{
  "model_key": "gpt_6_1_sol",
  "display_name": "GPT-6.1 Sol",
  "provider": "openai",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "GPT-6.1 Sol answered the 50 tasks in three rollouts through OpenRouter's chat completions route (openai/gpt-6.1-sol) at maximum reasoning effort. Requests set max_tokens to 128,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for GPT-6.1 Sol on 2026-11-10 ($2.00 input, $0.10 cached input, $10.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 124,
          "incorrect_count": 26,
          "partial_credit_count": 26,
          "zero_count": 0,
          "mean_score_0_to_4": 3.7133333333333334,
          "score_percent": 92.83333333333333,
          "score_distribution": {
            "1": 4,
            "2": 9,
            "3": 13,
            "4": 124
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 124,
          "incorrect_count": 26,
          "partial_credit_count": 26,
          "zero_count": 0,
          "mean_score_0_to_4": 3.7133333333333334,
          "score_percent": 92.83333333333333,
          "score_distribution": {
            "1": 4,
            "2": 9,
            "3": 13,
            "4": 124
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 88,
          "incorrect_count": 2,
          "partial_credit_count": 2,
          "zero_count": 0,
          "mean_score_0_to_4": 3.977777777777778,
          "score_percent": 99.44444444444444,
          "score_distribution": {
            "3": 2,
            "4": 88
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 88,
          "incorrect_count": 2,
          "partial_credit_count": 2,
          "zero_count": 0,
          "mean_score_0_to_4": 3.977777777777778,
          "score_percent": 99.44444444444444,
          "score_distribution": {
            "3": 2,
            "4": 88
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 36,
          "incorrect_count": 24,
          "partial_credit_count": 24,
          "zero_count": 0,
          "mean_score_0_to_4": 3.316666666666667,
          "score_percent": 82.91666666666667,
          "score_distribution": {
            "1": 4,
            "2": 9,
            "3": 11,
            "4": 36
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 36,
          "incorrect_count": 24,
          "partial_credit_count": 24,
          "zero_count": 0,
          "mean_score_0_to_4": 3.316666666666667,
          "score_percent": 82.91666666666667,
          "score_distribution": {
            "1": 4,
            "2": 9,
            "3": 11,
            "4": 36
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 41,
        "incorrect_count": 9,
        "partial_credit_count": 9,
        "zero_count": 0,
        "mean_score_0_to_4": 3.7,
        "score_percent": 92.5,
        "score_distribution": {
          "1": 2,
          "2": 2,
          "3": 5,
          "4": 41
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 43,
        "incorrect_count": 7,
        "partial_credit_count": 7,
        "zero_count": 0,
        "mean_score_0_to_4": 3.8,
        "score_percent": 95.0,
        "score_distribution": {
          "2": 3,
          "3": 4,
          "4": 43
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 40,
        "incorrect_count": 10,
        "partial_credit_count": 10,
        "zero_count": 0,
        "mean_score_0_to_4": 3.64,
        "score_percent": 91.0,
        "score_distribution": {
          "1": 2,
          "2": 4,
          "3": 4,
          "4": 40
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 137436,
        "input_tokens": 288942,
        "output_tokens": 802451,
        "total_tokens": 1091393
      },
      "known_totals": {
        "cached_input_tokens": 137436,
        "input_tokens": 288942,
        "output_tokens": 802451,
        "total_tokens": 1091393
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 30,
          "incorrect_count": 0,
          "partial_credit_count": 0,
          "zero_count": 0,
          "mean_score_0_to_4": 4.0,
          "score_percent": 100.0,
          "score_distribution": {
            "4": 30
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 29,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.966666666666667,
          "score_percent": 99.16666666666667,
          "score_distribution": {
            "3": 1,
            "4": 29
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 29,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.966666666666667,
          "score_percent": 99.16666666666667,
          "score_distribution": {
            "3": 1,
            "4": 29
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 11,
          "incorrect_count": 9,
          "partial_credit_count": 9,
          "zero_count": 0,
          "mean_score_0_to_4": 3.25,
          "score_percent": 81.25,
          "score_distribution": {
            "1": 2,
            "2": 2,
            "3": 5,
            "4": 11
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 14,
          "incorrect_count": 6,
          "partial_credit_count": 6,
          "zero_count": 0,
          "mean_score_0_to_4": 3.55,
          "score_percent": 88.75,
          "score_distribution": {
            "2": 3,
            "3": 3,
            "4": 14
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 11,
          "incorrect_count": 9,
          "partial_credit_count": 9,
          "zero_count": 0,
          "mean_score_0_to_4": 3.15,
          "score_percent": 78.75,
          "score_distribution": {
            "1": 2,
            "2": 4,
            "3": 3,
            "4": 11
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Its intrinsic gain approximately doubles**, assuming the same drain current, saturation operation, and the usual long-channel model.\n\nThe intrinsic gain is\n\\[\nA_{\\text{int}}=g_m r_o.\n\\]\n\n- Doubling both \\(W\\) and \\(L\\) leaves \\(W/L\\) unchanged, so \\(g_m\\) stays approximately constant at fixed current.\n- Channel-length modulation scales roughly as \\(\\lambda\\propto 1/L\\). Thus, doubling \\(L\\) approximately doubles \\(r_o=1/(\\lambda I_D)\\).\n\nTherefore,\n\\[\n\\boxed{A_{\\text{int,new}}\\approx 2A_{\\text{int,old}}}\n\\]\n—a gain increase of about **6 dB**. Actual scaling depends on the bias conditions and short-channel effects.",
        "format": "markdown",
        "sha256": "7045f8c705725bb9acd6827e7e8ee0c798bb8d41840e75c419a609883eb84b6f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: doubling both dimensions preserves W/L and gm, while the longer channel approximately doubles ro. The stated bias and model assumptions are appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1182,
        "total_tokens": 1208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1008,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1182,
        "total_tokens": 1208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1008,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Its intrinsic gain approximately doubles**, assuming the same drain current, saturation operation, and a long-channel model.\n\nThe intrinsic gain is\n\\[\nA_{\\text{int}}=g_m r_o.\n\\]\n\n- **Transconductance \\(g_m\\):** Doubling both \\(W\\) and \\(L\\) leaves \\(W/L\\) unchanged, so at fixed drain current, \\(g_m\\) stays approximately constant.\n- **Output resistance \\(r_o\\):** Since \\(r_o\\approx 1/(\\lambda I_D)\\) and channel-length modulation roughly follows \\(\\lambda\\propto 1/L\\), doubling \\(L\\) approximately doubles \\(r_o\\).\n\nThus,\n\\[\n\\boxed{A_{\\text{int,new}}\\approx 2A_{\\text{int,old}}.}\n\\]\n\nActual scaling depends on the bias conditions and device technology.",
        "format": "markdown",
        "sha256": "5a77c64a95bddf4057c2fb90b0b1717500460652d3d4b3396c70b30bd1e6bbdc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling both dimensions leaves gm approximately unchanged and, as channel length increases, approximately doubles ro and intrinsic gain. It appropriately notes the assumptions and bias dependence.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1135,
        "total_tokens": 1161,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 946,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1135,
        "total_tokens": 1161,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 946,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Its intrinsic gain approximately doubles**, assuming the same bias current and the usual long-channel saturation model.\n\nIntrinsic gain is\n\\[\nA_{\\text{int}}=g_m r_o.\n\\]\n\n- Doubling both \\(W\\) and \\(L\\) leaves \\(W/L\\) unchanged, so \\(g_m\\) stays approximately unchanged.\n- Channel-length modulation decreases roughly as \\(\\lambda\\propto1/L\\), so\n  \\[\n  r_o\\approx\\frac{1}{\\lambda I_D}\n  \\]\n  approximately doubles.\n\nTherefore, \\(A_{\\text{int}}\\) increases by about **\\(2\\times\\), or 6 dB**. The exact change depends on the bias conditions and short-channel effects.",
        "format": "markdown",
        "sha256": "07d7c89fbc10f3948bb9bf294489d7c4e603f8ff561750f7d19bec2e61583013"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the intrinsic gain as gm·ro and explains that with W/L and bias current unchanged, gm stays approximately constant while ro approximately doubles as channel length increases. The stated bias-condition caveat is appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1150,
        "total_tokens": 1176,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 989,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1150,
        "total_tokens": 1176,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 989,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**It depends on what is held constant.** For a long-channel MOSFET in saturation, using the square-law model,\n\n\\[\nI_D=\\frac12 kV_{\\text{ov}}^2,\n\\qquad\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}\n=kV_{\\text{ov}}\n=\\frac{2I_D}{V_{\\text{ov}}},\n\\]\nwhere \\(k=\\mu C_{\\text{ox}}W/L\\) and \\(V_{\\text{ov}}=V_{GS}-V_{TH}\\).\n\n- **Same transistor, fixed dimensions:** \\(k\\) is constant, so increasing overdrive increases \\(g_m\\). **Student A is correct.**\n- **Fixed drain current, comparing different device sizings:** \\(g_m=2I_D/V_{\\text{ov}}\\), so increasing overdrive decreases \\(g_m\\). **Student B is correct.**\n\nIf the question means simply increasing the gate voltage on a given transistor that remains in saturation, **A is the usual answer**. The apparent contradiction comes from treating \\(I_D\\) as constant when it actually increases with overdrive.",
        "format": "markdown",
        "sha256": "92fc8d8bdaf15d9bfcc8da6476af6f2d03ba8da78472a7ffaea27b55454b2807"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A for a fixed transistor and explains that drain current rises with overdrive; also correctly notes Student B's fixed-current condition.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1279,
        "total_tokens": 1317,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1279,
        "total_tokens": 1317,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct for the usual interpretation: increasing overdrive on the same MOSFET in saturation.** But what is held constant matters.\n\nIn the long-channel square-law model,\n\\[\nI_D=\\frac12\\mu C_{\\mathrm{ox}}\\frac WL V_{\\mathrm{OV}}^2,\n\\qquad\ng_m=\\mu C_{\\mathrm{ox}}\\frac WL V_{\\mathrm{OV}}.\n\\]\nThus, for fixed device parameters, \\(g_m\\) **increases** with overdrive.\n\nStudent B may be thinking of the equivalent expression\n\\[\ng_m=\\frac{2I_D}{V_{\\mathrm{OV}}}.\n\\]\nThis predicts a decrease **if \\(I_D\\) is held constant**, such as when comparing differently sized MOSFETs at the same current. For the same device, however, increasing overdrive also increases \\(I_D\\), so treating the numerator as constant is incorrect.\n\n**Bottom line: A for a fixed device; B can be correct for fixed-current design comparisons.**",
        "format": "markdown",
        "sha256": "c8be37b816a5185d05a8d39308718900942a5a8dccbffbf596bd4b979efb7a15"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A for a fixed device, derives that gm increases with overdrive, and explains Student B’s result applies when drain current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1397,
        "total_tokens": 1435,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1175,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1397,
        "total_tokens": 1435,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1175,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**It depends on what is held fixed.** In the usual long-channel saturation model,\n\\[\nI_D=\\frac12\\beta V_{\\text{OV}}^2,\n\\qquad\ng_m=\\beta V_{\\text{OV}}=\\frac{2I_D}{V_{\\text{OV}}},\n\\]\nwhere \\(\\beta=\\mu C_{\\text{ox}}W/L\\).\n\n- **For the same MOSFET** (fixed geometry and process parameters), **Student A is correct**: increasing overdrive increases \\(g_m\\). The drain current increases too, so you cannot treat \\(I_D\\) as constant in the last expression.\n- **At fixed drain current**, when comparing designs with different \\(W/L\\), **Student B is correct**: \\(g_m=2I_D/V_{\\text{OV}}\\) decreases as overdrive increases.\n\nSo if the question means simply increasing the gate voltage of a fixed MOSFET in saturation, the answer is **Student A**.",
        "format": "markdown",
        "sha256": "262ecdfb477f1aea52d9d5461377019dfb3219462e74af986c2f6e646dc53edc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed MOSFET: increasing overdrive also increases drain current, so gm rises. It also correctly explains that Student B’s result applies when drain current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1246,
        "total_tokens": 1284,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1246,
        "total_tokens": 1284,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**They have the same small-signal equivalent-circuit structure**, but sign conventions and parameter values must be handled consistently.\n\nIn the usual saturation-region model, both have:\n- An ideally open-circuit gate.\n- A transconductance-controlled current source.\n- An output resistance \\(r_o\\) between drain and source.\n\nDefine \\(v_{gs}=v_g-v_s\\), \\(v_{ds}=v_d-v_s\\), and \\(i_d\\) as positive **from drain to source**. Then, neglecting body effect,\n\n\\[\ni_d=g_m v_{gs}+\\frac{v_{ds}}{r_o}\n\\]\n\nworks for **both NMOS and PMOS**, with \\(g_m\\) and \\(r_o\\) positive. For a PMOS, a positive gate-voltage increment reduces its source-to-drain current, which corresponds to a positive incremental drain-to-source current.\n\nAlternatively, a PMOS model is often drawn using \\(v_{sg}\\) and a controlled current \\(g_m v_{sg}\\) directed **from source to drain**. This is completely equivalent.\n\nSo: **same model topology, possibly different drawing conventions, and generally different parameter values.**",
        "format": "markdown",
        "sha256": "96ab173315bb9edd1793032b2ef31e4b9b5fb958207107fa41e300bcdd4e632d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS and NMOS small-signal models have the same structure when polarities and sign conventions are handled consistently, as required for full credit.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2121,
        "total_tokens": 2147,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2121,
        "total_tokens": 2147,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**They have the same small-signal model structure**, but voltage/current conventions and parameter values must be handled consistently.\n\nAt low frequencies, both models include:\n- An ideally open-circuit gate.\n- A controlled current source representing transconductance \\(g_m\\).\n- An output resistance \\(r_o\\).\n- A body-effect term \\(g_{mb}\\), if needed.\n\nIf, for **both** devices, \\(i_d\\) is defined entering the drain and \\(v_{gs}=v_g-v_s\\), the same equation applies:\n\\[\ni_d=g_m v_{gs}+g_{mb}v_{bs}+\\frac{v_{ds}}{r_o},\n\\]\nwith \\(g_m\\), \\(g_{mb}\\), and \\(r_o\\) taken as positive parameters.\n\nFor a PMOS, it is also common to use \\(v_{sg}\\) instead. In that convention, the controlled source is \\(g_m v_{sg}\\), directed **from source to drain**. This is equivalent—not a different model.\n\nSo: **same equivalent-circuit form, different DC bias polarities and generally different parameter values.**",
        "format": "markdown",
        "sha256": "276638b29e85c2d95f7f44f50baadc25b8fcb44888399036d8e268530543c31b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS model has the same small-signal structure as the NMOS model, with consistent polarity conventions and device parameters. This earns full credit under the golden solution’s rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1795,
        "total_tokens": 1821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1795,
        "total_tokens": 1821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**They have the same small-signal model structure**, but polarity conventions and parameter values matter.\n\nFor example, ignoring body effect and capacitances, define:\n- \\(i_d\\) as positive from **drain to source**\n- \\(v_{gs}=v_g-v_s\\), \\(v_{ds}=v_d-v_s\\)\n\nThen **both NMOS and PMOS** satisfy\n\\[\ni_d=g_m v_{gs}+\\frac{v_{ds}}{r_o},\n\\]\nwith positive \\(g_m\\) and \\(r_o\\). Using these references, their equivalent circuits can be drawn identically: a controlled current source \\(g_m v_{gs}\\) from drain to source, in parallel with \\(r_o\\).\n\nFor a **PMOS**, it is common instead to use \\(v_{sg}\\) and current flowing from **source to drain**:\n\\[\ni_{sd}=g_m v_{sg}+\\frac{v_{sd}}{r_o}.\n\\]\nIn that convention, the controlled-current-source arrow is reversed **along with the controlling voltage polarity**.\n\nSo: **same model form, opposite DC bias polarities, and generally different numerical values of \\(g_m\\), \\(r_o\\), capacitances, etc.**",
        "format": "markdown",
        "sha256": "5fe20a918d09a91b701fe1225489fea739239f099675ecb72b645136047d6674"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that PMOS and NMOS have the same small-signal model structure and explains the polarity conventions and differing parameter values.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2221,
        "total_tokens": 2247,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2221,
        "total_tokens": 2247,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) is a **diode-connected NMOS**: its gate and drain are tied together. Thus\n\\[\nV_{GS}=V_{DS}=V_X,\\qquad I_X=I_D.\n\\]\n\nUsing the ideal square-law model,\n\\[\n\\boxed{\nI_X=\n\\begin{cases}\n0, & V_X\\le V_{TH},\\\\[2mm]\n\\dfrac12\\mu_n C_{\\mathrm{ox}}\\dfrac WL\\,(V_X-V_{TH})^2,\n& V_X>V_{TH}.\n\\end{cases}}\n\\]\n\nWhenever it is on, it is **in saturation**, since\n\\[\nV_{DS}=V_{GS}\\ge V_{GS}-V_{TH}.\n\\]\nThere is therefore no triode-region segment.\n\n```text\n I_X\n  ↑\n  │                             /\n  │                           _/\n  │                        _/\n  │                    __/\n  │_________________.-´____________→ V_X\n                   V_TH\n```\n\nThe current is zero up to \\(V_{TH}\\), then rises quadratically. This sketch neglects channel-length modulation, subthreshold current, and body-diode conduction at negative \\(V_X\\).",
        "format": "markdown",
        "sha256": "e1ce46069d24a9ce637273fbd459d10134348d316904154efb2e4833d4aadc51"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives zero current up to threshold and a quadratic rise above it, and correctly notes saturation. Negative-VX behavior is not required.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 2954,
        "total_tokens": 4160,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2693,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 2954,
        "total_tokens": 4160,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2693,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The gate and drain of \\(M_1\\) are connected, so\n\\[\nV_{GS}=V_{DS}=V_X.\n\\]\nFor \\(V_X<V_{TN}\\), the NMOS is off. Once it turns on, it is **always in saturation**, because\n\\[\nV_{DS}\\ge V_{GS}-V_{TN}.\n\\]\n\nThus, using the ideal square-law model,\n\\[\n\\boxed{\nI_X=\n\\begin{cases}\n0, & V_X\\le V_{TN},\\\\[2mm]\n\\dfrac{1}{2}\\mu_n C_{\\mathrm{ox}}\\dfrac WL\n(V_X-V_{TN})^2, & V_X>V_{TN}.\n\\end{cases}}\n\\]\n\nThe sketch is zero up to threshold, then an upward-opening parabola—there is no triode-region segment:\n\n```text\n I_X\n  ↑\n  │                              /\n  │                             /\n  │                           /\n  │                        _/\n  │                   __.-'\n  │              __.-'\n  └─────────────●──────────────────→ V_X\n               V_TN\n```\n\n*Channel-length modulation, subthreshold current, and body-diode conduction are neglected.*",
        "format": "markdown",
        "sha256": "9d8775992a8814d9255a77f97f193e511a743deee1dfafedd9f329476e8accbb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives negligible current up to threshold and a quadratic rise above it, and correctly states it operates in saturation.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 2332,
        "total_tokens": 3538,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 2332,
        "total_tokens": 3538,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) is a **diode-connected NMOS**, so\n\\[\nV_{GS}=V_{DS}=V_X.\n\\]\nWhen it turns on, it is always in saturation because\n\\[\nV_{DS}\\ge V_{GS}-V_{TN}.\n\\]\n\nUsing the ideal square-law model (neglecting leakage, body-diode conduction, and channel-length modulation),\n\\[\n\\boxed{\nI_X=\n\\begin{cases}\n0, & V_X\\le V_{TN},\\\\[2mm]\n\\dfrac12\\mu_n C_{\\mathrm{ox}}\\dfrac WL\n(V_X-V_{TN})^2, & V_X>V_{TN}.\n\\end{cases}}\n\\]\n\nThus the characteristic is zero up to the threshold voltage, then rises **parabolically**:\n\n```text\n I_X\n  ↑\n  │                            /\n  │                           /\n  │                         _/\n  │                       _/\n  │                    __/\n  │                ___/\n  │           ____/\n  └──────────●────────────────────→ V_X\n            V_TN\n```\n\nThere is **no triode-region segment**.",
        "format": "markdown",
        "sha256": "0907e22c657d9b06f3c2b762ec5a645b1537e625acb2aafe83655630caa46e25"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its saturation operation above threshold, and the zero-then-quadratic current characteristic.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 2318,
        "total_tokens": 3524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 2318,
        "total_tokens": 3524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Since \\(M_1\\) is an NMOS with its source grounded,\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\,\\text{V},\\qquad I_X=I_D.\n\\]\n\nUsing the ideal square-law model, with \\(\\beta_n=\\mu_n C_{\\mathrm{ox}}(W/L)\\),\n\\[\n\\boxed{\nI_X=\n\\begin{cases}\n0,\n& V_X\\le V_T \\quad\\text{(cutoff)},\\\\[3pt]\n\\dfrac{\\beta_n}{2}(V_X-V_T)^2,\n& V_T<V_X\\le V_T+1\\,\\text{V}\\quad\\text{(saturation)},\\\\[6pt]\n\\beta_n\\!\\left[(V_X-V_T)(1\\,\\text{V})\n-\\dfrac{(1\\,\\text{V})^2}{2}\\right],\n& V_X>V_T+1\\,\\text{V}\\quad\\text{(triode)}.\n\\end{cases}}\n\\]\n\nThus, the sketch is **zero, then quadratic, then linear**:\n\n```text\n I_X\n  ↑\n  |                                      /  Triode\n  |                                   /     (linear)\n  |                                ●\n  |                             .´ │\n  |                         _.-´   │\n  |                  __..--´       │\n  |_________________•______________│________→ V_X\n                   V_T          V_T + 1 V\n        Cutoff         Saturation\n                       (quadratic)\n```\n\nThe transition occurs when \\(V_{GS}-V_T=V_{DS}=1\\,\\text{V}\\), at\n\\[\nI_X=\\frac{\\beta_n}{2}(1\\,\\text{V})^2.\n\\]\nThe quadratic and linear portions join with the same slope.",
        "format": "markdown",
        "sha256": "b40593ce80529841bcb0558c1daa8b989b1ac33b3dfcd6603b2c323d93769c03"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, the quadratic saturation region up to V_X = V_T + 1 V, and the roughly linear triode region beyond, with the correct transition condition and current expressions.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 3415,
        "total_tokens": 4784,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3015,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 3415,
        "total_tokens": 4784,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3015,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the NMOS, \\(V_{GS}=V_X\\), \\(V_{DS}=1\\,\\text{V}\\), and \\(I_X=I_D\\). Assume threshold \\(V_T>0\\) and neglect channel-length modulation. Defining \\(\\beta_n=\\mu_n C_{\\mathrm{ox}}W/L\\),\n\n\\[\n\\boxed{\nI_X=\n\\begin{cases}\n0,\n&V_X\\le V_T \\qquad\\text{(cutoff)},\\\\[2mm]\n\\dfrac{\\beta_n}{2}(V_X-V_T)^2,\n&V_T<V_X\\le V_T+1\\,\\text{V}\\quad\\text{(saturation)},\\\\[2mm]\n\\beta_n\\!\\left[(V_X-V_T)(1\\,\\text{V})\n-\\dfrac{(1\\,\\text{V})^2}{2}\\right],\n&V_X>V_T+1\\,\\text{V}\\quad\\text{(triode)}.\n\\end{cases}}\n\\]\n\nThe qualitative sketch is:\n\n```text\n I_X\n  ↑\n  │                              /  Triode: linear\n  │                            /\n  │                          ●\n  │                        .´│\n  │                     .´   │\n  │                 _.-´     │\n  └───────────●───´──────────┼────────→ V_X\n             V_T          V_T + 1 V\n      Cutoff       Saturation:\n                   parabolic\n```\n\nThus, the current is **zero, then quadratic, then linear**. The parabola joins the straight line smoothly at \\(V_X=V_T+1\\,\\text{V}\\), where \\(V_{DS}=V_{GS}-V_T\\).",
        "format": "markdown",
        "sha256": "49e8294454f9cbb18a06ab7650fab2bc81905f3d8fdff1f314d8bc9fce3fd5fe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, the quadratic saturation-region rise up to V_X=V_T+1 V, and the roughly linear triode-region rise beyond it.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 2967,
        "total_tokens": 4336,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 2967,
        "total_tokens": 4336,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the NMOS, \\(V_{GS}=V_X\\) and \\(V_{DS}=1\\,\\text{V}\\). Assuming threshold \\(V_{TH}>0\\) and neglecting channel-length modulation, define\n\\[\n\\beta_n=\\mu_n C_{\\mathrm{ox}}\\frac WL.\n\\]\n\nThen\n\\[\n\\boxed{\nI_X=\n\\begin{cases}\n0,\n&V_X\\le V_{TH}\\qquad\\text{(cutoff)},\\\\[4pt]\n\\dfrac{\\beta_n}{2}(V_X-V_{TH})^2,\n&V_{TH}<V_X\\le V_{TH}+1\\,\\text{V}\\quad\\text{(saturation)},\\\\[6pt]\n\\beta_n\\!\\left[(V_X-V_{TH})(1\\,\\text{V})\n-\\dfrac{(1\\,\\text{V})^2}{2}\\right],\n&V_X>V_{TH}+1\\,\\text{V}\\quad\\text{(triode)}.\n\\end{cases}}\n\\]\n\nThe qualitative sketch is:\n\n```text\n I_X\n  ↑\n  │                                /  Triode: linear\n  │                              /\n  │                            ●\n  │                          .'│\n  │                       _.'  │\n  │                   _.-'     │\n  │________________.-'_________│________→ V_X\n                 V_TH      V_TH + 1 V\n       Cutoff       Saturation\n                    (quadratic)\n```\n\nThus, the current is **zero**, then rises **quadratically**, and finally rises **linearly**. The saturation-to-triode transition occurs when\n\\[\nV_{GS}-V_{TH}=V_{DS}=1\\,\\text{V}.\n\\]",
        "format": "markdown",
        "sha256": "28aeea699d12e64bd530af4646365cd1fe09cf7ea35be8c062a0682b03a48b57"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, the quadratic saturation region, and the transition to roughly linear triode current at V_X = V_TH + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 3517,
        "total_tokens": 4886,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3137,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 3517,
        "total_tokens": 4886,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3137,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not as a constant-current source in this connection.** The PMOS has its gate and drain tied to ground, making it **diode-connected**.\n\nIf the upper-terminal voltage is \\(V_X\\), then\n\\[\nV_{SG}=V_{SD}=V_X.\n\\]\nFor \\(V_X>|V_{TP}|\\), neglecting channel-length modulation,\n\\[\nI_X=\\frac{1}{2}\\mu_p C_{\\mathrm{ox}}\\frac WL\n\\left(V_X-|V_{TP}|\\right)^2.\n\\]\n\nAlthough the transistor is in saturation whenever it is on, changing \\(V_X\\) also changes \\(V_{SG}\\), so the current changes substantially. Its small-signal resistance is approximately \\(1/g_m\\), rather than the high output resistance desired for a current source.",
        "format": "markdown",
        "sha256": "38858ebc20ec728becca2cd2a3a245c13a1b985a60e1175ad97a1b0ce6e2c983"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a diode-connected PMOS, explains that its current varies with terminal voltage, and notes its low small-signal resistance of about 1/gm.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 1730,
        "total_tokens": 2230,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 1730,
        "total_tokens": 2230,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not as a constant-current source.** The upper terminal is the PMOS source, while its gate and drain are both grounded, making it **diode-connected**.\n\nIf the upper-terminal voltage is \\(V_X\\), then\n\\[\nV_{SG}=V_{SD}=V_X.\n\\]\nWhen on, the transistor is in saturation, but its current is approximately\n\\[\nI_X=\\frac12\\mu_p C_{\\mathrm{ox}}\\frac WL\n\\left(V_X-|V_{TP}|\\right)^2,\n\\]\nneglecting channel-length modulation.\n\nThus, changing the terminal voltage also changes the gate–source voltage and hence the current. The device behaves as a nonlinear resistance, not a constant-current source.",
        "format": "markdown",
        "sha256": "7f50bb0db82f6e2eba558e3e105e0be1caa4958125a1c7f5bdbba5619e34aa8d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the PMOS as diode-connected and explains that its current varies with terminal voltage, so it is not a constant-current source. It does not explicitly identify the key low small-signal impedance (about 1/gm) required for full credit.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 2229,
        "total_tokens": 2729,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 2229,
        "total_tokens": 2729,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not as a constant-current source at the indicated terminal.** \\(M_1\\) is a diode-connected PMOS: its gate and drain are both grounded, and the upper terminal is its source.\n\nIf the upper-node voltage is \\(V_X\\), then\n\\[\nV_{SG}=V_{SD}=V_X.\n\\]\nAlthough the transistor is in saturation whenever it is on, its current is\n\\[\nI_X \\approx \\frac12\\mu_p C_{\\mathrm{ox}}\\frac WL\n\\left(V_X-|V_{TP}|\\right)^2,\n\\qquad V_X>|V_{TP}|,\n\\]\nignoring channel-length modulation.\n\nThus, changing the terminal voltage changes \\(V_{SG}\\) and hence the current substantially. **Saturation alone is not enough:** a MOS current source normally has a fixed gate–source voltage and takes its output at the drain.",
        "format": "markdown",
        "sha256": "72ab90ddcb3de4a22b1b17add5bd81abc259358494523d8575632a650637b8fc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the diode-connected PMOS and explains why its current depends on terminal voltage, but omits the key low-output-impedance point (about 1/gm) required for full credit.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 1745,
        "total_tokens": 2245,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 1745,
        "total_tokens": 2245,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) is a **PMOS transistor**. The circuit is an **inverting common-source amplifier with source degeneration** provided by \\(R_S\\).\n\nWith no values or bias voltage specified, the analysis is symbolic. Assume negligible body effect.\n\n## 1. DC operating point\n\nDefine \\(I_D>0\\) flowing from \\(V_{DD}\\) through \\(R_S\\), \\(M_1\\), and \\(R_D\\). Then\n\\[\nV_S=V_{DD}-I_DR_S,\\qquad V_{\\text{out}}=I_DR_D.\n\\]\n\nLet \\(V_T=|V_{TP}|\\) and \\(\\beta_p=\\mu_pC_{\\text{ox}}W/L\\). Neglecting channel-length modulation, operation in saturation gives\n\\[\nI_D=\\frac{\\beta_p}{2}(V_{SG}-V_T)^2,\n\\]\nso the bias current satisfies\n\\[\n\\boxed{\nI_D=\\frac{\\beta_p}{2}\n\\left(V_{DD}-V_{\\text{in}}-I_DR_S-V_T\\right)^2\n}\n\\]\nwith a positive overdrive \\(V_{SG}-V_T\\).\n\nThe saturation condition is\n\\[\nV_{SD}\\ge V_{SG}-V_T,\n\\]\nwhich simplifies to\n\\[\n\\boxed{V_{\\text{out}}\\le V_{\\text{in}}+V_T.}\n\\]\n\nFor \\(V_{\\text{in}}\\ge V_{DD}-V_T\\), the transistor is cut off:\n\\[\nI_D\\simeq0,\\qquad V_{\\text{out}}\\simeq0.\n\\]\nIf the transistor is on but the saturation condition fails, it operates in triode and the saturation equations do not apply.\n\n## 2. Small-signal voltage gain\n\nAssume \\(M_1\\) is biased in saturation and initially neglect its output resistance \\(r_o\\). The supply is AC ground.\n\nTaking the incremental current \\(i_d\\) positive from source to drain,\n\\[\nv_s=-i_dR_S,\\qquad v_{\\text{out}}=i_dR_D.\n\\]\nFor the PMOS,\n\\[\ni_d=g_m(v_s-v_{\\text{in}}).\n\\]\nSubstitution gives\n\\[\ni_d(1+g_mR_S)=-g_mv_{\\text{in}},\n\\]\nand therefore\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-\\frac{g_mR_D}{1+g_mR_S}\n}.\n\\]\n\nHere \\(g_m\\) is the positive transconductance magnitude:\n\\[\ng_m=\\frac{2I_D}{V_{SG}-V_T}.\n\\]\n\nImportant limits are\n\\[\nR_S=0:\\quad A_v=-g_mR_D,\n\\]\nand\n\\[\ng_mR_S\\gg1:\\quad\n\\boxed{A_v\\approx-\\frac{R_D}{R_S}}.\n\\]\n\nThus, strong source degeneration makes the gain mainly a resistor ratio.\n\n### Including finite \\(r_o\\)\n\nStill neglecting body effect,\n\\[\n\\boxed{\nA_v=\n-\\frac{g_mR_D}\n{1+g_mR_S+(R_D+R_S)/r_o}\n}.\n\\]\n\n## 3. Input and output resistances\n\nAt low frequencies, the MOS gate draws essentially no current:\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty.}\n\\]\n\nWith the input AC-grounded,\n\\[\n\\boxed{\nR_{\\text{out}}\n=R_D\\parallel\\left[r_o+(1+g_mr_o)R_S\\right].\n}\n\\]\nIf \\(r_o\\) is neglected, \\(R_{\\text{out}}\\approx R_D\\).\n\n**Physical interpretation:** Increasing \\(V_{\\text{in}}\\) weakens the PMOS, reducing \\(I_D\\) and therefore reducing \\(V_{\\text{out}}=I_DR_D\\). This explains the negative gain. The source resistor supplies local negative feedback, reducing gain while improving linearity and bias stability.",
        "format": "markdown",
        "sha256": "101e26635adb746064eb6666f59a09674d573b8643c5ff136683f941ffcb009a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a PMOS common-source stage with source degeneration and gives the inverting gain \\(-g_mR_D/(1+g_mR_S)\\). The additional DC, finite-\\(r_o\\), and resistance analyses are consistent with the stated assumptions.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 4884,
        "total_tokens": 6310,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4010,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 4884,
        "total_tokens": 6310,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4010,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **PMOS common-source amplifier with source degeneration**. \\(R_S\\) provides negative feedback, and \\(R_D\\) converts the drain-current changes into an output voltage.\n\nAssume low-frequency operation and neglect body effect.\n\n## 1. DC operating point\n\nDefine \\(I_D>0\\) as the current flowing from \\(V_{DD}\\) through \\(R_S\\), \\(M_1\\), and \\(R_D\\). Then\n\\[\nV_S=V_{DD}-I_DR_S,\\qquad V_{\\text{out}}=I_DR_D.\n\\]\n\nFor the PMOS,\n\\[\nV_{SG}=V_S-V_{\\text{in}},\\qquad\nV_{SD}=V_S-V_{\\text{out}}.\n\\]\n\nIgnoring channel-length modulation, the saturation-region current is\n\\[\nI_D=\\frac{\\beta_p}{2}(V_{SG}-|V_{TP}|)^2,\n\\qquad\n\\beta_p=\\mu_pC_{\\text{ox}}\\frac WL.\n\\]\nThus the bias current satisfies\n\\[\n\\boxed{\nI_D=\\frac{\\beta_p}{2}\n\\left(V_{DD}-I_DR_S-V_{\\text{in}}-|V_{TP}|\\right)^2\n}\n\\]\nwith a positive overdrive voltage.\n\nThe operating-region conditions are:\n\n- **Cutoff:** \\(V_{\\text{in}}\\ge V_{DD}-|V_{TP}|\\), giving approximately \\(I_D=0\\) and \\(V_{\\text{out}}=0\\).\n- **Saturation:** \\(V_{SG}>|V_{TP}|\\) and\n  \\[\n  V_{SD}\\ge V_{SG}-|V_{TP}|\n  \\quad\\Longleftrightarrow\\quad\n  \\boxed{V_{\\text{out}}\\le V_{\\text{in}}+|V_{TP}|.}\n  \\]\n- If the device is on but the last inequality is violated, it operates in **triode**, and the saturation model no longer applies.\n\n## 2. Small-signal voltage gain\n\nFirst neglect transistor output resistance, \\(r_o\\to\\infty\\). The supply is an AC ground. If \\(i_d\\) is the incremental source-to-drain current,\n\\[\nv_s=-i_dR_S,\\qquad\ni_d=g_m(v_s-v_{\\text{in}}),\\qquad\nv_{\\text{out}}=i_dR_D.\n\\]\n\nCombining these gives\n\\[\ni_d(1+g_mR_S)=-g_mv_{\\text{in}},\n\\]\nso\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-\\frac{g_mR_D}{1+g_mR_S}\n}\n\\]\nwhere, at the bias point,\n\\[\ng_m=\\beta_pV_{\\text{OV}}\n=\\frac{2I_D}{V_{\\text{OV}}},\n\\qquad\nV_{\\text{OV}}=V_{SG}-|V_{TP}|.\n\\]\n\nThe negative sign means the stage is **inverting**: increasing the gate voltage reduces PMOS current and therefore reduces the output voltage.\n\nFor strong source degeneration,\n\\[\ng_mR_S\\gg1\n\\quad\\Rightarrow\\quad\n\\boxed{A_v\\approx-\\frac{R_D}{R_S}.}\n\\]\n\n## 3. Input and output resistances\n\nThe ideal MOS gate draws no current, so\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty}\n\\]\nat low frequencies.\n\nIncluding finite transistor output resistance \\(r_o\\), the gain becomes\n\\[\n\\boxed{\nA_v=\n-\\frac{g_mR_D}\n{1+g_mR_S+\\dfrac{R_S+R_D}{r_o}}\n}\n\\]\nand, with the input AC-grounded,\n\\[\n\\boxed{\nR_{\\text{out}}\n=\nR_D\\parallel\n\\left[r_o+R_S(1+g_mr_o)\\right].\n}\n\\]\nThus, when \\(r_o\\) is large, \\(R_{\\text{out}}\\approx R_D\\).\n\nOverall, \\(R_S\\) reduces voltage gain but improves linearity and makes the gain less sensitive to transistor parameters.",
        "format": "markdown",
        "sha256": "013b19625de79e66fd7b49eb365eb07cd08602b7b2da47c29fe66ae99711db76"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain \u0012gm RD/(1 + gm RS). The added operating-point and finite-ro analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 4021,
        "total_tokens": 5447,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 4021,
        "total_tokens": 5447,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **PMOS common-source amplifier with source degeneration**: \\(R_S\\) provides negative feedback, and the output is taken at the drain.\n\nAssume negligible body effect and no external load.\n\n## 1. DC operating point\n\nLet \\(I_Q>0\\) denote the current flowing from \\(V_{DD}\\), through \\(R_S\\), the PMOS, and \\(R_D\\) to ground. Then\n\\[\nV_{SQ}=V_{DD}-I_QR_S,\\qquad\nV_{\\text{out},Q}=I_QR_D.\n\\]\n\nThus,\n\\[\nV_{SG,Q}=V_{DD}-I_QR_S-V_{\\text{in},Q},\n\\]\n\\[\nV_{SD,Q}=V_{DD}-I_Q(R_S+R_D).\n\\]\n\nIgnoring channel-length modulation, the saturation-region current is\n\\[\n\\boxed{\nI_Q=\\frac{\\beta_p}{2}\n\\left(V_{DD}-I_QR_S-V_{\\text{in},Q}-|V_{TP}|\\right)^2\n}\n\\]\nwhere \\(\\beta_p=\\mu_pC_{\\text{ox}}W/L\\). This equation determines the bias current.\n\nFor saturation,\n\\[\nV_{SG,Q}>|V_{TP}|,\\qquad\nV_{SD,Q}\\ge V_{SG,Q}-|V_{TP}|.\n\\]\nThe second condition can also be written\n\\[\n\\boxed{V_{\\text{out},Q}\\le V_{\\text{in},Q}+|V_{TP}|.}\n\\]\n\nIf \\(V_{\\text{in},Q}\\ge V_{DD}-|V_{TP}|\\), the transistor is ideally off, giving \\(I_Q=0\\) and \\(V_{\\text{out},Q}=0\\).\n\n## 2. Small-signal voltage gain\n\nAt midband, \\(V_{DD}\\) is AC ground. First neglect transistor output resistance \\(r_o\\). Define \\(i_d\\) as the incremental source-to-drain current:\n\\[\nv_s=-i_dR_S,\\qquad v_{\\text{out}}=i_dR_D,\n\\]\nand\n\\[\ni_d=g_m(v_s-v_{\\text{in}}).\n\\]\n\nSubstitution gives\n\\[\ni_d(1+g_mR_S)=-g_mv_{\\text{in}},\n\\]\nso\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-\\frac{g_mR_D}{1+g_mR_S}\n=-\\frac{R_D}{R_S+1/g_m}.\n}\n\\]\n\nHere,\n\\[\ng_m=\\frac{2I_Q}{V_{SG,Q}-|V_{TP}|}.\n\\]\n\nFor strong source degeneration, \\(g_mR_S\\gg1\\),\n\\[\n\\boxed{A_v\\approx-\\frac{R_D}{R_S}.}\n\\]\n\nThe negative sign indicates inversion: increasing the gate voltage reduces the PMOS current, lowering the voltage across \\(R_D\\).\n\n## 3. Including finite \\(r_o\\)\n\nWith channel-length modulation included in the small-signal model,\n\\[\n\\boxed{\nA_v=-\\frac{g_mR_D}\n{1+g_mR_S+\\dfrac{R_D+R_S}{r_o}}.\n}\n\\]\n\nThe input and output resistances are\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty}\n\\]\nand, with the input AC-grounded,\n\\[\n\\boxed{\nR_{\\text{out}}\n=R_D\\parallel\\left[r_o+(1+g_mr_o)R_S\\right].\n}\n\\]\nFor \\(r_o\\to\\infty\\), \\(R_{\\text{out}}\\approx R_D\\).\n\nOverall, \\(R_S\\) reduces gain but improves linearity and makes the gain less sensitive to transistor parameters. Numerical results require the component values, device parameters, and DC input voltage.",
        "format": "markdown",
        "sha256": "99472481f53c92ef7e2b9d8e6e091ef23d632d543fbd85915fc14022c97edc60"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS). The additional DC, finite-ro, and output-resistance analysis is consistent with the circuit.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 4471,
        "total_tokens": 5897,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 4471,
        "total_tokens": 5897,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS source follower**, also called a **common-drain amplifier**. The input is applied to the gate, and the output is taken from the source.\n\nAssume an enhancement-mode NMOS, initially neglecting body effect and channel-length modulation. Define\n\\[\n\\beta=\\mu_n C_{\\mathrm{ox}}\\frac WL\n\\]\nand let the threshold voltage be \\(V_T\\).\n\n## 1. DC operating point\n\nThe circuit relations are\n\\[\nV_{GS}=V_{\\text{in}}-V_{\\text{out}},\\qquad\nV_{DS}=V_{DD}-V_{\\text{out}},\\qquad\nI_D=\\frac{V_{\\text{out}}}{R_S}.\n\\]\n\n- **If \\(V_{\\text{in}}\\le V_T\\):** the transistor is off, so\n  \\[\n  \\boxed{V_{\\text{out}}=0,\\qquad I_D=0.}\n  \\]\n\n- **If the transistor is on and saturated:**\n  \\[\n  I_D=\\frac{\\beta}{2}(V_{GS}-V_T)^2,\n  \\]\n  giving the DC transfer relation\n  \\[\n  \\boxed{\\frac{V_{\\text{out}}}{R_S}\n  =\\frac{\\beta}{2}\n  (V_{\\text{in}}-V_{\\text{out}}-V_T)^2.}\n  \\]\n\n  Solving for the physically valid output,\n  \\[\n  V_{\\text{out}}\n  =V_{\\text{in}}-V_T-\n  \\frac{\\sqrt{1+2\\beta R_S(V_{\\text{in}}-V_T)}-1}{\\beta R_S}.\n  \\]\n\nSaturation requires\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\quad\\Longrightarrow\\quad\n\\boxed{V_{\\text{in}}\\le V_{DD}+V_T.}\n\\]\nThus, for the usual input range \\(0\\le V_{\\text{in}}\\le V_{DD}\\), the transistor is saturated whenever it is on.\n\nThe output follows the input with a downward level shift:\n\\[\nV_{\\text{out}}=V_{\\text{in}}-V_{GS}.\n\\]\nThe shift is **not exactly \\(V_T\\)**; additional gate overdrive is needed to supply current through \\(R_S\\).\n\n## 2. Small-signal voltage gain\n\nAt a chosen bias point, \\(V_{DD}\\) is AC ground. Applying KCL at the source,\n\\[\n\\frac{v_{\\text{out}}}{R_S}\n=g_m(v_{\\text{in}}-v_{\\text{out}}).\n\\]\n\nTherefore,\n\\[\n\\boxed{A_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_mR_S}{1+g_mR_S}.}\n\\]\n\nThe gain is **positive and less than unity**, approaching unity when \\(g_mR_S\\gg1\\). Here,\n\\[\ng_m=\\beta(V_{GS}-V_T)=\\sqrt{2\\beta I_D}.\n\\]\n\n## 3. Input and output resistance\n\nAt low frequencies, the ideal MOS gate draws no current:\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty.}\n\\]\n\nWith the input AC-grounded,\n\\[\n\\boxed{R_{\\text{out}}\\approx R_S\\parallel\\frac{1}{g_m}.}\n\\]\n\nIncluding finite transistor output resistance \\(r_o\\) and body transconductance \\(g_{mb}\\) for an AC-grounded body,\n\\[\nA_v=\\frac{g_m}{g_m+g_{mb}+1/r_o+1/R_S},\n\\qquad\nR_{\\text{out}}=\\frac{1}{g_m+g_{mb}+1/r_o+1/R_S}.\n\\]\n\n**Overall:** this stage is a non-inverting **voltage buffer and level shifter**, offering high input resistance and relatively low output resistance rather than voltage gain greater than one.",
        "format": "markdown",
        "sha256": "7b4f2be2f220c81d8d33da465bd3ce06a081d0bec16f0238b04d5f322564e245"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain as gm·RS/(1 + gm·RS). The additional operating-point and resistance analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 3971,
        "total_tokens": 5120,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 3971,
        "total_tokens": 5120,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS source follower**, also called a **common-drain amplifier**. The gate is the input, the source is the output, and the drain is connected to the fixed supply \\(V_{DD}\\).\n\n## 1. DC operating point\n\nInitially neglect body effect and channel-length modulation. Define\n\\[\nk_n=\\mu_n C_{\\mathrm{ox}}\\frac WL.\n\\]\n\nThe circuit gives\n\\[\nV_{GS}=V_{\\mathrm{in}}-V_{\\mathrm{out}},\\qquad\nV_{DS}=V_{DD}-V_{\\mathrm{out}},\\qquad\nI_D=\\frac{V_{\\mathrm{out}}}{R_S}.\n\\]\n\n- **If \\(V_{\\mathrm{in}}\\le V_T\\):** the transistor is off, so\n  \\[\n  I_D\\approx0,\\qquad V_{\\mathrm{out}}\\approx0.\n  \\]\n\n- **If \\(V_{\\mathrm{in}}>V_T\\)** and the transistor is saturated:\n  \\[\n  I_D=\\frac{k_n}{2}(V_{\\mathrm{in}}-V_{\\mathrm{out}}-V_T)^2.\n  \\]\n  Hence the bias point satisfies\n  \\[\n  \\boxed{\\frac{V_{\\mathrm{out}}}{R_S}\n  =\\frac{k_n}{2}(V_{\\mathrm{in}}-V_{\\mathrm{out}}-V_T)^2}.\n  \\]\n\nFor \\(\\Delta=V_{\\mathrm{in}}-V_T>0\\), the physical solution is\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=\\Delta-\\frac{\\sqrt{1+2k_nR_S\\Delta}-1}{k_nR_S}\n}.\n\\]\n\nThe saturation condition is\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\quad\\Longrightarrow\\quad\n\\boxed{V_{\\mathrm{in}}\\le V_{DD}+V_T}.\n\\]\nThus, for the usual input range \\(0\\le V_{\\mathrm{in}}\\le V_{DD}\\), the enhancement NMOS is saturated whenever it is on.\n\nImportantly, the DC output is below the input by the full gate-source voltage:\n\\[\nV_{\\mathrm{out}}=V_{\\mathrm{in}}-V_{GS}\n=V_{\\mathrm{in}}-V_T-V_{\\mathrm{OV}},\n\\]\nnot just by \\(V_T\\).\n\n## 2. Small-signal voltage gain\n\nAt a conducting bias point,\n\\[\ng_m=k_nV_{\\mathrm{OV}}=\\frac{2I_D}{V_{\\mathrm{OV}}}.\n\\]\n\nSince \\(V_{DD}\\) is an AC ground,\n\\[\nv_{gs}=v_{\\mathrm{in}}-v_{\\mathrm{out}}.\n\\]\nApplying KCL at the source:\n\\[\ng_m(v_{\\mathrm{in}}-v_{\\mathrm{out}})\n=\\frac{v_{\\mathrm{out}}}{R_S}.\n\\]\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=\\frac{g_mR_S}{1+g_mR_S}\n}.\n\\]\n\nThe gain is **positive and less than unity**, approaching \\(+1\\) when \\(g_mR_S\\gg1\\). A rising output reduces \\(V_{GS}\\), providing local negative feedback.\n\n## 3. Input and output resistances\n\nAt low frequencies, the insulated gate draws essentially no current:\n\\[\n\\boxed{R_{\\mathrm{in}}\\approx\\infty}.\n\\]\n\nWith the input held at AC ground, the output resistance is\n\\[\n\\boxed{R_{\\mathrm{out}}=R_S\\parallel\\frac1{g_m}}.\n\\]\n\nIncluding finite transistor output resistance \\(r_o\\) and body-effect transconductance \\(g_{mb}\\), these become\n\\[\n\\boxed{\nA_v=\\frac{g_m}{g_m+g_{mb}+1/r_o+1/R_S}\n},\n\\]\n\\[\n\\boxed{\nR_{\\mathrm{out}}=\n\\frac{1}{g_m+g_{mb}+1/r_o+1/R_S}\n}.\n\\]\nHere \\(g_{mb}=0\\) if the body is tied to the source; with a grounded body, the DC threshold also increases as the source voltage rises.\n\n**Overall:** the circuit is a voltage buffer, offering high input resistance, relatively low output resistance, and a noninverting gain near—but below—unity.",
        "format": "markdown",
        "sha256": "d9704ce0d73166d915f645050254a242d7a61bf952c9bb8388fee4415376f769"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS source follower and gives its positive, less-than-unity gain, \\(g_mR_S/(1+g_mR_S)\\). The additional operating-point and resistance analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 5502,
        "total_tokens": 6651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4549,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 5502,
        "total_tokens": 6651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4549,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS source follower**, also called a **common-drain amplifier**. The input drives the gate, and the output is taken from the source.\n\nAssume an enhancement-mode NMOS and initially neglect body effect and channel-length modulation.\n\n## 1. DC operating point\n\nThe terminal voltages and current satisfy\n\\[\nV_{GS}=V_{\\text{in}}-V_{\\text{out}},\\qquad\nV_{DS}=V_{DD}-V_{\\text{out}},\\qquad\nI_D=\\frac{V_{\\text{out}}}{R_S}.\n\\]\n\n### Transistor off\nIf \\(V_{\\text{in}}\\le V_T\\), the transistor is off, so\n\\[\n\\boxed{I_D=0,\\qquad V_{\\text{out}}=0.}\n\\]\n\n### Transistor on and saturated\nDefine\n\\[\nk_n=\\mu_n C_{\\text{ox}}\\frac WL.\n\\]\nUsing the square-law model,\n\\[\n\\frac{V_{\\text{out}}}{R_S}\n=\\frac{k_n}{2}\\left(V_{\\text{in}}-V_{\\text{out}}-V_T\\right)^2.\n\\]\n\nThe physically valid solution is\n\\[\n\\boxed{\nV_{\\text{out}}\n=V_{\\text{in}}-V_T\n-\\frac{\\sqrt{1+2k_nR_S(V_{\\text{in}}-V_T)}-1}{k_nR_S}.\n}\n\\]\n\nSaturation requires\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\quad\\Longrightarrow\\quad\n\\boxed{V_{\\text{in}}\\le V_{DD}+V_T.}\n\\]\nThus, for the usual input range \\(0\\le V_{\\text{in}}\\le V_{DD}\\), the transistor is saturated whenever it conducts.\n\nIf \\(V_{\\text{in}}>V_{DD}+V_T\\), it enters the triode region, where instead\n\\[\n\\frac{V_{\\text{out}}}{R_S}\n=k_n\\!\\left[\n(V_{\\text{in}}-V_{\\text{out}}-V_T)(V_{DD}-V_{\\text{out}})\n-\\frac{(V_{DD}-V_{\\text{out}})^2}{2}\n\\right].\n\\]\n\n## 2. Small-signal voltage gain\n\nAround a conducting, saturated bias point, \\(V_{DD}\\) is AC ground. Therefore,\n\\[\n\\frac{v_{\\text{out}}}{R_S}\n=g_m(v_{\\text{in}}-v_{\\text{out}}),\n\\]\ngiving\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_mR_S}{1+g_mR_S}\n}\n\\]\nwith\n\\[\ng_m=k_n(V_{GS}-V_T)=\\sqrt{2k_nI_D}.\n\\]\n\nThe gain is **positive and less than one**. For \\(g_mR_S\\gg1\\), the output closely follows changes in the input.\n\n## 3. Input/output resistance and practical behavior\n\nIgnoring gate leakage,\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty.}\n\\]\n\nWith the input AC-grounded,\n\\[\n\\boxed{R_{\\text{out}}\\approx R_S\\parallel\\frac1{g_m}.}\n\\]\n\nIf finite transistor output resistance \\(r_o\\) and body effect are included, with the bulk at AC ground,\n\\[\nA_v=\\frac{g_m}{g_m+g_{mb}+1/r_o+1/R_S},\n\\qquad\nR_{\\text{out}}=\\frac{1}{g_m+g_{mb}+1/r_o+1/R_S}.\n\\]\n\n**Overall:** the circuit is a noninverting voltage buffer with high input resistance and relatively low output resistance. Its DC output is below the input by \\(V_{GS}=V_T+V_{\\text{OV}}\\), **not merely by \\(V_T\\)**, so it cannot provide rail-to-rail output when the gate input is limited to \\(V_{DD}\\).",
        "format": "markdown",
        "sha256": "708cacb6fd4c717404b8846ab076d3fb3198a6dfe893669a1eae7fc677fce189"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, gmRS/(1+gmRS). The additional analysis is supplementary.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 5025,
        "total_tokens": 6174,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 5025,
        "total_tokens": 6174,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit configuration\n\nThis is a **common-gate NMOS stage**:\n\n- \\(V_{\\text{in}}\\) is applied to the **source**.\n- \\(V_{\\text{out}}\\) is taken from the **drain**.\n- The gate is fixed at \\(V_{DD}\\), so it is at **AC ground**.\n\nAssume an enhancement NMOS with threshold \\(V_T>0\\), and initially neglect body effect and channel-length modulation. Define\n\\[\n\\beta=\\mu_n C_{\\text{ox}}\\frac WL.\n\\]\n\n## 2. DC operation\n\nThe transistor voltages and load current satisfy\n\\[\nV_{GS}=V_{DD}-V_{\\text{in}},\\qquad\nV_{DS}=V_{\\text{out}}-V_{\\text{in}},\n\\]\n\\[\nI_D=\\frac{V_{DD}-V_{\\text{out}}}{R_D}.\n\\]\n\n### Cutoff\nIf\n\\[\nV_{\\text{in}}\\ge V_{DD}-V_T,\n\\]\nthen \\(V_{GS}\\le V_T\\), giving\n\\[\n\\boxed{I_D\\approx0,\\qquad V_{\\text{out}}\\approx V_{DD}.}\n\\]\n\n### Saturation\nFor an on transistor in saturation,\n\\[\nI_D=\\frac{\\beta}{2}(V_{DD}-V_{\\text{in}}-V_T)^2.\n\\]\nTherefore,\n\\[\n\\boxed{\nV_{\\text{out}}\n=V_{DD}-\\frac{\\beta R_D}{2}\n(V_{DD}-V_{\\text{in}}-V_T)^2.\n}\n\\]\n\nThis expression is valid only when\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\quad\\Longrightarrow\\quad\n\\boxed{V_{\\text{out}}\\ge V_{DD}-V_T.}\n\\]\nEquivalently,\n\\[\n\\boxed{I_D R_D\\le V_T.}\n\\]\n\nThus, **tying the gate to \\(V_{DD}\\) restricts the saturated output voltage to within one threshold voltage of the supply**. Saturation is not guaranteed merely because the transistor is on.\n\n### Triode region\nIf the transistor is on but \\(V_{\\text{out}}<V_{DD}-V_T\\), its operating point instead satisfies\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n=\n\\beta\\left[\n(V_{DD}-V_{\\text{in}}-V_T)(V_{\\text{out}}-V_{\\text{in}})\n-\\frac{(V_{\\text{out}}-V_{\\text{in}})^2}{2}\n\\right].\n\\]\n\n## 3. Small-signal operation\n\nAround a saturated bias point,\n\\[\ng_m=\\beta(V_{GS,Q}-V_T)\n=\\frac{2I_{D,Q}}{V_{GS,Q}-V_T}.\n\\]\n\nBecause the gate is AC-grounded,\n\\[\nv_{gs}=-v_{\\text{in}},\n\\qquad\ni_d=-g_m v_{\\text{in}}.\n\\]\nConsequently,\n\\[\nv_{\\text{out}}=-i_dR_D=g_mR_Dv_{\\text{in}},\n\\]\nso\n\\[\n\\boxed{A_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}=+g_mR_D.}\n\\]\n\nThe stage is **non-inverting**: increasing the source voltage reduces \\(V_{GS}\\) and \\(I_D\\), reducing the drop across \\(R_D\\) and raising \\(V_{\\text{out}}\\).\n\nThe approximate impedances are\n\\[\n\\boxed{R_{\\text{in}}\\approx\\frac1{g_m},\\qquad\nR_{\\text{out}}\\approx R_D.}\n\\]\n\nIf finite transistor output resistance \\(r_o\\) is included, the more exact results are\n\\[\n\\boxed{\nA_v=\\left(g_m+\\frac1{r_o}\\right)(R_D\\parallel r_o),\n}\n\\]\n\\[\n\\boxed{\nR_{\\text{in}}=\\frac{r_o+R_D}{1+g_mr_o},\n\\qquad\nR_{\\text{out}}=R_D\\parallel r_o,\n}\n\\]\nwhere the output resistance is measured with the ideal input voltage source AC-grounded. Numerical results require the component values, transistor parameters, and DC input bias.",
        "format": "markdown",
        "sha256": "d7e07460ea067b2ef84a1db46d82cf4827d28efd3f8fb217408400352e69a8a4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology and source input, derives the non-inverting gain and approximately 1/gm input resistance, and gives consistent finite-ro results. The additional DC-region analysis is also sound under its stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 7158,
        "total_tokens": 8274,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 7158,
        "total_tokens": 8274,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit configuration\n\n\\(M_1\\) is an **NMOS common-gate stage**:\n\n- Input: source, \\(V_{\\text{in}}\\)\n- Output: drain, \\(V_{\\text{out}}\\)\n- Gate: fixed at \\(V_{DD}\\), hence at AC ground for small signals\n\nAssume an enhancement-mode device, neglect body effect and channel-length modulation, and define\n\\[\n\\beta=\\mu_n C_{\\text{ox}}\\frac WL,\\qquad V_T=V_{TN}.\n\\]\n\n## 2. DC operation\n\nThe terminal voltages and load relation are\n\\[\nV_{GS}=V_{DD}-V_{\\text{in}},\\qquad\nV_{DS}=V_{\\text{out}}-V_{\\text{in}},\n\\]\n\\[\nI_D=\\frac{V_{DD}-V_{\\text{out}}}{R_D}.\n\\]\n\n### Cutoff\n\nIf\n\\[\nV_{\\text{in}}\\ge V_{DD}-V_T,\n\\]\nthen \\(V_{GS}\\le V_T\\), so\n\\[\n\\boxed{I_D=0,\\qquad V_{\\text{out}}=V_{DD}.}\n\\]\n\n### Saturation\n\nFor an on transistor,\n\\[\nI_D=\\frac{\\beta}{2}(V_{DD}-V_{\\text{in}}-V_T)^2,\n\\]\nand therefore\n\\[\n\\boxed{\nV_{\\text{out}}\n=V_{DD}-\\frac{\\beta R_D}{2}\n(V_{DD}-V_{\\text{in}}-V_T)^2.\n}\n\\]\n\nHowever, saturation requires\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\quad\\Longrightarrow\\quad\n\\boxed{V_{\\text{out}}\\ge V_{DD}-V_T.}\n\\]\n\nEquivalently, the saturation input range is\n\\[\nV_{DD}-V_T-\\sqrt{\\frac{2V_T}{\\beta R_D}}\n\\le V_{\\text{in}}<V_{DD}-V_T.\n\\]\n\nThus, **while saturated, the output must remain within \\(V_T\\) of the positive supply**.\n\n### Triode region\n\nIf the input is lowered enough that \\(V_{\\text{out}}<V_{DD}-V_T\\), the transistor enters triode. The output is then determined by\n\\[\n\\boxed{\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n=\n\\beta\\left[\n(V_{DD}-V_{\\text{in}}-V_T)(V_{\\text{out}}-V_{\\text{in}})\n-\\frac{(V_{\\text{out}}-V_{\\text{in}})^2}{2}\n\\right].\n}\n\\]\nThe saturation transfer equation must not be used in this region.\n\n## 3. Small-signal behavior in saturation\n\nBecause the gate is at AC ground,\n\\[\nv_{gs}=-v_{\\text{in}},\n\\qquad\ni_d=g_m v_{gs}=-g_m v_{\\text{in}}.\n\\]\nSince \\(v_{\\text{out}}=-i_dR_D\\),\n\\[\n\\boxed{A_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}=+g_mR_D,}\n\\]\nwhere\n\\[\ng_m=\\beta(V_{DD}-V_{\\text{in},Q}-V_T)\n=\\sqrt{2\\beta I_{D,Q}}.\n\\]\n\nUnder the same assumptions,\n\\[\n\\boxed{R_{\\text{in}}\\approx\\frac1{g_m},\\qquad R_{\\text{out}}\\approx R_D.}\n\\]\n\n**Interpretation:** increasing \\(V_{\\text{in}}\\) reduces \\(V_{GS}\\) and \\(I_D\\), reducing the drop across \\(R_D\\), so \\(V_{\\text{out}}\\) rises. The stage is therefore **noninverting**, with relatively low input resistance.",
        "format": "markdown",
        "sha256": "e00bb3c045fbbe607ca8a64f6751c79973871473c1868551cb0bfa9f97617129"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology, source input, AC-grounded gate, and drain output. It gives the correct noninverting gain and approximate input resistance; the additional DC-region analysis is consistent with its stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 8924,
        "total_tokens": 10040,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8081,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 8924,
        "total_tokens": 10040,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8081,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS common-gate stage**: the input is applied to the source, the output is taken from the drain, and the gate is connected to \\(V_{DD}\\), which is AC ground for an ideal supply.\n\nAssume a long-channel MOSFET, initially neglecting body effect and channel-length modulation. Define\n\\[\n\\beta_n=\\mu_n C_{\\mathrm{ox}}\\frac WL.\n\\]\n\n## 1. DC operation\n\nThe terminal voltages and load current satisfy\n\\[\nV_{GS}=V_{DD}-V_{\\mathrm{in}},\\qquad\nV_{DS}=V_{\\mathrm{out}}-V_{\\mathrm{in}},\n\\]\n\\[\nI_D=\\frac{V_{DD}-V_{\\mathrm{out}}}{R_D}.\n\\]\n\n### Cutoff\nIf\n\\[\nV_{\\mathrm{in}}\\ge V_{DD}-V_T,\n\\]\nthen \\(V_{GS}\\le V_T\\), so ideally\n\\[\n\\boxed{I_D=0,\\qquad V_{\\mathrm{out}}=V_{DD}}.\n\\]\n\n### Saturation\nFor \\(V_{GS}>V_T\\),\n\\[\nI_D=\\frac{\\beta_n}{2}(V_{DD}-V_{\\mathrm{in}}-V_T)^2,\n\\]\ngiving\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{DD}-\\frac{\\beta_nR_D}{2}\n(V_{DD}-V_{\\mathrm{in}}-V_T)^2\n}.\n\\]\n\nHowever, this expression is valid only if\n\\[\nV_{DS}\\ge V_{GS}-V_T.\n\\]\nFor this particular connection, that reduces to\n\\[\n\\boxed{V_{\\mathrm{out}}\\ge V_{DD}-V_T}\n\\qquad\\Longleftrightarrow\\qquad\n\\boxed{I_DR_D\\le V_T}.\n\\]\n\nThus, tying the gate to \\(V_{DD}\\) does **not** guarantee saturation: the saturated output range is confined to approximately\n\\[\nV_{DD}-V_T\\le V_{\\mathrm{out}}\\le V_{DD}.\n\\]\n\n### Triode region\nAt sufficiently low \\(V_{\\mathrm{in}}\\), the output falls below \\(V_{DD}-V_T\\). The operating point must then satisfy\n\\[\n\\frac{V_{DD}-V_{\\mathrm{out}}}{R_D}\n=\n\\beta_n\\left[\n(V_{DD}-V_{\\mathrm{in}}-V_T)(V_{\\mathrm{out}}-V_{\\mathrm{in}})\n-\\frac{(V_{\\mathrm{out}}-V_{\\mathrm{in}})^2}{2}\n\\right].\n\\]\n\n## 2. Small-signal behavior\n\nAssume a quiescent operating point in saturation. Since the gate is AC-grounded,\n\\[\nv_{gs}=-v_{\\mathrm{in}}.\n\\]\nTherefore,\n\\[\ni_d=-g_mv_{\\mathrm{in}},\n\\qquad\nv_{\\mathrm{out}}=-i_dR_D,\n\\]\nand hence\n\\[\n\\boxed{A_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}=+g_mR_D},\n\\]\nwhere\n\\[\ng_m=\\beta_nV_{OV}=\\frac{2I_{DQ}}{V_{OV}},\n\\qquad\nV_{OV}=V_{DD}-V_{\\mathrm{in},Q}-V_T.\n\\]\n\nThe gain is **noninverting**: increasing the source voltage reduces \\(V_{GS}\\), decreases \\(I_D\\), and therefore raises the drain voltage.\n\nNeglecting \\(r_o\\),\n\\[\n\\boxed{R_{\\mathrm{in}}\\approx\\frac1{g_m}},\n\\qquad\n\\boxed{R_{\\mathrm{out}}\\approx R_D}.\n\\]\n\nIncluding finite transistor output resistance, but still neglecting body effect,\n\\[\nA_v=(g_m+1/r_o)(R_D\\parallel r_o),\n\\]\n\\[\nR_{\\mathrm{in}}=\\frac{r_o+R_D}{1+g_mr_o},\n\\qquad\nR_{\\mathrm{out}}=R_D\\parallel r_o,\n\\]\nwhere the output resistance assumes an ideal input voltage source. If the bulk is AC-grounded and body effect matters, replace \\(g_m\\) by \\(g_m+g_{mb}\\) in these small-signal expressions.\n\n**In summary:** this stage provides positive voltage gain and low input resistance, but its gate-at-\\(V_{DD}\\) bias severely limits the output swing available while remaining in saturation.",
        "format": "markdown",
        "sha256": "05d6d44951a6f17d536cf24be2eccab5f891fc544cd792143e374535aba1b947"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology and derives the noninverting gain and low input resistance. The finite-o expressions and additional DC-region analysis are also consistent with the stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 8082,
        "total_tokens": 9198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7105,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 8082,
        "total_tokens": 9198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7105,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**As drawn, the source of \\(M_1\\) is directly grounded.** Thus \\(C_1\\) connects the input voltage source to ground, not to a source node that can vary. This prevents the circuit from amplifying \\(V_{\\text{in}}\\).\n\n### DC operating point\n\nAt DC, \\(C_1\\) is open, so\n\\[\nV_S=0,\\qquad V_{GS}=V_b,\\qquad\nV_{\\text{out},Q}=V_{DD}-I_{DQ}R_D.\n\\]\n\nFor an NMOS with threshold \\(V_T\\):\n\n- **Cutoff:** If \\(V_b\\le V_T\\),\n  \\[\n  I_{DQ}\\approx0,\\qquad V_{\\text{out},Q}\\approx V_{DD}.\n  \\]\n\n- **Saturation:** Neglecting channel-length modulation and defining\n  \\(\\beta=\\mu_n C_{\\text{ox}}W/L\\),\n  \\[\n  I_{DQ}=\\frac{\\beta}{2}(V_b-V_T)^2,\n  \\]\n  \\[\n  V_{\\text{out},Q}\n  =V_{DD}-\\frac{\\beta R_D}{2}(V_b-V_T)^2.\n  \\]\n  This is valid only if\n  \\[\n  V_b>V_T,\\qquad V_{\\text{out},Q}\\ge V_b-V_T.\n  \\]\n\n- **Triode:** If the saturation condition fails, determine the operating point from\n  \\[\n  \\frac{V_{DD}-V_{\\text{out},Q}}{R_D}\n  =\\beta\\left[(V_b-V_T)V_{\\text{out},Q}\n  -\\frac{V_{\\text{out},Q}^{\\,2}}{2}\\right].\n  \\]\n\n### Small-signal behavior\n\nWith fixed \\(V_b\\) and \\(V_{DD}\\), the gate and source both have zero small-signal voltage:\n\\[\nv_g=0,\\qquad v_s=0\n\\quad\\Rightarrow\\quad v_{gs}=0.\n\\]\n\nThe input therefore cannot modulate the transistor current, giving\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{v_{\\text{in}}}=0}.\n\\]\n\nThe input sees only the capacitor:\n\\[\nZ_{\\text{in}}(j\\omega)=\\frac{1}{j\\omega C_1}.\n\\]\nAt low frequencies, the small-signal output resistance is \\(R_D\\parallel r_o\\).\n\n**If a common-gate amplifier was intended**, the direct source-to-ground connection must instead be replaced by a suitable bias element, such as a current sink or resistor. The corrected circuit could then provide noninverting voltage gain.",
        "format": "markdown",
        "sha256": "15bc0837d281fcd100dbaa8818a7e538f9a212414a6fe43bc2fc8dbabfb580db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source is hard-grounded, so the input is shunted and the ideal small-signal voltage gain is zero. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 3693,
        "total_tokens": 5430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 3693,
        "total_tokens": 5430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**As drawn, the circuit does not amplify \\(V_{\\text{in}}\\).** The critical detail is that \\(M_1\\)’s source is connected directly to ground. Consequently, \\(C_1\\) is connected between the input and ground; it cannot develop an input signal at the transistor’s source.\n\nAssume \\(M_1\\) is an NMOS and \\(V_b\\) and \\(V_{DD}\\) are fixed DC voltages.\n\n### 1. DC operating point\n\nAt DC, \\(C_1\\) is open, and\n\\[\nV_S=0,\\qquad V_{GS}=V_b,\\qquad\nV_{\\text{out},Q}=V_{DD}-I_{DQ}R_D.\n\\]\n\n- If \\(V_b\\le V_T\\), the transistor is approximately off:\n  \\[\n  I_{DQ}\\approx0,\\qquad V_{\\text{out},Q}\\approx V_{DD}.\n  \\]\n\n- If \\(V_b>V_T\\) and the transistor operates in saturation, neglecting channel-length modulation,\n  \\[\n  I_{DQ}=\\frac12\\beta(V_b-V_T)^2,\n  \\qquad\n  \\beta=\\mu_n C_{\\text{ox}}\\frac WL.\n  \\]\n  Thus,\n  \\[\n  V_{\\text{out},Q}\n  =V_{DD}-\\frac12\\beta R_D(V_b-V_T)^2.\n  \\]\n  This requires\n  \\[\n  V_{\\text{out},Q}\\ge V_b-V_T.\n  \\]\n\nIf that saturation condition fails while the transistor is on, its DC operating point must instead satisfy the triode-region equation:\n\\[\n\\frac{V_{DD}-V_{\\text{out},Q}}{R_D}\n=\\beta\\left[(V_b-V_T)V_{\\text{out},Q}\n-\\frac{V_{\\text{out},Q}^{\\,2}}{2}\\right].\n\\]\n\n### 2. Small-signal behavior\n\nThe source is grounded, and the fixed gate bias is also AC ground:\n\\[\nv_s=0,\\qquad v_g=0\n\\quad\\Rightarrow\\quad\nv_{gs}=0.\n\\]\n\nTherefore, the input produces no transistor-current modulation and no output signal:\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{v_{\\text{in}}}=0}.\n\\]\n\nThe input simply sees a capacitor to ground:\n\\[\n\\boxed{Z_{\\text{in}}=\\frac{1}{j\\omega C_1}}.\n\\]\n\nThe small-signal output resistance is\n\\[\n\\boxed{R_{\\text{out}}=R_D\\parallel r_o},\n\\]\nor approximately \\(R_D\\) when channel-length modulation is neglected.\n\n### Interpretation\n\nThe circuit resembles a **common-gate amplifier**, but its direct source-to-ground connection prevents that operation. For a functioning common-gate stage, the source must be allowed to vary with the input—for example, by replacing the direct ground connection with an appropriate bias resistor or current source.",
        "format": "markdown",
        "sha256": "c6449a6a307c36ffca8d2add4ce1069f2df591476597b081d7eae42c27e5fba5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies the source-to-ground short, concludes the input is shorted and the ideal voltage gain is zero. The additional operating-point details do not undermine the essential answer.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 3533,
        "total_tokens": 5270,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 3533,
        "total_tokens": 5270,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**As drawn, this circuit has zero voltage gain:** the source of \\(M_1\\) is wired directly to ground, so \\(C_1\\) cannot apply an input signal to the transistor.\n\n### 1. DC operating point\nAt DC, \\(C_1\\) is open. For the NMOS,\n\\[\nV_{GS}=V_b,\\qquad V_{DS}=V_{\\text{out}},\n\\]\nand\n\\[\nV_{\\text{out}}=V_{DD}-I_D R_D.\n\\]\n\nUsing the long-channel model and neglecting channel-length modulation:\n\n- **Cutoff:** If \\(V_b\\le V_T\\),\n  \\[\n  I_D\\approx 0,\\qquad V_{\\text{out}}\\approx V_{DD}.\n  \\]\n\n- **Saturation:** If \\(V_b>V_T\\) and \\(V_{\\text{out}}\\ge V_b-V_T\\),\n  \\[\n  I_D=\\frac{k_n}{2}(V_b-V_T)^2,\n  \\]\n  so\n  \\[\n  \\boxed{V_{\\text{out}}=V_{DD}-\\frac{k_nR_D}{2}(V_b-V_T)^2},\n  \\]\n  where \\(k_n=\\mu_n C_{\\text{ox}}(W/L)\\).\n\n- If the saturation condition fails, \\(M_1\\) operates in **triode**, and its operating point satisfies\n  \\[\n  \\frac{V_{DD}-V_{\\text{out}}}{R_D}\n  =k_n\\left[(V_b-V_T)V_{\\text{out}}-\\frac{V_{\\text{out}}^2}{2}\\right].\n  \\]\n\n### 2. Small-signal behavior\nWith \\(V_b\\) and \\(V_{DD}\\) fixed, both are AC ground. The source is also directly grounded, hence\n\\[\nv_{gs}=v_g-v_s=0.\n\\]\nThus the input produces no transconductance current:\n\\[\ng_m v_{gs}=0.\n\\]\n\nIncluding the transistor’s output resistance \\(r_o\\), the output-node equation is\n\\[\n\\frac{v_{\\text{out}}}{R_D}+\\frac{v_{\\text{out}}}{r_o}=0,\n\\]\ngiving\n\\[\n\\boxed{A_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}=0}.\n\\]\n\nThe capacitor simply loads the input source:\n\\[\nZ_{\\text{in}}=\\frac{1}{j\\omega C_1},\n\\qquad\ni_{\\text{in}}=j\\omega C_1v_{\\text{in}}.\n\\]\nThe small-signal output resistance is \\(R_D\\parallel r_o\\).\n\n**If a common-gate amplifier was intended, the direct source-to-ground connection must be replaced by an appropriate bias element**, such as a current source, so the source voltage can vary with the input.",
        "format": "markdown",
        "sha256": "7d063b6041a5059d82e7f4c7fa637e34122d7f2168a033529f1f7a2459599e0e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source is directly grounded, so the input cannot create a source voltage or transconductance signal; it concludes the ideal voltage gain is zero. The additional operating-point analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 2700,
        "total_tokens": 4437,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 2700,
        "total_tokens": 4437,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **\\(\\boxed{2\\text{ poles}}\\)**.\n\n- The **gate** and **drain** are the only two independent dynamic nodes.\n- \\(C_{GS}\\), \\(C_{GD}\\), and \\(C_{DB}\\) form a two-node capacitive network. \\(C_{GD}\\) couples the nodes but does not introduce a third independent state.\n- \\(C_{SB}\\) has both terminals grounded, so it has no effect.\n\nThus, the small-signal transfer function has a **second-order denominator**.",
        "format": "markdown",
        "sha256": "7ab3e9d4f9250bca39bbfcc15fb79b6a565d72376c19ac6b6aefd5613935d56e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and accounts for the capacitor connections: CSB is grounded at both terminals, while the remaining capacitors provide only two independent dynamic states.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 902,
        "total_tokens": 2874,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 782,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 902,
        "total_tokens": 2874,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 782,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**, corresponding to the two independent dynamic nodes: the **gate** and the **drain**.\n\n- \\(C_{GS}\\), \\(C_{GD}\\), and \\(C_{DB}\\) form a second-order network. \\(C_{GD}\\) couples the two nodes but does not add an independent state.\n- \\(C_{SB}\\) contributes no pole because both its terminals are grounded.",
        "format": "markdown",
        "sha256": "a8f131fb9f0ff284ae7c7878146c61aa295c810d90db2be21cabb3e553297426"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the capacitor states: CSB is shorted between grounded terminals, while CGS, CGD, and CDB form a second-order network.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 939,
        "total_tokens": 2911,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 846,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 939,
        "total_tokens": 2911,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 846,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\nThere are only two independent dynamic nodes: the **gate** and **drain**. \\(C_{GD}\\) couples these nodes but does not introduce another independent state. \\(C_{SB}\\) contributes no pole because both its terminals are grounded.",
        "format": "markdown",
        "sha256": "37376848bba21ac50e6b49cf470ef6ca7decd7dfc27aea746584d1d73ba6e6bf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and accounts for the grounded CSB being inactive; the gate-drain coupling does not add an independent state.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 759,
        "total_tokens": 2731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 694,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 759,
        "total_tokens": 2731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 694,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **non-inverting voltage amplifier with negative feedback**. The input drives the source of \\(M_1\\), the output is taken at its drain, and \\(R_1,R_2\\) feed a fraction of the output back to the gate.\n\nAssume \\(M_1\\) is an NMOS operating in saturation. Initially neglect channel-length modulation and body effect.\n\n## 1. Feedback and small-signal gain\n\nSince the MOS gate draws negligible current,\n\\[\nv_f=\\beta v_{\\text{out}},\n\\qquad\n\\beta=\\frac{R_2}{R_1+R_2}.\n\\]\n\nThe divider also loads the output. Define\n\\[\nR=R_D\\parallel(R_1+R_2).\n\\]\n\nWith \\(V_{DD}\\) treated as AC ground,\n\\[\nv_{gs}=\\beta v_{\\text{out}}-v_{\\text{in}}.\n\\]\nKCL at the output gives\n\\[\n\\frac{v_{\\text{out}}}{R}\n+g_m\\left(\\beta v_{\\text{out}}-v_{\\text{in}}\\right)=0.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_mR}{1+\\beta g_mR}\n}\n\\]\n\nThe feedback is negative: an increase in output voltage raises the gate voltage, increasing drain current and pulling the output back down.\n\nWriting the loop-gain magnitude as \\(T=\\beta g_mR\\), for \\(T\\gg1\\),\n\\[\n\\boxed{A_v\\approx\\frac{1}{\\beta}\n=1+\\frac{R_1}{R_2}}.\n\\]\n\nIf \\(R_1+R_2\\gg R_D\\), the divider loading is negligible and \\(R\\approx R_D\\).\n\n## 2. Input and output resistances\n\nThe small-signal current entering the source terminal is\n\\[\ni_{\\text{in}}\n=g_m(v_{\\text{in}}-\\beta v_{\\text{out}}).\n\\]\nHence,\n\\[\n\\boxed{\nR_{\\text{in}}\n=\\frac{1+\\beta g_mR}{g_m}\n=\\frac{1}{g_m}+\\beta R\n}.\n\\]\n\nThus feedback increases the input resistance above the usual common-gate value \\(1/g_m\\).\n\nWith the ideal input voltage source set to zero, the output resistance is\n\\[\n\\boxed{\nR_{\\text{out}}\n=\\frac{R}{1+\\beta g_mR}\n}.\n\\]\nFeedback therefore reduces the output resistance.\n\n## 3. DC operating point\n\nUsing uppercase voltages for DC quantities,\n\\[\nV_F=\\beta V_{\\text{out}},\n\\qquad\nV_{GS}=\\beta V_{\\text{out}}-V_{\\text{in}}.\n\\]\n\nThe drain-current balance is\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n=I_D+\\frac{V_{\\text{out}}}{R_1+R_2}.\n\\]\n\nFor a long-channel MOSFET in saturation,\n\\[\nI_D=\\frac{k_n}{2}\n\\left(\\beta V_{\\text{out}}-V_{\\text{in}}-V_{TN}\\right)^2,\n\\]\nwhere \\(k_n=\\mu_nC_{\\text{ox}}W/L\\). These equations determine the bias point and hence \\(g_m\\).\n\nThe operating conditions are\n\\[\n\\beta V_{\\text{out}}-V_{\\text{in}}>V_{TN},\n\\]\n\\[\nV_{\\text{out}}-V_{\\text{in}}\n\\ge \\beta V_{\\text{out}}-V_{\\text{in}}-V_{TN}.\n\\]\n\nFor \\(V_{\\text{out}}\\ge0\\) and \\(V_{TN}>0\\), the saturation condition is automatically satisfied whenever the transistor is on. If it is off,\n\\[\nV_{\\text{out}}\n=V_{DD}\\frac{R_1+R_2}{R_D+R_1+R_2}.\n\\]\n\nImportantly, \\(A_v\\approx1+R_1/R_2\\) is a **small-signal gain**, not a zero-offset DC relation.\n\n## 4. Including finite transistor output resistance\n\nIf channel-length modulation is included through \\(r_o\\), while still neglecting body effect,\n\\[\n\\boxed{\nA_v=\n\\frac{(g_m+1/r_o)R}\n{1+R/r_o+\\beta g_mR}\n}.\n\\]",
        "format": "markdown",
        "sha256": "d843522ef7584fb2e2689c2b6802b5341174d852fa6c292c7b8d93d46860a084"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven input, output-to-gate divider feedback, and negative-feedback operation, and derives the correct closed-loop gain. Extra analyses do not contradict the essential model.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 8231,
        "total_tokens": 9830,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 8231,
        "total_tokens": 9830,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The input is applied to the **source** of \\(M_1\\), and the gate receives feedback from the drain. Thus, this is a **noninverting, source-driven NMOS amplifier with voltage-series (series–shunt) negative feedback**.\n\nAssume low-frequency operation, with \\(M_1\\) biased in saturation. Initially neglect channel-length modulation and body effect.\n\n## 1. Feedback and voltage gain\n\nBecause the MOS gate draws negligible current,\n\\[\nv_f=\\beta_f v_{\\text{out}},\n\\qquad\n\\beta_f=\\frac{R_2}{R_1+R_2}.\n\\]\n\nThe divider also loads the output. Define\n\\[\nR=R_D\\parallel(R_1+R_2).\n\\]\n\nThe transistor’s small-signal drain current is\n\\[\ni_d=g_m(v_f-v_{\\text{in}}).\n\\]\nWith \\(V_{DD}\\) at AC ground, output-node KCL gives\n\\[\n\\frac{v_{\\text{out}}}{R}\n+g_m(\\beta_fv_{\\text{out}}-v_{\\text{in}})=0.\n\\]\nHence,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_mR}{1+\\beta_fg_mR}\n}.\n\\]\n\nThe gain is positive: increasing the source voltage reduces \\(V_{GS}\\), reducing drain current and raising the output voltage.\n\nThe feedback is negative: an increase in output raises the gate voltage, increasing drain current and opposing the original output increase.\n\nThe loop-gain magnitude is\n\\[\nT=\\beta_fg_mR.\n\\]\nFor \\(T\\gg1\\),\n\\[\n\\boxed{\nA_v\\approx\\frac{1}{\\beta_f}\n=1+\\frac{R_1}{R_2}\n}.\n\\]\nIf \\(R_1+R_2\\gg R_D\\), divider loading is negligible and \\(R\\approx R_D\\).\n\n## 2. Input and output resistances\n\nThe small-signal current entering the source terminal is\n\\[\ni_{\\text{in}}=g_m(v_{\\text{in}}-v_f).\n\\]\nTherefore,\n\\[\n\\boxed{\nR_{\\text{in}}\n=\\frac{1+\\beta_fg_mR}{g_m}\n=\\frac{1}{g_m}+\\beta_fR\n}.\n\\]\n\nThus, feedback increases the input resistance above the ordinary common-gate value \\(1/g_m\\). However, the input resistance is **not infinite**, since the input is at the source, not the insulated gate.\n\nWith the ideal input voltage source set to zero, the output resistance is\n\\[\n\\boxed{\nR_{\\text{out}}\n=\\frac{R}{1+\\beta_fg_mR}\n}.\n\\]\nAs expected for voltage feedback, the output resistance is reduced.\n\n## 3. DC operating point\n\nUsing capital letters for DC quantities,\n\\[\nV_F=\\beta_fV_{\\text{out}},\n\\qquad\nV_{GS}=\\beta_fV_{\\text{out}}-V_{\\text{in}}.\n\\]\n\nThe output-node bias equation is\n\\[\n\\boxed{\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n=\nI_D+\\frac{V_{\\text{out}}}{R_1+R_2}\n}.\n\\]\n\nFor a long-channel enhancement NMOS in saturation,\n\\[\nI_D=\\frac{k_n}{2}\n\\left(\\beta_fV_{\\text{out}}-V_{\\text{in}}-V_T\\right)^2,\n\\]\nprovided \\(V_{GS}>V_T\\). These equations determine the bias point and hence \\(g_m\\).\n\nThe saturation condition is\n\\[\nV_{\\text{out}}-V_{\\text{in}}\n\\ge V_{GS}-V_T,\n\\]\nor\n\\[\n(1-\\beta_f)V_{\\text{out}}+V_T\\ge0.\n\\]\nFor positive output voltage and positive threshold voltage, this is automatically satisfied whenever the transistor is on.\n\nIf the transistor is cut off, the output is simply\n\\[\nV_{\\text{out,off}}\n=V_{DD}\\frac{R_1+R_2}{R_D+R_1+R_2}.\n\\]\n\n**Finite-\\(r_o\\) correction:** If channel-length modulation matters, the voltage gain becomes\n\\[\n\\boxed{\nA_v=\n\\frac{g_m+1/r_o}\n{1/R+1/r_o+\\beta_fg_m}\n}\n\\]\nwhile still neglecting body effect.",
        "format": "markdown",
        "sha256": "99447f7f300c789a5d7b4fe4933820c1bb04657551e2f4f582323ab1d2432fb5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 8743,
        "total_tokens": 10342,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 8743,
        "total_tokens": 10342,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **source-driven, non-inverting MOS amplifier with negative voltage feedback**. Assume \\(M_1\\) operates in saturation; initially neglect channel-length modulation and body effect.\n\nDefine\n\\[\nR_B=R_1+R_2,\\qquad\n\\beta=\\frac{R_2}{R_1+R_2},\\qquad\nR_L=R_D\\parallel R_B.\n\\]\nSince the MOS gate draws essentially no current,\n\\[\nV_F=\\beta V_{\\text{out}}.\n\\]\nNotice that the feedback divider also loads the output through \\(R_1+R_2\\).\n\n## 1. Feedback action and voltage gain\n\nIf \\(V_{\\text{in}}\\) rises, \\(V_{GS}\\) decreases, reducing the drain current and raising \\(V_{\\text{out}}\\). The resulting increase in \\(V_F\\) raises the gate voltage, opposing the original change in \\(V_{GS}\\). Thus the feedback is **negative**.\n\nFor small signals, with \\(V_{DD}\\) treated as AC ground,\n\\[\nv_{gs}=\\beta v_{\\text{out}}-v_{\\text{in}},\n\\qquad\nv_{\\text{out}}=-g_mR_Lv_{gs}.\n\\]\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_mR_L}{1+\\beta g_mR_L}\n}.\n\\]\n\nThe loop-gain magnitude is\n\\[\nT=\\beta g_mR_L.\n\\]\nFor \\(T\\gg1\\),\n\\[\n\\boxed{\nA_v\\approx\\frac1\\beta\n=1+\\frac{R_1}{R_2}\n}.\n\\]\nThis is a **small-signal gain**, not an exact DC voltage ratio.\n\nIf \\(R_1+R_2\\gg R_D\\), divider loading is negligible and \\(R_L\\approx R_D\\).\n\n## 2. Input and output resistances\n\nUnder the same small-signal assumptions,\n\\[\n\\boxed{\nR_{\\text{in}}\n=\\frac{1+T}{g_m}\n=\\frac1{g_m}+\\beta R_L\n}\n\\]\nand, with the input voltage source set to zero,\n\\[\n\\boxed{\nR_{\\text{out}}\n=\\frac{R_L}{1+T}\n}.\n\\]\n\nThus the voltage-series, or series–shunt, feedback increases input resistance and decreases output resistance. The input resistance is **not infinite**, because the input is connected to the source rather than the gate.\n\n## 3. DC operating point\n\nThe bias point satisfies\n\\[\nV_{GS}=\\beta V_O-V_I\n\\]\nand\n\\[\n\\frac{V_{DD}-V_O}{R_D}\n=\nI_D+\\frac{V_O}{R_B}.\n\\]\n\nUsing the long-channel saturation model,\n\\[\nI_D=\\frac{k_n}{2}\\left(\\beta V_O-V_I-V_T\\right)^2,\n\\]\nprovided the overdrive is positive and the saturation condition holds. Hence,\n\\[\n\\boxed{\n\\frac{V_{DD}-V_O}{R_D}\n=\n\\frac{V_O}{R_B}\n+\\frac{k_n}{2}\\left(\\beta V_O-V_I-V_T\\right)^2\n}.\n\\]\nThis equation determines the DC output and therefore \\(g_m\\).\n\nThe DC relationship includes a gate–source offset:\n\\[\nV_O=\\frac{V_I+V_{GS}}{\\beta}.\n\\]\nIf the transistor turns off, the output is set by the passive divider:\n\\[\n\\boxed{\nV_O=V_{DD}\\frac{R_B}{R_D+R_B}\n},\n\\]\nnot exactly \\(V_{DD}\\).\n\n### Finite-\\(r_o\\) correction\n\nIf transistor output resistance matters, define\n\\[\nR_P=R_D\\parallel R_B\\parallel r_o.\n\\]\nNeglecting body effect, the more accurate gain is\n\\[\n\\boxed{\nA_v=\\frac{(g_m+1/r_o)R_P}{1+\\beta g_mR_P}\n}.\n\\]",
        "format": "markdown",
        "sha256": "b7f475787383988a19dde10a4f1bcf4c680868aa73d27143ba2d515f037659d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, divider feedback to the gate, negative feedback, and the closed-loop gain. The finite-o refinement is secondary and does not undermine the essential answer.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 7676,
        "total_tokens": 9275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6793,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 7676,
        "total_tokens": 9275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6793,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower (common-drain amplifier)**: \\(M_1\\) is the amplifying transistor, and \\(M_2\\) provides a bias-current sink. It acts mainly as a **voltage buffer and level shifter**, not a high-voltage-gain amplifier.\n\nAssume an unloaded output and enhancement-mode NMOS devices.\n\n## 1. DC operating point\n\nNeglecting channel-length modulation and body effect, define\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}(W/L)_i.\n\\]\n\nIf \\(M_2\\) is saturated, its gate voltage sets the current:\n\\[\nI_Q=\\frac{\\beta_2}{2}(V_b-V_{T2})^2,\n\\qquad V_b>V_{T2}.\n\\]\n\nThe same current flows through \\(M_1\\), so\n\\[\nV_{GS1}=V_{T1}+\\sqrt{\\frac{2I_Q}{\\beta_1}}.\n\\]\n\nBecause \\(V_{GS1}=V_{\\mathrm{in}}-V_{\\mathrm{out}}\\),\n\\[\n\\boxed{V_{\\mathrm{out}}\n=V_{\\mathrm{in}}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}(V_b-V_{T2})}.\n\\]\n\nThus, the output follows the input with an approximately constant downward voltage shift. For identical devices, under these assumptions,\n\\[\n\\boxed{V_{\\mathrm{out}}\\approx V_{\\mathrm{in}}-V_b}.\n\\]\n\n## 2. Operating-region limits\n\nLet\n\\[\nV_{OV1}=V_{GS1}-V_{T1},\\qquad\nV_{OV2}=V_b-V_{T2}.\n\\]\n\nBoth devices remain saturated provided\n\\[\n\\begin{aligned}\nM_2:&\\quad V_{\\mathrm{out}}\\ge V_{OV2},\\\\\nM_1:&\\quad V_{DD}-V_{\\mathrm{out}}\\ge V_{OV1}.\n\\end{aligned}\n\\]\n\nHence the saturation headroom conditions are\n\\[\n\\boxed{V_{OV2}\\le V_{\\mathrm{out}}\\le V_{DD}-V_{OV1}}.\n\\]\n\nThese are transistor-compliance limits. If the input itself cannot exceed \\(V_{DD}\\), the follower relation gives the stricter upper output level\n\\[\nV_{\\mathrm{out,max}}\\approx V_{DD}-V_{GS1}.\n\\]\n\nBelow the lower limit, \\(M_2\\) enters triode and no longer maintains the intended constant current.\n\n## 3. Small-signal voltage gain\n\nWith \\(V_{DD}\\) and \\(V_b\\) at AC ground, \\(M_2\\) contributes mainly its output resistance \\(r_{o2}\\). Small-signal KCL gives\n\\[\ng_{m1}(v_{\\mathrm{in}}-v_{\\mathrm{out}})\n=\n\\left(g_{mb1}+\\frac1{r_{o1}}+\\frac1{r_{o2}}\\right)v_{\\mathrm{out}}.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+1/r_{o1}+1/r_{o2}}\n}.\n\\]\n\nHere \\(g_{mb1}\\) accounts for body effect when the body of \\(M_1\\) is grounded. Set it to zero if body effect is neglected or the body is tied to the source.\n\nWith negligible body effect and large output resistances,\n\\[\n\\boxed{A_v\\approx +1}.\n\\]\nThe gain is **noninverting and slightly less than unity**.\n\n## 4. Input and output resistance\n\nAt low frequencies,\n\\[\n\\boxed{R_{\\mathrm{in}}\\approx\\infty}\n\\]\nbecause the MOS gate draws essentially no current.\n\nWith the input AC-grounded,\n\\[\n\\boxed{\nR_{\\mathrm{out}}\n=\\frac{1}{g_{m1}+g_{mb1}+1/r_{o1}+1/r_{o2}}\n\\approx\\frac1{g_{m1}}\n}\n\\]\nunder the usual simplifying assumptions.\n\n**In summary:** \\(V_b\\) sets the quiescent current, while \\(M_1\\) produces a high-input-resistance, low-output-resistance output that tracks \\(V_{\\mathrm{in}}\\) approximately one \\(V_{GS1}\\) below it.",
        "format": "markdown",
        "sha256": "9dbfbf5cd4e96e9e66c9255400d46bbbeb46754c90fa34f2dad52bba696f59b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, and gives the positive, slightly sub-unity gain with the appropriate body-effect and output-resistance terms. The added bias, headroom, and resistance analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 4072,
        "total_tokens": 5296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 4072,
        "total_tokens": 5296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS source follower (common-drain amplifier)** with an NMOS current-sink load:\n\n- \\(M_1\\) buffers the input: its source is the output.\n- \\(M_2\\), biased by \\(V_b\\), sets the quiescent current.\n\nAssume no external DC load and that both transistors operate in saturation.\n\n## 1. DC operating point\n\nDefine\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}(W/L)_i.\n\\]\n\nNeglecting channel-length modulation and body effect, \\(M_2\\) establishes\n\\[\nI_Q=\\frac{\\beta_2}{2}(V_b-V_{T2})^2,\n\\qquad V_b>V_{T2}.\n\\]\n\nSince \\(I_{D1}=I_{D2}=I_Q\\),\n\\[\nI_Q=\\frac{\\beta_1}{2}(V_{\\mathrm{in}}-V_{\\mathrm{out}}-V_{T1})^2.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{\\mathrm{in}}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{T2})\n}\n\\]\n\nThus, the output follows the input with a downward DC shift equal to \\(V_{GS1}\\). For identical devices, with body effect neglected,\n\\[\n\\boxed{V_{\\mathrm{out}}=V_{\\mathrm{in}}-V_b.}\n\\]\n\nIf \\(M_1\\)'s bulk is grounded, its threshold increases as its source voltage rises, so the actual DC relationship is not exactly linear.\n\n## 2. Small-signal voltage gain\n\nAt low frequencies, \\(V_{DD}\\) and \\(V_b\\) are AC grounds. Because \\(M_2\\)'s gate and source have no small-signal voltage, it contributes only its output resistance \\(r_{o2}\\).\n\nWriting KCL at the output gives\n\\[\ng_{m1}(v_{\\mathrm{in}}-v_{\\mathrm{out}})\n=\n\\left(g_{mb1}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right)v_{\\mathrm{out}}.\n\\]\n\nHence,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+1/r_{o1}+1/r_{o2}}\n}\n\\]\n\nHere \\(g_{mb1}\\) accounts for body effect; set it to zero if the body is connected to the source.\n\nThe gain is **positive and slightly less than unity**. With negligible body effect and very large output resistances,\n\\[\nA_v\\approx 1.\n\\]\n\n## 3. Input and output resistance\n\nIgnoring gate leakage and capacitances,\n\\[\n\\boxed{R_{\\mathrm{in}}\\approx\\infty.}\n\\]\n\nWith the input AC-grounded,\n\\[\n\\boxed{\nR_{\\mathrm{out}}\n=\\frac{1}{g_{m1}+g_{mb1}+1/r_{o1}+1/r_{o2}}\n\\approx\\frac{1}{g_{m1}+g_{mb1}}.\n}\n\\]\n\nThis high input resistance and low output resistance make the circuit useful as a voltage buffer.\n\n## 4. Operating range and output swing\n\nLet\n\\[\nV_{OV1}=V_{GS1}-V_{T1},\\qquad\nV_{OV2}=V_b-V_{T2}.\n\\]\n\nFor both devices to remain saturated,\n\\[\n\\underbrace{V_{\\mathrm{out}}\\ge V_{OV2}}_{\\text{\\(M_2\\) saturation}},\n\\qquad\n\\underbrace{V_{\\mathrm{out}}\\le V_{DD}-V_{OV1}}_{\\text{\\(M_1\\) saturation}}.\n\\]\n\nTherefore, the saturation headroom window is\n\\[\n\\boxed{V_{OV2}\\le V_{\\mathrm{out}}\\le V_{DD}-V_{OV1}.}\n\\]\n\nIf the input itself cannot exceed \\(V_{DD}\\), the follower relationship imposes the stricter upper limit\n\\[\nV_{\\mathrm{out,max}}\\approx V_{DD}-V_{T1}-V_{OV1}.\n\\]\n\n**In summary:** the circuit is a non-inverting, approximately unity-gain buffer; \\(M_2\\) sets its bias current, while \\(M_1\\) produces an output approximately one \\(V_{GS}\\) below the input.",
        "format": "markdown",
        "sha256": "2eb5bcd8cf7283e439a360778b787affcf9d91ec301b088ef236a5b973e9b49d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with its source at the output and M2 as the current-sink load. The gain is correctly positive and below unity, with appropriate body-effect and output-resistance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 4607,
        "total_tokens": 5831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 4607,
        "total_tokens": 5831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower (common-drain amplifier)**. \\(M_1\\) is the amplifying device, while \\(M_2\\), biased by \\(V_b\\), acts as a current sink.\n\n## 1. DC operating point\n\nAssume both MOSFETs operate in saturation. Initially neglect body effect and channel-length modulation, and define\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}(W/L)_i.\n\\]\n\nThe bias transistor sets the current:\n\\[\nI_D=\\frac{\\beta_2}{2}(V_b-V_{T2})^2,\n\\qquad V_b>V_{T2}.\n\\]\n\nThe same current flows through \\(M_1\\), so\n\\[\nI_D=\\frac{\\beta_1}{2}(V_{\\mathrm{in}}-V_{\\mathrm{out}}-V_{T1})^2.\n\\]\nConsequently,\n\\[\n\\boxed{V_{\\mathrm{out}}\n=V_{\\mathrm{in}}-V_{T1}-\\sqrt{\\frac{2I_D}{\\beta_1}}}\n\\]\nor\n\\[\n\\boxed{V_{\\mathrm{out}}\n=V_{\\mathrm{in}}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}(V_b-V_{T2}).}\n\\]\n\nThus, the output follows the input with a downward DC level shift of \\(V_{GS1}\\).\n\nFor matched devices with equal thresholds and negligible body effect,\n\\[\n\\boxed{V_{\\mathrm{out}}=V_{\\mathrm{in}}-V_b.}\n\\]\n\n### Saturation requirements\n\nWriting \\(V_{OVi}=V_{GSi}-V_{Ti}\\), both devices remain saturated if\n\\[\n\\boxed{V_{\\mathrm{out}}\\ge V_{OV2}},\n\\qquad\n\\boxed{V_{DD}-V_{\\mathrm{out}}\\ge V_{OV1}}.\n\\]\n\nIf the input cannot exceed \\(V_{DD}\\), the maximum follower output is further limited to approximately\n\\[\nV_{\\mathrm{out,max}}=V_{DD}-V_{T1}-V_{OV1}.\n\\]\n\n## 2. Small-signal voltage gain\n\nTreat \\(V_{DD}\\) and \\(V_b\\) as AC grounds. Let \\(g_{oi}=1/r_{oi}\\), and include \\(M_1\\)'s body transconductance \\(g_{mb1}\\) if its bulk is grounded.\n\nThe small-signal current supplied by \\(M_1\\) is\n\\[\ni_1=g_{m1}(v_{\\mathrm{in}}-v_{\\mathrm{out}})\n-(g_{mb1}+g_{o1})v_{\\mathrm{out}}.\n\\]\nSince \\(M_2\\)'s gate and source are AC-grounded, its incremental drain current is simply\n\\[\ni_2=g_{o2}v_{\\mathrm{out}}.\n\\]\n\nEquating these currents gives\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}.\n}\n\\]\n\nNeglecting body effect,\n\\[\n\\boxed{\nA_v=\n\\frac{g_{m1}(r_{o1}\\parallel r_{o2})}\n{1+g_{m1}(r_{o1}\\parallel r_{o2})}\n\\approx 1.\n}\n\\]\n\nThe gain is **positive and less than unity**. Even with very large output resistances, body effect reduces it to approximately\n\\[\nA_v\\approx\\frac{g_{m1}}{g_{m1}+g_{mb1}}.\n\\]\n\n## 3. Input and output resistances\n\nBecause the input drives an insulated MOS gate,\n\\[\n\\boxed{R_{\\mathrm{in}}\\approx\\infty}\n\\]\nat low frequency.\n\nWith the input held constant, the output resistance is\n\\[\n\\boxed{\nR_{\\mathrm{out}}\n=\\frac{1}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n\\approx\\frac{1}{g_{m1}+g_{mb1}}.\n}\n\\]\n\nFor a resistive load \\(R_L\\) connected to AC ground, add \\(1/R_L\\) to the voltage-gain denominator.\n\n**Overall:** this stage is a noninverting voltage buffer with high input resistance, low output resistance, nearly unity voltage gain, and a DC level shift set by \\(V_{GS1}\\).",
        "format": "markdown",
        "sha256": "fee5c18ad47a2fb1530dbe3c7028ffde676c7f274692fc0033e6aab5157cb277"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and current-sink load, and derives a positive gain below unity with body effect and finite output resistances. The operating-point and resistance analysis is consistent with the topology.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 5134,
        "total_tokens": 6358,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 5134,
        "total_tokens": 6358,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit function\n\nThis is a **CMOS inverter (NOT gate)**:\n\n- \\(M_1\\) is an **NMOS pull-down transistor**, connecting the output to ground.\n- \\(M_2\\) is a **PMOS pull-up transistor**, connecting the output to \\(V_{DD}\\).\n- Their gates share \\(V_{\\text{in}}\\), and their drains share \\(V_{\\text{out}}\\).\n\n### Logic operation\n\n| Input | \\(M_1\\) (NMOS) | \\(M_2\\) (PMOS) | Output |\n|---|---|---|---|\n| \\(V_{\\text{in}}=0\\) | OFF | ON | \\(V_{\\text{out}}\\approx V_{DD}\\) |\n| \\(V_{\\text{in}}=V_{DD}\\) | ON | OFF | \\(V_{\\text{out}}\\approx 0\\) |\n\nThus, in digital notation,\n\\[\n\\boxed{V_{\\text{out}}=\\operatorname{NOT}(V_{\\text{in}})}.\n\\]\n\n## 2. Transition between logic states\n\nThe relevant gate-to-source voltages are\n\\[\nV_{GS1}=V_{\\text{in}},\\qquad\nV_{SG2}=V_{DD}-V_{\\text{in}}.\n\\]\n\nTherefore:\n\n- \\(M_1\\) turns on when \\(V_{\\text{in}}>V_{Tn}\\).\n- \\(M_2\\) turns on when \\(V_{\\text{in}}<V_{DD}-|V_{Tp}|\\).\n\nFor the usual case \\(V_{DD}>V_{Tn}+|V_{Tp}|\\), **both transistors conduct during the transition**. The output falls steeply as the input rises, and its DC value is determined by\n\\[\nI_{Dn}=|I_{Dp}|.\n\\]\n\n### Switching threshold\n\nDefine \\(V_M\\) as the point where \\(V_{\\text{in}}=V_{\\text{out}}=V_M\\). Both devices are then in saturation. Using the long-channel square-law model and neglecting channel-length modulation,\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{Tn})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{Tp}|)^2,\n\\]\nwhere \\(\\beta=\\mu C_{\\text{ox}}W/L\\).\n\nSolving,\n\\[\n\\boxed{\nV_M=\n\\frac{\\sqrt{\\beta_p}(V_{DD}-|V_{Tp}|)\n+\\sqrt{\\beta_n}V_{Tn}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n}.\n\\]\n\nFor matched strengths and equal threshold magnitudes,\n\\[\n\\beta_n=\\beta_p,\\quad V_{Tn}=|V_{Tp}|\n\\quad\\Rightarrow\\quad\n\\boxed{V_M=\\frac{V_{DD}}{2}}.\n\\]\n\n## 3. Current and power\n\n- **At either valid logic state:** one transistor is off, so ideally there is no DC path from \\(V_{DD}\\) to ground. Static power is therefore approximately zero, apart from leakage.\n- **During switching:** both devices can conduct briefly, producing short-circuit current.\n- **With output load capacitance \\(C_L\\):** charging and discharging consume dynamic power,\n  \\[\n  P_{\\text{dynamic}}\\approx \\alpha C_LV_{DD}^{2}f,\n  \\]\n  where \\(\\alpha\\) is the average number of output \\(0\\to1\\) transitions per clock cycle.\n\nThe circuit therefore provides **rail-to-rail logic inversion, high input impedance, and very low static power consumption**.",
        "format": "markdown",
        "sha256": "c6cdb2e39b667341436ddd16f8e0140ecd0af253cf61b53efef3b5fd8c5e24f9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down, PMOS pull-up, and logic operation. The additional switching, threshold, and power analysis is consistent and does not contradict the circuit’s operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3379,
        "total_tokens": 3659,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3379,
        "total_tokens": 3659,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter (NOT gate)**:\n\n- \\(M_1\\) is an **NMOS pull-down transistor**, connected to ground.\n- \\(M_2\\) is a **PMOS pull-up transistor**, connected to \\(V_{DD}\\).\n- Their gates share \\(V_{\\text{in}}\\), and their drains share \\(V_{\\text{out}}\\).\n\n## 1. DC operation\n\nThe controlling gate-to-source voltages are\n\\[\nV_{GS1}=V_{\\text{in}},\\qquad V_{SG2}=V_{DD}-V_{\\text{in}}.\n\\]\n\nThus, \\(M_1\\) turns on when \\(V_{\\text{in}}>V_{TN}\\), while \\(M_2\\) turns on when \\(V_{\\text{in}}<V_{DD}-|V_{TP}|\\).\n\n| Input | \\(M_1\\) (NMOS) | \\(M_2\\) (PMOS) | Output |\n|---|---|---|---|\n| \\(V_{\\text{in}}=0\\) | OFF | ON | \\(V_{\\text{out}}\\approx V_{DD}\\), logic 1 |\n| \\(V_{\\text{in}}=V_{DD}\\) | ON | OFF | \\(V_{\\text{out}}\\approx 0\\), logic 0 |\n\nTherefore, the output is the logical complement of the input:\n\\[\n\\boxed{Y=\\neg X}.\n\\]\n\n## 2. Transition region\n\nFor a normal supply voltage, both transistors conduct over the input range\n\\[\nV_{TN}<V_{\\text{in}}<V_{DD}-|V_{TP}|.\n\\]\nIn this region, increasing \\(V_{\\text{in}}\\) strengthens the pull-down and weakens the pull-up, so \\(V_{\\text{out}}\\) falls sharply. The voltage-transfer characteristic is therefore **nonlinear**, with a large negative slope near the switching point.\n\nThe switching voltage \\(V_M\\) is defined by \\(V_{\\text{in}}=V_{\\text{out}}=V_M\\). Using the long-channel square-law model and neglecting channel-length modulation, both transistors are saturated there, so\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{TP}|)^2.\n\\]\nHence,\n\\[\n\\boxed{\nV_M=\n\\frac{\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)\n+\\sqrt{\\beta_n}V_{TN}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n},\n\\qquad\n\\beta=\\mu C_{\\text{ox}}\\frac WL.\n\\]\nFor matched strengths and equal threshold magnitudes, \\(V_M=V_{DD}/2\\).\n\n## 3. Power behavior\n\nAt either rail-level input, one transistor is off, so **ideal static supply power is zero**; practical devices have leakage. Power is consumed when the output capacitance charges or discharges, and when both transistors conduct during a transition—or if the input is held in the transition region.",
        "format": "markdown",
        "sha256": "04bf4924bb58693507c447c7b1e94cb8dcb8de3c9eb2023e0c594dfc699ff06e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and explains the input/output behavior. The additional switching-point and power analysis is also consistent with the stated assumptions.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 2744,
        "total_tokens": 3024,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 2744,
        "total_tokens": 3024,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter (NOT gate)**:\n\n- \\(M_1\\) is an **NMOS** transistor that pulls the output toward ground.\n- \\(M_2\\) is a **PMOS** transistor that pulls the output toward \\(V_{DD}\\).\n- Their gates share \\(V_{\\text{in}}\\), and their drains share \\(V_{\\text{out}}\\).\n\n## 1. DC operation\n\nLet \\(V_{TN}>0\\) be the NMOS threshold and \\(|V_{TP}|>0\\) the PMOS threshold magnitude. The controlling voltages are\n\\[\nV_{GS1}=V_{\\text{in}},\\qquad V_{SG2}=V_{DD}-V_{\\text{in}}.\n\\]\n\nThus, \\(M_1\\) turns on when \\(V_{\\text{in}}>V_{TN}\\), while \\(M_2\\) turns on when \\(V_{\\text{in}}<V_{DD}-|V_{TP}|\\).\n\nFor the usual case \\(V_{DD}>V_{TN}+|V_{TP}|\\):\n\n| Input voltage | \\(M_1\\), NMOS | \\(M_2\\), PMOS | Output |\n|---|---|---|---|\n| \\(V_{\\text{in}}\\le V_{TN}\\) | OFF | ON | \\(V_{\\text{out}}\\approx V_{DD}\\) |\n| \\(V_{TN}<V_{\\text{in}}<V_{DD}-|V_{TP}|\\) | ON | ON | Transition from high to low |\n| \\(V_{\\text{in}}\\ge V_{DD}-|V_{TP}|\\) | ON | OFF | \\(V_{\\text{out}}\\approx 0\\) |\n\nIn particular,\n\\[\nV_{\\text{in}}=0\\Rightarrow V_{\\text{out}}\\approx V_{DD},\n\\qquad\nV_{\\text{in}}=V_{DD}\\Rightarrow V_{\\text{out}}\\approx0.\n\\]\nTherefore, in logic notation,\n\\[\n\\boxed{Y=\\overline{A}}.\n\\]\n\n## 2. Switching voltage\n\nDefine the switching point \\(V_M\\) by\n\\[\nV_{\\text{in}}=V_{\\text{out}}=V_M.\n\\]\n\nBoth transistors are then in saturation. Using the long-channel square-law model and neglecting channel-length modulation, their equal DC currents give\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{TP}|)^2,\n\\]\nwhere\n\\[\n\\beta_n=\\mu_n C_{\\text{ox}}(W/L)_1,\\qquad\n\\beta_p=\\mu_p C_{\\text{ox}}(W/L)_2.\n\\]\n\nSolving,\n\\[\n\\boxed{\nV_M=\n\\frac{\\sqrt{\\beta_n}V_{TN}\n+\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n}.\n\\]\n\nFor equal drive strengths and equal threshold magnitudes,\n\\[\n\\beta_n=\\beta_p,\\qquad V_{TN}=|V_{TP}|\n\\quad\\Rightarrow\\quad\n\\boxed{V_M=\\frac{V_{DD}}{2}}.\n\\]\n\nThe voltage-transfer characteristic decreases sharply around \\(V_M\\), giving a large negative voltage gain.\n\n## 3. Power and loading\n\n- **At either logic rail:** one transistor is off, so ideal steady-state supply current is zero. Real devices have leakage.\n- **At intermediate input voltages:** both transistors conduct, allowing current directly from \\(V_{DD}\\) to ground.\n- **During switching:** \\(M_2\\) charges the output capacitance and \\(M_1\\) discharges it. The capacitive switching power is approximately\n  \\[\n  P_{\\text{dyn}}=\\alpha C_LV_{DD}^{2}f,\n  \\]\n  where \\(\\alpha\\) is the average number of output \\(0\\to1\\) transitions per clock cycle.\n- **Input resistance is very high**, because the MOS gates ideally draw no DC current.\n\nNumerical currents, the full transfer curve, and propagation delays require the device parameters, supply voltage, and output load.",
        "format": "markdown",
        "sha256": "9ff8def6911f6e15ed78a3f833fcdd2bcbcb320c685da39423cf625e05f19b35"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up. The additional operating-point, switching, and power analysis is consistent with inverter operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 4551,
        "total_tokens": 4831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 4551,
        "total_tokens": 4831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both \\(M_1\\) and \\(M_2\\) are nMOS transistors as drawn.** Thus, this is **not a conventional CMOS inverter**: \\(M_1\\) is a source-follower pull-up, while \\(M_2\\) pulls the output toward ground.\n\nAssume equal thresholds \\(V_T>0\\), no DC output load, \\(0\\le V_{\\text{in}}\\le V_{DD}\\), and long-channel operation without body effect or channel-length modulation. Define\n\\[\n\\beta_i=\\mu_n C_{\\text{ox}}(W/L)_i.\n\\]\n\n### 1. Device voltages\nFor the upper transistor,\n\\[\nV_{GS1}=V_{\\text{in}}-V_{\\text{out}},\\qquad\nV_{DS1}=V_{DD}-V_{\\text{out}}.\n\\]\nFor the lower transistor,\n\\[\nV_{GS2}=V_{\\text{in}},\\qquad V_{DS2}=V_{\\text{out}}.\n\\]\n\n### 2. Low input: \\(V_{\\text{in}}\\le V_T\\)\nBoth devices are off for an output within the supply rails. Therefore,\n\\[\n\\boxed{V_{\\text{out}}\\text{ is floating, not driven high or low.}}\n\\]\nIts voltage depends on stored charge, leakage, and any external load.\n\n### 3. Input above threshold: \\(V_{\\text{in}}>V_T\\)\nAt the DC operating point, both devices conduct.\n\n- **\\(M_1\\) is saturated:** its saturation condition reduces to\n  \\[\n  V_{\\text{in}}\\le V_{DD}+V_T,\n  \\]\n  which holds over the assumed input range.\n- **\\(M_2\\) is in triode:** for \\(M_1\\) to conduct,\n  \\[\n  V_{\\text{out}}<V_{\\text{in}}-V_T,\n  \\]\n  which is precisely \\(M_2\\)'s triode-region condition.\n\nEquating their currents gives\n\\[\n\\frac{\\beta_1}{2}(V_{\\text{in}}-V_{\\text{out}}-V_T)^2\n=\n\\beta_2\\left[(V_{\\text{in}}-V_T)V_{\\text{out}}\n-\\frac{V_{\\text{out}}^2}{2}\\right].\n\\]\nThe physically valid solution is\n\\[\n\\boxed{\nV_{\\text{out}}\n=\n\\left(1-\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}\\right)\n(V_{\\text{in}}-V_T)\n}.\n\\]\n\nFor identical transistors, \\(\\beta_1=\\beta_2=\\beta\\):\n\\[\n\\boxed{\nV_{\\text{out}}\n=\\left(1-\\frac{1}{\\sqrt2}\\right)(V_{\\text{in}}-V_T)\n\\approx0.293(V_{\\text{in}}-V_T)\n}.\n\\]\nThus the incremental voltage gain is positive:\n\\[\n\\frac{dV_{\\text{out}}}{dV_{\\text{in}}}\\approx0.293.\n\\]\n\n### 4. Supply current\nWhen conducting,\n\\[\n\\boxed{\nI_{DD}=\n\\frac{\\beta_1\\beta_2}{2(\\beta_1+\\beta_2)}\n(V_{\\text{in}}-V_T)^2\n}.\n\\]\nFor identical devices,\n\\[\nI_{DD}=\\frac{\\beta}{4}(V_{\\text{in}}-V_T)^2,\n\\qquad P_{\\text{DC}}=V_{DD}I_{DD}.\n\\]\n\n**Conclusion:** The circuit has a floating output at low input and a limited, increasing output at higher input, with continuous supply current. For matched devices, even at \\(V_{\\text{in}}=V_{DD}\\), the output is only \\(0.293(V_{DD}-V_T)\\); it does not provide inverter action or rail-to-rail logic levels.",
        "format": "markdown",
        "sha256": "8f1a9498ebea184b09832529d6f133b21e6dcbb0065b01c98e3755ebc985486a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes the upper source-follower pull-up and lower pull-down, and concludes this is not a normal CMOS inverter. The additional operating-region and current analysis is consistent with the golden solution.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 5317,
        "total_tokens": 5612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4458,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 5317,
        "total_tokens": 5612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4458,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both transistors are drawn as nMOS devices**, so this is **not a conventional CMOS inverter**. The upper transistor acts as a source-follower pull-up, while the lower transistor pulls the output toward ground.\n\nAssume enhancement-mode devices with a common threshold \\(V_T>0\\), no external load, and negligible body effect and channel-length modulation. Let\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}(W/L)_i,\n\\qquad 0\\le V_{\\mathrm{in}}\\le V_{DD}.\n\\]\n\n### 1. Terminal voltages\n\\[\n\\begin{array}{c|cc}\n&V_{GS}&V_{DS}\\\\ \\hline\nM_1&V_{\\mathrm{in}}-V_{\\mathrm{out}}&V_{DD}-V_{\\mathrm{out}}\\\\\nM_2&V_{\\mathrm{in}}&V_{\\mathrm{out}}\n\\end{array}\n\\]\n\n### 2. Input below threshold: \\(V_{\\mathrm{in}}\\le V_T\\)\n\nFor an output voltage between the supply rails, both transistors are off. Hence,\n\n\\[\n\\boxed{V_{\\mathrm{out}}\\text{ is floating—not actively driven high or low.}}\n\\]\n\nAn output capacitance can retain its previous voltage; leakage determines its eventual value.\n\n### 3. Input above threshold: \\(V_{\\mathrm{in}}>V_T\\)\n\nAt the conducting equilibrium, \\(M_1\\) must be on:\n\\[\nV_{\\mathrm{out}}<V_{\\mathrm{in}}-V_T.\n\\]\nThus \\(M_2\\) operates in **triode**. Meanwhile, \\(M_1\\) operates in **saturation**, because\n\\[\nV_{DS1}\\ge V_{GS1}-V_T\n\\quad\\Longleftrightarrow\\quad\nV_{DD}\\ge V_{\\mathrm{in}}-V_T,\n\\]\nwhich holds over the assumed input range.\n\nEquating their currents,\n\\[\n\\frac{\\beta_1}{2}\n(V_{\\mathrm{in}}-V_{\\mathrm{out}}-V_T)^2\n=\n\\beta_2\\left[\n(V_{\\mathrm{in}}-V_T)V_{\\mathrm{out}}\n-\\frac{V_{\\mathrm{out}}^2}{2}\n\\right].\n\\]\n\nThe physically valid solution is\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=(V_{\\mathrm{in}}-V_T)\n\\left(1-\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}\\right)\n}.\n\\]\n\nThe corresponding static supply current is\n\\[\n\\boxed{\nI_{DD}\n=\\frac{\\beta_1\\beta_2}{2(\\beta_1+\\beta_2)}\n(V_{\\mathrm{in}}-V_T)^2\n}.\n\\]\n\n### Identical transistors\n\nFor \\(\\beta_1=\\beta_2=\\beta\\),\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=\\left(1-\\frac{1}{\\sqrt2}\\right)(V_{\\mathrm{in}}-V_T)\n\\approx0.293(V_{\\mathrm{in}}-V_T)\n}\n\\]\nand\n\\[\nI_{DD}=\\frac{\\beta}{4}(V_{\\mathrm{in}}-V_T)^2.\n\\]\n\nThe voltage gain in this region is therefore\n\\[\n\\boxed{\\frac{dV_{\\mathrm{out}}}{dV_{\\mathrm{in}}}\\approx+0.293}.\n\\]\n\n**Conclusion:** this circuit is a non-inverting, attenuating analog stage with an undriven output for low input and static power consumption when conducting. A conventional CMOS inverter would instead use a **pMOS upper transistor**, with its source connected to \\(V_{DD}\\).",
        "format": "markdown",
        "sha256": "8fdb2b58ee08fb84a3ca82e595e6674cd25838f77bebcca0b55456bccfcba360"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes the upper source-follower and lower pull-down actions, and concludes this is not a normal CMOS inverter, satisfying the full-credit rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 6090,
        "total_tokens": 6385,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5285,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 6090,
        "total_tokens": 6385,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5285,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**As drawn, both \\(M_1\\) and \\(M_2\\) are NMOS transistors.** Thus, this is not a conventional CMOS inverter.\n\nAssume enhancement-mode devices with a common threshold \\(V_T>0\\), no output load, and neglect body effect and channel-length modulation. Define\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}(W/L)_i,\n\\qquad 0\\le V_{\\mathrm{in}}\\le V_{DD}.\n\\]\n\n## 1. Terminal voltages\n\nFor the upper transistor,\n\\[\nV_{GS1}=V_{\\mathrm{in}}-V_{\\mathrm{out}},\n\\qquad\nV_{DS1}=V_{DD}-V_{\\mathrm{out}}.\n\\]\n\nFor the lower transistor,\n\\[\nV_{GS2}=V_{\\mathrm{in}},\n\\qquad\nV_{DS2}=V_{\\mathrm{out}}.\n\\]\n\n## 2. Low input: \\(V_{\\mathrm{in}}\\le V_T\\)\n\nBoth transistors are off, assuming \\(V_{\\mathrm{out}}\\ge0\\).\n\nTherefore, **the output floats**; it is not actively driven to either supply rail. Its voltage depends on stored charge and leakage.\n\n## 3. Input above threshold: \\(V_{\\mathrm{in}}>V_T\\)\n\nIn steady state, both transistors conduct.\n\n- \\(M_1\\) is in **saturation**, since\n  \\[\n  V_{DS1}\\ge V_{GS1}-V_T\n  \\iff V_{DD}\\ge V_{\\mathrm{in}}-V_T,\n  \\]\n  which holds throughout the assumed input range.\n- For \\(M_1\\) to conduct, \\(V_{\\mathrm{out}}<V_{\\mathrm{in}}-V_T\\). This also places \\(M_2\\) in the **triode region**.\n\nEquating their currents gives\n\\[\n\\frac{\\beta_1}{2}(V_{\\mathrm{in}}-V_{\\mathrm{out}}-V_T)^2\n=\n\\beta_2\\left[(V_{\\mathrm{in}}-V_T)V_{\\mathrm{out}}\n-\\frac{V_{\\mathrm{out}}^2}{2}\\right].\n\\]\n\nThe physically valid solution is\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=\n\\left(1-\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}\\right)\n(V_{\\mathrm{in}}-V_T)\n}.\n\\]\n\nFor matched devices, \\(\\beta_1=\\beta_2=\\beta\\),\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=\\left(1-\\frac{1}{\\sqrt2}\\right)(V_{\\mathrm{in}}-V_T)\n\\approx0.293(V_{\\mathrm{in}}-V_T)\n}.\n\\]\n\nThe corresponding static supply current is\n\\[\nI_{DD}\n=\\frac{\\beta_1\\beta_2}{2(\\beta_1+\\beta_2)}\n(V_{\\mathrm{in}}-V_T)^2,\n\\]\nor \\(I_{DD}=\\beta(V_{\\mathrm{in}}-V_T)^2/4\\) for matched devices.\n\n## Conclusion\n\nThis circuit has a **floating output at low input** and an **attenuated, non-inverting response above threshold**, with continuous DC power consumption. It is not a valid CMOS inverter. Replacing the upper NMOS with a PMOS would produce the conventional CMOS-inverter topology.",
        "format": "markdown",
        "sha256": "46238a2a659a561130da6bc916548eb4f543d8122ff04ca06a7b5000ae76a3e7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, analyzes the upper device as a source follower and the lower as a pull-down, and concludes the circuit is not a normal inverter. The additional operating-region and gain analysis is consistent with the golden solution.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 5403,
        "total_tokens": 5698,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 5403,
        "total_tokens": 5698,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS common-source amplifier with a diode-connected PMOS load**. \\(M_1\\) is the amplifying transistor; \\(M_2\\) provides a voltage-dependent pull-up.\n\nAssume long-channel MOSFETs, bodies tied to their respective sources, and initially neglect channel-length modulation. Define\n\\[\n\\beta_n=\\mu_nC_{\\rm ox}(W/L)_1,\\qquad\n\\beta_p=\\mu_pC_{\\rm ox}(W/L)_2,\n\\]\nwith thresholds \\(V_{TN}>0\\) and \\(V_{TP}<0\\).\n\n## 1. Operating regions\n\nFor \\(M_1\\),\n\\[\nV_{GS1}=V_{\\rm in},\\qquad V_{DS1}=V_{\\rm out}.\n\\]\nThus it conducts for \\(V_{\\rm in}>V_{TN}\\), and is saturated when\n\\[\nV_{\\rm out}\\ge V_{\\rm in}-V_{TN}.\n\\]\n\nBecause \\(M_2\\)'s gate and drain are connected,\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{\\rm out}.\n\\]\nTherefore, **\\(M_2\\) is always saturated whenever it is on**. Its turn-on condition is\n\\[\nV_{\\rm out}<V_{DD}-|V_{TP}|.\n\\]\n\n## 2. DC transfer characteristic\n\n### Both transistors saturated\n\nWith no external DC load, the drain currents are equal:\n\\[\n\\frac{\\beta_n}{2}(V_{\\rm in}-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{\\rm out}-|V_{TP}|)^2.\n\\]\n\nConsequently,\n\\[\n\\boxed{\nV_{\\rm out}\n=\nV_{DD}-|V_{TP}|\n-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,(V_{\\rm in}-V_{TN})\n}\n\\]\nand the bias current is\n\\[\n\\boxed{I_D=\\frac{\\beta_n}{2}(V_{\\rm in}-V_{TN})^2.}\n\\]\n\nThis solution applies over\n\\[\nV_{TN}<V_{\\rm in}\\le\nV_{TN}+\n\\frac{V_{DD}-|V_{TP}|}\n{1+\\sqrt{\\beta_n/\\beta_p}}.\n\\]\n\n### Larger input: \\(M_1\\) enters triode\n\nOnce \\(V_{\\rm out}<V_{\\rm in}-V_{TN}\\), the output is determined by\n\\[\n\\boxed{\n\\beta_n\\left[(V_{\\rm in}-V_{TN})V_{\\rm out}\n-\\frac{V_{\\rm out}^2}{2}\\right]\n=\n\\frac{\\beta_p}{2}\n(V_{DD}-V_{\\rm out}-|V_{TP}|)^2\n}.\n\\]\nThe output continues falling as the input rises, but its low level is generally nonzero.\n\n### Input below threshold\n\nFor \\(V_{\\rm in}\\le V_{TN}\\), \\(M_1\\) is off and the output is pulled high. In the ideal hard-cutoff model, both devices are off for\n\\[\nV_{\\rm out}\\ge V_{DD}-|V_{TP}|,\n\\]\nso the exact unloaded high-state voltage is not uniquely determined by that model; leakage and stored charge matter.\n\n## 3. Small-signal gain\n\nAround a bias point where both devices are saturated, \\(V_{DD}\\) is AC ground. The diode-connected PMOS presents an incremental resistance\n\\[\nr_{\\text{load}}=\\frac{1}{g_{m2}+g_{ds2}}.\n\\]\n\nOutput-node KCL gives\n\\[\ng_{m1}v_{\\rm in}\n+(g_{m2}+g_{ds1}+g_{ds2})v_{\\rm out}=0,\n\\]\nhence\n\\[\n\\boxed{\nA_v=\\frac{v_{\\rm out}}{v_{\\rm in}}\n=-\\frac{g_{m1}}{g_{m2}+g_{ds1}+g_{ds2}}\n}.\n\\]\n\nNeglecting channel-length modulation,\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_{m1}}{g_{m2}}\n=-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n}.\n\\]\nFor example, if \\(\\beta_n=\\beta_p\\), the gain is approximately \\(-1\\).\n\nThe low-frequency resistances are\n\\[\n\\boxed{R_{\\rm in}\\approx\\infty},\\qquad\n\\boxed{\nR_{\\rm out}=r_{o1}\\parallel r_{o2}\\parallel\\frac{1}{g_{m2}}\n}.\n\\]\n\n## 4. Main characteristics\n\n- **Inverting:** increasing \\(V_{\\rm in}\\) lowers \\(V_{\\rm out}\\).\n- **Static power:** when conducting, \\(P_{\\rm DC}=V_{DD}I_D\\).\n- **Modest gain:** the diode-connected load has low incremental resistance, so gain is set mainly by the transconductance ratio—not by a large current-source load resistance.\n- This is **not a conventional CMOS inverter**, because \\(M_2\\)'s gate is connected to the output rather than the input.",
        "format": "markdown",
        "sha256": "c912e7fcdbe735f3e5084bacfd08c07fad5fb99e86dfe587b7b6502fc40933b4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS common-source stage with a diode-connected PMOS load and gives the inverting gain both with and without channel-length modulation. The additional operating-point and resistance analysis is consistent with the circuit.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 5725,
        "total_tokens": 6445,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 5725,
        "total_tokens": 6445,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit operation\n\n\\(M_1\\) is an **NMOS common-source transistor**, and \\(M_2\\) is a **diode-connected PMOS load** because its gate and drain are tied together.\n\nIncreasing \\(V_{\\text{in}}\\) increases the current drawn by \\(M_1\\). The output voltage falls, increasing \\(V_{SG2}\\) so that \\(M_2\\) supplies the same current. Thus, the circuit is **inverting**.\n\nAssume long-channel MOSFETs, no external load, and define\n\\[\n\\beta_n=\\mu_nC_{\\text{ox}}(W/L)_1,\\qquad\n\\beta_p=\\mu_pC_{\\text{ox}}(W/L)_2.\n\\]\n\n## 2. DC transfer characteristic\n\nThe transistor voltages are\n\\[\nV_{GS1}=V_{\\text{in}},\\qquad V_{DS1}=V_{\\text{out}},\n\\]\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{\\text{out}}.\n\\]\n\nSince \\(M_2\\) is diode-connected, it is **always in saturation when on**. For \\(M_1\\) to be on and saturated,\n\\[\nV_{\\text{in}}>V_{TN},\\qquad\nV_{\\text{out}}\\ge V_{\\text{in}}-V_{TN}.\n\\]\n\nNeglecting channel-length modulation, equating the transistor currents gives\n\\[\nI_D=\n\\frac{\\beta_n}{2}(V_{\\text{in}}-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{\\text{out}}-|V_{TP}|)^2.\n\\]\n\nHence,\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}-|V_{TP}|\n-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,(V_{\\text{in}}-V_{TN})\n}\n\\]\n\nThis expression applies while both devices conduct and \\(M_1\\) remains saturated, or equivalently,\n\\[\n0<V_{\\text{in}}-V_{TN}\n\\le\n\\frac{V_{DD}-|V_{TP}|}\n{1+\\sqrt{\\beta_n/\\beta_p}}.\n\\]\n\n### Outside this range\n\n- **Low input:** For \\(V_{\\text{in}}\\le V_{TN}\\), \\(M_1\\) is off. The conducting-region transfer curve approaches \\(V_{DD}-|V_{TP}|\\) as \\(I_D\\to0\\). Once both devices are off, the ideal cutoff model does not uniquely determine the output; leakage and stored charge matter.\n- **High input:** \\(M_1\\) enters triode. Then \\(V_{\\text{out}}\\) is found from\n  \\[\n  \\beta_n\\left[(V_{\\text{in}}-V_{TN})V_{\\text{out}}\n  -\\frac{V_{\\text{out}}^2}{2}\\right]\n  =\n  \\frac{\\beta_p}{2}\n  (V_{DD}-V_{\\text{out}}-|V_{TP}|)^2.\n  \\]\n\n## 3. Small-signal voltage gain\n\nWith \\(V_{DD}\\) at AC ground, the diode-connected PMOS presents the resistance\n\\[\nr_{d2}=\\frac{1}{g_{m2}+g_{o2}},\n\\qquad g_{oi}=\\frac{1}{r_{oi}}.\n\\]\n\nFor a bias point with both transistors saturated, output-node KCL gives\n\\[\ng_{m1}v_{\\text{in}}\n+(g_{o1}+g_{m2}+g_{o2})v_{\\text{out}}=0.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-\\frac{g_{m1}}{g_{m2}+g_{o1}+g_{o2}}\n}\n\\]\n\nIf channel-length modulation is negligible,\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_{m1}}{g_{m2}}\n=-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n}\n\\]\nbecause both devices carry the same bias current and \\(g_m=\\sqrt{2\\beta I_D}\\).\n\nThe corresponding resistances are\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty},\n\\qquad\n\\boxed{\nR_{\\text{out}}\n=r_{o1}\\parallel r_{o2}\\parallel\\frac{1}{g_{m2}}\n}.\n\\]\n\nThus, this is an inverting amplifier whose gain is set mainly by the transistor-strength ratio. The diode-connected load lowers the output resistance and limits the gain compared with a high-resistance current-source load.",
        "format": "markdown",
        "sha256": "7e3462d60dd5e1fa306cb463a3ae4bfb13d2d29e851212b8a830e4c6f7edac87"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the inverting common-source NMOS stage with a diode-connected PMOS load and gives both the ideal gain and a channel-length-modulation-consistent gain, including both devices’ output conductances.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 4822,
        "total_tokens": 5542,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3789,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 4822,
        "total_tokens": 5542,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3789,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS common-source amplifier with a diode-connected PMOS load**:\n\n- \\(M_1\\): NMOS input transistor.\n- \\(M_2\\): PMOS with its gate connected to its drain.\n- Increasing \\(V_{\\text{in}}\\) increases the pull-down current and decreases \\(V_{\\text{out}}\\), so the stage is **inverting**.\n\nAssume long-channel MOSFETs, bodies tied to their sources, and define\n\\[\n\\beta_1=\\mu_n C_{\\text{ox}}(W/L)_1,\\qquad\n\\beta_2=\\mu_p C_{\\text{ox}}(W/L)_2.\n\\]\n\n## 1. Operating regions\n\nFor \\(M_1\\),\n\\[\nV_{GS1}=V_{\\text{in}},\\qquad V_{DS1}=V_{\\text{out}}.\n\\]\nThus it is on when \\(V_{\\text{in}}>V_{TN}\\), and saturated when\n\\[\nV_{\\text{out}}\\ge V_{\\text{in}}-V_{TN}.\n\\]\n\nFor \\(M_2\\),\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{\\text{out}}.\n\\]\nIt is on when\n\\[\nV_{\\text{out}}<V_{DD}-|V_{TP}|.\n\\]\nBecause its gate and drain are connected, **\\(M_2\\) is always in saturation whenever it is on**.\n\n## 2. DC transfer characteristic\n\nNeglecting channel-length modulation and assuming both devices are saturated, their currents must be equal:\n\\[\n\\frac{\\beta_1}{2}(V_{\\text{in}}-V_{TN})^2\n=\n\\frac{\\beta_2}{2}(V_{DD}-V_{\\text{out}}-|V_{TP}|)^2.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}-|V_{TP}|\n-\\sqrt{\\frac{\\beta_1}{\\beta_2}}\\,(V_{\\text{in}}-V_{TN})\n}\n\\]\n\nThe bias current is\n\\[\n\\boxed{I_D=\\frac{\\beta_1}{2}(V_{\\text{in}}-V_{TN})^2.}\n\\]\n\nThe saturated-input range is\n\\[\nV_{TN}<V_{\\text{in}}\\le\nV_{TN}+\n\\frac{V_{DD}-|V_{TP}|}\n{1+\\sqrt{\\beta_1/\\beta_2}}.\n\\]\n\nOutside this range:\n\n- **Low input:** If \\(V_{\\text{in}}\\le V_{TN}\\), \\(M_1\\) is off and the ideal steady-state current is zero. \\(M_2\\) charges an initially low output toward \\(V_{DD}-|V_{TP}|\\). Once both devices are off, the exact unloaded output is not uniquely fixed by the ideal model; leakage and initial conditions matter.\n- **High input:** \\(M_1\\) enters triode, while \\(M_2\\) remains saturated. The output is then found from\n  \\[\n  \\beta_1\\left[(V_{\\text{in}}-V_{TN})V_{\\text{out}}\n  -\\frac{V_{\\text{out}}^2}{2}\\right]\n  =\n  \\frac{\\beta_2}{2}(V_{DD}-V_{\\text{out}}-|V_{TP}|)^2.\n  \\]\n\n## 3. Small-signal voltage gain\n\nAt a bias point where both transistors are saturated, \\(V_{DD}\\) is AC ground. The diode-connected PMOS presents the incremental load resistance\n\\[\nr_{\\text{load}}=\\frac{1}{g_{m2}+g_{ds2}}.\n\\]\n\nIncluding both transistors’ output conductances,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-\\frac{g_{m1}}{g_{m2}+g_{ds1}+g_{ds2}}\n}\n\\]\n\nIf channel-length modulation is negligible,\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_{m1}}{g_{m2}}\n=-\\sqrt{\\frac{\\beta_1}{\\beta_2}}\n}\n\\]\n\nThe impedances are approximately\n\\[\nR_{\\text{in}}\\rightarrow\\infty,\\qquad\nR_{\\text{out}}=\n\\frac{1}{g_{m2}+g_{ds1}+g_{ds2}}\n\\approx\\frac{1}{g_{m2}}.\n\\]\n\n**Key point:** The diode-connected load behaves roughly like a resistance \\(1/g_{m2}\\), not the much larger \\(r_{o2}\\) of a current-source load. Consequently, the gain is set mainly by the transconductance ratio rather than by intrinsic transistor gain.",
        "format": "markdown",
        "sha256": "a29387b2f5bc2e6066fc67da920ebdf06f8e43b7f5712efac44abf83206aa3b7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the inverting common-source NMOS stage with a diode-connected PMOS load and gives both the consistent channel-length-modulation gain and the usual −gm1/gm2 approximation. The additional operating-region analysis is also consistent with the ideal model.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 5188,
        "total_tokens": 5908,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 5188,
        "total_tokens": 5908,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both transistors are **p-channel MOSFETs**. The circuit is an **inverting common-source stage**: \\(M_2\\) is the input transistor, and \\(M_1\\) is a diode-connected load because its gate and drain are both grounded.\n\nImportantly, grounding \\(M_1\\)’s gate does **not** turn it off—its source is at \\(V_{\\text{out}}\\), not ground.\n\n## 1. DC operating conditions\n\nDefine\n\\[\nT_i=|V_{TPi}|,\\qquad\n\\beta_i=\\mu_p C_{\\text{ox}}(W/L)_i.\n\\]\nInitially neglect body effect and channel-length modulation.\n\n### Load transistor \\(M_1\\)\n\nIts terminal voltages are\n\\[\nV_{SG1}=V_{SD1}=V_{\\text{out}}.\n\\]\nThus \\(M_1\\) conducts when \\(V_{\\text{out}}>T_1\\), and whenever it conducts, it is in saturation:\n\\[\nI_1=\\frac{\\beta_1}{2}(V_{\\text{out}}-T_1)^2.\n\\]\n\n### Input transistor \\(M_2\\)\n\nFor \\(M_2\\),\n\\[\nV_{SG2}=V_{DD}-V_{\\text{in}},\\qquad\nV_{SD2}=V_{DD}-V_{\\text{out}}.\n\\]\nIt is on when\n\\[\nV_{\\text{in}}<V_{DD}-T_2,\n\\]\nand is saturated provided\n\\[\nV_{SD2}\\ge V_{SG2}-T_2\n\\quad\\Longrightarrow\\quad\n\\boxed{V_{\\text{out}}\\le V_{\\text{in}}+T_2}.\n\\]\n\nWith both devices saturated, \\(I_1=I_2\\), giving\n\\[\n\\frac{\\beta_1}{2}(V_{\\text{out}}-T_1)^2\n=\n\\frac{\\beta_2}{2}(V_{DD}-V_{\\text{in}}-T_2)^2.\n\\]\nTherefore,\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nT_1+\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n\\left(V_{DD}-V_{\\text{in}}-T_2\\right)\n}\n\\]\nsubject to the on-state and saturation conditions above. The supply current is\n\\[\nI_D=\\frac{\\beta_2}{2}(V_{DD}-V_{\\text{in}}-T_2)^2.\n\\]\n\n### Other operating regions\n\n- **If \\(V_{\\text{out}}>V_{\\text{in}}+T_2\\):** \\(M_2\\) is in triode. The output follows from\n  \\[\n  \\frac{\\beta_1}{2}(V_{\\text{out}}-T_1)^2\n  =\n  \\beta_2\\!\\left[\n  (V_{DD}-V_{\\text{in}}-T_2)(V_{DD}-V_{\\text{out}})\n  -\\frac{(V_{DD}-V_{\\text{out}})^2}{2}\n  \\right].\n  \\]\n\n- **If \\(V_{\\text{in}}\\ge V_{DD}-T_2\\):** \\(M_2\\) is cut off. The conducting-branch solution approaches \\(V_{\\text{out}}=T_1\\) as current tends to zero. Once both devices are off, the ideal leakage-free model does not uniquely determine the output within \\(0\\le V_{\\text{out}}\\le T_1\\).\n\n## 2. Small-signal voltage gain\n\nWith \\(V_{DD}\\) treated as AC ground, \\(M_1\\) presents a low incremental resistance at the output. Including finite transistor output resistances,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n-\\frac{g_{m2}}\n{g_{m1}+g_{mb1}+1/r_{o1}+1/r_{o2}}\n}\n\\]\nand\n\\[\nR_{\\text{out}}\n=\n\\frac{1}\n{g_{m1}+g_{mb1}+1/r_{o1}+1/r_{o2}}.\n\\]\n\nHere \\(g_{mb1}\\) applies if \\(M_1\\)’s bulk is held at a fixed potential. Omit it if the bulk is tied to \\(M_1\\)’s source.\n\nNeglecting body effect and channel-length modulation,\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_{m2}}{g_{m1}}\n=-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n}.\n\\]\n\nFor matched devices, this gives \\(A_v\\approx-1\\) and\n\\[\nV_{\\text{out}}=V_{DD}-V_{\\text{in}}\n\\]\nover the portion of the transfer characteristic where both devices are saturated.\n\nThus, increasing \\(V_{\\text{in}}\\) reduces \\(M_2\\)’s current and lowers \\(V_{\\text{out}}\\). Unlike a complementary CMOS inverter, this diode-loaded stage draws DC current whenever both devices conduct.",
        "format": "markdown",
        "sha256": "9c705c8035ed15b7ae540baae7c750b0323307dce90f610725ebd5083f91dcf6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load. It gives the required gm/gm gain, approximately −gm2/gm1, and its operating-region discussion is consistent with the circuit.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 10954,
        "total_tokens": 12632,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 10954,
        "total_tokens": 12632,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both transistors are **p-channel MOSFETs**. \\(M_2\\) is the input-controlled pull-up, while \\(M_1\\) has its **gate and drain grounded**, making it a diode-connected PMOS load. Thus, this is a **PMOS-only inverting stage**, not a complementary CMOS inverter.\n\nAssume long-channel square-law operation, neglecting body effect and channel-length modulation. Define\n\\[\nT_i=|V_{TPi}|,\\qquad \\beta_i=\\mu_pC_{\\rm ox}(W/L)_i.\n\\]\n\n## 1. Transistor operating conditions\n\nFor the lower transistor,\n\\[\nV_{SG1}=V_{SD1}=V_{\\rm out}.\n\\]\nConsequently, \\(M_1\\) conducts when \\(V_{\\rm out}>T_1\\), and is always in saturation when conducting:\n\\[\nI_1=\\frac{\\beta_1}{2}(V_{\\rm out}-T_1)^2.\n\\]\nIts grounded gate does **not** mean it is off, since its source is at \\(V_{\\rm out}\\), not ground.\n\nFor \\(M_2\\),\n\\[\nV_{SG2}=V_{DD}-V_{\\rm in},\\qquad\nV_{SD2}=V_{DD}-V_{\\rm out}.\n\\]\nIt is on when\n\\[\nV_{\\rm in}<V_{DD}-T_2,\n\\]\nand saturated when\n\\[\nV_{\\rm out}\\le V_{\\rm in}+T_2.\n\\]\n\n## 2. DC transfer characteristic\n\nAt equilibrium, \\(I_1=I_2\\).\n\n### Both transistors saturated\n\nEquating their currents gives\n\\[\n\\frac{\\beta_1}{2}(V_{\\rm out}-T_1)^2\n=\n\\frac{\\beta_2}{2}(V_{DD}-V_{\\rm in}-T_2)^2,\n\\]\nso\n\\[\n\\boxed{\nV_{\\rm out}\n=T_1+\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n\\left(V_{DD}-V_{\\rm in}-T_2\\right)\n}\n\\]\nprovided both devices are on and \\(V_{\\rm out}\\le V_{\\rm in}+T_2\\).\n\nThus, increasing the input reduces the output: the stage is **inverting**.\n\n### \\(M_2\\) in triode\n\nWhen \\(V_{\\rm out}>V_{\\rm in}+T_2\\), the output instead satisfies\n\\[\n\\frac{\\beta_1}{2}(V_{\\rm out}-T_1)^2\n=\n\\beta_2\\left[\n(V_{DD}-V_{\\rm in}-T_2)(V_{DD}-V_{\\rm out})\n-\\frac{(V_{DD}-V_{\\rm out})^2}{2}\n\\right].\n\\]\n\nFor example, with identical devices, \\(T_1=T_2=T\\) and \\(\\beta_1=\\beta_2\\), at \\(V_{\\rm in}=0\\):\n\\[\n\\boxed{\nV_{\\rm out,H}=T+\\frac{V_{DD}-T}{\\sqrt2}\n}\n\\]\nso even the high output is below \\(V_{DD}\\).\n\n### \\(M_2\\) off\n\nFor \\(V_{\\rm in}\\ge V_{DD}-T_2\\), \\(M_2\\) is off. Starting from a higher output voltage, \\(M_1\\) discharges the node toward approximately \\(T_1\\), where strong-inversion conduction stops.\n\nStrictly, in the ideal hard-cutoff model, any \\(V_{\\rm out}\\le T_1\\) is a zero-current equilibrium. Hence, the circuit does **not** provide a strong pull-down to ground; its eventual off-state voltage depends on leakage and loading.\n\n## 3. Small-signal gain\n\nWith both devices saturated,\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_{m2}}{g_{m1}}\n=-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n}\n\\]\nso matched devices give \\(A_v\\approx-1\\).\n\nIncluding finite output resistances,\n\\[\nA_v=-\\frac{g_{m2}}{g_{m1}+g_{ds1}+g_{ds2}}.\n\\]\nIf \\(M_1\\)'s bulk is fixed rather than source-tied, body effect adds \\(g_{mb1}\\) to the denominator.\n\n**Overall:** this is a ratioed PMOS inverter/common-source amplifier. It draws static current when both devices conduct and does not provide rail-to-rail output levels.",
        "format": "markdown",
        "sha256": "c1df99e391762e7b0c77f14b7a4f893e8b431ea39507b8536a05442344236d97"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load to ground. It gives the required gm/gm gain, approximately −gm2/gm1, and its additional operating-point discussion is consistent with that interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 9111,
        "total_tokens": 10789,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8126,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 9111,
        "total_tokens": 10789,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8126,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both devices are **p-channel MOSFETs**. The circuit is a **pMOS common-source stage with a diode-connected pMOS load**, so it acts as an inverter.\n\nThe key point is that \\(M_1\\)’s **source is at \\(V_{\\text{out}}\\)**, while its gate and drain are grounded. A grounded gate therefore does not necessarily turn \\(M_1\\) off.\n\nAssume long-channel devices, neglect body effect, and define\n\\[\nT_i=|V_{TPi}|,\\qquad \\beta_i=\\mu_p C_{\\text{ox}}(W/L)_i.\n\\]\n\n## 1. DC operation\n\n### Load transistor \\(M_1\\)\n\nSince\n\\[\nV_{SG1}=V_{SD1}=V_{\\text{out}},\n\\]\n\\(M_1\\) conducts for \\(V_{\\text{out}}>T_1\\) and is **always saturated when on**. Neglecting channel-length modulation,\n\\[\nI_1=\\frac{\\beta_1}{2}(V_{\\text{out}}-T_1)^2.\n\\]\n\n### Input transistor \\(M_2\\)\n\nFor \\(M_2\\),\n\\[\nV_{SG2}=V_{DD}-V_{\\text{in}},\\qquad\nV_{SD2}=V_{DD}-V_{\\text{out}}.\n\\]\n\nIts operating regions are:\n\n| Region | Condition |\n|---|---|\n| Cutoff | \\(V_{\\text{in}}\\ge V_{DD}-T_2\\) |\n| Saturation, when on | \\(V_{\\text{out}}\\le V_{\\text{in}}+T_2\\) |\n| Triode, when on | \\(V_{\\text{out}}>V_{\\text{in}}+T_2\\) |\n\n### Voltage-transfer characteristic\n\nWhen **both transistors are saturated**, equating their currents gives\n\\[\n\\frac{\\beta_1}{2}(V_{\\text{out}}-T_1)^2\n=\n\\frac{\\beta_2}{2}(V_{DD}-V_{\\text{in}}-T_2)^2,\n\\]\nhence\n\\[\n\\boxed{\nV_{\\text{out}}\n=T_1+\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n\\left(V_{DD}-V_{\\text{in}}-T_2\\right)\n}\n\\]\nsubject to the saturation conditions above.\n\nAt low input voltages, \\(M_2\\) is normally in **triode**. The output is then obtained from\n\\[\n\\frac{\\beta_1}{2}(V_{\\text{out}}-T_1)^2\n=\n\\beta_2\\!\\left[\n(V_{DD}-V_{\\text{in}}-T_2)(V_{DD}-V_{\\text{out}})\n-\\frac{(V_{DD}-V_{\\text{out}})^2}{2}\n\\right].\n\\]\n\nWhen \\(V_{\\text{in}}\\ge V_{DD}-T_2\\), \\(M_2\\) switches off. \\(M_1\\) discharges an initially high output toward \\(T_1\\) in the abrupt-threshold model. Strictly, for\n\\[\n0\\le V_{\\text{out}}\\le T_1,\n\\]\nboth devices can be off, so the ideal model leaves the output undriven; leakage and subthreshold conduction determine its eventual voltage.\n\nThus, **increasing the input decreases the output**.\n\n## 2. Small-signal gain\n\nAt a bias point where both devices are saturated, \\(M_1\\) presents a small-signal conductance \\(g_{m1}+g_{o1}\\) to ground. Therefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-\\frac{g_{m2}}{g_{m1}+g_{o1}+g_{o2}}\n}\n\\]\n\nIf channel-length modulation is negligible,\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_{m2}}{g_{m1}}\n=-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n}\n\\]\nbecause both transistors carry the same DC current.\n\nAlso,\n\\[\nR_{\\text{out}}=\\frac{1}{g_{m1}+g_{o1}+g_{o2}},\n\\]\nand the ideal low-frequency input resistance is infinite. If \\(M_1\\)’s body is at a fixed potential, body effect adds \\(g_{mb1}\\) to these denominators.\n\nFor identical devices, the saturated branch reduces to\n\\[\nV_{\\text{out}}=V_{DD}-V_{\\text{in}},\\qquad A_v\\approx-1.\n\\]\n\n**Overall:** this is not a complementary CMOS inverter. It draws static current whenever both transistors conduct, its high output lies below \\(V_{DD}\\), and its diode-connected load does not strongly pull the output all the way to ground.",
        "format": "markdown",
        "sha256": "dd55e8f77f6359ee83111ee81bf48e10c7285c9924e3763363b67c04ef038508"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies both devices as PMOS, correctly treats M2 as the common-source input device and M1 as a diode-connected PMOS load, and gives the required gm/gm gain. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 10388,
        "total_tokens": 12066,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 10388,
        "total_tokens": 12066,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming both MOSFETs operate in saturation and neglecting body effect, \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are AC grounds. Thus \\(M_2\\) presents \\(r_{o2}\\) from node \\(X\\) to ground, while \\(M_1\\) acts as the cascode transistor.\n\nApply a test current \\(i_t\\) at the output:\n\\[\nv_x=i_t r_{o2},\\qquad\ni_t=\\frac{v_t-v_x}{r_{o1}}-g_{m1}v_x.\n\\]\n\nSubstitution gives\n\\[\n\\boxed{R_{\\text{out}}=\\frac{v_t}{i_t}\n=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}.\n\\]\n\nFor large intrinsic gain,\n\\[\n\\boxed{R_{\\text{out}}\\approx g_{m1}r_{o1}r_{o2}}.\n\\]\n\nIf body effect is included with the bulk AC-grounded, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).",
        "format": "markdown",
        "sha256": "898e92a0d3e21551e10b95349b95133e8c8d6665a6e0d3c20edd3bc852317fa7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the cascode device and gives the full output-resistance expression and its approximation. Omitting the PMOS labels is allowed by the full-credit rule.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2669,
        "output_tokens": 1770,
        "total_tokens": 4439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1511,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2669,
        "output_tokens": 1770,
        "total_tokens": 4439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1511,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume both PMOS devices are in saturation, and \\(V_{DD},V_{b1},V_{b2}\\) are AC grounds. **\\(M_1\\) is the cascode transistor.**\n\nApply a test current \\(i_t\\) into the output. Since \\(M_2\\)’s gate and source are AC-grounded,\n\\[\nv_X=i_t r_{o2}.\n\\]\nFor \\(M_1\\), neglecting body effect,\n\\[\ni_t=\\frac{v_t-v_X}{r_{o1}}-g_{m1}v_X.\n\\]\nSubstituting gives\n\\[\n\\boxed{R_{\\text{out}}=\\frac{v_t}{i_t}\n=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}.\n\\]\n\nFor large intrinsic gain,\n\\[\n\\boxed{R_{\\text{out}}\\approx g_{m1}r_{o1}r_{o2}}.\n\\]\n\nIf body effect is included with \\(M_1\\)’s bulk at AC ground, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).",
        "format": "markdown",
        "sha256": "59488033a87d1709c0a883a5cfb47d23bcb362b76cd3c931d0f3ea5bd2dce880"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the PMOS cascode and gives the correct output-resistance expression and approximation; treating body effect as optional is consistent with the solution.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 1812,
        "total_tokens": 4481,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 1812,
        "total_tokens": 4481,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume both transistors operate in saturation, with \\(V_{DD},V_{b1},V_{b2}\\) at AC ground, and neglect body effect.\n\n\\(M_1\\) is the **cascode transistor**, while \\(M_2\\) presents a small-signal resistance \\(r_{o2}\\) at node \\(X\\). Applying a test current \\(i_t\\) at the output,\n\\[\nv_x=i_t r_{o2},\\qquad\nv_{\\text{out}}=i_t r_{o1}+(1+g_{m1}r_{o1})v_x.\n\\]\n\nTherefore,\n\\[\n\\boxed{R_{\\text{out}}\n=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nFor large intrinsic gain,\n\\[\n\\boxed{R_{\\text{out}}\\approx g_{m1}r_{o1}r_{o2}}.\n\\]\n\nIf body effect is included with \\(M_1\\)'s body AC-grounded, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).",
        "format": "markdown",
        "sha256": "6237fb62e1bff238e2ed1ed2076224d3e382f9d9c2931abf8d61d339e3ee4a18"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the cascode device and gives the matching output-resistance expression and approximation. Body effect is appropriately optional.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 2324,
        "total_tokens": 4993,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 2324,
        "total_tokens": 4993,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_2\\) is a **PMOS**, so its saturation condition is\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP2}|.\n\\]\nHere \\(V_{SD2}=V_{DD}-V_X\\) and \\(V_{SG2}=V_{DD}-V_{b2}\\). Therefore,\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|}\n\\]\nor, equivalently, \\(V_{DD}-V_X\\ge V_{OV2}\\): leave at least one overdrive voltage across \\(M_2\\).\n\n**Use \\(V_{b1}\\) to keep node \\(X\\) sufficiently low.** At the desired bias current,\n\\[\nV_X=V_{b1}+V_{SG1}\n    =V_{b1}+|V_{TP1}|+V_{OV1}.\n\\]\nThus choose\n\\[\nV_{b1}+|V_{TP1}|+V_{OV1}\n\\le V_{b2}+|V_{TP2}|.\n\\]\nFor equal threshold magnitudes, this simplifies to\n\\[\n\\boxed{V_{b2}-V_{b1}\\ge V_{OV1}}.\n\\]\n\nAllow some margin rather than operating exactly at equality. Also ensure \\(M_2\\) is turned on: \\(V_{DD}-V_{b2}>|V_{TP2}|\\).",
        "format": "markdown",
        "sha256": "33e3d30507e015c05bef5ef7f4c15600d5a44619867e222808e44878e240dd1f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states M2’s PMOS saturation condition and relates X to Vb1, deriving the appropriate Vb1 constraint (including the equal-threshold form).",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 2381,
        "total_tokens": 4946,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 2381,
        "total_tokens": 4946,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_2\\) is a **PMOS**, with source at \\(V_{DD}\\) and drain at \\(V_X\\). For saturation, it must be on and satisfy\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP2}|.\n\\]\nSubstituting the node voltages,\n\\[\nV_{DD}-V_X\\ge V_{DD}-V_{b2}-|V_{TP2}|,\n\\]\nso the key requirement is\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|.}\n\\]\n\n**Use \\(V_{b1}\\) to keep node \\(X\\) sufficiently low.** Since\n\\[\nV_X=V_{b1}+V_{SG1},\n\\]\nchoose, at the intended bias current,\n\\[\nV_{b1}\\le V_{b2}+|V_{TP2}|-V_{SG1}.\n\\]\n\nFor equal threshold magnitudes, writing \\(V_{SG1}=|V_{TP}|+V_{\\mathrm{OV1}}\\), this simplifies to\n\\[\n\\boxed{V_{b2}-V_{b1}\\ge V_{\\mathrm{OV1}}.}\n\\]\n\nAllow some margin rather than operating exactly at equality. Also ensure \\(V_{DD}-V_{b2}>|V_{TP2}|\\), so \\(M_2\\) is turned on.",
        "format": "markdown",
        "sha256": "288574e4e063b05e8d4ea469695b59096a84a0ac13a65ef6b6c437e81b33edde"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives M2’s PMOS saturation condition and relates V_X to V_b1 through M1, deriving the equivalent overdrive condition V_b2−V_b1 ≥ V_OV1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 2023,
        "total_tokens": 4588,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1717,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 2023,
        "total_tokens": 4588,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1717,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_2\\) is a **PMOS**, so it must have enough source-to-drain voltage to remain in saturation:\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP2}|.\n\\]\nHere \\(V_{SD2}=V_{DD}-V_X\\) and \\(V_{SG2}=V_{DD}-V_{b2}\\). Therefore,\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|}.\n\\]\n\n**Use \\(V_{b1}\\) to keep node \\(X\\) below this limit.** At the desired bias current,\n\\[\nV_X=V_{b1}+V_{SG1},\n\\]\nso choose\n\\[\n\\boxed{V_{b1}\\le V_{b2}+|V_{TP2}|-V_{SG1}}.\n\\]\n\nIf both devices have equal threshold magnitudes, this simplifies to\n\\[\nV_{b2}-V_{b1}\\ge V_{\\mathrm{OV1}},\n\\qquad\nV_{\\mathrm{OV1}}=V_{SG1}-|V_{TP1}|.\n\\]\n\nIn practice, allow some margin rather than operating exactly at the saturation boundary. Also ensure \\(V_{DD}-V_{b2}>|V_{TP2}|\\), so \\(M_2\\) is turned on.",
        "format": "markdown",
        "sha256": "33b094e75ffe23ba0642835e6c0184df563b5e69ca8a4006a4b7dc14c8328cc4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, and relates VX to Vb1 to derive the required bias condition. The equal-threshold simplification is also correct.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 2883,
        "total_tokens": 5448,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 2883,
        "total_tokens": 5448,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS cascode amplifier**: \\(M_1\\) is the common-source input transistor, and \\(M_2\\) is a common-gate cascode transistor. The current source \\(I_1\\) supplies the bias current.\n\nAssume both MOSFETs operate in saturation, neglect body effect, and consider low-frequency operation.\n\n## 1. DC operating point and voltage headroom\n\nBecause the devices are in series,\n\\[\nI_{D1}=I_{D2}=I_1.\n\\]\n\nDefine the overdrive voltages\n\\[\nV_{OV1}=V_{\\text{in},Q}-V_{T1},\\qquad\nV_{OV2}=V_{b1}-V_{X,Q}-V_{T2}.\n\\]\n\nFor a square-law bias estimate,\n\\[\nI_1=\\frac{\\beta_1}{2}V_{OV1}^{2}\n   =\\frac{\\beta_2}{2}V_{OV2}^{2},\n\\qquad\n\\beta_i=\\mu_nC_{\\text{ox}}(W/L)_i.\n\\]\nThus,\n\\[\nV_{\\text{in},Q}=V_{T1}+\\sqrt{\\frac{2I_1}{\\beta_1}},\n\\qquad\nV_{X,Q}=V_{b1}-V_{T2}-\\sqrt{\\frac{2I_1}{\\beta_2}}.\n\\]\n\nThe saturation conditions are\n\\[\n\\underbrace{V_{X,Q}\\ge V_{OV1}}_{M_1},\n\\qquad\n\\underbrace{V_{\\text{out},Q}-V_{X,Q}\\ge V_{OV2}}_{M_2}.\n\\]\n\nConsequently,\n\\[\nV_{b1}\\ge V_{T2}+V_{OV2}+V_{OV1},\n\\qquad\nV_{\\text{out},Q}\\ge V_{b1}-V_{T2}.\n\\]\n\nWith the lowest permissible cascode bias, the minimum output voltage is approximately\n\\[\n\\boxed{V_{\\text{out,min}}=V_{OV1}+V_{OV2}}.\n\\]\n\nA practical current source also imposes an upper limit,\n\\[\nV_{\\text{out,max}}\\simeq V_{DD}-V_{\\text{compliance}}.\n\\]\nThe figure alone does not specify a numerical DC output voltage.\n\n## 2. Small-signal voltage gain\n\nLet \\(g_{mi}\\) and \\(r_{oi}\\) denote each transistor’s transconductance and output resistance. The fixed bias \\(V_{b1}\\) is AC ground, while an **ideal** current source \\(I_1\\) is an AC open circuit.\n\nTherefore, with no output load, the incremental drain current through both transistors is zero:\n\\[\ng_{m1}v_{\\text{in}}+\\frac{v_x}{r_{o1}}=0,\n\\]\n\\[\n-g_{m2}v_x+\\frac{v_{\\text{out}}-v_x}{r_{o2}}=0.\n\\]\n\nHence\n\\[\nv_x=-g_{m1}r_{o1}v_{\\text{in}},\n\\qquad\nv_{\\text{out}}=(1+g_{m2}r_{o2})v_x,\n\\]\ngiving\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-g_{m1}r_{o1}(1+g_{m2}r_{o2})\n}.\n\\]\n\nFor \\(g_{m2}r_{o2}\\gg1\\),\n\\[\n\\boxed{A_v\\approx -g_{m1}g_{m2}r_{o1}r_{o2}}.\n\\]\n\nThe negative sign indicates inversion: increasing the input tends to pull the output downward.\n\n## 3. Input and output resistance\n\nIgnoring gate leakage,\n\\[\n\\boxed{R_{\\text{in}}\\rightarrow\\infty}.\n\\]\n\nWith the input AC-grounded, the resistance looking into the drain of \\(M_2\\) is\n\\[\n\\boxed{\nR_{\\text{out}}\n=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n}.\n\\]\nUsually,\n\\[\nR_{\\text{out}}\\approx g_{m2}r_{o1}r_{o2}.\n\\]\n\nIf the bias current source has finite output resistance \\(R_I\\), the overall output resistance becomes \\(R_{\\text{out}}\\parallel R_I\\), and the usual high-\\(g_mr_o\\) gain approximation is\n\\[\nA_v\\approx-g_{m1}(R_{\\text{out}}\\parallel R_I).\n\\]\n\n**Main result:** cascoding greatly increases output resistance and voltage gain, but requires additional voltage headroom. If all output resistances are taken as infinite and no load is present, the idealized circuit has no finite low-frequency voltage gain.",
        "format": "markdown",
        "sha256": "888af78816bb6de7fd4be0bc97e4f5059e5ce8e5a7e4899fb6716c8cd392858e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the ideal-load gain −gm1ro1(1 + gm2ro2), equivalent to the golden expression with body effect omitted.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 5207,
        "total_tokens": 6509,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 5207,
        "total_tokens": 6509,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS cascode amplifier**:\n\n- \\(M_1\\): common-source input transistor.\n- \\(M_2\\): common-gate cascode transistor, biased by \\(V_{b1}\\).\n- \\(I_1\\): current-source load.\n\nAssume both MOSFETs operate in saturation, \\(V_{b1}\\) is fixed, and body effect and capacitances are neglected.\n\n## 1. DC operating conditions\n\nWith no load connected,\n\\[\nI_{D1}=I_{D2}=I_1.\n\\]\n\nDefine \\(V_{OVi}=V_{GSi}-V_{Ti}\\). Using the square-law model for approximate bias calculations,\n\\[\nV_{OVi}\\approx\\sqrt{\\frac{2I_1}{\\beta_i}},\n\\qquad\n\\beta_i=\\mu_nC_{\\mathrm{ox}}(W/L)_i.\n\\]\n\nThus,\n\\[\nV_{\\mathrm{IN}}\\approx V_{T1}+V_{OV1},\n\\qquad\nV_X\\approx V_{b1}-V_{T2}-V_{OV2}.\n\\]\n\nThe saturation requirements are\n\\[\n\\boxed{V_X\\ge V_{OV1}}\n\\]\nand\n\\[\n\\boxed{V_{\\mathrm{OUT}}\\ge V_X+V_{OV2}\n      =V_{b1}-V_{T2}}.\n\\]\n\nWith the lowest permissible bias at \\(X\\), the minimum output voltage is approximately\n\\[\nV_{\\mathrm{OUT,min}}=V_{OV1}+V_{OV2}.\n\\]\nThe practical upper output limit is determined by the compliance voltage of the current source.\n\n## 2. Small-signal voltage gain\n\nLet the transistor parameters be \\(g_{m1},g_{m2},r_{o1},r_{o2}\\). An **ideal DC current source is an open circuit in the small-signal model**.\n\nConsequently, with no output load, the incremental drain currents of both transistors are zero:\n\\[\ng_{m1}v_{\\mathrm{in}}+\\frac{v_x}{r_{o1}}=0,\n\\]\n\\[\n-g_{m2}v_x+\\frac{v_{\\mathrm{out}}-v_x}{r_{o2}}=0.\n\\]\n\nTherefore,\n\\[\nv_x=-g_{m1}r_{o1}v_{\\mathrm{in}},\n\\qquad\nv_{\\mathrm{out}}=(1+g_{m2}r_{o2})v_x,\n\\]\ngiving\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=-g_{m1}r_{o1}(1+g_{m2}r_{o2})\n}.\n\\]\n\nFor \\(g_{m2}r_{o2}\\gg1\\),\n\\[\n\\boxed{A_v\\approx-g_{m1}g_{m2}r_{o1}r_{o2}}.\n\\]\n\nFor identical devices, this becomes\n\\[\nA_v\\approx-(g_mr_o)^2.\n\\]\nThe negative sign indicates an **inverting** amplifier.\n\n## 3. Input and output resistances\n\nNeglecting gate leakage,\n\\[\n\\boxed{R_{\\mathrm{in}}\\approx\\infty}.\n\\]\n\nSetting the input signal to zero and applying a test source at the output gives the cascode output resistance\n\\[\n\\boxed{\nR_c=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n}\n\\]\nor, for large intrinsic gain,\n\\[\n\\boxed{R_c\\approx g_{m2}r_{o1}r_{o2}}.\n\\]\n\nIf the current source has finite output resistance \\(r_I\\), then\n\\[\nR_{\\mathrm{out}}=R_c\\parallel r_I,\n\\qquad\nA_v\\approx-g_{m1}(R_c\\parallel r_I).\n\\]\nThus, a low current-source output resistance can substantially limit the gain.\n\nIf body effect is included, replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\) in the gain and output-resistance formulas.\n\n**Main result:** Cascoding produces high voltage gain and output resistance, at the cost of additional voltage headroom. Finite \\(r_o\\) or output loading must be retained to obtain a finite gain; the completely ideal, zero-channel-length-modulation model does not uniquely fix the saturated DC output voltage.",
        "format": "markdown",
        "sha256": "2d14ad6b6741e6669579c78128fb7e77ada3d93e81b1603d4946b1b326f031bf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the ideal-current-source-load gain equivalent to the golden expression. The additional body-effect-free and output-resistance details are consistent.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 6591,
        "total_tokens": 7893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5626,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 6591,
        "total_tokens": 7893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5626,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS cascode amplifier**:\n\n- \\(M_1\\): common-source input transistor.\n- \\(M_2\\): common-gate cascode transistor, biased by \\(V_{b1}\\).\n- \\(I_1\\): current-source load.\n\nThe following low-frequency analysis assumes both MOSFETs are saturated and neglects body effect and parasitic capacitances.\n\n## 1. DC bias and operating range\n\nWith no external DC load,\n\\[\nI_{D1}=I_{D2}=I_1.\n\\]\n\nDefine \\(V_{OVi}=V_{GSi}-V_{Ti}\\). Using the square-law bias approximation,\n\\[\nV_{OVi}\\approx\\sqrt{\\frac{2I_1}{\\beta_i}},\n\\qquad\n\\beta_i=\\mu_n C_{\\mathrm{ox}}(W/L)_i.\n\\]\n\nConsequently,\n\\[\nV_{\\mathrm{in},Q}\\approx V_{T1}+V_{OV1},\n\\]\nand the intermediate-node voltage is\n\\[\n\\boxed{V_{X,Q}\\approx V_{b1}-V_{T2}-V_{OV2}}.\n\\]\n\nThe saturation conditions are\n\\[\n\\begin{aligned}\nM_1:&\\quad V_{X,Q}\\ge V_{OV1},\\\\\nM_2:&\\quad V_{\\mathrm{out},Q}-V_{X,Q}\\ge V_{OV2}.\n\\end{aligned}\n\\]\n\nThus, the cascode bias must satisfy\n\\[\nV_{b1}\\ge V_{T2}+V_{OV1}+V_{OV2},\n\\]\nand the output’s lower limit is\n\\[\n\\boxed{V_{\\mathrm{out,min}}\\approx V_{b1}-V_{T2}}.\n\\]\n\nWith the lowest permissible cascode bias, this becomes\n\\[\nV_{\\mathrm{out,min}}\\approx V_{OV1}+V_{OV2}.\n\\]\nA practical upper current source also requires compliance voltage, giving\n\\[\nV_{\\mathrm{out,max}}\\approx V_{DD}-V_{\\mathrm{comp}}.\n\\]\nThat compliance limit is not specified for the ideal source shown.\n\n## 2. Small-signal voltage gain\n\nLet \\(g_{mi}\\) and \\(r_{oi}\\) denote each transistor’s transconductance and output resistance. In small-signal analysis, \\(V_{DD}\\) and \\(V_{b1}\\) are AC ground, and the ideal current source is an open circuit.\n\nBecause the incremental current through the stack is zero,\n\\[\ng_{m1}v_{\\mathrm{in}}+\\frac{v_x}{r_{o1}}=0,\n\\]\nso\n\\[\nv_x=-g_{m1}r_{o1}v_{\\mathrm{in}}.\n\\]\n\nFor \\(M_2\\),\n\\[\n-g_{m2}v_x+\\frac{v_{\\mathrm{out}}-v_x}{r_{o2}}=0.\n\\]\n\nTherefore, the **unloaded voltage gain with an ideal current-source load** is\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=-g_{m1}r_{o1}\\left(1+g_{m2}r_{o2}\\right)\n}.\n\\]\n\nFor large intrinsic transistor gain,\n\\[\n\\boxed{A_v\\approx-g_{m1}g_{m2}r_{o1}r_{o2}}.\n\\]\n\nFor matched transistors, this is approximately\n\\[\nA_v\\approx-(g_mr_o)^2.\n\\]\nThe negative sign indicates inversion: increasing the input lowers the output.\n\n## 3. Input and output resistance\n\nThe MOS gate draws essentially no low-frequency current:\n\\[\n\\boxed{R_{\\mathrm{in}}\\approx\\infty}.\n\\]\n\nSetting the input signal to zero and applying a test source at the output gives\n\\[\n\\boxed{\nR_{\\mathrm{out}}\n=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n}.\n\\]\n\nTypically,\n\\[\nR_{\\mathrm{out}}\\approx g_{m2}r_{o1}r_{o2},\n\\]\nwhich is much larger than the output resistance of a single common-source transistor.\n\nIf the current-source load has finite output resistance \\(r_I\\), then\n\\[\nR_{\\mathrm{out,total}}=R_{\\mathrm{out}}\\parallel r_I,\n\\]\nand, in the high-intrinsic-gain limit,\n\\[\nA_v\\approx-g_{m1}\\left(R_{\\mathrm{out}}\\parallel r_I\\right).\n\\]\n\n**Main trade-off:** cascoding increases output resistance and voltage gain, but requires extra voltage headroom. A numerical operating point requires device parameters and bias values. If channel-length modulation is neglected entirely, the ideal saturated circuit does not uniquely determine its DC output voltage.",
        "format": "markdown",
        "sha256": "96a00790b8fd90f0c5baeeacaf9bd5fd1e220a411d4d3d24c83c919bf7dc3598"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the ideal-load gain equivalent to the golden expression with body effect omitted. The additional bias, headroom, and resistance analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 5387,
        "total_tokens": 6689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4339,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 5387,
        "total_tokens": 6689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4339,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—as drawn, it is not a cascode.** The transistor arrows are important:\n\n- **\\(M_1\\) is PMOS:** its source is the upper terminal connected to \\(M_2\\), and its drain is grounded. It therefore operates as a **common-drain (source-follower)** stage.\n- **\\(M_2\\) is NMOS:** its gate is held at \\(V_{b1}\\), so it operates as a **common-gate** stage.\n\nThus, the connection is **source-to-source**, giving a common-drain → common-gate cascade.\n\nA conventional cascode instead combines a **common-source input stage with a common-gate stage**, connecting the first transistor’s **drain** to the second transistor’s **source**. Replacing \\(M_1\\) with an NMOS whose source is grounded would give the usual NMOS cascode.",
        "format": "markdown",
        "sha256": "a6be0864f9434795ad000df52129012ded117fc175c61cfd6c337b9bce4167a0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower and M2 as common-gate, and explains that this is not the common-source/common-gate topology of a cascode. The output-resistance boost need not be discussed for this question.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 2647,
        "total_tokens": 4023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2455,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 2647,
        "total_tokens": 4023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2455,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not as drawn.** The arrows indicate that \\(M_1\\) is **PMOS** and \\(M_2\\) is **NMOS**, with their **sources connected together**.\n\n- \\(M_1\\)’s drain is grounded, so it forms a **common-drain (source-follower)** stage.\n- \\(M_2\\)’s gate is held at \\(V_{b1}\\), so it forms a **common-gate** stage.\n\nA cascode requires a **common-source stage feeding a common-gate stage**, not common-drain feeding common-gate. If \\(M_1\\) were replaced by an NMOS with its source grounded and drain connected to \\(M_2\\)’s source, the circuit would be a conventional cascode.",
        "format": "markdown",
        "sha256": "cf4b12a1b0212ac7db8c401c27c25953e6fdc0786420349ff5da8fb2e7389eed"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower with its drain grounded and M2 as common-gate, so the circuit is not a conventional cascode.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 2082,
        "total_tokens": 3458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1913,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 2082,
        "total_tokens": 3458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1913,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—as drawn, it is not a cascode.**\n\nThe transistor symbols show that:\n- \\(M_1\\) is a **PMOS**, with its **drain grounded** and its source connected to \\(M_2\\). It therefore operates as a **common-drain (source-follower)** stage.\n- \\(M_2\\) is a **common-gate** stage, assuming \\(V_{b1}\\) is a fixed bias.\n\nA cascode requires a **common-source stage feeding a common-gate stage**: the input transistor’s **drain** connects to the cascode transistor’s **source**. Here, the connection is **source-to-source**, so it is a common-drain/common-gate cascade, not a cascode.",
        "format": "markdown",
        "sha256": "02866447acf3d1243fae0bd683c2f22bb07adc9743ca955d8eb09d28c1d5f95b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower and M2 as a common-gate device, explaining why the connection is not a cascode.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 2234,
        "total_tokens": 3610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 2234,
        "total_tokens": 3610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect depends on the **voltage gain across a feedback capacitance**, not simply the amplifier’s overall gain. A capacitance \\(C_f\\) between the input and a node with gain \\(A_v\\) contributes an effective input capacitance\n\n\\[\nC_{\\text{in,Miller}}=C_f(1-A_v).\n\\]\n\nA large negative gain therefore produces a large apparent input capacitance.\n\nIn a cascode, the input common-source/common-emitter transistor drives a common-gate/common-base transistor. The upper transistor presents a low impedance at the intermediate drain/collector node, keeping its voltage swing small compared with the final output swing.\n\nConsequently:\n\n- The input transistor’s \\(C_{gd}\\) or \\(C_{bc}\\) sees only a small **local voltage gain**, often around \\(-1\\), rather than the cascode’s large overall gain. Its Miller multiplication is therefore modest.\n- The upper transistor’s gate/base is at AC ground, so its output capacitance does not directly feed the output signal back to the input.\n\nThus, a cascode achieves high overall voltage gain while largely isolating the input from the large output swing. This reduces effective input capacitance and improves bandwidth—the Miller effect is reduced, not completely eliminated.",
        "format": "markdown",
        "sha256": "59befdbdf2f565314475491c5e2ede8c022196612aa72c15f0204cc6fc083ccb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode intermediate node and the resulting local gain across the input transistor’s feedback capacitance, typically about −1 rather than the full stage gain. It also correctly notes that Miller effect is reduced, not eliminated; the extra output-capacitance comment is secondary.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2656,
        "total_tokens": 2675,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2392,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2656,
        "total_tokens": 2675,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2392,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** magnifies a capacitance connected between an amplifier’s input and an inverting output. Its effective input capacitance is\n\n\\[\nC_{\\text{Miller}}=C_f(1-A_v).\n\\]\n\nFor a common-source stage with a large negative gain, the gate–drain capacitance therefore appears as \\(C_{gd}(1+|A_v|)\\), potentially much larger than \\(C_{gd}\\) itself.\n\nIn a **cascode**, the upper common-gate transistor presents a low impedance to the drain of the lower, input transistor. Consequently:\n\n- The lower transistor’s drain has a **small voltage swing compared with the final output**.\n- Its \\(C_{gd}\\) connects the input to this low-swing internal node—not directly to the high-gain output.\n- The gain relevant to Miller multiplication is therefore only of order unity, rather than the large overall amplifier gain.\n\nFor example, with similar transistor transconductances, the lower transistor’s drain gain is approximately \\(-1\\), giving about \\(2C_{gd}\\), rather than \\(C_{gd}(1+|A_{\\text{overall}}|)\\).\n\nThe large output swing occurs at the upper transistor’s drain, while its gate is AC-grounded, so its gate–drain capacitance does not feed that swing back to the input.\n\n**Thus, a cascode preserves high overall gain while greatly reducing Miller-induced input capacitance, improving bandwidth.**",
        "format": "markdown",
        "sha256": "5dd4a64da3c834e5b09a7773fa4bdcd576a870c5b05f7ebdec4ae56fc2870b77"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance internal node and the resulting roughly −1 gain across the lower transistor’s Cgd, giving about 2Cgd rather than multiplication by the full stage gain. It also makes clear the effect is reduced, not eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1221,
        "total_tokens": 1240,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1221,
        "total_tokens": 1240,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect depends on the **voltage gain across a feedback capacitance**, not simply the amplifier’s overall gain.\n\nIn a common-source or common-emitter stage, the parasitic gate–drain or base–collector capacitance connects the input to a large, inverted output swing. Its effective input capacitance is\n\\[\nC_{\\text{Miller}}=C_f(1-A_v)\\approx C_f(1+|A_v|),\n\\]\nwhich can be much larger than \\(C_f\\).\n\nIn a **cascode**, the upper common-gate/common-base transistor presents a low impedance to the lower transistor’s drain/collector. Consequently:\n\n- The lower transistor’s drain/collector voltage varies only slightly, even when the final output swing is large.\n- The gain across its feedback capacitance is typically only of order unity, rather than the large overall gain.\n- The upper transistor’s feedback capacitance connects the output to its AC-grounded gate/base, rather than directly to the input.\n\nThus the feedback capacitance is not strongly Miller-multiplied, giving **lower effective input capacitance and greater bandwidth**. The effect is reduced, not necessarily eliminated; for matched devices, the lower stage’s gain is often approximately \\(-1\\), giving about \\(2C_f\\) rather than \\((1+|A_v|)C_f\\).",
        "format": "markdown",
        "sha256": "3675b45bbe4ba45ff263abef5cde5d2592044244f1821fae29fa4ad8919012ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the resulting roughly −1 gain at the lower transistor’s drain, so its feedback capacitance is multiplied by about 2 rather than by the full stage gain. It also correctly notes that the effect is reduced, not eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1320,
        "total_tokens": 1339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 1320,
        "total_tokens": 1339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS common-gate amplifier with a PMOS current-source load**:\n\n- \\(M_2\\): source driven by \\(V_{\\text{in}}\\), gate held at \\(V_{b1}\\), drain connected to \\(V_{\\text{out}}\\).\n- \\(M_1\\): PMOS load biased by \\(V_{b2}\\).\n\nAssume both transistors are in saturation and initially neglect body effect.\n\n## 1. DC bias and output range\n\nThe two transistors carry the same bias current. Neglecting channel-length modulation,\n\\[\nI_D=\n\\frac{\\beta_p}{2}\\left(V_{DD}-V_{b2}-|V_{TP}|\\right)^2\n=\n\\frac{\\beta_n}{2}\\left(V_{b1}-V_{\\text{in,DC}}-V_{TN}\\right)^2,\n\\]\nwhere \\(\\beta=\\mu C_{\\text{ox}}W/L\\). Thus \\(M_1\\) sets the bias current, and the source driving \\(V_{\\text{in}}\\) must sink that current.\n\nFor \\(M_2\\) to remain saturated,\n\\[\nV_{\\text{out}}-V_{\\text{in}}\n\\ge V_{b1}-V_{\\text{in}}-V_{TN},\n\\]\nso\n\\[\nV_{\\text{out}}\\ge V_{b1}-V_{TN}.\n\\]\n\nFor \\(M_1\\) to remain saturated,\n\\[\nV_{DD}-V_{\\text{out}}\n\\ge V_{DD}-V_{b2}-|V_{TP}|,\n\\]\nso\n\\[\nV_{\\text{out}}\\le V_{b2}+|V_{TP}|.\n\\]\n\nTherefore, the allowable output range is\n\\[\n\\boxed{V_{b1}-V_{TN}\\le V_{\\text{out}}\n\\le V_{b2}+|V_{TP}|.}\n\\]\n\nWith ideal, zero-channel-length-modulation devices, matching the currents does not uniquely determine the output voltage within this range. Finite output resistances determine the actual operating point.\n\n## 2. Small-signal voltage gain\n\nFor small signals, \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are AC grounds. Consequently, \\(M_1\\) contributes only its output resistance \\(r_{o1}\\).\n\nFor \\(M_2\\),\n\\[\nv_{gs2}=-v_{\\text{in}}.\n\\]\n\nKCL at the output gives\n\\[\n\\frac{v_{\\text{out}}}{r_{o1}}\n+\\frac{v_{\\text{out}}-v_{\\text{in}}}{r_{o2}}\n-g_{m2}v_{\\text{in}}=0.\n\\]\n\nHence,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_{m2}+1/r_{o2}}{1/r_{o1}+1/r_{o2}}\n}\n\\]\nor, when \\(g_{m2}r_{o2}\\gg1\\),\n\\[\n\\boxed{A_v\\approx +g_{m2}(r_{o1}\\parallel r_{o2}).}\n\\]\n\nThe gain is **positive**: increasing \\(V_{\\text{in}}\\) reduces \\(V_{GS2}\\), reducing the NMOS pull-down current and causing \\(V_{\\text{out}}\\) to rise.\n\n## 3. Input and output resistances\n\nWith the input voltage source set to zero, the output resistance is\n\\[\n\\boxed{R_{\\text{out}}=r_{o1}\\parallel r_{o2}.}\n\\]\n\nWith no external output load, the exact small-signal input resistance is\n\\[\n\\boxed{\nR_{\\text{in}}\n=\\frac{r_{o1}+r_{o2}}{1+g_{m2}r_{o2}}.\n}\n\\]\n\nFor \\(g_{m2}r_{o2}\\gg1\\),\n\\[\nR_{\\text{in}}\\approx\n\\frac{1+r_{o1}/r_{o2}}{g_{m2}}.\n\\]\nThus, for equal transistor output resistances, \\(R_{\\text{in}}\\approx2/g_{m2}\\). The familiar \\(1/g_m\\) approximation requires the effective drain-load resistance to be much smaller than \\(r_{o2}\\).\n\nIf the bulk of \\(M_2\\) is AC-grounded, include body effect by replacing \\(g_{m2}\\) with \\(g_{m2}+g_{mb2}\\) in the small-signal expressions.",
        "format": "markdown",
        "sha256": "1b916cb6801ec5eaf2a18f4e8deb8518ead7060563ee6f5dcd0481e367d72a80"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, and gives the positive gain and low input resistance with appropriate expressions. The additional bias and resistance details are consistent with the topology.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 7694,
        "total_tokens": 8918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 7694,
        "total_tokens": 8918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit function\n\n\\(M_1\\) is a **PMOS current-source load**, and \\(M_2\\) is an **NMOS common-gate amplifier**:\n\n- Input: source of \\(M_2\\)\n- Output: drain of \\(M_2\\)\n- Gate of \\(M_2\\): held at \\(V_{b1}\\)\n\nThe stage is **non-inverting**: increasing \\(V_{\\text{in}}\\) reduces \\(V_{GS2}\\), reducing \\(M_2\\)’s current and allowing \\(M_1\\) to raise \\(V_{\\text{out}}\\).\n\nThe following analysis assumes saturation operation, ideal bias voltages, and no external output load.\n\n## 2. DC bias and allowable output range\n\nNeglecting body effect, define the overdrive voltages\n\\[\nV_{OV1}=V_{DD}-V_{b2}-|V_{TP1}|,\\qquad\nV_{OV2}=V_{b1}-V_{\\text{in}}-V_{TN2}.\n\\]\nBoth must be positive.\n\nIgnoring channel-length modulation, the bias current satisfies\n\\[\nI_D\\simeq \\frac{\\beta_{p1}}{2}V_{OV1}^{\\,2}\n=\\frac{\\beta_{n2}}{2}V_{OV2}^{\\,2},\n\\]\nwhere \\(\\beta=\\mu C_{\\text{ox}}W/L\\). The circuit driving \\(V_{\\text{in}}\\) must sink this DC current.\n\nFor both devices to remain saturated,\n\\[\nV_{\\text{out}}-V_{\\text{in}}\\ge V_{OV2},\n\\qquad\nV_{DD}-V_{\\text{out}}\\ge V_{OV1}.\n\\]\nThus,\n\\[\n\\boxed{V_{b1}-V_{TN2}\\le V_{\\text{out}}\n\\le V_{b2}+|V_{TP1}|.}\n\\]\n\nIn the ideal \\(\\lambda=0\\) model, matching the two currents does not uniquely determine \\(V_{\\text{out}}\\) within this range. Finite output conductances or external circuitry determine the actual operating point.\n\n## 3. Small-signal voltage gain\n\nAt low frequencies, \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are AC grounds. Therefore, \\(M_1\\) contributes only its output resistance \\(r_{o1}\\).\n\nFor \\(M_2\\),\n\\[\nv_{gs2}=-v_{\\text{in}},\\qquad\nv_{ds2}=v_{\\text{out}}-v_{\\text{in}}.\n\\]\nIts small-signal drain current is\n\\[\ni_{d2}=-g_{m2}v_{\\text{in}}\n+\\frac{v_{\\text{out}}-v_{\\text{in}}}{r_{o2}}.\n\\]\n\nApplying KCL at the output gives\n\\[\n\\left(\\frac1{r_{o1}}+\\frac1{r_{o2}}\\right)v_{\\text{out}}\n=\n\\left(g_{m2}+\\frac1{r_{o2}}\\right)v_{\\text{in}}.\n\\]\n\nHence,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\left(g_{m2}+\\frac1{r_{o2}}\\right)\n(r_{o1}\\parallel r_{o2})\n}\n\\]\nand, for \\(g_{m2}r_{o2}\\gg1\\),\n\\[\n\\boxed{A_v\\approx +g_{m2}(r_{o1}\\parallel r_{o2}).}\n\\]\n\n## 4. Input and output resistances\n\nWith the input driven by an ideal voltage source,\n\\[\n\\boxed{R_{\\text{out}}=r_{o1}\\parallel r_{o2}.}\n\\]\n\nThe exact low-frequency input resistance, with only \\(M_1\\) loading the output, is\n\\[\n\\boxed{\nR_{\\text{in}}=\n\\frac{r_{o1}+r_{o2}}{1+g_{m2}r_{o2}}.\n}\n\\]\nThus, the active load can increase the input resistance above the familiar \\(1/g_m\\) estimate. For example, if \\(r_{o1}=r_{o2}\\) and \\(g_{m2}r_{o2}\\gg1\\),\n\\[\nR_{\\text{in}}\\approx \\frac{2}{g_{m2}}.\n\\]\n\nIf \\(M_2\\)’s body is AC-grounded and body effect is included, replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\) in the small-signal formulas.",
        "format": "markdown",
        "sha256": "6a9ac91aa0e6f98261f2106570f0b32fc2ce21d2f3ac317848721195438354b8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, source-driven input, bias voltages, non-inverting gain, and low input resistance. The gain expression is equivalent to the required approximation; the additional details are consistent.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 7829,
        "total_tokens": 9053,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 7829,
        "total_tokens": 9053,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-gate NMOS amplifier with a PMOS current-source load**:\n\n- \\(M_2\\): input applied to its source, gate held at \\(V_{b1}\\), output taken from its drain.\n- \\(M_1\\): PMOS biased by \\(V_{b2}\\), supplying the DC current and acting as an active load.\n\nAssume both devices operate in saturation, the bias voltages are ideal AC grounds, and body effect is initially neglected.\n\n## 1. DC operating conditions\n\nThe same DC current flows through both transistors. Neglecting channel-length modulation,\n\\[\nI_D \\approx\n\\frac{\\beta_1}{2}(V_{DD}-V_{b2}-|V_{TP}|)^2\n=\n\\frac{\\beta_2}{2}(V_{b1}-V_{\\text{in},Q}-V_{TN})^2,\n\\]\nwhere \\(\\beta_1=\\mu_pC_{\\rm ox}(W/L)_1\\) and \\(\\beta_2=\\mu_nC_{\\rm ox}(W/L)_2\\).\n\nBoth overdrive voltages must be positive. The saturation conditions are\n\\[\nV_{\\text{out},Q}-V_{\\text{in},Q}\n\\ge V_{b1}-V_{\\text{in},Q}-V_{TN},\n\\]\n\\[\nV_{DD}-V_{\\text{out},Q}\n\\ge V_{DD}-V_{b2}-|V_{TP}|.\n\\]\nThus the available output range is\n\\[\n\\boxed{V_{b1}-V_{TN}\\le V_{\\text{out},Q}\n\\le V_{b2}+|V_{TP}|.}\n\\]\n\n## 2. Small-signal voltage gain\n\nSince the gate and source of \\(M_1\\) are AC-grounded, its small-signal contribution is simply \\(r_{o1}\\). For \\(M_2\\),\n\\[\nv_{gs2}=-v_{\\text{in}}.\n\\]\n\nApplying KCL at the output gives\n\\[\n\\frac{v_{\\text{out}}}{r_{o1}}\n+\\frac{v_{\\text{out}}-v_{\\text{in}}}{r_{o2}}\n-g_{m2}v_{\\text{in}}=0.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\left(g_{m2}+\\frac{1}{r_{o2}}\\right)\n(r_{o1}\\parallel r_{o2})\n}\n\\]\nor, for \\(g_{m2}r_{o2}\\gg1\\),\n\\[\n\\boxed{A_v\\approx +g_{m2}(r_{o1}\\parallel r_{o2}).}\n\\]\n\nThe gain is **positive**: increasing \\(V_{\\text{in}}\\) reduces \\(V_{GS2}\\), reducing the current drawn by \\(M_2\\), so \\(V_{\\text{out}}\\) rises.\n\n## 3. Input and output resistances\n\nWith no external output load,\n\\[\n\\boxed{\nR_{\\text{in}}=\n\\frac{r_{o1}+r_{o2}}{1+g_{m2}r_{o2}}.\n}\n\\]\n\nFor large \\(g_{m2}r_{o2}\\),\n\\[\nR_{\\text{in}}\\approx\n\\frac{1+r_{o1}/r_{o2}}{g_{m2}}.\n\\]\nFor example, if \\(r_{o1}\\approx r_{o2}\\), then \\(R_{\\text{in}}\\approx 2/g_{m2}\\); it is not necessarily just \\(1/g_{m2}\\) because the drain is connected to a high-impedance load.\n\nWith the ideal input voltage source set to zero,\n\\[\n\\boxed{R_{\\text{out}}=r_{o1}\\parallel r_{o2}.}\n\\]\n\nIf \\(M_2\\)'s body is held at a fixed potential, include body effect by replacing \\(g_{m2}\\) with \\(g_{m2}+g_{mb2}\\) in the gain and input-resistance expressions.",
        "format": "markdown",
        "sha256": "8d9604834b301fd2342edbab674e47fd758d3026754cbd811343d82d5d9ed3ed"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, identifies the bias voltages, and gives the positive gain ≈ gm2(ro1 || ro2) and low input resistance. The additional expressions are consistent with the stated assumptions.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 6597,
        "total_tokens": 7821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 6597,
        "total_tokens": 7821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**, corresponding to its two independent dynamic nodes:\n\n1. The gate of \\(M_1\\), after \\(R_S\\).\n2. The output node \\(V_{\\text{out}}\\).\n\nBecause \\(M_2\\)’s gate and source are AC-grounded, \\(C_{GD2}\\), \\(C_{DB2}\\), and \\(C_{DB}\\) are all shunt capacitances at the output. \\(C_{GD}\\) couples the two existing nodes but creates no additional independent state. Thus, \\(V_{\\text{out}}/V_{\\text{in}}\\) has a second-order denominator.",
        "format": "markdown",
        "sha256": "b3285ae009540a2c13fb3f8e09b4251673160ad7f9cacc79157a149874ec6614"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two dynamic nodes, places the listed shunt capacitances at the output, and explains that CGD couples the nodes without adding another independent state.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 1044,
        "total_tokens": 2785,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 905,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 1044,
        "total_tokens": 2785,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 905,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **\\(\\boxed{2\\text{ poles}}\\)**, corresponding to two independent capacitive nodes:\n\n1. **The gate of \\(M_1\\)**, after \\(R_S\\).\n2. **The output node**, at the common drains of \\(M_1\\) and \\(M_2\\).\n\nAt the output, \\(C_{DB}\\), \\(C_{DB2}\\), and \\(C_{GD2}\\) are all connected to AC ground and therefore combine in parallel. \\(C_{GD}\\) couples the input and output nodes but does **not** create another independent node.\n\nThus, the transfer-function denominator is second order.",
        "format": "markdown",
        "sha256": "b0d003f4ced68dc4ead647287c5046aedfe066ce313511b59714f0a62726a2f1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent nodes—the M1 gate and output—and assigns the output capacitances correctly. It also recognizes that CGD couples the nodes without creating a third pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 1228,
        "total_tokens": 2969,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1085,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 1228,
        "total_tokens": 2969,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1085,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**, since it has two independent capacitive nodes:\n\n1. **The gate of \\(M_1\\)**, connected to \\(C_{GS}\\) and \\(C_{GD}\\).\n2. **The output node**, where \\(C_{DB}\\), \\(C_{DB2}\\), and \\(C_{GD2}\\) all connect to AC ground and act in parallel.\n\n\\(C_{GD}\\) couples these two nodes but does not create another independent state. Thus, the small-signal transfer function generally has a **second-order denominator**.",
        "format": "markdown",
        "sha256": "df2df59b6d3b15824dcb84c0d5b503aa93356db45c6bf423e051c65f8c0bf851"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent capacitive nodes and assigns the capacitors to the right nodes; the coupling capacitor does not add another pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 1062,
        "total_tokens": 2803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 938,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 1062,
        "total_tokens": 2803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 938,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **resistor-loaded NMOS inverter/common-source stage with two series transistors whose gates are tied together**. The key point is that the two transistors cannot both operate in saturation if they have the same threshold voltage.\n\nAssume long-channel devices, a common threshold \\(V_T\\), and neglect body effect and channel-length modulation. Define\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}\\frac{W_i}{L_i},\n\\qquad U=V_{\\mathrm{in}}-V_T,\n\\]\nand let \\(V_X\\) be the node between \\(M_1\\) and \\(M_2\\).\n\n## 1. Operating regions\n\nFor \\(M_2\\) to conduct,\n\\[\nV_{GS2}=V_{\\mathrm{in}}-V_X>V_T\n\\quad\\Rightarrow\\quad V_X<U.\n\\]\nBut saturation of \\(M_1\\) would require \\(V_X\\ge U\\). Therefore, whenever the stack conducts,\n\\[\n\\boxed{M_1\\text{ operates in triode}.}\n\\]\n\nThe operating regions are:\n\n- **\\(U\\le0\\):** the stack is off, so \\(I_D=0\\) and \\(V_{\\mathrm{out}}=V_{DD}\\).\n- **\\(U>0,\\ V_{\\mathrm{out}}\\ge U\\):** \\(M_1\\) is in triode and \\(M_2\\) is in saturation.\n- **\\(0\\le V_{\\mathrm{out}}<U\\):** both devices are in triode.\n\n## 2. DC transfer characteristic\n\nIn the useful amplifier region, \\(M_2\\) is saturated. Equating the two drain currents gives\n\\[\nI_D\n=\\beta_1\\left(UV_X-\\frac{V_X^2}{2}\\right)\n=\\frac{\\beta_2}{2}(U-V_X)^2.\n\\]\n\nSolving,\n\\[\nV_X=U\\left(1-\\sqrt{\\frac{\\beta_1}{\\beta_1+\\beta_2}}\\right).\n\\]\n\nDefine an effective device parameter\n\\[\n\\boxed{\\beta_{\\mathrm{eq}}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}}.\n\\]\nThen\n\\[\n\\boxed{I_D=\\frac{\\beta_{\\mathrm{eq}}}{2}(V_{\\mathrm{in}}-V_T)^2}\n\\]\nand hence\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{DD}-\\frac{\\beta_{\\mathrm{eq}}R_D}{2}\n(V_{\\mathrm{in}}-V_T)^2\n}.\n\\]\nThis expression is valid while \\(V_{\\mathrm{out}}\\ge V_{\\mathrm{in}}-V_T\\).\n\nFor **identical devices**, \\(\\beta_1=\\beta_2=\\beta\\):\n\\[\n\\boxed{\nV_X=\\left(1-\\frac1{\\sqrt2}\\right)U\\approx0.293U,\n\\qquad\nI_D=\\frac{\\beta}{4}U^2\n}.\n\\]\n\nWhen the input is high enough that both devices enter triode, the current becomes\n\\[\nI_D=\\beta_{\\mathrm{eq}}\n\\left(UV_{\\mathrm{out}}-\\frac{V_{\\mathrm{out}}^2}{2}\\right),\n\\]\nwhich must be solved together with\n\\[\nI_D=\\frac{V_{DD}-V_{\\mathrm{out}}}{R_D}.\n\\]\nThese equations describe the remaining portion of the DC transfer curve.\n\n## 3. Small-signal voltage gain\n\nAt a bias point where \\(M_2\\) is saturated,\n\\[\ng_{m,\\mathrm{eq}}\n=\\frac{\\partial I_D}{\\partial V_{\\mathrm{in}}}\n=\\beta_{\\mathrm{eq}}(V_{\\mathrm{in},Q}-V_T).\n\\]\n\nThus the unloaded, low-frequency gain is\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=-g_{m,\\mathrm{eq}}R_D\n=-\\beta_{\\mathrm{eq}}(V_{\\mathrm{in},Q}-V_T)R_D\n}.\n\\]\n\nFor identical devices,\n\\[\n\\boxed{A_v=-\\frac{\\beta}{2}(V_{\\mathrm{in},Q}-V_T)R_D}.\n\\]\n\nUnder the ideal assumptions,\n\\[\nR_{\\mathrm{in}}\\rightarrow\\infty,\n\\qquad R_{\\mathrm{out}}=R_D.\n\\]\n\n**Interpretation:** two identical devices of dimensions \\(W/L\\) behave ideally like one device of dimensions \\(W/(2L)\\). This is not a conventional cascode with two saturated transistors; the lower transistor is in triode. Body effect and channel-length modulation modify these ideal results.",
        "format": "markdown",
        "sha256": "24bf6683938c02100c7410361a5e05a02b39edba3c1102bf00a2947887083fe2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS stack, places the lower device in triode and the upper in saturation, and concludes that identical devices behave like one device with twice the channel length. The ideal-model derivation supports the central result.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 9753,
        "total_tokens": 11181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8722,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 9753,
        "total_tokens": 11181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8722,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **inverting, resistively loaded NMOS stage** whose two transistors share the same gate voltage. The key point is that **the two devices cannot both operate in saturation**.\n\nAssume long-channel NMOS devices with a common threshold \\(V_T\\), neglecting body effect and channel-length modulation. Define\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}\\frac{W_i}{L_i},\n\\qquad U=V_{\\mathrm{in}}-V_T,\n\\]\nand let \\(V_X\\) be the junction voltage between \\(M_1\\) and \\(M_2\\).\n\n## 1. Operating regions\n\nFor \\(M_2\\) to conduct,\n\\[\nV_{GS2}=V_{\\mathrm{in}}-V_X>V_T\n\\quad\\Rightarrow\\quad V_X<U.\n\\]\n\nHowever, saturation of \\(M_1\\) would require\n\\[\nV_{DS1}=V_X\\ge V_{\\mathrm{in}}-V_T=U.\n\\]\n\nThese conditions contradict each other. Therefore, whenever both transistors conduct,\n\\[\n\\boxed{M_1\\text{ operates in triode}.}\n\\]\n\nFor \\(M_2\\), the saturation condition is\n\\[\nV_{\\mathrm{out}}-V_X\\ge V_{\\mathrm{in}}-V_X-V_T,\n\\]\nor simply\n\\[\n\\boxed{V_{\\mathrm{out}}\\ge U.}\n\\]\n\nThus, in the usual amplifying region, **\\(M_1\\) is in triode and \\(M_2\\) is saturated**.\n\n## 2. DC current and output voltage\n\nWith \\(M_2\\) saturated, the common drain current satisfies\n\\[\nI_D=\\beta_1\\left(UV_X-\\frac{V_X^2}{2}\\right)\n=\\frac{\\beta_2}{2}(U-V_X)^2.\n\\]\n\nSolving,\n\\[\nV_X=U\\left(1-\\sqrt{\\frac{\\beta_1}{\\beta_1+\\beta_2}}\\right),\n\\]\nand\n\\[\n\\boxed{I_D=\\frac{\\beta_{\\mathrm{eq}}}{2}U^2},\n\\qquad\n\\boxed{\\beta_{\\mathrm{eq}}\n=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}}.\n\\]\n\nThe output voltage is consequently\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{DD}-\\frac{\\beta_{\\mathrm{eq}}R_D}{2}\n(V_{\\mathrm{in}}-V_T)^2\n}\n\\]\nprovided \\(V_{\\mathrm{out}}\\ge V_{\\mathrm{in}}-V_T>0\\).\n\n### Identical transistors\n\nIf \\(\\beta_1=\\beta_2=\\beta\\),\n\\[\nV_X=\\left(1-\\frac{1}{\\sqrt2}\\right)(V_{\\mathrm{in}}-V_T),\n\\]\n\\[\nI_D=\\frac{\\beta}{4}(V_{\\mathrm{in}}-V_T)^2,\n\\]\nand\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{DD}-\\frac{\\beta R_D}{4}(V_{\\mathrm{in}}-V_T)^2.\n}\n\\]\n\nIdeally, two identical devices of dimensions \\(W/L\\) therefore behave like **one NMOS of dimensions \\(W/(2L)\\)**.\n\n## 3. Other portions of the DC transfer characteristic\n\n- **Cutoff:** If \\(V_{\\mathrm{in}}\\le V_T\\), then \\(I_D\\approx0\\) and\n  \\[\n  \\boxed{V_{\\mathrm{out}}\\approx V_{DD}.}\n  \\]\n\n- **Both devices in triode:** If \\(0\\le V_{\\mathrm{out}}<U\\), the equivalent current is\n  \\[\n  I_D=\\beta_{\\mathrm{eq}}\n  \\left(UV_{\\mathrm{out}}-\\frac{V_{\\mathrm{out}}^2}{2}\\right).\n  \\]\n  Together with\n  \\[\n  I_D=\\frac{V_{DD}-V_{\\mathrm{out}}}{R_D},\n  \\]\n  this determines the low-output-voltage branch.\n\n## 4. Small-signal voltage gain\n\nAt a bias point where \\(M_2\\) is saturated,\n\\[\ng_{m,\\mathrm{eq}}\n=\\frac{\\partial I_D}{\\partial V_{\\mathrm{in}}}\n=\\beta_{\\mathrm{eq}}(V_{\\mathrm{in},Q}-V_T).\n\\]\n\nHence,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=-\\beta_{\\mathrm{eq}}(V_{\\mathrm{in},Q}-V_T)R_D.\n}\n\\]\n\nFor identical devices,\n\\[\n\\boxed{A_v=-\\frac{\\beta}{2}(V_{\\mathrm{in},Q}-V_T)R_D.}\n\\]\n\nThe ideal low-frequency input resistance is infinite, and the output resistance is \\(R_D\\) under the assumed model. This is **not a conventional two-saturated-transistor cascode**; its ideal behavior is that of a longer-channel common-source device.",
        "format": "markdown",
        "sha256": "44b84705da4e90e82701d080e3d2769aa785605d0ede722a21fde4bae1408f36"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS stack, with M1 in triode and M2 saturated, and concludes that identical devices behave like one with twice the channel length. Its ideal-model simplifications do not undermine the essential conclusion.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 8475,
        "total_tokens": 9903,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 8475,
        "total_tokens": 9903,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **resistor-loaded NMOS inverting stage** with two series transistors whose gates are tied together.\n\nFor a symbolic analysis, assume long-channel devices with the same threshold \\(V_T\\), neglect body effect and channel-length modulation, and define\n\\[\n\\beta_i=\\mu_nC_{\\mathrm{ox}}\\left(\\frac WL\\right)_i.\n\\]\nLet \\(V_X\\) be the junction voltage between \\(M_1\\) and \\(M_2\\).\n\n## 1. Operating regions\n\nIf \\(V_{\\mathrm{in}}\\le V_T\\), the pull-down stack is off:\n\\[\n\\boxed{I_D=0,\\qquad V_{\\mathrm{out}}=V_{DD}.}\n\\]\n\nFor \\(V_{\\mathrm{in}}>V_T\\), define the input overdrive\n\\[\nu=V_{\\mathrm{in}}-V_T.\n\\]\n\nFor \\(M_2\\) to conduct,\n\\[\nV_{GS2}>V_T\n\\quad\\Rightarrow\\quad\nV_X<u.\n\\]\nBut saturation of \\(M_1\\) would require \\(V_X\\ge u\\). Therefore:\n\n> **When the stack conducts, \\(M_1\\) is in triode—not saturation.**\n\nThe upper transistor \\(M_2\\) is saturated when\n\\[\nV_{\\mathrm{out}}-V_X\\ge u-V_X\n\\quad\\Rightarrow\\quad\n\\boxed{V_{\\mathrm{out}}\\ge u.}\n\\]\n\n## 2. DC analysis with \\(M_2\\) saturated\n\nThe same current flows through both devices:\n\\[\nI_D\n=\\beta_1\\left(uV_X-\\frac{V_X^2}{2}\\right)\n=\\frac{\\beta_2}{2}(u-V_X)^2.\n\\]\n\nSolving,\n\\[\nV_X=u\\left(1-\\sqrt{\\frac{\\beta_1}{\\beta_1+\\beta_2}}\\right).\n\\]\n\nDefine\n\\[\n\\boxed{\\beta_{\\mathrm{eq}}\n=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}.}\n\\]\nThen\n\\[\n\\boxed{I_D=\\frac{\\beta_{\\mathrm{eq}}}{2}(V_{\\mathrm{in}}-V_T)^2}\n\\]\nand\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{DD}-\\frac{\\beta_{\\mathrm{eq}}R_D}{2}\n(V_{\\mathrm{in}}-V_T)^2\n}\n\\]\nprovided \\(V_{\\mathrm{out}}\\ge V_{\\mathrm{in}}-V_T\\).\n\n### Identical transistors\n\nFor \\(\\beta_1=\\beta_2=\\beta\\),\n\\[\n\\beta_{\\mathrm{eq}}=\\frac{\\beta}{2},\\qquad\nV_X=\\left(1-\\frac{1}{\\sqrt2}\\right)u\\approx0.293u,\n\\]\nso\n\\[\n\\boxed{\nI_D=\\frac{\\beta}{4}u^2,\\qquad\nV_{\\mathrm{out}}=V_{DD}-\\frac{\\beta R_D}{4}u^2.\n}\n\\]\n\nWithin this model, the identical-device stack behaves like **one NMOS of the same width and twice the channel length**.\n\n## 3. Small-signal voltage gain\n\nAround a bias point in the above region,\n\\[\nA_v=\\frac{dv_{\\mathrm{out}}}{dv_{\\mathrm{in}}}\n=-R_D\\frac{dI_D}{dV_{\\mathrm{in}}},\n\\]\nhence\n\\[\n\\boxed{\nA_v=-\\beta_{\\mathrm{eq}}R_D(V_{\\mathrm{in}}-V_T).\n}\n\\]\n\nFor identical devices,\n\\[\n\\boxed{\nA_v=-\\frac{\\beta R_D}{2}(V_{\\mathrm{in}}-V_T).\n}\n\\]\n\nThe negative sign indicates inversion. Ideally, the low-frequency input resistance is infinite, and the output resistance in this region is \\(R_D\\).\n\n## 4. Large-input region\n\nIf the output falls below \\(u\\), \\(M_2\\) also enters triode. Both devices then satisfy the equivalent-transistor relation\n\\[\nI_D=\\beta_{\\mathrm{eq}}\n\\left(uV_{\\mathrm{out}}-\\frac{V_{\\mathrm{out}}^2}{2}\\right).\n\\]\nThus the output is found from\n\\[\n\\boxed{\n\\frac{V_{DD}-V_{\\mathrm{out}}}{R_D}\n=\n\\beta_{\\mathrm{eq}}\n\\left[(V_{\\mathrm{in}}-V_T)V_{\\mathrm{out}}\n-\\frac{V_{\\mathrm{out}}^2}{2}\\right].\n}\n\\]\n\nSo the transfer characteristic starts at \\(V_{DD}\\), decreases as the input rises, and approaches ground for sufficiently strong gate drive. Numerical results require \\(V_{DD}\\), \\(R_D\\), and the transistor parameters.",
        "format": "markdown",
        "sha256": "86a24abc2b00581984533973c1314deac25505ffa0b68eac6b7c09b77bddb805"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS stack, with M1 in triode and M2 saturated, and derives the key result that identical devices behave approximately like one NMOS with twice the channel length. The added analysis is consistent with its stated long-channel assumptions.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 7787,
        "total_tokens": 9215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 7787,
        "total_tokens": 9215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS differential pair with a single-ended output**, with one input fixed at \\(V_b\\). Equivalently, \\(M_1\\) acts as a loaded source follower driving the common-gate transistor \\(M_2\\). Its voltage gain is **non-inverting**.\n\nAssume an ideal tail-current source \\(I_1\\), a fixed \\(V_b\\), and both MOSFETs operating in saturation. Initially neglect channel-length modulation and body effect.\n\n## 1. DC operating point\n\nThe branch currents satisfy\n\\[\nI_{D1}+I_{D2}=I_1,\n\\qquad\nV_{\\text{out}}=V_{DD}-I_{D2}R_D.\n\\]\n\nFor matched transistors biased with \\(V_{\\text{in,DC}}=V_b\\),\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2},\n\\]\nso\n\\[\n\\boxed{V_{\\text{out},Q}=V_{DD}-\\frac{I_1R_D}{2}}.\n\\]\n\nThe common-source voltage is\n\\[\nV_{S,Q}=V_b-V_T-V_{\\text{OV}},\n\\]\nwhere \\(V_{\\text{OV}}\\) is the overdrive needed to conduct \\(I_1/2\\).\n\n## 2. Small-signal voltage gain\n\nLet \\(v_s\\) be the small-signal voltage at the common-source node. An ideal current source carries **no small-signal current**, so\n\\[\ng_{m1}(v_{\\text{in}}-v_s)+g_{m2}(0-v_s)=0.\n\\]\nTherefore,\n\\[\nv_s=\\frac{g_{m1}}{g_{m1}+g_{m2}}v_{\\text{in}}.\n\\]\n\nThe change in \\(M_2\\)'s drain current is\n\\[\ni_{d2}=-g_{m2}v_s,\n\\]\nand \\(v_{\\text{out}}=-R_Di_{d2}\\). Hence\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D\n}.\n\\]\n\nFor equal transconductances,\n\\[\n\\boxed{A_v=+\\frac{g_mR_D}{2}}.\n\\]\n\nThe positive sign follows physically: increasing \\(V_{\\text{in}}\\) steers more tail current into \\(M_1\\), reducing \\(I_{D2}\\), reducing the drop across \\(R_D\\), and raising \\(V_{\\text{out}}\\).\n\n## 3. Impedances and operating limits\n\nIgnoring transistor output resistance,\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty,\\qquad R_{\\text{out}}\\approx R_D}.\n\\]\n\nFor large input excursions, the pair steers essentially all the tail current into one branch:\n\n- \\(V_{\\text{in}}\\) sufficiently above \\(V_b\\): \\(M_2\\) turns off and \\(V_{\\text{out}}\\to V_{DD}\\).\n- \\(V_{\\text{in}}\\) sufficiently below \\(V_b\\): \\(M_1\\) turns off and \\(V_{\\text{out}}\\to V_{DD}-I_1R_D\\).\n\nThus the ideal current-steering range is\n\\[\nV_{DD}-I_1R_D\\le V_{\\text{out}}\\le V_{DD}.\n\\]\n\nThe gain expression requires both transistors to remain on and saturated. In particular,\n\\[\nM_2:\\quad V_{\\text{out}}\\ge V_b-V_T,\n\\qquad\nM_1:\\quad V_{DD}\\ge V_{\\text{in}}-V_T,\n\\]\nand the tail source must have sufficient voltage headroom.\n\n**Finite-\\(r_o\\) correction:** For equal small-signal \\(g_m\\) and \\(r_o\\), with an ideal tail source,\n\\[\nR_{\\text{out}}=R_D\\parallel 2r_o,\n\\qquad\nA_v=\\frac{g_m}{2}\\left(R_D\\parallel 2r_o\\right).\n\\]",
        "format": "markdown",
        "sha256": "59d60c9b04d65e169414cc25131b0cd1b89c75e2b9bc623ecb07812f8b7145a0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair (equivalently, M1 driving M2 as a common-gate stage) and gives the correct non-inverting gain and signal-path explanation.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 11785,
        "total_tokens": 14080,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 11785,
        "total_tokens": 14080,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **noninverting, single-ended NMOS differential amplifier**. \\(M_1\\) and \\(M_2\\) share the tail current \\(I_1\\), with \\(V_b\\) serving as the reference input.\n\nAssume initially that both transistors are saturated, the tail current source is ideal, and channel-length modulation and body effect are negligible.\n\n## 1. DC operating point\n\nAt the common-source node,\n\\[\nI_{D1}+I_{D2}=I_1,\n\\]\nand the output voltage is\n\\[\n\\boxed{V_{\\text{out}}=V_{DD}-I_{D2}R_D.}\n\\]\n\nFor matched transistors biased at \\(V_{\\text{in},Q}=V_b\\),\n\\[\nI_{D1,Q}=I_{D2,Q}=\\frac{I_1}{2},\n\\qquad\n\\boxed{V_{\\text{out},Q}=V_{DD}-\\frac{I_1R_D}{2}.}\n\\]\n\nUsing \\(I_D=\\tfrac12\\beta V_{\\text{OV}}^2\\), where \\(\\beta=\\mu_nC_{\\text{ox}}W/L\\),\n\\[\nV_{\\text{OV}}=\\sqrt{\\frac{I_1}{\\beta}},\\qquad\nV_{S,Q}=V_b-V_T-V_{\\text{OV}},\n\\]\nand each transistor has\n\\[\ng_m=\\beta V_{\\text{OV}}=\\sqrt{\\beta I_1}.\n\\]\n\n## 2. Small-signal voltage gain\n\nFor small signals, \\(V_{DD}\\) and \\(V_b\\) are AC ground, while the ideal tail current source is an **open circuit**.\n\nLet \\(v_s\\) be the common-source signal voltage. Since the incremental drain currents must sum to zero,\n\\[\ng_{m1}(v_{\\text{in}}-v_s)-g_{m2}v_s=0.\n\\]\nThus,\n\\[\nv_s=\\frac{g_{m1}}{g_{m1}+g_{m2}}v_{\\text{in}}.\n\\]\n\nThe current change in \\(M_2\\) is\n\\[\ni_{d2}=-g_{m2}v_s,\n\\]\nso\n\\[\nv_{\\text{out}}=-R_Di_{d2}.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D.\n}\n\\]\n\nFor matched devices at equal bias currents,\n\\[\n\\boxed{A_v=+\\frac{g_mR_D}{2}.}\n\\]\n\nThe positive sign follows intuitively: increasing \\(V_{\\text{in}}\\) raises the common-source voltage, reducing \\(M_2\\)'s current and therefore raising \\(V_{\\text{out}}\\).\n\n## 3. Impedances and operating limits\n\nIgnoring capacitances and channel-length modulation,\n\\[\n\\boxed{R_{\\text{in}}\\rightarrow\\infty,\\qquad R_{\\text{out}}\\approx R_D.}\n\\]\n\nIf finite, equal transistor output resistances \\(r_o\\) are included in the matched small-signal model,\n\\[\nR_{\\text{out}}=R_D\\parallel 2r_o,\n\\qquad\nA_v=\\frac{g_m}{2}(R_D\\parallel 2r_o).\n\\]\n\nThe ideal current-steering limits are\n\\[\nV_{\\text{out}}\\rightarrow\n\\begin{cases}\nV_{DD}-I_1R_D, & M_1\\text{ off},\\\\[2mm]\nV_{DD}, & M_2\\text{ off}.\n\\end{cases}\n\\]\n\nThese limits are subject to voltage headroom. In particular, the saturation conditions are\n\\[\n\\boxed{V_{\\text{out}}\\ge V_b-V_T}\n\\quad(M_2),\n\\qquad\n\\boxed{V_{DD}\\ge V_{\\text{in}}-V_T}\n\\quad(M_1),\n\\]\nand the tail current source must retain sufficient compliance voltage.",
        "format": "markdown",
        "sha256": "5ab0dd5984f5d349bd015a981bf9e52ffc95b383837fd1358248a6e3fb275a5c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a noninverting, single-ended source-coupled differential pair, with M2’s gate biased at Vb, and derives the correct positive gain. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 7114,
        "total_tokens": 9409,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 7114,
        "total_tokens": 9409,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **source-coupled NMOS pair with a single-ended, noninverting output**. \\(M_1\\) controls the common-source voltage, while \\(M_2\\) converts that voltage into an output-current change.\n\nAssume an ideal tail-current source \\(I_1\\), constant \\(V_b\\) and \\(V_{DD}\\), and transistors operating in saturation. Initially neglect channel-length modulation and body effect.\n\n## 1. DC operating point\n\nLet the common-source voltage be \\(V_S\\). Then\n\\[\nI_{D1}+I_{D2}=I_1,\n\\qquad\nV_{\\text{out}}=V_{DD}-I_{D2}R_D.\n\\]\n\nFor matched transistors biased at \\(V_{\\text{in,Q}}=V_b\\),\n\\[\nI_{D1,Q}=I_{D2,Q}=\\frac{I_1}{2},\n\\]\nso\n\\[\n\\boxed{V_{\\text{out,Q}}=V_{DD}-\\frac{I_1R_D}{2}}.\n\\]\n\nUsing \\(I_D=\\tfrac12\\beta(V_{GS}-V_T)^2\\), where\n\\(\\beta=\\mu_nC_{\\text{ox}}W/L\\),\n\\[\nV_{\\text{OV}}=\\sqrt{\\frac{I_1}{\\beta}},\n\\qquad\nV_{S,Q}=V_b-V_T-V_{\\text{OV}}.\n\\]\nEach transistor then has\n\\[\ng_m=\\frac{2I_{D,Q}}{V_{\\text{OV}}}\n=\\sqrt{\\beta I_1}.\n\\]\n\n## 2. Small-signal voltage gain\n\nFor small signals, \\(V_{DD}\\) and \\(V_b\\) are AC ground, and the ideal current source carries no incremental current. With \\(v_s\\) denoting the common-source signal,\n\\[\ni_{d1}=g_{m1}(v_{\\text{in}}-v_s),\n\\qquad\ni_{d2}=-g_{m2}v_s.\n\\]\n\nSince \\(i_{d1}+i_{d2}=0\\),\n\\[\nv_s=\\frac{g_{m1}}{g_{m1}+g_{m2}}v_{\\text{in}}.\n\\]\n\nThe output signal is\n\\[\nv_{\\text{out}}=-R_Di_{d2}=g_{m2}R_Dv_s.\n\\]\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D\n}.\n\\]\n\nAt the matched, balanced operating point,\n\\[\n\\boxed{A_v=+\\frac{g_mR_D}{2}}.\n\\]\n\nThe sign is **positive**: increasing \\(V_{\\text{in}}\\) raises \\(V_S\\), decreases \\(V_{GS2}\\) and \\(I_{D2}\\), and thus reduces the drop across \\(R_D\\), raising \\(V_{\\text{out}}\\).\n\n## 3. Input and output resistance\n\nIgnoring gate leakage and capacitance,\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty}.\n\\]\n\nNeglecting transistor output resistance,\n\\[\n\\boxed{R_{\\text{out}}\\approx R_D}.\n\\]\n\nIf equal finite output resistances \\(r_o\\) are included for both devices, with equal \\(g_m\\) and an ideal tail source,\n\\[\nR_{\\text{out}}=R_D\\parallel 2r_o,\n\\qquad\nA_v=\\frac{g_m}{2}\\left(R_D\\parallel 2r_o\\right).\n\\]\n\n## 4. Signal range and operating limits\n\nAs the input changes, the tail current is steered between the transistors:\n\n- **Large positive \\(V_{\\text{in}}-V_b\\):** \\(M_1\\) carries nearly all \\(I_1\\), \\(M_2\\) turns off, and \\(V_{\\text{out}}\\to V_{DD}\\).\n- **Large negative \\(V_{\\text{in}}-V_b\\):** \\(M_2\\) carries nearly all \\(I_1\\), giving \\(V_{\\text{out}}\\to V_{DD}-I_1R_D\\), provided it remains saturated.\n\nThus the ideal current-steering bounds are\n\\[\nV_{DD}-I_1R_D\\le V_{\\text{out}}\\le V_{DD}.\n\\]\n\nThe amplifier gain above is valid only while both devices are on and saturated. In particular, \\(M_2\\) requires\n\\[\n\\boxed{V_{\\text{out}}\\ge V_b-V_T},\n\\]\nand the tail-current source must have sufficient voltage compliance.",
        "format": "markdown",
        "sha256": "d1fd846a3a90a5d060a2bc3ef639067bb6156b625f5a92ffc97b17bcdac8dba3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a source-coupled NMOS pair with a single-ended, noninverting output and derives the correct small-signal gain and signal path. The additional analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 6212,
        "total_tokens": 8507,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 6212,
        "total_tokens": 8507,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The key is the **gate–source capacitance \\(C_{gs}\\) of \\(M_1\\)** interacting with \\(R_S\\). Without transistor capacitances, the output impedance would be resistive.\n\nTo find \\(Z_{\\text{out}}\\), set the input signal to zero, so \\(R_S\\) connects the gate to AC ground. Treat \\(M_2\\) as an ideal current source and initially neglect body effect, output resistances, and other capacitances.\n\nApply a test voltage \\(v_x\\) at the output. The gate voltage satisfies\n\\[\n\\frac{v_g}{R_S}+sC_{gs}(v_g-v_x)=0,\n\\]\nso\n\\[\nv_x-v_g=\\frac{v_x}{1+sR_SC_{gs}}.\n\\]\nThe test current entering the source of \\(M_1\\) is\n\\[\ni_x=(g_m+sC_{gs})(v_x-v_g).\n\\]\nConsequently,\n\\[\n\\boxed{Z_{\\text{out}}(s)=\\frac{1+sR_SC_{gs}}{g_m+sC_{gs}}.}\n\\]\n\nFor \\(s=j\\omega\\),\n\\[\n\\operatorname{Im}Z_{\\text{out}}\n=\\frac{\\omega C_{gs}(g_mR_S-1)}\n       {g_m^2+(\\omega C_{gs})^2}.\n\\]\nThus, the output has **positive—i.e., inductive—reactance when**\n\\[\n\\boxed{R_S>\\frac{1}{g_m}.}\n\\]\n\nAt frequencies well below \\(g_m/C_{gs}\\),\n\\[\nZ_{\\text{out}}\\approx \\frac{1}{g_m}+sL_{\\text{eq}},\n\\qquad\nL_{\\text{eq}}=\\frac{C_{gs}}{g_m}\n\\left(R_S-\\frac{1}{g_m}\\right).\n\\]\nFor \\(g_mR_S\\gg1\\), this reduces to \\(L_{\\text{eq}}\\approx R_SC_{gs}/g_m\\).\n\n**Physically:** at low frequency, the gate is effectively grounded, and the source follower presents a low resistance of about \\(1/g_m\\). As frequency rises, \\(C_{gs}\\) pulls the gate along with the source, weakening and delaying the transistor’s restoring current. If \\(R_S\\) is sufficiently large, the output current lags the output voltage—just as it does for an inductor. Other parasitic capacitances eventually limit this inductive behavior.",
        "format": "markdown",
        "sha256": "90ed79991d2296061c47ef0a99648c9a59518cbd420968c8edb30c2159ecf847"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the output-impedance expression, identifies the positive-reactance condition RS > 1/gm, and explains the Cgs–RS mechanism and low-frequency inductive approximation. The high-frequency limit is implicit in the expression; the essential explanation is sound.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 4162,
        "total_tokens": 5752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 4162,
        "total_tokens": 5752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The effect comes from the intrinsic gate–source capacitance \\(C_{gs1}\\): together with \\(R_S\\) and the transconductance of \\(M_1\\), it can synthesize an **active inductance**.\n\nTo calculate output impedance, set \\(v_{\\mathrm{in}}=0\\), so the gate of \\(M_1\\) is connected to AC ground through \\(R_S\\). Treat \\(M_2\\) as an ideal current sink and, initially, neglect other parasitics and output resistances. Write \\(g_m=g_{m1}\\) and \\(C_{gs}=C_{gs1}\\).\n\nApply a test voltage \\(v_x\\) at the output. Gate-node KCL gives\n\\[\n\\frac{v_g}{R_S}=sC_{gs}(v_x-v_g),\n\\qquad\nv_x-v_g=\\frac{v_x}{1+sR_SC_{gs}}.\n\\]\nThe test current entering the source is\n\\[\ni_x=(g_m+sC_{gs})(v_x-v_g).\n\\]\nHence\n\\[\n\\boxed{Z_{\\mathrm{out}}(s)=\n\\frac{1+sR_SC_{gs}}{g_m+sC_{gs}}.}\n\\]\n\nFor \\(s=j\\omega\\),\n\\[\n\\operatorname{Im}Z_{\\mathrm{out}}\n=\n\\frac{\\omega C_{gs}(g_mR_S-1)}\n{g_m^2+(\\omega C_{gs})^2}.\n\\]\nThus the impedance has a positive imaginary part—**it is inductive when**\n\\[\n\\boxed{g_mR_S>1.}\n\\]\nWhen \\(g_mR_S\\gg1\\), there is a frequency range\n\\[\n\\frac{1}{R_SC_{gs}}\\ll\\omega\\ll\\frac{g_m}{C_{gs}}\n\\]\nin which\n\\[\nZ_{\\mathrm{out}}\\approx sL_{\\mathrm{eff}},\n\\qquad\nL_{\\mathrm{eff}}\\approx\\frac{R_SC_{gs}}{g_m}.\n\\]\n\nPhysically, at low frequency the gate is nearly grounded, and \\(M_1\\) strongly opposes output-voltage changes, giving \\(Z_{\\mathrm{out}}\\approx1/g_m\\). At higher frequencies, \\(C_{gs}\\) makes the gate move with the source, reducing this restoring action. With sufficiently large \\(R_S\\), the resulting output current lags the output voltage, just as in an inductor. Other transistor capacitances limit this behavior in a real circuit.",
        "format": "markdown",
        "sha256": "36c235b2c0fae54776d191a93320f6d703c4804341406950e207dbff611293e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the output-impedance expression and shows it is inductive when \\(g_mR_S>1\\). The low-frequency behavior, gate–source-capacitance mechanism, and inductive approximation are also correctly explained.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 6761,
        "total_tokens": 8351,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 6761,
        "total_tokens": 8351,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The inductive behavior comes from \\(R_S\\) interacting with the intrinsic gate–source capacitance \\(C_{gs1}\\): together with the transistor’s transconductance, they form an **active inductance**.\n\nTo find the output impedance, set \\(V_{\\text{in}}=0\\), so the gate is connected to AC ground through \\(R_S\\). Treat \\(M_2\\) as an ideal bias-current source and, initially, neglect other parasitics.\n\nApply a test voltage \\(v_x\\) at the output. Writing \\(g_m=g_{m1}\\) and \\(C_{gs}=C_{gs1}\\), the gate voltage is\n\\[\nv_g=\\frac{sR_SC_{gs}}{1+sR_SC_{gs}}\\,v_x.\n\\]\nThe test current is\n\\[\ni_x=(g_m+sC_{gs})(v_x-v_g),\n\\]\nand hence\n\\[\n\\boxed{\nZ_{\\text{out}}(s)=\\frac{1+sR_SC_{gs}}{g_m+sC_{gs}}\n=\\frac{1}{g_m}\n\\frac{1+sR_SC_{gs}}{1+sC_{gs}/g_m}\n}.\n\\]\n\nThis impedance has a zero at \\(\\omega_z=1/(R_SC_{gs})\\) and a pole at \\(\\omega_p=g_m/C_{gs}\\). If\n\\[\n\\boxed{g_mR_S>1,}\n\\]\nthe zero occurs before the pole, giving \\(Z_{\\text{out}}\\) a **positive phase**, characteristic of an inductor.\n\nIn particular, if \\(g_mR_S\\gg1\\), then over the range\n\\[\n\\frac{1}{R_SC_{gs}}\\ll\\omega\\ll\\frac{g_m}{C_{gs}},\n\\]\n\\[\nZ_{\\text{out}}\\approx sL_{\\text{eq}},\n\\qquad\n\\boxed{L_{\\text{eq}}\\approx\\frac{R_SC_{gs}}{g_m}}.\n\\]\n\n**Physical interpretation:** At low frequencies, the gate is effectively grounded, and the source follower presents approximately \\(1/g_m\\). At higher frequencies, \\(C_{gs}\\) couples output-voltage changes back to the gate. The gate then follows the source, reducing changes in \\(v_{gs}\\) and thus reducing the transistor’s restoring current. This delayed current response produces the inductive behavior.\n\nOther parasitic capacitances eventually dominate, so the circuit is inductive only over a limited frequency range.",
        "format": "markdown",
        "sha256": "8a01fc30434617d99be97124dc574caabb6d171f5fa35443e3e4c77b7804e81b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the output-impedance expression and identifies the zero-before-pole condition, g_mR_S>1, for inductive behavior. Its low- and high-frequency gate-following explanation is consistent with the 1/g_m-to-R_S transition; the stated inductance approximation is valid for g_mR_S≫1.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 4678,
        "total_tokens": 6268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 4678,
        "total_tokens": 6268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The key feature is that **the feedback is positive, not negative**. Both transistors are grounded-source NMOS devices:\n\n- \\(M_1\\) senses \\(V_X\\) and drives \\(V_{\\text{out}}\\).\n- \\(M_2\\) senses \\(V_{\\text{out}}\\) and draws current from node \\(X\\).\n\nA perturbation follows the sequence\n\\[\nV_X\\uparrow\n\\;\\Rightarrow\\; I_{D1}\\uparrow\n\\;\\Rightarrow\\; V_{\\text{out}}\\downarrow\n\\;\\Rightarrow\\; I_{D2}\\downarrow\n\\;\\Rightarrow\\; V_X\\uparrow,\n\\]\nreinforcing the original change.\n\n## 1. DC operating point\n\nNeglecting gate currents,\n\\[\nI_{D2}=I_{\\text{in}},\\qquad\nI_{D1}=\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}.\n\\]\n\nIf both MOSFETs are in saturation and channel-length modulation is neglected, use\n\\[\nI_{Dj}=\\frac{\\beta_j}{2}(V_{GSj}-V_{Tj})^2,\n\\qquad\n\\beta_j=\\mu_nC_{\\text{ox}}(W/L)_j.\n\\]\nConsequently,\n\\[\n\\boxed{V_{\\text{out}}\n=V_{T2}+\\sqrt{\\frac{2I_{\\text{in}}}{\\beta_2}}}\n\\]\nand\n\\[\n\\boxed{V_X\n=V_{T1}+\n\\sqrt{\\frac{2(V_{DD}-V_{\\text{out}})}\n{\\beta_1R_{D1}}}}.\n\\]\n\nThese expressions are valid only when both devices are on and their saturation conditions hold:\n\\[\nV_{\\text{out}}\\ge V_X-V_{T1},\n\\qquad\nV_X\\ge V_{\\text{out}}-V_{T2}.\n\\]\n\n## 2. Small-signal analysis\n\nLet lowercase quantities denote small-signal variations, and define\n\\[\nR_1=R_{D1}\\parallel r_{o1}.\n\\]\nSince \\(V_{DD}\\) is AC ground, the output-node equation gives\n\\[\nv_{\\text{out}}=-g_{m1}R_1v_x.\n\\]\nAt node \\(X\\),\n\\[\ni_{\\text{in}}=\\frac{v_x}{r_{o2}}+g_{m2}v_{\\text{out}}.\n\\]\n\nDefine the positive DC loop gain\n\\[\nL_0=g_{m1}g_{m2}R_1r_{o2}.\n\\]\nThen the **input resistance** is\n\\[\n\\boxed{R_{\\text{in}}\n=\\frac{v_x}{i_{\\text{in}}}\n=\\frac{r_{o2}}{1-L_0}}\n\\]\nand the **transimpedance** is\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n=-\\frac{g_{m1}R_1r_{o2}}{1-L_0}}.\n\\]\n\nWith the ideal input current source set to zero—hence open-circuited—the output resistance is\n\\[\n\\boxed{R_{\\text{out}}=\\frac{R_1}{1-L_0}}.\n\\]\n\n### Neglecting transistor output conductances\n\nFor \\(r_{o1},r_{o2}\\rightarrow\\infty\\),\n\\[\ni_{\\text{in}}=g_{m2}v_{\\text{out}},\n\\]\nso\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{i_{\\text{in}}}\\approx\\frac{1}{g_{m2}}},\n\\qquad\n\\boxed{R_{\\text{in}}\\approx\n-\\frac{1}{g_{m1}g_{m2}R_{D1}}}.\n\\]\n\nThe negative input resistance is an important warning about stability.\n\n## 3. Stability\n\nWith capacitances \\(C_X\\) and \\(C_O\\) from the two nodes to ground, the small-signal characteristic equation is\n\\[\n\\left(sC_X+\\frac{1}{r_{o2}}\\right)\n\\left(sC_O+\\frac{1}{R_1}\\right)-g_{m1}g_{m2}=0.\n\\]\n\nIf \\(L_0>1\\), its constant term is negative, giving a right-half-plane pole: **the assumed operating point is unstable**. This is commonly the case when both MOSFETs operate in saturation with appreciable gain.\n\nThus, the result \\(v_{\\text{out}}/i_{\\text{in}}\\approx1/g_{m2}\\) is a formal response about the assumed equilibrium—not evidence of a stable transimpedance amplifier. Without sufficient damping, the circuit is regenerative and will move away from that equilibrium toward a nonlinear or compliance-limited state.",
        "format": "markdown",
        "sha256": "6fab4ca0526e8ae59123ba4111e25820430c208f456d124b64ad32ed19c73e2c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2 as controlled by Vout and the M1–M2 positive-feedback loop, then derives the loop-modified negative input resistance and explains the instability for loop gain above one. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 8753,
        "total_tokens": 10810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7690,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 8753,
        "total_tokens": 10810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7690,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The key feature is that **the circuit has positive feedback**. Both MOSFETs are NMOS devices with grounded sources; \\(M_1\\) is a common-source stage, and \\(M_2\\) feeds the output voltage back to node \\(X\\).\n\nAssume no output load, negligible gate currents, and initially that both transistors operate in saturation.\n\n## 1. Feedback polarity\n\nConsider a small increase in \\(V_{\\text{out}}\\):\n\\[\nV_{\\text{out}}\\uparrow\n\\;\\Rightarrow\\; I_{D2}\\uparrow\n\\;\\Rightarrow\\; V_X\\downarrow\n\\;\\Rightarrow\\; I_{D1}\\downarrow\n\\;\\Rightarrow\\; V_{\\text{out}}\\uparrow.\n\\]\n\nThe original change is reinforced, so this is **regenerative feedback**, not a conventional negative-feedback transimpedance amplifier.\n\n## 2. DC operating point\n\nSince neither gate draws current,\n\\[\nI_{D2}=I_{\\text{in}},\\qquad\nI_{D1}=\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}.\n\\]\n\nUsing the long-channel saturation model\n\\[\nI_D=\\frac{\\beta}{2}(V_{GS}-V_T)^2,\n\\]\nand neglecting channel-length modulation gives\n\\[\n\\boxed{V_{\\text{out}}\n=V_{T2}+\\sqrt{\\frac{2I_{\\text{in}}}{\\beta_2}}}\n\\]\nand\n\\[\n\\boxed{V_X\n=V_{T1}+\n\\sqrt{\\frac{2(V_{DD}-V_{\\text{out}})}\n{\\beta_1R_{D1}}}}.\n\\]\n\nThese equations describe a **candidate equilibrium**. They require\n\\[\nV_{\\text{out}}\\ge V_X-V_{T1},\n\\qquad\nV_X\\ge V_{\\text{out}}-V_{T2},\n\\qquad\nV_{\\text{out}}<V_{DD},\n\\]\nand do not establish that the equilibrium is stable.\n\n## 3. Small-signal gain and impedances\n\nInclude the transistor output resistances and define\n\\[\nR_1=R_{D1}\\parallel r_{o1}.\n\\]\n\nThe two node equations are\n\\[\ni_{\\text{in}}=\\frac{v_x}{r_{o2}}+g_{m2}v_{\\text{out}},\n\\qquad\nv_{\\text{out}}=-g_{m1}R_1v_x.\n\\]\n\nDefine the positive loop-gain magnitude\n\\[\nL=g_{m1}g_{m2}R_1r_{o2}.\n\\]\n\nThen the input resistance and transimpedance are\n\\[\n\\boxed{R_{\\text{in}}=\\frac{v_x}{i_{\\text{in}}}\n=\\frac{r_{o2}}{1-L}}\n\\]\nand\n\\[\n\\boxed{Z_t=\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n=-\\frac{g_{m1}R_1r_{o2}}{1-L}}.\n\\]\n\nWith the input small-signal current set to zero, the output resistance is\n\\[\n\\boxed{R_{\\text{out}}=\\frac{R_1}{1-L}}.\n\\]\n\nIf output resistances are neglected—or, more generally, \\(L\\gg1\\)—the formal low-frequency results become\n\\[\n\\boxed{Z_t\\approx \\frac{1}{g_{m2}}},\n\\qquad\n\\boxed{R_{\\text{in}}\\approx\n-\\frac{1}{g_{m1}g_{m2}R_1}}.\n\\]\n\nThe negative input resistance is an important sign of the regenerative behavior.\n\n## 4. Stability\n\nWith lumped capacitances \\(C_X\\) and \\(C_o\\) at the two nodes, the characteristic equation is\n\\[\n\\left(sC_X+\\frac1{r_{o2}}\\right)\n\\left(sC_o+\\frac1{R_1}\\right)-g_{m1}g_{m2}=0.\n\\]\n\nIts constant term is proportional to \\(1-L\\). Consequently:\n\n- **\\(L<1\\):** stable in this two-node model.\n- **\\(L=1\\):** regeneration threshold.\n- **\\(L>1\\):** one right-half-plane pole; the equilibrium is unstable.\n\nThus, the saturated operating point is generally unstable when the loop gain is large. Although static algebra then gives \\(Z_t\\approx1/g_{m2}\\), that result should **not** be interpreted as the gain of a stable linear amplifier. In practice, the circuit moves toward a different operating region or a current-source compliance limit.",
        "format": "markdown",
        "sha256": "9ce582863a1bfe67a6e12f6d2373908c80cf5fdbb41e8f86f2bfdfbf811777b8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection and the positive-feedback loop, and derives the loop-gain-modified input resistance and instability when loop gain exceeds one. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 7753,
        "total_tokens": 9810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 7753,
        "total_tokens": 9810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The important feature is that **\\(M_1\\) and \\(M_2\\) form a positive-feedback loop**, not an ordinary negative-feedback transimpedance amplifier. With no component values specified, the analysis is symbolic.\n\n## 1. Circuit connections and DC bias\n\nBoth devices are NMOS transistors with grounded sources:\n\n- \\(M_1\\): gate at \\(X\\), drain at \\(V_{\\text{out}}\\).\n- \\(M_2\\): gate at \\(V_{\\text{out}}\\), drain at \\(X\\).\n\nNeglecting MOS gate currents, Kirchhoff’s current law gives\n\\[\n\\boxed{I_{D2}=I_{\\text{in}}},\\qquad\n\\boxed{I_{D1}=\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}}.\n\\]\n\nAssume initially that both transistors are in saturation and neglect channel-length modulation. Using\n\\[\nI_D=\\frac{\\beta}{2}(V_{GS}-V_T)^2,\n\\qquad \\beta=\\mu_nC_{\\text{ox}}\\frac WL,\n\\]\nwe obtain\n\\[\n\\boxed{V_{\\text{out}}\n=V_{T2}+\\sqrt{\\frac{2I_{\\text{in}}}{\\beta_2}}}\n\\]\nand\n\\[\n\\boxed{V_X\n=V_{T1}+\n\\sqrt{\\frac{2(V_{DD}-V_{\\text{out}})}\n{\\beta_1R_{D1}}}}.\n\\]\n\nThese are **candidate operating-point equations**. They apply only if the resulting voltages satisfy\n\\[\nV_{\\text{out}}\\ge V_X-V_{T1}\n\\quad(M_1\\text{ saturated}),\n\\]\n\\[\nV_X\\ge V_{\\text{out}}-V_{T2}\n\\quad(M_2\\text{ saturated}),\n\\]\nwith both devices on and \\(V_{\\text{out}}\\le V_{DD}\\). If not, the appropriate cutoff or triode-region equations must be used.\n\n## 2. Small-signal gain and resistances\n\nInclude transistor output resistances and define\n\\[\nR_O=R_{D1}\\parallel r_{o1}.\n\\]\n\nAt low frequencies, with no external output load,\n\\[\nv_{\\text{out}}=-g_{m1}R_Ov_x,\n\\]\nwhile KCL at \\(X\\) gives\n\\[\ni_{\\text{in}}=\\frac{v_x}{r_{o2}}+g_{m2}v_{\\text{out}}.\n\\]\n\nDefine the positive loop-gain magnitude\n\\[\nL=g_{m1}g_{m2}R_Or_{o2}.\n\\]\n\nCombining the equations yields the transimpedance\n\\[\n\\boxed{\n\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n=\n-\\frac{g_{m1}R_Or_{o2}}{1-L}\n}.\n\\]\n\nThe input resistance is\n\\[\n\\boxed{\nR_{\\text{in}}=\\frac{v_x}{i_{\\text{in}}}\n=\\frac{r_{o2}}{1-L}\n}.\n\\]\n\nThe output resistance, with the input current held fixed, is\n\\[\n\\boxed{\nR_{\\text{out}}=\\frac{R_O}{1-L}\n}.\n\\]\n\nIn the formal high-loop-gain limit,\n\\[\n\\frac{v_{\\text{out}}}{i_{\\text{in}}}\\approx\\frac{1}{g_{m2}},\n\\qquad\nR_{\\text{in}}\\approx-\\frac{1}{g_{m1}g_{m2}R_O}.\n\\]\nThe negative input resistance is a warning that stability must be checked.\n\n## 3. Feedback polarity and stability\n\nConsider a small increase in \\(V_X\\):\n\\[\nV_X\\uparrow\n\\;\\Rightarrow\\;\nI_{D1}\\uparrow\n\\;\\Rightarrow\\;\nV_{\\text{out}}\\downarrow\n\\;\\Rightarrow\\;\nI_{D2}\\downarrow.\n\\]\n\nWith \\(I_{\\text{in}}\\) fixed, less current through \\(M_2\\) means more current charges node \\(X\\), driving \\(V_X\\) still higher. Thus the feedback is **regenerative**.\n\nFor example, including lumped capacitances \\(C_X\\) and \\(C_O\\) at the two nodes gives the characteristic equation\n\\[\n\\left(sC_X+\\frac1{r_{o2}}\\right)\n\\left(sC_O+\\frac1{R_O}\\right)\n-g_{m1}g_{m2}=0.\n\\]\n\nIts constant term is\n\\[\n\\frac{1-L}{r_{o2}R_O}.\n\\]\nConsequently, in this two-node model:\n\n- **\\(L<1\\):** the operating point is locally stable.\n- **\\(L=1\\):** a pole lies at zero.\n- **\\(L>1\\):** one pole is in the right half-plane, so the operating point is unstable.\n\nIn particular, neglecting \\(M_2\\)’s output conductance makes the both-on operating point unstable.\n\n**Conclusion:** Although the ideal DC equations suggest a positive current-to-voltage slope of approximately \\(1/g_{m2}\\), that does not establish a stable amplifier. The circuit has positive feedback; for \\(L>1\\), disturbances grow until a transistor changes operating region or some circuit limit is reached.",
        "format": "markdown",
        "sha256": "5aebbc950c9bea01e57ba93e5dd871569cbbefd9bb91944f6708ec0153702838"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection and the positive-feedback loop, derives the loop-gain-modified negative input resistance, and explains the instability when loop gain exceeds one. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 8172,
        "total_tokens": 10229,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7006,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 8172,
        "total_tokens": 10229,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7006,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit function and feedback\n\nThis is a **two-stage transimpedance amplifier**: it converts input current into output voltage.\n\n- \\(M_1\\) is a **common-gate** stage, with its gate held at \\(V_b\\).\n- \\(M_2\\) is a **common-source** stage.\n- \\(R_F\\) provides **shunt–shunt negative feedback**: output voltage is sampled, and a feedback current is returned to the input node.\n\nA positive incremental input current raises the source voltage of \\(M_1\\), reducing its drain current. Consequently, \\(V_X\\) rises, \\(M_2\\) conducts more, and \\(V_{\\text{out}}\\) falls. This draws additional current away from the input through \\(R_F\\), opposing the input-current change.\n\n## 2. Small-signal analysis\n\nAssume both MOSFETs are biased in saturation, \\(V_b\\) and \\(V_{DD}\\) are AC grounds, and channel-length modulation, body effect, and capacitances are neglected.\n\nLet \\(v_s\\) be the small-signal voltage at the source of \\(M_1\\). Then\n\n\\[\nv_x=g_{m1}R_{D1}v_s.\n\\]\n\nThe feedback current, in the direction shown, is\n\n\\[\ni_{\\mathrm{RF}}=\\frac{v_o-v_s}{R_F}.\n\\]\n\nKCL at the input and output gives\n\n\\[\ni_{\\mathrm{in}}\n=g_{m1}v_s+\\frac{v_s-v_o}{R_F},\n\\]\n\n\\[\n\\frac{v_o}{R_{D2}}+g_{m2}v_x+\\frac{v_o-v_s}{R_F}=0.\n\\]\n\nDefine the dimensionless quantities\n\n\\[\nA=g_{m1}g_{m2}R_{D1}R_{D2},\n\\qquad\nD=1+g_{m1}(R_F+R_{D2})+A.\n\\]\n\nSolving gives the **closed-loop transimpedance**\n\n\\[\n\\boxed{\nZ_T=\\frac{v_o}{i_{\\mathrm{in}}}\n=\\frac{R_{D2}-A R_F}{D}\n}\n\\]\n\nor, explicitly,\n\n\\[\n\\boxed{\nZ_T=\n\\frac{R_{D2}\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)}\n{1+g_{m1}(R_F+R_{D2})\n+g_{m1}g_{m2}R_{D1}R_{D2}}\n}.\n\\]\n\nThese expressions include both loading and direct signal feedthrough through \\(R_F\\).\n\n### Input resistance\n\n\\[\n\\boxed{\nR_{\\mathrm{in}}=\\frac{v_s}{i_{\\mathrm{in}}}\n=\\frac{R_F+R_{D2}}{D}\n}\n\\]\n\n### Output resistance\n\nSetting the ideal input current source to zero—**open-circuiting it**—and applying an output test source gives\n\n\\[\n\\boxed{\nR_{\\mathrm{out}}\n=\\frac{R_{D2}(1+g_{m1}R_F)}{D}\n}.\n\\]\n\nThus, the feedback reduces both input and output resistance.\n\n## 3. Gain and useful limiting cases\n\nWith \\(R_F\\) disconnected,\n\n\\[\n\\boxed{\nZ_{T0}=-g_{m2}R_{D1}R_{D2}\n},\n\\qquad\nR_{\\mathrm{in},0}=\\frac{1}{g_{m1}},\n\\qquad\nR_{\\mathrm{out},0}=R_{D2}.\n\\]\n\nA low-frequency loop-return ratio, including resistive loading, is\n\n\\[\n\\boxed{\nT=\n\\frac{g_{m1}g_{m2}R_{D1}R_{D2}}\n{1+g_{m1}(R_F+R_{D2})}\n}\n\\]\n\nusing the negative-feedback convention with denominator \\(1+T\\).\n\nFor sufficiently large forward gain, the \\(A\\)-terms dominate the transimpedance expression, yielding\n\n\\[\n\\boxed{v_o\\approx-i_{\\mathrm{in}}R_F}.\n\\]\n\nTherefore:\n\n- The transimpedance magnitude is approximately \\(R_F\\).\n- The output is inverted relative to the input current.\n- \\(i_{\\mathrm{RF}}\\approx-i_{\\mathrm{in}}\\).\n- The input node becomes approximately an **AC virtual ground**, although its DC voltage is generally not zero.\n\n## 4. Bias and frequency limitations\n\nThe equations above describe variations about a valid DC operating point. Actual bias currents, output headroom, and saturation margins require resistor values, \\(V_{DD}\\), \\(V_b\\), and MOSFET parameters. Bandwidth and stability also require the device and load capacitances; negative feedback at low frequency alone does not guarantee high-frequency stability.",
        "format": "markdown",
        "sha256": "4da652fcafd83eb84efda0570ce9dc50dba4611307d5418f341a6fa36273a7e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from Vout to the input. The transimpedance and input-resistance analysis is also consistent with the circuit.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 14793,
        "total_tokens": 17071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 14793,
        "total_tokens": 17071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **transimpedance amplifier**: it converts an input current into an output voltage. \\(M_1\\) is a common-gate input stage, \\(M_2\\) is a common-source gain stage, and \\(R_F\\) provides **shunt–shunt negative feedback**.\n\nWith no component values given, the analysis is symbolic.\n\n## 1. Feedback polarity\n\nA positive input-current change produces the sequence\n\\[\ni_{\\rm in}\\uparrow\n\\;\\Rightarrow\\;\nv_{S1}\\uparrow\n\\;\\Rightarrow\\;\nv_{GS1}\\downarrow\n\\;\\Rightarrow\\;\nv_X\\uparrow\n\\;\\Rightarrow\\;\nv_{\\rm out}\\downarrow.\n\\]\n\nThe falling output draws more current away from the input node through \\(R_F\\), opposing the original change. Thus the feedback is negative, and the current-to-voltage response is normally inverting.\n\n## 2. Small-signal analysis\n\nAssume both MOSFETs operate in saturation, \\(V_b\\) and \\(V_{DD}\\) are AC grounds, and neglect \\(r_o\\), body effect, and capacitances. Let \\(v_s\\) denote the small-signal voltage at the source of \\(M_1\\).\n\nThe node equations are\n\\[\nv_X=g_{m1}R_{D1}v_s,\n\\]\n\\[\ni_{\\rm in}=g_{m1}v_s+\\frac{v_s-v_{\\rm out}}{R_F},\n\\]\n\\[\n\\frac{v_{\\rm out}}{R_{D2}}\n+g_{m2}v_X\n+\\frac{v_{\\rm out}-v_s}{R_F}=0.\n\\]\n\nDefine the dimensionless denominator\n\\[\nD=1+g_{m1}(R_F+R_{D2})\n  +g_{m1}g_{m2}R_{D1}R_{D2}.\n\\]\n\n### Transimpedance\n\nSolving the equations gives\n\\[\n\\boxed{\nZ_T\\equiv\\frac{v_{\\rm out}}{i_{\\rm in}}\n=\n\\frac{R_{D2}\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)}{D}\n}\n\\]\n\nThis expression includes the loading and direct feedthrough caused by \\(R_F\\).\n\n### Input resistance\n\n\\[\n\\boxed{\nR_{\\rm in}\\equiv\\frac{v_s}{i_{\\rm in}}\n=\\frac{R_F+R_{D2}}{D}\n}\n\\]\n\n### Output resistance\n\nWith \\(i_{\\rm in}=0\\), meaning the ideal input current source is opened,\n\\[\n\\boxed{\nR_{\\rm out}\n=\\frac{R_{D2}(1+g_{m1}R_F)}{D}\n}\n\\]\n\nAs a check, disconnecting feedback by letting \\(R_F\\to\\infty\\) gives\n\\[\nZ_{T,\\rm OL}=-g_{m2}R_{D1}R_{D2},\\qquad\nR_{\\rm in,OL}=\\frac1{g_{m1}},\\qquad\nR_{\\rm out,OL}=R_{D2}.\n\\]\n\n## 3. High-loop-gain behavior\n\nThe low-frequency negative-feedback loop-gain magnitude is\n\\[\nT=\n\\frac{g_{m1}g_{m2}R_{D1}R_{D2}}\n{1+g_{m1}(R_F+R_{D2})}.\n\\]\n\nWhen \\(T\\gg1\\), and the forward amplifier path dominates direct resistor feedthrough,\n\\[\n\\boxed{v_{\\rm out}\\approx-R_F\\,i_{\\rm in}}.\n\\]\n\nThe input node is then approximately an **AC virtual ground**, and nearly all the signal current flows through \\(R_F\\). Since the indicated \\(i_{\\rm RF}\\) direction is from output to input,\n\\[\ni_{\\rm RF}=\\frac{v_{\\rm out}-v_s}{R_F}\n\\approx-i_{\\rm in}.\n\\]\n\nThus, sufficiently strong feedback makes the transimpedance approximately \\(-R_F\\), while reducing both input and output resistances.\n\nThese are **small-signal** results. The DC output has a bias-dependent offset; it is not generally equal to \\(-R_F I_{\\rm in}\\). A numerical bias point or bandwidth requires resistor values, supply/bias voltages, and transistor parameters.",
        "format": "markdown",
        "sha256": "790639f730ed7dc5355a5cc2fb4d1905719399e4541d61f9b4d9960d6aeab61d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input stage, M2 as the common-source stage driven by X, and RF as negative shunt-shunt feedback from output to input. The transimpedance and small-signal analysis are consistent with the circuit.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 10865,
        "total_tokens": 13143,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9910,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 10865,
        "total_tokens": 13143,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9910,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit function\n\nThis is an **inverting transimpedance amplifier**: it converts an input current into an output voltage.\n\n- \\(M_1\\) is a **common-gate** input stage, with its gate biased by \\(V_b\\).\n- \\(M_2\\) is a **common-source** voltage-gain stage.\n- \\(R_F\\) provides **shunt–shunt negative feedback**, reducing both input and output resistance.\n\nIn the normal amplifying regime, increasing the input current raises the source voltage of \\(M_1\\), reducing its drain current. Consequently, \\(V_X\\) rises, \\(M_2\\) conducts more, and \\(V_{\\text{out}}\\) falls. The resulting feedback-current change opposes the input-current change.\n\n## 2. Small-signal analysis\n\nAssume both MOSFETs are biased in saturation, neglect their output resistances and capacitances, and treat \\(V_{DD}\\) and \\(V_b\\) as ac ground.\n\nLet \\(v_s\\) be the small-signal voltage at the input/source node of \\(M_1\\). Then\n\n\\[\nv_x=g_{m1}R_{D1}v_s.\n\\]\n\nKCL at the input and output gives\n\n\\[\ni_{\\text{in}}\n=g_{m1}v_s+\\frac{v_s-v_{\\text{out}}}{R_F},\n\\]\n\n\\[\n\\frac{v_{\\text{out}}}{R_{D2}}\n+g_{m2}v_x\n+\\frac{v_{\\text{out}}-v_s}{R_F}=0.\n\\]\n\nDefine\n\n\\[\nA=g_{m1}g_{m2}R_{D1}R_{D2},\n\\qquad\nD=1+g_{m1}(R_F+R_{D2})+A.\n\\]\n\nSolving gives the **closed-loop transimpedance**\n\n\\[\n\\boxed{\nZ_T\\equiv\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n=\\frac{R_{D2}-A R_F}{D}\n}\n\\]\n\nand the input resistance\n\n\\[\n\\boxed{\nR_{\\text{in}}\n=\\frac{v_s}{i_{\\text{in}}}\n=\\frac{R_F+R_{D2}}{D}.\n}\n\\]\n\nWith the input current source set to zero—i.e. opened—the output resistance is\n\n\\[\n\\boxed{\nR_{\\text{out}}\n=\\frac{R_{D2}(1+g_{m1}R_F)}{D}.\n}\n\\]\n\nThese expressions include the loading caused by \\(R_F\\) at both ends.\n\n## 3. Usual high-gain approximation\n\nWith \\(R_F\\) removed, the open-loop transimpedance is\n\n\\[\nZ_{T0}=-g_{m2}R_{D1}R_{D2}.\n\\]\n\nFor the usual case in which\n\n\\[\nR_F\\gg R_{D2},\\;\\frac{1}{g_{m1}},\n\\]\n\nand direct resistive feedthrough is negligible, the loop-gain magnitude is approximately\n\n\\[\nT\\approx\\frac{g_{m2}R_{D1}R_{D2}}{R_F}.\n\\]\n\nThe closed-loop results simplify to\n\n\\[\nZ_T\\approx-R_F\\frac{T}{1+T},\n\\]\n\n\\[\nR_{\\text{in}}\\approx\\frac{1}{g_{m1}(1+T)},\n\\qquad\nR_{\\text{out}}\\approx\\frac{R_{D2}}{1+T}.\n\\]\n\nThus, for \\(T\\gg1\\),\n\n\\[\n\\boxed{v_{\\text{out}}\\approx-R_F i_{\\text{in}}.}\n\\]\n\nThe input node is then approximately an **ac virtual ground**. With the feedback-current direction shown,\n\n\\[\ni_{\\text{RF}}\n=\\frac{v_{\\text{out}}-v_s}{R_F}\n\\approx-i_{\\text{in}}.\n\\]\n\n## 4. Bias and operating limits\n\nThe preceding formulas describe **signal changes about a dc operating point**, not the absolute dc output voltage. In particular,\n\n\\[\nV_{\\text{out}}\\approx V_{\\text{out},Q}-R_F\\,\\Delta I_{\\text{in}}.\n\\]\n\nThe bias must keep both devices on and saturated. Ignoring body effect, the saturation conditions include\n\n\\[\nV_X\\ge V_b-V_{T1},\n\\qquad\nV_{\\text{out}}\\ge V_X-V_{T2}.\n\\]\n\nNumerical bias voltages, signal range, bandwidth, and stability require resistor values and MOSFET parameters.",
        "format": "markdown",
        "sha256": "29d840426785e3b8f6b32b50cf2c84cd585ceb5409260cc1eb377cc86e356229"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from Vout to the input node, forming a transimpedance amplifier. Its signal-direction explanation and small-signal results are consistent with the circuit.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 14197,
        "total_tokens": 16475,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13194,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 14197,
        "total_tokens": 16475,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13194,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **negative-feedback current-to-voltage (transimpedance) stage**. \\(M_1\\) is an NMOS transistor, and \\(M_2\\) is a PMOS transistor.\n\nLet \\(V_x\\) denote the input-node voltage, and call the unlabeled lower current sink \\(I_B\\). Assume ideal bias current sources, an unloaded output, and both transistors operating in saturation.\n\n## 1. DC operating point\n\nAt the output node, all the current supplied by \\(I_1\\) flows through \\(M_1\\):\n\\[\nI_{D1}=I_1.\n\\]\n\nAt the input node, \\(I_{\\mathrm{in}}\\), \\(I_{D1}\\), and \\(I_{D2}\\) all enter, while \\(I_B\\) leaves. Therefore,\n\\[\n\\boxed{I_{D2}=I_B-I_1-I_{\\mathrm{in}}.}\n\\]\n\nUsing the square-law model \\(I_D=\\tfrac12\\beta V_{\\mathrm{OV}}^2\\), neglecting body effect and channel-length modulation,\n\\[\n\\boxed{V_x=V_b-V_{TN}-\\sqrt{\\frac{2I_1}{\\beta_1}}}\n\\]\nand\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{DD}-|V_{TP}|\n-\\sqrt{\\frac{2(I_B-I_1-I_{\\mathrm{in}})}{\\beta_2}}\n},\n\\]\nwhere \\(\\beta_i=\\mu_iC_{\\mathrm{ox}}(W/L)_i\\).\n\nThus, the input voltage is approximately fixed, while increasing the input current increases the output voltage. Around a bias point,\n\\[\n\\boxed{\\frac{dV_{\\mathrm{out}}}{dI_{\\mathrm{in}}}\\approx\\frac{1}{g_{m2}}>0.}\n\\]\n\nAt zero DC input current, \\(I_B>I_1\\) is necessary to keep \\(M_2\\) conducting.\n\n## 2. Feedback mechanism\n\nA positive input-current perturbation initially raises \\(V_x\\). This reduces \\(M_1\\)'s gate-source voltage and drain current, allowing \\(I_1\\) to raise \\(V_{\\mathrm{out}}\\). The rising output reduces \\(M_2\\)'s source-gate voltage, so \\(M_2\\) supplies less current to the input node.\n\nThis is **negative feedback**: \\(M_2\\)'s current reduction compensates for the added input current, keeping \\(V_x\\) nearly constant.\n\n## 3. Low-frequency small-signal analysis\n\nLet \\(g_{oi}=1/r_{oi}\\), with \\(V_{DD}\\) and \\(V_b\\) at AC ground. Neglect body effect initially.\n\nSince the output is unloaded and \\(I_1\\) is ideal, \\(M_1\\)'s incremental drain current is zero:\n\\[\n0=g_{o1}v_{\\mathrm{out}}-(g_{m1}+g_{o1})v_x.\n\\]\nHence,\n\\[\nv_{\\mathrm{out}}=A v_x,\n\\qquad\nA=1+g_{m1}r_{o1}.\n\\]\n\nThe incremental current supplied by \\(M_2\\) to the input node is\n\\[\ni_{d2}=-g_{m2}v_{\\mathrm{out}}-g_{o2}v_x.\n\\]\nInput-node KCL therefore gives\n\\[\ni_{\\mathrm{in}}=g_{m2}v_{\\mathrm{out}}+g_{o2}v_x.\n\\]\n\nConsequently, the input resistance is\n\\[\n\\boxed{\nR_{\\mathrm{in}}\n=\\frac{v_x}{i_{\\mathrm{in}}}\n=\\frac{1}{g_{m2}A+g_{o2}}\n}\n\\]\nand the transimpedance is\n\\[\n\\boxed{\nZ_T=\\frac{v_{\\mathrm{out}}}{i_{\\mathrm{in}}}\n=\\frac{A}{g_{m2}A+g_{o2}}.\n}\n\\]\n\nIn the usual high-intrinsic-gain limit,\n\\[\n\\boxed{\nR_{\\mathrm{in}}\\approx\n\\frac{1}{g_{m1}g_{m2}r_{o1}},\n\\qquad\nZ_T\\approx\\frac{1}{g_{m2}}.\n}\n\\]\n\nThe feedback therefore makes the input resistance much smaller than the ordinary common-gate value \\(1/g_{m1}\\).\n\nWith the input signal current set to zero—an ideal current source becomes an open circuit—the output resistance is\n\\[\nR_{\\mathrm{out}}\n=\n\\frac{g_{m1}+g_{o1}+g_{o2}}\n{g_{m2}(g_{m1}+g_{o1})+g_{o1}g_{o2}}\n\\approx\\boxed{\\frac{1}{g_{m2}}}.\n\\]\n\nIf \\(M_1\\)'s body effect is significant, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\) in these small-signal expressions.\n\n## 4. Operating limits\n\nThe analysis requires\n\\[\nI_B-I_1-I_{\\mathrm{in}}>0\n\\]\nso that \\(M_2\\) remains on. Saturation requires\n\\[\nM_1:\\quad V_{\\mathrm{out}}\\ge V_b-V_{TN},\n\\]\n\\[\nM_2:\\quad V_x\\le V_{\\mathrm{out}}+|V_{TP}|.\n\\]\nAlso, \\(M_2\\) must satisfy \\(V_{\\mathrm{out}}<V_{DD}-|V_{TP}|\\), and both bias sources need sufficient voltage compliance.\n\n**In summary:** the circuit accepts current at a very low-impedance node and produces a positive output-voltage change of approximately \\(i_{\\mathrm{in}}/g_{m2}\\).",
        "format": "markdown",
        "sha256": "7c76cc9625d8dda0c16b918a4c9a2a163551ad9221ae279c785583b9c8d3b8c1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device and PMOS feedback path from Vout to the input node, and derives the very low input resistance and transimpedance of approximately 1/gm2. The key topology and behavior match the golden solution.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 11944,
        "total_tokens": 14111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10678,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 11944,
        "total_tokens": 14111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10678,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(x\\) denote the common source-of-\\(M_1\\)/drain-of-\\(M_2\\) node, and call the unlabeled lower current sink \\(I_B\\). Here \\(M_1\\) is NMOS and \\(M_2\\) is PMOS.\n\nThe circuit is a **negative-feedback transimpedance amplifier**: it converts the injected current \\(I_{\\mathrm{in}}\\) into an output voltage while maintaining a nearly constant input-node voltage.\n\nAssume ideal bias current sources, an unloaded output, low-frequency operation, and both transistors in saturation.\n\n## 1. DC operating point\n\nSince the gate of \\(M_2\\) draws no DC current, output-node KCL gives\n\\[\nI_{D1}=I_1.\n\\]\nAt node \\(x\\),\n\\[\nI_{\\mathrm{in,DC}}+I_1+I_{D2}=I_B,\n\\]\nso\n\\[\n\\boxed{I_{D2}=I_B-I_1-I_{\\mathrm{in,DC}}}.\n\\]\nA valid operating point with \\(M_2\\) conducting therefore requires \\(I_B>I_1+I_{\\mathrm{in,DC}}\\).\n\nNeglecting body effect and channel-length modulation, the square-law model gives\n\\[\nV_x=V_b-V_{TN}-\\sqrt{\\frac{2I_1}{\\beta_1}},\n\\]\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{DD}-|V_{TP}|\n-\\sqrt{\\frac{2\\left(I_B-I_1-I_{\\mathrm{in,DC}}\\right)}{\\beta_2}}\n},\n\\]\nwhere \\(\\beta_j=\\mu_j C_{\\mathrm{ox}}(W/L)_j\\).\n\nThus, increasing the injected input current reduces the current supplied by \\(M_2\\), requiring its gate voltage—and hence \\(V_{\\mathrm{out}}\\)—to rise.\n\nThe assumed saturation conditions include\n\\[\nV_{\\mathrm{out}}\\ge V_b-V_{TN},\n\\qquad\nV_{\\mathrm{out}}\\ge V_x-|V_{TP}|,\n\\]\ntogether with the compliance requirements of any practical bias sources.\n\n## 2. Feedback action\n\nA positive input-current disturbance initially raises \\(V_x\\). This reduces \\(M_1\\)'s drain current, causing \\(V_{\\mathrm{out}}\\) to rise because \\(I_1\\) continues to supply current. The higher output voltage reduces the PMOS current delivered to node \\(x\\), opposing the original disturbance.\n\nHence the feedback is **negative**, even though the current-to-voltage transfer has a **positive sign**.\n\n## 3. Small-signal transimpedance and input resistance\n\nTake \\(V_{DD}\\) and \\(V_b\\) as AC grounds, and retain transistor output resistances \\(r_{o1},r_{o2}\\).\n\nBecause \\(I_1\\) is ideal and the output is unloaded, \\(M_1\\)'s incremental drain current is zero:\n\\[\n-g_{m1}v_x+\\frac{v_o-v_x}{r_{o1}}=0.\n\\]\nTherefore,\n\\[\nv_o=A v_x,\n\\qquad\nA\\equiv 1+g_{m1}r_{o1}.\n\\]\n\nAt the input node, the additional injected current must be balanced by the reduction in \\(M_2\\)'s current:\n\\[\ni_{\\mathrm{in}}=g_{m2}v_o+\\frac{v_x}{r_{o2}}.\n\\]\n\nConsequently, the transimpedance is\n\\[\n\\boxed{\nZ_T\\equiv\\frac{v_o}{i_{\\mathrm{in}}}\n=\\frac{A r_{o2}}{1+g_{m2}A r_{o2}}\n}.\n\\]\nFor large loop gain, \\(g_{m2}A r_{o2}\\gg1\\),\n\\[\n\\boxed{Z_T\\approx+\\frac{1}{g_{m2}}}.\n\\]\n\nThe input resistance is\n\\[\n\\boxed{\nR_{\\mathrm{in}}\n=\\frac{r_{o2}}{1+g_{m2}A r_{o2}}\n}.\n\\]\nIf also \\(g_{m1}r_{o1}\\gg1\\),\n\\[\n\\boxed{\nR_{\\mathrm{in}}\\approx\n\\frac{1}{g_{m1}g_{m2}r_{o1}}\n}.\n\\]\nThus feedback can make the input resistance much smaller than the usual common-gate value \\(1/g_{m1}\\).\n\n## 4. Output resistance\n\nWith the input signal current source turned off—opened—the small-signal output resistance is\n\\[\n\\boxed{\nR_{\\mathrm{out}}\n=\\frac{r_{o1}+A r_{o2}}\n{1+g_{m2}A r_{o2}}\n}.\n\\]\nFor large loop gain and \\(g_{m1}r_{o2}\\gg1\\), this is approximately\n\\[\nR_{\\mathrm{out}}\\approx\\frac{1}{g_{m2}}.\n\\]\n\nBody effect in \\(M_1\\) can be included in these small-signal expressions by replacing \\(g_{m1}\\) with \\(g_{m1}+g_{mb1}\\).\n\n**Essential result:** the input node is nearly voltage-clamped, and\n\\[\n\\boxed{v_o\\approx \\frac{i_{\\mathrm{in}}}{g_{m2}}}\n\\]\nwithin the bias, headroom, and small-signal limits.",
        "format": "markdown",
        "sha256": "15b2cc7c028dc585fe4e08cd904584667a4f9b7e7d207959d8565062756f7f34"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device and PMOS feedback path from Vout to the input node, and derives the very low input resistance and approximately 1/gm2 transimpedance and output resistance. The additional operating-point and small-signal detail is consistent with the stated assumptions.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 11868,
        "total_tokens": 14035,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10685,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 11868,
        "total_tokens": 14035,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10685,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **negative-feedback current-to-voltage converter (transimpedance stage)** with a very low input resistance.\n\nLet \\(V_x\\) be the node joining the source of \\(M_1\\), drain of \\(M_2\\), and input current source. Denote the unlabeled downward bias current by \\(I_B\\). Here \\(M_1\\) is NMOS and \\(M_2\\) is PMOS.\n\nAssume ideal bias current sources, a fixed \\(V_b\\), no output load, and both MOSFETs operating in saturation.\n\n## 1. DC operating point\n\nSince the gate of \\(M_2\\) draws no current, KCL at the output gives\n\\[\nI_{D1}=I_1.\n\\]\nAt the input node,\n\\[\nI_{\\rm in}+I_{D1}+I_{D2}=I_B,\n\\]\nso\n\\[\n\\boxed{I_{D2}=I_B-I_1-I_{\\rm in}}.\n\\]\n\nUsing square-law models and neglecting channel-length modulation and body effect,\n\\[\nV_x\\simeq V_b-V_{TN}-\\sqrt{\\frac{2I_1}{\\beta_1}},\n\\]\nand\n\\[\n\\boxed{\nV_{\\rm out}\\simeq V_{DD}-|V_{TP}|\n-\\sqrt{\\frac{2(I_B-I_1-I_{\\rm in})}{\\beta_2}}\n},\n\\]\nwhere \\(\\beta_i=\\mu_i C_{\\rm ox}(W/L)_i\\).\n\nThus, \\(V_b\\) sets the input-node voltage, while **increasing \\(I_{\\rm in}\\) increases \\(V_{\\rm out}\\)**.\n\n## 2. Feedback mechanism\n\nIf \\(I_{\\rm in}\\) increases:\n\n1. \\(V_x\\) initially rises.\n2. The \\(V_{GS}\\) and drain current of \\(M_1\\) decrease.\n3. The fixed current \\(I_1\\) charges the output node, raising \\(V_{\\rm out}\\).\n4. The higher PMOS gate voltage reduces \\(I_{D2}\\), counteracting the original rise in \\(V_x\\).\n\nThis negative feedback holds the input voltage nearly constant.\n\n## 3. Small-signal behavior\n\nTreat \\(V_{DD}\\) and \\(V_b\\) as AC ground. Retain transistor output resistances \\(r_{o1}\\) and \\(r_{o2}\\), but initially neglect body effect.\n\nBecause the ideal source \\(I_1\\) supplies no incremental current,\n\\[\n0=g_{o1}v_{\\rm out}-(g_{m1}+g_{o1})v_x.\n\\]\nDefine\n\\[\nA\\equiv1+g_{m1}r_{o1},\n\\]\ngiving\n\\[\nv_{\\rm out}=A v_x.\n\\]\n\nAt the input node, the incremental current through \\(M_1\\) is zero, so\n\\[\ni_{\\rm in}=g_{m2}v_{\\rm out}+g_{o2}v_x.\n\\]\n\nTherefore, the transimpedance is\n\\[\n\\boxed{\nZ_T=\\frac{v_{\\rm out}}{i_{\\rm in}}\n=\\frac{A}{g_{m2}A+g_{o2}}\n}\n\\]\nand the input resistance is\n\\[\n\\boxed{\nR_{\\rm in}=\\frac{v_x}{i_{\\rm in}}\n=\\frac{1}{g_{m2}A+g_{o2}}.\n}\n\\]\n\nFor \\(g_{m1}r_{o1}\\gg1\\) and sufficiently large \\(r_{o2}\\),\n\\[\n\\boxed{Z_T\\approx+\\frac{1}{g_{m2}}},\n\\qquad\n\\boxed{R_{\\rm in}\\approx\\frac{1}{g_{m1}g_{m2}r_{o1}}}.\n\\]\n\nThus, the feedback makes the input resistance much smaller than the usual common-gate value \\(1/g_{m1}\\).\n\nWith the input current source set to zero—an open circuit—the output resistance is\n\\[\nR_{\\rm out}\n=\\frac{A+r_{o1}/r_{o2}}{g_{m2}A+1/r_{o2}}\n\\approx\\frac{1}{g_{m2}}.\n\\]\n\nIf \\(M_1\\) has body effect, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\) in these small-signal expressions.\n\n## 4. Operating limits\n\nThe PMOS must remain on:\n\\[\nI_B-I_1-I_{\\rm in}>0.\n\\]\nUnder the DC approximations above, the output range is approximately\n\\[\nV_b-V_{TN}\\le V_{\\rm out}<V_{DD}-|V_{TP}|,\n\\]\nalso subject to the compliance requirements of the bias current sources.\n\n**In summary:** the circuit accepts current at a nearly fixed input voltage and produces a positive output-voltage change of approximately \\(i_{\\rm in}/g_{m2}\\). Numerical results require the bias-current values and transistor parameters.",
        "format": "markdown",
        "sha256": "dfbce14f5a657c2e51bd669399b318a9bab4feaa529d79f5f5115b242f1c57b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device and PMOS feedback device, explains the feedback from Vout back to the input node, and derives the very low input resistance and transimpedance of approximately 1/gm2. The extra operating-point detail does not undermine the essential analysis.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 9897,
        "total_tokens": 12064,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 9897,
        "total_tokens": 12064,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not for arbitrarily large but finite capacitances**, assuming the inverters have sufficient gain to sustain oscillation. Increasing all three capacitances mainly slows the circuit down.\n\nEach inverter must charge or discharge its load before the next inverter switches. With finite output drive,\n\\[\nt_p\\propto C_L,\n\\qquad\nf_{\\mathrm{osc}}\\approx\\frac{1}{2(3)t_p}\n=\\frac{1}{6t_p}\\propto\\frac{1}{C_L}.\n\\]\nThus, when capacitive loading dominates the delay, multiplying all three capacitances by \\(k\\) approximately multiplies the oscillation period—and the startup time—by \\(k\\). There is no finite capacitance threshold at which oscillation must stop merely because the loads are large.\n\nThe **strict limit \\(C_L\\to\\infty\\)** is different: \\(f_{\\mathrm{osc}}\\to0\\). With finite charging current, an infinite capacitor’s voltage cannot change over any finite time, so there is no finite-frequency oscillation in that limit.",
        "format": "markdown",
        "sha256": "5b2ea953550d9f524c9a07b5893e8b5986203045f737f5435d7b2cb8c1e56413"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that arbitrarily large finite capacitances slow the ring rather than stop it, with frequency scaling approximately as 1/CL. The strict infinite-capacitance limit is a valid boundary-case qualification, not a contradiction of the answer for finite loads.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 2815,
        "total_tokens": 5012,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 2815,
        "total_tokens": 5012,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—for arbitrarily large but finite capacitors, provided the inverters have sufficient gain.** Increasing all three equal capacitances mainly slows the oscillator.\n\nFor example, model each inverter as\n\\[\nH(s)=\\frac{-A_0}{1+sR_oC_L},\n\\]\nwhere \\(A_0\\) is its low-frequency gain magnitude. The three-stage loop meets the phase condition when\n\\[\n\\omega_0R_oC_L=\\sqrt3.\n\\]\nAt that frequency, the loop-gain magnitude is \\((A_0/2)^3\\). Thus the startup requirement \\(A_0>2\\) is **independent of \\(C_L\\)**, while the characteristic oscillation frequency scales as\n\\[\nf_{\\text{osc}}\\propto\\frac{1}{C_L}.\n\\]\n\nLarger capacitors therefore give slower oscillations and longer startup times, rather than an intrinsic finite-capacitance cutoff.\n\nIn the **strict limit \\(C_L=\\infty\\)**, however, finite inverter currents cannot change the capacitor voltages: the frequency tends to zero, so there is no time-varying oscillation.",
        "format": "markdown",
        "sha256": "5dcb9a058fe60fc0af17cd2f5d70c0e6a321985f51af252ccaa00a6f464e7123"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly shows that for arbitrarily large but finite equal capacitors the oscillation frequency falls as 1/CL while the gain condition is independent of CL. The strict infinite-capacitance limit caveat does not change that conclusion.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 2834,
        "total_tokens": 5031,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 2834,
        "total_tokens": 5031,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Not for any finite capacitance, assuming the inverters have sufficient gain.** Increasing all three capacitors makes their node voltages charge and discharge more slowly, so the oscillation frequency decreases rather than oscillation disappearing.\n\nFor a three-stage ring oscillator,\n\\[\nf_{\\mathrm{osc}}\\approx \\frac{1}{6t_{\\mathrm{pd}}},\n\\qquad t_{\\mathrm{pd}}\\propto C_L,\n\\]\nso \\(f_{\\mathrm{osc}}\\propto 1/C_L\\). In the usual model, increasing all three capacitances equally simply stretches the waveform’s time scale; the loop’s oscillation conditions occur at a lower frequency.\n\nThe distinction is between **arbitrarily large but finite** capacitance and **infinite** capacitance: as \\(C_L\\to\\infty\\), the frequency tends to zero. An actually infinite capacitor could not have its voltage changed by a finite current in finite time. Practical leakage and other nonidealities may impose additional limits, but large ideal capacitance alone creates no finite cutoff.",
        "format": "markdown",
        "sha256": "c05440b29737461967a1f8c6056defe05b4e5152f7bf457904d796bddf629bd4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating for arbitrarily large finite capacitances, with frequency decreasing roughly as 1/C_L. The delay-based justification satisfies the full-credit rule.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 3328,
        "total_tokens": 5525,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 3328,
        "total_tokens": 5525,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise improves by approximately \\(6\\,\\text{dB}\\) at a fixed absolute offset from the carrier**, assuming unchanged inverters and supply voltage.\n\nDoubling each \\(C_L\\):\n- Doubles the stage delay, so the oscillation frequency is halved.\n- Doubles the signal charge swing, \\(q_{\\max}=C_LV_{\\text{swing}}\\), while leaving the transistor noise-current strength essentially unchanged.\n\nIn the usual white-noise-dominated region,\n\\[\n\\mathcal L(\\Delta f)\\propto\n\\frac{S_i}{q_{\\max}^{\\,2}(\\Delta f)^2}.\n\\]\nThus,\n\\[\n\\mathcal L_{\\text{new}}(\\Delta f)\n=\\frac14\\mathcal L_{\\text{old}}(\\Delta f),\n\\]\na reduction of \\(10\\log_{10}4\\approx6\\,\\text{dB}\\).\n\nAt the same **fractional offset** \\(\\Delta f/f_0\\), however, the phase noise in dBc/Hz is approximately unchanged in this region.",
        "format": "markdown",
        "sha256": "79fcbd0241297287742417c849c40d4db52f09cc3f7c8c3fed873b693cf66fb4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by about 6 dB at a fixed absolute offset; the fixed fractional-offset qualification is also correct.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 3337,
        "total_tokens": 5531,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 3337,
        "total_tokens": 5531,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise decreases by approximately 6 dB at a fixed frequency offset**, assuming the inverters and supply remain unchanged and \\(C_L\\) dominates the loading.\n\nDoubling each \\(C_L\\):\n- Doubles the stage delay, so the oscillation frequency is halved.\n- Doubles the charge swing \\(q_{\\rm sw}=C_LV_{\\rm sw}\\), while the device-noise currents remain approximately unchanged.\n\nSince phase-noise power scales inversely with charge swing squared,\n\\[\n\\mathcal L_{\\rm new}(\\Delta f)\n=\\frac14\\,\\mathcal L_{\\rm old}(\\Delta f),\n\\]\na change of \\(10\\log_{10}(1/4)\\approx-6\\,\\mathrm{dB}\\).\n\nThe fixed-offset qualification matters: at the same **fractional** offset \\(\\Delta f/f_0\\), the white-noise-limited phase noise is approximately unchanged.",
        "format": "markdown",
        "sha256": "31aba82605978966f6ac19caba80a5eec5948ed115be745f15d303af80f233ce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and lowers phase noise by about 6 dB (a factor of four) at fixed offset, with the expected unchanged result at fixed fractional offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 4342,
        "total_tokens": 6536,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 4342,
        "total_tokens": 6536,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise improves by approximately 6 dB at a fixed frequency offset**, assuming unchanged inverters, supply voltage, and thermal-noise sources.\n\nDoubling each \\(C_L\\) doubles the stage delay, so the oscillation frequency halves:\n\\[\nt_d\\propto C_L,\\qquad f_{\\mathrm{osc}}=\\frac{1}{6t_d}.\n\\]\n\nThe voltage swing stays approximately constant, while the stored charge \\(Q=C_LV_{\\text{swing}}\\) doubles. Since phase-noise power scales as \\(1/Q^2\\),\n\\[\n\\mathcal L_{\\text{new}}(\\Delta f)=\\frac{\\mathcal L_{\\text{old}}(\\Delta f)}{4},\n\\]\ngiving \\(10\\log_{10}(1/4)\\approx-6\\,\\text{dB}\\).\n\nThis improvement comes with **half the oscillation frequency**; at the same fractional offset \\(\\Delta f/f_{\\mathrm{osc}}\\), thermal phase noise is approximately unchanged.",
        "format": "markdown",
        "sha256": "7966c372a4441921db7060c3ea8ddd5445a5c6b33c56240682c3a89b0c97fb0b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states a roughly 6 dB (fourfold) phase-noise reduction at fixed offset, explains that doubled capacitance halves the oscillation frequency, and notes the unchanged result at fixed fractional offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 3323,
        "total_tokens": 5517,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 3323,
        "total_tokens": 5517,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—for ordinary, finite-gain inverters, a sufficiently large \\(C_L\\) can stop oscillation**, rather than merely reduce its frequency.\n\nLoading just one stage creates a **dominant pole**. The ring then behaves as a stable negative-feedback system: its loop gain falls below unity before the other stages supply enough additional phase lag for oscillation. It can settle at an analog operating point near the inverters’ switching voltages; an odd number of inversions only rules out a consistent *binary* operating point.\n\nFor example, model each inverter with DC gain magnitude \\(A\\), the two unloaded stages with time constant \\(\\tau\\), and the loaded stage with \\(\\tau_L\\). The loop transfer is\n\\[\nL(s)=\\frac{-A^3}{(1+s\\tau_L)(1+s\\tau)^2}.\n\\]\nWhen \\(\\tau_L\\gg\\tau\\), the phase condition for oscillation occurs near \\(\\omega=1/\\tau\\), where\n\\[\n|L(j\\omega)|\\approx \\frac{A^3\\tau}{2\\tau_L}\n\\longrightarrow 0\n\\qquad(C_L\\to\\infty).\n\\]\nThus, for sufficiently large \\(C_L\\), the phase and gain conditions cannot both be met.\n\nAn ideal Boolean or infinite-gain inverter model can miss this stabilization and misleadingly predict continued oscillation for every finite load.",
        "format": "markdown",
        "sha256": "23577e4c7b89fb6210f45e18d83bebd3f6c5e1973387ce3892235d88ae41421c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large loading on one node can stop oscillation, and explains the dominant-pole gain/phase failure and possible settling at an analog operating point. The illustrative finite-gain model and asymptotic trend support the golden solution without contradicting it.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 5671,
        "total_tokens": 7723,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5370,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 5671,
        "total_tokens": 7723,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5370,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—for real, finite-gain inverters, sufficiently large \\(C_L\\) can stop oscillation, rather than merely lower its frequency.**\n\nIncreasing \\(C_L\\) creates a dominant low-frequency pole at the loaded node. Eventually, at the frequency where the other two stages provide the additional phase shift needed for oscillation, the loaded stage attenuates the signal so much that the loop gain is below unity. The circuit then behaves as a stable negative-feedback system.\n\nFor example, model each inverter as having DC gain \\(-A\\), with time constant \\(\\tau_L\\) for the loaded stage and \\(\\tau\\) for the other two. The loop gain is\n\\[\nL(s)=\\frac{-A^3}{(1+s\\tau_L)(1+s\\tau)^2}.\n\\]\nWriting \\(r=\\tau_L/\\tau\\), the characteristic equation shows that the DC operating point is stable when\n\\[\nA^3<2\\left(r+2+\\frac1r\\right).\n\\]\nFor any fixed, finite \\(A\\), this condition is eventually satisfied as \\(C_L\\), and hence \\(r\\), becomes sufficiently large.\n\nThe nodes can therefore settle at an **intermediate analog voltage**, typically near the inverter switching point. An odd number of inverters rules out a consistent rail-to-rail logic state, but it does **not** rule out a stable analog operating point. An ideal logic-with-delay model misses this possibility.",
        "format": "markdown",
        "sha256": "4d2934fed927c4ec7d35b5f897393d340a1b709e323a395656f4dd8f79ddc56a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large capacitance on one node can stop oscillation, and explains the dominant-pole gain roll-off and failure of the loop condition. The finite-gain model and stable analog operating-point explanation are consistent with the golden solution.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 6466,
        "total_tokens": 8518,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 6466,
        "total_tokens": 8518,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—for ordinary, finite-gain inverters, a sufficiently large \\(C_L\\) can stop oscillation**, rather than merely reduce its frequency.\n\nThe large capacitance makes the first inverter’s output pole dominant. At low frequencies, the other two inverters respond almost instantaneously and together act as a noninverting buffer. The circuit then behaves approximately as a **single-pole negative-feedback loop**, which settles to a DC operating point near the inverter switching thresholds.\n\nEquivalently, the three inversions require an additional \\(180^\\circ\\) of frequency-dependent phase lag for oscillation. The heavily loaded stage supplies at most \\(90^\\circ\\); the other stages supply the remaining lag only at much higher frequencies, where the loaded stage’s attenuation becomes so large that the loop gain falls below unity.\n\nAn ideal Boolean gate-delay model may predict only a longer oscillation period, but it misses this analog stability effect.",
        "format": "markdown",
        "sha256": "387d395273e3dc0aea491ef1de7cd4ba912638603bfef959aa1bbc0a52c8ce70"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large loading can stop oscillation and explains the dominant-pole gain roll-off that prevents the loop from meeting the oscillation condition. The additional phase and time-domain explanations are consistent with the essential mechanism.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 4687,
        "total_tokens": 6739,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4494,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 4687,
        "total_tokens": 6739,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4494,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise ideally decreases by about 3 dB**—a factor of two in noise power.\n\nFor this CMOS ring oscillator, assuming fixed \\(V_{DD}\\), channel lengths, and transistor-dominated loading:\n\n- Drive current and node capacitance both double, so the stage delay \\(t_d\\sim CV_{DD}/I\\) and oscillation frequency remain approximately unchanged.\n- The transistor noise-current PSD doubles, but the squared sensitivity to that noise falls by four because the capacitance doubles.\n\nThus,\n\\[\n\\frac{\\mathcal L_{\\text{new}}}{\\mathcal L_{\\text{old}}}\n\\approx \\frac{2}{2^2}=\\frac12.\n\\]\n\nThe tradeoff is approximately **twice the power consumption**.",
        "format": "markdown",
        "sha256": "f2929e563d58a9335d404dac69ebd44cc92abdf6896d051c2de76d964ba52508"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts a roughly 3 dB reduction and gives a valid width-scaling explanation: current-noise PSD doubles while the squared capacitive transfer falls by four. It also correctly notes the approximate frequency and power tradeoffs.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3327,
        "output_tokens": 1541,
        "total_tokens": 4868,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1376,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3327,
        "output_tokens": 1541,
        "total_tokens": 4868,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1376,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise decreases by approximately 3 dB**—its power spectral density is halved—assuming fixed \\(V_{DD}\\), fixed channel lengths, and loading dominated by transistor capacitances.\n\nWhen all NMOS and PMOS widths double:\n\n- **Drive currents and node capacitances both double**, so the stage delay remains approximately constant:\n  \\[\n  t_d\\sim\\frac{CV_{DD}}{I}.\n  \\]\n  Thus, the oscillation frequency is nearly unchanged.\n- **Device noise-current spectral density doubles**, since it scales with \\(g_m\\).\n- **Signal charge swing \\(q_{\\max}=CV_{\\text{swing}}\\) doubles**.\n\nAt a fixed frequency offset, phase noise scales as\n\\[\n\\mathcal L\\propto\\frac{S_i}{q_{\\max}^{\\,2}},\n\\]\ngiving\n\\[\n\\frac{\\mathcal L_{\\text{new}}}{\\mathcal L_{\\text{old}}}\n=\\frac{2}{2^2}=\\frac12\n\\quad\\Rightarrow\\quad \\boxed{\\Delta\\mathcal L\\approx-3\\ \\text{dB}}.\n\\]\n\nThe tradeoff is approximately **twice the power consumption**.",
        "format": "markdown",
        "sha256": "2bcf2f77df6789bd4833850842691833e73eac4754d3c9c53ea0206672d32337"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes an approximately 3 dB phase-noise reduction and supports it with the proper scaling: noise-current power doubles while signal charge doubles, yielding half the noise-to-signal ratio. The frequency and power tradeoffs are also consistent.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 1710,
        "total_tokens": 5037,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1448,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 1710,
        "total_tokens": 5037,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1448,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise improves by approximately 3 dB**—its power spectral density is halved—assuming fixed \\(V_{DD}\\), fixed channel lengths, and transistor-dominated loading.\n\nDoubling all NMOS and PMOS widths gives:\n- **Twice the drive current and node capacitance**, so \\(t_d\\sim CV_{DD}/I\\) and the oscillation frequency remain approximately unchanged.\n- **Twice the transistor noise-current PSD**, but also twice the signal charge swing \\(q_{\\max}=CV_{DD}\\).\n\nSince phase noise at a fixed offset scales as \\(S_i/q_{\\max}^2\\),\n\\[\n\\frac{\\mathcal L_{\\text{new}}}{\\mathcal L_{\\text{old}}}\n\\approx \\frac{2}{2^2}=\\frac12,\n\\]\ncorresponding to **−3 dB**. The cost is approximately twice the power consumption.",
        "format": "markdown",
        "sha256": "3be05fc1dd31d825ef06f4a23a798037fe53b6e70e75fbee17e6cfcab78689c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives an approximately 3 dB reduction and supports it with the valid width-scaling argument: noise-current PSD doubles while signal charge doubles, halving the noise-to-signal ratio.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3327,
        "output_tokens": 2211,
        "total_tokens": 5538,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2013,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3327,
        "output_tokens": 2211,
        "total_tokens": 5538,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2013,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume three identical **CMOS inverters**, and use the small-signal model about their symmetric dc operating point.\n\nApply a test voltage \\(v_x\\) to the supply. By symmetry, all three inverter outputs have the same incremental voltage \\(v\\). Each transistor therefore has its gate and drain at the same small-signal voltage—i.e., it is effectively diode-connected for this perturbation.\n\nNeglecting transistor output resistances,\n\\[\ng_{mn}v=g_{mp}(v_x-v).\n\\]\nThe total supply current is\n\\[\ni_x=3g_{mp}(v_x-v)\n   =3\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}\\,v_x.\n\\]\nConsequently,\n\\[\n\\boxed{R_X=\\frac{v_x}{i_x}\n=\\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)}.\n\\]\n\nFor \\(g_{mn}=g_{mp}=g_m\\),\n\\[\n\\boxed{R_X=\\frac{2}{3g_m}}.\n\\]\n\nIncluding finite output resistances, replace each \\(1/g_m\\) by \\(1/(g_m+g_o)\\).\n\n*This is the symmetric dc-bias small-signal result. For an already oscillating ring, the low-frequency, cycle-averaged resistance is instead \\(\\bigl(d\\overline I_{DD}/dV_{DD}\\bigr)^{-1}\\), which requires a switching/load model.*",
        "format": "markdown",
        "sha256": "da1e44a3b75b8f37443b4f5a8f2a4b2e9ea07df55113d6ee19dcf246bb3c126d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance rather than the resistance dominated by oscillation-driven charging and discharging of the node capacitances. Its caveat recognizes that an oscillating ring requires a cycle-averaged model, but it does not provide the relevant mechanism or result.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3147,
        "output_tokens": 6862,
        "total_tokens": 10009,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6530,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3147,
        "output_tokens": 6862,
        "total_tokens": 10009,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6530,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For an oscillating ring, the relevant quantity is the **incremental, cycle-averaged supply resistance**:\n\\[\nR_X=\\left(\\frac{d\\overline I_{DD}}{dV_{DD}}\\right)^{-1}.\n\\]\n\nAssume each inverter drives a capacitance \\(C_L\\), and neglect leakage and short-circuit current. Each capacitance draws charge \\(C_LV_{DD}\\) from the supply once per oscillation period, so\n\\[\n\\overline I_{DD}=3C_LV_{DD}f_{\\mathrm{osc}}(V_{DD}).\n\\]\nConsequently,\n\\[\n\\boxed{\nR_X=\n\\frac{1}{3C_L\\left(f_{\\mathrm{osc}}\n+V_{DD}\\dfrac{df_{\\mathrm{osc}}}{dV_{DD}}\\right)}\n}.\n\\]\nThe frequency dependence must be included because changing the supply also changes the oscillation frequency.\n\nFor the usual square-law delay approximation,\n\\[\nt_d\\propto\\frac{C_LV_{DD}}{(V_{DD}-V_T)^2},\n\\qquad f_{\\mathrm{osc}}=\\frac{1}{6t_d},\n\\]\nand therefore \\(\\overline I_{DD}\\propto(V_{DD}-V_T)^2\\). Thus,\n\\[\n\\boxed{R_X\\approx\\frac{V_{DD}-V_T}{2\\overline I_{DD}}}.\n\\]\nIf \\(V_T\\) is neglected, this becomes \\(R_X\\approx V_{DD}/(2\\overline I_{DD})\\), a positive resistance. A numerical value requires inverter parameters and an operating supply voltage.",
        "format": "markdown",
        "sha256": "3a02812737791d5eee8f14c7b135324a4e992431f9c017157c9817298b933040"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies oscillation-driven charging of the three load capacitances as the supply-current mechanism and derives the incremental resistance including the frequency’s supply dependence. The square-law delay refinement is consistent with that model.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 9682,
        "total_tokens": 12829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 9682,
        "total_tokens": 12829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume three identical CMOS inverters, linearized about their symmetric dc operating point, and neglect channel-length modulation.\n\nApply a small test voltage \\(v_x\\) at the supply. By symmetry, all three internal nodes have the same incremental voltage \\(v\\). For each inverter, equality of NMOS and PMOS incremental currents gives\n\\[\ng_{mn}v=g_{mp}(v_x-v),\n\\]\nso\n\\[\nv=\\frac{g_{mp}}{g_{mn}+g_{mp}}\\,v_x.\n\\]\n\nThe total current drawn from the test source is therefore\n\\[\ni_x=3g_{mn}v\n   =3\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}\\,v_x.\n\\]\n\nThus,\n\\[\n\\boxed{R_X=\\frac{v_x}{i_x}\n=\\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)}.\n\\]\n\nFor matched transconductances, \\(g_{mn}=g_{mp}=g_m\\),\n\\[\n\\boxed{R_X=\\frac{2}{3g_m}}.\n\\]\n\nThis is the dc-bias small-signal result. The cycle-averaged resistance of an already oscillating ring instead requires its supply-current characteristic, \\(R_X=(d\\overline I_{DD}/dV_{DD})^{-1}\\).",
        "format": "markdown",
        "sha256": "deb4e8c865104f332298e61b613db400493856e2d8465f6c9eec17e28ebf6b3b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a consistent gm-based resistance at the static bias point, but does not determine the oscillating ring’s resistance from load-capacitance charging and discharging, the dominant mechanism.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3147,
        "output_tokens": 4738,
        "total_tokens": 7885,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3147,
        "output_tokens": 4738,
        "total_tokens": 7885,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**In general, yes—if \\(R_X\\) means the supply resistance of the running oscillator.** The quoted expression describes a different operating state.\n\n### Where the quoted result comes from\n\nAt the **symmetric DC equilibrium**, all three inverter nodes have the same voltage. For identical stages, a DC supply perturbation likewise produces equal node perturbations \\(\\delta v\\). Neglecting output conductances,\n\\[\ng_{mn}\\delta v=g_{mp}(\\delta V_{DD}-\\delta v).\n\\]\nThus\n\\[\n\\delta I_{DD}\n=3\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}\\,\\delta V_{DD},\n\\]\nwhich gives the stated \\(R_X\\).\n\nOnly for this particular perturbation are each inverter’s input and output incrementally equal, justifying the diode-connected equivalent. That DC equilibrium still exists mathematically even if it is unstable.\n\n### While the oscillator is running\n\nThe internal voltages are not equal, and the transistor operating points vary throughout the cycle. Small-signal analysis must now be performed about a **periodic trajectory**, not that DC equilibrium.\n\nFor supply changes slow enough that the oscillator follows its steady oscillating state, the relevant resistance is\n\\[\n\\boxed{\nR_{X,\\mathrm{slow}}\n=\\left(\\frac{d\\overline I_{DD}}{dV_{DD}}\\right)^{-1}\n}\n\\]\nwhere \\(\\overline I_{DD}\\) is the cycle-averaged supply current. This derivative includes changes in oscillation frequency, waveform, and amplitude.\n\nFor example, a simple full-swing switching model gives\n\\[\n\\overline I_{DD}\\approx 3C_LV_{DD}f_{\\mathrm{osc}}(V_{DD})\n+\\overline I_{\\mathrm{sc}}+\\overline I_{\\mathrm{leak}},\n\\]\nso\n\\[\nR_{X,\\mathrm{slow}}^{-1}\\approx\n3C_L\\!\\left(f_{\\mathrm{osc}}\n+V_{DD}\\frac{df_{\\mathrm{osc}}}{dV_{DD}}\\right)\n+\\frac{d\\overline I_{\\mathrm{sc}}}{dV_{DD}}\n+\\frac{d\\overline I_{\\mathrm{leak}}}{dV_{DD}}.\n\\]\nThere is no general reason for this to equal the DC-equilibrium conductance.\n\nAt higher perturbation frequencies, the supply response is a frequency-dependent, periodically time-varying small-signal impedance, potentially involving frequency conversion.\n\n**So there is no universal “oscillation correction factor.”** The original expression can remain correct for a DC operating-point analysis while not describing the actual running oscillator.",
        "format": "markdown",
        "sha256": "1ccdde999902dee99ba90715f601b3f8023237467af412d2e51138ea6278da4e"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It distinguishes the DC equilibrium from the running oscillator and identifies capacitive switching as a source of average supply current. But it does not establish the dynamic resistance or the key conclusion that its magnitude remains on the order of the MOS on-resistance, rather than becoming much larger.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 6454,
        "output_tokens": 14606,
        "total_tokens": 21060,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3227,
        "output_tokens": 7303,
        "total_tokens": 10530,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**That expression is a DC-equilibrium result; it is not generally the supply resistance of the running oscillator.**\n\n### Why the expression works at DC\nFor three identical inverters at the symmetric DC equilibrium, all three interstage voltages are equal. Under a static supply perturbation, they also change equally. Thus each inverter’s input and output have the same incremental voltage, making its transistors *effectively* diode-connected for this calculation.\n\nNeglecting output conductance, this gives\n\\[\nR_{X,\\mathrm{DC}}\\approx\\frac13\n\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right).\n\\]\nThat equilibrium can exist mathematically even though it is unstable and the physical circuit oscillates.\n\n### What changes during oscillation\nDuring oscillation, an inverter’s input and output are not equal. Its devices change operating regions, their transconductances vary with time, and capacitive charging contributes to the supply current. The diode-connected argument therefore no longer applies.\n\nFor a **very slow supply perturbation**, a useful resistance is\n\\[\n\\boxed{\nR_{X,\\mathrm{LF}}=\n\\left(\\frac{d\\overline I_{\\mathrm{DD}}}{dV_{\\mathrm{DD}}}\\right)^{-1}\n}\n\\]\nwhere the average current is measured in oscillating steady state at each supply voltage. This derivative includes the change in oscillation frequency.\n\nFor example, with three identical load capacitances \\(C_L\\), rail-to-rail switching, and negligible short-circuit and leakage currents,\n\\[\n\\overline I_{\\mathrm{DD}}\\approx\n3C_LV_{\\mathrm{DD}}f_{\\mathrm{osc}}(V_{\\mathrm{DD}}),\n\\]\nso\n\\[\nR_{X,\\mathrm{LF}}\\approx\n\\frac{1}{\n3C_L\\left(f_{\\mathrm{osc}}\n+V_{\\mathrm{DD}}\\frac{df_{\\mathrm{osc}}}{dV_{\\mathrm{DD}}}\\right)\n}.\n\\]\nThere is no general reason for this to equal the quoted transconductance expression.\n\nAt higher perturbation frequencies, the running oscillator requires a periodic small-signal analysis: the supply response can be complex and can contain frequency-converted components.\n\nSo **the original formula remains the answer for the static-equilibrium linearization, but generally not for the oscillator in operation**.",
        "format": "markdown",
        "sha256": "aa5cb9cb5ec56deda2a672c8a51853991dd64abf86d7f336902c602b53f52b73"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies capacitive charging as the oscillating supply-current mechanism and gives the average-current relation, but does not establish that the resulting resistance remains on the order of the MOS on-resistance or is not much higher than the static estimate.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 6448,
        "input_tokens": 6454,
        "output_tokens": 11918,
        "total_tokens": 18372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10918,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 5959,
        "total_tokens": 9186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5459,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**That expression describes the symmetric, nonoscillating DC operating point—not generally the running oscillator.**\n\nAt that DC point, all three internal node voltages are equal. A symmetric, quasistatic supply perturbation therefore makes each inverter *effectively* diode-connected. Neglecting output conductance, the incremental current in one inverter satisfies\n\\[\n\\delta i=g_{mn}\\delta v\n       =g_{mp}(\\delta V_{DD}-\\delta v).\n\\]\nWith three such branches in parallel, this gives\n\\[\nR_X=\\frac13\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right).\n\\]\nThis remains the formal DC-operating-point result even if that operating point is unstable.\n\n**During oscillation, however, an inverter’s input and output are not equal.** Its devices change operating regions throughout the cycle, and their transconductances are time-varying. The diode-connected argument no longer applies.\n\nFor a slow supply perturbation, a useful definition is the incremental resistance based on **cycle-averaged supply current**:\n\\[\nR_{X,\\mathrm{LF}}\n=\\left(\\frac{d\\overline I_{DD}}{dV_{DD}}\\right)^{-1},\n\\]\nwhere the derivative follows the running oscillator’s steady-state behavior, including its changing frequency and waveform.\n\nFor example, with identical, approximately constant load capacitances \\(C_L\\) and rail-to-rail switching,\n\\[\n\\overline I_{DD}\\approx\n3C_LV_{DD}f_{\\rm osc}(V_{DD})\n+\\overline I_{\\rm sc}+I_{\\rm leak}.\n\\]\nThus,\n\\[\nR_{X,\\mathrm{LF}}\\approx\n\\left[\n3C_L\\left(f_{\\rm osc}\n+V_{DD}\\frac{df_{\\rm osc}}{dV_{DD}}\\right)\n+\\frac{d(\\overline I_{\\rm sc}+I_{\\rm leak})}{dV_{DD}}\n\\right]^{-1}.\n\\]\nThis is generally not the quoted fixed-\\(g_m\\) expression.\n\nAt higher perturbation frequencies, one must consider the oscillator’s periodic small-signal impedance, including frequency conversion and capacitive effects, rather than a single resistance.\n\nSo the distinction is: **the formal DC result stays the same; the actual supply response about the oscillating state must be analyzed separately.**",
        "format": "markdown",
        "sha256": "7f805a7b75b7ddc13cf3fd0112cfeebfdcebe54ed4bb51935d1ca06fdc1b4675"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the oscillating circuit’s capacitive charging current and gives a cycle-averaged supply-current expression, but it never compares the resulting resistance with the static estimate or concludes that it remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 6448,
        "input_tokens": 6454,
        "output_tokens": 11370,
        "total_tokens": 17824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10356,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 5685,
        "total_tokens": 8912,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **initial voltage-gain magnitude decreases** as \\(M_7\\) becomes wider.\n\nA wider \\(M_7\\) increases the tail current, so nodes \\(P\\) and \\(Q\\) discharge faster, shortening the initial amplification interval before regeneration. Approximately,\n\\[\n|A_{\\text{init}}|\\approx \\frac{g_m t_{\\text{amp}}}{C}\n\\propto \\frac{g_m}{I_D}\n\\propto \\frac{1}{\\sqrt{I_D}},\n\\]\nunder square-law operation.\n\nThus, although the input pair’s transconductance increases, the shorter amplification time dominates, reducing the initial gain.",
        "format": "markdown",
        "sha256": "8a799c0373fe4d122df0a3c0ee4fa95b7f288b813579dcedab1c84db8b9f306d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the initial gain decreases as M7 widens and explains that higher tail current makes the relevant gm/ID factor decrease.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 2591,
        "total_tokens": 7394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2448,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 2591,
        "total_tokens": 7394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2448,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial (pre-regeneration) voltage gain **decreases in magnitude** as \\(M_7\\) becomes wider.\n\nA wider \\(M_7\\) increases the tail current, causing nodes \\(P\\) and \\(Q\\) to discharge faster and shortening the initial amplification interval. Approximately,\n\\[\n|A_{\\text{init}}|\\sim \\frac{g_m t_{\\text{amp}}}{C}\n\\propto \\frac{g_m}{I_{\\text{tail}}}.\n\\]\nUnder the square-law model, \\(g_m\\propto\\sqrt{I_{\\text{tail}}}\\), so\n\\[\n|A_{\\text{init}}|\\propto \\frac{1}{\\sqrt{I_{\\text{tail}}}}.\n\\]\nThus, the shorter amplification time outweighs the increase in transconductance.",
        "format": "markdown",
        "sha256": "fdb838710abe68eb8ffcceddec9090ed2a3bd9dea127b7a1c75650dd08eb701b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the initial gain decreases as wider M7 increases tail current, and gives a consistent explanation using the reduced gm-to-current scaling.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 3061,
        "total_tokens": 7864,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2881,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 3061,
        "total_tokens": 7864,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2881,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial (pre-regeneration) voltage gain **decreases** as \\(M_7\\) becomes wider.\n\nA wider \\(M_7\\) increases the tail current, causing \\(P\\) and \\(Q\\) to discharge faster and shortening the time available for initial amplification. Approximately,\n\\[\n|A_{\\text{init}}|\\approx \\frac{2g_{m1,2}V_{TN}}{I_{\\text{tail}}}.\n\\]\nSince \\(g_{m1,2}\\propto\\sqrt{I_{\\text{tail}}}\\) in strong inversion, the gain falls roughly as \\(1/\\sqrt{I_{\\text{tail}}}\\).",
        "format": "markdown",
        "sha256": "e3a1e66a799990f39a33ac4707febad0cb9ea9777900e62ddaaad03a13e87584"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the initial gain decreases as wider M7 raises tail current, and explains the trend using the gain’s gm/Itail dependence and gm ∝ √Itail.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 2216,
        "total_tokens": 7019,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 2216,
        "total_tokens": 7019,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The initial gain is approximately unchanged**, assuming the capacitances at P and Q are increased equally and gain is measured at the end of the initial amplification phase.\n\nDuring that phase,\n\\[\nA(t)\\approx \\frac{g_m t}{C_{P,Q}}.\n\\]\nLarger capacitance slows voltage development, but it also proportionally increases the time before \\(M_3\\) and \\(M_4\\) turn on:\n\\[\nt_a\\approx \\frac{C_{P,Q}V_{TH}}{I_{\\text{branch}}}.\n\\]\nThus,\n\\[\nA_{\\text{initial}}\\approx \\frac{g_mV_{TH}}{I_{\\text{branch}}},\n\\]\nso the capacitance cancels.\n\nThe main effect is **increased delay**. At a fixed time after the clock edge, however, the developed gain is smaller.",
        "format": "markdown",
        "sha256": "70e2edea70c80f2248f4a8845dc5808eedfeb69ad7d8cb38d1f37096c6abbabc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is approximately unchanged: the larger capacitance slows voltage development but proportionally lengthens the amplification phase, so it cancels from the gain. It also correctly identifies increased delay as the main effect.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 6401,
        "total_tokens": 11204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 6401,
        "total_tokens": 11204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **gain at the end of the initial amplification phase remains approximately unchanged**, assuming both capacitances increase equally.\n\nLarger capacitances slow the voltage changes at P and Q, but also extend the amplification time proportionally:\n\\[\n|A_{\\text{init}}|\\approx \\frac{g_m t_{\\text{init}}}{C},\n\\qquad\nt_{\\text{init}}\\approx \\frac{C V_{TH,n}}{I_D}.\n\\]\nThus,\n\\[\n|A_{\\text{init}}|\\approx \\frac{g_m V_{TH,n}}{I_D},\n\\]\nindependent of \\(C\\). The main effect is **greater delay**, not greater initial gain.",
        "format": "markdown",
        "sha256": "991db2d09faa353fa5eb1ab4173be14ccaa15687690bef6b8b95c87ea4793205"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain remains approximately unchanged: increased capacitance slows the node changes but proportionally extends the amplification phase, so capacitance cancels. The main effect is greater delay.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 3256,
        "total_tokens": 8059,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 3256,
        "total_tokens": 8059,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain remains approximately unchanged if both capacitances are increased equally.\n\nDuring initial amplification,\n\\[\nA_{\\text{init}}\\approx \\frac{g_m t_{\\text{amp}}}{C_{P,Q}}.\n\\]\nA larger capacitance slows the voltage buildup, but it also lengthens the amplification interval \\(t_{\\text{amp}}\\) proportionally. These effects cancel, so the main result is **increased delay**, not increased gain.",
        "format": "markdown",
        "sha256": "d17b5717dd58c38c36a015b97c07ba3a990f6d80c62756f1785fd481bddc7c4e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes the initial gain is approximately unchanged: the larger capacitance slows voltage buildup but proportionally extends the amplification interval, so the effects cancel. It also correctly notes increased delay.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 4242,
        "total_tokens": 9045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 4242,
        "total_tokens": 9045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**There is a trade-off—wider \\(M_5\\) and \\(M_6\\) do not necessarily make this StrongARM comparator faster.**\n\n- **Faster regeneration:** Increasing their widths increases the PMOS transconductance and pull-up strength, tending to accelerate positive feedback once they turn on.\n- **Slower initial discharge:** Their larger gate and drain capacitances load nodes \\(X\\) and \\(Y\\). At the beginning of evaluation, \\(M_5\\) and \\(M_6\\) are off, so this extra capacitance slows the output-node discharge and delays their turn-on.\n\nRoughly,\n\\[\nt_{\\text{decision}}\\approx t_{\\text{initial discharge}}+\n\\tau_{\\text{reg}}\\ln\\!\\left(\\frac{\\Delta V_{\\text{final}}}{\\Delta V_{\\text{initial}}}\\right),\n\\qquad\n\\tau_{\\text{reg}}\\approx\\frac{C_{\\text{node}}}{g_{m,\\text{effective}}}.\n\\]\n\nThus, upsizing can improve speed if the stronger regeneration outweighs the added capacitance, but excessive upsizing degrades it. **The total delay generally has an optimum sizing; the schematic alone cannot determine which effect dominates.**",
        "format": "markdown",
        "sha256": "aaeb1af31f3e323bdffe039af822438f442237abc1c66ee791159703c6bfffe7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies stronger regeneration and added node capacitance, and notes an optimum, but it does not give the key result that widening M5/M6 initially improves speed. Its claim that the schematic cannot determine which effect dominates misses the stated initial trend.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 2854,
        "total_tokens": 7656,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 2854,
        "total_tokens": 7656,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**It can improve or degrade speed—there is a sizing trade-off.** M5 and M6 are the cross-coupled PMOS devices in this StrongARM latch.\n\nIncreasing their widths has two competing effects:\n\n- **Stronger regeneration:** Their transconductance increases, strengthening positive feedback once they turn on. This tends to reduce the regeneration time constant:\n  \\[\n  \\tau_{\\rm reg}\\approx \\frac{C_{\\rm node}}{g_{m,\\rm eff}}.\n  \\]\n- **Greater capacitive loading:** Their gate and drain capacitances increase the capacitance at \\(X\\) and \\(Y\\). Initially, M5 and M6 are off, so the NMOS network must discharge this extra capacitance before the PMOS pair turns on. That increases the initial delay.\n\nThus, **upsizing helps if weak regeneration is the bottleneck, but hurts if the added capacitance dominates**. There is generally an optimum width; making M5 and M6 arbitrarily wide does not make the comparator faster.",
        "format": "markdown",
        "sha256": "08db8b7d5d06ec3acb1f026bde00f402775c3fc12297bb29271e7ea3116b90c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the PMOS regeneration benefit, added capacitance, and an optimum width, but misses the key conclusion that widening initially improves speed. It instead emphasizes an initial delay penalty from added capacitance, contrary to the golden solution's stated initial trend.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 3153,
        "total_tokens": 7955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2934,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 3153,
        "total_tokens": 7955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2934,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**It can do either—there is an optimum width.** \\(M_5\\) and \\(M_6\\) are the cross-coupled PMOS regeneration devices, so widening them has two competing effects:\n\n- **Slower initial sensing:** Their gate and drain capacitances increase the loading at \\(X\\) and \\(Y\\). Initially, \\(M_5\\) and \\(M_6\\) are off, so this added capacitance slows the discharge toward the point where they turn on.\n- **Stronger regeneration:** Once they turn on, their larger transconductance strengthens positive feedback. The approximate regeneration time constant is\n  \\[\n  \\tau_{\\rm reg}\\approx \\frac{C_{\\rm eff}}{g_{m,\\rm reg}},\n  \\]\n  and widening them increases both the numerator and denominator.\n\nThus, **moderate widening may improve a regeneration-limited design, but excessive widening can degrade the overall clock-to-output delay**. The schematic alone is insufficient to determine the net change; the existing sizes, currents, and output loading matter.",
        "format": "markdown",
        "sha256": "90deef2a58be4ac6c2f10adb5cc3a20b652e9d1e5cfb148d68d1a78721e09b57"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the cross-coupled PMOS devices and the tradeoff between stronger regeneration and added capacitance, but incorrectly says the initial sensing slows and does not give the required conclusion that widening initially improves speed.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 3188,
        "total_tokens": 7990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2960,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 3188,
        "total_tokens": 7990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2960,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**There is a trade-off: wider clocked transistors do not necessarily make this circuit faster.**\n\nIncreasing their widths has two competing effects:\n\n- **Lower on-resistance:** this speeds up charging and discharging through the series transistor stacks.\n- **Higher capacitance:** their diffusion capacitances increase the loading at \\(X\\) and \\(Y\\). Their gate capacitances also increase the load on the clock driver.\n\nA rough delay model is\n\\[\nt_d \\propto\n\\left(R_{\\text{data}}+\\frac{a}{W_{\\text{clk}}}\\right)\n\\left(C_{\\text{fixed}}+bW_{\\text{clk}}\\right).\n\\]\nThus, there is an optimum width.\n\nIf the clocked devices are initially too narrow, widening them **improves speed**. Once they are sufficiently strong, the nonclocked devices—such as \\(M_1\\)—limit the current. Further widening then mainly adds capacitance and **degrades speed**.\n\nSo, with the other devices fixed, widening already-strong clocked transistors makes the circuit slower; the schematic alone does not establish whether the present sizing is above or below the optimum.",
        "format": "markdown",
        "sha256": "f00da4802a61a4b0677d2db932d68fd24f5ef53003974262112542271ae31ce6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by lowering on-resistance, while added capacitance eventually limits or reverses the benefit, producing an optimum. Its qualification that the effect at the present sizing depends on where it lies relative to that optimum is consistent with the golden solution.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 3356,
        "total_tokens": 5419,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 3356,
        "total_tokens": 5419,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**There is a trade-off: increasing the clocked-transistor widths can improve speed initially, but excessive width degrades it.**\n\nThe clocked devices are in series with the data-controlled devices. Widening them:\n- **Reduces their on-resistance**, allowing nodes \\(X\\) and \\(Y\\) to charge or discharge faster.\n- **Increases parasitic capacitance** at \\(X\\), \\(Y\\), and the internal nodes. It also increases the clock load, potentially slowing the clock edges.\n\nA simple illustrative delay model is\n\\[\nt_d\\propto\n\\left(R_{\\text{data}}+\\frac{k}{W_{\\text{clk}}}\\right)\n\\left(C_0+cW_{\\text{clk}}\\right).\n\\]\nThe resistance benefit dominates for small clocked devices; the capacitance penalty dominates for sufficiently large ones.\n\nThus, **if the clocked devices are the bottleneck, widening them helps. If the unclocked devices such as \\(M_1\\) already limit the current, further widening mainly adds capacitance and slows the circuit.** There is an optimum width—not a universal “wider is faster” rule.",
        "format": "markdown",
        "sha256": "753862a1c626e8d48fdc9f4bb6144e6508c7760b6137a584d9e1a8dc9310a69b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by lowering the clocked devices’ on-resistance, while added capacitance eventually limits or reverses the benefit, giving an optimum width. The bottleneck caveat does not change that stated trend.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 2533,
        "total_tokens": 4596,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2284,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 2533,
        "total_tokens": 4596,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2284,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**There is a trade-off; increasing their widths does not always improve speed.**\n\nWider clocked transistors have:\n- **Lower on-resistance**, allowing \\(X\\) and \\(Y\\) to charge/discharge faster.\n- **Larger diffusion capacitance** at \\(X\\), \\(Y\\), and the internal stack nodes, which increases delay.\n- **Larger gate capacitance**, increasing the load on the clock driver.\n\nA simplified delay model is\n\\[\nt_d\\propto\n\\left(R_{\\text{data}}+\\frac{a}{W_{\\text{clk}}}\\right)\n\\left(C_{\\text{fixed}}+bW_{\\text{clk}}\\right),\n\\]\nwhere \\(R_{\\text{data}}\\) represents the resistance of the fixed-size, nonclocked transistors, such as \\(M_1\\).\n\nThus, **if the clocked devices are initially too small, widening them improves speed**. Once their resistance is sufficiently low, the nonclocked devices limit the charging/discharging current, and further widening mainly adds capacitance—**degrading speed**.\n\nConsequently, there is an optimum clock-transistor width; the schematic alone does not establish which side of that optimum the circuit occupies.",
        "format": "markdown",
        "sha256": "f0bc211fcee6df671f673a1795a3d62c5074810315cc5020ca35392f08f3c6a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by reducing clocked-transistor on-resistance, while added capacitance eventually limits or reverses the benefit, giving an optimum width. The caveat about the design’s position relative to that optimum is consistent with the golden solution.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 5100,
        "total_tokens": 7163,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4837,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 5100,
        "total_tokens": 7163,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4837,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—\\(X\\) and \\(Y\\) provide quadrature outputs at \\(f_{CK}/2\\)**, ideally with a 50%-duty-cycle clock.\n\n- **\\(CK=1\\):** The left clocked inverter is enabled, giving \\(X=\\overline Z=Y\\), while \\(Y\\) holds its value.\n- **\\(CK=0\\):** The right clocked inverter is enabled, giving \\(Y=\\overline X\\), while \\(X\\) holds its value.\n\nThus, at successive half-clock intervals, the states follow\n\\[\n(X,Y):\\quad 00\\rightarrow01\\rightarrow11\\rightarrow10\\rightarrow00.\n\\]\nEach output’s period is \\(2T_{CK}\\), and corresponding edges are displaced by \\(T_{CK}/2\\). Therefore,\n\\[\n|\\Delta\\phi|=360^\\circ\\frac{T_{CK}/2}{2T_{CK}}=90^\\circ.\n\\]\n\nSince \\(Z=\\overline Y\\), **\\(Y\\) and \\(Z\\) are complementary, not quadrature**. \\(X\\) and \\(Z\\) also form a quadrature pair, with the opposite phase sense. Clock-duty-cycle error and unequal propagation delays introduce quadrature error.",
        "format": "markdown",
        "sha256": "99798c6b80d6fdd95f52b558e2a7c6e8b7474198d11a2f9d1cc9f5fc0f92db19"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature and the half-period edge spacing. It notes generic delay-related error, but does not explain the two specific departures: Inv3 delay skewing Z and unequal loading of the latch outputs.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 2797,
        "total_tokens": 4845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2524,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 2797,
        "total_tokens": 4845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2524,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—ideally, with a 50%-duty-cycle clock.** The circuit is a divide-by-2 that provides quadrature signals at \\(X\\) and \\(Z\\).\n\n- **\\(CK=1\\):** The left clocked inverter is enabled, giving \\(X=\\overline Z\\), while the right stage holds its value.\n- **\\(CK=0\\):** The right stage is enabled, giving \\(Y=\\overline X\\), and therefore \\(Z=X\\), while the left stage holds its value.\n\nThus, \\(X\\) toggles on rising clock edges, and \\(Z\\) follows on falling edges. Both have period \\(2T_{CK}\\), and corresponding transitions are separated by \\(T_{CK}/2\\):\n\n\\[\n\\Delta\\phi=360^\\circ\\frac{T_{CK}/2}{2T_{CK}}=90^\\circ.\n\\]\n\nSo **\\(Z\\) lags \\(X\\) by \\(90^\\circ\\)** at \\(f_{CK}/2\\). Since \\(Y=\\overline Z\\), \\(X\\) and \\(Y\\) also form a quadrature pair, with the opposite lead/lag relationship.\n\nClock-duty-cycle error and unequal propagation delays cause deviations from exact quadrature.",
        "format": "markdown",
        "sha256": "f4a8752154dc25b6625f9e1b7a52f94af8b72561c1341e373cb878649df6c355"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature and derives the 90° separation. It notes deviations from exact quadrature, but does not explain the specific Inv3 delay skew or unequal latch loading required for full credit.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 2533,
        "total_tokens": 4581,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2260,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 2533,
        "total_tokens": 4581,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2260,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—ideally, with a 50% duty-cycle clock, it provides quadrature outputs at \\(f_{CK}/2\\).**\n\n- When \\(CK=1\\), the left clocked inverter is enabled: \\(X=\\overline Z\\).\n- When \\(CK=0\\), the right clocked inverter is enabled: \\(Y=\\overline X\\), so \\(Z=\\overline Y=X\\).\n\nThus, feedback makes \\(X\\) toggle at each rising clock edge, while \\(Y\\) and \\(Z\\) toggle at each falling edge. The output period is \\(2T_{CK}\\), and the separation between corresponding transitions of \\(X\\) and \\(Z\\) is \\(T_{CK}/2\\):\n\\[\n\\Delta\\phi=360^\\circ\\frac{T_{CK}/2}{2T_{CK}}=90^\\circ.\n\\]\n\nTherefore:\n- **\\(Z\\) lags \\(X\\) by \\(90^\\circ\\).**\n- **\\(Y\\) leads \\(X\\) by \\(90^\\circ\\).**\n- \\(Y\\) and \\(Z\\) are complementary, \\(180^\\circ\\) apart.\n\nClock duty-cycle error and unequal propagation delays cause departures from exact quadrature.",
        "format": "markdown",
        "sha256": "8e66f8aab0b9ee9f197211557d2130e2ef5175daa51bb7fdcc052b525a4a27de"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature and the half-period transition spacing. It notes timing-related departures, but does not specifically explain both the Inv3 delay skewing Z and the unequal loading of the two latches.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 2571,
        "total_tokens": 4619,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 2571,
        "total_tokens": 4619,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**With ideal, strong clock signals, increasing the widths generally improves the intrinsic speed**, but with diminishing returns.\n\nThe clocked transistors are series switches in the pull-up and pull-down paths. Widening them reduces their on-resistance,\n\\[\nR_{\\text{on}}\\propto \\frac{1}{W},\n\\]\nso the clocked inverters can charge and discharge their outputs faster. Eventually, the unclocked transistors become the limiting resistance.\n\nHowever, wider devices also increase:\n- **Clock-input capacitance**, slowing the clock edges if the clock driver has finite strength.\n- **Internal diffusion capacitance**, increasing the charge that must be moved.\n\nThus, in a practical implementation there is a sizing trade-off: widening undersized clock devices helps, while excessive widening can degrade the maximum operating frequency. It is not an unconditional “wider is faster.”",
        "format": "markdown",
        "sha256": "bac2902e8d229c99421cbe984fafa25a0858461999425606a29a374d3da7d20c"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly says widening reduces on-resistance and improves speed, but omits the key charge-sharing effect and its acceptable swing degradation; its added-capacitance tradeoff is not the main mechanism.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4260,
        "output_tokens": 12794,
        "total_tokens": 17054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12428,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 6397,
        "total_tokens": 8527,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**With a fixed, sufficiently strong clock drive, increasing their widths generally improves speed—but with diminishing returns.**\n\nThe clocked transistors are series switches in the pull-up and pull-down paths. Increasing their width lowers their on-resistance,\n\\[\nR_{\\text{on}}\\propto \\frac{1}{W},\n\\]\nallowing the storage nodes to charge and discharge faster. Their added diffusion capacitance is mainly at the internal stack nodes, rather than directly at the signal outputs.\n\nHowever, wider devices also have larger gate capacitance, so they load \\(CK\\) and \\(\\overline{CK}\\) more heavily. With a finite-strength clock driver, this slows the clock edges and can eventually outweigh the resistance improvement.\n\nThus, **upsizing helps when the clocked devices’ resistance is the bottleneck; it is not an unconditional improvement when the clock-driver loading is included.**",
        "format": "markdown",
        "sha256": "23f4e343cc482cce37cb54d5a8e28430e075dd281faf39fa589a4189c9b5c077"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly says widening improves speed by reducing on-resistance and adds little output loading. It omits charge sharing, the swing degradation identified in the golden solution, so it does not earn full credit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4254,
        "input_tokens": 4260,
        "output_tokens": 7624,
        "total_tokens": 11884,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7248,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 3812,
        "total_tokens": 5942,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**With a stiff, fast clock, widening the clocked transistors generally improves speed—but with diminishing returns.** They are series switches in the pull-up and pull-down paths, so reducing their on-resistance (\\(R_{\\text{on}}\\propto 1/W\\)) allows the signal nodes to charge and discharge faster.\n\nHowever, widening also increases:\n- **Gate capacitance**, loading the clock driver and potentially slowing its edges.\n- **Diffusion capacitance** at the internal stack nodes, limiting the delay improvement.\n\nThus, **intrinsic latch speed usually improves, but overall circuit speed need not**. With a finite-strength clock driver, excessive widening can degrade performance, so the devices should be optimized rather than simply made as wide as possible.",
        "format": "markdown",
        "sha256": "ae83d5390cc2a30a9a14510542704558a2bb0ec06b7ab27171ed3e9d72eb685d"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly says widening lowers on-resistance and generally improves speed, but omits the key charge-sharing swing degradation that is acceptable up to a point. Its clock-loading caveat does not replace that point.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4254,
        "input_tokens": 4260,
        "output_tokens": 12746,
        "total_tokens": 17006,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12428,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 6373,
        "total_tokens": 8503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit acts as a **dynamic divide-by-2 frequency divider**, assuming each switch closes when its controlling clock is high and disconnected inverter inputs retain charge on their capacitances.\n\nLet \\(Q\\) be the rightmost inverter’s output and \\(X\\) the output of \\(\\mathrm{Inv}_1\\). The two rightmost inverters together form a noninverting buffer.\n\n### Operation\n\n| Clock phase | Switch states | Circuit action |\n|---|---|---|\n| \\(CK=1\\) | Left closed; middle open | \\(\\mathrm{Inv}_1\\) receives \\(Q\\), so \\(X=\\overline Q\\). The right-hand section retains its previous output. |\n| \\(CK=0\\) | Left open; middle closed | The first inverter’s input retains the old \\(Q\\), keeping \\(X\\) stable. The two rightmost inverters transfer \\(X\\) to \\(Q\\). |\n\nConsequently, after each falling clock edge,\n\\[\nQ_{\\text{new}}=X=\\overline{Q_{\\text{old}}}.\n\\]\nThe left switch is then open, so the changed output cannot propagate around the loop again during that phase.\n\nThus the output sequence is\n\\[\n0,\\;1,\\;0,\\;1,\\ldots\n\\]\nat successive falling edges, giving\n\\[\n\\boxed{f_Q=\\frac{f_{CK}}{2}}.\n\\]\n\nIt is therefore equivalent to a **negative-edge-triggered toggle flip-flop** with toggling permanently enabled—not a free-running three-inverter ring oscillator.\n\nThe output of \\(\\mathrm{Inv}_1\\) also has frequency \\(f_{CK}/2\\), but changes after rising clock edges. With a 50%-duty-cycle clock and negligible delays, it leads \\(Q\\) by \\(90^\\circ\\) at the divided frequency.\n\n### Practical qualifications\n- Storage is **dynamic**: leakage limits how long either clock phase may last.\n- Clock phases should avoid overlapping conduction; otherwise, the switches momentarily complete an odd-inverter feedback loop, allowing races or oscillation.\n- Without a reset, the initial output polarity is unspecified.",
        "format": "markdown",
        "sha256": "65b8d12173624f2c1b71a2de0fdbed95befc1a348be5a13ef15a3c483e42ad77"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic-latch divide-by-two with output frequency half the clock frequency, satisfying the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 4468,
        "total_tokens": 5758,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4010,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 4468,
        "total_tokens": 5758,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4010,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The arrangement is a **dynamic divide-by-2 circuit**, equivalent to a toggle flip-flop.\n\nLet \\(X\\) be the output of \\(\\mathrm{Inv}_1\\), and \\(Q\\) the output of the rightmost inverter. Assume each switch closes when its control is high, and disconnected inverter inputs retain their voltage on their input capacitance.\n\n### Operation\n\n| Clock phase | Switch states | Circuit action |\n|---|---|---|\n| \\(CK=1\\) | Left closed; middle open | \\(\\mathrm{Inv}_1\\) receives \\(Q\\), so \\(X=\\overline Q\\). The second inverter’s input holds its previous value, keeping \\(Q\\) unchanged. |\n| \\(CK=0\\) | Left open; middle closed | The input of \\(\\mathrm{Inv}_1\\) holds the old \\(Q\\), so \\(X=\\overline{Q_{\\text{old}}}\\). The last two inverters pass \\(X\\) without net inversion, producing \\(Q_{\\text{new}}=\\overline{Q_{\\text{old}}}\\). |\n\nThus, after each falling edge of \\(CK\\),\n\\[\nQ_{n+1}=\\overline{Q_n}.\n\\]\n\nFor example, successive falling edges give\n\\[\nQ:\\quad 0\\rightarrow1\\rightarrow0\\rightarrow1\\rightarrow\\cdots\n\\]\n\nTwo clock periods are needed for a complete output cycle, so\n\\[\n\\boxed{f_Q=\\frac{f_{CK}}{2}}.\n\\]\n\nThe rightmost output toggles after falling clock edges; \\(X\\) toggles after rising clock edges.\n\n### Practical considerations\n\n- **Dynamic storage:** State retention depends on input capacitance, so leakage prevents indefinite operation with the clock stopped.\n- **Clock overlap:** Preferably the switches use non-overlapping clocks. If both close simultaneously, the loop becomes a three-inverter ring, permitting races or oscillation.\n- **Timing:** Each clock phase must allow the corresponding inverter path to settle.\n- **Initialization:** With no reset shown, the initial output state is unspecified.",
        "format": "markdown",
        "sha256": "702257acfb911271aa379abb2d934c7f6bce3c30c1be7395551de45974fe20d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic divide-by-two circuit and explains that its output toggles once per clock period, producing half the clock frequency. The dynamic-storage discussion is consistent with the essential operation.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 3035,
        "total_tokens": 4325,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 3035,
        "total_tokens": 4325,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **dynamic divide-by-2 circuit**, equivalent to a toggle flip-flop.\n\nAssume each switch closes when its control signal is high, and the inverter-input capacitances retain their voltages while disconnected. Let \\(Q\\) be the output of the rightmost inverter.\n\n### Clock-phase operation\n\n| Clock | Switch states | Operation |\n|---|---|---|\n| \\(CK=1\\) | First closed; second open | The first inverter receives \\(Q\\), so its output becomes \\(\\overline Q\\). The remaining stages hold their previous state. |\n| \\(CK=0\\) | First open; second closed | The first inverter retains its sampled input. Its output passes through the last two inverters, which together are noninverting, giving \\(Q_{\\text{new}}=\\overline{Q_{\\text{old}}}\\). |\n\nThus, on every **falling edge** of the clock, after propagation delay,\n\\[\nQ_{n+1}=\\overline{Q_n}.\n\\]\nThe output sequence is therefore\n\\[\n0,\\;1,\\;0,\\;1,\\ldots\n\\]\nat successive falling edges. Two clock periods are required for one output period:\n\\[\n\\boxed{f_Q=\\frac{f_{CK}}{2}}.\n\\]\n\n### Important observations\n- Although it resembles a three-inverter ring oscillator, it is **not free-running**: the complementary switches keep the feedback loop broken.\n- Storage is **dynamic**, relying on capacitance, so leakage limits how slowly it can be clocked.\n- The switches should not be on simultaneously; overlap can briefly complete the odd-inversion loop and cause race-through or oscillation.\n- There is no reset, so the initial output state is unspecified.",
        "format": "markdown",
        "sha256": "8bf7a6db6c1b7e5cfd8347dcad672e8ee55c1a18c667e5f75dffc479206a478a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic divide-by-two (toggle) circuit and explains its half-frequency output. The additional phase and initialization details are secondary and do not contradict the essential answer.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 2961,
        "total_tokens": 4251,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 2961,
        "total_tokens": 4251,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is an **unclocked bypass around the first switch and black inverter**. Its effect is not simply to add another inverter delay.\n\nLet \\(Q\\) be the rightmost output and \\(X\\) the shared output of the red and first black inverters:\n\n- **\\(CK=1\\):** Both inverters drive \\(X=\\overline Q\\). The red inverter can help \\(X\\) settle faster, but also adds capacitive loading.\n- **\\(CK=0\\):** The first black inverter holds its previous state, while the two rightmost inverters transfer \\(X\\) to \\(Q\\). After \\(Q\\) changes, the red inverter tries to reverse \\(X\\), **fighting the first black inverter**. Opening that inverter’s input switch does not disconnect its output.\n\nFurthermore, with the \\(\\overline{CK}\\) switch closed, the red inverter and the two rightmost inverters form an odd-inversion feedback loop. If the red inverter is sufficiently strong, this can cause racing or oscillation rather than one clean output transition.\n\nThus, for the usual dynamic divide-by-two operation, the red inverter can introduce **contention current, reduced noise margins, and incorrect division**. A deliberately sized weak inverter might assist high-speed switching, but whether it improves performance depends on transistor strengths, delays, and clock timing—not the topology alone.",
        "format": "markdown",
        "sha256": "9a1d6511f10835e51ebd399f4d3e6882bce2b94d328b5bda9d74bace1b629416"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the unclocked feedforward bypass, its potential to speed transitions, and the contention/odd-inversion loop that can corrupt division. It does not make the key low-frequency connection: the branch can dominate when the half-cycle is long, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 5988,
        "total_tokens": 7147,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 5988,
        "total_tokens": 7147,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is an **unclocked bypass around the first switch and \\(Inv_1\\)**. It can assist high-speed operation, but it also introduces a race-around risk.\n\nLet \\(Q\\) be the feedback node at the left and \\(X\\) the output of \\(Inv_1\\). The red inverter continuously tries to drive \\(X=\\overline Q\\).\n\n- **When \\(CK=1\\):** The first switch is closed, so \\(Inv_1\\) and the red inverter drive \\(X\\) in the same direction. The red path provides additional drive without the first switch’s delay, potentially improving speed.\n- **When \\(\\overline{CK}=1\\):** The first switch is open, so \\(Inv_1\\) retains the previously sampled state. The second switch lets that state propagate through the last two inverters, changing \\(Q\\). The red inverter then tries to reverse \\(X\\), **opposing \\(Inv_1\\)**. It also completes a three-inverter feedback loop, which can produce extra transitions or oscillation if the red inverter is sufficiently strong.\n\nThus, the trade-off is **possible speed improvement versus increased loading, contention power, and reduced robustness**. In particular, a long clock phase can allow unwanted repeated transitions, corrupting divide-by-two operation.\n\nIt is **not a conventional keeper inverter**. Whether it helps depends on its strength relative to \\(Inv_1\\), the propagation delays, and the clock frequency.",
        "format": "markdown",
        "sha256": "0eafd65c83244f22d1c612effd961e07a9e7bcab246febd7ba7e2378905550ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the unclocked feedforward bypass and its speed benefit, as well as the low-frequency race-around that can corrupt division during a long clock phase. The mechanism and trade-off match the golden solution.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 6528,
        "total_tokens": 7687,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 6528,
        "total_tokens": 7687,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter **bypasses the \\(CK\\)-controlled switch**, so it changes the circuit’s behavior—not just its delay.\n\nLet \\(Q\\) be the rightmost output and \\(X\\) the node before the \\(\\overline{CK}\\) switch. Without the red inverter, the circuit is a dynamic divide-by-2.\n\n- **When \\(CK=1\\):** The first black inverter and the red inverter both drive \\(X=\\overline Q\\). They agree, so the red inverter can assist the drive, although it adds capacitance.\n- **When \\(CK=0\\):** The first black inverter should retain its previous output. The \\(\\overline{CK}\\) switch closes, and the two following inverters make \\(Q\\) follow \\(X\\). But the red inverter then tries to drive \\(X=\\overline Q\\), **opposing the stored value**.\n\nIn this second phase, the red inverter creates the loop\n\\[\nQ\\rightarrow\\text{red inverter}\\rightarrow X\n\\rightarrow\\text{two black inverters}\\rightarrow Q,\n\\]\nwhich contains **three inversions**. This is an oscillatory negative-feedback loop, not a state-retaining feedback loop.\n\nConsequently:\n\n- A sufficiently strong red inverter can cause oscillation or incorrect division.\n- A weak one may allow correct division, but introduces contention current and reduces noise margins.\n- Any improvement in transition speed depends on sizing and loading; it is not guaranteed.\n\nThus, **as drawn, it compromises the divider’s robustness and generally increases power**, rather than acting as a useful keeper.",
        "format": "markdown",
        "sha256": "592025357f65070a87240b8c43dcfdd43d935b5757e4c2e88391f63dfad66d85"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the bypass and the three-inversion loop, but misses the key speed benefit and the low-frequency consequence: the unclocked branch can overpower the main path and raise the minimum usable clock frequency. Its sizing-contingent, generally harmful conclusion does not capture that tradeoff.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 4998,
        "total_tokens": 6157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 4998,
        "total_tokens": 6157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not with the connections shown.** The red inverter is an **unclocked bypass around the \\(CK\\) switch and \\(\\mathrm{Inv}_1\\)**, not a keeper.\n\nLabel the nodes:\n- \\(A\\): the left/bottom feedback node;\n- \\(B\\): the input of \\(\\mathrm{Inv}_1\\), just after the \\(CK\\) switch;\n- \\(C\\): the output of \\(\\mathrm{Inv}_1\\).\n\nThe two inverters drive:\n\\[\n\\mathrm{Inv}_1:\\quad C\\leftarrow\\overline B,\n\\qquad\n\\text{red}:\\quad C\\leftarrow\\overline A.\n\\]\nThey both drive **the same output node**. A cross-coupled keeper would instead take \\(C\\) as its input and drive \\(B\\).\n\n### What the red inverter actually does\n\n- **With the \\(CK\\) switch closed**, \\(A=B\\), so the red inverter and \\(\\mathrm{Inv}_1\\) are effectively parallel drivers.\n- **With the \\(\\overline{CK}\\) switch closed**, the two right-hand inverters provide a noninverting path from \\(C\\) back to \\(A\\). Together with the red inverter, that makes a **three-inverter, odd-inversion feedback loop**—a ring-oscillator-type path, not a bistable latch.\n\nBecause \\(\\mathrm{Inv}_1\\) is still driving \\(C\\), one cannot simply conclude that it will oscillate: the actual behavior depends on drive strengths and delays. It can involve contention, degraded logic levels, or oscillation. In particular, after the feedback node changes, the red inverter tries to drive \\(C\\) opposite to the value retained by \\(\\mathrm{Inv}_1\\).\n\n**It does not eliminate the leakage-related minimum clock frequency.** The input of \\(\\mathrm{Inv}_1\\) still floats when its switch is open, and the input of the next inverter floats during the opposite phase. Proper static retention would require correctly connected keepers or latch feedback at those storage nodes.",
        "format": "markdown",
        "sha256": "835bbd9757e67f84a8091452c7a623cf130f6851bf44e16dc30670454ecdd936"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter as an unclocked feedforward bypass, with the three-inversion loop and contention described. It misses the key rate-dependent tradeoff: the bypass can help at high rates but overpower the intended latch at low rates, raising the minimum usable clock frequency; instead it attributes the remaining limit to leakage.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 4581,
        "total_tokens": 5785,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4133,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 4581,
        "total_tokens": 5785,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4133,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not with the connections shown.** The red inverter is an **unclocked bypass around the first switch and `Inv1`**, not a cross-coupled keeper.\n\nLet:\n- \\(Q\\) be the final output, fed back along the bottom wire;\n- \\(X\\) be the input of `Inv1`;\n- \\(Y\\) be the output of `Inv1`.\n\n`Inv1` drives \\(Y=\\neg X\\), while the red inverter drives \\(Y=\\neg Q\\). **Their outputs are connected together**; neither inverter feeds the other’s input.\n\n### What it actually does\n\n- **First switch closed, second switch open:** \\(X=Q\\), so both inverters drive the same value onto \\(Y\\). The red inverter provides a parallel drive path.\n- **First switch open, second switch closed:** `Inv1` holds \\(Y\\) according to the sampled value at \\(X\\). The two right-hand inverters transfer \\(Y\\) to \\(Q\\) without inversion. Once \\(Q\\) changes, the red inverter therefore tries to drive \\(Y=\\neg Q\\), **opposing `Inv1`**.\n\nIn that second phase, the red inverter and the two right-hand inverters also form an **odd-inversion feedback loop**, not a bistable latch. If the red inverter is weak, `Inv1` may dominate, at the cost of contention current. If it is sufficiently strong, it can corrupt operation or permit oscillation.\n\nThus its actual topological role is a **bypass/feedback drive path**. A particular ratioed design might exploit it for timing assistance, but it is not a leakage keeper.\n\n### Why the minimum-frequency claim is wrong\n\nThe input of `Inv1` still floats when the first switch is open, and the input of the next inverter still floats when the second switch is open. The red inverter provides no restorative feedback to either isolated storage node.\n\nA keeper paired with `Inv1` would instead run **from `Inv1`’s output back to `Inv1`’s input, on the inverter side of the switch**, with suitably weak or clock-controlled drive. The other dynamic storage node would also need retention to make the whole divider static.",
        "format": "markdown",
        "sha256": "56fb6c9ba7019663dc0df587da5dc04e8d79cea9b45ff0361c75da2426f7250e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the unclocked feedforward bypass, contention, and odd-inversion loop. It only hints at the timing tradeoff, though, and misses that the branch can overpower the dynamic latch at low clock rates and raise the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 6166,
        "total_tokens": 7370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 6166,
        "total_tokens": 7370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not for the circuit as drawn.** The red inverter does not form a cross-coupled pair with `Inv1`.\n\nLet:\n- \\(Q\\) be the bottom return wire,\n- \\(X\\) be the input of `Inv1`, **after** the \\(CK\\) switch,\n- \\(Y\\) be the output of `Inv1`.\n\nThe red inverter takes **\\(Q\\) as its input and drives \\(Y\\)**. It therefore provides an **unclocked bypass** around the first switch and `Inv1`, rather than feeding `Inv1`’s output back to its storage input.\n\nIts effects are:\n\n- **When the \\(CK\\) switch is closed:** \\(X=Q\\), so the red inverter and `Inv1` act in parallel, driving the same node.\n- **When the \\(\\overline{CK}\\) switch is closed:** \\(Y\\) drives \\(Q\\) through the two right-hand inverters—a noninverting path. The red inverter consequently closes a **three-inverter, negative-feedback loop**. After the intended divider transition, it tries to drive \\(Y\\) opposite to the value being held by `Inv1`. Depending on drive strengths and delays, this can produce contention, degraded logic levels, or oscillation. It is not a storage latch.\n\nA genuine keeper for `Inv1` would instead be connected as\n\n\\[\nY \\;\\longrightarrow\\; \\text{weak inverter} \\;\\longrightarrow\\; X,\n\\]\n\nwith \\(X\\) on the isolated side of the first switch. That would form a two-inverter positive-feedback loop.\n\nThus, the red inverter **cannot be credited with removing the leakage-related minimum clock frequency**. If a keeper was intended, it is misconnected; making the whole divider static would also require retaining the other dynamic storage node.",
        "format": "markdown",
        "sha256": "c48e207d44c946d6db52324c69a13a7e3354017fc0240f371d788c64de2b14f1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter as an unclocked feedforward bypass, including the three-inverter loop. It omits the key frequency-dependent tradeoff: the branch can help at high clock rates but overpower the intended latch behavior at low rates, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 6454,
        "total_tokens": 7658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6063,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 6454,
        "total_tokens": 7658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6063,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming a \\(50\\,\\Omega\\) source and that \\(C_1\\) is effectively a short at the signal frequency, **co-design the inverter transconductance and \\(R_F\\)**—do not increase transistor \\(g_m\\) while leaving the feedback resistor unchanged.\n\n### 1. Enforce the input-match constraint\n\nLet\n\\[\nG_m=g_{m1}+g_{m2},\\qquad r_o=r_{o1}\\parallel r_{o2}.\n\\]\nNeglecting transistor capacitances, the input resistance is\n\\[\nR_{\\mathrm{in}}=\\frac{R_F+r_o}{1+G_mr_o}.\n\\]\nConsequently, maintaining \\(R_{\\mathrm{in}}=R_S=50\\,\\Omega\\) requires\n\\[\n\\boxed{R_F=R_S(1+G_mr_o)-r_o.}\n\\]\nThe commonly used approximation \\(R_F\\approx R_S(1+G_mr_o)\\) is valid only when \\(R_F\\gg r_o\\).\n\n### 2. Reduce both transistor and feedback-resistor noise\n\nWrite the combined channel-noise current density as\n\\[\nS_{i,\\mathrm{MOS}}\n=4kT\\left(\\gamma_1g_{m1}+\\gamma_2g_{m2}\\right)\n=4kT\\gamma_{\\mathrm{eff}}G_m.\n\\]\n\nIn the favorable regime \\(G_mR_S\\gg1\\) and \\(R_F\\gg R_S\\), the noise factor is approximately\n\\[\n\\boxed{F\\approx\n1+\\frac{\\gamma_{\\mathrm{eff}}}{G_mR_S}\n+\\frac{R_S}{R_F}},\n\\qquad NF=10\\log_{10}F.\n\\]\n\nThis suggests the following optimization:\n\n- **Increase \\(G_m=g_{m1}+g_{m2}\\)** to lower the input-referred transistor noise. Both devices contribute useful transconductance while sharing the same DC current.\n- **Increase \\(R_F\\) consistently with the matching equation** to reduce the feedback resistor’s noise contribution.\n- Recalculate \\(r_o\\) after changing device dimensions or bias. Increasing current does not necessarily increase \\(G_mr_o\\), so \\(R_F\\) cannot always be increased proportionally.\n- Stop when power, input capacitance, bandwidth, gain, or stability becomes limiting.\n\n### Important limiting case\n\nIf \\(r_o\\gg R_F\\) and \\(G_mr_o\\gg1\\), then\n\\[\nR_{\\mathrm{in}}\\approx\\frac{1}{G_m}.\n\\]\nIn this approximation, matching fixes\n\\[\nG_m\\approx\\frac{1}{50\\,\\Omega}=20\\,\\mathrm{mS}.\n\\]\nYou therefore **cannot improve NF by arbitrarily increasing \\(G_m\\)** while retaining both this approximation and the match. Increasing \\(R_F\\) reduces its noise, but the channel-noise floor approaches\n\\[\nF\\approx1+\\gamma_{\\mathrm{eff}}.\n\\]\n\nThus, the general strategy is **high useful transconductance and sufficient inverter gain, with \\(R_F\\) readjusted to preserve \\(50\\,\\Omega\\)**. The input-resistance constraint alone does not determine a unique optimum; practical power and frequency constraints are also needed.",
        "format": "markdown",
        "sha256": "ea5ce8f8460866fa123b30f27afa0f62ef20100821fb571ea8e7b5254b766769"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the finite-output-resistance input-match relation and recommends increasing gm while readjusting RF to preserve 50 Ω; its noise expression shows the resulting reduction in channel-noise contribution. The 1/gm result is correctly presented as a limiting case, not the general optimization.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 12782,
        "total_tokens": 15249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12077,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 12782,
        "total_tokens": 15249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12077,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **shunt-feedback CMOS-inverter amplifier**. To reduce its noise figure while preserving a \\(50\\,\\Omega\\) input, the transistor transconductances and the feedback resistor must be optimized **together**.\n\nAssume a \\(50\\,\\Omega\\) source, \\(C_1\\) is an RF short, and transistor capacitances can initially be neglected. Define\n\\[\nG_m=g_{m1}+g_{m2},\\qquad r_o=r_{o1}\\parallel r_{o2}.\n\\]\n\n### 1. Enforce the input-match constraint\n\nThe small-signal input resistance is\n\\[\nR_{\\mathrm{in}}=\\frac{R_F+r_o}{1+G_mr_o}.\n\\]\nTherefore, the required feedback resistance is\n\\[\n\\boxed{R_F=50(1+G_mr_o)-r_o.}\n\\]\n\nEquivalently, \\(R_F=50(1+|A_v|)\\), where \\(A_v\\) is the **actual loaded, inverting gain** from the gates to the drains. Thus, \\(R_F\\) should generally be much larger than \\(50\\,\\Omega\\); it is not a \\(50\\,\\Omega\\) termination.\n\n### 2. Reduce both noise contributions\n\nUsing transistor channel-noise densities \\(4kT\\gamma_i g_{mi}\\), define\n\\[\n\\bar\\gamma=\\frac{\\gamma_1g_{m1}+\\gamma_2g_{m2}}{G_m}.\n\\]\nFor \\(R_F\\gg R_S\\) and \\(G_mR_F\\gg1\\), the noise factor is approximately\n\\[\n\\boxed{\nF\\simeq1+\n\\underbrace{\\frac{\\bar\\gamma}{G_mR_S}}_{\\text{transistor noise}}\n+\n\\underbrace{\\frac{R_S}{R_F}\n\\left(1+\\frac{1}{G_mR_S}\\right)^2}_{\\text{feedback-resistor noise}},\n\\qquad R_S=50\\,\\Omega .\n}\n\\]\nThe noise figure is \\(NF=10\\log_{10}F\\).\n\nThis gives the design directions:\n\n- **Increase \\(G_m=g_{m1}+g_{m2}\\)** to reduce input-referred transistor noise. Both transistors contribute useful transconductance while sharing the same DC current.\n- **Use a large \\(R_F\\)** to reduce feedback-resistor noise, choosing its value from the matching equation above.\n- **Maintain sufficient intrinsic gain \\(G_mr_o\\)** so that a large \\(R_F\\) is compatible with the input match.\n- Optimize device sizes and bias for high transconductance efficiency, but check gate resistance, input capacitance, bandwidth, and stability. Increasing bias current alone is not guaranteed to help, because it also changes \\(r_o\\).\n\n### Important limiting case\n\nIf \\(r_o\\gg R_F\\) and \\(G_mr_o\\gg1\\), then\n\\[\nR_{\\mathrm{in}}\\approx\\frac{1}{G_m}.\n\\]\nIn that approximation, the match fixes \\(G_m\\approx20\\,\\mathrm{mS}\\), so **you cannot simply increase \\(G_m\\)** while retaining \\(50\\,\\Omega\\). Increasing \\(R_F\\) reduces its noise contribution, and the idealized noise factor approaches \\(1+\\bar\\gamma\\). To improve beyond that particular limit, use the full matching relation and increase \\(G_m\\) and \\(R_F\\) together.\n\n**Bottom line:** seek high total transconductance and a large feedback resistor, while enforcing the boxed input-match equation. A unique optimum requires additional power, bandwidth, gain, and transistor-model constraints.",
        "format": "markdown",
        "sha256": "805598ac527f7d5cab93ed465148f6ba3c2697f389ee67ed011a242f8cec9282"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the finite-output-resistance match relation and explains that increasing gm while adjusting RF preserves 50 Ω and can reduce NF below the 1+γ limit. Its high-ro limit is clearly identified as a limiting approximation, consistent with the golden solution.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 11144,
        "total_tokens": 13611,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 11144,
        "total_tokens": 13611,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The key is to optimize the noise **subject to the input-matching constraint**. \\(R_F\\) and the transistor transconductances cannot be chosen independently.\n\nAssume \\(C_1\\) is an AC short in the operating band, and define\n\\[\nG_m=g_{m1}+g_{m2},\\qquad R_o=r_{o1}\\parallel r_{o2}.\n\\]\nBoth devices contribute to the inverter’s signal transconductance.\n\n### 1. Impose the 50-\\(\\Omega\\) match\nNeglecting device capacitances,\n\\[\nR_{\\mathrm{in}}=\\frac{R_F+R_o}{1+G_mR_o}.\n\\]\nThus the required matching condition is\n\\[\n\\boxed{R_F=50(1+G_mR_o)-R_o.}\n\\]\nUse this equation whenever transistor sizing or bias is changed; remember that those changes can affect both \\(G_m\\) and \\(R_o\\).\n\n### 2. Reduce the two main noise contributions\nThe MOS channel-noise current density is approximately\n\\[\nS_{i,n}=4kT\\Gamma,\\qquad\n\\Gamma=\\gamma_1g_{m1}+\\gamma_2g_{m2}.\n\\]\n\nFor a source resistance \\(R_S=50\\,\\Omega\\), the midband thermal-noise factor, neglecting other noise sources, is\n\\[\nF=1+\n\\frac{\\Gamma(R_F+R_S)^2+R_F(1+G_mR_S)^2}\n     {R_S(G_mR_F-1)^2}.\n\\]\nWhen \\(R_F\\gg R_S\\) and \\(G_mR_S\\gg1\\), this simplifies to\n\\[\nF\\approx1+\n\\underbrace{\\frac{\\Gamma}{G_m^2R_S}}_{\\text{MOS noise}}\n+\\underbrace{\\frac{R_S}{R_F}}_{\\text{feedback-resistor noise}}.\n\\]\n\nTherefore, the practical design direction is:\n\n- **Increase total transconductance \\(G_m\\)** efficiently, using both devices.\n- **Use a large \\(R_F\\)** to reduce its input-referred noise contribution.\n- **Readjust the gain/bias/sizing to preserve the matching equation.** For roughly fixed \\(R_o\\), increasing \\(G_m\\) requires increasing \\(R_F\\).\n\n### Important limiting case\nIf you approximate \\(R_o\\gg R_F\\), then\n\\[\nR_{\\mathrm{in}}\\approx\\frac1{G_m},\n\\qquad\nG_m\\approx20\\,\\mathrm{mS}.\n\\]\nIn that approximation, **you cannot simply increase \\(G_m\\) while retaining the match**. Increasing \\(R_F\\) removes the resistor-noise penalty, but leaves the channel-noise limit\n\\[\nF\\rightarrow1+\\gamma_{\\mathrm{eff}},\\qquad\n\\gamma_{\\mathrm{eff}}=\\frac{\\Gamma}{G_m}.\n\\]\nFor the ideal long-channel value \\(\\gamma_{\\mathrm{eff}}=2/3\\), this corresponds to \\(NF\\approx2.2\\,\\mathrm{dB}\\). This is a limit of that high-\\(R_o\\) approximation, not a universal bound for the circuit.\n\n**Bottom line:** seek larger \\(R_F\\) and lower input-referred MOS noise while enforcing the exact 50-\\(\\Omega\\) constraint. The numerical optimum requires power, bandwidth, capacitance, and device-model constraints.",
        "format": "markdown",
        "sha256": "c4a7b0b14c40148b1479027e9e23d1249b1df66b98f9fd1299bb47d16995f8d2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly uses the finite-output-resistance match relation, recommends increasing transconductance while raising RF to preserve Rin, and shows how the noise can fall below 1+gamma. The 1+gamma result is appropriately identified as a conditional high-Ro limit, not a universal bound.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 15087,
        "total_tokens": 17554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14347,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 15087,
        "total_tokens": 17554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14347,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume an ideal tail-current source \\(I_{SS}\\), neglect transistor output resistances, and take \\(V_{DD}\\) and \\(V_b\\) as ac grounds.\n\nThe \\(M_2\\)–\\(M_3\\) pair has an effective transconductance\n\\[\nG_m=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}},\n\\]\nwhich equals \\(g_m/2\\) for matched devices.\n\nWriting \\(v_i=v_P\\), the first stage gives\n\\[\nv_x=-g_{m1}R_{D1}v_i.\n\\]\nAt the output,\n\\[\n\\frac{v_o}{R_{D2}}+\\frac{v_o-v_i}{R_F}=G_m v_x.\n\\]\nThe input current is\n\\[\ni_{\\rm in}=sC_{\\rm in}v_i+\\frac{v_i-v_o}{R_F}.\n\\]\nEliminating \\(v_o\\) and \\(v_x\\) yields\n\\[\n\\boxed{\nZ_{\\rm in}(s)=\n\\left[\nsC_{\\rm in}\n+\\frac{1+g_{m1}R_{D1}G_mR_{D2}}{R_F+R_{D2}}\n\\right]^{-1}\n}.\n\\]\n\nEquivalently,\n\\[\n\\boxed{\nZ_{\\rm in}(s)=\\frac{R_{\\rm in}}{1+sR_{\\rm in}C_{\\rm in}},\n\\qquad\nR_{\\rm in}=\n\\frac{R_F+R_{D2}}\n{1+g_{m1}R_{D1}G_mR_{D2}}\n}.\n\\]\n\nFor matched \\(M_2,M_3\\), and with \\(R_F\\gg R_{D2}\\), the usual approximation is\n\\[\n\\boxed{\nR_{\\rm in}\\simeq\n\\frac{R_F}\n{1+\\frac12 g_{m1}g_mR_{D1}R_{D2}}\n}.\n\\]\nUse \\(s=j\\omega\\) for the sinusoidal input impedance.",
        "format": "markdown",
        "sha256": "1b5882d7973386718fac5f3cc31b750d1ce832490548a411e75540f6e2deb03a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact result with the essential numerator \\(R_F+R_{D2}\\) and an equivalent unloaded gain \\(g_{m1}R_{D1}G_mR_{D2}\\), which matches the golden expression for the matched pair. The added input-capacitance model does not alter the correct DC input resistance.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 6826,
        "total_tokens": 7036,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 6826,
        "total_tokens": 7036,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume ideal \\(I_{SS}\\), negligible transistor output conductances, and AC-grounded \\(V_{DD}\\) and \\(V_b\\).\n\nLet the input voltage be \\(v_p\\). The first stage gives\n\\[\nv_x=-g_{m1}R_{D1}v_p.\n\\]\n\nFor the source-coupled pair \\(M_2,M_3\\), the effective transconductance from \\(v_x\\) to the current delivered to the output is\n\\[\ng_{23}=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}.\n\\]\nThus, with \\(R_F\\) disconnected, the voltage gain is \\(-A_0\\), where\n\\[\nA_0=g_{m1}R_{D1}\\,g_{23}R_{D2},\n\\]\nand the output resistance is \\(R_{D2}\\).\n\nLet \\(i_F\\) flow from \\(P\\) through \\(R_F\\) toward the output. Then\n\\[\nv_{\\text{out}}=-A_0v_p+R_{D2}i_F,\n\\qquad\nv_p-v_{\\text{out}}=R_Fi_F.\n\\]\nCombining these,\n\\[\n(1+A_0)v_p=(R_F+R_{D2})i_F.\n\\]\n\nTherefore, the resistance looking into \\(P\\), **excluding \\(C_{\\text{in}}\\)**, is\n\\[\n\\boxed{\nR_{\\text{in}}=\n\\frac{R_F+R_{D2}}\n{1+g_{m1}R_{D1}R_{D2}\n\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}}\n}.\n\\]\n\nFor matched \\(M_2,M_3\\), with \\(g_{m2}=g_{m3}=g_m\\),\n\\[\n\\boxed{\nR_{\\text{in}}=\n\\frac{R_F+R_{D2}}\n{1+\\frac12g_{m1}g_mR_{D1}R_{D2}}\n}.\n\\]\n\nIncluding the shown input capacitor, the impedance seen by \\(I_{\\text{in}}\\) is\n\\[\n\\boxed{\nZ_{\\text{in}}(s)\n=R_{\\text{in}}\\parallel\\frac{1}{sC_{\\text{in}}}\n=\\frac{R_F+R_{D2}}\n{1+A_0+sC_{\\text{in}}(R_F+R_{D2})}\n}.\n\\]",
        "format": "markdown",
        "sha256": "8b3d07c8161a480eb496034a121532deaaa30df234447a50286dffbf857b2112"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact Miller-theorem result, including the output-side resistance: Rin = (RF + RD2)/(1 + A0). Its gain expression is equivalent to the golden result for matched M2 and M3, and the added input-capacitance impedance is consistent.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 6021,
        "total_tokens": 6231,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 6021,
        "total_tokens": 6231,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume small-signal operation, ideal \\(I_{SS}\\), and negligible MOS output conductances and body effect. Both \\(V_{DD}\\) and \\(V_b\\) are AC grounds.\n\nLet \\(v_i=v_P\\). The first stage gives\n\\[\nv_x=-g_{m1}R_{D1}v_i.\n\\]\n\nSince the total small-signal source current of \\(M_2,M_3\\) is zero, their effective transconductance from \\(v_x\\) to the output is\n\\[\nG_m=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}.\n\\]\nFor matched \\(M_2,M_3\\), this becomes \\(G_m=g_m/2\\).\n\nDefine the magnitude of the **unloaded forward voltage gain**\n\\[\nA_0=g_{m1}R_{D1}G_mR_{D2}.\n\\]\nThe output is then equivalent to a voltage source \\(-A_0v_i\\) in series with \\(R_{D2}\\). Consequently, the current entering the feedback path is\n\\[\ni_f=\\frac{v_i-(-A_0v_i)}{R_F+R_{D2}}.\n\\]\n\nThus the resistance labeled \\(R_{\\mathrm{in}}\\), excluding \\(C_{\\mathrm{in}}\\), is\n\\[\n\\boxed{\nR_{\\mathrm{in}}\n=\\frac{R_F+R_{D2}}\n{1+g_{m1}R_{D1}\n\\left(\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\right)R_{D2}}\n}.\n\\]\n\nFor matched \\(M_2,M_3\\),\n\\[\n\\boxed{\nR_{\\mathrm{in}}\n=\\frac{R_F+R_{D2}}\n{1+\\frac12 g_{m1}g_mR_{D1}R_{D2}}\n}.\n\\]\n\n**Including the shown input capacitance**, the impedance seen by \\(I_{\\mathrm{in}}\\) is\n\\[\n\\boxed{\nZ_{\\mathrm{in}}(s)\n=R_{\\mathrm{in}}\\parallel\\frac{1}{sC_{\\mathrm{in}}}\n=\\frac{R_{\\mathrm{in}}}{1+sR_{\\mathrm{in}}C_{\\mathrm{in}}}\n}.\n\\]\n\nIf \\(R_F\\gg R_{D2}\\), the familiar approximation is \\(R_{\\mathrm{in}}\\approx R_F/(1+A_0)\\).",
        "format": "markdown",
        "sha256": "071b363956eb4f39256d6d508269ec1a046660287828013a3e1452d013ab7b48"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the exact Miller-theorem result, including the output resistance in the feedback path, and gives the matching unloaded gain and input-capacitance impedance.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 3650,
        "total_tokens": 3860,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 3650,
        "total_tokens": 3860,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO noise is converted to phase noise through the VCO’s **supply-pushing sensitivity**.\n\nAssume \\(S_{\\rm th}(f_m)\\) is the **one-sided voltage-noise PSD at \\(V_{\\rm out}\\)**, in \\(\\mathrm{V^2/Hz}\\), where \\(f_m\\) is the offset from the carrier. Define\n\\[\nK_{\\rm DD}=\\left.\\frac{\\partial f_{\\rm osc}}{\\partial V_{\\rm out}}\\right|_{V_{\\rm cont}}\n\\qquad[\\mathrm{Hz/V}].\n\\]\n\n### Supply noise to phase noise\nFor small supply fluctuations, at offsets where the supply response is approximately quasi-static,\n\\[\n\\delta f(t)=K_{\\rm DD}v_{\\rm th}(t),\n\\qquad\n\\frac{d\\phi(t)}{dt}=2\\pi K_{\\rm DD}v_{\\rm th}(t).\n\\]\nThus the supply-to-phase transfer function is\n\\[\nH_{\\phi v}(j2\\pi f_m)=\\frac{2\\pi K_{\\rm DD}}{j2\\pi f_m},\n\\]\ngiving\n\\[\n\\boxed{\nS_{\\phi,\\rm LDO}(f_m)\n=\\left(\\frac{K_{\\rm DD}}{f_m}\\right)^2S_{\\rm th}(f_m)\n}\n\\quad[\\mathrm{rad^2/Hz}].\n\\]\n\nThe corresponding single-sideband phase noise is\n\\[\n\\boxed{\n\\mathcal L_{\\rm LDO}(f_m)\n=\\frac12\\left(\\frac{K_{\\rm DD}}{f_m}\\right)^2S_{\\rm th}(f_m)\n}\n\\]\nin linear units, or\n\\[\n\\mathcal L_{\\rm LDO,dBc/Hz}(f_m)\n=10\\log_{10}\\!\\left[\n\\frac{K_{\\rm DD}^2S_{\\rm th}(f_m)}{2f_m^2}\n\\right].\n\\]\nWhite LDO voltage noise therefore produces a \\(1/f_m^2\\) phase-noise contribution.\n\n### Which sensitivity applies to this circuit?\nAlthough the supply noise reaches \\(X\\) and \\(Y\\) primarily as common-mode noise, it changes the bias across both varactors and hence the oscillation frequency. If their effective capacitance depends only on \\(V_{\\rm out}-V_{\\rm cont}\\), and other supply effects are negligible,\n\\[\nK_{\\rm DD}\\approx-K_{\\rm VCO},\n\\qquad\nK_{\\rm VCO}=\\frac{\\partial f_{\\rm osc}}{\\partial V_{\\rm cont}}.\n\\]\nThis equivalence is an approximation; obtain the actual \\(K_{\\rm DD}\\) by sweeping \\(V_{\\rm out}\\) while holding \\(V_{\\rm cont}\\) fixed, or by periodic small-signal/noise analysis.\n\nIf \\(S_{\\rm th}\\) describes an **internal** LDO noise source, first transfer it to \\(V_{\\rm out}\\). Add the intrinsic VCO phase-noise contribution in **linear PSD units** to obtain the total. Thus, \\(S_{\\rm th}\\) alone is insufficient for a numerical result—you also need the supply-to-phase sensitivity.",
        "format": "markdown",
        "sha256": "aae732f2fccd42bad75ee31c84fd78dad64e2596119b9791a1ece9e82d2bb9dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, converts LDO voltage-noise PSD to phase noise using the sensitivity and the 1/f_m^2 FM-to-PM relation, and notes the varactor connection makes this sensitivity closely related to KVCO. The added PSD conventions and qualifications are consistent with the golden solution.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 5302,
        "total_tokens": 8696,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4620,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 5302,
        "total_tokens": 8696,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4620,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "You need the VCO’s **supply-pushing sensitivity**, not just the LDO noise spectrum.\n\nAssume \\(S_{\\rm th}(f_m)\\) is the **one-sided voltage-noise PSD at \\(V_{\\rm out}\\)**, in \\(\\mathrm{V^2/Hz}\\), and \\(f_m\\) is the offset from the carrier. Define\n\\[\nK_{\\rm push}=\\left.\\frac{\\partial f_{\\rm osc}}{\\partial V_{\\rm out}}\\right|_{V_{\\rm cont}\\ \\mathrm{fixed}}\n\\qquad [\\mathrm{Hz/V}].\n\\]\n\n### Noise-to-phase conversion\nFor small, slowly varying supply noise \\(v_n(t)\\),\n\\[\n\\delta f_{\\rm osc}(t)=K_{\\rm push}v_n(t),\n\\qquad\n\\frac{d\\phi(t)}{dt}=2\\pi K_{\\rm push}v_n(t).\n\\]\nConsequently, the LDO-induced phase-noise PSD is\n\\[\n\\boxed{\nS_{\\phi,\\rm LDO}(f_m)\n=\\frac{K_{\\rm push}^{\\,2}}{f_m^2}\\,S_{\\rm th}(f_m)\n}\n\\quad [\\mathrm{rad^2/Hz}].\n\\]\n\nThe corresponding single-sideband phase noise is\n\\[\n\\boxed{\n\\mathcal L_{\\rm LDO}(f_m)\n=10\\log_{10}\\!\\left[\n\\frac{K_{\\rm push}^{\\,2}S_{\\rm th}(f_m)}{2f_m^2}\n\\right]\\ \\mathrm{dBc/Hz}.\n}\n\\]\nFor white LDO noise and constant \\(K_{\\rm push}\\), this contribution falls at \\(20\\,\\mathrm{dB/decade}\\).\n\n### How to obtain \\(K_{\\rm push}\\) for this circuit\nThe LDO noise moves the common-mode voltage of \\(X\\) and \\(Y\\). With \\(V_{\\rm cont}\\) held quiet, this changes the MOS-varactor bias and thus the tank capacitance. A simple LC approximation gives\n\\[\nK_{\\rm push}\\simeq\n-\\frac{f_0}{2C_{\\rm eff}}\n\\frac{\\partial C_{\\rm eff}}{\\partial V_{\\rm out}}.\n\\]\nIf varactor-bias modulation dominates and the tank common mode follows \\(V_{\\rm out}\\), then\n\\[\nK_{\\rm push}\\approx -K_{\\rm VCO},\n\\qquad\nK_{\\rm VCO}=\\frac{\\partial f_{\\rm osc}}{\\partial V_{\\rm cont}}.\n\\]\nThus, common-mode injection does **not** necessarily cancel at the differential output: it can modulate the oscillation frequency.\n\nIn practice, obtain \\(K_{\\rm push}\\) from a supply-voltage sweep or small-signal supply-modulation simulation. For frequency-dependent coupling, replace it with the supply-to-frequency transfer function \\(H_{f,V_{\\rm out}}(f_m)\\). If \\(S_{\\rm th}\\) describes an **internal LDO noise source**, first refer it to \\(V_{\\rm out}\\) through the LDO’s noise transfer function. The result above is only the LDO-induced contribution; intrinsic VCO phase noise must be added in linear units.",
        "format": "markdown",
        "sha256": "49ec2a532d9935f991763960ee651dcfc9f2c9d5e3460b173db779ff6bd77084"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, converts LDO voltage-noise PSD to phase noise with the required 1/offset² dependence, and relates Kpush to the varactor sensitivity and KVCO for this circuit. The stated PSD and SSB conventions are consistent.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 5872,
        "total_tokens": 9266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 5872,
        "total_tokens": 9266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Use the VCO’s **supply-to-frequency sensitivity** (“supply pushing”) to convert the LDO voltage noise into frequency noise, then integrate it to obtain phase noise.\n\nLet \\(S_{\\rm th}(f_m)\\) be the **one-sided voltage-noise PSD at \\(V_{\\rm out}\\)**, in \\(\\mathrm{V^2/Hz}\\), and define\n\\[\nK_{\\rm push}=\\frac{\\partial f_{\\rm osc}}{\\partial V_{\\rm out}}\n\\qquad [\\mathrm{Hz/V}],\n\\]\nwith \\(V_{\\rm cont}\\) held fixed. At offsets where this sensitivity is approximately quasistatic,\n\\[\n\\delta f(t)=K_{\\rm push}v_n(t),\n\\qquad\n\\frac{d\\phi}{dt}=2\\pi\\delta f(t).\n\\]\nTherefore, the LDO-induced phase-noise PSD is\n\\[\n\\boxed{\nS_{\\phi,\\rm LDO}(f_m)\n=\\frac{K_{\\rm push}^{\\,2}}{f_m^2}\\,S_{\\rm th}(f_m)\n}\n\\qquad [\\mathrm{rad^2/Hz}].\n\\]\n\nThe corresponding small-noise, single-sideband phase noise is\n\\[\n\\boxed{\n\\mathcal L_{\\rm LDO}(f_m)\n=10\\log_{10}\\!\\left[\n\\frac{K_{\\rm push}^{\\,2}S_{\\rm th}(f_m)}\n{2f_m^2}\n\\right]\\;\\mathrm{dBc/Hz}.\n}\n\\]\nIf the sensitivity is instead specified as \\(K_\\omega=\\partial\\omega_{\\rm osc}/\\partial V_{\\rm out}\\) in \\(\\mathrm{rad/s/V}\\), replace \\(K_{\\rm push}/f_m\\) by \\(K_\\omega/(2\\pi f_m)\\).\n\n### How the noise couples in this circuit\nLow-frequency noise on \\(V_{\\rm out}\\) shifts the common-mode voltage of \\(X\\) and \\(Y\\). Although this is common-mode, it changes the voltage across the MOS varactors and hence the tank capacitance:\n\\[\nf_0\\simeq\\frac{1}{2\\pi\\sqrt{L_1C_{\\rm eff}}},\n\\qquad\nK_{\\rm push}\\simeq\n-\\frac{f_0}{2C_{\\rm eff}}\n\\frac{\\partial C_{\\rm eff}}{\\partial V_{\\rm out}}.\n\\]\nIf the varactors dominate the supply sensitivity and their capacitance depends only on \\(V_{\\rm out}-V_{\\rm cont}\\), then\n\\[\nK_{\\rm push}\\simeq\n-\\frac{\\partial f_0}{\\partial V_{\\rm cont}}\n=-K_{\\rm VCO}.\n\\]\nIn practice, extract \\(K_{\\rm push}\\) by sweeping the regulated supply while holding the tuning voltage fixed; this also captures other supply-dependent effects.\n\nThus, \\(S_{\\rm th}\\) alone is insufficient—you also need the supply-pushing gain. White LDO noise produces a \\(1/f_m^2\\) phase-noise contribution when that gain is constant. Add this contribution to intrinsic VCO phase noise **in linear units**, not in dB.",
        "format": "markdown",
        "sha256": "1d25bb4d6972d33e19aa6a88d61dc2f3226d64d95d9769d2734d0a873f09b4cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly converts LDO voltage noise through the supply-pushing sensitivity into frequency noise and then phase noise with the required 1/f_m^2 dependence. It also identifies the direct varactor coupling and relates Kpush to KVCO; the stated PSD and SSB conventions are consistent with the golden solution.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 4824,
        "total_tokens": 8218,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 4824,
        "total_tokens": 8218,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**A tail capacitor does not necessarily improve phase noise—it can make it worse.** There are two competing effects:\n\n- **Tail-source noise decreases:** \\(C_T\\) bypasses high-frequency noise from \\(I_{SS}\\), particularly noise near \\(2f_0\\) that the switching pair can downconvert into sidebands around \\(f_0\\).\n- **Core noise and tank loading can increase:** A large \\(C_T\\) makes node \\(P\\) approximately AC ground. During large-swing operation, the conducting transistor enters triode, connecting a tank node to that AC ground through its channel resistance. This adds loss and lowers the effective tank \\(Q\\). Bypassing the tail impedance also removes some suppression of the pair’s channel noise.\n\nThus, **in a conventional large-swing oscillator, a large bare \\(C_T\\) can worsen the overall phase noise despite filtering the tail-current-source noise.** It may help when tail-source noise dominates and the added loading is small; the net result depends on capacitance, bias, and oscillation swing.",
        "format": "markdown",
        "sha256": "a00491d0990c7181410c5d1e505c465cb1b0286242e22d5435a2dc3705e1bbad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly rejects a guaranteed phase-noise improvement and describes competing effects, including triode-related loading as a degradation. It misses the key class-C-like improvement mechanism—peak tank currents exceeding ISS—and instead attributes possible benefit mainly to tail-noise filtering.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 7476,
        "total_tokens": 11043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 7476,
        "total_tokens": 11043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**A large \\(C_T\\) can actually worsen phase noise**, even though it bypasses noise from the tail current source. There are two competing effects:\n\n- **Tail-noise reduction:** \\(C_T\\) shunts high-frequency noise from a real \\(I_{SS}\\), particularly noise near \\(2f_0\\) that can mix into the carrier’s vicinity.\n\n- **Increased tank loading:** A large \\(C_T\\) makes node \\(P\\) approximately an RF ground. In normal large-swing operation, \\(M_1\\) and \\(M_2\\) enter triode during part of each cycle. The conducting transistor then connects its tank node to RF ground through its channel resistance. This adds loss, lowers the effective tank \\(Q\\), and can increase phase noise. Without \\(C_T\\), the high tail impedance limits this loading.\n\nThus, **a tail capacitor is not an automatic phase-noise improvement**. If \\(I_{SS}\\) is treated as ideal and noiseless, there is no tail-noise-filtering benefit, and the added loading can make phase noise worse. With a real current source, the net change depends on which mechanism dominates.\n\nThis tradeoff motivates **resonant tail filters**, which suppress tail-source noise while maintaining a high tail impedance near \\(2f_0\\).",
        "format": "markdown",
        "sha256": "58c4a66bff676523a879c17b8dc6ab23c1881def5822e7160fb92bfd49969769"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes competing tail-noise filtering and loading effects, avoiding a blanket phase-noise improvement claim. But it misses the key class-C mechanism that can lower phase noise, along with the stated flicker-noise upconversion or large-CT instability; its triode-loading explanation supports only a generic tradeoff.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 6415,
        "total_tokens": 9982,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6134,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 6415,
        "total_tokens": 9982,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6134,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**A large \\(C_T\\) can worsen phase noise—it is not simply a beneficial noise-bypass capacitor.** There are two competing effects:\n\n- **Tail-noise filtering:** \\(C_T\\) shunts high-frequency noise from the tail current source, particularly noise near \\(2f_0\\) that can mix into sidebands around \\(f_0\\). This can improve phase noise. It does not directly filter the tail source’s near-DC flicker noise.\n\n- **Tank loading:** \\(C_T\\) makes \\(P\\) a low-impedance RF node. In a large-swing oscillator, each cross-coupled transistor enters triode during part of the cycle. Its channel resistance then connects the corresponding tank node to RF ground through \\(C_T\\). This adds loss, lowers the effective tank \\(Q\\), and increases the pair’s noise contribution.\n\nThus, **if \\(I_{SS}\\) is ideal/noiseless, a large \\(C_T\\) generally degrades phase noise in the usual large-swing operating regime**: there is no tail-noise benefit to offset the added loading. With a real, noisy tail source, the net change depends on \\(C_T\\), oscillation amplitude, and which noise contribution dominates.",
        "format": "markdown",
        "sha256": "828eab98c55f6275035887e5672cd5b6e05fd4e5d01f11f120e6cd22e1d8b226"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes competing filtering and large-\u001b[?25lCT\u001b[?25h-related degradation effects, but misses the key class-C mechanism: peak tank currents exceeding ISS can lower phase noise. The triode/loading explanation alone does not capture the expected nonmonotonic behavior.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 4926,
        "total_tokens": 8493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 4926,
        "total_tokens": 8493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **quadrature-coupled LC oscillator**. Let each load inductor be \\(L\\), and let \\(C_T\\) be the total effective capacitance at each output node, including MOS parasitics, which are not drawn.\n\nFor weak coupling, the usual estimate is\n\\[\n\\boxed{f_{\\mathrm{osc}}\\approx \\frac{1}{2\\pi\\sqrt{LC_T}}.}\n\\]\n\nThe pairs biased by \\(I_1\\) establish quadrature and also pull the frequency away from tank resonance. In a simple transconductance model, with coupling-pair transconductance \\(g_c\\), the two possible quadrature modes satisfy\n\\[\n\\omega C_T-\\frac{1}{\\omega L}=\\pm g_c,\n\\]\ngiving\n\\[\n\\omega_{\\pm}\n=\\sqrt{\\frac{1}{LC_T}+\\left(\\frac{g_c}{2C_T}\\right)^2}\n\\ \\pm\\frac{g_c}{2C_T}.\n\\]\nThus both modes lie near \\(1/\\sqrt{LC_T}\\) when coupling is weak.\n\n**No numerical frequency can be obtained from the figure alone:** the inductance and effective capacitance values are not specified.",
        "format": "markdown",
        "sha256": "102474af8cc575b745782e5e0fbd98007196a394e2d38d6a54e99e540b7a1b7c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the tank resonance and quadrature modes, but its only frequency-shift estimate is approximately ±g_c/(2C_T), omitting the required coupling factor such as g_c/g_m1 (or α). Per the golden solution, that unnormalized shift corresponds to the edge-of-oscillation assumption and earns 1.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 9585,
        "total_tokens": 11386,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 9585,
        "total_tokens": 11386,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **quadrature-coupled LC oscillator**. Let each load inductor be \\(L\\), and let \\(C_T\\) be the total capacitance at each output node—including the MOS parasitic capacitances, which are not drawn. The first-order estimate is\n\n\\[\n\\boxed{f_{\\mathrm{osc}}\\approx f_0=\\frac{1}{2\\pi\\sqrt{LC_T}}.}\n\\]\n\nThe pairs biased by \\(I_{\\rm SS}\\) sustain oscillation, while those biased by \\(I_1\\) couple the two cores and establish quadrature. This coupling also pulls the frequency away from tank resonance.\n\nFor a tank quality factor \\(Q\\), a standard current-switching estimate gives\n\\[\nf_\\pm \\approx f_0\\left[\n\\sqrt{1+\\left(\\frac{I_1}{2QI_{\\rm SS}}\\right)^2}\n\\ \\pm\\frac{I_1}{2QI_{\\rm SS}}\n\\right],\n\\]\nwhere the signs correspond to the two possible quadrature phase sequences. For high \\(Q\\) and moderate coupling,\n\\[\nf_\\pm\\approx f_0\\left(1\\pm\\frac{I_1}{2QI_{\\rm SS}}\\right)\\approx f_0.\n\\]\n\nA **numerical frequency cannot be determined from the figure alone**, since neither \\(L\\) nor the output-node capacitance is specified.",
        "format": "markdown",
        "sha256": "fae61726fc3d4f90dfd6ba124ba68f7757cbfffc40e82ce120ab1fdf236d9412"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives the tank resonance and the coupling-induced shift, with the large-signal estimate \u001b[?]",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 14546,
        "total_tokens": 16347,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14241,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 14546,
        "total_tokens": 16347,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14241,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6.1-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **quadrature-coupled LC oscillator**. Let each load inductor be \\(L\\), and let \\(C_T\\) be the total capacitance at each output node, including MOS parasitic capacitances, which are not drawn.\n\nFor weak coupling, the frequency is approximately the resonance of either tank:\n\\[\n\\boxed{f_{\\mathrm{osc}}\\approx \\frac{1}{2\\pi\\sqrt{LC_T}}.}\n\\]\n\nThe transistor pairs biased by \\(I_1\\) introduce some frequency pulling. If their effective differential transconductance is \\(g_c\\), the quadrature modes satisfy\n\\[\n\\omega C_T-\\frac{1}{\\omega L}=\\pm g_c,\n\\]\nafter the inner cross-coupled pairs cancel the tank losses. Hence a more accurate estimate is\n\\[\n\\boxed{\nf_{\\pm}=\\frac{1}{2\\pi}\n\\left[\n\\sqrt{\\frac{1}{LC_T}+\\left(\\frac{g_c}{2C_T}\\right)^2}\n\\ \\pm\\frac{g_c}{2C_T}\n\\right].\n}\n\\]\nThe signs correspond to the two possible quadrature phase sequences.\n\nNo numerical frequency can be calculated from the figure alone: \\(L\\), the effective capacitance, and the coupling strength are unspecified.",
        "format": "markdown",
        "sha256": "de507cd4a05b50ab670653165a274c84a76581285fe81f8b3f34336bac8fddc9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives the tank resonance and identifies quadrature modes, but its only coupling shift is the gc/(2CT) edge-of-oscillation form. It omits the required coupling factor and Q dependence, such as αω0/(2Q) or (gc/gm1)ω0/(2Q).",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 11966,
        "total_tokens": 13767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 11966,
        "total_tokens": 13767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    }
  ]
}
