{
  "model_key": "gpt_6_astra",
  "display_name": "GPT-6 Astra",
  "provider": "openai",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "GPT-6 Astra answered the 50 tasks in three rollouts through OpenRouter's chat completions route (openai/gpt-6-astra) at maximum reasoning effort. Requests set max_tokens to 128,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for GPT-6 Astra on 2026-11-10 ($10.00 input, $1.00 cached input, $50.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 127,
          "incorrect_count": 23,
          "partial_credit_count": 23,
          "zero_count": 0,
          "mean_score_0_to_4": 3.7866666666666666,
          "score_percent": 94.66666666666667,
          "score_distribution": {
            "1": 1,
            "2": 7,
            "3": 15,
            "4": 127
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 127,
          "incorrect_count": 23,
          "partial_credit_count": 23,
          "zero_count": 0,
          "mean_score_0_to_4": 3.7866666666666666,
          "score_percent": 94.66666666666667,
          "score_distribution": {
            "1": 1,
            "2": 7,
            "3": 15,
            "4": 127
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 89,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.988888888888889,
          "score_percent": 99.72222222222223,
          "score_distribution": {
            "3": 1,
            "4": 89
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 89,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.988888888888889,
          "score_percent": 99.72222222222223,
          "score_distribution": {
            "3": 1,
            "4": 89
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 38,
          "incorrect_count": 22,
          "partial_credit_count": 22,
          "zero_count": 0,
          "mean_score_0_to_4": 3.4833333333333334,
          "score_percent": 87.08333333333333,
          "score_distribution": {
            "1": 1,
            "2": 7,
            "3": 14,
            "4": 38
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 38,
          "incorrect_count": 22,
          "partial_credit_count": 22,
          "zero_count": 0,
          "mean_score_0_to_4": 3.4833333333333334,
          "score_percent": 87.08333333333333,
          "score_distribution": {
            "1": 1,
            "2": 7,
            "3": 14,
            "4": 38
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 42,
        "incorrect_count": 8,
        "partial_credit_count": 8,
        "zero_count": 0,
        "mean_score_0_to_4": 3.76,
        "score_percent": 94.0,
        "score_distribution": {
          "2": 4,
          "3": 4,
          "4": 42
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 43,
        "incorrect_count": 7,
        "partial_credit_count": 7,
        "zero_count": 0,
        "mean_score_0_to_4": 3.82,
        "score_percent": 95.5,
        "score_distribution": {
          "2": 2,
          "3": 5,
          "4": 43
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 42,
        "incorrect_count": 8,
        "partial_credit_count": 8,
        "zero_count": 0,
        "mean_score_0_to_4": 3.78,
        "score_percent": 94.5,
        "score_distribution": {
          "1": 1,
          "2": 1,
          "3": 6,
          "4": 42
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 177440,
        "input_tokens": 272871,
        "output_tokens": 839651,
        "total_tokens": 1112522
      },
      "known_totals": {
        "cached_input_tokens": 177440,
        "input_tokens": 272871,
        "output_tokens": 839651,
        "total_tokens": 1112522
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 29,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.966666666666667,
          "score_percent": 99.16666666666667,
          "score_distribution": {
            "3": 1,
            "4": 29
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 30,
          "incorrect_count": 0,
          "partial_credit_count": 0,
          "zero_count": 0,
          "mean_score_0_to_4": 4.0,
          "score_percent": 100.0,
          "score_distribution": {
            "4": 30
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 30,
          "incorrect_count": 0,
          "partial_credit_count": 0,
          "zero_count": 0,
          "mean_score_0_to_4": 4.0,
          "score_percent": 100.0,
          "score_distribution": {
            "4": 30
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 13,
          "incorrect_count": 7,
          "partial_credit_count": 7,
          "zero_count": 0,
          "mean_score_0_to_4": 3.45,
          "score_percent": 86.25,
          "score_distribution": {
            "2": 4,
            "3": 3,
            "4": 13
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 13,
          "incorrect_count": 7,
          "partial_credit_count": 7,
          "zero_count": 0,
          "mean_score_0_to_4": 3.55,
          "score_percent": 88.75,
          "score_distribution": {
            "2": 2,
            "3": 5,
            "4": 13
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 12,
          "incorrect_count": 8,
          "partial_credit_count": 8,
          "zero_count": 0,
          "mean_score_0_to_4": 3.45,
          "score_percent": 86.25,
          "score_distribution": {
            "1": 1,
            "2": 1,
            "3": 6,
            "4": 12
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Its intrinsic gain approximately doubles**, assuming the same bias current, saturation operation, and the usual long-channel scaling model.\n\nIntrinsic gain is\n\\[\nA_{\\text{int}}=g_m r_o.\n\\]\n\n- Doubling both \\(W\\) and \\(L\\) leaves \\(W/L\\) unchanged, so at fixed \\(I_D\\),\n  \\[\n  g_m\\approx\\sqrt{2\\mu C_{\\text{ox}}\\frac{W}{L}I_D}\n  \\]\n  stays unchanged.\n- Channel-length modulation typically scales as \\(\\lambda\\propto 1/L\\). Doubling \\(L\\) therefore approximately doubles\n  \\[\n  r_o\\approx\\frac{1}{\\lambda I_D}.\n  \\]\n\nThus,\n\\[\n\\boxed{A_{\\text{int,new}}\\approx 2A_{\\text{int,old}}.}\n\\]\n\nThe exact change can differ in short-channel devices.",
        "format": "markdown",
        "sha256": "8aca9455172c68d083fb8fd5715fcd991c8ec84a5206a58db46dc3997d50b6f4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: doubling both dimensions preserves W/L and gm at fixed current, while the longer channel approximately doubles ro. The stated assumptions are consistent with the golden solution.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1346,
        "total_tokens": 1372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1143,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1346,
        "total_tokens": 1372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1143,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Its intrinsic gain approximately doubles**, assuming the same bias current and long-channel saturation operation.\n\nThe intrinsic gain is\n\\[\nA_{\\text{int}}=g_m r_o.\n\\]\n\n- Doubling both \\(W\\) and \\(L\\) leaves \\(W/L\\) unchanged, so \\(g_m\\) stays approximately constant at fixed drain current.\n- Channel-length modulation roughly follows \\(\\lambda\\propto 1/L\\). Doubling \\(L\\) therefore halves \\(\\lambda\\), doubling \\(r_o\\approx 1/(\\lambda I_D)\\).\n\nThus,\n\\[\n\\boxed{A_{\\text{int,new}}\\approx 2A_{\\text{int,old}}.}\n\\]\n\nThe exact change depends on the bias conditions and device technology, especially for short-channel MOSFETs.",
        "format": "markdown",
        "sha256": "cd7691c116c9143ccf90fae0e4ea6de02f897324f6c2e23901e9b64c32db29e5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: scaling W and L together preserves W/L and gm at the stated bias, while doubling L roughly halves channel-length modulation and doubles ro. The bias and technology caveats are appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1209,
        "total_tokens": 1235,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1209,
        "total_tokens": 1235,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Under the usual long-channel approximation, **the intrinsic gain approximately doubles**, assuming the drain current stays fixed.\n\nThe intrinsic gain is\n\\[\nA_{\\text{int}}=g_m r_o.\n\\]\n\n- **Transconductance:** \\(g_m=\\sqrt{2\\mu C_{\\text{ox}}(W/L)I_D}\\). Doubling both \\(W\\) and \\(L\\) leaves \\(W/L\\) unchanged, so \\(g_m\\) stays the same.\n- **Output resistance:** \\(r_o\\approx 1/(\\lambda I_D)\\). Since channel-length modulation roughly follows \\(\\lambda\\propto 1/L\\), doubling \\(L\\) approximately doubles \\(r_o\\).\n\nThus,\n\\[\n\\boxed{A_{\\text{int,new}}\\approx 2A_{\\text{int,old}}.}\n\\]\n\nThe exact scaling depends on bias conditions and short-channel effects.",
        "format": "markdown",
        "sha256": "8b1e06d73994e3c9bbf07ce913176546722e8dbb44c559979116c740ab2f39a0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: doubling W and L preserves W/L and gm, while the longer channel approximately doubles ro. The stated fixed-current assumption is consistent with the ideal model, and the answer notes relevant limitations.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1230,
        "total_tokens": 1256,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1230,
        "total_tokens": 1256,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**It depends on what is held fixed—but for the same MOSFET in the usual saturation model, Student A is correct.**\n\nFor a long-channel MOSFET in strong-inversion saturation,\n\\[\nI_D=\\frac12\\beta V_{\\mathrm{OV}}^2,\n\\qquad\ng_m=\\beta V_{\\mathrm{OV}}=\\frac{2I_D}{V_{\\mathrm{OV}}},\n\\]\nwhere \\(\\beta=\\mu C_{\\mathrm{ox}}W/L\\).\n\n- **Fixed device geometry:** \\(\\beta\\) is constant, so increasing overdrive increases \\(g_m\\). **A is correct.**\n- **Fixed drain current, with device sizing changed:** \\(g_m=2I_D/V_{\\mathrm{OV}}\\), so increasing overdrive decreases \\(g_m\\). **B is correct for this design comparison.**\n\nThe key is that, for an unchanged transistor, you cannot treat \\(I_D\\) as constant when increasing overdrive: it increases too.",
        "format": "markdown",
        "sha256": "d8984ea6fba6d180233a560bcde6e072f268c3be865f71d427eac90b912e4995"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size, explains that current rises with overdrive, and gives the fixed-current sizing condition under which Student B is right.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1765,
        "total_tokens": 1803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1765,
        "total_tokens": 1803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**It depends on what is held constant.** Under the usual long-channel, square-law saturation model,\n\n\\[\nI_D=\\frac12 kV_{\\text{OV}}^2,\n\\qquad\ng_m=kV_{\\text{OV}}=\\frac{2I_D}{V_{\\text{OV}}},\n\\]\nwhere \\(k=\\mu C_{\\text{ox}}W/L\\) and \\(V_{\\text{OV}}=V_{GS}-V_T\\).\n\n- **Same transistor, fixed geometry:** \\(k\\) is constant, so increasing overdrive increases \\(g_m\\). **Student A is correct.**\n- **Fixed drain current, with device sizing adjusted:** \\(g_m=2I_D/V_{\\text{OV}}\\), so increasing overdrive decreases \\(g_m\\). **Student B is correct.**\n\nThere is no contradiction: for a fixed transistor, \\(I_D\\) also increases with overdrive—it cannot be treated as constant.\n\nSo, **for an ordinary gate-voltage sweep of one MOSFET kept in saturation, A is correct; for a fixed-current sizing comparison, B is correct.**",
        "format": "markdown",
        "sha256": "d4dc25c85829f34f08f44dc991946ce1e694c87af0934d1465b91cd7f5df8973"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed transistor size and explains that current rises with overdrive. It also accurately states the distinct fixed-current condition under which Student B is right.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1567,
        "total_tokens": 1605,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1327,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1567,
        "total_tokens": 1605,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1327,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both can be correct—it depends on what is held constant.**\n\nFor a MOSFET in the usual long-channel saturation model, with overdrive \\(V_{\\text{OV}}=V_{GS}-V_{TH}\\),\n\\[\ng_m=\\mu C_{\\text{ox}}\\frac WL V_{\\text{OV}}\n=\\frac{2I_D}{V_{\\text{OV}}}.\n\\]\n\n- **Fixed transistor size \\(W/L\\): Student A is correct.** Increasing overdrive increases \\(g_m\\). The drain current also increases, so you cannot treat \\(I_D\\) as constant in the second expression.\n- **Fixed drain current \\(I_D\\): Student B is correct.** When comparing designs with the same current, larger overdrive means smaller \\(g_m\\). The transistor size must be adjusted to maintain that current.\n\nThus, for **one fixed transistor whose gate voltage is increased while remaining in saturation**, A is correct under this model.",
        "format": "markdown",
        "sha256": "7dbf16e62d46a4661ea1849931b57c292bb668b5aac4dbee310e0b147af3a062"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that Student A is right for a fixed transistor size, explains that drain current rises with overdrive, and accurately notes Student B’s fixed-current condition.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1757,
        "total_tokens": 1795,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1757,
        "total_tokens": 1795,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—the small-signal model has the same form**, provided voltage and current reference directions are consistent. The parameter values need not be identical.\n\nFor either device in saturation, neglecting body effect and capacitances,\n\\[\ni_d=g_m v_{gs}+\\frac{v_{ds}}{r_o},\n\\]\nwhere \\(i_d\\) is the **incremental drain-to-source current**, and \\(g_m,r_o>0\\). Both therefore have:\n- An ideally open-circuit gate.\n- A controlled current source \\(g_m v_{gs}\\) from drain to source.\n- An output resistance \\(r_o\\) between drain and source.\n\nA PMOS is often drawn instead with a current source **\\(g_m v_{sg}\\) from source to drain**. This is exactly equivalent: reversing both the controlling-voltage polarity and the current arrow leaves the model unchanged.\n\nWhat differs is the **DC bias polarity** and generally the numerical values of \\(g_m\\), \\(r_o\\), and parasitic capacitances.",
        "format": "markdown",
        "sha256": "ec5a6a6287d457fe1db99c11a600a89907f13061567b152248d68b5480f4f91b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says the PMOS model has the same form with consistent reference conventions; the polarity and parameter-value qualifications are appropriate.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2186,
        "total_tokens": 2212,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1966,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2186,
        "total_tokens": 2212,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1966,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—in structure, provided you use consistent voltage and current reference directions.** Their parameter values need not be identical.\n\nFor the usual low-frequency model, neglecting body effect, define\n\\[\nv_{gs}=v_g-v_s,\\qquad v_{ds}=v_d-v_s,\n\\]\nand define \\(i_d\\) as positive from drain to source. Then **both NMOS and PMOS** satisfy\n\\[\ni_d=g_m v_{gs}+\\frac{v_{ds}}{r_o},\n\\]\nwith \\(g_m\\) and \\(r_o\\) positive. Thus, both can use the same equivalent circuit:\n- An ideally open-circuit gate.\n- A controlled current source \\(g_m v_{gs}\\) directed from drain to source.\n- An output resistance \\(r_o\\) between drain and source.\n\nFor a PMOS, it is also common to draw the controlled source as **\\(g_m v_{sg}\\), directed from source to drain**. This is equivalent: \\(v_{sg}=-v_{gs}\\), and reversing the current-source arrow introduces the other sign change.\n\nWhat differs is the **DC bias polarity** and generally the numerical values of \\(g_m\\), \\(r_o\\), and other parameters. Including body effect and capacitances also gives the same model structure, though not necessarily the same values.",
        "format": "markdown",
        "sha256": "e26f416e3dda60b7ca4d67ac8050128356dfc5b1f999901cc7a274b81cb21f47"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says the PMOS model is the same in structure with consistent reference directions; the full-credit rule applies. Parameter values and polarity conventions are appropriately distinguished.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2093,
        "total_tokens": 2119,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2093,
        "total_tokens": 2119,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—the usual small-signal model has the same structure**, provided voltage and current sign conventions are consistent. Its parameter values need not be identical.\n\nFor example, define \\(i_d\\) as positive from drain to source and \\(v_{gs}=v_g-v_s\\). Neglecting body effect and capacitances, **both NMOS and PMOS** can be modeled by\n\\[\ni_d=g_m v_{gs}+\\frac{v_{ds}}{r_o},\n\\]\nwith \\(g_m>0\\). Thus the same circuit—an open-circuit gate, a controlled current source, and \\(r_o\\)—works for both.\n\nFor a PMOS, it is also common to draw the controlled source as \\(g_m v_{sg}\\), directed **from source to drain**. Since \\(v_{sg}=-v_{gs}\\), this is equivalent. You must reverse **both** the controlling-voltage polarity and the current-source arrow, not just one.\n\nThe main differences are the **DC bias polarities** and the numerical values of \\(g_m\\), \\(r_o\\), and parasitic capacitances.",
        "format": "markdown",
        "sha256": "50b09cfbdc6fe0a1e7760fa67252191fe37fac254f9f04ab39cc58adc62d6fe8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS model has the same small-signal structure with consistent sign conventions; the parameter values and DC bias polarities may differ.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2830,
        "total_tokens": 2856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2830,
        "total_tokens": 2856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) is a **diode-connected NMOS**: its gate and drain are tied together. Thus\n\\[\nV_{GS}=V_{DS}=V_X,\\qquad I_X=I_D.\n\\]\n\nWhenever it is on, it is in **saturation**, since \\(V_{DS}\\ge V_{GS}-V_{TH}\\) is automatically satisfied.\n\nUsing the ideal square-law model,\n\\[\n\\boxed{\nI_X=\n\\begin{cases}\n0, & V_X\\le V_{TH},\\\\[4pt]\n\\dfrac12\\mu_n C_{\\mathrm{ox}}\\dfrac WL\\,(V_X-V_{TH})^2,\n& V_X>V_{TH}.\n\\end{cases}}\n\\]\n\n```text\n I_X\n  ↑\n  |                              /\n  |                             /\n  |                           .'\n  |                        .-'\n  |                   _..-'\n  |________________.-'____________→ V_X\n  0               V_TH\n```\n\nThe current is zero up to \\(V_{TH}\\), then rises **parabolically**; there is no triode-region segment.\n\n*This sketch neglects channel-length modulation, subthreshold current, and body-diode conduction.*",
        "format": "markdown",
        "sha256": "ce359056a818b742164db0df60240877a72e4eaa2b9e52361a07c48e150c1490"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current through threshold and a quadratic rise above it, and correctly notes saturation operation.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 3010,
        "total_tokens": 4216,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 3010,
        "total_tokens": 4216,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) is a **diode-connected NMOS**, so\n\\[\nV_{GS}=V_{DS}=V_X,\\qquad I_X=I_D.\n\\]\n\nFor \\(V_X\\le V_{TH}\\), it is off. When \\(V_X>V_{TH}\\), it is always in **saturation**, because\n\\[\nV_{DS}\\ge V_{GS}-V_{TH}.\n\\]\n\nThus, using the ideal square-law model,\n\\[\n\\boxed{\nI_X=\n\\begin{cases}\n0, & V_X\\le V_{TH},\\\\[4pt]\n\\dfrac12\\mu_n C_{\\mathrm{ox}}\\dfrac WL(V_X-V_{TH})^2,\n& V_X>V_{TH}.\n\\end{cases}}\n\\]\n\n```text\n I_X\n  ↑\n  |                             /\n  |                           .'\n  |                        .'\n  |                   _.-'\n  |_________________•________________→ V_X\n  0                V_TH\n```\n\nThe curve is zero up to \\(V_{TH}\\), then rises as a concave-up parabola—there is no triode-region segment. This sketch neglects channel-length modulation, leakage, and body-diode conduction.",
        "format": "markdown",
        "sha256": "d0de324f4eb302fc53b7c26d1d023612d59269c21de032be57e2e6abe91f01ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives the required zero current up to threshold and quadratic rise above threshold. The saturation reasoning and ideal-model caveats are appropriate.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 1997,
        "total_tokens": 3203,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 1997,
        "total_tokens": 3203,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) is a **diode-connected NMOS**, so\n\\[\nV_{GS}=V_{DS}=V_X,\\qquad I_X=I_D.\n\\]\nWhenever it is on, \\(V_{DS}\\ge V_{GS}-V_{TN}\\); therefore it is always in **saturation**, never in triode.\n\nUsing the ideal square-law model (neglecting channel-length modulation and body-diode conduction),\n\\[\n\\boxed{\nI_X=\n\\begin{cases}\n0, & V_X\\le V_{TN},\\\\[4pt]\n\\dfrac12\\mu_n C_{\\mathrm{ox}}\\dfrac WL\n(V_X-V_{TN})^2, & V_X>V_{TN}.\n\\end{cases}}\n\\]\n\n```text\n I_X\n  ↑\n  │                            /\n  │                          _/\n  │                        _/\n  │                     __/\n  │                ____/\n  └──────────────●────────────────→ V_X\n  0             V_TN\n```\n\nThus, the current is zero up to the threshold voltage and then rises **parabolically**.",
        "format": "markdown",
        "sha256": "ccfa21138ca90f3e64539d8cdae8182f62f7c54badd3d15e1821d51abf982056"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its saturation operation when on, and the near-zero current below threshold followed by a quadratic rise above threshold.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 3238,
        "total_tokens": 4444,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2995,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 3238,
        "total_tokens": 4444,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2995,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The source is grounded, so\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\,\\text{V},\\qquad I_X=I_D.\n\\]\n\nUsing the ideal long-channel NMOS model, neglecting channel-length modulation, define \\(\\beta_n=\\mu_n C_{\\mathrm{ox}}W/L\\). Then\n\\[\n\\boxed{\nI_X=\n\\begin{cases}\n0,\n& V_X\\le V_{TH}\\quad\\text{(cutoff)},\\\\[2mm]\n\\dfrac{\\beta_n}{2}(V_X-V_{TH})^2,\n& V_{TH}<V_X\\le V_{TH}+1\\,\\text{V}\n\\quad\\text{(saturation)},\\\\[2mm]\n\\beta_n\\!\\left[(V_X-V_{TH})(1\\,\\text{V})\n-\\dfrac{(1\\,\\text{V})^2}{2}\\right],\n& V_X>V_{TH}+1\\,\\text{V}\\quad\\text{(triode)}.\n\\end{cases}}\n\\]\n\nThus the sketch is **zero → upward-curving parabola → straight line**:\n\n```text\n I_X\n  ↑\n  │                                  /  Triode\n  │                                /    (linear)\n  │                              ●\n  │                            .'┆\n  │                         .-'  ┆\n  │                    __.-'     ┆\n  │              __..-'          ┆\n  └─────────────┬────────────────┬────────→ V_X\n               V_TH          V_TH + 1 V\n      Cutoff        Saturation\n                    (parabolic)\n```\n\nThe saturation–triode boundary occurs when\n\\[\nV_{GS}-V_{TH}=V_{DS}=1\\,\\text{V}.\n\\]\nAt this point, \\(I_X=\\tfrac12\\beta_n(1\\,\\text{V})^2\\). The parabola and straight line join smoothly, with the same slope \\(\\beta_n(1\\,\\text{V})\\).",
        "format": "markdown",
        "sha256": "6a293b35c9f10569d3436ced6038367058c74dbaa743ca66dedafef037d68289"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives cutoff below threshold, a quadratic saturation rise up to VTH + 1 V, and a roughly linear triode rise beyond that, matching the full-credit rule.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 2771,
        "total_tokens": 4140,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2323,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 2771,
        "total_tokens": 4140,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2323,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume an enhancement NMOS with threshold \\(V_T\\), neglecting channel-length modulation. Here,\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\,\\text{V},\\qquad I_X=I_D.\n\\]\n\nDefining \\(\\beta_n=\\mu_n C_{\\mathrm{ox}}(W/L)\\),\n\\[\n\\boxed{\nI_X=\n\\begin{cases}\n0,\n& V_X\\le V_T \\quad\\text{(cutoff)},\\\\[2mm]\n\\dfrac{\\beta_n}{2}(V_X-V_T)^2,\n& V_T<V_X\\le V_T+1\\,\\text{V}\\quad\\text{(saturation)},\\\\[2mm]\n\\beta_n\\!\\left[(V_X-V_T)(1\\,\\text{V})\n-\\dfrac{(1\\,\\text{V})^2}{2}\\right],\n& V_X>V_T+1\\,\\text{V}\\quad\\text{(triode)}.\n\\end{cases}}\n\\]\n\nThus the sketch is **zero, then quadratic, then linear**:\n\n```text\n I_X\n  ↑\n  |                                 /  Triode: linear\n  |                               /\n  |                             /\n  |                           ●\n  |                         .':\n  |                      .-'  :\n  |                  _.-'     :   Saturation: quadratic\n  |_______________.-'         :\n  +---------------|-----------|----------→ V_X\n                 V_T       V_T + 1 V\n        Cutoff\n```\n\nThe parabola and straight line join smoothly at\n\\[\nV_X=V_T+1\\,\\text{V},\\qquad I_X=\\frac{\\beta_n}{2}(1\\,\\text{V})^2.\n\\]\nSaturation occurs first because its condition is \\(V_{DS}\\ge V_{GS}-V_T\\).",
        "format": "markdown",
        "sha256": "c32ee466cdda3fbcc27d6625fcb9a3534295238674c5c596b3196d70174b17da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, the quadratic saturation region up to V_X = V_T + 1 V, and the roughly linear triode-region rise beyond it, with consistent boundary current and assumptions.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 3679,
        "total_tokens": 5048,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3270,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 3679,
        "total_tokens": 5048,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3270,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Here \\(V_{GS}=V_X\\), \\(V_{DS}=1\\,\\mathrm V\\), and \\(I_X=I_D\\). Assuming the ideal square-law NMOS model, define\n\\[\n\\beta_n=\\mu_n C_{\\mathrm{ox}}\\frac WL.\n\\]\n\nThen\n\\[\n\\boxed{\nI_X=\n\\begin{cases}\n0,\n& V_X\\le V_{TH}\\quad\\text{(cutoff)},\\\\[4pt]\n\\dfrac{\\beta_n}{2}(V_X-V_{TH})^2,\n& V_{TH}<V_X\\le V_{TH}+1\\,\\mathrm V\n\\quad\\text{(saturation)},\\\\[6pt]\n\\beta_n(1\\,\\mathrm V)\\big(V_X-V_{TH}-0.5\\,\\mathrm V\\big),\n& V_X>V_{TH}+1\\,\\mathrm V\n\\quad\\text{(triode)}.\n\\end{cases}}\n\\]\n\nThus the sketch is **zero, then quadratic, then linear**:\n\n```text\n I_X\n  ↑\n  │                                 /  Triode: linear\n  │                              /\n  │                           ●\n  │                        .´\n  │                    _.-´     Saturation: quadratic\n  │               __.-´\n  └──────────────●────────────┬──────────→ V_X\n                V_TH       V_TH + 1 V\n       Cutoff\n```\n\nThe saturation–triode boundary occurs when\n\\[\nV_{GS}-V_{TH}=V_{DS}=1\\,\\mathrm V.\n\\]\nAt this point, \\(I_X=\\tfrac12\\beta_n(1\\,\\mathrm V)^2\\), and the parabola joins the straight line **smoothly, with the same slope**.",
        "format": "markdown",
        "sha256": "9d4e0bcd4adda7a971a424bd9cf0a04ba67a62b9b4d1c131bd6b3476937739f6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, quadratic saturation, and roughly linear triode regions, with the correct transition at V_X = V_TH + 1 V and matching current expressions.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 3241,
        "total_tokens": 4610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 3241,
        "total_tokens": 4610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not as a constant-current source at the upper terminal.** \\(M_1\\) is a **diode-connected pMOS**, since its gate and drain are both grounded.\n\nIf the upper-terminal voltage is \\(V_X\\), then\n\\[\nV_{SG}=V_{SD}=V_X.\n\\]\nWhen \\(V_X>|V_{TP}|\\), the transistor is in saturation, but its current is approximately\n\\[\nI_X=\\frac{1}{2}\\mu_p C_{\\mathrm{ox}}\\frac WL\n\\left(V_X-|V_{TP}|\\right)^2,\n\\]\nneglecting channel-length modulation.\n\nThus, changing the terminal voltage changes the gate–source voltage and therefore changes \\(I_X\\) substantially. **Saturation alone is not sufficient for current-source behavior:** the gate–source voltage must also remain fixed as the output voltage varies. This connection instead behaves as a nonlinear resistive load.",
        "format": "markdown",
        "sha256": "ec502ebcc48307979cb035177076104bac82c7194b82f3fc27cfcc23ae65fe88"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the diode-connected PMOS, its terminal voltages, and why its current varies with terminal voltage. It misses the key explicit low-impedance result (about 1/gm) required for full credit.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 1752,
        "total_tokens": 2252,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 1752,
        "total_tokens": 2252,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not as connected.** The upper terminal is the PMOS **source**, while its gate and drain are both grounded. Thus, \\(M_1\\) is diode-connected.\n\nIf the upper-terminal voltage is \\(V_X\\), then\n\\[\nV_{SG}=V_{SD}=V_X.\n\\]\nWhen \\(V_X>|V_{TP}|\\), the transistor is on and in saturation, but its current is approximately\n\\[\nI_X=\\frac12\\mu_p C_{\\mathrm{ox}}\\frac WL\n\\left(V_X-|V_{TP}|\\right)^2.\n\\]\nHence, the current varies strongly with terminal voltage—it is not constant. Its incremental resistance is roughly \\(1/g_m\\), rather than the high resistance desired for a current source.\n\nA PMOS current source instead keeps \\(V_{SG}\\) fixed and takes the output at the **drain**, while maintaining saturation.",
        "format": "markdown",
        "sha256": "f88f0aa002efd8674926d95f2074f4d157ab0d30129d213eb9f82d2c02643ff8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a diode-connected PMOS, explains its voltage-dependent current and low incremental resistance of about 1/gm, and concludes it cannot act as a current source as drawn.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 2588,
        "total_tokens": 3088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2392,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 2588,
        "total_tokens": 3088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2392,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not as a constant-current source at the upper terminal.**\n\n\\(M_1\\) is a **diode-connected PMOS**: its gate and drain are grounded, and the upper terminal is its source. If that terminal’s voltage is \\(V_X\\), then\n\\[\nV_{SG}=V_{SD}=V_X.\n\\]\n\nWhen \\(V_X>|V_{TP}|\\), the device operates in saturation, but its current is approximately\n\\[\nI_X=\\frac12\\mu_p C_{\\mathrm{ox}}\\frac WL\n\\left(V_X-|V_{TP}|\\right)^2,\n\\]\nneglecting channel-length modulation.\n\nThus, changing the terminal voltage changes \\(V_{SG}\\) and therefore the current. **Saturation alone does not make it a current source; \\(V_{SG}\\) must also remain fixed.** This connection instead behaves as a nonlinear resistance, with small-signal resistance approximately \\(1/g_m\\).",
        "format": "markdown",
        "sha256": "1464b1976e229b406d99a9ac1c3b11980b62ab93b321de8f20b69a19cdf63c4a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a diode-connected PMOS with the terminals read correctly, and explains that its voltage-dependent current and low small-signal resistance (about 1/gm) mean it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 2520,
        "total_tokens": 3020,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2313,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 2520,
        "total_tokens": 3020,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2313,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **PMOS common-source amplifier with source degeneration**: \\(R_S\\) provides negative feedback, and \\(R_D\\) converts drain-current changes into an output voltage.\n\nAssume low-frequency operation, an ideal \\(V_{DD}\\), and negligible body effect.\n\n## 1. DC operating point\n\nDefine \\(I_D>0\\) as the current flowing from \\(V_{DD}\\) through \\(R_S\\), \\(M_1\\), and \\(R_D\\). Then\n\\[\nV_S=V_{DD}-I_D R_S,\\qquad\nV_{\\text{out}}=I_D R_D,\n\\]\nso\n\\[\nV_{SG}=V_{DD}-I_D R_S-V_{\\text{in}},\n\\qquad\nV_{SD}=V_{DD}-I_D(R_S+R_D).\n\\]\n\nLet \\(V_T=|V_{TP}|\\) and \\(\\beta_p=\\mu_p C_{\\text{ox}}W/L\\).\n\n### Saturation\nNeglecting channel-length modulation, the bias current satisfies\n\\[\n\\boxed{\nI_D=\\frac{\\beta_p}{2}\n\\left(V_{DD}-V_{\\text{in}}-I_D R_S-V_T\\right)^2\n}\n\\]\nprovided\n\\[\nV_{SG}>V_T,\\qquad V_{SD}\\ge V_{SG}-V_T.\n\\]\nThe second condition simplifies to\n\\[\n\\boxed{V_{\\text{out}}\\le V_{\\text{in}}+V_T.}\n\\]\n\nSolving the current equation and checking these conditions determines the operating point.\n\n### Other operating regions\n- **Cutoff:** If \\(V_{\\text{in}}\\ge V_{DD}-V_T\\), then \\(I_D\\approx0\\) and \\(V_{\\text{out}}\\approx0\\).\n- **Triode:** If the transistor is on but \\(V_{\\text{out}}>V_{\\text{in}}+V_T\\), use\n  \\[\n  I_D=\\beta_p\\left[(V_{SG}-V_T)V_{SD}-\\frac{V_{SD}^2}{2}\\right]\n  \\]\n  together with the resistor equations above.\n\n## 2. Small-signal voltage gain\n\nFor amplification, bias \\(M_1\\) in saturation. Define\n\\[\ng_m=\\beta_p(V_{SG}-V_T)=\\frac{2I_D}{V_{SG}-V_T}.\n\\]\n\nInitially neglect the transistor’s output conductance (\\(r_o\\to\\infty\\)). Since \\(V_{DD}\\) is AC ground,\n\\[\nv_s=-i_dR_S,\\qquad\ni_d=g_m(v_s-v_{\\text{in}}),\\qquad\nv_{\\text{out}}=i_dR_D.\n\\]\nCombining these gives\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-\\frac{g_mR_D}{1+g_mR_S}.\n}\n\\]\n\nThe negative sign means the stage is **inverting**: increasing the gate voltage reduces PMOS current and lowers the output voltage.\n\nUseful limits are\n\\[\nR_S=0:\\quad A_v=-g_mR_D,\n\\]\n\\[\ng_mR_S\\gg1:\\quad \\boxed{A_v\\approx-\\frac{R_D}{R_S}}.\n\\]\n\n### Including finite \\(r_o\\)\nWith channel-length modulation included,\n\\[\n\\boxed{\nA_v=\n-\\frac{g_mR_D}\n{1+g_mR_S+(R_D+R_S)/r_o}.\n}\n\\]\n\n## 3. Input and output resistance\n\nIgnoring gate leakage and capacitance,\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty.}\n\\]\n\nWith the input AC-grounded, the output resistance is\n\\[\n\\boxed{\nR_{\\text{out}}\n=R_D\\parallel\\left[r_o+(1+g_mr_o)R_S\\right].\n}\n\\]\nThus, if \\(r_o\\) is very large, \\(R_{\\text{out}}\\approx R_D\\).\n\nOverall, \\(R_S\\) reduces gain but improves linearity and reduces sensitivity to transistor parameters.",
        "format": "markdown",
        "sha256": "7bbaf615e28ee0ef2a776e25fa6ab43fee04f7832e86f0a65950897a78630dae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain \u0000-g_mR_D/(1+g_mR_S)\u0000. The additional finite-\u0000r_o\u0000 gain and output-resistance expressions are also consistent.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 4914,
        "total_tokens": 6340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4011,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 4914,
        "total_tokens": 6340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4011,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **PMOS common-source amplifier with source degeneration**: \\(R_S\\) introduces negative feedback, and the output is taken at the drain.\n\nAssume negligible body effect, an ideal \\(V_{DD}\\), and a constant threshold magnitude \\(T=|V_{TP}|\\).\n\n## 1. DC operating point\n\nDefine \\(I_D>0\\) flowing from \\(V_{DD}\\), through \\(M_1\\), to \\(R_D\\). Then\n\\[\nV_S=V_{DD}-I_DR_S,\\qquad V_{\\text{out}}=I_DR_D,\n\\]\nso\n\\[\nV_{SG}=V_{DD}-I_DR_S-V_{\\text{in}},\n\\qquad\nV_{SD}=V_{DD}-I_D(R_S+R_D).\n\\]\n\nFor saturation, neglecting channel-length modulation,\n\\[\n\\boxed{\nI_D=\\frac{\\beta_p}{2}\n\\left(V_{DD}-I_DR_S-V_{\\text{in}}-T\\right)^2\n}\n\\]\nwhere \\(\\beta_p=\\mu_p C_{\\text{ox}}W/L\\). This equation determines the bias current, and hence \\(V_{\\text{out}}\\).\n\nIts validity conditions are\n\\[\nV_{SG}>T,\\qquad V_{SD}\\ge V_{SG}-T.\n\\]\nThe second condition simplifies to\n\\[\n\\boxed{V_{\\text{out}}\\le V_{\\text{in}}+T.}\n\\]\n\n- **Cutoff:** If \\(V_{\\text{in}}\\ge V_{DD}-T\\), then \\(I_D\\approx0\\) and \\(V_{\\text{out}}\\approx0\\).\n- **Triode:** If the transistor is on but \\(V_{SD}<V_{SG}-T\\), use\n  \\[\n  I_D=\\beta_p\\left[(V_{SG}-T)V_{SD}-\\frac{V_{SD}^2}{2}\\right]\n  \\]\n  instead of the saturation equation.\n\n## 2. Small-signal voltage gain\n\nSuppose the transistor is biased in saturation. At low/midband frequencies, take \\(V_{DD}\\) as ac ground and initially neglect \\(r_o\\).\n\nUsing lowercase symbols for small-signal quantities,\n\\[\ni_d=g_m(v_s-v_{\\text{in}}),\\qquad\nv_s=-i_dR_S,\\qquad\nv_{\\text{out}}=i_dR_D.\n\\]\nTherefore,\n\\[\ni_d(1+g_mR_S)=-g_mv_{\\text{in}},\n\\]\ngiving\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-\\frac{g_mR_D}{1+g_mR_S}\n}\n\\]\nwith\n\\[\ng_m=\\frac{2I_D}{V_{SG}-T}.\n\\]\n\nImportant limits:\n\\[\nR_S=0:\\quad A_v=-g_mR_D,\n\\]\n\\[\ng_mR_S\\gg1:\\quad\n\\boxed{A_v\\approx-\\frac{R_D}{R_S}}.\n\\]\n\nThus, source degeneration reduces gain but makes it less sensitive to transistor parameters and improves linearity.\n\n## 3. Finite output resistance and terminal resistances\n\nIncluding the transistor’s small-signal output resistance \\(r_o\\),\n\\[\n\\boxed{\nA_v=\n-\\frac{g_mR_D}\n{1+g_mR_S+(R_S+R_D)/r_o}\n}.\n\\]\n\nNeglecting gate leakage and capacitances,\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty}.\n\\]\n\nWith the input ac-grounded, the output resistance is\n\\[\n\\boxed{\nR_{\\text{out}}\n=R_D\\parallel\\left[r_o(1+g_mR_S)+R_S\\right].\n}\n\\]\nFor \\(r_o\\to\\infty\\), \\(R_{\\text{out}}\\approx R_D\\).\n\n**Overall:** Increasing \\(V_{\\text{in}}\\) reduces the PMOS current, so \\(V_{\\text{out}}\\) decreases—the stage is inverting. Numerical results require the resistor values, supply, input bias, and transistor parameters.",
        "format": "markdown",
        "sha256": "49aa7d13ae8b64024713ad2103e611c6940c6d4885e1b17fafca6c56291906f3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the required inverting gain, \u0002−gmRD/(1+gmRS)\u0002. The additional operating-point and finite-ro analysis is consistent with the topology.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 4525,
        "total_tokens": 5951,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 4525,
        "total_tokens": 5951,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistor \\(M_1\\) is a **PMOS**, so this is an **inverting common-source amplifier with source degeneration** \\(R_S\\). The drain resistor \\(R_D\\) converts transistor current into output voltage.\n\nSince no values are specified, the analysis is symbolic. Assume negligible body effect.\n\n## 1. DC operating point\n\nDefine \\(I_D>0\\) as the current flowing downward from \\(V_{DD}\\) through \\(R_S\\), \\(M_1\\), and \\(R_D\\). Then\n\\[\nV_S=V_{DD}-I_DR_S,\\qquad V_{\\text{out}}=I_DR_D,\n\\]\nand\n\\[\nV_{SG}=V_{DD}-I_DR_S-V_{\\text{in}},\n\\qquad\nV_{SD}=V_{DD}-I_D(R_S+R_D).\n\\]\n\nFor a long-channel PMOS in saturation, neglecting channel-length modulation,\n\\[\n\\boxed{\nI_D=\\frac{\\beta_p}{2}\n\\left(V_{DD}-V_{\\text{in}}-I_DR_S-|V_{TP}|\\right)^2\n}\n\\]\nwhere \\(\\beta_p=\\mu_p C_{\\text{ox}}(W/L)\\). Solving this equation gives the bias current and hence \\(V_{\\text{out}}\\).\n\nThe saturation conditions are\n\\[\nV_{SG}>|V_{TP}|,\\qquad\nV_{SD}\\ge V_{SG}-|V_{TP}|.\n\\]\nThe second condition simplifies to\n\\[\n\\boxed{V_{\\text{out}}\\le V_{\\text{in}}+|V_{TP}|.}\n\\]\n\nIf\n\\[\nV_{\\text{in}}\\ge V_{DD}-|V_{TP}|,\n\\]\nthe transistor is off and \\(V_{\\text{out}}\\approx0\\). If it is on but the saturation condition fails, it operates in the triode region.\n\n## 2. Small-signal voltage gain\n\nAssume saturation and initially neglect the transistor’s output resistance \\(r_o\\). The ideal supply is AC ground, so\n\\[\nv_s=-i_dR_S,\\qquad v_{\\text{out}}=i_dR_D.\n\\]\nFor the PMOS,\n\\[\ni_d=g_m(v_s-v_{\\text{in}}).\n\\]\nSubstituting gives\n\\[\ni_d(1+g_mR_S)=-g_mv_{\\text{in}},\n\\]\nand therefore\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-\\frac{g_mR_D}{1+g_mR_S}\n=-\\frac{R_D}{R_S+1/g_m}\n}\n\\]\nwith\n\\[\ng_m=\\frac{2I_D}{V_{SG}-|V_{TP}|}.\n\\]\n\nUseful limits:\n- \\(R_S=0:\\quad A_v=-g_mR_D\\).\n- \\(g_mR_S\\gg1:\\quad A_v\\approx-R_D/R_S\\).\n\nThus, source degeneration reduces gain but makes it less sensitive to transistor parameters and improves linearity.\n\n## 3. Finite output resistance and impedances\n\nIncluding \\(r_o\\), while still neglecting body effect,\n\\[\n\\boxed{\nA_v=-\\frac{g_mR_D}\n{1+g_mR_S+(R_S+R_D)/r_o}\n}.\n\\]\n\nAt low frequencies, the ideal MOS gate draws no current:\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty.}\n\\]\n\nWith the input AC-grounded, the output resistance is\n\\[\n\\boxed{\nR_{\\text{out}}\n=R_D\\parallel\\left[r_o+(1+g_mr_o)R_S\\right].\n}\n\\]\nFor \\(r_o\\to\\infty\\), this becomes \\(R_{\\text{out}}\\approx R_D\\).\n\n**Overall behavior:** increasing \\(V_{\\text{in}}\\) reduces the PMOS current and therefore lowers \\(V_{\\text{out}}\\); the amplifier is inverting.",
        "format": "markdown",
        "sha256": "f23da29f44d29216eda5cbd28734489c77d127c647388a748223d9dc96722f90"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain \u001b[0m\\(-g_mR_D/(1+g_mR_S)\\). The additional analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 4492,
        "total_tokens": 5918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 4492,
        "total_tokens": 5918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS source follower**, also called a **common-drain amplifier**. The input drives the gate, the drain is connected to \\(V_{DD}\\), and the output is taken from the source.\n\nAssume an enhancement NMOS and initially neglect body effect and channel-length modulation.\n\n## 1. DC operating point\n\nThe circuit satisfies\n\\[\nV_{GS}=V_{\\text{in}}-V_{\\text{out}},\\qquad\nV_{DS}=V_{DD}-V_{\\text{out}},\\qquad\nI_D=\\frac{V_{\\text{out}}}{R_S}.\n\\]\n\n### Transistor off\nFor \\(V_{\\text{in}}\\le V_T\\), the ideal MOSFET is off:\n\\[\n\\boxed{I_D=0,\\qquad V_{\\text{out}}=0.}\n\\]\n\n### Transistor on and in saturation\nUsing the square-law model,\n\\[\nI_D=\\frac{\\beta}{2}(V_{GS}-V_T)^2,\n\\qquad\n\\beta=\\mu_n C_{\\text{ox}}\\frac WL.\n\\]\nTherefore,\n\\[\n\\boxed{\\frac{V_{\\text{out}}}{R_S}\n=\\frac{\\beta}{2}(V_{\\text{in}}-V_{\\text{out}}-V_T)^2.}\n\\]\n\nDefining \\(U=V_{\\text{in}}-V_T>0\\), the physical solution is\n\\[\n\\boxed{\nV_{\\text{out}}\n=U-\\frac{\\sqrt{1+2\\beta R_SU}-1}{\\beta R_S}.\n}\n\\]\n\nThus, the output follows the input but lies below it by\n\\[\nV_{GS}=V_T+V_{\\text{OV}}.\n\\]\nThe offset is **not exactly \\(V_T\\)**; the overdrive \\(V_{\\text{OV}}\\) is needed to supply current through \\(R_S\\).\n\nSaturation requires\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\quad\\Longrightarrow\\quad\n\\boxed{V_{\\text{in}}\\le V_{DD}+V_T.}\n\\]\nHence, for the usual input range \\(0\\le V_{\\text{in}}\\le V_{DD}\\), the transistor is in saturation whenever it is on. Above \\(V_{DD}+V_T\\), it enters triode.\n\n## 2. Small-signal voltage gain\n\nAt low frequencies, \\(V_{DD}\\) is AC ground. For small variations about an on-state bias point,\n\\[\n\\frac{v_{\\text{out}}}{R_S}\n=g_m(v_{\\text{in}}-v_{\\text{out}}).\n\\]\nConsequently,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_mR_S}{1+g_mR_S}.\n}\n\\]\n\nThe gain is positive and less than unity. When \\(g_mR_S\\gg1\\),\n\\[\nA_v\\approx1.\n\\]\n\nThis behavior results from negative feedback: a rise in source voltage reduces \\(V_{GS}\\), opposing the increase in drain current.\n\n## 3. Input and output resistance\n\nIgnoring gate leakage,\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty.}\n\\]\n\nWith the input held at AC ground, the resistance looking into the output is\n\\[\n\\boxed{\nR_{\\text{out}}\\approx R_S\\parallel\\frac1{g_m}\n=\\frac{R_S}{1+g_mR_S}.\n}\n\\]\n\nIf finite transistor output resistance \\(r_o\\) and body effect are included, with the bulk at AC ground,\n\\[\nA_v=\\frac{g_m}{g_m+g_{mb}+1/r_o+1/R_S},\n\\qquad\nR_{\\text{out}}=\\frac1{g_m+g_{mb}+1/r_o+1/R_S}.\n\\]\n\n**Overall:** this stage is a non-inverting voltage buffer with high input resistance, low output resistance, and voltage gain close to—but below—one. Numerical results require \\(V_{DD}\\), \\(R_S\\), \\(V_{\\text{in}}\\), and the transistor parameters.",
        "format": "markdown",
        "sha256": "6842862321148de6482aad32a9e683d7b541afe3926bfb9da62ccee1c3050a0b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, matching the golden solution. The additional analysis is consistent and supplementary.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 5041,
        "total_tokens": 6190,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 5041,
        "total_tokens": 6190,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS source follower**, also called a **common-drain amplifier**. The input is applied to the gate, and the output is taken from the source. It provides a noninverting voltage gain below unity, high input resistance, and relatively low output resistance.\n\nAssume an enhancement NMOS, no additional output load, and initially neglect body effect and channel-length modulation. Define\n\\[\n\\beta=\\mu_n C_{\\mathrm{ox}}\\frac WL.\n\\]\n\n## 1. DC operating point\n\nBecause the gate draws essentially no current,\n\\[\nI_D=\\frac{V_{\\text{out}}}{R_S},\n\\qquad\nV_{GS}=V_{\\text{in}}-V_{\\text{out}},\n\\qquad\nV_{DS}=V_{DD}-V_{\\text{out}}.\n\\]\n\n**Cutoff:** If \\(V_{\\text{in}}\\le V_T\\), the transistor is off, so\n\\[\n\\boxed{I_D\\approx0,\\qquad V_{\\text{out}}\\approx0.}\n\\]\n\n**On, in saturation:** The square-law model gives\n\\[\n\\boxed{\\frac{V_{\\text{out}}}{R_S}\n=\\frac{\\beta}{2}\\left(V_{\\text{in}}-V_{\\text{out}}-V_T\\right)^2.}\n\\]\n\nSolving for the physically valid output,\n\\[\nV_{\\text{out}}\n=V_{\\text{in}}-V_T\n-\\frac{\\sqrt{1+2\\beta R_S(V_{\\text{in}}-V_T)}-1}{\\beta R_S}.\n\\]\n\nThus the output is below the input by \\(V_{GS}=V_T+V_{\\text{OV}}\\), **not merely by \\(V_T\\)**.\n\nThe saturation condition is\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\quad\\Longrightarrow\\quad\n\\boxed{V_{\\text{in}}\\le V_{DD}+V_T.}\n\\]\nConsequently, for inputs between ground and \\(V_{DD}\\), the transistor is saturated whenever it is on. Above \\(V_{DD}+V_T\\), it enters the triode region and the saturation equation no longer applies.\n\n## 2. Small-signal voltage gain\n\nThe ideal supply \\(V_{DD}\\) is AC ground. Around a conducting bias point, the small-signal source current is\n\\[\ni_d=g_m(v_{\\text{in}}-v_{\\text{out}}).\n\\]\n\nApplying KCL at the source,\n\\[\n\\frac{v_{\\text{out}}}{R_S}\n=g_m(v_{\\text{in}}-v_{\\text{out}}),\n\\]\nso\n\\[\n\\boxed{A_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_mR_S}{1+g_mR_S}.}\n\\]\n\nThe gain is positive and less than one. For \\(g_mR_S\\gg1\\),\n\\[\nA_v\\approx1.\n\\]\n\nThe source voltage provides negative feedback: as it rises, \\(V_{GS}\\) decreases, opposing the increase in current.\n\n## 3. Input and output resistances\n\nAt low frequencies, neglecting gate leakage,\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty.}\n\\]\n\nWith the input AC-grounded, the output resistance is\n\\[\n\\boxed{R_{\\text{out}}\n=R_S\\parallel\\frac1{g_m}\n=\\frac{R_S}{1+g_mR_S}.}\n\\]\nFor \\(g_mR_S\\gg1\\), this approaches \\(1/g_m\\).\n\n### Including transistor nonidealities\n\nWith finite \\(r_o\\) and a body held at AC ground,\n\\[\n\\boxed{\nA_v=\\frac{g_m}{g_m+g_{mb}+1/r_o+1/R_S},\n\\qquad\nR_{\\text{out}}=\\frac{1}{g_m+g_{mb}+1/r_o+1/R_S}.\n}\n\\]\nOmit the \\(g_{mb}\\) contribution if the body is tied to the source.\n\n**Overall:** the stage is useful as a voltage buffer and DC level shifter, rather than as a voltage-gain stage.",
        "format": "markdown",
        "sha256": "986f0ef6ae5f669342bd90c05564f08b39a791620d6a86d232e1f46d741a4340"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain as gmRS/(1+gmRS). The additional operating-point and resistance analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 5848,
        "total_tokens": 6997,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4938,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 5848,
        "total_tokens": 6997,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4938,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS source follower**, also called a **common-drain amplifier**. The gate is the input, the source is the output, and the drain is connected to the fixed supply.\n\nAssume an enhancement-mode NMOS and initially neglect body effect and channel-length modulation. Define\n\\[\n\\beta=\\mu_n C_{\\mathrm{ox}}\\frac WL,\n\\]\nand let \\(V_T\\) be its threshold voltage.\n\n## 1. DC operating point\n\nBecause the gate draws negligible current,\n\\[\nI_D=\\frac{V_{\\text{out}}}{R_S},\\qquad\nV_{GS}=V_{\\text{in}}-V_{\\text{out}},\\qquad\nV_{DS}=V_{DD}-V_{\\text{out}}.\n\\]\n\n### Transistor off\nFor \\(V_{\\text{in}}\\le V_T\\), neglecting subthreshold conduction,\n\\[\n\\boxed{I_D\\approx0,\\qquad V_{\\text{out}}\\approx0.}\n\\]\n\n### Transistor on and saturated\nUsing the square-law model,\n\\[\n\\boxed{\\frac{V_{\\text{out}}}{R_S}\n=\\frac{\\beta}{2}\n\\left(V_{\\text{in}}-V_{\\text{out}}-V_T\\right)^2.}\n\\]\n\nThe physically valid solution is\n\\[\nV_{\\text{out}}\n=V_{\\text{in}}-V_T\n-\\frac{\\sqrt{1+2\\beta R_S(V_{\\text{in}}-V_T)}-1}{\\beta R_S}.\n\\]\n\nThus the output follows the input with a downward level shift:\n\\[\nV_{\\text{out}}=V_{\\text{in}}-V_{GS}.\n\\]\nImportantly, \\(V_{GS}=V_T+V_{\\text{OV}}\\), so the shift is **more than just the threshold voltage**.\n\nSaturation requires\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\quad\\Longrightarrow\\quad\n\\boxed{V_{\\text{in}}\\le V_{DD}+V_T.}\n\\]\nConsequently, for the usual input range \\(0\\le V_{\\text{in}}\\le V_{DD}\\), the transistor is either off or saturated. Above this saturation boundary, the triode-region model must be used.\n\n## 2. Small-signal voltage gain\n\nAround a saturated bias point, \\(V_{DD}\\) is AC ground. Let\n\\[\ng_m=\\beta(V_{GS}-V_T)=\\frac{2I_D}{V_{GS}-V_T}.\n\\]\n\nThe small-signal source-node equation is\n\\[\n\\frac{v_{\\text{out}}}{R_S}\n=g_m(v_{\\text{in}}-v_{\\text{out}}).\n\\]\n\nTherefore,\n\\[\n\\boxed{A_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_mR_S}{1+g_mR_S}.}\n\\]\n\nThe gain is **positive and less than unity**. When \\(g_mR_S\\gg1\\), it approaches unity.\n\nIncluding finite transistor output resistance \\(r_o\\) and body effect with the bulk at AC ground,\n\\[\n\\boxed{A_v=\n\\frac{g_m}{g_m+g_{mb}+1/r_o+1/R_S}.}\n\\]\nSet \\(g_{mb}=0\\) if body effect is neglected or the bulk is tied to the source.\n\n## 3. Input and output resistance\n\nAt low frequencies, the ideal MOS gate gives\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty.}\n\\]\n\nWith the input AC-grounded, the output resistance is\n\\[\n\\boxed{R_{\\text{out}}\n=\\left(g_m+g_{mb}+\\frac1{r_o}+\\frac1{R_S}\\right)^{-1}.}\n\\]\n\nNeglecting body effect and taking \\(r_o\\to\\infty\\),\n\\[\nR_{\\text{out}}\\approx \\frac1{g_m}\\parallel R_S.\n\\]\n\n**Overall:** the circuit is a noninverting voltage buffer with high input resistance, relatively low output resistance, and near-unity voltage gain. It requires a suitable DC input bias, and—with the input limited to \\(V_{DD}\\)—its output cannot reach the positive supply rail.",
        "format": "markdown",
        "sha256": "46ccc49e1695b1899247876c3c4e0079571349fc880bd0d49e3f74fadebb602a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain as gmRS/(1+gmRS), satisfying the golden solution’s full-credit rule. The additional analysis is consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 7288,
        "total_tokens": 8437,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 7288,
        "total_tokens": 8437,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS common-gate stage**:\n\n- Input: source of \\(M_1\\)\n- Output: drain of \\(M_1\\)\n- Gate: fixed at \\(V_{DD}\\), hence at **AC ground**\n\nIts behavior depends on the DC input voltage; saturation is not guaranteed.\n\n## 1. DC operation\n\nAssume an enhancement NMOS with threshold \\(V_T>0\\). Initially neglect body effect and channel-length modulation, and define\n\\[\n\\beta=\\mu_n C_{\\mathrm{ox}}\\frac WL.\n\\]\n\nThe circuit gives\n\\[\nV_{GS}=V_{DD}-V_{\\mathrm{in}},\\qquad\nV_{DS}=V_{\\mathrm{out}}-V_{\\mathrm{in}},\\qquad\nI_D=\\frac{V_{DD}-V_{\\mathrm{out}}}{R_D}.\n\\]\n\n### Cutoff\nIf\n\\[\nV_{\\mathrm{in}}\\ge V_{DD}-V_T,\n\\]\nthen \\(V_{GS}\\le V_T\\), so \\(I_D\\approx0\\) and\n\\[\n\\boxed{V_{\\mathrm{out}}\\approx V_{DD}}.\n\\]\n\n### Saturation\nFor an on transistor, the saturation condition is\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\quad\\Longrightarrow\\quad\n\\boxed{V_{\\mathrm{out}}\\ge V_{DD}-V_T}.\n\\]\n\nIn this region,\n\\[\nI_D=\\frac{\\beta}{2}(V_{DD}-V_{\\mathrm{in}}-V_T)^2,\n\\]\nso\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{DD}-\\frac{\\beta R_D}{2}\n(V_{DD}-V_{\\mathrm{in}}-V_T)^2\n}.\n\\]\n\nThis expression is valid only when \\(V_{\\mathrm{in}}<V_{DD}-V_T\\) and \\(I_D R_D\\le V_T\\). The saturation–triode boundary occurs at\n\\[\nV_{\\mathrm{in,b}}\n=V_{DD}-V_T-\\sqrt{\\frac{2V_T}{\\beta R_D}}.\n\\]\n\n### Triode region\nFor sufficiently low input voltage, the transistor enters triode:\n\\[\nV_{\\mathrm{in}}\\le V_{\\mathrm{out}}<V_{DD}-V_T.\n\\]\nThe output then follows the quadratic equation\n\\[\n\\frac{V_{DD}-V_{\\mathrm{out}}}{R_D}\n=\n\\beta\\left[\n(V_{DD}-V_{\\mathrm{in}}-V_T)(V_{\\mathrm{out}}-V_{\\mathrm{in}})\n-\\frac{(V_{\\mathrm{out}}-V_{\\mathrm{in}})^2}{2}\n\\right],\n\\]\nrather than the saturation expression above.\n\n## 2. Small-signal operation in saturation\n\nLet lowercase quantities denote small changes around a valid saturation bias point. Since the gate is AC-grounded,\n\\[\nv_{gs}=-v_{\\mathrm{in}},\n\\qquad\ni_d=g_m v_{gs}=-g_m v_{\\mathrm{in}}.\n\\]\n\nTherefore,\n\\[\nv_{\\mathrm{out}}=-R_D i_d\n=g_mR_Dv_{\\mathrm{in}},\n\\]\ngiving\n\\[\n\\boxed{A_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\\approx +g_mR_D},\n\\qquad\ng_m=\\beta(V_{DD}-V_{\\mathrm{in},Q}-V_T).\n\\]\n\nThe stage is **non-inverting**: increasing the source voltage reduces \\(V_{GS}\\), reducing drain current and the resistor’s voltage drop, so the output rises.\n\nNeglecting transistor output resistance,\n\\[\n\\boxed{R_{\\mathrm{in}}\\approx\\frac1{g_m}},\n\\qquad\n\\boxed{R_{\\mathrm{out}}\\approx R_D}.\n\\]\n\nIncluding finite \\(r_o\\), but still neglecting body effect,\n\\[\nA_v=\\left(g_m+\\frac1{r_o}\\right)(R_D\\parallel r_o),\n\\quad\nR_{\\mathrm{in}}=\\frac{R_D+r_o}{1+g_mr_o},\n\\quad\nR_{\\mathrm{out}}=R_D\\parallel r_o,\n\\]\nwhere output resistance is measured with the input voltage held fixed.\n\n**Key limitation:** tying the gate to \\(V_{DD}\\) restricts the saturation-region output to approximately\n\\[\nV_{DD}-V_T\\le V_{\\mathrm{out}}<V_{DD}.\n\\]\nThus, suitable DC bias is essential before applying the common-gate gain formula.",
        "format": "markdown",
        "sha256": "086b1a86f7eba0b9876c924a00c5244e2755ab375bfa43cec5b55cbe219037e3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate stage and gives the non-inverting gain and input resistance. The additional DC-region analysis and finite-\u001fr_o\u001f formulas are consistent with its stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 9794,
        "total_tokens": 10910,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 9794,
        "total_tokens": 10910,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit configuration\n\nThis is an **NMOS common-gate stage**:\n\n- The gate is fixed at \\(V_{DD}\\), so it is at AC ground.\n- \\(V_{\\text{in}}\\) is applied to the **source**.\n- \\(V_{\\text{out}}\\) is taken from the **drain**.\n\nAssume an enhancement-mode NMOS with threshold \\(V_T>0\\), neglecting body effect and channel-length modulation. Define\n\\[\n\\beta=\\mu_n C_{\\text{ox}}\\frac WL.\n\\]\n\nThe governing relations are\n\\[\nV_{GS}=V_{DD}-V_{\\text{in}},\\qquad\nV_{DS}=V_{\\text{out}}-V_{\\text{in}},\\qquad\nI_D=\\frac{V_{DD}-V_{\\text{out}}}{R_D}.\n\\]\n\n## 2. DC operating regions\n\n### Cutoff\n\nIf\n\\[\nV_{\\text{in}}\\ge V_{DD}-V_T,\n\\]\nthen \\(V_{GS}\\le V_T\\), so\n\\[\n\\boxed{I_D=0,\\qquad V_{\\text{out}}=V_{DD}.}\n\\]\n\n### Saturation\n\nLet the overdrive voltage be\n\\[\nV_{OV}=V_{DD}-V_{\\text{in}}-V_T>0.\n\\]\nIn saturation,\n\\[\nI_D=\\frac{\\beta}{2}V_{OV}^{2},\n\\]\ngiving\n\\[\n\\boxed{V_{\\text{out}}\n=V_{DD}-\\frac{\\beta R_D}{2}\n\\left(V_{DD}-V_{\\text{in}}-V_T\\right)^2.}\n\\]\n\nImportantly, saturation must be checked:\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\quad\\Longrightarrow\\quad\n\\boxed{V_{\\text{out}}\\ge V_{DD}-V_T.}\n\\]\nEquivalently,\n\\[\nI_DR_D\\le V_T.\n\\]\n\nThus, the saturation expression is valid for\n\\[\n0<V_{OV}\\le \\sqrt{\\frac{2V_T}{\\beta R_D}}.\n\\]\n\n### Triode\n\nIf \\(V_{\\text{out}}<V_{DD}-V_T\\) while the transistor is on, it operates in triode. The output then satisfies\n\\[\n\\boxed{\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n=\n\\beta\\left[\n(V_{DD}-V_{\\text{in}}-V_T)(V_{\\text{out}}-V_{\\text{in}})\n-\\frac{(V_{\\text{out}}-V_{\\text{in}})^2}{2}\n\\right].\n}\n\\]\nThe physical solution has\n\\[\nV_{\\text{in}}\\le V_{\\text{out}}<V_{DD}-V_T.\n\\]\n\n## 3. Small-signal behavior in saturation\n\nAround a saturation-region bias point,\n\\[\nv_{gs}=-v_{\\text{in}},\\qquad\ni_d=-g_m v_{\\text{in}},\n\\]\nwhere\n\\[\ng_m=\\beta V_{OV}=\\frac{2I_D}{V_{OV}}.\n\\]\nSince \\(v_{\\text{out}}=-R_Di_d\\),\n\\[\n\\boxed{A_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}=+g_mR_D.}\n\\]\n\nThe gain is **non-inverting**: raising the source voltage reduces \\(V_{GS}\\) and \\(I_D\\), reducing the resistor’s voltage drop and raising \\(V_{\\text{out}}\\).\n\nUnder the same ideal assumptions,\n\\[\n\\boxed{R_{\\text{in}}=\\frac{1}{g_m},\\qquad R_{\\text{out}}=R_D.}\n\\]\n\nIncluding finite transistor output resistance \\(r_o\\),\n\\[\nA_v=\\left(g_m+\\frac1{r_o}\\right)(R_D\\parallel r_o)\n\\approx g_m(R_D\\parallel r_o),\n\\]\nand \\(R_{\\text{out}}=R_D\\parallel r_o\\) with the input voltage held fixed.\n\n**Key limitation:** tying the gate to \\(V_{DD}\\) restricts the saturation-region output to\n\\[\n\\boxed{V_{DD}-V_T\\le V_{\\text{out}}<V_{DD}.}\n\\]\nConsequently, this common-gate amplifier has limited output-voltage headroom.",
        "format": "markdown",
        "sha256": "318a07d158364edd55e4fe788e18f413aee7757f25c2343573982bafee386beb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology and gives the non-inverting gain and approximately 1/gm input resistance. The additional DC-region and finite-ro analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 6749,
        "total_tokens": 7865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5788,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 6749,
        "total_tokens": 7865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5788,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit configuration\n\n\\(M_1\\) is an **NMOS common-gate stage**:\n\n- Gate: connected to \\(V_{DD}\\), hence at AC ground.\n- Source: receives \\(V_{\\text{in}}\\).\n- Drain: provides \\(V_{\\text{out}}\\), with load \\(R_D\\).\n\nWhen properly biased, it is a **non-inverting voltage amplifier with low input resistance**.\n\nAssume an enhancement NMOS with threshold \\(V_T>0\\), and define\n\\[\n\\beta=\\mu_n C_{\\text{ox}}\\frac WL.\n\\]\nInitially neglect body effect and channel-length modulation.\n\n## 2. DC operation\n\nThe terminal voltages and drain current satisfy\n\\[\nV_{GS}=V_{DD}-V_{\\text{in}},\\qquad\nV_{DS}=V_{\\text{out}}-V_{\\text{in}},\n\\]\n\\[\nI_D=\\frac{V_{DD}-V_{\\text{out}}}{R_D}.\n\\]\n\n### Saturation\nFor an on-state transistor in saturation,\n\\[\nI_D=\\frac{\\beta}{2}(V_{DD}-V_{\\text{in}}-V_T)^2,\n\\]\nso\n\\[\n\\boxed{\nV_{\\text{out}}\n=V_{DD}-\\frac{\\beta R_D}{2}\n(V_{DD}-V_{\\text{in}}-V_T)^2\n}.\n\\]\n\nThis expression is valid only when\n\\[\nV_{\\text{in}}<V_{DD}-V_T\n\\]\nand\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\quad\\Longrightarrow\\quad\n\\boxed{V_{\\text{out}}\\ge V_{DD}-V_T}.\n\\]\n\nEquivalently, the load voltage drop must satisfy\n\\[\n\\boxed{I_D R_D\\le V_T}.\n\\]\n\nThus, tying the gate to \\(V_{DD}\\) restricts the saturation-region output range to approximately\n\\[\nV_{DD}-V_T\\le V_{\\text{out}}\\le V_{DD}.\n\\]\n\n### Other operating regions\n\n- **Cutoff:** For \\(V_{\\text{in}}\\ge V_{DD}-V_T\\), within the normal supply range,\n  \\[\n  I_D\\approx0,\\qquad V_{\\text{out}}\\approx V_{DD}.\n  \\]\n\n- **Triode:** If the saturation calculation predicts \\(V_{\\text{out}}<V_{DD}-V_T\\), use\n  \\[\n  \\frac{V_{DD}-V_{\\text{out}}}{R_D}\n  =\n  \\beta\\left[\n  (V_{DD}-V_{\\text{in}}-V_T)(V_{\\text{out}}-V_{\\text{in}})\n  -\\frac{(V_{\\text{out}}-V_{\\text{in}})^2}{2}\n  \\right].\n  \\]\n\n## 3. Small-signal gain and resistances\n\nAround a saturation-region bias point, the gate voltage is constant, so\n\\[\nv_{gs}=-v_{\\text{in}},\\qquad\ni_d=-g_m v_{\\text{in}}.\n\\]\nSince \\(v_{\\text{out}}=-R_D i_d\\),\n\\[\n\\boxed{A_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}=+g_mR_D},\n\\]\nwhere\n\\[\ng_m=\\beta(V_{DD}-V_{\\text{in},Q}-V_T)\n=\\frac{2I_{D,Q}}{V_{\\text{OV},Q}}.\n\\]\n\nThe positive sign is intuitive: increasing the source voltage reduces \\(V_{GS}\\), reducing \\(I_D\\) and the drop across \\(R_D\\); therefore, the output voltage rises.\n\nIgnoring transistor output resistance,\n\\[\n\\boxed{R_{\\text{in}}\\approx\\frac1{g_m}},\\qquad\n\\boxed{R_{\\text{out}}\\approx R_D}.\n\\]\n\nIncluding finite \\(r_o\\), but still neglecting body effect,\n\\[\nA_v=\\frac{(1+g_mr_o)R_D}{R_D+r_o},\n\\qquad\nR_{\\text{in}}=\\frac{R_D+r_o}{1+g_mr_o},\n\\qquad\nR_{\\text{out}}=R_D\\parallel r_o,\n\\]\nwith the input held at AC ground when evaluating \\(R_{\\text{out}}\\).",
        "format": "markdown",
        "sha256": "8c675f8845619f52342348c4b9398cff0a0d3723d3cfa56ae19226ab38a283cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and gives the non-inverting gain and approximately 1/gm input resistance. The added DC-region and finite-ro analyses are consistent with the stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 7684,
        "total_tokens": 8800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 7684,
        "total_tokens": 8800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**As drawn, this circuit does not amplify \\(V_{\\text{in}}\\).** The source of \\(M_1\\), connected to the right side of \\(C_1\\), is wired directly to ground. Therefore, the input cannot change the source voltage.\n\n### 1. Signal behavior\nTaking \\(V_b\\) and \\(V_{DD}\\) as fixed DC supplies,\n\\[\nv_s=0,\\qquad v_g=0,\\qquad v_{gs}=0.\n\\]\nConsequently, there is no input-induced drain-current variation, and\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{v_{\\text{in}}}=0}.\n\\]\nHere, lowercase voltages denote small-signal variations; the **DC output voltage need not be zero**.\n\nThe input simply sees \\(C_1\\) connected to ground:\n\\[\nZ_{\\text{in}}(s)=\\frac{1}{sC_1},\n\\qquad\ni_{\\text{in}}=C_1\\frac{dv_{\\text{in}}}{dt}.\n\\]\nIgnoring transistor capacitances, the small-signal output resistance is\n\\[\nR_{\\text{out}}=R_D\\parallel r_o.\n\\]\n\n### 2. DC operating point\nAt DC, \\(C_1\\) is open, and\n\\[\nV_{GS}=V_b,\\qquad V_{DS}=V_{\\text{out},Q},\n\\qquad\nV_{\\text{out},Q}=V_{DD}-I_{D,Q}R_D.\n\\]\n\nFor an enhancement NMOS, neglecting channel-length modulation:\n\n- **Cutoff:** If \\(V_b\\le V_T\\),\n  \\[\n  I_{D,Q}\\approx0,\\qquad V_{\\text{out},Q}\\approx V_{DD}.\n  \\]\n\n- **Saturation:** If \\(V_b>V_T\\) and \\(V_{\\text{out},Q}\\ge V_b-V_T\\),\n  \\[\n  I_{D,Q}=\\frac{\\beta_n}{2}(V_b-V_T)^2,\n  \\]\n  \\[\n  \\boxed{V_{\\text{out},Q}\n  =V_{DD}-\\frac{\\beta_nR_D}{2}(V_b-V_T)^2},\n  \\qquad \\beta_n=\\mu_nC_{\\text{ox}}\\frac WL.\n  \\]\n\n- **Triode:** If \\(0\\le V_{\\text{out},Q}<V_b-V_T\\), determine the operating point from\n  \\[\n  \\frac{V_{DD}-V_{\\text{out},Q}}{R_D}\n  =\n  \\beta_n\\left[(V_b-V_T)V_{\\text{out},Q}\n  -\\frac{V_{\\text{out},Q}^{\\,2}}{2}\\right].\n  \\]\n\n### 3. Likely intended configuration\nThe arrangement resembles a **common-gate amplifier**, but the direct source-to-ground connection prevents that operation. For a functioning common-gate stage, the source needs a suitable bias path—such as a current source—with sufficiently high AC impedance so that \\(C_1\\) can apply the input signal to it.",
        "format": "markdown",
        "sha256": "895b1052bf815e8925b9961f67719e50c784990e010a0f5201c936b157d685fc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input cannot produce a source-voltage variation and the ideal small-signal gain is zero. The extra DC and impedance discussion does not undermine that conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 3787,
        "total_tokens": 5524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 3787,
        "total_tokens": 5524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**As drawn, this circuit does not amplify \\(V_{\\text{in}}\\).** The crucial detail is that the source of \\(M_1\\)—the node connected to the right side of \\(C_1\\)—is directly grounded. Consequently, \\(C_1\\) connects the input voltage source to ground, not to a signal-responsive transistor node.\n\n### 1. DC operating point\n\nAt DC, \\(C_1\\) is open, and\n\\[\nV_{GS}=V_b,\\qquad V_{DS}=V_{\\text{out},Q}.\n\\]\nThe drain resistor gives\n\\[\nV_{\\text{out},Q}=V_{DD}-I_{D,Q}R_D.\n\\]\n\nFor an enhancement NMOS, neglecting channel-length modulation:\n\n- **Cutoff:** If \\(V_b\\le V_T\\), then \\(I_{D,Q}\\approx0\\), so\n  \\[\n  V_{\\text{out},Q}\\approx V_{DD}.\n  \\]\n\n- **Saturation:** If \\(V_b>V_T\\),\n  \\[\n  I_{D,Q}=\\frac{\\beta}{2}(V_b-V_T)^2,\n  \\qquad\n  \\beta=\\mu_n C_{\\mathrm{ox}}\\frac WL,\n  \\]\n  provided the resulting output satisfies\n  \\[\n  V_{\\text{out},Q}\\ge V_b-V_T.\n  \\]\n\n- **Triode:** If that saturation condition fails, determine the bias using\n  \\[\n  I_{D,Q}=\\beta\\left[(V_b-V_T)V_{\\text{out},Q}\n  -\\frac{V_{\\text{out},Q}^{\\,2}}{2}\\right]\n  \\]\n  together with the resistor equation.\n\n### 2. Small-signal behavior\n\nAssuming \\(V_b\\) and \\(V_{DD}\\) are ideal DC supplies, the gate and source are both at small-signal ground:\n\\[\nv_g=0,\\qquad v_s=0\n\\quad\\Rightarrow\\quad v_{gs}=0.\n\\]\n\nThus the input produces no transistor-current modulation. Including the transistor’s output resistance \\(r_o\\), drain-node KCL gives\n\\[\n\\frac{v_{\\text{out}}}{R_D}\n+\\frac{v_{\\text{out}}}{r_o}\n+g_m v_{gs}=0.\n\\]\nTherefore,\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{v_{\\text{in}}}=0}.\n\\]\nThis means zero **signal gain**, not necessarily zero DC output voltage.\n\nNeglecting transistor parasitic capacitances,\n\\[\n\\boxed{Z_{\\text{in}}(s)=\\frac{1}{sC_1}},\n\\qquad\n\\boxed{R_{\\text{out}}=R_D\\parallel r_o}.\n\\]\nThe input merely supplies capacitor current \\(i_{\\text{in}}=C_1\\,dv_{\\text{in}}/dt\\).\n\n**If a common-gate amplifier was intended**, the direct source-to-ground connection must be replaced by a suitable bias path with high small-signal impedance, such as a current sink. Only then can the input vary the source voltage and produce amplification.",
        "format": "markdown",
        "sha256": "dc8e7e94d90c9c793fc0f6afbf60ba9eb9c1798f2f03f43a8a3051e522b559d5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M1’s source is hard-shorted to ground, so the input produces no small-signal source voltage or ideal gain. The extra bias and impedance discussion does not undermine the essential answer.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 3656,
        "total_tokens": 5393,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2970,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 3656,
        "total_tokens": 5393,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2970,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Key observation\n\n**As drawn, the circuit does not amplify \\(V_{\\text{in}}\\).** The source of \\(M_1\\) is connected directly to ground. Consequently, \\(C_1\\) connects the input voltage source to ground; it cannot produce a signal voltage at the transistor’s source.\n\n### 1. DC operating point\n\nAt DC, \\(C_1\\) is open, so\n\\[\nV_S=0,\\qquad V_{GS}=V_b,\\qquad\nV_{\\text{out},Q}=V_{DD}-I_{D,Q}R_D.\n\\]\n\nFor an NMOS, neglecting channel-length modulation and defining\n\\[\n\\beta=\\mu_n C_{\\text{ox}}\\frac WL,\n\\]\nthe operating region depends on the bias:\n\n- **Cutoff:** If \\(V_b\\le V_T\\),\n  \\[\n  I_{D,Q}\\approx0,\\qquad V_{\\text{out},Q}\\approx V_{DD}.\n  \\]\n\n- **Saturation:** If \\(V_b>V_T\\) and \\(V_{\\text{out},Q}\\ge V_b-V_T\\),\n  \\[\n  I_{D,Q}=\\frac{\\beta}{2}(V_b-V_T)^2,\n  \\]\n  hence\n  \\[\n  \\boxed{V_{\\text{out},Q}\n  =V_{DD}-\\frac{\\beta R_D}{2}(V_b-V_T)^2.}\n  \\]\n  The saturation condition must be checked after calculating this voltage.\n\n- **Triode:** If \\(0\\le V_{\\text{out},Q}<V_b-V_T\\), determine the output from\n  \\[\n  \\frac{V_{DD}-V_{\\text{out},Q}}{R_D}\n  =\\beta\\left[(V_b-V_T)V_{\\text{out},Q}\n  -\\frac{V_{\\text{out},Q}^2}{2}\\right].\n  \\]\n\n### 2. Small-signal behavior\n\nWith \\(V_b\\) and \\(V_{DD}\\) fixed, they are AC grounds. Since the source is also directly grounded,\n\\[\nv_g=0,\\qquad v_s=0,\\qquad v_{gs}=0.\n\\]\n\nThe input therefore does not modulate the drain current, giving\n\\[\n\\boxed{A_v(s)=\\frac{v_{\\text{out}}(s)}{v_{\\text{in}}(s)}=0.}\n\\]\nHere \\(v_{\\text{out}}\\) is the **small-signal variation**; the DC output voltage need not be zero.\n\nThe input merely drives the capacitor:\n\\[\ni_{\\text{in}}=C_1\\frac{dv_{\\text{in}}}{dt},\n\\qquad\n\\boxed{Z_{\\text{in}}(s)=\\frac{1}{sC_1}.}\n\\]\nThe small-signal output resistance is\n\\[\n\\boxed{R_{\\text{out}}=R_D\\parallel r_o.}\n\\]\n\n**If a common-gate amplifier was intended**, the direct source-to-ground connection must be replaced by a suitable DC-bias element, such as a current source with high AC impedance. Only then can the source voltage vary with the input.",
        "format": "markdown",
        "sha256": "7acafbb888ebcc73e64ce54fbe555b1e7480ed989260d92fb3a3dbbeeed35036"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that M1’s source is hard-shorted to ground, so the input cannot create a source signal and the ideal small-signal gain from Vin is zero. The additional bias and small-signal details are consistent with that conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 3807,
        "total_tokens": 5544,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 3807,
        "total_tokens": 5544,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\nOnly the **gate and drain voltages** are independent dynamic variables:\n- \\(C_{SB}\\) has both terminals grounded, so it has no effect.\n- \\(C_{GD}\\) couples the gate and drain; its voltage is \\(v_g-v_d\\), so it adds no independent state.\n\nThus, the small-signal transfer function is second order.",
        "format": "markdown",
        "sha256": "b5418eb033fe9ae016c769f12774729a8aea5547ba975374a7949f1066a1b996"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives two poles and justifies the count by noting that CSB is shorted because both terminals are grounded; CGD’s voltage is dependent on the gate and drain voltages.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 1122,
        "total_tokens": 3094,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 1122,
        "total_tokens": 3094,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\n- The **gate** and **drain/output** are the two independent dynamic nodes.\n- \\(C_{SB}\\) has both terminals grounded, so it has no effect.\n- \\(C_{GD}\\) does not introduce another independent state because its voltage is \\(v_g-v_d\\).\n\nThus, the transfer-function denominator is second order in \\(s\\).",
        "format": "markdown",
        "sha256": "37bdc6281d20a2cfbfff61a6d296b454b09cb067cc28b771f8dee7d7166c4340"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the capacitor count: CSB is shorted by grounding, and CGD’s voltage is determined by the gate and drain voltages rather than adding an independent state.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 1122,
        "total_tokens": 3094,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 1122,
        "total_tokens": 3094,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**.\n\nOnly two independent dynamic node voltages exist: the **gate** voltage and the **drain (output)** voltage.\n\n- \\(C_{GD}\\) couples these nodes but does not add an independent state, since its voltage is \\(v_g-v_d\\).\n- \\(C_{SB}\\) has both terminals grounded, so it has no effect.\n\nThus, the small-signal transfer function has a **second-order denominator**.",
        "format": "markdown",
        "sha256": "af349e9f6d59883b1df7b9bed672b215f4f3e337cdfa3152479149b0023e8027"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives two poles and accounts for the capacitors by noting that CSB is grounded at both terminals and contributes no state; the gate and drain provide the two independent dynamic voltages.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 849,
        "total_tokens": 2821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 748,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 849,
        "total_tokens": 2821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 748,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The signal is applied to the **source** of \\(M_1\\), and the output is taken at its drain. The divider feeds part of the output back to the gate, producing a **noninverting amplifier with negative voltage feedback**.\n\nAssume \\(M_1\\) is an NMOS biased in saturation. Initially neglect body effect, channel-length modulation, and capacitances.\n\nDefine\n\\[\n\\beta=\\frac{R_2}{R_1+R_2},\n\\qquad\nR=R_D\\parallel(R_1+R_2).\n\\]\nThe divider loads the output, so the effective drain load is \\(R\\), not simply \\(R_D\\).\n\n## 1. Feedback polarity\n\nSince the MOS gate draws negligible current,\n\\[\nv_f=\\beta v_{\\text{out}}.\n\\]\n\nIf \\(v_{\\text{out}}\\) increases while the input is held fixed, the gate voltage increases. This increases the drain current, pulling the output back down. Thus the feedback is **negative**.\n\nThe circuit samples output voltage and compares the input and feedback voltages through \\(v_{gs}\\), so it uses **voltage-series (series–shunt) feedback**.\n\n## 2. Small-signal voltage gain\n\nUsing lowercase symbols for small-signal quantities,\n\\[\nv_{gs}=v_f-v_{\\text{in}}\n      =\\beta v_{\\text{out}}-v_{\\text{in}}.\n\\]\n\nWith \\(V_{DD}\\) at AC ground, output-node KCL gives\n\\[\n\\frac{v_{\\text{out}}}{R}\n+g_m\\left(\\beta v_{\\text{out}}-v_{\\text{in}}\\right)=0.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_mR}{1+\\beta g_mR}\n}\n\\]\n\nThe gain is positive: increasing the source voltage reduces \\(v_{gs}\\), decreases drain current, and raises the output voltage.\n\nWriting the loop-gain magnitude as\n\\[\nT=\\beta g_mR,\n\\]\nwe obtain\n\\[\nA_v=\\frac{1}{\\beta}\\frac{T}{1+T}.\n\\]\n\nFor strong feedback, \\(T\\gg1\\),\n\\[\n\\boxed{\nA_v\\approx\\frac{1}{\\beta}\n=1+\\frac{R_1}{R_2}\n}\n\\]\nso the gain becomes approximately resistor-defined.\n\n## 3. Input and output resistances\n\nThe small-signal current entering the source terminal is\n\\[\ni_{\\text{in}}\n=g_m(v_{\\text{in}}-v_f)\n=\\frac{g_m}{1+T}v_{\\text{in}}.\n\\]\n\nHence\n\\[\n\\boxed{\nR_{\\text{in}}\n=\\frac{1+T}{g_m}\n=\\frac{1}{g_m}+\\beta R\n}\n\\]\n\nWith the input voltage held fixed—AC grounded—the output resistance is\n\\[\n\\boxed{\nR_{\\text{out}}\n=\\frac{R}{1+T}\n}\n\\]\n\nThus feedback increases the input resistance and decreases the output resistance. Nevertheless, the source input is **not** an infinite-impedance MOS gate input.\n\n## 4. DC operating point\n\nLet \\(V_I\\) and \\(V_O\\) denote the DC input and output voltages. Then\n\\[\nV_G=\\beta V_O,\\qquad\nV_{GS}=\\beta V_O-V_I.\n\\]\n\nThe DC current balance is\n\\[\n\\frac{V_{DD}-V_O}{R_D}\n=I_D+\\frac{V_O}{R_1+R_2}.\n\\]\n\nFor a long-channel square-law model,\n\\[\nI_D=\\frac{k_n}{2}\n\\left(\\beta V_O-V_I-V_T\\right)^2,\n\\qquad\nk_n=\\mu_nC_{\\text{ox}}\\frac WL,\n\\]\nprovided\n\\[\n\\beta V_O-V_I>V_T.\n\\]\n\nThese equations determine the bias point and therefore\n\\[\ng_m=k_n(V_{GS}-V_T).\n\\]\n\nSaturation also requires\n\\[\nV_O-V_I\\ge \\beta V_O-V_I-V_T.\n\\]\nFor the usual nonnegative output voltage and positive threshold, this is automatically satisfied once the transistor is on.\n\nIf \\(M_1\\) is off, the output is instead\n\\[\n\\boxed{\nV_{O,\\text{off}}\n=V_{DD}\\frac{R_1+R_2}{R_D+R_1+R_2}\n}\n\\]\nand the amplifier gain above does not apply.\n\nImportantly, \\(A_v\\approx1/\\beta\\) is an **incremental gain**. The DC voltages obey\n\\[\nV_O=\\frac{V_I+V_{GS}}{\\beta},\n\\]\nnot \\(V_O=V_I/\\beta\\).\n\n### Finite-\\(r_o\\) correction\n\nIncluding transistor output resistance while still neglecting body effect gives\n\\[\n\\boxed{\nA_v=\n\\frac{g_m+1/r_o}\n{1/R+1/r_o+\\beta g_m}\n}\n\\]\nwith\n\\[\nR_{\\text{out}}=\n\\frac{1}{1/R+1/r_o+\\beta g_m},\n\\qquad\nR_{\\text{in}}=\\frac{R}{A_v}.\n\\]",
        "format": "markdown",
        "sha256": "9931fe612e04b11bb9711122613590f61e9bd60c67efe295d8d37dccbb17f1e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, negative feedback, and the closed-loop gain. The additional secondary analysis does not contradict the essential result.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 9444,
        "total_tokens": 11043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 9444,
        "total_tokens": 11043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **non-inverting, source-driven NMOS amplifier with negative voltage feedback**. The divider \\(R_1,R_2\\) feeds part of the output voltage back to the gate.\n\nAssume low-frequency operation, with \\(M_1\\) biased in saturation. Initially neglect body effect and the transistor’s finite output resistance \\(r_o\\).\n\nDefine\n\\[\n\\beta=\\frac{R_2}{R_1+R_2},\n\\qquad\nR_L=R_D\\parallel(R_1+R_2).\n\\]\nThe divider loads the output, so the effective drain load is \\(R_L\\), not simply \\(R_D\\).\n\n## 1. Feedback and voltage gain\n\nBecause the MOS gate draws essentially no current,\n\\[\nV_F=\\beta V_{\\text{out}}.\n\\]\n\nAn increase in \\(V_{\\text{out}}\\) raises the gate voltage, increasing the drain current and pulling \\(V_{\\text{out}}\\) back down. Thus, the feedback is **negative**, specifically voltage-series (series–shunt) feedback.\n\nFor small signals, \\(V_{DD}\\) is AC ground and\n\\[\nv_{gs}=\\beta v_{\\text{out}}-v_{\\text{in}},\n\\qquad\ni_d=g_m(\\beta v_{\\text{out}}-v_{\\text{in}}).\n\\]\nKCL at the output gives\n\\[\n\\frac{v_{\\text{out}}}{R_L}\n+g_m(\\beta v_{\\text{out}}-v_{\\text{in}})=0.\n\\]\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_mR_L}{1+\\beta g_mR_L}\n}\n\\]\n\nThe loop-gain magnitude is\n\\[\nT=\\beta g_mR_L.\n\\]\nFor \\(T\\gg1\\),\n\\[\n\\boxed{\nA_v\\approx\\frac{1}{\\beta}\n=1+\\frac{R_1}{R_2}\n}\n\\]\nThus, sufficiently strong feedback makes the gain depend mainly on the resistor ratio rather than transistor parameters.\n\n## 2. Input and output resistances\n\nUnder the same assumptions,\n\\[\n\\boxed{\nR_{\\text{in}}\n=\\frac{1+T}{g_m}\n=\\frac{1}{g_m}+\\beta R_L\n}\n\\]\n\nWith the input voltage source set to zero—that is, the source AC-grounded—\n\\[\n\\boxed{\nR_{\\text{out}}=\\frac{R_L}{1+T}\n}\n\\]\n\nFeedback therefore increases the input resistance and decreases the output resistance. Nevertheless, the source input draws current; it is not a high-impedance MOS-gate input.\n\n## 3. DC operating point and limits\n\nThe DC bias satisfies\n\\[\nV_{GS}=\\beta V_{\\text{out}}-V_{\\text{in}},\n\\]\nand\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n=\nI_D+\\frac{V_{\\text{out}}}{R_1+R_2}.\n\\]\n\nUsing the saturation square-law model,\n\\[\nI_D=\\frac{k_n}{2}\n\\left(\\beta V_{\\text{out}}-V_{\\text{in}}-V_T\\right)^2,\n\\qquad\nk_n=\\mu_nC_{\\text{ox}}\\frac WL.\n\\]\nThese equations determine the bias point and hence \\(g_m\\).\n\nConduction requires\n\\[\n\\beta V_{\\text{out}}-V_{\\text{in}}>V_T.\n\\]\nFor positive output voltage and an enhancement NMOS, \\(V_D\\ge V_G\\), so a conducting transistor satisfies the saturation condition.\n\nIf \\(M_1\\) turns off, the output becomes\n\\[\nV_{\\text{out,off}}\n=\nV_{DD}\\frac{R_1+R_2}{R_D+R_1+R_2}.\n\\]\n\nImportantly, \\(A_v\\approx1+R_1/R_2\\) is an **incremental gain**, not a zero-offset DC relationship. At DC,\n\\[\nV_{\\text{out}}=\\frac{V_{\\text{in}}+V_{GS}}{\\beta}.\n\\]\n\n### Including finite \\(r_o\\)\n\nIf channel-length modulation matters, while still neglecting body effect, the small-signal gain is\n\\[\n\\boxed{\nA_v=\n\\frac{g_m+1/r_o}\n{1/R_L+1/r_o+\\beta g_m}\n}\n\\]\nwhich reduces to the earlier expression as \\(r_o\\to\\infty\\).",
        "format": "markdown",
        "sha256": "2e7e58ca65423c8e8eabbbb23741a6338f001d6d8b442aa5b64de88d26de6ab4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain. The additional analyses do not contradict the essential model.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 11086,
        "total_tokens": 12685,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 11086,
        "total_tokens": 12685,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **source-driven, noninverting NMOS amplifier with negative voltage feedback**. With no component values specified, its behavior can be found symbolically.\n\nAssume low-frequency operation, negligible gate current, and \\(M_1\\) biased in saturation. Initially neglect body effect and the transistor’s output conductance.\n\n## 1. Feedback action and loading\n\nThe divider sets\n\\[\nV_F=\\beta V_{\\text{out}},\n\\qquad\n\\beta=\\frac{R_2}{R_1+R_2}.\n\\]\n\nIt also loads the output, so define\n\\[\nR=R_D\\parallel(R_1+R_2).\n\\]\n\nThe feedback is **negative**: an increase in \\(V_{\\text{out}}\\) raises \\(V_F\\), increasing the NMOS drain current and pulling \\(V_{\\text{out}}\\) back down.\n\nThe input is applied at the source. Increasing \\(V_{\\text{in}}\\) initially reduces \\(V_{GS}\\) and the drain current, causing \\(V_{\\text{out}}\\) to increase. Thus, the signal gain is positive. This is voltage feedback with series input mixing and shunt output sampling.\n\n## 2. Small-signal voltage gain\n\nUsing lowercase letters for small-signal quantities,\n\\[\nv_{gs}=v_f-v_{\\text{in}}\n=\\beta v_{\\text{out}}-v_{\\text{in}}.\n\\]\n\nSince \\(V_{DD}\\) is AC ground, output-node KCL gives\n\\[\n\\frac{v_{\\text{out}}}{R}\n+g_m\\left(\\beta v_{\\text{out}}-v_{\\text{in}}\\right)=0.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_mR}{1+\\beta g_mR}\n}\n\\]\n\nEquivalently, with forward gain \\(A_0=g_mR\\) and loop-gain magnitude \\(T=\\beta g_mR\\),\n\\[\nA_v=\\frac{A_0}{1+T}.\n\\]\n\nFor strong feedback, \\(T\\gg1\\),\n\\[\n\\boxed{\nA_v\\approx\\frac{1}{\\beta}\n=1+\\frac{R_1}{R_2}\n}\n\\]\n\nThis is an **incremental gain about the bias point**, not a zero-offset DC relationship.\n\n## 3. Input and output resistances\n\nThe small-signal current entering the source terminal is\n\\[\ni_{\\text{in}}\n=g_m(v_{\\text{in}}-v_f)\n=\\frac{g_m}{1+T}v_{\\text{in}}.\n\\]\n\nHence,\n\\[\n\\boxed{\nR_{\\text{in}}=\\frac{1+T}{g_m}\n=\\frac{1}{g_m}+\\beta R\n}\n\\]\n\nWith the input voltage source AC-grounded, the resistance looking into the output is\n\\[\n\\boxed{\nR_{\\text{out}}=\\frac{R}{1+T}\n}\n\\]\n\nThus, feedback increases the source-port input resistance and decreases the output resistance.\n\n## 4. DC operating point\n\nThe gate voltage and transistor voltages are\n\\[\nV_{GS}=\\beta V_{\\text{out}}-V_{\\text{in}},\n\\qquad\nV_{DS}=V_{\\text{out}}-V_{\\text{in}}.\n\\]\n\nThe output-node DC equation is\n\\[\n\\boxed{\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n=\nI_D+\\frac{V_{\\text{out}}}{R_1+R_2}\n}\n\\]\n\nFor a long-channel NMOS in saturation, neglecting channel-length modulation,\n\\[\nI_D=\\frac{K_n}{2}\n\\left(\\beta V_{\\text{out}}-V_{\\text{in}}-V_T\\right)^2,\n\\qquad\nK_n=\\mu_nC_{\\text{ox}}\\frac WL.\n\\]\n\nThese equations determine the bias point, provided\n\\[\n\\beta V_{\\text{out}}-V_{\\text{in}}>V_T.\n\\]\n\nFor positive \\(V_{\\text{out}}\\), an on transistor is normally in saturation because \\(V_G=\\beta V_D\\le V_D\\).\n\nIf the transistor cuts off, the output is set by the passive resistor network:\n\\[\n\\boxed{\nV_{\\text{out,off}}\n=V_{DD}\\frac{R_1+R_2}{R_D+R_1+R_2}\n}\n\\]\n—not exactly \\(V_{DD}\\), because the feedback divider draws current.\n\n### Finite transistor output resistance\n\nIncluding \\(r_o\\), but still neglecting body effect, gives\n\\[\n\\boxed{\nA_v=\n\\frac{g_m+1/r_o}\n{1/R+1/r_o+\\beta g_m}\n}\n\\]\nIf the bulk is AC-grounded and body effect is included, add \\(g_{mb}\\) to the numerator.",
        "format": "markdown",
        "sha256": "019f829ca445ecd2bf3a4ec253e1bafbd9979714a4f35456ef40ded40ed89489"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain. The additional analyses do not undermine the essential result.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 9502,
        "total_tokens": 11101,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8433,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 9502,
        "total_tokens": 11101,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8433,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS source follower (common-drain amplifier)**, with \\(M_2\\) acting as a bias-current sink. It provides a non-inverting voltage gain close to unity, high input resistance, and low output resistance.\n\nAssume \\(V_{DD}\\) and \\(V_b\\) are fixed, both transistors operate in saturation, and there is no external output load.\n\n## 1. DC operating point\n\nDefine\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}\\left(\\frac WL\\right)_i.\n\\]\n\nNeglecting channel-length modulation and body effect, \\(M_2\\) sets the current:\n\\[\nI_B=I_{D1}=I_{D2}\n=\\frac{\\beta_2}{2}(V_b-V_{T2})^2,\n\\qquad V_b>V_{T2}.\n\\]\n\nFor \\(M_1\\),\n\\[\nI_B=\\frac{\\beta_1}{2}(V_{\\mathrm{in}}-V_{\\mathrm{out}}-V_{T1})^2.\n\\]\n\nConsequently,\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{\\mathrm{in}}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{T2})\n}\n\\]\n\nThus the output follows the input with a downward DC level shift of \\(V_{GS1}\\). For matched transistors with equal thresholds, this simplifies to\n\\[\nV_{\\mathrm{out}}\\approx V_{\\mathrm{in}}-V_b.\n\\]\nBody effect in \\(M_1\\), if present, makes its threshold depend on the output voltage, modifying this relation.\n\n## 2. Small-signal voltage gain\n\nAt low frequencies, \\(V_{DD}\\) and \\(V_b\\) are AC ground. Because \\(M_2\\)'s gate and source voltages are fixed, its small-signal contribution at the output is just \\(r_{o2}\\).\n\nIncluding output resistances and body effect in \\(M_1\\), output-node KCL gives\n\\[\ng_{m1}(v_{\\mathrm{in}}-v_{\\mathrm{out}})\n=\n\\left(g_{mb1}+\\frac1{r_{o1}}+\\frac1{r_{o2}}\\right)v_{\\mathrm{out}}.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+1/r_{o1}+1/r_{o2}}\n}\n\\]\n\nHere \\(g_{mb1}\\) is the body-effect transconductance; set it to zero if \\(M_1\\)'s body is tied to its source.\n\nWithout body effect,\n\\[\nA_v=\\frac{g_{m1}(r_{o1}\\parallel r_{o2})}\n{1+g_{m1}(r_{o1}\\parallel r_{o2})}\n\\approx 1.\n\\]\n\nWith body effect and large output resistances,\n\\[\nA_v\\approx\\frac{g_{m1}}{g_{m1}+g_{mb1}}<1.\n\\]\n\n## 3. Input and output resistances\n\nNeglecting gate leakage and capacitances,\n\\[\n\\boxed{R_{\\mathrm{in}}\\approx\\infty.}\n\\]\n\nWith the input held at AC ground,\n\\[\n\\boxed{\nR_{\\mathrm{out}}\n=\\frac{1}{g_{m1}+g_{mb1}+1/r_{o1}+1/r_{o2}}\n\\approx\\frac{1}{g_{m1}+g_{mb1}}.\n}\n\\]\n\nAn external load \\(R_L\\) adds \\(1/R_L\\) to the voltage-gain denominator.\n\n## 4. Operating range\n\nWriting \\(V_{\\mathrm{OV}i}=V_{GSi}-V_{Ti}\\), saturation requires\n\\[\n\\boxed{\nV_{\\mathrm{OV2}}\\le V_{\\mathrm{out}}\n\\le V_{DD}-V_{\\mathrm{OV1}}.\n}\n\\]\n\nBelow the lower limit, \\(M_2\\) enters triode and no longer behaves as a good current sink. Above the upper limit, \\(M_1\\) enters triode.\n\nThe available input voltage may impose a stricter upper limit: if \\(V_{\\mathrm{in}}\\le V_{DD}\\),\n\\[\nV_{\\mathrm{out,max}}\\approx V_{DD}-V_{T1}-V_{\\mathrm{OV1}}.\n\\]\n\n**Overall:** this stage is a voltage buffer and level shifter, rather than a high-voltage-gain amplifier.",
        "format": "markdown",
        "sha256": "61081b3f140c9d5e09118e330551d14cf8c5afd3d73884c4f34308e3b9ed1d9d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as the current sink, with positive gain slightly below unity. The small-signal gain and output-resistance expressions appropriately include body effect and finite output resistances.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 4109,
        "total_tokens": 5333,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 4109,
        "total_tokens": 5333,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower (common-drain amplifier)** with an active current-sink load:\n\n- \\(M_1\\) buffers the input; its source is the output.\n- \\(M_2\\) sets the bias current through the fixed gate voltage \\(V_b\\).\n\nAssume no external DC load and that both transistors operate in saturation.\n\n## 1. DC operating point\n\nFor a first approximation, neglect body effect and channel-length modulation. Define\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}(W/L)_i.\n\\]\n\nProvided \\(V_b>V_{T2}\\), the bias current is\n\\[\nI_Q=I_{D1}=I_{D2}\n=\\frac{\\beta_2}{2}(V_b-V_{T2})^2.\n\\]\n\nThe gate-source voltage required by \\(M_1\\) is\n\\[\nV_{GS1}=V_{T1}+\\sqrt{\\frac{2I_Q}{\\beta_1}}.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{\\mathrm{in}}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{T2})\n}\n\\]\n\nThus, the output follows the input with a downward DC level shift. For ideally matched devices, under these assumptions,\n\\[\n\\boxed{V_{\\mathrm{out}}=V_{\\mathrm{in}}-V_b.}\n\\]\n\nIf \\(M_1\\)'s bulk is grounded, body effect makes \\(V_{T1}\\) increase with \\(V_{\\mathrm{out}}\\), modifying this relation.\n\n## 2. Small-signal voltage gain\n\nTake \\(V_{DD}\\) and \\(V_b\\) as AC grounds. Since \\(M_2\\)'s gate and source are both at AC ground, it contributes its output resistance \\(r_{o2}\\), but no signal-dependent \\(g_{m2}v_{gs2}\\) current.\n\nIncluding output resistances and the body effect of \\(M_1\\), output-node KCL gives\n\\[\ng_{m1}(v_{\\mathrm{in}}-v_{\\mathrm{out}})\n-g_{mb1}v_{\\mathrm{out}}\n=\n\\left(\\frac1{r_{o1}}+\\frac1{r_{o2}}\\right)v_{\\mathrm{out}}.\n\\]\n\nHence,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+1/r_{o1}+1/r_{o2}}\n}\n\\]\n\nThe gain is **positive and normally slightly below unity**:\n\n- Neglecting body effect and taking \\(r_{o1},r_{o2}\\to\\infty\\): \\(A_v\\to1\\).\n- With body effect but large output resistances:\n  \\[\n  A_v\\approx\\frac{g_{m1}}{g_{m1}+g_{mb1}}<1.\n  \\]\n\nSet \\(g_{mb1}=0\\) if \\(M_1\\)'s bulk is tied to its source.\n\n## 3. Input and output resistances\n\nAt low frequencies, neglecting gate leakage,\n\\[\n\\boxed{R_{\\mathrm{in}}\\approx\\infty.}\n\\]\n\nWith the input held fixed, the output resistance is\n\\[\n\\boxed{\nR_{\\mathrm{out}}\n=\n\\frac{1}\n{g_{m1}+g_{mb1}+1/r_{o1}+1/r_{o2}}\n\\approx\\frac{1}{g_{m1}+g_{mb1}}.\n}\n\\]\n\nAn external load \\(R_L\\) adds \\(1/R_L\\) to the voltage-gain denominator.\n\n## 4. Operating limits\n\nDefine\n\\[\nV_{\\mathrm{OV1}}=V_{GS1}-V_{T1},\n\\qquad\nV_{\\mathrm{OV2}}=V_b-V_{T2}.\n\\]\n\nFor both devices to remain saturated,\n\\[\nM_2:\\quad V_{\\mathrm{out}}\\ge V_{\\mathrm{OV2}},\n\\]\n\\[\nM_1:\\quad V_{DD}-V_{\\mathrm{out}}\\ge V_{\\mathrm{OV1}}.\n\\]\n\nThus, the saturation headroom conditions are\n\\[\n\\boxed{\nV_{\\mathrm{OV2}}\\le V_{\\mathrm{out}}\n\\le V_{DD}-V_{\\mathrm{OV1}}.\n}\n\\]\n\nIf \\(V_{\\mathrm{in}}\\le V_{DD}\\), the upper output limit is more restrictive: approximately \\(V_{DD}-V_{GS1}\\).\n\n**Overall:** this is a non-inverting, near-unity-gain voltage buffer with high input resistance, low output resistance, and a DC level shift—not a rail-to-rail follower.",
        "format": "markdown",
        "sha256": "5b6dab799f2edfa7cfd0544eef9ac91ab232943c24c3827a3d63760e43d20060"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as the current-sink load, and gives the positive, near-unity gain with appropriate body-effect and output-resistance refinements. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 5188,
        "total_tokens": 6412,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 5188,
        "total_tokens": 6412,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower (common-drain amplifier)**. \\(M_1\\) buffers the input voltage, while \\(M_2\\) acts as a bias-current sink.\n\n## 1. DC operating point\n\nAssume the output is unloaded, both transistors are in saturation, and initially neglect body effect and channel-length modulation. Define\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}(W/L)_i.\n\\]\n\nThe bias voltage sets the current through \\(M_2\\):\n\\[\nI_B=I_{D2}=\\frac{\\beta_2}{2}(V_b-V_{T2})^2,\n\\qquad V_b>V_{T2}.\n\\]\n\nSince \\(I_{D1}=I_{D2}=I_B\\), the required gate–source voltage of \\(M_1\\) is\n\\[\nV_{GS1}=V_{T1}+\\sqrt{\\frac{2I_B}{\\beta_1}}.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{\\mathrm{in}}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}(V_b-V_{T2})\n}\n\\]\n\nThus, the output follows the input with a downward DC level shift of approximately \\(V_{GS1}\\). For matched devices under these assumptions,\n\\[\nV_{\\mathrm{out}}\\approx V_{\\mathrm{in}}-V_b.\n\\]\n\n## 2. Low-frequency small-signal behavior\n\nTreat \\(V_{DD}\\) and \\(V_b\\) as AC ground. Let \\(r_{o1}\\) and \\(r_{o2}\\) be the transistors’ small-signal output resistances.\n\nBecause \\(M_2\\)'s gate and source are fixed, \\(v_{gs2}=0\\); hence it contributes \\(r_{o2}\\), but no \\(g_{m2}v_{gs2}\\) current.\n\nIncluding \\(M_1\\)'s body effect, output-node KCL gives\n\\[\ng_{m1}(v_{\\mathrm{in}}-v_{\\mathrm{out}})\n=\n\\left(g_{mb1}+\\frac1{r_{o1}}+\\frac1{r_{o2}}\\right)v_{\\mathrm{out}}.\n\\]\n\nConsequently,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+1/r_{o1}+1/r_{o2}}\n}\n\\]\n\nHere \\(g_{mb1}\\) applies when \\(M_1\\)'s bulk is AC-grounded; omit it if the bulk is tied to its source.\n\n- The gain is **positive and less than unity** for finite output resistances.\n- With large \\(r_o\\),\n  \\[\n  A_v\\approx\\frac{g_{m1}}{g_{m1}+g_{mb1}}.\n  \\]\n- Neglecting both body effect and channel-length modulation gives \\(A_v=1\\).\n\nThe low-frequency input resistance is ideally\n\\[\n\\boxed{R_{\\mathrm{in}}\\rightarrow\\infty}.\n\\]\n\nWith the input AC-grounded, the output resistance is\n\\[\n\\boxed{\nR_{\\mathrm{out}}\n=\\frac{1}{g_{m1}+g_{mb1}+1/r_{o1}+1/r_{o2}}\n\\approx\\frac{1}{g_{m1}+g_{mb1}}.\n}\n\\]\n\n## 3. Operating range\n\nLet \\(V_{\\mathrm{OV}i}=V_{GSi}-V_{Ti}\\). Saturation requires\n\\[\nM_2:\\quad V_{\\mathrm{out}}\\ge V_{\\mathrm{OV}2}=V_b-V_{T2},\n\\]\n\\[\nM_1:\\quad V_{DD}-V_{\\mathrm{out}}\\ge V_{\\mathrm{OV}1}.\n\\]\n\nThus, the saturation headroom limits are\n\\[\n\\boxed{\nV_{\\mathrm{OV}2}\\le V_{\\mathrm{out}}\n\\le V_{DD}-V_{\\mathrm{OV}1}.\n}\n\\]\n\nIf \\(V_{\\mathrm{in}}\\) cannot exceed \\(V_{DD}\\), the upper output is further limited to approximately \\(V_{DD}-V_{GS1}\\). Below the lower headroom limit, \\(M_2\\) enters triode and no longer behaves as a constant-current sink.\n\n**Overall:** this is a noninverting voltage buffer with high input resistance, low output resistance, and a DC level shift—not a voltage-gain stage.",
        "format": "markdown",
        "sha256": "edaea8e231ed473c09e6e15c1afb96286bcc09ba01c2e75587f04af490a7bbe1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as the current sink, and gives the positive, sub-unity gain with the appropriate body-effect and output-resistance terms. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 8984,
        "total_tokens": 10208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7990,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 8984,
        "total_tokens": 10208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7990,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter**:\n\n- \\(M_1\\): NMOS pull-down transistor, connecting the output to ground.\n- \\(M_2\\): PMOS pull-up transistor, connecting the output to \\(V_{DD}\\).\n- Their gates share \\(V_{\\text{in}}\\), and their drains share \\(V_{\\text{out}}\\).\n\n## 1. DC operation\n\nLet the threshold voltages be \\(V_{Tn}>0\\) and \\(V_{Tp}<0\\). The gate-to-source voltages are\n\\[\nV_{GS1}=V_{\\text{in}},\\qquad V_{SG2}=V_{DD}-V_{\\text{in}}.\n\\]\n\nThus:\n- \\(M_1\\) conducts when \\(V_{\\text{in}}>V_{Tn}\\).\n- \\(M_2\\) conducts when \\(V_{\\text{in}}<V_{DD}-|V_{Tp}|\\).\n\nAssuming a normal supply, \\(V_{DD}>V_{Tn}+|V_{Tp}|\\), and no DC output load:\n\n| Input voltage | \\(M_1\\) (NMOS) | \\(M_2\\) (PMOS) | Output |\n|---|---|---|---|\n| \\(V_{\\text{in}}\\le V_{Tn}\\) | OFF | ON | \\(V_{\\text{out}}\\approx V_{DD}\\) |\n| \\(V_{Tn}<V_{\\text{in}}<V_{DD}-|V_{Tp}|\\) | ON | ON | Transition from high to low |\n| \\(V_{\\text{in}}\\ge V_{DD}-|V_{Tp}|\\) | ON | OFF | \\(V_{\\text{out}}\\approx 0\\) |\n\nTherefore, at logic levels,\n\\[\n\\boxed{\\text{LOW input}\\rightarrow\\text{HIGH output},\\qquad\n\\text{HIGH input}\\rightarrow\\text{LOW output}.}\n\\]\n\nA rising input turns on \\(M_1\\) and turns off \\(M_2\\), discharging the output capacitance. A falling input does the opposite.\n\n## 2. Switching voltage\n\nDefine the inverter switching voltage \\(V_M\\) by\n\\[\nV_{\\text{in}}=V_{\\text{out}}=V_M.\n\\]\n\nAt this point both transistors are in saturation. Using the long-channel square-law model and neglecting channel-length modulation, equality of their current magnitudes gives\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{Tn})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{Tp}|)^2,\n\\]\nwhere\n\\[\n\\beta_n=\\mu_n C_{\\text{ox}}(W/L)_1,\\qquad\n\\beta_p=\\mu_p C_{\\text{ox}}(W/L)_2.\n\\]\n\nSolving,\n\\[\n\\boxed{\nV_M=\n\\frac{\\sqrt{\\beta_n}V_{Tn}\n+\\sqrt{\\beta_p}(V_{DD}-|V_{Tp}|)}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n}.\n\\]\n\nFor matched strengths, \\(\\beta_n=\\beta_p\\), and equal threshold magnitudes,\n\\[\n\\boxed{V_M=\\frac{V_{DD}}{2}}.\n\\]\n\n## 3. Gain and power\n\nNear the switching point, the circuit can act as a high-gain **inverting amplifier**. With both devices saturated and finite output resistances,\n\\[\n\\boxed{\nA_v\\approx-(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2})\n}\n\\]\nfor an unloaded output. The input resistance is ideally infinite because the input drives insulated gates.\n\nAt either valid logic state, one transistor is off, so the ideal static supply current is zero; real devices have leakage. If the input is held in the transition region, both devices conduct and static power is consumed.\n\nFor a capacitive load \\(C_L\\), switching also consumes approximately\n\\[\nP_{\\text{dyn}}=\\alpha C_LV_{DD}^{2}f,\n\\]\nwhere \\(\\alpha f\\) is the rate of output \\(0\\rightarrow1\\) transitions. Additional short-circuit power occurs while both transistors are on during switching.",
        "format": "markdown",
        "sha256": "cf674de873c5028b1f9b415ceaa2809b23cbec47f373b1fb85719e614fb027be"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up sharing input and output nodes. The additional DC, switching, and gain analysis is consistent with inverter operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 4499,
        "total_tokens": 4779,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 4499,
        "total_tokens": 4779,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **CMOS inverter (NOT gate)**:\n\n- \\(M_1\\) is an **nMOS pull-down** transistor connected to ground.\n- \\(M_2\\) is a **pMOS pull-up** transistor connected to \\(V_{DD}\\).\n- Their gates share \\(V_{\\text{in}}\\), and their drains share \\(V_{\\text{out}}\\).\n\n## 1. DC operation\n\nLet \\(V_{Tn}>0\\) and \\(|V_{Tp}|>0\\) denote the threshold-voltage magnitudes.\n\nFor the nMOS,\n\\[\nV_{GS1}=V_{\\text{in}},\n\\qquad M_1\\text{ turns on when }V_{\\text{in}}>V_{Tn}.\n\\]\n\nFor the pMOS,\n\\[\nV_{SG2}=V_{DD}-V_{\\text{in}},\n\\qquad M_2\\text{ turns on when }V_{\\text{in}}<V_{DD}-|V_{Tp}|.\n\\]\n\nAssuming a normal supply voltage and negligible DC output loading:\n\n| Input | \\(M_1\\), nMOS | \\(M_2\\), pMOS | Output |\n|---|---|---|---|\n| \\(V_{\\text{in}}=0\\) | OFF | ON | \\(V_{\\text{out}}\\approx V_{DD}\\), logic 1 |\n| \\(V_{\\text{in}}=V_{DD}\\) | ON | OFF | \\(V_{\\text{out}}\\approx0\\), logic 0 |\n\nThus, in logic notation,\n\\[\n\\boxed{V_{\\text{out}}=\\operatorname{NOT}(V_{\\text{in}})}.\n\\]\n\nFor intermediate inputs,\n\\[\nV_{Tn}<V_{\\text{in}}<V_{DD}-|V_{Tp}|,\n\\]\nboth transistors conduct. The output is determined by the current balance\n\\[\nI_{Dn}=|I_{Dp}|,\n\\]\nand falls steeply as the input increases.\n\n## 2. Switching voltage\n\nDefine the switching voltage \\(V_M\\) by\n\\[\nV_{\\text{in}}=V_{\\text{out}}=V_M.\n\\]\n\nUsing the long-channel square-law model and neglecting channel-length modulation, both devices are saturated at this point:\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{Tn})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{Tp}|)^2,\n\\]\nwhere\n\\[\n\\beta_n=\\mu_n C_{\\text{ox}}\\frac{W_n}{L_n},\n\\qquad\n\\beta_p=\\mu_p C_{\\text{ox}}\\frac{W_p}{L_p}.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nV_M=\n\\frac{\\sqrt{\\beta_p}(V_{DD}-|V_{Tp}|)\n+\\sqrt{\\beta_n}V_{Tn}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n}.\n\\]\n\nFor matched strengths, \\(\\beta_n=\\beta_p\\), and equal threshold magnitudes,\n\\[\n\\boxed{V_M=\\frac{V_{DD}}{2}}.\n\\]\n\n## 3. Key characteristics\n\n- **High input impedance:** ideally, neither gate draws DC current.\n- **Rail-to-rail output:** approximately \\(0\\) or \\(V_{DD}\\).\n- **Very low static power at rail inputs:** one transistor is OFF, eliminating an ideal DC path from supply to ground; real devices have leakage.\n- **Switching power:** the pMOS charges the output capacitance and the nMOS discharges it. The capacitive contribution is approximately\n  \\[\n  P_{\\text{dyn}}=\\alpha C_LV_{DD}^{2}f,\n  \\]\n  where \\(\\alpha\\) is the average number of output \\(0\\to1\\) transitions per clock cycle. Additional short-circuit current can flow while both transistors are ON.\n\nNumerical voltages, currents, and delays require the supply, device parameters, and output load.",
        "format": "markdown",
        "sha256": "00482e9ccd433456d0a9a1cf6bad36fbf93fe403a721c95f7435f4c188a8f9ea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and describes its operation consistently. The additional analysis is also appropriate.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3971,
        "total_tokens": 4251,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3971,
        "total_tokens": 4251,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter (NOT gate)**:\n\n- \\(M_1\\) is an **NMOS pull-down** transistor, connected to ground.\n- \\(M_2\\) is a **PMOS pull-up** transistor, connected to \\(V_{DD}\\).\n- Their gates share \\(V_{\\text{in}}\\), and their drains share \\(V_{\\text{out}}\\).\n\n### 1. DC operation\n\nThe gate-to-source voltages controlling the devices are\n\\[\nV_{GS1}=V_{\\text{in}},\\qquad V_{SG2}=V_{DD}-V_{\\text{in}}.\n\\]\n\nAssuming enhancement-mode devices and negligible DC output loading:\n\n| Input | \\(M_1\\), NMOS | \\(M_2\\), PMOS | Output |\n|---|---|---|---|\n| \\(V_{\\text{in}}\\approx 0\\) | OFF | ON | \\(V_{\\text{out}}\\approx V_{DD}\\), logic 1 |\n| \\(V_{\\text{in}}\\approx V_{DD}\\) | ON | OFF | \\(V_{\\text{out}}\\approx 0\\), logic 0 |\n\nThus, the output is the **logical complement** of the input. The voltage relationship is nonlinear, not simply \\(V_{\\text{out}}=V_{DD}-V_{\\text{in}}\\).\n\n### 2. Transition region\n\nLet \\(V_{Tn}>0\\) and \\(|V_{Tp}|>0\\) be the threshold magnitudes. Both transistors are on when\n\\[\nV_{Tn}<V_{\\text{in}}<V_{DD}-|V_{Tp}|,\n\\]\nassuming the supply is large enough for this interval to exist.\n\nHere, the output is determined by the current balance\n\\[\nI_{Dn}=|I_{Dp}|.\n\\]\nAs the input rises, the NMOS becomes stronger and the PMOS weaker, so the output falls sharply.\n\n### 3. Switching voltage\n\nDefine the switching voltage \\(V_M\\) by\n\\[\nV_{\\text{in}}=V_{\\text{out}}=V_M.\n\\]\nAt this point both devices are in saturation. Using the long-channel square-law model and neglecting channel-length modulation,\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{Tn})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{Tp}|)^2,\n\\]\nwhere\n\\[\n\\beta_n=\\mu_n C_{\\text{ox}}(W/L)_1,\\qquad\n\\beta_p=\\mu_p C_{\\text{ox}}(W/L)_2.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nV_M=\n\\frac{\\sqrt{\\beta_n}\\,V_{Tn}\n+\\sqrt{\\beta_p}\\,(V_{DD}-|V_{Tp}|)}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n}.\n\\]\n\nFor matched strengths and threshold magnitudes,\n\\[\n\\beta_n=\\beta_p,\\qquad V_{Tn}=|V_{Tp}|\n\\quad\\Rightarrow\\quad\n\\boxed{V_M=\\frac{V_{DD}}{2}}.\n\\]\n\n### 4. Important properties\n\n- **Very high input resistance:** ideally, neither gate draws DC current.\n- **Very low static power at valid logic levels:** one transistor is off, so ideally there is no supply-to-ground current.\n- **Power is consumed during switching:** the output capacitance charges/discharges, and both devices may briefly conduct.\n- **High inverting gain near the switching point:** with finite transistor output resistances and no external load,\n  \\[\n  A_v\\approx-(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2}).\n  \\]",
        "format": "markdown",
        "sha256": "519ea89ce2e5648150be079d20efb4fd4723e69db885eace64207f7ac5de0bad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up. The operating description and optional switching-point and gain analysis are consistent with the circuit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3918,
        "total_tokens": 4198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3918,
        "total_tokens": 4198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both transistors are nMOS as drawn**, so this is **not a CMOS inverter**. The upper device acts as a source-follower pull-up, while the lower device pulls down.\n\nAssume an unloaded output, equal threshold voltages \\(V_T>0\\), and the long-channel square-law model, neglecting body effect and channel-length modulation. Let\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}(W/L)_i,\\qquad 0\\le V_{\\mathrm{in}}\\le V_{DD}.\n\\]\n\n## 1. Low input: \\(V_{\\mathrm{in}}\\le V_T\\)\n\nThe gate-source voltages are\n\\[\nV_{GS1}=V_{\\mathrm{in}}-V_{\\mathrm{out}},\\qquad\nV_{GS2}=V_{\\mathrm{in}}.\n\\]\n\nFor an output within the supply rails, **both transistors are off**. Consequently,\n\\[\n\\boxed{V_{\\mathrm{out}}\\text{ is floating, not pulled high.}}\n\\]\nIn practice it depends on stored charge, leakage, and any external load.\n\n## 2. Conducting state: \\(V_{\\mathrm{in}}>V_T\\)\n\nDefine \\(A=V_{\\mathrm{in}}-V_T\\). At DC equilibrium, both devices conduct and\n\\[\n0<V_{\\mathrm{out}}<A.\n\\]\n\n- **\\(M_1\\) is saturated:** its saturation condition is\n  \\[\n  V_{DD}-V_{\\mathrm{out}}\n  \\ge V_{\\mathrm{in}}-V_{\\mathrm{out}}-V_T,\n  \\]\n  which holds throughout the assumed input range.\n- **\\(M_2\\) is in triode:** \\(V_{DS2}=V_{\\mathrm{out}}<V_{\\mathrm{in}}-V_T\\).\n\nEquating their drain currents gives\n\\[\n\\frac{\\beta_1}{2}(A-V_{\\mathrm{out}})^2\n=\n\\beta_2\\left(AV_{\\mathrm{out}}-\\frac{V_{\\mathrm{out}}^2}{2}\\right).\n\\]\n\nThe physically valid solution is\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=(V_{\\mathrm{in}}-V_T)\n\\left(1-\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}\\right).\n}\n\\]\n\nFor equally sized devices, \\(\\beta_1=\\beta_2=\\beta\\):\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=\\left(1-\\frac{1}{\\sqrt2}\\right)(V_{\\mathrm{in}}-V_T)\n\\approx0.293(V_{\\mathrm{in}}-V_T).\n}\n\\]\n\nThe static supply current is\n\\[\nI_{DD}\n=\\frac{\\beta_1\\beta_2}{2(\\beta_1+\\beta_2)}\n(V_{\\mathrm{in}}-V_T)^2,\n\\]\nor \\(I_{DD}=\\beta(V_{\\mathrm{in}}-V_T)^2/4\\) for equal devices.\n\n## Interpretation\n\nUnder these assumptions:\n\n- The output **increases** with input; the conducting-state voltage gain is positive and less than one.\n- For equal devices and \\(V_{\\mathrm{in}}=V_{DD}\\),\n  \\[\n  V_{\\mathrm{out}}\\approx0.293(V_{DD}-V_T),\n  \\]\n  rather than a supply rail.\n- The circuit draws DC current when conducting and leaves the output floating at low input.\n\nThus it is a **noninverting, attenuating stage with a floating low-input state**, not a useful static logic inverter. A conventional CMOS inverter requires a **pMOS upper transistor**, with its source connected to \\(V_{DD}\\).",
        "format": "markdown",
        "sha256": "979c282663d6032f252cb3d6f27e3cbde8c663812e28da2b5bb9195fe21a190a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes the upper source-follower pull-up and lower pull-down, and concludes this is not a normal CMOS inverter. The added operating-point analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 7131,
        "total_tokens": 7426,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6330,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 7131,
        "total_tokens": 7426,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6330,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both transistors are NMOS as drawn**, so this is not a conventional CMOS inverter.\n\nAssume enhancement-mode devices with equal threshold voltage \\(V_T>0\\), inputs \\(0\\le V_{\\text{in}}\\le V_{DD}\\), and the long-channel square-law model, neglecting body effect and channel-length modulation. Define\n\\[\n\\beta_i=\\mu_n C_{\\text{ox}}(W/L)_i.\n\\]\n\nThe terminal voltages are\n\\[\n\\begin{aligned}\nV_{GS1}&=V_{\\text{in}}-V_{\\text{out}},&\nV_{DS1}&=V_{DD}-V_{\\text{out}},\\\\\nV_{GS2}&=V_{\\text{in}},&\nV_{DS2}&=V_{\\text{out}}.\n\\end{aligned}\n\\]\n\n### 1. Low input: \\(V_{\\text{in}}\\le V_T\\)\n\nFor an output within the supply rails, both transistors are off.\n\n- Ideally, there is no DC supply current.\n- **The output floats**; it is not driven to \\(V_{DD}\\).\n- Its voltage depends on stored charge, leakage, and any external load.\n\nThus, the circuit already fails the low-input/high-output requirement of an inverter.\n\n### 2. Input above threshold: \\(V_{\\text{in}}>V_T\\)\n\nAt the unloaded DC operating point, both devices conduct.\n\nFor \\(M_1\\) to conduct,\n\\[\nV_{\\text{out}}<V_{\\text{in}}-V_T.\n\\]\nThis means \\(M_2\\) operates in **triode**. Meanwhile, \\(M_1\\) is **saturated**, because\n\\[\nV_{DS1}\\ge V_{GS1}-V_T\n\\quad\\Longleftrightarrow\\quad\nV_{DD}\\ge V_{\\text{in}}-V_T,\n\\]\nwhich holds over the assumed input range.\n\nEquating their currents gives\n\\[\n\\frac{\\beta_1}{2}(V_{\\text{in}}-V_{\\text{out}}-V_T)^2\n=\n\\beta_2\\left[(V_{\\text{in}}-V_T)V_{\\text{out}}\n-\\frac{V_{\\text{out}}^2}{2}\\right].\n\\]\n\nThe physically valid solution is\n\\[\n\\boxed{\nV_{\\text{out}}\n=(V_{\\text{in}}-V_T)\n\\left(1-\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}\\right)\n}.\n\\]\n\nFor identical devices, \\(\\beta_1=\\beta_2=\\beta\\):\n\\[\n\\boxed{\nV_{\\text{out}}\n=\\left(1-\\frac{1}{\\sqrt2}\\right)(V_{\\text{in}}-V_T)\n\\approx0.293(V_{\\text{in}}-V_T)\n}.\n\\]\nIn particular, identical devices do **not** form an equal-resistance divider: their gate-to-source voltages differ.\n\nThe static supply current is\n\\[\n\\boxed{\nI_{DD}=\n\\frac{\\beta_1\\beta_2}{2(\\beta_1+\\beta_2)}\n(V_{\\text{in}}-V_T)^2\n},\n\\]\nor \\(I_{DD}=\\beta(V_{\\text{in}}-V_T)^2/4\\) for matched devices.\n\n### Conclusion\n\nThe circuit has a **floating output at low input** and a **reduced, non-inverting output above threshold**, with continuous static power dissipation \\(V_{DD}I_{DD}\\). It is not a valid static logic inverter. A conventional CMOS inverter would use a **PMOS transistor for \\(M_1\\)**.",
        "format": "markdown",
        "sha256": "644d5941fb1bc06c0cc33cf52d008cea64fe96f3ba13b019a55cc6e162c6193f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, analyzes the upper device’s input-dependent pull-up and the lower device’s triode pull-down, and concludes the circuit is not a normal CMOS inverter. The operating-point result and non-inverting behavior are correct.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 5455,
        "total_tokens": 5750,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 5455,
        "total_tokens": 5750,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both devices are NMOS as drawn**, so this is not a conventional CMOS inverter.\n\nConsider its unloaded DC behavior, assuming enhancement-mode devices with a common threshold \\(V_T>0\\), neglecting body effect and channel-length modulation. Define\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}(W/L)_i,\n\\qquad 0\\le V_{\\mathrm{in}}\\le V_{DD}.\n\\]\n\nThe device voltages are\n\\[\n\\begin{aligned}\nV_{GS1}&=V_{\\mathrm{in}}-V_{\\mathrm{out}},\n&V_{DS1}&=V_{DD}-V_{\\mathrm{out}},\\\\\nV_{GS2}&=V_{\\mathrm{in}},\n&V_{DS2}&=V_{\\mathrm{out}}.\n\\end{aligned}\n\\]\n\n### 1. Input below threshold: \\(V_{\\mathrm{in}}\\le V_T\\)\n\nFor a nonnegative output voltage, both transistors are off. Thus:\n\n- Ideally, no supply current flows.\n- **The output is floating**, not driven high or low. Its voltage depends on stored charge and leakage.\n\n### 2. Input above threshold: \\(V_{\\mathrm{in}}>V_T\\)\n\nAt the DC operating point, both devices conduct.\n\n- \\(M_1\\) is in **saturation**, because\n  \\[\n  V_{DS1}\\ge V_{GS1}-V_T\n  \\iff V_{DD}\\ge V_{\\mathrm{in}}-V_T,\n  \\]\n  which holds over the assumed input range.\n- \\(M_2\\) is in **triode**: conduction in \\(M_1\\) requires\n  \\[\n  V_{\\mathrm{out}}<V_{\\mathrm{in}}-V_T,\n  \\]\n  which is precisely \\(M_2\\)'s triode condition.\n\nEquating the currents gives\n\\[\n\\frac{\\beta_1}{2}(V_{\\mathrm{in}}-V_{\\mathrm{out}}-V_T)^2\n=\n\\beta_2\\left[(V_{\\mathrm{in}}-V_T)V_{\\mathrm{out}}\n-\\frac{V_{\\mathrm{out}}^2}{2}\\right].\n\\]\n\nThe physically valid solution is\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=(V_{\\mathrm{in}}-V_T)\n\\left(1-\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}\\right)\n}\n\\qquad(V_{\\mathrm{in}}>V_T).\n\\]\n\nThe supply current is\n\\[\n\\boxed{\nI_{DD}=\n\\frac{\\beta_1\\beta_2}{2(\\beta_1+\\beta_2)}\n(V_{\\mathrm{in}}-V_T)^2\n}.\n\\]\n\n### 3. Matched transistors\n\nIf \\(\\beta_1=\\beta_2=\\beta\\),\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=\\left(1-\\frac{1}{\\sqrt2}\\right)(V_{\\mathrm{in}}-V_T)\n\\approx0.293(V_{\\mathrm{in}}-V_T)\n}\n\\]\nand\n\\[\nI_{DD}=\\frac{\\beta}{4}(V_{\\mathrm{in}}-V_T)^2.\n\\]\n\nThus, in the conducting region, the incremental voltage gain is **positive**, approximately \\(+0.293\\) for matched devices.\n\n**Conclusion:** This circuit does not invert. It has a floating output for low inputs, an attenuated noninverting output for inputs above threshold, and static power consumption \\(P=V_{DD}I_{DD}\\) whenever both devices conduct. It therefore does not function as a proper rail-to-rail logic gate.",
        "format": "markdown",
        "sha256": "0b1befb712439103d54d55b55252baafc1b00cd4c515c29d2afd186b13326b52"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes the upper source-follower pull-up and lower pull-down, and concludes the circuit is a non-inverting attenuator rather than a CMOS inverter. The operating-region analysis and current-balance result are also consistent with the golden solution.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 5454,
        "total_tokens": 5749,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 5454,
        "total_tokens": 5749,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS common-source amplifier with a diode-connected PMOS load**:\n\n- \\(M_1\\) converts the input voltage into a pull-down current.\n- \\(M_2\\), whose gate and drain are connected together, supplies the load current.\n- The stage is **inverting**: increasing \\(V_{\\text{in}}\\) decreases \\(V_{\\text{out}}\\).\n\nAssume long-channel MOSFETs, source-connected bodies, and negligible channel-length modulation for the DC analysis. Define\n\\[\n\\beta_n=\\mu_n C_{\\text{ox}}(W/L)_1,\\qquad\n\\beta_p=\\mu_p C_{\\text{ox}}(W/L)_2,\n\\]\nwith thresholds \\(V_{Tn}>0\\) and \\(V_{Tp}<0\\).\n\n## 1. Operating regions\n\nFor \\(M_1\\),\n\\[\nV_{GS1}=V_{\\text{in}},\\qquad V_{DS1}=V_{\\text{out}}.\n\\]\nThus it is:\n- **Off** if \\(V_{\\text{in}}\\le V_{Tn}\\).\n- **Saturated** if \\(V_{\\text{in}}>V_{Tn}\\) and \\(V_{\\text{out}}\\ge V_{\\text{in}}-V_{Tn}\\).\n- **In triode** if \\(0\\le V_{\\text{out}}<V_{\\text{in}}-V_{Tn}\\).\n\nFor \\(M_2\\),\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{\\text{out}}.\n\\]\nConsequently, **\\(M_2\\) is always saturated when on**, because its saturation condition,\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{Tp}|,\n\\]\nis automatically satisfied.\n\n## 2. DC transfer characteristic\n\nWhen both devices conduct and \\(M_1\\) is saturated, their currents must be equal:\n\\[\n\\frac{\\beta_n}{2}(V_{\\text{in}}-V_{Tn})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{\\text{out}}-|V_{Tp}|)^2.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}-|V_{Tp}|\n-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,(V_{\\text{in}}-V_{Tn})\n}\n\\]\nand the bias current is\n\\[\nI_D=\\frac{\\beta_n}{2}(V_{\\text{in}}-V_{Tn})^2.\n\\]\n\nThe linear transfer expression is valid only while \\(M_1\\) remains saturated:\n\\[\n0<V_{\\text{in}}-V_{Tn}\n\\le\n\\frac{V_{DD}-|V_{Tp}|}\n{1+\\sqrt{\\beta_n/\\beta_p}}.\n\\]\n\n**At higher input voltages**, \\(M_1\\) enters triode. The output must instead satisfy\n\\[\n\\boxed{\n\\beta_n\\!\\left[\n(V_{\\text{in}}-V_{Tn})V_{\\text{out}}\n-\\frac{V_{\\text{out}}^2}{2}\n\\right]\n=\n\\frac{\\beta_p}{2}\n(V_{DD}-V_{\\text{out}}-|V_{Tp}|)^2\n}\n\\]\nusing the root in the triode region. The low output is generally above ground.\n\n**When \\(M_1\\) is off**, a previously low output charges toward \\(V_{DD}-|V_{Tp}|\\). In the ideal abrupt-cutoff model, both devices are off at or above this level, so the output is not uniquely fixed; leakage and stored charge determine its exact high-state voltage.\n\n## 3. Small-signal voltage gain\n\nAt a conducting bias point, \\(V_{DD}\\) is AC ground. The diode-connected PMOS presents the resistance\n\\[\nr_{\\text{load}}=\\frac{1}{g_{m2}+g_{ds2}}.\n\\]\n\nIncluding the intrinsic output resistances of both transistors,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n-\\frac{g_{m1}}{g_{m2}+g_{ds1}+g_{ds2}}\n}\n\\]\n\nIf channel-length modulation is negligible,\n\\[\nA_v\\approx-\\frac{g_{m1}}{g_{m2}}.\n\\]\nWith both transistors saturated and carrying the same current,\n\\[\ng_{m1}=\\sqrt{2\\beta_n I_D},\\qquad\ng_{m2}=\\sqrt{2\\beta_p I_D},\n\\]\nso\n\\[\n\\boxed{A_v\\approx-\\sqrt{\\frac{\\beta_n}{\\beta_p}}}.\n\\]\n\nThe output resistance is\n\\[\n\\boxed{\nR_{\\text{out}}\n=\n\\frac{1}{g_{m2}+g_{ds1}+g_{ds2}}\n\\approx\\frac{1}{g_{m2}}\n}.\n\\]\n\n**Key conclusion:** The diode-connected load makes the gain depend mainly on the transistor-strength ratio, rather than on \\(g_mr_o\\). Unlike a conventional CMOS inverter, this circuit does not provide strongly driven rail-to-rail outputs and consumes static power \\(P=V_{DD}I_D\\) whenever both devices conduct.",
        "format": "markdown",
        "sha256": "75074b7445ac2ffa28ef14959767e6679f2f87dc825d1ddd085201759cd1ea65"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS common-source stage with a diode-connected PMOS load and gives the inverting gain both with and without channel-length modulation, matching the full-credit rule.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 7451,
        "total_tokens": 8171,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6296,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 7451,
        "total_tokens": 8171,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6296,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit type and operation\n\nThis is an **NMOS common-source stage with a diode-connected PMOS load**:\n\n- \\(M_1\\) is driven by \\(V_{\\text{in}}\\).\n- \\(M_2\\) has its gate connected to its drain at \\(V_{\\text{out}}\\).\n- Increasing \\(V_{\\text{in}}\\) strengthens \\(M_1\\), pulling \\(V_{\\text{out}}\\) downward. Thus, the stage is **inverting**.\n\nFor \\(M_2\\),\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{\\text{out}}.\n\\]\nConsequently, whenever \\(M_2\\) conducts, it is in saturation, since\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP}|.\n\\]\n\nAssume the long-channel square-law model, initially neglecting channel-length modulation and leakage. Define\n\\[\n\\beta_n=\\mu_n C_{\\mathrm{ox}}(W/L)_1,\\qquad\n\\beta_p=\\mu_p C_{\\mathrm{ox}}(W/L)_2,\n\\]\nand, for compactness,\n\\[\na=\\sqrt{\\frac{\\beta_n}{\\beta_p}},\\qquad\nH=V_{DD}-|V_{TP}|,\\qquad\nx=V_{\\text{in}}-V_{TN}.\n\\]\n\n## 2. DC transfer characteristic\n\nWith no external DC load, the transistor currents must be equal.\n\n### A. \\(M_1\\) off: \\(V_{\\text{in}}\\le V_{TN}\\)\n\nHere \\(I_D=0\\). If the output starts below \\(H\\), \\(M_2\\) charges it toward\n\\[\nV_{\\text{out}}\\rightarrow V_{DD}-|V_{TP}|.\n\\]\n\nStrictly, in the ideal hard-threshold model, any \\(V_{\\text{out}}\\ge H\\) leaves both devices off. The output is then floating; leakage, loading, and initial charge determine its precise voltage.\n\n### B. Both devices saturated\n\nFor \\(M_1\\) to be saturated,\n\\[\nV_{\\text{out}}\\ge V_{\\text{in}}-V_{TN}=x.\n\\]\n\nEquating currents,\n\\[\n\\frac{\\beta_n}{2}(V_{\\text{in}}-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{\\text{out}}-|V_{TP}|)^2.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}-|V_{TP}|\n-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,(V_{\\text{in}}-V_{TN})\n}\n\\]\nor \\(V_{\\text{out}}=H-ax\\).\n\nThis straight-line portion applies for\n\\[\n0<x\\le \\frac{H}{1+a}.\n\\]\n\nThe saturation-to-triode boundary is\n\\[\n\\boxed{\nV_{\\text{in,b}}=V_{TN}+\\frac{H}{1+a},\n\\qquad\nV_{\\text{out,b}}=\\frac{H}{1+a}.\n}\n\\]\n\n### C. \\(M_1\\) in triode\n\nFor larger input voltages, \\(V_{\\text{out}}<x\\), so\n\\[\nI_{D1}=\\beta_n\\left(xV_{\\text{out}}-\\frac{V_{\\text{out}}^2}{2}\\right).\n\\]\n\nSince \\(M_2\\) remains saturated,\n\\[\n\\beta_n\\left(xV_{\\text{out}}-\\frac{V_{\\text{out}}^2}{2}\\right)\n=\n\\frac{\\beta_p}{2}(H-V_{\\text{out}})^2.\n\\]\n\nThe physical solution is\n\\[\n\\boxed{\nV_{\\text{out}}\n=\n\\frac{H+a^2x-\n\\sqrt{(H+a^2x)^2-(1+a^2)H^2}}\n{1+a^2}\n}\n\\]\nfor \\(x>H/(1+a)\\).\n\nThe low output remains above zero because \\(M_2\\) continues supplying current.\n\n## 3. Small-signal gain and resistances\n\nBias the circuit where \\(M_1\\) is saturated. Since \\(V_{DD}\\) is AC ground, the diode-connected \\(M_2\\) presents\n\\[\nr_{\\text{load}}=\\frac{1}{g_{m2}+g_{o2}},\n\\qquad g_{oi}=\\frac{1}{r_{oi}}.\n\\]\n\nIncluding both transistor output resistances,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-\\frac{g_{m1}}{g_{m2}+g_{o1}+g_{o2}}\n}\n\\]\nand\n\\[\n\\boxed{\nR_{\\text{out}}\n=\\frac{1}{g_{m2}+g_{o1}+g_{o2}}\n=r_{o1}\\parallel r_{o2}\\parallel\\frac{1}{g_{m2}}.\n}\n\\]\n\nNeglecting channel-length modulation,\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_{m1}}{g_{m2}}\n=-\\sqrt{\\frac{\\beta_n}{\\beta_p}}.\n}\n\\]\nThe last equality follows because both devices carry the same bias current and \\(g_m=\\sqrt{2\\beta I_D}\\).\n\nThe ideal low-frequency input resistance is infinite.\n\n**Key takeaway:** Unlike a conventional CMOS inverter, the PMOS gate is tied to the output, not the input. Its diode connection creates a relatively low-resistance load, limits voltage gain, and causes static power consumption \\(P=V_{DD}I_D\\) whenever the stage conducts.",
        "format": "markdown",
        "sha256": "dc5490f8957deb568f408bb459bca75db35978e781351f75a2628800d24a3619"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including both devices’ output conductances; its channel-length-modulation-free form also matches the golden solution.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 7965,
        "total_tokens": 8685,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6720,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 7965,
        "total_tokens": 8685,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6720,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS common-source amplifier with a diode-connected PMOS load**. \\(M_1\\) is the amplifying transistor; \\(M_2\\), whose gate and drain are connected, acts as a nonlinear load.\n\nAssume enhancement-mode MOSFETs, bodies tied to their respective sources, and no external DC load. Define\n\\[\n\\beta_n=\\mu_nC_{\\rm ox}(W/L)_1,\\qquad\n\\beta_p=\\mu_pC_{\\rm ox}(W/L)_2.\n\\]\n\n## 1. Device operating regions\n\nFor \\(M_1\\),\n\\[\nV_{GS1}=V_{\\rm in},\\qquad V_{DS1}=V_{\\rm out}.\n\\]\nThus it is:\n- **Off** when \\(V_{\\rm in}\\le V_{TN}\\).\n- **Saturated** when \\(V_{\\rm in}>V_{TN}\\) and\n  \\[\n  V_{\\rm out}\\ge V_{\\rm in}-V_{TN}.\n  \\]\n- **In triode** when \\(0\\le V_{\\rm out}<V_{\\rm in}-V_{TN}\\).\n\nFor \\(M_2\\),\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{\\rm out}.\n\\]\nIt conducts when\n\\[\nV_{\\rm out}<V_{DD}-|V_{TP}|.\n\\]\nBecause \\(V_{SD2}=V_{SG2}\\), **\\(M_2\\) is always saturated whenever it is on**.\n\n## 2. DC transfer characteristic\n\n### Both transistors saturated\nIgnoring channel-length modulation, their currents must be equal:\n\\[\nI_D=\\frac{\\beta_n}{2}(V_{\\rm in}-V_{TN})^2\n=\\frac{\\beta_p}{2}(V_{DD}-V_{\\rm out}-|V_{TP}|)^2.\n\\]\n\nConsequently,\n\\[\n\\boxed{\nV_{\\rm out}=V_{DD}-|V_{TP}|\n-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,(V_{\\rm in}-V_{TN})\n}\n\\]\n\nThis branch is valid for\n\\[\n0<V_{\\rm in}-V_{TN}\n\\le\n\\frac{V_{DD}-|V_{TP}|}\n{1+\\sqrt{\\beta_n/\\beta_p}}.\n\\]\n\nAn increasing input therefore produces a decreasing output.\n\n### Low input\nWhen \\(V_{\\rm in}\\le V_{TN}\\), \\(M_1\\) is off. In the ideal threshold-only model, \\(M_2\\) charges an initially low output toward\n\\[\nV_{DD}-|V_{TP}|.\n\\]\nStrictly, once both devices are off, the unloaded node has no unique DC voltage; subthreshold conduction and leakage determine the actual high level.\n\n### Higher input: \\(M_1\\) in triode\nOnce \\(V_{\\rm out}<V_{\\rm in}-V_{TN}\\), the output is found from\n\\[\n\\boxed{\n\\beta_n\\left[(V_{\\rm in}-V_{TN})V_{\\rm out}\n-\\frac{V_{\\rm out}^2}{2}\\right]\n=\n\\frac{\\beta_p}{2}\n(V_{DD}-V_{\\rm out}-|V_{TP}|)^2\n}\n\\]\nusing the solution satisfying the triode condition. The output approaches a low, generally nonzero voltage.\n\n## 3. Small-signal gain\n\nAt a bias point with both devices saturated, \\(V_{DD}\\) is AC ground. The diode-connected PMOS presents the small-signal resistance\n\\[\nr_L=\\frac{1}{g_{m2}+g_{o2}}\n=\\frac{1}{g_{m2}}\\parallel r_{o2}.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\rm out}}{v_{\\rm in}}\n=-\\frac{g_{m1}}{g_{m2}+g_{o1}+g_{o2}}\n}\n\\]\nwhere \\(g_{oi}=1/r_{oi}\\) accounts for channel-length modulation.\n\nNeglecting output conductances,\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_{m1}}{g_{m2}}\n=-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n}\n\\]\nbecause both devices carry the same DC current.\n\nThe resistances are approximately\n\\[\nR_{\\rm in}\\to\\infty,\\qquad\nR_{\\rm out}=\n\\frac{1}{g_{m2}+g_{o1}+g_{o2}}\n\\approx\\frac{1}{g_{m2}}.\n\\]\n\n**Key takeaway:** this is an inverting amplifier with a relatively low-resistance active load, not a conventional CMOS inverter. Whenever both transistors conduct, it draws static power\n\\[\nP_{\\rm DC}=V_{DD}I_D.\n\\]",
        "format": "markdown",
        "sha256": "1eeb48e5d45e8973b841d89f5145d68557a44546e9750667c21bcebff61eb24f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS common-source stage with a diode-connected PMOS load and gives both the inverting gain \n\\(-g_{m1}/g_{m2}\\) and the consistent channel-length-modulation form \n\\(-g_{m1}/(g_{m2}+g_{o1}+g_{o2})\\), matching the full-credit rule.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 7045,
        "total_tokens": 7765,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6003,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 7045,
        "total_tokens": 7765,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6003,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nBoth transistors are **PMOS**.\n\n- \\(M_2\\) is the **common-source amplifying transistor**: its source is at \\(V_{DD}\\), gate at \\(V_{\\text{in}}\\), and drain at \\(V_{\\text{out}}\\).\n- \\(M_1\\) is a **diode-connected load**: its gate and drain are both grounded, while its source is at \\(V_{\\text{out}}\\).\n\nThus, grounding \\(M_1\\)’s gate does **not** turn it off; it conducts when \\(V_{\\text{out}}>|V_{TP1}|\\). The circuit is an **inverting amplifier**, not a complementary CMOS inverter.\n\n## 2. DC analysis\n\nAssume enhancement-mode devices, no external DC load, and initially neglect body effect and channel-length modulation. Define\n\\[\nT_i=|V_{TPi}|,\\qquad\n\\beta_i=\\mu_p C_{\\text{ox}}\\left(\\frac WL\\right)_i.\n\\]\n\nFor \\(M_1\\),\n\\[\nV_{SG1}=V_{SD1}=V_{\\text{out}}.\n\\]\nTherefore, whenever it is on, it is automatically in saturation:\n\\[\nI_1=\\frac{\\beta_1}{2}(V_{\\text{out}}-T_1)^2.\n\\]\n\nFor \\(M_2\\),\n\\[\nV_{SG2}=V_{DD}-V_{\\text{in}},\\qquad\nV_{SD2}=V_{DD}-V_{\\text{out}}.\n\\]\nIf \\(M_2\\) is saturated,\n\\[\nI_2=\\frac{\\beta_2}{2}(V_{DD}-V_{\\text{in}}-T_2)^2.\n\\]\n\nSince \\(I_1=I_2\\),\n\\[\n\\boxed{\nV_{\\text{out}}\n=T_1+\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n\\left(V_{DD}-V_{\\text{in}}-T_2\\right)\n}\n\\]\n\nThis expression is valid while\n\\[\n\\boxed{\nV_{\\text{in}}<V_{DD}-T_2,\\qquad\nV_{\\text{out}}>T_1,\\qquad\nV_{\\text{out}}\\le V_{\\text{in}}+T_2\n}\n\\]\nwhere the last condition ensures that \\(M_2\\) remains saturated.\n\nFor identical devices, this simplifies to\n\\[\n\\boxed{V_{\\text{out}}=V_{DD}-V_{\\text{in}}}\n\\]\n**within the above operating region**.\n\n### Outside the saturation region\n\nIf \\(V_{\\text{out}}>V_{\\text{in}}+T_2\\), \\(M_2\\) enters triode. The operating point then follows from\n\\[\n\\frac{\\beta_1}{2}(V_{\\text{out}}-T_1)^2\n=\n\\beta_2\\left[\n(V_{DD}-V_{\\text{in}}-T_2)(V_{DD}-V_{\\text{out}})\n-\\frac{(V_{DD}-V_{\\text{out}})^2}{2}\n\\right].\n\\]\n\nIf \\(V_{\\text{in}}\\ge V_{DD}-T_2\\), \\(M_2\\) turns off. In the ideal zero-leakage model, both devices can be off for \\(0\\le V_{\\text{out}}\\le T_1\\), so that model does not uniquely determine the output there.\n\n## 3. Small-signal analysis\n\nTake \\(V_{DD}\\) as AC ground and assume both devices are biased in saturation.\n\nIgnoring body effect, \\(M_1\\) presents the incremental load resistance\n\\[\nr_{\\text{load}}=\\frac{1}{g_{m1}+g_{o1}},\n\\qquad g_{oi}=\\frac1{r_{oi}}.\n\\]\n\nThe output-node equation is\n\\[\n(g_{m1}+g_{o1}+g_{o2})v_{\\text{out}}\n=-g_{m2}v_{\\text{in}}.\n\\]\n\nHence,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-\\frac{g_{m2}}{g_{m1}+g_{o1}+g_{o2}}\n}\n\\]\n\nNeglecting channel-length modulation,\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_{m2}}{g_{m1}}\n=-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n}\n\\]\nbecause the two devices carry the same DC current. Matched devices therefore give approximately **unity inverting gain**, \\(A_v\\approx-1\\).\n\nThe low-frequency resistances are\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty},\n\\qquad\n\\boxed{\nR_{\\text{out}}=\\frac{1}{g_{m1}+g_{o1}+g_{o2}}\n\\approx\\frac1{g_{m1}}\n}.\n\\]\n\nIf \\(M_1\\)’s bulk is held at a fixed voltage rather than tied to its source, body effect adds \\(g_{mb1}\\) to these denominators:\n\\[\nA_v=-\\frac{g_{m2}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}.\n\\]\n\n**Overall:** increasing \\(V_{\\text{in}}\\) weakens \\(M_2\\), causing \\(V_{\\text{out}}\\) to decrease. The stage draws static current during normal amplifier operation, and its gain and output swing depend on device sizing and thresholds.",
        "format": "markdown",
        "sha256": "b3766446150c221e909c4f7a4bedfda727073f36d73daf4d50df21d33b76bc2e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, M2 as the common-source input device, and M1 as the diode-connected PMOS load with gate/drain grounded. It gives the correct gm/gm gain, approximately −gm2/gm1, and the current-balance explanation is consistent with the golden solution.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 7434,
        "total_tokens": 9112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 7434,
        "total_tokens": 9112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both transistors are **PMOS**. In particular, the upper terminal of \\(M_1\\) is its source; its **gate and drain are grounded**. Thus:\n\n- \\(M_2\\) is a common-source amplifying transistor.\n- \\(M_1\\) is a diode-connected PMOS load, viewed from its source.\n- The circuit is an **inverting amplifier**, not a conventional CMOS inverter.\n\n## 1. DC operating point\n\nDefine\n\\[\nT_i=|V_{TPi}|,\\qquad\n\\beta_i=\\mu_p C_{\\mathrm{ox}}\\left(\\frac WL\\right)_i.\n\\]\nInitially neglect body effect and channel-length modulation, and assume no external output load.\n\nFor \\(M_1\\),\n\\[\nV_{SG1}=V_{SD1}=V_{\\mathrm{out}}.\n\\]\nConsequently, it conducts when \\(V_{\\mathrm{out}}>T_1\\) and is automatically in saturation whenever it conducts.\n\nFor \\(M_2\\),\n\\[\nV_{SG2}=V_{DD}-V_{\\mathrm{in}},\\qquad\nV_{SD2}=V_{DD}-V_{\\mathrm{out}}.\n\\]\n\nIf both devices conduct in saturation, their current magnitudes are equal:\n\\[\nI=\\frac{\\beta_1}{2}(V_{\\mathrm{out}}-T_1)^2\n =\\frac{\\beta_2}{2}(V_{DD}-V_{\\mathrm{in}}-T_2)^2.\n\\]\nTherefore,\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=T_1+\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n\\left(V_{DD}-V_{\\mathrm{in}}-T_2\\right)\n}\n\\]\n\nThis result is valid provided\n\\[\nV_{\\mathrm{out}}>T_1,\\qquad\nV_{\\mathrm{in}}<V_{DD}-T_2,\n\\]\nand \\(M_2\\) satisfies its saturation condition:\n\\[\n\\boxed{V_{\\mathrm{out}}\\le V_{\\mathrm{in}}+T_2.}\n\\]\n\nFor matched devices, \\(\\beta_1=\\beta_2\\) and \\(T_1=T_2=T\\), giving\n\\[\nV_{\\mathrm{out}}=V_{DD}-V_{\\mathrm{in}}\n\\]\nover the saturation range\n\\[\n\\frac{V_{DD}-T}{2}\\le V_{\\mathrm{in}}<V_{DD}-T.\n\\]\n\n## 2. Small-signal voltage gain\n\nAt low frequencies, \\(V_{DD}\\) is AC ground. If \\(M_1\\)'s body is held at a fixed potential, its incremental conductance looking into its source is\n\\[\ng_{m1}+g_{mb1}+g_{o1},\n\\qquad g_{oi}=\\frac{1}{r_{oi}}.\n\\]\n\nSmall-signal current balance gives\n\\[\n-g_{m2}v_{\\mathrm{in}}\n=(g_{m1}+g_{mb1}+g_{o1}+g_{o2})v_{\\mathrm{out}}.\n\\]\nHence,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=-\\frac{g_{m2}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}\n\\]\nIf \\(M_1\\)'s body is tied to its source, **omit the \\(g_{mb1}\\) term**.\n\nNeglecting body effect and output conductances,\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_{m2}}{g_{m1}}\n=-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n}\n\\]\nbecause both devices carry the same DC current. Matched devices therefore give approximately **unity-magnitude inverting gain**, \\(A_v\\approx-1\\).\n\nThe corresponding resistances are\n\\[\n\\boxed{R_{\\mathrm{in}}\\approx\\infty}\n\\]\nand\n\\[\n\\boxed{\nR_{\\mathrm{out}}\n=\\frac{1}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}.\n}\n\\]\n\n## 3. Behavior outside the saturation region\n\n- **If \\(V_{\\mathrm{out}}>V_{\\mathrm{in}}+T_2\\):** \\(M_2\\) enters triode, and the linear transfer relation above no longer applies. Instead,\n  \\[\n  \\frac{\\beta_1}{2}(V_{\\mathrm{out}}-T_1)^2\n  =\n  \\beta_2\\!\\left[\n  (V_{DD}-V_{\\mathrm{in}}-T_2)(V_{DD}-V_{\\mathrm{out}})\n  -\\frac{(V_{DD}-V_{\\mathrm{out}})^2}{2}\n  \\right].\n  \\]\n\n- **If \\(V_{\\mathrm{in}}\\ge V_{DD}-T_2\\):** \\(M_2\\) turns off. \\(M_1\\) discharges an initially high output toward \\(T_1\\). In the ideal cutoff model, any \\(0\\le V_{\\mathrm{out}}\\le T_1\\) then has zero current; the output is not actively clamped to ground. Real leakage and subthreshold currents determine its eventual level.\n\nThus, the circuit draws static current whenever both transistors conduct and does not provide the usual rail-to-rail CMOS-inverter behavior.",
        "format": "markdown",
        "sha256": "bd117a2dc58180e8049f142557c657ce2f9553e99838697d0b93f405b4e5cf04"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain grounded. It gives the expected gm/gm gain, approximately −gm2/gm1; the additional operating-region discussion does not contradict the essential analysis.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 9077,
        "total_tokens": 10755,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 9077,
        "total_tokens": 10755,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both transistors are **pMOS**. The circuit is an **inverting common-source stage with a diode-connected load**:\n\n- \\(M_2\\): source at \\(V_{DD}\\), gate at \\(V_{\\text{in}}\\), drain at \\(V_{\\text{out}}\\).\n- \\(M_1\\): source at \\(V_{\\text{out}}\\), with its gate and drain grounded.\n\nImportantly, \\(M_1\\) is **not necessarily off** because its gate is grounded: its source-to-gate voltage is \\(V_{\\text{out}}\\).\n\n## 1. DC operation\n\nDefine\n\\[\nT_i=|V_{TPi}|,\\qquad \\beta_i=\\mu_p C_{\\text{ox}}(W/L)_i.\n\\]\nInitially neglect body effect and channel-length modulation.\n\nThe transistor voltages are\n\\[\nV_{SG1}=V_{SD1}=V_{\\text{out}},\n\\]\n\\[\nV_{SG2}=V_{DD}-V_{\\text{in}},\\qquad\nV_{SD2}=V_{DD}-V_{\\text{out}}.\n\\]\n\n### Operating regions\n\nBecause \\(M_1\\) is diode-connected, it is always in saturation when on:\n\\[\nV_{\\text{out}}>T_1.\n\\]\n\nFor \\(M_2\\) to be on,\n\\[\nV_{\\text{in}}<V_{DD}-T_2.\n\\]\nIts saturation condition is\n\\[\nV_{SD2}\\ge V_{SG2}-T_2\n\\quad\\Longrightarrow\\quad\n\\boxed{V_{\\text{out}}\\le V_{\\text{in}}+T_2.}\n\\]\n\n### Transfer relation when both devices are saturated\n\nEquating the downward currents through the two devices,\n\\[\nI=\\frac{\\beta_1}{2}(V_{\\text{out}}-T_1)^2\n =\\frac{\\beta_2}{2}(V_{DD}-V_{\\text{in}}-T_2)^2.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nV_{\\text{out}}\n=T_1+\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n\\left(V_{DD}-V_{\\text{in}}-T_2\\right)\n}\n\\]\nprovided the operating-region conditions above hold.\n\nThus, increasing \\(V_{\\text{in}}\\) weakens \\(M_2\\), reducing the current and lowering \\(V_{\\text{out}}\\): the stage is **inverting**.\n\nFor matched devices, \\(\\beta_1=\\beta_2\\) and \\(T_1=T_2=T\\),\n\\[\nV_{\\text{out}}=V_{DD}-V_{\\text{in}}\n\\]\nin the saturation region, specifically\n\\[\n\\frac{V_{DD}-T}{2}\\le V_{\\text{in}}<V_{DD}-T.\n\\]\n\n## 2. Small-signal gain\n\nAt AC, \\(V_{DD}\\) is ground. Looking into the source of \\(M_1\\), its small-signal load conductance is\n\\[\ng_{m1}+g_{ds1},\n\\]\nwith an additional \\(g_{mb1}\\) if its bulk is held at a fixed potential.\n\nConsequently,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-\\frac{g_{m2}}\n{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}\n}\n\\]\nwhere \\(g_{dsi}=1/r_{oi}\\). Omit the \\(g_{mb1}\\) term if \\(M_1\\)'s bulk is tied to its source or body effect is neglected.\n\nIgnoring body effect and output conductances,\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_{m2}}{g_{m1}}\n=-\\sqrt{\\frac{\\beta_2}{\\beta_1}}.\n}\n\\]\n\nThus matched devices give approximately \\(-1\\) voltage gain. The low-frequency resistances are\n\\[\nR_{\\text{in}}\\approx\\infty,\\qquad\nR_{\\text{out}}=\n\\frac{1}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}.\n\\]\n\n## 3. Operation outside the saturation region\n\n- **Low input voltage:** \\(M_2\\) may enter triode when\n  \\[\n  V_{\\text{out}}>V_{\\text{in}}+T_2.\n  \\]\n  Then the output follows the current-balance equation\n  \\[\n  \\frac{\\beta_1}{2}(V_{\\text{out}}-T_1)^2\n  =\n  \\beta_2\\!\\left[\n  (V_{DD}-V_{\\text{in}}-T_2)(V_{DD}-V_{\\text{out}})\n  -\\frac{(V_{DD}-V_{\\text{out}})^2}{2}\n  \\right].\n  \\]\n\n- **High input voltage:** for \\(V_{\\text{in}}\\ge V_{DD}-T_2\\), \\(M_2\\) is off. A previously high output discharges through \\(M_1\\) toward \\(T_1\\). In the ideal hard-cutoff model, any output between \\(0\\) and \\(T_1\\) leaves both devices off, so the final voltage is not uniquely determined; real leakage resolves it.\n\nHence this is **not a conventional rail-to-rail CMOS inverter**. It has a threshold-limited/floating low-output region in the ideal model and consumes static power \\(P=V_{DD}I\\) whenever both devices conduct.",
        "format": "markdown",
        "sha256": "b4c77685b5fbe588a59ac7f199cf6ed7040ba592ca8fb3964ec9f384d4242274"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load. It gives the required gm/gm gain, Av ≈ −gm2/gm1; the additional operating-region discussion does not contradict the essential interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 11426,
        "total_tokens": 13104,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 11426,
        "total_tokens": 13104,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume both PMOS transistors operate in saturation and neglect body effect. The fixed voltages \\(V_{DD},V_{b1},V_{b2}\\) are AC grounds, so \\(M_2\\) presents resistance \\(r_{o2}\\) at node \\(X\\).\n\nApply a test voltage \\(v_t\\) at the output, drawing current \\(i_t\\) into the circuit. Then\n\\[\nv_x=i_t r_{o2},\n\\qquad\ni_t=\\frac{v_t-v_x}{r_{o1}}-g_{m1}v_x.\n\\]\nSubstituting and rearranging gives\n\\[\n\\boxed{R_{\\text{out}}=\\frac{v_t}{i_t}\n=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}.\n\\]\n\nWhen the cascode gain is large,\n\\[\n\\boxed{R_{\\text{out}}\\approx g_{m1}r_{o1}r_{o2}}.\n\\]\n\nIf body effect is included with \\(M_1\\)'s body at AC ground, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).",
        "format": "markdown",
        "sha256": "76868339b5767c02ef15d2d94cbb9655adc6620b074a1e687bb2dea646573835"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, uses M1 as the cascode device, and gives the correct output-resistance expression and approximation. The optional body-effect adjustment is also correct.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2669,
        "output_tokens": 1532,
        "total_tokens": 4201,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1265,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2669,
        "output_tokens": 1532,
        "total_tokens": 4201,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1265,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume both PMOS transistors are in saturation and neglect body effect. Since \\(V_{DD},V_{b1},V_{b2}\\) are AC grounds, \\(M_2\\) presents \\(r_{o2}\\) from node \\(X\\) to ground; \\(M_1\\) is the cascode device.\n\nApply a test voltage \\(v_t\\) at the output, drawing current \\(i_t\\) into the circuit:\n\\[\nv_x=i_t r_{o2},\n\\qquad\ni_t=\\frac{v_t-v_x}{r_{o1}}-g_{m1}v_x.\n\\]\n\nEliminating \\(v_x\\),\n\\[\n\\boxed{R_{\\text{out}}=\\frac{v_t}{i_t}\n=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nIn the usual high-gain limit,\n\\[\n\\boxed{R_{\\text{out}}\\approx g_{m1}r_{o1}r_{o2}}.\n\\]\n\nIf body effect is included with \\(M_1\\)’s bulk at AC ground, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).",
        "format": "markdown",
        "sha256": "6193911d350377811113b75828449ac2f373633f0db61643a554346a0f387e23"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M1 as the cascode device, and gives the required output-resistance expression and high-gain approximation. Neglecting body effect is permitted.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 2344,
        "total_tokens": 5013,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 2344,
        "total_tokens": 5013,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume both PMOS transistors operate in saturation and neglect body effect. The supply and bias voltages are **AC grounds**, so \\(M_2\\) presents \\(r_{o2}\\) at node \\(X\\), while \\(M_1\\) acts as the cascode.\n\nInject a test current \\(i_t\\) into the output:\n\\[\nv_x=i_t r_{o2},\n\\qquad\nv_t=v_x+r_{o1}(i_t+g_{m1}v_x).\n\\]\n\nThus,\n\\[\n\\boxed{R_{\\text{out}}=\\frac{v_t}{i_t}\n=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nFor large transistor intrinsic gain,\n\\[\n\\boxed{R_{\\text{out}}\\approx g_{m1}r_{o1}r_{o2}}.\n\\]\n\nIf body effect is included with \\(M_1\\)'s body AC-grounded, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).",
        "format": "markdown",
        "sha256": "238afcf17ad5dbbb40ff841fc22794d8020eafc3d002335bb25aa75c73102ba0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M1 as the cascode, and gives the correct output-resistance expression and approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 1592,
        "total_tokens": 4261,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1352,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 1592,
        "total_tokens": 4261,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1352,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Since \\(M_2\\) is a **PMOS**, saturation requires\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP2}|.\n\\]\nHere \\(V_{SD2}=V_{DD}-V_X\\) and \\(V_{SG2}=V_{DD}-V_{b2}\\), so\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|}.\n\\]\nAlso, \\(V_{DD}-V_{b2}>|V_{TP2}|\\) is required to turn \\(M_2\\) on.\n\n**To enforce this, choose \\(V_{b1}\\) sufficiently low.** At the intended bias current, with \\(M_1\\) operating in saturation,\n\\[\nV_X=V_{b1}+V_{SG1}\n   =V_{b1}+|V_{TP1}|+V_{\\mathrm{OV1}},\n\\]\nwhere \\(V_{\\mathrm{OV1}}\\) is \\(M_1\\)’s overdrive voltage. Thus choose\n\\[\nV_{b1}+|V_{TP1}|+V_{\\mathrm{OV1}}\n\\le V_{b2}+|V_{TP2}|.\n\\]\n\nFor equal threshold magnitudes, this simplifies to\n\\[\n\\boxed{V_{b2}-V_{b1}\\ge V_{\\mathrm{OV1}}}.\n\\]\n\nIn practice, leave some margin rather than biasing exactly at equality. Physically, \\(M_1\\) must hold node \\(X\\) low enough that \\(M_2\\) has at least one overdrive voltage of source–drain headroom.",
        "format": "markdown",
        "sha256": "90e1b69e83d99bc0d3c7f5c416967e604a249efe6db1ea723b66b42688e5ea94"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both relevant PMOS relations, derives M2’s saturation condition, and relates VX to Vb1 to obtain the Vb1 bias constraint. The equal-threshold simplification is also correct.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 2427,
        "total_tokens": 4992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 2427,
        "total_tokens": 4992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Because \\(M_2\\) is a **PMOS**, it must have enough source-to-drain voltage to remain saturated:\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP2}|.\n\\]\n\nHere, \\(V_{SD2}=V_{DD}-V_X\\) and \\(V_{SG2}=V_{DD}-V_{b2}\\). Therefore,\n\\[\nV_{DD}-V_X\\ge V_{DD}-V_{b2}-|V_{TP2}|,\n\\]\nor\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|=V_{DD}-V_{OV2}}.\n\\]\nThus, **node \\(X\\) must be at least one overdrive voltage below \\(V_{DD}\\)**.\n\n### How to set the bias\nAt the desired branch current, \\(M_1\\) requires a particular \\(V_{SG1}\\), giving\n\\[\nV_X=V_{b1}+V_{SG1}\n    =V_{b1}+|V_{TP1}|+V_{OV1}.\n\\]\nChoose \\(V_{b1}\\) so that\n\\[\nV_{b1}+|V_{TP1}|+V_{OV1}\n\\le V_{b2}+|V_{TP2}|.\n\\]\n\nFor equal threshold magnitudes (neglecting body effect), this simplifies to\n\\[\n\\boxed{V_{b2}-V_{b1}\\ge V_{OV1}}.\n\\]\n\nUse some margin rather than equality, which is only the saturation boundary. Also ensure \\(V_{DD}-V_{b2}>|V_{TP2}|\\), so \\(M_2\\) is on.",
        "format": "markdown",
        "sha256": "fd6a8f54c0be0745e19a0ff2a77c41c1bf4655673e1440cf4f7f3bd2632aab95"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives M2’s PMOS saturation condition, relates VX to Vb1 through M1, and derives the equivalent bias condition Vb2 − Vb1 ≥ M1’s overdrive for equal threshold magnitudes.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 2443,
        "total_tokens": 5008,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 2443,
        "total_tokens": 5008,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_2\\) is a **PMOS**, so it is in saturation when\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP2}|.\n\\]\nHere,\n\\[\nV_{SD2}=V_{DD}-V_X,\\qquad V_{SG2}=V_{DD}-V_{b2}.\n\\]\nTherefore,\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|}.\n\\]\nIn other words, node \\(X\\) must remain sufficiently below \\(V_{DD}\\) to provide \\(M_2\\)’s required saturation headroom.\n\n**You control \\(V_X\\) through \\(V_{b1}\\).** At the intended bias current, with \\(M_1\\) operating in saturation,\n\\[\nV_X=V_{b1}+V_{SG1}.\n\\]\nThus choose\n\\[\n\\boxed{V_{b1}\\le V_{b2}+|V_{TP2}|-V_{SG1}}.\n\\]\nIf the threshold magnitudes are equal, using \\(V_{SG1}=|V_{TP1}|+V_{\\mathrm{OV1}}\\), this simplifies to\n\\[\nV_{b1}\\le V_{b2}-V_{\\mathrm{OV1}}.\n\\]\n\nUse some margin rather than biasing exactly at the boundary. Also ensure \\(V_{DD}-V_{b2}>|V_{TP2}|\\), so \\(M_2\\) is actually on.",
        "format": "markdown",
        "sha256": "51bd10d277f865f529f743e1e646c3cd695dc68e5f4c0dd73149fbe1ab4b7d5c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives M2’s PMOS saturation condition and uses the M1 relation to derive the required bound on Vb1, including the equivalent equal-threshold overdrive form.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 2537,
        "total_tokens": 5102,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 2537,
        "total_tokens": 5102,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS cascode amplifier** with a current-source load:\n\n- \\(M_1\\) is the common-source input transistor.\n- \\(M_2\\) is the common-gate cascode transistor, biased by \\(V_{b1}\\).\n- \\(I_1\\) sets the DC current.\n\nAssume both transistors operate in saturation, \\(V_{b1}\\) is a fixed bias, and body effect is neglected.\n\n### 1. DC bias and voltage headroom\n\nWith no DC load at the output,\n\\[\nI_{D1}=I_{D2}=I_1.\n\\]\n\nDefine \\(V_{OVi}=V_{GSi}-V_{Ti}\\). Using the approximate square-law model,\n\\[\nV_{OVi}\\simeq\\sqrt{\\frac{2I_1}{\\beta_i}},\n\\qquad \\beta_i=\\mu_n C_{\\rm ox}(W/L)_i.\n\\]\nThus,\n\\[\nV_{\\rm in,Q}\\simeq V_{T1}+V_{OV1},\n\\qquad\nV_{X,Q}\\simeq V_{b1}-V_{T2}-V_{OV2}.\n\\]\n\nThe saturation conditions are\n\\[\n\\boxed{V_X\\ge V_{OV1}}\n\\]\nfor \\(M_1\\), and\n\\[\n\\boxed{V_{\\rm out}\\ge V_X+V_{OV2}=V_{b1}-V_{T2}}\n\\]\nfor \\(M_2\\).\n\nConsequently, the cascode bias must satisfy\n\\[\nV_{b1}\\ge V_{T2}+V_{OV1}+V_{OV2}.\n\\]\nWith minimum-headroom biasing,\n\\[\nV_{\\rm out,min}\\simeq V_{OV1}+V_{OV2}.\n\\]\nA practical current-source load also imposes an upper limit,\n\\[\nV_{\\rm out,max}\\simeq V_{DD}-V_{\\rm compliance}.\n\\]\n\n### 2. Unloaded small-signal voltage gain\n\nRetain the finite transistor output resistances \\(r_{o1},r_{o2}\\). At low frequency, the ideal current source becomes an **open circuit**, while \\(V_{b1}\\) is AC ground.\n\nBecause the load current has no small-signal variation, nodal analysis gives\n\\[\ng_{m1}v_{\\rm in}+\\frac{v_x}{r_{o1}}=0,\n\\]\n\\[\n-g_{m2}v_x+\\frac{v_{\\rm out}-v_x}{r_{o2}}=0.\n\\]\n\nTherefore,\n\\[\n\\frac{v_x}{v_{\\rm in}}=-g_{m1}r_{o1},\n\\qquad\n\\frac{v_{\\rm out}}{v_x}=1+g_{m2}r_{o2},\n\\]\nand the overall gain is\n\\[\n\\boxed{\nA_v=\\frac{v_{\\rm out}}{v_{\\rm in}}\n=-g_{m1}r_{o1}\\left(1+g_{m2}r_{o2}\\right)\n}.\n\\]\n\nFor \\(g_{m2}r_{o2}\\gg1\\),\n\\[\n\\boxed{A_v\\simeq-g_{m1}g_{m2}r_{o1}r_{o2}}.\n\\]\nFor identical devices, this becomes \\(A_v\\simeq-(g_mr_o)^2\\). The amplifier is **inverting**.\n\n### 3. Input and output resistances\n\nIgnoring gate leakage,\n\\[\n\\boxed{R_{\\rm in}\\approx\\infty}\n\\]\nat low frequency.\n\nSetting the input signal to zero and looking into the output gives\n\\[\n\\boxed{\nR_{\\rm out}=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n\\simeq g_{m2}r_{o1}r_{o2}\n}.\n\\]\n\nIf the current source has finite output resistance \\(r_I\\), it shunts this resistance:\n\\[\nR_{\\rm out,total}=R_{\\rm out}\\parallel r_I,\n\\]\nand, to a good approximation,\n\\[\nA_v\\simeq-g_{m1}(R_{\\rm out}\\parallel r_I).\n\\]\n\n**Main result:** \\(M_2\\) greatly increases the output resistance and attainable voltage gain, at the cost of additional voltage headroom.\n\nTwo qualifications:\n- If \\(M_2\\)'s bulk is grounded, include body effect by replacing \\(g_{m2}\\) with \\(g_{m2}+g_{mb2}\\) in the small-signal formulas.\n- If channel-length modulation is completely neglected (\\(r_o\\to\\infty\\)), the ideal current-source-loaded circuit has no uniquely determined output bias or finite unloaded voltage gain.",
        "format": "markdown",
        "sha256": "e693641cd3493a61c6e1eb4b870f5cc73408a9c6106e7438f8a9aafb4dd9795d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the ideal-current-source-load gain equivalent to the golden result. Omitting body effect is explicitly allowed; the additional bias and resistance discussion is consistent.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 8802,
        "total_tokens": 10104,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 8802,
        "total_tokens": 10104,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **current-source-loaded NMOS cascode amplifier**:\n\n- \\(M_1\\) is the common-source input transistor.\n- \\(M_2\\) is a common-gate transistor biased by \\(V_{b1}\\).\n- \\(I_1\\) sets the DC current through both transistors.\n\nAssume low-frequency operation, both MOSFETs in saturation, a fixed \\(V_{b1}\\), and negligible body effect.\n\n## 1. DC operating point and headroom\n\nBecause the transistors are in series,\n\\[\nI_{D1}=I_{D2}=I_1.\n\\]\n\nDefine \\(V_{OVi}=V_{GSi}-V_{Ti}\\). Approximately, using the square-law model,\n\\[\nV_{OVi}\\approx\\sqrt{\\frac{2I_1}{k_i}},\n\\qquad k_i=\\mu_nC_{\\mathrm{ox}}(W/L)_i.\n\\]\n\nThe required input bias and intermediate-node voltage are\n\\[\n\\boxed{V_{\\mathrm{in},Q}=V_{T1}+V_{OV1}},\n\\]\n\\[\n\\boxed{V_{X,Q}=V_{b1}-V_{T2}-V_{OV2}}.\n\\]\n\nFor saturation:\n\n- \\(M_1\\):\n  \\[\n  V_{X,Q}\\ge V_{OV1}.\n  \\]\n- \\(M_2\\):\n  \\[\n  V_{\\mathrm{out},Q}-V_{X,Q}\\ge V_{OV2}.\n  \\]\n\nConsequently,\n\\[\nV_{b1}\\ge V_{T2}+V_{OV1}+V_{OV2},\n\\]\nand\n\\[\n\\boxed{V_{\\mathrm{out},Q}\\ge V_{b1}-V_{T2}}.\n\\]\n\nWith the minimum suitable cascode bias, the lowest output voltage is approximately\n\\[\n\\boxed{V_{\\mathrm{out,min}}\\approx V_{OV1}+V_{OV2}}.\n\\]\nThe upper limit depends on the compliance voltage required by the current source.\n\n## 2. Small-signal voltage gain\n\nLet \\(g_{mi}\\) and \\(r_{oi}\\) denote the transistor transconductances and output resistances. The ideal current source is an **open circuit for small signals**.\n\nWith no external output load, the incremental drain currents are zero. Thus,\n\\[\n0=g_{m1}v_{\\mathrm{in}}+\\frac{v_x}{r_{o1}},\n\\]\nso\n\\[\nv_x=-g_{m1}r_{o1}v_{\\mathrm{in}}.\n\\]\n\nFor \\(M_2\\), its gate is at AC ground:\n\\[\n0=-g_{m2}v_x+\\frac{v_{\\mathrm{out}}-v_x}{r_{o2}}.\n\\]\nTherefore,\n\\[\nv_{\\mathrm{out}}=(1+g_{m2}r_{o2})v_x.\n\\]\n\nThe unloaded gain is\n\\[\n\\boxed{\nA_{v0}=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=-g_{m1}r_{o1}(1+g_{m2}r_{o2})\n}.\n\\]\n\nFor \\(g_{m2}r_{o2}\\gg1\\),\n\\[\n\\boxed{A_{v0}\\approx-g_{m1}g_{m2}r_{o1}r_{o2}}.\n\\]\n\nThe negative sign indicates an **inverting amplifier**.\n\n## 3. Input and output resistance\n\nIgnoring gate leakage and capacitances,\n\\[\n\\boxed{R_{\\mathrm{in}}\\approx\\infty}.\n\\]\n\nWith the input AC-grounded, the resistance looking into the cascode drain is\n\\[\n\\boxed{\nR_{\\mathrm{cas}}\n=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n}.\n\\]\n\nFor large intrinsic gain,\n\\[\nR_{\\mathrm{cas}}\\approx g_{m2}r_{o1}r_{o2}.\n\\]\n\nIf the current source has finite output resistance \\(r_I\\), then\n\\[\n\\boxed{R_{\\mathrm{out}}=R_{\\mathrm{cas}}\\parallel r_I},\n\\qquad\n\\boxed{A_v=A_{v0}\\frac{r_I}{r_I+R_{\\mathrm{cas}}}}.\n\\]\n\nBody effect in \\(M_2\\), if relevant, is included in these small-signal expressions by replacing \\(g_{m2}\\) with \\(g_{m2}+g_{mb2}\\).\n\n**Main trade-off:** the cascode greatly increases output resistance and gain, but requires additional voltage headroom. If channel-length modulation is completely neglected and \\(I_1\\) is ideal, the saturated DC model does not uniquely determine \\(V_{\\mathrm{out}}\\) and predicts no finite small-signal voltage gain.",
        "format": "markdown",
        "sha256": "a02b0ce4de5339dcd13f99caedd5d7dc43aa207749a9cf1921b852a7023db7f3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the equivalent ideal-load gain. The extra operating-point discussion does not alter the essential answer.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 6226,
        "total_tokens": 7528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 6226,
        "total_tokens": 7528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS cascode amplifier**:\n\n- \\(M_1\\): common-source input transistor.\n- \\(M_2\\): common-gate cascode transistor, biased by \\(V_{b1}\\).\n- \\(I_1\\): bias-current source and active load.\n\nBelow, assume both MOSFETs operate in saturation, \\(V_{b1}\\) is AC-grounded, body effect is neglected, and \\(I_1\\) is ideal.\n\n## 1. DC operating point and voltage headroom\n\nSince the transistors are in series,\n\\[\nI_{D1}=I_{D2}=I_1.\n\\]\n\nUsing square-law bias estimates,\n\\[\nV_{\\mathrm{OV}i}=\\sqrt{\\frac{2I_1}{\\beta_i}},\n\\qquad\n\\beta_i=\\mu_nC_{\\mathrm{ox}}(W/L)_i.\n\\]\nThus,\n\\[\nV_{\\mathrm{in},Q}=V_{TH1}+V_{\\mathrm{OV}1},\n\\qquad\nV_X=V_{b1}-V_{TH2}-V_{\\mathrm{OV}2}.\n\\]\n\nThe saturation requirements are\n\\[\n\\begin{aligned}\nM_1:&\\quad V_X\\ge V_{\\mathrm{OV}1},\\\\\nM_2:&\\quad V_{\\mathrm{out}}-V_X\\ge V_{\\mathrm{OV}2}.\n\\end{aligned}\n\\]\n\nConsequently,\n\\[\nV_{b1}\\ge V_{TH2}+V_{\\mathrm{OV}2}+V_{\\mathrm{OV}1},\n\\qquad\nV_{\\mathrm{out}}\\ge V_{b1}-V_{TH2}.\n\\]\n\nWith the lowest suitable cascode bias, the minimum output voltage is approximately\n\\[\n\\boxed{V_{\\mathrm{out,min}}\\approx\nV_{\\mathrm{OV}1}+V_{\\mathrm{OV}2}}.\n\\]\nA practical current source also imposes an upper limit,\n\\(V_{\\mathrm{out,max}}\\approx V_{DD}-V_{\\mathrm{compliance}}\\).\n\nIf channel-length modulation is neglected entirely, the ideal model does **not** establish a unique quiescent output voltage within the permitted range.\n\n## 2. Low-frequency voltage gain\n\nRetain the finite transistor output resistances \\(r_{o1}\\) and \\(r_{o2}\\). Lowercase voltages below denote small-signal quantities.\n\nThe ideal current source becomes an open circuit in the small-signal model. With no external output load, the incremental drain currents are therefore zero:\n\\[\n0=g_{m1}v_{\\mathrm{in}}+\\frac{v_x}{r_{o1}},\n\\]\n\\[\n0=-g_{m2}v_x+\\frac{v_{\\mathrm{out}}-v_x}{r_{o2}}.\n\\]\n\nThese give\n\\[\nv_x=-g_{m1}r_{o1}v_{\\mathrm{in}},\n\\qquad\nv_{\\mathrm{out}}=(1+g_{m2}r_{o2})v_x.\n\\]\n\nHence the unloaded voltage gain is\n\\[\n\\boxed{\nA_{v0}=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=-g_{m1}r_{o1}(1+g_{m2}r_{o2})\n}.\n\\]\n\nFor \\(g_{m2}r_{o2}\\gg1\\),\n\\[\n\\boxed{A_{v0}\\approx-g_{m1}g_{m2}r_{o1}r_{o2}}.\n\\]\nFor identical devices, this becomes approximately\n\\[\nA_{v0}\\approx-(g_mr_o)^2.\n\\]\n\nThe negative sign means that the amplifier is **inverting**.\n\n## 3. Input and output resistance\n\nNeglecting gate leakage and capacitance,\n\\[\n\\boxed{R_{\\mathrm{in}}\\rightarrow\\infty}.\n\\]\n\nWith the input AC-grounded, the resistance looking into the drain of \\(M_2\\) is\n\\[\n\\boxed{\nR_{\\mathrm{out}}\n=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n}.\n\\]\nFor large intrinsic gain,\n\\[\nR_{\\mathrm{out}}\\approx g_{m2}r_{o1}r_{o2}.\n\\]\n\nIf an effective resistance \\(R_L\\) loads the output—including any finite output resistance of the current source—then\n\\[\nA_v=A_{v0}\\frac{R_L}{R_L+R_{\\mathrm{out}}}\n\\approx-g_{m1}(R_{\\mathrm{out}}\\parallel R_L).\n\\]\n\nIf \\(M_2\\)'s body effect is significant, replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\) in these small-signal expressions.\n\n**Main tradeoff:** the cascode isolates \\(M_1\\)'s drain from output-voltage changes, greatly increasing output resistance and gain, but requires extra voltage headroom and therefore reduces output swing.",
        "format": "markdown",
        "sha256": "2a0bdba0bcd508b89bbedce05a1392459071c74311d8a69c6a7cc96f227144a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the ideal-load gain expression required for full credit. Omitting body effect is allowed.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 8252,
        "total_tokens": 9554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7166,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 8252,
        "total_tokens": 9554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7166,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not as drawn.** Although the transistors are stacked, their **sources are connected together**.\n\n- \\(M_1\\) is a **PMOS**, as indicated by its arrow. Its drain is grounded, and its gate receives \\(V_{\\text{in}}\\), so it is in a **common-drain (source-follower)** configuration.\n- \\(M_2\\) is an **NMOS** whose gate is held at \\(V_{b1}\\), so it is in a **common-gate** configuration.\n\nA cascode requires a **common-source input device feeding a common-gate device**: the input transistor’s **drain** connects to the cascode transistor’s **source**.\n\nThus, this is a **common-drain–common-gate combination**, not a cascode.",
        "format": "markdown",
        "sha256": "df314da7afeaea57d0320c85db16ad2369d2cb7b7653a0057e4a79fc78eb6ecd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says the circuit is not a cascode and identifies M1 as a PMOS source follower, not the common-source input device required for a cascode. The output-resistance consequence is not required.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 1726,
        "total_tokens": 3102,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 1726,
        "total_tokens": 3102,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not as drawn.** The transistor polarities and source connections are important:\n\n- **\\(M_1\\) is a PMOS**, with its source at the upper terminal and its drain grounded. It therefore operates as a **common-drain (source-follower)** stage.\n- **\\(M_2\\) is an NMOS**, with its gate held at the fixed bias \\(V_{b1}\\), so it operates as a **common-gate** stage.\n\nThus, this is a **source follower followed by a common-gate stage**, with the two sources connected.\n\nA cascode instead consists of a **common-source stage followed by a common-gate stage**: the input transistor’s **drain** connects to the common-gate transistor’s **source**. Simply stacking two transistors does not make a cascode.",
        "format": "markdown",
        "sha256": "aedec96839d605ba9b6d6949ef39b63fc4f7c12a13c96015763080d1c0791ddd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower and M2 as a common-gate NMOS, explaining why the circuit is not a cascode. Output-resistance analysis is not required for full credit.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 2423,
        "total_tokens": 3799,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 2423,
        "total_tokens": 3799,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not as drawn.** The arrow on \\(M_1\\) identifies it as a **PMOS**, with its **source at the middle node** and its **drain grounded**.\n\nThus:\n- \\(M_1\\) is a **common-drain (source-follower)** stage.\n- \\(M_2\\) is a **common-gate** stage, assuming \\(V_{b1}\\) is a fixed bias.\n\nTheir **sources are connected together**. A cascode instead consists of a **common-source stage feeding a common-gate stage**, with the first transistor’s **drain** connected to the second transistor’s **source**.\n\nIf \\(M_1\\) were an NMOS with its source grounded and its drain connected to \\(M_2\\)’s source, this would be a conventional cascode.",
        "format": "markdown",
        "sha256": "20e3c8c0a3ba7dbfba963e8be9c70089e035273c09fc8b23e84d854533081165"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower with its drain grounded and M2 as common-gate, explaining why the circuit is not a cascode.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 1708,
        "total_tokens": 3084,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1528,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 1708,
        "total_tokens": 3084,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1528,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect occurs when a capacitance connects an amplifier’s input to an inverting, amplified signal. Its effective input capacitance is\n\n\\[\nC_{\\text{in,M}}=C_f(1-A_v)=C_f(1+|A_v|),\n\\]\n\nso a large negative voltage gain greatly increases the apparent capacitance.\n\nIn a **cascode**, the input transistor’s gate–drain capacitance \\(C_{gd}\\) (or base–collector capacitance \\(C_{bc}\\)) connects to an **intermediate node**, not to the final output. The upper common-gate/common-base transistor presents a low impedance at this node, limiting its voltage swing.\n\nTherefore:\n- The gain relevant to the input transistor’s Miller capacitance is the small gain to this intermediate node—often approximately \\(-1\\)—rather than the large overall cascode gain.\n- The large output swing occurs at the upper transistor’s drain/collector. Its gate/base is AC-grounded, so its feedback capacitance mainly loads the output rather than feeding back to the signal input.\n\nThus, a cascode retains **high overall gain while greatly reducing Miller multiplication**, resulting in lower input capacitance and wider bandwidth.",
        "format": "markdown",
        "sha256": "57b19be766ab3b358e720cc0b752bbd90e97a92ef90d9656ca7b47d63c1d9275"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance intermediate node and the roughly −1 gain across the input transistor’s Cgd, reducing Miller multiplication while preserving high overall gain. The secondary capacitance discussion is also consistent.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2322,
        "total_tokens": 2341,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2322,
        "total_tokens": 2341,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is reduced in a cascode because **the input transistor’s collector/drain does not experience the large output-voltage swing**.\n\nFor a capacitance \\(C_f\\) connecting the input to a node with voltage gain \\(A_v\\), the effective input capacitance is\n\\[\nC_{\\text{in,Miller}}=C_f(1-A_v).\n\\]\nIn an ordinary common-emitter or common-source amplifier, \\(A_v\\) is large and negative, so the base–collector or gate–drain capacitance appears greatly enlarged at the input.\n\nA cascode places a **common-base/common-gate transistor above the input transistor**:\n\n- The upper transistor presents a low small-signal impedance at its emitter/source, keeping the lower transistor’s collector/drain voltage relatively steady.\n- Consequently, the gain from the input to this intermediate node is small—often approximately \\(-1\\) under usual approximations. The lower transistor’s feedback capacitance then appears as roughly \\(2C_f\\), rather than being multiplied by the large overall amplifier gain.\n- The large voltage swing occurs at the upper transistor’s collector/drain. Its base/gate is AC-grounded, so its base–collector/gate–drain capacitance mainly loads the output rather than feeding that swing back to the input.\n\nThus, **a cascode maintains high overall gain while reducing input Miller capacitance**, improving high-frequency response and bandwidth.",
        "format": "markdown",
        "sha256": "693c8d64bac500b5ba93dc4e673f226c875973ca5412149c4696f4a8665fe934"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance intermediate node and the approximately −1 gain across the lower device’s feedback capacitance, giving roughly 2Cf rather than multiplication by the full stage gain. The remaining observations are consistent with the cascode explanation.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2071,
        "total_tokens": 2090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1771,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2071,
        "total_tokens": 2090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1771,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "A cascode reduces the Miller effect because **the input transistor’s feedback capacitance does not see the amplifier’s full voltage gain**.\n\nIn a common-source amplifier, the gate–drain capacitance \\(C_{gd}\\) connects the input to the high-gain, inverting output. Its equivalent input-capacitance contribution is\n\\[\nC_{\\text{in,M}}=C_{gd}(1-A_v)\n=C_{gd}(1+|A_v|).\n\\]\nThus, a large voltage gain makes a small parasitic capacitance appear much larger at the input.\n\nIn a cascode:\n- The lower transistor operates in **common-source**, and the upper transistor in **common-gate**.\n- The upper transistor presents a relatively low impedance at the lower transistor’s drain, limiting that node’s voltage swing.\n- The large output swing occurs at the **upper transistor’s drain**, not across the lower transistor’s \\(C_{gd}\\).\n\nConsequently, the lower transistor’s \\(C_{gd}\\) is multiplied only by the **local gain to the intermediate node**, which is much smaller than the overall gain—often only of order unity. The upper transistor’s \\(C_{gd}\\) connects the output to its AC-grounded gate, so it loads the output rather than feeding the output signal back to the input.\n\nThe result is high overall gain with much less Miller-enlarged input capacitance, improving high-frequency performance. The same reasoning applies to a BJT cascode using common-emitter/common-base stages and \\(C_{bc}\\).",
        "format": "markdown",
        "sha256": "87028e45986333e7e6207a9abc8202bc816ea3eb1b7bfc58ca2a21ef93884685"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance intermediate node in the cascode and explains that the gain across the lower transistor’s Cgd is only of order unity, rather than the full stage gain. The resulting reduction in Miller multiplication is accurately described.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2911,
        "total_tokens": 2930,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2911,
        "total_tokens": 2930,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit function\n\nThis is an **NMOS common-gate amplifier with a PMOS current-source load**:\n\n- \\(M_2\\): the input is applied to its **source**, its gate is held at \\(V_{b1}\\), and its drain is the output.\n- \\(M_1\\): a PMOS active load whose current is controlled by \\(V_{b2}\\).\n\nThe voltage gain is **positive**. Increasing \\(V_{\\text{in}}\\) reduces \\(V_{GS2}\\), so \\(M_2\\) initially draws less current and \\(M_1\\) pulls the output voltage upward.\n\nThe following analysis assumes low-frequency operation and both transistors in saturation.\n\n## 2. DC bias and output range\n\nNeglecting body effect, define the overdrive voltages\n\\[\nV_{OV1}=V_{DD}-V_{b2}-|V_{TP}|,\\qquad\nV_{OV2}=V_{b1}-V_{\\text{in},Q}-V_{TN}.\n\\]\n\nBoth must be positive. Ignoring channel-length modulation in the first-order bias calculation,\n\\[\nI_Q\\approx \\frac{\\beta_1}{2}V_{OV1}^{2}\n          =\\frac{\\beta_2}{2}V_{OV2}^{2},\n\\]\nwhere \\(\\beta_i=\\mu_i C_{\\text{ox}}(W/L)_i\\). Thus,\n\\[\nV_{\\text{in},Q}\\approx\nV_{b1}-V_{TN}-\\sqrt{\\frac{2I_Q}{\\beta_2}}.\n\\]\n\nThe source driving \\(V_{\\text{in}}\\) must also provide a return path for this DC bias current.\n\nFor saturation:\n\\[\nM_2:\\quad V_{\\text{out},Q}-V_{\\text{in},Q}\\ge V_{OV2},\n\\]\n\\[\nM_1:\\quad V_{DD}-V_{\\text{out},Q}\\ge V_{OV1}.\n\\]\n\nConsequently, the allowable output range is\n\\[\n\\boxed{V_{b1}-V_{TN}\\le V_{\\text{out},Q}\n\\le V_{b2}+|V_{TP}|.}\n\\]\n\nIf channel-length modulation is neglected entirely, the current equations do not uniquely determine the output voltage within this range.\n\n## 3. Small-signal voltage gain\n\nTreat \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) as AC grounds. Initially neglect body effect and capacitances.\n\n- \\(M_1\\) contributes \\(r_{o1}\\) from the output to AC ground.\n- For \\(M_2\\), \\(v_{gs2}=-v_{\\text{in}}\\).\n- \\(r_{o2}\\) lies between the output and input nodes.\n\nKCL at the output gives\n\\[\n\\frac{v_{\\text{out}}}{r_{o1}}\n+\\frac{v_{\\text{out}}-v_{\\text{in}}}{r_{o2}}\n-g_{m2}v_{\\text{in}}=0.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_{m2}+1/r_{o2}}{1/r_{o1}+1/r_{o2}}\n}\n\\]\n\nFor \\(g_{m2}r_{o2}\\gg1\\),\n\\[\n\\boxed{A_v\\approx +g_{m2}(r_{o1}\\parallel r_{o2}).}\n\\]\n\nNotice that \\(g_{m1}\\) does not appear: both the gate and source of \\(M_1\\) are at AC ground.\n\n## 4. Input and output resistances\n\nWith no external output load, the low-frequency input resistance is\n\\[\n\\boxed{\nR_{\\text{in}}=\n\\frac{r_{o1}+r_{o2}}{1+g_{m2}r_{o2}}.\n}\n\\]\n\nThe current-source load matters here. For example, if \\(r_{o1}=r_{o2}=r_o\\) and \\(g_{m2}r_o\\gg1\\),\n\\[\nR_{\\text{in}}\\approx \\frac{2}{g_{m2}}.\n\\]\n\nWith the input driven by an ideal voltage source, the output resistance is\n\\[\n\\boxed{R_{\\text{out}}=r_{o1}\\parallel r_{o2}.}\n\\]\n\n**Body-effect correction:** If \\(M_2\\)'s body is at AC ground, replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\) in the gain and input-resistance formulas.",
        "format": "markdown",
        "sha256": "e7e4099f40f3110ba4364ffbf628b1cd230dacf9cd82376ac1c69881d161309d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, source-driven input, bias voltages, non-inverting gain, and low input resistance. The gain and resistance expressions are consistent with the stated assumptions.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 7228,
        "total_tokens": 8452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 7228,
        "total_tokens": 8452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit type\n\nThis is an **NMOS common-gate amplifier with a PMOS current-source load**:\n\n- \\(M_2\\): input at its **source**, gate biased at \\(V_{b1}\\), output at its drain.\n- \\(M_1\\): PMOS active load, with its source at \\(V_{DD}\\) and gate biased at \\(V_{b2}\\).\n\nAssume ideal bias-voltage sources, no external output load, and both transistors operating in saturation. Initially neglect body effect and capacitances.\n\n## 1. DC operating conditions\n\nThe overdrive voltages are\n\\[\nV_{OV1}=V_{DD}-V_{b2}-|V_{TP}|,\\qquad\nV_{OV2}=V_{b1}-V_{\\text{in},Q}-V_{TN},\n\\]\nand both must be positive.\n\nThe two devices carry the same bias current. Using the long-channel square-law approximation,\n\\[\nI_D\\approx \\frac{\\beta_p}{2}V_{OV1}^{\\,2}\n       =\\frac{\\beta_n}{2}V_{OV2}^{\\,2},\n\\]\nwhere \\(\\beta=\\mu C_{\\rm ox}(W/L)\\) for the corresponding device.\n\nSaturation requires\n\\[\nV_{DD}-V_{\\text{out},Q}\\ge V_{OV1},\n\\qquad\nV_{\\text{out},Q}-V_{\\text{in},Q}\\ge V_{OV2}.\n\\]\nThus the output must remain within\n\\[\n\\boxed{V_{b1}-V_{TN}\\le V_{\\text{out},Q}\n\\le V_{b2}+|V_{TP}|.}\n\\]\n\nWith ideal current-source models—zero channel-length modulation—the saturation equations alone do not uniquely determine the DC output voltage.\n\n## 2. Small-signal voltage gain\n\nSince the gate and source of \\(M_1\\) are AC-grounded, it contributes only its output resistance \\(r_{o1}\\). For \\(M_2\\),\n\\[\nv_{gs2}=-v_{\\text{in}},\\qquad\nv_{ds2}=v_{\\text{out}}-v_{\\text{in}}.\n\\]\n\nKCL at the output gives\n\\[\n\\frac{v_{\\text{out}}}{r_{o1}}\n+\\frac{v_{\\text{out}}-v_{\\text{in}}}{r_{o2}}\n-g_{m2}v_{\\text{in}}=0.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_{m2}+1/r_{o2}}{1/r_{o1}+1/r_{o2}}\n}\n\\]\nor, when \\(g_{m2}r_{o2}\\gg1\\),\n\\[\n\\boxed{A_v\\approx +g_{m2}(r_{o1}\\parallel r_{o2}).}\n\\]\n\nThe amplifier is **non-inverting**: increasing \\(V_{\\text{in}}\\) reduces \\(V_{GS2}\\), weakening \\(M_2\\)'s sink current and allowing the output voltage to rise.\n\n## 3. Input and output resistances\n\nWith the input voltage held fixed,\n\\[\n\\boxed{R_{\\text{out}}=r_{o1}\\parallel r_{o2}.}\n\\]\n\nFor the unloaded output shown, the input resistance looking into \\(M_2\\)'s source is\n\\[\n\\boxed{\nR_{\\text{in}}=\n\\frac{r_{o1}+r_{o2}}{1+g_{m2}r_{o2}}.\n}\n\\]\nIts value depends on the drain loading. For example, if \\(r_{o1}=r_{o2}\\) and \\(g_{m2}r_{o2}\\gg1\\), then \\(R_{\\text{in}}\\approx2/g_{m2}\\).\n\nIf \\(M_2\\)'s body is AC-grounded, **include body effect by replacing \\(g_{m2}\\) with \\(g_{m2}+g_{mb2}\\)** in the gain and input-resistance formulas.",
        "format": "markdown",
        "sha256": "edc0793d845ff7cf33222bcb45094338f929a053248801ed2c179546fad07146"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stage, source input, PMOS current-source load, non-inverting gain, and low input resistance. The gain and input-resistance expressions are consistent with the topology; the additional operating-point and body-effect details do not contradict the essential answer.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 6591,
        "total_tokens": 7815,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 6591,
        "total_tokens": 7815,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nThis is an **NMOS common-gate amplifier with a PMOS current-source load**:\n\n- \\(M_2\\): source connected to \\(V_{\\text{in}}\\), gate fixed at \\(V_{b1}\\), and drain connected to \\(V_{\\text{out}}\\).\n- \\(M_1\\): PMOS load supplying bias current from \\(V_{DD}\\), with its gate fixed at \\(V_{b2}\\).\n\nAssume ideal bias-voltage sources, low-frequency operation, and initially neglect body effect.\n\n## 2. DC operating conditions\n\nDefine the overdrive voltages\n\\[\nV_{OV1}=V_{DD}-V_{b2}-|V_{TP1}|,\n\\qquad\nV_{OV2}=V_{b1}-V_{\\text{in},Q}-V_{TN2}.\n\\]\n\nBoth must be positive for the transistors to conduct. With no external DC output load,\n\\[\nI_{D1}=I_{D2}=I_Q.\n\\]\n\nUsing the square-law approximation,\n\\[\nI_Q\\approx \\frac{\\beta_1}{2}V_{OV1}^{2}\n       \\approx \\frac{\\beta_2}{2}V_{OV2}^{2},\n\\qquad\n\\beta_i=\\mu_iC_{\\mathrm{ox}}(W/L)_i.\n\\]\n\nFor both transistors to remain in saturation,\n\\[\nV_{\\text{out},Q}-V_{\\text{in},Q}\\ge V_{OV2},\n\\qquad\nV_{DD}-V_{\\text{out},Q}\\ge V_{OV1}.\n\\]\n\nEquivalently, the allowable output range is\n\\[\n\\boxed{\nV_{b1}-V_{TN2}\n\\le V_{\\text{out},Q}\n\\le V_{b2}+|V_{TP1}|\n}.\n\\]\n\nThe exact output bias requires current balance including channel-length modulation. If both devices are modeled as ideal saturation-region current sources, matching their currents does not determine a unique output voltage.\n\n## 3. Small-signal voltage gain\n\nSince \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are AC grounds:\n\n- \\(M_1\\) contributes its output resistance \\(r_{o1}\\).\n- For \\(M_2\\), \\(v_{gs2}=-v_{\\text{in}}\\).\n\nKCL at the output gives\n\\[\n\\frac{v_{\\text{out}}}{r_{o1}}\n+\\frac{v_{\\text{out}}-v_{\\text{in}}}{r_{o2}}\n-g_{m2}v_{\\text{in}}=0.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\left(g_{m2}+\\frac{1}{r_{o2}}\\right)\n(r_{o1}\\parallel r_{o2})\n}.\n\\]\n\nFor \\(g_{m2}r_{o2}\\gg1\\),\n\\[\n\\boxed{A_v\\approx +g_{m2}(r_{o1}\\parallel r_{o2})}.\n\\]\n\nThe amplifier is **non-inverting**: increasing the input source voltage reduces \\(V_{GS2}\\), initially reducing the current drawn from the output and causing its voltage to rise.\n\n## 4. Input and output resistances\n\nWith the input driven by an ideal voltage source, setting its small-signal voltage to zero gives\n\\[\n\\boxed{R_{\\text{out}}=r_{o1}\\parallel r_{o2}}.\n\\]\n\nLooking into the input, with the output externally unloaded,\n\\[\n\\boxed{\nR_{\\text{in}}\n=\\frac{r_{o1}+r_{o2}}{1+g_{m2}r_{o2}}\n}.\n\\]\n\nThus, \\(R_{\\text{in}}\\) depends on the active load; it is not always simply \\(1/g_{m2}\\). For example, if \\(r_{o1}=r_{o2}\\) and \\(g_{m2}r_{o2}\\gg1\\), then \\(R_{\\text{in}}\\approx2/g_{m2}\\).\n\nIf \\(M_2\\)'s bulk is at AC ground, include body effect by replacing \\(g_{m2}\\) with \\(g_{m2}+g_{mb2}\\) in the gain and input-resistance expressions. Numerical results require the bias voltages and transistor parameters.",
        "format": "markdown",
        "sha256": "1ab3d4c41676ee54fcb1e48f97f8563a13dd485a07b7b24e3fc591ab347a9bdf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, source-driven input and fixed bias voltages, non-inverting gain, and low input resistance. The gain expression is equivalent to the required approximation; the additional bias and resistance analysis is consistent.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 6206,
        "total_tokens": 7430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 6206,
        "total_tokens": 7430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **\\(\\boxed{2\\text{ poles}}\\)**.\n\nThere are two independent dynamic nodes:\n1. The gate of \\(M_1\\), after \\(R_S\\).\n2. The output node \\(V_{\\text{out}}\\).\n\nThe capacitors \\(C_{DB}\\), \\(C_{DB2}\\), and \\(C_{GD2}\\) are all connected from the output to AC ground, so they combine in parallel. \\(C_{GD}\\) couples the two existing nodes but does not introduce another independent state. Thus, the transfer-function denominator is second order.",
        "format": "markdown",
        "sha256": "15bebda856574f72e6d09d72206ede751cd038d1f4224167d9fa50075c10b1c5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent dynamic nodes and explains that CGD couples them without adding another pole; the output capacitances are assigned to the right node.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 1100,
        "total_tokens": 2841,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 972,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 1100,
        "total_tokens": 2841,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 972,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**, corresponding to its two independent dynamic nodes:\n\n1. The gate of \\(M_1\\).\n2. The output node \\(V_{\\text{out}}\\).\n\nSince \\(M_2\\)’s gate and source are at AC ground, \\(C_{GD2}\\), \\(C_{DB2}\\), and \\(C_{DB}\\) are effectively in parallel from the output to ground. \\(C_{GD}\\) couples the two dynamic nodes but does not create a third independent state. Thus, the transfer-function denominator is second order.",
        "format": "markdown",
        "sha256": "34b61dc143f8f26cb8417cec441800e54f0a3b7a8299a4a6f4faacca06a1656f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the gate and output as the two dynamic nodes, assigns the output capacitances correctly, and explains that CGD couples the nodes without adding a third pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 1240,
        "total_tokens": 2981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 1240,
        "total_tokens": 2981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**, corresponding to its two independent dynamic nodes:\n\n1. The gate of \\(M_1\\), after \\(R_S\\).\n2. The output node \\(V_{\\text{out}}\\).\n\nSince \\(M_2\\)’s gate is AC-grounded, \\(C_{GD2}\\), \\(C_{DB2}\\), and \\(C_{DB}\\) are effectively in parallel from the output to ground. \\(C_{GD}\\) couples the two existing nodes but does not introduce another independent state.\n\nThus, despite having five capacitors, the circuit is **second order**.",
        "format": "markdown",
        "sha256": "de69296116fbf66ec1f4b2d37a8a1f08e6439b370d2ad0aff0b09b7576bef485"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two dynamic nodes—the M1 gate and output—and assigns the output-to-ground capacitances correctly. CGD couples the nodes without adding another independent state.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 1165,
        "total_tokens": 2906,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 1165,
        "total_tokens": 2906,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **resistively loaded, gate-tied NMOS stack**. Its key feature is that, when both devices conduct, **the lower transistor \\(M_1\\) is in triode—not saturation**.\n\nAssume long-channel NMOS devices with the same threshold \\(V_T\\), neglecting body effect and channel-length modulation. Define\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}\\left(\\frac WL\\right)_i,\\qquad\nU=V_{\\mathrm{in}}-V_T,\n\\]\nand let \\(V_X\\) be the voltage between \\(M_1\\) and \\(M_2\\).\n\n## 1. Operating regions\n\nThe transistor voltages are\n\\[\n\\begin{aligned}\nM_1:&\\quad V_{GS1}=V_{\\mathrm{in}},\\quad V_{DS1}=V_X,\\\\\nM_2:&\\quad V_{GS2}=V_{\\mathrm{in}}-V_X,\\quad\nV_{DS2}=V_{\\mathrm{out}}-V_X.\n\\end{aligned}\n\\]\n\nFor \\(M_2\\) to conduct,\n\\[\nV_{\\mathrm{in}}-V_X>V_T\n\\quad\\Rightarrow\\quad V_X<U.\n\\]\nBut saturation of \\(M_1\\) would require \\(V_X\\ge U\\). Therefore, **\\(M_1\\) must operate in triode whenever \\(M_2\\) conducts**.\n\nFor \\(M_2\\), the saturation condition is\n\\[\nV_{\\mathrm{out}}-V_X\\ge V_{\\mathrm{in}}-V_X-V_T\n\\quad\\Rightarrow\\quad\n\\boxed{V_{\\mathrm{out}}\\ge U.}\n\\]\n\nThus:\n\n| Condition | Operation |\n|---|---|\n| \\(V_{\\mathrm{in}}\\le V_T\\) | No appreciable current; \\(V_{\\mathrm{out}}\\approx V_{DD}\\) |\n| \\(V_{\\mathrm{in}}>V_T,\\ V_{\\mathrm{out}}\\ge U\\) | \\(M_1\\) triode, \\(M_2\\) saturation |\n| \\(V_{\\mathrm{in}}>V_T,\\ V_{\\mathrm{out}}<U\\) | Both transistors triode |\n\n## 2. DC solution with \\(M_2\\) saturated\n\nThe same drain current flows through both devices:\n\\[\nI_D=\\beta_1\\left(UV_X-\\frac{V_X^2}{2}\\right)\n=\\frac{\\beta_2}{2}(U-V_X)^2.\n\\]\n\nSolving for the internal-node voltage gives\n\\[\n\\boxed{\nV_X=U\\left(1-\\sqrt{\\frac{\\beta_1}{\\beta_1+\\beta_2}}\\right).\n}\n\\]\n\nDefine the effective device parameter\n\\[\n\\boxed{\\beta_{\\mathrm{eq}}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}.}\n\\]\nThen\n\\[\n\\boxed{I_D=\\frac{\\beta_{\\mathrm{eq}}}{2}(V_{\\mathrm{in}}-V_T)^2}\n\\]\nand\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{DD}-\\frac{\\beta_{\\mathrm{eq}}R_D}{2}(V_{\\mathrm{in}}-V_T)^2.\n}\n\\]\nThis solution is valid while the calculated \\(V_{\\mathrm{out}}\\ge V_{\\mathrm{in}}-V_T\\).\n\n### Identical transistors\n\nIf \\(\\beta_1=\\beta_2=\\beta\\),\n\\[\nV_X=\\left(1-\\frac1{\\sqrt2}\\right)U\\approx0.293U,\n\\]\n\\[\n\\boxed{I_D=\\frac{\\beta}{4}U^2,\\qquad\nV_{\\mathrm{out}}=V_{DD}-\\frac{\\beta R_D}{4}U^2.}\n\\]\n\nThe pair therefore behaves, in this ideal model, like one transistor with \\(\\beta_{\\mathrm{eq}}=\\beta/2\\): the same width and **twice the channel length**.\n\n## 3. Small-signal voltage gain\n\nAround a bias point with \\(M_2\\) saturated,\n\\[\ng_{m,\\mathrm{eq}}\n=\\frac{\\partial I_D}{\\partial V_{\\mathrm{in}}}\n=\\beta_{\\mathrm{eq}}(V_{\\mathrm{in},Q}-V_T).\n\\]\nHence\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=-\\beta_{\\mathrm{eq}}R_D(V_{\\mathrm{in},Q}-V_T).\n}\n\\]\n\nFor identical devices,\n\\[\n\\boxed{A_v=-\\frac{\\beta R_D}{2}(V_{\\mathrm{in},Q}-V_T).}\n\\]\n\nThe ideal low-frequency input resistance is infinite, and the output resistance in this region is \\(R_D\\), since channel-length modulation was neglected.\n\n## 4. When both devices are in triode\n\nFor \\(0\\le V_{\\mathrm{out}}<U\\), equating their currents gives\n\\[\nI_D=\\beta_{\\mathrm{eq}}\n\\left(UV_{\\mathrm{out}}-\\frac{V_{\\mathrm{out}}^2}{2}\\right).\n\\]\nThe output follows from\n\\[\n\\boxed{\n\\frac{V_{DD}-V_{\\mathrm{out}}}{R_D}\n=\\beta_{\\mathrm{eq}}\n\\left[(V_{\\mathrm{in}}-V_T)V_{\\mathrm{out}}\n-\\frac{V_{\\mathrm{out}}^2}{2}\\right].\n}\n\\]\n\nThus the circuit acts as an **inverting amplifier or resistively loaded inverter**, rather than a conventional cascode with both transistors saturated.",
        "format": "markdown",
        "sha256": "6529cca3e5f49df59499ba62da1d22ae2ac18bb9f501ab00b96dda5824be8ed6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stack, shows that M1 is in triode while M2 is saturated in the usual operating region, and derives the equivalent device parameter. For identical devices it correctly concludes that the pair behaves like one transistor with twice the channel length; the added analysis is consistent with its stated ideal assumptions.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 8966,
        "total_tokens": 10394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 8966,
        "total_tokens": 10394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **resistively loaded, inverting NMOS stage with two gate-tied transistors**. The key point is that, for equal threshold voltages, **the two transistors cannot both operate in saturation while carrying current**.\n\nAssume long-channel NMOS devices with a common threshold \\(V_T\\), and neglect body effect and channel-length modulation. Define\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}\\left(\\frac WL\\right)_i,\n\\qquad U=V_{\\mathrm{in}}-V_T,\n\\]\nand let \\(V_X\\) be the junction between \\(M_1\\) and \\(M_2\\).\n\n## 1. Operating regions\n\nThe terminal voltages are\n\\[\n\\begin{array}{c|cc}\n&V_{GS}&V_{DS}\\\\ \\hline\nM_1&V_{\\mathrm{in}}&V_X\\\\\nM_2&V_{\\mathrm{in}}-V_X&V_{\\mathrm{out}}-V_X\n\\end{array}\n\\]\n\nFor \\(M_2\\) to conduct,\n\\[\nV_{\\mathrm{in}}-V_X>V_T\n\\quad\\Rightarrow\\quad V_X<U.\n\\]\nBut saturation of \\(M_1\\) would require \\(V_X\\ge U\\). Thus:\n\n- \\(V_{\\mathrm{in}}\\le V_T\\): the stack is off, so \\(V_{\\mathrm{out}}=V_{DD}\\).\n- When the stack conducts, **\\(M_1\\) operates in triode**.\n- \\(M_2\\) is saturated when\n  \\[\n  V_{\\mathrm{out}}-V_X\\ge V_{\\mathrm{in}}-V_X-V_T\n  \\quad\\Rightarrow\\quad\n  \\boxed{V_{\\mathrm{out}}\\ge U}.\n  \\]\n- If \\(V_{\\mathrm{out}}<U\\), both devices are in triode.\n\n## 2. DC current and output voltage\n\n### With \\(M_2\\) saturated\n\nBoth devices carry the same current:\n\\[\nI_D=\\beta_1\\left(UV_X-\\frac{V_X^2}{2}\\right)\n=\\frac{\\beta_2}{2}(U-V_X)^2.\n\\]\n\nSolving gives\n\\[\n\\boxed{V_X=U\\left(1-\\sqrt{\\frac{\\beta_1}{\\beta_1+\\beta_2}}\\right)}\n\\]\nand\n\\[\n\\boxed{I_D=\\frac12\\beta_{\\mathrm{eq}}U^2},\n\\qquad\n\\boxed{\\beta_{\\mathrm{eq}}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}}.\n\\]\n\nConsequently,\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{DD}-\\frac{\\beta_{\\mathrm{eq}}R_D}{2}\n(V_{\\mathrm{in}}-V_T)^2\n}\n\\]\nprovided the resulting output satisfies \\(V_{\\mathrm{out}}\\ge V_{\\mathrm{in}}-V_T\\).\n\nFor **identical transistors**, \\(\\beta_1=\\beta_2=\\beta\\):\n\\[\n\\boxed{\nV_X=\\left(1-\\frac1{\\sqrt2}\\right)(V_{\\mathrm{in}}-V_T)\n\\approx0.293(V_{\\mathrm{in}}-V_T)\n}\n\\]\n\\[\n\\boxed{\nI_D=\\frac{\\beta}{4}(V_{\\mathrm{in}}-V_T)^2,\\qquad\nV_{\\mathrm{out}}=V_{DD}\n-\\frac{\\beta R_D}{4}(V_{\\mathrm{in}}-V_T)^2\n}.\n\\]\n\n### With both devices in triode\n\nEquating their triode currents gives\n\\[\n\\boxed{\nI_D=\\beta_{\\mathrm{eq}}\n\\left(UV_{\\mathrm{out}}-\\frac{V_{\\mathrm{out}}^2}{2}\\right)\n}.\n\\]\nTogether with\n\\[\nI_D=\\frac{V_{DD}-V_{\\mathrm{out}}}{R_D},\n\\]\nthis determines the low-output portion of the transfer characteristic.\n\nThus, under these assumptions, the stack has the DC behavior of **one NMOS with parameter \\(\\beta_{\\mathrm{eq}}\\)**. For identical devices of width \\(W\\) and length \\(L\\), this corresponds to a transistor of width \\(W\\) and length \\(2L\\).\n\n## 3. Small-signal voltage gain\n\nAt a bias point where \\(M_2\\) is saturated,\n\\[\ng_{m,\\mathrm{eq}}\n=\\frac{\\partial I_D}{\\partial V_{\\mathrm{in}}}\n=\\beta_{\\mathrm{eq}}(V_{\\mathrm{in},Q}-V_T).\n\\]\nTherefore,\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=-\\beta_{\\mathrm{eq}}R_D(V_{\\mathrm{in},Q}-V_T)\n=-\\frac{2I_{D,Q}R_D}{V_{\\mathrm{in},Q}-V_T}\n}.\n\\]\n\nFor identical devices,\n\\[\n\\boxed{A_v=-\\frac{\\beta R_D}{2}(V_{\\mathrm{in},Q}-V_T)}.\n\\]\n\nThe ideal low-frequency input resistance is infinite, and the output resistance in this operating region is \\(R_D\\) when channel-length modulation is neglected.\n\n**Bottom line:** this gate-tied stack, often called a *self-cascode* or composite transistor, must not be analyzed as a conventional cascode with both devices saturated. Body effect and channel-length modulation modify the ideal results above.",
        "format": "markdown",
        "sha256": "e435488e949c2da357f9724b777ed1156eac3bf24f8261b42f447b85d5699a52"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series stack, shows the lower device operates in triode, and derives the equivalent device parameter. For equal widths it reaches the key conclusion that the stack behaves like one NMOS of length 2L; the ideal-model assumptions are stated.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 9345,
        "total_tokens": 10773,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8135,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 9345,
        "total_tokens": 10773,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8135,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **resistor-loaded inverting NMOS stage** with two series transistors driven by the same input. The key point is that it is **not a conventional cascode**: with equal thresholds, both transistors cannot simultaneously conduct in saturation.\n\nAssume a common threshold \\(V_T\\), long-channel square-law behavior, and negligible body effect and channel-length modulation. Define\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}(W/L)_i,\n\\]\nand let \\(V_X\\) be the node between \\(M_1\\) and \\(M_2\\).\n\n## 1. Operating regions\n\nFor \\(V_{\\mathrm{in}}\\le V_T\\), the stack is off:\n\\[\nI_D=0,\\qquad V_{\\mathrm{out}}=V_{DD}.\n\\]\n\nFor \\(V_{\\mathrm{in}}>V_T\\), define\n\\[\nU=V_{\\mathrm{in}}-V_T.\n\\]\n\nFor \\(M_2\\) to conduct,\n\\[\nV_{GS2}>V_T\n\\quad\\Rightarrow\\quad\nV_X<U.\n\\]\nBut saturation of \\(M_1\\) would require \\(V_X\\ge U\\). Thus:\n\n\\[\n\\boxed{M_1\\text{ must be in triode whenever the stack conducts.}}\n\\]\n\nFor \\(M_2\\), the saturation condition is\n\\[\nV_{\\mathrm{out}}-V_X\\ge V_{\\mathrm{in}}-V_X-V_T,\n\\]\nor simply\n\\[\n\\boxed{V_{\\mathrm{out}}\\ge U.}\n\\]\n\n## 2. DC operation with \\(M_2\\) saturated\n\nThe same current flows through both devices:\n\\[\nI_D=\\beta_1\\left(UV_X-\\frac{V_X^2}{2}\\right)\n=\\frac{\\beta_2}{2}(U-V_X)^2.\n\\]\n\nSolving gives\n\\[\nV_X=U\\left(1-\\sqrt{\\frac{\\beta_1}{\\beta_1+\\beta_2}}\\right),\n\\]\nand\n\\[\n\\boxed{I_D=\\frac{\\beta_{\\mathrm{eq}}}{2}U^2},\n\\qquad\n\\beta_{\\mathrm{eq}}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}.\n\\]\n\nTherefore,\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{DD}-\\frac{\\beta_{\\mathrm{eq}}R_D}{2}\n(V_{\\mathrm{in}}-V_T)^2\n}\n\\]\nprovided \\(V_{\\mathrm{out}}\\ge V_{\\mathrm{in}}-V_T\\).\n\nFor **identical transistors**, \\(\\beta_1=\\beta_2=\\beta\\):\n\\[\n\\boxed{\nV_X=\\left(1-\\frac{1}{\\sqrt2}\\right)U,\\qquad\nI_D=\\frac{\\beta}{4}U^2\n}\n\\]\nand\n\\[\nV_{\\mathrm{out}}=V_{DD}-\\frac{\\beta R_D}{4}U^2.\n\\]\n\n## 3. Small-signal voltage gain\n\nAt a bias point where \\(M_2\\) is saturated,\n\\[\ng_{m,\\mathrm{eq}}\n=\\frac{\\partial I_D}{\\partial V_{\\mathrm{in}}}\n=\\beta_{\\mathrm{eq}}U.\n\\]\n\nHence the low-frequency, unloaded gain is\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=-\\beta_{\\mathrm{eq}}UR_D\n=-\\frac{2I_DR_D}{U}.\n}\n\\]\n\nFor identical devices,\n\\[\n\\boxed{A_v=-\\frac{\\beta R_D}{2}(V_{\\mathrm{in}}-V_T).}\n\\]\n\nUnder the stated idealizations,\n\\[\nR_{\\mathrm{in}}\\to\\infty,\\qquad R_{\\mathrm{out}}=R_D.\n\\]\n\n## 4. Larger input: both devices in triode\n\nWhen \\(V_{\\mathrm{out}}<U\\), \\(M_2\\) also enters triode. The stack current becomes\n\\[\nI_D=\\beta_{\\mathrm{eq}}\n\\left(UV_{\\mathrm{out}}-\\frac{V_{\\mathrm{out}}^2}{2}\\right),\n\\]\nwith the output determined by\n\\[\n\\frac{V_{DD}-V_{\\mathrm{out}}}{R_D}=I_D.\n\\]\n\n**Interpretation:** In this ideal model, the series pair behaves like one NMOS with parameter \\(\\beta_{\\mathrm{eq}}\\). For two identical devices of width \\(W\\) and length \\(L\\), this is equivalent to a single device with width \\(W\\) and length \\(2L\\).",
        "format": "markdown",
        "sha256": "6a12e421f04ba030ccab6976998c3256ee6205ea1706622f64efebb22dd64401"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS pair, places the lower device in triode and the upper in saturation, and derives the equivalent parameter βeq = β1β2/(β1+β2). For identical devices this is β/2, equivalent to a single device with twice the channel length, matching the essential answer.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 8042,
        "total_tokens": 9470,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7018,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 8042,
        "total_tokens": 9470,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7018,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **source-coupled NMOS pair** with one input fixed at \\(V_b\\). Taking the output from \\(M_2\\) makes the response to \\(V_{\\text{in}}\\) **noninverting**.\n\nAssume an ideal tail-current source \\(I_1\\), both transistors in saturation, and initially neglect channel-length modulation and body effect.\n\n## 1. DC operating point\n\nLet \\(V_S\\) be the common-source voltage. Since the tail current is fixed,\n\\[\nI_{D1}+I_{D2}=I_1,\n\\qquad\nV_{\\text{out}}=V_{DD}-I_{D2}R_D.\n\\]\n\nFor matched transistors with \\(V_{\\text{in}}=V_b\\),\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2},\n\\]\nso\n\\[\n\\boxed{V_{\\text{out},Q}=V_{DD}-\\frac{I_1R_D}{2}}.\n\\]\n\nUsing the square-law model\n\\[\nI_D=\\frac{\\beta}{2}(V_{GS}-V_{TN})^2,\n\\qquad\n\\beta=\\mu_nC_{\\text{ox}}\\frac WL,\n\\]\nthe balanced-point overdrive and transconductance are\n\\[\nV_{\\text{OV}}=\\sqrt{\\frac{I_1}{\\beta}},\n\\qquad\ng_m=\\sqrt{\\beta I_1},\n\\]\nand\n\\[\nV_{S,Q}=V_b-V_{TN}-V_{\\text{OV}}.\n\\]\n\n## 2. Small-signal voltage gain\n\nFor small signals, \\(V_{DD}\\) and \\(V_b\\) are AC grounds, while the ideal current source is an open circuit. Thus, the incremental drain currents must sum to zero:\n\\[\ni_{d1}+i_{d2}=0.\n\\]\n\nWriting\n\\[\ni_{d1}=g_{m1}(v_{\\text{in}}-v_s),\n\\qquad\ni_{d2}=-g_{m2}v_s,\n\\]\ngives\n\\[\nv_s=\\frac{g_{m1}}{g_{m1}+g_{m2}}v_{\\text{in}}.\n\\]\n\nSince\n\\[\nv_{\\text{out}}=-R_Di_{d2}=g_{m2}R_Dv_s,\n\\]\nthe voltage gain is\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D\n}.\n\\]\n\nFor matched transistors at the balanced bias point,\n\\[\n\\boxed{A_v=+\\frac{g_mR_D}{2}}.\n\\]\n\n**Physical interpretation:** increasing \\(V_{\\text{in}}\\) increases \\(I_{D1}\\). Because their sum is fixed, \\(I_{D2}\\) decreases, reducing the drop across \\(R_D\\) and raising \\(V_{\\text{out}}\\).\n\n## 3. Input and output resistances\n\nUnder the initial idealizations,\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty},\n\\qquad\n\\boxed{R_{\\text{out}}\\approx R_D}.\n\\]\n\nIf channel-length modulation is included, and the two transistors have equal small-signal \\(g_m\\) and \\(r_o\\), the ideal-tail results become\n\\[\n\\boxed{R_{\\text{out}}=R_D\\parallel 2r_o},\n\\qquad\n\\boxed{A_v=\\frac{g_m}{2}\\left(R_D\\parallel 2r_o\\right)}.\n\\]\n\n## 4. Large-signal behavior and operating limits\n\nThe input steers the tail current between the two branches:\n\n- **Low \\(V_{\\text{in}}\\):** \\(M_1\\) approaches cutoff, \\(I_{D2}\\to I_1\\), and\n  \\[\n  V_{\\text{out}}\\to V_{DD}-I_1R_D.\n  \\]\n- **High \\(V_{\\text{in}}\\):** \\(M_2\\) approaches cutoff, \\(I_{D2}\\to0\\), and\n  \\[\n  V_{\\text{out}}\\to V_{DD}.\n  \\]\n\nThus, the ideal current-steering output range is\n\\[\nV_{DD}-I_1R_D\\le V_{\\text{out}}\\le V_{DD}.\n\\]\n\nThe small-signal gain applies only while both devices are on and saturated. Their saturation conditions are\n\\[\nM_1:\\quad V_{DD}\\ge V_{\\text{in}}-V_{TN},\n\\]\n\\[\nM_2:\\quad V_{\\text{out}}\\ge V_b-V_{TN}.\n\\]\nA practical tail-current source also needs sufficient voltage at \\(V_S\\) to maintain \\(I_1\\), so the usable linear swing can be smaller than the ideal range.",
        "format": "markdown",
        "sha256": "8d69b0c3d97edf79951f9e6ec224344f10d298fa5cbe1f94f2ee4383e711d60a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair with M2 biased at Vb and the output at its drain, and derives the correct noninverting gain. The additional bias and operating-limit analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 10021,
        "total_tokens": 12316,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8942,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 10021,
        "total_tokens": 12316,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8942,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS differential pair with a single-ended output**, where \\(V_b\\) is a fixed reference. Equivalently, \\(M_1\\) acts as a source follower driving the common-gate transistor \\(M_2\\).\n\nAssume an ideal tail current source \\(I_1\\), both transistors operating in saturation, and initially neglect channel-length modulation and body effect.\n\n## 1. DC operating point\n\nLet \\(V_S\\) be the common-source voltage. The tail current divides between the transistors:\n\n\\[\nI_{D1}+I_{D2}=I_1,\n\\qquad\nV_{\\text{out}}=V_{DD}-I_{D2}R_D.\n\\]\n\nThe current split depends on \\(V_{\\text{in}}-V_b\\) and the device parameters. For **matched transistors biased at \\(V_{\\text{in},Q}=V_b\\)**,\n\n\\[\nI_{D1,Q}=I_{D2,Q}=\\frac{I_1}{2},\n\\]\n\nso\n\n\\[\n\\boxed{V_{\\text{out},Q}=V_{DD}-\\frac{I_1R_D}{2}}.\n\\]\n\nThe common-source bias voltage is\n\n\\[\nV_{S,Q}=V_b-V_T-V_{OV},\n\\]\n\nwhere \\(V_{OV}\\) is the overdrive voltage at drain current \\(I_1/2\\).\n\n## 2. Small-signal voltage gain\n\nFor small signals, \\(V_{DD}\\) and \\(V_b\\) are AC ground, while the ideal tail source supplies **zero incremental current**.\n\nThe transistor currents are\n\n\\[\ni_{d1}=g_{m1}(v_{\\text{in}}-v_s),\n\\qquad\ni_{d2}=-g_{m2}v_s.\n\\]\n\nSince \\(i_{d1}+i_{d2}=0\\),\n\n\\[\ng_{m1}(v_{\\text{in}}-v_s)-g_{m2}v_s=0,\n\\]\n\ngiving\n\n\\[\nv_s=\\frac{g_{m1}}{g_{m1}+g_{m2}}v_{\\text{in}}.\n\\]\n\nThe output voltage is\n\n\\[\nv_{\\text{out}}=-R_Di_{d2}=g_{m2}R_Dv_s.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D\n}.\n\\]\n\nFor matched devices at the balanced operating point, \\(g_{m1}=g_{m2}=g_m\\), so\n\n\\[\n\\boxed{A_v=+\\frac{g_mR_D}{2}},\n\\qquad\nv_s=\\frac{v_{\\text{in}}}{2}.\n\\]\n\nThe gain is **positive**: increasing \\(V_{\\text{in}}\\) steers more current through \\(M_1\\), leaving less current through \\(M_2\\). The voltage drop across \\(R_D\\) decreases, so \\(V_{\\text{out}}\\) rises.\n\nAt low frequency, under these assumptions,\n\n\\[\nR_{\\text{in}}\\approx\\infty,\n\\qquad\nR_{\\text{out}}\\approx R_D.\n\\]\n\n## 3. Large-signal behavior and headroom\n\nFor sufficiently large input differences:\n\n- \\(V_{\\text{in}}>V_b\\): current is steered toward \\(M_1\\), and \\(V_{\\text{out}}\\to V_{DD}\\).\n- \\(V_{\\text{in}}<V_b\\): current is steered toward \\(M_2\\), and \\(V_{\\text{out}}\\to V_{DD}-I_1R_D\\).\n\nThus the ideal current-steering output limits are\n\n\\[\nV_{DD}-I_1R_D\\le V_{\\text{out}}\\le V_{DD}.\n\\]\n\nHowever, the saturation analysis requires, while each transistor is conducting,\n\n\\[\nV_{DD}\\ge V_{\\text{in}}-V_T,\n\\qquad\nV_{\\text{out}}\\ge V_b-V_T.\n\\]\n\nA practical tail source also requires sufficient voltage at \\(V_S\\) to maintain \\(I_1\\). These constraints can reduce the usable swing, and the gain becomes nonlinear as either transistor approaches cutoff.\n\n**Finite-output-resistance correction:** If both transistors have equal small-signal \\(g_m\\) and \\(r_o\\), with an ideal tail source,\n\n\\[\nR_{\\text{out}}=R_D\\parallel 2r_o,\n\\qquad\nA_v=\\frac{g_m}{2}\\left(R_D\\parallel 2r_o\\right).\n\\]",
        "format": "markdown",
        "sha256": "9467bab9c0df3dad2bf1a6816e82e34b6b0eb357d82969b2f4d722accfb40df5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower/common-gate topology (equivalently, a source-coupled differential pair), gives the non-inverting gain and sound supporting analysis.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 8270,
        "total_tokens": 10565,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7244,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 8270,
        "total_tokens": 10565,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7244,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **noninverting, source-coupled NMOS amplifier**—a differential pair with one gate held at \\(V_b\\) and the output taken from the opposite transistor.\n\nAssume an ideal current sink \\(I_1\\), constant \\(V_b\\) and \\(V_{DD}\\), and both MOSFETs operating in saturation. Initially neglect channel-length modulation and body effect.\n\n## 1. DC operating point\n\nLet \\(V_S\\) be the common-source voltage. The tail current imposes\n\\[\nI_{D1}+I_{D2}=I_1,\n\\]\nand the output voltage is\n\\[\n\\boxed{V_{\\text{out}}=V_{DD}-I_{D2}R_D.}\n\\]\n\nFor **matched transistors biased at \\(V_{\\text{in},Q}=V_b\\)**, the current divides equally:\n\\[\nI_{D1,Q}=I_{D2,Q}=\\frac{I_1}{2},\n\\qquad\n\\boxed{V_{\\text{out},Q}=V_{DD}-\\frac{I_1R_D}{2}.}\n\\]\n\nUsing \\(I_D=\\tfrac12\\beta(V_{GS}-V_{TH})^2\\), where \\(\\beta=\\mu_nC_{\\mathrm{ox}}W/L\\),\n\\[\nV_{OV}=\\sqrt{\\frac{I_1}{\\beta}},\n\\qquad\nV_{S,Q}=V_b-V_{TH}-V_{OV},\n\\qquad\ng_m=\\sqrt{\\beta I_1}.\n\\]\n\n## 2. Small-signal voltage gain\n\nFor small signals, \\(V_{DD}\\) and \\(V_b\\) are AC ground, and the ideal tail current source supplies **no incremental current**. Thus\n\\[\ni_{d1}+i_{d2}=0.\n\\]\n\nWriting the transistor currents in terms of the source-node signal \\(v_s\\),\n\\[\ni_{d1}=g_{m1}(v_{\\text{in}}-v_s),\n\\qquad\ni_{d2}=-g_{m2}v_s.\n\\]\n\nTherefore,\n\\[\ng_{m1}(v_{\\text{in}}-v_s)-g_{m2}v_s=0,\n\\]\nso\n\\[\n\\frac{v_s}{v_{\\text{in}}}\n=\\frac{g_{m1}}{g_{m1}+g_{m2}}.\n\\]\n\nSince \\(v_{\\text{out}}=-R_Di_{d2}=g_{m2}R_Dv_s\\),\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D.\n}\n\\]\n\nFor equal transconductances,\n\\[\n\\boxed{A_v=+\\frac{g_mR_D}{2}},\n\\qquad\nv_s=\\frac{v_{\\text{in}}}{2}.\n\\]\n\n**Why the positive sign?** Increasing \\(V_{\\text{in}}\\) increases \\(I_{D1}\\). Because their sum is fixed, \\(I_{D2}\\) decreases, reducing the drop across \\(R_D\\) and raising \\(V_{\\text{out}}\\).\n\n## 3. Input and output resistance\n\nIn the low-frequency model,\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty},\n\\qquad\n\\boxed{R_{\\text{out}}\\approx R_D}.\n\\]\n\nIf finite transistor output resistances are included, with equal \\(g_m\\) and \\(r_o\\) for the two devices and an ideal tail source,\n\\[\nR_{\\text{out}}=R_D\\parallel 2r_o,\n\\qquad\nA_v=\\frac{g_m}{2}\\left(R_D\\parallel 2r_o\\right).\n\\]\n\n## 4. Large-signal behavior and headroom\n\n- A sufficiently high \\(V_{\\text{in}}\\) steers nearly all \\(I_1\\) through \\(M_1\\), turning \\(M_2\\) off:\n  \\[\n  V_{\\text{out}}\\rightarrow V_{DD}.\n  \\]\n- A sufficiently low \\(V_{\\text{in}}\\) steers nearly all \\(I_1\\) through \\(M_2\\):\n  \\[\n  V_{\\text{out}}\\rightarrow V_{DD}-I_1R_D,\n  \\]\n  provided sufficient voltage headroom exists.\n\nWhile conducting, the saturation conditions are\n\\[\nM_1:\\quad V_{DD}\\ge V_{\\text{in}}-V_{TH1},\n\\qquad\nM_2:\\quad V_{\\text{out}}\\ge V_b-V_{TH2}.\n\\]\nThe tail current sink must also have sufficient compliance voltage at \\(V_S\\). The small-signal gain above applies around a bias point where both transistors remain on and saturated.",
        "format": "markdown",
        "sha256": "56f048f443fff4793298e38cc00fcb6b036624d4b207f572850e568193c0340a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a noninverting source-coupled differential pair, with M2 biased at Vb and output at its drain. The small-signal source-node relation and positive gain are also correct.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 6240,
        "total_tokens": 8535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 6240,
        "total_tokens": 8535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The key is \\(M_1\\)’s **gate–source capacitance \\(C_{gs1}\\)**, which is not drawn. Together with \\(R_S\\) and the transistor’s transconductance, it can synthesize an **active inductance**.\n\nTo find the output impedance, set the small-signal input to zero and apply a test voltage \\(v_x\\) at the output. Treat \\(M_2\\) as an ideal current source, and neglect body effect, output resistances, and capacitances other than \\(C=C_{gs1}\\). Let \\(g_m=g_{m1}\\).\n\nBecause the gate is connected to ground through \\(R_S\\), gate-node KCL gives\n\\[\n\\frac{v_g}{R_S}+sC(v_g-v_x)=0\n\\quad\\Rightarrow\\quad\nv_x-v_g=\\frac{v_x}{1+sR_SC}.\n\\]\nThe test current entering the output is\n\\[\ni_x=(g_m+sC)(v_x-v_g),\n\\]\nso\n\\[\n\\boxed{Z_{\\text{out}}(s)=\\frac{1+sR_SC}{g_m+sC}\n=\\frac{1}{g_m}\\frac{1+sR_SC}{1+sC/g_m}.}\n\\]\n\nThis impedance has a zero at \\(1/(R_SC)\\) and a pole at \\(g_m/C\\). If\n\\[\n\\boxed{R_S>\\frac{1}{g_m},}\n\\]\nthe zero occurs first, giving \\(Z_{\\text{out}}(j\\omega)\\) a **positive phase**—the signature of an inductive impedance. When \\(g_mR_S\\gg1\\), there is a frequency band\n\\[\n\\frac{1}{R_SC}\\ll\\omega\\ll\\frac{g_m}{C}\n\\]\nin which\n\\[\nZ_{\\text{out}}\\approx j\\omega L_{\\text{eff}},\n\\qquad\nL_{\\text{eff}}\\approx\\frac{R_SC}{g_m}.\n\\]\n\n**Physically:** at low frequencies the gate is effectively fixed, so a source-voltage change produces a strong restoring transistor current, giving \\(Z_{\\text{out}}\\approx1/g_m\\). At higher frequencies, \\(C_{gs1}\\) couples source motion onto the gate, reducing and delaying that restoring response. Under the condition above, the net output current lags the output voltage, just as with an inductor. Other parasitic capacitances limit the inductive frequency range.",
        "format": "markdown",
        "sha256": "e68f0549bb9454b4063ce62771e645c944fe72861717787e272455b451b0f050"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the output-impedance expression and identifies the zero-before-pole condition, giving inductive behavior for \\(R_S>1/g_m\\). The stated low-frequency behavior and gate coupling through \\(C_{gs1}\\) are consistent with the mechanism; the expression also implies the high-frequency limit \\(R_S\\).",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 7268,
        "total_tokens": 8858,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 7268,
        "total_tokens": 8858,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The key is the **gate–source capacitance \\(C_{gs1}\\)** of \\(M_1\\), although it is not drawn. Together with \\(R_S\\) and the transistor’s transconductance, it can synthesize an inductive impedance.\n\nTo calculate \\(Z_{\\text{out}}\\), set \\(V_{\\text{in}}\\), \\(V_b\\), and \\(V_{DD}\\) to AC ground and apply a test voltage \\(v_x\\) at the output. Treat \\(M_2\\) as an ideal bias current source and neglect body effect, channel-length modulation, and capacitances other than \\(C=C_{gs1}\\). Let \\(g_m=g_{m1}\\).\n\nThe gate voltage satisfies\n\\[\n\\frac{v_g}{R_S}+sC(v_g-v_x)=0,\n\\qquad\nv_g=\\frac{sR_SC}{1+sR_SC}v_x.\n\\]\nThe test current entering the output is\n\\[\ni_x=(g_m+sC)(v_x-v_g).\n\\]\nHence\n\\[\n\\boxed{Z_{\\text{out}}(s)=\\frac{1+sR_SC}{g_m+sC}}.\n\\]\n\nFor frequencies below \\(g_m/C\\), expanding this expression gives\n\\[\nZ_{\\text{out}}(s)\\simeq\n\\frac{1}{g_m}\n+s\\,\\underbrace{\\frac{C}{g_m}\n\\left(R_S-\\frac{1}{g_m}\\right)}_{L_{\\text{eff}}}.\n\\]\nThus, when\n\\[\n\\boxed{g_mR_S>1},\n\\]\nthe impedance resembles a resistance in series with a **positive inductance**. For \\(g_mR_S\\gg1\\),\n\\[\nL_{\\text{eff}}\\approx\\frac{R_SC_{gs1}}{g_m}.\n\\]\n\n**Physically:** At low frequency, \\(R_S\\) holds the gate at AC ground, and the follower strongly opposes output-voltage changes, giving \\(Z_{\\text{out}}\\approx1/g_m\\). At higher frequencies, \\(C_{gs1}\\) pulls the gate along with the source. This weakens and delays the restoring transconductance current. Under the condition above, the output current lags the output voltage—the signature of an inductive impedance. Other parasitic capacitances limit the frequency range over which this occurs.",
        "format": "markdown",
        "sha256": "1b5b17bb6e0e48a5528bf2cd86fb9b009572200c3d010fc2af9b98dd3f7aa869"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the output-impedance expression and shows that it has positive inductive behavior when \\(g_mR_S>1\\). The explanation identifies the gate-source capacitance coupling the gate toward the source at higher frequencies; the expression also gives the high-frequency limit \\(R_S\\).",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 6078,
        "total_tokens": 7668,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 6078,
        "total_tokens": 7668,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The effect comes from the **gate–source capacitance \\(C_{gs1}\\)** interacting with \\(R_S\\) and the transconductance of \\(M_1\\): together they can synthesize an **active inductance**.\n\nTo calculate output impedance, set the input to ac ground. Treat \\(M_2\\) as an ideal bias current source, and neglect body effect, channel-length modulation, and capacitances other than \\(C=C_{gs1}\\). Let \\(g_m=g_{m1}\\).\n\nApply a test voltage \\(v_x\\) at the output. The gate voltage satisfies\n\\[\n\\frac{v_g}{R_S}+sC(v_g-v_x)=0,\n\\qquad\nv_x-v_g=\\frac{v_x}{1+sR_SC}.\n\\]\nThe test current entering the output is\n\\[\ni_x=(g_m+sC)(v_x-v_g),\n\\]\nso\n\\[\n\\boxed{Z_{\\text{out}}(s)=\\frac{1+sR_SC}{g_m+sC}}.\n\\]\n\nFor \\(s=j\\omega\\),\n\\[\n\\operatorname{Im}Z_{\\text{out}}\n=\\frac{\\omega C(g_mR_S-1)}\n{g_m^2+\\omega^2C^2}.\n\\]\nThus the output impedance has **positive reactance—i.e., is inductive—when**\n\\[\n\\boxed{R_S>\\frac{1}{g_m}}.\n\\]\n\n**Physical interpretation:** At low frequencies, the gate is effectively grounded, giving \\(Z_{\\text{out}}\\approx1/g_m\\). At higher frequencies, \\(C_{gs1}\\) couples output motion back to the gate, weakening and delaying the transistor’s restoring current. If \\(R_S\\) is sufficiently large, the output current lags the output voltage, just as for an inductor.\n\nFor \\(\\omega C\\ll g_m\\), this can be written\n\\[\nZ_{\\text{out}}\\approx \\frac1{g_m}+sL_{\\text{eff}},\n\\qquad\nL_{\\text{eff}}=\\frac{C}{g_m}\\left(R_S-\\frac1{g_m}\\right).\n\\]\nOther parasitic capacitances limit the frequency range over which this inductive behavior occurs.",
        "format": "markdown",
        "sha256": "212255a69ec518e65360cbd1921ca3577381c13d48726a157e9310d5e004bca6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the output impedance, identifies the low-frequency limit as 1/gm and high-frequency limit as RS, and explains that it is inductive when RS > 1/gm. The effective inductance is also correct.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 6699,
        "total_tokens": 8289,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 6699,
        "total_tokens": 8289,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both transistors are NMOS, with their gates and drains cross-connected:\n\\[\nV_{GS1}=V_X,\\qquad V_{GS2}=V_{\\text{out}}.\n\\]\nThe important feature is that this connection produces **positive feedback**, not negative feedback.\n\n## 1. DC operating point\n\nAssume both MOSFETs are in saturation and initially neglect channel-length modulation. Since the gate of \\(M_1\\) draws no DC current,\n\\[\nI_{D2}=I_{\\text{in}}.\n\\]\n\nUsing \\(I_D=\\tfrac12\\beta(V_{GS}-V_T)^2\\), where \\(\\beta=\\mu_nC_{\\text{ox}}W/L\\),\n\\[\n\\boxed{V_{\\text{out}}=V_{T2}+\\sqrt{\\frac{2I_{\\text{in}}}{\\beta_2}}}.\n\\]\n\nThe resistor sets \\(M_1\\)'s drain current:\n\\[\nI_{D1}=\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}},\n\\]\nso\n\\[\n\\boxed{V_X=V_{T1}+\n\\sqrt{\\frac{2(V_{DD}-V_{\\text{out}})}{\\beta_1R_{D1}}}}.\n\\]\n\nThese equations describe a possible equilibrium only if the assumed operating regions are satisfied:\n\\[\nV_{\\text{out}}\\ge V_X-V_{T1},\\qquad\nV_X\\ge V_{\\text{out}}-V_{T2},\n\\]\nwith both devices on and \\(V_{\\text{out}}<V_{DD}\\). They do not establish that this equilibrium is stable.\n\n## 2. Small-signal gain and impedances\n\nInclude finite transistor output resistances and define\n\\[\nR=R_{D1}\\parallel r_{o1}.\n\\]\nThe supply is AC ground. KCL at the output and input nodes gives\n\\[\nv_{\\text{out}}=-g_{m1}Rv_x,\n\\]\n\\[\ni_{\\text{in}}=\\frac{v_x}{r_{o2}}+g_{m2}v_{\\text{out}}.\n\\]\n\nDefine the positive loop-gain magnitude\n\\[\nL=g_{m1}g_{m2}Rr_{o2}.\n\\]\nThe resulting low-frequency relations are\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n=-\\frac{g_{m1}Rr_{o2}}{1-L}},\n\\qquad\n\\boxed{R_{\\text{in}}=\\frac{v_x}{i_{\\text{in}}}\n=\\frac{r_{o2}}{1-L}}.\n\\]\n\nWith the input current source AC-open, the output resistance is\n\\[\n\\boxed{R_{\\text{out}}=\\frac{R}{1-L}}.\n\\]\n\nFor \\(L\\gg1\\),\n\\[\n\\frac{v_{\\text{out}}}{i_{\\text{in}}}\\approx\\frac{1}{g_{m2}},\n\\qquad\nR_{\\text{in}}\\approx-\\frac{1}{g_{m1}g_{m2}R}.\n\\]\nThese are formal linearized relations around the bias point; stability must still be checked.\n\n## 3. Feedback sign and stability\n\nConsider a small upward perturbation at \\(X\\):\n\\[\nv_x\\uparrow\n\\Rightarrow I_{D1}\\uparrow\n\\Rightarrow v_{\\text{out}}\\downarrow\n\\Rightarrow I_{D2}\\downarrow\n\\Rightarrow v_x\\uparrow.\n\\]\nThe last step follows because the fixed input current now exceeds \\(M_2\\)'s sink current and charges node \\(X\\). Thus the perturbation is reinforced.\n\nFor example, including lumped capacitances \\(C_X\\) and \\(C_O\\) to ground gives the characteristic equation\n\\[\n\\left(sC_X+\\frac{1}{r_{o2}}\\right)\n\\left(sC_O+\\frac{1}{R}\\right)-g_{m1}g_{m2}=0.\n\\]\nIf \\(L>1\\), its constant term is negative, so one pole lies in the right half-plane: **the equilibrium is unstable**. In this simple model, stability requires \\(L<1\\).\n\n**Bottom line:** the circuit is a cross-coupled positive-feedback structure. Its high-loop-gain equilibrium formally gives a transimpedance near \\(1/g_{m2}\\), but that equilibrium is unstable. Actual operation then moves outside the assumed bias region, with the final behavior depending on device parameters and current-source compliance.",
        "format": "markdown",
        "sha256": "c6ac8bc4d80993fe8976d40530df50204796da6ccfa3eea9bb9ed2efedcbeeab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as tied to Vout, traces the positive-feedback loop, and derives the loop-gain-modified negative input resistance and instability for L>1. The operating-point and stability discussion is consistent with the topology.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 9281,
        "total_tokens": 11338,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 9281,
        "total_tokens": 11338,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both devices are NMOS, with grounded sources. \\(M_1\\) is a common-source stage, while \\(M_2\\) senses \\(V_{\\text{out}}\\) and draws current from node \\(X\\). **The key feature is positive feedback.**\n\n## 1. Feedback polarity\n\nConsider a small increase in \\(V_X\\):\n\\[\nV_X\\uparrow\n\\;\\Rightarrow\\; I_{D1}\\uparrow\n\\;\\Rightarrow\\; V_{\\text{out}}\\downarrow\n\\;\\Rightarrow\\; I_{D2}\\downarrow.\n\\]\n\nBecause the input source continues injecting current, the reduced \\(I_{D2}\\) causes \\(V_X\\) to rise further. Thus the original disturbance is reinforced: the circuit is regenerative, not a conventional negative-feedback transimpedance amplifier.\n\n## 2. DC operating point\n\nNeglecting MOS gate currents,\n\\[\nI_{D2}=I_{\\text{in}},\\qquad\nI_{D1}=\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}.\n\\]\n\nFor explicit expressions, assume both devices are in saturation and neglect channel-length modulation. Define\n\\[\n\\beta_i=\\mu_n C_{\\text{ox}}(W/L)_i.\n\\]\nThen\n\\[\nI_{\\text{in}}\n=\\frac{\\beta_2}{2}(V_{\\text{out}}-V_{T2})^2,\n\\]\nso\n\\[\n\\boxed{V_{\\text{out}}\n=V_{T2}+\\sqrt{\\frac{2I_{\\text{in}}}{\\beta_2}}}.\n\\]\n\nThe corresponding input-node voltage is\n\\[\n\\boxed{V_X\n=V_{T1}+\n\\sqrt{\\frac{2(V_{DD}-V_{\\text{out}})}\n{\\beta_1R_{D1}}}}.\n\\]\n\nThese equations are valid only if both transistors are on and their saturation conditions hold:\n\\[\nV_{\\text{out}}\\ge V_X-V_{T1},\n\\qquad\nV_X\\ge V_{\\text{out}}-V_{T2},\n\\]\nwith \\(V_{\\text{out}}<V_{DD}\\). Otherwise, the appropriate cutoff or triode-region equations must be used.\n\n## 3. Small-signal behavior\n\nInclude the incremental drain resistances \\(r_{o1}\\) and \\(r_{o2}\\), and define\n\\[\nR_L=R_{D1}\\parallel r_{o1}.\n\\]\n\nSince \\(M_2\\)'s gate draws no low-frequency current,\n\\[\nv_{\\text{out}}=-g_{m1}R_Lv_x.\n\\]\n\nKCL at \\(X\\) gives\n\\[\ni_{\\text{in}}=\\frac{v_x}{r_{o2}}+g_{m2}v_{\\text{out}}.\n\\]\n\nDefine the positive low-frequency loop return gain\n\\[\nL_0=g_{m1}g_{m2}R_Lr_{o2}.\n\\]\nThe input resistance and transimpedance are therefore\n\\[\n\\boxed{R_{\\text{in}}\n=\\frac{v_x}{i_{\\text{in}}}\n=\\frac{r_{o2}}{1-L_0}}\n\\]\nand\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n=-\\frac{g_{m1}R_Lr_{o2}}{1-L_0}}.\n\\]\n\nFor \\(L_0\\gg1\\),\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{i_{\\text{in}}}\\approx\\frac{1}{g_{m2}}},\n\\qquad\n\\boxed{R_{\\text{in}}\\approx\n-\\frac{1}{g_{m1}g_{m2}R_L}}.\n\\]\nIf channel-length modulation is neglected, take \\(R_L=R_{D1}\\); these simplified expressions are then exact in the low-frequency small-signal model.\n\n### Stability interpretation\n\nThe positive transimpedance \\(1/g_{m2}\\) is a **formal operating-point slope**, not proof of stable amplification. For \\(L_0>1\\), the input resistance is negative, and ordinary node capacitances make that equilibrium unstable under ideal current-source drive.\n\nThus, in the high-gain saturation regime, the circuit behaves as a **positive-feedback, negative-resistance circuit**. A stable operating point may exist in another region—for example, with \\(M_2\\) in triode and sufficiently low loop gain—but device parameters and bias values are needed to determine it.",
        "format": "markdown",
        "sha256": "34402a94b00af076ccc53546faa7b90e29f65c9cc2dc4af7ef62fbceb3bbdea0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2 as controlled by Vout and describes the positive-feedback loop. Its loop-gain-modified, negative input resistance and instability conclusion match the golden solution; the stated small-signal formulas are also consistent.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 11575,
        "total_tokens": 13632,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10587,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 11575,
        "total_tokens": 13632,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10587,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The key feature is that **\\(M_1\\) and \\(M_2\\) form a positive-feedback loop**. Although a formal current-to-voltage gain can be calculated, the usual high-gain operating point is unstable.\n\n## 1. DC operating point\n\nAssume negligible gate currents and both NMOS transistors in saturation. Then\n\\[\nI_{D2}=I_{\\rm in},\\qquad\nI_{D1}=\\frac{V_{DD}-V_{\\rm out}}{R_{D1}}.\n\\]\n\nUsing the square-law model, with\n\\(\\beta_i=\\mu_nC_{\\rm ox}(W/L)_i\\), and neglecting channel-length modulation,\n\\[\nI_{\\rm in}=\\frac{\\beta_2}{2}(V_{\\rm out}-V_{T2})^2.\n\\]\nHence\n\\[\n\\boxed{V_{\\rm out}=V_{T2}+\\sqrt{\\frac{2I_{\\rm in}}{\\beta_2}}}.\n\\]\n\nSimilarly,\n\\[\n\\boxed{V_X=V_{T1}+\n\\sqrt{\\frac{2(V_{DD}-V_{\\rm out})}{\\beta_1R_{D1}}}}.\n\\]\n\nThese expressions are valid only if both devices are on and their saturation conditions hold:\n\\[\nV_{\\rm out}\\ge V_X-V_{T1},\\qquad\nV_X\\ge V_{\\rm out}-V_{T2}.\n\\]\n\n## 2. Small-signal analysis\n\nLet\n\\[\nR=R_{D1}\\parallel r_{o1},\n\\]\nand treat \\(V_{DD}\\) as AC ground. The output-node equation gives\n\\[\nv_{\\rm out}=-g_{m1}R\\,v_X.\n\\]\n\nAt node \\(X\\),\n\\[\ni_{\\rm in}=g_{m2}v_{\\rm out}+\\frac{v_X}{r_{o2}}.\n\\]\n\nCombining these equations yields the transimpedance\n\\[\n\\boxed{\n\\frac{v_{\\rm out}}{i_{\\rm in}}\n=\n\\frac{g_{m1}R}\n{g_{m1}g_{m2}R-1/r_{o2}}\n}\n\\]\nand input resistance\n\\[\n\\boxed{\nR_{\\rm in}=\n\\frac{v_X}{i_{\\rm in}}\n=\n\\frac{1}{1/r_{o2}-g_{m1}g_{m2}R}\n}.\n\\]\n\nIf channel-length modulation is neglected,\n\\[\n\\boxed{\\frac{v_{\\rm out}}{i_{\\rm in}}=\\frac{1}{g_{m2}}},\n\\qquad\n\\boxed{R_{\\rm in}=-\\frac{1}{g_{m1}g_{m2}R_{D1}}}.\n\\]\n\nThus the formal transimpedance is positive, but the incremental input resistance is **negative**.\n\nFor completeness, with the input current source opened, the formal output resistance is\n\\[\nR_{\\rm out}=\n\\frac{R}{1-g_{m1}g_{m2}Rr_{o2}}.\n\\]\n\n## 3. Feedback and stability\n\nConsider a small upward disturbance at \\(X\\):\n\\[\nV_X\\uparrow\n\\;\\Rightarrow\\;\nI_{D1}\\uparrow\n\\;\\Rightarrow\\;\nV_{\\rm out}\\downarrow\n\\;\\Rightarrow\\;\nI_{D2}\\downarrow.\n\\]\nBecause \\(M_2\\) now sinks less of the imposed input current, node \\(X\\) charges upward further. The disturbance is reinforced: **the feedback is positive**.\n\nThe low-frequency loop-gain magnitude is\n\\[\nL=g_{m1}g_{m2}Rr_{o2}.\n\\]\n\nFor example, including an input capacitance \\(C_X\\) and neglecting output capacitance gives\n\\[\nC_X\\frac{dv_X}{dt}\n+\\left(\\frac{1}{r_{o2}}-g_{m1}g_{m2}R\\right)v_X=0,\n\\]\nso the pole is\n\\[\n\\boxed{s_p=\\frac{g_{m1}g_{m2}R-1/r_{o2}}{C_X}}.\n\\]\nFor \\(L>1\\), this pole lies in the right half-plane.\n\n**Conclusion:** The result \\(v_{\\rm out}/i_{\\rm in}\\approx +1/g_{m2}\\) is an algebraic small-signal result, not evidence of stable amplification. In the usual high-gain saturation regime, this circuit is regenerative and unstable with the ideal current-source drive shown. A stable operating state, if available, may instead involve a transistor in cutoff or triode.",
        "format": "markdown",
        "sha256": "0b1da72e5ff9c38d3407190660fae7df6341e7248c48e69636f9c2edccf12f5b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly treats M2 as controlled by Vout, identifies the positive-feedback loop, and derives negative input resistance and instability for loop gain above one.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 8263,
        "total_tokens": 10320,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 8263,
        "total_tokens": 10320,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **negative-feedback transimpedance amplifier**: it converts an input current into an output voltage. In its intended high-gain regime,\n\\[\n\\boxed{\\Delta V_{\\rm out}\\approx -R_F\\,\\Delta I_{\\rm in}}.\n\\]\n\nSince no component values are given, consider a symbolic, low-frequency small-signal analysis. Assume both MOSFETs are biased in saturation, \\(V_b\\) and \\(V_{DD}\\) are AC grounds, and neglect transistor output resistance, body effect, and capacitances.\n\n## 1. Configuration and feedback\n\n- \\(M_1\\) is a **common-gate** stage, with its input at the source and output at node \\(X\\).\n- \\(M_2\\) is a **common-source** stage.\n- \\(R_F\\) samples the output voltage and returns a current to the input: **shunt–shunt feedback**.\n\nThrough the transistor signal path, an increase in the source voltage of \\(M_1\\) reduces its drain current, raising \\(v_x\\). This increases \\(M_2\\)'s drain current and pulls the output downward. The resulting current through \\(R_F\\) opposes the original input disturbance, giving negative feedback.\n\n## 2. Small-signal equations\n\nLet \\(v_s\\) be the voltage at the junction of \\(I_{\\rm in}\\), \\(R_F\\), and the source of \\(M_1\\). Lowercase quantities denote small-signal changes.\n\nAt node \\(X\\),\n\\[\nv_x=g_{m1}R_{D1}v_s.\n\\]\n\nKCL at the input gives\n\\[\ni_{\\rm in}=g_{m1}v_s+\\frac{v_s-v_{\\rm out}}{R_F}.\n\\]\n\nAt the output,\n\\[\n\\frac{v_{\\rm out}}{R_{D2}}\n+g_{m2}v_x\n+\\frac{v_{\\rm out}-v_s}{R_F}=0.\n\\]\n\nDefine\n\\[\nA=g_{m1}g_{m2}R_{D1}R_{D2},\n\\qquad\nD=1+g_{m1}(R_F+R_{D2})+A.\n\\]\n\nSolving these equations, **including loading by \\(R_F\\)**, gives the transimpedance\n\\[\n\\boxed{\nZ_t\\equiv\\frac{v_{\\rm out}}{i_{\\rm in}}\n=\\frac{R_{D2}-A R_F}{D}\n}.\n\\]\n\nThe input resistance is\n\\[\n\\boxed{\nR_{\\rm in}=\\frac{v_s}{i_{\\rm in}}\n=\\frac{R_F+R_{D2}}{D}\n}.\n\\]\n\nWith the input current source set to zero—that is, opened—the output resistance is\n\\[\n\\boxed{\nR_{\\rm out}\n=\\frac{R_{D2}(1+g_{m1}R_F)}{D}\n}.\n\\]\n\nAs a check, removing feedback by taking \\(R_F\\to\\infty\\) yields\n\\[\nZ_t\\to-g_{m2}R_{D1}R_{D2},\\qquad\nR_{\\rm in}\\to\\frac{1}{g_{m1}},\\qquad\nR_{\\rm out}\\to R_{D2}.\n\\]\n\n## 3. High-loop-gain behavior\n\nA low-frequency loop-gain magnitude, accounting for resistive loading, is\n\\[\nT=\\frac{A}{1+g_{m1}(R_F+R_{D2})}\n=\\frac{g_{m2}R_{D1}R_{D2}}\n{R_F+R_{D2}+1/g_{m1}}.\n\\]\n\nWhen \\(T\\gg1\\), and the direct resistive-feedthrough term is negligible \\((A R_F\\gg R_{D2})\\),\n\\[\n\\boxed{v_{\\rm out}\\approx -R_F i_{\\rm in}}.\n\\]\n\nThe feedback current, referenced in the direction shown, then satisfies\n\\[\ni_{\\rm RF}=\\frac{v_{\\rm out}-v_s}{R_F}\n\\approx -i_{\\rm in}.\n\\]\n\nThus, \\(R_F\\) sets the current-to-voltage conversion gain, while feedback reduces both input and output resistance. The input node behaves approximately as a **small-signal virtual ground**—its DC voltage is not necessarily zero.\n\nA numerical DC operating point, and verification that both devices remain in saturation, require \\(V_{DD}\\), \\(V_b\\), resistor values, and MOSFET parameters.",
        "format": "markdown",
        "sha256": "6fb271158a1a43f0acece825334c2e993df79a2005fe4ee960b1df1be92115ab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input stage, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input. The transimpedance conclusion and small-signal analysis are consistent with the circuit.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 15484,
        "total_tokens": 17762,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 15484,
        "total_tokens": 17762,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit function and feedback\n\nThis is a **transimpedance amplifier**: it converts input current into output voltage.\n\n- \\(M_1\\) is a **common-gate** stage, with its gate biased at \\(V_b\\).\n- \\(M_2\\) is a **common-source** stage.\n- \\(R_F\\) provides **shunt–shunt negative feedback**: output voltage is sampled, and a feedback current is returned to the input node.\n\nThe active-path polarity is\n\\[\nv_s\\uparrow\n\\;\\Rightarrow\\; I_{D1}\\downarrow\n\\;\\Rightarrow\\; v_x\\uparrow\n\\;\\Rightarrow\\; I_{D2}\\uparrow\n\\;\\Rightarrow\\; v_{\\rm out}\\downarrow ,\n\\]\nwhere \\(v_s\\) is the signal voltage at the source of \\(M_1\\). The resulting feedback current opposes the input perturbation.\n\n## 2. Small-signal analysis\n\nAssume both transistors are biased in saturation, neglect channel-length modulation, body effect, and capacitances, and treat \\(V_{DD}\\) and \\(V_b\\) as AC grounds. Lowercase variables denote small-signal quantities.\n\nAt node \\(X\\),\n\\[\n\\boxed{v_x=g_{m1}R_{D1}v_s}.\n\\]\n\nThe indicated feedback current is\n\\[\ni_{RF}=\\frac{v_{\\rm out}-v_s}{R_F}.\n\\]\n\nKCL at the input gives\n\\[\ni_{\\rm in}+i_{RF}=g_{m1}v_s,\n\\]\nor\n\\[\ni_{\\rm in}=g_{m1}v_s+\\frac{v_s-v_{\\rm out}}{R_F}.\n\\]\n\nAt the output,\n\\[\n\\frac{v_{\\rm out}}{R_{D2}}\n+g_{m2}v_x\n+\\frac{v_{\\rm out}-v_s}{R_F}=0.\n\\]\n\nDefine the dimensionless quantity\n\\[\nD=1+g_{m1}(R_F+R_{D2})\n  +g_{m1}g_{m2}R_{D1}R_{D2}.\n\\]\n\nSolving these equations gives the following exact results within this small-signal model.\n\n### Transimpedance\n\\[\n\\boxed{\nZ_T\\equiv\\frac{v_{\\rm out}}{i_{\\rm in}}\n=\n\\frac{R_{D2}\\!\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)}\n{D}\n}\n\\]\n\nThe positive term in the numerator represents direct feedthrough through \\(R_F\\); normally, the negative active-amplification term dominates.\n\n### Input resistance\n\\[\n\\boxed{\nR_{\\rm in}\\equiv\\frac{v_s}{i_{\\rm in}}\n=\\frac{R_F+R_{D2}}{D}\n}\n\\]\n\n### Output resistance\nWith the independent input current source set to zero—thus **open-circuited**—\n\\[\n\\boxed{\nR_{\\rm out}\n=\\frac{R_{D2}(1+g_{m1}R_F)}{D}\n}\n\\]\n\nThus, feedback reduces both input and output resistance.\n\n## 3. Useful feedback approximation\n\nWith \\(R_F\\) disconnected, the forward transimpedance is\n\\[\nZ_{T0}=-g_{m2}R_{D1}R_{D2}.\n\\]\n\nIncluding passive loading, the low-frequency loop-gain magnitude is\n\\[\n\\boxed{\nT=\\frac{g_{m2}R_{D1}R_{D2}}\n{R_F+R_{D2}+1/g_{m1}}\n}.\n\\]\n\nIf\n\\[\nR_F\\gg R_{D2},\\;\\frac{1}{g_{m1}},\n\\]\nthen\n\\[\nT\\approx\\frac{g_{m2}R_{D1}R_{D2}}{R_F},\n\\]\nand the usual feedback expressions follow:\n\\[\nZ_T\\approx -R_F\\frac{T}{1+T},\n\\qquad\nR_{\\rm in}\\approx\\frac{1/g_{m1}}{1+T},\n\\qquad\nR_{\\rm out}\\approx\\frac{R_{D2}}{1+T}.\n\\]\n\nFor strong feedback, \\(T\\gg1\\),\n\\[\n\\boxed{v_{\\rm out}\\approx -R_F\\,i_{\\rm in}}.\n\\]\n\nThe input node is then approximately an **AC virtual ground**, and\n\\[\ni_{RF}\\approx-i_{\\rm in}.\n\\]\n\nThese are signal relationships about a valid DC bias point; the actual DC voltages, output swing, bandwidth, and stability require component values and transistor parameters.",
        "format": "markdown",
        "sha256": "ee57ae196d4415c1e11d3fc70022d52c607aa8305a6bce0c0e3c749dc2b0926c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input node, forming a transimpedance amplifier. Its polarity and small-signal results are consistent with the circuit.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 15359,
        "total_tokens": 17637,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14332,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 15359,
        "total_tokens": 17637,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14332,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit function and feedback\n\nThis is a **current-to-voltage (transimpedance) amplifier** with **shunt–shunt negative feedback** through \\(R_F\\).\n\n- \\(M_1\\) is a **common-gate** stage: its gate is held at \\(V_b\\).\n- \\(M_2\\) is a **common-source** stage.\n- An increase in the input-node voltage raises \\(V_X\\), which makes \\(M_2\\) pull the output downward. Through \\(R_F\\), this draws current away from the input node, opposing the original change.\n\n## 2. Low-frequency small-signal analysis\n\nAssume both MOSFETs operate in saturation, neglect \\(r_o\\), body effect, and capacitances, and treat \\(V_{DD}\\) and \\(V_b\\) as AC grounds.\n\nLet \\(v_s\\) denote the signal voltage at the source of \\(M_1\\). The node equations are\n\n\\[\nv_x=g_{m1}R_{D1}v_s,\n\\]\n\n\\[\ni_{\\mathrm{in}}\n=g_{m1}v_s+\\frac{v_s-v_{\\mathrm{out}}}{R_F},\n\\]\n\n\\[\n\\frac{v_{\\mathrm{out}}}{R_{D2}}\n+g_{m2}v_x\n+\\frac{v_{\\mathrm{out}}-v_s}{R_F}=0.\n\\]\n\nDefine the unloaded forward voltage-gain magnitude\n\n\\[\nA_0=g_{m1}g_{m2}R_{D1}R_{D2},\n\\]\n\nand\n\n\\[\nD=1+g_{m1}(R_F+R_{D2})+A_0.\n\\]\n\nSolving gives the **closed-loop transimpedance**, including loading by \\(R_F\\):\n\n\\[\n\\boxed{\nZ_T=\\frac{v_{\\mathrm{out}}}{i_{\\mathrm{in}}}\n=\\frac{R_{D2}-A_0R_F}\n{1+g_{m1}(R_F+R_{D2})+A_0}\n}\n\\]\n\nThe positive \\(R_{D2}\\) term in the numerator represents direct signal feedthrough through \\(R_F\\); the amplified path provides the negative term.\n\n## 3. High-gain behavior\n\nThe low-frequency feedback-loop gain magnitude is\n\n\\[\nT=\\frac{A_0}{1+g_{m1}(R_F+R_{D2})}.\n\\]\n\nWhen \\(T\\gg1\\) and \\(A_0R_F\\gg R_{D2}\\),\n\n\\[\n\\boxed{v_{\\mathrm{out}}\\approx -R_F i_{\\mathrm{in}}.}\n\\]\n\nThus, the transimpedance is set mainly by the feedback resistor rather than the transistor parameters.\n\nUsing the feedback-current direction shown in the figure,\n\n\\[\ni_{\\mathrm{RF}}\n=\\frac{v_{\\mathrm{out}}-v_s}{R_F}\n\\approx -i_{\\mathrm{in}}.\n\\]\n\nThe input node is therefore approximately an **AC virtual ground**. Its DC voltage is not necessarily zero.\n\n## 4. Input and output resistances\n\nThe input resistance is\n\n\\[\n\\boxed{\nR_{\\mathrm{in}}\n=\\frac{v_s}{i_{\\mathrm{in}}}\n=\\frac{R_F+R_{D2}}{D}.\n}\n\\]\n\nWith the ideal input current source turned off—meaning **open-circuited**—the output resistance is\n\n\\[\n\\boxed{\nR_{\\mathrm{out}}\n=\\frac{R_{D2}(1+g_{m1}R_F)}{D}.\n}\n\\]\n\nBoth are reduced relative to their no-feedback values:\n\n\\[\nR_{\\mathrm{in},0}=\\frac{1}{g_{m1}},\n\\qquad\nR_{\\mathrm{out},0}=R_{D2}.\n\\]\n\n**Overall:** the circuit converts input-current variations into inverted output-voltage variations, ideally with gain \\(-R_F\\), while feedback lowers both input and output resistance. Numerical DC bias, signal swing, bandwidth, and stability require component values and MOSFET parameters.",
        "format": "markdown",
        "sha256": "b6bf7a9fec193924b584cd5255cda805f0536dffe814b26f659ac3eab0cfad07"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input, forming a transimpedance amplifier. The stated high-gain result and small-signal analysis are consistent with the topology.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 13313,
        "total_tokens": 15591,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 13313,
        "total_tokens": 15591,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **negative-feedback current-to-voltage converter (transimpedance amplifier)**. \\(M_1\\) is an NMOS common-gate device, and \\(M_2\\) is a PMOS feedback device.\n\nLet \\(V_X\\) denote the node connected to \\(I_{\\text{in}}\\), and call the **unlabeled lower current sink** \\(I_B\\). Assume ideal bias-current sources, fixed \\(V_b\\) and \\(V_{DD}\\), an unloaded output, and both MOSFETs in saturation.\n\n## 1. DC operating point\n\nSince the gate of \\(M_2\\) draws no DC current, output-node KCL gives\n\\[\nI_{D1}=I_1.\n\\]\n\nAt the input node,\n\\[\nI_{\\text{in}}+I_{D1}+I_{D2}=I_B,\n\\]\nwhere \\(I_{D2}\\) is the PMOS source-to-drain current. Thus,\n\\[\n\\boxed{I_{D2}=I_B-I_1-I_{\\text{in}}.}\n\\]\n\nUsing the square-law model, neglecting body effect and channel-length modulation, and defining\n\\[\n\\beta_i=\\mu_i C_{\\text{ox}}(W/L)_i,\n\\]\nthe input-node voltage is\n\\[\n\\boxed{V_X=V_b-V_{TN}-\\sqrt{\\frac{2I_1}{\\beta_1}}.}\n\\]\n\nThus, \\(M_1\\) holds the input-node voltage approximately constant. For \\(M_2\\),\n\\[\nI_{D2}=\\frac{\\beta_2}{2}\n\\left(V_{DD}-V_{\\text{out}}-|V_{TP}|\\right)^2,\n\\]\nso\n\\[\n\\boxed{\nV_{\\text{out}}\n=V_{DD}-|V_{TP}|\n-\\sqrt{\\frac{2(I_B-I_1-I_{\\text{in}})}{\\beta_2}}.\n}\n\\]\n\nTherefore, **increasing the injected input current increases the output voltage**. The large-signal conversion is nonlinear.\n\n## 2. How the feedback works\n\nAn increase in \\(I_{\\text{in}}\\) initially raises \\(V_X\\). This reduces \\(V_{GS1}\\), so \\(M_1\\)'s drain current tends to decrease. The fixed current \\(I_1\\) then raises \\(V_{\\text{out}}\\).\n\nA higher \\(V_{\\text{out}}\\) reduces \\(M_2\\)'s \\(V_{SG}\\), decreasing the current it supplies to the input node. This opposes the original disturbance: the feedback is **negative**, making the input node nearly an AC virtual ground.\n\n## 3. Small-signal transimpedance and input resistance\n\nInclude transistor output resistances \\(r_{o1}\\) and \\(r_{o2}\\), but initially neglect body effect. Lowercase quantities denote small-signal variations.\n\nBecause \\(I_1\\) is fixed and the output is unloaded,\n\\[\n0=i_{d1}\n=-g_{m1}v_x+\\frac{v_o-v_x}{r_{o1}}.\n\\]\nHence,\n\\[\nv_o=A v_x,\\qquad A=1+g_{m1}r_{o1}.\n\\]\n\nThe incremental current supplied by \\(M_2\\) is\n\\[\ni_{d2}=-g_{m2}v_o-\\frac{v_x}{r_{o2}},\n\\]\nso input-node KCL gives\n\\[\ni_{\\text{in}}=g_{m2}v_o+\\frac{v_x}{r_{o2}}.\n\\]\n\nConsequently,\n\\[\n\\boxed{\nZ_T\\equiv\\frac{v_o}{i_{\\text{in}}}\n=\\frac{A}{g_{m2}A+1/r_{o2}}\n\\approx+\\frac{1}{g_{m2}}\n}\n\\]\nand\n\\[\n\\boxed{\nR_{\\text{in}}\\equiv\\frac{v_x}{i_{\\text{in}}}\n=\\frac{1}{g_{m2}A+1/r_{o2}}\n\\approx\\frac{1}{g_{m1}g_{m2}r_{o1}}.\n}\n\\]\n\nThe approximations apply when \\(g_{m1}r_{o1}\\gg1\\) and \\(g_{m2}A\\gg1/r_{o2}\\). As \\(r_{o1}\\to\\infty\\), the idealized input resistance approaches zero.\n\nWith the input current source opened for small signal, the output resistance is\n\\[\nR_{\\text{out}}\n=\\frac{A+r_{o1}/r_{o2}}{g_{m2}A+1/r_{o2}}.\n\\]\nNeglecting \\(1/r_{o2}\\), this becomes \\(R_{\\text{out}}=1/g_{m2}\\).\n\nIf \\(M_1\\)'s body is at AC ground, include body effect by replacing \\(g_{m1}\\) with \\(g_{m1}+g_{mb1}\\).\n\n## 4. Operating limits\n\nThese results require\n\\[\nI_B-I_1-I_{\\text{in}}>0\n\\]\nso that \\(M_2\\) conducts, together with the saturation conditions\n\\[\nV_{\\text{out}}\\ge V_b-V_{TN},\n\\qquad\nV_X\\le V_{\\text{out}}+|V_{TP}|.\n\\]\nPractical bias-current sources must also retain sufficient voltage headroom.\n\n**In summary:** \\(M_1\\) helps hold the input voltage constant, while \\(M_2\\) sets the incremental current-to-voltage conversion, approximately \\(+1/g_{m2}\\).",
        "format": "markdown",
        "sha256": "204fb1da26ee3776f8c8bd3b4c019c61872ce9ec803cee5b456052beedfad115"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device, explains the feedback path to the input node, and gives the very low input resistance and approximately 1/gm2 transimpedance and output resistance. The added small-signal analysis is consistent with the golden solution.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 12908,
        "total_tokens": 15075,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 12908,
        "total_tokens": 15075,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **negative-feedback transimpedance stage**: it converts an input current into an output voltage while keeping the input-node voltage nearly constant.\n\nLet \\(V_x\\) denote the junction of \\(M_1\\), \\(M_2\\), and \\(I_{\\rm in}\\), and call the unlabeled bottom current sink \\(I_0\\). Here \\(M_1\\) is NMOS and \\(M_2\\) is PMOS.\n\nAssume ideal bias-current sources, an unloaded output, and both transistors operating in saturation.\n\n## 1. DC operating point\n\nBecause the gate of \\(M_2\\) draws no DC current, KCL at the output gives\n\\[\nI_{D1}=I_1.\n\\]\nAt the input node,\n\\[\nI_{\\rm in}+I_{D1}+I_{D2}=I_0,\n\\]\nso\n\\[\n\\boxed{I_{D2}=I_0-I_1-I_{\\rm in}}.\n\\]\n\nNeglecting body effect and channel-length modulation, and defining\n\\(\\beta_i=\\mu_i C_{\\rm ox}(W/L)_i\\),\n\\[\n\\boxed{V_x=V_b-V_{TN}-\\sqrt{\\frac{2I_1}{\\beta_1}}}\n\\]\nand\n\\[\n\\boxed{\nV_{\\rm out}\n=V_{DD}-|V_{TP}|\n-\\sqrt{\\frac{2(I_0-I_1-I_{\\rm in})}{\\beta_2}}\n}.\n\\]\n\nThus:\n\n- \\(I_1\\) and \\(V_b\\) establish the input-node voltage.\n- The remaining current \\(I_0-I_1-I_{\\rm in}\\) flows through \\(M_2\\).\n- Increasing \\(I_{\\rm in}\\) decreases \\(M_2\\)'s current and **increases \\(V_{\\rm out}\\)**.\n\nThe large-signal current-to-voltage characteristic is nonlinear; the transimpedance below is its local, small-signal value.\n\n## 2. Negative-feedback action\n\nSuppose the input-node voltage rises:\n\n\\[\nV_x\\uparrow\n\\;\\Rightarrow\\;\nV_{GS1}\\downarrow\n\\;\\Rightarrow\\;\nI_{D1}\\downarrow\n\\;\\Rightarrow\\;\nV_{\\rm out}\\uparrow\n\\;\\Rightarrow\\;\nI_{D2}\\downarrow.\n\\]\n\nThe reduction in current supplied by \\(M_2\\) opposes the original rise in \\(V_x\\). This is voltage-sampling, current-mixing—or **shunt–shunt**—negative feedback.\n\n## 3. Low-frequency small-signal behavior\n\nInclude transistor output resistances \\(r_{o1}\\) and \\(r_{o2}\\), but neglect capacitances and body effect. Lowercase quantities denote small-signal variations.\n\nSince the ideal source \\(I_1\\) has no small-signal variation,\n\\[\ni_{d1}=0\n=-g_{m1}v_x+\\frac{v_o-v_x}{r_{o1}}.\n\\]\nTherefore,\n\\[\nv_o=A v_x,\n\\qquad\nA\\equiv 1+g_{m1}r_{o1}.\n\\]\n\nThe incremental PMOS current flowing into the input node is\n\\[\ni_{d2}=-g_{m2}v_o-\\frac{v_x}{r_{o2}}.\n\\]\nInput-node KCL consequently gives\n\\[\ni_{\\rm in}=g_{m2}v_o+\\frac{v_x}{r_{o2}}.\n\\]\n\n### Input resistance\n\\[\n\\boxed{\nR_{\\rm in}=\\frac{v_x}{i_{\\rm in}}\n=\\frac{1}{g_{m2}A+1/r_{o2}}\n}\n\\]\n\n### Transimpedance\n\\[\n\\boxed{\nZ_t=\\frac{v_o}{i_{\\rm in}}\n=\\frac{A}{g_{m2}A+1/r_{o2}}\n=\\frac{1}{g_{m2}+1/(Ar_{o2})}\n}\n\\]\n\nFor usual high-intrinsic-gain devices,\n\\[\n\\boxed{Z_t\\approx+\\frac{1}{g_{m2}}},\n\\qquad\n\\boxed{R_{\\rm in}\\approx\\frac{1}{g_{m1}g_{m2}r_{o1}}}.\n\\]\n\nThus the input resistance can be much smaller than the ordinary common-gate value \\(1/g_{m1}\\). In the ideal \\(r_o\\to\\infty\\) limit, \\(v_x=0\\) and \\(R_{\\rm in}=0\\).\n\nWith the input current held fixed, the output resistance is\n\\[\nR_{\\rm out}\n=\\frac{r_{o1}+A r_{o2}}{1+g_{m2}A r_{o2}}\n\\approx\\frac{1}{g_{m2}}.\n\\]\n\nIf body effect matters, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\) in these small-signal formulas.\n\n## 4. Operating limits\n\nThe analysis requires\n\\[\nI_0-I_1-I_{\\rm in}>0\n\\]\nand the saturation conditions\n\\[\nV_{\\rm out}\\ge V_b-V_{TN},\n\\qquad\nV_{\\rm out}\\ge V_x-|V_{TP}|.\n\\]\nReal current sources also require sufficient compliance voltage.\n\n**Main result:** the circuit accepts current at an approximately fixed input voltage and produces a positive output-voltage increment\n\\[\n\\boxed{v_o\\approx \\frac{i_{\\rm in}}{g_{m2}}}.\n\\]",
        "format": "markdown",
        "sha256": "12a857115deaf070adfda2adf9cc947d5bcf5552e0880bbf3a31f45c6d91443f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device and PMOS feedback device, traces the negative-feedback path to the input node, and gives the low-input-resistance and approximately 1/gm2 transimpedance results. These satisfy the golden solution’s full-credit rule.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 13123,
        "total_tokens": 15290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 13123,
        "total_tokens": 15290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11912,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **low-input-impedance current-to-voltage (transimpedance) amplifier with negative feedback**.\n\nLet \\(V_X\\) denote the lower common node—the source of NMOS \\(M_1\\) and drain of PMOS \\(M_2\\)—and call the unlabeled current sink \\(I_B\\). Assume ideal bias sources, an unloaded output, and both MOSFETs operating in saturation.\n\n## 1. DC operating point\n\nSince the gate of \\(M_2\\) draws no current, KCL at the output gives\n\\[\nI_{D1}=I_1.\n\\]\n\nAt node \\(X\\), taking \\(I_{D2}\\) as the current supplied by \\(M_2\\),\n\\[\nI_{\\rm in}+I_{D1}+I_{D2}=I_B,\n\\]\nso\n\\[\n\\boxed{I_{D2}=I_B-I_1-I_{\\rm in}}.\n\\]\n\nThus, \\(M_1\\) establishes the input-node voltage, while \\(M_2\\) determines the output voltage.\n\nIgnoring body effect and channel-length modulation, the square-law model gives\n\\[\n\\boxed{V_X=V_b-V_{TN}-\\sqrt{\\frac{2I_1}{\\beta_n}}}\n\\]\nand\n\\[\n\\boxed{\nV_{\\rm out}\n=V_{DD}-|V_{TP}|\n-\\sqrt{\\frac{2(I_B-I_1-I_{\\rm in})}{\\beta_p}}\n},\n\\]\nwhere \\(\\beta=\\mu C_{\\rm ox}(W/L)\\).\n\nConsequently, **increasing the input current increases the output voltage**. The large-signal transfer is nonlinear.\n\nThese expressions require \\(I_B-I_1-I_{\\rm in}>0\\), together with the saturation conditions\n\\[\nV_{\\rm out}\\ge V_b-V_{TN},\n\\qquad\nV_X\\le V_{\\rm out}+|V_{TP}|.\n\\]\nPractical current sources impose additional voltage-headroom limits.\n\n## 2. Small-signal transimpedance and input resistance\n\nNow retain the transistor output resistances \\(r_{o1}\\) and \\(r_{o2}\\). Both \\(V_b\\) and \\(V_{DD}\\) are AC ground.\n\nBecause the ideal source \\(I_1\\) supplies no incremental current, the incremental drain current of \\(M_1\\) must be zero:\n\\[\n0=-g_{m1}v_X+\\frac{v_{\\rm out}-v_X}{r_{o1}}.\n\\]\n\nTherefore,\n\\[\nv_{\\rm out}=A\\,v_X,\n\\qquad\nA\\equiv 1+g_{m1}r_{o1}.\n\\]\n\nThe incremental current supplied by PMOS \\(M_2\\) is\n\\[\ni_{D2}=-g_{m2}v_{\\rm out}-\\frac{v_X}{r_{o2}}.\n\\]\nKCL at \\(X\\), using \\(i_{D1}=0\\), then gives\n\\[\ni_{\\rm in}=g_{m2}v_{\\rm out}+\\frac{v_X}{r_{o2}}.\n\\]\n\nHence the transimpedance is\n\\[\n\\boxed{\nR_T\\equiv\\frac{v_{\\rm out}}{i_{\\rm in}}\n=\\frac{A r_{o2}}{1+g_{m2}A r_{o2}}\n\\approx \\frac{1}{g_{m2}}\n}.\n\\]\n\nThe input resistance is\n\\[\n\\boxed{\nR_{\\rm in}\\equiv\\frac{v_X}{i_{\\rm in}}\n=\\frac{r_{o2}}{1+g_{m2}A r_{o2}}\n\\approx \\frac{1}{g_{m1}g_{m2}r_{o1}}\n}.\n\\]\n\nThe approximations assume large transistor gain and large feedback-loop gain. If \\(r_{o1}\\to\\infty\\), the input node is ideally fixed and \\(R_{\\rm in}\\to0\\). To include NMOS body effect, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).\n\n## 3. Output resistance\n\nWith the input signal current source set to zero—open-circuited—the output resistance is\n\\[\n\\boxed{\nR_{\\rm out}\n=\\frac{r_{o1}+A r_{o2}}{1+g_{m2}A r_{o2}}\n\\approx \\frac{1}{g_{m2}}\n}\n\\]\nunder the usual high-gain approximations.\n\n## 4. Feedback mechanism\n\nAn increase in \\(I_{\\rm in}\\) initially tends to raise \\(V_X\\). This reduces \\(M_1\\)'s current, causing \\(V_{\\rm out}\\) to rise. The rising output reduces the current supplied by PMOS \\(M_2\\), opposing the original disturbance.\n\nThus, \\(M_1\\)'s gain keeps the input node nearly constant, while \\(M_2\\)'s transconductance sets the small-signal conversion:\n\\[\n\\boxed{\\Delta V_{\\rm out}\\approx \\frac{\\Delta I_{\\rm in}}{g_{m2}}}.\n\\]\n\nNumerical bias values and bandwidth require the missing current, device, and capacitance parameters.",
        "format": "markdown",
        "sha256": "68da0c3def07caa3b233e5d26208606998683c2074eb04446578faaa76242362"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device and PMOS feedback device, describes the output-to-input feedback, and gives the low input resistance and transimpedance/output-resistance scales of approximately 1/gm2. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 13033,
        "total_tokens": 15200,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 13033,
        "total_tokens": 15200,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not for arbitrarily large but finite capacitances**, assuming the inverters have sufficient gain. Larger capacitors take longer to charge and discharge, so the ring simply oscillates more slowly.\n\nFor example, model each inverter as\n\\[\nH(s)=\\frac{-A_0}{1+sR_oC_L},\n\\]\nwhere \\(A_0\\) is its DC gain magnitude and \\(R_o\\) its output resistance. The three-stage loop has the required phase at\n\\[\n\\omega_0=\\frac{\\sqrt3}{R_oC_L}.\n\\]\nAt that frequency, each stage’s gain magnitude is \\(A_0/2\\), so the startup requirement is\n\\[\n\\left(\\frac{A_0}{2}\\right)^3>1\n\\quad\\Longrightarrow\\quad A_0>2,\n\\]\nwhich is **independent of \\(C_L\\)**.\n\nThus, increasing all three capacitances reduces the frequency roughly in proportion to \\(1/C_L\\), rather than eliminating oscillation. Only in the strict infinite-capacitance limit does the frequency become zero: finite inverter currents cannot change the capacitor voltages.",
        "format": "markdown",
        "sha256": "01fb33d6eb833206f9d51fbeef046c3dda75503f034090b37dbabf30275daa09"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that increasing all three capacitances lowers the oscillation frequency without changing the gain condition, and supports this with a valid small-signal phase and gain analysis. The finite-versus-infinite-capacitance qualification is consistent with the result.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 3870,
        "total_tokens": 6067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 3870,
        "total_tokens": 6067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not for arbitrarily large but finite, equal capacitances**, assuming the inverters have sufficient gain. Larger capacitors take longer to charge and discharge, so the ring oscillates more slowly.\n\nFor example, model each inverter as\n\\[\nH(s)=\\frac{-A_0}{1+sR_oC_L},\n\\]\nwhere \\(A_0\\) is its low-frequency gain magnitude and \\(R_o\\) its output resistance. The three-stage loop satisfies the phase condition at\n\\[\n\\omega_0=\\frac{\\sqrt3}{R_oC_L},\n\\]\nwhere its loop-gain magnitude is\n\\[\n|H(j\\omega_0)|^3=\\left(\\frac{A_0}{2}\\right)^3.\n\\]\nThus the startup requirement \\(A_0>2\\) is **independent of capacitance**, while the frequency scales as \\(1/C_L\\).\n\nThere is therefore no finite upper capacitance limit inherent in this idealized circuit. In the strict limit \\(C_L\\to\\infty\\), however, the frequency tends to zero and the period becomes infinite. Very large finite capacitors can also make startup too slow to observe.",
        "format": "markdown",
        "sha256": "7ec8080b7dc160930ffeb49f0209a0e308771caddb6f71f6c6d3a7a1cf8f4e9c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal, finite capacitors do not stop oscillation: they lower the frequency roughly as 1/CL, while the small-signal gain condition is independent of capacitance. The infinite-limit and practical startup caveats do not contradict the result.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 3358,
        "total_tokens": 5555,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 3358,
        "total_tokens": 5555,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not for arbitrarily large but finite capacitances**, assuming the inverters have sufficient gain. Increasing all three capacitors simply slows the ring oscillator.\n\nEach inverter charges or discharges its load according to\n\\[\n\\frac{dv}{dt}=\\frac{I_{\\text{out}}}{C_L}.\n\\]\nThus, when these capacitors dominate the dynamics, multiplying all three by a factor \\(k\\) stretches the waveforms in time by the same factor. For a three-stage ring,\n\\[\nf_{\\text{osc}}\\approx \\frac{1}{6t_{pd}},\n\\qquad t_{pd}\\propto C_L,\n\\]\nso \\(f_{\\text{osc}}\\propto 1/C_L\\). Startup also becomes slower.\n\nImportantly, increasing all three capacitances does not inherently eliminate the required loop gain; the phase condition is met at a correspondingly lower frequency.\n\nIn the **strict limit \\(C_L\\to\\infty\\)**, however, the period tends to infinity and the frequency tends to zero. Thus there is no finite-capacitance cutoff in the usual ideal model, but an extremely slow oscillator may appear stationary over a finite observation time.",
        "format": "markdown",
        "sha256": "c2ddee86d094e2ddb261bc35fafde7227146a8048b6c537d80eaae1f3435c09a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors slow the oscillator without causing a finite-capacitance cutoff, supported by the delay and inverse-frequency scaling argument. The infinite-capacitance limit is appropriately distinguished from finite capacitances.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 4393,
        "total_tokens": 6590,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 4393,
        "total_tokens": 6590,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise improves by approximately 6 dB at a fixed offset frequency**, assuming the inverters and supply remain unchanged and \\(C_L\\) dominates the node capacitance.\n\nThe stage delay scales as\n\\[\nt_d\\approx \\frac{C_L V_{\\text{swing}}}{I},\n\\]\nso doubling all three capacitors doubles the period and **halves the oscillation frequency**.\n\nWith unchanged transistor noise and voltage swing, the phase-noise density in linear units scales as\n\\[\n\\mathcal L(\\Delta f)\\propto \\frac{1}{C_L^2(\\Delta f)^2}.\n\\]\nConsequently,\n\\[\n\\mathcal L_{\\text{new}}=\\frac{\\mathcal L_{\\text{old}}}{4},\n\\qquad\n10\\log_{10}(1/4)\\approx-6.02\\ \\text{dB}.\n\\]\n\nThis improvement comes at the cost of halving the carrier frequency. At the same **fractional offset** \\(\\Delta f/f_0\\), rather than the same offset in hertz, the phase-noise density is approximately unchanged.",
        "format": "markdown",
        "sha256": "308c62df6ccc05b872c269fb18ee09938e7bbefaaa3d0a471f5c60c2afddc50b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and lowers phase noise by about 6 dB at a fixed offset, while leaving it approximately unchanged at a fixed fractional offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 3348,
        "total_tokens": 5542,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 3348,
        "total_tokens": 5542,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise decreases by approximately \\(6\\,\\mathrm{dB}\\) at a fixed offset frequency**, assuming the inverters and supply are unchanged and \\(C_L\\) dominates the loading. The oscillation frequency also halves.\n\nDoubling \\(C_L\\):\n- Doubles each stage’s delay, giving \\(f_{\\mathrm{osc,new}}\\approx f_{\\mathrm{osc,old}}/2\\).\n- Doubles the charge swing \\(q_{\\max}=C_LV_{\\mathrm{swing}}\\), while the transistor noise-current spectral density remains approximately unchanged.\n\nThe usual thermal phase-noise expression scales as\n\\[\n\\mathcal L(\\Delta f)\\propto\n\\frac{S_i}{q_{\\max}^{2}(2\\pi\\Delta f)^2}.\n\\]\nThus, at the same offset \\(\\Delta f\\) in hertz,\n\\[\n\\frac{\\mathcal L_{\\mathrm{new}}}{\\mathcal L_{\\mathrm{old}}}\n=\\frac14,\n\\qquad\n10\\log_{10}\\!\\left(\\frac14\\right)\\approx-6\\,\\mathrm{dB}.\n\\]\n\nAt the same **fractional offset** \\(\\Delta f/f_{\\mathrm{osc}}\\), however, the usual \\(1/\\Delta f^2\\) phase-noise level is approximately unchanged.",
        "format": "markdown",
        "sha256": "628435868c72b20f3aeaeee77c3580de85249cd66c813055e20f2c657c1ca47c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and lowers phase noise by about 6 dB at a fixed offset, with a charge-based justification. It also correctly notes that the level is approximately unchanged at a fixed fractional offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 5408,
        "total_tokens": 7602,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5126,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 5408,
        "total_tokens": 7602,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5126,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise improves by approximately \\(6\\,\\text{dB}\\) at a fixed frequency offset**, assuming the inverters and supply remain unchanged and \\(C_L\\) dominates the load.\n\nDoubling every \\(C_L\\):\n- Doubles the stage delays, so the oscillation frequency \\(f_0\\) is halved.\n- Doubles the signal charge swing \\(q_{\\max}=C_LV_{\\text{swing}}\\), while the inverter noise-current density remains approximately unchanged.\n\nIn the usual thermal-noise-dominated region,\n\\[\n\\mathcal L(\\Delta f)\\propto\n\\frac{S_i}{q_{\\max}^{\\,2}(\\Delta f)^2}.\n\\]\nThus,\n\\[\n\\mathcal L_{\\text{new}}(\\Delta f)=\\frac14\\mathcal L_{\\text{old}}(\\Delta f),\n\\qquad 10\\log_{10}(1/4)\\approx-6\\,\\text{dB}.\n\\]\n\nThe qualification matters: this compares the **same offset in hertz**, and the improvement comes with half the oscillation frequency.",
        "format": "markdown",
        "sha256": "9749174c78d20f85bce983e2c68fec8afc8a1c4c8c2c7da5223d35a6e55d41d2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts about a 6 dB (fourfold) phase-noise reduction at fixed offset, supported by the doubled charge swing and halved oscillation frequency.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 3821,
        "total_tokens": 6015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3585,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 3821,
        "total_tokens": 6015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3585,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—for ordinary finite-gain inverters, a sufficiently large \\(C_L\\) can stop oscillation, rather than merely slow it down.**\n\nThe large capacitor creates a **dominant pole** at the first inverter’s output. The other two stages then respond almost instantaneously on the relevant time scale, making the circuit effectively a single-pole negative-feedback loop. It can settle at an analog DC operating point near the inverters’ switching thresholds.\n\nFor example, model each inverter’s DC gain as \\(-A\\), with time constants \\(\\tau_L,\\tau,\\tau\\):\n\\[\nL(s)=\\frac{-A^3}{(1+s\\tau_L)(1+s\\tau)^2},\n\\qquad \\tau_L\\simeq R_oC_L.\n\\]\nFor \\(\\tau_L\\gg\\tau\\), the required oscillation phase occurs near \\(\\omega=1/\\tau\\), where\n\\[\n|L(j\\omega)|\\approx \\frac{A^3\\tau}{2\\tau_L}\\longrightarrow 0.\n\\]\nThus, for sufficiently large \\(C_L\\), the loop gain is below unity at the required phase, and oscillation cannot build up.\n\nAn odd number of inversions alone does **not** guarantee oscillation; the real circuit must also satisfy the loop-gain condition.",
        "format": "markdown",
        "sha256": "dc17412f14c7f68c4ee84008a1fa40e2f5315af5b0428273c753e34d7767f8b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large loading at one node creates a dominant pole, reduces loop gain below unity at the required phase, and prevents oscillation. The approximate model and DC-settling explanation are consistent with the golden solution.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 6401,
        "total_tokens": 8453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 6401,
        "total_tokens": 8453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—for ordinary, finite-gain inverters, a sufficiently large \\(C_L\\) can stop the oscillation**, rather than merely lower its frequency indefinitely.\n\nThe heavily loaded node creates a **dominant pole**. The other two inverters then respond almost instantaneously relative to that node, making the circuit effectively a first-order negative-feedback system. It can settle at a stable analog DC operating point near the inverters’ switching thresholds.\n\nFor example, model the loop transmission as\n\\[\nL(s)=\\frac{-A^3}{(1+s\\tau_L)(1+s\\tau)^2},\n\\]\nwhere \\(A\\) is each inverter’s DC gain magnitude, \\(\\tau_L\\propto C_L\\), and \\(\\tau\\) is the time constant of either lightly loaded stage.\n\nWhen \\(\\tau_L\\gg\\tau\\), the phase condition for oscillation occurs near \\(\\omega=1/\\tau\\), but there\n\\[\n|L(j\\omega)|\\approx\\frac{A^3\\tau}{2\\tau_L}\\longrightarrow 0.\n\\]\nThus, for sufficiently large \\(C_L\\), the loop gain is below unity where the phase is correct, and oscillation cannot sustain itself.\n\nAn ideal binary-inverter/delay model can miss this stabilization because it excludes the inverters’ finite-gain analog behavior.",
        "format": "markdown",
        "sha256": "b5d6684b21c985f3d5c15a3cbc93ae22be5b7107e0bd7f95b8be3237b1b61299"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large one-node capacitance can stop oscillation, explaining that the dominant pole causes loop gain to fall below unity at the phase-crossover frequency. The simplified model and DC-settling interpretation are consistent with the essential answer.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 5441,
        "total_tokens": 7493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5153,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 5441,
        "total_tokens": 7493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5153,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—for ordinary finite-gain inverters, sufficiently large \\(C_L\\) stops oscillation**, rather than merely slowing it indefinitely.\n\nTo see why, model each inverter with dc gain \\(-A\\). Let the loaded stage have time constant \\(\\tau_L\\approx R_oC_L\\), and the other two have time constant \\(\\tau\\). The loop transfer function is\n\\[\nL(s)=\\frac{-A^3}{(1+s\\tau_L)(1+s\\tau)^2}.\n\\]\n\nThe three inversions provide \\(180^\\circ\\) modulo \\(360^\\circ\\), so the poles must contribute another \\(180^\\circ\\). When \\(\\tau_L\\gg\\tau\\), that occurs near\n\\[\n\\omega_\\phi\\approx\\frac1{\\tau},\n\\]\nwhere the loaded stage contributes about \\(90^\\circ\\) of lag and the other stages contribute about \\(45^\\circ\\) each.\n\nBut at this frequency,\n\\[\n|L(j\\omega_\\phi)|\n\\approx\\frac{A^3\\tau}{2\\tau_L}\n\\longrightarrow 0\n\\qquad(C_L\\to\\infty).\n\\]\nThus, eventually the loop gain falls below unity at the required phase, and the oscillation condition cannot be met. The circuit instead settles to an **analog dc equilibrium**, typically near the inverters’ switching voltage.\n\nAn ideal Boolean/propagation-delay model can miss this effect: an odd number of inversions alone does not guarantee oscillation in a physical circuit.",
        "format": "markdown",
        "sha256": "2222f7d9669468dfd34e5da59662238adf5dccdcca91b529884a9b29945a1eaa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large capacitance on one node suppresses oscillation, and explains that its dominant pole drives the loop gain below unity at the required phase condition. The approximate model and dc-settling description are consistent with the essential answer.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 5969,
        "total_tokens": 8021,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5642,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 5969,
        "total_tokens": 8021,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5642,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise ideally improves by about 3 dB**—its power spectral density is halved at a given offset frequency.\n\nFor this CMOS ring oscillator, with fixed \\(V_{DD}\\) and channel lengths:\n\n- **Drive current and node capacitance both double**, so the delay \\(t_d\\sim CV_{DD}/I\\), oscillation frequency, and voltage swing remain approximately unchanged.\n- **Transistor noise-current PSD doubles**, since it scales with device width. But the signal charge \\(Q=CV_{\\text{swing}}\\) also doubles, giving\n  \\[\n  \\frac{\\mathcal L_{\\text{new}}}{\\mathcal L_{\\text{old}}}\n  =\\frac{2}{2^2}=\\frac12,\n  \\]\n  or a \\(3\\)-dB reduction.\n\nThe trade-off is approximately **twice the power consumption**. This assumes intrinsic transistor noise dominates and node capacitances scale with device width.",
        "format": "markdown",
        "sha256": "5c8dd2830efa6f8cb919de97646d0030bac4b8c95b62b92ad111038b4a2bcb48"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives an approximately 3 dB phase-noise reduction and supports it with the width-scaling argument: noise current PSD doubles while signal charge doubles. The stated power trade-off and assumptions are also consistent with the golden solution.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3327,
        "output_tokens": 1977,
        "total_tokens": 5304,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1771,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3327,
        "output_tokens": 1977,
        "total_tokens": 5304,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1771,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise ideally improves by about 3 dB**—its noise power spectral density is halved at a given offset frequency.\n\nAssuming fixed \\(V_{DD}\\), fixed channel lengths, and loading dominated by transistor capacitances:\n\n- **Drive current and node capacitance both double**, so the stage delay\n  \\[\n  t_d\\sim\\frac{C_{\\text{node}}V_{DD}}{I_{\\text{drive}}}\n  \\]\n  and thus the oscillation frequency remain approximately unchanged.\n- **Thermal-noise current PSD doubles**, since \\(S_i\\propto g_m\\propto W\\). However, the doubled capacitance halves the noise-to-phase conversion amplitude. Consequently,\n  \\[\n  \\frac{S_{\\phi,\\text{new}}}{S_{\\phi,\\text{old}}}\n  =\\frac{2}{2^2}=\\frac12,\n  \\]\n  corresponding to a **3 dB reduction** in device-noise-limited phase noise.\n\nThe trade-off is approximately **twice the power consumption**.",
        "format": "markdown",
        "sha256": "9fd9d0f0c7bc00a5220575b76de8f2e4c9e08ea0bbba2c96662c6c3aa7867dd7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts an approximately 3 dB phase-noise reduction and gives a consistent width-scaling explanation, including the roughly doubled power cost.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 2433,
        "total_tokens": 5760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2203,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 2433,
        "total_tokens": 5760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2203,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The phase noise ideally improves by about \\(3\\,\\mathrm{dB}\\)**—its noise-power density is halved at a given frequency offset.\n\nFor this CMOS ring oscillator, assuming fixed \\(V_{DD}\\), fixed channel lengths, and loading dominated by device capacitances:\n\n- Doubling all widths doubles both drive current and node capacitance. Thus, delay \\(t_d\\sim CV_{DD}/I\\), oscillation frequency, and voltage swing remain approximately unchanged.\n- Device noise-current PSD doubles, while the signal charge \\(q_{\\max}=CV_{\\text{swing}}\\) doubles. Since phase noise scales as \\(S_i/q_{\\max}^{2}\\),\n  \\[\n  \\frac{\\mathcal L_{\\text{new}}}{\\mathcal L_{\\text{old}}}\n  =\\frac{2}{2^2}=\\frac12.\n  \\]\n\nThis intrinsic-noise improvement costs approximately **twice the power**.",
        "format": "markdown",
        "sha256": "ba7bf8fef3e24daa43bb4971d6f2b75ce4cda897f0095330108020f796716046"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB phase-noise reduction and supports it with the width-scaling argument; it also notes the doubled power cost.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 2272,
        "total_tokens": 5599,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 2272,
        "total_tokens": 5599,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For an oscillating circuit, the relevant quantity is the **cycle-averaged supply current**. For supply variations slow compared with the oscillation frequency,\n\\[\nR_X=\\left(\\frac{d\\overline I_{DD}}{dV_{DD}}\\right)^{-1}.\n\\]\n\nAssume three identical CMOS stages, each driving a constant capacitance \\(C_L\\), with rail-to-rail swings and negligible leakage and short-circuit current. Each stage draws charge \\(C_LV_{DD}\\) once per cycle, so\n\\[\n\\overline I_{DD}=3C_LV_{DD}f_{\\mathrm{osc}}(V_{DD}).\n\\]\nTherefore,\n\\[\n\\boxed{R_X=\n\\frac{1}{3C_L\\left(f_{\\mathrm{osc}}\n+V_{DD}\\dfrac{df_{\\mathrm{osc}}}{dV_{DD}}\\right)}}.\n\\]\n\nThe frequency dependence matters: **the small-signal resistance is not generally \\(V_{DD}/\\overline I_{DD}\\)**.\n\nFor example, in the square-law CMOS approximation with thresholds neglected, \\(f_{\\mathrm{osc}}\\propto V_{DD}\\), giving\n\\[\n\\boxed{R_X\\simeq\\frac{V_{DD}}{2\\overline I_{DD}}\n=\\frac{1}{6C_Lf_{\\mathrm{osc}}}}.\n\\]\n\nThis resistance is normally positive. A numerical value requires the inverter/loading parameters or the measured supply-current characteristic; the schematic alone does not specify one.",
        "format": "markdown",
        "sha256": "d58579dca3ea8eebb6eb1918a67fe15c16227fa3c412072c76a22a1d164927e0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies oscillation-driven charging of the three load capacitances and derives the incremental resistance including the supply dependence of oscillation frequency, yielding the accepted refinement 1/(6 C_L f_osc).",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3147,
        "output_tokens": 8231,
        "total_tokens": 11378,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7902,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3147,
        "output_tokens": 8231,
        "total_tokens": 11378,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7902,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume three identical CMOS inverters, and linearize about their **symmetric dc operating point**, neglecting transistor output resistance.\n\nApply a small test voltage \\(v_x\\) to the supply. By symmetry, the three internal node-voltage changes are equal; call this voltage \\(v\\). For each inverter, the PMOS and NMOS incremental currents must match:\n\\[\ng_{mp}(v_x-v)=g_{mn}v.\n\\]\nThus,\n\\[\nv=\\frac{g_{mp}}{g_{mn}+g_{mp}}v_x.\n\\]\nThe supply delivers the sum of the three stage currents:\n\\[\ni_x=3g_{mn}v\n   =3\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}v_x.\n\\]\nTherefore,\n\\[\n\\boxed{R_X=\\frac{v_x}{i_x}\n=\\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)}.\n\\]\n\nFor equal NMOS and PMOS transconductances, \\(g_{mn}=g_{mp}=g_m\\),\n\\[\n\\boxed{R_X=\\frac{2}{3g_m}}.\n\\]\n\n**Operating-state caveat:** This is the dc-point small-signal result. For a *running* oscillator, the low-frequency, cycle-averaged supply resistance is instead\n\\[\nR_X=\\left(\\frac{d\\overline I_{DD}}{dV_{DD}}\\right)^{-1}.\n\\]\nFor capacitive switching loads \\(C_L\\) per stage and negligible short-circuit current, \\(\\overline I_{DD}=3C_LV_{DD}f_{\\rm osc}(V_{DD})\\), giving\n\\[\nR_X=\\frac{1}{3C_L\\left(f_{\\rm osc}+V_{DD}\\,\\dfrac{df_{\\rm osc}}{dV_{DD}}\\right)}.\n\\]",
        "format": "markdown",
        "sha256": "ad4e3ff4211a4e1481075e9c3233776993df26c403b26136c2415ffad66c5ff6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer identifies the oscillation-driven capacitive switching as the running oscillator’s supply-current mechanism and gives the correct general incremental resistance, including the dependence of frequency on supply voltage. The initial static gm-based result is explicitly limited to the dc operating point and does not undermine the correct running-oscillator answer.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 9746,
        "total_tokens": 12893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 9746,
        "total_tokens": 12893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming **three identical CMOS inverters**, use the small-signal model about the symmetric dc bias point and neglect transistor output conductances.\n\nApply a test voltage \\(v_x\\) to the supply. By symmetry, all three internal nodes experience the same incremental voltage \\(v\\). Thus, for this excitation, each transistor has equal gate and drain voltage increments—equivalent to a diode-connected device.\n\nFor one inverter,\n\\[\ni_{\\text{stage}}=g_{mp}(v_x-v)=g_{mn}v,\n\\]\nwhere \\(g_{mp}\\) denotes the magnitude of the pMOS transconductance. Hence,\n\\[\ni_x=3i_{\\text{stage}}\n   =3\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}\\,v_x.\n\\]\n\nTherefore,\n\\[\n\\boxed{R_X=\\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)}.\n\\]\nFor \\(g_{mn}=g_{mp}=g_m\\),\n\\[\n\\boxed{R_X=\\frac{2}{3g_m}}.\n\\]\n\n**Operating-point caveat:** This is the symmetric-dc small-signal result. For a ring already undergoing large-signal oscillation, its low-frequency, cycle-averaged supply resistance is instead\n\\[\nR_X=\\left(\\frac{d\\overline I_{DD}}{dV_{DD}}\\right)^{-1}.\n\\]\nFor capacitive switching alone, \\(\\overline I_{DD}\\simeq3C_LV_{DD}f_{\\rm osc}(V_{DD})\\), giving\n\\[\nR_X\\simeq\n\\frac{1}{3C_L\\!\\left(f_{\\rm osc}+V_{DD}\\frac{df_{\\rm osc}}{dV_{DD}}\\right)}.\n\\]\nThat operating resistance requires a device/delay model; it is not fixed by the topology alone.",
        "format": "markdown",
        "sha256": "4d6613d22d6f44634f492706abc9e6ad9f940db6cc9ab048dd646219fefcf397"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Although it foregrounds the static gm-based result, it explicitly distinguishes the oscillating case and derives the cycle-averaged resistance from switched-capacitor supply current, including the frequency-dependence term. This meets the full-credit rule.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 11459,
        "total_tokens": 14606,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11036,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 11459,
        "total_tokens": 14606,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11036,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The quoted formula applies to the symmetric DC equilibrium, not generally to the running oscillator.** The distinction is the operating state about which “small signal” is defined.\n\n### At the DC equilibrium\n\nAll three inverter outputs have the same voltage. By symmetry, a small DC supply change \\(v_x\\) produces the same change \\(v\\) at every output. Neglecting output conductances,\n\\[\ng_{mn}v=g_{mp}(v_x-v).\n\\]\nThe total supply-current change is \\(i_x=3g_{mn}v\\), giving\n\\[\nR_X=\\frac{v_x}{i_x}\n=\\frac13\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right).\n\\]\nThus the diode-connected argument works **for this symmetric operating point and perturbation**. This mathematical result remains valid even if that equilibrium is unstable.\n\n### During oscillation\n\nThe inverter voltages are phase-shifted, so an inverter’s input and output are no longer equal. Its transistors are not effectively diode-connected; their small-signal parameters vary throughout the cycle, and supply current includes capacitive charging and short-circuit current.\n\nFor a slowly varied supply, a useful definition is the **averaged differential resistance**\n\\[\n\\boxed{R_{X,\\mathrm{LF}}\n=\\left(\\frac{d\\overline{I}_{DD}}{dV_{DD}}\\right)^{-1}},\n\\]\nwhere the oscillator is allowed to adjust its waveform and frequency at each supply voltage. This is not generally \\(V_{DD}/\\overline I_{DD}\\).\n\nFor example, with approximately rail-to-rail outputs and a constant load \\(C_L\\) per stage, neglecting short-circuit current and leakage,\n\\[\n\\overline I_{DD}\\approx 3C_LV_{DD}f_{\\mathrm{osc}}(V_{DD}),\n\\]\nso\n\\[\nR_{X,\\mathrm{LF}}^{-1}\\approx\n3C_L\\left(f_{\\mathrm{osc}}\n+V_{DD}\\frac{df_{\\mathrm{osc}}}{dV_{DD}}\\right).\n\\]\n\nAt higher perturbation frequencies, one needs a periodic small-signal analysis: the supply response can be complex and can generate sidebands.\n\n**Bottom line:** oscillation does not change the algebra of the DC-equilibrium calculation, but that calculation generally does not describe the actual oscillating circuit. Its supply resistance cannot be determined from those two DC \\(g_m\\)’s alone.",
        "format": "markdown",
        "sha256": "838045473cc956ed30840b8bd919dc4f47d2f7669aaf838d4c98fbe597cb0764"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies capacitive charging as a source of average supply current and gives an expression involving oscillation frequency, but it does not establish the key conclusion that the resulting resistance remains on the order of the MOS on-resistance rather than becoming much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3227,
        "output_tokens": 8184,
        "total_tokens": 11411,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3227,
        "output_tokens": 8184,
        "total_tokens": 11411,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**That expression is a DC-operating-point result; it is not generally the supply resistance of the running oscillator.**\n\n### Why the expression arises\nFor three identical stages, the symmetric DC solution has\n\\[\nv_1=v_2=v_3=V_M.\n\\]\nIn the static small-signal equations, a supply perturbation produces equal perturbations at these nodes. Each inverter’s input and output therefore move together, making its transistors *effectively* diode-connected for this calculation. Neglecting output conductance,\n\\[\n\\delta I_{DD}\n=3\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}\\delta V_{DD},\n\\]\nwhich gives the quoted resistance. The transconductances are evaluated at that DC equilibrium, even if it is unstable.\n\n### When it is oscillating\nThe nodes have phase-shifted waveforms, and the transistor operating regions and transconductances change throughout the cycle. The diode-connected equivalence no longer applies. Small-signal analysis must now be performed around a **periodic operating trajectory**, not a fixed bias point.\n\nIf you mean the **quasistatic, cycle-averaged supply resistance**, it is\n\\[\n\\boxed{R_{X,\\mathrm{avg}}\n=\\left(\\frac{d\\overline I_{DD}}{dV_{DD}}\\right)^{-1}},\n\\]\nwith the oscillator allowed to settle to its new waveform and frequency.\n\nFor example, with a constant load capacitance \\(C_L\\) per stage, full-swing outputs, and negligible short-circuit and leakage currents,\n\\[\n\\overline I_{DD}\\simeq3C_LV_{DD}f_{\\mathrm{osc}}(V_{DD}),\n\\]\nso\n\\[\nR_{X,\\mathrm{avg}}^{-1}\\simeq\n3C_L\\left(f_{\\mathrm{osc}}\n+V_{DD}\\frac{df_{\\mathrm{osc}}}{dV_{DD}}\\right).\n\\]\nShort-circuit and leakage currents contribute additional derivatives.\n\nFor a finite-frequency supply perturbation, the response is generally a complex, frequency-dependent impedance and can include frequency conversion; periodic small-signal analysis is needed.\n\nThus, **the original formula remains the mathematical result about the symmetric DC equilibrium, but there is no universal reason for it to describe the running oscillator.** A corrected value requires the oscillating waveforms/device model and a definition of how the resistance is measured.",
        "format": "markdown",
        "sha256": "4550953f56144651ab0fa968eab6cd968f3579cdcdb8bfeee5b17a84cf96b00f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer identifies capacitive charging as the source of oscillating supply current and gives an appropriate average-current relation. However, it does not establish the key conclusion that the resulting resistance remains on the order of the MOS on-resistance or inverse transconductance, instead leaving the comparison unresolved.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 7492,
        "total_tokens": 10719,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6973,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 7492,
        "total_tokens": 10719,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6973,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The quoted expression applies to the symmetric DC operating point—not, in general, to the running oscillator.**\n\nAt that DC point, all three signal nodes have the same voltage. For a small, static supply perturbation, they move together, so each inverter is effectively diode-connected for this perturbation. Neglecting output conductances gives\n\\[\nR_{X,\\mathrm{DC}}\\simeq \\frac13\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right).\n\\]\nThis remains a valid *formal linearization about that equilibrium*, even if the equilibrium is unstable and the actual circuit starts oscillating.\n\n### During oscillation\nThe inverter inputs and outputs are phase-shifted waveforms, not equal voltages. The transconductances vary throughout the cycle, and supply current includes charging currents and transient simultaneous conduction of NMOS and PMOS devices. The diode-connected replacement therefore no longer applies.\n\nThe small-signal model about the oscillation is **periodically time-varying**. Its supply response depends on perturbation frequency and can include frequency conversion, so it is not generally described by one constant resistance.\n\n### If you mean a slowly varying supply\nA useful definition is the incremental, cycle-averaged resistance:\n\\[\nR_{X,\\mathrm{LF}}\n=\n\\left(\\frac{d\\overline I_{DD}}{dV_{DD}}\\right)^{-1},\n\\]\nwhere the oscillator is allowed to settle to its new frequency and waveform at each supply voltage. This is not simply \\(V_{DD}/\\overline I_{DD}\\).\n\nFor example, with load capacitance \\(C_L\\) per stage, rail-to-rail switching, and negligible short-circuit and leakage current,\n\\[\n\\overline I_{DD}\\approx 3C_LV_{DD}f_{\\mathrm{osc}}(V_{DD}),\n\\]\ngiving\n\\[\nR_{X,\\mathrm{LF}}\\approx\n\\frac{1}{\n3C_L\\left(f_{\\mathrm{osc}}\n+V_{DD}\\frac{df_{\\mathrm{osc}}}{dV_{DD}}\\right)\n}.\n\\]\nShort-circuit and leakage currents add their own derivatives to the conductance.\n\nThus, **the actual oscillating-state resistance generally differs**, and there is no universal corrected factor using only the two DC \\(g_m\\) values. It requires the average supply-current characteristic for the slow limit, or periodic small-signal analysis for a frequency-dependent impedance.",
        "format": "markdown",
        "sha256": "65dada9afb88ae9a2a7aba6109c896b3a58732161bab57065da68ab334ce9dd3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies capacitive charging as the oscillating-state supply-current mechanism and derives the corresponding average current. But it does not establish the key conclusion that the resistance remains on the order of the MOS on-resistance, rather than becoming much higher; its differential-resistance discussion leaves that comparison unanswered.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 5530,
        "total_tokens": 8757,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 5530,
        "total_tokens": 8757,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain **decreases** as \\(M_7\\) becomes wider.\n\nA wider \\(M_7\\) increases the tail current, making nodes \\(P\\) and \\(Q\\) discharge faster and shortening the initial amplification interval. Approximately,\n\\[\n|A_{\\text{init}}|\\propto \\frac{g_{m,\\text{in}}}{I_{\\text{tail}}}.\n\\]\nFor fixed input-transistor dimensions, \\(g_m\\) grows only as \\(\\sqrt{I_{\\text{tail}}}\\), so the increased current reduces the initial gain.",
        "format": "markdown",
        "sha256": "d03197e098f366de34b98c2b14e4677d54c9dd3f147ff1fefacefe6cae5a254b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the initial gain decreases as M7 widens and explains that increased tail current grows faster than the input-pair transconductance, reducing the gain.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 2198,
        "total_tokens": 7001,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 2198,
        "total_tokens": 7001,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain **decreases in magnitude** as \\(M_7\\) is widened, with other parameters fixed.\n\nA wider \\(M_7\\) increases the tail current, so nodes \\(P\\) and \\(Q\\) discharge faster, shortening the initial amplification interval before regeneration. Approximately,\n\\[\n|A_{\\text{init}}|\\propto \\frac{g_{m1,2}}{I_{\\text{tail}}}.\n\\]\nSince the input-pair transconductance grows only as \\(\\sqrt{I_{\\text{tail}}}\\) in strong inversion, it cannot compensate for the shorter amplification time, and the initial gain falls.",
        "format": "markdown",
        "sha256": "09e785d648e558b250f8a17612c2d6c901d0e241bf5b3a266f5e8a9a67267c7f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the initial gain decreases and explains that widening M7 raises tail current while input-pair transconductance grows only as its square root, reducing the gain ratio.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 2212,
        "total_tokens": 7015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 2212,
        "total_tokens": 7015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **initial (pre-regeneration) voltage gain decreases** as \\(M_7\\) becomes wider.\n\nA wider \\(M_7\\) draws more tail current, so nodes \\(P\\) and \\(Q\\) discharge faster, shortening the time available for initial amplification. Approximately,\n\\[\n|A_{\\text{init}}|\\approx \\frac{g_{m1,2}t_{\\text{amp}}}{C_{P,Q}}\n\\propto \\frac{g_{m1,2}}{I_{\\text{tail}}}.\n\\]\nSince \\(g_{m1,2}\\propto\\sqrt{I_{\\text{tail}}}\\) in the square-law model, the increased transconductance does not compensate for the shorter amplification time, and the initial gain falls.",
        "format": "markdown",
        "sha256": "da371c3b2434f41744bd3c5220627917c4ecd4130191d2817603958dc4d72480"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that initial gain decreases and explains that a wider M7 increases tail current while input-pair transconductance grows only as the square root of current, reducing the relevant gain factor.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 2239,
        "total_tokens": 7042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 2239,
        "total_tokens": 7042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **gain reached at the end of the initial amplification phase remains approximately unchanged**, assuming both capacitances increase equally.\n\nLarger capacitance slows the differential-voltage buildup at P and Q, but also lengthens the time before \\(M_3\\) and \\(M_4\\) turn on:\n\\[\n|A_{\\text{init}}|\\approx \\frac{g_m t_{\\text{amp}}}{C_{P,Q}},\n\\qquad\nt_{\\text{amp}}\\approx \\frac{C_{P,Q}V_{TN}}{I_{\\text{branch}}}.\n\\]\nThe capacitance therefore cancels from the gain expression.\n\nThus, the initial amplification takes longer rather than providing more gain. **At a fixed elapsed time**, however, the gain is smaller.",
        "format": "markdown",
        "sha256": "8e99cd1a3a7ed81f964dc4111fb9e165829d456732a6ccaaca671dcfe65e2b66"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is approximately unchanged: the larger capacitance slows voltage buildup but proportionally lengthens the amplification phase, so capacitance cancels. It also correctly notes the slower transient.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 4826,
        "total_tokens": 9629,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 4826,
        "total_tokens": 9629,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The initial voltage gain remains approximately unchanged**, assuming the capacitances at P and Q are increased equally.\n\nLarger capacitances slow the differential-voltage buildup, but they also proportionally lengthen the initial amplification interval before \\(M_3\\) and \\(M_4\\) turn on:\n\\[\n|A_{\\text{init}}|\\approx \\frac{g_m t_{\\text{init}}}{C},\n\\qquad\nt_{\\text{init}}\\approx \\frac{C V_{THn}}{I_{\\text{branch}}}.\n\\]\nThus,\n\\[\n|A_{\\text{init}}|\\approx \\frac{g_m V_{THn}}{I_{\\text{branch}}},\n\\]\nindependent of \\(C\\).\n\nThe main effect is **increased delay**, rather than increased gain at the end of the initial phase.",
        "format": "markdown",
        "sha256": "16e0dbbb1b0e37eeeee97a0c7e52406ae07dcff2e261d1ebb1a2e86c49b81305"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is approximately unchanged, explains the proportional increase in amplification time and cancellation of capacitance, and notes the increased delay.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 4438,
        "total_tokens": 9241,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4257,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 4438,
        "total_tokens": 9241,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4257,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain remains **approximately unchanged**, assuming the capacitances at P and Q are increased equally.\n\nLarger capacitance slows the development of the differential voltage, but it also lengthens the initial amplification interval: P and Q take longer to fall enough to turn on \\(M_3\\) and \\(M_4\\).\n\nSince\n\\[\n|A_{\\text{init}}|\\approx \\frac{g_m t_{\\text{amp}}}{C},\n\\qquad t_{\\text{amp}}\\propto C,\n\\]\nthe capacitance cancels. Thus, the main effect is **increased delay**, rather than a change in initial gain.",
        "format": "markdown",
        "sha256": "e1eedb7d5536f664c3532b9bcd830cc4793f9a316cdfd6d813c6f8f6d375fe71"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the initial gain remains approximately unchanged: the larger capacitance slows differential development but proportionally lengthens the amplification interval, so the capacitance cancels. It also correctly identifies increased delay as the main effect.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 3034,
        "total_tokens": 7837,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2894,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 3034,
        "total_tokens": 7837,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2894,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**It’s a trade-off—not necessarily a speed improvement.** In this StrongARM comparator, widening the cross-coupled PMOS devices \\(M_5\\) and \\(M_6\\) has two opposing effects:\n\n- **Stronger regeneration:** Their transconductance increases, tending to reduce the regeneration time constant:\n  \\[\n  \\tau_{\\mathrm{reg}}\\approx \\frac{C_{\\mathrm{node}}}{g_{m,\\mathrm{regen}}}.\n  \\]\n- **Greater capacitive loading:** Their gate and drain capacitances increase the load at \\(X\\) and \\(Y\\). Initially, \\(M_5\\) and \\(M_6\\) are **off**, so the added capacitance slows the discharge of these nodes before PMOS regeneration begins, with no drive-strength benefit during that interval.\n\nThus, **increasing their width can help if regeneration strength is limiting, but can degrade speed if capacitive loading dominates**. With the rest of the circuit fixed, there is typically an optimum width; larger is not always faster.",
        "format": "markdown",
        "sha256": "91ca081a09bd37651476b42f9aee94c5bbd4f79970a4c2424e3519637411494d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies stronger regeneration and added capacitance, and notes an optimum width, but misses the key initial trend: widening M5/M6 initially improves speed because the regeneration benefit dominates. Its claim that added loading may slow the initial discharge gives a misleading design conclusion.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 3700,
        "total_tokens": 8502,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3476,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 3700,
        "total_tokens": 8502,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3476,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**It can improve or degrade the overall speed—there is a sizing trade-off.** \\(M_5\\) and \\(M_6\\) are the cross-coupled PMOS regeneration devices.\n\n- **Benefit:** Increasing their widths increases their transconductance, strengthening positive feedback and potentially speeding up regeneration.\n- **Penalty:** It also increases the gate and drain capacitances at \\(X\\) and \\(Y\\). Initially, \\(M_5\\) and \\(M_6\\) are off, so this extra capacitance slows the output discharge that must occur before they turn on.\n\nA rough regeneration time constant is\n\\[\n\\tau_{\\mathrm{reg}}\\approx \\frac{C_{\\mathrm{node}}}{g_{m,\\mathrm{reg}}}.\n\\]\nWidening the PMOS devices increases both the numerator and the denominator, while also increasing the initial discharge delay.\n\nThus, **widening undersized devices can help, but excessive width can slow the comparator down**. The net effect depends on the existing sizes, tail current, and output load; it cannot be determined from the schematic alone.",
        "format": "markdown",
        "sha256": "c8e2a9b1cbdb61228532451724595cce3078c4b82f4a78f062232e5cee196142"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the cross-coupled PMOS devices and the regeneration-versus-capacitance trade-off, but misses the required initial speed improvement. It incorrectly emphasizes added capacitance as slowing the pre-regeneration discharge and concludes the net effect is indeterminate.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 4896,
        "total_tokens": 9698,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 4896,
        "total_tokens": 9698,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**It can improve or degrade the overall speed—there is a sizing trade-off.** \\(M_5\\) and \\(M_6\\) are the cross-coupled PMOS regeneration devices.\n\nIncreasing their widths has two opposing effects:\n\n- **Stronger regeneration:** Larger PMOS transconductance strengthens positive feedback. For fixed capacitance, this reduces the regeneration time constant,\n  \\[\n  \\tau_{\\mathrm{reg}}\\approx \\frac{C_{\\mathrm{node}}}{g_{m,\\mathrm{regen}}}.\n  \\]\n- **Heavier capacitive loading:** Their larger gate and drain capacitances load nodes \\(X\\) and \\(Y\\). In particular, \\(M_5,M_6\\) are initially off, so the added capacitance slows the discharge that must occur before PMOS regeneration begins.\n\nThus, **moderate upsizing may help a regeneration-limited design, but excessive upsizing can increase total clock-to-decision delay**. The deciding factor is the improvement in regenerative \\(g_m/C\\) versus the added initial discharge delay—not width alone. There is generally an optimum size.",
        "format": "markdown",
        "sha256": "56fffc1a8601fd8a4559936dcaf1f70edefba1f4f0b72cc5cc1e50378d23591d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the cross-coupled PMOS devices, regenerative-strength benefit, eventual capacitance penalty, and an optimum sizing. However, it hedges instead of stating that speed initially improves in this circuit, and overemphasizes added capacitance during the initial discharge.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 3193,
        "total_tokens": 7995,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2956,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 3193,
        "total_tokens": 7995,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2956,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**There is a tradeoff—wider clocked transistors do not always make this circuit faster.**\n\n- Increasing their width lowers their on-resistance, allowing \\(X\\) and \\(Y\\) to charge or discharge faster.\n- However, their drains are connected directly to \\(X\\) and \\(Y\\), so widening them increases the capacitance at these nodes. The unchanged signal-controlled transistors, including \\(M_1\\), must drive this extra capacitance. The clock inputs also see a larger load.\n\nA rough delay model is\n\\[\nt_d\\propto\n\\left(R_{\\text{signal}}+\\frac{a}{W_{\\text{clk}}}\\right)\n\\left(C_{\\text{fixed}}+bW_{\\text{clk}}\\right).\n\\]\nThus, there is an **optimum clock-transistor width**. Widening undersized clock devices can improve speed, but once their resistance is sufficiently small, further widening increases delay and **degrades speed**. The schematic alone does not tell us which regime applies.",
        "format": "markdown",
        "sha256": "0137e91b68792b166fa760c42201186ca4d709a66081bfcb112a32309f0327f4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by reducing clocked-device on-resistance, while added node capacitance eventually limits or reverses the benefit, producing an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 3330,
        "total_tokens": 5393,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 3330,
        "total_tokens": 5393,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**There is a trade-off: increasing the widths can improve or degrade speed.**\n\n- **Benefit:** Wider clocked transistors have lower on-resistance, allowing the enabled stages to charge or discharge \\(X\\) and \\(Y\\) faster.\n- **Penalty:** They add diffusion capacitance directly to \\(X\\) and \\(Y\\). They also increase the clock load, potentially slowing the clock edges if the clock driver is unchanged.\n\nWith the other transistor sizes fixed, a rough delay model is\n\\[\nt_d \\propto\n\\left(R_{\\text{data}}+\\frac{k}{W_{\\text{clk}}}\\right)\n\\left(C_0+cW_{\\text{clk}}\\right).\n\\]\nThe resistance decreases with width, but the capacitance increases.\n\nThus, **widening undersized clocked devices generally improves speed; widening already-strong devices can degrade it**, because the data-controlled transistors, including \\(M_1\\), ultimately limit the current while the capacitance continues to grow. There is an optimum sizing—not an unconditional benefit from making the clocked transistors wider.",
        "format": "markdown",
        "sha256": "f3e24e2207e91b2fd3bc38dcdbe555d3d6051eb6fbe0c115e911d9cca62963ba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening the clocked devices initially improves speed by reducing on-resistance, while added node capacitance can eventually limit or reverse the benefit, giving an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 2625,
        "total_tokens": 4688,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2391,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 2625,
        "total_tokens": 4688,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2391,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Increasing their widths can improve or degrade speed; there is a sizing trade-off.**\n\nWider clocked transistors have:\n- **Lower on-resistance**, which helps charge and discharge \\(X\\) and \\(Y\\).\n- **Larger diffusion capacitances at \\(X\\) and \\(Y\\)**, which slow those transitions. They also place a larger load on the clock driver.\n\nA rough delay model illustrates the competition:\n\\[\nt_d \\propto\n\\left(R_{\\text{signal}}+\\frac{a}{W_{\\text{clk}}}\\right)\n\\left(C_{\\text{fixed}}+bW_{\\text{clk}}\\right),\n\\]\nwhere \\(R_{\\text{signal}}\\) represents the unclocked transistors.\n\nIf the clocked devices are initially too small, widening them **improves speed**. Once they act as sufficiently strong switches, the unclocked devices—such as \\(M_1\\)—largely limit the current. Further widening then mainly adds capacitance and **degrades speed**.\n\nThus, making the clocked devices arbitrarily wide is not beneficial; their optimum size depends on the other device sizes and loads.",
        "format": "markdown",
        "sha256": "b4efe347adb80e35fe2f45c455527700a0942c14f6c23e2e30013b7d328875e8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by reducing on-resistance, while added node capacitance eventually limits or reverses the benefit, yielding an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 4520,
        "total_tokens": 6583,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4271,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 4520,
        "total_tokens": 6583,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4271,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—ideally, it provides quadrature outputs at half the clock frequency.**\n\n- The left clocked inverter is enabled when \\(CK=1\\), updating \\(X=\\overline Z\\).\n- The right clocked inverter is enabled when \\(CK=0\\), updating \\(Y=\\overline X\\), and hence \\(Z=\\overline Y=X\\).\n\nThe feedback causes each node to toggle once per clock cycle, so the output period is \\(T_{\\text{out}}=2T_{CK}\\). For a 50%-duty-cycle clock, corresponding transitions at \\(X\\) and \\(Z\\) are separated by \\(T_{CK}/2\\), giving\n\\[\n\\Delta\\phi=360^\\circ\\frac{T_{CK}/2}{2T_{CK}}=90^\\circ.\n\\]\n\nThus **\\(X\\) leads \\(Z\\) by \\(90^\\circ\\)**. \\(X\\) and \\(Y\\) are also in quadrature, with the opposite phase ordering; \\(Y\\) and \\(Z\\) themselves are complementary, not quadrature.\n\nClock-duty-cycle errors and propagation delays introduce practical phase error.",
        "format": "markdown",
        "sha256": "be2e3babb2a1092236167d7b5fd3de37a4a372a3a56e460df53b4c97512ac02c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature and the half-input-period transition spacing. It only alludes generally to propagation delay and omits the unequal latch loading that also makes the phase imperfect, so it does not meet the full-credit rule.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 3301,
        "total_tokens": 5349,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3052,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 3301,
        "total_tokens": 5349,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3052,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—ideally, with a 50% duty-cycle clock.** The circuit divides the clock frequency by two and provides quadrature signals at **\\(X\\) and \\(Z\\)** (also at \\(X\\) and \\(Y\\)).\n\n- The left clocked inverter is enabled when \\(CK=1\\), so \\(X\\) changes following rising clock edges.\n- The right clocked inverter is enabled when \\(CK=0\\), so \\(Y\\), and hence \\(Z=\\overline{Y}\\), change following falling edges.\n\nBoth output waveforms have period \\(2T_{CK}\\). The opposite clock edges are separated by \\(T_{CK}/2\\), corresponding to\n\\[\n\\Delta\\phi=360^\\circ\\frac{T_{CK}/2}{2T_{CK}}=90^\\circ.\n\\]\n\nThus, ideally, **\\(Z\\) lags \\(X\\) by \\(90^\\circ\\)**, while \\(Y\\) leads \\(X\\) by \\(90^\\circ\\). \\(Y\\) and \\(Z\\) themselves are complementary, not quadrature. Propagation delays and clock duty-cycle error cause deviations from exact quadrature.",
        "format": "markdown",
        "sha256": "48138c588a66c9fcb2f9f016eee9aaaee3a91300984b94b482b43c3ceec2bed4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature and its 90° phase spacing. It notes propagation delays generally, but does not explain the unequal loading of the two latches, a key source of non-ideal phase error.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 2774,
        "total_tokens": 4822,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2519,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 2774,
        "total_tokens": 4822,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2519,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—ideally, with a 50%-duty-cycle clock.** This is a dynamic divide-by-2 circuit:\n\n- When \\(CK=1\\), the left clocked inverter updates \\(X\\), while \\(Y\\) holds its value.\n- When \\(CK=0\\), the right clocked inverter updates \\(Y\\), and hence \\(Z=\\overline{Y}\\), while \\(X\\) holds.\n\nThus, \\(X\\) and \\(Z\\) toggle on opposite clock edges. Their corresponding transitions are separated by \\(T_{\\rm CK}/2\\), while their output period is \\(2T_{\\rm CK}\\). The phase separation is therefore\n\\[\n\\Delta\\phi=360^\\circ\\frac{T_{\\rm CK}/2}{2T_{\\rm CK}}=90^\\circ.\n\\]\n\nSo **\\(X\\) and \\(Z\\) are a quadrature pair**; \\(X\\) and \\(Y\\) are also in quadrature, with the opposite phase sense. \\(Y\\) and \\(Z\\) themselves are complementary, not quadrature.\n\nClock duty-cycle error and unequal propagation delays cause deviations from exact quadrature in practice.",
        "format": "markdown",
        "sha256": "6644e67eacdf8ca498937ecb127a4314dbbffc4ea62ec2935dbb794e881b655e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies nominal divide-by-two quadrature and derives the 90° phase separation. However, its nonideality caveat is generic and does not explain both required effects: Inv3 delay skews Z, and unequal latch loading causes unequal delays.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 3240,
        "total_tokens": 5288,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2987,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 3240,
        "total_tokens": 5288,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2987,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**It can improve or degrade speed; there is a sizing trade-off.**\n\nThe clocked transistors are series switches connecting each inverter to \\(V_{DD}\\) and ground. Increasing their widths has two opposing effects:\n\n- **Lower on-resistance**, approximately \\(R_{\\text{on}}\\propto 1/W\\), allows the inverter outputs to charge and discharge faster.\n- **Higher capacitance**, approximately \\(C\\propto W\\), increases the loading on \\(CK\\) and \\(\\overline{CK}\\), as well as the parasitic capacitance at the internal stack nodes. With finite clock-driver strength, this slows the clock edges.\n\nThus, **with stiff, fast clocks and switch resistance as the bottleneck, widening generally improves speed**, with diminishing returns as the data-controlled transistors become the limitation. Excessive widening can instead reduce the maximum operating frequency because of clock loading and parasitics.\n\nThe net effect therefore cannot be determined from the schematic alone; the initial sizes, parasitics, and clock-driver strength matter.",
        "format": "markdown",
        "sha256": "972a687fca52641db4a465fdbc6fde9e832b18a3b5911d0aa9752b43362c7432"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies that wider clocked switches reduce on-resistance, but it stops short of the topology’s key conclusion that speed improves. It overstates clock loading as potentially reversing the trend and misses the charge-sharing effect and why the added capacitance largely avoids loading the data path.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 4362,
        "total_tokens": 6492,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 4362,
        "total_tokens": 6492,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**There is a trade-off—not an unconditional improvement or degradation.**\n\nThe clocked transistors are in series with the pull-up and pull-down devices of the two inverters. Increasing their widths:\n\n- **Reduces their on-resistance** (\\(R_{\\text{on}}\\propto 1/W\\)), allowing faster charging and discharging of the signal nodes.\n- **Increases gate and diffusion capacitances**, adding load to \\(CK\\) and \\(\\overline{CK}\\) and capacitance at the internal stack nodes. With finite-strength clock drivers, the larger clock load slows the clock edges.\n\nThus, **with ideal clock drive and resistance-dominated delay, widening them improves speed**, with diminishing returns as the data-controlled transistors become the bottleneck. In a practical implementation, excessive widening can instead reduce speed; the best width depends on the parasitics and clock-driver strength.",
        "format": "markdown",
        "sha256": "1e153d35db451318c418b3c079088f884d9b4dd816e5a9f99c0a4fd5eb251573"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It identifies the on-resistance reduction and says widening improves speed under suitable conditions, but overemphasizes clock-loading as a practical limit and omits the key point that added capacitance is largely off the output data path and that charge sharing degrades swing but is acceptable up to a point.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 5234,
        "total_tokens": 7364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5045,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 5234,
        "total_tokens": 7364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5045,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**With a sufficiently strong clock drive, increasing the widths generally improves the speed, with diminishing returns.**\n\nThe clocked PMOS and NMOS transistors act as series switches between each inverter and the supply rails. Widening them reduces their on-resistance,\n\\[\nR_{\\text{on}}\\propto \\frac{1}{W},\n\\]\nallowing the latch outputs to charge and discharge faster.\n\nImportantly, these clocked devices are **next to the supply rails**, rather than directly connected to the latch outputs. Their increased diffusion capacitance therefore does not directly increase the main output-node capacitance.\n\nThe practical limitation is **clock loading**: their gate capacitances also grow with width. If the clock driver has finite strength, wider devices slow the clock edges and can eventually degrade the overall speed. Internal parasitics also limit the improvement.\n\nThus, widening them improves the intrinsic switching speed, but excessive sizing can hurt the complete circuit unless the clock drive is strengthened accordingly.",
        "format": "markdown",
        "sha256": "b60493ff3a04b81d5fc3ff96315e17cd0a5345e1c97a5389919ab0b106db192d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that wider clocked devices reduce series on-resistance and add little direct output loading. However, it omits charge sharing, the key limitation specified by the golden solution; clock loading is not a substitute for that point.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 5756,
        "total_tokens": 7886,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5551,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 5756,
        "total_tokens": 7886,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5551,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming each switch closes when its control signal is high, and isolated inverter inputs retain charge, the circuit is a **dynamic divide-by-2 frequency divider**.\n\nLet \\(X\\) be the output of \\(\\mathrm{Inv}_1\\), and \\(Q\\) the output of the rightmost inverter. The last two inverters together form a noninverting buffer.\n\n### Operation\n\n| Clock phase | Switch states | Circuit behavior |\n|---|---|---|\n| \\(CK=1\\) | Left closed, right open | \\(\\mathrm{Inv}_1\\) receives \\(Q\\), so \\(X=\\overline Q\\). The second inverter’s input holds its previous charge, keeping \\(Q\\) unchanged. |\n| \\(CK=0\\) | Left open, right closed | The first inverter’s input holds the previously sampled \\(Q\\), so \\(X=\\overline{Q_{\\text{old}}}\\) remains fixed. The last two inverters transfer \\(X\\) to \\(Q\\), giving \\(Q_{\\text{new}}=\\overline{Q_{\\text{old}}}\\). |\n\nThus, after every **falling clock edge**, the output toggles:\n\\[\nQ_{n+1}=\\overline{Q_n}.\n\\]\nIt takes two clock periods for the output to repeat, so\n\\[\n\\boxed{f_Q=\\frac{f_{CK}}{2}},\\qquad \\boxed{T_Q=2T_{CK}}.\n\\]\n\nThis is equivalent to a **negative-edge-triggered toggle flip-flop**. The first inverter’s output also runs at half the clock frequency, but changes after rising clock edges.\n\n### Practical considerations\n- Storage is **dynamic**, relying on capacitance at the disconnected inverter inputs; leakage limits how slowly it can operate.\n- The clock phases should not overlap appreciably. Otherwise, both switches can conduct, closing an odd-inverter loop and allowing racing or oscillation.\n- Without initialization or reset, the initial output phase is unspecified.\n\nDespite its three-inverter loop, it is **not an ordinary free-running ring oscillator**: ideally, one switch always breaks the loop.",
        "format": "markdown",
        "sha256": "4b24961eb87173ef2616f39fe0c484717bcb71ce942ec2a0c215fd85431476d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic-latch divide-by-two and explains that the output toggles once per clock period, giving half the clock frequency. The detailed phase and inverter-path claims are secondary to the correct essential answer.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 4077,
        "total_tokens": 5367,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 4077,
        "total_tokens": 5367,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming each switch closes when its labeled clock signal is high, the arrangement is a **dynamic divide-by-two circuit**, equivalent to a toggle flip-flop.\n\nLet \\(Q\\) be the output of the rightmost inverter. The two rightmost inverters together are **non-inverting**. Also assume that an isolated inverter input retains its voltage on its input capacitance.\n\n### 1. When \\(CK=1\\)\n- The first switch is closed; the \\(\\overline{CK}\\) switch is open.\n- The input of \\(\\mathrm{Inv}_1\\) becomes \\(Q\\), so its output becomes \\(\\overline Q\\).\n- The input of the second inverter retains its previous value, so \\(Q\\) remains unchanged.\n\nThus, this phase prepares the complement of the current output.\n\n### 2. When \\(CK\\) falls to 0\n- The first switch opens, storing the old value of \\(Q\\) at the input of \\(\\mathrm{Inv}_1\\).\n- The second switch closes, passing \\(\\overline{Q_{\\text{old}}}\\) through the two rightmost inverters.\n- Since those two inversions cancel,\n  \\[\n  Q_{\\text{new}}=\\overline{Q_{\\text{old}}}.\n  \\]\n\nThe changed \\(Q\\) cannot feed back into \\(\\mathrm{Inv}_1\\), because the first switch is now open. Hence there is only one toggle, not continuous oscillation.\n\n### Result\nThe output toggles shortly after every falling clock edge:\n\\[\n0\\rightarrow1\\rightarrow0\\rightarrow1\\rightarrow\\cdots\n\\]\nTwo clock periods are required for one complete output cycle:\n\\[\n\\boxed{T_Q=2T_{CK}},\\qquad\n\\boxed{f_Q=\\frac{f_{CK}}{2}}.\n\\]\n\nIt therefore behaves as a **negative-edge-triggered T flip-flop with \\(T=1\\)**.\n\n**Practical considerations:** This is dynamic storage, so leakage limits how long the clock can pause. Each phase must allow sufficient settling time, and switch overlap must be controlled to avoid race-through. If both switches remained closed, the circuit would instead be a three-inverter ring oscillator. No reset is shown, so the initial output state is unspecified.",
        "format": "markdown",
        "sha256": "b6889a46e4abae3690d814671ae8908775a2d9c6e4df68190f3e64bf75507cf8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a dynamic divide-by-two circuit. The detailed signal-path explanation is not needed for full credit under the golden solution's rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 3888,
        "total_tokens": 5178,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3401,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 3888,
        "total_tokens": 5178,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3401,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **dynamic divide-by-2 frequency divider**, equivalent to a toggle flip-flop. Assume each switch closes when its control is high and an isolated inverter input retains its voltage on its input capacitance.\n\nLet \\(X\\) be the output of \\(\\mathrm{Inv}_1\\), and \\(Q\\) the output of the rightmost inverter.\n\n### Operation\n\n| Clock phase | Switch states | Circuit behavior |\n|---|---|---|\n| \\(CK=1\\) | First closed; second open | The two rightmost inverters hold \\(Q\\). The first inverter receives \\(Q\\), so \\(X=\\overline Q\\). |\n| \\(CK=0\\) | First open; second closed | The first inverter’s input holds the previous \\(Q\\), keeping \\(X=\\overline{Q_{\\text{old}}}\\). The two rightmost inverters pass \\(X\\) through two inversions, giving \\(Q_{\\text{new}}=X\\). |\n\nThus, after each **falling clock edge** and the propagation delay,\n\\[\nQ_{\\text{new}}=\\overline{Q_{\\text{old}}}.\n\\]\nThe output therefore alternates at successive falling edges:\n\\[\n0\\;\\rightarrow\\;1\\;\\rightarrow\\;0\\;\\rightarrow\\;1\\;\\rightarrow\\cdots\n\\]\nand\n\\[\n\\boxed{T_Q=2T_{CK},\\qquad f_Q=\\frac{f_{CK}}{2}}.\n\\]\n\n### Important observations\n- **Not a free-running ring oscillator:** although the loop contains three inversions, complementary switching keeps the complete feedback path from being continuously closed.\n- **Dynamic storage:** the circuit relies on charge stored at the isolated inputs of the first and second inverters. Leakage prevents indefinite state retention if the clock stops.\n- **Clock timing matters:** suitable nonoverlap prevents both switches from conducting simultaneously and causing race-through.\n- **No reset is shown:** the initial output polarity is unspecified.",
        "format": "markdown",
        "sha256": "50309da57e1c32e76892f92f6f0715e9cfe25b5fc76ffa6db5d6d616b17caf18"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic divide-by-two and explains the output toggling at half the clock frequency. The detailed signal-path claims are secondary to the correct essential answer.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 3011,
        "total_tokens": 4301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 3011,
        "total_tokens": 4301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter **bypasses the first clocked stage**, creating a possible speed improvement—but also contention.\n\nLet \\(Q\\) be the rightmost output and \\(X\\) the output of \\(\\mathrm{Inv}_1\\). The black circuit is a dynamic divide-by-two circuit.\n\n- **When \\(CK=1\\):** The first switch is closed and the second is open. Both \\(\\mathrm{Inv}_1\\) and the red inverter drive \\(X=\\overline Q\\), so the red inverter provides additional drive.\n- **When \\(CK=0\\):** The first switch opens, storing the old input of \\(\\mathrm{Inv}_1\\). The second switch closes, and the two rightmost inverters transfer \\(X\\) to \\(Q\\). After \\(Q\\) toggles, the red inverter tries to drive \\(X\\) to the **opposite** of the value held by \\(\\mathrm{Inv}_1\\). Thus, the two inverters fight.\n\nIf the red inverter is **sufficiently weak**, this contention pulls \\(X\\) toward its next value before the next clock phase. That can shorten the subsequent transition and improve speed. The costs are:\n- Static current during contention.\n- Reduced voltage swing and noise margin.\n- Additional capacitive loading.\n\nIf it is **too strong**, it can corrupt the stored logic level. Furthermore, with the second switch closed, it forms a three-inverter feedback loop with the two rightmost inverters, potentially causing oscillation or incorrect division.\n\n**Bottom line:** it can act as a speed-up device if carefully sized, but the net speed benefit is not guaranteed; it trades power and robustness for potentially faster operation.",
        "format": "markdown",
        "sha256": "90e1bde3a03f1c1b30a94f11b64561de02a595d196e6f428d839aed45edbfe3a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the feedforward bypass and its speed benefit, and recognizes contention and the possible three-inverter loop. However, it misses the key low-frequency consequence: the unclocked branch can overwhelm the latch and raise the minimum usable clock frequency, rather than being only a problem if the inverter is too strong.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 6055,
        "total_tokens": 7214,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 6055,
        "total_tokens": 7214,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter creates an **unclocked bypass around the \\(CK\\) switch and \\(\\mathrm{Inv}_1\\)**. In this dynamic divide-by-two circuit, it can assist switching—but also introduces contention.\n\n- **When \\(CK\\) is high:** the first switch is closed and the second is open. The red inverter and \\(\\mathrm{Inv}_1\\) drive the same value. Their combined drive can improve settling speed, although the added inverter also adds capacitance.\n\n- **When \\(\\overline{CK}\\) is high:** \\(\\mathrm{Inv}_1\\) holds the inverse of the previously sampled output. The two right-hand inverters then make the output toggle. After that toggle, the red inverter drives **the opposite value to \\(\\mathrm{Inv}_1\\)**. They fight each other, increasing current and degrading logic levels and noise margins.\n\nMoreover, while the \\(\\overline{CK}\\) switch is closed, the red inverter and the two right-hand inverters form a **three-inverter feedback loop**. If the red inverter is sufficiently strong, this can cause racing or oscillation rather than clean divide-by-two operation.\n\nThus, a carefully sized red inverter may improve high-frequency switching, but it is **not a keeper or an unconditional speed improvement**. Its net effect depends on its strength and the clock timing; an overly strong one can spoil the divider’s operation.",
        "format": "markdown",
        "sha256": "91d162d9dcb2b2dc8e4293e4b3966622e7a126447baaefb8683e5ea93639c9d2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the unclocked feedforward bypass, its potential high-speed benefit, and the contention/feedback loop. It omits the key low-frequency consequence: the branch can overpower the main path and raise the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 7496,
        "total_tokens": 8655,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7198,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 7496,
        "total_tokens": 8655,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7198,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The black circuit is a **dynamic divide-by-2 circuit**. The red inverter bypasses the first clocked stage and drives the same node as \\(\\mathrm{Inv}_1\\), so its effect depends strongly on its relative strength.\n\nLet \\(Q\\) be the rightmost output and \\(X\\) the output of \\(\\mathrm{Inv}_1\\).\n\n- **When \\(CK=1\\):** the first switch is closed and the second is open. Both inverters try to make \\(X=\\overline Q\\), so the red inverter can provide additional drive.\n- **When \\(CK=0\\):** the first inverter holds its sampled value, while the two right-hand inverters transfer that value to \\(Q\\). Once \\(Q\\) changes, the red inverter tries to reverse \\(X\\), **fighting \\(\\mathrm{Inv}_1\\)**.\n\nThis creates a performance tradeoff:\n\n- **Potential speed improvement:** If deliberately weak, the red inverter pulls the internal node partway toward its *next* value. This reduces the voltage swing required on the next transition and can increase the maximum clock frequency.\n- **Power and noise-margin penalty:** The opposing outputs draw contention current, reduce logic-level margins, and add capacitance.\n- **Risk of incorrect division:** With the \\(\\overline{CK}\\) switch closed, the red inverter and the two right-hand inverters form a three-inverter feedback loop. If the red inverter is too strong, extra transitions or oscillation can occur, particularly during a long transparent clock phase.\n\n**Thus, it can serve as a carefully sized speed-up path, but it is not an unconditional improvement.** Without inverter strengths and timing information, one cannot conclude that it makes the divider faster or even preserves reliable divide-by-2 operation.",
        "format": "markdown",
        "sha256": "f33c5b17bb235600e05cf75d7baa7fb4b94c42a017936ff573a5cc5b73eb300f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the feedforward bypass, its potential speed benefit, contention, and the three-inverter loop that can cause errors during a long clock phase. However, it hedges the speed improvement and does not state the key consequence that this low-frequency failure raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 7496,
        "total_tokens": 8655,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7120,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 7496,
        "total_tokens": 8655,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7120,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not with the connections shown.** The red inverter is an **unclocked bypass of the first clocked stage**, not a keeper.\n\nCall the bottom return node \\(Q\\), the input of `Inv1` \\(X\\), and its output \\(Y\\). The two paths are\n\\[\nQ \\xrightarrow{CK\\text{ switch}} X \\xrightarrow{\\mathrm{Inv1}} Y,\n\\qquad\nQ \\xrightarrow{\\text{red inverter}} Y.\n\\]\nThus the red inverter’s **output is tied to `Inv1`’s output**. A cross-coupled keeper would instead take its input from \\(Y\\) and drive \\(X\\), on the inverter side of the clock switch.\n\n### What happens with the red inverter?\n\n- **With the \\(CK\\) switch closed:** \\(X=Q\\), so both inverters try to drive \\(Y=\\neg Q\\). The red inverter is essentially a parallel driver.\n- **With the \\(\\overline{CK}\\) switch closed:** the two right-hand inverters make \\(Q\\) follow \\(Y\\), after propagation delay. The red inverter then tries to drive \\(Y=\\neg Q\\). This creates an **odd-inversion feedback loop** through the red inverter and the two right-hand inverters—a gated ring-oscillator path, not a bistable latch.\n\nThere is an additional complication: `Inv1` is still actively driving \\(Y\\), according to the voltage stored at its isolated input \\(X\\). During the intended divider operation, once \\(Q\\) toggles, the red inverter consequently **fights `Inv1`**. Depending on relative strengths and delays, this can produce contention, invalid voltage levels, or oscillation. It is not necessarily a clean ring oscillator because `Inv1` also drives the shared node.\n\nThe leakage-sensitive storage nodes are the inputs behind the open switches. The red inverter supplies no restoring feedback to those nodes while they are isolated, so **it does not remove the leakage-imposed minimum clock frequency**.\n\nA genuine keeper for `Inv1` would be a suitably weak or clock-controlled inverter connected **from `Inv1`’s output back to its input**. Static retention of the entire divider would also require addressing the other storage node.",
        "format": "markdown",
        "sha256": "9374b8d47b6887315bd180ab3e934e3bc53c1e19e0be4f73ae668ed80d4a8750"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the feedforward bypass and odd-inversion loop. However, it misses the key tradeoff: the branch can speed high-rate operation but overpower the intended latch at low rates, raising the minimum usable clock frequency. It instead attributes the remaining limit to leakage.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 5906,
        "total_tokens": 7110,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5425,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 5906,
        "total_tokens": 7110,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5425,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not with the connections shown.** The red inverter is not cross-coupled with `Inv1`; their **outputs are connected together**.\n\nLabel the last inverter’s output \\(Q\\), `Inv1`’s input \\(X\\), and its output \\(Y\\). The paths are:\n\n\\[\nQ \\xrightarrow{\\text{CK switch}} X \\xrightarrow{\\mathrm{Inv1}} Y\n\\qquad\\text{and}\\qquad\nQ \\xrightarrow{\\text{red inverter}} Y.\n\\]\n\nThe red inverter therefore provides a **bypass/feed-forward drive** around the first clocked stage.\n\n- **CK switch closed:** \\(X=Q\\), so the two inverters are effectively in parallel, driving \\(Y\\) to the same value.\n- **CK switch open:** \\(X\\) remains a floating, dynamically stored node. The red inverter does not restore its charge, so it does not fix its leakage problem.\n\nMoreover, when the \\(\\overline{\\mathrm{CK}}\\) switch closes, the red inverter and the two right-hand inverters form a **three-inverter, odd-inversion feedback loop**, not a bistable latch. The red inverter then tends to oppose the value held by `Inv1`. For example, if \\(X=0\\), `Inv1` drives \\(Y\\) high; the following two inverters drive \\(Q\\) high; the red inverter consequently tries to drive \\(Y\\) low. Depending on strengths and delays, this produces contention, degraded levels, or potentially oscillation—not keeper action.\n\nA genuine keeper for `Inv1`’s input would have the connection\n\n\\[\nY \\xrightarrow{\\text{keeper inverter}} X,\n\\]\n\nwith its output connected **after the CK switch**, and would normally be weak or appropriately clock-gated. Making the entire divider static would also require retention at the other switched storage node.\n\nThus, the red inverter as drawn is an extra drive/feedback path that can interfere with operation; it does **not** justify the claim that the leakage-imposed minimum clock frequency is removed.",
        "format": "markdown",
        "sha256": "11a09c35930cc6518d12a48b4ac139fd47bda42d2295cc35edf55e1e75bafa4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation, identifies the feedforward bypass, and describes the opposing three-inverter loop. It misses the key frequency tradeoff: the branch can help at high speeds but overpower the intended latch at low clock rates, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 4665,
        "total_tokens": 5869,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4223,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 4665,
        "total_tokens": 5869,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4223,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not with the connections shown.** The red inverter is not cross-coupled with `Inv1`: their **outputs are tied together**.\n\nLet:\n- \\(Q\\) be the rightmost inverter’s output;\n- \\(A\\) be `Inv1`’s input, after the \\(CK\\) switch;\n- \\(B\\) be `Inv1`’s output.\n\nThe red inverter connects **\\(Q \\rightarrow B\\)**. A keeper for `Inv1` would instead connect **\\(B \\rightarrow A\\)**.\n\n### What the red inverter actually does\n\nIt provides an **inverting bypass around the first switch and `Inv1`**:\n\n- **With the \\(CK\\) switch closed**, both inverters see \\(Q\\) and drive \\(B\\) with the same polarity. They are effectively in parallel.\n- **With the \\(\\overline{CK}\\) switch closed**, the two right-hand inverters provide a non-inverting path from \\(B\\) to \\(Q\\). The red inverter then closes a **three-inverter, odd-inversion feedback loop**. The forward path tends to give \\(Q=B\\), while the red inverter tries to enforce \\(B=\\neg Q\\).\n\nMeanwhile, `Inv1` is still driving \\(B\\) according to the voltage stored at \\(A\\). Consequently, the red inverter can **fight `Inv1`**. Depending on relative strengths and delays, the result could be contention, degraded logic levels, or oscillation—not static state retention. A sufficiently weak red inverter may simply be overpowered.\n\n### Why it cannot remove the leakage limit\n\nThe red inverter does not drive either storage node when that node’s switch is open. Those nodes remain dynamic and subject to leakage.\n\nA real keeper for `Inv1` would sense \\(B\\) and weakly drive \\(A\\), **on the inverter side of the \\(CK\\) switch**, forming a two-inverter positive-feedback loop. Retention for the other dynamic stage would also be needed to make the entire divider static.\n\nThus, **as drawn, it is a clock-bypassing feedback path, not a keeper**. If a keeper was intended, the schematic is incorrect.",
        "format": "markdown",
        "sha256": "b7aca781d23795d5ce3fd5d22be3cf1e28eab28ca1e357e6ce79fae3d697f0d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter’s bypass path and the odd-inversion loop that can fight Inv1. However, it omits the key frequency tradeoff: the bypass can improve high-speed operation but can overpower the intended latch at low clock rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 5602,
        "total_tokens": 6806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5138,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 5602,
        "total_tokens": 6806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5138,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Increase the inverter’s total transconductance and use a larger feedback resistor—but co-design them so the input match is preserved.** Increasing either one independently generally changes \\(R_{\\rm in}\\).\n\nAssume \\(C_1\\) is an AC short in the operating band, and define\n\\[\nG_m=g_{m1}+g_{m2},\\qquad r_o=r_{o1}\\parallel r_{o2},\\qquad R_S=50\\,\\Omega .\n\\]\n\n### 1. Enforce the matching constraint\nNeglecting transistor capacitances, the input resistance is\n\\[\nR_{\\rm in}=\\frac{R_F+r_o}{1+G_mr_o}.\n\\]\nTherefore, the feedback resistor must satisfy\n\\[\n\\boxed{R_F=(50\\,\\Omega)(1+G_mr_o)-r_o.}\n\\]\n\nEquivalently, if \\(A_v=v_{\\rm out}/v_{\\rm in}<0\\) is the actual gate-to-drain voltage gain,\n\\[\nR_{\\rm in}=\\frac{R_F}{1+|A_v|}.\n\\]\nThus, **a larger \\(R_F\\) requires greater inverting gain to retain the \\(50\\,\\Omega\\) match.**\n\n### 2. Reduce the two principal noise contributions\nWrite the channel-noise current densities as \\(4kT\\gamma_i g_{mi}\\), and define\n\\[\n\\Gamma=\\gamma_1g_{m1}+\\gamma_2g_{m2}.\n\\]\nIgnoring gate and flicker noise, the noise factor is\n\\[\nF=1+\n\\frac{\\overbrace{\\Gamma(1+R_S/R_F)^2}^{\\text{transistor noise}}\n+\\overbrace{\\dfrac{(1+G_mR_S)^2}{R_F}}^{\\text{feedback-resistor noise}}}\n{R_S(G_m-1/R_F)^2}.\n\\]\n\nIn the regime \\(G_mR_S\\gg1\\) and \\(R_F\\gg R_S\\), this simplifies to\n\\[\nF\\simeq1+\\frac{\\Gamma}{G_m^2R_S}+\\frac{R_S}{R_F}.\n\\]\nFor equal noise coefficients, \\(\\Gamma=\\gamma G_m\\), so the transistor contribution becomes \\(\\gamma/(G_mR_S)\\).\n\nThe design strategy is therefore:\n\n- **Increase \\(g_{m1}+g_{m2}\\)** through suitable sizing and bias to lower input-referred transistor noise.\n- **Increase \\(R_F\\)** to reduce its noise-current contribution.\n- **Recalculate \\(R_F\\) using the matching equation**, accounting for changes in \\(r_o\\). At fixed \\(r_o\\), increasing \\(G_m\\) permits a larger \\(R_F\\).\n- Check power, bandwidth and parasitic capacitances; simply making both devices wider indefinitely is not an RF optimum.\n\n### Important limiting case\nIf you assume \\(r_o\\gg R_F\\) and \\(G_mr_o\\gg1\\), then\n\\[\nR_{\\rm in}\\simeq\\frac1{G_m},\n\\]\nso matching fixes \\(G_m\\simeq20\\,\\mathrm{mS}\\). **Within that approximation, increasing \\(G_m\\) is not an available noise-reduction knob.** With negligible resistor noise, \\(F\\to1+\\gamma\\), or about \\(2.2\\,\\mathrm{dB}\\) for \\(\\gamma=2/3\\).\n\nTo exploit the larger-\\(G_m\\), larger-\\(R_F\\) approach, use the full matching relation rather than assuming \\(R_{\\rm in}=1/G_m\\). A numerical optimum requires the operating frequency, device models, and power/bandwidth constraints.",
        "format": "markdown",
        "sha256": "1e77bfe205568e7ea40aacb2cd75641e222d33412b306a41ac068b4186c8be2f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Uses the finite-\fr_o\f matching relation and adjusts \fR_F\f as \fg_m\f rises, showing how transistor and feedback-resistor noise can be reduced while keeping \fR_in=50\\,\\Omega\f. The \f1+\\gamma\f limit is correctly confined to the \fR_o\\gg R_F\f approximation, not presented as the overall optimum.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 14609,
        "total_tokens": 17076,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13811,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 14609,
        "total_tokens": 17076,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13811,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Optimize the inverter transconductance and the feedback resistor together.** Increasing \\(g_m\\) alone generally changes the input match; increasing \\(R_F\\) alone does likewise.\n\nAssume \\(C_1\\) is an AC short, the source resistance is \\(R_S=50\\,\\Omega\\), and initially neglect parasitic capacitances. Define\n\\[\nG_m=g_{m1}+g_{m2},\\qquad R_o=r_{o1}\\parallel r_{o2}.\n\\]\n\n### 1. Enforce the input-match constraint\n\nSmall-signal analysis gives\n\\[\nR_{\\mathrm{in}}=\\frac{R_F+R_o}{1+G_mR_o}.\n\\]\nConsequently, every change in device sizing or bias must be accompanied by a feedback-resistor choice satisfying\n\\[\n\\boxed{R_F=50\\,\\Omega\\,(1+G_mR_o)-R_o.}\n\\]\n\nThus, for approximately constant \\(R_o\\), increasing \\(G_m\\) allows a larger \\(R_F\\) while preserving the \\(50\\,\\Omega\\) match.\n\n### 2. Minimize both noise contributions\n\nUsing the channel-noise model\n\\[\nS_{i_n}=4kTQ,\\qquad Q=\\gamma_1g_{m1}+\\gamma_2g_{m2},\n\\]\nthe midband thermal-noise factor, including \\(R_F\\), is\n\\[\nF=1+\n\\frac{Q(R_F+R_S)^2+R_F(1+G_mR_S)^2}\n{R_S(G_mR_F-1)^2},\n\\qquad NF=10\\log_{10}F.\n\\]\n\nIn the high-gain regime, with \\(G_mR_S\\gg1\\) and \\(R_F\\gg R_S\\), this simplifies to\n\\[\n\\boxed{\nF\\approx1+\n\\underbrace{\\frac{\\gamma_1g_{m1}+\\gamma_2g_{m2}}\n{(g_{m1}+g_{m2})^2R_S}}_{\\text{MOS channel noise}}\n+\\underbrace{\\frac{R_S}{R_F}}_{\\text{feedback-resistor noise}}.\n}\n\\]\nFor comparable noise coefficients, the MOS term becomes \\(\\gamma/(G_mR_S)\\).\n\n### Design implications\n\n- **Increase \\(g_{m1}+g_{m2}\\)** to reduce the channel-noise contribution. Both devices provide useful transconductance while sharing the same DC current.\n- **Use a larger \\(R_F\\)** to reduce its noise contribution, while providing sufficient inverter gain and enforcing the matching equation above.\n- **Optimize widths and bias jointly.** Increasing current can reduce \\(R_o\\), so it does not necessarily increase voltage gain. Increasing widths raises capacitance and may compromise bandwidth.\n\nAn important caveat: if you assume \\(R_o\\gg R_F\\), then \\(R_{\\mathrm{in}}\\approx1/G_m\\), and matching approximately fixes \\(G_m=20\\,\\mathrm{mS}\\). You cannot use that approximation and simultaneously claim that \\(G_m\\) can be increased without affecting the match.\n\n**There is no unique numerical optimum from \\(R_{\\mathrm{in}}=50\\,\\Omega\\) alone.** The practical optimum is the largest useful transconductance and feedback resistance consistent with the match, power budget, bandwidth, and stability.",
        "format": "markdown",
        "sha256": "1526b0b82b90381327425da001169cc3b771388adb55c72d7475d0d6e26841e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer uses the finite-output-resistance matching relation and adjusts RF upward as gm increases, allowing gm to exceed 1/RS while keeping Rin at 50 Ω. Its noise expression shows the channel-noise contribution falling with gm and the feedback-resistor contribution falling with RF, capturing how NF can go below 1 + γ; the practical power and bandwidth caveats are also appropriate.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 14189,
        "total_tokens": 16656,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 14189,
        "total_tokens": 16656,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Optimize the inverter transconductance and \\(R_F\\) together**, using the input-match constraint—not \\(R_F\\) alone.\n\nAssume \\(C_1\\) is an AC short and neglect transistor capacitances. Define\n\\[\nG_m=g_{m1}+g_{m2},\\qquad R_o=r_{o1}\\parallel r_{o2}.\n\\]\nFor the circuit shown, small-signal analysis gives\n\\[\nR_{\\rm in}=\\frac{R_F+R_o}{1+G_mR_o}.\n\\]\nTherefore, maintaining a \\(50\\,\\Omega\\) match requires\n\\[\n\\boxed{R_F=(50\\,\\Omega)(1+G_mR_o)-R_o.}\n\\]\n\n### Noise-optimization direction\n\nThe transconductances of \\(M_1\\) and \\(M_2\\) add, whereas their uncorrelated noise powers add. Their approximate input-referred thermal-noise density is\n\\[\nS_{v,n}\\simeq\n4kT\\frac{\\gamma_1g_{m1}+\\gamma_2g_{m2}}{(g_{m1}+g_{m2})^2}.\n\\]\nFor similar noise coefficients, this becomes \\(4kT\\gamma/G_m\\): **larger total transconductance means less input-referred device noise.** A larger \\(R_F\\) also reduces the feedback-resistor noise contribution.\n\nFor example, in the high-gain limit with \\(R_F\\gg R_o,R_s\\), the noise factor is approximately\n\\[\nF\\simeq1+\n\\frac{\\gamma_1g_{m1}+\\gamma_2g_{m2}}{G_m^2R_s}\n+\\frac{R_s}{R_F},\n\\qquad R_s=50\\,\\Omega.\n\\]\n\nThus the practical strategy is:\n\n- **Increase \\(g_{m1}+g_{m2}\\)** through suitable device sizing and bias, within power and bandwidth limits.\n- **Maintain sufficient inverter voltage gain** to permit a large \\(R_F\\).\n- **Retune \\(R_F\\) using the boxed equation** to preserve the \\(50\\,\\Omega\\) input resistance.\n\nIncreasing bias current alone is not necessarily optimal: it increases \\(g_m\\), but generally decreases \\(r_o\\), potentially reducing voltage gain.\n\n### Important ideal-model caveat\n\nIf you neglect channel-length modulation entirely, so \\(R_o\\to\\infty\\), the unloaded circuit instead gives\n\\[\nR_{\\rm in}=\\frac{1}{G_m}.\n\\]\nThen matching fixes \\(G_m=20\\,\\text{mS}\\); you **cannot increase \\(G_m\\)** while retaining the match in that model. Increasing \\(R_F\\) reduces the finite-feedback noise penalty, but the noise factor approaches \\(1+\\gamma\\) for equal device noise coefficients.\n\nSo the actual \\(r_o\\), operating frequency, power budget, and parasitic capacitances must be included to find a practical optimum; \\(R_{\\rm in}=50\\,\\Omega\\) alone does not specify one.",
        "format": "markdown",
        "sha256": "b5880c4dbc7ba2972f6f16b059ca3ac188e16ec712b11d4ec48179db812b81eb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly uses finite output resistance to maintain the 50 Ω match while increasing transconductance and retuning RF, reducing device noise; it also correctly distinguishes the ideal infinite-ro limit.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 15678,
        "total_tokens": 18145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 15678,
        "total_tokens": 18145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume ideal bias sources, neglect MOS output resistances and intrinsic capacitances, and treat \\(V_{DD}\\) and \\(V_b\\) as ac ground.\n\nThe \\(M_2\\)–\\(M_3\\) pair has effective transconductance\n\\[\nG_m=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}},\n\\]\nso the small-signal current delivered by \\(M_3\\) to the output is \\(i_3=G_m v_X\\). Also,\n\\[\nv_X=-g_{m1}R_{D1}v_P.\n\\]\nDefine the unloaded voltage-gain magnitude\n\\[\nA=g_{m1}R_{D1}G_mR_{D2}.\n\\]\n\nTo find the resistance looking right from \\(P\\), inject a test current \\(i_t\\). Since the MOS gate draws no current,\n\\[\nv_P-v_{\\text{out}}=i_tR_F.\n\\]\nOutput-node KCL gives\n\\[\nv_{\\text{out}}=R_{D2}(i_t+i_3)\n=i_tR_{D2}-Av_P.\n\\]\nCombining these,\n\\[\n\\boxed{\nR_{\\text{in}}=\n\\frac{R_F+R_{D2}}\n{1+g_{m1}R_{D1}R_{D2}\n\\displaystyle\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}}\n}.\n\\]\n\nFor **matched \\(M_2,M_3\\)**, with \\(g_{m2}=g_{m3}=g_m\\),\n\\[\n\\boxed{R_{\\text{in}}=\n\\frac{R_F+R_{D2}}\n{1+\\frac12 g_{m1}g_mR_{D1}R_{D2}}}.\n\\]\n\nIncluding the shunt input capacitor, the impedance seen by \\(I_{\\text{in}}\\) is\n\\[\n\\boxed{\nZ_{\\text{in}}(j\\omega)\n=R_{\\text{in}}\\parallel\\frac{1}{j\\omega C_{\\text{in}}}\n=\\frac{R_{\\text{in}}}{1+j\\omega R_{\\text{in}}C_{\\text{in}}}\n}.\n\\]\nIf \\(R_F\\gg R_{D2}\\), the resistance simplifies to \\(R_{\\text{in}}\\approx R_F/(1+A)\\).",
        "format": "markdown",
        "sha256": "d480528cd0442162a0ad3c9e0ae3de0e4d2c6eb2d87ce632098a57cc3fa5110b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact Miller-theorem resistance, including the output-side resistance: (RF + RD2)/(1 + A0). Its matched-device gain agrees with A0 = (1/2)gm1 gm2,3 RD1 RD2; the added capacitance discussion does not undermine the result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 4153,
        "total_tokens": 4363,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 4153,
        "total_tokens": 4363,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume ideal bias sources, negligible MOS output conductances (\\(r_o\\to\\infty\\)), and no intrinsic transistor capacitances. \\(V_{DD}\\) and \\(V_b\\) are ac grounds.\n\nThe effective transconductance from \\(X\\) to the output through \\(M_2,M_3\\) is\n\\[\nG_m=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}},\n\\]\nwhich equals \\(g_m/2\\) for matched devices.\n\nApply a test voltage \\(v_p\\) at the input. Then\n\\[\nv_x=-g_{m1}R_{D1}v_p.\n\\]\nWriting \\(i_F=(v_p-v_{\\text{out}})/R_F\\), output-node KCL gives\n\\[\n\\frac{v_{\\text{out}}}{R_{D2}}=G_m v_x+i_F.\n\\]\nSubstituting \\(v_{\\text{out}}=v_p-i_FR_F\\) yields\n\\[\nv_p\\left(1+g_{m1}R_{D1}G_mR_{D2}\\right)\n=i_F(R_F+R_{D2}).\n\\]\n\nThus, **the resistance looking right into \\(P\\)**, excluding \\(C_{\\text{in}}\\), is\n\\[\n\\boxed{\nR_{\\text{in}}\n=\\frac{R_F+R_{D2}}\n{1+g_{m1}R_{D1}G_mR_{D2}}\n}.\n\\]\nFor matched \\(M_2,M_3\\),\n\\[\n\\boxed{\nR_{\\text{in}}\n=\\frac{R_F+R_{D2}}\n{1+\\frac12 g_{m1}g_mR_{D1}R_{D2}}\n}.\n\\]\n\n**Including \\(C_{\\text{in}}\\)**, the impedance seen by the input current source is\n\\[\n\\boxed{\nZ_{\\text{in}}(s)\n=R_{\\text{in}}\\parallel\\frac{1}{sC_{\\text{in}}}\n=\\frac{R_F+R_{D2}}\n{1+g_{m1}R_{D1}G_mR_{D2}\n+sC_{\\text{in}}(R_F+R_{D2})}\n},\\qquad s=j\\omega.\n\\]",
        "format": "markdown",
        "sha256": "124a33a2920e21a80c702eb540facb47e655281d54ba0c59886bdf1de70ba1e1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer derives the exact input resistance, including the output-side resistance: (RF + RD2)/(1 + A0), with A0 matching the golden solution for matched M2 and M3. The added input-capacitance expression is consistent with its stated assumptions.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 6204,
        "total_tokens": 6414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 6204,
        "total_tokens": 6414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume an ideal bias current source and neglect MOS output resistances and intrinsic capacitances. \\(V_{DD}\\) and \\(V_b\\) are AC grounds.\n\nBecause the total current in \\(M_2,M_3\\) is fixed, their effective transconductance from \\(v_x\\) to the current injected into the output is\n\\[\ng_{\\rm eq}=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\n\\quad \\left(=\\frac{g_m}{2}\\text{ for a matched pair}\\right).\n\\]\n\nApply a test voltage \\(v_p\\), and let \\(i\\) enter the circuit **to the right of \\(C_{\\rm in}\\)**. Then\n\\[\nv_x=-g_{m1}R_{D1}v_p,\\qquad\nv_o=R_{D2}(i+g_{\\rm eq}v_x),\\qquad\nv_p=v_o+iR_F.\n\\]\nCombining these gives\n\\[\n\\boxed{\nR_{\\rm in}=\\frac{v_p}{i}\n=\\frac{R_F+R_{D2}}\n{1+g_{m1}R_{D1}g_{\\rm eq}R_{D2}}\n}.\n\\]\n\nFor matched \\(M_2,M_3\\), this becomes\n\\[\n\\boxed{\nR_{\\rm in}=\n\\frac{R_F+R_{D2}}\n{1+\\frac12 g_{m1}g_mR_{D1}R_{D2}}\n}.\n\\]\n\nIncluding the shown input capacitor, the total impedance seen by \\(I_{\\rm in}\\) is\n\\[\n\\boxed{\nZ_{\\rm in}(s)\n=R_{\\rm in}\\parallel\\frac{1}{sC_{\\rm in}}\n=\\frac{R_{\\rm in}}{1+sR_{\\rm in}C_{\\rm in}}\n}.\n\\]",
        "format": "markdown",
        "sha256": "9ca33560f2496c6bf5f5155cea8d9f0125149166149ca0ece0e18d11e83275d2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Derives the exact input resistance, including the output-side resistance of the feedback path: (RF + RD2)/(1 + A0). Its matched-pair expression agrees with the golden solution; the added input-capacitance result is consistent with the stated assumptions.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 5591,
        "total_tokens": 5801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 5591,
        "total_tokens": 5801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO noise produces **frequency modulation through supply pushing**, which is then integrated into phase noise.\n\nAssume \\(S_{\\rm th}(f_m)\\) is the **one-sided voltage-noise PSD at the LDO output**, in \\(\\mathrm{V^2/Hz}\\), and \\(f_m\\) is the offset from the VCO carrier.\n\n### 1. Determine the supply-to-frequency sensitivity\nDefine\n\\[\nK_{\\rm sup}=\\left.\\frac{\\partial f_{\\rm osc}}{\\partial V_{\\rm out}}\\right|_{V_{\\rm cont}\\,\\text{fixed}}\n\\qquad [\\mathrm{Hz/V}].\n\\]\n\nIn this circuit, low-frequency supply noise moves the common-mode voltages of \\(X\\) and \\(Y\\). This changes the bias across both varactors and therefore their capacitance. **The resulting frequency modulation does not cancel in the differential output.**\n\nIf varactor-bias modulation is the dominant coupling mechanism, capacitance depends on \\(V_{\\rm out}-V_{\\rm cont}\\), giving approximately\n\\[\nK_{\\rm sup}\\simeq-K_{\\rm VCO},\n\\qquad K_{\\rm VCO}=\\frac{\\partial f_{\\rm osc}}{\\partial V_{\\rm cont}}.\n\\]\nFor better accuracy, extract \\(K_{\\rm sup}\\) from simulation or measurement.\n\n### 2. Convert frequency noise into phase noise\nFor a small LDO noise voltage \\(v_n(t)\\),\n\\[\n\\delta f(t)=K_{\\rm sup}v_n(t),\n\\qquad\n\\frac{d\\phi(t)}{dt}=2\\pi\\delta f(t).\n\\]\nConsequently,\n\\[\n\\boxed{S_\\phi(f_m)=\\frac{K_{\\rm sup}^{\\,2}}{f_m^2}\\,S_{\\rm th}(f_m)}\n\\qquad [\\mathrm{rad^2/Hz}].\n\\]\n\nThe corresponding small-noise, single-sideband phase noise is\n\\[\n\\boxed{\\mathcal L_{\\rm LDO}(f_m)\n=\\frac{S_\\phi(f_m)}{2}\n=\\frac{K_{\\rm sup}^{\\,2}S_{\\rm th}(f_m)}{2f_m^2}}\n\\]\nor, in \\(\\mathrm{dBc/Hz}\\),\n\\[\n\\boxed{\\mathcal L_{\\rm LDO,dB}(f_m)\n=10\\log_{10}\\!\\left[\n\\frac{K_{\\rm sup}^{\\,2}S_{\\rm th}(f_m)}{2f_m^2}\n\\right]}.\n\\]\n\nThus, **white LDO thermal noise produces a \\(1/f_m^2\\) phase-noise contribution** (\\(-20\\ \\mathrm{dB/decade}\\)) where the supply-pushing gain is approximately constant. If the gain is specified in \\(\\mathrm{rad/s/V}\\), replace \\(K_{\\rm sup}\\) above by \\(K_{\\omega,\\rm sup}/(2\\pi)\\).\n\nThis is only the LDO-induced contribution; other independent VCO noise contributions are added in linear PSD units.",
        "format": "markdown",
        "sha256": "31b6f437829579c115540f0f35241a72b06b1d8e08ab1f7f3eb787b54af6a153"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, relates the sensitivity to KVCO through the varactors, and converts LDO voltage-noise PSD to phase noise with the required 1/f_m² dependence. The formulas and stated PSD convention are consistent with the golden solution.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 5837,
        "total_tokens": 9231,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 5837,
        "total_tokens": 9231,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Compute the LDO noise contribution using the VCO’s **supply-pushing sensitivity**. The noise spectrum alone is not sufficient.\n\nAssume \\(S_{\\rm th}(f_m)\\) is the **one-sided voltage-noise PSD at \\(V_{\\rm out}\\)**, in \\(\\mathrm{V^2/Hz}\\), and \\(f_m\\) is the offset from the carrier. Define\n\\[\nK_s=\\left.\\frac{\\partial f_{\\rm osc}}{\\partial V_{\\rm out}}\\right|_{V_{\\rm cont}}\n\\qquad [\\mathrm{Hz/V}].\n\\]\n\n### Supply noise to phase noise\nFor small supply fluctuations, in the quasistatic limit,\n\\[\n\\delta f(t)=K_s v_n(t),\n\\qquad\n\\phi(t)=2\\pi K_s\\int v_n(t)\\,dt.\n\\]\nThus the phase-noise PSD is\n\\[\n\\boxed{S_{\\phi,\\rm LDO}(f_m)\n=\\frac{K_s^2}{f_m^2}S_{\\rm th}(f_m)}\n\\qquad [\\mathrm{rad^2/Hz}].\n\\]\n\nThe corresponding single-sideband phase noise is\n\\[\n\\boxed{\\mathcal L_{\\rm LDO}(f_m)\n=10\\log_{10}\\!\\left[\n\\frac{K_s^2 S_{\\rm th}(f_m)}{2f_m^2}\n\\right]\\quad\\mathrm{dBc/Hz}.}\n\\]\nThe factor \\(1/2\\) converts a one-sided phase PSD to SSB phase noise. If the sensitivity is specified as \\(K_\\omega=\\partial\\omega_{\\rm osc}/\\partial V_{\\rm out}\\) in \\(\\mathrm{rad/s/V}\\), replace \\(K_s/f_m\\) by \\(K_\\omega/(2\\pi f_m)\\).\n\n### Why supply noise matters in this circuit\nAt low frequencies, the common-mode voltages of \\(X\\) and \\(Y\\) follow \\(V_{\\rm out}\\). This changes the MOS-varactor bias, approximately \\(V_{\\rm out}-V_{\\rm cont}\\), changing the tank capacitance and hence the oscillation frequency. **Common-mode voltage noise therefore need not cancel as phase noise.**\n\nIf this varactor-bias mechanism dominates and the oscillation amplitude remains approximately fixed,\n\\[\nK_s\\approx-K_{\\rm VCO},\n\\qquad\nK_{\\rm VCO}=\\frac{\\partial f_{\\rm osc}}{\\partial V_{\\rm cont}},\n\\]\nso the usual tuning gain can be used in the formula. Otherwise, extract \\(K_s\\) by varying \\(V_{\\rm out}\\) with \\(V_{\\rm cont}\\) fixed, or use periodic small-signal/noise simulation to include dynamic effects.\n\nWhite \\(S_{\\rm th}\\) produces a \\(1/f_m^2\\) phase-noise contribution. Add intrinsic VCO noise separately in **linear PSD units**, not in dB.",
        "format": "markdown",
        "sha256": "1df16aae179324b5a4e3042eb4c23f57786bdefb87297019e04e277358c21079"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly converts LDO supply-noise PSD through the supply-pushing sensitivity into phase noise with the required 1/f_m^2 dependence and SSB relation. It also captures the varactor-bias mechanism and its connection to K_VCO; the extra assumptions and details are consistent with the golden solution.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 7838,
        "total_tokens": 11232,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7206,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 7838,
        "total_tokens": 11232,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7206,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO noise causes **frequency modulation through the VCO’s supply sensitivity**. You therefore need the supply-pushing gain, not just the LDO noise spectrum.\n\n### 1. Convert supply noise to phase noise\nAssume \\(S_{\\mathrm{th}}(f_m)\\) is the **one-sided voltage-noise PSD at \\(V_{\\mathrm{out}}\\)**, in \\(\\mathrm{V^2/Hz}\\). Define\n\\[\nK_{\\mathrm{push}}\n=\\left.\\frac{\\partial f_{\\mathrm{osc}}}{\\partial V_{\\mathrm{out}}}\\right|_{V_{\\mathrm{cont}}}\n\\qquad [\\mathrm{Hz/V}].\n\\]\n\nFor a small supply perturbation \\(v_n(t)\\),\n\\[\n\\delta f(t)=K_{\\mathrm{push}}v_n(t),\n\\qquad\n\\phi_n(t)=2\\pi K_{\\mathrm{push}}\\int v_n(t)\\,dt.\n\\]\n\nThus, at offset frequency \\(f_m\\), the LDO-induced phase-noise PSD is\n\\[\n\\boxed{\nS_{\\phi,\\mathrm{LDO}}(f_m)\n=\\frac{K_{\\mathrm{push}}^2}{f_m^2}\\,S_{\\mathrm{th}}(f_m)\n}\n\\qquad [\\mathrm{rad^2/Hz}].\n\\]\n\nThe corresponding single-sideband phase noise is\n\\[\n\\boxed{\n\\mathcal L_{\\mathrm{LDO}}(f_m)\n=10\\log_{10}\\!\\left[\n\\frac{K_{\\mathrm{push}}^2 S_{\\mathrm{th}}(f_m)}\n{2f_m^2}\n\\right]\n\\quad \\mathrm{dBc/Hz}.\n}\n\\]\n\nIf the gain is instead specified as \\(K_{\\omega}=\\partial\\omega_{\\mathrm{osc}}/\\partial V_{\\mathrm{out}}\\) in \\(\\mathrm{rad/s/V}\\), use \\(K_{\\omega}^2/(2\\pi f_m)^2\\) in place of \\(K_{\\mathrm{push}}^2/f_m^2\\).\n\n### 2. Supply sensitivity in this circuit\nAt low offset frequencies, the common-mode voltage of \\(X\\) and \\(Y\\) approximately follows \\(V_{\\mathrm{out}}\\). The MOS varactors therefore see a bias approximately equal to\n\\[\nV_{\\mathrm{var}}\\approx V_{\\mathrm{out}}-V_{\\mathrm{cont}}.\n\\]\nSupply noise changes both varactor capacitances and hence the resonant frequency. **Differential symmetry does not cancel this frequency modulation.**\n\nIf this varactor mechanism dominates and \\(V_{\\mathrm{cont}}\\) is quiet,\n\\[\nK_{\\mathrm{push}}\\approx -K_{\\mathrm{VCO}},\n\\qquad\nK_{\\mathrm{VCO}}=\\frac{\\partial f_{\\mathrm{osc}}}{\\partial V_{\\mathrm{cont}}},\n\\]\nso \\(K_{\\mathrm{VCO}}^2\\) can replace \\(K_{\\mathrm{push}}^2\\) above. Otherwise, obtain \\(K_{\\mathrm{push}}\\) from a supply sweep or an appropriate supply-to-phase simulation.\n\nWhite LDO noise produces a \\(1/f_m^2\\) phase-noise contribution. If \\(S_{\\mathrm{th}}\\) describes an internal LDO source, first refer it to \\(V_{\\mathrm{out}}\\) through the LDO’s noise transfer function. Intrinsic VCO phase noise must be added separately in linear PSD units.",
        "format": "markdown",
        "sha256": "d46559f5908bc9c0df02ae3243a5c2b7276ec57ecb4e9f673a1764085ce2c533"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly converts LDO output noise through the supply-pushing sensitivity into phase noise with the required 1/f_m^2 dependence, and identifies the direct varactor coupling and its relationship to KVCO. The stated PSD/SSB factors and assumptions are consistent with the golden solution.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 5888,
        "total_tokens": 9282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 5888,
        "total_tokens": 9282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**With an ideal, noiseless tail current source, adding \\(C_T\\) generally worsens phase noise.** It removes some of the noise suppression provided by the high-impedance tail.\n\nTo see why, consider the part of the cycle when \\(M_1\\) is on and \\(M_2\\) is off:\n\n- **Without \\(C_T\\):** The ideal tail source fixes \\(M_1\\)’s drain current at \\(I_{SS}\\). Its channel noise mainly produces a fluctuation of the source voltage \\(v_P\\), rather than a noise current entering the tank.\n- **With \\(C_T\\):** The capacitor provides an AC return path and restricts that source-voltage movement. Consequently, \\(M_1\\)’s channel-noise current can now flow into the tank and contribute to phase noise. The same applies to \\(M_2\\) in the opposite half-cycle.\n\nAt large swings, there is another potential penalty: when the conducting transistor enters triode, the low tail impedance can let it load the tank, reducing the effective \\(Q\\).\n\n**For a real, noisy tail source, there is a tradeoff:** \\(C_T\\) can bypass its RF noise—particularly noise near \\(2f_0\\) that would otherwise be converted into phase noise. Thus, total phase noise can improve or worsen depending on whether this benefit outweighs the extra core-noise contribution and tank loading.",
        "format": "markdown",
        "sha256": "555a4d9960373baf1eb5654c42c00239393eed9035d4d76111edb0317725c135"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It recognizes a tradeoff, including tail-noise filtering and a triode-region penalty. However, it misses the key class-C mechanism—peak tank currents exceeding ISS can reduce phase noise—and instead centers an unsupported claim that CT generally worsens phase noise with an ideal tail source.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 6518,
        "total_tokens": 10085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 6518,
        "total_tokens": 10085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**\\(C_T\\) reduces some tail-source noise, but it does not necessarily reduce the total phase noise.** Two effects compete:\n\n- **Noise filtering:** \\(C_T\\) bypasses high-frequency noise from \\(I_{SS}\\), particularly noise near \\(2f_0\\) that the switching pair can mix into the vicinity of the carrier. This reduces the tail-current source’s phase-noise contribution.\n\n- **Tank loading:** A large \\(C_T\\) holds \\(P\\) approximately at AC ground. With a large oscillation swing, the conducting transistor enters triode, creating a lossy path from the tank through its channel to \\(C_T\\). The resulting energy dissipation lowers the effective tank \\(Q\\), and can reduce the oscillation amplitude—both detrimental to phase noise. The capacitor itself is not the noisy or dissipative element; the transistor channel is.\n\nThus, **a large \\(C_T\\) can actually worsen phase noise in this conventional large-swing oscillator**, despite filtering tail-source noise. It helps only if the noise reduction outweighs the additional loading and waveform changes.\n\nAlso, an RF-sized \\(C_T\\) generally does **not** bypass low-frequency tail flicker noise, so it is not automatically a cure for close-in \\(1/f^3\\) phase noise.",
        "format": "markdown",
        "sha256": "0f55ba93a5a0608bd2336a6b361b3dbd4300fdcfbf9e5c799c2e9b18817eb8a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It recognizes a competing, potentially nonmonotonic effect and a triode/channel-loading degradation, but misses the key class-C improvement in which peak tank currents exceed ISS, instead attributing the benefit to 2f0 tail-noise filtering.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 6822,
        "total_tokens": 10389,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6546,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 6822,
        "total_tokens": 10389,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6546,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Adding \\(C_T\\) does not necessarily reduce phase noise—it introduces a trade-off.**\n\n- **Benefit: it bypasses tail-current-source noise.** At high frequencies, \\(C_T\\) shunts noise from \\(I_{SS}\\) away from the switching pair. In particular, it can suppress noise near \\(2f_0\\) that would otherwise mix into sidebands near the carrier. It does **not** directly bypass low-frequency flicker noise.\n\n- **Penalty: it can increase the pair’s noise contribution and load the tank.** Without \\(C_T\\), when only one transistor conducts, the high tail impedance suppresses that transistor’s drain-current fluctuations. \\(C_T\\) provides an AC return path, weakening this suppression.\n\n  More importantly, at large oscillation amplitudes the conducting transistor can enter triode. For example, when \\(X\\) is low and \\(Y\\) is high, \\(M_1\\) is strongly on. With a large \\(C_T\\), the tank then sees a lossy path\n  \\[\n  X\\;\\rightarrow\\;r_{\\mathrm{on},M_1}\\;\\rightarrow\\;C_T\\;\\rightarrow\\;\\text{ground}.\n  \\]\n  This reduces the effective tank \\(Q\\), and often the oscillation amplitude, worsening phase noise.\n\n**Thus, an appropriately chosen \\(C_T\\) can help if tail-source noise dominates, but a large bypass capacitor can make total phase noise worse—especially in a large-swing oscillator.** The net result cannot be determined from the capacitor alone.",
        "format": "markdown",
        "sha256": "119aabc4a065d81a0a6606b255bd391572f455029777ea4c785b742bcd1a20c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly describes a trade-off and identifies triode operation as a possible degradation, but misses the key class-C improvement mechanism: peak tank currents exceeding ISS. Its claimed benefit relies instead on generic tail-noise filtering.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 6441,
        "total_tokens": 10008,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6107,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 6441,
        "total_tokens": 10008,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6107,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **quadrature LC oscillator**: the pairs biased by \\(I_{\\rm SS}\\) sustain oscillation, while those biased by \\(I_1\\) couple the two cores.\n\nLet each inductor be \\(L\\), and let \\(C_T\\) be the total capacitance at each output node, including the MOS parasitics (capacitors are not explicitly drawn). The uncoupled tank frequency is\n\\[\nf_0=\\frac{1}{2\\pi\\sqrt{LC_T}}.\n\\]\n\nThe coupling pulls the oscillation slightly away from resonance. For a tank with loaded quality factor \\(Q\\), and assuming fully switching differential pairs, the coupling-to-core fundamental-current ratio is approximately \\(I_1/I_{\\rm SS}\\). Consequently,\n\\[\nQ\\left(\\frac{\\omega}{\\omega_0}-\\frac{\\omega_0}{\\omega}\\right)\n=\\pm\\frac{I_1}{I_{\\rm SS}}.\n\\]\nFor small detuning, this gives\n\\[\n\\boxed{f_{\\rm osc}\\approx\n\\frac{1}{2\\pi\\sqrt{LC_T}}\n\\left(1\\pm\\frac{I_1}{2Q I_{\\rm SS}}\\right)}.\n\\]\nThe signs correspond to the two possible quadrature phase sequences.\n\nThus, to a first approximation, **\\(f_{\\rm osc}\\approx f_0\\)**. A numerical estimate requires the inductance and total node capacitance; \\(Q\\) and the current ratio are also needed to estimate the coupling-induced shift.",
        "format": "markdown",
        "sha256": "d93363d96451b77d2001bdbf0be8090c58a5f8020d54fce236e23ae477fbcae7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives the tank resonance and the coupling-induced shift proportional to (I1/ISS)/(2Q), including the two possible quadrature modes.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 7014,
        "total_tokens": 8815,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6681,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 7014,
        "total_tokens": 8815,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6681,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **quadrature-coupled LC oscillator**. Let each load inductor be \\(L\\), and let \\(C_T\\) be the total capacitance at each output node, including MOS parasitics—the capacitors are not explicitly drawn.\n\nThe first-order frequency estimate is\n\\[\n\\boxed{f_0 \\approx \\frac{1}{2\\pi\\sqrt{LC_T}}.}\n\\]\n\nThe \\(I_1\\)-biased pairs couple the two oscillators and pull their frequency away from tank resonance. For identical tanks of quality factor \\(Q\\), define \\(k\\) as the ratio of coupling-current to sustaining-current fundamentals. If the pairs fully switch their tail currents,\n\\[\nk\\approx \\frac{I_1}{I_{\\mathrm{SS}}}.\n\\]\nBecause these currents are in quadrature, the tank phase condition is\n\\[\nQ\\left(\\frac{f}{f_0}-\\frac{f_0}{f}\\right)=\\pm k.\n\\]\nHence\n\\[\n\\boxed{\nf_\\pm=f_0\\left[\\sqrt{1+\\left(\\frac{k}{2Q}\\right)^2}\n\\ \\pm\\frac{k}{2Q}\\right]\n\\approx f_0\\left(1\\pm\\frac{I_1}{2Q I_{\\mathrm{SS}}}\\right).\n}\n\\]\nThe signs correspond to the two possible quadrature phase sequences. For high \\(Q\\) and modest coupling, \\(f_{\\mathrm{osc}}\\approx f_0\\) is a reasonable estimate.\n\n**A numerical frequency cannot be obtained from the figure alone:** \\(L\\) and \\(C_T\\) are unspecified.",
        "format": "markdown",
        "sha256": "3da884ea9757f437e18097d62404818ca02c76962c73a5da3c06076cfe33d690"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the tank resonance and the coupling-induced shift \u00177f0 I1/(2Q ISS), including the two possible quadrature modes. This matches the golden solution; the extra exact-form expression is consistent with the stated first-order estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 11075,
        "total_tokens": 12876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10716,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 11075,
        "total_tokens": 12876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10716,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-astra",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **quadrature-coupled LC oscillator**. Let each inductor be \\(L\\), and let \\(C_T\\) be the total capacitance at each output node, including MOS and wiring capacitances—the capacitors are not explicitly drawn.\n\nFor weak coupling through the \\(I_1\\)-biased pairs,\n\\[\n\\boxed{f_{\\mathrm{osc}}\\approx \\frac{1}{2\\pi\\sqrt{LC_T}}.}\n\\]\nThe two oscillator cores operate at the same frequency, with their differential outputs approximately \\(90^\\circ\\) apart.\n\nFor appreciable coupling, the frequency is pulled away from the tank resonance. If \\(g_{mc}\\) is the effective per-device transconductance of the coupling pair, the idealized quadrature condition, after tank losses are cancelled, is\n\\[\n\\omega C_T-\\frac{1}{\\omega L}=\\pm g_{mc}.\n\\]\nThus the two possible quadrature modes have\n\\[\n\\omega_{\\pm}\\approx\n\\sqrt{\\frac{1}{LC_T}+\\left(\\frac{g_{mc}}{2C_T}\\right)^2}\n\\ \\pm\\frac{g_{mc}}{2C_T}.\n\\]\n\nA numerical estimate requires the inductance and node capacitances, neither of which is specified in the figure.",
        "format": "markdown",
        "sha256": "88231dea39d2c4f8dcd3ca23759ebb8d6e29e589eeead1564ced88f6fccc149c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives the tank resonance and recognizes coupling-induced frequency pulling, but its only shift is effectively ±gmc/(2CT). It omits the required coupling factor, such as (gmc/gm1)ω0/(2Q), and therefore assumes the edge-of-oscillation condition without stating it.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 11677,
        "total_tokens": 13478,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 11677,
        "total_tokens": 13478,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    }
  ]
}
