{
  "model_key": "gpt_6_luna",
  "display_name": "GPT-6 Luna",
  "provider": "openai",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "GPT-6 Luna answered the 50 tasks in three rollouts through OpenRouter's chat completions route (openai/gpt-6-luna) at maximum reasoning effort. Requests set max_tokens to 128,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for GPT-6 Luna on 2026-11-10 ($0.10 input, $0.01 cached input, $0.50 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 90,
          "incorrect_count": 60,
          "partial_credit_count": 48,
          "zero_count": 12,
          "mean_score_0_to_4": 3.02,
          "score_percent": 75.5,
          "score_distribution": {
            "0": 12,
            "1": 17,
            "2": 17,
            "3": 14,
            "4": 90
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 90,
          "incorrect_count": 60,
          "partial_credit_count": 48,
          "zero_count": 12,
          "mean_score_0_to_4": 3.02,
          "score_percent": 75.5,
          "score_distribution": {
            "0": 12,
            "1": 17,
            "2": 17,
            "3": 14,
            "4": 90
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 67,
          "incorrect_count": 23,
          "partial_credit_count": 11,
          "zero_count": 12,
          "mean_score_0_to_4": 3.2333333333333334,
          "score_percent": 80.83333333333333,
          "score_distribution": {
            "0": 12,
            "1": 2,
            "2": 6,
            "3": 3,
            "4": 67
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 67,
          "incorrect_count": 23,
          "partial_credit_count": 11,
          "zero_count": 12,
          "mean_score_0_to_4": 3.2333333333333334,
          "score_percent": 80.83333333333333,
          "score_distribution": {
            "0": 12,
            "1": 2,
            "2": 6,
            "3": 3,
            "4": 67
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 23,
          "incorrect_count": 37,
          "partial_credit_count": 37,
          "zero_count": 0,
          "mean_score_0_to_4": 2.7,
          "score_percent": 67.5,
          "score_distribution": {
            "1": 15,
            "2": 11,
            "3": 11,
            "4": 23
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 23,
          "incorrect_count": 37,
          "partial_credit_count": 37,
          "zero_count": 0,
          "mean_score_0_to_4": 2.7,
          "score_percent": 67.5,
          "score_distribution": {
            "1": 15,
            "2": 11,
            "3": 11,
            "4": 23
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 32,
        "incorrect_count": 18,
        "partial_credit_count": 14,
        "zero_count": 4,
        "mean_score_0_to_4": 3.06,
        "score_percent": 76.5,
        "score_distribution": {
          "0": 4,
          "1": 7,
          "2": 3,
          "3": 4,
          "4": 32
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 28,
        "incorrect_count": 22,
        "partial_credit_count": 18,
        "zero_count": 4,
        "mean_score_0_to_4": 3.0,
        "score_percent": 75.0,
        "score_distribution": {
          "0": 4,
          "1": 4,
          "2": 8,
          "3": 6,
          "4": 28
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 30,
        "incorrect_count": 20,
        "partial_credit_count": 16,
        "zero_count": 4,
        "mean_score_0_to_4": 3.0,
        "score_percent": 75.0,
        "score_distribution": {
          "0": 4,
          "1": 6,
          "2": 6,
          "3": 4,
          "4": 30
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 172641,
        "input_tokens": 272584,
        "output_tokens": 1833772,
        "total_tokens": 2106356
      },
      "known_totals": {
        "cached_input_tokens": 172641,
        "input_tokens": 272584,
        "output_tokens": 1833772,
        "total_tokens": 2106356
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 23,
          "incorrect_count": 7,
          "partial_credit_count": 3,
          "zero_count": 4,
          "mean_score_0_to_4": 3.2666666666666666,
          "score_percent": 81.66666666666667,
          "score_distribution": {
            "0": 4,
            "1": 1,
            "2": 1,
            "3": 1,
            "4": 23
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 22,
          "incorrect_count": 8,
          "partial_credit_count": 4,
          "zero_count": 4,
          "mean_score_0_to_4": 3.2333333333333334,
          "score_percent": 80.83333333333333,
          "score_distribution": {
            "0": 4,
            "2": 3,
            "3": 1,
            "4": 22
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 22,
          "incorrect_count": 8,
          "partial_credit_count": 4,
          "zero_count": 4,
          "mean_score_0_to_4": 3.2,
          "score_percent": 80.0,
          "score_distribution": {
            "0": 4,
            "1": 1,
            "2": 2,
            "3": 1,
            "4": 22
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 9,
          "incorrect_count": 11,
          "partial_credit_count": 11,
          "zero_count": 0,
          "mean_score_0_to_4": 2.75,
          "score_percent": 68.75,
          "score_distribution": {
            "1": 6,
            "2": 2,
            "3": 3,
            "4": 9
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 6,
          "incorrect_count": 14,
          "partial_credit_count": 14,
          "zero_count": 0,
          "mean_score_0_to_4": 2.65,
          "score_percent": 66.25,
          "score_distribution": {
            "1": 4,
            "2": 5,
            "3": 5,
            "4": 6
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 8,
          "incorrect_count": 12,
          "partial_credit_count": 12,
          "zero_count": 0,
          "mean_score_0_to_4": 2.7,
          "score_percent": 67.5,
          "score_distribution": {
            "1": 5,
            "2": 4,
            "3": 3,
            "4": 8
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Under the usual long-channel assumptions, its intrinsic gain \\(A_i=g_mr_o\\) roughly **doubles**. Doubling both dimensions keeps \\(W/L\\) unchanged, so \\(g_m\\) stays about the same at the same bias, while the longer channel roughly halves channel-length modulation and doubles \\(r_o\\). In short-channel devices, the increase may be less than 2×.",
        "format": "markdown",
        "sha256": "e117b607f3cfc3adce81c190dd0d8c492bd762fd162db673118c1d3e33d0daca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain roughly doubles: keeping W/L and overdrive unchanged leaves gm about constant, while the longer channel increases ro. The short-channel caveat is appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1439,
        "total_tokens": 1465,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1350,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1439,
        "total_tokens": 1465,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1350,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Approximately doubles** under the usual long-channel saturation model. Doubling both dimensions leaves \\(W/L\\) unchanged, so at the same bias \\(g_m\\) is roughly unchanged. But the longer channel reduces channel-length modulation, roughly halving \\(g_{ds}\\) and doubling \\(r_o\\). Since intrinsic gain is \\(g_m r_o\\), it roughly doubles.\n\nIn a real short-channel process, the exact increase depends on the device and bias conditions.",
        "format": "markdown",
        "sha256": "6f105793f4c4c59c873afe2a727fb525099316667dd6e02ae80e7dfa2ca91133"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: unchanged W/L keeps gm and drain current roughly constant, while the longer channel reduces channel-length modulation and approximately doubles ro. The short-channel caveat is appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2070,
        "total_tokens": 2096,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1968,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2070,
        "total_tokens": 2096,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1968,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For a long-channel MOSFET at the same operating point, its intrinsic gain \\(g_m/g_{ds}\\) is approximately **doubled**.\n\nDoubling both \\(W\\) and \\(L\\) leaves \\(W/L\\) unchanged, so \\(g_m\\) is roughly unchanged. But channel-length modulation decreases as \\(L\\) increases, so \\(g_{ds}\\) roughly halves and \\(r_o\\) doubles.\n\nThis is an approximation; short-channel effects and other output-conductance mechanisms can change the result.",
        "format": "markdown",
        "sha256": "ae52e2e439692a426ea566c90e27434adced4943a63fcfcda6ee76e39d194c84"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling both dimensions leaves W/L and gm approximately unchanged, while reduced channel-length modulation roughly doubles ro and intrinsic gain. Its long-channel and approximation caveats are appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 633,
        "total_tokens": 659,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 633,
        "total_tokens": 659,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the usual **strong-inversion saturation** model, **Student A is correct**. For a fixed MOSFET,\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}\\approx \\mu C_{\\text{ox}}\\frac WL V_{\\text{ov}},\n\\]\n\nso transconductance increases with overdrive voltage \\(V_{\\text{ov}}=V_{GS}-V_T\\).\n\nIt isn’t universal: in the triode region, \\(g_m\\) is approximately independent of overdrive for fixed \\(V_{DS}\\). And \\(g_m=2I_D/V_{\\text{ov}}\\) implies a decrease only when **drain current is held fixed**.",
        "format": "markdown",
        "sha256": "e9d693e5a45cf14487360ecbeedf4c84d0309cf30e20daeee79eed49b298c8d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A for a fixed device in saturation and explains that gm increases with overdrive. It also correctly notes that Student B’s conclusion applies when drain current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 772,
        "total_tokens": 810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 621,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 772,
        "total_tokens": 810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 621,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends on what is held constant. For the usual long-channel MOSFET in saturation, sweeping \\(V_{GS}\\) upward on the same device raises \\(V_{OV}=V_{GS}-V_T\\), and\n\\[\ng_m=\\beta V_{OV},\\qquad \\beta=\\mu C_{ox}\\frac WL.\n\\]\nSo **Student A** is correct in that case.\n\nStudent B’s result applies when comparing at **fixed drain current**, since \\(g_m=2I_D/V_{OV}\\); then a larger overdrive means lower \\(g_m\\). The operating region and comparison conditions matter.",
        "format": "markdown",
        "sha256": "b9e84bf5118eb6e7298fa90a1d0c1d6de5b71254869da8b60e5e27613605bd32"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A for a fixed device size and explains that gm increases with overdrive; it also correctly notes Student B’s result applies at fixed drain current.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1494,
        "total_tokens": 1532,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1494,
        "total_tokens": 1532,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the usual case—a fixed MOSFET in saturation, with overdrive increased by raising \\(V_{GS}\\)—**Student A is correct**. In the square-law model,\n\\[\ng_m=\\beta V_{OV},\\qquad \\beta=\\mu C_{\\text{ox}}\\frac WL,\n\\]\nso \\(g_m\\) increases with \\(V_{OV}\\).\n\nThere’s a condition that matters: if drain current \\(I_D\\) is held fixed, then \\(g_m=2I_D/V_{OV}\\), so increasing overdrive makes \\(g_m\\) decrease. Thus the answer depends on what is held constant.",
        "format": "markdown",
        "sha256": "2e7e17c02189bca78a75195d4abae6e102d41dd620eaffb266b6029437163d78"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that for a fixed MOSFET in saturation, gm increases with VOV, and distinguishes the fixed-ID case where gm decreases.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1336,
        "total_tokens": 1374,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1197,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 1336,
        "total_tokens": 1374,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1197,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The topology is the same, but the PMOS model is polarity-reversed and its parameter values may differ.**\n\nBoth models can include a \\(g_m\\)-controlled current source, output resistance \\(r_o\\), body-effect term, and parasitic capacitances. With positive current magnitudes, an NMOS is usually described using \\(V_{GS}\\) and drain-to-source current, while a PMOS uses \\(V_{SG}\\) and source-to-drain current. If you instead use signed terminal currents and voltages, the equations can be written in the same form—the signs are handled by the chosen references.\n\nThe values of \\(g_m\\), \\(r_o\\), and the capacitances depend on the device and its bias point, so they are not generally equal for a PMOS and an NMOS.",
        "format": "markdown",
        "sha256": "7d4bcb21351f9d1d2e3a894eb005e93612ee33c989380a4b3191b42fd40ab87a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model, with polarity/sign conventions reversed; the parameter values may differ.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 11069,
        "total_tokens": 11095,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 11069,
        "total_tokens": 11095,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The topology is essentially the same, but the polarity conventions are reversed.** In saturation, an NMOS model is commonly written with current referenced drain-to-source and controlled by \\(v_{gs}\\). A PMOS is naturally written with current referenced source-to-drain and controlled by \\(v_{sg}\\). With those choices, both have the same basic form: a transconductance-controlled current source, an output resistance \\(r_o\\), and—if included—body-effect and capacitance elements.\n\nIf you keep the same current and voltage reference directions for both devices, the signs may look different. Also, their parameter values (\\(g_m\\), \\(r_o\\), and so on) generally differ with device type, process, and bias point.",
        "format": "markdown",
        "sha256": "10bd622c85944615a7c0b4dd08083b6e8b24f5eeb516f28a19bf8c3470951b18"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same basic form as the NMOS model, with polarity and sign conventions reversed.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 7531,
        "total_tokens": 7557,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7371,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 7531,
        "total_tokens": 7557,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7371,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Structurally, yes; literally, not always.** Both models have a transconductance-controlled current source between drain and source, an output resistance \\(r_o\\), and—if included—body-effect and capacitance terms.\n\nUsing the usual positive-current conventions:\n\n\\[\n\\text{NMOS:}\\quad i_{DS}=g_m v_{GS}+g_{ds}v_{DS}\n\\]\n\n\\[\n\\text{PMOS:}\\quad i_{SD}=g_m v_{SG}+g_{ds}v_{SD}\n\\]\n\nHere the PMOS current and voltage references are reversed to match its normal operating polarity, so its model is essentially a mirrored NMOS model. The parameter values, such as \\(g_m\\) and \\(r_o=1/g_{ds}\\), depend on the device and its bias point and need not be equal.",
        "format": "markdown",
        "sha256": "95b440a05e2ab2d453d03a2b741dc2ae5ce84a83d7e78e2517c5172b03140862"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS model is structurally the same as the NMOS model when current and voltage references are chosen consistently, and notes the reversed polarity conventions. Device parameters need not be equal, which is also correct.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 6676,
        "total_tokens": 6702,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6491,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 6676,
        "total_tokens": 6702,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6491,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The gate and drain are tied to \\(V_X\\), while the source is grounded. Thus \\(V_{GS}=V_{DS}=V_X\\). For an ideal enhancement NMOS,\n\n\\[\nI_X \\approx\n\\begin{cases}\n0, & V_X\\le V_{TN},\\\\[2mm]\n\\dfrac{\\beta_n}{2}(V_X-V_{TN})^2, & V_X>V_{TN},\n\\end{cases}\n\\qquad\n\\beta_n=\\mu_n C_{\\mathrm{ox}}\\frac WL .\n\\]\n\nWhen on, the transistor is in saturation, so the curve rises quadratically from \\(V_{TN}\\):\n\n```text\n I_X\n  ^\n  |                         /\n  |                     _.-'\n  |                 _.-'\n  |             _.-'\n  |____________•________________> V_X\n              V_TN\n```\n\nThis is the ideal square-law sketch; real devices turn on gradually and may have small leakage below threshold.",
        "format": "markdown",
        "sha256": "1be1921b1b2589f86c7d69a1947ee75f07e953d8636970e44d6d782e5fe99c00"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives near-zero current below threshold and a quadratic rise above threshold, and notes saturation.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 4355,
        "total_tokens": 5561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 4355,
        "total_tokens": 5561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The MOSFET is diode-connected: its gate and drain are both at \\(V_X\\), while its source is grounded. Thus \\(V_{GS}=V_{DS}=V_X\\). For an enhancement nMOS, it is off below threshold and in saturation once it turns on:\n\n\\[\nI_X \\approx\n\\begin{cases}\n0, & V_X\\le V_{TN},\\\\[2mm]\n\\dfrac{1}{2}\\mu_n C_{\\mathrm{ox}}\\dfrac WL\\,(V_X-V_{TN})^2,\n& V_X>V_{TN}.\n\\end{cases}\n\\]\n\nSo the current rises quadratically from the threshold voltage:\n\n```text\n I_X\n  ↑\n  │                         ╱\n  │                     _╱\n  │                 __╱\n  │             __╱\n  │____________●________________→ V_X\n               V_TN\n```\n\nThis ideal sketch neglects subthreshold current and channel-length modulation.",
        "format": "markdown",
        "sha256": "a86ae72d47eceef94af9487962d7b09158f088347991f35692ee747d71ad9523"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives approximately zero current up to threshold followed by a quadratic rise above threshold, matching the full-credit rule.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 3735,
        "total_tokens": 4941,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 3735,
        "total_tokens": 4941,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "With \\(M_1\\) as an enhancement NMOS, its gate and drain are both at \\(V_X\\), while its source is grounded. Thus \\(V_{GS}=V_{DS}=V_X\\). When it is on, it is in saturation, so the ideal long-channel characteristic is\n\n\\[\nI_X(V_X)=\n\\begin{cases}\n0, & V_X\\le V_{TN},\\\\[2mm]\n\\dfrac{\\beta_n}{2}(V_X-V_{TN})^2, & V_X>V_{TN},\n\\end{cases}\n\\qquad\n\\left(\\beta_n=\\mu_n C_{\\rm ox}\\frac WL\\right).\n\\]\n\nSo the sketch is zero up to threshold, then rises quadratically:\n\n```text\n I_X\n  ↑\n  |                         /\n  |                    _.-´\n  |                _.-´\n  |_____________.-´____________→ V_X\n                V_TN\n```\n\nThis ideal sketch neglects subthreshold leakage and any intrinsic body-diode current.",
        "format": "markdown",
        "sha256": "24f6a22e7dcc202f9cdc6e2b7274df58de1ad8c8a9a7fa21faeed840e9db1dfd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives the zero-below-threshold and quadratic-above-threshold characteristic, and notes the ideal-model caveat. The negative-voltage body-diode detail is secondary.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 7995,
        "total_tokens": 9201,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 7995,
        "total_tokens": 9201,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the nMOS, \\(V_{GS}=V_X\\) and \\(V_{DS}=1\\,\\text{V}\\). The indicated arrow is in the direction of positive drain current. Let \\(V_T\\) be the threshold voltage. An ideal square-law sketch is:\n\n```text\n I_X\n  ↑\n  |                              /  triode (approximately linear)\n  |                         ____/\n  |                    ____/       knee at V_X = V_T + 1 V\n  |                ___/             saturation\n  |______________/\n  +--------------------------------→ V_X\n                 V_T\n       cutoff\n```\n\nMore precisely, neglecting subthreshold current and channel-length modulation, with\n\\(\\beta=\\mu_n C_{\\rm ox}(W/L)\\),\n\n\\[\nI_X \\approx\n\\begin{cases}\n0, & V_X\\le V_T,\\\\[2mm]\n\\dfrac{\\beta}{2}(V_X-V_T)^2, & V_T<V_X\\le V_T+1\\,\\text{V},\\\\[2mm]\n\\beta\\!\\left[(V_X-V_T)(1\\,\\text{V})-\\dfrac{(1\\,\\text{V})^2}{2}\\right],\n& V_X>V_T+1\\,\\text{V}.\n\\end{cases}\n\\]\n\nThe threshold and current scale depend on the transistor parameters, which aren’t specified.",
        "format": "markdown",
        "sha256": "7b0b1883ef0bca2917d4e1b88ef68ea9ec0a0d915616fd3dd6e7145ca7e9b360"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, quadratic saturation rise up to V_X = V_T + 1 V, and approximately linear triode-region rise beyond it.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 4743,
        "total_tokens": 6112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4440,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 4743,
        "total_tokens": 6112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4440,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "With the source grounded, \\(V_{GS}=V_X\\) and \\(V_{DS}=1\\,\\text{V}\\). For an enhancement NMOS with threshold \\(V_T\\), the ideal square-law sketch is:\n\n```text\n I_X\n  ↑\n  |                                  /  triode (approximately linear)\n  |                              ___/\n  |                         ____/\n  |                    ____/       saturation (parabolic)\n  |___________________/\n  +-------------------|-----------|----------------→ V_X\n                     V_T       V_T + 1 V\n```\n\nThus \\(I_X\\) is zero below threshold, rises quadratically from \\(V_T\\), and becomes approximately linear once \\(V_X-V_T\\) exceeds the fixed \\(V_{DS}=1\\,\\text{V}\\). It does **not** level off as \\(V_X\\) increases.\n\nFor the long-channel model, with \\(\\beta_n=\\mu_n C_{\\rm ox}W/L\\),\n\n\\[\nI_X \\approx\n\\begin{cases}\n0, & V_X\\le V_T,\\\\[2pt]\n\\dfrac{\\beta_n}{2}(V_X-V_T)^2,\n  & V_T<V_X<V_T+1\\,\\text{V},\\\\[4pt]\n\\beta_n\\!\\left[(V_X-V_T)(1\\,\\text{V})-\\dfrac{(1\\,\\text{V})^2}{2}\\right],\n  & V_X\\ge V_T+1\\,\\text{V}.\n\\end{cases}\n\\]\n\nThe current is positive in the direction of the arrow. The current scale and exact threshold depend on the transistor parameters.",
        "format": "markdown",
        "sha256": "b02feb4b91c97b81272f515f843074bd3e19764ab6e6a8ad2168c14e6b888764"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the saturation-to-triode transition at VX = VT + 1 V, with a quadratic rise followed by an approximately linear rise; the piecewise equations match the long-channel model.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 11201,
        "total_tokens": 12570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10844,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 11201,
        "total_tokens": 12570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10844,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M1 is an nMOS with \\(V_{GS}=V_X\\) and \\(V_{DS}=1\\,\\text{V}\\). The indicated \\(I_X\\) is positive drain current. In the ideal square-law model, the sketch is:\n\n```text\n I_X\n  ↑\n  │                                  /  approximately linear\n  │                             ____/\n  │                       _____/\n  │                 _____/       saturation: quadratic rise\n  │           _____/\n  │__________/________________________________→ V_X\n            V_T               V_T + 1 V\n```\n\nNeglecting subthreshold current and channel-length modulation, with\n\\(\\beta_n=\\mu_n C_{\\rm ox}(W/L)\\),\n\n\\[\nI_X \\approx\n\\begin{cases}\n0, & V_X\\le V_T,\\\\[2mm]\n\\dfrac{\\beta_n}{2}(V_X-V_T)^2,\n  & V_T<V_X<V_T+1\\,\\text{V},\\\\[2mm]\n\\beta_n\\!\\left[(V_X-V_T)(1\\,\\text{V})-\\dfrac{(1\\,\\text{V})^2}{2}\\right],\n  & V_X\\ge V_T+1\\,\\text{V}.\n\\end{cases}\n\\]\n\nThe figure gives no threshold or device-size parameters, so the current scale cannot be specified.",
        "format": "markdown",
        "sha256": "53e3cec8860584d342a5cf02bb4899b05a7408960e670421416229791da7ec02"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the zero-current, saturation-quadratic, and triode roughly linear regions, with the transition at V_X = V_T + 1 V and matching ideal square-law expressions.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 13053,
        "total_tokens": 14422,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12758,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 13053,
        "total_tokens": 14422,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12758,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The solid channel in the symbol denotes a depletion-mode nMOSFET, which is on at \\(V_{GS}=0\\). With the top terminal sufficiently positive, it enters saturation and its current is approximately constant over a range of drain voltages. It can therefore sink a nearly constant \\(I_x\\) to ground, provided the required current and voltage are within its limits. An enhancement-mode MOSFET at the same bias would be off.",
        "format": "markdown",
        "sha256": "55b422988f9c30d48f2f187ff70aae962aaaffbe63927b42cf19816ee29c7bbe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The device is a diode-connected PMOS, not a depletion-mode NMOS; its low impedance (about 1/gm) means it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 12229,
        "total_tokens": 12729,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12130,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 12229,
        "total_tokens": 12729,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12130,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The solid channel denotes a depletion-mode n-channel MOSFET, which conducts even when \\(V_{GS}=0\\). With the gate and lower terminal grounded, it can sink an approximately constant current from the upper terminal once \\(V_{DS}\\) is high enough for saturation.\n\nIt is not an ideal source: it needs sufficient voltage headroom, and its current varies somewhat with \\(V_{DS}\\). An enhancement-mode MOSFET with the same connections would be off.",
        "format": "markdown",
        "sha256": "e4b9a626deeb7c3c498804cfd3497d031d10afac4e94be597ce57ae1480d4ed0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the diode-connected PMOS as a depletion-mode NMOS and concludes it can act as a current source. As drawn, it presents low impedance (about 1/gm), so it cannot.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 23413,
        "total_tokens": 23913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 23413,
        "total_tokens": 23913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—assuming the solid channel denotes a depletion-mode nMOS, as it normally does. With gate and source grounded, \\(V_{GS}=0\\), but the device still conducts. Once \\(V_{DS}\\) is high enough for saturation, its drain current is approximately constant, so it acts as a current sink from the top terminal to ground. It is not ideal, and an enhancement-mode MOSFET would be off at \\(V_{GS}=0\\).",
        "format": "markdown",
        "sha256": "0dbbdb1c1232f8eb2940efe777fc2ece2cb79c186d0e34739c98240678923950"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads M1 as a depletion-mode NMOS and concludes it can act as a current source. In the figure, M1 is a diode-connected PMOS with gate and drain grounded; it presents a low impedance of about 1/gm, so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 9424,
        "total_tokens": 9924,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 9424,
        "total_tokens": 9924,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is the p-channel MOSFET shown, its upper terminal is the source and its lower terminal is the drain. The circuit is a **resistively loaded common-source stage with source degeneration**; it can operate as an inverting amplifier or as an inverter.\n\nLet \\(I\\) be the DC current flowing from \\(V_{DD}\\) through \\(R_S\\), \\(M_1\\), and \\(R_D\\) to ground. Then\n\\[\nV_S=V_{DD}-IR_S,\\qquad V_{\\text{out}}=V_D=IR_D,\n\\]\nso\n\\[\nV_{SG}=V_{DD}-IR_S-V_{\\text{in}},\\qquad\nV_{SD}=V_{DD}-I(R_S+R_D).\n\\]\n\nFor a pMOS in saturation,\n\\[\nV_{SG}>|V_{TP}|,\\qquad V_{SD}\\ge V_{SG}-|V_{TP}|,\n\\]\nand, neglecting channel-length modulation,\n\\[\nI=\\frac{k_p}{2}\\left(V_{DD}-IR_S-V_{\\text{in}}-|V_{TP}|\\right)^2,\n\\]\nwhere \\(k_p=\\mu_p C_{\\text{ox}}(W/L)\\). This is an implicit bias equation because the source voltage changes with current. The saturation condition can also be written \\(V_{\\text{out}}\\le V_{\\text{in}}+|V_{TP}|\\). If that condition fails while the transistor is on, it is in the triode region.\n\nWhen \\(V_{\\text{in}}\\gtrsim V_{DD}-|V_{TP}|\\), the transistor is off: \\(I\\approx0\\) and \\(V_{\\text{out}}\\approx0\\), due to \\(R_D\\). Lowering \\(V_{\\text{in}}\\) turns the pMOS on, increasing \\(I\\) and \\(V_{\\text{out}}\\). With strong conduction, the output is limited approximately by the resistor divider:\n\\[\nV_{\\text{out}}\\approx V_{DD}\\frac{R_D}{R_S+R_D}.\n\\]\nThus the stage is **inverting**. \\(R_S\\) provides negative feedback: a rise in current lowers \\(V_S\\), reducing \\(V_{SG}\\) and opposing the current increase.\n\nFor small signals about a saturation bias point, with \\(V_{DD}\\) treated as AC ground,\n\\[\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n\\approx-\\frac{g_mR_D}{1+g_mR_S},\n\\]\nneglecting transistor output resistance and body effect. Here \\(g_m\\approx k_p(V_{SG}-|V_{TP}|)\\). The gate draws essentially no DC current, so the input resistance is very high.\n\nA numerical operating point or gain requires the supply, resistor values, transistor parameters, and input bias voltage.",
        "format": "markdown",
        "sha256": "78fe65814c9575923d7cafa9d738174d667de07003a2bca653f1de4092d252a5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting small-signal gain \u0002\u0002\u0002\u0002\u0002\u0002\u0002\u0002\u0002\u0002",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 12172,
        "total_tokens": 13598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 12172,
        "total_tokens": 13598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The symbol and resistor connections indicate a **p-channel MOSFET**: its source is the upper terminal, and its drain is the output. This is a **common-source amplifier with an unbypassed source resistor**.\n\n### DC operating point\n\nAssuming the output is unloaded, let \\(I\\) be the current flowing from \\(V_{DD}\\) through \\(R_S\\), M1, and \\(R_D\\) to ground. Then\n\n\\[\nV_S=V_{DD}-IR_S,\\qquad V_{out}=V_D=IR_D,\n\\]\n\\[\nV_{SG}=V_S-V_{in},\\qquad V_{SD}=V_S-V_{out}.\n\\]\n\nThe pMOS is off when \\(V_{SG}\\le |V_{TP}|\\); then \\(I\\approx0\\) and \\(V_{out}\\approx0\\). If it is on and in saturation, the long-channel square-law model gives\n\n\\[\nI \\approx \\frac{\\beta_p}{2}\\bigl(V_{SG}-|V_{TP}|\\bigr)^2\n=\\frac{\\beta_p}{2}\\bigl(V_{DD}-IR_S-V_{in}-|V_{TP}|\\bigr)^2,\n\\]\n\nwhere \\(\\beta_p=\\mu_p C_{ox}(W/L)\\). This applies when \\(V_{SD}\\ge V_{SG}-|V_{TP}|\\). The equation is implicit because \\(R_S\\) makes the source voltage depend on the current.\n\n### Signal behavior\n\nLowering \\(V_{in}\\) increases the pMOS current and raises \\(V_{out}\\); raising \\(V_{in}\\) reduces the current and lowers \\(V_{out}\\). Thus the stage is **inverting**. \\(R_S\\) provides source degeneration: it stabilizes the bias and reduces the gain.\n\nFor a small signal about a saturation-region bias point, with \\(V_{DD}\\) treated as AC ground and \\(r_o\\) large,\n\n\\[\n\\boxed{\\displaystyle A_v=\\frac{v_{out}}{v_{in}}\\approx\n-\\frac{g_mR_D}{1+g_mR_S}}\n\\]\n\nwhere \\(g_m\\) is the pMOS transconductance magnitude at the bias point. The figure gives no device parameters or bias values, so a numerical operating point or gain cannot be determined.",
        "format": "markdown",
        "sha256": "0c5f2256e2deb84b1d103ff22b7a3c9da9664923aec736d4cd09fa894ef31950"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting small-signal gain −gmRD/(1 + gmRS).",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 17576,
        "total_tokens": 19002,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 17576,
        "total_tokens": 19002,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is the p-channel MOSFET shown, its upper terminal is the source and its lower terminal is the drain. This is a **common-source amplifier with an unbypassed source resistor** \\(R_S\\) and drain load \\(R_D\\). The gate draws essentially no DC current.\n\n### DC operating point\n\nLet \\(I_D\\) be the current flowing from \\(V_{DD}\\) through \\(R_S\\), \\(M_1\\), and \\(R_D\\). Then\n\n\\[\nV_S=V_{DD}-I_D R_S,\\qquad V_{\\text{out}}=I_D R_D,\n\\]\n\n\\[\nV_{SG}=V_S-V_{\\text{in}},\\qquad V_{SD}=V_S-V_{\\text{out}}.\n\\]\n\nFor a pMOS, define \\(V_{OV}=V_{SG}-|V_{TP}|\\).\n\n- **Cutoff:** \\(V_{SG}\\le |V_{TP}|\\). Then \\(I_D\\approx0\\), so \\(V_S\\approx V_{DD}\\) and \\(V_{\\text{out}}\\approx0\\). At cutoff, this corresponds to \\(V_{\\text{in}}\\gtrsim V_{DD}-|V_{TP}|\\).\n- **Saturation:** \\(V_{OV}>0\\) and \\(V_{SD}\\ge V_{OV}\\). With the long-channel square-law model,\n  \\[\n  I_D\\approx \\frac{\\beta_p}{2}V_{OV}^2\n  =\\frac{\\beta_p}{2}\\bigl(V_{DD}-I_D R_S-V_{\\text{in}}-|V_{TP}|\\bigr)^2,\n  \\]\n  and \\(V_{\\text{out}}=I_D R_D\\). The saturation condition can also be written \\(V_{\\text{out}}\\le V_{\\text{in}}+|V_{TP}|\\).\n- **Triode:** The device is on, but \\(V_{SD}<V_{OV}\\); the saturation-current equation no longer applies.\n\nThus a numerical bias point requires \\(V_{DD}, R_S, R_D, V_{\\text{in}}\\), and the MOSFET parameters. When strongly on, the output approaches \\(V_{DD}R_D/(R_S+R_D)\\), rather than \\(V_{DD}\\).\n\n### Small-signal behavior\n\nIf the device is biased in saturation and \\(r_o\\) is large, the voltage gain is approximately\n\n\\[\n\\boxed{\\displaystyle A_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n\\approx-\\frac{g_mR_D}{1+g_mR_S}}\n\\]\n\nwhere \\(g_m=\\beta_pV_{OV}\\) in the square-law model. The gain is **inverting**: increasing \\(V_{\\text{in}}\\) reduces \\(V_{SG}\\), hence \\(I_D\\) and \\(V_{\\text{out}}\\). \\(R_S\\) provides source degeneration, reducing the gain and stabilizing the bias.\n\nIncluding finite \\(r_o\\), and neglecting body effect,\n\n\\[\nA_v\\approx-\\frac{g_mR_D}{1+g_mR_S+(R_S+R_D)/r_o}.\n\\]\n\nThese gain expressions apply only around a saturation-region bias point; the figure alone does not specify enough information for a numerical result.",
        "format": "markdown",
        "sha256": "e3a7da9d7cf9c6114d611907d9e61e49c8fa30ac0e6ce547d3e44c7e9ab95635"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain -g_mR_D/(1+g_mR_S). Additional bias and finite-r_o discussion does not undermine the essential answer.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 16596,
        "total_tokens": 18022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15871,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 16596,
        "total_tokens": 18022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15871,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M1 is an nMOS with its drain connected to \\(V_{DD}\\), its gate driven by \\(V_{in}\\), and its source at \\(V_{out}\\). This is a **common-drain (source-follower) stage**.\n\n### DC operation\nThe resistor current equals the transistor current:\n\\[\nI_D=\\frac{V_{out}}{R_S},\\qquad\nV_{GS}=V_{in}-V_{out},\\qquad\nV_{DS}=V_{DD}-V_{out}.\n\\]\n\nAssuming saturation, ignoring body effect and channel-length modulation, and writing \\(\\beta_n=\\mu_n C_{ox}(W/L)\\),\n\\[\n\\frac{V_{out}}{R_S}\n=\\frac{\\beta_n}{2}\\bigl(V_{in}-V_{out}-V_T\\bigr)^2.\n\\]\nThus \\(V_{out}\\) rises with \\(V_{in}\\), but sits below it by the required \\(V_{GS}\\). Below threshold, M1 is off and \\(R_S\\) pulls \\(V_{out}\\) close to ground. Saturation requires \\(V_{DS}\\ge V_{GS}-V_T\\); otherwise the transistor enters the triode region.\n\n### Small-signal behavior\nWith M1 biased on, the stage is non-inverting. Ignoring body effect and taking \\(r_o\\) as large,\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx \\frac{g_mR_S}{1+g_mR_S}<1.\n\\]\nFor \\(g_mR_S\\gg1\\), the gain approaches unity. The gate draws essentially no DC current, so the input resistance is high; the output resistance is relatively low, approximately \\(R_S\\parallel 1/g_m\\) in the simple model.\n\nSo this circuit acts mainly as a **voltage buffer**: the output follows the input, with a voltage drop of roughly \\(V_{GS}\\), rather than providing voltage gain.",
        "format": "markdown",
        "sha256": "71988a0099429290c60ec55474861cde4759566ccf2245f9acefc90775e1ea53"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain expression. The additional DC and output-resistance analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 7069,
        "total_tokens": 8218,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6641,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 7069,
        "total_tokens": 8218,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6641,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an n-channel MOSFET, this is a **source follower** (common-drain stage): the drain is tied to \\(V_{DD}\\), and the output is taken from the source.\n\nThe gate draws essentially no DC current. When the MOSFET is on, current flows from \\(V_{DD}\\) through \\(M_1\\) and \\(R_S\\), so, with no other load,\n\n\\[\nI_D=\\frac{V_{\\text{out}}}{R_S},\\qquad\nV_{GS}=V_{\\text{in}}-V_{\\text{out}}.\n\\]\n\nIn saturation, using the square-law model and neglecting body effect and channel-length modulation,\n\n\\[\n\\frac{V_{\\text{out}}}{R_S}\n=\\frac{\\beta_n}{2}\n\\left(V_{\\text{in}}-V_{\\text{out}}-V_T\\right)^2.\n\\]\n\nThis equation determines the DC output. If \\(V_{\\text{in}}\\) is below threshold, \\(M_1\\) is off and \\(R_S\\) pulls \\(V_{\\text{out}}\\) approximately to ground. When it conducts, \\(V_{\\text{out}}\\) rises and follows \\(V_{\\text{in}}\\), but is lower by \\(V_{GS}\\). That drop is **not generally just \\(V_T\\)**; it depends on the current and thus on \\(R_S\\) and the MOSFET parameters.\n\nFor saturation, the usual condition is\n\n\\[\nV_{DS}\\ge V_{GS}-V_T,\n\\]\n\nwhich here becomes \\(V_{DD}\\ge V_{\\text{in}}-V_T\\) in the constant-\\(V_T\\) model.\n\nFor small signals, the stage is non-inverting and has gain below unity. Neglecting body effect and output conductance,\n\n\\[\nA_v \\approx \\frac{g_mR_S}{1+g_mR_S}.\n\\]\n\nThus it can act as a buffer: high input impedance and relatively low output impedance, with voltage gain approaching—but not exceeding—one. A numerical operating point requires \\(R_S\\), \\(V_{DD}\\), and the MOSFET’s threshold and transconductance parameters.",
        "format": "markdown",
        "sha256": "f2ca2ae49c77c134cb1845b055b31b5227696bef4733beca87051f7ada224873"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, \\(g_mR_S/(1+g_mR_S)\\). The additional DC and saturation analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 10411,
        "total_tokens": 11560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 10411,
        "total_tokens": 11560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an enhancement nMOS, this is a **common-drain stage**, also called a **source follower**. The drain is at \\(V_{DD}\\), the gate is driven by \\(V_{in}\\), and the source is the output.\n\n### DC operation\n\nThe MOS gate draws essentially no DC current, and the resistor current equals the drain current:\n\n\\[\nV_{GS}=V_{in}-V_{out},\\qquad\nV_{DS}=V_{DD}-V_{out},\\qquad\nI_D=\\frac{V_{out}}{R_S}.\n\\]\n\nIf \\(V_{in}\\) is below threshold, \\(M_1\\) is off and \\(V_{out}\\approx 0\\). When it is on and in saturation, using the long-channel square-law model,\n\n\\[\n\\frac{V_{out}}{R_S}\n=\\frac{\\beta_n}{2}\\left(V_{in}-V_{out}-V_{TN}\\right)^2,\n\\]\n\nwhere \\(\\beta_n=\\mu_n C_{ox}(W/L)\\). Saturation requires \\(V_{DD}\\ge V_{in}-V_{TN}\\). For \\(A=V_{in}-V_{TN}>0\\), the model gives\n\n\\[\nV_{out}\n=A-\\frac{\\sqrt{1+2\\beta_n R_S A}-1}{\\beta_n R_S}.\n\\]\n\nThus the output rises with the input, but is below it: \\(V_{out}=V_{in}-V_{GS}\\), with \\(V_{GS}>V_{TN}\\). The resistor current and transistor strength determine the precise offset. If \\(V_{in}>V_{DD}+V_{TN}\\), the transistor is in the triode region instead, so the saturation expression does not apply.\n\n### Small-signal behavior\n\nAround a bias point, the voltage gain is approximately\n\n\\[\n\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m}{g_m+g_{mb}+g_{ds}+1/R_S}.\n\\]\n\nIgnoring body effect and channel-length modulation,\n\n\\[\n\\frac{v_{out}}{v_{in}}\n\\approx \\frac{g_mR_S}{1+g_mR_S}<1.\n\\]\n\nSo this is a **non-inverting buffer** with high input resistance and relatively low output resistance; it provides current gain, but not voltage gain greater than one. A numerical operating point would require \\(V_{TN}\\), \\(\\beta_n\\), \\(R_S\\), and \\(V_{DD}\\).",
        "format": "markdown",
        "sha256": "a12193dce3340fed6e52f4f8faada828ea80b98dcd39fff0e2064110b4835075"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including appropriate refinements for body effect and output conductance. The additional DC analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 9834,
        "total_tokens": 10983,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9284,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 9834,
        "total_tokens": 10983,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9284,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an nMOS, this is a **common-gate amplifier**: the input is applied at the source, the output is taken from the drain, and the gate is fixed at \\(V_{DD}\\). For small-signal analysis, an ideal \\(V_{DD}\\) is AC ground.\n\nLet \\(V_{in,Q}\\) be the DC input bias. Then\n\\[\nV_{GS,Q}=V_{DD}-V_{in,Q},\\qquad\nI_D=\\frac{V_{DD}-V_{out,Q}}{R_D}.\n\\]\nThe transistor is on when \\(V_{DD}-V_{in,Q}>V_T\\). If it is in saturation, and body effect and channel-length modulation are neglected,\n\\[\nI_D \\simeq \\frac{\\beta_n}{2}(V_{DD}-V_{in,Q}-V_T)^2,\n\\qquad\nV_{out,Q}=V_{DD}-R_DI_D.\n\\]\nSaturation additionally requires \\(V_{out,Q}\\ge V_{DD}-V_T\\). If \\(M_1\\) is off, \\(V_{out}\\) is approximately \\(V_{DD}\\); if the saturation condition fails, use the triode-region current equation instead. A numerical operating point needs the device parameters and bias values.\n\nFor a small input change, \\(v_g=0\\), so \\(v_{gs}=-v_{in}\\). Raising the source voltage reduces \\(I_D\\), which reduces the drop across \\(R_D\\) and raises \\(V_{out}\\). Thus the stage is **non-inverting**:\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\\simeq +g_mR_D\n\\]\nin the simple model. With finite transistor output resistance and an output load, the gain is roughly \\(+g_m(R_D\\parallel r_o\\parallel R_L)\\). The source input resistance is low, approximately \\(1/g_m\\).",
        "format": "markdown",
        "sha256": "46c6485314c5aa33e61a95fb31ce4cd5239726f06686a571190fc4000daaf535"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology, AC-grounded gate, non-inverting gain, and low input resistance. The additional bias analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 12543,
        "total_tokens": 13659,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12119,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 12543,
        "total_tokens": 13659,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12119,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an nMOS, this is a **common-gate amplifier**: the gate is held at \\(V_{DD}\\), the input is applied to the source, and the output is taken from the drain. An ideal \\(V_{DD}\\) supply is also an AC ground.\n\nWith no load on the output,\n\\[\nV_{GS}=V_{DD}-V_{in},\\qquad\nV_{DS}=V_{out}-V_{in},\\qquad\nI_D=\\frac{V_{DD}-V_{out}}{R_D}.\n\\]\nThe transistor is off when \\(V_{in}\\gtrsim V_{DD}-V_T\\), in which case \\(V_{out}\\approx V_{DD}\\). When it conducts, the operating point follows the MOSFET’s I–V curve. For example, in saturation with the long-channel square-law model,\n\\[\nI_D\\approx \\frac{\\beta_n}{2}(V_{DD}-V_{in}-V_T)^2,\n\\qquad\nV_{out}\\approx V_{DD}-R_DI_D.\n\\]\nThis saturation expression applies only if \\(V_{DS}\\ge V_{GS}-V_T\\); otherwise the transistor is in the triode region.\n\nFor small signals, the gate is fixed, so \\(v_{gs}=-v_{in}\\). Raising \\(V_{in}\\) reduces the drain current, reducing the voltage drop across \\(R_D\\), and therefore **raises \\(V_{out}\\)**. The stage is non-inverting, with approximate gain\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx +g_m(R_D\\parallel r_o\\parallel R_L),\n\\]\nor \\(+g_mR_D\\) when the output is unloaded and \\(r_o\\) is large. Its source-side input resistance is roughly \\(1/g_m\\). A numerical output requires the device parameters and the input’s DC bias.",
        "format": "markdown",
        "sha256": "98310fdc06dca119cf9b0d8c3212106e57201dd13c014a4bddce38bc1718bdef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology and source input, and gives the right non-inverting gain and approximate input resistance. The additional DC analysis is consistent with the stated nMOS assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 14925,
        "total_tokens": 16041,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 14925,
        "total_tokens": 16041,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an enhancement NMOS and \\(V_{DD}\\) is an ideal supply, this is a **common-gate stage**: the input is applied at the source, the output is taken at the drain, and the gate is held at \\(V_{DD}\\) (an AC ground).\n\n### DC behavior\n\n\\[\nV_{GS}=V_{DD}-V_{in}, \\qquad I_D=\\frac{V_{DD}-V_{out}}{R_D}.\n\\]\n\nIf \\(V_{in}\\ge V_{DD}-V_T\\), the transistor is off, so \\(I_D\\approx0\\) and \\(V_{out}\\approx V_{DD}\\).\n\nWhen it is on and in saturation, ignoring channel-length modulation and body effect,\n\n\\[\nI_D\\approx \\frac{\\beta_n}{2}(V_{DD}-V_{in}-V_T)^2,\n\\qquad\nV_{out}\\approx V_{DD}-R_DI_D.\n\\]\n\nSaturation requires \\(V_{out}\\ge V_{DD}-V_T\\). If that condition fails, the transistor is in the triode region and the saturation expression no longer applies.\n\n### Small-signal behavior\n\nA positive change in \\(V_{in}\\) reduces \\(V_{GS}\\), so the drain current falls. The voltage drop across \\(R_D\\) then decreases, causing \\(V_{out}\\) to rise. Thus the stage is **non-inverting**.\n\nWith \\(r_o\\) large,\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\\approx +g_mR_D.\n\\]\n\nIncluding finite \\(r_o\\) (and ignoring body effect),\n\n\\[\nA_v=\\frac{g_m+1/r_o}{1/R_D+1/r_o}\n\\approx g_m(R_D\\parallel r_o).\n\\]\n\nThe source input resistance is approximately \\(1/g_m\\). Numerical values require the bias point and device parameters, which aren’t specified in the figure.",
        "format": "markdown",
        "sha256": "002e9044294e6dbd3f8995ebfbb96652ae7424e6286b898af690efbbd72397cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology, its non-inverting gain, and approximately 1/gm input resistance. The added DC-region analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 17428,
        "total_tokens": 18544,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 17428,
        "total_tokens": 18544,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit resembles a **common-gate NMOS amplifier**, but the lower transistor terminal and the \\(C_1\\) junction are both wired directly to ground. Thus, **as drawn, the input is shunted to ground rather than applied to the transistor**.\n\nAt DC, \\(C_1\\) is open, \\(V_S=0\\), and \\(V_{GS}=V_b\\). The output bias is\n\\[\nV_{\\text{out},Q}=V_{DD}-I_D R_D.\n\\]\nFor an NMOS in saturation, neglecting channel-length modulation,\n\\[\nI_D \\approx \\tfrac12\\beta_n(V_b-V_{TN})^2,\n\\]\nprovided \\(V_b>V_{TN}\\) and \\(V_{\\text{out},Q}\\ge V_b-V_{TN}\\). If the transistor is off, \\(V_{\\text{out},Q}\\approx V_{DD}\\).\n\nFor AC signals, the grounded source node stays at zero, so \\(v_{gs}=0\\) and there is no small-signal drain-current change. Ideally,\n\\[\n\\frac{v_{\\text{out}}}{v_{\\text{in}}}=0.\n\\]\nThe input signal simply drives \\(C_1\\) to ground.\n\nIf the ground connection is an error and the source is instead properly biased without being AC-shorted, the intended common-gate stage has a **non-inverting** midband gain of approximately\n\\[\nA_v \\approx +g_m(R_D\\parallel r_o\\parallel R_L),\n\\]\nor \\(+g_mR_D\\) in the simplest unloaded model. Its input resistance is roughly \\(1/g_m\\).",
        "format": "markdown",
        "sha256": "44a4f25f407d177a72588e6ba2b383b21c3a3cf25acd9cb8414eaee2b071f1ba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices the source/input node is hard-shorted to ground and concludes the ideal small-signal gain from Vin is zero. The additional bias and hypothetical common-gate discussion does not undermine the essential answer.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 12789,
        "total_tokens": 14526,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 12789,
        "total_tokens": 14526,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The source node is **directly grounded** in the drawing, so this is not a functioning common-gate amplifier as shown: \\(C_1\\) connects \\(V_{in}\\) to ground rather than to a movable transistor source node.\n\nAt DC, \\(C_1\\) is open, so \\(V_S=0\\) and \\(V_{GS}=V_b\\). If \\(M_1\\) is on and in saturation,\n\n\\[\nI_D \\simeq \\frac{\\beta_n}{2}(V_b-V_T)^2,\n\\qquad\nV_{out,Q}=V_{DD}-I_D R_D,\n\\]\n\nwith saturation requiring \\(V_{out,Q}\\ge V_b-V_T\\). If \\(V_b\\le V_T\\), the transistor is off and \\(V_{out}\\approx V_{DD}\\).\n\nFor small-signal operation, assuming \\(V_b\\) and \\(V_{DD}\\) are AC grounds, both the gate and source are fixed at AC ground. Thus \\(v_{gs}=0\\), so \\(V_{in}\\) produces no small-signal drain current or output voltage in the ideal circuit. \\(C_1\\) simply provides a capacitive path from the input source to ground.\n\nIf the source-to-ground short is a drawing error, the likely intended circuit is a **common-gate amplifier**. The source would need a DC bias path—typically a current sink—with high impedance at signal frequencies. Its midband gain would then be approximately\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\\simeq +g_m(R_D\\parallel r_o),\n\\]\n\nso the output is non-inverting, with source input resistance roughly \\(1/g_m\\).",
        "format": "markdown",
        "sha256": "b02f179e2e9558a4d64838c33999a684a7f717d5ed889c35eb04cc937462d38a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-to-ground short and concludes that the input is shorted, giving ideally zero small-signal gain. The additional DC and hypothetical common-gate discussion does not undermine the essential answer.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 9320,
        "total_tokens": 11057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8949,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 9320,
        "total_tokens": 11057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8949,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit resembles a common-gate NMOS amplifier, but **as drawn the source of \\(M_1\\) is wired directly to ground**. Thus \\(C_1\\) connects \\(V_{\\text{in}}\\) to ground; it does not create a signal voltage at the transistor’s source.\n\nAssuming \\(M_1\\) is an NMOS:\n\n- **DC:** \\(C_1\\) is open, so \\(V_{GS}=V_b\\) and\n  \\[\n  I_D=\\frac{V_{DD}-V_{\\text{out}}}{R_D}.\n  \\]\n  If \\(V_b\\le V_T\\), the transistor is off and \\(V_{\\text{out}}\\approx V_{DD}\\). If it is on and in saturation,\n  \\[\n  I_D\\approx \\frac{\\beta}{2}(V_b-V_T)^2,\\qquad\n  V_{\\text{out}}\\approx V_{DD}-R_DI_D,\n  \\]\n  provided \\(V_{\\text{out}}\\ge V_b-V_T\\). Otherwise the operating point is in the triode region and must be found from the load line.\n\n- **Small signal:** With ideal grounds and a fixed \\(V_b\\), the source and gate have no AC signal, so \\(v_{gs}=0\\). Hence the input causes no drain-current variation and\n  \\[\n  \\frac{v_{\\text{out}}}{v_{\\text{in}}}=0\n  \\]\n  in the ideal circuit. \\(C_1\\) simply carries input current to ground.\n\nFor the **intended common-gate amplifier**, the source-to-ground wire should instead be a DC bias path with high AC impedance (for example, a current sink). Then, approximately,\n\\[\nA_v\\approx +g_m(R_D\\parallel r_o\\parallel R_L),\\qquad\nR_{\\text{in}}\\approx \\frac{1}{g_m},\n\\]\nso the output is non-inverting. \\(C_1\\) then provides AC coupling.",
        "format": "markdown",
        "sha256": "de5862a907f0c91f054e8dbb8ae8b26dead5b0d19d8f8be656a4f8afda752c7a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies the source-to-ground short and concludes that the ideal input-to-output voltage gain is zero. The additional DC and intended-topology discussion does not undermine that conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 11312,
        "total_tokens": 13049,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 11312,
        "total_tokens": 13049,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**. The gate and drain are the two dynamic nodes; \\(C_{GS}\\), \\(C_{GD}\\), and \\(C_{DB}\\) provide capacitance at or between them. \\(C_{SB}\\) does not add a pole because the source is grounded.",
        "format": "markdown",
        "sha256": "2d25b8e2c9d8d8652040159e0cf0e7b3dc7b43953f966bcdedc6135b5cc53658"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives two poles and accounts for the grounded-source capacitor having no effect; the remaining capacitors are associated with the gate and drain dynamics.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 584,
        "total_tokens": 2556,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 584,
        "total_tokens": 2556,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Two poles.** With \\(V_{DD}\\) treated as AC ground, the gate and drain/output are the only non-ground dynamic nodes. \\(C_{SB}\\) adds no independent state because the source is grounded.",
        "format": "markdown",
        "sha256": "77cbb2bba3a1e47e66c0e6ff78778229f07260b6ff5b3dbf0edbe574665cb84d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles: the gate and drain are the dynamic nodes, and the grounded-source topology leaves C_SB with no independent state.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 3662,
        "total_tokens": 5634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 3662,
        "total_tokens": 5634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**. The gate and drain are the two non-ground dynamic nodes; the source and \\(V_{DD}\\) are AC-grounded. Thus \\(C_{SB}\\) is across ground and adds no independent state.",
        "format": "markdown",
        "sha256": "3a637a3a24b58bf7823378388bc3e51c24634344da695662fbc77d94f21bc5e6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives two poles and justifies the count by identifying the grounded source as shorting out CSB, with gate and drain as the two dynamic nodes.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 2643,
        "total_tokens": 4615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2587,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 2643,
        "total_tokens": 4615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2587,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an nMOS biased in saturation. With no component values or MOSFET parameters given, the operating point and gain can only be stated symbolically.\n\n### Bias and feedback\n\nSince the MOSFET gate draws negligible current, the resistor divider sets\n\n\\[\n\\beta=\\frac{R_2}{R_1+R_2},\\qquad V_F=\\beta V_{\\text{out}},\n\\]\n\nso \\(V_{GS}=\\beta V_{\\text{out}}-V_{\\text{in}}\\). At DC, the output-node current balance is\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n= I_D+\\frac{V_{\\text{out}}}{R_1+R_2}.\n\\]\n\nThese relations, together with the MOSFET’s \\(I_D\\)-voltage law, determine the bias point.\n\n### Small-signal voltage gain\n\nFor small signals, \\(V_{DD}\\) is AC ground. The divider both feeds back a fraction \\(\\beta\\) of the output and loads the output with \\(R_1+R_2\\). With no external load, define\n\n\\[\nR_{\\text{eq}}=R_D\\parallel(R_1+R_2).\n\\]\n\nIgnoring transistor output resistance and body effect, the drain-current change is \\(i_d=g_m(v_f-v_i)\\). Output-node KCL gives\n\n\\[\n\\frac{v_o}{R_{\\text{eq}}}+g_m(\\beta v_o-v_i)=0,\n\\]\n\nand hence\n\n\\[\n\\boxed{\\frac{v_o}{v_i}\n=\\frac{g_mR_{\\text{eq}}}{1+\\beta g_mR_{\\text{eq}}}}.\n\\]\n\nThe gain is **positive**: increasing \\(v_i\\) initially reduces \\(V_{GS}\\) and drain current, causing \\(v_o\\) to rise. That rise increases \\(v_f\\), which raises the drain current and pulls \\(v_o\\) back down—so the feedback is negative.\n\nFor large loop gain, \\(\\beta g_mR_{\\text{eq}}\\gg1\\),\n\n\\[\n\\frac{v_o}{v_i}\\approx\\frac{1}{\\beta}\n=\\frac{R_1+R_2}{R_2}\n=1+\\frac{R_1}{R_2}.\n\\]\n\nThis resistor-ratio limit assumes body effect is negligible. If \\(R_1+R_2\\gg R_D\\), then \\(R_{\\text{eq}}\\approx R_D\\); an external output load should also be included in parallel.\n\nIn this simplified model, the feedback increases the source input resistance and decreases the output resistance: \\(R_{\\text{in}}\\approx(1+T)/g_m\\) and \\(R_{\\text{out}}\\approx R_{\\text{eq}}/(1+T)\\), where \\(T=\\beta g_mR_{\\text{eq}}\\).",
        "format": "markdown",
        "sha256": "f221fbda9aee9a9d48ffe730fd26b34fa3a6a8f282c87e26e3bad2091e629e97"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain and large-loop-gain limit. The optional resistance discussion does not undermine the essential answer.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 19710,
        "total_tokens": 21309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 19710,
        "total_tokens": 21309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an nMOS operating in saturation, with negligible gate current and body effect. The input is applied at the source and the output is taken at the drain, so this is a common-gate-like stage with voltage feedback.\n\nLet\n\\[\n\\beta=\\frac{R_2}{R_1+R_2}.\n\\]\nSince the gate draws essentially no current,\n\\[\nV_F=\\beta V_{\\text{out}}.\n\\]\nThe divider also loads the output: \\(R_1\\) and \\(R_2\\) form a series path to ground.\n\n### Small-signal gain\n\nWith \\(V_{DD}\\) at AC ground, define\n\\[\nG_L=\\frac1{R_D}+\\frac1{R_1+R_2},\\qquad g_o=\\frac1{r_o}.\n\\]\nThe MOSFET’s incremental drain current is\n\\[\ni_d=g_m(v_f-v_i)+g_o(v_o-v_i),\\qquad v_f=\\beta v_o.\n\\]\nApplying KCL at the output gives\n\\[\nG_Lv_o+i_d=0,\n\\]\nso\n\\[\n\\boxed{\\frac{v_o}{v_i}\n=\\frac{g_m+g_o}{G_L+g_o+\\beta g_m}}.\n\\]\n\nIf \\(r_o\\) is large, let \\(R_L=R_D\\parallel(R_1+R_2)\\). Then\n\\[\n\\boxed{A_v\\approx\\frac{g_mR_L}{1+\\beta g_mR_L}\n=\\frac{A_0}{1+\\beta A_0}},\\qquad A_0=g_mR_L.\n\\]\nThe gain is **non-inverting**: raising \\(V_{\\text{in}}\\) lowers \\(V_{GS}\\), reduces drain current, and raises \\(V_{\\text{out}}\\). The feedback is negative: a rise in \\(V_{\\text{out}}\\) raises \\(V_F\\), increasing drain current and pulling the output back down. For large loop gain, \\(A_v\\approx1/\\beta=(R_1+R_2)/R_2\\).\n\n### Bias point\n\nAt DC, the divider also draws current, so the output-node equation is\n\\[\n\\frac{V_{DD}-V_{OQ}}{R_D}\n=I_{DQ}+\\frac{V_{OQ}}{R_1+R_2},\n\\qquad\nV_{GSQ}=\\beta V_{OQ}-V_{in,Q}.\n\\]\nThese relations, together with the MOSFET \\(I\\)-\\(V\\) characteristic, determine the operating point; component and device values are needed for a numerical result.\n\nFor completeness, neglecting body current, the small-signal input resistance is approximately \\(R_{\\text{in}}=1/g_m+\\beta R_L\\) when \\(r_o\\) is large. The feedback therefore raises input resistance and lowers output resistance.",
        "format": "markdown",
        "sha256": "3599189e3677fbcf404fa9b212001898bb0a192a3466222d2451d1e690f69b8e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input and output-to-gate divider feedback, derives the non-inverting closed-loop gain, and explains why the feedback is negative. The finite-r_o expression is also consistent with the stated model.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 18677,
        "total_tokens": 20276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18041,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 18677,
        "total_tokens": 20276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18041,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an NMOS in saturation, with negligible gate current, and consider low-frequency small signals. Define\n\\[\nR_F=R_1+R_2,\\qquad \\beta=\\frac{R_2}{R_1+R_2}.\n\\]\nThe gate voltage is therefore \\(V_F=\\beta V_{\\text{out}}\\). The divider also loads the output through \\(R_F\\).\n\n**Feedback polarity:** If \\(V_{\\text{in}}\\) rises, \\(V_{GS}\\) falls, the drain current decreases, and \\(V_{\\text{out}}\\) rises. That rise feeds back to the gate, increasing \\(V_{GS}\\) and opposing the change in output. The feedback is negative, while the overall input-to-output gain is positive.\n\nFor the DC operating point,\n\\[\n\\frac{V_{DD}-V_{OQ}}{R_D}\n= I_{DQ}+\\frac{V_{OQ}}{R_F},\n\\qquad\nV_{GS,Q}=\\beta V_{OQ}-V_{in,Q}.\n\\]\nThese equations must be combined with the MOSFET \\(I_D\\)-\\(V_{GS}\\) relation to find the bias point; the figure alone doesn’t provide enough values for a numerical result.\n\nFor small signals, \\(V_{DD}\\) is AC ground and the output sees\n\\[\nR_L=R_D\\parallel R_F.\n\\]\nWith \\(v_f=\\beta v_o\\), the drain-node equation (neglecting \\(r_o\\) and body effect) is\n\\[\n\\frac{v_o}{R_L}+g_m(\\beta v_o-v_i)=0.\n\\]\nThus the voltage gain is\n\\[\n\\boxed{\\frac{v_o}{v_i}\n=\\frac{g_mR_L}{1+\\beta g_mR_L}}\n\\]\nor, with \\(A_0=g_mR_L\\), \\(A_v=A_0/(1+\\beta A_0)\\). For large loop gain, \\(A_v\\approx1/\\beta=(R_1+R_2)/R_2\\). If \\(R_1+R_2\\gg R_D\\), the divider’s output loading is small and \\(R_L\\approx R_D\\).",
        "format": "markdown",
        "sha256": "8abbffeae78a98226be2e83f0966be5feeb4208bf1aee845d089adefb6af0e82"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the output divider feeding the gate, the source-input relation, and negative feedback; the closed-loop gain is also correct.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 19727,
        "total_tokens": 21326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19239,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 19727,
        "total_tokens": 21326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19239,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming both devices are enhancement nMOS transistors, this is a **source-follower (common-drain) stage**. M1’s drain is tied to \\(V_{DD}\\), its gate is driven by \\(V_{in}\\), and its source is \\(V_{out}\\). M2, biased by \\(V_b\\), acts as a pull-down current sink.\n\n### DC operating point\n\nWith no external DC load, the same current flows through both transistors:\n\n\\[\nI_{D1}=I_{D2}=I_Q.\n\\]\n\nIf both are in saturation and channel-length modulation is neglected, let\n\\(\\beta_i=\\mu_n C_{ox}(W/L)_i\\). Then\n\n\\[\nI_Q \\simeq \\frac{\\beta_2}{2}(V_b-V_{T2})^2,\n\\]\n\nand\n\n\\[\nI_Q \\simeq \\frac{\\beta_1}{2}(V_{in}-V_{out}-V_{T1})^2.\n\\]\n\nThus,\n\n\\[\nV_{out}\\simeq V_{in}-V_{T1}-\\sqrt{\\frac{2I_Q}{\\beta_1}}\n\\simeq V_{in}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}(V_b-V_{T2}).\n\\]\n\nSo \\(V_{out}\\) follows \\(V_{in}\\), but sits lower by M1’s required \\(V_{GS}\\). The exact bias point depends on the device parameters and biases; body effect and channel-length modulation change these approximations.\n\n### Small-signal behavior\n\nM1 provides a **non-inverting voltage buffer** with high input resistance and relatively low output resistance. With \\(V_b\\) and \\(V_{DD}\\) AC-grounded,\n\n\\[\nA_v \\equiv \\frac{v_{out}}{v_{in}}\n\\simeq\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}+G_L},\n\\]\n\nwhere \\(G_L\\) is any load conductance. The body-effect term \\(g_{mb1}\\) applies when M1’s body is fixed rather than tied to its source. The gain is positive and usually near, but below, unity. With no load, the output resistance is approximately\n\n\\[\nR_{out}\\simeq\n\\frac{1}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}.\n\\]\n\nFor M2 to behave as a current sink, it must be on and in saturation: approximately \\(V_b>V_{T2}\\) and \\(V_{out}\\ge V_b-V_{T2}\\). M1 must also be on and satisfy \\(V_{DD}-V_{out}\\ge V_{in}-V_{out}-V_{T1}\\) for saturation. If these conditions fail, the output no longer follows the relationships above.",
        "format": "markdown",
        "sha256": "7574798f786287c7122605c13dd883c8d1023f277834765b6b00c0b52b818398"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current sink, and gives a positive gain below unity with appropriate body-effect and output-conductance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 8808,
        "total_tokens": 10032,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 8808,
        "total_tokens": 10032,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the devices are nMOS and no external load is connected, this is a **source follower** (common-drain stage) using \\(M_2\\) as a biased current sink. The DC current flows from \\(V_{DD}\\) through \\(M_1\\) and \\(M_2\\) to ground.\n\n### DC operating point\n\nWith both transistors in saturation, the same current flows through them:\n\n\\[\nI_{D1}=I_{D2}=I_D.\n\\]\n\nFor a long-channel square-law model, neglecting channel-length modulation and body effect,\n\n\\[\nI_D \\simeq \\frac{\\beta_2}{2}(V_b-V_{T2})^2\n          \\simeq \\frac{\\beta_1}{2}(V_{in}-V_{out}-V_{T1})^2,\n\\]\n\nwhere \\(\\beta_i=\\mu_n C_{ox}(W/L)_i\\). Thus,\n\n\\[\nV_{out}\\simeq V_{in}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{T2}).\n\\]\n\nSo \\(V_{out}\\) is approximately \\(V_{in}\\) minus the \\(V_{GS}\\) needed for \\(M_1\\) to carry the bias current. In practice, body effect and channel-length modulation modify this result.\n\nFor the current-sink operation to hold, \\(M_2\\) needs sufficient drain voltage:\n\n\\[\nV_{out}\\ge V_{OV2}=V_b-V_{T2}.\n\\]\n\nAlso, \\(M_1\\) must be on and have enough drain headroom to remain in saturation.\n\n### Small-signal behavior\n\nWith \\(V_{DD}\\) and \\(V_b\\) fixed, they are AC grounds. \\(M_2\\) mainly contributes its output conductance \\(g_{o2}\\). Including an output load \\(R_L\\), the approximate voltage gain is\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\simeq\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}+1/R_L}.\n\\]\n\nThe stage is **non-inverting** and its gain is below unity, usually close to one. The \\(g_{mb1}\\) term accounts for body effect; it is absent if \\(M_1\\)’s body is tied to its source. The input resistance is high, and the output resistance is roughly \\(1/(g_{m1}+g_{mb1}+g_{o1}+g_{o2})\\).",
        "format": "markdown",
        "sha256": "6a688a2a5a4e7b0d3c049b6abac6a6ee5829bcf26a7323c78113ed75cdd9fca7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as an NMOS current sink, with positive gain below unity. Its small-signal gain and output-resistance expressions appropriately include body effect and output conductances; the additional DC analysis does not undermine the core answer.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 11960,
        "total_tokens": 13184,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 11960,
        "total_tokens": 13184,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the devices are enhancement-mode nMOS transistors, this is a **source follower** (common-drain stage) biased by an nMOS current sink.\n\n### DC operation\n\nM2’s gate bias \\(V_b\\) sets the sink current. If M2 is in saturation,\n\n\\[\nV_b>V_{T2},\\qquad V_{\\text{out}}\\ge V_b-V_{T2},\n\\]\n\nand, neglecting channel-length modulation,\n\n\\[\nI_{D2}\\approx \\frac{\\beta_2}{2}(V_b-V_{T2})^2,\n\\quad \\beta_i=\\mu_n C_{\\text{ox}}(W/L)_i.\n\\]\n\nM1 has its drain at \\(V_{DD}\\) and its source at \\(V_{\\text{out}}\\), so\n\n\\[\nV_{GS1}=V_{\\text{in}}-V_{\\text{out}}.\n\\]\n\nWith no DC load, the same current flows through both devices. If M1 is also in saturation,\n\n\\[\n\\frac{\\beta_1}{2}(V_{\\text{in}}-V_{\\text{out}}-V_{T1})^2=I_{D2},\n\\]\n\ngiving\n\n\\[\nV_{\\text{out}}\\approx V_{\\text{in}}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{T2}).\n\\]\n\nThus \\(V_b\\) sets the bias current, while M1 adjusts its \\(V_{GS}\\) to carry that current. The output follows the input, shifted down by M1’s gate-source voltage. For identical devices with negligible body effect, this simplifies to \\(V_{\\text{out}}\\approx V_{\\text{in}}-V_b\\).\n\nFor both transistors to remain saturated, approximately\n\n\\[\nV_{\\text{out}}\\ge V_b-V_{T2},\n\\qquad\nV_{DD}-V_{\\text{out}}\\ge V_{GS1}-V_{T1}.\n\\]\n\nOutside this range, the bias current and follower behavior become less ideal.\n\n### Small-signal behavior\n\nWith \\(V_b\\) held fixed, M2 acts approximately as a current source; its finite output resistance loads the output. For a load conductance \\(G_L\\),\n\n\\[\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n\\approx\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}+G_L}.\n\\]\n\nThe \\(g_{mb1}\\) term applies when M1’s body is AC-grounded; omit it if its body is tied to its source. The gain is non-inverting and usually near 1. The circuit therefore acts as a high-input-impedance buffer with relatively low output resistance, not as a voltage-gain stage. Numerical values require transistor parameters and bias voltages.",
        "format": "markdown",
        "sha256": "d192558a9333d219de9a232ce09eb035033eb0b7bf88de57bcd58f1c5361087d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current sink, with positive gain near unity. The small-signal expression and output-resistance/buffering interpretation are consistent with the golden solution.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 15119,
        "total_tokens": 16343,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14491,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 15119,
        "total_tokens": 16343,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14491,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **CMOS inverter (NOT gate)**. The upper transistor \\(M_2\\) is the p-channel pull-up to \\(V_{DD}\\); the lower transistor \\(M_1\\) is the n-channel pull-down to ground. Their gates share \\(V_{in}\\), and their drains meet at \\(V_{out}\\).\n\n| Input | \\(M_1\\) (NMOS) | \\(M_2\\) (PMOS) | Output |\n|---|---|---|---|\n| \\(V_{in}\\approx 0\\) | Off | On | \\(V_{out}\\approx V_{DD}\\) |\n| \\(V_{in}\\approx V_{DD}\\) | On | Off | \\(V_{out}\\approx 0\\) |\n\nSo, in steady digital operation, \\(V_{out}=\\overline{V_{in}}\\). As the input passes through the switching region, both transistors can conduct; the output changes sharply, and current can flow from \\(V_{DD}\\) to ground. The exact switching voltage depends on the devices’ thresholds and sizes. For matched devices with symmetric threshold magnitudes, it is approximately \\(V_{DD}/2\\).",
        "format": "markdown",
        "sha256": "f3758e8524f7a2e784fdda2c49a28b745bf63f40648191ce549cfdb991b8652b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its PMOS pull-up and NMOS pull-down, and the input-output behavior. The additional switching-region discussion is also consistent with inverter operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3344,
        "total_tokens": 3624,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3086,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 3344,
        "total_tokens": 3624,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3086,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **CMOS inverter (NOT gate)**. The gates of the upper PMOS \\(M_2\\) and lower NMOS \\(M_1\\) are connected to \\(V_{\\text{in}}\\); their joined drains form \\(V_{\\text{out}}\\).\n\n| Input | \\(M_1\\) (NMOS) | \\(M_2\\) (PMOS) | Output |\n|---|---|---|---|\n| Low (\\(\\approx 0\\)) | Off | On | High (\\(\\approx V_{DD}\\)) |\n| High (\\(\\approx V_{DD}\\)) | On | Off | Low (\\(\\approx 0\\)) |\n\nThus, logically, \\(V_{\\text{out}}=\\overline{V_{\\text{in}}}\\). During a transition, both transistors may conduct briefly, and the switching point depends on their sizing and threshold voltages. In steady ideal logic states, there is no direct path from \\(V_{DD}\\) to ground; real circuits have leakage.",
        "format": "markdown",
        "sha256": "9c4d99ab07a1519b356a5e67d7c096002188b57919404903ac94ff69838c4797"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its PMOS pull-up/NMOS pull-down, with the right input-output behavior and steady-state operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 1275,
        "total_tokens": 1555,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1054,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 1275,
        "total_tokens": 1555,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1054,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **CMOS inverter**: the gates of the upper pMOS \\(M_2\\) and lower nMOS \\(M_1\\) are tied to \\(V_{\\text{in}}\\), and their drains join at \\(V_{\\text{out}}\\).\n\n| Input | \\(M_2\\) (pMOS) | \\(M_1\\) (nMOS) | Output |\n|---|---|---|---|\n| Low (\\(V_{\\text{in}}\\approx 0\\)) | On | Off | High (\\(V_{\\text{out}}\\approx V_{DD}\\)) |\n| High (\\(V_{\\text{in}}\\approx V_{DD}\\)) | Off | On | Low (\\(V_{\\text{out}}\\approx 0\\)) |\n\nThus, \\(V_{\\text{out}}=\\overline{V_{\\text{in}}}\\) in logic operation. For an intermediate input, both transistors may conduct briefly as the output switches; the exact switching point depends on their thresholds and sizes. In a steady logic state, the ideal circuit draws essentially no DC current from \\(V_{DD}\\).",
        "format": "markdown",
        "sha256": "05b2d440c3376cbf40e77c9ca26b05c906a9068d214741fadfefce24b9295038"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its PMOS pull-up and NMOS pull-down, and accurately describes the logic-level operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 1634,
        "total_tokens": 1914,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1391,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 1634,
        "total_tokens": 1914,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1391,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **CMOS inverter**: \\(M_1\\) is the upper p-channel MOSFET and \\(M_2\\) is the lower n-channel MOSFET. Their gates share \\(V_{\\text{in}}\\), and their drains meet at \\(V_{\\text{out}}\\).\n\n| \\(V_{\\text{in}}\\) | \\(M_1\\) | \\(M_2\\) | \\(V_{\\text{out}}\\) |\n|---|---|---|---|\n| Low (near 0) | On | Off | High (near \\(V_{DD}\\)) |\n| High (near \\(V_{DD}\\)) | Off | On | Low (near 0) |\n\nThus, \\(V_{\\text{out}}\\) is the logical inverse of \\(V_{\\text{in}}\\). During a transition, both transistors can conduct briefly, causing a short-lived current from \\(V_{DD}\\) to ground; the exact switching point depends on the devices’ characteristics.",
        "format": "markdown",
        "sha256": "e6779510fb16e56eb3824de0aadc81f235962c92c6d9466a649646955d20226e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer identifies M1 as p-channel and analyzes the circuit as an ordinary CMOS inverter. Both devices are NMOS, so this violates the mandatory device-identification scoring gate.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 2102,
        "total_tokens": 2397,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1887,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 2102,
        "total_tokens": 2397,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1887,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is a pMOS and \\(M_2\\) an nMOS, this is a **CMOS inverter**: their gates are tied to \\(V_{in}\\), and their drains meet at \\(V_{out}\\).\n\n| \\(V_{in}\\) | \\(M_1\\) | \\(M_2\\) | \\(V_{out}\\) |\n|---|---|---|---|\n| Low (near 0) | On | Off | High (near \\(V_{DD}\\)) |\n| High (near \\(V_{DD}\\)) | Off | On | Low (near 0) |\n\nFor an input between the logic levels, both transistors can conduct; the output transition and current then depend on their threshold voltages and relative sizes. If the transistors are not complementary, their channel types must be specified to determine the circuit’s behavior.",
        "format": "markdown",
        "sha256": "d715fa8487df6c5ce649b913cb83c144538affd48efe9e54fa79aa81e72a7f75"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as a pMOS and analyzes the circuit as an ordinary CMOS inverter. Both devices are NMOS, so the required device-type gate assigns 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 5783,
        "total_tokens": 6078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5590,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 5783,
        "total_tokens": 6078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5590,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **CMOS inverter**: \\(M_1\\) is the p-channel pull-up transistor and \\(M_2\\) is the n-channel pull-down transistor. Their gates share \\(V_{\\text{in}}\\), and their drains meet at \\(V_{\\text{out}}\\).\n\n| \\(V_{\\text{in}}\\) | \\(M_1\\) | \\(M_2\\) | \\(V_{\\text{out}}\\) |\n|---|---|---|---|\n| Low (0) | On | Off | High (\\(\\approx V_{DD}\\)) |\n| High (\\(V_{DD}\\)) | Off | On | Low (\\(\\approx 0\\)) |\n\nThus, ideally, \\(V_{\\text{out}}=\\overline{V_{\\text{in}}}\\). During a transition, both transistors can conduct briefly, causing a momentary current from \\(V_{DD}\\) to ground.",
        "format": "markdown",
        "sha256": "b4ab0143afd361886a73ba50f74a7e923416efb7dc5a98d833328992c62f2d96"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as p-channel and analyzes the circuit as an ordinary CMOS inverter. The golden solution requires recognizing both devices as NMOS; this topology error triggers a score of 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 2463,
        "total_tokens": 2758,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2262,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 2463,
        "total_tokens": 2758,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2262,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) is an nMOS pull-down, and \\(M_2\\) is a pMOS with its gate tied to its drain at \\(V_{\\text{out}}\\)—a diode-connected pMOS load. Thus, the circuit acts as an inverter, but its output levels are not generally rail-to-rail.\n\nAssume a long-channel square-law model, with \\(V_{TN}>0\\), \\(|V_{TP2}|\\) the pMOS threshold magnitude, and \\(\\beta_i=\\mu_i C_{\\text{ox}}(W/L)_i\\).\n\n### Low input\nFor \\(V_{\\text{in}}\\le V_{TN}\\), \\(M_1\\) is off. If the output starts low, \\(M_2\\) charges it upward until\n\\[\nV_{SG2}=V_{DD}-V_{\\text{out}}\\approx |V_{TP2}|,\n\\]\nso the high level is approximately\n\\[\nV_{OH}\\approx V_{DD}-|V_{TP2}|.\n\\]\nIt is therefore threshold-degraded. In an ideal zero-leakage model, the output node can float once \\(M_2\\) turns off.\n\n### High input\nFor \\(V_{\\text{in}}>V_{TN}\\), \\(M_1\\) turns on and pulls the output down. When \\(M_2\\) conducts, it is in saturation because \\(V_{SD2}=V_{SG2}\\), and\n\\[\nI_2=\\frac{\\beta_2}{2}\\bigl(V_{DD}-V_{\\text{out}}-|V_{TP2}|\\bigr)^2.\n\\]\nThe steady-state output is found from \\(I_1=I_2\\). For \\(M_1\\),\n\\[\nI_1=\n\\begin{cases}\n\\dfrac{\\beta_1}{2}(V_{\\text{in}}-V_{TN})^2,\n& V_{\\text{out}}\\ge V_{\\text{in}}-V_{TN}\\quad(M_1\\text{ saturated}),\\\\[6pt]\n\\beta_1\\!\\left[(V_{\\text{in}}-V_{TN})V_{\\text{out}}\n-\\dfrac{V_{\\text{out}}^2}{2}\\right],\n& V_{\\text{out}}<V_{\\text{in}}-V_{TN}\\quad(M_1\\text{ triode}).\n\\end{cases}\n\\]\n\nIn the saturation case this gives\n\\[\nV_{\\text{out}}=V_{DD}-|V_{TP2}|\n-\\sqrt{\\frac{\\beta_1}{\\beta_2}}\\,(V_{\\text{in}}-V_{TN}),\n\\]\nprovided the stated saturation condition holds. At a low output, \\(M_1\\) is typically in triode; then the current-balance equation determines \\(V_{OL}\\), which depends on the transistor sizes.\n\nSo the circuit inverts the input, but its high level is reduced by the pMOS threshold, its low level depends on device strength, and it draws static current from \\(V_{DD}\\) when both transistors conduct.",
        "format": "markdown",
        "sha256": "601d2944f52c100acdb371cc8ba73206dc9b5e1ae04ddebf2f37a37c1af6a985"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the NMOS common-source stage and diode-connected PMOS load, and gives a sound large-signal operating-point analysis. It omits the central small-signal inverting gain relation, so it does not earn full credit.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 14498,
        "total_tokens": 15218,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13827,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 14498,
        "total_tokens": 15218,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13827,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **diode-connected pMOS load inverter**. \\(M_1\\) is an nMOS pull-down, while \\(M_2\\) has its gate and drain tied to \\(V_{\\text{out}}\\) and its source connected to \\(V_{DD}\\).\n\nAssume a long-channel square-law model, no channel-length modulation, and no external output load. Define\n\\[\n\\beta_n=\\mu_n C_{\\text{ox}}(W/L)_1,\\qquad\n\\beta_p=\\mu_p C_{\\text{ox}}(W/L)_2,\\qquad\nA=V_{DD}-|V_{TP}|.\n\\]\n\nFor \\(M_2\\),\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{\\text{out}}.\n\\]\nThus, whenever \\(M_2\\) is on, it is in saturation, and its current magnitude is\n\\[\nI_2=\\frac{\\beta_p}{2}(A-V_{\\text{out}})^2,\\qquad V_{\\text{out}}<A.\n\\]\n\nLet \\(x=V_{\\text{in}}-V_{TN}\\). The nMOS current is\n\\[\nI_1=\n\\begin{cases}\n0, & x\\le 0,\\\\[2mm]\n\\dfrac{\\beta_n}{2}x^2, & x>0,\\quad V_{\\text{out}}\\ge x \\quad (M_1\\text{ saturation}),\\\\[2mm]\n\\beta_n\\left(xV_{\\text{out}}-\\dfrac{V_{\\text{out}}^2}{2}\\right),\n& x>0,\\quad V_{\\text{out}}<x \\quad (M_1\\text{ triode}).\n\\end{cases}\n\\]\nFor an unloaded output, the operating point with both devices conducting satisfies \\(I_1=I_2\\).\n\n- **Low input, \\(V_{\\text{in}}\\le V_{TN}\\):** \\(M_1\\) is off. If the output is low, \\(M_2\\) charges it upward until it turns off, at about\n  \\[\n  V_{\\text{out}}\\simeq V_{DD}-|V_{TP}|.\n  \\]\n  This is a threshold-degraded pull-up, not a rail-to-rail pull-up. In the ideal cutoff model, any higher output voltage can also persist when both devices are off; loading and leakage affect the actual value.\n\n- **Input above threshold, \\(x>0\\):** \\(M_1\\) pulls the output down and \\(M_2\\) supplies current. If \\(M_1\\) is saturated, current balance gives\n  \\[\n  V_{\\text{out}}=A-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,x,\n  \\]\n  valid while\n  \\[\n  x\\le \\frac{A}{1+\\sqrt{\\beta_n/\\beta_p}}.\n  \\]\n  At larger input, \\(M_1\\) is in triode and the output is found from\n  \\[\n  \\beta_n\\left(xV_{\\text{out}}-\\frac{V_{\\text{out}}^2}{2}\\right)\n  =\\frac{\\beta_p}{2}(A-V_{\\text{out}})^2.\n  \\]\n\nSo \\(V_{\\text{out}}\\) falls as \\(V_{\\text{in}}\\) rises, but the circuit is not a conventional CMOS inverter: its high level is degraded, its low level depends on transistor sizing, and when \\(M_1\\) is on there is static current from \\(V_{DD}\\) through \\(M_2\\) and \\(M_1\\) to ground.",
        "format": "markdown",
        "sha256": "3ed57d88c45a573c3ca2d4474d4002e77be3fb3b5a8461512e0c1d64c95946d5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the NMOS common-source stage with a diode-connected PMOS load and gives a sound large-signal analysis. However, it omits the central small-signal gain, approximately \u0000-gm1/gm2\u0000 (or its channel-length-modulation form); qualitative inversion alone does not provide that result.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 20776,
        "total_tokens": 21496,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 20776,
        "total_tokens": 21496,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_2\\)’s gate and drain are tied to \\(V_{\\text{out}}\\), so it is a **diode-connected PMOS load**. \\(M_1\\) is an NMOS pull-down. This is an inverting stage, but not a conventional complementary CMOS inverter.\n\nAssume long-channel square-law MOSFETs and define \\(\\beta_i=\\mu_i C_{\\text{ox}}(W/L)_i\\). The PMOS has\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{\\text{out}},\n\\]\nso, when it is on, it is in saturation and its current magnitude is\n\\[\nI_2=\\frac{\\beta_p}{2}\\left(V_{DD}-V_{\\text{out}}-|V_{TP}|\\right)^2,\n\\qquad V_{\\text{out}}<V_{DD}-|V_{TP}|.\n\\]\n\nFor \\(M_1\\), \\(V_{GS1}=V_{\\text{in}}\\) and \\(V_{DS1}=V_{\\text{out}}\\). It is off for \\(V_{\\text{in}}\\le V_{TN}\\); when on,\n\\[\nI_1=\n\\begin{cases}\n\\dfrac{\\beta_n}{2}(V_{\\text{in}}-V_{TN})^2,\n& V_{\\text{out}}\\ge V_{\\text{in}}-V_{TN}\\quad\\text{(saturation)},\\\\[6pt]\n\\beta_n\\!\\left[(V_{\\text{in}}-V_{TN})V_{\\text{out}}\n-\\dfrac{V_{\\text{out}}^2}{2}\\right],\n& V_{\\text{out}}<V_{\\text{in}}-V_{TN}\\quad\\text{(triode)}.\n\\end{cases}\n\\]\nWhen both devices conduct, the DC output is set by \\(I_1=I_2\\).\n\n- **Low input:** \\(M_1\\) is off. Starting from a lower voltage, \\(V_{\\text{out}}\\) charges until \\(M_2\\) turns off. The nominal high level is therefore\n  \\[\n  V_{OH}\\approx V_{DD}-|V_{TP}|,\n  \\]\n  rather than \\(V_{DD}\\), in this ideal threshold-cutoff model.\n- **Input above \\(V_{TN}\\):** \\(M_1\\) turns on and pulls the output down. If \\(M_1\\) is saturated, current balance gives\n  \\[\n  V_{\\text{out}}=V_{DD}-|V_{TP}|\n  -\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,(V_{\\text{in}}-V_{TN}),\n  \\]\n  valid while \\(V_{\\text{out}}\\ge V_{\\text{in}}-V_{TN}\\). At larger inputs, \\(M_1\\) is typically in triode and the triode current equation above must be used.\n\nFor a strong \\(M_1\\) and a small low-level output, a useful approximation is\n\\[\nV_{OL}\\approx\n\\frac{\\beta_p}{2\\beta_n}\\,\n\\frac{(V_{DD}-|V_{TP}|)^2}{V_{\\text{in}}-V_{TN}}.\n\\]\n\nThus the output inverts, but its levels depend on transistor sizing: the high level is degraded, and the low level is not exactly zero. With a high input, both transistors conduct, creating a static path from \\(V_{DD}\\) to ground and consuming DC power.",
        "format": "markdown",
        "sha256": "6c18171a1d62c64b4870782bc4025dc05e1967b882b41aa4baa2228fd49fb6dc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and describes its inverting large-signal behavior. However, it omits the central small-signal gain, such as \\(-g_{m1}/g_{m2}\\) or its channel-length-modulation form.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 17020,
        "total_tokens": 17740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 17020,
        "total_tokens": 17740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the usual enhancement-mode CMOS devices, \\(M_2\\) is the pMOS pull-up and \\(M_1\\) the nMOS pull-down. But \\(M_1\\)’s gate is tied to ground, as is its source, so \\(V_{GS1}=0\\) and \\(M_1\\) is off regardless of \\(V_{in}\\).\n\n| \\(V_{in}\\) | \\(M_2\\) | \\(M_1\\) | \\(V_{out}\\) |\n|---|---|---|---|\n| Low | On | Off | Pulled up to \\(V_{DD}\\) |\n| High | Off | Off | High-impedance / floating |\n\nSo this is **not a functioning CMOS inverter**: when \\(V_{in}\\) is high, nothing drives \\(V_{out}\\) low. Its voltage then depends on stored charge, leakage, or any external load. For a CMOS inverter, \\(M_1\\)’s gate would also be connected to \\(V_{in}\\).",
        "format": "markdown",
        "sha256": "3f55eeb2cb01ff12e70e59c0f65e79290dbc32020136143f642cc893e7bc4c77"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS that is off and treats the output as floating. The circuit has two PMOS devices; M1 is a diode-connected PMOS load, giving a gm/gm amplifier.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 11819,
        "total_tokens": 13497,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11593,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 11819,
        "total_tokens": 13497,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11593,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the usual enhancement-mode CMOS devices, \\(M_2\\) is the pMOS pull-up and \\(M_1\\) is the nMOS pull-down.\n\nFor \\(M_1\\), both its gate and source are grounded, so \\(V_{GS1}=0\\); it is off for any \\(V_{in}\\). For \\(M_2\\), \\(V_{SG2}=V_{DD}-V_{in}\\), so it conducts when \\(V_{in}\\) is sufficiently low.\n\n| Input | \\(M_2\\) | \\(M_1\\) | Output |\n|---|---|---|---|\n| Low | On | Off | Pulled up to approximately \\(V_{DD}\\) |\n| High (near \\(V_{DD}\\)) | Off | Off | High-impedance / undetermined |\n\nThus, when \\(V_{in}\\) is high, there is no path to pull \\(V_{out}\\) low. The output may retain its previous charge, or be set by leakage or an external load. **This is not a CMOS inverter**; connecting \\(M_1\\)’s gate to \\(V_{in}\\) would provide the pull-down action.",
        "format": "markdown",
        "sha256": "5d7816be18118f962896c70f7112935040638208e5f5afe6b8d8a66906e204f0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS and treats it as off, missing that it is a diode-connected PMOS load. It therefore gives the wrong high-input behavior and misses the gm/gm amplifier interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 14664,
        "total_tokens": 16342,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14405,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 14664,
        "total_tokens": 16342,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14405,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the usual enhancement-mode CMOS interpretation, \\(M_2\\) is the upper pMOS and \\(M_1\\) the lower nMOS.\n\n- \\(M_1\\) has its gate and source at ground, so \\(V_{GS1}=0\\) and it is **off**.\n- \\(M_2\\) has its source at \\(V_{DD}\\), so it turns on when \\(V_{DD}-V_{\\text{in}}>|V_{TP}|\\).\n\nThus, for logic-level inputs:\n\n| \\(V_{\\text{in}}\\) | \\(M_2\\) | \\(M_1\\) | \\(V_{\\text{out}}\\) |\n|---|---|---|---|\n| Low | On | Off | Driven high, toward \\(V_{DD}\\) |\n| High | Off | Off | High-impedance (floating), not driven low |\n\nSo this circuit is **not a proper inverter**: when the input is high, neither transistor provides a path to ground. The output then depends on its previous charge, leakage, and any external load.",
        "format": "markdown",
        "sha256": "ba0b4a3bc45177462ede9ca6e0d487864eca3786a9c2f32424a32d5f79c58456"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS and treats it as off, missing the essential diode-connected PMOS load and the resulting gm/gm amplifier.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 15369,
        "total_tokens": 17047,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15133,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 15369,
        "total_tokens": 17047,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15133,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) as AC ground. The transistor at the output is \\(M_1\\); its source is node \\(X\\), which sees \\(r_{o2}\\) to AC ground through \\(M_2\\). Thus the small-signal resistance is\n\n\\[\nR_{\\text{out}}\n= r_{o1}+(1+g_{m1}r_{o1})r_{o2}\n= r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}.\n\\]\n\nFor \\(g_{m1}r_{o1}\\gg1\\), this is approximately \\(g_{m1}r_{o1}r_{o2}\\). If body effect is included, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).\\)",
        "format": "markdown",
        "sha256": "17586296926fa27b621065b198fc0608b0af8619f149626ca09b8d7f2975bd6d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the output-side cascode device and gives the correct Rout expression and approximation. Including body effect is optional, and omitting an explicit PMOS label is allowed by the full-credit rule.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2669,
        "output_tokens": 13670,
        "total_tokens": 16339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2669,
        "output_tokens": 13670,
        "total_tokens": 16339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "With \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) fixed, they are AC grounds. Thus M2 contributes \\(r_{o2}\\) from node \\(X\\) to ground, while M1’s transconductance boosts the resistance seen at the output:\n\n\\[\n\\boxed{R_{\\text{out}}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nFor \\(g_{m1}r_{o2}\\gg 1\\), this is approximately \\(g_{m1}r_{o1}r_{o2}\\). This neglects body effect; including it replaces \\(g_{m1}\\) with \\(g_{m1}+g_{mb1}\\).",
        "format": "markdown",
        "sha256": "c29cb97efafa849ee1af98c5b3547d7f73efa34a9f42bd4d6fc512512bb7fbe6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the cascode device and gives the appropriate Rout expression and approximation; the optional body-effect correction is also correct.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 7943,
        "total_tokens": 10612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 7943,
        "total_tokens": 10612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7768,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "With \\(V_{DD}\\) and both gate biases at AC ground, \\(M_2\\) contributes \\(r_{o2}\\) from node \\(X\\) to ground. Looking into the drain of \\(M_1\\), its transconductance boosts the resistance:\n\n\\[\n\\boxed{R_{\\text{out}}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nThis neglects body effect; including it replaces \\(g_{m1}\\) with \\(g_{m1}+g_{mb1}\\).",
        "format": "markdown",
        "sha256": "ebf99868e9812b20370c75879bec59374c0d0f51454565f44384f45e617847d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer gives the correct output-resistance expression with M1 as the transconductance-boosting device; omitting body effect is allowed.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 14633,
        "total_tokens": 17302,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 14633,
        "total_tokens": 17302,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_2\\) is the pMOS shown, its source is at \\(V_{DD}\\), its gate is at \\(V_{b2}\\), and its drain is node \\(X\\). It must be on and satisfy the pMOS saturation condition:\n\n\\[\nV_{SG2}>|V_{TP2}|,\\qquad\nV_{SD2}\\ge V_{SG2}-|V_{TP2}|.\n\\]\n\nSubstituting the node voltages gives\n\n\\[\nV_{DD}-V_X\\ge V_{DD}-V_{b2}-|V_{TP2}|,\n\\]\n\nso the saturation requirement is\n\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|}.\n\\]\n\nThus, choose the bias and operating point so this holds for the highest expected \\(V_X\\), preferably with margin. The schematic alone doesn’t guarantee saturation; \\(X\\) depends on the DC operating point of \\(M_1\\) and the load. Also, \\(M_2\\) must be on: \\(V_{DD}-V_{b2}>|V_{TP2}|\\).",
        "format": "markdown",
        "sha256": "bf93cc95df8e9ef7b0782da9d6cbed4da8e9b74529c0007ce07ddd080531be06"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Correctly identifies M2 as a PMOS and states its saturation condition, but gives only a condition on VX and Vb2. It misses that VX is set mainly by Vb1 and therefore fails to give the required condition on Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 13714,
        "total_tokens": 16279,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 13714,
        "total_tokens": 16279,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the pMOS \\(M_2\\), the source is at \\(V_{DD}\\), the drain is at \\(X\\), and the gate is at \\(V_{b2}\\). Saturation requires\n\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP2}|.\n\\]\n\nSubstituting the node voltages gives\n\n\\[\nV_{DD}-V_X\\ge V_{DD}-V_{b2}-|V_{TP2}|\n\\quad\\Longleftrightarrow\\quad\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|}.\n\\]\n\nSo choose the biases and operating point so \\(X\\) stays below that limit with some margin. Also ensure \\(M_2\\) is on: \\(V_{DD}-V_{b2}>|V_{TP2}|\\). Since \\(X\\) is set by \\(M_1\\) and the lower circuit, check the inequality over the expected operating range.",
        "format": "markdown",
        "sha256": "fb11684dbfa6613022cf5a10fad81bdd6649d0b88a7ee4cc78a790bc54de292d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The PMOS saturation condition is correct, and the answer notes that M1 influences X. But it does not relate X to Vb1 or derive the required Vb1 bias constraint, which is the key design point.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 17552,
        "total_tokens": 20117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17336,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 17552,
        "total_tokens": 20117,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17336,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M2 is a pMOS, with its source at \\(V_{DD}\\), gate at \\(V_{b2}\\), and drain at \\(X\\). Its saturation condition is\n\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP2}|.\n\\]\n\nSubstituting the node voltages gives\n\n\\[\nV_{DD}-V_X\\ge V_{DD}-V_{b2}-|V_{TP2}|,\n\\]\n\nso M2 is saturated when\n\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|}.\n\\]\n\nTo ensure it stays saturated over the circuit’s operating range, choose \\(V_{b2}\\) so this holds for the **maximum** possible \\(V_X\\), with some margin. M2 must also be on: \\(V_{DD}-V_{b2}>|V_{TP2}|\\).",
        "format": "markdown",
        "sha256": "8327548b46e686243e153c323da7d149001d3a9f313eda2476bd21d71875cad0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The PMOS saturation condition is correct, but the answer treats Vb2 as the control and does not relate VX to Vb1, which sets VX through M1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 2784,
        "total_tokens": 5349,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 2784,
        "total_tokens": 5349,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS cascode common-source amplifier**. \\(M_1\\) converts the input voltage to a drain-current change; \\(M_2\\), with its gate fixed at \\(V_{b1}\\), acts as a common-gate cascode. The current path is \\(V_{DD}\\to I_1\\to M_2\\to M_1\\to\\text{ground}\\). An increase in \\(V_{in}\\) tends to increase \\(M_1\\)’s current, so \\(V_{out}\\) falls: the stage is inverting.\n\n### DC bias and headroom\n\nNeglecting gate current, the same current flows through both transistors:\n\n\\[\nI_{D1}=I_{D2}\\simeq I_1.\n\\]\n\nFor square-law MOSFETs in saturation, ignoring body effect and channel-length modulation,\n\n\\[\nV_{in,Q}\\simeq V_{T1}+\\sqrt{\\frac{2I_1}{\\beta_1}},\n\\qquad\nV_X\\simeq V_{b1}-V_{T2}-\\sqrt{\\frac{2I_1}{\\beta_2}},\n\\]\n\nwhere \\(\\beta_i=\\mu_n C_{ox}(W/L)_i\\). The bias must keep both devices in saturation:\n\n\\[\nV_X\\ge V_{OV1},\\qquad\nV_{out}\\ge V_X+V_{OV2}.\n\\]\n\nA real current-source load also needs headroom, so \\(V_{out}\\) must remain sufficiently below \\(V_{DD}\\). With ideal saturated-device models, these conditions give a valid range for \\(V_{out}\\), not a unique DC value; real device output characteristics determine the precise operating point.\n\n### Small-signal behavior\n\nFor small signals, \\(V_{DD}\\) and \\(V_{b1}\\) are AC ground. An ideal \\(I_1\\) is an open circuit in the small-signal model. Let \\(r_{o1}\\) and \\(r_{o2}\\) be the transistor output resistances. The cascode stack has approximately\n\n\\[\nR_{\\text{stack}}\n\\simeq r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}.\n\\]\n\nIf the current source has finite output resistance \\(r_{o,I}\\), the output resistance is \\(R_{\\text{stack}}\\parallel r_{o,I}\\). In the usual high-gain approximation,\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx -g_{m1}\\bigl(R_{\\text{stack}}\\parallel r_{o,I}\\bigr).\n\\]\n\nFor an ideal current source and high intrinsic gain, this reduces to\n\n\\[\nA_v\\approx -g_{m1}g_{m2}r_{o1}r_{o2}.\n\\]\n\nThus, the cascode’s main benefit is its high output resistance—and consequently high voltage gain—while \\(V_{b1}\\) helps keep \\(M_1\\) in saturation. No numerical gain or operating voltage can be found without device and bias values.",
        "format": "markdown",
        "sha256": "0d760201cdc3608aebd18becaccf02a9ba0313c326042a7d479506f524e120f1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the appropriate gain in terms of the output resistance, including the ideal-load approximation. The reasoning and inversion are consistent with the golden solution.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 21205,
        "total_tokens": 22507,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20535,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 21205,
        "total_tokens": 22507,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20535,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS cascode amplifier** with a current-source load. \\(M_1\\) is the common-source input transistor, and \\(M_2\\), whose gate is biased by \\(V_{b1}\\), is the common-gate cascode transistor. The output is taken at \\(M_2\\)’s drain.\n\n### DC bias and headroom\n\nFor a valid operating point with both MOSFETs on,\n\n\\[\nI_{D1}=I_{D2}=I_1.\n\\]\n\nUsing the square-law model and neglecting channel-length modulation, define \\(V_{OVi}=V_{GSi}-V_{Ti}\\) and \\(\\beta_i=\\mu_n C_{\\text{ox}}(W/L)_i\\). Then approximately\n\n\\[\nV_{in,Q}=V_{T1}+\\sqrt{\\frac{2I_1}{\\beta_1}},\\qquad\nV_X=V_{b1}-V_{T2}-\\sqrt{\\frac{2I_1}{\\beta_2}}.\n\\]\n\nThe devices must remain in saturation:\n\n\\[\nV_X\\ge V_{OV1},\\qquad V_{out}-V_X\\ge V_{OV2}.\n\\]\n\nThe current source also needs sufficient voltage headroom between \\(V_{DD}\\) and \\(V_{out}\\). Thus \\(V_{b1}\\) sets the cascode bias and must leave enough voltage for both transistors to operate correctly. No numerical operating point can be found without device and bias values.\n\n### Small-signal behavior\n\nWith \\(V_{b1}\\) held fixed, \\(M_2\\)’s gate is at AC ground. The cascode raises the resistance looking into the transistor stack. With \\(r_{oi}\\) denoting transistor output resistance,\n\n\\[\nR_{\\text{cas}}\\approx r_{o1}+r_{o2}\n +(g_{m2}+g_{mb2})r_{o1}r_{o2},\n\\]\n\nwhere \\(g_{mb2}\\) is the body-effect transconductance; omit it if body effect is ignored. If the current source has finite output resistance \\(r_I\\) and there is a load \\(R_L\\), the output resistance is approximately\n\n\\[\nR_{\\text{out}}\\approx R_{\\text{cas}}\\parallel r_I\\parallel R_L.\n\\]\n\nThe stage is **inverting**: increasing \\(v_{in}\\) makes \\(M_1\\) pull more current, so \\(v_{out}\\) moves downward. A useful high-gain estimate is\n\n\\[\nA_v\\approx -g_{m1}R_{\\text{out}},\n\\]\n\nand, when the cascode term dominates and the current-source load is ideal,\n\n\\[\nA_v\\approx -g_{m1}(g_{m2}+g_{mb2})r_{o1}r_{o2}.\n\\]\n\nThe MOS gate makes the input resistance very high, while the cascode provides high output resistance and helps shield \\(M_1\\) from output-voltage swings.",
        "format": "markdown",
        "sha256": "eac937c2df195e4dc51e3046074f424c7a62af3fc7d448906a00263e1eb5cf7f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the accepted gain forms, including the ideal-load approximation. The added bias and output-resistance discussion is consistent with the circuit.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 22922,
        "total_tokens": 24224,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 22922,
        "total_tokens": 24224,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) and \\(M_2\\) are NMOS transistors, this is a **common-source cascode amplifier with a current-source load**. Node \\(X\\) is the drain of \\(M_1\\) and source of \\(M_2\\).\n\n### DC bias and operating range\n\nWith no DC load connected to \\(V_{\\text{out}}\\), the devices are in series, so a valid operating point requires\n\\[\nI_{D1}=I_{D2}=I_1.\n\\]\nIn the square-law saturation approximation, with \\(\\beta_i=\\mu_n C_{\\text{ox}}(W/L)_i\\),\n\\[\nV_{\\text{in,Q}}\\simeq V_{T1}+\\sqrt{\\frac{2I_1}{\\beta_1}},\n\\qquad\nV_X\\simeq V_{b1}-V_{T2}(V_X)-\\sqrt{\\frac{2I_1}{\\beta_2}}.\n\\]\nThe \\(V_{T2}(V_X)\\) term allows for body effect if \\(M_2\\)’s body is tied to ground.\n\nFor both transistors to remain saturated,\n\\[\nV_X\\ge V_{OV1},\n\\qquad\nV_{\\text{out}}-V_X\\ge V_{OV2}.\n\\]\nThus \\(V_{\\text{out}}\\) must be at least about \\(V_X+V_{OV2}\\); the current source also needs its own headroom below \\(V_{DD}\\). The bias \\(V_{b1}\\) sets \\(X\\), which should be high enough to keep \\(M_1\\) saturated but low enough to leave headroom for \\(M_2\\). An ideal current-source model does not by itself set a unique \\(V_{\\text{out,Q}}\\); real output resistances and loading determine its exact value.\n\n### Small-signal behavior\n\n\\(M_1\\) converts the input voltage into a drain-current change. \\(M_2\\), whose gate is held at the fixed bias \\(V_{b1}\\), is a common-gate cascode device. It reduces the effect of output-voltage changes at node \\(X\\) and raises the output resistance.\n\nA rise in \\(V_{\\text{in}}\\) tends to increase the stack current, so \\(V_{\\text{out}}\\) falls: the voltage gain is **inverting**. The MOS gate makes the input resistance very high at low frequency.\n\nIgnoring body effect, the resistance looking into the transistor stack is approximately\n\\[\nR_{\\text{cas}}\\simeq r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}.\n\\]\nIncluding body effect for \\(M_2\\), replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\). The total output resistance is approximately\n\\[\nR_{\\text{out}}\\simeq R_{\\text{cas}}\\parallel r_{oI}\\parallel R_L,\n\\]\nwhere \\(r_{oI}\\) is the current source’s output resistance and \\(R_L\\) is any external load. The usual gain estimate is\n\\[\n\\boxed{A_v\\simeq -g_{m1}R_{\\text{out}}.}\n\\]\nFor an ideal current source and no external load, \\(r_{oI}\\to\\infty\\) and \\(R_L\\to\\infty\\), so \\(R_{\\text{out}}\\simeq R_{\\text{cas}}\\).\n\nNumerical bias voltages or gain would require device parameters, supply and bias values, and any output load.",
        "format": "markdown",
        "sha256": "e6113adc3f8164825846a7b2fe5746a2e06ae17430e07d3324ada110d3753c50"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the input common-source NMOS and M2 as the common-gate NMOS cascode, and gives the accepted gain estimate \\(A_v\\simeq-g_{m1}R_{out}\\). The additional bias and output-resistance discussion is consistent with the circuit.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 15205,
        "total_tokens": 16507,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14427,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 15205,
        "total_tokens": 16507,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14427,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. It is a **cascode amplifier**: \\(M_1\\) is the common-source input transistor, and \\(M_2\\), with its gate held at the bias voltage \\(V_{b1}\\), is the common-gate cascode transistor. The output is taken from \\(M_2\\)’s drain through \\(R_D\\). Both transistors must be biased in the appropriate operating region for the intended cascode behavior.",
        "format": "markdown",
        "sha256": "b7d6fb350fe75af85260cd429ea42ca45e755c12e758b6313b94c7f2177c0b50"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower with its drain grounded, not a common-source input device, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 273,
        "total_tokens": 1649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 175,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 273,
        "total_tokens": 1649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 175,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. It is an NMOS cascode: \\(M_1\\) is the common-source input transistor, and \\(M_2\\), with its gate held at the bias voltage \\(V_{b1}\\), is the common-gate cascode transistor. The output is taken from \\(M_2\\)’s drain. Both transistors must be biased appropriately—typically in saturation—for the intended cascode operation.",
        "format": "markdown",
        "sha256": "77b8fd3da3799ef92d9deda288f6cbeebfec6f86191656e888e0ad077287b8c9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Incorrectly calls the circuit a cascode and misidentifies M1 as a common-source input transistor. M1 is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 323,
        "total_tokens": 1699,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 231,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 323,
        "total_tokens": 1699,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 231,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. It is an NMOS cascode: \\(M_1\\) is the common-source input transistor, and \\(M_2\\), with its gate held at the bias voltage \\(V_{b1}\\), is the common-gate cascode transistor. The output is taken from \\(M_2\\)’s drain. In normal operation, \\(M_2\\) helps keep \\(M_1\\)’s drain voltage relatively steady and increases the stage’s output resistance.",
        "format": "markdown",
        "sha256": "60c26fc6311dfb280821044ec48affa572729fcc39409f82661967662c5c878b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a common-source input device. M1 is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 325,
        "total_tokens": 1701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 220,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 325,
        "total_tokens": 1701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 220,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Miller multiplication depends on the voltage gain **across the parasitic capacitance**, not necessarily the amplifier’s overall gain.\n\nIn a common-emitter stage, the collector swings strongly in the opposite direction to the base. So the base–collector capacitance \\(C_\\mu\\) sees a large voltage change and appears at the input as roughly\n\\[\nC_{\\text{in}} \\approx C_\\mu(1+|A_v|).\n\\]\n\nIn a cascode, the upper common-base transistor presents a low small-signal impedance at the lower transistor’s collector. That intermediate node therefore moves very little, so the lower transistor’s \\(C_\\mu\\) is not exposed to the large output swing. Its effective input contribution is closer to \\(C_\\mu\\) than to \\(C_\\mu(1+|A_v|)\\). The cascode can still have high overall gain; the upper transistor largely isolates that gain from the input transistor’s feedback capacitance. The effect is reduced, not eliminated.",
        "format": "markdown",
        "sha256": "c5764d5a4805f1619c41862404a23d5a805a497d6162a250e7c8831a9ff78ba9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode intermediate node and explains why it reduces Miller multiplication while not eliminating it. It could be more precise that the multiplication is roughly 2, not nearly unity, but that is a minor imprecision.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2076,
        "total_tokens": 2095,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1863,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2076,
        "total_tokens": 2095,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1863,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect occurs when a feedback capacitance connects an input to a voltage-amplified output. For a capacitance \\(C_f\\),\n\n\\[\nC_{\\text{in}} \\approx C_f(1-A_v).\n\\]\n\nIn a common-emitter stage, the collector swings strongly and in the opposite direction to the input, so \\(C_{BC}\\) can appear at the input as a much larger capacitance.\n\nIn a cascode, the input transistor’s collector is connected to the emitter of a common-base transistor. That emitter is a relatively low-impedance node, so it has only a small voltage swing; the large output swing occurs at the *upper* transistor’s collector instead. Consequently, the input transistor’s \\(C_{BC}\\) is multiplied by the modest gain to the intermediate node—not by the cascode’s full voltage gain.\n\nSo the Miller effect is reduced, not eliminated: finite node swing and other parasitic capacitances still contribute.",
        "format": "markdown",
        "sha256": "724215937bfd96d688db0b466578e3a1f166b173f9022e72d28283ed7f924645"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that the cascode’s low-impedance intermediate node limits the gain across the input transistor’s feedback capacitance, so it is multiplied by less than the full-stage gain. It also notes that the effect is reduced, not eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2494,
        "total_tokens": 2513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2291,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2494,
        "total_tokens": 2513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2291,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect comes from a capacitance between an input and an **inverting, high-gain output**. In a common-source or common-emitter stage, the drain/collector swings substantially, so the gate-drain or base-collector capacitance appears at the input as\n\n\\[\nC_{\\text{in}} \\approx C_{gd}(1-A_v),\n\\]\n\nwhere \\(A_v\\) is the voltage gain. Because \\(A_v\\) is large and negative, this can greatly magnify the apparent capacitance.\n\nIn a cascode, the upper common-gate/common-base transistor shields the lower transistor’s drain/collector from the large output swing. That intermediate node has low impedance and moves relatively little, so the voltage gain across the lower transistor’s \\(C_{gd}\\) or \\(C_\\mu\\) is much smaller than the cascode’s overall gain. The capacitance is therefore multiplied much less. The Miller effect isn’t eliminated, but it is greatly reduced.",
        "format": "markdown",
        "sha256": "2bb54e6fba0294cfca7e6d7dff6123f3d8867ccfde2883a3eebadf8198db8347"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode intermediate node, which limits the lower transistor’s drain swing and reduces Miller multiplication relative to the full-stage gain. It also correctly notes the effect is reduced, not eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2796,
        "total_tokens": 2815,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 2796,
        "total_tokens": 2815,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the usual CMOS interpretation, \\(M_1\\) is a pMOS load and \\(M_2\\) is an nMOS whose gate is biased by \\(V_{b1}\\). The input is applied to \\(M_2\\)’s source, so this is a **common-gate amplifier**. The drains of the two transistors meet at \\(V_{\\text{out}}\\).\n\n### DC bias\n\nLet \\(V_{I,Q}\\) and \\(V_{O,Q}\\) be the input and output DC levels. With no DC load attached, the current supplied by \\(M_1\\) must equal the current sunk by \\(M_2\\):\n\\[\nI_{P1}=I_{N2}.\n\\]\nIn the square-law model, neglecting channel-length modulation,\n\\[\nI_{P1}\\simeq \\frac{\\beta_{p1}}{2}\n\\bigl(V_{DD}-V_{b2}-|V_{TP1}|\\bigr)^2,\n\\qquad\nI_{N2}\\simeq \\frac{\\beta_{n2}}{2}\n\\bigl(V_{b1}-V_{I,Q}-V_{TN2}\\bigr)^2.\n\\]\n\nFor both devices to be on and in saturation,\n\\[\nV_{b1}-V_{I,Q}>V_{TN2},\\qquad\nV_{O,Q}\\ge V_{b1}-V_{TN2},\n\\]\n\\[\nV_{DD}-V_{b2}>|V_{TP1}|,\\qquad\nV_{O,Q}\\le V_{b2}+|V_{TP1}|.\n\\]\nThus the output bias must lie in the overlap of these limits. Body effect can change \\(V_{TN2}\\).\n\n### Small-signal behavior\n\nTreat \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) as AC grounds. \\(M_1\\) then acts mainly as its output resistance \\(r_{o1}\\). For \\(M_2\\),\n\\[\nv_{gs2}=-v_i,\\qquad v_{ds2}=v_o-v_i.\n\\]\nThe gain, including finite output resistances and an optional load \\(R_L\\), is\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\n=\\frac{g_{m2}+g_{mb2}+g_{ds2}}\n{g_{ds1}+g_{ds2}+1/R_L}\n}\n\\]\nwhere \\(g_{ds}=1/r_o\\). Set \\(1/R_L=0\\) if there is no external load. If body effect is neglected, set \\(g_{mb2}=0\\).\n\nTypically,\n\\[\nA_v \\simeq +(g_{m2}+g_{mb2})\n\\bigl(r_{o1}\\parallel r_{o2}\\parallel R_L\\bigr).\n\\]\nThe gain is **noninverting**: increasing \\(V_{\\text{in}}\\) reduces \\(M_2\\)’s \\(V_{GS}\\) and pull-down current, so \\(V_{\\text{out}}\\) rises. With the input held at AC ground, the unloaded output resistance is approximately \\(r_{o1}\\parallel r_{o2}\\); the common-gate input resistance is usually low, roughly \\(1/(g_{m2}+g_{mb2})\\).",
        "format": "markdown",
        "sha256": "2fe73cfaac6d1de7ef426b14148753f345cc8111118ace7503599a096673b3b6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, source-applied input, biasing, noninverting behavior, and low input resistance. Its finite-r_o gain expression is equivalent to the expected gain; the input-resistance approximation is acceptable under the full-credit rule.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 29535,
        "total_tokens": 30759,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28815,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 29535,
        "total_tokens": 30759,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28815,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As drawn, \\(M_1\\) is a pMOS with its source at \\(V_{DD}\\), and \\(M_2\\) is an nMOS drawn rotated: its gate is biased by \\(V_{b1}\\), its source receives \\(V_{in}\\), and its drain is at \\(V_{out}\\). The circuit is therefore a **common-gate amplifier with a pMOS current-source load**.\n\n### DC bias\n\nLet \\(V_{in,Q}\\) and \\(V_{out,Q}\\) be the quiescent voltages. The devices must be on:\n\n\\[\nV_{DD}-V_{b2}>|V_{TP}|,\\qquad\nV_{b1}-V_{in,Q}>V_{TN}.\n\\]\n\nFor both devices to remain in saturation, approximately\n\n\\[\nV_{b1}-V_{TN}\\le V_{out,Q}\\le V_{b2}+|V_{TP}|.\n\\]\n\nWith no DC load at the output, the pMOS current supplied must equal the nMOS current sunk. Ignoring channel-length modulation,\n\n\\[\nI_{Q1}\\simeq \\frac{\\beta_{p1}}{2}\n\\bigl(V_{DD}-V_{b2}-|V_{TP}|\\bigr)^2,\n\\qquad\nI_{Q2}\\simeq \\frac{\\beta_{n2}}{2}\n\\bigl(V_{b1}-V_{in,Q}-V_{TN}\\bigr)^2,\n\\]\n\nand the bias should satisfy \\(I_{Q1}=I_{Q2}\\). The exact output bias depends on device parameters and any output load.\n\n### Small-signal behavior\n\nTreat \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) as AC ground. \\(M_1\\) then acts mainly as an output resistance \\(r_{o1}\\); \\(M_2\\) supplies the transconductance. A rise in \\(v_{in}\\) reduces \\(M_2\\)’s \\(V_{GS}\\) and drain current, so \\(V_{out}\\) rises: the gain is **non-inverting**.\n\nWith an output load \\(R_L\\), let \\(g_{oi}=1/r_{oi}\\) and \\(g_L=1/R_L\\). The low-frequency small-signal gain is\n\n\\[\n\\frac{v_o}{v_i}\n=\n\\frac{g_{m2}+g_{mb2}+g_{o2}}\n     {g_{o1}+g_{o2}+g_L}.\n\\]\n\nHere \\(g_{mb2}\\) accounts for body effect when \\(M_2\\)’s body is AC-grounded; omit it if body effect is ignored. Usually \\(g_{m2}\\gg g_{o2}\\), giving\n\n\\[\nA_v \\simeq +(g_{m2}+g_{mb2})\n\\bigl(r_{o1}\\parallel r_{o2}\\parallel R_L\\bigr).\n\\]\n\nWith the input source AC-grounded, the output resistance is approximately \\(r_{o1}\\parallel r_{o2}\\). The familiar common-gate input resistance is roughly \\(1/(g_{m2}+g_{mb2})\\) when the drain is held at AC ground; with the high-resistance active load shown, the exact input resistance also depends on the output termination.",
        "format": "markdown",
        "sha256": "521e4c58ae083bbef8a649e2d4dd06dc0ba1bc9ee55a734e94f8460b0c4876a4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stage, source-driven input, PMOS current-source load, bias nodes, and non-inverting gain. Its gain expression is equivalent to the required gm2(ro1||ro2) approximation; the input-resistance discussion appropriately notes dependence on output termination.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 31554,
        "total_tokens": 32778,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30835,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 31554,
        "total_tokens": 32778,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30835,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the usual CMOS polarities, **M2 is an NMOS common-gate input device**, and **M1 is a PMOS active-load/current-source device**. The output is their common drain node.\n\n### DC bias\n\nLet \\(V_{IN,Q}\\) be the input’s DC level. The gate biases set\n\n\\[\nV_{GS2}=V_{b1}-V_{IN,Q},\\qquad\nV_{SG1}=V_{DD}-V_{b2}.\n\\]\n\nFor both devices to be on and in saturation,\n\n\\[\nV_{b1}-V_{IN,Q}>V_{TN},\\qquad V_{DD}-V_{b2}>|V_{TP}|,\n\\]\n\nand the output must satisfy\n\n\\[\nV_{b1}-V_{TN}\\ \\le V_{out}\\ \\le V_{b2}+|V_{TP}|.\n\\]\n\nWith no DC load, the currents sourced by M1 and sunk by M2 must match:\n\n\\[\nI_{D1}=I_{D2}.\n\\]\n\nFor example, neglecting channel-length modulation,\n\n\\[\n\\frac{\\beta_p}{2}(V_{DD}-V_{b2}-|V_{TP}|)^2\n=\n\\frac{\\beta_n}{2}(V_{b1}-V_{IN,Q}-V_{TN})^2.\n\\]\n\nNumerical bias voltages cannot be found without device and bias values.\n\n### Small-signal behavior\n\nThe bias voltages and \\(V_{DD}\\) are AC ground. M1 therefore acts mainly as its output resistance \\(r_{o1}\\); M2 has its gate at AC ground and receives the signal at its source. With an output load \\(R_L\\),\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}\n\\approx (g_{m2}+g_{mb2})\n\\bigl(r_{o1}\\parallel r_{o2}\\parallel R_L\\bigr),\n\\]\n\nwhere \\(g_{mb2}\\) accounts for body effect; it may be omitted if body effect is neglected. Thus the stage is **non-inverting**: increasing \\(V_{in}\\) reduces M2’s \\(V_{GS}\\) and drain current, so the output rises.\n\nTo first order, the input resistance is about \\(1/(g_{m2}+g_{mb2})\\), and the unloaded output resistance is about \\(r_{o1}\\parallel r_{o2}\\).",
        "format": "markdown",
        "sha256": "d3f0bdcc6b4cce4e9101ab93a9e3b7cfb2d3a6abc40df19793628589ae909a50"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, and gives the non-inverting gain and low input resistance. Its body-effect and load refinements are acceptable.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 16755,
        "total_tokens": 17979,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16233,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 16755,
        "total_tokens": 17979,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16233,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**. With the bias supplies treated as AC ground, the only independent dynamic nodes are the M1 gate and \\(V_{\\text{out}}\\). The capacitors connect to or between these nodes, but do not create additional states.",
        "format": "markdown",
        "sha256": "25b5e95df02f9f35fad4645deeb7aad9b2637cd4b9cd41505a8ecb5bfe9943e6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles from the two independent dynamic nodes: the M1 gate and the output.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 4241,
        "total_tokens": 5695,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4182,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 4241,
        "total_tokens": 5695,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4182,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**. Its only independent dynamic nodes are the gate of \\(M_1\\) and \\(V_{\\text{out}}\\); the bias and supply nodes are at AC ground.",
        "format": "markdown",
        "sha256": "7dcfc0755ead06e8c84787d83a5b9dba408e98b40abeff052756bb7eb43267e0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and the two independent dynamic nodes: the gate of M1 and the output. Bias and supply nodes are at AC ground.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 1082,
        "total_tokens": 2823,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 1082,
        "total_tokens": 2823,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**. Its only independent dynamic node voltages are the M1 gate node and the output node; the other bias and supply nodes are AC grounds. The several capacitors therefore form a second-order network, not one pole per capacitor.",
        "format": "markdown",
        "sha256": "9a7f5e9a1a717403e2638526103d54cb393c2db6897423868b310805fc4edf17"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent dynamic nodes—the M1 gate and output—and concludes the circuit has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 2280,
        "total_tokens": 4021,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2221,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 2280,
        "total_tokens": 4021,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2221,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **resistor-loaded NMOS inverter** with two NMOS transistors in series in the pull-down path. The gates of \\(M_1\\) and \\(M_2\\) are both driven by \\(V_{\\text{in}}\\); electrically, the stacked devices make the pull-down weaker than a single transistor of the same size.\n\nLet \\(x\\) be the node between the transistors and \\(y=V_{\\text{out}}\\).\n\n- **Low \\(V_{\\text{in}}\\):** \\(M_1\\) is off, so there is no DC path to ground. \\(R_D\\) pulls \\(V_{\\text{out}}\\) up to approximately \\(V_{DD}\\). The intermediate node \\(x\\) is not fixed in the ideal off state.\n- **High \\(V_{\\text{in}}\\):** both devices conduct, giving a path \\(V_{DD}\\to R_D\\to M_2\\to M_1\\to\\text{ground}\\). The resulting current lowers \\(V_{\\text{out}}\\). The output is low only if the transistor stack is strong enough relative to \\(R_D\\).\n\nAt DC,\n\\[\nI_D=\\frac{V_{DD}-V_{\\text{out}}}{R_D},\n\\]\nand the same current flows through both transistors. In particular,\n\\[\nV_{GS1}=V_{\\text{in}},\\qquad V_{GS2}=V_{\\text{in}}-x.\n\\]\nThus \\(M_2\\)’s gate overdrive is reduced as \\(x\\) rises; the stack is not simply two independent inverter stages, nor does it require adding two threshold voltages.\n\nFor an idealized estimate, assume identical long-channel NMOS devices with threshold \\(V_T\\), ignore body effect and channel-length modulation, and define\n\\[\n\\beta=\\mu_n C_{\\text{ox}}\\frac WL,\\qquad a=V_{\\text{in}}-V_T.\n\\]\nFor \\(a>0\\), if \\(V_{\\text{out}}\\ge a\\), \\(M_2\\) is saturated and \\(M_1\\) is in triode. Equating their currents gives\n\\[\nx=\\left(1-\\frac{1}{\\sqrt2}\\right)a,\\qquad\nI_D=\\frac{\\beta}{4}a^2,\n\\]\nso\n\\[\nV_{\\text{out}}=V_{DD}-\\frac{\\beta R_D}{4}(V_{\\text{in}}-V_T)^2.\n\\]\nThis expression applies only when its resulting \\(V_{\\text{out}}\\ge a\\).\n\nIf \\(V_{\\text{out}}<a\\), both devices are in triode; the ideal square-law model gives\n\\[\nI_D=\\frac{\\beta}{4}V_{\\text{out}}\\bigl(2a-V_{\\text{out}}\\bigr),\n\\qquad\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}=I_D.\n\\]\nA numerical output voltage requires \\(V_{DD}\\), \\(R_D\\), the transistor sizes and model parameters. In a real circuit, body effect in \\(M_2\\) can further reduce the pull-down current.",
        "format": "markdown",
        "sha256": "8aa4eeb0a0da94362dbca97987587875109a50476982379c7c45dcfb2070f34a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer correctly identifies the common-gate NMOS stack and gives largely sound DC and operating-region analysis, including M1 in triode and M2 in saturation under the stated condition. But it misses the essential conclusion that the stack acts approximately like one NMOS with effective channel length L1 + L2; describing it only as a weaker pull-down does not establish that mechanism.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 15421,
        "total_tokens": 16849,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14735,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 15421,
        "total_tokens": 16849,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14735,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) and \\(M_2\\) are enhancement-mode nMOS transistors and the output is unloaded, this is a **resistor-loaded inverter with two series transistors in its pull-down path**. Let \\(V_X\\) be the junction between the transistors.\n\n- **Low \\(V_{in}\\):** Both transistors are off, so essentially no current flows through \\(R_D\\). The resistor pulls \\(V_{out}\\) up to \\(V_{DD}\\). The intermediate node \\(V_X\\) may be floating.\n- **High \\(V_{in}\\):** The transistors conduct in series, providing a path from \\(V_{DD}\\), through \\(R_D\\) and \\(M_2,M_1\\), to ground. Thus \\(V_{out}\\) falls. The current satisfies\n  \\[\n  \\frac{V_{DD}-V_{out}}{R_D}=I_{D1}=I_{D2}.\n  \\]\n  In an ideal logic model, \\(V_{out}\\) is low; in a real circuit it is generally nonzero.\n\nThe stack’s pull-down is weaker than a single transistor’s: \\(M_2\\)’s source is at \\(V_X\\), so its gate-to-source voltage is \\(V_{GS2}=V_{in}-V_X\\), not simply \\(V_{in}\\). A rough on-resistance estimate is\n\\[\nV_{out}\\approx V_{DD}\\,\n\\frac{R_{\\text{on1}}+R_{\\text{on2}}}\n{R_D+R_{\\text{on1}}+R_{\\text{on2}}}.\n\\]\nThe exact output voltage requires \\(R_D\\), the supply voltage, and the MOSFET parameters. When the input is high, the resistor and transistor stack also draw static current.",
        "format": "markdown",
        "sha256": "0d7b2963c2363961a189ae25a0154e19a990f61e864a4ec956b282bfe6cb1f8e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recognizes a resistor-loaded circuit with two series NMOS devices and notes the upper device’s reduced VGS, but misses the central result: the lower device is in triode and the pair acts approximately as one transistor with a longer effective channel.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 6813,
        "total_tokens": 8241,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 6813,
        "total_tokens": 8241,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(V_X\\) be the node between \\(M_1\\) and \\(M_2\\). The circuit is a resistor-loaded NMOS inverter with two NMOS transistors in series in its pull-down path.\n\n- **Low \\(V_{in}\\):** \\(M_1\\) is off, so there is no path to ground. \\(R_D\\) pulls \\(V_{out}\\) up to approximately \\(V_{DD}\\).\n- **High \\(V_{in}\\):** \\(M_1\\) pulls \\(V_X\\) low enough for \\(M_2\\) to conduct. Current flows from \\(V_{DD}\\) through \\(R_D\\), \\(M_2\\), and \\(M_1\\) to ground, pulling \\(V_{out}\\) low.\n\nAt steady state,\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D},\n\\]\nwith the same current through both transistors. Their gate-source voltages differ:\n\\[\nV_{GS1}=V_{in}, \\qquad V_{GS2}=V_{in}-V_X.\n\\]\nThus, the exact low output voltage depends on the resistor and transistor characteristics; the series stack is a weaker pull-down than a single same-size NMOS. The circuit’s logic is **inverting**: low input gives high output, and high input gives low output.",
        "format": "markdown",
        "sha256": "f164f8cb50e6f4528ce56741c739c1b6c6045b898b1aaa6fcbf2561ce9043ed9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies a resistor-loaded inverter with two series NMOS devices and notes the weaker pull-down, but misses the key result: the common-gate stack acts approximately like one NMOS with an effective channel length equal to the sum of the two lengths, with the lower device in triode and upper device saturated.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 6958,
        "total_tokens": 8386,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6661,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 6958,
        "total_tokens": 8386,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6661,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **source-coupled NMOS current-steering pair** with a single-ended resistive output. Let \\(I_T=I_1\\) and \\(v_d=V_{in}-V_b\\). Assume \\(M_1\\) and \\(M_2\\) are matched and operating in saturation, and the tail current source is ideal.\n\nThe tail current splits between the two transistors:\n\\[\nI_{D1}+I_{D2}=I_T,\n\\qquad\nV_{out}=V_{DD}-R_D I_{D2}.\n\\]\n\nSo, when \\(V_{in}\\) rises relative to \\(V_b\\), \\(M_1\\) takes more of the tail current and \\(M_2\\) takes less. The drop across \\(R_D\\) decreases, so **\\(V_{out}\\) rises**. When \\(V_{in}<V_b\\), \\(M_2\\) takes more current and \\(V_{out}\\) falls.\n\nAt the balanced point \\(V_{in}=V_b\\), matched devices split the current equally:\n\\[\nI_{D1}=I_{D2}=\\frac{I_T}{2},\n\\qquad\nV_{out,Q}=V_{DD}-\\frac{R_D I_T}{2}.\n\\]\n\n### Small-signal gain\n\nAt balance, let \\(g_m\\) be the transconductance of either transistor. For an ideal tail source and large transistor output resistances,\n\\[\n\\delta i_{D2}\\simeq-\\frac{g_m}{2}(\\delta v_{in}-\\delta v_b),\n\\]\nand hence\n\\[\n\\boxed{\\delta v_{out}\\simeq\n\\frac{g_mR_D}{2}(\\delta v_{in}-\\delta v_b)}.\n\\]\nWith \\(V_b\\) held fixed, the gain from \\(V_{in}\\) is positive:\n\\[\nA_v\\simeq+\\frac{g_mR_D}{2}.\n\\]\n\n### Large-signal behavior and limits\n\nIn the ideal square-law model, define \\(\\beta=\\mu_n C_{ox}(W/L)\\) for each matched device and \\(V_{OV,0}=\\sqrt{I_T/\\beta}\\), the overdrive at equal current sharing. While both devices conduct in saturation,\n\\[\nI_{D2}=\\frac{I_T}{2}\\left[\n1-\\frac{v_d}{V_{OV,0}}\n\\sqrt{1-\\left(\\frac{v_d}{2V_{OV,0}}\\right)^2}\n\\right],\n\\qquad |v_d|\\le\\sqrt{2}\\,V_{OV,0}.\n\\]\nFor sufficiently positive \\(v_d\\), \\(M_1\\) takes nearly all the current and \\(V_{out}\\) approaches \\(V_{DD}\\). For sufficiently negative \\(v_d\\), \\(M_2\\) takes nearly all the current and \\(V_{out}\\) approaches \\(V_{DD}-R_DI_T\\).\n\nThese results require adequate voltage headroom. In particular, \\(M_2\\) must remain saturated, approximately \\(V_{out}\\ge V_b-V_T\\), and the tail current source must have sufficient compliance. Finite output resistance, device mismatch, or loss of saturation changes the ideal current split and gain.",
        "format": "markdown",
        "sha256": "71eb9151524c11629016f652700951ff2ab654a707fd3e7e83d29000e54b9d7d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, with M2’s current setting the resistive output, and gives the correct current-steering direction and positive small-signal gain.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 22023,
        "total_tokens": 24318,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21315,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 22023,
        "total_tokens": 24318,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21315,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are matched NMOS devices and \\(I_1\\) is an ideal tail-current sink. This is a source-coupled, current-steering pair with a single-ended output at \\(M_2\\)’s drain. \\(M_1\\)’s drain is tied directly to \\(V_{DD}\\); it does not provide an output.\n\nLet \\(V_S\\) be the common-source voltage. The tail current splits between the transistors:\n\n\\[\nI_{D1}+I_{D2}=I_1,\\qquad\nV_{\\text{out}}=V_{DD}-R_D I_{D2}.\n\\]\n\nThus the input difference \\(\\Delta=V_{\\text{in}}-V_b\\) steers current between the branches. Increasing \\(V_{\\text{in}}\\) increases \\(M_1\\)’s share and decreases \\(M_2\\)’s; the drop across \\(R_D\\) then decreases, so \\(V_{\\text{out}}\\) rises. Increasing \\(V_b\\) has the opposite effect.\n\nFor matched devices at \\(V_{\\text{in}}=V_b\\), assuming both are in saturation,\n\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2},\n\\qquad\nV_{\\text{out,Q}}=V_{DD}-\\frac{R_D I_1}{2}.\n\\]\n\nFor small signals about this balanced point, with \\(V_b\\) fixed,\n\n\\[\n\\delta v_{\\text{out}}\n\\approx \\frac{g_mR_D}{2}\\,\\delta v_{\\text{in}},\n\\]\n\nwhere \\(g_m\\) is the transconductance of either transistor at \\(I_D=I_1/2\\). More generally,\n\n\\[\n\\delta v_{\\text{out}}\n\\approx \\frac{g_mR_D}{2}\n(\\delta v_{\\text{in}}-\\delta v_b).\n\\]\n\nSo the output is non-inverting with respect to \\(V_{\\text{in}}\\) and inverting with respect to \\(V_b\\).\n\nIn the ideal long-channel square-law model, writing \\(I_D=\\frac{\\beta}{2}V_{OV}^2\\), the current in \\(M_2\\), while both devices conduct, is\n\n\\[\nI_{D2}\n=\\frac{I_1}{2}\n-\\frac{\\beta}{4}\\Delta\n\\sqrt{\\frac{4I_1}{\\beta}-\\Delta^2}.\n\\]\n\nFor sufficiently positive \\(\\Delta\\), \\(M_2\\) turns off and \\(V_{\\text{out}}\\) approaches \\(V_{DD}\\); for sufficiently negative \\(\\Delta\\), nearly all of \\(I_1\\) flows through \\(M_2\\), pulling the output down.\n\nThese results require adequate voltage headroom. In particular, \\(M_2\\) is saturated only if \\(V_{\\text{out}}\\gtrsim V_b-V_T\\); if it enters triode, the current-splitting and gain expressions no longer apply.",
        "format": "markdown",
        "sha256": "ae9a3fcf066044737b98a0e16f2de31cbcd25f7997f98b8c1e363cf13538b0b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair, its current steering and output node, and derives the correct non-inverting small-signal gain. The added operating-point and headroom analysis is consistent with the topology.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 16586,
        "total_tokens": 18881,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15926,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 16586,
        "total_tokens": 18881,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15926,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) and \\(M_2\\) are NMOS devices, this is a **source-coupled current-steering stage** with a single-ended output. Let \\(V_S\\) be the shared-source voltage and \\(I_T=I_1\\) the tail current. Assume the output is unloaded.\n\n### DC operation\n\nThe tail current divides between the two transistors:\n\n\\[\nI_{D1}+I_{D2}=I_T,\n\\qquad\nV_{\\text{out}}=V_{DD}-R_D I_{D2}.\n\\]\n\nWhen both devices are on and saturated, a square-law model gives\n\n\\[\nI_{D1}\\simeq \\frac{\\beta_1}{2}(V_{\\text{in}}-V_S-V_{T1})^2,\n\\qquad\nI_{D2}\\simeq \\frac{\\beta_2}{2}(V_b-V_S-V_{T2})^2.\n\\]\n\nThus \\(V_{\\text{in}}\\) steers the fixed tail current. For matched devices, with \\(V_{\\text{in}}=V_b\\), each carries approximately \\(I_T/2\\), so\n\n\\[\nV_{\\text{out,Q}}\\simeq V_{DD}-\\frac{R_D I_T}{2}.\n\\]\n\nIncreasing \\(V_{\\text{in}}\\) makes \\(M_1\\) carry more current and \\(M_2\\) carry less; the voltage drop across \\(R_D\\) decreases, so \\(V_{\\text{out}}\\) rises. The overall signal polarity is therefore **non-inverting**. With strong steering, \\(V_{\\text{out}}\\) approaches \\(V_{DD}\\) when \\(M_2\\) is nearly off, and approaches \\(V_{DD}-R_DI_T\\) when \\(M_2\\) carries nearly all the tail current.\n\n### Small-signal gain\n\nWith \\(V_{DD}\\) and \\(V_b\\) at AC ground, and an ideal tail-current source, the incremental branch currents sum to zero:\n\n\\[\n\\delta i_{D1}=g_{m1}(\\delta v_{\\text{in}}-\\delta v_S),\\qquad\n\\delta i_{D2}=-g_{m2}\\delta v_S,\\qquad\n\\delta i_{D1}+\\delta i_{D2}=0.\n\\]\n\nHence\n\n\\[\n\\delta v_S=\\frac{g_{m1}}{g_{m1}+g_{m2}}\\delta v_{\\text{in}},\n\\]\n\nand, since \\(\\delta v_{\\text{out}}=-R_D\\delta i_{D2}\\),\n\n\\[\n\\boxed{A_v=\\frac{\\delta v_{\\text{out}}}{\\delta v_{\\text{in}}}\n\\simeq R_D\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}}.\n\\]\n\nFor a matched pair at its balanced bias point, \\(g_{m1}=g_{m2}=g_m\\), giving\n\n\\[\n\\boxed{A_v\\simeq+\\frac{g_mR_D}{2}}.\n\\]\n\nThese results assume both MOSFETs remain in saturation and the tail source has adequate compliance. Finite transistor output resistance, body effect, or output loading will modify the gain and swing.",
        "format": "markdown",
        "sha256": "7eb1846c43b78f757d6ddc310c2d24a6638a6af34df9beabfa985a715dac8ea1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the shared-source current-steering topology, with M2 biased by Vb and the single-ended output at its drain. The small-signal derivation and non-inverting gain are also correct.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 27447,
        "total_tokens": 29742,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 27447,
        "total_tokens": 29742,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For an output-impedance measurement, set \\(V_{\\text{in}}\\), \\(V_b\\), and \\(V_{DD}\\) to AC ground. M1 is a source follower. Its gate is connected to AC ground through \\(R_s\\), but its \\(C_{gs}\\) couples the output back to the gate, so the gate is not an ideal AC ground.\n\nLet \\(v_o\\) be a test voltage at the output and \\(v_g\\) the gate voltage. In a simplified model retaining \\(C_{gs}\\),\n\n\\[\n\\frac{v_g}{R_s}+sC_{gs}(v_g-v_o)=0\n\\quad\\Rightarrow\\quad\nv_o-v_g=\\frac{v_o}{1+sR_sC_{gs}}.\n\\]\n\nThe small-signal current drawn by M1 is approximately\n\\[\ni_o=(g_m+sC_{gs})(v_o-v_g),\n\\]\nso\n\\[\nZ_{out,1}\\approx\\frac{1+sR_sC_{gs}}{g_m+sC_{gs}}.\n\\]\n\nPutting \\(s=j\\omega\\),\n\\[\n\\operatorname{Im}Z_{out,1}\n=\\frac{\\omega C_{gs}(g_mR_s-1)}\n{g_m^2+(\\omega C_{gs})^2}.\n\\]\nThus, in this simplified model, \\(g_mR_s>1\\) gives a positive imaginary part—an inductive impedance. At low frequencies it behaves approximately like\n\\[\nZ_{out,1}\\approx \\frac{1}{g_m}\n+j\\omega\\frac{C_{gs}(g_mR_s-1)}{g_m^2}.\n\\]\n\nThe phase-shifted gate motion makes M1’s transconductance current oppose the ordinary capacitive current; if it dominates, the output admittance has negative susceptance, which corresponds to positive reactance. M2 and the other device and load capacitances change the exact condition and frequency range, so the output is not necessarily inductive at all frequencies.",
        "format": "markdown",
        "sha256": "8976f1105070af7d278a2229939af1c2a4ad551c4b5473dc5ba75450e68b62c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower, derives the stated output-impedance expression, and shows that it is inductive when g_mR_s>1. The limiting transition is implicit in the expression, and the caveats about additional parasitics do not undermine the core explanation.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 20210,
        "total_tokens": 21800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19772,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 20210,
        "total_tokens": 21800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19772,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M1 is a source follower. To find its output impedance, set \\(V_{\\text{in}}=0\\) and treat \\(V_{DD}\\) and \\(V_b\\) as AC grounds. The finite \\(R_s\\) means M1’s gate is not held perfectly at AC ground: its intrinsic gate–source capacitance \\(C_{gs}\\) couples the output back to the gate.\n\nUsing a small-signal test voltage \\(v_o\\), the gate-node equation gives\n\\[\n\\frac{v_g}{v_o}=\\frac{sR_sC_{gs}}{1+sR_sC_{gs}},\n\\qquad\nv_o-v_g=\\frac{v_o}{1+sR_sC_{gs}}.\n\\]\nThe transconductance current and the \\(C_{gs}\\) displacement current therefore give M1 an output admittance\n\\[\nY_{M1}(s)\\simeq \\frac{g_m+sC_{gs}}{1+sR_sC_{gs}}.\n\\]\nM2’s finite output resistance, and M1’s other small-signal output conductances, add mainly a real shunt conductance.\n\nAt low frequencies,\n\\[\nY_{M1}(s)\\simeq g_m+sC_{gs}(1-g_mR_s).\n\\]\nThus, if \\(g_mR_s>1\\), the imaginary part of the output **admittance** is negative. Since \\(Z_{\\text{out}}=1/Y_{\\text{out}}\\), this corresponds to a positive imaginary part of the output **impedance**—inductive behavior. Ignoring the added output conductances, the low-frequency approximation is\n\\[\nZ_{\\text{out}}\\simeq \\frac{1}{g_m}\n+j\\omega\\,\\frac{C_{gs}(g_mR_s-1)}{g_m^2}.\n\\]\n\nSo \\(R_s\\), \\(C_{gs}\\), and M1’s transconductance together can synthesize an effective inductance; no physical inductor is required. The effect occurs only over a frequency range and can be altered or masked by other device and load capacitances.",
        "format": "markdown",
        "sha256": "981d1c8a444de2ac5b38194baa02a9856e6e16156bc72f99a1d59e4b4f75cc84"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives its output admittance from the Rs–Cgs feedback path. It gives the right inductive condition (gmRs > 1) and low-frequency inductance; its exact admittance also implies the high-frequency limit Zout → Rs.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 16243,
        "total_tokens": 17833,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15786,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 16243,
        "total_tokens": 17833,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15786,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For small-signal output impedance, set \\(V_{\\text{in}}=0\\) and treat \\(V_{DD}\\) and \\(V_b\\) as AC ground. \\(M_1\\) is a source follower, but its gate is not held at AC ground: \\(R_S\\) and \\(M_1\\)’s gate capacitances let the output signal move the gate.\n\nFor example, with \\(C_{gs}\\) and \\(C_{gd}\\) the gate-node equation gives\n\\[\n\\frac{v_g}{v_o}\n=\\frac{sC_{gs}}{1/R_S+s(C_{gs}+C_{gd})}.\n\\]\nAt frequencies below the gate pole, \\(v_g/v_o\\approx sR_SC_{gs}\\). Thus the gate voltage is approximately proportional to the time derivative of the output voltage.\n\nThe transconductance current of \\(M_1\\) depends on \\(v_o-v_g\\). That gate motion therefore contributes a term \\(-s g_mR_SC_{gs}\\) to the output admittance. Including the ordinary capacitances, a low-frequency approximation is\n\\[\nY_o(s)\\approx G_o+s\\left[C_{\\text{par}}+C_{gs}(1-g_mR_S)\\right],\n\\]\nwhere \\(G_o\\) includes the transistor conductances and \\(C_{\\text{par}}\\) the other output-node capacitances, including those of \\(M_2\\).\n\nIf the bracketed effective capacitance is negative, \\(Y_o\\) has negative susceptance. Since \\(Z_o=1/Y_o\\), the output impedance then has positive imaginary part: the output current lags the voltage, so the impedance is inductive. This can happen when the transconductance–resistance feedback term is large enough to overcome the ordinary capacitances. \\(M_2\\) and other parasitics affect the condition, and the inductive behavior generally occurs only over a frequency band.",
        "format": "markdown",
        "sha256": "f1b31c4ee869123841d2f10ca0c47c62ad933e8a4b62f7e00ca075ade2064fb8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies the source-follower topology and derives how Cgs-mediated gate motion through R_S can make the effective output capacitance negative, yielding inductive output impedance. The qualification for parasitic capacitances is appropriate.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 20068,
        "total_tokens": 21658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 20068,
        "total_tokens": 21658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are nMOS devices, with \\(M_2\\)’s drain at \\(X\\), gate at \\(V_{\\text{out}}\\), and source at ground. Let the node voltages be \\(v_x\\) and \\(v_o\\).\n\n### DC operating point\n\nNeglecting MOS gate current, the input current must be sunk by \\(M_2\\), while the resistor current is sunk by \\(M_1\\):\n\\[\nI_{\\text{in}}=I_{D2}(v_x,v_o),\n\\qquad\n\\frac{V_{DD}-v_o}{R_{D1}}=I_{D1}(v_x,v_o).\n\\]\nThese equations, together with the MOSFET I–V characteristics, determine the bias point; no numerical result is possible without device and component values. For example, if both devices are in saturation and channel-length modulation is neglected,\n\\[\nI_{\\text{in}}\\simeq \\frac{\\beta_2}{2}(v_o-V_{T2})^2,\n\\qquad\n\\frac{V_{DD}-v_o}{R_{D1}}\\simeq \\frac{\\beta_1}{2}(v_x-V_{T1})^2.\n\\]\n\n### Small-signal behavior\n\nAt the bias point, let \\(g_{mi}\\) and \\(g_{oi}=1/r_{oi}\\) be the transconductance and output conductance of \\(M_i\\), and define\n\\[\nG_o=\\frac{1}{R_{D1}}+g_{o1}.\n\\]\nWith \\(V_{DD}\\) treated as AC ground, the small-signal node equations are\n\\[\nG_o v_o+g_{m1}v_x=0,\n\\qquad\ni_{\\text{in}}=g_{o2}v_x+g_{m2}v_o.\n\\]\nThus the voltage gain of the \\(M_1\\) stage is \\(v_o/v_x=-A_1\\), where \\(A_1=g_{m1}/G_o\\), and\n\\[\n\\frac{v_x}{i_{\\text{in}}}\n=\\frac{1}{g_{o2}-g_{m2}A_1},\n\\qquad\n\\frac{v_o}{i_{\\text{in}}}\n=-\\frac{A_1}{g_{o2}-g_{m2}A_1}.\n\\]\n\n### Feedback and stability\n\nThe loop is **positive feedback**: a rise in \\(v_x\\) makes \\(M_1\\) pull \\(v_o\\) down; the lower \\(v_o\\) weakens \\(M_2\\), so \\(v_x\\) rises further for the same input current. The loop factor in this small-signal model is\n\\[\n\\mathcal L=\\frac{g_{m1}g_{m2}}{G_o g_{o2}}.\n\\]\nIf \\(\\mathcal L\\) approaches 1, the incremental gains become very large. For \\(\\mathcal L>1\\), the input resistance is negative and the bias point is regenerative; with ordinary node capacitances, this generally gives an unstable operating point. For example, a two-node RC model has characteristic equation\n\\[\n(sC_x+g_{o2})(sC_o+G_o)-g_{m1}g_{m2}=0,\n\\]\nwhich is stable only if \\(g_{o2}G_o>g_{m1}g_{m2}\\).\n\nSo this is not automatically a well-behaved linear transimpedance amplifier: its behavior depends strongly on the bias point, device output conductances, and loading.",
        "format": "markdown",
        "sha256": "975dc41c20e4f7d5f85a8fa8e5d9a964f1dd712f09c0c0bb8b9949e728900547"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection to Vout and the resulting positive-feedback loop, and derives the loop-gain-modified input resistance. It also correctly notes negative resistance and instability when loop gain exceeds one.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 21690,
        "total_tokens": 23747,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 21690,
        "total_tokens": 23747,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume the wiring makes \\(M_2\\) an nMOS from \\(X\\) to ground, with its gate connected to \\(V_{\\text{out}}\\). Also assume an unloaded output and negligible MOS gate current.\n\nAt DC, the input current flows through \\(M_2\\), while \\(M_1\\) and \\(R_{D1}\\) set the output:\n\n\\[\nI_{\\text{in}}=I_{D2}(V_{GS2}=V_{\\text{out}},\\,V_{DS2}=X),\n\\qquad\n\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}\n=I_{D1}(V_{GS1}=X,\\,V_{DS1}=V_{\\text{out}}).\n\\]\n\nThus the circuit is not a simple linear current-to-voltage converter; its operating point depends on both transistors’ characteristics.\n\n**For small positive \\(I_{\\text{in}}\\):** If \\(X<V_{T1}\\), \\(M_1\\) is off and \\(V_{\\text{out}}\\approx V_{DD}\\). Provided \\(V_{DD}>V_{T2}\\), \\(M_2\\) is on and sinks the input current. In the usual case where \\(M_2\\) is in its triode region,\n\n\\[\nI_{\\text{in}}\\approx\\beta_2\\left[(V_{DD}-V_{T2})X-\\frac{X^2}{2}\\right],\n\\]\n\nso for very small currents,\n\n\\[\nX\\approx\\frac{I_{\\text{in}}}{\\beta_2(V_{DD}-V_{T2})}.\n\\]\n\nHere \\(\\beta_i=\\mu_n C_{\\rm ox}(W/L)_i\\). If \\(V_{T1}<V_{DD}-V_{T2}\\), the current at which \\(M_1\\) just begins to turn on is approximately\n\n\\[\nI_{\\text{in,on}}\n=\\beta_2\\left[(V_{DD}-V_{T2})V_{T1}-\\frac{V_{T1}^2}{2}\\right].\n\\]\n\nThis is the onset of \\(M_1\\) conduction, not necessarily the circuit’s switching current.\n\n**Feedback:** As \\(X\\) rises, \\(M_1\\) conducts more and pulls \\(V_{\\text{out}}\\) down. That reduces \\(M_2\\)’s gate drive, so \\(M_2\\) sinks less current; \\(X\\) then rises further to carry the input current. This is **positive (regenerative) feedback**. Depending on device sizes and \\(R_{D1}\\), it can produce a sharp transition, hysteresis, or an unstable operating point.\n\nIf \\(V_{\\text{out}}\\) falls below \\(V_{T2}\\), \\(M_2\\) turns off. A sustained positive input current then has no ideal DC path and charges the capacitance at \\(X\\); a practical circuit would rely on leakage or another current path. Numerical operating points require \\(V_{DD}\\), \\(R_{D1}\\), and the MOSFET parameters.",
        "format": "markdown",
        "sha256": "d3367a30751727a829a56cf91762993b8fa02af37ba22d33d54d461c6be84023"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection to Vout and the positive-feedback loop, and notes instability as a possible consequence. This meets the golden solution’s full-credit rule; a precise input-resistance formula is not required.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 28600,
        "total_tokens": 30657,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 28600,
        "total_tokens": 30657,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are NMOS devices with their sources grounded. As drawn, \\(M_1\\)’s gate is at \\(X\\), while \\(M_2\\)’s drain is at \\(X\\) and its gate is at \\(V_{\\text{out}}\\). Let \\(V_X\\) denote the voltage at node \\(X\\).\n\n### DC equations\n\nIgnoring MOS gate current and assuming no load at the output, KCL gives\n\n\\[\nI_{\\text{in}}=I_{D2}(V_{\\text{out}},V_X),\n\\qquad\n\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}\n=I_{D1}(V_X,V_{\\text{out}}).\n\\]\n\nThus the input current is sunk through \\(M_2\\); it does **not** flow through \\(R_{D1}\\). The two equations must be solved together for \\(V_X\\) and \\(V_{\\text{out}}\\).\n\nFor example, with a long-channel square-law model and both transistors in saturation,\n\n\\[\nI_{\\text{in}}=\\frac{\\beta_2}{2}(V_{\\text{out}}-V_{T2})^2,\n\\qquad\n\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}\n=\\frac{\\beta_1}{2}(V_X-V_{T1})^2,\n\\]\n\nso a candidate operating point is\n\n\\[\nV_{\\text{out}}=V_{T2}+\\sqrt{\\frac{2I_{\\text{in}}}{\\beta_2}},\n\\qquad\nV_X=V_{T1}+\n\\sqrt{\\frac{2(V_{DD}-V_{\\text{out}})}{\\beta_1R_{D1}}}.\n\\]\n\nThese expressions apply only if the saturation conditions hold; otherwise the appropriate triode-region equations are needed. No numerical operating point can be found without device and supply values.\n\n### Feedback behavior\n\nThe circuit has **positive feedback**:\n\n- If \\(V_X\\) rises, \\(M_1\\) draws more current and pulls \\(V_{\\text{out}}\\) down.\n- A lower \\(V_{\\text{out}}\\) weakens \\(M_2\\), so it sinks less current. With \\(I_{\\text{in}}\\) fixed, \\(V_X\\) then rises further.\n\nAt small input current, \\(M_1\\) may be off and \\(V_{\\text{out}}\\) near \\(V_{DD}\\), while \\(M_2\\) sinks the input current. As \\(V_X\\) rises enough to turn on \\(M_1\\), the feedback can cause a sharp output change. Depending on the transistor parameters and bias, the circuit may show an abrupt transition, hysteresis, or an unstable operating point. In the ideal cutoff model, if \\(M_2\\) turns off, there is no DC path for \\(I_{\\text{in}}\\), so \\(X\\) continues to charge rather than settling.",
        "format": "markdown",
        "sha256": "e3ff7fbdc96bb1eb5e3cbdf7f2059eaec7fe978903410c2f76189687a548e0f6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2’s gate is tied to Vout, explains the positive-feedback loop, and notes instability or abrupt/hysteretic behavior. The DC equations and possible low-X state are also consistent with the topology; a precise input-resistance formula is not required.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 26995,
        "total_tokens": 29052,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 26995,
        "total_tokens": 29052,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_s\\) denote the small-signal voltage at the source of \\(M_1\\), \\(v_x\\) the voltage at node \\(X\\), and \\(v_o\\) the output signal. Treat \\(V_{DD}\\) and \\(V_b\\) as AC ground, and assume both MOSFETs are in saturation. First take \\(r_o\\to\\infty\\), neglect body effect, and assume no external output load.\n\n**Operation and feedback.** \\(M_1\\) is a common-gate stage and \\(M_2\\) is a common-source stage. A rise in \\(v_s\\) reduces \\(M_1\\)’s \\(V_{GS}\\), making \\(v_x\\) rise; this turns \\(M_2\\) on harder and makes \\(v_o\\) fall. The resulting current through \\(R_F\\) opposes the initial rise in \\(v_s\\), so the feedback is negative. The circuit is a current-to-voltage (transimpedance) amplifier.\n\nThe small-signal equations are\n\\[\n\\frac{v_x}{R_{D1}}-g_{m1}v_s=0,\n\\qquad\n\\frac{v_o}{R_{D2}}+g_{m2}v_x+\\frac{v_o-v_s}{R_F}=0,\n\\]\nand the input-node current balance is\n\\[\nI_{\\rm in}=g_{m1}v_s+\\frac{v_s-v_o}{R_F}.\n\\]\n\nDefine the open-loop voltage-gain magnitude\n\\[\nA=g_{m1}R_{D1}\\,g_{m2}R_{D2}.\n\\]\nSolving the equations, including the loading of the output by \\(R_F\\), gives\n\\[\n\\boxed{\\frac{v_o}{I_{\\rm in}}\n=\\frac{R_{D2}-R_FA}\n{1+A+g_{m1}(R_F+R_{D2})}}\n\\]\nfor this idealized small-signal model. A positive input current therefore normally produces a negative output signal.\n\nWhen the loop gain is sufficiently large, the input node is held near AC ground and most of the input current flows through \\(R_F\\). Then\n\\[\n\\boxed{v_o\\approx -\\,I_{\\rm in}R_F}.\n\\]\nWith the arrow shown for \\(i_{\\rm RF}\\), positive \\(I_{\\rm in}\\) makes \\(i_{\\rm RF}\\approx-I_{\\rm in}\\).\n\nThese are incremental results about a bias point. The drawing alone does not provide enough device or component data to determine that bias point or the output swing; both transistors must remain in their intended operating region. Finite transistor output resistance, body effect, or an external output load will modify the finite-gain expression.",
        "format": "markdown",
        "sha256": "ce3a2b296c8fd84328825bc6e3ce2da59cc236b8aca3152a7c3329dd40229489"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate M1 input, the X-driven common-source M2 stage, and RF feedback from output to input as a negative-feedback transimpedance amplifier. The small-signal equations and high-loop-gain result, vout/Iin ≈ −RF, are consistent with the stated assumptions.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 25742,
        "total_tokens": 28020,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25145,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 25742,
        "total_tokens": 28020,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25145,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are NMOS devices in saturation, and use a low-frequency small-signal model that neglects their output resistances. Let \\(v_s\\) be the input/source node of \\(M_1\\), \\(v_x\\) node \\(X\\), and \\(v_o\\) the output. For small signals, \\(V_{DD}\\) and \\(V_b\\) are AC ground.\n\n\\(M_1\\) is a common-gate stage and \\(M_2\\) is a common-source stage. Their combined voltage gain from \\(v_s\\) to \\(v_o\\) is inverting, so \\(R_F\\) provides negative feedback. Define \\(i_{\\rm RF}\\) positive in the arrow’s direction—from output to input—so\n\\[\ni_{\\rm RF}=\\frac{v_o-v_s}{R_F}.\n\\]\n\nThe small-signal node equations are\n\\[\n\\frac{v_x}{R_{D1}}-g_{m1}v_s=0,\n\\qquad\nI_{\\rm in}+i_{\\rm RF}=g_{m1}v_s,\n\\qquad\n\\frac{v_o}{R_{D2}}+g_{m2}v_x+i_{\\rm RF}=0.\n\\]\nThe first gives \\(v_x=g_{m1}R_{D1}v_s\\). Define\n\\[\nA_0=g_{m1}R_{D1}\\,g_{m2}R_{D2},\n\\qquad\nD=1+A_0+g_{m1}(R_F+R_{D2}).\n\\]\nSolving the equations gives\n\\[\n\\boxed{\\frac{v_o}{I_{\\rm in}}=\\frac{R_{D2}-A_0R_F}{D}},\n\\qquad\n\\boxed{\\frac{v_s}{I_{\\rm in}}=\\frac{R_F+R_{D2}}{D}},\n\\qquad\n\\boxed{\\frac{i_{\\rm RF}}{I_{\\rm in}}=-\\frac{1+A_0}{D}}.\n\\]\n\nThus, with sufficiently high loop gain, \\(v_s\\) is nearly an AC virtual ground and\n\\[\n\\boxed{v_o\\simeq -R_F I_{\\rm in}},\\qquad i_{\\rm RF}\\simeq-I_{\\rm in}.\n\\]\nThe negative sign on \\(i_{\\rm RF}\\) is relative to the arrow shown: the actual feedback current then flows from the input node toward the output. The input resistance is \\(v_s/I_{\\rm in}=(R_F+R_{D2})/D\\), which is reduced by the feedback.\n\nThese are small-signal results; the absolute DC output depends on the bias point. A numerical operating point or gain cannot be found without resistor values and transistor parameters, and the formulas require both MOSFETs to remain in saturation.",
        "format": "markdown",
        "sha256": "2e4112452425ed35fa6ea171ee3cfefdc152cf054c538586d3488b43362af96e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from output to input. The resulting transimpedance and reduced input resistance are also correctly derived.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 27535,
        "total_tokens": 29813,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26907,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 27535,
        "total_tokens": 29813,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26907,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **two-stage transimpedance amplifier with shunt–shunt negative feedback**. \\(M_1\\) is a common-gate input stage, and \\(M_2\\) is a common-source stage. The resistor \\(R_F\\) feeds the output voltage back to the input-current node.\n\nAssume both MOSFETs are in saturation, \\(V_{DD}\\) and \\(V_b\\) are AC grounds, and initially neglect transistor output resistance, capacitances, and any extra output load. Let \\(v_s\\) be the small-signal voltage at the input node, \\(v_x\\) the voltage at \\(X\\), and \\(v_o\\) the output variation. Then\n\\[\nv_x=g_{m1}R_{D1}v_s,\n\\]\nand the node equations are\n\\[\n\\frac{v_o}{R_{D2}}+g_{m2}v_x+\\frac{v_o-v_s}{R_F}=0,\n\\qquad\ni_{\\rm in}=g_{m1}v_s+\\frac{v_s-v_o}{R_F}.\n\\]\n\nSolving, with \\(p=g_{m1}g_{m2}R_{D1}\\),\n\\[\n\\boxed{\\frac{v_o}{i_{\\rm in}}\n=\\frac{1-pR_F}\n{g_{m1}\\!\\left(1+R_F/R_{D2}\\right)+1/R_{D2}+p}}\n\\]\nfor this low-frequency model. The expression retains the loading of the output by \\(R_F\\).\n\nThe overall signal path is inverting: a positive input-current variation raises \\(v_s\\), raises \\(v_x\\), increases \\(M_2\\)'s drain current, and lowers \\(v_o\\). With sufficiently high loop gain, the input node is held near AC ground and nearly all the input current is balanced by the feedback current. Thus the usual design result is\n\\[\n\\boxed{v_o\\approx -\\,i_{\\rm in}R_F.}\n\\]\nThe minus sign means the output moves downward from its quiescent value for the input-current direction shown.\n\nThe bias values and MOSFET parameters are not given, so the quiescent voltages and currents cannot be determined numerically; the result also assumes the devices remain in saturation and the output does not hit a rail.",
        "format": "markdown",
        "sha256": "283176466cd8fa159aed90050b7bfe04a5bb24b648a21392167ac2a9fa079b6c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate input stage, common-source second stage, and output-to-input negative feedback, and gives the expected high-loop-gain transimpedance of approximately −RF.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 34528,
        "total_tokens": 36806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34025,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 34528,
        "total_tokens": 36806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34025,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(X\\) be the node joining M1’s source, M2’s drain, and the two lower current sources. Call the unlabeled downward current sink \\(I_0\\). Assume the current sources are ideal, \\(V_b\\) is fixed, and the output is unloaded.\n\nAt \\(V_{\\text{out}}\\), the current \\(I_1\\) must flow through M1, so \\(I_{D1}=I_1\\). At node \\(X\\),\n\n\\[\nI_0=I_{\\text{in}}+I_{D1}+I_{D2},\n\\qquad\n\\boxed{I_{D2}=I_0-I_1-I_{\\text{in}}}.\n\\]\n\nM2 is a pMOS whose gate is tied to \\(V_{\\text{out}}\\). Raising \\(V_{\\text{out}}\\) reduces its current. Thus, a positive \\(I_{\\text{in}}\\) (in the direction shown) reduces the current required from M2 and makes \\(V_{\\text{out}}\\) rise. The circuit acts as a current-to-voltage converter.\n\nFor long-channel MOSFETs in saturation, ignoring channel-length modulation and body effect,\n\n\\[\nI_{D2}\\simeq \\frac{\\beta_p}{2}\n\\left(V_{DD}-V_{\\text{out}}-|V_{TP}|\\right)^2,\n\\]\n\nso\n\n\\[\n\\boxed{\nV_{\\text{out}}\\simeq\nV_{DD}-|V_{TP}|\n-\\sqrt{\\frac{2\\left(I_0-I_1-I_{\\text{in}}\\right)}{\\beta_p}}\n}\n\\]\n\nwhere \\(\\beta_p=\\mu_p C_{\\text{ox}}(W/L)_2\\). This applies while M2 is on and saturated, and requires \\(I_0-I_1-I_{\\text{in}}\\ge 0\\).\n\nM1’s fixed gate bias and current \\(I_1\\) set the approximate voltage at \\(X\\):\n\n\\[\nV_X\\simeq V_b-V_{TN}-\\sqrt{\\frac{2I_1}{\\beta_n}}.\n\\]\n\nThe MOSFETs and current sources must also have enough voltage headroom to remain in their intended operating regions. If \\(I_{\\text{in}}\\) is too large, M2 approaches cutoff; for sufficiently large excursions in either direction, the output leaves its valid range.\n\nAround a bias point, the small-signal transimpedance is approximately\n\n\\[\n\\boxed{\\frac{\\Delta V_{\\text{out}}}{\\Delta I_{\\text{in}}}\\simeq\n\\frac{1}{g_{m2}}}\n\\]\n\nwith positive polarity. A numerical \\(V_{\\text{out}}\\) cannot be determined without \\(I_0\\) and the transistor parameters.",
        "format": "markdown",
        "sha256": "c8ff57b094d4e2e29f65216d0c286b28ff911f2762a8ef4c61dcea052bd7dd1b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the fixed-gate NMOS input path and the PMOS controlled by Vout, explains how M2 feeds current back to the input node, and derives the positive transimpedance of approximately 1/gm2. This satisfies the golden solution’s full-credit rule through the current-to-voltage/transimpedance interpretation.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 25978,
        "total_tokens": 28145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25380,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 25978,
        "total_tokens": 28145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25380,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_x\\) be the junction of M1, M2, \\(I_{\\rm in}\\), and the lower current sink. Call the unlabeled sink current \\(I_0\\). Taking M1 as the nMOS and M2 as the pMOS, and assuming ideal current sources with no output load:\n\nAt \\(V_{\\rm out}\\), the current source \\(I_1\\) feeds M1, so\n\\[\nI_{D1}=I_1.\n\\]\nAt \\(v_x\\), KCL gives\n\\[\nI_0=I_{\\rm in}+I_{D1}+I_{D2},\n\\qquad\nI_{D2}=I_0-I_1-I_{\\rm in}.\n\\]\nThus an increase in the upward input current requires M2 to supply less current.\n\nFor saturated MOSFETs using the square-law model, let\n\\(\\beta_n=\\mu_n C_{\\rm ox}(W/L)_1\\) and\n\\(\\beta_p=\\mu_p C_{\\rm ox}(W/L)_2\\). M1 sets the approximate input-node bias:\n\\[\nv_x \\simeq V_b-V_{TN}-\\sqrt{\\frac{2I_1}{\\beta_n}}.\n\\]\nM2’s current is\n\\[\nI_{D2}=\\frac{\\beta_p}{2}\n\\left(V_{DD}-V_{\\rm out}-|V_{TP}|\\right)^2,\n\\]\nso\n\\[\n\\boxed{\nV_{\\rm out}\\simeq V_{DD}-|V_{TP}|\n-\\sqrt{\\frac{2\\left(I_0-I_1-I_{\\rm in}\\right)}{\\beta_p}}\n}.\n\\]\n\nFor small signals about a bias point, M1 and the ideal \\(I_1\\) source hold the M1 current fixed. Since increasing \\(V_{\\rm out}\\) reduces the pMOS current,\n\\[\n\\boxed{\\frac{\\Delta V_{\\rm out}}{\\Delta I_{\\rm in}}\n\\simeq \\frac{1}{g_{m2}}>0},\n\\]\nwhere \\(g_{m2}=\\beta_p(V_{DD}-V_{\\rm out}-|V_{TP}|)\\). The circuit therefore acts as a **non-inverting current-to-voltage converter**: positive input current raises \\(V_{\\rm out}\\).\n\nThis operating-point result requires \\(I_0-I_1-I_{\\rm in}>0\\) and both transistors to remain in their intended operating regions; outside that range the simple transfer relation no longer applies.",
        "format": "markdown",
        "sha256": "df4abec15ddd4c250154a60168dbc642e813ff5b7a66616fabdbdaaa147a6e0b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The device polarities, current balance, and positive transimpedance \u001b[?]vout/iin\u001b[?] ≈ 1/gm2 are correct under the stated assumptions. However, it does not clearly explain the common-gate feedback path or establish the key very low input resistance, so the analysis is incomplete.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 27994,
        "total_tokens": 30161,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27452,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 27994,
        "total_tokens": 30161,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27452,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_x\\) be the node joining the source of \\(M_1\\), drain of \\(M_2\\), and the two lower current sources. Call the unlabelled downward current \\(I_0\\). Assume the output is unloaded and the current sources are ideal.\n\nAt \\(V_{\\text{out}}\\), \\(M_2\\)’s gate draws essentially no current, so all of \\(I_1\\) flows through \\(M_1\\):\n\n\\[\nI_{D1}=I_1.\n\\]\n\nAt \\(v_x\\), current balance gives\n\n\\[\nI_{\\text{in}}+I_{D1}+I_{D2}=I_0,\n\\qquad\nI_{D2}=I_0-I_1-I_{\\text{in}},\n\\]\n\nwhere \\(I_{D2}\\) is the current supplied by the pMOS \\(M_2\\) from \\(V_{DD}\\) into \\(v_x\\).\n\nFor long-channel MOSFETs in saturation, neglecting channel-length modulation, \\(M_1\\) sets the common-node voltage approximately to\n\n\\[\nv_x \\simeq V_b-V_{TN}-\\sqrt{\\frac{2I_1}{\\beta_n}},\n\\]\n\nwith \\(\\beta_n=\\mu_n C_{\\rm ox}(W/L)_1\\). For \\(M_2\\),\n\n\\[\nI_{D2}\\simeq \\frac{\\beta_p}{2}\n\\left(V_{DD}-V_{\\text{out}}-|V_{TP}|\\right)^2.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nV_{\\text{out}}\\simeq V_{DD}-|V_{TP}|\n-\\sqrt{\\frac{2\\left(I_0-I_1-I_{\\text{in}}\\right)}{\\beta_p}}\n}\n\\]\n\nwhere \\(\\beta_p=\\mu_p C_{\\rm ox}(W/L)_2\\).\n\nThus, increasing the upward input current reduces the current required from \\(M_2\\), so \\(M_2\\) turns down and \\(V_{\\text{out}}\\) rises. In this model the small-signal current-to-voltage gain is\n\n\\[\n\\frac{dV_{\\text{out}}}{dI_{\\text{in}}}\n=\\frac{1}{g_{m2}}>0.\n\\]\n\nThe formula requires \\(I_0-I_1-I_{\\text{in}}\\ge 0\\) and sufficient voltage headroom for both transistors to remain in saturation. As \\(I_{\\text{in}}\\) approaches \\(I_0-I_1\\), \\(M_2\\) approaches cutoff and \\(V_{\\text{out}}\\) approaches \\(V_{DD}-|V_{TP}|\\). No numerical output can be found without the value of \\(I_0\\) and the transistor parameters.",
        "format": "markdown",
        "sha256": "d3c736fb8e0a844afaf05eda2366fc1c3d40044064a4e0cf9a68e6b48671a767"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The device types, current balance, output polarity, and transimpedance gain of approximately +1/gm2 are correct. However, it does not explicitly identify the feedback loop or state the key very-low-input-resistance behavior, so it misses an important part of the analysis.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 27305,
        "total_tokens": 29472,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26703,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 27305,
        "total_tokens": 29472,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26703,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not for any **finite** capacitance in the idealized ring oscillator. Each inverter must move charge \\(Q=C_L\\Delta V\\), so its delay grows roughly as \\(R_{\\text{out}}C_L\\) (or \\(C_L\\Delta V/I_{\\text{drive}}\\)). The period therefore grows and the frequency falls approximately as \\(1/C_L\\).\n\nAs \\(C_L\\to\\infty\\), the period tends to infinity, so at the exact infinite-capacitance limit there is no finite-frequency oscillation. In a real circuit, leakage and limited drive can make it effectively stop oscillating at a sufficiently large load.",
        "format": "markdown",
        "sha256": "d03b8606aa9e8414a058fefb46117f43dcf07229b8025aef1fe322d96d154dfa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that for every finite load the ring continues oscillating at a lower frequency, supported by the valid RC/charge-delay argument. The infinite-capacitance limit and practical caveat do not undermine the central conclusion.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 4221,
        "total_tokens": 6418,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 4221,
        "total_tokens": 6418,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For **any finite, sufficiently well-driven load capacitance**, the ring can still oscillate; the capacitors mainly increase the inverters’ propagation delays. A rough estimate is\n\\[\nT \\approx 2\\sum_{i=1}^{3} t_{pd,i},\n\\]\nso for similar stages the frequency falls roughly as \\(1/C_L\\).\n\nIn the **strict limit** \\(C_L\\to\\infty\\), each output swing requires unbounded charge, \\(Q=C_L\\Delta V\\). With finite drive current, the transition time diverges, so the oscillation frequency tends to zero: there is no finite-frequency oscillation at that limit. A real circuit may stop oscillating at some finite capacitance because of leakage or drive limitations, but the figure alone doesn’t determine a cutoff.",
        "format": "markdown",
        "sha256": "f34f6beb66f84786202047f2259000f5f291fd531e552222a0824579391831ba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the required conclusion for arbitrarily large finite capacitances and supports it with the delay argument and the approximate 1/CL frequency trend. The zero-frequency statement is a compatible clarification for the literal infinite-capacitance limit.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 5162,
        "total_tokens": 7359,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4989,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 5162,
        "total_tokens": 7359,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4989,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not for any **finite** capacitance, assuming the inverters have enough gain to oscillate. A larger \\(C_L\\) takes longer to charge and discharge: roughly, \\(t_p\\sim R_{\\text{out}}C_L\\). Thus the three-stage ring runs more slowly, with \\(f\\approx 1/(6t_p)\\), rather than having a finite capacitance limit at which it must stop.\n\nIn the limit \\(C_L\\to\\infty\\), the period tends to infinity and the frequency tends to zero. An *exactly* infinite capacitance would prevent the node voltages from changing under finite drive current, so it would not oscillate. In a real circuit, very large finite capacitors can also make oscillation impractically slow or unreliable because of leakage and other nonidealities.",
        "format": "markdown",
        "sha256": "3b7e4b1f3293383377e1a0f0e6013f0244862d1bd780be280261c6e0ff0ef401"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that every finite increase in the three loads slows the ring rather than causing it to stop, and supports this with the delay argument. The infinite-capacitance limit and practical caveats do not undermine the essential answer.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 5718,
        "total_tokens": 7915,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5542,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 5718,
        "total_tokens": 7915,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5542,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If the load capacitances dominate, doubling them roughly doubles each inverter’s delay, so the ring’s period doubles and its oscillation frequency halves.\n\nThe phase-noise change depends on the noise model. With unchanged inverter noise and swing, a common white-noise model gives \\(S_\\phi \\propto 1/C_L^2\\), so the phase noise at a fixed offset is about **6 dB lower**. But the slower edges can increase absolute timing jitter, and flicker or supply noise may scale differently. The schematic alone doesn’t determine an exact phase-noise change.",
        "format": "markdown",
        "sha256": "cdf5c1a7f7c2e06a8fae24866cd9f286de4c628c691d4b90eab7a699a93ebf58"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the load capacitances approximately halves the oscillation frequency and lowers white-noise phase noise by about 6 dB at a fixed offset; the caveats do not undermine the central result.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 15815,
        "total_tokens": 18009,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15690,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 15815,
        "total_tokens": 18009,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15690,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling all three load capacitors roughly doubles each inverter’s delay, so the ring’s oscillation frequency falls by about half.\n\nIn a simple phase-noise model with unchanged bias, swing, and device noise, the charge swing \\(C_LV_{\\text{swing}}\\) doubles. The resulting close-in phase-noise level is about **6 dB lower at the same offset in Hz** (one quarter the noise power). The exact change depends on the inverter noise and edge slew; at the same offset relative to the carrier, the idealized change is roughly zero.",
        "format": "markdown",
        "sha256": "c3021802b1561e280e1c7de17fb65d358331148b2933f8c560e1b39ef71d970b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors roughly halves the oscillation frequency and lowers phase noise by about 6 dB at a fixed offset; it also correctly notes the unchanged result at a fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 12223,
        "total_tokens": 14417,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12101,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 12223,
        "total_tokens": 14417,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12101,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling each load capacitance roughly doubles the inverter delay, so the ring’s oscillation frequency falls to about half, assuming the loads dominate the delay.\n\nFor a common fixed-bias, white-noise model, the phase noise at the **same offset in hertz** improves by about **6 dB**: the switching charge \\(C_LV\\) doubles, reducing phase sensitivity to a given noise charge by half. This isn’t universal, though—the schematic alone doesn’t specify the noise or bias conditions. At the same *fractional* offset from the new, lower carrier, the idealized phase-noise change is roughly zero.",
        "format": "markdown",
        "sha256": "8e874d802a8c02cec6dabcf79be4ef38f5d498d0f30e1291b63d3594d7f7c2ad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling the capacitors roughly halves the oscillation frequency and yields about a 6 dB phase-noise improvement at a fixed offset, with no change at a fixed fractional offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 13449,
        "total_tokens": 15643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13313,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 13449,
        "total_tokens": 15643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13313,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For a **real inverter circuit**, yes—sufficiently large \\(C_L\\) can stop oscillation, not merely slow it. The load makes the first inverter’s output time constant roughly \\(\\tau_1 \\sim R_{\\text{out}}C_L\\). At the frequency needed for the loop’s phase shift, that heavily loaded stage eventually attenuates the signal so much that the loop no longer has enough gain to sustain oscillation; the circuit can settle to a nonoscillating operating point.\n\nIn an idealized logic-gate model that assumes every finite load still produces a full transition, the answer is different: any finite \\(C_L\\) just lengthens the period, while an infinite capacitance freezes the node. The figure alone doesn’t specify the inverter characteristics, so it can’t determine the actual load at which oscillation stops.",
        "format": "markdown",
        "sha256": "e0eb70ce7732e0325d88447b0ecba7755c5ffea39c89576a6bef7013e069e823"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large CL can stop oscillation and explains that the heavily loaded node creates a dominant pole, reducing loop gain until oscillation cannot be sustained. The modeling caveat does not undermine the essential answer.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 15201,
        "total_tokens": 17253,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 15201,
        "total_tokens": 17253,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends on the inverter model.\n\nIn a simple propagation-delay model, a finite \\(C_L\\) just increases the loaded inverter’s delay (roughly \\(t\\sim R_{\\text{out}}C_L\\)). The ring then oscillates more slowly, with frequency tending toward zero as \\(C_L\\to\\infty\\). At an actually infinite load, a finite-current output cannot make the node change in any finite time, so there is no finite-frequency oscillation.\n\nReal inverters have finite gain and bandwidth, so a sufficiently large **finite** load can also stop oscillation: the loop may settle near a static analog operating point instead. Whether that happens, and at what \\(C_L\\), depends on the inverter characteristics—not just the diagram.",
        "format": "markdown",
        "sha256": "6754ba1b1fba944e6ff68526a882dee7e8f2f15a55b685d99149da0e3ec08bd5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies that sufficiently large finite loading can stop oscillation in a real finite-bandwidth inverter loop and that the circuit may settle at a static operating point. The idealized delay-model discussion is explicitly qualified and does not overturn that conclusion.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 12591,
        "total_tokens": 14643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 12591,
        "total_tokens": 14643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**For a real CMOS circuit, yes: a sufficiently large finite \\(C_L\\) can stop the oscillation.** The load creates a slow output pole, roughly \\(\\tau_L \\approx R_{\\text{out}}C_L\\). At large enough \\(\\tau_L\\), the loop may no longer have enough gain at a frequency with the required phase shift, so the circuit settles to a DC analog operating point. The figure alone doesn’t specify the inverter parameters needed to find the load limit.\n\nIn an **ideal pure-delay model**, by contrast, any finite \\(C_L\\) merely increases the delay and lowers the frequency; only \\(C_L=\\infty\\) freezes the node outright. So “it just gets slower” is an idealization, not a guarantee for a physical circuit.",
        "format": "markdown",
        "sha256": "bc910d80c47cf8482ef7834f9e6f95d6bcbd70736290b642c1c0bc87e24ecf3d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says a sufficiently large one-node load can stop oscillation, explaining the dominant output pole and resulting loss of loop gain at the required phase. The ideal pure-delay caveat is secondary and does not undermine the answer for a real CMOS circuit.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 20370,
        "total_tokens": 22422,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 20370,
        "total_tokens": 22422,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The phase noise should generally **improve** (decrease). With supply voltage and channel length fixed, doubling the widths increases device area and drive current; in this three-stage ring, the node capacitances also increase, so the oscillation frequency may stay roughly similar in an ideal scaling. The larger stored signal energy makes device-noise perturbations smaller relative to the oscillation. A simple noise-limited estimate is about **3 dB lower phase noise**, at roughly twice the dynamic power.\n\nThat 3 dB is only a first-order estimate: added parasitic capacitance and any frequency or slew-rate changes can alter the actual result.",
        "format": "markdown",
        "sha256": "8ee74399fe607d7647b13ab42133777d1de188e349c44c09ddfd7efda211c5f1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives an approximately 3 dB phase-noise reduction and a sound scaling explanation. The caveat about nonideal effects does not undermine the essential answer.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3327,
        "output_tokens": 6862,
        "total_tokens": 10189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6727,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3327,
        "output_tokens": 6862,
        "total_tokens": 10189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6727,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The phase noise will generally decrease (improve), assuming the supply voltage is unchanged and the oscillator can draw more current. Doubling the widths increases drive strength and device area, reducing relative timing jitter. Ideally, the stage delay stays roughly similar because both drive current and load capacitance increase, while the oscillator’s power roughly doubles; thermal-noise-limited phase noise could improve by about 3 dB.\n\nThat is only a rough expectation: added capacitance, external loading, supply noise, or a fixed-power/current constraint can offset the improvement. The schematic alone doesn’t determine the exact change.",
        "format": "markdown",
        "sha256": "b2a673d8a044025e43668379d6da04ce0bc01e8af6f26a69cca6346022b490d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the expected roughly 3 dB phase-noise reduction and correctly notes that drive current and capacitance both scale with width while power roughly doubles. The caveats are overcautious but do not overturn the main answer.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 5304,
        "total_tokens": 8631,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 5304,
        "total_tokens": 8631,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Phase noise will generally improve (become lower). With the supply and channel lengths unchanged, doubling all widths roughly doubles drive current and node capacitance, so the ring’s delay and frequency may stay about the same while its dynamic power roughly doubles. The larger devices have lower equivalent input-referred noise; in a simple device-noise-limited model, phase-noise power scales approximately as \\(1/W\\), so doubling width gives about a **3 dB reduction**.\n\nThat’s an estimate, not a guaranteed result: fixed loads, bias or power limits, parasitics, and supply noise can change the outcome.",
        "format": "markdown",
        "sha256": "b54e1867b31888e1195baab48e03263d5af1d6e7ccd39873ff5b3b3ded3c3443"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives an approximately 3 dB reduction and notes that doubled current and node capacitance leave the frequency roughly unchanged. Its noise-scaling explanation is consistent with the result; the caveats do not change the conclusion.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 7381,
        "total_tokens": 10708,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 7381,
        "total_tokens": 10708,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The logic-level diagram does not specify the inverters’ supply-current behavior, so it is not enough to find a finite small-signal resistance.\n\nFor **ideal static CMOS**, there is no DC path from \\(V_{DD}\\) to ground, so\n\\[\ng_X=\\frac{\\partial I_{DD}}{\\partial V_{DD}}=0,\n\\qquad R_X=\\frac{1}{g_X}\\to\\infty.\n\\]\nIn a real, oscillating circuit, switching and leakage currents make the supply impedance finite and frequency-dependent; finding it requires a transistor-level model and operating conditions.",
        "format": "markdown",
        "sha256": "53b05a51a8e52ad75bd499be6a1743ff64c6b88c3e35f8c023ce299ddf79301f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It notes that switching makes the oscillating circuit draw supply current, but misses the dominant mechanism: charging and discharging the node capacitances. The static-CMOS infinite-resistance argument does not answer the oscillating-circuit question.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3147,
        "output_tokens": 8492,
        "total_tokens": 11639,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8361,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3147,
        "output_tokens": 8492,
        "total_tokens": 11639,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8361,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If each inverter is modeled by the same small-signal supply resistance \\(r_{\\text{inv}}\\), the three supply branches are in parallel:\n\n\\[\nR_X=r_{\\text{inv}}\\parallel r_{\\text{inv}}\\parallel r_{\\text{inv}}\n=\\frac{r_{\\text{inv}}}{3}.\n\\]\n\nThe figure gives no device parameters or operating point, so it does not determine a numerical value for \\(r_{\\text{inv}}\\). In a real ring oscillator, the supply impedance also depends on the switching state and frequency; the \\(r_{\\text{inv}}/3\\) result is the simple identical-stage approximation.",
        "format": "markdown",
        "sha256": "69ddf163f3e1df705ecd7374c58980d62bf34a393dddd514be38f6dd88ace617"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the three inverter stages and notes switching may matter, but its parallel static-resistance estimate misses the dominant oscillation-driven charging and discharging of the load capacitances. The expected resistance is approximately 1/(3 f0 CL), with possible refinement for frequency dependence.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 6594,
        "total_tokens": 9741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 6594,
        "total_tokens": 9741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure alone does not specify a finite small-signal resistance. It shows the connections, but not the inverters’ transistor models, parasitic capacitances, or operating conditions.\n\nFor an idealized CMOS model with no leakage or switching-current effects, the supply draws no current, so its small-signal conductance is zero and \\(R_X\\to\\infty\\). A real oscillating ring draws periodic supply current, so its effective resistance depends on the device details and on how the supply is perturbed. If each inverter were modeled as an identical, independent supply resistance \\(r_s\\), the three in parallel would give \\(R_X=r_s/3\\); the figure does not provide \\(r_s\\).",
        "format": "markdown",
        "sha256": "39538e9946fb2cdef9543acefa57909295dde701e70b7778c8d2223df4f595cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer notes that an oscillating ring draws periodic supply current, but misses the dominant mechanism: charging and discharging the load capacitances. It incorrectly treats the resistance as underdetermined and gives no oscillation-based estimate such as 1/(3 f0 CL).",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 5848,
        "total_tokens": 8995,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 5848,
        "total_tokens": 8995,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the **running oscillator**, that formula is not generally its supply resistance. It is an approximation for a small, quasi-static perturbation about the **symmetric DC equilibrium**.\n\nAt that equilibrium, all three stage nodes have the same voltage. A common supply perturbation makes their small-signal voltages equal, so each transistor’s gate and drain move together. In that common-mode analysis, the devices act approximately diode-connected, giving the quoted result (more accurately, each diode-connected resistance is about \\(1/(g_m+g_{ds})\\)).\n\nDuring oscillation, the stage voltages are phase-shifted, the devices’ conduction and \\(g_m\\) vary over the cycle, and the supply current is periodic. A slow supply change should be analyzed using the change in **cycle-averaged** current,\n\\[\nR_{\\text{inc,slow}}=\\left(\\frac{d\\overline{I}_{DD}}{dV_{DD}}\\right)^{-1}.\n\\]\nFor a supply ripple at a particular frequency, the relevant impedance depends on that frequency and on the oscillator’s periodic operation; the response can include sidebands around the oscillation frequency.\n\nSo the expression can describe the formal—usually unstable—DC equilibrium, but there is no universal replacement value for the oscillating state. It requires analysis of the actual periodic waveform and loading.",
        "format": "markdown",
        "sha256": "9564d2bae6daa6c060a903bcbc5baff7e1072f313576cae9c36701c179282aaf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that the DC small-signal result does not directly describe the running oscillator, but misses the key capacitive charging mechanism and the conclusion that the effective resistance remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3227,
        "output_tokens": 16859,
        "total_tokens": 20086,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3227,
        "output_tokens": 16859,
        "total_tokens": 20086,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**For the running oscillator, the quoted value is not generally the supply resistance.** But oscillation does not give a single replacement number; you must specify how the supply is perturbed.\n\nThe expression can be a rough quasistatic estimate around a symmetric **DC** equilibrium, under simplifying assumptions. In that particular common-mode perturbation, the stage nodes may move together, making the gate and drain voltage changes similar. But the MOSFETs are not physically diode-connected: equal gate and drain voltages at the DC bias point do not by themselves make them a short in the small-signal circuit.\n\nWhen the ring is oscillating, its node voltages, device transconductances, and supply current vary over the cycle. For a slow DC supply change, define an average-current resistance,\n\n\\[\nR_{DD,0}=\\left(\\frac{d\\langle I_{DD}\\rangle}{dV_{DD}}\\right)^{-1}.\n\\]\n\nFor supply ripple at a particular frequency, the appropriate quantity is a frequency-dependent complex impedance about the periodic operating state; the response can include components at sideband frequencies. Both depend on the oscillator’s frequency and waveform, switching and overlap currents, capacitances, and leakage—not just \\(g_{mn}\\) and \\(g_{mp}\\). For example, average switching current is roughly proportional to \\(C_{\\rm eff}V_{DD}f_{\\rm osc}(V_{DD})\\).\n\nSo the formula may describe a particular static approximation, but it does not generally describe the running oscillator. An ordinary AC analysis around a DC operating point also does not capture the oscillating state. Oscillation alone does not imply a particular value—or a negative resistance.",
        "format": "markdown",
        "sha256": "a6cc80a20c38e1ef210dd3e9145a7d3044556cbd3c1b1bc68a5d8a43002bb921"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly notes that a running oscillator’s supply current includes capacitive switching current and that the static small-signal expression is not generally sufficient. But it does not derive the capacitive resistance estimate or establish the key result that the resistance remains on the order of the MOS on-resistance, rather than becoming much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 20194,
        "total_tokens": 23421,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19841,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 20194,
        "total_tokens": 23421,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19841,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Not as a description of the running oscillator.** The quoted expression is a static small-signal result for the balanced DC operating point, where all three inverter nodes are at the same voltage. For a common-mode perturbation there, each inverter can be approximated as an NMOS and PMOS small-signal resistance in series, with three such branches in parallel. That DC point may be unstable, but its small-signal resistance is still mathematically defined.\n\nDuring oscillation, the node voltages and transistor transconductances vary through the cycle; devices turn off and switching capacitances draw current. A small supply perturbation therefore sees a time-varying response, not generally one fixed, real \\(R_X\\). For a specified AC perturbation, use a periodic small-signal analysis; for a slow supply change, one can define a resistance from the change in cycle-averaged supply current.\n\nSo the formula may describe the **unstable DC equilibrium**, but it does not in general give the supply resistance of the **oscillating state**.",
        "format": "markdown",
        "sha256": "c6eb4b64d955c4fab7c02486bcc7993b8d17e3e5aef509905f3f4b2e887fe4b2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It distinguishes the unstable DC small-signal result from the oscillating state and mentions switching-capacitance currents, but does not establish the average capacitive-current relation or the key conclusion that RX remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 9024,
        "total_tokens": 12251,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 9024,
        "total_tokens": 12251,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial differential gain generally **increases** as M7 is widened. A wider M7 provides more tail current, raising the input pair’s transconductance and the rate at which a small input difference produces a voltage difference at the outputs. The increase is not necessarily linear; extra parasitic capacitance and power can limit the benefit at large widths.",
        "format": "markdown",
        "sha256": "9773ea0ae8f254bfbe42c1cd9bab23a9d08595f5b4f7b55ff120970a1bd64d7a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives the opposite trend: initial gain decreases as M7 widens. It correctly notes that tail current and input-pair transconductance increase, but misses that gain scales roughly with gm/ICM, which decreases.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 4377,
        "total_tokens": 9180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4300,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 4377,
        "total_tokens": 9180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4300,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain generally **increases** as \\(M_7\\) gets wider. A wider \\(M_7\\) provides more tail current during evaluation, increasing the transconductance of the input pair \\(M_1\\)–\\(M_2\\). The same input difference then produces a larger differential current and a faster initial separation of the outputs. The increase is not necessarily linear, and comes with higher power and parasitic capacitance.",
        "format": "markdown",
        "sha256": "0bc6ec0fa20fc6ab67642a0125b403c47a6bfe048a30f4682a485a37d64d6095"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The trend is opposite to the correct result: increasing M7 width raises tail current and reduces the initial gain factor (roughly gm/ICM). The answer notes that input-pair gm rises, but incorrectly treats that alone as implying greater gain.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 5188,
        "total_tokens": 9991,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5089,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 5188,
        "total_tokens": 9991,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5089,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain generally **increases** as M7 gets wider. A wider M7 provides more tail current when the clock turns it on, raising the input pair’s transconductance and producing a larger, faster differential change at X and Y. The final output swing remains essentially the same; parasitics and other device limits eventually constrain the improvement.",
        "format": "markdown",
        "sha256": "af35d5c22344cb687577b0bf52565ab563eb078e5b91880f77acf2f5ed30834c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The trend is opposite to the correct result: increasing M7 width increases tail current and decreases the initial gain because the input-pair transconductance grows more slowly than the current. The answer identifies the increased tail current but draws the wrong conclusion.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 4681,
        "total_tokens": 9484,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4603,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 4681,
        "total_tokens": 9484,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4603,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain decreases. For the same differential input current, larger capacitances at P and Q make the voltage difference build up more slowly (\\(\\Delta V \\propto 1/C\\)). The latch therefore starts regeneration with a smaller differential signal, increasing the decision time, though its eventual output can still reach the same rail levels.",
        "format": "markdown",
        "sha256": "ff5fd678ef6f5f616d426bc3d739001bbed82cffe2d2b37b29a6152fce2fb585"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite to the essential result: larger capacitance slows the transient but proportionally lengthens the amplification phase, so the initial gain remains approximately unchanged. The answer notes the slower voltage buildup but misses this cancellation and incorrectly infers a smaller initial gain.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 3009,
        "total_tokens": 7812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2935,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 3009,
        "total_tokens": 7812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2935,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain decreases. The input pair’s differential current charges/discharges P and Q, so over a fixed early interval the differential voltage is roughly\n\n\\[\n\\Delta V_{PQ}\\approx \\frac{I_{\\text{diff}}\\,t}{C_{P,Q}}.\n\\]\n\nIncreasing the capacitance therefore slows the buildup of the differential signal and gives the regenerative latch a smaller initial imbalance. The eventual output can still reach full logic levels, but the decision takes longer.",
        "format": "markdown",
        "sha256": "c473fc25a69f61aefe141d0accd5de8e621b5ef31bee4e51d607f91d87314784"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance slows the transient, but it mistakes fixed-time buildup for the initial gain. The longer amplification interval cancels the capacitance, so the initial gain remains approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 3513,
        "total_tokens": 8316,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3409,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 3513,
        "total_tokens": 8316,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3409,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It **decreases**. During evaluation, the input pair’s differential current charges and discharges the capacitances at P and Q, so over a fixed time the differential voltage is roughly \\(\\Delta V_{PQ}\\approx \\Delta I\\,t/C_{PQ}\\). Larger capacitance gives a smaller initial voltage difference to seed the latch and slows the decision. The eventual rail-to-rail output may still be reached, but later.",
        "format": "markdown",
        "sha256": "5fe3b558478b27f3f99a174ccd80e9495f238903d82f7e6fa60baf239a48bd26"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives the wrong trend: the initial gain remains approximately unchanged because the longer amplification interval with larger capacitance cancels its reduced voltage slope. It correctly notes that larger capacitance slows the transient, but mistakes that delay for a reduced initial gain.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 4841,
        "total_tokens": 9644,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 4841,
        "total_tokens": 9644,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "A **modest increase usually improves the latch’s regeneration speed**: M5 and M6 are cross-coupled pull-ups, and greater width gives them more transconductance and stronger positive feedback.\n\nBut wider devices also add capacitance at X and Y. If that extra load outweighs the stronger feedback, further widening can slow the outputs. So the effect isn’t monotonic; there’s an optimum width.",
        "format": "markdown",
        "sha256": "8035e673801d78f6e750a878138534590a8d02e8b1c06861275c4e1fa078fcf7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that wider M5/M6 initially strengthen regeneration and improve speed, while added capacitance eventually limits the benefit and creates an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 7407,
        "total_tokens": 12209,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7317,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 7407,
        "total_tokens": 12209,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7317,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Usually, a moderate increase improves the latch’s regeneration speed.** M5 and M6 provide cross-coupled positive feedback, and wider devices have greater drive and transconductance.\n\nBut wider devices also add capacitance at the latch nodes. If that added capacitance outweighs the stronger feedback, further widening can **slow** the comparator. So the effect is not unlimited or guaranteed; there is typically an optimum width.",
        "format": "markdown",
        "sha256": "e95abdb9631ebda98eb91ac57ce9882093ea11a76348470b403e0749724f261c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M5/M6 initially strengthens regeneration and improves speed, while added node capacitance eventually limits the benefit and creates an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 8451,
        "total_tokens": 13253,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 8451,
        "total_tokens": 13253,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M5 and M6 are the cross-coupled PMOS pull-ups, so **moderately increasing their widths usually speeds up regeneration** by increasing their transconductance and pull-up current.\n\nBut wider devices also add capacitance to nodes X and Y, which can slow the initial voltage changes. So the improvement is not unlimited: excessive widening can reduce speed. The net effect depends on the other device sizes and node loads; there is usually an optimum.",
        "format": "markdown",
        "sha256": "b1b950223d44f2574c61e3dc43b5657f18f09fa874970abacb898db198e75da0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M5 and M6 initially strengthens regeneration and improves speed, while added node capacitance eventually limits the benefit and can create an optimum.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 8767,
        "total_tokens": 13569,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8669,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 8767,
        "total_tokens": 13569,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8669,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "There is no unconditional answer. Widening a clocked transistor lowers its on-resistance, so it can speed up the transition at \\(X\\) or \\(Y\\) if that transistor is the bottleneck. But it also increases capacitance on \\(CK/\\overline{CK}\\) and adds drain capacitance to \\(X\\) or \\(Y\\), which can slow the clock edges and load the next stage.\n\nSo a modest increase may improve speed; beyond an optimum, it can degrade it. With an ideal clock and fixed loads, the local stage generally gets faster, but the schematic alone doesn’t determine the overall speed change.",
        "format": "markdown",
        "sha256": "bbdc89d9169d235e42314dd74e23f43a46f7cd2c62f5fa22baa6a98a4988d737"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the initial speed benefit from reduced on-resistance and the eventual capacitance penalty/optimum. Its caveat that the net effect depends on the design does not change that trend and is allowed by the full-credit rule.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 10114,
        "total_tokens": 12177,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9977,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 10114,
        "total_tokens": 12177,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9977,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "There’s a trade-off. Wider clocked transistors have lower on-resistance, so—assuming ideal clock signals—they can reduce the delay through each gate. But they also add capacitance to CK and \\(\\overline{CK}\\), and add diffusion capacitance at nodes X and Y. With real clock drivers and neighboring stages, that extra load can slow the clock edges and signal transitions.\n\nSo the overall speed is not guaranteed to improve: there is an optimum size. Blindly widening all the clocked transistors can degrade the circuit’s maximum speed if the added clock and node capacitance outweighs the resistance reduction.",
        "format": "markdown",
        "sha256": "24fe5dd2a493d933c45f3a811e7fccf98e34fa01ed474364d57d0cd7aa21055a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the resistance reduction, added capacitance at X/Y, and an optimum size. However, it does not clearly state the expected initial speed improvement, instead leaving the overall trend uncertain.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 7849,
        "total_tokens": 9912,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7717,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 7849,
        "total_tokens": 9912,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7717,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "There is a **trade-off**, so increasing the widths does not always make the circuit faster.\n\nWider clocked transistors have lower on-resistance, which can speed up a transition at X or Y. But they also add diffusion capacitance at those nodes and increase the load on CK and \\(\\overline{\\mathrm{CK}}\\). Since the unclocked M1 devices remain in series, the benefit from reducing the clocked devices’ resistance eventually becomes small.\n\nSo modest upsizing may help if the clock is stiff and the clocked devices are the bottleneck. With a finite-strength clock driver, or beyond the optimum size, the added capacitance can **degrade overall speed**. In practice, the widths should be optimized rather than simply increased.",
        "format": "markdown",
        "sha256": "6c653254c38393b5c8af136dd8d990c45e9c57940c53e4b11d1ae8fdea606228"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the resistance benefit and capacitance penalty, but makes initial improvement conditional on the clock being stiff and the clocked devices being the bottleneck. The expected trend is that widening improves speed initially even if the data-driven devices are the bottleneck, before added capacitance limits or reverses the gain.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 7044,
        "total_tokens": 9107,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6884,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 7044,
        "total_tokens": 9107,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6884,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The two clocked-inverter stages act as master and slave latches, enabled on opposite clock phases. With \\(Z=\\overline{Y}\\), \\(X\\) toggles on one clock edge and \\(Y\\) (and \\(Z\\)) on the other. They repeat every \\(2T_{\\rm CK}\\), so their frequency is \\(f_{\\rm CK}/2\\).\n\nFor a 50%-duty clock, the transitions are separated by \\(T_{\\rm CK}/2\\), which is one quarter of the divided-output period—\\(90^\\circ\\). Thus \\(X\\) and \\(Z\\) (or \\(X\\) and \\(Y\\), with the opposite lead/lag) are quadrature. \\(Y\\) and \\(Z\\) themselves are complements, not quadrature. Duty-cycle error and circuit delays can shift the phase from exactly \\(90^\\circ\\).",
        "format": "markdown",
        "sha256": "46b182f8fa5521b0e7148e037d503b4e96ca3410f052a40d24773a0633b51783"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature and half-period transition spacing, and notes that delays can skew the phase. It does not identify the unequal loading of the two latch outputs as a separate source of nonquadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 15214,
        "total_tokens": 17262,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 15214,
        "total_tokens": 17262,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—ideally, \\(X\\) and \\(Y\\) are quadrature outputs. The two clocked inverters operate on opposite phases of CK; their feedback makes each node toggle once per input-clock cycle, giving an output frequency of \\(f_{CK}/2\\). Their transitions occur on opposite CK edges, so with a 50%-duty-cycle clock they are separated by \\(T_{CK}/2\\), or 90° of the divided-output period.\n\nSince \\(Z=\\overline{Y}\\), \\(X\\) and \\(Z\\) are also in quadrature, while \\(Y\\) and \\(Z\\) are complementary (180° apart). Clock duty-cycle error and circuit delays can shift the ideal phase relationship.",
        "format": "markdown",
        "sha256": "4aa314b1c62b4ca341630abe65725f9e9b1f47721656bd6853bbfc0e902fc568"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature relationship and notes that delays can disturb it, but does not explain the unequal loading of the two latches, a key reason the outputs are not exactly in quadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 12298,
        "total_tokens": 14346,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12139,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 12298,
        "total_tokens": 14346,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12139,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The clocked inverter stages update on opposite clock phases: \\(X\\) updates during CK high, and \\(Y\\) during CK low. The feedback makes both outputs toggle at \\(f_{CK}/2\\); with a 50%-duty CK, their transitions are separated by a quarter of the output period, or \\(90^\\circ\\). Thus \\(X\\) and \\(Y\\) are quadrature outputs. \\(Z\\) is simply the complement of \\(Y\\).",
        "format": "markdown",
        "sha256": "a318c016e1ee00db84ed6f370561841825d045635fea3a67c27244de66d464e3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature from opposite-phase switching, but omits both reasons the outputs are not exactly in quadrature: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 10466,
        "total_tokens": 12514,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 10466,
        "total_tokens": 12514,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It’s a tradeoff, so the schematic alone doesn’t determine a single direction. Wider clocked transistors have lower on-resistance, which can speed up charge and discharge through each enabled stage. But they also add capacitance to CK/CK̅ (and parasitic capacitance at internal nodes), loading the clock.\n\nWith ideal, unchanged clock edges, widening them can improve the stage’s delay. With a finite-strength clock driver, excessive widening can slow the clock edges and degrade the overall speed. There is therefore an optimum width; widening is not an automatic speed improvement.",
        "format": "markdown",
        "sha256": "21d26bdfc9f833d37b4846759e7b7e803e5525c98a547d155d02a4c0ffdefe03"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly notes that lower on-resistance can improve speed, but it does not give the expected overall conclusion that widening improves speed considerably. It overstates clock loading as making the trend indeterminate and misses the topology’s limited data-path/output loading and charge-sharing effect.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 8396,
        "total_tokens": 10526,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8273,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 8396,
        "total_tokens": 10526,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8273,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It’s a trade-off, so the schematic alone doesn’t determine a single result. Wider clocked transistors have lower on-resistance and can speed up the pull-up/pull-down path. But they also add clock-gate capacitance (and parasitic diffusion capacitance), loading the clock and slowing its edges if the clock driver is unchanged.\n\nSo with an ideal, fixed-slew clock, speed improves; in the real circuit, oversizing can degrade overall speed once clock loading dominates. There is an optimum width.",
        "format": "markdown",
        "sha256": "7847b3ce5169e5055981b313a91b886446df99c563779cf30654f67cabac8c43"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that lower on-resistance initially improves speed, but omits charge sharing and overstates clock loading as making the practical result indeterminate or creating an optimum. The topology’s added capacitance largely avoids the data path and outputs.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 9209,
        "total_tokens": 11339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9098,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 9209,
        "total_tokens": 11339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9098,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "There’s a tradeoff, so the figure alone doesn’t determine a single result. Wider clocked transistors have lower on-resistance, which speeds the data transition if CK and \\(\\overline{\\text{CK}}\\) are ideal. But they also add clock-gate and diffusion capacitance. With a fixed, finite-strength clock driver, that extra load slows the clock edges and can make the overall circuit slower.\n\nSo widening may improve the local switching path, but over-sizing can degrade overall speed; the best width depends on the clock driver and the other loads.",
        "format": "markdown",
        "sha256": "85d0d8272e93e8d0e5ae776af84f4805dbd15993c09f5fd3698befb935bb54df"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly notes that wider clocked devices reduce on-resistance, but it makes the overall speed indeterminate and suggests clock loading can reverse the improvement. The topology-specific conclusion is that speed improves considerably because the added capacitance has little effect on the data path; charge sharing degrades swing but is acceptable up to a point.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 6236,
        "total_tokens": 8366,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 6236,
        "total_tokens": 8366,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming a switch closes when its control is high, the two switches operate in opposite phases. Let \\(Q\\) be the output of the rightmost inverter. The two right-hand inverters together are non-inverting.\n\n| Clock phase | Switches | Effect |\n|---|---|---|\n| \\(CK=1\\) | \\(CK\\) switch closed; \\(\\overline{CK}\\) switch open | The input of Inv1 is connected to \\(Q\\), so Inv1 produces \\(\\overline Q\\). The output path is disconnected, so \\(Q\\) is retained. |\n| \\(CK=0\\) | \\(CK\\) switch open; \\(\\overline{CK}\\) switch closed | The sampled input is retained, and Inv1’s output reaches \\(Q\\) through the two-inverter buffer. Thus \\(Q_{\\text{new}}=\\overline{Q_{\\text{old}}}\\). |\n\nSo \\(Q\\) toggles on each falling edge of \\(CK\\): \\(0,1,0,1,\\ldots\\). The arrangement functions as a modulo-2 counter (a divide-by-2 circuit), with \\(f_Q=f_{CK}/2\\). This ideal operation assumes the isolated nodes retain their values; a practical circuit needs adequate dynamic storage and suitable clock timing.",
        "format": "markdown",
        "sha256": "550a7765d86f9776f6503d8c9e8452e432e421221ec68da6abfa823acbac8210"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a divide-by-two and describes alternating sample/hold phases with dynamic storage; the half-frequency output is the essential result.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 8567,
        "total_tokens": 9857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 8567,
        "total_tokens": 9857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(Q\\) be the output of the rightmost inverter and \\(M\\) the output of Inv1. Assume each switch closes when its labelled clock signal is high.\n\n- **CK high:** The CK switch closes and the \\(\\overline{\\text{CK}}\\) switch opens. Inv1 sees \\(Q\\), so \\(M=\\overline Q\\). The downstream pair is isolated and holds its previous state.\n- **CK low:** The CK switch opens and the \\(\\overline{\\text{CK}}\\) switch closes. The stored value \\(M=\\overline{Q_{\\text{old}}}\\) passes through Inv2 and Inv3. Those two inversions preserve polarity, so\n  \\[\n  Q_{\\text{new}}=M=\\overline{Q_{\\text{old}}}.\n  \\]\n\nThus \\(Q\\) toggles at each falling edge of CK. The arrangement acts as a **divide-by-two circuit** (a dynamic T flip-flop with \\(T=1\\)): \\(f_Q=f_{\\text{CK}}/2\\). Its initial polarity is unspecified because no reset is shown. The isolated nodes rely on capacitance to retain their levels, so this is dynamic rather than static storage.",
        "format": "markdown",
        "sha256": "028fc08496492473c46104cf683a43c22bfdccb34d570ed6e857b06417ab1dd7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a divide-by-two circuit implemented with dynamic storage, and explains that the output toggles to produce half the clock frequency. The detailed signal-path account is not required for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 13603,
        "total_tokens": 14893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13342,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 13603,
        "total_tokens": 14893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13342,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming each switch closes when its named clock is high, the circuit is a **dynamic divide-by-two**, not a free-running ring oscillator.\n\nLet \\(Q\\) be the output of the rightmost inverter, \\(a\\) the input of Inv\\(_1\\), and \\(b\\) the input of the second inverter. The last two inverters cancel logically, so \\(Q=b\\); Inv\\(_1\\)'s output is \\(\\bar a\\).\n\n- **CK high:** the CK switch is closed and the \\(\\overline{CK}\\) switch is open. Thus \\(a=Q\\), while \\(b\\) is isolated and holds its charge. The output holds its value.\n- **CK goes low:** the CK switch opens, so \\(a\\) retains its previous value. The \\(\\overline{CK}\\) switch closes, connecting \\(b\\) to \\(\\bar a\\). Therefore \\(Q=b=\\bar Q_{\\text{old}}\\): the output toggles.\n\nSo \\(Q\\) toggles once per clock cycle, nominally on each falling edge of CK. Its period is \\(2T_{CK}\\), giving \\(f_Q=f_{CK}/2\\). With no reset, its initial phase is unspecified.\n\nThis behavior relies on charge storage at the inverter inputs when the switches are open. In a purely static Boolean model those nodes are floating, so the behavior is not fully defined. The clock phases should also avoid overlap: if both switches close together, they complete the odd-inverter ring and may cause oscillation or glitches.",
        "format": "markdown",
        "sha256": "2b050828f4738986aac261a3c2d4fd07e2ab45d6eac5027280f0576a9b56f4bc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic divide-by-two and explains charge storage and toggling at half the clock frequency, satisfying the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 14833,
        "total_tokens": 16123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 14833,
        "total_tokens": 16123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is an **alternate feedback drive**, not an extra inverter in series. It drives the node after the first black inverter from the loop’s feedback node, so it can keep that node driven when the CK-controlled path is off. If it is the active path in the loop, its delay replaces the first stage’s delay and affects the loop period.\n\nIt may improve edge speed by adding drive, but it also adds capacitance and switching power. Since its output is tied to the black inverter’s output, the two can briefly—or, if the black inverter’s input is isolated, potentially longer—drive opposite values. That contention can cause extra current and glitches. So the net effect on speed or oscillation frequency depends on sizing and clock timing; it is not automatically a performance improvement.",
        "format": "markdown",
        "sha256": "710ca377a7e7f764d1fd864f0cd36eb622557b1dd6fbf88f7fbef80bc11af22c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes possible contention at the shared output, but misidentifies the red inverter as an alternate feedback/keeper path. It misses the feedforward bypass that improves high-speed operation and the unclocked branch’s low-frequency drawback, which raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 8736,
        "total_tokens": 9895,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8571,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 8736,
        "total_tokens": 9895,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8571,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is an always-on feedback path around the CK-controlled first inverter. When that switch is open, it still drives the node before the \\(\\overline{CK}\\) switch; with the latter closed, it completes a feedback loop through the two right-hand inverters. This keeps the node defined and allows the enabled ring to oscillate or restart.\n\nIts delay is part of that loop, so a slower Inv1 can lower the maximum oscillation frequency. A stronger, faster inverter may improve the signal slew, but it also adds loading, area, and power. It is therefore not an unconditional speedup.",
        "format": "markdown",
        "sha256": "6387d1db869cbb8be6b49529647b070bead0376c8f8212713cc48ba4c69d3e55"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that the unclocked branch can form a loop, but miscasts the inverter mainly as a keeper/feedback path and misses the key effects: bypassing the first latch speeds high-frequency operation, while the branch raises the minimum usable clock frequency at low rates.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 11495,
        "total_tokens": 12654,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11364,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 11495,
        "total_tokens": 12654,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11364,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter provides an **always-on parallel path** from the feedback node to the output of the first black inverter; it is not an extra inverter in series. It drives that node with the inverted feedback signal, bypassing the CK-controlled switch. This can keep the node driven and reduce its transition delay, potentially speeding the loop.\n\nThe trade-off is that it bypasses the clock’s isolation: the node may change when it was meant to hold, causing races or glitches. It also adds load and switching power, and could fight the black inverter if their outputs differ while the switch is open. So it may improve local speed, but the overall performance depends on the circuit’s timing and implementation.",
        "format": "markdown",
        "sha256": "74d3db8652fb7728fea1de7108ab36e20abbb374e5c72041faa9a10d507cd766"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the always-on feedforward path bypassing the CK switch and its speed benefit, but omits the key low-frequency drawback: the branch can overpower the latch and raise the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 9301,
        "total_tokens": 10460,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9155,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 9301,
        "total_tokens": 10460,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9155,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. Let \\(A\\) be the node before the CK switch, \\(X\\) the input of Inv1 after that switch, and \\(Y\\) the shared output node of Inv1 and the red inverter.\n\nThe two inverters drive \\(Y\\), but their inputs are different:\n\n\\[\nY_{\\text{Inv1}}=\\overline X,\\qquad Y_{\\text{red}}=\\overline A.\n\\]\n\nWhen the CK switch is closed, \\(X=A\\), so they simply drive \\(Y\\) in parallel. When it is open, \\(X\\) is isolated while the red inverter still drives \\(Y\\) from \\(A\\); if \\(A\\) and the stored value at \\(X\\) differ, the inverters can contend. That is not a cross-coupled latch. A keeper for Inv1 would feed \\(Y\\) back through a weak inverter to \\(X\\).\n\nThe red inverter is an **ungated bypass/feedback path** from the loop-return node \\(A\\) to \\(Y\\). When the \\(\\overline{CK}\\) switch is closed, that path plus Inv2 and the last inverter forms a three-inverter feedback loop—oscillator-like or contending, not a stable positive-feedback latch.\n\nSo it does not, as drawn, provide static retention or remove the leakage-based clock-period limit. The inputs isolated by the clock switches still lack a DC path to restore their charge.",
        "format": "markdown",
        "sha256": "fa3b671f770070a06aa3932de23cf7cd72d88c20962429f4ca7b63cd8f6e9dfc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the ungated bypass and resulting inverter loop. However, it misses the key operating tradeoff: the branch can speed high-rate operation but overpower the intended latch at low rates, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 29853,
        "total_tokens": 31057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29547,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 29853,
        "total_tokens": 31057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29547,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—not as drawn. Let `Q` be the return wire from the last inverter, `X` the node after the `CK` switch, and `Y` the output of `Inv1`. The connections are:\n\n```text\nQ ── CK switch ── X ── Inv1 ── Y\nQ ───────────── red inverter ── Y\n```\n\nSo `Inv1` and the red inverter have their **outputs tied together**. The red inverter’s input is `Q`, not `Y`, and its output does not feed `Inv1`’s input `X`. A cross-coupled keeper would feed `Y` back to `X` through a weak inverter.\n\nWhen `CK` is on, `X = Q`, so both inverters drive `Y` to the same value. When `CK` is off, `X` is isolated and stores charge dynamically; the red inverter does not restore it. The node after the \\(\\overline{CK}\\) switch is also isolated during its off phase. Thus the red inverter does **not** remove the leakage-related hold-time limit.\n\nIts definite effect is to provide an **always-on inverting bypass** from `Q` to `Y`, bypassing the `CK`-controlled path. When the \\(\\overline{CK}\\) switch conducts, that bypass also makes a feedback loop through `Inv2` and `Inv3` with an odd number of inversions. That is not a bistable latch; depending on timing and drive strengths, it can lead to oscillation or contention with `Inv1`.",
        "format": "markdown",
        "sha256": "c66432c3d9f23f36d5814e9d63af954744857a8654bdc661c994f16dbb698efe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the always-on feedforward bypass and possible feedback loop. It omits the key rate-dependent tradeoff: the bypass can speed high-rate operation but overpower the dynamic latch at low rates, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 32169,
        "total_tokens": 33373,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31829,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 32169,
        "total_tokens": 33373,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31829,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—not as a cross-coupled keeper latch.** The red inverter’s input is connected to the return node at the output of the rightmost inverter, *before* the CK switch. Its output is connected to the output of the lower, clocked inverter (the node before the \\(\\overline{CK}\\) switch).\n\nSo, when CK is on, the red inverter and the clocked inverter see the same input and drive the same output: they are in parallel. When CK is off, the red inverter provides an always-on bypass from the return node to that output; it does **not** feed back into the isolated input of the clocked inverter.\n\nThere is also a polarity problem for the latch explanation. With the \\(\\overline{CK}\\) switch on, the two inverters to the right take that shared output back to the return node with no net inversion. The red inverter adds one inversion, making an **odd-inversion feedback loop**. That is not a two-state latch; it can behave as a clock-gated ring oscillator. During other phases, nodes isolated by the switches can still be dynamic and subject to leakage.\n\nThus the red inverter may provide an alternate drive path, but the schematic does not show a cross-coupled static latch, and it does not establish that a minimum clock frequency for retention is removed.",
        "format": "markdown",
        "sha256": "7d32043c71ee41660a5fbc1af9917102379d57053896c0e852ac0a28ad150597"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies an always-on feedforward bypass, along with the possible odd-inversion ring. However, it omits the key tradeoff: the branch can help at high speed but overpower the intended dynamic-latch behavior at low clock rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 23822,
        "total_tokens": 25026,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23540,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 23822,
        "total_tokens": 25026,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23540,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat **\\(R_F\\)** as the matching variable; it is not generally \\(50\\,\\Omega\\). The resistor is in a feedback path, so the input resistance depends on the amplifier’s gain.\n\nAt midband, neglecting the MOS capacitances and treating \\(C_1\\) as a short, define\n\n\\[\ng_m=g_{m1}+g_{m2},\\qquad\nR_o=r_{o1}\\parallel r_{o2}\\parallel R_L,\n\\]\n\nwhere \\(R_o\\) excludes \\(R_F\\). A small-signal calculation gives\n\n\\[\nR_{\\text{in}}=\\frac{R_F+R_o}{1+g_mR_o}.\n\\]\n\nThus, to set \\(R_{\\text{in}}=R_s=50\\,\\Omega\\),\n\n\\[\n\\boxed{R_F=50\\,\\Omega\\,(1+g_mR_o)-R_o.}\n\\]\n\nWhen \\(R_F\\gg R_o\\), this is often approximated by \\(R_{\\text{in}}\\simeq R_F/(1+g_mR_o)\\), or \\(R_F\\simeq50\\,\\Omega(1+|A_0|)\\), with \\(A_0\\simeq-g_mR_o\\). Recalculate \\(R_F\\) whenever the transistor sizing or bias changes.\n\nA useful first-order noise estimate, for high loop gain, is\n\n\\[\nF \\simeq 1+\n\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}\n     {50\\,\\Omega\\,(g_{m1}+g_{m2})^2}\n+\\frac{50\\,\\Omega}{R_F}\n+\\text{other noise terms}.\n\\]\n\nThe first added term represents MOS channel noise; the second is the feedback resistor’s thermal-noise contribution. This suggests increasing useful \\(g_m\\) and gain, then raising \\(R_F\\) as needed to preserve the \\(50\\,\\Omega\\) input resistance. Optimize \\(W_1,W_2,L_1,L_2\\) and the bias for low noise at the available power; do not assume equal NMOS and PMOS sizes or transconductances. Preserve the inverter’s DC bias point as you change their ratio.\n\nIn practice, minimize NF with a PDK noise simulation while constraining the **complex** input impedance to \\(50+j0\\,\\Omega\\) at the target frequency. Include \\(C_1\\), gate capacitances, output loading, and RF MOS noise models; \\(R_F\\) alone may not correct input reactance. Also constrain gain, power, bandwidth, and stability. A \\(50\\,\\Omega\\) match is not automatically the noise-optimum match, and the schematic alone is insufficient to determine a numerical NF optimum.",
        "format": "markdown",
        "sha256": "47054166e6db775c25a657e5e41dc0df50900933c10f5fd987f79a249c43b6b6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It uses the finite-output-resistance input-match relation and recommends increasing gm while raising RF to preserve the 50 Ω match. Its noise estimate shows the channel-noise contribution falling with gm, capturing the essential optimization beyond the 1+γ limit; the practical simulation advice is consistent.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 23023,
        "total_tokens": 25490,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 23023,
        "total_tokens": 25490,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a shunt-feedback CMOS inverter. For a first-order match at the operating frequency, assume \\(C_1\\) is an AC short and neglect MOS gate current. If \\(A_v=v_o/v_i\\) is the **actual loaded** voltage gain, then\n\n\\[\ni_{\\text{in}}=\\frac{v_i-v_o}{R_F},\n\\qquad\nZ_{\\text{in}}\\approx \\frac{R_F}{1-A_v}.\n\\]\n\nSince the amplifier is inverting, \\(A_v<0\\), so the 50-\\(\\Omega\\) condition is approximately\n\n\\[\nR_F=50\\,\\Omega\\,(1+|A_v|).\n\\]\n\nThis is implicit: changing \\(R_F\\) also changes the gain. Thus, for each transistor size and bias choice, retune \\(R_F\\) until the input is matched. At RF, include \\(C_{gs}\\), \\(C_{gd}\\), and other parasitics; the actual target is normally \\(Z_{\\text{in}}(f_0)=50+j0\\,\\Omega\\), or \\(S_{11}(f_0)=0\\).\n\nA useful first-order guide to the transistor noise is\n\n\\[\nS_{i,\\text{ch}}\\approx4kT(\\gamma_n g_{m1}+\\gamma_p g_{m2}),\n\\qquad\ne_{n,\\text{ch}}^2\\approx\n\\frac{S_{i,\\text{ch}}}{(g_{m1}+g_{m2})^2}.\n\\]\n\nThis channel-noise contribution generally falls as the effective transconductance \\(g_{m1}+g_{m2}\\) increases. The feedback resistor also contributes thermal noise, and at RF the MOS gate and induced-gate noise can matter, so this estimate is not a complete NF calculation.\n\nA practical optimization is therefore:\n\n1. Sweep \\(W_n\\), \\(W_p\\), and bias current/bias point.\n2. For each candidate, adjust \\(R_F\\) (and any matching capacitance) to restore the 50-\\(\\Omega\\) match.\n3. Evaluate **NF with a 50-\\(\\Omega\\) source**, including resistor and transistor noise, and keep the lowest-NF design that meets power, gain, bandwidth, stability, and linearity requirements.\n\nA 50-\\(\\Omega\\) input match is not automatically a noise match, so optimize NF at the required source impedance rather than relying only on \\(NF_{\\min}\\). There is no unique numerical optimum from the schematic alone; it depends on frequency, process model, output load, and design constraints.",
        "format": "markdown",
        "sha256": "e2113d90e8676640d217bd0e4fa0e9237bebaecb78d0483af53e1cec4cb17682"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives a sensible generic strategy—retune RF after changing device size or bias and evaluate NF at the required match—and notes that channel-noise contribution can fall with transconductance. But it misses the essential finite-output-resistance mechanism: increasing gm above 1/Rs while adjusting RF to preserve Rin can reduce NF below 1+gamma. The shunt-feedback match relation alone is not enough.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 24764,
        "total_tokens": 27231,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24206,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 24764,
        "total_tokens": 27231,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24206,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat this as a **constrained NF optimization** at the operating frequency \\(f_0\\). The feedback resistor affects both the input match and the noise, so retune it whenever the transistor sizes or bias change.\n\nWith negligible MOS gate current, the feedback resistor is the main input-current path. If \\(A_v=v_o/v_i\\) is the actual gain with \\(R_F\\) connected,\n\n\\[\nY_{\\text{in}}\\simeq \\frac{1-A_v}{R_F}.\n\\]\n\nSince the inverter gain is negative, this is often written approximately as\n\n\\[\nR_{\\text{in}}\\simeq \\frac{R_F}{1+|A_v|}.\n\\]\n\nThus, for a 50-\\(\\Omega\\) input, choose \\(R_F\\) to satisfy this relation **using the gain of the loaded, feedback-connected circuit**. At RF, include \\(C_1\\), gate capacitances, and the output load; the actual requirement should generally be \\(Z_{\\text{in}}(f_0)=50+j0\\ \\Omega\\), not merely a 50-\\(\\Omega\\) real part.\n\nThe main noise terms include the feedback resistor’s thermal noise, \\(4kT/R_F\\) as a current-noise source, and the two MOSFETs’ channel noise:\n\n\\[\nS_{i,\\text{ch}}=4kT\\left(\\gamma_n g_{m1}+\\gamma_p g_{m2}\\right).\n\\]\n\nIncreasing effective transconductance \\(g_{m1}+g_{m2}\\) can reduce input-referred channel noise and increase gain, allowing a larger \\(R_F\\) while maintaining the match. But larger devices or bias currents also increase capacitance, gate-related noise, and power. The best \\(W_n/W_p\\) ratio is therefore not necessarily a balanced inverter; it depends on the devices’ noise, bias point, and frequency.\n\nA practical procedure is to sweep \\(W_n,W_p\\), channel lengths, and bias current; for each candidate, retune \\(R_F\\) (and \\(C_1\\) or other matching elements if needed) to restore the 50-\\(\\Omega\\) match, then evaluate NF using the process noise models with a 50-\\(\\Omega\\) source. Minimize NF subject to the required gain, power, stability, and linearity constraints.\n\nThe schematic alone does not determine a numerical optimum: the process model, \\(f_0\\), output load, and power limits are needed. Also, in a simple high-output-impedance limit, \\(R_{\\text{in}}\\) can approach \\(1/(g_{m1}+g_{m2})\\); in that case the 50-\\(\\Omega\\) requirement itself strongly constrains \\(g_m\\), so changing \\(R_F\\) alone will not improve the channel-noise contribution.",
        "format": "markdown",
        "sha256": "4250a845e2062a3518f553e57dfb17e5b97a225261b9439ada63939fc9d1fe8e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the correct constrained optimization direction: increase total gm to reduce channel-noise contribution and increase/retune RF to preserve the 50-Ω match. The high-output-impedance remark is conditional and does not overturn that recommendation.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 29490,
        "total_tokens": 31957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28881,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 29490,
        "total_tokens": 31957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28881,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_p\\) be the small-signal voltage at P and \\(s=j\\omega\\). Since the MOS gate draws negligible current, KCL at P gives\n\n\\[\nI_{\\rm in}=sC_{\\rm in}v_p+\\frac{v_p-v_{\\rm out}}{R_F}.\n\\]\n\nThus, if \\(H(s)=v_{\\rm out}/v_p\\) is the actual voltage gain,\n\n\\[\n\\boxed{Z_{\\rm in}(s)=\\frac{1}{sC_{\\rm in}+\\dfrac{1-H(s)}{R_F}}.}\n\\]\n\nThe forward path is inverting, so writing \\(H\\approx-A\\), with \\(A>0\\), gives the usual approximation\n\n\\[\n\\boxed{Z_{\\rm in}(s)\\approx\n\\frac{1}{sC_{\\rm in}+(1+A)/R_F}\n=\\frac{R_F}{1+A+sR_FC_{\\rm in}}.}\n\\]\n\nFor a low-frequency estimate, neglect transistor output resistances. M1 gives\n\\(v_x\\approx-g_{m1}R_{D1}v_p\\). The M2–M3 pair steers the tail current; with \\(V_b\\) at AC ground,\n\n\\[\ng_{m,\\rm eq}=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}},\n\\qquad\nA\\approx g_{m1}R_{D1}\\,g_{m,\\rm eq}R_{D2}.\n\\]\n\nSo the common feedback approximation is\n\n\\[\n\\boxed{\nZ_{\\rm in}(s)\\approx\n\\left[\nsC_{\\rm in}\n+\\frac{1+g_{m1}R_{D1}R_{D2}\n\\left(\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\right)}\n{R_F}\n\\right]^{-1}.\n}\n\\]\n\nAt DC this is \\(R_{\\rm in}\\approx R_F/(1+A)\\). If output loading by \\(R_F\\) is retained, the ideal-\\(r_o\\) model has output resistance \\(R_o\\approx R_{D2}\\); replace \\(R_F\\) in the feedback conductance by \\(R_F+R_o\\). A numerical value requires the device transconductances and resistor values.",
        "format": "markdown",
        "sha256": "8a7d0fa59b696ae2b7e30990235d3a639210977d51e393507f70756930589388"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The KCL/Miller relation is correct, and the answer identifies the key output-resistance correction: using Ro ≈ RD2 and replacing RF by RF + Ro recovers the exact Miller result. Its M2–M3 effective transconductance gives the equivalent unloaded gain for the pair; the simpler RF/(1+A) expression is explicitly an approximation.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 35595,
        "total_tokens": 35805,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35080,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 35595,
        "total_tokens": 35805,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35080,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_P\\) be the small-signal voltage at the input node, and let \\(A_v(s)=v_{\\text{out}}/v_P\\) be the amplifier’s signed voltage gain. Since the MOS gate draws negligible current, the input current is\n\n\\[\ni_{\\text{in}}=sC_{\\text{in}}v_P+\\frac{v_P-v_{\\text{out}}}{R_F}.\n\\]\n\nThus, when \\(R_F\\) does not significantly load the amplifier output,\n\n\\[\n\\boxed{Z_{\\text{in}}(s)=\n\\left[sC_{\\text{in}}+\\frac{1-A_v(s)}{R_F}\\right]^{-1}}.\n\\]\n\nThe forward path is inverting, so write \\(A_v(s)=-A_0(s)\\), with \\(A_0>0\\) in the low-frequency band. Then\n\n\\[\n\\boxed{Z_{\\text{in}}(s)\\simeq\n\\frac{R_F}{1+A_0(s)+sR_FC_{\\text{in}}}}.\n\\]\n\nAt low frequency, where \\(C_{\\text{in}}\\) is effectively open,\n\n\\[\n\\boxed{R_{\\text{in}}\\simeq \\frac{R_F}{1+A_0}}.\n\\]\n\nA first-order gain estimate for the stages shown is\n\n\\[\nA_0 \\simeq\ng_{m1}(R_{D1}\\parallel r_{o1})\n\\left(\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\right)\n(R_{D2}\\parallel r_{o3}),\n\\]\n\nassuming an ideal \\(I_{SS}\\) and a low-frequency small-signal model. Numerical evaluation requires device and resistor values.",
        "format": "markdown",
        "sha256": "5d3a2b3780d475f33dc089117fbd5d31c75a454ed2ec27202aea77accb6786d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the inverting feedback and gives a reasonable approximation, but misses the exact output-resistance contribution: the required result is \\(R_{in}=(R_F+R_{D2})/(1+A_0)\\), not merely \\(R_F/(1+A_0)\\).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 30273,
        "total_tokens": 30483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29886,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 30273,
        "total_tokens": 30483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29886,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_P\\) be the small-signal input voltage. The MOS gate draws negligible current, so the input current goes through \\(C_{\\rm in}\\) and \\(R_F\\):\n\n\\[\ni_{\\rm in}=sC_{\\rm in}v_P+\\frac{v_P-v_{\\rm out}}{R_F}.\n\\]\n\nIf \\(A_v(s)=v_{\\rm out}/v_P\\) is the signed voltage gain, then\n\n\\[\n\\boxed{Z_{\\rm in}(s)=\n\\left[sC_{\\rm in}+\\frac{1-A_v(s)}{R_F}\\right]^{-1}}.\n\\]\n\nFor an inverting amplifier, \\(A_v=-A\\) with \\(A>0\\), giving the familiar result\n\n\\[\nZ_{\\rm in}(s)=\\left[sC_{\\rm in}+\\frac{1+A}{R_F}\\right]^{-1}.\n\\]\n\nThus, at low frequency, \\(R_{\\rm in}=R_F/(1+A)\\); the input capacitance is in parallel with this resistance.\n\nFor the ideal small-signal model of the stages shown, \\(M_1\\) gives \\(v_X/v_P\\simeq-g_{m1}R_{D1}\\). The current-steering \\(M_2\\)-\\(M_3\\) pair has effective transconductance\n\n\\[\ng_{m,\\rm eq}=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}},\n\\]\n\nso the open-feedback gain magnitude is \\(A\\simeq g_{m1}R_{D1}g_{m,\\rm eq}R_{D2}\\). If \\(R_F\\) does not significantly load the output, substitute this \\(A\\) above. Retaining that loading in the ideal model gives\n\n\\[\n\\boxed{Z_{\\rm in}(s)=\n\\left[sC_{\\rm in}+\n\\frac{1+g_{m1}R_{D1}g_{m,\\rm eq}R_{D2}}{R_F+R_{D2}}\n\\right]^{-1}}.\n\\]\n\nA numerical value would require the transistor small-signal parameters.",
        "format": "markdown",
        "sha256": "160973a457ccc861ae91f5f74650c5979da0154618358fd60e75b8db39dac70a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It retains the output resistance and obtains the exact Miller result, giving a low-frequency input resistance of (RF + RD2)/(1 + A0). Its equivalent transconductance gives the golden A0 for a matched M2–M3 pair; the added Cin is simply a parallel input capacitance.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 41134,
        "total_tokens": 41344,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 40664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 41134,
        "total_tokens": 41344,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 40664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the LDO thermal noise as a voltage-noise source at its output. Let \\(S_{\\rm th}(f)\\) be its one-sided voltage PSD in \\(\\mathrm{V^2/Hz}\\), and let \\(H_s(f)\\) be the transfer from \\(V_{\\rm out}\\) to the VCO supply nodes, including the \\(L_1\\) feed and any decoupling. If \\(S_{\\rm th}\\) is already specified at the VCO supply nodes, set \\(H_s=1\\).\n\nFor small, slow supply variations, define the VCO supply-pushing sensitivity\n\\[\nK_{VDD}=\\frac{\\partial f_{\\rm osc}}{\\partial V_{DD}}\\quad [\\mathrm{Hz/V}].\n\\]\nA rail fluctuation then produces frequency fluctuation \\(\\delta f=K_{VDD}\\delta v\\), and phase is the integral of that frequency fluctuation. Thus the LDO-induced phase-noise PSD is\n\\[\n\\boxed{\nS_{\\phi,\\rm LDO}(f)\n=\\frac{|K_{VDD}H_s(f)|^2}{f^2}\\,S_{\\rm th}(f)\n}\n\\qquad [\\mathrm{rad^2/Hz}].\n\\]\n\nUsing the usual one-sided phase-PSD convention, the corresponding single-sideband phase noise is\n\\[\n\\boxed{\n\\mathcal L_{\\rm LDO}(f)=\\frac{1}{2}S_{\\phi,\\rm LDO}(f)\n}\n\\]\nin linear units; convert to dBc/Hz with \\(10\\log_{10}\\mathcal L_{\\rm LDO}\\).\n\nThe schematic and \\(S_{\\rm th}\\) alone are not enough for a numerical result: \\(H_s\\) and the VCO’s supply-pushing sensitivity must be measured or simulated. For offsets where the simple frequency-pushing model is inadequate, use the full supply-to-phase transfer \\(H_{\\phi v}(f)\\) and calculate \\(S_\\phi=|H_{\\phi v}|^2S_{\\rm th}\\). The LDO contribution adds to the VCO’s other phase-noise PSDs if the noise sources are uncorrelated.",
        "format": "markdown",
        "sha256": "1e402d2bf5d395fa4b42babf0971d60e71165a8c79b54c54c3a9989c20badf85"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly converts LDO voltage noise through supply-pushing sensitivity into phase-noise PSD with the expected inverse-offset-squared dependence, and handles the SSB convention appropriately. It omits the circuit-specific insight that supply noise acts directly on the varactors, making the pushing gain closely related to KVCO and reducible by lowering KVCO.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 8751,
        "total_tokens": 12145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 8751,
        "total_tokens": 12145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(S_{\\mathrm{th}}(f)\\) is the LDO’s **output voltage-noise PSD** in \\(\\mathrm{V^2/Hz}\\). The noise reaches the VCO through the supply network, then changes the oscillator frequency and hence its phase.\n\nLet \\(H_s(f)\\) be the transfer from the LDO noise to the effective supply perturbation at the VCO, and let\n\\[\nK_{\\mathrm{VDD}}=\\frac{\\partial f_0}{\\partial V_{\\mathrm{DD}}}\n\\quad [\\mathrm{Hz/V}]\n\\]\nbe the VCO’s supply-pushing sensitivity. For small, sufficiently slow supply variations,\n\\[\n\\delta f_0(t)=K_{\\mathrm{VDD}}\\,\\delta v_{\\mathrm{DD}}(t),\n\\qquad\n\\delta\\phi(t)=2\\pi\\int \\delta f_0(t)\\,dt.\n\\]\nThus the LDO-induced phase PSD at offset \\(f\\) is approximately\n\\[\n\\boxed{\nS_{\\phi,\\mathrm{LDO}}(f)\n=\n\\frac{K_{\\mathrm{VDD}}^2}{f^2}\\,\n|H_s(f)|^2\\,S_{\\mathrm{th}}(f)\n}\n\\]\nin \\(\\mathrm{rad^2/Hz}\\). With the usual one-sided phase-PSD convention, the corresponding single-sideband phase noise is\n\\[\n\\boxed{\n\\mathcal L_{\\mathrm{LDO}}(f)=\\tfrac12 S_{\\phi,\\mathrm{LDO}}(f)\n}\n\\]\nand \\(10\\log_{10}\\mathcal L_{\\mathrm{LDO}}\\) gives dBc/Hz.\n\nFor an accurate result, use the VCO’s full supply-to-phase transfer function—e.g. from periodic steady-state/PXF analysis or supply-injection simulation—instead of the quasi-static \\(K_{\\mathrm{VDD}}/f\\) approximation. \\(H_s\\) should include the relevant LDO noise transfer and supply path (including the \\(L_1\\) network). If \\(S_{\\mathrm{th}}\\) is already measured at the VCO supply, use only the remaining path transfer. A numerical phase-noise value requires this transfer and the VCO’s supply sensitivity; \\(S_{\\mathrm{th}}\\) alone is not enough.",
        "format": "markdown",
        "sha256": "27e7558a4e3df8cb671cb8e15dd20d889ca8f2c343cb8516356d60283f681105"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing and converts LDO voltage-noise PSD to phase noise with the expected 1/f² dependence. It omits the circuit-specific insight that the perturbation acts directly on the varactors, making Kpush closely related to KVCO and lower KVCO beneficial.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 9634,
        "total_tokens": 13028,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9133,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 9634,
        "total_tokens": 13028,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9133,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(S_{\\rm th}(f_m)\\) is the **one-sided voltage-noise PSD** at the LDO output, in \\(\\mathrm{V^2/Hz}\\). Let \\(H_s(f_m)\\) be the transfer from that output through the supply network (including \\(L_1\\)) to the effective VCO supply perturbation, and let\n\\[\nK_{\\rm push}=\\frac{\\partial f_0}{\\partial V_{\\rm eff}}\n\\quad [\\mathrm{Hz/V}]\n\\]\nbe the VCO’s supply-pushing sensitivity.\n\nThe supply-noise PSD seen by the VCO is\n\\[\nS_{v,\\rm eff}(f_m)=|H_s(f_m)|^2 S_{\\rm th}(f_m).\n\\]\nA supply fluctuation changes the instantaneous frequency by \\(\\delta f=K_{\\rm push}\\delta v_{\\rm eff}\\). Since phase is the integral of frequency deviation,\n\\[\n\\boxed{\nS_{\\phi,\\rm LDO}(f_m)\n=\\frac{K_{\\rm push}^2 |H_s(f_m)|^2}{f_m^2}\\,S_{\\rm th}(f_m)\n}\n\\]\nin \\(\\mathrm{rad^2/Hz}\\). With the usual one-sided phase-PSD convention, the corresponding single-sideband phase noise is\n\\[\n\\boxed{\n\\mathcal L_{\\rm LDO}(f_m)\n=\\frac{1}{2}S_{\\phi,\\rm LDO}(f_m)\n}\n\\]\n(linear units); convert to dBc/Hz with \\(10\\log_{10}(\\mathcal L_{\\rm LDO})\\).\n\nIn practice, obtain \\(K_{\\rm push}\\) by sweeping the VCO supply and measuring \\(f_0\\), or measure the supply-to-phase transfer directly. At offsets where the response is not quasistatic, use that full transfer—including the supply network and any AM-to-PM conversion—instead of a constant \\(K_{\\rm push}\\). Add this contribution to the VCO’s other uncorrelated phase-noise PSDs in linear units. A numerical result requires \\(S_{\\rm th}\\) and the VCO’s supply-to-phase sensitivity; the figure alone does not specify them.",
        "format": "markdown",
        "sha256": "bec659f12d7cf5bde29351ceb71375bc9f5333a0f99e2642304debc25fbb3f81"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer correctly converts LDO supply noise through supply-pushing sensitivity and FM-to-phase integration, with consistent one-sided PSD and SSB conventions. It omits the circuit-specific design insight that the supply perturbation acts directly on the varactors, making Kpush closely related to KVCO.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 13523,
        "total_tokens": 16917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13047,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 13523,
        "total_tokens": 16917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13047,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) usually **reduces phase noise**, especially the close-in noise caused by the tail source. It is open at DC, so it ideally leaves the bias current unchanged, but it lowers the tail-node impedance at RF—particularly around the common-mode component near \\(2f_0\\). That suppresses tail-node voltage ripple and the upconversion of tail-source noise into differential phase noise.\n\nIt does not remove noise from the tank or cross-coupled devices, so the improvement depends on what dominates. A poorly chosen value can have little benefit or alter the oscillator’s swing or resonances; there is no fixed dB reduction without the circuit parameters.",
        "format": "markdown",
        "sha256": "33d73f293f57c7c019c7486036b17afa89d8a712d96d4e533b893cc955b06c30"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims a general phase-noise improvement from filtering the tail node, missing the nonmonotonic effect and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 4284,
        "total_tokens": 7851,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 4284,
        "total_tokens": 7851,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Usually it **reduces the phase-noise contribution from the tail source**. In a balanced oscillator, the differential signal has little fundamental-frequency swing at the shared tail node, but common-mode ripple is present around \\(2f_0\\). \\(C_T\\) lowers the tail-node impedance there, suppressing that ripple and reducing the conversion of tail-current noise into phase modulation.\n\nIt does not remove tank or transistor noise, so the **total** improvement depends on whether tail noise was important. It also does not directly filter very low-frequency current variations, where the capacitor is nearly open; parasitics or an unsuitable \\(C_T\\) can introduce other effects.",
        "format": "markdown",
        "sha256": "5530aeae8a86bd3c953ec97207c960f4f2e1c4b7e21094544501ab77e67b7c1f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer presents CT as generally improving phase noise by filtering the tail node, but misses the essential nonmonotonic effect and the class-C improvement and specific degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 6937,
        "total_tokens": 10504,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6796,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 6937,
        "total_tokens": 10504,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6796,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Usually, \\(C_T\\) **reduces phase noise**, mainly by reducing the tail-noise contribution. It is open at DC, so it does not change the bias current, but at RF it can give tail node \\(P\\) a low-impedance path to ground. That suppresses tail-node voltage variations and reduces how effectively noise from the tail source is converted into phase noise by the switching pair.\n\nIn an ideal balanced oscillator, the capacitor loads the common-mode motion, not the differential LC resonance, so tank-limited phase noise may change little. The improvement depends on \\(C_T\\) and the circuit parasitics; it is not guaranteed, and the capacitor may have little effect at very low offset frequencies if its impedance is still high.",
        "format": "markdown",
        "sha256": "b50d6cbc27176f1c3eb76ea62057a6ad9051f461ef2fba9ae646313287731f86"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer presents tail-noise filtering as a phase-noise improvement and does not identify the nonmonotonic effect or Razavi’s class-C, flicker-upconversion, triode, or instability mechanisms. Its caveats do not change the essentially monotonic conclusion.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 6892,
        "total_tokens": 10459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 6892,
        "total_tokens": 10459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a pair of coupled LC oscillators, so the oscillation should be near the loaded resonance of the tanks:\n\n\\[\nf_{\\text{osc}}\\approx \\frac{1}{2\\pi\\sqrt{L_{\\text{eff}}C_{\\text{eff}}}}.\n\\]\n\nHere \\(C_{\\text{eff}}\\) includes transistor, wiring, and any load capacitance. The drawing gives no component values or device parasitics, so a numerical frequency cannot be estimated from it alone. The bias currents mainly establish startup and signal amplitude, though loading and coupling can shift the resonant frequency.",
        "format": "markdown",
        "sha256": "06b7d2b94c969e6e0a774dd2ec2143c90737bfa37081ffb5b77e02cd7482d8cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the tank-resonance estimate and notes that coupling can shift the frequency, but omits the essential coupling-shift estimate, such as Δω ≈ αω₀/(2Q).",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 4708,
        "total_tokens": 6509,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 4708,
        "total_tokens": 6509,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit oscillates near the resonance of its loaded LC tanks:\n\n\\[\nf_{\\text{osc}}\\approx \\frac{1}{2\\pi\\sqrt{L_{\\text{eq}}C_{\\text{eq}}}},\n\\]\n\nwhere \\(C_{\\text{eq}}\\) includes the transistors’ parasitic capacitances and wiring/load capacitance. The two matched tanks should oscillate at roughly the same frequency; coupling may shift it somewhat.\n\nThe figure gives no inductance or capacitance values, so a numerical frequency cannot be determined. The bias currents mainly affect startup and amplitude, not the nominal tank frequency.",
        "format": "markdown",
        "sha256": "d1708a110fecd0d3f3ce97acb60a5852f95e9073402d735fb5948d56b1efb021"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the LC tank resonance, but gives no estimate for the coupling-induced frequency shift. The claim that bias currents mainly do not affect nominal frequency also misses that the shift depends on the coupling strength.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 3538,
        "total_tokens": 5339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3407,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 3538,
        "total_tokens": 5339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3407,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-luna",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Each LC tank oscillates near its resonance:\n\n\\[\nf_0 \\approx \\frac{1}{2\\pi\\sqrt{L_{\\text{tank}}C_{\\text{eff}}}},\n\\]\n\nwhere \\(C_{\\text{eff}}\\) includes the tank capacitance and transistor/interconnect parasitics. Coupling between the two cores can pull or split their resonant modes, but with weak coupling the frequency stays near \\(f_0\\). The bias currents mainly set the oscillation amplitude.\n\nThe drawing gives no inductance or capacitance values, so a numerical frequency cannot be estimated from it alone.",
        "format": "markdown",
        "sha256": "20401bd111da46983bca80a3003dbdf06e046024807be8645ef02e2224d22657"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct LC tank resonance and notes that coupling shifts the modes, but omits the required estimate for the shift, such as Δω ≈ αω₀/(2Q). Saying bias currents mainly set amplitude also misses that the coupling-dependent frequency shift can depend on current ratios.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 2201,
        "total_tokens": 4002,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 2201,
        "total_tokens": 4002,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
