{
  "model_key": "gpt_53",
  "display_name": "GPT-5.3",
  "provider": "openai",
  "evaluation_model_ids": [],
  "thinking_effort": "xhigh",
  "configuration_note": "GPT-5.3 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (openai/gpt-5.3-codex) at reasoning effort xhigh, the highest it offers. Requests set max_tokens to 128,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for GPT-5.3 on 2026-11-10 ($1.75 input, $0.175 cached input, $14.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 101,
          "incorrect_count": 49,
          "partial_credit_count": 43,
          "zero_count": 6,
          "mean_score_0_to_4": 3.2933333333333334,
          "score_percent": 82.33333333333334,
          "score_distribution": {
            "0": 6,
            "1": 13,
            "2": 13,
            "3": 17,
            "4": 101
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 101,
          "incorrect_count": 49,
          "partial_credit_count": 43,
          "zero_count": 6,
          "mean_score_0_to_4": 3.2933333333333334,
          "score_percent": 82.33333333333334,
          "score_distribution": {
            "0": 6,
            "1": 13,
            "2": 13,
            "3": 17,
            "4": 101
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 73,
          "incorrect_count": 17,
          "partial_credit_count": 11,
          "zero_count": 6,
          "mean_score_0_to_4": 3.5444444444444443,
          "score_percent": 88.61111111111111,
          "score_distribution": {
            "0": 6,
            "1": 3,
            "3": 8,
            "4": 73
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 73,
          "incorrect_count": 17,
          "partial_credit_count": 11,
          "zero_count": 6,
          "mean_score_0_to_4": 3.5444444444444443,
          "score_percent": 88.61111111111111,
          "score_distribution": {
            "0": 6,
            "1": 3,
            "3": 8,
            "4": 73
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 28,
          "incorrect_count": 32,
          "partial_credit_count": 32,
          "zero_count": 0,
          "mean_score_0_to_4": 2.9166666666666665,
          "score_percent": 72.91666666666666,
          "score_distribution": {
            "1": 10,
            "2": 13,
            "3": 9,
            "4": 28
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 28,
          "incorrect_count": 32,
          "partial_credit_count": 32,
          "zero_count": 0,
          "mean_score_0_to_4": 2.9166666666666665,
          "score_percent": 72.91666666666666,
          "score_distribution": {
            "1": 10,
            "2": 13,
            "3": 9,
            "4": 28
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 33,
        "incorrect_count": 17,
        "partial_credit_count": 15,
        "zero_count": 2,
        "mean_score_0_to_4": 3.26,
        "score_percent": 81.5,
        "score_distribution": {
          "0": 2,
          "1": 4,
          "2": 6,
          "3": 5,
          "4": 33
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 35,
        "incorrect_count": 15,
        "partial_credit_count": 13,
        "zero_count": 2,
        "mean_score_0_to_4": 3.32,
        "score_percent": 83.0,
        "score_distribution": {
          "0": 2,
          "1": 4,
          "2": 5,
          "3": 4,
          "4": 35
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 33,
        "incorrect_count": 17,
        "partial_credit_count": 15,
        "zero_count": 2,
        "mean_score_0_to_4": 3.3,
        "score_percent": 82.5,
        "score_distribution": {
          "0": 2,
          "1": 5,
          "2": 2,
          "3": 8,
          "4": 33
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 89088,
        "input_tokens": 255282,
        "output_tokens": 1354415,
        "total_tokens": 1609697
      },
      "known_totals": {
        "cached_input_tokens": 89088,
        "input_tokens": 255282,
        "output_tokens": 1354415,
        "total_tokens": 1609697
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 25,
          "incorrect_count": 5,
          "partial_credit_count": 3,
          "zero_count": 2,
          "mean_score_0_to_4": 3.566666666666667,
          "score_percent": 89.16666666666667,
          "score_distribution": {
            "0": 2,
            "1": 1,
            "3": 2,
            "4": 25
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 25,
          "incorrect_count": 5,
          "partial_credit_count": 3,
          "zero_count": 2,
          "mean_score_0_to_4": 3.566666666666667,
          "score_percent": 89.16666666666667,
          "score_distribution": {
            "0": 2,
            "1": 1,
            "3": 2,
            "4": 25
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 23,
          "incorrect_count": 7,
          "partial_credit_count": 5,
          "zero_count": 2,
          "mean_score_0_to_4": 3.5,
          "score_percent": 87.5,
          "score_distribution": {
            "0": 2,
            "1": 1,
            "3": 4,
            "4": 23
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 8,
          "incorrect_count": 12,
          "partial_credit_count": 12,
          "zero_count": 0,
          "mean_score_0_to_4": 2.8,
          "score_percent": 70.0,
          "score_distribution": {
            "1": 3,
            "2": 6,
            "3": 3,
            "4": 8
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 10,
          "incorrect_count": 10,
          "partial_credit_count": 10,
          "zero_count": 0,
          "mean_score_0_to_4": 2.95,
          "score_percent": 73.75,
          "score_distribution": {
            "1": 3,
            "2": 5,
            "3": 2,
            "4": 10
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 10,
          "incorrect_count": 10,
          "partial_credit_count": 10,
          "zero_count": 0,
          "mean_score_0_to_4": 3.0,
          "score_percent": 75.0,
          "score_distribution": {
            "1": 4,
            "2": 2,
            "3": 4,
            "4": 10
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming **same bias condition** (same \\(V_{OV}\\) or same \\(I_D\\) regime) and a long-channel model:\n\n\\[\nA_{v,\\text{int}} = g_m r_o\n\\]\n\n- Doubling \\(W\\) and \\(L\\) keeps \\(W/L\\) the same, so \\(g_m\\) is about unchanged.\n- \\(r_o\\) improves with channel length (\\(\\lambda \\propto 1/L\\)), so doubling \\(L\\) makes \\(r_o\\) roughly \\(2\\times\\).\n\nSo the **intrinsic gain roughly doubles**.  \n(Width increase by itself doesn’t help intrinsic gain much; length is the key lever.)",
        "format": "markdown",
        "sha256": "d630917e2b599d1eeb36f3e1b1e33eff6256dc568ea3d4982fe156709dfa0430"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions preserves W/L and approximately gm, while the increased channel length roughly doubles ro and hence intrinsic gain, under the stated bias assumptions.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2107,
        "total_tokens": 2133,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2107,
        "total_tokens": 2133,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For a **MOSFET in saturation**, intrinsic gain is\n\n\\[\nA_{int} \\approx g_m r_o = \\frac{g_m}{g_{ds}}.\n\\]\n\nIf you **double both \\(W\\) and \\(L\\)**:\n\n- \\(W/L\\) stays the same \\(\\Rightarrow\\) \\(g_m\\) is about unchanged (for same bias condition).\n- Longer \\(L\\) reduces channel-length modulation (\\(\\lambda \\propto 1/L\\)) \\(\\Rightarrow\\) \\(r_o\\) increases roughly in proportion to \\(L\\).\n\nSo the intrinsic gain **increases**, typically by about **2×** (first-order long-channel view).  \n(Real short-channel devices may show less-than-ideal improvement.)",
        "format": "markdown",
        "sha256": "860fb618b247d57cf1e932881633a85c74acdc048c210a91cd51da3b231b6fcb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling both dimensions leaves W/L and approximately gm unchanged, while the longer channel roughly doubles ro and intrinsic gain. The first-order caveat is appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1344,
        "total_tokens": 1370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1344,
        "total_tokens": 1370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Using the usual long-channel MOSFET model, the **intrinsic gain** is\n\n\\[\nA_{int} = g_m r_o = \\frac{g_m}{g_{ds}}.\n\\]\n\nIf you double both \\(W\\) and \\(L\\):\n\n- \\(W/L\\) stays the same \\(\\Rightarrow g_m\\) is about unchanged (for same bias condition).\n- Longer \\(L\\) reduces channel-length modulation (\\(\\lambda \\propto 1/L\\)) \\(\\Rightarrow r_o\\) roughly doubles.\n\nSo the intrinsic gain **approximately doubles**.\n\n(Real short-channel devices may deviate from this ideal.)",
        "format": "markdown",
        "sha256": "7ef5de145d65fe307c58ec3870c5568777700b7d0aa04e0133103bd26bda2e86"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling both dimensions leaves gm approximately unchanged, reduces channel-length modulation, roughly doubles ro, and therefore approximately doubles intrinsic gain.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1605,
        "total_tokens": 1631,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1605,
        "total_tokens": 1631,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For a **given MOSFET** in saturation (long-channel model), transconductance is\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}=\\mu_n C_{ox}\\frac{W}{L}V_{OV}\n\\]\n\nso \\(g_m\\) is proportional to \\(V_{OV}\\).  \nSo in that usual sense, **Student A is correct**.\n\nWhy the confusion? Because you also see:\n\n\\[\ng_m=\\frac{2I_D}{V_{OV}}\n\\]\n\nIf you hold \\(I_D\\) fixed, this expression says \\(g_m\\) decreases as \\(V_{OV}\\) increases (or \\(g_m/I_D=2/V_{OV}\\) decreases). That’s the context where **Student B** can seem right.\n\nSo: **default interpretation → A; fixed-current/gm/Id context → B.**",
        "format": "markdown",
        "sha256": "5a49d9ede2503475a83a31abcb0dc3d97a1fb19a63539f92cf91f217bdfbd2f3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that for a fixed MOSFET size, gm increases with VOV, and explains that gm decreases only when ID is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1447,
        "total_tokens": 1485,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1255,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1447,
        "total_tokens": 1485,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1255,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be right — it depends on what is held constant.\n\nFor a long-channel MOSFET in saturation:\n\n\\[\nI_D=\\frac{1}{2}\\mu C_{ox}\\frac{W}{L}V_{OV}^2,\\qquad\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}=\\mu C_{ox}\\frac{W}{L}V_{OV}\n\\]\n\nSo if you increase \\(V_{OV}\\) by increasing \\(V_{GS}\\) (same device), \\(g_m\\) **increases** → **Student A**.\n\nBut also:\n\n\\[\ng_m=\\frac{2I_D}{V_{OV}}\n\\]\n\nSo at **fixed \\(I_D\\)**, increasing \\(V_{OV}\\) makes \\(g_m\\) **decrease** → **Student B**.\n\nA common source of confusion is \\(g_m/I_D = 2/V_{OV}\\), which always decreases with \\(V_{OV}\\).",
        "format": "markdown",
        "sha256": "91ae72faa19621c57579f90bdaf3b94af0b8a2045876f64cadb308bbc13c71a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that for a fixed device, increasing overdrive increases gm, while at fixed drain current gm decreases; this matches the essential distinction in the golden solution.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1079,
        "total_tokens": 1117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 866,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1079,
        "total_tokens": 1117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 866,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both can be correct — it depends on what is being held constant.**\n\nFor a long-channel MOSFET in saturation:\n\n\\[\nI_D=\\frac{1}{2}\\beta V_{OV}^2,\\quad g_m=\\frac{\\partial I_D}{\\partial V_{GS}}=\\beta V_{OV}=\\frac{2I_D}{V_{OV}}\n\\]\n\n- If you keep the **same transistor** (\\(\\beta\\) fixed) and increase \\(V_{OV}\\) by raising \\(V_{GS}\\), then \\(g_m\\) **increases**.  \n  → **Student A is correct** in this sense.\n\n- If you keep **\\(I_D\\) fixed** and compare different \\(V_{OV}\\), then \\(g_m=\\frac{2I_D}{V_{OV}}\\), so higher \\(V_{OV}\\) gives **lower** \\(g_m\\).  \n  → **Student B is correct** in this sense.\n\nSo the statements are not contradictory; they refer to different conditions.",
        "format": "markdown",
        "sha256": "a4e9305f09f54af2fb5e1d5df8a2340371e860d422bad5ef7e773216da293d22"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed transistor and explains that Student B is right only when drain current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1400,
        "total_tokens": 1438,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1400,
        "total_tokens": 1438,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not **literally** identical, but very close.\n\n- The **structure** of the small-signal model is the same ( \\(g_m\\), \\(r_o\\), optional \\(g_{mb}\\), capacitances).\n- For a PMOS, the **polarity/directions** are reversed compared to NMOS:\n  - use \\(v_{sg}\\) instead of \\(v_{gs}\\),\n  - use \\(v_{sd}\\) instead of \\(v_{ds}\\),\n  - controlled current source points opposite direction.\n\nSo: same model form, opposite sign conventions. You can think of PMOS as a “flipped” NMOS small-signal model.",
        "format": "markdown",
        "sha256": "67abd65f4fbef7b6d318d0793f648717d1b2839f9a6382f86c2833b4a79a9b77"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model, with reversed polarity and sign conventions.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2035,
        "total_tokens": 2061,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1891,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2035,
        "total_tokens": 2061,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1891,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: **not literally identical, but very similar (complementary).**\n\nThe **structure** of the small-signal model is the same (same \\(g_m\\), \\(r_o\\), capacitances, etc.), but for PMOS you must flip polarities:\n\n- use \\(v_{sg}\\) instead of \\(v_{gs}\\) (or treat \\(g_m\\) as negative if you keep \\(v_{gs}\\)),\n- current source direction is reversed relative to NMOS,\n- body-effect term uses opposite voltage polarity as well.\n\nSo: **same model form, opposite sign/direction conventions.**",
        "format": "markdown",
        "sha256": "9bdb4eb2232ef2825dc73b7412f0619f2769c3628587578cdfc57a38388cfa81"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model, with reversed polarity and sign conventions, which earns full credit.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 983,
        "total_tokens": 1009,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 849,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 983,
        "total_tokens": 1009,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 849,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not **strictly identical**, but **analogous**.\n\n- The small-signal equivalent circuit form is the same: \\(g_m\\)-controlled current source, \\(r_o\\), and optionally \\(g_{mb}\\).\n- For a **PMOS**, the voltage/current polarities are reversed relative to NMOS:\n  - use \\(v_{sg}\\) instead of \\(v_{gs}\\),\n  - current source direction is source \\(\\to\\) drain (opposite of NMOS drain \\(\\to\\) source convention).\n\nSo, think of PMOS as a mirror/sign-reversed version of the NMOS small-signal model.",
        "format": "markdown",
        "sha256": "46b6ffb7219f82e2d03eb1507ac443054f54a1fc0beb90833af6b79d0ca68174"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model and notes the reversed polarity conventions, matching the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1696,
        "total_tokens": 1722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1558,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1696,
        "total_tokens": 1722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1558,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **diode-connected NMOS** (\\(g\\) tied to \\(d\\)), with source at ground.\n\nSo:\n\\[\nV_{GS}=V_{DS}=V_X\n\\]\n\nHence \\(I_X\\) is the NMOS drain current:\n\n\\[\nI_X(V_X)=\n\\begin{cases}\n\\approx 0, & V_X < V_{TN} \\\\\n\\dfrac{1}{2}k_n(V_X-V_{TN})^2 \\quad (\\text{or } \\times(1+\\lambda V_X)\\text{ if CLM included}), & V_X\\ge V_{TN}\n\\end{cases}\n\\]\n\nSo the sketch is:\n\n- flat near zero current until \\(V_X=V_{TN}\\),\n- then rises **quadratically** (concave up) for larger \\(V_X\\).\n\nRough shape:\n\n\\[\n\\text{(}I_X\\text{)}\n\\quad\n\\begin{array}{c}\n\\text{ }\\\\[-2mm]\n| \\\\\n| \\\\\n| \\qquad\\quad / \\\\\n| \\qquad\\ \\, / \\\\\n| \\qquad\\, / \\\\\n|_________/________________ (V_X)\\\\\n\\qquad V_{TN}\n\\end{array}\n\\]\n\n(If your class includes body-diode effects, for sufficiently negative \\(V_X\\) you’d get a large negative current branch due to the drain-body diode.)",
        "format": "markdown",
        "sha256": "d00009cd8ee4269c3547062bafd3d9e1027ffdfc770bae4200e9f6f58b16dd97"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, near-zero current below threshold, and a quadratic rise above threshold. The added channel-length-modulation and negative-voltage comments are acceptable.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 2944,
        "total_tokens": 4150,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 2944,
        "total_tokens": 4150,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **diode-connected NMOS** (\\(g\\) tied to \\(d\\)), with source at ground.\n\nSo\n\\[\nV_{GS}=V_{DS}=V_X.\n\\]\n\nHence:\n\n- For \\(V_X < V_{TN}\\): transistor is off, \\(I_X \\approx 0\\).\n- For \\(V_X \\ge V_{TN}\\): transistor is on and always in saturation, so\n\\[\nI_X=\\frac{1}{2}k_n(V_X-V_{TN})^2\n\\]\n(or \\(\\frac{1}{2}k_n(V_X-V_{TN})^2(1+\\lambda V_X)\\) if channel-length modulation is included).\n\nSo the sketch is:\n\n- flat at zero current until \\(V_X=V_{TN}\\),\n- then rises as a **parabola** (diode-like turn-on shape).\n\n\\[\nI_X \\text{ vs } V_X:\n\\]\n\n```text\nI_X\n ^\n |                          .\n |                      . \n |                  .\n |              .\n |          .\n |_________.____________________> V_X\n          V_TN\n```\n\n(If your course includes body-diode effects, there is also a negative-current branch for sufficiently negative \\(V_X\\), around \\(-0.7\\) V.)",
        "format": "markdown",
        "sha256": "c88a991433b2f9310d6f19462733f434618d6a00559a96a8315c3b391530b008"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives near-zero current below threshold and a quadratic rise above threshold, and correctly notes saturation. The optional channel-length modulation and negative-voltage body-diode comments do not detract.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 5345,
        "total_tokens": 6551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5064,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 5345,
        "total_tokens": 6551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5064,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **diode-connected NMOS** (\\(g\\) and \\(d\\) tied together at the top node), with source at ground.\n\nSo:\n\\[\nV_{GS}=V_{DS}=V_X\n\\]\n\nHence the operating regions are:\n\n\\[\nI_X \\approx\n\\begin{cases}\n0, & V_X < V_{TN} \\quad (\\text{cutoff})\\\\[4pt]\n\\dfrac{1}{2}k_n (V_X-V_{TN})^2(1+\\lambda V_X), & V_X \\ge V_{TN}\n\\end{cases}\n\\]\n(If channel-length modulation is neglected, drop \\((1+\\lambda V_X)\\).)\n\nBecause \\(V_D=V_G\\), once it turns on it is always in saturation.\n\n### Sketch (ideal MOS, ignoring body diode)\n- \\(I_X=0\\) until \\(V_X=V_{TN}\\)\n- then \\(I_X\\) rises as a **quadratic** (concave up) for larger \\(V_X\\)\n\n\\[\n\\text{(}I_X\\text{ vs }V_X\\text{)}:\n\\quad\n\\begin{array}{c}\nI_X\\\\\n\\uparrow\\\\\n\\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ .\\\\\n\\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ .\\\\\n\\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ .\\\\\n\\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ .\\\\\n\\_\\_\\_\\_\\_\\_\\_\\_\\_\\_\\_\\_\\_\\_\\_\\_\\_\\_\\_\\_.\\_\\_\\_\\_\\_\\_\\_\\_\\_\\_\\_\\to V_X\\\\\n\\hspace{4.4em}V_{TN}\n\\end{array}\n\\]\n\n(If you include the intrinsic body diode, there is also a negative-current branch for sufficiently negative \\(V_X\\), around \\(-0.7\\) V and below.)",
        "format": "markdown",
        "sha256": "43601243708934d426fc381124e73b0cc39d73dee6ce909e2ff1e7ebf41456d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives near-zero current below threshold and a quadratic rise above threshold, and correctly notes saturation. The optional body-diode comment is consistent with the solution.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 6882,
        "total_tokens": 8088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6414,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 6882,
        "total_tokens": 8088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6414,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **nMOS** with source at ground:\n\n- \\(V_G = V_X\\)\n- \\(V_S = 0\\)\n- \\(V_D = 1\\text{ V}\\)\n\nSo\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\text{ V}\n\\]\nand \\(I_X\\) is the drain current (in the arrow direction).\n\nFor a long-channel MOSFET (ideal square-law):\n\n\\[\nI_X(V_X)=\n\\begin{cases}\n0, & V_X \\le V_T \\quad(\\text{cutoff})\\\\[4pt]\n\\dfrac{1}{2}k_n(V_X-V_T)^2, & V_T < V_X \\le V_T+1 \\quad(\\text{saturation})\\\\[6pt]\nk_n\\!\\left[(V_X-V_T)(1)-\\dfrac{1}{2}(1)^2\\right], & V_X \\ge V_T+1 \\quad(\\text{triode})\n\\end{cases}\n\\]\n\nSo the sketch is:\n\n- **Zero** current up to \\(V_X=V_T\\),\n- then a **rising parabola**,\n- then at \\(V_X=V_T+1\\) it smoothly becomes a **straight line** increasing with \\(V_X\\).\n\n(If your class ignores triode here, draw only the zero part + parabola.)",
        "format": "markdown",
        "sha256": "f8fcde122e32fb5426ba028ffe6073ce4ac9baf37be0ffb1c68b3d57232a09da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly shows a quadratic rise from threshold to V_T+1 V, followed by a roughly linear rise in triode; the conditional caveat does not change the main answer.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 7090,
        "total_tokens": 8459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6779,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 7090,
        "total_tokens": 8459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6779,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **enhancement NMOS** with source at ground:\n\n- \\(V_{GS}=V_X\\)\n- \\(V_{DS}=1\\,\\text{V}\\) (fixed by the right supply)\n- \\(I_X\\) (arrow shown leftward on top wire) is the drain current from the \\(+1\\text{ V}\\) source into \\(M_1\\).\n\nSo the transfer is piecewise:\n\n\\[\nI_X \\approx\n\\begin{cases}\n0, & V_X \\le V_T \\\\[4pt]\n\\dfrac{\\beta_n}{2}(V_X-V_T)^2, & V_T < V_X \\le V_T+1 \\\\[8pt]\n\\beta_n\\!\\left[(V_X-V_T)-\\dfrac{1}{2}\\right], & V_X > V_T+1\n\\end{cases}\n\\]\n(\\(\\beta_n=\\mu_n C_{ox}W/L\\), ignoring channel-length modulation)\n\n### Sketch shape\n- **Flat at zero** until \\(V_X=V_T\\) (cutoff).\n- Then **rises quadratically** (saturation region).\n- At \\(V_X=V_T+1\\), it transitions smoothly to a **straight line** (triode region).\n\nRough sketch:\n\n\\[\n\\text{(}I_X\\text{)}\n\\quad\n\\begin{array}{c}\n\\text{ }\\\\[-4pt]\n\\includegraphics[width=0pt]{}\n\\end{array}\n\\]\n\n```\nIx\n^\n|                           /\n|                        /\n|                     /\n|                  .'\n|               .'\n|            .'\n|         .'\n|_______.________________________> Vx\n       Vt        Vt+1\n```\n\nIf your class assumes only \\(0\\le V_X\\le 1\\text{ V}\\), you may only see the first two parts (zero, then quadratic rise).",
        "format": "markdown",
        "sha256": "02262b1c6b9db4249c128907a0e6f3c21712bfbee3813bec62575706cf2e613c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives the zero, quadratic-saturation, and roughly linear-triode regions, with the transition at VX = VT + 1 V and appropriate current expressions.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1369,
        "output_tokens": 5478,
        "total_tokens": 6847,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5057,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1369,
        "output_tokens": 5478,
        "total_tokens": 6847,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5057,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat \\(M_1\\) as an **nMOS** with source at ground, drain fixed at \\(+1\\text{ V}\\), and gate driven by \\(V_X\\).\n\nSo:\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\text{ V}\n\\]\nand \\(I_X\\) is the drain current (positive in the arrow direction).\n\nUsing the long-channel square-law model (ignore \\(\\lambda\\)):\n\n\\[\nI_X(V_X)=\n\\begin{cases}\n0, & V_X\\le V_{TN} \\\\[4pt]\n\\dfrac{1}{2}\\beta_n (V_X-V_{TN})^2, & V_{TN}<V_X\\le V_{TN}+1 \\\\[6pt]\n\\beta_n\\!\\left[(V_X-V_{TN})(1)-\\dfrac{1^2}{2}\\right]\n=\\beta_n\\left(V_X-V_{TN}-0.5\\right), & V_X\\ge V_{TN}+1\n\\end{cases}\n\\]\n\nSo the sketch is:\n\n- flat at zero until \\(V_X=V_{TN}\\) (cutoff),\n- then rises **quadratically** (saturation region),\n- then after \\(V_X=V_{TN}+1\\) becomes a **straight line** (triode region).\n\n(If your class only considers \\(0\\le V_X\\le1\\text{ V}\\), you’d only see cutoff + the quadratic part.)",
        "format": "markdown",
        "sha256": "a851f09a0f22fa33ba9fc900aef7180757a435ce0684f894cb7473ac1cf00d46"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, quadratic saturation region through V_X = V_{TN}+1 V, and roughly linear triode-region rise beyond it.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 5257,
        "total_tokens": 6626,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4935,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 5257,
        "total_tokens": 6626,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4935,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**As drawn, not as an ideal current source.**\n\nThis MOSFET is effectively **diode-connected** (gate and drain at the same potential), so the current \\(I_X\\) is a function of the terminal voltage at \\(X\\).  \nThat means it behaves like a **nonlinear resistor/diode-like element**, not a source with constant current independent of voltage.\n\nSo:\n\n- **Current source behavior?** ❌ Not by itself.\n- **Can it be part of a current-bias/mirror setup?** ✅ Yes, with additional circuitry.\n\n(If someone interpreted it as an enhancement NMOS with \\(V_{GS}=0\\), it would be mostly off except leakage.)",
        "format": "markdown",
        "sha256": "0ff8fa5e8cadd9b44fc060566b8a256e03eb556216fa2ab3db449863a36bd0b1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that the diode-connected device is not a current source and explains that its current varies with terminal voltage. It does not identify M1 as a PMOS or explicitly state the low small-signal impedance (about 1/gm).",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 10689,
        "total_tokens": 11189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10539,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 10689,
        "total_tokens": 11189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10539,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Not as drawn (for a normal enhancement MOSFET).**\n\nThis connection fixes two terminals at ground, so the transistor cannot enforce a voltage-independent current at node \\(x\\):\n\n- If interpreted as the shown **PMOS** (source at top), gate and drain are both at 0 V → it is **diode-connected**.  \n  Then \\(I_x\\) is a function of \\(V_x\\) (roughly \\(I_x \\propto (V_x-|V_T|)^2\\) when on), so it behaves like a nonlinear resistor, not an ideal current source.\n- If interpreted as **NMOS** with \\(V_{GS}=0\\), it is simply off (except leakage/body diode effects).\n\nSo: **it does not act as an ideal current source by itself.**",
        "format": "markdown",
        "sha256": "e015575f9c6360d018e5c2c141ebfc1b2c28a29e2995a7a86f8ce5cf97ad11a4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the PMOS and its diode-connected terminals, and explains that its current varies with VX rather than acting as a current source. It omits the key low-impedance explanation (about 1/gm), so it does not qualify for full credit.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 9766,
        "total_tokens": 10266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9592,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 9766,
        "total_tokens": 10266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9592,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not as an **ideal current source**, no.\n\nIn this connection, \\(M_1\\) is effectively **diode-connected** (gate and drain at ground), so the current \\(I_x\\) is set by the terminal voltage at the top node. That means \\(I_x\\) varies with \\(V_x\\) (roughly square-law when on), so it behaves like a nonlinear resistor/clamp, not a constant-current element.\n\nSo: it can conduct/sink current, but it does **not** provide a load-independent current source by itself.",
        "format": "markdown",
        "sha256": "517abd95d9dc15c344d74c9314c05b71c419326962c3a8a888e2256a662bde17"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that the diode-connected device’s current depends on its terminal voltage, so it is not a current source. It does not identify M1 as a PMOS or explicitly state its low small-signal impedance.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 8848,
        "total_tokens": 9348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8727,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 8848,
        "total_tokens": 9348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8727,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is a **pMOS** (as drawn), this is a **source-degenerated common-source stage**:\n\n- source: to \\(V_{DD}\\) through \\(R_S\\)\n- drain/output: to ground through \\(R_D\\)\n- input at gate\n\nSo it is an **inverting** stage.\n\n### 1) DC (large-signal) relations\nLet \\(I_D\\) be the pMOS current magnitude (source \\(\\to\\) drain).\n\n\\[\nV_S = V_{DD} - I_D R_S,\\qquad\nV_{out}=V_D = I_D R_D\n\\]\n\n\\[\nV_{SG}=V_S - V_{in},\\qquad\nV_{SD}=V_S - V_D\n\\]\n\n- **Cutoff:** \\(V_{SG}\\le |V_{TP}|\\Rightarrow I_D\\approx 0,\\;V_{out}\\approx 0\\)\n- **Saturation:** \\(V_{SG}>|V_{TP}|\\) and\n  \\[\n  V_{SD}\\ge V_{SG}-|V_{TP}|\n  \\;\\Longleftrightarrow\\;\n  V_{out}\\le V_{in}+|V_{TP}|\n  \\]\n  with\n  \\[\n  I_D=\\frac{\\beta_p}{2}(V_{SG}-|V_{TP}|)^2(1+\\lambda V_{SD})\n  \\]\n- **Triode:** opposite inequality.\n\n---\n\n### 2) Small-signal gain (around a saturation bias point)\n\nIgnoring body effect, and first taking \\(r_o\\to\\infty\\):\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n= -\\frac{g_m R_D}{1+g_m R_S}\n\\]\n\nIncluding finite \\(r_o\\):\n\n\\[\nA_v=\n-\\frac{g_m R_D r_o}\n{r_o+R_S+R_D+g_m R_S r_o}\n\\]\n\nSo:\n- sign is **negative** (inversion),\n- \\(R_S\\) provides local negative feedback (lower gain, better linearity/bias stability).\n\n---\n\n### 3) Other useful results\n\n- \\(R_{in}\\approx \\infty\\) (MOS gate)\n- \\(R_{out}\\approx R_D \\parallel \\big[r_o+(1+g_m r_o)R_S\\big]\\)\n\n---\n\nIf you want, I can also derive a full \\(V_{out}(V_{in})\\) piecewise transfer curve (cutoff/sat/triode) from these equations.",
        "format": "markdown",
        "sha256": "998a02db8995d21ab2fcb656d87bec853534528ff63b6b13b9a41cc0fd6cedf7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain \u001b[0m-\u001b[0mg_mR_D/(1+g_mR_S).",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 14156,
        "total_tokens": 15582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13595,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 14156,
        "total_tokens": 15582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13595,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is the **pMOS** device indicated by the symbol, this is a **source-degenerated common-source amplifier**:\n\n- source \\(\\to\\) top node (through \\(R_S\\) to \\(V_{DD}\\))\n- drain \\(\\to\\) output node (through \\(R_D\\) to ground)\n- gate \\(\\to V_{in}\\)\n\n---\n\n### 1) DC (large-signal) relations\n\nLet \\(I_D\\) be the pMOS current from source to drain.\n\n\\[\nV_S = V_{DD} - I_D R_S,\\qquad\nV_{out}=V_D=I_D R_D\n\\]\n\n\\[\nV_{SG}=V_S-V_{in},\\qquad\nV_{SD}=V_S-V_D\n\\]\n\nSo:\n\n\\[\nV_{SG}=V_{DD}-I_D R_S - V_{in}\n\\]\n\\[\nV_{SD}=V_{DD}-I_D(R_S+R_D)\n\\]\n\nIf in saturation (ignoring channel-length modulation first):\n\n\\[\nI_D=\\frac{\\beta_p}{2}\\left(V_{SG}-|V_{TP}|\\right)^2\n\\]\n\nwhich gives the implicit bias equation:\n\n\\[\n\\frac{V_{out}}{R_D}\n=\n\\frac{\\beta_p}{2}\n\\left(V_{DD}-V_{in}-\\frac{R_S}{R_D}V_{out}-|V_{TP}|\\right)^2\n\\]\n\nRegion conditions:\n\n- **Cutoff**: \\(V_{SG}\\le |V_{TP}|\\)\n- **Saturation**: \\(V_{SD}\\ge V_{SG}-|V_{TP}|\\) (equivalently \\(V_{out}\\le V_{in}+|V_{TP}|\\))\n- **Triode** otherwise\n\n---\n\n### 2) Small-signal gain (about a bias point)\n\nWith transconductance \\(g_m\\), output resistance \\(r_o\\):\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n=\n-\\frac{g_m R_D r_o}{R_D+R_S+r_o+g_m R_S r_o}\n\\]\n\nUseful limits:\n\n- If \\(r_o\\to\\infty\\):\n\\[\nA_v\\approx -\\frac{g_m R_D}{1+g_m R_S}\n\\]\n- If also \\(g_mR_S\\gg1\\):\n\\[\nA_v\\approx -\\frac{R_D}{R_S}\n\\]\n\nSo \\(R_S\\) gives negative feedback: lower gain, better linearity/bias stability.\n\n---\n\n### 3) Input/output resistances\n\n- \\(R_{in}\\approx\\infty\\) (MOS gate)\n- \\(R_{out}\\approx R_D \\parallel \\left[r_o(1+g_mR_S)+R_S\\right]\\)\n\n---\n\nIf you want, I can also derive a full \\(V_{out}\\)-vs-\\(V_{in}\\) piecewise transfer curve (cutoff/sat/triode) explicitly.",
        "format": "markdown",
        "sha256": "83adb6deb208ee072b0a7b1c275aca922d468395f455c1d9e43df53c66d61dc4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain, including valid refinements for finite output resistance.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1426,
        "output_tokens": 10103,
        "total_tokens": 11529,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9442,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1426,
        "output_tokens": 10103,
        "total_tokens": 11529,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9442,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is a **PMOS** (as drawn: source at top through \\(R_S\\), drain at bottom through \\(R_D\\)).\n\n### 1) DC relations\nThe same DC current \\(I_D\\) flows through \\(R_S\\), \\(M_1\\), and \\(R_D\\):\n\n\\[\nV_S = V_{DD}-I_D R_S,\\qquad V_{out}=V_D=I_D R_D\n\\]\n\n\\[\nV_{SG}=V_S-V_{in}=V_{DD}-I_D R_S -V_{in}\n\\]\n\n\\[\nV_{SD}=V_S-V_D=V_{DD}-I_D(R_S+R_D)\n\\]\n\n---\n\n### 2) Region conditions\n\n- **Cutoff**: \\(V_{SG}\\le |V_{TP}|\\)  \n  Approx boundary (since \\(I_D\\to 0\\)):  \n  \\[\n  V_{in}\\gtrsim V_{DD}-|V_{TP}|\n  \\]\n  Then \\(I_D\\approx 0,\\; V_{out}\\approx 0\\).\n\n- **Saturation**: \\(V_{SG}>|V_{TP}|\\) and \\(V_{SD}\\ge V_{SG}-|V_{TP}|\\).  \n  Equivalent condition here:\n  \\[\n  V_{out}\\le V_{in}+|V_{TP}|\n  \\]\n  Current law (ignore \\(\\lambda\\)):\n  \\[\n  I_D=\\frac{\\beta_p}{2}\\left(V_{DD}-V_{in}-|V_{TP}|-I_D R_S\\right)^2\n  \\]\n  and \\(V_{out}=I_D R_D\\).\n\n- **Triode**: \\(V_{out}>V_{in}+|V_{TP}|\\), with\n  \\[\n  I_D=\\beta_p\\!\\left[(V_{SG}-|V_{TP}|)V_{SD}-\\frac{V_{SD}^2}{2}\\right]\n  \\]\n\n---\n\n### 3) Small-signal gain (biased in saturation)\n\nThis is a **source-degenerated common-source PMOS** stage.\n\n- With \\(r_o\\to\\infty\\):\n\\[\nA_v=\\frac{v_{out}}{v_{in}} \\approx -\\frac{g_m R_D}{1+g_m R_S}\n\\]\n\n- Including \\(r_o\\):\n\\[\nA_v \\approx -\\frac{g_m R_D}{1+g_mR_S+\\frac{R_S+R_D}{r_o}}\n\\]\n\nSo gain is **negative** (inverting): \\(V_{in}\\uparrow \\Rightarrow I_D\\downarrow \\Rightarrow V_{out}\\downarrow\\).\n\n---\n\n### 4) Input/output resistance\n\\[\nR_{in}\\approx \\infty \\quad (\\text{MOS gate})\n\\]\n\\[\nR_{out}\\approx R_D \\parallel \\left[r_o(1+g_mR_S)+R_S\\right]\n\\]\n\nIf you want, I can also give a compact piecewise \\(V_{out}(V_{in})\\) transfer curve.",
        "format": "markdown",
        "sha256": "9e16d19cdb177f3c2c7b8a9b91b7ead57a594c0fc552516a55c9ffb59364a636"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain specified by the golden solution; the finite-ro refinement is appropriate.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 10870,
        "total_tokens": 12296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10188,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 10870,
        "total_tokens": 12296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10188,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **NMOS** with drain at \\(V_{DD}\\), source at \\(V_{out}\\), and \\(R_S\\) to ground:\n\n## 1) What this circuit is\nThis is a **source follower** (common-drain stage) with resistive source bias.\n\n- Non-inverting\n- Voltage gain \\(<1\\)\n- High input resistance (MOS gate)\n- Low output resistance (buffer-like behavior)\n\n---\n\n## 2) DC (large-signal) analysis\n\nLet \\(V_o \\equiv V_{out}\\).\n\n\\[\nI_D = \\frac{V_o}{R_S}\n\\]\n\\[\nV_{GS} = V_{in} - V_o,\\qquad V_{DS}=V_{DD}-V_o\n\\]\n\n### Cutoff\nIf \\(V_{in}\\lesssim V_T\\), transistor is off:\n\\[\nI_D \\approx 0,\\quad V_o \\approx 0\n\\]\n\n### On-state (usually saturation here)\nFor long-channel model:\n\\[\nI_D=\\frac{1}{2}\\beta (V_{GS}-V_T)^2(1+\\lambda V_{DS})\n\\]\nSo:\n\\[\n\\frac{V_o}{R_S}\n=\n\\frac{1}{2}\\beta (V_{in}-V_o-V_T)^2(1+\\lambda(V_{DD}-V_o))\n\\]\n\nIf \\(\\lambda\\approx0\\):\n\\[\n\\frac{V_o}{R_S}=\\frac{1}{2}\\beta (V_{in}-V_o-V_T)^2\n\\]\n\nSaturation condition:\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\Rightarrow\nV_{DD}\\ge V_{in}-V_T\n\\]\nSo for normal \\(V_{in}\\le V_{DD}\\), it stays in saturation once on.\n\n---\n\n## 3) Small-signal gain\n\nAround a bias point:\n\\[\nA_v=\\frac{v_o}{v_{in}}\n=\n\\frac{g_m(R_S\\parallel r_o)}{1+g_m(R_S\\parallel r_o)}\n\\]\nIf \\(r_o\\to\\infty\\):\n\\[\nA_v \\approx \\frac{g_mR_S}{1+g_mR_S}\n\\]\nSo \\(0<A_v<1\\), and for \\(g_mR_S\\gg1\\), \\(A_v\\to1\\).\n\n---\n\n## 4) Key interpretation\n\n- \\(V_o\\) “follows” \\(V_{in}\\), roughly:\n  \\[\n  V_o \\approx V_{in}-V_{GS}\n  \\]\n- This stage is mainly a **buffer/level shifter**: high \\(R_{in}\\), low \\(R_{out}\\), no phase inversion.\n\nIf you want, I can also give the explicit closed-form \\(V_o(V_{in})\\) expression (with \\(\\lambda=0\\)) and/or include body effect (\\(g_{mb}\\), \\(V_T(V_{SB})\\)).",
        "format": "markdown",
        "sha256": "ed7dc3f5bbbd1b4a7bcd4a1132f831238f98a1dfa53d43b93df27572ddd49837"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including the standard limiting case. The extra analysis is consistent with the topology.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 9028,
        "total_tokens": 10177,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8377,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 9028,
        "total_tokens": 10177,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8377,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **NMOS** (as drawn), this is a **common-drain (source follower)** stage with source resistor \\(R_S\\).\n\n### 1) What the circuit does\n- Drain is tied to \\(V_{DD}\\).\n- Input is at gate (\\(V_{in}\\)).\n- Output is at source (\\(V_{out}\\)).\n- So \\(V_{out}\\) “follows” \\(V_{in}\\), but with gain slightly less than 1 and a DC level shift.\n\n---\n\n### 2) DC (large-signal) analysis\n\n\\[\nI_D = \\frac{V_{out}}{R_S}\n\\]\n\nIf \\(V_{in}\\le V_T\\): transistor off \\(\\Rightarrow I_D\\approx 0\\), so\n\\[\nV_{out}\\approx 0\n\\]\n\nIf on (and in saturation, usually true here):\n\\[\nI_D=\\frac{1}{2}k_n(V_{GS}-V_T)^2\n\\]\nwith\n\\[\nV_{GS}=V_{in}-V_{out}\n\\]\nso\n\\[\n\\frac{V_{out}}{R_S}=\\frac{1}{2}k_n\\big(V_{in}-V_{out}-V_T\\big)^2\n\\]\n\nEquivalent form:\n\\[\nV_{in}=V_T+V_{out}+\\sqrt{\\frac{2V_{out}}{k_nR_S}}\n\\]\n\nSaturation condition:\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\;\\Rightarrow\\;\nV_{DD}-V_{out}\\ge V_{in}-V_{out}-V_T\n\\;\\Rightarrow\\;\nV_{DD}\\ge V_{in}-V_T\n\\]\nTypically satisfied for \\(V_{in}\\le V_{DD}\\), so source follower operation is valid.\n\n---\n\n### 3) Small-signal gain\n\nIgnoring body effect and using finite \\(r_o\\):\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\\frac{g_m(R_S\\parallel r_o)}{1+g_m(R_S\\parallel r_o)}\n\\]\n\nIf \\(r_o\\to\\infty\\):\n\\[\nA_v\\approx \\frac{g_mR_S}{1+g_mR_S}<1\n\\]\nSo it is **non-inverting**, near-unity gain when \\(g_mR_S\\gg1\\).\n\n(If body is at ground, include \\(g_{mb}\\): gain drops a bit.)\n\n---\n\n### 4) Useful interpretation\nThis stage is a **buffer / level shifter**:\n\\[\nV_{out}\\approx V_{in}-V_{GS}\n\\]\nwith high input resistance and relatively low output resistance.",
        "format": "markdown",
        "sha256": "28fc58a92204d496ec9511606f2b254e6bcc6186971307b560468cff6a9608b0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including the required ideal expression and a valid finite-ro refinement. The additional DC analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 6905,
        "total_tokens": 8054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6312,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 6905,
        "total_tokens": 8054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6312,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **NMOS** (as the \\(R_S\\) source resistor label suggests), this is a **source follower** (common-drain stage).\n\n### 1) What the circuit does\n- Drain is tied to \\(V_{DD}\\) (AC ground for small-signal).\n- Input is at gate: \\(V_{in}\\).\n- Output is at source: \\(V_{out}\\).\n- \\(R_S\\) sets DC current and provides local feedback.\n\nSo \\(V_{out}\\) “follows” \\(V_{in}\\) (non-inverting), but with gain \\(<1\\).\n\n---\n\n### 2) DC (large-signal) analysis\n\n\\[\nI_D=\\frac{V_{out}}{R_S}\n\\]\n\nFor NMOS in saturation (ignoring channel-length modulation):\n\\[\nI_D=\\frac{k_n}{2}(V_{GS}-V_T)^2\n\\quad,\\quad\nV_{GS}=V_{in}-V_{out}\n\\]\n\nHence:\n\\[\n\\frac{V_{out}}{R_S}\n=\\frac{k_n}{2}(V_{in}-V_{out}-V_T)^2\n\\]\n\nThis gives the transfer \\(V_{out}(V_{in})\\) (implicit form).\n\nPiecewise behavior:\n- If \\(V_{in}\\le V_T\\): transistor off \\(\\Rightarrow I_D\\approx0,\\;V_{out}\\approx0\\).\n- If \\(V_{in}>V_T\\): transistor on, \\(V_{out}\\) rises and tracks \\(V_{in}\\).\n\nSaturation condition:\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\;\\Rightarrow\\;\nV_{DD}-V_{out}\\ge V_{in}-V_{out}-V_T\n\\;\\Rightarrow\\;\nV_{in}\\le V_{DD}+V_T\n\\]\nUsually true in normal single-supply operation (\\(V_{in}\\le V_{DD}\\)), so it typically stays in saturation.\n\n---\n\n### 3) Small-signal gain\n\nWith \\(r_o\\) included:\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m(R_S\\parallel r_o)}\n{1+(g_m+g_{mb})(R_S\\parallel r_o)}\n\\]\n(If body effect neglected, set \\(g_{mb}=0\\).)\n\nCommon approximation (\\(r_o\\gg R_S,\\;g_{mb}\\approx0\\)):\n\\[\nA_v \\approx \\frac{g_mR_S}{1+g_mR_S}<1\n\\]\nSo it is non-inverting and close to unity when \\(g_mR_S\\gg1\\).\n\n---\n\n### 4) Input/output resistance (useful summary)\n- \\(R_{in}\\): very high (MOS gate).\n- \\(R_{out}\\): low-ish, roughly\n\\[\nR_{out}\\approx\n\\left(\\frac{1}{g_m+g_{mb}}\\right)\\parallel r_o \\parallel R_S\n\\]\nSo it works well as a **buffer**.\n\n---\n\nIf you want, I can also derive an explicit closed-form \\(V_{out}(V_{in})\\) expression from the quadratic and/or include body-effect in the DC equation.",
        "format": "markdown",
        "sha256": "cdf86d838bc04505c17abb6064920f36a28bf4c34f182241a6bd1d148165d9b6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including a valid refinement for body effect and finite output resistance. The supplementary analysis is consistent with the topology.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 6631,
        "total_tokens": 7780,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5924,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 6631,
        "total_tokens": 7780,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5924,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an **nMOS** with gate tied to \\(V_{DD}\\), drain at \\(V_{out}\\), source at \\(V_{in}\\), and load resistor \\(R_D\\) to \\(V_{DD}\\).\n\nThis is a **common-gate stage** (input at source, output at drain), with a pull-up resistor.\n\n### 1) Basic relations\n\\[\nV_{GS}=V_{DD}-V_{in},\\quad\nV_{DS}=V_{out}-V_{in},\\quad\nI_D=\\frac{V_{DD}-V_{out}}{R_D}\n\\]\n\n---\n\n### 2) DC operating regions\n\n## (a) Cutoff\nIf\n\\[\nV_{GS}\\le V_T \\;\\Rightarrow\\; V_{in}\\ge V_{DD}-V_T\n\\]\nthen \\(I_D\\approx 0\\), so\n\\[\nV_{out}\\approx V_{DD}\n\\]\n\n## (b) Saturation\nIf transistor is on and\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\]\nthen (ignoring channel-length modulation)\n\\[\nI_D=\\frac{\\beta_n}{2}(V_{DD}-V_{in}-V_T)^2\n\\]\nand\n\\[\nV_{out}=V_{DD}-R_D\\frac{\\beta_n}{2}(V_{DD}-V_{in}-V_T)^2\n\\]\n\n## (c) Triode\nIf on and\n\\[\nV_{DS}<V_{GS}-V_T\n\\]\nthen\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\beta_n\\!\\left[(V_{DD}-V_{in}-V_T)(V_{out}-V_{in})\n-\\frac{(V_{out}-V_{in})^2}{2}\\right]\n\\]\n(implicit quadratic in \\(V_{out}\\)).\n\n---\n\n### 3) Small-signal (biased in saturation)\nAC-wise, gate is grounded (since tied to \\(V_{DD}\\)).\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx +g_m(R_D\\parallel r_o)\n\\]\n(positive gain; with \\(r_o\\gg R_D\\): \\(A_v\\approx +g_mR_D\\)).\n\n\\[\nR_{in}\\approx \\frac{1}{g_m}\\quad (\\text{or }1/(g_m+g_{mb}) \\text{ if body effect included})\n\\]\n\\[\nR_{out}\\approx R_D\\parallel r_o\n\\]\n\n---\n\n### 4) Qualitative behavior\n- \\(V_{in}\\uparrow \\Rightarrow V_{GS}\\downarrow \\Rightarrow I_D\\downarrow \\Rightarrow\\) less drop on \\(R_D\\) \\(\\Rightarrow V_{out}\\uparrow\\)\n- So this stage is **non-inverting** (common-gate behavior).",
        "format": "markdown",
        "sha256": "0ffead4eb5d7896afb3d6402f801a1711dcbaf22e3b484472bdc8e0460c24123"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source as the input and the stage as common-gate, with the gate AC-grounded. It gives the correct non-inverting gain and approximately 1/gm input resistance; the DC-region analysis is also consistent with the stated nMOS topology.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 8556,
        "total_tokens": 9672,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7918,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 8556,
        "total_tokens": 9672,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7918,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **nMOS** (as drawn), this is a **common-gate stage**:\n\n- Gate: fixed at \\(V_G=V_{DD}\\)\n- Source: input \\(V_S=V_{in}\\)\n- Drain: output \\(V_D=V_{out}\\), loaded by \\(R_D\\) to \\(V_{DD}\\)\n\nSo:\n\\[\nV_{GS}=V_{DD}-V_{in},\\qquad\nV_{DS}=V_{out}-V_{in},\\qquad\nI_D=\\frac{V_{DD}-V_{out}}{R_D}\n\\]\n\n## 1) DC operating regions\n\nLet \\(\\beta=\\mu_n C_{ox}(W/L)\\), threshold \\(V_T\\).\n\n### Cutoff\n\\[\nV_{GS}<V_T \\;\\Rightarrow\\; V_{in}>V_{DD}-V_T\n\\]\nThen \\(I_D\\approx 0\\), so:\n\\[\nV_{out}\\approx V_{DD}\n\\]\n\n### Saturation\n\\[\nV_{in}<V_{DD}-V_T,\\quad V_{out}\\ge V_{DD}-V_T\n\\]\n\\[\nI_D=\\frac12\\beta(V_{DD}-V_{in}-V_T)^2\n\\]\n\\[\nV_{out}=V_{DD}-R_D I_D\n\\]\n\n### Triode\n\\[\nV_{in}<V_{DD}-V_T,\\quad V_{out}<V_{DD}-V_T\n\\]\n\\[\nI_D=\\beta\\!\\left[(V_{DD}-V_{in}-V_T)(V_{out}-V_{in})-\\frac{(V_{out}-V_{in})^2}{2}\\right]\n\\]\nand still \\(I_D=(V_{DD}-V_{out})/R_D\\).\n\n---\n\n## 2) Small-signal behavior (biased in saturation)\n\nThis stage is **non-inverting**:\n- \\(v_{in}\\uparrow \\Rightarrow V_{GS}\\downarrow \\Rightarrow I_D\\downarrow \\Rightarrow\\) drop across \\(R_D\\downarrow \\Rightarrow v_{out}\\uparrow\\)\n\nApprox gain:\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\\approx +g_m(R_D\\parallel r_o)\n\\]\n(If \\(r_o\\gg R_D\\), then \\(A_v\\approx +g_mR_D\\).)\n\nTypical impedances:\n\\[\nR_{in}\\approx \\frac1{g_m}\\quad(\\text{low}),\\qquad\nR_{out}\\approx R_D\\parallel r_o\n\\]\n\n---\n\nSo overall: it is a **common-gate NMOS amplifier / level-shifting stage** with positive gain and low input resistance.",
        "format": "markdown",
        "sha256": "b9c6db8d1ebeece5224d4dab17ae4731e1f7aa7911b73216dbe3390571e5e6ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology, source input, ac-grounded gate, non-inverting gain, and low input resistance. The small-signal expressions match the golden solution; the added DC-region analysis is consistent with the stated NMOS assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 11922,
        "total_tokens": 13038,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 11922,
        "total_tokens": 13038,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an **nMOS** (body tied to source unless stated otherwise).\n\nThis is a **common-gate stage**:\n\n- Gate is fixed at \\(V_{DD}\\) (AC ground),\n- Input is at source (\\(V_{in}\\)),\n- Output is at drain (\\(V_{out}\\)),\n- \\(R_D\\) is the drain load to \\(V_{DD}\\).\n\n---\n\n### 1) DC relationships\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}\n\\]\n\\[\nV_{GS}=V_{DD}-V_{in},\\qquad V_{DS}=V_{out}-V_{in}\n\\]\n\n#### Cutoff condition\n\\[\nV_{GS}\\le V_T \\;\\Rightarrow\\; V_{in}\\ge V_{DD}-V_T\n\\]\nThen \\(I_D\\approx 0\\), so:\n\\[\nV_{out}\\approx V_{DD}\n\\]\n\n#### If ON (\\(V_{in}<V_{DD}-V_T\\)):\n\n- **Saturation** if \\(V_{DS}\\ge V_{GS}-V_T\\), which here becomes\n  \\[\n  V_{out}\\ge V_{DD}-V_T\n  \\]\n  and\n  \\[\n  I_D=\\frac{\\beta}{2}(V_{DD}-V_{in}-V_T)^2\n  \\]\n  so\n  \\[\n  V_{out}=V_{DD}-R_D\\frac{\\beta}{2}(V_{DD}-V_{in}-V_T)^2\n  \\]\n\n- **Triode** otherwise:\n  \\[\n  I_D=\\beta\\!\\left[(V_{DD}-V_{in}-V_T)(V_{out}-V_{in})-\\frac{(V_{out}-V_{in})^2}{2}\\right]\n  \\]\n  with \\(I_D=(V_{DD}-V_{out})/R_D\\) (implicit equation for \\(V_{out}\\)).\n\n---\n\n### 2) Small-signal (around a bias point in saturation)\n\nThis is a **non-inverting** voltage gain stage:\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx +g_m(R_D\\parallel r_o)\n\\]\n(If \\(r_o\\gg R_D\\), \\(A_v\\approx +g_mR_D\\).)\n\nAlso:\n- \\(R_{in}\\) (at source) is low, roughly \\(\\sim 1/g_m\\),\n- \\(R_{out}\\approx R_D\\parallel r_o\\).\n\n---\n\n### 3) Qualitative behavior\n\n- Low \\(V_{in}\\) \\(\\Rightarrow\\) larger \\(V_{GS}\\), transistor stronger ON, \\(V_{out}\\) pulled down.\n- High \\(V_{in}\\) (near \\(V_{DD}\\)) \\(\\Rightarrow\\) transistor OFF, \\(V_{out}\\to V_{DD}\\).\n\nSo \\(V_{out}\\) increases with \\(V_{in}\\) (same polarity, not inverted).",
        "format": "markdown",
        "sha256": "df4a0410c90acfbf12dffd33651fb3a12b14870576d5e44eb38b9e385f9d6bfc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology with source input, gives the non-inverting gain and low source input resistance, and describes the matching signal trend. The additional DC analysis is consistent under its stated nMOS assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 11289,
        "total_tokens": 12405,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10628,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 11289,
        "total_tokens": 12405,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10628,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **NMOS**, here is the key result:\n\n## 1) DC bias (large-signal)\n\n- \\(C_1\\) is open at DC, so \\(V_{in}\\) does not affect bias.\n- Source is tied to ground \\(\\Rightarrow V_S=0\\).\n- Gate is fixed at \\(V_b\\) \\(\\Rightarrow V_{GS}=V_b\\).\n- Drain/output node satisfies\n\\[\nV_{out}=V_D=V_{DD}-I_D R_D\n\\]\n\nIf \\(V_b \\le V_{TH}\\): transistor off, \\(I_D\\approx 0\\), so \\(V_{out}\\approx V_{DD}\\).\n\nIf \\(V_b>V_{TH}\\): transistor on, and (in saturation, neglecting \\(\\lambda\\))\n\\[\nI_D \\approx \\frac{1}{2}k_n(V_b-V_{TH})^2\n\\]\nthen\n\\[\nV_{out}\\approx V_{DD}-R_D\\frac{1}{2}k_n(V_b-V_{TH})^2\n\\]\n(check saturation condition \\(V_{out}\\ge V_b-V_{TH}\\)).\n\n---\n\n## 2) Small-signal AC behavior (as drawn)\n\nThis is the important part:\n\n- \\(V_{DD}\\) is AC ground.\n- \\(V_b\\) is AC ground.\n- Source node is **hard-grounded** in the schematic.\n\nSo the AC source signal through \\(C_1\\) is applied to a node already at ground potential. Therefore:\n\\[\nv_s=0,\\quad v_g=0 \\;\\Rightarrow\\; v_{gs}=0\n\\]\n\\[\ni_d^{(ac)}=g_m v_{gs}=0\n\\]\n\nHence (ideal model):\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=0\n\\]\n\nSo this circuit, **as literally drawn**, does not amplify \\(V_{in}\\); \\(C_1\\) just shunts AC current from \\(V_{in}\\) to ground.\n\n---\n\n## 3) Likely intended circuit\n\nIt looks like a **common-gate stage** was intended (gate at \\(V_b\\), input at source, output at drain), but then the source should **not** be directly shorted to ground for AC.\n\nIf that ground were replaced by a proper bias element (e.g., current source / large resistor), then approximately:\n\\[\nA_v \\approx +g_m(R_D\\parallel r_o),\\quad R_{in}\\approx \\frac{1}{g_m}\n\\]\n\n---\n\nIf you want, I can also draw the corrected small-signal model and derive full gain including \\(C_1\\), source resistance, and \\(r_o\\).",
        "format": "markdown",
        "sha256": "81fb6f453e53cb5a77103351f8b5f40036bfec860c2bb36827acdec5ea7c3729"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Recognizes that the source is hard-shorted to ground, so the input produces no source voltage and the ideal small-signal gain is zero. The extra DC and intended-circuit discussion does not undermine the essential answer.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 10056,
        "total_tokens": 11793,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9459,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 10056,
        "total_tokens": 11793,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9459,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is **(intended to be) a common-gate NMOS amplifier**:\n\n- \\(M_1\\): transconductor\n- \\(R_D\\): drain load\n- \\(V_b\\): DC gate bias\n- \\(C_1\\): input coupling capacitor\n- \\(V_{out}\\): drain output\n\n---\n\n### 1) DC analysis\nAt DC, \\(C_1\\) is open, so \\(V_{in}\\) does not affect bias.\n\nIf source is at 0 V (as drawn), then\n\\[\nV_{GS}=V_b\n\\]\nand (in saturation)\n\\[\nI_D \\approx \\frac{1}{2}k_n(V_b-V_{TH})^2(1+\\lambda V_{DS})\n\\]\n\\[\nV_{OUT,DC}=V_{DD}-I_D R_D\n\\]\nSaturation condition:\n\\[\nV_{OUT,DC}\\gtrsim V_{OV}=V_b-V_{TH}\n\\]\n\n---\n\n### 2) Small-signal (midband) gain\nWith \\(V_b\\) and \\(V_{DD}\\) as AC ground:\n\\[\n\\frac{v_o}{v_s}\n= \\frac{g_m+g_{mb}+1/r_o}{1/R_D+1/r_o}\n\\approx +(g_m+g_{mb})(R_D\\parallel r_o)\n\\approx +g_mR_D \\quad (r_o\\gg R_D,\\ g_{mb}\\approx 0)\n\\]\nSo it is **non-inverting** (common-gate behavior).\n\nInput/output resistances (approx):\n\\[\nR_{in}\\approx \\frac{1}{g_m+g_{mb}} \\ (\\approx 1/g_m),\\qquad\nR_{out}\\approx R_D\\parallel r_o\n\\]\n\n---\n\n### 3) Effect of \\(C_1\\) (low-frequency high-pass)\nIf source has resistance \\(R_{sig}\\):\n\\[\n\\frac{v_s}{v_{in}}=\n\\frac{R_{in}}{R_{sig}+R_{in}}\n\\cdot\n\\frac{s(R_{sig}+R_{in})C_1}{1+s(R_{sig}+R_{in})C_1}\n\\]\nHence:\n\\[\n\\frac{v_o}{v_{in}}=\\frac{v_o}{v_s}\\cdot\\frac{v_s}{v_{in}}\n\\]\nwith low cutoff\n\\[\nf_L \\approx \\frac{1}{2\\pi (R_{sig}+R_{in})C_1}\n\\]\n\n---\n\n### Important literal note about the drawing\nIf interpreted **exactly as drawn**, source node is hard-grounded, so AC input through \\(C_1\\) is shunted to ground and \\(v_s=0\\), giving essentially **zero AC gain from \\(V_{in}\\) to \\(V_{out}\\)**.  \nSo for a practical common-gate amplifier, that source “ground” is usually replaced by a bias element (current source/resistor), not an ideal short.",
        "format": "markdown",
        "sha256": "20f0618dfc4ab94db89aaef43251088b844895e92a90c963f98504653a054a31"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It explicitly notices that the source is hard-grounded as drawn and concludes that the input is shunted, giving essentially zero gain from Vin to Vout. The common-gate gain analysis is clearly qualified as applying when the source is not hard-grounded.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1737,
        "output_tokens": 12247,
        "total_tokens": 13984,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11593,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1737,
        "output_tokens": 12247,
        "total_tokens": 13984,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11593,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Good circuit to discuss — it is **(intended as) a common-gate NMOS stage** with:\n\n- gate DC-biased at \\(V_b\\),\n- drain load \\(R_D\\) to \\(V_{DD}\\),\n- output at drain (\\(V_{out}\\)),\n- input AC-coupled through \\(C_1\\) to source.\n\n---\n\n### 1) DC analysis\nAt DC, \\(C_1\\) is open, so \\(V_{in}\\) does not affect bias.\n\nAssuming NMOS and source at 0 V DC:\n\\[\nV_{GS}=V_b,\\quad I_D \\approx \\frac12 k_n (V_b-V_T)^2 \\quad (\\text{sat, ignore }\\lambda)\n\\]\n\\[\nV_{OUT,DC}=V_{DD}-I_D R_D\n\\]\n\nSaturation condition:\n\\[\nV_{DS}\\ge V_{OV}=V_{GS}-V_T \\;\\Rightarrow\\; V_{OUT,DC}\\ge V_b-V_T\n\\]\n\nIf \\(V_b<V_T\\), transistor is off, \\(I_D\\approx0\\), so \\(V_{out}\\approx V_{DD}\\).\n\n---\n\n### 2) Small-signal (midband) gain (common-gate behavior)\nWith gate at AC ground, source signal \\(v_s\\), drain output \\(v_o\\):\n\\[\nA_{vs}\\equiv \\frac{v_o}{v_s}\n= \\frac{(g_m+g_{mb})+g_{ds}}{1/R_D+g_{ds}}\n\\approx +(g_m+g_{mb})(R_D\\parallel r_o)\n\\]\n(positive/non-inverting source-to-drain voltage gain).\n\nTypical approximations:\n\\[\nR_{in,\\text{source}} \\approx \\frac{1}{g_m+g_{mb}},\\qquad\nR_{out}\\approx R_D\\parallel r_o\n\\]\n\n---\n\n### 3) Effect of coupling capacitor \\(C_1\\)\n\\(C_1\\) creates a high-pass input network. If source has Thevenin resistance \\(R_s\\):\n\\[\n\\frac{v_s}{v_{in}}=\\frac{sC_1R_{in}}{1+sC_1(R_s+R_{in})}\n\\]\n\\[\nf_L \\approx \\frac{1}{2\\pi C_1(R_s+R_{in})}\n\\]\n\nOverall:\n\\[\n\\frac{v_o}{v_{in}} = A_{vs}\\cdot \\frac{sC_1R_{in}}{1+sC_1(R_s+R_{in})}\n\\]\n\n---\n\n### Important note about the drawing as-is\nIf that source node is **literally hard-grounded** (ideal short to ground), then AC input through \\(C_1\\) is shunted and \\(v_s=0\\), so:\n\\[\n\\frac{v_o}{v_{in}}=0\n\\]\n(no signal gain).  \nSo practically, the intended circuit is common-gate with a bias path (not an ideal AC short) at the source node.",
        "format": "markdown",
        "sha256": "41be8ba7891c55dece3c638af5085b6d774bb2dfe1a23ea6ec76045bcb3501d4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It explicitly notices that the source is hard-grounded and concludes that the input is shunted, giving ideally zero gain from Vin. The common-gate gain discussion is clearly framed as hypothetical; the as-drawn conclusion matches the full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 11099,
        "total_tokens": 12836,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10432,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 11099,
        "total_tokens": 12836,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10432,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles** (for \\(V_{out}/V_{in}\\), small-signal AC).\n\nWhy: only **two independent high-impedance nodes** can store dynamic voltage—**gate** and **drain**.  \n- \\(C_{GS}\\) is at the gate node,  \n- \\(C_{DB}\\) is at the drain node,  \n- \\(C_{GD}\\) couples those same two nodes (doesn’t add a third independent state),  \n- \\(C_{SB}\\) is ineffective here since source/body are at AC ground in this drawing.\n\nSo the transfer function denominator is second-order \\(\\Rightarrow\\) **two poles**.",
        "format": "markdown",
        "sha256": "628cffa419c5206649ddb3adc495ad19bee1910fc18fb41592153b0039a7cb8f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and accounts for the capacitors: CSB is shorted by the grounded source/body, while CGD couples the gate and drain without adding an independent state.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 5698,
        "total_tokens": 7670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5550,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 5698,
        "total_tokens": 7670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5550,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\nWhy: in small-signal terms, there are only **two independent dynamic nodes** (gate and drain).  \n- \\(V_{DD}\\) is AC ground.  \n- The source is grounded, so \\(C_{SB}\\) does not create an independent state (it’s effectively from ground to ground).  \n- \\(C_{GD}\\), \\(C_{GS}\\), and \\(C_{DB}\\) shape the response, but still with only two independent node voltages.\n\nSo the transfer function denominator is second-order \\(\\Rightarrow\\) **two poles**.",
        "format": "markdown",
        "sha256": "9fb3bec64dd2880a31fd634c7823d21afead02af5b8bb5837b0cbfdf391749fd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and explains that CSB is shorted between grounded terminals, leaving the other capacitors with only two independent dynamic node voltages.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1972,
        "output_tokens": 4499,
        "total_tokens": 6471,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4368,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1972,
        "output_tokens": 4499,
        "total_tokens": 6471,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4368,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the shown common-source stage (with \\(R_S\\) finite), the transfer function is **second-order**, so it has **2 poles**.\n\nWhy:\n- The only independent high-frequency nodes are **gate** and **drain**.\n- \\(C_{GD}\\) couples those two nodes, \\(C_{GS}\\) is at the gate side, and \\(C_{DB}\\) is at the drain side.\n- The source is AC-grounded in this figure, so \\(C_{SB}\\) does not add an independent dynamic state.\n\n✅ **Number of poles: \\(\\boxed{2}\\)**.",
        "format": "markdown",
        "sha256": "60035e2d72617c0c2bb8d05bc556ad3a74e04d83a9222f479b049265f5ef07ed"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and explains that CSB adds no state because the source is AC-grounded; the remaining capacitors act on the gate and drain nodes.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1972,
        "output_tokens": 3985,
        "total_tokens": 5957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3852,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1972,
        "output_tokens": 3985,
        "total_tokens": 5957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3852,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an **NMOS** and gate current is ~0.\n\n### 1) Topology / what this is\nThis is a **common-gate stage** (\\(v_{in}\\) at source, \\(v_{out}\\) at drain) with a **drain-to-gate resistive feedback divider** \\((R_1,R_2)\\).\n\nDefine:\n\n\\[\n\\beta=\\frac{R_2}{R_1+R_2},\\qquad V_F=V_G=\\beta V_{out}\n\\]\n\nSo gate voltage is a fraction of output.\n\n---\n\n### 2) DC equations (bias)\nAt node \\(V_{out}\\):\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}-\\frac{V_{out}}{R_1+R_2}\n\\]\n\nand\n\n\\[\nV_{GS}=V_F-V_{in}=\\beta V_{out}-V_{in}\n\\]\n\nFor saturation model (if used):\n\n\\[\nI_D \\approx \\frac{k_n}{2}(V_{GS}-V_T)^2(1+\\lambda V_{DS}),\\quad V_{DS}=V_{out}-V_{in}\n\\]\n\nThese equations give the operating point \\((I_D, V_{out})\\) for a given \\(V_{in}\\).\n\n---\n\n### 3) Small-signal gain\nUsing \\(g_m\\), \\(g_o=1/r_o\\), and \\(v_f=\\beta v_o\\), KCL at output gives:\n\n\\[\n\\left(\\frac{1}{R_D}+\\frac{1}{R_1+R_2}+g_o+\\beta g_m\\right)v_o\n=(g_m+g_o)v_{in}\n\\]\n\nHence:\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_{in}}\n=\\frac{g_m+g_o}{\n\\frac{1}{R_D}+\\frac{1}{R_1+R_2}+g_o+\\beta g_m\n}\n}\n\\]\n\nSo gain is **non-inverting** (\\(+\\)).\n\nIf \\(r_o\\to\\infty\\) and \\(R_1+R_2\\gg R_D\\):\n\n\\[\nA_v \\approx \\frac{g_mR_D}{1+\\beta g_mR_D}\n\\]\n\nIf loop gain is large \\((\\beta g_mR_D\\gg1)\\):\n\n\\[\n\\boxed{A_v \\approx \\frac{1}{\\beta}=1+\\frac{R_1}{R_2}}\n\\]\n\nSo resistor ratio sets gain (feedback-determined), transistor parameters matter less.\n\n---\n\n### 4) Interpretation\n- Negative feedback via \\(R_1,R_2\\) stabilizes/linearizes gain.\n- Output resistance is reduced by feedback.\n- This behaves like a transistor-based non-inverting amplifier with closed-loop gain near \\(1+R_1/R_2\\) when loop gain is high.\n\n---\n\nIf you want, I can also derive \\(R_{in}\\), \\(R_{out}\\), or solve a numerical example with given values.",
        "format": "markdown",
        "sha256": "c32f0b062f5cb7c17b2c5f34e77e3b6701a330b1b2bc4cb298ff162da3867d23"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative feedback. Its non-inverting gain expression and large-loop-gain limit are consistent with the circuit; the added finite-r_o refinement is also valid.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 10024,
        "total_tokens": 11623,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9356,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 10024,
        "total_tokens": 11623,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9356,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **NMOS** (as drawn with \\(R_D\\) to \\(V_{DD}\\)), this is a **common-gate stage with resistive voltage feedback** from output to gate.\n\n### 1) Feedback relation\nBecause gate current is ~0:\n\\[\nV_F=\\beta V_{out},\\qquad \\beta=\\frac{R_2}{R_1+R_2}\n\\]\n\nSo:\n\\[\nV_{GS}=V_F-V_{in}=\\beta V_{out}-V_{in}\n\\]\n\n---\n\n### 2) DC (large-signal) equations\nKCL at output node:\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}=I_D+\\frac{V_{out}}{R_1+R_2}\n\\]\n\nIf \\(M_1\\) is on and in saturation:\n\\[\nI_D=\\frac{k_n}{2}\\left(\\beta V_{out}-V_{in}-V_T\\right)^2(1+\\lambda(V_{out}-V_{in}))\n\\]\n\nSo the transfer \\(V_{out}(V_{in})\\) is found from:\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}-\\frac{V_{out}}{R_1+R_2}\n=\\frac{k_n}{2}\\left(\\beta V_{out}-V_{in}-V_T\\right)^2(1+\\lambda(V_{out}-V_{in}))\n\\]\n\n(If \\(M_1\\) is off, \\(I_D\\approx0\\), and \\(V_{out}\\) is set by \\(R_D\\) and \\(R_1+R_2\\).)\n\n---\n\n### 3) Small-signal gain\nIgnoring body effect, and using \\(g_m, g_{ds}\\):\n\\[\nA_v\\equiv \\frac{v_o}{v_{in}}\n=\\frac{g_m+g_{ds}}\n{\\frac1{R_D}+\\frac1{R_1+R_2}+\\beta g_m+g_{ds}}\n\\]\n\nIf \\(r_o\\to\\infty\\) (\\(g_{ds}\\to0\\)):\n\\[\nA_v \\approx \\frac{g_m}{\\frac1{R_D}+\\frac1{R_1+R_2}+\\beta g_m}\n\\]\n\nIf also \\(R_1+R_2\\gg R_D\\):\n\\[\nA_v \\approx \\frac{g_mR_D}{1+\\beta g_mR_D}\n\\]\n\nFor strong loop gain \\((\\beta g_mR_D\\gg1)\\):\n\\[\nA_v \\approx \\frac1\\beta = 1+\\frac{R_1}{R_2}\n\\]\nSo it behaves like a **non-inverting amplifier** with gain set mostly by resistor ratio.\n\n---\n\n### 4) Intuition\n- \\(V_{in}\\uparrow \\Rightarrow V_{GS}\\downarrow \\Rightarrow I_D\\downarrow \\Rightarrow\\) drop on \\(R_D\\downarrow \\Rightarrow V_{out}\\uparrow\\)  \n  \\(\\Rightarrow\\) **non-inverting** behavior.\n- If \\(V_{out}\\) rises, \\(V_F\\) rises, \\(I_D\\) rises, and \\(V_{out}\\) is pulled back down  \n  \\(\\Rightarrow\\) **negative feedback** (stabilizes gain, reduces sensitivity to device parameters).",
        "format": "markdown",
        "sha256": "f7ca4409b50a01ef10b3a11a4a799f19fc10da4f289ac6efb30dab1daac1d001"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input stage, output-divider feedback to the gate, and negative feedback. Its non-inverting gain expression is consistent with the feedback model, including finite output conductance.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1599,
        "output_tokens": 12444,
        "total_tokens": 14043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1599,
        "output_tokens": 12444,
        "total_tokens": 14043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an NMOS, gate current \\(\\approx 0\\), and \\(V_{DD}\\) is AC ground for small-signal analysis.\n\n### 1) Topology / intuition\nThis is a **common-gate amplifier** (input at source, output at drain) with **negative voltage feedback** from output to gate through \\(R_1,R_2\\).\n\nDefine:\n\\[\n\\alpha \\equiv \\frac{R_2}{R_1+R_2},\\qquad R_F \\equiv R_1+R_2\n\\]\nThen\n\\[\nV_F = \\alpha V_{out}.\n\\]\n\n---\n\n### 2) DC equations\nAt node \\(V_{out}\\):\n\\[\n\\frac{V_{DD}-V_{out}}{R_D} = I_D + \\frac{V_{out}}{R_F}.\n\\]\nSo\n\\[\nI_D = \\frac{V_{DD}-V_{out}}{R_D} - \\frac{V_{out}}{R_F}.\n\\]\n\nFor NMOS saturation (ignoring channel-length modulation):\n\\[\nI_D=\\frac{k_n}{2}\\left(V_{GS}-V_{TH}\\right)^2\n=\\frac{k_n}{2}\\left(\\alpha V_{out}-V_{in}-V_{TH}\\right)^2.\n\\]\nThis gives an implicit \\(V_{out}\\)-vs-\\(V_{in}\\) relation.\n\n---\n\n### 3) Small-signal gain \\(A_v=v_{out}/v_{in}\\)\nUsing \\(v_f=\\alpha v_o\\) and\n\\[\ni_d=g_m(v_f-v_i)+g_{ds}(v_o-v_i),\n\\]\nKCL at output:\n\\[\n\\frac{v_o}{R_D}+\\frac{v_o}{R_F}+i_d=0.\n\\]\n\nSo:\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\n=\\frac{g_m+g_{ds}}{\\frac1{R_D}+\\frac1{R_F}+\\alpha g_m+g_{ds}}\n}\n\\]\n\nIf \\(r_o\\to\\infty\\) (\\(g_{ds}\\to0\\)):\n\\[\n\\boxed{\nA_v=\\frac{g_m}{\\frac1{R_D}+\\frac1{R_F}+\\alpha g_m}\n=\\frac{g_mR_L}{1+\\alpha g_mR_L}\n}\n\\]\nwith \\(R_L=R_D\\parallel R_F\\).\n\n---\n\n### 4) High-loop-gain limit\nIf \\(\\alpha g_mR_L\\gg1\\),\n\\[\nA_v \\approx \\frac{1}{\\alpha}\n= \\frac{R_1+R_2}{R_2}\n=1+\\frac{R_1}{R_2}.\n\\]\nSo it behaves like a **non-inverting closed-loop amplifier** whose gain is mostly set by resistor ratio.\n\n---\n\nIf you want, I can also derive input/output resistances and show the feedback-loop interpretation (\\(A\\), \\(\\beta\\), loop gain \\(T\\)).",
        "format": "markdown",
        "sha256": "1eb74ac0808c2ce22d55f606669916fc4431147e05c2ba76be146db40a069ac5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback. Its small-signal gain and high-loop-gain limit agree with the solution.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 12374,
        "total_tokens": 13973,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 12374,
        "total_tokens": 13973,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the devices are **NMOS** (as drawn), this is a **source follower (common-drain) M1** biased by a **current sink M2**.\n\n### 1) DC operation\n- \\(M_2\\) (gate at \\(V_b\\)) sets a bias current:\n\\[\nI_{D2}\\approx \\frac{1}{2}\\beta_2(V_b-V_{TN2})^2\n\\quad (\\text{if }M_2\\text{ is in saturation})\n\\]\n- At node \\(V_{out}\\), KCL gives \\(I_{D1}=I_{D2}\\).\n- For \\(M_1\\) in saturation:\n\\[\nI_{D1}\\approx \\frac{1}{2}\\beta_1(V_{in}-V_{out}-V_{TN1})^2\n\\]\nSo:\n\\[\nV_{out}=V_{in}-V_{TN1}-\\sqrt{\\frac{\\beta_2}{\\beta_1}}(V_b-V_{TN2})\n\\]\n(neglecting \\(\\lambda\\), body effect).\n\nSo \\(V_{out}\\) follows \\(V_{in}\\) with ~unity slope and a nearly constant downward level shift (\\(\\approx V_{GS1}\\)).\n\n---\n\n### 2) Region conditions (for the above equation to hold)\n- \\(M_2\\) saturation: \\(\\;V_{out}\\ge V_{OV2}=V_b-V_{TN2}\\)\n- \\(M_1\\) saturation: \\(\\;V_{DD}-V_{out}\\ge V_{OV1}\\), where \\(V_{OV1}=V_{GS1}-V_{TN1}\\)\n\nIf \\(V_{in}\\) is very low, \\(M_1\\) turns off and \\(V_{out}\\) is pulled near 0 by \\(M_2\\).\n\n---\n\n### 3) Small-signal gain\nThis is a buffer-like stage:\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx\n\\frac{g_{m1}R_X}{1+(g_{m1}+g_{mb1})R_X},\n\\quad\nR_X=r_{o1}\\parallel r_{o2}\\parallel R_L\n\\]\nSo typically \\(A_v<1\\), but close to 1 if \\(g_{m1}R_X\\gg 1\\).\n\n- Input resistance \\(\\approx\\) very high (MOS gate).\n- Output resistance is low (source follower behavior), roughly\n\\[\nR_{out}\\approx \\frac{1}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}.\n\\]\n\n---\n\nSo, functionally: **a non-inverting voltage buffer/level shifter** with bias current set by \\(V_b\\).",
        "format": "markdown",
        "sha256": "580a3e8ffdaee576c580daa68ed351c34b2f1aabbb3f5115d81bfe9386a26abc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-sink load, and gives a positive gain below but potentially close to unity. The small-signal expression and output-resistance discussion are consistent with the topology.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 10952,
        "total_tokens": 12176,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10346,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 10952,
        "total_tokens": 12176,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10346,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **common-drain (source follower)** stage using:\n\n- \\(M_1\\): NMOS source follower (drain at \\(V_{DD}\\), gate at \\(V_{in}\\), source at \\(V_{out}\\))\n- \\(M_2\\): NMOS current sink biased by \\(V_b\\)\n\nSo \\(M_2\\) sets current, and \\(M_1\\) converts \\(V_{in}\\) to a buffered output.\n\n### 1) DC (large-signal) behavior\nAssume both MOSFETs are in saturation and ignore \\(\\lambda\\) first:\n\n\\[\nI_{D2}=\\frac{1}{2}\\beta_2 (V_b-V_{T2})^2 \\equiv I_B\n\\]\n\n\\[\nI_{D1}=\\frac{1}{2}\\beta_1 (V_{in}-V_{out}-V_{T1})^2\n\\]\n\nSince series current is same, \\(I_{D1}=I_{D2}=I_B\\), hence:\n\n\\[\nV_{out}=V_{in}-V_{GS1}\n\\]\nwith\n\\[\nV_{GS1}=V_{T1}+\\sqrt{\\frac{2I_B}{\\beta_1}}\n\\]\n\nSo \\(V_{out}\\) tracks \\(V_{in}\\) with roughly unity slope, shifted down by (approximately constant) \\(V_{GS1}\\).\n\n---\n\n### 2) Region/swing conditions\n- \\(M_2\\) saturation requires:\n\\[\nV_{out}\\ge V_{OV2}=V_b-V_{T2}\n\\]\nThis is the **low-end compliance limit**.\n\n- \\(M_1\\) saturation condition:\n\\[\nV_{DD}-V_{out}\\ge V_{in}-V_{out}-V_{T1}\n\\Rightarrow V_{in}\\le V_{DD}+V_{T1}\n\\]\nUsually true if \\(V_{in}\\le V_{DD}\\).\n\n- For very low \\(V_{in}\\), \\(M_1\\) turns off/weak and \\(V_{out}\\) is pulled near 0 by \\(M_2\\).\n\n---\n\n### 3) Small-signal gain\nAround bias point:\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx\n\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n<1\n\\]\n\nSo it is a **buffer** (non-inverting, gain close to 1), with high input resistance and relatively low output resistance.\n\n---\n\nIf you want, I can also write the **piecewise transfer curve** \\(V_{out}(V_{in})\\) including the low-\\(V_{in}\\) triode region of \\(M_2\\).",
        "format": "markdown",
        "sha256": "b0ec2f4377a690754e81dc31412f1c0e6d213b7c404380e4f855adedf10345a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as its current sink and gives a positive, near-unity gain below one, with body effect and output conductances included.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 7712,
        "total_tokens": 8936,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 7712,
        "total_tokens": 8936,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) and \\(M_2\\) are **NMOS** (as drawn), this is a **source follower (common-drain) stage** with a biased NMOS current sink load.\n\n### 1) DC operation (ideal square-law, \\(\\lambda=0\\), no body effect first)\n\nLet\n\\[\n\\beta_i=\\mu_n C_{ox}(W/L)_i,\\quad V_{OV2}=V_b-V_{T2}\n\\]\n\nIf \\(M_2\\) is ON and in saturation:\n\\[\nI_{D2}=\\frac{\\beta_2}{2}(V_b-V_{T2})^2=\\frac{\\beta_2}{2}V_{OV2}^2\n\\]\n\nAt node \\(V_{out}\\), \\(I_{D1}=I_{D2}\\).  \nFor \\(M_1\\) (with drain at \\(V_{DD}\\), source at \\(V_{out}\\)):\n\\[\nI_{D1}=\\frac{\\beta_1}{2}(V_{in}-V_{out}-V_{T1})^2\n\\]\n\nSo:\n\\[\nV_{out}=V_{in}-V_{T1}-\\sqrt{\\frac{\\beta_2}{\\beta_1}}(V_b-V_{T2})\n\\]\n\nSo \\(V_{out}\\) tracks \\(V_{in}\\) with ~unity slope, shifted down by an approximately constant level.\n\n---\n\n### 2) Region conditions\n\n- \\(M_2\\) saturation requires:\n  \\[\n  V_{out}\\ge V_{OV2}=V_b-V_{T2}\n  \\]\n- \\(M_1\\) saturation condition:\n  \\[\n  V_{DD}-V_{out}\\ge (V_{in}-V_{out}-V_{T1}) \\;\\Rightarrow\\; V_{DD}\\ge V_{in}-V_{T1}\n  \\]\n  usually true, so \\(M_1\\) is typically saturated when ON.\n\nIf \\(V_{in}\\) is too low, \\(M_1\\) turns off and \\(V_{out}\\to 0\\).  \nIf \\(V_{out}<V_{OV2}\\), \\(M_2\\) enters triode and transfer becomes nonlinear.\n\n---\n\n### 3) Small-signal gain (around bias point)\n\nThis is a source follower, so:\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\\approx\n\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n\\]\n(plus \\(g_L\\) if external load exists).\n\n- If \\(r_o\\) is large and body effect is small: \\(A_v\\approx 1\\).\n- With body effect, gain is a bit below 1.\n\n---\n\n### 4) Interpretation\n\n- **Function:** buffer/level shifter.\n- **Static current:** roughly fixed by \\(V_b\\) through \\(M_2\\).\n- **Power:** \\(P\\approx V_{DD}\\cdot I_{bias}\\).\n\nIf you want, I can also give the full piecewise \\(V_{out}(V_{in})\\) including \\(M_2\\)-triode region explicitly.",
        "format": "markdown",
        "sha256": "215e13df05a76117eedb701b63d9eba144ebaa959b3e9ad94ec9f9cdc2ae8792"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current-sink load, and gives a positive gain slightly below unity. Its small-signal expression correctly accounts for body effect and output conductances.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 9085,
        "total_tokens": 10309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8384,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 9085,
        "total_tokens": 10309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8384,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **CMOS inverter (NOT gate)**.\n\n- **\\(M_2\\)** (top) is a **PMOS pull-up** to \\(V_{DD}\\)  \n- **\\(M_1\\)** (bottom) is an **NMOS pull-down** to ground  \n- Their **gates are tied together** at \\(V_{in}\\), and their **drains are tied together** at \\(V_{out}\\)\n\n### Operation\n\n1. **\\(V_{in}=0\\) (low):**\n   - NMOS \\(M_1\\): OFF (\\(V_{GS1}=0\\))\n   - PMOS \\(M_2\\): ON (\\(V_{SG2}=V_{DD}\\))\n   - Output is pulled up: \\(\\boxed{V_{out}\\approx V_{DD}}\\)\n\n2. **\\(V_{in}=V_{DD}\\) (high):**\n   - NMOS \\(M_1\\): ON\n   - PMOS \\(M_2\\): OFF\n   - Output is pulled down: \\(\\boxed{V_{out}\\approx 0}\\)\n\nSo logic-wise: \\(\\boxed{V_{out}=\\overline{V_{in}}}\\).\n\n---\n\n### Transition region (\\(V_{in}\\) between low and high)\n\nBoth transistors conduct; \\(V_{out}\\) is set by current balance:\n\\[\nI_{Dn}(V_{in},V_{out}) = I_{Dp}(V_{in},V_{out})\n\\]\nThis gives the inverter VTC (voltage transfer curve), with a steep negative slope near the switching point.\n\nA common approximation for the switching threshold \\(V_M\\) (where \\(V_{in}=V_{out}\\)) is:\n\\[\n\\beta_n (V_M-V_{TN})^2=\\beta_p(V_{DD}-V_M-|V_{TP}|)^2\n\\]\n\\[\nV_M=\\frac{\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)+\\sqrt{\\beta_n}V_{TN}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n\\]\n\nIf devices are sized so \\(\\beta_n\\approx\\beta_p\\) and \\(|V_{TP}|\\approx V_{TN}\\), then \\(V_M\\approx V_{DD}/2\\).\n\n---\n\n### Key property\nIn steady logic states, ideally one device is OFF, so static power is near zero (except leakage).",
        "format": "markdown",
        "sha256": "55a099742af8f8f1fcff961848ac33f25de8a812333f881c53a1ccac5a3cc2e1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its PMOS pull-up and NMOS pull-down, and their connections and operation. The additional VTC and switching-threshold discussion is consistent with standard assumptions.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3182,
        "total_tokens": 3462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2659,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3182,
        "total_tokens": 3462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2659,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter (NOT gate)**:\n\n- \\(M_2\\): PMOS pull-up (source at \\(V_{DD}\\))\n- \\(M_1\\): NMOS pull-down (source at ground)\n- Gates tied together to \\(V_{in}\\)\n- Drains tied together at \\(V_{out}\\)\n\n### 1) Logic-level operation\n- **\\(V_{in}=0\\)**:  \n  \\(M_1\\) OFF, \\(M_2\\) ON \\(\\Rightarrow V_{out}\\approx V_{DD}\\) (logic 1)\n- **\\(V_{in}=V_{DD}\\)**:  \n  \\(M_2\\) OFF, \\(M_1\\) ON \\(\\Rightarrow V_{out}\\approx 0\\) (logic 0)\n\nSo the circuit inverts input logic.\n\n---\n\n### 2) DC transfer behavior (middle region)\nFor intermediate \\(V_{in}\\), both MOSFETs conduct and \\(V_{out}\\) is found from\n\\[\nI_{Dn}=I_{Dp}\n\\]\n(using magnitudes).\n\nUseful conditions:\n\n- NMOS ON if \\(V_{in}>V_{TN}\\)\n- PMOS ON if \\(V_{in}<V_{DD}-|V_{TP}|\\)\n\nAround the switching point, both are often in saturation:\n\\[\n\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{in}-|V_{TP}|)^2\n\\]\nAt \\(V_M\\) (where \\(V_{in}=V_{out}\\)):\n\\[\nV_M=\n\\frac{\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)+\\sqrt{\\beta_n}V_{TN}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n\\]\n\nIf devices are balanced (\\(\\beta_n\\approx\\beta_p,\\ |V_{TP}|\\approx V_{TN}\\)), then \\(V_M\\approx V_{DD}/2\\).\n\n---\n\n### 3) Key properties\n- **Rail-to-rail output** (\\(0\\) to \\(V_{DD}\\))\n- **Very low static power** ideally (one transistor OFF at logic 0/1)\n- **Current flows from \\(V_{DD}\\) to ground mainly during switching**\n- High gain near transition \\(\\Rightarrow\\) good noise margins\n\nSo this is the standard CMOS inverter with excellent digital switching characteristics.",
        "format": "markdown",
        "sha256": "106d17713326ad61bcffdfc6033c9e592925956c3600307bc3e32afe3426758a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down, PMOS pull-up, and logic-level operation. The additional transfer and switching-point analysis is consistent with the circuit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3382,
        "total_tokens": 3662,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2846,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3382,
        "total_tokens": 3662,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2846,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is **NMOS** (bottom) and \\(M_2\\) is **PMOS** (top), this is a standard **CMOS inverter**.\n\n### 1) Circuit function\n- Gates are tied together \\(\\to V_{in}\\)\n- Drains are tied together \\(\\to V_{out}\\)\n- \\(M_2\\) connects output to \\(V_{DD}\\) (pull-up)\n- \\(M_1\\) connects output to GND (pull-down)\n\nSo output is the logical NOT of input.\n\n---\n\n### 2) Large-signal operation\n\n#### \\(V_{in}\\) low (near 0)\n- NMOS \\(M_1\\): OFF (\\(V_{GS1}<V_{TN}\\))\n- PMOS \\(M_2\\): ON (\\(V_{SG2}>|V_{TP}|\\))\n- \\(V_{out} \\approx V_{DD}\\) (logic 1)\n\n#### \\(V_{in}\\) high (near \\(V_{DD}\\))\n- NMOS \\(M_1\\): ON\n- PMOS \\(M_2\\): OFF\n- \\(V_{out} \\approx 0\\) (logic 0)\n\n#### \\(V_{in}\\) in transition region\n- Both transistors conduct\n- \\(V_{out}\\) falls sharply from \\(V_{DD}\\) to 0\n- DC point found from current balance:\n\\[\nI_{Dn}(V_{in},V_{out})=I_{Dp}(V_{in},V_{out})\n\\]\n\n---\n\n### 3) Switching threshold (inverter trip point)\n\nAt \\(V_{in}=V_{out}=V_M\\), with long-channel square-law (both sat approx):\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{TP}|)^2\n\\]\n\\[\nV_M=\n\\frac{\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)+\\sqrt{\\beta_n}V_{TN}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n\\]\n\nIf devices are sized so \\(\\beta_n\\approx\\beta_p\\) and thresholds are similar, then \\(V_M\\approx V_{DD}/2\\).\n\n---\n\n### 4) Key properties\n- **Logic inversion**: low in \\(\\to\\) high out, high in \\(\\to\\) low out\n- **Rail-to-rail output** (approximately 0 and \\(V_{DD}\\))\n- **Very low static power** in steady logic states (ideal CMOS)\n- Power consumed mainly during switching (charging/discharging load capacitance)\n\nIf you want, I can also sketch the full VTC regions (cutoff/triode/sat of each device) with piecewise equations.",
        "format": "markdown",
        "sha256": "74954ea4583be4e845b8b91ac93266283edb872bc5e9094e151d45d76a12d075"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and describes its operation accurately. The additional switching-threshold analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3868,
        "total_tokens": 4148,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3252,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3868,
        "total_tokens": 4148,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3252,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is a **pMOS pull-up** (top, tied to \\(V_{DD}\\)) and \\(M_2\\) is an **nMOS pull-down** (bottom, tied to ground), this is a **CMOS inverter**.\n\n### 1) Logic operation\n- **\\(V_{in}=0\\)**  \n  - \\(M_1\\): ON (\\(V_{SG1}=V_{DD}\\))  \n  - \\(M_2\\): OFF (\\(V_{GS2}=0\\))  \n  - \\(\\Rightarrow V_{out}\\approx V_{DD}\\) (logic 1)\n\n- **\\(V_{in}=V_{DD}\\)**  \n  - \\(M_1\\): OFF (\\(V_{SG1}=0\\))  \n  - \\(M_2\\): ON (\\(V_{GS2}=V_{DD}\\))  \n  - \\(\\Rightarrow V_{out}\\approx 0\\) (logic 0)\n\nSo the circuit performs:\n\\[\nV_{out}=\\overline{V_{in}}\n\\]\n\n---\n\n### 2) Transition region (\\(V_{in}\\) between low and high)\nBoth transistors conduct; output is found from DC current balance:\n\\[\nI_{Dn}(V_{in},V_{out})=I_{Dp}(V_{in},V_{out})\n\\]\nThis gives the inverter VTC (voltage transfer curve), with a steep negative slope near the switching point.\n\nAt the switching threshold \\(V_M\\) (often near \\(V_{DD}/2\\)):\n\\[\n\\beta_n(V_M-V_{TN})^2=\\beta_p(V_{DD}-V_M-|V_{TP}|)^2\n\\]\n\\[\nV_M=\\frac{\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)+\\sqrt{\\beta_n}V_{TN}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n\\]\nIf \\(\\beta_n\\approx\\beta_p\\) and \\(V_{TN}\\approx |V_{TP}|\\), then \\(V_M\\approx V_{DD}/2\\).\n\n---\n\n### 3) Key properties\n- Rail-to-rail output (\\(\\approx 0\\) to \\(\\approx V_{DD}\\))\n- Very low static power at logic 0/1 (ideally zero, ignoring leakage)\n- Short-circuit current only during switching interval\n\nIf you want, I can also sketch the expected VTC shape and region-by-region device states (cutoff/triode/saturation).",
        "format": "markdown",
        "sha256": "cff54df0e41ccfd57e77f2ad2266729ecae1a9248840b43f36ffa09a7f34fc53"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer identifies M1 as pMOS and analyzes the circuit as an ordinary CMOS inverter. The golden solution requires recognizing that both devices are NMOS; this topology error earns 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 7001,
        "total_tokens": 7296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 7001,
        "total_tokens": 7296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **CMOS inverter (NOT gate)**.\n\nAssuming the top device \\(M_1\\) is PMOS (to \\(V_{DD}\\)) and the bottom device \\(M_2\\) is NMOS (to ground), with both gates tied to \\(V_{in}\\):\n\n### 1) Logic operation\n- **\\(V_{in}=0\\) (LOW):**  \n  \\(M_1\\) ON, \\(M_2\\) OFF \\(\\Rightarrow V_{out} \\approx V_{DD}\\) (HIGH)\n- **\\(V_{in}=V_{DD}\\) (HIGH):**  \n  \\(M_1\\) OFF, \\(M_2\\) ON \\(\\Rightarrow V_{out} \\approx 0\\) (LOW)\n\nSo it implements:\n\\[\nV_{out} = \\overline{V_{in}}\n\\]\n\n### 2) Transition region\nFor intermediate \\(V_{in}\\), both transistors conduct partially, and \\(V_{out}\\) is set by current balance:\n\\[\nI_{Dn} = I_{Dp}\n\\]\nAt the switching point \\(V_M\\) (where \\(V_{in}=V_{out}=V_M\\), long-channel model):\n\\[\n\\beta_n (V_M - V_{TN})^2\n=\n\\beta_p (V_{DD} - V_M - |V_{TP}|)^2\n\\]\n\\[\nV_M=\n\\frac{\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)+\\sqrt{\\beta_n}V_{TN}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n\\]\n\nIf devices are symmetric (\\(\\beta_n \\approx \\beta_p\\), \\(V_{TN}\\approx |V_{TP}|\\)), then \\(V_M \\approx V_{DD}/2\\).\n\n### 3) Power note\n- Ideally **almost zero static power** at logic 0 or 1.\n- Current mainly during switching (both briefly ON).",
        "format": "markdown",
        "sha256": "35fada1202bdd7efdfa21f1ad3eb556012e4ef3ca4262efdbcbd4b05ba8d81b6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer treats the circuit as a complementary CMOS inverter and identifies the upper device as PMOS. Both devices are NMOS, so this violates the golden solution’s non-negotiable device-identification rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 4806,
        "total_tokens": 5101,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4376,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 4806,
        "total_tokens": 5101,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4376,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is a PMOS (top, tied to \\(V_{DD}\\)) and \\(M_2\\) is an NMOS (bottom, tied to ground), this is a **CMOS inverter**.\n\n### 1) Logic behavior\n- \\(V_{in}=0\\):  \n  - PMOS \\(M_1\\): ON (\\(V_{SG1}=V_{DD}\\))  \n  - NMOS \\(M_2\\): OFF (\\(V_{GS2}=0\\))  \n  - \\(\\Rightarrow V_{out}\\approx V_{DD}\\) (logic 1)\n\n- \\(V_{in}=V_{DD}\\):  \n  - PMOS \\(M_1\\): OFF  \n  - NMOS \\(M_2\\): ON  \n  - \\(\\Rightarrow V_{out}\\approx 0\\) (logic 0)\n\nSo the circuit performs \\(V_{out}=\\overline{V_{in}}\\) (NOT gate).\n\n---\n\n### 2) Transition region (analog view)\nFor intermediate \\(V_{in}\\), both transistors conduct and \\(V_{out}\\) moves from \\(V_{DD}\\) to 0.  \nAt the switching point \\(V_M\\) (often where \\(V_{in}=V_{out}\\)), currents are equal:\n\n\\[\nI_{Dn}=I_{Dp}\n\\]\n\nIf both are in saturation (long-channel model):\n\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{TP}|)^2\n\\]\n\n\\[\nV_M=\n\\frac{\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)+\\sqrt{\\beta_n}V_{TN}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n\\]\n\nIf devices are “balanced” (\\(\\beta_n\\approx\\beta_p\\), \\(V_{TN}\\approx |V_{TP}|\\)), then \\(V_M\\approx V_{DD}/2\\).\n\n---\n\n### 3) Key property\n- **Static power is very low** at logic 0/1 (ideally no DC current path).\n- Current mainly flows during switching (both partially ON).\n\nIf you want, I can also sketch the full \\(V_{out}\\) vs \\(V_{in}\\) transfer curve with transistor operating regions (cutoff/triode/saturation) piecewise.",
        "format": "markdown",
        "sha256": "de988a0951504d385599ac35b22fa9919cd4347b51527d6ae403fc9731d8b824"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as an ordinary CMOS inverter; both devices are NMOS, so the golden solution requires a score of 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 4198,
        "total_tokens": 4493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3673,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 4198,
        "total_tokens": 4493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3673,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the devices are as drawn in the usual way (**\\(M_1\\): NMOS**, **\\(M_2\\): PMOS with gate tied to drain**), this is a:\n\n- **common-source NMOS stage**\n- with a **diode-connected PMOS active load**.\n\nSo it behaves like an **inverting stage**.\n\n---\n\n### 1) DC operation (large-signal)\n\nLet  \n\\[\n\\beta_n=\\mu_n C_{ox}(W/L)_1,\\qquad \\beta_p=\\mu_p C_{ox}(W/L)_2\n\\]\n\nAt node \\(V_{out}\\), KCL gives:\n\\[\nI_{D1}=I_{D2}\n\\]\n\n#### \\(M_2\\) (PMOS load)\nBecause gate and drain are shorted, when on it is always in saturation:\n\\[\nI_{D2}=\\frac{\\beta_p}{2}\\left(V_{DD}-V_{out}-|V_{TP}|\\right)^2\n\\]\n\n#### \\(M_1\\) (NMOS driver)\n- cutoff if \\(V_{in}\\le V_{TN}\\)\n- saturation if \\(V_{out}\\ge V_{in}-V_{TN}\\):\n  \\[\n  I_{D1}=\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n  \\]\n- triode if \\(V_{out}<V_{in}-V_{TN}\\):\n  \\[\n  I_{D1}=\\beta_n\\!\\left[(V_{in}-V_{TN})V_{out}-\\frac{V_{out}^2}{2}\\right]\n  \\]\n\nSo:\n\n### Region A: \\(M_1\\) saturation\n\\[\n\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{out}-|V_{TP}|)^2\n\\]\n\\[\n\\Rightarrow\nV_{out}=V_{DD}-|V_{TP}|-\\sqrt{\\frac{\\beta_n}{\\beta_p}}(V_{in}-V_{TN})\n\\]\n\nBoundary to triode occurs at \\(V_{out}=V_{in}-V_{TN}\\), giving\n\\[\nV_{in,b}=V_{TN}+\\frac{V_{DD}-|V_{TP}|}{1+\\sqrt{\\beta_n/\\beta_p}}\n\\]\n\n### Region B: \\(M_1\\) triode\n\\[\n\\beta_n\\!\\left[(V_{in}-V_{TN})V_{out}-\\frac{V_{out}^2}{2}\\right]\n=\n\\frac{\\beta_p}{2}(V_{DD}-|V_{TP}|-V_{out})^2\n\\]\n(implicit quadratic in \\(V_{out}\\)).\n\n---\n\n### 2) Small-signal gain around a bias point\n\nFor AC (with \\(V_{DD}\\) as AC ground), diode-connected \\(M_2\\) looks like a conductance \\((g_{m2}+g_{o2})\\) to ground.\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n\\approx\n-\\frac{g_{m1}}{g_{m2}+g_{o1}+g_{o2}}\n\\]\nIf \\(r_o\\) is large:\n\\[\nA_v \\approx -\\frac{g_{m1}}{g_{m2}}\n\\]\n\n---\n\n### 3) Key conclusions\n\n- It is an **inverting** stage.\n- \\(M_2\\) is an **active load** (not a linear resistor).\n- Unlike ideal CMOS inverter, this topology has **static current** when both transistors conduct:\n  \\[\n  P_{static}=V_{DD}I_D\n  \\]\n- Often used as a simple gain stage / ratioed inverter style load.",
        "format": "markdown",
        "sha256": "debb6cb006d8cb70858cf918746bbc6d67aaf8ca398819de53b07fd0d3271fcd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with channel-length modulation included consistently for both devices, plus the expected gm1/gm2 approximation.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 13298,
        "total_tokens": 14018,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12465,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 13298,
        "total_tokens": 14018,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12465,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming long-channel MOSFETs, no body effect, and \\(\\lambda \\approx 0\\):\n\n- \\(M_1\\): NMOS pull-down (\\(S\\) at ground, \\(G=V_{in}\\), \\(D=V_{out}\\))\n- \\(M_2\\): PMOS diode-connected load (\\(S=V_{DD}\\), \\(G=D=V_{out}\\))\n\nSo this is a **common-source inverter-like stage with active (diode) PMOS load**.\n\n---\n\n### 1) Currents\n\n\\[\nI_{D2}=\\frac{\\beta_p}{2}\\left(V_{DD}-V_{out}-|V_{TP}|\\right)^2\n\\quad (\\text{when }V_{DD}-V_{out}>|V_{TP}|)\n\\]\n(\\(M_2\\) is always in saturation when on, because \\(G=D\\).)\n\nFor \\(M_1\\):\n- Cutoff: \\(V_{in}\\le V_{TN}\\), \\(I_{D1}=0\\)\n- Saturation: \\(V_{out}\\ge V_{in}-V_{TN}\\),\n  \\[\n  I_{D1}=\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n  \\]\n- Triode: \\(V_{out}<V_{in}-V_{TN}\\),\n  \\[\n  I_{D1}=\\beta_n\\!\\left[(V_{in}-V_{TN})V_{out}-\\frac{V_{out}^2}{2}\\right]\n  \\]\n\nAt DC: \\(I_{D1}=I_{D2}\\).\n\n---\n\n### 2) Transfer characteristic \\(V_{out}(V_{in})\\)\n\nDefine \\(V_X=V_{DD}-|V_{TP}|\\), \\(\\alpha=\\sqrt{\\beta_n/\\beta_p}\\).\n\n#### Region A: \\(M_1\\) off\n\\[\nV_{in}\\le V_{TN}\\;\\Rightarrow\\;V_{out}\\approx V_{DD}\n\\]\n\n#### Region B: both on, \\(M_1\\) in saturation\n\\[\n\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_X-V_{out})^2\n\\]\n\\[\n\\Rightarrow\\boxed{V_{out}=V_X-\\alpha(V_{in}-V_{TN})}\n\\]\nValidity condition (\\(M_1\\) sat):\n\\[\nV_{out}\\ge V_{in}-V_{TN}\n\\Rightarrow\nV_{in}\\le V_{TN}+\\frac{V_X}{1+\\alpha}\n\\]\n\n#### Region C: \\(M_1\\) triode\n\\[\n\\beta_n\\!\\left[(V_{in}-V_{TN})V_{out}-\\frac{V_{out}^2}{2}\\right]\n=\n\\frac{\\beta_p}{2}(V_X-V_{out})^2\n\\]\n(quadratic in \\(V_{out}\\); use the physically lower root).\n\n---\n\n### 3) Key behavior\n\n- It is an **inverting** stage.\n- \\(M_2\\) acts as a nonlinear pull-up “resistor.”\n- For \\(V_{in}>V_{TN}\\), there is static current (\\(P_{DC}=V_{DD}I_D\\)).\n- Small-signal gain in Region B:\n  \\[\n  A_v \\approx -\\frac{g_{m1}}{g_{m2}+g_{o1}+g_{o2}}\n  \\approx -\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n  \\quad (\\lambda\\to0)\n  \\]\n\nIf you want, I can also plot/sketch the VTC shape and mark the region boundaries numerically for chosen device parameters.",
        "format": "markdown",
        "sha256": "98ef135a8b48ce2a0199a8a614173b668692c363f5060e36c1feb140daf56b1e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including both devices' output conductances; the additional large-signal analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 8252,
        "total_tokens": 8972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7426,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 8252,
        "total_tokens": 8972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7426,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS common-source stage with a diode-connected PMOS load** (often called a diode-load inverter / active-load inverter).\n\nAssume long-channel MOS, body tied to source, and \\(\\lambda \\approx 0\\).\n\nLet  \n\\[\n\\beta_n=\\mu_n C_{ox}\\left(\\frac WL\\right)_1,\\quad\n\\beta_p=\\mu_p C_{ox}\\left(\\frac WL\\right)_2,\n\\]\n\\[\nA = V_{DD}-|V_{TP}|,\\quad B=V_{in}-V_{TN}.\n\\]\n\nAt DC, KCL at \\(V_{out}\\):  \n\\[\nI_{D1}=I_{D2}.\n\\]\n\n---\n\n### 1) Device regions\n\n- \\(M_2\\) (PMOS, gate tied to drain) is **always in saturation when ON**.\n- \\(M_1\\) can be OFF / SAT / TRI depending on \\(V_{in},V_{out}\\).\n\n\\[\nI_{D2}=\n\\begin{cases}\n\\frac{\\beta_p}{2}(V_{DD}-V_{out}-|V_{TP}|)^2 = \\frac{\\beta_p}{2}(A-V_{out})^2,& V_{out}\\le A\\\\\n0,& V_{out}>A\n\\end{cases}\n\\]\n\n\\[\nI_{D1}=\n\\begin{cases}\n0,& V_{in}\\le V_{TN}\\\\[2mm]\n\\frac{\\beta_n}{2}B^2,& \\text{if }V_{out}\\ge B \\;(\\text{sat})\\\\[2mm]\n\\beta_n\\!\\left(BV_{out}-\\frac{V_{out}^2}{2}\\right),& \\text{if }V_{out}<B \\;(\\text{triode})\n\\end{cases}\n\\]\n\n---\n\n### 2) Transfer characteristic \\(V_{out}(V_{in})\\)\n\n#### (a) \\(V_{in}\\le V_{TN}\\): \\(M_1\\) OFF\nOutput is pulled up by \\(M_2\\) until \\(M_2\\) nearly turns off; practically \\(V_{OH}\\approx A=V_{DD}-|V_{TP}|\\) (ideal model allows any \\(V_{out}\\ge A\\) if both off).\n\n#### (b) \\(M_1\\) SAT, \\(M_2\\) SAT\n\\[\n\\frac{\\beta_n}{2}B^2=\\frac{\\beta_p}{2}(A-V_{out})^2\n\\Rightarrow\nV_{out}=A-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,B.\n\\]\nValid while \\(V_{out}\\ge B\\), i.e.\n\\[\nB\\le \\frac{A}{1+\\sqrt{\\beta_n/\\beta_p}}.\n\\]\n\n#### (c) \\(M_1\\) TRI, \\(M_2\\) SAT\n\\[\n\\beta_n\\!\\left(BV_{out}-\\frac{V_{out}^2}{2}\\right)=\\frac{\\beta_p}{2}(A-V_{out})^2\n\\]\n\\[\n(\\beta_n+\\beta_p)V_{out}^2-2(\\beta_pA+\\beta_nB)V_{out}+\\beta_pA^2=0\n\\]\n(use the smaller root for physical \\(V_{out}\\)).\n\n---\n\n### 3) Key conclusions\n\n- It is **not a full CMOS inverter** (ratioed behavior).\n- \\(V_{OH}\\) is degraded (roughly \\(V_{DD}-|V_{TP}|\\) in ideal switching from low).\n- \\(V_{OL}\\) is finite unless \\(M_1\\) is very strong.\n- There is **static current** when input is high \\(\\Rightarrow\\) static power dissipation.\n- Small-signal gain around bias:\n\\[\nA_v \\approx -\\frac{g_{m1}}{g_{m2}+g_{o1}+g_{o2}}\n\\approx -\\frac{g_{m1}}{g_{m2}} \\quad (\\text{if }r_o\\text{ large}).\n\\]\n\nIf you want, I can also plot the full \\(V_{TC}\\) for specific \\(V_{DD},V_T,\\beta\\) values.",
        "format": "markdown",
        "sha256": "3d27f87f3e58616f8ee93eb5aca7afcb8caa815bd46d4b2d87c740e68ca0b57f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS common-source stage with a diode-connected PMOS load and gives the inverting gain, including a consistent channel-length-modulation form.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 10563,
        "total_tokens": 11283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9629,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 10563,
        "total_tokens": 11283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9629,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the symbols are **pMOS** (arrow toward gate/body) with source at the upper terminal:\n\n- \\(M_2\\): source at \\(V_{DD}\\), gate at \\(V_{in}\\), drain at \\(V_{out}\\)  \\(\\rightarrow\\) input-controlled pull-up.\n- \\(M_1\\): source at \\(V_{out}\\), **gate and drain at ground**  \\(\\rightarrow\\) diode-connected pMOS load to ground.\n\nSo this is a **ratioed inverting stage** (active-load inverter / amplifier).\n\n---\n\nLet \\(V_{T1}=|V_{TP1}|\\), \\(V_{T2}=|V_{TP2}|\\), and \\(\\beta_i=\\mu_p C_{ox}(W/L)_i\\).\n\n### 1) Device equations\n\n\\[\nV_{SG2}=V_{DD}-V_{in},\\quad V_{SD2}=V_{DD}-V_{out}\n\\]\n\\[\nV_{SG1}=V_{out},\\quad V_{SD1}=V_{out}\n\\]\n\n#### \\(M_1\\) (diode-connected pMOS)\nIf \\(V_{out}>V_{T1}\\), it is ON and in saturation:\n\\[\nI_1=\\frac{\\beta_1}{2}(V_{out}-V_{T1})^2\n\\]\nElse \\(I_1\\approx 0\\).\n\n#### \\(M_2\\)\n- OFF if \\(V_{in}\\ge V_{DD}-V_{T2}\\).\n- ON otherwise.\n\nIf ON:\n- **Saturation** (\\(V_{out}\\le V_{in}+V_{T2}\\)):\n\\[\nI_2=\\frac{\\beta_2}{2}(V_{DD}-V_{in}-V_{T2})^2\n\\]\n- **Triode** (\\(V_{out}>V_{in}+V_{T2}\\)):\n\\[\nI_2=\\beta_2\\!\\left[(V_{DD}-V_{in}-V_{T2})(V_{DD}-V_{out})-\\frac{(V_{DD}-V_{out})^2}{2}\\right]\n\\]\n\nAt DC, solve \\(I_1=I_2\\).\n\n---\n\n### 2) Transfer behavior \\(V_{out}(V_{in})\\)\n\n- For high \\(V_{in}\\): \\(M_2\\) turns OFF, output is pulled down by \\(M_1\\) (ideal square-law gives \\(\\sim V_{T1}\\); practical leakage/subthreshold can bring it closer to 0).\n- For moderate \\(V_{in}\\) where \\(M_2\\) is in saturation:\n\\[\nV_{out}=V_{T1}+\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_{DD}-V_{in}-V_{T2})\n\\]\n(negative slope, inverting).\n- For low \\(V_{in}\\): \\(M_2\\) enters triode; \\(V_{out}\\) follows from the quadratic \\(I_1=I_2\\), approaching a high value below \\(V_{DD}\\).\n\nSo the stage is **inverting**, with **non-rail-to-rail** swing and **static current** when both transistors conduct.\n\n---\n\nIf you want, I can also plot/derive the full piecewise \\(V_{TC}\\) for the matched case \\((\\beta_1=\\beta_2,\\ V_{T1}=V_{T2})\\), and give the switching threshold explicitly.",
        "format": "markdown",
        "sha256": "4b8ef452a555eede8f97ba095ef4f49c5ab4201d72590429c676fcde755570a3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the input device, and M1 as a diode-connected PMOS load with gate and drain grounded. Its current-balance equations and resulting inverting transfer provide the required equivalent gm/gm explanation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 16093,
        "total_tokens": 17771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15334,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 16093,
        "total_tokens": 17771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15334,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the arrows indicate **pMOS** devices (so \\(M_2\\) is a pMOS pull-up controlled by \\(V_{in}\\), and \\(M_1\\) is a **diode-connected pMOS** pull-down to ground), the circuit is a **ratioed inverting stage**.\n\n### 1) Device voltages\nFor \\(M_2\\):\n\\[\nV_{SG2}=V_{DD}-V_{in},\\qquad V_{SD2}=V_{DD}-V_{out}\n\\]\nSo \\(M_2\\) is ON if\n\\[\nV_{in}<V_{DD}-|V_{TP2}|\n\\]\n\nFor \\(M_1\\) (gate and drain at 0, source at \\(V_{out}\\)):\n\\[\nV_{SG1}=V_{out},\\qquad V_{SD1}=V_{out}\n\\]\nSo \\(M_1\\) is ON if\n\\[\nV_{out}>|V_{TP1}|\n\\]\nand when ON it is always in saturation (diode-connected MOSFET behavior).\n\n---\n\n### 2) DC current equations (long-channel, no CLM)\n\\[\nI_{D1}=\\frac{\\beta_1}{2}(V_{out}-|V_{TP1}|)^2\n\\]\n\\[\nI_{D2,\\text{sat}}=\\frac{\\beta_2}{2}(V_{DD}-V_{in}-|V_{TP2}|)^2\n\\]\n\\[\nI_{D2,\\text{tri}}=\\beta_2\\!\\left[(V_{DD}-V_{in}-|V_{TP2}|)(V_{DD}-V_{out})-\\frac{(V_{DD}-V_{out})^2}{2}\\right]\n\\]\n\nAt DC:\n\\[\nI_{D2}=I_{D1}\n\\]\n\n---\n\n### 3) Useful closed form (when both are in saturation)\nIf \\(M_2\\) is also in saturation (\\(V_{out}\\le V_{in}+|V_{TP2}|\\)):\n\\[\n\\boxed{V_{out}=|V_{TP1}|+\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_{DD}-V_{in}-|V_{TP2}|)}\n\\]\nSo \\(V_{out}\\) decreases as \\(V_{in}\\) increases (inverting behavior).\n\nFor lower \\(V_{in}\\), \\(M_2\\) moves to triode and \\(V_{out}\\) is found from the quadratic \\(I_{D2,\\text{tri}}=I_{D1}\\).\n\n---\n\n### 4) Endpoint behavior\n- **High \\(V_{in}\\)** (\\(M_2\\) off): output is pulled down by \\(M_1\\) until about\n  \\[\n  V_{out}\\approx |V_{TP1}|\n  \\]\n  (not rail-to-rail 0 V ideally).\n- **Low \\(V_{in}\\)**: \\(M_2\\) strongly on, output rises, but \\(M_1\\) also conducts, so \\(V_{OH}<V_{DD}\\) unless \\(\\beta_2\\gg\\beta_1\\).\n\n---\n\n### 5) Key takeaway\nThis is an **inverting, ratio-dependent pMOS stage** with **static current** whenever both transistors conduct; unlike CMOS inverter, it is generally **not full-swing** unless sized aggressively.\n\n---\n\nIf you want, I can also derive the exact piecewise \\(V_{out}(V_{in})\\) curve for matched devices (\\(\\beta_1=\\beta_2\\), \\(|V_{TP1}|=|V_{TP2}|\\)) or include channel-length modulation.",
        "format": "markdown",
        "sha256": "77cf94dfbe805ba5c38ffb9a6e864c3a082002a4a3d2e9404aaad51ded56a8e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the input-controlled device, and M1 as a diode-connected PMOS load with gate and drain at ground. The explicit DC current-balance equations and resulting inverting, ratio-dependent behavior satisfy the equivalent current-balance route to full credit.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1678,
        "output_tokens": 17936,
        "total_tokens": 19614,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17132,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1678,
        "output_tokens": 17936,
        "total_tokens": 19614,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17132,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the symbol convention in your figure (both transistors are **pMOS**):\n\n- \\(M_2\\): source at \\(V_{DD}\\), gate at \\(V_{in}\\), drain at \\(V_{out}\\)  \n- \\(M_1\\): source at \\(V_{out}\\), and **gate and drain tied to ground** \\(\\Rightarrow\\) diode-connected pMOS load\n\nSo this is a **ratioed pMOS inverter / active-load stage**.\n\n---\n\n### 1) Device equations (long-channel, no \\(\\lambda\\), magnitudes)\n\nLet \\(\\beta_i=\\mu_p C_{ox}(W/L)_i\\), \\(V_{Ti}=|V_{TPi}|\\).\n\nFor \\(M_1\\) (diode-connected):\n\\[\nV_{SG1}=V_{SD1}=V_{out}\n\\]\nIf \\(V_{out}>V_{T1}\\), \\(M_1\\) is ON and always in saturation:\n\\[\nI_1=\\frac{\\beta_1}{2}(V_{out}-V_{T1})^2\n\\]\nElse \\(I_1\\approx0\\).\n\nFor \\(M_2\\):\n\\[\nV_{SG2}=V_{DD}-V_{in},\\quad V_{SD2}=V_{DD}-V_{out}\n\\]\nON condition:\n\\[\nV_{in}<V_{DD}-V_{T2}\n\\]\n- Saturation if \\(V_{out}\\le V_{in}+V_{T2}\\):\n\\[\nI_2=\\frac{\\beta_2}{2}(V_{DD}-V_{in}-V_{T2})^2\n\\]\n- Triode if \\(V_{out}>V_{in}+V_{T2}\\):\n\\[\nI_2=\\beta_2\\!\\left[(V_{DD}-V_{in}-V_{T2})(V_{DD}-V_{out})-\\frac{(V_{DD}-V_{out})^2}{2}\\right]\n\\]\n\nDC operating point comes from:\n\\[\nI_2=I_1\n\\]\n\n---\n\n### 2) Qualitative behavior\n\n- **\\(V_{in}\\) high** \\((\\gtrsim V_{DD}-V_{T2})\\): \\(M_2\\) OFF, \\(M_1\\) discharges output \\(\\to\\) LOW.\n- **\\(V_{in}\\) low**: \\(M_2\\) ON and pulls up, \\(M_1\\) pulls down; output settles where currents match.\n\nSo it is **inverting** (\\(V_{out}\\) decreases when \\(V_{in}\\) increases), but unlike CMOS inverter:\n- not rail-to-rail ideally,\n- has static current when both are ON.\n\n---\n\n### 3) In saturation region of \\(M_2\\), explicit \\(V_{out}(V_{in})\\)\n\nFrom \\(I_2=I_1\\):\n\\[\nV_{out}=V_{T1}+\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_{DD}-V_{in}-V_{T2})\n\\]\n(valid only while \\(V_{out}\\le V_{in}+V_{T2}\\)).\n\n---\n\nIf you want, I can also plot the full VTC (piecewise) for given \\(\\beta_1,\\beta_2,V_{T1},V_{T2},V_{DD}\\).",
        "format": "markdown",
        "sha256": "15d8100d862aa8490f1f0d21099c7768cd04ad61477494168467b104cc4b88cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, M2 as the common-source input device, and M1 as a diode-connected PMOS load to ground. Its current-balance equations and resulting transfer relation provide the required equivalent explanation; the low-output wording does not replace the correct topology.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1678,
        "output_tokens": 16984,
        "total_tokens": 18662,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16244,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1678,
        "output_tokens": 16984,
        "total_tokens": 18662,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16244,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming ideal bias sources (\\(V_{b1},V_{b2}\\) are AC grounds), and neglecting body effect unless stated:\n\n- \\(M_2\\): source and gate are both at AC ground \\(\\Rightarrow\\) its \\(g_m\\) does not contribute; it appears as \\(r_{o2}\\) from node \\(X\\) to ground.\n- \\(M_1\\): common-gate device with \\(g_{m1}\\), \\(r_{o1}\\), source at node \\(X\\), drain at output.\n\nApplying a test voltage \\(v_t\\) at the output and solving nodal KCL gives\n\n\\[\nR_{out}=\\frac{v_t}{i_t}\n=\\frac{g_{m1}+g_{ds1}+g_{ds2}}{g_{ds1}g_{ds2}}\n= r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}.\n\\]\n\nSo,\n\n\\[\n\\boxed{R_{out}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nand for \\(g_{m1}r_{o1}\\gg1\\),\n\n\\[\n\\boxed{R_{out}\\approx g_{m1}r_{o1}r_{o2}.}\n\\]\n\n(If body effect is included for \\(M_1\\), replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).)",
        "format": "markdown",
        "sha256": "44cab6cc9fa283bb1afaf9f71a08e09dc6d9d6823137a0942fa664b1ffc209a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate cascode device and gives the full output-resistance expression and approximation. Body effect is appropriately optional.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2669,
        "output_tokens": 6595,
        "total_tokens": 9264,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6262,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2669,
        "output_tokens": 6595,
        "total_tokens": 9264,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6262,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) as AC ground, and apply a test voltage \\(v_o\\) at the output node.\n\nFor this PMOS stack, the upper device \\(M_2\\) has fixed \\(v_{sg2}\\), so its \\(g_m\\) term does not contribute (only \\(r_{o2}\\) does).  \nWriting KCL at node \\(X\\):\n\n\\[\n\\frac{v_x}{r_{o2}}+\\frac{v_x-v_o}{r_{o1}}+g_{m1}v_x=0\n\\]\n\n\\[\nv_x=\\frac{(1/r_{o1})}{g_{m1}+1/r_{o1}+1/r_{o2}}\\,v_o\n\\]\n\nOutput test current:\n\n\\[\ni_o=\\frac{v_o-v_x}{r_{o1}}-g_{m1}v_x\n\\]\n\nwhich simplifies to:\n\n\\[\ni_o=\\frac{(1/r_{o1})(1/r_{o2})}{g_{m1}+1/r_{o1}+1/r_{o2}}\\,v_o\n\\]\n\nHence,\n\n\\[\n\\boxed{R_{out}=\\frac{v_o}{i_o}\n= r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nand if \\(g_{m1}r_o\\gg1\\),\n\n\\[\n\\boxed{R_{out}\\approx g_{m1}r_{o1}r_{o2}}\n\\]\n\n(If body effect is included, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).)",
        "format": "markdown",
        "sha256": "3177c767ff4634166ed9b2cb97349666a679374dbfce11510ee3dbcf86011d1b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly treats the stack as PMOS, uses M1 as the cascode device, and gives the correct Rout expression and approximation. The optional body-effect adjustment is also correct.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2669,
        "output_tokens": 7867,
        "total_tokens": 10536,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7488,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2669,
        "output_tokens": 7867,
        "total_tokens": 10536,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7488,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming small-signal analysis with \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) as AC ground (ideal bias sources), this is a **PMOS cascode stack** and the resistance seen at the bottom node is:\n\n\\[\nR_{\\text{out}}\n= \\frac{g_{m1}+g_{ds1}+g_{ds2}}{g_{ds1}g_{ds2}}\n= r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\n\\]\n\nSo the usual high-gain approximation is:\n\n\\[\n\\boxed{R_{\\text{out}} \\approx g_{m1}r_{o1}r_{o2}}\n\\quad \\text{if } g_{m1}r_{o1},\\, g_{m1}r_{o2} \\gg 1\n\\]\n\n(If body effect is included for \\(M_1\\), replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).)",
        "format": "markdown",
        "sha256": "329d29fa39dcb65b09fa3b5a14a7f81ab2b38fbd368de06a553e044c22b6580f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode and M1 as the cascode device, and gives the correct output-resistance expression and approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2669,
        "output_tokens": 9010,
        "total_tokens": 11679,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8775,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2669,
        "output_tokens": 9010,
        "total_tokens": 11679,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8775,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_2\\) is the **upper PMOS** (source at \\(V_{DD}\\), drain at node \\(X\\)):\n\n\\[\n\\text{Saturation condition: } V_{SD2} \\ge V_{SG2}-|V_{TP}|\n\\]\n\nHere,\n\\[\nV_{SD2}=V_{DD}-V_X,\\qquad V_{SG2}=V_{DD}-V_{b2}\n\\]\n\nSo:\n\\[\nV_{DD}-V_X \\ge (V_{DD}-V_{b2})-|V_{TP}|\n\\;\\Rightarrow\\;\nV_X \\le V_{b2}+|V_{TP}|\n\\]\n\nEquivalent form:\n\\[\nV_{SD2} \\ge V_{OV2}\n\\quad\\Rightarrow\\quad\nV_X \\le V_{DD}-V_{OV2}\n\\]\n\n✅ So to ensure \\(M_2\\) stays in saturation, keep node \\(X\\) low enough (at least one overdrive below \\(V_{DD}\\)) by proper biasing of \\(V_{b2}\\) (and \\(V_{b1}\\), which influences \\(X\\)).",
        "format": "markdown",
        "sha256": "e1c3028275ea54771f51a4475623a841944e88773971c93e4c5f8e3396a4e128"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The PMOS saturation inequality is correct, but the answer treats biasing Vb2 as the way to control X and does not relate VX to Vb1, the key condition needed to ensure M2 remains in saturation.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 6987,
        "total_tokens": 9552,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 6987,
        "total_tokens": 9552,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat \\(M_2\\) as the **top PMOS** (source at \\(V_{DD}\\), drain at node \\(X\\), gate at \\(V_{b2}\\)).\n\nFor a PMOS to be in saturation:\n\n\\[\nV_{SD2} \\ge V_{SG2} - |V_{TP2}|\n\\]\n\nSo here:\n\n\\[\nV_{DD}-V_X \\ge (V_{DD}-V_{b2})-|V_{TP2}|\n\\]\n\n\\[\n\\Rightarrow\\quad V_X \\le V_{b2}+|V_{TP2}|\n\\]\n\nSo the design rule is:\n\n- keep enough voltage drop across \\(M_2\\): \\(V_{DD}-V_X \\ge V_{OV2}\\),\n- choose \\(V_{b2}\\) (and device sizing/current) so this holds in worst-case PVT with some margin.\n\nAlso ensure it is turned on: \\(V_{SG2}=V_{DD}-V_{b2} > |V_{TP2}|\\).",
        "format": "markdown",
        "sha256": "725c9328e3cc6257987e3d64e29c0d5491ee0f423b2171f533ff10eb073f5283"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The PMOS saturation inequality is correct, but the answer treats Vb2 as the control and misses that VX is set mainly by Vb1, which gives the relevant condition on Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2565,
        "output_tokens": 5829,
        "total_tokens": 8394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5602,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2565,
        "output_tokens": 5829,
        "total_tokens": 8394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5602,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_2\\) is the **upper PMOS** (source at \\(V_{DD}\\), drain at node \\(X\\)):\n\nTo keep it in saturation, enforce the PMOS sat condition:\n\n\\[\nV_{SD2} \\ge V_{SG2} - |V_{TP}|\n\\]\n\nHere,\n\n\\[\nV_{SD2}=V_{DD}-V_X,\\qquad V_{SG2}=V_{DD}-V_{b2}\n\\]\n\nSo:\n\n\\[\nV_{DD}-V_X \\ge (V_{DD}-V_{b2})-|V_{TP}|\n\\;\\Rightarrow\\;\nV_X \\le V_{b2}+|V_{TP}|\n\\]\n\n### Practical interpretation\n- Keep enough voltage across \\(M_2\\):  \n  \\[\n  V_{DD}-V_X \\ge V_{OV2}\n  \\]\n  (at least one overdrive across \\(M_2\\)).\n- Choose \\(V_{b2}\\) (and \\(V_X\\), via \\(M_1\\) bias) so this holds with margin over PVT.\n\nSo the short answer: **ensure node \\(X\\) stays low enough (relative to \\(V_{b2}\\)) so that \\(M_2\\) has at least \\(V_{OV2}\\) across \\(S\\)-\\(D\\).**",
        "format": "markdown",
        "sha256": "42b69155c5e27b1b61ff005786542ba6d29efccc1d9903e000e2e23dcfa0b0a3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M2 as a PMOS and states its saturation condition, but treats Vb2 as the control and does not relate VX to Vb1, the key point in the solution.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2565,
        "output_tokens": 4943,
        "total_tokens": 7508,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4647,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2565,
        "output_tokens": 4943,
        "total_tokens": 7508,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4647,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **cascode common-source NMOS amplifier** with a current-source load.\n\n### 1) What each device does\n- **\\(M_1\\)**: input transistor (common-source), gate driven by \\(v_{in}\\).\n- **\\(M_2\\)**: cascode transistor (common-gate), gate fixed at \\(V_{b1}\\), keeps node \\(X\\) relatively constant.\n- **\\(I_1\\)**: bias/load current source from \\(V_{DD}\\) to output node.\n\n---\n\n### 2) DC bias (assuming both NMOS in saturation)\nAt quiescent:\n\\[\nI_{D1}=I_{D2}=I_1\n\\]\n\nIf square-law and ignoring \\(\\lambda\\):\n\\[\nV_{OV1}=\\sqrt{\\frac{2I_1}{\\beta_1}},\\quad V_{in,Q}\\approx V_{TH1}+V_{OV1}\n\\]\n\\[\nV_{OV2}=\\sqrt{\\frac{2I_1}{\\beta_2}},\\quad V_X\\approx V_{b1}-V_{TH2}-V_{OV2}\n\\]\n\nSaturation/headroom conditions:\n\\[\nV_X \\ge V_{OV1}\\quad (M_1\\ \\text{sat})\n\\]\n\\[\nV_{out} \\ge V_X + V_{OV2}\\quad (M_2\\ \\text{sat})\n\\]\nUpper swing is limited by current-source compliance:\n\\[\nV_{out,\\max}\\approx V_{DD}-V_{\\text{comp},I_1}\n\\]\n\n---\n\n### 3) Small-signal behavior\n- Stage is **inverting**: \\(v_{in}\\uparrow \\Rightarrow i_{D1}\\uparrow \\Rightarrow v_{out}\\downarrow\\).\n- Cascode action of \\(M_2\\) boosts output resistance and gain.\n\nOutput resistance of NMOS cascode branch:\n\\[\nr_{o,n}\\approx r_{o1}+r_{o2}+(g_{m2}+g_{mb2})r_{o1}r_{o2}\n\\]\n(usually dominated by \\((g_{m2}r_{o2})r_{o1}\\)).\n\nIf current source has finite \\(r_{oI}\\):\n\\[\nr_{out}\\approx r_{o,n}\\parallel r_{oI}\n\\]\n\\[\nA_v \\approx -g_{m1}\\,r_{out}\n\\]\n\nFor very large \\(r_{oI}\\):\n\\[\nA_v \\approx -g_{m1}r_{o1}(1+g_{m2}r_{o2})\n\\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n\\]\n\n---\n\n### 4) Intuition\nThis is a high-gain cascode stage: \\(M_1\\) converts input voltage to current, \\(M_2\\) isolates \\(M_1\\) from output voltage swings (keeps \\(X\\) nearly fixed), so gain and bandwidth improve versus a single-transistor CS stage.",
        "format": "markdown",
        "sha256": "a87f9766ff4466208cd01dffb87e349c8c22faa66497c5ddbc1d52e1ac4c2559"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies M1 as the common-source NMOS input device and M2 as the common-gate NMOS cascode, and gives the accepted ideal-load gain expression. It meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 10919,
        "total_tokens": 12221,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10253,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 10919,
        "total_tokens": 12221,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10253,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **cascode NMOS amplifier** with an active load current source \\(I_1\\).\n\n- \\(M_1\\): common-source input device (gate at \\(V_{in}\\))\n- \\(M_2\\): common-gate cascode device (gate biased at \\(V_{b1}\\))\n- Output at drain of \\(M_2\\), loaded by current source from \\(V_{DD}\\)\n\n---\n\n### 1) DC bias (both MOS in saturation)\nAssume long-channel square law and ignore body effect for first-pass analysis.\n\n\\[\nI_{D1}=I_{D2}=I_1\n\\]\n\n\\[\nV_{OV1}=\\sqrt{\\frac{2I_1}{\\beta_1}},\\quad\nV_{OV2}=\\sqrt{\\frac{2I_1}{\\beta_2}}\n\\]\n\n\\[\nV_{in,Q}=V_{TH1}+V_{OV1}\n\\]\n\nFor \\(M_2\\):\n\\[\nV_X = V_{b1}-V_{GS2}=V_{b1}-(V_{TH2}+V_{OV2})\n\\]\n\nSaturation conditions:\n\n- \\(M_1\\): \\(V_X \\ge V_{OV1}\\)\n- \\(M_2\\): \\(V_{out}-V_X \\ge V_{OV2}\\Rightarrow V_{out}\\ge V_{b1}-V_{TH2}\\)\n\nSo the **minimum output voltage** (to keep \\(M_2\\) in saturation) is approximately:\n\\[\nV_{out,\\min}\\approx V_{b1}-V_{TH2}\n\\]\nUpper swing is limited by current-source compliance near \\(V_{DD}\\).\n\n---\n\n### 2) Small-signal gain\nLet \\(r_{o1}, r_{o2}\\) be MOS output resistances, and \\(r_{oI}\\) current-source output resistance.\n\nA very useful approximation:\n\n\\[\nR_{out,\\text{down}} \\approx r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n\\]\n\n\\[\nR_{out} \\approx R_{out,\\text{down}} \\parallel r_{oI}\n\\]\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}} \\approx -g_{m1}R_{out}\n\\]\n\nIf the top current source is ideal \\((r_{oI}\\to\\infty)\\):\n\\[\nA_v \\approx -g_{m1}\\left(r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\\right)\n\\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n\\]\n(when \\(g_{m2}r_{o2}\\gg1\\)).\n\nSo this stage gives **high gain** due to cascode multiplication of output resistance.\n\n---\n\n### 3) Intuition\n- Increasing \\(V_{in}\\) tends to increase \\(M_1\\) current.\n- Output node must move to satisfy KCL with the load current source, so \\(v_{out}\\) decreases.\n- Hence **inverting gain** (negative sign).\n- \\(M_2\\) reduces variation at node \\(X\\) and boosts output resistance (classic cascode benefit).\n\n---\n\nIf you want, I can also derive the **exact nodal small-signal formula** (with all \\(g_o\\) terms) and/or draw the small-signal equivalent circuit.",
        "format": "markdown",
        "sha256": "160664bdb3eb38410109f9eaaba90aaa6b8ffc7f2e4eb0606b957f21657721f6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source input NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent gain approximation Av ≈ −gm1 Rout. The simplified output-resistance expression is consistent with the stated high-gain approximation.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 11766,
        "total_tokens": 13068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11010,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 11766,
        "total_tokens": 13068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11010,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **cascode NMOS gain stage** with a top bias current source \\(I_1\\).\n\n### 1) DC behavior (bias point)\nAssume \\(M_1, M_2\\) are NMOS in saturation.\n\n- Same branch current:\n\\[\nI_{D1}=I_{D2}=I_1\n\\]\n- Node definitions:\n  - \\(V_{GS1}=V_{in}\\), \\(V_{DS1}=V_X\\)\n  - \\(V_{GS2}=V_{b1}-V_X\\), \\(V_{DS2}=V_{out}-V_X\\)\n\nSaturation conditions:\n\\[\nV_X \\ge V_{OV1}\n\\]\n\\[\nV_{out}-V_X \\ge V_{OV2}\n\\;\\Rightarrow\\;\nV_{out,\\min}\\approx V_X+V_{OV2}\\approx V_{b1}-V_{T2}\n\\]\nSo this stage needs headroom (roughly \\(V_{OV1}+V_{OV2}\\)).\n\n---\n\n### 2) Small-signal behavior\nLet \\(g_{m1},g_{m2},r_{o1},r_{o2}\\) be MOS small-signal params, and \\(r_{I1}\\) be output resistance of current source \\(I_1\\) (ideal \\(\\to \\infty\\)).\n\n#### Output resistance of NMOS stack:\n\\[\nR_{out,\\text{stack}}=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n\\approx g_{m2}r_{o1}r_{o2}\n\\]\nTotal output resistance:\n\\[\nR_{out}=R_{out,\\text{stack}}\\parallel r_{I1}\n\\]\n\n#### Voltage gain (\\(v_{out}/v_{in}\\), inverting):\nUseful design approximation:\n\\[\nA_v \\approx -g_{m1}R_{out}\n\\]\nIf \\(r_{I1}\\) is large and \\(g_{m2}r_{o2}\\gg1\\):\n\\[\nA_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n\\]\n(magnitude is much larger than simple CS stage).\n\nMore exact (including finite \\(r_{I1}\\)):\n\\[\nA_v=\n-\\frac{g_{m1}(g_{m2}+g_{o2})}\n{g_{o1}g_{o2}+g_{I1}(g_{o1}+g_{o2}+g_{m2})}\n\\]\nwhere \\(g_{oi}=1/r_{oi}\\), \\(g_{I1}=1/r_{I1}\\).\n\n---\n\n### 3) Interpretation\n- **Topology:** common-source \\(M_1\\) + common-gate cascode \\(M_2\\).\n- **Pros:** very high gain, high output resistance, reduced Miller effect at \\(M_1\\).\n- **Cons:** reduced output swing/headroom due to stacked NMOS devices.\n\nIf you want, I can also derive the gain step-by-step from KCL at nodes \\(X\\) and \\(V_{out}\\).",
        "format": "markdown",
        "sha256": "697c1dc7a919b95f55f00a3d3f04796ac1674929ba3ed57cca4b0611334a997b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the accepted gain and output-resistance expressions. Omitting body effect is allowed.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 16103,
        "total_tokens": 17405,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 16103,
        "total_tokens": 17405,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — this is a **cascode** (specifically, a basic NMOS cascode amplifier with a resistive load).\n\n- **\\(M_1\\)** is the input **common-source** device (gate at \\(V_{in}\\), source at ground).\n- **\\(M_2\\)** is the **common-gate** cascode device (gate fixed at bias \\(V_{b1}\\)).\n- **\\(R_D\\)** is the load to \\(V_{DD}\\), and output is at \\(M_2\\)'s drain.\n\nSo if \\(V_{b1}\\) is chosen so both transistors stay in saturation, this is the standard cascode structure.",
        "format": "markdown",
        "sha256": "eb5e9fce11b55264050c60e33e78d8bdc5eb0f2e423b420bc8657b4c5e4a30ef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1: it is a PMOS source follower with its drain grounded, not a common-source input device. Thus the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 1104,
        "total_tokens": 2480,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 956,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 1104,
        "total_tokens": 2480,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 956,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — this is a **cascode amplifier structure** (specifically, a **common-source + common-gate NMOS cascode**).\n\n- **\\(M_1\\)** is the input transistor (common-source), driven by \\(V_{in}\\).\n- **\\(M_2\\)** has its gate at a fixed bias \\(V_{b1}\\) (AC ground), so it operates as a common-gate device.\n- **\\(R_D\\)** is the load, and \\(V_{out}\\) is taken at the drain of \\(M_2\\).\n\nSo, as long as \\(M_1\\) and \\(M_2\\) are biased in saturation, this is a standard cascode stage.",
        "format": "markdown",
        "sha256": "1a09ae06632366045467a641b6b081117078ad0a24e662d60febd323ac7b004d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is not a cascode: M1 is a PMOS source follower, not a common-source input device. The answer incorrectly calls it a standard cascode.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1376,
        "output_tokens": 874,
        "total_tokens": 2250,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 718,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1376,
        "output_tokens": 874,
        "total_tokens": 2250,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 718,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — this is a **cascode** structure (specifically a simple NMOS cascode amplifier with a resistive load).\n\nWhy:\n\n- **\\(M_1\\)** is the input device in **common-source** (gate gets \\(V_{in}\\), source at ground).\n- **\\(M_2\\)** has its gate fixed at **\\(V_{b1}\\)**, so it operates as a **common-gate** device stacked on top of \\(M_1\\).\n- Output is taken at the drain of \\(M_2\\), with \\(R_D\\) to \\(V_{DD}\\).\n\nThat’s the textbook common-source + common-gate cascode arrangement (assuming \\(V_{b1}\\) is an AC-grounded bias node and both transistors are biased in saturation).",
        "format": "markdown",
        "sha256": "eaab7b336c2b67951e5bdee92df029fd17f55001b320a6a013d7e8f94b89323a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1: it is a PMOS source follower, not a common-source device with its source grounded.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1376,
        "output_tokens": 747,
        "total_tokens": 2123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1376,
        "output_tokens": 747,
        "total_tokens": 2123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Because **Miller multiplication depends on voltage gain across the parasitic feedback capacitor** (\\(C_{gd}\\) in MOS, \\(C_{bc}\\) in BJT).\n\n\\[\nC_{\\text{in,eff}} \\approx C_f(1-A_v)\n\\]\n\n- In a simple common-source/common-emitter stage, \\(A_v\\) from input to drain/collector is large and negative, so \\(1-A_v \\approx 1+|A_v|\\): big multiplication.\n- In a **cascode**, the upper common-gate/common-base device keeps the lower device’s drain/collector at nearly constant AC voltage (isolates it from output swing). So the gain across that \\(C_f\\) is small.\n\nSo \\(C_f\\) is **not strongly multiplied** (often close to just its physical value), which means less input capacitance increase and therefore higher bandwidth.  \n(Not zero in practice—finite \\(r_o\\), non-ideal biasing, and other parasitics leave some residual Miller effect.)",
        "format": "markdown",
        "sha256": "894b69b9acaa18551c6c37a3d1ef75404ae808a493de0fefc2a2334f683fc2bb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly explains that the cascode limits the lower transistor’s drain swing, reducing Miller multiplication. But it overstates the reduction: that node is low impedance, not nearly an AC ground, and the effective multiplication is roughly 2 rather than close to the physical capacitance alone.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 3337,
        "total_tokens": 3356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 3337,
        "total_tokens": 3356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect depends on the **voltage gain across the parasitic feedback capacitor** (like \\(C_{gd}\\) in MOS or \\(C_{bc}\\) in BJT):\n\n\\[\nC_{\\text{in,eff}} \\approx C_f(1 - A_v)\n\\]\n\nIn a single common-source/common-emitter stage, \\(A_v\\) is large and negative, so \\(C_f\\) gets multiplied a lot.\n\nIn a **cascode**, the upper common-gate/common-base device keeps the lower device’s drain/collector at nearly constant AC voltage (low swing at the intermediate node). So:\n\n- the gain across the lower device’s \\(C_{gd}/C_{bc}\\) is small (often near 0 to \\(-1\\), not \\(-20\\), \\(-50\\), etc.),\n- output swing is mostly at the top node, isolated from the input node.\n\nSo the feedback capacitance is not strongly multiplied, and the Miller effect is much weaker (hence higher bandwidth).",
        "format": "markdown",
        "sha256": "6a475ec06b8c0fd0e200b228853d91438e59561b45b08faca2d8c4418db4750d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the cascode’s low-impedance intermediate node has much less swing than the output, reducing Miller multiplication. Saying the gain can be near zero slightly overstates the effect, but the golden solution treats this as a minor flaw.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1416,
        "total_tokens": 1435,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1198,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1416,
        "total_tokens": 1435,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1198,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is strong only when a capacitor connects two nodes with **large voltage gain between them** (especially an inverting gain).\n\nIn a simple common-source/common-emitter stage, the gate-base to drain-collector capacitor (\\(C_{gd}\\)/\\(C_{bc}\\)) sees a large negative gain, so:\n\n\\[\nC_{\\text{in,eq}} \\approx C_{gd}(1 - A_v) \\approx C_{gd}(1+|A_v|)\n\\]\n\nwhich becomes very large.\n\nIn a **cascode**, the upper common-gate/common-base device keeps the lower transistor’s drain/collector at nearly constant AC voltage (small swing). So the gain across the lower device’s \\(C_{gd}/C_{bc}\\) is small, making the Miller multiplication factor close to 1 (or even less), not \\(1+|A_v|\\).\n\nSo: **the cascode “shields” the input device from output voltage swings, reducing input Miller capacitance and improving bandwidth.**",
        "format": "markdown",
        "sha256": "3e684bc95ccd6a611ce845fc38fa1b61aee45d6ad7242cbd6be94a9ac4ba3e39"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that the cascode’s low-impedance node limits the lower transistor’s drain swing and reduces Miller effect. However, it overstates the reduction: the gain across Cgd is roughly −1, giving a Miller factor around 2, not close to 1.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2239,
        "total_tokens": 2258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2024,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2239,
        "total_tokens": 2258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2024,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the symbols are the usual ones (**\\(M_1\\) = PMOS on top, \\(M_2\\) = NMOS on bottom**), this is a **common-gate NMOS stage with PMOS active load**.\n\n### 1) DC operation (bias)\n- \\(M_1\\) gate is fixed at \\(V_{b2}\\), source at \\(V_{DD}\\)  \n  \\[\n  I_{D1}\\approx \\frac{\\beta_p}{2}\\left(V_{DD}-V_{b2}-|V_{TP}|\\right)^2\n  \\]\n- \\(M_2\\) gate is fixed at \\(V_{b1}\\), source is input \\(V_{in}\\)  \n  \\[\n  I_{D2}\\approx \\frac{\\beta_n}{2}\\left(V_{b1}-V_{in}-V_{TN}\\right)^2\n  \\]\n- At the output node, \\(I_{D1}=I_{D2}\\) (no load current shown).\n\nSo \\(V_{b2}\\) mainly sets the load current, and \\(V_{in}\\) modulates \\(M_2\\) current.\n\n---\n\n### 2) Saturation conditions\nFor both devices to stay in saturation:\n- NMOS \\(M_2\\):  \n  \\[\n  V_{out}\\ge V_{b1}-V_{TN}\n  \\]\n- PMOS \\(M_1\\):  \n  \\[\n  V_{out}\\le V_{b2}+|V_{TP}|\n  \\]\n\nAlso \\(M_2\\) must be on:\n\\[\nV_{in}<V_{b1}-V_{TN}\n\\]\n\n---\n\n### 3) Small-signal gain\nWith \\(V_{DD},V_{b1},V_{b2}\\) as AC ground, small-signal gain is:\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\\frac{g_{m2}+g_{mb2}+g_{o2}}{g_{o1}+g_{o2}}\n\\approx (g_{m2}+g_{mb2})(r_{o1}\\parallel r_{o2})\n\\]\n(ignoring body effect: \\(A_v\\approx g_{m2}(r_{o1}\\parallel r_{o2})\\)).\n\n✅ **Sign is positive** (non-inverting): if \\(V_{in}\\) increases, \\(M_2\\) current tends to decrease, so \\(V_{out}\\) rises.\n\n---\n\n### 4) Input/output resistance (useful summary)\n- **Input resistance** (common-gate source input): low, roughly \\(\\sim 1/g_{m2}\\) (more exactly depends on \\(r_o\\)’s).\n- **Output resistance**: high, about \\(r_{o1}\\parallel r_{o2}\\).\n\n---\n\nSo overall, this is a **biased common-gate gain stage** with an active PMOS load, giving **positive voltage gain** and **low input impedance**.",
        "format": "markdown",
        "sha256": "e5ce96dfad7a913da20f083ddd2e23f3090fdf54b6d4bca70812b026fd055666"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS load, places Vin at M2’s source, identifies the bias voltages, and gives the non-inverting gain and low input resistance. Its gain expression is equivalent to the golden expression, including body effect.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 13906,
        "total_tokens": 15130,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13255,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 13906,
        "total_tokens": 15130,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13255,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the symbols are interpreted in the usual way (**\\(M_1\\): PMOS on top**, **\\(M_2\\): NMOS below with source-driven input**), this is a **common-gate NMOS stage with PMOS active load**.\n\n### 1) DC (bias) relations\n\nAt node \\(V_{out}\\), KCL gives (no external load):\n\\[\nI_{D1}=I_{D2}\n\\]\n\n\\[\nI_{D1}\\approx \\frac12 \\beta_p\\,(V_{SG1}-|V_{TP}|)^2\\,(1+\\lambda_p V_{SD1}),\n\\quad\nV_{SG1}=V_{DD}-V_{b2},\\; V_{SD1}=V_{DD}-V_{out}\n\\]\n\n\\[\nI_{D2}\\approx \\frac12 \\beta_n\\,(V_{GS2}-V_{TN})^2\\,(1+\\lambda_n V_{DS2}),\n\\quad\nV_{GS2}=V_{b1}-V_{in},\\; V_{DS2}=V_{out}-V_{in}\n\\]\n\nSo \\(V_{b2}\\) sets the pull-up current of \\(M_1\\), and \\(V_{b1}\\) sets the conduction of \\(M_2\\).\n\n---\n\n### 2) Saturation/headroom conditions\n\nFor proper amplifier operation (both in saturation):\n\n- \\(M_2\\) (NMOS):  \n  \\[\n  V_{out}\\ge V_{b1}-V_{TN}\n  \\]\n- \\(M_1\\) (PMOS):  \n  \\[\n  V_{out}\\le V_{b2}+|V_{TP}|\n  \\]\n\nHence usable output range:\n\\[\n\\boxed{V_{b1}-V_{TN}\\ \\le\\ V_{out}\\ \\le\\ V_{b2}+|V_{TP}|}\n\\]\n\nAlso \\(M_2\\) turns off if \\(V_{in}\\gtrsim V_{b1}-V_{TN}\\), then \\(V_{out}\\) goes high (toward \\(V_{DD}\\)).\n\n---\n\n### 3) Small-signal gain\n\nWith \\(V_{DD},V_{b1},V_{b2}\\) as AC ground:\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n= \\frac{g_{m2}+g_{mb2}+g_{o2}}{g_{o1}+g_{o2}+g_L}\n\\]\n\n(\\(g_L=0\\) if no load.)\n\nApproximation (ignoring body effect and \\(g_o\\) in numerator):\n\\[\n\\boxed{A_v \\approx +\\,g_{m2}(r_{o1}\\parallel r_{o2}\\parallel R_L)}\n\\]\n\nSo this is a **non-inverting** gain stage (common-gate behavior):  \nif \\(v_{in}\\uparrow\\), \\(V_{GS2}\\downarrow\\), \\(I_{D2}\\downarrow\\), and \\(v_{out}\\uparrow\\).\n\n---\n\nIf you want, I can also give a **piecewise large-signal transfer \\(V_{out}(V_{in})\\)** (cutoff/sat/triode regions) explicitly.",
        "format": "markdown",
        "sha256": "32adbb47d1e5f9fcf59389497578058233347cb56665d49a35ec4d38f073c564"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the source-driven common-gate NMOS stage, its biasing, non-inverting action, and gain. It omits the low input resistance description required for full credit.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 13060,
        "total_tokens": 14284,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12355,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 13060,
        "total_tokens": 14284,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12355,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the intended interpretation is:\n\n- \\(M_1\\): **PMOS** load transistor, source at \\(V_{DD}\\), gate at \\(V_{b2}\\), drain at \\(V_{out}\\)\n- \\(M_2\\): **NMOS** transistor with gate at \\(V_{b1}\\), source driven by \\(V_{in}\\), drain at \\(V_{out}\\)\n\nthis is a **common-gate NMOS stage with a PMOS active load**.\n\n---\n\n### 1) DC (bias) analysis\n\nAt node \\(V_{out}\\), DC current must satisfy:\n\\[\nI_{D1}=I_{D2}\n\\]\n\nIf both are in saturation (long-channel model, ignoring \\(\\lambda\\)):\n\\[\nI_{D1}=\\frac{\\beta_p}{2}\\left(V_{DD}-V_{b2}-|V_{TP}|\\right)^2\n\\]\n\\[\nI_{D2}=\\frac{\\beta_n}{2}\\left(V_{b1}-V_{in}-V_{TN}\\right)^2\n\\]\nSo bias condition is:\n\\[\n\\frac{\\beta_p}{2}\\left(V_{DD}-V_{b2}-|V_{TP}|\\right)^2\n=\n\\frac{\\beta_n}{2}\\left(V_{b1}-V_{in}-V_{TN}\\right)^2\n\\]\n\nIf channel-length modulation is included, \\(V_{out}\\) is set by the \\(\\lambda\\)-dependent terms; if \\(\\lambda=0\\), current equality is independent of \\(V_{out}\\) (only compliance limits matter).\n\n---\n\n### 2) Saturation/compliance conditions\n\nFor \\(M_1\\) (PMOS) in saturation:\n\\[\nV_{SD1}\\ge V_{OV1}\n\\;\\Rightarrow\\;\nV_{out}\\le V_{DD}-V_{OV1}\n\\]\nwhere \\(V_{OV1}=V_{SG1}-|V_{TP}|\\).\n\nFor \\(M_2\\) (NMOS) in saturation:\n\\[\nV_{DS2}\\ge V_{OV2}\n\\;\\Rightarrow\\;\nV_{out}\\ge V_{in}+V_{OV2}\n\\]\nwhere \\(V_{OV2}=V_{GS2}-V_{TN}=V_{b1}-V_{in}-V_{TN}\\).\n\nSo valid output range:\n\\[\nV_{in}+V_{OV2}\\le V_{out}\\le V_{DD}-V_{OV1}\n\\]\n\n---\n\n### 3) Small-signal gain\n\nUsing \\(r_{o1}, r_{o2}\\) and \\(g_{m2}\\), with bias nodes as AC ground:\n\\[\n\\frac{v_{out}}{r_{o1}}+\\frac{v_{out}-v_{in}}{r_{o2}}-g_{m2}v_{in}=0\n\\]\n\\[\nA_v\\equiv \\frac{v_{out}}{v_{in}}\n=\n\\frac{g_{m2}+1/r_{o2}}{1/r_{o1}+1/r_{o2}}\n\\approx g_{m2}(r_{o1}\\parallel r_{o2})\n\\]\n(If body effect matters, replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\).)\n\nThis gain is **positive** (non-inverting common-gate behavior): increasing \\(V_{in}\\) reduces \\(V_{GS2}\\), hence \\(I_{D2}\\) decreases, so \\(V_{out}\\) rises.\n\n---\n\n### 4) Output resistance\n\nWith \\(v_{in}=0\\):\n\\[\nR_{out}\\approx r_{o1}\\parallel r_{o2}\n\\]\n\n---\n\nIf you want, I can also give a numeric example or derive the exact \\(V_{out}(V_{in})\\) including \\(\\lambda_n,\\lambda_p\\).",
        "format": "markdown",
        "sha256": "7223cd70b895056889a4e24dc96c83b818d49665783134a107e64a642f2f9722"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS load, source-driven input, bias nodes, non-inverting gain, and an equivalent gain expression. It omits the required description of the low input resistance.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 15273,
        "total_tokens": 16497,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 15273,
        "total_tokens": 16497,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the bias/supply voltages are ideal AC grounds (as usual in small-signal pole counting), the circuit is **second-order**, i.e. it has **2 poles**.\n\n- Dynamic node 1: \\(M_1\\) gate node (\\(R_S\\), \\(C_{GS}\\), \\(C_{GD}\\))\n- Dynamic node 2: output node \\(V_{out}\\) (\\(C_{DB}\\), \\(C_{DB2}\\), \\(C_{GD2}\\), and \\(C_{GD}\\))\n\nSo the transfer function has **two poles** (and typically a feedforward zero from \\(C_{GD}\\)).",
        "format": "markdown",
        "sha256": "0ab670f3398169ba6af5bc7f46afff0db175782da46947915d8bb78277b4d849"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles from the gate and output nodes, assigns the capacitances to the appropriate nodes, and notes the coupling through M1's CGD.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 7297,
        "total_tokens": 9038,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7155,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 7297,
        "total_tokens": 9038,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7155,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the bias voltage sources are ideal (AC ground), the circuit has **2 poles**.\n\nWhy: there are only **two independent dynamic nodes**:\n\n1. \\(M_1\\) gate node (with \\(R_S\\), \\(C_{GS}\\), and one side of \\(C_{GD}\\))\n2. Output node \\(V_{out}\\) (with \\(C_{DB}\\), \\(C_{GD2}\\), \\(C_{DB2}\\), and the other side of \\(C_{GD}\\))\n\nSo the transfer function denominator is second order (2 poles).  \n(\\(C_{GD}\\) also introduces a feedforward zero, but that’s separate.)",
        "format": "markdown",
        "sha256": "8a36fe17bf41505ce67bb09b376fcb2d8de415e865b31825c85afda9054d60fe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles from the M1 gate and output nodes, assigns the capacitors to the right nodes, and notes that CGD couples them and adds a zero.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1741,
        "output_tokens": 5571,
        "total_tokens": 7312,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5425,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1741,
        "output_tokens": 5571,
        "total_tokens": 7312,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5425,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the bias/supply nodes are ideal AC grounds (as usually intended in this small-signal model), the circuit has **2 poles**.\n\nWhy: there are only **two independent dynamic nodes**:\n1. \\(M_1\\) gate node (input side),\n2. \\(V_{out}\\) node.\n\nAll the shown capacitors are connected to these nodes (or between them), so the transfer function denominator is second-order.\n\n(You can also get a zero from \\(C_{GD}\\), but that does **not** add a pole.)",
        "format": "markdown",
        "sha256": "95ebfc51915a33d21334d5cdf0e0d9554850e4f320e3900b3ce74629c91540f8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent dynamic nodes—the M1 gate and output—and notes that CGD coupling adds a zero, not another pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1741,
        "output_tokens": 5026,
        "total_tokens": 6767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4906,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1741,
        "output_tokens": 5026,
        "total_tokens": 6767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4906,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat it as a **resistor-loaded NMOS inverter** with a stacked pull-down network.\n\nLet the middle node be \\(V_X\\), and define\n\\[\n\\beta_i=\\mu_n C_{ox}(W/L)_i,\\qquad V_{OV}=V_{in}-V_T\n\\]\n(assuming long-channel devices, same \\(V_T\\), no body effect, \\(\\lambda\\approx 0\\)).\n\n### 1) Regions of operation\n\n- **\\(V_{in}\\le V_T\\)**: both MOSFETs off \\(\\Rightarrow I_D\\approx 0\\), so\n  \\[\n  V_{out}\\approx V_{DD}.\n  \\]\n\n- **\\(V_{in}>V_T\\), normal active pull-down**:\n  For \\(M_2\\) to be on: \\(V_{GS2}=V_{in}-V_X>V_T \\Rightarrow V_X<V_{OV}\\).  \n  That automatically means \\(M_1\\) is in **triode** (not saturation), while \\(M_2\\) is usually in **saturation** if \\(V_{out}\\) is high enough.\n\n  Equations:\n  \\[\n  I_D=\\beta_1\\!\\left(V_{OV}V_X-\\frac{V_X^2}{2}\\right)\n  =\\frac{\\beta_2}{2}(V_{OV}-V_X)^2\n  \\]\n  giving\n  \\[\n  V_X=V_{OV}\\!\\left(1-\\sqrt{\\frac{\\beta_1}{\\beta_1+\\beta_2}}\\right),\n  \\]\n  \\[\n  I_D=\\frac{\\beta_1\\beta_2}{2(\\beta_1+\\beta_2)}\\,V_{OV}^2.\n  \\]\n  Then\n  \\[\n  V_{out}=V_{DD}-R_D I_D.\n  \\]\n\n  So the stack behaves like one weaker NMOS with\n  \\[\n  \\beta_{\\text{eq}}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}.\n  \\]\n\n  If \\(M_1=M_2\\) (\\(\\beta_1=\\beta_2=\\beta\\)):\n  \\[\n  I_D=\\frac{\\beta}{4}(V_{in}-V_T)^2,\\quad\n  V_X=(1-\\tfrac1{\\sqrt2})(V_{in}-V_T).\n  \\]\n\n- **Large \\(V_{in}\\)**: when \\(V_{out}<V_{in}-V_T\\), \\(M_2\\) also enters triode; then both are triode and you solve numerically from triode equations + \\(V_{out}=V_{DD}-R_D I_D\\).\n\n---\n\n### 2) Useful interpretation\n\nThis is an inverting stage where stacking the two NMOS devices introduces local feedback (via \\(V_X\\)), reducing pull-down strength and effective \\(g_m\\) compared with a single NMOS.  \nIf you want, I can also derive the full \\(V_{out}\\)–\\(V_{in}\\) transfer curve including the high-\\(V_{in}\\) (both-triode) region.",
        "format": "markdown",
        "sha256": "344fccb04933b8ec92e25f9436475999625831af98fc827c6ebe8bbed0a83a2b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The derived \\(\\beta_{\\rm eq}=\\beta_1\\beta_2/(\\beta_1+\\beta_2)\\u007f\\) is exactly the effective aspect ratio relation for the common-gate series pair, implying \\(L_{\\rm eff}\\approx L_1+L_2\\) for equal widths. It also correctly identifies the lower device as triode and the upper as saturated in the stated operating region.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 15191,
        "total_tokens": 16619,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 15191,
        "total_tokens": 16619,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let the middle node (between \\(M_1\\) and \\(M_2\\)) be \\(V_X\\).  \nAssume long-channel NMOS, same \\(V_T\\), no channel-length modulation/body effect first.\n\nDefine:\n\\[\nA \\equiv V_{in}-V_T,\\qquad \\beta_i=\\mu_n C_{ox}(W/L)_i\n\\]\n\nThe load current is\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}.\n\\]\n\n## 1) Region check\n- If \\(V_{in}\\le V_T\\): both transistors OFF \\(\\Rightarrow I_D\\approx 0,\\; V_{out}\\approx V_{DD}\\).\n- If \\(V_{in}>V_T\\): current can flow.  \n  Also, whenever \\(M_2\\) is ON, \\(M_1\\) is forced into triode (not saturation).\n\n---\n\n## 2) Effective pull-down behavior\nA useful result is that the two-stack pull-down behaves like **one NMOS** with:\n\\[\n\\beta_{eq}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}.\n\\]\n(If \\(\\beta_1=\\beta_2=\\beta\\), then \\(\\beta_{eq}=\\beta/2\\).)\n\nSo:\n\\[\nI_D=\n\\begin{cases}\n\\dfrac{\\beta_{eq}}{2}(V_{in}-V_T)^2, & V_{out}\\ge V_{in}-V_T \\quad (M_2\\ \\text{sat})\\\\[6pt]\n\\beta_{eq}\\!\\left[(V_{in}-V_T)V_{out}-\\dfrac{V_{out}^2}{2}\\right], & V_{out}<V_{in}-V_T \\quad (M_1,M_2\\ \\text{triode})\n\\end{cases}\n\\]\n\n---\n\n## 3) With resistor load (\\(R_D\\))\nCombine with \\(I_D=(V_{DD}-V_{out})/R_D\\):\n\n### (a) Upper device saturation branch\n\\[\nV_{out}=V_{DD}-\\frac{\\beta_{eq}R_D}{2}(V_{in}-V_T)^2\n\\]\n(valid while \\(V_{out}\\ge V_{in}-V_T\\)).\n\n### (b) Both triode branch\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\beta_{eq}\\!\\left[(V_{in}-V_T)V_{out}-\\frac{V_{out}^2}{2}\\right]\n\\]\n(a quadratic in \\(V_{out}\\)).\n\n---\n\n## 4) Interpretation\n- It is an **inverting stage** (\\(V_{in}\\uparrow \\Rightarrow V_{out}\\downarrow\\)).\n- Compared with a single NMOS pull-down of size \\(\\beta\\), this stack is weaker; for equal devices it is exactly half-strength (\\(\\beta/2\\)).\n- Small-signal gain (on saturation branch) is approximately:\n\\[\nA_v \\approx -g_{m,eq}R_D,\\qquad g_{m,eq}=\\beta_{eq}(V_{in}-V_T).\n\\]\n\nIf you want, I can also derive the switching point \\(V_{in}\\) where the circuit moves from the saturation branch to the triode branch, or sketch the full VTC.",
        "format": "markdown",
        "sha256": "5f86aa2b9fd2e9641b759548cb61cce23e715ce7ca2fffd5c6d10857a9a339a6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the lower device as triode-region and the upper device as saturated on the main branch. The derived equivalent β is precisely the series-stack result corresponding to a longer effective channel (twice the length for equal devices), and the load/region analysis is consistent.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1428,
        "output_tokens": 16660,
        "total_tokens": 18088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1428,
        "output_tokens": 16660,
        "total_tokens": 18088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **resistor-loaded NMOS inverter** where the pull-down is a **stack of two NMOS with tied gates** (often called a self-cascode/composite NMOS structure).\n\nI’ll assume long-channel MOS, same \\(V_T\\), ignore body effect and channel-length modulation unless noted.\n\n---\n\nLet:\n\n- \\(V_X\\): node between \\(M_1\\) and \\(M_2\\)\n- \\(\\beta_i=\\mu_n C_{ox}(W/L)_i\\)\n- \\(I_D\\): current through \\(R_D\\), \\(M_2\\), \\(M_1\\)\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}\n\\]\n\n## 1) \\(V_{in}\\le V_T\\): cutoff\n- \\(M_1\\) off \\(\\Rightarrow\\) stack off\n- \\(I_D\\approx 0\\)\n- \\[\nV_{out}\\approx V_{DD}\n\\]\n\n---\n\n## 2) \\(V_{in}>V_T\\), moderate pull-down (\\(M_2\\) sat, \\(M_1\\) triode)\n\nFor this region:\n\n\\[\nI_D = \\beta_1\\!\\left[(V_{in}-V_T)V_X-\\frac{V_X^2}{2}\\right]\n\\]\n\\[\nI_D = \\frac{\\beta_2}{2}(V_{in}-V_X-V_T)^2\n\\]\n\nSolving gives:\n\n\\[\nV_X=(V_{in}-V_T)\\left(1-\\sqrt{\\frac{\\beta_1}{\\beta_1+\\beta_2}}\\right)\n\\]\n\n\\[\nI_D=\\frac{\\beta_1\\beta_2}{2(\\beta_1+\\beta_2)}(V_{in}-V_T)^2\n\\]\n\nHence:\n\n\\[\nV_{out}=V_{DD}-R_D\\frac{\\beta_1\\beta_2}{2(\\beta_1+\\beta_2)}(V_{in}-V_T)^2\n\\]\n\nIf \\(M_1,M_2\\) are identical (\\(\\beta_1=\\beta_2=\\beta\\)):\n\n\\[\nI_D=\\frac{\\beta}{4}(V_{in}-V_T)^2,\\qquad\nV_{out}=V_{DD}-\\frac{\\beta R_D}{4}(V_{in}-V_T)^2\n\\]\n\n(Compared to one NMOS, pull-down strength is reduced.)\n\n---\n\n## 3) Large \\(V_{in}\\): \\(V_{out}\\) low enough that \\(M_2\\) enters triode\nBoundary is roughly when:\n\n\\[\nV_{out}=V_{in}-V_T\n\\]\n\nBeyond that, both devices are triode and you solve with triode equations + resistor KCL.\n\nFor identical devices, a compact relation is:\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\frac{\\beta}{4}\\left[2(V_{in}-V_T)V_{out}-V_{out}^2\\right]\n\\]\n\nSo \\(V_{out}\\) keeps dropping toward 0 as \\(V_{in}\\) increases.\n\n---\n\n## Interpretation\n- It is an **inverting transfer**: low \\(V_{in}\\to\\) high \\(V_{out}\\), high \\(V_{in}\\to\\) low \\(V_{out}\\).\n- Two stacked NMOS with same gate act like a weaker/linearized composite pull-down.\n- If body effect is included, \\(M_2\\) is even weaker (its source rises), so pull-down current is smaller than ideal equations above. \n\nIf you want, I can also plot/derive the full \\(V_{out}\\)-vs-\\(V_{in}\\) transfer including region boundaries for given \\(V_{DD},R_D,\\beta,V_T\\).",
        "format": "markdown",
        "sha256": "649df45c6afa522477641735646f7d742fb0d176b9aa0e4b219c37209f78c31f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the tied-gate NMOS stack and derives the appropriate triode/saturation behavior; its equations for identical devices imply half the pull-down strength. However, it does not clearly state the central interpretation that the stack acts like one NMOS with approximately twice the effective channel length.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 14740,
        "total_tokens": 16168,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13916,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 14740,
        "total_tokens": 16168,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13916,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **source-coupled NMOS pair** (a differential pair with one input tied to a bias \\(V_b\\)), with a tail current source \\(I_1\\), and a single-ended resistive load \\(R_D\\).\n\n### 1) What it does (qualitatively)\n- \\(I_1\\) is fixed, so \\(M_1\\) and \\(M_2\\) **share** this current:\n  \\[\n  I_{D1}+I_{D2}=I_1\n  \\]\n- If \\(V_{in}\\) increases relative to \\(V_b\\), \\(M_1\\) takes more current, so \\(M_2\\) takes less.\n- Output is at \\(M_2\\) drain:\n  \\[\n  V_{out}=V_{DD}-R_D I_{D2}\n  \\]\n  So as \\(I_{D2}\\) decreases, \\(V_{out}\\) rises.\n- Therefore this stage is **non-inverting** from \\(V_{in}\\to V_{out}\\).\n\n---\n\n### 2) Large-signal transfer (assuming matched NMOS, saturation, \\(\\lambda\\approx0\\))\nLet \\(\\beta=\\mu_n C_{ox}(W/L)\\), \\(V_T\\) same for both, and define\n\\[\n\\Delta V = V_{in}-V_b.\n\\]\nFor \\(|\\Delta V|\\le \\sqrt{2I_1/\\beta}\\) (both transistors on):\n\\[\nI_{D2}=\\frac{\\beta}{8}\\left(\\sqrt{\\frac{4I_1}{\\beta}-\\Delta V^2}-\\Delta V\\right)^2\n\\]\n\\[\nV_{out}=V_{DD}-R_D I_{D2}.\n\\]\n\nLimits (current steering):\n- \\(\\Delta V\\ll0\\): \\(I_{D2}\\to I_1\\), so \\(V_{out}\\to V_{DD}-I_1R_D\\) (low output).\n- \\(\\Delta V\\gg0\\): \\(I_{D2}\\to0\\), so \\(V_{out}\\to V_{DD}\\) (high output).\n\nSo it behaves like a smooth comparator/transfer around \\(V_{in}\\approx V_b\\).\n\n---\n\n### 3) Small-signal gain around balance point (\\(V_{in}\\approx V_b\\))\nAt symmetry: \\(I_{D1}=I_{D2}=I_1/2\\), \\(V_{out,Q}=V_{DD}-\\frac{I_1R_D}{2}\\).\n\nSmall-signal:\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\\approx\n\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\,(R_D\\parallel r_{o2})\n\\]\nIf matched (\\(g_{m1}=g_{m2}=g_m\\)):\n\\[\nA_v \\approx +\\frac{g_m}{2}(R_D\\parallel r_{o2})\n\\]\n(positive gain).\n\n---\n\n### 4) Key practical conditions\n- \\(M_2\\) saturation (for simple model): \\(V_{out}\\gtrsim V_b-V_T\\).\n- Tail source compliance must hold at the common-source node.\n- Input resistance is very high (MOS gate), output resistance roughly \\(R_D\\parallel r_{o2}\\) (first-order).\n\n---\n\nIf you want, I can also derive the **exact \\(V_{out}(V_{in})\\) piecewise curve** including cutoff/triode boundaries for \\(M_2\\).",
        "format": "markdown",
        "sha256": "3e53fb0fa4c6eeee3c6cb11de6d655736c0618971a383a236a568f896dc5d60b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, with M2 biased at Vb and output taken at its drain. The current-steering explanation and positive gain sign are also consistent with the circuit.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 9904,
        "total_tokens": 12199,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9124,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 9904,
        "total_tokens": 12199,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9124,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1,M_2\\) are matched NMOS in saturation (long-channel, \\(\\lambda \\approx 0\\)):\n\n### 1) Circuit type and basic behavior\nThis is a **source-coupled pair** (differential pair) with tail current \\(I_1\\), but only the right branch has a load resistor \\(R_D\\), so output is single-ended.\n\n\\[\nI_{D1}+I_{D2}=I_1,\\qquad V_{out}=V_{DD}-R_D I_{D2}\n\\]\n\nSo \\(V_{in}\\) controls how \\(I_1\\) is split between \\(M_1\\) and \\(M_2\\).\n\n- If \\(V_{in}\\) increases (with \\(V_b\\) fixed), \\(M_1\\) takes more current \\(\\Rightarrow I_{D2}\\) decreases \\(\\Rightarrow V_{out}\\) rises.\n- If \\(V_{in}\\) decreases, \\(I_{D2}\\) increases \\(\\Rightarrow V_{out}\\) falls.\n\nSo this stage is **non-inverting** from \\(V_{in}\\) to \\(V_{out}\\).\n\n---\n\n### 2) Key DC points\nFor matched devices at \\(V_{in}=V_b\\):\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2},\\qquad V_{out,Q}=V_{DD}-\\frac{I_1R_D}{2}\n\\]\n\nExtremes:\n- \\(V_{in}\\gg V_b\\): \\(I_{D2}\\to 0\\), \\(V_{out}\\to V_{DD}\\)\n- \\(V_{in}\\ll V_b\\): \\(I_{D2}\\to I_1\\), \\(V_{out}\\to V_{DD}-I_1R_D\\)\n\nSo output swing is approximately:\n\\[\nV_{DD}-I_1R_D \\le V_{out}\\le V_{DD}\n\\]\n\n---\n\n### 3) Small-signal gain near \\(V_{in}=V_b\\)\nAt balance, each transistor carries \\(I_1/2\\), with \\(g_m\\) of each transistor at that bias.\n\nFor matched pair and ideal tail source:\n\\[\n\\Delta I_{D2}\\approx -\\frac{g_m}{2}\\,\\Delta V_{in}\n\\]\n\\[\n\\Delta V_{out}\\approx -R_D\\,\\Delta I_{D2}\n=+\\frac{g_m R_D}{2}\\,\\Delta V_{in}\n\\]\n\n\\[\n\\boxed{A_v \\approx +\\frac{g_m R_D}{2}}\n\\]\n(positive gain).\n\n---\n\n### 4) Saturation condition (important)\nFor \\(M_2\\) to stay in saturation:\n\\[\nV_{out}\\ge V_b-V_T\n\\]\nWorst case at low output (\\(I_{D2}\\approx I_1\\)):\n\\[\nV_{DD}-I_1R_D \\ge V_b - V_T\n\\]\nThis sets an upper bound on \\(R_D\\) for proper active operation.\n\n---\n\nIf you want, I can also write the full large-signal transfer \\(V_{out}(V_{in})\\) (square-law form) piecewise.",
        "format": "markdown",
        "sha256": "eae5ba160f94eb4ab3097f00290cd7ffb0b60ebefbefa281921764e331b16dd9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair, gives the non-inverting signal behavior and matched-pair gain, and describes the branch currents and output consistently with the circuit.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2295,
        "output_tokens": 10389,
        "total_tokens": 12684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9683,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2295,
        "output_tokens": 10389,
        "total_tokens": 12684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9683,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **source-coupled NMOS differential pair** (single-ended output), with:\n\n- tail current source \\(I_1\\),\n- input on \\(M_1\\): \\(V_{in}\\),\n- reference on \\(M_2\\): \\(V_b\\),\n- resistor load \\(R_D\\) at \\(M_2\\) drain.\n\nSo it acts like a **comparator / transconductor**: it steers the fixed tail current between \\(M_1\\) and \\(M_2\\), and \\(R_D\\) converts \\(M_2\\) current to \\(V_{out}\\).\n\n---\n\n### 1) Core DC relations\n\\[\nI_{D1}+I_{D2}=I_1,\\qquad\nV_{out}=V_{DD}-R_D I_{D2}\n\\]\n\nAssume matched long-channel NMOS (\\(\\beta\\), \\(V_T\\)), saturation, \\(\\lambda\\approx 0\\), and define:\n\\[\n\\Delta \\equiv V_{in}-V_b\n\\]\n\nFor the region where both are on:\n\\[\nI_{D2}\n=\n\\frac{I_1}{2}\n-\\frac{\\beta\\Delta}{4}\\sqrt{\\frac{4I_1}{\\beta}-\\Delta^2}\n\\]\n(and \\(I_{D1}=I_1-I_{D2}\\)).\n\nOutside that region (current fully steered):\n- If \\(V_{in}\\gg V_b\\): \\(I_{D2}\\to 0\\), so \\(V_{out}\\to V_{DD}\\) (HIGH).\n- If \\(V_{in}\\ll V_b\\): \\(I_{D2}\\to I_1\\), so \\(V_{out}\\to V_{DD}-I_1R_D\\) (LOW).\n\nSo \\(V_{out}\\) increases with \\(V_{in}\\): **non-inverting** transfer.\n\n---\n\n### 2) Switching point\nFor matched devices, equal current split occurs at:\n\\[\nV_{in}=V_b,\\quad I_{D1}=I_{D2}=I_1/2\n\\]\n\\[\nV_{out,Q}=V_{DD}-\\frac{I_1R_D}{2}\n\\]\n\n---\n\n### 3) Small-signal gain near \\(V_{in}\\approx V_b\\)\nAt the balanced point, each device has \\(g_m\\), and:\n\\[\n\\Delta i_{D2}\\approx -\\frac{g_m}{2}\\,\\Delta v_{in}\n\\]\n\\[\nA_v\\equiv \\frac{\\Delta v_{out}}{\\Delta v_{in}}\n\\approx +\\frac{g_m}{2}(R_D\\parallel r_{o2})\n\\approx +\\frac{g_mR_D}{2}\\ \\text{if }r_{o2}\\gg R_D\n\\]\n\nSo near threshold it is a **linear amplifier**; for large input difference it behaves like a **current-steering switch/comparator**.\n\n---\n\nIf you want, I can also derive the same with finite \\(r_o\\), mismatch (\\(V_{T1}\\neq V_{T2}\\), \\(\\beta_1\\neq\\beta_2\\)), and give the exact trip-point shift.",
        "format": "markdown",
        "sha256": "2bf111ffa61f6cc5cbf719821f69a64b37d3f6dff55fe801486e35f86c671f59"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a source-coupled differential pair with M2 biased at Vb and output at its drain. Its current-steering description and non-inverting gain are consistent with the golden solution.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2295,
        "output_tokens": 9829,
        "total_tokens": 12124,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9131,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2295,
        "output_tokens": 9829,
        "total_tokens": 12124,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9131,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The node \\(V_{out}\\) is the **source of \\(M_1\\)** (common-drain device), and \\(M_2\\) mostly just biases it (high \\(r_o\\) current sink).\n\nWhen you compute output impedance, set \\(V_{in}\\) to AC ground, so the gate of \\(M_1\\) is connected to ground through \\(R_s\\), not directly.\n\nBecause of \\(C_{gs1}\\):\n\n- a change at \\(V_{out}\\) couples to the gate through \\(C_{gs1}\\),\n- but the gate returns through \\(R_s\\), so it follows with an RC delay,\n- this delayed gate motion modulates \\(M_1\\)’s \\(g_m\\)-current.\n\nThat delayed feedback creates a \\(v\\)-to-\\(i\\) relation with a \\(di/dt\\) term (inductor-like behavior).\n\nA small-signal form (ignoring \\(r_o\\) first) is:\n\n\\[\nZ_{out,1}(s)=\\frac{1+sR_sC_{gs1}}{g_{m1}+sC_{gs1}}\n\\]\n\nIts imaginary part is:\n\n\\[\n\\Im\\{Z_{out,1}\\}=\\frac{\\omega C_{gs1}(g_{m1}R_s-1)}{g_{m1}^2+(\\omega C_{gs1})^2}\n\\]\n\nSo if \\(g_{m1}R_s>1\\), \\(\\Im\\{Z\\}>0\\): the output looks **inductive** over a frequency range (before high-frequency parasitics make it capacitive again).\n\nFor \\(g_mR_s\\gg1\\), it behaves like a lossy series \\(R\\!-\\!L\\):\n\\[\nR_{eq}\\approx \\frac{1}{g_m},\\qquad\nL_{eq}\\approx \\frac{R_sC_{gs1}}{g_m}.\n\\]\n\nSo the circuit can show inductive output impedance because \\(R_s\\), \\(C_{gs1}\\), and \\(g_m\\) form an **active inductor (gyrator-like)** effect.",
        "format": "markdown",
        "sha256": "8cd4a1d77f11dbe2136e51f637d83cadf30e17943e182961178ca68a177a807f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower, gives the correct output-impedance expression and inductive condition, and explains the Rs–Cgs1 feedback mechanism. The series-L approximation is valid for gmRs ≫ 1; the high-frequency-parasitic caveat does not undermine the main result.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 12541,
        "total_tokens": 14131,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 12541,
        "total_tokens": 14131,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **active-inductor** effect.\n\nIf you compute small-signal \\(Z_{out}\\) at node \\(V_{out}\\), set \\(V_{in}\\) to AC ground (for output impedance test), and treat \\(M_2\\) mainly as a bias current source (large \\(r_o\\)).\n\nFor \\(M_1\\), the key is the pair \\((R_S,\\;C_{gs1})\\):\n\n1. A small \\(v_{out}\\) variation couples to the gate through \\(C_{gs1}\\).\n2. The gate returns through \\(R_S\\), so \\(v_g\\) is delayed (RC phase shift).\n3. \\(M_1\\)’s transconductance converts this delayed \\(v_{gs}\\) into output current.\n\nThat delay can make output current **lag** output voltage, i.e. inductive behavior.\n\nA common approximate result is:\n\\[\nZ_{out}(s)\\approx \\frac{1+sR_SC_{gs1}}{g_{m1}+sC_{gs1}}\n\\]\nSo\n\\[\n\\Im\\{Z_{out}\\} \\propto (g_{m1}R_S-1)\n\\]\nHence, when\n\\[\ng_{m1}R_S>1\n\\]\nthe imaginary part is positive \\((+j\\omega L)\\): the output looks inductive.\n\nLow-frequency equivalent:\n\\[\nZ_{out}\\approx \\frac{1}{g_m}+j\\omega L_{eq},\\quad\nL_{eq}\\approx \\frac{C_{gs}(g_mR_S-1)}{g_m^2}\n\\approx \\frac{R_SC_{gs}}{g_m}\\ (\\text{if }g_mR_S\\gg1)\n\\]\n\nSo the circuit can show inductive output impedance because \\(R_S\\) + MOS capacitance + \\(g_m\\) create a **gyrator-like active inductance** (energy stored electrically in \\(C_{gs}\\), not magnetically in a real coil).",
        "format": "markdown",
        "sha256": "53f7ae477368eeadbe0482345312c2655357f5b86424b25a218290bb04172dd6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the RS–Cgs1 mechanism and gives the appropriate Zout expression. It derives the right inductive condition, gm1RS > 1, and the correct low-frequency equivalent inductance; the omitted explicit high-frequency limit is a minor omission.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1590,
        "output_tokens": 9713,
        "total_tokens": 11303,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9278,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1590,
        "output_tokens": 9713,
        "total_tokens": 11303,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9278,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **source follower (M1)** biased by a current sink (M2).  \nWhen finding \\(Z_{out}\\), set \\(V_{in}\\) to AC ground.\n\nThe key is: the gate of \\(M_1\\) is **not an ideal AC ground** at high frequency because of \\(R_S\\), and \\(C_{gs1}\\) couples output (source) motion back to the gate.\n\nFor small signal (ignoring \\(r_o\\) first):\n\n\\[\nZ_{out,M1}(s)\\approx \\frac{1+sR_SC_{gs1}}{g_{m1}+g_{mb1}+sC_{gs1}}\n\\]\n\nSo at low/moderate \\(\\omega\\),\n\n\\[\nZ_{out,M1}\\approx \\frac{1}{g_m^\\*}+s\\,\\frac{C_{gs1}(g_m^\\*R_S-1)}{(g_m^\\*)^2},\n\\quad g_m^\\*=g_{m1}+g_{mb1}\n\\]\n\nThe \\(s\\)-term is an **inductive term** (\\(+sL\\)) if:\n\n\\[\ng_m^\\*R_S > 1\n\\]\n\nSo the output can look like \\(R + sL\\), with roughly\n\n\\[\nL_{eq}\\approx \\frac{R_SC_{gs1}}{g_m^\\*}\\quad (g_m^\\*R_S\\gg1)\n\\]\n\n---\n\n### Physical intuition\n- A change at \\(V_{out}\\) couples through \\(C_{gs1}\\) to the gate.\n- Because of \\(R_S\\), gate voltage responds with delay (phase shift).\n- That delayed \\(v_{gs}\\) modulates \\(g_m v_{gs}\\) current so that output current opposes rapid change—like an inductor does.\n\n\\(M_2\\) mostly provides bias; its finite \\(r_{o2}\\) just shunts this behavior (\\(Z_{out}\\approx Z_{out,M1}\\parallel r_{o2}\\)).",
        "format": "markdown",
        "sha256": "8502f713bbeef218b13ba24713d2a72fa5a171242ff5d7d44a599a9ac9d17725"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the frequency-dependent output impedance. The expression gives the low-frequency limit near 1/gm* and the high-frequency limit Rs, with inductive rise when Rs·gm* > 1; including body effect is a reasonable refinement.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 8276,
        "total_tokens": 9866,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 8276,
        "total_tokens": 9866,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat \\(M_1\\) and \\(M_2\\) as NMOS (both sources at ground).\n\n### 1) Node equations (DC, large-signal)\nLet internal node be \\(V_X\\), output be \\(V_{out}\\).\n\n- At output node:\n\\[\n\\frac{V_{DD}-V_{out}}{R_{D1}}=I_{D1}\n\\]\n- At node \\(X\\):\n\\[\nI_{in}=I_{D2}\n\\]\n\nwith\n\\[\nI_{D1}=f_1(V_X,V_{out}),\\qquad I_{D2}=f_2(V_{out},V_X)\n\\]\n(from MOS I–V equations in cutoff/triode/sat as applicable).\n\nSo the circuit is defined by these two coupled nonlinear equations.\n\n---\n\n### 2) Qualitative operation\n- \\(M_1+R_{D1}\\) is a common-source inverting stage: larger \\(V_X\\Rightarrow\\) larger \\(I_{D1}\\Rightarrow\\) lower \\(V_{out}\\).\n- \\(M_2\\) feeds back \\(V_{out}\\) to node \\(X\\): larger \\(V_{out}\\Rightarrow\\) larger \\(I_{D2}\\Rightarrow\\) stronger pull-down of node \\(X\\).\n\nHence the loop has **regenerative (positive) feedback tendency** (two inversions around loop).  \nPractically:\n- small \\(I_{in}\\): \\(M_1\\) weak/off, \\(V_{out}\\approx V_{DD}\\)\n- large \\(I_{in}\\): \\(V_X\\) rises, \\(M_1\\) turns on, \\(V_{out}\\) drops\n- transition can be sharp; for strong loop gain it becomes bistable/hysteretic (Schmitt-like behavior).\n\n---\n\n### 3) Small-signal around a bias point\nLinearizing:\n\\[\n\\left(\\frac1{R_{D1}}+g_{o1}\\right)v_o+g_{m1}v_x=0\n\\]\n\\[\ni_{in}=g_{m2}v_o+g_{o2}v_x\n\\]\n\nSo:\n\\[\n\\frac{v_o}{i_{in}}\n=\n\\frac{1}{\ng_{m2}-\\dfrac{g_{o2}\\left(\\frac1{R_{D1}}+g_{o1}\\right)}{g_{m1}}\n}\n\\]\n\nLoop-gain form:\n\\[\nT = \\frac{g_{m1}g_{m2}}{g_{o2}\\left(\\frac1{R_{D1}}+g_{o1}\\right)}\n= g_{m1}g_{m2}r_{o2}(R_{D1}\\parallel r_{o1})\n\\]\n\n- \\(T<1\\): single stable operating point (current-to-voltage conversion).\n- \\(T\\approx 1\\): very high gain.\n- \\(T>1\\): regenerative/bistable behavior.\n\n---\n\nIf you want, I can also do a full **piecewise DC transfer** (\\(V_{out}\\) vs \\(I_{in}\\)) using square-law MOS equations and explicit region boundaries.",
        "format": "markdown",
        "sha256": "ce0b02cdf9803c50170f5b369664aec89d4a3119f78489de0f8cdfef4dd40352"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly models M2 as controlled by Vout, identifies the positive-feedback loop, and derives the loop gain consistently with the golden solution. It also recognizes the high-loop-gain bistable behavior, satisfying the full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 17177,
        "total_tokens": 19234,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16490,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 17177,
        "total_tokens": 19234,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16490,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Good circuit — it’s a **regenerative (positive-feedback) NMOS stage**.\n\nLet \\(V_o \\equiv V_{out}\\), and \\(R_D \\equiv R_{D1}\\).\n\n### 1) DC equations (general)\nAt node \\(X\\):  \n\\[\nI_{in}=I_{D2}(V_{GS2}=V_o,\\;V_{DS2}=V_x)\n\\]\n\nAt output node:  \n\\[\n\\frac{V_{DD}-V_o}{R_D}=I_{D1}(V_{GS1}=V_x,\\;V_{DS1}=V_o)\n\\]\n\nSo the operating point is found by solving these two equations together.\n\n---\n\n### 2) If both MOSFETs are in saturation (\\(\\lambda\\approx 0\\))\n\\[\nI_{D1}=\\frac{\\beta_1}{2}(V_x-V_{T1})^2,\\quad\nI_{D2}=\\frac{\\beta_2}{2}(V_o-V_{T2})^2\n\\]\n\nThen\n\\[\nV_o = V_{T2}+\\sqrt{\\frac{2I_{in}}{\\beta_2}}\n\\]\n\\[\nV_x = V_{T1}+\\sqrt{\\frac{2(V_{DD}-V_o)}{\\beta_1 R_D}}\n\\]\n\nCheck region validity:\n- \\(M_1\\) sat: \\(V_o \\ge V_x-V_{T1}\\)\n- \\(M_2\\) sat: \\(V_x \\ge V_o-V_{T2}\\)\n\nIf not valid, use triode equations for that device.\n\n---\n\n### 3) Small-signal behavior around bias\nFor \\(M_1\\):\n\\[\nv_o=-g_{m1}(R_D\\parallel r_{o1})\\,v_x \\equiv -A_1 v_x\n\\]\n\nFor node \\(X\\) (through \\(M_2\\)):\n\\[\ni_{in}=g_{o2}v_x+g_{m2}v_o\n\\]\n\nSubstitute \\(v_o\\):\n\\[\ni_{in}=\\big(g_{o2}-g_{m2}A_1\\big)v_x\n\\]\n\nSo the small-signal input resistance seen at \\(X\\) is\n\\[\nR_{in}=\\frac{v_x}{i_{in}}\n=\\frac{1}{g_{o2}-g_{m1}g_{m2}(R_D\\parallel r_{o1})}\n\\]\n\nAnd transimpedance:\n\\[\n\\frac{v_o}{i_{in}}\n=\n-\\frac{A_1}{g_{o2}-g_{m2}A_1}\n\\]\n\n---\n\n### 4) Key conclusion\nBecause \\(M_1\\) inverts (\\(v_x \\to v_o\\)) and \\(M_2\\) feeds \\(v_o\\) back into current at \\(X\\), this creates **positive feedback**.\n\n- If\n\\[\ng_{m1}g_{m2}(R_D\\parallel r_{o1}) > g_{o2},\n\\]\nthen \\(R_{in}<0\\): the node behaves like a **negative resistance** (regenerative/bistable tendency).\n- Otherwise, it behaves as a stable current-to-voltage converter.\n\n---\n\nIf you want, I can also do a full piecewise DC transfer (including triode/sat boundaries) for specific \\(V_{DD}, R_D, \\beta_1,\\beta_2,V_T\\).",
        "format": "markdown",
        "sha256": "4a153f9d070768ef8049cecc0ad5852f1670dafd318a33203e9f583d06643d41"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as driven by Vout, explains the positive-feedback loop, and derives the loop-gain-dependent input resistance. It also notes the negative-resistance/regenerative behavior when loop gain exceeds one.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2057,
        "output_tokens": 13644,
        "total_tokens": 15701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12892,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2057,
        "output_tokens": 13644,
        "total_tokens": 15701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12892,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the two NMOS as a **cross-coupled pair**:\n\n- \\(M_1\\): gate at \\(X\\), drain at \\(V_{out}\\), source at ground  \n- \\(M_2\\): gate at \\(V_{out}\\), drain at \\(X\\), source at ground  \n- \\(R_{D1}\\) pulls \\(V_{out}\\) up to \\(V_{DD}\\)\n\nSo this is a nonlinear feedback circuit (often regenerative).\n\n## 1) DC equations (general)\n\nKCL at node \\(X\\):\n\\[\nI_{in}=I_{D2}\n\\]\n\nKCL at output:\n\\[\n\\frac{V_{DD}-V_{out}}{R_{D1}}=I_{D1}\n\\]\n\nwith\n\\[\nV_{GS1}=V_X,\\quad V_{DS1}=V_{out}\n\\]\n\\[\nV_{GS2}=V_{out},\\quad V_{DS2}=V_X\n\\]\n\nUse MOS region equations (cutoff/triode/sat) for \\(I_{D1}, I_{D2}\\), then solve simultaneously.\n\n---\n\n## 2) Useful closed form (if both MOSFETs are in saturation, \\(\\lambda\\!\\approx\\!0\\))\n\n\\[\nI_{D1}=\\frac{\\beta_1}{2}(V_X-V_{T1})^2,\\qquad\nI_{D2}=\\frac{\\beta_2}{2}(V_{out}-V_{T2})^2\n\\]\n\nSo:\n\\[\nV_{out}=V_{T2}+\\sqrt{\\frac{2I_{in}}{\\beta_2}}\n\\]\n\\[\nV_X=V_{T1}+\\sqrt{\\frac{2(V_{DD}-V_{out})}{\\beta_1 R_{D1}}}\n\\]\n\nThis gives a current-to-voltage transfer (nonlinear, roughly square-root in \\(I_{in}\\)).\n\n---\n\n## 3) Small-signal around a bias point\n\n\\[\ni_{in}=g_{m2}v_{out}+g_{o2}v_X\n\\]\n\\[\n(1/R_{D1}+g_{o1})v_{out}+g_{m1}v_X=0\n\\]\n\nHence transimpedance:\n\\[\n\\frac{v_{out}}{i_{in}}\n=\n\\frac{1}{\ng_{m2}-g_{o2}\\frac{1/R_{D1}+g_{o1}}{g_{m1}}\n}\n\\]\n\nInput resistance at \\(X\\):\n\\[\nR_{in}=\\frac{v_X}{i_{in}}\n=\n\\frac{1}{\ng_{o2}-\\frac{g_{m1}g_{m2}}{1/R_{D1}+g_{o1}}\n}\n\\]\n\nIf\n\\[\ng_{m1}g_{m2}(R_{D1}\\!\\parallel r_{o1})r_{o2}>1\n\\]\nthen \\(R_{in}<0\\): regenerative/positive-feedback behavior (possible sharp switching/hysteresis).\n\n---\n\nSo, this circuit is a current-controlled nonlinear stage with cross-coupled positive feedback; depending on bias and device parameters it behaves either as a smooth transimpedance block or a regenerative switch-like element.",
        "format": "markdown",
        "sha256": "fe6ecdfa99e37eb705b227648ca62d032a8c519f14cc50242829bb3c8eb94662"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection and the positive-feedback loop, and derives the loop-gain condition for negative input resistance. Its qualified smooth-versus-regenerative conclusion is consistent with operation depending on loop gain.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2057,
        "output_tokens": 18514,
        "total_tokens": 20571,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17807,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2057,
        "output_tokens": 18514,
        "total_tokens": 20571,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17807,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1,M_2\\) are **NMOS** in saturation, \\(V_b\\) is AC-grounded, and \\(r_o\\to\\infty\\) (first-order small-signal model), this is a **shunt-feedback transimpedance amplifier**.\n\nLet:\n\n- \\(v_s\\): input/source node of \\(M_1\\) (node with \\(I_{in}\\))\n- \\(v_x\\): node \\(X\\)\n- \\(v_o \\equiv V_{out}\\)\n\n### 1) Small-signal equations\n\n\\[\ni_{in}=g_{m1}v_s+\\frac{v_s-v_o}{R_F}\n\\]\n\n\\[\nv_x=g_{m1}R_{D1}v_s\n\\]\n\n\\[\n\\frac{v_o}{R_{D2}}+g_{m2}v_x+\\frac{v_o-v_s}{R_F}=0\n\\]\n\nFrom these:\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}=\n-\\frac{R_{D2}\\left(g_{m1}g_{m2}R_{D1}R_F-1\\right)}\n{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\nand\n\n\\[\n\\boxed{\nR_{in}\\equiv \\frac{v_s}{i_{in}}=\n\\frac{1}\n{g_{m1}+\\dfrac{1+g_{m1}g_{m2}R_{D1}R_{D2}}{R_F+R_{D2}}}\n}\n\\]\n\n---\n\n### 2) Useful limits\n\n#### Open-loop (\\(R_F\\to\\infty\\))\n\\[\n\\frac{v_o}{i_{in}} \\to -g_{m2}R_{D1}R_{D2},\\qquad\nR_{in}\\to \\frac{1}{g_{m1}}\n\\]\n\n#### Strong feedback (high loop gain)\n\\[\n\\frac{v_o}{i_{in}}\\approx -R_F\n\\]\nSo output voltage is set mostly by \\(R_F\\), not transistor parameters.\n\nAlso \\(v_s\\) becomes very small (virtual ground behavior), so input impedance is very low.\n\n---\n\n### 3) Interpretation\n\n- \\(M_1\\!+\\!R_{D1}\\): converts input current to an intermediate voltage \\(v_x\\).\n- \\(M_2\\!+\\!R_{D2}\\): provides gain/inversion to create \\(v_o\\).\n- \\(R_F\\): feeds output back as a current, stabilizing gain, improving linearity, and reducing \\(R_{in}\\).\n\nIf you want, I can also include \\(r_{o1}, r_{o2}\\), output load, and pole/zero (stability/bandwidth) analysis.",
        "format": "markdown",
        "sha256": "186d4779e757895b8a43610e944d5f33e477c43d645f1fcdaae7f9a88ea470f4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly models M1 as the common-gate input device, M2 as a common-source stage driven by X, and RF as output-to-input shunt feedback. The equations, negative-feedback interpretation, low input resistance, and high-loop-gain transimpedance of approximately −RF are consistent with the circuit.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 15144,
        "total_tokens": 17422,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14511,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 15144,
        "total_tokens": 17422,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14511,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat it as a **small-signal, two-transistor shunt-feedback transimpedance amplifier** (assuming \\(M_1,M_2\\) are in saturation, \\(r_o\\to\\infty\\), and \\(V_{DD},V_b\\) are AC ground).\n\nLet:\n- \\(v_s\\): source/input node (bottom-left node),\n- \\(v_x\\): node \\(X\\),\n- \\(v_o\\): output node,\n- input current \\(i_{in}\\) injected into \\(v_s\\),\n- \\(i_{RF}=(v_o-v_s)/R_F\\) (positive in the arrow direction shown).\n\n### 1) Small-signal equations\n\\[\ng_{m1}v_s+\\frac{v_s-v_o}{R_F}=i_{in}\n\\]\n\\[\nv_x=g_{m1}R_{D1}v_s\n\\]\n\\[\n\\frac{v_o}{R_{D2}}+g_{m2}v_x+\\frac{v_o-v_s}{R_F}=0\n\\]\n\n### 2) Closed-loop transimpedance\nSolving,\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}=\n\\frac{R_{D2}\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)}\n{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\n### 3) Input resistance\n\\[\n\\boxed{\nR_{in}=\\frac{v_s}{i_{in}}=\n\\frac{R_F+R_{D2}}\n{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\n### 4) Feedback current ratio\n\\[\n\\boxed{\n\\frac{i_{RF}}{i_{in}}=\n-\\frac{1+g_{m1}g_{m2}R_{D1}R_{D2}}\n{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\n---\n\n### Key interpretation (high loop gain)\nIf\n\\[\ng_{m1}g_{m2}R_{D1}R_F\\gg 1,\\quad g_{m1}g_{m2}R_{D1}R_{D2}\\gg1,\n\\]\nthen\n\\[\n\\boxed{v_o\\approx -\\,i_{in}R_F}\n\\]\nand\n\\[\nv_s\\approx 0 \\text{ (virtual ground, very low input resistance),}\n\\]\n\\[\ni_{RF}\\approx -i_{in}\n\\]\n(negative sign because your \\(i_{RF}\\) reference arrow is opposite to actual balancing current direction).\n\nSo the circuit behaves like a **TIA whose gain is set mainly by \\(R_F\\)**, while transistor parameters mainly provide loop gain.",
        "format": "markdown",
        "sha256": "a25b3123f665e6ad205728895822f5ab4b238b6a0699c47ac01da111da2db188"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The equations correctly capture M1 as a common-gate input device, M2 as a common-source stage driven by X, and RF feedback from output to input. The resulting negative-feedback transimpedance approaches −RF with low input resistance.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2278,
        "output_tokens": 13224,
        "total_tokens": 15502,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12554,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2278,
        "output_tokens": 13224,
        "total_tokens": 15502,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12554,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Great circuit — this is a **current-input, voltage-output shunt-feedback amplifier** (a transimpedance stage).\n\nLet:\n\n- \\(v_s\\): input node voltage (source of \\(M_1\\), where \\(I_{in}\\) is injected)\n- \\(v_x\\): node \\(X\\)\n- \\(v_o\\): \\(V_{out}\\)\n\nAssume small-signal, \\(V_{DD}\\) and \\(V_b\\) are AC grounds, \\(M_1,M_2\\) in saturation, and first ignore \\(r_o\\).\n\n---\n\n### 1) Small-signal equations\n\nFor \\(M_1\\) (common-gate behavior):\n\\[\nv_x = g_{m1}R_{D1}\\,v_s\n\\]\n\nInput-node KCL:\n\\[\ni_{in}=g_{m1}v_s+\\frac{v_s-v_o}{R_F}\n\\]\n\nOutput-node KCL:\n\\[\n\\left(\\frac1{R_{D2}}+\\frac1{R_F}\\right)v_o+g_{m2}v_x-\\frac{v_s}{R_F}=0\n\\]\n\nSubstitute \\(v_x\\), solve:\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}\n=\n\\frac{R_{D2}\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)}\n{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\nThis is the exact (with \\(r_o\\to\\infty\\)) transimpedance.\n\n---\n\n### 2) Input resistance\n\n\\[\n\\boxed{\nR_{in} \\equiv \\frac{v_s}{i_{in}}\n=\n\\frac{R_F+R_{D2}}\n{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\nSo feedback strongly lowers input impedance (good for current sensing).\n\n---\n\n### 3) Useful high-gain approximation\n\nIf loop gain is large (\\(g_{m1}R_F\\gg1\\), and \\(g_{m2}R_{D1}R_{D2}\\gg R_F+R_{D2}\\)):\n\n\\[\n\\boxed{v_o \\approx -\\,i_{in}R_F}\n\\]\n\\[\nv_s \\approx 0 \\quad (\\text{virtual ground at input})\n\\]\n\nSo magnitude of feedback current is about input current:\n\\[\n|i_{RF}| \\approx |i_{in}|\n\\]\n(sign depends on your arrow convention).\n\n---\n\n### 4) Interpretation\n\n- \\(M_1+R_{D1}\\): converts input-node voltage disturbance to gain node \\(v_x\\).\n- \\(M_2+R_{D2}\\): inverting gain stage.\n- \\(R_F\\): shunt feedback that sets closed-loop transimpedance mostly by \\(R_F\\), not transistor parameters (for high gain).\n\nIf you want, I can also include finite \\(r_{o1}, r_{o2}\\) and derive the corrected expression.",
        "format": "markdown",
        "sha256": "ba0f967d99ed915d6f644f5408ec96060b9a9f68af4b73bc2c4fef9e544d9568"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node in a transimpedance amplifier. The negative transimpedance and lowered input resistance are also consistent with the golden solution.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2278,
        "output_tokens": 12872,
        "total_tokens": 15150,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12174,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2278,
        "output_tokens": 12872,
        "total_tokens": 15150,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12174,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the MOS connections are as drawn:\n\n- \\(M_1\\): NMOS, gate at \\(V_b\\), between \\(V_{out}\\) and lower node \\(V_X\\)  \n- \\(M_2\\): PMOS, source at \\(V_{DD}\\), drain at \\(V_X\\), gate at \\(V_{out}\\)  \n- unlabeled bottom current source = bias sink \\(I_B\\)\n\n---\n\n### 1) DC (large-signal) equations\n\nLet \\(V_X\\) be the bottom node (where \\(I_{in}\\) is injected).\n\nAt node \\(V_{out}\\):\n\\[\nI_{D1}=I_1 \\quad (\\text{no external load})\n\\]\n\nAt node \\(V_X\\):\n\\[\nI_B = I_{in}+I_{D1}+I_{D2}\n\\;\\Rightarrow\\;\nI_{D2}=I_B-I_1-I_{in}\n\\]\n\nSo input current directly changes \\(M_2\\) current.\n\nIf both devices are in saturation (long-channel square law, \\(\\lambda\\approx 0\\)):\n\n\\[\nI_1=\\frac{\\beta_1}{2}(V_b-V_X-V_{TN1})^2\n\\Rightarrow\nV_X=V_b-V_{TN1}-\\sqrt{\\frac{2I_1}{\\beta_1}}\n\\]\n\n\\[\nI_{D2}=\\frac{\\beta_2}{2}(V_{DD}-V_{out}-|V_{TP2}|)^2\n\\]\n\nHence:\n\\[\n\\boxed{\nV_{out}=V_{DD}-|V_{TP2}|-\\sqrt{\\frac{2\\,(I_B-I_1-I_{in})}{\\beta_2}}\n}\n\\]\n\nSo \\(I_{in}\\uparrow \\Rightarrow I_{D2}\\downarrow \\Rightarrow V_{out}\\uparrow\\).\n\n---\n\n### 2) Small-signal result (key)\n\nAround a bias point:\n\\[\n\\Delta I_{D2}=-\\Delta I_{in}\n\\]\nand for PMOS:\n\\[\n\\Delta I_{D2}=-g_{m2}\\Delta V_{out}\n\\]\n(using \\(g_{m2}\\) as magnitude)\n\nSo:\n\\[\n\\boxed{\\frac{\\Delta V_{out}}{\\Delta I_{in}}\\approx \\frac{1}{g_{m2}}}\n\\]\n(current-to-voltage conversion).\n\nWith finite \\(r_o\\), a more complete result is still close to \\(1/g_{m2}\\), and the lower node \\(V_X\\) becomes very low impedance:\n\\[\nR_{in,X}\\approx \\frac{1}{g_{m2}(1+g_{m1}r_{o1})}\n\\approx \\frac{1}{g_{m1}g_{m2}r_{o1}}\n\\]\n(if \\(g_{m1}r_{o1}\\gg 1\\)).\n\n---\n\n### 3) Interpretation\n\nThis is a local-feedback current-mode stage (FVF-like behavior):  \ninput current at \\(V_X\\) is translated into output voltage at \\(V_{out}\\), with feedback keeping \\(V_X\\) relatively stiff (low impedance).\n\n---\n\nIf you want, I can also derive the saturation/compliance limits for \\(I_{in}\\) and \\(V_{out}\\) explicitly.",
        "format": "markdown",
        "sha256": "cc0197d725346e74d507501f0c84c6c5eaf7c96b636db1817935df40c49d0c6a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device and PMOS feedback device driven by Vout, describes feedback to the input node, and gives the expected very low input resistance and transimpedance of approximately 1/gm2. The optional large-signal discussion does not undermine the essential analysis.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 21229,
        "total_tokens": 23396,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20510,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 21229,
        "total_tokens": 23396,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20510,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let the lower common node be \\(V_X\\), and call the **unlabeled downward current source** at that node \\(I_B\\) (bias sink).  \nAssume long-channel MOS, both transistors in saturation, ideal current sources.\n\n### 1) Node equations\n\nAt \\(V_{out}\\): only \\(I_1\\) and \\(M_1\\) are connected (ignoring load), so\n\\[\nI_{D1}=I_1.\n\\]\n\nIf \\(M_1\\) is NMOS with gate at \\(V_b\\):\n\\[\nI_1=\\frac{\\beta_1}{2}(V_b-V_X-V_{TN})^2\n\\quad\\Rightarrow\\quad\nV_X=V_b-V_{TN}-\\sqrt{\\frac{2I_1}{\\beta_1}}.\n\\]\nSo \\(V_X\\) is (approximately) fixed by \\(I_1\\) and \\(V_b\\).\n\nAt node \\(V_X\\):\n\\[\nI_B = I_{in}+I_{D1}+I_{D2}\n\\]\n\\[\n\\Rightarrow\\quad I_{D2}=I_B-I_{in}-I_1.\n\\]\n\nIf \\(M_2\\) is PMOS (source at \\(V_{DD}\\), gate at \\(V_{out}\\)):\n\\[\nI_{D2}=\\frac{\\beta_2}{2}\\big(V_{DD}-V_{out}-|V_{TP}|\\big)^2\n\\]\n\\[\n\\Rightarrow\\quad\nV_{out}=V_{DD}-|V_{TP}|-\\sqrt{\\frac{2\\,(I_B-I_{in}-I_1)}{\\beta_2}}.\n\\]\n\n---\n\n### 2) What this means\n\n- \\(M_1+I_1\\) regulate \\(V_X\\) (low-ish input-node voltage variation).\n- \\(I_{in}\\) is converted to \\(V_{out}\\) through \\(M_2\\):\n  - increasing \\(I_{in}\\) reduces \\(I_{D2}\\),\n  - so \\(V_{out}\\) must rise (for PMOS \\(M_2\\)).\n\nSmall-signal:\n\\[\n\\frac{dv_{out}}{di_{in}} \\approx \\frac{1}{g_{m2}}\n\\]\n(sign consistent with the current direction drawn for \\(I_{in}\\): upward \\(I_{in}\\) gives upward \\(V_{out}\\)).\n\n---\n\n### 3) Validity / saturation constraints\n\nNeed:\n\\[\nI_B>I_{in}+I_1,\n\\]\n\\[\nV_{out}-V_X\\ge V_{OV1}\\quad(M_1\\ \\text{saturation}),\n\\]\n\\[\nV_{DD}-V_X\\ge V_{OV2}\\quad(M_2\\ \\text{saturation}).\n\\]\n\nSo this is essentially a **current-to-voltage conversion cell with local MOS feedback**.",
        "format": "markdown",
        "sha256": "a9952afb3e5b1683f66a8c0ab64c306556821dd55f7351045a2a48e4bb2892e4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS and the PMOS controlled by Vout whose current feeds back to the input node. The current balance gives the correct polarity and vout/iin ≈ 1/gm2; the idealized bias equations are consistent with the circuit.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 12368,
        "total_tokens": 14535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11738,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 12368,
        "total_tokens": 14535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11738,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume the devices are as drawn ( \\(M_1\\) = NMOS, \\(M_2\\) = PMOS), both in saturation, with the lower unlabeled source as a bias sink \\(I_B\\).\n\nLet:\n\n- \\(V_X\\): lower node (where \\(I_{in}\\) is injected)\n- \\(V_Y = V_{out}\\): middle node (drain of \\(M_1\\), gate of \\(M_2\\))\n\nThis is a **flipped-voltage-follower (FVF)-type current-to-voltage stage**.\n\n---\n\n### 1) DC equations\n\n#### Node \\(V_Y\\):\nOnly \\(I_1\\) and \\(M_1\\) are connected (MOS gate current is ~0), so\n\n\\[\nI_{D1}=I_1\n\\]\n\nHence \\(M_1\\)'s \\(V_{GS1}\\) is set by \\(I_1\\), and \\(V_X\\) is approximately fixed:\n\n\\[\nV_X \\approx V_b - V_{GS1}\n\\]\n\\[\nV_{GS1}=V_{TN}+\\sqrt{\\frac{2I_1}{\\beta_1}}\n\\]\n\nSo \\(V_X\\) is a quasi-constant low-impedance node.\n\n#### Node \\(V_X\\):\nKCL gives\n\n\\[\nI_B = I_{in} + I_1 + I_{D2}\n\\quad\\Rightarrow\\quad\nI_{D2}=I_B-I_1-I_{in}\n\\]\n\nFor PMOS \\(M_2\\) (sat, long-channel):\n\n\\[\nI_{D2}=\\frac{\\beta_2}{2}(V_{SG2}-|V_{TP}|)^2\n,\\quad\nV_{SG2}=V_{DD}-V_{out}\n\\]\n\nSo:\n\n\\[\nV_{out}\n=\nV_{DD}\n-\n\\left(\n|V_{TP}|+\\sqrt{\\frac{2(I_B-I_1-I_{in})}{\\beta_2}}\n\\right)\n\\]\n\nSo \\(V_{out}\\) is set by \\(I_{in}\\).\n\n---\n\n### 2) Small-signal behavior\n\nAround bias:\n\n\\[\n\\Delta I_{D2} = -\\Delta I_{in}\n\\]\n\nand for PMOS:\n\n\\[\n\\Delta I_{D2} \\approx -g_{m2}\\Delta V_{out}\n\\]\n\nTherefore:\n\n\\[\n\\boxed{\\frac{\\Delta V_{out}}{\\Delta I_{in}} \\approx \\frac{1}{g_{m2}}}\n\\]\n\nSo it acts as a **current-to-voltage converter** (transimpedance \\(\\approx 1/g_{m2}\\), sign per your \\(I_{in}\\) direction convention).\n\nInput-node resistance at \\(V_X\\) is low (due to local feedback through \\(M_1\\)-\\(M_2\\)), approximately:\n\n\\[\nR_{in,X}\\approx \\frac{1}{g_{m2}(1+g_{m1}r_{o1})}\n\\approx \\frac{1}{g_{m1}g_{m2}r_{o1}}\n\\]\n\n---\n\n### 3) Interpretation\n\n- \\(M_1\\) + \\(I_1\\) set/clamp \\(V_X\\) (low-\\(Z\\) node).\n- \\(I_{in}\\) is absorbed by changing \\(M_2\\) current.\n- \\(V_{out}\\) moves to adjust \\(M_2\\) current accordingly.\n- Dynamic range is limited by keeping \\(M_1, M_2\\) in saturation and \\(I_B-I_1-I_{in}\\ge 0\\) (for \\(M_2\\) on).\n\nIf you want, I can also draw the full small-signal equivalent and derive \\(R_{in}\\) and \\(V_{out}/I_{in}\\) with finite \\(r_o\\) for all elements.",
        "format": "markdown",
        "sha256": "dd3515833560c5095a2a912d4bbf2b327903b70511a56f1c2fe2029f39818cea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS input device and PMOS feedback device, captures how Vout controls current returned to the input node, and gives the expected low input resistance and transimpedance. The FVF label is imprecise, but the circuit analysis reflects the correct feedback behavior.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 14124,
        "total_tokens": 16291,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13283,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 14124,
        "total_tokens": 16291,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13283,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Great question.\n\n**Short answer:**  \n- **For any finite (even very large) \\(C_L\\):** it can still oscillate (assuming inverter gain is sufficient).  \n- **In the limit \\(C_L \\to \\infty\\):** oscillation frequency goes to zero, so effectively it no longer oscillates.\n\nFor a 3-stage ring oscillator, stage delay grows roughly as \\(t_d \\propto C_L\\), and\n\\[\nf_{osc} \\approx \\frac{1}{2N t_d} \\propto \\frac{1}{C_L}, \\quad (N=3)\n\\]\nSo bigger capacitors just make it slower and slower. Startup also gets slower (can become impractically long).\n\nSo there is **no finite “too large” cap that suddenly kills oscillation** in the ideal model; but with real nonidealities (leakage, limited gain, noise, supply limits), very large \\(C_L\\) can make it appear not to start.",
        "format": "markdown",
        "sha256": "50cc262d5874ccc58f3e7c196c955e859ca1f48f3266920139fdadd1728c0758"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that any finite, arbitrarily large capacitance slows the ring without stopping oscillation, and supports this with the delay and frequency scaling. The zero-frequency infinite-capacitance limit is a compatible limiting caveat.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2023,
        "output_tokens": 5685,
        "total_tokens": 7708,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5469,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2023,
        "output_tokens": 5685,
        "total_tokens": 7708,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5469,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For a **3-inverter ring oscillator**, making all three load capacitors larger mainly does one thing: it increases each stage delay.\n\n\\[\nf_{\\text{osc}} \\approx \\frac{1}{2N t_p}, \\quad N=3,\\quad t_p \\propto C_L\n\\]\nSo:\n\\[\nf_{\\text{osc}} \\propto \\frac{1}{C_L}\n\\]\n\nSo for any **finite** (even very large) \\(C_L\\), it should still oscillate (assuming the inverters have enough gain/drive), just much more slowly.\n\n- **No abrupt “too-large-\\(C\\)” stop point** in the ideal model.\n- In the strict limit \\(C_L \\to \\infty\\), \\(f \\to 0\\): effectively no oscillation (infinite period / infinite startup time).\n- In real hardware, very large \\(C_L\\) may *appear* not to oscillate because startup becomes extremely slow and leakage/nonidealities dominate.",
        "format": "markdown",
        "sha256": "aeda166c7f4852ce76c26ac50aae8706e242f2959fe383d1641966e8ef979bdb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that increasing all three capacitances increases delay and lowers frequency, while the ring continues to oscillate for any finite capacitance. The zero-frequency infinite-capacitance limit is a reasonable caveat and does not change the main conclusion.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2023,
        "output_tokens": 5294,
        "total_tokens": 7317,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5076,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2023,
        "output_tokens": 5294,
        "total_tokens": 7317,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5076,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: **for any finite \\(C_L\\), it should still oscillate** (assuming normal inverter gain), just at a much lower frequency.\n\n- This is a 3-stage ring oscillator.\n- Stage delay grows with load capacitance: \\(t_{pd}\\propto C_L\\).\n- Oscillation frequency is roughly  \n  \\[\n  f \\approx \\frac{1}{2N t_{pd}}=\\frac{1}{6t_{pd}} \\propto \\frac{1}{C_L}.\n  \\]\nSo as \\(C_L\\) gets very large, \\(f\\) gets very small.\n\nSo it doesn’t “suddenly fail” because \\(C_L\\) is large; it just becomes very slow and startup takes longer.  \nOnly in the **ideal limit** \\(C_L\\to\\infty\\) (or practically when leakage/nonideal effects dominate over the very long period) it effectively stops oscillating.",
        "format": "markdown",
        "sha256": "3b394da62f372a1011180c2e25dcef468bab655e3b551142ad265d1435ac28ee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says that for any finite load capacitance the ring continues oscillating at a lower frequency, supported by the valid delay-scaling argument. The infinite-capacitance caveat does not undermine the answer.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2023,
        "output_tokens": 4925,
        "total_tokens": 6948,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4722,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2023,
        "output_tokens": 4925,
        "total_tokens": 6948,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4722,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the inverters/bias stay the same (only \\(C_L\\) at each node is doubled):\n\n1. **Stage delay doubles** \\((t_d \\propto C_L)\\), so  \n2. **Oscillation frequency halves** \\((f_0 \\propto 1/C_L)\\).\n\nFor ring oscillators, white-noise phase noise at a fixed absolute offset \\(\\Delta f\\) scales roughly as\n\n\\[\nL(\\Delta f) \\propto \\left(\\frac{f_0}{\\Delta f}\\right)^2\n\\]\n\n(and power is approximately unchanged since \\(P \\sim C_L V^2 f_0\\)).\n\nSo with \\(f_0 \\to f_0/2\\), phase noise becomes:\n\n\\[\nL_{\\text{new}} \\approx \\frac{1}{4} L_{\\text{old}}\n\\]\n\ni.e. **about 6 dB better (more negative dBc/Hz)** at the same \\(\\Delta f\\).\n\n> Caveat: at the same **fractional** offset \\((\\Delta f/f_0)\\), it is roughly unchanged.",
        "format": "markdown",
        "sha256": "3414c2d5bb40d52c6db1ed51237d41584af329e0c73f36f84614a875e09fd4ef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling the capacitors halves the oscillation frequency, yielding about a fourfold (6 dB) phase-noise reduction at fixed absolute offset, while noting the fixed-relative-offset exception.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 6593,
        "total_tokens": 8613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6349,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 6593,
        "total_tokens": 8613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6349,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the inverter noise/current drive stays the same:\n\n- Doubling each \\(C_L\\) doubles each stage delay \\(\\tau_d\\), so \\(f_0\\) is roughly halved.\n- For a ring oscillator, the white-noise phase noise at a **fixed absolute offset** \\(\\Delta f\\) scales like\n  \\[\n  \\mathcal{L}(\\Delta f)\\propto \\frac{1}{C_L^2}\n  \\]\n  (equivalently \\(\\propto f_0^2\\) when power is unchanged).\n\nSo if all three capacitors are doubled, phase noise becomes about **4× lower** (about **6 dB improvement**) at the same \\(\\Delta f\\) in Hz.\n\n(At the same *normalized* offset \\(\\Delta f/f_0\\), it is approximately unchanged.)",
        "format": "markdown",
        "sha256": "3da03f1f6a16920452377d8750640861652149fb7e9e84e3bb1b8c66921f01f9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling the capacitors roughly halves the oscillation frequency, giving about a fourfold (6 dB) phase-noise reduction at fixed absolute offset, and notes the unchanged result at fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2020,
        "output_tokens": 5986,
        "total_tokens": 8006,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5800,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2020,
        "output_tokens": 5986,
        "total_tokens": 8006,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5800,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this 3-stage ring oscillator, if each \\(C_L\\) is doubled (and nothing else changes):\n\n- Stage delay \\(\\propto C_L\\) doubles  \n- Oscillation frequency halves\n\nPhase noise from thermal device noise scales roughly as\n\\[\nL(\\Delta f)\\propto \\frac{1}{(C_L V_{\\text{swing}})^2}\n\\]\n(or equivalently \\(\\propto f_0^2\\) at fixed power), so doubling \\(C_L\\) gives about **4× lower phase-noise power**:\n\n\\[\n\\boxed{\\text{Phase noise improves by } \\approx 6\\ \\text{dB (at a fixed offset in Hz).}}\n\\]\n\n(If compared at the same **fractional** offset \\(\\Delta f/f_0\\), it is roughly unchanged.)",
        "format": "markdown",
        "sha256": "65de012498476e4c9006393097fb606b3848ca45b637e8334f18751570496088"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and gives about 6 dB (fourfold) lower phase noise at fixed offset, while noting it is unchanged at fixed fractional offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2020,
        "output_tokens": 5292,
        "total_tokens": 7312,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5111,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2020,
        "output_tokens": 5292,
        "total_tokens": 7312,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5111,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Great question. **Nuanced answer:**\n\n- **Idealized ring-oscillator model (digital delay elements):**  \n  It will still oscillate for any **finite** \\(C_L\\); frequency just gets lower as \\(C_L\\) increases.  \n  In the limit \\(C_L \\to \\infty\\), frequency \\(\\to 0\\), so effectively it stops.\n\n- **Real CMOS inverters (finite gain/drive):**  \n  If \\(C_L\\) is made very large, one stage becomes a very slow dominant pole, and loop gain at the required phase shift can drop below 1. Then startup can fail and the loop may settle near a metastable DC point (around mid-rail).  \n  So **practically, yes, there is a maximum usable \\(C_L\\)**.\n\nSo: **ideal theory says “no (until infinite \\(C_L\\)),” practical silicon says “yes, too large \\(C_L\\) can kill oscillation.”**",
        "format": "markdown",
        "sha256": "3a3058bb976a1029a38e1e95bca41c5629e1ed4e9a7f427fe009c59d9e1fa8f9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that a sufficiently large load on one node can stop oscillation, and explains the dominant-pole, loop-gain, and DC-settling mechanism. The idealized-model caveat does not undermine the answer for the real circuit.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 10125,
        "total_tokens": 12145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9911,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 10125,
        "total_tokens": 12145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9911,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: **it depends on the model**.\n\n- **Ideal digital-delay model:** it still oscillates for any finite \\(C_L\\); the frequency just drops (\\(f \\propto 1/C_L\\)). In the limit \\(C_L \\to \\infty\\), \\(f \\to 0\\), so effectively no oscillation.\n- **Real CMOS/transistor model:** there is a **finite maximum \\(C_L\\)** beyond which oscillation stops. The loaded node becomes so slow that the other two inverters track it quasi-statically, loop gain/phase no longer satisfy oscillation conditions, and the loop settles near a DC point (around mid-supply).\n\nSo practically: **yes, if \\(C_L\\) is made arbitrarily large, the oscillator can fail (and at \\(C_L=\\infty\\), it definitely cannot oscillate).**",
        "format": "markdown",
        "sha256": "4651abbd9a246aedfded794935d4800733a13f76273331ff4feb6848910eac66"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large load capacitance can stop oscillation and explains that the loaded node becomes slow, causing the loop to settle near a DC point rather than sustain oscillation. The ideal-delay-model caveat does not contradict the essential conclusion.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2020,
        "output_tokens": 12409,
        "total_tokens": 14429,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12222,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2020,
        "output_tokens": 12409,
        "total_tokens": 14429,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12222,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: **in a real circuit, yes—eventually it can stop oscillating if \\(C_L\\) is made too large.**\n\nWhy:\n\n- This is a 3-inverter ring oscillator (odd inversion, feedback).\n- Increasing \\(C_L\\) increases the delay of that one stage, so initially the oscillation frequency just drops.\n- But if \\(C_L\\) keeps increasing, that stage’s pole moves very low and its AC gain at the required phase-shift frequency falls roughly as \\(1/C_L\\).\n- At some point, loop gain at the oscillation frequency drops below 1, so startup/sustained oscillation fails.\n\nSo:\n\n- **Finite but moderate \\(C_L\\):** oscillates slower.\n- **Very large \\(C_L\\):** may fail to oscillate (real inverters, finite gain/bandwidth).\n- **Idealized infinite-gain digital inverter model:** it would still oscillate for any finite \\(C_L\\), with frequency tending toward 0; at \\(C_L=\\infty\\), no oscillation.",
        "format": "markdown",
        "sha256": "3628dc86c40a5e47e6fe7f73ad773d2160a877e053423a1cb8f92d25791bd111"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large loading on one node can stop oscillation and explains the dominant-pole gain roll-off that undermines the loop condition. The idealized-model caveat does not undermine the essential answer.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2020,
        "output_tokens": 14422,
        "total_tokens": 16442,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14193,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2020,
        "output_tokens": 14422,
        "total_tokens": 16442,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14193,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this **CMOS ring oscillator**, doubling both NMOS and PMOS widths (keeping \\(L\\), \\(V_{DD}\\), and stage count the same) gives, to first order:\n\n- \\(I_{\\text{drive}} \\uparrow \\approx 2\\times\\)\n- Node/gate capacitances \\(\\uparrow \\approx 2\\times\\)\n\nSo stage delay \\(t_d \\sim \\dfrac{C V}{I}\\) stays about the same, hence \\(f_{osc}\\) is roughly unchanged.\n\nFor phase noise, the usual first-order result is:\n\\[\n\\mathcal{L}(\\Delta f) \\propto \\frac{kT}{P}\n\\]\nand power \\(P\\) roughly doubles, so phase noise power is cut in half:\n\n\\[\n\\text{phase noise improvement} \\approx 3\\ \\text{dB}\n\\]\n\nSo the phase noise gets **better (about 3 dB lower)**, at the cost of about **2× power and area**.",
        "format": "markdown",
        "sha256": "d2c7b536d8fd6a1054efebd7af461c17d54b402bada14e3c712d6c33973996ee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts about a 3 dB phase-noise reduction and gives a consistent first-order scaling: drive current and capacitance both double, keeping frequency roughly constant, while power doubles.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3103,
        "output_tokens": 4281,
        "total_tokens": 7384,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3103,
        "output_tokens": 4281,
        "total_tokens": 7384,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this CMOS ring oscillator, **doubling both NMOS and PMOS widths generally improves (reduces) phase noise**.\n\nFirst-order scaling (same \\(V_{DD}\\), same \\(L\\), same topology):\n\n- \\(I_{\\text{drive}} \\uparrow \\approx 2\\times\\)\n- Node capacitance \\(C \\uparrow \\approx 2\\times\\)\n- So delay (and oscillation frequency) stays roughly similar (\\(t_d \\sim C/I\\))\n- Timing uncertainty per edge drops (\\(\\sigma_t \\propto 1/\\sqrt{W}\\))\n\nSo phase-noise power (or jitter variance) improves by about **2×**, i.e. roughly **3 dB lower phase noise**.\n\n⚠️ But power also rises about **2×**, so oscillator FoM is often about the same (you pay power for that noise improvement).",
        "format": "markdown",
        "sha256": "4e1f56b401db2533eabee02a0593aaf23fbac4da8bedfd148fe3b24ff3d9b254"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts about a 3 dB phase-noise reduction and gives a consistent first-order scaling explanation; the power tradeoff is also noted.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 3103,
        "output_tokens": 3754,
        "total_tokens": 6857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3564,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 3103,
        "output_tokens": 3754,
        "total_tokens": 6857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3564,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this **CMOS ring oscillator** (all stages scaled together), doubling both NMOS and PMOS widths typically gives:\n\n- \\(g_m \\uparrow\\) ~2× and switching current \\(\\uparrow\\) ~2×  \n- Node capacitances/load \\(\\uparrow\\) ~2×  \n- So stage delay \\(t_d \\sim C/I\\) stays about the same \\(\\Rightarrow f_{osc}\\) roughly unchanged\n\nNoise-wise, the larger devices reduce equivalent voltage/timing noise per transition, so the **phase noise improves (goes lower)** by about **2× in power**, i.e. roughly **3 dB better** (more negative dBc/Hz), ideally.\n\nSo: **phase noise gets better by ~3 dB, at the cost of ~2× power/area** (FoM roughly unchanged).",
        "format": "markdown",
        "sha256": "597a006463209b0b2fc113bda7f6f9d13d3c0c49c890c789be1214865f5f6073"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts about a 3 dB phase-noise reduction and gives the valid width-scaling trend: drive current and node capacitance both roughly double, leaving frequency about unchanged. The noise explanation is consistent with reduced node-voltage/timing noise.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 3103,
        "output_tokens": 3678,
        "total_tokens": 6781,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3494,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 3103,
        "output_tokens": 3678,
        "total_tokens": 6781,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3494,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the supply port, use the **incremental (small-signal) resistance** definition:\n\n\\[\nR_x=\\left(\\frac{dI_{DD}}{dV_{DD}}\\right)^{-1}.\n\\]\n\nFor a 3-stage CMOS ring oscillator, each stage draws charge \\(Q=C_LV_{DD}\\) from the supply once per cycle, so\n\n\\[\nI_{DD}=3\\,C_L\\,V_{DD}\\,f_{osc}(V_{DD}).\n\\]\n\nHence\n\n\\[\n\\boxed{\nR_x=\n\\frac{1}{3C_L\\left(f_{osc}+V_{DD}\\frac{df_{osc}}{dV_{DD}}\\right)}\n}\n\\]\n\n(general low-frequency small-signal result).\n\nIf \\(f_{osc}\\) is taken approximately constant for small \\(V_{DD}\\) perturbations, this reduces to\n\n\\[\n\\boxed{R_x \\approx \\frac{1}{3C_L f_{osc}}}\n\\]\n\n(a positive resistance).",
        "format": "markdown",
        "sha256": "e4dc89bce562ed4fec13da63d14df2581c62e4cf279e4dd5f17095e0eff68c3a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies oscillation-driven charging of the three load capacitances and derives the supply current. It gives the fixed-frequency result and a consistent refinement accounting for the dependence of oscillation frequency on supply voltage.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3099,
        "output_tokens": 11330,
        "total_tokens": 14429,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11112,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3099,
        "output_tokens": 11330,
        "total_tokens": 14429,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11112,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming identical CMOS inverter stages and neglecting leakage/short-circuit DC terms:\n\n- Each stage draws charge \\(Q = C_L V_{DD}\\) from the supply once per oscillation cycle.\n- For a 3-stage ring, average supply current is\n\\[\nI_{DD}=3\\,C_L\\,V_{DD}\\,f_{osc}.\n\\]\n\nSo the small-signal input resistance at the supply node is\n\\[\nr_x=\\left(\\frac{dI_{DD}}{dV_{DD}}\\right)^{-1}\n=\\frac{1}{3C_L\\left(f_{osc}+V_{DD}\\frac{df_{osc}}{dV_{DD}}\\right)}.\n\\]\n\nIf you ignore the \\(f_{osc}\\)-vs-\\(V_{DD}\\) dependence for the perturbation (common first-order approximation), then\n\\[\n\\boxed{r_x \\approx \\frac{1}{3C_L f_{osc}}}\n\\]\n(and since \\(f_{osc}=1/(6t_d)\\), this is also \\(r_x \\approx 2t_d/C_L\\)).  \n\nSo the oscillator looks like a **positive** resistance at its supply node.",
        "format": "markdown",
        "sha256": "2c0ec42b1bdb691a6c4bd3a4e69d4e0a6663d1673e26f286a3b4090e0616a10f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies oscillation-driven charging of the three load capacitances and derives the fixed-frequency result, while also noting the frequency-dependence refinement.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 3099,
        "output_tokens": 10313,
        "total_tokens": 13412,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10057,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 3099,
        "output_tokens": 10313,
        "total_tokens": 13412,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10057,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the 3-stage CMOS ring as a **dynamic (switched-capacitor) load** on \\(V_{DD}\\).\n\nIf each inverter output has effective load capacitance \\(C_L\\):\n\n- Each stage is charged from 0 to \\(V_{DD}\\) once per oscillation period.\n- Charge drawn from supply per period per stage: \\(Q_1 = C_L V_{DD}\\).\n- For 3 stages: \\(Q_{\\text{tot}} = 3C_L V_{DD}\\).\n\nSo average supply current is\n\\[\nI_{DD}=Q_{\\text{tot}} f_{osc}=3C_LV_{DD}f_{osc}.\n\\]\n\nHence the small-signal conductance (first-order, with \\(f_{osc}\\) held constant) is\n\\[\ng_x=\\frac{dI_{DD}}{dV_{DD}}\\approx 3C_L f_{osc},\n\\]\nand the resistance looking into the supply node is\n\\[\n\\boxed{R_x \\approx \\frac{1}{3C_L f_{osc}}=\\frac{V_{DD}}{I_{DD}}.}\n\\]\n\n(If you include frequency pushing with supply, use \\(R_x^{-1}=3C_L\\!\\left[f_{osc}+V_{DD}\\frac{df_{osc}}{dV_{DD}}\\right]\\).)",
        "format": "markdown",
        "sha256": "ab3b0543fb8f37452988ffe908df10462d495a1a64092321fd3c332a0f06b7b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies oscillation-driven charging of the three load capacitances and derives the expected fixed-frequency result, with an appropriate expression for frequency dependence on supply.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 3099,
        "output_tokens": 8458,
        "total_tokens": 11557,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8165,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 3099,
        "output_tokens": 8458,
        "total_tokens": 11557,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8165,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — **it changes** (or more precisely, the simple constant \\(R_X\\) no longer exists).\n\n\\[\nR_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n\\]\nis valid when you linearize around the **DC metastable point** (all three node voltages equal), so each inverter has \\(V_{in}=V_{out}\\) and looks like two diode-connected devices in series.\n\nWhen the ring is actually oscillating:\n\n- \\(V_{in}\\neq V_{out}\\) for each inverter (phase-shifted waveform),\n- devices move through cutoff/triode/sat over the cycle,\n- supply current is pulsed (charging/discharging + short-circuit overlap current).\n\nSo the supply “resistance” is now **time-varying and frequency-dependent** (LPTV behavior), not a single resistor.  \nIf you need one number, use an averaged incremental value:\n\\[\nR_{\\text{eff}}=\\left(\\frac{d\\overline{I_{DD}}}{dV_{DD}}\\right)^{-1}\n\\]\nwhich is generally different (often much larger) than the diode-connected expression.\n\nSo: **the quoted result is a startup/metastable small-signal result, not the running-oscillation result.**",
        "format": "markdown",
        "sha256": "c71777fdc398356fdb7b451534035a63941e7dcbbf37363cb33bf67215c4d91e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly distinguishes the DC metastable small-signal result from oscillation, but misses the capacitive charging mechanism and incorrectly suggests the effective resistance is often much larger; the golden solution says it remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3179,
        "output_tokens": 6461,
        "total_tokens": 9640,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6171,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3179,
        "output_tokens": 6461,
        "total_tokens": 9640,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6171,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — **once it is oscillating, that simple \\(R_X\\) expression is no longer generally valid**.\n\n\\[\nR_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n\\]\nassumes a **static bias point** where each inverter sits near its switching point (so NMOS/PMOS both on and “diode-connected-like”).\n\nIn steady oscillation, the ring is a **large-signal, time-varying** system:\n\n- each inverter spends most of the time with one device off,\n- both-on (“diode-connected”) behavior happens only during brief transitions,\n- supply current is pulsed (charging/discharging + short-circuit overlap), not constant.\n\nSo the supply “resistance” is not a single constant; it is a **periodic/frequency-dependent impedance**.  \nIf you want a low-frequency equivalent, use:\n\\[\nR_{\\text{eq,LF}}=\\left(\\frac{d I_{DD,\\text{avg}}}{d V_{DD}}\\right)^{-1},\n\\]\nwhich is usually **much larger** than the static \\( (1/3)(1/g_{mn}+1/g_{mp}) \\) value for a rail-to-rail ring oscillator.\n\nSo: **yes, oscillation changes the answer (often a lot).**",
        "format": "markdown",
        "sha256": "4145be6ae521a86bb4593360fedbb75d9876fd1c2ac0b480c9675681343a12fa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that oscillation invalidates the static device model and mentions capacitive charging, but concludes that the equivalent resistance is much larger because devices are off. The key result is that capacitive charging sets RX while keeping it on the order of the MOS on-resistance, not much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 3179,
        "output_tokens": 7020,
        "total_tokens": 10199,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6727,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 3179,
        "output_tokens": 7020,
        "total_tokens": 10199,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6727,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—**if it is actually oscillating, that \\(\\;R_X\\;\\) expression is no longer the right model**.\n\n\\[\nR_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n\\]\nis a **DC small-signal** result around the metastable bias point (all inverter nodes near switching threshold), where each inverter can be approximated as a PMOS/NMOS diode-connected stack.\n\nIn oscillation:\n\n- there is no single DC operating point (it’s a periodic large-signal trajectory),\n- \\(v_{in}\\neq v_{out}\\) for each inverter (phase-shifted), so “diode-connected” is not valid,\n- device \\(g_m\\)’s and conduction states vary over time.\n\nSo the supply port is a **time-varying, frequency-dependent impedance**, not one constant resistor.  \nFor low-frequency supply perturbations, use\n\\[\nR_{\\text{eff}}=\\left(\\frac{d\\overline{I}_{DD}}{dV_{DD}}\\right)^{-1},\n\\]\nand for general AC perturbations use periodic small-signal (PSS/PAC) impedance.\n\nSo: **yes, the answer changes once the ring oscillates.**",
        "format": "markdown",
        "sha256": "b09c721d6620f59805864793ef06b6eff0db0717571a509501068a5cdc7340b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It notes that oscillation invalidates the static small-signal model, but omits the dominant capacitive charging mechanism and whether the resulting resistance remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 3179,
        "output_tokens": 8369,
        "total_tokens": 11548,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8091,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 3179,
        "output_tokens": 8369,
        "total_tokens": 11548,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8091,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As \\(W_{M7}\\) increases, \\(M7\\) provides more tail current, so the internal nodes discharge faster and regeneration starts earlier.  \nThat gives **less pre-regeneration differential buildup**, so the **initial voltage gain decreases** (while speed generally increases).\n\n(You can think of it as \\(A_{v,\\text{init}} \\propto g_m/I_{\\text{tail}}\\), so higher \\(I_{\\text{tail}}\\) from larger \\(W_7\\) lowers initial gain.)",
        "format": "markdown",
        "sha256": "bcc0d7b3207cc81fcd981696f1ca4faec23336282b18009f268df6a7e77c28e1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that wider M7 increases tail current and lowers the initial gain, with a consistent gm/Itail explanation.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3255,
        "output_tokens": 7183,
        "total_tokens": 10438,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7071,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3255,
        "output_tokens": 7183,
        "total_tokens": 10438,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7071,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As \\(W_{M7}\\) increases, **the initial voltage gain generally decreases**.\n\nWhy: a wider \\(M7\\) gives higher tail current (and lower tail resistance), so the internal nodes discharge faster and regeneration starts earlier. That improves speed, but gives less pre-amplification time, so the **initial gain is lower** (roughly \\(A_{v,init}\\propto 1/\\sqrt{I_{tail}}\\), hence decreases with larger \\(W_7\\)).",
        "format": "markdown",
        "sha256": "47e7c24138ead99d06968f67cdfe77d6dbce8500344e296b898fa0e30c3bc8b6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that initial gain decreases as M7 widens and links the larger tail current to the approximately inverse-square-root gain trend, consistent with the stated gain relation.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 3255,
        "output_tokens": 6619,
        "total_tokens": 9874,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6511,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 3255,
        "output_tokens": 6619,
        "total_tokens": 9874,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6511,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As \\(W_{M7}\\) increases, \\(M7\\) can sink more tail current.  \nThat usually **reduces the initial (pre-regeneration) voltage gain** of this latch comparator (even though it makes it faster).\n\nA common way to see it is:\n\n\\[\nA_{\\text{init}} \\propto \\frac{g_{m,\\text{in}}}{I_{\\text{tail}}}\n\\]\n\nand \\(I_{\\text{tail}}\\) rises with \\(W_{M7}\\), so \\(A_{\\text{init}}\\) drops (or at best saturates for very large \\(W_{M7}\\)).",
        "format": "markdown",
        "sha256": "16ba3cdf28fbbbd3d7a6f02cbea4c7e196dcae8ae908c44b6c0086ffc048b6bc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that increasing M7 width raises tail current and reduces the initial gain through the gain-to-current relationship. The qualification about possible saturation does not undermine the central conclusion.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 3255,
        "output_tokens": 7953,
        "total_tokens": 11208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 3255,
        "output_tokens": 7953,
        "total_tokens": 11208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this latch-type comparator, increasing the capacitance at **P** and **Q** typically makes the **initial gain higher** (larger initial differential at \\(X\\)–\\(Y\\) before full regeneration).\n\n\\[\nA_{v,\\text{init}} \\sim \\frac{C_{P,Q}}{C_{X,Y}} \\; (\\text{or increases with } C_{P,Q})\n\\]\n\nSo: **gain up**, but with the trade-off of **slower nodes/discharge**, i.e., more delay.",
        "format": "markdown",
        "sha256": "f6860e086a2224e0554ae67c133365660e58ee55868fa8b4671c93fbad287167"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The central conclusion is wrong: increasing capacitance does not increase the initial gain; it leaves the gain approximately unchanged while slowing the transient. The answer notes the delay tradeoff, but its capacitance-proportional gain expression contradicts the key result.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3255,
        "output_tokens": 8622,
        "total_tokens": 11877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3255,
        "output_tokens": 8622,
        "total_tokens": 11877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at **P** and **Q** generally **reduces the initial (time-limited) voltage gain**.\n\nWhy: those nodes are charged/discharged by finite transistor current, so  \n\\[\n\\frac{dV}{dt}=\\frac{I}{C}\n\\]\nLarger \\(C_{P,Q}\\) means slower voltage change, so the input differential creates a smaller early \\(\\Delta V\\) at those nodes, and the latch starts with less initial differential (and more delay).\n\nSo: **initial gain builds up more slowly (effectively lower initial gain), and decision time increases.**",
        "format": "markdown",
        "sha256": "abc209d0724f8230fde05ac0b0ac73558bf5539c064f0d66f7c03d099b7c693b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion that initial gain decreases is wrong. Larger capacitance does slow the transient and increase decision time, but the longer amplification interval compensates, leaving the initial gain approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 3255,
        "output_tokens": 9942,
        "total_tokens": 13197,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9808,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 3255,
        "output_tokens": 9942,
        "total_tokens": 13197,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9808,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If \\(C_P\\) and \\(C_Q\\) are increased (equally), the **initial voltage gain increases**.\n\nReason: larger capacitance at \\(P,Q\\) slows their discharge, which extends the pre-regeneration interval and creates a larger initial differential at the latch output nodes (\\(X,Y\\)).  \n(Tradeoff: this usually makes the comparator slower, i.e., larger decision delay.)",
        "format": "markdown",
        "sha256": "cd2975973f986156b47689453a65f8577d585d0db9df01b91efc94f3fff80708"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite the essential result: the initial gain remains approximately unchanged because the longer amplification interval is offset by the slower differential-voltage buildup as capacitance increases. The answer correctly notes the slower discharge and added delay, but incorrectly infers a gain increase.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 3255,
        "output_tokens": 6168,
        "total_tokens": 9423,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 3255,
        "output_tokens": 6168,
        "total_tokens": 9423,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Great question. **It’s not purely one-directional**:\n\n- **Wider \\(M_5, M_6\\)** \\(\\rightarrow\\) stronger PMOS cross-coupled pull-up (higher \\(g_m\\)), so **regeneration can be faster**.\n- But wider devices also add more capacitance at nodes \\(X,Y\\) (and cross-coupled gate loading), and can oppose early discharge, so **initial decision buildup slows**.\n\n✅ **Net result:** there is an **optimum size**.  \n- If \\(M_5,M_6\\) are too small, increasing width improves speed.  \n- If you keep increasing beyond optimum, overall comparator speed **degrades**.",
        "format": "markdown",
        "sha256": "d6620b1d53bf7fbebe5846ee8ee55d8ee33a20aa4d7258e542af914d62983e9f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gives the correct initial-improvement and eventual-optimum trend, and identifies stronger regeneration and added capacitance. However, it incorrectly suggests the added capacitance slows the initial decision buildup, rather than clarifying that regeneration dominates initially.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3254,
        "output_tokens": 8640,
        "total_tokens": 11894,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8486,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3254,
        "output_tokens": 8640,
        "total_tokens": 11894,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8486,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_5\\) and \\(M_6\\) are the cross-coupled PMOS regeneration devices.\n\n- **Wider \\(M_5/M_6\\)** \\(\\Rightarrow\\) higher \\(g_m\\), stronger positive feedback, so **latch regeneration is faster**.\n- But wider devices also increase parasitic capacitance at nodes \\(X,Y\\), which slows the initial node movement.\n\nSo the net is a **trade-off**: a moderate width increase can improve speed, but making them too wide will eventually **degrade overall delay**. There is usually an optimum size.",
        "format": "markdown",
        "sha256": "8637a7f80c1ef422b23d7feda0aa2824272748db79f59853eb808506233c1385"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that wider M5/M6 initially speed regeneration, while added parasitic capacitance eventually limits the benefit and creates an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 3254,
        "output_tokens": 8411,
        "total_tokens": 11665,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8280,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 3254,
        "output_tokens": 8411,
        "total_tokens": 11665,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8280,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Great question. **Both effects happen**:\n\n- **Wider \\(M_5, M_6\\)** \\(\\rightarrow\\) higher \\(g_m\\), stronger cross-coupled regeneration \\(\\rightarrow\\) can **speed up latch decision**.\n- But wider devices also add more parasitic capacitance at \\(X,Y\\) (and larger precharge burden) \\(\\rightarrow\\) can **slow the nodes**.\n\nSo the delay is **not monotonic**:  \n✅ small/moderate widening often improves speed,  \n❌ too much widening eventually degrades speed.  \n\nIn practice, there is an **optimum width** for \\(M_5, M_6\\).",
        "format": "markdown",
        "sha256": "ccc53362d98f1e8220fccd5b8279042f19b804f26991a0ce08ab993b99758477"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by strengthening regeneration, while added capacitance eventually limits the benefit and creates an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3254,
        "output_tokens": 9592,
        "total_tokens": 12846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9442,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3254,
        "output_tokens": 9592,
        "total_tokens": 12846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9442,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Great question. In this kind of clocked-CMOS/TSPC-style stage, **increasing clocked transistor width is a tradeoff**:\n\n- **Pro:** lower \\(R_{\\text{on}}\\) of the clocked devices \\(\\rightarrow\\) faster discharge/charge path.\n- **Con:** higher diffusion capacitance at internal nodes \\(X, Y\\) and higher clock load on \\(CK/\\overline{CK}\\) \\(\\rightarrow\\) slower node and clock transitions.\n\nSo the speed is **not monotonic**:\n- If the clocked devices are too small, widening them can improve speed.\n- If you keep widening, speed eventually **degrades**.\n\nSo the correct design view is: **there is an optimum width; oversized clocked transistors hurt overall max speed.**",
        "format": "markdown",
        "sha256": "3c4fffb0b581bb479c42dca48bec22694bd318f5dba6ba5550412c25eff8e816"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by lowering on-resistance, while added node capacitance eventually limits or reverses the benefit, yielding an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 5719,
        "total_tokens": 7782,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5548,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 5719,
        "total_tokens": 7782,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5548,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Great question. **It’s not strictly one-way**:\n\n- Making the clocked transistors wider lowers their \\(R_{on}\\) → this can **improve delay** if they were too small.\n- But wider devices also add:\n  - more diffusion capacitance at internal nodes \\(X, Y\\),\n  - more clock load on \\(CK/\\overline{CK}\\),\n  - more clock feedthrough/charge injection.\n\nSo in this C\\(^2\\)MOS-style latch chain, speed has an **optimum width** for the clocked devices.  \n**Beyond that optimum, increasing width degrades max speed** (even though resistance keeps dropping).  \n\nIn practice: small-to-moderate upsizing may help; large upsizing usually hurts.",
        "format": "markdown",
        "sha256": "241e218c8bf3ab6248fe7a2d34572b86763f11bb4bf520fb61e3a359796e0abd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly says widening initially improves speed by reducing on-resistance, while added node capacitance eventually limits or reverses the benefit, yielding an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2063,
        "output_tokens": 6449,
        "total_tokens": 8512,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2063,
        "output_tokens": 6449,
        "total_tokens": 8512,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Great question. In this topology, **making the clocked transistors wider is not a guaranteed speed-up**.\n\n- Wider clocked devices → lower \\(R_{\\text{on}}\\) (**helps**).\n- But wider clocked devices also add diffusion/Miller capacitance at nodes \\(X\\) and \\(Y\\), and increase clock loading (**hurts**).\n\nSo delay behaves like a tradeoff:\n\\[\nt_d \\sim (R_{\\text{fixed}} + R_{\\text{clk}}(W))(C_{\\text{fixed}} + C_{\\text{clk}}(W))\n\\]\nwith \\(R_{\\text{clk}} \\propto 1/W\\), \\(C_{\\text{clk}} \\propto W\\), giving a **minimum at some optimum width**.\n\n✅ **Conclusion:**  \n- From very small widths, increasing \\(W\\) may improve speed a bit.  \n- Beyond the optimum, further increase **degrades speed** (and usually \\(f_{\\max}\\) drops).  \n\nIn practice for this kind of clocked latch/divider, over-sizing the clocked transistors often hurts.",
        "format": "markdown",
        "sha256": "2cabd09006cbbf7247ddcd108f79c827514da757174a11189d81d2937d3b67fb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly states that widening initially improves speed by reducing clocked-transistor on-resistance, while added capacitance at X and Y eventually limits or reverses the benefit, producing an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2063,
        "output_tokens": 7413,
        "total_tokens": 9476,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7175,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 2063,
        "output_tokens": 7413,
        "total_tokens": 9476,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7175,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—**functionally, it can generate quadrature phases**.\n\nThis loop behaves like a **÷2 dynamic flip-flop**:\n\n- \\(Y\\) toggles on one clock edge,\n- \\(X\\) toggles on the opposite edge.\n\nSo \\(X\\) and \\(Y\\) are separated by half a clock period \\(T_{CK}/2\\).  \nSince their own period is \\(2T_{CK}\\) (divide-by-2), that offset is:\n\n\\[\n\\frac{T_{CK}/2}{2T_{CK}} \\cdot 360^\\circ = 90^\\circ\n\\]\n\nSo \\(X\\) and \\(Y\\) are in quadrature (ideal case, 50% duty CK).  \nAlso \\(Z=\\overline{Y}\\), so \\(Y\\) and \\(Z\\) are 180° apart.\n\n**Practical note:** as drawn, only \\(Z\\) is explicitly buffered; \\(X\\)/\\(Y\\) are internal nodes and would usually need buffering before use as outputs.",
        "format": "markdown",
        "sha256": "402af850797e35204869adc5b31f5608567c18fe2e1776c3bfe7e7abc485e0c3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the ideal divide-by-two quadrature between X and Y, but does not explain the two practical departures from exact quadrature: Inv3 delay and unequal loading of the latch outputs. The buffering note does not address those phase errors.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 7070,
        "total_tokens": 9118,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6844,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 7070,
        "total_tokens": 9118,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6844,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: **yes, potentially**.\n\nThis is basically a **master–slave divide-by-2 (T flip-flop)** structure.  \n- One internal node (e.g., **X**) updates on one clock edge/phase.  \n- The output path (**Y → Inv3 → Z**) updates on the opposite phase.\n\nSo **X and Z** (or X and Y with polarity consideration) are at \\(f_{CK}/2\\) and are separated by about **90°** (quadrature), assuming near-50% clock duty and balanced delays.\n\nBut note:\n- **Y and Z** are just inverses (**180° apart**), not quadrature.\n- In the drawing, only **Z** is clearly buffered as an output; **X** is internal and would need buffering for practical quadrature use.",
        "format": "markdown",
        "sha256": "1b1c7a3bf1c37ca220c27e99ea0b7e54084047e86f9cc641222c4221a213aaed"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature, but does not explain the two key causes of non-exact quadrature: Inv3 delay and unequal loading of the latch outputs. Generic balanced-delay caveat is insufficient.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 7440,
        "total_tokens": 9488,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7263,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 7440,
        "total_tokens": 9488,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7263,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, but with a nuance.**\n\nThis is a clocked divide-by-2/toggle structure (two clocked inverters + one inverter feedback).  \nIt generates half-frequency nodes that switch on alternate clock edges:\n\n- \\(X\\) updates on one clock edge\n- \\(Y\\) updates on the opposite edge\n\nSo \\(X\\) and \\(Y\\) are separated by \\(\\tfrac{T_{in}}{2}\\), which is \\(\\tfrac{T_{out}}{4}\\) at divide-by-2 output frequency → **90° phase shift (quadrature)**.\n\nHowever:\n\n- \\(Z = \\overline{Y}\\), so **\\(Y\\) and \\(Z\\) are 180° apart**, not quadrature.\n- To get quadrature, use **\\(X\\) with \\(Y\\)** (or \\(X\\) with \\(Z\\), with opposite polarity sense).\n- Exact 90° assumes near-50% clock duty cycle and matched delays.",
        "format": "markdown",
        "sha256": "f94ba7c416f4b60c7f1f03900936907693840fad5c6569f6312b6e718899089b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature relationship for X/Y (and X/Z). It gives only a generic matched-delays caveat, omitting the specific Inv3 delay skew and unequal latch loading that explain why the outputs are not exactly in quadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 8635,
        "total_tokens": 10683,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8419,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 8635,
        "total_tokens": 10683,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8419,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In this topology (clocked-CMOS / TSPC-style latch loop), making the **clocked transistors wider is not a guaranteed speed-up**.\n\n- **Pro:** wider \\(W\\) lowers their \\(R_{on}\\), which can reduce conduction delay.\n- **Con (usually dominant in practice):** it increases  \n  1) **clock load** (\\(C_{g}\\) on \\(CK,\\overline{CK}\\)), and  \n  2) **internal diffusion capacitances** that are charged/discharged every cycle.\n\nSo with a real (finite-strength) clock driver, the **overall max speed usually degrades after a small upsizing** (or at best has a shallow optimum).  \nIf the clock were ideal/stiff, you might see slight improvement, but practically this is often a net slowdown when over-widened.",
        "format": "markdown",
        "sha256": "c51228b5e92c64d19123676ad7569a5262f43dcedcd2165f2c8bcda3ac9e53c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly notes that wider clocked devices reduce on-resistance, but incorrectly concludes that clock and diffusion capacitances usually make speed degrade. In this topology those capacitances add little loading to the data path; speed improves considerably, with charge sharing limiting the swing.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 7090,
        "total_tokens": 9220,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6908,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 7090,
        "total_tokens": 9220,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6908,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: **both effects exist**.\n\n- **Inside the latch path**, wider clocked transistors have lower \\(R_{on}\\), so the series pull-up/pull-down path is stronger ⇒ **faster data transition**.\n- But wider clocked devices also add more **clock capacitance** (and hidden-node parasitics), so the clock edges slow down unless the clock driver is also strengthened ⇒ this can **hurt overall max speed**.\n\nSo in practice: **speed improves at first, then saturates, and can degrade if you keep increasing width**.  \nIf you assume an ideal zero-impedance clock source, it mostly **improves**.",
        "format": "markdown",
        "sha256": "f02c5a29d778b3cb2bbe00c33e34cfc363efdf1d5e290137202e75ef766c8527"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the initial speed improvement from lower on-resistance and gives the right possible leveling or degradation trend. However, it omits charge sharing as the limiting effect and overemphasizes clock loading.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 11694,
        "total_tokens": 13824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11550,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 11694,
        "total_tokens": 13824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11550,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: **both effects exist**.\n\nFor the clocked devices (the CK/\\(\\overline{CK}\\) transistors in series with pull-up/pull-down):\n\n- **Wider transistors \\(\\Rightarrow\\) lower \\(R_{on}\\)**, so the active path is stronger, which tends to **reduce data-path delay**.\n- But wider transistors also add:\n  - more **clock load** (\\(C_{g}\\) on CK/\\(\\overline{CK}\\)),\n  - more **parasitic diffusion/internal node capacitance**,\n  - more clock feedthrough/power.\n\nSo:\n\n- With an **ideal clock source**, delay usually **improves (then saturates)** as width increases.\n- In a **real design** (finite clock driver), making them too wide can **degrade overall speed** because clock edges slow down.\n\nSo the practical answer is: **there is an optimum width; bigger is not always faster**.",
        "format": "markdown",
        "sha256": "5619171a6d7ac71f35678db5cdf272e1f85984ae8c3c91d595f81e0cc0249387"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies that lower on-resistance improves the data-path speed, but omits charge sharing and its swing degradation as the relevant limit. The clock-loading caveat does not substitute for that mechanism.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 5869,
        "total_tokens": 7999,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5661,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 5869,
        "total_tokens": 7999,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5661,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **clocked inverter loop** that behaves as a **toggle flip-flop** (i.e., a **÷2 frequency divider**), assuming:\n\n- left switch closes when \\(CK=1\\),\n- middle switch closes when \\(\\overline{CK}=1\\) (so \\(CK=0\\)),\n- only one switch is ON at a time.\n\nLet \\(Q\\) be the output of the rightmost inverter (fed back to the left).\n\n### Phase 1: \\(CK=1\\)\n- Left switch ON, middle switch OFF.\n- \\(Q\\) is applied to \\(Inv_1\\), so \\(Inv_1\\) output becomes \\(\\overline{Q}\\).\n- The node after the middle switch is isolated (stores previous value dynamically).\n\n### Phase 2: \\(CK=0\\)\n- Left switch OFF, middle switch ON.\n- The \\(\\overline{Q}\\) from \\(Inv_1\\) is transferred through the middle switch.\n- After the two right inverters (non-inverting overall), feedback output becomes:\n  \\[\n  Q_{next}=\\overline{Q}\n  \\]\n\nSo each full clock cycle complements the stored state:\n\\[\nQ_{n+1}=\\overline{Q_n}\n\\]\n\n## Conclusion\n- The loop **toggles every clock period**.\n- Output frequency is **\\(f_{out}=f_{CK}/2\\)**.\n- Functionally: **T flip-flop with \\(T=1\\)** (or a 1-bit counter stage).\n\n(Practical note: it is dynamic; floating nodes need periodic clocking and proper non-overlap/overlap control.)",
        "format": "markdown",
        "sha256": "178898d30b39077a1011b217623452662b0f8aad54c99552c0bdc1bb118cfb24"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the dynamic clocked circuit as a toggle divider with output frequency half the clock frequency; its phase-by-phase explanation is consistent with the intended operation.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 9337,
        "total_tokens": 10627,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8981,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 9337,
        "total_tokens": 10627,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8981,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the two switches as clock-controlled pass switches:\n\n- **S1** (left) is ON when \\(CK=1\\)\n- **S2** (middle) is ON when \\(CK=0\\) (since it is driven by \\(\\overline{CK}\\))\n\nLet the rightmost node (loop output) be \\(Q\\).\n\n### Phase-by-phase behavior\n\n1. **\\(CK=1\\):**  \n   - S1 ON, S2 OFF  \n   - \\(Q\\) is fed to Inv1 input, so Inv1 output becomes \\(\\overline{Q}\\).  \n   - This \\(\\overline{Q}\\) is “prepared” but not yet passed forward (S2 is open).\n\n2. **\\(CK=0\\):**  \n   - S1 OFF, S2 ON  \n   - Inv1 output is now passed to Inv2–Inv3.  \n   - Inv2 and Inv3 together are a **non-inverting pair**, so their output equals their input.  \n   - Therefore the new \\(Q\\) becomes the previous Inv1 output:\n     \\[\n     Q_{\\text{new}}=\\overline{Q_{\\text{old}}}\n     \\]\n\nSo \\(Q\\) toggles once per clock cycle (on one clock edge), i.e. this is effectively a:\n\n- **T flip-flop with \\(T=1\\)** (toggle FF), or\n- **divide-by-2 circuit** (\\(f_Q = f_{CK}/2\\)).\n\n---\n\nAlso: this is **not a free-running ring oscillator** in normal operation, because one of the two switches is always open (assuming ideal complementary clocks). It is a clocked/dynamic arrangement.",
        "format": "markdown",
        "sha256": "52d6eeb50561fec16b9140cc1525f1c9ed1afb7ef5f35aa2c46bf094faa594a6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the clocked dynamic arrangement as a divide-by-two, with the output toggling at half the input frequency. Its phase-by-phase signal-path details are secondary.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 7044,
        "total_tokens": 8334,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 7044,
        "total_tokens": 8334,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume the two controlled switches are ideal and complementary:\n\n- \\(S_1\\) is ON when \\(CK=1\\)\n- \\(S_2\\) is ON when \\(\\overline{CK}=1\\) (i.e., \\(CK=0\\))\n\nLet \\(Q\\) be the rightmost node (also fed back to the left).\n\n### Phase-wise behavior\n\n1. **\\(CK=1\\):**  \n   - \\(S_1\\) closed, \\(S_2\\) open.  \n   - First inverter sees \\(Q\\), so its output becomes \\(\\overline{Q}\\).  \n   - Output side is isolated, so \\(Q\\) stays at its previous value.\n\n2. **\\(CK=0\\):**  \n   - \\(S_1\\) open, \\(S_2\\) closed.  \n   - The stored value from inverter 1 is transferred through the last two inverters (which are net non-inverting), so:\n     \\[\n     Q_{\\text{new}} = \\overline{Q_{\\text{old}}}\n     \\]\n\nSo \\(Q\\) toggles once per clock cycle (on one clock edge, here effectively the falling edge).\n\n---\n\n### Conclusion\n\nThis arrangement behaves as a **T flip-flop (toggle FF)** with \\(T=1\\), hence a **divide-by-2** circuit:\n\n\\[\nf_Q = \\frac{f_{CK}}{2}\n\\]\n\n---\n\n### Practical note\n\nIt is a **dynamic** structure (floating internal nodes when switches are open), so it relies on clock activity and low leakage. Also, if both switches overlap ON, the 3-inverter odd loop can momentarily act like a ring oscillator/race path.",
        "format": "markdown",
        "sha256": "932c62aa8d0c04ed8e42a7e67d71bfa83954a31c19b8bfff56a398461ae90620"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a dynamic-latch divide-by-two; the phase-level signal-path details are secondary under the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 7153,
        "total_tokens": 8443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6782,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 7153,
        "total_tokens": 8443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6782,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is a **bypass/assist path** from the loop node (left) to the node after `Inv1` (right of `Inv1`).\n\n### What it changes\n- With complementary switches, when `CK` opens the left switch, `Inv1` would otherwise lose its input path.\n- The red inverter keeps an inversion path alive, so the loop can still be driven in that phase.\n- So it can be essential for proper oscillation (or much faster restart), not just a cosmetic addition.\n\n### Performance impact\n- **Pros**\n  - Prevents/fixes a floating intermediate node.\n  - Can improve startup and transition speed at that node (extra drive path).\n- **Cons**\n  - Adds capacitance to the loop node and internal node.\n  - Increases dynamic power.\n  - If `Inv1` is still actively driving while disconnected (not tri-stated/weak), it may **fight** the red inverter (contention), hurting speed and jitter and wasting power.\n\nSo: it usually helps robustness/speed of operation in that clock phase, but at the cost of load/power and possible contention if not carefully implemented.",
        "format": "markdown",
        "sha256": "b9c7187722e695850e768a58c2ed593b9941670274a51eaa736aecb087cc7a30"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the bypass path and a possible speed benefit, but misses the key low-frequency drawback: the unclocked branch can dominate and raise the minimum usable clock frequency. It also mischaracterizes the inverter as fixing a floating node or being essential for oscillation.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 12798,
        "total_tokens": 13957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 12798,
        "total_tokens": 13957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming this is a **clock-gated inverter loop/ring** (as drawn), the red inverter mainly acts as an **always-on bypass/keeper** for that first stage.\n\n### What it does\n- It drives the middle node even when the left CK-controlled path is open.\n- So that node is not left floating, and the loop can keep proper logic behavior (or restart quickly) in the opposite clock phase.\n- When the CK path is closed, the red inverter and black inverter effectively drive the same node in parallel (stronger drive).\n\n### Performance impact\n- **Pros**\n  - Better robustness (no floating intermediate node)\n  - Faster startup / cleaner phase transition behavior\n  - Potentially faster transition at that node (more drive)\n\n- **Cons**\n  - Extra input/output capacitance added to the loop\n  - Higher dynamic power (\\(P \\propto C V^2 f\\))\n  - Possible brief contention current if the two inverters switch slightly out of sync\n\nSo, in short: it usually improves stability/startup and can help speed at that node, but costs power and added loading (which can offset speed gains elsewhere).",
        "format": "markdown",
        "sha256": "e8927ecb74ab549f89d038338cf2c7db09e663d860cf4ff535afc8c9768115a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It partially recognizes an always-on bypass and possible speed benefit, but mischaracterizes it as a keeper that stabilizes the loop. It misses the key low-frequency failure mechanism: the unclocked branch can overpower the latch and raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 14435,
        "total_tokens": 15594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14192,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 14435,
        "total_tokens": 15594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14192,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Great question.  \nThat **red inverter is not neutral**—it changes both timing and behavior.\n\n### What it does electrically\nIt creates an **always-on A → C inversion path** in parallel with the CK-switched path.\n\n### Performance impact\n1. **When CK path is ON**:  \n   red inverter + Inv1 both drive node C → stronger drive, potentially faster edge at C.  \n   But node A now drives extra input capacitance, so previous stage slows.\n\n2. **When CK path is OFF (and \\(\\overline{CK}\\) path ON)**:  \n   the red path is still active, so you can form an odd-inversion loop (red + the two right inverters).  \n   That can cause **race/oscillation/glitches** instead of clean sampled behavior.\n\n3. **Contention risk**:  \n   Inv1 output and red inverter output are tied together; if they disagree even briefly, you get **fight current** (extra power, noise, jitter).\n\n---\n\nSo net: it may speed one node transition, but usually increases power and can hurt robustness/correctness unless this was intentionally designed as a gated oscillator and carefully sized (or Inv1 is tri-stated when disconnected).",
        "format": "markdown",
        "sha256": "8eac5140c18c667b1157619e9b039b0e89345cab5a6c009e4a4c4a716440d444"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the always-on feedforward path, its potential speed benefit, and the odd-inversion loop/contention. However, it misses the key low-frequency consequence: the branch can overpower the main path and raise the divider’s minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 12742,
        "total_tokens": 13901,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12483,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 12742,
        "total_tokens": 13901,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12483,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "I would **not** agree with that answer as stated.\n\n- A **cross-coupled latch** needs two inverters connected in opposite directions (A→B and B→A).\n- In your figure, `Inv1` and the red inverter are both connected in the **same direction** (left node → middle node), effectively in parallel.  \n  So they do **not** form a cross-coupled latch.\n\n### What the red inverter actually does\nIts practical role is to provide an **always-on inversion path** from the feedback node (left) to the internal node (between `Inv1` and the \\(\\overline{CK}\\) switch), even when the CK-controlled path through `Inv1` is not actively sampling.\n\nSo it is part of the loop behavior/timing (and can act as a weak bias/keeper-like assist if sized weak), but it is **not** the classical latch-keeper that removes minimum-frequency limits by itself.\n\nIf this were truly to eliminate min-frequency leakage issues, you’d expect explicit keepers on the actual floating dynamic storage nodes.",
        "format": "markdown",
        "sha256": "5f959279d2baf3ebea095455a1f586b19aa44ca4abfbc871895046273f6a64a0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the cross-coupled-keeper interpretation and notes an always-on path bypassing the clocked path. But it mischaracterizes that path as a possible keeper-like assist and misses the key feedforward effect: it can speed high-rate operation yet overpower the latch path at low rates, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 24767,
        "total_tokens": 25971,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 24767,
        "total_tokens": 25971,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "I would **not** agree with that explanation as stated.\n\n- A true keeper/cross-coupled latch needs **positive feedback** (each inverter feeding the other’s input).\n- Here, the red inverter and `Inv1` both drive the **same node** (the node between `Inv1` and the `\\overline{CK}` switch). They are not cross-coupled in latch form.\n\nSo the red inverter is **not** a proper static keeper latch with `Inv1`, and it does **not** fully remove minimum-frequency/leakage limits (floating dynamic nodes still exist elsewhere).\n\n### Actual role of the red inverter\nIt is mainly a **feedback assist / speed-up path** (often weakly sized):\n- helps drive/precondition that internal node,\n- improves transition speed / level restoration (especially through pass-switch timing),\n- at the cost of possible contention current with `Inv1` during part of the cycle.\n\nSo: **timing/performance aid**, not a true latch keeper that eliminates min-clock constraints.",
        "format": "markdown",
        "sha256": "aa07a84331d200e1c1051e54d09c89fa2ff047ceb169100935fe49097398568a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and notes speed-up and contention, but mislabels the branch as feedback and misses its key feedforward path bypassing the CK switch and Inv1. It also omits that the unclocked branch can dominate at low rates and raise the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 26985,
        "total_tokens": 28189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26767,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 26985,
        "total_tokens": 28189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26767,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: **not really**.\n\nThe quoted explanation is inaccurate in one key way:  \nthe red inverter is **not cross-coupled with `Inv1`** (so it is not a classic latch with `Inv1`).\n\n### What the red inverter actually does\n\nLet:\n\n- `A` = left feedback node (output of last black inverter)\n- `C` = node between `Inv1` and the `\\overline{CK}` switch\n\nThe red inverter connects **A → C** (inverting), i.e. it is a **bypass/alternate drive path**.\n\n- When `CK` opens the left switch (disconnecting `Inv1` input), `Inv1` is no longer a reliable path.\n- The red inverter still drives node `C` from `A`, so that node is not purely dynamic/floating.\n- With the right switch closed, it helps form the active loop through the right-side inverters (odd inversion path), i.e. keeps the oscillation path functional in that phase.\n\nSo its role is closer to:\n\n- **bypass inverter / staticizer / weak keeper of that internal node**, and\n- maintaining proper loop behavior when the clocked path is off.\n\n### About “removes minimum clock frequency”\n\nIt can **reduce leakage sensitivity** of that internal node, but saying it completely removes minimum-frequency constraints is too strong (other dynamic/floating nodes may still exist depending on implementation).\n\nSo: **partly keeper-like effect, yes; “cross-coupled latch with Inv1,” no.**",
        "format": "markdown",
        "sha256": "21df445b33c00d5c07d8e8e08fcd21d2d70cc5da445fa27b7a73a8be9d35bebc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly rejects the cross-coupled-latch claim, but misstates the connection and treats the red inverter as a keeper/staticizer. It misses the unclocked feedforward branch’s low-frequency failure mode and its effect of raising the minimum usable clock rate.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 16869,
        "total_tokens": 18073,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16542,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 16869,
        "total_tokens": 18073,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16542,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Great question. For this **inverter + resistive feedback LNA**, do it with a constraint-based optimization:\n\n\\[\ng_m = g_{m1}+g_{m2}, \\quad r_o = r_{o1}\\parallel r_{o2}, \\quad R_S=50\\Omega\n\\]\n\n### 1) Enforce the input-match constraint\nFor this topology (midband, ignoring \\(C_1\\) parasitics):\n\n\\[\nR_{in}\\approx \\frac{R_F+r_o}{1+g_m r_o}\n\\]\n\nSet \\(R_{in}=50\\Omega\\), so:\n\n\\[\nR_F = 50(1+g_m r_o)-r_o\n\\]\n\nSo \\(R_F\\) and \\(g_m\\) are not independent once you force 50 Ω.\n\n---\n\n### 2) Use NF expression (thermal-noise dominated)\nA useful form is:\n\n\\[\nF \\approx 1+\\frac{R_S}{R_F}+\\frac{\\gamma_{eq}}{g_m R_S}\n\\]\n(for high loop gain / \\(g_mR_F\\gg1\\)).\n\nInterpretation:\n- \\(\\frac{R_S}{R_F}\\): feedback resistor noise term → **larger \\(R_F\\) is better**\n- \\(\\frac{\\gamma_{eq}}{g_mR_S}\\): device channel-noise term → **larger \\(g_m\\) is better**\n\nBecause \\(R_{in}\\) is fixed, you increase \\(g_m\\) and then recompute \\(R_F\\) from the match equation above.\n\n---\n\n### 3) Practical optimization strategy\n1. Choose the **largest \\(g_m\\)** your power budget allows (higher bias and/or wider devices).\n2. Compute \\(R_F\\) from \\(R_{in}=50\\Omega\\).\n3. Verify gain/stability/bandwidth.\n4. Iterate in simulation including parasitics and noise.\n\n---\n\n### 4) Important limit\nIf \\(r_o\\) is very large, matching tends toward \\(g_m\\approx 1/50=20\\text{ mS}\\), and NF has a floor near \\(1+\\gamma_{eq}\\) (typically ~2–3 dB).  \nSo if you need much lower NF, you usually need a different input/noise-matching approach (e.g., inductive/transformer matching), not only retuning \\(R_F\\).",
        "format": "markdown",
        "sha256": "b1935099bcd6e427f2d297be6e4056380b6f6542842390e6c60e3c1e41a1a3b7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gives the finite-r_o match relation and correctly recommends increasing g_m while readjusting R_F. However, its unqualified claim that large r_o pins g_m at 1/R_S and imposes an 1+\\gamma NF floor conflicts with the match-adjusted optimization, which can lower NF below that value.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 15914,
        "total_tokens": 18381,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15398,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 15914,
        "total_tokens": 18381,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15398,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this **resistive-feedback inverter LNA**, treat \\(R_F\\) and \\(g_m\\) as coupled.\n\n### 1) Enforce the input-match constraint\nLet\n\\[\ng_{m\\Sigma}=g_{m1}+g_{m2}, \\quad R_o \\approx r_{o1}\\parallel r_{o2}(\\parallel R_L),\n\\]\n\\[\nA_v \\approx -g_{m\\Sigma}R_o.\n\\]\n\nFor shunt feedback:\n\\[\nR_{in}\\approx \\frac{R_F}{1-A_v} \\approx \\frac{R_F}{1+|A_v|}.\n\\]\n\nIf \\(R_{in}=50\\ \\Omega\\), then:\n\\[\nR_F = 50\\,(1+|A_v|)\\approx 50\\,(1+g_{m\\Sigma}R_o).\n\\]\n\nSo \\(R_F\\) is **not free** once \\(g_mR_o\\) is chosen.\n\n---\n\n### 2) Noise factor (first-order)\nA common approximation is:\n\\[\nF \\approx 1+\\frac{R_S}{R_F}+\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}{(g_{m\\Sigma})^2R_S},\n\\quad (R_S=50\\ \\Omega)\n\\]\n(you may see a small correction factor on the transistor term in more exact derivations).\n\nSubstitute \\(R_F\\) from matching:\n\\[\nF \\approx 1+\\frac{1}{1+g_{m\\Sigma}R_o}+\\frac{\\gamma_{eq}}{g_{m\\Sigma}R_S}.\n\\]\n\nThis shows NF improves when \\(g_{m\\Sigma}\\) and \\(R_o\\) increase.\n\n---\n\n### 3) Practical optimization rule (with \\(R_{in}=50\\Omega\\) fixed)\n- **Maximize \\(g_{m\\Sigma}\\)** (larger devices / more bias / lower \\(V_{ov}\\), within linearity & power limits).\n- **Keep \\(R_o\\) high** (helps loop gain, allows larger \\(R_F\\), lowers \\(R_F\\)-noise contribution).\n- After each sizing/bias change, **recompute \\(R_F\\)** from \\(R_F=50(1+|A_v|)\\).\n- Iterate with AC + noise simulation.\n\nIn the simplified model, NF decreases monotonically with \\(g_m\\), so there is usually **no finite mathematical optimum**—the best NF is at the largest practical \\(g_m\\) (subject to power, bandwidth, stability, and IIP3 constraints).",
        "format": "markdown",
        "sha256": "9bcf5a47bb30ab406b88cc5a4a60ddec3607e2cc65f38a30324c3ab8a2a4f109"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly recommends increasing gm while raising RF to preserve the 50 Ω match, and its noise-factor trend shows why NF can fall as gm and loop gain increase. The match and noise equations are approximate, but the central optimization conclusion is correct.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2467,
        "output_tokens": 14124,
        "total_tokens": 16591,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13563,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2467,
        "output_tokens": 14124,
        "total_tokens": 16591,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13563,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this **resistive-feedback inverter LNA**, the usual way is:\n\n1. **Write the input-match constraint**  \n   Let\n   \\[\n   g_{m\\Sigma}=g_{m1}+g_{m2},\\qquad r_{o\\Sigma}=r_{o1}\\parallel r_{o2}\n   \\]\n   Then (midband, \\(C_1\\) ≈ short):\n   \\[\n   R_{in}\\approx \\frac{R_F+r_{o\\Sigma}}{1+g_{m\\Sigma}r_{o\\Sigma}}\n   \\]\n   Enforce \\(R_{in}=50\\ \\Omega\\):\n   \\[\n   R_F=50(1+g_{m\\Sigma}r_{o\\Sigma})-r_{o\\Sigma}\n   \\]\n\n2. **Use an NF expression** (simplified but standard):\n   \\[\n   F \\approx 1+\\underbrace{\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}{(g_{m1}+g_{m2})^2R_S}}_{\\text{MOS channel noise}}\n   +\\underbrace{\\kappa\\frac{R_S}{R_F}}_{\\text{feedback resistor noise}}\n   \\]\n   with \\(R_S=50\\ \\Omega\\), and \\(\\kappa\\) model-dependent (often 1 to 4).\n\n3. **Optimization result (with \\(R_{in}=50\\ \\Omega\\) fixed):**\n   - Increase \\(g_{m\\Sigma}\\) as much as power/linearity/bandwidth allow.\n   - Recompute \\(R_F\\) from the match equation above.\n   - This lowers both MOS-noise term (\\(\\propto 1/g_m\\)) and \\(R_F\\)-noise term (\\(\\propto 1/R_F\\)).\n\n---\n\n### Practical takeaway\n- If \\(r_o\\) is large, \\(R_{in}\\approx 1/g_{m\\Sigma}\\), so matching forces\n  \\[\n  g_{m\\Sigma}\\approx \\frac{1}{50}=20\\ \\text{mS}\n  \\]\n  (then transistor-noise floor is mostly fixed, ~2–3 dB class depending on \\(\\gamma\\)).\n- In that case, improve NF mainly by choosing **large \\(R_F\\)** (as far as gain/bandwidth/stability permit) and low-noise biasing/device lengths.\n\nIf you want, I can also give you a quick numeric design flow (pick \\(g_m/I_D\\), estimate bias current, then solve \\(R_F\\)).",
        "format": "markdown",
        "sha256": "1f2083775ca08719cd0d50c7508d3eba82b23b16b2d4ff9c37adcf77363edd19"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the finite-output-resistance match relation and correctly recommends increasing gm while adjusting RF to preserve 50 Ω, which lowers the noise terms and captures the route to NF below 1 + γ. The large-ro remark describes a limiting case.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2467,
        "output_tokens": 14543,
        "total_tokens": 17010,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13983,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2467,
        "output_tokens": 14543,
        "total_tokens": 17010,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13983,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming small-signal operation, ideal \\(I_{SS}\\), and neglecting \\(r_o\\) terms:\n\n\\[\ni_g(M_1)\\approx 0\n\\]\n\nSo at node \\(P\\), the only resistive current is through \\(R_F\\):\n\n\\[\ni_{in,\\text{amp}}=\\frac{v_p-v_{out}}{R_F}\n\\]\n\nHence\n\n\\[\nR_{in}\\equiv \\frac{v_p}{i_{in,\\text{amp}}}\n= \\frac{R_F}{1-\\dfrac{v_{out}}{v_p}}\n= \\frac{R_F}{1-A_v}\n\\]\n\nwhere \\(A_v=v_{out}/v_p\\) is the forward gain from \\(P\\to V_{out}\\) (with feedback loading neglected in first order).\n\nFor this circuit:\n\n- Stage 1: \\(\\displaystyle v_x \\approx -g_{m1}R_{D1}\\,v_p\\)\n- Stage 2 (M2–M3 pair): \\(\\displaystyle v_{out}\\approx \\left(\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}R_{D2}\\right)v_x\\)\n\nSo\n\n\\[\nA_v \\approx -g_{m1}R_{D1}\\left(\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}R_{D2}\\right)\n\\]\n\nTherefore\n\n\\[\n\\boxed{\nR_{in}\\approx\n\\frac{R_F}{\n1+g_{m1}R_{D1}\\left(\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}R_{D2}\\right)\n}\n}\n\\]\n\nand if \\(g_{m3}\\gg g_{m2}\\), this simplifies to\n\n\\[\nR_{in}\\approx \\frac{R_F}{1+g_{m1}g_{m2}R_{D1}R_{D2}}\n\\]\n\nIncluding the input capacitor:\n\n\\[\n\\boxed{\nZ_{in}(s)=\\left(R_{in}\\parallel \\frac{1}{sC_{in}}\\right)\n=\\frac{1}{\\,sC_{in}+\\dfrac{1-A_v}{R_F}\\,}\n}\n\\]",
        "format": "markdown",
        "sha256": "b63acb58f47e2b9bc8815aed44f0697e8b68c7e618b62c7e73643e8e255892d2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies that feedback lowers the input resistance, but gives only an approximation and omits the output-side resistance term. The required result is \\(R_{in}=(R_F+R_{D2})/(1+A_0)\\), with the specified two-stage unloaded gain; the candidate also gives a mismatched gain expression.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 14632,
        "total_tokens": 14842,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14125,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 14632,
        "total_tokens": 14842,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14125,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat \\(M_1\\) as a common-source stage and \\(M_2\\text{-}M_3\\) as a transconductor, and assume small-signal, \\(r_o\\to\\infty\\), gate currents \\(\\approx 0\\).\n\n\\[\nv_x \\approx -g_{m1}R_{D1}v_p\n\\]\n\nFor the \\(M_2\\)-\\(M_3\\) pair (with \\(V_b\\) AC-grounded), the effective transconductance is\n\n\\[\ng_{m,\\text{eq}}=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\n\\quad (\\text{if matched: } g_{m,\\text{eq}}=g_m/2).\n\\]\n\nSo open-loop voltage gain from \\(P\\) to \\(V_{out}\\) is\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_p}\n\\approx -g_{m1}R_{D1}\\,g_{m,\\text{eq}}R_{D2}.\n\\]\n\nAt the input node, current goes through \\(R_F\\):\n\\[\ni_{in}=\\frac{v_p-v_{out}}{R_F}=\\frac{(1-A_v)v_p}{R_F}.\n\\]\n\nHence input resistance:\n\n\\[\n\\boxed{R_{in}=\\frac{v_p}{i_{in}}=\\frac{R_F}{1-A_v}}\n\\]\n\n\\[\n\\boxed{R_{in}\\approx\n\\frac{R_F}{1+g_{m1}R_{D1}\\,g_{m,\\text{eq}}R_{D2}}}\n\\]\n(and for matched \\(M_2,M_3\\): \\(R_{in}\\approx \\frac{R_F}{1+\\frac12 g_{m1}g_mR_{D1}R_{D2}}\\)).\n\nIncluding \\(C_{in}\\), the total input impedance is:\n\\[\nZ_{in}(s)=\\left[sC_{in}+\\frac{1-A_v}{R_F}\\right]^{-1}.\n\\]",
        "format": "markdown",
        "sha256": "e0d09d093b870bc6702db40ef4770951b401558f37852a5952c4a77a5db54d61"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer correctly identifies the feedback-induced low input resistance and the gain dependence, but treats the output as unloaded when applying the open-loop gain. It therefore misses the output-side resistance term: the exact result is (RF + RD2)/(1 + A0), not RF/(1 + A0).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 17499,
        "total_tokens": 17709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17036,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 17499,
        "total_tokens": 17709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17036,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the MOS gates as open-circuit (no input gate current), and use small-signal analysis.\n\nLet \\(v_P\\) be the input node voltage and define the forward gain\n\\[\nA_v \\equiv \\frac{v_{out}}{v_P}.\n\\]\n\nThen KCL at node \\(P\\):\n\\[\ni_{in}=sC_{in}v_P+\\frac{v_P-v_{out}}{R_F}\n= \\left[sC_{in}+\\frac{1-A_v}{R_F}\\right]v_P.\n\\]\n\nSo the input impedance is\n\\[\n\\boxed{Z_{in}(s)=\\frac{v_P}{i_{in}}\n=\\left[sC_{in}+\\frac{1-A_v}{R_F}\\right]^{-1}}\n\\]\nand at low frequency (\\(s\\to 0\\)):\n\\[\n\\boxed{R_{in}=\\frac{R_F}{1-A_v}}.\n\\]\nSince this is a negative-feedback TIA (\\(A_v<0\\)):\n\\[\nR_{in}\\approx \\frac{R_F}{1+|A_v|}.\n\\]\n\n---\n\nFor this topology (ideal \\(I_{SS}\\), neglect \\(r_o\\)):\n\\[\nv_X \\approx -g_{m1}R_{D1}v_P,\n\\]\n\\[\n\\frac{v_{out}}{v_X}\\approx \\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\,R_{D2},\n\\]\nhence\n\\[\nA_v \\approx -g_{m1}R_{D1}R_{D2}\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}.\n\\]\n\nTherefore\n\\[\n\\boxed{\nR_{in}\\approx\n\\frac{R_F}{\n1+g_{m1}R_{D1}R_{D2}\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\n}\n}\n\\]\n(and \\(Z_{in}(s)\\) is this \\(R_{in}\\) in parallel with \\(1/(sC_{in})\\)).",
        "format": "markdown",
        "sha256": "5c5937d93d8f9eaa017df9265c70fac677ecc15891d34cc6d1cd455df3d70af8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies gain-enhanced feedback as reducing the input resistance and gives a plausible gain expression, but misses the output-side resistance in the exact Miller result. The required expression is \\((R_F+R_{D2})/(1+A_0)\\), not just \\(R_F/(1+A_0)\\).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 12584,
        "total_tokens": 12794,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 12584,
        "total_tokens": 12794,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Use the **supply-noise-to-phase-noise transfer** of the VCO.\n\nFor small perturbations, model the VCO as:\n\n\\[\n\\frac{d\\phi_n(t)}{dt}=K_{VDD}\\,v_n(t)\n\\]\n\n- \\(v_n(t)\\): supply noise at the VCO supply node (from LDO), PSD \\(S_{v_n}(f)=S_{th}(f)\\) (after any supply filtering).\n- \\(K_{VDD}\\): supply pushing gain (rad/s/V).  \n  (Or \\(K_f\\) in Hz/V, where \\(K_{VDD}=2\\pi K_f\\).)\n\nThen at offset \\(f_m\\) from carrier:\n\n\\[\nS_{\\phi}(f_m)=\\frac{|K_{VDD}|^2\\,|H_{sup}(f_m)|^2\\,S_{th}(f_m)}{(2\\pi f_m)^2}\n\\]\n\n- \\(H_{sup}(f_m)\\): optional transfer from LDO noise source to actual VCO supply perturbation (include decoupling, impedance, etc.).\n\nSSB phase noise:\n\n\\[\n\\mathcal{L}(f_m)=\\frac{1}{2}S_{\\phi}(f_m)\n\\]\n\nSo, with \\(K_f\\) (Hz/V):\n\n\\[\n\\boxed{\\mathcal{L}(f_m)=\\frac{1}{2}\\left(\\frac{K_f\\,|H_{sup}(f_m)|}{f_m}\\right)^2 S_{th}(f_m)}\n\\]\n\n(in linear units; convert to dBc/Hz with \\(10\\log_{10}\\)).\n\n---\n\nIn practice:\n1. Get \\(S_{th}(f)\\) at LDO output.\n2. Get \\(K_f\\) (or \\(K_{VDD}\\)) from simulation/measurement (supply ripple injection).\n3. Apply above formula.\n4. Add this contribution to intrinsic VCO phase noise in **linear** scale.\n\n(For an ideal perfectly symmetric differential LC VCO, first-order common-mode supply noise may largely cancel; real mismatch makes \\(K_f\\neq0\\).)",
        "format": "markdown",
        "sha256": "ad3aee1552a891177c12afd150b6ffcb3d8242656a4c78000e4468d34a227d2e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly uses supply-pushing sensitivity and FM-to-phase conversion with the expected 1/offset-frequency-squared dependence. It omits the circuit-specific insight that supply noise acts directly on the varactors, making Kpush closely related to KVCO, and includes a potentially distracting symmetry caveat.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2875,
        "output_tokens": 4942,
        "total_tokens": 7817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4482,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2875,
        "output_tokens": 4942,
        "total_tokens": 7817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4482,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the LDO noise as a **supply-voltage noise source** that frequency-modulates the VCO.\n\n\\[\n\\text{(1) } S_{vdd}(\\Delta f)=S_{th}(\\Delta f)\\cdot |H_{LDO\\to VDD}(\\Delta f)|^2\n\\]\n(If \\(S_{th}\\) is already at the VCO supply node, then \\(S_{vdd}=S_{th}\\).)\n\nDefine VCO supply-pushing gain:\n\n- \\(K_{VDD}=\\frac{\\partial f_0}{\\partial V_{DD}}\\) in Hz/V  \n  (or \\(K_\\omega=\\frac{\\partial \\omega_0}{\\partial V_{DD}}=2\\pi K_{VDD}\\) in rad/s/V).\n\nSupply noise \\(\\to\\) phase noise transfer is an integrator:\n\\[\nH_{v\\to\\phi}(j2\\pi\\Delta f)=\\frac{K_\\omega}{j2\\pi\\Delta f}\n=\\frac{K_{VDD}}{j\\Delta f}.\n\\]\n\nSo phase PSD is:\n\\[\nS_\\phi(\\Delta f)=\\left|\\frac{K_{VDD}}{\\Delta f}\\right|^2 S_{vdd}(\\Delta f)\n\\]\n(or equivalently with \\(K_\\omega\\): \\(\\left|\\frac{K_\\omega}{2\\pi\\Delta f}\\right|^2 S_{vdd}\\)).\n\nThen SSB phase noise:\n\\[\n\\mathcal{L}(\\Delta f)=\\frac{1}{2}S_\\phi(\\Delta f)\n\\]\nand in dBc/Hz:\n\\[\n\\mathcal{L}_{dBc/Hz}=10\\log_{10}\\!\\left[\\frac12\n\\left(\\frac{K_{VDD}}{\\Delta f}\\right)^2 S_{vdd}(\\Delta f)\\right].\n\\]\n\nFinally, add this to intrinsic VCO phase noise in **linear** units.  \n\nIf needed, include extra attenuation/conversion factors (VCO PSRR, common-mode to differential conversion) inside \\(H_{LDO\\to VDD}\\).",
        "format": "markdown",
        "sha256": "ccd893f36eac6bdf9276cd71d5997648cce25175f16cd3eca962c87614538221"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly models supply noise as frequency modulation and gives the 1/Δf² phase-noise conversion with an equivalent supply-pushing sensitivity. It omits the circuit-specific insight that the supply perturbation acts directly on the varactors, making Kpush closely related to KVCO.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2875,
        "output_tokens": 6465,
        "total_tokens": 9340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5997,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2875,
        "output_tokens": 6465,
        "total_tokens": 9340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5997,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Use a **noise transfer chain** from LDO output voltage noise to oscillator phase:\n\n1. **LDO noise at VCO supply node**\n\\[\nS_{vdd}(f)=|H_{\\text{LDO}\\to VDD}(f)|^2\\,S_{th}(f)\n\\]\n(If \\(S_{th}\\) is already the noise at \\(V_{out}\\), then \\(S_{vdd}=S_{th}\\).)\n\n2. **Supply pushing of VCO**\nDefine\n\\[\nK_{VDD}=\\frac{\\partial f_0}{\\partial VDD}\\quad[\\text{Hz/V}]\n\\]\n(or \\(K_{\\omega VDD}=2\\pi K_{VDD}\\) in rad/s/V).\n\nThen frequency-noise PSD is\n\\[\nS_{\\Delta f}(f)=K_{VDD}^2\\,S_{vdd}(f).\n\\]\n\n3. **Convert frequency noise to phase noise** (\\(\\phi=\\int 2\\pi \\Delta f\\,dt\\)):\n\\[\nS_{\\phi}(f)=\\frac{S_{\\Delta f}(f)}{f^2}\n=\\frac{K_{VDD}^2}{f^2}S_{vdd}(f)\n\\]\n(equivalently \\(\\frac{K_{\\omega VDD}^2}{(2\\pi f)^2}S_{vdd}(f)\\)).\n\n4. **SSB phase noise**\n\\[\n\\mathcal L(f)=\\frac{1}{2}S_{\\phi}(f)\n\\]\nand in dBc/Hz:\n\\[\nL_{dBc/Hz}(f)=10\\log_{10}\\!\\left[\\frac12\\frac{K_{VDD}^2}{f^2}|H_{\\text{LDO}\\to VDD}(f)|^2S_{th}(f)\\right].\n\\]\n\nSo, practically: get \\(K_{VDD}\\) (from sim/measurement), multiply by LDO noise PSD, divide by \\(f^2\\), then apply \\(1/2\\) for SSB.  \n(If needed, add this in linear PSD to intrinsic VCO phase noise.)",
        "format": "markdown",
        "sha256": "dbfa6d44462e795d1887927122a8ad63734b3d00d7765acf189ed480d53a4c74"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing and applies the frequency-noise-to-phase-noise conversion with the expected 1/offset-frequency-squared dependence and SSB factor. It omits the circuit-specific insight that supply perturbation acts directly on the varactors, making Kpush closely related to KVCO.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2875,
        "output_tokens": 5247,
        "total_tokens": 8122,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4782,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2875,
        "output_tokens": 5247,
        "total_tokens": 8122,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4782,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) at the tail node is a **tail-noise filtering** trick, and it usually **improves phase noise**.\n\nWhy:\n\n- \\(C_T\\) makes the tail node low impedance at RF (especially around \\( \\omega_0 \\) and \\(2\\omega_0\\)).\n- So noise current from \\(I_{SS}\\) is shunted to ground instead of being upconverted into differential phase fluctuations.\n- It also reduces the \\(2\\omega_0\\) tail-node ripple, which lowers flicker-noise upconversion (improves close-in \\(1/f^3\\) region).\n\nSo overall:\n- **Close-in phase noise improves the most** (lower corner),\n- **far-out floor may improve slightly or stay similar** if tank/device noise already dominates.\n\n(If \\(C_T\\) is too small, little benefit; beyond a certain size, returns saturate.)",
        "format": "markdown",
        "sha256": "b45970cd3463025b37baa5a65f81acd1d4ff16722e893f22253c3531eadf7bae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It presents CT as a generally monotonic phase-noise improvement from tail-noise filtering and reduced ripple, missing the nonmonotonic class-C benefit and possible degradations.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 8613,
        "total_tokens": 12180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 8613,
        "total_tokens": 12180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) at the tail node is usually a **phase-noise improvement technique**.\n\n- \\(C_T\\) makes the tail node \\(P\\) low impedance at RF (especially around \\(2\\omega_0\\)).\n- So the noisy tail-current source is AC-bypassed, and its noise is less converted from common-mode into differential phase perturbation.\n- Result: **phase noise decreases** (better \\(L(\\Delta f)\\)), often with a lower \\(1/f^3\\) corner.\n\nPractical note: once \\(C_T\\) is “large enough,” improvement saturates, and remaining phase noise is set by the cross-coupled pair/tank noise.",
        "format": "markdown",
        "sha256": "5a23b13d88cbab6df2bc9e029f88eff96a73b5c490097e6d92863993876982d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims CT generally reduces phase noise and saturates, missing the nonmonotonic effect and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 3567,
        "output_tokens": 15692,
        "total_tokens": 19259,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15542,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 3567,
        "output_tokens": 15692,
        "total_tokens": 19259,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15542,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) at the tail **usually improves (lowers)** phase noise, especially close-in.\n\nWhy:\n\n- The tail node \\(P\\) carries mostly **common-mode / \\(2\\omega_0\\)** content.\n- Tail-source noise (\\(I_{SS}\\) device, especially flicker) gets upconverted to phase noise through this node.\n- \\(C_T\\) makes \\(P\\) a low-impedance AC node at RF (and around \\(2\\omega_0\\)), so a lot of tail noise is shunted to ground instead of being mixed into the differential oscillation.\n\nSo you typically see:\n- lower \\(1/f^3\\) corner,\n- better close-in phase noise,\n- far-out improvement may be smaller.\n\nIf \\(C_T\\) is too small, effect is weak; if overly large/nonideal, benefits saturate and other tradeoffs (startup, waveform shaping, device noise balance) can appear.",
        "format": "markdown",
        "sha256": "2ca1ded9c858e50ad61081798c1f8abf12c5cea66cb2af8f6eb1650fa7b7f492"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims CT usually improves phase noise through tail-node filtering, but misses the nonmonotonic effect and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 3567,
        "output_tokens": 9236,
        "total_tokens": 12803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9031,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 3567,
        "output_tokens": 9236,
        "total_tokens": 12803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9031,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **coupled LC (quadrature) oscillator**, so to first order its oscillation is set by each tank’s resonance.\n\n\\[\n\\omega_{osc} \\approx \\frac{1}{\\sqrt{L\\,C_{eq}}}, \n\\qquad\nf_{osc} \\approx \\frac{1}{2\\pi\\sqrt{L\\,C_{eq}}}\n\\]\n\n- \\(L\\): the tank inductance seen at each node (\\(X_i, Y_i\\))\n- \\(C_{eq}\\): total capacitance at that node (explicit caps + device parasitics)\n\nSo the two cores lock together (typically in quadrature), but the frequency is still approximately the tank \\(LC\\) resonance; coupling currents (\\(I_1\\)) mainly cause a small shift.\n\nIf you share \\(L\\) and \\(C\\) values, I can compute a numeric frequency.",
        "format": "markdown",
        "sha256": "9c549b4180ae2a0c30d8dd821b8d048a11103cc1b82d9def0c8cf1314bcfc709"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the tank resonance and notes a coupling-induced shift, but gives no estimate for that shift (such as Δω ≈ αω₀/(2Q)); the key frequency correction is therefore missing.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 6808,
        "total_tokens": 8609,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6613,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 6808,
        "total_tokens": 8609,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6613,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **coupled differential LC oscillator (QVCO-like)**, so the oscillation frequency is mainly set by each LC tank resonance:\n\n\\[\nf_{osc}\\approx \\frac{1}{2\\pi\\sqrt{L_{\\text{tank}}\\,C_{\\text{tank}}}}\n\\]\n\n- \\(L_{\\text{tank}}\\): one branch inductor (e.g., \\(X_1, Y_1,\\dots\\))\n- \\(C_{\\text{tank}}\\): total capacitance at that tank node (varactor + transistor parasitics + wiring)\n\nSo from the figure alone (no \\(L\\)/\\(C\\) values shown), you can only estimate symbolically as above.  \nIf both cores are identical, they lock and oscillate near the same \\(f_0\\); coupling current mostly sets phase relation (quadrature) and only slightly perturbs frequency.",
        "format": "markdown",
        "sha256": "f61aed652df60a9d515522639e070dd80150c2969e3c650904600d81d9566371"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly gives the tank-resonance frequency and recognizes that coupling perturbs it, but omits the coupling-induced frequency-shift estimate, which is essential to the requested estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 8582,
        "total_tokens": 10383,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8392,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 8582,
        "total_tokens": 10383,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8392,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.3-codex",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **coupled LC (quadrature) oscillator**, so the oscillation is set mainly by each LC tank resonance.\n\n\\[\nf_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{L_{\\text{tank}}\\,C_{\\text{eq}}}}\n\\]\n\n- \\(L_{\\text{tank}}\\): tank inductance seen by one side (or use differential \\(L,C\\) equivalents consistently).\n- \\(C_{\\text{eq}}\\): total tank capacitance (intentional + parasitic MOS/drain/wiring caps).\n\nSo, to first order, both cores lock to this same \\(f_0\\).  \nCoupling transistors (\\(I_1\\) branch) cause only a small pull/shift from \\(f_0\\). Without actual \\(L\\) and \\(C_{\\text{eq}}\\) values, a numeric frequency can’t be computed.",
        "format": "markdown",
        "sha256": "2a25e6e63ce1c47623181f00143558f550f2f61ebb59a07398b68c34925c9465"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the tank resonance and notes that coupling shifts it, but gives no estimate for that shift (such as Δω ≈ αω₀/(2Q)); it therefore provides only the zeroth-order frequency.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 11899,
        "total_tokens": 13700,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 11899,
        "total_tokens": 13700,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
