin{aligned}\nI_{D1} &\\approx \\frac{k_p}{2}(V_{DD}-V_{in}-|V_{TP}|)^2(1+\\lambda_p(V_{DD}-V_{out})) \\\\\nI_{D2} &\\approx \\frac{k_n}{2}(V_b-V_{TN})^2(1+\\lambda_n V_{out})\n\\end{aligned}\n\\]\n\nand at dc \\(I_{D1}=I_{D2}\\). This equation sets the quiescent current and \\(V_{out}\\) for given \\(V_{in}\\) and \\(V_b\\).\n\nIntuitively:\n\n- \\(M_2\\) (gate fixed at \\(V_b\\)) behaves as a nearly constant current sink.\n- \\(M_1\\) provides a current from \\(V_{DD}\\) that depends on \\(V_{in}\\).\n- As \\(V_{in}\\) increases, \\(M_1\\) turns **off**, its current decreases, so \\(M_2\\) wins and pulls \\(V_{out}\\) **down**: the stage is inverting.\n\n---\n\n## 2. Small‑signal (incremental) behavior\n\nTake small‑signal variations \\(v_{in}\\) and \\(v_{out}\\) around the bias point.  \n\\(V_{DD}\\) and \\(V_b\\) have no small‑signal components, so the small‑signal gates are:\n\n- \\(v_{g1} = v_{in}\\)\n- \\(v_{g2} = 0\\)\n\nThe small‑signal model:\n\n- For M1 (pMOS): transconductance \\(g_{m1}\\), output resistance \\(r_{o1}\\)\n- For M2 (nMOS): transconductance \\(g_{m2}\\), output resistance \\(r_{o2}\\)\n\nSince the gate of M2 is ac‑grounded, \\(v_{gs2}=0\\) and its \\(g_{m2}\\) source is inactive; M2 contributes only \\(r_{o2}\\).\n\nAt node \\(v_{out}\\) (with \\(V_{DD}\\) and ground as ac grounds), KCL gives\n\n\\[\ng_{m1} v_{in} + \\frac{v_{out}}{r_{o1}} + \\frac{v_{out}}{r_{o2}} = 0\n\\]\n\nso the small‑signal voltage gain is\n\n\\[\n\\boxed{\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n   = -\\,g_{m1}\\,(r_{o1} \\parallel r_{o2})\n}\n\\]\n\nHence:\n\n- The stage is **inverting** (\\(A_v<0\\)).\n- Input resistance \\(R_{in} \\approx \\infty\\) (MOS gate).\n- Output resistance \\(R_{out} = r_{o1} \\parallel r_{o2}\\).\n\nIf \\(r_{o1} \\gg r_{o2}\\) (common in practice), then approximately\n\n\\[\nA_v \\approx -g_{m1} r_{o2}, \\qquad R_{out} \\approx r_{o2}.\n\\]\n\n---\n\nSo the circuit is a **single‑ended inverting amplifier**: a p‑MOS common‑source device (M1) loaded by an n‑MOS transistor (M2) biased as a current sink.",
        "format": "markdown",
        "sha256": "1c97c3e08d11c87de7e234c7274980fbd7b6fec809485e696bbd184e8e411fe0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a pMOS common-source stage and gives an inverting gain. M1 is an NMOS source follower with its output at the source, so the gain is positive and at or slightly below unity; the golden solution explicitly assigns 0 to this topology error.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 11441,
        "total_tokens": 12085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 11441,
        "total_tokens": 12085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a CMOS inverter.\n\n- **M1** is an nMOS with source at ground.  \n- **M2** is a pMOS with source at \\(V_{DD}\\).  \n- Their **gates are tied together** to form the input \\(V_{in}\\).  \n- Their **drains are tied together** to form the output \\(V_{out}\\).\n\n---\n\n### Logic behavior (DC operation)\n\n1. **\\(V_{in}=0\\) (logic 0)**\n   - M1 (nMOS): \\(V_{GS1}=0 < V_{tn}\\) → **OFF**.\n   - M2 (pMOS): \\(V_{SG2}=V_{DD} > |V_{tp}|\\) → **ON**.\n   - With M1 off there is no path to ground; M2 pulls the output up:\n     \\[\n     V_{out} \\approx V_{DD} \\quad (\\text{logic 1})\n     \\]\n   - DC current from \\(V_{DD}\\) to ground is essentially zero.\n\n2. **\\(V_{in}=V_{DD}\\) (logic 1)**\n   - M1: \\(V_{GS1}=V_{DD} > V_{tn}\\) → **ON**.\n   - M2: \\(V_{SG2}=0 < |V_{tp}|\\) → **OFF**.\n   - With M2 off there is no path to \\(V_{DD}\\); M1 pulls the output down:\n     \\[\n     V_{out} \\approx 0 \\quad (\\text{logic 0})\n     \\]\n   - Again, essentially no DC current flows.\n\nThus\n\\[\nV_{out} = \\overline{V_{in}}\n\\]\nand the circuit is a **complementary MOS inverter with (ideally) zero static power dissipation**.\n\n---\n\n### Switching region (qualitative)\n\nFor intermediate \\(V_{in}\\) both transistors conduct simultaneously; the output moves from \\(V_{DD}\\) toward 0. Around the switching point both devices are typically in saturation, and the currents satisfy\n\n\\[\n\\frac{1}{2}\\beta_n(V_{in}-V_{tn})^{2}\n=\n\\frac{1}{2}\\beta_p(V_{DD}-V_{in}-|V_{tp}|)^{2}\n\\]\n\nLet\n\\[\nr = \\sqrt{\\frac{\\beta_p}{\\beta_n}}\n\\]\nThen the input voltage at which the inverter switches (approximately where \\(V_{out}\\approx V_{in}\\)) is\n\n\\[\nV_M = \\frac{r\\,(V_{DD}-|V_{tp}|)+V_{tn}}{1+r}\n\\]\n\nIf \\(\\beta_n \\approx \\beta_p\\) and \\(|V_{tp}| \\approx V_{tn}\\), then \\(V_M \\approx V_{DD}/2\\), giving nearly symmetric noise margins.\n\n---\n\n**Summary:**  \nThe circuit is a CMOS inverter. One device is off for each DC input level, so static current is (ideally) zero; the output is the logical complement of the input, with a switching threshold near mid‑supply when the pMOS and nMOS are properly sized.",
        "format": "markdown",
        "sha256": "3d7ea9c18ab58c294d21dd24e837befe900b798bcf82806ce34762fdd234ea18"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and accurately describes its logic behavior. The optional switching-point analysis is also consistent with the stated assumptions.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 5637,
        "total_tokens": 6001,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4951,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 5637,
        "total_tokens": 6001,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4951,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is the basic CMOS inverter.\n\n- **M1**: NMOS with source at ground  \n- **M2**: PMOS with source at \\(V_{DD}\\)  \n- Gates of both devices are tied to \\(V_{in}\\); their drains are tied together to form \\(V_{out}\\).\n\n---\n\n### DC operation\n\nUse thresholds \\(V_{tn}>0\\) (NMOS) and \\(|V_{tp}|>0\\) (PMOS).\n\n1. **\\(V_{in}=0\\)**  \n   - NMOS: \\(V_{GS1}=0<V_{tn}\\) → OFF  \n   - PMOS: \\(V_{SG2}=V_{DD}>|V_{tp}|\\) → ON  \n   - No path to ground; \\(V_{out}\\rightarrow V_{DD}\\).  \n   ⇒ Logic 0 in → logic 1 out.\n\n2. **\\(V_{in}=V_{DD}\\)**  \n   - NMOS: \\(V_{GS1}=V_{DD}>V_{tn}\\) → ON  \n   - PMOS: \\(V_{SG2}=0<|V_{tp}|\\) → OFF  \n   - Output pulled to ground: \\(V_{out}\\rightarrow 0\\).  \n   ⇒ Logic 1 in → logic 0 out.\n\n3. **Intermediate \\(V_{in}\\)**  \n   Both transistors conduct, forming a voltage‑controlled divider between \\(V_{DD}\\) and ground.  \n   Around the switching point the gain \\(\\frac{dV_{out}}{dV_{in}}\\) is large and negative, so a small change in \\(V_{in}\\) causes a large change in \\(V_{out}\\).\n\n---\n\n### Switching threshold (approximate)\n\nNear the switching point both devices are in saturation, so\n\n\\[\nI_{Dn}=\\frac{1}{2}k_n(V_{in}-V_{tn})^2,\\qquad\nI_{Dp}=\\frac{1}{2}k_p(V_{DD}-V_{in}-|V_{tp}|)^2\n\\]\n\nSetting \\(|I_{Dp}|=I_{Dn}\\) gives the input voltage at which the inverter changes state, \\(V_M\\):\n\n\\[\nV_M = \n\\frac{V_{tn}+\\sqrt{\\frac{k_p}{k_n}}\\,(V_{DD}-|V_{tp}|)}\n     {1+\\sqrt{\\frac{k_p}{k_n}}}\n\\]\n\nIf \\(k_n\\approx k_p\\) and \\(V_{tn}\\approx |V_{tp}|\\), then \\(V_M\\approx V_{DD}/2\\).\n\n---\n\n**Summary:** The circuit is a CMOS inverter. For a low input only the PMOS conducts and the output is high; for a high input only the NMOS conducts and the output is low; intermediate inputs turn both on, giving a sharp transition around \\(V_M\\) with negligible static power dissipation when the input is at either logic level.",
        "format": "markdown",
        "sha256": "e6b019d30c5bf8da6d2bd33b894ae96bc3f4fd54dc309fee7784951f893185cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up, and describes the complementary input/output behavior. The additional switching-threshold analysis is consistent and does not contradict inverter operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 4549,
        "total_tokens": 4913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3914,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 4549,
        "total_tokens": 4913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3914,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** built from a p‑MOSFET (M₂) and an n‑MOSFET (M₁).\n\n- M₂ (pMOS): source at \\(V_{DD}\\), drain at \\(V_{out}\\), gate at \\(V_{in}\\).\n- M₁ (nMOS): source at 0 V (ground), drain at \\(V_{out}\\), gate at \\(V_{in}\\).\n\nBoth gates are tied to the same input, so the two transistors are driven in a complementary way.\n\n---\n\n### DC operation\n\nLet the thresholds be \\(V_{tn} > 0\\) (nMOS) and \\(V_{tp} < 0\\) (pMOS).\n\n1. **Low input (\\(V_{in} \\approx 0\\))**\n\n   - nMOS: \\(V_{GS1} = 0 < V_{tn}\\) → **OFF**\n   - pMOS: \\(V_{SG2} = V_{DD} > |V_{tp}|\\) → **ON**\n\n   The output node is pulled up through M₂ to \\(V_{DD}\\):\n\n   \\[\n   V_{out} \\approx V_{DD} \\quad (\\text{logic ‘1’})\n   \\]\n\n2. **High input (\\(V_{in} \\approx V_{DD}\\))**\n\n   - nMOS: \\(V_{GS1} = V_{DD} > V_{tn}\\) → **ON**\n   - pMOS: \\(V_{SG2} = 0 < |V_{tp}|\\) → **OFF**\n\n   The output node is pulled down through M₁ to ground:\n\n   \\[\n   V_{out} \\approx 0 \\quad (\\text{logic ‘0’})\n   \\]\n\n3. **Intermediate input (around switching threshold)**\n\n   Both transistors are partially ON, and the output voltage is set where the nMOS and pMOS drain currents are equal:\n\n   \\[\n   I_{Dn}(V_{in},V_{out}) = I_{Dp}(V_{in},V_{out})\n   \\]\n\n   For a symmetric design (\\(\\beta_n \\approx \\beta_p\\)), this gives a switching point near \\(V_{in} \\approx V_{DD}/2\\). In this region there is a direct current path from \\(V_{DD}\\) to ground and thus dynamic power dissipation.\n\n---\n\n### Key properties\n\n- **Logic function:** inverts the input; \\(V_{out} \\approx V_{DD}\\) for logic 0 input, \\(V_{out} \\approx 0\\) for logic 1 input.\n- **Static power consumption:** ideally zero, since in steady logic states one transistor is OFF, so no DC path from \\(V_{DD}\\) to ground.\n- **High input impedance:** gates draw negligible DC current.\n- **Noise margins:** large, because the transfer curve is steep and the switching point can be set near mid‑supply.",
        "format": "markdown",
        "sha256": "6af764d07fc63cf1d2b63bbac8c1246bc07c2788f7688b602c6c6aa89085ff40"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and accurately describes its logic-level operation. The optional analysis does not contradict the inverter’s operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 2187,
        "total_tokens": 2551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1551,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 2187,
        "total_tokens": 2551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1551,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the usual CMOS convention (the device near \\(V_{DD}\\) is a p‑MOS and the one near ground is an n‑MOS), the circuit is a **CMOS inverter**.\n\n---\n\n### Structure\n\n- \\(M_1\\): p‑MOS  \n  - Source at \\(V_{DD}\\)  \n  - Drain at \\(V_\\text{out}\\)  \n  - Gate at \\(V_\\text{in}\\)\n\n- \\(M_2\\): n‑MOS  \n  - Source at ground  \n  - Drain at \\(V_\\text{out}\\)  \n  - Gate at \\(V_\\text{in}\\)\n\nThe drains of \\(M_1\\) and \\(M_2\\) are tied together to form the output.\n\n---\n\n### Operation\n\n1. **\\(V_\\text{in} \\approx 0\\) (logic 0)**  \n   - \\(M_2\\) (n‑MOS): \\(V_{GSn} \\approx 0 < V_{tn}\\) → **OFF**  \n   - \\(M_1\\) (p‑MOS): \\(V_{SGp} = V_{DD} - 0 > |V_{tp}|\\) → **ON**  \n   - \\(V_\\text{out}\\) is pulled up to \\(V_{DD}\\) (logic 1).  \n   - No direct DC path from \\(V_{DD}\\) to ground → essentially **zero static power**.\n\n2. **\\(V_\\text{in} \\approx V_{DD}\\) (logic 1)**  \n   - \\(M_2\\): \\(V_{GSn} = V_{DD} > V_{tn}\\) → **ON**  \n   - \\(M_1\\): \\(V_{SGp} = V_{DD} - V_{DD} = 0 < |V_{tp}|\\) → **OFF**  \n   - \\(V_\\text{out}\\) is pulled down to 0 (logic 0).  \n   - Again, no DC path from \\(V_{DD}\\) to ground → zero static power.\n\n3. **Intermediate \\(V_\\text{in}\\)**  \n   - Both transistors conduct simultaneously.  \n   - \\(V_\\text{out}\\) moves smoothly from \\(V_{DD}\\) to 0 as \\(V_\\text{in}\\) increases.  \n   - During this transition there is a momentary **short‑circuit current** from \\(V_{DD}\\) to ground.\n\nThe logic function is therefore an **inversion**:\n\n\\[\n\\begin{array}{c|c}\nV_\\text{in} & V_\\text{out} \\\\\n\\hline\n0 & 1 \\\\\n1 & 0\n\\end{array}\n\\]\n\n---\n\n### Switching Threshold (optional analytic result)\n\nNeglecting body effect and channel‑length modulation, and assuming both devices are in saturation at the switching point \\(V_M\\),\n\n\\[\n\\beta_n (V_M - V_{tn})^2 = \\beta_p (V_{DD} - V_M - |V_{tp}|)^2\n\\]\n\nwith \\(\\beta_n = k_n'(W/L)_n,\\; \\beta_p = k_p'(W/L)_p\\).\n\nSolving for \\(V_M\\):\n\n\\[\nV_M = \n\\frac{\\sqrt{\\beta_p}(V_{DD}-|V_{tp}|) + \\sqrt{\\beta_n} V_{tn}}\n{\\sqrt{\\beta_n} + \\sqrt{\\beta_p}}\n\\]\n\nIf \\(\\beta_n \\approx \\beta_p\\) and \\(V_{tn} \\approx |V_{tp}|\\), then \\(V_M \\approx V_{DD}/2\\).\n\n---\n\nSo, the circuit is a CMOS inverter providing rail‑to‑rail output, high noise margins, and essentially zero static power dissipation.",
        "format": "markdown",
        "sha256": "d2b837f65c321cc540b8ee69e37133c0947744e53f155197ddbe949472dc3835"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as an ordinary CMOS inverter; the golden solution requires recognizing both devices as NMOS.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 7315,
        "total_tokens": 7679,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6494,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 7315,
        "total_tokens": 7679,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6494,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a CMOS inverter:  \n- \\(M_1\\) is a p‑MOSFET (source at \\(V_{DD}\\)),  \n- \\(M_2\\) is an n‑MOSFET (source at ground),  \n- their drains are tied together to form \\(V_{out}\\), and their gates are tied and driven by \\(V_{in}\\).\n\n---\n\n### Operation regions\n\nLet \\(V_{tn}>0\\) and \\(|V_{tp}|>0\\) be the thresholds; \\(\\beta_n=k'_n(W/L)_n,\\; \\beta_p=k'_p(W/L)_p\\).\n\n1. **Low input: \\(0 \\le V_{in} < V_{tn}\\)**  \n   - \\(M_2\\) (nMOS): off.  \n   - \\(M_1\\) (pMOS): on because \\(V_{SG1}=V_{DD}-V_{in}>|V_{tp}|\\).  \n   - No dc path from \\(V_{DD}\\) to ground.  \n   - \\(V_{out} \\approx V_{DD}\\) (logic ‘1’).\n\n2. **High input: \\(V_{in} > V_{DD}-|V_{tp}|\\)**  \n   - \\(M_1\\) (pMOS): off.  \n   - \\(M_2\\) (nMOS): on because \\(V_{GS2}=V_{in}>V_{tn}\\).  \n   - \\(V_{out} \\approx 0\\) (logic ‘0’).  \n   - Again, essentially zero dc current.\n\n3. **Intermediate input: \\(V_{tn} < V_{in} < V_{DD}-|V_{tp}|\\)**  \n   - Both transistors conduct; there is a current from \\(V_{DD}\\) to ground.  \n   - \\(V_{out}\\) is somewhere between 0 and \\(V_{DD}\\) and is found by equating the nMOS and pMOS drain currents (one in saturation, the other possibly in triode, depending on the exact \\(V_{in}\\)–\\(V_{out}\\) point).  \n   - This region provides the large voltage gain of the inverter.\n\n---\n\n### Switching threshold \\(V_M\\)\n\nDefine \\(V_M\\) as the input at which \\(V_{out}=V_{in}\\). At this point both devices are in saturation and their drain currents are equal:\n\n\\[\n\\frac{1}{2}\\beta_n(V_M - V_{tn})^2\n=\n\\frac{1}{2}\\beta_p(V_{DD} - V_M - |V_{tp}|)^2\n\\]\n\nLet \\(r=\\sqrt{\\beta_p/\\beta_n}\\). Solving for \\(V_M\\):\n\n\\[\nV_M = \\frac{r\\,(V_{DD}-|V_{tp}|) + V_{tn}}{1+r}\n\\]\n\nIf the inverter is made “symmetrical” so that \\(\\beta_n=\\beta_p\\) and \\(V_{tn}=|V_{tp}|\\), then \\(r=1\\) and\n\n\\[\nV_M = \\frac{V_{DD}}{2}\n\\]\n\n---\n\n### Main conclusions\n\n- The circuit is a CMOS inverter: it outputs logic ‘1’ for a logic ‘0’ input and vice versa.\n- There is (ideally) no static power consumption because at steady logic levels one of the transistors is always off.\n- Large gain and rail‑to‑rail output swing give good noise margins.",
        "format": "markdown",
        "sha256": "c6a91242bbd3934f00a02c212167f36c9cdf29e9d48a02dbbd10f53435d0518e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as pMOS and analyzes the circuit as an ordinary CMOS inverter. Both devices are NMOS, so the device-identification gate requires a score of 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 4078,
        "total_tokens": 4442,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3325,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 4078,
        "total_tokens": 4442,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3325,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a standard **CMOS inverter** made of a p‑MOSFET (M1) as the pull‑up device and an n‑MOSFET (M2) as the pull‑down device.  \nThe gates are tied together to \\(V_{in}\\); the drains are tied together at \\(V_{out}\\); M1’s source is at \\(V_{DD}\\) and M2’s source is at ground.\n\n---\n\n### Logic‑level operation\n\n1. **\\(V_{in} \\approx 0\\) (logic 0)**  \n   - M2 (nMOS): \\(V_{GS,n} = V_{in} < V_{TN}\\) → OFF.  \n   - M1 (pMOS): \\(V_{SG,p} = V_{DD}-V_{in} > |V_{TP}|\\) → ON.  \n   - No path to ground; node is pulled up through M1.  \n   - **\\(V_{out} \\approx V_{DD}\\)** (logic 1).\n\n2. **\\(V_{in} \\approx V_{DD}\\) (logic 1)**  \n   - M2: \\(V_{GS,n} = V_{DD} > V_{TN}\\) → ON.  \n   - M1: \\(V_{SG,p} = V_{DD}-V_{DD}=0 < |V_{TP}|\\) → OFF.  \n   - No path to \\(V_{DD}\\); node is pulled down through M2.  \n   - **\\(V_{out} \\approx 0\\)** (logic 0).\n\nSo the circuit inverts the input logic level.\n\n---\n\n### Intermediate inputs / transfer characteristic\n\nFor \\(V_{in}\\) between 0 and \\(V_{DD}\\) both transistors can conduct; \\(V_{out}\\) is found from the DC condition\n\n\\[\nI_{Dn}(V_{in},V_{out}) = I_{Dp}(V_{in},V_{out})\n\\]\n\nusing the MOSFET I–V equations (neglecting channel‑length modulation):\n\n- nMOS (source at 0, drain at \\(V_{out}\\), gate at \\(V_{in}\\))  \n  \\[\n  I_{Dn} =\n  \\begin{cases}\n  0 & V_{in} < V_{TN} \\\\\n  \\tfrac{1}{2}\\beta_n (V_{in}-V_{TN})^2 & \\text{saturation} \\\\\n  \\beta_n[(V_{in}-V_{TN})V_{out} - \\tfrac{1}{2}V_{out}^2] & \\text{triode}\n  \\end{cases}\n  \\]\n\n- pMOS (source at \\(V_{DD}\\), drain at \\(V_{out}\\), gate at \\(V_{in}\\))  \n  \\[\n  I_{Dp} =\n  \\begin{cases}\n  0 & V_{DD}-V_{in} < |V_{TP}| \\\\\n  \\tfrac{1}{2}\\beta_p (V_{DD}-V_{in}-|V_{TP}|)^2 & \\text{saturation} \\\\\n  \\beta_p[(V_{DD}-V_{in}-|V_{TP}|)(V_{DD}-V_{out})-\\tfrac{1}{2}(V_{DD}-V_{out})^2]\n  & \\text{triode}\n  \\end{cases}\n  \\]\n\nPiecewise, these equations give the DC voltage transfer curve \\(V_{out}(V_{in})\\).\n\n---\n\n### Switching threshold\n\nNear the switching point both devices are typically in saturation. Setting their saturation currents equal:\n\n\\[\n\\frac{1}{2}\\beta_n (V_M - V_{TN})^2\n  = \\frac{1}{2}\\beta_p (V_{DD} - V_M - |V_{TP}|)^2\n\\]\n\nLet \\(\\gamma = \\sqrt{\\beta_p / \\beta_n}\\). Then the **switching threshold** \\(V_M\\) is\n\n\\[\nV_M = \\frac{\\gamma (V_{DD} - |V_{TP}|) + V_{TN}}{1+\\gamma}\n\\]\n\nIf device sizes are chosen so that \\(\\gamma\\) satisfies this with \\(V_M \\approx V_{DD}/2\\), the inverter has nearly symmetric noise margins.\n\n---\n\nSummary: the circuit is a CMOS inverter – it outputs \\(V_{DD}\\) for a low input, 0 for a high input, draws almost no static current in either logic state, and has a steep transfer characteristic around its switching threshold.",
        "format": "markdown",
        "sha256": "830d1d75f977bc59106c941b75f750aafeec5e8ff92ebf7807d5a94fbf2e83c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as a pMOS and analyzes the circuit as an ordinary CMOS inverter; the golden solution requires recognizing both devices as NMOS.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 7289,
        "total_tokens": 7653,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6303,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 364,
        "output_tokens": 7289,
        "total_tokens": 7653,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6303,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common‑source NMOS stage with a diode‑connected PMOS load**.\n\n- \\(M_1\\): nMOS, source at ground, gate driven by \\(V_{in}\\), drain at \\(V_{out}\\).\n- \\(M_2\\): pMOS, source at \\(V_{DD}\\), gate and drain shorted to \\(V_{out}\\) (diode‑connected).\n\nSo the node \\(V_{out}\\) is the drain of \\(M_1\\) and the gate/drain of \\(M_2\\).\n\n---\n\n### 1. DC operation (assuming both devices in saturation, \\(\\lambda \\approx 0\\))\n\nLet\n\n\\[\n\\beta_n = \\mu_n C_{ox}\\frac{W}{L}_1 ,\\qquad\n\\beta_p = \\mu_p C_{ox}\\frac{W}{L}_2 \\quad (>0)\n\\]\n\\[\nV_{tn},\\; V_{tp} \\;(V_{tp}<0) \\text{ thresholds}\n\\]\n\n**Currents in saturation**\n\nFor \\(M_1\\) (nMOS, source at 0):\n\n\\[\nI_{D1} = \\frac{\\beta_n}{2}(V_{in}-V_{tn})^2,\n\\quad\nV_{out} \\ge V_{in}-V_{tn}\n\\]\n\nFor \\(M_2\\) (pMOS diode‑connected, \\(V_{S2}=V_{DD}\\), \\(V_{G2}=V_{D2}=V_{out}\\)):\n\n\\[\nV_{SG2}=V_{DD}-V_{out},\\quad\nI_{D2} = \\frac{\\beta_p}{2}(V_{DD}-V_{out}-|V_{tp}|)^2,\n\\quad\nV_{DD}-V_{out} \\ge |V_{tp}|\n\\]\n\nKCL at \\(V_{out}\\) gives \\(I_{D1} = I_{D2}\\):\n\n\\[\n\\frac{\\beta_n}{2}(V_{in}-V_{tn})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{out}-|V_{tp}|)^2\n\\]\n\n\\[\n\\Rightarrow V_{DD}-V_{out}-|V_{tp}|\n= \\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,(V_{in}-V_{tn})\n\\]\n\n\\[\n\\boxed{V_{out}\n= V_{DD}-|V_{tp}|-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,(V_{in}-V_{tn})}\n\\]\n\nThis linear relation is valid as long as:\n\n\\[\n\\begin{cases}\nV_{in} > V_{tn} & (M_1\\ \\text{on})\\\\[2mm]\nV_{DD}-V_{out} > |V_{tp}| & (M_2\\ \\text{on})\\\\[2mm]\nV_{out} \\ge V_{in}-V_{tn} & (M_1\\ \\text{still in saturation})\n\\end{cases}\n\\]\n\nFor \\(V_{in} < V_{tn}\\): \\(M_1\\) is off, \\(M_2\\) is (almost) off, and the output sits near \\(V_{DD}\\).\n\nFor sufficiently large \\(V_{in}\\), the condition \\(V_{out} \\ge V_{in}-V_{tn}\\) breaks and \\(M_1\\) enters the triode region; the exact \\(V_{out}(V_{in})\\) then must be found from the triode equation.\n\n---\n\n### 2. Small‑signal gain (about a bias point where both devices are in saturation)\n\nIgnoring channel‑length modulation:\n\n\\[\ng_{m1} = \\beta_n(V_{in}-V_{tn}), \\qquad\ng_{m2} = \\beta_p(V_{DD}-V_{out}-|V_{tp}|)\n\\]\n\nFrom the DC equality above:\n\n\\[\nV_{DD}-V_{out}-|V_{tp}|=\\sqrt{\\frac{\\beta_n}{\\beta_p}}(V_{in}-V_{tn})\n\\]\n\nso\n\n\\[\ng_{m2}\n= \\beta_p \\sqrt{\\frac{\\beta_n}{\\beta_p}}(V_{in}-V_{tn})\n= \\sqrt{\\beta_n\\beta_p}(V_{in}-V_{tn})\n\\]\n\n\\[\n\\Rightarrow \\frac{g_{m1}}{g_{m2}}\n= \\frac{\\beta_n}{\\sqrt{\\beta_n\\beta_p}}\n= \\sqrt{\\frac{\\beta_n}{\\beta_p}}\n\\]\n\nFor AC, the diode‑connected \\(M_2\\) behaves like a resistor \\(1/g_{m2}\\) to AC ground (since \\(V_{DD}\\) is AC ground). With \\(M_1\\) as a common‑source device driving this load, the small‑signal gain is\n\n\\[\n\\boxed{A_v = \\frac{v_{out}}{v_{in}}\n\\approx -\\frac{g_{m1}}{g_{m2}}\n= -\\sqrt{\\frac{\\beta_n}{\\beta_p}}}\n\\]\n\n(if \\(r_{o1},r_{o2}\\) are large; including them gives\n\\(A_v \\approx -g_{m1}(r_{o1}\\parallel 1/(g_{m2}+g_{ds2}))\\)).\n\n---\n\n### 3. Qualitative behavior\n\n- For small \\(V_{in}\\) (< \\(V_{tn}\\)): \\(M_1\\) off, output high near \\(V_{DD}\\).\n- As \\(V_{in}\\) increases above \\(V_{tn}\\): \\(M_1\\) conducts, pulling \\(V_{out}\\) down; this also turns on the diode‑connected \\(M_2\\), creating a current path from \\(V_{DD}\\) to ground. \\(V_{out}\\) then follows the linear relation above.\n- For very large \\(V_{in}\\): \\(M_1\\) goes into triode, and \\(V_{out}\\) is limited near \\(V_{in}-V_{tn}\\).\n\nSo the circuit is a voltage amplifier with a moderate negative gain set mainly by the ratio of nMOS to pMOS strengths.",
        "format": "markdown",
        "sha256": "6d1820fe790aefb3a4502c3799f1a5e2d0fa831296c2eefa91677b651904cced"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and derives the inverting gain −gm1/gm2. Its channel-length-modulation expression also accounts for the diode-connected PMOS conductance; the additional DC and operating-region discussion is consistent.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9523,
        "total_tokens": 10167,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8171,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9523,
        "total_tokens": 10167,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8171,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common‑source NMOS stage loaded by a diode‑connected PMOS transistor.  \nM1 is an n‑MOS with source at ground.  \nM2 is a p‑MOS with its gate shorted to its drain and connected to the output node.\n\n---\n\n## 1. Regions of operation and DC transfer\n\nLet  \n\n- \\(V_{TN}\\) = NMOS threshold,  \n- \\(|V_{TP}|\\) = magnitude of PMOS threshold,  \n- \\(\\beta_n=\\mu_n C_{ox}(W/L)_1\\), \\(\\beta_p=\\mu_p C_{ox}(W/L)_2\\) (process + size factors).  \n- Supply is \\(V_{DD}\\).\n\nNode relations:\n\n- For M1: \\(V_{GS1}=V_{in}\\), \\(V_{DS1}=V_{out}\\).\n- For M2: \\(V_{SG2}=V_{DD}-V_{out}\\), \\(V_{SD2}=V_{DD}-V_{out}\\).\n\nBecause gate and drain of M2 are shorted, \\(V_{SG2}=V_{SD2}\\).  \nA PMOS is in saturation when \\(V_{SD} \\ge V_{SG}-|V_{TP}|\\).    \nWith \\(V_{SD2}=V_{SG2}\\) this is always satisfied once the device is on, so:\n\n**M2 is either cut off or in saturation; it never operates in triode.**\n\nBelow, channel‑length modulation (\\(\\lambda\\)) is neglected for clarity.\n\n---\n\n### Region 1 – NMOS off\n\nIf \\(V_{in} < V_{TN}\\), M1 is off \\((I_{D1}\\approx0)\\).  \nNo dc current can flow, so M2 must also be off, which occurs when\n\n\\[\nV_{SG2} = V_{DD}-V_{out} \\le |V_{TP}|.\n\\]\n\nThe only consistent dc solution is nearly\n\n\\[\nV_{out} \\approx V_{DD}.\n\\]\n\nSo for low input the output is a logic ‘1’.\n\n---\n\n### Region 2 – both transistors in saturation\n\nWhen \\(V_{in} > V_{TN}\\), M1 turns on. Current through M1 pulls \\(V_{out}\\) down until M2 also turns on; then we have a steady state with both transistors on and saturated.\n\nCurrents (saturation):\n\n\\[\nI_{D1}=\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2,\n\\]\n\\[\nI_{D2}=\\frac{\\beta_p}{2}(V_{DD}-V_{out}-|V_{TP}|)^2.\n\\]\n\nKCL at the output node gives \\(I_{D1}=I_{D2}\\):\n\n\\[\n\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n  =\\frac{\\beta_p}{2}(V_{DD}-V_{out}-|V_{TP}|)^2.\n\\]\n\nSolving for \\(V_{out}\\) gives a **linear** dependence:\n\n\\[\n\\boxed{V_{out}\n = V_{DD}-|V_{TP}|-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,(V_{in}-V_{TN})}\n\\]\n\n(valid as long as M1 remains in saturation).\n\nFor M1, saturation requires\n\n\\[\nV_{out} \\ge V_{in}-V_{TN}.\n\\]\n\nSubstituting the above \\(V_{out}\\) gives the upper limit of this region:\n\n\\[\nV_{in} \\le V_X\n= V_{TN}+\\frac{V_{DD}-|V_{TP}|}{1+\\sqrt{\\beta_n/\\beta_p}}.\n\\]\n\nAt the ends of Region 2:\n\n- At \\(V_{in}=V_{TN}\\): \\(V_{out}=V_{DD}-|V_{TP}|\\). Both devices are just at threshold.\n- At \\(V_{in}=V_X\\): \\(V_{out}=V_{in}-V_{TN}\\); M1 is exactly at the boundary of saturation/triode.\n\n---\n\n### Region 3 – M1 in triode, M2 in saturation\n\nFor \\(V_{in} > V_X\\), M1 moves into triode:\n\n\\[\nI_{D1}=\\beta_n\\big[(V_{in}-V_{TN})V_{out}-\\frac{1}{2}V_{out}^2\\big],\n\\]\n\nwhile M2 is still saturated:\n\n\\[\nI_{D2}=\\frac{\\beta_p}{2}(V_{DD}-V_{out}-|V_{TP}|)^2.\n\\]\n\nEquating currents,\n\n\\[\n\\boxed{\\beta_n\\Big[(V_{in}-V_{TN})V_{out}-\\tfrac{1}{2}V_{out}^2\\Big]\n   =\\frac{\\beta_p}{2}(V_{DD}-V_{out}-|V_{TP}|)^2}\n\\]\n\nThis implicit equation gives \\(V_{out}(V_{in})\\) in Region 3.  \nFor very large \\(V_{in}\\) (e.g. \\(V_{in}=V_{DD}\\)), \\(V_{out}\\) settles at a small but non‑zero value \\(V_{OL}\\), determined by that equation; in practice we often approximate \\(V_{OL}\\) by assuming \\(V_{out}\\) is small:\n\n\\[\nV_{OL} \\approx \n\\frac{\\beta_p}{2\\beta_n (V_{in}-V_{TN})}(V_{DD}-|V_{TP}|)^2\n\\qquad (V_{OL} \\ll V_{DD}).\n\\]\n\nSo for high input the output is a logic ‘0’ but not exactly at 0 V.\n\n---\n\n### Static power\n\n- For low input: M1 off ⇒ no dc current ⇒ zero static power.\n- For high input: both devices strongly on ⇒ a dc path from \\(V_{DD}\\) to ground.  \n  The static current is \\(I_{D} = I_{D2} = I_{D1}\\) at the solution for \\(V_{OL}\\).\n\nSo, unlike a CMOS inverter, this circuit dissipates static power when the output is low.\n\n---\n\n## 2. Small‑signal (analog) view\n\nBias the circuit at some operating point in Region 2 (both saturated) and apply a small signal \\(v_{in}\\) around that bias.\n\n- M1 (common source):\n\n  Small‑signal drain current: \\(i_{d1} = g_{m1} v_{in} + g_{d1} v_{out}\\).\n\n- M2 (diode‑connected pMOS):\n\n  With gate shorted to drain, its small‑signal current is  \n\n  \\(i_{d2} = (g_{m2}+g_{d2}) v_{out}\\).\n\n  This behaves like a resistor from the output to \\(V_{DD}\\) of value\n\n  \\[\n  r_L \\approx \\frac{1}{g_{m2}+g_{d2}} \\approx \\frac{1}{g_{m2}}\n  \\]\n\n  (since usually \\(g_{m2} \\gg g_{d2}\\)).\n\nThe small‑signal gain is therefore\n\n\\[\nA_v = \\frac{v_{out}}{v_{in}}\n   \\approx -g_{m1}\\,(r_L \\parallel r_{o1})\n   \\approx -g_{m1}\\left(\\frac{1}{g_{m2}}\\right)\n   = -\\frac{g_{m1}}{g_{m2}}\n\\]\n\nif \\(r_{o1}\\) is large.\n\nThus this is a **common‑source amplifier with diode‑connected active load**, giving negative gain of magnitude roughly \\(g_{m1}/g_{m2}\\).\n\n---\n\n### Summary\n\n- The circuit is an NMOS common‑source stage with a diode‑connected PMOS load.\n- For \\(V_{in}<V_{TN}\\): \\(V_{out}\\approx V_{DD}\\).  \n- For \\(V_{TN}<V_{in}<V_X\\): both transistors saturated, with  \n  \\(V_{out}= V_{DD}-|V_{TP}|-\\sqrt{\\beta_n/\\beta_p}\\,(V_{in}-V_{TN})\\).\n- For \\(V_{in}>V_X\\): M1 is in triode; \\(V_{out}\\) is found from the nonlinear equality above and approaches a small \\(V_{OL}\\).\n- As an analog stage, its small‑signal gain is roughly \\(-g_{m1}/g_{m2}\\); as a digital gate it works as an inverter but has static power dissipation when the output is low.",
        "format": "markdown",
        "sha256": "2b41a8324aec12fb411a820aad828ae7a98d578c75ff80630181ba9ec39f038b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS with diode-connected PMOS load and gives the inverting gain. Its small-signal expression includes output conductance for both devices, with the expected \u001c−gm1/gm2\u001d approximation.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9065,
        "total_tokens": 9709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7194,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9065,
        "total_tokens": 9709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7194,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M1 is an n‑MOSFET whose source is at ground and whose drain is the output node.  \nM2 is a p‑MOSFET whose source is at \\(V_{DD}\\) and whose gate is shorted to its drain, so M2 is **diode‑connected** and behaves like a nonlinear resistor from \\(V_{DD}\\) to \\(V_{out}\\).\n\n---\n\n### 1. Qualitative operation (digital view)\n\n- **Low input** \\((V_{in}<V_{TN})\\)\n\n  - \\(M_1\\) is OFF, so no current can flow to ground.  \n  - Any previous charge at the output is pulled up through \\(M_2\\) until \\(V_{out}\\approx V_{DD}\\) (then \\(M_2\\) also turns off because its source and drain are nearly equal).  \n  - Output logic level: \\(V_{OH}\\approx V_{DD}\\). Static current \\(\\approx 0\\).\n\n- **High input** \\((V_{in}\\) large\\()\\)\n\n  - \\(M_1\\) turns ON and starts pulling the output node down.  \n  - As \\(V_{out}\\) falls, \\(M_2\\) turns ON (because \\(V_{SG2}=V_{DD}-V_{out} > |V_{TP}|\\)) and supplies current from \\(V_{DD}\\) to the output.  \n  - A DC operating point is reached when the pull‑down current of \\(M_1\\) equals the pull‑up current of \\(M_2\\).  \n  - \\(V_{out}\\) is a low but non‑zero voltage, \\(V_{OL}>0\\); both transistors conduct, so there is static power dissipation:\n    \\[\n    P_{static}=V_{DD}\\,I_D \\quad \\text{(with }I_D=I_{D1}=I_{D2}\\text{ at }V_{in}=\\text{logic “1”)}.\n    \\]\n\nThus the circuit behaves as an **inverter with a diode‑connected pMOS load** (ratioed logic): it does not pull all the way to ground at logic “0” and it burns DC power when the output is low.\n\n---\n\n### 2. DC transfer characteristic (symbolic)\n\nAssume long‑channel devices, no channel‑length modulation, bodies tied to supplies.\n\nLet  \n\n\\[\n\\beta_n = \\mu_n C_{ox}\\frac{W_1}{L_1},\\qquad\n\\beta_p = \\mu_p C_{ox}\\frac{W_2}{L_2},\n\\]\nwith thresholds \\(V_{TN}\\) and \\(V_{TP}\\) \\((V_{TP}<0)\\).\n\n#### (a) Region where both transistors are in saturation  \n\nConditions:\n\\[\nV_{in}>V_{TN},\\qquad\nV_{out}\\ge V_{in}-V_{TN},\\qquad\nV_{out}\\le V_{DD}-|V_{TP}|.\n\\]\n\nCurrents (magnitudes) in saturation:\n\\[\nI_{D1}=\\tfrac12\\beta_n (V_{in}-V_{TN})^2,\n\\qquad\nI_{D2}=\\tfrac12\\beta_p (V_{DD}-V_{out}-|V_{TP}|)^2.\n\\]\n\nKCL at \\(V_{out}\\) gives \\(I_{D1}=I_{D2}\\), so\n\\[\n\\sqrt{\\beta_n}\\,(V_{in}-V_{TN})=\n\\sqrt{\\beta_p}\\,(V_{DD}-V_{out}-|V_{TP}|),\n\\]\n\n\\[\n\\boxed{\\,V_{out}\n = V_{DD}-|V_{TP}|\n   -\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,(V_{in}-V_{TN})\\, }\n\\]\n\n(a straight‑line portion of the transfer curve).\n\nThe point where \\(V_{in}=V_{out}\\) in this region gives the switching threshold \\(V_M\\).\n\n#### (b) Region where \\(M_1\\) is in triode, \\(M_2\\) in saturation  \n\nCondition: \\(V_{out}<V_{in}-V_{TN}\\).\n\nThen\n\\[\nI_{D1}= \\beta_n\\left[(V_{in}-V_{TN})V_{out}-\\tfrac12 V_{out}^2\\right],\n\\]\n\\[\nI_{D2}= \\tfrac12\\beta_p (V_{DD}-V_{out}-|V_{TP}|)^2.\n\\]\n\nEquating currents:\n\\[\n\\boxed{ \\beta_n\\left[(V_{in}-V_{TN})V_{out}-\\tfrac12 V_{out}^2\\right]\n      = \\tfrac12\\beta_p (V_{DD}-V_{out}-|V_{TP}|)^2 }\n\\]\n\nThis implicit relation gives \\(V_{out}(V_{in})\\) in the steep part of the transition and determines \\(V_{OL}\\) and the DC current when \\(V_{in}=V_{DD}\\).\n\n---\n\n### 3. Small‑signal view (if used as an analog amplifier)\n\nBias \\(V_{in}\\) so that both devices are in saturation.\n\n- Diode‑connected \\(M_2\\) presents roughly a resistance\n  \\[\n  r_{L}\\approx \\frac{1}{g_{m2}} \\quad (\\text{since }r_{o2}\\gg 1/g_{m2}),\n  \\]\n  from \\(V_{out}\\) to the AC ground at \\(V_{DD}\\).\n- \\(M_1\\) is a common‑source device with transconductance \\(g_{m1}\\) and output resistance \\(r_{o1}\\).\n\nIgnoring body effect and \\(r_o\\) for simplicity:\n\n\\[\nA_v \\approx -\\frac{g_{m1}}{g_{m2}}.\n\\]\n\nIncluding output resistances:\n\n\\[\nA_v \\approx\n- g_{m1}\\big(r_{o1} \\parallel (r_{o2} \\parallel 1/g_{m2})\\big).\n\\]\n\n---\n\nIn summary, this is a common‑source stage (or inverter) with a diode‑connected pMOS active load:  \n\n- VOH ≈ \\(V_{DD}\\), VOL > 0,  \n- static current flows at logic “0”,  \n- small‑signal gain ≈ \\(-g_{m1}/g_{m2}\\) when both devices are in saturation.",
        "format": "markdown",
        "sha256": "7ac031e99cfbddefff6d988497a4316754ffa9030420377f3182ac0e1b6d0c8b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain −gm1/gm2. Its output-resistance expression includes ro1 and ro2 consistently; the additional analysis does not undermine the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 13400,
        "total_tokens": 14044,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11994,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 13400,
        "total_tokens": 14044,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11994,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "- \\(M_2\\) is a PMOS with source at \\(V_{DD}\\), drain at \\(V_{out}\\), and gate driven by \\(V_{in}\\).  \n- \\(M_1\\) is an NMOS with its **gate and source tied to ground**; its drain is at \\(V_{out}\\).\n\nAssume normal CMOS supplies: \\(0 \\le V_{in} \\le V_{DD}\\).\n\n### State of \\(M_1\\)\nGate and source of \\(M_1\\) are both at 0 V ⇒  \n\\(V_{GS1} = 0\\) for all operating points, so \\(M_1\\) is always in cutoff (ignoring leakage).  \nThus there is effectively **no dc path from \\(V_{out}\\) to ground**.\n\n### State of \\(M_2\\) and \\(V_{out}\\)\n\n1. **\\(V_{in}\\) low (near 0)**  \n   - \\(M_2\\) is ON (\\(V_{SG2} = V_{DD}-V_{in} > |V_{tp}|\\)).  \n   - With no load to ground (since \\(M_1\\) is off), \\(M_2\\) charges the output node until its drain current becomes zero.  \n   - That occurs when \\(V_{out} = V_{DD}\\) (no voltage across \\(M_2\\)).  \n   ⇒ \\(V_{out} \\approx V_{DD}\\).\n\n2. **\\(V_{in}\\) high (≈ \\(V_{DD}\\))**  \n   - \\(M_2\\) is OFF (\\(V_{SG2} \\approx 0\\)).  \n   - \\(M_1\\) is still OFF.  \n   - The output node is therefore **floating**; it simply holds whatever charge it previously had (ideally \\(V_{DD}\\)), slowly drifting due to leakage.\n\n### Overall behavior\n\nAs drawn, the circuit is **not a CMOS inverter**:\n\n- A low \\(V_{in}\\) actively drives \\(V_{out}\\) high (\\(V_{DD}\\)).\n- A high \\(V_{in}\\) places \\(V_{out}\\) in a high‑impedance (floating) state; it does *not* drive \\(V_{out}\\) low.\n\n\\(M_1\\) contributes essentially nothing to the dc behavior because it is permanently off. If the intention was a standard CMOS inverter, the gate of \\(M_1\\) should be driven by \\(V_{in}\\), not tied to ground.",
        "format": "markdown",
        "sha256": "624acfea38fe669c6582de1db96bea28db251e478b9b5521f3b48b1715fc97ab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS that is off. It is a diode-connected PMOS load, so the claimed floating output and missing pull-down path contradict the circuit’s central behavior.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9050,
        "total_tokens": 9694,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8503,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9050,
        "total_tokens": 9694,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8503,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "- M₂ is a p‑MOSFET with source at \\(V_{DD}\\), drain at \\(V_{out}\\), and gate driven by \\(V_{in}\\).  \n- M₁ is an n‑MOSFET with drain at \\(V_{out}\\), source at ground, and its gate permanently tied to ground.\n\nAssume usual CMOS supplies: \\(V_{DD} > 0\\), \\(V_{TN} > 0\\), \\(V_{TP} < 0\\), and bodies tied to their respective rails.\n\n---\n\n### Operation of M₁\n\nFor the nMOS M₁:\n\n- Gate: \\(V_{G1} = 0\\)\n- Source (for normal operation with \\(0 \\le V_{out} \\le V_{DD}\\)): \\(V_{S1} = 0\\)\n\nThus  \n\\[\nV_{GS1} = V_{G1} - V_{S1} = 0\n\\]\nSince \\(V_{GS1} = 0 < V_{TN}\\), M₁ is OFF for any normal (non‑negative) value of \\(V_{out}\\). It provides essentially no DC path from \\(V_{out}\\) to ground (ignoring subthreshold leakage and the body diode for negative \\(V_{out}\\)).\n\nSo, in the normal operating range, M₁ does nothing; it does **not** act as a pull‑down.\n\n---\n\n### Operation of M₂\n\nFor the pMOS M₂:\n\n- Source: \\(V_{S2} = V_{DD}\\)\n- Gate: \\(V_{G2} = V_{in}\\)\n\nIt turns ON when\n\\[\nV_{SG2} = V_{S2} - V_{G2} = V_{DD} - V_{in} > |V_{TP}|\n\\]\ni.e. for\n\\[\nV_{in} < V_{DD} - |V_{TP}|\n\\]\n\nWhen M₂ is ON and M₁ is OFF and there is no other load, the only possible DC solution is\n\\[\nV_{out} = V_{DD}\n\\]\nbecause no current can flow (no return path), so M₂ simply charges the output node up to \\(V_{DD}\\) and then its \\(V_{SD}\\) goes to zero.\n\nWhen \\(V_{in} > V_{DD} - |V_{TP}|\\), M₂ turns OFF as well. With both transistors OFF, the output node is **floating** (its voltage is whatever charge is left on its capacitance or what any external load forces it to be).\n\n---\n\n### Input–output behavior\n\n- For low \\(V_{in}\\):  \n  - M₂ ON, M₁ OFF ⇒ \\(V_{out}\\) driven up to \\(V_{DD}\\).\n\n- For high \\(V_{in}\\):  \n  - M₂ OFF, M₁ OFF ⇒ \\(V_{out}\\) is not actively driven (high‑impedance node).\n\nThus, as drawn, this circuit:\n\n- Never provides a valid low level at the output.\n- Behaves like a pMOS switch from \\(V_{DD}\\) to \\(V_{out}\\), controlled by \\(V_{in}\\), with no defined pull‑down path.\n\nIt is **not** a proper CMOS inverter; to make an inverter, M₁’s gate would also have to be driven by \\(V_{in}\\) (so that when M₂ is OFF, M₁ is ON and can pull \\(V_{out}\\) to ground).",
        "format": "markdown",
        "sha256": "78032fff57e3f41536ab8be2ec74ccab163dd18515c61f1557261a2f28f2b153"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M₁ as an NMOS. It is a diode-connected PMOS load, so the output is not floating as claimed; the circuit is a gm/gm amplifier with gain approximately −gm₂/gm₁.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 7554,
        "total_tokens": 8198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6800,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 7554,
        "total_tokens": 8198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6800,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat both transistors as identical nMOS devices with threshold \\(V_{TN}\\), square‑law behavior, body tied to source, and \\(\\lambda \\approx 0\\).  \n\\(M_1\\) is diode connected (gate and drain at \\(V_{out}\\)), its source at ground.  \n\\(M_2\\) is between \\(V_{DD}\\) and \\(V_{out}\\); its gate is driven by \\(V_{in}\\).\n\n---\n\n### Operating regions\n\n- \\(M_1\\) turns on when \\(V_{out} \\ge V_{TN}\\).\n- \\(M_2\\) turns on when \\(V_{GS2}=V_{in}-V_{out} \\ge V_{TN}\\).\n\nIf both devices are on, check saturation:\n\n- \\(M_1\\): \\(V_{DS1}=V_{out}\\), \\(V_{GS1}=V_{out}\\).  \n  Saturation condition  \n  \\[\n  V_{DS1} \\ge V_{GS1}-V_{TN}\n  \\Rightarrow V_{out} \\ge V_{out}-V_{TN} \\quad\\text{(always true for }V_{out}>0\\text{)}\n  \\]\n  ⇒ \\(M_1\\) is always saturated when on.\n\n- \\(M_2\\): \\(V_{DS2}=V_{DD}-V_{out}\\), \\(V_{GS2}=V_{in}-V_{out}\\).  \n  Saturation condition  \n  \\[\n  V_{DD}-V_{out} \\ge (V_{in}-V_{out})-V_{TN}\n  \\Rightarrow V_{DD} \\ge V_{in}-V_{TN}\n  \\]\n  which is satisfied for all practical cases where \\(V_{in} \\le V_{DD}\\).\n\nSo when both conduct they are in saturation.\n\n---\n\n### Relationship \\(V_{out}(V_{in})\\)\n\nIn saturation (with identical transistors, transconductance parameter \\(\\beta\\)),\n\n\\[\nI_{D1} = \\frac{1}{2}\\beta (V_{out}-V_{TN})^{2}\n\\]\n\\[\nI_{D2} = \\frac{1}{2}\\beta (V_{in}-V_{out}-V_{TN})^{2}\n\\]\n\nBecause the transistors are in series, \\(I_{D1}=I_{D2}\\):\n\n\\[\n(V_{out}-V_{TN})^{2} = (V_{in}-V_{out}-V_{TN})^{2}\n\\]\n\nTaking square roots (and using the physically meaningful sign):\n\n\\[\nV_{out}-V_{TN} = V_{in}-V_{out}-V_{TN}\n\\]\n\\[\n2V_{out}=V_{in} \\quad\\Rightarrow\\quad\n\\boxed{V_{out}=\\dfrac{V_{in}}{2}}\n\\]\n\nThis solution is valid only while both transistors are on:\n\n- \\(M_1\\) on: \\(V_{out} \\ge V_{TN}\\) ⇒ \\(V_{in}/2 \\ge V_{TN}\\) ⇒ \\(V_{in} \\ge 2V_{TN}\\).\n- \\(M_2\\) on: \\(V_{in}-V_{out}=V_{in}/2 \\ge V_{TN}\\) ⇒ same condition \\(V_{in} \\ge 2V_{TN}\\).\n\nFor \\(V_{in} < 2V_{TN}\\), at least one device is off and, in the ideal DC model, the node cannot rise above 0, so we approximate\n\n\\[\nV_{out} \\approx 0, \\qquad V_{in} \\le 2V_{TN}.\n\\]\n\nThus the DC transfer characteristic is\n\n\\[\nV_{out} =\n\\begin{cases}\n0, & V_{in} \\le 2V_{TN} \\\\\n\\dfrac{V_{in}}{2}, & V_{in} \\ge 2V_{TN}\n\\end{cases}\n\\]\n\nand the small‑signal gain in the active region is\n\n\\[\n\\frac{dV_{out}}{dV_{in}} = \\frac{1}{2}.\n\\]\n\n---\n\n**Function of the circuit**\n\nFor \\(V_{in}\\) above approximately \\(2V_{TN}\\), the circuit acts as a level shifter / voltage divider: the output tracks one‑half of the input voltage, largely independent of transistor parameters so long as the two nMOS devices are matched and remain in saturation.",
        "format": "markdown",
        "sha256": "70d10e86ee87ff429ccfda6f5550ff4fa58bd20d48f588732403ee764b38e537"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies both devices as NMOS and reverses the key connections. The actual circuit is a PMOS common-source input device with a diode-connected PMOS load, giving approximately −gm2/gm1 gain—not a positive-gain voltage divider.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 13183,
        "total_tokens": 13827,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 13183,
        "total_tokens": 13827,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Take small‑signal values:\n\n- For \\(M_1\\): \\(g_{m1}, r_{o1}\\)\n- For \\(M_2\\): \\(g_{m2}, r_{o2}\\)\n\nSince \\(V_{DD}, V_{b1}, V_{b2}\\) are dc sources, they are small‑signal ground.  \nLook into the node \\(R_{\\text{out}}\\); apply a test voltage \\(v_o\\) and find the current \\(i_o\\).\n\nUsing the small‑signal model for PMOS with source at the top:\n\n\\[\n\\begin{aligned}\n\\text{Node }X:&\\quad\ng_{m1}v_x + \\frac{v_x-v_o}{r_{o1}} + \\frac{v_x}{r_{o2}} =0\n\\\\[2mm]\n\\Rightarrow\\; v_x &= \\frac{r_{o2}}{g_{m1}r_{o1}r_{o2}+r_{o1}+r_{o2}}\\,v_o\n\\end{aligned}\n\\]\n\nThe current leaving the output node through \\(M_1\\) is\n\n\\[\ni_o = \\frac{v_o-v_x}{r_{o1}} + g_{m1}v_x\n\\]\n\nSubstituting \\(v_x\\) and simplifying:\n\n\\[\n\\frac{i_o}{v_o} = \\frac{1}{R_{\\text{out}}}\n      = \\frac{1}{g_{m1}r_{o1}r_{o2}+r_{o1}+r_{o2}}\n\\]\n\nso\n\n\\[\n\\boxed{R_{\\text{out}} = g_{m1}r_{o1}r_{o2} + r_{o1} + r_{o2}}\n\\]\n\nIf both transistors are identical (\\(g_{m1}=g_{m2}=g_m,\\; r_{o1}=r_{o2}=r_o\\)) and \\(g_m r_o \\gg 1\\),\n\n\\[\nR_{\\text{out}} \\approx g_m r_o^2\n\\]\n\n(the term \\(g_m r_o^2\\) dominates over \\(2r_o\\)).",
        "format": "markdown",
        "sha256": "9103fa6af51de9988c106e6516bf5ef62b3ae3f572a34a8502cb30bd89167691"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It treats the stack as PMOS and uses M1’s transconductance as the cascode factor, giving the correct Rout expression and approximation. Body effect is optional under the full-credit rule.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 642,
        "output_tokens": 19424,
        "total_tokens": 20066,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18946,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 642,
        "output_tokens": 19424,
        "total_tokens": 20066,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18946,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming both PMOS transistors are in saturation and using small‑signal parameters  \n\\(g_{m1},r_{o1}\\) for \\(M_1\\) and \\(g_{m2},r_{o2}\\) for \\(M_2\\), with \\(V_{DD},V_{b1},V_{b2}\\) as AC grounds:\n\n1. Small‑signal node equations\n\nAt node \\(X\\):\n\n\\[\n\\frac{v_x}{r_{o2}} + \\frac{v_x - v_o}{r_{o1}} + g_{m1}v_x = 0\n\\]\n\nAt output node \\(o\\) (where \\(R_{out}=v_o/i_o\\)):\n\n\\[\ni_o = \\frac{v_o - v_x}{r_{o1}} - g_{m1}v_x\n\\]\n\n2. Solving these equations gives\n\n\\[\nR_{out} = \\frac{v_o}{i_o}\n       = r_{o1} + r_{o2} + g_{m1} r_{o1} r_{o2}\n\\]\n\nIf \\(g_{m1}r_{o1} \\gg 1\\) and \\(g_{m1}r_{o2} \\gg 1\\),\n\n\\[\n\\boxed{R_{out} \\approx g_{m1} r_{o1} r_{o2}}\n\\]\n\nSo the output resistance of this cascoded PMOS current source is dominated by the term \\(g_{m1} r_{o1} r_{o2}\\).",
        "format": "markdown",
        "sha256": "8937ca4da5444ba3ed13f691b8e35e059df1e1d6db5cd3093c4b356a3f0eaea6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the devices as PMOS, uses M1 as the cascode device, and gives the correct output-resistance expression and approximation; omitting body effect is allowed.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 642,
        "output_tokens": 10397,
        "total_tokens": 11039,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10054,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 642,
        "output_tokens": 10397,
        "total_tokens": 11039,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10054,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Take \\(V_{DD}, V_{b1}, V_{b2}\\) as AC grounds and apply a test voltage \\(v_{out}\\) at the output node (source of \\(M_1\\)).\n\nIgnoring channel‑length modulation (\\(r_o\\rightarrow\\infty\\)), the small‑signal model has only the transconductances \\(g_{m1}, g_{m2}\\).\n\nAt node \\(X\\):\n\n\\[\n-g_{m1}v_{out}-g_{m2}v_X=0\n\\quad\\Rightarrow\\quad v_X=-\\frac{g_{m1}}{g_{m2}}v_{out}\n\\]\n\nThe current flowing from the output node into the circuit is the source current of \\(M_1\\):\n\n\\[\ni_{out}=g_{m1}v_{out}\n\\]\n\nThus,\n\n\\[\nR_{out}=\\frac{v_{out}}{i_{out}}=\\frac{1}{g_{m1}}\n\\]\n\nSo the output resistance seen at the bottom node is\n\n\\[\n\\boxed{R_{out}\\approx \\dfrac{1}{g_{m1}}}\n\\]\n\n(independent of \\(M_2\\); including finite \\(r_o\\) only gives small corrections).",
        "format": "markdown",
        "sha256": "d3b4380d72fb1b360218eb1cafab4dd95892e2a6a0f08251154947453569fa0e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The output is at the drain of PMOS M1, not its source. Treating it as a source-follower port and neglecting finite output resistances misses the cascode mechanism; the result should be dominated by the multiplied output resistances, not 1/gm1.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 642,
        "output_tokens": 14805,
        "total_tokens": 15447,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14532,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 642,
        "output_tokens": 14805,
        "total_tokens": 15447,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14532,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For M2 we must satisfy the MOSFET saturation condition\n\n\\[\nV_{DS2} \\ge V_{GS2}-V_T\n\\]\n\n(assuming an NMOS device; for a PMOS the polarities are reversed).\n\nFrom the circuit, M2 has  \n- drain at \\(V_{DD}\\)  \n- source at node \\(X\\)  \n- gate at \\(V_{b2}\\).\n\nSo\n\n\\[\nV_{DS2}=V_{DD}-V_X,\\qquad V_{GS2}=V_{b2}-V_X\n\\]\n\nPlugging into the saturation condition:\n\n\\[\nV_{DD}-V_X \\ge (V_{b2}-V_X) - V_T\n\\]\n\n\\[\n\\Rightarrow V_{DD} \\ge V_{b2}-V_T\n\\]\n\nThus, by choosing the bias \\(V_{b2}\\) such that\n\n\\[\nV_{b2} \\le V_{DD} - V_T\n\\]\n\n(the gate never higher than \\(V_{DD}-V_T\\)), M2’s inequality is always satisfied for any value of node \\(X\\), and M2 remains in saturation.",
        "format": "markdown",
        "sha256": "62aeba7fa74b29050a674d00e989abbb364ce83c621746476c8a11cd84d53a62"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reverses M2’s source and drain and applies an NMOS condition. It therefore misses that M2 is PMOS and that its saturation condition must be related to VX, which is set mainly by Vb1, rather than treating Vb2 as the controlling bias.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 11336,
        "total_tokens": 11986,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11086,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 11336,
        "total_tokens": 11986,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11086,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For transistor M2 (a pMOS connected to \\(V_{DD}\\)) to be in saturation, its source–drain voltage must be at least its overdrive:\n\n\\[\nV_{SD2} \\ge V_{SG2} - |V_{TP2}|\n\\]\n\nHere  \n\\(V_{SD2} = V_{DD} - V_X\\) and \\(V_{SG2} = V_{DD} - V_{b2}\\).\n\nSo\n\n\\[\nV_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{TP2}|\n\\]\n\n\\[\n\\Rightarrow V_X \\le V_{b2} + |V_{TP2}|\n\\]\n\nThus, to ensure that M2 is always in saturation, choose the bias \\(V_{b2}\\) such that, for all operating conditions, the node voltage \\(V_X\\) never exceeds\n\n\\[\nV_X^{\\text{max}} = V_{b2} + |V_{TP2}|.\n\\]\n\n(If the devices were nMOS instead, the corresponding condition would be \\(V_X \\ge V_{b2} - V_{TN2}\\).)",
        "format": "markdown",
        "sha256": "11558c109a6280307f21a03bb7016fad7f89817ae1f2d1a75765a11b05a89d34"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The PMOS saturation condition is correct, but the answer treats Vb2 as the control and does not relate VX to Vb1, which is the essential condition in the golden solution.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 5798,
        "total_tokens": 6448,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5539,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 5798,
        "total_tokens": 6448,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5539,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For M2 (a p‑MOS) to operate in saturation its drain–source voltage must be at least its over‑drive voltage:\n\n\\[\nV_{SD2} \\ge V_{SG2}-|V_{tp}|\n\\]\n\nFor M2 in the circuit\n\n- \\(V_{S2}=V_{DD}\\)\n- \\(V_{G2}=V_{b2}\\)\n- \\(V_{D2}=V_X\\)\n\nHence\n\n\\[\nV_{DD}-V_X \\ge (V_{DD}-V_{b2})-|V_{tp}|\n\\]\n\n\\[\n\\Rightarrow \\boxed{V_X \\le V_{b2}+|V_{tp}|}\n\\]\n\nSo we must bias \\(V_{b2}\\) (and restrict the voltage at node \\(X\\)) such that this inequality is always satisfied. Equivalently: keep the voltage drop across M2 (\\(V_{SD2}\\)) at least equal to its overdrive voltage, ensuring M2 stays in saturation.",
        "format": "markdown",
        "sha256": "1c2034d2c934cea354189ef07fa8e09a93c7d787ac41125b6471abaaa4b6a7fa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The PMOS saturation condition is correct, but the answer treats Vb2 as the control and misses that VX is set by Vb1, which yields the required condition on Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 6550,
        "total_tokens": 7200,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6331,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 650,
        "output_tokens": 6550,
        "total_tokens": 7200,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6331,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **NMOS cascode amplifier with a current‑source load**.\n\n---\n\n### 1. DC operation\n\n- The ideal current source \\(I_1\\) forces a DC current \\(I_D \\approx I_1\\) through the series pair \\(M_2\\)–\\(M_1\\).\n- \\(M_1\\) is a common‑source device:\n\n\\[\nI_D \\approx \\frac{1}{2}k'_n\\frac{W_1}{L_1}(V_{in}-V_{t1})^2 \\qquad\n(\\text{assuming saturation})\n\\]\n\n- Node voltages (for both devices in saturation):\n\n\\[\n\\begin{aligned}\nV_X &\\ge V_{OV1} = V_{GS1}-V_{t1} \\quad (\\text{for }M_1) \\\\\nV_{OUT}-V_X &\\ge V_{OV2} = V_{GS2}-V_{t2} \\quad (\\text{for }M_2) \\\\\nV_{GS2} &= V_{b1}-V_X\n\\end{aligned}\n\\]\n\nFrom this last relation,\n\n\\[\nV_X = V_{b1}-V_{GS2}\\approx V_{b1}-(V_{OV2}+V_{t2})\n\\]\n\nand \\(V_{OUT}\\) follows from the drop needed to keep \\(M_2\\) in saturation.\n\nSo \\(I_1\\) sets the current; \\(V_{b1}\\) is chosen so both transistors remain in saturation over the required output‑voltage range.\n\n---\n\n### 2. Small‑signal model\n\nLet the small‑signal parameters be \\(g_{m1}, g_{m2}\\) and \\(r_{o1}, r_{o2}\\) for \\(M_1, M_2\\), and \\(r_I\\) for the current source.\n\nWith \\(V_{b1}\\) purely DC‑biased, its small‑signal is an AC ground.  \nSmall‑signal circuit:\n\n- Input: gate of \\(M_1\\) (very high resistance).\n- Node \\(X\\): drain of \\(M_1\\), source of \\(M_2\\).\n- Output: drain of \\(M_2\\), loaded by \\(r_I\\).\n\n---\n\n### 3. Midband gain \\(A_v = v_{out}/v_{in}\\)\n\nWrite KCL at nodes \\(X\\) and \\(OUT\\).  \nSolving (keeping all \\(r_o\\) and \\(r_I\\)) gives\n\n\\[\nA_v = \\frac{v_{out}}{v_{in}} = \n-\\frac{g_{m1}\\left[g_{m2}r_{o2}(r_{o1}\\parallel r_I)+r_{o1}\\parallel(r_{o2}\\parallel r_I)\\right]}\n{1+g_{m2}r_{o2} + \\dfrac{r_{o2}}{r_I}}\n\\]\n\nA simpler and very common approximation is obtained when\n\n- the current source is “ideal”: \\(r_I\\to\\infty\\),\n- and \\(g_{m2}r_{o2}\\gg 1\\).\n\nThen\n\n\\[\n\\boxed{A_v \\approx -g_{m1}\\big[r_{o2} + (1+g_{m2}r_{o2})r_{o1}\\big]\n      \\;\\approx\\; -g_{m1}g_{m2}r_{o1}r_{o2}}\n\\]\n\nThe large gain comes from the product \\(g_{m1}g_{m2}r_{o1}r_{o2}\\).\n\n---\n\n### 4. Output resistance\n\nSet \\(v_{in}=0\\) and apply a test current at the output.\n\nWith \\(r_I\\to\\infty\\), the small‑signal output resistance seen at \\(v_{out}\\) is\n\n\\[\n\\boxed{R_{out} \\approx r_{o2} + (1+g_{m2}r_{o2})r_{o1}\n      \\;\\approx\\; g_{m2}r_{o1}r_{o2}}\n\\]\n\n(again assuming \\(g_{m2}r_{o2}\\gg 1\\)).  \nThis is much larger than \\(r_{o1}\\) or \\(r_{o2}\\) alone: that is the main benefit of the cascode.\n\nWith a finite‑resistance current source \\(r_I\\),\n\n\\[\nR_{out} \\approx r_I \\parallel \\left[r_{o2} + (1+g_{m2}r_{o2})r_{o1}\\right].\n\\]\n\n---\n\n### 5. Interpretation\n\n- \\(M_1\\) is a **common‑source transconductor**: it converts \\(v_{in}\\) to a small‑signal drain current \\(g_{m1}v_{in}\\).\n- The stack \\(M_2\\)+\\(I_1\\) behaves as a **very large resistance** from node \\(X\\) to \\(V_{DD}\\), so that current from \\(M_1\\) is turned into a large output voltage swing.\n- \\(M_2\\) (common‑gate) shields node \\(X\\), making its voltage nearly constant; this both increases output resistance and greatly reduces Miller effect on \\(M_1\\).\n\nSo the circuit is a single‑ended cascode gain stage: high gain, high output resistance, and improved high‑frequency behavior compared with a simple common‑source stage.",
        "format": "markdown",
        "sha256": "873b70fb7b1d2ada210ccfedd9724713375da06205a2be4e8d65494b1c36027e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the accepted ideal-load gain approximation −gm1 gm2 ro1 ro2. The golden solution explicitly allows omitting body effect.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 14198,
        "total_tokens": 14842,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 14198,
        "total_tokens": 14842,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common‑source (CS) amplifier with an NMOS cascode device and a current‑source load.**\n\n---\n\n### 1. DC operation\n\n- \\(I_1\\) is an (ideally) constant current source, so in steady state  \n\n  \\[\n  I_{D1}=I_{D2}=I_1\n  \\]\n\n- Both transistors must be in saturation:\n\n  \\[\n  \\begin{aligned}\n  \\text{M1: } & V_X \\ge V_{OV1}=V_{GS1}-V_{TH1} \\\\\n  \\text{M2: } & V_{OUT}-V_X \\ge V_{GS2}-V_{TH2}=V_{OV2}\n  \\end{aligned}\n  \\]\n\n- With a suitably chosen bias \\(V_{b1}\\), the source of M2 (node \\(X\\)) is approximately\n\n  \\[\n  V_X \\approx V_{b1}-V_{OV2}\n  \\]\n\nand \\(V_{GS1}\\) (hence \\(v_{in}\\)) is chosen so that M1 also carries \\(I_1\\) in saturation.\n\n---\n\n### 2. Small‑signal model\n\nLet \\(g_{m1},g_{m2}\\) be the transconductances and \\(r_{o1},r_{o2}\\) the output resistances of M1, M2.  \nThe current source \\(I_1\\) is ideal, so in small‑signal it is an open circuit.\n\n#### Gain to node \\(X\\)\n\nWriting KCL at node \\(X\\) and using the small‑signal saturation model,\n\n\\[\ni_{d1}=g_{m1}v_{in}+\\frac{v_X}{r_{o1}}\n\\]\n\nand, after using the node‑\\(v_{out}\\) equation (see next section), one obtains\n\n\\[\nv_X =-g_{m1}r_{o1} \\, v_{in}\n\\]\n\nSo node \\(X\\) behaves exactly like the drain of a simple CS stage with load \\(r_{o1}\\).\n\n#### Gain from node \\(X\\) to \\(v_{out}\\)\n\nAt node \\(v_{out}\\) (no load, current source open):\n\n\\[\n\\frac{v_{out}-v_X}{r_{o2}}-g_{m2}v_X=0\n\\]\n\ngiving\n\n\\[\nv_{out}=v_X(1+g_{m2}r_{o2})\n\\]\n\nTherefore\n\n\\[\n\\boxed{\\displaystyle\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n  = -g_{m1}r_{o1}\\left(1+g_{m2}r_{o2}\\right)\n}\n\\]\n\nIf \\(g_{m2}r_{o2} \\gg 1\\),\n\n\\[\nA_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n\\]\n\nwhich is much larger than the gain of a single CS stage (\\(-g_{m1}r_{o1}\\)).\n\n---\n\n### 3. Output resistance\n\nSet \\(v_{in}=0\\) and apply a test voltage \\(v_t\\) at \\(v_{out}\\). Solving the small‑signal node equations gives the resistance seen at \\(v_{out}\\):\n\n\\[\n\\boxed{\\displaystyle\nR_{out}= r_{o2}+r_{o1}+g_{m2}r_{o1}r_{o2}\n    = r_{o2}\\bigl(1+g_{m2}r_{o1}\\bigr)+r_{o1}\n}\n\\]\n\nFor \\(g_{m2}r_{o1} \\gg 1\\),\n\n\\[\nR_{out} \\approx g_{m2}r_{o1}r_{o2}\n\\]\n\nso the cascode device M2 boosts the output resistance—and hence the voltage gain—by approximately the factor \\(g_{m2}r_{o2}\\).\n\n---\n\n### 4. Input resistance\n\nThe gate of M1 draws negligible dc/small‑signal current, so\n\n\\[\nR_{in} \\approx \\infty\n\\]\n\n(ignoring capacitances).\n\n---\n\n**Summary**\n\n- The circuit is a CS amplifier (M1) with a cascode transistor (M2) and current‑source load.\n- Small‑signal voltage gain:\n\n  \\[\n  A_v = -g_{m1}r_{o1}\\left(1+g_{m2}r_{o2}\\right)\n      \\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n  \\]\n\n- Output resistance:\n\n  \\[\n  R_{out}=r_{o2}+r_{o1}+g_{m2}r_{o1}r_{o2}\n          \\approx g_{m2}r_{o1}r_{o2}\n  \\]\n\n- Input resistance is very large.\n\nM2 (the cascode device) keeps the drain of M1 nearly at a fixed voltage, greatly increasing the output resistance and overall gain of the stage.",
        "format": "markdown",
        "sha256": "5718460392f7ea4a713dca128b7b19362abbc4b59837ec44d4730d69005d04dc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly analyzes M1 as the common-source input and M2 as the NMOS cascode, deriving the ideal-current-source-load gain equivalent to the golden result (with body effect omitted, as allowed). The output-resistance analysis is also consistent.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 13524,
        "total_tokens": 14168,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12413,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 13524,
        "total_tokens": 14168,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12413,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common‑source NMOS stage with an NMOS cascode device (M2) and a current‑source load**.  \nAssume both transistors operate in saturation.\n\n---\n\n### 1. Small–signal model\n\nLet\n\n- \\(g_{m1}, r_{o1}\\) – transconductance and output resistance of \\(M_1\\)\n- \\(g_{m2}, r_{o2}\\) – transconductance and output resistance of \\(M_2\\)\n- The bias current source \\(I_1\\) is ideal → its small–signal resistance \\(\\to \\infty\\).\n\nThe gate of \\(M_2\\) is at DC bias \\(V_{b1}\\), so for AC it is **at ground**.\n\n---\n\n### 2. Node equations\n\nLet the small‑signal voltages at node \\(X\\) and the output be \\(v_x\\) and \\(v_o\\).\n\nAt node \\(v_o\\):\n\\[\n\\frac{v_o-v_x}{r_{o2}}-g_{m2}v_x=0\n\\quad\\Rightarrow\\quad\nv_o=v_x(1+g_{m2}r_{o2}) \\tag{1}\n\\]\n\nAt node \\(v_x\\):\n\\[\n\\frac{v_x}{r_{o1}}+g_{m1}v_{in}+\\frac{v_x-v_o}{r_{o2}}+g_{m2}v_x=0\n\\]\n\nUsing (1), \\(v_x-v_o=-g_{m2}r_{o2}v_x\\), so the last two terms cancel and we get\n\\[\n\\frac{v_x}{r_{o1}}+g_{m1}v_{in}=0\n\\quad\\Rightarrow\\quad\nv_x=-g_{m1}r_{o1}v_{in} \\tag{2}\n\\]\n\n---\n\n### 3. Voltage gain\n\nFrom (1) and (2):\n\\[\nA_v \\equiv \\frac{v_o}{v_{in}}\n= -g_{m1}r_{o1}(1+g_{m2}r_{o2})\n\\]\n\nIf \\(g_{m2}r_{o2} \\gg 1\\),\n\\[\nA_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n\\]\n\nNode‑\\(X\\) gain:\n\\[\n\\frac{v_x}{v_{in}}=-g_{m1}r_{o1}\n\\]\n\nGain from node \\(X\\) to output:\n\\[\n\\frac{v_o}{v_x}=1+g_{m2}r_{o2}\\approx g_{m2}r_{o2}\n\\]\n\n---\n\n### 4. Output resistance\n\nTo find \\(R_{out}\\), set \\(v_{in}=0\\), apply a test voltage \\(v_t\\) at \\(v_o\\), and compute \\(i_t\\).\n\nSolving with \\(v_{in}=0\\) gives\n\\[\nR_{out}=\\frac{v_t}{i_t}\n= r_{o2}+r_{o1}+g_{m2}r_{o1}r_{o2}\n\\approx g_{m2}r_{o1}r_{o2}\n\\quad (g_{m2}r_{o2}\\gg 1)\n\\]\n\n---\n\n### 5. Key points\n\n- The circuit is a **cascode amplifier**.\n- \\(M_1\\) provides transconductance \\(g_{m1}\\).\n- \\(M_2\\) (with its gate fixed at \\(V_{b1}\\)) greatly **boosts output resistance** to\n  \\(R_{out} \\approx g_{m2}r_{o1}r_{o2}\\), giving a high gain.\n- Node \\(X\\) sees almost constant voltage compared with \\(v_o\\) (by factor \\(\\approx 1/(g_{m2}r_{o2})\\)), keeping \\(M_1\\) in saturation and improving gain and linearity.",
        "format": "markdown",
        "sha256": "b58ab8d8d06337a644eadad20d547892cf90083d32fe37991e4059f0e459a1e0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode. Under the stated ideal current-source load, it derives the equivalent gain expression, omitting body effect as permitted by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8411,
        "total_tokens": 9055,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7523,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8411,
        "total_tokens": 9055,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7523,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes.  \n\nTransistors M1 and M2 form a cascode pair:\n\n- M1 is a common‑source device (source at AC ground, gate driven by \\(V_{in}\\)).\n- M2 is a common‑gate device (gate biased at the fixed voltage \\(V_{b1}\\), thus at AC ground), placed in series above M1.\n\nThis CS + CG stacking is exactly the definition of a cascode structure; \\(R_D\\) is just the load resistor connected to the cascode’s output.",
        "format": "markdown",
        "sha256": "b828c6f4bc58d7ebfaf013ed630c1655d0ec8a493ab9f3ee2299776efd013a27"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a common-source device; M1 is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 1545,
        "total_tokens": 2193,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 1545,
        "total_tokens": 2193,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes.\n\nM1 is a common‑source transistor (gate = \\(V_{in}\\), source at ground).  \nM2 has its gate biased at a fixed voltage \\(V_{b1}\\) (AC‑ground) and its source connected to M1’s drain, so it operates as a common‑gate device.  \n\nA common‑source device followed by a common‑gate device stacked like this is exactly a cascode structure; \\(R_D\\) is just the load for the cascode.",
        "format": "markdown",
        "sha256": "ad6ac71e3ffc0e2e348440d9a454b6feea8d3db8b95371c6b9e91e113f964098"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower, not a common-source stage, so the structure lacks the cascode resistance boost.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 2208,
        "total_tokens": 2856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2099,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 2208,
        "total_tokens": 2856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2099,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes.  \n\nThis circuit is a **MOS cascode amplifier**:\n\n- \\(M_1\\) is a common‑source transistor driven by \\(V_{in}\\).\n- \\(M_2\\) is stacked above it with its gate biased at a fixed voltage \\(V_{b1}\\), so for small signals its gate is at AC ground → a **common‑gate** device.\n- The drain of \\(M_1\\) is connected to the source of \\(M_2\\); both devices carry the same current and the output is taken at the drain of \\(M_2\\).\n\nA common‑source stage followed by a common‑gate stage in this vertical, current‑sharing arrangement is exactly what is meant by a cascode structure, regardless of whether the load at the top is a resistor or a current source.",
        "format": "markdown",
        "sha256": "38cb26986718913db682b4378d2f8c03d2b22119b7f0b2ca87587f2ebabfac3c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1. M1 is a PMOS source follower, not a common-source stage, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 948,
        "total_tokens": 1596,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 772,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 948,
        "total_tokens": 1596,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 772,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In a cascode, the Miller effect is small because the voltage **across** the gate–drain capacitance of the input transistor never gets very large.\n\nCompare two cases.\n\n---\n\n### 1. Single common‑source stage (big Miller effect)\n\nFor a single MOSFET/BJT voltage amplifier:\n\n- There is a gate–drain (or base–collector) capacitance \\(C_{gd}\\) (or \\(C_{bc}\\)).\n- The input is at the gate; the output is at the drain.\n- The small-signal gain from gate to drain is large in magnitude, \\(|A_v| \\gg 1\\).\n\nBecause of that, any small change at the input causes a large opposite change at the drain, so the voltage across \\(C_{gd}\\) sees nearly the full gain. This gives a large “Miller-multiplied” input capacitance:\n\n\\[\nC_{in} \\approx C_{gs} + C_{gd}(1 - A_v)\n\\]\n\nWith \\(A_v \\approx -10\\) (for example), the effective contribution of \\(C_{gd}\\) at the input becomes about \\(11 C_{gd}\\). This Miller‑multiplied capacitance limits bandwidth.\n\n---\n\n### 2. Cascode: common‑source + common‑gate (small Miller effect)\n\nIn a cascode, you stack two transistors:\n\n- Bottom device: common‑source (or common‑emitter) input transistor.\n- Top device: common‑gate (or common‑base) cascode transistor, whose gate/base is held at a fixed bias.\n\nKey point:  \nThe **drain of the input transistor** (the node between the two transistors) sees only a *small* AC voltage swing. The cascode transistor keeps that node at nearly constant voltage:\n\n- For small signals, the gain from the input gate to this middle node is close to 1 (or even less), not large like a standalone amplifier’s gain.\n- So the voltage between the gate and drain of the input transistor (across \\(C_{gd1}\\)) does *not* change much with input.\n\nMathematically, for the bottom transistor:\n\n\\[\nA_{v,\\text{gate→drain}} \\approx 1 \\quad \\Rightarrow \\quad C_{in} \\approx C_{gs1} + C_{gd1}(1 - A_v) \\approx C_{gs1} + \\text{(small)}\n\\]\n\nBecause the gain between gate and drain is near 1, the multiplication factor \\(1 - A_v\\) is close to zero, so \\(C_{gd1}\\) contributes very little to input capacitance.\n\n---\n\n### Intuitive summary\n\n- Miller effect is large when there is a **large gain** between the two terminals of the capacitance.\n- In a cascode, the cascode (common‑gate/base) device holds the drain/collector of the input device at nearly constant AC potential.\n- Therefore, there is **little AC voltage across** the gate–drain (or base–collector) capacitance of the input device.\n- Low voltage across that capacitance → little Miller multiplication → much smaller effective input capacitance → higher bandwidth.\n\nThat is why the Miller effect is much less pronounced in a cascode configuration.",
        "format": "markdown",
        "sha256": "90b261013529e0e104b63b3cf4cf701d212f38b95c4648d3180fe0fa84ce803f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the cascode’s low-impedance intermediate node and the reduced Miller effect, but treats the gate-to-drain gain as approximately +1. It is about −1 for similar devices, so the voltage across Cgd is roughly twice the input swing and its Miller contribution is reduced, not negligible.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1078,
        "total_tokens": 1097,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 391,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1078,
        "total_tokens": 1097,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 391,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect depends on **how much gain exists across a capacitor**.  \nA cascode is arranged specifically to make that gain small for the input device, so the Miller multiplication is much weaker.\n\n---\n\n### 1. Miller effect in a single common‑source/common‑emitter stage\n\nTake a simple common‑source MOSFET amplifier with load \\(R_D\\):\n\n- There is a parasitic capacitance \\(C_{gd}\\) between gate and drain.\n- The small‑signal gain from gate to drain is roughly\n  \\[\n  A_v \\approx -g_m R_D\n  \\]\n  which can have a large magnitude (e.g. \\(|A_v| = 10\\)–50).\n\nBy Miller’s theorem, that capacitor looks at the input like an enlarged capacitor:\n\\[\nC_{\\text{in,eff}} \\approx C_{gs} + C_{gd}(1 - A_v)\n\\]\nSince \\(A_v\\) is a large negative number, \\(1 - A_v \\approx 1 + |A_v|\\), so:\n\\[\nC_{\\text{in,eff}} \\approx C_{gs} + (1 + |A_v|)\\,C_{gd}\n\\]\nThus \\(C_{gd}\\) is “Miller‑multiplied” by the large gain, which badly hurts bandwidth.\n\n(Same story for a BJT: \\(C_\\mu\\), the base–collector capacitance, is Miller‑multiplied by the CE gain.)\n\n---\n\n### 2. What changes in a cascode\n\nIn a cascode, you stack a **common‑gate/common‑base device** on top of the input device:\n\n- Bottom transistor: common‑source/common‑emitter (provides \\(g_m\\), the transconductance).\n- Top transistor: common‑gate/common‑base (the “cascode” device).\n\nThe key node is the **drain/collector of the bottom device**, which:\n\n- Is connected to the **source/emitter of the cascode device**.\n- Sees a **low AC impedance** (≈ \\(1/g_{m,\\text{cascode}}\\)).\n- Therefore experiences only a **small voltage swing**.\n\nThat is exactly the node on the “output side” of the bottom device’s gate–drain (or base–collector) capacitance, \\(C_{gd1}\\) or \\(C_{\\mu1}\\).\n\nSo the relevant gain for Miller is now the gain from the gate/base of the bottom transistor to its *own* drain/collector node, not the overall output gain:\n\n\\[\nA_{v,\\text{gate→drain of bottom}} \\approx -g_{m1} \\left( r_{o1} \\parallel \\frac{1}{g_{m2}} \\right)\n\\]\n\nWith a strong cascode transistor (\\(g_{m2}\\) large), the dominant impedance is \\(1/g_{m2}\\), so:\n\\[\nA_{v,\\text{gate→drain of bottom}} \\approx -\\frac{g_{m1}}{g_{m2}} \\quad \\text{(often ≈ −1 or smaller in magnitude)}\n\\]\n\nNow apply Miller to \\(C_{gd1}\\):\n\n\\[\nC_{\\text{in,eff}} \\approx C_{gs1} + C_{gd1}\\,\\bigl(1 - A_{v,\\text{gate→drain}}\\bigr)\n\\]\n\nIf \\(A_{v,\\text{gate→drain}} \\approx -1\\), the Miller factor is:\n\\[\n1 - (-1) = 2\n\\]\nSo \\(C_{gd1}\\) is only doubled, instead of being multiplied by 10–50 as in a simple common‑source stage.\n\nCrucially:\n\n- The **large overall voltage gain** now occurs **from the cascode’s source to its drain**, where the gate/base of the input transistor is **not directly connected by a large capacitance**.\n- The sensitive input node “sees” only a **small gain** to the other side of its parasitic capacitor, so Miller multiplication is small.\n\n---\n\n### 3. Summary in words\n\n- Miller effect enlarges a capacitor by a factor \\(1 - A_v\\), where \\(A_v\\) is the gain between the two nodes of that capacitor.\n- In a plain common‑source/common‑emitter stage, \\(A_v\\) at the drain/collector is large in magnitude, so the gate–drain (or base–collector) capacitance blows up at the input.\n- In a cascode, the cascode device holds the drain/collector of the input transistor at nearly constant voltage (low AC swing), so the gain from input to that node is small.\n- Because the gain across the input transistor’s feedback capacitor is small, the Miller effect is much less pronounced, and the input capacitance stays low, giving much better high‑frequency performance.",
        "format": "markdown",
        "sha256": "91c2ac8af0f4b4e2751a03f59cbd847fc47c8aa526d06b8a4625b407f55b3278"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode source node and derives a gate-to-drain gain near −1, so Cgd is multiplied by about 2 rather than the full stage gain. The “nearly constant” wording slightly overstates the effect, but the quantitative explanation makes clear it is not eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2624,
        "total_tokens": 2643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2624,
        "total_tokens": 2643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect comes from a capacitance that is connected between two nodes with a **large voltage gain** between them. The classic case is \\(C_{gd}\\) (or \\(C_{bc}\\)) between input and output of a common‑source/common‑emitter stage.\n\n---\n\n### 1. Miller effect in a single common-source/emitter stage\n\nFor a single transistor amplifier, with a capacitance \\(C\\) between input and output:\n\n- Let \\(A_v\\) be the small‑signal gain from input to output.\n- Miller’s theorem says the equivalent input capacitance is  \n  \\[\n  C_\\text{in,eq} = C (1 - A_v)\n  \\]\n- For a high‑gain stage, \\(A_v \\approx -10, -20, ...\\), so  \n  \\[\n  C_\\text{in,eq} \\approx C (1 + |A_v|) \\quad \\text{(very large)}\n  \\]\n  \nSo a small physical capacitance (e.g. \\(C_{gd}\\)) looks like a much bigger capacitance at the input and severely limits bandwidth.\n\n---\n\n### 2. What changes in a cascode\n\nIn a cascode (common‑source feeding a common‑gate, or common‑emitter feeding a common‑base):\n\n- The **input transistor’s drain/collector node** is connected to the **source/emitter of the upper (cascode) transistor**.\n- The gate/base of the cascode transistor is at AC ground (biased but bypassed), so the cascode transistor keeps its source/emitter node at **almost constant AC voltage** (low‑impedance node).\n\nThis has two key consequences:\n\n#### (a) Small gain from input gate/base to that node\n\nCall the input transistor M1 and its drain node \\(v_x\\). In a cascode, because \\(v_x\\) is held nearly constant by the common‑gate/common‑base device (M2):\n\n- The gain \\(A_{v1} = v_x / v_{in}\\) is **small**, on the order of \\(-1\\) or less, not \\(-10, -20\\), etc.\n  - For MOS, typically \\(A_{v1} \\approx -g_{m1} / g_{m2} \\approx -1\\) if the devices are similar.\n- Therefore, the effective input capacitance due to \\(C_{gd1}\\) is\n  \\[\n  C_{\\text{in,eq}} \\approx C_{gd1} (1 - A_{v1}) \\approx C_{gd1} (1 - (-1)) = 2C_{gd1}\n  \\]\n  which is only about **2×**, not 10–20× or more.\n\n#### (b) Little voltage across \\(C_{gd1}\\)\n\nEquivalently: the Miller multiplication occurs because there is a **large varying voltage across the capacitance**. In a cascode:\n\n- One terminal of \\(C_{gd1}\\) is the gate of M1 (the input), which swings.\n- The other terminal is the drain of M1 / source of M2, which is held almost constant.\n- So the voltage across \\(C_{gd1}\\), \\(v_{gd1}\\), does **not** change very much.\n- With little AC voltage across \\(C_{gd1}\\), its current is small, and it does not reflect as a large input capacitance.\n\n---\n\n### 3. What about the cascode transistor’s own Miller effect?\n\nThe upper transistor (M2) has its own \\(C_{gd2}\\) (or \\(C_{bc2}\\)) between gate/base and drain/collector. But:\n\n- The gate/base of M2 is at **AC ground**, and\n- The gain from this node to the output is high,\n- So yes, \\(C_{gd2}\\) is Miller‑multiplied, but it appears mainly at the **cascode gate/base node**, which is a **low‑impedance bias node**, not the external input.\n\nThus, the **input** node doesn’t see a large Miller‑boosted capacitance.\n\n---\n\n### Summary\n\nThe Miller effect is less pronounced in a cascode because the cascode transistor keeps the drain/collector of the input transistor at (approximately) constant AC voltage, so:\n\n- The gain from input to that node is small.\n- The voltage across the input transistor’s feedback capacitance (\\(C_{gd}\\) or \\(C_{bc}\\)) is small.\n- Therefore the effective input capacitance is only slightly larger than the physical capacitance, not multiplied by the full stage gain.\n\nThis is why cascodes have much higher bandwidth than a single high‑gain common‑source/emitter stage.",
        "format": "markdown",
        "sha256": "2c197409d7fcc76200b52414774b1441a89352ff524c2040feb2beb9b98b80fc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the low-impedance cascode node, the roughly −1 gain, and the resulting ~2× Miller factor. However, it repeatedly says the node and Cgd voltage are nearly constant or small; the voltage across Cgd is about twice the input swing, so that explanation overstates the reduction.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2074,
        "total_tokens": 2093,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1075,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2074,
        "total_tokens": 2093,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1075,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **single‑stage CMOS inverting amplifier** (a common‑source NMOS with a PMOS current‑source load).\n\nAssume long‑channel devices, body tied to source, and that the bias voltages \\(V_{b1},V_{b2}\\) are DC (AC ground).\n\n---\n\n### 1. DC operation\n\n- **M2** is an NMOS:\n  - Source at \\(V_{b1}\\)\n  - Gate at \\(V_{in}\\)\n  - Drain at \\(V_{out}\\)\n\n- **M1** is a PMOS load:\n  - Source at \\(V_{DD}\\)\n  - Gate at \\(V_{b2}\\)\n  - Drain at \\(V_{out}\\)\n\nFor both in saturation:\n\n\\[\n\\begin{aligned}\n\\text{M2 (NMOS):}&\\quad V_{out} \\ge V_{in} - V_{tn} \\\\\n\\text{M1 (PMOS):}&\\quad V_{out} \\le V_{b2} + |V_{tp}|\n\\end{aligned}\n\\]\n\nThe drain currents (ignoring channel‑length modulation):\n\n\\[\n\\begin{aligned}\nI_{D1} &= \\frac{1}{2}\\beta_p (V_{DD}-V_{b2}-|V_{tp}|)^2 \\\\\nI_{D2} &= \\frac{1}{2}\\beta_n (V_{in}-V_{b1}-V_{tn})^2\n\\end{aligned}\n\\]\n\nSince they are in series: \\(I_{D1}=I_{D2}=I\\).  \nThis relation between \\(V_{in}\\), \\(V_{b1}\\), \\(V_{b2}\\), device sizes and thresholds sets the quiescent current and (through channel‑length modulation) the quiescent \\(V_{out}\\).\n\n---\n\n### 2. Small‑signal gain\n\nSmall‑signal parameters at the bias point:\n\n- \\(g_{m2}\\) of M2, \\(r_{o2}\\) from drain to source\n- \\(g_{m1}\\) of M1, \\(r_{o1}\\) from drain to source\n\nSince both gate and source of M1 are AC‑fixed, \\(v_{gs1}=0\\) in small signal ⇒ M1 contributes only \\(r_{o1}\\) (no \\(g_m\\) term). M2 is a common‑source device with its source at AC ground.\n\nSmall‑signal circuit at node \\(v_{out}\\):\n\n- \\(r_{o1}\\) from \\(v_{out}\\) to AC ground\n- \\(r_{o2}\\) from \\(v_{out}\\) to AC ground\n- current source \\(g_{m2} v_{in}\\) from drain to source (from \\(v_{out}\\) to ground)\n\nKCL at \\(v_{out}\\):\n\n\\[\n\\frac{v_{out}}{r_{o1}} + \\frac{v_{out}}{r_{o2}} + g_{m2} v_{in} = 0\n\\]\n\nThus:\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n  = -g_{m2}\\left(r_{o1}\\parallel r_{o2}\\right)\n\\]\n\nSo the stage is inverting; its gain magnitude is approximately\n\n\\[\n|A_v| \\approx g_{m2} (r_{o1} \\parallel r_{o2})\n\\]\n\n---\n\n### 3. Input, output resistances and swing\n\n- **Input resistance** \\(R_{in}\\): essentially infinite (MOS gate).\n- **Output resistance** (with \\(v_{in}=0\\)):  \n  \\(R_{out} \\approx r_{o1} \\parallel r_{o2}\\).\n\n- **Usable output swing** (keeping both devices in saturation, around the bias point):\n\n\\[\nV_{in} - V_{tn} \\;\\le\\; V_{out} \\;\\le\\; V_{b2} + |V_{tp}|\n\\]\n\n(plus some margin for small‑signal variation).\n\n---\n\nIn summary, the circuit is a biasable CMOS inverter used as an analog **common‑source amplifier**: M2 provides transconductance, M1 acts as an active load (approximate current source), giving gain \\(-g_{m2}(r_{o1}\\parallel r_{o2})\\).",
        "format": "markdown",
        "sha256": "94cab956b93b78cc0471cd9f1bdaee84dbda6a97020ddee19d7d3d10caf23b78"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and identifies a common-source inverting amplifier. The circuit is instead a common-gate stage with Vin at M2’s source; the golden solution explicitly assigns 0 for this topology error.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 5051,
        "total_tokens": 5695,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4101,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 5051,
        "total_tokens": 5695,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4101,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common–source CMOS gain stage**:  \n- \\(M_2\\) is the amplifying nMOS.  \n- \\(M_1\\) is a pMOS current‑source load, biased by \\(V_{b2}\\).  \n- \\(V_{b1}\\) fixes the source potential of \\(M_2\\).\n\nAssume long‑channel devices, body tied to source, and both transistors biased in saturation.\n\n---\n\n### 1. DC (large‑signal) operation\n\nLet the drain current of both devices be \\(I_D\\).\n\nFor \\(M_1\\) (pMOS):\n\n\\[\nV_{SG1}=V_{DD}-V_{b2},\\quad\nV_{\\text{ov1}} = V_{SG1}-|V_{tp}| = V_{DD}-V_{b2}-|V_{tp}|\n\\]\n\n\\[\nI_D \\approx \\frac{\\beta_{p1}}{2} V_{\\text{ov1}}^2\n\\]\n\nFor \\(M_2\\) (nMOS):\n\n\\[\nV_{GS2}=V_{in}-V_{b1},\\quad\nV_{\\text{ov2}} = V_{GS2}-V_{tn}=V_{in}-V_{b1}-V_{tn}\n\\]\n\n\\[\nI_D \\approx \\frac{\\beta_{n2}}{2} V_{\\text{ov2}}^2\n\\]\n\nEquating the currents:\n\n\\[\n\\frac{\\beta_{p1}}{2} (V_{DD}-V_{b2}-|V_{tp}|)^2\n= \n\\frac{\\beta_{n2}}{2} (V_{in}-V_{b1}-V_{tn})^2 = I_D\n\\]\n\nThus, for chosen sizes and biases \\(V_{b1},V_{b2}\\), the quiescent current \\(I_D\\) is fixed.\n\n**Saturation / signal range**\n\nFor proper operation both devices must stay in saturation:\n\n- \\(M_1\\) (pMOS):\n\n  \\[\n  V_{SD1} \\ge V_{SG1}-|V_{tp}| \\Rightarrow \n  V_{DD}-V_{out} \\ge V_{\\text{ov1}} \\Rightarrow\n  V_{out} \\le V_{DD}-V_{\\text{ov1}} = V_{b2}+|V_{tp}|\n  \\]\n\n- \\(M_2\\) (nMOS):\n\n  \\[\n  V_{DS2} \\ge V_{GS2}-V_{tn} = V_{\\text{ov2}}\n  \\Rightarrow V_{out}-V_{b1} \\ge V_{\\text{ov2}}\n  \\Rightarrow V_{out} \\ge V_{b1}+V_{\\text{ov2}}\n  \\]\n\nSo the usable output swing is approximately\n\n\\[\nV_{b1}+V_{\\text{ov2}} \\le V_{out} \\le V_{DD}-V_{\\text{ov1}}\n\\]\n\nand the input must satisfy \\(V_{GS2}\\ge V_{tn}\\), i.e.\n\n\\[\nV_{in} \\ge V_{b1}+V_{tn}.\n\\]\n\n---\n\n### 2. Small‑signal analysis\n\nFor AC, \\(V_{DD},V_{b1},V_{b2}\\) are AC grounds.\n\n- \\(M_1\\): gate and source at AC ground → its \\(g_{m1}\\) term is zero; only its output resistance \\(r_{o1}\\) connects the output node to ground.\n- \\(M_2\\): a common‑source nMOS with \\(g_{m2}\\) and \\(r_{o2}\\), gate driven by \\(v_{in}\\), drain at \\(v_{out}\\), source at AC ground.\n\nNodal equation at \\(v_{out}\\):\n\n\\[\n\\frac{v_{out}}{r_{o1}} + \\frac{v_{out}}{r_{o2}} + g_{m2}v_{in} = 0\n\\]\n\nHence the **voltage gain** is\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n= -g_{m2}\\left(r_{o1} \\parallel r_{o2}\\right)\n\\]\n\nIf \\(r_{o1} \\gg r_{o2}\\), then \\(A_v \\approx -g_{m2} r_{o2}\\);  \nif \\(r_{o2} \\gg r_{o1}\\), then \\(A_v \\approx -g_{m2} r_{o1}\\).\n\n**Input resistance**\n\nMOS gate is insulated → \\(R_{in} \\approx \\infty\\) (neglecting leakage).\n\n**Output resistance**\n\nSet \\(v_{in}=0\\). Then \\(M_2\\) contributes only \\(r_{o2}\\), and the small‑signal resistance seen at \\(v_{out}\\) is\n\n\\[\nR_{out} = r_{o1} \\parallel r_{o2}.\n\\]\n\n---\n\nIn words, the circuit is an **inverting voltage amplifier (common‑source stage) with a pMOS current‑source load**, widely used as the gain stage in CMOS analog ICs. The biases \\(V_{b1}\\) and \\(V_{b2}\\) set the quiescent current and allowable signal swing.",
        "format": "markdown",
        "sha256": "231fdfdd478c4e83783293e298722d1a4669ec7c0f9a716939de0b9a738da54b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and identifies a common-source stage. The circuit is a common-gate stage with Vin at M2’s source, so the claimed inverting gain and high input resistance contradict the essential topology.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 7169,
        "total_tokens": 7813,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6015,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 7169,
        "total_tokens": 7813,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6015,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Interpret the circuit as follows  \n\n- \\(M_2\\): n‑MOS, gate driven by \\(V_{in}\\), source biased at a fixed DC voltage \\(V_{b1}\\).  \n- \\(M_1\\): p‑MOS, source at \\(V_{DD}\\), drain at the output node, gate biased at \\(V_{b2}\\).  \n\n\\(V_{b1}\\) and \\(V_{b2}\\) are DC bias voltages (AC‑grounded).\n\nSo this is a **common‑source amplifier with a PMOS current‑source load**.\n\n---\n\n### 1. DC operation\n\nAssume long‑channel devices and operation in saturation unless noted.\n\nFor \\(M_1\\) (p‑MOS, source at \\(V_{DD}\\))  \n\n\\[\nI_{D1} \\approx \\frac{1}{2}\\beta_p (V_{SG1}-|V_{TP}|)^2,\n\\qquad \nV_{SG1}=V_{DD}-V_{b2}\n\\]\n\nwhich is (approximately) a constant current \\(I_0\\) set by \\(V_{b2}\\).\n\nFor \\(M_2\\) (n‑MOS, source at \\(V_{b1}\\))  \n\n\\[\nV_{GS2}=V_{in}-V_{b1}\n\\]\n\nIf \\(V_{in} \\le V_{b1}+V_{TN}\\) then \\(M_2\\) is OFF; the output node rises to \\(V_{DD}\\) and \\(I_D\\approx0\\).\n\nWhen \\(V_{in}>V_{b1}+V_{TN}\\), \\(M_2\\) conducts. If it is in saturation\n\n\\[\nI_{D2} \\approx \\frac{1}{2}\\beta_n (V_{in}-V_{b1}-V_{TN})^2\n\\]\n\nThe output DC current is determined by KCL at the output node:\n\n\\[\nI_{D1} = I_{D2}\n\\]\n\nso\n\n\\[\nI_0 = \\frac{1}{2}\\beta_n (V_{in}-V_{b1}-V_{TN})^2\n\\]\n\nThis equation sets the quiescent current \\(I_0\\) (via \\(V_{b2}\\)) or, equivalently, the bias value of \\(V_{in}\\) that gives a desired current.\n\n#### Region limits (keeping both devices in saturation)\n\nLet the n‑MOS overdrive be \\(V_{OV2}=V_{GS2}-V_{TN}=V_{in}-V_{b1}-V_{TN}\\)   \nand the p‑MOS overdrive \\(V_{OV1}=V_{SG1}-|V_{TP}|\\).\n\nSaturation conditions:\n\n- n‑MOS: \\(V_{DS2} \\ge V_{OV2} \\Rightarrow V_{out}-V_{b1} \\ge V_{OV2}\\)  \n  ⇒ **lower limit** on \\(V_{out}\\): \\(V_{out} \\ge V_{b1}+V_{OV2}\\)\n\n- p‑MOS: \\(V_{SD1} \\ge V_{OV1} \\Rightarrow V_{DD}-V_{out} \\ge V_{OV1}\\)  \n  ⇒ **upper limit** on \\(V_{out}\\): \\(V_{out} \\le V_{DD}-V_{OV1}\\)\n\nThus with both transistors in saturation the allowed output swing is\n\n\\[\nV_{b1}+V_{OV2} \\;\\le\\; V_{out} \\;\\le\\; V_{DD}-V_{OV1}\n\\]\n\nIf \\(V_{out}\\) rises above \\(V_{DD}-V_{OV1}\\), \\(M_1\\) enters triode; if it falls below \\(V_{b1}+V_{OV2}\\), \\(M_2\\) enters triode. In either case the stage is saturated and the gain collapses.\n\n---\n\n### 2. Small‑signal (AC) analysis\n\nBias supplies \\(V_{DD}\\), \\(V_{b1}\\), \\(V_{b2}\\) are AC grounds.\n\n- Gate of \\(M_1\\) at AC ground; source of \\(M_1\\) at AC ground (\\(V_{DD}\\)).  \n  ⇒ Small‑signal \\(v_{sg1}=0\\); \\(M_1\\) contributes only its output resistance \\(r_{o1}\\) to the node.\n\n- For \\(M_2\\): source is at AC ground (\\(V_{b1}\\)); gate sees \\(v_{in}\\).  \n  ⇒ Small‑signal \\(v_{gs2}=v_{in}\\); drain at \\(v_{out}\\).\n\nSmall‑signal parameters (at the bias current \\(I_0\\)):\n\n\\[\ng_{m2} = \\frac{2I_0}{V_{OV2}}, \\quad\nr_{o1}\\approx\\frac{1}{\\lambda_p I_0}, \\quad\nr_{o2}\\approx\\frac{1}{\\lambda_n I_0}\n\\]\n\nThe small‑signal output node sees \\(r_{o1}\\) to \\(V_{DD}\\) in parallel with \\(r_{o2}\\) to \\(V_{b1}\\).\n\nHence\n\n- **Voltage gain**\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n   \\approx -g_{m2} (r_{o1} \\parallel r_{o2})\n\\]\n\n(negative sign: it is a common‑source, inverting stage).\n\n- **Input resistance**: essentially infinite (MOS gate).  \n\n- **Output resistance (looking into Vout with input AC‑grounded)**\n\n\\[\nR_{out} \\approx r_{o1} \\parallel r_{o2}\n\\]\n\n---\n\n### 3. Functional description\n\n- When \\(V_{in}\\) is low (\\(<V_{b1}+V_{TN}\\)): \\(M_2\\) off, \\(V_{out}\\approx V_{DD}\\).  \n- When \\(V_{in}\\) is high enough to turn \\(M_2\\) on: current flows through \\(M_2\\) equal to the bias current set by \\(M_1\\); the output drops.  \n- Around the bias point, the circuit behaves as a high‑gain inverting amplifier with gain \\(-g_{m2}(r_{o1}\\parallel r_{o2})\\).\n\nSo, the circuit is a common‑source MOS amplifier with a current‑source (PMOS) load and level‑shifted source at \\(V_{b1}\\).",
        "format": "markdown",
        "sha256": "28b8528b0695de8303d8c0b5f60e36f397bc217889417aed1bf8f3bf8dd90d88"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at the gate of M2 and identifies a common-source stage, contradicting the essential common-gate topology; the golden solution explicitly assigns this error a score of 0.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8342,
        "total_tokens": 8986,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6929,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 8342,
        "total_tokens": 8986,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6929,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**.\n\nThere are only two independent dynamic nodes with capacitance:\n\n- The input gate node (with \\(C_{GS}\\) and \\(C_{GD}\\)).\n- The output/drain node (with \\(C_{GD}\\), \\(C_{GD2}\\), \\(C_{DB}\\), \\(C_{DB2}\\)).\n\nThe gate of \\(M_2\\) and the supply are at AC ground, so no additional independent state variables exist. Hence the transfer function is second order → **2 poles**.",
        "format": "markdown",
        "sha256": "fb50126d8aa1bd1afc6dad6c734b95e17ff866f6e69370ca8a067856ef8c0948"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent dynamic nodes—the M1 gate and output—and concludes there are two poles. CGD is described as connected to both nodes, not as an extra independent node.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 7689,
        "total_tokens": 8337,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7571,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 7689,
        "total_tokens": 8337,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7571,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **three poles**.\n\nReason: In small-signal, the gate of \\(M_2\\) is AC‑grounded, so the independent dynamic nodes are:\n\n1. The input gate node of \\(M_1\\) (with \\(C_{GS}\\) and \\(C_{GD}\\)).\n2. The intermediate/output node at the drain of \\(M_1\\) / source of \\(M_2\\) (with \\(C_{GD}\\), \\(C_{DB}\\), etc.).\n3. The drain node of \\(M_2\\) (with \\(C_{GD2}\\), \\(C_{DB2}\\)).\n\nEach high‑impedance node with capacitance contributes one pole, giving a third‑order (three‑pole) response.",
        "format": "markdown",
        "sha256": "5c7a00e84fefb25086b180b4bb7823befffcc3960154f1fd78835595f8bbe6e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The circuit has two poles, not three. The answer correctly recognizes the M1 gate as a dynamic node but incorrectly treats M2 as creating a separate output node; its source is AC-grounded and its drain is the output.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 9517,
        "total_tokens": 10165,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9351,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 9517,
        "total_tokens": 10165,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9351,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **three poles**.\n\nReason: there are three independent dynamic nodes (gate of M1, Vout node, and drain of M2). The capacitors at each node (with \\(C_{GD2}\\) in parallel with \\(C_{DB}\\) at Vout) give a third‑order RC network, hence three poles in the transfer function.",
        "format": "markdown",
        "sha256": "421a3e1c2585ee6f8708e88897ef4241e3a3b8569d702729ee0237141261be97"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The circuit has two poles, not three: the drain of M2 is the output node, so it is not a third independent dynamic node. The answer’s pole count and topology are therefore wrong.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 3849,
        "total_tokens": 4497,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3767,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 648,
        "output_tokens": 3849,
        "total_tokens": 4497,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3767,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is formed by two nMOS transistors in series with their **gates shorted to the input** \\(V_{in}\\).  \nThe drain of the upper device \\(M_2\\) is loaded by the resistor \\(R_D\\) to \\(V_{DD}\\); the output is taken at this node.\n\nLet the node between the two MOSFETs be \\(V_X\\).  \nAssume long‑channel devices and operation in saturation for signal analysis.\n\n---\n\n## 1. DC operation (both transistors in saturation)\n\nFor \\(V_{in} < V_{TH}\\): both MOSFETs are OFF, so \\(I_D \\approx 0\\) and  \n\n\\[\nV_{out} \\approx V_{DD}.\n\\]\n\nFor \\(V_{in} > V_{TH}\\) and with both devices in saturation (and neglecting channel‑length modulation),\n\n\\[\nI_D = \\frac{1}{2}k (V_{in}-V_{TH})^2,\n\\]\n\nwith \\(k=\\mu_n C_{ox}W/L\\) of either transistor (assuming they are identical).  \nThe load line gives\n\n\\[\nV_{out} = V_{DD} - I_D R_D\n        = V_{DD} - \\frac{1}{2}kR_D (V_{in}-V_{TH})^2 .\n\\]\n\nConditions for both devices to remain in saturation are\n\n\\[\n\\begin{aligned}\nV_X &\\ge V_{ov} = V_{in}-V_{TH},\\\\\nV_{out}-V_X &\\ge V_{ov}.\n\\end{aligned}\n\\]\n\nEquivalently, \\(V_{out} \\ge 2(V_{in}-V_{TH})\\).  \nWhen this is satisfied, the DC I–V characteristic of the **stack** is the same as that of a single transistor driven by \\(V_{in}\\).\n\n---\n\n## 2. Small‑signal gain\n\nLet small‑signal variables be lower‑case: \\(v_{in}\\), \\(v_x\\), \\(v_{out}\\).  \nUse transconductances \\(g_{m1}, g_{m2}\\) for \\(M_1, M_2\\), ignore \\(r_o\\) for clarity.\n\nCurrents (by small‑signal models):\n\n- Through \\(M_1\\): \\(i_{d1}=g_{m1}v_{in}\\) from node \\(X\\) to ground.\n- Through \\(M_2\\): \\(i_{d2}=g_{m2}(v_{in}-v_x)\\) from \\(V_{out}\\) to \\(V_X\\).\n- Through \\(R_D\\): \\(i_R = v_{out}/R_D\\) from \\(V_{out}\\) to ground.\n\n### Node \\(X\\)\n\nApplying KCL at node \\(X\\):\n\n\\[\ng_{m1}v_{in} = g_{m2}(v_{in}-v_x)\n\\]\n\n\\[\n\\Rightarrow v_x = \\frac{g_{m2}-g_{m1}}{g_{m2}}\\,v_{in}.\n\\tag{1}\n\\]\n\nIf the devices are equal \\((g_{m1}=g_{m2})\\), then \\(v_x=0\\): the intermediate node is at (approximate) AC ground.\n\n### Output node\n\nKCL at the output node:\n\n\\[\n\\frac{v_{out}}{R_D} + g_{m2}(v_{in}-v_x) = 0\n\\]\n\nUsing (1):\n\n\\[\nv_{out} = -g_{m2}R_D\\Bigl(v_{in} - \\frac{g_{m2}-g_{m1}}{g_{m2}}v_{in}\\Bigr)\n        = -g_{m1}R_D\\,v_{in}.\n\\]\n\nThus the low‑frequency gain is\n\n\\[\nA_v = \\frac{v_{out}}{v_{in}} = -g_{m1}R_D.\n\\]\n\nSo the **effective transconductance of the whole two‑transistor stack is just that of the bottom transistor \\(M_1\\)**; \\(M_2\\) does not affect the gain magnitude (ignoring channel‑length modulation).\n\nFor identical devices \\((g_{m1}=g_{m2}=g_m)\\),\n\n\\[\nA_v = -g_m R_D,\n\\]\n\nwhich is exactly the gain of an ordinary common‑source stage with a single transistor of transconductance \\(g_m\\) and load \\(R_D\\).\n\n---\n\n## 3. Qualitative interpretation\n\n- DC‑wise and low‑frequency‑wise, the circuit behaves like a **common‑source amplifier** whose amplifying device is \\(M_1\\) and whose gain is \\(-g_{m1}R_D\\).\n- The upper transistor \\(M_2\\) mainly:\n  - provides a series device so the total drain–source voltage is shared between \\(M_1\\) and \\(M_2\\) (useful for higher‑voltage operation),\n  - and, when the devices are sized similarly, keeps node \\(X\\) nearly at AC ground, so the drain of \\(M_1\\) does not see large signal swings.\n\nIn summary, the two stacked MOSFETs with common gate act, from a small‑signal viewpoint, like a single common‑source device (set by \\(M_1\\)’s \\(g_m\\)) feeding the resistor \\(R_D\\), with the intermediate node \\(X\\) approximately AC‑grounded when the devices are similar.",
        "format": "markdown",
        "sha256": "271843f810aff4b68d7221fbb8fa8cb233b502f17e18095ee83d4a0b1ad8ab9a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The central operating-region assumption is impossible for this common-gate-driven stack: when conducting, M1 is in triode and M2 is saturated. The answer instead derives a gain from both devices being saturated and misses the key result that the pair acts approximately like a longer-channel NMOS.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 12950,
        "total_tokens": 13594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11756,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 12950,
        "total_tokens": 13594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11756,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Two nMOS devices are stacked and their gates are tied together and driven by \\(v_{in}\\).  \n\\(M_1\\) has its source at ground, its drain at node \\(x\\); \\(M_2\\) has its source at node \\(x\\) and its drain at the output node, which is connected to \\(R_D\\) and \\(V_{DD}\\).\n\nAssume both transistors are biased in saturation.\n\n---\n\n### Small‑signal analysis\n\nLet the small‑signal parameters be \\(g_{m1}, g_{m2}\\) and (for now) neglect \\(r_o\\) to keep the algebra simple.\n\nThe small‑signal drain currents are\n\n\\[\ni_{d1}=g_{m1}v_{in}, \\qquad\ni_{d2}=g_{m2}(v_{in}-v_x)\n\\]\n\nThe two transistors are in series, so their small‑signal currents must be equal:\n\n\\[\ni_{d1}=i_{d2}\n\\quad\\Rightarrow\\quad\ng_{m1}v_{in}=g_{m2}(v_{in}-v_x)\n\\]\n\nThis gives the small‑signal voltage at the internal node:\n\n\\[\nv_x = \\frac{g_{m2}-g_{m1}}{g_{m2}}\\,v_{in}\n\\]\n\nAt the output node, KCL gives\n\n\\[\n\\frac{v_{out}}{R_D} + i_{d2}=0\n\\quad\\Rightarrow\\quad\n\\frac{v_{out}}{R_D} + g_{m2}(v_{in}-v_x)=0\n\\]\n\nUsing the relation above \\(g_{m2}(v_{in}-v_x)=g_{m1}v_{in}\\), so\n\n\\[\n\\frac{v_{out}}{R_D} + g_{m1}v_{in}=0\n\\]\n\nHence the voltage gain is\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n= -g_{m1} R_D\n\\]\n\nIf the two devices are identical (\\(g_{m1}=g_{m2}=g_m\\)),\n\n\\[\nA_v = -g_m R_D\n\\]\n\nwhich is exactly the gain of an ordinary common‑source stage with a single transistor of transconductance \\(g_m\\) and load \\(R_D\\).\n\nNote that for identical devices, the internal node has zero small‑signal swing:\n\n\\[\nv_x = 0 \\quad (\\text{for } g_{m1}=g_{m2})\n\\]\n\nso node \\(x\\) is effectively at AC ground.\n\n---\n\n### Effect of finite \\(r_o\\)\n\nIncluding finite output resistances \\(r_{o1}, r_{o2}\\) and assuming identical devices (\\(g_m, r_o\\)),\n\n\\[\nA_v = -\\frac{g_m}{\\dfrac{1}{R_D} + \\dfrac{1}{r_o(g_m r_o + 2)}}\n\\approx -g_m R_D\n\\]\n\nbecause typically \\(g_m r_o \\gg 1\\) and \\(r_o \\gg R_D\\), so the extra term is small.\n\n---\n\n### Main conclusions\n\n- The circuit behaves, for small signals, almost exactly like a **single common‑source amplifier** whose effective transconductance is that of the bottom device \\(M_1\\).  \n- \\(M_2\\) carries the same DC current and affects biasing and voltage headroom, but it does **not** increase the small‑signal gain when its gate is tied to the input.",
        "format": "markdown",
        "sha256": "c823cd22a37a0a6586554cf1f41574763a87076a6982e67c25cf2d3b24cd3bff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It assumes both NMOS devices are saturated, but the lower device is in triode while the upper is saturated. The resulting small-signal analysis is invalid and misses the central result: the stack behaves approximately like a single NMOS with a longer effective channel.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9410,
        "total_tokens": 10054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9410,
        "total_tokens": 10054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M1 and M2 are n‑MOS transistors in series, with their gates tied to the input \\(v_{in}\\).  \nThe drain of M2 is the output node, loaded by \\(R_D\\) to \\(V_{DD}\\).\n\n---\n\n### 1. Operating principle\n\n- M1 is the **input device**: its source is at ground, so\n  \\[\n  v_{GS1}=v_{in}.\n  \\]\n- M2 is above M1; its source is at the intermediate node \\(v_x\\), so\n  \\[\n  v_{GS2}=v_{in}-v_x.\n  \\]\n- The same DC current \\(I_D\\) flows through both devices and \\(R_D\\):\n  \\[\n  v_{out}=V_{DD}-I_D R_D.\n  \\]\n\nIn normal analog use both M1 and M2 are biased in saturation, and M2 mainly serves as a **cascode** that increases output resistance and reduces the Miller effect at the input.\n\n---\n\n### 2. Small‑signal model (midband)\n\nLet the DC bias be such that both transistors are in saturation.  \nUse the usual small‑signal parameters:\n\n- \\(g_{m1}, r_{o1}\\) for M1  \n- \\(g_{m2}, r_{o2}\\) for M2.\n\n#### 2.1 Equivalent output resistance of M1+M2\n\nSet \\(v_{in}=0\\) (AC ground at both gates) and apply a test voltage \\(v_t\\) at the drain of M2; measure the small‑signal current \\(i_t\\) into the network. With RD removed:\n\n\\[\nr_{o,\\text{eq}} = \\frac{v_t}{i_t}\n              = r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}.\n\\]\n\nThis is the same expression as for a conventional NMOS cascode: the output resistance is multiplied approximately by the intrinsic gain \\(g_{m2}r_{o2}\\).\n\n#### 2.2 Effective transconductance\n\nNow keep \\(R_D\\) but neglect body effect and assume \\(r_{o1}, r_{o2}\\to\\infty\\) to see the basic behavior.\n\nSolving the small‑signal equations for \\(v_{out}\\) as a function of \\(v_{in}\\) gives\n\n\\[\nA_v = \\frac{v_{out}}{v_{in}} \\approx -g_{m1} R_D.\n\\]\n\nThe upper device’s transconductance **cancels out** in the gain expression: the effective small‑signal transconductance from \\(v_{in}\\) to the drain current is essentially \\(g_{m1}\\).\n\nIncluding finite output resistances, the voltage gain is\n\n\\[\nA_v \\approx -g_{m1}\\left( R_D \\parallel r_{o,\\text{eq}}\\right),\n\\]\n\\[\nr_{o,\\text{eq}} = r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}.\n\\]\n\nIf \\(R_D \\ll r_{o,\\text{eq}}\\), then \\(A_v \\approx -g_{m1}R_D\\) (same as a single‑transistor common‑source stage).  \nIf \\(R_D \\gg r_{o,\\text{eq}}\\), then \\(A_v \\approx -g_{m1}r_{o,\\text{eq}}\\), and the large \\(r_{o,\\text{eq}}\\) provided by M2 gives a higher gain than a single transistor could.\n\n---\n\n### 3. Qualitative behavior\n\n- **From the input’s point of view** the stage behaves like an ordinary common‑source amplifier using M1, with transconductance \\(\\approx g_{m1}\\).\n- **From the output’s point of view** the stacked transistor M2 greatly increases the small‑signal resistance seen looking into the drain, so the gain can be higher (if \\(R_D\\) is not the limiting resistance).\n- The intermediate node \\(v_x\\) has a small AC variation (for identical devices, \\(g_{m1}=g_{m2}\\) gives \\(v_x \\approx 0\\) AC), so M1 sees nearly constant \\(v_{DS}\\), just as in a cascode configuration.\n\nIn summary, the circuit is a common‑source amplifier whose input device is M1 and whose output resistance is boosted by a cascode transistor M2; the small‑signal gain is\n\n\\[\n\\boxed{A_v \\approx -g_{m1}\\left(R_D \\parallel (r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2})\\right)}.\n\\]",
        "format": "markdown",
        "sha256": "e0bd5bd16df20985c0dd53c7cab9b36593e8a1a59f19b2c39fcebaa347527071"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer treats the tied-gate stack as a true cascode with both devices in saturation and claims a cascode-level output-resistance boost. In the shown circuit the lower device is in triode, and the pair acts approximately as one NMOS with a longer effective channel; the central operating principle and conclusion are therefore missed.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 13037,
        "total_tokens": 13681,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12014,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 13037,
        "total_tokens": 13681,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12014,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a source‑coupled pair used as a single‑ended amplifier.  \nM₁ and M₂ are nMOS transistors that share the tail current source \\(I_1\\).  \n\\(V_b\\) is a fixed bias, so M₂ is a common‑gate device; RD is the load\nresistor. We assume both MOSFETs are in saturation, body effect neglected,\nand \\(\\lambda \\approx 0\\) (i.e. \\(r_o\\to\\infty\\)).\n\n---\n\n### DC relations\n\nLet the DC drain currents be \\(I_{D1}\\) and \\(I_{D2}\\). Because of the tail\ncurrent source\n\n\\[\nI_{D1} + I_{D2} = I_1\n\\]\n\nand each drain current is set by its overdrive:\n\n\\[\nI_{D1} = \\tfrac12 k'_n\\frac{W_1}{L_1}(V_{in}-V_{S}-V_{TH})^2\n\\]\n\\[\nI_{D2} = \\tfrac12 k'_n\\frac{W_2}{L_2}(V_b-V_{S}-V_{TH})^2\n\\]\n\nwhere \\(V_S\\) is the common source voltage. Together with the above\nconstraint these equations fix the operating point and thus \\(g_{m1}, g_{m2}\\).\n\n---\n\n### Small‑signal model\n\nTake small‑signal quantities \\(v_{in}, v_s, v_o\\).\nAC ground: \\(V_{DD}\\), \\(V_b\\), and the tail source \\(I_1\\).\n\nFor each device:\n\n\\[\ni_{d1} = g_{m1}(v_{in}-v_s)\n\\]\n\\[\ni_{d2} = g_{m2}(0 - v_s) = -g_{m2}v_s\n\\]\n\nSince the tail current is ideal, its incremental current is zero, so the\nincrements of the two drain currents must sum to zero:\n\n\\[\n\\Delta i_{D1} + \\Delta i_{D2} = 0\n\\]\n\nwhich in small‑signal form is\n\n\\[\ng_{m1}(v_{in}-v_s) - g_{m2}v_s = 0\n\\]\n\nHence\n\n\\[\nv_s = \\frac{g_{m1}}{g_{m1}+g_{m2}}\\,v_{in}\n\\tag{1}\n\\]\n\nAt the output node:\n\ncurrent through \\(R_D\\) (to ground) is \\(v_o/R_D\\);\n\ncurrent through M₂ (leaving the node) is \\(i_{d2} = -g_{m2}v_s\\).\n\nKCL at \\(v_o\\):\n\n\\[\n\\frac{v_o}{R_D} + i_{d2} = 0\n\\Rightarrow\n\\frac{v_o}{R_D} - g_{m2}v_s = 0\n\\]\n\nUsing (1):\n\n\\[\nv_o = g_{m2}R_D\\,v_s\n     = g_{m2}R_D \\frac{g_{m1}}{g_{m1}+g_{m2}} v_{in}\n\\]\n\n---\n\n### Voltage gain, input and output resistance\n\n**Voltage gain**\n\n\\[\nA_v \\equiv \\frac{v_o}{v_{in}}\n  = \\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\,R_D\n\\]\n\nThis gain is **positive** (non‑inverting).  \nIf \\(g_{m1}=g_{m2}=g_m\\),\n\n\\[\nA_v = \\frac{g_m}{2} R_D\n\\]\n\n**Input resistance**\n\nThe input is at the gate of M₁ → \\(R_{in} \\approx \\infty\\) (MOS gate).\n\n**Output resistance**\n\nWith \\(v_{in}=0\\) (so \\(v_s=0\\)), M₂’s small‑signal current is zero, so the\nonly path from \\(v_o\\) to ground is through \\(R_D\\):\n\n\\[\nR_{out} \\approx R_D\n\\]\n\n(With finite \\(r_{o2}\\), \\(R_{out} \\approx R_D \\parallel r_{o2}\\).)\n\n---\n\n**Interpretation**\n\n- M₁ converts the input voltage to a change in tail‑current distribution.\n- Because \\(I_1\\) is fixed, any increase in M₁ current must reduce M₂\ncurrent.\n- The change in M₂ current through \\(R_D\\) produces a (non‑inverting) output\nvoltage.  \nThe effective transconductance from \\(v_{in}\\) to the output current is\n\n\\[\ng_{m,\\text{eq}} = \\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}},\n\\]\n\nso the circuit behaves like a single‑ended differential pair with gain\n\\(A_v = g_{m,\\text{eq}}R_D\\).",
        "format": "markdown",
        "sha256": "a6c1f9f0532eeb2422bad1e9dfe989c91c2a4657f1052842ddb9b54aa7e7a547"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair with M₂ as a common-gate device and gives the correct non-inverting gain. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 13166,
        "total_tokens": 13810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12080,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 13166,
        "total_tokens": 13810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12080,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a one‑sided differential pair:  \nM1 and M2 share the same source node, which is biased by the tail‑current source \\(I_1\\).  \nM1’s drain is tied to \\(V_{DD}\\); M2’s drain is connected to \\(V_{DD}\\) through \\(R_D\\), and its gate is held at a fixed bias \\(V_b\\).  \nThe input is \\(V_{in}\\) at the gate of M1 and the output is \\(V_{out}\\) at the drain of M2.\n\n---\n\n### 1. DC relations\n\nLet the common source node voltage be \\(V_S\\).\n\nCurrents (assuming both NMOS in saturation, body effect ignored):\n\n\\[\nI_{D1} \\approx \\frac{1}{2}k_1 (V_{in}-V_S-V_{th1})^2\n\\]\n\\[\nI_{D2} \\approx \\frac{1}{2}k_2 (V_b-V_S-V_{th2})^2\n\\]\n\nTail‑current split:\n\n\\[\nI_{D1}+I_{D2}=I_1\n\\]\n\nDrain resistor:\n\n\\[\nI_{D2} = \\frac{V_{DD}-V_{out}}{R_D}\n\\]\n\nThese three equations determine \\(V_S\\), \\(I_{D1}\\), \\(I_{D2}\\), and \\(V_{out}\\) for a given \\(V_{in}\\) (within the range keeping both transistors in saturation).\n\nQualitative behavior:\n\n- Increasing \\(V_{in}\\) → \\(I_{D1}\\) increases.  \n- Since \\(I_1\\) is fixed, \\(I_{D2}\\) must decrease.  \n- Smaller \\(I_{D2}\\) → smaller drop across \\(R_D\\) → \\(V_{out}\\) rises.\n\nSo the stage has **non‑inverting** DC transfer: \\(V_{out}\\) increases with \\(V_{in}\\).\n\n---\n\n### 2. Small‑signal gain (neglecting \\(r_o\\))\n\nLet small‑signal quantities be lowercase: \\(v_{in}\\), \\(v_s\\), \\(v_o\\).  \nAssume the bias \\(V_b\\) and \\(V_{DD}\\) are AC ground, and the current‑source \\(I_1\\) is ideal (infinite small‑signal resistance).\n\nTransconductances: \\(g_{m1}\\) for M1, \\(g_{m2}\\) for M2.\n\n#### Node at the common source\n\nThe current source is open in small signal, so the net current leaving node \\(s\\) must be zero.\n\nCurrents from source to drains:\n\n- Through M1: \\(i_{s1} = -g_{m1}(v_{in}-v_s)\\)\n- Through M2: \\(i_{s2} = g_{m2} v_s\\) (because \\(v_{gs2} = -v_s\\))\n\nKCL at node \\(s\\):\n\n\\[\ni_{s1}+i_{s2}=0\n\\]\n\\[\n-g_{m1}(v_{in}-v_s)+g_{m2}v_s = 0\n\\]\n\nSolve for \\(v_s\\):\n\n\\[\n(g_{m1}+g_{m2})v_s = g_{m1} v_{in}\n\\Rightarrow\nv_s = \\frac{g_{m1}}{g_{m1}+g_{m2}}\\, v_{in}\n\\]\n\n#### Output node\n\nAt node \\(o\\):\n\n- Current through \\(R_D\\): \\(v_o/R_D\\)\n- Current through M2 to node \\(s\\): \\(i_{d2} = g_{m2} v_{gs2} = -g_{m2} v_s\\)\n\nKCL:\n\n\\[\n\\frac{v_o}{R_D} - g_{m2} v_s = 0\n\\Rightarrow\nv_o = g_{m2} R_D \\, v_s\n\\]\n\nSubstitute \\(v_s\\):\n\n\\[\nv_o = g_{m2} R_D \\cdot \\frac{g_{m1}}{g_{m1}+g_{m2}}\\, v_{in}\n\\]\n\nSo the **small‑signal voltage gain** is\n\n\\[\nA_v \\equiv \\frac{v_o}{v_{in}}\n   = \\frac{g_{m1} g_{m2}}{g_{m1}+g_{m2}} \\, R_D\n\\]\n\nwith **positive** sign.\n\nDefine an effective transconductance\n\n\\[\ng_{m,\\text{eff}} = \\frac{g_{m1} g_{m2}}{g_{m1}+g_{m2}} = (g_{m1} \\parallel g_{m2})\n\\]\n\nThen\n\n\\[\nA_v \\approx g_{m,\\text{eff}} R_D\n\\]\n\nLimiting cases:\n\n- If \\(g_{m1} \\gg g_{m2}\\): \\(A_v \\approx g_{m2} R_D\\)\n- If \\(g_{m2} \\gg g_{m1}\\): \\(A_v \\approx g_{m1} R_D\\)\n\nIncluding \\(r_o\\) would slightly reduce the magnitude and change the effective \\(g_m\\), but the topology and sign remain the same.\n\n---\n\n### 3. Interpretation\n\n- Functionally, this is a **single‑ended differential pair**: the signal on M1 competes with a fixed‑bias “reference” transistor M2 for the tail current \\(I_1\\).  \n- It realizes a non‑inverting gain with effective transconductance \\(g_{m1} \\parallel g_{m2}\\) driving the load \\(R_D\\).  \n- As long as both M1 and M2 remain in saturation, the gain expression above holds.",
        "format": "markdown",
        "sha256": "76aae77d337de3bec61e11a63f20c90eff7fc5020c0b6819b8ca02b7530a5e1c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, with M2 biased at Vb and output taken at its drain; the derived gain is also non-inverting and matches the small-signal result.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 10190,
        "total_tokens": 10834,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8933,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 10190,
        "total_tokens": 10834,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8933,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a source‑coupled NMOS pair (a differential pair) with a single‑ended resistive load.\n\n- \\(M_1\\) and \\(M_2\\) are nMOS.\n- Their sources are tied together and biased by the tail current source \\(I_1\\).\n- The gate of \\(M_1\\) is the signal input \\(V_{in}\\).\n- The gate of \\(M_2\\) is held at a fixed bias \\(V_b\\).\n- The drain of \\(M_1\\) is tied directly to \\(V_{DD}\\) (AC ground).\n- The drain of \\(M_2\\) is loaded by \\(R_D\\) and is the output node \\(V_{out}\\).\n\nSo the constant current \\(I_1\\) is steered between \\(M_1\\) and \\(M_2\\) according to the difference \\(V_{in}-V_b\\).  \nIf \\(V_{in} > V_b\\), more current flows through \\(M_1\\) and less through \\(M_2\\), so the current in \\(R_D\\) decreases and \\(V_{out}\\) rises toward \\(V_{DD}\\).  \nIf \\(V_{in} < V_b\\), the opposite happens and \\(V_{out}\\) falls.\n\n---\n\n### Small‑signal gain \\(A_v = v_{out}/v_{in}\\)\n\nAssume:\n\n- Both transistors are in saturation,\n- Channel‑length modulation is neglected (\\(r_o \\to \\infty\\)),\n- Small‑signal transconductances are \\(g_{m1}\\) and \\(g_{m2}\\).\n\nAC small‑signal node at the sources: \\(v_s\\).  \nSince the tail current source is ideal, it is open‑circuit for AC.\n\nFor \\(M_1\\): \\(i_{d1} = g_{m1}(v_{in} - v_s)\\) (drain current downward).  \nFor \\(M_2\\): \\(i_{d2} = g_{m2}(0 - v_s) = -g_{m2} v_s\\).\n\nKCL at the common source node:\n\n\\[\ng_{m1}(v_{in}-v_s) - g_{m2}v_s = 0\n\\]\n\n\\[\nv_s = \\frac{g_{m1}}{g_{m1}+g_{m2}}\\,v_{in}\n\\]\n\nThus for \\(M_2\\):\n\n\\[\nv_{gs2} = -v_s = -\\frac{g_{m1}}{g_{m1}+g_{m2}}\\,v_{in}\n\\]\n\n\\[\ni_{d2} = g_{m2}v_{gs2} = -\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\,v_{in}\n\\]\n\nKCL at \\(v_{out}\\) (with \\(V_{DD}\\) as AC ground):\n\n\\[\n\\frac{v_{out}}{R_D} + i_{d2} = 0\n\\]\n\n\\[\n\\frac{v_{out}}{R_D} - \\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\,v_{in} = 0\n\\]\n\n\\[\n\\boxed{A_v = \\frac{v_{out}}{v_{in}}\n      = R_D\\,\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}} }\n\\]\n\nIf \\(M_1\\) and \\(M_2\\) are identical and biased so that \\(g_{m1}=g_{m2}=g_m\\),\n\n\\[\n\\boxed{A_v = \\frac{g_m R_D}{2}}\n\\]\n\nThe gain is positive (non‑inverting): an increase in \\(V_{in}\\) raises \\(V_{out}\\).\n\n---\n\n### Operating‑region constraints (both in saturation)\n\n- \\(M_1\\): \\(V_{DS1} = V_{DD}-V_S \\ge V_{GS1}-V_{th}\\)  \n  → Typically easily satisfied, so \\(M_1\\) is always in saturation.\n- \\(M_2\\): \\(V_{DS2} = V_{out}-V_S \\ge V_{GS2}-V_{th}=V_b - V_S - V_{th}\\)  \n  → \\(V_{out} \\ge V_b - V_{th}\\) is required for saturation.\n\nThe output can swing approximately between:\n\n- High level: near \\(V_{DD}\\) when \\(V_{in}\\) is much larger than \\(V_b\\) (all tail current steered to \\(M_1\\), so almost no current through \\(R_D\\)).\n- Low level: about \\(V_{DD} - I_1 R_D\\) (when \\(V_{in}\\) is much smaller than \\(V_b\\), all current flows in \\(M_2\\)).",
        "format": "markdown",
        "sha256": "9971bb90da0b63dff4d2d010e88e881d2ebd7ddf06abcb15b4600d6a88a27635"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, its bias and output connections, and derives the positive small-signal gain. The essential circuit interpretation and signal behavior match the golden solution.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 5746,
        "total_tokens": 6390,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4670,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 5746,
        "total_tokens": 6390,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4670,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Set up the small‑signal model and look into node \\(V_{out}\\).\n\nFor the output impedance we set the input signal to zero, so the gate of \\(M_1\\) is connected to ground through \\(R_S\\).  \nThe important small‑signal elements of \\(M_1\\) are its transconductance \\(g_{m1}\\) and its gate‑to‑source capacitance \\(C_{gs1}\\).  \n\\(M_2\\) is just a bias current source, so its small‑signal resistance is assumed large.\n\nLet a test voltage \\(v_x\\) be applied at \\(V_{out}\\).  \nBecause of \\(C_{gs1}\\), the gate voltage \\(v_g\\) does not follow \\(v_x\\) instantly but is given by\n\n\\[\nv_g = \\frac{j\\omega C_{gs1} R_S}{1+j\\omega C_{gs1} R_S}\\,v_x\n\\]\n\nso that\n\n\\[\nv_x - v_g = \\frac{1}{1+j\\omega C_{gs1} R_S}\\,v_x\n\\]\n\nThe small‑signal current drawn from \\(V_{out}\\) is the sum of the current through \\(C_{gs1}\\) and the current through the transconductance source of \\(M_1\\):\n\n\\[\ni_x = (j\\omega C_{gs1} + g_{m1})(v_x - v_g)\n\\]\n\nHence the impedance seen at \\(V_{out}\\) is\n\n\\[\nZ_{out}(\\omega)=\\frac{v_x}{i_x}\n   =\\frac{1+j\\omega R_S C_{gs1}}{g_{m1}+j\\omega C_{gs1}}\n\\]\n\nFor frequencies \\(\\omega \\ll g_{m1}/C_{gs1}\\),\n\n\\[\nZ_{out}(\\omega) \\approx \\frac{1}{g_{m1}} \n      + j\\omega\\,\\frac{C_{gs1}(g_{m1}R_S-1)}{g_{m1}^2}\n\\]\n\nIf \\(g_{m1}R_S>1\\), the imaginary part is positive; that is,\n\n\\[\nZ_{out}(\\omega) \\approx R_{series} + j\\omega L\n\\]\n\nwith\n\n\\[\nL \\approx \\frac{C_{gs1}(g_{m1}R_S-1)}{g_{m1}^2}\n       \\simeq \\frac{R_S C_{gs1}}{g_{m1}}\n\\]\n\nThis is the impedance of an inductor in series with a resistor.  \n\nThus, the combination of the gate resistor \\(R_S\\), the gate‑source capacitance \\(C_{gs1}\\), and the transconductance \\(g_{m1}\\) makes the source (node \\(V_{out}\\)) of \\(M_1\\) look inductive—an example of an “active inductor” or gyrator.",
        "format": "markdown",
        "sha256": "f491d5cdb9ec8628fe33e5a3eb1b6160ef9e74ae2ac6bbc0a3c5d06e19d2c032"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the output impedance and explains that it rises from about 1/gm1 to RS as Cgs1 shorts the gate to the source. It identifies the inductive condition RS > 1/gm1 and gives the corresponding series-inductance approximation.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 933,
        "output_tokens": 6651,
        "total_tokens": 7584,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6010,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 933,
        "output_tokens": 6651,
        "total_tokens": 7584,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6010,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "With all signal sources set to ac ground, the gate of \\(M_{1}\\) is connected to ground through \\(R_S\\).  \nThe only frequency–dependent element left in the circuit is the gate‑source capacitance\n\\(C_{gs1}\\) of \\(M_{1}\\).  \nSeen from the output node, this capacitance is *not* in a simple shunt position: it is\nreached through the high‑gain device \\(M_{1}\\) whose drain (at \\(V_{DD}\\)) is at ac\nground.\n\nIf a small ac current is injected into \\(V_{\\text{out}}\\),\n\n1. The resulting voltage \\(v_{out}\\) appears across \\(C_{gs1}\\), producing a\ndisplacement current through \\(C_{gs1}\\) into the gate node.\n2. That current must flow through \\(R_S\\), therefore the gate voltage \\(v_g\\) is the\nintegral of this current (i.e. \\(v_g\\) lags \\(v_{out}\\) by almost \\(90^\\circ\\) over a\ncertain frequency range).\n3. The transistor converts the gate–source voltage \\(v_{gs1}=v_g-v_{out}\\) into a\ndrain/source current \\(i_{m1}=g_{m1}v_{gs1}\\).  \nBecause \\(v_{gs1}\\) itself is proportional to the time integral of the current that flowed\nearlier, the current drawn by the circuit at \\(V_{\\text{out}}\\) is approximately\nproportional to the **time integral of \\(v_{out}\\)**.\n\nThat is,\n\\[\ni_{out} \\approx \\frac{1}{L_{\\text{eq}}} \\int v_{out}\\,dt\n\\quad\\Rightarrow\\quad\nZ_{out}(s)=\\frac{v_{out}}{i_{out}} \\approx sL_{\\text{eq}},\n\\]\nwhich is the impedance of an inductor.  \n\nCarrying out a small‑signal analysis (using \\(g_{m1}\\) and \\(C_{gs1}\\)) shows that, for an\nappropriate choice of \\(R_S\\) and over a certain frequency range,\n\\[\nZ_{out}(j\\omega) \\approx j\\omega L_{\\text{eq}},\n\\qquad\nL_{\\text{eq}} \\approx \\frac{R_S C_{gs1}}{g_{m1}} .\n\\]\n\nThus, the combination of the MOSFET transconductance and its gate‑source capacitance,\ntogether with \\(R_S\\), behaves as a gyrator that reflects the capacitor as an\n*inductive* impedance at the output node.",
        "format": "markdown",
        "sha256": "81f562425955314e19049342e651acecf6985a97c4946bdfdddd126bef5b66f9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the relevant Cgs–RS–gm combination and gives a valid approximate inductance in a suitable band, but its gate-phase explanation is incorrect and it omits the key transition from 1/gm at low frequency to RS at high frequency and the condition RS > 1/gm for the impedance to rise.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 933,
        "output_tokens": 16089,
        "total_tokens": 17022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15519,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 933,
        "output_tokens": 16089,
        "total_tokens": 17022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15519,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Set all independent sources to ac–zero to find the small–signal output impedance:\n\n- \\(V_{DD}\\), \\(V_{in}\\), and \\(V_b\\) → ac ground.\n- The output node is the source of \\(M_1\\); the drain of \\(M_1\\) is at ac ground.\n- The gate of \\(M_1\\) is connected to ground through \\(R_S\\).\n- The important small‑signal elements of \\(M_1\\) are its transconductance \\(g_m\\) and gate–source capacitance \\(C_{gs}\\) (and a large \\(r_o\\), which we neglect here).\n- \\(M_2\\) just contributes a (large) resistance to ground and does not create the inductive behavior, so it can be ignored for explaining the effect.\n\n### Small‑signal analysis\n\nLet a test current \\(I_{test}\\) be injected into the output node and produce a voltage \\(v_s\\) there.\n\nNode G (gate of \\(M_1\\)):\n\n\\[\n\\frac{v_g}{R_S} + s C_{gs} (v_g - v_s) = 0\n\\]\n\\[\nv_g = \\frac{s C_{gs} R_S}{1 + s C_{gs} R_S} \\, v_s\n\\]\n\nNode S (output):\n\nCurrent leaving node S is the sum through \\(C_{gs}\\) and the dependent source \\(g_m v_{gs}\\):\n\n\\[\nI_{test} = (s C_{gs} + g_m)(v_s - v_g)\n\\]\n\nUsing the expression for \\(v_g\\),\n\n\\[\nv_s - v_g = \\frac{v_s}{1 + s C_{gs} R_S}\n\\]\n\nHence\n\n\\[\nI_{test} = (s C_{gs} + g_m) \\frac{v_s}{1 + s C_{gs} R_S}\n\\]\n\nand\n\n\\[\nZ_{out}(s) = \\frac{v_s}{I_{test}}\n          = \\frac{1 + s C_{gs} R_S}{g_m + s C_{gs}}\n          = \\frac{1}{g_m}\\,\\frac{1 + s R_S C_{gs}}{1 + s C_{gs}/g_m}\n\\]\n\n### Condition for inductive behavior\n\nFor frequencies such that\n\n\\[\n\\frac{1}{R_S C_{gs}} \\ll \\omega \\ll \\frac{g_m}{C_{gs}},\n\\]\n\nwe have \\(s R_S C_{gs} \\gg 1\\) and \\(s C_{gs}/g_m \\ll 1\\). Then\n\n\\[\nZ_{out}(s) \\approx \\frac{1}{g_m} \\, s R_S C_{gs}\n             = s \\underbrace{\\Big(\\frac{R_S C_{gs}}{g_m}\\Big)}_{L_{eq}}\n\\]\n\nWith \\(s = j\\omega\\),\n\n\\[\nZ_{out} \\approx j\\omega L_{eq},\n\\quad L_{eq} = \\frac{R_S C_{gs}}{g_m}.\n\\]\n\nThis has the form of an inductor of value \\(L_{eq}\\): the impedance is purely imaginary and increases linearly with frequency.\n\n### Intuitive view\n\nA change in output voltage appears at the source of \\(M_1\\). Through \\(C_{gs}\\) this change is coupled to the gate, but the gate cannot follow instantaneously because it is tied to ground through \\(R_S\\). The lagging gate voltage causes the transistor’s current (via \\(g_m\\)) to lag the output voltage by ~90°. Thus the current through the device is proportional to \\(d v_{out}/dt\\), making the output impedance behave like that of an inductor. This is the principle of a CMOS “active inductor” implemented with a MOSFET, a resistor, and its gate–source capacitance.",
        "format": "markdown",
        "sha256": "ac5c0f07f76b37ae5e009b658726a8e92be635da50c07743b948241a93daf8df"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies the source-follower topology and derives the simplified output-impedance expression. The stated zero-to-pole frequency range yields a rising, inductive impedance when the resistor is sufficiently large relative to 1/gm; the quoted equivalent inductance is a valid approximation in that well-separated range.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 933,
        "output_tokens": 5924,
        "total_tokens": 6857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5083,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 933,
        "output_tokens": 5924,
        "total_tokens": 6857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5083,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume both devices are n‑MOSFETs operating in saturation and neglect channel‑length modulation ( \\(r_o\\to\\infty\\) ).  \nConnections:\n\n- \\(M_1\\): source at ground, gate at node \\(X\\), drain at \\(V_{\\text{out}}\\).\n- \\(M_2\\): source at ground, **gate at \\(V_{\\text{out}}\\)**, drain at node \\(X\\).\n- A current source \\(I_{\\text{in}}\\) injects current into node \\(X\\).\n- \\(R_{D1}\\) connects \\(V_{\\text{out}}\\) to \\(V_{DD}\\) (AC ground).\n\nSo \\(M_1\\) is a common–source amplifier and \\(M_2\\) feeds back a current from the output node into node \\(X\\).\n\n---\n\n### Small‑signal analysis\n\nLet the small‑signal variables be \\(v_x\\) and \\(v_o\\) for nodes \\(X\\) and \\(V_{\\text{out}}\\).\n\nFor \\(M_1\\):\n\\[\ni_{d1}=g_{m1} v_x \\quad ( \\text{from } V_{\\text{out}} \\text{ to ground})\n\\]\n\nFor \\(M_2\\):\n\\[\ni_{d2}=g_{m2} v_o \\quad (\\text{from } X \\text{ to ground})\n\\]\n\n#### KCL at node \\(X\\)\n\nCurrents leaving node \\(X\\):\n\n\\[\ng_{m2} v_o - i_{\\text{in}} = 0\n\\]\n\nso\n\n\\[\nv_o = \\frac{i_{\\text{in}}}{g_{m2}}\n\\tag{1}\n\\]\n\nThus the output voltage is proportional to the input current; the proportionality is set only by \\(g_{m2}\\).\n\n#### KCL at node \\(V_{\\text{out}}\\)\n\nCurrents leaving node \\(V_{\\text{out}}\\):\n\n\\[\n\\frac{v_o}{R_{D1}} + g_{m1} v_x = 0\n\\]\n\nUsing (1),\n\n\\[\n\\frac{i_{\\text{in}}}{g_{m2} R_{D1}} + g_{m1} v_x = 0\n\\Rightarrow\nv_x = -\\frac{i_{\\text{in}}}{g_{m1} g_{m2} R_{D1}}\n\\tag{2}\n\\]\n\nSo the input node voltage is very small (for large \\(g_{m1} g_{m2} R_{D1}\\) ), i.e. node \\(X\\) behaves approximately as a virtual ground.\n\n---\n\n### Key results\n\n1. **Transimpedance (current‑to‑voltage gain)**  \n   From (1),\n   \\[\n   \\boxed{\\displaystyle \\frac{v_{\\text{out}}}{i_{\\text{in}}} \\approx \\frac{1}{g_{m2}} }\n   \\]\n   (sign depends on exact current directions; the magnitude is \\(1/g_{m2}\\)).  \n   It is essentially independent of \\(g_{m1}\\) and \\(R_{D1}\\) if both transistors have high gain.\n\n2. **Input resistance at node \\(X\\)**  \n   From (2),\n   \\[\n   r_{\\text{in}} = \\left|\\frac{v_x}{i_{\\text{in}}}\\right|\n   \\approx \\frac{1}{g_{m1} g_{m2} R_{D1}}\n   \\]\n   which can be made very small; hence the circuit behaves like a low‑impedance current‑summing node (good for a transimpedance amplifier).\n\n---\n\nInterpretation:  \n\\(M_1\\) with \\(R_{D1}\\) provides high voltage gain. \\(M_2\\) senses the output voltage and returns a current \\(g_{m2} v_{\\text{out}}\\) to the input node, forming (shunt‑shunt) feedback. The closed‑loop transresistance seen by the current source is approximately \\(1/g_{m2}\\), i.e., the MOSFET \\(M_2\\) realizes an effective resistor \\(R_{\\text{eq}} \\approx 1/g_{m2}\\).",
        "format": "markdown",
        "sha256": "c24158824399ddaec7a530a932e62fe3f91539b12733a9ad0f6f70f7c8a58787"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies that M2's gate is tied to Vout and recognizes the feedback path, but misses that it is positive feedback. It treats the unstable loop as a usable transimpedance amplifier and discards the negative sign of the input resistance.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 21968,
        "total_tokens": 22612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 21968,
        "total_tokens": 22612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume both MOSFETs are n‑channel devices biased in saturation, their bulk tied to the source, and neglect \\(r_o\\) for clarity.  \nLet \\(g_{m1}, g_{m2}\\) be the small‑signal transconductances of \\(M_1\\) and \\(M_2\\).\n\nConnections (from the figure):\n\n- \\(M_1\\): source at ground, gate at node \\(X\\), drain at \\(v_\\text{out}\\) (with load \\(R_{D1}\\) to \\(V_{DD}\\)).\n- \\(M_2\\): one terminal at node \\(X\\), the other at ground, gate at \\(v_\\text{out}\\).\n\nSo \\(I_\\text{in}\\) is injected into node \\(X\\); \\(M_2\\) returns a current from \\(X\\) to ground proportional to \\(v_\\text{out}\\).\n\n---\n\n### Small‑signal analysis\n\nLet small‑signal voltages be \\(v_x\\) at node \\(X\\) and \\(v_o\\) at \\(v_\\text{out}\\).\n\n**Current in the MOSFETs**\n\n- \\(M_1\\):  \n  \\(i_{d1} = g_{m1} v_x\\) (from drain node \\(v_o\\) to ground).\n\n- \\(M_2\\):  \n  gate at \\(v_o\\), source at ground → small‑signal drain current (from node \\(X\\) to ground)  \n  \\(i_{d2} = g_{m2} v_o\\).\n\n---\n\n#### Node \\(X\\)\n\nOnly \\(I_\\text{in}\\) and \\(M_2\\) currents flow (gate of \\(M_1\\) draws negligible current):\n\n\\[\nI_\\text{in} = i_{d2} = g_{m2} v_o\n\\]\n\n\\[\n\\boxed{v_o = \\dfrac{I_\\text{in}}{g_{m2}}}\n\\]\n\n---\n\n#### Node \\(v_\\text{out}\\)\n\nCurrents leaving \\(v_o\\):\n\n- Through \\(R_{D1}\\): \\(v_o / R_{D1}\\)\n- Through \\(M_1\\): \\(g_{m1} v_x\\)\n\nKCL:  \n\n\\[\n\\frac{v_o}{R_{D1}} + g_{m1} v_x = 0\n\\]\n\nso\n\n\\[\nv_o = - g_{m1} R_{D1} v_x\n\\]\n\nSubstitute \\(v_o = I_\\text{in}/g_{m2}\\):\n\n\\[\n\\frac{I_\\text{in}}{g_{m2}} = - g_{m1} R_{D1} v_x\n\\]\n\n\\[\n\\boxed{v_x = -\\,\\frac{I_\\text{in}}{g_{m1} g_{m2} R_{D1}}}\n\\]\n\n---\n\n### Key results\n\n1. **Transimpedance (output voltage per input current)**  \n\n   \\[\n   Z_t \\equiv \\frac{v_o}{I_\\text{in}} = \\boxed{\\frac{1}{g_{m2}}}\n   \\]\n\n   (independent of \\(R_{D1}\\) and \\(g_{m1}\\), under the \\(r_o \\to \\infty\\) approximation).\n\n2. **Input resistance at node \\(X\\)**  \n\n   \\[\n   R_\\text{in} = \\frac{v_x}{I_\\text{in}}\n              = \\boxed{-\\,\\frac{1}{g_{m1} g_{m2} R_{D1}}}\n   \\]\n\n   The magnitude can be made very small; the negative sign just means that a positive\n   current into node \\(X\\) makes \\(v_x\\) go negative (active, feedback‑generated\n   “negative resistance”).\n\n3. **Qualitative behavior**\n\n- \\(M_1\\) with \\(R_{D1}\\) forms a voltage amplifier from \\(v_x\\) to \\(v_o\\).\n- \\(M_2\\) senses \\(v_o\\) and feeds back a current \\(g_{m2} v_o\\) into node \\(X\\),\n  opposing the effect of \\(I_\\text{in}\\).\n- This **shunt–series negative feedback** makes the input node a low‑impedance\n  “virtual ground,” while setting the transimpedance approximately to \\(1/g_{m2}\\).",
        "format": "markdown",
        "sha256": "0ab8c24cde8cdce3f2ed7be4b22dda80e9dc6662d57bd3d64f7a2f06221f2c5e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies M2’s gate connection and derives a negative input resistance, but calls the loop negative feedback and concludes the node is a stable virtual ground. The essential positive-feedback instability and latching behavior are missed.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 12944,
        "total_tokens": 13588,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11987,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 12944,
        "total_tokens": 13588,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11987,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Take M1 and M2 as n‑MOSFETs biased in saturation, ignore body effect and \\(r_o\\) (unless noted).  \nThe current source \\(I_{in}\\) is used to probe the small‑signal input resistance at node \\(X\\).\n\n---\n\n### Small–signal model\n\n- At node \\(X\\) we inject a small current \\(i_{in}\\).\n- M2: \\(i_{d2}=g_{m2}v_{out}\\) flows from \\(X\\) to ground.\n- M1: \\(i_{d1}=g_{m1}v_X\\) flows from \\(v_{out}\\) to ground.\n- \\(R_{D1}\\) is connected from \\(v_{out}\\) to AC ground (since \\(V_{DD}\\) is AC ground).\n\n---\n\n### Node equations\n\n**Node \\(X\\):**\n\nAll the current from the source must leave through M2:\n\n\\[\ni_{in} = g_{m2}v_{out} \\tag{1}\n\\]\n\n**Node \\(V_{out}\\):**\n\nThere is no independent source at this node, therefore\n\n\\[\n\\frac{v_{out}}{R_{D1}} + g_{m1} v_X = 0\n\\]\n\n\\[\n\\Rightarrow v_{out} = -g_{m1}R_{D1}v_X  \\tag{2}\n\\]\n\n(typical gain of a common‑source stage with load \\(R_{D1}\\)).\n\n---\n\n### Input resistance seen at node \\(X\\)\n\nFrom (1):\n\n\\[\nv_{out} = \\frac{i_{in}}{g_{m2}}\n\\]\n\nInsert into (2) and solve for \\(v_X\\):\n\n\\[\n\\frac{i_{in}}{g_{m2}} = -g_{m1}R_{D1}v_X\n\\]\n\n\\[\nv_X = -\\frac{i_{in}}{g_{m1}g_{m2}R_{D1}}\n\\]\n\nHence the small‑signal input resistance is\n\n\\[\nR_{in} \\equiv \\frac{v_X}{i_{in}}\n   = -\\frac{1}{g_{m1}g_{m2}R_{D1}}\n\\]\n\nSo the circuit presents a **negative resistance** at node \\(X\\).  \nA positive incremental current into \\(X\\) makes \\(v_X\\) decrease.\n\n---\n\n### Output voltage vs. input current\n\nFrom (1):\n\n\\[\n\\boxed{\\; v_{out} = \\dfrac{i_{in}}{g_{m2}} \\;}\n\\]\n\n(independent of \\(g_{m1}\\) and \\(R_{D1}\\) for the ideal case).\n\n---\n\n### With finite output resistances (optional)\n\nIncluding \\(r_{o1}\\) and \\(r_{o2}\\),\n\n\\[\nR_{in}=\\frac{1}{\n-\\dfrac{g_{m1}g_{m2}R_{D1}r_{o1}}{R_{D1}+r_{o1}}+\\dfrac{1}{r_{o2}}\n}\n\\approx -\\frac{R_{D1}\\parallel r_{o1}}{g_{m1}g_{m2}r_{o1}}\n\\]\n\nwhich reduces to \\(-1/(g_{m1}g_{m2}R_{D1})\\) when \\(r_{o1},r_{o2}\\to\\infty\\).\n\n---\n\nThus this network is a two‑transistor positive‑feedback cell that realizes a controllable negative resistance at node \\(X\\).",
        "format": "markdown",
        "sha256": "49dc52988082d9df9a4ac35f3f9efe9242300c624e065ef52fb0f29c289913ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies M2 as controlled by Vout, recognizes the positive-feedback loop, and states the negative input resistance consequence, satisfying the golden full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 15173,
        "total_tokens": 15817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14400,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 15173,
        "total_tokens": 15817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14400,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Below is a compact small‑signal analysis of the circuit (assume NMOS devices in saturation and ignore \\(r_o\\) for first order).\n\n---\n\n### 1. What the circuit is\n\nThe network is a **resistive‑feedback transimpedance amplifier (TIA)**:\n\n- \\(I_{in}\\) is the input current.\n- \\(V_{out}\\) is the output voltage.\n- \\(R_F\\) provides shunt–shunt (current–voltage) negative feedback.\n- \\(M_1\\) + \\(R_{D1}\\) convert current into a voltage at node \\(X\\).\n- \\(M_2\\) + \\(R_{D2}\\) form a voltage‑gain stage whose output is fed back through \\(R_F\\).\n\nThe aim is for\n\\[\nV_{out} \\approx -I_{in}R_F\n\\]\nalmost independent of transistor parameters.\n\n---\n\n### 2. Open‑loop behavior (disconnect \\(R_F\\))\n\nWith \\(R_F\\to\\infty\\), only \\(M_1,R_{D1},M_2,R_{D2}\\) remain.\n\n**Node at source of \\(M_1\\)**  \nGate of \\(M_1\\) is at AC ground. For small‑signal current \\(i_{in}\\),\n\n\\[\ni_{in} = g_{m1} v_s \\quad\\Rightarrow\\quad v_s = \\frac{i_{in}}{g_{m1}} .\n\\]\n\nThe incremental drain current of \\(M_1\\) is\n\\[\ni_{d1}=g_{m1}v_{gs1}=g_{m1}(0-v_s)=-i_{in}.\n\\]\nSo a current of magnitude \\(i_{in}\\) flows through \\(R_{D1}\\).\n\n**Node \\(X\\)**\n\\[\nv_X = i_{in}R_{D1}.\n\\]\n\n**Stage \\(M_2,R_{D2}\\)**  \nGate of \\(M_2\\) sees \\(v_X\\), so\n\\[\ni_{d2}=g_{m2}v_X=g_{m2}R_{D1} i_{in}.\n\\]\nKCL at the output node gives\n\\[\n\\frac{v_{out}}{R_{D2}} + i_{d2}=0\n\\quad\\Rightarrow\\quad\nv_{out} = -g_{m2}R_{D1}R_{D2}\\,i_{in}.\n\\]\n\nSo the **open‑loop transimpedance** (from \\(I_{in}\\) to \\(V_{out}\\) with no \\(R_F\\)) is\n\n\\[\nZ_{OL} \\equiv \\frac{v_{out}}{i_{in}}\n= -g_{m2}R_{D1}R_{D2}.\n\\]\n\n---\n\n### 3. Closed‑loop behavior with \\(R_F\\)\n\nNow connect \\(R_F\\) from \\(V_{out}\\) back to the input node.\n\nThe amplifier plus load can be modeled (open loop) as a transimpedance block\n\n\\[\nv_{out} = Z_{OL}\\,i_e,\n\\]\nwhere \\(i_e\\) is the current entering the amplifier input (the source of \\(M_1\\)).\n\nAt the summing node (source of \\(M_1\\)):\n\n- Input current: \\(i_{in}\\) (enters the node).\n- Feedback current through \\(R_F\\): \\(i_{RF} = \\dfrac{v_s - v_{out}}{R_F}\\).\n- Current into amplifier: \\(i_e = g_{m1} v_s\\).\n\nKCL: \\(i_{in} + i_{RF} = i_e\\).\n\nFor large loop gain the node voltage \\(v_s\\) is very small (a “virtual ground”), so\n\\(v_s \\approx 0\\) and \\(i_{RF} \\approx -v_{out}/R_F\\). Then\n\n\\[\ni_e \\approx i_{in} - \\frac{v_{out}}{R_F}.\n\\]\n\nUsing \\(v_{out} = Z_{OL} i_e\\):\n\n\\[\nv_{out} = Z_{OL}\\left(i_{in} - \\frac{v_{out}}{R_F}\\right)\n\\quad\\Rightarrow\\quad\nv_{out}\\left(1 + \\frac{Z_{OL}}{R_F}\\right) = Z_{OL} i_{in}.\n\\]\n\nThus the **closed‑loop transimpedance** is\n\n\\[\nZ_T \\equiv \\frac{v_{out}}{i_{in}}\n= \\frac{Z_{OL}}{1 + Z_{OL}/R_F}\n= \\frac{-g_{m2}R_{D1}R_{D2}}{1 - \\dfrac{g_{m2}R_{D1}R_{D2}}{R_F}} .\n\\]\n\nIf the magnitude of the open‑loop transimpedance is much larger than \\(R_F\\),\n\n\\[\n|Z_{OL}| \\gg R_F \\quad\\Rightarrow\\quad\nZ_T \\approx -R_F.\n\\]\n\nSo the output voltage is approximately\n\n\\[\n\\boxed{v_{out} \\approx -I_{in} R_F}\n\\]\n\nand depends mainly on the resistor \\(R_F\\), not on \\(g_{m1},g_{m2},R_{D1},R_{D2}\\).\n\n---\n\n### 4. Input and output resistance with feedback\n\n- **Open‑loop input resistance** (with \\(R_F\\) open):  \n  \\(R_{in,OL} = v_s/i_{in} = 1/g_{m1}\\).\n\n- With feedback and large loop gain, the effective input resistance is reduced:\n  \\[\n  R_{in,CL} \\approx \\frac{R_F}{|Z_{OL}|} \n  = \\frac{R_F}{g_{m2}R_{D1}R_{D2}} \\ll \\frac{1}{g_{m1}}.\n  \\]\n  Thus the input node is held near ground potential.\n\n- **Output resistance** (seen at \\(V_{out}\\)) is increased by shunt–shunt feedback roughly by a factor \\((1+|Z_{OL}|/R_F)\\) over the open‑loop value (\\(R_{D2}\\) || \\(r_{o2}\\)).\n\n---\n\nIn summary, the circuit is a MOS transimpedance amplifier where \\(M_1,R_{D1},M_2,R_{D2}\\) provide a large open‑loop transimpedance \\(Z_{OL}=-g_{m2}R_{D1}R_{D2}\\), and the feedback resistor \\(R_F\\) fixes the closed‑loop transimpedance close to \\(-R_F\\) while greatly lowering the input resistance.",
        "format": "markdown",
        "sha256": "07be916683566f68032400b11f59bff1921f69de317e09332d1cfe8363763f8a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies M1 as the common-gate input device, M2 as the stage driven by X, and RF as feedback from Vout to the input, correctly describing a negative-feedback TIA. Its detailed closed-loop algebra has a sign inconsistency, but the golden solution’s full-credit rule is met.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 15437,
        "total_tokens": 16081,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13965,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 15437,
        "total_tokens": 16081,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13965,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a MOS transimpedance amplifier (current‑to‑voltage converter) using shunt–shunt negative feedback.\n\n---\n\n### 1. Small–signal model\n\nFor small signals set \\(V_{DD}\\) and \\(V_b\\) to AC ground and model the MOSFETs with transconductances \\(g_{m1}, g_{m2}\\) and neglect \\(r_o\\).\n\nNodes:\n\n- \\(v_s\\): input summing node (source of \\(M_1\\), left side of \\(R_F\\)).\n- \\(v_x\\): drain of \\(M_1\\), gate of \\(M_2\\).\n- \\(v_o\\): output node.\n\n---\n\n### 2. Gain of the main amplifier (without worrying about feedback yet)\n\n**Stage 1 – \\(M_1, R_{D1}\\)** (common‑gate):\n\nGate of \\(M_1\\) at AC ground ⇒ \\(v_{gs1} = -v_s\\).\n\nAt node \\(x\\):\n\n\\[\n\\frac{v_x}{R_{D1}} + g_{m1}(-v_s) = 0\n\\]\n\\[\n\\Rightarrow v_x = g_{m1}R_{D1}v_s\n\\]\n\nSo stage‑1 gain:  \n\\[\nA_1 = \\frac{v_x}{v_s}= g_{m1}R_{D1}\n\\]\n\n**Stage 2 – \\(M_2, R_{D2}\\)** (common‑source):\n\nGate at \\(v_x\\), source at ground. At node \\(v_o\\):\n\n\\[\n\\frac{v_o}{R_{D2}} + g_{m2}v_x = 0\n\\]\n\\[\n\\Rightarrow v_o = -g_{m2}R_{D2}v_x\n\\]\n\nSo stage‑2 gain:\n\n\\[\nA_2 = \\frac{v_o}{v_x} = -g_{m2}R_{D2}\n\\]\n\n**Overall open‑loop voltage gain (from \\(v_s\\) to \\(v_o\\)):**\n\n\\[\nA_v = A_2 A_1\n    = -g_{m1}g_{m2}R_{D1}R_{D2}\n\\tag{1}\n\\]\n\n---\n\n### 3. Closed‑loop relation \\(v_o / I_{in}\\) (transimpedance)\n\nKCL at the summing node \\(v_s\\):\n\nCurrents leaving \\(v_s\\):\n\n- Through \\(M_1\\): \\(g_{m1}v_s\\)\n- Through \\(R_F\\): \\(\\dfrac{v_s - v_o}{R_F}\\)\n\nCurrent entering from the source: \\(I_{in}\\).\n\n\\[\ng_{m1}v_s + \\frac{v_s - v_o}{R_F} = I_{in}\n\\tag{2}\n\\]\n\nUsing \\(v_o = A_v v_s\\) from (1) in (2):\n\n\\[\ng_{m1}v_s + \\frac{(1 - A_v)v_s}{R_F} = I_{in}\n\\]\n\\[\nv_s = \\frac{I_{in}}{g_{m1} + (1 - A_v)/R_F}\n\\]\n\nTherefore\n\n\\[\n\\boxed{\\frac{v_o}{I_{in}} = \n\\frac{A_v}{g_{m1} + (1 - A_v)/R_F}}\n\\tag{3}\n\\]\n\nThis is the exact small‑signal transimpedance (with \\(r_o \\to \\infty\\)).\n\nUsing (1):\n\n\\[\n\\frac{v_o}{I_{in}} =\n\\frac{-g_{m1}g_{m2}R_{D1}R_{D2}}\n{g_{m1} + \\dfrac{1 + g_{m1}g_{m2}R_{D1}R_{D2}}{R_F}}\n\\]\n\n---\n\n### 4. High‑gain approximation\n\nIf the amplifier gain magnitude is large,\n\n\\[\n|A_v| = g_{m1}g_{m2}R_{D1}R_{D2} \\gg 1\n\\quad \\text{and} \\quad\n|A_v| \\gg g_{m1}R_F\n\\]\n\nthen\n\n\\[\n1 - A_v \\approx -A_v, \\quad\ng_{m1} + (1 - A_v)/R_F \\approx |A_v|/R_F\n\\]\n\nand (3) simplifies to\n\n\\[\n\\boxed{\\frac{v_o}{I_{in}} \\approx -R_F}\n\\]\n\nSo the circuit behaves like an ideal transimpedance amplifier whose gain is set almost entirely by \\(R_F\\).\n\n---\n\n### 5. Input resistance\n\n\\[\nR_{in} = \\frac{v_s}{I_{in}}\n       = \\frac{1}{g_{m1} + (1 - A_v)/R_F}\n\\]\n\nFor large \\(|A_v|\\),\n\n\\[\nR_{in} \\approx \\frac{R_F}{|A_v|}\n           = \\frac{R_F}{g_{m1}g_{m2}R_{D1}R_{D2}}\n\\]\n\nwhich is very small. Thus the input node is approximately at a “virtual ground”, and almost all of \\(I_{in}\\) flows through \\(R_F\\):\n\n\\[\nI_{RF} \\approx I_{in}, \\quad v_o \\approx -I_{in}R_F\n\\]\n\n---\n\n**Summary**\n\n- \\(M_1\\) (common gate) + \\(M_2\\) (common source) form a high‑gain inverting voltage amplifier with gain \\(A_v \\approx -g_{m1}g_{m2}R_{D1}R_{D2}\\).\n- Resistor \\(R_F\\) returns a current proportional to \\(v_o\\) to the input node (shunt–shunt negative feedback).\n- Closed‑loop transimpedance \\(v_o/I_{in}\\) is given by (3) and is approximately \\(-R_F\\) when the amplifier gain is large.\n- The input resistance is very low (\\(\\approx R_F/|A_v|\\)), so the input node is nearly at AC ground and the circuit operates as a current‑to‑voltage converter.",
        "format": "markdown",
        "sha256": "bb4d5d1fe653b357e58da5d6c3736ed08e97cd7ce86fdf5bfff6c290b98e87b4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input, forming a transimpedance amplifier.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9632,
        "total_tokens": 10276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8270,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9632,
        "total_tokens": 10276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8270,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a MOS transimpedance amplifier: it converts the input current \\(I_{in}\\) into an output voltage \\(v_{out}\\) with negative feedback through \\(R_F\\).\n\n---\n\n### Small‑signal analysis (ignore \\(\\lambda\\), i.e. \\(r_o\\to\\infty\\))\n\nLet the small‑signal voltage at the summing node (bottom node) be \\(v_s\\), node \\(X\\) be \\(v_x\\), and output be \\(v_o\\).  \nTransconductances are \\(g_{m1}, g_{m2}\\).\n\n#### 1. First stage (M1 with \\(R_{D1}\\))\n\nGate of \\(M_1\\) is ac‑grounded, input at the source → common‑gate stage.\n\nSmall‑signal gate–source voltage:\n\\[\nv_{gs1} = 0 - v_s = -v_s\n\\]\nDrain current (from node \\(X\\) to node \\(s\\)):\n\\[\ni_{d1} = g_{m1}v_{gs1} = -g_{m1}v_s\n\\]\n\nKCL at node \\(X\\):\n\\[\n\\frac{v_x}{R_{D1}} + i_{d1} = 0\n   \\Rightarrow \\frac{v_x}{R_{D1}} - g_{m1}v_s = 0\n\\]\n\\[\n\\boxed{v_x = g_{m1}R_{D1}v_s}\n\\]\n\n#### 2. Second stage (M2 with \\(R_{D2}\\))\n\nGate of \\(M_2\\) is at \\(v_x\\), source at ground → common‑source.\n\n\\[\nv_{gs2} = v_x, \\qquad i_{d2}=g_{m2}v_x\n\\]\n\nKCL at output node:\n\\[\n\\frac{v_o}{R_{D2}} + g_{m2}v_x = 0\n\\Rightarrow v_o = -g_{m2}R_{D2} v_x\n\\]\n\nUsing \\(v_x\\) from above:\n\\[\n\\boxed{v_o = -g_{m1}g_{m2}R_{D1}R_{D2}\\,v_s}\n\\]\n\nSo the open‑loop gain from node \\(s\\) to output is\n\\[\nA \\equiv \\frac{v_o}{v_s} = -g_{m1}g_{m2}R_{D1}R_{D2} \\quad(<0)\n\\]\n\n#### 3. Summing node with feedback\n\nCurrents leaving node \\(s\\):\n\n- through \\(R_F\\): \\((v_s - v_o)/R_F\\)\n- into \\(M_1\\) (source to drain): \\(g_{m1}v_s\\)\n\nThese must balance the input current \\(I_{in}\\) entering node \\(s\\):\n\n\\[\n\\frac{v_s - v_o}{R_F} + g_{m1}v_s - I_{in} = 0\n\\]\n\nSubstitute \\(v_o = Av_s\\):\n\n\\[\n\\left(\\frac{v_s - Av_s}{R_F}\\right) + g_{m1}v_s - I_{in} = 0\n\\]\n\\[\nv_s\\left[\\frac{1-A}{R_F} + g_{m1}\\right] = I_{in}\n\\]\n\n---\n\n### Transimpedance and input resistance\n\nTransimpedance:\n\\[\nZ_t \\equiv \\frac{v_o}{I_{in}}\n   = \\frac{Av_s}{I_{in}}\n   = \\frac{A}{\\dfrac{1-A}{R_F} + g_{m1}}\n   = \\boxed{\\frac{A R_F}{1 - A + g_{m1}R_F}}\n\\]\n\nSubstituting \\(A = -g_{m1}g_{m2}R_{D1}R_{D2}\\):\n\\[\n\\boxed{\nZ_t = \\frac{-g_{m1}g_{m2}R_{D1}R_{D2}R_F}\n           {1 + g_{m1}g_{m2}R_{D1}R_{D2} + g_{m1}R_F}\n}\n\\]\n\nInput resistance at node \\(s\\):\n\\[\nR_{in} \\equiv \\frac{v_s}{I_{in}}\n   = \\boxed{\\frac{1}{\\dfrac{1-A}{R_F} + g_{m1}}}\n\\]\n\n---\n\n### High‑gain approximation\n\nIf\n\\[\n|A| = g_{m1}g_{m2}R_{D1}R_{D2} \\gg 1,\\quad\n|A| \\gg g_{m1}R_F,\n\\]\nthen \\(1-A+g_{m1}R_F \\approx -A\\), so:\n\\[\nZ_t \\approx \\frac{A R_F}{-A} = \\boxed{-R_F}\n\\]\nand\n\\[\nR_{in} \\approx \\frac{R_F}{|A|} \\ll R_F\n\\]\n\nThus, with large loop gain, the circuit behaves like an ideal transimpedance amplifier:\n\n\\[\nv_{out} \\approx - I_{in} R_F\n\\]\n\nwith the input node held at a very low (almost zero) small‑signal voltage—i.e., a “virtual ground” for the input current.",
        "format": "markdown",
        "sha256": "6119ed9269d34836f0f3cae2f4de51e26f25679659b5df026c2e42e745faa9a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input node, forming a transimpedance amplifier. The derived high-gain result of approximately −RF is also consistent.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9833,
        "total_tokens": 10477,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8654,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 9833,
        "total_tokens": 10477,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8654,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a current‑to‑voltage converter (a regulated‑cascode\ntransimpedance stage) with very low input impedance.\n\n---\n\n### 1. Topology\n\nAssume long‑channel MOSFETs biased in saturation.\n\n- \\(M_1\\): NMOS, drain at \\(V_{\\text{out}}\\), source at the input node \\(X\\),\n  gate biased by \\(V_b\\) (AC ground).\n- \\(M_2\\): PMOS, source at \\(V_{DD}\\) (AC ground), drain at node \\(X\\),\n  gate at \\(V_{\\text{out}}\\).\n- \\(I_1\\): bias current source from \\(V_{DD}\\) to node \\(V_{\\text{out}}\\).\n- At node \\(X\\) a DC bias current source and the signal current source\n  \\(i_{in}\\) (arrow up) are connected.\n\nThe DC current sources only fix the operating point; for small‑signal they\nare open circuits.\n\nLet\n\\[\ng_{m1},\\, g_{ds1}=\\frac1{r_{o1}} \\quad\\text{for }M_1,\\qquad\ng_{m2},\\, g_{ds2}=\\frac1{r_{o2}} \\quad\\text{for }M_2\n\\]\nand denote the small‑signal voltages at nodes \\(X\\) and \\(V_{\\text{out}}\\) by\n\\(v_x\\) and \\(v_o\\).\n\n---\n\n### 2. Small‑signal equations\n\nAt node \\(X\\) (currents from node \\(X\\) into the devices):\n\n- Through \\(M_1\\) (source to drain):\n\\[\ni_{M1,s} = (g_{m1}+g_{ds1})v_x - g_{ds1}v_o\n\\]\n- Through \\(M_2\\) (drain to source, i.e. from node \\(X\\) to \\(V_{DD}\\)):\n\\[\ni_{M2,d} = g_{m2}v_o + g_{ds2}v_x\n\\]\n\nKCL at \\(X\\):\n\\[\ni_{in} = i_{M1,s} + i_{M2,d}\n\\]\n\\[\n\\Rightarrow (g_{m1}+g_{ds1}+g_{ds2})v_x +(-g_{ds1}+g_{m2})v_o = i_{in}\n\\tag{1}\n\\]\n\nAt node \\(V_{\\text{out}}\\) there is only \\(M_1\\) (the gate of \\(M_2\\) draws\nno current, and \\(I_1\\) is an open circuit in small signal):\n\nDrain current of \\(M_1\\) (from \\(V_o\\) to \\(X\\)):\n\\[\ni_{M1,d} = g_{ds1}v_o - (g_{m1}+g_{ds1})v_x\n\\]\n\nKCL at \\(V_o\\) (no external small‑signal current):\n\\[\ni_{M1,d}=0\n\\Rightarrow g_{ds1}v_o - (g_{m1}+g_{ds1})v_x = 0\n\\]\n\\[\n\\Rightarrow v_o = \\frac{g_{m1}+g_{ds1}}{g_{ds1}}\\,v_x\n\\tag{2}\n\\]\n\n---\n\n### 3. Transimpedance and input resistance\n\nUse (2) in (1). After substitution and simplification,\n\n\\[\nv_x = \\frac{i_{in}}{\\,g_{ds2} + g_{m2}\\dfrac{g_{m1}+g_{ds1}}{g_{ds1}}\\,}\n\\tag{3}\n\\]\n\nThe **input resistance** is\n\\[\nR_{in} = \\frac{v_x}{i_{in}}\n= \\frac{1}{g_{ds2} + g_{m2}\\dfrac{g_{m1}+g_{ds1}}{g_{ds1}}}\n\\tag{4}\n\\]\n\nThe **output voltage** is \\(v_o\\) from (2), so the **transimpedance gain**\n\\(R_T = v_o/i_{in}\\) is\n\n\\[\nR_T = \\frac{v_o}{i_{in}}\n= \\frac{g_{m1}+g_{ds1}}{g_{ds1}}\\;\n\\frac{1}{g_{ds2} + g_{m2}\\dfrac{g_{m1}+g_{ds1}}{g_{ds1}}}\n= \\frac{g_{m1}+g_{ds1}}{g_{ds1}g_{ds2} + g_{m2}(g_{m1}+g_{ds1})}\n\\tag{5}\n\\]\n\n---\n\n### 4. Useful approximations\n\nIn normal operation \\(g_m \\gg g_{ds}\\) (large intrinsic gain), so\n\n- \\(g_{m1} \\gg g_{ds1}\\) and usually \\(g_{m2}(g_{m1}+g_{ds1}) \\gg g_{ds1}g_{ds2}\\).\n\nThen\n\n\\[\nR_T \\approx \\frac{1}{g_{m2}}\n\\]\n\nand\n\n\\[\nR_{in} \\approx \\frac{1}{g_{m1}\\,g_{m2}\\,r_{o1}}\n\\]\n\nKey points:\n\n- The **input node has a very small resistance**,\n  set roughly by \\(1/(g_{m1}g_{m2}r_{o1})\\): the circuit presents a\n  near‑virtual ground to the input current (\\(i_{in}\\)).\n- The **output voltage is approximately**\n  \\[\n  v_{out} \\approx \\frac{i_{in}}{g_{m2}}\n  \\]\n  i.e. the circuit converts the input current to a voltage with a gain\n  controlled almost entirely by the transconductance of \\(M_2\\).\n\nThus \\(M_1\\) and the biasing form a high‑gain internal amplifier that,\nvia \\(M_2\\), regulates node \\(X\\) and makes the whole structure a\nlow‑input‑impedance, current‑to‑voltage converter whose gain is ~\\(1/g_{m2}\\).",
        "format": "markdown",
        "sha256": "df48295e1ab925fdac1ebd46483ea1b88e48eae0265e62781310cabc9b41d0d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device and PMOS feedback device driven by Vout, describes feedback to the input node, and derives the very low input resistance and transimpedance of approximately 1/gm2.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 14349,
        "total_tokens": 14993,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12994,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 14349,
        "total_tokens": 14993,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12994,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Consider the circuit as made of two nMOS transistors:\n\n- **M1**: drain at \\(V_{\\text{out}}\\), source at the lower node \\(V_X\\), gate biased by \\(V_b\\).\n- **M2**: drain at \\(V_{DD}\\), source at the same lower node \\(V_X\\), gate connected to \\(V_{\\text{out}}\\).\n- \\(I_1\\) is an ideal current source from \\(V_{DD}\\) to \\(V_{\\text{out}}\\).\n- The two current sources at the bottom set a dc current; their difference is the signal current \\(I_{in}\\) injected into node \\(V_X\\).\n\nAssume all MOSFETs operate in saturation and neglect body effect.\n\n---\n\n## 1. DC (large‑signal) behavior\n\nAt the output node \\(V_{\\text{out}}\\) there are only two elements: the current\nsource \\(I_1\\) and transistor M1.  \nWith no load at \\(V_{\\text{out}}\\),\n\n\\[\nI_{D1}=I_1 .\n\\]\n\nSo the drain current of M1 is fixed and therefore its overdrive\n\\(V_{ov1}\\) is fixed:\n\n\\[\nI_1 = \\frac{1}{2}k_{n1}\\frac{W_1}{L_1}(V_{b}-V_X-V_{th})^2 .\n\\]\n\nHence the source voltage\n\n\\[\nV_X = V_b - V_{th} - V_{ov1}\n\\]\n\nis essentially **constant**, independent of the signal current \\(I_{in}\\) (as long\nas M1 stays in saturation and \\(I_1\\) is not changed).\n\nThe dc current through M2 adjusts so that KCL at node \\(V_X\\) is satisfied:\n\n\\[\nI_{\\text{down}} = I_{in} + I_{D1} + I_{D2},\n\\]\n\nwhere \\(I_{\\text{down}}\\) is the lower bias current source.\nThus changes in \\(I_{in}\\) are primarily absorbed by changes in the current of\nM2; M1 current remains equal to \\(I_1\\).\n\n---\n\n## 2. Small‑signal analysis\n\nLet \\(v_x\\) and \\(v_o\\) be the small‑signal voltages at nodes \\(V_X\\) and\n\\(V_{\\text{out}}\\), and \\(i_{in}\\) the small‑signal current injected into \\(V_X\\).\n\n### (a) Node \\(V_{\\text{out}}\\)\n\nWith an ideal current source at the top and neglecting \\(r_{o1}\\) for clarity,\nonly M1 contributes:\n\n\\[\n\\text{Current leaving } V_{\\text{out}}: \\quad i_{d1} = g_{m1}(0 - v_x) = -g_{m1} v_x.\n\\]\n\nKCL at \\(V_{\\text{out}}\\): \\(i_{d1}=0 \\Rightarrow v_x = 0\\).\n\nSo node \\(V_X\\) is an **AC virtual ground**; the input node voltage is almost\nunchanged by the signal.\n\n### (b) Node \\(V_X\\)\n\nSince \\(v_x \\approx 0\\), the signal current \\(i_{in}\\) must be balanced by the\nchange in M2’s current (the lower bias current source is ideal and has no\nsmall‑signal).\n\nFor M2 (source at \\(V_X\\), drain at \\(V_{DD}\\approx 0\\), gate at \\(v_o\\)):\n\n\\[\ni_{d2} = g_{m2}(v_o - v_x) \\approx g_{m2} v_o .\n\\]\n\nTaking currents into node \\(V_X\\) as positive:\n\n\\[\ni_{in} + i_{d2} = 0 \\quad\\Rightarrow\\quad i_{in} + g_{m2} v_o = 0 .\n\\]\n\nHence the small‑signal output voltage is\n\n\\[\n\\boxed{v_o = -\\dfrac{i_{in}}{g_{m2}} } .\n\\]\n\n---\n\n## 3. Properties\n\n- **Function:** the circuit is a **transimpedance amplifier** (current‑to‑voltage\nconverter) implemented with MOSFETs.\n\n- **Transimpedance gain**\n\n  \\[\n  \\boxed{ \\dfrac{v_{\\text{out}}}{i_{in}} = -\\dfrac{1}{g_{m2}} }\n  \\]\n\n  (magnitude set by the transconductance of M2).\n\n- **Input impedance:** because \\(v_x \\approx 0\\), the small‑signal input\nimpedance is very low, ideally\n\n  \\[\n  r_{in} = \\dfrac{v_x}{i_{in}} \\approx 0,\n  \\]\n\n  so the input node behaves as a virtual ground (useful e.g. for\n  photodiode readout).\n\n- Including finite output resistances \\(r_{o1}, r_{o2}\\) makes \\(r_{in}\\)\n  small but non‑zero (and it can even become slightly negative), and slightly\n  modifies the transimpedance, but the basic behavior above remains:\n  low‑impedance input and gain approximately \\(-1/g_{m2}\\).",
        "format": "markdown",
        "sha256": "7f2fe73f45048a2f57ce9a3d2cfc08572b82ea27f41666ae3428aefc7a0291a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It captures the low input resistance and approximately 1/gm2 transimpedance through feedback, but explicitly misidentifies M2 as an NMOS and assigns it the wrong device polarity. The golden solution’s device-type rule assigns 1 for this error when the feedback result is otherwise recognized.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 23763,
        "total_tokens": 24407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 23763,
        "total_tokens": 24407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **current‑to‑voltage converter (transimpedance stage) using a\nregulated‑cascode input**.\n\n- \\(M_1\\) is an nMOS used in common–gate configuration (gate at bias \\(V_b\\)).\n- \\(M_2\\) is a pMOS whose gate senses \\(v_{out}\\) and injects current from\n\\(V_{DD}\\) into node \\(x\\).\n- The current sources at the bottom (one fixed, one equal to the input\n\\(I_{in}\\)) set the dc bias.\n- \\(I_1\\) biases \\(M_1\\) and provides output current.\n\nLet  \n\\(g_{m1},r_{o1}\\) be the transconductance and output resistance of \\(M_1\\);  \n\\(|g_{m2}|,r_{o2}\\) be those of \\(M_2\\) (we use \\(g_{m2}>0\\) for the pMOS\nmagnitude).\n\nDefine node \\(x\\) as the common source of \\(M_1\\) and drain of \\(M_2\\).\n\n---\n\n### Small‑signal equations\n\nIn small signal, \\(V_{DD}\\) is ac ground and all ideal current sources are open\ncircuits.  Nodes are \\(v_x\\) and \\(v_{out}\\).\n\nKCL at node \\(v_{out}\\):\n\n\\[\n\\frac{v_{out}-v_x}{r_{o1}} - g_{m1}v_x = 0\n\\quad\\Rightarrow\\quad\nv_{out} = (1+g_{m1}r_{o1})\\,v_x\n\\tag{1}\n\\]\n\nKCL at node \\(v_x\\) (take currents leaving node as positive):\n\n\\[\n\\frac{v_x-v_{out}}{r_{o1}} + g_{m1}v_x\n    + \\frac{v_x}{r_{o2}} - g_{m2}v_{out}\n    - I_{in} = 0\n\\tag{2}\n\\]\n\nUse (1) in (2):\n\n\\[\nv_x\\bigl[\\frac{1}{r_{o2}} - g_{m2}(1+g_{m1}r_{o1})\\bigr] = I_{in}\n\\]\n\nso\n\n\\[\n\\boxed{\\frac{v_x}{I_{in}} =\n \\frac{1}{\\frac{1}{r_{o2}}-g_{m2}(1+g_{m1}r_{o1})}}\n\\]\n\nand, using (1),\n\n\\[\n\\boxed{\\frac{v_{out}}{I_{in}} =\n\\frac{1+g_{m1}r_{o1}}\n     {\\frac{1}{r_{o2}}-g_{m2}(1+g_{m1}r_{o1})}}\n\\tag{3}\n\\]\n\nThis is the **exact transimpedance**.\n\n---\n\n### Useful approximations\n\nFor typical operation  \n\\(g_{m1}r_{o1}\\gg1\\), \\(g_{m2}r_{o2}\\gg1\\), so\n\\(\\frac{1}{r_{o2}}\\ll g_{m2}(1+g_{m1}r_{o1})\\).  \nThen (3) simplifies to\n\n\\[\n\\frac{v_{out}}{I_{in}} \\approx\n-\\frac{1}{g_{m2}}\n\\]\n\nand\n\n\\[\nR_{in}\n= \\left|\\frac{v_x}{I_{in}}\\right|\n\\approx\n\\frac{1}{g_{m2}(1+g_{m1}r_{o1})}\n\\approx\n\\frac{1}{g_{m1}g_{m2}r_{o1}}\n\\]\n\nKey points:\n\n- **Transimpedance**: \\(v_{out} \\approx -I_{in}/g_{m2}\\); it is set mainly by\nthe transconductance of \\(M_2\\), almost independent of device output\nresistances.\n- **Input resistance** (seen by \\(I_{in}\\)) is very small,\nsuppressed by the loop gain \\(g_{m2}(1+g_{m1}r_{o1})\\); the circuit\nbehaves like a virtual ground at node \\(x\\).\n- This is therefore a **low‑impedance current input stage** (useful, e.g., as\na transimpedance amplifier for sensors) implemented by a regulated‑cascode\nstructure.",
        "format": "markdown",
        "sha256": "b8e2db7cafac4afb72420ca63fb0ac8a714ca3f321624c90e474c2b7d729a873"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, and describes feedback to the input node. It gives the very low input resistance and the expected transimpedance magnitude, approximately 1/gm2; the negative sign is a valid polarity convention.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 19057,
        "total_tokens": 19701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18077,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 644,
        "output_tokens": 19057,
        "total_tokens": 19701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18077,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No.  \nAs long as the capacitors are **finite**, the 3‑stage ring oscillator will still oscillate; the frequency just becomes very small.\n\nEach inverter has a propagation delay\n\n\\[\nt_p \\approx k\\,R_{\\text{eq}}C_L\n\\]\n\nso the period of a 3‑stage ring oscillator is approximately\n\n\\[\nT \\approx 2N t_p = 6k\\,R_{\\text{eq}}C_L\n\\]\n\nand the frequency\n\n\\[\nf \\approx \\frac{1}{T} \\propto \\frac{1}{C_L}.\n\\]\n\nIncreasing \\(C_L\\) only increases the delay; it does not create a stable dc logic state (with an odd number of inverters no such state exists except the unstable mid‑rail point). Thus, for any finite \\(C_L\\) the loop will still alternate between logic 0 and 1, just more slowly.\n\nOnly in the unphysical limit \\(C_L \\to \\infty\\) (i.e., infinite delay) would the oscillation cease, because the node voltages could never change.",
        "format": "markdown",
        "sha256": "5930d9d917857bf45b7f98157a710906af21f85f34c7586318f70190e4e61adc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that any finite added capacitance slows the ring but does not stop oscillation, and supports this with the delay scaling as C_L. The infinite-capacitance limit is only a caveat and does not undermine the answer for arbitrarily large finite capacitors.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1216,
        "output_tokens": 5033,
        "total_tokens": 6249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4795,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1216,
        "output_tokens": 5033,
        "total_tokens": 6249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4795,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No.  \n\nFor any **finite** value of the three capacitors the ring oscillator will still oscillate; the oscillation just becomes slower.\n\nEach stage’s delay is roughly\n\n\\[\nt_p \\propto R_{\\text{eq}} C_L\n\\]\n\nso the oscillation period is\n\n\\[\nT \\approx 2 N t_p \\propto C_L ,\n\\]\n\nwith \\(N=3\\) stages. As \\(C_L\\) is increased, \\(T\\) grows linearly and the frequency \\(f=1/T\\) decreases, but there is no finite \\(C_L\\) at which oscillation suddenly stops—the loop still has no stable dc operating point (only an unstable one), so it will eventually move toward one rail and start toggling.\n\nOnly in the unphysical limit \\(C_L \\to \\infty\\) would the period go to infinity and the circuit appear not to oscillate.",
        "format": "markdown",
        "sha256": "a527755d05a152b0b0632199af4ec97136f9b2e5fdf474d9fc752bfe89dfe410"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors can be made arbitrarily large while the ring continues oscillating at a lower frequency, and supports this with the valid delay-proportional-to-capacitance argument. The extra DC-startup explanation does not undermine the essential answer.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1216,
        "output_tokens": 3737,
        "total_tokens": 4953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3540,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1216,
        "output_tokens": 3737,
        "total_tokens": 4953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3540,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No.  \n\nFor any **finite** value of the three capacitors, the ring will still oscillate; the oscillation frequency just becomes lower.\n\nModel each inverter with its load as a first‑order stage\n\n\\[\nH(s)=\\frac{-A_0}{1+s\\tau}, \\qquad \\tau \\approx R_{\\text{out}} C_L\n\\]\n\nFor three stages in a ring:\n\n\\[\nL(s)=H(s)^3\n\\]\n\nThe Barkhausen phase condition is\n\n\\[\n\\angle L(j\\omega_0) = 2\\pi\n\\]\n\nwhich gives\n\n\\[\n3\\big(\\pi - \\arctan(\\omega_0\\tau)\\big) = 2\\pi\n\\Rightarrow \\arctan(\\omega_0\\tau) = \\frac{\\pi}{3}\n\\Rightarrow \\omega_0\\tau = \\sqrt{3}\n\\]\n\nSo\n\n\\[\n\\omega_0 = \\frac{\\sqrt{3}}{\\tau} \\propto \\frac{1}{C_L}\n\\]\n\nAs \\(C_L\\) increases, \\(\\tau\\) increases and the oscillation frequency decreases proportionally, but the normalized quantity \\(\\omega_0\\tau\\) stays equal to \\(\\sqrt{3}\\), so the required phase shift is always obtainable.\n\nThe loop gain magnitude at this frequency is\n\n\\[\n|L(j\\omega_0)| = \\frac{A_0^3}{(1+(\\omega_0\\tau)^2)^{3/2}}\n= \\frac{A_0^3}{(1+3)^{3/2}} = \\frac{A_0^3}{8}\n\\]\n\nwhich is independent of \\(C_L\\). If each inverter’s low‑frequency gain \\(A_0 > 2\\), then \\(A_0^3/8 > 1\\) and the amplitude condition for oscillation is satisfied regardless of how large \\(C_L\\) is.\n\nSo:\n\n- For any finite, however large, \\(C_L\\): oscillator still runs, just more slowly.\n- Only in the unphysical limit \\(C_L \\to \\infty\\) (nodes cannot change voltage) would oscillation cease.",
        "format": "markdown",
        "sha256": "90c3b7fbb0704c46269a469e3787f02647ddab7b36b5dd76e5568c07bcfa0f8a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors slow the ring without stopping oscillation, and supports this with the per-stage phase condition and frequency scaling as 1/CL. The loop-gain condition is also correctly independent of capacitance.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1216,
        "output_tokens": 5711,
        "total_tokens": 6927,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5235,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1216,
        "output_tokens": 5711,
        "total_tokens": 6927,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5235,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this 3‑stage ring oscillator, if you only double the three load capacitors \\(C_L\\) (keeping the inverters, bias current and supply voltage the same):\n\n- The oscillation frequency roughly halves: \\(f_0 \\propto 1/C_L\\).\n- The phase‑noise spectrum (for a fixed absolute offset \\(\\Delta f\\)) improves by about 6 dB.\n\nUsing the usual ring‑oscillator result  \n\n\\[\nL(\\Delta f)\\approx \\frac{4kT\\gamma}{3P}\\,\\frac{f_0^{2}}{\\Delta f^{2}},\n\\]\n\npower \\(P\\) stays constant while \\(f_0 \\rightarrow f_0/2\\), so \\(L\\) becomes one quarter (6 dB lower).\n\nNotes:\n- At a fixed *relative* offset (\\(\\Delta f/f_0\\)), the phase noise stays approximately the same.\n- If instead you increased the drive current so that the frequency stayed constant when \\(C_L\\) doubled, the phase noise would improve by about 3 dB (because power doubles).",
        "format": "markdown",
        "sha256": "81c55e0d5f6358e68a00bbda3914d950e611545211078d56803f229a3c57eaa3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and lowers phase noise by about 6 dB at a fixed absolute offset, with the expected scaling explanation. The fixed-relative-offset note is also correct.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1213,
        "output_tokens": 8328,
        "total_tokens": 9541,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1213,
        "output_tokens": 8328,
        "total_tokens": 9541,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling all three load capacitors reduces the phase noise.\n\nFor a CMOS ring oscillator the single‑sideband phase‑noise density (white‑noise region) is approximately\n\n\\[\nL(\\Delta\\omega) \\propto \\frac{kT}{E_{\\text{osc}}} \\frac{1}{\\Delta\\omega^{2}}\n\\]\n\nand the oscillation energy is mainly in the capacitors:\n\n\\[\nE_{\\text{osc}} \\propto C_L V_{\\text{DD}}^{2}.\n\\]\n\nSo\n\n\\[\nL(\\Delta\\omega) \\propto \\frac{1}{C_L}.\n\\]\n\nIf each \\(C_L\\) is doubled, the total stored energy doubles and the phase‑noise density is halved, i.e. it improves by about **3 dB**, while the oscillation frequency is reduced by roughly a factor of two.",
        "format": "markdown",
        "sha256": "6c527bd1b8f1c435ae5cc5236801f5ef8bce2e2a4f465275d150a081b20a81e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly says the oscillation frequency is roughly halved and phase noise decreases, but gives a 3 dB reduction instead of the expected 6 dB (factor of four) at a fixed offset. Its capacitor-energy argument misses the frequency dependence.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1213,
        "output_tokens": 10515,
        "total_tokens": 11728,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10327,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1213,
        "output_tokens": 10515,
        "total_tokens": 11728,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10327,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the three capacitors increases the delay of each stage (so the oscillation\nfrequency is roughly halved), but it does **not significantly change the phase noise**.\n\nReason in brief:  \n- The thermal/noise voltage on each node scales as \\( \\sqrt{kT/C} \\), so when \\(C\\) is\ndoubled the voltage noise decreases by \\(1/\\sqrt{2}\\).  \n- The edge slope at the switching point scales as \\(dV/dt \\propto 1/C\\); doubling \\(C\\)\ntherefore halves the slope.  \n- The timing jitter per edge is \\(\\Delta t \\approx \\Delta V/(dV/dt)\\); the reduced noise\nvoltage and reduced slope cancel so that \\(\\Delta t\\) (and hence phase noise) is\nessentially unchanged.\n\nSo, doubling the capacitors lowers the oscillation frequency but leaves the phase noise (in dBc/Hz) approximately the same.",
        "format": "markdown",
        "sha256": "702ee987251d7f6346b5d03e262276ef0887be932ee05637224fce4c0f610aa5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly predicts that doubling the capacitors roughly halves the oscillation frequency, but its central conclusion is wrong at a fixed offset: phase noise should decrease by about a factor of four (6 dB), not remain unchanged. The unchanged result applies only at a fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1213,
        "output_tokens": 11863,
        "total_tokens": 13076,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1213,
        "output_tokens": 11863,
        "total_tokens": 13076,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No.  \n\nFor a ring oscillator of inverters the oscillation period is approximately  \n\n\\[\nT \\approx 2\\sum_{i} t_{p,i}\n\\]\n\nand for the stage driving \\(C_L\\),\n\n\\[\nt_{p,1} \\propto R_{\\text{eq}} C_L .\n\\]\n\nSo as \\(C_L\\) is made larger, the propagation delay of that stage grows linearly, and the oscillation frequency\n\n\\[\nf \\approx \\frac{1}{T}\n\\]\n\ndecreases roughly as \\(1/C_L\\).  \nFor any finite \\(C_L\\) the capacitor will still eventually charge and discharge past the inverter thresholds, so the ring continues to oscillate—just more and more slowly.\n\nOnly in the unphysical limit \\(C_L \\to \\infty\\) (infinite time constant) would the circuit stop oscillating. In practice, very large \\(C_L\\) is limited by leakage and other non‑idealities, but there is no theoretical finite \\(C_L\\) at which the oscillator must fail.",
        "format": "markdown",
        "sha256": "7416737515c673348d58a0ceb3d7f1213993757fa630b98b257fa1a62e219ec5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion: a sufficiently large capacitor on one node can create a dominant pole and prevent oscillation. Its RC-delay observation is relevant for moderate loading, but it incorrectly assumes the oscillator must continue at every finite load and misses the loop-gain failure.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1213,
        "output_tokens": 4680,
        "total_tokens": 5893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4451,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1213,
        "output_tokens": 4680,
        "total_tokens": 5893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4451,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For a 3‑stage ring oscillator built from **ideal** inverters the answer is *no*:  \n\n- Each inverter still eventually charges or discharges its output to a logic level, no matter how large a **finite** \\(C_L\\) is.  \n- The only effect of increasing \\(C_L\\) is to increase the delay of that stage, so the oscillation period grows (roughly proportional to \\(C_L\\)) and the frequency tends to zero as \\(C_L \\to \\infty\\). There is no finite value of \\(C_L\\) at which oscillation must stop in this ideal model.\n\nFor a **real** CMOS inverter, which has finite small‑signal gain \\(A\\), the situation is different. Modeling each stage as\n\n\\[\nH_i(s) = \\frac{-A}{1+s R C_i}\n\\]\n\nand letting the middle stage have \\(C_2 = C_0 + C_L\\) while the others have \\(C_0\\), the loop transfer is\n\n\\[\nT(s) = H_1(s)H_2(s)H_3(s).\n\\]\n\nRequiring a purely imaginary root of \\(1-T(s)=0\\) (onset of oscillation) gives\n\n\\[\nA^3 = 4 + 2\\beta + \\frac{2}{\\beta},\\qquad\n\\beta \\equiv \\frac{C_2}{C_0} = 1 + \\frac{C_L}{C_0}.\n\\]\n\nThus oscillation is possible only if\n\n\\[\n\\beta \\le \\beta_{\\max} \\approx \\frac{A^3}{2} \\;\\;\\Rightarrow\\;\\;\nC_L \\lesssim \\left(\\frac{A^3}{2}-1\\right)C_0.\n\\]\n\nSo for sufficiently large \\(C_L\\) (large \\(\\beta\\)), the loop gain is < 1 at every frequency and the ring settles to a dc operating point instead of oscillating.\n\nSummary:\n\n- **Ideal model:** any finite \\(C_L\\) → oscillation continues, just slower; it only “fails” in the unphysical limit \\(C_L=\\infty\\).  \n- **Real inverter with finite gain:** there *is* a maximum \\(C_L\\); if \\(C_L\\) is made arbitrarily large, beyond that limit the circuit will indeed fail to oscillate.",
        "format": "markdown",
        "sha256": "dcef7142fd73fc757124fbc956ff316d26a607b2c2ba4efd35fc2259428eeb12"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that sufficiently large loading of one node can stop oscillation and models the resulting pole imbalance with a finite-gain loop. However, the claim that loop gain is below unity at every frequency is inaccurate: the relevant condition is its magnitude at the phase-crossover frequency, and the DC loop gain may still exceed unity.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1213,
        "output_tokens": 14246,
        "total_tokens": 15459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13735,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1213,
        "output_tokens": 14246,
        "total_tokens": 15459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13735,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No.  \n\nFor any **finite** value of \\(C_L\\) the ring oscillator will still oscillate; the\noscillation just becomes slower.\n\n- At dc a capacitor is an open circuit, so even with a very large \\(C_L\\) the\nloop is still just three inverters in series with an odd number of inversions.\nThat loop has no stable dc logic state (only an unstable operating point near\nthe switching threshold), so it cannot settle; it must keep changing state.\n\n- A larger \\(C_L\\) only increases the delay of the stage that drives it:\n\\[\nt_{pd} \\propto R_\\text{out} C_L ,\n\\]\nso the oscillation period \\(T \\approx 2\\sum t_{pd}\\) grows roughly linearly\nwith \\(C_L\\) and the frequency \\(f = 1/T\\) decreases roughly as \\(1/C_L\\).\n\nIn the mathematical limit \\(C_L \\to \\infty\\), the node voltage cannot change\n(\\(dV/dt = I/C_L \\to 0\\)) and the oscillation frequency tends to zero, but\nthere is no finite value of \\(C_L\\) at which the circuit suddenly stops\noscillating.",
        "format": "markdown",
        "sha256": "a69e9836905bf21561e2682599c31985cd8a9c9b338287225b6727e8fb6de0bc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that a larger load slows the stage, but gives the opposite answer to the central question: sufficiently large capacitance on one node can create a dominant pole and prevent the loop from meeting the oscillation condition at a finite load.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1213,
        "output_tokens": 7062,
        "total_tokens": 8275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1213,
        "output_tokens": 7062,
        "total_tokens": 8275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths of all the NMOS and PMOS devices (keeping \\(L\\) and \\(V_{DD}\\) the same) roughly halves the phase‑noise power:\n\n- \\(g_m \\propto W\\) and the load capacitance \\(C_L \\propto W\\), so the delay (and hence oscillation frequency) stays about constant.\n- The noise current increases with \\(g_m\\), but it is integrated on a larger capacitance, so the resulting noise voltage—and hence timing jitter—scales approximately as \\(1/\\sqrt{W}\\).\n- Jitter variance and phase‑noise power therefore scale as \\(1/W\\).\n\nSo, doubling \\(W\\) → phase noise improves by about a factor of 2 (≈ 3 dB lower), at the cost of roughly 2× higher power.",
        "format": "markdown",
        "sha256": "abaebe487822c5aead692f853e017ab4e2afa26d1145e664e0b3de6935190e23"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives about a 3 dB phase-noise reduction and explains the width, capacitance, noise, and power scaling consistently with the golden solution.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 4266,
        "total_tokens": 5206,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4088,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 4266,
        "total_tokens": 5206,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4088,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths of all NMOS and PMOS devices (keeping \\(V_{DD}\\) and number of stages the same) **reduces the phase noise.**\n\nReason:\n\n- Device width \\(W\\) ↑2 ⇒ transconductance \\(g_m \\propto W\\) ↑2 ⇒ channel noise current PSD  \n  \\( \\overline{i_n^2} = 4kT\\gamma g_m \\) ↑2.\n- Node capacitances \\(C \\propto W\\) ↑2 ⇒ maximum charge swing \\(q_{\\max} = C V_{DD}\\) ↑2 and stored energy \\(E = \\tfrac12 C V_{DD}^2\\) ↑2.\n- Using Hajimiri/Leeson‑type results for ring oscillators, white phase noise scales as  \n\n  \\[\n  L(\\Delta \\omega) \\propto \\frac{\\overline{i_n^2}}{q_{\\max}^2}\n  \\propto \\frac{W}{(W)^2} = \\frac{1}{W}.\n  \\]\n\nSo doubling \\(W\\) halves \\(L(\\Delta \\omega)\\): **about a 3‑dB improvement (lower phase‑noise level) at a given offset**, while power consumption roughly doubles and oscillation frequency stays nearly the same.",
        "format": "markdown",
        "sha256": "890e989231bdd1f80cdc0f06b1683c277f513bcdde56c001bb6e5e68d22307f1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts about a 3 dB phase-noise reduction and gives a consistent scaling argument: device noise power doubles while signal charge doubles, reducing the noise-to-signal ratio by half.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 4960,
        "total_tokens": 5900,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4681,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 4960,
        "total_tokens": 5900,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4681,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths of both the NMOS and PMOS devices:\n\n- Doubles their \\(g_m\\) and also (approximately) doubles the node capacitances.\n- Hence the delay per stage \\(t_d \\sim C/I\\) stays roughly the same, so the oscillation frequency is almost unchanged.\n- Dynamic power \\(P \\propto C V_{DD}^2 f\\) therefore doubles (since \\(C\\) doubles and \\(f\\) is unchanged).\n\nFor a ring oscillator, phase noise \\(L(\\Delta f)\\) is inversely proportional to the signal power:\n\n\\[\nL(\\Delta f) \\propto \\frac{kT}{P}\n\\]\n\nSo, with \\(P\\) doubled, the phase noise power density is halved:\n\n**Phase noise improves (decreases) by about 3 dB when all transistor widths are doubled.**",
        "format": "markdown",
        "sha256": "00f46d7ae0f42f65956b651f76783afd3db351efc147f2e20aaa1685158063f0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling all device widths reduces phase noise by about 3 dB. The frequency and power-scaling explanation is consistent with the result.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 2982,
        "total_tokens": 3922,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2796,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 2982,
        "total_tokens": 3922,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2796,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It cannot be determined from the information given.\n\nThe “small‑signal resistance” seen looking into the VDD node is, by definition,\n\n\\[\nR_X=\\left.\\frac{\\partial v_{DD}}{\\partial i_{DD}}\\right|_{\\text{bias}}\n\\]\n\nfor the ring oscillator.  \nThis quantity depends on the small‑signal model of each inverter (their \\(g_m\\), \\(r_o\\), capacitive loads, etc.) and on the operating point (bias voltage, oscillation amplitude, frequency). With only a block diagram of three ideal inverters, there is no unique value of \\(R_X\\); different transistor implementations or bias points will give different results.\n\nTo obtain \\(R_X\\) one would need the transistor‑level schematic and parameters, then:\n\n1. Linearize each inverter about the chosen operating point to get its small‑signal model.\n2. Form the 3‑stage loop with those models.\n3. Apply a small test voltage at the VDD node, compute the resulting incremental current into the ring, and take \\(R_X = v_{\\text{test}}/i_{\\text{test}}\\).\n\nWithout that device information, \\(R_X\\) cannot be specified numerically or even as a simple formula.",
        "format": "markdown",
        "sha256": "9583dd90a1ea73d139cc40cf3677dcb89b0176ef9e3a18f534829a704fbc0806"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It misses the dominant oscillation-driven charging and discharging of the node capacitances, and incorrectly concludes that no useful formula can be given. Mentioning capacitance and frequency as unspecified dependencies is only limited relevant understanding.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 936,
        "output_tokens": 13303,
        "total_tokens": 14239,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13040,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 936,
        "output_tokens": 13303,
        "total_tokens": 14239,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13040,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Model each inverter around its metastable point (inputs and outputs at \\(V_{DD}/2\\)).  \nAssume the NMOS and PMOS are in saturation with equal transconductance \\(g_m\\) and large \\(r_o\\).\n\nLet a small-signal voltage \\(v_x\\) be applied at the common supply node.  \nFor inverter \\(i\\):\n\n- PMOS source at \\(v_x\\), gate at the previous stage output \\(v_{i-1}\\).\n- NMOS source at ground, gate at \\(v_{i-1}\\).\n\nAt the output node of inverter \\(i\\) the KCL (no capacitance at dc) gives\n\n\\[\ng_m (v_x - v_{i-1}) = g_m v_{i-1}\n\\]\n\nso\n\n\\[\nv_{i-1} = \\frac{v_x}{2}.\n\\]\n\nBy symmetry, all three node voltages equal \\(v_x/2\\).\n\nThe small-signal current drawn from the supply by each PMOS is\n\n\\[\ni_{DD,i} = g_m (v_x - v_{i-1}) = g_m \\left(v_x - \\frac{v_x}{2}\\right)\n            = \\frac{g_m}{2} v_x .\n\\]\n\nWith three inverters, the total supply current is\n\n\\[\ni_{DD} = 3 \\cdot \\frac{g_m}{2} v_x = \\frac{3 g_m}{2} v_x .\n\\]\n\nThus the small-signal resistance seen looking into the supply node is\n\n\\[\nR_x = \\frac{v_x}{i_{DD}} = \\frac{1}{\\frac{3 g_m}{2}}\n    = \\boxed{\\frac{2}{3 g_m}} .\n\\]",
        "format": "markdown",
        "sha256": "ef07617a249b0cb33d076f9728e938036d2d6c21e8b3f298438ff0074a98523b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance and ignores the oscillation-driven charging and discharging of the load capacitances, which sets the supply-node resistance. The golden solution explicitly assigns this internally consistent static analysis a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 936,
        "output_tokens": 15455,
        "total_tokens": 16391,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 936,
        "output_tokens": 15455,
        "total_tokens": 16391,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Model each stage at its operating point (around the switching threshold):\n\nFor one CMOS inverter at \\(V_{out}=V_{DD}/2\\) (both devices in saturation and\nsymmetric), the drain current is\n\n\\[\nI_D=\\frac{1}{2}\\beta (V_{DD}/2 - V_{TH})^{2}\n\\]\n\nThe transconductance of either device is\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}}\n      = \\beta (V_{DD}/2 - V_{TH})\n\\]\n\nNow the small‑signal change of current drawn from the supply of one inverter\nfor a small change in \\(V_{DD}\\) is\n\n\\[\n\\frac{\\partial I_D}{\\partial V_{DD}}\n= \\frac{\\partial I_D}{\\partial (V_{DD}/2)} \\cdot \\frac{\\partial (V_{DD}/2)}{\\partial V_{DD}}\n= g_m \\cdot \\frac{1}{2} = \\frac{g_m}{2}\n\\]\n\nThus the small‑signal conductance seen at the supply node of a single inverter is\n\\(g_{inv} = g_m/2\\), so its resistance is \\(R_{inv}=2/g_m\\).\n\nThe three inverters of the ring oscillator are in parallel at the supply node, so\ntheir conductances add:\n\n\\[\ng_X = 3 \\cdot \\frac{g_m}{2}\n\\]\n\nTherefore the small‑signal resistance seen looking into the supply node is\n\n\\[\n\\boxed{R_X = \\frac{1}{g_X} = \\frac{2}{3 g_m}}\n\\]\n\nwhere \\(g_m\\) is the transconductance of either the NMOS or PMOS at the\nswitching point (equivalently,\n\\(R_X = \\dfrac{4}{3(g_{mn}+g_{mp})}\\) since \\(g_{mn}=g_{mp}=g_m\\)).",
        "format": "markdown",
        "sha256": "b8c1843a1c5eac5846117d0d003bf3f184f6c7697311ca3f5eb5098729f87904"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It derives a static gm-based resistance, 2/(3gm), and ignores the oscillation-driven charging and discharging of the load capacitances that determine the supply resistance. The golden solution explicitly assigns this kind of internally consistent static analysis a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 936,
        "output_tokens": 11040,
        "total_tokens": 11976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10618,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 936,
        "output_tokens": 11040,
        "total_tokens": 11976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10618,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, it does change – in fact, the expression you wrote only makes sense **when the ring is *not* oscillating.**\n\n### Why the original answer is \\(R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)\\)\n\nThat result comes from a **small‑signal, time‑invariant** linearization around a DC operating point where:\n\n- each inverter’s input and output are held at the same DC voltage (near \\(V_{DD}/2\\)),  \n- both the NMOS and PMOS are on, and  \n- for AC they look like two diode‑connected devices in series: \\(1/g_{mp}\\) from \\(V_{DD}\\) to the output node, then \\(1/g_{mn}\\) to ground.\n\nThree identical inverters in parallel then give the factor \\(1/3\\).\n\nThis analysis implicitly assumes a **fixed bias point** (even though for a 3‑stage ring it is actually an *unstable* equilibrium).\n\n### What changes when the ring is actually oscillating\n\nIn steady oscillation:\n\n- The node voltages are **large‑signal, time‑varying** waveforms swinging between 0 and \\(V_{DD}\\).\n- For most of the period, in each inverter **one device is off** and the other is (almost) a switch to a rail, so:\n  - supply current is nearly zero except during transitions,\n  - the “diode‑connected” picture is no longer valid.\n- The instantaneous incremental conductance \\(\\partial I_{DD}/\\partial V_{DD}\\) becomes **strongly time‑varying** over the oscillation period; it is not a single constant equal to \\(1/(1/g_{mn} + 1/g_{mp})\\).\n\nYou can still define:\n\n- an **instantaneous** small‑signal resistance \\(R_X(t) = \\left(\\partial I_{DD}/\\partial V_{DD}\\right)^{-1}\\), which changes with time, or\n- an **effective low‑frequency** resistance based on the *average* current vs. \\(V_{DD}\\) (using dynamic‑power formulas \\(I_{\\text{avg}}\\approx C_\\text{eff} V_{DD} f\\)), but that will be set by capacitances and switching activity, not simply by \\(g_{mn}\\) and \\(g_{mp}\\), and it is generally much larger than \\((1/3)(1/g_{mn}+1/g_{mp})\\).\n\n### Bottom line\n\n- The expression \\(R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)\\) is the small‑signal resistance **of the linearized ring at the unstable DC point** (useful for start‑up/oscillation‑condition analysis).\n- Once the circuit is in full‑swing oscillation, the system is no longer LTI around a DC point, so that constant \\(R_X\\) is **no longer valid**; the “resistance” seen looking into the supply becomes time‑varying and must be treated with a large‑signal/periodic small‑signal analysis instead.",
        "format": "markdown",
        "sha256": "c7e928cd1a2c7a28bd5754b87d4316b4dfd042c1031b50109e84343c62f23619"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that oscillation makes the DC small-signal model inapplicable and mentions capacitive switching current, but incorrectly concludes the effective resistance is generally much larger because devices are off most of the cycle. The golden solution says it remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2032,
        "output_tokens": 13064,
        "total_tokens": 15096,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11688,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1016,
        "output_tokens": 6532,
        "total_tokens": 7548,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5844,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes – once the ring is actually oscillating, that expression is no longer the right (or even a well‑defined) “small‑signal resistance” for the supply node.\n\n### Why the original expression is valid only in the *non‑oscillating* case\n\nThe derivation\n\n\\[\nR_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)\n\\]\n\nimplicitly assumes:\n\n1. **A time‑invariant operating point**: all three inverters sit at a fixed bias voltage.\n2. **That fixed bias is around mid‑supply**: input ≈ output ≈ \\(V_{DD}/2\\), so each inverter behaves as\n   - an NMOS with gate tied to drain, and  \n   - a PMOS with gate tied to drain,  \n   in series between VDD and GND → two diode‑connected devices.\n\nThis bias is the *DC equilibrium* of an odd‑number ring: every node at \\(V_{DD}/2\\). It’s unstable, but for infinitesimal perturbations you can linearize around it to do the usual small‑signal startup analysis. Around that bias, each inverter is a linear two‑port, and looking into VDD you get the stated resistance.\n\n### What changes when the ring is oscillating\n\nIn steady oscillation:\n\n- Node voltages are **not constant**; they swing over (almost) the full 0–\\(V_{DD}\\) range.\n- The transconductances \\(g_{mn}\\) and \\(g_{mp}\\) of each device become **strong functions of time**: during most of the period one of the devices is nearly OFF, the other is either charging or discharging a capacitor.\n- The supply current is a **train of pulses** charging/discharging capacitances, not a DC bias current through two diode‑connected transistors.\n\nConsequences:\n\n1. There is no single time‑invariant small‑signal resistance \\(R_X\\) you can assign to the VDD node.  \n   If you linearize at each instant, you get a **time‑varying incremental conductance** \\(g_X(t)\\), periodic at the oscillation frequency.\n\n2. The *average* relation between supply voltage and current is dominated by dynamic power\n   \\[\n   P \\sim \\alpha C_\\text{load} V_{DD}^2 f_\\text{osc},\n   \\]\n   not by the “bias” conductances \\(g_{mn}, g_{mp}\\). In an ideal CMOS ring with rail‑to‑rail swings, the DC (static) conductance is essentially zero except for leakage and brief short‑circuit intervals.\n\nSo the expression\n\n\\[\nR_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}} + \\frac{1}{g_{mp}}\\right)\n\\]\n\nis only meaningful **for the non‑oscillating, linearized operating point** (the metastable \\(V_{DD}/2\\) point used in startup analysis). Once the circuit is oscillating, that model no longer applies and \\(R_X\\) becomes a periodically time‑varying quantity rather than a constant resistance.",
        "format": "markdown",
        "sha256": "9cf4c74f56b1e2272e1f06ef5ef7218b7063946370f559199e3847a8919dc024"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies switching and load capacitances as the source of dynamic power, but does not derive the effective average supply resistance or show that it remains on the order of the MOS on-resistance. It instead concludes that no constant resistance can be assigned.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2032,
        "output_tokens": 13268,
        "total_tokens": 15300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1016,
        "output_tokens": 6634,
        "total_tokens": 7650,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No – the *expression* for \\(R_X\\) does not change, but its **range of validity** does.\n\n- The result  \n  \\[\n  R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n  \\]  \n  comes from **linearizing** each inverter around a DC operating point where both\n  transistors conduct and their gates are tied to their drains (diode‑connected).\n  At that point each stage indeed looks like two resistances \\(1/g_{mp}\\) and\n  \\(1/g_{mn}\\) in series, and the three stages are in parallel, hence the factor\n  \\(1/3\\).\n\n- Whether the ring is stable (no oscillation) or unstable (it will start to\n  oscillate) does **not** change this local small‑signal derivative. You can\n  still define it at that DC point; it’s the same calculation.\n\n- Once the ring has grown to a **large‑signal oscillation**, however, the\n  transistors no longer sit near that bias point: each stage spends most of the\n  time with one device on and the other off, and the operating point is\n  time‑varying over the period. In that situation there is no single constant\n  “small‑signal resistance” seen from the supply; instead you would have a\n  time‑varying impedance \\(R_X(t)\\), whose period average is not given by the\n  above formula.\n\nSo:\n\n- For small‑signal analysis about the (unstable) DC operating point used in\n  start‑up analysis, the answer is still  \n  \\(\\displaystyle R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\\).\n\n- For the **running oscillator**, this number no longer describes the actual\n  supply impedance; the impedance becomes nonlinear and time‑varying.",
        "format": "markdown",
        "sha256": "bdd6ed2c27f1d2354b36954ef530846a2e1eca8127b7d6cbe8ef96fb72effd15"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly distinguishes the unstable DC small-signal calculation from the running oscillator, but gives no capacitive charging/discharging mechanism or estimate showing that the average supply resistance remains on the order of the MOS on-resistance. It leaves the key magnitude question unanswered.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2032,
        "output_tokens": 22196,
        "total_tokens": 24228,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1016,
        "output_tokens": 11098,
        "total_tokens": 12114,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10672,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As the width of M7 is increased, its current capability rises and the tail current of the latch increases.  \nThis larger current increases the gm of the input pair only as √I, but it decreases the output resistances (ro of M1–M4 and of M7 itself) roughly as 1/I.  \nSince the small‑signal gain is proportional to gm·ro, the reduction in ro dominates, so the **initial voltage gain decreases as M7 becomes wider** (after M7 is large enough not to limit conduction, further widening only reduces gain).",
        "format": "markdown",
        "sha256": "35995cb06ed4ed494a00ee0b7ba476c4e38278b4ee73fbc5c4e51c75f336338b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The trend and the increase in tail current are correct, and the answer recognizes that input-pair gm grows sublinearly with current. However, it attributes the initial gain change to a static gm·ro model rather than the StrongARM integration gain, which falls roughly with gm/ICM.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 5791,
        "total_tokens": 6730,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5669,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 5791,
        "total_tokens": 6730,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5669,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the width of M7 makes the tail device stronger (larger current), but for the differential operation the tail node is essentially at ac ground, so the regeneration loop is set by M1–M6.  \nTherefore, once M7 is large enough to stay in saturation, **further increasing its width does not appreciably change the initial voltage gain** (it mainly affects speed and power, not gain).",
        "format": "markdown",
        "sha256": "996f1a2a3e62cb3ae349f12d03a437804ebb9cc545fe4c0e8c3efb2df0c8ffa5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that a wider M7 increases tail current, but incorrectly concludes that this does not affect initial gain. The essential trend is that initial gain decreases as M7 width and tail current increase.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 11590,
        "total_tokens": 12529,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11500,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 11590,
        "total_tokens": 12529,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11500,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As the width of M7 is increased, its output resistance \\(r_{o7}\\) becomes smaller (since the tail current increases).  \nThe effective output resistance seen at the latch nodes is then reduced, so the small‑signal gain\n\n\\[\nA_v^{(0)} \\approx g_{m,\\text{diff}} \\cdot R_{\\text{out}}\n\\]\n\ndecreases because \\(R_{\\text{out}}\\) is dominated by \\(r_{o7}\\).  \n\nTherefore, the **initial voltage gain decreases as M7 is made wider** (while regeneration speed increases).",
        "format": "markdown",
        "sha256": "7c54b6624238b2b51d3c36a5be15aca4c3dcdf01d77b1f2b2e4e2eed8c71395c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The trend is correct, and the answer notes that widening M7 raises tail current. But it incorrectly attributes the gain drop to r_o7 dominating the differential output resistance. The initial gain instead falls because greater tail current shortens the integration interval and reduces the relevant gm/ICM factor.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 9963,
        "total_tokens": 10902,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9836,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 9963,
        "total_tokens": 10902,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9836,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at nodes **P** and **Q** lowers the initial voltage gain.\n\nReason: the differential current produced by the input pair (M1–M2) charges/discharges the capacitances at P and Q. The initial change of voltage there is\n\n\\[\n\\Delta V_{P,Q}(t) \\approx \\frac{\\Delta I}{C_{P,Q}}\\, t \\propto \\frac{g_m\\,\\Delta V_{in}}{C_{P,Q}} t\n\\]\n\nso for a given input difference and time after the clock edge, a larger \\(C_{P,Q}\\) gives a smaller \\(\\Delta V_{P,Q}\\). Since this small differential voltage is what the regenerative latch sees as its initial condition, the effective initial gain from input to output is reduced (and the comparator becomes slower), although the final latched gain remains essentially infinite.",
        "format": "markdown",
        "sha256": "0f7e8fe647aa217cdad166a1a6ab1fd1129dd1b50151c9c266bc9db06fc50886"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance reduces the voltage slope and slows the comparator, but it incorrectly concludes that the initial gain decreases. The longer amplification phase compensates for the smaller slope, leaving the initial gain approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 4445,
        "total_tokens": 5384,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 4445,
        "total_tokens": 5384,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at nodes **P** and **Q** reduces the initial voltage gain.\n\nReason: the initial differential voltage at P and Q is generated by the input pair currents charging/discharging the capacitances at these nodes. The slope is\n\n\\[\n\\frac{d(V_P - V_Q)}{dt} \\propto \\frac{g_m \\Delta V_{in}}{C_{P,Q}}\n\\]\n\nso for a fixed time interval, the developed voltage (and hence the “initial gain”) is inversely proportional to the capacitance. Larger \\(C_{P,Q}\\) ⇒ slower voltage change ⇒ smaller initial gain (though final full-swing gain remains).",
        "format": "markdown",
        "sha256": "7a05f0f184e0383d81964551432f6bd6518ae28799c584d4602843875b2a2198"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is wrong: increasing capacitance slows the transient but leaves the initial gain approximately unchanged. The answer notes the reduced voltage slope, but incorrectly treats the amplification interval as fixed and misses that its duration increases proportionally, canceling the capacitance effect.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 3733,
        "total_tokens": 4672,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 3733,
        "total_tokens": 4672,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at nodes P and Q **reduces the initial voltage gain**.\n\nReason: the input differential pair produces roughly the same current for a given input. That current charges/discharges the capacitances at P and Q; with larger C, the voltage change at these nodes (ΔV = I·Δt/C) is smaller. Thus, the differential signal that excites the regenerative latch is smaller, so the initial input‑to‑output gain (and speed) are reduced, even though the eventual regenerative gain remains very large.",
        "format": "markdown",
        "sha256": "a6b8e2d4f25490866c60e70014d68b33ef335ec284edb03d5a6cc56992b31c2a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite to the essential result: larger capacitance slows the transient but does not reduce initial gain, because the longer amplification phase compensates. The answer recognizes the slower node-voltage change but misses this cancellation.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 3767,
        "total_tokens": 4706,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3651,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 3767,
        "total_tokens": 4706,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3651,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of M5 and M6 generally **improves (increases) the speed** of this latch comparator.\n\n- M5 and M6 are part of the cross‑coupled latch; enlarging them increases their transconductance \\(g_m\\), strengthening the positive feedback and reducing the regeneration time constant \\( \\tau \\approx C_\\text{node}/g_m \\).\n- Their larger width also increases the parasitic capacitance at nodes X and Y, but that capacitance is only part of the total node capacitance. Thus \\(g_m\\) increases more, in relative terms, than \\(C\\), so \\(C/g_m\\) decreases and the latch resolves faster.\n\nPast some size, added capacitance begins to offset the \\(g_m\\) gain, so the speed benefit saturates, but it does **not** degrade for moderate increases.",
        "format": "markdown",
        "sha256": "6d5fa197d0aa5802ff2e1cee7099fb2184835014e948b343d21d7f718136ec75"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says widening M5/M6 initially improves speed by strengthening latch regeneration, while added node capacitance eventually limits the benefit. This captures the required trend and sizing tradeoff.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 938,
        "output_tokens": 7213,
        "total_tokens": 8151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7028,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 938,
        "output_tokens": 7213,
        "total_tokens": 8151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7028,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M5 and M6 form (part of) the regenerative latch.  \nMaking them wider increases their transconductance \\(g_m\\), so they can pull the\nnodes \\(X\\) and \\(Y\\) toward the rails more strongly and the regeneration time\nconstant \\(\\tau \\approx C/g_m\\) becomes smaller. Hence the latching (decision)\nspeed increases.\n\nHowever, the larger devices also add capacitance to nodes \\(X\\) and \\(Y\\) and\nload the previous stage more, so the benefit saturates and after some point can\nslightly slow the overall circuit and increase power.\n\nSo, for moderate sizing increases, speed improves; there is an optimum size\nbeyond which extra width no longer helps.",
        "format": "markdown",
        "sha256": "407c35f5aa464ffab2a04ad88df1c793eec25881749895191e124842df03f585"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M5/M6 initially strengthens regeneration and improves speed, while added capacitance eventually limits the benefit and creates an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 938,
        "output_tokens": 6389,
        "total_tokens": 7327,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6231,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 938,
        "output_tokens": 6389,
        "total_tokens": 7327,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6231,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of M5 and M6 generally **makes the latch faster**.\n\n- M5–M6 form the (PMOS) part of the cross‑coupled regenerative pair.  \n- When their width is increased, their \\(g_m\\) and current drive increase, so the regeneration time constant  \n  \\(\\tau \\approx C_\\text{node}/g_{m,\\text{eff}}\\) becomes smaller.\n- Their larger width also increases the parasitic capacitance at nodes X and Y, which slightly increases \\(C_\\text{node}\\), but in practice the increase in \\(g_m\\) dominates, so \\(\\tau\\) decreases and the decision (latching) time is reduced.\n\nSo, to first order, widening M5 and M6 **improves the speed (reduces delay)**, though with diminishing returns and at the cost of more capacitance, power, and input loading.",
        "format": "markdown",
        "sha256": "842176b9b2ea8801cf52d734dcc2c1eeaee8fe73e3cb0b56034428e5e0a64451"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the initial speed improvement from stronger regeneration and notes that added capacitance limits the benefit, with diminishing returns.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 938,
        "output_tokens": 8676,
        "total_tokens": 9614,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8480,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 938,
        "output_tokens": 8676,
        "total_tokens": 9614,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8480,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors **degrades the speed** of this circuit (once they are large enough not to be the main resistance bottleneck).\n\n- Making them wider reduces their on‑resistance, but it also **increases their diffusion and gate capacitances** on the internal dynamic nodes \\(X\\) and \\(Y\\) and on the clock.\n- In this structure the delay is dominated by the logic / M1 devices; the clocked devices already have low enough resistance. Enlarging them mainly adds capacitance without giving a useful reduction in series resistance.\n- The RC time constants at \\(X\\), \\(Y\\), and on the clock therefore increase, so both evaluation and precharge become slower.\n\nHence, oversizing the clocked transistors slows the circuit; they are usually kept close to minimum size for best speed.",
        "format": "markdown",
        "sha256": "ac3719315e903cea08e372e50624675ef736e59b576844cbe75d50b8a23c9353"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the resistance–capacitance tradeoff but concludes that widening the clocked devices degrades speed because the data-driven devices dominate. The golden solution requires the initial speed improvement and assigns this opposite conclusion 2.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 5725,
        "total_tokens": 6387,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5546,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 5725,
        "total_tokens": 6387,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5546,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors **degrades the overall speed** (after some minimal sizing).\n\n- Making them wider slightly reduces their on‑resistance, but\n- It **significantly increases** their gate and diffusion capacitances, which:\n  * increases the capacitive load seen by the clock, slowing the clock edges, and  \n  * increases the capacitance of internal nodes X and Y, enlarging their RC time constants.\n\nSince the flip‑flop’s delay is dominated by the internal nodes and the clock distribution, this extra capacitance outweighs the resistance reduction. Thus, wider clocked devices lead to slower operation and higher clock power.",
        "format": "markdown",
        "sha256": "7994c1be365d3739c320c39fcf645d22fe102c08604cbb409e5107771aa4cb08"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that widening lowers on-resistance but argues capacitance makes speed degrade. The key expected trend is that widening initially improves speed, with capacitance limiting or reversing the benefit only beyond an optimum.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 8371,
        "total_tokens": 9033,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8229,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 8371,
        "total_tokens": 9033,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8229,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors (those driven by CK and \\(\\overline{CK}\\)) generally **degrades the speed** of this circuit.\n\nReason:\n\n- A larger width slightly reduces their ON‑resistance, but these devices are not the dominant resistance in the critical data path; M1 and the inverter usually are.\n- Width increase **directly increases** the diffusion and gate capacitances on the internal nodes \\(X\\) and \\(Y\\) and, importantly, on the clock line.\n- The propagation delay is roughly \\(t_d \\approx R_{\\text{eq}} C_{\\text{load}}\\). Since \\(R_{\\text{eq}}\\) barely improves while \\(C_{\\text{load}}\\) increases, the RC time constant grows, so transitions on \\(X\\), \\(Y\\), and hence at \\(Z\\) become slower.\n- The heavier clock load can also slow the clock edges for the whole chip.\n\nSo, making the clocked transistors wider than necessary makes the flip‑flop slower; they are usually kept near minimum size.",
        "format": "markdown",
        "sha256": "b91a75217d8ea6747cba72c06d24364c55276630c4bed8a1a04665f9f91c2655"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer concludes that widening degrades speed, contrary to the expected initial improvement from reduced on-resistance. Added capacitance can eventually limit or reverse the benefit, but does not justify the stated overall trend.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 7623,
        "total_tokens": 8285,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7395,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 7623,
        "total_tokens": 8285,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7395,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes – when this cell is used as a divide‑by‑2 (i.e., as a T flip‑flop with feedback so it toggles every clock edge), the internal nodes give quadrature phases.\n\n- The left half is the “master” latch (node **X**).\n- The right half is the “slave” latch (node **Y**, and after Inv₃, **Z**).\n\nIn divide‑by‑2 operation, the flip‑flop state toggles on every edge of **CK**:\n\n- **X** changes state on the rising edges of **CK**.\n- **Y** (and thus **Z**) change state on the falling edges of **CK**, half a clock period later.\n\nSince the output frequency is half the clock frequency, that half‑clock delay corresponds to one‑quarter of the output period, i.e. 90°. Thus:\n\n- **X** and **Y** (or **X** and **Z**) are 90° out of phase.\n- Together with their complements, they provide four quadrature phases.\n\nIf the flip‑flop is not configured as a divide‑by‑2 (i.e., it carries arbitrary data), then the signals are not inherently quadrature.",
        "format": "markdown",
        "sha256": "206280267b908d65bf17ccd109ed56a28d2a93be9028f2ef1d279ae19ee09fac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature from the half-clock-period offset, but gives only the ideal timing argument and omits both causes of nonexact quadrature: Inv₃ delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 647,
        "output_tokens": 9111,
        "total_tokens": 9758,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 647,
        "output_tokens": 9111,
        "total_tokens": 9758,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No.  \n\nThis circuit is a symmetric dynamic latch / buffer driven by two complementary clocks (CK and \\(\\overline{\\text{CK}}\\)). The internal nodes X and Y, and the output Z, switch in response to these two clock phases, so any two nodes are either essentially in phase (0°) or complementary (≈180°).  \n\nQuadrature outputs would require signals that are 90° apart in phase (e.g., 0° and 90° or 0°, 90°, 180°, 270°), which this two‑phase structure cannot generate by itself.",
        "format": "markdown",
        "sha256": "07946b871530be9fa7eafbd191db7b829db7fdea91afae60e37abde3efb34f03"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is wrong: this divide-by-two has latches switching on opposite clock edges, giving nominal quadrature. The answer misidentifies the structure and claims its two-phase clocks preclude quadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 647,
        "output_tokens": 4488,
        "total_tokens": 5135,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4360,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 647,
        "output_tokens": 4488,
        "total_tokens": 5135,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4360,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes – the circuit can provide quadrature outputs.\n\nIt is a divide‑by‑2 latch: nodes **X** and **Y** are the outputs of two latching stages clocked on opposite phases (CK and \\(\\overline{\\text{CK}}\\)).  \nEach node toggles at **half the input‑clock frequency**, but X changes state half a clock period earlier than Y.\n\nIf the clock period is \\(T_{\\text{CK}}\\), then:\n\n- The period of X and Y is \\(T_{\\text{out}} = 2T_{\\text{CK}}\\).\n- The time shift between X and Y is \\(T_{\\text{CK}}/2 = T_{\\text{out}}/4\\).\n\nA shift of one‑quarter of the period corresponds to **90°**, so X and Y are in quadrature.  \nNode Z is just a buffered version of Y; to obtain two usable quadrature outputs you would buffer both X and Y.",
        "format": "markdown",
        "sha256": "03db2568c4f50d808bcede4951e39e8ae3b62e25008ccfeae7308dbb76bc905e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the ideal divide-by-two timing that makes X and Y nominally quadrature. It does not explain why the phases are not exact: Inv3 adds delay to Z, and the latch outputs see unequal loads.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 647,
        "output_tokens": 9625,
        "total_tokens": 10272,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 647,
        "output_tokens": 9625,
        "total_tokens": 10272,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the **clocked** transistors (those driven by CK and \\(\\overline{\\text{CK}}\\)) gives them a smaller on‑resistance, but it also makes their gate and diffusion capacitances larger.  \n\nIn this latch the clocked devices are mainly used as “gating” switches for the inverters; their resistance is usually not the dominant term in the data path delay. When you widen them:\n\n- The reduction in series resistance gives only a small improvement to the local D‑to‑Q delay.\n- The increase in their gate capacitance loads the clock heavily and slows the clock edges and clock‑to‑Q delay.\n- Their larger diffusion capacitances also add to internal node loading.\n\nOverall, the added capacitance dominates, so the **effective speed of the circuit (and of the clocked system using it) degrades or at best shows negligible improvement** when you increase the widths of the clocked transistors beyond minimum sizing.",
        "format": "markdown",
        "sha256": "27dc21ca6aade3c7b3aaeaf1a96146f48d14f0f3299164af7d13ac84589ec642"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion: in this topology, widening the clocked devices lowers series resistance and improves speed, while their added capacitance is mostly on internal nodes. Charge sharing can degrade swing but is acceptable up to a point.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1324,
        "output_tokens": 11160,
        "total_tokens": 12484,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10752,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 5580,
        "total_tokens": 6242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5376,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the latch itself, making the clocked devices wider **increases its speed**.\n\n- The four clock‑controlled transistors are in series with the pull‑up/pull‑down devices of the inverters.  \n- Increasing their width reduces their on‑resistance, so the internal nodes charge and discharge faster → shorter D‑to‑Q / clk‑to‑Q delay.\n- Most of the extra capacitance goes onto the clock lines, not the data nodes; hence the intrinsic latch delay decreases.\n\nHowever, the larger clocked devices put a heavier capacitive load on the clock distribution network, which can slow the clock edges and increase power and skew. So:\n\n- **Locally (within this circuit):** speed improves with wider clocked transistors, up to a point of diminishing returns.  \n- **Globally (including the clock tree):** too‑wide clocked devices can hurt overall system speed and power.",
        "format": "markdown",
        "sha256": "107c5ab26e03217242971bd29f2285c7d64804bdc1f915a80719f521ddbfc72a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that wider clocked transistors improve speed because their lower on-resistance helps the data path. However, it omits charge sharing, which degrades the swing and limits the improvement, and its claim that added capacitance is mostly on the clock lines is imprecise.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1324,
        "output_tokens": 14100,
        "total_tokens": 15424,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13708,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 7050,
        "total_tokens": 7712,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6854,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the **clocked** transistors does **not** make this register faster in any useful way; overall speed tends to *degrade* (or at best stays almost unchanged).\n\nReason:\n\n- When you widen a clocked device, its on‑resistance ↓ (good for speed) but its diffusion and gate capacitances ↑ in proportion to width.\n- The internal node delay is roughly \\(t \\approx R_\\text{on} C_\\text{node}\\). Since \\(R_\\text{on} \\propto 1/W\\) and \\(C_\\text{node} \\propto W\\), their product is nearly constant, so the data path through the latch gains very little.\n- The gate capacitances of these transistors are connected directly to the **clock**. Making them wider therefore loads the clock heavier, so the local clock edge becomes slower, which *increases* clock‑to‑Q delay and dynamic power.\n\nSo upsizing the clocked transistors mainly hurts the clock and gives negligible improvement in the data path, meaning overall speed is effectively worse.",
        "format": "markdown",
        "sha256": "fbdc88ca7627edfe5c6c60bac73171627c57b16a0cf65202a4b69fc67bd7e7c0"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer predicts degradation or no meaningful improvement, contrary to the topology’s considerable speed improvement: the clocked devices add little loading to the data path. This misses the central result.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1324,
        "output_tokens": 11368,
        "total_tokens": 12692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10908,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 662,
        "output_tokens": 5684,
        "total_tokens": 6346,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a clocked inverter chain with feedback from its output to its input.  \nTwo transmission gates (or switches) are driven by complementary clocks CK and \\(\\overline{\\text{CK}}\\).\n\nLabel the output of the last inverter as \\(Q\\) and the node between Inv\\(_1\\) and the second switch as \\(X\\).\n\n**1. CK = 1 (high)**  \n- Left switch (CK) is ON, right switch (\\(\\overline{\\text{CK}}\\)) is OFF.  \n- \\(Q\\) is fed through the left switch and Inv\\(_1\\):  \n  \\[\n  X = \\overline{Q}\n  \\]\n- Because the right switch is open, \\(X\\) does not reach the last two inverters; \\(Q\\) keeps its previous value.\n\n**2. CK = 0 (low)**  \n- Left switch OFF, right switch ON.  \n- Node \\(X\\) is now isolated from \\(Q\\) and holds its value \\(\\overline{Q}\\) (dynamic storage).  \n- This value propagates through the last two inverters and back to \\(Q\\):\n  \\[\n  Q_{\\text{new}} = \\overline{\\overline{X}} = \\overline{\\overline{\\overline{Q_{\\text{old}}}}}\n  = \\overline{Q_{\\text{old}}}\n  \\]\nSo after one full clock period \\(Q\\) becomes the complement of its previous value: the circuit toggles its output once per clock cycle.\n\n**Conclusion**\n\nThe arrangement implements a **T flip‑flop / divide‑by‑2 frequency divider**:\n\n- \\(Q\\) changes state on each clock cycle,\n- Therefore the output frequency is \\(f_Q = \\frac{1}{2} f_{\\text{CK}}\\).\n\nInternal node \\(X\\) is stored dynamically, so the clock must not be too slow (to avoid leakage).",
        "format": "markdown",
        "sha256": "76f9873652a3e3dd91e847dcc87ba21a3ee0d588cd1f870ee5caffaf79d8cbcb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic-latch divide-by-two and explains that the output toggles once per clock period, producing half the clock frequency.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 923,
        "output_tokens": 9017,
        "total_tokens": 9940,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8602,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 923,
        "output_tokens": 9017,
        "total_tokens": 9940,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8602,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Label the important nodes:\n\n- Q : output of the last inverter (rightmost).\n- X : output of the first inverter (Inv₁).\n\nThere are two transmission gates (drawn as switches):\n\n- Left switch controlled by CK.\n- Right switch controlled by \\(\\overline{CK}\\).\n\n### When CK = 0\n- Left switch (CK) is OPEN → feedback from Q to Inv₁ is cut.\n- Right switch (\\(\\overline{CK}\\)) is CLOSED → X is connected to the two following inverters.\n- Thus Q is just a buffered version of X (two inverters), i.e.  \n  \\(Q = X\\).  \n  The circuit holds whatever logic level is presently stored.\n\n### When CK = 1\n- Left switch (CK) is CLOSED → Q is applied to the input of Inv₁.\n- Right switch (\\(\\overline{CK}\\)) is OPEN → X is isolated from Q.\n- Inv₁ now outputs the complement of Q:  \n  \\(X = \\overline{Q}\\).  \n  Q itself does not change during this phase (because its path from X is open).\n\n### On the next CK falling edge (CK:1→0)\n- Left switch opens, right switch closes.\n- The value \\(X = \\overline{Q_{old}}\\) is now driven through the two inverters to Q, so\n  \\[\n  Q_{new} = X = \\overline{Q_{old}}.\n  \\]\n\nSo on every full clock period Q becomes the complement of its previous value:\n\n\\[\nQ_{k+1} = \\overline{Q_k}\n\\]\n\nThis arrangement is therefore a **T flip‑flop (toggle flip‑flop)** or **divide‑by‑2 circuit**: the output toggles once per clock cycle, giving an output frequency equal to half the input clock frequency.",
        "format": "markdown",
        "sha256": "841561dc6a98ea9416e4cdb8ab495bc108cb41c11dc65c002dabc6d1f58be494"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a divide-by-two and explains the phase-controlled sampling and holding that toggles the output once per clock period.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 923,
        "output_tokens": 6766,
        "total_tokens": 7689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6366,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 923,
        "output_tokens": 6766,
        "total_tokens": 7689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6366,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The network is a **dynamic divide‑by‑2 (toggle) flip‑flop** built only with inverters and two clocked switches.\n\nLabel the nodes:\n\n- \\(Q\\): output (rightmost inverter output, also fed back at the bottom).\n- \\(X\\): node between the CK‑controlled switch and the input of inverter \\(Inv_1\\).\n- \\(Y\\): output of \\(Inv_1\\) (between \\(Inv_1\\) and the \\(\\overline{CK}\\)‑controlled switch).\n\nThere are two more inverters after the \\(\\overline{CK}\\) switch; their total effect is just **two inversions**, so the signal at \\(Y\\) appears **unchanged** at the output \\(Q\\) when it propagates through them.\n\n---\n\n### Phase 1 – CK = 1, \\(\\overline{CK}=0\\)\n\n- Left switch (CK) ON: \\(X\\) is tied to \\(Q\\).\n- Right switch (\\(\\overline{CK}\\)) OFF: \\(Y\\) is isolated from the output chain.\n\nSo:\n\n\\[\nX = Q, \\quad Y = \\overline{X} = \\overline{Q}\n\\]\n\nThe output \\(Q\\) does **not change** during this phase, but its complement \\(\\overline{Q}\\) is stored dynamically on node \\(Y\\) (on its capacitance).\n\n---\n\n### Phase 2 – CK = 0, \\(\\overline{CK}=1\\)\n\n- Left switch OFF: \\(X\\) (hence the input of \\(Inv_1\\)) is left floating; it retains charge.\n- Right switch ON: the stored value \\(Y\\) is now connected to the two following inverters.\n\nThrough the two inverters:\n\n\\[\nQ_{\\text{new}} = Y = \\overline{Q_{\\text{old}}}\n\\]\n\nThus, on each **falling edge** of CK, the output is replaced by its complement.\n\nSo if \\(Q_n\\) is the output after the \\(n\\)-th cycle,\n\n\\[\nQ_{n+1} = \\overline{Q_n}\n\\]\n\nwhich means the circuit toggles its state every clock cycle:\n\n- Functionally it is a **T flip‑flop with \\(T=1\\)** (or equivalently a D flip‑flop with \\(D=\\overline{Q}\\)).\n- It divides the clock frequency by 2 (output frequency \\(f_Q = f_{CK}/2\\)).\n\nBecause node \\(Y\\) is only held by capacitance between phases, this is a **dynamic** implementation: the clock period must be short enough that leakage does not corrupt the stored charge.",
        "format": "markdown",
        "sha256": "2f6656474e98ad2e29659a27841a1a6ec78b023c7a3dbd9142bf74fa29d0dc5f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic divide-by-two and explains that the output toggles once per clock cycle, producing half the clock frequency. Internal signal details are secondary under the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 923,
        "output_tokens": 10404,
        "total_tokens": 11327,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9827,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 923,
        "output_tokens": 10404,
        "total_tokens": 11327,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9827,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the clock CK disables the black inverter `Inv₁` (CK = 0,  **CK̅** = 1), the only closed feedback path is\n\n`node X → red inverter → node after Inv₁ → → next two inverters → node X`.\n\nSo the active loop contains **three** inverters: the red one plus the two right‑hand black ones, giving the required 180° phase shift (odd number of inversions) and allowing the circuit to oscillate.\n\nWithout the red inverter, with CK = 0 the loop would contain only the two right‑hand inverters (an even number of inversions) and it would settle to a DC level — no oscillation.\n\nPerformance-wise, the red inverter:\n\n- Provides the extra 180° phase shift needed for oscillation when CK enables the loop.  \n- Adds its own propagation delay and load, so the oscillation period is that of a 3‑stage ring instead of a 2‑stage loop (which couldn’t oscillate anyway), and it consumes additional power/area.",
        "format": "markdown",
        "sha256": "b0b7979ca6761691f3ebf8fe0c202262a3227fe1d67b795352af9dc61133ac6f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the three-inverter loop, but treats oscillation as the intended performance effect and says the red inverter merely adds delay. It misses the feedforward speed benefit and the key low-frequency drawback: the unclocked branch can raise the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 15618,
        "total_tokens": 16546,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15391,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 15618,
        "total_tokens": 16546,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15391,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter provides **feedback** from the output of the first stage (Inv₁) back to its input.  \nThis turns the purely dynamic chain of clocked inverters into a **pseudo‑static** register: when the\nclock is not propagating data, the feedback inverter keeps the node at its last logic value and\nprevents it from drifting because of leakage.\n\nPerformance impact:\n\n* **Advantages**\n  * Retains the stored value indefinitely (no minimum clock frequency).\n  * Improves robustness against leakage and noise on that node.\n\n* **Disadvantages**\n  * The feedback inverter loads the node and, during a transition, momentarily *fights* the change\n    (contention), so:\n    * Propagation delay through Inv₁ increases → **maximum operating frequency is reduced**.\n    * Extra short‑circuit current flows → **dynamic power increases**.\n\nSo the red inverter makes the circuit more robust (pseudo‑static) but slows it down and increases\npower compared to the chain without it.",
        "format": "markdown",
        "sha256": "950a1e79e6c8a1995cbf47ca98e9dd5d4c7ac6f83e1b1978a80a19bd102b511c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the red inverter as feedback/keeper rather than an unclocked feedforward path. It also reverses both key effects: the path improves high-speed operation, but raises the minimum usable clock frequency because it can overwhelm the main path at low rates.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 10799,
        "total_tokens": 11727,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10583,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 10799,
        "total_tokens": 11727,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10583,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **gated ring oscillator**.  \nThe extra (red) inverter is used only when the oscillator is enabled and it\nreplaces the first black inverter in the loop.\n\n- When **CK = 0** (oscillator ON):  \n  The left switch is open and the right switch is closed, so the oscillation\npath is\n\n  `… → last inverter → node at bottom → red inverter → node after Inv₁ → switch → next inverters → …`\n\n  Thus the closed loop contains **three inverters** (red + the two right‑hand\nblack ones). Inv₁ is bypassed and does not contribute delay.\n\n- When **CK = 1** (oscillator OFF):  \n  The left switch is closed and the right switch is open, so the loop is\nbroken and the ring stops.\n\nSo the red inverter’s purpose is to keep an **odd number of inversions in the\nactive loop without adding another series delay element**, letting the enabled\noscillator run at essentially the same frequency as a normal 3‑stage ring\noscillator. The main side effect is a bit more load (and power) on the node\nthat drives the red inverter, but its impact on speed is small compared with\nadding another full delay stage.",
        "format": "markdown",
        "sha256": "d74f1c3c8b1850f4f878e1d5452f45e9e204c1e0b37b6eb0fed4d27fb4892578"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the three-inversion loop and that the red inverter bypasses Inv1, but misidentifies the circuit as a gated ring oscillator. It misses the divider speed benefit and the key low-frequency drawback: the unclocked branch can corrupt division and raise the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 7578,
        "total_tokens": 8506,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7306,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 7578,
        "total_tokens": 8506,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7306,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No, that explanation is not quite right.\n\nThe red inverter is **not** just a weak “keeper” hanging on a floating dynamic node.  \nTogether with `Inv₁` it forms a **full static latch** (two cross‑coupled inverters).\n\n### What it actually does\n\nLabel the node between the left clocked switch and `Inv₁` as **X**, and the node at the output of `Inv₁` (before the right switch) as **Y**.\n\nThe red inverter is connected so that:\n\n- its **input** is at Y (output of `Inv₁`), and  \n- its **output** is at X (input of `Inv₁`).\n\nThus `Inv₁` and the red inverter are back‑to‑back inverters:\n\n- Y = ¬X  (from `Inv₁`)\n- X = ¬Y  (from red inverter)\n\nWhen the left CK‑controlled switch is OFF, node X would otherwise be floating.  \nBecause of the red inverter, X and Y now form a positive‑feedback pair with two\nstable states (0/1 or 1/0). That is a **static latch**, able to hold its state indefinitely as long as VDD is present.\n\nSo:\n\n- Without the red inverter, that internal node is **dynamic** and would leak, giving a minimum clock‑frequency requirement.\n- With the red inverter, the storage is **static**. The min‑frequency limitation of that node is removed because the value is held by DC feedback, not by charge on a capacitor.\n\nCalling it a “keeper” is somewhat misleading; its main role is to **turn that stage into a static latch** by providing full regenerative feedback, not just weak leakage compensation.",
        "format": "markdown",
        "sha256": "21d6db2e35c8522ccf7317d69a728755d7d9f875dcb88e24c25ada5627645659"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter’s connections as cross-coupled feedback. It is actually an unclocked feedforward branch that bypasses part of the latch path; it can help at high speed but can overpower the intended behavior at low clock rates, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 973,
        "output_tokens": 12210,
        "total_tokens": 13183,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11841,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 973,
        "output_tokens": 12210,
        "total_tokens": 13183,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11841,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No.  \nThe red inverter is **not** a keeper and it does **not** form a cross‑coupled latch with `Inv1`, so it does not remove any minimum–clock‑frequency requirement.\n\nLook at the connections:\n\n- The input of the **red** inverter and the input of `Inv1` are both driven from the same node (the ring node at the far left, through the CK switch).\n- The output of the red inverter is tied to the output of `Inv1` (the node between `Inv1` and the \\(\\overline{CK}\\) switch).\n\nThus the two inverters are **in parallel**, not cross‑coupled. There is no positive‑feedback loop between them; they simply both drive the same node with the same logical value (\\(\\overline{A}\\) if the left node is \\(A\\)) when CK is high.\n\nWhat the red inverter actually does is:\n\n- When \\(CK = 0\\) and \\(\\overline{CK} = 1\\):  \n  – The CK switch is open, so `Inv1` is disconnected from the loop.  \n  – The red inverter still connects the left node to the node before the \\(\\overline{CK}\\) switch, and that node is connected through the right‑hand inverters back to the left.  \n  – The loop then consists of the red inverter plus the right‑hand inverters, giving an odd number of inversions, so the circuit oscillates.\n\n- When \\(CK = 1\\) and \\(\\overline{CK} = 0\\):  \n  – The \\(\\overline{CK}\\) switch is open, so the loop is broken and oscillation stops.  \n  – `Inv1` and the red inverter both drive the intermediate node, but it is no longer part of the ring.\n\nSo the red inverter’s role is to provide the inverting path that allows the ring to oscillate during one phase of the clock and to participate in gating the ring oscillator on and off. It is **not** a leakage keeper and does not form a storage latch with `Inv1`.",
        "format": "markdown",
        "sha256": "d8fb228f26faf96055bb99cb575a78b019c7961908f274414c816bb2d2755833"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper/cross-coupled-latch interpretation and recognizes that the branch can form an odd-inversion loop during one clock phase. However, it misses the main role: a feedforward path that bypasses the CK switch and Inv1 to speed high-rate operation. It also omits that this unclocked path can overpower the intended behavior at low rates and raise the minimum usable clock frequency, and incorrectly treats the red inverter and Inv1 as receiving the same signal.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 973,
        "output_tokens": 16447,
        "total_tokens": 17420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15999,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 973,
        "output_tokens": 16447,
        "total_tokens": 17420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15999,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No.\n\nLook carefully at the connections:  \n\n- The input of the red inverter is the same node that drives **Inv₁** (the node to the right of the CK‑controlled switch).  \n- The output of the red inverter is shorted to the output of **Inv₁** (the node to the left of the \\(\\overline{\\text{CK}}\\)‑controlled switch).\n\nSo the red inverter is **in parallel with Inv₁**, not cross‑coupled to it.  \nThere is no feedback from the output node back to the floating node at the CK\nswitch. Consequently:\n\n- No latch is formed.\n- The node after CK is still a dynamic (floating) node when CK is low, so a minimum clock frequency due to leakage still exists. The red inverter does nothing to “staticize” that node.\n\nFunctionally, the red inverter just increases the effective drive strength / decreases the delay of the Inv₁ stage (equivalent to making Inv₁ bigger). It does **not** act as a keeper and does **not** remove the minimum‑frequency requirement.",
        "format": "markdown",
        "sha256": "3ceb47321a814960afbb4809e36e076584ede83e83c75097ba4ab10977001701"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and recognizes that the node is not staticized, but misreads the wiring and calls the red inverter parallel with Inv1. It is actually a feedforward branch that bypasses the CK switch and Inv1, helping at high speed but potentially corrupting operation at low clock rates and raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 973,
        "output_tokens": 19647,
        "total_tokens": 20620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19415,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 973,
        "output_tokens": 19647,
        "total_tokens": 20620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19415,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this LNA the input resistance is determined mainly by the\ntransconductance of the input transistor:\n\n\\[\nR_{\\text{in}}\\simeq \\frac{1}{g_{m1}}\n\\]\n\n(assuming large \\(r_o\\) and large output load impedance).  \nTo keep \\(R_{\\text{in}}=50~\\Omega\\),\n\n\\[\ng_{m1}=\\frac{1}{R_{\\text{in}}}=\\frac{1}{50}=20\\text{ mS}\n\\]\n\nso \\(g_{m1}\\) is fixed by the matching requirement.\n\nWith thermal–noise model for the MOSFET and for the feedback resistor,\nthe noise factor of the resistive‑feedback LNA can be written (again with\nthe above approximations) as\n\n\\[\nF \\approx 1 + \\frac{\\gamma}{g_{m1}R_S} + \\frac{R_S}{R_F}\n\\]\n\nwhere \\(R_S=50~\\Omega\\) and \\(\\gamma\\) is the channel‑noise coefficient of\n\\(M_1\\).\n\nUsing \\(g_{m1}R_S = 1\\) from the matching condition gives\n\n\\[\nF \\approx 1 + \\gamma + \\frac{R_S}{R_F}\n\\]\n\nThe first two terms (1 + γ) are set by the transistor and cannot be\nreduced without changing \\(R_{\\text{in}}\\).  \nThe only term that depends on circuit choice is \\(R_S/R_F\\), which is\nalways positive and decreases monotonically with increasing \\(R_F\\).\n\nTherefore, with the constraint \\(R_{\\text{in}} = 50~\\Omega\\):\n\n- \\(g_{m1}\\) must be set to \\(1/50\\) S;\n- To minimize NF, \\(R_F\\) should be made as large as possible (ideally,\n\\(R_F\\to\\infty\\), i.e. no feedback), since any finite \\(R_F\\) only adds\nthermal noise without improving the input match.\n\nIn practice you choose the largest \\(R_F\\) compatible with biasing,\nstability and bandwidth; from the noise point of view, more feedback\n(i.e. smaller \\(R_F\\)) always worsens NF when \\(R_{\\text{in}}\\) is fixed\nat 50 Ω.",
        "format": "markdown",
        "sha256": "d4d449cb14515e81b40b79fa74f11b99ae5aa76c9daacdbf112f5ebaa614584c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It assumes the match fixes gm at 1/Rs and concludes NF cannot improve below 1 + γ, missing the key finite-ro effect: gm can exceed 1/Rs while RF is adjusted to keep Rin at 50 Ω, allowing lower NF.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 18302,
        "total_tokens": 19242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 18302,
        "total_tokens": 19242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this shunt‑feedback LNA the real part of the input impedance and the noise factor can be written (1st‑order, neglecting ro and gate‑induced noise) as  \n\n\\[\nR_{\\text{in}}\\simeq \\frac{1}{g_{m1}+\\frac{1}{R_F}}\n\\]\n\n\\[\nF \\simeq 1+\\frac{\\gamma}{g_{m1}R_S}+\\frac{R_S}{R_F}\n\\]\n\nwhere \\(R_S=50\\ \\Omega\\) is the source resistance and \\(\\gamma\\) is the channel‑noise coefficient of \\(M_1\\).  \n\n---\n\n### Step 1 – Impose the 50‑Ω input match\n\nThe condition \\(R_{\\text{in}}=R_S=50\\ \\Omega\\) gives\n\n\\[\ng_{m1}+\\frac{1}{R_F}=\\frac{1}{50}\n\\qquad\\Rightarrow\\qquad \n\\frac{1}{R_F}=\\frac{1}{50}-g_{m1}\n\\]\n\n(so \\(g_{m1}<1/50=20\\ \\text{mS}\\) for a positive \\(R_F\\)).\n\nSubstitute this in the NF expression:\n\n\\[\nF \\simeq 1+\\frac{\\gamma}{g_{m1}R_S}+\nR_S\\!\\left(\\frac{1}{50}-g_{m1}\\right)\n      = 1+\\frac{\\gamma}{50\\,g_{m1}} + 1-50g_{m1}\n\\]\n\n\\[\nF(g_{m1}) = 2 + \\frac{\\gamma}{50\\,g_{m1}} - 50g_{m1}\n\\]\n\n---\n\n### Step 2 – Minimize \\(F\\) under the matching constraint\n\nDifferentiate with respect to \\(g_{m1}\\):\n\n\\[\n\\frac{dF}{dg_{m1}}\n= -\\frac{\\gamma}{50\\,g_{m1}^{2}}-50 < 0\n\\quad\\text{for all } g_{m1}>0\n\\]\n\nSo, for all allowed values of \\(g_{m1}\\) (i.e. \\(0<g_{m1}<1/50\\)) the derivative is negative:  \n**NF decreases monotonically as \\(g_{m1}\\) increases.**\n\nThe best NF is therefore obtained at the largest \\(g_{m1}\\) compatible with a\npositive \\(R_F\\), i.e.\n\n\\[\ng_{m1} \\rightarrow \\frac{1}{50}\\,,\n\\qquad\nR_F \\rightarrow \\infty\n\\]\n\nIn the limit \\(R_F\\to\\infty\\) the feedback path becomes negligible and the LNA behaves like a common‑gate input stage with\n\n\\[\nR_{\\text{in}} \\approx \\frac{1}{g_{m1}} = 50\\ \\Omega\n\\]\n\nand minimum noise factor\n\n\\[\nF_{\\min} \\approx 1+\\gamma\n\\]\n\n(about 2.2 dB for \\(\\gamma\\approx 2/3\\)).\n\n---\n\n### Design implication\n\nTo optimize NF while keeping \\(R_{\\text{in}}=50\\ \\Omega\\):\n\n* Make \\(M_1\\) as “strong” as possible (large W and/or high bias current) so that  \n  \\(g_{m1}\\) is as close as practical to \\(1/50\\ \\text{S}\\).\n* Choose \\(R_F\\) as large as possible (so that its contribution \\(R_S/R_F\\) to NF is small) while still meeting other requirements such as gain flatness and stability.\n\nIn other words, realize the 50‑Ω input resistance mainly with \\(1/g_{m1}\\) and use only weak resistive feedback; that combination gives the lowest achievable NF for this topology under the 50‑Ω matching constraint.",
        "format": "markdown",
        "sha256": "bfd2f3b457791e74453e0db371a2e84d120fe2f5ae652efc61210ee27beac02e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the shunt-feedback LNA and discusses matching, but its simplified input-resistance model excludes finite output resistance and leads to the rejected conclusion that the best NF is 1 + γ at gm = 1/Rs. The key optimization is to use finite ro to raise gm above 1/Rs and increase RF to maintain the 50-Ω match.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 24301,
        "total_tokens": 25241,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23461,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 24301,
        "total_tokens": 25241,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23461,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this feedback LNA the input resistance is not set only by \\(g_{m1}\\); it also depends on\n\\(g_{m2}\\) and on the feedback resistor \\(R_F\\).\n\n---\n\n### 1. Input resistance constraint\n\nWith \\(M_2\\) in common–gate and neglecting \\(r_o\\)’s, the small–signal analysis gives\n\n\\[\nR_{\\text{in}}=\\frac{1+g_{m2}R_F}{g_{m1}+g_{m2}}\n\\]\n\nTo keep the input matched to 50 Ω we must always satisfy  \n\n\\[\nR_{\\text{in}} = 50\\; \\Omega\n\\]\n\nso that\n\n\\[\nR_F = \\frac{50\\,(g_{m1}+g_{m2})-1}{g_{m2}}\n\\tag{1}\n\\]\n\n(assuming \\(50(g_{m1}+g_{m2})\\gg1\\)).\n\n---\n\n### 2. Noise figure\n\nThe NF is mainly set by the first transistor and the feedback resistor:\n\n\\[\nF \\approx 1\n+ \\frac{\\gamma_1}{g_{m1}R_S}\n+ \\frac{R_S}{R_F}\n+ \\text{(smaller terms from }M_2\\text{)}\n\\]\n\nwith \\(R_S = 50\\:\\Omega\\) and \\(\\gamma_1\\approx 2/3\\)–2.\n\n- The first term, \\(\\gamma_1/(g_{m1}R_S)\\), **decreases** when \\(g_{m1}\\) is increased.\n- The second term, \\(R_S/R_F\\), **decreases** when \\(R_F\\) is increased.\n\nUsing (1), increasing \\(g_{m1}\\) (and keeping \\(g_{m2}\\) fixed or small) forces \\(R_F\\) to increase in order to maintain \\(R_{\\text{in}}=50\\:\\Omega\\). Thus both dominant noise terms decrease with increasing \\(g_{m1}\\).\n\nMathematically, with the constraint (1) the NF is a monotonically decreasing function of\n\\(g_{m1}\\); there is no internal optimum – the minimum NF is obtained for the **largest\n\\(g_{m1}\\)** you can afford (power, linearity, headroom).\n\n---\n\n### 3. Practical design rule\n\n1. Choose the largest feasible \\(g_{m1}\\) (by setting \\(I_D\\) and device size of \\(M_1\\)) based on power and linearity.\n2. Use as small a \\(g_{m2}\\) as allowed (its noise only degrades NF).\n3. Compute \\(R_F\\) from  \n\n   \\[\n   R_F = \\frac{50\\,(g_{m1}+g_{m2})-1}{g_{m2}}\n   \\]\n\n   so that \\(R_{\\text{in}} = 50\\:\\Omega\\).\n\nThis procedure optimizes the circuit for minimum NF while preserving the 50‑Ω input match.",
        "format": "markdown",
        "sha256": "d4fedcb966935e9858b99f894ac166a9694ec5bc6e598161551a4ecdf5407054"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the right high-level advice to increase gm and adjust RF to preserve the match, reducing NF. But it misidentifies M2 as common-gate, neglects ro, and uses an incorrect input-resistance relation, missing the finite-ro mechanism central to the answer.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 9798,
        "total_tokens": 10738,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9145,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 940,
        "output_tokens": 9798,
        "total_tokens": 10738,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9145,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Look at node \\(P\\).  \nBecause the MOS gates draw negligible dc/small‑signal current, the only element connected from node \\(P\\) to the rest of the circuit (ignoring \\(C_{in}\\)) is the feedback resistor \\(R_F\\).\n\nLet a test current \\(i_{in}\\) be injected into \\(P\\), and denote the small‑signal voltage at \\(P\\) by \\(v_P\\) and the output voltage by \\(v_{out}\\).\n\nFor the amplifier (transistors \\(M_1\\)–\\(M_3\\), \\(R_{D1}\\), \\(R_{D2}\\), \\(I_{SS}\\)) with the feedback path opened, define the open‑loop gain\n\n\\[\nA \\equiv \\frac{v_{out}}{v_P}\n\\]\n\n(negative for an inverting stage; we will use its magnitude).\n\nWith the feedback resistor \\(R_F\\) connected, KCL at node \\(P\\) gives\n\n\\[\ni_{in} = \\frac{v_P - v_{out}}{R_F}\n      = \\frac{v_P - A v_P}{R_F}\n      = \\frac{(1 + A)\\,v_P}{R_F}.\n\\]\n\nHence the small‑signal input impedance seen at node \\(P\\) is\n\n\\[\nR_{in} \\equiv \\frac{v_P}{i_{in}}\n          = \\frac{R_F}{1 + A}.\n\\]\n\nSo the feedback reduces the input impedance by the factor \\(1 + A\\); for large open‑loop gain \\(|A| \\gg 1\\),\n\n\\[\nR_{in} \\approx \\frac{R_F}{|A|} \\ll R_F.\n\\]\n\n(If the capacitor \\(C_{in}\\) is included, the total input impedance is\n\\(Z_{in} = \\left(R_F/(1+A)\\right) \\parallel \\frac{1}{j\\omega C_{in}}\\).)",
        "format": "markdown",
        "sha256": "d0b402f2c8b0a2b81afc63205523db30c48fe35ac85f87ef1ab8f36571881af4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the feedback-driven reduction in input impedance, but its formula omits the amplifier’s output resistance. The exact result is \\(R_{in}=(R_F+R_{D2})/(1+A_0)\\), with \\(A_0\\) the unloaded gain.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 23430,
        "total_tokens": 23657,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23005,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 23430,
        "total_tokens": 23657,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23005,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking into node \\(P\\), the small‑signal input resistance of the regulated‑cascode stage is the source resistance of \\(M_1\\) reduced by the local feedback formed by \\(M_2\\) and \\(R_{D1}\\).\n\nWithout the regulating amplifier, the small‑signal resistance seen at the source of \\(M_1\\) is\n\n\\[\nR_{in0} \\approx \\frac{1}{g_{m1}}\n\\]\n\nWith the local loop, a change at node \\(P\\) causes a change at node \\(X\\), which is amplified by the common‑source stage \\(M_2\\) with gain\n\n\\[\nA \\approx -g_{m2}R_{D1}\n\\]\n\nThis gain feeds back to the gate of \\(M_1\\), so the effective input resistance is reduced by the factor \\((1+|A|)\\):\n\n\\[\nR_{in} \\approx \\frac{1/g_{m1}}{1 + g_{m2} R_{D1}}\n\\]\n\nFor \\(g_{m2}R_{D1} \\gg 1\\),\n\n\\[\nR_{in} \\approx \\frac{1}{g_{m1}g_{m2}R_{D1}}\n\\]\n\nThe total small‑signal input impedance seen by the test current source is this resistance in parallel with the photodiode capacitance:\n\n\\[\nZ_{in}(s) \\approx \\left[ \\frac{1}{g_{m1}(1+g_{m2}R_{D1})} \\right] \\parallel \\frac{1}{sC_{in}}\n\\]\n\n(usually \\(C_{in}\\) dominates at high frequency).",
        "format": "markdown",
        "sha256": "ced36142750919c6ae951bae2a88a555ee4255def0a4a99944f68ed80f8485fe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer uses a regulated-cascode model and omits the feedback resistor and two-stage amplifier that determine the input impedance. It therefore misses the required result, Rin = (RF + RD2)/(1 + A0).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 17979,
        "total_tokens": 18206,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17614,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 17979,
        "total_tokens": 18206,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17614,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let the small–signal voltage at node \\(P\\) be \\(v_P\\) and the current injected by the source be \\(i_{in}\\).  \nThe MOS gates draw negligible ac current, so the only currents leaving node \\(P\\) are through \\(C_{in}\\) and \\(R_F\\).\n\nWith the amplifier gain (from \\(P\\) to \\(V_{out}\\)) equal to\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_P},\n\\]\n\nKCL at node \\(P\\) gives (phasor domain):\n\n\\[\ni_{in}=j\\omega C_{in} v_P+\\frac{v_P-v_{out}}{R_F}\n   =j\\omega C_{in} v_P+\\frac{v_P-A_v v_P}{R_F}.\n\\]\n\nHence\n\n\\[\ni_{in}=v_P\\!\\left(j\\omega C_{in}+\\frac{1-A_v}{R_F}\\right)\n\\]\n\nand the input impedance is\n\n\\[\n\\boxed{\nZ_{in}(\\omega)=\\frac{v_P}{i_{in}}\n=\\frac{1}{\\,j\\omega C_{in}+\\dfrac{1-A_v}{R_F}\\,}\n}\n\\]\n\nAt low frequencies (\\(\\omega\\to 0\\)),\n\n\\[\nR_{in} \\approx \\frac{R_F}{1-A_v}.\n\\]\n\nFor a large negative gain \\(A_v\\) (so \\(|A_v|\\gg 1\\)), this reduces to\n\n\\[\nR_{in} \\approx \\frac{R_F}{1+|A_v|}\\ll R_F .\n\\]",
        "format": "markdown",
        "sha256": "cb793dfc4313b1a3921a02edb0ae0a3ad1f881d33dade525ce4fab4a6a202fd7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the Miller-feedback mechanism and predicts a reduced input resistance, but omits the amplifier output resistance. The required exact result is \u001b[?]",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 12899,
        "total_tokens": 13126,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12543,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 227,
        "output_tokens": 12899,
        "total_tokens": 13126,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12543,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Model the LDO output noise as a small‑signal voltage \\(v_n(t)\\) added to the supply node.  \nThis noise changes the oscillation frequency (supply pushing):\n\n\\[\nf_0(V_{\\text{out}}) = f_0 + K_{\\text{push}}\\,v_n(t),\\qquad  \nK_{\\text{push}} \\equiv \\frac{\\partial f_0}{\\partial V_{\\text{out}}}\\;[\\text{Hz/V}]\n\\]\n\nHence the instantaneous frequency deviation is\n\n\\[\n\\Delta f(t)=K_{\\text{push}} v_n(t)\n\\]\n\nIf the LDO has an output‑noise PSD \\(S_{\\text{th}}(f)\\) [V\\(^2\\)/Hz], then the\nfrequency‑noise PSD is\n\n\\[\nS_{\\Delta f}(f) = K_{\\text{push}}^{2} S_{\\text{th}}(f)\n\\]\n\nPhase is the time integral of frequency, so in the frequency domain\n\n\\[\nS_{\\phi}(f) = \\frac{S_{\\Delta f}(f)}{f^{2}}\n           = \\frac{K_{\\text{push}}^{2}}{f^{2}}\\, S_{\\text{th}}(f)\n           \\qquad [\\text{rad}^2/\\text{Hz}]\n\\]\n\nThe single‑sideband phase noise of the VCO due to the LDO noise is then\n\n\\[\nL(f) \\approx \\frac{1}{2} S_{\\phi}(f)\n          = \\frac{K_{\\text{push}}^{2}}{2 f^{2}}\\, S_{\\text{th}}(f)\n          \\qquad [\\text{linear}]\n\\]\n\nor in dBc/Hz,\n\n\\[\nL(f)\\,[\\text{dBc/Hz}] = 10\\log_{10}\n\\!\\left(\\frac{K_{\\text{push}}^{2}}{2 f^{2}}\\, S_{\\text{th}}(f)\\right)\n\\]\n\nSo: obtain the supply‑pushing coefficient \\(K_{\\text{push}}\\) (e.g., by sweeping\n\\(V_{\\text{out}}\\) in simulation) and use the above relation with the LDO noise\nspectrum \\(S_{\\text{th}}\\) to compute the VCO output phase noise.",
        "format": "markdown",
        "sha256": "9116e7d8d6a446e8ec53c5ae2122ae3bad063b8909b2167462132776300ed8a6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly derives supply-pushing frequency noise and its 1/f² conversion to phase noise. It omits the circuit-specific insight that the supply perturbation acts directly on the varactors, making Kpush closely related to KVCO.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 943,
        "output_tokens": 6950,
        "total_tokens": 7893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6448,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 943,
        "output_tokens": 6950,
        "total_tokens": 7893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6448,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Model the LDO as adding a small noisy voltage \\(v_n(t)\\) on the VCO supply, with\nPSD  \n\n\\[\nS_{v_{dd}}(f) = S_{th}\\;\\;[\\text{V}^2/\\text{Hz}]\n\\]\n\nLet the VCO have a *supply‑pushing* sensitivity\n\n\\[\nK_{VDD}=\\frac{\\partial f_0}{\\partial V_{DD}} \\quad [\\text{Hz/V}]\n\\]\n\n(you obtain this from simulation or measurement).\n\n---\n\n### From supply noise to phase noise\n\nInstantaneous oscillation frequency:\n\n\\[\nf_{\\text{inst}}(t)=f_0 + K_{VDD} v_n(t)\n\\]\n\nHence the phase fluctuation is\n\n\\[\n\\phi_n(t)=2\\pi \\int K_{VDD} v_n(t)\\,dt\n\\]\n\nIn the frequency domain, integration gives a factor \\(1/jf\\), so the phase‑noise\nPSD is\n\n\\[\nS_{\\phi}(f) = \\left|\\frac{K_{VDD}}{f}\\right|^2 S_{v_{dd}}(f)\n           = \\frac{K_{VDD}^2}{f^2} S_{th}(f) \\quad [\\text{rad}^2/\\text{Hz}]\n\\]\n\nThe single‑sideband output phase noise (normalized to carrier power) is\n\n\\[\nL(f) = \\frac{1}{2} S_{\\phi}(f)\n     = \\frac{K_{VDD}^2\\,S_{th}(f)}{2\\,f^2} \\quad [\\text{linear}]\n\\]\n\nor, in dBc/Hz,\n\n\\[\nL(f)\\,[\\text{dBc/Hz}] = 10\\log_{10}\\!\\left(\\frac{K_{VDD}^2\\,S_{th}(f)}{2\\,f^2}\\right).\n\\]\n\nIf the LDO thermal noise is white (\\(S_{th}\\) constant), this contribution to VCO\nphase noise has a \\(1/f^2\\) slope.",
        "format": "markdown",
        "sha256": "ee133f440ca38b347fcb74ee8bfa15d5a6d8b65a6420bb19f1474ca436187ab6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing and derives the frequency-noise-to-phase-noise conversion, including the 1/offset-frequency-squared dependence. It omits the circuit-specific design insight that supply noise acts directly on the varactors, making Kpush closely related to KVCO and lower KVCO beneficial.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 943,
        "output_tokens": 5031,
        "total_tokens": 5974,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4571,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 943,
        "output_tokens": 5031,
        "total_tokens": 5974,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4571,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Model the LDO output noise as a small random voltage \\(v_n(t)\\) added to the VCO supply\n\n\\[\nV_{\\text{out}}(t)= V_{\\text{DD}} + v_n(t), \\qquad S_{v_n}(f)=S_{\\text{th}}\\;[{\\rm V^2/Hz}]\n\\]\n\nBecause the oscillation frequency depends on supply voltage, a fluctuation of the\nsupply produces a fluctuation of frequency (“pushing”)\n\n\\[\nf_0(V_{\\text{out}}) \\approx f_0 + K_{V\\!DD}\\,v_n(t), \\qquad\nK_{V\\!DD} \\equiv \\frac{\\partial f_0}{\\partial V_{\\text{out}}}\\; [{\\rm Hz/V}]\n\\]\n\nHence the frequency‑noise PSD is\n\n\\[\nS_{\\Delta f}(f) = K_{V\\!DD}^2\\, S_{\\text{th}} \\;[{\\rm Hz^2/Hz}]\n\\]\n\nPhase is the integral of frequency, so in the frequency domain\n\n\\[\nS_\\phi(f)=\\frac{S_{\\Delta f}(f)}{f^2}\n          =\\frac{K_{V\\!DD}^2\\, S_{\\text{th}}}{f^2} \\;[{\\rm rad^2/Hz}]\n\\]\n\nThe single‑sideband phase‑noise spectrum of the VCO output is\n\n\\[\n\\boxed{L(f) = \\frac{1}{2} S_\\phi(f)\n            = \\frac{K_{V\\!DD}^2\\, S_{\\text{th}}}{2 f^2}}\n\\]\n\n(where \\(f\\) is the offset from the carrier).  \nIn dBc/Hz:\n\n\\[\nL_{\\text{dBc/Hz}}(f)=10\\log_{10}\n\\!\\left(\\frac{K_{V\\!DD}^2\\, S_{\\text{th}}}{2 f^2}\\right)\n\\]\n\nIf there is any additional filtering between the LDO and the VCO (decoupling, etc.), multiply \\(S_{\\text{th}}\\) by the squared magnitude of that transfer function before using the formula.",
        "format": "markdown",
        "sha256": "0eeeabeff3b81d234b099b65a54af3c7bc03fa3596339b1823704204f2717e0f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly derives supply-pushing frequency noise and the 1/f² phase-noise conversion, with the appropriate SSB factor. It omits the circuit-specific insight that supply noise acts directly on the varactors, making Kpush closely related to KVCO and lower KVCO beneficial.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 943,
        "output_tokens": 6042,
        "total_tokens": 6985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5562,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 943,
        "output_tokens": 6042,
        "total_tokens": 6985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5562,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) at the tail makes the tail node an AC‑ground (for the oscillation frequency and its even harmonics).  \n\n- The noise of the tail‑current source now sees a low impedance to ground and is largely shunted through \\(C_T\\), so it produces much smaller voltage variations at the tail node.  \n- Consequently, this noise is far less up‑converted and coupled into the LC tank, so the phase noise contribution of the tail device drops substantially.  \n- Since an ideal capacitor is noiseless and the tank itself is almost unchanged, the overall phase noise improves (is reduced), often by several dB, until it becomes dominated by the tank and cross‑coupled pair.",
        "format": "markdown",
        "sha256": "a197487eddda838d20901c35e14af0fdd500708f2758edb82457300a06fd3b44"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It claims a monotonic phase-noise improvement from shunting tail noise, missing the nonmonotonic behavior and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 656,
        "output_tokens": 6501,
        "total_tokens": 7157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6349,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 656,
        "output_tokens": 6501,
        "total_tokens": 7157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6349,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) lowers the AC impedance of the tail node around the oscillation frequency (and its nearby offsets).  \n\nAs a result:\n\n- Noise current from the tail‑current source and the even‑harmonic components of the switching pair are shunted into \\(C_T\\) and to ground, instead of appearing as voltage variations at node \\(P\\).  \n- The common‑source node therefore moves much less, so \\(V_{GS}\\) and \\(g_m\\) of \\(M_1/M_2\\) are less modulated.  \n- This reduces AM‑to‑PM conversion and the up‑conversion of the tail source’s flicker and thermal noise into phase fluctuations of the tank.\n\nSince an ideal capacitor is noiseless, no new noise source is introduced.\n\nSo, adding a sufficiently large \\(C_T\\) **reduces (improves) the oscillator’s phase noise**, especially close to the carrier, mainly by suppressing the contribution of the tail current source.",
        "format": "markdown",
        "sha256": "ad6ce50f1156a00d6df2eec167c1644ff2cf06655c6707ecaac786fc69c964ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims a monotonic phase-noise improvement from filtering the tail node, missing the nonmonotonic effect and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 656,
        "output_tokens": 5132,
        "total_tokens": 5788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 656,
        "output_tokens": 5132,
        "total_tokens": 5788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) lowers the phase noise, mainly by suppressing the contribution of the tail‑current source.\n\n- At the oscillation frequency the capacitor provides a low‑impedance path to ground, so most of the tail‑source noise current flows into \\(C_T\\) instead of through the cross‑coupled pair.\n- This keeps the common‑source (tail) node nearly ac‑grounded, reducing the time‑varying modulation of the differential pair’s transconductance and therefore the up‑conversion of the tail device’s (especially flicker) noise to near‑carrier phase noise.\n\nThus, with a sufficiently large \\(C_T\\), the phase noise improves (particularly close‑in), and the remaining noise is dominated by the tank and the cross‑coupled transistors.",
        "format": "markdown",
        "sha256": "c2c094f6567ea2204d6874deef9319fdff74f3125505f5bae76a269cf18930dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives a monotonic phase-noise improvement from tail-node filtering, missing the nonmonotonic behavior and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 656,
        "output_tokens": 5735,
        "total_tokens": 6391,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5566,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 656,
        "output_tokens": 5735,
        "total_tokens": 6391,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5566,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two identical LC-tank VCO cores that are cross‑coupled to obtain quadrature outputs.  \nTo first order, the coupling transistors contribute mainly negative resistance (for start‑up and phase relationship) and little reactance, so they do not change the resonance of each tank appreciably.\n\nThus the oscillation frequency is essentially the resonance of one LC tank:\n\n\\[\n\\omega_0 \\approx \\frac{1}{\\sqrt{LC}},\\qquad\nf_\\text{osc} \\approx \\frac{1}{2\\pi\\sqrt{LC}},\n\\]\n\nwhere \\(L\\) is the inductance of each coil and \\(C\\) is the total capacitance at each tank node (varactor + device and wiring capacitances).",
        "format": "markdown",
        "sha256": "b72b8a4889814a1aea6408cf125429fdf3bc3bfb0df2ecd8765d175160afe765"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives the correct uncoupled LC tank resonance, but wrongly dismisses the coupling-induced frequency shift and omits the required shift term, αω₀/(2Q) or an equivalent expression.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 5511,
        "total_tokens": 6439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5346,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 5511,
        "total_tokens": 6439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5346,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two cores form LC‑tank oscillators; the transistors only supply negative resistance and coupling for quadrature and do not determine the resonance.  \nIf each tank has inductance \\(L\\) (each side) and total capacitance \\(C\\) from each node to ground, the differential oscillation frequency is approximately\n\n\\[\nf_{\\text{osc}} \\simeq \\frac{1}{2\\pi\\sqrt{LC}} .\n\\]\n\n(Numeric value requires the actual \\(L\\) and \\(C\\) used in the tanks.)",
        "format": "markdown",
        "sha256": "a7b75c6f400ddc6007484d48f478dd7bd9d6370c946f08dbd4ca6bd57bcaa634"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The LC tank resonance is correctly identified, but the answer omits the coupling-induced frequency shift, a central part of the estimate, and implies the coupling does not affect resonance.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 6901,
        "total_tokens": 7829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6781,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 6901,
        "total_tokens": 7829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6781,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "openai/gpt-5.1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Each core is simply an LC-tank oscillator; the super‑harmonic coupling transistors only inject current and do not appreciably change the tank resonance.  \nFor one core, the resonant radian frequency is\n\n\\[\n\\omega_0 \\approx \\frac{1}{\\sqrt{L\\,C_\\text{tot}}},\n\\]\n\nwhere \\(L\\) is the inductance of each coil and \\(C_\\text{tot}\\) is the total capacitance at each node (varactor + device parasitics).  \nThus the oscillation frequency of the whole quadrature structure is\n\n\\[\nf_\\text{osc} \\approx \\frac{1}{2\\pi\\sqrt{L\\,C_\\text{tot}}}.\n\\]",
        "format": "markdown",
        "sha256": "d164bead1e52d8da18f6ba583966537b601225829867a1864bd19050648d8957"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives the uncoupled tank resonance correctly, but incorrectly dismisses the coupling-induced frequency shift, which is central to the estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 7667,
        "total_tokens": 8595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7507,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 928,
        "output_tokens": 7667,
        "total_tokens": 8595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7507,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    }
  ]
}
