{
  "model_key": "gpt_55",
  "display_name": "GPT-5.5",
  "provider": "openai",
  "evaluation_model_ids": [],
  "thinking_effort": "xhigh",
  "configuration_note": "GPT-5.5 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (openai/gpt-5.5) at reasoning effort xhigh, the highest it offers. Requests set max_tokens to 128,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for GPT-5.5 on 2026-11-10 ($5.00 input, $0.50 cached input, $30.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 108,
          "incorrect_count": 42,
          "partial_credit_count": 36,
          "zero_count": 6,
          "mean_score_0_to_4": 3.46,
          "score_percent": 86.5,
          "score_distribution": {
            "0": 6,
            "1": 7,
            "2": 7,
            "3": 22,
            "4": 108
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 108,
          "incorrect_count": 42,
          "partial_credit_count": 36,
          "zero_count": 6,
          "mean_score_0_to_4": 3.46,
          "score_percent": 86.5,
          "score_distribution": {
            "0": 6,
            "1": 7,
            "2": 7,
            "3": 22,
            "4": 108
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 77,
          "incorrect_count": 13,
          "partial_credit_count": 7,
          "zero_count": 6,
          "mean_score_0_to_4": 3.6555555555555554,
          "score_percent": 91.38888888888889,
          "score_distribution": {
            "0": 6,
            "3": 7,
            "4": 77
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 77,
          "incorrect_count": 13,
          "partial_credit_count": 7,
          "zero_count": 6,
          "mean_score_0_to_4": 3.6555555555555554,
          "score_percent": 91.38888888888889,
          "score_distribution": {
            "0": 6,
            "3": 7,
            "4": 77
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 31,
          "incorrect_count": 29,
          "partial_credit_count": 29,
          "zero_count": 0,
          "mean_score_0_to_4": 3.1666666666666665,
          "score_percent": 79.16666666666666,
          "score_distribution": {
            "1": 7,
            "2": 7,
            "3": 15,
            "4": 31
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 31,
          "incorrect_count": 29,
          "partial_credit_count": 29,
          "zero_count": 0,
          "mean_score_0_to_4": 3.1666666666666665,
          "score_percent": 79.16666666666666,
          "score_distribution": {
            "1": 7,
            "2": 7,
            "3": 15,
            "4": 31
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 36,
        "incorrect_count": 14,
        "partial_credit_count": 12,
        "zero_count": 2,
        "mean_score_0_to_4": 3.48,
        "score_percent": 87.0,
        "score_distribution": {
          "0": 2,
          "1": 2,
          "2": 2,
          "3": 8,
          "4": 36
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 37,
        "incorrect_count": 13,
        "partial_credit_count": 11,
        "zero_count": 2,
        "mean_score_0_to_4": 3.5,
        "score_percent": 87.5,
        "score_distribution": {
          "0": 2,
          "1": 1,
          "2": 4,
          "3": 6,
          "4": 37
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 35,
        "incorrect_count": 15,
        "partial_credit_count": 13,
        "zero_count": 2,
        "mean_score_0_to_4": 3.4,
        "score_percent": 85.0,
        "score_distribution": {
          "0": 2,
          "1": 4,
          "2": 1,
          "3": 8,
          "4": 35
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 62720,
        "input_tokens": 272871,
        "output_tokens": 1248219,
        "total_tokens": 1521090
      },
      "known_totals": {
        "cached_input_tokens": 62720,
        "input_tokens": 272871,
        "output_tokens": 1248219,
        "total_tokens": 1521090
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 26,
          "incorrect_count": 4,
          "partial_credit_count": 2,
          "zero_count": 2,
          "mean_score_0_to_4": 3.6666666666666665,
          "score_percent": 91.66666666666666,
          "score_distribution": {
            "0": 2,
            "3": 2,
            "4": 26
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 26,
          "incorrect_count": 4,
          "partial_credit_count": 2,
          "zero_count": 2,
          "mean_score_0_to_4": 3.6666666666666665,
          "score_percent": 91.66666666666666,
          "score_distribution": {
            "0": 2,
            "3": 2,
            "4": 26
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 25,
          "incorrect_count": 5,
          "partial_credit_count": 3,
          "zero_count": 2,
          "mean_score_0_to_4": 3.6333333333333333,
          "score_percent": 90.83333333333333,
          "score_distribution": {
            "0": 2,
            "3": 3,
            "4": 25
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 10,
          "incorrect_count": 10,
          "partial_credit_count": 10,
          "zero_count": 0,
          "mean_score_0_to_4": 3.2,
          "score_percent": 80.0,
          "score_distribution": {
            "1": 2,
            "2": 2,
            "3": 6,
            "4": 10
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 11,
          "incorrect_count": 9,
          "partial_credit_count": 9,
          "zero_count": 0,
          "mean_score_0_to_4": 3.25,
          "score_percent": 81.25,
          "score_distribution": {
            "1": 1,
            "2": 4,
            "3": 4,
            "4": 11
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 10,
          "incorrect_count": 10,
          "partial_credit_count": 10,
          "zero_count": 0,
          "mean_score_0_to_4": 3.05,
          "score_percent": 76.25,
          "score_distribution": {
            "1": 4,
            "2": 1,
            "3": 5,
            "4": 10
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The MOSFET intrinsic gain is\n\n\\[\nA_{int}=g_m r_o=\\frac{g_m}{g_{ds}}\n\\]\n\nIf you **double both length \\(L\\)** and **width \\(W\\)**, then \\(W/L\\) stays the same.\n\nAssuming the same bias/inversion level:\n\n- \\(g_m\\) stays approximately the same, since \\(W/L\\) is unchanged.\n- \\(r_o\\) increases because channel-length modulation is reduced; roughly \\(\\lambda \\propto 1/L\\), so doubling \\(L\\) roughly doubles \\(r_o\\).\n\nTherefore:\n\n\\[\nA_{int}=g_m r_o\n\\]\n\napproximately **doubles**.\n\nSo, to first order: **doubling both \\(W\\) and \\(L\\) doubles the intrinsic gain**, mainly because the longer channel increases output resistance. Short-channel effects may make the improvement less ideal in modern processes.",
        "format": "markdown",
        "sha256": "c762f072351d53273e9de95c3da56d0504621aa7c79e895a6ad81077db585a37"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling both dimensions leaves gm approximately unchanged while the longer channel roughly doubles ro, so intrinsic gain approximately doubles under the stated bias assumption.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1730,
        "total_tokens": 1756,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1531,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1730,
        "total_tokens": 1756,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1531,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The MOSFET intrinsic gain is:\n\n\\[\nA_i = g_m r_o = \\frac{g_m}{g_{ds}}\n\\]\n\nIf you **double both length \\(L\\)** and **width \\(W\\)**, then \\(W/L\\) stays the same.\n\nAssuming the same bias condition/overdrive:\n\n- \\(g_m\\) stays roughly the same, because \\(W/L\\) is unchanged.\n- \\(r_o\\) increases because longer channel length reduces channel-length modulation; approximately \\(r_o \\propto L\\).\n\nSo the intrinsic gain approximately **doubles**:\n\n\\[\nA_i \\approx 2 \\times A_i\n\\]\n\nIn practice, due to short-channel effects and process nonidealities, it may not be exactly 2×, but the expected trend is that intrinsic gain increases roughly in proportion to channel length.",
        "format": "markdown",
        "sha256": "42e675e6f44b1a26066e9a568701c048122ea5fae0853f6bfa38f8a6cbd25c80"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling both dimensions leaves W/L and, at fixed overdrive, gm approximately unchanged, while ro rises roughly with channel length, so intrinsic gain approximately doubles.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 700,
        "total_tokens": 726,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 700,
        "total_tokens": 726,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Approximately, the MOSFET intrinsic gain **doubles**.\n\nIntrinsic gain is\n\n\\[\nA_i = g_m r_o = \\frac{g_m}{g_{ds}}\n\\]\n\nIf both **length \\(L\\)** and **width \\(W\\)** are doubled:\n\n- \\(W/L\\) stays the same, so for the same bias/inversion level, \\(g_m\\) is roughly unchanged.\n- Increasing \\(L\\) reduces channel-length modulation, so \\(r_o\\) increases roughly proportional to \\(L\\).\n\nThus:\n\n\\[\nA_i \\propto L\n\\]\n\nSo doubling \\(L\\) gives roughly:\n\n\\[\nA_i' \\approx 2A_i\n\\]\n\nThat is about a **2× increase**, or **+6 dB**.\n\nCaveat: this is the ideal/first-order analog design result. In short-channel CMOS, the exact improvement may be less due to velocity saturation, DIBL, and other nonideal effects.",
        "format": "markdown",
        "sha256": "68de90fc4af57a9b4852d9bca84d040a7c2d8c88423d46f480e8df987ce42e80"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling both dimensions leaves gm approximately unchanged while the longer channel increases ro, so intrinsic gain roughly doubles. The caveat is consistent with the first-order result.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1762,
        "total_tokens": 1788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1762,
        "total_tokens": 1788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be correct — it depends on what is being held constant.\n\nFor a long-channel MOSFET in saturation:\n\n\\[\nI_D=\\frac{1}{2}k\\frac WL V_{OV}^2\n\\]\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}=k\\frac WL V_{OV}\n\\]\n\nSo for the same transistor, with fixed \\(W/L\\), increasing overdrive voltage \\(V_{OV}=V_{GS}-V_T\\) increases \\(g_m\\).  \nSo Student A is correct in that context.\n\nBut the same expression can also be written as:\n\n\\[\ng_m=\\frac{2I_D}{V_{OV}}\n\\]\n\nSo if the drain current \\(I_D\\) is held constant, increasing \\(V_{OV}\\) makes \\(g_m\\) decrease.  \nSo Student B is correct in that context.\n\nTherefore: both are correct, depending on the constraint. For fixed device size, \\(g_m\\) increases with \\(V_{OV}\\); for fixed bias current, \\(g_m\\) decreases with \\(V_{OV}\\).",
        "format": "markdown",
        "sha256": "265f02ce10325f72617e974c9eb2778322dcd8ec9608e68f4c50e9e7a1a3a59a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that for a fixed transistor (fixed W/L), increasing overdrive increases gm, while at fixed drain current it decreases; this matches the golden solution.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1275,
        "total_tokens": 1313,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1275,
        "total_tokens": 1313,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be correct — it depends on what is being held constant.\n\nFor a long-channel MOSFET in saturation:\n\n\\[\nI_D=\\frac{1}{2}k(V_{OV})^2\n\\]\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}=kV_{OV}\n\\]\n\nSo for a **fixed MOSFET geometry and process**, increasing overdrive voltage\n\n\\[\nV_{OV}=V_{GS}-V_T\n\\]\n\nmakes \\(g_m\\) increase. In that sense, **Student A is correct**.\n\nBut since\n\n\\[\ng_m=\\frac{2I_D}{V_{OV}}\n\\]\n\nif you compare devices or bias points at **fixed drain current \\(I_D\\)**, then increasing \\(V_{OV}\\) makes \\(g_m\\) decrease. In that sense, **Student B is correct**.\n\nSo the answer is:\n\n> For the same transistor with increasing \\(V_{GS}\\), \\(g_m\\) goes up.  \n> At fixed bias current, larger overdrive gives lower \\(g_m\\).  \n\nThe apparent contradiction comes from changing what is assumed constant.",
        "format": "markdown",
        "sha256": "0594a829758a0988f039921e03398af481a0d78127ece192c22069e815d55919"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for fixed transistor geometry, derives that gm increases with VOV, and explains Student B’s result applies when ID is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 763,
        "total_tokens": 801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 763,
        "total_tokens": 801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be correct — it depends on what is being held constant.\n\nFor a long-channel MOSFET in saturation,\n\n\\[\nI_D=\\frac{1}{2}\\beta V_{OV}^2\n\\]\n\nso\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}=\\beta V_{OV}\n\\]\n\nwhere \\(V_{OV}=V_{GS}-V_T\\) and \\(\\beta=\\mu C_{ox}W/L\\).\n\n- **If the same MOSFET is used and \\(V_{OV}\\) is increased by raising \\(V_{GS}\\):**\n\n\\[\ng_m=\\beta V_{OV}\n\\]\n\nso \\(g_m\\) **increases**. Student A is correct.\n\n- **If the drain current \\(I_D\\) is held constant:**\n\n\\[\ng_m=\\frac{2I_D}{V_{OV}}\n\\]\n\nso increasing \\(V_{OV}\\) makes \\(g_m\\) **decrease**. Student B is correct.\n\nSo the answer is: **both are correct, but under different assumptions.** For a fixed device, \\(g_m\\) increases with overdrive; for fixed bias current, \\(g_m\\) decreases with overdrive.",
        "format": "markdown",
        "sha256": "ff047a987c8cab6e157c83ee0d862e81de726b4c0147f39ac99fee92d29e5be5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed-size transistor and explains that Student B's result applies only when drain current is held constant.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1817,
        "total_tokens": 1855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1817,
        "total_tokens": 1855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not exactly **identical**, but it is the **same form/topology with reversed polarities and current directions**.\n\nFor both NMOS and PMOS small-signal models you typically have:\n\n- Gate open-circuit, ideally infinite input resistance\n- A transconductance source, with value involving \\(g_m\\)\n- An output resistance \\(r_o\\) between drain and source\n- Optionally a body-effect source involving \\(g_{mb}\\)\n- Parasitic capacitances in high-frequency models\n\nThe key difference is the sign convention:\n\n### NMOS\nUsually modeled with current flowing from drain to source:\n\n\\[\ni_d = g_m v_{gs} + g_{ds}v_{ds}\n\\]\n\nThe controlled current source points from drain to source and is controlled by \\(v_{gs}\\).\n\n### PMOS\nA PMOS naturally conducts from source to drain, so we often use:\n\n\\[\ni_s = g_m v_{sg} + g_{ds}v_{sd}\n\\]\n\nThe controlled current source direction is opposite that of the NMOS model, and the controlling voltage is usually \\(v_{sg}\\) instead of \\(v_{gs}\\).\n\nEquivalently, if you insist on using the same NMOS current/voltage definitions, the PMOS \\(g_m\\) contribution has the opposite sign.\n\nSo the answer is:\n\n> The PMOS small-signal model has the same structure as the NMOS model, but the voltage polarities and controlled-source current direction are reversed. Parameter values such as \\(g_m\\), \\(r_o\\), threshold voltage, and mobility may also differ.",
        "format": "markdown",
        "sha256": "d9ec0d14b220cb1f72cb5b6d5571f970c46c5cda928123718943c7337df32222"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model, with reversed polarities and current directions.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1374,
        "total_tokens": 1400,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1374,
        "total_tokens": 1400,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Essentially **yes in form**, but **not identical in polarity/sign conventions**.\n\nFor an NMOS in saturation, using drain-to-source current:\n\n\\[\ni_d = g_m v_{gs} + g_o v_{ds}\n\\]\n\nFor a PMOS, if you use the natural PMOS variables \\(v_{sg}\\), \\(v_{sd}\\), and source-to-drain current:\n\n\\[\ni_{sd} = g_m v_{sg} + g_o v_{sd}\n\\]\n\nSo the PMOS small-signal model has the same elements: \\(g_m\\), \\(r_o\\), body effect if included, and capacitances. But the controlled current source direction and voltage polarities are reversed relative to the usual NMOS drawing.\n\nIn short:\n\n- **Same topology/model structure**\n- **Opposite voltage/current reference directions**\n- **Different parameter values** in practice, e.g. PMOS usually has lower mobility, so for the same size and bias it often has lower \\(g_m\\)\n\nSo a PMOS small-signal model is the NMOS model with the appropriate sign/polarity changes.",
        "format": "markdown",
        "sha256": "1274c097d66ffe67c88679d0f5bd6aa17207a0395f0ae7dfe0f1b9a73f726a27"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS model has the same form as the NMOS model, with appropriate polarity and sign-convention changes.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 4380,
        "total_tokens": 4406,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 4380,
        "total_tokens": 4406,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not **literally identical**, but it is **the same form/topology** as the NMOS small-signal model.\n\nFor both NMOS and PMOS, the low-frequency small-signal model has:\n\n- open-circuit gate,\n- \\(r_o\\) between drain and source,\n- a dependent current source proportional to gate-source signal,\n- optionally a body-effect source \\(g_{mb}v_{bs}\\).\n\nThe main differences are **polarity and current direction conventions**.\n\nFor an NMOS, we often write:\n\n\\[\ni_d = g_m v_{gs} + g_{ds}v_{ds}\n\\]\n\nwith the controlled current source directed from drain to source.\n\nFor a PMOS, if you use PMOS-natural variables,\n\n\\[\nv_{sg},\\quad v_{sd}\n\\]\n\nthen positive \\(v_{sg}\\) increases current from source to drain, so the dependent source is usually drawn in the opposite direction.\n\nEquivalently, if you keep the same terminal current/voltage conventions as NMOS, the equations can look the same, but the DC bias currents and voltage polarities are opposite.\n\nSo:\n\n> The PMOS small-signal model is structurally the same as the NMOS model, but the voltage polarities and current-source direction are reversed depending on convention. Its parameter values, such as \\(g_m\\), \\(r_o\\), and capacitances, may also differ.",
        "format": "markdown",
        "sha256": "bbab04885da1c12d43c2bab1a1f18d6b021fd35e91fd17ab6e1b777a5d60446e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS model has the same form as the NMOS model, with polarity and current-direction conventions reversed. This satisfies the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2887,
        "total_tokens": 2913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2887,
        "total_tokens": 2913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the diode-connected NMOS,\n\n\\[\nV_{GS}=V_{DS}=V_X\n\\]\n\nso \\(M_1\\) is off until \\(V_X\\) reaches the NMOS threshold voltage \\(V_{TN}\\). When it turns on, it is always in saturation because\n\n\\[\nV_{DS}=V_{GS}\\ge V_{GS}-V_{TN}.\n\\]\n\nThus, neglecting channel-length modulation and leakage,\n\n\\[\nI_X =\n\\begin{cases}\n0, & V_X < V_{TN} \\\\[6pt]\n\\dfrac{1}{2}k_n\\left(V_X - V_{TN}\\right)^2, & V_X \\ge V_{TN}\n\\end{cases}\n\\]\n\nwhere \\(k_n=\\mu_n C_{ox}\\dfrac{W}{L}\\).\n\nSo the sketch is zero current up to \\(V_{TN}\\), then a rising quadratic curve:\n\n```\n I_X\n  ^\n  |                         .\n  |                      .\n  |                   .\n  |                .\n  |             .\n  |___________.________________> V_X\n            V_TN\n```\n\nIf body-diode effects are included, there would also be negative current for sufficiently negative \\(V_X\\), around \\(V_X \\lesssim -0.7\\text{ V}\\).",
        "format": "markdown",
        "sha256": "7a891046704441859aae50b26ea91cd1e8d732b7e03a636e7a43f594d4c1a492"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its off region below threshold, and its quadratic saturation current above threshold. The negative-voltage body-diode note is also consistent with the solution.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 2353,
        "total_tokens": 3559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 2353,
        "total_tokens": 3559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **diode-connected NMOS**: gate and drain are tied to \\(V_X\\), source is grounded.\n\nSo\n\n\\[\nV_{GS}=V_{DS}=V_X\n\\]\n\nFor an ideal long-channel NMOS ignoring subthreshold and body diode current:\n\n\\[\nI_X =\n\\begin{cases}\n0, & V_X < V_{TN} \\\\\n\\dfrac{1}{2}\\mu_n C_{ox}\\dfrac{W}{L}\\left(V_X - V_{TN}\\right)^2, & V_X \\ge V_{TN}\n\\end{cases}\n\\]\n\nSince \\(V_{DS}=V_{GS}\\), whenever the transistor is on it is in saturation because\n\n\\[\nV_{DS} \\ge V_{GS}-V_{TN}\n\\]\n\nThus the sketch is zero until \\(V_X=V_{TN}\\), then rises quadratically:\n\n```\nI_X\n ^\n |                         /\n |                      .´\n |                   .´\n |                .´\n |             .´\n |          .´\n |________.____________________> V_X\n        V_TN\n```\n\nIf the body diode is included, then for sufficiently negative \\(V_X\\), around \\(V_X \\lesssim -0.7\\text{ V}\\), a negative current would flow due to the forward-biased drain/body diode. Otherwise, the ideal MOS curve is as shown above.",
        "format": "markdown",
        "sha256": "01a95556ebfa4df74d770b5277897c346b11c20e0dad154f6162de33f77c8c09"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives approximately zero current below threshold and a quadratic rise above threshold, with the correct saturation reasoning. The negative-voltage body-diode note is optional and does not detract.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 3409,
        "total_tokens": 4615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 3409,
        "total_tokens": 4615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the diode-connected NMOS,\n\n\\[\nV_G=V_D=V_X,\\qquad V_S=0\n\\]\n\nso\n\n\\[\nV_{GS}=V_{DS}=V_X .\n\\]\n\nFor \\(V_X<V_{TN}\\), the NMOS is off, so ideally\n\n\\[\nI_X \\approx 0 .\n\\]\n\nFor \\(V_X\\ge V_{TN}\\), the device turns on. Since\n\n\\[\nV_{DS}=V_{GS} \\ge V_{GS}-V_{TN},\n\\]\n\nthe MOSFET is always in saturation, so\n\n\\[\nI_X = \\frac{1}{2}k_n\\frac{W}{L}\\left(V_X-V_{TN}\\right)^2\n\\]\n\nneglecting channel-length modulation.\n\nSo the sketch is a quadratic curve starting at \\(V_X=V_{TN}\\):\n\n\\[\n\\begin{array}{c}\nI_X \\\\\n\\uparrow \\\\\n| \\qquad\\qquad\\quad \\text{parabolic rise} \\\\\n| \\qquad\\qquad . \\\\\n| \\qquad . \\\\\n| \\quad . \\\\\n|__.________________\\rightarrow V_X \\\\\n\\quad V_{TN}\n\\end{array}\n\\]\n\nIdeally, \\(I_X=0\\) for \\(V_X<V_{TN}\\). If body-diode effects are included, there would also be a negative-current branch for sufficiently negative \\(V_X\\), around \\(V_X\\lesssim -0.7\\text{ V}\\).",
        "format": "markdown",
        "sha256": "82fe0fa085719d4516456af1c8ef8cc27cb8097f9d8165f811f3cbd81892e134"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, near-zero current below threshold, and quadratic saturation-current rise above threshold. The optional negative-voltage body-diode note does not detract.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 3436,
        "total_tokens": 4642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 3436,
        "total_tokens": 4642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an NMOS and neglecting channel-length modulation/subthreshold current:\n\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\text{ V}\n\\]\n\nSo \\(I_X\\) is essentially the NMOS drain current.\n\nLet \\(V_T\\) be the NMOS threshold voltage and \\(k_n=\\mu_n C_{ox}\\frac WL\\). Then\n\n\\[\nI_X =\n\\begin{cases}\n0, & V_X \\le V_T \\\\[6pt]\n\\dfrac{k_n}{2}(V_X-V_T)^2, & V_T < V_X < V_T+1 \\\\[8pt]\nk_n\\left[(V_X-V_T)(1)-\\dfrac{1^2}{2}\\right], & V_X \\ge V_T+1\n\\end{cases}\n\\]\n\nSo the sketch is:\n\n- \\(I_X=0\\) until \\(V_X=V_T\\)\n- then \\(I_X\\) rises quadratically while the MOSFET is in saturation\n- after \\(V_X=V_T+1\\), the MOSFET enters triode and \\(I_X\\) rises approximately linearly with \\(V_X\\)\n\n```\nI_X\n ^\n |                         /\n |                       /\n |                     /\n |                  .'\n |               .'\n |            .'\n |__________.________________> V_X\n          V_T       V_T+1\n```\n\nIf \\(V_X\\) is only swept from \\(0\\) to \\(1\\text{ V}\\), then the device remains in cutoff/saturation only, so the curve is just zero up to \\(V_T\\), then quadratic.",
        "format": "markdown",
        "sha256": "ffcc852e068d1581a49a915a1f6e9a6d2fe6f320f0bff1078335f6aa3ecdf476"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions and gives the corresponding quadratic-then-roughly-linear current trend with the correct transition at V_X = V_T + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 3466,
        "total_tokens": 4835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 3466,
        "total_tokens": 4835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the nMOS, the source is grounded and the drain is fixed at \\(1\\text{ V}\\), so\n\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\text{ V}\n\\]\n\nand the indicated current \\(I_X\\) is the drain current.\n\nIgnoring channel-length modulation and subthreshold current, with \\(\\beta_n=\\mu_n C_{ox}(W/L)\\):\n\n\\[\nI_X =\n\\begin{cases}\n0, & V_X \\le V_{TN} \\\\[4pt]\n\\dfrac{1}{2}\\beta_n\\left(V_X-V_{TN}\\right)^2, \n& V_{TN}<V_X<V_{TN}+1 \\\\[6pt]\n\\beta_n\\left[\\left(V_X-V_{TN}\\right)-\\dfrac{1}{2}\\right],\n& V_X\\ge V_{TN}+1\n\\end{cases}\n\\]\n\nSo the sketch is:\n\n```text\nI_X\n ^\n |                              /   triode: linear in V_X\n |                            /\n |                         .-'\n |                      .-'\n |                  _.-'     saturation: square-law\n |              _.-'\n |__________.-'________________________________> V_X\n          V_TN          V_TN + 1 V\n     cutoff\n```\n\nThus \\(I_X=0\\) until \\(V_X\\) reaches the threshold voltage, then rises quadratically, and for \\(V_X>V_{TN}+1\\text{ V}\\) becomes approximately linear because \\(V_{DS}=1\\text{ V}\\) is fixed.",
        "format": "markdown",
        "sha256": "c499df7718de4d0823cdd0e034cb41c1819123b8c3bf6b452cdc9f394aefdf94"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, the quadratic saturation region up to V_X = V_TN + 1 V, and the roughly linear triode-region rise beyond it. The piecewise current expressions are consistent with the fixed 1 V drain voltage.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 5520,
        "total_tokens": 6889,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 5520,
        "total_tokens": 6889,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an NMOS with source/body at ground and ignoring channel-length modulation:\n\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\text{ V}\n\\]\n\nSo \\(I_X\\) is the NMOS drain current.\n\nLet \\(\\beta_n=\\mu_n C_{ox}\\frac WL\\) and \\(V_T=V_{TN}\\). Then\n\n\\[\nI_X =\n\\begin{cases}\n0, & V_X < V_T \\\\[6pt]\n\\dfrac{1}{2}\\beta_n (V_X-V_T)^2, & V_T \\le V_X \\le V_T+1 \\\\[8pt]\n\\beta_n\\left[(V_X-V_T)(1)-\\dfrac{1^2}{2}\\right], & V_X \\ge V_T+1\n\\end{cases}\n\\]\n\nor\n\n\\[\nI_X=\\beta_n\\left(V_X-V_T-\\frac12\\right)\n\\]\n\nfor \\(V_X\\ge V_T+1\\).\n\nSketch:\n\n```\nI_X\n ^\n |                         linear region\n |                       /\n |                     /\n |                   /\n |              ____/\n |          ___/   saturation-region parabola\n |      ___/\n |_____/________________________________> V_X\n      V_T        V_T + 1 V\n```\n\nThus \\(I_X\\) is approximately zero until \\(V_X=V_T\\), then rises quadratically while the NMOS is in saturation, and becomes approximately linear once \\(V_X>V_T+1\\text{ V}\\).",
        "format": "markdown",
        "sha256": "dd39d36de2421f47992d01e5e10077f01a6c7963e68c94eb243b8773f52165b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives the quadratic saturation-region rise from V_T to V_T+1 V and the roughly linear triode-region rise beyond, with the appropriate current expressions.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 2408,
        "total_tokens": 3777,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 2408,
        "total_tokens": 3777,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not as a useful **current source**, assuming it is a normal enhancement-mode MOSFET.\n\nAs drawn, the gate and one terminal are grounded. If this is a PMOS with source at the top and drain/gate at ground, then when the top node voltage \\(V_X\\) rises above \\(|V_T|\\), it turns on and is in saturation, but its current is still set by \\(V_X\\):\n\n\\[\nI_X \\approx \\frac{1}{2}k_p\\frac{W}{L}(V_X-|V_{TP}|)^2\n\\]\n\nSo the current changes strongly with the voltage at the top node. That is diode-connected-MOS behavior, not current-source behavior. A current source should provide nearly constant current over a range of terminal voltages, i.e. have high output resistance.\n\nIf instead it is an NMOS with gate and source both grounded, then \\(V_{GS}=0\\), so an enhancement NMOS is simply off except for leakage.\n\nOnly a depletion-mode FET/JFET with gate tied to source could act somewhat like a current regulator at \\(V_{GS}=0\\). But a normal MOSFET connected as shown is not a proper current source.",
        "format": "markdown",
        "sha256": "0892ba68c7bdc822aac4c50dc011f680554cf2a53feacd1ea1628bad842a6ee9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes the diode-connected PMOS is not a useful current source and explains that its current depends on VX. It does not explicitly identify its low small-signal impedance (about 1/gm), as required for full credit, and adds unnecessary alternative-device speculation.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 5954,
        "total_tokens": 6454,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 5954,
        "total_tokens": 6454,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No — not as a useful/current-regulating current source.\n\nIn the shown connection, the MOSFET has its gate and one terminal tied to ground, and the current \\(I_X\\) is applied at the other terminal. For the likely pMOS interpretation, the device is effectively diode-connected because the gate and drain are both at ground. If the top node voltage is \\(V_X\\),\n\n\\[\nV_{SG}=V_X,\\qquad V_{SD}=V_X\n\\]\n\nso the current is approximately\n\n\\[\nI_X \\approx \\frac{1}{2}k_p\\left(V_X-|V_{TP}|\\right)^2\n\\]\n\nfor \\(V_X>|V_{TP}|\\).\n\nThat means the current depends strongly on the voltage \\(V_X\\). A current source should provide nearly constant current over a range of output voltages, i.e. it should have high output resistance. This diode-connected MOSFET has relatively low small-signal resistance, roughly\n\n\\[\nr \\approx \\frac{1}{g_m}\n\\]\n\nso it behaves more like a nonlinear resistor/diode than a current source.\n\nIt can be used to generate a bias voltage for a current mirror, but by itself it does not act as a good current source.",
        "format": "markdown",
        "sha256": "91169fb5206d9b9ae5f958398267bcf80853c11837de77cdaecc143f1635f771"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the intended diode-connected PMOS topology, concludes it is not a current source, and explains its low output resistance of about 1/gm.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 4928,
        "total_tokens": 5428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 4928,
        "total_tokens": 5428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not as a useful current source, as shown.\n\nA MOSFET behaves like a current source only when its gate-source voltage is biased to a fixed value and the device is kept in saturation. Then the drain current is approximately independent of drain voltage.\n\nIn the shown connection:\n\n- If this is an enhancement NMOS with gate and source grounded, then  \n  \\[\n  V_{GS}=0\n  \\]\n  so the transistor is off, except for leakage. It cannot provide a defined current source.\n\n- If it is intended as a PMOS with gate and drain grounded and current entering the source, then it is essentially a diode-connected MOSFET. It will conduct for \\(V_{SG}>|V_T|\\), but the current is\n  \\[\n  I_X \\approx \\frac{1}{2}k_p(V_{SG}-|V_T|)^2\n  \\]\n  so the current depends strongly on the terminal voltage. That is not current-source behavior.\n\nSo, as drawn, it does not act as a proper current source. It would need an appropriate bias voltage and enough compliance voltage to remain in saturation.",
        "format": "markdown",
        "sha256": "923a668e92b813c873d54d4020b0aea11d29361b6e6531c57be8c3950798414e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The main conclusion is correct, and the PMOS diode-connected case and its voltage-dependent current are explained. It does not state the key low-impedance (about 1/gm) reason, and it unnecessarily entertains an NMOS interpretation.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 6453,
        "total_tokens": 6953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 6453,
        "total_tokens": 6953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is a **pMOS** device, the circuit is a **pMOS common-source amplifier with source degeneration** \\(R_S\\) and drain/load resistor \\(R_D\\).\n\nLet the dc current \\(I\\) flow from \\(V_{DD}\\) through \\(R_S\\), through the pMOS, and then through \\(R_D\\) to ground.\n\n## 1. DC node relations\n\n\\[\nV_S = V_{DD}-IR_S\n\\]\n\n\\[\nV_D = V_{out}=IR_D\n\\]\n\n\\[\nV_{SG}=V_S-V_{in}=V_{DD}-IR_S-V_{in}\n\\]\n\n\\[\nV_{SD}=V_S-V_D=V_{DD}-I(R_S+R_D)\n\\]\n\nLet \\(V_T=|V_{TP}|\\).\n\n---\n\n## 2. Operating regions\n\n### Cutoff\n\nThe pMOS is off when\n\n\\[\nV_{SG}\\le V_T\n\\]\n\nSince \\(I\\approx 0\\) in cutoff,\n\n\\[\nV_{SG}\\approx V_{DD}-V_{in}\n\\]\n\nso cutoff occurs for\n\n\\[\nV_{in}\\ge V_{DD}-V_T\n\\]\n\nand therefore\n\n\\[\nV_{out}\\approx 0\n\\]\n\n---\n\n### Saturation\n\nFor saturation,\n\n\\[\nV_{SG}>V_T\n\\]\n\nand\n\n\\[\nV_{SD}\\ge V_{SG}-V_T\n\\]\n\nUsing the node equations, the saturation condition becomes\n\n\\[\nV_{out}\\le V_{in}+V_T\n\\]\n\nNeglecting channel-length modulation,\n\n\\[\nI=\\frac{\\beta_p}{2}\\left(V_{SG}-V_T\\right)^2\n\\]\n\nso\n\n\\[\nI=\\frac{\\beta_p}{2}\\left(V_{DD}-IR_S-V_{in}-V_T\\right)^2\n\\]\n\nand\n\n\\[\nV_{out}=IR_D\n\\]\n\n---\n\n### Triode region\n\nIf\n\n\\[\nV_{SD}<V_{SG}-V_T\n\\]\n\nor equivalently\n\n\\[\nV_{out}>V_{in}+V_T\n\\]\n\nthen the pMOS enters triode. The current is then approximately\n\n\\[\nI=\\beta_p\\left[\\left(V_{SG}-V_T\\right)V_{SD}-\\frac{V_{SD}^2}{2}\\right]\n\\]\n\nwith\n\n\\[\nV_{SG}=V_{DD}-IR_S-V_{in}\n\\]\n\nand\n\n\\[\nV_{SD}=V_{DD}-I(R_S+R_D)\n\\]\n\n---\n\n## 3. Small-signal voltage gain\n\nFor small-signal analysis, \\(V_{DD}\\) is ac ground. If \\(M_1\\) is biased in saturation and \\(r_o\\) is neglected, the gain is\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\n-\\frac{g_mR_D}{1+g_mR_S}\n\\]\n\nSo the circuit is **inverting**.\n\nIf\n\n\\[\ng_mR_S\\gg 1\n\\]\n\nthen\n\n\\[\nA_v\\approx -\\frac{R_D}{R_S}\n\\]\n\nThus \\(R_S\\) provides source degeneration, reducing gain but improving linearity and bias stability.\n\nIncluding body effect and finite output resistance,\n\n\\[\nA_v\n=\n-\\frac{g_mR_D}\n{1+(g_m+g_{mb})R_S+\\frac{R_S+R_D}{r_o}}\n\\]\n\nIf the body is tied to the source, then \\(g_{mb}=0\\).\n\n---\n\n## 4. Input/output resistance\n\nThe MOS gate draws essentially no dc current, so\n\n\\[\nR_{in}\\approx \\infty\n\\]\n\nThe small-signal output resistance is approximately\n\n\\[\nR_{out}\n=\nR_D\n\\parallel\n\\left[\nr_o+R_S+(g_m+g_{mb})r_oR_S\n\\right]\n\\]\n\n---\n\n## Summary\n\n- The circuit is a **pMOS common-source amplifier with source degeneration**.\n- Increasing \\(V_{in}\\) reduces pMOS current, so \\(V_{out}\\) decreases.\n- Therefore the stage is **inverting**.\n- The approximate small-signal gain is\n\n\\[\n\\boxed{\nA_v\\approx -\\frac{g_mR_D}{1+g_mR_S}\n}\n\\]\n\nand for strong degeneration,\n\n\\[\n\\boxed{\nA_v\\approx -\\frac{R_D}{R_S}\n}\n\\]",
        "format": "markdown",
        "sha256": "ddacd6c4d2bab820af431849a763a8d62d5d2706bd99afd4277150c30cade742"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain \u001b[0m\u001b[0m−gmRD/(1+gmRS). The body-effect and finite-ro refinements are also consistent.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 12880,
        "total_tokens": 14306,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 12880,
        "total_tokens": 14306,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistor is a **pMOS** device with its source at the top, drain at the bottom, and gate driven by \\(V_{in}\\). The circuit is a **pMOS common-source amplifier with source degeneration** \\(R_S\\) and drain/load resistor \\(R_D\\).\n\nLet \\(I_D\\) be the dc current flowing from \\(V_{DD}\\) through \\(R_S\\), through the pMOS, and then through \\(R_D\\) to ground.\n\n## 1. DC relations\n\n\\[\nV_S = V_{DD}-I_D R_S\n\\]\n\n\\[\nV_D = V_{out}=I_D R_D\n\\]\n\nFor the pMOS,\n\n\\[\nV_{SG}=V_S - V_{in}=V_{DD}-I_D R_S - V_{in}\n\\]\n\n\\[\nV_{SD}=V_S - V_D=V_{DD}-I_D(R_S+R_D)\n\\]\n\nAssuming body effect and channel-length modulation are neglected, in saturation,\n\n\\[\nI_D=\\frac{1}{2}k_p\\left(V_{SG}-|V_{TP}|\\right)^2\n\\]\n\nso\n\n\\[\nI_D=\\frac{1}{2}k_p\\left(V_{DD}-V_{in}-I_D R_S-|V_{TP}|\\right)^2\n\\]\n\nand\n\n\\[\nV_{out}=I_D R_D\n\\]\n\nThe pMOS is ON when\n\n\\[\nV_{SG}>|V_{TP}|\n\\]\n\nor approximately\n\n\\[\nV_{in}<V_{DD}-|V_{TP}|\n\\]\n\nIt is in saturation if\n\n\\[\nV_{SD}\\ge V_{SG}-|V_{TP}|\n\\]\n\nwhich simplifies to\n\n\\[\nV_{out}\\le V_{in}+|V_{TP}|\n\\]\n\nIf \\(V_{in}\\) is high enough, the pMOS turns off and\n\n\\[\nI_D=0,\\qquad V_{out}=0\n\\]\n\nbecause \\(R_D\\) pulls the output to ground.\n\n---\n\n## 2. Small-signal voltage gain\n\nAssume the transistor is biased in saturation. Replace \\(V_{DD}\\) by ac ground. Let \\(g_m\\) be the pMOS transconductance and \\(r_o\\) its small-signal output resistance.\n\nIgnoring body effect,\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\]\n\nis\n\n\\[\n\\boxed{\nA_v=-\\frac{g_m R_D}{1+g_mR_S+\\frac{R_S+R_D}{r_o}}\n}\n\\]\n\nEquivalently,\n\n\\[\n\\boxed{\nA_v=-\\frac{g_m r_o R_D}{r_o+R_D+R_S+g_m r_o R_S}\n}\n\\]\n\nIf \\(r_o\\to\\infty\\),\n\n\\[\n\\boxed{\nA_v\\approx -\\frac{g_mR_D}{1+g_mR_S}\n}\n\\]\n\nIf \\(g_mR_S\\gg 1\\),\n\n\\[\n\\boxed{\nA_v\\approx -\\frac{R_D}{R_S}\n}\n\\]\n\nSo \\(R_S\\) provides negative feedback, reducing gain but improving linearity and bias stability.\n\n---\n\n## 3. Input and output resistance\n\nThe MOS gate draws essentially no dc current, so\n\n\\[\n\\boxed{R_{in}\\approx \\infty}\n\\]\n\nAt low frequency, the output resistance looking into \\(V_{out}\\) is approximately\n\n\\[\n\\boxed{\nR_{out}=R_D \\parallel \\left[r_o+R_S+g_m r_o R_S\\right]\n}\n\\]\n\nIf body effect is included, replace \\(g_m\\) in the feedback term by \\(g_m+g_{mb}\\):\n\n\\[\nA_v=-\\frac{g_mR_D}{1+(g_m+g_{mb})R_S+\\frac{R_S+R_D}{r_o}}\n\\]\n\n---\n\n## 4. Qualitative behavior\n\n- Increasing \\(V_{in}\\) reduces \\(V_{SG}\\).\n- Therefore the pMOS current \\(I_D\\) decreases.\n- Since \\(V_{out}=I_D R_D\\), the output voltage decreases.\n\nThus the circuit is an **inverting amplifier**:\n\n\\[\n\\boxed{\\text{higher } V_{in} \\Rightarrow \\text{lower } V_{out}}\n\\]\n\nand\n\n\\[\n\\boxed{\\text{lower } V_{in} \\Rightarrow \\text{higher } V_{out}}\n\\]",
        "format": "markdown",
        "sha256": "9e295c7f35a74c14e7091363b1a24558e1c565a83f30f96cc0e2fd2f47d5d861"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS). Its finite-ro and body-effect refinements are also consistent with the topology.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 11843,
        "total_tokens": 13269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 11843,
        "total_tokens": 13269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistor is a **pMOS** device with its source at the top, so this is a **pMOS common-source stage with source degeneration** \\(R_S\\) and drain/load resistor \\(R_D\\). The output is taken at the drain.\n\nLet\n\n\\[\nI \\equiv I_{SD}\n\\]\n\nbe the pMOS current flowing downward from \\(V_{DD}\\) through \\(R_S\\), the transistor, and \\(R_D\\) to ground.\n\n## 1. DC node voltages\n\n\\[\nV_S = V_{DD}-IR_S\n\\]\n\n\\[\nV_{out}=V_D=IR_D\n\\]\n\nThus\n\n\\[\nV_{SG}=V_S-V_{in}=V_{DD}-IR_S-V_{in}\n\\]\n\n\\[\nV_{SD}=V_S-V_D=V_{DD}-I(R_S+R_D)\n\\]\n\nAssume body effect is ignored and let \\(V_T=|V_{TP}|\\).\n\n---\n\n## 2. Operating regions\n\n### Cutoff\n\nThe pMOS is off when\n\n\\[\nV_{SG}<V_T\n\\]\n\nSince \\(I=0\\) in cutoff,\n\n\\[\nV_S=V_{DD}\n\\]\n\nso cutoff occurs for\n\n\\[\nV_{DD}-V_{in}<V_T\n\\]\n\nor\n\n\\[\n\\boxed{V_{in}>V_{DD}-V_T}\n\\]\n\nThen\n\n\\[\n\\boxed{I=0,\\qquad V_{out}=0}\n\\]\n\n---\n\n### Saturation\n\nFor pMOS saturation,\n\n\\[\nV_{SD}\\ge V_{SG}-V_T\n\\]\n\nUsing the node voltages above,\n\n\\[\nV_{DD}-I(R_S+R_D)\\ge V_{DD}-IR_S-V_{in}-V_T\n\\]\n\nwhich simplifies to\n\n\\[\n\\boxed{V_{out}=IR_D\\le V_{in}+V_T}\n\\]\n\nIn saturation, ignoring channel-length modulation,\n\n\\[\nI=\\frac{1}{2}\\beta_p\\left(V_{SG}-V_T\\right)^2\n\\]\n\nso\n\n\\[\n\\boxed{I=\\frac{1}{2}\\beta_p\\left(V_{DD}-V_{in}-IR_S-V_T\\right)^2}\n\\]\n\nand\n\n\\[\n\\boxed{V_{out}=IR_D}\n\\]\n\nThis equation is implicit because the source voltage depends on the current through \\(R_S\\).\n\n---\n\n### Triode/linear region\n\nThe pMOS is in triode when\n\n\\[\nV_{SD}<V_{SG}-V_T\n\\]\n\nor equivalently\n\n\\[\n\\boxed{V_{out}>V_{in}+V_T}\n\\]\n\nThe current is then\n\n\\[\nI=\\beta_p\\left[\\left(V_{SG}-V_T\\right)V_{SD}-\\frac{V_{SD}^2}{2}\\right]\n\\]\n\nSubstituting the node voltages,\n\n\\[\n\\boxed{\nI=\\beta_p\\left[\n\\left(V_{DD}-V_{in}-IR_S-V_T\\right)\n\\left(V_{DD}-I(R_S+R_D)\\right)\n-\\frac{1}{2}\\left(V_{DD}-I(R_S+R_D)\\right)^2\n\\right]\n}\n\\]\n\nand again\n\n\\[\n\\boxed{V_{out}=IR_D}\n\\]\n\n---\n\n## 3. Qualitative behavior\n\n- For large \\(V_{in}\\), the pMOS turns off and\n\n\\[\nV_{out}\\approx 0\n\\]\n\n- As \\(V_{in}\\) decreases, the pMOS turns on, current increases, and\n\n\\[\nV_{out}=IR_D\n\\]\n\nincreases.\n\n- For very low \\(V_{in}\\), the pMOS is strongly on and behaves roughly like a small resistance. If its on-resistance is much smaller than \\(R_S+R_D\\),\n\n\\[\n\\boxed{V_{out}\\approx V_{DD}\\frac{R_D}{R_S+R_D}}\n\\]\n\nSo the circuit behaves like an **inverting pMOS amplifier/inverter**, but the high output level is limited by the divider formed by \\(R_S\\) and \\(R_D\\).\n\n---\n\n## 4. Small-signal gain\n\nAssuming the pMOS is biased in saturation, and neglecting \\(r_o\\),\n\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-\\frac{g_mR_D}{1+g_mR_S}}\n\\]\n\nThe negative sign shows that the circuit is inverting.\n\nIncluding finite output resistance \\(r_o\\),\n\n\\[\n\\boxed{\nA_v=-\\frac{g_mR_Dr_o}{R_D+r_o+R_S\\left(1+g_mr_o\\right)}\n}\n\\]\n\nIf \\(r_o\\to \\infty\\), this reduces to\n\n\\[\n\\boxed{A_v\\approx -\\frac{g_mR_D}{1+g_mR_S}}\n\\]\n\nThe input resistance is ideally very large:\n\n\\[\n\\boxed{R_{in}\\approx \\infty}\n\\]\n\nand the source resistor provides negative feedback, reducing the gain magnitude.",
        "format": "markdown",
        "sha256": "aff83412870f6bd163734d9a4029f88993641166ea3dd4272023f34b417203ed"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain −gm RD/(1 + gm RS), satisfying the golden solution’s full-credit rule. The additional analysis is consistent with the circuit.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 13524,
        "total_tokens": 14950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 13524,
        "total_tokens": 14950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower**, also called a **common-drain amplifier**. The drain is tied to \\(V_{DD}\\), the gate is driven by \\(V_{in}\\), and the output is taken at the source across \\(R_S\\).\n\nAssume an enhancement NMOS, ideal \\(V_{DD}\\), and first ignore body effect and channel-length modulation.\n\n---\n\n## 1. Basic node relations\n\nLet\n\n\\[\nV_S = V_{out}\n\\]\n\nThen\n\n\\[\nV_{GS}=V_{in}-V_{out}\n\\]\n\n\\[\nV_{DS}=V_{DD}-V_{out}\n\\]\n\nThe source resistor current is\n\n\\[\nI_D = I_{R_S}=\\frac{V_{out}}{R_S}\n\\]\n\nSo the transistor current must equal the resistor current.\n\n---\n\n## 2. DC operation\n\n### Cutoff region\n\nIf\n\n\\[\nV_{GS}<V_T\n\\]\n\nthen the NMOS is off. Since \\(R_S\\) pulls the source node to ground,\n\n\\[\nV_{out}=0\n\\]\n\nThus, approximately,\n\n\\[\nV_{in}<V_T \\quad \\Rightarrow \\quad V_{out}=0\n\\]\n\n---\n\n### Saturation region\n\nFor normal operation with \\(0 \\le V_{in} \\le V_{DD}\\), once the device is on it is usually in saturation.\n\nThe saturation condition is\n\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\]\n\nSubstituting,\n\n\\[\nV_{DD}-V_{out}\\ge V_{in}-V_{out}-V_T\n\\]\n\n\\[\nV_{in}\\le V_{DD}+V_T\n\\]\n\nSo if \\(V_{in}\\le V_{DD}\\), the NMOS is saturated whenever it is on.\n\nIn saturation,\n\n\\[\nI_D=\\frac{1}{2}k_n\\left(V_{GS}-V_T\\right)^2\n\\]\n\nTherefore,\n\n\\[\n\\frac{V_{out}}{R_S}\n=\n\\frac{1}{2}k_n\\left(V_{in}-V_{out}-V_T\\right)^2\n\\]\n\nThis equation determines the DC output voltage.\n\nDefine the overdrive voltage\n\n\\[\nV_{OV}=V_{GS}-V_T=V_{in}-V_{out}-V_T\n\\]\n\nThen\n\n\\[\nV_{out}=V_{in}-V_T-V_{OV}\n\\]\n\nand\n\n\\[\n\\frac{V_{out}}{R_S}=\\frac{1}{2}k_nV_{OV}^2\n\\]\n\nSolving explicitly,\n\n\\[\nV_{OV}\n=\n\\frac{\\sqrt{1+2k_nR_S\\left(V_{in}-V_T\\right)}-1}{k_nR_S}\n\\]\n\nso\n\n\\[\n\\boxed{\nV_{out}\n=\nV_{in}-V_T\n-\n\\frac{\\sqrt{1+2k_nR_S\\left(V_{in}-V_T\\right)}-1}{k_nR_S}\n}\n\\]\n\nfor \\(V_{in}>V_T\\).\n\nA useful approximation is\n\n\\[\n\\boxed{V_{out}\\approx V_{in}-V_{GS}}\n\\]\n\nSo the source “follows” the gate, but it is lower by roughly one gate-source voltage.\n\n---\n\n## 3. Small-signal voltage gain\n\nFor small-signal analysis, \\(V_{DD}\\) is AC ground.\n\nIgnoring body effect and \\(r_o\\), the small-signal source-node equation is\n\n\\[\n\\frac{v_{out}}{R_S}=g_m(v_{in}-v_{out})\n\\]\n\nSolving,\n\n\\[\nv_{out}\\left(\\frac{1}{R_S}+g_m\\right)=g_mv_{in}\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_mR_S}{1+g_mR_S}\n}\n\\]\n\nIf\n\n\\[\ng_mR_S\\gg 1\n\\]\n\nthen\n\n\\[\nA_v\\approx 1\n\\]\n\nSo the circuit behaves like a voltage buffer.\n\n---\n\n## 4. Including body effect and finite output resistance\n\nIf body effect and channel-length modulation are included,\n\n\\[\n\\boxed{\nA_v\n=\n\\frac{g_m}\n{g_m+g_{mb}+g_{ds}+\\frac{1}{R_S}}\n}\n\\]\n\nwhere\n\n\\[\ng_{ds}=\\frac{1}{r_o}\n\\]\n\nand \\(g_{mb}\\) is the body-effect transconductance.\n\nBody effect reduces the gain and increases the effective threshold voltage as \\(V_{out}\\) rises.\n\n---\n\n## 5. Input and output resistance\n\nThe MOS gate draws almost no DC current, so\n\n\\[\n\\boxed{R_{in}\\approx \\infty}\n\\]\n\nThe small-signal output resistance looking into the source is approximately\n\n\\[\n\\boxed{\nR_{out}\n\\approx\n\\left(g_m+g_{mb}+g_{ds}+\\frac{1}{R_S}\\right)^{-1}\n}\n\\]\n\nIf body effect and \\(r_o\\) are ignored,\n\n\\[\n\\boxed{\nR_{out}\\approx \\frac{1}{g_m}\\parallel R_S\n}\n\\]\n\n---\n\n## 6. Summary\n\nThis circuit is a **non-inverting source follower**.\n\nKey properties:\n\n\\[\n\\boxed{V_{out}<V_{in}}\n\\]\n\n\\[\n\\boxed{A_v<1}\n\\]\n\n\\[\n\\boxed{R_{in}\\text{ high}}\n\\]\n\n\\[\n\\boxed{R_{out}\\text{ low}}\n\\]\n\nIt is useful as a buffer or level shifter, but it cannot produce a full rail-to-rail high output. For \\(V_{in}=V_{DD}\\),\n\n\\[\nV_{out}\\approx V_{DD}-V_T-V_{OV}\n\\]\n\nso the output high level is degraded by approximately one gate-source voltage.",
        "format": "markdown",
        "sha256": "28b6017dcf96dace2ad03d21e2ecc193ae1c91c5a30808013c3fc41b828ee51c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS source follower and gives its positive, less-than-unity gain, \\(g_mR_S/(1+g_mR_S)\\). The supplementary body-effect and output-resistance discussion is also consistent with the topology.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 9584,
        "total_tokens": 10733,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 9584,
        "total_tokens": 10733,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an enhancement NMOS, the circuit is a **source follower** or **common-drain amplifier**. The drain is tied to \\(V_{DD}\\), the gate is driven by \\(V_{in}\\), and the output is taken at the source across \\(R_S\\).\n\n---\n\n## 1. Basic operation\n\nThe gate draws essentially no dc current, so \\(V_{in}\\) controls the NMOS current. The source voltage rises until the resistor current equals the MOSFET drain/source current:\n\n\\[\nI_D = I_S = \\frac{V_{out}}{R_S}\n\\]\n\nand\n\n\\[\nV_{GS}=V_{in}-V_{out}\n\\]\n\nThe output therefore follows the input, but is lower by approximately one gate-source voltage:\n\n\\[\nV_{out}\\approx V_{in}-V_{GS}\n\\]\n\nSo the circuit is non-inverting with voltage gain slightly less than 1.\n\n---\n\n## 2. DC transfer characteristic\n\nIgnoring channel-length modulation and body effect, in saturation,\n\n\\[\nI_D=\\frac{1}{2}\\beta \\left(V_{GS}-V_T\\right)^2\n\\]\n\nwhere\n\n\\[\n\\beta = \\mu_n C_{ox}\\frac{W}{L}\n\\]\n\nSince\n\n\\[\nV_{GS}=V_{in}-V_{out}\n\\]\n\nand\n\n\\[\nI_D=\\frac{V_{out}}{R_S}\n\\]\n\nwe get\n\n\\[\n\\frac{V_{out}}{R_S}\n=\n\\frac{1}{2}\\beta\n\\left(V_{in}-V_{out}-V_T\\right)^2\n\\]\n\nThis equation gives the dc input-output relation.\n\nFor \\(V_{in}\\le V_T\\), the NMOS is off, so\n\n\\[\nV_{out}=0\n\\]\n\nFor \\(V_{in}>V_T\\), solving gives\n\n\\[\nV_{out}\n=\nV_{in}-V_T-\n\\frac{\\sqrt{1+2\\beta R_S\\left(V_{in}-V_T\\right)}-1}\n{\\beta R_S}\n\\]\n\nEquivalently, defining the overdrive voltage\n\n\\[\nV_{OV}=V_{GS}-V_T\n\\]\n\nwe have\n\n\\[\nV_{out}=V_{in}-V_T-V_{OV}\n\\]\n\nwith\n\n\\[\nV_{OV}\n=\n\\frac{\\sqrt{1+2\\beta R_S\\left(V_{in}-V_T\\right)}-1}\n{\\beta R_S}\n\\]\n\n---\n\n## 3. Region of operation\n\nThe NMOS is in saturation if\n\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\]\n\nHere,\n\n\\[\nV_{DS}=V_{DD}-V_{out}\n\\]\n\nand\n\n\\[\nV_{GS}=V_{in}-V_{out}\n\\]\n\nTherefore the saturation condition becomes\n\n\\[\nV_{DD}-V_{out}\\ge V_{in}-V_{out}-V_T\n\\]\n\nso\n\n\\[\nV_{in}\\le V_{DD}+V_T\n\\]\n\nThus, if \\(V_{in}\\le V_{DD}\\), the transistor is normally in saturation whenever it is on.\n\nThe output cannot reach \\(V_{DD}\\). For a source follower,\n\n\\[\nV_{out}<V_{in}-V_T\n\\]\n\nand also\n\n\\[\nV_{out}<V_{DD}\n\\]\n\n---\n\n## 4. Small-signal gain\n\nAt a dc bias point, the small-signal transconductance is\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}\n\\]\n\nFor saturation,\n\n\\[\ng_m=\\beta V_{OV}=\\frac{2I_D}{V_{OV}}\n\\]\n\nIgnoring body effect and channel-length modulation, the small-signal voltage gain is\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m R_S}{1+g_m R_S}\n\\]\n\nSo,\n\n\\[\nA_v<1\n\\]\n\nIf\n\n\\[\ng_m R_S\\gg 1\n\\]\n\nthen\n\n\\[\nA_v\\approx 1\n\\]\n\nwhich is why this circuit is called a source follower.\n\nIncluding output resistance \\(r_o\\) and body effect \\(g_{mb}\\),\n\n\\[\nA_v=\n\\frac{g_m}\n{g_m+g_{mb}+g_{ds}+\\frac{1}{R_S}}\n\\]\n\nwhere\n\n\\[\ng_{ds}=\\frac{1}{r_o}\n\\]\n\n---\n\n## 5. Input and output resistance\n\nThe gate draws negligible current, so the low-frequency input resistance is very large:\n\n\\[\nR_{in}\\approx \\infty\n\\]\n\nThe small-signal output resistance, looking into the source with the input ac-grounded, is approximately\n\n\\[\nR_{out}\n=\n\\left(\ng_m+g_{mb}+g_{ds}+\\frac{1}{R_S}\n\\right)^{-1}\n\\]\n\nIgnoring body effect and \\(r_o\\),\n\n\\[\nR_{out}\\approx \\frac{1}{g_m+\\frac{1}{R_S}}\n=\n\\frac{1/g_m \\parallel R_S}{}\n\\]\n\nSo the circuit has high input resistance and relatively low output resistance.\n\n---\n\n## 6. Summary\n\nThis circuit is an NMOS source follower.\n\n\\[\n\\boxed{V_{out}\\approx V_{in}-V_{GS}}\n\\]\n\nIt is non-inverting, has voltage gain slightly less than unity, high input resistance, and low output resistance.\n\nFor small signals,\n\n\\[\n\\boxed{\nA_v=\\frac{g_m R_S}{1+g_m R_S}\n}\n\\]\n\nignoring body effect and channel-length modulation. The output follows the input but is shifted downward by roughly one NMOS gate-source voltage.",
        "format": "markdown",
        "sha256": "22e0712ca1e2cd8530a3eda8d6e50f73d90880d4886a0a5032a23c262728427b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain as \\(g_mR_S/(1+g_mR_S)\\), satisfying the golden solution’s full-credit rule. The additional analysis is consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 5382,
        "total_tokens": 6531,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 5382,
        "total_tokens": 6531,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower**, also called a **common-drain amplifier**.\n\n- Drain of \\(M_1\\) is tied to \\(V_{DD}\\)\n- Gate is driven by \\(V_{in}\\)\n- Source is the output node \\(V_{out}\\)\n- \\(R_S\\) provides the DC return path to ground\n\n---\n\n## 1. DC operation\n\nAssume an NMOS with threshold voltage \\(V_T\\), neglecting channel-length modulation and body effect.\n\n### Cutoff region\n\nIf\n\n\\[\nV_{in} \\le V_T\n\\]\n\nthen the NMOS is off, so no current flows through \\(R_S\\). Therefore\n\n\\[\nV_{out}=0\n\\]\n\n---\n\n### On region\n\nWhen\n\n\\[\nV_{in} > V_T\n\\]\n\nthe NMOS turns on. The source voltage rises until the current through the transistor equals the current through \\(R_S\\).\n\nFor normal operation, the transistor is in saturation because the drain is tied to \\(V_{DD}\\). The saturation current is\n\n\\[\nI_D=\\frac{1}{2}k_n\\left(V_{GS}-V_T\\right)^2\n\\]\n\nwhere\n\n\\[\nV_{GS}=V_{in}-V_{out}\n\\]\n\nThe resistor current is\n\n\\[\nI_R=\\frac{V_{out}}{R_S}\n\\]\n\nEquating currents:\n\n\\[\n\\frac{V_{out}}{R_S}\n=\n\\frac{1}{2}k_n\\left(V_{in}-V_{out}-V_T\\right)^2\n\\]\n\nThis equation determines the DC output voltage.\n\nEquivalently,\n\n\\[\nV_{out}\\approx V_{in}-V_{GS}\n\\]\n\nso the output follows the input, but is lower by approximately one gate-source voltage.\n\n---\n\n## 2. Explicit DC solution\n\nLet\n\n\\[\n\\Delta = V_{in}-V_T\n\\]\n\nand assume \\(\\Delta>0\\). Then\n\n\\[\n\\frac{V_{out}}{R_S}\n=\n\\frac{1}{2}k_n\\left(\\Delta - V_{out}\\right)^2\n\\]\n\nSolving,\n\n\\[\nV_{out}\n=\n\\Delta\n-\n\\frac{\\sqrt{1+2k_nR_S\\Delta}-1}{k_nR_S}\n\\]\n\nSo for \\(V_{in}>V_T\\),\n\n\\[\n\\boxed{\nV_{out}\n=\nV_{in}-V_T\n-\n\\frac{\\sqrt{1+2k_nR_S\\left(V_{in}-V_T\\right)}-1}{k_nR_S}\n}\n\\]\n\nFor \\(V_{in}\\le V_T\\),\n\n\\[\n\\boxed{V_{out}=0}\n\\]\n\n---\n\n## 3. Small-signal voltage gain\n\nAround a DC bias point, the MOSFET small-signal drain current is\n\n\\[\ni_d=g_m v_{gs}\n\\]\n\nSince\n\n\\[\nv_{gs}=v_{in}-v_{out}\n\\]\n\nand the small-signal resistor current is\n\n\\[\ni_R=\\frac{v_{out}}{R_S}\n\\]\n\nwe get\n\n\\[\n\\frac{v_{out}}{R_S}\n=\ng_m\\left(v_{in}-v_{out}\\right)\n\\]\n\nTherefore,\n\n\\[\nv_{out}\\left(\\frac{1}{R_S}+g_m\\right)\n=\ng_m v_{in}\n\\]\n\nSo the small-signal gain is\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m R_S}{1+g_m R_S}\n}\n\\]\n\nBecause this is a source follower,\n\n\\[\n\\boxed{0<A_v<1}\n\\]\n\nIf \\(g_mR_S\\gg 1\\),\n\n\\[\nA_v\\approx 1\n\\]\n\nso the output closely follows the input.\n\n---\n\n## 4. Including body effect and output resistance\n\nA more accurate gain expression is\n\n\\[\n\\boxed{\nA_v\n=\n\\frac{g_m}\n{g_m+g_{mb}+g_{ds}+\\frac{1}{R_S}}\n}\n\\]\n\nwhere:\n\n- \\(g_m\\) is the gate transconductance\n- \\(g_{mb}\\) is the body-effect transconductance\n- \\(g_{ds}=1/r_o\\) is due to channel-length modulation\n\nEquivalently,\n\n\\[\nA_v\n=\n\\frac{g_m(R_S\\parallel r_o)}\n{1+(g_m+g_{mb})(R_S\\parallel r_o)}\n\\]\n\nBody effect reduces the gain and increases the effective threshold voltage.\n\n---\n\n## 5. Output resistance\n\nWith the input AC-grounded, the small-signal output resistance is approximately\n\n\\[\n\\boxed{\nR_{out}\n\\approx\n\\frac{1}\n{g_m+g_{mb}+g_{ds}+\\frac{1}{R_S}}\n}\n\\]\n\nIf body effect and channel-length modulation are ignored,\n\n\\[\n\\boxed{\nR_{out}\\approx R_S \\parallel \\frac{1}{g_m}\n}\n\\]\n\n---\n\n## 6. Key properties\n\nThis circuit:\n\n- Is a **non-inverting buffer**\n- Has voltage gain slightly less than unity\n- Has high input resistance\n- Has relatively low output resistance\n- Level-shifts the signal downward by approximately \\(V_{GS}\\)\n- Cannot drive \\(V_{out}\\) all the way to \\(V_{DD}\\)\n\nFor large \\(V_{in}\\),\n\n\\[\nV_{out}\\approx V_{in}-V_{GS}\n\\]\n\nso if \\(V_{in}=V_{DD}\\), then typically\n\n\\[\nV_{out}<V_{DD}\n\\]\n\nThe output high level is limited by the required gate-source voltage of the NMOS.",
        "format": "markdown",
        "sha256": "fe09a9f476d6b9db3f8826fb2151921e36699a278312ecc8f72b95f2afc12a64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, less-than-unity gain \\(g_mR_S/(1+g_mR_S)\\); the output-resistance discussion is also consistent.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 6414,
        "total_tokens": 7563,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 6414,
        "total_tokens": 7563,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an nMOS transistor, the circuit is a **common-gate nMOS stage**:\n\n- Gate of \\(M_1\\): tied to \\(V_{DD}\\)\n- Source of \\(M_1\\): driven by \\(V_{in}\\)\n- Drain of \\(M_1\\): connected to \\(R_D\\) and is \\(V_{out}\\)\n\nSo,\n\n\\[\nV_G=V_{DD},\\qquad V_S=V_{in},\\qquad V_D=V_{out}\n\\]\n\n\\[\nV_{GS}=V_{DD}-V_{in}\n\\]\n\n\\[\nV_{DS}=V_{out}-V_{in}\n\\]\n\n---\n\n## 1. Qualitative operation\n\nThe resistor \\(R_D\\) tries to pull \\(V_{out}\\) up to \\(V_{DD}\\). The nMOS pulls \\(V_{out}\\) down toward \\(V_{in}\\) when it is on.\n\n### If \\(V_{in}\\) is high\n\nIf\n\n\\[\nV_{in} \\ge V_{DD}-V_T\n\\]\n\nthen\n\n\\[\nV_{GS}\\le V_T\n\\]\n\nso \\(M_1\\) is off. Therefore no current flows through \\(R_D\\), and\n\n\\[\nV_{out}=V_{DD}\n\\]\n\n### If \\(V_{in}\\) is low\n\nThen\n\n\\[\nV_{GS}=V_{DD}-V_{in}>V_T\n\\]\n\nso \\(M_1\\) turns on. Current flows from \\(V_{DD}\\) through \\(R_D\\), through \\(M_1\\), and into the \\(V_{in}\\) source. Thus \\(V_{out}\\) is pulled downward.\n\nSo the circuit is **non-inverting**:\n\n\\[\nV_{in}\\uparrow \\Rightarrow V_{out}\\uparrow\n\\]\n\n\\[\nV_{in}\\downarrow \\Rightarrow V_{out}\\downarrow\n\\]\n\n---\n\n## 2. DC analysis\n\nLet\n\n\\[\n\\beta_n=\\mu_n C_{ox}\\frac WL\n\\]\n\nand ignore channel-length modulation.\n\nThe resistor current is\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}\n\\]\n\n### Cutoff region\n\nIf\n\n\\[\nV_{in}\\ge V_{DD}-V_T\n\\]\n\nthen \\(M_1\\) is off:\n\n\\[\nI_D=0\n\\]\n\n\\[\n\\boxed{V_{out}=V_{DD}}\n\\]\n\n---\n\n### Saturation region\n\nFor saturation,\n\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\]\n\n\\[\nV_{out}-V_{in}\\ge V_{DD}-V_{in}-V_T\n\\]\n\nso\n\n\\[\nV_{out}\\ge V_{DD}-V_T\n\\]\n\nThe drain current is\n\n\\[\nI_D=\\frac12\\beta_n\\left(V_{DD}-V_{in}-V_T\\right)^2\n\\]\n\nTherefore,\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\frac12\\beta_n\\left(V_{DD}-V_{in}-V_T\\right)^2\n\\]\n\nso\n\n\\[\n\\boxed{\nV_{out}\n=\nV_{DD}\n-\n\\frac12 R_D\\beta_n\\left(V_{DD}-V_{in}-V_T\\right)^2\n}\n\\]\n\nThis expression is valid as long as\n\n\\[\nV_{out}\\ge V_{DD}-V_T\n\\]\n\n---\n\n### Triode region\n\nIf\n\n\\[\nV_{out}<V_{DD}-V_T\n\\]\n\nthen \\(M_1\\) is in the triode region.\n\nThe drain current is\n\n\\[\nI_D=\n\\beta_n\n\\left[\n\\left(V_{GS}-V_T\\right)V_{DS}\n-\\frac12 V_{DS}^2\n\\right]\n\\]\n\nSubstituting,\n\n\\[\nV_{GS}-V_T=V_{DD}-V_{in}-V_T\n\\]\n\n\\[\nV_{DS}=V_{out}-V_{in}\n\\]\n\ngives\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\beta_n\n\\left[\n\\left(V_{DD}-V_{in}-V_T\\right)\\left(V_{out}-V_{in}\\right)\n-\\frac12\\left(V_{out}-V_{in}\\right)^2\n\\right]\n\\]\n\nThat equation determines \\(V_{out}\\) in the triode region.\n\n---\n\n## 3. Small-signal gain\n\nFor small-signal analysis, \\(V_{DD}\\) is AC ground, so the gate is AC-grounded. This is a common-gate amplifier.\n\nIgnoring \\(r_o\\),\n\n\\[\nv_{gs}=v_g-v_s=0-v_{in}=-v_{in}\n\\]\n\nA rise in \\(v_{in}\\) reduces drain current, which reduces the voltage drop across \\(R_D\\), so \\(v_{out}\\) rises. Therefore the gain is positive:\n\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}\\approx +g_m R_D}\n\\]\n\nIncluding channel-length modulation,\n\n\\[\n\\boxed{\nA_v\\approx +g_m\\left(R_D\\parallel r_o\\right)\n}\n\\]\n\nMore exactly,\n\n\\[\n\\boxed{\nA_v=(g_m+g_o)\\left(R_D\\parallel r_o\\right)\n}\n\\]\n\nwhere\n\n\\[\ng_o=\\frac1{r_o}\n\\]\n\nIf body effect is included, replace \\(g_m\\) by \\(g_m+g_{mb}\\).\n\n---\n\n## 4. Input and output resistance\n\nBecause the input is applied to the source of an nMOS in common-gate configuration, the input resistance is low:\n\n\\[\n\\boxed{\nR_{in}\\approx \\frac1{g_m}\n}\n\\]\n\nIncluding body effect,\n\n\\[\n\\boxed{\nR_{in}\\approx \\frac1{g_m+g_{mb}}\n}\n\\]\n\nThe output resistance is approximately\n\n\\[\n\\boxed{\nR_{out}\\approx R_D\\parallel r_o\n}\n\\]\n\n---\n\n## Summary\n\nThis circuit is a **common-gate nMOS amplifier** with a resistive drain load.\n\n- It is **non-inverting**.\n- For high \\(V_{in}\\), \\(M_1\\) turns off and \\(V_{out}=V_{DD}\\).\n- For low \\(V_{in}\\), \\(M_1\\) turns on and pulls \\(V_{out}\\) down.\n- Small-signal voltage gain is approximately\n\n\\[\n\\boxed{A_v\\approx +g_mR_D}\n\\]\n\n- Input resistance is low:\n\n\\[\n\\boxed{R_{in}\\approx 1/g_m}\n\\]\n\n- Output resistance is roughly:\n\n\\[\n\\boxed{R_{out}\\approx R_D\\parallel r_o}\n\\]",
        "format": "markdown",
        "sha256": "b606f7c990ed2a27fee5943dac62f27053067b3907d95ff420b7c2ccd8c5cb19"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology, positive gain, and low source input resistance, with appropriate finite-output-resistance and body-effect qualifications. The additional DC-region analysis is consistent with the stated idealized assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 11836,
        "total_tokens": 12952,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 11836,
        "total_tokens": 12952,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an nMOS and the body effect/channel-length modulation are ignored unless noted, the circuit is a **resistor-loaded common-gate nMOS stage**:\n\n- Gate: tied to \\(V_{DD}\\)\n- Source/input: \\(V_{\\text{in}}\\)\n- Drain/output: \\(V_{\\text{out}}\\)\n- Load: \\(R_D\\) to \\(V_{DD}\\)\n\nSo\n\n\\[\nV_{GS}=V_{DD}-V_{\\text{in}}\n\\]\n\n\\[\nV_{DS}=V_{\\text{out}}-V_{\\text{in}}\n\\]\n\nand the resistor current is\n\n\\[\nI_D=\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n\\]\n\n---\n\n## 1. Qualitative operation\n\n### \\(V_{\\text{in}}\\) low\nThen \\(V_{GS}\\) is large, so \\(M_1\\) turns on. Current flows from \\(V_{DD}\\) through \\(R_D\\), through \\(M_1\\), and into the input source. The output is pulled downward toward \\(V_{\\text{in}}\\).\n\n### \\(V_{\\text{in}}\\) high\nWhen\n\n\\[\nV_{\\text{in}} \\ge V_{DD}-V_T\n\\]\n\nthen\n\n\\[\nV_{GS}\\le V_T\n\\]\n\nso \\(M_1\\) turns off. No current flows through \\(R_D\\), so\n\n\\[\nV_{\\text{out}}=V_{DD}\n\\]\n\nThus the circuit is **non-inverting**: increasing \\(V_{\\text{in}}\\) tends to increase \\(V_{\\text{out}}\\).\n\n---\n\n## 2. DC transfer characteristic\n\nLet\n\n\\[\n\\beta_n=\\mu_n C_{\\text{ox}}\\frac WL\n\\]\n\nand define\n\n\\[\nV_{OV}=V_{GS}-V_T=V_{DD}-V_{\\text{in}}-V_T\n\\]\n\n### Cutoff region\n\nIf\n\n\\[\nV_{\\text{in}}\\ge V_{DD}-V_T\n\\]\n\nthen \\(M_1\\) is off:\n\n\\[\nI_D=0\n\\]\n\n\\[\n\\boxed{V_{\\text{out}}=V_{DD}}\n\\]\n\n---\n\n### Saturation region\n\nSaturation requires\n\n\\[\nV_{DS}\\ge V_{OV}\n\\]\n\nUsing the node voltages,\n\n\\[\nV_{\\text{out}}-V_{\\text{in}}\\ge V_{DD}-V_{\\text{in}}-V_T\n\\]\n\nso\n\n\\[\n\\boxed{V_{\\text{out}}\\ge V_{DD}-V_T}\n\\]\n\nIn saturation,\n\n\\[\nI_D=\\frac12\\beta_n\\left(V_{DD}-V_{\\text{in}}-V_T\\right)^2\n\\]\n\nEquating this with the resistor current,\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n=\n\\frac12\\beta_n\\left(V_{DD}-V_{\\text{in}}-V_T\\right)^2\n\\]\n\nso\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}\n-\n\\frac12\\beta_n R_D\n\\left(V_{DD}-V_{\\text{in}}-V_T\\right)^2\n}\n\\]\n\nThis expression is valid as long as\n\n\\[\nV_{\\text{out}}\\ge V_{DD}-V_T\n\\]\n\n---\n\n### Triode region\n\nIf the output is pulled below \\(V_{DD}-V_T\\), then \\(M_1\\) enters triode:\n\n\\[\nV_{\\text{out}}<V_{DD}-V_T\n\\]\n\nThe triode current is\n\n\\[\nI_D=\n\\beta_n\n\\left[\n\\left(V_{DD}-V_{\\text{in}}-V_T\\right)\n\\left(V_{\\text{out}}-V_{\\text{in}}\\right)\n-\n\\frac12\n\\left(V_{\\text{out}}-V_{\\text{in}}\\right)^2\n\\right]\n\\]\n\nand the output is found from\n\n\\[\n\\boxed{\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n=\n\\beta_n\n\\left[\n\\left(V_{DD}-V_{\\text{in}}-V_T\\right)\n\\left(V_{\\text{out}}-V_{\\text{in}}\\right)\n-\n\\frac12\n\\left(V_{\\text{out}}-V_{\\text{in}}\\right)^2\n\\right]\n}\n\\]\n\n---\n\n## 3. Small-signal gain\n\nFor small-signal operation, \\(V_{DD}\\) is AC ground, so the gate is AC-grounded. This is a **common-gate amplifier**.\n\nIgnoring \\(r_o\\) and body effect:\n\n\\[\nv_{gs}=-v_{\\text{in}}\n\\]\n\n\\[\ni_d=g_m v_{gs}=-g_m v_{\\text{in}}\n\\]\n\nThe output voltage is\n\n\\[\nv_{\\text{out}}=-i_d R_D\n\\]\n\ntherefore\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}=+g_m R_D\n}\n\\]\n\nSo the gain is positive: the circuit is **non-inverting**.\n\nIncluding \\(r_o\\) and body effect,\n\n\\[\n\\boxed{\nA_v\n=\n\\frac{g_m+g_{mb}+g_{ds}}{\\frac1{R_D}+g_{ds}}\n}\n\\]\n\nwhere \\(g_{ds}=1/r_o\\). Usually,\n\n\\[\nA_v\\approx (g_m+g_{mb})(R_D\\parallel r_o)\n\\]\n\n---\n\n## 4. Important practical notes\n\n- The input is applied to the **source**, so the input resistance is low:\n\n\\[\nR_{\\text{in}}\\approx \\frac1{g_m}\n\\]\n\n- The input source must be able to sink current when \\(M_1\\) is on.\n- The circuit consumes static power whenever \\(M_1\\) conducts:\n\n\\[\nP\\approx V_{DD}I_D\n\\]\n\n- This is not a CMOS inverter; it is a resistor-loaded common-gate stage / non-inverting level-shifting stage.",
        "format": "markdown",
        "sha256": "a82c5a9af0854087e4b8ddd7a7917850d1c82522cbf2164089a9d28f2c55af40"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology, gives the low input resistance, and derives the positive gain with appropriate output-resistance and body-effect qualifications. The additional DC analysis is consistent with the circuit.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 13246,
        "total_tokens": 14362,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 13246,
        "total_tokens": 14362,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an nMOS and the bulk effect is neglected, the circuit is a **common-gate nMOS stage with a resistive load**. The gate is tied to \\(V_{DD}\\), the source is driven by \\(V_{in}\\), and the drain is the output node.\n\nLet\n\n\\[\nV_G=V_{DD},\\qquad V_S=V_{in},\\qquad V_D=V_{out}\n\\]\n\nso\n\n\\[\nV_{GS}=V_{DD}-V_{in}\n\\]\n\nand\n\n\\[\nV_{DS}=V_{out}-V_{in}.\n\\]\n\nThe resistor current equals the drain current:\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}.\n\\]\n\n---\n\n## 1. DC operation\n\nDefine the overdrive voltage\n\n\\[\nV_{OV}=V_{GS}-V_T=V_{DD}-V_{in}-V_T.\n\\]\n\n### Cutoff\n\nIf\n\n\\[\nV_{in}\\ge V_{DD}-V_T,\n\\]\n\nthen \\(V_{GS}\\le V_T\\), so \\(M_1\\) is off:\n\n\\[\nI_D=0\n\\]\n\nand therefore\n\n\\[\nV_{out}=V_{DD}.\n\\]\n\n---\n\n### Saturation\n\nIf \\(M_1\\) is on and in saturation,\n\n\\[\nV_{DS}\\ge V_{OV}.\n\\]\n\nSince\n\n\\[\nV_{DS}=V_{out}-V_{in},\n\\]\n\nthe saturation condition becomes\n\n\\[\nV_{out}\\ge V_{DD}-V_T.\n\\]\n\nUsing the square-law model,\n\n\\[\nI_D=\\frac{1}{2}k_n\\left(V_{DD}-V_{in}-V_T\\right)^2,\n\\]\n\nwhere\n\n\\[\nk_n=\\mu_n C_{ox}\\frac{W}{L}.\n\\]\n\nThus\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\frac{1}{2}k_n\\left(V_{DD}-V_{in}-V_T\\right)^2\n\\]\n\nso\n\n\\[\n\\boxed{\nV_{out}\n=\nV_{DD}\n-\n\\frac{1}{2}k_nR_D\n\\left(V_{DD}-V_{in}-V_T\\right)^2\n}\n\\]\n\nvalid while \\(V_{out}\\ge V_{DD}-V_T\\).\n\n---\n\n### Triode region\n\nIf the transistor is strongly on, \\(V_{out}\\) drops below \\(V_{DD}-V_T\\), and the device enters triode:\n\n\\[\nV_{DS}<V_{OV}.\n\\]\n\nThen\n\n\\[\nI_D=\nk_n\\left[\n\\left(V_{DD}-V_{in}-V_T\\right)\\left(V_{out}-V_{in}\\right)\n-\n\\frac{1}{2}\\left(V_{out}-V_{in}\\right)^2\n\\right].\n\\]\n\nEquating to the resistor current:\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\nk_n\\left[\n\\left(V_{DD}-V_{in}-V_T\\right)\\left(V_{out}-V_{in}\\right)\n-\n\\frac{1}{2}\\left(V_{out}-V_{in}\\right)^2\n\\right].\n\\]\n\nThis determines \\(V_{out}\\) in the triode region.\n\n---\n\n## 2. Qualitative behavior\n\n- For low \\(V_{in}\\), \\(V_{GS}\\) is large, so \\(M_1\\) turns on strongly and pulls \\(V_{out}\\) down toward \\(V_{in}\\).\n- For high \\(V_{in}\\), \\(V_{GS}\\) decreases.\n- Once \\(V_{in}\\ge V_{DD}-V_T\\), the nMOS turns off and \\(R_D\\) pulls the output up to \\(V_{DD}\\).\n\nTherefore this circuit is **non-inverting**:\n\n\\[\nV_{in}\\uparrow \\quad \\Rightarrow \\quad I_D\\downarrow \\quad \\Rightarrow \\quad V_{out}\\uparrow.\n\\]\n\n---\n\n## 3. Small-signal gain\n\nWith \\(V_{DD}\\) as AC ground, this is a common-gate amplifier. Ignoring body effect and assuming saturation,\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\\approx +g_mR_D.\n\\]\n\nIncluding finite output resistance \\(r_o\\),\n\n\\[\nA_v\n=\n\\frac{g_m+g_o}{g_o+\\frac{1}{R_D}},\n\\]\n\nwhere\n\n\\[\ng_o=\\frac{1}{r_o}.\n\\]\n\nIf \\(r_o\\gg R_D\\), then\n\n\\[\n\\boxed{A_v\\approx +g_mR_D}\n\\]\n\nso the gain is positive.\n\n---\n\n## 4. Input and output resistance\n\nBecause the input is applied at the source, the input resistance is low:\n\n\\[\nR_{in}\\approx \\frac{1}{g_m}.\n\\]\n\nThe output resistance is approximately\n\n\\[\nR_{out}\\approx R_D\\parallel r_o.\n\\]\n\nSo the circuit is a **low-input-impedance, non-inverting common-gate stage** with a resistive load.",
        "format": "markdown",
        "sha256": "13f0c59f2953d250f9ca2b03f40a6df7fd84fbec50b6f304157413d03e43f6bf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology, gives the low input resistance and positive gain, and its added DC and finite-output-resistance analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 16142,
        "total_tokens": 17258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 16142,
        "total_tokens": 17258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As drawn, the circuit **does not amplify \\(V_{in}\\)**.\n\n### Key observation\n\nThe source of \\(M_1\\) is tied directly to ground. The right side of \\(C_1\\) is connected to that same grounded node, so \\(C_1\\) is simply connected from the input source to ground.\n\nTherefore,\n\n\\[\nv_s = 0\n\\]\n\nfor both DC and small signal, regardless of \\(v_{in}\\). The input signal only drives current through \\(C_1\\) into ground:\n\n\\[\ni_{C1}=C_1\\frac{dv_{in}}{dt}\n\\]\n\nIt does not modulate the MOSFET.\n\n---\n\n### Small-signal behavior\n\nThe gate is biased by \\(V_b\\), so for small-signal analysis the gate is at AC ground. Since the source is also grounded,\n\n\\[\nv_{gs}=0\n\\]\n\nThus the MOSFET drain current has no signal component due to \\(v_{in}\\). Therefore,\n\n\\[\n\\boxed{\\frac{v_{out}}{v_{in}}=0}\n\\]\n\nassuming an ideal ground and ideal MOSFET model.\n\n---\n\n### DC operating point\n\nThe circuit is simply a DC-biased NMOS with source grounded, gate voltage \\(V_b\\), and drain resistor \\(R_D\\).\n\n\\[\nV_{GS}=V_b\n\\]\n\nIf \\(V_b \\le V_T\\), the transistor is off:\n\n\\[\nI_D \\approx 0\n\\]\n\n\\[\n\\boxed{V_{out}=V_{DD}}\n\\]\n\nIf \\(V_b>V_T\\), the transistor conducts and\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}\n\\]\n\nIn saturation, neglecting channel-length modulation,\n\n\\[\nI_D=\\frac{1}{2}k_n(V_b-V_T)^2\n\\]\n\nso\n\n\\[\n\\boxed{V_{out}=V_{DD}-\\frac{1}{2}k_nR_D(V_b-V_T)^2}\n\\]\n\nvalid if\n\n\\[\nV_{out}\\ge V_b-V_T\n\\]\n\nOtherwise the device operates in triode.\n\n---\n\n### Conclusion\n\nAs drawn, \\(C_1\\) does not couple the input signal into the transistor. The input is effectively connected to ground through the capacitor, and the output is determined only by the DC bias \\(V_b\\), \\(V_{DD}\\), \\(R_D\\), and the MOSFET parameters.\n\nIf the intention was to make a common-gate amplifier, the direct ground connection at the source should not be there.",
        "format": "markdown",
        "sha256": "4bfa6fc6405232a7d5cd831a61a1dc4fc05d07b978df5662809fc2d1b476925b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-grounded, so the input cannot modulate the transistor and the ideal small-signal gain is zero. The extra DC-bias discussion does not undermine the essential answer.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 4697,
        "total_tokens": 6434,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 4697,
        "total_tokens": 6434,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an NMOS, the circuit as drawn is **not a useful amplifier**, because the input capacitor \\(C_1\\) is connected to a node that is already hard-wired to ground.\n\n## 1. DC analysis\n\nAt DC, \\(C_1\\) is open, so \\(V_{in}\\) has no DC effect.\n\nThe MOSFET has\n\n\\[\nV_{GS}=V_b,\\qquad V_S=0\n\\]\n\nand the drain/output voltage is set by the load line\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}\n\\]\n\nIf \\(V_b<V_T\\), the NMOS is off:\n\n\\[\nI_D\\approx 0,\\qquad V_{out}\\approx V_{DD}\n\\]\n\nIf \\(V_b>V_T\\) and the device is in saturation,\n\n\\[\nI_D \\approx \\frac{1}{2}k_n(V_b-V_T)^2\n\\]\n\nignoring channel-length modulation, so\n\n\\[\nV_{out}=V_{DD}-I_D R_D\n\\]\n\nSaturation requires\n\n\\[\nV_{out}\\ge V_b-V_T\n\\]\n\nOtherwise the transistor is in triode.\n\n---\n\n## 2. Small-signal analysis as drawn\n\nFor small-signal analysis, \\(V_{DD}\\) and the ideal bias source \\(V_b\\) are AC grounds.\n\nBut the source of \\(M_1\\) is also directly connected to ground. Therefore\n\n\\[\nv_s=0\n\\]\n\nThe input capacitor simply connects \\(V_{in}\\) to ground:\n\n\\[\ni_{in}=sC_1 v_{in}\n\\]\n\nSo the input signal does not modulate \\(v_{GS}\\):\n\n\\[\nv_{gs}=v_g-v_s=0-0=0\n\\]\n\nHence the small-signal drain current due to \\(V_{in}\\) is zero, and therefore\n\n\\[\n\\boxed{\\frac{v_{out}}{v_{in}}=0}\n\\]\n\nSo, as drawn, the circuit has no signal gain from \\(V_{in}\\) to \\(V_{out}\\). The capacitor \\(C_1\\) merely loads the input source.\n\nThe small-signal output resistance is approximately\n\n\\[\nR_{out}=R_D\\parallel r_o\n\\]\n\nif the transistor is biased on.\n\n---\n\n## 3. If the intended circuit was a common-gate amplifier\n\nIf the direct source-to-ground connection were removed and the source were driven through \\(C_1\\), then the circuit would be a common-gate amplifier.\n\nIn that intended case, with the gate AC-grounded by \\(V_b\\),\n\n\\[\nA_v=\\frac{v_{out}}{v_s}\n\\approx +g_m(R_D\\parallel r_o)\n\\]\n\nor, if \\(r_o\\gg R_D\\),\n\n\\[\nA_v\\approx +g_mR_D\n\\]\n\nThe gain is non-inverting.\n\nThe input resistance looking into the source would be approximately\n\n\\[\nR_{in}\\approx \\frac{1}{g_m}\n\\]\n\nor with body effect,\n\n\\[\nR_{in}\\approx \\frac{1}{g_m+g_{mb}}\n\\]\n\nBut as drawn, because the source is shorted to ground, the actual gain from \\(V_{in}\\) is zero.",
        "format": "markdown",
        "sha256": "494420ae2e295d262072ffb185ef6ffcdc9d1fb4a202785b8b9f19e05db3672f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input cannot modulate the transistor and the ideal gain from Vin to Vout is zero. The additional common-gate discussion is explicitly hypothetical and does not alter the correct conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 9003,
        "total_tokens": 10740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 9003,
        "total_tokens": 10740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an NMOS and \\(R_D\\) is the drain load.\n\n## 1. Literal interpretation of the schematic\n\nAs drawn, the node on the right side of \\(C_1\\) is tied directly to ground. Therefore the input signal is coupled through \\(C_1\\) into an ideal ground node.\n\nSo, for small-signal operation,\n\n\\[\nv_s = 0\n\\]\n\nand since \\(V_b\\) is an ideal DC bias source, its small-signal value is also ground:\n\n\\[\nv_g = 0\n\\]\n\nThus,\n\n\\[\nv_{gs}=0\n\\]\n\nso the input signal produces no small-signal drain current change. Therefore,\n\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=0}\n\\]\n\nThe capacitor \\(C_1\\) simply presents an input impedance\n\n\\[\nZ_{in}=\\frac{1}{sC_1}\n\\]\n\nto ground. It does not drive the transistor.\n\nThe DC operating point is set only by \\(V_b\\), \\(V_{DD}\\), \\(R_D\\), and the MOSFET parameters:\n\n\\[\nI_D \\approx \\frac{1}{2}k_n\\left(V_b-V_T\\right)^2\n\\]\n\nif \\(M_1\\) is in saturation and channel-length modulation is ignored. Then\n\n\\[\nV_{out,Q}=V_{DD}-I_D R_D\n\\]\n\nwith saturation requiring\n\n\\[\nV_{out,Q} \\ge V_b - V_T\n\\]\n\nassuming the source is at ground.\n\n---\n\n## 2. If the intended circuit is a common-gate amplifier\n\nIf the ground at the input/source node is not meant to be a hard AC short, then the circuit is likely intended to be a common-gate NMOS amplifier. In that case, the source node is driven by \\(v_{in}\\) through \\(C_1\\), while the gate is biased at \\(V_b\\).\n\nAt midband, \\(C_1\\) is approximately a short, so \\(v_s \\approx v_{in}\\). The gate is AC-grounded, so\n\n\\[\nv_{gs}=-v_s\n\\]\n\nThe small-signal gain is non-inverting:\n\n\\[\n\\boxed{\nA_v \\approx +\\left(g_m+g_{mb}\\right)\\left(R_D \\parallel r_o\\right)\n}\n\\]\n\nwhere \\(g_{mb}\\) is the body-effect transconductance. If body effect is neglected,\n\n\\[\n\\boxed{\nA_v \\approx +g_m\\left(R_D \\parallel r_o\\right)\n}\n\\]\n\nThe input resistance looking into the source is approximately\n\n\\[\n\\boxed{\nR_{in}\\approx \\frac{1}{g_m+g_{mb}}\n}\n\\]\n\nand the output resistance is approximately\n\n\\[\n\\boxed{\nR_{out}\\approx R_D \\parallel r_o\n}\n\\]\n\nThe coupling capacitor \\(C_1\\) creates a high-pass response with lower cutoff approximately\n\n\\[\n\\boxed{\nf_L \\approx \\frac{1}{2\\pi C_1\\left(R_s+R_{in}\\right)}\n}\n\\]\n\nwhere \\(R_s\\) is the source resistance of \\(v_{in}\\).\n\n---\n\n### Key point\n\nAs literally drawn, the circuit has zero signal gain because the input is capacitively coupled to a grounded node. To function as an amplifier, that node must not be directly shorted to ground; it should be biased through a high impedance or current source instead.",
        "format": "markdown",
        "sha256": "c604d16951f62615a73dab458d6e5d0521c294ca84e35c04cd79cad03e18dd7c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the input/source node is hard-shorted to ground and concludes the ideal small-signal gain from Vin is zero. The hypothetical common-gate discussion does not undermine that central answer.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 11635,
        "total_tokens": 13372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 11635,
        "total_tokens": 13372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles** (in the usual small-signal sense).\n\nReason: with \\(V_{DD}\\) as AC ground and the source grounded, there are only **two independent dynamic nodes**:\n\n1. Gate node  \n2. Drain/output node\n\n\\(C_{GS}\\), \\(C_{GD}\\), and \\(C_{DB}\\) contribute to the dynamics of these two nodes. \\(C_{SB}\\) is connected from the source to ground, but the source is already at AC ground, so it does **not** create an additional pole.\n\nSo the circuit is a **second-order** network:\n\n\\[\n\\boxed{2\\text{ poles}}\n\\]\n\n\\(C_{GD}\\) may also introduce a zero, but it does not add a third pole.",
        "format": "markdown",
        "sha256": "cb76111ebfda2fbc438f5e74b3b50dcaac6029f75100218f4b0f8609e361573e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and explains that CSB is shorted out because the source is at AC ground; the remaining capacitors give two independent dynamics. This satisfies the full-credit rule.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 2237,
        "total_tokens": 4209,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 2237,
        "total_tokens": 4209,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\nReason: for small-signal analysis, \\(V_{DD}\\), source, and bulk are at AC ground. The only non-ground dynamic nodes are:\n\n1. Gate node  \n2. Drain/output node\n\nThe capacitors \\(C_{GS}\\), \\(C_{GD}\\), and \\(C_{DB}\\) connect between these two nodes and/or ground, so they create at most a **second-order** network. \\(C_{SB}\\) is effectively shorted because the source is grounded, so it does not add a pole.\n\n\\[\n\\boxed{\\text{Number of poles} = 2}\n\\]",
        "format": "markdown",
        "sha256": "c073e051150f4104fa95b2dbd520a4ee2331ea356b28a5d13aab782fb9078ec8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and notes that CSB is shorted out because its terminals are at AC ground, satisfying the full-credit rule.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 1692,
        "total_tokens": 3664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 1692,
        "total_tokens": 3664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\nReason: there are only **two independent dynamic nodes**:\n\n1. **Gate node** — with capacitances \\(C_{GS}\\) and \\(C_{GD}\\)\n2. **Drain/output node** — with capacitances \\(C_{DB}\\) and \\(C_{GD}\\)\n\nThe source and body are at AC ground, so \\(C_{SB}\\) does not introduce an additional independent pole.\n\nSo the small-signal transfer function is **second order**, giving:\n\n\\[\n\\boxed{2 \\text{ poles}}\n\\]",
        "format": "markdown",
        "sha256": "bf694c98c030d97609708c3f2707521bafce72c0f837008b4ce6e403758d6bb6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and explains that C_SB contributes none because its terminals are at AC ground.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 640,
        "total_tokens": 2612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 640,
        "total_tokens": 2612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an NMOS operating in saturation and do low-frequency analysis, neglecting capacitances.\n\nThis is a **common-gate amplifier with voltage feedback** from the drain/output to the gate through \\(R_1,R_2\\). The input is applied at the source.\n\n---\n\n## 1. Feedback voltage\n\nSince the MOS gate draws essentially no current,\n\n\\[\nV_F = V_G = \\beta V_{out}\n\\]\n\nwhere\n\n\\[\n\\beta=\\frac{R_2}{R_1+R_2}\n\\]\n\nSo the divider senses the output and feeds back a fraction of it to the gate.\n\n---\n\n## 2. Qualitative operation\n\nFor an NMOS common-gate stage:\n\n- If \\(V_{in}\\) rises, \\(V_{GS}\\) decreases.\n- Drain current decreases.\n- Voltage drop across \\(R_D\\) decreases.\n- Therefore \\(V_{out}\\) rises.\n\nSo the source-to-drain gain is **positive**.\n\nBut if \\(V_{out}\\) rises, the divider raises \\(V_G\\), which increases drain current and pulls \\(V_{out}\\) back down. Therefore the feedback is **negative feedback**.\n\n---\n\n## 3. Small-signal gain\n\nLet\n\n\\[\nR_F=R_1+R_2\n\\]\n\nThe divider also loads the output, so the small-signal output load is approximately\n\n\\[\nR_L = R_D \\parallel R_F\n\\]\n\nIgnoring \\(r_o\\) and body effect,\n\n\\[\nv_g = \\beta v_o\n\\]\n\nand for the transistor,\n\n\\[\ni_d = g_m(v_g-v_s)\n\\]\n\nAt the output node,\n\n\\[\n\\frac{v_o}{R_L}+g_m(v_g-v_s)=0\n\\]\n\nSubstitute \\(v_g=\\beta v_o\\) and \\(v_s=v_{in}\\):\n\n\\[\n\\frac{v_o}{R_L}+g_m(\\beta v_o-v_{in})=0\n\\]\n\n\\[\nv_o\\left(\\frac{1}{R_L}+\\beta g_m\\right)=g_m v_{in}\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_{in}}\n=\n\\frac{g_m R_L}{1+\\beta g_m R_L}\n}\n\\]\n\nwhere\n\n\\[\n\\beta=\\frac{R_2}{R_1+R_2}\n\\]\n\nIf \\(R_1+R_2 \\gg R_D\\), then \\(R_L\\approx R_D\\), giving\n\n\\[\n\\boxed{\nA_v \\approx \\frac{g_m R_D}{1+\\beta g_m R_D}\n}\n\\]\n\n---\n\n## 4. High loop-gain approximation\n\nIf\n\n\\[\n\\beta g_m R_L \\gg 1\n\\]\n\nthen\n\n\\[\nA_v \\approx \\frac{1}{\\beta}\n\\]\n\nso\n\n\\[\n\\boxed{\nA_v \\approx 1+\\frac{R_1}{R_2}\n}\n\\]\n\nThus the closed-loop gain is set mainly by the resistor ratio, similar to a non-inverting feedback amplifier.\n\n---\n\n## 5. More complete gain including \\(r_o\\)\n\nLet\n\n\\[\ng_o=\\frac{1}{r_o}\n\\]\n\nand define\n\n\\[\ng_L=\\frac{1}{R_D}+\\frac{1}{R_1+R_2}\n\\]\n\nIgnoring body effect,\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m+g_o}{g_L+g_o+\\beta g_m}\n}\n\\]\n\nIf body effect is included, with body at AC ground,\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m+g_{mb}+g_o}{g_L+g_o+\\beta g_m}\n}\n\\]\n\n---\n\n## 6. DC bias condition\n\nFor DC,\n\n\\[\nV_G=V_F=\\beta V_{out}\n\\]\n\nand the output-node current balance is\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\nI_D+\\frac{V_{out}}{R_1+R_2}\n\\]\n\nFor saturation, approximately,\n\n\\[\nI_D=\\frac{1}{2}k_n\\left(V_G-V_{in}-V_T\\right)^2\n\\]\n\nso\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\frac{1}{2}k_n\\left(\\beta V_{out}-V_{in}-V_T\\right)^2\n+\n\\frac{V_{out}}{R_1+R_2}\n\\]\n\nThe NMOS is on only if\n\n\\[\n\\beta V_{out}-V_{in}>V_T\n\\]\n\n---\n\n## 7. Summary\n\nThe circuit is a **feedback common-gate amplifier**.\n\n\\[\n\\boxed{\nV_F=\\frac{R_2}{R_1+R_2}V_{out}\n}\n\\]\n\n\\[\n\\boxed{\nA_v\\approx \\frac{g_m R_D}{1+\\left(\\frac{R_2}{R_1+R_2}\\right)g_m R_D}\n}\n\\]\n\nFor large loop gain,\n\n\\[\n\\boxed{\nA_v\\approx 1+\\frac{R_1}{R_2}\n}\n\\]\n\nSo the circuit behaves like a non-inverting voltage amplifier whose gain is set mainly by the feedback divider.",
        "format": "markdown",
        "sha256": "bc770942004cc549c41513ed82140fc6adec5d03e4251af3ca60bf2efccf19f0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain and high-loop-gain limit. The answer satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 10995,
        "total_tokens": 12594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 10995,
        "total_tokens": 12594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an NMOS biased in saturation and analyze the midband small-signal circuit. Let\n\n\\[\n\\beta=\\frac{R_2}{R_1+R_2}\n\\]\n\nso that, since the MOS gate draws essentially no current,\n\n\\[\nv_F=\\beta v_{out}.\n\\]\n\nThe divider also loads the output by \\(R_1+R_2\\), so define\n\n\\[\nR_L=R_D\\parallel (R_1+R_2)\n\\]\n\nor include any external load in parallel as well.\n\n## Small-signal gain\n\nIgnoring \\(r_o\\) and body effect first,\n\n\\[\ni_d=g_m v_{gs}=g_m(v_F-v_{in})=g_m(\\beta v_{out}-v_{in}).\n\\]\n\nKCL at the output gives\n\n\\[\n\\frac{v_{out}}{R_L}+g_m(\\beta v_{out}-v_{in})=0.\n\\]\n\nTherefore\n\n\\[\n\\boxed{\\frac{v_{out}}{v_{in}}=\\frac{g_m R_L}{1+\\beta g_m R_L}}\n\\]\n\nor\n\n\\[\n\\boxed{A_v=\\frac{g_m R_L}{1+g_mR_L\\frac{R_2}{R_1+R_2}}}.\n\\]\n\nIf \\(R_1+R_2\\gg R_D\\), then \\(R_L\\approx R_D\\).\n\nFor large loop gain,\n\n\\[\n\\beta g_mR_L\\gg 1\n\\]\n\nthe gain becomes\n\n\\[\n\\boxed{A_v\\approx \\frac{1}{\\beta}=1+\\frac{R_1}{R_2}}.\n\\]\n\nSo the circuit behaves like a non-inverting feedback amplifier whose closed-loop gain is set mainly by the resistor ratio.\n\n## Feedback interpretation\n\nA rise in \\(v_{out}\\) raises \\(v_F\\), which raises \\(v_{gs}\\), increasing drain current and pulling \\(v_{out}\\) back down through \\(R_D\\). Thus the feedback is negative.\n\nThe open-loop gain is approximately\n\n\\[\nA_0=g_mR_L\n\\]\n\nand the loop gain is\n\n\\[\nT=\\beta g_mR_L.\n\\]\n\nThus\n\n\\[\nA_v=\\frac{A_0}{1+T}.\n\\]\n\n## Input and output resistance\n\nWith \\(r_o\\to\\infty\\),\n\n\\[\n\\boxed{R_{in}\\approx \\frac{1}{g_m}+\\beta R_L}\n\\]\n\nso the feedback increases the input resistance compared with a simple common-gate stage.\n\nThe output resistance, with \\(v_{in}\\) set to ac ground, is\n\n\\[\n\\boxed{R_{out}\\approx R_L\\parallel \\frac{1}{\\beta g_m}}\n\\]\n\nor equivalently\n\n\\[\nR_{out}=\\frac{R_L}{1+\\beta g_mR_L}.\n\\]\n\n## More complete gain including \\(r_o\\) and body effect\n\nLet\n\n\\[\ng_o=\\frac{1}{r_o}, \\qquad G_L=\\frac{1}{R_D}+\\frac{1}{R_1+R_2}.\n\\]\n\nThen\n\n\\[\n\\boxed{\nA_v=\\frac{g_m+g_{mb}+g_o}{G_L+\\beta g_m+g_o}\n}\n\\]\n\nwhere \\(g_{mb}\\) is the body-effect transconductance. If body effect is ignored, set \\(g_{mb}=0\\).\n\n## DC bias condition\n\nAt dc,\n\n\\[\nV_F=\\beta V_{out}\n\\]\n\nand\n\n\\[\nV_{GS}=V_F-V_{in}=\\beta V_{out}-V_{in}.\n\\]\n\nThe output-node dc equation is\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\nI_D+\\frac{V_{out}}{R_1+R_2}.\n\\]\n\nFor saturation,\n\n\\[\nI_D\\approx \\frac{1}{2}k_n(V_{GS}-V_T)^2.\n\\]\n\nThe transistor is on only if\n\n\\[\n\\beta V_{out}-V_{in}>V_T.\n\\]\n\nThus the resistor divider provides negative feedback that biases the gate and sets the small-signal closed-loop gain.",
        "format": "markdown",
        "sha256": "0315706ce08158f5cca7525118ca8cc84ae80b5bfe59c8024f6e2268f6c1bed5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and gives the correct closed-loop gain. The additional analyses do not contradict the essential circuit model.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 11718,
        "total_tokens": 13317,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10799,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 11718,
        "total_tokens": 13317,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10799,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an nMOS transistor, the gate current is negligible, and all voltages are referenced to ground.\n\nLet\n\n\\[\nR_F=R_1+R_2,\\qquad \\beta=\\frac{R_2}{R_1+R_2}\n\\]\n\nThen the feedback voltage at the gate is\n\n\\[\nV_F=V_G=\\beta V_{out}\n\\]\n\nbecause the MOS gate draws essentially no dc current.\n\n---\n\n## 1. MOSFET terminal voltages\n\nThe source is driven by \\(V_{in}\\), the drain is \\(V_{out}\\), and the gate is \\(V_F\\). Thus\n\n\\[\nV_{GS}=V_G-V_S=\\beta V_{out}-V_{in}\n\\]\n\n\\[\nV_{DS}=V_D-V_S=V_{out}-V_{in}\n\\]\n\nThe transistor turns on when\n\n\\[\nV_{GS}>V_T\n\\]\n\nso\n\n\\[\n\\beta V_{out}-V_{in}>V_T\n\\]\n\nor\n\n\\[\nV_{in}<\\beta V_{out}-V_T\n\\]\n\n---\n\n## 2. DC output equation\n\nAt the output node,\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\nI_D+\\frac{V_{out}}{R_1+R_2}\n\\]\n\nThe current through \\(R_D\\) supplies both the MOSFET drain current and the feedback-divider current.\n\nIf \\(M_1\\) is off, then \\(I_D=0\\), so\n\n\\[\nV_{out}=V_{OH}\n=\nV_{DD}\\frac{R_1+R_2}{R_D+R_1+R_2}\n\\]\n\nIf \\(R_1+R_2\\gg R_D\\), then approximately\n\n\\[\nV_{OH}\\approx V_{DD}\n\\]\n\nThe off condition is\n\n\\[\n\\beta V_{OH}-V_{in}\\le V_T\n\\]\n\nor\n\n\\[\nV_{in}\\ge \\beta V_{OH}-V_T\n\\]\n\n---\n\n## 3. If the transistor is on\n\nWhen \\(M_1\\) is on, it is normally in saturation. Using the long-channel saturation model,\n\n\\[\nI_D=\\frac{1}{2}k_n\\left(\\beta V_{out}-V_{in}-V_T\\right)^2\n\\]\n\nneglecting channel-length modulation.\n\nTherefore the dc transfer characteristic is given implicitly by\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\frac{V_{out}}{R_1+R_2}\n+\n\\frac{1}{2}k_n\\left(\\beta V_{out}-V_{in}-V_T\\right)^2\n\\]\n\nIf channel-length modulation is included,\n\n\\[\nI_D=\n\\frac{1}{2}k_n\\left(\\beta V_{out}-V_{in}-V_T\\right)^2\n\\left(1+\\lambda\\left(V_{out}-V_{in}\\right)\\right)\n\\]\n\n---\n\n## 4. Small-signal gain\n\nFor small-signal operation around a bias point, define\n\n\\[\nv_f=\\beta v_{out}\n\\]\n\nIgnoring body effect for the moment, the small-signal drain current is\n\n\\[\ni_d=g_m(v_f-v_{in})+g_o(v_{out}-v_{in})\n\\]\n\nKCL at the output node gives\n\n\\[\n\\frac{v_{out}}{R_D}+\\frac{v_{out}}{R_1+R_2}\n+g_o(v_{out}-v_{in})\n+g_m(\\beta v_{out}-v_{in})=0\n\\]\n\nThus\n\n\\[\n\\boxed{\n\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m+g_o}\n{\\dfrac{1}{R_D}+\\dfrac{1}{R_1+R_2}+g_o+\\beta g_m}\n}\n\\]\n\nIf \\(r_o\\) is large, so \\(g_o\\approx 0\\), then\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx\n\\frac{g_m R_L}{1+\\beta g_m R_L}\n}\n\\]\n\nwhere\n\n\\[\nR_L=R_D\\parallel (R_1+R_2)\n\\]\n\nIf the feedback divider current is negligible, then \\(R_L\\approx R_D\\), so\n\n\\[\nA_v\\approx \\frac{g_m R_D}{1+\\beta g_m R_D}\n\\]\n\nFor large loop gain,\n\n\\[\n\\beta g_m R_L\\gg 1\n\\]\n\nthe gain becomes\n\n\\[\n\\boxed{\nA_v\\approx \\frac{1}{\\beta}\n=\n\\frac{R_1+R_2}{R_2}\n=\n1+\\frac{R_1}{R_2}\n}\n\\]\n\nSo the circuit behaves like a non-inverting amplifier whose closed-loop gain is set mainly by the resistor divider.\n\n---\n\n## 5. Feedback interpretation\n\nThe output is fed back to the MOSFET gate through \\(R_1\\) and \\(R_2\\). If \\(V_{out}\\) rises, \\(V_F\\) rises, increasing \\(V_{GS}\\). That increases \\(I_D\\), which pulls \\(V_{out}\\) downward. Therefore the feedback is negative feedback.\n\nThe circuit forces, approximately,\n\n\\[\nv_f\\approx v_{in}\n\\]\n\nso\n\n\\[\n\\beta v_{out}\\approx v_{in}\n\\]\n\nand therefore\n\n\\[\nv_{out}\\approx \\frac{v_{in}}{\\beta}\n\\]\n\nwhich gives the same gain result:\n\n\\[\nA_v\\approx 1+\\frac{R_1}{R_2}\n\\]\n\n---\n\n## 6. Output resistance\n\nWith \\(v_{in}=0\\), the small-signal output resistance is approximately\n\n\\[\n\\boxed{\nR_{out}\n=\n\\left(\n\\frac{1}{R_D}+\\frac{1}{R_1+R_2}+g_o+\\beta g_m\n\\right)^{-1}\n}\n\\]\n\nIf \\(g_o\\approx 0\\),\n\n\\[\nR_{out}\\approx\n\\frac{R_D\\parallel (R_1+R_2)}\n{1+\\beta g_m\\left(R_D\\parallel (R_1+R_2)\\right)}\n\\]\n\nSo the feedback lowers the output resistance.\n\n---\n\n### Summary\n\nThe circuit is a resistively loaded nMOS stage with output-to-gate negative feedback. Its key small-signal result is\n\n\\[\n\\boxed{\nA_v\\approx \\frac{g_m R_L}{1+\\beta g_m R_L}\n}\n\\]\n\nand for large loop gain,\n\n\\[\n\\boxed{\nA_v\\approx 1+\\frac{R_1}{R_2}\n}\n\\]\n\nThe output is non-inverting with respect to \\(V_{in}\\), and the feedback divider sets the closed-loop voltage gain.",
        "format": "markdown",
        "sha256": "e05290441498ac69fbb002ce942c163579b3091943020cf14856d29c85e2013e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven input, output-divider feedback to the gate, and negative feedback. The small-signal gain and large-loop-gain limit match the golden solution; secondary details do not undermine the core analysis.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 16014,
        "total_tokens": 17613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 16014,
        "total_tokens": 17613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming both transistors are NMOS devices, the circuit is an **NMOS source follower** biased by an NMOS current sink \\(M_2\\).\n\nLet \\(V_o=V_{out}\\), \\(V_i=V_{in}\\), and \\(\\beta_i=\\mu_n C_{ox}(W/L)_i\\).\n\n---\n\n## 1. DC operation\n\n\\(M_2\\) is biased by \\(V_b\\) and acts as a current source if it is in saturation:\n\n\\[\nV_b>V_{T2}\n\\]\n\n\\[\nV_o \\ge V_{OV2}=V_b-V_{T2}\n\\]\n\nIgnoring channel-length modulation,\n\n\\[\nI_D \\approx I_B=\\frac{1}{2}\\beta_2(V_b-V_{T2})^2\n\\]\n\nThe same current flows through \\(M_1\\). For \\(M_1\\),\n\n\\[\nV_{GS1}=V_i-V_o\n\\]\n\nso in saturation,\n\n\\[\nI_D=\\frac{1}{2}\\beta_1(V_i-V_o-V_{T1})^2\n\\]\n\nThus,\n\n\\[\nV_{OV1}=V_i-V_o-V_{T1}\n\\]\n\nand\n\n\\[\nV_o = V_i - V_{T1}-V_{OV1}\n\\]\n\nwhere\n\n\\[\nV_{OV1}=\\sqrt{\\frac{2I_B}{\\beta_1}}\n\\]\n\nTherefore,\n\n\\[\n\\boxed{V_{out}\\approx V_{in}-V_{GS1}}\n\\]\n\nor, substituting the bias current from \\(M_2\\),\n\n\\[\n\\boxed{V_{out}\\approx V_{in}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{T2})}\n\\]\n\nSo the output follows the input, but shifted downward by approximately one NMOS gate-source voltage.\n\n---\n\n## 2. Saturation/headroom conditions\n\nFor \\(M_2\\) to remain saturated:\n\n\\[\n\\boxed{V_{out}\\ge V_{OV2}}\n\\]\n\nFor \\(M_1\\) to remain saturated:\n\n\\[\nV_{DS1}\\ge V_{OV1}\n\\]\n\nSince\n\n\\[\nV_{DS1}=V_{DD}-V_{out}\n\\]\n\nwe need\n\n\\[\n\\boxed{V_{DD}-V_{out}\\ge V_{OV1}}\n\\]\n\nThus the useful output swing is approximately\n\n\\[\n\\boxed{V_{OV2}\\le V_{out}\\le V_{DD}-V_{OV1}}\n\\]\n\nIf \\(V_{in}\\) is limited to \\(V_{DD}\\), then the maximum output is more practically\n\n\\[\n\\boxed{V_{out,\\max}\\approx V_{DD}-V_{GS1}}\n\\]\n\nSo this circuit is not rail-to-rail.\n\n---\n\n## 3. Small-signal gain\n\nAt small signal, \\(V_{DD}\\) and \\(V_b\\) are AC grounds. The small-signal model gives\n\n\\[\n(g_{m1}+g_{mb1}+g_{o1}+g_{o2})v_o=g_{m1}v_i\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\n=\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}\n\\]\n\nEquivalently,\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_{m1}(r_{o1}\\parallel r_{o2})}\n{1+(g_{m1}+g_{mb1})(r_{o1}\\parallel r_{o2})}\n}\n\\]\n\nIf body effect and channel-length modulation are neglected,\n\n\\[\ng_{mb1}=0,\\qquad g_{o1},g_{o2}\\approx 0\n\\]\n\nso\n\n\\[\n\\boxed{A_v\\approx 1}\n\\]\n\nIn practice,\n\n\\[\nA_v<1\n\\]\n\nbecause of body effect and finite output resistance.\n\n---\n\n## 4. Input and output resistances\n\nThe MOS gate draws negligible DC current, so\n\n\\[\n\\boxed{R_{in}\\approx \\infty}\n\\]\n\nThe output resistance is found by grounding the input and applying a test voltage at the output:\n\n\\[\n\\boxed{\nR_{out}=\n\\frac{1}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}\n\\]\n\nIf \\(r_o\\) is large and body effect is small,\n\n\\[\n\\boxed{R_{out}\\approx \\frac{1}{g_{m1}}}\n\\]\n\nSo the circuit has high input resistance and low output resistance.\n\n---\n\n## Summary\n\nThe circuit is a **source follower buffer**:\n\n\\[\n\\boxed{V_{out}\\approx V_{in}-V_{GS1}}\n\\]\n\nIt is non-inverting, has voltage gain slightly less than unity, high input resistance, and low output resistance. \\(M_2\\) provides the bias current, while \\(M_1\\) performs the source-follower action.",
        "format": "markdown",
        "sha256": "7bbfc038a97eb3b72d83eace033a61a308c996f51d4ba6f1b0e6ec52f430d0f7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current-source load, and gives a positive gain slightly below unity with appropriate body-effect and finite-output-resistance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 10930,
        "total_tokens": 12154,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 10930,
        "total_tokens": 12154,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming both transistors are NMOS devices, the circuit is a **source follower**, or **common-drain amplifier**, with \\(M_2\\) acting as a biased current sink.\n\n## 1. DC operation\n\n\\(M_2\\) is biased by the fixed voltage \\(V_b\\). If\n\n\\[\nV_b > V_{T2}\n\\]\n\nthen \\(M_2\\) conducts and ideally sets a bias current\n\n\\[\nI_B \\approx \\frac{1}{2}\\beta_2 (V_b - V_{T2})^2\n\\]\n\nwhere\n\n\\[\n\\beta_2 = \\mu_n C_{ox}\\frac{W_2}{L_2}\n\\]\n\nprovided \\(M_2\\) remains in saturation.\n\nSince \\(M_1\\) and \\(M_2\\) are in series, their drain currents are equal:\n\n\\[\nI_{D1}=I_{D2}=I_B\n\\]\n\nFor \\(M_1\\),\n\n\\[\nV_{GS1}=V_{in}-V_{out}\n\\]\n\nso, neglecting channel-length modulation and body effect,\n\n\\[\nI_B = \\frac{1}{2}\\beta_1(V_{in}-V_{out}-V_{T1})^2\n\\]\n\nThus\n\n\\[\nV_{out} \\approx V_{in}-V_{T1}-V_{OV1}\n\\]\n\nwhere\n\n\\[\nV_{OV1}=\\sqrt{\\frac{2I_B}{\\beta_1}}\n\\]\n\nSo the output follows the input but is shifted down by roughly one gate-source voltage:\n\n\\[\nV_{out}\\approx V_{in}-V_{GS1}\n\\]\n\nThis is why the circuit is called a source follower.\n\n---\n\n## 2. Saturation conditions\n\nFor proper source-follower operation, both MOSFETs should remain in saturation.\n\nFor \\(M_2\\):\n\n\\[\nV_{DS2}=V_{out}\\ge V_{OV2}\n\\]\n\nso\n\n\\[\nV_{out}\\ge V_b - V_{T2}\n\\]\n\nFor \\(M_1\\):\n\n\\[\nV_{DS1}=V_{DD}-V_{out}\n\\]\n\nand saturation requires\n\n\\[\nV_{DD}-V_{out}\\ge V_{OV1}\n\\]\n\nTherefore the allowable output swing is approximately\n\n\\[\nV_{OV2} \\le V_{out} \\le V_{DD}-V_{OV1}\n\\]\n\nIn practice, if \\(V_{in}\\le V_{DD}\\), the maximum output is usually closer to\n\n\\[\nV_{out,max}\\approx V_{DD}-V_{GS1}\n\\]\n\nbecause the source cannot rise above the gate minus \\(V_{GS1}\\).\n\n---\n\n## 3. Small-signal gain\n\nFor small-signal analysis, \\(V_{DD}\\) and \\(V_b\\) are AC grounds. Let\n\n\\[\ng_{o1}=\\frac{1}{r_{o1}}, \\qquad g_{o2}=\\frac{1}{r_{o2}}\n\\]\n\nIncluding body effect of \\(M_1\\), the small-signal equation at the output node is\n\n\\[\n(g_{m1}+g_{mb1}+g_{o1}+g_{o2})v_{out}=g_{m1}v_{in}\n\\]\n\nThus the voltage gain is\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n\\]\n\nIf channel-length modulation and body effect are ignored,\n\n\\[\nA_v\\approx 1\n\\]\n\nWith body effect but large output resistances,\n\n\\[\nA_v\\approx \\frac{g_{m1}}{g_{m1}+g_{mb1}}<1\n\\]\n\nSo the stage is non-inverting and has a gain slightly less than unity.\n\n---\n\n## 4. Output resistance\n\nWith the input set to AC ground, the small-signal output resistance is\n\n\\[\nR_{out}=\n\\frac{1}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n\\]\n\nApproximately,\n\n\\[\nR_{out}\\approx \\frac{1}{g_{m1}+g_{mb1}}\n\\]\n\nso the circuit has low output resistance, making it useful as a voltage buffer.\n\n---\n\n## 5. Summary\n\nThis circuit is an NMOS source follower biased by a current-source transistor.\n\n\\[\n\\boxed{V_{out}\\approx V_{in}-V_{GS1}}\n\\]\n\n\\[\n\\boxed{A_v\\lesssim 1}\n\\]\n\n\\[\n\\boxed{R_{in}\\approx \\infty}\n\\]\n\n\\[\n\\boxed{R_{out}\\approx \\frac{1}{g_{m1}}}\n\\]\n\nIt provides high input impedance, low output impedance, and non-inverting voltage buffering, but the output is level-shifted downward by approximately one NMOS gate-source voltage.",
        "format": "markdown",
        "sha256": "042adc0f6c7319022549564d8f2ca8072aaf96bfbca3a13d9e1b963581649fb0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, with a positive gain slightly below unity. The gain expression and output-resistance analysis also match the expected small-signal behavior.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 10396,
        "total_tokens": 11620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 10396,
        "total_tokens": 11620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower**, also called a **common-drain amplifier**, biased by the lower NMOS \\(M_2\\) acting as a current sink.\n\nLet\n\n\\[\n\\beta_i=\\mu_n C_{ox}\\frac{W_i}{L_i}, \\qquad V_{OVi}=V_{GSi}-V_{Ti}\n\\]\n\nand assume long-channel devices unless stated otherwise.\n\n---\n\n## 1. DC operation\n\n- \\(M_1\\): drain at \\(V_{DD}\\), gate at \\(V_{in}\\), source at \\(V_{out}\\)\n- \\(M_2\\): drain at \\(V_{out}\\), gate at \\(V_b\\), source at ground\n\nIf \\(M_2\\) is biased in saturation,\n\n\\[\nV_b>V_{T2}\n\\]\n\nand\n\n\\[\nI_B \\approx \\frac{1}{2}\\beta_2(V_b-V_{T2})^2\n\\]\n\nSo \\(M_2\\) behaves like a current sink of value \\(I_B\\).\n\nFor \\(M_1\\), in normal source-follower operation,\n\n\\[\nI_D=I_B=\\frac{1}{2}\\beta_1(V_{in}-V_{out}-V_{T1})^2\n\\]\n\nThus\n\n\\[\nV_{out}\\approx V_{in}-V_{T1}-\\sqrt{\\frac{2I_B}{\\beta_1}}\n\\]\n\nor, substituting the bias current from \\(M_2\\),\n\n\\[\n\\boxed{\nV_{out}\\approx V_{in}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\left(V_b-V_{T2}\\right)\n}\n\\]\n\nSo the output follows the input but is shifted downward by roughly one NMOS \\(V_{GS}\\).\n\n---\n\n## 2. Saturation conditions\n\nFor \\(M_2\\) to remain in saturation,\n\n\\[\nV_{DS2}\\ge V_{OV2}\n\\]\n\nSince \\(V_{DS2}=V_{out}\\),\n\n\\[\n\\boxed{V_{out}\\ge V_b-V_{T2}}\n\\]\n\nFor \\(M_1\\),\n\n\\[\nV_{DS1}\\ge V_{OV1}\n\\]\n\n\\[\nV_{DD}-V_{out}\\ge V_{in}-V_{out}-V_{T1}\n\\]\n\nso\n\n\\[\n\\boxed{V_{in}\\le V_{DD}+V_{T1}}\n\\]\n\nThus, for normal input levels \\(0\\le V_{in}\\le V_{DD}\\), \\(M_1\\) is usually safely in saturation.\n\n---\n\n## 3. Output swing\n\nThe minimum useful output voltage is limited by keeping \\(M_2\\) in saturation:\n\n\\[\nV_{out,\\min}\\approx V_{OV2}=V_b-V_{T2}\n\\]\n\nThe maximum output voltage occurs when \\(V_{in}\\) is maximum. If \\(V_{in,\\max}=V_{DD}\\),\n\n\\[\nV_{out,\\max}\\approx V_{DD}-V_{GS1}\n\\]\n\nso the output cannot swing all the way to \\(V_{DD}\\). It is always lower than the input by approximately \\(V_{GS1}\\).\n\n---\n\n## 4. Small-signal voltage gain\n\nFor small-signal analysis, \\(V_{DD}\\) and \\(V_b\\) are AC grounds. The output node sees \\(r_{o1}\\), \\(r_{o2}\\), and the source-follower action of \\(M_1\\).\n\nIncluding body effect,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}\n\\]\n\nwhere\n\n\\[\ng_{oi}=\\frac{1}{r_{oi}}\n\\]\n\nIf channel-length modulation and body effect are neglected,\n\n\\[\nA_v\\approx 1\n\\]\n\nWith body effect included but \\(r_o\\to\\infty\\),\n\n\\[\nA_v\\approx \\frac{g_{m1}}{g_{m1}+g_{mb1}}<1\n\\]\n\nSo the stage is a non-inverting buffer with gain slightly less than unity.\n\n---\n\n## 5. Input and output resistance\n\nThe input is the MOS gate of \\(M_1\\), so ideally\n\n\\[\n\\boxed{R_{in}\\approx \\infty}\n\\]\n\nThe small-signal output resistance is\n\n\\[\n\\boxed{\nR_{out}\\approx\n\\frac{1}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}\n\\]\n\nIf body effect and finite output resistances are neglected,\n\n\\[\nR_{out}\\approx \\frac{1}{g_{m1}}\n\\]\n\nThus the circuit has low output resistance.\n\n---\n\n## 6. Summary\n\nThis is a biased NMOS source follower:\n\n\\[\n\\boxed{V_{out}\\approx V_{in}-V_{GS1}}\n\\]\n\nIt provides:\n\n- high input resistance,\n- low output resistance,\n- non-inverting gain slightly less than 1,\n- a DC level shift downward by approximately one \\(V_{GS}\\),\n- limited upper output swing: \\(V_{out,\\max}\\approx V_{DD}-V_{GS1}\\),\n- limited lower output swing if \\(M_2\\) must remain saturated: \\(V_{out,\\min}\\approx V_{OV2}\\).",
        "format": "markdown",
        "sha256": "e60134c2cf32f0d22f3014b254f06d8eff7a1c94bb4a7a8f7378f5855c583ca9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current sink, and gives a positive gain below unity. Its gain expression is equivalent to the golden expression; the additional analysis is consistent with the topology.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 9451,
        "total_tokens": 10675,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8279,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 9451,
        "total_tokens": 10675,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8279,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter**.\n\n- \\(M_1\\) is the **nMOS pull-down** transistor.\n- \\(M_2\\) is the **pMOS pull-up** transistor.\n- Their gates are tied together at \\(V_{in}\\).\n- Their drains are tied together at \\(V_{out}\\).\n- The pMOS source is connected to \\(V_{DD}\\), and the nMOS source is connected to ground.\n\n### Operation\n\n| \\(V_{in}\\) | \\(M_1\\) nMOS | \\(M_2\\) pMOS | \\(V_{out}\\) | Logic function |\n|---|---|---|---|---|\n| Low, \\(0\\) | OFF | ON | \\(V_{DD}\\) | Output HIGH |\n| High, \\(V_{DD}\\) | ON | OFF | \\(0\\) | Output LOW |\n\nSo the circuit implements\n\n\\[\nV_{out} = \\overline{V_{in}}\n\\]\n\nIt is an inverter/NOT gate.\n\n---\n\n### Case 1: \\(V_{in}=0\\)\n\nFor the nMOS,\n\n\\[\nV_{GS1}=0\n\\]\n\nso \\(M_1\\) is OFF.\n\nFor the pMOS,\n\n\\[\nV_{SG2}=V_{DD}\n\\]\n\nso \\(M_2\\) is ON and pulls the output node up to \\(V_{DD}\\).\n\nThus,\n\n\\[\nV_{out}=V_{DD}\n\\]\n\nIdeally there is no dc current from \\(V_{DD}\\) to ground.\n\n---\n\n### Case 2: \\(V_{in}=V_{DD}\\)\n\nFor the nMOS,\n\n\\[\nV_{GS1}=V_{DD}\n\\]\n\nso \\(M_1\\) is ON and pulls the output node down to ground.\n\nFor the pMOS,\n\n\\[\nV_{SG2}=0\n\\]\n\nso \\(M_2\\) is OFF.\n\nThus,\n\n\\[\nV_{out}=0\n\\]\n\nAgain, ideally there is no dc current in the steady state.\n\n---\n\n### Intermediate input voltage\n\nWhen\n\n\\[\nV_{TN} < V_{in} < V_{DD}-|V_{TP}|\n\\]\n\nboth transistors can conduct simultaneously. In this region, a current path exists from \\(V_{DD}\\) to ground, and the output switches from high to low.\n\nThe switching point \\(V_M\\), where approximately\n\n\\[\nV_{in}=V_{out}=V_M\n\\]\n\nis found by equating the nMOS and pMOS currents:\n\n\\[\nI_{Dn}=I_{Dp}\n\\]\n\nUsing the square-law model,\n\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{TP}|)^2\n\\]\n\nso\n\n\\[\nV_M=\n\\frac{\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)+\\sqrt{\\beta_n}V_{TN}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n\\]\n\nIf the inverter is designed symmetrically such that\n\n\\[\n\\beta_n \\approx \\beta_p\n\\]\n\nand\n\n\\[\nV_{TN}\\approx |V_{TP}|\n\\]\n\nthen\n\n\\[\nV_M \\approx \\frac{V_{DD}}{2}\n\\]\n\nwhich gives good noise margins.\n\n---\n\n### Main properties\n\n- Implements a NOT gate.\n- Output swings rail-to-rail: \\(0\\) to \\(V_{DD}\\).\n- Ideally zero static power dissipation except during switching.\n- High input impedance because the input is connected to MOS gates.\n- Dynamic power is mainly due to charging and discharging load capacitance:\n\n\\[\nP_{dyn}\\approx \\alpha C_L V_{DD}^2 f\n\\]\n\nwhere \\(\\alpha\\) is the switching activity factor.\n\nSo the circuit is a standard **static CMOS inverter** with\n\n\\[\nV_{out}=V_{DD} \\quad \\text{for} \\quad V_{in}=0\n\\]\n\nand\n\n\\[\nV_{out}=0 \\quad \\text{for} \\quad V_{in}=V_{DD}\n\\]",
        "format": "markdown",
        "sha256": "913841fa434a8e2ac7be0145c4422b0baa83bf887a1971192c728936d86694b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down, PMOS pull-up, connections, and logic-level operation. The additional analysis is consistent with the essential answer; the static-power statement is understood in the usual logic-level operating context.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3997,
        "total_tokens": 4277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3997,
        "total_tokens": 4277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an nMOS and \\(M_2\\) is a pMOS, the circuit is a **static CMOS inverter**.\n\n## 1. Basic operation\n\nBoth transistor gates are tied to \\(V_{in}\\), and both drains are tied to \\(V_{out}\\).\n\n| \\(V_{in}\\) | \\(M_1\\) nMOS | \\(M_2\\) pMOS | \\(V_{out}\\) |\n|---|---|---|---|\n| Low, \\(\\approx 0\\) | OFF | ON | High, \\(\\approx V_{DD}\\) |\n| High, \\(\\approx V_{DD}\\) | ON | OFF | Low, \\(\\approx 0\\) |\n\nSo the logic function is\n\n\\[\nV_{out}=\\overline{V_{in}}\n\\]\n\nIt is an inverter.\n\n---\n\n## 2. DC behavior\n\n### Case 1: \\(V_{in}=0\\)\n\nFor the nMOS,\n\n\\[\nV_{GS1}=0\n\\]\n\nso \\(M_1\\) is OFF.\n\nFor the pMOS,\n\n\\[\nV_{SG2}=V_{DD}\n\\]\n\nso \\(M_2\\) is ON and pulls the output up to \\(V_{DD}\\).\n\nThus,\n\n\\[\nV_{out}=V_{DD}\n\\]\n\n---\n\n### Case 2: \\(V_{in}=V_{DD}\\)\n\nFor the nMOS,\n\n\\[\nV_{GS1}=V_{DD}\n\\]\n\nso \\(M_1\\) is ON and pulls the output down to ground.\n\nFor the pMOS,\n\n\\[\nV_{SG2}=0\n\\]\n\nso \\(M_2\\) is OFF.\n\nThus,\n\n\\[\nV_{out}=0\n\\]\n\n---\n\n## 3. Voltage transfer characteristic\n\nThe inverter has a switching region where both transistors conduct simultaneously.\n\nFor low input voltage,\n\n\\[\nV_{in}<V_{TN}\n\\]\n\nthe nMOS is OFF and\n\n\\[\nV_{out}\\approx V_{DD}\n\\]\n\nFor high input voltage,\n\n\\[\nV_{in}>V_{DD}-|V_{TP}|\n\\]\n\nthe pMOS is OFF and\n\n\\[\nV_{out}\\approx 0\n\\]\n\nFor intermediate \\(V_{in}\\), both devices are ON and the output is determined by the condition\n\n\\[\nI_{Dn}=I_{Dp}\n\\]\n\nUsing the long-channel square-law model and neglecting channel-length modulation, the switching point \\(V_M\\) is approximately\n\n\\[\n\\sqrt{\\beta_n}\\left(V_M-V_{TN}\\right)\n=\n\\sqrt{\\beta_p}\\left(V_{DD}-V_M-|V_{TP}|\\right)\n\\]\n\nso\n\n\\[\nV_M=\n\\frac{\n\\sqrt{\\beta_p}\\left(V_{DD}-|V_{TP}|\\right)\n+\n\\sqrt{\\beta_n}V_{TN}\n}{\n\\sqrt{\\beta_n}+\\sqrt{\\beta_p}\n}\n\\]\n\nwhere\n\n\\[\n\\beta_n=\\mu_n C_{ox}\\frac{W_n}{L_n}\n\\]\n\nand\n\n\\[\n\\beta_p=\\mu_p C_{ox}\\frac{W_p}{L_p}\n\\]\n\nIf the inverter is symmetric, meaning\n\n\\[\n\\beta_n=\\beta_p\n\\]\n\nand\n\n\\[\nV_{TN}=|V_{TP}|\n\\]\n\nthen\n\n\\[\nV_M\\approx \\frac{V_{DD}}{2}\n\\]\n\nThis gives approximately equal noise margins.\n\n---\n\n## 4. Power consumption\n\nIdeally, in the two stable logic states there is no direct DC path from \\(V_{DD}\\) to ground.\n\nTherefore,\n\n\\[\nP_{static}\\approx 0\n\\]\n\nexcept for leakage current.\n\nPower is mainly consumed during switching, when the load capacitance is charged or discharged. The dynamic power is approximately\n\n\\[\nP_{dyn}=\\alpha C_L V_{DD}^2 f\n\\]\n\nwhere:\n\n- \\(\\alpha\\) is the switching activity factor,\n- \\(C_L\\) is the load capacitance,\n- \\(f\\) is the clock or switching frequency.\n\nThere is also short-circuit power during the brief interval when both transistors are ON.\n\n---\n\n## 5. Propagation delay\n\nWhen the output switches from high to low, \\(M_1\\) discharges the load capacitance.\n\n\\[\nt_{pHL}\\approx 0.69 R_n C_L\n\\]\n\nWhen the output switches from low to high, \\(M_2\\) charges the load capacitance.\n\n\\[\nt_{pLH}\\approx 0.69 R_p C_L\n\\]\n\nBecause hole mobility is lower than electron mobility, the pMOS is usually made wider than the nMOS so that\n\n\\[\n\\beta_p \\approx \\beta_n\n\\]\n\nThis makes the rise and fall delays more balanced.\n\n---\n\nSo the circuit is a **CMOS inverter** with rail-to-rail output swing, high input impedance, low static power dissipation, and an output logic level that is the complement of the input.",
        "format": "markdown",
        "sha256": "50f4e686a55cb05a3a25180b35076fbced719943b0273ba7af27e00be2c8a0bd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a CMOS inverter with an NMOS pull-down and PMOS pull-up and describes its operation accurately. The optional analysis does not contradict the inverter’s operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 6254,
        "total_tokens": 6534,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 6254,
        "total_tokens": 6534,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter**.\n\nAssume:\n\n- \\(M_1\\) is an **nMOS** transistor with source connected to ground.\n- \\(M_2\\) is a **pMOS** transistor with source connected to \\(V_{DD}\\).\n- Their gates are tied together at \\(V_{in}\\).\n- Their drains are tied together at \\(V_{out}\\).\n\n## Operation\n\n### 1. \\(V_{in}=0\\) logic LOW\n\nFor the nMOS:\n\n\\[\nV_{GS1}=0\n\\]\n\nso \\(M_1\\) is OFF.\n\nFor the pMOS:\n\n\\[\nV_{SG2}=V_{DD}\n\\]\n\nso \\(M_2\\) is ON.\n\nTherefore the output is pulled up to \\(V_{DD}\\):\n\n\\[\nV_{out}=V_{DD}\n\\]\n\nSo a LOW input gives a HIGH output.\n\n---\n\n### 2. \\(V_{in}=V_{DD}\\) logic HIGH\n\nFor the nMOS:\n\n\\[\nV_{GS1}=V_{DD}\n\\]\n\nso \\(M_1\\) is ON.\n\nFor the pMOS:\n\n\\[\nV_{SG2}=0\n\\]\n\nso \\(M_2\\) is OFF.\n\nTherefore the output is pulled down to ground:\n\n\\[\nV_{out}=0\n\\]\n\nSo a HIGH input gives a LOW output.\n\n---\n\n## Logic Function\n\n\\[\nV_{out}=\\overline{V_{in}}\n\\]\n\nTruth table:\n\n| \\(V_{in}\\) | \\(M_1\\) nMOS | \\(M_2\\) pMOS | \\(V_{out}\\) |\n|---|---|---|---|\n| 0 | OFF | ON | 1 |\n| 1 | ON | OFF | 0 |\n\nThus, the circuit implements a **NOT gate**, or inverter.\n\n---\n\n## Intermediate Input Voltages\n\nFor intermediate values of \\(V_{in}\\), both transistors may conduct simultaneously. This happens roughly when\n\n\\[\nV_{TN}<V_{in}<V_{DD}-|V_{TP}|\n\\]\n\nDuring this transition region, a current path exists from \\(V_{DD}\\) to ground through \\(M_2\\) and \\(M_1\\). The output switches sharply from HIGH to LOW.\n\nThe switching point \\(V_M\\) occurs when the pull-up current equals the pull-down current:\n\n\\[\nI_{Dn}=I_{Dp}\n\\]\n\nFor a long-channel approximation with both devices in saturation,\n\n\\[\nV_M=\n\\frac{\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)+\\sqrt{\\beta_n}V_{TN}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n\\]\n\nwhere\n\n\\[\n\\beta=\\mu C_{ox}\\frac{W}{L}\n\\]\n\nIf the inverter is sized so that \\(\\beta_n \\approx \\beta_p\\) and \\(V_{TN}\\approx |V_{TP}|\\), then\n\n\\[\nV_M \\approx \\frac{V_{DD}}{2}\n\\]\n\n---\n\n## Important Characteristics\n\n- Very high input resistance because MOS gates draw negligible DC current.\n- Rail-to-rail output swing: \\(0\\) to \\(V_{DD}\\).\n- Ideally zero static power dissipation in steady logic states.\n- Power is mainly consumed during switching due to charging/discharging load capacitance and short-circuit current during the transition.\n\nSo the circuit is a standard **CMOS inverter** with output equal to the logical complement of the input.",
        "format": "markdown",
        "sha256": "d6a0eeeebc90cd0a3c4916ae9511613de36904dde5a7fe9884a9deda72bc71db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and accurately describes its operation. The additional analysis is consistent with the circuit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 2815,
        "total_tokens": 3095,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 2815,
        "total_tokens": 3095,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the upper device \\(M_1\\) is a pMOS and the lower device \\(M_2\\) is an nMOS, the circuit is a **static CMOS inverter**.\n\n### 1. Basic operation\n\nBoth transistor gates are driven by \\(V_{in}\\), and the drains are tied together to form \\(V_{out}\\).\n\n| \\(V_{in}\\) | \\(M_1\\) pMOS | \\(M_2\\) nMOS | \\(V_{out}\\) |\n|---|---|---|---|\n| \\(0\\) | ON | OFF | \\(V_{DD}\\) |\n| \\(V_{DD}\\) | OFF | ON | \\(0\\) |\n\nSo the circuit implements\n\n\\[\nV_{out} = \\overline{V_{in}}\n\\]\n\ni.e. it is an inverter.\n\n---\n\n### 2. Device voltages\n\nFor the nMOS \\(M_2\\):\n\n\\[\nV_{GS,n}=V_{in}, \\qquad V_{DS,n}=V_{out}\n\\]\n\nFor the pMOS \\(M_1\\):\n\n\\[\nV_{SG,p}=V_{DD}-V_{in}, \\qquad V_{SD,p}=V_{DD}-V_{out}\n\\]\n\nThe nMOS turns on when\n\n\\[\nV_{in} > V_{TN}\n\\]\n\nThe pMOS turns on when\n\n\\[\nV_{DD}-V_{in} > |V_{TP}|\n\\]\n\n---\n\n### 3. DC voltage-transfer behavior\n\nFor low input:\n\n\\[\nV_{in} < V_{TN}\n\\]\n\nthe nMOS is OFF and the pMOS pulls the output up:\n\n\\[\nV_{out} \\approx V_{DD}\n\\]\n\nFor high input:\n\n\\[\nV_{in} > V_{DD}-|V_{TP}|\n\\]\n\nthe pMOS is OFF and the nMOS pulls the output down:\n\n\\[\nV_{out} \\approx 0\n\\]\n\nFor intermediate input values, both transistors conduct simultaneously and the output switches from high to low.\n\nThe switching point \\(V_M\\) occurs approximately when\n\n\\[\nV_{in}=V_{out}=V_M\n\\]\n\nand both transistors are in saturation. Equating the drain currents gives\n\n\\[\n\\frac{1}{2}\\beta_n\\left(V_M-V_{TN}\\right)^2\n=\n\\frac{1}{2}\\beta_p\\left(V_{DD}-V_M-|V_{TP}|\\right)^2\n\\]\n\nSolving,\n\n\\[\nV_M=\n\\frac{\\sqrt{\\beta_p}\\left(V_{DD}-|V_{TP}|\\right)+\\sqrt{\\beta_n}V_{TN}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n\\]\n\nwhere\n\n\\[\n\\beta_n=\\mu_n C_{ox}\\frac{W_n}{L_n}, \\qquad\n\\beta_p=\\mu_p C_{ox}\\frac{W_p}{L_p}\n\\]\n\nIf the inverter is sized so that\n\n\\[\n\\beta_n \\approx \\beta_p\n\\]\n\nand\n\n\\[\nV_{TN}\\approx |V_{TP}|\n\\]\n\nthen\n\n\\[\nV_M \\approx \\frac{V_{DD}}{2}\n\\]\n\nwhich gives a symmetric voltage-transfer characteristic.\n\n---\n\n### 4. Power behavior\n\nIdeally, in the two stable logic states there is no DC path from \\(V_{DD}\\) to ground:\n\n- input low: pMOS ON, nMOS OFF\n- input high: pMOS OFF, nMOS ON\n\nSo the static power is ideally\n\n\\[\nP_{static} \\approx 0\n\\]\n\nignoring leakage.\n\nPower is mainly consumed during switching, when the output capacitance is charged or discharged:\n\n\\[\nP_{dyn} \\approx \\alpha C_L V_{DD}^2 f\n\\]\n\nThere is also a short-circuit current during the transition because both transistors are briefly ON.\n\n---\n\n### 5. Small-signal gain near switching point\n\nAround the transition region, both devices conduct and the inverter behaves like a high-gain inverting amplifier. The small-signal gain is approximately\n\n\\[\nA_v \\approx -\\left(g_{mn}+g_{mp}\\right)\\left(r_{on}\\parallel r_{op}\\right)\n\\]\n\nor equivalently\n\n\\[\nA_v \\approx -\\frac{g_{mn}+g_{mp}}{g_{dsn}+g_{dsp}}\n\\]\n\nThe negative sign indicates inversion.\n\n---\n\nSo, under normal CMOS assumptions, the circuit is a **CMOS inverter** with rail-to-rail output, high input impedance, ideally zero static power, and high gain in the switching region.",
        "format": "markdown",
        "sha256": "0ebd873bcc7059c3c9735686fbb4765f4b566381e847884e38a294ef8a3f911c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper transistor as pMOS and analyzes the circuit as an ordinary CMOS inverter, contrary to the required topology identification.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 8246,
        "total_tokens": 8541,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 8246,
        "total_tokens": 8541,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is a pMOS transistor and \\(M_2\\) is an nMOS transistor, the circuit is a **CMOS inverter**.\n\n### 1. Circuit connections\n\n- Gates of \\(M_1\\) and \\(M_2\\) are tied together to \\(V_{in}\\).\n- Drains are tied together to form \\(V_{out}\\).\n- \\(M_1\\) is connected to \\(V_{DD}\\), acting as the pull-up device.\n- \\(M_2\\) is connected to ground, acting as the pull-down device.\n\n---\n\n## 2. Logic operation\n\n### Case 1: \\(V_{in}=0\\)\n\nFor the pMOS:\n\n\\[\nV_{SG1}=V_{DD}\n\\]\n\nSo \\(M_1\\) is ON.\n\nFor the nMOS:\n\n\\[\nV_{GS2}=0\n\\]\n\nSo \\(M_2\\) is OFF.\n\nTherefore, the output is pulled up to \\(V_{DD}\\):\n\n\\[\nV_{out}=V_{DD}\n\\]\n\nSo a logic 0 input gives a logic 1 output.\n\n---\n\n### Case 2: \\(V_{in}=V_{DD}\\)\n\nFor the pMOS:\n\n\\[\nV_{SG1}=0\n\\]\n\nSo \\(M_1\\) is OFF.\n\nFor the nMOS:\n\n\\[\nV_{GS2}=V_{DD}\n\\]\n\nSo \\(M_2\\) is ON.\n\nTherefore, the output is pulled down to ground:\n\n\\[\nV_{out}=0\n\\]\n\nSo a logic 1 input gives a logic 0 output.\n\n---\n\n## 3. Truth table\n\n\\[\n\\begin{array}{c|c}\nV_{in} & V_{out} \\\\\n\\hline\n0 & V_{DD} \\\\\nV_{DD} & 0\n\\end{array}\n\\]\n\nThus, the circuit performs inversion.\n\n\\[\nV_{out}=\\overline{V_{in}}\n\\]\n\n---\n\n## 4. Operation during switching\n\nFor intermediate values of \\(V_{in}\\), both transistors can conduct simultaneously. In this region, there is a direct current path from \\(V_{DD}\\) to ground through \\(M_1\\) and \\(M_2\\). The output voltage switches sharply from high to low.\n\nThe switching point \\(V_M\\) is approximately found by equating the pMOS and nMOS drain currents. Neglecting channel-length modulation,\n\n\\[\n\\frac{1}{2}\\beta_n(V_M-V_{TN})^2\n=\n\\frac{1}{2}\\beta_p(V_{DD}-V_M-|V_{TP}|)^2\n\\]\n\nso\n\n\\[\nV_M=\n\\frac{V_{TN}+\\sqrt{\\beta_p/\\beta_n}(V_{DD}-|V_{TP}|)}\n{1+\\sqrt{\\beta_p/\\beta_n}}\n\\]\n\nIf the devices are sized so that\n\n\\[\n\\beta_n \\approx \\beta_p\n\\]\n\nand if\n\n\\[\nV_{TN}\\approx |V_{TP}|\n\\]\n\nthen\n\n\\[\nV_M \\approx \\frac{V_{DD}}{2}\n\\]\n\nwhich gives a symmetric voltage transfer characteristic.\n\n---\n\n## 5. Important features\n\n- The circuit is a **CMOS inverter**.\n- Ideally, it has **zero static power dissipation** in the logic-0 and logic-1 states.\n- It has full rail-to-rail output swing:\n\n\\[\nV_{OH}=V_{DD}, \\qquad V_{OL}=0\n\\]\n\n- Power is mainly consumed during switching due to charging and discharging load capacitance.\n- The output is the logical complement of the input.",
        "format": "markdown",
        "sha256": "95d592932a6e9f0959781c2597da29f4235679df991dd829983c67ddfe540215"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as a pMOS and analyzes the circuit as an ordinary CMOS inverter. The golden solution requires identifying both devices as NMOS; this error triggers the explicit zero-score rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3894,
        "total_tokens": 4189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3894,
        "total_tokens": 4189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the upper device \\(M_1\\) is a pMOS and the lower device \\(M_2\\) is an nMOS, the circuit is a **CMOS inverter**.\n\n## 1. Basic operation\n\nBoth gates are connected to \\(V_{in}\\), and the drains are tied together at \\(V_{out}\\).\n\n| \\(V_{in}\\) | \\(M_1\\) pMOS | \\(M_2\\) nMOS | \\(V_{out}\\) |\n|---|---|---|---|\n| Low, \\(0\\) | ON | OFF | High, \\(\\approx V_{DD}\\) |\n| High, \\(V_{DD}\\) | OFF | ON | Low, \\(\\approx 0\\) |\n\nSo the logic function is\n\n\\[\nV_{out} = \\overline{V_{in}}\n\\]\n\nIt is an inverter.\n\n---\n\n## 2. DC behavior\n\n### For \\(V_{in}=0\\)\n\n- pMOS gate-source voltage is large enough to turn \\(M_1\\) ON.\n- nMOS gate-source voltage is zero, so \\(M_2\\) is OFF.\n- Output is pulled up to \\(V_{DD}\\).\n\n\\[\nV_{out} \\approx V_{DD}\n\\]\n\n### For \\(V_{in}=V_{DD}\\)\n\n- pMOS is OFF.\n- nMOS is ON.\n- Output is pulled down to ground.\n\n\\[\nV_{out} \\approx 0\n\\]\n\n### For intermediate \\(V_{in}\\)\n\nBoth transistors may conduct simultaneously, creating a current path from \\(V_{DD}\\) to ground. In this region, the output voltage is determined by equating the pMOS and nMOS drain currents:\n\n\\[\nI_{Dn}=I_{Dp}\n\\]\n\nThis gives the inverter voltage-transfer characteristic.\n\n---\n\n## 3. Switching threshold\n\nUsing the long-channel square-law model and ignoring channel-length modulation,\n\n\\[\n\\beta_n(V_M - V_{TN})^2\n=\n\\beta_p(V_{DD}-V_M-|V_{TP}|)^2\n\\]\n\nwhere \\(V_M\\) is the switching threshold.\n\nSolving,\n\n\\[\nV_M=\n\\frac{V_{TN}+\\sqrt{\\beta_p/\\beta_n}(V_{DD}-|V_{TP}|)}\n{1+\\sqrt{\\beta_p/\\beta_n}}\n\\]\n\nIf the inverter is symmetric, meaning\n\n\\[\n\\beta_n \\approx \\beta_p\n\\]\n\nand\n\n\\[\nV_{TN}\\approx |V_{TP}|,\n\\]\n\nthen\n\n\\[\nV_M \\approx \\frac{V_{DD}}{2}\n\\]\n\nwhich is usually desired for maximum noise margin.\n\n---\n\n## 4. Power behavior\n\nFor ideal CMOS:\n\n- Static power is nearly zero when \\(V_{in}=0\\) or \\(V_{in}=V_{DD}\\), because one transistor is OFF.\n- During switching, both transistors conduct briefly, causing short-circuit current.\n- Dynamic power is mainly due to charging and discharging the load capacitance:\n\n\\[\nP_{dyn} \\approx \\alpha C_L V_{DD}^2 f\n\\]\n\nwhere \\(\\alpha\\) is the switching activity factor.\n\n---\n\n## 5. Small-signal view\n\nIf biased near the switching point, both MOSFETs can be in saturation and the circuit behaves like a high-gain inverting amplifier. The small-signal voltage gain is approximately\n\n\\[\nA_v \\approx -\\frac{g_{mn}+g_{mp}}{g_{dsn}+g_{dsp}}\n\\]\n\nThe negative sign shows that the output is inverted relative to the input.\n\n---\n\nTherefore, the circuit is a CMOS inverter with rail-to-rail output swing, ideally zero static power in the logic states, and high gain around its switching point.",
        "format": "markdown",
        "sha256": "95800713df5d2308a54701df338b0d6be164392984d0ea5aafb3cb1aea2aeda2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as pMOS and analyzes the circuit as a conventional CMOS inverter. The figure has two NMOS devices; this topology error requires a score of 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 8059,
        "total_tokens": 8354,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 8059,
        "total_tokens": 8354,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS common-source inverter/amplifier with a diode-connected PMOS load**.\n\nLet\n\n\\[\nV_o=V_{out},\\quad V_i=V_{in},\\quad V_P=|V_{TP}|\n\\]\n\nand define\n\n\\[\n\\beta_n=\\mu_n C_{ox}(W/L)_1,\\qquad\n\\beta_p=\\mu_p C_{ox}(W/L)_2\n\\]\n\nassuming long-channel square-law MOSFETs and neglecting channel-length modulation.\n\n---\n\n## 1. Operation of \\(M_2\\)\n\nFor the PMOS \\(M_2\\),\n\n\\[\nV_{SG2}=V_{DD}-V_o\n\\]\n\nand since its gate and drain are tied together,\n\n\\[\nV_{SD2}=V_{DD}-V_o\n\\]\n\nSo whenever \\(M_2\\) is ON,\n\n\\[\nV_{SD2}=V_{SG2}\\ge V_{SG2}-|V_{TP}|\n\\]\n\ntherefore \\(M_2\\) is always in saturation when conducting.\n\nIt turns on when\n\n\\[\nV_{SG2}>|V_{TP}|\n\\]\n\nso\n\n\\[\nV_o < V_{DD}-|V_{TP}|\n\\]\n\nThus the output high level is approximately\n\n\\[\nV_{OH}\\approx V_{DD}-|V_{TP}|\n\\]\n\nnot \\(V_{DD}\\). This is a degraded logic high.\n\n---\n\n## 2. DC transfer characteristic\n\nThe current through \\(M_1\\) equals the current through \\(M_2\\).\n\nDefine\n\n\\[\nA=V_{DD}-|V_{TP}|,\\qquad m=\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n\\]\n\n---\n\n### Region 1: \\(M_1\\) OFF\n\nIf\n\n\\[\nV_i<V_{TN}\n\\]\n\nthen \\(M_1\\) is OFF, so ideally\n\n\\[\nI_D=0\n\\]\n\nand the output charges high:\n\n\\[\nV_o\\approx V_{DD}-|V_{TP}|=A\n\\]\n\n---\n\n### Region 2: \\(M_1\\) saturation, \\(M_2\\) saturation\n\nFor\n\n\\[\nV_i>V_{TN}\n\\]\n\nand\n\n\\[\nV_o\\ge V_i-V_{TN}\n\\]\n\n\\(M_1\\) is in saturation.\n\nThe currents are\n\n\\[\nI_{D1}=\\frac{1}{2}\\beta_n(V_i-V_{TN})^2\n\\]\n\n\\[\nI_{D2}=\\frac{1}{2}\\beta_p(V_{DD}-V_o-|V_{TP}|)^2\n\\]\n\nEquating currents:\n\n\\[\n\\frac{1}{2}\\beta_n(V_i-V_{TN})^2\n=\n\\frac{1}{2}\\beta_p(A-V_o)^2\n\\]\n\nso\n\n\\[\nV_o=A-m(V_i-V_{TN})\n\\]\n\nTherefore in this region the voltage transfer curve is linear:\n\n\\[\n\\boxed{V_o=V_{DD}-|V_{TP}|-\\sqrt{\\frac{\\beta_n}{\\beta_p}}(V_i-V_{TN})}\n\\]\n\nThe slope is\n\n\\[\n\\frac{dV_o}{dV_i}=-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n\\]\n\n---\n\n### Boundary where \\(M_1\\) leaves saturation\n\nThe boundary occurs when\n\n\\[\nV_o=V_i-V_{TN}\n\\]\n\nUsing the saturation-region result:\n\n\\[\nV_i-V_{TN}=\\frac{A}{1+m}\n\\]\n\nso\n\n\\[\n\\boxed{V_{iB}=V_{TN}+\\frac{V_{DD}-|V_{TP}|}{1+\\sqrt{\\beta_n/\\beta_p}}}\n\\]\n\nand\n\n\\[\n\\boxed{V_{oB}=\\frac{V_{DD}-|V_{TP}|}{1+\\sqrt{\\beta_n/\\beta_p}}}\n\\]\n\n---\n\n### Region 3: \\(M_1\\) triode, \\(M_2\\) saturation\n\nFor larger \\(V_i\\), \\(M_1\\) enters the triode region. Then\n\n\\[\nI_{D1}=\\beta_n\\left[(V_i-V_{TN})V_o-\\frac{V_o^2}{2}\\right]\n\\]\n\nwhile\n\n\\[\nI_{D2}=\\frac{1}{2}\\beta_p(A-V_o)^2\n\\]\n\nEquating currents gives\n\n\\[\n\\beta_n\\left[(V_i-V_{TN})V_o-\\frac{V_o^2}{2}\\right]\n=\n\\frac{1}{2}\\beta_p(A-V_o)^2\n\\]\n\nSolving for \\(V_o\\):\n\n\\[\n\\boxed{\nV_o=\n\\frac{\nA+\\frac{\\beta_n}{\\beta_p}(V_i-V_{TN})\n-\n\\sqrt{\n\\left[A+\\frac{\\beta_n}{\\beta_p}(V_i-V_{TN})\\right]^2\n-\n\\left(1+\\frac{\\beta_n}{\\beta_p}\\right)A^2\n}\n}{\n1+\\frac{\\beta_n}{\\beta_p}\n}\n}\n\\]\n\nThis region gives the low output voltage.\n\nAt \\(V_i=V_{DD}\\), this gives \\(V_{OL}\\), which is not exactly zero because \\(M_2\\) still sources current.\n\n---\n\n## 3. Small-signal gain\n\nAround a bias point where \\(M_1\\) is saturated, \\(M_2\\) behaves like a diode-connected PMOS load with small-signal resistance approximately\n\n\\[\nr_L\\approx \\frac{1}{g_{m2}}\n\\]\n\nMore accurately,\n\n\\[\nr_L=\\frac{1}{g_{m2}+g_{ds2}}\n\\]\n\nThe small-signal voltage gain is\n\n\\[\nA_v=\\frac{v_o}{v_i}\n\\]\n\n\\[\n\\boxed{\nA_v=-\\frac{g_{m1}}{g_{m2}+g_{ds1}+g_{ds2}}\n}\n\\]\n\nIf channel-length modulation is neglected,\n\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_{m1}}{g_{m2}}\n}\n\\]\n\nSince both devices carry the same bias current,\n\n\\[\ng_{m1}=\\sqrt{2\\beta_n I_D},\\qquad\ng_{m2}=\\sqrt{2\\beta_p I_D}\n\\]\n\nso\n\n\\[\n\\boxed{\nA_v\\approx-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n}\n\\]\n\n---\n\n## 4. Key observations\n\n- The circuit behaves as an **inverter**: increasing \\(V_{in}\\) pulls \\(V_{out}\\) down.\n- \\(M_2\\) is a **diode-connected PMOS load**.\n- \\(M_2\\) is always saturated when ON.\n- The high output level is degraded:\n\n\\[\nV_{OH}\\approx V_{DD}-|V_{TP}|\n\\]\n\n- The low output level is nonzero because \\(M_2\\) continues to conduct.\n- There is static power dissipation whenever \\(M_1\\) and \\(M_2\\) are both ON:\n\n\\[\nP_{static}=V_{DD}I_D\n\\]\n\nSo this is a ratioed, non-rail-to-rail inverter/amplifier rather than a full CMOS inverter.",
        "format": "markdown",
        "sha256": "083fb7dcf111f53736b8d1b72ec18ba5faecb95ff1249587b41d9d53d2cce8ed"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS with diode-connected PMOS load and gives the inverting gain, including a channel-length-modulation form equivalent to the golden solution. The additional large-signal analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 10897,
        "total_tokens": 11617,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 10897,
        "total_tokens": 11617,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-source NMOS stage with a diode-connected PMOS load**. It behaves as a **ratioed inverter**: increasing \\(V_{in}\\) pulls \\(V_{out}\\) down.\n\nAssume long-channel square-law MOSFETs, no channel-length modulation/body effect. Let\n\n\\[\n\\beta_n=\\mu_n C_{ox}(W/L)_1,\\qquad \\beta_p=\\mu_p C_{ox}(W/L)_2\n\\]\n\n\\[\nV_{TN}>0,\\qquad V_{Tp}=|V_{TP}|,\\qquad B=V_{DD}-V_{Tp}\n\\]\n\nFor \\(M_2\\),\n\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{out}\n\\]\n\nso when \\(M_2\\) is on, it is always in saturation because\n\n\\[\nV_{SD2}\\ge V_{SG2}-V_{Tp}\n\\]\n\nis automatically satisfied.\n\n---\n\n## 1. \\(V_{in}<V_{TN}\\): \\(M_1\\) off\n\nThe NMOS \\(M_1\\) is off. Ideally there is no dc path to ground. The diode-connected PMOS charges the output high until it nearly turns off:\n\n\\[\nV_{OH}\\approx V_{DD}-V_{Tp}\n\\]\n\nSo the high output is a degraded high level, not a full \\(V_{DD}\\), under the ideal square-law model.\n\n---\n\n## 2. \\(V_{in}>V_{TN}\\): both devices conduct\n\nThe drain current of \\(M_1\\) must equal the current supplied by \\(M_2\\).\n\nFor \\(M_2\\),\n\n\\[\nI_{D2}=\\frac{\\beta_p}{2}(V_{DD}-V_{out}-V_{Tp})^2\n\\]\n\nFor \\(M_1\\),\n\n\\[\nV_{GS1}=V_{in},\\qquad V_{DS1}=V_{out}\n\\]\n\n---\n\n## 3. Region where \\(M_1\\) is saturated\n\n\\(M_1\\) is saturated if\n\n\\[\nV_{out}\\ge V_{in}-V_{TN}\n\\]\n\nThen\n\n\\[\nI_{D1}=\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n\\]\n\nEquating currents:\n\n\\[\n\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{out}-V_{Tp})^2\n\\]\n\nThus\n\n\\[\nV_{out}\n=\nV_{DD}-V_{Tp}\n-\n\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,(V_{in}-V_{TN})\n\\]\n\nSo in this region the voltage transfer characteristic is approximately linear with slope\n\n\\[\n\\frac{dV_{out}}{dV_{in}}\n=\n-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n\\]\n\nThis region is valid while\n\n\\[\nV_{out}\\ge V_{in}-V_{TN}\n\\]\n\nwhich gives\n\n\\[\nV_{in}\\le V_{TN}+\\frac{V_{DD}-V_{Tp}}{1+\\sqrt{\\beta_n/\\beta_p}}\n\\]\n\n---\n\n## 4. Region where \\(M_1\\) is in triode\n\nFor larger \\(V_{in}\\), \\(M_1\\) enters triode:\n\n\\[\nV_{out}<V_{in}-V_{TN}\n\\]\n\nThen\n\n\\[\nI_{D1}\n=\n\\beta_n\\left[(V_{in}-V_{TN})V_{out}-\\frac{V_{out}^2}{2}\\right]\n\\]\n\nEquating with the PMOS current:\n\n\\[\n\\beta_n\\left[(V_{in}-V_{TN})V_{out}-\\frac{V_{out}^2}{2}\\right]\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{out}-V_{Tp})^2\n\\]\n\nThis equation determines \\(V_{out}\\) for high \\(V_{in}\\). In general, \\(V_{OL}\\) is not exactly zero; it depends on the strength ratio \\(\\beta_n/\\beta_p\\).\n\nFor \\(V_{in}=V_{DD}\\), \\(V_{OL}\\) is found from the above equation.\n\n---\n\n## Switching point\n\nThe switching point \\(V_M\\) occurs when\n\n\\[\nV_{out}=V_{in}=V_M\n\\]\n\nAt that point \\(M_1\\) is saturated, so\n\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-V_{Tp})^2\n\\]\n\nSolving,\n\n\\[\nV_M\n=\n\\frac{V_{DD}-V_{Tp}+\\sqrt{\\beta_n/\\beta_p}\\,V_{TN}}\n{1+\\sqrt{\\beta_n/\\beta_p}}\n\\]\n\n---\n\n## Small-signal gain\n\nIf biased in the saturation region, this is a common-source amplifier with a diode-connected PMOS load.\n\nIgnoring \\(r_o\\),\n\n\\[\nA_v\n\\approx\n-\\frac{g_{m1}}{g_{m2}}\n\\]\n\nSince both devices carry the same bias current,\n\n\\[\nA_v\n\\approx\n-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n\\]\n\nIncluding output resistances,\n\n\\[\nA_v\n\\approx\n-\\frac{g_{m1}}{g_{m2}+g_{ds1}+g_{ds2}}\n\\]\n\n---\n\n## Summary\n\n- \\(M_2\\) is a diode-connected PMOS load.\n- The circuit is an inverting stage.\n- \\(M_2\\) is always saturated when on.\n- For low \\(V_{in}\\), \\(M_1\\) is off and\n\n\\[\nV_{out}\\approx V_{DD}-|V_{TP}|\n\\]\n\n- For high \\(V_{in}\\), \\(M_1\\) pulls the output low, but \\(V_{OL}\\neq 0\\) in general.\n- The circuit consumes static power when \\(V_{in}\\) is high because both transistors conduct.\n- The small-signal voltage gain is approximately\n\n\\[\nA_v\\approx -\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n\\]\n\nif both devices operate in saturation.",
        "format": "markdown",
        "sha256": "86a712117b7fdec0b910da45ad20a60dd2aefead3da8e647a1bdba671556c02a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including a consistent channel-length-modulation form. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 10687,
        "total_tokens": 11407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 10687,
        "total_tokens": 11407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS common-source stage / inverter** with a **diode-connected PMOS load** \\(M_2\\). The gate and drain of \\(M_2\\) are tied to \\(V_{out}\\).\n\nAssume long-channel MOSFETs, no channel-length modulation, no body effect, and no external load.\n\nLet\n\n\\[\nV_n=V_{TN},\\qquad V_p=|V_{TP}|,\\qquad \n\\beta_n=\\mu_n C_{ox}(W/L)_1,\\qquad \n\\beta_p=\\mu_p C_{ox}(W/L)_2\n\\]\n\nand define\n\n\\[\nB=V_{DD}-V_p,\\qquad r=\\frac{\\beta_n}{\\beta_p},\\qquad m=\\sqrt r\n\\]\n\n---\n\n## 1. Operation of \\(M_2\\)\n\nFor the PMOS load,\n\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{out}\n\\]\n\nSo when \\(M_2\\) is on, it is always in saturation because it is diode-connected.\n\nIt turns on when\n\n\\[\nV_{DD}-V_{out}>V_p\n\\]\n\nor\n\n\\[\nV_{out}<V_{DD}-V_p=B\n\\]\n\nThus the pull-up can only actively charge the output up to approximately\n\n\\[\nV_{OH}\\approx V_{DD}-|V_{TP}|\n\\]\n\nnot all the way to \\(V_{DD}\\) in the ideal square-law model.\n\n---\n\n## 2. DC transfer characteristic\n\n### Case 1: \\(V_{in}\\le V_{TN}\\)\n\n\\(M_1\\) is off. The output is pulled high by \\(M_2\\) until \\(M_2\\) turns off:\n\n\\[\nV_{out}\\approx V_{DD}-|V_{TP}|\n\\]\n\nThere is ideally no static current.\n\n---\n\n### Case 2: \\(V_{in}>V_{TN}\\), \\(M_1\\) saturated\n\nFor \\(M_1\\),\n\n\\[\nI_{D1}=\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n\\]\n\nFor \\(M_2\\),\n\n\\[\nI_{D2}=\\frac{\\beta_p}{2}(V_{DD}-V_{out}-|V_{TP}|)^2\n\\]\n\nEquating currents gives\n\n\\[\nV_{out}=V_{DD}-|V_{TP}|-\\sqrt{\\frac{\\beta_n}{\\beta_p}}(V_{in}-V_{TN})\n\\]\n\nor\n\n\\[\nV_{out}=B-m(V_{in}-V_n)\n\\]\n\nThis region is valid as long as\n\n\\[\nV_{out}\\ge V_{in}-V_{TN}\n\\]\n\nwhich gives\n\n\\[\nV_{in}\\le V_{TN}+\\frac{B}{1+m}\n\\]\n\n---\n\n### Case 3: \\(M_1\\) in triode region\n\nFor larger \\(V_{in}\\), \\(M_1\\) enters triode. Then\n\n\\[\nI_{D1}=\\beta_n\\left[(V_{in}-V_{TN})V_{out}-\\frac{V_{out}^2}{2}\\right]\n\\]\n\nand\n\n\\[\nI_{D2}=\\frac{\\beta_p}{2}(B-V_{out})^2\n\\]\n\nSolving,\n\n\\[\nV_{out}=\n\\frac{\nr(V_{in}-V_n)+B\n-\n\\sqrt{\\left[r(V_{in}-V_n)+B\\right]^2-(r+1)B^2}\n}{r+1}\n\\]\n\nThe smaller root is chosen because the output is low in this region.\n\nAt \\(V_{in}=V_{DD}\\), this gives the low output level \\(V_{OL}\\). It is not exactly zero unless \\(M_1\\) is much stronger than \\(M_2\\).\n\n---\n\n## 3. Switching point\n\nThe point where\n\n\\[\nV_{out}=V_{in}=V_M\n\\]\n\nis approximately\n\n\\[\nV_M=\n\\frac{B+mV_{TN}}{1+m}\n=\n\\frac{V_{DD}-|V_{TP}|+\\sqrt{\\beta_n/\\beta_p}\\,V_{TN}}\n{1+\\sqrt{\\beta_n/\\beta_p}}\n\\]\n\n---\n\n## 4. Small-signal gain\n\nIf used as an analog common-source amplifier and both transistors are biased in saturation, the diode-connected PMOS load behaves like a small-signal resistance of roughly\n\n\\[\n\\frac{1}{g_{m2}+g_{o2}}\n\\]\n\nIncluding \\(M_1\\)’s output resistance,\n\n\\[\nA_v \\approx -\\frac{g_{m1}}{g_{m2}+g_{o1}+g_{o2}}\n\\]\n\nIf channel-length modulation is neglected,\n\n\\[\nA_v\\approx -\\frac{g_{m1}}{g_{m2}}\n\\]\n\nand since both devices carry the same DC current,\n\n\\[\nA_v\\approx -\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n\\]\n\n---\n\n## Summary\n\nThis circuit behaves like a ratioed inverter/common-source amplifier with a diode-connected PMOS active load.\n\n- \\(M_2\\) is always saturated when on.\n- Low \\(V_{in}\\): \\(M_1\\) off, \\(V_{out}\\approx V_{DD}-|V_{TP}|\\).\n- High \\(V_{in}\\): \\(M_1\\) on, \\(V_{out}\\) pulled low but not exactly to 0.\n- There is static power dissipation when \\(V_{out}\\) is low.\n- The logic high is degraded compared with a true CMOS inverter.",
        "format": "markdown",
        "sha256": "b8c93cc125451f9168a1edfed32fffed9a168a91c092b3760bc1de586f789cd5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS common-source stage with a diode-connected PMOS load and gives the inverting gain both with and without channel-length modulation, consistently including both output conductances. The additional large-signal analysis does not undermine the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 15211,
        "total_tokens": 15931,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 15211,
        "total_tokens": 15931,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Interpreting the symbols as **pMOS transistors**, the circuit is a **ratioed pMOS inverter / common-source pMOS stage with a diode-connected pMOS load to ground**.\n\n- \\(M_2\\): pMOS pull-up controlled by \\(V_{in}\\).  \n- \\(M_1\\): pMOS with gate and drain tied to ground, so it is diode-connected and acts as a nonlinear pull-down/load.  \n- \\(V_{out}\\) is between them.\n\nAssume long-channel square-law devices, no body effect, no channel-length modulation, and \\(|V_{TP1}|=|V_{TP2}|=V_T\\).\n\n---\n\n## Qualitative operation\n\n### 1. \\(V_{in}\\) low\n\n\\[\nV_{SG2}=V_{DD}-V_{in}\n\\]\n\nis large, so \\(M_2\\) turns on and pulls \\(V_{out}\\) upward.\n\nBut \\(M_1\\) also turns on when\n\n\\[\nV_{out}>V_T\n\\]\n\nbecause for \\(M_1\\),\n\n\\[\nV_{SG1}=V_{out}\n\\]\n\nThus a DC current flows from \\(V_{DD}\\) to ground through \\(M_2\\) and \\(M_1\\). The output goes high, but generally\n\n\\[\nV_{OH}<V_{DD}\n\\]\n\nunless \\(M_2\\) is much stronger than \\(M_1\\).\n\n---\n\n### 2. \\(V_{in}\\) high\n\nWhen\n\n\\[\nV_{in}\\ge V_{DD}-V_T\n\\]\n\nthen\n\n\\[\nV_{SG2}<V_T\n\\]\n\nso \\(M_2\\) is off. \\(M_1\\) pulls the output downward as long as \\(V_{out}>V_T\\). In an ideal threshold model, the output is only actively pulled down to about\n\n\\[\nV_{out}\\approx V_T\n\\]\n\nBelow that, \\(M_1\\) is off. In a real circuit, leakage/subthreshold current may eventually pull it closer to 0 V, but the pull-down becomes very weak.\n\nSo the circuit behaves like an inverter, but not a rail-to-rail CMOS inverter.\n\n---\n\n## DC transfer relation\n\nLet\n\n\\[\n\\beta_i=\\mu_p C_{ox}\\frac{W_i}{L_i}\n\\]\n\nand define\n\n\\[\nk=\\frac{\\beta_2}{\\beta_1}, \\qquad r=\\sqrt{k}\n\\]\n\nFor \\(M_1\\), since it is diode-connected,\n\n\\[\nI_1=\\frac{1}{2}\\beta_1\\left(V_{out}-V_T\\right)^2\n\\]\n\nwhen \\(V_{out}>V_T\\).\n\nFor \\(M_2\\),\n\n\\[\nV_{SG2}=V_{DD}-V_{in}\n\\]\n\nand it turns off when\n\n\\[\nV_{in}\\ge V_{DD}-V_T\n\\]\n\n---\n\n### Region 1: \\(M_2\\) in saturation\n\nThis occurs for sufficiently large \\(V_{in}\\), specifically\n\n\\[\nV_{in}\\ge \\frac{r}{1+r}(V_{DD}-V_T)\n\\]\n\nThen\n\n\\[\nI_2=\\frac{1}{2}\\beta_2\\left(V_{DD}-V_{in}-V_T\\right)^2\n\\]\n\nSetting \\(I_1=I_2\\),\n\n\\[\n\\frac{1}{2}\\beta_1\\left(V_{out}-V_T\\right)^2\n=\n\\frac{1}{2}\\beta_2\\left(V_{DD}-V_{in}-V_T\\right)^2\n\\]\n\nso\n\n\\[\n\\boxed{\nV_{out}\n=\nV_T\n+\n\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n\\left(V_{DD}-V_{in}-V_T\\right)\n}\n\\]\n\nor\n\n\\[\n\\boxed{\nV_{out}=V_T+r\\left(V_{DD}-V_{in}-V_T\\right)\n}\n\\]\n\nThe small-signal gain in this region is approximately\n\n\\[\n\\boxed{\nA_v=\\frac{dV_{out}}{dV_{in}}\\approx -r\n}\n\\]\n\nMore generally, including output resistances,\n\n\\[\n\\boxed{\nA_v\\approx -\\frac{g_{m2}}{g_{m1}+g_{o1}+g_{o2}}\n}\n\\]\n\n---\n\n### Region 2: \\(M_2\\) in triode\n\nFor low \\(V_{in}\\), \\(M_2\\) is strongly on and usually operates in triode. Then \\(V_{out}\\) is found from\n\n\\[\nI_1=I_2\n\\]\n\nwith\n\n\\[\nI_2=\\beta_2\n\\left[\n\\left(V_{DD}-V_{in}-V_T\\right)\\left(V_{DD}-V_{out}\\right)\n-\\frac{1}{2}\\left(V_{DD}-V_{out}\\right)^2\n\\right]\n\\]\n\nThe output high level at \\(V_{in}=0\\) is\n\n\\[\n\\boxed{\nV_{OH}\n=\nV_T+\n\\left(V_{DD}-V_T\\right)\n\\sqrt{\\frac{k}{1+k}}\n}\n\\]\n\nwhere\n\n\\[\nk=\\frac{\\beta_2}{\\beta_1}\n\\]\n\nSo if \\(M_2\\) is much stronger than \\(M_1\\), \\(V_{OH}\\) approaches \\(V_{DD}\\).\n\n---\n\n## Summary\n\nThis circuit is an **inverting ratioed pMOS stage**.\n\n| Input | \\(M_2\\) | \\(M_1\\) | Output |\n|---|---|---|---|\n| \\(V_{in}\\) low | ON | ON | High, but \\(<V_{DD}\\) |\n| \\(V_{in}\\) high | OFF | weakly ON/off | Low, roughly \\(V_T\\) in ideal model |\n\nImportant properties:\n\n\\[\n\\boxed{\\text{It inverts.}}\n\\]\n\n\\[\n\\boxed{\\text{It consumes static power when } V_{in}\\text{ is low.}}\n\\]\n\n\\[\n\\boxed{\\text{It is not rail-to-rail like a CMOS inverter.}}\n\\]\n\n\\[\n\\boxed{\\text{Output levels depend on the transistor size ratio } \\beta_2/\\beta_1.}\n\\]",
        "format": "markdown",
        "sha256": "8e944f7626a23b508e00fe7f19e8eee5ff25ded56fe6dbe0296b05cda8ebdfda"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as pMOS, M2 as the common-source input device, and M1 as a diode-connected pMOS load to ground. It gives the gm-based gain, including the square-law result and output-resistance correction, and its inverter/pull-down framing does not replace the correct load interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 14834,
        "total_tokens": 16512,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 14834,
        "total_tokens": 16512,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the symbols denote **pMOS enhancement transistors**, the circuit is not a normal CMOS inverter. \\(M_1\\) has its **gate and drain tied to ground**, so it is a **diode-connected pMOS pull-down/clamp**. \\(M_2\\) is a pMOS pull-up controlled by \\(V_{in}\\).\n\nLet\n\n\\[\nV_T=|V_{TP}|,\\qquad \\beta_i=\\mu_p C_{ox}(W/L)_i\n\\]\n\nand ignore body effect/channel-length modulation.\n\n### 1. Transistor conditions\n\nFor \\(M_1\\):\n\n\\[\nV_{SG1}=V_{out},\\qquad V_{SD1}=V_{out}\n\\]\n\nSo \\(M_1\\) turns on only if\n\n\\[\nV_{out}>V_T\n\\]\n\nand, when on, it is diode-connected and in saturation:\n\n\\[\nI_1=\\frac{1}{2}\\beta_1(V_{out}-V_T)^2\n\\]\n\nFor \\(M_2\\):\n\n\\[\nV_{SG2}=V_{DD}-V_{in}\n\\]\n\nSo \\(M_2\\) is on only if\n\n\\[\nV_{in}<V_{DD}-V_T\n\\]\n\nIts current is\n\n\\[\nI_2=\\frac{1}{2}\\beta_2(V_{DD}-V_{in}-V_T)^2\n\\]\n\nif \\(M_2\\) is saturated, and\n\n\\[\nI_2=\\beta_2\\left[(V_{DD}-V_{in}-V_T)(V_{DD}-V_{out})\n-\\frac{(V_{DD}-V_{out})^2}{2}\\right]\n\\]\n\nif \\(M_2\\) is in triode.\n\nAt DC:\n\n\\[\nI_1=I_2\n\\]\n\n---\n\n### 2. Logic behavior\n\n#### \\(V_{in}\\) high\n\nIf\n\n\\[\nV_{in}\\ge V_{DD}-V_T\n\\]\n\nthen \\(M_2\\) is off. \\(M_1\\) discharges \\(V_{out}\\) only until\n\n\\[\nV_{out}\\approx V_T\n\\]\n\nBelow that, \\(M_1\\) also turns off, so the node becomes weak/floating. Thus the “low” output is not a true 0 V.\n\n\\[\nV_{OL}\\approx |V_{TP}|\n\\]\n\n#### \\(V_{in}\\) low\n\nIf \\(V_{in}=0\\), \\(M_2\\) turns on and tries to pull \\(V_{out}\\) up toward \\(V_{DD}\\). But \\(M_1\\) is also on, so there is DC current from \\(V_{DD}\\) to ground.\n\nFor \\(V_{in}=0\\), assuming \\(M_2\\) is in triode,\n\n\\[\nV_{OH}=V_T+\\frac{V_{DD}-V_T}{\\sqrt{1+\\beta_1/\\beta_2}}\n\\]\n\nSo \\(V_{out}\\) approaches \\(V_{DD}\\) only if \\(M_2\\) is much stronger than \\(M_1\\), i.e.\n\n\\[\n\\beta_2\\gg \\beta_1\n\\]\n\n---\n\n### 3. Conclusion\n\nThe circuit behaves like a **ratioed pMOS inverter-like stage**:\n\n\\[\nV_{in}\\ \\text{low} \\Rightarrow V_{out}\\ \\text{high-ish}\n\\]\n\n\\[\nV_{in}\\ \\text{high} \\Rightarrow V_{out}\\approx |V_{TP}|\n\\]\n\nBut it is **not a good CMOS inverter** because:\n\n- the low output is not 0 V,\n- there is static power dissipation when both devices conduct,\n- the output levels depend on transistor sizing,\n- noise margins are poor.\n\nIf \\(M_1\\) was intended to be an nMOS enhancement transistor instead, then with its gate tied to ground, \\(V_{GS1}=0\\), so \\(M_1\\) is always off and the output has no valid pull-down path.",
        "format": "markdown",
        "sha256": "380c3e64e86009966db635cf542f568fd965a83b1f21ff657f73ecc83499d1e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the Vin-controlled input device, and M1 as a gate/drain-grounded diode-connected PMOS load. The I1 = I2 analysis provides the permitted current-balance explanation; the inverter-like comments are acceptable secondary framing.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 16930,
        "total_tokens": 18608,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 16930,
        "total_tokens": 18608,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the MOS symbols shown are **pMOS transistors**, the circuit is a **ratioed pMOS inverter-like stage** with a diode-connected pMOS pull-down device.\n\nLet \\(V_T=|V_{TP}|\\), and ignore channel-length modulation/body effect.\n\n### 1. Device connections\n\n- **\\(M_2\\)**: pMOS pull-up  \n  \\[\n  S_2=V_{DD},\\quad G_2=V_{in},\\quad D_2=V_{out}\n  \\]\n  It turns on when:\n  \\[\n  V_{SG2}=V_{DD}-V_{in}>V_T\n  \\]\n  so \\(M_2\\) is ON for:\n  \\[\n  V_{in}<V_{DD}-V_T\n  \\]\n\n- **\\(M_1\\)**: diode-connected pMOS to ground  \n  \\[\n  S_1=V_{out},\\quad G_1=D_1=0\n  \\]\n  It turns on when:\n  \\[\n  V_{SG1}=V_{out}>V_T\n  \\]\n  and, when on, it is always in saturation because \\(G_1=D_1\\).\n\n---\n\n### 2. Qualitative operation\n\n#### \\(V_{in}\\) low\n\n\\(M_2\\) turns ON and sources current from \\(V_{DD}\\) to \\(V_{out}\\).  \n\\(M_1\\) also conducts if \\(V_{out}>V_T\\), pulling current to ground.\n\nSo \\(V_{out}\\) rises, but not exactly to \\(V_{DD}\\). It settles at a value determined by the strength ratio of \\(M_2\\) and \\(M_1\\).\n\nThus:\n\n\\[\nV_{in}=0 \\quad \\Rightarrow \\quad V_{out}=V_{OH}<V_{DD}\n\\]\n\nThere is a static DC current path:\n\n\\[\nV_{DD}\\rightarrow M_2\\rightarrow M_1\\rightarrow GND\n\\]\n\nso this circuit consumes static power when \\(M_2\\) is on.\n\n---\n\n#### \\(V_{in}\\) high\n\nIf:\n\n\\[\nV_{in}\\ge V_{DD}-V_T\n\\]\n\nthen \\(M_2\\) turns OFF. \\(M_1\\) can only discharge \\(V_{out}\\) until:\n\n\\[\nV_{out}\\approx V_T\n\\]\n\nBelow that, \\(M_1\\) also turns OFF, so the node is weakly held or may float in an ideal model.\n\nThus:\n\n\\[\nV_{in}=V_{DD} \\quad \\Rightarrow \\quad V_{out}\\approx V_T\n\\]\n\nnot 0 V.\n\nSo the circuit is **not rail-to-rail**.\n\n---\n\n### 3. DC transfer characteristic\n\nLet:\n\n\\[\n\\beta_i=\\mu_p C_{ox}\\frac{W_i}{L_i}\n\\]\n\nand define:\n\n\\[\nr=\\frac{\\beta_2}{\\beta_1}, \\qquad A=V_{DD}-V_T\n\\]\n\nFor \\(M_1\\), since it is diode-connected:\n\n\\[\nI_1=\\frac{\\beta_1}{2}(V_{out}-V_T)^2\n\\]\n\nwhen \\(V_{out}>V_T\\).\n\nFor \\(M_2\\), if it is in saturation:\n\n\\[\nI_2=\\frac{\\beta_2}{2}(V_{DD}-V_{in}-V_T)^2\n\\]\n\nEquating currents gives:\n\n\\[\nV_{out}=V_T+\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\left(V_{DD}-V_{in}-V_T\\right)\n\\]\n\nThis region is valid when \\(M_2\\) is saturated, i.e.\n\n\\[\nV_{out}\\le V_{in}+V_T\n\\]\n\nThe boundary occurs at:\n\n\\[\nV_{in}^{*}=\\frac{\\sqrt{r}}{1+\\sqrt{r}}\\left(V_{DD}-V_T\\right)\n\\]\n\nFor lower input voltages, \\(M_2\\) operates in triode and the output is found from:\n\n\\[\n\\beta_2\\left[(V_{DD}-V_{in}-V_T)(V_{DD}-V_{out})\n-\\frac{1}{2}(V_{DD}-V_{out})^2\\right]\n=\n\\frac{\\beta_1}{2}(V_{out}-V_T)^2\n\\]\n\n---\n\n### 4. Logic interpretation\n\nThis circuit behaves like an **inverting stage**:\n\n\\[\nV_{in}\\downarrow \\quad \\Rightarrow \\quad V_{out}\\uparrow\n\\]\n\n\\[\nV_{in}\\uparrow \\quad \\Rightarrow \\quad V_{out}\\downarrow\n\\]\n\nBut it is a poor digital inverter because:\n\n1. \\(V_{OL}\\neq 0\\); the low output is approximately \\(V_T\\).\n2. \\(V_{OH}<V_{DD}\\), depending on transistor sizing.\n3. It consumes static power when \\(V_{in}\\) is low.\n4. The output can float once \\(V_{out}<V_T\\).\n\nSo this is a **ratioed pMOS inverter with a diode-connected pMOS load**, not a proper CMOS inverter.",
        "format": "markdown",
        "sha256": "83c1c3cad2edb8015a4698ef954712a4f6c8dd385d4d6844de1017fb0ee83879"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain at ground. Its current-balance analysis is an acceptable equivalent to stating the gm/gm gain; the inverter framing does not replace the correct topology interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 16145,
        "total_tokens": 17823,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 16145,
        "total_tokens": 17823,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are ac grounds and body effect is neglected:\n\n\\[\nR_{out}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\n\\]\n\nwhere \\(M_1\\) is the lower/cascode device whose drain is the output node.\n\nFor large intrinsic gain, \\(g_{m1}r_{o1}\\gg 1\\),\n\n\\[\nR_{out}\\approx g_{m1}r_{o1}r_{o2}\n\\]\n\nIf body effect is included, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\):\n\n\\[\nR_{out}=r_{o1}+r_{o2}+\\left(g_{m1}+g_{mb1}\\right)r_{o1}r_{o2}\n\\]",
        "format": "markdown",
        "sha256": "af909e861b5401df237cc059239ae3aebe1291450945a2cbfb117b41eee54b4a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the cascode device and gives the correct output-resistance expression and approximation; including body effect is also correct.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2669,
        "output_tokens": 7456,
        "total_tokens": 10125,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2669,
        "output_tokens": 7456,
        "total_tokens": 10125,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the MOSFETs are in saturation, the bias voltages are ideal ac grounds, and body effect is neglected:\n\n\\[\nR_{\\text{out}}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\n\\]\n\nor equivalently,\n\n\\[\nR_{\\text{out}}=r_{o1}+r_{o2}\\left(1+g_{m1}r_{o1}\\right)\n\\]\n\nFor \\(g_{m1}r_{o1}\\gg 1\\),\n\n\\[\n\\boxed{R_{\\text{out}}\\approx g_{m1}r_{o1}r_{o2}}\n\\]\n\nIf body effect is included for \\(M_1\\), replace \\(g_{m1}\\) with \\(g_{m1}+g_{mb1}\\):\n\n\\[\nR_{\\text{out}}=r_{o1}+r_{o2}+(g_{m1}+g_{mb1})r_{o1}r_{o2}\n\\]",
        "format": "markdown",
        "sha256": "81fbda9ea7fdd52abe468372c92d0be82222e6e91aedf12f6cccb9359eaad750"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the correct output-resistance expression and approximation with M1’s transconductance as the cascode factor. The body-effect term is optional, and the stated approximation condition is acceptable.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2669,
        "output_tokens": 9034,
        "total_tokens": 11703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2669,
        "output_tokens": 9034,
        "total_tokens": 11703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are AC grounds and both MOSFETs are in saturation, the output resistance looking into the drain of \\(M_1\\) is\n\n\\[\nR_{\\text{out}}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\n\\]\n\nIf body effect is included for \\(M_1\\),\n\n\\[\n\\boxed{R_{\\text{out}}=r_{o1}+r_{o2}+\\left(g_{m1}+g_{mb1}\\right)r_{o1}r_{o2}}\n\\]\n\nSince usually \\(g_m r_o \\gg 1\\),\n\n\\[\nR_{\\text{out}}\\approx g_{m1}r_{o1}r_{o2}\n\\]\n\nor with body effect,\n\n\\[\nR_{\\text{out}}\\approx \\left(g_{m1}+g_{mb1}\\right)r_{o1}r_{o2}.\n\\]",
        "format": "markdown",
        "sha256": "f6010b233eeb283ed67f714cdfcf7eb5dd14ef0fdbae1083c0094ad4ff60e915"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the correct output-resistance expression and approximation with M1 as the cascode device; omitting an explicit PMOS label is allowed by the full-credit rule.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2669,
        "output_tokens": 5929,
        "total_tokens": 8598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2669,
        "output_tokens": 5929,
        "total_tokens": 8598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_2\\) is a PMOS device with source at \\(V_{DD}\\), drain at node \\(X\\), and gate at \\(V_{b2}\\), \\(M_2\\) is in saturation if\n\n\\[\nV_{SD2} \\ge V_{SG2}-|V_{TP}|\n\\]\n\nFor \\(M_2\\),\n\n\\[\nV_{SD2}=V_{DD}-V_X\n\\]\n\nand\n\n\\[\nV_{SG2}=V_{DD}-V_{b2}\n\\]\n\nso the saturation condition becomes\n\n\\[\nV_{DD}-V_X \\ge V_{DD}-V_{b2}-|V_{TP}|\n\\]\n\nor\n\n\\[\n\\boxed{V_X \\le V_{b2}+|V_{TP}|}\n\\]\n\nEquivalently,\n\n\\[\n\\boxed{V_{SD2} \\ge V_{OV2}}\n\\]\n\nwhere \\(V_{OV2}=V_{SG2}-|V_{TP}|\\).\n\nIn practice, we ensure this by choosing the bias \\(V_{b1}\\) so that \\(M_1\\) sets node \\(X\\) low enough. If \\(M_1\\) is also in saturation,\n\n\\[\nV_X \\approx V_{b1}+|V_{TP1}|+V_{OV1}\n\\]\n\nso we choose \\(V_{b1}\\) such that\n\n\\[\nV_{b1}+|V_{TP1}|+V_{OV1} \\le V_{b2}+|V_{TP2}|\n\\]\n\nFor matched PMOS devices, this simplifies roughly to\n\n\\[\n\\boxed{V_{b1} \\lesssim V_{b2}-V_{OV1}}\n\\]\n\nwith some margin for process, voltage, temperature, and mismatch.\n\nSo the short answer is: choose the DC bias voltages so that node \\(X\\) is low enough that \\(M_2\\) has at least one overdrive voltage across its source-drain terminals.",
        "format": "markdown",
        "sha256": "0b5587acf7f0dbf4cd5cca4f290106db2e2cd7cca889f40ebd534c716741dff1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives M2’s PMOS saturation condition and relates the node voltage to Vb1 through M1, deriving the equivalent bias condition. The relation is stated approximately, but captures the required mechanism and result.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 10271,
        "total_tokens": 12836,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 10271,
        "total_tokens": 12836,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M2 is the upper **PMOS**, with source at \\(V_{DD}\\), gate at \\(V_{b2}\\), and drain at node \\(X\\).\n\nFor a PMOS to be in saturation:\n\n\\[\nV_{SD2} \\ge V_{SG2}-|V_{TP}|\n\\]\n\nFor M2:\n\n\\[\nV_{SD2}=V_{DD}-V_X\n\\]\n\n\\[\nV_{SG2}=V_{DD}-V_{b2}\n\\]\n\nSo the saturation condition is\n\n\\[\nV_{DD}-V_X \\ge V_{DD}-V_{b2}-|V_{TP}|\n\\]\n\nor equivalently,\n\n\\[\nV_X \\le V_{b2}+|V_{TP}|\n\\]\n\nAnother common way to write it is:\n\n\\[\nV_{DD}-V_X \\ge V_{OV2}\n\\]\n\nwhere\n\n\\[\nV_{OV2}=V_{SG2}-|V_{TP}|\n\\]\n\nSo to ensure M2 is in saturation, node \\(X\\) must be kept sufficiently below \\(V_{DD}\\), by at least the overdrive voltage of M2.\n\nThe lower transistor M1, biased by \\(V_{b1}\\), helps set node \\(X\\). Approximately, if M1 is also saturated,\n\n\\[\nV_X \\approx V_{b1}+|V_{TP1}|+V_{OV1}\n\\]\n\nTherefore, you choose \\(V_{b1}\\) and \\(V_{b2}\\) such that\n\n\\[\nV_X \\le V_{DD}-V_{OV2}\n\\]\n\nor\n\n\\[\nV_{b1}+|V_{TP1}|+V_{OV1} \\le V_{b2}+|V_{TP2}|\n\\]\n\nIn words: **bias M1 so that node \\(X\\) stays low enough to leave at least \\(V_{OV2}\\) across M2.** Otherwise M2 enters triode.",
        "format": "markdown",
        "sha256": "fae40bb9094e83b1ff5bb42be772b1eff58fa6d8261561fd549e5c78cbca80d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2 as a PMOS, states its saturation condition, and relates node X to M1’s gate bias Vb1 to derive the corresponding condition on Vb1. The M1 relation is expressed using threshold plus overdrive, an equivalent form.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2565,
        "output_tokens": 4045,
        "total_tokens": 6610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2565,
        "output_tokens": 4045,
        "total_tokens": 6610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_2\\) is the upper **PMOS** device, its source is at \\(V_{DD}\\), its gate is at \\(V_{b2}\\), and its drain is node \\(X\\).\n\nFor a PMOS to be in saturation:\n\n\\[\nV_{SD2} \\ge V_{SG2}-|V_{TP}|\n\\]\n\nHere,\n\n\\[\nV_{SD2}=V_{DD}-V_X\n\\]\n\nand\n\n\\[\nV_{SG2}=V_{DD}-V_{b2}\n\\]\n\nSo the saturation condition becomes\n\n\\[\nV_{DD}-V_X \\ge V_{DD}-V_{b2}-|V_{TP}|\n\\]\n\nwhich simplifies to\n\n\\[\n\\boxed{V_X \\le V_{b2}+|V_{TP}|}\n\\]\n\nEquivalently,\n\n\\[\n\\boxed{V_{SD2} \\ge V_{OV2}}\n\\]\n\nwhere \\(V_{OV2}=V_{SG2}-|V_{TP}|\\).\n\nSo we ensure \\(M_2\\) is in saturation by choosing the bias voltages, especially \\(V_{b1}\\), such that node \\(X\\) stays low enough:\n\n\\[\nV_X \\le V_{b2}+|V_{TP}|\n\\]\n\nIn practice, you add margin:\n\n\\[\nV_X < V_{b2}+|V_{TP}|\n\\]\n\nto account for process, temperature, and body-effect variations.",
        "format": "markdown",
        "sha256": "8f26484cfc8022ee3d97f189b7652421c6b73a1b23946509053f5d56bc98f7f0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies both the PMOS saturation condition and the required limit on VX, and qualitatively notes that Vb1 should bias VX appropriately. It omits the key relation VX = Vb1 + |VGS1| or an explicit resulting condition on Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2565,
        "output_tokens": 8085,
        "total_tokens": 10650,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2565,
        "output_tokens": 8085,
        "total_tokens": 10650,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS cascode common-source amplifier** with a current-source load \\(I_1\\).  \n\\(M_1\\) is the input common-source device, and \\(M_2\\) is the cascode/common-gate device biased by \\(V_{b1}\\).\n\nAssume both MOSFETs are in saturation and body effect is ignored unless noted.\n\n---\n\n## 1. DC bias\n\nThe current source forces\n\n\\[\nI_{D1}=I_{D2}=I_1\n\\]\n\nFor long-channel square-law devices,\n\n\\[\nI_1=\\frac{1}{2}\\beta_1 V_{OV1}^2\n\\]\n\n\\[\nI_1=\\frac{1}{2}\\beta_2 V_{OV2}^2\n\\]\n\nso\n\n\\[\nV_{OV1}=\\sqrt{\\frac{2I_1}{\\beta_1}}, \\qquad\nV_{OV2}=\\sqrt{\\frac{2I_1}{\\beta_2}}\n\\]\n\nThe required input bias is approximately\n\n\\[\nV_{IN,Q}=V_{T1}+V_{OV1}\n\\]\n\nFor \\(M_2\\),\n\n\\[\nV_{GS2}=V_{b1}-V_X=V_{T2}+V_{OV2}\n\\]\n\ntherefore\n\n\\[\nV_X \\approx V_{b1}-V_{T2}-V_{OV2}\n\\]\n\n---\n\n## 2. Saturation conditions\n\nFor \\(M_1\\) to remain saturated,\n\n\\[\nV_{DS1}=V_X \\ge V_{OV1}\n\\]\n\nso\n\n\\[\nV_{b1}-V_{T2}-V_{OV2} \\ge V_{OV1}\n\\]\n\nFor \\(M_2\\) to remain saturated,\n\n\\[\nV_{DS2}=V_{out}-V_X \\ge V_{OV2}\n\\]\n\nso\n\n\\[\nV_{out} \\ge V_X+V_{OV2}\n\\]\n\nUsing the expression for \\(V_X\\),\n\n\\[\nV_{out,\\min} \\approx V_{b1}-V_{T2}\n\\]\n\nIf \\(V_{b1}\\) is chosen minimally so that \\(M_1\\) is just saturated,\n\n\\[\nV_{b1} \\approx V_{T2}+V_{OV2}+V_{OV1}\n\\]\n\nthen\n\n\\[\nV_{out,\\min} \\approx V_{OV1}+V_{OV2}\n\\]\n\nThe maximum output voltage is limited by the compliance of the current source \\(I_1\\), e.g.\n\n\\[\nV_{out,\\max} \\approx V_{DD}-V_{\\text{headroom of }I_1}\n\\]\n\n---\n\n## 3. Small-signal gain\n\nLet\n\n\\[\ng_{oi}=\\frac{1}{r_{oi}}\n\\]\n\nand let the current source have small-signal output resistance \\(R_I\\), with\n\n\\[\ng_I=\\frac{1}{R_I}\n\\]\n\nThe gate of \\(M_2\\) is at AC ground because \\(V_{b1}\\) is a DC bias.\n\nThe small-signal voltage gain is\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\n-\\frac{g_{m1}\\left(g_{m2}+g_{o2}\\right)}\n{g_I\\left(g_{o1}+g_{o2}+g_{m2}\\right)+g_{o1}g_{o2}}\n\\]\n\nEquivalently,\n\n\\[\nA_v=\n-\\frac{g_{m1}r_{o1}\\left(1+g_{m2}r_{o2}\\right)}\n{1+\\dfrac{r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}}{R_I}}\n\\]\n\nIf the current source is ideal, then \\(R_I\\to \\infty\\), so\n\n\\[\nA_v \\approx -g_{m1}r_{o1}\\left(1+g_{m2}r_{o2}\\right)\n\\]\n\nFor \\(g_m r_o \\gg 1\\),\n\n\\[\nA_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n\\]\n\nThe gain is negative, so the circuit is inverting.\n\n---\n\n## 4. Output resistance\n\nLooking into the drain of \\(M_2\\), the resistance of the NMOS cascode stack is\n\n\\[\nr_{out,n}=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n\\]\n\nUsually,\n\n\\[\nr_{out,n}\\approx g_{m2}r_{o1}r_{o2}\n\\]\n\nIncluding the current source resistance,\n\n\\[\nR_{out}=R_I \\parallel r_{out,n}\n\\]\n\nSo the approximate midband gain can also be written as\n\n\\[\nA_v \\approx -g_{m1}R_{out}\n\\]\n\nwhen \\(g_m r_o\\gg 1\\).\n\n---\n\n## 5. Qualitative operation\n\n- \\(M_1\\) converts \\(v_{in}\\) into a drain-current variation.\n- \\(M_2\\) cascodes \\(M_1\\), keeping node \\(X\\) relatively isolated from output swings.\n- The cascode action increases output resistance and therefore increases voltage gain.\n- Increasing \\(V_{b1}\\) raises \\(V_X\\), helping keep \\(M_1\\) saturated, but it also raises \\(V_{out,\\min}\\), reducing output swing.\n- The input resistance is very high because the input is applied to the MOS gate of \\(M_1\\).\n\nIf body effect is included for \\(M_2\\), replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\) in the gain and output-resistance expressions.",
        "format": "markdown",
        "sha256": "797b111088ec0b05e7dfa0ec53219217006667ee4c798d8917289dc70e562e31"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS input and M2 as the common-gate NMOS cascode, and gives the equivalent cascode gain and output-resistance expressions. The ideal-load gain and stated body-effect omission are allowed by the golden solution.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 12141,
        "total_tokens": 13443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 12141,
        "total_tokens": 13443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS cascode common-source amplifier**:\n\n- \\(M_1\\): input/common-source transistor.\n- \\(M_2\\): common-gate cascode transistor biased by \\(V_{b1}\\).\n- \\(I_1\\): current-source load/bias from \\(V_{DD}\\).\n- Output is taken at the drain of \\(M_2\\).\n\nAssume both MOSFETs operate in saturation and use low-frequency small-signal parameters \\(g_m\\), \\(r_o\\). Let\n\n\\[\ng_{o1}=\\frac1{r_{o1}}, \\qquad g_{o2}=\\frac1{r_{o2}}\n\\]\n\nand ignore body effect unless noted.\n\n---\n\n## 1. DC bias\n\nThe current source forces\n\n\\[\nI_{D1}=I_{D2}=I_1\n\\]\n\nso the input DC bias must satisfy approximately\n\n\\[\nI_1 \\approx \\frac12 \\mu_n C_{ox}\\frac WL_1 (V_{in}-V_{TH1})^2\n\\]\n\nfor \\(M_1\\).\n\nFor \\(M_2\\),\n\n\\[\nV_{GS2}=V_{b1}-V_X\n\\]\n\nso, approximately,\n\n\\[\nV_X \\approx V_{b1}-V_{TH2}-V_{OV2}\n\\]\n\nwhere \\(V_{OV2}=V_{GS2}-V_{TH2}\\).\n\nFor saturation:\n\n\\[\nV_X \\ge V_{OV1}\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nV_{out}-V_X \\ge V_{OV2}\n\\]\n\nfor \\(M_2\\). Thus the minimum output voltage is roughly\n\n\\[\nV_{out,\\min} \\approx V_X+V_{OV2}\\approx V_{b1}-V_{TH2}\n\\]\n\nassuming no body effect.\n\n---\n\n## 2. Small-signal gain\n\nWith the current source assumed ideal, its small-signal resistance is infinite, so it is an open circuit in small-signal analysis.\n\nThe small-signal voltage gain is approximately\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx -g_{m1}R_{out}\n\\]\n\nwhere the output resistance looking into the drain of the cascode stack is\n\n\\[\nR_{out}\\approx r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n\\]\n\nFor large intrinsic gain, \\(g_{m2}r_{o2}\\gg 1\\), this becomes\n\n\\[\nR_{out}\\approx g_{m2}r_{o1}r_{o2}\n\\]\n\nso\n\n\\[\nA_v\\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n\\]\n\nThe gain is negative because the stage is inverting: increasing \\(v_{in}\\) increases the current through \\(M_1\\), pulling \\(v_{out}\\) downward.\n\nA more exact open-circuit gain, ignoring body effect, is\n\n\\[\nA_v=-g_{m1}r_{o1}\\left(1+g_{m2}r_{o2}\\right)\n\\]\n\nwhich has the same dominant term:\n\n\\[\nA_v\\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n\\]\n\n---\n\n## 3. Output resistance\n\nWith \\(v_{in}=0\\), the small-signal output resistance of the NMOS cascode stack is\n\n\\[\nR_{out}=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n\\]\n\nIncluding body effect of \\(M_2\\), replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\):\n\n\\[\nR_{out}=r_{o1}+r_{o2}+\\left(g_{m2}+g_{mb2}\\right)r_{o1}r_{o2}\n\\]\n\nIf the current source \\(I_1\\) has finite small-signal resistance \\(r_I\\), then the total output resistance is\n\n\\[\nR_{out,total}=R_{out}\\parallel r_I\n\\]\n\nand the gain becomes approximately\n\n\\[\nA_v\\approx -g_{m1}\\left(R_{out}\\parallel r_I\\right)\n\\]\n\n---\n\n## 4. Input resistance\n\nAt low frequency the MOS gate draws essentially no current, so\n\n\\[\nR_{in}\\approx \\infty\n\\]\n\nneglecting leakage.\n\n---\n\n## 5. Role of \\(M_2\\)\n\n\\(M_2\\) is the cascode device. Its purpose is to keep node \\(X\\), the drain of \\(M_1\\), relatively isolated from output variations. This increases the output resistance by approximately the factor \\(g_{m2}r_{o2}\\), giving much higher gain than a simple common-source stage.\n\nSo the circuit is a **high-gain inverting NMOS cascode amplifier** biased by the current source \\(I_1\\).",
        "format": "markdown",
        "sha256": "64f27ae768f097e55e5a677c74e1b70f3ba5a4c8cb11ba3bb81ef7380f9ccab5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the ideal-load gain equivalent to the golden expression. The output-resistance and inversion explanations are also correct.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 9376,
        "total_tokens": 10678,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 9376,
        "total_tokens": 10678,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) and \\(M_2\\) are NMOS devices and both are biased in saturation, the circuit is a **current-source-loaded NMOS cascode common-source amplifier**.\n\n---\n\n## 1. Function of each device\n\n- \\(M_1\\): input common-source transistor.\n- \\(M_2\\): cascode transistor biased by \\(V_{b1}\\).\n- \\(I_1\\): active load/current source from \\(V_{DD}\\).\n- Output is taken at the drain of \\(M_2\\).\n\nA positive small-signal change in \\(v_{in}\\) increases the drain current of \\(M_1\\), so \\(v_{out}\\) decreases. Therefore the amplifier is **inverting**.\n\n---\n\n## 2. DC bias\n\nThe bias current through both MOSFETs is approximately\n\n\\[\nI_D = I_1\n\\]\n\nIgnoring channel-length modulation,\n\n\\[\nI_1 = \\frac{1}{2}\\beta_1 (V_{IN,Q}-V_{TH1})^2\n\\]\n\nso\n\n\\[\nV_{OV1}=V_{IN,Q}-V_{TH1}\n\\]\n\nFor \\(M_2\\),\n\n\\[\nI_1 = \\frac{1}{2}\\beta_2 (V_{b1}-V_X-V_{TH2})^2\n\\]\n\nso\n\n\\[\nV_X = V_{b1}-V_{TH2}-V_{OV2}\n\\]\n\nwhere\n\n\\[\nV_{OV2}=V_{GS2}-V_{TH2}\n\\]\n\n---\n\n## 3. Saturation conditions\n\nFor \\(M_1\\) to remain in saturation,\n\n\\[\nV_X \\ge V_{OV1}\n\\]\n\nFor \\(M_2\\) to remain in saturation,\n\n\\[\nV_{out}-V_X \\ge V_{OV2}\n\\]\n\nUsing\n\n\\[\nV_{OV2}=V_{b1}-V_X-V_{TH2}\n\\]\n\nthe condition becomes\n\n\\[\nV_{out} \\ge V_{b1}-V_{TH2}\n\\]\n\nThus the minimum output voltage is approximately\n\n\\[\nV_{out,\\min} \\approx V_X + V_{OV2}\n\\]\n\nIf \\(V_X\\) is chosen close to \\(V_{OV1}\\), then\n\n\\[\nV_{out,\\min} \\approx V_{OV1}+V_{OV2}\n\\]\n\nThe upper output swing is limited by the current source compliance. For an ideal current source,\n\n\\[\nV_{out,\\max} \\approx V_{DD}\n\\]\n\nFor a real PMOS current-source load,\n\n\\[\nV_{out,\\max} \\approx V_{DD}-V_{OV,p}\n\\]\n\n---\n\n## 4. Small-signal gain\n\nLet\n\n\\[\ng_{m1},\\; g_{m2}\n\\]\n\nbe the transconductances of \\(M_1\\) and \\(M_2\\), and let\n\n\\[\nr_{o1},\\; r_{o2}\n\\]\n\nbe their output resistances.\n\nAssume first that the current source \\(I_1\\) is ideal, so its small-signal resistance is infinite.\n\nThe small-signal voltage gain is approximately\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\]\n\nFor the ideal current-source load,\n\n\\[\nA_v = -g_{m1}r_{o1}\\left(1+g_{m2}r_{o2}\\right)\n\\]\n\nIf \\(g_{m2}r_{o2} \\gg 1\\), then\n\n\\[\nA_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n\\]\n\nSo the cascode device greatly increases gain.\n\n---\n\n## 5. Output resistance\n\nLooking into the drain of \\(M_2\\), with \\(v_{in}\\) AC-grounded, the output resistance of the cascode stack is\n\n\\[\nR_{out} = r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n\\]\n\nUsually,\n\n\\[\ng_{m2}r_{o2} \\gg 1\n\\]\n\nso\n\n\\[\nR_{out} \\approx g_{m2}r_{o1}r_{o2}\n\\]\n\nIf the current source has finite output resistance \\(r_I\\), then the total output resistance is\n\n\\[\nR_{out,total}\n=\nr_I \\parallel \\left(r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\\right)\n\\]\n\nand the gain is approximately\n\n\\[\nA_v \\approx -g_{m1}R_{out,total}\n\\]\n\n---\n\n## 6. Input resistance\n\nBecause the input is applied to the MOS gate of \\(M_1\\),\n\n\\[\nR_{in} \\approx \\infty\n\\]\n\nignoring gate leakage and capacitance.\n\n---\n\n## 7. Summary\n\nThis is a high-gain NMOS cascode amplifier.\n\n\\[\n\\boxed{A_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}}\n\\]\n\nfor an ideal current-source load and high intrinsic transistor gains.\n\nThe cascode transistor \\(M_2\\) increases output resistance and therefore increases voltage gain, but it reduces output voltage swing because it requires extra headroom:\n\n\\[\n\\boxed{V_{out,\\min} \\approx V_{OV1}+V_{OV2}}\n\\]\n\nThe amplifier is inverting: increasing \\(v_{in}\\) causes \\(v_{out}\\) to decrease.",
        "format": "markdown",
        "sha256": "684406935f151d2f91428de149b911f548d91eca0332e0a5c5e93b6e5d10cfdf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source input NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain with body effect omitted, as allowed by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 11044,
        "total_tokens": 12346,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 11044,
        "total_tokens": 12346,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The circuit is a **cascode structure**.\n\nIt consists of:\n\n- **M1**: a common-source NMOS input device, with gate driven by \\(V_{in}\\)\n- **M2**: a common-gate NMOS device, with gate biased at a fixed voltage \\(V_{b1}\\)\n- **\\(R_D\\)**: the drain load\n- Output taken at the drain of M2\n\nSo this is a classic **NMOS cascode amplifier with a resistive load**.\n\nThe key cascode feature is that M2 sits above M1 and holds the drain of M1 at a relatively constant voltage, reducing Miller effect and increasing output resistance. This improves gain and bandwidth compared with a simple common-source stage.\n\nStrictly, it behaves as a cascode if both M1 and M2 are properly biased in saturation and \\(V_{b1}\\) is a fixed bias voltage, i.e. AC ground.",
        "format": "markdown",
        "sha256": "60fdea71b5e411e08f48ada0833db5f0f841c98a50f26bc32100a2924a92d73f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is not a cascode: M1 is a PMOS source follower, not a common-source input device. The answer misidentifies M1 and incorrectly claims cascode behavior.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 718,
        "total_tokens": 2094,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 718,
        "total_tokens": 2094,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. It is a **cascode amplifier structure**.\n\n- **M1** is the input transistor in a **common-source** configuration: its source is grounded and its gate receives \\(V_{in}\\).\n- **M2** is stacked above M1 and has its gate biased by a fixed voltage \\(V_{b1}\\), so for small signals it acts like a **common-gate** transistor.\n- The output is taken at the drain of M2 through \\(R_D\\).\n\nSo this is a **resistively loaded NMOS cascode stage**: common-source M1 cascoded by common-gate M2.\n\nIt functions as a proper cascode as long as the bias voltage \\(V_{b1}\\) and \\(R_D\\) are chosen so that both M1 and M2 remain in saturation over the intended signal swing.",
        "format": "markdown",
        "sha256": "751b1aee3e64ed82273d40b296de094651d803a16451d9eee4f4003017735f96"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower with its drain grounded, not a grounded-source common-source input device, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 697,
        "total_tokens": 2073,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 697,
        "total_tokens": 2073,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — it is a **cascode structure**.\n\nSpecifically, it is an **NMOS cascode amplifier with a resistive load**:\n\n- **M1** is the input transistor, configured as a **common-source** device.\n- **M2** is the cascode transistor, configured as a **common-gate** device because its gate is biased by the fixed voltage \\(V_{b1}\\).\n- \\(R_D\\) is the drain load, and \\(V_{out}\\) is taken at the drain of \\(M_2\\).\n\nFor it to operate properly as a cascode, \\(V_{b1}\\) must bias \\(M_2\\) so that both \\(M_1\\) and \\(M_2\\) remain in saturation. The purpose of \\(M_2\\) is to keep the drain voltage of \\(M_1\\) relatively constant, increasing output resistance and improving gain.",
        "format": "markdown",
        "sha256": "ff31ad4bd5109385e64ea22497213feb3714ea0bd3f00d9c93c1cb433f760003"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is not a cascode: M1 is a PMOS source follower with its drain grounded, not a common-source input device. Calling it a cascode is fundamentally incorrect.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 714,
        "total_tokens": 2090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 714,
        "total_tokens": 2090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is less pronounced in a cascode because the capacitance that would normally be Miller-multiplied does **not see the full voltage gain**.\n\nIn a common-emitter/common-source stage, the collector/drain voltage swings strongly and opposite to the input. The base-collector or gate-drain capacitance therefore appears at the input as\n\n\\[\nC_{\\text{in}} \\approx C_{gd}(1-A_v)\n\\]\n\nso if \\(A_v\\) is large and negative, the effective input capacitance becomes much larger.\n\nIn a cascode, the lower transistor’s collector/drain is connected to the emitter/source of an upper common-base/common-gate transistor. That node is a **low-impedance node**, so its voltage changes very little. Therefore the lower transistor’s \\(C_{bc}\\) or \\(C_{gd}\\) has only a small voltage swing across it, giving little Miller multiplication.\n\nMeanwhile, the large output voltage swing occurs at the upper transistor’s collector/drain, but that node is largely isolated from the input. The upper transistor “shields” the input device from the output voltage swing.\n\nSo, in short:\n\n- Miller effect depends on voltage gain across a feedback capacitance.\n- In a cascode, the input transistor’s output node is held nearly constant.\n- Therefore its \\(C_{gd}\\) or \\(C_{bc}\\) is not multiplied by the full amplifier gain.\n- Result: lower effective input capacitance and higher bandwidth.",
        "format": "markdown",
        "sha256": "23e49680663a8ef1a6841ff1112a532900267326f06392fc5f54ef4e9ddb86dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the low-impedance cascode node and that Cgd does not see the full stage gain. However, it overstates the reduction: the node is not nearly AC-grounded, and the gain across Cgd is roughly −1, giving a Miller factor around 2 rather than negligible multiplication.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1799,
        "total_tokens": 1818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1487,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1799,
        "total_tokens": 1818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1487,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is smaller in a cascode because the capacitance that would normally cause Miller multiplication no longer sees the full amplifier voltage gain.\n\nIn a common-emitter/common-source stage, the base/gate-to-collector/drain capacitance \\(C_{\\mu}\\) or \\(C_{gd}\\) connects the input to a high-gain, inverted output node. The effective input capacitance becomes roughly\n\n\\[\nC_{\\text{in,Miller}} \\approx C_{gd}(1 - A_v)\n\\]\n\nso if \\(A_v\\) is large and negative, it becomes\n\n\\[\nC_{gd}(1+|A_v|)\n\\]\n\nwhich can be much larger than the physical capacitance.\n\nIn a cascode, the input transistor’s collector/drain is connected to the emitter/source of a common-base/common-gate transistor. That node is low impedance and has only a small voltage swing. Therefore the voltage gain from the input to the input transistor’s collector/drain is small, even though the total gain to the final output may be large.\n\nSo the input transistor’s \\(C_{gd}\\) or \\(C_{\\mu}\\) is multiplied only by the small local gain, not by the full output gain. The upper cascode device “shields” the input transistor from the large output voltage swing.\n\nThus, the Miller effect is much less pronounced, giving the cascode amplifier a much higher bandwidth than a simple common-emitter/common-source stage.",
        "format": "markdown",
        "sha256": "e9e1fc33f1ff412394c74a918630bf2ea4b867c64dc4d2a7f5a105b386b4f1d2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that the cascode’s low-impedance intermediate node limits the swing across the input transistor’s Cgd, so Miller multiplication depends on the local gain rather than the full output gain. It does not claim the effect is eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2374,
        "total_tokens": 2393,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2374,
        "total_tokens": 2393,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is less pronounced in a cascode because the capacitance that would normally feed output voltage back to the input does **not see the full voltage gain** of the amplifier.\n\nIn a simple common-emitter/common-source stage, the collector/drain voltage swings by a large amount opposite to the input. The base-collector or gate-drain capacitance therefore appears at the input as\n\n\\[\nC_\\text{in} \\approx C_{bc/gd}(1+|A_v|)\n\\]\n\nso even a small capacitance is multiplied by the voltage gain.\n\nIn a cascode, the input transistor’s collector/drain is connected to the emitter/source of the upper common-base/common-gate transistor. That node has **low AC impedance**, so its voltage is held nearly constant. Therefore the input transistor’s feedback capacitance, e.g. \\(C_{bc}\\) or \\(C_{gd}\\), has only a small voltage change across it and is not multiplied by the full stage gain.\n\nThe large output swing occurs at the collector/drain of the upper transistor, but the upper transistor’s base/gate is AC-grounded, so its capacitance does not feed back to the input in the same way.\n\nSo the cascode effectively isolates the input from the high-gain output node, greatly reducing Miller multiplication and improving high-frequency bandwidth.",
        "format": "markdown",
        "sha256": "774a157e8fd4da4fb484f6918ec22d4b7ef490e7f835036a22082ab01eb05ca0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that the cascode’s low-impedance intermediate node prevents Cgd from seeing the full stage gain. However, it overstates the effect by implying the node and voltage across Cgd are nearly constant/small; the drain gain is roughly −1 for similar devices, so Cgd still has about a factor-of-2 Miller multiplication.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1313,
        "total_tokens": 1332,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1313,
        "total_tokens": 1332,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the usual CMOS interpretation of the symbols, \\(M_1\\) is a pMOS current-source load and \\(M_2\\) is an nMOS common-gate input device. The circuit is therefore a pMOS-loaded nMOS common-gate amplifier.\n\nLet the dc input be \\(V_I\\) and the dc output be \\(V_O\\).\n\n## 1. DC operation\n\nFor \\(M_1\\), the pMOS load,\n\n\\[\nV_{SG1}=V_{DD}-V_{b2}\n\\]\n\nso \\(M_1\\) is on if\n\n\\[\nV_{DD}-V_{b2} > |V_{TP}|.\n\\]\n\nFor \\(M_2\\),\n\n\\[\nV_{GS2}=V_{b1}-V_I\n\\]\n\nso \\(M_2\\) is on if\n\n\\[\nV_{b1}-V_I > V_{TN}.\n\\]\n\nIf both transistors are in saturation,\n\n\\[\nI_{D1}=I_{D2}.\n\\]\n\nNeglecting channel-length modulation,\n\n\\[\nI_{D1}\\approx \\frac{1}{2}\\beta_p\\left(V_{DD}-V_{b2}-|V_{TP}|\\right)^2\n\\]\n\nand\n\n\\[\nI_{D2}\\approx \\frac{1}{2}\\beta_n\\left(V_{b1}-V_I-V_{TN}\\right)^2.\n\\]\n\nThus the bias point must satisfy\n\n\\[\n\\frac{1}{2}\\beta_p\\left(V_{DD}-V_{b2}-|V_{TP}|\\right)^2\n=\n\\frac{1}{2}\\beta_n\\left(V_{b1}-V_I-V_{TN}\\right)^2.\n\\]\n\nThe saturation constraints are\n\n\\[\nV_O \\le V_{b2}+|V_{TP}|\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nV_O \\ge V_{b1}-V_{TN}\n\\]\n\nfor \\(M_2\\).\n\nSo the approximate allowable output swing while both devices remain saturated is\n\n\\[\nV_{b1}-V_{TN} \\le V_O \\le V_{b2}+|V_{TP}|.\n\\]\n\n---\n\n## 2. Small-signal gain\n\nThe bias voltages \\(V_{b1}\\), \\(V_{b2}\\), and \\(V_{DD}\\) are ac grounds. Therefore \\(M_1\\) contributes mainly its output resistance \\(r_{o1}\\). The signal device is \\(M_2\\).\n\nFor \\(M_2\\),\n\n\\[\nv_{gs2}= -v_{in}.\n\\]\n\nA positive input variation reduces the drain current of \\(M_2\\), so the pMOS load pulls the output upward. Therefore the voltage gain is positive.\n\nUsing \\(g_{o1}=1/r_{o1}\\) and \\(g_{o2}=1/r_{o2}\\), KCL at the output gives\n\n\\[\n\\frac{v_o}{r_{o1}}+\\frac{v_o-v_{in}}{r_{o2}}-g_{m2}v_{in}=0.\n\\]\n\nThus\n\n\\[\n\\left(g_{o1}+g_{o2}\\right)v_o\n=\n\\left(g_{m2}+g_{o2}\\right)v_{in}.\n\\]\n\nTherefore\n\n\\[\nA_v=\\frac{v_o}{v_{in}}\n=\n\\frac{g_{m2}+g_{o2}}{g_{o1}+g_{o2}}.\n\\]\n\nUsually \\(g_{m2}\\gg g_{o2}\\), so\n\n\\[\nA_v \\approx g_{m2}\\left(r_{o1}\\parallel r_{o2}\\right).\n\\]\n\nIf body effect is included, replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\):\n\n\\[\nA_v \\approx \\left(g_{m2}+g_{mb2}\\right)\\left(r_{o1}\\parallel r_{o2}\\right).\n\\]\n\n---\n\n## 3. Output resistance\n\nWith \\(v_{in}=0\\), the small-signal output resistance is approximately\n\n\\[\nR_{out}=r_{o1}\\parallel r_{o2}.\n\\]\n\n---\n\n## 4. Input resistance\n\nLooking into the source of \\(M_2\\), with the output unloaded except for \\(r_{o1}\\),\n\n\\[\nR_{in}\\approx \\frac{r_{o1}+r_{o2}}{1+g_{m2}r_{o2}}.\n\\]\n\nIf the output node is held at ac ground, this reduces to the familiar common-gate result\n\n\\[\nR_{in}\\approx \\frac{1}{g_{m2}}.\n\\]\n\n---\n\n### Summary\n\nThe circuit is a non-inverting common-gate amplifier with a pMOS current-source load.\n\n\\[\n\\boxed{A_v \\approx g_{m2}\\left(r_{o1}\\parallel r_{o2}\\right)}\n\\]\n\n\\[\n\\boxed{R_{out}\\approx r_{o1}\\parallel r_{o2}}\n\\]\n\n\\[\n\\boxed{V_{b1}-V_{TN}\\le V_O \\le V_{b2}+|V_{TP}|}\n\\]\n\nA positive change in \\(V_{in}\\) causes a positive change in \\(V_{out}\\).",
        "format": "markdown",
        "sha256": "d47859d51a15bbf55a737cea24b1f73efd99f81e88f8c82c3ceb521fce81ef8b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with a PMOS current-source load, places the input at M2’s source, identifies the bias voltages, and gives the non-inverting gain and low input resistance. Its gain expression is equivalent to the required approximation; the additional analyses do not contradict the topology.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 14611,
        "total_tokens": 15835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 14611,
        "total_tokens": 15835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the usual CMOS interpretation:\n\n- \\(M_1\\) is a PMOS current-source load biased by \\(V_{b2}\\).\n- \\(M_2\\) is an NMOS common-gate device biased by \\(V_{b1}\\).\n- The input is applied at the source of \\(M_2\\), and the output is taken at the drain node.\n- \\(V_{b1}\\), \\(V_{b2}\\), and \\(V_{DD}\\) are AC grounds for small-signal analysis.\n\nSo this is a **common-gate amplifier with a PMOS current-source load**. Its voltage gain is **positive**, i.e. non-inverting.\n\n---\n\n## 1. DC operating conditions\n\nFor \\(M_1\\):\n\n\\[\nV_{SG1}=V_{DD}-V_{b2}\n\\]\n\nFor \\(M_1\\) to be on:\n\n\\[\nV_{DD}-V_{b2} > |V_{TP}|\n\\]\n\nFor \\(M_1\\) to remain in saturation:\n\n\\[\nV_{SD1} \\ge V_{SG1}-|V_{TP}|\n\\]\n\n\\[\nV_{DD}-V_{out} \\ge V_{DD}-V_{b2}-|V_{TP}|\n\\]\n\n\\[\n\\boxed{V_{out} \\le V_{b2}+|V_{TP}|}\n\\]\n\nFor \\(M_2\\):\n\n\\[\nV_{GS2}=V_{b1}-V_{in}\n\\]\n\nFor \\(M_2\\) to be on:\n\n\\[\nV_{b1}-V_{in} > V_{TN}\n\\]\n\nFor \\(M_2\\) to remain in saturation:\n\n\\[\nV_{DS2}\\ge V_{GS2}-V_{TN}\n\\]\n\n\\[\nV_{out}-V_{in}\\ge V_{b1}-V_{in}-V_{TN}\n\\]\n\n\\[\n\\boxed{V_{out}\\ge V_{b1}-V_{TN}}\n\\]\n\nTherefore, for both devices to be saturated,\n\n\\[\n\\boxed{V_{b1}-V_{TN} \\le V_{out} \\le V_{b2}+|V_{TP}|}\n\\]\n\nThe DC current is set by the equality\n\n\\[\nI_{D1}=I_{D2}\n\\]\n\nNeglecting channel-length modulation,\n\n\\[\n\\frac{1}{2}\\beta_p\\left(V_{DD}-V_{b2}-|V_{TP}|\\right)^2\n=\n\\frac{1}{2}\\beta_n\\left(V_{b1}-V_{in}-V_{TN}\\right)^2\n\\]\n\nSo the required DC input bias is approximately\n\n\\[\n\\boxed{\nV_{in,Q}=V_{b1}-V_{TN}\n-\\sqrt{\\frac{\\beta_p}{\\beta_n}}\\left(V_{DD}-V_{b2}-|V_{TP}|\\right)\n}\n\\]\n\n---\n\n## 2. Small-signal gain\n\nLet\n\n\\[\ng_{o1}=\\frac{1}{r_{o1}}, \\qquad g_{o2}=\\frac{1}{r_{o2}}\n\\]\n\nFor small-signal analysis, \\(V_{b1}\\), \\(V_{b2}\\), and \\(V_{DD}\\) are AC grounds. Thus the small-signal gate voltage of \\(M_2\\) is zero.\n\nFor \\(M_2\\),\n\n\\[\nv_{gs2}= -v_{in}\n\\]\n\nand\n\n\\[\nv_{ds2}=v_{out}-v_{in}\n\\]\n\nKCL at the output node gives\n\n\\[\ng_{o1}v_{out}+g_{o2}(v_{out}-v_{in})-g_{m2}v_{in}=0\n\\]\n\nTherefore,\n\n\\[\n(g_{o1}+g_{o2})v_{out}=(g_{m2}+g_{o2})v_{in}\n\\]\n\nSo the small-signal voltage gain is\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_{m2}+g_{o2}}{g_{o1}+g_{o2}}\n}\n\\]\n\nSince usually \\(g_{m2}\\gg g_{o2}\\),\n\n\\[\n\\boxed{\nA_v\\approx g_{m2}(r_{o1}\\parallel r_{o2})\n}\n\\]\n\nThe gain is positive, so the circuit is **non-inverting**.\n\nIf body effect is included, replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\):\n\n\\[\n\\boxed{\nA_v\\approx (g_{m2}+g_{mb2})(r_{o1}\\parallel r_{o2})\n}\n\\]\n\n---\n\n## 3. Output resistance\n\nWith the input set to AC ground,\n\n\\[\n\\boxed{\nR_{out}=r_{o1}\\parallel r_{o2}\n}\n\\]\n\n---\n\n## 4. Qualitative behavior\n\nIf \\(V_{in}\\) increases, then\n\n\\[\nV_{GS2}=V_{b1}-V_{in}\n\\]\n\ndecreases, so \\(M_2\\) conducts less current. The PMOS load \\(M_1\\) then pulls \\(V_{out}\\) upward.\n\nThus:\n\n\\[\n\\boxed{V_{in}\\uparrow \\Rightarrow V_{out}\\uparrow}\n\\]\n\nSo the circuit behaves as a **common-gate, non-inverting voltage amplifier** with gain approximately\n\n\\[\n\\boxed{A_v\\approx g_{m2}(r_{o1}\\parallel r_{o2})}\n\\]",
        "format": "markdown",
        "sha256": "ff1724024d21bf067df932c27a60307e0d93571b1fad86ffbc1e1602b1c2d7da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, source input, non-inverting gain, and the expected gain expression. It omits the low-input-resistance characteristic required for full credit.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 14156,
        "total_tokens": 15380,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 14156,
        "total_tokens": 15380,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the lower device is drawn as a **common-gate NMOS** \\(M_2\\) with source input \\(V_{in}\\), gate bias \\(V_{b1}\\), and the upper device \\(M_1\\) is a **PMOS current-source load** biased by \\(V_{b2}\\):\n\n## 1. DC operating point\n\nFor \\(M_1\\) PMOS:\n\n\\[\nV_{SG1}=V_{DD}-V_{b2},\\qquad V_{SD1}=V_{DD}-V_{out}\n\\]\n\nFor \\(M_2\\) NMOS:\n\n\\[\nV_{GS2}=V_{b1}-V_{in},\\qquad V_{DS2}=V_{out}-V_{in}\n\\]\n\nBoth transistors are on and in saturation if\n\n\\[\nV_{DD}-V_{b2} > |V_{TP}|\n\\]\n\n\\[\nV_{b1}-V_{in} > V_{TN}\n\\]\n\nand\n\n\\[\nV_{out} \\le V_{b2}+|V_{TP}| \\qquad \\text{for } M_1 \\text{ saturation}\n\\]\n\n\\[\nV_{out} \\ge V_{b1}-V_{TN} \\qquad \\text{for } M_2 \\text{ saturation}\n\\]\n\nSo the approximate allowed output swing while both devices remain saturated is\n\n\\[\n\\boxed{V_{b1}-V_{TN} \\le V_{out} \\le V_{b2}+|V_{TP}|}\n\\]\n\nThe dc current is set by equality of the two drain currents:\n\n\\[\nI_{D1}=I_{D2}\n\\]\n\nwith, neglecting channel-length modulation,\n\n\\[\nI_{D1}\\approx \\frac12 \\beta_p\\left(V_{DD}-V_{b2}-|V_{TP}|\\right)^2\n\\]\n\n\\[\nI_{D2}\\approx \\frac12 \\beta_n\\left(V_{b1}-V_{in}-V_{TN}\\right)^2\n\\]\n\n---\n\n## 2. Small-signal gain\n\nAt small signal, \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are ac grounds. Thus \\(M_1\\) behaves mainly as a resistance \\(r_{o1}\\) from output to ac ground. \\(M_2\\) is a common-gate device.\n\nLet\n\n\\[\ng_{o1}=\\frac1{r_{o1}},\\qquad g_{o2}=\\frac1{r_{o2}}\n\\]\n\nIncluding body effect, define\n\n\\[\ng_m^\\ast = g_{m2}+g_{mb2}\n\\]\n\nIf body effect is neglected or the body is tied to the source, use \\(g_m^\\ast=g_{m2}\\).\n\nWriting KCL at the output node:\n\n\\[\n(g_{o1}+g_{o2})v_{out}-(g_m^\\ast+g_{o2})v_{in}=0\n\\]\n\nso\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m^\\ast+g_{o2}}{g_{o1}+g_{o2}}\n}\n\\]\n\nUsually \\(g_m \\gg g_o\\), so\n\n\\[\n\\boxed{\nA_v \\approx g_m^\\ast \\left(r_{o1}\\parallel r_{o2}\\right)\n}\n\\]\n\nThe gain is **positive**, i.e. the stage is non-inverting. If \\(V_{in}\\) increases, \\(V_{GS2}\\) decreases, the NMOS current decreases, and the PMOS load pulls \\(V_{out}\\) upward.\n\n---\n\n## 3. Input and output resistances\n\nThe output resistance, with the input ac-grounded, is approximately\n\n\\[\n\\boxed{\nR_{out}\\approx r_{o1}\\parallel r_{o2}\n}\n\\]\n\nThe input resistance looking into the source of \\(M_2\\) is low, as expected for a common-gate stage. To first order,\n\n\\[\n\\boxed{\nR_{in}\\approx \\frac1{g_m^\\ast}\n}\n\\]\n\n---\n\nSo this circuit is a **common-gate amplifier with a PMOS current-source load**, giving a non-inverting voltage gain approximately\n\n\\[\n\\boxed{\nA_v \\approx g_{m2}\\left(r_{o1}\\parallel r_{o2}\\right)\n}\n\\]\n\nif body effect is neglected.",
        "format": "markdown",
        "sha256": "78e69d5015b0cc60f2f332113b7041a4bb0fcd4e9f3ff8c84ab3d5e7c72bbeae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, source input and bias voltages, non-inverting gain, and gives the required gain expression. Its low-input-resistance approximation is acceptable under the full-credit rule.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 17022,
        "total_tokens": 18246,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 17022,
        "total_tokens": 18246,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles** (assuming the bias/supply nodes are ideal AC grounds).\n\nReason: after small-signal grounding the DC supplies, there are only **two independent dynamic nodes**:\n\n1. The input gate node after \\(R_S\\)  \n2. The output node \\(V_{\\text{out}}\\)\n\nAll the capacitors are connected either from one of these nodes to AC ground or between these two nodes, so the small-signal denominator is second order.\n\nSo the circuit has:\n\n\\[\n\\boxed{2\\text{ poles}}\n\\]\n\nIt may also have a zero due to the gate-drain/feedforward capacitance, but the number of poles is two.",
        "format": "markdown",
        "sha256": "d1b0bd93fe831b7cb47f444176fae115f0d3f69fd46219c07c9344bd580cd5aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent dynamic nodes—the M1 gate and output—and notes that the gate-drain capacitance couples them and may introduce a zero.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 7914,
        "total_tokens": 9655,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 7914,
        "total_tokens": 9655,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles** (in the usual small-signal sense).\n\nReason: assuming the bias/supply nodes are **AC ground**, there are only **two independent dynamic nodes**:\n\n1. The gate/input node of \\(M_1\\) after \\(R_S\\)\n2. The output/drain node \\(V_{\\text{out}}\\)\n\nThe capacitors \\(C_{DB}\\), \\(C_{DB2}\\), and \\(C_{GD2}\\) are effectively from the output node to AC ground, while \\(C_{GS}\\) is from the input gate node to ground. \\(C_{GD}\\) couples the two nodes but does not create a new node.\n\nSo the transfer function is generally **second order**, hence the circuit has:\n\n\\[\n\\boxed{2 \\text{ poles}}\n\\]\n\nIf \\(R_S=0\\), the input node would be driven by an ideal source and one pole could disappear, leaving only one dominant output pole.",
        "format": "markdown",
        "sha256": "9fec24f1980e64a97aba15e69554ccb7fbe6eb80b4a3e9e4efac0322df66dfd5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two dynamic nodes and assigns the capacitors to the input and output nodes, with CGD coupling them. The RS=0 caveat does not change the answer for the shown circuit.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 4348,
        "total_tokens": 6089,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 4348,
        "total_tokens": 6089,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\nReason: for small-signal pole counting, the independent dynamic nodes are:\n\n1. **Input gate node** of \\(M_1\\) after \\(R_S\\)  \n   — includes \\(C_{GS}\\) and one side of \\(C_{GD}\\)\n\n2. **Output node**  \n   — includes \\(C_{DB}\\), \\(C_{DB2}\\), \\(C_{GD2}\\), and the other side of \\(C_{GD}\\)\n\nThe bias/supply nodes are AC grounds, so \\(C_{GD2}\\) and \\(C_{DB2}\\) just add capacitance to the output node and do not create extra poles.\n\nSo, despite having several capacitors, the circuit has **two independent capacitive nodes**, hence **two poles**.",
        "format": "markdown",
        "sha256": "ff263f60d1bae8667b72c37f975d0cd604955167a4a0deb1103d0ad28d98dd0e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent dynamic nodes—the M1 gate and output—and assigns the relevant capacitances to them, yielding two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 4316,
        "total_tokens": 6057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 4316,
        "total_tokens": 6057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume long-channel NMOS devices, same threshold \\(V_T\\), no body effect/channel-length modulation. Let the intermediate node between \\(M_1\\) and \\(M_2\\) be \\(V_X\\), and define\n\n\\[\nA=V_{in}-V_T,\\qquad \n\\beta_i=\\mu_n C_{ox}(W/L)_i .\n\\]\n\nThe resistor current is\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}.\n\\]\n\n## 1. Logic behavior\n\n- If \\(V_{in}<V_T\\): both NMOS devices are off, so\n\n\\[\nI_D \\approx 0,\\qquad V_{out}=V_{DD}.\n\\]\n\n- If \\(V_{in}>V_T\\): both devices conduct and pull \\(V_{out}\\) down through \\(R_D\\).\n\nThus the circuit is a resistive-load NMOS inverter. It gives\n\n\\[\nV_{in}\\ \\text{low} \\Rightarrow V_{out}\\ \\text{high}\n\\]\n\n\\[\nV_{in}\\ \\text{high} \\Rightarrow V_{out}\\ \\text{low}.\n\\]\n\nThere is static DC power consumption when the input is high.\n\n---\n\n## 2. Operating regions\n\nFor \\(M_1\\),\n\n\\[\nV_{GS1}=V_{in},\\qquad V_{DS1}=V_X.\n\\]\n\nFor \\(M_2\\),\n\n\\[\nV_{GS2}=V_{in}-V_X,\\qquad V_{DS2}=V_{out}-V_X.\n\\]\n\nFor \\(M_2\\) to be on,\n\n\\[\nV_{in}-V_X>V_T\n\\]\n\nso\n\n\\[\nV_X<V_{in}-V_T=A.\n\\]\n\nBut \\(M_1\\) would be saturated only if\n\n\\[\nV_X\\ge V_{in}-V_T=A.\n\\]\n\nTherefore, whenever current flows, \\(M_1\\) is in triode/linear region. The upper transistor \\(M_2\\) may be either saturated or triode.\n\nThe condition for \\(M_2\\) saturation is\n\n\\[\nV_{DS2}\\ge V_{GS2}-V_T\n\\]\n\n\\[\nV_{out}-V_X \\ge V_{in}-V_X - V_T\n\\]\n\n\\[\nV_{out}\\ge V_{in}-V_T=A.\n\\]\n\nSo:\n\n\\[\n\\boxed{M_2\\text{ saturated if }V_{out}\\ge V_{in}-V_T}\n\\]\n\n\\[\n\\boxed{M_2\\text{ triode if }V_{out}<V_{in}-V_T}\n\\]\n\n---\n\n## 3. Equivalent NMOS device\n\nThe two stacked NMOS devices with common gate can be modeled as a single NMOS with effective transconductance parameter\n\n\\[\n\\boxed{\\beta_{eq}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}}\n\\]\n\nor equivalently\n\n\\[\n\\frac{1}{\\beta_{eq}}=\\frac{1}{\\beta_1}+\\frac{1}{\\beta_2}.\n\\]\n\nIf the two transistors are identical, \\(\\beta_1=\\beta_2=\\beta\\), then\n\n\\[\n\\boxed{\\beta_{eq}=\\frac{\\beta}{2}}\n\\]\n\nso the stack behaves like one NMOS with approximately twice the channel length.\n\n---\n\n## 4. DC transfer characteristic\n\nThe load-line equation is\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}=I_D.\n\\]\n\nFor \\(V_{in}\\le V_T\\),\n\n\\[\n\\boxed{V_{out}=V_{DD}}\n\\]\n\nFor \\(V_{in}>V_T\\), define \\(A=V_{in}-V_T\\).\n\n### Saturation region: \\(V_{out}\\ge A\\)\n\n\\[\nI_D=\\frac{1}{2}\\beta_{eq}A^2\n\\]\n\nso\n\n\\[\n\\boxed{V_{out}=V_{DD}-\\frac{1}{2}R_D\\beta_{eq}(V_{in}-V_T)^2}\n\\]\n\nvalid as long as\n\n\\[\nV_{out}\\ge V_{in}-V_T.\n\\]\n\n### Triode region: \\(V_{out}<A\\)\n\n\\[\nI_D=\\beta_{eq}\\left[A V_{out}-\\frac{V_{out}^2}{2}\\right]\n\\]\n\nso\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\beta_{eq}\\left[(V_{in}-V_T)V_{out}-\\frac{V_{out}^2}{2}\\right].\n\\]\n\nSolving for \\(V_{out}\\),\n\n\\[\n\\boxed{\nV_{out}\n=\n\\frac{\n1+R_D\\beta_{eq}(V_{in}-V_T)\n-\n\\sqrt{\n\\left[1+R_D\\beta_{eq}(V_{in}-V_T)\\right]^2\n-2R_D\\beta_{eq}V_{DD}\n}\n}\n{R_D\\beta_{eq}}\n}\n\\]\n\nusing the smaller root.\n\n---\n\n## 5. Small-signal gain\n\nIn the saturation region,\n\n\\[\nI_D=\\frac{1}{2}\\beta_{eq}(V_{in}-V_T)^2\n\\]\n\nso\n\n\\[\ng_{m,eq}=\\frac{\\partial I_D}{\\partial V_{in}}\n=\n\\beta_{eq}(V_{in}-V_T).\n\\]\n\nTherefore the small-signal voltage gain is\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx\n-R_D\\beta_{eq}(V_{in}-V_T)\n}\n\\]\n\nFor identical devices,\n\n\\[\n\\boxed{\nA_v\\approx -\\frac{\\beta}{2}R_D(V_{in}-V_T)\n}\n\\]\n\nso the gain is about half that of a single-transistor resistive-load common-source stage with the same device size.\n\n---\n\n### Summary\n\nThe circuit is a resistive-load NMOS inverter. The two stacked NMOS transistors, both driven by \\(V_{in}\\), behave approximately like one NMOS transistor with\n\n\\[\n\\beta_{eq}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}.\n\\]\n\nFor identical transistors, the pull-down strength is halved. Thus the circuit has a higher effective on-resistance, lower gain, slower pull-down, and larger \\(V_{OL}\\) than a single-NMOS resistive-load inverter.",
        "format": "markdown",
        "sha256": "3d95e4933947d22e314b4fb8cf6b5984f7d5eb35ea051ee349e4b98544d3cd86"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS stack and derives the effective \u0000β\u0000 as the series combination, giving half the strength—and approximately twice the channel length—for identical devices. The extra inverter and operating-region analysis does not undermine the central conclusion.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 14878,
        "total_tokens": 16306,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 14878,
        "total_tokens": 16306,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(V_X\\) be the node between \\(M_1\\) and \\(M_2\\). Both NMOS gates are driven by \\(V_{in}\\), and \\(R_D\\) is a pull-up load. Functionally, this is a resistive-load NMOS inverter with a two-transistor series pull-down.\n\nAssume long-channel NMOS devices, no body effect, no channel-length modulation, and define \\(\\beta_i\\) by\n\n\\[\nI_D=\\beta_i\\left[(V_{GS}-V_T)V_{DS}-\\frac{V_{DS}^2}{2}\\right]\n\\]\n\nin triode and\n\n\\[\nI_D=\\frac{\\beta_i}{2}(V_{GS}-V_T)^2\n\\]\n\nin saturation.\n\nFor the two stacked NMOS devices with common gate, the pull-down behaves like a single NMOS with effective strength\n\n\\[\n\\beta_{\\text{eq}}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}\n\\]\n\nso if \\(M_1\\) and \\(M_2\\) are identical,\n\n\\[\n\\beta_{\\text{eq}}=\\frac{\\beta}{2}\n\\]\n\ni.e. the pull-down is about half as strong as one NMOS, or about twice the on-resistance.\n\n---\n\n### 1. Input low\n\nIf\n\n\\[\nV_{in}\\le V_T\n\\]\n\nthen \\(M_1\\) is off, so no DC current flows through \\(R_D\\). Thus\n\n\\[\nI_D\\approx 0\n\\]\n\nand\n\n\\[\nV_{out}=V_{DD}\n\\]\n\nSo the output is logic HIGH.\n\n---\n\n### 2. Input high\n\nLet\n\n\\[\nV_{OV}=V_{in}-V_T\n\\]\n\nFor \\(V_{in}>V_T\\), the NMOS stack conducts and pulls the output down. The current through the resistor must equal the NMOS stack current:\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}=I_D\n\\]\n\nThe pull-down current is\n\n\\[\nI_D=\n\\begin{cases}\n\\dfrac{\\beta_{\\text{eq}}}{2}(V_{in}-V_T)^2, \n& V_{out}\\ge V_{in}-V_T \\\\[1.2em]\n\\beta_{\\text{eq}}\\left[(V_{in}-V_T)V_{out}-\\dfrac{V_{out}^2}{2}\\right],\n& V_{out}<V_{in}-V_T\n\\end{cases}\n\\]\n\nThe first case corresponds to the effective NMOS being in saturation; the second corresponds to triode operation.\n\n---\n\n### 3. Output voltage expressions\n\n#### Saturation-region output\n\nIf\n\n\\[\nV_{out}\\ge V_{in}-V_T\n\\]\n\nthen\n\n\\[\nV_{out}=V_{DD}-\\frac{R_D\\beta_{\\text{eq}}}{2}(V_{in}-V_T)^2\n\\]\n\nFor identical NMOS devices,\n\n\\[\nV_{out}=V_{DD}-\\frac{R_D\\beta}{4}(V_{in}-V_T)^2\n\\]\n\n---\n\n#### Triode-region output\n\nIf\n\n\\[\nV_{out}<V_{in}-V_T\n\\]\n\nthen\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\beta_{\\text{eq}}\\left[(V_{in}-V_T)V_{out}-\\frac{V_{out}^2}{2}\\right]\n\\]\n\nSolving for \\(V_{out}\\),\n\n\\[\nV_{out}\n=\n\\frac{\n1+R_D\\beta_{\\text{eq}}(V_{in}-V_T)\n-\n\\sqrt{\\left[1+R_D\\beta_{\\text{eq}}(V_{in}-V_T)\\right]^2\n-2R_D\\beta_{\\text{eq}}V_{DD}}\n}\n{R_D\\beta_{\\text{eq}}}\n\\]\n\nThe smaller root is chosen because it gives the physical low-output solution.\n\n---\n\n### 4. Logic behavior\n\nSo the circuit implements an inverter:\n\n\\[\nV_{in}=0 \\Rightarrow V_{out}\\approx V_{DD}\n\\]\n\n\\[\nV_{in}=V_{DD} \\Rightarrow V_{out}=V_{OL}\n\\]\n\nwhere \\(V_{OL}\\) is not exactly zero because the pull-up is a resistor. It is found from the triode-region equation using \\(V_{in}=V_{DD}\\).\n\nFor a strong pull-down,\n\n\\[\nV_{OL}\\approx \\frac{V_{DD}}{1+R_D\\beta_{\\text{eq}}(V_{DD}-V_T)}\n\\]\n\nThus a larger \\(R_D\\) or larger transistor sizes give a lower output-low voltage.\n\n---\n\n### Important practical note\n\nIf the NMOS bodies are tied to ground, \\(M_2\\) experiences body effect because its source is at \\(V_X>0\\). Then its threshold voltage increases, the stack becomes weaker, and \\(V_{OL}\\) is higher than predicted above. In that case the exact solution requires including\n\n\\[\nV_{T2}=V_{T0}+\\gamma\\left(\\sqrt{2\\phi_F+V_X}-\\sqrt{2\\phi_F}\\right)\n\\]\n\nand solving numerically.\n\nIn first-order analysis, however, the circuit is simply a resistive-load NMOS inverter whose pull-down is weaker than a single NMOS.",
        "format": "markdown",
        "sha256": "c38753664abbe23a8d198bb93126f90718ed1cc63dc78bb6fab55c0c835c363e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The common-gate series stack is correctly modeled as a single weaker NMOS: for identical devices, β_eq = β/2, equivalent to an effective channel length about twice that of one device. The resistive-load analysis is consistent with the stated ideal assumptions; body effect is appropriately noted as a secondary correction.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 11012,
        "total_tokens": 12440,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 11012,
        "total_tokens": 12440,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume long-channel nMOS devices, same threshold \\(V_T\\), no body effect and no channel-length modulation. Let the intermediate node between \\(M_1\\) and \\(M_2\\) be \\(V_X\\), and define\n\n\\[\n\\beta_i=\\mu_n C_{ox}\\frac{W_i}{L_i},\\qquad\n\\beta_{eq}=\\left(\\frac{1}{\\beta_1}+\\frac{1}{\\beta_2}\\right)^{-1}\n=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}.\n\\]\n\nFor identical transistors, \\(\\beta_{eq}=\\beta/2\\), i.e. the pull-down behaves like one nMOS with twice the channel length.\n\n---\n\n## 1. Basic behavior\n\nBoth nMOS gates are tied to \\(V_{in}\\), so the circuit is a resistive-load nMOS inverter.\n\n- If \\(V_{in}<V_T\\), both devices are off:\n\n\\[\nI_D=0,\\qquad V_{out}=V_{DD}.\n\\]\n\n- If \\(V_{in}>V_T\\), the nMOS stack conducts and pulls \\(V_{out}\\) down through \\(R_D\\).\n\nThus the logic function is inversion:\n\n\\[\nV_{in}=0 \\Rightarrow V_{out}\\approx V_{DD},\n\\qquad\nV_{in}=V_{DD} \\Rightarrow V_{out}\\approx V_{OL}.\n\\]\n\nThe stack does not require \\(V_{in}>2V_T\\); conduction begins once \\(V_{in}>V_T\\).\n\n---\n\n## 2. Equivalent nMOS model\n\nLet\n\n\\[\nA=V_{in}-V_T.\n\\]\n\nFor \\(A>0\\), the two series transistors with tied gates behave like a single nMOS with parameter \\(\\beta_{eq}\\). Therefore,\n\n\\[\nI_D=\n\\begin{cases}\n\\dfrac{\\beta_{eq}}{2}A^2, & V_{out}\\ge A \\quad \\text{saturation} \\\\[1.2em]\n\\beta_{eq}\\left(A V_{out}-\\dfrac{V_{out}^2}{2}\\right), & V_{out}<A \\quad \\text{triode}\n\\end{cases}\n\\]\n\nand the resistor current is\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}.\n\\]\n\n---\n\n## 3. DC voltage transfer characteristic\n\n### Cutoff region\n\n\\[\nV_{in}\\le V_T:\n\\qquad\nV_{out}=V_{DD}.\n\\]\n\n---\n\n### Saturation region\n\nFor \\(V_{in}>V_T\\) and \\(V_{out}\\ge V_{in}-V_T\\),\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\frac{\\beta_{eq}}{2}(V_{in}-V_T)^2.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nV_{out}\n=\nV_{DD}\n-\n\\frac{R_D\\beta_{eq}}{2}(V_{in}-V_T)^2\n}\n\\]\n\nvalid while\n\n\\[\nV_{out}\\ge V_{in}-V_T.\n\\]\n\nThe boundary between saturation and triode occurs when\n\n\\[\nV_{out}=V_{in}-V_T=A.\n\\]\n\nSolving,\n\n\\[\nA_c=\n\\frac{\\sqrt{1+2R_D\\beta_{eq}V_{DD}}-1}\n{R_D\\beta_{eq}}.\n\\]\n\nSo the saturation expression is valid approximately for\n\n\\[\n0<A\\le A_c.\n\\]\n\n---\n\n### Triode region\n\nFor larger \\(V_{in}\\), \\(V_{out}<V_{in}-V_T\\), and the equivalent nMOS is in triode:\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\beta_{eq}\\left[(V_{in}-V_T)V_{out}-\\frac{V_{out}^2}{2}\\right].\n\\]\n\nSolving for the physically meaningful low-voltage root,\n\n\\[\n\\boxed{\nV_{out}\n=\n\\frac{\n1+R_D\\beta_{eq}(V_{in}-V_T)\n-\n\\sqrt{\n\\left[1+R_D\\beta_{eq}(V_{in}-V_T)\\right]^2\n-\n2R_D\\beta_{eq}V_{DD}\n}\n}\n{R_D\\beta_{eq}}\n}\n\\]\n\nvalid when\n\n\\[\nV_{out}<V_{in}-V_T.\n\\]\n\n---\n\n## 4. Internal node voltage\n\nIn the saturation branch, \\(M_1\\) is in triode and \\(M_2\\) is in saturation. The intermediate node is\n\n\\[\n\\boxed{\nV_X\n=\n(V_{in}-V_T)\n\\left(\n1-\\sqrt{\\frac{\\beta_1}{\\beta_1+\\beta_2}}\n\\right)\n}\n\\]\n\nFor identical devices,\n\n\\[\nV_X\n=\n\\left(1-\\frac{1}{\\sqrt{2}}\\right)(V_{in}-V_T)\n\\approx 0.293(V_{in}-V_T).\n\\]\n\n---\n\n## 5. Small-signal gain\n\nIn the saturation branch,\n\n\\[\ng_m=\\beta_{eq}(V_{in}-V_T),\n\\]\n\nso with ideal MOSFETs,\n\n\\[\n\\boxed{\nA_v=\\frac{dV_{out}}{dV_{in}}\n=\n-R_D\\beta_{eq}(V_{in}-V_T)\n}\n\\]\n\nFor identical devices,\n\n\\[\nA_v=-\\frac{1}{2}R_D\\beta(V_{in}-V_T).\n\\]\n\nThus the stacked pull-down has roughly half the transconductance of a single identical nMOS.\n\n---\n\n### Summary\n\nThe circuit is a resistive-load nMOS inverter whose pull-down device is a two-transistor stack. With ideal square-law MOSFETs, the stack is equivalent to one nMOS with\n\n\\[\n\\beta_{eq}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}.\n\\]\n\nFor identical transistors, the stack is equivalent to a single transistor with half the strength. Low input gives \\(V_{out}=V_{DD}\\); high input pulls the output low through the nMOS stack and \\(R_D\\), dissipating static power.",
        "format": "markdown",
        "sha256": "c8aa7ca209d48f21f0e70d5b19a3f8633c4135da7a89f95bcf894e2dc8dd0d8a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS stack as an effective longer-channel device: for equal widths, its strength is halved, equivalent to twice the channel length. It also correctly describes M1 operating in triode while M2 is saturated in the saturation branch; the added analysis is consistent with its stated ideal assumptions.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 13277,
        "total_tokens": 14705,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 13277,
        "total_tokens": 14705,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are matched NMOS devices, the tail current source is ideal, and the MOSFETs operate in saturation unless stated otherwise.\n\nLet the common-source node be \\(V_S\\), and define\n\n\\[\n\\Delta = V_{in}-V_b\n\\]\n\nThe circuit is a **source-coupled/differential pair** with a single-ended resistive load on the \\(M_2\\) side. \\(V_b\\) is the reference input, and \\(V_{in}\\) steers the tail current between \\(M_1\\) and \\(M_2\\).\n\n---\n\n## 1. Basic operation\n\nThe tail current is fixed:\n\n\\[\nI_{D1}+I_{D2}=I_1\n\\]\n\nThe output is determined by the current through \\(M_2\\):\n\n\\[\nV_{out}=V_{DD}-R_D I_{D2}\n\\]\n\nSo:\n\n- If \\(V_{in} < V_b\\), \\(M_2\\) has larger \\(V_{GS}\\), so \\(I_{D2}\\) increases and \\(V_{out}\\) decreases.\n- If \\(V_{in} > V_b\\), \\(M_1\\) steals current from \\(M_2\\), so \\(I_{D2}\\) decreases and \\(V_{out}\\) increases.\n- Therefore the circuit is **non-inverting** from \\(V_{in}\\) to \\(V_{out}\\).\n\nFor matched devices at \\(V_{in}=V_b\\):\n\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2}\n\\]\n\nand\n\n\\[\nV_{out,Q}=V_{DD}-\\frac{I_1R_D}{2}\n\\]\n\n---\n\n## 2. Large-signal transfer characteristic\n\nUsing the square-law model\n\n\\[\nI_D=\\frac{1}{2}\\beta\\left(V_{GS}-V_T\\right)^2\n\\]\n\nwhere\n\n\\[\n\\beta=\\mu_n C_{ox}\\frac{W}{L}\n\\]\n\nthe current in \\(M_2\\) is\n\n\\[\nI_{D2}=\n\\begin{cases}\nI_1, & \\Delta \\le -\\sqrt{\\frac{2I_1}{\\beta}} \\\\[6pt]\n\\dfrac{I_1}{2}\n-\\dfrac{\\beta \\Delta}{2}\n\\sqrt{\\dfrac{I_1}{\\beta}-\\dfrac{\\Delta^2}{4}},\n& |\\Delta|<\\sqrt{\\dfrac{2I_1}{\\beta}} \\\\[10pt]\n0, & \\Delta \\ge \\sqrt{\\frac{2I_1}{\\beta}}\n\\end{cases}\n\\]\n\nThus\n\n\\[\nV_{out}=V_{DD}-R_D I_{D2}\n\\]\n\nThe output limits are approximately\n\n\\[\nV_{OH}\\approx V_{DD}\n\\]\n\nwhen \\(M_2\\) is off, and\n\n\\[\nV_{OL}\\approx V_{DD}-I_1R_D\n\\]\n\nwhen \\(M_2\\) carries the entire tail current.\n\nSo the circuit behaves like a current-steering comparator/limiter centered around \\(V_{in}=V_b\\).\n\n---\n\n## 3. Small-signal gain\n\nFor small signals around a bias point where both transistors are on, \\(V_b\\) is AC ground. With an ideal tail current source,\n\n\\[\ni_{d1}+i_{d2}=0\n\\]\n\nThe small-signal source voltage is\n\n\\[\nv_s=\\frac{g_{m1}}{g_{m1}+g_{m2}}v_{in}\n\\]\n\nand the small-signal drain current of \\(M_2\\) is\n\n\\[\ni_{d2}\n=\n-\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}v_{in}\n\\]\n\nTherefore\n\n\\[\nv_{out}=-R_D i_{d2}\n\\]\n\nso the voltage gain is\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\n+\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D\n\\]\n\nFor matched devices biased at \\(V_{in}=V_b\\),\n\n\\[\ng_{m1}=g_{m2}=g_m\n\\]\n\nso\n\n\\[\nA_v=\\frac{g_m R_D}{2}\n\\]\n\nThe gain is positive, so the stage is non-inverting.\n\nIncluding channel-length modulation, the load is roughly\n\n\\[\nR_D \\parallel r_{o2}\n\\]\n\nso\n\n\\[\nA_v \\approx \\frac{g_m}{2}\\left(R_D \\parallel r_{o2}\\right)\n\\]\n\nat the balanced operating point.\n\n---\n\n## 4. Saturation and bias conditions\n\nFor the above equations to be valid, \\(M_1\\) and \\(M_2\\) should remain in saturation.\n\nFor \\(M_1\\):\n\n\\[\nV_{DD}\\ge V_{in}-V_T\n\\]\n\nFor \\(M_2\\):\n\n\\[\nV_{out}\\ge V_b-V_T\n\\]\n\nThe tail current source also needs enough voltage headroom at the common source node. At the balanced point,\n\n\\[\nV_S=V_b-V_T-\\sqrt{\\frac{I_1}{\\beta}}\n\\]\n\nso \\(V_b\\) must be high enough to keep the tail current source in compliance.\n\n---\n\n### Summary\n\nThis is a single-ended NMOS differential pair. It compares \\(V_{in}\\) with \\(V_b\\). Increasing \\(V_{in}\\) diverts current away from \\(M_2\\), reducing the drop across \\(R_D\\), so \\(V_{out}\\) increases. Around \\(V_{in}=V_b\\), the small-signal gain is approximately\n\n\\[\nA_v \\approx +\\frac{g_mR_D}{2}\n\\]\n\nfor matched devices.",
        "format": "markdown",
        "sha256": "2f013f8c9e9438d3dab36bf7cf54c04f30ef9ccdc2fdd0679ac7134d01f0ed92"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, with M2 gated by Vb and the output at its drain. The current steering, non-inverting sign, and small-signal gain are also consistent with the circuit.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 13793,
        "total_tokens": 16088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 13793,
        "total_tokens": 16088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1,M_2\\) are matched nMOS transistors, the tail current source is ideal, body effect and channel-length modulation are neglected, and both MOSFETs are in saturation unless stated otherwise.\n\nThis is essentially an nMOS differential/current-steering pair with a single-ended resistive load on the \\(M_2\\) side. \\(V_b\\) is the reference/bias input, and \\(V_{in}\\) steers the tail current \\(I_1\\) between \\(M_1\\) and \\(M_2\\).\n\n---\n\n## 1. Basic current relation\n\nThe tail current is fixed:\n\n\\[\nI_{D1}+I_{D2}=I_1\n\\]\n\nThe output is set by the current through \\(M_2\\):\n\n\\[\nV_{out}=V_{DD}-I_{D2}R_D\n\\]\n\nSo if \\(M_2\\) current increases, \\(V_{out}\\) falls. If \\(M_2\\) current decreases, \\(V_{out}\\) rises.\n\n---\n\n## 2. DC transfer characteristic\n\nLet\n\n\\[\n\\Delta V = V_{in}-V_b\n\\]\n\nand use the square-law saturation model\n\n\\[\nI_D=\\frac{\\beta}{2}(V_{GS}-V_T)^2\n\\]\n\nwhere\n\n\\[\n\\beta = \\mu_n C_{ox}\\frac{W}{L}\n\\]\n\nFor both transistors on and saturated,\n\n\\[\nI_{D2}\n=\n\\frac{I_1}{2}\n-\n\\frac{\\beta}{4}\\Delta V\n\\sqrt{\\frac{4I_1}{\\beta}-\\Delta V^2}\n\\]\n\nThus\n\n\\[\n\\boxed{\nV_{out}\n=\nV_{DD}\n-\nR_D\n\\left[\n\\frac{I_1}{2}\n-\n\\frac{\\beta}{4}\\Delta V\n\\sqrt{\\frac{4I_1}{\\beta}-\\Delta V^2}\n\\right]\n}\n\\]\n\nvalid while both devices conduct.\n\nAt balance,\n\n\\[\nV_{in}=V_b\n\\]\n\nso the tail current splits equally:\n\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2}\n\\]\n\nand\n\n\\[\n\\boxed{\nV_{out,Q}=V_{DD}-\\frac{I_1R_D}{2}\n}\n\\]\n\n---\n\n## 3. Large-signal limiting behavior\n\nThe differential pair fully steers the current when\n\n\\[\n|\\Delta V| \\ge \\sqrt{\\frac{2I_1}{\\beta}}\n\\]\n\nTherefore:\n\n### If \\(V_{in}\\gg V_b\\)\n\n\\(M_1\\) takes nearly all the tail current:\n\n\\[\nI_{D1}\\approx I_1,\\qquad I_{D2}\\approx 0\n\\]\n\nso\n\n\\[\n\\boxed{V_{out}\\approx V_{DD}}\n\\]\n\n### If \\(V_{in}\\ll V_b\\)\n\n\\(M_2\\) takes nearly all the tail current:\n\n\\[\nI_{D2}\\approx I_1\n\\]\n\nso\n\n\\[\n\\boxed{V_{out}\\approx V_{DD}-I_1R_D}\n\\]\n\nThus the output voltage range is approximately\n\n\\[\n\\boxed{\nV_{DD}-I_1R_D \\le V_{out} \\le V_{DD}\n}\n\\]\n\nsubject to MOSFET saturation and current-source compliance.\n\n---\n\n## 4. Small-signal gain\n\nAround a bias point, let the small-signal transconductances be \\(g_{m1}\\) and \\(g_{m2}\\). With an ideal tail current source,\n\n\\[\nv_s=\\frac{g_{m1}v_{in}+g_{m2}v_b}{g_{m1}+g_{m2}}\n\\]\n\nThe small-signal current change in \\(M_2\\) is\n\n\\[\ni_{d2}\n=\n\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\n\\left(v_b-v_{in}\\right)\n\\]\n\nSince\n\n\\[\nv_{out}=-R_D i_{d2}\n\\]\n\nwe get\n\n\\[\n\\boxed{\nv_{out}\n=\nR_D\n\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\n\\left(v_{in}-v_b\\right)\n}\n\\]\n\nIf \\(V_b\\) is AC ground and the pair is balanced, then\n\n\\[\ng_{m1}=g_{m2}=g_m\n\\]\n\nso\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n+\\frac{g_mR_D}{2}\n}\n\\]\n\nThe gain is positive: increasing \\(V_{in}\\) steals current from \\(M_2\\), reducing the drop across \\(R_D\\), so \\(V_{out}\\) rises.\n\n---\n\n## 5. Saturation conditions\n\nFor the equations above to hold:\n\n### \\(M_1\\) saturation\n\n\\[\nV_{D1} \\ge V_{G1}-V_T\n\\]\n\nSince \\(V_{D1}=V_{DD}\\),\n\n\\[\n\\boxed{\nV_{DD}\\ge V_{in}-V_T\n}\n\\]\n\nUsually this is easily satisfied.\n\n### \\(M_2\\) saturation\n\n\\[\nV_{out}\\ge V_b-V_T\n\\]\n\nSince\n\n\\[\nV_{out}=V_{DD}-I_{D2}R_D\n\\]\n\nthe worst case is when \\(I_{D2}\\approx I_1\\), requiring\n\n\\[\n\\boxed{\nV_{DD}-I_1R_D \\ge V_b-V_T\n}\n\\]\n\nIf this is not satisfied, \\(M_2\\) enters triode and the simple square-law saturation analysis is no longer valid.\n\n---\n\n## Summary\n\nThe circuit is a single-ended-output nMOS differential pair. \\(V_b\\) sets the reference point. Around \\(V_{in}=V_b\\), the output is\n\n\\[\nV_{out,Q}=V_{DD}-\\frac{I_1R_D}{2}\n\\]\n\nand the small-signal voltage gain is approximately\n\n\\[\n\\boxed{\nA_v \\approx +\\frac{g_mR_D}{2}\n}\n\\]\n\nIncreasing \\(V_{in}\\) increases \\(V_{out}\\); decreasing \\(V_{in}\\) lowers \\(V_{out}\\). The output swings approximately between\n\n\\[\nV_{DD}-I_1R_D\n\\]\n\nand\n\n\\[\nV_{DD}\n\\]\n\nas the tail current is steered between \\(M_2\\) and \\(M_1\\).",
        "format": "markdown",
        "sha256": "95e882f28001109dbdf2db40716aee72e5e64355d90810bd3a24a12194a5ec5a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a source-coupled differential/current-steering pair, with Vb as the reference and the M2 branch driving the output. The derived gain is non-inverting and correct for the stated assumptions.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2295,
        "output_tokens": 10753,
        "total_tokens": 13048,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2295,
        "output_tokens": 10753,
        "total_tokens": 13048,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are matched NMOS devices, the tail current source \\(I_1\\) is ideal, and the MOSFETs operate in saturation unless stated otherwise.\n\nThis is a source-coupled pair/current-steering stage. \\(V_{in}\\) is compared against the reference/bias \\(V_b\\). The tail current \\(I_1\\) is steered between \\(M_1\\) and \\(M_2\\). Since only \\(M_2\\)’s drain current flows through \\(R_D\\),\n\n\\[\nV_{out}=V_{DD}-I_{D2}R_D\n\\]\n\nso increasing \\(I_{D2}\\) pulls \\(V_{out}\\) down.\n\n---\n\n## 1. Qualitative operation\n\n- If \\(V_{in}\\ll V_b\\):  \n  \\(M_2\\) takes almost all the tail current.\n\n  \\[\n  I_{D2}\\approx I_1\n  \\]\n\n  hence\n\n  \\[\n  V_{out}\\approx V_{DD}-I_1R_D\n  \\]\n\n- If \\(V_{in}=V_b\\):  \n  for matched devices,\n\n  \\[\n  I_{D1}=I_{D2}=\\frac{I_1}{2}\n  \\]\n\n  therefore\n\n  \\[\n  V_{out,Q}=V_{DD}-\\frac{I_1R_D}{2}\n  \\]\n\n- If \\(V_{in}\\gg V_b\\):  \n  \\(M_1\\) takes almost all the tail current and \\(M_2\\) turns off.\n\n  \\[\n  I_{D2}\\approx 0\n  \\]\n\n  hence\n\n  \\[\n  V_{out}\\approx V_{DD}\n  \\]\n\nSo the circuit is non-inverting with respect to \\(V_{in}\\): increasing \\(V_{in}\\) increases \\(V_{out}\\).\n\n---\n\n## 2. Large-signal transfer characteristic\n\nUsing the square-law model\n\n\\[\nI_D=\\frac{1}{2}\\beta V_{OV}^2\n\\]\n\nand defining\n\n\\[\n\\Delta V = V_{in}-V_b\n\\]\n\nthe current through \\(M_2\\) is\n\n\\[\nI_{D2}\n=\n\\frac{I_1}{2}\n-\n\\frac{\\beta \\Delta V}{4}\n\\sqrt{\\frac{4I_1}{\\beta}-(\\Delta V)^2}\n\\]\n\nfor the region where both transistors conduct:\n\n\\[\n|\\Delta V| \\le \\sqrt{\\frac{2I_1}{\\beta}}\n\\]\n\nThus\n\n\\[\nV_{out}\n=\nV_{DD}\n-\nR_D\n\\left[\n\\frac{I_1}{2}\n-\n\\frac{\\beta \\Delta V}{4}\n\\sqrt{\\frac{4I_1}{\\beta}-(\\Delta V)^2}\n\\right]\n\\]\n\nFor large differential input, one transistor turns off:\n\n\\[\nI_{D2}=\n\\begin{cases}\nI_1, & V_{in}-V_b \\le -\\sqrt{\\dfrac{2I_1}{\\beta}} \\\\\n0, & V_{in}-V_b \\ge +\\sqrt{\\dfrac{2I_1}{\\beta}}\n\\end{cases}\n\\]\n\nTherefore,\n\n\\[\nV_{out}=\n\\begin{cases}\nV_{DD}-I_1R_D, & V_{in}\\ll V_b \\\\\nV_{DD}, & V_{in}\\gg V_b\n\\end{cases}\n\\]\n\n---\n\n## 3. Small-signal gain\n\nAround a bias point, neglecting \\(r_o\\), the small-signal source node voltage is\n\n\\[\nv_s=\\frac{g_{m1}}{g_{m1}+g_{m2}}v_{in}\n\\]\n\nbecause \\(V_b\\) is AC-grounded.\n\nThe small-signal drain current of \\(M_2\\) is\n\n\\[\ni_{d2}=-g_{m2}v_s\n\\]\n\nso\n\n\\[\nv_{out}=g_{m2}R_Dv_s\n\\]\n\nThus the voltage gain is\n\n\\[\nA_v\n=\n\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D\n\\]\n\nAt the symmetric bias point \\(V_{in}=V_b\\), for matched devices,\n\n\\[\ng_{m1}=g_{m2}=g_m\n\\]\n\nso\n\n\\[\nA_v=\\frac{g_mR_D}{2}\n\\]\n\nwhere\n\n\\[\ng_m=\\sqrt{\\beta I_1}\n\\]\n\nbecause each device carries \\(I_1/2\\).\n\nTherefore,\n\n\\[\n\\boxed{A_v=\\frac{R_D}{2}\\sqrt{\\beta I_1}}\n\\]\n\nfor the balanced operating point.\n\n---\n\n## 4. Output swing\n\nThe ideal output range is approximately\n\n\\[\nV_{DD}-I_1R_D \\le V_{out} \\le V_{DD}\n\\]\n\nThe low output level occurs when \\(M_2\\) carries the full tail current. The high output level occurs when \\(M_2\\) is off.\n\nTo keep \\(M_2\\) in saturation, approximately,\n\n\\[\nV_{out} \\ge V_b - V_T\n\\]\n\nso a useful design constraint is\n\n\\[\nV_{DD}-I_1R_D \\gtrsim V_b - V_T\n\\]\n\n---\n\n## 5. Summary\n\nThe circuit is a differential-pair/current-steering stage with a single resistive load. It compares \\(V_{in}\\) to \\(V_b\\).\n\n\\[\n\\boxed{V_{out}=V_{DD}-I_{D2}R_D}\n\\]\n\n- \\(V_{in}<V_b\\): \\(M_2\\) on, \\(V_{out}\\) low  \n- \\(V_{in}=V_b\\): \\(I_{D2}=I_1/2\\), \\(V_{out}=V_{DD}-I_1R_D/2\\)  \n- \\(V_{in}>V_b\\): \\(M_2\\) off, \\(V_{out}\\) high  \n\nSmall-signal gain at balance:\n\n\\[\n\\boxed{A_v\\approx +\\frac{g_mR_D}{2}}\n\\]\n\nSo it behaves as a non-inverting amplifier/comparator whose switching point is set by \\(V_b\\).",
        "format": "markdown",
        "sha256": "85a5200de103a6598aeeb907b71450b8d2a1dac30e338ea2e08e3f732b4470c1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair with M2 biased at Vb and the output at M2’s drain. The current steering, non-inverting gain, and small-signal expression are consistent with the golden solution.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2295,
        "output_tokens": 8652,
        "total_tokens": 10947,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2295,
        "output_tokens": 8652,
        "total_tokens": 10947,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For output impedance, set the input source to ac ground. Then the gate of \\(M_1\\) is not an ideal ac ground; it is connected to ground through \\(R_S\\). The parasitic gate-source capacitance \\(C_{gs1}\\) couples output/source-node motion back to the gate, and \\(R_S\\) converts that capacitive current into a delayed gate-voltage variation. This frequency-dependent feedback can make the small-signal current at the output lag the output voltage, i.e. the output impedance has a positive imaginary part like an inductor.\n\nIgnoring \\(r_o\\), body effect, and other capacitances, apply a test voltage \\(v_x\\) at \\(V_{out}\\). The gate voltage is set by the divider formed by \\(R_S\\) and \\(C_{gs}\\):\n\n\\[\nv_g=\\frac{sR_SC_{gs}}{1+sR_SC_{gs}}v_x .\n\\]\n\nThe small-signal current drawn by \\(M_1\\) from the output node is\n\n\\[\ni_x=(g_m+sC_{gs})(v_x-v_g).\n\\]\n\nTherefore\n\n\\[\nZ_{out}=\\frac{v_x}{i_x}\n=\\frac{1+sR_SC_{gs}}{g_m+sC_{gs}}.\n\\]\n\nWith \\(s=j\\omega\\),\n\n\\[\nZ_{out}\n=\\frac{1+j\\omega R_SC_{gs}}{g_m+j\\omega C_{gs}}.\n\\]\n\nThe imaginary part is proportional to\n\n\\[\n\\omega C_{gs}(g_mR_S-1).\n\\]\n\nSo if\n\n\\[\ng_mR_S>1,\n\\]\n\nthen\n\n\\[\n\\operatorname{Im}\\{Z_{out}\\}>0,\n\\]\n\nwhich is an inductive impedance.\n\nAt low-to-moderate frequencies,\n\n\\[\nZ_{out}\\approx \\frac{1}{g_m}\n+s\\frac{C_{gs}}{g_m}\\left(R_S-\\frac{1}{g_m}\\right).\n\\]\n\nThus the output looks approximately like\n\n\\[\nZ_{out}\\approx \\frac{1}{g_m}+sL_{eq},\n\\]\n\nwith\n\n\\[\nL_{eq}\\approx \\frac{R_SC_{gs}}{g_m}\n\\quad \\text{if } R_S\\gg \\frac{1}{g_m}.\n\\]\n\nPhysically, \\(C_{gs}\\) feeds changes in \\(V_{out}\\) back to the gate, while \\(R_S\\) introduces a phase shift. The source follower’s transconductance then transforms that RC phase shift into an effective inductance at the output.",
        "format": "markdown",
        "sha256": "d54830d8461a4dcf6d8b3a84a3aadef46836926cf423316f6497ef7c73f00847"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the output impedance and shows it is inductive when \\(g_mR_S>1\\), with the right \\(C_{gs}\\)-\\(R_S\\) feedback mechanism and equivalent inductance. The expression also implies the correct low- and high-frequency limits.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 4700,
        "total_tokens": 6290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 4700,
        "total_tokens": 6290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For output-impedance calculation, set the independent input source to ac ground, so the gate of \\(M_1\\) is not at an ideal ac ground; it is grounded through \\(R_S\\). The output node is the source of \\(M_1\\), and it is coupled back to the gate through \\(C_{gs}\\). That feedback path can synthesize an inductance.\n\nIgnoring \\(r_o\\), body effect, and other parasitic capacitances for clarity, apply a test voltage \\(v_x\\) at \\(V_{out}\\). Let the gate voltage be \\(v_g\\). Gate KCL gives\n\n\\[\n\\frac{v_g}{R_S}+sC_{gs}(v_g-v_x)=0\n\\]\n\nso\n\n\\[\n\\frac{v_g}{v_x}=\\frac{sR_SC_{gs}}{1+sR_SC_{gs}} .\n\\]\n\nThe output current entering the source of \\(M_1\\) is approximately\n\n\\[\ni_x=(g_m+sC_{gs})(v_x-v_g).\n\\]\n\nTherefore,\n\n\\[\nY_{out}=\\frac{i_x}{v_x}\n=\\frac{g_m+sC_{gs}}{1+sR_SC_{gs}},\n\\]\n\nand\n\n\\[\nZ_{out}=\\frac{1+sR_SC_{gs}}{g_m+sC_{gs}}.\n\\]\n\nFor frequencies well below the transistor \\(f_T\\), i.e. \\(\\omega C_{gs}\\ll g_m\\),\n\n\\[\nZ_{out}\\approx \\frac{1}{g_m}+s\\frac{R_SC_{gs}}{g_m}.\n\\]\n\nThis has the form\n\n\\[\nZ_{out}\\approx R_{eq}+sL_{eq},\n\\]\n\nwith\n\n\\[\nR_{eq}\\approx \\frac{1}{g_m}, \\qquad\nL_{eq}\\approx \\frac{R_SC_{gs}}{g_m}.\n\\]\n\nSo the finite source resistance \\(R_S\\), together with \\(C_{gs}\\) and the transconductance \\(g_m\\), creates an active or synthetic inductance at the output.\n\nMore exactly,\n\n\\[\n\\operatorname{Im}\\{Z_{out}\\}\n=\n\\frac{\\omega C_{gs}(g_mR_S-1)}\n{g_m^2+(\\omega C_{gs})^2},\n\\]\n\nso the output impedance is inductive when\n\n\\[\ng_mR_S>1.\n\\]\n\nPhysically: an output voltage variation couples through \\(C_{gs}\\) to the gate; because the gate returns to ac ground only through \\(R_S\\), the gate voltage is phase-shifted. The resulting \\(g_m v_{gs}\\) current can lag the output voltage, giving a positive reactance—i.e. an inductive-looking output impedance. M2 and other parasitics add parallel conductance/capacitance, but they do not change the basic mechanism.",
        "format": "markdown",
        "sha256": "d150bcbcc0d4b74161e49b4cb96fdc3fd85c73aad6bb1e1a2048107b78d5d775"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The topology, exact output-impedance expression, and inductive condition are correct. However, the stated low-frequency inductance approximation omits the denominator’s first-order term: it should be approximately \\(C_{gs}(R_S-1/g_m)/g_m\\), not \\(R_SC_{gs}/g_m\\). The high-frequency limit is also not explicitly explained.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 10461,
        "total_tokens": 12051,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 10461,
        "total_tokens": 12051,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a source follower. Its output impedance can look inductive because the gate of \\(M_1\\) is not an ideal ac ground: it is connected to ground through the finite source resistance \\(R_S\\), and \\(C_{gs1}\\) feeds output motion back to the gate.\n\nTo find \\(Z_{out}\\), set \\(V_{in}\\), \\(V_b\\), and \\(V_{DD}\\) to ac ground and apply a test voltage \\(v_o\\) at the output. Ignoring \\(r_o\\) and other capacitances for clarity, the gate node satisfies\n\n\\[\n\\frac{v_g}{R_S}+sC_{gs}(v_g-v_o)=0\n\\]\n\nso\n\n\\[\n\\frac{v_g}{v_o}=\\frac{sR_SC_{gs}}{1+sR_SC_{gs}}.\n\\]\n\nThe current drawn at the output through \\(M_1\\) is\n\n\\[\ni_o=(g_m+sC_{gs})(v_o-v_g),\n\\]\n\ntherefore\n\n\\[\nY_{out}=\\frac{i_o}{v_o}\n= \\frac{g_m+sC_{gs}}{1+sR_SC_{gs}},\n\\]\n\nand\n\n\\[\nZ_{out}=\\frac{1+sR_SC_{gs}}{g_m+sC_{gs}}\n=\\frac{1}{g_m}\\frac{1+sR_SC_{gs}}{1+sC_{gs}/g_m}.\n\\]\n\nFor \\(s=j\\omega\\),\n\n\\[\n\\operatorname{Im}\\{Z_{out}\\}\n=\n\\frac{\\omega C_{gs}(g_mR_S-1)}\n{g_m^2+\\omega^2 C_{gs}^2}.\n\\]\n\nThus, if\n\n\\[\ng_mR_S>1,\n\\]\n\nthe imaginary part of \\(Z_{out}\\) is positive, which means the output impedance is inductive.\n\nEquivalently, at low frequency,\n\n\\[\nZ_{out}\\approx \\frac{1}{g_m}\n+s\\frac{C_{gs}(g_mR_S-1)}{g_m^2}\n\\]\n\nso it looks like\n\n\\[\nZ_{out}\\approx R_{out}+sL_{\\text{eq}},\n\\]\n\nwith\n\n\\[\nL_{\\text{eq}}=\\frac{C_{gs}(g_mR_S-1)}{g_m^2}.\n\\]\n\nPhysically: a change in \\(v_{out}\\) drives current through \\(C_{gs}\\), producing a delayed gate-voltage change across \\(R_S\\). The transistor converts that gate-voltage change into an output current through \\(g_m\\). When this transconductance-generated reactive current dominates the direct capacitive current, the net output current lags the output voltage, so the impedance looks inductive. Additional capacitances and \\(r_o\\)’s from \\(M_1\\) and \\(M_2\\) can modify or mask the effect, but the basic cause is the \\(R_S-C_{gs}-g_m\\) feedback path.",
        "format": "markdown",
        "sha256": "2dc36e2a7603fe8882d57be34368b4fe2105f54c370de64fac0c60f1e1be3702"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the output impedance, showing it is inductive when g_m R_S > 1 (equivalently R_S > 1/g_m). The low-frequency equivalent inductance and physical C_gs feedback explanation are also correct.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 13069,
        "total_tokens": 14659,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12423,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 13069,
        "total_tokens": 14659,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12423,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume both MOSFETs are NMOS, sources at ground, and \\(I_{in}\\) is positive injected into node \\(X\\).\n\n## 1. Circuit topology\n\n- \\(M_1\\): common-source NMOS with drain load \\(R_{D1}\\).  \n  Gate \\(=X\\), drain \\(=V_{out}\\), source \\(=0\\).\n\n- \\(M_2\\): NMOS current sink connected from node \\(X\\) to ground.  \n  Gate \\(=V_{out}\\), drain \\(=X\\), source \\(=0\\).\n\nThus the circuit is cross-coupled: \\(X\\) controls \\(V_{out}\\) through \\(M_1\\), and \\(V_{out}\\) controls the current removed from \\(X\\) through \\(M_2\\).\n\n---\n\n## 2. DC equations\n\nBecause MOS gates draw essentially no DC current,\n\n\\[\nI_{in}=I_{D2}\n\\]\n\nand at the output node,\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_{D1}}=I_{D1}\n\\]\n\nSo the DC operating point is determined by\n\n\\[\nI_{in}=I_{D2}(V_{GS2}=V_{out},\\,V_{DS2}=V_X)\n\\]\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_{D1}}\n=\nI_{D1}(V_{GS1}=V_X,\\,V_{DS1}=V_{out})\n\\]\n\nIf both transistors are in saturation and channel-length modulation is neglected,\n\n\\[\nI_{in}=\\frac{1}{2}\\beta_2(V_{out}-V_{T2})^2\n\\]\n\nso\n\n\\[\n\\boxed{V_{out}=V_{T2}+\\sqrt{\\frac{2I_{in}}{\\beta_2}}}\n\\]\n\nAlso,\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_{D1}}\n=\n\\frac{1}{2}\\beta_1(V_X-V_{T1})^2\n\\]\n\nso\n\n\\[\n\\boxed{\nV_X\n=\nV_{T1}\n+\n\\sqrt{\n\\frac{2(V_{DD}-V_{out})}{\\beta_1R_{D1}}\n}\n}\n\\]\n\nThese expressions are valid only if the saturation conditions are satisfied:\n\n\\[\nV_{out}\\ge V_X-V_{T1}\n\\]\n\n\\[\nV_X\\ge V_{out}-V_{T2}\n\\]\n\n---\n\n## 3. Small-signal analysis\n\nLet\n\n\\[\nG_D=\\frac{1}{R_{D1}}+g_{ds1}\n\\]\n\nwhere \\(g_{ds1}=1/r_{o1}\\). Also let \\(g_{ds2}=1/r_{o2}\\).\n\nAt the output node,\n\n\\[\nG_Dv_{out}+g_{m1}v_X=0\n\\]\n\nso\n\n\\[\nv_{out}=-\\frac{g_{m1}}{G_D}v_X\n\\]\n\nAt node \\(X\\),\n\n\\[\ni_{in}=g_{ds2}v_X+g_{m2}v_{out}\n\\]\n\nSubstituting for \\(v_{out}\\),\n\n\\[\ni_{in}\n=\n\\left(\ng_{ds2}\n-\n\\frac{g_{m1}g_{m2}}{G_D}\n\\right)v_X\n\\]\n\nTherefore the small-signal input resistance is\n\n\\[\n\\boxed{\nR_{in}\n=\n\\frac{v_X}{i_{in}}\n=\n\\frac{1}{\ng_{ds2}\n-\n\\dfrac{g_{m1}g_{m2}}{G_D}\n}\n}\n\\]\n\nand the transimpedance gain is\n\n\\[\n\\boxed{\n\\frac{v_{out}}{i_{in}}\n=\n-\\frac{g_{m1}}{G_Dg_{ds2}-g_{m1}g_{m2}}\n}\n\\]\n\nIf \\(r_{o2}\\to\\infty\\), i.e. \\(g_{ds2}\\approx 0\\),\n\n\\[\n\\boxed{\n\\frac{v_{out}}{i_{in}}\\approx \\frac{1}{g_{m2}}\n}\n\\]\n\nand\n\n\\[\n\\boxed{\nR_{in}\\approx -\\frac{G_D}{g_{m1}g_{m2}}\n}\n\\]\n\nSo the input resistance can be negative.\n\n---\n\n## 4. Important stability observation\n\nBoth \\(M_1\\) and \\(M_2\\) act as common-source inverting stages. Therefore the loop has positive feedback.\n\nA small increase in \\(v_X\\) tends to reduce \\(v_{out}\\), which reduces the current sunk by \\(M_2\\), which lets \\(v_X\\) rise further. That is regenerative behavior.\n\nThe small-signal operating point is stable only if\n\n\\[\n\\boxed{\nG_Dg_{ds2}>g_{m1}g_{m2}\n}\n\\]\n\nIf\n\n\\[\ng_{m1}g_{m2}>G_Dg_{ds2}\n\\]\n\nthen the circuit presents a negative input resistance and the bias point is potentially unstable or bistable. In practice, with \\(M_2\\) in saturation, \\(g_{ds2}\\) is usually small, so the circuit tends to be regenerative unless additional damping or feedback is added.",
        "format": "markdown",
        "sha256": "3de6418427d4e5e8b514cb744898673016b69b9ad6c1d4d3dee9fd2f526f3ec0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection and the positive-feedback loop, and derives the loop-modified input resistance, including the negative-resistance and instability condition. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 12545,
        "total_tokens": 14602,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 12545,
        "total_tokens": 14602,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume the MOSFETs are nMOS devices with sources at ground, and interpret the drawing as:\n\n- \\(M_1\\): gate at node \\(X\\), drain at \\(V_{out}\\), source at ground.\n- \\(M_2\\): gate at \\(V_{out}\\), drain at node \\(X\\), source at ground.\n- \\(R_{D1}\\) connects \\(V_{out}\\) to \\(V_{DD}\\).\n- \\(I_{in}\\) is injected into node \\(X\\).\n\n---\n\n## 1. DC operating-point equations\n\nSince MOS gate current is ideally zero, the dc input current must flow through \\(M_2\\):\n\n\\[\nI_{in}=I_{D2}\n\\]\n\nAlso, the current through \\(R_{D1}\\) must equal the drain current of \\(M_1\\):\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_{D1}}=I_{D1}\n\\]\n\nThus, in general,\n\n\\[\nI_{in}=I_{D2}(V_{GS2}=V_{out},\\,V_{DS2}=V_X)\n\\]\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_{D1}}\n=\nI_{D1}(V_{GS1}=V_X,\\,V_{DS1}=V_{out})\n\\]\n\nIf both transistors are in saturation and channel-length modulation is ignored,\n\n\\[\nI_{in}\n=\n\\frac{1}{2}\\beta_2\\left(V_{out}-V_{T2}\\right)^2\n\\]\n\nso\n\n\\[\nV_{out}\n=\nV_{T2}+\\sqrt{\\frac{2I_{in}}{\\beta_2}}\n\\]\n\nand\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_{D1}}\n=\n\\frac{1}{2}\\beta_1\\left(V_X-V_{T1}\\right)^2\n\\]\n\nso\n\n\\[\nV_X\n=\nV_{T1}\n+\n\\sqrt{\n\\frac{2\\left(V_{DD}-V_{out}\\right)}\n{\\beta_1R_{D1}}\n}\n\\]\n\nThe saturation conditions are\n\n\\[\nV_{out}\\ge V_X-V_{T1}\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nV_X\\ge V_{out}-V_{T2}\n\\]\n\nfor \\(M_2\\).\n\n---\n\n## 2. Small-signal analysis\n\nLet \\(v_x\\), \\(v_o\\), and \\(i_{in}\\) be small-signal quantities. Define\n\n\\[\nG_1=\\frac{1}{R_{D1}}+g_{o1}\n\\]\n\nwhere \\(g_{o1}=1/r_{o1}\\).\n\nAt the output node,\n\n\\[\nG_1v_o+g_{m1}v_x=0\n\\]\n\nso\n\n\\[\n\\frac{v_o}{v_x}\n=\n-\\frac{g_{m1}}{G_1}\n\\]\n\nAt the input node \\(X\\),\n\n\\[\ni_{in}=g_{o2}v_x+g_{m2}v_o\n\\]\n\nSubstituting \\(v_o\\),\n\n\\[\ni_{in}\n=\n\\left(\ng_{o2}\n-\n\\frac{g_{m1}g_{m2}}{G_1}\n\\right)v_x\n\\]\n\nTherefore the small-signal input resistance is\n\n\\[\nR_{in}\n=\n\\frac{v_x}{i_{in}}\n=\n\\frac{1}{\ng_{o2}\n-\n\\dfrac{g_{m1}g_{m2}}{G_1}\n}\n\\]\n\nand the transimpedance gain is\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}\n=\n\\frac{g_{m1}}\n{g_{m1}g_{m2}-G_1g_{o2}}\n}\n\\]\n\nIf \\(r_{o2}\\to \\infty\\), i.e. \\(g_{o2}\\approx 0\\),\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}\\approx \\frac{1}{g_{m2}}\n}\n\\]\n\nand\n\n\\[\n\\boxed{\nR_{in}\n\\approx\n-\\frac{G_1}{g_{m1}g_{m2}}\n}\n\\]\n\nSo the input resistance is negative.\n\n---\n\n## 3. Important qualitative result\n\nThe loop is regenerative. A small increase in \\(v_X\\) increases \\(I_{D1}\\), which pulls \\(V_{out}\\) down. A smaller \\(V_{out}\\) reduces \\(I_{D2}\\), so less current is removed from node \\(X\\), causing \\(v_X\\) to rise further.\n\nThus the circuit has positive feedback.\n\nFor a stable small-signal operating point, approximately,\n\n\\[\ng_{o2}G_1 > g_{m1}g_{m2}\n\\]\n\nmust hold. In saturation, \\(g_{o2}\\) is usually small, so this condition is often not satisfied. Therefore, as drawn, the circuit tends to behave like a negative-resistance/latch-like structure rather than a robust linear current-to-voltage amplifier.",
        "format": "markdown",
        "sha256": "66393eaf365526a73139b4678cc0bca5ee89a78206c4d3491e411b22fc6fa10d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as tied to Vout, explains the positive-feedback loop, and derives a negative input resistance and likely instability/latch-like behavior. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 12504,
        "total_tokens": 14561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 12504,
        "total_tokens": 14561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are NMOS devices with grounded sources, and define the input current \\(I_{in}\\) as positive upward into node \\(X\\).\n\nLet\n\n\\[\nV_X = \\text{voltage at node X}, \\qquad V_o = V_{out}.\n\\]\n\n## 1. DC operating point\n\nSince the gate of \\(M_1\\) draws essentially zero DC current, the input current must be sunk by \\(M_2\\):\n\n\\[\nI_{in}=I_{D2}\n\\]\n\nand at the output node,\n\n\\[\nI_{D1}=\\frac{V_{DD}-V_o}{R_{D1}}.\n\\]\n\nThus, in general,\n\n\\[\nI_{in}=I_{D2}(V_{GS2}=V_o,\\; V_{DS2}=V_X)\n\\]\n\n\\[\n\\frac{V_{DD}-V_o}{R_{D1}}\n=\nI_{D1}(V_{GS1}=V_X,\\; V_{DS1}=V_o).\n\\]\n\nIf both transistors are in saturation and channel-length modulation is neglected,\n\n\\[\nI_D=\\frac{1}{2}\\beta (V_{GS}-V_T)^2\n\\]\n\nso\n\n\\[\nI_{in}=\\frac{1}{2}\\beta_2 (V_o-V_{T2})^2\n\\]\n\nand\n\n\\[\n\\frac{V_{DD}-V_o}{R_{D1}}\n=\n\\frac{1}{2}\\beta_1 (V_X-V_{T1})^2.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{V_o=V_{T2}+\\sqrt{\\frac{2I_{in}}{\\beta_2}}}\n\\]\n\nand\n\n\\[\n\\boxed{\nV_X\n=\nV_{T1}\n+\n\\sqrt{\n\\frac{2(V_{DD}-V_o)}{\\beta_1R_{D1}}\n}\n}\n\\]\n\nprovided the saturation conditions hold:\n\n\\[\nV_o \\ge V_X-V_{T1}\n\\]\n\n\\[\nV_X \\ge V_o-V_{T2}.\n\\]\n\nIf these conditions fail, one or both MOSFETs enter triode/cutoff and the above equations no longer apply.\n\n---\n\n## 2. Small-signal analysis\n\nLet \\(g_{m1}, g_{m2}\\) be the transconductances and \\(g_{o1}, g_{o2}\\) the output conductances at the bias point. With \\(V_{DD}\\) as AC ground, define\n\n\\[\nG_D=\\frac{1}{R_{D1}}+g_{o1}.\n\\]\n\nAt the output node,\n\n\\[\nG_D v_o + g_{m1}v_x=0\n\\]\n\nso\n\n\\[\nv_o=-\\frac{g_{m1}}{G_D}v_x.\n\\]\n\nAt node \\(X\\),\n\n\\[\ni_{in}=g_{o2}v_x+g_{m2}v_o.\n\\]\n\nSubstituting for \\(v_o\\),\n\n\\[\ni_{in}\n=\n\\left(\ng_{o2}\n-\n\\frac{g_{m1}g_{m2}}{G_D}\n\\right)v_x.\n\\]\n\nThus the small-signal input resistance is\n\n\\[\n\\boxed{\nR_{in}\n=\n\\frac{v_x}{i_{in}}\n=\n\\frac{1}{\ng_{o2}-\\dfrac{g_{m1}g_{m2}}{G_D}\n}\n}\n\\]\n\nand the transimpedance gain is\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}\n=\n\\frac{g_{m1}}{g_{m1}g_{m2}-G_Dg_{o2}}\n}\n\\]\n\nFor the ideal case \\(g_{o1},g_{o2}\\to 0\\),\n\n\\[\nG_D \\approx \\frac{1}{R_{D1}}\n\\]\n\nand therefore\n\n\\[\n\\boxed{\nR_{in}\\approx -\\frac{1}{g_{m1}g_{m2}R_{D1}}\n}\n\\]\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}\\approx \\frac{1}{g_{m2}}\n}\n\\]\n\nSo small-signal-wise, the output voltage changes approximately as\n\n\\[\nv_o \\approx \\frac{i_{in}}{g_{m2}}.\n\\]\n\n---\n\n## 3. Important feedback/stability observation\n\nThe circuit contains two common-source inversions:\n\n\\[\nV_X \\uparrow \\Rightarrow I_{D1}\\uparrow \\Rightarrow V_o \\downarrow\n\\]\n\nand\n\n\\[\nV_o \\downarrow \\Rightarrow I_{D2}\\downarrow.\n\\]\n\nBut \\(I_{D2}\\) is the current removing charge from node \\(X\\). So if \\(I_{D2}\\) decreases, node \\(X\\) tends to rise even more. Therefore the loop is regenerative, i.e. positive feedback.\n\nThe small-signal input resistance can become negative:\n\n\\[\ng_{m1}g_{m2} > G_Dg_{o2}\n\\]\n\nwhich is usually true if \\(M_2\\) is in saturation because \\(g_{o2}\\) is small.\n\nWith parasitic capacitances \\(C_X\\) and \\(C_o\\), the small-signal characteristic equation is approximately\n\n\\[\ns^2\n+\ns\\left(\\frac{g_{o2}}{C_X}+\\frac{G_D}{C_o}\\right)\n+\n\\frac{G_Dg_{o2}-g_{m1}g_{m2}}{C_XC_o}\n=0.\n\\]\n\nFor stability,\n\n\\[\n\\boxed{G_Dg_{o2} > g_{m1}g_{m2}}\n\\]\n\nmust hold. If not, the circuit is locally unstable and may latch or switch rather than operate as a linear amplifier.\n\nSo, algebraically, the circuit can behave like a current-to-voltage converter with\n\n\\[\nV_o \\sim V_{T2}+\\sqrt{I_{in}}\n\\]\n\nand small-signal transimpedance approximately \\(1/g_{m2}\\), but as drawn it uses positive feedback and is not generally a stable linear circuit unless additional damping or biasing is provided.",
        "format": "markdown",
        "sha256": "fd54b07989baf9cb674dd599695416f0a05f4d238bc8469bc6b0e4979f050eee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2’s gate is tied to Vout, recognizes the positive-feedback loop, and derives a negative input resistance with instability/latching as a consequence. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 16358,
        "total_tokens": 18415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15007,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 16358,
        "total_tokens": 18415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15007,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume a midband small-signal analysis, both MOSFETs in saturation, \\(r_o\\) and capacitances neglected, and \\(V_{DD}\\) and \\(V_b\\) are ac grounds. Let the input/source node of \\(M_1\\) be \\(v_i\\), node \\(X\\) be \\(v_x\\), and output be \\(v_o\\). A positive \\(i_{in}\\) is injected upward into the input node as drawn.\n\n### 1. Small-signal behavior of the two stages\n\n\\(M_1\\) is a common-gate device. Since its gate is ac-grounded,\n\n\\[\nv_{gs1}=-v_i\n\\]\n\nand the small-signal current change in \\(M_1\\) makes node \\(X\\) move as\n\n\\[\n\\frac{v_x}{R_{D1}}-g_{m1}v_i=0\n\\]\n\nso\n\n\\[\nv_x=g_{m1}R_{D1}v_i\n\\]\n\n\\(M_2\\) is a common-source stage, so its drain/output current is\n\n\\[\ng_{m2}v_x\n\\]\n\nAt the output node,\n\n\\[\n\\frac{v_o}{R_{D2}}+\\frac{v_o-v_i}{R_F}+g_{m2}v_x=0\n\\]\n\nSubstituting \\(v_x=g_{m1}R_{D1}v_i\\),\n\n\\[\n\\frac{v_o}{v_i}\n=\n\\frac{R_{D2}\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)}\n{R_{D2}+R_F}\n\\]\n\nWithout feedback loading, the open-loop voltage gain from the input node to the output is approximately\n\n\\[\nA_v \\approx -g_{m1}g_{m2}R_{D1}R_{D2}\n\\]\n\nso the two-transistor core is an inverting amplifier.\n\n---\n\n### 2. Input-node KCL\n\nAt the input node,\n\n\\[\ni_{in}=g_{m1}v_i+\\frac{v_i-v_o}{R_F}\n\\]\n\nSolving gives the input resistance\n\n\\[\nR_{in}\n=\n\\frac{v_i}{i_{in}}\n=\n\\frac{R_F+R_{D2}}\n{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n\\]\n\nDefine\n\n\\[\nA_0=g_{m1}g_{m2}R_{D1}R_{D2}\n\\]\n\nThen\n\n\\[\nR_{in}=\n\\frac{R_F+R_{D2}}\n{1+g_{m1}(R_F+R_{D2})+A_0}\n\\]\n\n---\n\n### 3. Transimpedance gain\n\nThe transimpedance is\n\n\\[\nZ_T=\\frac{v_o}{i_{in}}\n\\]\n\nUsing the previous results,\n\n\\[\n\\boxed{\nZ_T\n=\n\\frac{R_{D2}-A_0R_F}\n{1+g_{m1}(R_F+R_{D2})+A_0}\n}\n\\]\n\nwhere\n\n\\[\nA_0=g_{m1}g_{m2}R_{D1}R_{D2}\n\\]\n\nIf the loop gain is large, i.e.\n\n\\[\nA_0 \\gg 1+g_{m1}(R_F+R_{D2})\n\\]\n\nthen\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}\\approx -R_F\n}\n\\]\n\nThus the circuit behaves like an inverting transimpedance amplifier.\n\n---\n\n### 4. Feedback current\n\nWith the arrow \\(i_{RF}\\) defined from output to input,\n\n\\[\ni_{RF}=\\frac{v_o-v_i}{R_F}\n\\]\n\nUsing the solved expressions,\n\n\\[\n\\frac{i_{RF}}{i_{in}}\n=\n-\\frac{A_0+1}\n{1+g_{m1}(R_F+R_{D2})+A_0}\n\\]\n\nFor large loop gain,\n\n\\[\ni_{RF}\\approx -i_{in}\n\\]\n\nSo the actual feedback current flows opposite to the arrow shown: it flows from the input node toward the output node for positive \\(i_{in}\\).\n\n---\n\n### 5. Interpretation\n\n- \\(M_1\\) converts the input-node voltage to a voltage at node \\(X\\).\n- \\(M_2\\) provides an inverting voltage gain from \\(X\\) to \\(V_{out}\\).\n- \\(R_F\\) applies shunt negative feedback.\n- For large gain, the input node becomes a small-signal virtual ground.\n- The transimpedance is set mainly by \\(R_F\\):\n\n\\[\nV_{out}\\approx -I_{in}R_F\n\\]\n\nfor the sign convention shown.",
        "format": "markdown",
        "sha256": "c0089bfbfeead23ee67b7901dc6a9bbfeb72dea3477225c4beefbebd305b4e54"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input, forming a transimpedance amplifier with high-gain response near −RF.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 13493,
        "total_tokens": 15771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 13493,
        "total_tokens": 15771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume a midband small-signal analysis, with \\(V_{DD}\\) and \\(V_b\\) as ac grounds, both MOSFETs in saturation, and \\(r_o\\) neglected.\n\nLet the input/source node of \\(M_1\\) be \\(v_i\\), node \\(X\\) be \\(v_x\\), and output be \\(v_o\\). A positive \\(i_{in}\\) is taken as injected upward into the input node.\n\nThis is a **shunt-feedback transimpedance amplifier**:\n\n- \\(M_1\\) is a common-gate input device.\n- \\(M_2\\) is a common-source gain stage.\n- \\(R_F\\) feeds output voltage back as current to the input node.\n\nFor a positive input current, \\(v_i\\) rises, \\(v_x\\) rises, \\(M_2\\) pulls \\(v_o\\) down, and \\(R_F\\) draws current away from the input node: negative feedback.\n\n---\n\n### Small-signal equations\n\nAt node \\(X\\):\n\n\\[\n\\frac{v_x}{R_{D1}}-g_{m1}v_i=0\n\\]\n\nso\n\n\\[\nv_x=g_{m1}R_{D1}v_i\n\\]\n\nAt the output:\n\n\\[\n\\frac{v_o}{R_{D2}}+\\frac{v_o-v_i}{R_F}+g_{m2}v_x=0\n\\]\n\nAt the input node:\n\n\\[\ni_{in}=g_{m1}v_i+\\frac{v_i-v_o}{R_F}\n\\]\n\n---\n\n### Gain from input node to output\n\nUsing \\(v_x=g_{m1}R_{D1}v_i\\),\n\n\\[\n\\frac{v_o}{v_i}\n=\n\\frac{\\frac{1}{R_F}-g_{m1}g_{m2}R_{D1}}\n{\\frac{1}{R_{D2}}+\\frac{1}{R_F}}\n\\]\n\nIf \\(R_F\\gg R_{D2}\\), this becomes approximately\n\n\\[\n\\frac{v_o}{v_i}\\approx -g_{m1}g_{m2}R_{D1}R_{D2}\n\\]\n\nDefine the open-loop voltage gain magnitude as\n\n\\[\nA_0=g_{m1}g_{m2}R_{D1}R_{D2}\n\\]\n\nso approximately\n\n\\[\nv_o\\approx -A_0 v_i\n\\]\n\n---\n\n### Input resistance\n\nThe small-signal input resistance is\n\n\\[\nR_{in}=\\frac{v_i}{i_{in}}\n\\]\n\nSolving the above equations gives\n\n\\[\n\\boxed{\nR_{in}\n=\n\\frac{R_F+R_{D2}}\n{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\nIf \\(R_F\\gg R_{D2}\\),\n\n\\[\nR_{in}\\approx\n\\frac{R_F}{1+g_{m1}R_F+A_0}\n\\]\n\nor equivalently,\n\n\\[\nR_{in}\\approx\n\\left(\ng_{m1}+\\frac{1+A_0}{R_F}\n\\right)^{-1}\n\\]\n\nSo the feedback lowers the input resistance.\n\n---\n\n### Transimpedance gain\n\nThe main result is\n\n\\[\nZ_T=\\frac{v_o}{i_{in}}\n\\]\n\nUsing the small-signal solution,\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}\n=\n\\frac{\nR_{D2}\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)\n}\n{\n1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}\n}\n}\n\\]\n\nFor \\(R_F\\gg R_{D2}\\), this simplifies to\n\n\\[\n\\boxed{\nZ_T\n\\approx\n-\\frac{A_0R_F}{1+A_0+g_{m1}R_F}\n}\n\\]\n\nIf the loop gain is large, i.e.\n\n\\[\nA_0\\gg 1+g_{m1}R_F\n\\]\n\nthen\n\n\\[\n\\boxed{\nv_o\\approx -i_{in}R_F\n}\n\\]\n\nSo in the ideal high-gain limit, the circuit behaves like a transimpedance amplifier with gain \\(-R_F\\).\n\n---\n\n### Feedback current\n\nIf current through \\(R_F\\) is defined from input node to output node,\n\n\\[\ni_F=\\frac{v_i-v_o}{R_F}\n\\]\n\nthen\n\n\\[\n\\frac{i_F}{i_{in}}\n=\n\\frac{1+A_0}\n{1+g_{m1}(R_F+R_{D2})+A_0}\n\\]\n\nThus, for large loop gain, almost all of the input current flows through \\(R_F\\), giving\n\n\\[\ni_F\\approx i_{in}\n\\]\n\nand therefore\n\n\\[\nv_o\\approx -i_{in}R_F\n\\]\n\nThe arrow in the figure appears to define \\(i_{RF}\\) in the opposite direction, from output to input, so with the sign convention above:\n\n\\[\ni_{RF}=-i_F\n\\]\n\n---\n\n### Summary\n\nThe circuit is a resistive-feedback CMOS transimpedance amplifier. Its ideal behavior is\n\n\\[\n\\boxed{V_{out}\\approx -I_{in}R_F}\n\\]\n\nprovided the gain of the \\(M_1\\)-\\(M_2\\) amplifier is sufficiently large. The feedback also lowers the input impedance, helping hold the input node close to ac ground.",
        "format": "markdown",
        "sha256": "9f5b4176af4ec3ac95a434164044fd93b48ea8ccbc14537858675b1580aad637"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input node, forming a transimpedance amplifier. The stated high-gain limit and low input resistance are also consistent with the solution.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2278,
        "output_tokens": 16775,
        "total_tokens": 19053,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2278,
        "output_tokens": 16775,
        "total_tokens": 19053,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume a midband small-signal analysis, with \\(V_{DD}\\) and \\(V_b\\) as ac grounds, MOSFETs in saturation, and \\(r_o\\) and body effect neglected.\n\nLet\n\n- \\(v_s\\) = small-signal voltage at the input/source node of \\(M_1\\),\n- \\(v_x\\) = small-signal voltage at node \\(X\\),\n- \\(v_o = v_{out}\\),\n- \\(G_F=1/R_F\\), \\(G_{D2}=1/R_{D2}\\).\n\n### 1. Circuit function\n\n\\(M_1\\) is a common-gate input device, and \\(M_2\\) is a common-source gain stage. A positive small-signal input current raises \\(v_s\\), raises \\(v_x\\), and therefore drives \\(M_2\\) harder, pulling \\(v_o\\) downward. Through \\(R_F\\), this lower \\(v_o\\) pulls current out of the input node. Thus \\(R_F\\) provides negative shunt feedback.\n\nSo the circuit is a current-to-voltage converter, i.e. a transimpedance amplifier.\n\n---\n\n### 2. Small-signal equations\n\nFor \\(M_1\\),\n\n\\[\nv_x = g_{m1}R_{D1}v_s\n\\]\n\nAt the output node,\n\n\\[\n\\frac{v_o}{R_{D2}}+\\frac{v_o-v_s}{R_F}+g_{m2}v_x=0\n\\]\n\nAt the input node,\n\n\\[\ni_{in}=g_{m1}v_s+\\frac{v_s-v_o}{R_F}\n\\]\n\nUsing \\(v_x=g_{m1}R_{D1}v_s\\), define\n\n\\[\nK=g_{m1}g_{m2}R_{D1}\n\\]\n\nThen the exact small-signal transimpedance, under the assumptions above, is\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}\n=\n\\frac{G_F-K}\n{g_{m1}(G_{D2}+G_F)+G_F(G_{D2}+K)}\n}\n\\]\n\nwhere \\(G_F=1/R_F\\) and \\(G_{D2}=1/R_{D2}\\).\n\n---\n\n### 3. High-loop-gain approximation\n\nIf the loop gain is large, the input node becomes a virtual ac ground:\n\n\\[\nv_s \\approx 0\n\\]\n\nThen almost all of the input current flows through \\(R_F\\). With the arrow in the figure defining \\(i_{RF}\\) from output to input,\n\n\\[\ni_{RF}=\\frac{v_o-v_s}{R_F}\\approx \\frac{v_o}{R_F}\n\\]\n\nand KCL gives\n\n\\[\ni_{RF}\\approx -i_{in}\n\\]\n\nTherefore,\n\n\\[\n\\boxed{v_o \\approx -i_{in}R_F}\n\\]\n\nSo the closed-loop transimpedance is approximately\n\n\\[\n\\boxed{Z_T=\\frac{v_o}{i_{in}}\\approx -R_F}\n\\]\n\nA positive input current produces a negative output voltage swing.\n\n---\n\n### 4. Input resistance\n\nThe closed-loop input resistance is\n\n\\[\n\\boxed{\nR_{in}=\\frac{v_s}{i_{in}}\n=\n\\frac{G_{D2}+G_F}\n{g_{m1}(G_{D2}+G_F)+G_F(G_{D2}+K)}\n}\n\\]\n\nWith large loop gain,\n\n\\[\nR_{in} \\ll \\frac{1}{g_{m1}}\n\\]\n\nso the feedback makes the input node very low impedance.\n\n---\n\n### 5. Design condition\n\nIgnoring the loading of \\(R_F\\) at the output, the open-loop voltage gain from \\(v_s\\) to \\(v_o\\) is approximately\n\n\\[\nA_0 \\approx -g_{m1}R_{D1}g_{m2}R_{D2}\n\\]\n\nThe circuit behaves like an ideal transimpedance amplifier when\n\n\\[\n|A_0| \\gg 1+g_{m1}R_F\n\\]\n\nor, equivalently, the open-loop transresistance\n\n\\[\nR_{T0}\\approx g_{m2}R_{D1}R_{D2}\n\\]\n\nis much larger than \\(R_F\\). Then\n\n\\[\n\\boxed{v_{out}\\approx -I_{in}R_F}\n\\]\n\nwhich is the main result.",
        "format": "markdown",
        "sha256": "2010ee554f9cdb434a1764b3a2943447c28833d4fecc313ad91168d64461a79f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as a common-source stage driven by X, and RF as negative feedback from the output to the input node. The transimpedance and low-input-resistance conclusions are also correct.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2278,
        "output_tokens": 15464,
        "total_tokens": 17742,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2278,
        "output_tokens": 15464,
        "total_tokens": 17742,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let the lower unlabeled current sink be \\(I_0\\), and call the common lower node \\(V_X\\). Assume:\n\n- \\(M_1\\) is an NMOS with gate biased at \\(V_b\\).\n- \\(M_2\\) is a PMOS with source at \\(V_{DD}\\), gate at \\(V_{\\text{out}}\\), and drain at \\(V_X\\).\n- The output is unloaded.\n- Both MOSFETs operate in saturation unless stated otherwise.\n\n---\n\n## 1. DC large-signal operation\n\nAt node \\(V_{\\text{out}}\\), the gate of \\(M_2\\) draws no dc current, so the current source \\(I_1\\) must flow through \\(M_1\\):\n\n\\[\nI_{D1}=I_1\n\\]\n\nThus \\(M_1\\) fixes the input/source node voltage approximately as\n\n\\[\nV_X = V_b - V_{GS1}\n\\]\n\nFor long-channel saturation,\n\n\\[\nV_{GS1}=V_{TN}+\\sqrt{\\frac{2I_1}{\\beta_n}}\n\\]\n\nso\n\n\\[\n\\boxed{V_X \\approx V_b - V_{TN}-\\sqrt{\\frac{2I_1}{\\beta_n}}}\n\\]\n\nNow apply KCL at node \\(V_X\\). Currents entering \\(V_X\\) are \\(I_{\\text{in}}\\), \\(I_1\\) through \\(M_1\\), and the PMOS current \\(I_{D2}\\). The current leaving is \\(I_0\\):\n\n\\[\nI_0 = I_{\\text{in}} + I_1 + I_{D2}\n\\]\n\nTherefore\n\n\\[\n\\boxed{I_{D2}=I_0-I_1-I_{\\text{in}}}\n\\]\n\nFor \\(M_2\\) in saturation,\n\n\\[\nI_{D2}=\\frac{1}{2}\\beta_p\\left(V_{SG2}-|V_{TP}|\\right)^2\n\\]\n\nwith\n\n\\[\nV_{SG2}=V_{DD}-V_{\\text{out}}\n\\]\n\nso\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}-|V_{TP}|-\n\\sqrt{\\frac{2\\left(I_0-I_1-I_{\\text{in}}\\right)}{\\beta_p}}\n}\n\\]\n\nThus increasing \\(I_{\\text{in}}\\) reduces the current required from \\(M_2\\), so \\(V_{\\text{out}}\\) rises.\n\n---\n\n## 2. Small-signal behavior\n\nLet \\(v_x\\) be the small-signal voltage at node \\(V_X\\), and \\(v_o=v_{\\text{out}}\\). Assuming ideal bias current sources and ignoring body effect, the small-signal gain from \\(v_x\\) to \\(v_o\\) is approximately\n\n\\[\n\\frac{v_o}{v_x}=1+g_{m1}r_{o1}\n\\]\n\nThe PMOS converts the output voltage back into a current at node \\(V_X\\). The small-signal input current is\n\n\\[\ni_{\\text{in}} \\approx g_{m2}v_o + g_{o2}v_x\n\\]\n\nCombining,\n\n\\[\ni_{\\text{in}}\n=\n\\left[g_{m2}\\left(1+g_{m1}r_{o1}\\right)+g_{o2}\\right]v_x\n\\]\n\nTherefore the input resistance is\n\n\\[\n\\boxed{\nR_{\\text{in}}\n=\n\\frac{v_x}{i_{\\text{in}}}\n=\n\\frac{1}{\ng_{m2}\\left(1+g_{m1}r_{o1}\\right)+g_{o2}\n}\n}\n\\]\n\nIf \\(g_{m1}r_{o1}\\gg 1\\) and \\(g_{o2}\\ll g_{m2}g_{m1}r_{o1}\\),\n\n\\[\n\\boxed{\nR_{\\text{in}}\\approx \\frac{1}{g_{m1}g_{m2}r_{o1}}\n}\n\\]\n\nSo this circuit presents a very low input resistance.\n\nThe current-to-voltage gain is\n\n\\[\n\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n=\n\\frac{1+g_{m1}r_{o1}}\n{g_{m2}\\left(1+g_{m1}r_{o1}\\right)+g_{o2}}\n\\]\n\nand for large loop gain,\n\n\\[\n\\boxed{\n\\frac{v_{\\text{out}}}{i_{\\text{in}}}\\approx \\frac{1}{g_{m2}}\n}\n\\]\n\n---\n\n## 3. Interpretation\n\nThis is a current-to-voltage converter with local negative feedback.\n\n- \\(M_1\\) senses changes at the input node \\(V_X\\).\n- The drain voltage of \\(M_1\\), \\(V_{\\text{out}}\\), changes strongly because \\(M_1\\) has high gain.\n- \\(M_2\\) feeds back current into \\(V_X\\), forcing \\(V_X\\) to remain nearly constant.\n- As a result, the input node has very low impedance.\n- The output voltage changes approximately by\n\n\\[\n\\Delta V_{\\text{out}} \\approx \\frac{\\Delta I_{\\text{in}}}{g_{m2}}\n\\]\n\nfor small-signal variations.\n\nThe valid input-current range is limited by the requirement\n\n\\[\nI_0-I_1-I_{\\text{in}}>0\n\\]\n\nand by the saturation conditions of \\(M_1\\) and \\(M_2\\).",
        "format": "markdown",
        "sha256": "7e99a0e36084e670d0ce3a78bbf315b4add3e00909e61ad5540e84a58acbc236"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS M1 and PMOS feedback device M2, describes feedback from Vout to the input node, and derives the low input resistance and transimpedance approximately 1/gm2. This meets the golden solution's full-credit rule.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 15707,
        "total_tokens": 17874,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 15707,
        "total_tokens": 17874,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let the lower unlabelled current sink be \\(I_0\\), and call the lower junction \\(V_x\\). Assume:\n\n- \\(M_1\\) is an NMOS with gate biased by \\(V_b\\).\n- \\(M_2\\) is a PMOS with source at \\(V_{DD}\\), gate at \\(V_{out}\\), and drain at \\(V_x\\).\n- Both MOSFETs operate in saturation.\n- Current sources are ideal unless otherwise stated.\n\n## 1. DC operation\n\nAt the output node, the current source \\(I_1\\) feeds the drain of \\(M_1\\). Since the gate of \\(M_2\\) draws no DC current,\n\n\\[\nI_{D1}=I_1\n\\]\n\nThus \\(M_1\\) fixes the input-node voltage approximately as\n\n\\[\nV_x = V_b - V_{GS1}(I_1)\n\\]\n\nFor a square-law NMOS, ignoring channel-length modulation,\n\n\\[\nI_1=\\frac{1}{2}k_n\\left(V_b-V_x-V_{Tn}\\right)^2\n\\]\n\nso\n\n\\[\nV_x = V_b - V_{Tn}-\\sqrt{\\frac{2I_1}{k_n}}\n\\]\n\nAt node \\(V_x\\), KCL gives\n\n\\[\nI_0 = I_{in}+I_{D1}+I_{D2}\n\\]\n\nSince \\(I_{D1}=I_1\\),\n\n\\[\nI_{D2}=I_0-I_1-I_{in}\n\\]\n\nSo the PMOS current is controlled by the input current. For \\(M_2\\),\n\n\\[\nI_{D2}=\\frac{1}{2}k_p\\left(V_{DD}-V_{out}-|V_{Tp}|\\right)^2\n\\]\n\ntherefore\n\n\\[\nV_{out}=V_{DD}-|V_{Tp}|-\\sqrt{\\frac{2\\left(I_0-I_1-I_{in}\\right)}{k_p}}\n\\]\n\nThus an increase in \\(I_{in}\\) decreases the required current through \\(M_2\\), so \\(V_{out}\\) rises.\n\nThe circuit requires\n\n\\[\nI_0>I_1+I_{in}\n\\]\n\nso that \\(M_2\\) remains on.\n\n---\n\n## 2. Small-signal behavior\n\nLet \\(g_{m1}, r_{o1}\\) be the small-signal parameters of \\(M_1\\), and \\(g_{m2}, r_{o2}\\) those of \\(M_2\\). Define\n\n\\[\ng_{o1}=\\frac{1}{r_{o1}}, \\qquad g_{o2}=\\frac{1}{r_{o2}}\n\\]\n\nFor ideal current sources, the small-signal gain from \\(V_x\\) to \\(V_{out}\\) is\n\n\\[\n\\frac{v_{out}}{v_x}=1+g_{m1}r_{o1}\n\\]\n\nThe input current is absorbed mainly by the small-signal current change of \\(M_2\\):\n\n\\[\ni_{in}=g_{m2}v_{out}+g_{o2}v_x\n\\]\n\nTherefore,\n\n\\[\nR_{in}=\\frac{v_x}{i_{in}}\n      =\n      \\frac{1}{g_{o2}+g_{m2}\\left(1+g_{m1}r_{o1}\\right)}\n\\]\n\nIf \\(g_{m1}r_{o1}\\gg 1\\),\n\n\\[\nR_{in}\\approx \\frac{1}{g_{m1}g_{m2}r_{o1}}\n\\]\n\nSo the input node is a low-impedance node.\n\nThe transimpedance gain is\n\n\\[\n\\frac{v_{out}}{i_{in}}\n=\n\\frac{1+g_{m1}r_{o1}}\n     {g_{o2}+g_{m2}\\left(1+g_{m1}r_{o1}\\right)}\n\\]\n\nFor large loop gain,\n\n\\[\n\\boxed{\\frac{v_{out}}{i_{in}}\\approx \\frac{1}{g_{m2}}}\n\\]\n\nSo the circuit acts approximately as a current-to-voltage converter with transresistance \\(1/g_{m2}\\).\n\n---\n\n### Summary\n\n- \\(I_1\\) fixes the current through \\(M_1\\).\n- \\(V_x\\) is held nearly constant by feedback.\n- \\(I_{in}\\) modulates the current required from \\(M_2\\).\n- \\(V_{out}\\) adjusts to set that PMOS current.\n- Small-signal transimpedance:\n\n\\[\n\\boxed{v_{out}\\approx \\frac{i_{in}}{g_{m2}}}\n\\]\n\n- Input resistance is very low:\n\n\\[\n\\boxed{R_{in}\\approx \\frac{1}{g_{m1}g_{m2}r_{o1}}}\n\\]",
        "format": "markdown",
        "sha256": "9768a9021f27f2303a467a071b5c207ac811ab7460efa3eef5c1a3b783db1bd4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device and PMOS feedback device, describes their feedback action, and derives the very low input resistance and transimpedance of approximately 1/gm2. The main conclusions match the golden solution.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 12983,
        "total_tokens": 15150,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 12983,
        "total_tokens": 15150,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let the lower node be \\(V_x\\), and call the downward bias current source at that node \\(I_B\\). Assume \\(M_1\\) is NMOS, \\(M_2\\) is PMOS, both in saturation, and the current sources are ideal.\n\n## 1. DC operating point\n\nAt the output node, the gate of \\(M_2\\) draws no dc current, so the current source \\(I_1\\) must flow through \\(M_1\\):\n\n\\[\nI_{D1}=I_1\n\\]\n\nThus \\(M_1\\) fixes the lower node voltage approximately by\n\n\\[\nV_x \\approx V_b - V_{Tn}-V_{OV1}\n\\]\n\nwhere\n\n\\[\nV_{OV1}=\\sqrt{\\frac{2I_1}{\\beta_n}}\n\\]\n\nignoring channel-length modulation.\n\nAt node \\(V_x\\), KCL gives\n\n\\[\nI_B = I_{in}+I_{D1}+I_{D2}\n\\]\n\nso\n\n\\[\nI_{D2}=I_B-I_1-I_{in}\n\\]\n\nwhere \\(I_{D2}\\) is the PMOS current flowing from \\(V_{DD}\\) into node \\(V_x\\).\n\nFor \\(M_2\\),\n\n\\[\nI_{D2}\\approx \\frac{1}{2}\\beta_p\\left(V_{DD}-V_{out}-|V_{Tp}|\\right)^2\n\\]\n\nso\n\n\\[\nV_{out}\\approx V_{DD}-|V_{Tp}|-\\sqrt{\\frac{2\\left(I_B-I_1-I_{in}\\right)}{\\beta_p}}\n\\]\n\nTherefore, increasing \\(I_{in}\\) reduces the current required from \\(M_2\\), so \\(V_{out}\\) rises.\n\n---\n\n## 2. Small-signal behavior\n\nLet \\(i_{in}\\) be a small-signal input current injected into node \\(V_x\\). Let\n\n\\[\ng_{m1}^\\ast = g_{m1}+g_{mb1}\n\\]\n\nto include body effect of \\(M_1\\). With ideal current sources and no output load, the small-signal equations are\n\n\\[\ng_{o1}v_{out}-(g_{m1}^\\ast+g_{o1})v_x=0\n\\]\n\nand\n\n\\[\ni_{in}=(g_{m1}^\\ast+g_{o1}+g_{o2})v_x+(g_{m2}-g_{o1})v_{out}\n\\]\n\nFrom the first equation,\n\n\\[\n\\frac{v_{out}}{v_x}=1+g_{m1}^\\ast r_{o1}\n\\]\n\nDefine\n\n\\[\nA=1+g_{m1}^\\ast r_{o1}\n\\]\n\nThen the input resistance is\n\n\\[\nR_{in}=\\frac{v_x}{i_{in}}\n      =\\frac{1}{g_{o2}+g_{m2}A}\n\\]\n\nand the transimpedance gain is\n\n\\[\n\\frac{v_{out}}{i_{in}}\n=\n\\frac{A}{g_{o2}+g_{m2}A}\n\\]\n\nIf \\(g_{m1}r_{o1}\\gg 1\\) and \\(g_{m2}A\\gg g_{o2}\\), then\n\n\\[\n\\boxed{\\frac{v_{out}}{i_{in}}\\approx \\frac{1}{g_{m2}}}\n\\]\n\nand\n\n\\[\n\\boxed{R_{in}\\approx \\frac{1}{g_{m2}\\left(1+g_{m1}r_{o1}\\right)}}\n\\]\n\nSo the circuit behaves like a low-input-resistance current-to-voltage converter whose transimpedance is approximately \\(1/g_{m2}\\).\n\n---\n\n## 3. Bias/headroom conditions\n\nFor proper operation:\n\n\\[\nI_B>I_1+I_{in}\n\\]\n\nso that \\(M_2\\) carries positive current.\n\nFor \\(M_1\\) saturation:\n\n\\[\nV_{out}-V_x \\ge V_{OV1}\n\\]\n\nFor \\(M_2\\) to remain on:\n\n\\[\nV_{DD}-V_{out} \\ge |V_{Tp}|\n\\]\n\nThus the useful output swing is roughly bounded by\n\n\\[\nV_x+V_{OV1} \\lesssim V_{out} \\lesssim V_{DD}-|V_{Tp}|\n\\]\n\nneglecting current-source compliance limits.\n\nIn words: \\(M_1\\) sets the lower node voltage using \\(I_1\\), while \\(M_2\\) provides feedback. A positive input current forces \\(V_{out}\\) upward, reducing the PMOS current so that KCL at the input node is maintained.",
        "format": "markdown",
        "sha256": "894101b95e0b61db27f33d42de0a3d6256cf7765c94823d7ee35b45c9343c135"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS and PMOS feedback path from Vout to the input node, and derives the low input resistance and transimpedance approaching 1/gm2. The small-signal equations are consistent with the stated assumptions.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 15015,
        "total_tokens": 17182,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 15015,
        "total_tokens": 17182,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No — not for any **finite** capacitance, assuming ideal/normal inverters with enough gain and finite drive current.\n\nMaking the three load capacitors larger mainly increases the propagation delay of each inverter stage, so the ring oscillation gets slower:\n\n\\[\nT \\approx 2N t_p,\\qquad N=3\n\\]\n\nand roughly\n\n\\[\nt_p \\propto R_{\\text{out}}C_L\n\\]\n\nso\n\n\\[\nf_{\\text{osc}} \\propto \\frac{1}{C_L}\n\\]\n\nThus as \\(C_L\\) becomes very large, the oscillation frequency approaches zero.\n\nHowever:\n\n- For any finite \\(C_L\\), the circuit can still oscillate, just very slowly.\n- If \\(C_L\\to\\infty\\) literally, the node voltages cannot change, so oscillation stops in that limiting sense.\n- In a real circuit, leakage, finite simulation time, exact symmetric initial conditions, or insufficient inverter gain could make it appear not to start.\n\nSo the practical answer is: **large capacitors do not create a finite cutoff where oscillation must stop; they only make the oscillator slower.**",
        "format": "markdown",
        "sha256": "6ea05afa23ecaaab45b0b668cf3b2aa0469846b61c32814835a8c8c87f616175"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating for finite capacitance at a lower frequency, supported by the increasing RC delay. The infinite-capacitance limit is appropriately distinguished from any finite-capacitance cutoff.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 4390,
        "total_tokens": 6587,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 4390,
        "total_tokens": 6587,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—**not for any finite value of the three capacitors**, assuming ideal capacitors and inverters with enough DC gain/drive.\n\nA 3-inverter ring oscillator oscillates because the loop has an odd inversion and delay. Increasing each \\(C_L\\) mainly increases the delay of each inverter stage:\n\n\\[\nt_p \\sim R_{\\text{out}} C_L\n\\]\n\nso the oscillation period increases roughly as\n\n\\[\nT \\approx 2N t_p = 6t_p\n\\]\n\nfor \\(N=3\\). Thus\n\n\\[\nf \\propto \\frac{1}{C_L}\n\\]\n\nAs \\(C_L\\) becomes very large, the oscillator becomes very slow. In the limit\n\n\\[\nC_L \\to \\infty\n\\]\n\nthe frequency tends to zero and the startup time tends to infinity, so an exactly infinite capacitance would mean no observable oscillation.\n\nIn a real circuit, very large capacitors may also make it appear not to oscillate because of leakage, finite observation time, weak drive, simulator initial conditions, etc. But ideally, for any finite \\(C_L\\), it should still oscillate; it just oscillates more slowly.",
        "format": "markdown",
        "sha256": "d26692be7f3f89a6cb7ad7f9e079c42e7488fe386ae74aa6c53edc94ce87ebc4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating for arbitrarily large finite capacitances and supports this with the accepted delay argument: larger capacitance lowers the frequency roughly as 1/CL. The infinite-capacitance limit is a reasonable caveat and does not undermine the answer.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 4397,
        "total_tokens": 6594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 4397,
        "total_tokens": 6594,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No — not in the ideal sense for any **finite** capacitor value.\n\nA 3-inverter ring oscillator oscillates because the loop has an odd inversion and finite delay. Increasing the three load capacitors mainly increases that delay, so the oscillation frequency falls.\n\nFor each output node, roughly:\n\n\\[\nC_L \\frac{dv}{dt}=I_{\\text{drive}}\n\\]\n\nso if \\(C_L\\) is made \\(k\\) times larger, the voltage waveforms are stretched in time by about \\(k\\). Thus:\n\n\\[\nT \\propto C_L,\\qquad f \\propto \\frac{1}{C_L}\n\\]\n\nSo the oscillator becomes arbitrarily slow as \\(C_L\\) becomes arbitrarily large.\n\nHowever:\n\n- For any finite \\(C_L\\), an ideal circuit with sufficient inverter gain will still oscillate.\n- In the limit \\(C_L \\to \\infty\\), the node voltages cannot change with finite drive current, so the oscillation frequency tends to zero.\n- In a real circuit, leakage, finite output current, startup time, and simulation time limits may make it appear to “fail” for very large capacitors.\n\nSo the concise answer is: **it does not have a finite capacitance threshold where it suddenly stops; it just slows down, with \\(f \\to 0\\) as \\(C_L \\to \\infty\\).**",
        "format": "markdown",
        "sha256": "ec66a8cd599806e3a8612ded5da2671c57bd5355f0b8ab766e01ac9b908b9b91"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency for finite capacitance, with delay scaling roughly with capacitance and frequency tending to zero as capacitance grows. This satisfies the golden solution’s full-credit delay-argument rule.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 5993,
        "total_tokens": 8190,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 5993,
        "total_tokens": 8190,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If all three load capacitors \\(C_L\\) are doubled, and everything else is left unchanged:\n\n- Each inverter delay roughly doubles.\n- The ring oscillator frequency roughly halves:\n\n\\[\nf_0 \\rightarrow \\frac{f_0}{2}\n\\]\n\nFor the usual white-noise-dominated ring-oscillator phase-noise estimate,\n\n\\[\n\\mathcal{L}(\\Delta f) \\propto \\left(\\frac{f_0}{\\Delta f}\\right)^2\n\\]\n\nso at the same absolute offset frequency \\(\\Delta f\\), the phase noise improves by a factor of 4:\n\n\\[\n\\mathcal{L}_{new} \\approx \\frac{1}{4}\\mathcal{L}_{old}\n\\]\n\nThat is about a **6 dB reduction in phase noise**.\n\nSo, for example, \\(-100\\ \\text{dBc/Hz}\\) would become roughly \\(-106\\ \\text{dBc/Hz}\\), assuming the capacitors dominate the delay and the bias/noise sources are otherwise unchanged.\n\nCaveat: if you compare phase noise at the same normalized offset, e.g. \\(\\Delta f/f_0\\), it is approximately unchanged because both \\(f_0\\) and the offset scale down together.",
        "format": "markdown",
        "sha256": "e721df5f158fed92c637ac5310213dd3632aa4a7431fa8fb7a865a1bff44ff0c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling the capacitors roughly halves the oscillation frequency and lowers phase noise by a factor of four (about 6 dB) at a fixed absolute offset, while noting it is unchanged at a fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 5970,
        "total_tokens": 8164,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 5970,
        "total_tokens": 8164,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If all three load capacitors \\(C_L\\) are doubled, and the inverters/bias are otherwise unchanged:\n\n- Each stage delay roughly doubles.\n- The oscillation frequency roughly halves:  \n  \\[\n  f_0 \\rightarrow \\frac{f_0}{2}\n  \\]\n- For a ring oscillator, phase noise at a fixed absolute offset \\(\\Delta f\\) approximately scales as  \n  \\[\n  \\mathcal L(\\Delta f)\\propto \\left(\\frac{f_0}{\\Delta f}\\right)^2\n  \\]\n  so halving \\(f_0\\) reduces the phase noise by a factor of 4.\n\nTherefore:\n\n\\[\n\\boxed{\\text{Phase noise improves by about }6\\text{ dB at the same offset frequency.}}\n\\]\n\nHowever, this is mostly because the oscillator is now running at half the frequency. If you compare at the same normalized offset \\(\\Delta f/f_0\\), or use a phase-noise FOM, there is essentially no fundamental improvement.",
        "format": "markdown",
        "sha256": "a50279cc900b3cd941d2de96c1d53de45653c349238dc52c4893c1e71239c305"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling the capacitors roughly halves the oscillation frequency, yielding about a fourfold (6 dB) phase-noise reduction at a fixed offset; it also correctly notes the unchanged result at a fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 6352,
        "total_tokens": 8546,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 6352,
        "total_tokens": 8546,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If all three load capacitors \\(C_L\\) are doubled, and the inverter sizes/bias/supply stay the same:\n\n- Each stage delay roughly doubles.\n- The oscillation frequency roughly halves.\n- The phase noise at a fixed offset frequency improves by about **6 dB**.\n\nUsing the usual ring-oscillator scaling,\n\n\\[\n\\mathcal L(\\Delta f) \\propto \\frac{1}{C_L^2}\n\\]\n\nso\n\n\\[\nC_L \\rightarrow 2C_L\n\\quad \\Rightarrow \\quad\n\\mathcal L \\rightarrow \\frac{1}{4}\\mathcal L\n\\]\n\nwhich is a **6 dB reduction** in phase noise.\n\nHowever, this is not a free improvement: the oscillator is now running at half the frequency. If you compare phase noise at the same normalized offset, e.g. same \\(\\Delta f/f_0\\), the improvement essentially disappears.",
        "format": "markdown",
        "sha256": "94dc82ff68c9e77980bdc7c53ba0fdaaf46a14bb5a056763243afa5c0a62a99f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors roughly halves the oscillation frequency and reduces phase noise by about 6 dB at a fixed offset; it also correctly notes no change at the same relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 8486,
        "total_tokens": 10680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 8486,
        "total_tokens": 10680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the **ideal digital-gate picture**, a finite but very large \\(C_L\\) does not create a hard “no oscillation” limit: the first inverter can still charge and discharge the capacitor, so the oscillation just becomes very slow or the loaded node may swing only slightly around the next inverter’s switching threshold.\n\nBut in a **real CMOS circuit**, yes, an arbitrarily large \\(C_L\\) will eventually prevent reliable oscillation.\n\nWhy:\n\n- The loaded node slew rate is limited:  \n  \\[\n  \\frac{dV}{dt} \\approx \\frac{I_{\\text{drive}}}{C_L}\n  \\]\n  so as \\(C_L \\to \\infty\\), the node voltage changes vanishingly slowly.\n- The ring relies on finite gain and finite delay to satisfy the oscillation condition. With a huge \\(C_L\\), the extra pole/attenuation at that node reduces loop gain and phase margin.\n- The loaded node may no longer move far enough or fast enough to switch the following inverter cleanly.\n- Leakage, noise, finite inverter gain, and short-circuit current around the switching point become important.\n- For \\(C_L = \\infty\\), the node is effectively fixed, so oscillation is impossible.\n\nSo the practical answer is:\n\n**A very large but finite \\(C_L\\) may still oscillate, at lower frequency and possibly with poor waveform quality; but a real circuit has a maximum usable \\(C_L\\). In the limit \\(C_L \\rightarrow \\infty\\), it will not oscillate.**",
        "format": "markdown",
        "sha256": "d4ead5345189a4317f30f26f59f5457093ed1d8227f927d278cdd647b1873bc6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large loading can prevent oscillation and identifies the dominant pole, loop-gain attenuation, and failure to switch as the mechanisms. The caveat that some large finite loads may still oscillate does not contradict the stated eventual failure.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 6547,
        "total_tokens": 8599,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 6547,
        "total_tokens": 8599,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends on the model, but for a **real CMOS circuit** the answer is **yes: a sufficiently large \\(C_L\\) can make it fail to oscillate**.\n\nLet \\(x\\) be the loaded node. If \\(C_L\\) is very large, \\(x\\) moves very slowly. The other two inverters then effectively follow \\(x\\) almost instantaneously. Around the inverter switching point:\n\n- if \\(x\\) rises slightly, the feedback through the next two inverters makes the first inverter pull \\(x\\) back down;\n- if \\(x\\) falls slightly, the first inverter pulls it back up.\n\nSo with a very large \\(C_L\\), the loop behaves like negative feedback that biases the node near the switching threshold, rather than producing sustained oscillation.\n\nA small-signal model makes this clear. Model each inverter as\n\n\\[\nH_i(s)=\\frac{-A_i}{1+s\\tau_i}\n\\]\n\nwith \\(\\tau_1 \\propto C_L\\). The loop characteristic is\n\n\\[\n(1+s\\tau_1)(1+s\\tau_2)(1+s\\tau_3)+A_1A_2A_3=0.\n\\]\n\nOscillation/startup requires the mid-level operating point to be unstable. As \\(C_L\\to\\infty\\), \\(\\tau_1\\to\\infty\\), and the roots move into the stable left-half plane for any finite inverter gain. Thus the circuit can settle near the metastable analog point instead of oscillating.\n\nHowever, in an **ideal Boolean/infinite-gain gate model**, any finite \\(C_L\\) would eventually be charged or discharged enough to trip the next inverter, so one might say it “still oscillates,” with degraded/degenerate waveforms. That ideal result is not physically reliable for arbitrarily large \\(C_L\\).\n\nSo the practical answer is: **yes, with real finite-gain, finite-bandwidth inverters, making \\(C_L\\) arbitrarily large will eventually stop oscillation.**",
        "format": "markdown",
        "sha256": "1b08c277f8ebcd03402ba9323c5b8c6e814826ecf472dc26effcdec1856a0a98"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large loading can stop oscillation and explains the dominant-pole effect through a slow loaded node and settling near a stable operating point. The finite-gain model supports this result; the ideal-gate caveat is qualified and does not undermine the main answer.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 13901,
        "total_tokens": 15953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 13901,
        "total_tokens": 15953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — **for real inverters with finite gain**, a sufficiently large \\(C_L\\) can make the ring fail to start or sustain oscillation.\n\nAn odd number of inverters guarantees that there is no stable **logic-level** state, but it does **not** guarantee oscillation in the analog sense. The circuit can settle with all nodes near the inverter switching point.\n\nIf each inverter is modeled near its switching point as a finite-gain one-pole amplifier, with\n\n\\[\n\\tau_1 \\approx R_{out,1}(C_L+C_p)\n\\]\n\nfor the loaded node and \\(\\tau_2,\\tau_3\\) for the other two nodes, the loop is roughly\n\n\\[\nL(s)= -\\frac{G}{(1+s\\tau_1)(1+s\\tau_2)(1+s\\tau_3)}\n\\]\n\nwhere \\(G\\) is the product of the three inverter gains. The mid-point operating condition is unstable, allowing oscillation, only if approximately\n\n\\[\nG >\n(\\tau_1+\\tau_2+\\tau_3)\n\\left(\n\\frac{1}{\\tau_1}+\\frac{1}{\\tau_2}+\\frac{1}{\\tau_3}\n\\right)-1\n\\]\n\nAs \\(C_L\\) becomes very large, \\(\\tau_1\\) becomes very large, and the required loop gain grows without bound:\n\n\\[\nG_{\\text{required}} \\sim \\tau_1\\left(\\frac{1}{\\tau_2}+\\frac{1}{\\tau_3}\\right)\n\\]\n\nSince real inverters have finite gain, there will be some large enough \\(C_L\\) for which the condition is not met. Then the circuit can settle near the analog metastable point instead of oscillating.\n\nHowever, in an idealized digital model with infinite gain and ideal switching, one might say that any finite \\(C_L\\) merely makes the transition very slow or produces a very small swing around the threshold. But for a physical circuit, \\(C_L\\) cannot be made arbitrarily large and still guarantee oscillation.",
        "format": "markdown",
        "sha256": "f6142d69743a8b914d983b28fd9c5c9271eefd7e0549715d5eb462c4ede9b089"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large loading on one node can stop oscillation, and explains the dominant-pole/finite-loop-gain mechanism. The one-pole model and instability threshold support the conclusion; the secondary idealized-model caveat does not contradict it.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 11845,
        "total_tokens": 13897,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 11845,
        "total_tokens": 13897,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Ideally, **doubling both NMOS and PMOS widths reduces the phase-noise power by about a factor of 2**, i.e. **improves phase noise by ~3 dB**.\n\nReason:\n\n- Device current/drive strength roughly doubles.\n- Node capacitances also roughly double.\n- Therefore the ring-oscillator delay and frequency stay approximately the same.\n- But the stored/switching energy per transition doubles, so the same thermal noise causes less timing uncertainty.\n- Power consumption roughly doubles, and phase noise is approximately inversely proportional to power:\n\n\\[\n\\mathcal{L} \\propto \\frac{1}{P}\n\\]\n\nSo with \\(W_n\\) and \\(W_p\\) doubled:\n\n\\[\nP \\rightarrow 2P \\quad \\Rightarrow \\quad \\mathcal{L} \\rightarrow \\frac{1}{2}\\mathcal{L}\n\\]\n\nor about **3 dB lower phase noise**.\n\nIn practice, the improvement may be less than 3 dB if fixed parasitic capacitances, supply noise, flicker-noise upconversion, or layout effects dominate.",
        "format": "markdown",
        "sha256": "421df8cf7882d142df403b354ce85804f9358435601128c6744462961c695a10"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the required factor-of-two (~3 dB) phase-noise reduction and the expected first-order current, capacitance, and power scaling. The thermal-noise explanation is simplified, but the conclusion is correct.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3327,
        "output_tokens": 2828,
        "total_tokens": 6155,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3327,
        "output_tokens": 2828,
        "total_tokens": 6155,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(V_{DD}\\) is unchanged and the oscillator capacitance is dominated by the MOS devices:\n\n- Doubling NMOS/PMOS widths doubles the drive current.\n- It also roughly doubles the node capacitances.\n- Therefore the delay and oscillation frequency stay approximately the same.\n- The available signal charge \\(Q = CV_{DD}\\) doubles, while device noise power only doubles, so phase-noise power drops by about a factor of 2.\n\nSo the phase noise improves by approximately **3 dB**.\n\nEquivalently, if it was \\(-100\\ \\text{dBc/Hz}\\) at some offset, it becomes about \\(-103\\ \\text{dBc/Hz}\\).\n\nThis improvement costs about **2× more power**, so the phase-noise/power tradeoff or FOM is roughly unchanged.",
        "format": "markdown",
        "sha256": "707850c326d773d503152dff313ba996df78263e76a630742284f5911593fbaa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes about a 3 dB phase-noise reduction and gives the valid width-scaling explanation: current, node capacitance, signal charge, and device noise power scale as described. The added power cost is also correct.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3327,
        "output_tokens": 2768,
        "total_tokens": 6095,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3327,
        "output_tokens": 2768,
        "total_tokens": 6095,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(V_{DD}\\), channel lengths, and topology stay the same, and the oscillator is dominated by its own device capacitances:\n\n- Doubling NMOS/PMOS widths roughly doubles the drive current.\n- It also roughly doubles the node capacitances.\n- Therefore the delay and oscillation frequency stay approximately the same.\n- The noise voltage/jitter per transition decreases because the switching capacitance/energy is larger.\n- Thermal phase noise improves by about a factor of 2 in power spectral density, i.e. about **3 dB lower phase noise** at a given offset.\n\nSo, ideally:\n\n\\[\nW \\rightarrow 2W \\quad \\Rightarrow \\quad \\mathcal{L}(\\Delta f) \\rightarrow \\mathcal{L}(\\Delta f)-3\\text{ dB}\n\\]\n\nBut the power consumption also roughly doubles, so the phase-noise improvement is not “free”; the phase-noise figure of merit is approximately unchanged. If an external fixed load dominates or bias/power is held constant, the result can differ.",
        "format": "markdown",
        "sha256": "e7e6fa6938a8e964e6cff854de992f313d6a129657866b6b75b2b83ac309e2a3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts about a 3 dB phase-noise reduction and gives the right width-scaling explanation: drive current and intrinsic node capacitance both roughly double, leaving frequency about unchanged. The power/FoM caveat is also consistent.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3327,
        "output_tokens": 2295,
        "total_tokens": 5622,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3327,
        "output_tokens": 2295,
        "total_tokens": 5622,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "With the usual small-signal model for identical CMOS inverters biased at the switching point, the resistance is found by applying a test voltage \\(v_x\\) at the supply node.\n\nLet each inverter have NMOS and PMOS transconductances \\(g_{mn}\\) and \\(g_{mp}\\). A supply perturbation is common to all three inverters, so by symmetry all three internal nodes move by the same small-signal voltage \\(v\\).\n\nFor one inverter:\n\n\\[\ni_p=g_{mp}(v_x-v)\n\\]\n\nis the incremental current drawn from the supply through the PMOS, and\n\n\\[\ni_n=g_{mn}v\n\\]\n\nflows through the NMOS. KCL gives\n\n\\[\ng_{mp}(v_x-v)=g_{mn}v\n\\]\n\nso\n\n\\[\nv=\\frac{g_{mp}}{g_{mn}+g_{mp}}v_x\n\\]\n\nThus the incremental supply current of one inverter is\n\n\\[\ni_p=\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}v_x\n\\]\n\nFor three identical inverters,\n\n\\[\ni_x=3i_p\n\\]\n\nso the small-signal resistance looking into the supply node is\n\n\\[\n\\boxed{\nR_X=\\frac{v_x}{i_x}\n=\\frac{g_{mn}+g_{mp}}{3g_{mn}g_{mp}}\n}\n\\]\n\nor equivalently,\n\n\\[\n\\boxed{\nR_X=\\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n}\n\\]\n\nFor a symmetric inverter with\n\n\\[\ng_{mn}=g_{mp}=g_m\n\\]\n\nthis reduces to\n\n\\[\n\\boxed{\nR_X=\\frac{2}{3g_m}\n}\n\\]\n\nThis assumes a low-frequency small-signal analysis around the balanced/metastable operating point and neglects \\(r_o\\), capacitances, and body effect. During actual oscillation, the supply-node impedance is time-varying and frequency-dependent, so a single constant \\(R_X\\) is only an approximation.",
        "format": "markdown",
        "sha256": "ad17dac4a3ebb15b7402eeb09a63b54e9e8fb34847d3ada9379e3d0c9c89ffe8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The derivation is internally consistent for a static, balanced operating point, but it misses the dominant oscillation-driven charging and discharging of the load capacitances. The golden solution explicitly assigns this static gm-based result a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3147,
        "output_tokens": 10297,
        "total_tokens": 13444,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3147,
        "output_tokens": 10297,
        "total_tokens": 13444,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Strictly, the value cannot be determined from the block diagram alone; it depends on the inverter device model and on what operating point/frequency you mean.  \n\nIf the usual assumption is made — three identical CMOS inverters linearized about the symmetric switching point — then a common small-signal supply perturbation makes all three internal nodes move together by symmetry. Thus, for each inverter, the input and output are at the same small-signal voltage, so the pMOS and nMOS look like two diode-connected devices in series.\n\nLet\n\n\\[\nG_p=g_{mp}+g_{dsp}, \\qquad G_n=g_{mn}+g_{dsn}\n\\]\n\nwhere the \\(g_m\\)’s are magnitudes. For one inverter,\n\n\\[\nR_{\\text{inv}}=\\frac{1}{G_p}+\\frac{1}{G_n}.\n\\]\n\nThe three inverters are in parallel from the supply node to ground, so\n\n\\[\n\\boxed{\nR_X=\\frac{1}{3}\\left(\\frac{1}{g_{mp}+g_{dsp}}+\n\\frac{1}{g_{mn}+g_{dsn}}\\right)\n}\n\\]\n\nor, neglecting output conductance,\n\n\\[\n\\boxed{\nR_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mp}}+\\frac{1}{g_{mn}}\\right)\n}\n\\]\n\nFor matched devices with \\(g_{mp}=g_{mn}=g_m\\),\n\n\\[\n\\boxed{R_X \\approx \\frac{2}{3g_m}}.\n\\]\n\nThis is the dc small-signal resistance about the symmetric bias point; the supply impedance of a real free-running ring oscillator is time-varying and frequency-dependent.",
        "format": "markdown",
        "sha256": "63ff77224206d79ed29ff3c500881c8967ba672a4fb11edbef1ab95ab1b9d2d9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer consistently derives a static, gm-based resistance but misses the dominant oscillation-driven charging and discharging of the node capacitances that sets the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3147,
        "output_tokens": 12784,
        "total_tokens": 15931,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3147,
        "output_tokens": 12784,
        "total_tokens": 15931,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It cannot be determined uniquely from the schematic as drawn.\n\nFor a ring oscillator, the “small-signal resistance” looking into the supply node is not a simple fixed resistor. It depends on the inverter implementation, bias point, oscillation state, frequency of the small-signal perturbation, load capacitances, device \\(g_m\\), output resistances, etc.\n\nIf one applies a small perturbation \\(v_x\\) at the supply and measures the resulting supply current perturbation \\(i_x\\), then formally\n\n\\[\nR_x=\\frac{v_x}{i_x}\n\\]\n\nor, at low frequency using the averaged supply current,\n\n\\[\nR_x \\approx \\left(\\frac{d I_{DD}}{d V_{DD}}\\right)^{-1}.\n\\]\n\nBut for an operating ring oscillator the circuit is periodically time-varying, so the supply impedance is generally frequency-dependent and can even have phase-dependent or negative-resistance behavior at some frequencies. A transistor-level model or a simulated periodic small-signal analysis is needed.\n\nSo the best answer is:\n\n\\[\n\\boxed{\\text{\\(R_x\\) is not determinable from the figure alone; it depends on the actual inverter model and operating condition.}}\n\\]",
        "format": "markdown",
        "sha256": "1840c9de120b5967ed9ffb2fcaa943fa5bc1684ee5f506bff0eda9094d1e2486"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer does not identify the dominant oscillation-driven charging and discharging of the node capacitances or give the resulting resistance (about 1/(3 f0 CL), with possible frequency-dependence refinement). Its general caveats about supply impedance are relevant but do not answer the intended question.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3147,
        "output_tokens": 4920,
        "total_tokens": 8067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3147,
        "output_tokens": 4920,
        "total_tokens": 8067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — **if you mean the resistance of the oscillator while it is actually running**, that simple result generally does **not** apply.\n\nThe expression\n\n\\[\nR_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n\\]\n\nis the small-signal resistance around the **static symmetric dc operating point** where all three inverter input/output nodes sit near the switching point. Around that artificial dc point, each inverter indeed looks like a PMOS diode-connected device in series with an NMOS diode-connected device, and the three stages appear in parallel.\n\nBut a real ring oscillator does not stay at that point. In oscillation:\n\n- the node voltages are large periodic waveforms,\n- the transistor \\(g_m\\)’s are time-varying,\n- most of the supply current is dynamic charging/discharging current,\n- the circuit is a periodically time-varying system, not an LTI small-signal resistor.\n\nSo there is no single, time-invariant “small-signal resistance” unless you define exactly what measurement you want.\n\nFor example, if you define a low-frequency or dc incremental supply resistance using the **average** supply current,\n\n\\[\nR_{\\text{eff}}=\\left(\\frac{d\\langle I_{DD}\\rangle}{dV_{DD}}\\right)^{-1},\n\\]\n\nthen for a CMOS ring oscillator the average current is roughly\n\n\\[\n\\langle I_{DD}\\rangle \\approx 3 C_{\\text{eff}} V_{DD} f_{\\text{osc}}(V_{DD}) + I_{\\text{sc}} + I_{\\text{leak}},\n\\]\n\nso\n\n\\[\n\\frac{d\\langle I_{DD}\\rangle}{dV_{DD}}\n\\approx\n3C_{\\text{eff}}\\left[f_{\\text{osc}}+V_{DD}\\frac{df_{\\text{osc}}}{dV_{DD}}\\right]\n+\\frac{dI_{\\text{sc}}}{dV_{DD}}+\\frac{dI_{\\text{leak}}}{dV_{DD}}.\n\\]\n\nThat is not the same as the diode-connected-device expression.\n\nSo the short answer is:\n\n\\[\n\\boxed{\\text{The quoted } R_X \\text{ is valid only for the non-oscillating dc bias point.}}\n\\]\n\nFor the actual oscillating circuit, the supply impedance must be defined and computed around the periodic steady state, e.g. with PSS/PAC analysis, or by differentiating the average supply current with respect to \\(V_{DD}\\).",
        "format": "markdown",
        "sha256": "84ad7087b65bb71795b0cd31fd6de174afeb787adb142fe295f2c96b07165a17"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies capacitive charging and discharging as the main oscillating-current mechanism, but does not compare the resulting resistance with the static estimate or establish that it remains on the order of the MOS on-resistance. Instead, it leaves the key magnitude conclusion unresolved.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3227,
        "output_tokens": 4695,
        "total_tokens": 7922,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3227,
        "output_tokens": 4695,
        "total_tokens": 7922,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — if you mean the resistance of the **running oscillator**. More precisely, the original answer applies only to the **static small-signal linearization about the symmetric dc operating point** where all three inverter inputs/outputs sit at the switching point.\n\nAt that dc point, by symmetry, a small perturbation on the supply makes each inverter look roughly like\n\n\\[\n\\frac{1}{g_{mp}}+\\frac{1}{g_{mn}}\n\\]\n\nfrom \\(V_{DD}\\) to ground, and the three stages are in parallel, giving\n\n\\[\nR_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n\\]\n\nignoring \\(r_o\\), body effect, capacitances, etc. That is a **small-signal resistance around the unstable dc equilibrium**.\n\nBut once the ring oscillator is actually oscillating, there is no time-invariant dc operating point. The MOSFET \\(g_m\\)’s, node voltages, and conduction states are all periodic functions of time. The supply current is mostly dynamic switching current plus short-circuit current during transitions, not a static diode-connected current path. Therefore the supply “resistance” is not a single constant given by that formula.\n\nFor a running oscillator, possible definitions are different:\n\n- **DC/low-frequency averaged supply resistance:**\n\n\\[\nR_{\\text{dyn}}=\\left(\\frac{d\\overline{I}_{DD}}{dV_{DD}}\\right)^{-1}\n\\]\n\nwhere \\(\\overline{I}_{DD}\\) is the average supply current of the oscillating circuit.\n\nFor an approximate CMOS ring oscillator,\n\n\\[\n\\overline{I}_{DD} \\approx 3 C_L V_{DD} f_{\\text{osc}}(V_{DD}) + I_{\\text{sc}}\n\\]\n\nso\n\n\\[\nR_{\\text{dyn}}^{-1} \\approx 3 C_L\\left(f_{\\text{osc}}+V_{DD}\\frac{df_{\\text{osc}}}{dV_{DD}}\\right)+\\frac{dI_{\\text{sc}}}{dV_{DD}}\n\\]\n\nwhich is generally not equal to the diode-connected expression.\n\n- **AC supply impedance while oscillating:** this is a periodically time-varying, frequency-converting impedance. A small sinusoid injected at the supply can produce current components at sidebands around the oscillation frequency. This requires PSS/PAC or periodic small-signal analysis, not ordinary dc small-signal analysis.\n\nSo the short answer is:\n\n\\[\n\\boxed{\\text{The given } R_X \\text{ is valid only at the non-oscillating dc bias point.}}\n\\]\n\nFor the actual oscillating ring oscillator, the supply impedance must be defined and computed differently.",
        "format": "markdown",
        "sha256": "42f0c0863a76529974b3b36b3061f8a3b5033d8fdf1b293fbd11f9779ea2708e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the dynamic capacitive supply current and gives an averaged-current expression, but does not show that the resulting resistance remains on the order of the MOS on-resistance rather than becoming much higher. The central magnitude comparison is missing.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3227,
        "output_tokens": 4738,
        "total_tokens": 7965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3227,
        "output_tokens": 4738,
        "total_tokens": 7965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — **if you mean the resistance of the running oscillator**, the answer generally changes, and the simple expression is no longer the right model.\n\nThe expression\n\n\\[\nR_X \\simeq \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n\\]\n\nis a **small-signal result around the symmetric dc operating point** where all inverter inputs and outputs sit near the switching point. In that special bias condition, by symmetry, each inverter’s input and output move together for a supply perturbation, so each inverter looks roughly like an NMOS and PMOS diode-connected in series. Three identical inverters in parallel gives the factor \\(1/3\\).\n\nBut that operating point is the **metastable/startup point** of the ring oscillator. Once the oscillator is running:\n\n- the internal nodes are large-signal time-varying waveforms;\n- the transistors are not continuously biased near the switching point;\n- \\(g_{mn}\\) and \\(g_{mp}\\) are time-varying;\n- the inverters are not equivalent to diode-connected devices in series;\n- the supply current consists of switching/charging pulses and short-circuit current;\n- the “small-signal resistance” becomes a time-periodic or frequency-dependent quantity.\n\nSo for the running oscillator, there is no single time-invariant small-signal resistance equal to that expression. A more meaningful low-frequency quantity would be something like\n\n\\[\nR_{\\text{eff}}=\\left(\\frac{d\\langle I_{DD}\\rangle}{dV_{DD}}\\right)^{-1}\n\\]\n\nwhere \\(\\langle I_{DD}\\rangle\\) is the average supply current of the oscillating circuit. For an AC supply perturbation, one would need a periodic small-signal/PSS-PAC or harmonic-balance analysis, because supply perturbations can mix with the oscillation frequency.\n\nSo the short answer is:\n\n> The formula is valid only for the small-signal linearization about the non-oscillating symmetric bias point. For the actual oscillating circuit, the supply “resistance” is generally different and is not simply \\(\\frac{1}{3}(1/g_{mn}+1/g_{mp})\\).",
        "format": "markdown",
        "sha256": "5ba22ce349d7adc47c8c5b5142e1b1858983d43ddaf85c5db24f689227288164"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that the static small-signal model does not directly describe a running oscillator, but it omits the key result: supply resistance is set by charging and discharging node capacitances and remains on the order of the MOS on-resistance, not much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3227,
        "output_tokens": 3584,
        "total_tokens": 6811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3227,
        "output_tokens": 3584,
        "total_tokens": 6811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As the width of **M7** increases, the **initial voltage gain decreases**.\n\nM7 is the tail transistor. Increasing its width increases the tail current, so the internal nodes discharge faster and the latch enters regeneration sooner. However, the input pair has less time to develop an initial differential voltage, so the initial gain is reduced.\n\nA common approximation is:\n\n\\[\nA_{v0} \\propto \\frac{g_{m1}}{I_{\\text{tail}}}\n\\]\n\nand since increasing \\(W_7\\) increases \\(I_{\\text{tail}}\\), the initial gain drops, roughly like:\n\n\\[\nA_{v0} \\propto \\frac{1}{\\sqrt{I_{\\text{tail}}}}\n\\]\n\nSo, larger \\(W_7\\) gives faster operation but smaller initial voltage gain.",
        "format": "markdown",
        "sha256": "c5ff0684d56a7b1e008ec324937dd4aa1da6e66b5ca4dfee4aafc03eab53552e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that increasing M7 width raises tail current and decreases initial gain, with a consistent gm-to-tail-current explanation. The added faster-discharge explanation is compatible with the shorter integration interval.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 5356,
        "total_tokens": 10159,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 5356,
        "total_tokens": 10159,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As the width of **M7** increases, the **initial voltage gain decreases**.\n\nM7 is the clocked tail transistor. Making it wider increases the tail current, so the internal nodes discharge faster. Although the input-pair transconductance \\(g_m\\) increases, the available amplification time before regeneration starts becomes shorter. The initial gain is roughly\n\n\\[\nA_0 \\propto \\frac{g_{m1,2}}{I_D}\n\\]\n\nand \\(g_m/I_D\\) decreases as the tail current increases.  \n\nSo, a wider M7 gives **higher speed**, but **lower initial/pre-regeneration voltage gain**.",
        "format": "markdown",
        "sha256": "c52ac43ccb4aaa9283cfdab8f40172cdf7768084bdd073f3483e92054948c1a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that initial gain decreases as M7 widens and explains that increased tail current reduces the relevant gm/current gain factor. The extra speed comment does not undermine the essential answer.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3840,
        "input_tokens": 4803,
        "output_tokens": 7557,
        "total_tokens": 12360,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3840,
        "input_tokens": 4803,
        "output_tokens": 7557,
        "total_tokens": 12360,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As the width of **M7** increases, the **initial voltage gain decreases**.\n\nReason: M7 is the clocked tail transistor. Increasing its width increases the tail current, so the output nodes discharge faster. This shortens the initial amplification/pre-regeneration time, reducing the voltage difference developed at the latch input nodes.\n\nA common approximation is:\n\n\\[\nA_{v0} \\approx \\frac{g_{m1,2}|V_{TP}|}{I_{\\text{tail}}}\n\\]\n\nSince \\(I_{\\text{tail}}\\) increases with \\(W_7\\), the initial gain tends to fall, even though the comparator becomes faster.",
        "format": "markdown",
        "sha256": "5f2c580e32b8a0e0eb3ed361c8722fc171e86d46e21d25554ebc5b8878ebc287"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M7 raises tail current and decreases initial gain, with a consistent integration-time explanation and inverse-current gain relation. The VTP notation differs from the golden solution’s VTHN, but does not affect the essential trend or reasoning.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3840,
        "input_tokens": 4803,
        "output_tokens": 6355,
        "total_tokens": 11158,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3840,
        "input_tokens": 4803,
        "output_tokens": 6355,
        "total_tokens": 11158,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at nodes **P** and **Q** increases the **initial voltage gain** of this latch/comparator, approximately as\n\n\\[\nA_{v0} \\propto \\frac{C_{P,Q}}{C_{X,Y}}\n\\]\n\nor more specifically,\n\n\\[\nA_{v0}\\approx \\frac{g_m}{I_D}V_{THn}\\frac{C_{P,Q}}{C_{X,Y}}\n\\]\n\nassuming other parameters stay fixed.\n\nIntuitively, larger capacitance at **P/Q** makes those nodes discharge more slowly, so the input-dependent discharge-time difference between the two sides becomes larger. That creates a larger initial differential voltage at the output nodes **X/Y** before regeneration starts.\n\nHowever, the tradeoff is that the comparator becomes **slower**, because P and Q take longer to fall. So: **gain increases, but speed decreases.**",
        "format": "markdown",
        "sha256": "a348946230003a0020431b164f2eb88ede7187d941d5fbd2946381515ad26492"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance slows the discharge, but incorrectly concludes that the initial gain increases. The longer amplification interval is canceled by the slower voltage change, so the initial gain remains approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 8480,
        "total_tokens": 13283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 8480,
        "total_tokens": 13283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If the capacitance at **both P and Q is increased equally**, the **initial voltage gain is ideally unchanged**.\n\nReason: the differential voltage at P/Q builds more slowly because\n\n\\[\n\\frac{d\\Delta V_{PQ}}{dt}\\propto \\frac{1}{C_{P,Q}}\n\\]\n\nbut the latch also takes proportionally longer to reach the point where regeneration starts:\n\n\\[\nt_0 \\propto C_{P,Q}\n\\]\n\nSo the two effects cancel:\n\n\\[\n\\Delta V_{PQ}(t_0)\\approx \\frac{\\Delta I}{C_{P,Q}}t_0\n\\]\n\nand the initial gain at the start of regeneration is roughly independent of \\(C_{P,Q}\\).\n\nHowever, increasing the capacitance at P and Q **does slow the circuit down** and increases evaluation delay. At a fixed time after the clock edge, the voltage difference would be smaller, but at the regeneration-start point the ideal initial gain is about the same.",
        "format": "markdown",
        "sha256": "2981f7ec5ba349fcd173929f68bb55ef8c9f43be68194d858012aa11f607319a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the initial gain remains essentially unchanged: the larger capacitance slows differential buildup but proportionally lengthens the amplification phase, so the effects cancel. It also correctly notes the increased delay.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3840,
        "input_tokens": 4803,
        "output_tokens": 7980,
        "total_tokens": 12783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3840,
        "input_tokens": 4803,
        "output_tokens": 7980,
        "total_tokens": 12783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at nodes **P** and **Q** generally **increases the initial voltage gain** of this StrongARM/dynamic latch comparator, because the P/Q nodes discharge more slowly, giving the input differential pair more time to develop a differential signal before strong regeneration begins.\n\nBut the tradeoff is important:\n\n- **Initial gain increases** / input sensitivity improves.\n- **Decision time increases** because P and Q take longer to discharge.\n- So the comparator becomes **slower** and may consume more dynamic energy.\n\nSo: **larger capacitance at P and Q → higher initial gain, but slower regeneration/longer delay.**",
        "format": "markdown",
        "sha256": "b6ca7a32aa08cc70ed2d928d8a65eefc324374b8ec700429819ad61ecbb3cb68"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance slows the discharge, but incorrectly concludes that this increases initial gain. The longer amplification phase is proportional to capacitance, which cancels its effect on the differential-voltage slope, leaving initial gain essentially unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3840,
        "input_tokens": 4803,
        "output_tokens": 12567,
        "total_tokens": 17370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3840,
        "input_tokens": 4803,
        "output_tokens": 12567,
        "total_tokens": 17370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of **M5 and M6** can do **both**, depending on where you are in sizing.\n\n- **Wider M5/M6 → larger \\(g_m\\)** and stronger PMOS positive feedback, so latch regeneration can become faster.\n- But wider M5/M6 also add more **gate/drain parasitic capacitance** at nodes \\(X\\) and \\(Y\\), so the input pair and latch must charge/discharge more capacitance, which slows the decision.\n\nSo the speed is **not monotonically improved** by increasing M5/M6. Usually:\n\n\\[\n\\tau_{\\text{regen}} \\approx \\frac{C_{X,Y}}{g_{m,n}+g_{m,p}}\n\\]\n\nIncreasing M5/M6 increases both \\(g_{m,p}\\) and \\(C_{X,Y}\\). If M5/M6 are too small, increasing them may improve speed; if they are already large, further increase will likely **degrade speed** due to added capacitance.\n\n**Bottom line:** there is an optimum width. Blindly increasing M5/M6 does not always improve speed; excessive sizing degrades it.",
        "format": "markdown",
        "sha256": "6af144db4e2ff16a5352015d179ba28994d2696544422a50c9cf0b4911a157f3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that wider M5/M6 initially strengthen regeneration and improve speed, while added node capacitance eventually limits the benefit and can degrade speed, yielding an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 5103,
        "total_tokens": 9905,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4857,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 5103,
        "total_tokens": 9905,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4857,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Neither universally. Increasing the widths of **M5/M6** has two opposite effects:\n\n- **Improves regeneration:** M5/M6 are the cross-coupled PMOS latch devices, so larger width gives larger \\(g_m\\) and stronger positive feedback.\n- **Degrades capacitive delay:** larger M5/M6 add more gate/drain capacitance on nodes \\(X\\) and \\(Y\\), which must be charged/discharged during evaluation.\n\nSo the delay roughly behaves like\n\n\\[\nt_{\\text{reg}} \\sim \\frac{C_{X,Y}}{g_{m,n}+g_{m,p}}\n\\]\n\nand increasing \\(W_{5,6}\\) increases both \\(g_{m,p}\\) and \\(C_{X,Y}\\).\n\n**Practical answer:** if M5/M6 are too small, widening them can improve speed; beyond an optimum, the added capacitance dominates and speed degrades. So speed is not monotonically improved by increasing M5/M6 widths—you must size/simulate for the optimum.",
        "format": "markdown",
        "sha256": "1943adfe36484ab969686751b785c430d5b245cdea3de714cd41fac2c0aca421"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M5/M6 initially strengthens regeneration and improves speed, while added node capacitance eventually limits the benefit and can cause degradation beyond an optimum.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3840,
        "input_tokens": 4802,
        "output_tokens": 4883,
        "total_tokens": 9685,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3840,
        "input_tokens": 4802,
        "output_tokens": 4883,
        "total_tokens": 9685,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not unconditionally.\n\nIncreasing the widths of **M5 and M6** strengthens the cross-coupled PMOS latch devices, so their \\(g_m\\) and pull-up/positive-feedback strength increase. That can **improve regeneration speed** if M5/M6 were too weak.\n\nBut wider M5/M6 also add significant parasitic capacitance at the internal/output nodes \\(X\\) and \\(Y\\) — drain capacitance on one side and gate capacitance loading the opposite side. That extra capacitance slows the initial discharge and increases the node time constant.\n\nSo the practical answer is:\n\n**Speed improves only up to an optimum size; beyond that, increasing M5/M6 degrades speed due to added capacitance.**\n\nIn many dynamic/sense-amplifier latches, oversizing the PMOS cross-coupled pair M5/M6 gives diminishing returns or even slower operation. Simulating delay versus width is usually needed to find the optimum.",
        "format": "markdown",
        "sha256": "dbd5d8091c6e61f42c70f4e4bdeb7e6a745b6faae2d2452b5f558bd866da4f89"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M5/M6 initially improves speed through stronger regeneration, while added capacitance eventually limits the benefit and can degrade speed beyond an optimum.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3840,
        "input_tokens": 4802,
        "output_tokens": 7453,
        "total_tokens": 12255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3840,
        "input_tokens": 4802,
        "output_tokens": 7453,
        "total_tokens": 12255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It is **not guaranteed to improve**. Increasing the widths of the clocked transistors has two opposite effects:\n\n- **Good effect:** their ON resistance decreases, so the pull-up/pull-down path through the clocked devices becomes stronger.\n- **Bad effect:** their diffusion capacitances at nodes like **X** and **Y** increase, and their gate capacitance also increases the **clock load**. The larger internal capacitance can slow the node transitions and make the clock harder to drive.\n\nSo the speed has an **optimum sizing**. If the clocked devices are very small and dominate the series resistance, upsizing them can initially improve speed. But after some point, the extra capacitance dominates and the speed **degrades**.\n\nFor this kind of clocked CMOS/TSPC-style circuit, blindly increasing the clocked transistor widths usually **degrades speed beyond the optimum** because it loads the dynamic/internal nodes and the clock heavily.",
        "format": "markdown",
        "sha256": "052c8e83be5ef389036d8d2e9ff8ddf15dd9a07c85f14e8e015a327621001393"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by reducing on-resistance, while added capacitance eventually limits or reverses the benefit, producing an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 1751,
        "total_tokens": 3814,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 1751,
        "total_tokens": 3814,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Neither universally. There is a tradeoff.\n\nIncreasing the width of the clocked transistors:\n\n- **Improves speed** by reducing their ON resistance, so nodes \\(X\\) and \\(Y\\) can charge/discharge faster.\n- **Degrades speed** by increasing parasitic diffusion capacitance at \\(X\\) and \\(Y\\), and by increasing the capacitive load on the clock/\\(\\overline{CK}\\) drivers.\n\nA rough delay term is\n\n\\[\nt_p \\sim \\left(R_{\\text{logic}} + R_{\\text{clk}}\\right)\n\\left(C_{\\text{fixed}} + C_{\\text{clk-diff}}\\right)\n\\]\n\nwhere\n\n\\[\nR_{\\text{clk}} \\propto \\frac{1}{W_{\\text{clk}}}, \\qquad\nC_{\\text{clk-diff}} \\propto W_{\\text{clk}}.\n\\]\n\nSo if the clocked devices are initially too small, widening them can improve speed. But after some point, the extra capacitance dominates and the circuit becomes slower. In practice, there is an optimum clocked-transistor width; blindly making them larger can degrade the maximum speed, especially when clock loading is included.",
        "format": "markdown",
        "sha256": "6142f62b7f4e7de613095011c04e5fdb7d736104da20cfb307601f283ac09956"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by lowering on-resistance, while added capacitance eventually limits or reverses the benefit, giving an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 5955,
        "total_tokens": 8018,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 5955,
        "total_tokens": 8018,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the **clocked transistors** does **not always improve speed**. It has two opposite effects:\n\n1. **Improves speed initially:**  \n   Wider clocked transistors have lower ON resistance, so when the latch is transparent, nodes \\(X\\) and \\(Y\\) can charge/discharge faster.\n\n2. **Degrades speed if made too large:**  \n   Wider devices add more diffusion/parasitic capacitance to internal nodes \\(X\\) and \\(Y\\), and also increase the clock load. That extra capacitance must be charged/discharged every cycle, so beyond some size the delay can increase.\n\nSo the correct answer is:\n\n**Speed improves only up to an optimum clock-transistor width; after that, increasing the widths degrades speed due to increased parasitic capacitance and clock loading.**\n\nIn practice, if the clocked devices are too small, sizing them up helps. If they are already reasonably sized, making them larger may slow the circuit and increase power.",
        "format": "markdown",
        "sha256": "d82f766ea02d73a97f24c5a348fe047888d0f5b92d010fa787ee2b28fcb7d85e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by reducing clocked-device on-resistance, while added node capacitance eventually limits or reverses the benefit, giving an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 3318,
        "total_tokens": 5381,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 3318,
        "total_tokens": 5381,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—**in the ideal digital sense, it can provide quadrature divided-by-2 outputs**, if you take the proper nodes and the input clock has ~50% duty cycle.\n\nThe circuit is essentially a master–slave divide-by-2 latch/flip-flop:\n\n- When **CK = 1**, the left latch is transparent, so  \n  \\[\n  X \\leftarrow \\overline{Z}\n  \\]\n  while the right latch holds.\n\n- When **CK = 0**, the right latch is transparent, so  \n  \\[\n  Y \\leftarrow \\overline{X},\\quad Z \\leftarrow X\n  \\]\n  while the left latch holds.\n\nThus \\(X\\) changes on one clock edge and \\(Z\\) changes on the opposite clock edge. Since the divided output period is \\(2T_{CK}\\), the separation of half an input-clock period is:\n\n\\[\n\\frac{T_{CK}/2}{2T_{CK}} = \\frac{1}{4} = 90^\\circ\n\\]\n\nSo with a 50% duty-cycle clock:\n\n- \\(X\\) and \\(Z\\) are quadrature at \\(f_{CK}/2\\).\n- \\(Y\\) is just the complement of \\(Z\\), so \\(X\\) and \\(Y\\) are also quadrature but with opposite phase sense.\n\nCaveats:\n\n- The quadrature accuracy depends on clock duty cycle and propagation-delay matching.\n- \\(X\\) and \\(Y\\) are internal dynamic nodes, so they should be buffered if used as outputs.\n- The circuit does not generate quadrature at the input frequency; it generates quadrature at half the clock frequency.",
        "format": "markdown",
        "sha256": "b71fbe6fef6269eaf94d467c8f306509081d8ace60f775fd4195def15e3887a5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-2 quadrature and the 90° half-clock-period relationship. It gives only generic duty-cycle and delay caveats, without explaining the specific effects of Inv3 delay on Z and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 8127,
        "total_tokens": 10175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 8127,
        "total_tokens": 10175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — **ideally it can provide quadrature outputs**, but with some qualifications.\n\nThe circuit is essentially a **divide-by-2 master–slave latch structure**. Nodes **X** and **Z** toggle on alternate clock edges:\n\n- When **CK = 1**, the left latch is transparent, so roughly  \n  \\[\n  X = \\overline{Z}\n  \\]\n- When **CK = 0**, the right latch is transparent and the inverter produces  \n  \\[\n  Z = X\n  \\]\n\nSo the state sequence can be, for example:\n\n\\[\n(X,Z):\\quad 10 \\rightarrow 11 \\rightarrow 01 \\rightarrow 00 \\rightarrow 10\n\\]\n\nThus **X and Z are both at \\(f_{CK}/2\\)** and are separated by one half-period of the input clock. If the input clock has a **50% duty cycle**, that time shift is:\n\n\\[\n\\frac{T_{CK}/2}{2T_{CK}} \\times 360^\\circ = 90^\\circ\n\\]\n\nSo **X and Z form a quadrature pair** at half the clock frequency. Node **Y** is just the complement of **Z**, so \\(Y\\) and \\(Z\\) are differential, not quadrature.\n\nCaveats:\n\n- Exact 90° quadrature requires a near-50% duty-cycle input clock.\n- Propagation-delay mismatch will introduce phase error.\n- Node **X** is an internal dynamic node, so it should be buffered if used as an output.\n\nSo the short answer is: **Yes, X and Z can be quadrature outputs, ideally at \\(f_{CK}/2\\), provided the clock duty cycle and delays are well controlled.**",
        "format": "markdown",
        "sha256": "7fae7bd0a419373e2e2cd0bdcc78b1db3b61e569b484505d6b5a2d5e53b3b596"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature at X and Z and notes timing-related phase error. It does not explain both key departures from exact quadrature: Inv3 delay skewing Z and unequal loading of the two latches.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 6064,
        "total_tokens": 8112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 6064,
        "total_tokens": 8112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—**nominally**, the structure can provide quadrature phases, but the quadrature nodes are internal unless you buffer them.\n\nIt behaves as a divide-by-2 made from two latches:\n\n- During one clock phase, node **X** updates.\n- During the opposite clock phase, node **Y/Z** updates.\n- Therefore **X** and **Z** switch on opposite edges of the input clock.\n\nIf the input clock period is \\(T_{CK}\\), the divided output period is \\(2T_{CK}\\). Since X and Z are separated by about \\(T_{CK}/2\\), that corresponds to\n\n\\[\n\\frac{T_{CK}/2}{2T_{CK}} \\cdot 360^\\circ = 90^\\circ\n\\]\n\nSo **X and Z are approximately in quadrature** at the divided frequency. Node **Y** is simply the complement of Z, so it is the opposite quadrature phase.\n\nCaveats:\n\n- The clock duty cycle must be close to 50%.\n- Propagation-delay mismatch causes phase error.\n- X and Y are dynamic/internal nodes, so they should be buffered if used as outputs.\n\nSo: **yes, ideally X and Z provide quadrature divided-by-2 outputs, but practical buffering/matching is needed.**",
        "format": "markdown",
        "sha256": "8511d5bba3b77043c2ccae3b6232ce404a5539ee150b9d4489c1e9aaf19f62f2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature and explains the 90° timing relationship. It notes phase error from delay mismatch, but does not explain both the Inv3 delay and unequal latch loading that make the outputs non-ideal.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 6487,
        "total_tokens": 8535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 6487,
        "total_tokens": 8535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors does **not necessarily improve speed**. It is a tradeoff.\n\n- **Benefit:** Wider clocked transistors have lower on-resistance, so the clocked inverter/latch can charge or discharge its internal node faster.\n- **Penalty:** Wider devices add more parasitic capacitance:\n  - larger clock load, slowing the clock edge if the clock driver is nonideal;\n  - larger diffusion capacitance at the internal series nodes;\n  - more charge injection/clock feedthrough.\n\nSo:\n\n\\[\n\\text{small clocked devices} \\rightarrow \\text{slow because } R_{\\text{on}} \\text{ is large}\n\\]\n\n\\[\n\\text{very large clocked devices} \\rightarrow \\text{slow because parasitic/loading dominates}\n\\]\n\nTherefore the speed usually **improves up to an optimum width**, then **degrades** if the clocked transistors are made too wide. If the clock is assumed ideal and the devices are initially undersized, increasing their width can improve delay, but in a real circuit excessive clocked-device sizing often hurts the maximum speed.",
        "format": "markdown",
        "sha256": "4e01894c09ee8119b7b2e171b87ddc27eafd616bd9c603c5daf0dcf2054d17fd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the lower on-resistance benefit and predicts an initial speed improvement, but omits charge sharing, which the full-credit rule requires as the limiting effect.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 5417,
        "total_tokens": 7547,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 5417,
        "total_tokens": 7547,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It is **not guaranteed to improve**; there is a tradeoff.\n\nIncreasing the widths of the clocked transistors does two things:\n\n1. **Improves drive strength**  \n   Their ON resistance decreases, so the enabled pull-up/pull-down path is stronger. This tends to reduce the latch/inverter delay.\n\n2. **Increases capacitance**  \n   Their gate capacitance loads the clock network, and their diffusion capacitances load internal nodes. This slows the clock edges and increases parasitic delay and power.\n\nSo:\n\n- If the clock is assumed **ideal** with fixed rise/fall time, making the clocked transistors wider usually **improves speed at first**, then gives diminishing returns.\n- In a real circuit with a finite clock driver, making them too wide can **degrade overall speed** because the clock load increases.\n\nTherefore the speed has an **optimum** transistor width; arbitrarily increasing the clocked-transistor widths is not always beneficial.",
        "format": "markdown",
        "sha256": "94d203435efeeebd72ebf52f358d4fa8892839f6742a74ee5baa5cf8070f264f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies that wider clocked devices reduce on-resistance and can improve speed initially. However, it omits the topology-specific charge-sharing effect and makes the optimum-width conclusion depend mainly on clock-driver loading rather than the key internal-node behavior.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 6419,
        "total_tokens": 8549,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 6419,
        "total_tokens": 8549,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors does **not** automatically make the circuit faster.\n\nThere are two competing effects:\n\n1. **Wider clocked devices have lower ON resistance**  \n   → the clocked inverter/latch can charge or discharge internal nodes faster.  \n   → this can **improve** clock-to-output delay if those devices were the bottleneck.\n\n2. **Wider clocked devices add capacitance**  \n   → larger gate capacitance on `CK`/`\\overline{CK}` loads the clock driver.  \n   → larger diffusion/parasitic capacitance at internal nodes increases the charge that must be moved.  \n   → clock feedthrough/noise can also increase.  \n   → this can **degrade** maximum speed, especially if the clock driver is not ideal.\n\nSo the correct answer is:\n\n**Speed improves only up to an optimum clock-transistor size; beyond that, increasing their widths degrades overall speed.**  \n\nIf the clock is assumed ideal and the clocked transistors are initially too small, widening them may improve the local latch delay. But in a real circuit, excessive widening usually hurts because the added clock and parasitic capacitance dominate.",
        "format": "markdown",
        "sha256": "9fcefbfceb964344eb8cce3507fdb894cfe6268e017c44edb9fdfb47bbec7925"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that wider clocked devices reduce on-resistance and can initially improve speed. However, it omits charge sharing and overstates clock and parasitic capacitance as reasons speed must degrade beyond an optimum; full credit requires recognizing charge sharing as the limiting effect.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 6982,
        "total_tokens": 9112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 6982,
        "total_tokens": 9112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume each clocked switch is closed when its label is logic 1.\n\nLet\n\n- \\(A\\) = input of \\(Inv_1\\)\n- \\(B\\) = output of \\(Inv_1\\)\n- \\(C\\) = input of the second inverter\n- \\(Q\\) = output of the last inverter, fed back along the bottom wire\n\nThe last two inverters form a non-inverting buffer, so after settling\n\n\\[\nQ = C\n\\]\n\n### When \\(CK=1\\)\n\nThe left switch is closed and the \\(\\overline{CK}\\) switch is open.\n\n\\[\nA = Q\n\\]\n\nThe output of \\(Inv_1\\) becomes\n\n\\[\nB = \\overline{A}=\\overline{Q}\n\\]\n\nBut \\(B\\) is disconnected from \\(C\\), so the right-hand two-inverter section simply holds its previous value dynamically.\n\n### When \\(CK=0\\)\n\nThe left switch opens and the \\(\\overline{CK}\\) switch closes. Now the stored value at \\(A\\) is inverted by \\(Inv_1\\) and passed to \\(C\\):\n\n\\[\nC = B = \\overline{A}\n\\]\n\nSince \\(A\\) was previously equal to \\(Q\\),\n\n\\[\nC = \\overline{Q}\n\\]\n\nand because \\(Q=C\\) after the two inverters,\n\n\\[\nQ_{\\text{new}}=\\overline{Q_{\\text{old}}}\n\\]\n\nSo the output toggles.\n\n### Result\n\nThe circuit behaves like a dynamic toggle flip-flop, or divide-by-2 circuit. The output \\(Q\\) changes state once per clock cycle, specifically after the \\(CK\\) falling edge, assuming the first switch is controlled by \\(CK\\) and the second by \\(\\overline{CK}\\).\n\n\\[\nQ_{n+1}=\\overline{Q_n}\n\\]\n\nSo:\n\n\\[\nf_Q = \\frac{f_{CK}}{2}\n\\]\n\n### Important practical note\n\nThis is a dynamic circuit: during one clock phase, some internal nodes are floating and hold charge only capacitively. Also, if both switches are ever closed at the same time, the three inverters form an odd-inverter ring, which can oscillate or race. Therefore the two clock phases should ideally be non-overlapping.",
        "format": "markdown",
        "sha256": "7b818fc0d89df39f92bf6feed56a7b0fcf2d1174e853eeac6b14e6cb8463d321"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic toggle/divide-by-two circuit and gives the half-frequency result. The golden solution makes detailed internal signal-path analysis optional.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 7233,
        "total_tokens": 8523,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 7233,
        "total_tokens": 8523,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **clocked inverter loop** that behaves as a **toggle flip-flop**, or equivalently a **divide-by-2 frequency divider**.\n\nLabel the final output node as \\(Q\\). The two switches are controlled by complementary clocks:\n\n- Left switch closes when \\(CK=1\\).\n- Middle switch closes when \\(\\overline{CK}=1\\), i.e. when \\(CK=0\\).\n\n### Operation\n\n#### 1. When \\(CK = 1\\)\n\n- The left switch is closed.\n- The middle switch is open.\n- The output \\(Q\\) is fed back to the input of \\(Inv_1\\).\n- \\(Inv_1\\) produces \\(\\overline{Q}\\), but that value is not passed forward because the middle switch is open.\n\nSo during this phase, the circuit prepares the complement of the current output.\n\n#### 2. When \\(CK = 0\\)\n\n- The left switch opens.\n- The middle switch closes.\n- The value stored at the input of \\(Inv_1\\) is still the previous \\(Q\\).\n- The output of \\(Inv_1\\), which is \\(\\overline{Q}\\), is now passed through the two right-hand inverters.\n\nThe two right-hand inverters form a non-inverting buffer, so the final output becomes\n\n\\[\nQ_{\\text{new}} = \\overline{Q_{\\text{old}}}\n\\]\n\nThus the output toggles once every clock cycle.\n\n### State behavior\n\nIf the output before the active transition is \\(Q_n\\), then after the next active clock transition,\n\n\\[\nQ_{n+1} = \\overline{Q_n}\n\\]\n\nSo the output sequence is\n\n\\[\n0,1,0,1,\\dots\n\\]\n\nor\n\n\\[\n1,0,1,0,\\dots\n\\]\n\ndepending on the initial condition.\n\n### Conclusion\n\nThe arrangement acts as a **negative-edge triggered toggle flip-flop** if the left switch is closed for \\(CK=1\\) and the middle switch is closed for \\(CK=0\\). Therefore,\n\n\\[\nf_Q = \\frac{f_{CK}}{2}\n\\]\n\nIt divides the clock frequency by 2. Care must be taken that the two switches are not on at the same time; otherwise the three inverters would form an odd-inverter ring oscillator.",
        "format": "markdown",
        "sha256": "b76fa9f8e57440376bafe66de71ec3b20fb4a16ea928031be2707f68643e1721"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a clocked, dynamically storing toggle divider with output frequency half the clock frequency. The detailed phase and inverter-path description is not essential to the central answer.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 3608,
        "total_tokens": 4898,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 3608,
        "total_tokens": 4898,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the switch labeled **CK** is closed when \\(CK=1\\), and the switch labeled \\(\\overline{CK}\\) is closed when \\(CK=0\\):\n\nLet the rightmost output be \\(Q\\).\n\nThe circuit is a clocked feedback loop made from three inverters and two complementary clocked switches. It behaves as a **negative-edge-triggered toggle flip-flop**, i.e. a **divide-by-2 frequency divider**.\n\n### Operation\n\nLabel the nodes:\n\n\\[\nQ \\rightarrow S_{CK} \\rightarrow X \\rightarrow Inv_1 \\rightarrow Y \\rightarrow S_{\\overline{CK}} \\rightarrow Z \\rightarrow Inv \\rightarrow Inv \\rightarrow Q\n\\]\n\n#### When \\(CK=1\\)\n\n- The left switch is closed.\n- The middle switch is open.\n- Therefore:\n\n\\[\nX = Q\n\\]\n\nand after \\(Inv_1\\):\n\n\\[\nY = \\overline{Q}\n\\]\n\nBut \\(Y\\) is isolated from the last two inverters, so \\(Q\\) does not change yet.\n\nSo during \\(CK=1\\), the circuit “prepares” the complement of the current output.\n\n#### When \\(CK\\) goes low\n\n- The left switch opens, so \\(X\\) holds the old value of \\(Q\\).\n- The middle switch closes.\n- The value \\(Y=\\overline{Q_{\\text{old}}}\\) is passed through the last two inverters.\n\nSince two inverters give no net inversion:\n\n\\[\nQ_{\\text{new}} = Y = \\overline{Q_{\\text{old}}}\n\\]\n\nSo the output toggles on the falling edge of the clock.\n\n### State equation\n\nAt each falling edge:\n\n\\[\nQ_{n+1} = \\overline{Q_n}\n\\]\n\nSo if the initial output is 0:\n\n\\[\n0 \\rightarrow 1 \\rightarrow 0 \\rightarrow 1 \\rightarrow \\cdots\n\\]\n\nThus:\n\n\\[\nf_Q = \\frac{f_{CK}}{2}\n\\]\n\n### Important practical notes\n\n- This is a **dynamic** circuit: some internal nodes float when their switches are open, so leakage limits how long the clock can be stopped.\n- The two clock phases should be non-overlapping. If both switches are closed at the same time, the circuit becomes a closed loop with three inverters, which can race or oscillate.\n- If the switch polarities were reversed, the same idea would work but the toggling edge would be the rising edge instead.\n\nSo the arrangement is essentially a clocked three-inverter loop implementing a **T flip-flop with \\(T=1\\)**, or equivalently a **divide-by-2 counter**.",
        "format": "markdown",
        "sha256": "8aa182c26376a84431d318a3e2961ac6b82265879c2ee78906980080853c67ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic divide-by-two and explains the output toggling once per clock cycle. The detailed internal signal naming is secondary.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 6788,
        "total_tokens": 8078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 6788,
        "total_tokens": 8078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is a **feed-forward/bypass inverter** from the feedback/output node to the node after the first inverter.\n\nIts effect is mixed:\n\n- **When the CK switch is ON**, the first black inverter and the red inverter see the same input, so they both drive the intermediate node to the same value. This can **speed up that node transition** because the effective drive strength is larger and the path bypasses the CK pass switch.\n\n- **But it adds capacitance** to both the feedback node and the intermediate node, increasing dynamic power and potentially slowing other transitions.\n\n- **When the CK switch is OFF and the output changes**, the red inverter may try to drive the intermediate node opposite to what the first black inverter is holding. That creates **contention**, extra short-circuit/static current, and can degrade speed or even cause incorrect operation/racing unless the red inverter is weak, gated, or carefully sized.\n\nSo, in short: **it can improve speed by providing a faster/stronger feed-forward drive, but at the cost of extra loading, power, and possible contention. If implemented as a full-strength always-on inverter, it may hurt performance or break the intended latch/divider behavior.**",
        "format": "markdown",
        "sha256": "be084e864aab697e33dfc145423bc9e7ff3d192c23674ee1638395bd8a4f7cdb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the feedforward bypass and its speed benefit, and recognizes possible off-phase contention. It misses the key low-frequency consequence: the unclocked branch can overpower the latch path and raise the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 9056,
        "total_tokens": 10215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 9056,
        "total_tokens": 10215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the red inverter is really connected to the two data nodes as drawn, it is a **feed-forward bypass inverter** around the `CK` switch + first inverter.\n\nIts effect is mixed, and often dangerous:\n\n- **When `CK` is active and the left switch is closed:**  \n  the red inverter drives the same value as the lower inverter, so it can act like an extra parallel driver. This may make the middle node switch faster, although it also adds extra capacitance.\n\n- **When `CK` is inactive and the `\\overline{CK}` switch is closed:**  \n  the red inverter creates a feedback path through the two right-hand inverters. That path has an odd number of inversions, so it can cause a race/oscillation or make the node fight the value held by the first inverter.\n\nSo the red inverter may improve switching speed in one phase, but it can also:\n\n- increase capacitive loading,\n- increase power due to contention,\n- reduce noise margin,\n- create race-through or multiple toggles,\n- limit reliable operating frequency.\n\nIn short: **it is not just a performance booster; unless it is carefully sized, delayed, or clock-gated, it can degrade or even break the circuit’s operation.**",
        "format": "markdown",
        "sha256": "699bcfb4c6981c6c99b1d48b431dd1bccc516281a0692a990b64506730780110"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the feedforward bypass and its speed benefit, and recognizes the odd-inversion loop and contention. However, it does not state the key low-frequency consequence: the unclocked branch can overpower the main path, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 10103,
        "total_tokens": 11262,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 10103,
        "total_tokens": 11262,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is **not just a harmless extra gate**. With the connections shown, it creates a direct path from the output/feedback node to the node after the first inverter.\n\nLet the left/output feedback node be \\(Q\\), and the node after the first black inverter be \\(X\\).\n\n### During the \\(CK\\) phase\nThe first switch is closed, so the black inverter and the red inverter both drive \\(X\\) to approximately \\(\\overline{Q}\\).\n\nSo in this phase the red inverter can:\n\n- strengthen the drive on \\(X\\),\n- reduce the delay in setting \\(X\\),\n- possibly improve the high-speed operation of that internal node.\n\nBut it also adds:\n\n- extra input capacitance on \\(Q\\),\n- extra load capacitance on \\(X\\),\n- more dynamic power.\n\n### During the \\(\\overline{CK}\\) phase\nThe second switch is closed. The last two black inverters form a non-inverting path from \\(X\\) back to \\(Q\\). The red inverter then creates an odd-inverter feedback loop:\n\n\\[\nQ \\rightarrow \\text{red inverter} \\rightarrow X \\rightarrow \\text{two inverters} \\rightarrow Q\n\\]\n\nThat loop has an odd number of inversions, so it can cause a race or oscillation. In a flip-flop/divider-type circuit, this can make the output toggle more than once during the transparent phase, corrupting the intended operation.\n\nAlso, after the output changes, the red inverter may fight the stored value driven by the first black inverter, causing static current and degraded noise margin.\n\n### Net effect\n\nThe red inverter may improve speed for one internal transition, but it also increases capacitance, power, and can introduce race/oscillation problems. Unless it is intentionally weak, clock-gated, or part of a deliberately designed oscillator, an always-on red inverter connected this way usually hurts robust flip-flop performance.",
        "format": "markdown",
        "sha256": "f91cce5b4e54b49cec415145747a04b450015d02641539d2950cfa34136253af"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It identifies the feedforward path and its potential speed benefit, and recognizes the regenerative loop and contention. However, it omits the key low-frequency consequence: the unclocked branch can dominate at low clock rates, raising the minimum usable frequency. It also overstates the effect as generally harmful.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 8692,
        "total_tokens": 9851,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 8692,
        "total_tokens": 9851,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No — I would not agree with that answer.\n\nA keeper for `Inv1` would have to feed back from the output of `Inv1` to the input of `Inv1`, usually as a weak inverter, so that when the input node is floating the inverter pair forms a static latch.\n\nIn the drawing, the red inverter is not connected that way. Its input is on the feedback/output side of the whole loop, and its output is tied to the node after `Inv1`. So it is a feed-forward/bypass inverter, not a cross-coupled keeper with `Inv1`.\n\nLabel the nodes roughly as:\n\n```text\nA -- CK switch -- B -- Inv1 -- C -- /CK switch -- ... -- A\n \\________________ red inverter ________________/\n```\n\nDuring the phase when the `CK` switch is closed, `A = B`, so both `Inv1` and the red inverter drive node `C` to the same value:\n\n```text\nC = ~A = ~B\n```\n\nSo in that phase the red inverter is just a parallel/assist path.\n\nBut during the other phase, when the `/CK` switch is closed and the output has propagated around the right-hand inverters, node `A` ends up having the same polarity as node `C`. Then the red inverter tries to drive `C` to the opposite value. So it does not “keep” the state; if it were strong, it would actually fight the rest of the circuit and could cause contention or oscillation.\n\nSo the red inverter does not remove the minimum clock-frequency limitation due to leakage. The dynamic storage nodes are still the nodes isolated by the clocked switches, and the red inverter does not statically hold those nodes.\n\nIts actual role, if intentionally present, is a feed-forward/speed-up or assist path: it precomputes/drives the next value of the intermediate node from the feedback node, reducing delay through the clocked pass device and `Inv1`. It is not a static keeper. A true keeper would be weak and connected in the reverse direction around the storage node.",
        "format": "markdown",
        "sha256": "e43ecf9724eae6c322e8443060028d2f964375a432bb264f65d723dbd8b29961"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter as a feedforward bypass that can speed the path and fight the latch. However, it omits the key low-frequency consequence: the unclocked branch can overpower the dynamic latch and raise the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 15456,
        "total_tokens": 16660,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 15456,
        "total_tokens": 16660,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No — I would not agree with that answer.\n\nA **keeper** for `Inv1` would have to be a weak feedback inverter connected roughly like:\n\n```text\nInv1 output  → weak inverter → Inv1 input\n```\n\nso that, when the clocked switch is open and the input node of `Inv1` is floating, the stored value is maintained. That would form a real cross-coupled inverter latch.\n\nThe red inverter in the shown circuit does **not** do that. Its input is on the left-side feedback node and its output is tied to the output of `Inv1`, so when the left clocked switch is closed it is simply in parallel with `Inv1`, not cross-coupled with it.\n\nIn fact, if that red inverter is a normal always-on signal-path inverter, then during the phase where the `\\overline{CK}` switch is closed it completes an odd-inverter feedback loop through the two right-hand inverters:\n\n```text\nred inverter + right two inverters = 3 inversions around the loop\n```\n\nThat would tend to race/oscillate, not statically hold data. So it is not a valid leakage keeper and it does not by itself remove the dynamic minimum-clock-frequency problem.\n\nThe actual role of a top inverter in this kind of drawing is usually simply to generate the complementary clock:\n\n```text\nCK → inverter → CKbar\n```\n\nfor driving the two complementary switches. It is part of the clock/control generation, not a storage keeper in the data path. If the drawing is meant to show it electrically connected to the data nodes as a full-strength inverter, then the circuit is problematic; it is not a proper staticized latch.",
        "format": "markdown",
        "sha256": "c259cff960b640e54ccd00d2c4eb84cd887b29a04d001719deae5d97e92fffa9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly rejects the keeper interpretation and recognizes the possible three-inversion loop, but misses the red inverter’s actual feedforward role and the high-speed/low-frequency tradeoff. Calling it a clock-generation inverter and implying the data-path connection makes the circuit problematic are incorrect.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 18485,
        "total_tokens": 19689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 18485,
        "total_tokens": 19689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No — not as drawn.\n\nLabel the nodes:\n\n- \\(A\\): the feedback/output node at the left of the \\(CK\\) switch.\n- \\(B\\): input of `Inv1`, after the \\(CK\\) switch.\n- \\(C\\): output of `Inv1`, before the \\(\\overline{CK}\\) switch.\n\nA real keeper/latch around `Inv1` would be:\n\n\\[\nB \\xrightarrow{\\text{Inv1}} C,\\qquad C \\xrightarrow{\\text{weak inverter}} B\n\\]\n\ni.e. the feedback inverter would go from `Inv1` output back to `Inv1` input. That would make two cross-coupled inverters and could hold the dynamic node \\(B\\).\n\nBut the red inverter is connected as:\n\n\\[\nA \\xrightarrow{\\text{red inverter}} C\n\\]\n\nSo when the \\(CK\\) switch is closed, \\(A=B\\), and the red inverter is simply in parallel with `Inv1`: both have the same input and same output. That is not a cross-coupled latch.\n\nWhen the \\(\\overline{CK}\\) switch is closed, the right-hand two inverters make \\(A\\) a non-inverted copy of \\(C\\). The red inverter then tries to force\n\n\\[\nC = \\overline{A}\n\\]\n\nwhile the right-hand path gives approximately\n\n\\[\nA = C\n\\]\n\nSo the red inverter creates a race/odd-inverter feedback path, or contention with `Inv1` if `Inv1` is still holding the old sampled value. It does not behave like a keeper.\n\nIts actual role, if intentionally used in such a divider, is a feed-forward/feedback speed-up path: it can precondition node \\(C\\) from the feedback node \\(A\\), reducing the time needed for the next state to be produced. But it does not remove the dynamic-storage minimum-frequency issue. In fact, if left active during a long transparent phase, it can cause race-around/oscillation or invalid contention.\n\nSo the quoted answer is wrong: the red inverter is not a keeper with `Inv1`, and it does not by itself make the circuit fully static.",
        "format": "markdown",
        "sha256": "0b16ce3c1b324a089713200576a3a5489a804d0daec9d768b2a5f5afdac566c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly rejects the keeper interpretation, identifies the A-to-C feedforward speed-up path, and explains its odd-inverter race or contention during long phases. The low-frequency failure is captured, even though the answer does not explicitly say that it raises the minimum usable clock rate.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 20148,
        "total_tokens": 21352,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 20148,
        "total_tokens": 21352,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this resistive-feedback CMOS inverter LNA, do the NF optimization as a **constrained optimization**: every time you change device bias/sizing for lower noise, retune \\(R_F\\) so that \\(R_\\text{in}=50~\\Omega\\).\n\n### 1. Input-match condition\n\nAt midband, assuming \\(C_1\\) is an AC short and defining\n\n\\[\ng_m=g_{m1}+g_{m2}\n\\]\n\nand the inverting voltage gain\n\n\\[\nA_v=\\frac{v_o}{v_i}<0,\n\\]\n\nthe feedback resistor transforms the output gain into an input resistance approximately\n\n\\[\nR_\\text{in}\\approx \\frac{R_F}{1-A_v}\n           = \\frac{R_F}{1+|A_v|}.\n\\]\n\nTherefore, for a 50-\\(\\Omega\\) input,\n\n\\[\n\\boxed{R_F \\approx 50(1+|A_v|)}\n\\]\n\nor, if \\(A_v\\approx -g_m R_o\\),\n\n\\[\n\\boxed{R_F \\approx 50(1+g_m R_o)}.\n\\]\n\nSo \\(R_F\\) is not chosen freely; it must be adjusted after choosing the transistor sizes/bias.\n\n---\n\n### 2. First-order NF dependence\n\nThe MOS channel-noise contribution referred to the input is approximately\n\n\\[\n\\overline{v_{n,\\text{MOS}}^2}\n=\n4kT\n\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}\n{(g_{m1}+g_{m2})^2}.\n\\]\n\nThus the MOS contribution to noise factor is roughly\n\n\\[\nF_\\text{MOS}\n\\approx\n\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}\n{(g_{m1}+g_{m2})^2 R_S},\n\\qquad R_S=50~\\Omega.\n\\]\n\nThe feedback resistor also contributes noise; its contribution decreases when \\(R_F\\) is made larger, i.e. when the loop gain \\(|A_v|\\) is larger.\n\nA useful approximate expression is therefore\n\n\\[\nF \\approx 1\n+\n\\underbrace{\\frac{1}{1+|A_v|}}_{\\text{feedback resistor noise}}\n+\n\\underbrace{\n\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}\n{(g_{m1}+g_{m2})^2 R_S}\n}_{\\text{MOS channel noise}}\n+\\cdots\n\\]\n\nwhere the omitted terms include load noise, gate resistance, induced gate noise, losses in \\(C_1\\), etc.\n\n---\n\n### 3. Design implication\n\nTo reduce NF while keeping \\(R_\\text{in}=50~\\Omega\\):\n\n1. **Increase total transconductance**\n   \\[\n   g_m=g_{m1}+g_{m2}\n   \\]\n   because this lowers the MOS input-referred noise.\n\n2. **Increase voltage gain \\(|A_v|\\)** so that a larger \\(R_F\\) can be used while still satisfying\n   \\[\n   R_F=50(1+|A_v|).\n   \\]\n   A larger \\(R_F\\) contributes less thermal noise.\n\n3. **After every change in bias or sizing, retune \\(R_F\\)** to maintain\n   \\[\n   R_\\text{in}=50~\\Omega.\n   \\]\n\n4. **Choose the NMOS/PMOS sizing to maximize \\(g_m\\) for the allowed current.**  \n   Since the inverter reuses current, both \\(g_{m1}\\) and \\(g_{m2}\\) add to signal gain while their noises add incoherently. Usually \\(W_p\\) is made larger than \\(W_n\\) so that \\(g_{mp}\\) is comparable to \\(g_{mn}\\).\n\n---\n\n### Key point\n\nThere is no unique NF optimum from the schematic alone. In the ideal first-order model, NF keeps improving as \\(g_m\\), gain, and \\(R_F\\) increase. In practice the optimum is set by constraints such as power, bandwidth, input capacitance, stability, linearity, and device noise parameters. So the practical method is:\n\n\\[\n\\boxed{\\text{sweep device sizes/bias } \\rightarrow \\text{ retune } R_F \\text{ for } 50~\\Omega \\rightarrow \\text{ choose minimum NF.}}\n\\]",
        "format": "markdown",
        "sha256": "c55a351caecac80368cc8f645fc8a6368aeaab2e19c5463414687b8656678f02"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly recommends increasing gm while retuning RF to preserve the 50-Ω match, with channel-noise contribution falling roughly as 1/gm and the feedback-resistor noise contribution decreasing. This captures how NF can fall below 1+γ; the matching relation is approximate, but the central mechanism and design trend are right.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 16489,
        "total_tokens": 18956,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 16489,
        "total_tokens": 18956,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this resistive-feedback CMOS inverter LNA, you should **not optimize \\(R_F\\) and \\(g_m\\) independently**, because the 50-Ω input match constrains them.\n\nLet\n\n\\[\nG_m=g_{m1}+g_{m2}\n\\]\n\nand let\n\n\\[\nR_o \\approx r_{o1}\\parallel r_{o2}\\parallel R_L\n\\]\n\nbe the small-signal output resistance seen at the drain node. Ignoring capacitances, the input resistance is approximately\n\n\\[\nR_{in}\\approx \\frac{R_F+R_o}{1+G_m R_o}\n\\]\n\nor, for large voltage gain,\n\n\\[\nR_{in}\\approx \\frac{R_F}{1+A_v},\\qquad A_v\\approx G_mR_o .\n\\]\n\nSince you require\n\n\\[\nR_{in}=R_S=50~\\Omega,\n\\]\n\nthe feedback resistor must be chosen as\n\n\\[\n\\boxed{R_F=50\\left(1+G_mR_o\\right)-R_o}\n\\]\n\nor approximately\n\n\\[\n\\boxed{R_F\\approx 50\\left(1+A_v\\right)}\n\\]\n\nif \\(R_F\\gg R_o\\).\n\n---\n\n### Noise figure optimization\n\nThe dominant NF contributors are:\n\n1. Thermal noise of \\(R_F\\)\n2. Channel noise of \\(M_1\\) and \\(M_2\\)\n\nA useful approximate expression is\n\n\\[\nF \\approx 1+\\frac{50}{R_F}\n+\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}\n{(g_{m1}+g_{m2})^2\\,50}\n\\]\n\nIf \\(\\gamma_n\\approx \\gamma_p=\\gamma\\), this becomes\n\n\\[\nF\\approx 1+\\frac{50}{R_F}\n+\\frac{\\gamma}{50G_m}\n\\]\n\nSo to reduce NF:\n\n- Make \\(R_F\\) as large as possible to reduce its thermal-noise contribution.\n- Increase \\(G_m=g_{m1}+g_{m2}\\) to reduce MOS channel-noise contribution.\n- But whenever \\(G_m\\) is increased, \\(R_F\\) must also be increased according to the 50-Ω matching condition.\n\nThus the practical optimization rule is:\n\n\\[\n\\boxed{\\text{Increase } G_m \\text{ and choose } R_F \\text{ from the } R_{in}=50~\\Omega \\text{ constraint.}}\n\\]\n\nIn practice, \\(G_m\\) is increased by using larger devices and/or more bias current. The limit is set by power consumption, parasitic capacitance, bandwidth, stability, and linearity.\n\n---\n\n### Practical design procedure\n\n1. Choose a bias current and transistor sizes, giving \\(g_{m1}\\) and \\(g_{m2}\\).\n2. Compute\n\n\\[\nG_m=g_{m1}+g_{m2}.\n\\]\n\n3. Estimate \\(R_o=r_{o1}\\parallel r_{o2}\\parallel R_L\\).\n4. Set\n\n\\[\nR_F=50\\left(1+G_mR_o\\right)-R_o.\n\\]\n\n5. Simulate \\(S_{11}\\) and NF.\n6. Increase \\(G_m\\) if NF is too high, then readjust \\(R_F\\) to keep \\(R_{in}=50~\\Omega\\).\n\nSo the key point is: **use \\(R_F\\) to maintain the 50-Ω input match, and use \\(G_m\\) mainly to improve the noise figure.**",
        "format": "markdown",
        "sha256": "6cbb5cb361a2303e2fd6edea17b36fab27a5bea60dd8bcbb3e62710fe1e8fc48"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Uses the finite-output-resistance input-match relation and recommends increasing gm while readjusting RF to preserve 50 Ω. Its noise expression and reasoning correctly imply that gm can exceed 1/Rs and NF can fall below 1 + gamma.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2467,
        "output_tokens": 9525,
        "total_tokens": 11992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8764,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2467,
        "output_tokens": 9525,
        "total_tokens": 11992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8764,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(C_1\\) is an RF short, this is a resistive-shunt-feedback inverter LNA. The key point is that \\(R_F\\) is used to transform the input resistance to 50 Ω, so \\(R_F\\) and gain must be optimized together.\n\nLet\n\n\\[\nG_m=g_{m1}+g_{m2}\n\\]\n\nbecause the NMOS and PMOS transconductances add, and let \\(R_s=50~\\Omega\\).\n\n### 1. Input-match constraint\n\nWith gate current neglected,\n\n\\[\ni_{in}=\\frac{v_{in}-v_o}{R_F}\n\\]\n\nso\n\n\\[\nR_{in}=\\frac{R_F}{1-A_v}\n\\]\n\nwhere \\(A_v=v_o/v_{in}<0\\). Therefore,\n\n\\[\nR_{in}\\approx \\frac{R_F}{1+|A_v|}\n\\]\n\nand for \\(R_{in}=50~\\Omega\\),\n\n\\[\nR_F \\approx 50(1+|A_v|)\n\\]\n\nThus, if you increase \\(R_F\\) to reduce its thermal noise, you must also increase the amplifier gain to keep \\(R_{in}=50~\\Omega\\).\n\n---\n\n### 2. Approximate noise factor\n\nA useful first-order expression is\n\n\\[\nF \\approx 1+\\frac{R_s}{R_F}\n+\n\\frac{\\gamma_{\\text{eff}}}{G_mR_s}\n\\left(1+\\frac{R_s}{R_F}\\right)^2\n\\]\n\nwhere\n\n\\[\n\\gamma_{\\text{eff}}\n=\n\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}{g_{m1}+g_{m2}}\n\\]\n\nand \\(NF=10\\log_{10}F\\).\n\nThis shows two important things:\n\n- The feedback resistor noise contribution is roughly\n\n\\[\n\\frac{R_s}{R_F}\n\\]\n\nso larger \\(R_F\\) improves NF.\n\n- The MOS channel noise contribution is roughly\n\n\\[\n\\frac{\\gamma_{\\text{eff}}}{G_mR_s}\n\\]\n\nso larger total transconductance \\(G_m=g_{m1}+g_{m2}\\) improves NF.\n\n---\n\n### 3. Optimization strategy\n\nTo minimize NF while keeping \\(R_{in}=50~\\Omega\\):\n\n1. Increase \\(G_m=g_{m1}+g_{m2}\\) by using larger devices and/or more bias current.  \n2. This increases \\(|A_v|\\), so increase \\(R_F\\) accordingly to maintain\n\n\\[\nR_{in}=50~\\Omega\n\\]\n\n3. Choose the PMOS/NMOS sizing so both devices contribute useful \\(g_m\\). Usually the PMOS must be wider because \\(\\mu_p<\\mu_n\\).  \n4. Sweep bias current/device size in simulation, and for each point retune \\(R_F\\) for \\(S_{11}\\) or \\(R_{in}=50~\\Omega\\). Select the point with minimum NF.\n\nIn the ideal low-frequency model, NF improves monotonically as \\(G_m\\) and \\(R_F\\) are increased together. Therefore, there is no finite mathematical optimum unless you include practical constraints such as power, bandwidth, input capacitance, stability, linearity, and device parasitic noise.\n\nSo the short answer is:\n\n\\[\n\\boxed{\\text{Use the largest practical } G_m \\text{ and gain, then choose } R_F \\text{ so that } R_{in}=50~\\Omega.}\n\\]\n\nIf the resulting NF is still too high, you need another matching/noise technique, e.g. inductive degeneration, transformer matching, or noise cancellation, because resistive feedback inherently adds thermal noise.",
        "format": "markdown",
        "sha256": "2bc964393274477c0e9e6194a8b0973ef40746bc692524f6c85c61e4d0938443"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer gives the correct design direction: increase total gm and retune RF to preserve the 50 Ω match, reducing NF. It omits the key finite-output-resistance relation and does not explain explicitly how that permits gm above 1/Rs, so the central mechanism is incomplete.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2467,
        "output_tokens": 14782,
        "total_tokens": 17249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2467,
        "output_tokens": 14782,
        "total_tokens": 17249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let the small-signal input voltage at node \\(P\\) be \\(v_p\\), and let the small-signal output voltage be\n\n\\[\nv_{out}=A_v(s)v_p\n\\]\n\nwhere \\(A_v(s)\\) is the signed voltage gain from node \\(P\\) to \\(V_{out}\\).\n\nSince the MOS gate draws essentially no current, the input current is the sum of the current through \\(C_{in}\\) and the feedback resistor \\(R_F\\):\n\n\\[\ni_{in}=sC_{in}v_p+\\frac{v_p-v_{out}}{R_F}\n\\]\n\nSubstitute \\(v_{out}=A_v(s)v_p\\):\n\n\\[\ni_{in}=v_p\\left[sC_{in}+\\frac{1-A_v(s)}{R_F}\\right]\n\\]\n\nHence the input impedance is\n\n\\[\n\\boxed{\nZ_{in}(s)=\\frac{v_p}{i_{in}}\n=\n\\left[\nsC_{in}+\\frac{1-A_v(s)}{R_F}\n\\right]^{-1}\n}\n\\]\n\nIf the amplifier from \\(P\\) to \\(V_{out}\\) is inverting, write \\(A_v(s)=-A(s)\\), where \\(A(s)>0\\). Then\n\n\\[\n\\boxed{\nZ_{in}(s)=\\frac{R_F}{1+A(s)+sR_FC_{in}}\n}\n\\]\n\nAt low frequency,\n\n\\[\n\\boxed{\nR_{in}\\approx \\frac{R_F}{1+A_0}\n}\n\\]\n\nwhere \\(A_0\\) is the low-frequency magnitude of the voltage gain.\n\nFor the three-stage amplifier, approximately,\n\n\\[\nA_0 \\approx \ng_{m1}R_{1}\\; g_{m2}R_{2}\\; g_{m3}R_{3}\n\\]\n\nwith, for example,\n\n\\[\nR_1\\approx R_{D1}\\parallel r_{o1},\\qquad\nR_2\\approx r_{o2}\\parallel r_{o,ISS},\\qquad\nR_3\\approx R_{D2}\\parallel r_{o3}\n\\]\n\nassuming the stages are common-source/inverting and supplies are ac grounds. Thus the feedback resistor is divided by roughly the loop gain, giving a low input impedance.",
        "format": "markdown",
        "sha256": "733d3f434434c058cc7f7965b67f7f4646a691a84e62b53006ce42e811660cf0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies feedback as reducing the input resistance, but misses the output resistance in the feedback path and gives the wrong low-frequency result. The required expression is \\(R_{in}=(R_F+R_{D2})/(1+A_0)\\), with the two-stage gain specified by the circuit, not the proposed three-stage gain.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 7231,
        "total_tokens": 7441,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 7231,
        "total_tokens": 7441,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let the small-signal input-node voltage be \\(v_p\\), and define the voltage gain from the input node to the output as\n\n\\[\nA_v(s)=\\frac{v_{out}}{v_p}\n\\]\n\nincluding its sign.\n\nSince the MOS gate draws negligible current, the input current flows only into \\(C_{in}\\) and through \\(R_F\\). Thus,\n\n\\[\ni_{in}=sC_{in}v_p+\\frac{v_p-v_{out}}{R_F}\n\\]\n\n\\[\ni_{in}=v_p\\left[sC_{in}+\\frac{1-A_v(s)}{R_F}\\right]\n\\]\n\nSo the input impedance is\n\n\\[\n\\boxed{\nZ_{in}(s)=\\frac{v_p}{i_{in}}\n=\n\\frac{1}{sC_{in}+\\dfrac{1-A_v(s)}{R_F}}\n}\n\\]\n\nor equivalently,\n\n\\[\n\\boxed{\nZ_{in}(s)=\\frac{R_F}{1-A_v(s)+sR_FC_{in}}\n}\n\\]\n\nIf the amplifier is inverting, i.e.\n\n\\[\nA_v(s)=-A(s),\n\\]\n\nthen\n\n\\[\n\\boxed{\nZ_{in}(s)=\\frac{R_F}{1+A(s)+sR_FC_{in}}\n}\n\\]\n\nand at low frequency,\n\n\\[\n\\boxed{\nR_{in}\\approx \\frac{R_F}{1+A_0}\n}\n\\]\n\nwhere \\(A_0\\) is the midband magnitude of the voltage gain from node \\(P\\) to \\(V_{out}\\).",
        "format": "markdown",
        "sha256": "1c152bbacae929414efae930ffa3d4325bd23767e1844e77ae3689d187a15903"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the feedback-current/Miller relation, but the stated low-frequency result omits the output resistance term. For the specified unloaded gain, the exact result is (RF + RD2)/(1 + A0); RF/(1 + A0) does not capture it.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 12775,
        "total_tokens": 12985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12427,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 12775,
        "total_tokens": 12985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12427,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_p\\) be the small-signal voltage at node \\(P\\), and define the signed voltage gain\n\n\\[\nA_v(s)=\\frac{v_{out}}{v_p}.\n\\]\n\nSince the MOS gate draws negligible current, the input current goes only into \\(C_{in}\\) and through \\(R_F\\):\n\n\\[\ni_{in}=sC_{in}v_p+\\frac{v_p-v_{out}}{R_F}.\n\\]\n\nUsing \\(v_{out}=A_v(s)v_p\\),\n\n\\[\ni_{in}=\\left[sC_{in}+\\frac{1-A_v(s)}{R_F}\\right]v_p.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nZ_{in}(s)=\\frac{v_p}{i_{in}}\n=\n\\left[\nsC_{in}+\\frac{1-A_v(s)}{R_F}\n\\right]^{-1}\n}\n\\]\n\nAt low frequency, neglecting \\(C_{in}\\),\n\n\\[\n\\boxed{\nR_{in}\\approx \\frac{R_F}{1-A_v}\n}\n\\]\n\nwhere \\(A_v\\) is the signed gain from node \\(P\\) to \\(V_{out}\\).\n\nFor a usual inverting feedback amplifier, \\(A_v=-|A_v|\\), so\n\n\\[\nR_{in}\\approx \\frac{R_F}{1+|A_v|}.\n\\]\n\nBut for the circuit as drawn, with two common-source inversions followed by a source follower, the overall gain is positive, so\n\n\\[\n\\boxed{\nR_{in}\\approx \\frac{R_F}{1-A_v}\n}\n\\]\n\nwhich can become very large for \\(A_v\\approx 1\\) or even negative if \\(A_v>1\\).",
        "format": "markdown",
        "sha256": "2f7bf28dbf5d37391bf3394f9f70af9da9a7b4b182578b484f621d8a52eff49c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that the feedback resistor contributes to input current, but assumes an ideal output and gives the wrong gain sign and conclusion. It misses the amplifier output resistance; the required result is Rin = (RF + RD2)/(1 + A0), not an impedance that becomes large or negative.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 17988,
        "total_tokens": 18198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 17988,
        "total_tokens": 18198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "You cannot get the VCO phase noise from the LDO noise spectrum \\(S_{\\rm th}\\) alone; you also need the VCO sensitivity to supply noise, i.e. its **supply pushing gain**.\n\nLet the LDO output noise at the VCO supply node be\n\n\\[\nS_{vdd}(\\Delta f)=S_{\\rm th}(\\Delta f) \\quad [\\mathrm{V^2/Hz}]\n\\]\n\nor, if there is filtering/decoupling between the LDO noise source and the VCO,\n\n\\[\nS_{vdd}(\\Delta f)=|H_{\\rm sup}(j2\\pi \\Delta f)|^2 S_{\\rm th}(\\Delta f).\n\\]\n\nDefine the VCO supply pushing coefficient as\n\n\\[\nK_{VDD}=\\frac{\\partial \\omega_0}{\\partial V_{out}}\n\\quad [\\mathrm{rad/s/V}]\n\\]\n\nor equivalently\n\n\\[\nK_{VDD,f}=\\frac{\\partial f_0}{\\partial V_{out}}\n\\quad [\\mathrm{Hz/V}].\n\\]\n\nThe LDO noise causes instantaneous frequency noise:\n\n\\[\nS_{\\Delta \\omega}(\\Delta f)=K_{VDD}^2 S_{vdd}(\\Delta f).\n\\]\n\nSince phase is the integral of frequency,\n\n\\[\nS_{\\phi}(\\Delta f)\n=\n\\frac{K_{VDD}^2 S_{vdd}(\\Delta f)}\n{(2\\pi \\Delta f)^2}\n\\quad [\\mathrm{rad^2/Hz}].\n\\]\n\nThe single-sideband phase noise is approximately\n\n\\[\n\\mathcal L(\\Delta f)\n=\n\\frac{1}{2}S_{\\phi}(\\Delta f).\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\n\\mathcal L_{\\rm LDO}(\\Delta f)\n=\n\\frac{1}{2}\n\\frac{K_{VDD}^2}{(2\\pi \\Delta f)^2}\nS_{vdd}(\\Delta f)\n}\n\\]\n\nin linear units, or in dBc/Hz,\n\n\\[\n\\boxed{\n\\mathcal L_{\\rm LDO}(\\Delta f)\n=\n10\\log_{10}\n\\left[\n\\frac{K_{VDD}^2 |H_{\\rm sup}(j2\\pi \\Delta f)|^2 S_{\\rm th}(\\Delta f)}\n{2(2\\pi \\Delta f)^2}\n\\right].\n}\n\\]\n\nIf \\(K_{VDD,f}\\) is used in Hz/V instead of rad/s/V:\n\n\\[\n\\boxed{\n\\mathcal L_{\\rm LDO}(\\Delta f)\n=\n10\\log_{10}\n\\left[\n\\frac{K_{VDD,f}^2 |H_{\\rm sup}|^2 S_{\\rm th}(\\Delta f)}\n{2\\Delta f^2}\n\\right].\n}\n\\]\n\nSo practically:\n\n1. Simulate or measure \\(S_{vdd}\\) at the VCO supply node.\n2. Simulate or measure the VCO supply pushing \\(K_{VDD}\\).\n3. Use the formula above.\n4. Add this contribution linearly to the intrinsic VCO phase-noise contributions.\n\nFor white LDO thermal noise, this contribution falls as \\(1/\\Delta f^2\\), i.e. \\(-20\\ \\mathrm{dB/dec}\\), because supply-voltage noise is converted to frequency noise and then integrated into phase noise.",
        "format": "markdown",
        "sha256": "dcdb162dc23a4d83b6f9bdef70163e742c1c888babeab9b013c7b21de9bd7f30"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly derives supply-noise-to-frequency-noise and FM-to-phase-noise conversion, including the 1/Δf² dependence. It omits the circuit-specific insight that supply noise directly perturbs the varactors, making Kpush closely related to KVCO and motivating a lower KVCO.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 5400,
        "total_tokens": 8794,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 5400,
        "total_tokens": 8794,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the LDO thermal noise as a supply-voltage noise source that modulates the VCO oscillation frequency.\n\nLet the LDO output noise PSD be\n\n\\[\nS_{th}(f)\\quad [\\mathrm{V^2/Hz}]\n\\]\n\nat the VCO supply node. Define the VCO supply-pushing gain\n\n\\[\nK_{VDD}=\\frac{\\partial f_0}{\\partial V_{DD}}\\quad [\\mathrm{Hz/V}]\n\\]\n\nor equivalently \\(\\partial \\omega_0/\\partial V_{DD}=2\\pi K_{VDD}\\) in \\(\\mathrm{rad/s/V}\\).\n\nA small LDO noise voltage \\(v_n(t)\\) causes instantaneous frequency noise\n\n\\[\n\\Delta f(t)=K_{VDD}v_n(t)\n\\]\n\nand phase is the time integral of frequency:\n\n\\[\n\\phi_n(t)=2\\pi \\int \\Delta f(t)\\,dt .\n\\]\n\nTherefore, at offset frequency \\(f_m\\),\n\n\\[\nS_{\\phi}(f_m)\n=\n\\left(\\frac{K_{VDD}}{f_m}\\right)^2 S_{th}(f_m)\n\\quad [\\mathrm{rad^2/Hz}]\n\\]\n\nif \\(K_{VDD}\\) is in Hz/V.\n\nThe single-sideband phase noise is then\n\n\\[\n\\boxed{\n\\mathcal{L}(f_m)\n=\n\\frac{1}{2}\n\\left(\\frac{K_{VDD}}{f_m}\\right)^2\nS_{th}(f_m)\n}\n\\]\n\nin linear units, or\n\n\\[\n\\boxed{\n\\mathcal{L}_{\\mathrm{dBc/Hz}}(f_m)\n=\n10\\log_{10}\n\\left[\n\\frac{1}{2}\n\\left(\\frac{K_{VDD}}{f_m}\\right)^2\nS_{th}(f_m)\n\\right]\n}\n\\]\n\nIf the supply network or decoupling filters the LDO noise before it reaches the VCO, include that transfer function \\(H_{s}(j2\\pi f_m)\\):\n\n\\[\n\\boxed{\n\\mathcal{L}(f_m)\n=\n\\frac{1}{2}\n\\left|\n\\frac{K_{VDD}H_s(j2\\pi f_m)}{f_m}\n\\right|^2\nS_{th}(f_m)\n}\n\\]\n\nSo the key quantity is the VCO supply pushing \\(K_{VDD}\\). In practice, obtain it by sweeping or perturbing \\(V_{DD}\\) in simulation and measuring the resulting change in oscillation frequency.",
        "format": "markdown",
        "sha256": "59bef79efc60eb74b7f63ae85bb8aaa72dc92edae9ad0477ea1acff4287c1844"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly derives supply-pushing FM-to-PM conversion and the 1/offset-frequency-squared phase-noise expression. It omits the circuit-specific insight that supply perturbations act directly on the varactors, linking Kpush to KVCO and making lower KVCO reduce the conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 4182,
        "total_tokens": 7576,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 4182,
        "total_tokens": 7576,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "You cannot compute the VCO phase noise from \\(S_{\\rm th}\\) alone. You need the **supply-noise-to-phase transfer** of the VCO, usually expressed as the VCO **supply pushing gain**:\n\n\\[\nK_{\\rm VDD}=\\frac{\\partial \\omega_0}{\\partial V_{\\rm out}}\n\\qquad [\\mathrm{rad/s/V}]\n\\]\n\nor equivalently in Hz/V:\n\n\\[\nK_{\\rm VDD,Hz}=\\frac{\\partial f_0}{\\partial V_{\\rm out}}\n\\]\n\nIf the LDO output thermal-noise spectrum at the VCO supply is\n\n\\[\nS_{\\rm th}(f) \\quad [\\mathrm{V^2/Hz}]\n\\]\n\nthen the supply-induced VCO phase-noise spectrum is approximately\n\n\\[\nS_{\\phi}(f_m)\n=\n\\left|\\frac{K_{\\rm VDD}}{2\\pi f_m}\\right|^2 S_{\\rm th}(f_m)\n\\qquad [\\mathrm{rad^2/Hz}]\n\\]\n\nwhere \\(f_m\\) is the offset frequency from the carrier.\n\nThe single-sideband phase noise is then\n\n\\[\n\\mathcal{L}(f_m)\n=\n\\frac{1}{2}S_{\\phi}(f_m)\n\\]\n\nso\n\n\\[\n\\boxed{\n\\mathcal{L}(f_m)\n=\n\\frac{1}{2}\n\\left|\\frac{K_{\\rm VDD}}{2\\pi f_m}\\right|^2\nS_{\\rm th}(f_m)\n}\n\\]\n\nin linear units, or in dBc/Hz:\n\n\\[\n\\boxed{\n\\mathcal{L}_{\\rm dBc/Hz}(f_m)\n=\n10\\log_{10}\n\\left[\n\\frac{1}{2}\n\\left|\\frac{K_{\\rm VDD}}{2\\pi f_m}\\right|^2\nS_{\\rm th}(f_m)\n\\right]\n}\n\\]\n\nIf \\(K_{\\rm VDD}\\) is given in Hz/V instead of rad/s/V, use\n\n\\[\n\\boxed{\n\\mathcal{L}(f_m)\n=\n\\frac{1}{2}\n\\left|\\frac{K_{\\rm VDD,Hz}}{f_m}\\right|^2\nS_{\\rm th}(f_m)\n}\n\\]\n\nMore generally, include the supply network transfer function \\(H_{\\rm sup}(f)\\):\n\n\\[\n\\boxed{\n\\mathcal{L}(f_m)\n=\n\\frac{1}{2}\n\\left|\\frac{K_{\\rm VDD}}{2\\pi f_m}\\right|^2\n|H_{\\rm sup}(f_m)|^2\nS_{\\rm th}(f_m)\n}\n\\]\n\nwhere \\(H_{\\rm sup}\\) accounts for LDO output impedance, decoupling capacitors, bondwire/package inductance, and the VCO supply impedance.\n\nSo the procedure is:\n\n1. Find the LDO output noise spectrum \\(S_{\\rm th}(f)\\).\n2. Find the supply-noise transfer to the VCO supply node, \\(H_{\\rm sup}(f)\\).\n3. Find the VCO supply pushing gain \\(K_{\\rm VDD}\\).\n4. Compute\n\n\\[\nS_{\\phi}(f_m)=\n\\left|\\frac{K_{\\rm VDD}}{2\\pi f_m}\\right|^2\n|H_{\\rm sup}(f_m)|^2\nS_{\\rm th}(f_m)\n\\]\n\n5. Convert to SSB phase noise using\n\n\\[\n\\mathcal{L}(f_m)=\\frac{1}{2}S_{\\phi}(f_m)\n\\]\n\nThis contribution has a \\(1/f_m^2\\) shape if the LDO thermal noise is white.",
        "format": "markdown",
        "sha256": "cc19776cfa10629ff948a857665788f2475e4251780bb27ddc891a64ec522ace"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly uses supply-pushing sensitivity to convert LDO noise to phase noise, with the expected 1/f_m^2 dependence. It omits the circuit-specific insight that supply noise acts directly on the varactors, making Kpush closely related to KVCO, and that reducing KVCO reduces this conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3394,
        "output_tokens": 4430,
        "total_tokens": 7824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 3394,
        "output_tokens": 4430,
        "total_tokens": 7824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) at the tail node usually **reduces phase noise**, up to an optimum value.\n\nWhy:\n\n- The tail node is a common-mode node, so \\(C_T\\) does not significantly load the desired differential tank mode.\n- At RF, \\(C_T\\) provides a low-impedance path to ground, so noise from the tail current source is partially shunted instead of being commutated into the LC tanks.\n- \\(C_T\\) allows an AC tail current component, making the switching-pair current more “peaked” near the tank-voltage maxima, where phase sensitivity is low. Less noise is injected near the zero crossings, where phase sensitivity is high.\n\nSo the phase-noise curve typically moves downward, especially for the active-device/tail-noise contribution.\n\nHowever, it is not unlimited:\n\n- Very low-frequency tail-current noise is not removed by \\(C_T\\).\n- If \\(C_T\\) is too large or lossy, or if it reduces headroom/swing or causes excessive current spikes, phase noise can stop improving or even degrade.\n- Tank thermal-noise-limited phase noise is mostly unchanged.\n\nSo: **small-to-moderate \\(C_T\\) usually improves phase noise; there is an optimum \\(C_T\\).**",
        "format": "markdown",
        "sha256": "4be9e28d1c1e187f6177503f274b9c28fde91f81f018479a3e57f7ebb9225808"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gives a nonmonotonic optimum and describes a class-C-like current-peaking improvement, but does not identify peak tank current exceeding ISS or any of Razavi’s specific degradation mechanisms (flicker-noise upconversion, triode operation, or low-frequency instability). It also leans on generic tail-noise shunting.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 12029,
        "total_tokens": 15596,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11757,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 12029,
        "total_tokens": 15596,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11757,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) at the tail node usually **reduces the phase-noise contribution of the tail current source**, but the effect is **not monotonically “the bigger the better.”**\n\n- \\(C_T\\) makes the tail node a lower impedance at RF, especially around \\(f_0\\) and often \\(2f_0\\).\n- Noise from the tail current source at those frequencies is then shunted by \\(C_T\\) instead of being commutated by \\(M_1/M_2\\) into the LC tank.\n- It can also shape the tail current waveform so less noise is injected at the phases where the oscillator is most sensitive to phase perturbations.\n\nSo, for a practical LC VCO, adding a suitable \\(C_T\\) often **improves phase noise**, particularly the white-noise \\(1/\\Delta f^2\\) region.\n\nHowever:\n\n- The tank noise is unchanged.\n- Low-frequency/flicker noise of the tail source is not strongly filtered by a simple capacitor.\n- If \\(C_T\\) is too large, it can clamp the tail node, alter the conduction angle, reduce swing/headroom, or increase AM-to-PM conversion, so phase noise can stop improving or even degrade.\n\nSo the correct summary is:\n\n\\[\n\\boxed{\\text{Phase noise generally improves for an optimum } C_T,\\text{ but excessive } C_T \\text{ can worsen it.}}\n\\]",
        "format": "markdown",
        "sha256": "44cc9709beccfa6d19549bef5bc4dea2923ce62201b4b0842e928fff7310032c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes a nonmonotonic effect and an optimum, but gives only generic filtering and excessive-capacitance arguments. It misses the key class-C improvement mechanism and Razavi’s specific degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 3567,
        "output_tokens": 12735,
        "total_tokens": 16302,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 3567,
        "output_tokens": 12735,
        "total_tokens": 16302,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) at the tail node usually **reduces the tail-current-source contribution to phase noise**, but the total phase noise is **not guaranteed to improve monotonically**.\n\n- \\(C_T\\) makes the tail node a lower impedance at RF/harmonic frequencies:\n\n\\[\nZ_P(\\omega) \\approx \\frac{1}{g_{ss}+j\\omega C_T}\n\\]\n\nso noise from \\(I_{SS}\\) produces less voltage ripple at node \\(P\\), and less of that common-mode noise is mixed into differential phase noise.\n\n- It can also shape the tail-node waveform, often reducing noise injection at the most phase-sensitive instants of the oscillation cycle.\n\nSo for a properly chosen \\(C_T\\), phase noise often **improves**, especially the component due to the tail source and common-mode/tail noise folding.\n\nHowever:\n\n- An ideal capacitor adds no noise, but it changes the large-signal waveform.\n- Too large a \\(C_T\\) can reduce headroom/swing, disturb the conduction angle, create an unwanted common-mode resonance, or increase flicker/AM-to-PM conversion.\n- Tank thermal-noise-limited phase noise is mostly unchanged.\n\nSo the practical answer is: **phase noise typically goes down at first, reaches an optimum, and may worsen if \\(C_T\\) is made too large or poorly tuned.**",
        "format": "markdown",
        "sha256": "270a07515e3aef2fe2cd467c646880f1ed92d68eb78a614fb2bc3aa0987f38a3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly describes a potentially nonmonotonic effect, but gives only generic filtering-versus-excessive-capacitance reasoning. It misses the class-C peak-current improvement and the specific Razavi degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 3567,
        "output_tokens": 10132,
        "total_tokens": 13699,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 3567,
        "output_tokens": 10132,
        "total_tokens": 13699,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For this quadrature LC oscillator, the oscillation frequency is close to the LC-tank resonance:\n\n\\[\nf_0=\\frac{1}{2\\pi\\sqrt{LC_T}}\n\\]\n\nwhere \\(C_T\\) is the total capacitance at each tank node, including MOS parasitics.\n\nBecause the two oscillators are coupled by the \\(I_1\\) differential pairs, the tank must provide some extra phase shift, so the oscillation frequency is shifted slightly from \\(f_0\\). If the tank quality factor is \\(Q\\), an estimate is\n\n\\[\n\\omega_{\\text{osc}} \\approx \\omega_0\\left(1-\\frac{I_1}{2QI_{SS}}\\right)\n\\]\n\nfor the usual lower-frequency quadrature mode, where\n\n\\[\n\\omega_0=\\frac{1}{\\sqrt{LC_T}}.\n\\]\n\nEquivalently,\n\n\\[\nf_{\\text{osc}} \\approx f_0\\left(1-\\frac{I_1}{2QI_{SS}}\\right).\n\\]\n\nIf the opposite quadrature sequence is selected, the sign of the shift reverses:\n\n\\[\nf_{\\text{osc}} \\approx f_0\\left(1+\\frac{I_1}{2QI_{SS}}\\right).\n\\]\n\nSo, to first order, the circuit oscillates approximately at the LC resonance, with a small coupling-dependent shift proportional to \\(I_1/I_{SS}\\).",
        "format": "markdown",
        "sha256": "60719bce12a9bbbcf624caa491b2db23d0fc232f98fbb8f53cc25e0040bb8b73"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Starts from the LC-tank resonance and gives the coupling-induced shift with magnitude (I1/ISS)ω0/(2Q), including both possible signs for the quadrature modes. This matches the essential estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 10668,
        "total_tokens": 12469,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10357,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 10668,
        "total_tokens": 12469,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10357,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "From the schematic alone you cannot get a numerical frequency; it is set mainly by the LC tank capacitance and inductance.\n\nLet \\(C_T\\) be the effective capacitance at each tank node \\(X_1,Y_1,X_2,Y_2\\), including MOS parasitics, wiring, load, varactors, etc. Then the uncoupled tank resonance is\n\n\\[\n\\omega_0 \\approx \\frac{1}{\\sqrt{L C_T}},\n\\qquad\nf_0 \\approx \\frac{1}{2\\pi\\sqrt{L C_T}} .\n\\]\n\nFor this quadrature-coupled LC oscillator, the coupling pair with tail current \\(I_1\\) pulls the frequency slightly above or below the tank resonance. With tank quality factor \\(Q\\),\n\n\\[\nQ\\left(\\frac{\\omega_{\\rm osc}}{\\omega_0}\n-\\frac{\\omega_0}{\\omega_{\\rm osc}}\\right)\n\\approx \\pm \\frac{I_1}{I_{SS}} .\n\\]\n\nThus\n\n\\[\n\\omega_{\\rm osc}\n\\approx\n\\omega_0\\left[\n\\sqrt{1+\\left(\\frac{I_1}{2QI_{SS}}\\right)^2}\n\\;\\pm\\;\n\\frac{I_1}{2QI_{SS}}\n\\right].\n\\]\n\nFor weak coupling/high \\(Q\\),\n\n\\[\n\\boxed{\nf_{\\rm osc} \\approx f_0\n\\left(1 \\pm \\frac{I_1}{2QI_{SS}}\\right)\n}\n\\]\n\nand often the rough estimate is simply\n\n\\[\n\\boxed{f_{\\rm osc} \\approx \\frac{1}{2\\pi\\sqrt{L C_T}} } .\n\\]\n\nThe sign depends on the quadrature phase sequence/coupling polarity.",
        "format": "markdown",
        "sha256": "60851f114ef804ddf18ec3582136347cb64baf19dbf00ad43d53dd9da8ad0e28"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Includes the tank resonance and the correct coupling-induced shift, with the large-signal estimate proportional to I1/ISS and 1/(2Q). The weak-coupling expression and either-side-of-resonance interpretation match the golden solution.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1801,
        "output_tokens": 19552,
        "total_tokens": 21353,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1801,
        "output_tokens": 19552,
        "total_tokens": 21353,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "openai/gpt-5.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a coupled LC quadrature oscillator. Its oscillation frequency is mainly set by the LC tank resonance, but the quadrature-coupling current \\(I_1\\) shifts it slightly away from the natural tank frequency.\n\nLet\n\n\\[\n\\omega_0=\\frac{1}{\\sqrt{LC_T}}, \\qquad \nf_0=\\frac{1}{2\\pi\\sqrt{LC_T}}\n\\]\n\nwhere \\(C_T\\) is the total tank capacitance at each LC node, including MOS parasitics, varactors/load capacitance, etc.\n\nFor a tank quality factor \\(Q\\), and assuming the coupling pair current is \\(I_1\\) while the main oscillator tail current is \\(I_{SS}\\), the oscillation frequency is approximately\n\n\\[\n\\boxed{\n\\frac{\\omega_{\\text{osc}}}{\\omega_0}\n\\approx\n\\sqrt{1+\\left(\\frac{I_1}{2QI_{SS}}\\right)^2}\n\\;\\pm\\;\n\\frac{I_1}{2QI_{SS}}\n}\n\\]\n\nor, for weak coupling,\n\n\\[\n\\boxed{\nf_{\\text{osc}} \\approx f_0\n\\left(1 \\pm \\frac{I_1}{2QI_{SS}}\\right)\n}\n\\]\n\nThe sign depends on the coupling polarity/phase sequence. If the coupling is weak or the tank \\(Q\\) is high, the shift is small, so a practical estimate is simply\n\n\\[\n\\boxed{\nf_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{LC_T}}\n}\n\\]",
        "format": "markdown",
        "sha256": "035929d2aa055688ee281972063dd0cc4d87492661c27c43736bd12c0e9fa870"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the tank resonance and, in the weak-coupling limit, the correct shift \u00177 I1/(2QISS) relative to the tank frequency. The sign and small-shift interpretation are also consistent with the golden solution.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1801,
        "output_tokens": 6043,
        "total_tokens": 7844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1801,
        "output_tokens": 6043,
        "total_tokens": 7844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    }
  ]
}
