{
  "model_key": "gpt_54_thinking_high",
  "display_name": "GPT-5.4",
  "provider": "openai",
  "evaluation_model_ids": [],
  "thinking_effort": "xhigh",
  "configuration_note": "GPT-5.4 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (openai/gpt-5.4) at reasoning effort xhigh, the highest it offers. Requests set max_tokens to 128,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for GPT-5.4 on 2026-11-10 ($2.50 input, $0.25 cached input, $15.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 106,
          "incorrect_count": 44,
          "partial_credit_count": 34,
          "zero_count": 10,
          "mean_score_0_to_4": 3.32,
          "score_percent": 83.0,
          "score_distribution": {
            "0": 10,
            "1": 8,
            "2": 12,
            "3": 14,
            "4": 106
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 106,
          "incorrect_count": 44,
          "partial_credit_count": 34,
          "zero_count": 10,
          "mean_score_0_to_4": 3.32,
          "score_percent": 83.0,
          "score_distribution": {
            "0": 10,
            "1": 8,
            "2": 12,
            "3": 14,
            "4": 106
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 77,
          "incorrect_count": 13,
          "partial_credit_count": 5,
          "zero_count": 8,
          "mean_score_0_to_4": 3.588888888888889,
          "score_percent": 89.72222222222223,
          "score_distribution": {
            "0": 8,
            "3": 5,
            "4": 77
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 77,
          "incorrect_count": 13,
          "partial_credit_count": 5,
          "zero_count": 8,
          "mean_score_0_to_4": 3.588888888888889,
          "score_percent": 89.72222222222223,
          "score_distribution": {
            "0": 8,
            "3": 5,
            "4": 77
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 29,
          "incorrect_count": 31,
          "partial_credit_count": 29,
          "zero_count": 2,
          "mean_score_0_to_4": 2.9166666666666665,
          "score_percent": 72.91666666666666,
          "score_distribution": {
            "0": 2,
            "1": 8,
            "2": 12,
            "3": 9,
            "4": 29
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 29,
          "incorrect_count": 31,
          "partial_credit_count": 29,
          "zero_count": 2,
          "mean_score_0_to_4": 2.9166666666666665,
          "score_percent": 72.91666666666666,
          "score_distribution": {
            "0": 2,
            "1": 8,
            "2": 12,
            "3": 9,
            "4": 29
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 35,
        "incorrect_count": 15,
        "partial_credit_count": 12,
        "zero_count": 3,
        "mean_score_0_to_4": 3.3,
        "score_percent": 82.5,
        "score_distribution": {
          "0": 3,
          "1": 3,
          "2": 5,
          "3": 4,
          "4": 35
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 35,
        "incorrect_count": 15,
        "partial_credit_count": 12,
        "zero_count": 3,
        "mean_score_0_to_4": 3.32,
        "score_percent": 83.0,
        "score_distribution": {
          "0": 3,
          "1": 3,
          "2": 4,
          "3": 5,
          "4": 35
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 36,
        "incorrect_count": 14,
        "partial_credit_count": 10,
        "zero_count": 4,
        "mean_score_0_to_4": 3.34,
        "score_percent": 83.5,
        "score_distribution": {
          "0": 4,
          "1": 2,
          "2": 3,
          "3": 5,
          "4": 36
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 43008,
        "input_tokens": 265608,
        "output_tokens": 2096734,
        "total_tokens": 2362342
      },
      "known_totals": {
        "cached_input_tokens": 43008,
        "input_tokens": 265608,
        "output_tokens": 2096734,
        "total_tokens": 2362342
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 26,
          "incorrect_count": 4,
          "partial_credit_count": 2,
          "zero_count": 2,
          "mean_score_0_to_4": 3.6666666666666665,
          "score_percent": 91.66666666666666,
          "score_distribution": {
            "0": 2,
            "3": 2,
            "4": 26
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 26,
          "incorrect_count": 4,
          "partial_credit_count": 1,
          "zero_count": 3,
          "mean_score_0_to_4": 3.566666666666667,
          "score_percent": 89.16666666666667,
          "score_distribution": {
            "0": 3,
            "3": 1,
            "4": 26
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 25,
          "incorrect_count": 5,
          "partial_credit_count": 2,
          "zero_count": 3,
          "mean_score_0_to_4": 3.533333333333333,
          "score_percent": 88.33333333333333,
          "score_distribution": {
            "0": 3,
            "3": 2,
            "4": 25
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 9,
          "incorrect_count": 11,
          "partial_credit_count": 10,
          "zero_count": 1,
          "mean_score_0_to_4": 2.75,
          "score_percent": 68.75,
          "score_distribution": {
            "0": 1,
            "1": 3,
            "2": 5,
            "3": 2,
            "4": 9
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 9,
          "incorrect_count": 11,
          "partial_credit_count": 11,
          "zero_count": 0,
          "mean_score_0_to_4": 2.95,
          "score_percent": 73.75,
          "score_distribution": {
            "1": 3,
            "2": 4,
            "3": 4,
            "4": 9
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 11,
          "incorrect_count": 9,
          "partial_credit_count": 8,
          "zero_count": 1,
          "mean_score_0_to_4": 3.05,
          "score_percent": 76.25,
          "score_distribution": {
            "0": 1,
            "1": 2,
            "2": 3,
            "3": 3,
            "4": 11
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the usual long-channel MOSFET model, the **intrinsic gain** is\n\n\\[\nA_v^{int} = g_m r_o\n\\]\n\nIf you **double both \\(W\\) and \\(L\\)**:\n\n- The ratio \\(W/L\\) stays the **same**\n- So \\(g_m\\) stays about **the same** for the same bias condition\n- But \\(r_o\\) increases roughly **in proportion to \\(L\\)**, because channel-length modulation gets smaller\n\nSo the **intrinsic gain approximately doubles**.\n\n### Short answer:\n**Doubling both width and length makes the intrinsic gain about 2× larger**  \n(under the standard approximation; width has little effect, length improves gain).",
        "format": "markdown",
        "sha256": "9997ad36a4d1170ca7dd58291ebd906209efe2a2daa0fcaf69a903df1f1cdbaf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies intrinsic gain as gm·ro and explains that doubling both dimensions keeps W/L and gm approximately unchanged while increased length raises ro, approximately doubling gain under the stated standard bias assumptions.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 675,
        "total_tokens": 701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 675,
        "total_tokens": 701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Approximately, it **doubles**.\n\nReason:\n\n- Intrinsic gain is  \n  \\[\n  A_{int} = g_m r_o = \\frac{g_m}{g_{ds}}\n  \\]\n- If you **double both \\(W\\) and \\(L\\)**, the ratio \\(W/L\\) stays the same.\n  - So for the **same bias condition**, \\(I_D\\) and \\(g_m\\) stay about the same.\n- But increasing **\\(L\\)** reduces channel-length modulation:\n  - \\(\\lambda \\propto 1/L\\)\n  - so \\(r_o \\approx 1/(\\lambda I_D)\\) roughly **doubles** when \\(L\\) doubles.\n\nTherefore:\n\n\\[\ng_m \\text{ unchanged}, \\quad r_o \\to 2r_o\n\\quad \\Rightarrow \\quad\nA_{int} = g_m r_o \\to 2A_{int}\n\\]\n\nSo, **doubling both width and length gives roughly 2× higher intrinsic gain**, assuming long-channel behavior and same bias.",
        "format": "markdown",
        "sha256": "b5b05bd6e10b73820f64ddd1d6990c4cc1282bcd6e45783ca5e4c0b1e8debbab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with W/L and overdrive held constant, gm and ID stay roughly unchanged while ro increases as channel length doubles. The stated assumptions are appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1052,
        "total_tokens": 1078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 820,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1052,
        "total_tokens": 1078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 820,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Approximately, it **doubles**.\n\nReason:\n- Intrinsic gain is \\(A_{int} = g_m r_o = \\dfrac{g_m}{g_{ds}}\\).\n- If you double **both** \\(W\\) and \\(L\\), the ratio \\(W/L\\) stays the same.\n- So for the same bias, \\(g_m\\) stays about **unchanged**.\n- But increasing \\(L\\) reduces channel-length modulation, so \\(r_o\\) increases roughly **proportional to \\(L\\)**.\n\nSo:\n- **\\(W\\):** little first-order effect on intrinsic gain\n- **\\(L\\):** main effect, gives about **2× higher intrinsic gain**\n\nThis is the usual **long-channel approximation**; in short-channel MOSFETs, the improvement may be less than exactly 2×.",
        "format": "markdown",
        "sha256": "395fbc34e281ec64ac12990a4677c3c1c75158b55d544983192b7772b3dcb015"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: doubling both dimensions keeps W/L and gm approximately unchanged, while the longer channel raises ro. The short-channel caveat is compatible with the stated approximation.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1737,
        "total_tokens": 1763,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1737,
        "total_tokens": 1763,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the MOSFET is in the usual **strong-inversion saturation** region, **both can be right**, depending on what is being held constant.\n\n\\[\nI_D=\\frac{1}{2}\\beta V_{OV}^2,\\qquad\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}=\\beta V_{OV}=\\frac{2I_D}{V_{OV}}\n\\]\n\nwhere \\(V_{OV}=V_{GS}-V_{TH}\\).\n\n- **If the device itself is fixed** (\\(\\beta\\) fixed) and you increase \\(V_{OV}\\) by raising \\(V_{GS}\\), then  \n  \\[\n  g_m=\\beta V_{OV}\n  \\]\n  so **\\(g_m\\) increases**.  \n  **Student A is correct** in this sense.\n\n- **If the drain current \\(I_D\\) is held fixed**, then  \n  \\[\n  g_m=\\frac{2I_D}{V_{OV}}\n  \\]\n  so **\\(g_m\\) decreases as \\(V_{OV}\\) increases**.  \n  **Student B is correct** in this sense.\n\nSo the disagreement comes from missing context.  \nUsually, when people say “\\(g_m\\) goes down with larger overdrive,” they often really mean **\\(g_m/I_D\\)** goes down.",
        "format": "markdown",
        "sha256": "57b55a46a94f6a2d09ee4df2241f4574b2de427a1b45832bd94f781510cb2fc3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size, derives that gm increases with VOV, and explains that Student B is right only when ID is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2646,
        "total_tokens": 2684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2354,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2646,
        "total_tokens": 2684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2354,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be correct — it depends on what is being held constant.\n\nFor a long-channel MOSFET in saturation,\n\n\\[\nI_D=\\frac{1}{2}kV_{OV}^2\n\\]\n\nso\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}=kV_{OV}=\\frac{2I_D}{V_{OV}}\n\\]\n\nwhere \\(V_{OV}=V_{GS}-V_T\\).\n\nSo:\n\n- **If it’s the same transistor and you increase \\(V_{OV}\\) by increasing \\(V_{GS}\\):**  \n  \\[\n  g_m = kV_{OV}\n  \\]\n  so **\\(g_m\\) goes up**.  \n  **Student A is correct.**\n\n- **If you compare cases at the same drain current \\(I_D\\):**  \n  \\[\n  g_m = \\frac{2I_D}{V_{OV}}\n  \\]\n  so **\\(g_m\\) goes down as \\(V_{OV}\\) increases**.  \n  **Student B is correct.**\n\nAlso, the quantity\n\n\\[\n\\frac{g_m}{I_D}=\\frac{2}{V_{OV}}\n\\]\n\nalways **decreases** as \\(V_{OV}\\) increases, so B may be thinking of **transconductance efficiency** rather than \\(g_m\\) itself.\n\nSo the best answer is: **the question is ambiguous; both can be right depending on the context.**",
        "format": "markdown",
        "sha256": "dded1117a5e5b0f04a18dbb28d596e873dab8305938e7d4094549878549cd1f0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says that for a fixed transistor, increasing overdrive increases gm, so Student A is right. It also correctly explains that gm can decrease with overdrive when drain current is held fixed; the context qualification does not undermine the central answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2390,
        "total_tokens": 2428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2390,
        "total_tokens": 2428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be correct, depending on what is being held constant.\n\nFor a long-channel MOSFET in saturation,\n\n\\[\nI_D=\\frac{1}{2}k(V_{OV})^2\n\\]\n\nso\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}=kV_{OV}\n\\]\n\nThat means:\n\n- **If the device is fixed** and you increase \\(V_{OV}=V_{GS}-V_T\\) by raising \\(V_{GS}\\), then **\\(g_m\\) increases**.\n- In that sense, **Student A is correct**.\n\nBut since\n\n\\[\ng_m=\\frac{2I_D}{V_{OV}}\n\\]\n\nif you compare cases at the **same drain current \\(I_D\\)**, then increasing \\(V_{OV}\\) makes **\\(g_m\\) decrease**.\n\n- In that sense, **Student B is correct**.\n\nSo the real answer is:\n\n- **Fixed device, varying bias:** \\(g_m\\) goes **up** with \\(V_{OV}\\)\n- **Fixed drain current:** \\(g_m\\) goes **down** with \\(V_{OV}\\)\n\nOften this confusion comes from mixing up **\\(g_m\\)** with **\\(g_m/I_D\\)**, since\n\n\\[\n\\frac{g_m}{I_D}=\\frac{2}{V_{OV}}\n\\]\n\nwhich definitely **decreases** as \\(V_{OV}\\) increases.",
        "format": "markdown",
        "sha256": "bbc14648d83200f44cdb9bb88f91925d1c10597d314f97d8f5dc7754722e27a0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device, explains that gm increases with VOV, and correctly notes Student B's result applies when ID is held constant.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 830,
        "total_tokens": 868,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 830,
        "total_tokens": 868,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not exactly, but **it is the same in form**.\n\nA PMOS small-signal model has the same basic elements as an NMOS model:\n\n- gate is open-circuit\n- \\(g_m\\)-controlled current source\n- output resistance \\(r_o\\)\n- optional body-effect source \\(g_{mb}\\)\n\nThe difference is **polarity/sign convention**:\n\n- NMOS is usually written with \\(v_{gs}, v_{ds}, i_d\\)\n- PMOS is more naturally written with \\(v_{sg}, v_{sd}, i_{sd}\\)\n\nSo if you use PMOS-friendly variables, its model is **formally identical** to NMOS.  \nIf you insist on using NMOS-style voltage/current references, then some **signs or current-source directions reverse**.\n\nA compact way to say it:\n\n\\[\n\\text{NMOS: } i_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}\n\\]\n\n\\[\n\\text{PMOS: } i_{sd} = g_m v_{sg} + \\frac{v_{sd}}{r_o}\n\\]\n\nSo the answer is: **same structure, opposite polarities.**",
        "format": "markdown",
        "sha256": "e366cec40e470cbd1884a669bb018c6ffa158e264ecddc3172a29a6d9e9e85b7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model, with polarity and sign conventions adjusted.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 4354,
        "total_tokens": 4380,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4096,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 4354,
        "total_tokens": 4380,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4096,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not exactly — but it is the same **form**.\n\nFor both NMOS and PMOS, the small-signal model has the same basic pieces:\n\n- essentially infinite gate resistance\n- a transconductance source \\(g_m\\)\n- output resistance \\(r_o\\)\n- optionally body-effect term \\(g_{mb}\\)\n- parasitic capacitances in the same kinds of places\n\nThe difference is in the **polarity/sign conventions**:\n\n- NMOS is usually written with \\(v_{gs}\\), \\(v_{ds}\\), and current from **drain to source**\n- PMOS is usually written with \\(v_{sg}\\), \\(v_{sd}\\), and current from **source to drain**\n\nSo a PMOS small-signal model is basically the **sign-reversed / mirrored version** of the NMOS model.\n\nAlso, the **parameter values** are not generally the same:\n- \\(k_p \\neq k_n\\)\n- hole mobility is lower than electron mobility\n- threshold voltage sign is opposite\n- \\(g_m\\), \\(r_o\\), etc. will usually have different magnitudes for a given geometry/bias\n\nSo the best short answer is:\n\n**Same structure, different polarity/sign conventions, and usually different parameter values.**",
        "format": "markdown",
        "sha256": "3792d95ac29f5f3cf6b2840b0118da32e6da3a5d7015b4791529c03b3930bdc9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form, with polarity and sign-convention differences; the additional parameter-value distinction is consistent.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3746,
        "total_tokens": 3772,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3481,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3746,
        "total_tokens": 3772,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3481,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not exactly, but **the form is the same**.\n\n- Both NMOS and PMOS small-signal models use the same elements:\n  - transconductance \\(g_m\\)\n  - output resistance \\(r_o\\)\n  - optionally body-effect transconductance \\(g_{mb}\\)\n\n- The difference is in the **polarity/sign conventions**:\n  - PMOS is biased with opposite terminal voltages compared to NMOS.\n  - If you write the PMOS model using \\(v_{sg}\\) and source-to-drain current, the controlled current source points opposite to the NMOS case.\n  - If you keep the usual “current into the drain” convention, the small-signal equations can be written in the **same mathematical form** as for NMOS.\n\nSo the best answer is:\n\n**Same structure, but not literally identical unless you use consistent sign conventions.**  \nAlso, the actual parameter values (\\(g_m\\), \\(r_o\\), etc.) are usually different because PMOS and NMOS have different device constants.\n\nIf you want, I can draw the NMOS and PMOS small-signal models side by side.",
        "format": "markdown",
        "sha256": "257f8e57445435eb45d0e3e1f37112ba502268a11f6fd9210767c6e2666fa5f2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model, with polarity and sign conventions handled consistently.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3349,
        "total_tokens": 3375,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3349,
        "total_tokens": 3375,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **enhancement NMOS**, its **gate and drain are shorted**, so this is a **diode-connected MOSFET**.\n\n### Key relations\nSince the top node is at \\(V_X\\),\n\n\\[\nV_G = V_D = V_X,\\qquad V_S = 0\n\\]\n\nso\n\n\\[\nV_{GS}=V_{DS}=V_X\n\\]\n\nAlso, gate current is essentially zero, so\n\n\\[\nI_X = I_D\n\\]\n\n### Region of operation\n- For \\(V_X < V_T\\): transistor is off  \n  \\[\n  I_X \\approx 0\n  \\]\n\n- For \\(V_X \\ge V_T\\): transistor is on, and because \\(V_{DS}=V_{GS}\\), it is always in **saturation**  \n  \\[\n  I_X = \\frac{1}{2}\\beta_n (V_X - V_T)^2\n  \\]\n  where \\(\\beta_n = \\mu_n C_{ox}\\frac{W}{L}\\).\n\nSo the \\(I_X\\)-vs-\\(V_X\\) curve is:\n\n- nearly zero up to \\(V_T\\)\n- then rises as a **parabola** for \\(V_X > V_T\\)\n\n### Sketch shape\n```text\nI_X\n ^\n |                         .\n |                      . \n |                   .\n |                .\n |             .\n |____________.____________________> V_X\n              V_T\n```\n\n### Note\nIf your course includes the **body diode**, then for sufficiently **negative \\(V_X\\)** the body diode conducts, giving a large **negative** \\(I_X\\). Otherwise, for the ideal MOS model, just sketch \\(I_X \\approx 0\\) for all \\(V_X < V_T\\).",
        "format": "markdown",
        "sha256": "8bd376a80969781ceccb1ae015b5df0663bd437c485ea2eab18f242242ecac0d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives approximately zero current below threshold, followed by a quadratic rise in saturation above threshold. The negative-voltage body-diode note is secondary.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 6076,
        "total_tokens": 7282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5686,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 6076,
        "total_tokens": 7282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5686,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) is a **diode-connected NMOS** because its **gate and drain are tied together**.\n\nSo\n\n\\[\nV_G=V_D=V_X,\\qquad V_S=0\n\\]\n\nhence\n\n\\[\nV_{GS}=V_{DS}=V_X\n\\]\n\nand whenever the transistor is on, it is **always in saturation**, since\n\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\]\n\nis automatically true.\n\nTherefore, neglecting subthreshold current and channel-length modulation,\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X < V_T \\\\[4pt]\n\\dfrac{1}{2}k_n (V_X-V_T)^2, & V_X \\ge V_T\n\\end{cases}\n\\]\n\nwith \\(k_n=\\mu_n C_{ox}(W/L)\\).\n\n### Sketch\n- For \\(V_X<V_T\\): \\(I_X \\approx 0\\)\n- At \\(V_X=V_T\\): current starts\n- For \\(V_X>V_T\\): \\(I_X\\) rises **parabolically**\n\nSo the \\(I_X\\)-vs-\\(V_X\\) curve is:\n\n- flat at zero until \\(V_T\\)\n- then curves upward like a square-law parabola\n\n#### Qualitative plot\n```text\nIx\n^\n|                         .\n|                      .´\n|                   .´\n|                .´\n|______________.__________________> Vx\n              VT\n```\n\nIf your course includes the **body diode**, then for sufficiently **negative** \\(V_X\\) (about \\(-0.7\\text{ V}\\)) there will also be a large **negative** current branch. But in the ideal MOS model, the sketch above is the expected answer.",
        "format": "markdown",
        "sha256": "524bb18cf3253788019ecd350d2c532a3e6249313508aa82eca8cb40ea8ddbe5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its saturation operation above threshold, and the quadratic current rise. The negative-voltage body-diode note is secondary and does not detract.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 4817,
        "total_tokens": 6023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 4817,
        "total_tokens": 6023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **diode-connected NMOS** (\\(D\\) and \\(G\\) tied together), with source at ground.\n\nSo\n\n\\[\nV_{GS}=V_{DS}=V_X\n\\]\n\nFor an NMOS to conduct, \\(V_{GS}\\ge V_{TN}\\). Thus:\n\n- **If \\(V_X < V_{TN}\\):** transistor is off, so \\(I_X \\approx 0\\)\n- **If \\(V_X \\ge V_{TN}\\):** transistor is on\n\nAlso, when it is on, it is automatically in saturation because\n\n\\[\nV_{DS} = V_{GS} \\ge V_{GS}-V_{TN}\n\\]\n\nSo the current is\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X < V_{TN} \\\\\n\\dfrac{1}{2}k_n (V_X-V_{TN})^2, & V_X \\ge V_{TN}\n\\end{cases}\n\\]\n\n(ignoring channel-length modulation)\n\n### Sketch\n- \\(I_X=0\\) until \\(V_X=V_{TN}\\)\n- then \\(I_X\\) rises **quadratically** with \\(V_X\\)\n\n```\nI_X\n ^\n |                         .\n |                      .´\n |                   .´\n |                .´\n |             .´\n |___________.__________________> V_X\n            V_TN\n```\n\nSo the curve looks like a MOS “diode”: zero current up to threshold, then an upward-curving parabola.\n\nIf you want, I can also include the effect of body diode / negative \\(V_X\\).",
        "format": "markdown",
        "sha256": "b6fdb39e0b64c158ee42527a5ccdecc5d329165897dc7303936d701cf1ce42a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold, and shows a quadratic rise above threshold in saturation.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 3458,
        "total_tokens": 4664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 3458,
        "total_tokens": 4664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an enhancement NMOS and ignore channel-length modulation.\n\nSince\n\n- source is at ground \\(\\Rightarrow V_S=0\\)\n- drain is tied to \\(+1\\text{ V}\\) \\(\\Rightarrow V_D=1\\text{ V}\\)\n\nwe have\n\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\text{ V}\n\\]\n\nand \\(I_X\\) is just the drain current.\n\n### Piecewise behavior\n\nLet the threshold be \\(V_T\\). Then:\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\le V_T \\\\[4pt]\n\\dfrac{\\beta_n}{2}(V_X-V_T)^2, & V_T < V_X \\le V_T+1\\text{ V} \\\\[8pt]\n\\beta_n\\!\\left[(V_X-V_T)(1\\text{ V})-\\dfrac{(1\\text{ V})^2}{2}\\right], & V_X > V_T+1\\text{ V}\n\\end{cases}\n\\]\n\nSo the sketch is:\n\n- **zero** until \\(V_X=V_T\\)\n- then **rises quadratically**\n- after \\(V_X=V_T+1\\text{ V}\\), it becomes **linear** in \\(V_X\\)\n\n### Qualitative sketch\n\n```text\nI_X\n ^\n |                               /\n |                            __/\n |                         __/\n |                      __/\n |                   __\n |__________________/__________________> V_X\n                  V_T          V_T+1\n```\n\nSo: **flat at 0**, then **parabolic**, then **straight line**.",
        "format": "markdown",
        "sha256": "93da8c7eb5104263d6dca0af0a504478c6b2d6897c22c0ecf5832c1192a24f70"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the off, saturation, and triode regions and gives the required quadratic rise followed by a roughly linear rise beyond VX = VT + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 9564,
        "total_tokens": 10933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 9564,
        "total_tokens": 10933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **nMOS** with source at ground and drain tied to \\(+1\\text{ V}\\):\n\n- \\(V_{GS}=V_X\\)\n- \\(V_{DS}=1\\text{ V}\\)\n- \\(I_X = I_D\\)\n\nSo the current depends on the MOSFET region of operation.\n\n## 1) Cutoff\nIf\n\\[\nV_X < V_T\n\\]\nthen the transistor is off, so\n\\[\nI_X \\approx 0\n\\]\n\n## 2) Saturation\nIf\n\\[\nV_T \\le V_X \\le V_T+1\n\\]\nthen\n\\[\nV_{DS}=1 \\ge V_{GS}-V_T\n\\]\nso the MOSFET is in saturation:\n\\[\nI_X=\\frac{1}{2}\\beta_n (V_X-V_T)^2\n\\]\n\n## 3) Triode\nIf\n\\[\nV_X \\ge V_T+1\n\\]\nthen\n\\[\nV_{DS}=1 < V_{GS}-V_T\n\\]\nso it is in triode:\n\\[\nI_X=\\beta_n\\!\\left[(V_X-V_T)(1)-\\frac{1}{2}(1)^2\\right]\n\\]\nor\n\\[\nI_X=\\beta_n\\left(V_X-V_T-\\frac12\\right)\n\\]\n\nwhere \\(\\beta_n=\\mu_n C_{ox}(W/L)\\).\n\n---\n\n## Sketch shape\nSo the \\(I_X\\)–\\(V_X\\) curve is:\n\n- **zero** for \\(V_X<V_T\\)\n- then a **parabola** starting at \\(V_X=V_T\\)\n- then after \\(V_X=V_T+1\\), it becomes a **straight line**\n\n### Rough sketch\n\n```text\nIx\n^\n|                             /\n|                          ./\n|                       ./\n|                    ./\n|                 ./\n|              ./\n|___________.____________________> Vx\n           VT      VT + 1\n```\n\n- flat at 0 until \\(V_T\\)\n- curved upward between \\(V_T\\) and \\(V_T+1\\)\n- linear for \\(V_X>V_T+1\\)\n\nIf you want, I can also draw a cleaner labeled graph with the equations marked on each segment.",
        "format": "markdown",
        "sha256": "508f5212d6544a1f2f64e2e0a182ad1ea399f7feeba06cbaa40735fb47f00f1f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, the quadratic saturation-region rise up to V_T+1 V, and the roughly linear triode-region rise beyond it.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 3610,
        "total_tokens": 4979,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 3610,
        "total_tokens": 4979,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an enhancement NMOS, with source/body at ground.\n\nThen\n\n- \\(V_{GS}=V_X\\)\n- \\(V_{DS}=1\\,\\text{V}\\)\n- \\(I_X\\) is the drain current\n\nSo the MOSFET regions are:\n\n### 1) Cutoff\nIf \\(V_X<V_T\\),\n\n\\[\nI_X \\approx 0\n\\]\n\n### 2) Saturation\nIf \\(V_T \\le V_X \\le V_T+1\\),\n\n\\[\nI_X=\\frac{\\beta}{2}(V_X-V_T)^2\n\\]\n\nbecause \\(V_{DS}=1 \\ge V_{GS}-V_T\\).\n\n### 3) Triode (linear)\nIf \\(V_X \\ge V_T+1\\),\n\n\\[\nI_X=\\beta\\left[(V_X-V_T)(1)-\\frac{1^2}{2}\\right]\n=\\beta\\left(V_X-V_T-\\frac12\\right)\n\\]\n\nwhere \\(\\beta=\\mu_n C_{ox}\\frac{W}{L}\\).\n\n---\n\n## Sketch\n\nSo \\(I_X\\) vs. \\(V_X\\) is:\n\n- **zero** until \\(V_X=V_T\\)\n- then a **parabolic rise**\n- after \\(V_X=V_T+1\\), it becomes a **straight line**\n\n```text\nI_X\n ^\n |                              /\n |                            /\n |                          /\n |                       .-'\n |                    .-'\n |                 .-'\n |______________.-'__________________> V_X\n               V_T      V_T+1\n```\n\nSo the curve is: **flat → quadratic → linear**.\n\nIf you want, I can also draw it with region labels (cutoff, saturation, triode).",
        "format": "markdown",
        "sha256": "7382c3a2bba22c9fafd2ecbd3cc2d4a06b78dfae41d0791f9b39248dd83691ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions and gives the required quadratic rise from V_T to V_T+1 V followed by a roughly linear rise.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 6081,
        "total_tokens": 7450,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 6081,
        "total_tokens": 7450,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No.\n\nAs drawn, this is a **diode-connected pMOS**: its **gate and drain are both grounded**, and the top terminal is the **source/output port**.\n\nSo if the top-node voltage is \\(V_X\\),\n\n- \\(V_G = 0\\)\n- \\(V_D = 0\\)\n- \\(V_S = V_X\\)\n\nHence,\n\n\\[\nV_{SG} = V_X,\\qquad V_{SD} = V_X\n\\]\n\nWhen \\(V_X > |V_{TP}|\\), the device turns on, and although it is in saturation, its current is\n\n\\[\nI_X \\approx \\frac{1}{2}k_p\\,(V_X-|V_{TP}|)^2\n\\]\n\n(ignoring channel-length modulation).\n\nSo \\(I_X\\) **depends strongly on \\(V_X\\)**. That means it is **not** acting like a current source, whose current should be nearly independent of terminal voltage.\n\nSo the correct takeaway is:\n\n- **always in saturation when on** → yes  \n- **acts as a current source** → **no**\n\nIt behaves more like a **nonlinear diode/resistor**, not a current source.",
        "format": "markdown",
        "sha256": "329987f4ff719057707674e501a62d9c21366fbc6161b270ff1aa30928541c56"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the PMOS, its grounded gate and drain, and concludes that its voltage-dependent current cannot act as a current source. However, it omits the key low-output-impedance explanation (about 1/gm) required for full credit.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 14190,
        "total_tokens": 14690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13935,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 14190,
        "total_tokens": 14690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13935,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not as drawn.\n\nAssuming the standard symbol, this is a **diode-connected pMOS**: its **gate and drain are both grounded**. In that connection,\n\n\\[\nV_{SG}=V_X,\\qquad V_{SD}=V_X\n\\]\n\nso when it turns on, its current is roughly\n\n\\[\nI_X \\approx \\frac{1}{2}k_p\\,(V_X-|V_{TP}|)^2\n\\]\n\n(ignoring channel-length modulation).\n\nSo the current is **set by the terminal voltage \\(V_X\\)**. That means it does **not** behave like a current source, whose current should stay nearly constant as terminal voltage changes.\n\nSo:\n\n- **MOSFETs can be used as current sources**, but only with a **separate gate bias** and the **output taken at the drain**.\n- **This specific connection** behaves more like a **nonlinear resistor / diode-connected transistor**, not a current source.\n\nIf anything, from node \\(X\\)'s point of view, it **draws** current to ground rather than sourcing a constant current.",
        "format": "markdown",
        "sha256": "f17a1c2fcc156dee5778f299d805392007074de6807eb0f731ca53cf6940857e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the diode-connected PMOS and its grounded gate/drain, and explains that its current depends on VX, so it is not a current source. It omits the key low-small-signal-impedance point (about 1/gm) emphasized by the golden solution.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 10405,
        "total_tokens": 10905,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10169,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 10405,
        "total_tokens": 10905,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10169,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—if that symbol is a **depletion-mode FET/JFET**.\n\nWith gate and source both at ground, \\(V_{GS}=0\\). For a JFET or depletion MOSFET, that gives a nonzero drain current, and once the top-terminal voltage is high enough to keep the device in saturation/pinch-off, the current \\(I_X\\) is **approximately constant**.\n\nSo it can act as a **current regulator**—more precisely, as a **current sink** from the top node to ground.\n\nBut:\n\n- If it is an **ordinary enhancement-mode MOSFET**, then \\(V_{GS}=0\\) means it is **off**, so **no**.\n- Even for a depletion/JFET, it is **not an ideal current source**: the current depends somewhat on voltage, temperature, and device variations.\n\nSo the short answer is:\n\n- **Yes, approximately, if it is a depletion-mode FET/JFET.**\n- **No, if it is a standard enhancement MOSFET.**\n- **And strictly speaking, as drawn it is a current sink, not a sourcing element.**",
        "format": "markdown",
        "sha256": "76f96f828908297e8d873d82888272e7441e5c7bb95d2c0f35e22ad4cddb93d3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misreads the connections and device: the figure shows a diode-connected PMOS, not a depletion-mode FET with gate and source grounded. It misses the key low-impedance behavior and instead claims a depletion/JFET version could act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 9637,
        "total_tokens": 10137,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9392,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 9637,
        "total_tokens": 10137,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9392,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is a **pMOS** transistor, this is a **common-source stage with source degeneration**:\n\n- source \\(\\to R_S \\to V_{DD}\\)\n- drain \\(\\to R_D \\to \\text{ground}\\)\n- input at gate\n- output at drain\n\nSo it is the pMOS dual of the usual nMOS common-source amplifier.\n\n## 1) DC relations\n\nLet \\(I\\) be the DC current flowing from \\(V_{DD}\\) through \\(R_S\\), \\(M_1\\), and \\(R_D\\) to ground.\n\nThen\n\n\\[\nV_S = V_{DD} - I R_S\n\\]\n\n\\[\nV_{out}=V_D = I R_D\n\\]\n\n\\[\nV_{SG} = V_S - V_{in}\n\\]\n\n\\[\nV_{SD} = V_S - V_D = V_{DD} - I(R_S+R_D)\n\\]\n\nThese four equations describe the bias point.\n\n---\n\n## 2) Regions of operation\n\n### Cutoff\nThe pMOS is off when\n\n\\[\nV_{SG} \\le |V_T|\n\\]\n\nSince in cutoff \\(I=0\\), we get \\(V_S=V_{DD}\\), so the approximate cutoff condition is\n\n\\[\nV_{in} \\ge V_{DD} - |V_T|\n\\]\n\nThen\n\n\\[\nI \\approx 0,\\qquad V_{out}\\approx 0\n\\]\n\nSo a **high input turns the transistor off and the output goes low**.\n\n---\n\n### Saturation\nIf the device is on and in saturation,\n\n\\[\nI = \\frac{\\beta_p}{2}(V_{SG}-|V_T|)^2\n\\]\n\nso\n\n\\[\nI = \\frac{\\beta_p}{2}\\big(V_{DD}-V_{in}-|V_T|-IR_S\\big)^2\n\\]\n\nThis is the DC current equation in saturation.\n\nThe saturation condition is\n\n\\[\nV_{SD} \\ge V_{SG}-|V_T|\n\\]\n\nwhich simplifies nicely to\n\n\\[\nV_{out} \\le V_{in}+|V_T|\n\\]\n\n---\n\n### Triode\nIf the device is on but\n\n\\[\nV_{out} > V_{in}+|V_T|\n\\]\n\nthen it is in triode, and\n\n\\[\nI=\\beta_p\\left[(V_{SG}-|V_T|)V_{SD}-\\frac{V_{SD}^2}{2}\\right]\n\\]\n\nFor very low \\(V_{in}\\), the pMOS becomes strongly on and behaves almost like a short, so the output approaches the divider value\n\n\\[\nV_{out,\\max}\\approx V_{DD}\\frac{R_D}{R_S+R_D}\n\\]\n\nSo this circuit does invert, but it is **not rail-to-rail** unless \\(R_S \\ll R_D\\).\n\n---\n\n## 3) Small-signal gain\n\nBias the transistor in saturation and linearize around the Q-point.\n\nLet\n\n- \\(g_m\\) = transconductance at the bias point\n- \\(r_o\\) = small-signal output resistance of the MOSFET\n\n### First-order result \\((r_o \\to \\infty)\\)\n\n\\[\nA_v = \\frac{v_{out}}{v_{in}} \\approx -\\frac{g_m R_D}{1+g_m R_S}\n\\]\n\nThis is the key result.\n\n- The gain is **negative**.\n- \\(R_S\\) reduces the gain through **source degeneration**.\n\nIf \\(g_m R_S \\gg 1\\), then\n\n\\[\nA_v \\approx -\\frac{R_D}{R_S}\n\\]\n\nso the gain becomes set mostly by resistor ratio, which is more stable and linear.\n\n---\n\n### With finite \\(r_o\\)\n\n\\[\nA_v = -\\frac{g_m R_D r_o}{R_S+R_D+r_o+g_m R_S r_o}\n\\]\n\nThis reduces to the previous formula when \\(r_o\\) is large.\n\n---\n\n## 4) Input and output resistances\n\n### Input resistance\nMOS gate current is ideally zero, so\n\n\\[\nR_{in} \\approx \\infty\n\\]\n\n### Output resistance\nWith the input AC-grounded,\n\n\\[\nR_{out} \\approx R_D \\parallel \\big(r_o + R_S + g_m r_o R_S\\big)\n\\]\n\nSo source degeneration increases the transistor’s effective output resistance.\n\n---\n\n## 5) Physical interpretation\n\nAs \\(V_{in}\\) increases:\n\n1. \\(V_{SG}\\) decreases\n2. pMOS current decreases\n3. current through \\(R_D\\) decreases\n4. \\(V_{out}=IR_D\\) decreases\n\nSo the stage is **inverting**.\n\nAlso, \\(R_S\\) provides **local negative feedback**:\n\n- if current increases, the source voltage drops\n- that reduces \\(V_{SG}\\)\n- which opposes the current increase\n\nHence \\(R_S\\):\n\n- stabilizes the bias\n- improves linearity\n- reduces gain\n\n---\n\n## Final summary\n\nThis circuit is a **pMOS common-source amplifier/inverter with source degeneration**.\n\n### Most important equations\n\\[\nV_S = V_{DD}-IR_S,\\qquad V_{out}=IR_D\n\\]\n\n\\[\nI=\\frac{\\beta_p}{2}\\big(V_{DD}-V_{in}-|V_T|-IR_S\\big)^2\n\\quad \\text{(in saturation)}\n\\]\n\n\\[\nA_v \\approx -\\frac{g_m R_D}{1+g_m R_S}\n\\]\n\nIf you want, I can also give:\n\n1. the **full transfer characteristic** \\(V_{out}(V_{in})\\), or  \n2. the **small-signal equivalent circuit** and derive the gain step by step.",
        "format": "markdown",
        "sha256": "caf582e1358043b00b3e3d470a271ea897f6e934352a23b342ecfb49d1a825c9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain \\(-g_mR_D/(1+g_mR_S)\\), satisfying the full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 22958,
        "total_tokens": 24384,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 22958,
        "total_tokens": 24384,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is a **pMOS** transistor, this is a **common-source amplifier with source degeneration**.\n\n## 1) DC relations\n\nLet \\(I\\) be the current magnitude through \\(M_1\\), \\(R_S\\), and \\(R_D\\).\n\nThen\n\n\\[\nV_S = V_{DD} - I R_S\n\\]\n\n\\[\nV_D = V_{out} = I R_D\n\\]\n\n\\[\nV_{SG} = V_S - V_{in} = V_{DD} - I R_S - V_{in}\n\\]\n\n\\[\nV_{SD} = V_S - V_D = V_{DD} - I(R_S+R_D)\n\\]\n\n---\n\n## 2) Region of operation\n\n### Cutoff\nThe pMOS turns off when\n\n\\[\nV_{SG} \\le |V_T|\n\\]\n\nIf it is off, \\(I=0\\), so\n\n\\[\nV_S = V_{DD}, \\qquad V_{out}=0\n\\]\n\nThus cutoff begins approximately when\n\n\\[\nV_{in} \\ge V_{DD} - |V_T|\n\\]\n\n---\n\n### Saturation\nIf the pMOS is on and in saturation,\n\n\\[\nI=\\frac{k_p}{2}(V_{SG}-|V_T|)^2\n\\]\n\nso\n\n\\[\nI=\\frac{k_p}{2}\\big(V_{DD}-I R_S -V_{in}-|V_T|\\big)^2\n\\]\n\nThis is the bias equation for the operating point.\n\nThe saturation condition is\n\n\\[\nV_{SD} \\ge V_{SG} - |V_T|\n\\]\n\nwhich simplifies to\n\n\\[\nV_{out} \\le V_{in}+|V_T|\n\\]\n\nSo for amplification, the transistor should be biased so this holds.\n\n---\n\n### Triode\nIf\n\n\\[\nV_{out} > V_{in}+|V_T|\n\\]\n\nthe device enters triode.\n\nFor very low \\(V_{in}\\), \\(M_1\\) turns on hard and \\(V_{out}\\) tends toward the resistor-divider limit\n\n\\[\nV_{out,\\max} \\approx V_{DD}\\frac{R_D}{R_S+R_D}\n\\]\n\n---\n\n## 3) Small-signal analysis\n\nBias the transistor in saturation at some quiescent current \\(I_Q\\). Then\n\n\\[\ng_m = \\frac{2I_Q}{V_{OV}} = \\sqrt{2k_p I_Q}\n\\]\n\nwith \\(V_{OV}=V_{SGQ}-|V_T|\\).\n\nSince \\(V_{DD}\\) is AC ground, \\(R_S\\) is a **source degeneration resistor**.\n\nIgnoring channel-length modulation (\\(r_o \\to \\infty\\)):\n\n\\[\nA_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_m R_D}{1+g_m R_S}\n\\]\n\nSo:\n\n- the gain is **negative** (inverting stage),\n- \\(R_S\\) reduces gain,\n- \\(R_S\\) improves bias stability and linearity.\n\nA useful interpretation is\n\n\\[\ng_{m,\\text{eff}}=\\frac{g_m}{1+g_mR_S}\n\\]\n\nso\n\n\\[\nA_v = -g_{m,\\text{eff}}R_D\n\\]\n\nIf \\(g_mR_S \\gg 1\\),\n\n\\[\nA_v \\approx -\\frac{R_D}{R_S}\n\\]\n\nwhich makes the gain less sensitive to transistor parameters.\n\n---\n\n## 4) Input and output resistance\n\n- **Input resistance**:\n\n\\[\nR_{in} \\approx \\infty\n\\]\n\nbecause the MOS gate draws essentially no current.\n\n- **Output resistance** (ideal MOS, neglect \\(r_o\\)):\n\n\\[\nR_{out} \\approx R_D\n\\]\n\n---\n\n## 5) If finite \\(r_o\\) is included\n\nThe more accurate gain is\n\n\\[\nA_v = -\\frac{g_m R_D r_o}{R_D + R_S + r_o + g_m R_S r_o}\n\\]\n\nand the output resistance is\n\n\\[\nR_{out} = R_D \\parallel \\big[r_o + R_S(1+g_m r_o)\\big]\n\\]\n\n---\n\n## 6) Qualitative behavior\n\n- Increasing \\(V_{in}\\) makes the pMOS **less on**\n- \\(I\\) decreases\n- voltage across \\(R_D\\) decreases\n- therefore \\(V_{out}\\) **decreases**\n\nSo the circuit is an **inverting amplifier**.\n\n---\n\nIf you want, I can also derive the **full \\(V_{out}\\)-vs-\\(V_{in}\\) transfer characteristic** piecewise.",
        "format": "markdown",
        "sha256": "870d44444b55f4d720b560911547af494976da153e80abf5e7ea21458b8a6a8f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies the device as a pMOS common-source stage with source degeneration and gives the correct inverting gain, \u001b[0m−gmRD/(1 + gmRS). The additional body-effect and finite-ro refinements are consistent with the topology.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 17069,
        "total_tokens": 18495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 17069,
        "total_tokens": 18495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is a **pMOS** transistor (as drawn, with its source at the top), this is a **source-degenerated common-source stage**.\n\n## 1) DC relations\n\nLet \\(I\\) be the current flowing from \\(V_{DD}\\) through \\(R_S\\), \\(M_1\\), and \\(R_D\\) to ground.\n\nThen\n\n\\[\nV_S = V_{DD} - I R_S\n\\]\n\n\\[\nV_{out}=V_D = I R_D\n\\]\n\n\\[\nV_{SG}=V_S - V_{in}\n\\]\n\n\\[\nV_{SD}=V_S - V_D = V_{DD} - I(R_S+R_D)\n\\]\n\nSo the external network gives the load-line relation\n\n\\[\nV_{SD}+I(R_S+R_D)=V_{DD}\n\\]\n\n---\n\n## 2) Region of operation\n\nUsing \\(|V_T|\\) for the pMOS threshold magnitude:\n\n### Cutoff\nIf\n\n\\[\nV_{SG} \\le |V_T|\n\\]\n\nthen \\(M_1\\) is OFF, so\n\n\\[\nI=0,\\qquad V_S=V_{DD},\\qquad V_{out}=0\n\\]\n\nApproximately, cutoff occurs when\n\n\\[\nV_{in} \\gtrsim V_{DD}-|V_T|\n\\]\n\n---\n\n### Saturation\nIf\n\n\\[\nV_{SG}>|V_T|,\\qquad V_{SD}\\ge V_{SG}-|V_T|\n\\]\n\nthen\n\n\\[\nI=\\frac{\\beta_p}{2}(V_{SG}-|V_T|)^2\n\\]\n\nwith\n\n\\[\nV_{SG}=V_{DD}-IR_S-V_{in}\n\\]\n\nSo \\(I\\) is found from\n\n\\[\nI=\\frac{\\beta_p}{2}\\big(V_{DD}-IR_S-V_{in}-|V_T|\\big)^2\n\\]\n\nand then\n\n\\[\nV_{out}=IR_D\n\\]\n\nThe saturation condition simplifies to\n\n\\[\nV_{out}\\le V_{in}+|V_T|\n\\]\n\n---\n\n### Triode\nIf\n\n\\[\nV_{SG}>|V_T|,\\qquad V_{SD}<V_{SG}-|V_T|\n\\]\n\nthen\n\n\\[\nI=\\beta_p\\left[(V_{SG}-|V_T|)V_{SD}-\\frac{V_{SD}^2}{2}\\right]\n\\]\n\n---\n\n## 3) Qualitative behavior\n\n- If \\(V_{in}\\) **increases**, \\(V_{SG}\\) **decreases**\n- So the pMOS conducts **less**\n- Current \\(I\\) decreases\n- Therefore \\(V_{out}=IR_D\\) **decreases**\n\nSo the circuit is **inverting**.\n\nAlso, \\(R_S\\) provides **negative feedback**:\n- stabilizes the bias current\n- improves linearity\n- reduces gain\n\nIf the transistor is strongly ON, the output cannot rise all the way to \\(V_{DD}\\) because of \\(R_S\\). In the extreme ON case, \\(V_{out}\\) is roughly limited to\n\n\\[\nV_{out,\\max}\\lesssim V_{DD}\\frac{R_D}{R_S+R_D}\n\\]\n\n---\n\n## 4) Small-signal gain\n\nBias the transistor in saturation and define\n\n\\[\ng_m=\\frac{2I}{V_{OV}},\\qquad V_{OV}=V_{SG}-|V_T|\n\\]\n\nSince \\(V_{DD}\\) is AC ground, both \\(R_S\\) and \\(R_D\\) go to ground in the small-signal model.\n\n### Ignoring channel-length modulation (\\(r_o\\to\\infty\\))\nThe voltage gain is\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}} \\approx -\\frac{g_m R_D}{1+g_m R_S}\n\\]\n\nSo the effective transconductance is\n\n\\[\ng_{m,\\text{eff}}=\\frac{g_m}{1+g_mR_S}\n\\]\n\nSpecial cases:\n- \\(R_S=0 \\Rightarrow A_v\\approx -g_mR_D\\)\n- \\(g_mR_S\\gg 1 \\Rightarrow A_v\\approx -\\dfrac{R_D}{R_S}\\)\n\n---\n\n### Including \\(r_o\\)\nA more exact midband gain is\n\n\\[\nA_v = -\\frac{g_m R_D r_o}{R_D+R_S+r_o+g_mR_Sr_o}\n\\]\n\n---\n\n## 5) Input and output resistances\n\n- **Input resistance**:\n  \\[\n  R_{in}\\approx \\infty\n  \\]\n  because the MOS gate draws essentially no DC current.\n\n- **Output resistance**:\n  - ignoring \\(r_o\\):  \n    \\[\n    R_{out}\\approx R_D\n    \\]\n  - including \\(r_o\\):\n    \\[\n    R_{out}=R_D\\parallel\\big(r_o+R_S+g_mr_oR_S\\big)\n    \\]\n\n---\n\n## Final interpretation\n\nThis circuit is the **pMOS version of a common-source amplifier with source degeneration**.\n\n- It gives **negative voltage gain**\n- \\(R_S\\) adds **local feedback**\n- For amplification, bias it so that \\(M_1\\) stays in **saturation**\n\nIf you want, I can also draw the **small-signal equivalent circuit** or derive the gain step by step.",
        "format": "markdown",
        "sha256": "da85ab91c548e07656c739529ea70506c7d4bcb4fc972ff28d418c51f2343f5f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain \u0002\u0002",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 18618,
        "total_tokens": 20044,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17440,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 18618,
        "total_tokens": 20044,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17440,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **NMOS enhancement MOSFET** and the output is unloaded, this is a **source follower** (also called a **common-drain** stage).\n\n## 1) Node voltages and current\n- Gate: \\(V_G = V_{in}\\)\n- Drain: \\(V_D = V_{DD}\\)\n- Source: \\(V_S = V_{out}\\)\n\nSince the source is connected to \\(R_S\\),\n\\[\nI_D \\approx I_S = \\frac{V_{out}}{R_S}\n\\]\n\nAlso,\n\\[\nV_{GS} = V_{in} - V_{out}, \\qquad V_{DS} = V_{DD} - V_{out}\n\\]\n\n---\n\n## 2) DC / large-signal behavior\n\n### Cutoff\nIf\n\\[\nV_{in} \\le V_T\n\\]\nthen the MOSFET is off, so\n\\[\nI_D \\approx 0,\\qquad V_{out}=0\n\\]\n\n### Normal ON operation\nFor a source follower, the transistor is usually in **saturation** when it is on.  \nThe saturation condition is\n\n\\[\nV_{DS} \\ge V_{GS}-V_T\n\\]\n\nSubstitute the node voltages:\n\n\\[\nV_{DD}-V_{out} \\ge (V_{in}-V_{out})-V_T\n\\]\n\n\\[\nV_{DD} \\ge V_{in}-V_T\n\\]\n\nSo for the usual case \\(V_{in}\\le V_{DD}\\), \\(M_1\\) stays in saturation.\n\nUsing the square-law saturation model,\n\n\\[\nI_D = \\frac{\\beta}{2}(V_{GS}-V_T)^2\n\\]\n\nwith \\(\\beta=\\mu_n C_{ox}\\frac WL\\), so\n\n\\[\n\\frac{V_{out}}{R_S}\n=\n\\frac{\\beta}{2}(V_{in}-V_{out}-V_T)^2\n\\]\n\nThat is the DC transfer equation.\n\nA useful form is:\n\n\\[\nV_{out} = V_{in} - V_T - V_{OV}\n\\]\n\nwhere \\(V_{OV}=V_{GS}-V_T\\) is the overdrive, and\n\n\\[\nV_{OV}\n=\n\\frac{\\sqrt{1+2\\beta R_S(V_{in}-V_T)}-1}{\\beta R_S}\n\\]\n\nSo the output **follows** the input, but sits below it by about one \\(V_{GS}\\) drop.  \nRoughly:\n\n\\[\nV_{out} \\lesssim V_{in}-V_T\n\\]\n\n---\n\n## 3) Small-signal gain\n\nThis is a **non-inverting** stage.\n\nIgnoring body effect and channel-length modulation,\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m R_S}{1+g_m R_S}\n\\]\n\nSo:\n- \\(A_v < 1\\)\n- if \\(g_mR_S \\gg 1\\), then \\(A_v \\approx 1\\)\n\nIncluding body effect and finite output resistance \\(r_o\\),\n\n\\[\nA_v=\n\\frac{g_m(R_S\\parallel r_o)}\n{1+(g_m+g_{mb})(R_S\\parallel r_o)}\n\\]\n\n---\n\n## 4) Input and output resistances\n\n### Input resistance\nSince the MOS gate draws essentially no DC current,\n\n\\[\nR_{in} \\approx \\infty\n\\]\n\n### Output resistance\nWith the input AC-grounded,\n\n\\[\nR_{out} \\approx \\left(g_m+g_{mb}+g_o+\\frac1{R_S}\\right)^{-1}\n\\]\n\nwhere \\(g_o=1/r_o\\).\n\nSo this stage has **low output resistance**, which is why it is used as a buffer.\n\n---\n\n## 5) Interpretation\n\nThis circuit is a **self-biased source follower**:\n\n- **high input resistance**\n- **low output resistance**\n- **voltage gain slightly less than 1**\n- **no phase inversion**\n\nIt is mainly used as a **buffer** or **level shifter**.\n\n---\n\n## 6) Important practical note\nIf the transistor bulk is tied to ground instead of source, **body effect** increases the threshold as \\(V_{out}\\) rises, so the output sits a bit lower than the simple \\(V_{in}-V_T\\) estimate.\n\n---\n\nIf you want, I can also derive the gain step-by-step using the small-signal model, or plot the \\(V_{out}\\) vs. \\(V_{in}\\) transfer characteristic.",
        "format": "markdown",
        "sha256": "2d917531cf7cdc8ffe99427339769b028a2babdff28f6f30c0362be1701e357e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, with appropriate body-effect and output-resistance refinements.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 16774,
        "total_tokens": 17923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15786,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 16774,
        "total_tokens": 17923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15786,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **nMOS**, this is a **source follower** (also called a **common-drain** stage) with a source resistor \\(R_S\\).\n\n## 1) What the circuit does\n- Input is applied to the **gate**: \\(V_{in}\\)\n- Output is taken from the **source**: \\(V_{out}\\)\n- Drain is tied to \\(V_{DD}\\)\n\nBecause the output is at the source, the source voltage tends to **follow** the gate voltage, but shifted down by the required \\(V_{GS}\\).\n\nSo this stage is mainly a:\n- **voltage buffer**\n- **high-input-resistance** stage\n- **low-output-resistance** stage\n- **non-inverting** stage with gain slightly less than 1\n\n---\n\n## 2) DC analysis\n\nLet\n\n\\[\nV_G = V_{in}, \\qquad V_S = V_{out}, \\qquad V_{GS}=V_{in}-V_{out}\n\\]\n\nSince gate current is essentially zero,\n\n\\[\nI_D \\approx I_S = \\frac{V_{out}}{R_S}\n\\]\n\nIf the MOSFET is on and in saturation,\n\n\\[\nI_D=\\frac{1}{2}\\beta_n (V_{GS}-V_T)^2\n\\]\n\nwhere\n\n\\[\n\\beta_n=\\mu_n C_{ox}\\frac{W}{L}\n\\]\n\nThus,\n\n\\[\n\\frac{V_{out}}{R_S}\n=\n\\frac{1}{2}\\beta_n\\,(V_{in}-V_{out}-V_T)^2\n\\]\n\nThis is the DC transfer relation.\n\n### Cutoff condition\nIf\n\n\\[\nV_{in} \\le V_T\n\\]\n\nthen the transistor is off, so approximately\n\n\\[\nV_{out}\\approx 0\n\\]\n\n### Explicit \\(V_{out}\\) expression\nFor \\(V_{in}>V_T\\), solving the equation gives\n\n\\[\nV_{out}\n=\nV_{in}-V_T\n-\n\\frac{\\sqrt{1+2\\beta_n R_S (V_{in}-V_T)}-1}{\\beta_n R_S}\n\\]\n\nSo \\(V_{out}\\) rises with \\(V_{in}\\), but stays below it.\n\n---\n\n## 3) Region of operation\n\nFor saturation:\n\n\\[\nV_{DS} \\ge V_{GS}-V_T\n\\]\n\nHere,\n\n\\[\nV_{DS}=V_{DD}-V_{out}, \\qquad V_{GS}=V_{in}-V_{out}\n\\]\n\nSo saturation requires\n\n\\[\nV_{DD}-V_{out} \\ge (V_{in}-V_{out})-V_T\n\\]\n\nwhich simplifies to\n\n\\[\nV_{DD} \\ge V_{in}-V_T\n\\]\n\nSo for normal operation with \\(V_{in}\\le V_{DD}\\), the transistor is usually **in saturation whenever it is on**.\n\n---\n\n## 4) Small-signal gain\n\nUsing small-signal analysis and ignoring body effect and channel-length modulation:\n\n\\[\ng_m = \\beta_n(V_{GS}-V_T)\n\\]\n\nand the small-signal voltage gain is\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m R_S}{1+g_m R_S}\n\\]\n\n### Key observations\n- \\(A_v > 0\\): **non-inverting**\n- \\(A_v < 1\\): cannot provide voltage gain greater than 1\n- If \\(g_mR_S \\gg 1\\), then\n  \\[\n  A_v \\approx 1\n  \\]\n  so the source closely follows the gate\n\n---\n\n## 5) Input and output resistance\n\n### Input resistance\nSince the MOS gate draws negligible current,\n\n\\[\nR_{in} \\approx \\infty\n\\]\n\n### Output resistance\nRoughly,\n\n\\[\nR_{out} \\approx \\left(\\frac{1}{g_m}\\right)\\parallel R_S\n\\]\n\nSo the output resistance is much lower than the input resistance, which is why this stage is useful as a **buffer**.\n\n---\n\n## 6) Practical interpretation\n\nThis circuit uses **local negative feedback**:\n\n- If \\(V_{out}\\) rises, then \\(V_{GS}=V_{in}-V_{out}\\) falls\n- That reduces \\(I_D\\)\n- Which opposes the rise in \\(V_{out}\\)\n\nThat feedback makes the stage stable and gives a gain close to 1.\n\n---\n\n## 7) Final summary\n\nThis is a **source follower / common-drain amplifier**.\n\n### DC relation:\n\\[\n\\frac{V_{out}}{R_S}\n=\n\\frac{1}{2}\\beta_n (V_{in}-V_{out}-V_T)^2\n\\]\n\n### Small-signal gain:\n\\[\nA_v=\\frac{g_mR_S}{1+g_mR_S}\\lesssim 1\n\\]\n\n### Properties:\n- very high input resistance\n- low output resistance\n- non-inverting\n- output follows input with a level shift of about \\(V_{GS}\\)\n\nIf you want, I can also include **body effect** and **finite \\(r_o\\)** for a more complete analysis.",
        "format": "markdown",
        "sha256": "9dc5753efcb254a06fc5a50bd9172dfa56d2f714ccaf46673b9e3504d98bce59"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, gmRS/(1 + gmRS), as required for full credit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 14225,
        "total_tokens": 15374,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13100,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 14225,
        "total_tokens": 15374,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13100,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **nMOS enhancement MOSFET**, this is a **source follower** (also called a **common-drain** stage) with a source resistor \\(R_S\\).\n\n## 1) What the circuit does\n- Input is applied to the **gate**: \\(V_{in}\\)\n- Output is taken from the **source**: \\(V_{out}\\)\n- Drain is tied to \\(V_{DD}\\)\n\nBecause the source voltage rises when the gate voltage rises, the transistor provides **local negative feedback**:\n\\[\nV_{GS}=V_{in}-V_{out}\n\\]\nSo the source “follows” the gate, but with a voltage drop.\n\n---\n\n## 2) DC analysis\n\nLet\n- \\(V_S = V_{out}\\)\n- \\(I_D \\approx I_S = \\dfrac{V_{out}}{R_S}\\)\n\nAlso,\n\\[\nV_{GS}=V_{in}-V_{out}, \\qquad V_{DS}=V_{DD}-V_{out}\n\\]\n\n### Cutoff\nIf\n\\[\nV_{in} \\lesssim V_T\n\\]\nthen \\(M_1\\) is off, so\n\\[\nI_D \\approx 0,\\qquad V_{out}\\approx 0\n\\]\n\n### Saturation region\nWhen the transistor is on, it normally operates in saturation, so\n\\[\nI_D=\\frac{1}{2}\\beta_n (V_{GS}-V_T)^2\n\\]\nwhere\n\\[\n\\beta_n=\\mu_n C_{ox}\\frac{W}{L}\n\\]\n\nSubstitute \\(V_{GS}=V_{in}-V_{out}\\):\n\\[\n\\frac{V_{out}}{R_S}\n=\n\\frac{1}{2}\\beta_n\\left(V_{in}-V_{out}-V_T\\right)^2\n\\]\n\nThis is the DC transfer equation.\n\n### Exact first-order solution\nFor \\(V_{in}>V_T\\),\n\\[\nV_{out}\n=\n\\frac{1+\\beta_n R_S(V_{in}-V_T)-\\sqrt{1+2\\beta_n R_S(V_{in}-V_T)}}{\\beta_n R_S}\n\\]\n\nA useful approximation is:\n\\[\nV_{out}\\approx V_{in}-V_{GS}\n\\]\nand since \\(V_{GS}=V_T+V_{OV}\\),\n\\[\nV_{out}\\approx V_{in}-V_T-V_{OV}\n\\]\n\nSo this is **not exactly** \\(V_{in}-V_T\\), but roughly that when the overdrive \\(V_{OV}\\) is small.\n\n---\n\n## 3) Region of operation\n\nFor saturation:\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\]\n\nSubstitute:\n\\[\nV_{DD}-V_{out}\\ge (V_{in}-V_{out})-V_T\n\\]\nwhich simplifies to\n\\[\nV_{DD}\\ge V_{in}-V_T\n\\]\n\nSo if \\(V_{in}\\le V_{DD}\\), the MOSFET is usually **in saturation whenever it is on**.\n\n---\n\n## 4) Small-signal gain\n\nThis is the key result for amplifier behavior.\n\nSince \\(V_{DD}\\) is AC ground, the stage is a source follower.\n\n### Ignoring body effect and channel-length modulation\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx\n\\frac{g_m R_S}{1+g_m R_S}\n\\]\n\nSo:\n- \\(A_v > 0\\) → **non-inverting**\n- \\(A_v < 1\\) → gain is **less than unity**\n- If \\(g_m R_S \\gg 1\\), then\n\\[\nA_v \\approx 1\n\\]\n\n### More complete expression\nIf you include body effect and finite \\(r_o\\):\n\\[\nA_v=\n\\frac{g_m(R_S\\parallel r_o)}\n{1+(g_m+g_{mb})(R_S\\parallel r_o)}\n\\]\n\n---\n\n## 5) Input and output resistance\n\n### Input resistance\nThe MOS gate draws essentially no DC current, so\n\\[\nR_{in}\\approx \\infty\n\\]\n\n### Output resistance\nLooking into the source:\n\\[\nR_{out}\\approx\n\\left(g_m+g_{mb}+\\frac{1}{r_o}+\\frac{1}{R_S}\\right)^{-1}\n\\]\n\nIf \\(r_o\\) is large and body effect is ignored:\n\\[\nR_{out}\\approx \\left(g_m+\\frac{1}{R_S}\\right)^{-1}\n\\]\nand often roughly\n\\[\nR_{out}\\sim \\frac{1}{g_m}\n\\]\n\nSo this stage has **low output resistance**, which is why it works well as a buffer.\n\n---\n\n## 6) Main conclusions\n\nThis circuit is a:\n\n- **Common-drain / source-follower amplifier**\n- **Voltage buffer**\n- **Non-inverting**\n- **High input resistance**\n- **Low output resistance**\n- **Voltage gain slightly less than 1**\n\n### DC behavior\n\\[\nV_{out}\n\\text{ rises with }V_{in},\\quad\nV_{out}\\approx V_{in}-V_{GS}\n\\]\n\n### Small-signal behavior\n\\[\nA_v \\approx \\frac{g_mR_S}{1+g_mR_S}<1\n\\]\n\n### Limitation\nIf \\(V_{in}\\) is limited to \\(V_{DD}\\), then the output cannot rise all the way to \\(V_{DD}\\); it is limited to roughly\n\\[\nV_{out,\\max}\\approx V_{DD}-V_{GS}\n\\]\n\n---\n\nIf you want, I can also give:\n1. the **small-signal equivalent circuit**, or  \n2. a **step-by-step derivation** of the gain formula.",
        "format": "markdown",
        "sha256": "75dca67110d57536ef44127eee3b1b8b8f15a8216f5d7d17c6727a5fe9303854"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, gm·RS/(1 + gm·RS). The additional output-resistance and body-effect details are consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 13361,
        "total_tokens": 14510,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12103,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 13361,
        "total_tokens": 14510,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12103,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **nMOS**, this is a **common-gate stage**:\n\n- **Gate**: tied to \\(V_{DD}\\) \\(\\Rightarrow\\) AC ground\n- **Input**: applied at the **source** \\((V_{in})\\)\n- **Output**: taken at the **drain** \\((V_{out})\\)\n- **Load**: \\(R_D\\)\n\n## 1) DC / large-signal behavior\n\nLet\n\n\\[\nV_G=V_{DD},\\qquad V_S=V_{in},\\qquad V_D=V_{out}\n\\]\n\nThen\n\n\\[\nV_{GS}=V_{DD}-V_{in}\n\\]\n\nSo the transistor is ON only if\n\n\\[\nV_{GS}>V_T \\;\\;\\Rightarrow\\;\\; V_{in}<V_{DD}-V_T\n\\]\n\nand\n\n\\[\nV_{out}=V_{DD}-I_D R_D\n\\]\n\n### If \\(M_1\\) is in saturation\n(ignoring channel-length modulation)\n\n\\[\nI_D=\\frac{k_n}{2}(V_{DD}-V_{in}-V_T)^2\n\\]\n\nhence\n\n\\[\nV_{out}=V_{DD}-\\frac{k_n R_D}{2}(V_{DD}-V_{in}-V_T)^2\n\\]\n\nSo as \\(V_{in}\\) increases:\n\n- \\(V_{GS}\\) decreases\n- \\(I_D\\) decreases\n- voltage drop across \\(R_D\\) decreases\n- therefore \\(V_{out}\\) **increases**\n\nSo this stage is **non-inverting**.\n\n### Cutoff\nIf\n\n\\[\nV_{in}\\ge V_{DD}-V_T\n\\]\n\nthen \\(M_1\\) turns OFF and\n\n\\[\nV_{out}\\approx V_{DD}\n\\]\n\n### Saturation condition\nFor an nMOS,\n\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\]\n\nwhich here becomes\n\n\\[\nV_{out}-V_{in}\\ge V_{DD}-V_{in}-V_T\n\\;\\Rightarrow\\;\nV_{out}\\ge V_{DD}-V_T\n\\]\n\nSo to stay in saturation, the drain must remain quite close to \\(V_{DD}\\).  \nIf \\(V_{out}\\) drops below that, \\(M_1\\) enters the **triode** region.\n\n---\n\n## 2) Small-signal analysis\n\nTreat \\(V_{DD}\\) as AC ground.\n\n### Voltage gain\nNeglecting \\(r_o\\),\n\n\\[\ni_d = g_m v_{gs} = g_m(0-v_{in})=-g_m v_{in}\n\\]\n\nand since\n\n\\[\nv_{out}=-i_d R_D\n\\]\n\nwe get\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\\approx +g_m R_D\n\\]\n\nSo the gain is **positive**.\n\nIncluding transistor output resistance,\n\n\\[\nA_v \\approx +g_m(R_D\\parallel r_o)\n\\]\n\n(and if body effect matters, replace \\(g_m\\) by \\(g_m+g_{mb}\\)).\n\n---\n\n## 3) Input and output resistances\n\n### Input resistance\nA common-gate stage has **low input resistance**:\n\n\\[\nR_{in}\\approx \\frac{1}{g_m}\n\\]\n\n(or \\(\\approx 1/(g_m+g_{mb})\\) with body effect).\n\n### Output resistance\nLooking into the drain:\n\n\\[\nR_{out}\\approx R_D\\parallel r_o\n\\]\n\n---\n\n## 4) Key conclusions\n\nThis circuit is a **common-gate amplifier** with:\n\n- **positive voltage gain**\n- **low input resistance**\n- **moderate output resistance**\n- good current-buffer / wideband behavior\n\n### Main formulas\n\\[\nA_v \\approx +g_m R_D\n\\]\n\\[\nR_{in}\\approx \\frac{1}{g_m}\n\\]\n\\[\nR_{out}\\approx R_D\\parallel r_o\n\\]\n\n### Qualitative behavior\n- increase \\(V_{in}\\) \\(\\Rightarrow\\) decrease \\(I_D\\)\n- decrease drop across \\(R_D\\)\n- increase \\(V_{out}\\)\n\nSo \\(V_{out}\\) moves in the **same direction** as \\(V_{in}\\).\n\nIf you want, I can also give:\n1. the **full piecewise transfer characteristic** (\\(V_{out}\\) vs. \\(V_{in}\\)), or  \n2. the **small-signal derivation step by step**.",
        "format": "markdown",
        "sha256": "9cbb241c10bc9870f498c902b51f4c5b861e3d43a5bc69e641225a995a5ae3a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and gives the correct non-inverting gain and low input resistance, including the effect of output resistance. The additional DC analysis is consistent with the stated nMOS assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 20150,
        "total_tokens": 21266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 20150,
        "total_tokens": 21266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **NMOS**, this is a **common-gate stage**:\n\n- **gate** tied to \\(V_{DD}\\)  \\(\\Rightarrow\\) AC-grounded\n- **input** applied at the **source**\n- **output** taken at the **drain**\n- \\(R_D\\) is the drain load\n\nSo the stage is **non-inverting**.\n\n---\n\n## 1) DC / large-signal relations\n\nLet\n\n\\[\nV_G=V_{DD}, \\qquad V_S=V_{in}, \\qquad V_D=V_{out}\n\\]\n\nThen\n\n\\[\nV_{GS}=V_{DD}-V_{in}\n\\]\n\\[\nV_{DS}=V_{out}-V_{in}\n\\]\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}\n\\]\n\n### Cutoff\nIf\n\n\\[\nV_{GS}\\le V_T \\;\\Rightarrow\\; V_{in}\\ge V_{DD}-V_T\n\\]\n\nthen the MOSFET is off:\n\n\\[\nI_D \\approx 0,\\qquad V_{out}\\approx V_{DD}\n\\]\n\n---\n\n### Saturation\nIf\n\n\\[\nV_{GS}>V_T\n\\quad\\text{and}\\quad\nV_{DS}\\ge V_{GS}-V_T\n\\]\n\nthen, using the square-law model,\n\n\\[\nI_D=\\frac{k_n}{2}(V_{GS}-V_T)^2\n=\\frac{k_n}{2}(V_{DD}-V_{in}-V_T)^2\n\\]\n\nSo\n\n\\[\nV_{out}\n=\nV_{DD}-R_D I_D\n=\nV_{DD}-\\frac{k_n R_D}{2}(V_{DD}-V_{in}-V_T)^2\n\\]\n\nwith the saturation condition becoming\n\n\\[\nV_{out}\\ge V_{DD}-V_T\n\\]\n\nSo in this circuit, saturation exists only when \\(V_{out}\\) stays quite close to \\(V_{DD}\\).\n\n---\n\n### Triode region\nIf \\(M_1\\) is on but \\(V_{out}<V_{DD}-V_T\\), then it is in triode:\n\n\\[\nI_D\n=\nk_n\\!\\left[(V_{GS}-V_T)V_{DS}-\\frac{V_{DS}^2}{2}\\right]\n\\]\n\ni.e.\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\nk_n\\!\\left[(V_{DD}-V_{in}-V_T)(V_{out}-V_{in})\n-\\frac{(V_{out}-V_{in})^2}{2}\\right]\n\\]\n\n---\n\n## 2) Small-signal behavior\n\nAround a bias point where \\(M_1\\) is in saturation, this is a **common-gate amplifier**.\n\nSince the gate is AC-grounded,\n\n\\[\nv_{gs}=-v_{in}\n\\]\n\nand\n\n\\[\ni_d=g_m v_{gs}=-g_m v_{in}\n\\]\n\nThe drain resistor converts that current change into an output voltage change:\n\n\\[\nv_o \\approx -i_d(R_D\\parallel r_o)\n\\]\n\nSo\n\n\\[\nA_v \\equiv \\frac{v_o}{v_{in}}\n\\approx +g_m(R_D\\parallel r_o)\n\\]\n\nIf \\(r_o\\gg R_D\\),\n\n\\[\nA_v \\approx +g_m R_D\n\\]\n\nSo the gain is **positive**.\n\n---\n\n## 3) Input and output resistances\n\nFor the common-gate stage:\n\n- **input resistance** is low:\n\n\\[\nR_{in}\\approx \\frac{1}{g_m}\n\\]\n\n(more exactly, with \\(r_o\\): \\(\\displaystyle R_{in}=\\frac{R_D+r_o}{1+g_m r_o}\\))\n\n- **output resistance** is approximately\n\n\\[\nR_{out}\\approx R_D\\parallel r_o\n\\]\n\n---\n\n## 4) Interpretation\n\nAs \\(V_{in}\\) increases:\n\n- \\(V_{GS}=V_{DD}-V_{in}\\) decreases\n- \\(I_D\\) decreases\n- voltage drop across \\(R_D\\) decreases\n- \\(V_{out}\\) rises\n\nSo the circuit is a **non-inverting, source-driven NMOS amplifier**.\n\n---\n\n## 5) Important practical note\n\nBecause the gate is tied directly to \\(V_{DD}\\), the saturation condition is restrictive:\n\n\\[\nV_{out}\\ge V_{DD}-V_T\n\\]\n\nThat means the drain can only drop by about \\(V_T\\) before the transistor leaves saturation. So if the circuit is intended as a linear amplifier, the usable swing is limited unless the input is biased appropriately.\n\n---\n\nIf you want, I can also draw the **small-signal equivalent circuit** and derive \\(A_v\\), \\(R_{in}\\), and \\(R_{out}\\) step by step.",
        "format": "markdown",
        "sha256": "3d35c0aceb9911d2dae2556d60df75659e2b6bdefae91630c949b13d30c0e711"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and gives the non-inverting gain and low input resistance, including appropriate output-resistance effects. The additional DC-region analysis is consistent with the stated NMOS assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 16184,
        "total_tokens": 17300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15121,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 16184,
        "total_tokens": 17300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15121,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **nMOS**, this is a **common-gate** stage with a resistive load \\(R_D\\).\n\n## 1) Basic node relations\nGate is fixed at\n\\[\nV_G = V_{DD}\n\\]\nSource is the input:\n\\[\nV_S = V_{in}\n\\]\nDrain is the output:\n\\[\nV_D = V_{out}\n\\]\n\nSo\n\\[\nV_{GS} = V_{DD}-V_{in}, \\qquad\nV_{DS} = V_{out}-V_{in}\n\\]\n\nThe resistor current equals the MOSFET drain current:\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}\n\\]\n\n---\n\n## 2) Large-signal/DC behavior\n\nFor each \\(V_{in}\\), the operating point is set by the MOSFET equation together with\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}\n\\]\n\n### Cutoff\nIf\n\\[\nV_{GS}<V_T \\;\\;\\Rightarrow\\;\\; V_{in}>V_{DD}-V_T\n\\]\nthen the transistor is OFF:\n\\[\nI_D=0,\\qquad V_{out}=V_{DD}\n\\]\n\n### Saturation\nIf the device is ON and in saturation:\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\]\nthen, ignoring channel-length modulation,\n\\[\nI_D=\\frac{k_n}{2}(V_{GS}-V_T)^2\n=\\frac{k_n}{2}(V_{DD}-V_{in}-V_T)^2\n\\]\nand therefore\n\\[\nV_{out}=V_{DD}-R_D\\frac{k_n}{2}(V_{DD}-V_{in}-V_T)^2\n\\]\n\nSince\n\\[\n\\frac{dV_{out}}{dV_{in}}=k_nR_D(V_{DD}-V_{in}-V_T)=g_mR_D>0\n\\]\nthe gain is **positive**.\n\n### Triode region\nIf the device is ON but\n\\[\nV_{DS}<V_{GS}-V_T\n\\]\nthen\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\nk_n\\!\\left[(V_{DD}-V_{in}-V_T)(V_{out}-V_{in})-\\frac{(V_{out}-V_{in})^2}{2}\\right]\n\\]\n\n---\n\n## 3) Qualitative operation\n- If \\(V_{in}\\) **increases**, then \\(V_{GS}\\) **decreases**\n- So \\(I_D\\) **decreases**\n- The drop across \\(R_D\\) decreases\n- Therefore \\(V_{out}\\) **increases**\n\nSo this is a **non-inverting** stage.\n\n---\n\n## 4) Small-signal analysis\nAbout a bias point where \\(M_1\\) is in saturation, \\(V_{DD}\\) is AC ground, so the gate is AC-grounded.\n\n### Voltage gain\nIgnoring body effect and taking \\(r_o\\to\\infty\\),\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\\approx +g_mR_D\n\\]\n\nMore generally,\n\\[\nA_v \\approx +(g_m+g_{mb})(R_D\\parallel r_o)\n\\]\n\n### Input resistance\nA common-gate stage has low input resistance:\n\\[\nR_{in}\\approx \\frac{1}{g_m}\n\\]\nor more accurately\n\\[\nR_{in}\\approx \\frac{1}{g_m+g_{mb}}\n\\]\n\n### Output resistance\n\\[\nR_{out}\\approx R_D\\parallel r_o\n\\]\n\n---\n\n## 5) Important practical note\nBecause the gate is tied directly to \\(V_{DD}\\), saturation requires\n\\[\nV_{out}\\ge V_{DD}-V_T\n\\]\nSo for large current, the transistor can easily move into triode.  \nThat means this is only a good **common-gate amplifier** if it is biased carefully.\n\n---\n\n## Final summary\nThis circuit is a **common-gate NMOS amplifier** with:\n- **input at the source**\n- **output at the drain**\n- **positive voltage gain**\n- **low input resistance**\n- **output pulled up by \\(R_D\\)**\n\nIf you want, I can also draw the small-signal equivalent and derive \\(A_v\\) step by step.",
        "format": "markdown",
        "sha256": "780570e3e4fd623c377f02a4af4a4404613e6fdf3d1c92bd49c27ae7bcbf93f4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input common-gate topology, the AC-grounded gate, positive gain, and low input resistance, with the expected approximate gain and output resistance. The additional large-signal discussion is consistent with the stated NMOS assumptions; its small-signal formulas are appropriately approximate.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 21198,
        "total_tokens": 22314,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20241,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 21198,
        "total_tokens": 22314,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20241,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "There is an important issue here:\n\n## 1) **As drawn, the circuit does not amplify \\(V_{in}\\)**\n\nThe lower terminal of \\(M_1\\) is **directly grounded**.  \nBut \\(V_{in}\\) is coupled through \\(C_1\\) to that same grounded node.\n\nSo the node on the right side of \\(C_1\\) is fixed at 0 V, which means:\n\n- the input source just drives a **capacitor to ground**\n- the transistor source voltage does **not** change\n- therefore \\(v_{gs}\\) stays constant\n- hence the drain current stays constant\n- so \\(v_{out}\\) does not respond to \\(v_{in}\\)\n\n### Small-signal result, literally from the drawing:\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=0\n\\]\n\n### What the input source sees:\n\\[\nZ_{in}=\\frac{1}{sC_1}\n\\]\n\n### DC operating point\nSince \\(C_1\\) blocks DC, the MOSFET bias is set only by \\(V_b\\), \\(R_D\\), and \\(V_{DD}\\):\n\n- \\(V_S=0\\)\n- \\(V_G=V_b\\)\n- \\(V_{GS}=V_b\\)\n\nIf \\(M_1\\) is in saturation,\n\\[\nI_D \\approx \\frac{1}{2}k_n(V_b-V_T)^2\n\\]\nand\n\\[\nV_{out,DC}=V_{DD}-I_D R_D\n\\]\n\nSo, **strictly speaking, the signal path from \\(V_{in}\\) to \\(V_{out}\\) is zero**.\n\n---\n\n## 2) What the circuit is **probably intended** to be\n\nThis looks like the standard **common-gate NMOS amplifier**:\n\n- gate biased at \\(V_b\\)\n- input applied to the **source** through \\(C_1\\)\n- output taken at the **drain**\n- \\(R_D\\) is the drain load\n\nIf that is the intended circuit, then the source should **not** be hard-grounded for AC.\n\n---\n\n# Intended common-gate analysis\n\n## Topology\nThis is a **common-gate amplifier**.\n\n- **Input:** source\n- **Output:** drain\n- **Common terminal:** gate, held at AC ground by the bias \\(V_b\\)\n\nIt is a **non-inverting** stage.\n\n---\n\n## DC bias\nIgnoring the input capacitor for DC:\n\n\\[\nV_{GSQ}=V_b - V_{SQ}\n\\]\n\nIf \\(V_S \\approx 0\\), then:\n\\[\nV_{GSQ}\\approx V_b\n\\]\n\nAssuming saturation:\n\\[\nI_D \\approx \\frac{1}{2}k_n(V_b-V_T)^2\n\\]\n\nand the quiescent output is:\n\\[\nV_{OQ}=V_{DD}-I_D R_D\n\\]\n\nFor saturation:\n\\[\nV_{DSQ} \\ge V_{GSQ}-V_T\n\\]\n\nIf \\(V_S=0\\), this becomes:\n\\[\nV_{OQ} \\ge V_b - V_T\n\\]\n\n---\n\n## Midband small-signal gain\n\nAt midband:\n\n- \\(V_{DD}\\) is AC ground\n- \\(V_b\\) is AC ground\n- \\(C_1\\) is approximately a short\n\nSo the source sees the input signal directly.\n\n### Approximate gain\nIgnoring body effect and channel-length modulation:\n\\[\nA_v \\approx +g_m R_D\n\\]\n\nIf finite \\(r_o\\) is included:\n\\[\nA_v \\approx +g_m(R_D \\parallel r_o)\n\\]\n\n### More exact form\nWith \\(g_o=1/r_o\\), and including body effect \\(g_{mb}\\):\n\\[\nA_v=\\frac{v_o}{v_s}\n=\\frac{g_m+g_{mb}+g_o}{g_o+1/R_D}\n\\]\n\nUsually this reduces to:\n\\[\nA_v \\approx (g_m+g_{mb})(R_D\\parallel r_o)\n\\]\nand if body effect is neglected:\n\\[\nA_v \\approx g_m(R_D\\parallel r_o)\n\\]\n\n---\n\n## Why the gain is positive\nIf the source voltage rises slightly while the gate stays fixed:\n\n- \\(v_{gs}\\) decreases\n- \\(I_D\\) decreases\n- voltage drop across \\(R_D\\) decreases\n- drain voltage rises\n\nSo:\n\\[\nv_{in}\\uparrow \\Rightarrow v_{out}\\uparrow\n\\]\n\nHence **no phase inversion**.\n\n---\n\n## Input resistance\nA common-gate stage has **low input resistance**.\n\nApproximate:\n\\[\nR_{in}\\approx \\frac{1}{g_m}\n\\]\n\nIncluding body effect:\n\\[\nR_{in}\\approx \\frac{1}{g_m+g_{mb}}\n\\]\n\nIncluding \\(r_o\\) more exactly:\n\\[\nR_{in}=\\frac{1+g_oR_D}{g_m+g_{mb}+g_o}\n\\]\n\nSo this stage is useful when driven by a **low-impedance source**.\n\n---\n\n## Output resistance\nWith the input source set to AC ground:\n\\[\nR_{out}\\approx R_D \\parallel r_o\n\\]\n\n---\n\n## Effect of \\(C_1\\)\n\\(C_1\\) is an **input coupling capacitor**:\n\n- blocks DC from the signal source\n- passes AC to the source node\n\nIt creates a **high-pass** response with the resistance seen at the source node.\n\nIf the source resistance is \\(R_{sig}\\):\n\\[\nf_L \\approx \\frac{1}{2\\pi C_1(R_{sig}+R_{in})}\n\\]\n\nIf the source is ideal \\((R_{sig}=0)\\):\n\\[\nf_L \\approx \\frac{1}{2\\pi C_1 R_{in}}\n\\]\n\n---\n\n# Final conclusion\n\n## If analyzed **exactly as drawn**\n\\[\n\\boxed{\\frac{v_{out}}{v_{in}}=0}\n\\]\nbecause the MOSFET source is hard-grounded, so the input signal is shunted to ground through \\(C_1\\).\n\n## If the **intended** circuit is a common-gate amplifier\nthen:\n\n- it is a **common-gate NMOS stage**\n- voltage gain is approximately\n  \\[\n  \\boxed{A_v \\approx +g_m(R_D\\parallel r_o)\\approx +g_mR_D}\n  \\]\n- input resistance is low:\n  \\[\n  \\boxed{R_{in}\\approx 1/g_m}\n  \\]\n- output resistance is\n  \\[\n  \\boxed{R_{out}\\approx R_D\\parallel r_o}\n  \\]\n\nIf you want, I can also draw the **small-signal equivalent** and derive the gain step by step.",
        "format": "markdown",
        "sha256": "e52c0f72efff9513723f17c4bf485d3947150768ee3ce112d9f4366fa50b3d7d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It explicitly notices that the source node is hard-shorted to ground and correctly concludes that the input produces ideally zero gain. The separate intended common-gate analysis is clearly labeled as hypothetical and does not undermine the conclusion for the circuit as drawn.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 14417,
        "total_tokens": 16154,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 14417,
        "total_tokens": 16154,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **NMOS**, this is **intended** to be a **common-gate amplifier**:\n\n- gate fixed at \\(V_b\\)\n- input applied to the **source** through \\(C_1\\)\n- output taken at the **drain**\n- \\(R_D\\) is the drain load to \\(V_{DD}\\)\n\nBut there is one important issue:\n\n## 1) As literally drawn, the input is shorted\nThe source node of \\(M_1\\) is shown **directly connected to ground**.  \nSo the signal through \\(C_1\\) is being applied to a node that is already at ground.\n\nTherefore, **as drawn**:\n\n\\[\nv_{out(ac)} = 0\n\\]\n\ni.e. there is **no AC gain from \\(V_{in}\\) to \\(V_{out}\\)**.\n\nSo the only meaningful behavior of the shown circuit is its **DC bias**.\n\n---\n\n## 2) DC analysis of the circuit as drawn\nSince \\(C_1\\) blocks DC:\n\n- source is at \\(0\\text{ V}\\)\n- gate is at \\(V_b\\)\n- drain is at \\(V_{out}\\)\n\nSo:\n\n\\[\nV_{GS} = V_b,\\qquad V_D = V_{out}=V_{DD}-I_D R_D\n\\]\n\n### If \\(V_b \\le V_T\\)\nThe NMOS is off:\n\n\\[\nI_D \\approx 0,\\qquad V_{out}\\approx V_{DD}\n\\]\n\n### If \\(V_b > V_T\\) and \\(M_1\\) is in saturation\n\\[\nI_D \\approx \\frac{1}{2}k_n (V_b-V_T)^2\n\\]\n\nand\n\n\\[\nV_{out}=V_{DD}-R_D I_D\n\\]\n\nwith saturation condition\n\n\\[\nV_{out} \\ge V_b - V_T\n\\]\n\n---\n\n## 3) If the intended circuit is the standard common-gate stage\nUsually that source node is **not hard-grounded**; it is biased by a current source or resistor, and \\(C_1\\) injects the AC signal there.\n\nThen the circuit is a **common-gate amplifier**.\n\n### Midband small-signal results\nAt AC:\n\n- \\(V_b\\) is AC ground\n- \\(V_{DD}\\) is AC ground\n- \\(C_1\\) is a short\n\nSo the voltage gain is approximately\n\n\\[\nA_v \\equiv \\frac{v_o}{v_i} \\approx +g_m(R_D \\parallel r_o)\n\\]\n\nIf body effect is included:\n\n\\[\nA_v \\approx +(g_m+g_{mb})(R_D \\parallel r_o)\n\\]\n\nIf \\(r_o\\) is ignored:\n\n\\[\nA_v \\approx +g_m R_D\n\\]\n\n### Sign of gain\nIt is **non-inverting**:\n\n- \\(v_{in}\\uparrow \\Rightarrow v_s\\uparrow\\)\n- \\(v_{gs}\\downarrow\\)\n- \\(i_D\\downarrow\\)\n- drop across \\(R_D\\downarrow\\)\n- \\(v_{out}\\uparrow\\)\n\nSo output rises when input rises.\n\n---\n\n## 4) Input and output resistances of the intended common-gate stage\n\n\\[\nR_{in} \\approx \\frac{1}{g_m}\n\\]\n\n(or more accurately \\(1/(g_m+g_{mb})\\))\n\n\\[\nR_{out} \\approx R_D \\parallel r_o\n\\]\n\nSo this stage has:\n\n- **low input resistance**\n- **moderate/high output resistance**\n- **positive voltage gain**\n\n---\n\n## 5) Role of \\(C_1\\)\n\\(C_1\\) is a **coupling capacitor**:\n\n- blocks DC from the source \\(V_{in}\\)\n- lets AC pass to the transistor source node\n\nFor the intended circuit, it creates a low-frequency pole with the source resistance and \\(R_{in}\\).\n\n---\n\n## Final conclusion\n- **As drawn literally:** the AC input is shorted to ground, so **no signal amplification occurs**.\n- **As intended:** this is a **common-gate NMOS amplifier** with approximate gain\n\n\\[\nA_v \\approx +g_m(R_D \\parallel r_o)\n\\]\n\nand\n\n\\[\nR_{in}\\approx \\frac{1}{g_m},\\qquad R_{out}\\approx R_D\\parallel r_o\n\\]\n\nIf you want, I can also draw the **small-signal equivalent circuit** and derive the gain step by step.",
        "format": "markdown",
        "sha256": "3c59da7bda059e189404232c5ac8fd7c4f803f20b48a2f3b26a17a7a6d06cde6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source is hard-shorted to ground and concludes that the drawn circuit has ideally zero gain from Vin. The additional common-gate analysis is explicitly limited to a hypothetical corrected circuit.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 20984,
        "total_tokens": 22721,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 20984,
        "total_tokens": 22721,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "There is an important issue with this schematic:\n\n## 1) As drawn, it does **not work as an amplifier**\nThe node connected to \\(C_1\\) is also directly tied to ground. So the input signal \\(V_{in}\\) is being capacitively coupled into a node that is already clamped at 0 V.\n\n### Consequence\nFor small-signal AC:\n\n- source of \\(M_1\\) is at AC ground\n- gate is also at AC ground (since \\(V_b\\) is a DC bias source)\n- therefore  \n  \\[\n  v_{gs}=0\n  \\]\n- so the transistor current does not change:\n  \\[\n  i_d = g_m v_{gs} = 0\n  \\]\n- hence the output does not vary:\n  \\[\n  v_{out}=0 \\quad \\text{(small-signal)}\n  \\]\n\nSo the voltage gain is\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=0\n\\]\n\nIgnoring parasitic capacitances, the input source simply sees the capacitor \\(C_1\\) to ground:\n\n\\[\nZ_{in,\\text{seen by }V_{in}}=\\frac{1}{sC_1}\n\\]\n\n---\n\n## 2) DC bias analysis of the circuit as drawn\nAt DC, \\(C_1\\) is open, so \\(V_{in}\\) has no effect.\n\nThe MOSFET bias is set by:\n\n- source: \\(V_S=0\\)\n- gate: \\(V_G=V_b\\)\n- drain: \\(V_D=V_{out}\\)\n\nThus,\n\n\\[\nV_{GS}=V_b\n\\]\n\nand the drain current is determined by the MOSFET equation plus the load line:\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}\n\\]\n\nIf \\(V_b \\le V_T\\), the transistor is off:\n\n\\[\nI_D \\approx 0,\\qquad V_{out}\\approx V_{DD}\n\\]\n\nIf \\(V_b>V_T\\) and the device is in saturation, then approximately\n\n\\[\nI_D \\approx \\frac{1}{2}k_n(V_b-V_T)^2\n\\]\n\nso\n\n\\[\nV_{out} = V_{DD} - I_D R_D\n\\]\n\nwith saturation condition\n\n\\[\nV_{out} \\ge V_b - V_T\n\\]\n\n---\n\n## 3) What the circuit was probably intended to be\nThis looks like an intended **common-gate NMOS amplifier**:\n\n- gate biased at \\(V_b\\)\n- input applied to the source through \\(C_1\\)\n- output taken at the drain through \\(R_D\\)\n\nBut for that to work, the source must **not** be hard-grounded. Usually it is biased with a current source or some other high-impedance bias network.\n\nIf corrected to a proper common-gate stage, then the midband gain would be approximately\n\n\\[\nA_v \\approx +g_m(R_D \\parallel r_o)\n\\]\n\n(non-inverting), with\n\n\\[\nR_{in}\\approx \\frac{1}{g_m}\n\\]\n\nand\n\n\\[\nR_{out}\\approx R_D \\parallel r_o\n\\]\n\nThe capacitor \\(C_1\\) would then create the input high-pass behavior.\n\n---\n\n## Final conclusion\n- **Literal circuit as drawn:** no signal gain, \\(A_v=0\\)\n- **DC output:** set only by \\(V_b\\), \\(R_D\\), and \\(V_{DD}\\)\n- **Likely intended circuit:** a common-gate amplifier, but the source should not be directly grounded\n\nIf you want, I can also show the **corrected common-gate small-signal analysis step by step**.",
        "format": "markdown",
        "sha256": "09ab63e2532d492d457bb4dc84e5162dc5043df56fa584456fc669e5cbe12f15"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It notices that the input/source node is hard-shorted to ground and correctly concludes the ideal small-signal gain is zero. The additional DC-bias and intended-topology discussion is consistent and does not undermine the essential answer.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 15310,
        "total_tokens": 17047,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 15310,
        "total_tokens": 17047,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\nWhy:\n- The only **independent high-impedance nodes** are the **gate** and **drain**.\n- \\(C_{GS}\\) is from gate to ground.\n- \\(C_{DB}\\) is from drain to ground.\n- \\(C_{GD}\\) connects those two nodes, but does **not** create a third independent state.\n- \\(C_{SB}\\) does not add a pole here because the **source is at AC ground**.\n\nSo the small-signal transfer function is **second order** → **2 poles**.\n\nNote: \\(C_{GD}\\) can also introduce a **zero** (often a RHP zero), but the number of **poles** is still **2**.",
        "format": "markdown",
        "sha256": "156f127cbd4dfeac7c60306768cf85a2f590ae82252d681907b77b0e7a7f2a6b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count using the capacitor connections: CGD does not add an independent state, and CSB is inactive with the source at AC ground.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 4776,
        "total_tokens": 6748,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4611,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 4776,
        "total_tokens": 6748,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4611,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\nWhy:\n- The only **independent dynamic nodes** are the **gate** and **drain**.\n- \\(C_{GS}\\) is from gate to AC ground.\n- \\(C_{DB}\\) is from drain to AC ground.\n- \\(C_{GD}\\) couples those two nodes, but it does **not** create an extra independent pole by itself.\n- \\(C_{SB}\\) does **not** add a pole here because the **source is grounded**, so that capacitor is effectively from ground to ground in the small-signal view.\n\nSo the transfer function is generally **second order**: **2 poles**.  \n(And because of \\(C_{GD}\\), the circuit can also have a **zero**.)",
        "format": "markdown",
        "sha256": "7bf9001e473f88dc42f48b7f63c7612f785664a2916e40b555c106ec6c66943a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and accounts for the capacitors: CSB is shorted by the grounded source, while CGS, CGD, and CDB provide only two independent dynamic states. It also correctly notes that CGD can introduce a zero.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 2270,
        "total_tokens": 4242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2105,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 2270,
        "total_tokens": 4242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2105,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**2 poles.**\n\nReason: in small-signal AC analysis, \\(V_{DD}\\) is ground, and the **source is grounded** as drawn. So the only independent dynamic nodes are:\n\n- **Gate node**\n- **Drain/output node**\n\nThe capacitors relate to these nodes as:\n\n- \\(C_{GS}\\): gate to ground\n- \\(C_{DB}\\): drain to ground\n- \\(C_{GD}\\): between gate and drain\n- \\(C_{SB}\\): source to bulk, but source/bulk are grounded here, so it does **not** add an independent pole\n\nSo the circuit has **two independent energy-storage variables**, hence a **second-order transfer function**:\n\n\\[\n\\boxed{2 \\text{ poles}}\n\\]\n\n(And \\(C_{GD}\\) can also introduce a zero.)",
        "format": "markdown",
        "sha256": "f539b01f0c540bbc6e31deb526d6a5e7ed13bf11c116df0d05cb2d526bbb2b8f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and accounts for the capacitors: CSB is shorted because source and bulk are grounded, leaving two independent capacitor-storage variables.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 3641,
        "total_tokens": 5613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3463,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 3641,
        "total_tokens": 5613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3463,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an nMOS and the gate current is negligible.\n\n### 1) What the circuit is\nThis is a **source-driven MOS stage with resistive negative feedback** from output to gate.\n\nThe divider gives a feedback voltage\n\n\\[\nV_F=\\beta V_{out}, \\qquad \\beta=\\frac{R_2}{R_1+R_2}\n\\]\n\nSo the transistor sees\n\n\\[\nV_{GS}=V_F-V_{in}=\\beta V_{out}-V_{in}\n\\]\n\nand the output node is also loaded by the divider current, i.e. by an equivalent resistance \\(R_1+R_2\\) to ground.\n\n---\n\n### 2) Region of operation\nSince the gate is a fraction of the drain voltage,\n\n\\[\nV_G=\\beta V_D,\\quad 0<\\beta<1\n\\]\n\nso\n\n\\[\nV_{GD}=V_G-V_D=-(1-\\beta)V_D \\le 0\n\\]\n\nHence, when the device is on, it is **automatically in saturation**.  \nSo \\(M_1\\) is either:\n\n- **cutoff**, or\n- **saturation**\n\nbut not triode.\n\n---\n\n### 3) DC equation\nLet\n\n\\[\nR_T = R_1+R_2\n\\]\n\nThen KCL at the output gives\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}=I_D+\\frac{V_{out}}{R_T}\n\\]\n\nand, if \\(M_1\\) is on,\n\n\\[\nI_D \\approx \\frac{k_n}{2}\\left(\\beta V_{out}-V_{in}-V_T\\right)^2\n\\]\n\n(ignoring channel-length modulation).\n\nSo the DC operating point is found from\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\frac{k_n}{2}\\left(\\beta V_{out}-V_{in}-V_T\\right)^2\n+\\frac{V_{out}}{R_1+R_2}\n\\]\n\nIf the transistor is off, \\(I_D=0\\), so\n\n\\[\nV_{out} = V_{DD}\\frac{R_1+R_2}{R_D+R_1+R_2}\n\\]\n\nwhich is approximately \\(V_{DD}\\) if \\(R_1+R_2 \\gg R_D\\).\n\n---\n\n### 4) Small-signal gain\nFor small-signal analysis, \\(V_{DD}\\) is AC ground.\n\nThe output sees\n\n\\[\nR_L = R_D \\parallel (R_1+R_2)\n\\]\n\nand\n\n\\[\nv_f = \\beta v_o\n\\]\n\nSince\n\n\\[\nv_{gs}=v_f-v_i=\\beta v_o-v_i\n\\]\n\nthe drain voltage is\n\n\\[\nv_o = -g_m R_L\\, v_{gs}\n\\]\n\nthus\n\n\\[\nv_o = -g_m R_L(\\beta v_o-v_i)\n\\]\n\nSo\n\n\\[\n\\boxed{\\frac{v_o}{v_i}=\\frac{g_m R_L}{1+\\beta g_m R_L}}\n\\]\n\nwith\n\n\\[\nR_L = R_D \\parallel (R_1+R_2)\n\\]\n\nThis gain is **positive**, so the circuit is **non-inverting**.\n\n---\n\n### 5) If \\(r_o\\) is included\nA more exact low-frequency gain is\n\n\\[\n\\boxed{\n\\frac{v_o}{v_i}\n=\n\\frac{g_m+\\frac{1}{r_o}}\n{\n\\frac{1}{R_D}+\\frac{1}{R_1+R_2}+\\frac{1}{r_o}+\\beta g_m\n}\n}\n\\]\n\nUsually, if \\(r_o\\) is large, the simpler formula above is sufficient.\n\n---\n\n### 6) High-loop-gain result\nIf\n\n\\[\n\\beta g_m R_L \\gg 1\n\\]\n\nthen the gain becomes approximately resistor-set:\n\n\\[\n\\frac{v_o}{v_i}\\approx \\frac{1}{\\beta}\n= \\frac{R_1+R_2}{R_2}\n= 1+\\frac{R_1}{R_2}\n\\]\n\nSo in that limit, the circuit behaves like a **non-inverting feedback amplifier**.\n\n---\n\n### 7) Interpretation\nIf \\(V_{in}\\) rises:\n\n- \\(V_{GS}\\) tends to decrease,\n- transistor current decreases,\n- \\(V_{out}\\) rises,\n- the divider raises \\(V_F\\),\n- which restores \\(V_{GS}\\).\n\nThat is classic **negative feedback**.\n\n---\n\n### Final summary\n- The circuit is a **non-inverting MOS voltage amplifier with negative feedback**.\n- Feedback factor:\n\n\\[\n\\beta=\\frac{R_2}{R_1+R_2}\n\\]\n\n- Small-signal gain:\n\n\\[\n\\frac{v_o}{v_i}=\\frac{g_m\\big(R_D\\parallel(R_1+R_2)\\big)}{1+\\beta g_m\\big(R_D\\parallel(R_1+R_2)\\big)}\n\\]\n\n- For strong feedback:\n\n\\[\n\\boxed{\\frac{v_o}{v_i}\\approx 1+\\frac{R_1}{R_2}}\n\\]\n\nIf you want, I can also draw the equivalent small-signal model and derive this step by step.",
        "format": "markdown",
        "sha256": "259f4885fb570103827b792aad069d14f59f04b0a2673c54ff15b65f301f9d77"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven input, divider feedback to the gate, and negative feedback, and gives the correct closed-loop gain and high-loop-gain limit. The extra operating-region claim is not central to the task.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 18777,
        "total_tokens": 20376,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 18777,
        "total_tokens": 20376,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an **nMOS** and the gate current is negligible.\n\nDefine\n\n\\[\n\\alpha=\\frac{R_2}{R_1+R_2}, \\qquad R_B=R_1+R_2\n\\]\n\nThen the feedback divider gives\n\n\\[\nV_F=V_G=\\alpha V_{out}\n\\]\n\nSo the gate gets a fraction of the output voltage.\n\n---\n\n## 1) What kind of circuit is this?\n\nThis is a **source-driven, drain-loaded MOS amplifier with drain-to-gate negative feedback**.\n\n- input at the **source**: \\(V_{in}\\)\n- output at the **drain**: \\(V_{out}\\)\n- gate fed by a fraction of the output through \\(R_1,R_2\\)\n\nIt behaves like a **non-inverting amplifier**.\n\n---\n\n## 2) DC analysis\n\nAt the output node, KCL gives\n\n\\[\n\\frac{V_{DD}-V_O}{R_D}=I_D+\\frac{V_O}{R_B}\n\\]\n\nwhere \\(V_O\\equiv V_{out}\\).\n\nSince\n\n\\[\nV_G=\\alpha V_O,\\qquad V_S=V_{in}\n\\]\n\nif the transistor is on,\n\n\\[\nV_{GS}=\\alpha V_O - V_{in}\n\\]\n\nand, neglecting channel-length modulation,\n\n\\[\nI_D=\\frac{k_n}{2}\\big(\\alpha V_O - V_{in}-V_T\\big)^2\n\\]\n\nvalid when\n\n\\[\n\\alpha V_O - V_{in} > V_T\n\\]\n\nSo the DC operating point is found from\n\n\\[\n\\frac{V_{DD}-V_O}{R_D}\n=\n\\frac{V_O}{R_1+R_2}\n+\n\\frac{k_n}{2}\\big(\\alpha V_O - V_{in}-V_T\\big)^2\n\\]\n\n### If \\(M_1\\) is off\nThen \\(I_D=0\\), so the output is just the divider formed by \\(R_D\\) and \\(R_1+R_2\\):\n\n\\[\nV_O = V_{DD}\\frac{R_1+R_2}{R_D+R_1+R_2}\n\\]\n\n---\n\n## 3) Region of operation\n\nA nice property of this circuit: **if \\(M_1\\) is on, it is automatically in saturation**.\n\nSaturation requires\n\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\]\n\nUsing \\(V_D=V_O\\), \\(V_G=\\alpha V_O\\), \\(V_S=V_{in}\\),\n\n\\[\nV_O-V_{in}\\ge (\\alpha V_O-V_{in})-V_T\n\\]\n\n\\[\n(1-\\alpha)V_O + V_T \\ge 0\n\\]\n\nwhich is always true for \\(0<\\alpha<1\\) and normal positive voltages.\n\nSo the feedback keeps the transistor out of triode.\n\n---\n\n## 4) Small-signal gain\n\nFor small-signal analysis, the divider still gives\n\n\\[\nv_g=\\alpha v_o\n\\]\n\nAlso, because the gate draws no current, the output is loaded by\n\n\\[\nR_L = R_D \\parallel (R_1+R_2)\n\\]\n\nIgnoring \\(r_o\\) first, the common-gate stage gives\n\n\\[\nv_o = -g_m R_L\\, v_{gs}\n\\]\n\nand\n\n\\[\nv_{gs}=v_g-v_s=\\alpha v_o - v_i\n\\]\n\nSo\n\n\\[\nv_o=-g_mR_L(\\alpha v_o-v_i)\n\\]\n\n\\[\nv_o = g_mR_L(v_i-\\alpha v_o)\n\\]\n\nHence\n\n\\[\n\\boxed{\nA_v \\equiv \\frac{v_o}{v_i}\n=\n\\frac{g_mR_L}{1+\\alpha g_mR_L}\n}\n\\]\n\nwith\n\n\\[\nR_L=R_D\\parallel(R_1+R_2), \\qquad \\alpha=\\frac{R_2}{R_1+R_2}\n\\]\n\n---\n\n## 5) High-gain approximation\n\nIf the loop gain is large:\n\n\\[\n\\alpha g_mR_L \\gg 1\n\\]\n\nthen\n\n\\[\nA_v \\approx \\frac{1}{\\alpha}\n= \\frac{R_1+R_2}{R_2}\n\\]\n\nso\n\n\\[\n\\boxed{\nA_v \\approx 1+\\frac{R_1}{R_2}\n}\n\\]\n\nThat is the same gain form as a **non-inverting op-amp**.\n\n---\n\n## 6) Interpretation\n\nIf \\(V_{in}\\) rises:\n\n- \\(V_{GS}\\) falls\n- \\(I_D\\) falls\n- the drop across \\(R_D\\) falls\n- therefore \\(V_{out}\\) rises\n\nSo the stage is **non-inverting**.\n\nThen the rise in \\(V_{out}\\) also raises the gate voltage through the divider, which partially restores \\(V_{GS}\\). That is **negative feedback**, which:\n\n- stabilizes the bias\n- makes gain less dependent on transistor parameters\n- can make the gain mainly depend on \\(R_1/R_2\\)\n\n---\n\n## 7) More exact gain with finite \\(r_o\\)\n\nIf transistor output resistance is included,\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m+g_o}\n{\\alpha g_m+g_o+\\frac{1}{R_D}+\\frac{1}{R_1+R_2}}\n}\n\\qquad\\text{where } g_o=\\frac{1}{r_o}\n\\]\n\nIf body effect matters, \\(g_{mb}\\) adds to the numerator.\n\n---\n\n## Final result\n\nThis circuit is a **feedback common-gate / source-driven MOS amplifier**. Its key properties are:\n\n- \\(V_G=\\dfrac{R_2}{R_1+R_2}V_{out}\\)\n- if on, \\(M_1\\) is **always in saturation**\n- exact DC point comes from KCL at the output\n- small-signal gain is\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m\\big(R_D\\parallel(R_1+R_2)\\big)}\n{1+\\dfrac{R_2}{R_1+R_2}\\,g_m\\big(R_D\\parallel(R_1+R_2)\\big)}\n}\n\\]\n\napproximately\n\n\\[\n\\boxed{\nA_v \\approx 1+\\frac{R_1}{R_2}\n}\n\\]\n\nwhen the loop gain is large.\n\nIf you want, I can also draw the small-signal equivalent and derive the gain step by step from that.",
        "format": "markdown",
        "sha256": "866e137b5ad67b281dcf408a44b4ec25ee4eb9b4fcc00a2584ba51ac7161cd8b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative-feedback operation, and derives the correct closed-loop gain and large-loop-gain limit. The extra analyses are consistent with the stated topology.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 21082,
        "total_tokens": 22681,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19641,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 21082,
        "total_tokens": 22681,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19641,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an **nMOS** and is biased in conduction.  \nThis is a **common-gate-like stage with drain-to-gate resistive negative feedback**.\n\nDefine\n\n\\[\nR_F = R_1+R_2,\\qquad k_f=\\frac{R_2}{R_1+R_2}\n\\]\n\nSince MOS gate current is essentially zero,\n\n\\[\nV_G = V_F = k_f\\,V_{out}\n\\]\n\nand the divider loads the output by a resistance \\(R_F\\).\n\n---\n\n## 1) DC analysis\n\nAt the output node,\n\n\\[\n\\frac{V_{DD}-V_O}{R_D}=I_D+\\frac{V_O}{R_F}\n\\]\n\nso\n\n\\[\nI_D=\\frac{V_{DD}-V_O}{R_D}-\\frac{V_O}{R_F}\n\\]\n\nAlso,\n\n\\[\nV_{GS}=V_G-V_S = k_fV_O - V_{in}\n\\]\n\nIf \\(M_1\\) is on and in saturation, neglecting channel-length modulation,\n\n\\[\nI_D \\approx \\frac{k_n}{2}(V_{GS}-V_T)^2\n      = \\frac{k_n}{2}(k_fV_O - V_{in}-V_T)^2\n\\]\n\nThus the DC operating point is obtained from\n\n\\[\n\\frac{V_{DD}-V_O}{R_D}-\\frac{V_O}{R_F}\n=\n\\frac{k_n}{2}(k_fV_O - V_{in}-V_T)^2\n\\]\n\nThis is the large-signal equation of the circuit.\n\n### Nice property: \\(M_1\\) stays in saturation\nFor an nMOS,\n\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\]\n\nHere,\n\n\\[\nV_D-V_G = V_O-k_fV_O=(1-k_f)V_O \\ge 0\n\\]\n\nso whenever the transistor is on, the saturation condition is automatically satisfied.  \nThat is one of the useful features of this feedback bias.\n\n---\n\n## 2) Small-signal gain\n\nFor small signals, let the output load seen at the drain be\n\n\\[\nR_L = R_D \\parallel (R_1+R_2)\n\\]\n\nbecause the divider draws current but the gate does not.\n\nAlso,\n\n\\[\nv_f = k_f v_o\n\\]\n\nand\n\n\\[\nv_{gs}=v_f-v_i = k_fv_o-v_i\n\\]\n\nIgnoring \\(r_o\\), the drain current change is\n\n\\[\ni_d=g_m v_{gs}=g_m(k_fv_o-v_i)\n\\]\n\nand the drain/output voltage is\n\n\\[\nv_o = -i_dR_L\n\\]\n\nSo,\n\n\\[\nv_o=-g_mR_L(k_fv_o-v_i)\n\\]\n\nwhich gives\n\n\\[\n\\boxed{\\frac{v_o}{v_i}=\\frac{g_mR_L}{1+k_fg_mR_L}}\n\\]\n\n### Interpretation\n- The gain is **positive**: this is a **non-inverting** amplifier.\n- Negative feedback makes the gain much less sensitive to transistor parameters.\n\nIf the loop gain is large,\n\n\\[\nk_fg_mR_L \\gg 1\n\\]\n\nthen\n\n\\[\n\\boxed{\\frac{v_o}{v_i}\\approx \\frac{1}{k_f}=1+\\frac{R_1}{R_2}}\n\\]\n\nSo the circuit behaves like a **non-inverting amplifier** whose gain is set mainly by the resistor ratio.\n\n---\n\n## 3) Exact small-signal gain including \\(r_o\\)\n\nIf you include channel-length modulation (\\(r_o\\)):\n\n\\[\ng_D=\\frac1{R_D},\\qquad g_F=\\frac1{R_1+R_2},\\qquad g_o=\\frac1{r_o}\n\\]\n\nthen nodal analysis gives\n\n\\[\n\\boxed{\n\\frac{v_o}{v_i}\n=\n\\frac{g_m+g_o}{g_D+g_F+g_o+k_fg_m}\n}\n\\]\n\nIf \\(r_o\\to\\infty\\), this reduces to the simpler result above.\n\n---\n\n## 4) Input/output resistance trend\n\nBecause this is **series-shunt (voltage-series) negative feedback**:\n\n- **Input resistance increases**\n- **Output resistance decreases**\n\nApproximate results (ignoring \\(r_o\\)) are\n\n\\[\nR_{in}\\approx \\frac{1}{g_m}+k_fR_L\n\\]\n\n\\[\nR_{out}\\approx \\frac{R_L}{1+k_fg_mR_L}\n\\]\n\n---\n\n## 5) Physical operation\n\nIf \\(V_{in}\\) increases:\n\n1. source voltage rises,\n2. \\(V_{GS}\\) decreases,\n3. \\(I_D\\) decreases,\n4. drop across \\(R_D\\) decreases,\n5. \\(V_{out}\\) rises,\n6. through \\(R_1,R_2\\), the gate voltage rises too,\n7. that partly restores \\(V_{GS}\\).\n\nSo the feedback opposes the original change: **negative feedback**.\n\n---\n\n## Final result\n\nThis circuit is a **single-transistor non-inverting voltage amplifier with resistive negative feedback**.\n\nIts key small-signal gain is\n\n\\[\n\\boxed{A_v=\\frac{g_m(R_D\\parallel(R_1+R_2))}{1+\\frac{R_2}{R_1+R_2}\\,g_m(R_D\\parallel(R_1+R_2))}}\n\\]\n\nand for strong feedback,\n\n\\[\n\\boxed{A_v \\approx 1+\\frac{R_1}{R_2}}\n\\]\n\nIf you want, I can also draw the **small-signal equivalent circuit** and derive this step by step from KCL.",
        "format": "markdown",
        "sha256": "67c0f0d5c8d702330e990e1a690f0f230a1b4ab189e89165b8f758007516b9e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback. The small-signal gain and large-loop-gain limit also match the golden solution; extra resistance discussion is not required.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 24026,
        "total_tokens": 25625,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22790,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 24026,
        "total_tokens": 25625,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22790,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming both \\(M_1\\) and \\(M_2\\) are **nMOS** transistors:\n\n## 1) What the circuit is\n\n- **\\(M_1\\)** has drain at \\(V_{DD}\\), gate at \\(V_{in}\\), and source at \\(V_{out}\\)  \n  \\(\\Rightarrow\\) it is a **source follower** (common-drain stage).\n- **\\(M_2\\)** has source at ground and gate biased by \\(V_b\\)  \n  \\(\\Rightarrow\\) it acts as a **current sink** (active load), provided it stays in saturation.\n\nSo this is a **source follower biased by a current source**.\n\n---\n\n## 2) DC / large-signal analysis\n\nLet\n\n\\[\n\\beta_i=\\mu_n C_{ox}\\left(\\frac WL\\right)_i\n\\]\n\nand first ignore channel-length modulation and body effect.\n\n### Current through \\(M_2\\)\nIf \\(M_2\\) is in saturation,\n\n\\[\nI_D = \\frac{\\beta_2}{2}(V_b - V_{T2})^2\n\\]\n\nvalid if\n\n\\[\nV_b > V_{T2}, \\qquad V_{out} \\ge V_b - V_{T2}.\n\\]\n\nSo \\(M_2\\) sets the bias current.\n\n### Current through \\(M_1\\)\nFor \\(M_1\\),\n\n\\[\nV_{GS1}=V_{in}-V_{out}\n\\]\n\nand if it is in saturation,\n\n\\[\nI_D=\\frac{\\beta_1}{2}(V_{in}-V_{out}-V_{T1})^2.\n\\]\n\nAt the operating point, \\(I_{D1}=I_{D2}\\), so\n\n\\[\n\\frac{\\beta_1}{2}(V_{in}-V_{out}-V_{T1})^2\n=\n\\frac{\\beta_2}{2}(V_b-V_{T2})^2.\n\\]\n\nHence,\n\n\\[\n\\boxed{\nV_{out}\n=\nV_{in}-V_{T1}-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{T2})\n}\n\\]\n\nSo the output follows the input, shifted downward by an approximately constant amount.\n\n### Special matched-device case\nIf \\(M_1\\) and \\(M_2\\) are matched:\n\n\\[\n\\beta_1=\\beta_2,\\qquad V_{T1}=V_{T2}\n\\]\n\nthen\n\n\\[\n\\boxed{V_{out}=V_{in}-V_b}\n\\]\n\nThis is a very common result for this circuit.\n\n---\n\n## 3) Region-of-operation conditions\n\n### \\(M_2\\) saturation:\n\\[\n\\boxed{V_{out} \\ge V_b - V_{T2}}\n\\]\n\nThis is the main **lower headroom** requirement.\n\n### \\(M_1\\) saturation:\nFor \\(M_1\\),\n\n\\[\nV_{DS1}=V_{DD}-V_{out}\n\\]\n\nand saturation requires\n\n\\[\nV_{DS1}\\ge V_{GS1}-V_{T1}.\n\\]\n\nSubstitute:\n\n\\[\nV_{DD}-V_{out}\\ge (V_{in}-V_{out})-V_{T1}\n\\]\n\nso\n\n\\[\n\\boxed{V_{DD}\\ge V_{in}-V_{T1}}\n\\]\n\nUsually this is satisfied if \\(V_{in}\\) is within the supply range.\n\n### If \\(V_{in}\\) is too low\nThen \\(M_1\\) cannot supply the bias current required by \\(M_2\\), so the source-follower relation breaks down and \\(V_{out}\\) falls toward ground.\n\n---\n\n## 4) Small-signal behavior\n\nThis stage is a **buffer**: high input resistance, low output resistance, gain near +1.\n\nIf \\(V_b\\) is AC ground, then\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}\n\\]\n\nSo:\n\n- ideally, if body effect and channel-length modulation are neglected,\n\n\\[\n\\boxed{A_v \\approx 1}\n\\]\n\n- in practice, \\(A_v\\) is slightly less than 1.\n\n### Input resistance\nMOS gate current is essentially zero:\n\n\\[\n\\boxed{R_{in}\\approx \\infty}\n\\]\n\n### Output resistance\nLooking into the source of \\(M_1\\),\n\n\\[\n\\boxed{\nR_{out}\\approx \\frac{1}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}\n\\]\n\nSo the circuit has **low output resistance**, which is why it works well as a buffer.\n\n---\n\n## 5) Interpretation\n\nThis circuit is:\n\n- a **source follower**\n- an **active-load buffer**\n- a **level shifter**\n\nIt provides:\n\n- **positive gain** (non-inverting),\n- **voltage gain close to 1**,\n- **high input impedance**,\n- **low output impedance**,\n- and a DC level shift of about one \\(V_{GS}\\) of \\(M_1\\)  \n  (or exactly \\(V_b\\) in the matched ideal case).\n\n---\n\nIf you want, I can also give:\n1. the **piecewise transfer characteristic** \\(V_{out}\\) vs. \\(V_{in}\\), or  \n2. the **same analysis including body effect**.",
        "format": "markdown",
        "sha256": "314e769997d29a163744fc48141a93fa47c036e48b7272215de1168290aff262"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current sink, and gives a positive gain slightly below unity with appropriate body-effect and output-resistance terms. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 16986,
        "total_tokens": 18210,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15793,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 16986,
        "total_tokens": 18210,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15793,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the symbols mean **both \\(M_1\\) and \\(M_2\\) are nMOS**, the circuit is:\n\n- **\\(M_1\\):** a **source follower** (common-drain stage)\n- **\\(M_2\\):** a **current sink** biased by \\(V_b\\)\n\nSo this is a **non-inverting buffer / level shifter**.\n\n## 1) DC operation\n\n\\(M_2\\) sets an approximately constant bias current:\n\n\\[\nI_{D2} \\approx \\frac{1}{2}\\beta_2 (V_b - V_{T2})^2\n\\qquad \\text{if } M_2 \\text{ is in saturation}\n\\]\n\nwhere \\(\\beta_i=\\mu_n C_{ox}(W/L)_i\\).\n\nSince the output node is common to both transistors,\n\n\\[\nI_{D1}=I_{D2}\n\\]\n\nFor \\(M_1\\) in saturation,\n\n\\[\nI_{D1} \\approx \\frac{1}{2}\\beta_1 (V_{in}-V_{out}-V_{T1})^2\n\\]\n\nHence,\n\n\\[\nV_{in}-V_{out}-V_{T1}\n=\n\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{T2})\n\\]\n\nso\n\n\\[\n\\boxed{\nV_{out}\\approx V_{in}-V_{T1}-\\sqrt{\\frac{\\beta_2}{\\beta_1}}(V_b-V_{T2})\n}\n\\]\n\nThat is, **\\(V_{out}\\) follows \\(V_{in}\\)**, but shifted downward by an almost constant amount.\n\n### Special case: matched devices, no body effect\nIf \\(M_1\\) and \\(M_2\\) are identical and thresholds are equal,\n\n\\[\nV_{out}\\approx V_{in}-V_b\n\\]\n\n---\n\n## 2) Physical interpretation\n\n- If \\(V_{in}\\) rises, \\(M_1\\) tends to conduct more.\n- The source node \\(V_{out}\\) then rises too.\n- This rise reduces \\(V_{GS1}\\), providing local feedback.\n\nThat is exactly why a source follower has **gain slightly less than 1**.\n\n---\n\n## 3) Region of operation / headroom\n\nFor \\(M_2\\) to stay in saturation:\n\n\\[\nV_{out} \\ge V_b - V_{T2}\n\\]\n\nSo the **low-end output swing** is limited by the current-source transistor.\n\nFor \\(M_1\\), saturation requires:\n\n\\[\nV_{DS1} \\ge V_{GS1}-V_{T1}\n\\]\n\nHere,\n\n\\[\nV_{DS1}=V_{DD}-V_{out},\\qquad\nV_{GS1}=V_{in}-V_{out}\n\\]\n\nSo,\n\n\\[\nV_{DD}-V_{out} \\ge V_{in}-V_{out}-V_{T1}\n\\;\\Rightarrow\\;\nV_{DD} \\ge V_{in}-V_{T1}\n\\]\n\nwhich is usually true if \\(V_{in}\\le V_{DD}\\).  \nSo **\\(M_1\\) is usually in saturation automatically**.\n\n### Output swing\n- **Upper limit:** source follower cannot reach the top rail\n\n\\[\nV_{out,\\max}\\approx V_{in}-V_{GS1}\\lesssim V_{DD}-V_{GS1}\n\\]\n\n- **Lower limit for linear operation:**\n\n\\[\nV_{out,\\min}\\approx V_b-V_{T2}\n\\]\n\nOutside that range, one device leaves saturation and the simple follower relation no longer holds.\n\n---\n\n## 4) Small-signal gain\n\nWith \\(V_b\\) as AC ground, \\(M_2\\) contributes mainly its output resistance \\(r_{o2}\\).\n\nThe small-signal voltage gain is approximately\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx\n\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}\n\\]\n\nwhere \\(g_{oi}=1/r_{oi}\\).\n\nSo:\n\n- \\(A_v > 0\\)  → **non-inverting**\n- \\(A_v < 1\\)  → **slightly less than unity**\n\nIf channel-length modulation and body effect are small:\n\n\\[\nA_v \\approx 1\n\\]\n\nIf \\(M_1\\)'s bulk is tied to ground, **body effect** makes \\(g_{mb1}\\neq 0\\), reducing the gain further.\n\n---\n\n## 5) Input and output resistance\n\n- **Input resistance:** very high (MOS gate)\n  \\[\n  R_{in}\\approx \\infty\n  \\]\n\n- **Output resistance:** low\n  \\[\n  \\boxed{\n  R_{out}\\approx \\frac{1}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n  }\n  \\]\n\nThat low \\(R_{out}\\) is why this stage is useful as a **buffer**.\n\n---\n\n## Final conclusion\n\nThis circuit is an **nMOS source follower with an active current-source load**.\n\n- It gives **near-unity, non-inverting voltage gain**\n- It **level-shifts** the signal downward\n- It has **high input resistance**\n- It has **low output resistance**\n- It is useful as a **buffer / level shifter**, not as a high-gain amplifier\n\nIf you want, I can also give:\n1. the **full large-signal piecewise analysis**, or  \n2. the **small-signal derivation step by step**.",
        "format": "markdown",
        "sha256": "53adda8c157b0320f3fcc4b537e222c827d658cf4e680f7fc72066326bc17815"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as an NMOS current sink, with positive near-unity gain. Its small-signal gain and output-resistance expressions agree with the golden solution; the additional bias and headroom analysis does not undermine the essential answer.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 24568,
        "total_tokens": 25792,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23346,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 24568,
        "total_tokens": 25792,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23346,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) and \\(M_2\\) are **nMOS** transistors, this is a **source follower (common-drain) stage** biased by a **current sink**.\n\n## 1) What each transistor does\n- **\\(M_2\\)**: gate at fixed \\(V_b\\) \\(\\rightarrow\\) sets a nearly constant bias current.\n- **\\(M_1\\)**: drain at \\(V_{DD}\\), gate at \\(V_{in}\\), source at \\(V_{out}\\) \\(\\rightarrow\\) acts as a source follower.\n\nSo \\(M_2\\) fixes the current, and \\(M_1\\) adjusts \\(V_{out}\\) so that it can supply that same current.\n\n---\n\n## 2) DC analysis\nIf both transistors are in saturation and channel-length modulation is neglected:\n\n\\[\nI_{D2}=\\frac{\\beta_2}{2}(V_b-V_{T2})^2\n\\]\n\n\\[\nI_{D1}=\\frac{\\beta_1}{2}(V_{in}-V_{out}-V_{T1})^2\n\\]\n\nAt equilibrium,\n\n\\[\nI_{D1}=I_{D2}\n\\]\n\nHence,\n\n\\[\n\\frac{\\beta_1}{2}(V_{in}-V_{out}-V_{T1})^2\n=\n\\frac{\\beta_2}{2}(V_b-V_{T2})^2\n\\]\n\nSo,\n\n\\[\nV_{out}\n=\nV_{in}-V_{T1}-\\sqrt{\\frac{\\beta_2}{\\beta_1}}(V_b-V_{T2})\n\\]\n\n### Interpretation\nThus \\(V_{out}\\) **follows** \\(V_{in}\\) with slope approximately 1, but shifted down by an almost constant amount:\n\n\\[\nV_{out}\\approx V_{in}-V_{GS1}\n\\]\n\nSo this is a **voltage buffer / level shifter**.\n\n### Special case: matched transistors\nIf \\(M_1\\) and \\(M_2\\) are matched \\((\\beta_1=\\beta_2,\\;V_{T1}=V_{T2})\\),\n\n\\[\nV_{out}\\approx V_{in}-V_b\n\\]\n\n---\n\n## 3) Small-signal gain\nThis is a **non-inverting** stage.\n\nIgnoring body effect:\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx\n\\frac{g_{m1}(r_{o1}\\parallel r_{o2})}\n{1+g_{m1}(r_{o1}\\parallel r_{o2})}\n\\]\n\nSo:\n\n- if \\(r_{o1},r_{o2}\\to\\infty\\), then \\(A_v\\to 1\\)\n- in practice, \\(A_v\\) is **slightly less than 1**\n\nIf body effect is included,\n\n\\[\nA_v \\approx\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n\\]\n\n---\n\n## 4) Input and output resistances\n- **Input resistance**: very large (MOS gate)  \n  \\[\n  R_{in}\\approx \\infty\n  \\]\n\n- **Output resistance**: low, characteristic of a source follower  \n  \\[\n  R_{out}\\approx \\frac{1}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n  \\]\n  approximately \\(1/g_{m1}\\) if \\(r_o\\) is large.\n\n---\n\n## 5) Conditions for proper operation\nFor \\(M_2\\) to remain in saturation:\n\n\\[\nV_{out} \\ge V_{OV2}=V_b-V_{T2}\n\\]\n\nFor \\(M_1\\) to conduct:\n\n\\[\nV_{in}-V_{out} \\ge V_{T1}\n\\]\n\nSo the follower action holds only over a valid output range. If \\(V_{in}\\) is too low, \\(M_1\\) cannot supply the bias current and \\(V_{out}\\) falls; then \\(M_2\\) may leave saturation.\n\n---\n\n## 6) Final conclusion\nThe circuit is an **NMOS source follower biased by an NMOS current sink**.\n\n### Main result:\n- \\(V_{out}\\) tracks \\(V_{in}\\) with **gain near unity**\n- output is shifted down by roughly a constant \\(V_{GS1}\\)\n- very **high input resistance**\n- **low output resistance**\n\nSo it is mainly used as a **buffer / level shifter**, not as a high-gain amplifier.\n\nIf you want, I can also derive the **full transfer characteristic** including the region where \\(M_2\\) leaves saturation.",
        "format": "markdown",
        "sha256": "bb15abed6c10bdd04ea8ab718f3af4b2afde7137f965c5039ef4a6835a7d47d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current sink, and gives a positive gain slightly below unity with appropriate body-effect and output-resistance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 18126,
        "total_tokens": 19350,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 18126,
        "total_tokens": 19350,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** (a NOT gate).\n\n- **\\(M_2\\)** is the **pMOS pull-up** transistor connected to \\(V_{DD}\\)\n- **\\(M_1\\)** is the **nMOS pull-down** transistor connected to ground\n- Their **gates are tied together** to the input \\(V_{in}\\)\n- Their **drains are tied together** to form the output \\(V_{out}\\)\n\n## 1) Logic operation\n\n### Case 1: \\(V_{in}\\) low\n- \\(M_1\\) (nMOS) is **OFF**\n- \\(M_2\\) (pMOS) is **ON**\n- So the output is pulled up to \\(V_{DD}\\)\n\n\\[\nV_{out} \\approx V_{DD}\n\\]\n\n### Case 2: \\(V_{in}\\) high\n- \\(M_1\\) is **ON**\n- \\(M_2\\) is **OFF**\n- So the output is pulled down to ground\n\n\\[\nV_{out} \\approx 0\n\\]\n\nSo the circuit performs:\n\n\\[\nV_{out} = \\overline{V_{in}}\n\\]\n\n## 2) Truth table\n\n| \\(V_{in}\\) | \\(M_2\\) (pMOS) | \\(M_1\\) (nMOS) | \\(V_{out}\\) |\n|---|---|---|---|\n| 0 | ON | OFF | 1 |\n| 1 | OFF | ON | 0 |\n\n## 3) Device-level conditions\n\nAssuming standard threshold voltages \\(V_{Tn}\\) and \\(|V_{Tp}|\\):\n\n- nMOS turns on when\n\n\\[\nV_{in} > V_{Tn}\n\\]\n\n- pMOS turns on when\n\n\\[\nV_{DD} - V_{in} > |V_{Tp}|\n\\quad \\Rightarrow \\quad\nV_{in} < V_{DD} - |V_{Tp}|\n\\]\n\nSo for **intermediate** input voltages, both transistors may conduct at the same time.\n\n## 4) DC transfer behavior\n\nAs \\(V_{in}\\) rises from 0 to \\(V_{DD}\\):\n\n- For small \\(V_{in}\\): \\(V_{out} \\approx V_{DD}\\)\n- Near the switching region: both devices conduct, and \\(V_{out}\\) drops rapidly\n- For large \\(V_{in}\\): \\(V_{out} \\approx 0\\)\n\nSo the voltage transfer characteristic is the familiar **inverter curve**:\n- flat near \\(V_{DD}\\)\n- steep drop in the middle\n- flat near 0\n\n## 5) Switching threshold\n\nAt the inverter switching point \\(V_M\\), we often take:\n\n\\[\nV_{in} = V_{out} = V_M\n\\]\n\nAt that point both MOSFETs are typically in saturation, so their currents are equal:\n\n\\[\n\\frac{\\beta_n}{2}(V_M - V_{Tn})^2\n=\n\\frac{\\beta_p}{2}(V_{DD} - V_M - |V_{Tp}|)^2\n\\]\n\nThus,\n\n\\[\nV_M\n=\n\\frac{\n\\sqrt{\\beta_p}(V_{DD}-|V_{Tp}|)+\\sqrt{\\beta_n}V_{Tn}\n}{\n\\sqrt{\\beta_n}+\\sqrt{\\beta_p}\n}\n\\]\n\nwhere\n- \\(\\beta_n = \\mu_n C_{ox}(W/L)_n\\)\n- \\(\\beta_p = \\mu_p C_{ox}(W/L)_p\\)\n\nIf the inverter is sized symmetrically so that \\(\\beta_n \\approx \\beta_p\\) and \\(V_{Tn} \\approx |V_{Tp}|\\), then:\n\n\\[\nV_M \\approx \\frac{V_{DD}}{2}\n\\]\n\n## 6) Important properties\n\n### Rail-to-rail output\n- Output can go very close to \\(0\\) and \\(V_{DD}\\)\n\n### Very low static power\n- In steady logic states, one transistor is OFF, so ideally there is **no direct DC path** from \\(V_{DD}\\) to ground\n- Power is mainly consumed during switching\n\n### High noise margins\n- Because of the steep transition around the switching point\n\n### High input impedance\n- MOS gates draw almost no DC current\n\n## 7) During switching\nWhen \\(V_{in}\\) is in the transition region:\n- both \\(M_1\\) and \\(M_2\\) conduct briefly\n- a short-circuit current flows from \\(V_{DD}\\) to ground\n- the output capacitance is charged/discharged\n\nSo dynamically:\n- output fall time is mainly set by \\(M_1\\)\n- output rise time is mainly set by \\(M_2\\)\n\n---\n\n## Final conclusion\nThis circuit is a **CMOS inverter**. It inverts the input:\n\n- **Low input \\(\\rightarrow\\) high output**\n- **High input \\(\\rightarrow\\) low output**\n\nIt is the basic building block of CMOS digital logic because it provides:\n- full logic swing\n- high gain\n- low static power dissipation\n\nIf you want, I can also draw the **voltage transfer characteristic** or do the **region-by-region MOSFET analysis** in more detail.",
        "format": "markdown",
        "sha256": "1e5a73b85672e5844ecadf3c0f3f242de6fdf35644b7de64d93ee24b5da46aa0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and their complementary logic operation. The additional analysis is consistent with the circuit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 7165,
        "total_tokens": 7445,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6019,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 7165,
        "total_tokens": 7445,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6019,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** (a NOT gate).\n\n- **\\(M_2\\)**: PMOS transistor connected to \\(V_{DD}\\) → acts as the **pull-up**\n- **\\(M_1\\)**: NMOS transistor connected to ground → acts as the **pull-down**\n- Their **gates are tied together** and driven by \\(V_{in}\\)\n- Their **drains are tied together** at \\(V_{out}\\)\n\n## Operation\n\n### 1. \\(V_{in} = 0\\) (low)\n- NMOS \\(M_1\\): OFF, because \\(V_{GS1} = 0 < V_{TN}\\)\n- PMOS \\(M_2\\): ON, because \\(V_{SG2} = V_{DD} > |V_{TP}|\\)\n\nSo the output is pulled up to \\(V_{DD}\\):\n\n\\[\nV_{out} \\approx V_{DD}\n\\]\n\n### 2. \\(V_{in} = V_{DD}\\) (high)\n- NMOS \\(M_1\\): ON, because \\(V_{GS1} = V_{DD} > V_{TN}\\)\n- PMOS \\(M_2\\): OFF, because \\(V_{SG2} = 0\\)\n\nSo the output is pulled down to ground:\n\n\\[\nV_{out} \\approx 0\n\\]\n\n## Logic function\n\nThus the circuit performs:\n\n\\[\nV_{out} = \\overline{V_{in}}\n\\]\n\nTruth table:\n\n| \\(V_{in}\\) | \\(V_{out}\\) |\n|---|---|\n| 0 | 1 |\n| 1 | 0 |\n\n## Important features\n- **High input impedance**\n- **Rail-to-rail output**: nearly 0 or \\(V_{DD}\\)\n- **Very low static power** in steady states, since ideally one transistor is OFF\n- During switching, **both transistors may conduct briefly**, causing current from \\(V_{DD}\\) to ground\n\n## Transition region\nFor intermediate \\(V_{in}\\), both MOSFETs can be partially ON. The output then transitions sharply from high to low. The switching point is approximately where:\n\n\\[\nI_{Dn} = I_{Dp}\n\\]\n\nIf the transistors are sized symmetrically, the switching threshold is often near:\n\n\\[\nV_{in} \\approx \\frac{V_{DD}}{2}\n\\]\n\nSo, in short: **this is a CMOS inverter**.",
        "format": "markdown",
        "sha256": "ef8bde844ebec8ed972270b739f62be422ae9a954adcc1d5ad02bc73b175a741"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, including the PMOS pull-up and NMOS pull-down, and describes its complementary operation. The additional analysis is consistent with inverter behavior.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 1572,
        "total_tokens": 1852,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 1572,
        "total_tokens": 1852,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **CMOS inverter** (a NOT gate).\n\n- **\\(M_2\\)** is the **PMOS** pull-up transistor connected to \\(V_{DD}\\)\n- **\\(M_1\\)** is the **NMOS** pull-down transistor connected to ground\n- Their **gates are tied together** and driven by \\(V_{in}\\)\n- Their **drains are tied together** to form \\(V_{out}\\)\n\n## Operation\n\n### 1. \\(V_{in} = 0\\) (logic low)\n- NMOS \\(M_1\\): **OFF**\n  - \\(V_{GS1} = 0\\), so it does not conduct\n- PMOS \\(M_2\\): **ON**\n  - Its gate is low while source is at \\(V_{DD}\\), so \\(V_{SG2} = V_{DD}\\)\n\nSo the output is pulled up:\n\n\\[\nV_{out} \\approx V_{DD}\n\\]\n\n### 2. \\(V_{in} = V_{DD}\\) (logic high)\n- NMOS \\(M_1\\): **ON**\n  - \\(V_{GS1} = V_{DD}\\)\n- PMOS \\(M_2\\): **OFF**\n  - Gate and source are both near \\(V_{DD}\\), so \\(V_{SG2} \\approx 0\\)\n\nSo the output is pulled down:\n\n\\[\nV_{out} \\approx 0\n\\]\n\n## Logic function\n\n\\[\nV_{out} = \\overline{V_{in}}\n\\]\n\nTruth table:\n\n| \\(V_{in}\\) | \\(V_{out}\\) |\n|---|---|\n| 0 | 1 |\n| 1 | 0 |\n\n## For intermediate \\(V_{in}\\)\nWhen \\(V_{in}\\) is between 0 and \\(V_{DD}\\), both transistors may conduct partially. In this region:\n\n- current flows from \\(V_{DD}\\) to ground\n- \\(V_{out}\\) transitions from high to low\n- the circuit acts like a **high-gain inverting amplifier**\n\nThe switching point occurs approximately where:\n\n\\[\nI_{Dn} = I_{Dp}\n\\]\n\nIf the NMOS and PMOS are sized so their strengths are matched, the switching threshold is often near:\n\n\\[\nV_{in} \\approx \\frac{V_{DD}}{2}\n\\]\n\n## Key properties\n- **Rail-to-rail output:** \\(0\\) to \\(V_{DD}\\)\n- **Very low static power** in steady logic states\n- **High noise margins**\n- Fundamental building block of digital CMOS logic\n\nIf you want, I can also give the **DC transfer characteristic** \\(V_{out}\\) vs. \\(V_{in}\\), or derive the **switching threshold mathematically**.",
        "format": "markdown",
        "sha256": "e1adef40a502e1045390e784d754ed603d010d95bb1e4a6dcb08c547856cde8f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its PMOS pull-up and NMOS pull-down, and explains the complementary logic operation. The additional analog details are consistent with the circuit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 1121,
        "total_tokens": 1401,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 1121,
        "total_tokens": 1401,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is the standard **CMOS inverter**:\n\n- **\\(M_1\\)**: pMOS pull-up transistor, connected to \\(V_{DD}\\)\n- **\\(M_2\\)**: nMOS pull-down transistor, connected to ground\n- Both gates are driven by **\\(V_{in}\\)**\n- Their drains are tied together at **\\(V_{out}\\)**\n\n## Operation\n\n### 1. \\(V_{in}\\) low\n- pMOS \\(M_1\\) turns **ON**\n- nMOS \\(M_2\\) turns **OFF**\n\nSo the output is pulled up:\n\n\\[\nV_{out} \\approx V_{DD}\n\\]\n\n### 2. \\(V_{in}\\) high\n- pMOS \\(M_1\\) turns **OFF**\n- nMOS \\(M_2\\) turns **ON**\n\nSo the output is pulled down:\n\n\\[\nV_{out} \\approx 0\n\\]\n\nSo the circuit performs:\n\n\\[\nV_{out} = \\overline{V_{in}}\n\\]\n\nThat is, it is a **NOT gate**.\n\n---\n\n## Transition region\n\nFor intermediate values of \\(V_{in}\\), **both transistors conduct**. Then \\(V_{out}\\) is determined by the condition:\n\n\\[\nI_{D1} = I_{D2}\n\\]\n\nThis is the switching region of the inverter, where it has a large negative gain.\n\nIf long-channel square-law MOS models are assumed, the switching point \\(V_M\\) satisfies:\n\n\\[\n\\beta_n (V_M - V_{TN})^2\n=\n\\beta_p (V_{DD} - V_M - |V_{TP}|)^2\n\\]\n\nThus,\n\n\\[\nV_M =\n\\frac{\n\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|) + \\sqrt{\\beta_n}V_{TN}\n}{\n\\sqrt{\\beta_n}+\\sqrt{\\beta_p}\n}\n\\]\n\nIf the inverter is designed symmetrically, then typically:\n\n\\[\nV_M \\approx \\frac{V_{DD}}{2}\n\\]\n\n---\n\n## Key properties\n\n- **High input resistance**: gate current is ideally zero\n- **Rail-to-rail output**: output swings from 0 to \\(V_{DD}\\)\n- **Very low static power** in steady logic states\n- Power is mainly consumed during switching, when both devices are momentarily ON and when load capacitance is charged/discharged\n\n---\n\n## Summary\n\nThe circuit is a **CMOS inverter**:\n\n- **Low input \\(\\rightarrow\\) high output**\n- **High input \\(\\rightarrow\\) low output**\n\nIt is the basic building block of CMOS digital logic. If you want, I can also draw and explain its **voltage transfer characteristic (VTC)** region by region.",
        "format": "markdown",
        "sha256": "14b1dcaaa4d3adf3cd12efc7d03bcd26bd11dcddf7ccbf5434a172a55c2b6de5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as pMOS and analyzes the circuit as a standard CMOS inverter. The figure has two NMOS devices, so this violates the golden solution’s non-negotiable device-identification rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 8366,
        "total_tokens": 8661,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 8366,
        "total_tokens": 8661,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **CMOS inverter** (assuming \\(M_1\\) is a pMOS and \\(M_2\\) is an nMOS).\n\n## Structure\n- **\\(M_1\\)**: pull-up transistor from \\(V_{DD}\\) to \\(V_{out}\\)\n- **\\(M_2\\)**: pull-down transistor from \\(V_{out}\\) to ground\n- Both gates are tied together and driven by **\\(V_{in}\\)**\n\nSo the circuit implements:\n\n\\[\nV_{out}=\\overline{V_{in}}\n\\]\n\n## Operation\n\n### 1. \\(V_{in}=0\\) (logic low)\n- \\(M_1\\) turns **ON**\n- \\(M_2\\) turns **OFF**\n- Output is pulled up to \\(V_{DD}\\)\n\n\\[\nV_{out}\\approx V_{DD}\n\\]\n\n### 2. \\(V_{in}=V_{DD}\\) (logic high)\n- \\(M_1\\) turns **OFF**\n- \\(M_2\\) turns **ON**\n- Output is pulled down to ground\n\n\\[\nV_{out}\\approx 0\n\\]\n\n## Truth table\n\n| \\(V_{in}\\) | \\(M_1\\) | \\(M_2\\) | \\(V_{out}\\) |\n|---|---|---|---|\n| 0 | ON | OFF | 1 |\n| 1 | OFF | ON | 0 |\n\n## Important features\n- **Very low static power** in steady state, since ideally one transistor is OFF\n- **Rail-to-rail output**: output swings close to \\(0\\) and \\(V_{DD}\\)\n- During switching, both transistors may be partially ON briefly, causing transient current from \\(V_{DD}\\) to ground\n\n## Switching point\nFor intermediate \\(V_{in}\\), both devices can conduct. The output then transitions sharply from high to low. If the transistors are sized symmetrically, the switching threshold is roughly:\n\n\\[\nV_{in} \\approx \\frac{V_{DD}}{2}\n\\]\n\n---\n\nSo, the circuit is a **CMOS NOT gate / inverter**.",
        "format": "markdown",
        "sha256": "b79f17587727a3886e3543f30c84e2c8d28122d667d5c2e54ac2564649c7ad7a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as pMOS and analyzes the circuit as an ordinary CMOS inverter. The figure has two NMOS devices, so this violates the essential scoring gate.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3574,
        "total_tokens": 3869,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3574,
        "total_tokens": 3869,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is a **pMOS** (top device) and \\(M_2\\) is an **nMOS** (bottom device), this is the basic **CMOS inverter**.\n\n## 1) What it does\n- Input: \\(V_{in}\\)\n- Output: \\(V_{out}\\)\n\nIt implements:\n\n\\[\nV_{out} = \\overline{V_{in}}\n\\]\n\nSo it is a **NOT gate**.\n\n---\n\n## 2) How it works\n\n### When \\(V_{in}=0\\) (logic low)\n- \\(M_1\\) pMOS: ON  \n  because \\(V_{SG1}=V_{DD}-0=V_{DD} > |V_{TP}|\\)\n- \\(M_2\\) nMOS: OFF  \n  because \\(V_{GS2}=0 < V_{TN}\\)\n\nSo the output is pulled up to:\n\n\\[\nV_{out} \\approx V_{DD}\n\\]\n\n---\n\n### When \\(V_{in}=V_{DD}\\) (logic high)\n- \\(M_1\\) pMOS: OFF  \n  because \\(V_{SG1}=0\\)\n- \\(M_2\\) nMOS: ON  \n  because \\(V_{GS2}=V_{DD} > V_{TN}\\)\n\nSo the output is pulled down to:\n\n\\[\nV_{out} \\approx 0\n\\]\n\n---\n\n### When \\(V_{in}\\) is in between\nFor\n\n\\[\nV_{TN} < V_{in} < V_{DD} - |V_{TP}|\n\\]\n\nboth transistors can conduct at the same time.  \nThen \\(V_{out}\\) is determined by the condition:\n\n\\[\nI_{D1} = I_{D2}\n\\]\n\nThis is the transition region of the inverter, where the output changes rapidly from \\(V_{DD}\\) to 0.\n\n---\n\n## 3) Truth table\n\n| \\(V_{in}\\) | \\(V_{out}\\) |\n|---|---|\n| 0 | 1 |\n| 1 | 0 |\n\n---\n\n## 4) Switching threshold\nAt the switching point \\(V_M\\), typically \\(V_{in}=V_{out}=V_M\\).  \nUsing the long-channel square-law model:\n\n\\[\n\\beta_n (V_M - V_{TN})^2 = \\beta_p (V_{DD} - V_M - |V_{TP}|)^2\n\\]\n\nSo,\n\n\\[\nV_M=\n\\frac{\n\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)+\\sqrt{\\beta_n}V_{TN}\n}{\n\\sqrt{\\beta_n}+\\sqrt{\\beta_p}\n}\n\\]\n\nIf the inverter is designed symmetrically, then:\n\n\\[\nV_M \\approx \\frac{V_{DD}}{2}\n\\]\n\n---\n\n## 5) Important properties\n- **Rail-to-rail output:** \\(0\\) to \\(V_{DD}\\)\n- **Very low static power** in steady states  \n  (because one transistor is OFF)\n- **Current flows mainly during switching**\n- Around the transition point, it also behaves as a **high-gain inverting amplifier**\n\n---\n\n## 6) Final conclusion\nThis circuit is a **CMOS inverter**:\n- low input \\(\\rightarrow\\) high output\n- high input \\(\\rightarrow\\) low output\n\nIt is one of the most important basic building blocks in digital CMOS circuits.\n\nIf you want, I can also draw the **voltage transfer characteristic (VTC)** and label the operating regions of \\(M_1\\) and \\(M_2\\).",
        "format": "markdown",
        "sha256": "70450a9a4feb3ce884f84908375afc7fa86d0893287f37c11806a77e859dcd17"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer identifies the upper device as pMOS and analyzes the circuit as a conventional CMOS inverter. The golden solution requires recognizing that both devices are NMOS; this topology error triggers the scoring gate.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 7509,
        "total_tokens": 7804,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 7509,
        "total_tokens": 7804,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS common-source stage with a diode-connected PMOS load**.  \nDigitally, it behaves like an **inverting stage**; analog-wise, it is a **common-source amplifier with active load**.\n\nAssume:\n\n- \\(M_1\\): NMOS, source at ground\n- \\(M_2\\): PMOS, source at \\(V_{DD}\\), gate tied to drain\n- body effect and channel-length modulation neglected\n- \\(\\beta_n=\\mu_n C_{ox}(W/L)_1,\\quad \\beta_p=\\mu_p C_{ox}(W/L)_2\\)\n\n---\n\n## 1) Device operating conditions\n\n### PMOS \\(M_2\\)\nSince gate and drain are tied together,\n\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{out}\n\\]\n\nSo whenever \\(M_2\\) is on, it is **always in saturation**.\n\nIts current magnitude is\n\n\\[\nI_{2}=\\frac{\\beta_p}{2}\\left(V_{DD}-V_{out}-|V_{TP}|\\right)^2\n\\]\n\nvalid when\n\n\\[\nV_{DD}-V_{out} > |V_{TP}|\n\\]\n\n---\n\n### NMOS \\(M_1\\)\n\n\\[\nV_{GS1}=V_{in}, \\qquad V_{DS1}=V_{out}\n\\]\n\n- **Cutoff**: \\(V_{in}\\le V_{TN}\\)\n- **Saturation**: \\(V_{in}>V_{TN}\\) and \\(V_{out}\\ge V_{in}-V_{TN}\\)\n\n\\[\nI_1=\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n\\]\n\n- **Triode**: \\(V_{in}>V_{TN}\\) and \\(V_{out}<V_{in}-V_{TN}\\)\n\n\\[\nI_1=\\beta_n\\left[(V_{in}-V_{TN})V_{out}-\\frac{V_{out}^2}{2}\\right]\n\\]\n\nAt DC, the node satisfies:\n\n\\[\nI_1 = I_2\n\\]\n\n---\n\n## 2) Transfer characteristic \\(V_{out}(V_{in})\\)\n\n## Region A: \\(M_1\\) off\nIf\n\n\\[\nV_{in}\\le V_{TN}\n\\]\n\nthen \\(M_1\\) is off, so the PMOS pulls the node up until it just turns off. Thus the usual first-order high level is\n\n\\[\nV_{out}\\approx V_{OH}\\approx V_{DD}-|V_{TP}|\n\\]\n\n(Strictly, in the ideal model the node can float once \\(M_2\\) turns off, but this is the standard reachable DC high level.)\n\n---\n\n## Region B: \\(M_1\\) in saturation, \\(M_2\\) in saturation\nSet the two saturation currents equal:\n\n\\[\n\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{out}-|V_{TP}|)^2\n\\]\n\nSo\n\n\\[\nV_{out}\n=\nV_{DD}-|V_{TP}|\n-\n\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,(V_{in}-V_{TN})\n\\]\n\nThis is valid as long as \\(M_1\\) remains in saturation:\n\n\\[\nV_{out}\\ge V_{in}-V_{TN}\n\\]\n\nwhich gives the boundary\n\n\\[\nV_{in}\\le\nV_{TN}\n+\n\\frac{V_{DD}-|V_{TP}|}{1+\\sqrt{\\beta_n/\\beta_p}}\n\\]\n\n---\n\n## Region C: \\(M_1\\) in triode, \\(M_2\\) in saturation\nFor larger \\(V_{in}\\), \\(M_1\\) enters triode. Then\n\n\\[\n\\beta_n\\left[(V_{in}-V_{TN})V_{out}-\\frac{V_{out}^2}{2}\\right]\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{out}-|V_{TP}|)^2\n\\]\n\nThis quadratic gives the low-output branch.\n\n---\n\n## 3) Qualitative behavior\n\n- When \\(V_{in}\\) is low, \\(M_1\\) is off, so \\(V_{out}\\) is high.\n- As \\(V_{in}\\) rises above \\(V_{TN}\\), \\(M_1\\) sinks more current, so \\(V_{out}\\) falls.\n- Thus the circuit is **inverting**.\n\n---\n\n## 4) Important observations\n\n### Not rail-to-rail\nThe output high is limited to about\n\n\\[\nV_{OH}\\approx V_{DD}-|V_{TP}|\n\\]\n\nnot \\(V_{DD}\\) in the first-order model.\n\nAlso, the low level \\(V_{OL}\\) is generally **not exactly 0 V** unless \\(M_1\\) is much stronger than \\(M_2\\).\n\nSo this is **not a full CMOS inverter**.\n\n---\n\n### Static power dissipation\nWhenever \\(M_1\\) is on, there is a DC path:\n\n\\[\nV_{DD}\\rightarrow M_2 \\rightarrow M_1 \\rightarrow \\text{ground}\n\\]\n\nSo it consumes **static power** for high enough input.\n\n---\n\n### Ratioed behavior\nThe logic levels depend on the strength ratio \\(\\beta_n/\\beta_p\\).  \nThat makes it a **ratioed inverter**, unlike a CMOS inverter.\n\n---\n\n## 5) Small-signal gain if used as an amplifier\n\nAround a bias point where both transistors are on:\n\n\\[\nA_v \\approx -\\frac{g_{m1}}{g_{m2}+g_{o1}+g_{o2}}\n\\]\n\nIf \\(r_o\\) is large,\n\n\\[\nA_v \\approx -\\frac{g_{m1}}{g_{m2}}\n\\]\n\nSince \\(M_2\\) is diode-connected, it behaves like a load of about \\(1/g_{m2}\\), so the gain is only moderate.\n\nIgnoring \\(r_o\\), and with both devices in saturation,\n\n\\[\n|A_v| \\approx \\sqrt{\\frac{\\beta_n}{\\beta_p}}\n\\]\n\n---\n\n## 6) Summary\n\nThis circuit is a:\n\n- **common-source NMOS amplifier**\n- with a **diode-connected PMOS load**\n- and, viewed digitally, an **inverting stage**\n\nKey results:\n\n\\[\nV_{OH}\\approx V_{DD}-|V_{TP}|\n\\]\n\n\\[\nV_{out}\n=\nV_{DD}-|V_{TP}|\n-\n\\sqrt{\\frac{\\beta_n}{\\beta_p}}(V_{in}-V_{TN})\n\\quad \\text{(both in saturation)}\n\\]\n\nIt is **inverting**, **ratioed**, **non-rail-to-rail**, and **dissipates static power** when on.\n\nIf you want, I can also draw the **piecewise transfer curve** or derive the **switching threshold** \\(V_M\\).",
        "format": "markdown",
        "sha256": "27806ade0c89e77ddc19abd649070cff56f91e81bd3040d35d0fc6ea085c462a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS with diode-connected PMOS load and gives the inverting gain, including both devices’ output conductances; its large-ro assumptions recover −gm1/gm2.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 17063,
        "total_tokens": 17783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 17063,
        "total_tokens": 17783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an NMOS and \\(M_2\\) is a PMOS, the circuit is a **common-source NMOS stage with a diode-connected PMOS load**.\n\n## 1) What the circuit does\n- \\(M_1\\) is the **pull-down** device, controlled by \\(V_{in}\\).\n- \\(M_2\\) has **gate tied to drain**, so it behaves like a **diode-connected active load** from \\(V_{DD}\\) to \\(V_{out}\\).\n\nSo the circuit is **inverting**: increasing \\(V_{in}\\) turns \\(M_1\\) on harder and pulls \\(V_{out}\\) down.\n\n---\n\n## 2) Device conditions\n\nLet\n\n- \\(\\beta_n=\\mu_n C_{ox}(W/L)_1\\)\n- \\(\\beta_p=\\mu_p C_{ox}(W/L)_2\\)\n- \\(V_{TN}>0\\), \\(|V_{TP}|>0\\)\n\nAssume long-channel square-law MOSFETs and ignore channel-length modulation.\n\n### PMOS load \\(M_2\\)\nFor \\(M_2\\):\n\\[\nV_{SG2}=V_{DD}-V_{out}, \\qquad V_{SD2}=V_{DD}-V_{out}\n\\]\n\nBecause gate and drain are tied, **whenever \\(M_2\\) is ON it is in saturation**.\n\nIts current magnitude is\n\\[\nI_{D2}=\\frac{\\beta_p}{2}\\left(V_{DD}-V_{out}-|V_{TP}|\\right)^2\n\\]\n(valid when \\(V_{DD}-V_{out}> |V_{TP}|\\)).\n\n### NMOS \\(M_1\\)\nFor \\(M_1\\):\n\\[\nV_{GS1}=V_{in}, \\qquad V_{DS1}=V_{out}\n\\]\n\n- **OFF** if \\(V_{in}<V_{TN}\\)\n- **Saturation** if \\(V_{in}>V_{TN}\\) and \\(V_{out}\\ge V_{in}-V_{TN}\\)\n- **Triode** if \\(V_{in}>V_{TN}\\) and \\(V_{out}<V_{in}-V_{TN}\\)\n\nCurrents:\n\n- Saturation:\n\\[\nI_{D1}=\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n\\]\n\n- Triode:\n\\[\nI_{D1}=\\beta_n\\left[(V_{in}-V_{TN})V_{out}-\\frac{V_{out}^2}{2}\\right]\n\\]\n\nAt DC, the output is found from:\n\\[\nI_{D1}=I_{D2}\n\\]\n\n---\n\n## 3) DC transfer characteristic \\(V_{out}(V_{in})\\)\n\n### Case A: \\(V_{in}<V_{TN}\\)\n\\(M_1\\) is OFF.\n\nThen \\(M_2\\) pulls the output up until it reaches about\n\\[\nV_{out}\\approx V_{DD}-|V_{TP}|\n\\]\n(ideal model; after that \\(M_2\\) cuts off).\n\nSo the high level is approximately:\n\\[\nV_{OH}\\approx V_{DD}-|V_{TP}|\n\\]\n\n---\n\n### Case B: \\(M_1\\) in saturation\nSet \\(I_{D1}=I_{D2}\\):\n\\[\n\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{out}-|V_{TP}|)^2\n\\]\n\nSo\n\\[\nV_{out}=V_{DD}-|V_{TP}|-\\sqrt{\\frac{\\beta_n}{\\beta_p}}(V_{in}-V_{TN})\n\\]\n\nThis is valid as long as \\(M_1\\) remains in saturation:\n\\[\nV_{out}\\ge V_{in}-V_{TN}\n\\]\n\nwhich gives the boundary\n\\[\nV_{in}\\le\nV_{TN}+\\frac{V_{DD}-|V_{TP}|}{1+\\sqrt{\\beta_n/\\beta_p}}\n\\]\n\n---\n\n### Case C: \\(M_1\\) in triode\nNow use the triode current of \\(M_1\\):\n\\[\n\\beta_n\\left[(V_{in}-V_{TN})V_{out}-\\frac{V_{out}^2}{2}\\right]\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{out}-|V_{TP}|)^2\n\\]\n\nThis gives a quadratic in \\(V_{out}\\).  \nThe physically meaningful solution is the **smaller root**.\n\nIn this region, \\(V_{out}\\) approaches a low value, but generally\n\\[\nV_{OL}>0\n\\]\nso the output low is **not exactly ground**.\n\n---\n\n## 4) Key observations\n\n### As a logic gate\nThis behaves like an **inverter**, but not a full CMOS inverter.\n\n#### Drawbacks:\n- High level is limited to about\n  \\[\n  V_{DD}-|V_{TP}|\n  \\]\n- Low level is greater than 0\n- There is **static power dissipation** when \\(M_1\\) is ON, because both transistors conduct\n\nSo this is a **ratioed / active-load inverter**, not rail-to-rail CMOS logic.\n\n---\n\n## 5) Small-signal view\nIf the circuit is biased with \\(M_1\\) in saturation, it is a **common-source amplifier** with diode-connected load.\n\nSmall-signal gain:\n\\[\nA_v \\approx -\\frac{g_{m1}}{g_{m2}+g_{o1}+g_{o2}}\n\\]\nand if \\(r_o\\) is large,\n\\[\nA_v \\approx -\\frac{g_{m1}}{g_{m2}}\n\\approx -\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n\\]\n\nSo the stage gives **negative gain**, but not very large, because the diode-connected load has relatively low small-signal resistance.\n\n---\n\n## Final summary\n- \\(M_2\\) is a **diode-connected PMOS load**\n- \\(M_1\\) is an **NMOS pull-down**\n- The circuit is **inverting**\n- DC operation is found by equating \\(I_{D1}\\) and \\(I_{D2}\\)\n- Output swing is limited:\n  - \\(V_{OH}\\approx V_{DD}-|V_{TP}|\\)\n  - \\(V_{OL}>0\\)\n- It dissipates **static current** when the input is high\n\nIf you want, I can also draw the **piecewise transfer curve** \\(V_{out}\\) vs. \\(V_{in}\\) or solve it for specific transistor parameters.",
        "format": "markdown",
        "sha256": "e9875c9752527312f0e501dd73267a3a682a4aafecbb89f73c6de4649fb07d5d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives an inverting gain including both devices’ output conductances, consistent with the accepted gain forms.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 25109,
        "total_tokens": 25829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23640,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 25109,
        "total_tokens": 25829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23640,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS common-source stage with a diode-connected PMOS load**.\n\n- \\(M_1\\): NMOS pull-down, controlled by \\(V_{in}\\)\n- \\(M_2\\): PMOS pull-up, with **gate tied to drain**, so it is diode-connected\n- Output is the common drain node \\(V_{out}\\)\n\nAssume long-channel MOSFETs, ignore channel-length modulation and body effect, and define\n\n\\[\n\\beta_n=\\mu_n C_{ox}(W/L)_1,\\qquad \\beta_p=\\mu_p C_{ox}(W/L)_2\n\\]\n\nwith thresholds \\(V_{TN}\\) and \\(|V_{TP}|\\).\n\n---\n\n## 1) Key observation about \\(M_2\\)\n\nSince \\(M_2\\) is diode-connected,\n\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{out}\n\\]\n\nWhen it is on, it is **always in saturation**.\n\nSo its current magnitude is\n\n\\[\n|I_{D2}|=\\frac{\\beta_p}{2}\\left(V_{DD}-V_{out}-|V_{TP}|\\right)^2\n\\]\n\nfor \\(V_{out}<V_{DD}-|V_{TP}|\\).\n\nAt DC, the output is found from current balance:\n\n\\[\nI_{D1}=|I_{D2}|\n\\]\n\n---\n\n## 2) DC transfer characteristic\n\nLet\n\n\\[\nV_X = V_{DD}-|V_{TP}|\n\\]\n\n### Region A: \\(V_{in}\\le V_{TN}\\)\n\n\\(M_1\\) is OFF.\n\nThen \\(M_2\\) pulls the output up until it just turns off, so\n\n\\[\nV_{out}\\approx V_{DD}-|V_{TP}|=V_X\n\\]\n\nThus the high output is **not full rail**; it is threshold-degraded.\n\n---\n\n### Region B: \\(M_1\\) ON and in saturation\n\nFor \\(M_1\\),\n\n\\[\nI_{D1}=\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n\\]\n\nEquating with \\(M_2\\)'s current:\n\n\\[\n\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_X-V_{out})^2\n\\]\n\nSo\n\n\\[\nV_{out}=V_X-\\sqrt{\\frac{\\beta_n}{\\beta_p}}(V_{in}-V_{TN})\n\\]\n\nThis is valid while \\(M_1\\) remains saturated:\n\n\\[\nV_{out}\\ge V_{in}-V_{TN}\n\\]\n\nwhich gives the region limit\n\n\\[\nV_{in}\\le V_{TN}+\\frac{V_X}{1+\\sqrt{\\beta_n/\\beta_p}}\n\\]\n\n---\n\n### Region C: \\(M_1\\) in triode, \\(M_2\\) still saturated\n\nNow\n\n\\[\nI_{D1}=\\beta_n\\left[(V_{in}-V_{TN})V_{out}-\\frac{V_{out}^2}{2}\\right]\n\\]\n\nand\n\n\\[\n\\beta_n\\left[(V_{in}-V_{TN})V_{out}-\\frac{V_{out}^2}{2}\\right]\n=\n\\frac{\\beta_p}{2}(V_X-V_{out})^2\n\\]\n\nThis determines the low output level.\n\nSo as \\(V_{in}\\) becomes large, \\(V_{out}\\) goes low, but the exact \\(V_{OL}\\) depends on the device ratio \\(\\beta_n/\\beta_p\\).\n\n---\n\n## 3) Inverter behavior\n\nThis circuit is an **inverter**:\n\n- \\(V_{in}\\) low \\(\\Rightarrow M_1\\) off \\(\\Rightarrow V_{out}\\) high\n- \\(V_{in}\\) high \\(\\Rightarrow M_1\\) on \\(\\Rightarrow V_{out}\\) low\n\nBut it is **not a CMOS inverter**, because:\n\n1. \\(V_{OH}\\approx V_{DD}-|V_{TP}|\\), not \\(V_{DD}\\)\n2. There is **static power dissipation** whenever \\(M_1\\) is on, since current flows\n   \\[\n   V_{DD}\\to M_2 \\to M_1 \\to \\text{ground}\n   \\]\n\n---\n\n## 4) Trip point \\(V_M\\) (where \\(V_{out}=V_{in}\\))\n\nAt the switching point, \\(M_1\\) is in saturation, so\n\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{TP}|)^2\n\\]\n\nHence,\n\n\\[\nV_M=\n\\frac{\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)+\\sqrt{\\beta_n}V_{TN}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n\\]\n\n---\n\n## 5) Small-signal gain (if used as an amplifier)\n\nAround a bias point where both devices conduct and \\(M_1\\) is saturated:\n\n- \\(M_1\\) provides transconductance \\(g_{m1}\\)\n- Diode-connected \\(M_2\\) acts like a load resistance \\(\\approx 1/g_{m2}\\)\n\nSo\n\n\\[\nA_v \\approx -\\frac{g_{m1}}{g_{m2}+g_{o1}+g_{o2}}\n\\]\n\nand if \\(r_o\\) is large,\n\n\\[\nA_v \\approx -\\frac{g_{m1}}{g_{m2}}\n\\approx -\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n\\]\n\nSo the gain is modest because the diode-connected load has relatively low small-signal resistance.\n\n---\n\n## Final summary\n\nThis circuit is a **common-source NMOS amplifier / inverter with a diode-connected PMOS load**.\n\n### Main results:\n- \\(M_2\\) is always in saturation when on\n- \\(V_{out}\\) is set by \\(I_{D1}=|I_{D2}|\\)\n- High output:\n  \\[\n  V_{OH}\\approx V_{DD}-|V_{TP}|\n  \\]\n- In the sat-sat region:\n  \\[\n  V_{out}=V_{DD}-|V_{TP}|-\\sqrt{\\frac{\\beta_n}{\\beta_p}}(V_{in}-V_{TN})\n  \\]\n- At larger \\(V_{in}\\), \\(M_1\\) enters triode and \\(V_{out}\\) is found from the triode/saturation current equation\n- It inverts, but has **degraded high level** and **static power dissipation**\n\nIf you want, I can also draw the **full VTC curve** or solve it for specific transistor parameters.",
        "format": "markdown",
        "sha256": "d16a8cf8c6f38c93a3e3125bd5b0b68447875e0fd08701a2711570864a11cd9a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including a consistent channel-length-modulation form. The additional large-signal discussion is not required and does not undermine the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 15368,
        "total_tokens": 16088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13882,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 15368,
        "total_tokens": 16088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13882,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the symbols mean **pMOS** devices, the circuit is:\n\n- **\\(M_2\\)**: a pMOS with source at \\(V_{DD}\\), gate at \\(V_{in}\\), drain at \\(V_{out}\\)\n- **\\(M_1\\)**: a **diode-connected pMOS** load, since its **gate and drain are both tied to ground**\n\nSo this is a **pMOS common-source inverting stage with a diode-connected load**.\n\n## 1) Basic operation\n\n- If \\(V_{in}\\) is **low**, \\(M_2\\) turns **on strongly** and pulls \\(V_{out}\\) upward.\n- If \\(V_{in}\\) is **high**, \\(M_2\\) turns **off/weak**, and \\(M_1\\) pulls \\(V_{out}\\) downward.\n\nSo the circuit is **inverting**:\n\\[\nV_{in}\\uparrow \\;\\Rightarrow\\; V_{out}\\downarrow\n\\]\n\n---\n\n## 2) Device voltages\n\nFor \\(M_2\\):\n\\[\nV_{SG2}=V_{DD}-V_{in}, \\qquad V_{SD2}=V_{DD}-V_{out}\n\\]\n\nFor \\(M_1\\):\n\\[\nV_{SG1}=V_{out}, \\qquad V_{SD1}=V_{out}\n\\]\n\nSince \\(V_{SD1}=V_{SG1}\\), the diode-connected device \\(M_1\\) is **always in saturation when on**.\n\n---\n\n## 3) DC current equations\n\nAt the output node, in steady state:\n\\[\nI_{D2}=I_{D1}\n\\]\n\nIgnoring channel-length modulation and body effect:\n\n### Load transistor \\(M_1\\) (always saturated when on)\n\\[\nI_{D1}=\\frac{\\beta_1}{2}\\bigl(V_{out}-|V_{TP1}|\\bigr)^2\n\\qquad (V_{out}>|V_{TP1}|)\n\\]\n\n### Input transistor \\(M_2\\)\n\n#### If \\(M_2\\) is saturated:\n\\[\nI_{D2}=\\frac{\\beta_2}{2}\\bigl(V_{DD}-V_{in}-|V_{TP2}|\\bigr)^2\n\\]\nwith saturation condition\n\\[\nV_{out}\\le V_{in}+|V_{TP2}|\n\\]\n\nEquating currents:\n\\[\n\\frac{\\beta_2}{2}(V_{DD}-V_{in}-|V_{TP2}|)^2\n=\n\\frac{\\beta_1}{2}(V_{out}-|V_{TP1}|)^2\n\\]\n\nHence\n\\[\nV_{out}\n=\n|V_{TP1}|\n+\n\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n\\,(V_{DD}-V_{in}-|V_{TP2}|)\n\\]\n\n---\n\n## 4) Important special case: matched transistors\n\nIf\n\\[\n\\beta_1=\\beta_2,\\qquad |V_{TP1}|=|V_{TP2}|=|V_T|\n\\]\nthen in the region where both are saturated,\n\\[\nV_{out}=V_{DD}-V_{in}\n\\]\n\nSo in that region, the circuit behaves like an **analog inverter** with slope about \\(-1\\).\n\n---\n\n## 5) Region behavior\n\n### Low \\(V_{in}\\)\n- \\(M_2\\) is strong\n- \\(V_{out}\\) rises\n- \\(M_2\\) may enter **triode**\n- Output goes near the upper rail\n\n### Intermediate \\(V_{in}\\)\n- Both devices can be in saturation\n- If matched:\n  \\[\n  V_{out}\\approx V_{DD}-V_{in}\n  \\]\n\n### High \\(V_{in}\\)\n- \\(M_2\\) becomes weak/off\n- \\(M_1\\) discharges the output\n- But because \\(M_1\\) is diode-connected, the low level is only pulled down to about\n  \\[\n  V_{out}\\approx |V_{TP1}|\n  \\]\n  not an ideal 0 V\n\n---\n\n## 6) What this means practically\n\nThis circuit is:\n\n- an **inverting stage**\n- a **common-source amplifier** with a **diode-connected load**\n- **not rail-to-rail**\n- it has **static power dissipation** whenever both transistors conduct\n\nSo it is **not as good as CMOS logic** for digital use, but it is a valid MOS load-stage and is often analyzed as an analog inverter.\n\nIf you want, I can also draw the **piecewise transfer characteristic \\(V_{out}(V_{in})\\)** or derive the **small-signal gain** explicitly.",
        "format": "markdown",
        "sha256": "d830935122a47c17f2426feab7fbee820db502224a2c256017dc549e070c60ad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate/drain at ground. Its current-balance equations derive the transfer slope (−1 for matched devices), providing the required equivalent explanation of the gm/gm gain.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 29920,
        "total_tokens": 31598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28891,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 29920,
        "total_tokens": 31598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28891,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the intended interpretation is:\n\n- \\(M_2\\): nMOS with drain at \\(V_{DD}\\), gate at \\(V_{in}\\), source at \\(V_{out}\\)\n- \\(M_1\\): an **always-on** pull-down device (typically a depletion nMOS), with gate and source grounded\n\nthen this circuit is a **source follower (common-drain stage)** with an active pull-down load.\n\n## 1) Qualitative operation\n\n- \\(M_2\\) tries to pull \\(V_{out}\\) upward from \\(V_{DD}\\).\n- \\(M_1\\) pulls \\(V_{out}\\) downward toward ground.\n- The output settles where\n\\[\nI_{D2}=I_{D1}.\n\\]\n\nBecause the output is taken from the **source** of \\(M_2\\), the circuit is **non-inverting** and behaves like a buffer/level shifter:\n\\[\nV_{out} \\approx V_{in} - \\text{(some nearly constant drop)}.\n\\]\n\n---\n\n## 2) Region of operation\n\nLet \\(\\beta_i=\\mu_n C_{ox}(W/L)_i\\), and use the square-law model, ignoring channel-length modulation.\n\n### Transistor \\(M_2\\)\n\\[\nV_{GS2}=V_{in}-V_{out}, \\qquad V_{DS2}=V_{DD}-V_{out}.\n\\]\n\nFor the usual case \\(0 \\le V_{in}\\le V_{DD}\\) and \\(M_2\\) being enhancement nMOS, \\(M_2\\) is in **saturation whenever it is on**, because\n\\[\nV_{DS2}\\ge V_{GS2}-V_{T2}\n\\]\nreduces to\n\\[\nV_{DD}\\ge V_{in}-V_{T2},\n\\]\nwhich is normally true.\n\nSo, when on,\n\\[\nI_{D2}=\\frac{\\beta_2}{2}(V_{in}-V_{out}-V_{T2})^2.\n\\]\n\n### Transistor \\(M_1\\)\nSince gate and source are grounded,\n\\[\nV_{GS1}=0.\n\\]\nSo \\(M_1\\) must be a depletion-mode (or otherwise always-on) device for this circuit to make sense as a DC stage.\n\nIf \\(V_{T1}<0\\):\n\n- For \\(V_{out}\\ge |V_{T1}|\\), \\(M_1\\) is in saturation:\n\\[\nI_{D1}=\\frac{\\beta_1}{2}|V_{T1}|^2.\n\\]\n\n- For \\(0\\le V_{out}<|V_{T1}|\\), \\(M_1\\) is in triode:\n\\[\nI_{D1}=\\beta_1\\left(|V_{T1}|V_{out}-\\frac{V_{out}^2}{2}\\right).\n\\]\n\n---\n\n## 3) Transfer characteristic\n\n### Case A: low input\nIf \\(V_{in}\\lesssim V_{T2}\\), \\(M_2\\) is off, so \\(M_1\\) pulls the output down:\n\\[\nV_{out}\\approx 0.\n\\]\n\n### Case B: normal follower region\nWhen \\(M_1\\) is saturated,\n\\[\nI_{D2}=I_{D1}\n\\]\ngives\n\\[\n\\frac{\\beta_2}{2}(V_{in}-V_{out}-V_{T2})^2\n=\n\\frac{\\beta_1}{2}|V_{T1}|^2.\n\\]\n\nHence\n\\[\nV_{out}\n=\nV_{in}-V_{T2}-|V_{T1}|\\sqrt{\\frac{\\beta_1}{\\beta_2}}.\n\\]\n\nSo the output follows the input with slope \\(\\approx 1\\), but shifted downward by a constant.\n\nThis is the key result:\n\\[\n\\boxed{V_{out}\\approx V_{in}-\\text{constant}}\n\\]\n\n### Case C: very small \\(V_{out}\\)\nIf \\(M_1\\) is in triode, then\n\\[\n\\frac{\\beta_2}{2}(V_{in}-V_{out}-V_{T2})^2\n=\n\\beta_1\\left(|V_{T1}|V_{out}-\\frac{V_{out}^2}{2}\\right),\n\\]\nwhich gives the exact lower-end part of the transfer curve.\n\n---\n\n## 4) What the circuit does\n\nSo this stage is:\n\n- a **non-inverting buffer**\n- a **source follower**\n- a **level shifter** (output is below input by roughly \\(V_{GS2}\\))\n- **high input impedance**\n- **low output impedance**\n- **voltage gain slightly less than 1**\n\nIt is **not rail-to-rail**:\neven with \\(V_{in}=V_{DD}\\), the highest output is still below \\(V_{DD}\\).\n\n---\n\n## 5) Small-signal gain\n\nAround a bias point, the gain is approximately\n\\[\nA_v \\approx \\frac{g_{m2}}{g_{m2}+g_{o1}+g_{o2}}\n\\]\n(or slightly smaller if body effect is included).\n\nThus\n\\[\nA_v<1,\n\\]\nbut usually close to 1.\n\n---\n\n## 6) Important note\n\nIf \\(M_1\\) were an ordinary enhancement nMOS, then with \\(V_{GS1}=0\\) it would be **off**, and the output would float when \\(M_2\\) turns off. So the useful interpretation is that \\(M_1\\) is a depletion-load / always-on sink.\n\n---\n\n## Final summary\n\n\\[\n\\boxed{\\text{This is an NMOS source follower with an active pull-down load.}}\n\\]\n\nIts DC behavior is roughly:\n\n- \\(V_{in}\\) low \\(\\Rightarrow V_{out}\\approx 0\\)\n- \\(V_{in}\\) high enough \\(\\Rightarrow V_{out}\\) tracks \\(V_{in}\\) with\n\\[\n\\boxed{V_{out}\\approx V_{in}-V_{T2}-|V_{T1}|\\sqrt{\\beta_1/\\beta_2}}\n\\]\nin the main operating region.\n\nIf you want, I can also draw the **piecewise voltage-transfer curve \\(V_{out}\\) vs. \\(V_{in}\\)** for this circuit.",
        "format": "markdown",
        "sha256": "63699ef5359a28c3ee8c8d457218d66bbbf190f5e65e0eedb92a3d3fcd3f6750"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies both devices as nMOS and analyzes a source follower. The actual circuit is a PMOS common-source stage with a diode-connected PMOS load and gain approximately \\(-g_{m2}/g_{m1}\\).",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 20335,
        "total_tokens": 22013,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18954,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 20335,
        "total_tokens": 22013,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18954,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the symbols are **pMOS transistors**, this is a **pMOS common-source stage with a diode-connected pMOS load**.\n\n## 1) Identify the devices\n- **\\(M_2\\)**: pMOS pull-up transistor  \n  - source at \\(V_{DD}\\)\n  - gate driven by \\(V_{in}\\)\n  - drain at \\(V_{out}\\)\n\n- **\\(M_1\\)**: pMOS **diode-connected load**\n  - gate and drain both at ground\n  - source at \\(V_{out}\\)\n\nSo \\(M_2\\) sources current from \\(V_{DD}\\), and \\(M_1\\) pulls current to ground.\n\n---\n\n## 2) Qualitative behavior\n- If **\\(V_{in}\\) is low**, \\(M_2\\) turns **on strongly**, so it tries to pull \\(V_{out}\\) up.\n- As \\(V_{out}\\) rises, \\(M_1\\) turns on and sinks more current to ground.\n- The DC output is set by the condition  \n  \\[\n  I_{M_2}=I_{M_1}\n  \\]\n\n- If **\\(V_{in}\\) is high**, \\(M_2\\) turns **off**, and \\(M_1\\) discharges the output node downward.\n\nSo the circuit behaves as an **inverter**:\n- low \\(V_{in}\\)  \\(\\rightarrow\\) high \\(V_{out}\\)\n- high \\(V_{in}\\) \\(\\rightarrow\\) low \\(V_{out}\\)\n\nBut it is **not rail-to-rail**, and it draws **static power** whenever both transistors are on.\n\n---\n\n## 3) DC equations\nLet \\(\\beta_i=\\mu_p C_{ox}(W/L)_i\\), and use \\(|V_{TPi}|\\) for threshold magnitudes.\n\n### \\(M_1\\): diode-connected pMOS\nSince gate and drain are both at 0 V,\n\\[\nV_{SG1}=V_{out}, \\qquad V_{SD1}=V_{out}\n\\]\nThus if it is on, it is always in **saturation**:\n\\[\nI_{M_1}=\\frac{\\beta_1}{2}(V_{out}-|V_{TP1}|)^2\n\\quad\\text{for } V_{out}>|V_{TP1}|\n\\]\n\n### \\(M_2\\): input transistor\n\\[\nV_{SG2}=V_{DD}-V_{in}\n\\]\nSo \\(M_2\\) is on when\n\\[\nV_{in}<V_{DD}-|V_{TP2}|\n\\]\n\nIf \\(M_2\\) is in **saturation**:\n\\[\nI_{M_2}=\\frac{\\beta_2}{2}(V_{DD}-V_{in}-|V_{TP2}|)^2\n\\]\nwith region condition\n\\[\nV_{out}\\le V_{in}+|V_{TP2}|\n\\]\n\nEquating currents:\n\\[\n\\frac{\\beta_2}{2}(V_{DD}-V_{in}-|V_{TP2}|)^2\n=\n\\frac{\\beta_1}{2}(V_{out}-|V_{TP1}|)^2\n\\]\n\nHence,\n\\[\nV_{out}\n=\n|V_{TP1}|\n+\n\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n\\,(V_{DD}-V_{in}-|V_{TP2}|)\n\\]\n\n---\n\n## 4) Important special case: matched devices\nIf\n- \\(\\beta_1=\\beta_2\\)\n- \\(|V_{TP1}|=|V_{TP2}|=|V_T|\\)\n\nthen in the region where both are saturated,\n\\[\nV_{out}=V_{DD}-V_{in}\n\\]\n\nSo the transfer slope is \\(-1\\).\n\n---\n\n## 5) Output limits\n### High output\nFor very low \\(V_{in}\\), \\(M_2\\) becomes strong and may enter triode, so \\(V_{out}\\) approaches a maximum below \\(V_{DD}\\).\n\nFor identical devices, at \\(V_{in}=0\\),\n\\[\nV_{OH}=|V_T|+\\frac{V_{DD}-|V_T|}{\\sqrt{2}}\n\\]\nwhich is clearly **less than \\(V_{DD}\\)**.\n\n### Low output\nWhen \\(M_2\\) turns off, \\(M_1\\) can discharge the node only until\n\\[\nV_{SG1}\\approx |V_T|\n\\]\nso the low level is roughly\n\\[\nV_{OL}\\approx |V_T|\n\\]\nin the ideal square-law picture.\n\nSo this inverter does **not** pull all the way to 0 V strongly.\n\n---\n\n## 6) Small-signal view\nThis is also a **common-source amplifier** with a diode-connected active load.\n\nAround a bias point,\n\\[\nA_v \\approx -\\frac{g_{m2}}{g_{m1}+g_{o1}+g_{o2}}\n\\]\nand if output resistances are neglected,\n\\[\nA_v \\approx -\\frac{g_{m2}}{g_{m1}}\n\\]\nFor matched devices, this is about\n\\[\nA_v \\approx -1\n\\]\n\n---\n\n## 7) Final conclusion\nThe circuit is a **pMOS diode-load inverter / common-source amplifier**.\n\n### Key points:\n- It **inverts** the input.\n- \\(M_1\\) is a **diode-connected pMOS load**.\n- The DC output is found from **\\(I_{M_2}=I_{M_1}\\)**.\n- In the matched-device saturation region:\n  \\[\n  V_{out}=V_{DD}-V_{in}\n  \\]\n- It has **poor logic swing**:\n  - \\(V_{OH}<V_{DD}\\)\n  - \\(V_{OL}\\approx |V_T|\\)\n- It has **static power dissipation** when on.\n\nIf you want, I can also draw the **piecewise voltage-transfer characteristic** \\(V_{out}\\) vs. \\(V_{in}\\).",
        "format": "markdown",
        "sha256": "fdfa8129208ed281ac11fc6b829f76134fdaa63c6b04e56cfd92c4324453ae34"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies both devices as PMOS, recognizes M2 as the common-source input and M1 as a diode-connected PMOS load tied to ground, and gives the required gm/gm gain. The additional poor-pulldown/inverter framing does not replace or contradict that essential interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 21526,
        "total_tokens": 23204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 21526,
        "total_tokens": 23204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the devices are **pMOS**, both are in saturation, and \\(V_{DD},V_{b1},V_{b2}\\) are **AC grounds**:\n\n\\[\n\\boxed{R_{out}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nEquivalently,\n\n\\[\n\\boxed{R_{out}=r_{o2}+r_{o1}\\left(1+g_{m1}r_{o2}\\right)}\n\\]\n\nSo for large intrinsic gain \\((g_{m1}r_{o1}\\gg 1,\\ g_{m1}r_{o2}\\gg 1)\\),\n\n\\[\n\\boxed{R_{out}\\approx g_{m1}r_{o1}r_{o2}}\n\\]\n\n### Why \\(g_{m1}\\) appears\nThe upper transistor \\(M_2\\) has its **source and gate both at AC ground**, so its \\(g_m\\) does not contribute; it looks like just \\(r_{o2}\\) from node \\(X\\) to ground. The gain boosting comes from the lower transistor \\(M_1\\).\n\nIf body effect is included, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).",
        "format": "markdown",
        "sha256": "2422cc5f2a036d8eb6faeee54dfac92be37d8b568804897bcd8a765022bd9ea8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the devices as pMOS, assigns the cascode gain-boosting role to M1, and gives the correct output-resistance expression and approximation. Omitting body effect is allowed.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2669,
        "output_tokens": 10526,
        "total_tokens": 13195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10240,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2669,
        "output_tokens": 10526,
        "total_tokens": 13195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10240,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming both MOSFETs are in saturation, \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are AC grounds, and body effect is neglected:\n\n- \\(M_2\\) has its gate and source AC-grounded, so its \\(g_m\\) does not contribute in small signal.\n- Thus \\(M_2\\) looks like just \\(r_{o2}\\) from node \\(X\\) to AC ground.\n- Looking into the drain of \\(M_1\\), this becomes a source-degenerated MOS.\n\nSo the output resistance is\n\n\\[\nR_{out}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\n\\]\n\nor equivalently,\n\n\\[\nR_{out}=r_{o2}+r_{o1}(1+g_{m1}r_{o2})\n\\]\n\nIf \\(g_{m1}r_{o2}\\gg 1\\), then\n\n\\[\nR_{out}\\approx g_{m1}r_{o1}r_{o2}\n\\]\n\nand for matched devices \\((r_{o1}=r_{o2}=r_o)\\),\n\n\\[\nR_{out}\\approx g_{m1}r_o^2\n\\]\n\nIf you want, I can also show the full small-signal derivation step by step.",
        "format": "markdown",
        "sha256": "94175457a0973d239815c2563aecb92981e26e7cfdb0ef42411c5762c280da83"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly assigns the cascode contribution to M1 and gives the correct output-resistance expression and approximation. Neglecting body effect and not explicitly naming the PMOS devices are acceptable.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2669,
        "output_tokens": 8068,
        "total_tokens": 10737,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2669,
        "output_tokens": 8068,
        "total_tokens": 10737,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming both MOSFETs are in saturation, \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are AC grounds, and channel-length modulation is included via \\(r_{o1}, r_{o2}\\):\n\n### Result\n\\[\n\\boxed{R_{out}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nIf body effect of \\(M_1\\) is included, then:\n\n\\[\n\\boxed{R_{out}=r_{o1}+r_{o2}+(g_{m1}+g_{mb1})r_{o1}r_{o2}}\n\\]\n\n### Approximation for \\(g_m r_o \\gg 1\\)\n\\[\n\\boxed{R_{out}\\approx g_{m1}r_{o1}r_{o2}}\n\\]\nor with body effect,\n\\[\n\\boxed{R_{out}\\approx (g_{m1}+g_{mb1})r_{o1}r_{o2}}\n\\]\n\n### Why \\(g_{m1}\\) appears, not \\(g_{m2}\\)\nIn this PMOS stack, \\(M_2\\)'s source and gate are both at AC ground, so its \\(g_m\\) does not contribute to small-signal gain; it contributes mainly \\(r_{o2}\\). The cascode action comes from \\(M_1\\).\n\nIf the two devices are identical \\((r_{o1}=r_{o2}=r_o)\\), then:\n\\[\n\\boxed{R_{out}\\approx g_m r_o^2}\n\\]\n\nIf you want, I can also show the small-signal derivation step by step.",
        "format": "markdown",
        "sha256": "4552946e82384cb77267c73647c3ecfac44415485b54ae40c49b730608c92fce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS stack with M1 as the cascode device and gives the correct output-resistance expression and approximation; body effect is handled appropriately as optional.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2669,
        "output_tokens": 9491,
        "total_tokens": 12160,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9114,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2669,
        "output_tokens": 9491,
        "total_tokens": 12160,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9114,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "By giving \\(M_2\\) enough source-drain voltage to satisfy its saturation condition.\n\nAssuming the upper device \\(M_2\\) is a **pMOS** (as drawn, with source at \\(V_{DD}\\)):\n\n\\[\nV_{SD2} \\ge V_{SG2}-|V_{TP}|\n\\]\n\nFor \\(M_2\\),\n\n- source: \\(V_{S2}=V_{DD}\\)\n- gate: \\(V_{G2}=V_{b2}\\)\n- drain: \\(V_{D2}=X\\)\n\nSo:\n\n\\[\nV_{SD2}=V_{DD}-X\n\\]\n\\[\nV_{SG2}=V_{DD}-V_{b2}\n\\]\n\nThus saturation requires\n\n\\[\nV_{DD}-X \\ge (V_{DD}-V_{b2})-|V_{TP}|\n\\]\n\nwhich simplifies to\n\n\\[\n\\boxed{X \\le V_{b2}+|V_{TP}|}\n\\]\n\nSo the way to ensure \\(M_2\\) stays in saturation is:\n\n- choose \\(V_{b2}\\) for the desired current, and\n- bias \\(M_1\\) (through \\(V_{b1}\\)) so that node \\(X\\) stays below \\(V_{b2}+|V_{TP}|\\).\n\nConceptually, \\(M_1\\) acts as the cascode device and keeps node \\(X\\) nearly constant, which helps keep \\(M_2\\) in saturation.\n\nIf \\(X\\) rises above \\(V_{b2}+|V_{TP}|\\), then \\(M_2\\) leaves saturation and enters triode.\n\nIf you want, I can also derive the relation between \\(V_{b1}\\) and \\(V_{b2}\\) for matched devices.",
        "format": "markdown",
        "sha256": "58d80a66aadd35826fd7ab7f26bf89c05e42df6a7a5ed9f47025b7bbd1517865"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The PMOS saturation condition is correct, and the answer recognizes that M1’s bias can control node X. However, it omits the key relation between X and Vb1 and therefore does not state the resulting condition on Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 8945,
        "total_tokens": 11510,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8556,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 8945,
        "total_tokens": 11510,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8556,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_2\\) is the **upper PMOS** transistor as drawn, keep it in saturation by satisfying its PMOS saturation condition:\n\n\\[\nV_{SD2} \\ge V_{SG2} - |V_{TP}|\n\\]\n\nFor this circuit,\n\n- \\(V_{SD2} = V_{DD} - V_X\\)\n- \\(V_{SG2} = V_{DD} - V_{b2}\\)\n\nSo:\n\n\\[\nV_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{TP}|\n\\]\n\nwhich simplifies to\n\n\\[\n\\boxed{V_X \\le V_{b2} + |V_{TP}|}\n\\]\n\nEquivalently,\n\n\\[\n\\boxed{V_{DD} - V_X \\ge V_{OV2}}\n\\]\n\nwhere \\(V_{OV2} = V_{SG2} - |V_{TP}|\\) is the overdrive of \\(M_2\\).\n\n## Practical meaning\nYou must choose the bias \\(V_{b2}\\) so that node \\(X\\) stays low enough, i.e. at least one overdrive below \\(V_{DD}\\), so \\(M_2\\) has enough \\(V_{SD}\\) to remain saturated.\n\nIf \\(X\\) is set by \\(M_1\\), then \\(V_{b2}\\) is usually chosen accordingly. For matched devices carrying the same current, a common minimum-headroom choice is roughly:\n\n\\[\nV_{b2} \\approx V_{b1} + V_{OV1}\n\\]\n\nwith some margin added in practice.\n\nIf you want, I can also derive the condition for **both \\(M_1\\) and \\(M_2\\)** to stay in saturation and give the output compliance voltage.",
        "format": "markdown",
        "sha256": "84c17147d5f7df18aca69777febe76b85686b7324c6058a36e9817f8cbce9317"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the correct PMOS saturation condition and the bias relation Vb2 − Vb1 ≈ VOV1 (with margin), which is the equivalent condition when M1 sets X and the devices have matched thresholds.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2565,
        "output_tokens": 11553,
        "total_tokens": 14118,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11165,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2565,
        "output_tokens": 11553,
        "total_tokens": 14118,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11165,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_2\\) is the **upper PMOS** device (its source tied to \\(V_{DD}\\)):\n\n### Saturation condition for \\(M_2\\)\nA PMOS is in saturation if\n\n\\[\nV_{SD2} \\ge V_{SG2} - |V_{TP2}|\n\\]\n\nHere,\n\n- \\(V_{S2} = V_{DD}\\)\n- \\(V_{G2} = V_{b2}\\)\n- \\(V_{D2} = X\\)\n\nSo,\n\n\\[\nV_{SD2} = V_{DD} - V_X\n\\]\n\\[\nV_{SG2} = V_{DD} - V_{b2}\n\\]\n\nSubstitute into the saturation condition:\n\n\\[\nV_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{TP2}|\n\\]\n\nwhich gives\n\n\\[\n\\boxed{V_X \\le V_{b2} + |V_{TP2}|}\n\\]\n\nEquivalently,\n\n\\[\n\\boxed{V_{SD2} \\ge V_{OV2}}\n\\]\n\nwhere \\(V_{OV2}\\) is the overdrive of \\(M_2\\).\n\n---\n\n### How do we ensure this in the circuit?\nWe choose the bias \\(V_{b1}\\) of \\(M_1\\) so that the intermediate node \\(X\\) is held at a suitable voltage.  \nThat is the job of the cascode transistor \\(M_1\\): it keeps \\(X\\) nearly constant, so output variations at \\(R_{out}\\) do not push \\(M_2\\) out of saturation.\n\nSo the practical rule is:\n\n\\[\n\\boxed{\\text{Bias } M_1 \\text{ so that } X \\le V_{b2}+|V_{TP2}|}\n\\]\n\nUsually you set \\(X\\) just a little below this limit to maximize output swing while keeping \\(M_2\\) saturated.\n\n---\n\n### Also required\n\\(M_2\\) must be turned on:\n\n\\[\nV_{SG2} = V_{DD} - V_{b2} > |V_{TP2}|\n\\]\n\n---\n\nIf you want, I can also derive the approximate relation between \\(V_{b1}\\) and \\(V_{b2}\\) that guarantees this.",
        "format": "markdown",
        "sha256": "f8aa3dc0a121c7d21b8d8f3cee4c59ec34d3d8644f994fa748de044703444200"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies M2 as PMOS and gives its saturation condition, and qualitatively says to adjust Vb1 to set X. It omits the key relation VX = Vb1 + |VGS1| or an explicit resulting condition on Vb1, so it does not earn full credit.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2565,
        "output_tokens": 8768,
        "total_tokens": 11333,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8266,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2565,
        "output_tokens": 8768,
        "total_tokens": 11333,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8266,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **cascode NMOS stage**:\n\n- \\(M_1\\): common-source input transistor  \n- \\(M_2\\): common-gate cascode transistor, biased by \\(V_{b1}\\)  \n- \\(I_1\\): load/bias current source  \n- output at the drain of \\(M_2\\)\n\n## 1) DC bias\n\nAssume both MOSFETs are in saturation and ignore body effect first.\n\nSince the devices are in series,\n\n\\[\nI_{D1}=I_{D2}=I_1\n\\]\n\nSo the overdrives are set by \\(I_1\\):\n\n\\[\nV_{OV1}=\\sqrt{\\frac{2I_1}{\\beta_1}}, \\qquad\nV_{OV2}=\\sqrt{\\frac{2I_1}{\\beta_2}}\n\\]\n\nHence the required gate/input bias for \\(M_1\\) is\n\n\\[\nV_{in,Q}=V_{TH1}+V_{OV1}\n\\]\n\nand node \\(X\\) is approximately\n\n\\[\nV_X = V_{b1}-V_{TH2}-V_{OV2}\n\\]\n\n### Saturation conditions\n\nFor \\(M_1\\):\n\n\\[\nV_X \\ge V_{OV1}\n\\]\n\nFor \\(M_2\\):\n\n\\[\nV_{out}-V_X \\ge V_{OV2}\n\\]\n\nSo the minimum output voltage to keep \\(M_2\\) saturated is\n\n\\[\nV_{out,\\min}=V_X+V_{OV2}=V_{b1}-V_{TH2}\n\\]\n\nIf \\(V_{b1}\\) is chosen for maximum swing, usually\n\n\\[\nV_X \\approx V_{OV1}\n\\]\n\nwhich gives\n\n\\[\nV_{b1}\\approx V_{TH2}+V_{OV1}+V_{OV2}\n\\]\n\nand then\n\n\\[\nV_{out,\\min}\\approx V_{OV1}+V_{OV2}\n\\]\n\nUpper swing is limited by the top current-source compliance; if \\(I_1\\) is ideal, \\(V_{out}\\) can rise close to \\(V_{DD}\\).\n\n---\n\n## 2) Small-signal behavior\n\nFor AC, an ideal current source is an **open circuit**, so the gain is set by the transistor small-signal output resistances.\n\nLet \\(r_{o1}, r_{o2}\\) be the output resistances, and \\(g_{m1}, g_{m2}\\) the transconductances.\n\n### Open-circuit voltage gain\n\nThe small-signal gain is\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n=\n-g_{m1}r_{o1}\\left(1+g_{m2}r_{o2}\\right)\n\\]\n\nIf \\(g_{m2}r_{o2}\\gg 1\\),\n\n\\[\nA_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n\\]\n\nSo it is a **high-gain inverting amplifier**.\n\n### Output resistance\n\nLooking into the output,\n\n\\[\nR_{out}=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n\\]\n\nFor strong cascode action,\n\n\\[\nR_{out}\\approx g_{m2}r_{o1}r_{o2}\n\\]\n\nThis large \\(R_{out}\\) is the main reason the gain is high.\n\n### Input resistance\n\nSince the input is at a MOS gate,\n\n\\[\nR_{in}\\approx \\infty\n\\]\n\n---\n\n## 3) What \\(M_2\\) is doing\n\n\\(M_2\\) is the **cascode device**. Its role is to:\n\n- keep the drain of \\(M_1\\) (node \\(X\\)) from following large changes at \\(V_{out}\\)\n- reduce the effect of \\(V_{out}\\) on \\(M_1\\)\n- greatly increase output resistance\n- therefore increase gain\n\nTradeoff: you get **higher gain**, but you lose **output swing/headroom** because \\(M_2\\) needs voltage across it to stay in saturation.\n\n---\n\n## 4) Important ideal-model note\n\nIf you use the **ideal square-law model with no channel-length modulation** (\\(r_{o1}, r_{o2}\\to \\infty\\)) and an ideal current source \\(I_1\\), then the small-signal gain becomes formally infinite / undefined. In practice, finite \\(r_o\\) (or a non-ideal load) makes the gain finite.\n\n---\n\n## Final summary\n\nThis circuit is a **cascode common-source amplifier** with an ideal current-source load.\n\nKey results:\n\n\\[\nV_{in,Q}=V_{TH1}+V_{OV1}\n\\]\n\n\\[\nV_X = V_{b1}-V_{TH2}-V_{OV2}\n\\]\n\n\\[\nV_{out,\\min}\\approx V_{OV1}+V_{OV2}\n\\quad \\text{(with optimal bias)}\n\\]\n\n\\[\nA_v = -g_{m1}r_{o1}(1+g_{m2}r_{o2})\n\\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n\\]\n\n\\[\nR_{out}=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n\\]\n\nIf you want, I can also derive the gain step-by-step from the small-signal equivalent circuit.",
        "format": "markdown",
        "sha256": "124dc83ea53fd673c491b4290269eae01fefe85b7c390182baf68718f2f36e2a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source input NMOS and M2 as the common-gate NMOS cascode, and gives the ideal-load gain expression with body effect omitted, as allowed by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 22429,
        "total_tokens": 23731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 22429,
        "total_tokens": 23731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **cascode NMOS gain stage**:\n\n- \\(M_1\\): common-source input transistor\n- \\(M_2\\): common-gate cascode transistor, biased by \\(V_{b1}\\)\n- \\(I_1\\): current-source load\n- output at the drain of \\(M_2\\)\n\n## 1) DC operation\n\nAssume both MOSFETs are in saturation.\n\nBecause the devices are stacked, the branch current is\n\n\\[\nI_{D1}=I_{D2}=I_1\n\\]\n\nSo the overdrives are set by \\(I_1\\):\n\n\\[\nV_{OV1}=\\sqrt{\\frac{2I_1}{\\beta_1}}, \\qquad\nV_{OV2}=\\sqrt{\\frac{2I_1}{\\beta_2}}\n\\]\n\nwith \\(\\beta_i=\\mu_n C_{ox}(W/L)_i\\).\n\n### Bias voltages\nFor \\(M_1\\):\n\\[\nV_{IN,Q} \\approx V_{TH1}+V_{OV1}\n\\]\n\nFor \\(M_2\\):\n\\[\nV_X = V_{b1}-V_{GS2}\n\\approx V_{b1}-(V_{TH2}+V_{OV2})\n\\]\n\nSo \\(V_{b1}\\) sets node \\(X\\).\n\n## 2) Saturation conditions / output swing\n\nTo keep both transistors in saturation:\n\n### \\(M_1\\):\n\\[\nV_X \\ge V_{OV1}\n\\]\n\n### \\(M_2\\):\n\\[\nV_{out}-V_X \\ge V_{OV2}\n\\]\n\nHence\n\n\\[\nV_{out,\\min}=V_X+V_{OV2}\n\\]\n\nIf you choose the usual optimum bias \\(V_X \\approx V_{OV1}\\), then\n\n\\[\nV_{out,\\min} \\approx V_{OV1}+V_{OV2}\n\\]\n\nSo the **cascode improves gain but costs headroom**.\n\nThe upper swing limit is set by the compliance of the current source \\(I_1\\) (or by its PMOS implementation in practice).\n\n---\n\n## 3) Small-signal interpretation\n\n- \\(M_1\\) converts \\(v_{in}\\) into a current: roughly \\(g_{m1}v_{in}\\)\n- \\(M_2\\) is a common-gate device that greatly increases the output resistance\n\nSo the stage is an **inverting high-gain amplifier**.\n\n---\n\n## 4) Small-signal gain\n\nLet \\(g_{mi}\\) and \\(r_{oi}\\) be the transconductance and output resistance of \\(M_i\\).  \nTreat \\(V_{b1}\\) as AC ground, and the ideal current source \\(I_1\\) as an open circuit for small signal.\n\nThen the voltage gain is\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n=\n-g_{m1}r_{o1}\\left(1+g_{m2}r_{o2}\\right)\n\\]\n\nIf \\(g_m r_o \\gg 1\\),\n\n\\[\nA_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n\\]\n\nSo the gain is much larger than that of a simple common-source stage.\n\nIf body effect of \\(M_2\\) matters, replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\).\n\n---\n\n## 5) Output resistance\n\nThe cascode output resistance is\n\n\\[\nR_{out} \\approx r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n\\]\n\nand for \\(g_{m2}r_{o2}\\gg1\\),\n\n\\[\nR_{out} \\approx g_{m2}r_{o1}r_{o2}\n\\]\n\nThis is the main reason cascodes are used: **very large output resistance**, hence large gain.\n\nIf the current source \\(I_1\\) has finite small-signal resistance \\(r_{oI}\\), then the total output resistance becomes\n\n\\[\nR_{out,\\text{total}} = R_{out}\\parallel r_{oI}\n\\]\n\n---\n\n## 6) Key cascode property\n\n\\(M_2\\) isolates node \\(X\\) from the output.  \nA change at the output appears only weakly at \\(X\\):\n\n\\[\n\\frac{v_X}{v_{out}} \\approx \\frac{1}{1+g_{m2}r_{o2}}\n\\]\n\nSo the drain of \\(M_1\\) is kept relatively constant, which:\n\n- reduces channel-length modulation in \\(M_1\\)\n- increases output resistance\n- reduces Miller effect on \\(M_1\\)\n\n---\n\n## Final summary\n\nThis circuit is a **cascode common-source amplifier**.\n\n### Main results:\n- **Current:** \\(I_{D1}=I_{D2}=I_1\\)\n- **Bias at node \\(X\\):**\n  \\[\n  V_X \\approx V_{b1}-(V_{TH2}+V_{OV2})\n  \\]\n- **Minimum output voltage for saturation:**\n  \\[\n  V_{out,\\min}\\approx V_{OV1}+V_{OV2}\n  \\]\n- **Voltage gain:**\n  \\[\n  A_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n  \\]\n- **Output resistance:**\n  \\[\n  R_{out} \\approx g_{m2}r_{o1}r_{o2}\n  \\]\n\nSo: **high gain, high output resistance, but reduced output swing**.\n\nIf you want, I can also draw the small-signal equivalent and derive the gain step by step.",
        "format": "markdown",
        "sha256": "fbbb554189b90bdca969a95b2ad757c18fa1ce007d97bcffb417141093eaf118"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain with body effect optionally included. Minor simplifications do not affect the central result.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 26112,
        "total_tokens": 27414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24862,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 26112,
        "total_tokens": 27414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24862,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **cascode common-source amplifier**.\n\n- **\\(M_1\\)** is the input **common-source** transistor.\n- **\\(M_2\\)** is the **common-gate (cascode)** transistor biased by \\(V_{b1}\\).\n- **\\(I_1\\)** is the load/bias current source.\n- Output is taken at the drain of \\(M_2\\).\n\n---\n\n## 1) DC operation\n\nSince the devices are in series,\n\n\\[\nI_{D1}=I_{D2}=I_1\n\\]\n\nSo the quiescent current is fixed by \\(I_1\\).\n\n### Bias of \\(M_1\\)\nFor \\(M_1\\) in saturation,\n\n\\[\nV_{GS1}=V_{in,Q}, \\qquad\nI_1 \\approx \\frac12 \\beta_1 V_{OV1}^2\n\\]\n\nso\n\n\\[\nV_{OV1}=\\sqrt{\\frac{2I_1}{\\beta_1}}, \\qquad\nV_{in,Q}\\approx V_{TH1}+V_{OV1}\n\\]\n\n### Bias of \\(M_2\\)\n\\(M_2\\) gate is fixed at \\(V_{b1}\\), so node \\(X\\) is approximately\n\n\\[\nV_X \\approx V_{b1}-V_{GS2}\n\\approx V_{b1}-V_{TH2}-V_{OV2}\n\\]\n\nwith\n\n\\[\nV_{OV2}=\\sqrt{\\frac{2I_1}{\\beta_2}}\n\\]\n\nThus \\(V_{b1}\\) is chosen to keep \\(M_1\\) in saturation:\n\n\\[\nV_X \\ge V_{OV1}\n\\]\n\nA common choice is to set \\(V_X\\) just a little above \\(V_{OV1}\\), which maximizes output swing.\n\n---\n\n## 2) Saturation conditions / output swing\n\nFor both NMOS devices to remain in saturation:\n\n### \\(M_1\\):\n\\[\nV_{DS1}=V_X \\ge V_{OV1}\n\\]\n\n### \\(M_2\\):\n\\[\nV_{DS2}=V_{out}-V_X \\ge V_{OV2}\n\\]\n\nSo the minimum output voltage is\n\n\\[\nV_{out,\\min} \\approx V_X + V_{OV2}\n\\]\n\nIf \\(V_X\\) is chosen near \\(V_{OV1}\\), then\n\n\\[\nV_{out,\\min} \\approx V_{OV1}+V_{OV2}\n\\]\n\nThis shows the usual **cascode tradeoff**:\n\n- **higher gain**\n- **less output swing** because two transistors are stacked\n\nUpper swing is limited by the compliance of the current source \\(I_1\\). If \\(I_1\\) is ideal, the upper limit is ideally near \\(V_{DD}\\).\n\n---\n\n## 3) Small-signal behavior\n\nAssume:\n\n- both transistors are in saturation,\n- body effect ignored for now,\n- \\(I_1\\) is an ideal current source, so it is **open** in small signal.\n\nLet\n\n\\[\ng_{o1}=\\frac1{r_{o1}},\\qquad g_{o2}=\\frac1{r_{o2}}\n\\]\n\nwith small-signal node voltages \\(v_x\\) and \\(v_o=v_{out}\\).\n\n### Key idea\n\\(M_1\\) converts input voltage into current:\n\n\\[\ni_d \\approx g_{m1} v_{in}\n\\]\n\n\\(M_2\\) acts as a cascode device, making the output resistance very large.\n\n---\n\n## 4) Output resistance\n\nSet \\(v_{in}=0\\) and look into the output node. The result is\n\n\\[\nR_{out}=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n\\]\n\nand if \\(g_{m2}r_{o2}\\gg 1\\),\n\n\\[\nR_{out}\\approx g_{m2}r_{o1}r_{o2}\n\\]\n\nThis is the main benefit of the cascode: **very large output resistance**.\n\nIf body effect of \\(M_2\\) matters, replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\).\n\n---\n\n## 5) Voltage gain\n\nWith the ideal current source load, the intrinsic small-signal gain is\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n= -g_{m1}r_{o1}\\bigl(1+g_{m2}r_{o2}\\bigr)\n\\]\n\nFor \\(g_{m2}r_{o2}\\gg 1\\),\n\n\\[\nA_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n\\]\n\nSo:\n\n- gain is **negative** → the stage is **inverting**\n- gain is much larger than a simple common-source stage\n\nAgain, with body effect included:\n\n\\[\nA_v \\approx -g_{m1}(g_{m2}+g_{mb2})r_{o1}r_{o2}\n\\]\n\n---\n\n## 6) Why the cascode helps\n\nThe cascode transistor \\(M_2\\):\n\n1. **keeps node \\(X\\) relatively insensitive to output swings**\n2. **reduces the variation of \\(V_{DS1}\\)** on \\(M_1\\)\n3. **increases output resistance**\n4. therefore **increases voltage gain**\n\nA useful relation for output disturbances is\n\n\\[\n\\frac{v_x}{v_{out}}\n\\approx \\frac{1}{g_{m2}r_{o2}}\n\\]\n\nwhen \\(g_{m2}r_{o2}\\) is large. So output variations are only weakly transferred to node \\(X\\).\n\n---\n\n## 7) Input resistance\n\nSince the input is applied to a MOS gate,\n\n\\[\nR_{in} \\approx \\infty\n\\]\n\n(ignoring leakage and capacitances).\n\n---\n\n## 8) Practical note\n\nIf the current source \\(I_1\\) is not ideal, its finite output resistance appears in parallel with the cascode output resistance and reduces the gain.\n\nSo in practice,\n\n\\[\nR_{out,\\text{total}} \\approx R_{out} \\parallel r_{o,I_1}\n\\]\n\nand the gain is correspondingly smaller.\n\n---\n\n## Final summary\n\nThis circuit is a **cascode gain stage**.\n\n### Main results\n- **DC current:**  \n  \\[\n  I_{D1}=I_{D2}=I_1\n  \\]\n\n- **Output resistance:**  \n  \\[\n  R_{out}=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n  \\approx g_{m2}r_{o1}r_{o2}\n  \\]\n\n- **Voltage gain:**  \n  \\[\n  A_v=-g_{m1}r_{o1}(1+g_{m2}r_{o2})\n  \\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n  \\]\n\n- **Minimum output for saturation:**  \n  \\[\n  V_{out,\\min}\\approx V_{OV1}+V_{OV2}\n  \\]\n\nSo the stage provides **high gain** and **high output resistance**, at the cost of **reduced voltage headroom**.\n\nIf you want, I can also derive the gain step-by-step from the small-signal equivalent circuit.",
        "format": "markdown",
        "sha256": "1a3ad2044f5d808c5257945f64abb307d2cac5de16f10e2680b622165feca176"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression with body effect omitted as permitted by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 18717,
        "total_tokens": 20019,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 18717,
        "total_tokens": 20019,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes.\n\nMore precisely, it is a **MOS cascode stage**: a **common-source transistor** \\(M_1\\) cascoded by a **common-gate transistor** \\(M_2\\).\n\nWhy it qualifies:\n- **\\(M_1\\)** gets the input at its gate \\(\\rightarrow\\) common-source device.\n- **\\(M_2\\)** has its gate fixed at a bias voltage \\(V_{b1}\\) \\(\\rightarrow\\) common-gate device.\n- The two transistors are **stacked in series**, and the output is taken at the drain of the upper device.\n\nThis is the classic cascode arrangement, here with a **resistive load \\(R_D\\)** to \\(V_{DD}\\).\n\nTypical purpose of the cascode:\n- increase output resistance\n- improve gain\n- reduce Miller effect on \\(M_1\\)\n- keep the drain voltage of \\(M_1\\) relatively constant\n\nSo the circuit is a **resistor-loaded NMOS cascode amplifier**, assuming both transistors are properly biased in saturation.",
        "format": "markdown",
        "sha256": "182219b4f3e5b83370eaeff8f45fbac1fbf0ea5be1b042b81ff7722b2f9bdb3b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is not a cascode: M1 is a PMOS source follower with its drain grounded, not a common-source input device. The answer misidentifies M1 and concludes the opposite of the essential result.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 745,
        "total_tokens": 2121,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 745,
        "total_tokens": 2121,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — this is a **cascode amplifier**.\n\n### Why it is a cascode\nA MOS cascode is typically:\n\n- a **common-source** transistor at the bottom: **M1**\n- stacked with a **common-gate** transistor on top: **M2**\n- where the upper transistor’s gate is biased by a fixed voltage: **\\(V_{b1}\\)**\n\nThat matches your circuit:\n\n- **M1**: input applied at gate \\(\\rightarrow\\) common-source stage\n- **M2**: gate held at fixed bias \\(\\rightarrow\\) common-gate stage\n- **Drain of M1 connected to source of M2** \\(\\rightarrow\\) stacked “cascode” connection\n- **Output taken at drain of M2** \\(\\rightarrow\\) standard cascode output node\n\n### What the resistor means\nThe resistor \\(R_D\\) is just the **load**.  \nSo this is specifically a:\n\n- **resistively loaded NMOS cascode amplifier**\n\n### Main purpose of the cascode here\nM2 helps keep the drain voltage of M1 relatively constant, which:\n\n- increases output resistance\n- increases gain\n- reduces Miller effect on M1\n- improves high-frequency performance\n\n### Important note\nIt is a cascode **when biased properly**, usually with both MOSFETs operating in saturation.\n\nIf you want, I can also explain **how to verify the saturation conditions** for \\(M_1\\) and \\(M_2\\) in this circuit.",
        "format": "markdown",
        "sha256": "a20470be165c2858abf498fe8e6f3515864e9879d4f3abbcb196c3712a4b378e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Incorrectly calls the circuit a cascode. M1 is a PMOS source follower with its drain grounded, not a common-source device, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 839,
        "total_tokens": 2215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 839,
        "total_tokens": 2215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — this is a **cascode structure**, specifically a **common-source / common-gate NMOS cascode amplifier** with a resistive load.\n\n### Why it is a cascode\n- **M1** is the **input transistor**:\n  - source at ground\n  - input applied to its gate \\(V_{in}\\)\n  - so M1 is in **common-source** configuration\n\n- **M2** is the **cascode transistor**:\n  - its gate is biased by a fixed voltage \\(V_{b1}\\)\n  - its source is driven by M1’s drain current\n  - its drain goes to the output node\n  - so M2 is in **common-gate** configuration for small signals\n\nThat common-source stage feeding a common-gate stage is exactly the classic **cascode** arrangement.\n\n### Role of \\(R_D\\)\n\\(R_D\\) is just the **load resistor** connected to \\(V_{DD}\\). It does not change the fact that the transistor pair \\(M_1\\)-\\(M_2\\) forms a cascode.\n\n### Typical benefits of this cascode\n- higher output resistance\n- higher voltage gain\n- reduced Miller effect on \\(M_1\\)\n- better isolation between input and output\n\nSo the short answer is:\n\n**Yes, it is a cascode amplifier (NMOS cascode with resistive load).**",
        "format": "markdown",
        "sha256": "5840515014423d483960d7ca51f3ef065fa6d8906dceabcb401d4daf18a87725"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower with its drain grounded, not a common-source stage, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 813,
        "total_tokens": 2189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 813,
        "total_tokens": 2189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is weaker in a **cascode** because the capacitor that normally causes it—\\(C_{gd}\\) in a MOSFET or \\(C_{cb}\\) in a BJT—does **not see the full voltage gain**.\n\n### Why Miller effect happens\nFor a capacitance \\(C_f\\) between input and output,\n\n\\[\nC_{\\text{in,eq}} \\approx C_f(1 - A_v)\n\\]\n\nSo in a simple common-source/common-emitter stage, where \\(A_v\\) is large and negative, that capacitance looks much bigger at the input:\n\n\\[\nC_{\\text{in,eq}} \\approx C_f(1+|A_v|)\n\\]\n\nThat is the Miller effect.\n\n### What changes in a cascode\nIn a cascode, the lower transistor is the input device, and the upper common-gate/common-base transistor **shields** its drain/collector from large output swings.\n\n- The **output** can still swing a lot.\n- But the **drain/collector of the input transistor** moves only a little.\n\nSo the capacitance \\(C_{gd}\\) or \\(C_{cb}\\) of the input transistor is connected between:\n- the input, and\n- a node with only a small AC swing,\n\nrather than between the input and the full output swing.\n\nThat means the gain across that capacitance is **small**, not the large overall gain of the amplifier. Therefore it is **not multiplied much**.\n\n### Intuition\nA cascode keeps the input transistor’s drain/collector at an almost constant AC voltage, so there is much less feedback from output to input through the parasitic capacitance. Less feedback capacitance means:\n- smaller effective input capacitance,\n- less Miller effect,\n- higher bandwidth.\n\n### Short version\nA cascode reduces Miller effect because the upper transistor isolates the input transistor from the output, so the input transistor’s \\(C_{gd}\\)/\\(C_{cb}\\) does not experience the large voltage gain that causes Miller multiplication.",
        "format": "markdown",
        "sha256": "987d9acec0433852ada86fdfe9abe9a4fe4b7ea0325edfa534ebc5efd188321c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the input transistor’s drain swings much less than the output, reducing Miller multiplication. Calling the node almost constant overstates the reduction, but the golden solution treats that as a minor flaw.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 5946,
        "total_tokens": 5965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5519,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 5946,
        "total_tokens": 5965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5519,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is smaller in a cascode because the **input transistor no longer has a large voltage gain from its input to its drain/collector**.\n\nIn a single common-source/common-emitter stage, the parasitic capacitance \\(C_{gd}\\) or \\(C_{bc}\\) connects the input node to the output node. Since the output swings with a **large inverted gain**, that capacitance looks much bigger at the input:\n\n\\[\nC_{\\text{eq}} \\approx C(1 - A_v)\n\\]\n\nIf \\(A_v\\) is large and negative, the capacitance gets multiplied a lot.\n\nIn a **cascode**:\n\n- the lower transistor is the input device,\n- the upper transistor is common-gate/common-base,\n- the upper transistor keeps the lower transistor’s drain/collector at a **low-impedance, small-swing node**.\n\nSo the capacitance \\(C_{gd}\\)/\\(C_{bc}\\) of the **lower transistor** does **not** see the full output swing. The gain across that capacitance is only small, often around 0 to \\(-1\\), not \\(-50\\) or \\(-100\\).\n\nThat means its effective input capacitance is only slightly increased, e.g. roughly:\n\n\\[\nC_{\\text{in}} \\approx C_{gs} + C_{gd}(1 - A_{x})\n\\]\n\nwith \\(A_x\\) small, instead of using the full stage gain.\n\nSo the key idea is:\n\n**A cascode moves the large voltage swing away from the input transistor, so the parasitic input-to-output capacitance is not Miller-multiplied nearly as much.**\n\nResult: **lower effective input capacitance and higher bandwidth.**",
        "format": "markdown",
        "sha256": "f7fd49eab92e259f4678d0e510f5f8724a3742894aa11d17490ece4437bd65dc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance, small-swing node at the lower transistor’s drain as the reason Miller multiplication is reduced. It somewhat overstates the reduction by suggesting the gain may be near zero and the capacitance only slightly increases, but the central explanation is correct and this is a minor flaw.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 5025,
        "total_tokens": 5044,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 5025,
        "total_tokens": 5044,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is weaker in a **cascode** because the transistor that receives the input does **not see a large voltage swing at its output node**.\n\n### In a single common-source/common-emitter stage\nThere is a capacitance between input and output:\n- MOSFET: \\(C_{gd}\\)\n- BJT: \\(C_{bc}\\)\n\nSince the stage has large voltage gain, the output swings a lot relative to the input. That makes this small capacitance look much larger at the input:\n\n\\[\nC_{\\text{in,eff}} \\approx C_{gd}(1 - A_v)\n\\]\n\nFor an inverting gain stage, \\(A_v\\) is negative, so this becomes roughly:\n\n\\[\nC_{\\text{in,eff}} \\approx C_{gd}(1 + |A_v|)\n\\]\n\nThis is the Miller multiplication.\n\n---\n\n### In a cascode\nIn a cascode, the lower transistor is the input device, and the upper transistor holds the lower transistor’s drain/collector at **almost constant AC voltage**.\n\nSo for the lower device:\n- the voltage at its output node changes very little\n- therefore the voltage across \\(C_{gd}\\) or \\(C_{bc}\\) changes very little\n- so there is much less feedback from output back to input\n- thus the capacitance is **not multiplied much**\n\nIn other words, the gain from the lower transistor’s input to its drain/collector is small, so the Miller factor is close to 1 instead of \\(1+|A_v|\\).\n\n---\n\n### Intuition\nA cascode “shields” the input transistor from the large output swing.\n\n- **Without cascode:** input transistor’s output node swings a lot → strong Miller effect\n- **With cascode:** input transistor’s output node is nearly fixed → weak Miller effect\n\n---\n\n### Result\nBecause the Miller effect is reduced, a cascode has:\n- lower effective input capacitance\n- less input-output feedback\n- higher bandwidth / better high-frequency performance\n\nIf you want, I can also show this with a small-signal diagram or derive the Miller factor for a MOS cascode.",
        "format": "markdown",
        "sha256": "0934a7dab9e3b3a7ffc9657b230b8a6a2825cbf70ce68bdfed90ab7b511e6f7d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that the cascode keeps the input transistor’s drain swing smaller, reducing Miller multiplication. However, it overstates the clamping: the drain gain is roughly −1, so the Cgd Miller factor is about 2, not close to 1.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 965,
        "total_tokens": 984,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 965,
        "total_tokens": 984,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the lower device \\(M_2\\) is an **NMOS** with\n\n- gate at \\(V_{b1}\\),\n- source at \\(V_{in}\\),\n- drain at \\(V_{out}\\),\n\nand the upper device \\(M_1\\) is a **PMOS** with\n\n- source at \\(V_{DD}\\),\n- gate at \\(V_{b2}\\),\n- drain at \\(V_{out}\\),\n\nthen the circuit is a:\n\n## **common-gate NMOS amplifier with a PMOS active load**\n\n---\n\n## 1) What each transistor does\n\n- **\\(M_1\\)** acts like a biased PMOS current source/load.\n- **\\(M_2\\)** is the amplifying device in **common-gate** configuration:\n  - gate fixed at \\(V_{b1}\\)\n  - input applied at the source\n  - output taken at the drain\n\nSo this stage has **positive voltage gain** (non-inverting).\n\n---\n\n## 2) DC bias conditions\n\n### For \\(M_1\\) (PMOS)\n\\[\nV_{SG1}=V_{DD}-V_{b2}\n\\]\nTo turn it on:\n\\[\nV_{DD}-V_{b2} > |V_{TP}|\n\\]\n\nIf in saturation,\n\\[\nI_{D1}\\approx \\frac{1}{2}\\beta_p\\left(V_{DD}-V_{b2}-|V_{TP}|\\right)^2\n\\]\n\n---\n\n### For \\(M_2\\) (NMOS)\n\\[\nV_{GS2}=V_{b1}-V_{in}\n\\]\nTo turn it on:\n\\[\nV_{b1}-V_{in} > V_{TN}\n\\]\n\nIf in saturation,\n\\[\nI_{D2}\\approx \\frac{1}{2}\\beta_n\\left(V_{b1}-V_{in}-V_{TN}\\right)^2\n\\]\n\nAt the operating point,\n\\[\nI_{D1}=I_{D2}\n\\]\n\nSo \\(V_{b1}\\), \\(V_{b2}\\), and the DC value of \\(V_{in}\\) must be chosen so the two drain currents match.\n\n---\n\n## 3) Saturation limits / output swing\n\nFor \\(M_2\\) to remain saturated:\n\\[\nV_{DS2} \\ge V_{GS2}-V_{TN}\n\\]\n\\[\nV_{out}-V_{in} \\ge V_{b1}-V_{in}-V_{TN}\n\\]\n\\[\n\\boxed{V_{out} \\ge V_{b1}-V_{TN}}\n\\]\n\nFor \\(M_1\\) to remain saturated:\n\\[\nV_{SD1} \\ge V_{SG1}-|V_{TP}|\n\\]\n\\[\nV_{DD}-V_{out} \\ge V_{DD}-V_{b2}-|V_{TP}|\n\\]\n\\[\n\\boxed{V_{out} \\le V_{b2}+|V_{TP}|}\n\\]\n\nSo the output should stay in\n\n\\[\n\\boxed{V_{b1}-V_{TN} \\;\\le\\; V_{out} \\;\\le\\; V_{b2}+|V_{TP}|}\n\\]\n\nfor both transistors to stay saturated.\n\n---\n\n## 4) Small-signal behavior\n\nAt small signal:\n\n- \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are AC grounds.\n- \\(M_1\\) contributes mainly its output resistance \\(r_{o1}\\).\n- \\(M_2\\) converts the source-input signal into a drain-current change.\n\nBecause the input is at the **source** of \\(M_2\\),\n\n\\[\n\\Delta i_{d2} \\approx -(g_{m2}+g_{mb2})\\,\\Delta v_{in}\n\\]\n\nThat current variation through the output resistance gives:\n\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}} \\approx +(g_{m2}+g_{mb2})(r_{o1}\\parallel r_{o2})}\n\\]\n\nIf body effect is neglected:\n\n\\[\n\\boxed{A_v \\approx +g_{m2}(r_{o1}\\parallel r_{o2})}\n\\]\n\n### Important result:\n- **Gain is positive**\n- so the stage is **non-inverting**\n\n---\n\n## 5) Intuition: what happens when \\(V_{in}\\) increases?\n\nIf \\(V_{in}\\) goes up:\n\n- \\(V_{GS2}=V_{b1}-V_{in}\\) goes down\n- \\(M_2\\) current decreases\n- the PMOS load \\(M_1\\) still tries to supply current\n- so \\(V_{out}\\) rises\n\nSo:\n\n\\[\n\\boxed{V_{in}\\uparrow \\;\\Rightarrow\\; V_{out}\\uparrow}\n\\]\n\nLikewise,\n\n\\[\n\\boxed{V_{in}\\downarrow \\;\\Rightarrow\\; V_{out}\\downarrow}\n\\]\n\n---\n\n## 6) Input and output resistance\n\n- **Output resistance**\n  \\[\n  \\boxed{R_{out}\\approx r_{o1}\\parallel r_{o2}}\n  \\]\n\n- **Input resistance**\n  \n  Since this is a common-gate input, it is typically low, on the order of\n  \\[\n  \\boxed{R_{in}\\sim \\frac{1}{g_{m2}+g_{mb2}}}\n  \\]\n  when the drain sees a finite AC load.\n\n---\n\n## 7) One subtle point\n\nIf you use the **ideal long-channel model** with no channel-length modulation (\\(\\lambda=0\\)), both transistors behave like ideal current sources in saturation, and the DC value of \\(V_{out}\\) is not uniquely fixed. In practice, finite \\(r_o\\) (or an external load) sets the operating point.\n\n---\n\n## Final summary\n\nThis circuit is a:\n\n\\[\n\\boxed{\\text{common-gate NMOS amplifier with PMOS current-source load}}\n\\]\n\nwith:\n\n- **positive voltage gain**\n- **high output resistance**\n- **low-to-moderate input resistance**\n- bias/output swing set by \\(V_{b1}\\), \\(V_{b2}\\), and the saturation limits\n\nApproximate voltage gain:\n\n\\[\n\\boxed{A_v \\approx +g_{m2}(r_{o1}\\parallel r_{o2})}\n\\]\n\nIf you want, I can also draw the **small-signal equivalent circuit** and derive the gain step by step.",
        "format": "markdown",
        "sha256": "3873e25ee446b009c4e8c73931e721bfce371c8177274c3cc78da8a0d8342b51"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places Vin at M2’s source, describes the non-inverting gain and low input resistance, and gives the accepted gain approximation. The extra Rin approximation is permitted by the full-credit rule.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 21025,
        "total_tokens": 22249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19619,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 21025,
        "total_tokens": 22249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19619,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is a PMOS and \\(M_2\\) is an NMOS, this is a **common-gate amplifier** with an **active PMOS load**.\n\n- \\(M_2\\): gate fixed at \\(V_{b1}\\), input applied to its source \\(\\Rightarrow\\) common-gate device  \n- \\(M_1\\): biased by \\(V_{b2}\\), provides a pull-up/current-source load from \\(V_{DD}\\)\n\n## 1) DC operation\n\nIf both transistors are in saturation,\n\n\\[\nI_{D1} \\approx \\frac{1}{2}k_p\\left(V_{DD}-V_{b2}-|V_{TP}|\\right)^2\n\\]\n\n\\[\nI_{D2} \\approx \\frac{1}{2}k_n\\left(V_{b1}-V_{in}-V_{TN}\\right)^2\n\\]\n\nand at the bias point,\n\n\\[\nI_{D1}=I_{D2}.\n\\]\n\n### Saturation conditions\nFor \\(M_2\\) (NMOS):\n- on if\n\\[\nV_{b1}-V_{in} > V_{TN}\n\\]\n- saturation if\n\\[\nV_{out}-V_{in} \\ge (V_{b1}-V_{in})-V_{TN}\n\\]\nso\n\\[\nV_{out} \\ge V_{b1}-V_{TN}\n\\]\n\nFor \\(M_1\\) (PMOS):\n- on if\n\\[\nV_{DD}-V_{b2} > |V_{TP}|\n\\]\n- saturation if\n\\[\nV_{DD}-V_{out} \\ge (V_{DD}-V_{b2})-|V_{TP}|\n\\]\nso\n\\[\nV_{out} \\le V_{b2}+|V_{TP}|\n\\]\n\nHence, for both devices to remain saturated,\n\n\\[\n\\boxed{V_{b1}-V_{TN} \\;\\le\\; V_{out} \\;\\le\\; V_{b2}+|V_{TP}|}\n\\]\n\nSo the output swing in the linear region is between those limits.\n\n---\n\n## 2) Small-signal behavior\n\nTreat \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) as AC ground.\n\n- \\(M_1\\) contributes mainly its output resistance \\(r_{o1}\\)\n- \\(M_2\\) is the amplifying transistor with transconductance \\(g_{m2}\\) and output resistance \\(r_{o2}\\)\n\nAt the output node,\n\n\\[\n\\frac{v_o}{r_{o1}}+\\frac{v_o-v_i}{r_{o2}}-g_{m2}v_i=0\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v \\equiv \\frac{v_o}{v_i}\n=\n\\frac{g_{m2}+1/r_{o2}}{1/r_{o1}+1/r_{o2}}\n}\n\\]\n\nand if \\(g_{m2}\\gg 1/r_{o2}\\),\n\n\\[\n\\boxed{\nA_v \\approx g_{m2}(r_{o1}\\parallel r_{o2})\n}\n\\]\n\nSo the stage has **positive voltage gain**.\n\n### Why the gain is positive\nIf \\(v_{in}\\) increases:\n- source voltage of \\(M_2\\) rises\n- \\(V_{GS2}\\) decreases\n- \\(I_{D2}\\) decreases\n- the PMOS load \\(M_1\\) pulls the output upward\n\nSo:\n\n\\[\nv_{in}\\uparrow \\;\\Rightarrow\\; v_{out}\\uparrow\n\\]\n\nThis is a **non-inverting** amplifier.\n\n---\n\n## 3) Input and output resistances\n\n- **Output resistance** (with input AC-grounded):\n\\[\n\\boxed{R_{out}\\approx r_{o1}\\parallel r_{o2}}\n\\]\n\n- **Input resistance** is low, characteristic of a common-gate stage, roughly:\n\\[\n\\boxed{R_{in}\\sim \\frac{1}{g_{m2}}}\n\\]\n(more exactly, body effect may modify this slightly)\n\n---\n\n## 4) Important note\n\nIf channel-length modulation is neglected completely \\((\\lambda=0)\\), then in saturation both transistor currents are nearly independent of \\(V_{out}\\). In that idealized model, once \\(I_{D1}=I_{D2}\\), the exact DC value of \\(V_{out}\\) is not uniquely fixed. In practice, finite \\(r_o\\) (i.e. channel-length modulation) or a load determines the actual output voltage.\n\n---\n\n## Final summary\n\nThis circuit is a **common-gate NMOS amplifier with a PMOS active load**.\n\nKey results:\n\n\\[\n\\boxed{A_v \\approx +g_{m2}(r_{o1}\\parallel r_{o2})}\n\\]\n\n\\[\n\\boxed{R_{out}\\approx r_{o1}\\parallel r_{o2}}\n\\]\n\n\\[\n\\boxed{V_{b1}-V_{TN} \\le V_{out} \\le V_{b2}+|V_{TP}|}\n\\]\n\nIf you want, I can also draw the small-signal equivalent circuit and derive the gain step by step.",
        "format": "markdown",
        "sha256": "a2175ce85557f861a29b7d81e74091c81e76b209f2ee7da95ab043567b8e211b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, and gives the non-inverting gain as approximately gm2(ro1||ro2). Its low-input-resistance description is acceptable under the full-credit rule.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 25040,
        "total_tokens": 26264,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 25040,
        "total_tokens": 26264,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is a PMOS and \\(M_2\\) is an NMOS, both biased in saturation.\n\n## 1) What the circuit is\n\nThis is a **common-gate NMOS amplifier** with a **PMOS active load**:\n\n- \\(M_2\\): gate fixed at \\(V_{b1}\\), input applied at its **source** \\(\\Rightarrow\\) common-gate device  \n- \\(M_1\\): gate fixed at \\(V_{b2}\\), source at \\(V_{DD}\\) \\(\\Rightarrow\\) acts like a current-source load  \n- Output is the common drain node \\(V_{out}\\)\n\nSo the circuit is a **non-inverting voltage amplifier**.\n\n---\n\n## 2) Qualitative operation\n\nFor \\(M_2\\),\n\\[\nV_{GS2}=V_{b1}-V_{in}\n\\]\n\nSo if \\(V_{in}\\) increases:\n\n- \\(V_{GS2}\\) decreases\n- \\(I_{D2}\\) decreases\n- \\(M_1\\) still tries to source nearly the same current\n- therefore the output node rises\n\nHence:\n\n\\[\nV_{in}\\uparrow \\;\\Rightarrow\\; V_{out}\\uparrow\n\\]\n\nSo the gain is **positive**.\n\n---\n\n## 3) DC bias / saturation conditions\n\nIgnoring channel-length modulation for a moment:\n\n### PMOS load current\n\\[\nI_{D1}\\approx \\frac{\\beta_p}{2}\\big(V_{DD}-V_{b2}-|V_{TP}|\\big)^2\n\\]\n\n### NMOS current\n\\[\nI_{D2}\\approx \\frac{\\beta_n}{2}\\big(V_{b1}-V_{in}-V_{TN}\\big)^2\n\\]\n\nAt the operating point,\n\\[\nI_{D1}=I_{D2}\n\\]\n\n### Conditions for both transistors to stay in saturation\n\nFor \\(M_2\\):\n\\[\nV_{DS2}\\ge V_{GS2}-V_{TN}\n\\]\n\\[\nV_{out}-V_{in}\\ge (V_{b1}-V_{in})-V_{TN}\n\\]\n\\[\n\\boxed{V_{out}\\ge V_{b1}-V_{TN}}\n\\]\n\nFor \\(M_1\\):\n\\[\nV_{SD1}\\ge V_{SG1}-|V_{TP}|\n\\]\n\\[\nV_{DD}-V_{out}\\ge (V_{DD}-V_{b2})-|V_{TP}|\n\\]\n\\[\n\\boxed{V_{out}\\le V_{b2}+|V_{TP}|}\n\\]\n\nSo the valid output swing for both devices in saturation is approximately\n\n\\[\n\\boxed{V_{b1}-V_{TN}\\ \\le\\ V_{out}\\ \\le\\ V_{b2}+|V_{TP}|}\n\\]\n\nAlso, \\(M_2\\) must be on:\n\\[\n\\boxed{V_{in}<V_{b1}-V_{TN}}\n\\]\n\n> Note: if you ignore channel-length modulation entirely, then when both devices are in saturation and their currents match, \\(V_{out}\\) is not uniquely fixed. In practice, finite \\(r_o\\) sets the quiescent \\(V_{out}\\).\n\n---\n\n## 4) Small-signal gain\n\nFor AC analysis, \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are AC grounds.\n\nLet:\n\n- \\(g_{m2}\\): transconductance of \\(M_2\\)\n- \\(g_{mb2}\\): body-effect transconductance of \\(M_2\\)\n- \\(r_{o1}, r_{o2}\\): output resistances of \\(M_1, M_2\\)\n\nAt the output node,\n\\[\n\\frac{v_o}{r_{o1}}+\\frac{v_o-v_i}{r_{o2}}-(g_{m2}+g_{mb2})v_i=0\n\\]\n\nThus,\n\n\\[\n\\boxed{\nA_v \\equiv \\frac{v_o}{v_i}\n=\n\\frac{g_{m2}+g_{mb2}+1/r_{o2}}{1/r_{o1}+1/r_{o2}}\n}\n\\]\n\nIf \\(g_m r_o \\gg 1\\), this simplifies to\n\n\\[\n\\boxed{\nA_v \\approx (g_{m2}+g_{mb2})(r_{o1}\\parallel r_{o2})\n}\n\\]\n\nand if body effect is neglected,\n\n\\[\n\\boxed{\nA_v \\approx g_{m2}(r_{o1}\\parallel r_{o2})\n}\n\\]\n\nThe gain is **positive**.\n\n---\n\n## 5) Input and output resistances\n\n### Input resistance\nA common-gate stage has low input resistance. Roughly,\n\n\\[\n\\boxed{R_{in}\\approx \\frac{1}{g_{m2}+g_{mb2}}}\n\\]\n\n(That is the usual common-gate approximation.)\n\n### Output resistance\nWith input AC-grounded,\n\n\\[\n\\boxed{R_{out}\\approx r_{o1}\\parallel r_{o2}}\n\\]\n\n---\n\n## 6) Final interpretation\n\nThis circuit is:\n\n- a **common-gate amplifier**\n- with **PMOS active load**\n- **non-inverting**\n- **low input resistance**\n- **high output resistance**\n- voltage gain approximately\n  \\[\n  \\boxed{A_v \\approx (g_{m2}+g_{mb2})(r_{o1}\\parallel r_{o2})}\n  \\]\n\nIf you want, I can also draw the **small-signal equivalent circuit** and derive the gain step by step.",
        "format": "markdown",
        "sha256": "edd7d5e37afed3286f90196aa4c723617ba3e3aed7f856d63745b45368c48ea2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stage, source-driven input, PMOS current-source load, non-inverting gain, and low input resistance. Its gain expression is equivalent to the expected finite-r_o result; the simplified input-resistance estimate is acceptable under the full-credit rule.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 20126,
        "total_tokens": 21350,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18903,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 20126,
        "total_tokens": 21350,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18903,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**2 poles**.\n\nWhy: in the small-signal view, there are only **two independent dynamic nodes**:\n\n1. **Gate of \\(M_1\\)** after \\(R_S\\)  \n2. **Output node \\(V_{out}\\)**\n\nAll the other terminals are effectively at **AC ground** because they are tied to ideal bias/supply sources. The capacitors \\(C_{GS}, C_{GD}, C_{GD2}, C_{DB}, C_{DB2}\\) load these two nodes, but they do **not** create extra independent nodes.\n\nSo the transfer function denominator is **second order** → **2 poles**.\n\n(And \\(C_{GD}\\) can also introduce a zero, but it does not add a pole.)",
        "format": "markdown",
        "sha256": "5844ca646d9a75e98efee93568a1eb56661c2d19faf4a775f8dfbc90406866cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two dynamic nodes—the gate of M1 and the output—and places the listed capacitances on or between them. CGD may add a zero but not another pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 4305,
        "total_tokens": 6046,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 4305,
        "total_tokens": 6046,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**2 poles**.\n\nReason: with the bias/supply nodes treated as **AC ground**, the circuit has only **two independent signal nodes**:\n\n1. the **gate of \\(M_1\\)**  \n2. the **output node \\(V_{out}\\)**\n\nAll the shown capacitances either go to AC ground or couple these two nodes, so they do **not** create more than a **second-order** system.  \n(\\(C_{GD}\\) can introduce a zero, but the number of **poles** is still **2**.)",
        "format": "markdown",
        "sha256": "96d3a5140e83dd7f86a414003d466716ed15b0d7354f56f1f971ffd743d104ea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent nodes—the gate of M1 and the output—so the circuit has two poles; the note that CGD can add a zero is also correct.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 5656,
        "total_tokens": 7397,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5535,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 5656,
        "total_tokens": 7397,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5535,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\nWhy:\n- The number of poles is set by the number of **independent dynamic nodes** (independent capacitor voltages), not just the number of capacitors.\n- Here, with the bias/supply nodes treated as **AC ground**, there are only **two independent nodes**:\n  1. **Gate of \\(M_1\\)**  \n  2. **Output node \\(V_{out}\\)**\n\nSo the small-signal transfer function is **second order**, i.e. **2 poles**.\n\nNote: \\(C_{GD}\\) can also introduce a **zero**, but it does **not** add another pole.",
        "format": "markdown",
        "sha256": "671c265919f8b859907d3bef163dc9e6e59a99bda8aa42feb036a653eab18e53"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent capacitive nodes—the M1 gate and output—and notes that CGD adds a zero, not a third pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 4277,
        "total_tokens": 6018,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4132,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 4277,
        "total_tokens": 6018,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4132,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat \\(M_1\\) and \\(M_2\\) as nMOS devices, and let the node between them be \\(V_X\\).\n\nAssume the usual long-channel square-law model, same threshold \\(V_T\\), and ignore body effect / channel-length modulation for the first-pass analysis.\n\n## 1) What kind of circuit is it?\nThis is a **resistor-loaded inverting stage**.  \nThe pull-down network is the series pair \\(M_2\\)-\\(M_1\\), both gates driven by \\(V_{in}\\).\n\nSo qualitatively:\n\n- **Low \\(V_{in}\\)** \\(\\to\\) transistors off \\(\\to\\) \\(V_{out}\\approx V_{DD}\\)\n- **High \\(V_{in}\\)** \\(\\to\\) pull-down conducts \\(\\to\\) \\(V_{out}\\) falls\n\nSo it behaves like an **inverter / common-source stage**.\n\n---\n\n## 2) Region of operation of \\(M_1\\) and \\(M_2\\)\n\nLet \\(V_{OV}=V_{in}-V_T\\).\n\n### Cutoff\nIf\n\\[\nV_{in}\\le V_T\n\\]\nboth transistors are off, so\n\\[\nI_D=0,\\qquad V_{out}=V_{DD}.\n\\]\n\n### When the stack conducts\nA useful observation:\n\n- \\(M_2\\) is on only if\n  \\[\n  V_{GS2}=V_{in}-V_X > V_T\n  \\;\\Rightarrow\\;\n  V_X < V_{in}-V_T = V_{OV}\n  \\]\n- \\(M_1\\) would be in saturation only if\n  \\[\n  V_{DS1}=V_X \\ge V_{GS1}-V_T = V_{OV}\n  \\]\n\nThese two conditions cannot both hold. Therefore:\n\n> **Whenever current flows, \\(M_1\\) is never in saturation; it is always in triode.**\n\nSo the only on-state possibilities are:\n\n1. \\(M_1\\) triode, \\(M_2\\) saturation  \n2. \\(M_1\\) triode, \\(M_2\\) triode\n\n---\n\n## 3) Equivalent transistor seen from \\((V_{in},V_{out})\\)\n\nIf\n\\[\n\\beta_i=\\mu_n C_{ox}(W/L)_i\n\\]\nfor each MOSFET, then the series pair with tied gates is externally equivalent to a **single nMOS** with\n\n\\[\n\\boxed{\\beta_{eq}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}}\n\\]\n\nand approximately the same threshold \\(V_T\\).\n\nSo its \\(I\\!-\\!V\\) law is:\n\n\\[\nI_D=\n\\begin{cases}\n0, & V_{in}\\le V_T \\\\[2mm]\n\\dfrac{\\beta_{eq}}{2}(V_{in}-V_T)^2,\n& V_{out}\\ge V_{in}-V_T \\\\[3mm]\n\\beta_{eq}\\!\\left[(V_{in}-V_T)V_{out}-\\dfrac{V_{out}^2}{2}\\right],\n& V_{out}<V_{in}-V_T\n\\end{cases}\n\\]\n\nThis is exactly the same form as a single MOSFET.\n\n### If \\(M_1\\) and \\(M_2\\) are identical\nThen \\(\\beta_1=\\beta_2=\\beta\\), so\n\n\\[\n\\boxed{\\beta_{eq}=\\frac{\\beta}{2}}\n\\]\n\nSo the pair behaves like **one transistor of half the strength**, i.e. same as:\n\n- half the width, or\n- twice the channel length\n\nIf both have the same width \\(W\\), then effectively \\(L_{eq}=L_1+L_2\\).\n\n---\n\n## 4) Output voltage\n\nThe resistor gives the load-line equation:\n\n\\[\n\\boxed{\\frac{V_{DD}-V_{out}}{R_D}=I_D}\n\\]\n\nHence:\n\n### For \\(V_{in}\\le V_T\\)\n\\[\n\\boxed{V_{out}=V_{DD}}\n\\]\n\n### If the equivalent transistor is in saturation\n\\[\nV_{out}=V_{DD}-R_D\\frac{\\beta_{eq}}{2}(V_{in}-V_T)^2\n\\]\nvalid while\n\\[\nV_{out}\\ge V_{in}-V_T\n\\]\n\n### If the equivalent transistor is in triode\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\beta_{eq}\\left[(V_{in}-V_T)V_{out}-\\frac{V_{out}^2}{2}\\right]\n\\]\nwhich you solve for \\(V_{out}\\).\n\n---\n\n## 5) Important conclusions\n\n- The circuit is an **inverting stage**.\n- The two-transistor stack is weaker than a single same-size nMOS.\n- For identical devices, it is equivalent to **one nMOS with \\(\\beta/2\\)**.\n- Therefore this whole circuit is just a **resistor-load NMOS inverter** with a weaker pull-down.\n- When the output is low, there is a dc path from \\(V_{DD}\\) to ground, so it has **static power dissipation**.\n\n---\n\n## 6) Small extra note\nIn a real IC, the upper transistor \\(M_2\\) usually has **body effect** because its source rises above ground. That increases its threshold and makes the pull-down even weaker than the ideal \\(\\beta/2\\) result.\n\nIf you want, I can also derive the full \\(V_{out}\\)–\\(V_{in}\\) transfer curve explicitly for the identical-transistor case.",
        "format": "markdown",
        "sha256": "d94bed9f6938d48a550ed2053aa5c344e96860ad27d81059fada1665c754148d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS pair, places the lower device M1 in triode, and derives the effective strength corresponding to a longer channel (for equal widths, L_eff = L1 + L2). The ideal-model assumptions and secondary inverter/load observations are consistent with the circuit.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 25963,
        "total_tokens": 27391,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 25963,
        "total_tokens": 27391,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are identical long-channel nMOS devices, with threshold \\(V_T\\), and neglect body effect and channel-length modulation.\n\nLet the node between \\(M_1\\) and \\(M_2\\) be \\(V_X\\).\n\n## 1) Device voltages\n\\[\nV_{GS1}=V_{in}, \\qquad V_{DS1}=V_X\n\\]\n\\[\nV_{GS2}=V_{in}-V_X, \\qquad V_{DS2}=V_{out}-V_X\n\\]\n\n## 2) Key observation\nFor current to flow through \\(M_2\\),\n\\[\nV_{GS2}>V_T \\;\\Rightarrow\\; V_X < V_{in}-V_T \\equiv V_{OV}\n\\]\nBut \\(M_1\\) would be saturated only if\n\\[\nV_{DS1} \\ge V_{GS1}-V_T \\;\\Rightarrow\\; V_X \\ge V_{OV}\n\\]\nSo whenever the pair is on, **\\(M_1\\) cannot be in saturation**. Thus:\n\n- \\(M_1\\): always in **triode** when conducting\n- \\(M_2\\): either **saturation** or **triode**, depending on \\(V_{out}\\)\n\nAlso, for \\(M_2\\),\n\\[\nV_{DS2}\\ge V_{GS2}-V_T\n\\;\\Rightarrow\\;\nV_{out}\\ge V_{in}-V_T = V_{OV}\n\\]\nSo \\(M_2\\) is saturated if \\(V_{out}\\ge V_{OV}\\).\n\n---\n\n## 3) Large-signal current\n\nLet each transistor have parameter\n\\[\n\\beta = \\mu_n C_{ox}\\frac{W}{L}\n\\]\nso that a single MOSFET has\n\n- triode: \\(\\displaystyle I_D=\\beta\\left[(V_{GS}-V_T)V_{DS}-\\frac{V_{DS}^2}{2}\\right]\\)\n- saturation: \\(\\displaystyle I_D=\\frac{\\beta}{2}(V_{GS}-V_T)^2\\)\n\n### Case A: \\(V_{out}\\ge V_{OV}\\)  (\\(M_2\\) saturated)\n\\[\nI_D=\\beta\\left(V_{OV}V_X-\\frac{V_X^2}{2}\\right)\n\\]\nfor \\(M_1\\), and\n\\[\nI_D=\\frac{\\beta}{2}(V_{OV}-V_X)^2\n\\]\nfor \\(M_2\\).\n\nEquating them gives\n\\[\nV_X=\\left(1-\\frac{1}{\\sqrt2}\\right)V_{OV}\n\\]\nand therefore\n\\[\nI_D=\\frac{\\beta}{4}V_{OV}^2\n\\]\n\n### Case B: \\(V_{out}<V_{OV}\\)  (both in triode)\nEliminating \\(V_X\\) gives\n\\[\nI_D=\\frac{\\beta}{2}\\left(V_{OV}V_{out}-\\frac{V_{out}^2}{2}\\right)\n\\]\n\n---\n\n## 4) Important result: equivalent transistor\nThese are exactly the I–V equations of **one nMOS transistor** with\n\n\\[\n\\beta_{\\text{eq}}=\\frac{\\beta}{2}\n\\]\n\nSo the series pair \\(M_1\\)-\\(M_2\\) with tied gates behaves like a **single transistor of twice the channel length** (same \\(W\\), length \\(2L\\)).\n\nSo the whole circuit is just a **resistor-loaded common-source stage/inverter** with a weaker pull-down device.\n\n---\n\n## 5) Output voltage relation\nSince the resistor current is\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}\n\\]\nthe transfer characteristic is:\n\n### Cutoff\nIf\n\\[\nV_{in}\\le V_T\n\\]\nboth transistors are off, so\n\\[\nV_{out}=V_{DD}\n\\]\n\n### Saturation region of the equivalent device\nIf\n\\[\nV_{out}\\ge V_{in}-V_T\n\\]\nthen\n\\[\nV_{out}=V_{DD}-R_D\\frac{\\beta}{4}(V_{in}-V_T)^2\n\\]\n\n### Triode region of the equivalent device\nIf\n\\[\nV_{out}<V_{in}-V_T\n\\]\nthen\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\frac{\\beta}{2}\\left[(V_{in}-V_T)V_{out}-\\frac{V_{out}^2}{2}\\right]\n\\]\nwhich is a quadratic in \\(V_{out}\\).\n\n---\n\n## 6) Small-signal gain around a saturation bias point\nSince the pair is equivalent to one transistor with \\(\\beta/2\\),\n\\[\ng_{m,\\text{eq}}=\\beta_{\\text{eq}}V_{OV}=\\frac{\\beta}{2}(V_{in}-V_T)\n\\]\nSo, neglecting \\(r_o\\),\n\\[\nA_v \\approx -g_{m,\\text{eq}}R_D\n= -\\frac{\\beta R_D}{2}(V_{in}-V_T)\n\\]\n\n---\n\n## 7) Interpretation\n- Low \\(V_{in}\\): both MOSFETs off \\(\\Rightarrow V_{out}\\approx V_{DD}\\)\n- High \\(V_{in}\\): current flows through \\(R_D\\), \\(M_2\\), \\(M_1\\) \\(\\Rightarrow V_{out}\\) drops\n\nSo the circuit is an **inverting stage**.\n\n## Final takeaway\nThe stack \\(M_1\\)-\\(M_2\\) with common gate is, to first order, equivalent to **one nMOS with half the \\(\\beta\\)** (or twice the channel length). Therefore the circuit behaves like a standard resistor-loaded nMOS inverter/amplifier using that equivalent transistor.\n\nIf you want, I can also draw the exact equivalent circuit and derive the explicit \\(V_{out}(V_{in})\\) quadratic solution.",
        "format": "markdown",
        "sha256": "99bb6294a0b74da450c9f1a97f2fdcea77f88a06ced4a4eab40ce5dbf905702a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS stack, explains the lower device’s triode operation, and reaches the key conclusion: it behaves approximately like one device with twice the channel length (half the beta). The ideal square-law analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 24356,
        "total_tokens": 25784,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23035,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 24356,
        "total_tokens": 25784,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23035,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are NMOS transistors, long-channel, with the same \\(V_T\\), and ignore body effect and channel-length modulation.\n\nThis circuit is a resistor-load inverter, but the pull-down device is a stack of two NMOS with their gates tied together.  \nA useful result is:\n\n- the stack behaves like one equivalent NMOS\n- with the same threshold \\(V_T\\)\n- but reduced strength\n\nLet the intermediate node between \\(M_1\\) and \\(M_2\\) be \\(V_X\\).\n\nThen\n\n- \\(V_{GS1}=V_{in}\\)\n- \\(V_{DS1}=V_X\\)\n- \\(V_{GS2}=V_{in}-V_X\\)\n- \\(V_{DS2}=V_{out}-V_X\\)\n\n## 1) Region behavior\n\n### For \\(V_{in} \\le V_T\\)\nBoth transistors are off, so\n\n\\[\nI_D=0,\\qquad V_{out}=V_{DD}\n\\]\n\nSo the circuit outputs logic high.\n\n---\n\n### For \\(V_{in} > V_T\\)\nCurrent can flow. Also, for \\(M_2\\) to conduct,\n\n\\[\nV_{GS2}=V_{in}-V_X > V_T\n\\Rightarrow V_X < V_{in}-V_T\n\\]\n\nBut \\(M_1\\) would be in saturation only if\n\n\\[\nV_{DS1}=V_X \\ge V_{GS1}-V_T = V_{in}-V_T\n\\]\n\nwhich contradicts the condition above. Therefore:\n\n- \\(M_1\\) is always in triode when the stack conducts\n- \\(M_2\\) is either in saturation or triode\n\nSo the only ON cases are:\n\n1. \\(M_1\\) triode, \\(M_2\\) saturation\n2. \\(M_1\\) triode, \\(M_2\\) triode\n\n---\n\n## 2) Equivalent transistor result\n\nUsing the square-law equations and setting \\(I_{D1}=I_{D2}\\), the pair reduces to a single equivalent NMOS with\n\n\\[\n\\beta_{eq}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}\n\\]\n\nwhere\n\n\\[\n\\beta_i=\\mu_n C_{ox}\\left(\\frac WL\\right)_i\n\\]\n\nSo the series pair behaves like one transistor with:\n\n- threshold \\(V_T\\)\n- strength \\(\\beta_{eq}\\)\n\nIf the two devices are identical \\((\\beta_1=\\beta_2=\\beta)\\), then\n\n\\[\n\\beta_{eq}=\\frac{\\beta}{2}\n\\]\n\nSo the stack is equivalent to a single NMOS with half the drive strength, i.e. same as doubling the channel length.\n\n---\n\n## 3) Drain current of the equivalent device\n\nLet\n\n\\[\nV_{OV}=V_{in}-V_T\n\\]\n\n### Equivalent saturation region\nCondition:\n\n\\[\nV_{out}\\ge V_{OV}\n\\]\n\nThen\n\n\\[\nI_D=\\frac{\\beta_{eq}}{2}V_{OV}^2\n\\]\n\nSo\n\n\\[\nV_{out}=V_{DD}-R_D\\frac{\\beta_{eq}}{2}(V_{in}-V_T)^2\n\\]\n\nFor identical transistors:\n\n\\[\nV_{out}=V_{DD}-R_D\\frac{\\beta}{4}(V_{in}-V_T)^2\n\\]\n\n---\n\n### Equivalent triode region\nCondition:\n\n\\[\nV_{out}<V_{OV}\n\\]\n\nThen\n\n\\[\nI_D=\\beta_{eq}\\left[(V_{in}-V_T)V_{out}-\\frac{V_{out}^2}{2}\\right]\n\\]\n\nUsing the resistor current,\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\beta_{eq}\\left[(V_{in}-V_T)V_{out}-\\frac{V_{out}^2}{2}\\right]\n\\]\n\nor\n\n\\[\n\\frac{\\beta_{eq}R_D}{2}V_{out}^2\n-\n\\left[1+\\beta_{eq}R_D(V_{in}-V_T)\\right]V_{out}\n+V_{DD}=0\n\\]\n\nThis gives \\(V_{out}\\) in the low-output region.\n\n---\n\n## 4) Transition between the two ON regions\n\nBoundary occurs when\n\n\\[\nV_{out}=V_{in}-V_T\n\\]\n\nSo\n\n\\[\nV_{DD}-R_D\\frac{\\beta_{eq}}{2}(V_{in}-V_T)^2\n=\nV_{in}-V_T\n\\]\n\nThis determines where \\(M_2\\) changes from saturation to triode.\n\n---\n\n## 5) Qualitative interpretation\n\nFunctionally, this is still an inverter:\n\n- low \\(V_{in}\\) \\(\\rightarrow\\) output high\n- high \\(V_{in}\\) \\(\\rightarrow\\) output low\n\nBut compared with a single NMOS pull-down of size \\(\\beta\\), the pull-down is weaker.\n\nFor identical devices, the stack is equivalent to one transistor with:\n\n- same \\(V_T\\)\n- \\(\\beta/2\\)\n\nSo the transfer curve is the same as a standard resistor-load NMOS inverter, just with a weaker pull-down.\n\n---\n\n## 6) Important practical note\n\nIf body effect is included, the upper transistor \\(M_2\\) has \\(V_{SB}>0\\), so its threshold rises. Then the exact \\(\\beta/2\\) equivalence is no longer exact, and the stack becomes even weaker than the ideal analysis predicts.\n\nIf you want, I can also derive the full \\(V_{out}\\)–\\(V_{in}\\) transfer characteristic explicitly for the identical-transistor case.",
        "format": "markdown",
        "sha256": "1c5828cdf6e1578ac90762ab950ed05a149c065cb725b85a381f45764846ecd9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS stack, recognizes the lower device’s triode operation, and derives the equivalent drive strength corresponding to an effective channel length of L1 + L2 (twice the length for identical devices).",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 23522,
        "total_tokens": 24950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 23522,
        "total_tokens": 24950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are matched **NMOS** transistors, the tail source \\(I_1\\) is ideal, and both devices are in saturation unless noted.\n\n## 1) What the circuit is\nThis is a **single-ended MOS differential pair**:\n\n- \\(M_1\\) gate gets the signal \\(V_{in}\\)\n- \\(M_2\\) gate gets the reference/bias \\(V_b\\)\n- \\(I_1\\) is the tail current\n- \\(R_D\\) converts the current in \\(M_2\\) into the output voltage\n\nSo the circuit **compares \\(V_{in}\\) with \\(V_b\\)** and steers the current \\(I_1\\) between \\(M_1\\) and \\(M_2\\).\n\n## 2) Qualitative operation\n- If \\(V_{in}\\) increases, \\(M_1\\) takes more current.\n- Since the tail current is fixed, \\(M_2\\) must take less current.\n- Less current through \\(R_D\\) means less drop across \\(R_D\\).\n- Therefore **\\(V_{out}\\) rises**.\n\nSo the stage is **non-inverting**:\n\n- \\(V_{in} > V_b \\Rightarrow V_{out}\\) high\n- \\(V_{in} < V_b \\Rightarrow V_{out}\\) low\n\nThe total current drawn from \\(V_{DD}\\) is approximately constant and equal to \\(I_1\\); the input only **steers** that current.\n\n---\n\n## 3) DC equations\nLet the common-source node voltage be \\(V_S\\). Then\n\n\\[\nI_{D1}=\\frac{\\beta}{2}(V_{in}-V_S-V_T)^2\n\\]\n\n\\[\nI_{D2}=\\frac{\\beta}{2}(V_b-V_S-V_T)^2\n\\]\n\nwith\n\n\\[\nI_{D1}+I_{D2}=I_1\n\\]\n\nand the output is\n\n\\[\nV_{out}=V_{DD}-R_D I_{D2}\n\\]\n\nThese equations are valid while the two MOSFETs are on and in saturation.\n\n---\n\n## 4) Balanced point\nIf \\(V_{in}=V_b\\), symmetry gives\n\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2}\n\\]\n\nso\n\n\\[\nV_{out,Q}=V_{DD}-\\frac{I_1R_D}{2}\n\\]\n\nThus the transition is centered at \\(V_{in}\\approx V_b\\) for matched devices.\n\n---\n\n## 5) Exact transfer characteristic for matched devices\nLet\n\n\\[\n\\Delta = V_{in}-V_b\n\\]\n\nThen, while both transistors conduct,\n\n\\[\nI_{D2}=\n\\frac{\\beta}{2}\n\\left(\n\\sqrt{\\frac{I_1}{\\beta}-\\frac{\\Delta^2}{4}}\n-\\frac{\\Delta}{2}\n\\right)^2\n\\]\n\nand therefore\n\n\\[\nV_{out}=V_{DD}-R_D I_{D2}\n\\]\n\nThis is valid for\n\n\\[\n|\\Delta| \\le \\sqrt{\\frac{2I_1}{\\beta}}\n\\]\n\nOutside this region, one device cuts off:\n\n### If \\(V_{in}-V_b \\ge \\sqrt{2I_1/\\beta}\\)\n- \\(M_1\\) carries essentially all the current\n- \\(M_2\\) turns off\n- \\(\\displaystyle V_{out}\\approx V_{DD}\\)\n\n### If \\(V_{in}-V_b \\le -\\sqrt{2I_1/\\beta}\\)\n- \\(M_2\\) carries essentially all the current\n- \\(\\displaystyle V_{out}\\approx V_{DD}-I_1R_D\\)\n\nSo the output swings approximately between\n\n\\[\nV_{DD}-I_1R_D \\quad \\text{and} \\quad V_{DD}\n\\]\n\n---\n\n## 6) Small-signal gain around \\(V_{in}=V_b\\)\nAt the symmetric bias point, each transistor carries \\(I_1/2\\), so\n\n\\[\ng_m = \\sqrt{\\beta I_1}\n\\]\n\nFor a small signal around that point,\n\n\\[\n\\delta I_{D2}\\approx -\\frac{g_m}{2}\\,\\delta V_{in}\n\\]\n\nThus\n\n\\[\n\\delta V_{out} = -R_D\\,\\delta I_{D2}\n\\]\n\nso the voltage gain is\n\n\\[\nA_v \\equiv \\frac{\\delta V_{out}}{\\delta V_{in}}\n\\approx +\\frac{g_m R_D}{2}\n\\]\n\nSo near the operating point,\n\n\\[\nV_{out}\\approx\nV_{DD}-\\frac{I_1R_D}{2}\n+\\frac{g_mR_D}{2}(V_{in}-V_b)\n\\]\n\n---\n\n## 7) Headroom / saturation condition\nFor the simple equations above to hold, \\(M_2\\) should remain in saturation. A useful condition is\n\n\\[\nV_{out} \\ge V_b - V_T\n\\]\n\nThe worst case is when \\(M_2\\) carries all the current, so approximately\n\n\\[\nV_{DD}-I_1R_D \\ge V_b - V_T\n\\]\n\nAlso, the tail current source must have enough compliance at the common-source node.\n\n---\n\n## Final interpretation\nThis circuit is a **current-steering differential pair with a single-ended resistive output**.\n\n- It behaves like a **non-inverting comparator/amplifier**\n- Threshold is roughly **\\(V_b\\)**\n- Midpoint output is **\\(V_{DD}-I_1R_D/2\\)**\n- Small-signal gain is approximately **\\(+g_mR_D/2\\)**\n\nIf you want, I can also derive the result using the small-signal equivalent circuit step by step.",
        "format": "markdown",
        "sha256": "3346f2ad07de052bef26b4c4c18786ab7025f359d1ca2de0dc2c7ab2a449d315"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a single-ended differential pair with M2 biased at Vb and the output at its drain. Its current-steering explanation and non-inverting gain agree with the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 23887,
        "total_tokens": 26182,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 23887,
        "total_tokens": 26182,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are matched **NMOS** devices, the tail source \\(I_1\\) is ideal, and first-order MOS equations apply.\n\n## 1) What this circuit is\nThis is a **source-coupled pair** with a **single-ended output**.\n\n- \\(M_1\\) and \\(M_2\\) share the fixed tail current \\(I_1\\)\n- \\(V_{in}\\) is compared against the reference/bias \\(V_b\\)\n- The output is taken only from the \\(M_2\\) side through \\(R_D\\)\n\nSo the circuit **steers current** between \\(M_1\\) and \\(M_2\\).\n\n---\n\n## 2) Qualitative operation\nBecause\n\\[\nI_{D1}+I_{D2}=I_1\n\\]\nand\n\\[\nV_{out}=V_{DD}-I_{D2}R_D,\n\\]\nwe get:\n\n- If \\(V_{in}\\) **increases**, \\(M_1\\) takes more of the tail current\n- Then \\(M_2\\) current decreases\n- So the drop across \\(R_D\\) decreases\n- Hence \\(V_{out}\\) **increases**\n\nSo the stage is **non-inverting**:\n\\[\nV_{in}\\uparrow \\;\\Rightarrow\\; V_{out}\\uparrow\n\\]\n\nAlso:\n\n- If \\(V_{in} \\ll V_b\\): \\(M_2\\) takes almost all of \\(I_1\\), so \\(V_{out}\\) is low\n- If \\(V_{in} \\gg V_b\\): \\(M_1\\) takes almost all of \\(I_1\\), so \\(V_{out}\\) is high\n\nThus it behaves like a **comparator-like** or **amplifying** stage centered around \\(V_{in}\\approx V_b\\).\n\n---\n\n## 3) DC / large-signal analysis\nLet\n\\[\nI_D=\\frac{\\beta}{2}(V_{GS}-V_T)^2\n\\]\nfor each MOSFET in saturation.\n\nLet the common-source node voltage be \\(V_S\\). Then\n\\[\nI_{D1}=\\frac{\\beta}{2}(V_{in}-V_S-V_T)^2\n\\]\n\\[\nI_{D2}=\\frac{\\beta}{2}(V_b-V_S-V_T)^2\n\\]\nwith\n\\[\nI_{D1}+I_{D2}=I_1.\n\\]\n\nDefine\n\\[\n\\Delta = V_{in}-V_b.\n\\]\n\n### Both transistors on\nFor the region where both devices conduct,\n\\[\n|\\Delta|\\le \\sqrt{\\frac{2I_1}{\\beta}},\n\\]\nthe right-branch current is\n\\[\nI_{D2}\n=\n\\frac{I_1}{2}\n-\n\\frac{\\beta \\Delta}{4}\n\\sqrt{\\frac{4I_1}{\\beta}-\\Delta^2}.\n\\]\n\nHence\n\\[\nV_{out}=V_{DD}-R_D I_{D2}.\n\\]\n\n### End regions\n- If\n  \\[\n  \\Delta \\le -\\sqrt{\\frac{2I_1}{\\beta}},\n  \\]\n  then \\(M_2\\) takes essentially all the tail current:\n  \\[\n  I_{D2}\\approx I_1,\\qquad\n  V_{out}\\approx V_{DD}-I_1R_D.\n  \\]\n\n- If\n  \\[\n  \\Delta \\ge +\\sqrt{\\frac{2I_1}{\\beta}},\n  \\]\n  then \\(M_2\\) is off:\n  \\[\n  I_{D2}\\approx 0,\\qquad\n  V_{out}\\approx V_{DD}.\n  \\]\n\nSo the transfer is an increasing S-shaped curve from\n\\[\nV_{DD}-I_1R_D\n\\quad\\text{to}\\quad\nV_{DD},\n\\]\ncentered near\n\\[\nV_{in}=V_b.\n\\]\n\n---\n\n## 4) Small-signal gain\nBias at the symmetric point:\n\\[\nV_{in}=V_b\n\\]\nthen\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2}.\n\\]\n\nAt this bias,\n\\[\ng_m=\\sqrt{\\beta I_1}\n\\]\nfor each transistor.\n\n### Quick small-signal result\nWith \\(V_b\\) as AC ground and neglecting \\(r_o\\),\n\n- the common source node moves by about\n  \\[\n  v_s \\approx \\frac{v_{in}}{2}\n  \\]\n- the change in \\(M_2\\) current is\n  \\[\n  i_{d2} \\approx -\\frac{g_m}{2}v_{in}\n  \\]\n- therefore\n  \\[\n  v_{out} \\approx +\\frac{g_mR_D}{2}\\,v_{in}\n  \\]\n\nSo the voltage gain is approximately\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n\\approx +\\frac{g_mR_D}{2}.\n\\]\n\nIf you include finite \\(r_o\\), a common approximation is\n\\[\nA_v \\approx +\\frac{g_m}{2}(R_D\\parallel r_{o2}).\n\\]\n\n### More general small-signal form\nIf \\(g_{m1}\\neq g_{m2}\\),\n\\[\nA_d \\approx\n\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\,R_D\n\\]\nfor the differential input \\((v_{in}-v_b)\\), so\n\\[\nv_{out}\\approx\n\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D\\,(v_{in}-v_b).\n\\]\n\n---\n\n## 5) Quiescent output\nAt \\(V_{in}=V_b\\),\n\\[\nV_{out,Q}=V_{DD}-\\frac{I_1R_D}{2}.\n\\]\n\n---\n\n## 6) Region-of-operation checks\nTo keep \\(M_2\\) in saturation,\n\\[\nV_{out}\\ge V_b-V_T.\n\\]\n\nTo keep \\(M_1\\) in saturation,\n\\[\nV_{DD}\\ge V_{in}-V_T.\n\\]\n\nIf these are violated, the exact large-signal formulas above change.\n\n---\n\n## 7) Summary\nThis circuit is a **single-ended differential pair** / **current-steering amplifier**:\n\n- It compares \\(V_{in}\\) to \\(V_b\\)\n- It is **non-inverting**\n- Output range is roughly\n  \\[\n  V_{DD}-I_1R_D \\;\\to\\; V_{DD}\n  \\]\n- Around \\(V_{in}=V_b\\), the small-signal gain is\n  \\[\n  A_v \\approx +\\frac{g_mR_D}{2}.\n  \\]\n\nIf you want, I can also draw the **small-signal equivalent circuit** and derive \\(A_v\\) step by step.",
        "format": "markdown",
        "sha256": "fef6dc20c0ea31378b8a5544cc9cb9b70509a412d35ea77f45c12c9f6f39efae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair with M2 biased at Vb and the output at its drain. It also gives the correct non-inverting signal behavior and matched-device gain; the extra analysis does not contradict the essential answer.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2295,
        "output_tokens": 25890,
        "total_tokens": 28185,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2295,
        "output_tokens": 25890,
        "total_tokens": 28185,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1,M_2\\) are NMOS, long-channel, matched, and the tail source \\(I_1\\) is ideal:\n\n## 1) What the circuit is\nThis is a **single-ended source-coupled pair** (MOS differential pair).\n\n- \\(M_1\\) gets the signal \\(V_{in}\\)\n- \\(M_2\\) gets a fixed reference/bias \\(V_b\\)\n- \\(I_1\\) is the tail current\n- \\(R_D\\) converts the current in \\(M_2\\) into the output voltage\n\nIt can also be viewed as:\n- \\(M_1\\): source follower\n- \\(M_2\\): common-gate stage\n\nSo the overall stage is **non-inverting**.\n\n---\n\n## 2) DC relations\nLet the common source node be \\(V_S\\). If both MOSFETs are in saturation,\n\n\\[\nI_{D1}=\\frac{\\beta_1}{2}(V_{in}-V_S-V_T)^2\n\\]\n\n\\[\nI_{D2}=\\frac{\\beta_2}{2}(V_b-V_S-V_T)^2\n\\]\n\nand the tail-current constraint is\n\n\\[\nI_{D1}+I_{D2}=I_1\n\\]\n\nThe output is\n\n\\[\nV_{out}=V_{DD}-R_D I_{D2}\n\\]\n\nSo \\(V_{out}\\) is determined by how the tail current splits between \\(M_1\\) and \\(M_2\\).\n\n---\n\n## 3) Qualitative operation\n- If \\(V_{in}\\) **increases**, \\(M_1\\) takes more of the tail current.\n- Since \\(I_1\\) is fixed, \\(M_2\\) then takes less current.\n- Less current through \\(R_D\\) means less voltage drop across \\(R_D\\).\n- Therefore \\(V_{out}\\) **rises**.\n\nLikewise:\n- If \\(V_{in}\\) **decreases**, \\(M_2\\) takes more current, so \\(V_{out}\\) **falls**.\n\nSo the stage has **positive voltage gain**.\n\n---\n\n## 4) Balanced bias point\nIf the devices are matched and\n\n\\[\nV_{in}=V_b\n\\]\n\nthen the current splits equally:\n\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2}\n\\]\n\nHence the quiescent output is\n\n\\[\nV_{out,Q}=V_{DD}-\\frac{I_1R_D}{2}\n\\]\n\nThis is the natural operating point.\n\n---\n\n## 5) Small-signal gain\nLet the small-signal source-node voltage be \\(v_s\\).  \nWith an ideal tail source, small-signal current in the tail is zero, so\n\n\\[\ng_{m1}(v_{in}-v_s)=g_{m2}v_s\n\\]\n\nThus,\n\n\\[\nv_s=\\frac{g_{m1}}{g_{m1}+g_{m2}}\\,v_{in}\n\\]\n\nNow \\(M_2\\) is a common-gate device, so\n\n\\[\nv_{out}=g_{m2}R_D\\,v_s\n\\]\n\nTherefore,\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n=\n\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\,R_D\n\\]\n\n### If \\(M_1\\) and \\(M_2\\) are matched:\n\\[\ng_{m1}=g_{m2}=g_m\n\\]\n\nso\n\n\\[\nA_v=\\frac{g_mR_D}{2}\n\\]\n\nSo the effective transconductance is \\(g_m/2\\).\n\n---\n\n## 6) Large-signal limits\nSince the tail current is fixed:\n\n- If \\(V_{in} \\gg V_b\\), almost all current goes through \\(M_1\\), so\n  \\[\n  I_{D2}\\approx 0,\\qquad V_{out}\\approx V_{DD}\n  \\]\n\n- If \\(V_{in} \\ll V_b\\), almost all current goes through \\(M_2\\), so\n  \\[\n  I_{D2}\\approx I_1,\\qquad V_{out}\\approx V_{DD}-I_1R_D\n  \\]\n\nThus the output swing is roughly between\n\n\\[\nV_{DD}-I_1R_D \\quad \\text{and} \\quad V_{DD}\n\\]\n\n---\n\n## 7) Saturation condition\nFor \\(M_2\\) to remain in saturation,\n\n\\[\nV_{DS2} \\ge V_{GS2}-V_T\n\\]\n\nwhich reduces to\n\n\\[\nV_{out} \\ge V_b - V_T\n\\]\n\nSo for full current steering while keeping \\(M_2\\) saturated, you want approximately\n\n\\[\nV_{DD}-I_1R_D \\ge V_b - V_T\n\\]\n\n\\(M_1\\) is usually safely in saturation because its drain is tied to \\(V_{DD}\\).\n\n---\n\n## 8) Summary\nThis circuit is a **single-ended MOS differential amplifier / comparator-like stage**:\n\n- \\(V_b\\) sets the reference level\n- \\(I_1\\) sets the transconductance and current\n- \\(R_D\\) converts current to output voltage and sets gain\n\n### Key result:\n\\[\nA_v \\approx +\\frac{g_mR_D}{2}\n\\quad\\text{(matched pair, ideal tail source)}\n\\]\n\nand the transfer is **non-inverting**:\n\\[\nV_{in}\\uparrow \\;\\Rightarrow\\; V_{out}\\uparrow\n\\]\n\nIf you want, I can also derive the **exact large-signal transfer characteristic \\(V_{out}(V_{in})\\)** for matched MOSFETs.",
        "format": "markdown",
        "sha256": "31211798ef9d85eaf7e0134606d275a23dff3ae31f15bb57af34cfeb6cf95231"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair and its equivalent source-follower driving a common-gate stage, with the correct non-inverting signal path and gain. The extra analysis is consistent with the essential answer.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2295,
        "output_tokens": 23024,
        "total_tokens": 25319,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2295,
        "output_tokens": 23024,
        "total_tokens": 25319,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Because this is not just a resistive MOS stage at AC.\n\nFor **small-signal output impedance**, set \\(V_{in}=0\\). Then:\n\n- \\(V_{DD}\\) and \\(V_b\\) are **AC grounds**\n- the gate of \\(M_1\\) is tied to AC ground through \\(R_S\\)\n- \\(M_1\\) still has its intrinsic **gate-source capacitance** \\(C_{gs1}\\)\n\nSo a change at \\(V_{out}\\) is coupled back to the gate through \\(C_{gs1}\\). But the gate is not rigidly grounded; it can only return through \\(R_S\\). That creates a delay with time constant \\(R_S C_{gs1}\\).\n\n## Physical picture\nIf \\(v_{out}\\) changes, the source of \\(M_1\\) changes immediately.  \nThrough \\(C_{gs1}\\), the gate is pulled along too, but only **with delay** because of \\(R_S\\).  \nThat delayed gate motion changes \\(v_{gs1}\\), and therefore changes the transistor current \\(g_{m1}v_{gs1}\\).\n\nSo the output current is no longer in phase with the output voltage. Over some frequency range, the **current lags the voltage**, which means the impedance has a **positive imaginary part**: it looks **inductive**.\n\n## Simple derivation\nIgnoring \\(r_o\\) and other parasitics for the moment, with \\(s=j\\omega\\),\n\n\\[\nv_g=\\frac{sR_SC_{gs1}}{1+sR_SC_{gs1}}\\,v_{out}\n\\]\n\nHence the output current is\n\n\\[\ni_{out}=\\frac{g_{m1}+sC_{gs1}}{1+sR_SC_{gs1}}\\,v_{out}\n\\]\n\nso\n\n\\[\nZ_{out}\\approx \\frac{v_{out}}{i_{out}}\n=\\frac{1+sR_SC_{gs1}}{g_{m1}+sC_{gs1}}\n\\]\n\nNow the imaginary part of this impedance is positive when\n\n\\[\ng_{m1}R_S>1\n\\]\n\nSo under that condition, the output impedance is **inductive**.\n\n## Low-frequency form\nFor \\(\\omega \\ll g_{m1}/C_{gs1}\\),\n\n\\[\nZ_{out}\\approx \\frac{1}{g_{m1}}\n+ s\\,\\frac{C_{gs1}}{g_{m1}^2}(g_{m1}R_S-1)\n\\]\n\nwhich is of the form\n\n\\[\nR + sL\n\\]\n\nSo the circuit behaves like a **resistor in series with an inductor**, with approximately\n\n\\[\nR_{eq}\\approx \\frac{1}{g_{m1}}, \\qquad\nL_{eq}\\approx \\frac{C_{gs1}}{g_{m1}^2}(g_{m1}R_S-1)\n\\approx \\frac{R_SC_{gs1}}{g_{m1}}\n\\]\n\nif \\(g_{m1}R_S \\gg 1\\).\n\n## Role of \\(M_2\\)\n\\(M_2\\) mainly provides the **bias current**. Its finite output resistance just shunts the effect and lowers the \\(Q\\), but the inductive behavior comes from:\n\n- \\(g_{m1}\\)\n- \\(C_{gs1}\\)\n- the finite gate resistance \\(R_S\\)\n\nSo this is an **active inductor** effect: no physical inductor is present, but the small-signal output impedance can still be inductive.",
        "format": "markdown",
        "sha256": "ac1b2f080777cdf418d3d057e94b48611edafe8ba385e76007e013e7ea466532"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the output impedance, identifies the gate–source capacitance and RS feedback mechanism, and gives the right inductive condition RS > 1/gm1 and equivalent series inductance. The omitted explicit high-frequency limit is implicit in the correct expression.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 15032,
        "total_tokens": 16622,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14261,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 15032,
        "total_tokens": 16622,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14261,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Set the independent inputs to ac ground to look at \\(Z_{out}\\). Then:\n\n- \\(V_{in}=0\\) makes the gate of \\(M_1\\) connected to ac ground through \\(R_S\\).\n- \\(M_2\\) mainly provides bias, so its small-signal effect is mostly a large resistance in parallel.\n\nThe key point is that \\(M_1\\) is a source follower, and its gate-source capacitance \\(C_{gs1}\\) couples \\(v_{out}\\) back to the gate. Because the gate returns to ground through \\(R_S\\), that feedback is not instantaneous: the gate follows the source with an \\(R_S C_{gs1}\\) delay.\n\nSo a change in \\(v_{out}\\):\n\n1. perturbs \\(v_{gs1}\\),\n2. changes the transistor current through \\(g_{m1}v_{gs1}\\),\n3. but with a phase shift caused by \\(R_S\\) and \\(C_{gs1}\\).\n\nThat phase shift can make the output current lag the output voltage, which is exactly inductive behavior.\n\nIgnoring \\(r_o\\) for clarity, the small-signal output impedance is approximately\n\n\\[\nZ_{out}(s)\\approx \\frac{1+sR_SC_{gs1}}{g_{m1}+sC_{gs1}}.\n\\]\n\nFor low to moderate frequencies,\n\n\\[\nZ_{out}(s)\\approx \\frac{1}{g_{m1}}\n+ s\\,\\frac{C_{gs1}(g_{m1}R_S-1)}{g_{m1}^2}.\n\\]\n\nThis has the form\n\n\\[\nZ_{out} \\approx R + sL\n\\]\n\nwith\n\n\\[\nR \\approx \\frac{1}{g_{m1}},\\qquad\nL_{eq}\\approx \\frac{C_{gs1}(g_{m1}R_S-1)}{g_{m1}^2}.\n\\]\n\nSo if\n\n\\[\ng_{m1}R_S > 1,\n\\]\n\nthen \\(L_{eq}>0\\), and the output impedance has a positive imaginary part: it looks inductive.\n\nIn words: the capacitor \\(C_{gs1}\\) stores the energy, and the transistor transconductance “transforms” that capacitive effect into an apparent inductance at the output. So this is a synthetic, or active, inductance—not a physical coil.",
        "format": "markdown",
        "sha256": "b09411d5e5b769478a3c40980a830d6452d1391e7a9c5eb5198e6cc4bbfc9195"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower, gives the correct output-impedance expression and inductive condition, and explains the relevant gate-source-capacitance feedback. This satisfies the full-credit rule.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 13944,
        "total_tokens": 15534,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13425,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 13944,
        "total_tokens": 15534,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13425,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Set the independent input to zero to evaluate \\(Z_{out}\\), so \\(V_{in}\\) is AC ground through \\(R_s\\). Also, \\(M_2\\) mainly provides bias current, so if its \\(r_o\\) is large, the output is dominated by looking into the **source of \\(M_1\\)**.\n\nWhy it can look inductive:\n\n- \\(M_1\\) has a gate-source capacitance \\(C_{gs}\\).\n- A small signal at \\(V_{out}\\) couples through \\(C_{gs}\\) to the gate.\n- But the gate is not an ideal AC ground; it is tied to ground through \\(R_s\\).\n- So the gate voltage moves with a **delay** set by \\(R_sC_{gs}\\).\n- That delayed gate motion modulates \\(v_{gs}\\), hence the transistor current \\(g_mv_{gs}\\).\n- As a result, the output current does not respond instantly to output voltage; it **lags** it, which is the signature of an inductive impedance.\n\nUsing a small-signal model (neglecting \\(r_o\\), \\(C_{gd}\\), etc.):\n\n\\[\nv_g=\\frac{sR_sC_{gs}}{1+sR_sC_{gs}}\\,v_{out}\n\\]\n\nand the small-signal current drawn at the source is\n\n\\[\ni_{out}=(g_m+sC_{gs})(v_{out}-v_g)\n\\]\n\nSo\n\n\\[\nZ_{out}\\approx \\frac{v_{out}}{i_{out}}\n= \\frac{1+sR_sC_{gs}}{g_m+sC_{gs}}\n\\]\n\nFor frequencies where \\(\\omega \\ll g_m/C_{gs}\\),\n\n\\[\nZ_{out}\\approx \\frac{1}{g_m}+sL_{eq}\n\\]\n\nwith\n\n\\[\nL_{eq}\\approx \\frac{C_{gs}}{g_m}\\left(R_s-\\frac{1}{g_m}\\right)\n\\approx \\frac{R_sC_{gs}}{g_m}\n\\quad (\\text{if } g_mR_s\\gg 1)\n\\]\n\nThat is a **resistor in series with an inductor**.\n\nSo the circuit behaves like an **active inductor**: the combination of \\(g_m\\), \\(C_{gs}\\), and \\(R_s\\) synthesizes an inductive output impedance over a certain frequency range. M2 just biases the stage and should have a large output resistance so it doesn’t spoil the effect.",
        "format": "markdown",
        "sha256": "ca86c230c8a0aabddcd99baccc5b3fba811bace21ebad5dee1fda6f24750899d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower output path and derives the correct impedance. The Cgs–Rs feedback produces a positive inductive term when Rs exceeds 1/gm; the stated large-gmRs approximation captures that condition.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 13287,
        "total_tokens": 14877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 13287,
        "total_tokens": 14877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are nMOS transistors.\n\n## 1) What the circuit is\n\nThis is a **cross-coupled positive-feedback** stage:\n\n- \\(M_1\\): common-source device with load \\(R_{D1}\\), so it converts \\(V_X\\) into \\(V_{out}\\).\n- \\(M_2\\): its gate is driven by \\(V_{out}\\), and it sinks current from node \\(X\\).\n\nBecause the gate of \\(M_1\\) draws essentially no dc current,\n\n\\[\nI_{in}=I_{D2}\n\\]\n\nand at the output node,\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_{D1}}=I_{D1}.\n\\]\n\nSo the operating point is set by these two equations.\n\n---\n\n## 2) Why the feedback is positive\n\nA small increase in \\(V_X\\) causes:\n\n1. \\(M_1\\) current to increase,\n2. \\(V_{out}\\) to decrease,\n3. \\(M_2\\) gate voltage to decrease,\n4. \\(M_2\\) current to decrease,\n5. so less current is removed from node \\(X\\),\n6. therefore \\(V_X\\) rises even more.\n\nSo:\n\n\\[\nV_X \\uparrow \\;\\Rightarrow\\; V_{out}\\downarrow \\;\\Rightarrow\\; I_{D2}\\downarrow \\;\\Rightarrow\\; V_X\\uparrow\n\\]\n\nThis is **regeneration**.\n\n---\n\n## 3) Small-signal analysis\n\nLinearizing about a bias point:\n\n### Output node\n\\[\nv_{out}=-\\frac{g_{m1}}{g_{o1}+1/R_{D1}}\\,v_x\n\\]\nor\n\\[\nv_{out}=-g_{m1}(R_{D1}\\parallel r_{o1})\\,v_x.\n\\]\n\n### Input node \\(X\\)\nThe current through \\(M_2\\) is\n\\[\ni_{d2}=g_{o2}v_x+g_{m2}v_{out}.\n\\]\n\nSince \\(i_{in}=i_{d2}\\),\n\\[\ni_{in}=\\left[g_{o2}-g_{m1}g_{m2}(R_{D1}\\parallel r_{o1})\\right]v_x.\n\\]\n\nHence the incremental input resistance is\n\n\\[\nr_{in}=\\frac{v_x}{i_{in}}\n=\\frac{1}{g_{o2}-g_{m1}g_{m2}(R_{D1}\\parallel r_{o1})}.\n\\]\n\n### Key result\n- If\n  \\[\n  g_{o2}>g_{m1}g_{m2}(R_{D1}\\parallel r_{o1}),\n  \\]\n  then \\(r_{in}>0\\): the circuit can behave like a finite-gain transimpedance stage.\n\n- If\n  \\[\n  g_{o2}<g_{m1}g_{m2}(R_{D1}\\parallel r_{o1}),\n  \\]\n  then \\(r_{in}<0\\): the operating point is **regenerative/unstable**.\n\nSo this circuit can show **negative differential resistance**.\n\n---\n\n## 4) Large-signal behavior\n\nUsing long-channel MOS equations:\n\n- \\(M_1\\) is controlled by \\(V_X\\)\n- \\(M_2\\) is controlled by \\(V_{out}\\)\n\nThe important operating regions are:\n\n### A. High-output state\n- \\(V_{out}\\approx V_{DD}\\)\n- \\(M_2\\) is strongly on, often in **triode**\n- \\(M_1\\) is off or only weakly on\n\nThen \\(M_2\\) acts like a resistor/current sink at node \\(X\\), so the input current is shunted and \\(V_X\\) stays low.\n\n### B. Regenerative transition\nAs \\(I_{in}\\) increases, \\(V_X\\) rises.\nEventually \\(M_1\\) starts pulling \\(V_{out}\\) down, which weakens \\(M_2\\), which lets \\(V_X\\) rise more.\n\nOnce that positive feedback dominates, the circuit **switches abruptly**.\n\n### C. Low-output state\nAfter switching:\n- \\(M_1\\) is strong\n- \\(V_{out}\\) is low\n- \\(M_2\\) is weak, typically in **saturation** or near cutoff\n\nSo the circuit behaves like a **current-controlled latch / Schmitt-trigger-like cell**.\n\n---\n\n## 5) Approximate switching condition\n\nA rough upper switching estimate is obtained from the high-output state:\n\n- take \\(V_{out}\\approx V_{DD}\\)\n- switching starts when \\(V_X\\) becomes large enough to turn on \\(M_1\\), i.e. \\(V_X\\approx V_{T1}\\)\n\nThus\n\n\\[\nI_{sw}\\approx I_{D2}(V_{GS2}=V_{DD},\\,V_{DS2}\\approx V_{T1}).\n\\]\n\nIf \\(M_2\\) is still in triode there, then\n\n\\[\nI_{sw}\\approx\n\\beta_2\\left[(V_{DD}-V_{T2})V_{T1}-\\frac{V_{T1}^2}{2}\\right].\n\\]\n\nA more exact transition occurs near the boundary where \\(M_2\\) just leaves triode:\n\n\\[\nV_X \\approx V_{out}-V_{T2}.\n\\]\n\nSimilarly, the return transition occurs near the boundary where \\(M_1\\) just leaves triode:\n\n\\[\nV_{out} \\approx V_X-V_{T1}.\n\\]\n\nSo the dc transfer can be **S-shaped**, with an unstable middle branch.\n\n---\n\n## 6) Final conclusion\n\nThis circuit is **not a normal negative-feedback amplifier**. It is a **positive-feedback current-controlled switching circuit**.\n\n### Main properties\n- converts input current at node \\(X\\) into an output voltage\n- can exhibit **negative input resistance**\n- can become **bistable/regenerative**\n- behaves like a **current comparator / Schmitt-trigger-like element**\n\nFor small \\(I_{in}\\): \\(V_{out}\\) stays high.  \nWhen \\(I_{in}\\) exceeds a critical value: \\(V_{out}\\) snaps low due to regeneration.\n\nIf you want, I can also derive the **exact \\(V_{out}\\)–\\(I_{in}\\) transfer curve** case-by-case using the MOS square-law equations.",
        "format": "markdown",
        "sha256": "5560490c2dee140e7be431386976f3d4757b351f7716656735abe965523583a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection to Vout and the positive-feedback loop, derives the loop-modified input resistance, and notes negative resistance, instability, and latching. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 23973,
        "total_tokens": 26030,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22562,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 23973,
        "total_tokens": 26030,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22562,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(V_X\\) be the voltage at node \\(X\\), and \\(V_O \\equiv V_{out}\\).  \nAssume \\(M_1\\) and \\(M_2\\) are nMOS transistors with sources at ground.\n\n## 1) What the circuit is\n\n- \\(M_1\\) with \\(R_{D1}\\) is a **common-source stage**:\n  \\[\n  \\frac{V_{DD}-V_O}{R_{D1}} = I_{D1}\n  \\]\n- \\(M_2\\) senses \\(V_O\\) at its gate and sinks current from node \\(X\\):\n  \\[\n  I_{in}=I_{D2}\n  \\]\n\nSo the two node equations are\n\n\\[\nI_{in}=I_{D2}(V_{GS2}=V_O,\\;V_{DS2}=V_X)\n\\]\n\\[\n\\frac{V_{DD}-V_O}{R_{D1}}=I_{D1}(V_{GS1}=V_X,\\;V_{DS1}=V_O)\n\\]\n\nThis is a **cross-coupled positive-feedback** circuit.\n\n---\n\n## 2) MOS current equations\n\nUsing the long-channel square-law model,\n\n### For \\(M_1\\)\n- \\(V_{GS1}=V_X\\)\n- \\(V_{DS1}=V_O\\)\n\n### For \\(M_2\\)\n- \\(V_{GS2}=V_O\\)\n- \\(V_{DS2}=V_X\\)\n\nFor either transistor \\(k\\):\n- cutoff:\n  \\[\n  I_D=0,\\qquad V_{GS}<V_T\n  \\]\n- triode:\n  \\[\n  I_D=k\\!\\left[(V_{GS}-V_T)V_{DS}-\\frac{V_{DS}^2}{2}\\right]\n  \\]\n- saturation:\n  \\[\n  I_D=\\frac{k}{2}(V_{GS}-V_T)^2\n  \\]\n\n---\n\n## 3) Formal DC solution if both devices are in saturation\n\nIf both \\(M_1\\) and \\(M_2\\) are saturated,\n\n\\[\nI_{in}=\\frac{k_2}{2}(V_O-V_{T2})^2\n\\]\n\nso\n\n\\[\nV_O=V_{T2}+\\sqrt{\\frac{2I_{in}}{k_2}}\n\\]\n\nAlso,\n\n\\[\n\\frac{V_{DD}-V_O}{R_{D1}}=\\frac{k_1}{2}(V_X-V_{T1})^2\n\\]\n\nhence\n\n\\[\nV_X=V_{T1}+\\sqrt{\\frac{2(V_{DD}-V_O)}{k_1R_{D1}}}\n\\]\n\nwith saturation conditions\n\n\\[\nV_O \\ge V_X-V_{T1}, \\qquad V_X \\ge V_O-V_{T2}\n\\]\n\nSo a mathematical operating point exists.\n\n---\n\n## 4) But the key point: the loop is regenerative\n\nThe sign of the feedback is:\n\n\\[\nV_X \\uparrow\n\\;\\Rightarrow\\;\nI_{D1}\\uparrow\n\\;\\Rightarrow\\;\nV_O\\downarrow\n\\;\\Rightarrow\\;\nI_{D2}\\downarrow\n\\;\\Rightarrow\\;\nV_X\\uparrow\n\\]\n\nSo the loop is **positive feedback**.\n\nThat means the intermediate bias point is usually **unstable** or weakly stable only because of finite output resistance.\n\nA small-signal stability test gives roughly\n\n\\[\ng_{m1}g_{m2} \\; \\gtrsim \\; g_{ds2}\\left(g_{ds1}+\\frac{1}{R_{D1}}\\right)\n\\]\n\nand since normally \\(g_m \\gg g_{ds}\\), this condition tends to make the middle operating point unstable.  \nSo this circuit behaves more like a **regenerative comparator/latch** than a linear amplifier.\n\n---\n\n## 5) Practical operating behavior\n\n### For small \\(I_{in}\\)\n- \\(M_1\\) is off or weakly on\n- \\(V_O \\approx V_{DD}\\)\n- \\(M_2\\) is on and drains the input current\n\nWith \\(V_O \\approx V_{DD}\\), \\(M_2\\) is usually in triode:\n\n\\[\nI_{in}=k_2\\left[(V_{DD}-V_{T2})V_X-\\frac{V_X^2}{2}\\right]\n\\]\n\nAs \\(I_{in}\\) increases, \\(V_X\\) rises.\n\n### Switching point\nWhen \\(V_X\\) reaches \\(V_{T1}\\), \\(M_1\\) starts to turn on.  \nThat pulls \\(V_O\\) down, which weakens \\(M_2\\), so \\(V_X\\) rises even more: **regenerative switching**.\n\nApproximate threshold current:\n\n\\[\nI_{SW}\\approx\nk_2\\left[(V_{DD}-V_{T2})V_{T1}-\\frac{V_{T1}^2}{2}\\right]\n\\]\n\n---\n\n## 6) Interpretation\n\nSo the circuit is best understood as:\n\n- a **current-triggered regenerative inverter/comparator**\n- with \\(M_1\\) creating the output transition\n- and \\(M_2\\) providing positive feedback from output back to node \\(X\\)\n\n### Important practical note\nIf \\(V_O\\) falls enough to nearly turn \\(M_2\\) off, node \\(X\\) has little DC discharge path.  \nSo in an ideal model, \\(X\\) can keep charging from \\(I_{in}\\).  \nThat means a real implementation usually needs **reset/leakage/discharge** or relies on node capacitances for dynamic operation.\n\n---\n\n## Final summary\n\n- \\(M_1\\) + \\(R_{D1}\\) form a common-source output stage.\n- \\(M_2\\) senses \\(V_{out}\\) and removes current from node \\(X\\).\n- The cross-coupling gives **positive feedback**.\n- For low \\(I_{in}\\): \\(V_{out}\\approx V_{DD}\\).\n- When \\(I_{in}\\) exceeds a threshold, the circuit **switches regeneratively**.\n\nIf you want, I can also draw the **small-signal equivalent** or derive the **exact piecewise \\(V_{out}\\) vs. \\(I_{in}\\)** characteristic.",
        "format": "markdown",
        "sha256": "3865dee30ed52cb976fb0126ebfdc9eb109c9e1f75a77320c5dcc3be433ac5dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection to Vout, the positive-feedback loop through M1 and M2, and its regenerative/unstable behavior. This meets the golden solution’s full-credit rule; a precise input-resistance derivation is not required.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 19467,
        "total_tokens": 21524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18089,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 19467,
        "total_tokens": 21524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18089,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let  \n\n- \\(V_x\\) = voltage at node \\(X\\)  \n- \\(V_o\\equiv V_{out}\\)\n\nAssume \\(M_1\\) and \\(M_2\\) are NMOS, sources at ground, gate current \\(\\approx 0\\), and use the long-channel square-law model.\n\n## 1) What the circuit is\n\n- \\(M_1\\) with \\(R_{D1}\\) is a resistor-loaded common-source stage.\n- \\(M_2\\) feeds the output voltage back to node \\(X\\).\n\nSo this is a **positive-feedback regenerative circuit**.\n\nWhy positive feedback?\n\n- If \\(V_o\\) goes down, \\(M_2\\) gets weaker (\\(V_{GS2}=V_o\\) decreases).\n- Then, for the same \\(I_{in}\\), node \\(X\\) must rise.\n- A higher \\(V_x\\) turns \\(M_1\\) on harder.\n- That pulls \\(V_o\\) down even more.\n\nSo \\(V_o\\downarrow \\Rightarrow V_x\\uparrow \\Rightarrow M_1\\) stronger \\(\\Rightarrow V_o\\downarrow\\): regenerative action.\n\n---\n\n## 2) DC equations\n\nSince MOS gates draw essentially no dc current:\n\n### Node \\(X\\)\nAll of \\(I_{in}\\) must go through \\(M_2\\):\n\\[\nI_{in}=I_{D2}\n\\]\n\n### Output node\nCurrent through the resistor equals current in \\(M_1\\):\n\\[\n\\frac{V_{DD}-V_o}{R_{D1}}=I_{D1}\n\\]\n\nUsing the MOS equations:\n\n\\[\nI_D=\n\\begin{cases}\n\\beta\\left[(V_{GS}-V_T)V_{DS}-\\dfrac{V_{DS}^2}{2}\\right], & \\text{triode}\\\\[6pt]\n\\dfrac{\\beta}{2}(V_{GS}-V_T)^2, & \\text{saturation}\n\\end{cases}\n\\]\n\nwith \\(\\beta_i=\\mu_n C_{ox}(W/L)_i\\).\n\nFor this circuit:\n\n- \\(M_1:\\quad V_{GS1}=V_x,\\; V_{DS1}=V_o\\)\n- \\(M_2:\\quad V_{GS2}=V_o,\\; V_{DS2}=V_x\\)\n\n---\n\n## 3) Low-input-current state\n\nFor small \\(I_{in}\\):\n\n- \\(M_1\\) is OFF because \\(V_x<V_{T1}\\)\n- so \\(V_o \\approx V_{DD}\\)\n\nThen \\(M_2\\) alone carries the input current. With \\(V_o=V_{DD}\\), \\(M_2\\) is usually in triode, so:\n\n\\[\nI_{in}=\\beta_2\\left[(V_{DD}-V_{T2})V_x-\\frac{V_x^2}{2}\\right]\n\\]\n\nFor very small \\(I_{in}\\),\n\\[\nV_x \\approx \\frac{I_{in}}{\\beta_2 (V_{DD}-V_{T2})}\n\\]\nso node \\(X\\) stays low and the output remains high.\n\n---\n\n## 4) When does switching begin?\n\n\\(M_1\\) starts to conduct when \\(V_x \\approx V_{T1}\\).\n\nThat gives a first estimate of the input current at which the transition starts:\n\n\\[\nI_{th}\\approx\n\\beta_2\\left[(V_{DD}-V_{T2})V_{T1}-\\frac{V_{T1}^2}{2}\\right]\n\\]\n\nIf the two MOSFETs are identical \\((V_{T1}=V_{T2}=V_T)\\),\n\n\\[\nI_{th}\\approx\n\\beta_2\\left[(V_{DD}-V_T)V_T-\\frac{V_T^2}{2}\\right]\n\\]\n\n---\n\n## 5) Transition region\n\nOnce \\(M_1\\) turns on, \\(V_o\\) drops. That weakens \\(M_2\\), which forces \\(V_x\\) higher, which turns on \\(M_1\\) harder. This is the regenerative part.\n\nIf \\(M_1\\) is in saturation and \\(M_2\\) is still in triode, then\n\n\\[\nV_o = V_{DD}-\\frac{\\beta_1R_{D1}}{2}(V_x-V_{T1})^2\n\\]\n\nand\n\n\\[\nI_{in}=\\beta_2\\left[(V_o-V_{T2})V_x-\\frac{V_x^2}{2}\\right]\n\\]\n\nCombining:\n\n\\[\nI_{in}(V_x)=\n\\beta_2\\left[\n\\left(V_{DD}-V_{T2}-\\frac{\\beta_1R_{D1}}{2}(V_x-V_{T1})^2\\right)V_x\n-\\frac{V_x^2}{2}\n\\right]\n\\]\n\nThis is the large-signal transfer relation in the transition region.\n\n---\n\n## 6) Small-signal insight: negative resistance / regeneration\n\nAround an operating point, the feedback can make the input look like a **negative resistance**.\n\nIf \\(M_1\\) is saturated and \\(r_{o1}\\) is neglected, then\n\n\\[\nv_o \\approx -g_{m1}R_{D1}\\,v_x\n\\]\n\nand at node \\(X\\),\n\n\\[\ni_{in}=g_{ds2}v_x+g_{m2}v_o\n\\]\n\nSo,\n\n\\[\ni_{in}=\\left(g_{ds2}-g_{m1}g_{m2}R_{D1}\\right)v_x\n\\]\n\nHence the incremental input resistance seen at \\(X\\) is\n\n\\[\nr_{in}=\\frac{v_x}{i_{in}}\n=\\frac{1}{g_{ds2}-g_{m1}g_{m2}R_{D1}}\n\\]\n\nSo if\n\n\\[\ng_{m1}g_{m2}R_{D1} > g_{ds2}\n\\]\n\nthe input resistance becomes **negative**, which means strong regenerative behavior and possible abrupt switching/hysteresis.\n\nMore generally, including \\(r_{o1}\\),\n\n\\[\ng_{m1}g_{m2}=g_{ds2}\\left(\\frac{1}{R_{D1}}+g_{ds1}\\right)\n\\]\n\nis the boundary between stable and regenerative behavior.\n\n---\n\n## 7) Interpretation\n\nSo the circuit behaves like a **current-controlled regenerative switch / comparator**:\n\n- For small \\(I_{in}\\): \\(V_o \\approx V_{DD}\\)\n- As \\(I_{in}\\) increases: \\(V_x\\) rises\n- When \\(M_1\\) begins to turn on, the feedback through \\(M_2\\) accelerates the change\n- The output can drop sharply, and with real device \\(r_o\\) the circuit can show an S-shaped transfer and hysteresis\n\n## Final summary\n\nThe key equations are:\n\n\\[\nI_{in}=I_{D2}(V_o,V_x), \\qquad \\frac{V_{DD}-V_o}{R_{D1}}=I_{D1}(V_x,V_o)\n\\]\n\nand the key idea is:\n\n**\\(M_1\\) and \\(M_2\\) form a positive-feedback loop, so the circuit is regenerative rather than a simple linear amplifier.**\n\nIf you want, I can also draw the piecewise \\(V_{out}\\)–\\(I_{in}\\) characteristic or solve it for matched transistors \\((\\beta_1=\\beta_2,\\;V_{T1}=V_{T2})\\).",
        "format": "markdown",
        "sha256": "3cb9e79ae1e4c543b334eba02ac2e71756debd917246a1c8711dfc736f6c0821"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2 is controlled by Vout, explains the positive-feedback loop, and derives a negative incremental input resistance as a regenerative consequence. These satisfy the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 31570,
        "total_tokens": 33627,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29910,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 31570,
        "total_tokens": 33627,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29910,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume a **low-frequency small-signal** analysis, with both MOSFETs in saturation, and \\(V_{DD}\\) and \\(V_b\\) treated as AC ground.\n\nLet\n\n- \\(v_s\\): source-node voltage of \\(M_1\\)\n- \\(v_x\\): node \\(X\\)\n- \\(v_o \\equiv v_{out}\\)\n\n## 1) What this circuit is\n\nThis is a **current-to-voltage (transimpedance) amplifier** with **shunt-shunt negative feedback**.\n\n- \\(M_1\\): **common-gate** stage  \n- \\(M_2\\): **common-source** stage  \n- \\(R_F\\): feedback resistor from output to input node\n\nBecause the forward path from \\(v_s\\) to \\(v_o\\) is **inverting**, the resistor feedback is **negative**.\n\n---\n\n## 2) Small-signal stage relations\n\n### First stage: \\(M_1\\)\nIgnoring \\(r_o\\) first,\n\n\\[\nv_x = g_{m1} R_{D1}\\, v_s\n\\]\n\nSo \\(M_1\\) gives a **positive** voltage gain from source to drain.  \nIts input resistance is approximately\n\n\\[\nR_{in,\\,M1} \\approx \\frac{1}{g_{m1}}\n\\]\n\n(or \\(1/(g_{m1}+g_{mb1})\\) if body effect is included).\n\n### Second stage: \\(M_2\\)\nWith \\(R_F\\) connected, KCL at the output gives\n\n\\[\n\\frac{v_o}{R_{D2}} + g_{m2}v_x + \\frac{v_o-v_s}{R_F}=0\n\\]\n\nAt the input node,\n\n\\[\ni_{in}=g_{m1}v_s+\\frac{v_s-v_o}{R_F}\n\\]\n\nAnd since \\(v_x=g_{m1}R_{D1}v_s\\), you can solve for \\(v_o/i_{in}\\).\n\n---\n\n## 3) Closed-loop transimpedance\n\nWith the above assumptions, the exact low-frequency small-signal result is\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}=\n\\frac{R_{D2}\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)}\n{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\nThis is the **transimpedance gain**.\n\nAlso, the small-signal input resistance is\n\n\\[\n\\boxed{\nR_{in}\\equiv \\frac{v_s}{i_{in}}=\n\\frac{R_F+R_{D2}}\n{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\nSo the input node is low impedance, which is typical for a current-input stage.\n\n---\n\n## 4) Important high-gain limit\n\nIf the internal gain is large, i.e.\n\n\\[\ng_{m1}g_{m2}R_{D1}R_{D2} \\gg 1\n\\]\n\nthen the source node becomes nearly a **virtual ground** in the small-signal sense, and the circuit simplifies to\n\n\\[\n\\boxed{v_o \\approx -\\,i_{in}R_F}\n\\]\n\nSo the circuit behaves like an ideal transimpedance amplifier whose gain is set mainly by **\\(R_F\\)**.\n\n### Interpretation\n- Positive \\(i_{in}\\) (upward as drawn) makes \\(v_o\\) move **down**\n- Hence the transimpedance is **negative**\n- The exact transistor parameters mainly affect how closely the circuit approaches the ideal value \\(-R_F\\)\n\n---\n\n## 5) Open-loop intuition\n\nIf you temporarily remove \\(R_F\\), the forward amplifier has approximately\n\n- open-loop input resistance:\n  \\[\n  R_{in,0}\\approx \\frac{1}{g_{m1}}\n  \\]\n\n- open-loop transimpedance:\n  \\[\n  \\boxed{\n  R_{m0}\\approx -g_{m2}R_{D1}R_{D2}\n  }\n  \\]\n\nSo:\n- \\(M_1\\) mainly provides **low input resistance**\n- \\(M_2\\) provides **gain**\n- \\(R_F\\) sets the **closed-loop current-to-voltage conversion**\n\n---\n\n## 6) More accurate first-order refinement\n\nIf channel-length modulation is included, a good first correction is:\n\n- replace \\(R_{D1}\\) by \\(R_{D1}\\parallel r_{o1}\\)\n- replace \\(R_{D2}\\) by \\(R_{D2}\\parallel r_{o2}\\)\n- replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\) if body effect matters\n\nThen the same conclusions still hold:\n\n\\[\nv_o \\approx -i_{in}R_F\n\\quad\\text{for sufficiently large loop gain}\n\\]\n\n---\n\n## 7) Final conclusion\n\nThis circuit is a **feedback transimpedance amplifier**.\n\n### Main results\n\\[\n\\boxed{\\text{Forward path gain } \\approx -g_{m1}g_{m2}R_{D1}R_{D2}}\n\\]\n\n\\[\n\\boxed{\\frac{v_o}{i_{in}} \\approx -R_F \\quad \\text{(high-gain limit)}}\n\\]\n\n\\[\n\\boxed{R_{in}\\ \\text{is small}}\n\\]\n\nSo the circuit converts the input current into an output voltage, with the conversion factor set primarily by the feedback resistor.\n\nIf you want, I can also derive the result using a **feedback block-diagram approach** or include **\\(r_o\\)** explicitly in the nodal equations.",
        "format": "markdown",
        "sha256": "d3f263094ba39c1227bc6c65a0e21202f6b7c866a344e646a2478e41c7b2aa76"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as output-to-input negative feedback. The transimpedance and low-input-resistance conclusions are also consistent with the circuit.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 27689,
        "total_tokens": 29967,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 27689,
        "total_tokens": 29967,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume **small-signal operation** about the bias point, with both MOSFETs in saturation and \\(r_o\\) neglected.\n\n### 1) What this circuit is\n- \\(M_1\\): **common-gate** input device  \n- \\(M_2\\): **common-source** gain stage  \n- \\(R_F\\): feeds the output voltage back as a current to the input node\n\nSo this is a **shunt-shunt negative-feedback transimpedance amplifier**: it converts input current to output voltage.\n\n---\n\n## 2) Small-signal relations\n\nLet\n- \\(v_s\\): small-signal voltage at the source of \\(M_1\\) (input node)\n- \\(v_x\\): voltage at node \\(X\\)\n- \\(v_o\\): output voltage\n\nSince \\(V_{DD}\\) and \\(V_b\\) are ac grounds:\n\n### Stage 1: \\(M_1\\)\n\\[\nv_x = g_{m1}R_{D1}v_s\n\\]\n\n### Stage 2 + output node\nKCL at the output gives\n\\[\n\\frac{v_o}{R_{D2}}+\\frac{v_o-v_s}{R_F}+g_{m2}v_x=0\n\\]\n\nSubstitute \\(v_x\\):\n\\[\n\\frac{v_o}{v_s}\n=\n\\frac{R_{D2}}{R_{D2}+R_F}\n-\ng_{m1}g_{m2}R_{D1}(R_{D2}\\parallel R_F)\n\\]\n\nUsually the second term dominates, so the overall forward gain from \\(v_s\\) to \\(v_o\\) is negative.\n\n### Input-node KCL\n\\[\ni_{in}=g_{m1}v_s+\\frac{v_s-v_o}{R_F}\n\\]\n\n---\n\n## 3) Closed-loop transimpedance\n\nSolving for \\(v_o/i_{in}\\):\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}\n=\n\\frac{R_{D2}\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)}\n{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\nThis is the small-signal transimpedance.\n\n---\n\n## 4) Useful high-gain approximation\n\nIf the forward gain is large, i.e.\n\\[\ng_{m1}g_{m2}R_{D1}(R_F\\parallel R_{D2}) \\gg 1\n\\]\n\nthen the input node becomes nearly a **virtual ground** \\((v_s \\approx 0)\\), and\n\n\\[\n\\boxed{v_o \\approx -\\,i_{in}R_F}\n\\]\n\nSo the circuit behaves like an **inverting current-to-voltage converter** with transimpedance approximately equal to \\(-R_F\\).\n\n---\n\n## 5) Input resistance\n\nFrom the equations above,\n\n\\[\n\\boxed{\nR_{in}=\\frac{v_s}{i_{in}}\n=\n\\frac{R_F+R_{D2}}\n{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\nFor large gain,\n\\[\nR_{in}\\ \\text{is very small}\n\\]\nwhich is exactly what you want for a current-input amplifier.\n\n---\n\n## 6) Physical interpretation\n\nIf \\(i_{in}\\) increases:\n1. \\(v_s\\) tends to rise\n2. \\(M_1\\) makes \\(v_x\\) rise\n3. \\(M_2\\) draws more current\n4. \\(v_o\\) falls\n5. Through \\(R_F\\), this produces a feedback current opposing the input current\n\nHence the feedback is **negative**.\n\n---\n\n## 7) Main result\n\n### Exact small-signal result:\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}\n=\n\\frac{R_{D2}\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)}\n{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\n### Most important design result:\n\\[\n\\boxed{v_o \\approx -i_{in}R_F}\n\\qquad\\text{(for large loop gain)}\n\\]\n\nIf you want, I can also derive the same result using **feedback theory** (\\(A\\beta\\)) and identify the loop gain explicitly.",
        "format": "markdown",
        "sha256": "35f81bcbc5ea5d4e5b7074272992a1efe368d1065fec13eefcc3fb84f746e84f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input node. The transimpedance and input-resistance results are consistent with the stated small-signal assumptions; the high-loop-gain limit is approximately −RF.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 29459,
        "total_tokens": 31737,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28445,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 29459,
        "total_tokens": 31737,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28445,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume small-signal operation, both MOSFETs in saturation, \\(r_o\\) neglected, and \\(V_{DD}\\) and \\(V_b\\) are ac grounds.\n\n### 1) What the circuit is\nThis is a **transimpedance amplifier** (current-to-voltage converter) with **negative shunt-shunt feedback** through \\(R_F\\).\n\n- \\(M_1\\): common-gate input device  \n- \\(R_{D1}\\): converts the current variation of \\(M_1\\) into voltage at node \\(X\\)  \n- \\(M_2\\): common-source gain stage  \n- \\(R_{D2}\\): converts \\(M_2\\) drain current into output voltage  \n- \\(R_F\\): feeds output back to the input node as a current\n\n---\n\n### 2) Signal flow / polarity\nLet the source node of \\(M_1\\) be \\(v_s\\).\n\nFor a positive input current \\(i_{in}\\):\n\n1. \\(v_s\\) tends to increase.\n2. Since \\(M_1\\) is common-gate,\n   \\[\n   v_X \\approx +g_{m1}R_{D1}v_s\n   \\]\n3. \\(M_2\\) is common-source, so\n   \\[\n   v_{out}\\approx -g_{m2}R_{D2}v_X\n   \\]\nHence,\n\\[\n\\frac{v_{out}}{v_s}\\approx -g_{m1}g_{m2}R_{D1}R_{D2}\n\\]\nSo the forward path is **inverting**, which makes the resistor feedback **negative**.\n\n---\n\n### 3) Open-loop transresistance\nBecause \\(M_1\\) is common-gate, the input current is transferred to its drain with approximately unity current gain. Thus the forward amplifier has transresistance magnitude\n\n\\[\nR_M \\approx g_{m2}R_{D1}R_{D2}\n\\]\n\nwith sign inversion:\n\n\\[\nv_{out}\\approx -R_M\\, i_e\n\\]\n\nwhere \\(i_e\\) is the net current entering the summing node.\n\n---\n\n### 4) Closed-loop gain\nThe feedback current is approximately\n\n\\[\ni_f \\approx \\frac{v_{out}}{R_F}\n\\]\n\n(negative for positive \\(i_{in}\\), since \\(v_{out}<0\\)).\n\nSo the summing-node current is\n\n\\[\ni_e = i_{in}+i_f\n\\]\n\nand therefore\n\n\\[\nv_{out} = -R_M\\left(i_{in}+\\frac{v_{out}}{R_F}\\right)\n\\]\n\nwhich gives\n\n\\[\n\\boxed{\\frac{v_{out}}{i_{in}} \\approx -\\frac{R_M}{1+R_M/R_F}}\n\\]\n\nor\n\n\\[\n\\boxed{\\frac{v_{out}}{i_{in}} \\approx -\\frac{g_{m2}R_{D1}R_{D2}\\,R_F}{g_{m2}R_{D1}R_{D2}+R_F}}\n\\]\n\nIf you also keep the finite input resistance of \\(M_1\\), \\(r_{in1}\\approx 1/g_{m1}\\), a better approximation is\n\n\\[\n\\boxed{\\frac{v_{out}}{i_{in}} \\approx -\\frac{R_MR_F}{R_M+R_F+1/g_{m1}}}\n\\]\n\n---\n\n### 5) Large loop-gain limit\nIf\n\n\\[\nR_M \\gg R_F\n\\]\n\nthen\n\n\\[\n\\boxed{v_{out}\\approx -i_{in}R_F}\n\\]\n\nSo the output is set mainly by \\(R_F\\), not by transistor parameters.\n\nThis is the key result: the circuit behaves like a **current-to-voltage converter** with transimpedance approximately \\(-R_F\\).\n\n---\n\n### 6) Input resistance\nWithout feedback, the input resistance of the common-gate stage is about\n\n\\[\nR_{in,0}\\approx \\frac{1}{g_{m1}}\n\\]\n\nWith feedback, it is reduced roughly by \\(1+T\\), where\n\n\\[\nT \\approx \\frac{R_M}{R_F}=\\frac{g_{m2}R_{D1}R_{D2}}{R_F}\n\\]\n\nSo\n\n\\[\n\\boxed{R_{in}\\approx \\frac{1/g_{m1}}{1+g_{m2}R_{D1}R_{D2}/R_F}}\n\\]\n\nThus the input node is a **low-impedance summing node** (almost a virtual ground for signal).\n\n---\n\n### 7) Feedback current\nFor large loop gain, almost all of the input current is balanced by the feedback current:\n\n\\[\n|i_{RF}| \\approx i_{in}\n\\]\n\nWith the arrow direction shown in the figure (from output to input), \\(i_{RF}\\) is actually negative for a positive \\(i_{in}\\), i.e. the real current flows from the input node toward the output through \\(R_F\\).\n\n---\n\n### Final interpretation\n- The circuit is a **negative-feedback transimpedance amplifier**.\n- \\(M_1\\) provides low input resistance.\n- \\(M_2\\) provides voltage gain.\n- \\(R_F\\) sets the closed-loop current-to-voltage gain.\n\nSo the main result is:\n\n\\[\n\\boxed{v_{out} \\approx -\\,R_F\\, i_{in}}\n\\qquad \\text{(for sufficiently large loop gain)}\n\\]\n\nIf you want, I can also give the **exact nodal small-signal solution** including the loading effect of \\(R_F\\) on the output node.",
        "format": "markdown",
        "sha256": "988baa74b4740b99e4300a5f84fa2a495b8333de612a38423dca68b5138a1cfb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input node, forming a transimpedance amplifier. The stated high-loop-gain result, vout/iin ≈ −RF, is also correct.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 28688,
        "total_tokens": 30966,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27452,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 28688,
        "total_tokens": 30966,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27452,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the devices are as drawn:\n\n- \\(M_1\\): NMOS, gate biased at \\(V_b\\)\n- \\(M_2\\): PMOS, source at \\(V_{DD}\\)\n- the lower unlabeled source is a bias sink; call it \\(I_2\\)\n- both MOSFETs operate in saturation\n- \\(V_{out}\\) is unloaded or lightly loaded\n\nLet the lower internal node be \\(V_x\\).\n\n## 1) What the circuit does\n\nThis is a **local-feedback current-to-voltage stage** (FVF-like cell).\n\n- \\(M_1\\) is a common-gate NMOS.\n- \\(M_2\\) feeds current from \\(V_{DD}\\) into node \\(V_x\\).\n- The gate of \\(M_2\\) is driven by \\(V_{out}\\), so changes at \\(V_x\\) are corrected by feedback through \\(M_2\\).\n\nThe feedback tends to keep \\(V_x\\) almost constant, while \\(V_{out}\\) moves to absorb changes in \\(I_{in}\\).\n\n---\n\n## 2) DC analysis\n\n### At node \\(V_{out}\\)\nThe gate of \\(M_2\\) draws no DC current, so KCL gives\n\n\\[\nI_{D1}=I_1\n\\]\n\nThus \\(M_1\\)'s current is fixed by \\(I_1\\), and its source voltage is approximately fixed:\n\n\\[\nV_x \\approx V_b - V_{GS1}(I_1)\n\\]\n\nFor long-channel square-law MOS:\n\n\\[\nI_1=\\frac{\\beta_1}{2}(V_b-V_x-V_{TN})^2\n\\]\n\nso\n\n\\[\nV_x = V_b - V_{TN} - \\sqrt{\\frac{2I_1}{\\beta_1}}\n\\]\n\nSo the lower node is a nearly constant-voltage, low-impedance node.\n\n---\n\n### At node \\(V_x\\)\nKCL gives\n\n\\[\nI_2 = I_{in} + I_1 + I_{D2}\n\\]\n\nhence\n\n\\[\nI_{D2}=I_2-I_1-I_{in}\n\\]\n\nFor PMOS \\(M_2\\),\n\n\\[\nI_{D2}=\\frac{\\beta_2}{2}(V_{SG2}-|V_{TP}|)^2\n\\]\n\nwith\n\n\\[\nV_{SG2}=V_{DD}-V_{out}\n\\]\n\nTherefore\n\n\\[\nI_2-I_1-I_{in}\n=\n\\frac{\\beta_2}{2}(V_{DD}-V_{out}-|V_{TP}|)^2\n\\]\n\nand\n\n\\[\n\\boxed{\nV_{out}\n=\nV_{DD}-|V_{TP}|-\\sqrt{\\frac{2(I_2-I_1-I_{in})}{\\beta_2}}\n}\n\\]\n\nSo, for the current directions shown, **increasing \\(I_{in}\\) makes \\(V_{out}\\) increase**.\n\n---\n\n## 3) Small-signal result\n\nSince \\(I_1\\) fixes the current of \\(M_1\\), the lower node \\(V_x\\) is held almost constant:\n\n\\[\nv_x \\approx 0\n\\]\n\nSo a small change in input current must be balanced by an equal and opposite change in \\(M_2\\) current:\n\n\\[\n\\Delta i_{D2} = -\\Delta i_{in}\n\\]\n\nFor the PMOS,\n\n\\[\n\\Delta i_{D2} = -g_{m2}\\,\\Delta v_{out}\n\\]\n\nThus\n\n\\[\n-g_{m2}\\Delta v_{out} = -\\Delta i_{in}\n\\]\n\nso\n\n\\[\n\\boxed{\n\\frac{\\Delta v_{out}}{\\Delta i_{in}} \\approx \\frac{1}{g_{m2}}\n}\n\\]\n\nThis is the key result: the circuit behaves as a **current-to-voltage converter** with transimpedance about\n\n\\[\n\\boxed{Z_t \\approx \\frac{1}{g_{m2}}}\n\\]\n\n---\n\n## 4) Input-node impedance\n\nBecause of the feedback loop, the lower node \\(V_x\\) has low small-signal resistance.\n\nWith nonideal output resistance included, approximately\n\n\\[\nR_x \\approx \\frac{1}{g_{o2}+g_{m2}\\left[1+g_{m1}(r_{o1}\\parallel r_{o,I1})\\right]}\n\\]\n\nand if intrinsic gains are large,\n\n\\[\n\\boxed{\nR_x \\approx \\frac{1}{g_{m1}g_{m2}(r_{o1}\\parallel r_{o,I1})}\n}\n\\]\n\nSo \\(V_x\\) is a **low-impedance current-input node**.\n\n---\n\n## 5) Intuitive feedback action\n\nIf \\(I_{in}\\) increases:\n\n1. node \\(V_x\\) tends to rise,\n2. \\(M_1\\) current tends to fall,\n3. since \\(I_1\\) is fixed, \\(V_{out}\\) rises,\n4. higher \\(V_{out}\\) reduces PMOS \\(M_2\\) current,\n5. that counteracts the disturbance and keeps \\(V_x\\) nearly constant.\n\nSo the circuit uses **negative feedback** to regulate \\(V_x\\).\n\n---\n\n## Final summary\n\n- \\(M_1\\) and \\(I_1\\) fix the lower node voltage \\(V_x\\).\n- \\(M_2\\) converts current imbalance at \\(V_x\\) into an output voltage \\(V_{out}\\).\n- Large-signal:\n  \\[\n  V_{out}=V_{DD}-|V_{TP}|-\\sqrt{\\frac{2(I_2-I_1-I_{in})}{\\beta_2}}\n  \\]\n- Small-signal:\n  \\[\n  \\boxed{\\Delta V_{out} \\approx \\frac{\\Delta I_{in}}{g_{m2}}}\n  \\]\n- The lower node is low impedance due to local feedback.\n\nIf you want, I can also draw the small-signal equivalent and derive the \\(1/g_{m2}\\) result step by step.",
        "format": "markdown",
        "sha256": "8706db2a8f96847968d4ed183b88f8b6d5fb9d8504425c250803dbb24714dd9f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies M1 as the common-gate NMOS, M2 as the PMOS feedback device driven by Vout, and the feedback path to the input node. It also gives the low-input-impedance and approximately 1/gm2 transimpedance result, satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 24529,
        "total_tokens": 26696,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23206,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 24529,
        "total_tokens": 26696,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23206,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an NMOS, \\(M_2\\) is a PMOS, both in saturation, the two current sources are ideal, and the lower unlabeled source is a bias sink \\(I_B\\).  \nLet the lower common node be \\(V_X\\).\n\n## 1) What the circuit does\n\nThis is a **current-input / voltage-output** stage.\n\n- The input current \\(I_{in}\\) is injected into node \\(V_X\\).\n- \\(M_1\\) and \\(I_1\\) set \\(V_X\\) to an almost constant value.\n- \\(M_2\\) adjusts its current so that KCL is satisfied at \\(V_X\\).\n- Therefore the input current is converted into an output voltage \\(V_{out}\\).\n\nSo the lower node is a **low-impedance current-input node**, and the labeled node \\(V_{out}\\) is the **voltage output**.\n\n---\n\n## 2) DC analysis\n\n### At node \\(V_{out}\\)\nThe gate of \\(M_2\\) draws essentially no DC current, so the current from \\(I_1\\) must go through \\(M_1\\):\n\n\\[\nI_{D1} = I_1\n\\]\n\nThus \\(M_1\\)'s current is fixed by \\(I_1\\).\n\nFor \\(M_1\\) in saturation,\n\n\\[\nI_1 = \\frac{\\beta_1}{2}(V_{GS1}-V_{TN})^2\n\\]\n\nwith\n\n\\[\nV_{GS1}=V_b-V_X\n\\]\n\nHence\n\n\\[\nV_X = V_b - V_{TN} - \\sqrt{\\frac{2I_1}{\\beta_1}}\n\\]\n\nignoring body effect and channel-length modulation.\n\nSo \\(V_X\\) is set mainly by \\(V_b\\) and \\(I_1\\), and is nearly constant.\n\n---\n\n### At node \\(V_X\\)\nKCL gives\n\n\\[\nI_B = I_{in} + I_1 + I_{D2}\n\\]\n\nso\n\n\\[\nI_{D2} = I_B - I_1 - I_{in}\n\\]\n\nNow for PMOS \\(M_2\\) in saturation,\n\n\\[\nI_{D2}=\\frac{\\beta_2}{2}(V_{SG2}-|V_{TP}|)^2\n\\]\n\nand\n\n\\[\nV_{SG2}=V_{DD}-V_{out}\n\\]\n\nTherefore,\n\n\\[\nI_B - I_1 - I_{in}\n=\n\\frac{\\beta_2}{2}(V_{DD}-V_{out}-|V_{TP}|)^2\n\\]\n\nso\n\n\\[\n\\boxed{\nV_{out}\n=\nV_{DD}-|V_{TP}|\n-\n\\sqrt{\\frac{2\\,(I_B-I_1-I_{in})}{\\beta_2}}\n}\n\\]\n\n### Interpretation\nAs \\(I_{in}\\) increases, \\(I_{D2}\\) must decrease, so \\(V_{SG2}\\) decreases, which means:\n\n\\[\n\\boxed{I_{in}\\uparrow \\;\\Rightarrow\\; V_{out}\\uparrow}\n\\]\n\nSo the circuit has a **positive current-to-voltage transfer**.\n\n---\n\n## 3) Small-signal behavior\n\nIf you linearize around the bias point:\n\n\\[\n\\Delta I_{D2} = -\\Delta I_{in}\n\\]\n\nFor the PMOS,\n\n\\[\n\\Delta I_{D2} = -g_{m2}\\,\\Delta V_{out}\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\n\\frac{dV_{out}}{dI_{in}} \\approx \\frac{1}{g_{m2}}\n}\n\\]\n\nSo the stage behaves like a **transimpedance** of about\n\n\\[\n\\boxed{R_T \\approx \\frac{1}{g_{m2}}}\n\\]\n\n---\n\n## 4) Why the input node is low impedance\n\nIncluding finite \\(r_{o1}\\) and \\(r_{o2}\\), the small-signal relations are\n\n\\[\nv_{out}=(1+g_{m1}r_{o1})\\,v_X\n\\]\n\nand\n\n\\[\n\\boxed{\nR_{in} \\equiv \\frac{v_X}{i_{in}}\n=\n\\frac{1}{g_{m2}(1+g_{m1}r_{o1})+g_{o2}}\n}\n\\]\n\nIf \\(g_{m1}r_{o1}\\gg 1\\) and \\(g_{o2}\\) is small,\n\n\\[\n\\boxed{\nR_{in} \\approx \\frac{1}{g_{m1}g_{m2}r_{o1}}\n}\n\\]\n\nwhich is very small.\n\nSo the circuit keeps the input node voltage nearly constant while accepting current — exactly what you want from a current-input front end.\n\n---\n\n## 5) Operating limits\n\nFor proper operation:\n\n1. **\\(M_2\\) must stay on**\n   \\[\n   I_B - I_1 - I_{in} \\ge 0\n   \\]\n\n2. **\\(M_1\\) must stay in saturation**\n   \\[\n   V_{out} \\ge V_b - V_{TN}\n   \\]\n\n3. The output should preferably drive a **high-impedance load**.\n\n---\n\n## Final summary\n\nThis circuit is a **current-to-voltage converter** using local MOS feedback.\n\n- \\(I_1\\) fixes the current in \\(M_1\\)\n- \\(M_1\\) therefore fixes the input-node voltage \\(V_X\\)\n- \\(M_2\\) absorbs the current difference\n- \\(V_{out}\\) adjusts so that \\(M_2\\)'s current satisfies KCL\n\n### Key results\n\\[\n\\boxed{V_X \\approx V_b - V_{TN} - \\sqrt{2I_1/\\beta_1}}\n\\]\n\n\\[\n\\boxed{V_{out}=V_{DD}-|V_{TP}|-\\sqrt{\\frac{2(I_B-I_1-I_{in})}{\\beta_2}}}\n\\]\n\n\\[\n\\boxed{\\frac{dV_{out}}{dI_{in}} \\approx \\frac{1}{g_{m2}}}\n\\]\n\n\\[\n\\boxed{R_{in}\\approx \\frac{1}{g_{m1}g_{m2}r_{o1}} \\text{ (very low)}}\n\\]\n\nIf you want, I can also draw the **small-signal equivalent** and derive these equations step by step.",
        "format": "markdown",
        "sha256": "d918102f52fdbbdc462d1b6530799e4ebf505d6080f3ed1434251588c5a209ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly models M1 as the common-gate NMOS input device and M2 as the PMOS feedback device driven by Vout, and obtains the low input resistance and transimpedance of approximately 1/gm2. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 32270,
        "total_tokens": 34437,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30861,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 32270,
        "total_tokens": 34437,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30861,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume:\n\n- \\(M_1\\) is an **NMOS**,\n- \\(M_2\\) is a **PMOS**,\n- both are in saturation,\n- the upper and lower current sources are ideal,\n- the lower unlabeled current sink is a bias current; call it \\(I_B\\).\n\nLet the lower common node be \\(V_X\\).\n\n## 1) What this circuit is\n\nThis is essentially a **regulated-cascode / flipped-voltage-follower core**.\n\n- \\(M_1\\) is a common-gate NMOS biased by \\(V_b\\).\n- \\(M_2\\) senses \\(V_{out}\\) and feeds current back into node \\(V_X\\).\n- The feedback makes node \\(V_X\\) a **low-impedance node**.\n- The current \\(I_{in}\\) is converted into a voltage at \\(V_{out}\\).\n\n---\n\n## 2) DC analysis\n\n### Current in \\(M_1\\)\n\nAt node \\(V_{out}\\), the only DC current path is through \\(I_1\\) and \\(M_1\\), so\n\n\\[\nI_{M1}=I_1\n\\]\n\nFor \\(M_1\\) in saturation,\n\n\\[\nI_1=\\frac{\\beta_n}{2}(V_{GS1}-V_{TN})^2\n\\]\n\nwith\n\n\\[\nV_{GS1}=V_b-V_X\n\\]\n\nSo\n\n\\[\nV_X = V_b - V_{TN} - \\sqrt{\\frac{2I_1}{\\beta_n}}\n\\]\n\nThus the lower node voltage is approximately fixed by \\(V_b\\) and \\(I_1\\).\n\n---\n\n### Current in \\(M_2\\)\n\nApply KCL at node \\(V_X\\):\n\ncurrents entering node \\(V_X\\):\n\n- from \\(M_1\\): \\(I_1\\)\n- from input source: \\(I_{in}\\)\n- from \\(M_2\\): \\(I_{M2}\\)\n\ncurrent leaving node \\(V_X\\):\n\n- bias sink \\(I_B\\)\n\nHence\n\n\\[\nI_B = I_1 + I_{in} + I_{M2}\n\\]\n\nso\n\n\\[\nI_{M2}=I_B-I_1-I_{in}\n\\]\n\nFor \\(M_2\\) in saturation,\n\n\\[\nI_{M2}=\\frac{\\beta_p}{2}(V_{SG2}-|V_{TP}|)^2\n\\]\n\nand\n\n\\[\nV_{SG2}=V_{DD}-V_{out}\n\\]\n\nTherefore,\n\n\\[\nI_B-I_1-I_{in}\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{out}-|V_{TP}|)^2\n\\]\n\nSo the DC transfer is\n\n\\[\n\\boxed{\nV_{out}\n=\nV_{DD}-|V_{TP}|\n-\\sqrt{\\frac{2(I_B-I_1-I_{in})}{\\beta_p}}\n}\n\\]\n\nSo:\n\n- if \\(I_{in}\\) increases, \\(M_2\\) must supply less current,\n- therefore \\(V_{SG2}\\) decreases,\n- hence \\(V_{out}\\) **increases**.\n\n---\n\n## 3) Small-signal behavior\n\nLinearizing around the bias point:\n\nSince \\(I_B\\) and \\(I_1\\) are fixed,\n\n\\[\n\\Delta i_{M2}=-\\Delta i_{in}\n\\]\n\nFor the PMOS,\n\n\\[\n\\Delta i_{M2}=-g_{m2}\\,\\Delta v_{out}\n\\]\n\nthus\n\n\\[\n-g_{m2}\\,\\Delta v_{out}=-\\Delta i_{in}\n\\]\n\nso\n\n\\[\n\\boxed{\n\\frac{\\Delta v_{out}}{\\Delta i_{in}} \\approx \\frac{1}{g_{m2}}\n}\n\\]\n\nSo the circuit behaves as a **current-to-voltage converter** with transresistance about\n\n\\[\n\\boxed{R_m \\approx \\frac{1}{g_{m2}}}\n\\]\n\n(sign is positive for the current direction shown).\n\n---\n\n## 4) Input-node resistance\n\nThe lower node \\(V_X\\) is regulated by feedback and therefore has very low small-signal resistance.\n\nA more detailed small-signal result is\n\n\\[\n\\boxed{\nr_{in} \\approx \\frac{1}{g_{o2}+g_{m2}(1+g_{m1}r_{o1})}\n}\n\\]\n\nand if \\(g_{m1}r_{o1}\\gg 1\\),\n\n\\[\n\\boxed{\nr_{in}\\approx \\frac{1}{g_{m2}(1+g_{m1}r_{o1})}\n\\approx \\frac{1}{g_{m1}g_{m2}r_{o1}}\n}\n\\]\n\nSo the input node is a **low-impedance current-summing node**.\n\n---\n\n## 5) Operating limits\n\nFor proper operation:\n\n1. **\\(M_2\\) must remain on**\n   \\[\n   I_B-I_1-I_{in} > 0\n   \\]\n\n2. **\\(M_1\\) must remain in saturation**\n   \\[\n   V_{out}-V_X \\ge V_{OV1}\n   \\]\n\nIf these conditions fail, the simple relations above no longer hold.\n\n---\n\n## 6) Interpretation\n\nThis circuit does two main things:\n\n- keeps the input node \\(V_X\\) nearly constant:\n  \\[\n  V_X \\approx V_b - V_{GS1}\n  \\]\n- converts the injected current \\(I_{in}\\) into a voltage at \\(V_{out}\\):\n  \\[\n  v_{out} \\approx \\frac{i_{in}}{g_{m2}}\n  \\]\n\nSo it is a **low-input-resistance current-input stage** with a voltage output.\n\nIf you want, I can also draw the **small-signal equivalent circuit** and derive the above equations step by step.",
        "format": "markdown",
        "sha256": "6c506cc49178d521b0893562cb4530454c9b313af92ff1f4069204e585402258"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, describes feedback to the input node, and gives the expected low input resistance and transimpedance near 1/gm2.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 23029,
        "total_tokens": 25196,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 23029,
        "total_tokens": 25196,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—if the capacitors are just **very large but finite**, the 3-inverter ring still oscillates; it just oscillates **more slowly**.\n\nFor a ring oscillator,\n\n- each stage delay increases with load capacitance: \\(t_{pd} \\propto C_L\\)\n- and the oscillation period is roughly  \n  \\[\n  T \\approx 2N t_{pd}\n  \\]\n  so for 3 stages,\n  \\[\n  T \\approx 6 t_{pd}, \\qquad f \\propto \\frac{1}{C_L}\n  \\]\n\nSo making all three capacitors larger lowers the frequency, but does not by itself destroy oscillation.\n\nMore formally, if each inverter is modeled as an inverting gain with a single RC pole,\n\\[\nH(s)=\\frac{-A}{1+sRC}\n\\]\nthen for 3 stages the oscillation condition occurs at\n\\[\n\\omega_{osc}=\\frac{\\sqrt{3}}{RC}\n\\]\nSo increasing \\(C\\) just moves the oscillation to a lower frequency.\n\n## Important exception\nIf you mean **literally** \\(C_L \\to \\infty\\), then yes: the frequency tends to zero and the startup time tends to infinity. In that strict limit, it does not oscillate in any finite time.\n\n## Practical note\nIn real hardware, if the capacitors are made extremely large, the oscillator may **appear** not to oscillate because:\n\n- startup becomes very slow,\n- leakage and nonideal currents matter,\n- you may not wait long enough to see a cycle.\n\nSo the short answer is:\n\n- **Finite but arbitrarily large \\(C_L\\):** still oscillates, just slower.\n- **Infinite \\(C_L\\):** no finite-frequency oscillation.",
        "format": "markdown",
        "sha256": "ad17f18cad744a498a9ef656a3c2abce6bffe6178e7a5d97e2a12138d5b76e98"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large but finite equal capacitors leave the ring oscillating at a lower frequency, supported by both delay scaling and a valid single-pole phase argument. The strict infinite-capacitance caveat does not undermine that conclusion.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2023,
        "output_tokens": 7630,
        "total_tokens": 9653,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2023,
        "output_tokens": 7630,
        "total_tokens": 9653,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No— not for any **finite** capacitor values.\n\nIf all three load capacitors \\(C_L\\) are increased together, a 3-stage ring oscillator like this will generally still oscillate; it just oscillates **more slowly**.\n\n### Why\nEach inverter plus its load capacitor forms a delayed stage. Larger \\(C_L\\) means larger delay:\n\\[\nt_p \\propto C_L\n\\]\nand the ring-oscillator frequency is roughly\n\\[\nf \\approx \\frac{1}{2N t_p}\n\\]\nwith \\(N=3\\). So:\n\\[\nf \\propto \\frac{1}{C_L}\n\\]\n\nSo as \\(C_L\\) gets larger, the frequency drops toward zero.\n\n### Important distinction\n- **Arbitrarily large but finite \\(C_L\\):** still oscillates, just very slowly.\n- **Exactly infinite \\(C_L\\):** then the node voltages cannot change, so the circuit is effectively frozen and does not oscillate.\n\n### Practical note\nIn a real circuit, if \\(C_L\\) is made huge, the oscillator may appear to “fail” because:\n- startup becomes extremely slow,\n- leakage currents and noise become important,\n- the waveform may be badly distorted.\n\nBut that’s a practical limitation, not a fundamental one.\n\nSo the short answer is:\n\n**No for any finite capacitance; yes only in the limiting case \\(C_L \\to \\infty\\), where the oscillation frequency goes to 0.**",
        "format": "markdown",
        "sha256": "ece50a8e94631f0aa2bbbdc83e81a9df86bf2fcc8c1fb5a6f5f1e0d9ef2e558f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that increasing all three capacitors slows the ring without stopping oscillation for finite values, supported by the delay and inverse-frequency argument. The infinite-capacitance caveat does not undermine the answer.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2023,
        "output_tokens": 5497,
        "total_tokens": 7520,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2023,
        "output_tokens": 5497,
        "total_tokens": 7520,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—for any **finite** capacitor values, an ideal 3-stage ring oscillator like this still oscillates; it just oscillates **more slowly**.\n\nWhy:\n- Each capacitor increases the stage delay.\n- Ring-oscillator frequency is roughly inversely proportional to that delay, so\n  \\[\n  f \\propto \\frac{1}{C_L}.\n  \\]\n- As \\(C_L\\) gets larger, the oscillation frequency drops accordingly.\n\nA more formal small-signal model gives each stage as\n\\[\nH(s)=\\frac{-A_0}{1+s\\tau}, \\qquad \\tau \\approx R_{\\text{out}}C_L\n\\]\nand the 3-stage loop oscillates when \\(A_0>2\\), with\n\\[\n\\omega_0 \\tau = \\sqrt{3}.\n\\]\nSo increasing \\(C_L\\) increases \\(\\tau\\), which lowers \\(\\omega_0\\), but does **not** by itself eliminate oscillation.\n\n### Important nuance\n- If \\(C_L \\to \\infty\\) **exactly**, then the frequency tends to **0** and startup time tends to **infinity**.\n- So in that strict limit, it no longer oscillates in any finite time.\n\nSo the best short answer is:\n\n- **Arbitrarily large but finite capacitors:** **No**, it still oscillates, just very slowly.  \n- **Infinite capacitance:** **Yes**, effectively the oscillation disappears.  \n\nIn a real circuit, leakage, noise, and finite observation time may make a very heavily loaded oscillator *appear* not to start.",
        "format": "markdown",
        "sha256": "e9035da2447c76fcee98a14ca433ebae6028e4fb30cad21baed4f8258adfd074"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that any finite equal loading capacitances leave the ring oscillating at a lower frequency, supported by both delay and small-signal arguments. The exact-infinite-capacitance caveat does not undermine the answer for arbitrarily large finite values.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2023,
        "output_tokens": 8630,
        "total_tokens": 10653,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2023,
        "output_tokens": 8630,
        "total_tokens": 10653,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the inverters and their noise stay the same, doubling all three \\(C_L\\)’s:\n\n- doubles each stage delay,\n- so the ring oscillation frequency is cut in half.\n\nFor a ring oscillator, phase noise at a fixed offset \\(\\Delta f\\) scales roughly as\n\n\\[\nL(\\Delta f)\\propto \\left(\\frac{f_0}{\\Delta f}\\right)^2 \\propto \\frac{1}{C_L^2}.\n\\]\n\nSo if \\(C_L\\) is doubled:\n\n\\[\nL' = L \\cdot \\left(\\frac{1}{2}\\right)^2 = \\frac{L}{4}\n\\]\n\nwhich is an improvement of about **6 dB**.\n\nSo the short answer is:\n\n**The phase noise gets 6 dB better (lower/more negative in dBc/Hz), while the oscillation frequency becomes half.**\n\nCaveat: that is for **phase noise at the same absolute offset frequency**. If you compare at the same **normalized offset** \\((\\Delta f/f_0)\\), it is roughly unchanged.",
        "format": "markdown",
        "sha256": "718bcd5863341c2cb0c71a0e58e23834405edbf8393164bc5962201289bcf6c4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling the capacitors halves the oscillation frequency, reducing phase noise by about a factor of four (6 dB) at a fixed offset, while leaving it roughly unchanged at a fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 9043,
        "total_tokens": 11063,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 9043,
        "total_tokens": 11063,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the inverter strength/bias stays the same:\n\n- Each stage delay is proportional to \\(C_L\\), so doubling all three capacitors **doubles the delay**.\n- Therefore the ring oscillator frequency **halves**.\n\nFor phase noise, the usual ring-oscillator result is:\n\n\\[\nL(\\Delta f)\\propto \\frac{f_0^2}{P\\,\\Delta f^2}\n\\]\n\nand the dynamic power is roughly\n\n\\[\nP \\approx N C_L V_{DD}^2 f_0\n\\]\n\nSo if \\(C_L\\) doubles and \\(f_0\\) halves, the power stays about the same, while \\(f_0^2\\) drops by 4. Hence:\n\n\\[\nL_{\\text{new}} \\approx \\frac{1}{4} L_{\\text{old}}\n\\]\n\nSo the phase noise at a **fixed offset frequency** improves by about **6 dB**.\n\n### Short answer\n- **Oscillation frequency:** halves  \n- **Phase noise at the same offset in Hz:** **improves by 6 dB** (becomes 4× lower)\n\n### Nuance\nIf instead you compare phase noise at the same **fractional offset** \\((\\Delta f/f_0)\\), it is approximately **unchanged**.",
        "format": "markdown",
        "sha256": "2c5155911a06c8c229e48298142dc08809ee05a7045291f357a02f48044f1e92"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling the capacitors halves the oscillation frequency and yields about a fourfold (6 dB) phase-noise reduction at a fixed offset; the fixed-relative-offset nuance is also correct.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 4943,
        "total_tokens": 6963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 4943,
        "total_tokens": 6963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If all three \\(C_L\\) values are doubled, then:\n\n1. **Each stage delay doubles**  \n   Since \\(t_d \\propto C_L\\), the ring oscillation frequency becomes about **half**:\n   \\[\n   f_0 \\to \\frac{f_0}{2}\n   \\]\n\n2. **Phase noise improves**  \n   The node charge swing is \\(q = C_L V\\). Doubling \\(C_L\\) doubles stored charge, so the same noise current causes a smaller phase perturbation. Since phase-noise power scales roughly as \\(1/q^2\\),\n   \\[\n   L(\\Delta f) \\propto \\frac{1}{C_L^2}\n   \\]\n   so doubling \\(C_L\\) gives about **4× lower phase-noise power**, i.e. about **6 dB better phase noise** at the **same absolute offset** from the carrier.\n\n### Short answer\n**Doubling the three capacitors halves the oscillation frequency and improves the phase noise by about 6 dB** (assuming the inverter noise and swing stay the same).\n\nIf you want, I can also explain the difference between this result and what happens to **timing jitter**.",
        "format": "markdown",
        "sha256": "eaca3081eac0080cfa91d21889f6c73602fb2749ac1dd5ce592073711f890009"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and lowers phase noise by about 4× (6 dB) at the same absolute offset, with a supporting charge-based argument.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 9066,
        "total_tokens": 11086,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 9066,
        "total_tokens": 11086,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For a **real ring oscillator**, **yes** — if \\(C_L\\) is made large enough, the circuit can stop oscillating.\n\nWhy:\n\n- A 3-inverter ring has a DC operating point near the inverter trip point.\n- Oscillation starts only if that operating point is **unstable**.\n- Making one node very heavily loaded makes that stage **much slower** than the other two.\n- Then, at the frequency where the loop has the needed phase shift, the heavily loaded stage has very little gain left.\n- So the **loop gain drops below 1**, and the loop settles to a DC value instead of sustaining oscillation.\n\nIntuitively: with huge \\(C_L\\), that node moves so slowly that the other two inverters almost track it instantly. Since two inversions cancel, the first inverter nearly “sees itself,” and the loop tends to a bias point rather than toggling.\n\n### Small-signal view\nIf each inverter is modeled as\n\\[\nH_i(s)=\\frac{-A}{1+s\\tau_i}\n\\]\nand the loaded stage has \\(\\tau_1 \\propto C_L\\), then as \\(C_L\\to\\infty\\), the magnitude of that stage at the candidate oscillation frequency goes to zero, so the Barkhausen gain condition fails.\n\n---\n\n### Important caveat\nIf you use an **ideal digital-delay model** with:\n- infinite gain,\n- sharp thresholds,\n- and just a larger propagation delay for the loaded stage,\n\nthen **any finite \\(C_L\\)** still gives oscillation; it just becomes slower and slower.\n\nSo the complete answer is:\n\n- **Ideal logic model:** no, it just oscillates more slowly.\n- **Real analog inverter model:** yes, sufficiently large \\(C_L\\) can kill the oscillation.",
        "format": "markdown",
        "sha256": "6a08cbac7c409cc51db255e7a2f9a90d1e710e3de22d9a272e622bcdf360d5e0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that a sufficiently large one-node load can stop oscillation and explains the dominant loading, loop-gain loss, and settling to a DC operating point. The ideal digital-delay caveat is model-specific and does not undermine the answer for the real analog circuit.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 9702,
        "total_tokens": 11722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 9702,
        "total_tokens": 11722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — in a real 3-inverter ring oscillator, a sufficiently large \\(C_L\\) can stop the oscillation.\n\nWhy:\n- Oscillation needs enough **loop phase shift** and **loop gain**.\n- As \\(C_L\\) gets very large, that node becomes **very slow**.\n- The other two inverters then tend to follow it almost **quasi-statically**.\n- In that limit, the loop effectively collapses to an almost **first-order** system, which settles to a DC point near the inverter threshold instead of sustaining a limit cycle.\n\nSo in the limit \\(C_L \\to \\infty\\), the circuit does **not** oscillate.\n\nA useful nuance:\n\n- In the **ideal digital-delay model** of a ring oscillator, any finite extra load just increases one stage delay, so the oscillation frequency drops and only reaches 0 when \\(C_L\\) is literally infinite.\n- In a **real CMOS/transistor** implementation, there is usually a **finite maximum \\(C_L\\)** beyond which startup fails, because the loop gain at the required phase shift falls below 1.\n\nSo the practical answer is: **yes, if \\(C_L\\) is made large enough, the oscillator can fail to oscillate.**",
        "format": "markdown",
        "sha256": "92ce6646319296b3812b80ae5a1d9822f2dba870936e074301d7dfe83933d6c0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large asymmetric loading can stop oscillation, explaining that the loaded node becomes slow and the loop can settle near DC. This matches the accepted time-domain explanation; the ideal-delay-model nuance does not contradict the conclusion for the real circuit.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 13215,
        "total_tokens": 15235,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 13215,
        "total_tokens": 15235,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — in a real ring oscillator, a sufficiently large \\(C_L\\) can stop the oscillation.\n\nWhy:\n- A 3-inverter ring oscillates only if the loop has enough **delay/phase shift** and **gain**.\n- Making \\(C_L\\) large makes that node very slow.\n- If it becomes much slower than the other two stages, those two inverters effectively track it almost quasi-statically.\n- Then the loop behaves more like a **slow first-order feedback system** with a stable DC operating point near the inverter thresholds, rather than a 3-stage delayed loop.\n\nSo the behavior is:\n\n- **Moderate \\(C_L\\):** still oscillates, just slower.\n- **Very large \\(C_L\\):** oscillation amplitude shrinks and the loop can settle to a DC bias point.\n- **\\(C_L \\to \\infty\\):** the loaded node cannot move, so oscillation is impossible.\n\nA small-signal view says the same thing. If each inverter is modeled as\n\\[\n\\frac{-A}{1+s\\tau_i},\n\\]\nthen increasing \\(C_L\\) increases one \\(\\tau_i\\). Beyond some point, at the frequency where the phase condition is met, the loop gain is already below 1, so oscillation cannot sustain.\n\nCaveat: in the very simplified **ideal digital delay model**, people often say “it still oscillates, just more slowly.” But for **real CMOS inverters**, arbitrarily large \\(C_L\\) will eventually kill the oscillation.",
        "format": "markdown",
        "sha256": "bb7893d44030a9c183bed75b2787458bfb33af03e619fa94164b4e4af56895c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that a very large load on one node creates a dominant slow pole, causing excessive loop gain/phase roll-off and preventing sustained oscillation. The quasi-static settling explanation is also consistent with the golden solution.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 12240,
        "total_tokens": 14260,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2020,
        "output_tokens": 12240,
        "total_tokens": 14260,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming this is a CMOS ring oscillator and you scale **all NMOS/PMOS widths by 2** while keeping \\(L\\), \\(V_{DD}\\), and topology the same:\n\n- **Drive current** of each inverter roughly **doubles**\n- **Parasitic/gate capacitances** also roughly **double**\n\nSo the stage delay\n\\[\nt_d \\sim \\frac{CV}{I}\n\\]\nstays about the **same**, which means the **oscillation frequency is nearly unchanged**.\n\nFor phase noise:\n\n- MOS thermal noise current scales roughly with \\(g_m\\), so it also **increases** with width\n- But the node stores more charge since \\(Q = CV\\) and \\(C\\) doubled\n\nNet result, first order:\n- **phase noise improves** (gets lower / more negative in dBc/Hz)\n- roughly by **2× in power**, i.e. about **3 dB better**\n\nSo the short answer is:\n\n> **Doubling both NMOS and PMOS widths usually improves the phase noise by about 3 dB, while power dissipation roughly doubles and oscillation frequency stays about the same.**\n\nA useful extra note: the **FoM** usually stays about **unchanged**, because you paid for that 3 dB with about **2× power**.",
        "format": "markdown",
        "sha256": "2f8e0aab8014e03b2b1d2c61fc21b95d4dfc6c3666113ca5699c0d73a32a77e1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives about a 3 dB phase-noise reduction and explains the width scaling, including increased noise, doubled capacitance and current, and roughly unchanged frequency.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2979,
        "output_tokens": 6016,
        "total_tokens": 8995,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5733,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2979,
        "output_tokens": 6016,
        "total_tokens": 8995,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5733,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming this is a CMOS ring oscillator and you scale **all NMOS and PMOS widths by 2×**:\n\n- **Phase noise generally improves (decreases)**.\n- **First-order improvement is about 3 dB**.\n\nWhy:\n- \\(g_m\\) and switching current roughly **double**.\n- Node/gate capacitances also roughly **double**.\n- So the **delay/frequency stays about the same** (\\(I/C\\) is similar).\n- But the oscillator stores about **2× more charge/energy per transition**, making it less sensitive to device noise.\n\nA common first-order scaling is:\n\n\\[\nL(\\Delta f) \\propto \\frac{\\text{device noise}}{\\text{signal energy}} \\propto \\frac{W}{W^2}=\\frac{1}{W}\n\\]\n\nSo if \\(W\\) doubles:\n\n\\[\nL(\\Delta f) \\rightarrow \\frac{1}{2} L(\\Delta f)\n\\]\n\nwhich is **~3 dB lower phase noise**.\n\nSo, in short: **doubling both NMOS and PMOS widths usually lowers the phase noise by about 3 dB, while roughly doubling power consumption**.",
        "format": "markdown",
        "sha256": "3555d20c36acfb732a2173fffa7e9d65b9087f4eec7495895bdcb279407b45be"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives an approximately 3 dB phase-noise reduction and supports it with width-scaling reasoning; it also notes the roughly doubled power cost.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2979,
        "output_tokens": 4032,
        "total_tokens": 7011,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3775,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2979,
        "output_tokens": 4032,
        "total_tokens": 7011,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3775,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this CMOS ring oscillator, **doubling both NMOS and PMOS widths usually improves the phase noise by about 3 dB**.\n\nWhy, first-order:\n\n- \\(g_m\\) and switching current roughly **double**\n- gate/drain capacitances also roughly **double**\n- so stage delay \\(t_d \\sim \\dfrac{CV}{I}\\) stays about **the same**  \n  → oscillation frequency stays about the same\n\nBut the oscillator now stores more charge/energy per transition, so the same normalized noise causes less timing error. A common first-order result is:\n\n- **phase-noise power halves** → about **3 dB lower phase noise**\n- equivalently, **RMS jitter improves by about \\(1/\\sqrt{2}\\)**\n\nSo the short answer is:\n\n**Phase noise gets better (lower), approximately by 3 dB, assuming same \\(V_{DD}\\), same channel lengths, and no dominant fixed parasitics.**",
        "format": "markdown",
        "sha256": "72d3939af1c9bdd595201cf46b213f562dac5c30d99500e7db52fd714af07e5c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts an approximately 3 dB phase-noise reduction and gives a consistent first-order scaling argument: current and capacitance both double, leaving frequency roughly unchanged while increasing signal charge.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2979,
        "output_tokens": 4679,
        "total_tokens": 7658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4471,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2979,
        "output_tokens": 4679,
        "total_tokens": 7658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4471,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Interpreting this in the usual **small-signal sense about the ring’s dc metastable point**:\n\n- In a 3-stage identical CMOS ring, the dc equilibrium is with all three internal nodes at the inverter trip point.\n- Apply a small test voltage \\(v_x\\) at the supply node.\n- For one inverter, let the small shift of its input/output node be \\(v\\).\n\nFor that inverter,\n\n\\[\n\\Delta i_n = g_{mn}v\n\\]\n\nand\n\n\\[\n\\Delta i_p = g_{mp}(v_x-v)\n\\]\n\nsince the PMOS source moves by \\(v_x\\) while its gate moves by \\(v\\).\n\nAt equilibrium, the incremental NMOS and PMOS currents must match:\n\n\\[\ng_{mn}v = g_{mp}(v_x-v)\n\\]\n\nso\n\n\\[\nv=\\frac{g_{mp}}{g_{mn}+g_{mp}}\\,v_x\n\\]\n\nThus the small-signal supply current of **one** stage is\n\n\\[\n\\Delta i_{DD,1}=g_{mp}(v_x-v)\n=\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}\\,v_x\n\\]\n\nThere are 3 identical stages in parallel at the supply node, so\n\n\\[\n\\Delta i_x\n=3\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}\\,v_x\n\\]\n\nHence\n\n\\[\nR_X=\\frac{v_x}{\\Delta i_x}\n=\\frac{g_{mn}+g_{mp}}{3g_{mn}g_{mp}}\n\\]\n\nFor a symmetric inverter, \\(g_{mn}=g_{mp}=g_m\\), giving\n\n\\[\n\\boxed{R_X \\approx \\frac{2}{3g_m}}\n\\]\n\nSo the supply node presents a **positive** small-signal resistance, approximately \\(2/(3g_m)\\) for matched devices.",
        "format": "markdown",
        "sha256": "65e950e188be2509b0c1fce8167015f0ecfcf393cabc0fd3a9ae7fe80286ae91"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer consistently derives a static gm-based resistance at the metastable point, but misses the dominant oscillation-driven charging and discharging of the node capacitances. The supply resistance is set by that dynamic load, not by the static inverter conductances.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2975,
        "output_tokens": 15933,
        "total_tokens": 18908,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15512,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2975,
        "output_tokens": 15933,
        "total_tokens": 18908,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15512,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the ring oscillator’s supply current is dominated by charging the stage capacitances:\n\n- For an \\(N\\)-stage ring,\n  \\[\n  P \\approx N\\,C_{\\text{eff}}\\,V_{DD}^{2}\\,f_{osc}\n  \\]\n  so the average supply current is\n  \\[\n  I_{DD}=\\frac{P}{V_{DD}} \\approx N\\,C_{\\text{eff}}\\,V_{DD}\\,f_{osc}.\n  \\]\n\n- Hence the small-signal conductance seen at the supply node is\n  \\[\n  g_x=\\frac{d I_{DD}}{d V_{DD}}\n     =N\\,C_{\\text{eff}}\\!\\left(f_{osc}+V_{DD}\\frac{d f_{osc}}{dV_{DD}}\\right).\n  \\]\n\nSo the small-signal resistance is\n\n\\[\n\\boxed{\nR_x=\\left(\\frac{d I_{DD}}{d V_{DD}}\\right)^{-1}\n=\\frac{1}{N\\,C_{\\text{eff}}\\!\\left(f_{osc}+V_{DD}\\frac{d f_{osc}}{dV_{DD}}\\right)}\n}\n\\]\n\nFor the **3-stage** ring oscillator in the figure:\n\n\\[\n\\boxed{\nR_x=\\frac{1}{3\\,C_{\\text{eff}}\\!\\left(f_{osc}+V_{DD}\\frac{d f_{osc}}{dV_{DD}}\\right)}\n}\n\\]\n\nIf you ignore the dependence of oscillation frequency on supply voltage, this reduces to\n\n\\[\n\\boxed{\nR_x \\approx \\frac{1}{3\\,C_{\\text{eff}}\\,f_{osc}}\n}\n\\]\n\nwhere \\(C_{\\text{eff}}\\) is the effective switched capacitance per stage.",
        "format": "markdown",
        "sha256": "b0fb384d1ad3c4358ea2c6a2823102293110b63653c2e1654ba6c7ff4ad1ba6d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies oscillation-driven capacitive charging as the supply-current mechanism and derives the three-stage result, including the frequency-dependence refinement and the fixed-frequency form.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2975,
        "output_tokens": 13292,
        "total_tokens": 16267,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12906,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2975,
        "output_tokens": 13292,
        "total_tokens": 16267,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12906,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the 3-stage CMOS ring oscillator as a **switched-capacitor load** at its supply.\n\nIf each inverter switches an effective load \\(C_L\\), then on each \\(0 \\to 1\\) output transition it draws charge\n\n\\[\nQ = C_L V_{DD}\n\\]\n\nfrom the supply. Each stage has one such charging event per oscillation period, so for 3 stages the average supply current is\n\n\\[\nI_{DD} = 3\\,Q f_{osc} = 3 C_L V_{DD} f_{osc}.\n\\]\n\nHence the small-signal conductance seen at the supply is\n\n\\[\ng_x = \\frac{dI_{DD}}{dV_{DD}} \\approx 3 C_L f_{osc},\n\\]\n\nso the small-signal resistance is\n\n\\[\n\\boxed{R_x \\approx \\frac{1}{3 C_L f_{osc}}}\n\\]\n\nor equivalently,\n\n\\[\n\\boxed{R_x \\approx \\frac{V_{DD}}{I_{DD}}}.\n\\]\n\nThis assumes ideal CMOS behavior, negligible short-circuit/leakage current, and that \\(f_{osc}\\) does not change appreciably with the small supply perturbation.  \nMore generally,\n\n\\[\nR_x = \\left[3C_L\\left(f_{osc}+V_{DD}\\frac{df_{osc}}{dV_{DD}}\\right)\\right]^{-1}.\n\\]",
        "format": "markdown",
        "sha256": "c74d98498f04bdf8bf1bdf6d826285cb6f8f58186e72b280448bcd60e861d652"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies oscillation-driven charging of the three load capacitances and derives the expected 1/(3 C_L f_osc) resistance for fixed frequency. It also gives the appropriate refinement when frequency varies with supply voltage.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2975,
        "output_tokens": 10669,
        "total_tokens": 13644,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2975,
        "output_tokens": 10669,
        "total_tokens": 13644,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — if the ring is **actually oscillating**, that \\(R_X\\) is generally **not** the right answer.\n\n### Why the quoted result appears\n\\[\nR_X \\approx \\frac13\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right)\n\\]\nis the small-signal resistance at the **DC metastable point** where all 3 node voltages are equal, so for each inverter \\(v_{in}=v_{out}\\). In that special bias condition, each CMOS inverter does look like:\n\n- a diode-connected PMOS to \\(V_{DD}\\),\n- in series with a diode-connected NMOS to ground.\n\nThree identical stages in parallel gives the factor \\(1/3\\).\n\nSo that result is a **linearization about the unstable equilibrium**, i.e. a startup-point result.\n\n---\n\n### What changes in oscillation\nOnce the ring is in steady oscillation:\n\n- there is **no time-invariant operating point**,\n- each inverter is **not** diode-connected most of the time,\n- the supply current is a **periodic pulse waveform** made of:\n  - charging current for load capacitances,\n  - short-circuit current during switching,\n  - leakage.\n\nSo the supply node no longer sees a simple resistor. It sees a **time-varying, frequency-dependent impedance**.\n\n---\n\n### Practical meaning\nIf you want a **slow/average** input resistance of the running oscillator, use\n\\[\nR_{\\text{eff}}=\\left(\\frac{d\\bar I_{DD}}{dV_{DD}}\\right)^{-1}\n\\]\nwith roughly\n\\[\n\\bar I_{DD}\\approx 3 C_L V_{DD} f_{osc}+ I_{sc,\\text{avg}}\n\\]\nfor a 3-stage ring.\n\nThat is usually **very different** from\n\\[\n\\frac13\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right).\n\\]\n\n---\n\n### Bottom line\n- **At the unstable DC bias point:** the quoted formula is a reasonable first-order result.\n- **For the free-running oscillator:** a single constant \\(R_X\\) is not really well-defined, and the diode-connected-device answer does **not** apply.",
        "format": "markdown",
        "sha256": "cc962a751385b21a66a430c27c54fc1d2645dc48a5f775a2269ffa053e0e6b79"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies capacitive charging as a source of oscillating supply current and gives an average-current model, but it does not establish that the resulting resistance remains on the order of the MOS on-resistance. Its claim that the resistance is usually very different from the static estimate conflicts with the golden conclusion.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 6110,
        "output_tokens": 21670,
        "total_tokens": 27780,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20716,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3055,
        "output_tokens": 10835,
        "total_tokens": 13890,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Only at the **metastable DC bias point**.\n\n- If all 3 node voltages are equal near the inverter trip point, then for each inverter \\(v_{in}=v_{out}\\), so each NMOS/PMOS pair is **small-signal diode-connected**.\n- In that sense,\n  \\[\n  R_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n  \\]\n  is the incremental resistance of the **unstable equilibrium**.\n\nSo if you mean “the small-signal resistance about the DC operating point from which oscillation starts,” then **no, oscillation does not change that local linearization**.\n\nBut if you mean “the resistance seen at the supply while the ring is actually running,” then **yes, the answer changes**:\n\n1. **The circuit is no longer at a DC operating point**; it is on a periodic limit cycle.\n2. For each inverter, **input and output are no longer equal**, so it does **not** behave like two diode-connected devices in series.\n3. The supply port is no longer a simple resistor. It is a **time-varying, frequency-dependent impedance**.\n\nIn fact, for a full-swing CMOS ring oscillator, the supply current is mostly:\n\n- **dynamic charging current** of the node capacitors, plus\n- some **short-circuit current** during transitions,\n\nnot the static current implied by the diode-connected model.\n\nIf you want a DC-like “effective resistance” during oscillation, the right definition is\n\\[\nR_{\\text{eff}}=\\left(\\frac{d\\overline{I}_{DD}}{dV_{DD}}\\right)^{-1},\n\\]\nwhere \\(\\overline{I}_{DD}\\) is the **average** supply current over one cycle. Roughly,\n\\[\n\\overline{I}_{DD}\\approx 3C_LV_{DD}f_{osc}+I_{sc},\n\\]\nso this effective resistance is generally **much larger** than \\(\\frac13(1/g_{mn}+1/g_{mp})\\).\n\nSo the short answer is:\n\n- **At the unstable DC point:** the quoted \\(R_X\\) is fine.\n- **In sustained oscillation:** that \\(R_X\\) no longer applies; the supply sees a periodic, dynamic load rather than a fixed small-signal resistor.",
        "format": "markdown",
        "sha256": "bebfb9e524afc20b2ed13440159969e1c00f9a23e65ed0067e3bc7523c3e53dc"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies capacitive charging as the dynamic supply-current mechanism, but concludes the effective resistance is much larger. The golden solution shows it remains on the order of the MOS on-resistance because the oscillation frequency scales inversely with stage delay.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 6110,
        "output_tokens": 18474,
        "total_tokens": 24584,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17450,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3055,
        "output_tokens": 9237,
        "total_tokens": 12292,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8725,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — if the ring is actually oscillating, that \\(R_X\\) is **not** the right description anymore.\n\n### Why that formula works\n\\[\nR_X \\approx \\frac13\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right)\n\\]\nassumes each inverter has **input = output**, so each MOSFET is effectively diode-connected. That is true only at the ring’s **unstable DC equilibrium**: all three nodes sit near the inverter trip point.\n\n### What changes in oscillation\nOnce the ring is running:\n\n- each stage’s **input and output are phase-shifted**, not equal\n- a stage is **not** a pair of diode-connected devices\n- most of the time, each inverter has **one device off**\n- current is drawn mainly during **switching**, to charge/discharge capacitances and through short-circuit overlap current\n\nSo the supply port is no longer a simple constant resistor. It is a **time-varying, frequency-dependent admittance**.\n\n### Intuition\nFor a rail-to-rail CMOS ring:\n\n- when a stage is settled at 0 or 1, its DC supply conductance is very small\n- during a transition, that stage may momentarily look like roughly\n  \\[\n  \\frac1{g_{mn}}+\\frac1{g_{mp}}\n  \\]\n- but the three stages are **not three equal resistors in parallel all the time**\n\nSo the factor \\(1/3\\) especially is not generally valid in steady oscillation.\n\n### If you want one effective number\nFor the **running oscillator**, a more meaningful low-frequency equivalent is based on average supply current:\n\\[\nR_{\\text{eff}}=\\left(\\frac{d\\overline{I_{DD}}}{dV_{DD}}\\right)^{-1}\n\\]\nwith, roughly,\n\\[\n\\overline{I_{DD}} \\approx 3 C_L V_{DD} f_0 + I_{sc}\n\\]\nfor a 3-stage CMOS ring.\n\nThat is usually much more like a **switched-capacitor load** than a static diode-connected resistor network.\n\n### Bottom line\n- **At the metastable DC point:** the quoted formula is reasonable.\n- **In steady oscillation:** no single constant\n  \\[\n  \\frac13\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right)\n  \\]\n  describes the supply node.\n\nSo: **yes, the answer changes**. The original expression is the resistance of the **non-oscillating bias point**, not of the **running oscillator**.",
        "format": "markdown",
        "sha256": "d7be66a93298247228d84af8ef9722495d75923cac9ffd4f19861f339aa06081"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies capacitive switching as the dynamic supply-current mechanism and gives an average-current model, but it does not derive the effective resistance or establish the key result that its magnitude remains on the order of the MOS on-resistance rather than becoming much higher. Its bottom line that the answer changes is therefore incomplete and potentially misleading.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3584,
        "input_tokens": 6110,
        "output_tokens": 31212,
        "total_tokens": 37322,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30094,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3055,
        "output_tokens": 15606,
        "total_tokens": 18661,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15047,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As \\(W_{M7}\\) increases, the **initial voltage gain generally decreases**.\n\nWhy:\n- \\(M_7\\) is the **tail transistor**.\n- Making it wider increases the **tail current**.\n- That makes the internal nodes discharge faster, so the latch enters regeneration sooner.\n- With less time for differential buildup, the **pre-latch / initial gain** is reduced.\n\nSo the tradeoff is:\n\n- **Larger \\(M_7\\)** → **faster comparator**\n- **But lower initial voltage gain**\n\nRoughly, \\(A_{v,\\text{init}} \\propto g_m / I_{\\text{tail}}\\), so increasing tail current tends to lower that gain.",
        "format": "markdown",
        "sha256": "76b58cf70615e24b106de725f7fff4e884f1bb64a41a583dd45cd1e47bf1c23f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that initial gain decreases as M7 widens, and explains that the increased tail current reduces the relevant gain factor, approximately gm/Itail.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3006,
        "output_tokens": 9477,
        "total_tokens": 12483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3006,
        "output_tokens": 9477,
        "total_tokens": 12483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As \\(W_{M7}\\) increases, the **initial voltage gain decreases**.\n\nWhy:\n- A wider \\(M_7\\) gives a **larger tail current**.\n- That makes nodes \\(P\\) and \\(Q\\) discharge **faster**.\n- So the latch enters regeneration **sooner**, leaving **less time** for the input pair \\(M_1,M_2\\) to build up an initial differential voltage.\n\nSo the comparator becomes **faster**, but its **initial gain/sensitivity is reduced**.  \nFirst-order, with other device sizes fixed, \\(A_{\\text{init}}\\) is inversely related to the tail strength set by \\(M_7\\).",
        "format": "markdown",
        "sha256": "6178b00f8252e229a93b729897ff8d663369a94edb3b31fdc66ca8d9e034e38a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that initial gain decreases and explains that a wider M7 increases tail current, shortening the integration interval and reducing gain relative to tail strength.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3006,
        "output_tokens": 9452,
        "total_tokens": 12458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9300,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3006,
        "output_tokens": 9452,
        "total_tokens": 12458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9300,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the other device sizes and biases stay fixed, the **initial voltage gain generally decreases as \\(W_{M7}\\) increases**.\n\nWhy:\n- \\(M_7\\) is the **tail transistor**.\n- Making \\(M_7\\) wider increases the **tail current** during evaluation.\n- That makes the internal nodes discharge **faster**, so the latch enters regeneration **sooner**.\n- The input pair then has **less time to build up** a differential voltage at the internal nodes.\n\nSo the comparator becomes **faster**, but its **initial/preamplification gain is reduced**.\n\nA common approximation is:\n\\[\nA_{\\text{init}} \\propto \\frac{g_m}{I_{\\text{tail}}}\n\\]\nand since \\(I_{\\text{tail}}\\) increases with \\(W_7\\) faster than \\(g_m\\) does, the net effect is a **drop in initial gain**.",
        "format": "markdown",
        "sha256": "a1b3a71a35e10c9495c51693a90857cf63f2e08435b1fb6c689772c6ebaa16f3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that increasing M7 width raises tail current and decreases initial gain, with a physically consistent gm/Itail explanation. The added timing discussion is secondary and does not undermine the main result.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3006,
        "output_tokens": 8709,
        "total_tokens": 11715,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8507,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3006,
        "output_tokens": 8709,
        "total_tokens": 11715,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8507,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at **P** and **Q** generally **increases the initial voltage gain** of this latch/comparator.\n\nWhy: larger \\(C_P\\) and \\(C_Q\\) make nodes P and Q change more slowly, which increases the early imbalance/time skew between the two branches, so a **larger initial differential voltage** is developed at \\(X\\) and \\(Y\\) before full regeneration.\n\nTradeoff: this also makes the circuit **slower** (larger delay / lower speed).\n\nSo, in short:\n\n- **Initial gain:** increases  \n- **Speed:** decreases",
        "format": "markdown",
        "sha256": "9767e5490ba1543d213f4470f7484dea0e83e2501a2cd91b3a1e53c550644b87"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite to the essential result: larger capacitance slows the transient but leaves initial gain approximately unchanged. The answer recognizes the speed tradeoff but incorrectly claims the extra time increases gain.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3006,
        "output_tokens": 12445,
        "total_tokens": 15451,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12315,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3006,
        "output_tokens": 12445,
        "total_tokens": 15451,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12315,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at **P** and **Q** generally **increases the initial voltage gain**.\n\nReason: larger \\(C_P\\) and \\(C_Q\\) hold those nodes more firmly during the start of regeneration, so there is less source-node movement (less degeneration), allowing a larger differential swing to develop at **X** and **Y**.\n\nTradeoff: **higher gain, but slower operation / longer delay**.",
        "format": "markdown",
        "sha256": "fd0d54f67c2a46d62d93f539dc0f49068db453fc197e30e97faff68a190ec8f8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The central conclusion is reversed: increasing capacitance at P and Q leaves the initial gain essentially unchanged because the longer amplification interval cancels the reduced node-voltage slope. The answer correctly notes slower operation, but its gain explanation is incorrect.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3006,
        "output_tokens": 15065,
        "total_tokens": 18071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14970,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3006,
        "output_tokens": 15065,
        "total_tokens": 18071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14970,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If \\(C_P\\) and \\(C_Q\\) are increased while the capacitance at \\(X\\) and \\(Y\\) stays the same, the **initial voltage gain increases**.\n\nRoughly, the initial gain is proportional to the capacitance ratio:\n\n\\[\nA_{v,\\text{init}} \\propto \\frac{C_{P,Q}}{C_{X,Y}}\n\\]\n\nSo larger capacitance at nodes **P** and **Q** gives a larger initial gain.  \nTradeoff: it usually also makes the circuit **slower**.",
        "format": "markdown",
        "sha256": "6f39d00421ab87bab5d719036392d40a91a77d7e7a76d306eaa7ed001bcbb0c9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly says the initial gain increases with capacitance. The capacitance instead cancels from the initial-gain relation; increasing it mainly slows the transient. The slowdown is a relevant observation, but the central conclusion and proposed capacitance-ratio mechanism are wrong.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3006,
        "output_tokens": 12255,
        "total_tokens": 15261,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12131,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3006,
        "output_tokens": 12255,
        "total_tokens": 15261,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12131,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both effects happen.\n\n- **Wider M5/M6** ⇒ higher \\(g_m\\), stronger positive feedback, so **regeneration can be faster**.\n- But wider M5/M6 also add **more capacitance at nodes X and Y** (critical dynamic nodes), so the initial voltage difference develops more slowly.\n\nSo the **overall speed is not monotonic**:\n\n- If **M5/M6 are too small**, increasing their width can **improve speed**.\n- If they are already reasonably sized, making them larger often gives **diminishing returns** and can **degrade the total delay** because the added capacitance dominates.\n\nIf you want the short practical answer: **a small increase may help, but oversized M5/M6 usually slow the comparator overall.**",
        "format": "markdown",
        "sha256": "dfab8315313272d0ddab907974dc4cb8fc770f6751ba6e90226cabb624c2ae16"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially strengthens regeneration and can improve speed, while added capacitance eventually causes diminishing returns or slower operation.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3005,
        "output_tokens": 11561,
        "total_tokens": 14566,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3005,
        "output_tokens": 11561,
        "total_tokens": 14566,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M5 and M6 are the cross-coupled PMOS of the latch.\n\n- **If you look only at regeneration:** making them wider can **help**, because their \\(g_m\\) increases and the positive feedback gets stronger.\n- **For overall comparator delay:** making them wider too much usually **hurts** or gives very little benefit, because they add more capacitance to the critical nodes \\(X\\) and \\(Y\\) (drain diffusion + cross-coupled gate load).\n\nA key point here is that **right after precharge, M5/M6 are initially off**, so their extra width **does not help at first**, but their extra capacitance is already there and slows the initial voltage development.\n\nSo the practical answer is:\n\n**Small upsizing may slightly improve late-stage regeneration, but large increases in M5/M6 generally degrade the overall speed. There is an optimum size.**",
        "format": "markdown",
        "sha256": "5bc429fab31d9b537d7bd5e66a94dfb75248f61db8af3c3266d0e85ba65b431c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the cross-coupled PMOS devices, the regeneration benefit, and the eventual capacitance limit. But it incorrectly says added capacitance slows the initial response and restricts the benefit to late-stage regeneration; the golden solution says speed initially improves because stronger regeneration dominates the added capacitance.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3005,
        "output_tokens": 8842,
        "total_tokens": 11847,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3005,
        "output_tokens": 8842,
        "total_tokens": 11847,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not monotonically.\n\n- **Making M5/M6 wider** increases their **gm**, so the **regeneration/latching action gets stronger**.  \n  → This can **speed up** the decision once the latch starts to resolve.\n\n- But wider M5/M6 also add **more capacitance** to nodes **X** and **Y** (diffusion + cross-coupled gate loading).  \n  → That makes those nodes **harder to move**, which **slows the initial transition** and reset.\n\nSo the net result is:\n\n- **If M5/M6 are too small**, increasing them can **improve speed**.\n- **If you keep increasing them**, the extra capacitance starts to dominate and the **overall speed degrades**.\n\nSo for this latch/comparator, there is usually an **optimum size** for M5 and M6 rather than “bigger is always faster.”",
        "format": "markdown",
        "sha256": "259470b33a87f5e0c1567c6d305aac4a8578d2213a18d9a4cef7a54d6110c555"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M5/M6 initially improves speed through stronger regeneration, while added capacitance eventually limits the benefit and can make further widening degrade speed.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3005,
        "output_tokens": 11905,
        "total_tokens": 14910,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11712,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3005,
        "output_tokens": 11905,
        "total_tokens": 14910,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11712,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Generally, **making the clocked transistors wider does not keep improving speed**; beyond a small point, it usually **degrades** it.\n\nWhy:\n- **Benefit:** wider clocked devices have lower \\(R_{on}\\), so the active pull-up/pull-down path gets somewhat stronger.\n- **Penalty:** those same devices add **more diffusion capacitance** directly to nodes **X** and **Y**, and also add **more clock load** on **CK/\\(\\overline{CK}\\)**.\n- In this topology, the clocked device is only **one of two series devices** in the conduction path, so reducing its resistance gives only limited improvement, while the capacitance penalty grows directly with width.\n\nA simple way to see it is:\n\n\\[\nt_{pd} \\approx \\left(R_{\\text{logic}} + \\frac{k}{W_{clk}}\\right)\\left(C_L + c\\,W_{clk}\\right)\n\\]\n\nSo delay has an **optimum** versus \\(W_{clk}\\); it is **not monotonic**.\n\n**Bottom line:**  \n- If the clocked transistors are **too small**, increasing them a bit can help.  \n- If you keep increasing them, the circuit usually becomes **slower overall**.\n\nSo for this circuit, the safe qualitative answer is: **oversizing the clocked transistors tends to degrade speed.**",
        "format": "markdown",
        "sha256": "de4b63d2a172a04da7dc58176ec0fca431c59b7649bddda24a4d6c648ff36643"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says widening initially helps by lowering on-resistance, while added node capacitance eventually limits or reverses the benefit, producing an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 7825,
        "total_tokens": 9888,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7533,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 7825,
        "total_tokens": 9888,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7533,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It’s a **tradeoff**, not a pure improve/degrade.\n\nFor the **CK/\\(\\overline{CK}\\)-controlled transistors** in this C²MOS-style latch/FF:\n\n- **Wider devices reduce \\(R_{on}\\)**  \n  → the pull-up/pull-down path is stronger  \n  → **faster switching** of nodes \\(X\\) and \\(Y\\)\n\n- **But wider devices also increase capacitance**\n  - diffusion capacitance at **\\(X\\)** and **\\(Y\\)**\n  - clock load on **CK** and **\\(\\overline{CK}\\)**  \n  → slower internal nodes and/or slower clock edges\n\nSo:\n\n- **small/moderate width increase**: usually **improves speed**\n- **too much increase**: eventually **degrades speed**\n\nA simple first-order view is:\n\n\\[\nt_{pd} \\sim (R_{\\text{logic}} + R_{\\text{clk}}/k)\\,(C_L + k\\,C_{\\text{par}})\n\\]\n\nwhere \\(k\\) is the clocked-transistor width scale factor.  \nAs \\(k\\) increases, resistance falls, but capacitance rises, so there is an **optimum size**.\n\n### Bottom line\n**Increasing the clocked-transistor widths helps only up to a point.**  \nIf they are currently the resistance bottleneck, speed improves. If they are already large, further widening will **hurt** due to added node and clock capacitance.",
        "format": "markdown",
        "sha256": "e5aee6a5d8f4fede2c5c28ae80ecd56447d276342ea8353894788efedb687167"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening the clocked transistors initially improves speed by reducing their on-resistance, while added node capacitance eventually limits or reverses the benefit, yielding an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 9124,
        "total_tokens": 11187,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 9124,
        "total_tokens": 11187,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not monotonically.\n\nFor this **C²MOS / clocked-inverter** style circuit, increasing the width of the **clocked transistors** has two opposite effects:\n\n- **Helps:** lower \\(R_{on}\\) of the clocked device  \n- **Hurts:** larger diffusion capacitance on the internal nodes **X** and **Y**, plus larger **clock load**\n\nA simple delay view is\n\n\\[\nt_d \\approx (R_{\\text{data}} + R_{\\text{clk}})\\,(C_L + C_{\\text{par,clk}})\n\\]\n\nwith\n\n- \\(R_{\\text{clk}} \\propto 1/W_{\\text{clk}}\\)\n- \\(C_{\\text{par,clk}} \\propto W_{\\text{clk}}\\)\n\nSo as you widen the clocked devices:\n\n- the resistance term gets better,\n- but the node capacitance gets worse.\n\nBecause the data transistor in series is still there, the resistance reduction has **diminishing returns**, while the added capacitance keeps growing.\n\n### Practical conclusion\n- If the clocked transistors are **too small**, a modest increase can improve speed.\n- If you keep increasing them, **speed eventually degrades**.\n- In this topology, **oversizing the clocked transistors usually hurts overall \\(f_{max}\\)** and definitely increases clock power.\n\nSo the best answer is:\n\n**There is an optimum size; making the clocked transistors larger does not always help, and beyond a point it degrades speed.**",
        "format": "markdown",
        "sha256": "109dbd6ef51af018aa0136eb8ce06567d9dbb596a3a6c68d06b3d750fdd310aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by reducing clocked-device on-resistance, while added latch-node capacitance eventually limits or reverses the benefit, producing an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 8519,
        "total_tokens": 10582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8198,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 8519,
        "total_tokens": 10582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8198,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — **if you take the outputs at nodes \\(X\\) and \\(Y\\)**.\n\nThis circuit is essentially a **divide-by-2 master–slave latch loop**. Its operation is:\n\n- **When \\(CK=1\\):** the left latch is transparent, so \\(X\\) updates.\n- **When \\(CK=0\\):** the right latch is transparent, so \\(Y\\) updates.\n- The feedback inverter makes it toggle, so the state sequence is\n\n\\[\n(X,Y):\\ 00 \\rightarrow 01 \\rightarrow 11 \\rightarrow 10 \\rightarrow 00\n\\]\n\nThat means:\n\n- \\(X\\) and \\(Y\\) are both at **\\(f_{CK}/2\\)**\n- one changes **half a clock period** after the other\n\nSince the divided output period is \\(2T_{CK}\\), a shift of \\(T_{CK}/2\\) equals\n\n\\[\n\\frac{T_{CK}/2}{2T_{CK}} \\cdot 360^\\circ = 90^\\circ\n\\]\n\nSo **\\(X\\) and \\(Y\\) are in quadrature**.\n\nImportant nuance:\n\n- **\\(Y\\) and \\(Z\\)** are **not** quadrature; \\(Z\\) is just \\(\\overline{Y}\\), so they are **180° apart**.\n- To use this externally as a quadrature generator, you’d typically **buffer \\(X\\)** as well.\n\nSo the short answer is:\n\n- **Yes**, the structure contains **quadrature phases at \\(X\\) and \\(Y\\)**.\n- **No**, if you mean only **\\(Y\\) and \\(Z\\)**, since those are just complements.",
        "format": "markdown",
        "sha256": "57f993683eb8b9cc0b1f37ee1699fd79efae46c4e1de23871d4b7a2b0426c840"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal quadrature at X and Y from the divide-by-two timing, but omits both reasons the outputs are not exact: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 9905,
        "total_tokens": 11953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 9905,
        "total_tokens": 11953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — ideally **it does provide quadrature outputs**, but **at half the clock frequency**, not at the input clock frequency.\n\nWhy:\n\n- The **left clocked inverter** is active when **CK = 1**.\n- The **right clocked inverter** is active when **CK = 0**.\n- The feedback is **\\( Z = \\overline{Y} \\)**.\n\nSo:\n\n- **X updates on one clock edge**\n- **Y updates on the opposite clock edge**\n\nThat means X and Y change **half an input-clock period apart**. But since this loop is a **divide-by-2**, the output period is **twice** the clock period.\n\nSo the phase shift is:\n\n\\[\n\\Delta \\phi = 360^\\circ \\cdot \\frac{T_{CK}/2}{2T_{CK}} = 90^\\circ\n\\]\n\nSo:\n\n- **X and Y are quadrature**\n- **Z is just \\(\\overline{Y}\\)**, so **X and Z** are also a quadrature pair with opposite polarity\n\nA practical note:\n- For **accurate 90°**, you want a **50% duty-cycle clock**\n- X and Y are internal nodes here, so they usually need **matched buffers** if you want to use them as real outputs\n\nSo the short answer is:\n\n**Yes — this is essentially a ÷2 quadrature generator.**",
        "format": "markdown",
        "sha256": "ab9c886b13fbc9ce7ac3b8bdc9d0d32e3f56432cacca13e5e90b7f0dacb2069c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature from opposite-phase switching. However, it misses the key reasons the outputs are not exact: Inv3 propagation delay and unequal loading of the two latches. The duty-cycle and buffering comments do not explain those intrinsic departures.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 12661,
        "total_tokens": 14709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12360,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 12661,
        "total_tokens": 14709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12360,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—when driven by **CK** and **\\(\\overline{CK}\\)**, it effectively gives **quadrature square-wave outputs**.\n\nWhy:\n- The left clocked inverter is active during one clock phase.\n- The right clocked inverter is active during the opposite clock phase.\n- With the feedback through **Inv\\(_3\\)**, the loop behaves like a **divide-by-2 toggle flip-flop**.\n\nSo:\n- **X** changes on one clock edge,\n- **Y** changes on the opposite clock edge,\n- **Z = \\overline{Y}**.\n\nThat means **X** and **Y** are half the input-clock frequency, and their transitions are separated by **half a clock period**. Since their own period is **twice** the clock period, that separation is:\n\n\\[\n\\frac{T_{CK}/2}{2T_{CK}} \\cdot 360^\\circ = 90^\\circ\n\\]\n\nSo, yes:\n- **X and Y** are in quadrature (\\(\\pm 90^\\circ\\)),\n- and since **Z = \\overline{Y}\\)**, **X and Z** are also a quadrature pair, with opposite polarity sense.\n\nA useful way to see it is the state sequence of \\((X,Z)\\):\n\n\\[\n00 \\rightarrow 10 \\rightarrow 11 \\rightarrow 01 \\rightarrow 00\n\\]\n\nwhich is the classic 4-step quadrature sequence.\n\nCaveats:\n- Exact \\(90^\\circ\\) needs a **50% duty-cycle clock** and roughly matched delays.\n- **X** and **Y** are internal dynamic nodes, so if you want to use them externally, they should be **buffered**.\n- This gives **digital/square-wave quadrature**, not sinusoidal quadrature.",
        "format": "markdown",
        "sha256": "4a69322f07ae2567053a6e4ecf109784cb702cb06c5bb725f30a09e455a63b1f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature and half-cycle transition spacing. However, it gives only a generic matched-delays caveat and omits the specific Inv3 delay that skews Z and the unequal loading of the two latches.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 10906,
        "total_tokens": 12954,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10523,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 10906,
        "total_tokens": 12954,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10523,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this kind of **C²MOS / clocked-inverter latch**, increasing the width of the **clocked transistors** does **not have a single unconditional answer**:\n\n- **Inside the latch itself:** speed usually **improves** at first.  \n  Wider clocked devices → lower \\(R_{on}\\) → less series resistance in the pull-up/pull-down path.\n\n- **But overall:** if you keep making them wider, speed can **stop improving and eventually get worse** at the system level, because:\n  - clock load increases,\n  - clock edges slow down,\n  - parasitic diffusion/internal-node capacitances increase.\n\nSo the practical answer is:\n\n> **Moderate upsizing helps; excessive upsizing hurts. There is an optimum size.**\n\nA simple way to think of one stage delay is:\n\n\\[\nt_{pd} \\approx (R_{\\text{logic}} + R_{\\text{clk}})C_{\\text{out}} + R_{\\text{clk}}C_{\\text{int}}\n\\]\n\nAs clocked transistor width increases:\n- \\(R_{\\text{clk}}\\) decreases  \\(\\rightarrow\\) faster,\n- \\(C_{\\text{int}}\\) and clock capacitance increase  \\(\\rightarrow\\) slower.\n\nSo:\n\n- **If clock is ideal/stiff:** wider clocked devices generally make the latch faster, with diminishing returns.\n- **If real clock-driver loading matters:** too-wide clocked devices can degrade overall speed.\n\nIf you want, I can also show the optimum-sizing intuition for this exact circuit stage by stage.",
        "format": "markdown",
        "sha256": "4ebbeec607ebadfa52cc62b1aff1cca6105e87f979ef050874a86243d3714ebf"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies that wider clocked devices initially improve speed by lowering on-resistance, but omits charge sharing and overemphasizes clock-load and parasitic-capacitance limits.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4260,
        "output_tokens": 16198,
        "total_tokens": 20458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15536,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 8099,
        "total_tokens": 10229,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not monotonically. In this C²MOS/T-flip-flop style circuit, **making the clocked devices wider can help at first**, because their \\(R_{on}\\) drops.\n\nBut **beyond a point it hurts speed** because wider clocked transistors also add:\n\n- more **junction capacitance** on the internal “hidden” nodes,\n- more **clock load** on \\(CK\\) and \\(\\overline{CK}\\),\n- more charge that must be moved every cycle.\n\nSo the delay is a tradeoff:  \n\\[\nt_d \\sim (R_{\\text{logic}} + R_{\\text{clk}})\\,(C_L + C_{\\text{hidden}})\n\\]\nand increasing width makes \\(R_{\\text{clk}}\\downarrow\\) but \\(C_{\\text{hidden}}\\uparrow\\).\n\n**Bottom line:** a small upsizing may improve speed if the clocked transistors are too small, but **oversizing them usually degrades the maximum speed** of this circuit. There is an **optimum width**, not “bigger is always faster.”",
        "format": "markdown",
        "sha256": "1158c793b47c82792a161f67587143f216752ddd42a847326fa36485a2034289"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the initial speed benefit from lower on-resistance, but omits charge sharing and overstates the impact of added internal-node capacitance, which the golden solution says loads the data path little.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4260,
        "output_tokens": 23218,
        "total_tokens": 27478,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22756,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 11609,
        "total_tokens": 13739,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11378,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Generally, **it improves** — but only up to a point.\n\n### Why it improves\nThe clocked transistors are in series with the pull-up/pull-down paths. Increasing their width:\n\n- **reduces \\(R_{on}\\)** of those devices,\n- so the internal nodes charge/discharge faster,\n- which **reduces the latch/FF delay** and can increase max frequency.\n\n### Why the benefit is limited\nWider clocked devices also add:\n\n- **more diffusion capacitance** on the internal stack nodes,\n- **more clock gate capacitance** on \\(CK\\) and \\(\\overline{CK}\\).\n\nFor the **cell itself**, the resistance reduction usually dominates, so delay **decreases and then saturates**.\n\n### Important practical caveat\nIf the **clock driver is not ideal**, the larger clocked transistors load the clock more heavily, which can:\n\n- slow the clock edges,\n- increase power,\n- and eventually **hurt overall system speed**.\n\n## Bottom line\n- **Intrinsic circuit speed:** usually **improves** with wider clocked transistors.\n- **Overall system speed:** can **degrade if you oversize them**, because of clock loading.\n\nSo the real answer is: **speed improves initially, but there is an optimum width; “bigger” is not always better.**",
        "format": "markdown",
        "sha256": "d3526d0268e679063a01d64638be9a30206ed447e9a45109fe512eac7bc3cff9"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening improves speed because it lowers the clocked devices’ on-resistance, but it omits charge sharing, the key swing-degradation limitation identified in the golden solution.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4260,
        "output_tokens": 15138,
        "total_tokens": 19398,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 7569,
        "total_tokens": 9699,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7287,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let the rightmost output be \\(Q\\), and let \\(X\\) be the output of **Inv\\(_1\\)**.\n\n### Operation by clock phase\n\n#### 1. When \\(CK=1\\)\n- Left switch is **closed**\n- Middle switch (\\(\\overline{CK}\\)) is **open**\n\nSo the feedback value \\(Q\\) is applied to Inv\\(_1\\):\n\n\\[\nX = \\overline{Q}\n\\]\n\nThus, during this phase, the circuit computes and stores the complement of the present output.\n\n---\n\n#### 2. When \\(CK=0\\)\n- Left switch is **open**\n- Middle switch is **closed**\n\nNow \\(X\\) is passed to the remaining two inverters. Since two inverters together are non-inverting:\n\n\\[\nQ_{\\text{new}} = X\n\\]\n\nBut from phase 1, \\(X = \\overline{Q_{\\text{old}}}\\). Hence:\n\n\\[\nQ_{\\text{new}} = \\overline{Q_{\\text{old}}}\n\\]\n\n---\n\n## Result\n\nThe output toggles every clock cycle:\n\n\\[\nQ^{+} = \\overline{Q}\n\\]\n\nSo this arrangement behaves as:\n\n- a **T flip-flop with \\(T=1\\)**, or equivalently\n- a **divide-by-2 circuit**\n\nIf \\(Q\\) starts at 0, the sequence is:\n\n\\[\n0 \\to 1 \\to 0 \\to 1 \\to \\dots\n\\]\n\nThus the output frequency is:\n\n\\[\nf_Q = \\frac{f_{CK}}{2}\n\\]\n\n---\n\n## Important practical note\nThis is a **dynamic** arrangement:\n- when a switch opens, some node values are held only by capacitance,\n- so it needs a running clock and cannot store data indefinitely.\n\nAlso, if both switches were ever on at the same time, the loop would momentarily become a **3-inverter ring oscillator**.\n\n## Conclusion\nThe circuit is a **clocked toggle element / frequency divider by 2**, with output changing to its complement on each active clock cycle.",
        "format": "markdown",
        "sha256": "e1e544dd177eb0845022d4922c8d8ac22aee54f53b1ebbab6f7a08dc1752652e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic divide-by-two and explains that the output toggles each clock cycle, giving half the clock frequency. Internal signal details are secondary under the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 7700,
        "total_tokens": 8990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 7700,
        "total_tokens": 8990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming ideal clocked switches and inverters, this is a **clocked feedback loop** that behaves like a **toggle flip-flop** (equivalently, a **divide-by-2** circuit).\n\n### Let the output be \\(Q\\)\nTake \\(Q\\) at the output of the rightmost inverter, which is fed back to the left.\n\n## Phase 1: \\(CK=1\\), \\(\\overline{CK}=0\\)\n- Left switch closes.\n- Right switch opens.\n- So \\(Q\\) is applied to **Inv\\(_1\\)**.\n- Output of Inv\\(_1\\) becomes:\n  \\[\n  \\overline{Q}\n  \\]\n- This value is prepared/stored, but it does **not** yet affect \\(Q\\), because the right switch is open.\n\n## Phase 2: \\(CK=0\\), \\(\\overline{CK}=1\\)\n- Left switch opens.\n- Right switch closes.\n- The stored output of Inv\\(_1\\), i.e. \\(\\overline{Q}\\), is now passed through the last **two inverters**.\n- Two inverters together are **non-inverting**, so the final output becomes:\n  \\[\n  Q_{\\text{next}}=\\overline{Q_{\\text{old}}}\n  \\]\n\nSo after each full clock cycle:\n\\[\nQ_{n+1}=\\overline{Q_n}\n\\]\n\n## Conclusion\n- The circuit **toggles** once every clock period.\n- Therefore its output frequency is:\n  \\[\n  f_{out}=\\frac{f_{CK}}{2}\n  \\]\n- It is essentially a **T flip-flop with \\(T=1\\)**, or a **frequency divider by 2**.\n\n## Practical note\nThis is a **dynamic** arrangement:\n- one internal node is floating in each phase and holds charge,\n- so it needs proper clocking,\n- and the two clock phases should ideally be **non-overlapping**.  \nIf both switches were on at once, the loop would momentarily become a 3-inverter ring, which is undesirable.\n\nIf you want, I can also draw the timing waveforms for \\(CK\\), the internal node, and \\(Q\\).",
        "format": "markdown",
        "sha256": "3e4814444164787aaa492f0807aff9ea90c2c9f5bd92a4205cad4ef2bc4d6d61"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic-latch divide-by-two and explains the toggle behavior. The golden solution explicitly allows full credit without exact internal signal-path analysis.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 10320,
        "total_tokens": 11610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 10320,
        "total_tokens": 11610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming each switch closes when its labeled clock is active:\n\n**This circuit behaves as a dynamic toggle flip-flop, i.e. a divide-by-2.**\n\n### Why\nLet \\(Q\\) be the output of the last inverter.\n\n- The **two rightmost inverters** together are a **non-inverting buffer** overall.\n- The **left inverter** provides the needed inversion in the feedback path.\n\n### Clock phases\n\n#### 1. \\(CK = 1\\)\n- Left switch: **closed**\n- Middle switch: **open**\n\nSo the current output \\(Q\\) is fed into **Inv1**.\n\n- Input of Inv1 = \\(Q\\)\n- Output of Inv1 = \\(\\overline{Q}\\)\n\nThe middle switch is open, so this \\(\\overline{Q}\\) is **not yet transferred** to the right side.  \nThe right-side node simply holds its previous value, so **\\(Q\\) stays unchanged**.\n\n---\n\n#### 2. \\(CK = 0\\)\n- Left switch: **open**\n- Middle switch: **closed**\n\nNow the value already formed by Inv1, namely \\(\\overline{Q_{\\text{old}}}\\), is transferred to the right side.\n\nSince the two rightmost inverters together do not change polarity overall, the output becomes:\n\n\\[\nQ_{\\text{new}}=\\overline{Q_{\\text{old}}}\n\\]\n\nSo the output toggles every clock cycle.\n\n---\n\n## Result\n\\[\nQ_{n+1}=\\overline{Q_n}\n\\]\n\nHence the output sequence is:\n\n- \\(0 \\to 1 \\to 0 \\to 1 \\to \\dots\\)\nor\n- \\(1 \\to 0 \\to 1 \\to 0 \\to \\dots\\)\n\nSo:\n\n\\[\nf_{out}=\\frac{f_{CK}}{2}\n\\]\n\n---\n\n## Interpretation\nThis is equivalent to:\n\n- a **T flip-flop with \\(T=1\\)**, or\n- a **D flip-flop with \\(D=\\overline{Q}\\)**\n\nIt is effectively **negative-edge triggered** (the output changes when control passes from the \\(CK\\) phase to the \\(\\overline{CK}\\) phase).\n\n---\n\n## Important practical note\nThis is a **dynamic** arrangement:\n- one internal node is floating in each half-cycle and stores charge,\n- so the clock must keep running fast enough,\n- and the two clock phases should ideally be **non-overlapping**.\n\nIf both switches were on at the same time, the three inverters would form a closed odd-inverter loop, i.e. a **ring oscillator** momentarily.\n\nIf you want, I can also draw the timing diagram for \\(Q\\) versus \\(CK\\).",
        "format": "markdown",
        "sha256": "bdb8af5810cf446cb89bf19667d01809f97582f7fdd2d7a3e1be52aef5a706fc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a dynamic toggle flip-flop/divide-by-two and notes its dynamic charge-storage behavior. The detailed phase and inverter-path claims are secondary under the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 13019,
        "total_tokens": 14309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 13019,
        "total_tokens": 14309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the red inverter is connected between the same two nodes as the black path, it is **not adding a new logic function**. Electrically, it mostly acts like a **parallel inverter** or a **keeper**.\n\n### Main effect\nIf it is the same size as the black inverter, then:\n\n- **Drive strength on the output node increases**\n  - that node switches faster\n  - it can drive more load\n\n- **Input capacitance on the previous node increases**\n  - the previous stage now has to drive *two* inverter inputs instead of one\n  - this often slows the previous stage down\n\n- **Power increases**\n  - more capacitance is switching\n  - possible extra short-circuit current during transitions\n\n### So does it help overall speed?\n**Not necessarily.**\n\nFor a simple inverter chain or ring oscillator, adding a parallel inverter usually:\n\n- speeds up **that one stage**\n- but loads the **previous stage more**\n\nSo the **total loop delay often stays similar or even gets worse**, unless the red inverter is there to drive a **heavy load** on that node.\n\n### If this is meant as a keeper\nIf the black path can be disconnected by the clocked switches, the red inverter may be there to:\n\n- keep the internal node from floating\n- improve noise immunity / state retention\n- help startup or robustness\n\nIn that case, it is usually made **weak**, so it doesn't disturb timing too much.\n\n### Important caution\nIf the red inverter output is tied directly to another inverter output, and those two inverters are **not always seeing the same input**, they can **fight each other**. That causes:\n\n- extra current\n- slower switching\n- possible malfunction\n\n---\n\n### Short answer\nThe red inverter usually **improves local drive**, but **adds loading and power**.  \nIn a ring/feedback path, it often **does not improve overall performance** unless it is solving a **load-driving** or **node-keeping** problem.\n\nIf you want, I can also analyze this **specifically as a ring oscillator** and estimate whether the oscillation frequency goes up or down.",
        "format": "markdown",
        "sha256": "afe72ce6c981528fe27750b44caa58d964d19cdabac0d0c9669822d32d7325ed"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a parallel inverter or keeper. It misses the feedforward path that bypasses part of the first latch and improves high-speed operation, as well as the unclocked branch's low-frequency drawback that raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 13448,
        "total_tokens": 14607,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13003,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 13448,
        "total_tokens": 14607,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13003,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the red block is a **normal inverter**, it mainly acts like an **extra parallel/keeper path** from the left node to the middle node.\n\n### What it does\n- It gives the middle node a defined value even when the clocked path is not passing the signal.\n- When the black inverter path is also active, the red inverter and black inverter behave like a **stronger inverter** in parallel.\n\n### Performance impact\n\n#### Good\n- **Better node holding / robustness**: less chance of a floating internal node.\n- **Potentially faster transition at the middle node** when both inverters are driving the same value, because the effective output resistance is lower.\n\n#### Bad\n- **More input capacitance** on the left node, since that node now drives one more inverter input.\n- **More dynamic power** and area.\n- In a chain or ring, the extra load on the previous stage often cancels the benefit of the stronger drive, so **overall speed usually improves little, or can even get worse**.\n- It can reduce max oscillation/throughput frequency if the added capacitance dominates.\n\n### Important caveat\nIf the black inverter is **not truly tri-stated** when its input is disconnected, then the red inverter can end up **fighting** it after the left node changes. That causes:\n- extra short-circuit current,\n- slower edges,\n- more power,\n- possibly incorrect operation.\n\nSo in practice, this red inverter is only beneficial if:\n- the other path becomes effectively **high-Z**, or\n- the red inverter is a **weak keeper**.\n\n## Bottom line\nThe red inverter usually improves **robustness/state retention**, but it is **not a free speed boost**. It adds capacitance and power, and unless carefully designed, it can even **hurt performance** or cause **contention**. If you want, I can also analyze this specific circuit phase-by-phase for `CK=0` and `CK=1`.",
        "format": "markdown",
        "sha256": "0ab9ff62c13ce18e8524bf2077afcd04703b08121eaf81689b533cca37ebce5d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It mischaracterizes the red inverter as a keeper or parallel drive path and misses that it bypasses part of the first latch, improving high-speed operation. It also omits the key low-frequency drawback: the unclocked branch can overpower the main path and raise the minimum usable clock frequency. Its mention of possible contention is only a small, nonspecific piece of relevant understanding.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 12534,
        "total_tokens": 13693,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12121,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 12534,
        "total_tokens": 13693,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12121,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the red inverter is intentionally connected between the **same two nodes** as the left black inverter, it does **not** add a new delay stage in series. It acts like a **parallel/helper inverter**.\n\n### Main effect\nIt is roughly equivalent to making that stage a **stronger inverter**:\n\n- **Drive strength increases**  \n  Effective output resistance goes down, so that node can switch faster.\n\n- **Capacitance increases**  \n  The previous stage now has to drive one more inverter input, and the driven node has extra parasitic capacitance.\n\nSo the tradeoff is:\n\n- **potentially faster local transition**\n- **more loading on the previous stage**\n- **higher dynamic power**\n\n### In oscillator terms\nIf this is a **gated ring oscillator**, the red inverter is often used to:\n\n- keep the internal node from floating,\n- preserve state/phase when the gated path is off,\n- help restart cleanly,\n- and sometimes maintain the required odd inversion in the active loop.\n\n### Important caveat\nIf the black inverter is a **normal inverter** and not a **tri-state/clocked inverter**, then the red inverter can be a problem:\n\n- both inverter outputs are tied together,\n- if they do not switch at exactly the same time, they can **fight each other**,\n- causing **contention current**, extra power, slower edges, and possibly wrong behavior.\n\n### Bottom line\nThe red inverter usually improves **robustness and state retention**, and can improve **edge speed locally**, but it also adds **capacitance and power**.  \nSo overall performance may improve or worsen depending on sizing and whether the other inverter is truly tri-stated when “off.”\n\nIf you want, I can also analyze this **specifically as a ring oscillator** and say whether it increases or decreases the oscillation frequency.",
        "format": "markdown",
        "sha256": "42ab8286341bb52634d565d947f3cfb556314a88681a738cb83d4bdb3328e96e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the connection as a parallel/helper inverter. The red inverter is an unclocked feedforward path that bypasses the CK switch and Inv1: it improves high-speed operation but can dominate and corrupt the path at low clock rates, raising the minimum usable frequency. The proposed state-retention/keeper explanation misses this central mechanism.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 13333,
        "total_tokens": 14492,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 13333,
        "total_tokens": 14492,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No.\n\nThe quoted answer is wrong in two key ways:\n\n1. **It does not form a cross-coupled latch with Inv1.**  \n   A cross-coupled latch needs each inverter’s output to drive the other inverter’s input. Here, the red inverter and **Inv1** both drive the **same output node**. They are not cross-coupled.\n\n2. **It does not remove the minimum-frequency problem.**  \n   The leakage-sensitive dynamic nodes are the **floating nodes after the clocked switches** (the inputs of the black inverters when their switches are open).  \n   The red inverter does **not** restore charge on those nodes, so it cannot make the circuit truly static.\n\n### Why it cannot be a true keeper\nLook at the two clock phases:\n\n- **CK = 1**: left switch on, right switch off  \n  Then node \\(B\\) (output of Inv1) is just \\(\\overline{A}\\).  \n  The red inverter agrees with Inv1 here.\n\n- **CK = 0**: left switch off, right switch on  \n  The two rightmost inverters make \\(A = B\\).  \n  So the red inverter drives \\(B \\leftarrow \\overline{A} = \\overline{B}\\).\n\nSo during this phase, the red inverter is actually trying to drive **the opposite** of the stored value at \\(B\\). A strong inverter there would not “keep” the state — it would create contention, and in the loop\n\\[\nB \\to \\text{Inv2} \\to \\text{Inv3} \\to \\text{red inv} \\to B\n\\]\nyou effectively have an **odd-inversion feedback path**, i.e. oscillator-like behavior.\n\n### So what is the red inverter actually for?\nIts real role is typically as a **weak assist / speed-up / preconditioning inverter**, not a true static keeper.\n\nIt can:\n\n- help drive the intermediate node during the active phase,\n- start nudging that node toward the **next** value one half-cycle early,\n- improve transition speed / edge rate,\n- sometimes improve noise tolerance a bit.\n\nSo it may make the circuit **quasi-static at best**, but it does **not** eliminate the dynamic storage/leakage issue the way a real keeper would.\n\n### If you wanted a real keeper...\nA true keeper would be connected so it refreshes the **floating storage node itself** with the correct polarity. That is **not** what this red inverter is doing.\n\nSo the short answer is:\n\n- **No, I do not agree with that answer.**\n- The red inverter is **not** a cross-coupled keeper latch.\n- Its actual role is a **weak auxiliary feedback path for speed/conditioning**, not for removing the minimum clock frequency limit.",
        "format": "markdown",
        "sha256": "babd889663affee68f6adff090464405022b35466d913bce44f72f3949fd27db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly rejects the keeper interpretation and recognizes speed assistance and an odd-inversion loop. However, it mischaracterizes the red inverter as an auxiliary feedback path and attributes the frequency limit to leakage, missing the key feedforward bypass and the low-frequency failure where that branch can overpower the intended latch behavior.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 26049,
        "total_tokens": 27253,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25458,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 26049,
        "total_tokens": 27253,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25458,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No — not for the schematic as drawn.\n\n### Why that answer is wrong\nA **keeper / half-latch** would have to feed **back** to the **floating storage node**.  \nHere, the red inverter does **not** do that.\n\nAs drawn, the red inverter goes from the **left node** to the **middle node** in the **same direction** as `Inv1` when the left switch is on. So it is **not cross-coupled** with `Inv1`.\n\nA true keeper for the first stage would connect roughly:\n\n- **from `Inv1` output**\n- **back to the node at `Inv1` input**  \n  (the node *after* the `CK` switch, which is the node that actually floats)\n\nThat is not what this red inverter is connected to.\n\n---\n\n### Quick phase check\nLet:\n\n- `X` = leftmost node / output of the last inverter\n- `Y` = node between `Inv1` and the `\\bar{CK}` switch\n\nThen:\n\n- When `CK` phase makes the left switch active, `Inv1` gives  \n  `Y = ¬X`\n- When `\\bar{CK}` makes the right switch active, the two right inverters give  \n  `X = Y`\n\nSo if the red inverter is always active and also enforces `Y = ¬X`, then during the second phase you get:\n\n- `X = Y`\n- `Y = ¬X`\n\nwhich implies `Y = ¬Y`\n\nThat is not a stored state; it is contention / a regenerative odd-inverter loop, not a clean keeper action.\n\n---\n\n### Actual role of the red inverter\nAs drawn, its electrical role is just:\n\n- an **always-on inverter from `X` to `Y`**\n- effectively **bypassing the left clocked switch**\n- and, when the left switch is on, acting like an **extra inverter in parallel** with `Inv1`\n\nSo it is **not** a proper keeper that removes the minimum-frequency problem.\n\n---\n\n### Most likely conclusion\nOne of these is true:\n\n1. **The explanation is wrong**, or\n2. **The red inverter is drawn wrong** and was *intended* to be a weak feedback keeper in the **opposite direction**\n\nIf it were drawn the other way — from `Inv1` output back to the floating input node — then the “keeper / pseudo-static latch” explanation would make sense.\n\nAlso, even then, **one keeper alone would not remove all minimum-clock-frequency issues**, because the node after the `\\bar{CK}` switch is still a dynamic node too.\n\nIf you want, I can redraw the **correct keeper connection** for this circuit.",
        "format": "markdown",
        "sha256": "065e7ca8af956212167266f3de7972a0e08e144e353ca7946255a581095e60b0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the always-on feedforward path bypassing the clocked path, including the odd-inverter loop. It misses the key tradeoff—speeding high-rate operation but corrupting low-rate operation and raising the minimum usable clock frequency—and unnecessarily speculates that the drawing may be wrong.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 26316,
        "total_tokens": 27520,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25742,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 26316,
        "total_tokens": 27520,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25742,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No.\n\nThe quoted answer describes a **real keeper**, but that is **not what the red inverter is doing in this drawing**.\n\n### Why that answer is wrong\nA keeper/staticizer would have to feed back the output of `Inv1` to the **floating input node** of `Inv1` when the clocked switch opens.\n\nIn other words, to make a latch with `Inv1`, the extra inverter should be connected like this:\n\n- input: `Inv1` output\n- output: node **between CK switch and Inv1**\n\nThat would create a **cross-coupled pair** and hold the sampled value statically.\n\nBut the red inverter in the figure is connected:\n\n- input: left node\n- output: `Inv1` output node\n\nSo it is **not cross-coupled with `Inv1`**. It is just **another inverter in parallel with `Inv1`**, driving the same node in the same polarity.\n\n---\n\n### A quick sanity check\nCall the left node `A` and the node after `Inv1` / red inverter `B`.\n\nThe red inverter enforces:\n\n\\[\nB = \\overline{A}\n\\]\n\nWhen the right-hand transmission gate is on, the two black inverters on the right make:\n\n\\[\nA = B\n\\]\n\nSo together you get:\n\n\\[\nB = \\overline{B}\n\\]\n\nThat is **not a bistable latch condition**. It is an **odd-inversion feedback loop**, not a keeper.\n\nSo the statement “it removes the minimum clock frequency requirement due to leakage” is not correct.\n\n---\n\n### Also: even a real keeper there wouldn’t fully solve leakage\nThis circuit has **more than one dynamic node**.  \nSo even if you added a proper keeper around `Inv1`, the whole circuit would **still not automatically become fully static** unless the other dynamic node(s) were also protected.\n\n---\n\n## What is the red inverter actually doing?\nAs drawn, its actual effect is:\n\n- when `CK` is active, it **reinforces** `Inv1` and can help drive/speed that internal node\n- when the other phase is active, it **fights** the stored state unless it is made very weak\n\nSo it is **not a keeper** in the usual sense.\n\n### Most likely interpretations:\n1. **The schematic/annotation is wrong** if the intent was “keeper.”\n2. If intentional, it is more like a **weak feedback/speed-up inverter** on the recirculating path, not a static latch element.\n\n---\n\n## Bottom line\n- **I do not agree** with the quoted answer.\n- The red inverter **does not form a cross-coupled latch with `Inv1`**.\n- A true keeper would be connected to the **input of `Inv1`**, not in parallel with its output path.\n- As drawn, the red inverter is at best a **helper/feedback inverter**, and at worst it introduces **contention/instability**.",
        "format": "markdown",
        "sha256": "aa94839a551a3a3f43741780e6bed9d2655c5cbd24698cc458d82694ce619d4d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and notes possible speedup and contention. However, it mischaracterizes the red inverter as parallel/feedback rather than a feedforward branch bypassing the CK switch and Inv1, and misses the key tradeoff: it helps at high clock rates but can overpower the dynamic latch at low rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 21777,
        "total_tokens": 22981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21150,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 21777,
        "total_tokens": 22981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21150,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the CMOS inverter as one transconductor with\n\n\\[\ng_{mT}=g_{m1}+g_{m2}, \\qquad r_o = r_{o1}\\parallel r_{o2}\n\\]\n\nand open-loop gain\n\n\\[\nA_0 \\approx g_{mT} r_o .\n\\]\n\n### 1) Keep \\(R_{in}=50\\,\\Omega\\)\n\nFor this resistive-feedback inverter,\n\n\\[\nR_{in}\\approx \\frac{R_F+r_o}{1+g_{mT}r_o}\n\\]\n\nand, if gain is reasonably large, this is often written as\n\n\\[\nR_{in}\\approx \\frac{R_F}{1+A_0}.\n\\]\n\nSo the feedback resistor must be chosen as\n\n\\[\nR_F = 50(1+g_{mT}r_o)-r_o\n\\]\n\nor approximately\n\n\\[\nR_F \\approx 50(1+A_0).\n\\]\n\n---\n\n### 2) Noise figure\n\nIgnoring parasitic gate noise for a first-order result, the input-referred thermal noise is approximately\n\n\\[\n\\overline{v_{n,in}^2}\n\\approx 4kT\\left[\n\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}{(g_{m1}+g_{m2})^2}\n+\\frac{50^2}{R_F}\n\\right].\n\\]\n\nThus, with a \\(50\\,\\Omega\\) source,\n\n\\[\nF \\approx 1+\n\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}\n{(g_{m1}+g_{m2})^2\\cdot 50}\n+\\frac{50}{R_F}.\n\\]\n\nIf \\(\\gamma_n\\approx\\gamma_p=\\gamma\\),\n\n\\[\nF \\approx 1+\\frac{\\gamma}{50\\,g_{mT}}+\\frac{50}{R_F}.\n\\]\n\n---\n\n### 3) What minimizes NF?\n\nFrom the expression above:\n\n- increasing \\(g_{mT}\\) lowers the transistor-noise term,\n- increasing \\(R_F\\) lowers the resistor-noise term.\n\nBut \\(R_F\\) cannot be arbitrary because \\(R_{in}\\) must stay at \\(50\\,\\Omega\\).  \nSo the way to optimize NF is:\n\n## Increase the core gain/transconductance as much as practical, then re-choose \\(R_F\\) so that \\(R_{in}=50\\,\\Omega\\).\n\nIn other words:\n\n- maximize \\(g_{m1}+g_{m2}\\),\n- keep \\(r_o\\) as large as possible,\n- then set \\(R_F\\) from the matching equation above.\n\n---\n\n### 4) Practical design meaning\n\nSo, for minimum NF:\n\n- use both \\(M_1\\) and \\(M_2\\) to get large total \\(g_m\\),\n- bias near the inverter switching point so both devices contribute,\n- increase device width / bias current to raise \\(g_m\\),\n- keep enough channel length to preserve \\(r_o\\),\n- make \\(R_F\\) as large as the 50-\\(\\Omega\\) match allows.\n\n---\n\n### 5) Important insight\n\nIf you use only \\(g_m\\) matching, then \\(g_m \\approx 1/50 = 20\\,\\text{mS}\\), and the NF floor is roughly the common-gate-type limit.\n\nWith resistive feedback, you can choose\n\n\\[\ng_{mT} > 20\\,\\text{mS}\n\\]\n\nand let \\(R_F\\) enforce the 50-\\(\\Omega\\) input match.  \nThat is exactly how this topology gets a lower NF than a simple direct \\(g_m\\)-matched input stage.\n\n---\n\n### Final answer\n\n**To optimize NF while keeping \\(R_{in}=50\\,\\Omega\\): maximize \\(g_m\\) and open-loop gain \\(A_0=g_m r_o\\), then choose \\(R_F\\) so that**\n\\[\nR_{in}=\\frac{R_F+r_o}{1+g_m r_o}=50\\,\\Omega.\n\\]\n**In the first-order model there is no finite internal optimum; NF keeps improving as \\(g_m\\) and gain increase. Practical limits are power, bandwidth, stability, and parasitics.**\n\nIf you want, I can also derive the NF expression step-by-step from the small-signal/noise model of this exact circuit.",
        "format": "markdown",
        "sha256": "db0742f1615ebcec6fcdcaef961f1a8efd081a36c26c98569acadbb8fed0cf20"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It uses the finite-output-resistance input-match relation, explains that gm can exceed 1/50 S with RF adjusted to maintain the match, and concludes that increasing gm can reduce NF below the gm-matched limit. This matches the golden solution’s full-credit rule.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 24131,
        "total_tokens": 26598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 24131,
        "total_tokens": 26598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(C_1\\) is an AC short at the frequency of interest, and let\n\n- \\(g_m = g_{m1}+g_{m2}\\)\n- \\(r_o = r_{o1}\\parallel r_{o2}\\)  (and any load, if present)\n\nThen this inverter with shunt feedback has input resistance\n\n\\[\nR_{in}=\\frac{R_F+r_o}{1+g_m r_o}\n\\]\n\nSo the constraint \\(R_{in}=50\\ \\Omega\\) gives\n\n\\[\nR_F = 50(1+g_m r_o)-r_o\n\\]\n\nor, for large gain, roughly\n\n\\[\nR_F \\approx 50\\,g_m r_o\n\\]\n\n---\n\n### Noise figure\nIgnoring flicker noise, gate resistance noise, and induced-gate noise, the NF is approximately\n\n\\[\nF \\approx 1+\\frac{50}{R_F}\n+\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}\n{50\\,(g_{m1}+g_{m2})^2}\n\\]\n\nIf \\(\\gamma_n\\approx\\gamma_p=\\gamma\\), this becomes\n\n\\[\nF \\approx 1+\\frac{50}{R_F}+\\frac{\\gamma}{50\\,g_m}\n\\]\n\nSo:\n\n- \\(\\frac{50}{R_F}\\) is the **feedback resistor noise**\n- \\(\\frac{\\gamma}{50g_m}\\) is the **MOS noise**\n\n---\n\n## Optimization rule\nWith \\(R_{in}\\) fixed at \\(50\\,\\Omega\\), NF is minimized by:\n\n1. **Make total \\(g_m\\) as large as possible**\n   - larger devices and/or more bias current\n   - both \\(M_1\\) and \\(M_2\\) should contribute\n\n2. **Make \\(r_o\\) as large as possible**\n   - increases intrinsic gain \\(g_m r_o\\)\n   - allows a larger \\(R_F\\), which reduces feedback-resistor noise\n\n3. **Then choose \\(R_F\\) from**\n   \\[\n   R_F = 50(1+g_m r_o)-r_o\n   \\]\n\n---\n\n## Important conclusion\nIf the **only** constraint is \\(R_{in}=50\\ \\Omega\\), there is **no finite mathematical optimum**:  \nNF keeps improving as \\(g_m\\) and \\(g_m r_o\\) increase.\n\nSo the practical optimum is set by other limits such as:\n\n- power/current\n- bandwidth\n- stability\n- linearity\n- input capacitance\n\n---\n\n## Practical design takeaway\nFor this topology, the best NF under a 50-Ω match is obtained by:\n\n- **high \\(g_m\\)**\n- **high intrinsic gain \\(g_m r_o\\)**\n- **large \\(R_F\\)** set by the 50-Ω condition\n\nIf NF is the top priority, a better strategy is often to keep the **port** at 50 Ω with a passive matching network, rather than forcing the active core itself to look like 50 Ω through noisy resistive feedback.\n\nIf you want, I can also derive the full NF expression step-by-step from the small-signal model.",
        "format": "markdown",
        "sha256": "42e8acba59a839c134dd473a15ab864d03c2942875cbce3e6fa2fe485ba34f33"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Uses the finite-output-resistance input-match relation and adjusts RF as gm increases, correctly identifying that higher gm and intrinsic gain can reduce NF beyond the 1+γ limit. The extra practical comments do not undermine the core answer.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2467,
        "output_tokens": 26583,
        "total_tokens": 29050,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25898,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2467,
        "output_tokens": 26583,
        "total_tokens": 29050,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25898,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this **resistive-feedback CMOS inverter**, the NF is minimized by making the **inverter as “strong” and high-gain as possible**, then choosing \\(R_F\\) so the input still looks like **50 \\(\\Omega\\)**.\n\n### 1) Input-match constraint\nLet\n\n- \\(G_m = g_{m1}+g_{m2}\\)\n- \\(R_o \\approx r_{o1}\\parallel r_{o2}\\parallel R_L\\)\n\nThen, to first order,\n\n\\[\nR_{in} \\approx \\frac{R_F+R_o}{1+G_m R_o}\n\\]\n\nSo forcing\n\n\\[\nR_{in}=50\\ \\Omega\n\\]\n\ngives\n\n\\[\nR_F = 50(1+G_mR_o)-R_o\n\\]\n\nIf \\(R_o\\gg 50\\ \\Omega\\), this becomes the familiar approximation\n\n\\[\nR_F \\approx 50(1+|A_v|), \\qquad |A_v|\\approx G_mR_o\n\\]\n\nSo a **larger open-loop gain** lets you use a **larger \\(R_F\\)** while keeping \\(R_{in}=50\\ \\Omega\\).\n\n---\n\n### 2) Noise factor\nIgnoring \\(1/f\\) noise and gate-induced noise, a good first-order NF expression is\n\n\\[\nF \\approx 1\n+ \\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}{(g_{m1}+g_{m2})^2 \\, 50}\n+ \\frac{50}{R_F}\n\\]\n\nor, if \\(\\gamma_n\\approx\\gamma_p\\approx \\gamma\\),\n\n\\[\nF \\approx 1 + \\frac{\\gamma}{50\\,G_m} + \\frac{50}{R_F}\n\\]\n\nwith\n\n\\[\nNF = 10\\log_{10}(F)\n\\]\n\n### Interpretation\n- **MOS noise term** \\(\\propto 1/G_m\\): increase total transconductance to reduce it.\n- **Feedback resistor noise term** \\(\\propto 1/R_F\\): increase \\(R_F\\) to reduce it.\n- But \\(R_F\\) is tied to the 50-\\(\\Omega\\) match, so the way to increase \\(R_F\\) is to increase **loop gain** \\(G_mR_o\\).\n\n---\n\n## 3) Optimization rule\nSo, **with \\(R_{in}=50\\ \\Omega\\) fixed**, the NF is improved by:\n\n1. **Maximizing \\(G_m=g_{m1}+g_{m2}\\)**  \n   - larger devices\n   - lower \\(V_{ov}\\)\n   - more bias current if allowed\n\n2. **Maximizing \\(R_o\\)**  \n   - longer channel lengths\n   - lighter loading\n   - cascode, if topology changes are allowed\n\n3. **Then re-setting \\(R_F\\)** from  \n   \\[\n   R_F = 50(1+G_mR_o)-R_o\n   \\]\n\n---\n\n## 4) Practical design implications\n- Bias the inverter near its switching point so **both M1 and M2 contribute gm**.\n- Size PMOS/NMOS so both give useful transconductance; typically \\(W_p/W_n \\sim \\mu_n/\\mu_p\\).\n- Make \\(C_1\\) large enough that its reactance is negligible in-band.\n- The real limit is usually not the simple equations above, but:\n  - input capacitance/bandwidth\n  - linearity\n  - stability\n  - power\n\n---\n\n## 5) Important conclusion\nIn this topology, **there is no separate finite NF optimum once \\(R_{in}=50\\ \\Omega\\) is enforced**.  \nThe first-order result is:\n\n> **Use the largest feasible \\(G_m\\) and \\(G_mR_o\\), then choose \\(R_F\\) to keep the input at 50 \\(\\Omega\\).**\n\nIf you want, I can also derive the **exact small-signal/NF equations** for this circuit step by step.",
        "format": "markdown",
        "sha256": "5de63897bb4d1608e33a9d9581427d9b18de9d21e09525d40a31f0cf70254887"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Uses the finite-output-resistance input-match relation and adjusts RF as gm increases, so gm is not pinned at 1/50 Ω and the NF can fall below 1 + γ. The recommendation to increase gm and RF while maintaining the match is correct; minor first-order modeling details do not change the conclusion.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2467,
        "output_tokens": 26938,
        "total_tokens": 29405,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26064,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2467,
        "output_tokens": 26938,
        "total_tokens": 29405,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26064,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming a small-signal analysis, with \\(V_{DD}\\) and \\(V_b\\) as ac ground, \\(I_{SS}\\) ideal, and neglecting transistor \\(r_o\\)'s:\n\n1. The gain from node \\(P\\) to node \\(X\\) is approximately\n\\[\nv_X \\approx g_{m1}R_{D1}\\,v_P\n\\]\n\n2. The gain from \\(X\\) to the output is approximately\n\\[\nv_{out} \\approx -g_{m2}R_{D2}\\,v_X\n\\]\n\nSo the overall voltage gain from the input node to the output is\n\\[\nA_v \\equiv \\frac{v_{out}}{v_P}\\approx -g_{m1}g_{m2}R_{D1}R_{D2}.\n\\]\n\nNow write KCL at the input node \\(P\\):\n\n\\[\ni_{in}= sC_{in}v_P + g_{m1}v_P + \\frac{v_P-v_{out}}{R_F}.\n\\]\n\nUsing \\(v_{out}=A_v v_P\\),\n\n\\[\ni_{in}=\\left[sC_{in}+g_{m1}+\\frac{1-A_v}{R_F}\\right]v_P.\n\\]\n\nHence the input impedance is\n\n\\[\n\\boxed{\nZ_{in}(s)=\\frac{v_P}{i_{in}}\n=\\left[sC_{in}+g_{m1}+\\frac{1-A_v}{R_F}\\right]^{-1}\n}\n\\]\n\nand substituting \\(A_v\\),\n\n\\[\n\\boxed{\nZ_{in}(s)\\approx\n\\left[\nsC_{in}+g_{m1}+\n\\frac{1+g_{m1}g_{m2}R_{D1}R_{D2}}{R_F}\n\\right]^{-1}\n}\n\\]\n\nSo the low-frequency input resistance is\n\n\\[\n\\boxed{\nR_{in}\\approx\n\\frac{1}{\ng_{m1}+\\dfrac{1+g_{m1}g_{m2}R_{D1}R_{D2}}{R_F}\n}\n=\n\\frac{R_F}{\n1+g_{m1}R_F+g_{m1}g_{m2}R_{D1}R_{D2}\n}\n}\n\\]\n\nEquivalently,\n\n\\[\nR_{in}\\approx\n\\left(\\frac{1}{g_{m1}}\\right)\\parallel\n\\left(\\frac{R_F}{1+g_{m1}g_{m2}R_{D1}R_{D2}}\\right).\n\\]\n\nIf you want, I can also derive this including \\(r_o\\) effects.",
        "format": "markdown",
        "sha256": "3038bc1f61fbcb788e5e834e9e1a317796794297ad1b48bcdeee9729a1ffc0fe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that feedback through RF lowers the input resistance, but the model adds an unsupported gm1 input-conductance term, uses the wrong gain, and omits RD2 in the feedback path. It therefore misses the required result, Rin = (RF + RD2)/(1 + A0).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 28563,
        "total_tokens": 28773,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27970,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 28563,
        "total_tokens": 28773,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27970,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_p\\) be the small-signal voltage at node \\(P\\), and \\(v_o\\) at \\(V_{out}\\).\n\nBecause the MOS gate draws essentially zero current, the input current goes only into:\n\n- the input capacitance \\(C_{in}\\), and\n- the feedback resistor \\(R_F\\).\n\nSo,\n\n\\[\ni_{in}=sC_{in}v_p+\\frac{v_p-v_o}{R_F}\n\\]\n\nIf the amplifier core has small-signal gain\n\n\\[\nA_v(s)\\equiv \\frac{v_o}{v_p},\n\\]\n\nthen the input impedance is\n\n\\[\nZ_{in}(s)=\\frac{v_p}{i_{in}}\n=\\left[sC_{in}+\\frac{1-A_v(s)}{R_F}\\right]^{-1}.\n\\]\n\n---\n\n### Low-frequency result\n\nAt low frequency, ignore \\(C_{in}\\):\n\n\\[\nR_{in}=\\frac{R_F}{1-A_v}.\n\\]\n\nSince this amplifier is inverting, \\(A_v<0\\), so\n\n\\[\nR_{in}=\\frac{R_F}{1+|A_v|}.\n\\]\n\n---\n\n### Gain of the amplifier core\n\nUsing the usual small-signal approximations (\\(r_o\\) neglected, ideal \\(I_{SS}\\)):\n\n#### First stage\n\\[\n\\frac{v_x}{v_p}\\approx -g_{m1}R_{D1}\n\\]\n\n#### Second stage\nThe \\(M_2\\)-\\(M_3\\) pair gives\n\n\\[\n\\frac{v_o}{v_x}\\approx \n\\left(\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\right)R_{D2}\n\\]\n\nSo the overall gain is\n\n\\[\nA_v \\approx \n-\\,g_{m1}R_{D1}\n\\left(\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\right)R_{D2}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nR_{in}\\approx\n\\frac{R_F}{\n1+\ng_{m1}R_{D1}\n\\left(\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\right)R_{D2}\n}\n}\n\\]\n\n---\n\n### If \\(M_2\\) and \\(M_3\\) are matched\nIf \\(g_{m2}=g_{m3}=g_m\\), then\n\n\\[\n\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}=\\frac{g_m}{2},\n\\]\n\nso\n\n\\[\n\\boxed{\nR_{in}\\approx\n\\frac{R_F}{1+\\frac12 g_{m1}g_m R_{D1}R_{D2}}\n}\n\\]\n\nand including \\(C_{in}\\),\n\n\\[\n\\boxed{\nZ_{in}(s)=\n\\left[\nsC_{in}+\n\\frac{1-A_v}{R_F}\n\\right]^{-1}\n}\n\\]\n\nwith \\(A_v\\) as above.\n\nIf you want, I can also derive this step-by-step from the small-signal equivalent circuit.",
        "format": "markdown",
        "sha256": "d59d3440e8f9ee256e20c9a84ef0aabcd950f26c9cdb2c52a52f6033431086d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the Miller reduction and gives an approximately correct unloaded gain, but omits the output resistance contribution: the exact result is (RF + RD2)/(1 + A0), not RF/(1 + A0).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 17796,
        "total_tokens": 18006,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 17796,
        "total_tokens": 18006,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume the usual small-signal model:\n\n- \\(V_{DD}\\) and \\(V_b\\) are ac grounds\n- \\(I_{SS}\\) is ideal\n- MOS gate currents are zero\n- channel-length modulation is neglected\n\nLet the input-node voltage be \\(v_p\\).\n\n### 1) Gain from \\(v_p\\) to node \\(x\\)\nFor \\(M_1\\),\n\n\\[\nv_x=-g_{m1}R_{D1}v_p\n\\]\n\n### 2) Small-signal action of \\(M_2\\)-\\(M_3\\)\n\\(M_2\\) and \\(M_3\\) form a pMOS source-coupled pair. If \\(v_s\\) is their common-source node,\n\n\\[\ng_{m2}(v_s-v_x)+g_{m3}v_s=0\n\\]\n\nso\n\n\\[\nv_s=\\frac{g_{m2}}{g_{m2}+g_{m3}}\\,v_x\n\\]\n\nThus the small-signal current delivered by \\(M_3\\) into the output node is\n\n\\[\ni_o=g_{m3}v_s\n=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\,v_x\n\\]\n\nDefine\n\n\\[\nG_m \\equiv \\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\n\\]\n\nthen \\(i_o=G_m v_x\\).\n\n### 3) Output-node equation\nAt \\(v_{out}\\),\n\n\\[\n\\frac{v_o}{R_{D2}}+\\frac{v_o-v_p}{R_F}=i_o\n\\]\n\nwith \\(v_x=-g_{m1}R_{D1}v_p\\), so\n\n\\[\ni_o=-g_{m1}R_{D1}G_m\\,v_p\n\\]\n\n### 4) Input-node equation\nAt the input,\n\n\\[\ni_{in}=sC_{in}v_p+\\frac{v_p-v_o}{R_F}\n\\]\n\nEliminating \\(v_o\\), the input impedance is\n\n\\[\nZ_{in}(s)=\\frac{v_p}{i_{in}}\n=\n\\left[\nsC_{in}\n+\n\\frac{1+g_{m1}R_{D1}R_{D2}G_m}{R_F+R_{D2}}\n\\right]^{-1}\n\\]\n\ni.e.,\n\n\\[\n\\boxed{\nZ_{in}(s)=\n\\left(\\frac{R_F+R_{D2}}\n{1+g_{m1}R_{D1}R_{D2}\\,\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}}\\right)\n\\parallel \\frac{1}{sC_{in}}\n}\n\\]\n\nSo the **low-frequency input resistance** is\n\n\\[\n\\boxed{\nR_{in}=\n\\frac{R_F+R_{D2}}\n{1+g_{m1}R_{D1}R_{D2}\\,\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}}\n}\n\\]\n\nIf you want, I can also give the simplified result for the matched case \\(g_{m2}=g_{m3}\\).",
        "format": "markdown",
        "sha256": "bb37594ad95bfa0f19667c9e091fc2fcb719fc2ab13de56ccf859805bbd1314e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact \u001b[?25linput resistance with the required numerator RF + RD2 and the correct gain denominator. The effective transconductance reduces to gm2,3/2 for a matched M2-M3 pair, as in the golden solution; the added input-capacitance term is ancillary.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 29193,
        "total_tokens": 29403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28462,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 29193,
        "total_tokens": 29403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28462,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the LDO noise as a small supply-noise source driving the VCO, then pass it through the VCO’s **supply-to-phase** transfer.\n\n### 1) Get the noise at the VCO supply node\nIf \\(S_{th}(f)\\) is already the LDO **output-voltage noise PSD** at \\(V_{out}\\) \\([\\mathrm{V^2/Hz}]\\), then\n\n\\[\nS_{vdd}(f)=S_{th}(f).\n\\]\n\nIf \\(S_{th}\\) is an internal LDO noise source (or a current-noise PSD), first convert it to output-voltage noise with the LDO/output-network transfer function:\n\n\\[\nS_{vdd}(f)=|H_{\\text{LDO},n}(j2\\pi f)|^2\\,S_{th}(f).\n\\]\n\n---\n\n### 2) Convert supply noise to VCO phase noise\nIn general,\n\n\\[\nS_{\\phi}(f_m)=|H_{vdd\\to \\phi}(j2\\pi f_m)|^2\\,S_{vdd}(f_m)\n\\]\n\nwhere:\n\n- \\(f_m\\) = offset from the carrier\n- \\(H_{vdd\\to\\phi}\\) = supply-noise-to-phase transfer of the VCO\n\nThis is the most general expression.\n\n---\n\n### 3) Low-offset / supply-pushing approximation\nUsually, supply noise causes **frequency modulation** of the oscillator:\n\n\\[\n\\delta f(t)=K_{\\text{push}}\\,v_{dd,n}(t)\n\\]\n\nwith\n\n\\[\nK_{\\text{push}}=\\frac{\\partial f_0}{\\partial V_{DD}} \\qquad [\\mathrm{Hz/V}]\n\\]\n\nThen phase is the integral of frequency:\n\n\\[\n\\phi_n(t)=2\\pi\\int \\delta f(t)\\,dt\n\\]\n\nso the phase-noise PSD becomes\n\n\\[\nS_{\\phi}(f_m)=\\left(\\frac{K_{\\text{push}}}{f_m}\\right)^2 S_{vdd}(f_m)\n\\]\n\nor, if you use angular sensitivity \\(K_\\omega=\\partial \\omega_0/\\partial V_{DD}\\) \\([\\mathrm{rad/s/V}]\\),\n\n\\[\nS_{\\phi}(f_m)=\\left(\\frac{K_\\omega}{2\\pi f_m}\\right)^2 S_{vdd}(f_m).\n\\]\n\n---\n\n### 4) Convert to the usual SSB phase noise\nUsing the usual small-noise convention,\n\n\\[\n\\mathcal{L}(f_m)\\approx \\frac{1}{2} S_{\\phi}(f_m)\n\\]\n\nso\n\n\\[\n\\boxed{\n\\mathcal{L}(f_m)\\approx \\frac{1}{2}\\left(\\frac{K_{\\text{push}}}{f_m}\\right)^2 S_{vdd}(f_m)\n}\n\\]\n\nin linear units, and in dBc/Hz:\n\n\\[\n\\mathcal{L}_{\\mathrm{dBc/Hz}}(f_m)=10\\log_{10}\\!\\left[\\frac{1}{2}\\left(\\frac{K_{\\text{push}}}{f_m}\\right)^2 S_{vdd}(f_m)\\right].\n\\]\n\n---\n\n### 5) Important practical note\nFor this **differential LC VCO**, the LDO noise is injected as **common-mode** supply noise. In an ideal symmetric oscillator, common-mode noise is partly rejected, so you should use the actual **supply-pushing/supply-to-phase sensitivity** of the VCO, obtained from simulation or measurement, not the tuning gain \\(K_{VCO}=df/dV_{cont}\\) unless you know the equivalent conversion from supply noise to tuning-voltage noise.\n\n---\n\nIf you want, I can also show how to extract \\(K_{\\text{push}}\\) from simulation and plug in a numeric example.",
        "format": "markdown",
        "sha256": "6512a505aad6f818db57e0c1b724385f2310dcc9865c1473b1a07837af101f69"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The supply-pushing and FM-to-PM derivation is correct, including the 1/offset-frequency-squared dependence. However, the circuit-specific note incorrectly downplays the link between Kpush and KVCO: the golden solution says the supply perturbation acts directly on the varactors, so reducing KVCO also reduces this noise conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2875,
        "output_tokens": 14397,
        "total_tokens": 17272,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13566,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2875,
        "output_tokens": 14397,
        "total_tokens": 17272,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13566,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the LDO noise as a noise voltage on the VCO supply, then pass it through the VCO’s **supply-to-phase** transfer.\n\n### 1) Get the noise at the VCO supply node\nIf \\(S_{th}(f)\\) is already the LDO **output-voltage** noise PSD at \\(V_{out}\\), then\n\\[\nS_{vdd}(f)=S_{th}(f).\n\\]\n\nIf \\(S_{th}\\) is an internal LDO current-noise PSD, first convert it to output-voltage noise:\n\\[\nS_{vdd}(f)=|Z_{out,\\text{LDO}}(f)|^2\\,S_{th}(f).\n\\]\n\nIf there is any supply filtering between LDO and VCO, include it:\n\\[\nS_{vdd}(f)=|H_{sup}(f)|^2 S_{th}(f).\n\\]\n\n---\n\n### 2) Use the VCO supply sensitivity\nDefine the VCO **supply pushing gain**\n\\[\nK_{VDD}=\\frac{\\partial f_0}{\\partial V_{DD}}\\quad [\\text{Hz/V}]\n\\]\nor equivalently\n\\[\nK_{\\omega,VDD}=\\frac{\\partial \\omega_0}{\\partial V_{DD}}=2\\pi K_{VDD}\\quad [\\text{rad/s/V}].\n\\]\n\nA small supply noise \\(v_n(t)\\) causes frequency noise\n\\[\n\\delta f(t)=K_{VDD}\\,v_n(t).\n\\]\n\nSince phase is the integral of frequency,\n\\[\n\\phi_n(t)=2\\pi\\int \\delta f(t)\\,dt.\n\\]\n\nSo the phase-noise PSD is\n\\[\nS_\\phi(f_m)=\\left(\\frac{K_{VDD}}{f_m}\\right)^2 S_{vdd}(f_m),\n\\]\nwhere \\(f_m\\) is the offset from the carrier.\n\nEquivalently,\n\\[\nS_\\phi(f_m)=\\frac{K_{\\omega,VDD}^2}{(2\\pi f_m)^2}S_{vdd}(f_m).\n\\]\n\n---\n\n### 3) Convert to SSB phase noise\nUsing the usual small-noise convention,\n\\[\n\\mathcal L(f_m)\\approx \\frac{1}{2}S_\\phi(f_m)\n\\]\n(up to the usual one-sided/two-sided PSD convention).\n\nThus,\n\\[\n\\boxed{\n\\mathcal L(f_m)\\approx \\frac12\\left(\\frac{K_{VDD}}{f_m}\\right)^2 S_{vdd}(f_m)\n}\n\\]\n\nor, if \\(S_{vdd}=|H_{sup}|^2S_{th}\\),\n\\[\n\\boxed{\n\\mathcal L(f_m)\\approx \\frac12\\left(\\frac{K_{VDD}}{f_m}\\right)^2 |H_{sup}(f_m)|^2 S_{th}(f_m)\n}\n\\]\n\n---\n\n### 4) Practical notes\n- Use **\\(K_{VDD}\\)**, not the tuning gain \\(K_{VCO}=df_0/dV_{cont}\\), unless the noise couples onto \\(V_{cont}\\).\n- Because this is a **differential LC VCO**, ideal common-mode supply noise is largely rejected. So the real answer depends on the actual **supply-to-phase conversion**, which is best obtained from:\n  - **PSS/PNoise** simulation, or\n  - measuring/simulating **frequency pushing** \\(\\Delta f_0/\\Delta V_{DD}\\).\n- If you want total phase noise, add the LDO-induced term to the intrinsic VCO phase noise **in linear units**, not dB.\n\nIf you want, I can also show how to extract \\(K_{VDD}\\) from this specific LC-VCO topology.",
        "format": "markdown",
        "sha256": "15aa12eedc9bed69b269b0021acb553298887711c5bab1e4bd7b51059d8a30ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The core calculation is correct: use supply-pushing sensitivity and convert frequency noise to phase noise with a 1/offset-frequency-squared dependence. However, the circuit-specific claim that common-mode supply noise is largely rejected, and the separation from KVCO, contradict the stated direct coupling to the varactors and miss the KVCO design insight. The measured K_VDD formulation still gives the correct computation.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2875,
        "output_tokens": 16878,
        "total_tokens": 19753,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2875,
        "output_tokens": 16878,
        "total_tokens": 19753,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "You need the **VCO supply-to-phase transfer**, not just \\(S_{th}\\).\n\n### 1) Model the LDO noise at the VCO supply\nLet the LDO output-noise PSD seen by the VCO be\n\n\\[\nS_{vdd}(f)\n\\]\n\nIf \\(S_{th}\\) is already the **voltage-noise PSD at \\(V_{out}\\)**, then simply\n\n\\[\nS_{vdd}(f)=S_{th}(f)\n\\]\n\nIf \\(S_{th}\\) is an internal LDO noise source, first pass it through the LDO/output network:\n\n\\[\nS_{vdd}(f)=|H_{\\text{LDO}\\to\\text{VCO}}(j2\\pi f)|^2\\,S_{th}(f)\n\\]\n\n---\n\n### 2) Convert supply noise to frequency noise\nDefine the VCO **supply pushing** coefficient\n\n\\[\nK_{\\text{push}}=\\frac{\\partial f_{osc}}{\\partial V_{DD}}\\qquad [\\text{Hz/V}]\n\\]\n\nThen the supply noise produces frequency noise\n\n\\[\nS_{\\Delta f}(f)=K_{\\text{push}}^2\\,S_{vdd}(f)\n\\]\n\n---\n\n### 3) Convert frequency noise to phase noise\nSince phase is the integral of frequency,\n\n\\[\nS_{\\phi}(f_{off})=\\frac{S_{\\Delta f}(f_{off})}{f_{off}^2}\n\\]\n\nSo,\n\n\\[\n\\boxed{\nS_{\\phi}(f_{off})\n=\n\\left(\\frac{K_{\\text{push}}}{f_{off}}\\right)^2 S_{vdd}(f_{off})\n}\n\\]\n\nwhere \\(f_{off}\\) is the offset from the carrier.\n\nIf you prefer angular units, with\n\n\\[\nK_\\omega=\\frac{\\partial \\omega_0}{\\partial V_{DD}} \\quad [\\text{rad/s/V}]\n\\]\n\nthen\n\n\\[\n\\boxed{\nS_{\\phi}(f_{off})\n=\n\\left(\\frac{K_\\omega}{2\\pi f_{off}}\\right)^2 S_{vdd}(f_{off})\n}\n\\]\n\n---\n\n### 4) Convert to SSB phase noise\nThe usual single-sideband phase noise is approximately\n\n\\[\n\\boxed{\n\\mathcal{L}(f_{off}) \\approx \\frac{1}{2}S_{\\phi}(f_{off})\n}\n\\]\n\nSo,\n\n\\[\n\\boxed{\n\\mathcal{L}(f_{off})\n\\approx\n\\frac{1}{2}\n\\left(\\frac{K_{\\text{push}}}{f_{off}}\\right)^2\nS_{vdd}(f_{off})\n}\n\\]\n\nin linear units, or in dBc/Hz:\n\n\\[\n\\boxed{\n\\mathcal{L}_{dBc/Hz}(f_{off})\n=\n10\\log_{10}\n\\!\\left[\n\\frac{1}{2}\n\\left(\\frac{K_{\\text{push}}}{f_{off}}\\right)^2\nS_{vdd}(f_{off})\n\\right]\n}\n\\]\n\n---\n\n### Key point\nFrom \\(S_{th}\\) **alone**, you cannot get a numeric phase-noise result. You also need the VCO’s **supply sensitivity** \\(K_{\\text{push}}\\) or, more generally, the transfer function\n\n\\[\nH_{VDD\\to \\phi}(j2\\pi f)\n\\]\n\nso that\n\n\\[\nS_\\phi(f)=|H_{VDD\\to\\phi}(j2\\pi f)|^2\\,S_{vdd}(f)\n\\]\n\n---\n\n### Practical note\nFor a differential LC-VCO like the one shown, supply noise is partly common-mode, so the true conversion can be smaller than a naive estimate. In practice, \\(K_{\\text{push}}\\) is usually obtained by **simulation or measurement** (PSS/Pnoise, HBnoise, or small-signal supply injection).\n\nIf you want, I can also show how to extract \\(K_{\\text{push}}\\) from the circuit or how to do this in SpectreRF/ADS.",
        "format": "markdown",
        "sha256": "dfdfe15a8bc1147632b3f1a5f442b6f737b0379329f9a02027cc2f14725eba5c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly uses supply pushing to convert LDO voltage-noise PSD to frequency noise and then phase noise with the expected 1/f_offset^2 dependence. It omits the circuit-specific insight that the supply perturbation acts directly on the varactors, making Kpush closely related to KVCO, and that reducing KVCO reduces this conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2875,
        "output_tokens": 13817,
        "total_tokens": 16692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12933,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2875,
        "output_tokens": 13817,
        "total_tokens": 16692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12933,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Usually, **the phase noise improves**.\n\n### Why\nIn a differential cross-coupled LC oscillator, the **tail node \\(P\\)** naturally carries a strong **common-mode second-harmonic** component (\\(2f_0\\)).  \nWithout \\(C_T\\), that \\(2f_0\\) swing appears across the tail current source, and the tail source noise gets **modulated/upconverted** into the oscillation, contributing to phase noise.\n\nAdding \\(C_T\\):\n\n- makes the tail node **low impedance at \\(2f_0\\)**,\n- **shunts the second-harmonic current** to ground,\n- reduces the RF voltage swing at the tail source,\n- therefore reduces **tail-noise upconversion** into the differential output.\n\n### Net effect\n- **Close-in phase noise** usually improves the most, especially the part due to **tail-source flicker noise** upconversion.\n- **Far-out phase noise** may improve less, since that is often dominated by the tank loss and the cross-coupled pair's thermal noise.\n\n### Important nuance\n\\(C_T\\) does **not directly filter low-frequency noise** from the tail current source.  \nInstead, it reduces the **mechanism that converts that noise into phase noise**.\n\n### Practical caveat\nIf \\(C_T\\) is poorly chosen, or parasitics create a **common-mode resonance**, the benefit can shrink or even reverse.\n\nSo the short answer is:\n\n> **A properly sized tail capacitor generally lowers the oscillator’s phase noise, especially close-in, by suppressing second-harmonic tail-node swing and reducing tail-noise upconversion.**",
        "format": "markdown",
        "sha256": "9c88e34b56e1a4a81ad0c6b9e84c7cadb454537dead8410eb648d22b6c728579"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that a properly sized CT generally improves phase noise through tail-node filtering, missing the non-monotonic behavior and the class-C, flicker-upconversion, or large-CT instability mechanisms central to the solution.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2943,
        "output_tokens": 11322,
        "total_tokens": 14265,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2943,
        "output_tokens": 11322,
        "total_tokens": 14265,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Usually it **improves** the phase noise, especially **close-in**.\n\nWhy:\n- The tail node \\(P\\) carries a strong **common-mode second-harmonic (\\(2f_0\\))** component.\n- Adding \\(C_T\\) makes \\(P\\) a **low-impedance AC node** at RF, so that common-mode harmonic current returns through \\(C_T\\) instead of through the noisy tail current source \\(I_{SS}\\).\n- This **reduces tail-node voltage swing** and therefore **reduces upconversion of the tail device’s noise**—particularly its **flicker noise**—into phase noise.\n\nSo, in practice:\n- **Close-in phase noise**: usually gets **better** noticeably.\n- **Far-out phase noise**: may improve only a little, because it is often dominated by the tank and cross-coupled pair rather than the tail source.\n\nNuance:\n- If \\(C_T\\) is too small, the benefit is limited.\n- Once the tail-source noise is no longer dominant, making \\(C_T\\) larger gives little extra benefit.\n- Poor sizing can also change waveform/conduction angle, so there is usually an **optimum**.\n\nSo the short answer is: **\\(C_T\\) is generally used as a tail-noise filter, and it typically lowers phase noise, mainly by suppressing tail-noise upconversion.**",
        "format": "markdown",
        "sha256": "9e986636131fb5263309508109f72762a7686078e31f2a66242cfa77f007785f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It vaguely notes an optimum and waveform/conduction-angle effects, but mainly presents CT as a monotonic tail-noise filter. It misses the class-C peak-current improvement and the specific degradation mechanisms that make the effect non-monotonic.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2943,
        "output_tokens": 13357,
        "total_tokens": 16300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13057,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2943,
        "output_tokens": 13357,
        "total_tokens": 16300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13057,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Usually, **the phase noise improves (decreases)**.\n\nWhy:\n- In a differential LC VCO, the **tail node mostly carries common-mode RF**, especially a strong **second-harmonic (\\(2f_0\\))** component.\n- Without \\(C_T\\), that RF/common-mode current flows through the **tail current source**, whose noise is then **upconverted/mixed** into the oscillation.\n- Adding \\(C_T\\) makes the tail node a **low-impedance AC node** for that common-mode signal, so the RF current is shunted through \\(C_T\\) instead of the noisy tail source.\n\nResult:\n- **Less tail-source noise reaches the tank**\n- **Less flicker-noise upconversion**\n- Often a **lower close-in phase noise** and sometimes a lower far-out contribution from the tail source\n\nCaveat:\n- This mainly reduces the **tail-source contribution**. It does **not** remove tank-loss noise or all device noise.\n- If \\(C_T\\) is chosen poorly, it can also disturb beneficial waveform shaping, so the improvement is **not unlimited**.\n\nSo the short answer is: **adding \\(C_T\\) generally lowers the oscillator’s phase noise by filtering/isolation of the tail current source noise.**",
        "format": "markdown",
        "sha256": "a2ab4b51e813dfbd4a2aac5e3aae5d82bbedbde5060be433645a053aebc25950"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that adding CT generally improves phase noise through tail-noise filtering. Its generic caveat about waveform shaping does not capture the nonmonotonic effect or a specific degradation mechanism required for higher credit.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2943,
        "output_tokens": 11147,
        "total_tokens": 14090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2943,
        "output_tokens": 11147,
        "total_tokens": 14090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is essentially a **coupled LC oscillator / QVCO**.  \nSo the **first-order estimate** of its oscillation frequency is just the tank resonance:\n\n\\[\nf_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{L\\,C_{\\text{eq}}}}\n\\]\n\nwhere \\(C_{\\text{eq}}\\) is the **total capacitance at each resonant node** \\((X_1,Y_1,X_2,Y_2)\\): explicit tank capacitors if present, plus MOS parasitics/varactors/wiring.\n\nA few notes:\n\n- The cross-coupled transistors and current sources \\(I_{SS}\\), \\(I_1\\) mainly provide **negative resistance** and **coupling**.\n- They do **not** set the nominal oscillation frequency; the **LC tank does**.\n- The inter-core coupling can pull the frequency a little above or below the bare tank resonance, but as an estimate it remains **close to** \\(1/(2\\pi\\sqrt{LC_{\\text{eq}}})\\).\n\nSo, from the figure alone, the best estimate is:\n\n\\[\n\\boxed{f_{\\text{osc}} \\sim \\frac{1}{2\\pi\\sqrt{L\\,C_{\\text{eq}}}}}\n\\]\n\nIf you want, I can also derive the **coupling-induced frequency shift** for this QVCO topology.",
        "format": "markdown",
        "sha256": "e5027070e3b57168dc9a17d485b159d16dcadf267bb1827abcbc0d041c44ab9f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the tank resonance and notes that coupling can shift the frequency, but gives no estimate of the shift or its dependence on coupling and Q. That is a key part of the expected oscillation-frequency estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 25086,
        "total_tokens": 26887,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24782,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 25086,
        "total_tokens": 26887,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24782,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is essentially a **quadrature LC oscillator** made from two identical cross-coupled LC cores. So the oscillation frequency is, to first order, the **tank resonance**:\n\n\\[\nf_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{L_{\\text{tank}}\\,C_{\\text{tank}}}}\n\\]\n\nwhere \\(L_{\\text{tank}}\\) and \\(C_{\\text{tank}}\\) are the **effective resonant inductance and capacitance** of each core.\n\nA key point: **no explicit capacitors are shown**, so \\(C_{\\text{tank}}\\) must come from the omitted tank caps/varactors and transistor/interconnect parasitics.  \nSo from the figure alone, you **cannot get a numeric frequency**.\n\nFor this **parallel-coupled QVCO** topology, the coupling transistors add a small reactive load, so the actual oscillation frequency is usually **slightly lower** than the uncoupled tank resonance \\(f_0\\):\n\n\\[\nf_{\\text{osc}} \\approx f_0\\left(1-\\frac{k}{2Q}\\right),\n\\qquad\nk \\approx \\frac{I_1}{I_{SS}}\n\\]\n\nfor weak coupling, where \\(Q\\) is the tank quality factor.\n\nSo the best estimate is:\n\n\\[\n\\boxed{f_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{L_{\\text{tank}}C_{\\text{tank}}}}}\n\\]\n\nand in practice it is **a little below** that value because of the quadrature coupling.",
        "format": "markdown",
        "sha256": "6ac321619773d6587007a99569cf8aea6d3d2ed3ac85467a25eeb75e75f00aeb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gives the tank resonance and the correct coupling-shift magnitude, but incorrectly asserts that coupling usually shifts the frequency below resonance; the oscillator can settle above or below it.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 17955,
        "total_tokens": 19756,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 17955,
        "total_tokens": 19756,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a coupled differential **LC oscillator** (quadrature type), so to first order its oscillation frequency is just the **tank resonance**:\n\n\\[\n\\omega_{osc} \\approx \\frac{1}{\\sqrt{L\\,C_{\\text{eq}}}}\n\\qquad\\Rightarrow\\qquad\nf_{osc} \\approx \\frac{1}{2\\pi\\sqrt{L\\,C_{\\text{eq}}}}\n\\]\n\nwhere:\n\n- \\(L\\) = the inductor value of one tank branch  \n- \\(C_{\\text{eq}}\\) = total capacitance seen at the resonant node(s), including any tuning capacitance plus MOS/parasitic capacitances\n\nSo the best estimate from the figure alone is:\n\n\\[\n\\boxed{f_{osc}\\approx \\frac{1}{2\\pi\\sqrt{L\\,C_{\\text{eq}}}}}\n\\]\n\nThe extra coupled transistors mainly enforce quadrature and slightly pull the frequency, but the main setting is still the LC tank.\n\nIf you want a **numerical** frequency, I’d need the values of \\(L\\) and \\(C_{\\text{eq}}\\).",
        "format": "markdown",
        "sha256": "b6909c818f36320360d8c0d725214bdd85497e1beabf809f909a089e01ac0387"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the LC tank resonance and notes qualitative frequency pulling, but omits the essential coupling-induced shift, approximately ±αω₀/(2Q), so it does not give the requested coupled-oscillator estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 14232,
        "total_tokens": 16033,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 14232,
        "total_tokens": 16033,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
