{
  "model_key": "gpt_56_luna",
  "display_name": "GPT-5.6 Luna",
  "provider": "openai",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "GPT-5.6 Luna answered the 50 tasks in three rollouts through OpenRouter's chat completions route (openai/gpt-5.6-luna) at maximum reasoning effort. Requests set max_tokens to 128,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for GPT-5.6 Luna on 2026-11-10 ($0.20 input, $0.02 cached input, $1.20 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 95,
          "incorrect_count": 55,
          "partial_credit_count": 44,
          "zero_count": 11,
          "mean_score_0_to_4": 3.08,
          "score_percent": 77.0,
          "score_distribution": {
            "0": 11,
            "1": 19,
            "2": 12,
            "3": 13,
            "4": 95
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 95,
          "incorrect_count": 55,
          "partial_credit_count": 44,
          "zero_count": 11,
          "mean_score_0_to_4": 3.08,
          "score_percent": 77.0,
          "score_distribution": {
            "0": 11,
            "1": 19,
            "2": 12,
            "3": 13,
            "4": 95
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 73,
          "incorrect_count": 17,
          "partial_credit_count": 7,
          "zero_count": 10,
          "mean_score_0_to_4": 3.411111111111111,
          "score_percent": 85.27777777777777,
          "score_distribution": {
            "0": 10,
            "1": 3,
            "3": 4,
            "4": 73
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 73,
          "incorrect_count": 17,
          "partial_credit_count": 7,
          "zero_count": 10,
          "mean_score_0_to_4": 3.411111111111111,
          "score_percent": 85.27777777777777,
          "score_distribution": {
            "0": 10,
            "1": 3,
            "3": 4,
            "4": 73
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 22,
          "incorrect_count": 38,
          "partial_credit_count": 37,
          "zero_count": 1,
          "mean_score_0_to_4": 2.5833333333333335,
          "score_percent": 64.58333333333334,
          "score_distribution": {
            "0": 1,
            "1": 16,
            "2": 12,
            "3": 9,
            "4": 22
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 22,
          "incorrect_count": 38,
          "partial_credit_count": 37,
          "zero_count": 1,
          "mean_score_0_to_4": 2.5833333333333335,
          "score_percent": 64.58333333333334,
          "score_distribution": {
            "0": 1,
            "1": 16,
            "2": 12,
            "3": 9,
            "4": 22
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 32,
        "incorrect_count": 18,
        "partial_credit_count": 15,
        "zero_count": 3,
        "mean_score_0_to_4": 3.14,
        "score_percent": 78.5,
        "score_distribution": {
          "0": 3,
          "1": 6,
          "2": 4,
          "3": 5,
          "4": 32
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 31,
        "incorrect_count": 19,
        "partial_credit_count": 14,
        "zero_count": 5,
        "mean_score_0_to_4": 3.0,
        "score_percent": 75.0,
        "score_distribution": {
          "0": 5,
          "1": 6,
          "2": 4,
          "3": 4,
          "4": 31
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 32,
        "incorrect_count": 18,
        "partial_credit_count": 15,
        "zero_count": 3,
        "mean_score_0_to_4": 3.1,
        "score_percent": 77.5,
        "score_distribution": {
          "0": 3,
          "1": 7,
          "2": 4,
          "3": 4,
          "4": 32
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 191380,
        "input_tokens": 272871,
        "output_tokens": 2784497,
        "total_tokens": 3057368
      },
      "known_totals": {
        "cached_input_tokens": 191380,
        "input_tokens": 272871,
        "output_tokens": 2784497,
        "total_tokens": 3057368
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 25,
          "incorrect_count": 5,
          "partial_credit_count": 2,
          "zero_count": 3,
          "mean_score_0_to_4": 3.466666666666667,
          "score_percent": 86.66666666666667,
          "score_distribution": {
            "0": 3,
            "1": 1,
            "3": 1,
            "4": 25
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 23,
          "incorrect_count": 7,
          "partial_credit_count": 3,
          "zero_count": 4,
          "mean_score_0_to_4": 3.3,
          "score_percent": 82.5,
          "score_distribution": {
            "0": 4,
            "1": 1,
            "3": 2,
            "4": 23
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 25,
          "incorrect_count": 5,
          "partial_credit_count": 2,
          "zero_count": 3,
          "mean_score_0_to_4": 3.466666666666667,
          "score_percent": 86.66666666666667,
          "score_distribution": {
            "0": 3,
            "1": 1,
            "3": 1,
            "4": 25
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 7,
          "incorrect_count": 13,
          "partial_credit_count": 13,
          "zero_count": 0,
          "mean_score_0_to_4": 2.65,
          "score_percent": 66.25,
          "score_distribution": {
            "1": 5,
            "2": 4,
            "3": 4,
            "4": 7
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 8,
          "incorrect_count": 12,
          "partial_credit_count": 11,
          "zero_count": 1,
          "mean_score_0_to_4": 2.55,
          "score_percent": 63.74999999999999,
          "score_distribution": {
            "0": 1,
            "1": 5,
            "2": 4,
            "3": 2,
            "4": 8
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 7,
          "incorrect_count": 13,
          "partial_credit_count": 13,
          "zero_count": 0,
          "mean_score_0_to_4": 2.55,
          "score_percent": 63.74999999999999,
          "score_distribution": {
            "1": 6,
            "2": 4,
            "3": 3,
            "4": 7
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the same process and bias point,\n\n\\[\nA_{v,\\text{int}}=g_m r_o.\n\\]\n\n- Doubling \\(W\\) and \\(L\\) leaves \\(W/L\\) unchanged, so \\(g_m\\) is approximately unchanged.\n- Doubling \\(L\\) roughly halves the channel-length-modulation parameter \\(\\lambda\\), so\n  \\[\n  r_o=\\frac{1}{\\lambda I_D}\n  \\]\n  approximately doubles.\n\nTherefore, the MOSFET’s intrinsic gain \\(g_mr_o\\) approximately **doubles**. This assumes normal long-channel behavior; short-channel effects can make the scaling less exact.",
        "format": "markdown",
        "sha256": "64df62ee1523975c1930935762fde53689d53aa36c6901ad19e74d899e151385"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions leaves W/L and approximately gm unchanged, while the longer channel reduces λ and approximately doubles ro and intrinsic gain. The stated short-channel caveat is appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2720,
        "total_tokens": 2746,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2573,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2720,
        "total_tokens": 2746,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2573,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic voltage gain is\n\n\\[\nA_{v,\\text{int}}=g_m r_o.\n\\]\n\nIf both dimensions are doubled,\n\n\\[\nW' = 2W,\\qquad L'=2L,\n\\]\n\nthen \\(W/L\\) remains unchanged. Thus, for the same bias overdrive:\n\n- \\(g_m\\) is approximately unchanged.\n- The longer channel reduces channel-length modulation, so \\(r_o\\) approximately doubles since \\(\\lambda \\propto 1/L\\).\n\nTherefore,\n\n\\[\nA_{v,\\text{int}}=g_m r_o\n\\]\n\napproximately **doubles**.\n\nThis assumes the same bias conditions and a long-channel model. In practice, short-channel effects make the improvement less exact.",
        "format": "markdown",
        "sha256": "62bd2ae89b66bc81476a193447be237dffd22aa88195c17a214f262eb8626965"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions leaves W/L and gm approximately unchanged, while the longer channel increases ro, so intrinsic gain approximately doubles under the stated bias assumptions.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2231,
        "total_tokens": 2257,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2231,
        "total_tokens": 2257,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain is\n\n\\[\nA_{v0}=g_m r_o.\n\\]\n\nAssuming the same process and bias conditions:\n\n- Doubling \\(W\\) and \\(L\\) keeps \\(W/L\\) unchanged, so \\(g_m\\) is approximately unchanged.\n- Channel-length modulation decreases as \\(L\\) increases, so \\(r_o\\) approximately doubles.\n\nTherefore,\n\n\\[\n\\boxed{A_{v0}\\text{ approximately doubles}}\n\\]\n\nin the long-channel approximation. The exact result may differ for short-channel devices or if the bias current is changed.",
        "format": "markdown",
        "sha256": "5d4d3f4f4860bb2ccd0a11cf24736b0679867bf8ff307c6b7f14bda0c60cfcd3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling both dimensions leaves W/L and gm approximately unchanged, while increased channel length approximately doubles ro and intrinsic gain.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1161,
        "total_tokens": 1187,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1161,
        "total_tokens": 1187,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both can be correct, depending on what is held constant.**\n\nFor a long-channel MOSFET in saturation,\n\n\\[\nI_D=\\frac{1}{2}kV_{OV}^2,\\qquad\ng_m=kV_{OV}=\\frac{2I_D}{V_{OV}},\n\\]\n\nwhere \\(V_{OV}=V_{GS}-V_T\\).\n\n- **At fixed device dimensions and increasing \\(V_{OV}\\)**, \\(I_D\\) increases, so  \n  \\[\n  g_m=kV_{OV}\n  \\]\n  increases. **Student A is correct.**\n\n- **At fixed drain current**,  \n  \\[\n  g_m=\\frac{2I_D}{V_{OV}},\n  \\]\n  so increasing \\(V_{OV}\\) makes \\(g_m\\) decrease. **Student B is correct.**\n\nThus, the answer depends on the bias constraint; in the usual interpretation of increasing \\(V_{GS}\\) for the same MOSFET, **A** is correct.",
        "format": "markdown",
        "sha256": "0174e609c3512b797f078570fdb6d1d5b2c5dee893a7a95b6fa0f1599b5f0356"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that for a fixed device size, increasing overdrive increases gm because drain current also rises; it also correctly notes that gm decreases with overdrive only when drain current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 737,
        "total_tokens": 775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 737,
        "total_tokens": 775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be correct, depending on what is held constant.\n\nFor a long-channel MOSFET in saturation,\n\n\\[\nI_D=\\frac{1}{2}k_n V_{OV}^2,\\qquad\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}=k_nV_{OV}\n=\\frac{2I_D}{V_{OV}},\n\\]\n\nwhere \\(V_{OV}=V_{GS}-V_{TH}\\).\n\n- **If the device is swept to higher \\(V_{GS}\\)** with \\(k_n\\) fixed, \\(V_{OV}\\) increases and \\(g_m=k_nV_{OV}\\) **increases** — Student A.\n- **If \\(I_D\\) is held constant**, then \\(g_m=2I_D/V_{OV}\\), so increasing \\(V_{OV}\\) makes \\(g_m\\) **decrease** — Student B.\n\nThus, the answer depends on the bias constraint; there is no unconditional answer.",
        "format": "markdown",
        "sha256": "3b960db71eaa9ce6e88a050ec5b50ae07cccb65aa7c2ae54a28c9d8c645134c0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that for a fixed device size, increasing overdrive increases gm, while at fixed ID gm decreases with overdrive. This captures the essential distinction and identifies Student A as correct for a given transistor.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 729,
        "total_tokens": 767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 729,
        "total_tokens": 767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be correct depending on what is held constant.\n\nFor a long-channel MOSFET in saturation,\n\n\\[\nI_D=\\frac{1}{2}\\mu C_{\\text{ox}}\\frac WL V_{OV}^2\n\\]\n\nand\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}\n=\\mu C_{\\text{ox}}\\frac WL V_{OV}\n=\\frac{2I_D}{V_{OV}}.\n\\]\n\n- **For a fixed MOSFET as \\(V_{GS}\\), and hence \\(V_{OV}\\), increases:** \\(g_m\\) increases. **Student A is correct.**\n- **For a fixed drain current \\(I_D\\):** \\(g_m=2I_D/V_{OV}\\), so increasing \\(V_{OV}\\) reduces \\(g_m\\). **Student B is correct.**\n\nThus, the usual bias-sweep interpretation favors **Student A**, while the fixed-current design interpretation favors **Student B**.",
        "format": "markdown",
        "sha256": "f0eae2ab5d13a972e07dca826701aae940f278611ce151c311f2b0d45bf1ea81"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size, explains that gm rises with overdrive, and notes Student B's result applies when drain current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 729,
        "total_tokens": 767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 729,
        "total_tokens": 767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**They are essentially the same in topology, but not literally identical in polarity.**\n\nFor either device, the low-frequency small-signal model typically contains:\n\n- a transconductance source \\(g_m\\),\n- an output resistance \\(r_o=1/g_{ds}\\),\n- optionally a body-effect transconductance \\(g_{mb}\\),\n- and parasitic capacitances for high-frequency analysis.\n\nUsing the device’s natural voltage and current conventions:\n\n- **NMOS:** use \\(v_{gs}\\), \\(v_{ds}\\), and \\(i_{ds}\\); the controlled current source is directed from drain to source.\n- **PMOS:** use \\(v_{sg}\\), \\(v_{sd}\\), and \\(i_{sd}\\); the controlled current source is directed from source to drain.\n\nThus, the equations have the same form when magnitudes are used, but the voltage polarities and current directions must be reversed appropriately. Also, \\(g_m\\), \\(r_o\\), body-effect parameters, and capacitances may differ because the devices have different carrier mobilities and operating biases.\n\nSo: **same basic small-signal structure, but with opposite polarity conventions and generally different parameter values.**",
        "format": "markdown",
        "sha256": "7c4eabda387ba01bd5feb79a44aa916634cd7bbe98d403f512d34027707b344d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same basic form as the NMOS model, with reversed polarity and current conventions.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 4393,
        "total_tokens": 4419,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 4393,
        "total_tokens": 4419,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not literally, but they have the **same small-signal model structure** with opposite polarity conventions.\n\nFor an NMOS, one commonly uses:\n\n- \\(v_{gs}\\) as the controlling voltage\n- A controlled current source \\(g_m v_{gs}\\) from drain to source\n- \\(r_o\\) between drain and source\n- Optionally \\(g_{mb}\\) for body effect and parasitic capacitances\n\nFor a PMOS, it is convenient to use:\n\n- \\(v_{sg}\\) as the controlling voltage\n- A controlled current source \\(g_m v_{sg}\\) from source to drain\n- The same types of \\(r_o\\), body-effect, and capacitance elements\n\nThus, after reversing the voltage/current reference directions, the PMOS and NMOS models are essentially identical in topology. However, their controlled-source polarities and parameter values are different; for example, PMOS devices generally have lower \\(g_m\\) than similarly sized NMOS devices because hole mobility is lower.",
        "format": "markdown",
        "sha256": "cdabceaec1480e5a668ede69e1cdc385b0ebb8fe8985a731dda236a25cdce643"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that PMOS and NMOS small-signal models have the same structure after reversing polarity conventions; the additional parameter comparison does not undermine the answer.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3839,
        "total_tokens": 3865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3839,
        "total_tokens": 3865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Same topology, but not literally identical.** A PMOS model is the polarity-reversed version of an NMOS model.\n\n| Feature | NMOS | PMOS |\n|---|---|---|\n| Control voltage | \\(v_{gs}\\) | \\(v_{sg}\\) |\n| Conventional channel current | Drain \\(\\rightarrow\\) source | Source \\(\\rightarrow\\) drain |\n| Controlled source | \\(g_m v_{gs}\\) | \\(g_m v_{sg}\\) |\n| Output resistance | \\(r_o\\) between drain and source | Same |\n| Body effect | Included with \\(g_{mb}\\), if relevant | Same effect with reversed polarity |\n\nThus, both models contain a gate-controlled current source, an output resistance, and possibly body-effect and parasitic capacitance elements. The main differences are the voltage/current polarities, current-source direction, and parameter values. For example, PMOS mobility is lower than NMOS mobility, so their \\(g_m\\), \\(r_o\\), and capacitances may not be equal.\n\nIf the body is tied to the source, the body-effect term is usually omitted.",
        "format": "markdown",
        "sha256": "6bb2587507a907d757750380a9e2c186dcde0b34a99c206c820e967bc8bfcf13"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS model has the same topology/form as the NMOS model with reversed polarity and sign conventions. The parameter-value and body-effect notes are compatible with the answer.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3864,
        "total_tokens": 3890,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3864,
        "total_tokens": 3890,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Since the gate and drain of \\(M_1\\) are tied together,\n\n\\[\nV_{GS}=V_{DS}=V_X .\n\\]\n\nThus, when the NMOS turns on, it is always in saturation:\n\n\\[\nI_X =\n\\begin{cases}\n0, & V_X\\le V_{TN},\\\\[4pt]\n\\dfrac{\\beta_n}{2}(V_X-V_{TN})^2, & V_X>V_{TN},\n\\end{cases}\n\\]\n\nwhere \\(\\beta_n=\\mu_n C_{\\text{ox}}(W/L)\\). Therefore, \\(I_X\\) remains zero until \\(V_X=V_{TN}\\), then rises quadratically:\n\n```text\n I_X\n  ↑\n  │                         .\n  │                     .-´\n  │                 .-´\n  │             .-´\n  │____________.________________→ V_X\n              V_TN\n```\n\nChannel-length modulation would make the rising curve slightly steeper, by multiplying the second expression by \\((1+\\lambda V_X)\\).",
        "format": "markdown",
        "sha256": "87e933fec38d1ee8ae28207e087397df7044e6ed5fccd5979340cacc4f91459a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold and a quadratic rise above it, and appropriately notes channel-length modulation as a secondary effect.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 5926,
        "total_tokens": 7132,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 5926,
        "total_tokens": 7132,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Since the gate and drain of \\(M_1\\) are tied together,\n\n\\[\nV_{GS}=V_{DS}=V_X .\n\\]\n\nThus, once the NMOS turns on, it is always in saturation:\n\n\\[\nV_{DS}=V_{GS}\\ge V_{GS}-V_{TN}.\n\\]\n\nIgnoring channel-length modulation,\n\n\\[\nI_X =\n\\begin{cases}\n0, & V_X\\le V_{TN},\\\\[4pt]\n\\dfrac{1}{2}k_n\\left(V_X-V_{TN}\\right)^2, & V_X>V_{TN},\n\\end{cases}\n\\]\n\nwhere \\(k_n=\\mu_n C_{\\mathrm{ox}}(W/L)\\).\n\nSo the characteristic is zero up to \\(V_{TN}\\), then rises as a parabola:\n\n```text\n I_X\n  ^\n  |                         .\n  |                      .´\n  |                   .´\n  |                .´\n  |_____________.´________________> V_X\n                V_TN\n```\n\n(With channel-length modulation, the rising curve is slightly steeper.)",
        "format": "markdown",
        "sha256": "b2101cf31c1598214372cd47c5f8dbca0e1d48a30f566ce23a868aebd0cab7a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its saturation operation above threshold, and the zero-then-quadratic I_X–V_X characteristic. The channel-length-modulation note is also acceptable.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 4899,
        "total_tokens": 6105,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 4899,
        "total_tokens": 6105,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Since \\(M_1\\) is diode-connected,\n\n\\[\nV_G=V_D=V_X,\\qquad V_S=0\n\\]\n\nso that\n\n\\[\nV_{GS}=V_{DS}=V_X.\n\\]\n\nFor \\(V_X>V_T\\), the MOSFET is always in saturation because\n\n\\[\nV_{DS}=V_{GS}\\ge V_{GS}-V_T.\n\\]\n\nThus, neglecting channel-length modulation,\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\le V_T,\\\\[4pt]\n\\dfrac{1}{2}k_n(V_X-V_T)^2, & V_X>V_T,\n\\end{cases}\n\\]\n\nwhere \\(k_n=\\mu_n C_{\\text{ox}}W/L\\).\n\nTherefore, the \\(I_X\\)-versus-\\(V_X\\) plot is zero up to \\(V_T\\), then rises as a parabola in the first quadrant:\n\n```text\n I_X\n  ^\n  |                 .\n  |              .\n  |           .\n  |        .\n  |______.________________> V_X\n        V_T\n```\n\nFor a real MOSFET, there may be a small subthreshold current below \\(V_T\\), and channel-length modulation slightly changes the parabolic shape.",
        "format": "markdown",
        "sha256": "d3976e238cb70ff3d9adc286ef03ca8ef8fbcfe6c02d9185d84fbb197029b653"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its saturation operation above threshold, and the approximately quadratic current rise; this matches the full-credit rule.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 1834,
        "total_tokens": 3040,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 1834,
        "total_tokens": 3040,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is a long-channel nMOS transistor with its source grounded,\n\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1~\\text{V},\n\\]\n\nand \\(I_X\\) is the drain current. Let \\(V_T\\) be the threshold voltage and \\(\\beta_n=\\mu_n C_{\\text{ox}}W/L\\). Neglecting channel-length modulation,\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\le V_T,\\\\[4pt]\n\\dfrac{\\beta_n}{2}(V_X-V_T)^2,\n& V_T<V_X<V_T+1~\\text{V},\\\\[8pt]\n\\beta_n\\left[(V_X-V_T)(1~\\text{V})\n-\\dfrac{(1~\\text{V})^2}{2}\\right],\n& V_X\\ge V_T+1~\\text{V}.\n\\end{cases}\n\\]\n\nThus, \\(I_X\\) is:\n\n- zero until \\(V_X=V_T\\);\n- quadratic in \\(V_X\\) from \\(V_T\\) to \\(V_T+1\\) V, where the MOSFET is in saturation;\n- approximately linear for \\(V_X>V_T+1\\) V, where it is in the triode region.\n\n\\[\n\\begin{array}{c}\nI_X\\\\[-2pt]\n\\uparrow\\\\\n\\quad\\quad\\quad\\quad\\quad\\quad\\quad\\quad\\quad\\quad /\\\\\n\\quad\\quad\\quad\\quad\\quad\\quad\\quad\\quad\\quad /\\\\\n\\quad\\quad\\quad\\quad\\quad\\quad\\quad\\ \\cdot/\\\\\n\\quad\\quad\\quad\\quad\\quad\\quad\\ \\cdot\\\\\n\\underline{\\hspace{2.5cm}}\\ \\cdot\\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\longrightarrow V_X\\\\\n\\qquad V_T\\qquad\\qquad V_T+1~\\text{V}\n\\end{array}\n\\]\n\nThe transition current is \\(I_X=\\beta_n(1~\\text{V})^2/2\\).",
        "format": "markdown",
        "sha256": "70626270c6133636070b6c2befb58fa8ff07c1891d42953c24f0b8234073f37a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions, with the appropriate current expressions and the quadratic-to-roughly-linear trend.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 8766,
        "total_tokens": 10135,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 8766,
        "total_tokens": 10135,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an enhancement-mode nMOS transistor, its source is grounded, so\n\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\text{ V}.\n\\]\n\nLet \\(\\beta_n=\\mu_n C_{\\mathrm{ox}}(W/L)\\). Neglecting channel-length modulation,\n\n\\[\nI_X \\approx I_D=\n\\begin{cases}\n0, & V_X\\le V_{TN},\\\\[2mm]\n\\dfrac{\\beta_n}{2}(V_X-V_{TN})^2,\n& V_{TN}<V_X<V_{TN}+1\\text{ V},\\\\[2mm]\n\\beta_n\\left[(V_X-V_{TN})(1\\text{ V})\n-\\dfrac{(1\\text{ V})^2}{2}\\right],\n& V_X\\ge V_{TN}+1\\text{ V}.\n\\end{cases}\n\\]\n\nThus \\(I_X\\) is zero until threshold, rises quadratically while \\(M_1\\) is in saturation, and then continues approximately linearly in the triode region:\n\n```text\n I_X\n  ^\n  |                                  /\n  |                             ____/\n  |                         ____/\n  |                     ___/\n  |____________________/\n  +--------------------|--------------------> V_X\n                      V_TN              V_TN+1 V\n             cutoff       saturation       triode\n```\n\nAt the transition,\n\n\\[\nI_X=\\frac{\\beta_n}{2}(1\\text{ V})^2.\n\\]\n\nIf \\(V_X\\) is restricted to \\(0\\)–\\(1\\) V, only the cutoff and saturation portions are observed.",
        "format": "markdown",
        "sha256": "48a5403f65535110b6155965e7cde32e204daa9c83a6d6c42a869db5191a4f53"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives cutoff below threshold, quadratic saturation current up to V_X = V_TN + 1 V, and an approximately linear triode-region rise beyond that.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 24189,
        "total_tokens": 25558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 24189,
        "total_tokens": 25558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is a long-channel enhancement NMOS with its source grounded,\n\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\text{ V}\n\\]\n\nand \\(I_X\\) is the drain current. Neglecting channel-length modulation,\n\n\\[\nI_X =\n\\begin{cases}\n0, & V_X\\le V_{TN},\\\\[4pt]\n\\dfrac{1}{2}\\beta_n(V_X-V_{TN})^2,\n& V_{TN}<V_X\\le V_{TN}+1,\\\\[6pt]\n\\beta_n\\left[(V_X-V_{TN})(1)-\\dfrac{1}{2}(1)^2\\right],\n& V_X>V_{TN}+1,\n\\end{cases}\n\\]\n\nwhere \\(\\beta_n=\\mu_n C_{\\rm ox}W/L\\).\n\nThus, \\(I_X\\) is zero until \\(V_X=V_{TN}\\), rises quadratically while \\(M_1\\) is in saturation, and then rises approximately linearly after \\(V_X=V_{TN}+1\\text{ V}\\) when it enters the triode region.\n\n```text\n I_X\n  ^\n  |                                  /\n  |                              ___/   triode\n  |                          ___/\n  |                      ___/\n  |                  ___/             saturation\n  |_________________/\n  +----------------|-----------------|--------> V_X\n                  V_TN            V_TN + 1 V\n```\n\nThe current at the transition is \\(I_X=\\tfrac12\\beta_n(1\\text{ V})^2\\).",
        "format": "markdown",
        "sha256": "9432b8bf61b414501b865c0357a2f4f275017d0b0ead9c5a11d61a6e6c19a1ec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives zero current below threshold, quadratic saturation-region rise up to VTN + 1 V, and an approximately linear triode-region rise beyond it, with the appropriate piecewise equations.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 12265,
        "total_tokens": 13634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 12265,
        "total_tokens": 13634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—not as drawn.\n\nThe arrow indicates that the upper terminal is the source of a \\(p\\)-channel MOSFET. The gate and drain are both grounded, so if the upper-terminal voltage is \\(v_X\\),\n\n\\[\nV_{SG}=v_X,\\qquad V_{SD}=v_X .\n\\]\n\nAlthough the transistor may satisfy the saturation condition, its current is\n\n\\[\nI_X \\approx \\frac{\\beta_p}{2}\\left(v_X-|V_{TP}|\\right)^2\n\\]\n\n(neglecting channel-length modulation). Thus \\(I_X\\) changes with \\(v_X\\); the device is essentially a diode-connected MOSFET, not a current source.\n\nFor a MOSFET current source, the gate-to-source voltage must be held fixed while the drain voltage varies.",
        "format": "markdown",
        "sha256": "2eea257bca6bfe09ec419235a56d2708c4cc5609ad19c27d1b5b255e1fb222a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the PMOS and its diode-connected terminals, and explains that its current varies with terminal voltage. It does not explicitly identify the decisive low impedance (about 1/gm), so it does not meet the full-credit rule.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 28144,
        "total_tokens": 28644,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27970,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 28144,
        "total_tokens": 28644,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27970,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—**if the solid-channel symbol denotes a depletion-mode n-channel FET**. The gate and source are grounded, so\n\n\\[\nV_{GS}=0.\n\\]\n\nSince a depletion-mode device has \\(V_T<0\\), it is on at zero gate bias. When the drain voltage is sufficiently high,\n\n\\[\nV_{DS}\\ge V_{GS}-V_T=-V_T,\n\\]\n\nthe device enters saturation and\n\n\\[\nI_X \\approx I_{DSS}\n\\]\n\n(or \\(\\tfrac12 k_n V_T^2\\) in the long-channel model). Thus it behaves as an approximate **constant-current sink** over its compliance range, with some variation due to channel-length modulation.\n\nIf \\(M_1\\) were an ordinary enhancement-mode NMOS, \\(V_{GS}=0<V_T\\), so it would be off and could not provide a useful current source.",
        "format": "markdown",
        "sha256": "bff7aea7c96861ece1bcba281e41ebc913e1e88b9ee9a90cb102eb3bba18e8b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads M1 as a depletion-mode NMOS with grounded gate and source, then concludes it can act as a current source. As drawn, M1 is a diode-connected PMOS whose low impedance prevents it from acting as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 28164,
        "total_tokens": 28664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27970,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 28164,
        "total_tokens": 28664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27970,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—not as a useful nonzero current source in the connection shown.\n\nThe arrowed upper terminal is the source of the p-channel device, while the gate and drain are both grounded. If the upper-terminal voltage is \\(v\\),\n\n\\[\nV_{SG}=v,\\qquad V_{SD}=v.\n\\]\n\nAlthough the MOSFET may be in saturation for \\(v>|V_{TP}|\\), its current is\n\n\\[\nI_X \\approx \\frac{\\beta_p}{2}\\left(v-|V_{TP}|\\right)^2\n\\]\n\n(neglecting channel-length modulation). Thus \\(I_X\\) changes with the terminal voltage. It is a diode-connected MOSFET, not a current source; a fixed gate-source bias would be required.\n\nA depletion-mode MOSFET or JFET with its source grounded would be an exception: at \\(V_{GS}=0\\), it could act approximately as a current sink after pinch-off.",
        "format": "markdown",
        "sha256": "a02d389ecb335f923d3e542a311abdae4901eb4c157c48a7c80435e2c53d1264"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the PMOS and its grounded gate/drain connections, and explains that its diode-connected current varies with terminal voltage. It does not explicitly identify the low small-signal impedance (about 1/gm), which the full-credit rule requires.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 52003,
        "total_tokens": 52503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 51798,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 52003,
        "total_tokens": 52503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 51798,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The device is a **p-channel MOSFET**: its source is the upper terminal, connected through \\(R_S\\) to \\(V_{DD}\\), and its drain is connected through \\(R_D\\) to ground. Let \\(I\\) denote the dc current flowing from source to drain.\n\nAssume an ideal supply, no body effect, and initially neglect channel-length modulation.\n\n## 1. DC operating point\n\nLet \\(V_G\\) be the dc value of \\(V_{in}\\). The node voltages are\n\n\\[\nV_S=V_{DD}-IR_S\n\\]\n\nand\n\n\\[\nV_D=V_{\\text{out}}=IR_D.\n\\]\n\nTherefore,\n\n\\[\nV_{SG}=V_S-V_G=V_{DD}-IR_S-V_G\n\\]\n\nand\n\n\\[\nV_{SD}=V_S-V_D=V_{DD}-I(R_S+R_D).\n\\]\n\n### Cutoff\n\nThe PMOS is off if\n\n\\[\nV_{SG}\\leq |V_{TP}|.\n\\]\n\nThen\n\n\\[\nI=0,\\qquad V_S=V_{DD},\\qquad V_{\\text{out}}=0.\n\\]\n\n### Saturation\n\nFor a PMOS,\n\n\\[\nV_{SD}\\geq V_{SG}-|V_{TP}|.\n\\]\n\nIn saturation,\n\n\\[\nI=\\frac{\\beta_p}{2}\\left(V_{SG}-|V_{TP}|\\right)^2,\n\\]\n\nwhere\n\n\\[\n\\beta_p=\\mu_p C_{\\text{ox}}\\frac WL.\n\\]\n\nThus the bias current satisfies\n\n\\[\n\\boxed{\nI=\\frac{\\beta_p}{2}\n\\left(V_{DD}-IR_S-V_G-|V_{TP}|\\right)^2\n}\n\\]\n\nand\n\n\\[\n\\boxed{V_{\\text{out},Q}=IR_D}.\n\\]\n\nIf \\(R_S\\neq 0\\), define\n\n\\[\nA=V_{DD}-V_G-|V_{TP}|.\n\\]\n\nThen\n\n\\[\nV_{OV}=V_{SG}-|V_{TP}|\n=\\frac{\\sqrt{1+2\\beta_pR_SA}-1}{\\beta_pR_S},\n\\]\n\nand\n\n\\[\nI_Q=\\frac{\\beta_p}{2}V_{OV}^2.\n\\]\n\nThe saturation result is valid only if\n\n\\[\nV_{SD}\\geq V_{OV}.\n\\]\n\nEquivalently, using \\(V_D=IR_D\\),\n\n\\[\nV_{\\text{out},Q}\\leq V_G+|V_{TP}|.\n\\]\n\nIf this condition is not satisfied, the transistor is in the triode region, for which\n\n\\[\nI=\\beta_p\\left[\n(V_{SG}-|V_{TP}|)V_{SD}\n-\\frac{V_{SD}^2}{2}\n\\right].\n\\]\n\n---\n\n## 2. Small-signal voltage gain\n\nFor small-signal analysis, \\(V_{DD}\\) is an ac ground. Thus \\(R_S\\) provides source degeneration.\n\nThe transconductance is\n\n\\[\ng_m=\\beta_p V_{OV}\n=\\sqrt{2\\beta_p I_Q}.\n\\]\n\nNeglecting \\(r_o\\), the source signal is\n\n\\[\nv_s=\\frac{g_mR_S}{1+g_mR_S}v_{in}.\n\\]\n\nThe output voltage is\n\n\\[\nv_{\\text{out}}\n=-\\frac{g_mR_D}{1+g_mR_S}v_{in}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{in}}\n=-\\frac{g_mR_D}{1+g_mR_S}\n}\n\\]\n\nfor the unloaded circuit shown.\n\nThe negative sign means that the circuit is an **inverting common-source amplifier**. Increasing \\(v_{in}\\) reduces \\(V_{SG}\\), decreases the PMOS current, and consequently decreases \\(V_{\\text{out}}\\).\n\nIf channel-length modulation is included, with \\(r_o\\approx 1/(\\lambda I_Q)\\),\n\n\\[\n\\boxed{\nA_v=\n-\\frac{g_mR_Dr_o}\n{R_D+r_o+R_S+g_mR_Sr_o}\n}\n\\]\n\nand the output resistance is approximately\n\n\\[\nR_{\\text{out}}\n=R_D\\parallel\n\\left[r_o+(1+g_mr_o)R_S\\right].\n\\]\n\nThe MOS gate has ideally infinite input resistance. A numerical operating point requires \\(V_{DD}\\), \\(R_S\\), \\(R_D\\), \\(V_G\\), \\(V_{TP}\\), and \\(\\beta_p\\).",
        "format": "markdown",
        "sha256": "cb8ceda94124309ec16f7e0fe9f5ef299eacc8ae5e1c1a6bbccb7c9389aaa325"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain -gm RD/(1 + gm RS). The additional operating-point and ro analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 22541,
        "total_tokens": 23967,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 22541,
        "total_tokens": 23967,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is a p-channel MOSFET, as indicated by the source connected toward \\(V_{DD}\\). Let \\(I\\) be the dc current flowing from \\(V_{DD}\\) to ground.\n\n## 1. DC relationships\n\nThe source and drain voltages are\n\n\\[\nV_S=V_{DD}-IR_S\n\\]\n\nand\n\n\\[\nV_D=V_{out}=IR_D.\n\\]\n\nThus,\n\n\\[\nV_{SG}=V_S-V_{in}\n      =V_{DD}-IR_S-V_{in}\n\\]\n\nand\n\n\\[\nV_{SD}=V_S-V_D\n      =V_{DD}-I(R_S+R_D).\n\\]\n\nLet\n\n\\[\nV_T=|V_{TP}|,\\qquad\n\\beta_p=\\mu_p C_{ox}\\frac WL.\n\\]\n\nThe gate dc current is approximately zero.\n\n---\n\n## 2. Operating regions\n\n### Cutoff\n\nThe PMOS is off when\n\n\\[\nV_{SG}\\le V_T.\n\\]\n\nSince \\(I=0\\) in cutoff,\n\n\\[\nV_S=V_{DD},\\qquad V_{out}=0.\n\\]\n\nTherefore, the cutoff condition is\n\n\\[\nV_{in}\\ge V_{DD}-V_T.\n\\]\n\n---\n\n### Saturation\n\nFor a PMOS,\n\n\\[\nV_{SG}>V_T\n\\]\n\nand\n\n\\[\nV_{SD}\\ge V_{SG}-V_T.\n\\]\n\nNeglecting channel-length modulation,\n\n\\[\nI=\\frac{\\beta_p}{2}(V_{SG}-V_T)^2.\n\\]\n\nSubstitution gives\n\n\\[\nI=\\frac{\\beta_p}{2}\n\\left(V_{DD}-V_{in}-V_T-IR_S\\right)^2.\n\\]\n\nDefine\n\n\\[\nA=V_{DD}-V_{in}-V_T.\n\\]\n\nThen\n\n\\[\nI=\\frac{\\beta_p}{2}(A-IR_S)^2.\n\\]\n\nA convenient solution is obtained by defining the overdrive voltage \\(V_{OV}=V_{SG}-V_T\\):\n\n\\[\nV_{OV}\n=\n\\frac{\\sqrt{1+2\\beta_pR_S A}-1}{\\beta_pR_S},\n\\]\n\nand hence\n\n\\[\nI=\\frac{\\beta_p}{2}V_{OV}^2,\n\\qquad\nV_{out}=R_D I.\n\\]\n\nThe saturation result is valid only if\n\n\\[\nV_{SD}\\ge V_{OV}.\n\\]\n\nUsing the resistor relations, this can also be written as\n\n\\[\nV_{out}\\le V_{in}+V_T.\n\\]\n\n---\n\n### Triode region\n\nIf the transistor is on but does not satisfy the saturation condition, it operates in triode:\n\n\\[\nV_{SG}>V_T,\\qquad 0\\le V_{SD}<V_{SG}-V_T.\n\\]\n\nThe current is\n\n\\[\nI=\\beta_p\\left[\n(V_{SG}-V_T)V_{SD}\n-\\frac{V_{SD}^2}{2}\n\\right],\n\\]\n\nor explicitly,\n\n\\[\nI=\\beta_p\\left[\n\\left(V_{DD}-V_{in}-V_T-IR_S\\right)\n\\left(V_{DD}-I(R_S+R_D)\\right)\n-\\frac12\\left(V_{DD}-I(R_S+R_D)\\right)^2\n\\right].\n\\]\n\nThe output is still\n\n\\[\nV_{out}=IR_D.\n\\]\n\n---\n\n## 3. Qualitative voltage transfer\n\n- For large \\(V_{in}\\), \\(M_1\\) is off and \\(V_{out}\\approx 0\\).\n- As \\(V_{in}\\) is reduced, \\(V_{SG}\\) increases, the PMOS current increases, and \\(V_{out}\\) rises.\n- Thus, this is an inverting common-source amplifier:\n\n\\[\nV_{in}\\uparrow \\quad\\Longrightarrow\\quad V_{out}\\downarrow.\n\\]\n\nFor very strong conduction, the maximum output is limited approximately by the two resistors:\n\n\\[\nV_{out,\\max}\\approx\nV_{DD}\\frac{R_D}{R_S+R_D}.\n\\]\n\n---\n\n## 4. Small-signal voltage gain\n\nIf \\(M_1\\) is biased in saturation, define\n\n\\[\ng_m=\\beta_p V_{OV}\n     =\\frac{2I}{V_{OV}},\n\\qquad\nr_o\\approx\\frac{1}{\\lambda_p I}.\n\\]\n\nSince \\(V_{DD}\\) is an ac ground, \\(R_S\\) provides source degeneration. The voltage gain is\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\n-\\frac{g_mR_D}\n{1+g_mR_S+\\dfrac{R_S+R_D}{r_o}}.\n\\]\n\nIf channel-length modulation is neglected,\n\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_mR_D}{1+g_mR_S}\n}\n\\]\n\nThe negative sign confirms the inverting behavior. The ideal input resistance is approximately infinite because the MOSFET gate draws no current.",
        "format": "markdown",
        "sha256": "bd6f7f7bc182124a86d6a44c3ba3a32a4400889c6e8c8dbf046bbff726e4193e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a PMOS common-source stage with source degeneration and gives the inverting gain -gm RD/(1 + gm RS). The added operating-region analysis and finite-ro gain refinement are consistent.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 13528,
        "total_tokens": 14954,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 13528,
        "total_tokens": 14954,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **p-channel MOSFET common-source amplifier with source degeneration**. The upper terminal of \\(M_1\\) is the source, and the lower terminal is the drain.\n\nLet \\(I\\) be the dc current flowing from \\(V_{DD}\\) toward ground, and let \\(V_G=V_{in}\\) be the dc gate voltage.\n\n## 1. DC operating point\n\nFrom the two resistors,\n\n\\[\nV_S=V_{DD}-IR_S\n\\]\n\nand\n\n\\[\nV_{out}=V_D=IR_D.\n\\]\n\nThe MOSFET voltages are\n\n\\[\nV_{SG}=V_S-V_G\n\\]\n\nand\n\n\\[\nV_{SD}=V_S-V_D\n       =V_{DD}-I(R_S+R_D).\n\\]\n\nFor a pMOS transistor, define \\(V_{Tp}=|V_{TP}|\\).\n\n### Cutoff\n\nThe transistor is off when\n\n\\[\nV_{SG}\\le V_{Tp}.\n\\]\n\nSince \\(I=0\\) in cutoff,\n\n\\[\nV_S=V_{DD},\\qquad V_{out}=0,\n\\]\n\nand the cutoff condition becomes\n\n\\[\nV_G\\ge V_{DD}-V_{Tp}.\n\\]\n\n### Saturation\n\nThe pMOS is in saturation when\n\n\\[\nV_{SG}>V_{Tp}\n\\]\n\nand\n\n\\[\nV_{SD}\\ge V_{SG}-V_{Tp}.\n\\]\n\nNeglecting channel-length modulation,\n\n\\[\nI=\\frac{\\beta_p}{2}\\left(V_{SG}-V_{Tp}\\right)^2,\n\\]\n\nwhere \\(\\beta_p=\\mu_p C_{ox}(W/L)\\). Substituting the source voltage gives\n\n\\[\n\\boxed{\nI=\\frac{\\beta_p}{2}\n\\left(V_{DD}-IR_S-V_G-V_{Tp}\\right)^2\n}\n\\]\n\nand\n\n\\[\n\\boxed{V_{out}=IR_D}.\n\\]\n\nThe saturation condition can also be written as\n\n\\[\nV_{out}\\le V_G+V_{Tp}.\n\\]\n\nFor example, with\n\n\\[\nA=V_{DD}-V_G-V_{Tp},\n\\]\n\nthe saturation solution can be written as\n\n\\[\nV_{OV}=\n\\frac{\\sqrt{1+2\\beta_pR_S A}-1}{\\beta_pR_S},\n\\]\n\n\\[\nI=\\frac{\\beta_p}{2}V_{OV}^2,\n\\]\n\nwhere \\(V_{OV}=V_{SG}-V_{Tp}\\).\n\nIf the saturation condition is not satisfied, the device is in the triode region and\n\n\\[\nI=\\beta_p\\left[\n(V_{SG}-V_{Tp})V_{SD}\n-\\frac{V_{SD}^2}{2}\n\\right].\n\\]\n\n---\n\n## 2. Small-signal voltage gain\n\nAround a saturation-region operating point,\n\n\\[\ng_m=\\beta_p V_{OV}\n    =\\frac{2I}{V_{OV}}.\n\\]\n\nSince \\(V_{DD}\\) is an ac ground, \\(R_S\\) provides source degeneration. Neglecting \\(r_o\\),\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=-\\frac{g_mR_D}{1+g_mR_S}\n}\n\\]\n\nor equivalently,\n\n\\[\nA_v=-\\frac{R_D}{R_S+1/g_m}.\n\\]\n\nThe negative sign shows that the stage is **inverting**: increasing the gate voltage reduces \\(V_{SG}\\), decreases the pMOS current, and therefore decreases \\(V_{out}\\).\n\nThe small-signal source voltage is\n\n\\[\nv_s=\\frac{g_mR_S}{1+g_mR_S}v_{in}.\n\\]\n\nIf channel-length modulation is included, with \\(r_o\\) the transistor output resistance,\n\n\\[\n\\boxed{\nA_v=\n-\\frac{g_mR_D}\n{1+g_mR_S+(R_S+R_D)/r_o}\n}\n\\]\n\nfor the unloaded circuit.\n\nThe input and output resistances are approximately\n\n\\[\nR_{in}\\approx\\infty\n\\]\n\nfor an ideal MOS gate, and\n\n\\[\nR_{out}\\approx\nR_D\\parallel\\left[r_o+(1+g_mr_o)R_S\\right].\n\\]\n\nIf \\(r_o\\) is neglected, \\(R_{out}\\approx R_D\\).\n\nThus, the circuit is an **inverting pMOS common-source amplifier**, with \\(R_S\\) providing dc bias stabilization and negative feedback.",
        "format": "markdown",
        "sha256": "99f697ef264e28fc8175c67f17839f78acb650182b669793867d962d2fcfebc2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain \u0002-g_mR_D/(1+g_mR_S)\u0002. The additional DC and finite-\u0002r_o\u0002 analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 21173,
        "total_tokens": 22599,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 21173,
        "total_tokens": 22599,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS common-drain amplifier**, also called a **source follower**. The drain is connected to \\(V_{DD}\\), the source is connected to \\(R_S\\), and the output is taken at the source.\n\nAssume an enhancement NMOS, no body effect, and initially neglect channel-length modulation.\n\n### DC operation\n\nSince the MOS gate draws no dc current,\n\n\\[\nI_D=I_S=\\frac{V_{out}}{R_S}\n\\]\n\nand\n\n\\[\nV_{GS}=V_{in}-V_{out}, \\qquad\nV_{DS}=V_{DD}-V_{out}.\n\\]\n\nWhen \\(M_1\\) is in saturation,\n\n\\[\nI_D=\\frac{1}{2}\\beta_n\n\\left(V_{in}-V_{out}-V_T\\right)^2,\n\\]\n\nwhere\n\n\\[\n\\beta_n=\\mu_n C_{\\mathrm{ox}}\\frac WL.\n\\]\n\nThus the output voltage is determined by\n\n\\[\n\\boxed{\\frac{V_{out}}{R_S}\n=\\frac{1}{2}\\beta_n\n\\left(V_{in}-V_{out}-V_T\\right)^2}\n\\]\n\nor, equivalently,\n\n\\[\nV_{in}=V_{out}+V_T+\n\\sqrt{\\frac{2V_{out}}{\\beta_nR_S}}.\n\\]\n\nTherefore, the source voltage follows the gate voltage, but is lower by the required \\(V_{GS}\\):\n\n\\[\nV_{out}\\approx V_{in}-V_T-V_{OV},\n\\]\n\nwhere \\(V_{OV}=V_{GS}-V_T\\).\n\nFor \\(V_{in}\\leq V_T\\), the transistor is off and, neglecting leakage,\n\n\\[\nV_{out}\\approx 0.\n\\]\n\nThe saturation condition is\n\n\\[\nV_{DS}\\geq V_{GS}-V_T,\n\\]\n\nwhich gives\n\n\\[\nV_{DD}-V_{out}\\geq V_{in}-V_{out}-V_T\n\\]\n\nor\n\n\\[\n\\boxed{V_{in}\\leq V_{DD}+V_T.}\n\\]\n\nFor larger input voltages, the MOSFET enters the triode region and \\(V_{out}\\) approaches \\(V_{DD}\\).\n\n---\n\n### Small-signal voltage gain\n\nAt the bias point, let\n\n\\[\ng_m=\\frac{2I_D}{V_{OV}}=\\beta_nV_{OV}.\n\\]\n\nWith \\(V_{DD}\\) treated as ac ground, the small-signal source-node equation is\n\n\\[\n\\frac{v_o}{R_S}=g_m(v_i-v_o).\n\\]\n\nHence\n\n\\[\n\\boxed{A_v=\\frac{v_o}{v_i}\n=\\frac{g_mR_S}{1+g_mR_S}}\n\\]\n\nif \\(r_o\\) and body effect are neglected.\n\nThus,\n\n\\[\n0<A_v<1,\n\\]\n\nand for \\(g_mR_S\\gg 1\\),\n\n\\[\nA_v\\approx 1.\n\\]\n\nIncluding channel-length modulation, replace \\(R_S\\) by \\(R_S\\parallel r_o\\):\n\n\\[\nA_v=\n\\frac{g_m(R_S\\parallel r_o)}\n{1+g_m(R_S\\parallel r_o)}.\n\\]\n\nIf body effect is included,\n\n\\[\nA_v=\n\\frac{g_m}\n{g_m+g_{mb}+g_o+1/R_S}.\n\\]\n\n---\n\n### Input and output resistance\n\nIdeally, the MOS gate draws no current, so\n\n\\[\n\\boxed{R_{in}\\approx \\infty}\n\\]\n\nat low frequency.\n\nLooking into the output with the input set to zero,\n\n\\[\n\\boxed{\nR_{out}\\approx\nR_S\\parallel \\frac{1}{g_m}\n}\n\\]\n\nwhen \\(r_o\\) and body effect are neglected. More generally,\n\n\\[\nR_{out}=\n\\left(\n\\frac1{R_S}+g_m+g_{mb}+g_o\n\\right)^{-1}.\n\\]\n\nTherefore, the circuit provides:\n\n- high input resistance,\n- low output resistance,\n- noninverting voltage gain close to unity,\n- a dc level shift of approximately \\(V_{GS}\\) between input and output.\n\nIt is consequently used as a voltage buffer.",
        "format": "markdown",
        "sha256": "62966dcc56e810965ce762d013938f2080cfd996cc1bd3a7240482eb7e5209c5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, \\(g_mR_S/(1+g_mR_S)\\). The additional analysis is consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 12827,
        "total_tokens": 13976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 12827,
        "total_tokens": 13976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS common-drain amplifier**, also called a **source follower**. The drain is connected to \\(V_{DD}\\), the output is taken from the source, and \\(R_S\\) provides the dc bias current and source load.\n\nAssume \\(V_{in}\\) includes a dc bias plus a small signal, and initially neglect body effect and channel-length modulation.\n\n### 1. DC operation\n\nThe source voltage is the output voltage, so\n\n\\[\nI_D=I_S=\\frac{V_{out}}{R_S}\n\\]\n\nand\n\n\\[\nV_{GS}=V_{in}-V_{out}.\n\\]\n\nFor an NMOS operating in saturation,\n\n\\[\nI_D=\\frac{1}{2}\\beta_n(V_{GS}-V_{TN})^2,\n\\]\n\nwhere\n\n\\[\n\\beta_n=\\mu_n C_{\\text{ox}}\\frac WL.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\\frac{V_{out}}{R_S}\n=\\frac{1}{2}\\beta_n\n\\left(V_{in}-V_{out}-V_{TN}\\right)^2}\n\\]\n\nThis shows that the source voltage follows the gate voltage, but is lower by approximately \\(V_{TN}+V_{OV}\\):\n\n\\[\nV_{out}\\approx V_{in}-V_{TN}-V_{OV}.\n\\]\n\nHere \\(V_{OV}=V_{GS}-V_{TN}\\) is the overdrive voltage.\n\nUsing \\(U=V_{in}-V_{TN}\\), the explicit solution is\n\n\\[\nV_{out}\n=\n\\frac{1+\\beta_nR_SU-\\sqrt{1+2\\beta_nR_SU}}\n{\\beta_nR_S},\n\\qquad U>0.\n\\]\n\nIf \\(V_{in}\\leq V_{TN}\\), the transistor is off and, neglecting leakage,\n\n\\[\n\\boxed{V_{out}\\approx 0.}\n\\]\n\nThe saturation condition is\n\n\\[\nV_{DS}\\geq V_{GS}-V_{TN},\n\\]\n\nor\n\n\\[\nV_{DD}-V_{out}\\geq V_{in}-V_{out}-V_{TN}.\n\\]\n\nThus, for a constant threshold voltage,\n\n\\[\n\\boxed{V_{in}\\leq V_{DD}+V_{TN}.}\n\\]\n\nFor larger input voltages, the transistor enters the triode region and \\(V_{out}\\) approaches \\(V_{DD}\\).\n\n---\n\n### 2. Small-signal voltage gain\n\nLet the transistor be biased at \\(I_Q\\), with\n\n\\[\ng_m=\\beta_n V_{OV}\n=\\frac{2I_Q}{V_{OV}}.\n\\]\n\nAt signal frequencies, \\(V_{DD}\\) is an ac ground. The small-signal source-node equation is\n\n\\[\n\\left(\\frac{1}{R_S}+g_m\\right)v_{out}\n=g_m v_{in}.\n\\]\n\nHence,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\\frac{g_mR_S}{1+g_mR_S}\n}\n\\]\n\nor, equivalently,\n\n\\[\n\\boxed{A_v=\\frac{g_m}{g_m+1/R_S}.}\n\\]\n\nThus,\n\n\\[\n0<A_v<1,\n\\]\n\nand for \\(g_mR_S\\gg 1\\),\n\n\\[\nA_v\\approx 1.\n\\]\n\nThe circuit is therefore a **noninverting voltage buffer**.\n\nIncluding channel-length modulation and body effect gives\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m}\n{g_m+g_{mb}+g_o+1/R_S}\n}\n\\]\n\nwhere \\(g_{mb}\\) is the body-effect transconductance and \\(g_o=1/r_o\\).\n\n---\n\n### 3. Input and output resistance\n\nSince the MOS gate draws essentially no current,\n\n\\[\n\\boxed{R_{in}\\approx \\infty}\n\\]\n\nat low and midband frequencies.\n\nLooking into the source with the input voltage set to zero,\n\n\\[\n\\boxed{\nR_{out}\n=\nR_S\\parallel\n\\frac{1}{g_m+g_{mb}+g_o}\n}\n\\]\n\nand, neglecting body effect and channel-length modulation,\n\n\\[\n\\boxed{\nR_{out}\\approx R_S\\parallel\\frac{1}{g_m}.\n}\n\\]\n\nTherefore, the source follower has:\n\n- high input resistance,\n- low output resistance,\n- voltage gain close to unity,\n- no phase inversion.\n\nIf the body is tied to ground rather than to the source, body effect increases the effective source conductance and slightly reduces the voltage gain.",
        "format": "markdown",
        "sha256": "ba9bf6299bea0315ecd9cda711b0bbcbb0360af1e2f0274e16f59a9e01ae1a83"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, \\(g_mR_S/(1+g_mR_S)\\). The added output-resistance and body-effect analysis is consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 11858,
        "total_tokens": 13007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 11858,
        "total_tokens": 13007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an n-channel enhancement MOSFET, with channel-length modulation and body effect initially neglected. The drain is connected to \\(V_{DD}\\), so this is a **common-drain amplifier**, also called a **source follower**.\n\n## 1. DC operation\n\nThe source voltage is the output voltage:\n\n\\[\nV_S=V_{out}\n\\]\n\nSince the only DC path from the source is through \\(R_S\\),\n\n\\[\nI_D=\\frac{V_{out}}{R_S}\n\\]\n\nand\n\n\\[\nV_{GS}=V_{in}-V_{out},\\qquad\nV_{DS}=V_{DD}-V_{out}.\n\\]\n\n### Cutoff\n\nIf\n\n\\[\nV_{in}\\le V_T,\n\\]\n\nthe MOSFET is off and\n\n\\[\nI_D\\approx 0,\\qquad V_{out}\\approx 0.\n\\]\n\n### Saturation operation\n\nFor\n\n\\[\nV_{in}>V_T\n\\]\n\nand assuming saturation,\n\n\\[\nI_D=\\frac{1}{2}\\beta_n(V_{GS}-V_T)^2,\n\\]\n\nwhere\n\n\\[\n\\beta_n=\\mu_n C_{\\text{ox}}\\frac WL.\n\\]\n\nThus,\n\n\\[\n\\frac{V_{out}}{R_S}\n=\n\\frac{1}{2}\\beta_n\n\\left(V_{in}-V_{out}-V_T\\right)^2.\n\\]\n\nEquivalently,\n\n\\[\nV_{in}=V_T+V_{out}\n+\\sqrt{\\frac{2V_{out}}{\\beta_nR_S}}.\n\\]\n\nLet \\(A=V_{in}-V_T\\) and \\(K=\\beta_nR_S\\). The physical solution is\n\n\\[\n\\boxed{\nV_{out}\n=\n\\frac{1+KA-\\sqrt{1+2KA}}{K}\n}\n\\]\n\nfor \\(A>0\\).\n\nThe saturation condition is\n\n\\[\nV_{DS}\\ge V_{GS}-V_T.\n\\]\n\nSubstituting the node voltages gives\n\n\\[\nV_{DD}-V_{out}\n\\ge V_{in}-V_{out}-V_T,\n\\]\n\nor\n\n\\[\n\\boxed{V_{in}\\le V_{DD}+V_T}.\n\\]\n\nFor larger input voltages, the MOSFET enters the triode region and \\(V_{out}\\) approaches \\(V_{DD}\\).\n\n---\n\n## 2. Small-signal voltage gain\n\nAt signal frequencies, \\(V_{DD}\\) is an AC ground. Let\n\n\\[\ng_m=\\beta_n V_{OV}\n=\\frac{2I_D}{V_{OV}},\n\\]\n\nwhere\n\n\\[\nV_{OV}=V_{GS}-V_T.\n\\]\n\nApplying small-signal KCL at the source gives\n\n\\[\n\\frac{v_o}{R_S}=g_m(v_i-v_o).\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\n=\\frac{g_mR_S}{1+g_mR_S}\n}\n\\]\n\nwhen \\(r_o\\) and body effect are neglected.\n\nThus, the source follower has:\n\n- Positive, non-inverting voltage gain\n- Voltage gain less than unity\n- Gain approaching unity when \\(g_mR_S\\gg1\\)\n\nIn terms of the operating point,\n\n\\[\nI_D=\\frac{V_{out}}{R_S}.\n\\]\n\n---\n\n## 3. Input and output resistance\n\nFor an ideal MOS gate,\n\n\\[\n\\boxed{R_{in}\\approx\\infty}\n\\]\n\nat low and midband frequencies.\n\nWith the input set to zero, the small-signal output resistance is\n\n\\[\n\\boxed{\nR_{out}=R_S\\parallel\\frac{1}{g_m}\n}\n\\]\n\nwhen \\(r_o\\) and body effect are neglected.\n\nIncluding channel-length modulation,\n\n\\[\n\\boxed{\nR_{out}=R_S\\parallel r_o\\parallel \\frac{1}{g_m}\n}\n\\]\n\nand the gain becomes\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m(R_S\\parallel r_o)}\n{1+g_m(R_S\\parallel r_o)}\n}.\n\\]\n\nIf body effect is included, \\(g_m\\) in the denominator is replaced by \\(g_m+g_{mb}\\).\n\n## Main result\n\nThis circuit is a **source follower**:\n\n\\[\nV_{out}\\approx V_{in}-V_T-V_{OV}\n\\]\n\nfor DC operation, while its small-signal gain is\n\n\\[\n\\boxed{A_v\\approx \\frac{g_mR_S}{1+g_mR_S}<1}.\n\\]\n\nIt provides high input resistance and low output resistance, making it useful as a buffer.",
        "format": "markdown",
        "sha256": "829a67560b9b0acf9d7a3c1bc68a0ad7cdc0b41c191b45f687cd487c93d2b149"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, \\(g_mR_S/(1+g_mR_S)\\). The additional analysis is supplementary and does not undermine the essential result.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 9455,
        "total_tokens": 10604,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8449,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 9455,
        "total_tokens": 10604,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8449,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistor is an **NMOS common-gate amplifier**:\n\n- Drain: connected to \\(V_{\\text{out}}\\)\n- Source: driven by \\(V_{\\text{in}}\\)\n- Gate: tied to \\(V_{DD}\\)\n- Drain load: \\(R_D\\)\n\nThe input is therefore applied to the source while the gate is common to the supply.\n\n## DC operation\n\nLet the dc input level be \\(V_{I Q}\\). Then\n\n\\[\nV_{G Q}=V_{DD},\\qquad V_{S Q}=V_{I Q},\\qquad V_{D Q}=V_{O Q}\n\\]\n\nand\n\n\\[\nV_{GS,Q}=V_{DD}-V_{I Q}\n\\]\n\n\\[\nV_{DS,Q}=V_{O Q}-V_{I Q}\n\\]\n\nThe resistor current is\n\n\\[\nI_{D Q}=\\frac{V_{DD}-V_{O Q}}{R_D}.\n\\]\n\nIf \\(M_1\\) is in saturation and channel-length modulation is neglected,\n\n\\[\nI_{D Q}=\\frac{\\beta_n}{2}\n\\left(V_{DD}-V_{I Q}-V_T\\right)^2\n\\]\n\nso that\n\n\\[\nV_{O Q}\n=V_{DD}-\\frac{\\beta_n R_D}{2}\n\\left(V_{DD}-V_{I Q}-V_T\\right)^2 .\n\\]\n\nThe saturation condition is\n\n\\[\nV_{DS,Q}\\geq V_{GS,Q}-V_T,\n\\]\n\nwhich, for this circuit, becomes\n\n\\[\nV_{O Q}\\geq V_{DD}-V_T.\n\\]\n\nIf \\(V_{I Q}\\geq V_{DD}-V_T\\), the transistor is cut off and \\(V_{\\text{out}}\\approx V_{DD}\\). If the saturation condition is not satisfied, the transistor operates in the triode region instead.\n\n## Small-signal voltage gain\n\nFor small signals, \\(V_{DD}\\) is an ac ground, so\n\n\\[\nv_g=0,\\qquad v_s=v_{\\text{in}},\\qquad v_d=v_{\\text{out}}.\n\\]\n\nThus,\n\n\\[\nv_{gs}=-v_{\\text{in}}.\n\\]\n\nIgnoring \\(r_o\\) and body effect, the drain-current change is\n\n\\[\ni_d=g_m v_{gs}=-g_m v_{\\text{in}}.\n\\]\n\nThe resulting output voltage is\n\n\\[\nv_{\\text{out}}=g_m R_D\\,v_{\\text{in}},\n\\]\n\nhence\n\n\\[\n\\boxed{A_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n\\approx +g_mR_D}\n\\]\n\nThe gain is **positive**, so the common-gate stage is noninverting. Increasing the source voltage reduces \\(V_{GS}\\), reducing drain current and therefore reducing the voltage drop across \\(R_D\\); consequently, \\(V_{\\text{out}}\\) increases.\n\nIncluding transistor output resistance,\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m+g_o}{1/R_D+g_o}\n=(g_m+g_o)(R_D\\parallel r_o)\n}\n\\]\n\nwhere \\(g_o=1/r_o\\). If body effect is included, replace \\(g_m\\) by \\(g_m+g_{mb}\\).\n\n## Input and output resistance\n\nThe source input resistance is low:\n\n\\[\n\\boxed{R_{\\text{in}}\\approx \\frac{1}{g_m}}\n\\]\n\nor approximately \\(1/(g_m+g_{mb})\\) with body effect.\n\nLooking into the drain,\n\n\\[\n\\boxed{R_{\\text{out}}\\approx R_D\\parallel r_o}\n\\]\n\nand, if \\(r_o\\gg R_D\\),\n\n\\[\nR_{\\text{out}}\\approx R_D.\n\\]\n\nThus, the circuit is a **noninverting, low-input-resistance, voltage-gain common-gate amplifier**. A dc bias level for \\(V_{\\text{in}}\\) is required; without device parameters and a bias point, no numerical gain or operating current can be determined.",
        "format": "markdown",
        "sha256": "eb9a49cf21aa464dac8f7aa9c4770641f5406c8159bc0f5efabce757e3057993"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and gives the positive gain, low source input resistance, and appropriate output-resistance relation. The additional DC and nonideal analyses are consistent with the circuit.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 22637,
        "total_tokens": 23753,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 22637,
        "total_tokens": 23753,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an nMOS transistor, \\(V_{DD}\\) is ideal, and initially neglect body effect and channel-length modulation. The circuit is a **common-gate amplifier**: the input is applied at the source, the output is taken from the drain, and the gate is fixed at \\(V_{DD}\\).\n\n## DC/large-signal relations\n\n\\[\nV_G=V_{DD},\\qquad V_S=V_{in},\\qquad V_D=V_{out}\n\\]\n\nThus,\n\n\\[\nV_{GS}=V_{DD}-V_{in}\n\\]\n\nand\n\n\\[\nV_{DS}=V_{out}-V_{in}.\n\\]\n\nThe drain current is also set by the resistor:\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}.\n\\]\n\nLet\n\n\\[\n\\beta_n=\\mu_n C_{\\mathrm{ox}}\\frac WL,\\qquad\nV_{OV}=V_{DD}-V_{in}-V_{TN}.\n\\]\n\n### 1. Cutoff\n\nIf\n\n\\[\nV_{GS}\\le V_{TN}\n\\]\n\nor\n\n\\[\nV_{in}\\ge V_{DD}-V_{TN},\n\\]\n\nthe transistor is off:\n\n\\[\nI_D=0,\\qquad V_{out}=V_{DD}.\n\\]\n\n### 2. Saturation\n\nIf \\(V_{OV}>0\\) and \\(V_{DS}\\ge V_{OV}\\),\n\n\\[\nI_D=\\frac12\\beta_n V_{OV}^2.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{V_{out}\n=V_{DD}-\\frac12\\beta_nR_D\n\\left(V_{DD}-V_{in}-V_{TN}\\right)^2}\n\\]\n\nprovided that\n\n\\[\nV_{out}\\ge V_{DD}-V_{TN}.\n\\]\n\nThe saturation-to-triode transition occurs when\n\n\\[\nV_{out}=V_{DD}-V_{TN}\n\\]\n\nor equivalently,\n\n\\[\n\\frac12\\beta_nR_DV_{OV}^2=V_{TN}.\n\\]\n\n### 3. Triode region\n\nWhen the saturation expression predicts \\(V_{out}<V_{DD}-V_{TN}\\), the transistor is in the triode region:\n\n\\[\nI_D=\\beta_n\n\\left[\nV_{OV}(V_{out}-V_{in})\n-\\frac12(V_{out}-V_{in})^2\n\\right].\n\\]\n\nTogether with the resistor equation,\n\n\\[\n\\boxed{\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\beta_n\n\\left[\n(V_{DD}-V_{in}-V_{TN})(V_{out}-V_{in})\n-\\frac12(V_{out}-V_{in})^2\n\\right]\n}\n\\]\n\nwhich determines \\(V_{out}\\).\n\n## Small-signal operation\n\nSince \\(V_{DD}\\) is an AC ground,\n\n\\[\nv_g=0,\\qquad v_s=v_{in},\n\\]\n\nso\n\n\\[\nv_{gs}=-v_{in}.\n\\]\n\nAn increase in \\(v_{in}\\) reduces \\(v_{GS}\\), reducing \\(I_D\\). The voltage drop across \\(R_D\\) then decreases, so \\(v_{out}\\) increases. Hence the voltage gain is **positive**.\n\nFor operation in saturation,\n\n\\[\ng_m=\\beta_n V_{OV}\n=\\frac{2I_D}{V_{OV}}.\n\\]\n\nNeglecting \\(r_o\\) and body effect,\n\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}\\approx +g_mR_D}\n\\]\n\nso the common-gate stage is noninverting.\n\nIncluding channel-length modulation,\n\n\\[\nA_v\\approx +g_m(R_D\\parallel r_o).\n\\]\n\nIf body effect is important, replace \\(g_m\\) approximately by \\(g_m+g_{mb}\\).\n\nThe approximate input and output resistances are\n\n\\[\n\\boxed{R_{in}\\approx \\frac{1}{g_m}}\n\\]\n\nand\n\n\\[\n\\boxed{R_{out}\\approx R_D\\parallel r_o}.\n\\]\n\nThus, this circuit has a **low input resistance**, a relatively high voltage gain, and no phase inversion. Numerical values require \\(V_{DD}\\), \\(R_D\\), \\(V_{TN}\\), and the transistor parameter \\(\\beta_n\\).",
        "format": "markdown",
        "sha256": "509cb7ea98dd58c9f06fa15e2ddee93a934314ff5887417daa6b46f9626bc0e0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology and gives the essential results: source input resistance about 1/gm and non-inverting gain about +gm(RD || ro). The additional operating-region analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 14928,
        "total_tokens": 16044,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 14928,
        "total_tokens": 16044,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an n-channel MOSFET and neglect body effect initially. The upper terminal is the drain, the lower terminal is the source, and the gate is tied to \\(V_{DD}\\).\n\nThis is a **common-gate amplifier**: the input is applied at the source, the output is taken at the drain, and the gate is at ac ground because \\(V_{DD}\\) is an ac ground.\n\n## DC operation\n\nThe transistor voltages are\n\n\\[\nV_{GS}=V_{DD}-V_{in}\n\\]\n\nand\n\n\\[\nV_{DS}=V_{out}-V_{in}.\n\\]\n\nThe drain current is set by the resistor:\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}.\n\\]\n\n### Cutoff\n\nThe transistor is off when\n\n\\[\nV_{GS}\\le V_T,\n\\]\n\nor\n\n\\[\nV_{in}\\ge V_{DD}-V_T.\n\\]\n\nThen\n\n\\[\nI_D=0,\\qquad V_{out}=V_{DD}.\n\\]\n\n### Saturation\n\nIf the transistor is in saturation,\n\n\\[\nI_D=\\frac{1}{2}\\beta (V_{DD}-V_{in}-V_T)^2,\n\\]\n\nwhere\n\n\\[\n\\beta=\\mu_n C_{\\text{ox}}\\frac WL.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{V_{out}\n=V_{DD}-\\frac{1}{2}\\beta R_D\n(V_{DD}-V_{in}-V_T)^2}\n\\]\n\nprovided that\n\n\\[\nV_{DS}\\ge V_{GS}-V_T.\n\\]\n\nFor this circuit, the saturation condition becomes\n\n\\[\nV_{out}\\ge V_{DD}-V_T.\n\\]\n\nIf the output falls below this value, the MOSFET enters the triode region, where\n\n\\[\nI_D=\\beta\\left[\n(V_{DD}-V_{in}-V_T)(V_{out}-V_{in})\n-\\frac12(V_{out}-V_{in})^2\n\\right].\n\\]\n\n## Small-signal voltage gain\n\nLet the transistor be biased in saturation. Since the gate is connected to \\(V_{DD}\\),\n\n\\[\nv_g=0,\\qquad v_s=v_{in},\n\\]\n\nso\n\n\\[\nv_{gs}=v_g-v_s=-v_{in}.\n\\]\n\nNeglecting channel-length modulation, the small-signal drain current is\n\n\\[\ni_d=g_m v_{gs}=-g_m v_{in}.\n\\]\n\nApplying KCL at the output gives\n\n\\[\n\\frac{v_{out}}{R_D}=g_m v_{in}.\n\\]\n\nThus,\n\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=+g_mR_D}\n\\]\n\nwhere\n\n\\[\ng_m=\\beta V_{OV}\n=\\frac{2I_D}{V_{OV}},\n\\qquad\nV_{OV}=V_{DD}-V_{in,Q}-V_T.\n\\]\n\nThe gain is **positive**, so this amplifier is noninverting. Increasing the source voltage reduces \\(V_{GS}\\), reducing \\(I_D\\); the voltage drop across \\(R_D\\) then decreases and \\(V_{out}\\) rises.\n\nIncluding channel-length modulation,\n\n\\[\n\\boxed{A_v\\simeq (g_m+g_o)(R_D\\parallel r_o)\n\\approx g_m(R_D\\parallel r_o)}\n\\]\n\nwhere \\(g_o=1/r_o\\).\n\n## Resistances\n\nIgnoring \\(r_o\\) and body effect,\n\n\\[\n\\boxed{R_{in}\\simeq \\frac{1}{g_m}}\n\\]\n\nlooking into the source, and\n\n\\[\n\\boxed{R_{out}\\simeq R_D\\parallel r_o}.\n\\]\n\nIf body effect is included, \\(g_m\\) is replaced approximately by \\(g_m+g_{mb}\\) in the gain and input-resistance expressions.",
        "format": "markdown",
        "sha256": "4cbcd704bd0735f9a14b36f7326d4743dd9dbbcc2047ded76dc4108b174f31b1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology, source input, ac-grounded gate, positive gain, and approximately 1/gm input resistance. The added DC-region analysis and ro correction are also consistent with the circuit.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 12758,
        "total_tokens": 13874,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 12758,
        "total_tokens": 13874,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an NMOS transistor and \\(V_b\\) is a stiff gate-bias voltage, the intended circuit is a **common-gate amplifier**: the signal is applied to the source and the output is taken from the drain.\n\n## 1. DC operating point\n\nAt dc, \\(C_1\\) is open, so \\(V_{\\text{in}}\\) has no dc effect. If the source is at dc ground,\n\n\\[\nV_{GSQ}=V_b,\\qquad V_{DSQ}=V_{OQ}.\n\\]\n\nIgnoring channel-length modulation,\n\n\\[\nI_{DQ}=\\frac{1}{2}k_n(V_b-V_T)^2,\n\\qquad\nk_n=\\mu_n C_{\\text{ox}}\\frac WL .\n\\]\n\nThe quiescent output voltage is\n\n\\[\nV_{OQ}=V_{DD}-I_{DQ}R_D.\n\\]\n\nFor operation in saturation,\n\n\\[\nV_{OQ}\\ge V_b-V_T.\n\\]\n\nIf \\(V_b\\le V_T\\), the transistor is off and \\(V_{OQ}\\approx V_{DD}\\).\n\nThe small-signal parameters are\n\n\\[\ng_m=\\frac{2I_{DQ}}{V_b-V_T},\n\\qquad\nr_o\\approx\\frac{1}{\\lambda I_{DQ}}.\n\\]\n\n## 2. Midband voltage gain\n\nAt signal frequencies, \\(V_{DD}\\) and \\(V_b\\) are ac grounds. Let \\(v_s\\) be the signal voltage at the source. Then\n\n\\[\nv_g=0,\\qquad v_{gs}=-v_s.\n\\]\n\nThus, when the source voltage rises, the drain current decreases and the drain voltage rises. The amplifier is therefore **noninverting**.\n\nIncluding \\(r_o\\), KCL at the drain gives\n\n\\[\n\\frac{v_o}{R_D}+\\frac{v_o-v_s}{r_o}-g_m v_s=0.\n\\]\n\nHence,\n\n\\[\n\\boxed{\n\\frac{v_o}{v_s}\n=\n\\frac{g_m+1/r_o}{1/R_D+1/r_o}\n}\n\\]\n\nor equivalently,\n\n\\[\n\\frac{v_o}{v_s}\n=\n\\left(g_m+\\frac1{r_o}\\right)(R_D\\parallel r_o).\n\\]\n\nUsually \\(r_o\\gg R_D\\), so\n\n\\[\n\\boxed{A_v\\approx +g_mR_D}.\n\\]\n\nIf body effect is important, replace \\(g_m\\) by \\(g_m+g_{mb}\\).\n\n## 3. Input and output resistance\n\nLooking into the source,\n\n\\[\nR_{\\text{in}}\n=\n\\frac{R_D+r_o}{1+g_mr_o}\n\\approx \\frac1{g_m}.\n\\]\n\nThus, a common-gate amplifier has a relatively **low input resistance**.\n\nLooking into the drain, with the input voltage set to zero,\n\n\\[\n\\boxed{R_{\\text{out}}\\approx R_D\\parallel r_o}.\n\\]\n\nIf a load \\(R_L\\) is connected to the output, use \\(R_D\\parallel R_L\\) in the gain expressions.\n\n## 4. Effect of \\(C_1\\)\n\nThe coupling capacitor produces a high-pass response. If the voltage source is ideal and the resistance seen looking into the source is \\(R_{\\text{in}}\\),\n\n\\[\n\\frac{v_s}{v_{\\text{in}}}\n=\n\\frac{j\\omega C_1R_{\\text{in}}}\n{1+j\\omega C_1R_{\\text{in}}}.\n\\]\n\nTherefore,\n\n\\[\n\\frac{v_o}{v_{\\text{in}}}\n=\nA_v\n\\frac{j\\omega C_1R_{\\text{in}}}\n{1+j\\omega C_1R_{\\text{in}}}.\n\\]\n\nThe lower cutoff frequency is approximately\n\n\\[\n\\boxed{\nf_L=\\frac{1}{2\\pi C_1R_{\\text{in}}}\n}.\n\\]\n\nAt midband, \\(C_1\\) acts as a short circuit, so \\(v_s\\approx v_{\\text{in}}\\).\n\n## Important observation about the drawing\n\nAs drawn, the source node connected to \\(C_1\\) also appears to be connected directly to ground. If that connection is an actual ideal wire, then\n\n\\[\nv_s=0\n\\]\n\nfor all ac signals. Consequently,\n\n\\[\nv_{gs}=0,\\qquad \\Delta i_D=0,\\qquad v_o=0,\n\\]\n\nso the circuit has **zero voltage gain**; \\(C_1\\) merely drives an ac ground.\n\nFor the usual common-gate amplifier operation, the source should be connected to a bias element with finite small-signal impedance—not directly shorted to ground.",
        "format": "markdown",
        "sha256": "40c0b45d68eb1e29808bda7f2cdba7d96ab7d169f7f77d5676911c89ecde5bf4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer explicitly notices that the source is directly shorted to ground and concludes that the input is shorted, giving ideally zero voltage gain, as required for full credit.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 24342,
        "total_tokens": 26079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 24342,
        "total_tokens": 26079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an nMOS transistor and \\(V_b\\) is an ideal dc gate-bias voltage.\n\n## 1. DC operation\n\nAt dc, \\(C_1\\) is open, so \\(V_{in}\\) has no effect on the bias point. From the drawing, the source of \\(M_1\\) is directly grounded:\n\n\\[\nV_S=0,\\qquad V_{GS}=V_b.\n\\]\n\nIf \\(V_b\\le V_T\\), the transistor is off:\n\n\\[\nI_D=0,\\qquad V_{out,Q}=V_{DD}.\n\\]\n\nIf \\(V_b>V_T\\) and \\(M_1\\) is in saturation,\n\n\\[\nI_D \\simeq \\frac{1}{2}k_n(V_b-V_T)^2,\n\\]\n\nwhere \\(k_n=\\mu_n C_{\\rm ox}(W/L)\\). The output dc voltage is\n\n\\[\nV_{out,Q}=V_{DD}-I_D R_D.\n\\]\n\nThe saturation condition is\n\n\\[\nV_{out,Q}\\ge V_{GS}-V_T=V_b-V_T.\n\\]\n\n## 2. Small-signal operation of the circuit as drawn\n\nFor small signal, \\(V_{DD}\\) and the ideal bias voltage \\(V_b\\) are ac grounds. Also, the source is already connected directly to ground. Therefore,\n\n\\[\nv_g=0,\\qquad v_s=0,\n\\]\n\nand hence\n\n\\[\nv_{gs}=v_g-v_s=0.\n\\]\n\nThus the transistor current does not change in response to \\(v_{in}\\):\n\n\\[\ni_d=g_m v_{gs}=0.\n\\]\n\nThe right side of \\(C_1\\) is also grounded, so the input signal is simply applied through \\(C_1\\) to ground. Consequently,\n\n\\[\n\\boxed{\\frac{v_{out}}{v_{in}}=0}\n\\]\n\nfor the ideal circuit shown. The output remains at its quiescent value \\(V_{out,Q}\\), apart from any neglected parasitic feedthrough.\n\nThe input sees approximately\n\n\\[\nZ_{in}=\\frac{1}{sC_1},\n\\]\n\nand the small-signal resistance looking into the drain is approximately\n\n\\[\nR_{out}=R_D\\parallel r_o.\n\\]\n\n## 3. Likely intended circuit: common-gate amplifier\n\nThe arrangement of \\(R_D\\), \\(M_1\\), \\(V_b\\), and \\(C_1\\) suggests a common-gate amplifier: the gate is fixed at \\(V_b\\), and the input is intended to drive the source. For that circuit, the source must **not** be hard-wired to ground; it needs a bias element such as a current source or a sufficiently large resistor.\n\nWith the source driven by a small-signal voltage \\(v_s\\),\n\n\\[\n\\frac{v_{out}}{v_s}\n\\simeq +(g_m+g_{mb})(R_D\\parallel r_o),\n\\]\n\nor, neglecting body effect and channel-length modulation,\n\n\\[\n\\boxed{A_v\\simeq +g_mR_D}.\n\\]\n\nThe gain is positive, so the common-gate stage is noninverting. Its input resistance is low:\n\n\\[\nR_{in}\\simeq \\frac{1}{g_m+g_{mb}}\n\\approx \\frac{1}{g_m}.\n\\]\n\nWith a source resistance \\(R_{\\rm sig}\\), the coupling capacitor produces the high-pass response\n\n\\[\n\\frac{v_{out}}{v_{\\rm sig}}\n\\simeq A_v\n\\frac{sC_1R_{in}}\n{1+sC_1(R_{\\rm sig}+R_{in})}.\n\\]\n\nThus, the circuit as literally drawn has zero signal gain; the usual common-gate gain applies only if the direct source-to-ground connection is replaced by an appropriate bias network.",
        "format": "markdown",
        "sha256": "29b89cc5e6b645900fe6cf7aacb60374ce4bf0c87930e7b6d9d8b05b518b9f08"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly notices that the source is hard-shorted to ground, so the input is shunted and the ideal gain from Vin is zero. The optional common-gate discussion is clearly distinguished from the circuit as drawn.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 18966,
        "total_tokens": 20703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 18966,
        "total_tokens": 20703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an NMOS and \\(V_b\\) is an ideal dc gate bias. There is an important wiring issue in the drawing: the node connected to \\(C_1\\) appears to be directly connected to ground. The result depends on whether that connection is intentional.\n\n## 1. Literal interpretation of the drawing\n\nThe source of \\(M_1\\) is grounded, and the gate is held at \\(V_b\\).\n\nAt dc, \\(C_1\\) is open, so\n\n\\[\nV_{GS}=V_b,\\qquad V_S=0\n\\]\n\nand, if \\(M_1\\) operates in saturation,\n\n\\[\nI_D\\simeq \\frac{1}{2}k_n(V_b-V_T)^2\n\\]\n\nwhere \\(k_n=\\mu_n C_{\\mathrm{ox}}(W/L)\\). The output dc voltage is\n\n\\[\nV_{out,Q}=V_{DD}-I_D R_D .\n\\]\n\nSaturation requires\n\n\\[\nV_{out,Q}\\ge V_b-V_T.\n\\]\n\nFor small signals, the source is at ac ground and the gate voltage is fixed. Thus\n\n\\[\nv_{gs}=0,\n\\]\n\nso the input signal applied through \\(C_1\\) cannot modulate \\(M_1\\). Therefore,\n\n\\[\n\\boxed{\\frac{v_{out}}{v_{in}}=0}\n\\]\n\nfor the circuit exactly as drawn. The capacitor merely connects the input source to ground; it does not drive the transistor.\n\nThe small-signal output resistance is approximately\n\n\\[\nR_{out}=R_D\\parallel r_o.\n\\]\n\n## 2. Likely intended circuit: common-gate amplifier\n\nIf the ground connection below the \\(C_1\\)-\\(M_1\\) node is not intended, then the circuit is the usual common-gate amplifier:\n\n- gate fixed at \\(V_b\\), hence ac grounded;\n- input applied to the source through \\(C_1\\);\n- output taken at the drain.\n\nLet\n\n\\[\nR_X=R_D\\parallel R_L\n\\]\n\nwhere \\(R_L\\) may be omitted if no load is connected, and let \\(g_o=1/r_o\\).\n\nThe small-signal drain-node equation is\n\n\\[\n\\frac{v_o}{R_X}+g_o(v_o-v_s)-g_m v_s=0.\n\\]\n\nConsequently,\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_s}\n=(g_m+g_o)(R_X\\parallel r_o)\n}\n\\]\n\nand, neglecting channel-length modulation,\n\n\\[\n\\boxed{A_v\\simeq +g_m R_D}.\n\\]\n\nThe gain is positive, unlike the common-source amplifier.\n\nThe input resistance looking into the source is\n\n\\[\n\\boxed{\nR_{in,s}\n=\\frac{1+g_oR_X}{g_m+g_o}\n=\\frac{r_o+R_X}{1+g_mr_o}\n}\n\\]\n\nor approximately\n\n\\[\n\\boxed{R_{in,s}\\simeq \\frac{1}{g_m}}.\n\\]\n\nIf body effect is included, replace \\(g_m\\) by \\(g_m+g_{mb}\\):\n\n\\[\nA_v\\simeq (g_m+g_{mb})(R_D\\parallel r_o)\n\\]\n\nand\n\n\\[\nR_{in,s}\\simeq \\frac{1}{g_m+g_{mb}}.\n\\]\n\nWith an ideal input source and \\(C_1\\), the coupling-capacitor transfer is\n\n\\[\n\\frac{v_s}{v_{in}}\n=\n\\frac{j\\omega C_1R_{in,s}}\n{1+j\\omega C_1R_{in,s}}.\n\\]\n\nThus the complete midband-to-low-frequency gain is\n\n\\[\n\\boxed{\n\\frac{v_o}{v_{in}}\n=\nA_v\n\\frac{j\\omega C_1R_{in,s}}\n{1+j\\omega C_1R_{in,s}}\n}\n\\]\n\nwith lower cutoff frequency\n\n\\[\n\\boxed{\nf_L\\simeq \\frac{1}{2\\pi C_1R_{in,s}}.\n}\n\\]\n\nSo, if the intended topology is common-gate, the key results are\n\n\\[\n\\boxed{A_v\\simeq +g_mR_D,\\qquad\nR_{in}\\simeq \\frac1{g_m},\\qquad\nR_{out}\\simeq R_D\\parallel r_o.}\n\\]",
        "format": "markdown",
        "sha256": "23450c3651e7697bf6727f9e1bfa976d2c61a58c602d9f9347b2a8299d2ee79f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer identifies that the source/input node is shorted to ground and correctly concludes that the literal circuit has ideally zero gain from Vin. The additional hypothetical common-gate analysis does not contradict that conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 18060,
        "total_tokens": 19797,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 18060,
        "total_tokens": 19797,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two finite poles**.\n\nThe independent dynamic nodes are:\n\n1. The gate node, involving \\(C_{GS}\\) and \\(C_{GD}\\)\n2. The drain/output node, involving \\(C_{DB}\\) and \\(C_{GD}\\)\n\nThe source, bulk, and \\(V_{DD}\\) are at ac ground, so \\(C_{SB}\\) does not introduce an additional pole. \\(C_{GD}\\) couples the two nodes but does not create a third independent pole.",
        "format": "markdown",
        "sha256": "1706f4baf1c60bad5650196f6ac3f4498d842ec18a1e1aabafbc1aa07928252d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and explains that CSB is inactive because both terminals are at AC ground; CGD couples the two dynamic nodes without adding a third independent pole.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 3218,
        "total_tokens": 5190,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 3218,
        "total_tokens": 5190,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**.\n\nReason: \\(V_{DD}\\) and the MOSFET source are AC grounds, leaving two independent dynamic nodes—the **gate** and **drain**. The capacitors \\(C_{GS}\\), \\(C_{GD}\\), and \\(C_{DB}\\) therefore form a second-order network. \\(C_{SB}\\) is across ground and does not introduce an additional pole.",
        "format": "markdown",
        "sha256": "3a2ad17a5dc09450b05123de7266cfd04c90fabc6962b82558aebfa64c7d851a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and explains that C_SB is across AC ground and adds no dynamic state; the remaining capacitors form a second-order network.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 4235,
        "total_tokens": 6207,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 4235,
        "total_tokens": 6207,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**.\n\nIn the small-signal circuit, \\(V_{DD}\\) and the source/body are at ac ground, leaving two independent dynamic nodes:\n\n1. The gate node, involving \\(C_{GS}\\) and \\(C_{GD}\\)\n2. The drain/output node, involving \\(C_{DB}\\) and \\(C_{GD}\\)\n\nThus, the natural-response characteristic equation is second order. \\(C_{SB}\\) does not introduce another pole because the source and body are grounded.",
        "format": "markdown",
        "sha256": "c02921c25555455914d50ecab8b047146398efca81270367b235b618a6a9f418"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and accounts for the capacitors, including that CSB has both terminals at AC ground and adds no pole.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 4255,
        "total_tokens": 6227,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 4255,
        "total_tokens": 6227,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an NMOS operating in saturation, with gate current neglected and no external load connected to \\(V_{\\text{out}}\\).\n\nDefine\n\n\\[\nR_{\\Sigma}=R_1+R_2,\\qquad \n\\alpha=\\frac{R_2}{R_1+R_2}.\n\\]\n\nThe circuit is a **common-gate amplifier with voltage feedback**: the input is applied to the source, while a fraction of the output is fed back to the gate.\n\n## DC bias\n\nSince the MOS gate draws no current,\n\n\\[\nV_F=V_G=\\alpha V_D ,\n\\]\n\nwhere \\(V_D=V_{\\text{out,DC}}\\). The divider also loads the drain, so\n\n\\[\n\\frac{V_{DD}-V_D}{R_D}\n=\nI_D+\\frac{V_D}{R_{\\Sigma}}.\n\\]\n\nIf the source dc voltage is \\(V_S\\), then\n\n\\[\nV_{GS}=\\alpha V_D-V_S.\n\\]\n\nFor saturation,\n\n\\[\nI_D=\\frac{1}{2}\\beta_n\n\\left(\\alpha V_D-V_S-V_T\\right)^2\n\\]\n\nand the operating point is obtained from these two equations, subject to\n\n\\[\nV_{GS}>V_T,\\qquad\nV_{DS}\\ge V_{GS}-V_T.\n\\]\n\nIf \\(V_{in}\\) has no dc component, then \\(V_S=0\\).\n\n## Small-signal voltage gain\n\nFor small signals, \\(V_{DD}\\) is ac ground. The feedback divider gives\n\n\\[\nv_g=v_f=\\alpha v_o.\n\\]\n\nThus,\n\n\\[\nv_{gs}=v_g-v_i=\\alpha v_o-v_i.\n\\]\n\nThe divider appears as a load \\(R_{\\Sigma}\\) at the output. Let\n\n\\[\nR_X=R_D\\parallel R_{\\Sigma}.\n\\]\n\nUsing \\(i_d=g_m v_{gs}\\), the drain-node equation is\n\n\\[\n\\frac{v_o}{R_D}\n+\\frac{v_o-v_g}{R_1}\n+g_m(v_g-v_i)=0.\n\\]\n\nSubstituting \\(v_g=\\alpha v_o\\),\n\n\\[\n\\left(\\frac{1}{R_D}+\\frac{1}{R_{\\Sigma}}+\\alpha g_m\\right)v_o\n=g_m v_i.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\n=\n\\frac{g_mR_X}{1+\\alpha g_mR_X}\n}\n\\]\n\nor explicitly,\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m}\n{\\dfrac{1}{R_D}+\\dfrac{1}{R_1+R_2}\n+g_m\\dfrac{R_2}{R_1+R_2}}\n}.\n\\]\n\nThe gain is **positive**, as expected for a common-gate stage.\n\nIf \\(R_1+R_2\\gg R_D\\), the loading of the feedback divider can be neglected:\n\n\\[\nA_v\\simeq\n\\frac{g_mR_D}\n{1+g_mR_D\\dfrac{R_2}{R_1+R_2}}.\n\\]\n\nFor large loop gain,\n\n\\[\ng_mR_X\\alpha\\gg 1,\n\\]\n\nthe gain approaches\n\n\\[\n\\boxed{\nA_v\\rightarrow \\frac{1}{\\alpha}\n=\\frac{R_1+R_2}{R_2}\n=1+\\frac{R_1}{R_2}\n}.\n\\]\n\n## Input and output resistance\n\nNeglecting \\(r_o\\), the input current is\n\n\\[\ni_i=g_m(v_i-v_g).\n\\]\n\nHence the input resistance looking into the source is\n\n\\[\n\\boxed{\nR_{\\text{in}}\n=\n\\frac{1}{g_m}+\\alpha R_X\n=\n\\frac{1+g_m\\alpha R_X}{g_m}\n}.\n\\]\n\nWith the input voltage set to zero, the output resistance is\n\n\\[\n\\boxed{\nR_{\\text{out}}\n=\n\\frac{R_X}{1+g_m\\alpha R_X}\n}.\n\\]\n\nThus, the feedback increases the input resistance and reduces the output resistance.\n\nIf transistor output resistance \\(r_o\\) is included, with \\(g_o=1/r_o\\),\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m+g_o}\n{\\dfrac{1}{R_X}+g_o+\\alpha g_m}\n}.\n\\]\n\nThe small-signal results are valid only while \\(M_1\\) remains in saturation.",
        "format": "markdown",
        "sha256": "a503954b45c6a27ab4c74ab616538284d777e3984e84403b61fe38a57c2bba72"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input and output-divider feedback to the gate, and derives the correct positive closed-loop gain with negative feedback. The extra bias and resistance discussion does not undermine the essential analysis.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 34697,
        "total_tokens": 36296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33716,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 34697,
        "total_tokens": 36296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33716,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an n-channel MOSFET operated in saturation, with negligible gate current and body effect. The input is applied at the source, so this is a **common-gate amplifier with voltage feedback**.\n\nLet\n\n\\[\nR_\\Sigma=R_1+R_2,\\qquad \n\\beta=\\frac{R_2}{R_1+R_2}.\n\\]\n\nHere \\(\\beta\\) is the feedback factor.\n\n## 1. DC bias\n\nSince the MOSFET gate draws no dc current, \\(R_1\\) and \\(R_2\\) form a divider from the drain/output node to ground:\n\n\\[\nV_F=\\beta V_O .\n\\]\n\nThe output node is loaded by \\(R_\\Sigma\\), so\n\n\\[\n\\frac{V_{DD}-V_O}{R_D}\n=\nI_D+\\frac{V_O}{R_\\Sigma}.\n\\]\n\nEquivalently,\n\n\\[\nV_O=V_{\\text{TH}}-I_D R_{\\text{TH}},\n\\]\n\nwhere\n\n\\[\nV_{\\text{TH}}=V_{DD}\\frac{R_\\Sigma}{R_D+R_\\Sigma},\n\\qquad\nR_{\\text{TH}}=R_D\\parallel R_\\Sigma.\n\\]\n\nIf the source dc voltage is \\(V_S\\), then\n\n\\[\nV_{GS}=V_F-V_S=\\beta V_O-V_S.\n\\]\n\nFor operation in saturation,\n\n\\[\nI_D=\\frac{k_n}{2}\n\\left(\\beta V_O-V_S-V_T\\right)^2,\n\\]\n\nwith the conditions\n\n\\[\n\\beta V_O>V_S+V_T,\n\\]\n\nand\n\n\\[\nV_O-V_S\\geq V_{GS}-V_T.\n\\]\n\nThese equations determine the dc operating point. If \\(R_1+R_2\\gg R_D\\), the divider loading can often be neglected, giving approximately \\(V_O\\simeq V_{DD}-I_D R_D\\).\n\n---\n\n## 2. Small-signal operation\n\nFor ac signals, \\(V_{DD}\\) is ground. Since the gate current is zero,\n\n\\[\n\\frac{v_F-v_o}{R_1}+\\frac{v_F}{R_2}=0,\n\\]\n\nso\n\n\\[\nv_F=\\beta v_o.\n\\]\n\nThe small-signal gate-source voltage is therefore\n\n\\[\nv_{gs}=v_F-v_i=\\beta v_o-v_i.\n\\]\n\nThe \\(R_1\\)-\\(R_2\\) network appears as a resistance \\(R_\\Sigma\\) from the output to ground. Define\n\n\\[\nG_X=\\frac{1}{R_D}+\\frac{1}{R_\\Sigma},\n\\qquad\nR_X=R_D\\parallel R_\\Sigma.\n\\]\n\nIncluding the MOSFET output resistance \\(r_o\\), with \\(g_o=1/r_o\\), the output-node equation is\n\n\\[\n\\left(G_X+g_o+\\beta g_m\\right)v_o\n=\n(g_m+g_o)v_i.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\n=\n\\frac{g_m+g_o}\n{G_X+g_o+\\beta g_m}\n}\n\\]\n\nor, explicitly,\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m+g_o}\n{\\dfrac1{R_D}+\\dfrac1{R_1+R_2}+g_o+\ng_m\\dfrac{R_2}{R_1+R_2}}\n}.\n\\]\n\nNeglecting \\(r_o\\),\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_mR_X}{1+\\beta g_mR_X}\n}\n\\]\n\nwith \\(R_X=R_D\\parallel(R_1+R_2)\\).\n\nIf the divider loading is negligible,\n\n\\[\n\\boxed{\nA_v\\approx\n\\frac{g_mR_D}\n{1+g_mR_D\\dfrac{R_2}{R_1+R_2}}\n}.\n\\]\n\nThe gain is positive because the stage is common-gate. For large loop gain,\n\n\\[\ng_mR_X\\beta\\gg 1,\n\\]\n\nthe gain approaches\n\n\\[\n\\boxed{\nA_v\\approx\\frac1\\beta\n=\n\\frac{R_1+R_2}{R_2}\n=\n1+\\frac{R_1}{R_2}\n}.\n\\]\n\nThus, the resistor ratio sets the closed-loop gain.\n\n---\n\n## 3. Input and output resistances\n\nWith \\(r_o\\) neglected,\n\n\\[\n\\boxed{\nR_{\\text{in}}\\approx \\frac1{g_m}+\\beta R_X\n}\n\\]\n\nand, with the input voltage set to zero,\n\n\\[\n\\boxed{\nR_{\\text{out}}\\approx\n\\frac{R_X}{1+\\beta g_mR_X}\n}.\n\\]\n\nHence, the feedback increases the normally low common-gate input resistance and reduces the output resistance.",
        "format": "markdown",
        "sha256": "13cc24f8a0581723f81868b4a395eb329ef96694fc0b101d24a8f32782699006"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input and output-divider feedback to the gate, and derives the correct positive closed-loop gain, which reflects negative feedback. The additional bias and resistance analysis is consistent with the topology.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 24373,
        "total_tokens": 25972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 24373,
        "total_tokens": 25972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an NMOS operating in saturation, with negligible gate current and no external load connected to \\(V_{\\text{out}}\\).\n\nDefine\n\n\\[\nR_{12}=R_1+R_2,\\qquad \n\\beta=\\frac{R_2}{R_1+R_2}.\n\\]\n\nSince the MOSFET gate draws no current,\n\n\\[\nV_F=V_G=\\beta V_D=\\beta V_{\\text{out}}.\n\\]\n\nThus, the circuit is a **common-gate NMOS amplifier with resistive voltage feedback** from the drain to the gate.\n\n## DC bias\n\nThe \\(R_1-R_2\\) divider also loads the drain. Therefore,\n\n\\[\n\\frac{V_{DD}-V_D}{R_D}\n=\nI_D+\\frac{V_D}{R_{12}}.\n\\]\n\nLet\n\n\\[\nR_P=R_D\\parallel R_{12},\n\\qquad\nV_{D,\\text{off}}=\nV_{DD}\\frac{R_{12}}{R_D+R_{12}}.\n\\]\n\nThen\n\n\\[\nV_D=V_{D,\\text{off}}-I_D R_P,\n\\]\n\nand\n\n\\[\nV_G=\\beta V_D,\\qquad V_S=V_{in,Q}.\n\\]\n\nHence,\n\n\\[\nV_{GS}=\\beta V_D-V_{in,Q}.\n\\]\n\nUsing the square-law model, neglecting channel-length modulation,\n\n\\[\nI_D=\\frac{1}{2}k_n\n\\left(\\beta V_D-V_{in,Q}-V_T\\right)^2.\n\\]\n\nEquivalently,\n\n\\[\nI_D=\\frac{1}{2}k_n\n\\left[\n\\beta\\left(V_{D,\\text{off}}-I_D R_P\\right)\n-V_{in,Q}-V_T\n\\right]^2.\n\\]\n\nThe transistor is on if \\(V_{GS}>V_T\\), and saturation requires\n\n\\[\nV_D-V_S\\geq V_{GS}-V_T.\n\\]\n\nFor the usual case \\(0<\\beta<1\\) and positive \\(V_D\\), an on-device is normally in saturation.\n\n## Small-signal voltage gain\n\nFor small-signal analysis, \\(V_{DD}\\) is ac ground. Also,\n\n\\[\nv_g=\\beta v_o,\\qquad v_s=v_i.\n\\]\n\nThe divider appears as a resistance \\(R_{12}\\) from the output to ground. Including \\(r_o\\), the drain-node KCL is\n\n\\[\n\\left(\n\\frac{1}{R_D}+\\frac{1}{R_{12}}+g_o+\\beta g_m\n\\right)v_o\n=\n(g_m+g_o)v_i,\n\\]\n\nwhere \\(g_o=1/r_o\\). Thus,\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\n=\n\\frac{g_m+g_o}\n{\\dfrac{1}{R_D}+\\dfrac{1}{R_{12}}+g_o+\\beta g_m}\n}\n\\]\n\nor, with\n\n\\[\nR_X=R_D\\parallel R_{12}\\parallel r_o,\n\\]\n\n\\[\n\\boxed{\nA_v=\n\\frac{(g_m+g_o)R_X}\n{1+\\beta g_mR_X}\n}.\n\\]\n\nNeglecting \\(r_o\\),\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m(R_D\\parallel R_{12})}\n{1+\\beta g_m(R_D\\parallel R_{12})}\n}.\n\\]\n\nIf the divider resistors are large compared with \\(R_D\\), then \\(R_D\\parallel R_{12}\\approx R_D\\), giving\n\n\\[\n\\boxed{\nA_v\\approx\n\\frac{g_mR_D}\n{1+\\dfrac{R_2}{R_1+R_2}g_mR_D}\n}.\n\\]\n\nThe gain is **positive**: an increase in source voltage reduces \\(V_{GS}\\), reduces drain current, and raises the drain voltage.\n\nFor large loop gain,\n\n\\[\ng_m(R_D\\parallel R_{12})\\beta\\gg 1,\n\\]\n\nthe gain approaches\n\n\\[\nA_v\\rightarrow \\frac{1}{\\beta}\n=\\frac{R_1+R_2}{R_2}\n=1+\\frac{R_1}{R_2}.\n\\]\n\n## Input and output resistances\n\nWith the input source ideal and \\(r_o\\) neglected,\n\n\\[\n\\boxed{\nR_{\\text{in}}\\approx\n\\frac{1}{g_m}+\\beta(R_D\\parallel R_{12})\n}\n\\]\n\nand, with the input set to ac ground,\n\n\\[\n\\boxed{\nR_{\\text{out}}\\approx\n\\frac{R_D\\parallel R_{12}}\n{1+\\beta g_m(R_D\\parallel R_{12})}\n}.\n\\]\n\nThus, the feedback increases the input resistance and reduces the output resistance, as expected for voltage-series negative feedback.",
        "format": "markdown",
        "sha256": "a1ea45a71ae9f02bb1c251b2f59b61df2b72a0f8e83da7c1ec31e3339ed6697c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source as the input, the output divider as feedback to the gate, and the resulting negative feedback. The positive closed-loop gain expression is correct and approaches 1/β at high loop gain.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 34930,
        "total_tokens": 36529,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33863,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 34930,
        "total_tokens": 36529,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33863,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume the two devices are enhancement nMOS transistors, with \\(V_{DD}\\) and \\(V_b\\) ideal bias voltages. The source of \\(M_1\\) is connected to the output node.\n\n### 1. Function of the circuit\n\n- \\(M_1\\) is connected as a **common-drain amplifier**, or **source follower**.\n- \\(M_2\\) is a biased nMOS current sink.\n- \\(V_b\\) sets the current through \\(M_2\\), while \\(M_1\\) adjusts \\(V_{out}\\) so that the two drain currents are equal.\n\nThe dc terminal voltages are\n\n\\[\nV_{GS1}=V_{in}-V_{out}, \\qquad V_{DS1}=V_{DD}-V_{out}\n\\]\n\nand\n\n\\[\nV_{GS2}=V_b,\\qquad V_{DS2}=V_{out}.\n\\]\n\n---\n\n### 2. DC operating point\n\nLet\n\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}\\left(\\frac WL\\right)_i.\n\\]\n\nIf both transistors operate in saturation and channel-length modulation is neglected,\n\n\\[\nI_Q=I_{D2}=\\frac{1}{2}\\beta_2(V_b-V_{T2})^2\n\\]\n\nand\n\n\\[\nI_Q=I_{D1}\n=\\frac{1}{2}\\beta_1(V_{in,Q}-V_{out,Q}-V_{T1})^2.\n\\]\n\nTherefore,\n\n\\[\nV_{out,Q}\n=V_{in,Q}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{T2}).\n\\]\n\nEquivalently,\n\n\\[\nV_{out,Q}=V_{in,Q}-V_{GS1,Q}.\n\\]\n\nThus the output is approximately the input voltage shifted downward by the \\(V_{GS}\\) required to make \\(M_1\\) conduct the bias current.\n\nThe saturation conditions are\n\n\\[\nV_{DD}-V_{out,Q}\\ge V_{GS1,Q}-V_{T1}\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nV_{out,Q}\\ge V_b-V_{T2}\n\\]\n\nfor \\(M_2\\). The second condition is the compliance requirement for the current sink.\n\nIncluding channel-length modulation, the operating point is found from\n\n\\[\n\\frac{\\beta_1}{2}(V_{in,Q}-V_{out,Q}-V_{T1})^2\n\\left[1+\\lambda_1(V_{DD}-V_{out,Q})\\right]\n\\]\n\n\\[\n=\n\\frac{\\beta_2}{2}(V_b-V_{T2})^2\n\\left(1+\\lambda_2V_{out,Q}\\right).\n\\]\n\n---\n\n### 3. Small-signal voltage gain\n\nFor small signals, \\(V_{DD}\\) and \\(V_b\\) are ac ground. Define\n\n\\[\ng_{m1}=\\frac{2I_Q}{V_{OV1}},\\qquad\ng_{oi}=\\frac{1}{r_{oi}}.\n\\]\n\nIgnoring body effect, the small-signal KCL at the output node is\n\n\\[\ng_{m1}(v_i-v_o)=(g_{o1}+g_{o2})v_o.\n\\]\n\nHence,\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\n=\\frac{g_{m1}}\n{g_{m1}+g_{o1}+g_{o2}}\n}\n\\]\n\nor, equivalently,\n\n\\[\nA_v=\n\\frac{g_{m1}(r_{o1}\\parallel r_{o2})}\n{1+g_{m1}(r_{o1}\\parallel r_{o2})}.\n\\]\n\nIf the transistors have large output resistances,\n\n\\[\n\\boxed{A_v\\approx 1}\n\\]\n\nso the circuit is a voltage buffer with no phase inversion.\n\nIf body effect in \\(M_1\\) is included, the gain becomes\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}\n\\]\n\nwhich is slightly less than unity.\n\n---\n\n### 4. Output resistance\n\nWith the input ac-grounded,\n\n\\[\n\\boxed{\nR_{out}\n=\n\\frac{1}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}\n\\]\n\nand, neglecting body effect and channel-length modulation,\n\n\\[\nR_{out}\\approx \\frac{1}{g_{m1}}.\n\\]\n\nThe input resistance is ideally very high because the MOS gate draws essentially no current.\n\n### Overall result\n\nThis is an **nMOS source follower biased by an nMOS current sink**:\n\n- high input resistance,\n- low output resistance,\n- voltage gain close to \\(+1\\),\n- \\(V_b\\) determines the bias current and therefore the value of \\(g_{m1}\\),\n- output swing is limited approximately by\n\n\\[\nV_b-V_{T2}\\lesssim V_{out}\\lesssim V_{DD}-V_{OV1}.\n\\]",
        "format": "markdown",
        "sha256": "0d0e8f70c21e7be3479a565a78ecf4b53e98aa18b3abb48a0e8187c7c5afb8b3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with its source at the output and M2 as an NMOS current sink. It gives a positive gain near unity, with body effect reducing it slightly below one, consistent with the full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 18728,
        "total_tokens": 19952,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 18728,
        "total_tokens": 19952,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are n-channel MOSFETs, the output is unloaded, and initially neglect channel-length modulation and body effect.\n\nThis is an **NMOS source follower** \\(M_1\\) biased by an NMOS current sink \\(M_2\\).\n\n## 1. DC operation\n\nThe transistor voltages are\n\n\\[\nV_{GS1}=V_{\\mathrm{in}}-V_{\\mathrm{out}},\\qquad\nV_{DS1}=V_{DD}-V_{\\mathrm{out}}\n\\]\n\nand\n\n\\[\nV_{GS2}=V_b,\\qquad\nV_{DS2}=V_{\\mathrm{out}}.\n\\]\n\nWith no external dc load,\n\n\\[\nI_{D1}=I_{D2}.\n\\]\n\nLet\n\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}\\left(\\frac WL\\right)_i.\n\\]\n\nFor \\(M_2\\) to act as a current sink, it must be in saturation:\n\n\\[\nV_b>V_{T2},\\qquad\nV_{\\mathrm{out}}\\ge V_b-V_{T2}.\n\\]\n\nIts current is then\n\n\\[\nI_{D2}=\\frac{1}{2}\\beta_2(V_b-V_{T2})^2.\n\\]\n\nIf \\(M_1\\) is also in saturation,\n\n\\[\nI_{D1}=\\frac{1}{2}\\beta_1\n\\left(V_{\\mathrm{in}}-V_{\\mathrm{out}}-V_{T1}\\right)^2.\n\\]\n\nEquating the two currents gives\n\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=\nV_{\\mathrm{in}}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,\n(V_b-V_{T2})\n}\n\\]\n\nor, defining the bias current \\(I_B=I_{D2}\\),\n\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=\nV_{\\mathrm{in}}-V_{T1}\n-\\sqrt{\\frac{2I_B}{\\beta_1}}\n}.\n\\]\n\nThus, \\(M_1\\) behaves as a source follower: the output follows the input with a dc level shift equal to \\(V_{GS1}\\).\n\n## 2. Saturation conditions\n\nFor \\(M_1\\),\n\n\\[\nV_{DS1}\\ge V_{GS1}-V_{T1}\n\\]\n\nwhich reduces to\n\n\\[\nV_{\\mathrm{in}}\\le V_{DD}+V_{T1}.\n\\]\n\nFor \\(M_2\\),\n\n\\[\nV_{\\mathrm{out}}\\ge V_b-V_{T2}.\n\\]\n\nUsing the dc result, the latter condition becomes\n\n\\[\nV_{\\mathrm{in}}\n\\ge\nV_{T1}\n+\n\\left(1+\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\right)\n(V_b-V_{T2}).\n\\]\n\nTherefore, with both transistors saturated,\n\n\\[\n\\boxed{\nV_{T1}\n+\n\\left(1+\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\right)\n(V_b-V_{T2})\n\\le V_{\\mathrm{in}}\n\\le V_{DD}+V_{T1}\n}.\n\\]\n\nThe corresponding output swing is approximately\n\n\\[\nV_b-V_{T2}\n\\le V_{\\mathrm{out}}\n\\le\nV_{DD}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}(V_b-V_{T2}).\n\\]\n\nIf \\(V_{\\mathrm{out}}<V_b-V_{T2}\\), \\(M_2\\) enters the triode region and no longer behaves as an ideal current source. In that case,\n\n\\[\nI_{D2}=\n\\beta_2\\left[\n(V_b-V_{T2})V_{\\mathrm{out}}\n-\\frac{V_{\\mathrm{out}}^2}{2}\n\\right].\n\\]\n\nIf \\(V_{\\mathrm{in}}\\le V_{T1}\\), \\(M_1\\) is off and \\(M_2\\) pulls the output close to ground.\n\n## 3. Small-signal voltage gain\n\nFor a fixed bias voltage \\(V_b\\), the small-signal gate voltage of \\(M_2\\) is zero. Let\n\n\\[\ng_{m1}=\\beta_1(V_{GS1}-V_{T1}),\\qquad\ng_{oi}=\\frac{1}{r_{oi}}.\n\\]\n\nThe small-signal gain is\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=\n\\frac{g_{m1}}\n{g_{m1}+g_{o1}+g_{o2}}\n}\n\\]\n\nand, neglecting channel-length modulation,\n\n\\[\n\\boxed{A_v\\approx 1}.\n\\]\n\nThus the circuit is a **noninverting voltage follower** with nearly unity voltage gain.\n\nThe input resistance is ideally infinite, since the input is connected to the gate of \\(M_1\\). The output resistance is approximately\n\n\\[\n\\boxed{\nR_{\\mathrm{out}}\n=\n\\frac{1}{g_{m1}+g_{o1}+g_{o2}}\n\\approx \\frac{1}{g_{m1}}\n}\n\\]\n\nfor large transistor output resistances. If body effect is included, \\(g_{mb1}\\) is added to the denominator.",
        "format": "markdown",
        "sha256": "c48178b31bba1a4cb0ca24625bddbcc575428c0d0edb77f524809527c91eb6cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-sink load, with positive near-unity gain. The small-signal gain and output-resistance expressions are consistent with the golden solution under the stated assumptions.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 21877,
        "total_tokens": 23101,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20718,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 21877,
        "total_tokens": 23101,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20718,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are enhancement-mode NMOS devices, with \\(V_b\\) a fixed bias voltage.\n\n## 1. Circuit operation\n\n- \\(M_1\\) is connected as a **source follower**:\n  - drain at \\(V_{DD}\\)\n  - gate at \\(V_{in}\\)\n  - source at \\(V_{out}\\)\n- \\(M_2\\) is an NMOS **current-sink load**:\n  - gate at \\(V_b\\)\n  - source at ground\n  - drain at \\(V_{out}\\)\n\nThus, \\(M_2\\) establishes the bias current, while \\(M_1\\) causes the output to follow the input.\n\nLet\n\n\\[\n\\beta_i=\\mu_n C_{\\text{ox}}\\left(\\frac WL\\right)_i\n\\]\n\nand initially neglect channel-length modulation.\n\n## 2. DC operating point\n\nThe device voltages are\n\n\\[\nV_{GS1}=V_{in}-V_{out}, \\qquad V_{DS1}=V_{DD}-V_{out}\n\\]\n\n\\[\nV_{GS2}=V_b, \\qquad V_{DS2}=V_{out}.\n\\]\n\nIf \\(M_2\\) is in saturation,\n\n\\[\nI_Q=I_{D2}=\\frac12\\beta_2(V_b-V_{TN2})^2.\n\\]\n\nFor \\(M_1\\) to conduct the same current in saturation,\n\n\\[\nI_Q=\\frac12\\beta_1(V_{in}-V_{out}-V_{TN1})^2.\n\\]\n\nTherefore,\n\n\\[\nV_{in}-V_{out}-V_{TN1}\n=\n\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{TN2}),\n\\]\n\nor\n\n\\[\n\\boxed{\nV_{out}\n=\nV_{in}-V_{TN1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{TN2})\n}\n\\]\n\nHence, the output is approximately the input voltage shifted downward by the required \\(V_{GS1}\\):\n\n\\[\nV_{out}\\approx V_{in}-V_{GS1}.\n\\]\n\nThe bias current is\n\n\\[\n\\boxed{\nI_Q=\\frac12\\beta_2(V_b-V_{TN2})^2\n}\n\\]\n\nprovided \\(M_2\\) remains in saturation.\n\n## 3. Saturation conditions\n\nFor \\(M_2\\),\n\n\\[\nV_{DS2}\\ge V_{GS2}-V_{TN2}\n\\]\n\nso\n\n\\[\n\\boxed{V_{out}\\ge V_b-V_{TN2}}.\n\\]\n\nFor \\(M_1\\),\n\n\\[\nV_{DS1}\\ge V_{GS1}-V_{TN1},\n\\]\n\nor\n\n\\[\n\\boxed{V_{DD}-V_{out}\\ge V_{OV1}},\n\\]\n\nwhere \\(V_{OV1}=V_{GS1}-V_{TN1}\\).\n\nThus, for both devices to remain in saturation,\n\n\\[\n\\boxed{\nV_b-V_{TN2}\\le V_{out}\\le V_{DD}-V_{OV1}.\n}\n\\]\n\nThe lower limit is the compliance limit of the current sink \\(M_2\\). If \\(V_{out}\\) falls below this value, \\(M_2\\) enters the triode region and no longer behaves as an ideal current source.\n\nIf \\(V_{in}\\le V_{TN1}\\), \\(M_1\\) is off and \\(M_2\\) pulls the output approximately to ground.\n\n## 4. Small-signal voltage gain\n\nWith \\(V_{DD}\\) and \\(V_b\\) treated as ac grounds, the small-signal gain is\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_{m1}}\n{g_{m1}+g_{o1}+g_{o2}}\n}\n\\]\n\nwhen body effect is neglected.\n\nIncluding body effect in \\(M_1\\),\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}.\n\\]\n\nIf channel-length modulation and body effect are neglected,\n\n\\[\n\\boxed{A_v\\approx 1}.\n\\]\n\nThus, \\(M_1\\) provides a near-unity-gain voltage buffer.\n\n## 5. Output resistance\n\nLooking into the output with the input set to ac ground,\n\n\\[\n\\boxed{\nR_{out}\\approx\n\\frac{1}\n{g_{m1}+g_{o1}+g_{o2}}\n}\n\\]\n\nor, including body effect,\n\n\\[\n\\boxed{\nR_{out}\\approx\n\\frac{1}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}.\n\\]\n\nThe input resistance is ideally infinite because the MOS gate draws no current.\n\nOverall, this is an NMOS source follower biased by an NMOS current sink: it has high input resistance, low output resistance, and a voltage gain close to unity.",
        "format": "markdown",
        "sha256": "7f2b27a8c4410fda6644f7def5403ef275278769b2b18913485cb5e949a926aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-sink load, with a positive near-unity gain. The gain and output-resistance expressions also account appropriately for body effect and finite output resistance.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 13013,
        "total_tokens": 14237,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 13013,
        "total_tokens": 14237,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter**. \\(M_2\\) is the p-channel MOSFET forming the pull-up network, and \\(M_1\\) is the n-channel MOSFET forming the pull-down network.\n\nAssume the body of \\(M_2\\) is connected to \\(V_{DD}\\) and that of \\(M_1\\) to ground.\n\n\\[\nV_{GS1}=V_{in}, \\qquad V_{SG2}=V_{DD}-V_{in}\n\\]\n\nThus,\n\n- \\(M_1\\) turns on when \\(V_{in}>V_{TN}\\).\n- \\(M_2\\) turns on when \\(V_{in}<V_{DD}-|V_{TP}|\\).\n\n### DC operation\n\n| Input | \\(M_1\\) | \\(M_2\\) | Output |\n|---|---|---|---|\n| \\(V_{in}=0\\) | OFF | ON | \\(V_{out}\\approx V_{DD}\\) |\n| \\(V_{in}=V_{DD}\\) | ON | OFF | \\(V_{out}\\approx 0\\) |\n| Intermediate | Both partly ON | Both partly ON | Transition region |\n\nTherefore,\n\n\\[\n\\boxed{V_{out}\\approx \\overline{V_{in}}}\n\\]\n\nFor a low input, \\(M_2\\) charges the output node to \\(V_{DD}\\). For a high input, \\(M_1\\) discharges the output node to ground.\n\n### Voltage-transfer characteristic\n\nIgnoring leakage,\n\n\\[\nV_{out}\\simeq\n\\begin{cases}\nV_{DD}, & V_{in}<V_{TN}\\\\[2mm]\n\\text{rapid transition}, & V_{TN}<V_{in}<V_{DD}-|V_{TP}|\\\\[2mm]\n0, & V_{in}>V_{DD}-|V_{TP}|\n\\end{cases}\n\\]\n\nIn the transition region both transistors conduct, and the output is found from\n\n\\[\nI_{D1}=I_{D2}.\n\\]\n\nUsing the square-law saturation model, the nominal switching input \\(V_M\\) is obtained from\n\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{TP}|)^2,\n\\]\n\ngiving\n\n\\[\n\\boxed{\nV_M=\n\\frac{\\sqrt{\\beta_n}V_{TN}\n+\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n}\n\\]\n\nwhere \\(\\beta_n=\\mu_n C_{\\text{ox}}(W/L)_n\\) and similarly for \\(\\beta_p\\). For a symmetric inverter, \\(V_M\\) is approximately \\(V_{DD}/2\\).\n\nIn the steady logic states, one transistor is off, so the ideal static power dissipation is zero. During an input transition, both devices conduct briefly and the load capacitance is charged or discharged.",
        "format": "markdown",
        "sha256": "22a64ce567df1c84ae7c07b0c2b1d6c697a47f4a2f5b51a22f1cf49a0fc3b36b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up; the operating states and supplementary analysis are consistent with inverter operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 9461,
        "total_tokens": 9741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 9461,
        "total_tokens": 9741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter**. \\(M_2\\) is the p-channel MOSFET (pull-up) and \\(M_1\\) is the n-channel MOSFET (pull-down). Their gates are connected to \\(V_{in}\\), and their drains are connected to \\(V_{out}\\).\n\nAssume \\(V_{TN}>0\\) and let \\(|V_{TP}|\\) be the magnitude of the pMOS threshold voltage.\n\n### Device turn-on conditions\n\nFor \\(M_1\\):\n\\[\nV_{GS1}=V_{in}\n\\]\nso \\(M_1\\) turns on when\n\\[\nV_{in}>V_{TN}.\n\\]\n\nFor \\(M_2\\):\n\\[\nV_{SG2}=V_{DD}-V_{in}\n\\]\nso \\(M_2\\) turns on when\n\\[\nV_{in}<V_{DD}-|V_{TP}|.\n\\]\n\n### Logic operation\n\n| \\(V_{in}\\) | \\(M_1\\) | \\(M_2\\) | \\(V_{out}\\) |\n|---|---|---|---|\n| Low, approximately \\(0\\) | OFF | ON | \\(V_{DD}\\) |\n| High, approximately \\(V_{DD}\\) | ON | OFF | \\(0\\) |\n\nThus,\n\\[\nV_{out}\\approx \\overline{V_{in}},\n\\]\nwith\n\\[\nV_{OH}\\approx V_{DD},\\qquad V_{OL}\\approx 0.\n\\]\n\nWhen the input is low, \\(M_2\\) connects the output to \\(V_{DD}\\), while \\(M_1\\) is open. When the input is high, \\(M_1\\) connects the output to ground, while \\(M_2\\) is open.\n\n### Transition region\n\nFor\n\\[\nV_{TN}<V_{in}<V_{DD}-|V_{TP}|,\n\\]\nboth MOSFETs conduct. The output voltage is determined by equating the pull-down and pull-up currents:\n\\[\nI_{D1}=|I_{D2}|.\n\\]\n\nUsing the long-channel square-law model, the approximate switching voltage \\(V_M\\), defined by \\(V_{out}=V_{in}=V_M\\), is obtained from\n\\[\n\\frac{1}{2}\\beta_n(V_M-V_{TN})^2\n=\n\\frac{1}{2}\\beta_p(V_{DD}-V_M-|V_{TP}|)^2,\n\\]\nwhere\n\\[\n\\beta_n=\\mu_n C_{ox}\\frac{W_n}{L_n},\n\\qquad\n\\beta_p=\\mu_p C_{ox}\\frac{W_p}{L_p}.\n\\]\n\nHence,\n\\[\nV_M=\n\\frac{\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)\n+\\sqrt{\\beta_n}V_{TN}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}.\n\\]\n\nFor matched effective strengths and equal threshold magnitudes,\n\\[\nV_M\\approx \\frac{V_{DD}}{2}.\n\\]\n\nThe voltage-transfer characteristic therefore changes steeply from \\(V_{DD}\\) to \\(0\\). In the transition region both devices are on, producing a temporary current path from \\(V_{DD}\\) to ground. In the two steady logic states, the ideal CMOS inverter has essentially zero dc power consumption.",
        "format": "markdown",
        "sha256": "413777c3b203779f93f86285d1ad77d018a3db91fac204c5639d6ec0d0f809e1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up, and accurately explains the logic operation and transition behavior. The additional switching-point analysis is also consistent with the stated model.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 14194,
        "total_tokens": 14474,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 14194,
        "total_tokens": 14474,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a complementary MOS (CMOS) inverter. \\(M_2\\) is a p-channel MOSFET connected to \\(V_{DD}\\), and \\(M_1\\) is an n-channel MOSFET connected to ground. Their gates are tied together at \\(V_{in}\\), and their drains are tied together at \\(V_{out}\\).\n\nAssuming the body terminals are connected to the appropriate supplies,\n\n\\[\nV_{GS1}=V_{in},\\qquad V_{DS1}=V_{out}\n\\]\n\nand\n\n\\[\nV_{SG2}=V_{DD}-V_{in},\\qquad V_{SD2}=V_{DD}-V_{out}.\n\\]\n\n### Logic operation\n\n| \\(V_{in}\\) | \\(M_1\\) | \\(M_2\\) | \\(V_{out}\\) |\n|---|---|---|---|\n| Low, \\(V_{in}<V_{TN}\\) | OFF | ON | \\(\\approx V_{DD}\\) |\n| High, \\(V_{in}>V_{DD}-|V_{TP}|\\) | ON | OFF | \\(\\approx 0\\) |\n\nThus,\n\n\\[\n\\boxed{V_{out}=\\overline{V_{in}}}\n\\]\n\nFor a low input, \\(M_2\\) pulls the output up to \\(V_{DD}\\). For a high input, \\(M_1\\) pulls the output down to ground.\n\nIdeally, the static supply current is nearly zero in either logic state because one transistor is off.\n\n### Transition region\n\nFor\n\n\\[\nV_{TN}<V_{in}<V_{DD}-|V_{TP}|,\n\\]\n\nboth transistors conduct. The output voltage is determined by equating the magnitudes of their drain currents:\n\n\\[\nI_{D1}=I_{D2}.\n\\]\n\nUsing the long-channel square-law model, define\n\n\\[\n\\beta_n=\\mu_n C_{\\mathrm{ox}}\\frac{W_n}{L_n},\\qquad\n\\beta_p=\\mu_p C_{\\mathrm{ox}}\\frac{W_p}{L_p}.\n\\]\n\nOn the lower-input side, \\(M_1\\) is usually in saturation and \\(M_2\\) in triode:\n\n\\[\n\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n=\n\\beta_p\\left[\n(V_{DD}-V_{in}-|V_{TP}|)(V_{DD}-V_{out})\n-\\frac{(V_{DD}-V_{out})^2}{2}\n\\right].\n\\]\n\nOn the higher-input side, \\(M_1\\) is in triode and \\(M_2\\) in saturation:\n\n\\[\n\\beta_n\\left[\n(V_{in}-V_{TN})V_{out}-\\frac{V_{out}^2}{2}\n\\right]\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{in}-|V_{TP}|)^2.\n\\]\n\nThe switching point \\(V_M\\), defined approximately by \\(V_{out}=V_{in}=V_M\\), is\n\n\\[\n\\boxed{\nV_M=\n\\frac{\n\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)\n+\\sqrt{\\beta_n}V_{TN}\n}{\n\\sqrt{\\beta_n}+\\sqrt{\\beta_p}\n}\n}\n\\]\n\nFor matched devices with \\(V_{TN}=|V_{TP}|\\) and \\(\\beta_n=\\beta_p\\),\n\n\\[\nV_M\\approx \\frac{V_{DD}}{2}.\n\\]\n\nThe voltage gain is large in the transition region and can be approximated by\n\n\\[\nA_v\\approx -(g_{mn}+g_{mp})(r_{on}\\parallel r_{op}).\n\\]\n\nDuring switching, both transistors conduct simultaneously, producing a temporary current from \\(V_{DD}\\) to ground and charging or discharging the load capacitance.",
        "format": "markdown",
        "sha256": "5354833b08a4f22bc32881ca9b0df52667a4ae8551729b92aeaf8dda31a40a6a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and explains the logic operation. The additional transition-region, switching-point, and gain analysis is consistent with the standard model.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 8718,
        "total_tokens": 8998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7874,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 8718,
        "total_tokens": 8998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7874,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter**. \\(M_1\\) is a p-channel MOSFET connected to \\(V_{DD}\\), and \\(M_2\\) is an n-channel MOSFET connected to ground. Their gates are tied together at \\(V_{in}\\), and their drains are tied together at \\(V_{out}\\).\n\n### Operation\n\n| \\(V_{in}\\) | \\(M_1\\) (pMOS) | \\(M_2\\) (nMOS) | \\(V_{out}\\) |\n|---|---|---|---|\n| Low, approximately \\(0\\) | ON | OFF | \\(V_{DD}\\) |\n| High, approximately \\(V_{DD}\\) | OFF | ON | \\(0\\) |\n\nThus,\n\n\\[\nV_{out}=\\overline{V_{in}}\n\\]\n\n#### For a low input\n\n\\[\nV_{GS2}\\approx 0<V_{TN}\n\\]\n\nso \\(M_2\\) is off. Meanwhile,\n\n\\[\nV_{SG1}\\approx V_{DD}>|V_{TP}|\n\\]\n\nso \\(M_1\\) conducts and charges the output to \\(V_{DD}\\).\n\n#### For a high input\n\n\\[\nV_{SG1}\\approx 0<|V_{TP}|\n\\]\n\nso \\(M_1\\) is off. Also,\n\n\\[\nV_{GS2}\\approx V_{DD}>V_{TN}\n\\]\n\nso \\(M_2\\) conducts and discharges the output to ground.\n\n### Transition region\n\nFor an intermediate input voltage, both transistors conduct simultaneously. The output changes rapidly from \\(V_{DD}\\) to \\(0\\). The switching voltage \\(V_M\\), approximately defined by \\(V_{out}=V_{in}=V_M\\), is found from equal nMOS and pMOS currents:\n\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{TP}|)^2\n\\]\n\nwhere\n\n\\[\n\\beta_n=\\mu_n C_{ox}\\frac{W_n}{L_n},\n\\qquad\n\\beta_p=\\mu_p C_{ox}\\frac{W_p}{L_p}.\n\\]\n\nTherefore,\n\n\\[\nV_M=\n\\frac{\\sqrt{\\beta_n}V_{TN}\n+\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}.\n\\]\n\nFor matched devices and equal-magnitude thresholds, \\(V_M\\approx V_{DD}/2\\).\n\n### Important properties\n\n- The input resistance is ideally very high because MOS gates draw essentially no DC current.\n- The steady-state power dissipation is ideally zero, except for leakage.\n- Power is consumed mainly while charging and discharging the load capacitance:\n\n\\[\nP_{\\text{dynamic}}\\approx \\alpha C_L V_{DD}^{2}f.\n\\]\n\n- During the input transition, both transistors are on briefly, producing short-circuit current from \\(V_{DD}\\) to ground.",
        "format": "markdown",
        "sha256": "ac3417f276f7c88d2a490d693218de72f9326d99db16d80342a328c4b043c01e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as pMOS and analyzes the circuit as a conventional CMOS inverter. The golden solution requires recognizing both devices as NMOS; this topology error requires a score of 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 6357,
        "total_tokens": 6652,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 6357,
        "total_tokens": 6652,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is a p-channel MOSFET and \\(M_2\\) is an n-channel MOSFET, the circuit is a **CMOS inverter (NOT gate)**.\n\n### Device conditions\n\nFor \\(M_1\\), whose source is connected to \\(V_{DD}\\),\n\n\\[\nV_{SG1}=V_{DD}-V_{in}\n\\]\n\nso \\(M_1\\) turns on when\n\n\\[\nV_{in}<V_{DD}-|V_{TP}|.\n\\]\n\nFor \\(M_2\\), whose source is grounded,\n\n\\[\nV_{GS2}=V_{in}\n\\]\n\nso \\(M_2\\) turns on when\n\n\\[\nV_{in}>V_{TN}.\n\\]\n\n### DC operation\n\n| \\(V_{in}\\) | \\(M_1\\) | \\(M_2\\) | \\(V_{out}\\) |\n|---|---|---|---|\n| Low, approximately \\(0\\) | ON | OFF | \\(V_{DD}\\) |\n| High, approximately \\(V_{DD}\\) | OFF | ON | \\(0\\) |\n\nThus,\n\n\\[\n\\boxed{V_{out}=\\overline{V_{in}}}\n\\]\n\nwith\n\n\\[\nV_{OH}\\approx V_{DD}, \\qquad V_{OL}\\approx 0.\n\\]\n\nIn either steady-state logic condition, one transistor is off, so the static supply current is ideally zero, apart from leakage.\n\n### Switching region\n\nAs \\(V_{in}\\) changes between logic low and high, both transistors conduct for part of the transition. The output voltage is then determined by the condition\n\n\\[\nI_{D2}=I_{D1}.\n\\]\n\nThe output falls when \\(V_{in}\\) rises and rises when \\(V_{in}\\) falls. The voltage-transfer characteristic therefore has a steep negative-slope transition region.\n\nUsing the long-channel square-law approximation, the approximate switching input voltage is\n\n\\[\nV_M \\approx\n\\frac{\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)+\\sqrt{\\beta_n}V_{TN}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}},\n\\]\n\nwhere \\(\\beta_n\\) and \\(\\beta_p\\) are the transistor strength parameters. For matched devices and equal-magnitude thresholds, \\(V_M\\approx V_{DD}/2\\).\n\nDuring switching, the load capacitance is charged through \\(M_1\\) or discharged through \\(M_2\\), producing propagation delay and dynamic power dissipation.",
        "format": "markdown",
        "sha256": "d107a2ab3f9cccb8b786cf5ce26f583bfbcf5d5144eaa84aadaf6686dcec6945"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as p-channel and analyzes the circuit as an ordinary CMOS inverter. The figure has two NMOS devices, so this violates the golden solution’s non-negotiable scoring rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 9144,
        "total_tokens": 9439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8597,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 9144,
        "total_tokens": 9439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8597,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter**. \\(M_1\\) is the p-channel MOSFET connected to \\(V_{DD}\\), and \\(M_2\\) is the n-channel MOSFET connected to ground. Their gates are tied to \\(V_{in}\\), and their drains are tied together at \\(V_{out}\\).\n\n### Transistor conditions\n\nFor \\(M_1\\) (pMOS),\n\n\\[\nV_{SG1}=V_{DD}-V_{in}\n\\]\n\nso it turns on when\n\n\\[\nV_{in}<V_{DD}-|V_{TP}|.\n\\]\n\nFor \\(M_2\\) (nMOS),\n\n\\[\nV_{GS2}=V_{in}\n\\]\n\nso it turns on when\n\n\\[\nV_{in}>V_{TN}.\n\\]\n\n### Logic operation\n\n| \\(V_{in}\\) | \\(M_1\\) | \\(M_2\\) | \\(V_{out}\\) |\n|---|---|---|---|\n| Low, approximately \\(0\\) | ON | OFF | \\(V_{DD}\\) |\n| High, approximately \\(V_{DD}\\) | OFF | ON | \\(0\\) |\n\nThus,\n\n\\[\n\\boxed{V_{out}=\\overline{V_{in}}}\n\\]\n\nfor digital input levels.\n\n### During switching\n\nFor an input between the two logic levels, both transistors can conduct. The output voltage is determined by the equality of their drain currents:\n\n\\[\nI_{D1}=I_{D2}.\n\\]\n\nThe input voltage at which \\(V_{out}=V_{in}=V_M\\), called the switching threshold, is approximately\n\n\\[\nV_M=\n\\frac{\\sqrt{\\beta_p}\\left(V_{DD}-|V_{TP}|\\right)\n+\\sqrt{\\beta_n}V_{TN}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}},\n\\]\n\nwhere\n\n\\[\n\\beta_n=\\mu_n C_{ox}\\frac{W_n}{L_n},\n\\qquad\n\\beta_p=\\mu_p C_{ox}\\frac{W_p}{L_p}.\n\\]\n\nFor matched devices and equal threshold magnitudes, \\(V_M\\) is near \\(V_{DD}/2\\).\n\n### Important properties\n\n- The output has nearly full rail-to-rail swing: \\(0\\) to \\(V_{DD}\\).\n- Ideally, there is no steady-state path from \\(V_{DD}\\) to ground, so static power dissipation is nearly zero.\n- During a transition, both MOSFETs briefly conduct, causing short-circuit current.\n- A load capacitance is charged through \\(M_1\\) when the input goes low and discharged through \\(M_2\\) when the input goes high.",
        "format": "markdown",
        "sha256": "ebea5dc7038d099b13260cc017f9d4d70f0064335beb89d48b3b6dd7010b36b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as a pMOS and analyzes the circuit as an ordinary CMOS inverter. The figure has two NMOS devices, so it fails the golden solution’s non-negotiable device-identification requirement.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3175,
        "total_tokens": 3470,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3175,
        "total_tokens": 3470,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS inverter with a diode-connected PMOS active load**. The gate and drain of \\(M_2\\) are tied to \\(V_{\\text{out}}\\).\n\nAssume long-channel MOSFETs, no channel-length modulation, and let\n\n\\[\n\\beta_1=\\mu_n C_{\\text{ox}}\\left(\\frac WL\\right)_1,\\qquad\n\\beta_2=\\mu_p C_{\\text{ox}}\\left(\\frac WL\\right)_2\n\\]\n\nwith \\(V_{TN}>0\\) and \\(V_{TP}=|V_{TP}|\\). Define\n\n\\[\nV_H=V_{DD}-V_{TP},\\qquad\nx=V_{\\text{in}}-V_{TN}.\n\\]\n\n## 1. Operation of \\(M_2\\)\n\nSince \\(M_2\\) is diode-connected,\n\n\\[\nV_{SG2}=V_{DD}-V_{\\text{out}},\\qquad\nV_{SD2}=V_{DD}-V_{\\text{out}}.\n\\]\n\nThus, whenever it is on, \\(M_2\\) is in saturation:\n\n\\[\nI_2=\\frac{\\beta_2}{2}\n\\left(V_{DD}-V_{\\text{out}}-V_{TP}\\right)^2\n=\\frac{\\beta_2}{2}(V_H-V_{\\text{out}})^2.\n\\]\n\nIt turns off when\n\n\\[\nV_{\\text{out}}\\simeq V_{DD}-V_{TP}=V_H.\n\\]\n\n## 2. Operation of \\(M_1\\)\n\nFor \\(M_1\\),\n\n\\[\nV_{GS1}=V_{\\text{in}},\\qquad V_{DS1}=V_{\\text{out}}.\n\\]\n\n- Cutoff if \\(V_{\\text{in}}\\le V_{TN}\\)\n- Saturation if \\(V_{\\text{out}}\\ge V_{\\text{in}}-V_{TN}=x\\)\n- Triode if \\(V_{\\text{out}}<x\\)\n\nThe drain current is\n\n\\[\nI_1=\n\\begin{cases}\n0, & x\\le 0,\\\\[4pt]\n\\dfrac{\\beta_1}{2}x^2,\n& x>0,\\; V_{\\text{out}}\\ge x,\\\\[8pt]\n\\beta_1\\left(xV_{\\text{out}}-\\dfrac{V_{\\text{out}}^2}{2}\\right),\n& x>0,\\; V_{\\text{out}}<x.\n\\end{cases}\n\\]\n\nAt dc, \\(I_1=I_2\\).\n\n## 3. Voltage-transfer characteristic\n\n### Low input\n\nIf\n\n\\[\nV_{\\text{in}}\\le V_{TN},\n\\]\n\nthen \\(M_1\\) is off and \\(M_2\\) charges the output up to\n\n\\[\n\\boxed{V_{\\text{out}}\\simeq V_{DD}-V_{TP}}.\n\\]\n\nThus the high output is degraded by one PMOS threshold voltage.\n\n### Moderate input: \\(M_1\\) in saturation\n\nEquating the two saturation currents gives\n\n\\[\n\\frac{\\beta_1}{2}x^2\n=\n\\frac{\\beta_2}{2}(V_H-V_{\\text{out}})^2.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_H-\\sqrt{\\frac{\\beta_1}{\\beta_2}}\\,\n(V_{\\text{in}}-V_{TN})\n}\n\\]\n\nprovided that \\(M_1\\) remains in saturation.\n\nLet\n\n\\[\nr=\\sqrt{\\frac{\\beta_1}{\\beta_2}}.\n\\]\n\nThe transition to the triode region occurs when \\(V_{\\text{out}}=x\\), giving\n\n\\[\nx_B=\\frac{V_H}{1+r}.\n\\]\n\nHence this expression applies for\n\n\\[\n0\\le V_{\\text{in}}-V_{TN}\\le \\frac{V_H}{1+r}.\n\\]\n\n### Large input: \\(M_1\\) in triode\n\nFor larger input voltages, \\(M_1\\) is in triode and\n\n\\[\n\\beta_1\\left(xV_{\\text{out}}\n-\\frac{V_{\\text{out}}^2}{2}\\right)\n=\n\\frac{\\beta_2}{2}(V_H-V_{\\text{out}})^2.\n\\]\n\nThe physical solution is\n\n\\[\n\\boxed{\nV_{\\text{out}}=\n\\frac{\n\\beta_1x+\\beta_2V_H\n-\n\\sqrt{(\\beta_1x+\\beta_2V_H)^2\n-\\beta_2(\\beta_1+\\beta_2)V_H^2}\n}\n{\\beta_1+\\beta_2}\n}\n\\]\n\nwith \\(x=V_{\\text{in}}-V_{TN}\\).\n\nThe output does not reach zero for a finite input voltage. For a strong \\(M_1\\), an approximate low output is\n\n\\[\nV_{OL}\\approx\n\\frac{\\beta_2V_H^2}\n{2\\beta_1(V_{\\text{in}}-V_{TN})}.\n\\]\n\n## 4. Voltage gain\n\nWhen \\(M_1\\) is in saturation and channel-length modulation is neglected,\n\n\\[\nA_v=\\frac{dV_{\\text{out}}}{dV_{\\text{in}}}\n=\n-\\sqrt{\\frac{\\beta_1}{\\beta_2}}.\n\\]\n\nIncluding output conductances,\n\n\\[\n\\boxed{\nA_v\\approx\n-\\frac{g_{m1}}\n{g_{m2}+g_{o1}+g_{o2}}\n}.\n\\]\n\nIn the triode region of \\(M_1\\),\n\n\\[\n\\frac{dV_{\\text{out}}}{dV_{\\text{in}}}\n=\n-\\frac{\\beta_1V_{\\text{out}}}\n{\\beta_1(x-V_{\\text{out}})\n+\\beta_2(V_H-V_{\\text{out}})}.\n\\]\n\n## Main characteristics\n\n- \\(M_2\\) is a diode-connected PMOS load and is always in saturation when on.\n- \\(V_{OH}\\approx V_{DD}-|V_{TP}|\\), not \\(V_{DD}\\).\n- For high input, both transistors conduct, causing static power dissipation.\n- \\(V_{OL}\\) is not exactly zero.\n- This circuit therefore has poorer logic levels and static power consumption than a complementary CMOS inverter.",
        "format": "markdown",
        "sha256": "25a9b17408acfacba74cacf8b7badde881914b989ab74e230c579c0c996b38e0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both devices’ output conductances included, equivalent to the golden solution. Large-signal details are optional.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 16931,
        "total_tokens": 17651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 16931,
        "total_tokens": 17651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The upper device is a **diode-connected pMOS**: its source is connected to \\(V_{DD}\\), and its gate is tied to its drain at \\(V_{out}\\). The lower device is an nMOS with source grounded.\n\nAssume long-channel square-law operation, body terminals tied to the sources, and neglect channel-length modulation. Define\n\n\\[\n\\beta_1=\\mu_n C_{\\mathrm{ox}}\\left(\\frac WL\\right)_1,\\qquad\n\\beta_2=\\mu_p C_{\\mathrm{ox}}\\left(\\frac WL\\right)_2\n\\]\n\nand\n\n\\[\nU=V_{DD}-|V_{TP2}|,\\qquad\nA=V_{in}-V_{TN1}.\n\\]\n\n## Device operating regions\n\nFor \\(M_2\\),\n\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{out}.\n\\]\n\nThus, whenever it is on, it is always in saturation:\n\n\\[\nV_{out}<U,\n\\]\n\nand its current magnitude is\n\n\\[\nI_2=\\frac{\\beta_2}{2}(U-V_{out})^2.\n\\]\n\nFor \\(M_1\\),\n\n\\[\nV_{GS1}=V_{in},\\qquad V_{DS1}=V_{out}.\n\\]\n\nIf \\(V_{in}>V_{TN1}\\), then\n\n- \\(M_1\\) is in saturation if \\(V_{out}\\ge A\\),\n- \\(M_1\\) is in triode if \\(V_{out}<A\\).\n\nThe dc operating point satisfies\n\n\\[\nI_1=I_2.\n\\]\n\n## Voltage-transfer characteristic\n\n### 1. Low input\n\nFor\n\n\\[\nV_{in}\\le V_{TN1},\n\\]\n\n\\(M_1\\) is off. Starting from a low output, \\(M_2\\) charges the output until\n\n\\[\nV_{SG2}=|V_{TP2}|,\n\\]\n\nso the normal high level is approximately\n\n\\[\nV_{OH}\\simeq V_{DD}-|V_{TP2}|.\n\\]\n\nStrictly, with no load, both transistors are off for any \\(V_{out}\\ge U\\), so the ideal dc model does not uniquely fix the voltage above \\(U\\). A diode-connected pMOS cannot actively guarantee a full-\\(V_{DD}\\) high level.\n\n### 2. \\(M_1\\) in saturation\n\nFor \\(V_{in}>V_{TN1}\\), if \\(M_1\\) remains in saturation,\n\n\\[\nI_1=\\frac{\\beta_1}{2}A^2.\n\\]\n\nEquating the two currents,\n\n\\[\n\\frac{\\beta_1}{2}A^2\n=\n\\frac{\\beta_2}{2}(U-V_{out})^2.\n\\]\n\nHence\n\n\\[\n\\boxed{\nV_{out}=U-\\sqrt{\\frac{\\beta_1}{\\beta_2}}\\,\n(V_{in}-V_{TN1})\n}\n\\]\n\nwith the validity condition\n\n\\[\nV_{out}\\ge A.\n\\]\n\nLet\n\n\\[\nr=\\sqrt{\\frac{\\beta_1}{\\beta_2}}.\n\\]\n\nThe boundary between saturation and triode operation of \\(M_1\\) is\n\n\\[\nA=\\frac{U}{1+r},\n\\]\n\nor\n\n\\[\nV_{in}=V_{TN1}+\\frac{U}{1+r}.\n\\]\n\n### 3. \\(M_1\\) in triode\n\nFor larger input voltages, \\(M_1\\) enters triode:\n\n\\[\nI_1=\\beta_1\\left(A V_{out}-\\frac{V_{out}^2}{2}\\right).\n\\]\n\nThe output is determined by\n\n\\[\n\\frac{\\beta_2}{2}(U-V_{out})^2\n=\n\\beta_1\\left(A V_{out}-\\frac{V_{out}^2}{2}\\right).\n\\]\n\nThe physically meaningful solution is\n\n\\[\n\\boxed{\nV_{out}=\n\\frac{\n\\beta_2 U+\\beta_1 A\n-\n\\sqrt{(\\beta_2 U+\\beta_1 A)^2\n-\\beta_2(\\beta_1+\\beta_2)U^2}\n}{\n\\beta_1+\\beta_2\n}\n}\n\\]\n\nfor\n\n\\[\nA>\\frac{U}{1+r}.\n\\]\n\nThus, even for a high input, \\(V_{out}\\) is generally not zero because \\(M_2\\) remains on and supplies current. If \\(M_1\\) is much stronger than \\(M_2\\),\n\n\\[\nV_{OL}\\approx\n\\frac{\\beta_2 U^2}\n{2\\beta_1(V_{DD}-V_{TN1})}.\n\\]\n\n## Small-signal gain\n\nWhen both devices are on and \\(M_1\\) is in saturation, \\(M_2\\)'s gate-drain connection makes its small-signal conductance approximately\n\n\\[\ng_{m2}+g_{ds2}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n-\\frac{g_{m1}}\n{g_{m2}+g_{ds1}+g_{ds2}}\n}\n\\]\n\nor, neglecting channel-length modulation,\n\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_{m1}}{g_{m2}}\n=-\\sqrt{\\frac{\\beta_1}{\\beta_2}}\n}.\n\\]\n\nHence the circuit is an **inverting common-source stage with a diode-connected pMOS active load**. It has a threshold-limited high output, a nonzero low output, and nonzero static power whenever \\(M_1\\) conducts.",
        "format": "markdown",
        "sha256": "306048996ba69d2ca817abfd7a5f937682c9fb16e18969a30f39d028ed266fc8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including channel-length modulation consistently for both devices. The additional operating-point discussion does not undermine the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 27567,
        "total_tokens": 28287,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26331,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 27567,
        "total_tokens": 28287,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26331,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The upper transistor is a **diode-connected PMOS**: its source is connected to \\(V_{DD}\\), and its gate and drain are tied to \\(V_{out}\\). The lower transistor is an NMOS with source grounded and gate driven by \\(V_{in}\\).\n\nAssume long-channel MOSFETs, no channel-length modulation, and no external load. Define\n\n\\[\n\\beta_n=\\mu_n C_{\\rm ox}\\left(\\frac WL\\right)_1,\\qquad\n\\beta_p=\\mu_p C_{\\rm ox}\\left(\\frac WL\\right)_2\n\\]\n\nand\n\n\\[\nA=V_{DD}-|V_{TP}|.\n\\]\n\n## 1. Operating regions\n\nFor \\(M_2\\),\n\n\\[\nV_{SG2}=V_{DD}-V_{out},\\qquad\nV_{SD2}=V_{DD}-V_{out}.\n\\]\n\nThus, \\(M_2\\) turns on when\n\n\\[\nV_{out}<V_{DD}-|V_{TP}|=A.\n\\]\n\nWhen on, it is always in saturation because\n\n\\[\nV_{SD2}=V_{SG2}\\geq V_{SG2}-|V_{TP}|.\n\\]\n\nIts current is\n\n\\[\nI_2=\\frac{\\beta_p}{2}(A-V_{out})^2.\n\\]\n\nFor \\(M_1\\), letting\n\n\\[\nu=V_{in}-V_{TN},\n\\]\n\nwe have\n\n\\[\n\\begin{cases}\nM_1\\text{ cutoff}, & V_{in}\\leq V_{TN},\\\\[2mm]\nM_1\\text{ saturation}, & V_{out}\\geq u,\\\\[2mm]\nM_1\\text{ triode}, & V_{out}<u.\n\\end{cases}\n\\]\n\n## 2. DC voltage transfer characteristic\n\n### Low input\n\nFor \\(V_{in}\\leq V_{TN}\\), \\(M_1\\) is off. The PMOS charges the output to \\(V_{DD}\\), where it also turns off:\n\n\\[\n\\boxed{V_{out}\\approx V_{DD}}\n\\]\n\nand the dc supply current is approximately zero.\n\n### Both transistors in saturation\n\nFor \\(V_{in}>V_{TN}\\), with \\(M_1\\) still in saturation,\n\n\\[\nI_1=\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2.\n\\]\n\nEquating the two transistor currents,\n\n\\[\n\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-|V_{TP}|-V_{out})^2.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nV_{out}\n=\nV_{DD}-|V_{TP}|\n-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,\n(V_{in}-V_{TN})\n}\n\\]\n\nThis expression is valid as long as \\(M_1\\) remains saturated. The boundary is obtained from \\(V_{out}=V_{in}-V_{TN}\\):\n\n\\[\nV_{in}-V_{TN}\n=\n\\frac{A}{1+\\sqrt{\\beta_n/\\beta_p}}.\n\\]\n\n### High input: \\(M_1\\) in triode\n\nFor larger input voltages, \\(M_1\\) enters the triode region while \\(M_2\\) remains saturated. The current equation is\n\n\\[\n\\beta_n\\left[uV_{out}-\\frac{V_{out}^2}{2}\\right]\n=\n\\frac{\\beta_p}{2}(A-V_{out})^2.\n\\]\n\nThe physical solution is\n\n\\[\n\\boxed{\nV_{out}\n=\n\\frac{\n\\beta_n u+\\beta_p A\n-\\sqrt{(\\beta_n u+\\beta_p A)^2\n-\\beta_p(\\beta_n+\\beta_p)A^2}\n}{\n\\beta_n+\\beta_p\n}\n}\n\\]\n\nwhere \\(u=V_{in}-V_{TN}\\).\n\nFor a strong NMOS and a high input, this reduces approximately to\n\n\\[\nV_{out}\\approx\n\\frac{\\beta_p A^2}{2\\beta_n(V_{in}-V_{TN})}.\n\\]\n\nThus, \\(V_{out}\\) is small but not exactly zero because the diode-connected PMOS continues to source current.\n\n## 3. Small-signal voltage gain\n\nIn the region where both devices are in saturation, the diode-connected PMOS has small-signal resistance\n\n\\[\nr_{M_2}\\approx \\frac{1}{g_{m2}+g_{o2}}.\n\\]\n\nHence,\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n=\n-\\frac{g_{m1}}\n{g_{o1}+g_{m2}+g_{o2}}.\n\\]\n\nNeglecting channel-length modulation,\n\n\\[\n\\boxed{A_v\\approx-\\frac{g_{m1}}{g_{m2}}}\n\\]\n\nand, using the dc relation,\n\n\\[\n\\boxed{\nA_v\\approx-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n}.\n\\]\n\nThe small-signal output resistance is approximately\n\n\\[\n\\boxed{\nR_{out}\\approx r_{o1}\\parallel \\frac{1}{g_{m2}+g_{o2}}\n}.\n\\]\n\n## Overall behavior\n\nThis circuit is an **inverting amplifier/inverter with a diode-connected PMOS active load**:\n\n- Low \\(V_{in}\\): \\(M_1\\) off, \\(V_{out}\\approx V_{DD}\\).\n- High \\(V_{in}\\): \\(M_1\\) on, \\(V_{out}\\) is pulled low.\n- Unlike a conventional CMOS inverter, it has nonzero static power when both transistors conduct.\n- The low output voltage depends on the strength ratio \\(\\beta_n/\\beta_p\\).",
        "format": "markdown",
        "sha256": "653333d6b2ba07189a544f47eba28060333bff59a46fd68b52e41cd587e54ec9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including channel-length modulation consistently as −gm1/(go1+gm2+go2). The additional operating-point analysis does not contradict the essential result.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 17839,
        "total_tokens": 18559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 17839,
        "total_tokens": 18559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the usual CMOS interpretation, \\(M_2\\) is a pMOS pull-up transistor and \\(M_1\\) is an nMOS pull-down transistor.\n\nFor \\(M_1\\), both its gate and source are grounded:\n\n\\[\nV_{GS1}=0\n\\]\n\nThus, for an enhancement-mode nMOS with \\(V_{TN}>0\\),\n\n\\[\nM_1 \\text{ is always OFF}\n\\]\n\nFor \\(M_2\\), its source is at \\(V_{DD}\\), so\n\n\\[\nV_{SG2}=V_{DD}-V_{in}\n\\]\n\nIt turns on when\n\n\\[\nV_{in}<V_{DD}-|V_{TP}|\n\\]\n\nThe operating states are therefore:\n\n| \\(V_{in}\\) | \\(M_2\\) | \\(M_1\\) | \\(V_{out}\\) |\n|---|---|---|---|\n| Low | ON | OFF | Pulled to \\(V_{DD}\\) |\n| High | OFF | OFF | High impedance/floating |\n\nWhen \\(V_{in}\\) is low, \\(M_2\\) charges the output to approximately \\(V_{DD}\\). When \\(V_{in}\\) is high, both transistors are off, so there is no path to ground. The output voltage is then undefined in steady state and, ideally, retains whatever charge was previously on the output capacitance. Leakage or an external load will eventually determine its voltage.\n\nHence, the circuit as drawn is **not a CMOS inverter**; it is an active-low pull-up or precharge circuit. To obtain a CMOS inverter, the gate of \\(M_1\\) should also be connected to \\(V_{in}\\).",
        "format": "markdown",
        "sha256": "782b5c721813c7e69b534d9ff26d8a1313c6b15eeb2f287127385eddb1cee0ba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS and therefore concludes the output floats. In the figure both devices are PMOS; M1 is a diode-connected PMOS load, giving a gm/gm amplifier rather than a precharge circuit.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 23105,
        "total_tokens": 24783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22737,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 23105,
        "total_tokens": 24783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22737,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter**. \\(M_1\\) is the NMOS pull-down transistor and \\(M_2\\) is the PMOS pull-up transistor.\n\nAssume the transistor bodies are connected to their sources, \\(V_{TN}>0\\), and \\(|V_{TP}|>0\\).\n\n### Device voltages\n\nFor \\(M_1\\) (NMOS),\n\n\\[\nV_{GS1}=V_{in}, \\qquad V_{DS1}=V_{out}.\n\\]\n\nFor \\(M_2\\) (PMOS),\n\n\\[\nV_{SG2}=V_{DD}-V_{in}, \\qquad\nV_{SD2}=V_{DD}-V_{out}.\n\\]\n\nThus,\n\n\\[\nM_1 \\text{ is on if } V_{in}>V_{TN},\n\\]\n\nand\n\n\\[\nM_2 \\text{ is on if } V_{in}<V_{DD}-|V_{TP}|.\n\\]\n\n### Logic operation\n\n| Input | \\(M_1\\) | \\(M_2\\) | Output |\n|---|---|---|---|\n| \\(V_{in}=0\\) | OFF | ON | \\(V_{out}\\approx V_{DD}\\) |\n| \\(V_{in}=V_{DD}\\) | ON | OFF | \\(V_{out}\\approx 0\\) |\n| Intermediate | ON | ON | Output transitions from high to low |\n\nTherefore,\n\n\\[\n\\boxed{V_{out}\\approx \\overline{V_{in}}}\n\\]\n\nin the digital logic sense.\n\n- For a low input, \\(M_1\\) is off and \\(M_2\\) charges the output to \\(V_{DD}\\).\n- For a high input, \\(M_2\\) is off and \\(M_1\\) discharges the output to ground.\n- During the transition, both transistors conduct and a current flows directly from \\(V_{DD}\\) to ground.\n\n### Switching point\n\nLet\n\n\\[\n\\beta_1=\\mu_n C_{\\text{ox}}\\left(\\frac WL\\right)_1,\n\\qquad\n\\beta_2=\\mu_p C_{\\text{ox}}\\left(\\frac WL\\right)_2.\n\\]\n\nAt the inverter switching voltage \\(V_M\\), usually defined by \\(V_{out}=V_{in}=V_M\\), both devices are approximately in saturation. Equating their currents gives\n\n\\[\n\\frac{\\beta_1}{2}(V_M-V_{TN})^2\n=\n\\frac{\\beta_2}{2}\n\\left(V_{DD}-V_M-|V_{TP}|\\right)^2.\n\\]\n\nHence,\n\n\\[\n\\boxed{\nV_M=\n\\frac{\n\\sqrt{\\beta_2}(V_{DD}-|V_{TP}|)\n+\\sqrt{\\beta_1}V_{TN}\n}{\n\\sqrt{\\beta_1}+\\sqrt{\\beta_2}\n}\n}\n\\]\n\nFor matched devices with \\(V_{TN}=|V_{TP}|\\) and \\(\\beta_1=\\beta_2\\),\n\n\\[\nV_M=\\frac{V_{DD}}{2}.\n\\]\n\nThe voltage-transfer characteristic is therefore a steeply decreasing curve from \\(V_{DD}\\) to \\(0\\). In the ideal model, the static power is nearly zero at the two logic levels because one transistor is always off; power is primarily dissipated while the input is switching.",
        "format": "markdown",
        "sha256": "92d8423cbbd95d456781a96362de9f7eb56a3e53b8d8641de92f6d355fc17c0e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a CMOS inverter with an NMOS pull-down. Both devices are PMOS; M1 is a diode-connected PMOS load, giving a common-source gm/gm amplifier rather than inverter logic.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 8501,
        "total_tokens": 10179,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 8501,
        "total_tokens": 10179,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the upper transistor \\(M_2\\) is a pMOS and the lower transistor \\(M_1\\) is an nMOS:\n\n### 1. Lower transistor \\(M_1\\)\n\nIts gate and source are both connected to ground, so\n\n\\[\nV_{GS1}=0.\n\\]\n\nFor an enhancement-mode nMOS with \\(V_{TN}>0\\), \\(M_1\\) is always OFF.\n\n### 2. Upper transistor \\(M_2\\)\n\nThe source of \\(M_2\\) is connected to \\(V_{DD}\\), while its gate is driven by \\(V_{\\text{in}}\\). Thus,\n\n\\[\nV_{SG2}=V_{DD}-V_{\\text{in}}.\n\\]\n\nThe pMOS turns on when\n\n\\[\nV_{\\text{in}}<V_{DD}-|V_{TP}|.\n\\]\n\nWhen it is on, it pulls the output toward \\(V_{DD}\\).\n\n### Operation\n\n| \\(V_{\\text{in}}\\) | \\(M_2\\) | \\(M_1\\) | \\(V_{\\text{out}}\\) |\n|---|---|---|---|\n| Low, e.g. \\(0\\) | ON | OFF | \\(\\approx V_{DD}\\) |\n| High, e.g. \\(V_{DD}\\) | OFF | OFF | High impedance/floating |\n\nTherefore, as drawn, the circuit is **not a CMOS inverter**. For a high input, there is no transistor pulling \\(V_{\\text{out}}\\) to ground; the output simply floats and may retain its previous charge because of output capacitance. Its voltage will then be determined by leakage, loading, or initial conditions.\n\nIf \\(M_1\\)'s gate was intended to be connected to \\(V_{\\text{in}}\\) rather than ground, the circuit would be the usual CMOS inverter.",
        "format": "markdown",
        "sha256": "ab3edb4a09f8c361f6bec04898a57f16b1f32ff01a8d0ac44679f508234c1ef5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the lower PMOS as an off NMOS, so it misses the diode-connected PMOS load and the gm/gm amplifier behavior; its floating-output conclusion is contrary to the circuit’s essential operation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 27431,
        "total_tokens": 29109,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27031,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 27431,
        "total_tokens": 29109,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27031,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) as ac grounds. Let \\(v_x\\) be the small-signal voltage at node \\(X\\), and define \\(g_{oi}=1/r_{oi}\\).\n\nAt node \\(X\\),\n\n\\[\n(g_{m1}+g_{o1}+g_{o2})v_x=g_{o1}v_o .\n\\]\n\nThe test current at the output is\n\n\\[\ni_o=g_{o1}(v_o-v_x)-g_{m1}v_x .\n\\]\n\nThus,\n\n\\[\n\\boxed{R_{\\text{out}}\n=\\frac{v_o}{i_o}\n=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nor, for \\(g_{m1}r_{o1}\\gg 1\\),\n\n\\[\n\\boxed{R_{\\text{out}}\\approx g_{m1}r_{o1}r_{o2}}.\n\\]\n\nIf body effect is included, replace \\(g_{m1}\\) with \\(g_{m1}+g_{mb1}\\).",
        "format": "markdown",
        "sha256": "0fced664df5e9795253aa4ad2617db9004263c7febac0ead0ef6a805a5d861ff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the correct exact output resistance with the cascode contribution from M1, the correct leading approximation, and the optional body-effect correction.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 13203,
        "total_tokens": 15872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 13203,
        "total_tokens": 15872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are AC grounds and neglecting body effect, let \\(r_{o1}\\) and \\(r_{o2}\\) be the transistor output resistances.\n\nFor a test voltage at the output, the small-signal resistance is\n\n\\[\n\\boxed{R_{\\text{out}}\n= r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nor equivalently,\n\n\\[\nR_{\\text{out}}=r_{o1}+(1+g_{m1}r_{o1})r_{o2}.\n\\]\n\nFor \\(g_{m1}r_{o1}\\gg 1\\),\n\n\\[\n\\boxed{R_{\\text{out}}\\approx g_{m1}r_{o1}r_{o2}}.\n\\]\n\nHere \\(g_{m1}\\) appears because the source of \\(M_1\\) is the intermediate node \\(X\\); \\(M_2\\) is effectively \\(r_{o2}\\) to AC ground.",
        "format": "markdown",
        "sha256": "9ebf06b0ba1eb18c466ceccc1988e2203b4faa3798c224f74c43c3c6b010f530"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the correct Rout expression and approximation, with gm1 as the cascode contribution; neglecting body effect is explicitly acceptable.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 11640,
        "total_tokens": 14309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 11640,
        "total_tokens": 14309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are AC grounds and neglecting body effect, let \\(r_{o1}\\) and \\(r_{o2}\\) be the transistor output resistances.\n\nFor a test voltage \\(v_o\\) at the output, the small-signal resistance is\n\n\\[\n\\boxed{R_{\\text{out}}\n=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nwhere \\(M_1\\) is the cascode transistor since its source is connected to node \\(X\\).\n\nFor large intrinsic gain,\n\n\\[\n\\boxed{R_{\\text{out}}\\approx g_{m1}r_{o1}r_{o2}}.\n\\]\n\nIncluding body effect, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).",
        "format": "markdown",
        "sha256": "a252855e556d1882e3f441586e694338c3fb22765d6cf83350fdb716abfe4467"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the cascode device and gives the correct output-resistance expression and approximation. Neglecting body effect is explicitly allowed, and the body-effect correction is also stated.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 13150,
        "total_tokens": 15819,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 13150,
        "total_tokens": 15819,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The schematic alone does not guarantee saturation; the dc voltage at node \\(X\\) must satisfy the MOSFET region condition.\n\nFor the high-side **PMOS** orientation shown,\n\n\\[\nV_{S2}=V_{DD},\\qquad V_{D2}=V_X,\\qquad V_{G2}=V_{b2}.\n\\]\n\nM2 must first be on:\n\n\\[\nV_{DD}-V_{b2}>|V_{TP2}|.\n\\]\n\nIts saturation condition is\n\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP2}|.\n\\]\n\nSubstituting the node voltages,\n\n\\[\nV_{DD}-V_X \\ge V_{DD}-V_{b2}-|V_{TP2}|,\n\\]\n\nso\n\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|}.\n\\]\n\nTherefore, choose \\(V_{b2}\\) and the bias current so that the **maximum** dc or signal value of \\(V_X\\) remains below \\(V_{b2}+|V_{TP2}|\\), with some design margin. If \\(V_X\\) exceeds this value, M2 enters the triode region.\n\nIf the devices are instead intended to be NMOS devices with \\(D_2=V_{DD}\\) and \\(S_2=X\\), the corresponding condition is\n\n\\[\nV_{DD}-X\\ge V_{b2}-X-V_{TN}\n\\quad\\Rightarrow\\quad\nV_{DD}\\ge V_{b2}-V_{TN},\n\\]\n\nalong with \\(V_{b2}-X>V_{TN}\\) to keep M2 turned on.",
        "format": "markdown",
        "sha256": "87dcdbcb59071f1043d96b40a0f4b2c654192f93e133a0be3cc807857bac7b34"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M2 as a PMOS and gives its saturation condition in terms of VX and Vb2, but misses the essential point that VX is set by Vb1 and gives no resulting condition on Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 25743,
        "total_tokens": 28308,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25380,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 25743,
        "total_tokens": 28308,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25380,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_2\\) is the upper PMOS, its source is at \\(V_{DD}\\), its gate is at \\(V_{b2}\\), and its drain is node \\(X\\).\n\nFor a PMOS to be in saturation,\n\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP}|\n\\]\n\nwith \\(V_{SG2}>|V_{TP}|\\). Here,\n\n\\[\nV_{SD2}=V_{DD}-V_X,\\qquad\nV_{SG2}=V_{DD}-V_{b2}.\n\\]\n\nTherefore,\n\n\\[\nV_{DD}-V_X\\ge V_{DD}-V_{b2}-|V_{TP}|\n\\]\n\nor equivalently,\n\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP}|}.\n\\]\n\nThus, choose \\(V_{b2}\\) and the bias conditions so that the maximum DC value of \\(X\\) remains below \\(V_{b2}+|V_{TP}|\\), with some margin, while also keeping\n\n\\[\nV_{DD}-V_{b2}>|V_{TP|}\n\\]\n\nso that \\(M_2\\) remains turned on. The check must be made at the DC operating point and over the expected process, temperature, and output-voltage range.\n\nIf \\(M_2\\) is intended to be an NMOS instead, use the corresponding condition \\(V_{DS2}\\ge V_{GS2}-V_{TN}\\).",
        "format": "markdown",
        "sha256": "9fce2d68e0565ce58608e6095bf934a3a693e83f8a0b51cc1daf1385cb7d0792"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The PMOS saturation condition is correct, but the answer treats Vb2 as the control and does not relate VX to Vb1, which sets VX through M1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 14307,
        "total_tokens": 16872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 14307,
        "total_tokens": 16872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the devices are pMOS transistors as drawn, \\(M_2\\)'s source is at \\(V_{DD}\\), its drain is at \\(X\\), and its gate is at \\(V_{b2}\\).\n\nFor \\(M_2\\) to be on and in saturation:\n\n\\[\nV_{SG2}>|V_{TP2}|\n\\]\n\nand\n\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP2}|.\n\\]\n\nSubstituting the node voltages,\n\n\\[\nV_{DD}-V_X\n\\ge\nV_{DD}-V_{b2}-|V_{TP2}|,\n\\]\n\nso the saturation condition becomes\n\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|}.\n\\]\n\nThus, choose the bias \\(V_{b2}\\), or otherwise control the operating point, so that the maximum expected voltage at \\(X\\) stays below \\(V_{b2}+|V_{TP2}|\\), preferably with some margin. Also ensure that \\(M_2\\) remains on:\n\n\\[\n\\boxed{V_{DD}-V_{b2}>|V_{TP2}|}.\n\\]\n\nAt equality, \\(M_2\\) is at the edge of saturation; it should be biased with additional margin for process, temperature, and signal variations.",
        "format": "markdown",
        "sha256": "d357604aaceb8427070f436c21b92579f93edcd9cb559a9f89b244ac7598e790"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The PMOS saturation inequality for M2 is correct, but the answer treats Vb2 as the control and misses that VX is set mainly by Vb1 through M1; it therefore gives no required condition on Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 14795,
        "total_tokens": 17360,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 14795,
        "total_tokens": 17360,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS cascode amplifier**. \\(M_1\\) is the common-source device and \\(M_2\\) is the common-gate cascode device. The current source \\(I_1\\) acts as the active load.\n\nAssume both MOSFETs are in saturation and neglect body effect and capacitances.\n\n### DC bias\n\nThe same dc current flows through both transistors:\n\n\\[\nI_{D1}=I_{D2}=I_1.\n\\]\n\nLet \\(V_{OVi}=V_{GSi}-V_{Ti}\\). If channel-length modulation is neglected,\n\n\\[\nI_1=\\frac{1}{2}k_1V_{OV1}^2\n=\\frac{1}{2}k_2V_{OV2}^2.\n\\]\n\nSince the gate of \\(M_2\\) is biased at \\(V_{b1}\\),\n\n\\[\nV_X=V_{b1}-V_{T2}-V_{OV2}.\n\\]\n\nFor proper saturation,\n\n\\[\nV_X\\ge V_{OV1}\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nV_{out}-V_X\\ge V_{OV2}\n\\]\n\nfor \\(M_2\\). Thus the output must satisfy approximately\n\n\\[\nV_{out}\\ge V_{b1}-V_{T2}.\n\\]\n\nThe upper output limit is set by the compliance voltage of the current source.\n\n---\n\n## Small-signal voltage gain\n\nLet \\(v_i\\), \\(v_x\\), and \\(v_o\\) denote small-signal voltages. Since \\(V_{DD}\\) and \\(V_{b1}\\) are ac grounds,\n\n\\[\nv_{gs2}=-v_x.\n\\]\n\nUsing \\(g_{mi}\\) and \\(r_{oi}\\) for the transistor parameters,\n\n\\[\ni_{d1}=g_{m1}v_i+\\frac{v_x}{r_{o1}},\n\\]\n\nand\n\n\\[\ni_{d2}=\\frac{v_o-v_x}{r_{o2}}-g_{m2}v_x.\n\\]\n\nFor an ideal current source, \\(I_1\\) is an open circuit in the small-signal circuit. Therefore no ac current can flow at the output, so\n\n\\[\ni_{d2}=0.\n\\]\n\nSince \\(M_1\\) and \\(M_2\\) are in series, this also gives \\(i_{d1}=0\\). Hence,\n\n\\[\nv_x=-g_{m1}r_{o1}v_i\n\\]\n\nand\n\n\\[\nv_o=(1+g_{m2}r_{o2})v_x.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\n=-g_{m1}r_{o1}\\left(1+g_{m2}r_{o2}\\right)\n}\n\\]\n\nor, for \\(g_mr_o\\gg 1\\),\n\n\\[\n\\boxed{\nA_v\\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n}\n\\]\n\nThe negative sign indicates inversion: increasing \\(v_i\\) increases the current in \\(M_1\\), causing \\(v_{out}\\) to decrease.\n\n---\n\n## Output resistance\n\nLooking into the drain of \\(M_2\\), the cascode stack has output resistance\n\n\\[\n\\boxed{\nR_{\\text{cas}}\n=r_{o2}+r_{o1}+g_{m2}r_{o1}r_{o2}\n}\n\\]\n\nor equivalently,\n\n\\[\nR_{\\text{cas}}=r_{o2}+r_{o1}(1+g_{m2}r_{o2}).\n\\]\n\nFor an ideal current-source load,\n\n\\[\n\\boxed{R_{out}=R_{\\text{cas}}}.\n\\]\n\nIf the current source has finite output resistance \\(r_{oI}\\), then\n\n\\[\nR_{out}=R_{\\text{cas}}\\parallel r_{oI}.\n\\]\n\nThe cascode greatly increases output resistance compared with a single transistor, since typically\n\n\\[\nR_{\\text{cas}}\\approx g_{m2}r_{o1}r_{o2}.\n\\]\n\nThe intrinsic input resistance is ideally infinite because the input is applied to the MOS gate.\n\nIf body effect is included, replace \\(g_{m2}\\) in the above expressions by approximately \\(g_{m2}+g_{mb2}\\).",
        "format": "markdown",
        "sha256": "7239fb8aa7fdb3e93299083d6ab88b9b47d1be81d1ad5d17956dc5ae2d962854"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the ideal-load gain equivalent to the golden expression. Neglecting body effect is explicitly acceptable.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 26336,
        "total_tokens": 27638,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25380,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 26336,
        "total_tokens": 27638,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25380,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS cascode common-source amplifier**. \\(M_1\\) is the input transistor, \\(M_2\\) is the cascode transistor, and \\(I_1\\) is the active load.\n\nAssume both transistors operate in saturation and neglect body effect initially.\n\n## 1. DC operating point\n\nSince the transistors are in series,\n\n\\[\nI_{D1}=I_{D2}=I_1 .\n\\]\n\nLet the dc voltage at node \\(X\\) be \\(V_X\\). Using the square-law model,\n\n\\[\nI_1=\\frac{1}{2}\\beta_1(V_{in,Q}-V_{T1})^2\n\\]\n\nand\n\n\\[\nI_1=\\frac{1}{2}\\beta_2(V_{b1}-V_X-V_{T2})^2 .\n\\]\n\nThus, defining the overdrive voltages\n\n\\[\nV_{OV1}=\\sqrt{\\frac{2I_1}{\\beta_1}},\n\\qquad\nV_{OV2}=\\sqrt{\\frac{2I_1}{\\beta_2}},\n\\]\n\nwe have approximately\n\n\\[\nV_{in,Q}=V_{T1}+V_{OV1}\n\\]\n\nand\n\n\\[\nV_{b1}=V_X+V_{T2}+V_{OV2}.\n\\]\n\nFor both transistors to remain saturated,\n\n\\[\nV_X\\geq V_{OV1}\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nV_{out}\\geq V_X+V_{OV2}\n\\]\n\nfor \\(M_2\\). Equivalently, the minimum output voltage is\n\n\\[\nV_{out,\\min}=V_{b1}-V_{T2}.\n\\]\n\nIf the internal node is biased near its minimum value, \\(V_X\\approx V_{OV1}\\), then\n\n\\[\nV_{out,\\min}\\approx V_{OV1}+V_{OV2}.\n\\]\n\nThe upper output limit is set by the compliance voltage of the current source, approximately\n\n\\[\nV_{out,\\max}\\approx V_{DD}-V_{\\text{headroom of }I_1}.\n\\]\n\n---\n\n## 2. Small-signal operation\n\nLet\n\n\\[\ng_{mi}=\\frac{\\partial I_{Di}}{\\partial V_{GSi}},\n\\qquad\ng_{oi}=\\frac{1}{r_{oi}}.\n\\]\n\nThe gate of \\(M_2\\) is fixed, so it is at ac ground. Let \\(v_x\\) and \\(v_o\\) denote the small-signal voltages at \\(X\\) and the output.\n\nFor an ideal current source, its small-signal resistance is infinite. The small-signal node equations are\n\n\\[\n(g_{o1}+g_{o2}+g_{m2})v_x-g_{o2}v_o\n=-g_{m1}v_{in}\n\\]\n\nand\n\n\\[\n-(g_{m2}+g_{o2})v_x+g_{o2}v_o=0.\n\\]\n\nSolving gives the voltage gain\n\n\\[\nA_v=\\frac{v_o}{v_{in}}\n=\n-\\frac{g_{m1}(g_{m2}+g_{o2})}{g_{o1}g_{o2}}.\n\\]\n\nIn terms of \\(r_o\\),\n\n\\[\n\\boxed{\nA_v=-g_{m1}r_{o1}\\left(1+g_{m2}r_{o2}\\right)\n}\n\\]\n\nfor an ideal current-source load.\n\nIf \\(g_{m2}r_{o2}\\gg 1\\), this becomes\n\n\\[\n\\boxed{\nA_v\\approx -g_{m1}g_{m2}r_{o1}r_{o2}\n}\n\\]\n\nwhich is the usual high-gain cascode result.\n\nThe negative sign indicates an inverting voltage gain: increasing \\(v_{in}\\) increases the current pulled through the stack and therefore decreases \\(v_{out}\\).\n\n---\n\n## 3. Output resistance\n\nLooking into the output with the input ac-grounded, the resistance of the cascode transistor stack is\n\n\\[\nR_{\\text{cas}}\n=\nr_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}.\n\\]\n\nUsually the last term dominates:\n\n\\[\n\\boxed{\nR_{\\text{cas}}\\approx g_{m2}r_{o1}r_{o2}\n}\n\\]\n\nThus, the cascode greatly increases the output resistance compared with a single common-source transistor.\n\nIf the current source has finite output resistance \\(r_{oI}\\), and an external load \\(R_L\\) is connected, then\n\n\\[\n\\boxed{\nR_{out}=R_{\\text{cas}}\\parallel r_{oI}\\parallel R_L\n}\n\\]\n\nand approximately\n\n\\[\nA_v\\approx -g_{m1}R_{out}.\n\\]\n\nFor an ideal current source and no external load, \\(r_{oI}\\to\\infty\\), so \\(R_{out}=R_{\\text{cas}}\\).\n\nThe input resistance is ideally very large because the input is applied to the MOS gate.\n\nIf body effect in \\(M_2\\) is included, replace \\(g_{m2}\\) in the above expressions by approximately\n\n\\[\ng_{m2}+g_{mb2}.\n\\]",
        "format": "markdown",
        "sha256": "f650c8f34e870fadf3b93929ab6504890397982b961e7efdfc1fd547a0e5c492"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the input NMOS and M2 as the cascode with its gate AC-grounded, and derives the ideal-load gain equivalent to the golden expression. Omitting body effect is allowed.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 17209,
        "total_tokens": 18511,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 17209,
        "total_tokens": 18511,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS **cascode voltage amplifier**. \\(M_1\\) is the common-source device and \\(M_2\\), whose gate is fixed at \\(V_{b1}\\), is the common-gate cascode device.\n\nAssume both MOSFETs are in saturation, \\(V_{DD}\\) is an ac ground, and \\(I_1\\) is an ideal current source.\n\n### DC operating point\n\nThe same dc current flows through both devices:\n\n\\[\nI_{D1}=I_{D2}=I_1.\n\\]\n\nIgnoring channel-length modulation, define\n\n\\[\nV_{OVi}=V_{GSi}-V_{Ti}, \\qquad\nI_1=\\frac{1}{2}\\beta_iV_{OVi}^2.\n\\]\n\nThus,\n\n\\[\nV_{IN,Q}=V_{T1}+V_{OV1}\n\\]\n\nand\n\n\\[\nV_X=V_{b1}-V_{T2}-V_{OV2}.\n\\]\n\nFor saturation,\n\n\\[\nV_X\\ge V_{OV1}\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nV_{out}\\ge V_X+V_{OV2}\n\\]\n\nfor \\(M_2\\). Hence the minimum output voltage is approximately\n\n\\[\nV_{out,\\min}=V_X+V_{OV2}\n             =V_{b1}-V_{T2}.\n\\]\n\nThe upper output limit is set by the compliance voltage of the current source, typically\n\n\\[\nV_{out,\\max}\\simeq V_{DD}-V_{\\text{headroom of }I_1}.\n\\]\n\nWith an ideal current source and no channel-length modulation, the dc value of \\(V_{out}\\) is not uniquely fixed; it can lie anywhere in the valid compliance range.\n\n---\n\n### Small-signal voltage gain\n\nLet\n\n\\[\ng_{mi}=\\frac{\\partial I_{Di}}{\\partial V_{GSi}},\n\\qquad\nr_{oi}=\\frac{1}{g_{oi}}.\n\\]\n\nFor the cascode device, \\(v_{g2}=0\\), so its small-signal drain current is\n\n\\[\ni_{d2}=g_{o2}v_{out}-(g_{m2}+g_{o2})v_X.\n\\]\n\nSince the ideal current source is an open circuit for small signal, the output-node current must be zero:\n\n\\[\ni_{d2}=0.\n\\]\n\nTherefore,\n\n\\[\nv_{out}=(1+g_{m2}r_{o2})v_X.\n\\]\n\nAt node \\(X\\),\n\n\\[\ng_{m1}v_{in}+g_{o1}v_X-i_{d2}=0.\n\\]\n\nSince \\(i_{d2}=0\\),\n\n\\[\nv_X=-g_{m1}r_{o1}v_{in}.\n\\]\n\nConsequently, the voltage gain is\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=-g_{m1}r_{o1}(1+g_{m2}r_{o2})\n}\n\\]\n\nor, equivalently,\n\n\\[\nA_v=-g_{m1}\\left(r_{o1}+g_{m2}r_{o1}r_{o2}\\right).\n\\]\n\nFor \\(g_{m2}r_{o2}\\gg 1\\),\n\n\\[\n\\boxed{\nA_v\\simeq -g_{m1}g_{m2}r_{o1}r_{o2}\n}\n\\]\n\nso the cascode increases the gain by approximately a factor of \\(g_{m2}r_{o2}\\) compared with a single common-source stage.\n\n---\n\n### Output resistance\n\nSet \\(v_{in}=0\\) and apply a test voltage at the output. The resistance looking into the drain of \\(M_2\\) is\n\n\\[\n\\boxed{\nR_{out,\\text{cascode}}\n=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n}\n\\]\n\nand for \\(g_{m2}r_{o1}r_{o2}\\) dominant,\n\n\\[\n\\boxed{\nR_{out,\\text{cascode}}\\simeq g_{m2}r_{o1}r_{o2}.\n}\n\\]\n\nIf the current source has finite output resistance \\(r_{oI}\\), then\n\n\\[\nR_{out,\\text{total}}\n=\nR_{out,\\text{cascode}}\\parallel r_{oI}.\n\\]\n\nAn external load \\(R_L\\) is also in parallel with this resistance.\n\n---\n\n### Input resistance\n\nNeglecting gate leakage and bias-network loading,\n\n\\[\n\\boxed{R_{in}\\rightarrow\\infty.}\n\\]\n\nThus, the stage provides high voltage gain, high output resistance, and voltage inversion. If body effect is important, replace \\(g_{m2}\\) in the above expressions by \\(g_{m2}+g_{mb2}\\).",
        "format": "markdown",
        "sha256": "d1d84e068b8dc2ecaf5d4b4c34ea6492cd9304be6dc20ac7670f89e0a0c28e95"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the ideal-current-source gain equivalent to the accepted expression. Omitting body effect in the main derivation is explicitly allowed.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 31966,
        "total_tokens": 33268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30896,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 31966,
        "total_tokens": 33268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30896,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. It is an **NMOS cascode amplifier**:\n\n- \\(M_1\\): common-source input transistor, driven by \\(V_{in}\\)\n- \\(M_2\\): common-gate cascode transistor, with its gate held at the bias voltage \\(V_{b1}\\)\n- \\(R_D\\): drain load\n- \\(V_{out}\\): taken at the drain of \\(M_2\\)\n\nWith \\(V_{b1}\\) held as an AC-fixed bias, \\(M_2\\) reduces the signal swing at \\(M_1\\)'s drain, increasing the output resistance and voltage gain.",
        "format": "markdown",
        "sha256": "461b0918203da6e35e0f13c2a4513d237c541b77ab0e6a4c92919f817f03d1e7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Incorrectly identifies the circuit as a cascode. M1 is a PMOS source follower, not a common-source input device, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 654,
        "total_tokens": 2030,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 654,
        "total_tokens": 2030,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. It is an **NMOS cascode amplifier**:\n\n- \\(M_1\\) is the lower **common-source** transistor, driven by \\(V_{in}\\).\n- \\(M_2\\) is the upper **common-gate** transistor, with its gate fixed at the bias voltage \\(V_{b1}\\).\n- \\(R_D\\) is the drain load, and \\(V_{out}\\) is taken at the drain of \\(M_2\\).\n\nThe cascode arrangement keeps the voltage at \\(M_1\\)'s drain relatively constant, increasing the output resistance and typically improving gain and reducing Miller-effect feedback. \\(V_{b1}\\) must be chosen so that \\(M_2\\) remains properly biased, usually in saturation.",
        "format": "markdown",
        "sha256": "c27d3c3842b51c6b6006403815314188c53d11fd0c08fb7f7dc2c8d4204af1b1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a common-source NMOS; M1 is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 680,
        "total_tokens": 2056,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 680,
        "total_tokens": 2056,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. It is a **standard NMOS cascode amplifier**.\n\n- \\(M_1\\) is the lower **common-source** transistor, driven by \\(V_{in}\\).\n- \\(M_2\\) is the upper **common-gate** transistor, with its gate fixed at the bias voltage \\(V_{b1}\\).\n- The source of \\(M_2\\) is connected to the drain of \\(M_1\\), and \\(V_{out}\\) is taken from the drain of \\(M_2\\).\n- \\(R_D\\) is the load connected to \\(V_{DD}\\).\n\nWhen biased properly, \\(M_2\\) keeps the drain voltage of \\(M_1\\) relatively constant, increasing the output resistance and voltage gain while reducing the effect of the Miller capacitance.",
        "format": "markdown",
        "sha256": "dba954a2d85a3d9e4d4ec4469e87d0e3f942ac67ba808e2fdb66519f48bc0cfe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a common-source NMOS; M1 is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 691,
        "total_tokens": 2067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 691,
        "total_tokens": 2067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is caused mainly by the gate–drain capacitance \\(C_{gd}\\). In a common-source stage, the drain voltage has a large, inverted swing relative to the gate, so the input sees an effective capacitance\n\n\\[\nC_{\\text{in}} \\approx C_{gd}(1-A_v)\n\\]\n\nwhere \\(A_v\\) is the voltage gain from gate to drain. Since \\(A_v\\) is large and negative, this becomes approximately\n\n\\[\nC_{\\text{in}} \\approx C_{gd}(1+|A_v|),\n\\]\n\nwhich can be much larger than the physical capacitance.\n\nIn a cascode, the lower transistor’s drain is connected to the source of a common-gate transistor. That source has a relatively low small-signal impedance, so the lower transistor’s drain voltage is held nearly constant. Consequently:\n\n- The voltage across the lower transistor’s \\(C_{gd}\\) changes much less.\n- The large output voltage swing is isolated from the input transistor.\n- The gain relevant to Miller multiplication is the small gain from the input gate to the intermediate drain node, not the large overall cascode gain.\n\nThus, the input capacitance is much less multiplied, and the cascode has a higher bandwidth and smaller input loading. The effect is reduced, not eliminated, because finite transistor output resistance and parasitic capacitances still allow some voltage variation.",
        "format": "markdown",
        "sha256": "625ec3cac357e0ac1659cb2d6f8fd23648a44ef048a3da73231461161af7b96b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the reduced gain across the input transistor’s Cgd, separating it from the full output gain. Saying the node is nearly constant slightly overstates the effect, but the core explanation is correct.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1328,
        "total_tokens": 1347,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1328,
        "total_tokens": 1347,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect occurs when a feedback capacitance, such as a transistor’s \\(C_{bc}\\) or \\(C_{gd}\\), connects the input to a node having a large, opposite-phase voltage swing.\n\nFor a single common-emitter or common-source stage,\n\n\\[\nC_{\\text{in,eq}}=C_f(1-A_v)\n\\]\n\nwhere \\(A_v\\) is the voltage gain. Since \\(A_v\\) is usually large and negative,\n\n\\[\nC_{\\text{in,eq}}\\approx C_f(1+|A_v|),\n\\]\n\nso the small transistor capacitance appears much larger at the input.\n\nIn a cascode, the output of the lower transistor is connected to the emitter/source of an upper common-base/common-gate transistor. That node has a low small-signal impedance, approximately \\(1/g_m\\), so its voltage does not experience the large output swing of a single-stage amplifier. Therefore, the lower transistor’s \\(C_{bc}\\) or \\(C_{gd}\\) sees little voltage amplification across it, and its effective Miller multiplication is much smaller.\n\nThe cascode still provides high overall voltage gain, but that gain occurs mainly in the upper transistor and is isolated from the input transistor’s feedback capacitance. Thus, the Miller effect is reduced—not eliminated—improving high-frequency bandwidth.",
        "format": "markdown",
        "sha256": "a68cea10610ccc65a8439f308eb805089f93b1ed27c9e799275ca989067dfdc4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the low-impedance cascode node and why the lower transistor’s capacitance sees less Miller multiplication than in a common-source stage. However, saying it sees “little voltage amplification” overstates the reduction: the gain across Cgd is typically about 2 in magnitude, not negligible.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 4942,
        "total_tokens": 4961,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 4942,
        "total_tokens": 4961,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect comes from a capacitance between an input and an output node, such as the gate-drain capacitance \\(C_{gd}\\) of a MOSFET. In a common-source stage,\n\n\\[\nC_{\\text{in,eff}} \\approx C_{gd}(1-A_v)\n\\]\n\nand since \\(A_v\\) is large and negative,\n\n\\[\nC_{\\text{in,eff}} \\approx C_{gd}(1+|A_v|).\n\\]\n\nThus, the large, inverted output swing greatly increases the capacitance seen at the input.\n\nIn a cascode, the drain of the lower, input transistor is connected to the source of an upper common-gate transistor. The common-gate device presents a relatively low impedance at this intermediate node, so the lower transistor’s drain voltage varies only modestly. The large output voltage swing occurs mainly at the drain of the upper transistor, not directly across the lower transistor’s gate-drain capacitance.\n\nTherefore, for the lower transistor,\n\n\\[\nC_{\\text{in,eff}}=C_{gd1}\\left(1-\\frac{v_x}{v_i}\\right),\n\\]\n\nwhere \\(v_x\\) is the intermediate-node voltage. The gain \\(v_x/v_i\\) is only of order unity, rather than the large overall cascode gain. The Miller multiplication is consequently much smaller.\n\nSo, the cascode effectively **shields the input transistor from the output voltage swing**. The Miller effect is reduced, though not eliminated, because the intermediate node still has some finite voltage variation.",
        "format": "markdown",
        "sha256": "6ec160ca4ab6f20ccdf328e69b76a3bddd1a5df1df42b97a33034a002b0ed706"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance intermediate node, which keeps the lower transistor’s drain swing and gain across its Cgd modest compared with the full cascode gain. It also correctly says the Miller effect is reduced but not eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 3953,
        "total_tokens": 3972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 3953,
        "total_tokens": 3972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the lower transistor is drawn rotated, \\(V_{\\text{in}}\\) is applied to the **source** of \\(M_2\\), while \\(V_{b1}\\) is its gate bias.\n\nThus:\n\n- \\(M_1\\): pMOS active load, source at \\(V_{DD}\\), gate at \\(V_{b2}\\)\n- \\(M_2\\): nMOS common-gate transistor, source driven by \\(V_{\\text{in}}\\), gate at \\(V_{b1}\\)\n- The drains of \\(M_1\\) and \\(M_2\\) are connected at \\(V_{\\text{out}}\\)\n\nThis is a **common-gate amplifier with a pMOS current-source load**.\n\n## DC bias\n\nLet the dc input be \\(V_{IN,Q}\\). Define\n\n\\[\nV_{OV1}=V_{DD}-V_{b2}-|V_{TP}|\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nV_{OV2}=V_{b1}-V_{IN,Q}-V_{TN}\n\\]\n\nfor \\(M_2\\).\n\nNeglecting channel-length modulation,\n\n\\[\nI_{D1}\\simeq \\frac{1}{2}\\beta_1V_{OV1}^{2},\n\\qquad\nI_{D2}\\simeq \\frac{1}{2}\\beta_2V_{OV2}^{2}.\n\\]\n\nAt the quiescent point,\n\n\\[\nI_{D1}=I_{D2}=I_Q.\n\\]\n\nFor both transistors to remain in saturation,\n\n\\[\nV_{\\text{out}}-V_{IN,Q}\\ge V_{OV2}\n\\]\n\nfor \\(M_2\\), and\n\n\\[\nV_{DD}-V_{\\text{out}}\\ge V_{OV1}\n\\]\n\nfor \\(M_1\\). Therefore,\n\n\\[\n\\boxed{V_{IN,Q}+V_{OV2}\\le V_{\\text{out}}\\le V_{DD}-V_{OV1}}\n\\]\n\nis the approximate output-voltage compliance range.\n\nWith ideal saturation models and no output load, the dc output voltage is not uniquely determined; finite output resistance or an external load determines it.\n\n## Small-signal voltage gain\n\nFor small signals, \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are ac grounds. Let \\(v_i\\) and \\(v_o\\) be the small-signal input and output voltages.\n\nFor \\(M_2\\),\n\n\\[\nv_{gs2}=-v_i,\\qquad v_{ds2}=v_o-v_i.\n\\]\n\nThe small-signal output-node equation is\n\n\\[\ng_{o1}v_o+g_{o2}(v_o-v_i)-g_{m2}v_i+G_Lv_o=0,\n\\]\n\nwhere \\(G_L=1/R_L\\) represents any external load. Hence,\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\n=\\frac{g_{m2}+g_{o2}}\n{g_{o1}+g_{o2}+G_L}\n}\n\\]\n\nor, using \\(r_o=1/g_o\\),\n\n\\[\n\\boxed{\nA_v\\simeq +g_{m2}\n\\left(r_{o1}\\parallel r_{o2}\\parallel R_L\\right)\n}\n\\]\n\nwhen \\(g_{m2}\\gg g_{o2}\\).\n\nThe gain is **positive**, so the common-gate stage is noninverting. Increasing \\(V_{\\text{in}}\\) raises the source voltage of \\(M_2\\), reducing its \\(V_{GS}\\) and drain current; the output voltage consequently rises.\n\nIf body effect is significant, replace \\(g_{m2}\\) by\n\n\\[\ng_{m2}+g_{mb2}.\n\\]\n\nThe \\(g_{m1}\\) of \\(M_1\\) does not appear because its gate and source are both at ac ground; \\(M_1\\) contributes mainly its output resistance.\n\n## Input and output resistance\n\nThe input is applied to the source of \\(M_2\\), so the input resistance is low:\n\n\\[\n\\boxed{R_{\\text{in}}\\simeq \\frac{1}{g_{m2}}}\n\\]\n\nor approximately\n\n\\[\nR_{\\text{in}}\\simeq \\frac{1}{g_{m2}+g_{mb2}}\n\\]\n\nwhen body effect is included.\n\nIncluding \\(r_{o2}\\), and with \\(R_D=r_{o1}\\parallel R_L\\),\n\n\\[\nR_{\\text{in}}\n\\simeq \\frac{r_{o2}+R_D}{1+g_{m2}r_{o2}}.\n\\]\n\nWith the input source set to ac ground, the output resistance is\n\n\\[\n\\boxed{R_{\\text{out}}\\simeq r_{o1}\\parallel r_{o2}}\n\\]\n\nand the loaded output resistance is \\(R_{\\text{out}}\\parallel R_L\\).\n\nThus, the circuit provides a noninverting voltage gain, relatively low input resistance, and relatively high output resistance.",
        "format": "markdown",
        "sha256": "ab8b550f36a58f53933ecd8620550916be493d8c214966e0ee326f4a637c61c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with a PMOS current-source load, places the input at M2’s source, and gives the non-inverting gain and low input resistance. Its gain expression is equivalent to the required approximation; the additional details do not contradict the topology or gain mechanism.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 31299,
        "total_tokens": 32523,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30206,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 31299,
        "total_tokens": 32523,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30206,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the transistor symbols are read in the usual way:\n\n- \\(M_1\\): pMOS load, with source at \\(V_{DD}\\), gate at \\(V_{b2}\\), and drain at \\(V_{\\text{out}}\\).\n- \\(M_2\\): nMOS common-gate transistor, with gate at \\(V_{b1}\\), source driven by \\(V_{\\text{in}}\\), and drain at \\(V_{\\text{out}}\\).\n\nThus, the circuit is a **common-gate amplifier with an active pMOS load**.\n\n## 1. DC bias conditions\n\nLet the dc input and output voltages be \\(V_{I,Q}\\) and \\(V_{O,Q}\\).\n\nFor \\(M_2\\),\n\n\\[\nV_{GS2}=V_{b1}-V_{I,Q}\n\\]\n\nand its overdrive voltage is\n\n\\[\nV_{OV2}=V_{b1}-V_{I,Q}-V_{TN}.\n\\]\n\nFor \\(M_1\\),\n\n\\[\nV_{SG1}=V_{DD}-V_{b2}\n\\]\n\nand\n\n\\[\nV_{OV1}=V_{DD}-V_{b2}-|V_{TP}|.\n\\]\n\nFor both transistors to be on and in saturation,\n\n\\[\nV_{b1}-V_{TN}\\leq V_{O,Q}\\leq V_{b2}+|V_{TP}|.\n\\]\n\nThe dc current must satisfy\n\n\\[\nI_Q=I_{D2}=I_{D1}.\n\\]\n\nNeglecting channel-length modulation,\n\n\\[\nI_Q\n=\\frac{1}{2}\\beta_2\n\\left(V_{b1}-V_{I,Q}-V_{TN}\\right)^2\n\\]\n\nand\n\n\\[\nI_Q\n=\\frac{1}{2}\\beta_1\n\\left(V_{DD}-V_{b2}-|V_{TP}|\\right)^2,\n\\]\n\nwhere \\(\\beta_i=\\mu_i C_{\\text{ox}}(W/L)_i\\).\n\nThe bias voltages must therefore be selected so that these two currents are equal.\n\n---\n\n## 2. Small-signal voltage gain\n\nFor small-signal analysis, \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are ac grounds.\n\nDefine\n\n\\[\ng_{oi}=\\frac{1}{r_{oi}}.\n\\]\n\nSince the gate and source of \\(M_1\\) are both at ac ground, \\(M_1\\) contributes only its output resistance \\(r_{o1}\\). Its \\(g_m\\) does not contribute to the gain.\n\nFor \\(M_2\\),\n\n\\[\nv_{gs2}=-v_{\\text{in}}, \\qquad\nv_{ds2}=v_{\\text{out}}-v_{\\text{in}}.\n\\]\n\nWriting KCL at the output node,\n\n\\[\ng_{o1}v_{\\text{out}}\n+g_{o2}(v_{\\text{out}}-v_{\\text{in}})\n-g_{m2}v_{\\text{in}}=0.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n\\frac{g_{m2}+g_{o2}}{g_{o1}+g_{o2}}\n}\n\\]\n\nor, in the usual approximation \\(g_{m2}\\gg g_{o2}\\),\n\n\\[\n\\boxed{\nA_v\\simeq g_{m2}(r_{o1}\\parallel r_{o2})\n}\n\\]\n\nThe gain is **positive**. Increasing \\(v_{\\text{in}}\\) raises the source voltage of \\(M_2\\), reducing \\(V_{GS2}\\) and its drain current. The pMOS load then pulls the output upward.\n\nIf body effect is included, replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\):\n\n\\[\nA_v\\simeq\n(g_{m2}+g_{mb2})(r_{o1}\\parallel r_{o2}).\n\\]\n\n---\n\n## 3. Input resistance\n\nThe input is applied to the source of \\(M_2\\), so the common-gate stage has a low input resistance.\n\nNeglecting \\(r_o\\) effects,\n\n\\[\n\\boxed{\nR_{\\text{in}}\\simeq \\frac{1}{g_{m2}}\n}\n\\]\n\nor, including body effect,\n\n\\[\n\\boxed{\nR_{\\text{in}}\\simeq \\frac{1}{g_{m2}+g_{mb2}}.\n}\n\\]\n\nIncluding \\(r_{o1}\\) and \\(r_{o2}\\), the more exact result is\n\n\\[\n\\boxed{\nR_{\\text{in}}\n=\n\\frac{r_{o1}+r_{o2}}\n{1+g_{m2}r_{o2}}\n}\n\\]\n\nwith \\(g_{m2}\\) replaced by \\(g_{m2}+g_{mb2}\\) if body effect is included.\n\n---\n\n## 4. Output resistance\n\nWith the input voltage set to zero, the source of \\(M_2\\) is at ac ground. Hence the output sees the two transistor output resistances in parallel:\n\n\\[\n\\boxed{\nR_{\\text{out}}\\simeq r_{o1}\\parallel r_{o2}.\n}\n\\]\n\nIf an external load \\(R_L\\) is connected, then\n\n\\[\nR_{\\text{out,total}}\n=\nr_{o1}\\parallel r_{o2}\\parallel R_L\n\\]\n\nand approximately\n\n\\[\nA_v\\simeq g_{m2}\n(r_{o1}\\parallel r_{o2}\\parallel R_L).\n\\]\n\nSo the circuit is a **noninverting common-gate amplifier**, biased by \\(V_{b1}\\) and \\(V_{b2}\\), with low input resistance and a gain set mainly by \\(g_{m2}\\) and the output resistance of the two transistors.",
        "format": "markdown",
        "sha256": "b70d9c2bc4c4568d02f11dd715357b5ac3be083882b9ead655cefa8b5844c740"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, identifies the bias voltages, and gives the non-inverting gain and low input resistance. Its gain expression is equivalent to the required result; the additional detail is consistent with the topology.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 20961,
        "total_tokens": 22185,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 20961,
        "total_tokens": 22185,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-gate NMOS amplifier with a PMOS active load**:\n\n- \\(M_1\\): PMOS, source at \\(V_{DD}\\), gate at \\(V_{b2}\\), drain at \\(V_{\\text{out}}\\).\n- \\(M_2\\): NMOS, gate at \\(V_{b1}\\), source driven by \\(V_{\\text{in}}\\), drain at \\(V_{\\text{out}}\\).\n\nAssume the bias sources are ideal AC grounds and neglect body effect initially.\n\n## 1. DC operation\n\nThe overdrive voltages are\n\n\\[\nV_{OV1}=V_{DD}-V_{b2}-|V_{TP}|\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nV_{OV2}=V_{b1}-V_{\\text{in}}-V_{TN}\n\\]\n\nfor \\(M_2\\).\n\nThe devices conduct if\n\n\\[\nV_{DD}-V_{b2}>|V_{TP}|\n\\]\n\nand\n\n\\[\nV_{b1}-V_{\\text{in}}>V_{TN}.\n\\]\n\nIf both transistors are in saturation, their currents must be equal:\n\n\\[\nI_{D1}=I_{D2}=I_Q.\n\\]\n\nUsing the square-law model,\n\n\\[\nI_Q=\\frac{1}{2}\\beta_{p1}\n\\left(V_{DD}-V_{b2}-|V_{TP}|\\right)^2\n\\]\n\nand\n\n\\[\nI_Q=\\frac{1}{2}\\beta_{n2}\n\\left(V_{b1}-V_{\\text{in}}-V_{TN}\\right)^2.\n\\]\n\nThus, the input bias voltage required for the desired current is\n\n\\[\nV_{\\text{in},Q}\n=\nV_{b1}-V_{TN}\n-\\sqrt{\\frac{\\beta_{p1}}{\\beta_{n2}}}\n\\left(V_{DD}-V_{b2}-|V_{TP}|\\right).\n\\]\n\nThe DC current flows from \\(V_{DD}\\) through \\(M_1\\), then through \\(M_2\\), and out through the source/input terminal.\n\n## 2. Saturation conditions\n\nFor \\(M_1\\),\n\n\\[\nV_{SD1}=V_{DD}-V_{\\text{out}}\n\\ge V_{OV1},\n\\]\n\nwhich gives\n\n\\[\nV_{\\text{out}}\\le V_{b2}+|V_{TP}|.\n\\]\n\nFor \\(M_2\\),\n\n\\[\nV_{DS2}=V_{\\text{out}}-V_{\\text{in}}\n\\ge V_{OV2},\n\\]\n\nwhich gives\n\n\\[\nV_{\\text{out}}\\ge V_{b1}-V_{TN}.\n\\]\n\nTherefore, for both devices to remain saturated,\n\n\\[\n\\boxed{\nV_{b1}-V_{TN}\n\\le V_{\\text{out}}\n\\le\nV_{b2}+|V_{TP}|\n}\n\\]\n\nand \\(V_{\\text{in}}<V_{b1}-V_{TN}\\).\n\nWith the ideal square-law model and no channel-length modulation, \\(V_{\\text{out}}\\) is not uniquely determined while both devices are saturated. A finite \\(\\lambda\\), an output load, or another biasing mechanism fixes the exact output voltage. Including channel-length modulation,\n\n\\[\n\\frac{\\beta_{p1}}{2}V_{OV1}^{2}\n\\left[1+\\lambda_1(V_{DD}-V_{\\text{out}})\\right]\n=\n\\frac{\\beta_{n2}}{2}V_{OV2}^{2}\n\\left[1+\\lambda_2(V_{\\text{out}}-V_{\\text{in}})\\right].\n\\]\n\n## 3. Small-signal voltage gain\n\nLet\n\n\\[\ng_{m2}=\\beta_{n2}V_{OV2},\\qquad\ng_{oi}=\\frac{1}{r_{oi}}.\n\\]\n\nSince the gate and source of \\(M_1\\) are AC-grounded, \\(M_1\\) contributes mainly its output resistance \\(r_{o1}\\). For \\(M_2\\),\n\n\\[\nv_{gs2}=-v_{\\text{in}},\\qquad\nv_{ds2}=v_{\\text{out}}-v_{\\text{in}}.\n\\]\n\nWriting KCL at the output node gives\n\n\\[\n(g_{o1}+g_{o2})v_{\\text{out}}\n=\n(g_{m2}+g_{o2})v_{\\text{in}}.\n\\]\n\nHence,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n\\frac{g_{m2}+g_{o2}}{g_{o1}+g_{o2}}\n}\n\\]\n\nor, when \\(g_m\\gg g_o\\),\n\n\\[\n\\boxed{\nA_v\\approx g_{m2}(r_{o1}\\parallel r_{o2})\n}\n\\]\n\nIf body effect is important, replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\).\n\nThe gain is **positive**: increasing \\(V_{\\text{in}}\\) raises the source voltage of \\(M_2\\), reduces its \\(V_{GS}\\) and drain current, and causes \\(V_{\\text{out}}\\) to rise.\n\n## 4. Output and input resistance\n\nLooking into the output with the input AC-grounded,\n\n\\[\n\\boxed{\nR_{\\text{out}}\\approx r_{o1}\\parallel r_{o2}\n}\n\\]\n\nFor the source/input resistance, with only \\(M_1\\)'s finite output resistance loading the drain,\n\n\\[\nR_{\\text{in}}\n=\n\\frac{g_{o1}+g_{o2}}\n{g_{o1}(g_{m2}+g_{o2})}.\n\\]\n\nWith a low-impedance load at the output, this approaches the usual common-gate result,\n\n\\[\nR_{\\text{in}}\\approx \\frac{1}{g_{m2}}.\n\\]\n\nThus, the circuit is a **noninverting common-gate stage**, with \\(M_1\\) providing the PMOS current-source load.",
        "format": "markdown",
        "sha256": "84eeab08cee1dca3277492d60ea3d4da9d2f2686f28e385628be3dcbe57bde5d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, and gives the non-inverting gain and an equivalent gain expression. Its input-resistance formula is also consistent with the stated load; the extra DC and resistance details do not contradict the topology.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 28783,
        "total_tokens": 30007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27452,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 28783,
        "total_tokens": 30007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27452,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**.\n\nThere are two independent dynamic nodes:\n\n1. The gate of \\(M_1\\), with \\(C_{GS}\\) and \\(C_{GD}\\).\n2. The output node, with \\(C_{DB}\\), \\(C_{DB2}\\), \\(C_{GD2}\\), and the other side of \\(C_{GD}\\).\n\nThe gate of \\(M_2\\) and the supply terminals are at ac ground, so they do not introduce additional dynamic nodes. Thus, the voltage-transfer function is generally **second order**, with **two finite poles**.",
        "format": "markdown",
        "sha256": "9711caac3cb92ecb5003686a940f349b8e810b53d9afba0967a28586a46c107b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles from the two dynamic nodes and assigns the capacitors to the gate and output, with CGD coupling the nodes.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 5826,
        "total_tokens": 7567,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 5826,
        "total_tokens": 7567,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles** (assuming the bias supplies are ideal AC grounds).\n\nThe two dynamic nodes are:\n\n1. The gate of \\(M_1\\), associated mainly with \\(C_{GS}\\) and \\(C_{GD}\\).\n2. The output node, associated with \\(C_{DB}\\), \\(C_{DB2}\\), and \\(C_{GD2}\\).\n\n\\(C_{GD}\\) couples the two nodes and shifts the pole locations through the Miller effect, but it does not introduce an additional independent pole.",
        "format": "markdown",
        "sha256": "99bacf57990ec7282edef9775530a3fee7688794b03605ef9b8d9542205d9e3d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two dynamic nodes and assigns the capacitances to the gate and output nodes appropriately; CGD couples the nodes without adding an independent pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 6329,
        "total_tokens": 8070,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 6329,
        "total_tokens": 8070,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**.\n\nThe independent dynamic nodes are:\n\n1. The input gate node of \\(M_1\\), through \\(R_S\\) and the gate capacitances.\n2. The output node, containing the drain/body and gate-drain capacitances.\n\nThe bias and supply nodes are treated as ac ground, so their capacitors do not introduce additional independent nodes. Thus, despite several parasitic capacitors, the circuit is a **second-order system with two poles**.",
        "format": "markdown",
        "sha256": "1d9b9fa7fedf027d67a72179e19271fc3d58a8585f5c1d81873f4af7b7431016"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent dynamic nodes—the M1 gate and output—and treats the bias and supply nodes as AC ground. The gate-drain capacitance couples these nodes without adding a third pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 6320,
        "total_tokens": 8061,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 6320,
        "total_tokens": 8061,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are matched enhancement-mode NMOS transistors, with threshold voltage \\(V_T\\), parameter\n\n\\[\n\\beta=\\mu_n C_{\\mathrm{ox}}\\frac WL,\n\\]\n\nand neglect channel-length modulation and body effect.\n\nLet \\(V_X\\) be the node between \\(M_1\\) and \\(M_2\\), and define\n\n\\[\nu=V_{in}-V_T.\n\\]\n\nThe current through all elements is\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}.\n\\]\n\n## Operating regions\n\nFor \\(M_1\\),\n\n\\[\nV_{GS1}=V_{in},\\qquad V_{DS1}=V_X.\n\\]\n\nThus \\(M_1\\) is saturated only if\n\n\\[\nV_X\\geq u.\n\\]\n\nFor \\(M_2\\),\n\n\\[\nV_{GS2}=V_{in}-V_X,\\qquad V_{DS2}=V_{out}-V_X.\n\\]\n\nIt is on when\n\n\\[\nV_X<u,\n\\]\n\nand, when on, it is saturated if\n\n\\[\nV_{out}-V_X\\geq V_{in}-V_X-V_T,\n\\]\n\nor simply\n\n\\[\nV_{out}\\geq u.\n\\]\n\nTherefore, in the normal conducting state, \\(M_1\\) cannot be saturated because \\(M_2\\) requires \\(V_X<u\\). The possible conducting regions are:\n\n- \\(M_1\\) in triode and \\(M_2\\) in saturation;\n- both \\(M_1\\) and \\(M_2\\) in triode.\n\nThey cannot both be in saturation.\n\n---\n\n## 1. High-output region: \\(M_1\\) triode, \\(M_2\\) saturation\n\nFor \\(V_{out}\\geq u\\),\n\n\\[\nI_D=\\beta\\left(uV_X-\\frac{V_X^2}{2}\\right)\n\\]\n\nfrom \\(M_1\\), while\n\n\\[\nI_D=\\frac{\\beta}{2}(u-V_X)^2\n\\]\n\nfrom \\(M_2\\).\n\nEquating the two currents gives\n\n\\[\nV_X=\\left(1-\\frac1{\\sqrt 2}\\right)u\n\\]\n\nand\n\n\\[\n\\boxed{I_D=\\frac{\\beta}{4}u^2}.\n\\]\n\nHence,\n\n\\[\n\\boxed{V_{out}=V_{DD}-\\frac{\\beta R_D}{4}(V_{in}-V_T)^2}\n\\]\n\nprovided that\n\n\\[\nV_{out}\\geq V_{in}-V_T.\n\\]\n\nFor \\(V_{in}\\leq V_T\\), both devices are off and\n\n\\[\n\\boxed{V_{out}\\simeq V_{DD}}.\n\\]\n\nThe boundary between the high-output and low-output regions is obtained from \\(V_{out}=u\\):\n\n\\[\nV_{DD}-\\frac{\\beta R_D}{4}u^2=u.\n\\]\n\nThus\n\n\\[\nu_c=\\frac{2\\left(\\sqrt{1+\\beta R_DV_{DD}}-1\\right)}{\\beta R_D}.\n\\]\n\n---\n\n## 2. Low-output region: both devices in triode\n\nWhen \\(V_{out}<u\\), both devices are in triode. Eliminating \\(V_X\\) from their two triode equations gives\n\n\\[\n\\boxed{I_D=\\frac{\\beta}{4}\n\\left(2uV_{out}-V_{out}^2\\right)}.\n\\]\n\nCombining this with the resistor current,\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\n\\frac{\\beta}{4}\n\\left[2(V_{in}-V_T)V_{out}-V_{out}^2\\right].\n\\]\n\nIf \\(a=\\beta R_D/4\\), the physical solution is\n\n\\[\n\\boxed{\nV_{out}\n=\n\\frac{\n1+2au-\\sqrt{(1+2au)^2-4aV_{DD}}\n}{2a}\n}\n\\]\n\nwith \\(u=V_{in}-V_T\\). This branch applies for \\(u\\geq u_c\\).\n\nFor large input voltage, \\(V_{out}\\) approaches zero, but is not exactly zero because of the finite resistor and transistor on-resistance.\n\n---\n\n## Small-signal voltage gain\n\nFor a bias point in the high-output region,\n\n\\[\nI_D=\\frac{\\beta}{4}(V_{in}-V_T)^2,\n\\]\n\nso the effective transconductance of the two-transistor stack is\n\n\\[\ng_{m,\\mathrm{eq}}\n=\\frac{\\partial I_D}{\\partial V_{in}}\n=\\frac{\\beta}{2}(V_{in}-V_T).\n\\]\n\nNeglecting channel-length modulation,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=-\\frac{\\beta R_D}{2}(V_{IN}-V_T)\n}.\n\\]\n\nIn the low-output region,\n\n\\[\nA_v\n=\n-\\frac{R_D(\\beta V_{OUT}/2)}\n{1+R_D\\beta[(V_{IN}-V_T)-V_{OUT}]/2}.\n\\]\n\nThus the circuit behaves as an inverting, resistor-loaded NMOS amplifier/inverter. For matched devices and the ideal square-law model, its external \\(I\\)-\\(V\\) characteristic is equivalent to that of a single NMOS having approximately half the \\(\\beta\\) of either individual transistor.",
        "format": "markdown",
        "sha256": "053dcea4ed2f0f53a28c224c976fb8e331ca4c802d2289f6330dc9f88c05fb7a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS behavior, with the lower device in triode and the upper device saturated in the high-output region. Its matched-device result of half the individual β is equivalent to a single device with roughly twice the channel length, matching the essential conclusion.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 35696,
        "total_tokens": 37124,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34505,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 35696,
        "total_tokens": 37124,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34505,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are matched enhancement NMOS devices, with body effect and channel-length modulation neglected. Define\n\n\\[\n\\beta=\\mu_n C_{\\rm ox}\\frac WL,\\qquad\nu=V_{\\rm in}-V_{TN}\n\\]\n\nand let \\(V_X\\) be the node between \\(M_1\\) and \\(M_2\\).\n\nThe resistor current is\n\n\\[\nI_D=\\frac{V_{DD}-V_{\\rm out}}{R_D}.\n\\]\n\n## 1. Transistor voltages\n\nFor \\(M_1\\),\n\n\\[\nV_{GS1}=V_{\\rm in},\\qquad V_{DS1}=V_X.\n\\]\n\nFor \\(M_2\\),\n\n\\[\nV_{GS2}=V_{\\rm in}-V_X,\\qquad\nV_{DS2}=V_{\\rm out}-V_X.\n\\]\n\nIf \\(u>0\\), \\(M_2\\) can conduct only if\n\n\\[\nV_X<u.\n\\]\n\nTherefore \\(M_1\\) necessarily operates in the triode region, since\n\n\\[\nV_{DS1}=V_X<u=V_{GS1}-V_{TN}.\n\\]\n\nThe saturation condition for \\(M_2\\) is\n\n\\[\nV_{DS2}\\ge V_{GS2}-V_{TN}\n\\]\n\nor, after substitution,\n\n\\[\nV_{\\rm out}\\ge u.\n\\]\n\nThus, for normal high-output operation, \\(M_1\\) is in triode and \\(M_2\\) is in saturation.\n\n---\n\n## 2. High-output region: \\(M_1\\) triode, \\(M_2\\) saturation\n\nThe two device currents are\n\n\\[\nI_D=\\beta\\left(uV_X-\\frac{V_X^2}{2}\\right)\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nI_D=\\frac{\\beta}{2}(u-V_X)^2\n\\]\n\nfor \\(M_2\\). Equating them gives\n\n\\[\nV_X=\\left(1-\\frac{1}{\\sqrt 2}\\right)u\n\\]\n\nand\n\n\\[\n\\boxed{I_D=\\frac{\\beta}{4}u^2}.\n\\]\n\nConsequently,\n\n\\[\n\\boxed{\nV_{\\rm out}\n=\nV_{DD}\n-\\frac{\\beta R_D}{4}(V_{\\rm in}-V_{TN})^2\n}\n\\]\n\nprovided that\n\n\\[\nV_{\\rm out}\\ge V_{\\rm in}-V_{TN}.\n\\]\n\nFor \\(V_{\\rm in}\\le V_{TN}\\), both transistors are off and\n\n\\[\n\\boxed{V_{\\rm out}\\approx V_{DD}}.\n\\]\n\n---\n\n## 3. Low-output region: both transistors in triode\n\nWhen \\(V_{\\rm out}<u\\), \\(M_2\\) also enters triode. Solving the two triode equations gives\n\n\\[\nI_D=\\frac{\\beta}{4}\\left(2uV_{\\rm out}-V_{\\rm out}^2\\right).\n\\]\n\nThe output voltage is then found from\n\n\\[\n\\boxed{\n\\frac{V_{DD}-V_{\\rm out}}{R_D}\n=\n\\frac{\\beta}{4}\n\\left[2(V_{\\rm in}-V_{TN})V_{\\rm out}\n-V_{\\rm out}^2\\right]\n}.\n\\]\n\nThe transition between the two regions occurs when \\(V_{\\rm out}=u\\), giving\n\n\\[\nu_b=\n\\frac{2}{\\beta R_D}\n\\left(\\sqrt{1+\\beta R_DV_{DD}}-1\\right).\n\\]\n\n---\n\n## 4. Small-signal voltage gain\n\nIf the circuit is biased in the high-output region, its effective transconductance is\n\n\\[\ng_{m,\\text{eff}}\n=\n\\frac{dI_D}{dV_{\\rm in}}\n=\n\\frac{\\beta}{2}(V_{\\rm in}-V_{TN}).\n\\]\n\nTherefore, neglecting channel-length modulation,\n\n\\[\n\\boxed{\nA_v\n=\n\\frac{dV_{\\rm out}}{dV_{\\rm in}}\n=\n-\\frac{\\beta R_D}{2}(V_{\\rm in}-V_{TN})\n}.\n\\]\n\nThe circuit is thus an inverting amplifier. It is not a conventional cascode because the gate of \\(M_2\\) is driven by the same signal as the gate of \\(M_1\\). In the usual operating region, \\(M_1\\) is in triode and \\(M_2\\) is saturated.",
        "format": "markdown",
        "sha256": "322b297ceadcb66137c3c8057cce4280c41123730390773e936410150e5b5bdf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the common-gate stack, the triode/saturation operating regions, and derives the appropriate current and gain; its β/4 current law implicitly corresponds to an effective channel length of 2L. However, it never states that central longer-effective-channel equivalence or its output-resistance implication.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 23258,
        "total_tokens": 24686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 23258,
        "total_tokens": 24686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(V_X\\) be the node between \\(M_1\\) and \\(M_2\\). Assume identical enhancement-mode NMOS transistors, negligible body effect and channel-length modulation, and define\n\n\\[\n\\beta=\\mu_n C_{\\text{ox}}\\frac WL,\n\\qquad\nu=V_{in}-V_T .\n\\]\n\nThe drain current through both devices is the same:\n\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}.\n\\]\n\nThe device voltages are\n\n\\[\nV_{GS1}=V_{in},\\qquad V_{DS1}=V_X,\n\\]\n\n\\[\nV_{GS2}=V_{in}-V_X,\\qquad V_{DS2}=V_{out}-V_X.\n\\]\n\n## Operating regions\n\nFor \\(V_{in}\\le V_T\\), both transistors are off, so\n\n\\[\nI_D=0,\\qquad V_{out}=V_{DD}.\n\\]\n\nFor \\(V_{in}>V_T\\), \\(M_2\\) can conduct only if\n\n\\[\nV_{GS2}>V_T\n\\quad\\Rightarrow\\quad\nV_X<u.\n\\]\n\nThus,\n\n\\[\nV_{DS1}=V_X<u=V_{GS1}-V_T,\n\\]\n\nso \\(M_1\\) must be in the triode region whenever current flows. It is not possible for both transistors to be saturated at nonzero current.\n\nFor \\(M_2\\),\n\n\\[\nV_{DS2}\\ge V_{GS2}-V_T\n\\quad\\Rightarrow\\quad\nV_{out}\\ge u.\n\\]\n\nTherefore:\n\n- \\(M_1\\) is always in triode when on.\n- \\(M_2\\) is saturated if \\(V_{out}\\ge u\\).\n- Both devices are in triode if \\(V_{out}<u\\).\n\n---\n\n## Region 1: \\(M_1\\) triode and \\(M_2\\) saturation\n\nThe current equations are\n\n\\[\nI_D=\\beta\\left(uV_X-\\frac{V_X^2}{2}\\right)\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nI_D=\\frac{\\beta}{2}(u-V_X)^2\n\\]\n\nfor \\(M_2\\). Equating them gives\n\n\\[\nV_X=\\left(1-\\frac{1}{\\sqrt 2}\\right)u\n\\]\n\nand\n\n\\[\n\\boxed{I_D=\\frac{\\beta}{4}u^2}.\n\\]\n\nHence,\n\n\\[\n\\boxed{\nV_{out}=V_{DD}-\\frac{\\beta R_D}{4}(V_{in}-V_T)^2\n}\n\\]\n\nprovided that \\(V_{out}\\ge V_{in}-V_T\\).\n\nThus the two-transistor stack has an effective transconductance parameter of approximately \\(\\beta/2\\), compared with \\(\\beta\\) for one saturated NMOS.\n\nThe boundary between this region and the both-triode region is determined by\n\n\\[\nV_{out}=u,\n\\]\n\nor\n\n\\[\nV_{DD}-\\frac{\\beta R_D}{4}u^2=u.\n\\]\n\nTherefore,\n\n\\[\nu_{\\text{tr}}\n=\n\\frac{2\\left(\\sqrt{1+\\beta R_DV_{DD}}-1\\right)}\n{\\beta R_D}.\n\\]\n\n---\n\n## Region 2: both \\(M_1\\) and \\(M_2\\) in triode\n\nWhen \\(V_{out}<u\\), the current through the stack is\n\n\\[\nI_D\n=\n\\frac{\\beta}{4}\\left(2uV_{out}-V_{out}^2\\right).\n\\]\n\nCombining this with the resistor equation gives\n\n\\[\n\\boxed{\nV_{DD}-V_{out}\n=\n\\frac{\\beta R_D}{4}\n\\left[2(V_{in}-V_T)V_{out}-V_{out}^2\\right]\n}.\n\\]\n\nIf \\(K=\\beta R_D/4\\), the physical solution is\n\n\\[\n\\boxed{\nV_{out}\n=\n\\frac{1+2Ku-\n\\sqrt{(1+2Ku)^2-4KV_{DD}}}{2K}\n}.\n\\]\n\nAt large input voltage, \\(V_{out}\\) becomes small and the stack strongly pulls the output toward ground.\n\n---\n\n## Small-signal voltage gain\n\nIn the \\(M_1\\)-triode/\\(M_2\\)-saturation region,\n\n\\[\nI_D=\\frac{\\beta}{4}(V_{in}-V_T)^2,\n\\]\n\nso\n\n\\[\ng_{m,\\text{eff}}\n=\n\\frac{dI_D}{dV_{in}}\n=\n\\frac{\\beta}{2}(V_{in}-V_T).\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{dV_{out}}{dV_{in}}\n=\n-\\frac{\\beta R_D}{2}(V_{in}-V_T)\n}.\n\\]\n\nIn the both-triode region,\n\n\\[\n\\boxed{\nA_v=\n-\\frac{\\beta V_{out}/2}\n{1/R_D+\\beta\\left[(V_{in}-V_T)-V_{out}\\right]/2}\n}.\n\\]\n\nThus the circuit behaves as an inverting, resistively loaded NMOS amplifier/inverter:\n\n- low \\(V_{in}\\): \\(V_{out}\\approx V_{DD}\\);\n- increasing \\(V_{in}\\): the two-transistor stack conducts;\n- high \\(V_{in}\\): \\(V_{out}\\) is pulled low.",
        "format": "markdown",
        "sha256": "6e886ea29b45c9d74eef481ba44f6659b0d697872f2b627b6faf3a2654a98357"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series pair, with M1 in triode and M2 saturated in the main operating region. Its derived effective parameter β/2 for identical devices is equivalent to a single NMOS with approximately twice the channel length; the remaining analysis is consistent with the stated ideal-model assumptions.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 23981,
        "total_tokens": 25409,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22790,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 23981,
        "total_tokens": 25409,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22790,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source-coupled differential pair (current-steering pair) with an ideal tail current \\(I_1\\). \\(M_2\\) has a resistive load, and the single-ended output is taken at its drain.\n\nAssume matched MOSFETs, an ideal tail source, and initially neglect channel-length modulation and body effect. Define\n\n\\[\nI_T=I_1,\\qquad \\beta=\\mu_n C_{\\mathrm{ox}}\\frac WL,\n\\]\n\nand let \\(V_S\\) be the common-source voltage.\n\n## 1. DC operation\n\nThe tail-current constraint is\n\n\\[\nI_{D1}+I_{D2}=I_T.\n\\]\n\nThe transistor overdrives differ by the input difference:\n\n\\[\nV_{OV1}-V_{OV2}\n=(V_{in}-V_S-V_T)-(V_b-V_S-V_T)\n=V_{in}-V_b.\n\\]\n\nLet\n\n\\[\nv_d=V_{in}-V_b.\n\\]\n\nWhen both transistors are in saturation,\n\n\\[\nI_{D1}=\\frac{\\beta}{2}V_{OV1}^2,\n\\qquad\nI_{D2}=\\frac{\\beta}{2}V_{OV2}^2.\n\\]\n\nThe exact current-steering relation is\n\n\\[\nX=\\sqrt{\\frac{4I_T}{\\beta}-v_d^2},\n\\]\n\n\\[\nI_{D1}=\\frac{\\beta}{8}(X+v_d)^2,\n\\qquad\nI_{D2}=\\frac{\\beta}{8}(X-v_d)^2.\n\\]\n\nThe output voltage is therefore\n\n\\[\n\\boxed{V_{out}=V_{DD}-R_D I_{D2}}.\n\\]\n\n### Balanced condition\n\nFor \\(V_{in}=V_b\\),\n\n\\[\nI_{D1}=I_{D2}=\\frac{I_T}{2},\n\\]\n\nso the quiescent output voltage is\n\n\\[\n\\boxed{V_{out,Q}=V_{DD}-\\frac{I_T R_D}{2}}.\n\\]\n\nAt this point,\n\n\\[\nV_{OV}=\\sqrt{\\frac{I_T}{\\beta}},\n\\qquad\ng_m=\\beta V_{OV}=\\sqrt{\\beta I_T}.\n\\]\n\n## 2. Small-signal voltage gain\n\nFor a small differential input, the ideal tail source forces the incremental current changes to be equal and opposite:\n\n\\[\ni_{d1}+i_{d2}=0.\n\\]\n\nThe common-source node has the small-signal voltage\n\n\\[\nv_s=\\frac{v_{in}+v_b}{2}.\n\\]\n\nThus,\n\n\\[\ni_{d2}\n=g_m(v_b-v_s)\n=-\\frac{g_m}{2}(v_{in}-v_b).\n\\]\n\nSince\n\n\\[\nv_{out}=-R_D i_{d2},\n\\]\n\nthe output is\n\n\\[\n\\boxed{\nv_{out}=\\frac{g_mR_D}{2}(v_{in}-v_b)\n}.\n\\]\n\nIf \\(V_b\\) is an AC ground,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=+\\frac{g_mR_D}{2}\n= \\frac{R_D}{2}\\sqrt{\\beta I_T}\n}.\n\\]\n\nThe gain is positive: increasing \\(V_{in}\\) increases \\(M_1\\)'s current, decreases \\(M_2\\)'s current, reduces the voltage drop across \\(R_D\\), and hence raises \\(V_{out}\\).\n\nIncluding equal finite transistor output resistances \\(r_o\\), a useful approximation is\n\n\\[\nA_v\\simeq \\frac{g_m}{2}\\left(R_D\\parallel 2r_o\\right).\n\\]\n\n## 3. Current steering and limits\n\n- If \\(V_{in}>V_b\\), \\(M_1\\) takes more of the tail current and \\(M_2\\) takes less. Therefore \\(V_{out}\\) increases.\n- If \\(V_{in}<V_b\\), \\(M_2\\) takes more current and \\(V_{out}\\) decreases.\n- In the square-law model, complete current steering occurs approximately at\n\n\\[\n|V_{in}-V_b|\n=\\sqrt{\\frac{2I_T}{\\beta}}\n=\\sqrt{2}\\,V_{OV}.\n\\]\n\nFor a sufficiently positive input, \\(M_2\\) turns off and \\(V_{out}\\to V_{DD}\\). For a sufficiently negative input, \\(M_2\\) carries nearly all of \\(I_T\\), giving approximately\n\n\\[\nV_{out}\\simeq V_{DD}-I_T R_D,\n\\]\n\nprovided \\(M_2\\) remains in saturation.\n\nFor \\(M_2\\) to remain saturated,\n\n\\[\nV_{out}\\ge V_b-V_T.\n\\]\n\nThus, the quiescent bias should satisfy\n\n\\[\nV_{DD}-\\frac{I_T R_D}{2}\\ge V_b-V_T.\n\\]",
        "format": "markdown",
        "sha256": "adf057d9f4bdb40a5cc9e7edf87e6c3f2214cc71f0508fc14d41a0ea9cb6a834"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, with M2 loaded by RD and the output at its drain. The current-steering explanation and non-inverting gain +gmRD/2 match the essential signal path.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 13508,
        "total_tokens": 15803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 13508,
        "total_tokens": 15803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are matched NMOS devices, the tail source is ideal with current \\(I_T\\equiv I_1\\), and initially neglect channel-length modulation and body effect.\n\nThe circuit is an **NMOS differential pair used as a current-steering circuit**. The drain of \\(M_1\\) is tied directly to \\(V_{DD}\\), while the current in \\(M_2\\) flows through \\(R_D\\) and produces the output.\n\n## 1. Basic dc relations\n\nLet \\(V_S\\) be the common-source voltage and \\(i_{D1},i_{D2}\\) the drain currents. Since the tail current is fixed,\n\n\\[\ni_{D1}+i_{D2}=I_T .\n\\]\n\nThe output voltage is determined only by the current in \\(M_2\\):\n\n\\[\nV_{\\text{out}}=V_{DD}-R_D i_{D2}.\n\\]\n\nThus, when \\(V_{\\text{in}}\\) increases, \\(M_1\\) takes more of the tail current, \\(M_2\\) takes less, and \\(V_{\\text{out}}\\) rises.\n\n---\n\n## 2. Large-signal transfer characteristic\n\nUsing the square-law model,\n\n\\[\ni_{Dk}=\\frac{1}{2}\\beta V_{\\text{OV}k}^{\\,2},\n\\qquad\n\\beta=\\mu_n C_{\\text{ox}}\\frac WL ,\n\\]\n\nwhere\n\n\\[\nV_{\\text{OV}1}=V_{\\text{in}}-V_S-V_T,\n\\qquad\nV_{\\text{OV}2}=V_b-V_S-V_T.\n\\]\n\nDefine\n\n\\[\n\\Delta V=V_{\\text{in}}-V_b.\n\\]\n\nBecause both sources are connected together,\n\n\\[\nV_{\\text{OV}1}-V_{\\text{OV}2}=\\Delta V.\n\\]\n\nIf both devices are on and in saturation, let\n\n\\[\nS=\\sqrt{\\frac{4I_T}{\\beta}-(\\Delta V)^2}.\n\\]\n\nThen\n\n\\[\nV_{\\text{OV}1}=\\frac{S+\\Delta V}{2},\n\\qquad\nV_{\\text{OV}2}=\\frac{S-\\Delta V}{2},\n\\]\n\nand therefore\n\n\\[\ni_{D1}=\\frac{\\beta}{8}(S+\\Delta V)^2,\n\\]\n\n\\[\ni_{D2}=\\frac{\\beta}{8}(S-\\Delta V)^2.\n\\]\n\nThe output voltage is consequently\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}\n-\\frac{\\beta R_D}{8}\n\\left[\n\\sqrt{\\frac{4I_T}{\\beta}-(V_{\\text{in}}-V_b)^2}\n-(V_{\\text{in}}-V_b)\n\\right]^2\n}\n\\]\n\nfor\n\n\\[\n|V_{\\text{in}}-V_b|\n\\leq \\sqrt{\\frac{2I_T}{\\beta}}.\n\\]\n\nFor sufficiently large input differences, the pair steers essentially all the tail current into one transistor:\n\n\\[\n\\begin{array}{c|c|c}\nV_{\\text{in}}-V_b & i_{D1} & i_{D2} \\\\ \\hline\n\\text{large positive} & I_T & 0\\\\\n\\text{large negative} & 0 & I_T\n\\end{array}\n\\]\n\nThus,\n\n\\[\nV_{\\text{out}}\\approx V_{DD}\n\\quad\\text{for large positive }V_{\\text{in}}-V_b,\n\\]\n\nand\n\n\\[\nV_{\\text{out}}\\approx V_{DD}-I_T R_D\n\\quad\\text{for large negative }V_{\\text{in}}-V_b,\n\\]\n\nprovided \\(M_2\\) remains in saturation.\n\n---\n\n## 3. Balanced operating point\n\nFor matched devices with\n\n\\[\nV_{\\text{in}}=V_b,\n\\]\n\nthe tail current divides equally:\n\n\\[\ni_{D1Q}=i_{D2Q}=\\frac{I_T}{2}.\n\\]\n\nThe quiescent output voltage is\n\n\\[\n\\boxed{\nV_{\\text{out},Q}=V_{DD}-\\frac{I_T R_D}{2}\n}\n\\]\n\nand the common-source voltage is\n\n\\[\nV_{SQ}=V_b-V_T-\\sqrt{\\frac{I_T}{\\beta}}.\n\\]\n\nAt this point, the overdrive voltage of either MOSFET is\n\n\\[\nV_{\\text{OV}}=\\sqrt{\\frac{I_T}{\\beta}}.\n\\]\n\n---\n\n## 4. Small-signal voltage gain\n\nAt the balanced point,\n\n\\[\ng_m=\\beta V_{\\text{OV}}\n=\\sqrt{\\beta I_T}.\n\\]\n\nFor an ideal tail current source, the small-signal source voltage is approximately\n\n\\[\n\\tilde v_S=\\frac{\\tilde v_{\\text{in}}+\\tilde v_b}{2}.\n\\]\n\nTherefore, for \\(V_b\\) fixed in the ac sense \\((\\tilde v_b=0)\\),\n\n\\[\n\\tilde v_{gs2}=-\\frac{\\tilde v_{\\text{in}}}{2}.\n\\]\n\nThe change in \\(M_2\\)'s current is\n\n\\[\n\\tilde i_{D2}=-\\frac{g_m}{2}\\tilde v_{\\text{in}},\n\\]\n\nso\n\n\\[\n\\tilde v_{\\text{out}}\n=-R_D\\tilde i_{D2}\n=\\frac{g_mR_D}{2}\\tilde v_{\\text{in}}.\n\\]\n\nHence the voltage gain is\n\n\\[\n\\boxed{\nA_v=\\frac{\\tilde v_{\\text{out}}}{\\tilde v_{\\text{in}}}\n\\approx +\\frac{g_mR_D}{2}\n}\n\\]\n\nor, more generally,\n\n\\[\n\\boxed{\n\\tilde v_{\\text{out}}\n\\approx\n\\frac{g_mR_D}{2}\n(\\tilde v_{\\text{in}}-\\tilde v_b)\n}.\n\\]\n\nThe gain is positive because increasing \\(V_{\\text{in}}\\) reduces the current through \\(M_2\\), thereby reducing the voltage drop across \\(R_D\\) and increasing \\(V_{\\text{out}}\\).\n\nFor finite and equal transistor output resistances \\(r_o\\), the gain becomes approximately\n\n\\[\nA_v\\approx\n\\frac{g_mR_D}{2+R_D/r_o}.\n\\]\n\nThe MOSFET saturation conditions are\n\n\\[\nV_{DD}\\geq V_{\\text{in}}-V_T\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nV_{\\text{out}}\\geq V_b-V_T\n\\]\n\nfor \\(M_2\\). If the latter condition fails, \\(M_2\\) enters triode and the square-law differential-pair expressions no longer apply.",
        "format": "markdown",
        "sha256": "3ed3b9f127e1ed1f1a06c9749bfb3761a4ef41444be0ace5b042b48beb0a6767"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a source-coupled differential pair with M2 biased at Vb and output at its drain. It also gives the correct non-inverting gain and explains the signal path.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 19107,
        "total_tokens": 21402,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 19107,
        "total_tokens": 21402,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source-coupled differential pair with a resistive load on the \\(M_2\\) side. The tail current source \\(I_1\\) fixes the total current through \\(M_1\\) and \\(M_2\\).\n\nAssume matched MOSFETs, an ideal tail current source, both devices in saturation, and negligible channel-length modulation.\n\n## 1. DC operation\n\nLet the tail current be \\(I_T=I_1\\). The source node is common to both transistors, so\n\n\\[\nI_{D1}+I_{D2}=I_T .\n\\]\n\nThe output voltage is determined only by the current in \\(M_2\\):\n\n\\[\nV_{\\text{out}}=V_{DD}-I_{D2}R_D.\n\\]\n\nFor a balanced bias point,\n\n\\[\nV_{\\text{in},Q}=V_b,\n\\]\n\nthe two transistors carry equal current:\n\n\\[\nI_{D1,Q}=I_{D2,Q}=\\frac{I_T}{2}.\n\\]\n\nTherefore,\n\n\\[\nV_{\\text{out},Q}\n=\nV_{DD}-\\frac{I_T R_D}{2}.\n\\]\n\nUsing\n\n\\[\nI_D=\\frac{1}{2}\\beta_n V_{OV}^2,\n\\]\n\nthe quiescent overdrive and transconductance are\n\n\\[\nV_{OV,Q}=\\sqrt{\\frac{I_T}{\\beta_n}},\n\\]\n\n\\[\ng_m=\\beta_n V_{OV,Q}\n=\\sqrt{\\beta_n I_T}.\n\\]\n\nThe source voltage at the balanced operating point is\n\n\\[\nV_{S,Q}=V_b-V_{TN}-V_{OV,Q}.\n\\]\n\n## 2. Small-signal voltage gain\n\nLet \\(v_i\\) and \\(v_b\\) denote small-signal variations at the two gates, and let \\(v_s\\) be the small-signal voltage at the common-source node.\n\nFor an ideal tail current source, the incremental tail current is zero:\n\n\\[\ng_m(v_i-v_s)+g_m(v_b-v_s)=0.\n\\]\n\nThus,\n\n\\[\nv_s=\\frac{v_i+v_b}{2}.\n\\]\n\nThe incremental current in \\(M_2\\) is\n\n\\[\ni_{d2}=g_m(v_b-v_s)\n=\n\\frac{g_m}{2}(v_b-v_i).\n\\]\n\nSince the output voltage is generated by the resistor \\(R_D\\),\n\n\\[\nv_o=-R_D i_{d2}.\n\\]\n\nHence,\n\n\\[\n\\boxed{\nv_o=\\frac{g_mR_D}{2}(v_i-v_b)\n}\n\\]\n\nand the differential voltage gain is\n\n\\[\n\\boxed{\nA_{vd}=\\frac{v_o}{v_i-v_b}\n\\simeq \\frac{g_mR_D}{2}\n}.\n\\]\n\nIf \\(V_b\\) is AC-grounded,\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\\simeq +\\frac{g_mR_D}{2}\n}.\n\\]\n\nThe gain is positive: increasing \\(V_{\\text{in}}\\) increases \\(M_1\\)'s current, reduces \\(M_2\\)'s current, decreases the drop across \\(R_D\\), and therefore raises \\(V_{\\text{out}}\\).\n\nWith channel-length modulation or an external load,\n\n\\[\nR_D\n\\]\n\nis approximately replaced by\n\n\\[\nR_D\\parallel r_{o2}\\parallel R_L.\n\\]\n\n## 3. Large-signal current steering\n\nDefine\n\n\\[\n\\Delta=V_{\\text{in}}-V_b.\n\\]\n\nFor matched devices in saturation,\n\n\\[\nI_{D1}=\\frac{\\beta_n}{2}(V_{\\text{in}}-V_S-V_{TN})^2,\n\\]\n\n\\[\nI_{D2}=\\frac{\\beta_n}{2}(V_b-V_S-V_{TN})^2.\n\\]\n\nSolving with \\(I_{D1}+I_{D2}=I_T\\), let\n\n\\[\nm=\\sqrt{\\frac{I_T}{\\beta_n}-\\frac{\\Delta^2}{4}}.\n\\]\n\nThen\n\n\\[\nI_{D2}\n=\n\\frac{\\beta_n}{2}\n\\left(m-\\frac{\\Delta}{2}\\right)^2,\n\\]\n\nand\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}\n-\nR_D\\frac{\\beta_n}{2}\n\\left(m-\\frac{\\Delta}{2}\\right)^2\n}.\n\\]\n\nThus:\n\n- If \\(V_{\\text{in}}\\) increases above \\(V_b\\), current is steered from \\(M_2\\) to \\(M_1\\), and \\(V_{\\text{out}}\\) rises.\n- If \\(V_{\\text{in}}\\) decreases below \\(V_b\\), \\(M_2\\) carries more of the tail current, and \\(V_{\\text{out}}\\) falls.\n- For sufficiently large positive \\(\\Delta\\), \\(M_2\\) turns off and \\(V_{\\text{out}}\\to V_{DD}\\).\n- For sufficiently large negative \\(\\Delta\\), \\(M_1\\) turns off and \\(M_2\\) carries nearly all of \\(I_T\\), giving \\(V_{\\text{out}}\\approx V_{DD}-I_TR_D\\).\n\n## 4. Required voltage headroom\n\nFor \\(M_2\\) to remain in saturation,\n\n\\[\nV_{\\text{out}}\\ge V_b-V_{TN}.\n\\]\n\nAt the balanced bias point, this requires\n\n\\[\nV_{DD}-\\frac{I_TR_D}{2}\\ge V_b-V_{TN}.\n\\]\n\nAlso, \\(M_1\\) requires adequate drain voltage:\n\n\\[\nV_{DD}\\ge V_{\\text{in}}-V_{TN}.\n\\]\n\nThus, the circuit behaves as a differential amplifier with \\(V_b\\) as the reference input and a nominal gain of \\(g_mR_D/2\\).",
        "format": "markdown",
        "sha256": "2f17fe16d5d6a70730ff8b80b9790d4b41383a3c7a45b7f53b46b67adcefa056"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a source-coupled differential pair with M2 biased at Vb and output at its drain. The positive gain and current-steering explanation are also consistent with the signal path.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 12155,
        "total_tokens": 14450,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 12155,
        "total_tokens": 14450,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output can look inductive because the gate of \\(M_1\\) is not an ideal ac ground. When finding \\(Z_{\\text{out}}\\), set \\(V_{\\text{in}}=0\\); the gate is then connected to ground through \\(R_S\\).\n\nLet \\(C=C_{gs1}\\), and apply a test voltage \\(v_o\\) at the output. The gate voltage is determined by \\(R_S\\) and \\(C_{gs}\\):\n\n\\[\n\\frac{v_g}{R_S}+sC(v_g-v_o)=0\n\\]\n\nso that\n\n\\[\nv_g=\\frac{sR_SC}{1+sR_SC}v_o,\n\\qquad\nv_o-v_g=\\frac{v_o}{1+sR_SC}.\n\\]\n\nThus, neglecting other capacitances, the admittance looking into the output is approximately\n\n\\[\nY_{\\text{out}}\n=G_o+\\frac{g_m+sC}{1+sR_SC},\n\\]\n\nwhere \\(G_o\\) includes the output conductances of \\(M_1\\) and \\(M_2\\). Hence\n\n\\[\nZ_{\\text{out}}\n=\\frac{1+sR_SC}\n{(G_o+g_m)+sC(1+G_oR_S)}.\n\\]\n\nIts imaginary part is\n\n\\[\n\\operatorname{Im}\\{Z_{\\text{out}}\\}\n=\n\\frac{\\omega C(g_mR_S-1)}\n{(G_o+g_m)^2+\n\\omega^2 C^2(1+G_oR_S)^2}.\n\\]\n\nTherefore, in this simplified model,\n\n\\[\ng_mR_S>1\n\\]\n\nmakes the imaginary part of \\(Z_{\\text{out}}\\) positive, which is the behavior of an inductor.\n\nPhysically, a change in \\(v_o\\) drives a current through \\(C_{gs}\\), producing a quadrature-phase voltage across \\(R_S\\). This gate-voltage feedback causes the \\(g_m\\) current of \\(M_1\\) to partially cancel, or even exceed, the direct capacitive current of \\(C_{gs}\\). The net output admittance can consequently have negative susceptance—equivalent to a positive inductive reactance. It is an active, synthesized inductance; no physical inductor is present. Additional output capacitances can reduce or eliminate this inductive frequency range.",
        "format": "markdown",
        "sha256": "0fa74e78292dbc9da91516de9a0e833b80ddc790f992785e26ab4a95716cd676"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the gate–Cgs feedback in the source follower and finds the inductive condition gm1·RS > 1, consistent with the required mechanism. The added output-conductance refinement does not change the conclusion.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 17599,
        "total_tokens": 19189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 17599,
        "total_tokens": 19189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) is a source follower, but its gate is not an ideal ac ground because of \\(R_S\\). This allows a feedback path through the gate-source capacitance \\(C_{gs1}\\).\n\nSet \\(V_{in}\\), \\(V_b\\), and \\(V_{DD}\\) to ac ground and apply a test voltage \\(v_o\\) at the output. Neglecting other parasitic capacitances,\n\n\\[\n\\frac{v_g}{v_o}\n =\\frac{sR_SC_{gs1}}{1+sR_SC_{gs1}} .\n\\]\n\nThus, at frequencies below the gate pole,\n\n\\[\nv_g \\approx sR_SC_{gs1}v_o.\n\\]\n\nThe output current contains the ordinary capacitive current through \\(C_{gs1}\\), but also the transconductance current of \\(M_1\\). From the output-port viewpoint these currents have opposite signs:\n\n\\[\ni_o \\approx (g_m+g_o)v_o\n+sC_{gs1}v_o-g_mv_g .\n\\]\n\nTherefore,\n\n\\[\nY_o=\\frac{i_o}{v_o}\n\\approx (g_m+g_o)\n+sC_{gs1}(1-g_mR_S).\n\\]\n\nThe transistor has effectively generated a **negative capacitance** of magnitude \\(g_mR_SC_{gs1}\\). If\n\n\\[\ng_mR_S>1\n\\]\n\n(and the active term is large enough to overcome other output capacitances), the imaginary part of \\(Y_o\\) is negative. Consequently,\n\n\\[\n\\operatorname{Im}\\{Z_o\\}>0,\n\\]\n\nso the output impedance has an inductive reactance.\n\nFor example, with only \\(C_{gs1}\\) included,\n\n\\[\nZ_o(s)\\approx\n\\frac{1+sR_SC_{gs1}}\n{g_m+g_o+sC_{gs1}(1+R_Sg_o)}.\n\\]\n\nThe inductive behavior is not due to a physical inductor; it is an active-feedback effect produced by \\(R_S\\), \\(C_{gs1}\\), and the transconductance of \\(M_1\\). Additional parasitic or load capacitances reduce the frequency range over which it occurs.",
        "format": "markdown",
        "sha256": "82c3e1012873b24f149466c36efe205ec2169dfeb1413600c69784ed6dea1380"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower and the RS–Cgs feedback mechanism, derives the right condition RS > 1/gm for negative output susceptance and inductive impedance, and gives a consistent impedance expression. The frequency-endpoint transition is implicit in the equations.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 24298,
        "total_tokens": 25888,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 24298,
        "total_tokens": 25888,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For \\(Z_{\\text{out}}\\), set \\(V_{\\text{in}}=0\\). Thus \\(R_S\\) connects the gate of \\(M_1\\) to ac ground, while \\(V_{DD}\\) and \\(V_b\\) are also ac grounds. \\(M_1\\) is a source follower, and its parasitic \\(C_{gs}\\) provides feedback from the output to its gate.\n\nLet \\(v_o\\) be a test voltage at the output and \\(v_g\\) the gate voltage. Ignoring other capacitances for the moment,\n\n\\[\n\\frac{v_g}{R_S}+sC_{gs}(v_g-v_o)=0\n\\]\n\nso that\n\n\\[\nv_o-v_g=\\frac{v_o}{1+sR_SC_{gs}}.\n\\]\n\nThe current drawn by \\(M_1\\) is approximately\n\n\\[\ni_o=(g_m+sC_{gs})(v_o-v_g),\n\\]\n\nand therefore\n\n\\[\nZ_o(s)=\\frac{v_o}{i_o}\n      =\\frac{1+sR_SC_{gs}}{g_m+sC_{gs}}.\n\\]\n\nFor \\(s=j\\omega\\),\n\n\\[\n\\operatorname{Im}\\{Z_o\\}\n=\n\\frac{\\omega C_{gs}(R_Sg_m-1)}\n     {g_m^2+\\omega^2C_{gs}^2}.\n\\]\n\nHence, in this simplified model,\n\n\\[\nR_Sg_m>1\n\\]\n\nmakes the output impedance have a positive imaginary part, i.e. it is inductive. At low frequency,\n\n\\[\nZ_o \\approx \\frac{1}{g_m}\n+j\\omega\\frac{C_{gs}(R_Sg_m-1)}{g_m^2}.\n\\]\n\nThus it behaves like a resistance in series with an effective inductance. If \\(R_Sg_m\\gg1\\),\n\n\\[\nL_{\\text{eq}}\\approx \\frac{R_SC_{gs}}{g_m}.\n\\]\n\nPhysically, a change in \\(v_o\\) drives the gate through \\(C_{gs}\\). The finite \\(R_S\\) causes the gate voltage to change with a phase shift, reducing and delaying the source-follower current. Consequently, the output current can lag the output voltage, which is the signature of inductive impedance. The effect is an active or “synthetic” inductance; other parasitic and load capacitances can eventually make the impedance capacitive again at higher frequencies.",
        "format": "markdown",
        "sha256": "57ae972ec2f51e813241681e767677b5e3c1bf061c2f8e279f378e930cd9afb4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the source-follower output impedance and explains that it rises from about 1/gm to RS as Cgs couples the gate to the source, producing inductive behavior when RS > 1/gm.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 31611,
        "total_tokens": 33201,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 31611,
        "total_tokens": 33201,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are enhancement-mode NMOS devices with their sources grounded. The important connection is\n\n\\[\n\\begin{array}{c|ccc}\n & G & D & S\\\\ \\hline\nM_1 & V_X & V_{\\text{out}} & 0\\\\\nM_2 & V_{\\text{out}} & V_X & 0\n\\end{array}\n\\]\n\nThus, \\(M_1\\) is a common-source stage and \\(M_2\\) provides feedback from \\(V_{\\text{out}}\\) to node \\(X\\).\n\n## DC analysis\n\nSince MOS gate currents are approximately zero, KCL gives\n\n\\[\nI_{\\text{in}}=I_{D2}\n\\]\n\nat node \\(X\\), and\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}=I_{D1}\n\\]\n\nat the output node.\n\nIf both transistors operate in saturation, using\n\n\\[\nI_D=\\frac{1}{2}\\beta (V_{GS}-V_T)^2,\n\\]\n\nwe obtain\n\n\\[\nI_{\\text{in}}\n=\\frac{1}{2}\\beta_2(V_{\\text{out}}-V_{T2})^2\n\\]\n\nand\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}\n=\\frac{1}{2}\\beta_1(V_X-V_{T1})^2.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{V_{\\text{out}}\n=V_{T2}+\\sqrt{\\frac{2I_{\\text{in}}}{\\beta_2}}}\n\\]\n\nand\n\n\\[\n\\boxed{V_X\n=V_{T1}\n+\\sqrt{\\frac{2(V_{DD}-V_{\\text{out}})}\n{\\beta_1R_{D1}}}}.\n\\]\n\nThese equations are valid only if\n\n\\[\nV_{\\text{out}}\\ge V_X-V_{T1}\n\\]\n\nfor \\(M_1\\) saturation, and\n\n\\[\nV_X\\ge V_{\\text{out}}-V_{T2}\n\\]\n\nfor \\(M_2\\) saturation. Otherwise, the corresponding transistor must be analyzed in triode or cutoff. For example, in triode,\n\n\\[\nI_D=\\beta\\left[(V_{GS}-V_T)V_{DS}\n-\\frac{V_{DS}^2}{2}\\right].\n\\]\n\n## Small-signal analysis\n\nLet \\(g_{m1},g_{m2}\\) be the transconductances and \\(g_{ds1},g_{ds2}\\) the output conductances. Since \\(V_{DD}\\) is ac ground, define\n\n\\[\nG_o=\\frac{1}{R_{D1}}+g_{ds1}.\n\\]\n\nThe small-signal node equations are\n\n\\[\ni_{\\text{in}}=g_{ds2}v_X+g_{m2}v_{\\text{out}}\n\\]\n\nand\n\n\\[\n0=g_{m1}v_X+G_ov_{\\text{out}}.\n\\]\n\nHence,\n\n\\[\nD=G_og_{ds2}-g_{m1}g_{m2},\n\\]\n\n\\[\n\\boxed{\\frac{v_X}{i_{\\text{in}}}\n=\\frac{G_o}{D}}\n\\]\n\nand\n\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n=-\\frac{g_{m1}}{D}}.\n\\]\n\nNeglecting channel-length modulation,\n\n\\[\ng_{ds1}\\approx g_{ds2}\\approx 0,\n\\]\n\nso\n\n\\[\nv_{\\text{out}}=-g_{m1}R_{D1}v_X\n\\]\n\nand\n\n\\[\ni_{\\text{in}}=g_{m2}v_{\\text{out}}.\n\\]\n\nThus,\n\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n\\approx \\frac{1}{g_{m2}}}\n\\]\n\nand\n\n\\[\n\\boxed{\\frac{v_X}{i_{\\text{in}}}\n\\approx-\\frac{1}{g_{m1}g_{m2}R_{D1}}}.\n\\]\n\nThe positive transimpedance \\(v_{\\text{out}}/i_{\\text{in}}\\) results because a positive input current requires \\(M_2\\) to conduct more current, which requires a higher \\(V_{\\text{out}}\\).\n\nHowever, the circuit contains positive feedback:\n\n\\[\nv_X\\uparrow \\Rightarrow M_1\\text{ pulls }V_{\\text{out}}\\downarrow\n\\Rightarrow M_2\\text{ pulls node }X\\text{ less strongly}\n\\Rightarrow v_X\\uparrow.\n\\]\n\nConsequently, the circuit can exhibit a negative input resistance,\n\n\\[\nR_{\\text{in},X}\\approx\n-\\frac{1}{g_{m1}g_{m2}R_{D1}},\n\\]\n\nand may be regenerative or unstable unless sufficient damping or loading is present. Numerical values require \\(V_{DD}\\), \\(R_{D1}\\), transistor parameters, and the dc value of \\(I_{\\text{in}}\\).",
        "format": "markdown",
        "sha256": "12dd36cc5b30f8cc22638dadb27c6cbe6d95276738002ecbb563b46d80ae6670"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2 is driven by Vout, traces the positive-feedback loop, and gives the negative input resistance and possible instability, satisfying the full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 40497,
        "total_tokens": 42554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39366,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 40497,
        "total_tokens": 42554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39366,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are NMOS transistors, with\n\n- \\(M_1\\): gate at \\(X\\), drain at \\(V_{\\text{out}}\\), source at ground.\n- \\(M_2\\): drain at \\(X\\), gate at \\(V_{\\text{out}}\\), source at ground.\n\nThus, \\(M_2\\) provides the low-frequency path for the input current, since the gate of \\(M_1\\) draws no current.\n\n## DC operation\n\nThe two node equations are\n\n\\[\nI_{\\text{in}}=I_{D2}\n\\]\n\nand\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}=I_{D1}.\n\\]\n\nThe transistor voltages are\n\n\\[\nV_{GS1}=V_X,\\qquad V_{DS1}=V_{\\text{out}},\n\\]\n\n\\[\nV_{GS2}=V_{\\text{out}},\\qquad V_{DS2}=V_X.\n\\]\n\nFor example, if both transistors are in saturation and channel-length modulation is neglected,\n\n\\[\nI_{D1}=\\frac{\\beta_1}{2}(V_X-V_{T1})^2\n\\]\n\nand\n\n\\[\nI_{D2}=\\frac{\\beta_2}{2}(V_{\\text{out}}-V_{T2})^2.\n\\]\n\nTherefore,\n\n\\[\nV_{\\text{out}}\n=V_{T2}+\\sqrt{\\frac{2I_{\\text{in}}}{\\beta_2}},\n\\]\n\nand\n\n\\[\nV_X\n=V_{T1}+\n\\sqrt{\\frac{2(V_{DD}-V_{\\text{out}})}\n{\\beta_1R_{D1}}}.\n\\]\n\nThese expressions are valid only if the saturation conditions hold:\n\n\\[\nV_{\\text{out}}\\ge V_X-V_{T1}\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nV_X\\ge V_{\\text{out}}-V_{T2}\n\\]\n\nfor \\(M_2\\). Otherwise, the appropriate triode-region equations must be used.\n\n## Small-signal analysis\n\nLet\n\n\\[\nR_o=R_{D1}\\parallel r_{o1}.\n\\]\n\nSince \\(V_{DD}\\) is an AC ground, the output-node equation is\n\n\\[\n\\frac{v_o}{R_o}+g_{m1}v_x=0,\n\\]\n\nso\n\n\\[\nv_o=-g_{m1}R_o v_x.\n\\]\n\nAt node \\(X\\), the current through \\(M_2\\) is\n\n\\[\ni_{d2}=g_{m2}v_o+g_{o2}v_x,\n\\]\n\nwhere \\(g_{o2}=1/r_{o2}\\). Hence,\n\n\\[\ni_{\\text{in}}=g_{m2}v_o+g_{o2}v_x.\n\\]\n\nSolving,\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{\\text{in}}}\n=\n\\frac{g_{m1}R_o}\n{g_{m1}g_{m2}R_o-g_{o2}}\n}\n\\]\n\nand\n\n\\[\n\\boxed{\n\\frac{v_x}{i_{\\text{in}}}\n=\n\\frac{1}\n{g_{o2}-g_{m1}g_{m2}R_o}\n}.\n\\]\n\nIf channel-length modulation is neglected, \\(r_{o1},r_{o2}\\to\\infty\\), and therefore\n\n\\[\n\\boxed{\\frac{v_o}{i_{\\text{in}}}\\approx \\frac{1}{g_{m2}}}\n\\]\n\nand\n\n\\[\n\\boxed{\n\\frac{v_x}{i_{\\text{in}}}\n\\approx\n-\\frac{1}{g_{m1}g_{m2}R_{D1}}\n}.\n\\]\n\nThus, the circuit behaves as a current-to-voltage converter with transimpedance approximately \\(1/g_{m2}\\). The input node can exhibit a negative small-signal resistance,\n\n\\[\nR_{\\text{in}}\\approx\n-\\frac{1}{g_{m1}g_{m2}R_o},\n\\]\n\nbecause the two transistor stages are cross-coupled. This may lead to regenerative behavior or instability if the circuit is not properly biased or compensated.",
        "format": "markdown",
        "sha256": "f827bb0dc5a246c91908ed28bb9d90a9792d92685b6381b2522e6f6f98e4d826"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection to Vout and the cross-coupled positive-feedback path, and derives the resulting negative input resistance and regenerative/instability consequence. These meet the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 25282,
        "total_tokens": 27339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 25282,
        "total_tokens": 27339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(V_X\\) be the voltage at node \\(X\\), and let \\(V_O=V_{\\text{out}}\\). The lower transistor is cross-coupled:\n\n\\[\n\\begin{array}{c|ccc}\n & G & D & S\\\\ \\hline\nM_1 & X & V_O & 0\\\\\nM_2 & V_O & X & 0\n\\end{array}\n\\]\n\nThus, \\(M_1\\) is a common-source transistor, while \\(M_2\\) senses \\(V_O\\) and draws current from node \\(X\\).\n\n## DC analysis\n\nSince MOS gate currents are zero, the dc node equations are\n\n\\[\nI_{\\text{in}}=I_{D2}\n\\]\n\nand\n\n\\[\n\\frac{V_{DD}-V_O}{R_{D1}}=I_{D1}.\n\\]\n\nAssuming both devices are in saturation and neglecting channel-length modulation,\n\n\\[\nI_{D1}=\\frac{\\beta_1}{2}(V_X-V_{T1})^2,\n\\qquad\nI_{D2}=\\frac{\\beta_2}{2}(V_O-V_{T2})^2.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{V_O=V_{T2}+\\sqrt{\\frac{2I_{\\text{in}}}{\\beta_2}}}\n\\]\n\nand\n\n\\[\n\\boxed{V_X=V_{T1}\n+\\sqrt{\\frac{2(V_{DD}-V_O)}{\\beta_1R_{D1}}}}.\n\\]\n\nThese expressions are valid only if\n\n\\[\nV_O\\ge V_X-V_{T1}\n\\]\n\nfor \\(M_1\\) saturation and\n\n\\[\nV_X\\ge V_O-V_{T2}\n\\]\n\nfor \\(M_2\\) saturation.\n\n## Small-signal analysis\n\nLet\n\n\\[\ng_{mi}=\\frac{\\partial I_{Di}}{\\partial V_{GSi}},\n\\qquad\ng_{oi}=\\frac{1}{r_{oi}}.\n\\]\n\nAt midband, \\(V_{DD}\\) is ac ground. The small-signal equations are\n\n\\[\ni_{\\text{in}}=g_{o2}v_x+g_{m2}v_o\n\\]\n\nand\n\n\\[\n0=g_{m1}v_x+\n\\left(\\frac{1}{R_{D1}}+g_{o1}\\right)v_o.\n\\]\n\nDefine\n\n\\[\nG_O=\\frac{1}{R_{D1}}+g_{o1}.\n\\]\n\nSolving,\n\n\\[\n\\boxed{\\frac{v_o}{i_{\\text{in}}}\n=\n\\frac{g_{m1}}\n{g_{m1}g_{m2}-g_{o2}G_O}}\n\\]\n\nand\n\n\\[\n\\boxed{\\frac{v_x}{i_{\\text{in}}}\n=\n-\\frac{G_O}\n{g_{m1}g_{m2}-g_{o2}G_O}}.\n\\]\n\nIf transistor output resistances are neglected, \\(g_{o1},g_{o2}\\approx 0\\), then\n\n\\[\nv_o=-g_{m1}R_{D1}v_x\n\\]\n\nand\n\n\\[\ni_{\\text{in}}=g_{m2}v_o.\n\\]\n\nHence the transimpedance gain is\n\n\\[\n\\boxed{\\frac{v_o}{i_{\\text{in}}}\\approx \\frac{1}{g_{m2}}}\n\\]\n\nand the input resistance looking into node \\(X\\) is\n\n\\[\n\\boxed{R_{\\text{in}}\n=\\frac{v_x}{i_{\\text{in}}}\n\\approx\n-\\frac{1}{g_{m1}g_{m2}R_{D1}}}.\n\\]\n\nThe negative sign is important. The cross-coupling creates regenerative positive feedback:\n\n\\[\nv_x\\uparrow \\;\\Rightarrow\\; v_o\\downarrow\n\\;\\Rightarrow\\; I_{D2}\\downarrow\n\\;\\Rightarrow\\; v_x\\uparrow.\n\\]\n\nThus, the circuit behaves as a transimpedance stage with a **negative small-signal input resistance**. In practice, stability depends on the source resistance, transistor output resistances, and parasitic capacitances.",
        "format": "markdown",
        "sha256": "516d1c50b892e039f3b5e7175b6a848399ffc5874d9fb68d55d82ab787ec2d3d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2 as controlled by Vout rather than diode-connected, describes the positive-feedback loop, and derives a negative small-signal input resistance. These satisfy the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 37185,
        "total_tokens": 39242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36258,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 37185,
        "total_tokens": 39242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36258,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are nMOS transistors operating in saturation, \\(V_b\\) is an ideal ac ground, and \\(r_o\\), body effect, and capacitances are neglected. Let \\(v_s\\) be the small-signal voltage at the source of \\(M_1\\), \\(v_x\\) the voltage at node \\(X\\), and \\(v_o=v_{\\text{out}}\\).\n\nThe circuit is a two-stage, shunt-feedback **transimpedance amplifier**.\n\n## Small-signal analysis\n\nThe feedback current, referenced in the direction shown, is\n\n\\[\ni_{RF}=\\frac{v_o-v_s}{R_F}.\n\\]\n\nSince \\(v_{gs1}=-v_s\\), the incremental current through \\(M_1\\) from its source toward its drain is \\(g_{m1}v_s\\). Applying KCL gives\n\n\\[\ni_{\\text{in}}+i_{RF}=g_{m1}v_s,\n\\tag{1}\n\\]\n\n\\[\n\\frac{v_x}{R_{D1}}=g_{m1}v_s,\n\\tag{2}\n\\]\n\nand at the output node,\n\n\\[\n\\frac{v_o}{R_{D2}}+g_{m2}v_x+i_{RF}=0.\n\\tag{3}\n\\]\n\nFrom (2),\n\n\\[\nv_x=g_{m1}R_{D1}v_s.\n\\]\n\nDefine\n\n\\[\n\\Delta\n=1+g_{m1}(R_F+R_{D2})\n+g_{m1}g_{m2}R_{D1}R_{D2}.\n\\]\n\nSolving the equations gives\n\n\\[\n\\boxed{\\frac{v_s}{i_{\\text{in}}}\n=\\frac{R_F+R_{D2}}{\\Delta}}\n\\]\n\nand therefore the input resistance is\n\n\\[\n\\boxed{R_{\\text{in}}\n=\\frac{R_F+R_{D2}}{\\Delta}}.\n\\]\n\nThe output transimpedance is\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{\\text{in}}}\n=\n\\frac{R_{D2}\n\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)}\n{\\Delta}\n}.\n\\]\n\nThe feedback current is\n\n\\[\n\\boxed{\n\\frac{i_{RF}}{i_{\\text{in}}}\n=\n-\\frac{1+g_{m1}g_{m2}R_{D1}R_{D2}}\n{\\Delta}\n}.\n\\]\n\nThe minus sign results from the reference direction shown for \\(i_{RF}\\). Thus, for a positive input current, the actual signal current through \\(R_F\\) flows from the input node toward the output node.\n\nThe voltage gain from the source of \\(M_1\\) to the output is\n\n\\[\n\\boxed{\n\\frac{v_o}{v_s}\n=\n\\frac{R_{D2}}{R_F+R_{D2}}\n\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)\n}.\n\\]\n\n## High-loop-gain behavior\n\nWhen the transistor gain is sufficiently high,\n\n\\[\ng_{m1}g_{m2}R_{D1}R_{D2}\n\\gg 1+g_{m1}(R_F+R_{D2}),\n\\]\n\nand the forward gain dominates the direct feedthrough through \\(R_F\\). Then\n\n\\[\n\\boxed{i_{RF}\\approx -i_{\\text{in}}}\n\\]\n\nand\n\n\\[\n\\boxed{v_o\\approx -R_F i_{\\text{in}}}.\n\\]\n\nThus the feedback resistor sets the transimpedance gain, much like the feedback resistor of an op-amp transimpedance amplifier. The input node is held at a low small-signal resistance, and the input current is mainly diverted through \\(R_F\\).\n\nWith the input current source set to zero, the approximate output resistance is\n\n\\[\n\\boxed{\nR_{\\text{out}}\n=\n\\left[\n\\frac{1}{R_{D2}}\n+\n\\frac{g_{m1}(1+g_{m2}R_{D1})}\n{1+g_{m1}R_F}\n\\right]^{-1}\n}\n\\]\n\nunder the same \\(r_o\\to\\infty\\) assumption.\n\n## DC bias equations\n\nIf \\(I_{\\text{in}}\\) is a dc current, let \\(I_{D1}\\) flow from \\(X\\) to the source of \\(M_1\\), and \\(I_{D2}\\) flow from the drain of \\(M_2\\) to ground. The dc equations are\n\n\\[\nI_{D1}=\\frac{V_{DD}-V_X}{R_{D1}},\n\\]\n\n\\[\nI_{D1}+I_{\\text{in}}\n=\\frac{V_S-V_O}{R_F},\n\\]\n\n\\[\n\\frac{V_{DD}-V_O}{R_{D2}}\n=\nI_{D2}+\\frac{V_O-V_S}{R_F}.\n\\]\n\nIf both devices are in saturation,\n\n\\[\nI_{D1}=\\frac{k_1}{2}(V_b-V_S-V_{T1})^2,\n\\]\n\n\\[\nI_{D2}=\\frac{k_2}{2}(V_X-V_{T2})^2.\n\\]\n\nThe saturation conditions are approximately\n\n\\[\nV_X\\ge V_b-V_{T1}\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nV_O\\ge V_X-V_{T2}\n\\]\n\nfor \\(M_2\\).",
        "format": "markdown",
        "sha256": "899ec3dcc28f017cfcde3b13400f06cdfb1dc6b6ba01d83f5583096f735be1c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly models M1 as the common-gate input device and M2 as the common-source stage driven by X, with RF feeding back from Vout to the input node. The equations and conclusions correctly describe negative-feedback transimpedance behavior, including the high-gain limit of approximately −RF and low input resistance.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 47317,
        "total_tokens": 49595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 46100,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 47317,
        "total_tokens": 49595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 46100,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are NMOS devices biased in saturation, \\(V_b\\) is an ac ground, and initially neglect \\(r_o\\) and capacitances. Let \\(v_s\\) be the source voltage of \\(M_1\\), \\(v_x\\) the voltage at node \\(X\\), and \\(v_o=V_{\\text{out}}\\).\n\nThe circuit is a **common-gate/common-source transimpedance amplifier with negative shunt feedback** through \\(R_F\\).\n\n### Small-signal equations\n\nSince the gate of \\(M_1\\) is ac-grounded, its incremental source-to-drain current is \\(g_{m1}v_s\\). Thus, at node \\(X\\),\n\n\\[\n\\frac{v_x}{R_{D1}}=g_{m1}v_s\n\\]\n\nor\n\n\\[\nv_x=g_{m1}R_{D1}v_s.\n\\]\n\nThe current through the feedback resistor, in the direction shown, is\n\n\\[\ni_{RF}=\\frac{v_o-v_s}{R_F}.\n\\]\n\nKCL at the input node gives\n\n\\[\ni_{\\text{in}}\n=g_{m1}v_s+\\frac{v_s-v_o}{R_F}.\n\\]\n\nKCL at the output node gives\n\n\\[\n\\frac{v_o}{R_{D2}}+g_{m2}v_x+\\frac{v_o-v_s}{R_F}=0.\n\\]\n\nDefine the open-loop voltage-gain magnitude\n\n\\[\nA_0=g_{m1}g_{m2}R_{D1}R_{D2}.\n\\]\n\nSolving the above equations,\n\n\\[\n\\frac{v_o}{v_s}\n=\n\\frac{R_{D2}-A_0R_F}{R_F+R_{D2}}.\n\\]\n\nTherefore, the closed-loop transimpedance is\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{\\text{in}}}\n=\n\\frac{R_{D2}-A_0R_F}\n{g_{m1}(R_F+R_{D2})+1+A_0}\n}\n\\]\n\nand the input resistance is\n\n\\[\n\\boxed{\nR_{\\text{in}}\n=\n\\frac{v_s}{i_{\\text{in}}}\n=\n\\frac{R_F+R_{D2}}\n{g_{m1}(R_F+R_{D2})+1+A_0}\n}.\n\\]\n\nFor the feedback current,\n\n\\[\n\\boxed{\n\\frac{i_{RF}}{i_{\\text{in}}}\n=\n-\\frac{1+A_0}\n{g_{m1}(R_F+R_{D2})+1+A_0}\n}\n\\]\n\nwhere the minus sign results from the direction of the \\(i_{RF}\\) arrow in the figure.\n\n### Usual feedback approximation\n\nIf the loading of \\(R_F\\) on \\(R_{D2}\\) is neglected, then\n\n\\[\n\\frac{v_o}{v_s}\\simeq -A_0\n\\]\n\nand\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{\\text{in}}}\n\\simeq\n-\\frac{A_0R_F}\n{1+A_0+g_{m1}R_F}\n}.\n\\]\n\nEquivalently, defining\n\n\\[\nK=g_{m2}R_{D1}R_{D2},\n\\]\n\n\\[\n\\frac{v_o}{i_{\\text{in}}}\n\\simeq\n-\\frac{KR_F}{K+R_F+1/g_{m1}}.\n\\]\n\nIf the loop gain is large,\n\n\\[\n\\frac{K}{R_F}\\gg 1,\n\\]\n\nthen the circuit behaves as an ideal transimpedance amplifier:\n\n\\[\n\\boxed{v_o\\simeq -R_F i_{\\text{in}}}.\n\\]\n\nAlso,\n\n\\[\ni_{RF}\\simeq -i_{\\text{in}},\n\\]\n\nmeaning that the actual feedback current flows from the input node toward the output, opposite to the arrow shown. The input node is held near ac ground, so the feedback effectively sets the transimpedance to \\(-R_F\\).\n\nWith the input current source deactivated, the small-signal output resistance is approximately\n\n\\[\n\\boxed{\nR_{\\text{out}}\n=\n\\left[\n\\frac{1}{R_{D2}}\n+\n\\frac{g_{m1}(1+g_{m2}R_{D1})}\n{1+g_{m1}R_F}\n\\right]^{-1}\n}.\n\\]\n\nThese results assume \\(r_{o1},r_{o2}\\to\\infty\\); finite output resistances and body effect can be included by using the corresponding small-signal nodal equations.",
        "format": "markdown",
        "sha256": "a8abfd355d0699926ef24baaac3624ee04a5f6458fd838379e31960b4aa9b557"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input node, forming a transimpedance amplifier. The analysis also gives consistent small-signal results under its stated assumptions; it meets the full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 35728,
        "total_tokens": 38006,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34704,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 35728,
        "total_tokens": 38006,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34704,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **shunt–shunt feedback transimpedance amplifier**. \\(M_1\\) is used in common-gate configuration, \\(M_2\\) is a common-source stage, and \\(R_F\\) feeds an output-dependent current back to the input node.\n\nAssume both MOSFETs are in saturation, \\(V_b\\) is an ac ground, \\(V_{DD}\\) is an ac ground, and \\(r_o\\) and body effect are neglected.\n\nLet\n\n- \\(v_s\\): voltage at the source of \\(M_1\\), i.e. the input node,\n- \\(v_x\\): voltage at node \\(X\\),\n- \\(v_o\\): output voltage.\n\nDefine \\(i_{RF}\\) in the direction shown, from the output toward the input:\n\n\\[\ni_{RF}=\\frac{v_o-v_s}{R_F}.\n\\]\n\nFor \\(M_1\\), since \\(v_{gs1}=-v_s\\), the incremental current from its source toward its drain is \\(g_{m1}v_s\\). Therefore,\n\n\\[\n\\frac{v_x}{R_{D1}}=g_{m1}v_s\n\\]\n\nor\n\n\\[\nv_x=g_{m1}R_{D1}v_s. \\tag{1}\n\\]\n\nAt the output node,\n\n\\[\n\\frac{v_o}{R_{D2}}+\\frac{v_o-v_s}{R_F}+g_{m2}v_x=0. \\tag{2}\n\\]\n\nAt the input node,\n\n\\[\ni_{\\mathrm{in}}\n=g_{m1}v_s+\\frac{v_s-v_o}{R_F}. \\tag{3}\n\\]\n\nDefine\n\n\\[\nK=g_{m1}g_{m2}R_{D1}\n\\]\n\nand\n\n\\[\n\\Delta=\n1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}.\n\\]\n\nSolving the above equations gives\n\n\\[\n\\boxed{\\frac{v_s}{i_{\\mathrm{in}}}\n=\\frac{R_F+R_{D2}}{\\Delta}}\n\\]\n\nand\n\n\\[\n\\boxed{\\frac{v_x}{i_{\\mathrm{in}}}\n=\\frac{g_{m1}R_{D1}(R_F+R_{D2})}{\\Delta}}.\n\\]\n\nThe closed-loop transimpedance gain is\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{\\mathrm{in}}}\n=\n\\frac{R_{D2}\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)}\n{1+g_{m1}(R_F+R_{D2})\n+g_{m1}g_{m2}R_{D1}R_{D2}}\n}. \\tag{4}\n\\]\n\nThus, the small-signal input resistance is\n\n\\[\n\\boxed{\nR_{\\mathrm{in}}\n=\n\\frac{v_s}{i_{\\mathrm{in}}}\n=\n\\frac{R_F+R_{D2}}\n{1+g_{m1}(R_F+R_{D2})\n+g_{m1}g_{m2}R_{D1}R_{D2}}\n}. \\tag{5}\n\\]\n\nThe feedback current is\n\n\\[\n\\boxed{\n\\frac{i_{RF}}{i_{\\mathrm{in}}}\n=\n-\\frac{1+g_{m1}g_{m2}R_{D1}R_{D2}}\n{\\Delta}\n}. \\tag{6}\n\\]\n\nFor large loop gain,\n\n\\[\ni_{RF}\\approx -i_{\\mathrm{in}},\n\\]\n\nwhere the negative sign is due to the reference direction shown in the figure. Hence, the actual feedback current flows approximately from the input node toward the output.\n\nIn the usual high-gain limit, the input node is nearly a virtual ground and\n\n\\[\n\\boxed{v_o\\approx -R_F i_{\\mathrm{in}}}.\n\\]\n\nTherefore, the circuit behaves as a current-to-voltage converter with a transimpedance approximately equal to \\(-R_F\\). With \\(R_F\\) removed, the open-loop transimpedance is\n\n\\[\n\\left.\\frac{v_o}{i_{\\mathrm{in}}}\\right|_{R_F\\to\\infty}\n\\approx -g_{m2}R_{D1}R_{D2}.\n\\]\n\nThe actual dc operating point must be determined from \\(V_{DD}\\), \\(V_b\\), the dc component of \\(I_{\\mathrm{in}}\\), and the MOSFET parameters; both devices must remain in saturation for the above small-signal results to apply.",
        "format": "markdown",
        "sha256": "542f98c0cef363f3ce0510ca486d7f297a20176d783a625bb4520d50a9a12410"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from the output to the input, forming a transimpedance amplifier. Its negative-feedback interpretation, high-gain transimpedance, and input-resistance analysis are also consistent.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 48154,
        "total_tokens": 50432,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 47136,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 48154,
        "total_tokens": 50432,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 47136,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(V_x\\) be the node joining the source of \\(M_1\\), the drain of \\(M_2\\), and the current sources. The symbol indicates that \\(M_1\\) is an NMOS and \\(M_2\\) is a PMOS. Assume both devices are in saturation and the current sources are ideal.\n\n## DC operation\n\nLet the lower current sink be \\(I_B\\), and let \\(I_2\\) be the current supplied by \\(M_2\\) into node \\(x\\).\n\nAt the output node,\n\n\\[\nI_{D1}=I_1 .\n\\]\n\nAt node \\(x\\),\n\n\\[\nI_B=I_{\\mathrm{in}}+I_1+I_2,\n\\]\n\nso\n\n\\[\nI_2=I_B-I_1-I_{\\mathrm{in}}.\n\\]\n\nIgnoring channel-length modulation, the MOS equations are\n\n\\[\nI_1=\\frac{\\beta_1}{2}\n\\left(V_b-V_x-V_{TN}\\right)^2\n\\]\n\nand\n\n\\[\nI_2=\\frac{\\beta_2}{2}\n\\left(V_{DD}-V_{\\mathrm{out}}-|V_{TP}|\\right)^2 .\n\\]\n\nThus,\n\n\\[\nV_x=V_b-V_{TN}-\\sqrt{\\frac{2I_1}{\\beta_1}}\n\\]\n\nand\n\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=\nV_{DD}-|V_{TP}|\n-\\sqrt{\\frac{2(I_B-I_1-I_{\\mathrm{in}})}{\\beta_2}}\n}\n\\]\n\nprovided \\(M_1\\) and \\(M_2\\) remain in saturation.\n\nAn increase in \\(I_{\\mathrm{in}}\\) reduces the current required from \\(M_2\\). Since \\(M_2\\) is a PMOS, its gate voltage must increase, so \\(V_{\\mathrm{out}}\\) increases.\n\n---\n\n## Small-signal operation\n\nLet\n\n\\[\ng_{mi}=\\text{transconductance of }M_i,\\qquad\ng_{dsi}=\\frac{1}{r_{oi}} .\n\\]\n\nSince \\(V_b\\) and \\(V_{DD}\\) are ac grounds, the incremental drain current of \\(M_1\\), defined from drain to source, is\n\n\\[\n\\delta i_{D1}\n=\ng_{ds1}v_o-(g_{m1}+g_{ds1})v_x.\n\\]\n\nThe current supplied by the PMOS \\(M_2\\) into node \\(x\\) changes by\n\n\\[\n\\delta i_2=-g_{m2}v_o-g_{ds2}v_x.\n\\]\n\nBecause \\(I_1\\) is ideal, its incremental current is zero. Therefore, the output-node equation gives\n\n\\[\n\\delta i_{D1}=0,\n\\]\n\nor\n\n\\[\nv_o=\n\\left(1+g_{m1}r_{o1}\\right)v_x .\n\\]\n\nDefine\n\n\\[\nA_1=1+g_{m1}r_{o1}.\n\\]\n\nThe input current then satisfies\n\n\\[\ni_{\\mathrm{in}}\n=\ng_{m2}v_o+g_{ds2}v_x.\n\\]\n\nUsing \\(v_o=A_1v_x\\),\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{\\mathrm{in}}}\n=\n\\frac{A_1}{g_{m2}A_1+g_{ds2}}\n}\n\\]\n\nwhich is the transimpedance gain.\n\nThe input resistance is\n\n\\[\n\\boxed{\nR_{\\mathrm{in}}\n=\n\\frac{v_x}{i_{\\mathrm{in}}}\n=\n\\frac{1}{g_{m2}A_1+g_{ds2}}\n}\n\\]\n\nor, approximately,\n\n\\[\n\\boxed{\nR_{\\mathrm{in}}\n\\simeq\n\\frac{1}{g_{m1}g_{m2}r_{o1}}\n}\n\\]\n\nwhen \\(g_{m1}r_{o1}\\gg 1\\) and \\(g_{ds2}\\) is small.\n\nHence, neglecting channel-length modulation,\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{\\mathrm{in}}}\\simeq \\frac{1}{g_{m2}}\n}\n\\]\n\nand a positive input current produces a positive output voltage.\n\nThe voltage gain from node \\(x\\) to the output is\n\n\\[\n\\boxed{\n\\frac{v_o}{v_x}=1+g_{m1}r_{o1}\n}\n\\]\n\nso \\(M_1\\) provides a large feedback gain and forces node \\(x\\) to have a very small signal voltage.\n\nFor completeness, the small-signal output resistance looking into \\(V_{\\mathrm{out}}\\), with the input current source turned off, is\n\n\\[\n\\boxed{\nR_{\\mathrm{out}}\n=\n\\frac{g_{m1}+g_{ds1}+g_{ds2}}\n{g_{ds1}g_{ds2}+g_{m2}(g_{m1}+g_{ds1})}\n}\n\\]\n\nwhich is approximately \\(1/g_{m2}\\) under usual conditions.",
        "format": "markdown",
        "sha256": "b969c536c370bbfec75e1f6624cabca666088e5db5c53c3e8caf6c94623d176a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device and PMOS feedback device, derives the feedback action and very low input resistance, and obtains the expected transimpedance and output-resistance limits.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 57569,
        "total_tokens": 59736,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 56460,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 57569,
        "total_tokens": 59736,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 56460,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_x\\) be the node joining the source of \\(M_1\\), the drain of \\(M_2\\), \\(I_{\\rm in}\\), and the lower bias current source. Let \\(v_o=V_{\\rm out}\\).\n\nThe transistor connections are\n\n- \\(M_1\\): nMOS, \\(G=V_b,\\ S=v_x,\\ D=v_o\\)\n- \\(M_2\\): pMOS, \\(S=V_{DD},\\ D=v_x,\\ G=v_o\\)\n\nAssume both MOSFETs are in saturation and the current sources are ideal.\n\n## DC analysis\n\nAt the output node, \\(I_1\\) must flow through \\(M_1\\):\n\n\\[\nI_{D1}=I_1.\n\\]\n\nAt node \\(v_x\\), taking \\(I_{\\rm in,dc}\\) as positive in the direction shown,\n\n\\[\nI_0=I_{D1}+I_{SD2}+I_{\\rm in,dc},\n\\]\n\nso that\n\n\\[\nI_{SD2}=I_0-I_1-I_{\\rm in,dc}.\n\\]\n\nHere \\(I_{SD2}\\) is the pMOS current from \\(V_{DD}\\) toward \\(v_x\\).\n\nNeglecting channel-length modulation,\n\n\\[\nI_1=\\frac{\\beta_1}{2}\n\\left(V_b-v_x-V_{TN}\\right)^2\n\\]\n\nand\n\n\\[\nI_0-I_1-I_{\\rm in,dc}\n=\n\\frac{\\beta_2}{2}\n\\left(V_{DD}-v_o-|V_{TP}|\\right)^2.\n\\]\n\nThus,\n\n\\[\nv_x\n=\nV_b-V_{TN}\n-\\sqrt{\\frac{2I_1}{\\beta_1}}\n\\]\n\nand\n\n\\[\nv_o\n=\nV_{DD}-|V_{TP}|\n-\\sqrt{\\frac{2(I_0-I_1-I_{\\rm in,dc})}{\\beta_2}}.\n\\]\n\nFor zero dc input current, \\(I_{\\rm in,dc}=0\\).\n\nThe saturation conditions include\n\n\\[\nv_o\\ge V_b-V_{TN}\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nv_o\\ge v_x+|V_{TP}|,\n\\qquad\nv_o<V_{DD}-|V_{TP}|\n\\]\n\nfor \\(M_2\\).\n\n---\n\n## Small-signal analysis\n\nAt signal frequencies, \\(V_{DD}\\) and \\(V_b\\) are ac grounds. Let\n\n\\[\ng_{oi}=\\frac{1}{r_{oi}}.\n\\]\n\nThe small-signal current of \\(M_1\\), flowing from \\(v_o\\) to \\(v_x\\), is\n\n\\[\ni_1=g_{o1}v_o-(g_{m1}+g_{o1})v_x.\n\\]\n\nThe small-signal current supplied by \\(M_2\\) into node \\(v_x\\) is\n\n\\[\ni_2=-g_{m2}v_o-g_{o2}v_x.\n\\]\n\nBecause \\(I_1\\) is ideal and the output is unloaded, the output-node ac KCL gives\n\n\\[\ng_{o1}v_o-(g_{m1}+g_{o1})v_x=0.\n\\]\n\nThe \\(v_x\\)-node KCL gives\n\n\\[\n(g_{m1}+g_{o1}+g_{o2})v_x\n+\n(g_{m2}-g_{o1})v_o\n=\ni_{\\rm in}.\n\\]\n\nDefine\n\n\\[\nA=g_{m1}+g_{o1},\\qquad\nB=g_{o1},\\qquad\nC=g_{o2}.\n\\]\n\nThen\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{\\rm in}}\n=\n\\frac{A}{A g_{m2}+BC}\n}\n\\]\n\nor, equivalently,\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{\\rm in}}\n=\n\\frac{1+g_{m1}r_{o1}}\n{g_{m2}(1+g_{m1}r_{o1})+g_{o2}}\n}.\n\\]\n\nThe input resistance is\n\n\\[\n\\boxed{\nR_{\\rm in}\n=\n\\frac{v_x}{i_{\\rm in}}\n=\n\\frac{B}{A g_{m2}+BC}\n}.\n\\]\n\nThe output resistance, found by applying a test current at \\(v_o\\), is\n\n\\[\n\\boxed{\nR_{\\rm out}\n=\n\\frac{A+C}{A g_{m2}+BC}\n}.\n\\]\n\nIf channel-length modulation is neglected,\n\n\\[\ng_{o1},g_{o2}\\rightarrow 0,\n\\]\n\nand the circuit simplifies to\n\n\\[\n\\boxed{v_x\\approx 0}\n\\]\n\nand\n\n\\[\n\\boxed{\nv_o\\approx \\frac{i_{\\rm in}}{g_{m2}}\n}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{R_{\\rm in}\\approx 0,\\qquad\nR_{\\rm out}\\approx \\frac{1}{g_{m2}}.}\n\\]\n\nThus, the circuit acts as a low-input-resistance transimpedance amplifier. A positive input current raises \\(V_{\\rm out}\\); this raises the gate voltage of the pMOS \\(M_2\\), reducing its current and balancing the input current.",
        "format": "markdown",
        "sha256": "0c4db62a585db99dada679f4ef6bb35cbd5b379b0b99dfc4f26ccbb8fbb44cb7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device and PMOS feedback device, explains feedback from Vout to the input node, and derives the expected low input resistance and vout/iin and Rout of approximately 1/gm2.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 47321,
        "total_tokens": 49488,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 46166,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 47321,
        "total_tokens": 49488,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 46166,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(X\\) denote the common node connected to the source of \\(M_1\\), the drain of \\(M_2\\), \\(I_{\\rm in}\\), and the lower bias current source. The devices are assumed to be in saturation:\n\n- \\(M_1\\): NMOS, \\(D=V_{\\rm out}\\), \\(S=X\\), \\(G=V_b\\)\n- \\(M_2\\): PMOS, \\(S=V_{DD}\\), \\(D=X\\), \\(G=V_{\\rm out}\\)\n\nLet the lower current sink be \\(I_B\\).\n\n## DC operation\n\nSince the gate of \\(M_2\\) draws no dc current, the current source \\(I_1\\) flows through \\(M_1\\):\n\n\\[\nI_{D1}=I_1.\n\\]\n\nApplying KCL at node \\(X\\),\n\n\\[\nI_B=I_1+I_2+I_{\\rm in},\n\\]\n\nwhere \\(I_2\\) is the current supplied by \\(M_2\\) from \\(V_{DD}\\) to \\(X\\). Thus,\n\n\\[\nI_2=I_B-I_1-I_{\\rm in}.\n\\]\n\nFor zero input current,\n\n\\[\nI_{2Q}=I_B-I_1,\n\\]\n\nso \\(I_B>I_1\\) is required for \\(M_2\\) to conduct.\n\nIgnoring channel-length modulation, the node voltages are\n\n\\[\nV_X=V_b-V_{TN}-\\sqrt{\\frac{2I_1}{\\beta_1}},\n\\]\n\nand\n\n\\[\nV_{\\rm out}\n=V_{DD}-|V_{TP}|\n-\\sqrt{\\frac{2(I_B-I_1-I_{\\rm in})}{\\beta_2}}.\n\\]\n\nThus, increasing \\(I_{\\rm in}\\) reduces the current in \\(M_2\\), causing \\(V_{\\rm out}\\) to increase.\n\nThe saturation conditions are approximately\n\n\\[\nV_{\\rm out}\\ge V_b-V_{TN}\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nV_{DD}-V_X\\ge V_{DD}-V_{\\rm out}-|V_{TP}|\n\\]\n\nfor \\(M_2\\).\n\n## Small-signal operation\n\nAssume the current sources are ideal, so their incremental currents are zero. Also, \\(V_{DD}\\) and \\(V_b\\) are ac grounds.\n\nIf channel-length modulation is neglected,\n\n\\[\n\\Delta i_{D1}=-g_{m1}v_X.\n\\]\n\nSince the current through the ideal source \\(I_1\\) cannot change,\n\n\\[\n\\Delta i_{D1}=0,\n\\]\n\nwhich gives\n\n\\[\nv_X\\simeq 0.\n\\]\n\nTherefore, node \\(X\\) is a virtual ac ground.\n\nA positive \\(v_{\\rm out}\\) reduces the current supplied by the PMOS \\(M_2\\). Hence, KCL at \\(X\\) gives\n\n\\[\ni_{\\rm in}=g_{m2}v_{\\rm out}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\\frac{v_{\\rm out}}{i_{\\rm in}}\\simeq \\frac{1}{g_{m2}}}\n\\]\n\nwith a positive sign for the current direction shown. The circuit is therefore a current-to-voltage converter, or transimpedance amplifier.\n\nIn the ideal small-signal model,\n\n\\[\n\\boxed{R_{\\rm in}\\simeq 0}.\n\\]\n\n## Including transistor output resistances\n\nLet \\(g_{oi}=1/r_{oi}\\). With an ideal \\(I_1\\),\n\n\\[\ng_{o1}v_{\\rm out}-(g_{m1}+g_{o1})v_X=0,\n\\]\n\nso\n\n\\[\nA\\equiv \\frac{v_{\\rm out}}{v_X}\n=1+\\frac{g_{m1}}{g_{o1}}\n=1+g_{m1}r_{o1}.\n\\]\n\nThen\n\n\\[\n\\boxed{R_{\\rm in}\n=\\frac{1}{g_{o2}+g_{m2}A}}\n\\]\n\nand\n\n\\[\n\\boxed{\\frac{v_{\\rm out}}{i_{\\rm in}}\n=\\frac{A}{g_{o2}+g_{m2}A}}.\n\\]\n\nFor large \\(A\\) and small \\(g_{o2}\\), these reduce to\n\n\\[\nR_{\\rm in}\\approx \\frac{1}{g_{m2}A}\\ll \\frac{1}{g_{m2}},\n\\qquad\n\\frac{v_{\\rm out}}{i_{\\rm in}}\\approx \\frac{1}{g_{m2}}.\n\\]\n\nThus, \\(M_1\\) provides the feedback that holds node \\(X\\) at a very low small-signal voltage, while \\(M_2\\) determines the transimpedance.",
        "format": "markdown",
        "sha256": "eb1054b9977e4d5b8dd50fa59442483befdb015e9275efa338146c28b4f08eb8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS M1 and PMOS M2 connections, describes Vout controlling M2’s current back into the input node, and derives very low input resistance with vout/iin approximately 1/gm2. The finite-ro values are also consistent with the feedback loop.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 32126,
        "total_tokens": 34293,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 32126,
        "total_tokens": 34293,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—not for any **finite** capacitance, assuming the inverters can supply a nonzero output current.\n\nThe capacitor slows each transition:\n\n\\[\nt_{\\text{edge}}\\sim \\frac{C_L V_{\\text{DD}}}{I_{\\text{drive}}}\n\\]\n\nor, using an effective output resistance,\n\n\\[\nt_{pd}\\approx 0.69R_{\\text{out}}C_L.\n\\]\n\nFor three inverters, the period is approximately\n\n\\[\nT\\approx 6t_{pd},\n\\]\n\nso the oscillation frequency decreases roughly as \\(1/C_L\\). The odd number of inversions still causes the transition to propagate around the loop.\n\nIn the mathematical limit \\(C_L\\to\\infty\\), however, \\(T\\to\\infty\\) and \\(f\\to0\\); the capacitor voltages cannot change with finite drive current, so the circuit effectively stops. In a real circuit, leakage, limited drive current, and practical observation time impose a similar limit.",
        "format": "markdown",
        "sha256": "f9d51464c0383b9545d3f7fa285d3ccfb11f74e5a03dab681743e4fba3336be5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly says that for any finite, arbitrarily large capacitance the ring continues oscillating at a lower frequency, and supports this with the increased-delay argument. The infinite-capacitance limit caveat does not change that answer for finite capacitors.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 5913,
        "total_tokens": 8110,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 5913,
        "total_tokens": 8110,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For any **finite** value of \\(C_L\\), the circuit does not fundamentally stop oscillating; it simply oscillates more slowly.\n\nApproximating each inverter’s output resistance by \\(R_o\\),\n\n\\[\n\\frac{dv}{dt}\\approx \\frac{i_o}{C_L},\n\\]\n\nso the propagation delay is roughly\n\n\\[\nt_p \\approx \\alpha R_o C_L,\n\\]\n\nwhere \\(\\alpha\\) depends on the switching threshold. A three-inverter ring has approximately\n\n\\[\nT \\approx 6t_p,\\qquad f_{\\text{osc}}\\approx \\frac{1}{6t_p}\\propto \\frac{1}{C_L}.\n\\]\n\nThus, as the capacitors become larger, the frequency approaches zero, but every finite capacitance still permits a transition eventually.\n\nFor the strict limit \\(C_L=\\infty\\), a finite inverter current cannot change the capacitor voltage:\n\n\\[\n\\frac{dv}{dt}=\\frac{i_o}{C_L}=0.\n\\]\n\nThe nodes are effectively frozen and the period is infinite, so there is no oscillation in finite time. In practice, sufficiently large capacitors may also make startup and operation impractical because of leakage, slow edges, and power dissipation.",
        "format": "markdown",
        "sha256": "b0e887c9be1806173ba78ef1ed94e9c2b78dd57c02a8cfd1627c195a2c79aa77"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that every finite, arbitrarily large capacitance slows the ring rather than stopping it, and supports this with the valid RC-delay argument. The exact-infinite-capacitance caveat is a mathematical boundary distinction and does not change the answer for arbitrarily large finite capacitors.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 7516,
        "total_tokens": 9713,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 7516,
        "total_tokens": 9713,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—not for any **finite** capacitor value, assuming ordinary finite-current inverter drivers and a startup perturbation.\n\nThe capacitors simply increase each inverter’s propagation delay. Approximately,\n\n\\[\nt_p \\sim \\frac{C_L\\Delta V}{I_{\\text{drive}}}\n\\quad\\text{or}\\quad\nt_p\\approx 0.69R_{\\text{out}}C_L .\n\\]\n\nFor three inverters,\n\n\\[\nT \\approx 6t_p,\\qquad f\\approx \\frac{1}{6t_p}\\propto \\frac{1}{C_L}.\n\\]\n\nThus, as \\(C_L\\) becomes larger, the oscillator becomes slower and its startup time becomes longer, but it still oscillates for every finite \\(C_L\\). In the mathematical limit \\(C_L\\to\\infty\\), the capacitors cannot be charged or discharged in finite time, so \\(T\\to\\infty\\) and the oscillation frequency tends to zero. Real circuits may appear to stop earlier because of leakage, finite drive current, noise, or an observation time that is too short.",
        "format": "markdown",
        "sha256": "489d4d0b1222cc7d2ddbc144f2aa112e1b3fa7b5bf41a5b5fe5d8e68005c77ac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating for every finite capacitance, with delay increasing and frequency decreasing approximately as 1/CL. The limiting infinite-capacitance observation does not change that conclusion.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 5416,
        "total_tokens": 7613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 5416,
        "total_tokens": 7613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the inverters, supply, and bias currents remain unchanged:\n\n- The inverter delay is approximately \\(t_d \\propto C_L\\), so doubling \\(C_L\\) doubles the period and halves the oscillation frequency.\n- The signal charge at each node doubles, \\(q_{\\max}\\approx C_LV_{\\text{sw}}\\). Thus, the same device-noise current produces a smaller phase perturbation.\n\nFor the usual white-noise model,\n\n\\[\n\\mathcal L(\\Delta f)\\propto\n\\frac{S_i}{(C_LV_{\\text{sw}})^2(2\\pi\\Delta f)^2}.\n\\]\n\nTherefore, at the same absolute offset frequency,\n\n\\[\n\\mathcal L_{\\text{new}}=\\frac{1}{4}\\mathcal L_{\\text{old}},\n\\]\n\nor approximately **6 dB lower phase noise**. The tradeoff is a roughly **twofold lower oscillation frequency** and slower edges.\n\nStrictly, the exact result depends on what is held constant and on the inverter noise model. At the same *fractional* offset from the carrier, the simple white-noise result is approximately unchanged.",
        "format": "markdown",
        "sha256": "445d2fdb48504c2d60ce3185f1b3ab246ed916dda3e1d1e8b0a2a54f8f0d1fe8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors approximately halves the oscillation frequency and reduces phase noise by a factor of four (6 dB) at a fixed absolute offset; it also correctly notes the unchanged result at a fixed fractional offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 43874,
        "total_tokens": 46068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 43625,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 43874,
        "total_tokens": 46068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 43625,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the inverter sizes and bias currents remain unchanged:\n\n- The load seen by each inverter doubles, so the delay per stage doubles and the oscillation frequency approximately halves:\n  \\[\n  f_{\\mathrm{osc,new}}\\approx \\frac{f_{\\mathrm{osc,old}}}{2}.\n  \\]\n- The charge swing at each node is \\(q_{\\max}\\approx C_LV_{\\mathrm{sw}}\\). Since \\(C_L\\) doubles, the phase sensitivity to a given noise current is halved. Using\n  \\[\n  L(\\Delta f)\\propto \\frac{S_i}{(C_LV_{\\mathrm{sw}})^2\\Delta f^2},\n  \\]\n  the phase noise at the same **absolute offset frequency** decreases by a factor of four, or about **6 dB**.\n\nAt the same **fractional offset** \\(\\Delta f/f_{\\mathrm{osc}}\\), the improvement approximately cancels because the carrier frequency also halves, so the phase noise is roughly unchanged. The exact result depends on the bias/noise model and what offset is being compared.",
        "format": "markdown",
        "sha256": "a9a561c4bfe8e11205edd6f89cef3ff7560fdaf4bdb3836b1ec3e143aa880e11"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubled capacitance approximately halves the oscillation frequency and lowers phase noise by about a factor of four (6 dB) at a fixed absolute offset; it also correctly notes the unchanged result at a fixed fractional offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 12146,
        "total_tokens": 14340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 12146,
        "total_tokens": 14340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the inverter bias and device noise remain unchanged:\n\n- The delay of each stage is approximately \\(t_d \\propto R_{\\text{eq}}C_L\\), so doubling all three capacitors makes the oscillation frequency roughly half:\n  \\[\n  f_{o,\\text{new}}\\approx \\frac{f_{o,\\text{old}}}{2}.\n  \\]\n\n- In the white-noise, close-in region, the phase-noise density approximately scales as\n  \\[\n  \\mathcal L(\\Delta f)\\propto\n  \\frac{1}{(C_L V_{\\text{swing}})^2\\Delta f^2}.\n  \\]\n  Thus, at the same **absolute frequency offset**, doubling \\(C_L\\) reduces the phase noise by a factor of four, or about **6 dB**.\n\nIf phase noise is compared at the same **normalized offset** \\(\\Delta f/f_o\\), the offset also halves, and this improvement approximately cancels—so the normalized phase noise is nearly unchanged.",
        "format": "markdown",
        "sha256": "5c1bade710030a5904ad98437da32525a1cc6693ab43c36a217ad4e155e49b04"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors roughly halves the oscillation frequency and reduces phase noise by about a factor of four (6 dB) at a fixed absolute offset; it also correctly notes the unchanged result at a fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 15242,
        "total_tokens": 17436,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 15242,
        "total_tokens": 17436,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For any **finite** \\(C_L\\), the oscillator does not have a fundamental capacitance cutoff in the usual ring-oscillator model. The loaded inverter must charge and discharge\n\n\\[\nQ=C_L\\Delta V,\n\\]\n\nso its propagation delay grows approximately as\n\n\\[\nt_{p,L}\\approx 0.69R_{\\text{out}}C_L\n\\]\n\n(or \\(C_L\\Delta V/I_{\\text{drive}}\\) for a current-limited driver). Thus,\n\n\\[\nT\\approx 2(t_{p1}+t_{p2}+t_{p3}),\n\\]\n\nand, when \\(C_L\\) dominates,\n\n\\[\nf_{\\text{osc}}\\propto \\frac{1}{C_L}.\n\\]\n\nSo increasing \\(C_L\\) makes the oscillation slower; it does not suddenly stop it under an ideal delay-gate model.\n\nHowever, in the strict limit \\(C_L\\to\\infty\\), the required charge and delay become infinite, so \\(f_{\\text{osc}}\\to0\\)—an actually infinite capacitor cannot oscillate. Also, in a real CMOS circuit, a sufficiently large finite capacitance can cause the slow node to remain in the inverter transition region, allowing the loop to settle rather than produce full-swing oscillations. Thus the ideal answer is “no finite cutoff,” while practical circuits do have a maximum usable load.",
        "format": "markdown",
        "sha256": "04cbb67e2fdf13f56cf65443e788d58fc2de3c6310eeb532ba73d1a45b1f580a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly notes that a sufficiently large finite load in a real CMOS circuit can slow the loaded node enough for the loop to settle, which is an acceptable time-domain explanation. However, it foregrounds an ideal delay-gate model with no finite cutoff and misses the actual dominant-pole and loop-gain explanation for the circuit.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 13242,
        "total_tokens": 15294,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 13242,
        "total_tokens": 15294,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—not for any **finite** \\(C_L\\), assuming the inverters have finite output drive and the usual ring-oscillator model applies.\n\nLet \\(v_x\\) be the capacitor node. The inverter output charges or discharges it, so\n\n\\[\n\\frac{dv_x}{dt}\\approx \\frac{I_{\\text{drive}}}{C_L}.\n\\]\n\nA larger \\(C_L\\) therefore makes the transitions slower. The oscillation period is approximately\n\n\\[\nT \\simeq 2(t_{p1}+t_{p2}+t_{p3}),\n\\]\n\nand, if \\(C_L\\) dominates,\n\n\\[\nt_{p1}\\approx 0.69R_{\\text{out}}C_L,\n\\qquad\nf_{\\text{osc}}\\propto \\frac{1}{C_L}.\n\\]\n\nThus the oscillator becomes arbitrarily slow as \\(C_L\\) increases, but it does not stop for any finite value in the idealized model. In the literal limit \\(C_L\\to\\infty\\), the capacitor cannot change voltage with finite current, so \\(f_{\\text{osc}}\\to0\\) and there is no oscillation.\n\nIn a real CMOS circuit, an excessively large load can also cause practical failure—e.g., the loop may settle near the inverters’ switching points because of finite gain, leakage, and limited drive current.",
        "format": "markdown",
        "sha256": "b5cb060db5dec542d27385c3c1e34dfedd40a74e9078dddda22935ae2d8ebad2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The main claim that oscillation cannot fail for any finite CL contradicts the dominant-pole and loop-gain failure in the golden solution; the delay-only ring model misses the key effect of loading just one node. The caveat that a large load can leave the loop near a switching-point state due to finite gain captures part of the accepted failure mechanism, so this earns partial credit.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 16353,
        "total_tokens": 18405,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 16353,
        "total_tokens": 18405,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the usual idealized ring-oscillator model, **no finite value of \\(C_L\\) necessarily stops oscillation**. The first inverter will still charge and discharge the capacitor, although more slowly:\n\n\\[\nt_{\\text{charge/discharge}}\\approx \\frac{C_L\\Delta V}{I_{\\text{drive}}},\n\\qquad\nf_{\\text{osc}}\\propto \\frac{1}{C_L}.\n\\]\n\nThus, as \\(C_L\\) increases, the frequency decreases and the startup time increases. In the strict limit \\(C_L\\to\\infty\\), the capacitor voltage cannot change in finite time, so the period tends to infinity and the circuit effectively ceases to oscillate.\n\nA real CMOS circuit may stop oscillating at a finite, sufficiently large \\(C_L\\) because of finite output current, leakage, limited gain-bandwidth, or stabilization near the inverters’ metastable point.",
        "format": "markdown",
        "sha256": "6df9b7db6e3489859f9d747ba0ff8e95651ab0b5b75d16597b1233c516f256cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that loading slows the node and hints that limited gain-bandwidth or settling may stop oscillation. However, it relies on ordinary ring-oscillator frequency scaling, says no finite load necessarily stops oscillation, and misses the key effect: a capacitor on only one node creates a dominant pole that can violate the loop’s Barkhausen condition.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 14699,
        "total_tokens": 16751,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 14699,
        "total_tokens": 16751,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming all devices in the ring are widened by 2×, with the same \\(V_{DD}\\), channel length, and loading:\n\n- Drive current and \\(g_m\\) increase roughly 2×.\n- Node capacitance and stored charge also increase roughly 2×.\n- The delay, and hence oscillation frequency, remain approximately unchanged because \\(t_d\\sim C/I\\).\n- The phase-noise contribution scales approximately as  \n  \\[\n  S_{\\phi}\\propto \\frac{S_i}{(CV_{\\text{swing}})^2},\n  \\]\n  so it changes by \\(2/2^2=1/2\\).\n\nThus, the thermal-noise-limited phase noise improves by about **3 dB** (is reduced by a factor of two). The tradeoffs are roughly twice the dynamic power and larger area/capacitance. The exact improvement may differ if external loading, bias current, or supply noise dominates.",
        "format": "markdown",
        "sha256": "33f99cbdef6f561eac4c7cd0cc3aeb3425e972dae6cd66f64f3efd6aa68b9dc3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that phase noise falls by about 3 dB and gives the appropriate scaling: noise power doubles while squared signal charge scales by four. The stated frequency and power tradeoffs are also consistent with the golden solution.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3327,
        "output_tokens": 6418,
        "total_tokens": 9745,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3327,
        "output_tokens": 6418,
        "total_tokens": 9745,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling both device widths generally **reduces the phase noise**.\n\nWith \\(L\\), \\(V_{DD}\\), and temperature unchanged:\n\n- \\(g_m\\) and drive current increase roughly in proportion to \\(W\\).\n- Device area increases, reducing flicker-noise density.\n- The oscillator stores roughly twice the charge/energy, so the noise is less significant relative to the signal.\n\nIn the usual ideal scaling assumption, the phase-noise power is approximately inversely proportional to transistor width:\n\n\\[\n\\mathcal{L} \\propto \\frac{1}{W}.\n\\]\n\nThus, doubling the widths gives about a factor-of-two reduction in phase-noise power, or approximately **3 dB lower phase noise**. The increased capacitance and power consumption may alter the exact result and oscillator frequency in a practical circuit.",
        "format": "markdown",
        "sha256": "86e2c0830251f99787982909d906fab7b5ac5b5c44f8d60b6dd454c154b63d75"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the correct approximately 3 dB reduction. Its width-scaling and doubled-charge explanation is consistent with the result; the flicker-noise and practical-circuit caveats do not change the central answer.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 4319,
        "total_tokens": 7646,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 4319,
        "total_tokens": 7646,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The phase noise generally **decreases** (improves) when both NMOS and PMOS widths are doubled.\n\nAssuming the supply and bias conditions remain the same:\n\n- Drive current and \\(g_m\\) increase approximately \\(2\\times\\).\n- Device area increases, reducing flicker noise.\n- Node capacitance also increases approximately \\(2\\times\\), so the oscillation frequency may remain roughly similar.\n- The signal charge increases, reducing the relative effect of device noise.\n\nTypically, the phase-noise power spectral density scales roughly as \\(1/W\\), so doubling the widths gives about a **2× reduction in phase-noise power**, or approximately **3 dB lower phase noise**. The tradeoffs are roughly twice the device area, higher capacitance, and increased power consumption. The exact change depends on the bias current and loading.",
        "format": "markdown",
        "sha256": "41e7177153b34367dc5fe1d3e7d8820c58c27eed816ddaf8c86cae74df3d866f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the correct approximately 3 dB reduction and a broadly consistent scaling explanation: width, drive current, and node capacitance increase, while signal charge grows and power increases. The mention of reduced flicker noise is secondary and does not undermine the conclusion.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 4840,
        "total_tokens": 8167,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 4840,
        "total_tokens": 8167,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure alone does not define a unique \\(R_X\\). A small-signal resistance requires a specified operating point and device model. In normal operation, the ring oscillator is in a periodic switching state, so its supply current is time-varying; the proper quantity is a frequency- and phase-dependent supply impedance \\(Z_{DD}(\\omega)\\), not a single resistance.\n\nIf the intended approximation is the usual linearization about the unstable symmetric point, where all three inverters are at their switching thresholds, define\n\n\\[\nG_p=g_{mp}+g_{op}, \\qquad\nG_n=g_{mn}+g_{on}.\n\\]\n\nA small perturbation \\(v_x\\) on the supply causes the three internal nodes to have the same perturbation \\(v\\), with\n\n\\[\nG_p(v_x-v)=G_n v.\n\\]\n\nThe total incremental supply current is therefore\n\n\\[\ni_x=3G_p(v_x-v)\n   =3\\frac{G_pG_n}{G_p+G_n}v_x,\n\\]\n\nso\n\n\\[\n\\boxed{R_X=\\frac{G_p+G_n}{3G_pG_n}\n      =\\frac{1}{3}\\left(\\frac{1}{G_p}+\\frac{1}{G_n}\\right)}.\n\\]\n\nFor matched devices with \\(g_{mp}=g_{mn}=g_m\\) and \\(g_{op}=g_{on}=g_o\\),\n\n\\[\n\\boxed{R_X=\\frac{2}{3(g_m+g_o)}\n\\approx \\frac{2}{3g_m}}\n\\]\n\nwhen \\(g_o\\ll g_m\\). This is the resistance of the symmetric small-signal model, not of the actual running oscillator.",
        "format": "markdown",
        "sha256": "5303dba12158c3961a4ecc3f53c0f80b46804cce2ca36d3cbe983c7adac4c3d4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a gm-based resistance at the static symmetric operating point, but misses the dominant supply loading from oscillation-driven charging and discharging of the node capacitances. The caveat about periodic operation does not provide the required resistance estimate.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3147,
        "output_tokens": 39219,
        "total_tokens": 42366,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38848,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3147,
        "output_tokens": 39219,
        "total_tokens": 42366,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38848,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "A unique value cannot be obtained from the logic symbols alone. A small-signal resistance must be defined about a particular operating point and with a transistor model.\n\nFor the usual textbook approximation, linearize the three identical CMOS inverters about the symmetric (unstable) dc point, neglect \\(r_o\\) and capacitances. Let \\(v_x\\) be a small perturbation on \\(V_{DD}\\), and let the perturbation at each ring node be \\(v\\). By symmetry, all three ring nodes have the same perturbation. For each inverter,\n\n\\[\ng_{mp}(v_x-v)=g_{mn}v .\n\\]\n\nThus the supply current contributed by one stage is\n\n\\[\ni_{\\text{stage}}\n=\\frac{g_{mp}g_{mn}}{g_{mp}+g_{mn}}v_x .\n\\]\n\nThe three stages are in parallel at the supply node, so\n\n\\[\n\\boxed{\nR_x=\\frac{v_x}{3i_{\\text{stage}}}\n=\\frac{g_{mn}+g_{mp}}{3g_{mn}g_{mp}}\n=\\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n}\n\\]\n\nFor matched NMOS and PMOS transconductances, \\(g_{mn}=g_{mp}=g_m\\),\n\n\\[\n\\boxed{R_x=\\frac{2}{3g_m}} .\n\\]\n\nIf channel-length modulation is included, replace \\(g_{mn}\\) and \\(g_{mp}\\) by \\(g_{mn}+g_{dsn}\\) and \\(g_{mp}+g_{dsp}\\), respectively.\n\nStrictly, while the ring is running, its supply impedance is time-varying and frequency-dependent; the above is the low-frequency resistance about its symmetric metastable operating point.",
        "format": "markdown",
        "sha256": "03ced4026fd69160d642b41c9d1e3dd382ec5b43776486a4ccd9e75c2ed81af1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a consistent static, gm-based resistance about the metastable operating point, but misses the dominant oscillation-driven charging and discharging of the node capacitances. The golden solution explicitly assigns this static-only approach a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 22664,
        "total_tokens": 25811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 22664,
        "total_tokens": 25811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "A single value for \\(R_X\\) requires a specified operating point. The usual interpretation is to linearize the ring about its symmetric (unstable) dc point, where all three inverter nodes are at the switching voltage.\n\nLet\n\n\\[\nG_P=g_{mp}+g_{dsp},\\qquad\nG_N=g_{mn}+g_{dsn},\n\\]\n\nwhere \\(g_{mp},g_{mn}\\) are the MOSFET transconductances and \\(g_{dsp},g_{dsn}\\) are the output conductances.\n\nApplying a test voltage \\(v_x\\) to the supply causes the three ring nodes to have the same small-signal voltage \\(v\\). For each inverter,\n\n\\[\nG_P(v_x-v)=G_Nv,\n\\]\n\nso\n\n\\[\nv=\\frac{G_P}{G_P+G_N}v_x.\n\\]\n\nThe total supply current is three times the current in one pMOS:\n\n\\[\ni_x=3G_P(v_x-v)\n=3\\frac{G_PG_N}{G_P+G_N}v_x.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nR_X=\\frac{v_x}{i_x}\n=\\frac{G_P+G_N}{3G_PG_N}\n=\\frac{1}{3}\\left(\\frac{1}{G_P}+\\frac{1}{G_N}\\right)\n}\n\\]\n\nor explicitly,\n\n\\[\n\\boxed{\nR_X=\\frac{1}{3}\\left[\n\\frac{1}{g_{mp}+g_{dsp}}\n+\\frac{1}{g_{mn}+g_{dsn}}\n\\right].\n}\n\\]\n\nIf output conductances are neglected and the nMOS and pMOS transconductances are equal to \\(g_m\\),\n\n\\[\n\\boxed{R_X\\approx \\frac{2}{3g_m}}.\n\\]\n\nFor the actual large-signal oscillating waveform, however, there is no single time-invariant small-signal resistance; it depends on the phase of oscillation and frequency.",
        "format": "markdown",
        "sha256": "89c7dfe77431acc7be39dccdce026b686ff4bbcf43d56ae628eacb96658aa272"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The static small-signal derivation is internally consistent, but it analyzes the non-oscillating DC point and misses the dominant oscillation-driven charging and discharging of the load capacitances. The expected resistance is approximately 1/(3 f₀C_L), with possible refinement for the VDD dependence of f₀.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 26845,
        "total_tokens": 29992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 26845,
        "total_tokens": 29992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "There are two different quantities that can be meant by \\(R_X\\).\n\nFor the symmetric **DC operating point**, let \\(v_s\\) be a small supply perturbation and let all three inverter-node perturbations be \\(v_o\\). Neglecting \\(r_o\\) and capacitances, one stage gives\n\n\\[\ni_{DD}=g_{mp}(v_s-v_o)=g_{mn}v_o .\n\\]\n\nThus,\n\n\\[\nG_{\\text{stage}}\n=\\frac{i_{DD}}{v_s}\n=\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}},\n\\]\n\nand the three stages in parallel give\n\n\\[\nR_X=\\frac{1}{3G_{\\text{stage}}}\n=\\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right).\n\\]\n\nThis is a **formal zero-frequency, common-mode resistance** of the symmetric DC solution. The devices are not physically diode-connected; their gate and drain small-signal voltages happen to be equal under this particular common-mode assumption.\n\nOnce the ring is actually oscillating, however, there is no fixed operating point. The node voltages are periodic and phase-shifted, the transconductances vary with time, and one transistor is often nearly off while the other is on. The supply current is mainly a sequence of capacitive charging and short-circuit-current pulses. Therefore the running oscillator does not generally present the fixed resistance above.\n\nA slow supply perturbation could be described by an effective resistance\n\n\\[\nR_{\\text{eff}}=\n\\left(\\frac{\\partial \\overline{I}_{DD}}\n{\\partial V_{DD}}\\right)^{-1},\n\\]\n\nwhere \\(\\overline{I}_{DD}\\) is the average supply current over a cycle. For example, with effective load capacitance \\(C_L\\),\n\n\\[\n\\overline{I}_{DD}\\approx\n3C_L V_{DD} f_{\\text{osc}}(V_{DD})+\\overline{I}_{\\text{sc}}+\\cdots,\n\\]\n\nso the result depends on the oscillator frequency, waveform, and short-circuit current—not directly on the quoted \\(g_m\\) expression.\n\nFor an AC perturbation, the appropriate quantity is generally a frequency-dependent, possibly complex \\(Z_{DD}(\\omega)\\), obtained from a periodic small-signal or transient perturbation analysis.\n\nSo:\n\n- **DC/start-up linearization about the symmetric equilibrium:** the quoted expression can remain the formal result, even if that equilibrium is unstable.\n- **The actual running oscillator:** there is no single constant \\(R_X\\) given by that expression. Oscillation by itself does not imply that the supply resistance becomes negative.",
        "format": "markdown",
        "sha256": "f093619b8541bd10117d0b118bdd55d0e6fcaae7db78a0b383843e9cd82fde56"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the capacitive charging current and gives its average-current dependence on frequency, but does not establish that the resulting resistance remains on the order of the MOS on-resistance or inverse transconductance. It instead leaves the key magnitude comparison unresolved.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3227,
        "output_tokens": 38911,
        "total_tokens": 42138,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38330,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3227,
        "output_tokens": 38911,
        "total_tokens": 42138,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38330,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The expression has an implicit operating-point assumption. It is the **DC common-mode incremental resistance** about the symmetric fixed point of the ring.\n\nLet \\(v_1,v_2,v_3\\) be the inverter outputs. At the symmetric DC point,\n\n\\[\nv_1=v_2=v_3=V_M .\n\\]\n\nA small DC perturbation applied to the common supply is also symmetric, so\n\n\\[\n\\tilde v_1=\\tilde v_2=\\tilde v_3.\n\\]\n\nTherefore, in the incremental circuit, the gate and drain of each NMOS have the same small-signal voltage, and likewise for each PMOS. Each inverter does look like a diode-connected NMOS and PMOS in series. Ignoring \\(r_o\\), capacitances, and body effect,\n\n\\[\nG_{X,\\text{dc}}\n=3\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)^{-1},\n\\]\n\nso\n\n\\[\nR_{X,\\text{dc}}\n=\\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right).\n\\]\n\nThe DC fixed point may be dynamically unstable, which is what allows the ring to start oscillating. That instability does not, by itself, change the formal DC incremental resistance.\n\nHowever, this is generally **not** the resistance seen by the supply while the oscillator is running. In the periodic state, the inverter input and output voltages are phase-shifted:\n\n\\[\nv_{\\text{in},i}(t)\\neq v_{\\text{out},i}(t).\n\\]\n\nThus the gates and drains are not diode-connected in the incremental sense. Devices turn on and off during the cycle, \\(g_m\\) varies with time, and the supply current includes capacitive and short-circuit current. The supply port is then a periodically time-varying load, not a single time-invariant resistor.\n\nIf a slowly varying supply voltage is of interest, one can define an effective resistance by\n\n\\[\nR_{X,\\text{eff}}\n=\n\\left(\n\\frac{d\\langle I_{DD}\\rangle}{dV_{DD}}\n\\right)^{-1},\n\\]\n\nwhere the average is taken over the periodic steady state. This depends on the oscillator frequency, waveform, capacitances, leakage, and short-circuit current. For a specified AC frequency, a periodic small-signal or PSS/PAC analysis is required.\n\nSo: **for the DC fixed-point calculation, the quoted result is unchanged; for the actual oscillating circuit, there is no generally valid single \\(R_X\\) given by that expression.**",
        "format": "markdown",
        "sha256": "d50d250a8e4a5c0909d671c55dfc7c971e1768a93772b613a61c5b6e9a6dabb0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly distinguishes the unstable DC fixed point from the periodic operating state, but stops at saying the running oscillator has no generally valid single resistance. It does not derive the capacitance-charging result or establish that the effective resistance remains on the order of the MOS on-resistance, which is the key conclusion.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 30565,
        "total_tokens": 33792,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29996,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 30565,
        "total_tokens": 33792,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29996,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The quoted result is valid only for a particular operating point: the symmetric, nonoscillating DC solution.\n\nAt that point, if all three inverter nodes have the same small-signal voltage \\(\\delta v\\), then for one inverter\n\n\\[\n\\delta i_p \\simeq g_{mp}(\\delta V_{DD}-\\delta v)\n\\]\n\nand\n\n\\[\n\\delta i_n \\simeq g_{mn}\\delta v .\n\\]\n\nSince there is no DC current into the inverter input, these currents are equal. Thus one stage has\n\n\\[\nR_{\\text{stage}}\\simeq \\frac{1}{g_{mp}}+\\frac{1}{g_{mn}},\n\\]\n\nand three identical stages in parallel give\n\n\\[\nR_{X,\\text{DC}}\\simeq\n\\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right).\n\\]\n\nThis is the resistance of the symmetric DC operating point, even though that point is unstable when the ring is capable of oscillation. If \\(r_o\\) is included, the diode-connected conductances are more accurately \\(g_m+g_{ds}\\).\n\nFor the **running oscillator**, however, this is not generally the supply impedance. During oscillation, the input and output of a given inverter are delayed and inverted waveforms:\n\n\\[\nv_{g,i}(t)=v_{i-1}(t),\\qquad v_{d,i}(t)=v_i(t),\n\\]\n\nso they are not equal. The transistors are also alternately off, conducting, or switching, and \\(g_m\\) varies with time. The supply current is a periodic waveform containing charging, discharging, and short-circuit current.\n\nTherefore the running circuit has a time-varying small-signal model, not one fixed resistance. A low-frequency effective resistance could be defined as\n\n\\[\nR_{\\text{eff}}=\n\\left(\n\\frac{d\\langle I_{DD}\\rangle}{dV_{DD}}\n\\right)^{-1},\n\\]\n\nwhere \\(\\langle I_{DD}\\rangle\\) is the average supply current. This depends on the oscillator frequency, load capacitances, waveform, and short-circuit current. For an AC supply perturbation, the proper quantity is a frequency-dependent, possibly frequency-converting impedance obtained by linearizing about the periodic steady state.\n\nSo: the expression remains the DC small-signal result, but it is not generally the resistance presented by the ring while it is actually oscillating.",
        "format": "markdown",
        "sha256": "c183c5bf85abeabfec22eb2c8d7403e5a9ba6cf05232514f30101871e72860f0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly distinguishes the DC small-signal result from the running oscillator, but misses the dominant capacitive charging mechanism and the key conclusion that the effective resistance remains on the order of the MOS on-resistance rather than becoming much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 32876,
        "total_tokens": 36103,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32334,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 32876,
        "total_tokens": 36103,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32334,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain generally **increases** as \\(W_7\\) increases.\n\n\\(M_7\\) is the clocked tail transistor. A larger width allows a larger tail current during evaluation, increasing the transconductance of the input pair \\(M_1\\)–\\(M_2\\):\n\n\\[\ng_{m1,2}\\propto \\sqrt{I_{\\text{tail}}}\n\\]\n\nThus, for a given \\(V_{in1}-V_{in2}\\), the differential voltage between \\(X\\) and \\(Y\\) builds up faster and the regenerative latch starts with a larger initial signal. The improvement eventually saturates if \\(M_1\\)–\\(M_2\\) become current-limiting or parasitic capacitances dominate.",
        "format": "markdown",
        "sha256": "b996f9511725e34932cf49da850c402f5bf7184a35ccc94ac7ba7fb589062182"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that a wider M7 increases tail current and input-pair transconductance, but reaches the opposite conclusion. The initial gain decreases because transconductance grows more slowly than the tail current.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 32282,
        "total_tokens": 37085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32114,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 32282,
        "total_tokens": 37085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32114,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_7\\) is the clocked tail device. Increasing its width lowers its on-resistance and increases the tail current. Consequently, the transconductance of the input pair \\(M_1\\)–\\(M_2\\) increases, so the initial differential voltage gain increases:\n\n\\[\nA_{v,\\text{initial}}\\approx g_{m,\\text{in}}R_{\\text{eff}}.\n\\]\n\nThus, the output differential voltage develops more rapidly and regeneration starts sooner. In practice, the improvement eventually shows diminishing returns because the larger \\(M_7\\) adds parasitic capacitance and reduces output resistance.",
        "format": "markdown",
        "sha256": "d1a872a2ef7ad4e0b4d6adb6e0c1c9822f014feff0accb1dfab981cd66cb598e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that a wider M7 increases tail current, but concludes that initial gain increases. The gain instead decreases because the input-pair transconductance grows more slowly than the tail current.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 19300,
        "total_tokens": 24103,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 19300,
        "total_tokens": 24103,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As \\(W_7\\) increases, \\(M_7\\) can sink more tail current when CK is asserted. This raises the bias current—and hence the transconductance—of the input pair \\(M_1/M_2\\). Therefore, the **magnitude of the initial differential voltage gain increases**, and regeneration begins more quickly.\n\nApproximately,\n\\[\ng_{m1,2}\\propto \\sqrt{I_{\\text{tail}}},\\qquad\nI_{\\text{tail}}\\propto W_7\n\\]\nso the gain rises roughly as \\(\\sqrt{W_7}\\) in a simple model. In practice, the improvement eventually saturates because of reduced output resistance, voltage-headroom limits, and increased parasitic capacitance.",
        "format": "markdown",
        "sha256": "e9f68d09f6b8ccc47ee26ead61f04922d95efe7cf64c8fd6fb06326c3da5e7ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that a wider M7 increases tail current and input-pair transconductance, but concludes that initial gain increases. It misses that the gain scales roughly as gm/ICM, so the increase in tail current makes the initial gain decrease.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 23989,
        "total_tokens": 28792,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 23989,
        "total_tokens": 28792,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at \\(P\\) and \\(Q\\) **reduces the initial voltage gain** and slows regeneration. The differential current from \\(M_1\\) and \\(M_2\\) produces\n\n\\[\n\\frac{d(v_P-v_Q)}{dt}\\approx \\frac{\\Delta i}{C_{P,Q}},\n\\]\n\nso a larger capacitance gives a smaller differential voltage buildup during the same time interval. Consequently, the cross-coupled latch receives a smaller initial imbalance and takes longer to resolve, although the final rail-to-rail output is ideally unchanged.",
        "format": "markdown",
        "sha256": "d78756108992110a60c96f878ff312b5a4c108ec75790bd391e9343341bab34f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance slows the transient, but wrongly concludes that the initial gain decreases. The longer amplification phase compensates for the smaller voltage slope, leaving the initial gain approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 11521,
        "total_tokens": 16324,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 11521,
        "total_tokens": 16324,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at \\(P\\) and \\(Q\\) **reduces the initial voltage gain** and slows the regeneration.\n\nFor a given differential current,\n\n\\[\n\\frac{d(v_P-v_Q)}{dt}\\propto \\frac{1}{C_{P,Q}},\n\\]\n\nso larger capacitance produces a smaller differential voltage during the initial sensing interval. The latch may still eventually regenerate to full logic levels, but it takes longer and has a lower early-time gain.",
        "format": "markdown",
        "sha256": "bc0d058a1fbc8850d0b6f149e384683c14433b1636efd51a60f8faa97de66f7d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance slows the transient, but it incorrectly concludes that the initial gain decreases. The longer amplification phase compensates for the smaller differential-voltage slope, leaving the initial gain approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 5283,
        "total_tokens": 10086,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 5283,
        "total_tokens": 10086,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at \\(P\\) and \\(Q\\) **reduces the initial voltage gain** and slows the regeneration.\n\nDuring evaluation, the input pair produces a differential current that charges or discharges these nodes:\n\n\\[\n\\frac{d(v_P-v_Q)}{dt}\\approx\n\\frac{g_{m,\\text{in}}}{C_{P,Q}}(v_{in1}-v_{in2}).\n\\]\n\nThus, for the same input difference and evaluation time, larger \\(C_P\\) and \\(C_Q\\) produce a smaller initial differential voltage and delay the latch regeneration. The eventual rail-to-rail gain is largely unchanged if sufficient regeneration time is available.",
        "format": "markdown",
        "sha256": "522b33d287565a183395b98b87b3f4f321f9c4f5a3c4e9b16ec7a45effef724c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gets the central result wrong: the initial gain remains approximately unchanged. It correctly notes that larger capacitance slows the node-voltage transient and delays regeneration, but misses that the longer amplification interval cancels the reduced slope.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 8954,
        "total_tokens": 13757,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 8954,
        "total_tokens": 13757,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M5 and M6 are the cross-coupled PMOS regeneration devices. Increasing their widths:\n\n- increases \\(g_m\\) and pull-up current, strengthening positive feedback and tending to speed up regeneration;\n- but also increases \\(C_{gs}\\), \\(C_{gd}\\), and junction capacitance at \\(X\\) and \\(Y\\), which slows the initial voltage development.\n\nThus, a **moderate increase generally improves regeneration speed**, but excessive widening can make the overall comparator slower. The delay is roughly governed by\n\n\\[\nt_{\\text{reg}} \\propto \\frac{C_{\\text{node}}}{g_{m,n}+g_{m,p}},\n\\]\n\nso an optimum width exists rather than “larger is always faster.”",
        "format": "markdown",
        "sha256": "f4ab0a4d16625e4ce557e18e333e8d444261a3b58d545fccec75330bddb44d04"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M5/M6 as cross-coupled PMOS regeneration devices, explains that stronger regeneration initially improves speed, and notes that added capacitance eventually creates an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 15181,
        "total_tokens": 19983,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 15181,
        "total_tokens": 19983,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M5 and M6 are the cross-coupled PMOS regeneration devices, so increasing their widths has two opposing effects:\n\n- **Improves regeneration:** higher \\(g_m\\) and lower \\(R_{\\text{on}}\\) provide stronger positive feedback.\n- **Loads \\(X\\) and \\(Y\\):** larger \\(C_{gd}\\), \\(C_{db}\\), and gate overlap capacitances increase the node capacitance. Since M5/M6 are initially off, this extra capacitance can slow the initial differential development.\n\nThus, a modest increase may improve the regeneration speed if the devices are too small, but excessive widening degrades the total decision speed. There is an optimum width; making M5/M6 larger is not automatically faster.",
        "format": "markdown",
        "sha256": "938bd414fad9288be07085e9a46a21cc77186b6ca708f34f7369e9370fba7789"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M5/M6 as cross-coupled PMOS regeneration devices, states that widening can initially improve speed, and notes the capacitance-driven limit and optimum width. The comment that added capacitance can slow initial development does not overturn the correct overall trend.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 19841,
        "total_tokens": 24643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 19841,
        "total_tokens": 24643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M5 and M6 are the cross-coupled PMOS regeneration devices. Increasing their widths has two opposing effects:\n\n- **Improves regeneration:** larger \\(W\\) gives higher \\(g_m\\) and pull-up current, strengthening positive feedback.\n- **Adds loading:** their gate and diffusion capacitances at \\(X\\) and \\(Y\\) increase, slowing the initial voltage separation and increasing reset energy.\n\nThus, a **moderate increase usually improves the regeneration speed**, but oversizing them can make the comparator slower. The speed is generally optimized at an intermediate \\(W_{5,6}\\), rather than increasing monotonically with width.",
        "format": "markdown",
        "sha256": "0cc46b237d916baed479ed2b70d45a8cbc9b23a2453a8750d9bef392fd3bd2e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M5/M6 as cross-coupled PMOS regeneration devices, explains the initial speed gain from stronger regeneration and the eventual capacitance-limited optimum.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 6351,
        "total_tokens": 11153,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 6351,
        "total_tokens": 11153,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "There is a tradeoff; increasing the widths does not always make the circuit faster.\n\nDuring the active clock phase, the clocked transistors are in series with the \\(M_1\\) devices, so increasing \\(W_{\\text{clk}}\\) reduces their \\(R_{\\text{on}}\\) and initially improves the rise/fall time. However, it also increases:\n\n- the diffusion and overlap capacitance at nodes \\(X\\) and \\(Y\\), and\n- the capacitive load on \\(CK\\) and \\(\\overline{CK}\\).\n\nA rough delay dependence is\n\n\\[\nt_p \\propto \\left(R_{M_1}+\\frac{R_{\\text{clk}}}{W_{\\text{clk}}}\\right)\n\\left(C_{\\text{load}}+C_{\\text{diff}}W_{\\text{clk}}\\right).\n\\]\n\nThus, there is an optimum clock-transistor width. If the clocked devices are undersized, widening them improves speed; if they are already sufficiently large, further widening increases capacitance and degrades speed. With an ideal clock and neglected parasitics, one would see the initial improvement, but in a real circuit excessive sizing can slow the overall operation.",
        "format": "markdown",
        "sha256": "a9f979ea37ee6b151d6e9d9e0acbe918a3e08e0f9e20da3f424596d2f490df5c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that widening initially improves speed by lowering clocked-device on-resistance, while added capacitance eventually limits or reverses the benefit, giving an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 32890,
        "total_tokens": 34953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32632,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 32890,
        "total_tokens": 34953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32632,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It is **not monotonic**.\n\nIncreasing the widths \\(W_C\\) of the clocked transistors:\n\n- decreases their \\(R_{\\text{on}}\\), which tends to make \\(X\\) and \\(Y\\) switch faster;\n- but increases their drain/source diffusion capacitance at \\(X\\) and \\(Y\\), and increases the load on \\(CK\\) and \\(\\overline{CK}\\).\n\nA rough delay expression is\n\n\\[\nt_p \\approx \\left(R_{\\text{logic}}+\\frac{k}{W_C}\\right)\n\\left(C_{\\text{load}}+cW_C\\right).\n\\]\n\nThus, if the clocked devices are undersized, making them wider improves speed. Beyond an optimum width, the added capacitance and clock loading dominate and the ring-oscillator frequency decreases. Therefore, simply making the clocked transistors large can **degrade** speed; they should be sized for an optimum, not maximized.",
        "format": "markdown",
        "sha256": "d54d911feeec5bf8f3f6065799f7fe42290d4be3fa16439c5fbaf0fbabd9a900"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening the clocked devices initially improves speed by lowering their on-resistance, while added node and clock capacitance eventually limits or reverses the benefit, giving an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 16781,
        "total_tokens": 18844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 16781,
        "total_tokens": 18844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "There is an optimum width; increasing them does **not** always improve the speed.\n\nDuring the active clock phase, each clocked inverter has the clocked transistor in series with the logic transistor \\(M_1\\). Increasing its width reduces \\(R_{\\text{ON}}\\), so the circuit initially switches faster. However, it also increases:\n\n- the diffusion capacitance at nodes \\(X\\) and \\(Y\\),\n- the capacitance driven by \\(CK\\) and \\(\\overline{CK}\\),\n- and, with \\(M_1\\) unchanged, the resistance soon becomes limited by \\(M_1\\).\n\nApproximately,\n\\[\nt_p \\sim (R_{M_1}+R_{\\text{clk}})(C_{\\text{load}}+C_{\\text{diff,clk}}),\n\\]\nwhere \\(R_{\\text{clk}}\\) decreases with width but \\(C_{\\text{diff,clk}}\\) increases with width.\n\nThus, widening undersized clocked transistors improves speed, but over-sizing them degrades speed. In practice they are made only large enough that their resistance is not the dominant part of the delay; beyond that, the added capacitance usually slows the circuit.",
        "format": "markdown",
        "sha256": "78e5061457595cbd05d1248e569154a1523b46339e5541ef09193c742bf41655"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by reducing clocked-transistor on-resistance, while added node capacitance eventually limits or reverses the benefit, yielding an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 19417,
        "total_tokens": 21480,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 19417,
        "total_tokens": 21480,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—**nominally, nodes \\(X\\) and \\(Y\\) provide quadrature outputs**, but at half the input-clock frequency.\n\nAssuming complementary, roughly 50%-duty-cycle clocks:\n\n- When \\(CK=1\\), the left clocked inverter is enabled. Since \\(Z=\\overline{Y}\\),\n  \\[\n  X=\\overline{Z}=Y.\n  \\]\n- When \\(CK=0\\), the right clocked inverter is enabled, giving\n  \\[\n  Y=\\overline{X}.\n  \\]\n\nThus \\(X\\) and \\(Y\\) toggle on alternate clock edges. Their frequency is\n\n\\[\nf_{\\text{out}}=\\frac{f_{CK}}{2},\n\\]\n\nand their transition separation is \\(T_{CK}/2\\). Since the output period is \\(2T_{CK}\\),\n\n\\[\n\\frac{T_{CK}/2}{2T_{CK}}=\\frac14,\n\\]\n\ncorresponding to a \\(90^\\circ\\) phase shift. The state sequence is, for example,\n\n\\[\n00\\rightarrow 01\\rightarrow 11\\rightarrow 10\\rightarrow 00.\n\\]\n\nSo \\(X\\) and \\(Y\\) are a digital quadrature pair. However, exact \\(90^\\circ\\) phase requires a 50%-duty-cycle clock, matched delays, and adequate settling. Also, \\(Y\\) and \\(Z\\) themselves are complementary (\\(180^\\circ\\) apart), not quadrature.",
        "format": "markdown",
        "sha256": "d6a452e6c7c202990145a0adefd940b271265e157456374546a00bfa52cd59e1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature at X and Y and gives the half-period/90° reasoning. It mentions delay matching as an exactness condition, but omits the specific Inv3 skew and unequal latch loading that explain the nonideal phase relationships.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 13791,
        "total_tokens": 15839,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 13791,
        "total_tokens": 15839,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—not inherently.\n\nWhen \\(CK=1\\), the two clocked CMOS stages and \\(Inv_3\\) form a three-inverter ring:\n\n\\[\nZ \\rightarrow X \\rightarrow Y \\rightarrow Z\n\\]\n\nFor approximately equal stage delays, the oscillator nodes \\(X\\), \\(Y\\), and \\(Z\\) are separated by roughly\n\n\\[\n\\frac{360^\\circ}{3}=120^\\circ,\n\\]\n\nnot \\(90^\\circ\\). The complementary signals \\(CK\\) and \\(\\overline{CK}\\) are also \\(180^\\circ\\) apart and merely enable or disable the clocked stages; they do not create quadrature phases.\n\nThus, the circuit can provide three phase-shifted ring-oscillator nodes, but it does not provide guaranteed quadrature \\(I/Q\\) outputs. A dedicated four-phase/quadrature oscillator or an additional phase-shifting/dividing circuit would be required.",
        "format": "markdown",
        "sha256": "53296780bcb9a2ea7a6a1decd2ea845b7c0fccb0bd6ac8363aa67226e50488cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the clocked C2MOS divide-by-two as a three-inverter ring oscillator, so its 120° analysis misses the nominal quadrature produced by the two latches switching on opposite clock edges.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 11075,
        "total_tokens": 13123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 11075,
        "total_tokens": 13123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—**nominally, \\(X\\) and \\(Y\\) form a quadrature pair**, assuming the two clocked inverters are driven by complementary clock phases as shown.\n\nLet \\(T_{CK}\\) be the input-clock period:\n\n- During one clock phase, the left clocked inverter is enabled, so  \n  \\[\n  X=\\overline{Z}=Y\n  \\]\n  because \\(Z=\\overline{Y}\\) through \\(\\mathrm{Inv}_3\\).\n- During the opposite phase, the right clocked inverter is enabled, so  \n  \\[\n  Y=\\overline{X}.\n  \\]\n\nThus, \\(X\\) changes on one clock edge and \\(Y\\) changes on the opposite edge. Each output has frequency \\(f_{CK}/2\\), so its period is \\(2T_{CK}\\). Their transitions are separated by approximately \\(T_{CK}/2\\), which corresponds to\n\n\\[\n\\frac{T_{CK}/2}{2T_{CK}}\\times360^\\circ=90^\\circ .\n\\]\n\nTherefore, \\(X\\) and \\(Y\\) are nominally \\(90^\\circ\\) apart. \\(Z\\) is the complement of \\(Y\\), so \\(Y\\) and \\(Z\\) are \\(180^\\circ\\) apart; \\(X\\) and \\(Z\\) provide the opposite quadrature relationship.\n\nIn practice, the phase will not be exactly \\(90^\\circ\\) because of clock-duty-cycle errors, propagation-delay mismatch, unequal loading, and overlap between \\(CK\\) and \\(\\overline{CK}\\). If both clocked inverters were enabled by the same clock phase, however, it would instead be a gated three-inverter ring and would not inherently provide quadrature outputs.",
        "format": "markdown",
        "sha256": "e068b10cb81735ecaeea47249182d1e786823d67f79b09ce7a00fd004de1de1f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature relationship and notes unequal loading. However, it does not specifically explain that Inv3’s delay skews Z; generic propagation-delay mismatch does not establish that required caveat.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 27313,
        "total_tokens": 29361,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26934,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 27313,
        "total_tokens": 29361,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26934,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "There is a tradeoff; it is not automatically better to make them wider.\n\nDuring the active half-cycle, each clocked inverter has a clock transistor in series with its pull-up or pull-down device. Increasing its width reduces its \\(R_{\\text{on}}\\), so with an ideal, low-impedance clock,\n\n\\[\nt_{\\text{delay}}\\approx 0.69\\left(R_{\\text{logic}}+R_{\\text{clock}}\\right)C_{\\text{load}}\n\\]\n\nis reduced and the circuit becomes faster—initially.\n\nHowever, wider clocked transistors also increase:\n\n- the capacitance seen by \\(CK\\) and \\(\\overline{CK}\\),\n- diffusion capacitance on the internal stack nodes,\n- clock feedthrough and charge injection.\n\nIf the clock driver has finite resistance, the increased clock load can slow the clock edges and eventually dominate. Thus, in practice, there is an optimum width: moderate widening generally improves speed, while excessive widening can degrade it. Under the ideal-clock assumption, the expected answer is “speed improves, with diminishing returns.”",
        "format": "markdown",
        "sha256": "6f506955a62e72e6487e9c792bdb2b91fbb875a51caa832ce66720a8141c78f8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly says widening reduces series on-resistance and initially improves speed. It omits the key charge-sharing effect that degrades the swing, so it does not earn full credit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 16804,
        "total_tokens": 18934,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 16804,
        "total_tokens": 18934,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "There is no unconditional “wider is faster” result.\n\nIncreasing the clocked-transistor width:\n\n- decreases their \\(R_{\\text{on}}\\), reducing the series resistance in the clocked-CMOS path and initially improving the transition speed;\n- increases their clock-gate capacitance and diffusion capacitance, loading \\(CK/\\overline{CK}\\) and the internal nodes.\n\nThus, with an ideal, zero-impedance clock, widening undersized clocked devices improves speed until their resistance is no longer limiting. In a real circuit, further widening can slow the clock and increase clock-to-\\(Q\\) delay. The practical design therefore has an optimum width; oversized clocked transistors can degrade the overall speed.",
        "format": "markdown",
        "sha256": "b12fd3e489d9b1d88635982188e77e771ff1089f9a8c8937f8ae5c3dde415ad1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly says wider clocked devices initially improve speed by lowering their on-resistance, but omits the key charge-sharing effect that degrades swing and limits the benefit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 26569,
        "total_tokens": 28699,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 26569,
        "total_tokens": 28699,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "There is a tradeoff; increasing the width does **not** always improve the speed.\n\nFor an active clock phase, the clocked transistor is in series with the pull-up or pull-down transistor. Increasing \\(W\\) reduces its on-resistance,\n\n\\[\nR_{\\text{clock}}\\propto \\frac{1}{W},\n\\]\n\nso the internal node can initially switch faster. However, larger clocked transistors also produce:\n\n- larger gate capacitance on \\(CK\\) and \\(\\overline{CK}\\), slowing the clock edges;\n- larger diffusion and overlap capacitances at the internal nodes;\n- little further resistance improvement once the unclocked logic transistor becomes the dominant resistance.\n\nThus, for an ideal clock and undersized clock transistors, widening them initially improves the clock-to-output delay. Beyond an optimum size, the added capacitance dominates and the overall speed degrades. In practice, size them only large enough that they are not the limiting series resistance; do not make them arbitrarily wide.",
        "format": "markdown",
        "sha256": "974796ba9378d47e55efa588a9457ab1aaf7d62fade968572390b6b22fc88c71"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly says widening initially improves speed by reducing series on-resistance, but omits charge sharing, the key limitation identified in the golden solution. Its emphasis on added capacitance causing eventual degradation is not the specified mechanism.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 14197,
        "total_tokens": 16327,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 14197,
        "total_tokens": 16327,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume each switch conducts when its labeled clock is high. Let\n\n- \\(x\\): input of \\(\\mathrm{Inv}_1\\)\n- \\(y\\): output of \\(\\mathrm{Inv}_1\\)\n- \\(z\\): input of \\(\\mathrm{Inv}_2\\)\n- \\(Q\\): output of \\(\\mathrm{Inv}_3\\), which is fed back to the left\n\nSince \\(\\mathrm{Inv}_2\\) and \\(\\mathrm{Inv}_3\\) are in series,\n\n\\[\nQ=\\overline{\\overline{z}}=z\n\\]\n\nand\n\n\\[\ny=\\overline{x}.\n\\]\n\n### Clock phases\n\n| \\(CK\\) | Left switch | Middle switch | Operation |\n|---|---|---|---|\n| 0 | Open | Closed | \\(x\\) is isolated and stores its charge; \\(y\\) propagates through \\(\\mathrm{Inv}_2,\\mathrm{Inv}_3\\) |\n| 1 | Closed | Open | \\(Q\\) is connected to \\(x\\); \\(z\\) is isolated and stores its charge |\n\nFor \\(CK=0\\),\n\n\\[\nz=y=\\overline{x}, \\qquad Q=z=\\overline{x}.\n\\]\n\nFor \\(CK=1\\),\n\n\\[\nx=Q,\n\\]\n\nwhile the middle switch is open, so the stored value at \\(z\\) holds \\(Q\\).\n\nSuppose the output is \\(Q\\) during a high-clock phase and has value \\(Q_0\\). When \\(CK\\) goes low, \\(x\\) remains \\(Q_0\\), so the first inverter produces \\(\\overline{Q_0}\\), which propagates through the remaining two inverters and makes\n\n\\[\nQ=\\overline{Q_0}.\n\\]\n\nWhen \\(CK\\) goes high again, this new \\(Q\\) value is fed back to \\(x\\), but the output \\(Q\\) itself remains unchanged until the next low phase.\n\nThus, the rightmost output toggles once per clock cycle:\n\n\\[\nQ_{n+1}=\\overline{Q_n}.\n\\]\n\nTherefore, the circuit is a **dynamic T flip-flop** with \\(T=1\\), or equivalently a **divide-by-two frequency divider**:\n\n\\[\nf_Q=\\frac{f_{CK}}{2}.\n\\]\n\nWith the assumed switch polarity, \\(Q\\) changes on the falling edge of \\(CK\\); the internal node at the input of \\(\\mathrm{Inv}_1\\) changes on the rising edge.\n\nThe circuit is dynamic: it relies on capacitance at the isolated nodes to retain the logic state. The two clock phases should be nonoverlapping; if both switches conduct simultaneously, all three inverters form an odd-inverter ring, which can oscillate rather than store a valid logic state.",
        "format": "markdown",
        "sha256": "e781e5c047e2baf5c30310bb0c6791122615971f553230bda6338288732bde45"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic divide-by-two, explains that feedback makes the output toggle once per clock cycle, and gives the resulting half-rate output. The additional timing and storage discussion is consistent with the intended operation.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 14005,
        "total_tokens": 15295,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13396,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 14005,
        "total_tokens": 15295,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13396,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume the switch labeled \\(CK\\) is ON when \\(CK=1\\), and the switch labeled \\(\\overline{CK}\\) is ON when \\(CK=0\\).\n\nLet \\(q\\) be the input of \\(\\mathrm{Inv}_1\\), and let \\(Y\\) be the output of \\(\\mathrm{Inv}_3\\), which is also fed back.\n\n### \\(CK=1\\)\n\n- The \\(CK\\)-controlled switch closes.\n- The \\(\\overline{CK}\\)-controlled switch opens.\n- Therefore, \\(q\\) is connected to \\(Y\\), so \\(q\\) is charged to the present value of \\(Y\\).\n- The input of \\(\\mathrm{Inv}_2\\) is isolated, so the last two inverters hold their previous state.\n\nThus,\n\n\\[\nq \\leftarrow Y\n\\]\n\n### \\(CK=0\\)\n\n- The feedback switch opens.\n- The switch between \\(\\mathrm{Inv}_1\\) and \\(\\mathrm{Inv}_2\\) closes.\n- The stored value \\(q\\) propagates through all three inverters.\n\nSince there are three inversions,\n\n\\[\nY_{\\text{new}}=\\overline{q}.\n\\]\n\nIf \\(Y_n\\) is the old output, the high-clock phase stores \\(q=Y_n\\), and the following low-clock phase produces\n\n\\[\nY_{n+1}=\\overline{Y_n}.\n\\]\n\nTherefore the output sequence is\n\n\\[\n0\\rightarrow1\\rightarrow0\\rightarrow1\\rightarrow\\cdots\n\\]\n\nor its complement, depending on the initial state.\n\nHence, the arrangement is a **dynamic toggle flip-flop**, or a **divide-by-two frequency divider**:\n\n\\[\nf_{\\text{out}}=\\frac{f_{CK}}{2}.\n\\]\n\nWith the assumed switch polarity, the output at the third inverter changes on the falling edge of \\(CK\\). There is no reset shown, so the initial output phase is indeterminate. The two clock phases should also be nonoverlapping; if both switches close simultaneously, the three inverters form an odd-inverter ring that can race or oscillate.",
        "format": "markdown",
        "sha256": "23f3c5dc07489073fe1d6c2ec4ddbe80eeef6aa0462df88ced285995b0c9fae8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a dynamic toggle flip-flop/divide-by-two circuit, with output frequency half the clock frequency. The additional phase and feedback explanation is consistent with the intended operation.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 16001,
        "total_tokens": 17291,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 16001,
        "total_tokens": 17291,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume each switch closes when its control signal is logic 1. Let\n\n- \\(X\\): input of the first inverter,\n- \\(Y\\): output of \\(Inv_1\\),\n- \\(Q\\): output of the rightmost inverter, which is fed back to the left.\n\nSince the last two inverters are in series, their net logic function is noninverting:\n\n\\[\nY=\\overline{X}, \\qquad Q=Z\n\\]\n\nwhere \\(Z\\) is the input of the second inverter.\n\n### \\(CK=1\\)\n\nThe \\(CK\\)-controlled switch is closed and the \\(\\overline{CK}\\)-controlled switch is open.\n\n- The feedback connects \\(Q\\) to \\(X\\), so \\(X=Q\\).\n- The right-hand two-inverter section is isolated from \\(Inv_1\\), so \\(Q\\) holds its previous value dynamically.\n- \\(Inv_1\\) produces \\(\\overline Q\\), but this value cannot yet reach the output section.\n\n### \\(CK=0\\)\n\nThe \\(CK\\)-controlled switch is open and the \\(\\overline{CK}\\)-controlled switch is closed.\n\n- \\(X\\) is isolated and holds its previous value.\n- \\(Y=\\overline X\\) is transferred through the two inverters.\n- Since two inverters have unity logic polarity,\n\n\\[\nQ=Y=\\overline X.\n\\]\n\nImmediately before \\(CK\\) falls, \\(X\\) was connected to \\(Q\\), so \\(X=Q_{\\text{old}}\\). Therefore, after the low phase,\n\n\\[\nQ_{\\text{new}}=\\overline{Q_{\\text{old}}}.\n\\]\n\nThus the circuit toggles its output on every falling edge of \\(CK\\):\n\n\\[\nQ_{n+1}=\\overline{Q_n}.\n\\]\n\nIt is therefore equivalent to a negative-edge-triggered \\(T\\) flip-flop with \\(T=1\\), or a divide-by-two frequency divider:\n\n\\[\nf_Q=\\frac{f_{CK}}{2}.\n\\]\n\nThe first-node signal \\(X\\), or the output of \\(Inv_1\\), toggles on the opposite clock edge.\n\n### Important practical points\n\n- The circuit is **not a free-running ring oscillator** during normal operation, because one of the two switches is always open.\n- The open-switch nodes are dynamic storage nodes, so the circuit requires capacitance, a keeper, or periodic clocking; it also needs a reset if a defined initial state is required.\n- The clock phases should be nonoverlapping. If both switches close simultaneously, all three inverters form an odd-inverter ring:\n\n\\[\nX=Q,\\qquad Q=\\overline X,\n\\]\n\nwhich has no stable Boolean solution and can produce oscillation or a race.",
        "format": "markdown",
        "sha256": "8cd1408139fba251600acf949cfa635c11c37008854a607b9c943ff3e32f95b1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a dynamic divide-by-two and explains that its output toggles to give half the clock frequency. The detailed phase and inverter-path analysis is secondary under the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 17169,
        "total_tokens": 18459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 17169,
        "total_tokens": 18459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming each switch closes when its labeled signal is high, the red inverter is part of the clocked feedback path.\n\n- When \\(CK=0\\), the \\(CK\\)-controlled switch is open and the \\(\\overline{CK}\\)-controlled switch is closed. The active loop is therefore\n\n\\[\n\\text{Inv}_1 \\rightarrow \\text{right-hand Inv}_2 \\rightarrow \\text{right-hand Inv}_3\n\\]\n\nwhich is a three-inverter ring oscillator. The red inverter is essential here: without it, the node between the switches would be floating and the ring would not oscillate.\n\n- When \\(CK=1\\), the loop is broken. The red inverter and the left black inverter drive the same node in parallel and both ideally produce the same logic value. This can make that node stronger and faster, but it also increases capacitance and power consumption.\n\nThe oscillation frequency is approximately\n\n\\[\nf_{\\mathrm{osc}}\\approx\n\\frac{1}{2(t_{p1}+t_{p2}+t_{p3}+t_{p,\\mathrm{switch}})} ,\n\\]\n\nso the red inverter’s propagation delay, sizing, and loading directly affect frequency and edge speed. A stronger, faster inverter may increase frequency, but its added input/output capacitance can offset that improvement and increase dynamic power.\n\nOne important practical caveat: opening the switch at the **input** of the left black inverter does not turn that inverter’s output off. Its output remains connected to the red inverter output and may fight it when the feedback signal changes. This can cause crowbar current, slower transitions, reduced voltage swing, or even prevent oscillation. A real implementation should use a tri-state/clock-gated inverter or isolate the inverter output as well.",
        "format": "markdown",
        "sha256": "774ea0da261344583d6446699f461feb411ba0221a87974e04e278f1b15e24a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as part of a clocked ring oscillator and misses the key feedforward bypass that improves divider speed, as well as its low-frequency drawback of raising the minimum usable clock frequency. Its observation that the red inverter can fight Inv1 is relevant, but does not correct the central topology and performance errors.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 11247,
        "total_tokens": 12406,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 11247,
        "total_tokens": 12406,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is an **always-connected feedback/bypass inverter**. It is effectively in parallel with the \\(CK\\)-controlled inverter; it is not a fourth inverter in series.\n\n- When the \\(\\overline{CK}\\) switch is closed, the red inverter completes the path  \n  \\[\n  \\text{feedback} \\rightarrow Inv_1 \\rightarrow Inv_2 \\rightarrow Inv_3\n  \\rightarrow \\text{feedback},\n  \\]\n  forming a three-inverter ring. Thus, it prevents the intermediate node from floating and allows the circuit to propagate or oscillate during that clock phase. Its propagation delay contributes to the oscillation period:\n  \\[\n  T \\approx 2(t_{p,Inv_1}+t_{p,Inv_2}+t_{p,Inv_3}+t_{p,\\text{switch}}).\n  \\]\n\n- When the \\(CK\\)-controlled path is enabled, the red inverter drives the same node as the lower inverter. This can provide stronger drive and faster edges, but does not change the logic polarity.\n\nThe trade-offs are increased input capacitance, area, dynamic power, and possible contention if the two inverter outputs are tied without proper tri-state control. It also partially bypasses the clock gating, so unwanted transitions or oscillation may occur during a supposedly inactive phase. Therefore, it can improve speed and prevent a floating node, but its exact effect depends on sizing and whether it is intended as a strong parallel driver or a weak feedback keeper.",
        "format": "markdown",
        "sha256": "5c244a1d78fa098161789c5dd5d82792722b2aaf348874a608e3a5c03646879a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that the always-connected branch can bypass clock gating, improve speed, and permit oscillation. But it misses the key low-frequency drawback: the unclocked branch can overpower the main path and raise the minimum usable clock frequency. It also mischaracterizes the branch as preventing a floating node and gives an inaccurate ring-path description.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 12228,
        "total_tokens": 13387,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 12228,
        "total_tokens": 13387,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is an **always-connected feedback inverter**. It bypasses the \\(CK\\)-controlled first inverter and drives the node before the \\(\\overline{CK}\\) switch.\n\n- When \\(CK=0\\) and \\(\\overline{CK}=1\\), the active loop is approximately  \n  \\[\n  X \\rightarrow \\text{red Inv}_1 \\rightarrow \\text{Inv}_2\n  \\rightarrow \\text{Inv}_3 \\rightarrow X .\n  \\]\n  Thus, it supplies the missing inversion and allows the ring to oscillate. The approximate oscillation frequency is\n  \\[\n  f \\approx \\frac{1}{2(t_{\\text{red}}+t_{\\text{switch}}+t_2+t_3)}.\n  \\]\n\n- When \\(CK=1\\), the \\(\\overline{CK}\\) switch opens and the loop is stopped. The red inverter and the first black inverter then drive the same node in parallel. Ideally they produce the same logic value, giving a stronger drive and sharper transition.\n\nThe performance tradeoff is:\n\n- **Benefits:** enables the feedback loop during one clock phase, prevents the intermediate node from floating, and can improve drive strength.\n- **Costs:** adds propagation delay, input/output capacitance, area, and dynamic power, generally reducing the maximum oscillation frequency unless it is carefully sized.\n- **Caution:** because the two inverter outputs are tied together, the black inverter’s input may float when its \\(CK\\) switch is open. It can then fight the red inverter, causing extra current, slower transitions, glitches, or jitter. A tri-state/output-isolated implementation is safer.\n\nSo, the red inverter is functionally important for phase-controlled oscillation, but it is not automatically a speed improvement; its net effect depends on sizing and how the switches isolate the inactive inverter.",
        "format": "markdown",
        "sha256": "898b64b9b49688c304c888fdc323086e3c6112b536216c8b95f75e59d41a3fa6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes a bypass and a three-inversion loop, but miscasts the branch as a phase-controlled oscillator and says it may reduce maximum speed. The key effect is that the feedforward path improves high-speed operation, while its unclocked loop can corrupt division at low clock rates and raise the minimum usable frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 10749,
        "total_tokens": 11908,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 10749,
        "total_tokens": 11908,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The red inverter is not cross-coupled with `Inv1`.\n\nLet:\n\n- \\(X\\) be the feedback node at the output of the rightmost inverter.\n- \\(Y\\) be the common node at the output of `Inv1`.\n\nThe red inverter is connected as\n\n\\[\nX \\longrightarrow \\text{red inverter} \\longrightarrow Y\n\\]\n\nwhile `Inv1` is connected as\n\n\\[\nX \\longrightarrow \\text{CK switch} \\longrightarrow \\text{Inv1} \\longrightarrow Y.\n\\]\n\nThus, when the `CK` switch is on, the two inverters are simply parallel drivers of \\(Y\\), with the same logical input. That is not a cross-coupled latch; their outputs are tied together.\n\nWhen the \\(\\overline{CK}\\) switch is on, the red inverter provides the path\n\n\\[\nX \\rightarrow \\text{red inverter} \\rightarrow \\text{Inv2}\n\\rightarrow \\text{Inv3} \\rightarrow X.\n\\]\n\nThis is a three-inverter feedback loop. It has negative feedback:\n\n\\[\nY=\\overline{X}, \\qquad X=Y,\n\\]\n\nso a static logic solution would require \\(Y=\\overline{Y}\\). With propagation delay, this is a ring-oscillator/toggle path, not a two-state latch.\n\nTherefore, the red inverter’s actual role is to provide an alternate feedback path, effectively bypassing `Inv1` during one clock phase and completing the clock-controlled inverter ring. It may be made weak in a real implementation and provide some regeneration of the common node, but it is not the claimed keeper/latch.\n\nIt also does not remove the leakage-related minimum clock frequency. When one of the clock switches is open, the input of the following inverter is still a floating dynamic node, and the red inverter cannot restore its charge across the open switch. A true staticizer would require properly connected positive feedback around the storage node(s), not the topology shown.",
        "format": "markdown",
        "sha256": "738b054e7ae6e1f0e2bfbdc1faa82f2daf91fb348736a23435944e321266afa1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly rejects the keeper interpretation and recognizes the inverter-ring path and bypass, but mischaracterizes the red inverter as an alternate feedback path. It misses its feedforward pre-drive role and the key tradeoff: faster high-speed operation but low-frequency overpowering that raises the minimum usable clock rate. Its leakage/open-node explanation is not the dominant mechanism.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 35644,
        "total_tokens": 36848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35222,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 35644,
        "total_tokens": 36848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35222,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The red inverter is not cross-coupled with `Inv1` in the latch sense.\n\nLet:\n\n- \\(Q\\) be the node at the output of the rightmost inverter, which feeds back to the left.\n- \\(X\\) be the node at the output of `Inv1`, also driven by the red inverter.\n\nThe connections are effectively:\n\n\\[\nQ \\xrightarrow{\\text{red inverter}} X\n\\]\n\nand, when the `CK` switch is closed,\n\n\\[\nQ \\xrightarrow{\\text{switch}} \\text{Inv1} \\rightarrow X.\n\\]\n\nThus, during the `CK` phase, the red inverter is simply a second inverter driving the same node as `Inv1`; it is not a cross-coupled latch.\n\nMore importantly, during the \\(\\overline{CK}\\) phase, the `CK` switch is open and the \\(\\overline{CK}\\) switch is closed. The red inverter then forms the loop\n\n\\[\nX \\rightarrow \\text{Inv2} \\rightarrow \\text{Inv3} \\rightarrow Q\n\\rightarrow \\text{red inverter} \\rightarrow X.\n\\]\n\n`Inv2` and `Inv3` together are non-inverting, so ideally \\(Q=X\\). The red inverter requires \\(X=\\overline{Q}\\). Hence the loop requires\n\n\\[\nX=\\overline{X},\n\\]\n\nwhich has no stable logic solution. It is a three-inverter ring, so in a real circuit it will tend to oscillate or produce contention, depending on device strengths and delays.\n\nA genuine keeper would provide weak **positive feedback** to the dynamic node, with the correct polarity, and would normally be connected so that it reinforces the stored value. The red inverter does not drive either of the isolated dynamic input nodes, so it does not remove the leakage-related minimum clock frequency.\n\nTherefore, its actual topological role is to provide an inverting feedback path that enables a gated ring oscillator. If the circuit was intended to be a dynamic divider or latch, the red inverter is incorrectly connected—or is an unwanted extra feedback path—not a keeper.",
        "format": "markdown",
        "sha256": "89130c0d2f07da0bc0c3ccc44aaa284941361e83652eb404cb0451596468c094"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the possible three-inversion ring during the CKbar phase. However, it misses the central role of the red inverter as an unclocked feedforward branch that bypasses the latch path, and omits the high-speed benefit and low-frequency failure tradeoff; its claim that the branch is simply an unwanted feedback path gives the wrong design interpretation.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 25309,
        "total_tokens": 26513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24862,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 25309,
        "total_tokens": 26513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24862,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—not as stated. The red inverter is not cross-coupled with `Inv1`.\n\nLet\n\n- \\(x\\) be the node at the output of the rightmost inverter, the input of the red inverter, and the left side of the `CK` switch.\n- \\(y\\) be the node at the output of `Inv1`, the output of the red inverter, and the left side of the \\(\\overline{CK}\\) switch.\n\nThe red inverter implements\n\n\\[\ny=\\overline{x}.\n\\]\n\nWhen the `CK` switch is closed, `Inv1` also has \\(x\\) as its input and drives \\(y\\). Thus, the red inverter and `Inv1` are simply two parallel inverters with the same input and output. That is not a cross-coupled latch.\n\nWhen the `CK` switch is open and the \\(\\overline{CK}\\) switch is closed, the active feedback path is\n\n\\[\nx \\longrightarrow \\text{red inverter} \\longrightarrow y\n\\longrightarrow Inv2 \\longrightarrow Inv3 \\longrightarrow x.\n\\]\n\nThis is a three-inverter ring. The two black inverters together are non-inverting, while the red inverter adds one inversion, so the loop has negative feedback and, because of propagation delay, oscillates. The red inverter therefore acts as the always-enabled substitute for `Inv1` and completes the ring when `Inv1` is disconnected by the clock.\n\nIt may have a keeper-like effect in the limited sense that it prevents the node \\(y\\) from being left floating. However, it does not retain a previous logic value in a cross-coupled latch. Other isolated nodes can still have leakage-related limits, so the claim that it universally removes the minimum clock-frequency requirement is too strong.",
        "format": "markdown",
        "sha256": "4804c0a44a158e1c123c88ff485af4d7d40fb8a1afd313d2f6e382a6b5321762"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly rejects the cross-coupled keeper interpretation and identifies the three-inversion loop, but misses the red inverter’s primary role as a feedforward path that bypasses and pre-drives the latch path. It also omits that this helps at high speed while overpowering the intended latch behavior at low clock rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 31977,
        "total_tokens": 33181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31596,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 31977,
        "total_tokens": 33181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31596,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(R_S=50~\\Omega\\) be the source resistance. The feedback resistor should not simply be set to \\(50~\\Omega\\); its value is transformed by the inverter gain.\n\nAssuming \\(C_1\\) is an RF short and the MOS gates draw negligible current, define\n\n\\[\nA_v=\\frac{v_o}{v_i}.\n\\]\n\nThe input current is\n\n\\[\ni_\\mathrm{in}=\\frac{v_i-v_o}{R_F}\n=\\frac{1-A_v}{R_F}v_i,\n\\]\n\nso\n\n\\[\nR_\\mathrm{in}\\simeq \\frac{R_F}{1-A_v}.\n\\]\n\nSince the inverter has negative gain,\n\n\\[\nR_F \\simeq 50(1+|A_v|).\n\\]\n\nIf \\(R_o\\) is the output resistance seen at the drain node, excluding \\(R_F\\), and\n\n\\[\ng_m=g_{m1}+g_{m2},\n\\]\n\nthen \\(A_v\\simeq-g_mR_o\\), giving the usual approximation\n\n\\[\nR_F\\simeq 50\\left(1+g_mR_o\\right).\n\\]\n\nIf loading by \\(R_F\\) is significant, the more accurate low-frequency result is\n\n\\[\nR_\\mathrm{in}=\\frac{R_F+R_o}{1+g_mR_o},\n\\]\n\nhence\n\n\\[\nR_F=50(1+g_mR_o)-R_o.\n\\]\n\nFor a first-order channel-noise model,\n\n\\[\nS_{i,d}=4kT\\left(\\gamma_1g_{m1}+\\gamma_2g_{m2}\\right),\n\\]\n\nand the feedback resistor contributes \\(4kT/R_F\\). A useful approximate noise-factor expression, neglecting gate-induced noise and correlations, is\n\n\\[\nF \\simeq\n1+\n\\frac{\\gamma_1g_{m1}+\\gamma_2g_{m2}}\n{(g_{m1}+g_{m2})^2R_S}\n+\\frac{R_S}{R_F}.\n\\]\n\nWith \\(R_S=50~\\Omega\\) and the matching condition substituted,\n\n\\[\nF\\simeq\n1+\n\\frac{\\gamma_\\mathrm{eff}}{g_mR_S}\n+\n\\frac{1}{1+g_mR_o},\n\\]\n\nwhere\n\n\\[\n\\gamma_\\mathrm{eff}\n=\n\\frac{\\gamma_1g_{m1}+\\gamma_2g_{m2}}\n{g_{m1}+g_{m2}}.\n\\]\n\nThus, in this simplified model, both noise terms decrease as \\(g_m\\) increases. Therefore:\n\n- maximize the feasible \\(g_{m1}+g_{m2}\\);\n- choose the \\(M_1/M_2\\) sizing and bias to minimize  \n  \\[\n  \\frac{\\gamma_1g_{m1}+\\gamma_2g_{m2}}\n  {(g_{m1}+g_{m2})^2};\n  \\]\n- after choosing the operating point, retune \\(R_F\\) to keep \\(R_\\mathrm{in}=50~\\Omega\\).\n\nThere is no finite optimum determined by \\(R_\\mathrm{in}=50~\\Omega\\) alone. Without constraints on power, transistor size, bandwidth, gain, linearity, and frequency, the idealized solution is simply to increase \\(g_m\\) and \\(R_F\\) together, making \\(F\\) approach unity. A practical optimum requires those additional constraints and a full RF noise simulation including \\(C_{gs}\\), \\(C_{gd}\\), gate-induced noise, \\(r_o\\), and noise correlations.",
        "format": "markdown",
        "sha256": "c8cb5f110b4f5fe139c1100f8ae4ff6cf5129bc396f292a54d6e88ec335054fe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly uses the finite-output-resistance input-match relation and recommends increasing gm while retuning RF to hold Rin at 50 Ω. It recognizes that this lets gm exceed 1/Rs and reduces NF below 1 + γ; its added practical constraints are consistent with the solution.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 53511,
        "total_tokens": 55978,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 52721,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 53511,
        "total_tokens": 55978,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 52721,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The \\(50~\\Omega\\) requirement should be treated as a constraint, not as the value of \\(R_F\\). \\(R_F\\) is transformed by the voltage gain of the CMOS inverter.\n\nAssume \\(V_{DD}\\) is an ac ground and define\n\n\\[\nG_m \\simeq g_{m1}+g_{m2}\n\\]\n\nand\n\n\\[\nR_o=r_{o1}\\parallel r_{o2}\\parallel R_L ,\n\\]\n\nwhere \\(R_L\\) is any output load. Neglecting the input capacitance for the moment, the input resistance is approximately\n\n\\[\nR_{\\text{in}}\\simeq \\frac{R_F}{1+G_mR_o}.\n\\]\n\nTherefore, for \\(R_{\\text{in}}=R_S=50~\\Omega\\),\n\n\\[\n\\boxed{R_F\\simeq 50(1+G_mR_o)}\n\\]\n\nwhen the loading of \\(R_F\\) on the output is negligible.\n\nIf that loading is significant, the more accurate result is\n\n\\[\nR_{\\text{in}}=\\frac{R_F+R_o}{1+G_mR_o}\n\\]\n\nand consequently\n\n\\[\n\\boxed{R_F=50(1+G_mR_o)-R_o}.\n\\]\n\nEquivalently, if \\(A_v\\) is the actual small-signal gain from the input node to the output,\n\n\\[\nR_{\\text{in}}=\\frac{R_F}{1-A_v},\n\\]\n\nso \\(R_F=50(1-A_v)\\).\n\nFor a first-order noise calculation, the drain-current noise of \\(M_1\\) and \\(M_2\\) is\n\n\\[\nS_{i,o}=4kT\\left(\\gamma_n g_{m1}+\\gamma_p g_{m2}\\right).\n\\]\n\nThe approximate noise factor is then\n\n\\[\nF \\simeq 1+\n\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}\n{G_m^2R_S}\n+\\frac{R_S}{R_F}\n+\\Delta F_{\\text{gate}}+\\Delta F_{C_1}+\\cdots .\n\\]\n\nWith \\(R_S=50~\\Omega\\),\n\n\\[\nF \\simeq 1+\n\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}\n{50(g_{m1}+g_{m2})^2}\n+\\frac{50}{R_F}+\\cdots .\n\\]\n\nThus the design should maximize the noise efficiency\n\n\\[\n\\frac{G_m^2}\n{\\gamma_n g_{m1}+\\gamma_p g_{m2}},\n\\]\n\nwhile choosing \\(R_F\\) afterward to restore the \\(50~\\Omega\\) input resistance.\n\nFor the simple case \\(\\gamma_n\\simeq\\gamma_p=\\gamma\\),\n\n\\[\nF-1 \\simeq\n\\frac{\\gamma}{G_mR_S}\n+\\frac{1}{1+G_mR_o}.\n\\]\n\nThis shows that, in the idealized model, increasing \\(G_m\\) lowers both the transistor-noise contribution and the feedback-resistor contribution. Hence there is no finite optimum based only on the \\(50~\\Omega\\) constraint; the optimum is set by power, bandwidth, device area, gain, linearity, and stability limits. At RF, gate-induced noise, \\(C_{gs1}+C_{gs2}\\), correlation, and the loss of \\(C_1\\) must also be included.\n\nIn practice:\n\n1. Select the bias current and transistor sizes.\n2. Extract \\(g_m\\), \\(r_o\\), capacitances, and noise parameters.\n3. Set \\(R_F\\) using the input-match equation.\n4. Run noise analysis with a \\(50~\\Omega\\) source.\n5. Sweep current and the \\(M_1/M_2\\) sizing ratio, retuning \\(R_F\\) each time.\n6. Select the minimum \\(NF=10\\log_{10}F\\) subject to the power and bandwidth constraints.\n\nAlso note that \\(R_{\\text{in}}=50~\\Omega\\) only specifies the resistive part. If \\(Z_{\\text{in}}=50+j0~\\Omega\\) is required, the input capacitance must additionally be tuned or matched.",
        "format": "markdown",
        "sha256": "7f5208c6b0addb6a092c251e482f79993d01a37c668d21b58c3fb3448c4b2e6b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the finite-output-resistance match relation and explains that increasing gm while retuning RF preserves 50 Ω and lowers NF, allowing it below 1 + γ. The added practical caveats and approximations do not change the essential conclusion.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 41663,
        "total_tokens": 44130,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 40738,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 41663,
        "total_tokens": 44130,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 40738,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(F\\) denote the **linear** noise factor, with \\(NF_{\\mathrm{dB}}=10\\log_{10}F\\). The 50-\\(\\Omega\\) requirement should be treated as a constraint; \\(R_F\\) is not generally equal to \\(50~\\Omega\\).\n\n### 1. Enforce the input match\n\nFor the complementary inverter,\n\n\\[\ng_{m,\\Sigma}=g_{m1}+g_{m2}.\n\\]\n\nLet \\(R_X\\) be the small-signal resistance at the output, excluding \\(R_F\\):\n\n\\[\nR_X \\simeq r_{o1}\\parallel r_{o2}\\parallel R_L .\n\\]\n\nThe voltage gain is approximately\n\n\\[\nA_v\\simeq -g_{m,\\Sigma}R_X .\n\\]\n\nSince the input current flows through the feedback resistor,\n\n\\[\nY_{\\mathrm{in}}\\simeq \\frac{1-A_v}{R_F},\n\\]\n\nso\n\n\\[\nR_{\\mathrm{in}}\\simeq \\frac{R_F}{1+g_{m,\\Sigma}R_X}.\n\\]\n\nTherefore, for a \\(50~\\Omega\\) input,\n\n\\[\n\\boxed{R_F\\simeq 50\\left(1+g_{m,\\Sigma}R_X\\right)}.\n\\]\n\nEquivalently, using the actual loaded gain,\n\n\\[\n\\boxed{R_F=50(1-A_v)}.\n\\]\n\nIf \\(R_F\\) significantly loads the output, calculate \\(A_v\\) including \\(R_F\\) and solve the equation iteratively. In a simple purely resistive model,\n\n\\[\nR_{\\mathrm{in}}=\\frac{R_F+R_X}{1+g_{m,\\Sigma}R_X}.\n\\]\n\nAt RF frequencies, use the full complex input impedance. A true match requires\n\n\\[\nZ_{\\mathrm{in}}=50+j0~\\Omega,\n\\]\n\nnot merely \\(\\operatorname{Re}\\{Z_{\\mathrm{in}}\\}=50~\\Omega\\).\n\n### 2. Estimate the noise factor\n\nIgnoring gate-induced noise and parasitic losses initially, the channel-noise current is\n\n\\[\nS_{i_d}=4kT\\left(\\gamma_n g_{m1}+\\gamma_p g_{m2}\\right).\n\\]\n\nA useful first-order noise-factor estimate is\n\n\\[\nF \\simeq\n1+\n\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}\n{R_s(g_{m1}+g_{m2})^2}\n+\n\\frac{R_s}{R_F}\n+\\Delta F_{\\mathrm{other}},\n\\]\n\nwhere \\(R_s=50~\\Omega\\), and \\(\\Delta F_{\\mathrm{other}}\\) includes gate-induced noise, gate resistance, capacitor ESR, noise correlation, and other losses.\n\nAfter imposing the input-match condition,\n\n\\[\nF \\simeq\n1+\n\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}\n{50(g_{m1}+g_{m2})^2}\n+\n\\frac{1}{1+(g_{m1}+g_{m2})R_X}\n+\\Delta F_{\\mathrm{other}}.\n\\]\n\nFor approximately equal noise coefficients, \\(\\gamma_n\\simeq\\gamma_p=\\gamma\\),\n\n\\[\nF-1\\simeq\n\\frac{\\gamma}{50g_{m,\\Sigma}}\n+\n\\frac{1}{1+g_{m,\\Sigma}R_X}\n+\\Delta F_{\\mathrm{other}}.\n\\]\n\nThus, in this simplified model, increasing \\(g_{m,\\Sigma}\\) reduces both the transistor-noise contribution and the feedback-resistor contribution. As \\(g_{m,\\Sigma}\\) is increased, \\(R_F\\) must be increased accordingly to retain \\(R_{\\mathrm{in}}=50~\\Omega\\).\n\n### 3. Practical optimization\n\nThe practical optimization is therefore\n\n\\[\n\\min NF(W_1,L_1,W_2,L_2,I_D,R_F,\\ldots)\n\\]\n\nsubject to\n\n\\[\nZ_{\\mathrm{in}}=50~\\Omega,\n\\]\n\nand constraints on power, gain, bandwidth, linearity, and stability.\n\nFor each transistor bias and sizing:\n\n1. Extract \\(g_m\\), \\(r_o\\), \\(C_{gs}\\), \\(C_{gd}\\), and the device noise parameters.\n2. Select or solve for \\(R_F\\) so that the input remains matched.\n3. Tune the input network, including \\(C_1\\), for the required reactance.\n4. Run a full noise or PNoise analysis, including the thermal noise of \\(R_F\\).\n5. Choose the minimum NF design subject to power and gain requirements.\n\nFor a fixed total \\(g_m\\), the device-size split should minimize\n\n\\[\n\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}\n{(g_{m1}+g_{m2})^2}.\n\\]\n\nIf the two noise coefficients are similar, the split has little first-order effect on NF; then \\(g_m/I_D\\), input capacitance, \\(f_T\\), and gate resistance determine the optimum. Without limits on power, transistor size, bandwidth, or stability, the simplified model has no finite optimum—it simply favors increasing \\(g_{m1}+g_{m2}\\).",
        "format": "markdown",
        "sha256": "200d2a5e35ab8b889482de03a2af767e48ff60399768eae3dc94ce573426820e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly includes finite output resistance in the input-match relation and recommends increasing gm while adjusting RF to keep Rin at 50 Ω. Its noise estimate shows NF decreasing with gm, capturing the key optimization rather than fixing gm at 1/Rs.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 43506,
        "total_tokens": 45973,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42362,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 43506,
        "total_tokens": 45973,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42362,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_p\\) be a small-signal test voltage applied at node \\(P\\), and let the voltage gain from \\(P\\) to the output be\n\n\\[\nA_v(s)=\\frac{v_{\\text{out}}}{v_p}.\n\\]\n\nThe input current is the sum of the capacitor current and the current through \\(R_F\\):\n\n\\[\ni_{\\text{in}}\n=sC_{\\text{in}}v_p+\\frac{v_p-v_{\\text{out}}}{R_F}.\n\\]\n\nTherefore,\n\n\\[\ni_{\\text{in}}\n=v_p\\left[sC_{\\text{in}}+\\frac{1-A_v(s)}{R_F}\\right],\n\\]\n\nso the input impedance is\n\n\\[\n\\boxed{\nZ_{\\text{in}}(s)\n=\n\\frac{1}{\nsC_{\\text{in}}+\\dfrac{1-A_v(s)}{R_F}\n}\n}\n\\]\n\nor, if \\(A_v\\) is approximately frequency-independent,\n\n\\[\n\\boxed{\nZ_{\\text{in}}(j\\omega)\n=\n\\frac{R_F}\n{1-A_v+j\\omega R_F C_{\\text{in}}}\n}\n\\]\n\nwith the equivalent input resistance\n\n\\[\n\\boxed{\nR_{\\text{in}}=\\frac{R_F}{1-A_v}.\n}\n\\]\n\nFor an inverting amplifier, \\(A_v=-A\\), where \\(A>0\\), giving\n\n\\[\nZ_{\\text{in}}=\n\\frac{R_F}{1+A+j\\omega R_FC_{\\text{in}}},\n\\qquad\nR_{\\text{in}}=\\frac{R_F}{1+A}.\n\\]\n\nThe transistor parameters enter through the small-signal gain \\(A_v\\); without those parameters, no numerical value can be obtained.",
        "format": "markdown",
        "sha256": "cdeafffd0a1e655b4fde92166989c34d5680b3f1c7e971d0b6e06f6fc87b97aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that feedback lowers the input impedance, but gives only the approximation \\(R_F/(1+A)\\). It misses the required output-side resistance, so the exact result is \\((R_F+R_{D2})/(1+A_0)\\), and does not identify the unloaded gain \\(A_0\\).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 34052,
        "total_tokens": 34262,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33668,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 34052,
        "total_tokens": 34262,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33668,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_p\\) be the small-signal voltage at node \\(P\\). Assume an ideal \\(I_{SS}\\), negligible MOS output conductances, and \\(V_{DD}\\) and \\(V_b\\) are ac grounds.\n\nFor \\(M_1\\),\n\n\\[\nv_x=-g_{m1}R_{D1}v_p .\n\\]\n\nThe \\(M_2\\)-\\(M_3\\) pair has a small-signal transconductance\n\n\\[\ng_{m,\\mathrm{eq}}\n=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}},\n\\]\n\nso the small-signal current delivered by \\(M_3\\) to the output is\n\n\\[\ni_3=g_{m,\\mathrm{eq}}v_x\n=-g_{m1}R_{D1}g_{m,\\mathrm{eq}}v_p.\n\\]\n\nDefine\n\n\\[\nK=g_{m1}R_{D1}\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}.\n\\]\n\nThe input current is\n\n\\[\ni_{\\mathrm{in}}\n=sC_{\\mathrm{in}}v_p+\\frac{v_p-v_{\\mathrm{out}}}{R_F}.\n\\]\n\nIncluding the loading of \\(R_F\\) on the output, the output-node equation is\n\n\\[\n\\frac{v_{\\mathrm{out}}}{R_{D2}}\n+\\frac{v_{\\mathrm{out}}-v_p}{R_F}\n=-K v_p.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nZ_{\\mathrm{in}}(s)\n=\n\\left[\nsC_{\\mathrm{in}}\n+\\frac{1+K R_{D2}}{R_F+R_{D2}}\n\\right]^{-1}\n}\n\\]\n\nor, with \\(s=j\\omega\\),\n\n\\[\n\\boxed{\nZ_{\\mathrm{in}}(j\\omega)\n=\n\\frac{R_F+R_{D2}}\n{1+K R_{D2}+j\\omega C_{\\mathrm{in}}(R_F+R_{D2})}\n}.\n\\]\n\nThus the low-frequency input resistance is\n\n\\[\n\\boxed{\nR_{\\mathrm{in}}\n=\n\\frac{R_F+R_{D2}}\n{1+\ng_{m1}R_{D1}R_{D2}\n\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}}\n}.\n\\]\n\nIf \\(R_F\\gg R_{D2}\\), the commonly used approximation is\n\n\\[\nZ_{\\mathrm{in}}\\approx\n\\left[\nj\\omega C_{\\mathrm{in}}\n+\n\\frac{1+|A_v|}{R_F}\n\\right]^{-1},\n\\]\n\nwhere\n\n\\[\nA_v=\n-g_{m1}R_{D1}R_{D2}\n\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}.\n\\]",
        "format": "markdown",
        "sha256": "991e454a0bfe9c41cf557a2801f91ff71293434f4f91310683085f17071e97e0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The exact result has the golden form \u001b[?]",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 40537,
        "total_tokens": 40747,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39884,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 40537,
        "total_tokens": 40747,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39884,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_p\\) be the small-signal voltage at node \\(P\\), and let\n\n\\[\nA_v(s)=\\frac{v_{\\text{out}}(s)}{v_p(s)}\n\\]\n\nbe the voltage gain of the transistor amplifier from \\(P\\) to \\(V_{\\text{out}}\\). Neglecting MOS gate current, the input current is\n\n\\[\ni_{\\text{in}}=sC_{\\text{in}}v_p+\\frac{v_p-v_{\\text{out}}}{R_F}.\n\\]\n\nThus,\n\n\\[\n\\frac{i_{\\text{in}}}{v_p}\n=sC_{\\text{in}}+\\frac{1-A_v(s)}{R_F},\n\\]\n\nand therefore\n\n\\[\n\\boxed{\nZ_{\\text{in}}(s)=\n\\left[sC_{\\text{in}}+\\frac{1-A_v(s)}{R_F}\\right]^{-1}\n=\n\\frac{R_F}{1-A_v(s)+sR_FC_{\\text{in}}}\n}\n\\]\n\nFor an inverting forward amplifier, write \\(A_v=-G\\), where \\(G>0\\). Then\n\n\\[\n\\boxed{\nZ_{\\text{in}}(s)=\n\\left[\\frac{1+G}{R_F}+sC_{\\text{in}}\\right]^{-1}\n}\n\\]\n\nor equivalently,\n\n\\[\nZ_{\\text{in}}(s)=\n\\frac{R_F}{1+G+sR_FC_{\\text{in}}}.\n\\]\n\nAt low frequency,\n\n\\[\n\\boxed{R_{\\text{in}}=\\frac{R_F}{1+G}}\n\\]\n\nso the feedback reduces the input resistance by the factor \\(1+G\\). Here \\(G\\) is the small-signal gain magnitude of the \\(M_1\\)-\\(M_3\\) amplifier; its numerical value requires the \\(g_m\\), \\(r_o\\), and load parameters.",
        "format": "markdown",
        "sha256": "52c35a6cdfa2fa6f101a4de956a0d2bd98c7e3cb505abcd8c9015f38a0577a5b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the feedback-induced reduction in input resistance, but gives only the simplified form RF/(1+G). It omits the output-side resistance required for the exact result, (RF+RD2)/(1+A0), and does not define the unloaded gain A0.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 49110,
        "total_tokens": 49320,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 48690,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 49110,
        "total_tokens": 49320,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 48690,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the LDO noise as a noise source on the VCO supply and find the supply-to-phase transfer function.\n\nLet \\(v_n\\) be the LDO output-referred noise and define the VCO supply-pushing sensitivity as\n\n\\[\nK_{VDD}=\\frac{\\partial \\omega_0}{\\partial V_{\\text{out}}}\n\\quad [\\mathrm{rad/s/V}]\n\\]\n\nor, equivalently,\n\n\\[\nK_f=\\frac{\\partial f_0}{\\partial V_{\\text{out}}}\n\\quad [\\mathrm{Hz/V}].\n\\]\n\nA supply fluctuation changes the instantaneous oscillation frequency:\n\n\\[\n\\delta\\omega(t)=K_{VDD}v_n(t),\n\\]\n\nso that\n\n\\[\n\\frac{d\\phi(t)}{dt}=\\delta\\omega(t).\n\\]\n\nTherefore, at offset frequency \\(f_m\\),\n\n\\[\nS_{\\phi,\\mathrm{LDO}}(f_m)\n=\n\\left|\\frac{K_{VDD}}{j2\\pi f_m}\\right|^2\nS_{v,\\mathrm{out}}(f_m),\n\\]\n\nwhere \\(S_{\\phi}\\) has units of \\(\\mathrm{rad^2/Hz}\\). Using \\(K_f\\) instead,\n\n\\[\nS_{\\phi,\\mathrm{LDO}}(f_m)\n=\n\\left(\\frac{K_f}{f_m}\\right)^2\nS_{v,\\mathrm{out}}(f_m).\n\\]\n\nFor a one-sided phase-noise PSD, the single-sideband phase noise is\n\n\\[\n\\boxed{\n\\mathcal L_{\\mathrm{LDO}}(f_m)\n=\n\\frac{1}{2}S_{\\phi,\\mathrm{LDO}}(f_m)\n}\n\\]\n\nor in dBc/Hz,\n\n\\[\n\\boxed{\n\\mathcal L_{\\mathrm{LDO}}(f_m)\\big|_{\\mathrm{dBc/Hz}}\n=\n10\\log_{10}\n\\left[\n\\frac{K_{VDD}^{\\,2}S_{v,\\mathrm{out}}(f_m)}\n{2(2\\pi f_m)^2}\n\\right].\n}\n\\]\n\nIf \\(S_{\\mathrm{th}}\\) is already the LDO output voltage-noise spectrum, then \\(S_{v,\\mathrm{out}}=S_{\\mathrm{th}}\\). Otherwise, refer the internal LDO noise to its output:\n\n\\[\nS_{v,\\mathrm{out}}(f)\n=\n|H_{n,\\mathrm{LDO}}(f)|^2S_{\\mathrm{th}}(f).\n\\]\n\nFor a current-noise model,\n\n\\[\nS_{v,\\mathrm{out}}(f)\n=\n|Z_{\\mathrm{out}}(f)|^2S_{i,\\mathrm{th}}(f).\n\\]\n\nThus the general result is\n\n\\[\n\\mathcal L_{\\mathrm{LDO}}(f_m)\n=\n\\frac{1}{2}\n\\left|\n\\frac{K_{VDD}H_{n,\\mathrm{LDO}}(f_m)}\n{j2\\pi f_m}\n\\right|^2\nS_{\\mathrm{th}}(f_m).\n\\]\n\nThe supply-pushing coefficient \\(K_{VDD}\\) can be obtained from the slope of \\(f_0\\) versus \\(V_{\\text{out}}\\), or from a periodic small-signal/PSS simulation. The figure alone is not sufficient for a numerical result. If the VCO has intrinsic phase noise, add the independent contributions in linear units, not directly in dB.",
        "format": "markdown",
        "sha256": "4a8f256afb53b4a29ed7e11b72409fc1972267fd0b288f7a7d2e0921c3fe668a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly models supply pushing and converts LDO voltage-noise PSD to phase noise with the expected 1/offset-frequency-squared dependence. It omits the circuit-specific insight that the supply directly perturbs the varactors, making the pushing sensitivity closely related to KVCO, and that reducing KVCO lowers this noise conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 8529,
        "total_tokens": 11923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 8529,
        "total_tokens": 11923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let the LDO noise appear at the VCO supply as \\(v_{n,\\mathrm{out}}\\). The calculation has two parts:\n\n1. **Refer the LDO noise to the VCO supply**\n\\[\nS_{v_{\\mathrm{out}}}(\\Delta f)\n=\n\\left|H_{\\mathrm{LDO,n}}(\\Delta f)\\right|^2\nS_{\\mathrm{th}}(\\Delta f)\n\\]\n\nwhere \\(H_{\\mathrm{LDO,n}}\\) is the transfer function from the LDO’s internal noise source to \\(V_{\\mathrm{out}}\\).\n\n- If \\(S_{\\mathrm{th}}\\) is already the voltage-noise PSD at \\(V_{\\mathrm{out}}\\), then \\(H_{\\mathrm{LDO,n}}=1\\).\n- If \\(S_{\\mathrm{th}}\\) is an output current-noise PSD,\n\\[\nS_{v_{\\mathrm{out}}}(\\Delta f)\n=\n\\left|Z_{\\mathrm{out}}(\\Delta f)\\right|^2\nS_{i,\\mathrm{th}}(\\Delta f).\n\\]\n\n2. **Convert supply noise to phase noise**\n\nDefine the VCO supply-pushing sensitivity as\n\\[\nK_{\\omega,\\mathrm{sup}}\n=\n\\frac{\\partial \\omega_0}{\\partial V_{\\mathrm{out}}}\n\\qquad [\\mathrm{rad/s/V}].\n\\]\n\nA supply perturbation produces an instantaneous frequency perturbation\n\\[\n\\delta\\omega_0(t)=K_{\\omega,\\mathrm{sup}}v_{n,\\mathrm{out}}(t),\n\\]\nand since \\(\\dot{\\phi}(t)=\\delta\\omega_0(t)\\),\n\\[\nS_{\\phi,\\mathrm{LDO}}(\\Delta f)\n=\n\\left|\n\\frac{K_{\\omega,\\mathrm{sup}}}{j2\\pi\\Delta f}\n\\right|^2\nS_{v_{\\mathrm{out}}}(\\Delta f).\n\\]\n\nTherefore,\n\\[\n\\boxed{\nS_{\\phi,\\mathrm{LDO}}(\\Delta f)\n=\n\\left|\n\\frac{K_{\\omega,\\mathrm{sup}}H_{\\mathrm{LDO,n}}(\\Delta f)}\n{j2\\pi\\Delta f}\n\\right|^2\nS_{\\mathrm{th}}(\\Delta f)\n}\n\\]\n\nIf the VCO gain is specified in Hz/V,\n\\[\nK_{f,\\mathrm{sup}}=\\frac{\\partial f_0}{\\partial V_{\\mathrm{out}}},\n\\]\nthen equivalently\n\\[\nS_{\\phi,\\mathrm{LDO}}(\\Delta f)\n=\n\\left|\\frac{K_{f,\\mathrm{sup}}}{\\Delta f}\\right|^2\nS_{v_{\\mathrm{out}}}(\\Delta f).\n\\]\n\nThe single-sideband phase noise is, under the usual convention,\n\\[\n\\boxed{\n\\mathcal L_{\\mathrm{LDO}}(\\Delta f)\n=\n\\frac{1}{2}S_{\\phi,\\mathrm{LDO}}(\\Delta f)\n}\n\\]\nin linear units, or\n\\[\n\\mathcal L_{\\mathrm{dBc/Hz}}\n=\n10\\log_{10}\\left(\\mathcal L_{\\mathrm{LDO}}\\right).\n\\]\n\nThus, white LDO voltage noise produces a \\(1/\\Delta f^2\\) phase-noise contribution, unless the LDO output impedance or noise-transfer function adds poles and zeros. A numerical result requires the LDO noise transfer/output impedance and the VCO’s supply-pushing coefficient; the ordinary tuning gain with respect to \\(V_{\\mathrm{cont}}\\) is not sufficient.",
        "format": "markdown",
        "sha256": "646cb5cc7e2a40e6a1a420e8e4d7ec6a70b9e0488ea018ecbaec652a04be9c0d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly converts LDO supply noise through the supply-pushing sensitivity and FM integration, including the 1/Δf² dependence and SSB factor. It omits the circuit-specific insight that supply perturbation acts directly on the varactors, making Kpush closely related to KVCO and lower KVCO beneficial; its closing remark may overstate their distinction.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 19924,
        "total_tokens": 23318,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 19924,
        "total_tokens": 23318,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(\\Delta f\\) denote the offset from the VCO carrier. The LDO noise must first be referred to the VCO supply node, and then converted to phase fluctuations through the VCO’s supply-pushing sensitivity.\n\nDefine the LDO-noise-to-VCO-supply transfer as \\(H_{n\\rightarrow V_s}(\\Delta f)\\), where \\(V_s=V_{\\text{out}}\\). Then\n\n\\[\nS_{V_s}(\\Delta f)\n=\n\\left|H_{n\\rightarrow V_s}(\\Delta f)\\right|^2\nS_{\\text{th}}(\\Delta f).\n\\]\n\nIf \\(S_{\\text{th}}\\) is already the output-referred LDO voltage-noise PSD, then \\(H_{n\\rightarrow V_s}=1\\). If the LDO noise is an output current noise,\n\n\\[\nS_{V_s}(\\Delta f)\n=\n\\left|Z_{\\text{out}}(\\Delta f)\\right|^2\nS_{i,\\text{th}}(\\Delta f).\n\\]\n\nThe VCO supply-pushing coefficient is\n\n\\[\nK_{\\text{push}}\n=\n\\left.\\frac{\\partial \\omega_0}{\\partial V_s}\\right|_{V_s=V_{s0}}\n\\qquad [\\mathrm{rad/s/V}].\n\\]\n\nA supply perturbation produces an instantaneous frequency perturbation\n\n\\[\n\\delta\\omega(t)=K_{\\text{push}}v_s(t),\n\\]\n\nso the phase perturbation is the integral of this frequency perturbation:\n\n\\[\n\\Phi(j2\\pi\\Delta f)\n=\n\\frac{K_{\\text{push}}}{j2\\pi\\Delta f}\nV_s(j2\\pi\\Delta f).\n\\]\n\nTherefore, the LDO-induced VCO phase-noise PSD is\n\n\\[\n\\boxed{\nS_{\\phi,\\text{LDO}}(\\Delta f)\n=\n\\frac{|K_{\\text{push}}|^2}{(2\\pi\\Delta f)^2}\n\\left|H_{n\\rightarrow V_s}(\\Delta f)\\right|^2\nS_{\\text{th}}(\\Delta f)\n}\n\\]\n\nin \\(\\mathrm{rad^2/Hz}\\).\n\nIf the supply-pushing coefficient is instead defined as\n\n\\[\nK_f=\\frac{\\partial f_0}{\\partial V_s}\\quad [\\mathrm{Hz/V}],\n\\]\n\nthen the equivalent expression is\n\n\\[\nS_{\\phi,\\text{LDO}}(\\Delta f)\n=\n\\left(\\frac{K_f}{\\Delta f}\\right)^2\nS_{V_s}(\\Delta f).\n\\]\n\nUsing the usual single-sideband phase-noise convention,\n\n\\[\n\\boxed{\n\\mathcal L_{\\text{LDO}}(\\Delta f)\n=\n\\frac{1}{2}S_{\\phi,\\text{LDO}}(\\Delta f)\n}\n\\]\n\nand in dBc/Hz,\n\n\\[\n\\mathcal L_{\\text{LDO,dBc/Hz}}\n=\n10\\log_{10}\\!\\left[\n\\frac{|K_{\\text{push}}|^2\n|H_{n\\rightarrow V_s}|^2\nS_{\\text{th}}}\n{2(2\\pi\\Delta f)^2}\n\\right].\n\\]\n\nFor white LDO voltage noise and a flat supply path, this contribution has a \\(1/\\Delta f^2\\) dependence, or \\(-20\\) dB/decade. The total phase noise is obtained by adding the LDO contribution and the intrinsic VCO phase noise in linear units:\n\n\\[\n\\mathcal L_{\\text{total}}\n=\n\\mathcal L_{\\text{VCO,intrinsic}}\n+\n\\mathcal L_{\\text{LDO}}+\\cdots\n\\]\n\nA numerical result requires \\(K_{\\text{push}}\\), which can be obtained by sweeping the VCO supply voltage or by a PSS/PXF/PNoise simulation.",
        "format": "markdown",
        "sha256": "131c1b66c82c76a2ffb7b6ecac6f52734fb8e4a61c36abe63d0b8d62197d0763"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly derives the supply-noise-to-phase-noise conversion using supply pushing, including the 1/Δf² dependence and SSB convention. It omits the circuit-specific insight that the supply directly perturbs the varactors, making Kpush closely related to KVCO, so reducing KVCO reduces this noise conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 15339,
        "total_tokens": 18733,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 15339,
        "total_tokens": 18733,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) usually **reduces the phase-noise contribution of the tail current source**.\n\nThe tail node \\(P\\) is a common-mode node. Its RF voltage, particularly the component near \\(2f_0\\), is produced by the sum of the currents in \\(M_1\\) and \\(M_2\\). The tail-current-source noise is converted to differential phase noise through this node. With \\(C_T\\),\n\n\\[\nZ_P(j\\omega)\\approx\n\\left(\\frac{1}{R_{\\text{tail}}}+j\\omega C_T\\right)^{-1},\n\\]\n\nso at the relevant RF harmonics \\(P\\) becomes a low-impedance node. Consequently,\n\n\\[\nS_{v_P}(\\omega)\\approx |Z_P(j\\omega)|^2 S_{i_{SS}}(\\omega),\n\\]\n\nand the upconversion of \\(I_{SS}\\) noise to oscillator phase noise is reduced. In a symmetric oscillator, \\(C_T\\) ideally does not significantly load the differential tank at \\(f_0\\); it mainly suppresses common-mode and second-harmonic tail motion.\n\nHowever, \\(C_T\\) does **not** reduce tank-loss noise or all of the noise from \\(M_1\\) and \\(M_2\\). It is also less effective against low-frequency tail flicker noise, and an excessively large capacitor can alter the waveform and noise conversion. Thus the usual result is a lower total phase noise—until another noise source dominates—but the exact change requires the device and tank parameters.",
        "format": "markdown",
        "sha256": "18ef0a76bc23e5faaad70cd4f5fb603cf1bbb3474ee565c823c9eb2bfbfd7448"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives the monotonic filtering explanation and concludes that CT usually lowers phase noise. It does not identify the nonmonotonic behavior or the class-C improvement and degradation mechanisms; the vague caveat about waveform changes is insufficient.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 15353,
        "total_tokens": 18920,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 15353,
        "total_tokens": 18920,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(C_T\\) generally **reduces the phase-noise contribution of the tail current source**.\n\nAt RF, the tail-node impedance becomes\n\n\\[\nZ_P(\\omega)\\simeq r_{o,\\mathrm{SS}}\\parallel \\frac{1}{j\\omega C_T}.\n\\]\n\nThus, tail-current noise produces a smaller tail-node voltage:\n\n\\[\nv_{n,P}(\\omega)=i_{n,\\mathrm{SS}}(\\omega)Z_P(\\omega).\n\\]\n\nThe reduced voltage at \\(P\\) causes less modulation of \\(V_{GS1}\\) and \\(V_{GS2}\\), and hence less conversion of tail noise into oscillator phase noise. It also suppresses the common-mode signal and noise, particularly the strong component near \\(2f_0\\), where\n\n\\[\n|Z_{C_T}(2\\omega_0)|=\\frac{1}{2\\omega_0 C_T}.\n\\]\n\nSo, if the tail current source is a significant noise contributor, the measured phase noise improves. The improvement is not unlimited: tank loss and \\(M_1/M_2\\) noise remain, and low-frequency \\(1/f\\) noise may be only weakly filtered. In an ideal perfectly symmetric oscillator with a noiseless tail source, \\(C_T\\) has little effect on the differential-mode phase noise.",
        "format": "markdown",
        "sha256": "3a086bb134ed8e0424af72f62e5e723bc80b7555fba2b3db0df3641675a8486a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives a generally monotonic phase-noise improvement from filtering tail-node noise, missing the nonmonotonic effect and the class-C improvement and possible degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 9607,
        "total_tokens": 13174,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 9607,
        "total_tokens": 13174,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) normally **reduces the phase-noise contribution of the tail current source**.\n\nAt RF, the tail-node impedance becomes\n\n\\[\nZ_P(\\omega)\\approx R_{P,\\mathrm{eff}}\\parallel \\frac{1}{j\\omega C_T}.\n\\]\n\nThus, tail-current noise produces a smaller tail-voltage fluctuation:\n\n\\[\nS_{v_P}(\\omega)=S_{i_{SS}}(\\omega)|Z_P(\\omega)|^2.\n\\]\n\nThe reduced \\(v_P\\) means less \\(g_m\\) modulation and less conversion of common-mode tail noise into differential phase noise. In a differential LC oscillator, this is especially useful at approximately \\(2\\omega_0\\), where the sum of the two transistor currents has a strong common-mode component. \\(C_T\\) should therefore provide a low impedance at \\(2\\omega_0\\).\n\nFor example, if the tail node is modeled by \\(R_{P,\\mathrm{eff}}\\),\n\n\\[\n\\frac{S_{v_P}(C_T)}{S_{v_P}(0)}\n\\approx\n\\frac{1}{1+(2\\omega_0R_{P,\\mathrm{eff}}C_T)^2}.\n\\]\n\nSo the phase-noise curve generally moves downward if the tail source is a significant noise contributor. The total phase noise is not necessarily reduced by the same amount: tank loss and \\(M_1/M_2\\) noise are largely unaffected, and low-frequency flicker-noise upconversion may remain. In an ideal perfectly balanced model with a noiseless tail source, \\(C_T\\) would produce essentially no phase-noise improvement.",
        "format": "markdown",
        "sha256": "0bec696023113b6be5d29e07849a8617fe79ee43b3be2a844d08bb15961d0fd1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that CT generally reduces phase noise by filtering tail-current noise, missing the nonmonotonic behavior and the class-C improvement mechanism. Mentioning that flicker-noise upconversion may remain does not capture CT’s role in that degradation.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 25732,
        "total_tokens": 29299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25380,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 25732,
        "total_tokens": 29299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25380,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a pair of cross-coupled LC oscillators. The active transistors provide negative resistance, while the oscillation frequency is set mainly by the tank resonance:\n\n\\[\nf_{\\mathrm{osc}}\\approx \\frac{1}{2\\pi\\sqrt{L_{\\mathrm{eff}}C_{\\mathrm{eff}}}}.\n\\]\n\nFor identical inductors \\(L\\) and total capacitance \\(C_p\\) at each output node \\(X_i,Y_i\\),\n\n\\[\nf_{\\mathrm{osc}}\\approx \\frac{1}{2\\pi\\sqrt{LC_p}}.\n\\]\n\nHere \\(C_p\\) includes transistor junction and gate capacitances, wiring capacitance, and any external load. The current sources primarily set the transconductance, startup condition, and amplitude; they do not directly determine the ideal frequency.\n\nSince the figure gives neither the inductance nor the effective capacitance, a numerical frequency cannot be determined. If the transistors were treated as ideal with zero parasitic capacitance, the circuit would have no finite, well-defined oscillation frequency.",
        "format": "markdown",
        "sha256": "0259520429434c0c5f64e7b1671650ae3c27444168105ab2e634ee946ae639e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The tank-resonance estimate is correct, but the answer omits the essential coupling-induced frequency shift that distinguishes this coupled oscillator from an isolated LC tank.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 6960,
        "total_tokens": 8761,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 6960,
        "total_tokens": 8761,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The oscillation frequency is set primarily by the LC tanks; the cross-coupled MOSFETs provide the negative resistance needed to sustain oscillation.\n\nFor one tank, let \\(L\\) be the inductance of either branch and \\(C_T\\) the total capacitance at an \\(X\\) or \\(Y\\) node, including MOSFET, wiring, and inductor parasitics. Then\n\n\\[\n\\omega_0 \\approx \\frac{1}{\\sqrt{LC_T}},\n\\qquad\nf_0 \\approx \\frac{1}{2\\pi\\sqrt{LC_T}} .\n\\]\n\nBoth coupled oscillator cores operate at approximately this frequency. The current sources \\(I_{SS}\\) and \\(I_1\\) mainly set the transconductance, startup condition, and amplitude, with only a small effect on frequency.\n\nNo numerical frequency can be obtained from the figure alone because the inductance and tank capacitance values are not specified. If \\(C_d\\) is defined as a single capacitance directly between \\(X\\) and \\(Y\\), use the equivalent differential inductance \\(2L\\):\n\n\\[\nf_0 \\approx \\frac{1}{2\\pi\\sqrt{(2L)C_d}}.\n\\]",
        "format": "markdown",
        "sha256": "d62f59360309644ef15f56a834621da8f7fee3f7bffefb73de6700a1aa8321d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly gives the tank resonance, but misses the central coupling-induced frequency shift (approximately αω₀/(2Q), or an equivalent expression) and treats the oscillation frequency as just the tank frequency.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 5448,
        "total_tokens": 7249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 5448,
        "total_tokens": 7249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-5.6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a cross-coupled LC oscillator. The MOSFETs provide the negative resistance needed to overcome tank losses, while the oscillation frequency is set primarily by the inductors and the total parasitic capacitance.\n\nFor each identical tank,\n\n\\[\n\\omega_0 \\approx \\frac{1}{\\sqrt{L C_{\\text{tot}}}},\n\\qquad\nf_0 \\approx \\frac{1}{2\\pi\\sqrt{L C_{\\text{tot}}}},\n\\]\n\nwhere \\(C_{\\text{tot}}\\) includes transistor, wiring, inductor self-capacitance, and load capacitances. For a differential equivalent circuit, use\n\n\\[\nf_0=\\frac{1}{2\\pi\\sqrt{L_{\\rm eq}C_{\\rm eq}}},\n\\]\n\nwith \\(L_{\\rm eq}=2L\\) if the two identical inductors are viewed in series across the differential output.\n\nA numerical frequency cannot be obtained from the drawing alone because no inductance or capacitance values are specified. The bias currents mainly set startup and amplitude, not the ideal oscillation frequency.",
        "format": "markdown",
        "sha256": "7bd0feaf2979b9650936f3417f16ff6aa20a75c3920e88367bc5c6617ec6580f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The uncoupled LC tank estimate is correct, but the answer omits the central coupling-induced frequency shift, so it does not estimate the actual oscillation frequency described by the solution.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 4378,
        "total_tokens": 6179,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 4378,
        "total_tokens": 6179,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
