{
  "model_key": "gpt_6_sol",
  "display_name": "GPT-6 Sol",
  "provider": "openai",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "GPT-6 Sol answered the 50 tasks in three rollouts through OpenRouter's chat completions route (openai/gpt-6-sol) at maximum reasoning effort. Requests set max_tokens to 128,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for GPT-6 Sol on 2026-11-10 ($2.00 input, $0.20 cached input, $10.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 112,
          "incorrect_count": 38,
          "partial_credit_count": 38,
          "zero_count": 0,
          "mean_score_0_to_4": 3.513333333333333,
          "score_percent": 87.83333333333333,
          "score_distribution": {
            "1": 11,
            "2": 13,
            "3": 14,
            "4": 112
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 112,
          "incorrect_count": 38,
          "partial_credit_count": 38,
          "zero_count": 0,
          "mean_score_0_to_4": 3.513333333333333,
          "score_percent": 87.83333333333333,
          "score_distribution": {
            "1": 11,
            "2": 13,
            "3": 14,
            "4": 112
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 79,
          "incorrect_count": 11,
          "partial_credit_count": 11,
          "zero_count": 0,
          "mean_score_0_to_4": 3.7777777777777777,
          "score_percent": 94.44444444444444,
          "score_distribution": {
            "1": 4,
            "2": 1,
            "3": 6,
            "4": 79
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 79,
          "incorrect_count": 11,
          "partial_credit_count": 11,
          "zero_count": 0,
          "mean_score_0_to_4": 3.7777777777777777,
          "score_percent": 94.44444444444444,
          "score_distribution": {
            "1": 4,
            "2": 1,
            "3": 6,
            "4": 79
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 33,
          "incorrect_count": 27,
          "partial_credit_count": 27,
          "zero_count": 0,
          "mean_score_0_to_4": 3.1166666666666667,
          "score_percent": 77.91666666666667,
          "score_distribution": {
            "1": 7,
            "2": 12,
            "3": 8,
            "4": 33
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 33,
          "incorrect_count": 27,
          "partial_credit_count": 27,
          "zero_count": 0,
          "mean_score_0_to_4": 3.1166666666666667,
          "score_percent": 77.91666666666667,
          "score_distribution": {
            "1": 7,
            "2": 12,
            "3": 8,
            "4": 33
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 36,
        "incorrect_count": 14,
        "partial_credit_count": 14,
        "zero_count": 0,
        "mean_score_0_to_4": 3.44,
        "score_percent": 86.0,
        "score_distribution": {
          "1": 4,
          "2": 6,
          "3": 4,
          "4": 36
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 39,
        "incorrect_count": 11,
        "partial_credit_count": 11,
        "zero_count": 0,
        "mean_score_0_to_4": 3.56,
        "score_percent": 89.0,
        "score_distribution": {
          "1": 4,
          "2": 3,
          "3": 4,
          "4": 39
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 37,
        "incorrect_count": 13,
        "partial_credit_count": 13,
        "zero_count": 0,
        "mean_score_0_to_4": 3.54,
        "score_percent": 88.5,
        "score_distribution": {
          "1": 3,
          "2": 4,
          "3": 6,
          "4": 37
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 188142,
        "input_tokens": 288942,
        "output_tokens": 790270,
        "total_tokens": 1079212
      },
      "known_totals": {
        "cached_input_tokens": 188142,
        "input_tokens": 288942,
        "output_tokens": 790270,
        "total_tokens": 1079212
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 25,
          "incorrect_count": 5,
          "partial_credit_count": 5,
          "zero_count": 0,
          "mean_score_0_to_4": 3.6666666666666665,
          "score_percent": 91.66666666666666,
          "score_distribution": {
            "1": 2,
            "2": 1,
            "3": 2,
            "4": 25
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 28,
          "incorrect_count": 2,
          "partial_credit_count": 2,
          "zero_count": 0,
          "mean_score_0_to_4": 3.8666666666666667,
          "score_percent": 96.66666666666667,
          "score_distribution": {
            "1": 1,
            "3": 1,
            "4": 28
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 26,
          "incorrect_count": 4,
          "partial_credit_count": 4,
          "zero_count": 0,
          "mean_score_0_to_4": 3.8,
          "score_percent": 95.0,
          "score_distribution": {
            "1": 1,
            "3": 3,
            "4": 26
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 11,
          "incorrect_count": 9,
          "partial_credit_count": 9,
          "zero_count": 0,
          "mean_score_0_to_4": 3.1,
          "score_percent": 77.5,
          "score_distribution": {
            "1": 2,
            "2": 5,
            "3": 2,
            "4": 11
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 11,
          "incorrect_count": 9,
          "partial_credit_count": 9,
          "zero_count": 0,
          "mean_score_0_to_4": 3.1,
          "score_percent": 77.5,
          "score_distribution": {
            "1": 3,
            "2": 3,
            "3": 3,
            "4": 11
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 11,
          "incorrect_count": 9,
          "partial_credit_count": 9,
          "zero_count": 0,
          "mean_score_0_to_4": 3.15,
          "score_percent": 78.75,
          "score_distribution": {
            "1": 2,
            "2": 4,
            "3": 3,
            "4": 11
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Its **intrinsic gain approximately doubles** under the usual long-channel assumptions. Doubling both width and length leaves \\(W/L\\)—and thus \\(g_m\\) at the same bias—roughly unchanged. The longer channel reduces channel-length modulation, making \\(r_o\\) roughly twice as large, so \\(g_m r_o\\) doubles. Real short-channel devices may not follow this scaling exactly.",
        "format": "markdown",
        "sha256": "d6bca7af885ab5d2d4da8a032ada1e5ceb56197767e17706f982941e448b27f5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: doubling both dimensions preserves W/L and gm, while the longer channel roughly doubles ro under the usual long-channel assumptions.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 602,
        "total_tokens": 628,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 513,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 602,
        "total_tokens": 628,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 513,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain \\(g_m r_o\\) **approximately doubles**, assuming the same bias and \\(\\lambda \\propto 1/L\\). Doubling both dimensions leaves \\(W/L\\)—and thus \\(g_m\\)—roughly unchanged, while doubling \\(L\\) roughly doubles \\(r_o\\).",
        "format": "markdown",
        "sha256": "1e833d56f0e62283cdf787f8d124a267d9e9db0b4f4d13364c7c2f5222b55552"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling both dimensions leaves W/L and gm approximately unchanged, while increased L roughly doubles ro and thus intrinsic gain, under the stated bias and lambda assumptions.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 586,
        "total_tokens": 612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 586,
        "total_tokens": 612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Its intrinsic gain **approximately doubles**, assuming the MOSFET remains in saturation at the same bias. Doubling both dimensions keeps \\(W/L\\) unchanged, so \\(g_m\\) stays about the same; the longer channel roughly doubles \\(r_o\\). Thus \\(g_m r_o\\) doubles.",
        "format": "markdown",
        "sha256": "de6b1aeba5afba1c59a75de696f9532b595f0f891ebd5df64056caaef38bdd9e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correct: with W/L and bias unchanged, gm and drain current are approximately constant while the longer channel roughly doubles ro, so intrinsic gain approximately doubles.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 585,
        "total_tokens": 611,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 585,
        "total_tokens": 611,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends on what is held constant. For a **fixed MOSFET in saturation**, \\(g_m=\\mu C_{\\rm ox}(W/L)V_{\\rm OV}\\), so transconductance rises with overdrive voltage: **Student A** is correct.\n\nIf instead the **drain current is held constant** while the device size is changed, \\(g_m=2I_D/V_{\\rm OV}\\), so it falls: **Student B** is correct under that different assumption.",
        "format": "markdown",
        "sha256": "16b5dd0b80f93012f9789079aa53b53b122c1254946acc3304a04c2c4594d28e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that for a fixed MOSFET, increasing overdrive raises gm, and explains Student B’s result applies only when drain current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 902,
        "total_tokens": 940,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 902,
        "total_tokens": 940,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Both can be correct, depending on what is held constant.** For a MOSFET in saturation under the long-channel model,\n\n\\[\ng_m=\\mu C_{\\rm ox}\\frac{W}{L}V_{\\rm OV}\n=\\frac{2I_D}{V_{\\rm OV}}.\n\\]\n\nFor the **same transistor**, increasing overdrive voltage increases \\(g_m\\), so Student A is right. If **drain current is held constant** while the transistor size changes, increasing overdrive voltage decreases \\(g_m\\), so Student B is right.",
        "format": "markdown",
        "sha256": "0f306f8861c3131db4dfe9be6af1e00dc40590f72ed39e0bebb8875b2fdb3001"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed transistor size, where increasing overdrive increases gm, and explains Student B’s result applies only at fixed drain current with size changed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 639,
        "total_tokens": 677,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 639,
        "total_tokens": 677,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the **same MOSFET operating in saturation**, Student A is correct: \\(g_m=\\mu C_{\\mathrm{ox}}(W/L)V_{\\mathrm{ov}}\\), so transconductance rises with overdrive voltage.\n\nStudent B’s statement applies **if drain current is held constant while device sizing changes**: then \\(g_m=2I_D/V_{\\mathrm{ov}}\\), which falls as overdrive increases. Those two comparisons hold different things constant.",
        "format": "markdown",
        "sha256": "ff1e34269b2076639b8069e0b3eadf55183ef0cfa06427fd82cd7b0d542055cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size and explains that Student B’s decreasing-g_m comparison assumes fixed drain current while sizing changes.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 958,
        "total_tokens": 996,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 857,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 958,
        "total_tokens": 996,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 857,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "They have the **same small-signal form**—a transconductance source, an output resistance \\(r_o\\), and optionally body-effect and capacitance terms—but their bias polarities are reversed. An NMOS current source is commonly written \\(g_m v_{gs}\\) from drain to source; a PMOS source is commonly written \\(g_m v_{sg}\\) from source to drain. The parameter values generally differ, too.",
        "format": "markdown",
        "sha256": "825221b0c365ac609e6f898fc2fcb2560c2f3586ecd23971ad1b6be939315f5c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS model has the same small-signal form as the NMOS, with reversed polarity conventions; this meets the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1392,
        "total_tokens": 1418,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1296,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1392,
        "total_tokens": 1418,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1296,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "They have the **same basic form**, but not the same polarity or parameter values. Both models include a transconductance-controlled current source and a drain–source resistance \\(r_o\\). Using positive drive voltages, the NMOS current source is \\(g_m v_{gs}\\) from drain to source; the PMOS current source is \\(g_m v_{sg}\\) from source to drain. Their \\(g_m\\) and \\(r_o\\) values also generally differ.",
        "format": "markdown",
        "sha256": "7af495744f6ef32168d3cda81f7c5f3836545e580741a71cc60840100ec370ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS model has the same basic form as the NMOS model and notes the reversed polarity conventions; this satisfies the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1323,
        "total_tokens": 1349,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1218,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1323,
        "total_tokens": 1349,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1218,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "They have the **same small-signal circuit form**, but not necessarily the same parameter values. With the usual conventions, the PMOS uses \\(v_{sg}\\) and a source-to-drain controlled current, while the NMOS uses \\(v_{gs}\\) and a drain-to-source controlled current. Both can include \\(g_m\\), \\(r_o\\), and a body-effect term.",
        "format": "markdown",
        "sha256": "961f25305db7bddc9c4d212512116fe239a9be696719ae1979374e641cbe3ca3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS model has the same small-signal form and appropriately notes the polarity conventions and analogous parameters.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1587,
        "total_tokens": 1613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1500,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 1587,
        "total_tokens": 1613,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1500,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The gate and drain of \\(M_1\\) are tied together, so \\(V_{GS}=V_{DS}=V_X\\). The NMOS is off until \\(V_X\\) reaches its threshold voltage \\(V_T\\); above threshold, it is in saturation. Neglecting channel-length modulation,\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\le V_T,\\\\[2mm]\n\\dfrac{1}{2}k_n(V_X-V_T)^2, & V_X>V_T.\n\\end{cases}\n\\]\n\nThus, sketch a horizontal line at \\(I_X=0\\) up to \\(V_T\\), followed by an upward-curving parabola.",
        "format": "markdown",
        "sha256": "b302818ad66387f46f3a1c46618c559695b68b6fedd114d97196cf8ebd9b5df4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its cutoff below threshold and saturation above threshold, and gives the required quadratic rise in IX.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 1189,
        "total_tokens": 2395,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1206,
        "output_tokens": 1189,
        "total_tokens": 2395,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The gate and drain are tied to \\(V_X\\), while the source is grounded. Thus \\(V_{GS}=V_{DS}=V_X\\), and the NMOS is in saturation whenever it is on. For an ideal transistor,\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\le V_{Tn},\\\\[2mm]\n\\dfrac{1}{2}\\mu_n C_{\\mathrm{ox}}\\dfrac WL\n(V_X-V_{Tn})^2, & V_X>V_{Tn}.\n\\end{cases}\n\\]\n\nSo the sketch is flat at zero up to \\(V_{Tn}\\), then rises as an upward-curving parabola:\n\n```text\n I_X\n  ↑                          ╱\n  │                       _╱\n  │                   __╱\n  │              ___╱\n  └────────┬────●────────────────→ V_X\n           0   V_Tn\n```",
        "format": "markdown",
        "sha256": "ef94d0e3d7daf8ebb5f64a4c74b170bd77ed1ee0754c00e3cf21588629d23dab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its saturation operation when on, and the zero-below-threshold, quadratic-above-threshold current characteristic.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 3832,
        "total_tokens": 5038,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 3832,
        "total_tokens": 5038,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The gate and drain are tied together, so \\(V_{GS}=V_{DS}=V_X\\). The NMOS is off until \\(V_X\\) reaches its threshold voltage; above threshold it is in saturation.\n\n\\[\nI_X \\approx\n\\begin{cases}\n0, & V_X\\le V_{TN},\\\\[4pt]\n\\dfrac{1}{2}\\mu_n C_{\\rm ox}\\dfrac{W}{L}(V_X-V_{TN})^2,\n& V_X>V_{TN}.\n\\end{cases}\n\\]\n\nThus, sketch \\(I_X\\) as zero up to \\(V_{TN}\\), then rising **quadratically** with \\(V_X\\) (assuming an ideal MOSFET and neglecting channel-length modulation).",
        "format": "markdown",
        "sha256": "2a54eeeb551992eea07addfb8196687c2051224ab978fd6416531699cff2cf5f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its off region below threshold, and the quadratic saturation-current rise above threshold, matching the full-credit rule.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 2238,
        "total_tokens": 3444,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1203,
        "input_tokens": 1206,
        "output_tokens": 2238,
        "total_tokens": 3444,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Since \\(V_{GS}=V_X\\) and \\(V_{DS}=1\\,\\text{V}\\), the ideal nMOS current is zero below threshold, rises quadratically, then rises linearly:\n\n\\[\nI_X \\approx\n\\begin{cases}\n0, & V_X\\le V_T,\\\\[2pt]\n\\dfrac{\\beta}{2}(V_X-V_T)^2,\n    & V_T<V_X<V_T+1\\,\\text{V},\\\\[5pt]\n\\beta\\!\\left[(V_X-V_T)(1\\,\\text{V})-\\dfrac{(1\\,\\text{V})^2}{2}\\right],\n    & V_X\\ge V_T+1\\,\\text{V},\n\\end{cases}\n\\]\n\nwhere \\(\\beta=\\mu_nC_{\\rm ox}W/L\\). Thus, sketch a flat line at \\(I_X=0\\) up to \\(V_T\\), a smoothly rising parabola up to \\(V_T+1\\,\\text{V}\\), and a straight rising line thereafter.",
        "format": "markdown",
        "sha256": "134d13492199fdc3408f8f4bda8fc8b45a185815ef563c6ac258ebc90e187e11"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions, with the appropriate current expressions and the quadratic-to-linear trend.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 3267,
        "total_tokens": 4636,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3033,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1369,
        "output_tokens": 3267,
        "total_tokens": 4636,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3033,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The NMOS has \\(V_{GS}=V_X\\) and a fixed \\(V_{DS}=1\\,\\text{V}\\). Thus the supply current \\(I_X\\) is zero until \\(V_X\\) reaches the threshold voltage \\(V_T\\). It then rises quadratically, becoming approximately linear when \\(V_X=V_T+1\\,\\text{V}\\):\n\n```text\nI_X\n ↑\n │                                /  linear (triode)\n │                             /\n │                         _.-'\n │                    _.-'       quadratic (saturation)\n │_______________.--'________________________→ V_X\n                V_T       V_T + 1 V\n```\n\nFor an ideal long-channel MOSFET, with \\(k_n=\\mu_n C_{\\rm ox}W/L\\),\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\le V_T,\\\\[2pt]\n\\dfrac{k_n}{2}(V_X-V_T)^2, & V_T<V_X\\le V_T+1\\,\\text{V},\\\\[5pt]\nk_n\\!\\left[(V_X-V_T)(1\\,\\text{V})-\\dfrac{(1\\,\\text{V})^2}{2}\\right],\n& V_X>V_T+1\\,\\text{V}.\n\\end{cases}\n\\]",
        "format": "markdown",
        "sha256": "fd46e0b9bcf8baa5d6ec3b93b87abf6dac9ab22297c2d125df79c191cdfa76da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the fixed 1 V drain-source voltage and gives the zero, saturation-quadratic, and triode-approximately-linear regions with the correct transition at V_X = V_T + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 2361,
        "total_tokens": 3730,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 2361,
        "total_tokens": 3730,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Since \\(V_{GS}=V_X\\) and \\(V_{DS}=1\\,\\text{V}\\), the nMOS transistor is off below threshold. Above threshold, \\(I_X\\) first rises quadratically; once \\(V_X\\ge V_T+1\\,\\text{V}\\), it rises linearly.\n\n```text\n I_X\n  ↑\n  │                              /  linear\n  │                           __/\n  │                       _.-´\n  │                   _.-´       quadratic\n  │_______________.-´\n  └───────────────┬──────────┬────────────→ V_X\n                 V_T      V_T + 1 V\n```\n\nUsing the ideal square-law model, with \\(k_n=\\mu_nC_{\\rm ox}W/L\\),\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\le V_T,\\\\[2pt]\n\\dfrac{k_n}{2}(V_X-V_T)^2, & V_T<V_X<V_T+1\\,\\text{V},\\\\[6pt]\nk_n\\!\\left[(1\\,\\text{V})(V_X-V_T)-\\dfrac{(1\\,\\text{V})^2}{2}\\right],\n& V_X\\ge V_T+1\\,\\text{V}.\n\\end{cases}\n\\]",
        "format": "markdown",
        "sha256": "9263a2e3434f071f3d7e31b2a1588fa92c6959a955a4b6be4240568396765c1a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the off, saturation, and triode regions, with the quadratic rise up to \\(V_T+1\\,\\text{V}\\) and roughly linear rise beyond it. The equations and sketch match the ideal square-law model.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 1326,
        "total_tokens": 2695,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1366,
        "input_tokens": 1369,
        "output_tokens": 1326,
        "total_tokens": 2695,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The gate and drain of \\(M_1\\) are grounded, so the pMOS is diode-connected. Its source voltage sets \\(V_{SG}\\), and therefore sets \\(I_X\\). The current changes with the voltage at the upper terminal rather than remaining constant, so this connection acts as a nonlinear load, not a current source.",
        "format": "markdown",
        "sha256": "1a11f485deec19e00016e5fdeebab468d275aecde6ccf6875964aef06134cb05"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the grounded gate and drain, the pMOS, and why its current varies with terminal voltage. It does not explicitly identify the diode-connected device’s low small-signal impedance (about 1/gm), required for full credit.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 2455,
        "total_tokens": 2955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2378,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 2455,
        "total_tokens": 2955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2378,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. \\(M_1\\) is a **diode-connected pMOS**: its gate and drain are both grounded. Changing the voltage at the upper terminal changes \\(V_{SG}\\), and therefore changes \\(I_X\\). It behaves as a nonlinear load, not a constant-current source.",
        "format": "markdown",
        "sha256": "42e416d463103dbbcd67da8dbad0239c9138406a06bef6d52d64b474066892e4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the diode-connected pMOS and concludes it is not a current source, but does not state the key low-impedance behavior (about 1/gm).",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 2518,
        "total_tokens": 3018,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2451,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 2518,
        "total_tokens": 3018,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2451,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The PMOS has its gate and drain grounded, so it is **diode-connected**. The upper terminal is its source: changing that terminal’s voltage changes \\(V_{SG}\\) and therefore \\(I_X\\). It may conduct, but it does not provide an approximately constant current.",
        "format": "markdown",
        "sha256": "abc50615c31405ab6e4de7f61e9466b84bec9b4f8559d5fa41028043564d1dd4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the PMOS, its diode connection, and why its current varies with terminal voltage, but omits the key low-impedance (about 1/gm) explanation required for full credit.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 2967,
        "total_tokens": 3467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2900,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 500,
        "output_tokens": 2967,
        "total_tokens": 3467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2900,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) is a **p-channel MOSFET**. With its source connected to \\(V_{DD}\\) through \\(R_S\\) and its drain connected to ground through \\(R_D\\), this is a source-degenerated common-source amplifier.\n\nLet \\(I_D\\) denote the current flowing from source to drain. Its DC voltages are\n\\[\nV_S=V_{DD}-I_D R_S,\\qquad V_{\\text{out}}=I_D R_D.\n\\]\nIf the transistor is in saturation, neglecting body effect and channel-length modulation,\n\\[\nI_D \\simeq \\frac{\\beta_p}{2}\n\\left(V_{DD}-I_D R_S-V_{\\text{in}}-|V_{Tp}|\\right)^2,\n\\]\nprovided \\(V_{SG}>|V_{Tp}|\\) and \\(V_{SD}\\ge V_{SG}-|V_{Tp}|\\). If the transistor is off, \\(I_D\\simeq0\\) and \\(V_{\\text{out}}\\simeq0\\).\n\nFor small signals about a saturation-region bias point, the voltage gain is\n\\[\n\\boxed{A_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n\\simeq-\\frac{g_mR_D}{1+g_mR_S}}.\n\\]\nThus a rising input reduces the PMOS current and lowers the output voltage. \\(R_S\\) provides negative feedback: it reduces gain but improves bias stability and linearity.\n\nThe ideal gate has very high input resistance, and, neglecting transistor output resistance, \\(R_{\\text{out}}\\simeq R_D\\). If the transistor’s \\(r_o\\) matters, the gain becomes\n\\[\nA_v=-\\frac{g_m r_o R_D}\n{r_o+R_D+R_S(1+g_m r_o)}.\n\\]",
        "format": "markdown",
        "sha256": "126fa0c27905bc1aacb64481541e735ed8410a5303f3d26ca58c08226aeba519"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS source-degenerated common-source stage and gives the inverting gain \\(-g_mR_D/(1+g_mR_S)\\). The additional DC and finite-\\(r_o\\) discussion is consistent with the circuit.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 4540,
        "total_tokens": 5966,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4132,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 4540,
        "total_tokens": 5966,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4132,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) is a **pMOS common-source transistor** with source degeneration \\(R_S\\) and a drain load \\(R_D\\). Let \\(I_D\\) be the current flowing from \\(V_{DD}\\) through \\(M_1\\) and \\(R_D\\). Then\n\\[\nV_S=V_{DD}-I_D R_S,\\qquad\nV_{\\text{out}}=I_D R_D,\\qquad\nV_{SG}=V_{DD}-I_D R_S-V_{\\text{in}}.\n\\]\n\nAssuming a fixed threshold magnitude \\(|V_{TP}|\\), the transistor is off when \\(V_{\\text{in}}\\ge V_{DD}-|V_{TP}|\\); then \\(I_D=0\\) and \\(V_{\\text{out}}=0\\). Lowering \\(V_{\\text{in}}\\) turns it on, increasing \\(I_D\\) and \\(V_{\\text{out}}\\). Thus the circuit **inverts**.\n\nIf \\(M_1\\) is in saturation, its DC operating point satisfies\n\\[\nI_D=\\frac{\\beta_p}{2}\n\\bigl(V_{DD}-I_D R_S-V_{\\text{in}}-|V_{TP}|\\bigr)^2,\n\\qquad\nV_{\\text{out}}\\le V_{\\text{in}}+|V_{TP}|.\n\\]\nIf the inequality fails, \\(M_1\\) is in the triode region instead.\n\nFor small signals about a saturation-region operating point, neglecting transistor output resistance,\n\\[\n\\boxed{\\displaystyle\nA_v=\\frac{dv_{\\text{out}}}{dv_{\\text{in}}}\n=-\\frac{g_m R_D}{1+g_m R_S}.}\n\\]\n\\(R_S\\) provides negative feedback: it reduces gain magnitude but stabilizes the operating point and improves linearity. The MOS gate draws essentially no DC input current.",
        "format": "markdown",
        "sha256": "47c240070f7ea77766aa2efa367b81e19a95956351214e63d71f3d9c8b23f971"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain \\(-g_mR_D/(1+g_mR_S)\\). The additional DC and saturation conditions are consistent with the stated topology.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 5881,
        "total_tokens": 7307,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 5881,
        "total_tokens": 7307,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5466,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) is a **p-channel MOSFET** in a common-source circuit. Its source is connected to \\(V_{DD}\\) through \\(R_S\\), and its drain—the output—is connected to ground through \\(R_D\\).\n\nLet \\(I\\) be the current through both resistors. Then\n\\[\nV_S=V_{DD}-IR_S,\\qquad V_{\\text{out}}=IR_D,\\qquad\nV_{SG}=V_{DD}-IR_S-V_{\\text{in}}.\n\\]\nIf \\(V_{\\text{in}}\\ge V_{DD}-|V_{TP}|\\), the MOSFET is off and \\(V_{\\text{out}}\\approx0\\). Lowering \\(V_{\\text{in}}\\) turns it on, increases \\(I\\), and raises \\(V_{\\text{out}}\\): the circuit is **inverting**.\n\nFor a bias point in MOSFET saturation, neglecting channel-length modulation, its small-signal voltage gain is\n\\[\n\\boxed{\\displaystyle A_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n\\approx-\\frac{g_mR_D}{1+g_mR_S}.}\n\\]\nThus \\(R_S\\) provides source degeneration: it stabilizes the current but reduces the gain. This gain formula applies around a saturation-region bias point; when the MOSFET is strongly on, it can instead enter the triode region.",
        "format": "markdown",
        "sha256": "f8972ad987d7f1298fdf54a0ff129c3ce2a44a62f367425e836d481effd9bf30"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration, gives the inverting gain, and describes the signal trend consistently. The operating-point caveat does not undermine the essential answer.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 3937,
        "total_tokens": 5363,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1423,
        "input_tokens": 1426,
        "output_tokens": 3937,
        "total_tokens": 5363,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower** (common-drain stage). The resistor pulls the output toward ground, while \\(M_1\\) supplies current from \\(V_{DD}\\) as the input rises. Its output is noninverting but does not quite reach the input voltage.\n\nWith no other load,\n\\[\nI_D \\simeq \\frac{V_{\\text{out}}}{R_S},\n\\qquad\nV_{GS}=V_{\\text{in}}-V_{\\text{out}}.\n\\]\nIf \\(V_{\\text{in}}\\leq V_T\\), the transistor is off and \\(V_{\\text{out}}\\approx0\\). When it is on and in saturation, neglecting body effect and channel-length modulation,\n\\[\n\\frac{V_{\\text{out}}}{R_S}\n=\\frac{\\beta}{2}\\bigl(V_{\\text{in}}-V_{\\text{out}}-V_T\\bigr)^2.\n\\]\nThus the output *follows* the input at approximately \\(V_{\\text{in}}-V_{GS}\\); \\(R_S\\) determines the current and therefore the precise voltage difference.\n\nFor small signals around an operating point,\n\\[\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n\\approx\\frac{g_mR_S}{1+g_mR_S}.\n\\]\nThe gain is positive and less than one, approaching one when \\(g_mR_S\\) is large. The gate gives a very high input resistance, and the output resistance is approximately \\(R_S\\parallel(1/g_m)\\).",
        "format": "markdown",
        "sha256": "ea7b6cc573d19d14b2a92b130c8e614e5a222011bf6258782a3a9b4c31389ad9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, along with appropriate operating-point and output-resistance details.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 3451,
        "total_tokens": 4600,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1149,
        "output_tokens": 3451,
        "total_tokens": 4600,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower** (common-drain amplifier). The gate receives \\(V_{\\text{in}}\\), while the output is taken from the source. The resistor \\(R_S\\) sets the source—and therefore drain—current.\n\nIgnoring body effect and channel-length modulation, when \\(M_1\\) is on and saturated,\n\\[\nI_D=\\frac{V_{\\text{out}}}{R_S}\n=\\frac{\\beta}{2}\\bigl(V_{\\text{in}}-V_{\\text{out}}-V_T\\bigr)^2,\n\\qquad \\beta=\\mu_n C_{\\rm ox}\\frac WL.\n\\]\nThus \\(V_{\\text{out}}=V_{\\text{in}}-V_{GS}\\): the output follows the input but sits below it by the gate-to-source voltage. If \\(V_{\\text{in}}\\le V_T\\), the transistor is off and \\(V_{\\text{out}}\\approx0\\). Saturation requires \\(V_{DD}-V_{\\text{out}}\\ge V_{GS}-V_T\\).\n\nFor small signals about an on-state operating point,\n\\[\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n   \\approx\\frac{g_mR_S}{1+g_mR_S}.\n\\]\nThe gain is **positive and less than one**, approaching unity when \\(g_mR_S\\gg1\\). The MOS gate gives a very high input resistance; the output resistance is approximately \\(R_S\\parallel(1/g_m)\\). Consequently, this stage is primarily a **voltage buffer**, not a voltage-gain amplifier.",
        "format": "markdown",
        "sha256": "a74f035d49670003aa1cfdfc069616e88a86061ae8086a159c6264f4eeaf9b2e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, sub-unity gain expression. The operating-point and output-resistance details are also consistent with the topology.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 2939,
        "total_tokens": 4088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 2939,
        "total_tokens": 4088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower** (common-drain amplifier). The drain is tied to \\(V_{DD}\\), the gate receives \\(V_{\\text{in}}\\), and the source is the output. The resistor \\(R_S\\) sets the transistor’s current.\n\nWith negligible gate current,\n\\[\nI_D=\\frac{V_{\\text{out}}}{R_S},\n\\qquad\nV_{GS}=V_{\\text{in}}-V_{\\text{out}}.\n\\]\nIf \\(V_{\\text{in}}\\) is below the threshold voltage, \\(M_1\\) is off and \\(V_{\\text{out}}\\approx0\\). When it is on and in saturation, a simple square-law model gives\n\\[\n\\frac{V_{\\text{out}}}{R_S}\n=\\frac{\\beta}{2}\\bigl(V_{\\text{in}}-V_{\\text{out}}-V_T\\bigr)^2,\n\\quad \\beta=\\mu_n C_{\\rm ox}\\frac WL.\n\\]\nThus \\(V_{\\text{out}}=V_{\\text{in}}-V_{GS}\\): the output rises with the input, but sits below it by the gate-to-source voltage needed to supply current through \\(R_S\\).\n\nFor small signals, neglecting body effect and transistor output conductance,\n\\[\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_mR_S}{1+g_mR_S}.\n\\]\nThe gain is **positive and less than one**, approaching one when \\(g_mR_S\\gg1\\). The input resistance is very high, while the output resistance is approximately \\(R_S\\parallel(1/g_m)\\). No numerical operating point can be found without \\(V_{\\text{in}}\\), \\(R_S\\), and the transistor parameters.",
        "format": "markdown",
        "sha256": "426d52ca2a147f4fada8cb87e420e75ae76e98e5167305d770a18a2a5ba34421"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain expression. The added output-resistance estimate is also correct.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 3872,
        "total_tokens": 5021,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3477,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1146,
        "input_tokens": 1149,
        "output_tokens": 3872,
        "total_tokens": 5021,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3477,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an nMOS transistor and \\(V_{DD}\\) is a steady supply, this is a **common-gate amplifier**: the signal enters at the source, the output is taken from the drain, and the gate is fixed at \\(V_{DD}\\).\n\nThe DC relationships are\n\\[\nV_{GS}=V_{DD}-V_{\\rm in},\\qquad\nV_{\\rm out}=V_{DD}-I_D R_D.\n\\]\nIncreasing \\(V_{\\rm in}\\) reduces \\(V_{GS}\\), so \\(I_D\\) decreases and \\(V_{\\rm out}\\) rises. The circuit is therefore **non-inverting**.\n\nIf \\(M_1\\) is biased in saturation, its approximate small-signal voltage gain is\n\\[\nA_v=\\frac{v_{\\rm out}}{v_{\\rm in}}\\approx +g_mR_D,\n\\]\nwith input resistance approximately \\(1/g_m\\) and output resistance approximately \\(R_D\\parallel r_o\\).\n\nOne important bias constraint follows from the gate being tied to \\(V_{DD}\\): saturation requires\n\\[\nV_{\\rm out}\\ge V_{DD}-V_T.\n\\]\nIf the drop across \\(R_D\\) exceeds \\(V_T\\), \\(M_1\\) enters the triode region and the saturation-region gain formula no longer applies.",
        "format": "markdown",
        "sha256": "f08202e77695de89f65976a877d9cb8872f6b438f8688d6921ffed64ef5f70d9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology, source input, non-inverting gain, and approximately 1/gm input resistance. The added bias constraint is also consistent with the stated connections.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3400,
        "total_tokens": 4516,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1116,
        "output_tokens": 3400,
        "total_tokens": 4516,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistor is an **nMOS common-gate stage**: the gate is fixed at \\(V_{DD}\\), the input drives the source, and the output is taken from the drain.\n\nFor a DC input bias \\(V_{\\rm in}\\),\n\\[\nV_{GS}=V_{DD}-V_{\\rm in},\\qquad\nV_{\\rm out}=V_{DD}-I_D R_D.\n\\]\nRaising \\(V_{\\rm in}\\) reduces \\(V_{GS}\\) and hence \\(I_D\\), so the drop across \\(R_D\\) decreases and \\(V_{\\rm out}\\) rises. The stage is **noninverting**.\n\nFor small signals, assuming the transistor is biased on and \\(V_{DD}\\) is an AC ground,\n\\[\n\\frac{v_{\\rm out}}{v_{\\rm in}}\n=(g_m+1/r_o)(R_D\\parallel r_o)\n\\;\\approx\\;g_mR_D\n\\quad\\text{if }r_o\\gg R_D.\n\\]\nIts input resistance is approximately \\(1/g_m\\); with the input voltage source set to zero, its output resistance is \\(R_D\\parallel r_o\\).\n\n**Bias matters:** saturation requires \\(V_{\\rm out}\\ge V_{DD}-V_T\\), equivalently \\(I_DR_D\\le V_T\\). Otherwise the transistor operates in the triode region, so the usual saturation-based gain estimate is not applicable. Numerical results require the input bias and transistor parameters.",
        "format": "markdown",
        "sha256": "f87fd0421225533996f1bc77a6817a62195881a71f0fa1f714f0815fc4b00a8b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology, noninverting gain, and approximately 1/gm input resistance. Its finite-ro gain expression and bias-region discussion are consistent with the circuit.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 6016,
        "total_tokens": 7132,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 6016,
        "total_tokens": 7132,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) is an **NMOS common-gate stage**: its gate is fixed at \\(V_{DD}\\), the input drives its source, and the output is taken from its drain through \\(R_D\\).\n\n\\[\nV_{GS}=V_{DD}-V_{\\text{in}},\\qquad\nV_{\\text{out}}=V_{DD}-I_D R_D.\n\\]\n\nRaising \\(V_{\\text{in}}\\) reduces \\(V_{GS}\\) and the drain current. The voltage drop across \\(R_D\\) therefore decreases, so \\(V_{\\text{out}}\\) rises. The stage is **noninverting**.\n\nIf the NMOS is biased in saturation, its approximate small-signal voltage gain is\n\n\\[\n\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n\\approx +g_m(R_D\\parallel r_o)\n\\approx +g_mR_D\\quad\\text{if }r_o\\gg R_D.\n\\]\n\nIts input resistance is approximately \\(1/g_m\\), and its output resistance is approximately \\(R_D\\parallel r_o\\). These amplifier results require a suitable bias point: with the gate at \\(V_{DD}\\), saturation requires \\(V_{\\text{out}}\\ge V_{DD}-V_T\\). If \\(V_{\\text{in}}\\ge V_{DD}-V_T\\), the transistor is off and \\(V_{\\text{out}}\\approx V_{DD}\\); if the output falls below the saturation limit, the transistor operates in triode instead.",
        "format": "markdown",
        "sha256": "977992f27a9e883b047abfaa6db634cb62d57eecd183c2db920390523ef80a20"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology and source input, gives the noninverting gain and approximately 1/gm input resistance, and its added bias-region conditions are consistent with the circuit.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 5901,
        "total_tokens": 7017,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1113,
        "input_tokens": 1116,
        "output_tokens": 5901,
        "total_tokens": 7017,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As drawn, this circuit does **not** amplify \\(V_{\\text{in}}\\). The node to the right of \\(C_1\\) is connected directly to ground, so the capacitor connects the input source to ground rather than applying a signal to \\(M_1\\).\n\nThe MOSFET’s source is grounded and its gate is held at \\(V_b\\). Thus \\(V_{GS}=V_b\\) is independent of \\(V_{\\text{in}}\\), and the output has **zero small-signal gain from the input**. Its DC value is set by the gate bias and drain resistor:\n\\[\nV_{\\text{out}}=V_{DD}-I_D R_D.\n\\]\nFor an NMOS, \\(I_D\\approx 0\\) and \\(V_{\\text{out}}\\approx V_{DD}\\) if \\(V_b\\) is below threshold; otherwise \\(I_D\\) depends on the MOSFET’s operating region.\n\nIf a common-gate amplifier was intended, the source must not be shorted to ground; it needs an appropriate DC bias path while \\(C_1\\) couples the input signal to it.",
        "format": "markdown",
        "sha256": "0b368160170ffffbbf25d604331e39f2e88710b41a3c356ae18f1bcd96e60a17"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source node is shorted to ground, so the input cannot produce a source signal and the ideal small-signal gain is zero. The additional bias discussion does not undermine the conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 1797,
        "total_tokens": 3534,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 1797,
        "total_tokens": 3534,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As drawn, the lower terminal of \\(M_1\\) and the right side of \\(C_1\\) are **directly grounded**. Thus \\(C_1\\) connects \\(V_{\\text{in}}\\) to ground, not to a signal-bearing transistor node. The gate remains at \\(V_b\\), so changing \\(V_{\\text{in}}\\) cannot change the transistor’s gate-to-source voltage.\n\nWith ideal supplies and ground, the output has no input-dependent signal:\n\\[\n\\frac{\\tilde V_{\\text{out}}}{\\tilde V_{\\text{in}}}=0.\n\\]\nIts DC level is set by the transistor bias and \\(R_D\\): \\(V_{\\text{out},Q}=V_{DD}-I_{D,Q}R_D\\). Meanwhile, the input source simply drives the capacitor, with \\(i_{\\text{in}}=C_1\\,dV_{\\text{in}}/dt\\).\n\nIf the intent was a common-gate amplifier, the direct ground connection at the input-side transistor terminal must be removed and an appropriate DC bias path provided.",
        "format": "markdown",
        "sha256": "970a478450dda8f9e7bcd34cd54418e393b3558d76e8d20a23170a226482aa50"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source/input node is hard-shorted to ground and concludes that the ideal input-to-output gain is zero. The additional bias and capacitor observations do not detract.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 3343,
        "total_tokens": 5080,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 3343,
        "total_tokens": 5080,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As drawn, \\(M_1\\)’s source is **directly grounded**. The input is coupled through \\(C_1\\) to that same grounded node, so \\(V_{\\text{in}}\\) cannot change the source or gate voltage. It drives current through \\(C_1\\) to ground instead.\n\nThe DC output is set by the gate bias and drain resistor:\n\\[\nV_{\\text{out}}=V_{DD}-I_D R_D.\n\\]\nWith a fixed \\(V_b\\) and ideal components, \\(I_D\\) does not vary with \\(V_{\\text{in}}\\). Thus the small-signal gain is\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{v_{\\text{in}}}=0.}\n\\]\n\nTo make this a common-gate amplifier, the source’s direct connection to ground would need to be removed and replaced with a suitable DC-bias path.",
        "format": "markdown",
        "sha256": "07ee2cbb341b9115ef94280f227c09ffe85e899da7cf5ad3f623a5b791e79d5f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source is hard-shorted to ground, so the input produces no small-signal output and the ideal voltage gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 2269,
        "total_tokens": 4006,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1734,
        "input_tokens": 1737,
        "output_tokens": 2269,
        "total_tokens": 4006,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Two poles.** The gate and drain are the two independent capacitive nodes. The source is grounded, so \\(C_{SB}\\) is shorted and does not add a pole.",
        "format": "markdown",
        "sha256": "b57af66d81d94cc03807d89c25f52f82f8b66f479906e5842165c8cf623cdba1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and explains that CSB is shorted because the source is grounded, so it contributes no independent energy storage.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 643,
        "total_tokens": 2615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 598,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1972,
        "output_tokens": 643,
        "total_tokens": 2615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 598,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Two poles.** The gate and drain are the only independent nodes that store charge; \\(C_{SB}\\) has both terminals at ground, so it adds no pole.",
        "format": "markdown",
        "sha256": "d1c61278def6597832f716d9b94b6fa2dd36737fd55e01373cd98c6660c3d277"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives two poles and notes that CSB is shorted because both terminals are grounded, satisfying the full-credit justification rule.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 401,
        "total_tokens": 2373,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 401,
        "total_tokens": 2373,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Two poles.** The gate and drain are the two independent capacitive nodes. The source is grounded, so \\(C_{SB}\\) does not add a pole.",
        "format": "markdown",
        "sha256": "ce8a1a61aeacdf9a574f739fd243c3fa93e42a089cb9278ab25a5b3d100840b3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives two poles and notes that the grounded source makes C_SB contribute no pole, accounting for the capacitor that is shorted out.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 713,
        "total_tokens": 2685,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 672,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1969,
        "input_tokens": 1972,
        "output_tokens": 713,
        "total_tokens": 2685,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 672,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **source-driven NMOS amplifier with negative voltage feedback**. The divider returns a fraction of the output to the gate:\n\\[\nv_F=\\beta v_{\\rm out},\\qquad \\beta=\\frac{R_2}{R_1+R_2}.\n\\]\nIf \\(v_{\\rm out}\\) rises, the gate voltage rises, increasing the drain current and the voltage drop across \\(R_D\\). That tends to pull \\(v_{\\rm out}\\) back down.\n\nAssume \\(M_1\\) is biased in saturation, and neglect body effect and \\(r_o\\). For small signals, let \\(R=R_D\\parallel(R_1+R_2)\\); the divider is also a load on the output. Drain-node KCL gives\n\\[\n\\frac{v_{\\rm out}}{R}+g_m(\\beta v_{\\rm out}-v_{\\rm in})=0,\n\\]\nso the **noninverting voltage gain** is\n\\[\n\\boxed{A_v=\\frac{v_{\\rm out}}{v_{\\rm in}}\n=\\frac{g_mR}{1+\\beta g_mR}}.\n\\]\nWhen the loop gain \\(\\beta g_mR\\gg1\\), this approaches\n\\[\n\\boxed{A_v\\approx\\frac1\\beta=1+\\frac{R_1}{R_2}}.\n\\]\nUnder the same assumptions, \\(R_{\\rm in}=1/g_m+\\beta R\\) and \\(R_{\\rm out}=R/(1+\\beta g_mR)\\), with the input held at AC ground when measuring \\(R_{\\rm out}\\).\n\nThe gain is a *small-signal* result, not a DC relation. The DC operating point must satisfy\n\\[\nV_G=\\beta V_{\\rm out},\\qquad\n\\frac{V_{DD}-V_{\\rm out}}{R_D}\n=I_D+\\frac{V_{\\rm out}}{R_1+R_2},\n\\]\nwith \\(V_{GS}=\\beta V_{\\rm out}-V_{\\rm in}>V_T\\) for \\(M_1\\) to conduct.",
        "format": "markdown",
        "sha256": "327cd1a84db7c41324c936a39fd44456f7626b010a36fe85a977715cd2dbbc7e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative feedback, and derives the correct noninverting closed-loop gain. The additional resistance and DC-bias discussion is consistent with the stated assumptions.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 9851,
        "total_tokens": 11450,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9393,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1599,
        "output_tokens": 9851,
        "total_tokens": 11450,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9393,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an NMOS biased in saturation, define\n\\[\n\\beta=\\frac{R_2}{R_1+R_2},\n\\qquad\nR=R_D\\parallel(R_1+R_2).\n\\]\nThe gate draws negligible current, so the feedback voltage is \\(v_F=\\beta v_{\\text{out}}\\). With \\(V_{DD}\\) treated as AC ground and transistor output resistance neglected, the output-node equation is\n\\[\n\\frac{v_{\\text{out}}}{R}\n+g_m\\bigl(\\beta v_{\\text{out}}-v_{\\text{in}}\\bigr)=0.\n\\]\nHence the small-signal gain is\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_mR}{1+\\beta g_mR}}.\n\\]\n\nThe gain is **positive**, and the feedback is **negative**: a rise in \\(v_{\\text{out}}\\) raises the gate voltage, increasing drain current and pulling \\(v_{\\text{out}}\\) back down. If \\(\\beta g_mR\\gg1\\), the gain approaches\n\\[\n\\frac{v_{\\text{out}}}{v_{\\text{in}}}\\approx\\frac1\\beta\n=1+\\frac{R_1}{R_2}.\n\\]\n\nFor DC bias, \\(V_G=\\beta V_O\\), \\(V_{GS}=\\beta V_O-V_I\\), and\n\\[\n\\frac{V_{DD}-V_O}{R_D}\n=I_D+\\frac{V_O}{R_1+R_2}.\n\\]\nThese equations must be combined with \\(M_1\\)’s current–voltage characteristic to find the operating point; the approximate gain above applies only while the transistor remains appropriately biased.",
        "format": "markdown",
        "sha256": "a54eb173e316ffe7a90f541adc9c747cf3a142e2bc2ac171c16f99d878039c19"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies source input, divider feedback to the gate, and negative feedback. The small-signal gain and its high-loop-gain limit are correct; the additional bias equations are consistent.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 10913,
        "total_tokens": 12512,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10514,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 10913,
        "total_tokens": 12512,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10514,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The \\(R_1\\)–\\(R_2\\) divider returns a fraction of the output voltage to the MOSFET gate. Neglecting gate current, define\n\\[\n\\beta=\\frac{R_2}{R_1+R_2},\\qquad v_F=\\beta v_{\\rm out}.\n\\]\nThe input drives the **source**, so the small-signal gate–source voltage is \\(v_{gs}=\\beta v_{\\rm out}-v_{\\rm in}\\).\n\nAssume \\(M_1\\) is biased on in saturation and initially neglect its output resistance. With \\(R_L=R_D\\parallel(R_1+R_2)\\), drain-node current balance gives\n\\[\n\\frac{v_{\\rm out}}{R_L}+g_m(\\beta v_{\\rm out}-v_{\\rm in})=0,\n\\]\nhence\n\\[\n\\boxed{\\frac{v_{\\rm out}}{v_{\\rm in}}\n=\\frac{g_mR_L}{1+g_m\\beta R_L}}.\n\\]\nThe gain is **noninverting**. The feedback is negative: an increase in \\(v_{\\rm out}\\) raises the gate voltage and drain current, tending to pull \\(v_{\\rm out}\\) back down. If \\(g_m\\beta R_L\\gg1\\), the small-signal gain approaches\n\\[\n\\boxed{A_v\\approx\\frac{1}{\\beta}=1+\\frac{R_1}{R_2}}.\n\\]\n\nThis is an *incremental* gain, not a DC relation. The DC operating point also depends on \\(V_{DD}\\) and the transistor characteristics; in particular, \\(R_D\\) supplies both the MOSFET drain current and the divider current.",
        "format": "markdown",
        "sha256": "b4ce60162f5eb1966535b9cf6fb8d209a830aad2896a7c0e569de42fa5d95720"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven input, divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain and high-loop-gain limit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 9999,
        "total_tokens": 11598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9620,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1596,
        "input_tokens": 1599,
        "output_tokens": 9999,
        "total_tokens": 11598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9620,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**This is an NMOS source follower (common-drain stage).** \\(M_2\\), biased by \\(V_b\\), acts as a current sink; \\(M_1\\) carries that current and makes \\(V_{\\text{out}}\\) follow \\(V_{\\text{in}}\\) with a positive voltage offset below it.\n\nAssuming both transistors are in saturation and neglecting body effect and channel-length modulation, let \\(\\beta_i=\\mu_n C_{\\mathrm{ox}}(W/L)_i\\). Equating their currents gives\n\\[\n\\frac{\\beta_1}{2}(V_{\\text{in}}-V_{\\text{out}}-V_{T1})^2\n=\n\\frac{\\beta_2}{2}(V_b-V_{T2})^2,\n\\]\nso\n\\[\n\\boxed{V_{\\text{out}}\\approx V_{\\text{in}}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{T2})}.\n\\]\nThus \\(V_b\\) sets the bias current and, consequently, the gate-to-source voltage drop of \\(M_1\\).\n\nFor small signals, with \\(V_b\\) and \\(V_{DD}\\) held constant,\n\\[\n\\boxed{A_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}<1}.\n\\]\nThe gain is positive and typically close to unity; \\(g_{mb1}=0\\) if \\(M_1\\)'s body is tied to its source. The MOS gate gives a very high DC input resistance, while the output resistance is approximately the reciprocal of the gain denominator.\n\nThese results require \\(M_2\\) to remain a current sink—particularly \\(V_b>V_{T2}\\) and \\(V_{\\text{out}}\\ge V_b-V_{T2}\\)—and \\(M_1\\) to remain on and in saturation.",
        "format": "markdown",
        "sha256": "7442113b2ef94d2328222a0a36234463d3ff456dba0d45c9a47fe79ae7eebcb4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as a current sink, and gives a positive gain slightly below unity with appropriate small-signal effects. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 2517,
        "total_tokens": 3741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 2517,
        "total_tokens": 3741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower**. \\(M_1\\) receives the input at its gate and delivers the output at its source; \\(M_2\\), biased by \\(V_b\\), acts as a current sink.\n\nAssuming both transistors are on and in saturation, and neglecting channel-length modulation and body effect,\n\n\\[\nI_B \\approx \\frac{\\beta_2}{2}(V_b-V_{T2})^2,\n\\qquad\nV_{\\text{out}}\\approx V_{\\text{in}}-V_{GS1}\n=V_{\\text{in}}-V_{T1}-\\sqrt{\\frac{2I_B}{\\beta_1}}.\n\\]\n\nThus the output **rises with the input**, but sits approximately one \\(V_{GS1}\\) below it. The input resistance is very high, and the output resistance is low.\n\nFor small signals, with \\(V_b\\) held fixed,\n\n\\[\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}\n\\lesssim 1.\n\\]\n\nHere \\(g_{mb1}=0\\) if \\(M_1\\)'s body is tied to its source. The follower approximation applies while \\(M_2\\) has \\(V_{\\text{out}}\\ge V_{OV2}\\) and \\(M_1\\) has \\(V_{DD}-V_{\\text{out}}\\ge V_{OV1}\\); outside that range, the response becomes nonlinear.",
        "format": "markdown",
        "sha256": "084fb00173bddd4f94ffaed340118d046a4ca0fdb8d1d27c735ea5cb85e69677"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as a current sink, with output at M1’s source and a positive, sub-unity gain. The small-signal expression and stated operating-region assumptions are consistent with the circuit.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 2938,
        "total_tokens": 4162,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 2938,
        "total_tokens": 4162,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower**. \\(M_1\\) has its drain at \\(V_{DD}\\) and its source at \\(V_{\\text{out}}\\); \\(M_2\\), biased by \\(V_b\\), acts as a current sink. Thus the output rises when \\(V_{\\text{in}}\\) rises, but sits approximately one \\(V_{GS1}\\) below it.\n\nAssuming no output load, both transistors are in saturation, and body effect and channel-length modulation are negligible, their currents are equal:\n\n\\[\n\\frac{\\beta_1}{2}(V_{\\text{in}}-V_{\\text{out}}-V_{T1})^2\n=\n\\frac{\\beta_2}{2}(V_b-V_{T2})^2.\n\\]\n\nHence\n\n\\[\n\\boxed{V_{\\text{out}}\\approx V_{\\text{in}}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{T2})}.\n\\]\n\nFor matched transistors, this simplifies to \\(V_{\\text{out}}\\approx V_{\\text{in}}-V_b\\). Its small-signal voltage gain is positive and close to one:\n\n\\[\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n\\approx\n\\frac{g_{m1}}{g_{m1}+g_{mb1}+r_{o1}^{-1}+r_{o2}^{-1}},\n\\]\n\nwhere \\(g_{mb1}\\) accounts for body effect if present. The input impedance is high and the output impedance is low. These results require \\(V_b>V_{T2}\\) and \\(V_{\\text{out}}\\ge V_b-V_{T2}\\), so that \\(M_2\\) remains an effective current sink.",
        "format": "markdown",
        "sha256": "d3194c1383dd8ea09d0ddf022814cdce15e28c6078ef04db9260f382110c1cc6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower topology and current-sink load, gives a positive near-unity gain with body-effect and output-resistance terms, and describes the high input and low output impedances. The bias relation and M2 saturation condition are consistent with the stated assumptions.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 4394,
        "total_tokens": 5618,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3995,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 4394,
        "total_tokens": 5618,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3995,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter**. The gates of the p-channel MOSFET \\(M_2\\) and n-channel MOSFET \\(M_1\\) share \\(V_{\\text{in}}\\), and their drains share \\(V_{\\text{out}}\\).\n\n| \\(V_{\\text{in}}\\) | \\(M_2\\) | \\(M_1\\) | \\(V_{\\text{out}}\\) |\n|---|---|---|---|\n| Low (\\(\\approx 0\\)) | On | Off | High (\\(\\approx V_{DD}\\)) |\n| High (\\(\\approx V_{DD}\\)) | Off | On | Low (\\(\\approx 0\\)) |\n\nThus, \\(V_{\\text{out}}=\\overline{V_{\\text{in}}}\\) in logic terms. Near the switching point, both transistors conduct and the output changes sharply between the two levels. For suitably balanced transistors, that point is approximately \\(V_{DD}/2\\). Ideally, the circuit draws negligible steady-state power at either logic level; current is drawn mainly while switching (apart from leakage).",
        "format": "markdown",
        "sha256": "66dff9ae67f2322d06e478f59b580dbafe98ba732f78efa79bf54319df1edd59"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its PMOS pull-up and NMOS pull-down, and their logic-level operation. The additional switching-point and steady-state-power statements are sound.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 1275,
        "total_tokens": 1555,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 1275,
        "total_tokens": 1555,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter**. \\(M_2\\) is the pMOS pull-up transistor, and \\(M_1\\) is the nMOS pull-down transistor.\n\n| \\(V_{\\text{in}}\\) | \\(M_2\\) | \\(M_1\\) | \\(V_{\\text{out}}\\) |\n|---|---|---|---|\n| Low (\\(\\approx 0\\)) | On | Off | High (\\(\\approx V_{DD}\\)) |\n| High (\\(\\approx V_{DD}\\)) | Off | On | Low (\\(\\approx 0\\)) |\n\nThus, \\(V_{\\text{out}}=\\overline{V_{\\text{in}}}\\). At intermediate input voltages, both transistors can conduct as the output switches; for similarly sized devices, the switching point is roughly \\(V_{DD}/2\\). In either steady logic state, ideal static power consumption is nearly zero, apart from leakage.",
        "format": "markdown",
        "sha256": "19d5d27a847904b54730c7785b061eb16919653e255e9db250b23458697628f7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its PMOS pull-up/NMOS pull-down operation; the logic states and negligible steady-state current are also correct.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 1242,
        "total_tokens": 1522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 1242,
        "total_tokens": 1522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter**. \\(M_2\\) is a PMOS transistor that pulls the output up to \\(V_{DD}\\), while \\(M_1\\) is an NMOS transistor that pulls it down to ground. Their gates share \\(V_{\\text{in}}\\).\n\n| \\(V_{\\text{in}}\\) | \\(M_2\\) | \\(M_1\\) | \\(V_{\\text{out}}\\) |\n|---|---|---|---|\n| Low (near 0) | On | Off | High (near \\(V_{DD}\\)) |\n| High (near \\(V_{DD}\\)) | Off | On | Low (near 0) |\n\nThus, \\(V_{\\text{out}}=\\overline{V_{\\text{in}}}\\) in digital logic. During a transition, both transistors can conduct briefly. In either steady logic state, ideal static power consumption is zero; practical circuits have small leakage current.",
        "format": "markdown",
        "sha256": "719e5920440d811b75179c2646ef69f507df8ef7867cf5cadb90c530196d9741"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its PMOS pull-up and NMOS pull-down, and the input/output behavior. The added transition and static-power statements are also consistent.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 727,
        "total_tokens": 1007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 280,
        "output_tokens": 727,
        "total_tokens": 1007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both \\(M_1\\) and \\(M_2\\) are NMOS transistors driven by the same input. \\(M_1\\) connects \\(V_{\\rm out}\\) toward \\(V_{DD}\\), while \\(M_2\\) connects it toward ground.\n\n- **Low input:** Both transistors are off, so \\(V_{\\rm out}\\) is floating—not driven high.\n- **High input:** Both transistors conduct. They draw a steady current from \\(V_{DD}\\) to ground, and \\(V_{\\rm out}\\) settles between the rails. The upper NMOS cannot pull the output above approximately \\(V_{\\rm in}-V_T\\).\n\nFor example, neglecting body effect and assuming identical long-channel transistors, the on-state output is\n\\[\nV_{\\rm out}=\\left(1-\\frac{1}{\\sqrt2}\\right)(V_{\\rm in}-V_T)\n\\approx 0.293(V_{\\rm in}-V_T).\n\\]\n\nThus this is **not a functional inverter**: a low input leaves the output undefined, and a high input causes contention and static power consumption.",
        "format": "markdown",
        "sha256": "d79845c89d6fc2c5fe5a45285e06ac5f0ebe4113f8c9163d81afb9cae66b346f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes the upper pull-up and lower pull-down actions, and concludes the circuit is not a normal inverter. The matching-device output formula is also correct under the stated assumptions.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3321,
        "total_tokens": 3616,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3321,
        "total_tokens": 3616,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both transistors are **NMOS** devices with their gates connected to \\(V_{\\text{in}}\\). \\(M_1\\) is a pull-up source follower, while \\(M_2\\) pulls the output toward ground. This is **not a CMOS inverter**.\n\nAssuming equal thresholds \\(V_T\\), no output load, and negligible body effect:\n\n- **\\(V_{\\text{in}}\\leq V_T\\):** Both transistors are off, so \\(V_{\\text{out}}\\) is floating—not necessarily zero.\n- **\\(V_{\\text{in}}>V_T\\):** Both conduct. \\(M_1\\) is in saturation and \\(M_2\\) is in the triode region. Equating their currents gives\n  \\[\n  V_{\\text{out}}\n  =(V_{\\text{in}}-V_T)\n  \\left(1-\\frac{1}{\\sqrt{1+\\beta_1/\\beta_2}}\\right),\n  \\]\n  where \\(\\beta_i=\\mu_n C_{\\rm ox}(W/L)_i\\).\n\nFor equal-sized devices, \\(V_{\\text{out}}\\approx0.293(V_{\\text{in}}-V_T)\\). Thus the output rises with the input, but cannot reach a full logic high; when the input is high, there is also a continuous current path from \\(V_{DD}\\) to ground.",
        "format": "markdown",
        "sha256": "e54f4ce96730b0ab2d5b39f2f4928a053e64fbb7678867051f13be5625bdc482"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes the upper source-follower and lower pull-down actions, and concludes this is not a normal CMOS inverter. The operating-region explanation and gain formula are also consistent with the golden solution.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3406,
        "total_tokens": 3701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 3406,
        "total_tokens": 3701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both \\(M_1\\) and \\(M_2\\) are nMOS transistors with gates driven by \\(V_{\\rm in}\\). \\(M_1\\) pulls the output up as a source follower; \\(M_2\\) pulls it down.\n\n- **Low input:** Both transistors are off, so \\(V_{\\rm out}\\) floats rather than becoming a defined logic high.\n- **High input:** Both can conduct. The output settles where their currents are equal, while a continuous current flows from \\(V_{DD}\\) to ground. \\(M_1\\) cannot raise the output above approximately \\(V_{\\rm in}-V_{T1}\\).\n\nFor an ideal square-law model with equal thresholds, negligible body effect, and \\(\\beta_i=\\mu_n C_{\\rm ox}(W/L)_i\\), the conducting-state output is\n\\[\nV_{\\rm out}=(V_{\\rm in}-V_T)\n\\left(1-\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}\\right).\n\\]\nThus the output is set by transistor sizing and rises with the input in this model. **This is not a functional static inverter:** its low-input output is undefined, and its high-input state dissipates static power.",
        "format": "markdown",
        "sha256": "031dc8da16678c266ffa1e60d6b3add00d3cd918c880e298a208f7d1991656e3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes the upper source-follower pull-up and lower pull-down, and concludes this is not a normal CMOS inverter. The additional current-balance analysis is consistent with the golden solution.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 5322,
        "total_tokens": 5617,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5052,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 295,
        "output_tokens": 5322,
        "total_tokens": 5617,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5052,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **NMOS common-source stage with a diode-connected PMOS load**. \\(M_2\\)’s gate and drain are tied to \\(V_{\\text{out}}\\), so\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{\\text{out}}.\n\\]\nConsequently, whenever \\(M_2\\) conducts, it is in saturation and acts as a nonlinear pull-up—not as the input-controlled PMOS of a CMOS inverter.\n\nAssuming the square-law model and neglecting channel-length modulation, let \\(k_n\\) and \\(k_p\\) be the devices’ transconductance parameters. When both transistors conduct and \\(M_1\\) is saturated,\n\\[\n\\frac{k_n}{2}(V_{\\text{in}}-V_{Tn})^2\n=\n\\frac{k_p}{2}(V_{DD}-V_{\\text{out}}-|V_{Tp}|)^2,\n\\]\ngiving\n\\[\n\\boxed{V_{\\text{out}}\n=V_{DD}-|V_{Tp}|\n-\\sqrt{\\frac{k_n}{k_p}}\\,(V_{\\text{in}}-V_{Tn})}.\n\\]\nThis applies for \\(V_{\\text{in}}>V_{Tn}\\) and \\(V_{\\text{out}}\\ge V_{\\text{in}}-V_{Tn}\\). At higher input voltages \\(M_1\\) enters triode, and its triode-region current must instead be equated to \\(M_2\\)’s current.\n\nThus, increasing \\(V_{\\text{in}}\\) lowers \\(V_{\\text{out}}\\): the stage inverts. Around a bias point with \\(M_1\\) saturated, its small-signal gain is\n\\[\nA_v=-\\frac{g_{m1}}{g_{m2}+g_{ds1}+g_{ds2}}\n\\approx-\\frac{g_{m1}}{g_{m2}}.\n\\]\nWhen \\(M_1\\) is off, \\(M_2\\) can charge a low output toward \\(V_{DD}-|V_{Tp}|\\), then turns off; in the ideal cutoff model, the output can float above that level. Unlike a standard CMOS inverter, this circuit also draws **static current** whenever both devices conduct.",
        "format": "markdown",
        "sha256": "e72a01ef19c302b53e65b14d8d19121107575394100080738237697f3e4f1303"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS common-source stage with a diode-connected PMOS load and gives the inverting gain with channel-length modulation included consistently. The large-signal analysis and operating-region conditions are also sound; the cutoff behavior is explicitly allowed by the golden solution.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 6192,
        "total_tokens": 6912,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 6192,
        "total_tokens": 6912,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) is a common-source nMOS transistor. \\(M_2\\) is a **diode-connected pMOS load**: its gate and drain are both tied to \\(V_{\\text{out}}\\). Thus, when \\(M_2\\) conducts, it is in saturation because \\(V_{SD2}=V_{SG2}=V_{DD}-V_{\\text{out}}\\).\n\nThe circuit is inverting. With \\(V_{\\text{in}}<V_{Tn}\\), \\(M_1\\) is off and \\(M_2\\) pulls the output up to approximately \\(V_{DD}-|V_{Tp}|\\), rather than all the way to \\(V_{DD}\\). Increasing \\(V_{\\text{in}}\\) turns on \\(M_1\\), pulling \\(V_{\\text{out}}\\) down and causing a DC current to flow.\n\nFor example, if both transistors conduct and \\(M_1\\) is saturated, the square-law model without channel-length modulation gives\n\\[\n\\frac{\\beta_n}{2}(V_{\\text{in}}-V_{Tn})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_{\\text{out}}-|V_{Tp}|)^2,\n\\]\nso\n\\[\nV_{\\text{out}}\n=\nV_{DD}-|V_{Tp}|\n-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,(V_{\\text{in}}-V_{Tn}).\n\\]\nThis expression applies while \\(V_{\\text{out}}\\geq V_{\\text{in}}-V_{Tn}\\); at lower output voltages, \\(M_1\\) enters the triode region.\n\nFor small signals about a conducting bias point,\n\\[\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-\\frac{g_{m1}}{g_{m2}+g_{ds1}+g_{ds2}},\n\\qquad\nR_{\\text{out}}=\\frac{1}{g_{m2}+g_{ds1}+g_{ds2}}.\n\\]\nThe input resistance is ideally very high. Neglecting output conductances, the gain is approximately \\(-g_{m1}/g_{m2}\\).",
        "format": "markdown",
        "sha256": "5ae325cedd491c20f3c3d83195536a270d87293add54713e354418f680defa35"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both devices’ output conductances included, equivalent to the golden result. The additional operating-region and large-signal remarks are consistent with the solution.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 4138,
        "total_tokens": 4858,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3651,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 4138,
        "total_tokens": 4858,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3651,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **inverting common-source stage with a diode-connected pMOS load**, not a conventional CMOS inverter. \\(M_1\\) is the input-driven nMOS; \\(M_2\\) has its gate and drain tied to \\(V_{\\text{out}}\\). Thus \\(V_{SG2}=V_{SD2}\\), so \\(M_2\\) is in saturation whenever it conducts.\n\nAssume an unloaded output and the ideal long-channel MOS model. Let \\(\\beta_n\\) and \\(\\beta_p\\) be the devices’ transconductance parameters.\n\n- **Low input:** \\(M_1\\) is off. \\(M_2\\) pulls the output up until it reaches approximately\n  \\[\n  V_{\\mathrm{OH}}=V_{DD}-|V_{Tp}|.\n  \\]\n  The output therefore does not reach \\(V_{DD}\\) in this model.\n\n- **Rising input:** Both transistors conduct and \\(V_{\\text{out}}\\) falls. While \\(M_1\\) remains in saturation (\\(V_{\\text{out}}\\geq V_{\\text{in}}-V_{Tn}\\)), equating their currents gives\n  \\[\n  V_{\\text{out}}\n  =V_{DD}-|V_{Tp}|\n   -\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,(V_{\\text{in}}-V_{Tn}).\n  \\]\n  Once \\(V_{\\text{out}}<V_{\\text{in}}-V_{Tn}\\), \\(M_1\\) enters the triode region. Its output voltage then satisfies\n  \\[\n  \\frac{\\beta_p}{2}(V_{DD}-V_{\\text{out}}-|V_{Tp}|)^2\n  =\\beta_n\\!\\left[(V_{\\text{in}}-V_{Tn})V_{\\text{out}}\n                 -\\frac{V_{\\text{out}}^2}{2}\\right].\n  \\]\n\nAround a bias point where \\(M_1\\) is saturated, the small-signal gain is\n\\[\nA_v=-\\frac{g_{m1}}{g_{m2}+g_{ds1}+g_{ds2}}\n\\;\\approx\\;-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n\\]\nwhen channel-length modulation is negligible. Unlike a CMOS inverter, this circuit has a threshold-limited high output and draws **static supply current whenever both devices conduct**.",
        "format": "markdown",
        "sha256": "52c0c88a31cf5662947179f12980f7abeaadd41e8968616ce18a91f879bf7296"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain including both devices’ output conductances, consistent with the full-credit rule. The additional operating-region analysis is also sound.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 6735,
        "total_tokens": 7455,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6205,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 720,
        "output_tokens": 6735,
        "total_tokens": 7455,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6205,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both \\(M_1\\) and \\(M_2\\) are **p-channel MOSFETs**. \\(M_1\\) has its gate and drain tied to ground, so it acts as a diode-connected pull-down. \\(M_2\\) is the input-controlled pull-up.\n\n- **\\(V_{\\text{in}}\\) high:** \\(M_2\\) is off. \\(M_1\\) discharges the output until \\(V_{\\text{out}}\\) is approximately its threshold magnitude, \\(\\lvert V_{Tp1}\\rvert\\), at which point it turns off.\n- **\\(V_{\\text{in}}\\) low:** \\(M_2\\) turns on and pulls the output up. \\(M_1\\) also conducts, so the high output level is below \\(V_{DD}\\) and static current flows from \\(V_{DD}\\) to ground.\n\nThus the circuit **inverts**, but it is a ratioed pMOS inverter, not a rail-to-rail CMOS inverter. Its exact high output voltage depends on the two transistors’ characteristics and sizes.",
        "format": "markdown",
        "sha256": "c420fea9b4933c45a495fd320b85d70d73665664bb669feee0101b488170dfc9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies both PMOS devices, the diode-connected lower device, and the qualitative inverter behavior. However, it omits the central common-source gm/gm amplifier interpretation and its gain or a current-balance explanation, focusing instead on logic-level operation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 3344,
        "total_tokens": 5022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1678,
        "output_tokens": 3344,
        "total_tokens": 5022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both transistors are pMOS devices. \\(M_2\\) is an input-controlled pull-up from \\(V_{DD}\\). The gate and drain of \\(M_1\\) are grounded, making it a **diode-connected pull-down**.\n\n- **Low \\(V_{\\rm in}\\):** \\(M_2\\) turns on and raises \\(V_{\\rm out}\\). \\(M_1\\) also conducts, so the output settles below \\(V_{DD}\\) where the two transistor currents balance. A continuous current flows from \\(V_{DD}\\) to ground.\n- **High \\(V_{\\rm in}\\):** \\(M_2\\) turns off. \\(M_1\\) discharges the output while \\(V_{\\rm out}>|V_{Tp1}|\\), but becomes effectively off as the output approaches that threshold. It therefore does not strongly pull the output to zero; leakage determines its eventual voltage.\n\nThus the circuit acts as a **ratioed pMOS inverter**, not a rail-to-rail CMOS inverter. Its exact output levels require the transistor thresholds and strengths.",
        "format": "markdown",
        "sha256": "f395bd0bf2cf16b5e55a1ef4d6093feab35af410b8291620a6c150632b17d716"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the input-controlled pull-up, and M1 as a diode-connected PMOS load with its gate and drain grounded. Its current-balance explanation captures the gm/gm behavior; the pull-down framing is also allowed by the golden solution.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 8433,
        "total_tokens": 10111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 8433,
        "total_tokens": 10111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming enhancement-mode devices, both transistors are **pMOS**. \\(M_2\\) is the input-controlled pull-up from \\(V_{DD}\\); \\(M_1\\) has its gate and drain grounded, so it is a diode-connected pull-down load.\n\n- **Low \\(V_{\\rm in}\\):** \\(M_2\\) turns on. The output rises until the currents through \\(M_2\\) and \\(M_1\\) balance. Because \\(M_1\\) conducts, \\(V_{\\rm out}\\) is below \\(V_{DD}\\), and a steady supply-to-ground current flows.\n- **High \\(V_{\\rm in}\\):** \\(M_2\\) turns off when \\(V_{\\rm in}\\geq V_{DD}-|V_{T2}|\\). \\(M_1\\) discharges a high output while \\(V_{\\rm out}>|V_{T1}|\\), but cuts off below that threshold. In an ideal cutoff model, the output is then not actively driven to ground; leakage and loading determine its eventual voltage.\n\nThus the circuit has an **inverting response**, but it is a ratioed pMOS stage, not a rail-to-rail CMOS inverter. Exact output levels require the transistor thresholds and strengths.",
        "format": "markdown",
        "sha256": "640f7971c8fc3e057fc6fb15b8120107ea5795363446aa9f8befd28217b34abd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the input-controlled pull-up, and M1 as the diode-connected PMOS load with gate and drain grounded. The current-balance and inverting-response explanation satisfies the golden solution’s equivalent-to-gm/gm full-credit rule.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 12650,
        "total_tokens": 14328,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12376,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1675,
        "input_tokens": 1678,
        "output_tokens": 12650,
        "total_tokens": 14328,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12376,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "With \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) at AC ground, \\(M_2\\) presents \\(r_{o2}\\) at node \\(X\\). Neglecting body effect,\n\n\\[\n\\boxed{R_{\\text{out}}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nFor large \\(g_{m1}r_o\\), this is approximately \\(g_{m1}r_{o1}r_{o2}\\).",
        "format": "markdown",
        "sha256": "1c72187ce91868ab2984a2a12fa6662dbc25b72a0c7887201404fd8b46de8549"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The output-resistance expression and dominant approximation are correct, with M1’s transconductance as the cascode factor. Neglecting body effect is explicitly allowed.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2669,
        "output_tokens": 1546,
        "total_tokens": 4215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2669,
        "output_tokens": 1546,
        "total_tokens": 4215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat \\(V_{DD}\\) and both bias voltages as AC ground. Then \\(M_2\\) presents \\(r_{o2}\\) from node \\(X\\) to ground, and the resistance looking into \\(M_1\\)’s drain is\n\n\\[\n\\boxed{R_{\\text{out}}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nignoring body effect. When the gain term dominates, \\(R_{\\text{out}}\\approx g_{m1}r_{o1}r_{o2}\\).",
        "format": "markdown",
        "sha256": "add5fa535a8ef6cd732f7c8b2731c4795ef6d7164339db1ca4bf53532f3acad0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Uses M1 as the output-side cascode device and gives the correct Rout expression with gm1; ignoring body effect is explicitly allowed.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 1169,
        "total_tokens": 3838,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 1169,
        "total_tokens": 3838,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "With \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) at AC ground, the resistance looking into the drain of \\(M_1\\) is\n\n\\[\n\\boxed{R_{\\text{out}}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nNeglecting body effect and assuming \\(g_{m1}r_o\\gg1\\), this is approximately \\(g_{m1}r_{o1}r_{o2}\\).",
        "format": "markdown",
        "sha256": "4db46e2068b87ca69f0be6c482aba1c85f68f835990bc701a0bd4cb141aa5e72"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the correct output-resistance expression with M1’s transconductance as the cascode factor and the correct dominant approximation. Neglecting body effect is allowed.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 1160,
        "total_tokens": 3829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2666,
        "input_tokens": 2669,
        "output_tokens": 1160,
        "total_tokens": 3829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the upper PMOS \\(M_2\\), the source is at \\(V_{DD}\\) and the drain is at \\(X\\). To keep it **on and in saturation**, choose the biases so that\n\n\\[\nV_{DD}-V_{b2}>|V_{TP2}|\n\\quad\\text{and}\\quad\nV_{DD}-V_X\\ge (V_{DD}-V_{b2})-|V_{TP2}|.\n\\]\n\nThe saturation condition simplifies to\n\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|.}\n\\]\n\nThus, \\(V_{b1}\\) and \\(V_{b2}\\) must be selected so that the operating voltage at node \\(X\\) stays below this limit. The schematic alone does not guarantee it.",
        "format": "markdown",
        "sha256": "bcde26805071c85d5aa72629cf76dda994b6919bfb8efcf725060bc13c5def3c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M2 as PMOS and gives its saturation condition, but does not relate VX to Vb1, the key control of the node voltage. It leaves the answer as a condition on VX and Vb2.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 1731,
        "total_tokens": 4296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2565,
        "output_tokens": 1731,
        "total_tokens": 4296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M₂ is a PMOS with source at \\(V_{DD}\\) and drain at node \\(X\\). To keep it in saturation, ensure\n\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP2}|,\n\\]\n\nor, using the voltages in the figure,\n\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|.}\n\\]\n\nChoose the bias voltages and operating current so that node \\(X\\) stays below this limit, preferably with some margin. M₂ is not guaranteed to be in saturation by the connection alone.",
        "format": "markdown",
        "sha256": "0ef9a98b70bda6ccb2233b5e5ae1bf5adf3ec30e45851881401f43d41f43bde9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives the correct PMOS saturation inequality, but misses the essential relation between X and Vb1 through M1 and treats the condition on X/Vb2 as sufficient. The golden solution assigns this answer 1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 1166,
        "total_tokens": 3731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 1166,
        "total_tokens": 3731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the upper PMOS \\(M_2\\), the source is at \\(V_{DD}\\) and the drain is at \\(X\\). Keep it on and provide enough source-to-drain voltage for saturation:\n\n\\[\nV_{SG2}=V_{DD}-V_{b2}>|V_{TP2}|,\\qquad\nV_{SD2}=V_{DD}-V_X\\ge V_{SG2}-|V_{TP2}|.\n\\]\n\nThe saturation condition simplifies to **\\(V_X\\le V_{b2}+|V_{TP2}|\\)**. Choose the biases and operating current so that node \\(X\\) stays below this limit, including at its worst-case value.",
        "format": "markdown",
        "sha256": "2bd9fda7f7e90eef4895f56a90b676d0c4867b94064fa53e8b023bd4ec33f6af"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M2 as PMOS and states its saturation condition, but treats Vb2 as the control and misses that VX is set by Vb1, so it gives no required condition on Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 1187,
        "total_tokens": 3752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2562,
        "input_tokens": 2565,
        "output_tokens": 1187,
        "total_tokens": 3752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS cascode amplifier**. \\(M_1\\) is the common-source input transistor; \\(M_2\\), whose gate is held at \\(V_{b1}\\), is the common-gate cascode. The current source supplies their bias current, so \\(I_{D1}=I_{D2}=I_1\\) at the operating point.\n\nFor amplification, both transistors must remain in saturation. Writing \\(V_{OV}\\) for overdrive voltage, the approximate headroom requirements are\n\\[\nV_X\\geq V_{OV1},\\qquad V_{\\mathrm{out}}\\geq V_X+V_{OV2},\n\\]\nwhere \\(V_X\\approx V_{b1}-V_{T2}-V_{OV2}\\). A practical current source also limits the maximum output voltage.\n\nWith an *ideal* \\(I_1\\), fixed \\(V_{b1}\\), and body effect neglected, small-signal analysis gives\n\\[\nv_x=-g_{m1}r_{o1}v_{\\mathrm{in}},\\qquad\nv_{\\mathrm{out}}=(1+g_{m2}r_{o2})v_x.\n\\]\nThus the voltage gain is **inverting**:\n\\[\n\\boxed{A_v=-g_{m1}r_{o1}(1+g_{m2}r_{o2})\n\\;\\approx\\;-g_{m1}g_{m2}r_{o1}r_{o2}.}\n\\]\nThe cascode raises the output resistance to\n\\[\nR_{\\mathrm{out}}=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}.\n\\]\nIf \\(I_1\\) has finite output resistance, it appears in parallel with this resistance and reduces the gain. The MOS gate gives a very high low-frequency input resistance.",
        "format": "markdown",
        "sha256": "be356fb9e72fa362c7f5fd6099e761346ce373e30223618a80458aefbac1d063"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. The stated finite-load effect is also correct.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 11143,
        "total_tokens": 12445,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 11143,
        "total_tokens": 12445,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is an **inverting NMOS cascode amplifier**: \\(M_1\\) is the common-source input device, \\(M_2\\) is the common-gate cascode, and \\(I_1\\) supplies the bias current.\n\nAt the operating point, \\(I_{D1}=I_{D2}=I_1\\) and \\(V_X\\approx V_{b1}-V_{GS2}\\). Both transistors remain in saturation if\n\\[\nV_X\\ge V_{\\mathrm{OV1}},\\qquad\nV_{\\mathrm{out}}\\ge V_X+V_{\\mathrm{OV2}}.\n\\]\nThe current source must also have sufficient voltage headroom.\n\nFor an ideal \\(I_1\\), neglecting body effect, the small-signal gain is\n\\[\n\\boxed{\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=-g_{m1}r_{o1}(1+g_{m2}r_{o2})\n\\;\\approx\\;-g_{m1}g_{m2}r_{o1}r_{o2}.}\n\\]\nThe negative sign means an increase in input voltage lowers the output voltage. The input resistance is very high, while\n\\[\nR_{\\mathrm{out}}=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}.\n\\]\nThus \\(M_2\\) substantially raises output resistance and gain. A real current source with finite output resistance \\(r_{I_1}\\) reduces the output resistance to \\(R_{\\mathrm{out}}\\parallel r_{I_1}\\), limiting the gain.",
        "format": "markdown",
        "sha256": "73b2a27ccecffd78e47ea1e8d3512091e5f563e7f4a0088b34087fa315568158"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the ideal-load gain with body effect omitted. The output-resistance and finite-load comments are also consistent.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 8166,
        "total_tokens": 9468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7808,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 8166,
        "total_tokens": 9468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7808,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS cascode amplifier**: \\(M_1\\) is the input common-source transistor, \\(M_2\\) is a common-gate cascode biased by \\(V_{b1}\\), and \\(I_1\\) supplies the load current. An increase in \\(V_{\\mathrm{in}}\\) drives \\(V_{\\mathrm{out}}\\) downward, so the amplifier is inverting.\n\nFor a valid quiescent operating point, both transistors carry \\(I_1\\). The bias sets\n\\[\nV_X \\simeq V_{b1}-V_{GS2}.\n\\]\nBoth NMOS devices remain in saturation only if\n\\[\nV_X\\ge V_{\\mathrm{OV1}},\\qquad\nV_{\\mathrm{out}}\\ge V_X+V_{\\mathrm{OV2}},\n\\]\nwhere \\(V_{\\mathrm{OV}i}=V_{GSi}-V_{THi}\\). The upper output limit depends on the voltage compliance of \\(I_1\\).\n\nNeglecting body effect and treating \\(I_1\\) as ideal, the small-signal results are\n\\[\nR_{\\mathrm{in}}\\simeq\\infty,\\qquad\nR_{\\mathrm{out}}=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2},\n\\]\nand\n\\[\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=-g_{m1}r_{o1}(1+g_{m2}r_{o2})\n\\;\\approx\\;-g_{m1}g_{m2}r_{o1}r_{o2}.\n\\]\nThus \\(M_2\\) greatly raises the output resistance—and hence the gain—while shielding \\(M_1\\)’s drain from much of the output swing. A nonideal current source with output resistance \\(r_I\\) reduces the overall output resistance to \\(R_{\\mathrm{out}}\\parallel r_I\\).",
        "format": "markdown",
        "sha256": "8cfce5bd5e7669fc476be030a0df1fa57ebd9d7a5a1ccb5c3978314c6773c5da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source input NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression with body effect neglected. The output-resistance and loading discussion is also consistent.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 8752,
        "total_tokens": 10054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8319,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1299,
        "input_tokens": 1302,
        "output_tokens": 8752,
        "total_tokens": 10054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8319,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Not as drawn.** The arrow on \\(M_1\\) identifies it as a pMOS transistor, with its source at the junction between \\(M_1\\) and \\(M_2\\) and its drain at ground. So \\(M_1\\) is a common-drain stage, not the common-source stage of a conventional cascode.\n\nIf \\(M_1\\) were an nMOS with its **source grounded** and its **drain connected to \\(M_2\\)’s source**, the circuit would be a cascode.",
        "format": "markdown",
        "sha256": "6ab1d41320013edaaf93d64fe6460219d7faf8617a3c1de5d3728fbaafbbc914"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-drain/source-follower stage, not the common-source device needed for a conventional cascode.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 3946,
        "total_tokens": 5322,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3825,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1376,
        "output_tokens": 3946,
        "total_tokens": 5322,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3825,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The arrows show that \\(M_1\\) is a pMOS whose **source** connects to the source of the nMOS \\(M_2\\). So \\(M_1\\) is a common-drain stage feeding a common-gate stage—not the common-source/common-gate pairing of a cascode.",
        "format": "markdown",
        "sha256": "8b2b297bd64c19c419c95c3d093ce50edc9a200d6d56987c09815ebe0ca2e27c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-drain (source-follower) stage feeding M2’s common-gate stage, rather than the common-source/common-gate pairing of a cascode.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 3178,
        "total_tokens": 4554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 3178,
        "total_tokens": 4554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Not as drawn.** The arrow on \\(M_1\\) indicates a pMOS whose source is connected to \\(M_2\\)’s source, while its drain is grounded. A conventional cascode needs the lower transistor’s **drain** connected to the upper transistor’s source.\n\nIf \\(M_1\\) was meant to be an nMOS with its source grounded, then the intended circuit *would* be a standard cascode: common-source \\(M_1\\) beneath common-gate \\(M_2\\).",
        "format": "markdown",
        "sha256": "623b7b67f5a41647c3b70bf787917099ae4099a8091059833fe282e74b8b85f2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that the circuit is not a cascode and identifies the PMOS and its source/drain connections. It does not explicitly explain that M1 acts as a source follower rather than a common-source stage.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 4258,
        "total_tokens": 5634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1373,
        "input_tokens": 1376,
        "output_tokens": 4258,
        "total_tokens": 5634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is large when a capacitance connects an amplifier’s input to a node with a large, opposite-polarity voltage swing. In a common-source stage, the gate-to-drain capacitance \\(C_{gd}\\) therefore appears at the input as roughly \\((1+|A_v|)C_{gd}\\).\n\nIn a cascode, the upper transistor presents a low impedance to the lower transistor’s drain, so that drain has only a small voltage swing—even though the **output** may swing substantially. The lower transistor’s \\(C_{gd}\\) is thus multiplied by only its small gain to that intermediate node, not by the cascode’s large overall gain. This reduces input capacitance and improves high-frequency bandwidth.",
        "format": "markdown",
        "sha256": "8dd63104705c951643951ed947580c1dcc914b75d5e01903eaa73e03cfc92c6d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cascode’s low-impedance intermediate node and the resulting smaller swing across the lower transistor’s Cgd, so Miller multiplication depends on the local gain rather than the full stage gain.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 672,
        "total_tokens": 691,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 672,
        "total_tokens": 691,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect depends on the **voltage gain across a feedback capacitance**. In a common-source amplifier, the drain swings by many times the input voltage, so the gate-to-drain capacitance \\(C_{gd}\\) appears at the input as roughly \\(C_{gd}(1+|A_v|)\\).\n\nIn a cascode, the upper transistor presents a low impedance to the lower transistor’s drain, keeping that node’s voltage swing small. The lower transistor’s \\(C_{gd}\\) therefore sees only a modest gain across it, even though the cascode’s **overall** gain can be large. The large output swing occurs at the upper transistor’s drain, away from the input transistor’s gate-to-drain capacitance. Thus, \\(C_{gd}\\) is much less Miller-multiplied, reducing input capacitance and improving high-frequency response.",
        "format": "markdown",
        "sha256": "8cabae7d099c52e401d6e547663ef2f23690e3b51a43208deeb774788276c07e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and explains that it limits the voltage swing across the lower transistor’s Cgd, reducing Miller multiplication despite high overall gain.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 700,
        "total_tokens": 719,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 700,
        "total_tokens": 719,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is large when a capacitance connects an amplifier’s input to a node with a **large, inverted voltage swing**. In a common-source stage, the drain has that swing, so the gate–drain capacitance appears at the input as roughly \\(C_{gd}(1+|A_v|)\\).\n\nIn a cascode, the common-gate transistor holds the lower transistor’s drain at low AC impedance. That drain has only a modest swing, even though the cascode’s output may swing substantially. Thus the lower transistor’s \\(C_{gd}\\) is multiplied by only its **small local gain**, not the large overall gain, reducing the effective input capacitance and improving high-frequency response.",
        "format": "markdown",
        "sha256": "d30ef514e26ef3df2166e99f03fff15eb4bd90ca6af0f10e57855ae1d3f3941c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that the common-gate device makes M1’s drain a low-impedance, modest-swing node, so Cgd1 sees only the local gain rather than the full stage gain. It does not claim the effect is eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 945,
        "total_tokens": 964,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 794,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 19,
        "output_tokens": 945,
        "total_tokens": 964,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 794,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**M₂ is an NMOS common-gate stage:** its gate is held at \\(V_{b1}\\), the input drives its source, and the output is taken from its drain. **M₁ is a PMOS current-source load**, biased by \\(V_{b2}\\). The stage is therefore non-inverting: raising \\(V_{\\rm in}\\) reduces M₂’s gate-to-source voltage and its pull-down current, so \\(V_{\\rm out}\\) rises.\n\nAt the operating point, \\(I_{D1}=I_{D2}\\). For both transistors to remain in saturation, they must be on and the output must satisfy\n\\[\nV_{\\rm in}+V_{OV2}\\ \\leq\\ V_{\\rm out}\\ \\leq\\ V_{DD}-V_{OV1},\n\\]\nwhere \\(V_{OV1}\\) and \\(V_{OV2}\\) are their overdrive voltages.\n\nWith the supply and bias voltages fixed for small signals, the unloaded voltage gain is\n\\[\nA_v=\\frac{v_{\\rm out}}{v_{\\rm in}}\n=\\frac{g_{m2}+g_{mb2}+g_{o2}}{g_{o1}+g_{o2}}\n\\;\\approx\\;(g_{m2}+g_{mb2})(r_{o1}\\parallel r_{o2})>0.\n\\]\nHere \\(g_{oi}=1/r_{oi}\\); omit \\(g_{mb2}\\) if body effect is absent. With an ideal voltage drive at the input, the output resistance is approximately \\(r_{o1}\\parallel r_{o2}\\).",
        "format": "markdown",
        "sha256": "eb18e00e151db61ec366d2d0857d4fb045d592312e519717ccd9956c36cdb8c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, the source-driven input, non-inverting behavior, and an equivalent gain expression. It omits the low input resistance, a property required by the full-credit rule.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 7923,
        "total_tokens": 9147,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7573,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1224,
        "output_tokens": 7923,
        "total_tokens": 9147,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7573,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **noninverting common-gate amplifier**. \\(M_2\\) is the NMOS amplifying transistor: its gate is held at \\(V_{b1}\\), its source receives \\(V_{\\mathrm{in}}\\), and its drain is \\(V_{\\mathrm{out}}\\). \\(M_1\\) is a PMOS current-source load biased by \\(V_{b2}\\). The input must also provide a DC return path for the current through both transistors.\n\nFor both devices to remain in saturation, the quiescent output voltage must satisfy\n\\[\nV_{\\mathrm{in},Q}+V_{\\mathrm{OV}2}\n\\;\\leq\\;V_{\\mathrm{out},Q}\n\\;\\leq\\;V_{DD}-V_{\\mathrm{OV}1},\n\\]\nwhere \\(V_{\\mathrm{OV}1}=V_{DD}-V_{b2}-|V_{TP1}|\\) and\n\\(V_{\\mathrm{OV}2}=V_{b1}-V_{\\mathrm{in},Q}-V_{TN2}\\).\n\nAt low frequencies, with the supplies and bias voltages at AC ground and body effect neglected, the small-signal gain is\n\\[\n\\boxed{\\displaystyle\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=\\frac{g_{m2}+1/r_{o2}}{1/r_{o1}+1/r_{o2}}\n\\;\\approx\\;g_{m2}(r_{o1}\\parallel r_{o2})>0.}\n\\]\nRaising \\(V_{\\mathrm{in}}\\) reduces \\(M_2\\)’s gate-to-source voltage and drain current, allowing \\(M_1\\) to pull \\(V_{\\mathrm{out}}\\) upward.\n\nWith an ideal voltage source holding the input at AC ground, \\(R_{\\mathrm{out}}=r_{o1}\\parallel r_{o2}\\). For the unloaded output,\n\\[\nR_{\\mathrm{in}}=\\frac{r_{o1}+r_{o2}}{1+g_{m2}r_{o2}},\n\\]\nwhich is typically of order \\(1/g_{m2}\\), though the high-resistance current-source load can make it larger. If \\(M_2\\)’s body is AC-grounded rather than tied to its source, replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\) in these expressions.",
        "format": "markdown",
        "sha256": "a6bc830c62aa351a7a61072e5c597a7bf7790c025d1f3d1b2fea407ff0e3f0c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stage, source-side input, PMOS current-source load, bias voltages, non-inverting gain, and low input resistance. The gain expression and additional small-signal and saturation details are consistent with the topology.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 7099,
        "total_tokens": 8323,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6570,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 7099,
        "total_tokens": 8323,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6570,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **common-gate amplifier**: \\(M_2\\) is an NMOS whose source receives \\(V_{\\mathrm{in}}\\), and \\(M_1\\) is a PMOS biased by \\(V_{b2}\\) to act as an active current-source load. The gate bias \\(V_{b1}\\) sets \\(M_2\\)’s operating point. At DC, the two transistor currents must match, with \\(V_{\\mathrm{out}}\\) chosen so both remain in saturation.\n\nThe voltage gain is **positive**. Raising \\(V_{\\mathrm{in}}\\) reduces \\(M_2\\)’s gate-to-source voltage and hence the current it sinks; \\(M_1\\) then pulls \\(V_{\\mathrm{out}}\\) upward.\n\nFor small signals, with the supplies and bias voltages fixed and body effect neglected, let \\(r_{oi}\\) be each transistor’s output resistance. Then\n\\[\n\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=\\frac{g_{m2}+1/r_{o2}}{1/r_{o1}+1/r_{o2}}\n\\;\\approx\\;g_{m2}(r_{o1}\\parallel r_{o2}).\n\\]\nWith the input voltage held fixed, \\(R_{\\mathrm{out}}=r_{o1}\\parallel r_{o2}\\). With no additional output load,\n\\[\nR_{\\mathrm{in}}=\\frac{r_{o1}+r_{o2}}{1+g_{m2}r_{o2}},\n\\]\ntypically on the order of \\(1/g_{m2}\\).\n\nBoth devices remain saturated only while\n\\[\nV_{\\mathrm{in}}+V_{OV2}\\ \\leq\\ V_{\\mathrm{out}}\\ \\leq\\ V_{DD}-V_{OV1},\n\\]\nwhere \\(V_{OV1}\\) and \\(V_{OV2}\\) are their respective overdrive voltages.",
        "format": "markdown",
        "sha256": "c1214e6adee3b9006744bf3477704f7d40193077cceee2c7e80c9d1c3d3c3899"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with a PMOS current-source load, source-driven input, fixed bias voltages, non-inverting gain, low input resistance, and the equivalent finite-r gain expression. The stated saturation limits are also consistent.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 8036,
        "total_tokens": 9260,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7614,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1221,
        "input_tokens": 1224,
        "output_tokens": 8036,
        "total_tokens": 9260,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7614,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**: one associated with the \\(M_1\\) gate node and one with the output node. The capacitors connected to \\(M_2\\) add capacitance at the output but do not create another independent node.",
        "format": "markdown",
        "sha256": "639b4802e16b5caa92d5021fe1ff8ad0e738bd9f3661969fd8d9bdb305a6835e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent nodes—the M1 gate and output—and notes that M2-related capacitance at the output does not create another pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 1092,
        "total_tokens": 2833,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1741,
        "output_tokens": 1092,
        "total_tokens": 2833,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**: one associated with the gate of \\(M_1\\) and one with the output node. The bias terminals of \\(M_2\\) are AC-grounded, so they do not add an independent pole.",
        "format": "markdown",
        "sha256": "6ea6202f85fbdb0d6ef39689332f3a701da76d56938f156ac9d0300613223676"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent dynamic nodes: the gate of M1 and the output. The AC-grounded M2 bias terminals add no independent pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 1821,
        "total_tokens": 3562,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1764,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 1821,
        "total_tokens": 3562,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1764,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**: one associated with the gate of \\(M_1\\) and one with the output node. The capacitors between those nodes couple their dynamics but do not create additional independent poles.",
        "format": "markdown",
        "sha256": "0113fef0c12a94a3dd579bc2b7fbd2e5c13ff09a55be983bb36d56004c51c362"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles from the gate and output nodes; coupling between them does not add an independent pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 1034,
        "total_tokens": 2775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1738,
        "input_tokens": 1741,
        "output_tokens": 1034,
        "total_tokens": 2775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two NMOS transistors form a **series pull-down** for the resistor \\(R_D\\). Both gates receive \\(V_{\\rm in}\\), so the circuit is a resistively loaded inverter: a low input gives \\(V_{\\rm out}\\approx V_{DD}\\), while a higher input draws current through \\(R_D\\) and lowers \\(V_{\\rm out}\\).\n\nLet \\(V_X\\) be the node between the transistors. The same current flows through both devices, and\n\\[\nI_D=\\frac{V_{DD}-V_{\\rm out}}{R_D},\\qquad\nV_{GS1}=V_{\\rm in},\\qquad V_{GS2}=V_{\\rm in}-V_X.\n\\]\nThus \\(M_2\\) has less gate-to-source voltage than \\(M_1\\). This is **not a conventional cascode** with a fixed upper-gate bias.\n\nFor identical transistors, neglecting body effect and channel-length modulation, define \\(u=V_{\\rm in}-V_T>0\\) and \\(I_{D,\\mathrm{sat}}=\\tfrac{\\beta}{2}V_{\\rm OV}^2\\) for one transistor. When \\(V_{\\rm out}\\ge u\\), \\(M_2\\) is saturated and \\(M_1\\) is in the triode region. Solving for their equal currents gives\n\\[\nV_X=\\left(1-\\frac{1}{\\sqrt2}\\right)u,\\qquad\nI_D=\\frac{\\beta}{4}u^2,\n\\]\nso\n\\[\nV_{\\rm out}=V_{DD}-\\frac{\\beta R_D}{4}(V_{\\rm in}-V_T)^2,\n\\qquad\n\\frac{dV_{\\rm out}}{dV_{\\rm in}}\n=-\\frac{\\beta R_D}{2}(V_{\\rm in}-V_T).\n\\]\n\nIf \\(V_{\\rm out}<u\\), both transistors are in triode; instead determine the output from\n\\[\n\\frac{V_{DD}-V_{\\rm out}}{R_D}\n=\\frac{\\beta}{2}\\left(uV_{\\rm out}-\\frac{V_{\\rm out}^2}{2}\\right).\n\\]\nUnder these ideal assumptions, the stack behaves like one NMOS with **half the \\(\\beta\\)** of either transistor. Body effect in a real \\(M_2\\) generally weakens the pull-down further.",
        "format": "markdown",
        "sha256": "ac8b7e9a019b21c4db88a0b924b270d9345b1870baabe8a8fd2e9e2b17fcf367"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series stack, with the lower device in triode and upper device saturated, and derives the equivalent half-β behavior. For identical equal-width devices, that is the longer effective channel (approximately twice the length).",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 9848,
        "total_tokens": 11276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 9848,
        "total_tokens": 11276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **resistor-loaded nMOS inverter** with two transistors in series as its pull-down path. Both gates receive \\(V_{\\mathrm{in}}\\): a low input turns the path off, so \\(R_D\\) pulls \\(V_{\\mathrm{out}}\\) up to \\(V_{DD}\\); a high input draws current through \\(R_D\\) and pulls the output down.\n\nFor a quantitative result, assume long-channel MOSFETs with the same constant threshold \\(V_T\\), and neglect body effect and channel-length modulation. Let \\(U=V_{\\mathrm{in}}-V_T\\) and \\(\\beta_i=\\mu_nC_{\\mathrm{ox}}(W/L)_i\\). The series pair behaves like one transistor with\n\n\\[\n\\beta_{\\mathrm{eq}}\n=\\left(\\frac{1}{\\beta_1}+\\frac{1}{\\beta_2}\\right)^{-1}.\n\\]\n\nIts operating point satisfies \\(V_{\\mathrm{out}}=V_{DD}-R_DI_D\\), where\n\n\\[\nI_D=\n\\begin{cases}\n0, & U\\leq0,\\\\[2pt]\n\\dfrac{\\beta_{\\mathrm{eq}}}{2}U^2,\n  & U>0,\\quad V_{\\mathrm{out}}\\geq U,\\\\[6pt]\n\\beta_{\\mathrm{eq}}\\!\\left(UV_{\\mathrm{out}}\n-\\dfrac{V_{\\mathrm{out}}^2}{2}\\right),\n  & U>0,\\quad V_{\\mathrm{out}}<U.\n\\end{cases}\n\\]\n\nThus, for matched devices, \\(\\beta_{\\mathrm{eq}}=\\beta/2\\): ideally the pair has the drive of one device with twice the channel length. In the middle region above, \\(M_1\\) operates in triode and \\(M_2\\) in saturation; the small-signal voltage gain there is approximately\n\n\\[\nA_v=-R_D\\beta_{\\mathrm{eq}}(V_{\\mathrm{in}}-V_T).\n\\]\n\nAlthough the stacked pair is sometimes called a *self-cascode*, it is **not a conventional cascode**: \\(M_2\\)'s gate is driven by the input rather than held at a separate bias voltage. In a physical circuit, body effect in \\(M_2\\) and channel-length modulation will alter these idealized results.",
        "format": "markdown",
        "sha256": "3f1f815b74527008690e75ca2a4dde124979b9b2048d9cd21b10f70e9c0bc898"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gated series NMOS pair and derives the equivalent drive corresponding to a longer channel (twice the length for matched devices). Its triode/saturation regions and gain are consistent with the stated ideal assumptions, and it does not mistake the circuit for a conventional cascode.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 5995,
        "total_tokens": 7423,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5482,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 5995,
        "total_tokens": 7423,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5482,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a resistively loaded **inverting NMOS stage**: raising \\(V_{\\rm in}\\) increases the current through \\(R_D\\), pulling \\(V_{\\rm out}\\) down. Because both gates are driven by \\(V_{\\rm in}\\), it is **not a conventional cascode**.\n\nTo quantify it, assume equal thresholds \\(V_T\\), long-channel square-law devices, and negligible body effect and channel-length modulation. Let \\(V_X\\) be the node between the transistors, \\(u=V_{\\rm in}-V_T\\), and \\(\\beta_i=\\mu_n C_{\\rm ox}(W/L)_i\\).\n\n- **\\(V_{\\rm in}\\le V_T\\):** The stack is off, so \\(V_{\\rm out}\\approx V_{DD}\\).\n- **\\(V_{\\rm in}>V_T\\):** For \\(M_2\\) to conduct, \\(V_X<u\\). Thus \\(M_1\\) is in its *triode* region—it cannot be saturated at the same time as a conducting \\(M_2\\) under these assumptions.\n\nWhen \\(V_{\\rm out}\\ge u\\), \\(M_2\\) is saturated. Equating the currents through the two devices gives\n\\[\nI_D=\\frac{\\beta_{\\rm eq}}{2}(V_{\\rm in}-V_T)^2,\n\\qquad\n\\beta_{\\rm eq}=\\left(\\frac1{\\beta_1}+\\frac1{\\beta_2}\\right)^{-1}.\n\\]\nConsequently,\n\\[\nV_{\\rm out}=V_{DD}-R_D I_D,\n\\qquad\nA_v=\\frac{dV_{\\rm out}}{dV_{\\rm in}}\n=-R_D\\beta_{\\rm eq}(V_{\\rm in}-V_T).\n\\]\nFor identical transistors, \\(\\beta_{\\rm eq}=\\beta/2\\).\n\nIf the output falls below \\(V_{\\rm in}-V_T\\), both devices are in triode and the current instead satisfies\n\\[\nI_D=\\beta_{\\rm eq}\\left[(V_{\\rm in}-V_T)V_{\\rm out}\n-\\frac{V_{\\rm out}^2}{2}\\right],\n\\qquad V_{\\rm out}=V_{DD}-R_D I_D.\n\\]\nThus the circuit can serve as an inverting amplifier around a suitable bias point, or as a resistive-load inverter over a larger input range. Body effect in the upper transistor changes the quantitative results for a real implementation.",
        "format": "markdown",
        "sha256": "d830fbc2efad02db28148c646bca0dcde4996933b3127cba8a7930d766cc39fd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series stack and the lower device’s triode operation. Its derived harmonic \u001b[?]β\u001b[?] equivalent is the longer-effective-channel relation (β/2 for identical devices), and the stated operating-region and load equations are consistent with the assumptions.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 6089,
        "total_tokens": 7517,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1425,
        "input_tokens": 1428,
        "output_tokens": 6089,
        "total_tokens": 7517,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **single-ended NMOS differential pair**. The current source fixes the total source current at \\(I_1\\); \\(V_{\\rm in}\\) and \\(V_b\\) determine how that current divides between \\(M_1\\) and \\(M_2\\). The resistor converts \\(M_2\\)’s drain current into an output voltage:\n\n\\[\nI_{D1}+I_{D2}=I_1,\\qquad V_{\\rm out}=V_{DD}-R_D I_{D2}.\n\\]\n\nFor matched transistors with \\(V_{\\rm in}=V_b\\), each carries \\(I_1/2\\), so\n\n\\[\nV_{\\rm out,Q}=V_{DD}-\\frac{I_1R_D}{2}.\n\\]\n\nNear this operating point, assuming both transistors remain in saturation and the tail current source is ideal,\n\n\\[\n\\Delta V_{\\rm out}\n=\\frac{g_mR_D}{2}\\bigl(\\Delta V_{\\rm in}-\\Delta V_b\\bigr),\n\\]\n\nwhere \\(g_m\\) is the transconductance of either transistor at \\(I_D=I_1/2\\). Thus, with \\(V_b\\) fixed, the voltage gain from \\(V_{\\rm in}\\) is **positive**, approximately \\(g_mR_D/2\\).\n\nIncreasing \\(V_{\\rm in}\\) steers current toward \\(M_1\\), reducing the current through \\(R_D\\) and raising \\(V_{\\rm out}\\). Decreasing \\(V_{\\rm in}\\) does the opposite. If nearly all the current flows through \\(M_2\\), the idealized low output is \\(V_{DD}-I_1R_D\\); the high output approaches \\(V_{DD}\\). These limits—and the gain expression—require sufficient voltage headroom to keep the conducting devices in their intended operating regions.",
        "format": "markdown",
        "sha256": "11ddd8002cd85c9d6d2a23fb24bbabc88027c357fb35b62596ab07898d76c950"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a source-coupled differential pair with M2 biased by Vb and output at its drain. The current-steering explanation and positive gain of approximately gmRD/2 are also correct.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 3507,
        "total_tokens": 5802,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2295,
        "output_tokens": 3507,
        "total_tokens": 5802,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **single-ended NMOS differential pair**. The current source fixes the total current, while \\(R_D\\) converts the current in \\(M_2\\) to an output voltage:\n\\[\nI_{D1}+I_{D2}=I_1,\\qquad V_{\\text{out}}=V_{DD}-I_{D2}R_D.\n\\]\n\nAssuming matched transistors and adequate voltage headroom:\n\n| Input | Current in \\(M_2\\) | Output |\n|---|---:|---:|\n| \\(V_{\\text{in}}\\ll V_b\\) | \\(\\approx I_1\\) | \\(\\approx V_{DD}-I_1R_D\\) |\n| \\(V_{\\text{in}}=V_b\\) | \\(I_1/2\\) | \\(V_{DD}-I_1R_D/2\\) |\n| \\(V_{\\text{in}}\\gg V_b\\) | \\(\\approx 0\\) | \\(\\approx V_{DD}\\) |\n\nIncreasing \\(V_{\\text{in}}\\) steers current from \\(M_2\\) to \\(M_1\\), **raising** \\(V_{\\text{out}}\\). Thus \\(V_b\\) is the input reference, and this output is noninverting. Near \\(V_{\\text{in}}=V_b\\), the small-signal gain is\n\\[\n\\frac{\\partial V_{\\text{out}}}{\\partial(V_{\\text{in}}-V_b)}\n\\approx \\frac{g_mR_D}{2},\n\\]\nwhere \\(g_m\\) is the transconductance of either transistor at \\(I_1/2\\).",
        "format": "markdown",
        "sha256": "8cac487254a4aa8da47532c97339700b7a7df0fe8cbfd7c793d1500e6c81999f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, describes current steering through M2 and the drain-resistor output, and gives the correct noninverting gain near the balanced operating point.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 13023,
        "total_tokens": 15318,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12658,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 13023,
        "total_tokens": 15318,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12658,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **resistor-loaded NMOS differential pair**. The current source fixes the total drain current, so \\(I_{D1}+I_{D2}=I_1\\), and the output is\n\n\\[\nV_{\\text{out}}=V_{DD}-R_D I_{D2}.\n\\]\n\nAssuming matched transistors operating in saturation, \\(V_{\\text{in}}=V_b\\) splits the current equally and gives\n\\[\nV_{\\text{out},Q}=V_{DD}-\\frac{I_1R_D}{2}.\n\\]\n\nRaising \\(V_{\\text{in}}\\) steers current toward \\(M_1\\) and away from \\(M_2\\). The drop across \\(R_D\\) falls, so **\\(V_{\\text{out}}\\) rises**. The approximate output limits are \\(V_{DD}-I_1R_D\\) and \\(V_{DD}\\), provided the current source and transistors have sufficient voltage headroom.\n\nNear the equal-current operating point, with an ideal tail current source and \\(V_b\\) fixed, the small-signal gain is\n\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{v_{\\text{in}}}\\simeq+\\frac{g_mR_D}{2}}.\n\\]\n\nThus \\(V_b\\) sets the input reference, and the circuit is noninverting with respect to \\(V_{\\text{in}}\\).",
        "format": "markdown",
        "sha256": "95a771cc6fac963573f296c6b22a02769ae2c8701ae387219fe07a6904d6f9ad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a resistor-loaded source-coupled differential pair, gives the current steering and output polarity correctly, and derives the expected non-inverting gain of approximately \\(g_mR_D/2\\).",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 3934,
        "total_tokens": 6229,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2292,
        "input_tokens": 2295,
        "output_tokens": 3934,
        "total_tokens": 6229,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output impedance, set \\(V_{\\mathrm{in}}\\) to ac ground and apply a test voltage \\(v_o\\) at the output. The gate of \\(M_1\\) is grounded through \\(R_s\\), but \\(C_{gs1}\\) couples changes in \\(v_o\\) back to that gate. Neglecting other parasitics,\n\n\\[\n\\frac{v_g}{v_o}=\\frac{sR_sC_{gs1}}{1+sR_sC_{gs1}},\n\\qquad\nZ_{\\mathrm{out}}\\simeq\n\\frac{1+sR_sC_{gs1}}{g_{m1}+sC_{gs1}}.\n\\]\n\nAt low frequencies this becomes\n\n\\[\nZ_{\\mathrm{out}}\\simeq \\frac{1}{g_{m1}}\n+s\\,\\frac{C_{gs1}(g_{m1}R_s-1)}{g_{m1}^{\\,2}}.\n\\]\n\nThus, when \\(g_{m1}R_s>1\\), the imaginary part is positive: the output looks like a resistance in series with an inductance, approximately \\(L=R_sC_{gs1}/g_{m1}\\) when \\(g_{m1}R_s\\gg1\\). Physically, output motion coupled to the gate reduces \\(M_1\\)’s restoring current, causing the test current to lag the output voltage. Other output capacitances can mask this effect at higher frequencies.",
        "format": "markdown",
        "sha256": "1d82ecbe837c65dcf4b2a8e59cf2b00255e8cf26d6e2660d2273ede6cb2d9f04"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the output impedance and explains that it rises from about 1/gm1 toward Rs, so it is inductive when Rs > 1/gm1. The stated low-frequency inductance and physical mechanism are consistent.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 4878,
        "total_tokens": 6468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4556,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1590,
        "output_tokens": 4878,
        "total_tokens": 6468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4556,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To measure \\(Z_{\\text{out}}\\), set \\(V_{\\text{in}}\\) and the bias supplies to AC ground. The gate of \\(M_1\\) then returns to ground through \\(R_S\\), while its gate–source capacitance \\(C_{gs}\\) couples it to the output.\n\nApplying a test voltage \\(v_x\\) at the output gives\n\\[\nv_g=\\frac{sR_SC_{gs}}{1+sR_SC_{gs}}v_x,\n\\qquad\nv_x-v_g=\\frac{v_x}{1+sR_SC_{gs}}.\n\\]\nIgnoring transistor output conductances and other parasitics, the test current is\n\\[\ni_x=(g_m+sC_{gs})(v_x-v_g),\n\\]\nso\n\\[\nZ_{\\text{out}}(s)=\\frac{1+sR_SC_{gs}}{g_m+sC_{gs}}.\n\\]\n\nIn this model, \\(\\operatorname{Im}Z_{\\text{out}}(j\\omega)>0\\) when \\(g_mR_S>1\\). In the useful approximation \\(g_mR_S\\gg1\\) and \\(\\omega C_{gs}\\ll g_m\\),\n\\[\nZ_{\\text{out}}\\approx \\frac{1}{g_m}+s\\frac{R_SC_{gs}}{g_m},\n\\]\nwhich looks like a resistance in series with an inductance \\(L\\approx R_SC_{gs}/g_m\\). Physically, \\(C_{gs}\\) makes the gate follow an output disturbance, so the restoring \\(g_m\\) current lags that disturbance. Other output capacitances can mask this inductive behavior.",
        "format": "markdown",
        "sha256": "12fb8151285c0059d582a7af0f3a3f76309bd4d220adbe712dc8f192634f0db0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The output-impedance expression and the condition for inductive behavior, \\(g_mR_S>1\\), are correct. The approximation gives a positive series-inductance term in the stated regime, and the gate-following explanation captures the mechanism; the high-frequency limit is implicit in the exact expression.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 3467,
        "total_tokens": 5057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 3467,
        "total_tokens": 5057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output impedance, set \\(V_{\\rm in}\\) to ac ground and apply a small test voltage \\(v_{\\rm out}\\). The gate of \\(M_1\\) is not quite at ac ground: its gate–source capacitance \\(C_{gs1}\\) couples changes in \\(v_{\\rm out}\\) through \\(R_S\\), giving\n\n\\[\nv_g=\\frac{sR_SC_{gs1}}{1+sR_SC_{gs1}}\\,v_{\\rm out}.\n\\]\n\nNeglecting other parasitics and the transistors’ output conductances, the test current is\n\\[\ni_{\\rm test}=(g_{m1}+sC_{gs1})(v_{\\rm out}-v_g),\n\\]\nso\n\\[\nZ_{\\rm out}(s)=\\frac{1+sR_SC_{gs1}}{g_{m1}+sC_{gs1}}.\n\\]\n\nAt low frequencies this is approximately\n\\[\nZ_{\\rm out}\\simeq \\frac{1}{g_{m1}}\n+s\\,\\frac{C_{gs1}}{g_{m1}}\n\\left(R_S-\\frac{1}{g_{m1}}\\right).\n\\]\nThus, if \\(g_{m1}R_S>1\\), the reactive term is **positive** for \\(s=j\\omega\\): the output looks inductive. When \\(g_{m1}R_S\\gg1\\), its approximate series inductance is \\(L\\approx R_SC_{gs1}/g_{m1}\\).\n\nPhysically, \\(C_{gs1}\\) makes the gate partly follow an output-voltage change. This delays the corresponding \\(g_m\\) current response, producing inductive reactance. Other output capacitances can mask the effect, especially at high frequencies.",
        "format": "markdown",
        "sha256": "e2c7c0a6609e11bb6d748d065356ac41205b1c8f5e02ad13cbac1fda8612d2e4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the output impedance and shows it is inductive when \\(g_{m1}R_S>1\\), with the right low-frequency inductive term and gate-following mechanism. The exact expression also gives the transition toward \\(R_S\\) at high frequencies.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 3492,
        "total_tokens": 5082,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1587,
        "input_tokens": 1590,
        "output_tokens": 3492,
        "total_tokens": 5082,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) and \\(M_2\\) are parallel NMOS pull-downs: their gates share node \\(X\\), their sources are grounded, and their drains share \\(V_{\\text{out}}\\). \\(R_{\\text{D1}}\\) pulls the output up. If a gate voltage \\(V_X\\) is established, the DC output satisfies\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_{\\text{D1}}}\n=I_{D1}+I_{D2}.\n\\]\nThe output is near \\(V_{DD}\\) when both transistors are off and falls as they turn on.\n\n**The problem is the current-source input.** Ideal MOS gates draw no DC current, and \\(X\\) has no other DC path. Kirchhoff’s current law at \\(X\\) therefore requires \\(I_{\\text{in}}=0\\) in steady state. For a nonzero constant \\(I_{\\text{in}}\\), the circuit has **no DC operating point or defined DC current-to-voltage transfer**.\n\nIn a real circuit, \\(I_{\\text{in}}\\) charges the gate capacitances, changing \\(V_X\\) and consequently \\(V_{\\text{out}}\\) over time. A bias or leakage path at \\(X\\) would be needed to establish a steady operating point.",
        "format": "markdown",
        "sha256": "e426c7f43bf36c25cff3cf4c9eaf2cdd119676dca06f291882f0b69cdf5b78ea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly recognizes M1 as a common-source stage driven by an input current at X, but misidentifies M2 as a parallel pull-down. In fact, M2’s gate is tied to Vout and its drain to X, creating the positive-feedback path and a DC current path; the claimed floating-node/no-operating-point analysis is therefore wrong.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 7020,
        "total_tokens": 9077,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 7020,
        "total_tokens": 9077,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_x=V(X)\\) and \\(v_o=V_{\\rm out}\\). Both transistors are nMOS devices with grounded sources. **\\(M_2\\)’s gate is connected to the output, while its drain is connected to \\(X\\).** Neglecting gate current, the DC operating point must satisfy\n\n\\[\nI_{\\rm in}=I_{D2}(v_{GS}=v_o,\\;v_{DS}=v_x),\\qquad\n\\frac{V_{DD}-v_o}{R_{D1}}=I_{D1}(v_{GS}=v_x,\\;v_{DS}=v_o).\n\\]\n\nFor a small input current, \\(M_1\\) is off, so \\(v_o\\simeq V_{DD}\\). Assuming \\(V_{DD}>V_{T2}\\) and \\(M_2\\) is in its triode region, the square-law model gives\n\n\\[\nI_{\\rm in}=\\beta_2\\!\\left[(V_{DD}-V_{T2})v_x-\\frac{v_x^2}{2}\\right],\n\\quad v_x<V_{T1}.\n\\]\n\nAs \\(I_{\\rm in}\\) raises \\(v_x\\), \\(M_1\\) turns on and pulls \\(v_o\\) down. That weakens \\(M_2\\), allowing \\(v_x\\) to rise further: **the feedback is positive**.\n\nThe small-signal transimpedance about an operating point is\n\n\\[\n\\frac{\\delta v_o}{\\delta i_{\\rm in}}\n=-\\frac{g_{m1}}\n{g_{ds2}(1/R_{D1}+g_{ds1})-g_{m1}g_{m2}}.\n\\]\n\nWith ordinary positive node capacitances, the operating point is stable only if\n\\[\ng_{ds2}(1/R_{D1}+g_{ds1})>g_{m1}g_{m2}.\n\\]\nThus this is not generally a linear current-to-voltage converter: increasing input current can trigger regenerative switching. In the ideal model, a sufficiently large \\(I_{\\rm in}\\) has no stable low-output DC operating point, because \\(M_2\\) cannot sink the input current once its gate voltage falls below threshold. A numerical transition current requires the supply, resistor, and transistor parameters.",
        "format": "markdown",
        "sha256": "b86114e37cfef3550754599656477d5a6769e5f1b4fb63f48523dc13acb4004c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection and the positive-feedback loop, and explains the resulting stability condition and regenerative behavior. The small-signal transimpedance and loop-gain criterion are consistent with the circuit.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 13404,
        "total_tokens": 15461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12900,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 13404,
        "total_tokens": 15461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12900,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both transistors have grounded sources. \\(M_1\\) has its gate at \\(X\\) and drain at \\(V_{\\text{out}}\\); \\(M_2\\) has its **drain at \\(X\\)** and **gate at \\(V_{\\text{out}}\\)**. Thus \\(M_2\\), not either MOS gate, provides the DC path for \\(I_{\\text{in}}\\).\n\nKirchhoff’s current law gives the operating-point equations\n\\[\nI_{\\text{in}}=I_{D2}(V_{\\text{out}},V_X),\\qquad\n\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}=I_{D1}(V_X,V_{\\text{out}}).\n\\]\nIf both NMOS transistors are on and saturated, using \\(I_D=\\tfrac12\\beta(V_{GS}-V_T)^2\\),\n\\[\nV_{\\text{out}}=V_{T2}+\\sqrt{\\frac{2I_{\\text{in}}}{\\beta_2}},\n\\qquad\nV_X=V_{T1}+\\sqrt{\\frac{2(V_{DD}-V_{\\text{out}})}{\\beta_1R_{D1}}}.\n\\]\nThese expressions apply only while the assumed operating regions hold.\n\nThere is an important stability caveat. An increase in \\(V_X\\) makes \\(M_1\\) pull \\(V_{\\text{out}}\\) down. That reduces \\(M_2\\)’s current, allowing \\(V_X\\) to rise further: **the feedback is positive**. In small signal, defining \\(g_L=1/R_{D1}+g_{o1}\\),\n\\[\n\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n=\\frac{g_{m1}}{g_{m1}g_{m2}-g_{o2}g_L}.\n\\]\nAlthough this is formally about \\(1/g_{m2}\\) when output conductances are negligible, that saturated operating point is dynamically unstable when \\(g_{m1}g_{m2}>g_{o2}g_L\\). The circuit should therefore not be assumed to work as a stable linear current-to-voltage amplifier.",
        "format": "markdown",
        "sha256": "6edc27d16cc8dca5c1e60782a808dcaf9a8b9658cbf054e69f10e00fa4664ec3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate at Vout, the positive-feedback loop, and the resulting instability; its small-signal instability condition is consistent with the circuit.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 9209,
        "total_tokens": 11266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8729,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2054,
        "input_tokens": 2057,
        "output_tokens": 9209,
        "total_tokens": 11266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8729,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **transimpedance amplifier**: \\(M_1\\) is a common-gate input stage, \\(M_2\\) is a common-source stage, and \\(R_F\\) feeds the output voltage back as a current. An increase in input current tends to raise node \\(X\\), turn \\(M_2\\) on harder, and lower \\(V_{\\rm out}\\). The resulting feedback current opposes the input-current change.\n\nFor small signals, let \\(v_s\\) be the voltage at the top of the input current source. Assume both MOSFETs are in saturation, \\(V_b\\) and \\(V_{DD}\\) are AC grounds, and transistor output resistances are negligible. Nodal analysis gives\n\\[\nv_x=g_{m1}R_{D1}v_s,\\qquad\ni_{\\rm in}=g_{m1}v_s+\\frac{v_s-v_{\\rm out}}{R_F},\n\\]\n\\[\n\\frac{v_{\\rm out}}{R_{D2}}+g_{m2}v_x+\n\\frac{v_{\\rm out}-v_s}{R_F}=0.\n\\]\n\nDefine \\(A=g_{m1}g_{m2}R_{D1}R_{D2}\\) and\n\\(D=1+g_{m1}(R_F+R_{D2})+A\\). Then\n\\[\n\\boxed{\\frac{v_{\\rm out}}{i_{\\rm in}}=\\frac{R_{D2}-AR_F}{D}},\n\\qquad\n\\boxed{R_{\\rm in}=\\frac{v_s}{i_{\\rm in}}=\\frac{R_F+R_{D2}}{D}}.\n\\]\nFor the indicated direction of \\(i_{\\rm RF}\\),\n\\[\n\\frac{i_{\\rm RF}}{i_{\\rm in}}\n=\\frac{(v_{\\rm out}-v_s)/R_F}{i_{\\rm in}}\n=-\\frac{1+A}{D}.\n\\]\n\nWith sufficiently strong loop gain, \\(v_s\\) is nearly constant, \\(i_{\\rm RF}\\approx-i_{\\rm in}\\), and the **incremental** transimpedance approaches\n\\[\n\\boxed{v_{\\rm out}\\approx -R_F i_{\\rm in}}.\n\\]\nThe absolute DC output voltage is not necessarily \\(-R_F I_{\\rm in}\\); its offset and available output swing depend on \\(V_b\\), \\(V_{DD}\\), and the transistor bias points.",
        "format": "markdown",
        "sha256": "ce4ad32a2b34142874d832a66af0902e4c03530fe25739a2e090bfdea2347334"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate input stage, the common-source stage driven by X, and RF feedback to the input node, with the correct negative-feedback behavior and limiting transimpedance. The small-signal equations are also consistent with the stated assumptions.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 14520,
        "total_tokens": 16798,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 14520,
        "total_tokens": 16798,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **transimpedance amplifier**: \\(M_1\\) is a common-gate input stage, \\(M_2\\) is a common-source gain stage, and \\(R_F\\) provides negative feedback from the output to the current-input node.\n\nFor a small-signal analysis, let \\(v_i\\) be the voltage at \\(M_1\\)’s source and \\(v_x\\) the voltage at \\(X\\). Assume both MOSFETs are in saturation, neglect their output resistances, and treat \\(V_b\\) and \\(V_{DD}\\) as AC grounds. Kirchhoff’s laws give\n\\[\nv_x=g_{m1}R_{D1}v_i,\\qquad\n\\frac{v_o}{R_{D2}}+g_{m2}v_x+\\frac{v_o-v_i}{R_F}=0,\\qquad\ni_{\\rm in}=g_{m1}v_i+\\frac{v_i-v_o}{R_F}.\n\\]\n\nDefining \\(A=g_{m1}g_{m2}R_{D1}R_{D2}\\), the **transimpedance** and input resistance are\n\\[\n\\boxed{\\frac{v_o}{i_{\\rm in}}\n=\\frac{R_{D2}-AR_F}{1+A+g_{m1}(R_F+R_{D2})}},\n\\qquad\n\\boxed{\\frac{v_i}{i_{\\rm in}}\n=\\frac{R_F+R_{D2}}{1+A+g_{m1}(R_F+R_{D2})}}.\n\\]\nThese expressions include the loading of the output by \\(R_F\\).\n\nIn the usual high-loop-gain regime—for example, \\(R_F\\gg R_{D2}\\) and \\(A\\gg 1+g_{m1}R_F\\)—the input-node *signal variation* is small and\n\\[\n\\boxed{v_o\\approx -R_F i_{\\rm in}}.\n\\]\nThus a positive incremental input current lowers the output voltage. With the leftward reference arrow shown, \\(i_{\\rm RF}\\approx-i_{\\rm in}\\): the incremental feedback current actually flows from the input node toward the output. The absolute DC output voltage also depends on the transistor bias currents, so it cannot be determined from the figure alone.",
        "format": "markdown",
        "sha256": "6f1dd145cd57977766f26a75da36b430bc3d6111db58b624bf11576db261a2a4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate input device, common-source second stage, and negative-feedback transimpedance topology. The small-signal equations and high-loop-gain result are also consistent with the circuit.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 20031,
        "total_tokens": 22309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19530,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 20031,
        "total_tokens": 22309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19530,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**This is a two-stage transimpedance amplifier.** \\(M_1\\) is a common-gate input stage; its drain voltage \\(V_X\\) drives the common-source stage \\(M_2\\). The resistor \\(R_F\\) returns output current to the input node, providing negative feedback. For a positive change in \\(I_{\\rm in}\\), \\(V_X\\) rises and \\(V_{\\rm out}\\) falls.\n\nFor a low-frequency small-signal analysis, assume both MOSFETs are in saturation, \\(V_{DD}\\) and \\(V_b\\) are AC grounds, and transistor output resistances are negligible. Let \\(v_s\\) be the voltage at the source of \\(M_1\\). Then\n\\[\nv_X=g_{m1}R_{D1}v_s,\\qquad\ni_{\\rm in}=g_{m1}v_s+\\frac{v_s-v_{\\rm out}}{R_F},\n\\]\n\\[\n\\frac{v_{\\rm out}}{R_{D2}}+g_{m2}v_X+\n\\frac{v_{\\rm out}-v_s}{R_F}=0.\n\\]\nThus the **closed-loop transimpedance** is\n\\[\n\\boxed{\\displaystyle\n\\frac{v_{\\rm out}}{i_{\\rm in}}=\n\\frac{R_{D2}\\!\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)}\n{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}} }.\n\\]\n\nWhen the amplifier gain is sufficiently high that feedback dominates, this approaches\n\\[\nv_{\\rm out}\\simeq -R_F i_{\\rm in}.\n\\]\nWith the arrow direction shown, \\(i_{\\rm RF}=(v_{\\rm out}-v_s)/R_F\\simeq-i_{\\rm in}\\): a positive input-current change flows *toward* the output through \\(R_F\\).\n\nThis is an **incremental** gain, not necessarily the DC relation. At DC, \\(R_F\\) must also carry \\(M_1\\)’s bias current:\n\\[\n\\frac{V_s-V_{\\rm out}}{R_F}=I_{\\rm in,DC}+I_{D1}.\n\\]\nThe actual bias point, available output swing, and bandwidth cannot be determined without component and transistor values.",
        "format": "markdown",
        "sha256": "b0899b8cd944cacd0fb6f1e954017519e6fe424490f1c75a04150efad40b6c5f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input, forming a transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 15601,
        "total_tokens": 17879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2275,
        "input_tokens": 2278,
        "output_tokens": 15601,
        "total_tokens": 17879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(I_B\\) be the current drawn by the **unlabelled lower current sink**, and let \\(V_x\\) be the junction of \\(M_1\\), \\(M_2\\), and the input source. Assuming an unloaded output and negligible MOS gate currents, Kirchhoff’s current law gives\n\n\\[\nI_{D1}=I_1,\\qquad I_{D2}=I_B-I_1-I_{\\rm in}.\n\\]\n\nHere \\(M_1\\) is a common-gate NMOS: its bias \\(V_b\\) and fixed drain current \\(I_1\\) hold \\(V_x\\) approximately constant. \\(M_2\\) is a PMOS whose gate is driven by \\(V_{\\rm out}\\). As \\(I_{\\rm in}\\) increases, less current is required from \\(M_2\\), so \\(V_{\\rm out}\\) rises. The circuit therefore acts as a **current-to-voltage converter with a low-impedance input node**.\n\nFor ideal, saturated MOSFETs obeying \\(I_D=\\tfrac12\\beta V_{\\rm OV}^2\\),\n\n\\[\nV_x=V_b-V_{Tn}-\\sqrt{\\frac{2I_1}{\\beta_n}},\n\\qquad\n\\boxed{V_{\\rm out}=V_{DD}-|V_{Tp}|\n-\\sqrt{\\frac{2(I_B-I_1-I_{\\rm in})}{\\beta_p}}}.\n\\]\n\nConsequently, its small-signal transimpedance is \\(dV_{\\rm out}/dI_{\\rm in}=1/g_{m2}\\). These expressions require \\(I_B-I_1-I_{\\rm in}>0\\) and sufficient voltage headroom to keep the transistors in saturation. Because \\(I_B\\) and the device parameters are not specified, a numerical output voltage cannot be determined.",
        "format": "markdown",
        "sha256": "9d5163d035a505c015d9de9d8a05387fe30125e713d25a75079fe63b8e10921e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies M1 as the common-gate NMOS and M2 as the Vout-driven PMOS feeding back at the input node, and gives the low-input-impedance current-to-voltage behavior with dVout/dIin ≈ 1/gm2. The added operating-point equations do not undermine the essential analysis.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 7507,
        "total_tokens": 9674,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7107,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2167,
        "output_tokens": 7507,
        "total_tokens": 9674,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7107,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(I_B\\) be the current drawn by the unlabeled sink at the bottom, and let \\(V_x\\) be the node where \\(I_{\\rm in}\\), \\(M_1\\), and \\(M_2\\) meet. \\(M_1\\) is an NMOS biased by \\(V_b\\); \\(M_2\\) is a PMOS whose gate is driven by \\(V_{\\rm out}\\).\n\nWith negligible MOS gate current and ideal current sources, Kirchhoff’s current law gives\n\\[\nI_{D1}=I_1,\\qquad\nI_{D2}=I_B-I_1-I_{\\rm in}.\n\\]\nThus \\(I_1\\) fixes \\(M_1\\)’s gate–source voltage, holding the input node approximately at\n\\[\nV_x=V_b-V_{GS1}(I_1).\n\\]\nThe output adjusts to make \\(M_2\\) supply the remaining current:\n\\[\nV_{\\rm out}=V_{DD}-V_{SG2}(I_B-I_1-I_{\\rm in}).\n\\]\n\nFor long-channel transistors in saturation, with \\(\\beta_p=\\mu_p C_{\\rm ox}(W/L)_2\\),\n\\[\nV_{\\rm out}\\simeq V_{DD}-|V_{TP}|\n-\\sqrt{\\frac{2(I_B-I_1-I_{\\rm in})}{\\beta_p}},\n\\qquad\n\\frac{dV_{\\rm out}}{dI_{\\rm in}}\\simeq\\frac{1}{g_{m2}}.\n\\]\nIncreasing \\(I_{\\rm in}\\) therefore **raises \\(V_{\\rm out}\\)**: \\(M_2\\) must supply less current, so its gate voltage rises. Feedback keeps \\(V_x\\) nearly constant, making this a low-input-impedance current-to-voltage stage. These relations require \\(I_B-I_1-I_{\\rm in}>0\\) and sufficient voltage headroom for the transistors to remain in the assumed operating region.",
        "format": "markdown",
        "sha256": "51680c66f7b633a578909a750b423d9905b2e3ba3ed72def7474de89249a8998"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS input device and PMOS feedback device, explains the low-input-impedance current-to-voltage action, and derives the expected transfer magnitude dVout/dIin ≈ 1/gm2. The stated operating-region assumptions are appropriate.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 10241,
        "total_tokens": 12408,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9808,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 10241,
        "total_tokens": 12408,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9808,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(I_B\\) denote the **unlabeled current sink** at the lower node, and let that node’s voltage be \\(V_x\\). With no load connected to \\(V_{\\text{out}}\\), the output current source forces \\(I_1\\) through the NMOS transistor \\(M_1\\). Kirchhoff’s current law at \\(V_x\\) then gives the PMOS current through \\(M_2\\):\n\n\\[\nI_{M_1}=I_1,\\qquad I_{M_2}=I_B-I_1-I_{\\rm in}.\n\\]\n\nIf both transistors operate in saturation, using the long-channel square-law model with \\(\\beta_i=\\mu_i C_{\\rm ox}(W/L)_i\\),\n\n\\[\nV_x=V_b-V_{TN1}-\\sqrt{\\frac{2I_1}{\\beta_1}},\n\\]\n\n\\[\nV_{\\rm out}=V_{DD}-|V_{TP2}|\n-\\sqrt{\\frac{2(I_B-I_1-I_{\\rm in})}{\\beta_2}}.\n\\]\n\nThus \\(M_1\\) holds the input-node voltage approximately constant, while \\(M_2\\) converts changes in input current to output voltage. In particular, **increasing \\(I_{\\rm in}\\) increases \\(V_{\\rm out}\\)**, with small-signal transimpedance\n\n\\[\n\\frac{dV_{\\rm out}}{dI_{\\rm in}}=\\frac{1}{g_{m2}}.\n\\]\n\nThese results require \\(I_B>I_1+I_{\\rm in}\\), sufficient voltage compliance, and both MOSFETs to remain in saturation. A numerical output cannot be determined because the sink current and transistor parameters are not specified.",
        "format": "markdown",
        "sha256": "ac5b23a90f32352113ab2cfe94a816b55c8aa5b4b798786f0358357e7d2585cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gets the NMOS/PMOS polarities, input-node current balance, stiff-input-node behavior, and the correct positive transimpedance of approximately 1/gm2. However, it does not clearly explain the essential feedback path from Vout through M2 back to the input node, so the circuit mechanism is only partly described.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 8555,
        "total_tokens": 10722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8180,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2164,
        "input_tokens": 2167,
        "output_tokens": 8555,
        "total_tokens": 10722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8180,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No finite value of \\(C_L\\) inherently stops this three-inverter ring oscillator. Larger capacitors take longer to charge and discharge, increasing each inverter’s delay and lowering the oscillation frequency (approximately \\(f\\propto 1/C_L\\)).\n\nIn the *limit* \\(C_L\\to\\infty\\), the frequency tends to zero: the outputs cannot change in finite time. Real components may also impose practical limits before that ideal limit is reached.",
        "format": "markdown",
        "sha256": "9b3013421767fe315979413f0adbf76e0b46f3edf5967df062ae87d7311f5661"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that increasing all three capacitances slows the ring and lowers its frequency without stopping oscillation for any finite capacitance; the frequency tending to zero in the infinite-capacitance limit is consistent with the answer.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 1654,
        "total_tokens": 3851,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 1654,
        "total_tokens": 3851,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—not solely because the three capacitors are **arbitrarily large but finite**. Each inverter can still charge or discharge its load past the next inverter’s switching threshold; it just takes longer. The oscillation period grows roughly in proportion to \\(C_L\\), so the frequency approaches zero as \\(C_L\\) grows.\n\nAt the idealized limit \\(C_L=\\infty\\), the node voltages cannot change in finite time, so oscillation stops. In a real circuit, leakage or other nonidealities may impose a practical limit sooner.",
        "format": "markdown",
        "sha256": "78e13922d5e0b28b28559b7554b9b158d1f91b224ccb2d9ecc9da0c2d41f7739"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that any finite increase in all three capacitances slows the ring, with period roughly proportional to capacitance, but does not stop oscillation. The exact-infinite-capacitance caveat is a consistent limiting-case distinction.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 3114,
        "total_tokens": 5311,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2995,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 3114,
        "total_tokens": 5311,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2995,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—not solely because the three capacitors are large. For any **finite** \\(C_L\\), the inverters can still charge and discharge them, but each transition takes longer. For a three-inverter ring, \\(T \\approx 6t_{\\mathrm{pd}}\\), and the propagation delay grows roughly in proportion to \\(C_L\\).\n\nThus the oscillation frequency approaches zero as \\(C_L\\) grows. At *infinite* capacitance, the node voltages cannot change in finite time, so there is no oscillation. Real components may also introduce leakage or other practical limits.",
        "format": "markdown",
        "sha256": "ae2c6cbd91f0b7238058012ef17cba71e0db126c8ca4b08987420be251b28718"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the ring continues oscillating for arbitrarily large finite capacitance, with delay increasing and frequency tending toward zero. The exact-infinite-capacitance caveat does not change the answer for arbitrarily large finite capacitors.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 3226,
        "total_tokens": 5423,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3098,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2194,
        "input_tokens": 2197,
        "output_tokens": 3226,
        "total_tokens": 5423,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3098,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the inverters and their noise are unchanged, doubling all three load capacitors roughly doubles each stage’s delay and halves the oscillation frequency. At a **fixed frequency offset** from the carrier, the phase noise is then about **6 dB lower** (one-quarter the noise power). This estimate assumes the shown capacitors dominate the load; it does not imply the same improvement at an offset scaled with the new oscillation frequency.",
        "format": "markdown",
        "sha256": "71c656df733d22260ec7917bf7cc409cd689130a229ff702aae3dd0f23efdfce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubled capacitance halves the oscillation frequency and gives about a 6 dB phase-noise reduction at fixed offset, with the appropriate fixed-relative-offset caveat.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 5791,
        "total_tokens": 7985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2194,
        "output_tokens": 5791,
        "total_tokens": 7985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the inverters and supply are unchanged, doubling all three load capacitors roughly doubles each stage’s delay and halves the oscillation frequency. In the usual noise model, **phase noise at the same offset in hertz falls by about 6 dB** (a factor of four in noise power).\n\nThat comparison depends on the offset: at the same *fractional* offset from the carrier, the idealized phase noise is approximately unchanged.",
        "format": "markdown",
        "sha256": "123cc3a4cee3d2bc251583bb7efbd81d67acb46defa157fd1aae066f418b3ffc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors roughly halves the oscillation frequency and reduces phase noise by about 6 dB at a fixed offset, while noting it is unchanged at a fixed fractional offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 5206,
        "total_tokens": 7400,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5110,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 5206,
        "total_tokens": 7400,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5110,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the inverters and their noise remain unchanged, doubling all three \\(C_L\\) roughly halves the oscillation frequency. A given noise charge then produces half the phase disturbance, so **phase noise at the same absolute frequency offset falls by about 6 dB** (a factor of four in noise power).\n\nIf instead you compare at the same *fractional* offset from each oscillator’s carrier, the phase noise is approximately unchanged.",
        "format": "markdown",
        "sha256": "3259ce353e168e54b63fbb10f7753c4a02a4ad619b0f0be9656f113c3b75816c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and lowers phase noise by about 6 dB at a fixed absolute offset, while it is unchanged at a fixed fractional offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 3088,
        "total_tokens": 5282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2993,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2191,
        "input_tokens": 2194,
        "output_tokens": 3088,
        "total_tokens": 5282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2993,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. A sufficiently large \\(C_L\\) can stop a real three-inverter ring oscillator, rather than merely slow it down. The loaded node then changes so slowly that the other two inverters effectively track it and feed it back to the first inverter, creating stable negative feedback near the inverters’ switching point.\n\nAn ideal hard-switching model would predict oscillation for any *finite* \\(C_L\\); that model misses the finite gain and response time that allow the real circuit to settle.",
        "format": "markdown",
        "sha256": "f12bbaa05127b61b44cb4f5fb87da59cfdc8993ce669da4966b359fdee5cb1ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says sufficiently large loading can stop oscillation and explains that the slow node lets the remaining loop settle near a stable operating point. This matches the accepted time-domain explanation of the dominant-pole and finite-gain effect.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 5803,
        "total_tokens": 7855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 5803,
        "total_tokens": 7855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. With real, finite-gain inverters, a sufficiently large \\(C_L\\) can **stop** oscillation, not merely slow it. The loaded output changes so slowly that the other two inverters follow it and provide stabilizing negative feedback; the circuit can settle near the inverters’ switching voltages.\n\nAn ideal digital-delay model gives a different prediction: every *finite* \\(C_L\\) only increases delay, while \\(C_L=\\infty\\) prevents the loaded node from changing.",
        "format": "markdown",
        "sha256": "9595fd85344ab408ba0798226607d797a1c12f423965abc63400338f7c9f4624"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says sufficiently large load capacitance can stop oscillation and gives the allowed time-domain explanation: the loaded node becomes slow and the finite-gain loop can settle near a DC operating point. The ideal-delay-model caveat does not contradict this conclusion.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 5288,
        "total_tokens": 7340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 5288,
        "total_tokens": 7340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. With a sufficiently large \\(C_L\\), the first inverter’s output changes so slowly that the other two inverters respond almost immediately. They then feed back a signal that opposes further change, allowing an ordinary CMOS circuit to settle near the inverters’ switching voltage instead of oscillating.\n\nAn ideal pure-delay model would predict ever-slower oscillation for any finite \\(C_L\\), but it misses this possible stable analog state.",
        "format": "markdown",
        "sha256": "3462f53cc49bc2bf2885cd435ebd1563a550923c1c1586f8c71ed1cd2f868b43"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large one-node loading can stop oscillation and gives the accepted time-domain explanation: the loaded node becomes very slow, allowing the loop to settle near a switching-point operating state.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 5273,
        "total_tokens": 7325,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2049,
        "input_tokens": 2052,
        "output_tokens": 5273,
        "total_tokens": 7325,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the stage capacitances scale with device width, doubling both NMOS and PMOS widths leaves the oscillation frequency roughly unchanged but doubles power consumption. The phase-noise power at a given offset is then approximately halved—an **improvement of 3 dB**.",
        "format": "markdown",
        "sha256": "dd059b446d36e5946f02009d6a93e475f700e41054f3a0adf26ddb8f0c23545f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that phase noise is halved, a 3 dB improvement, and gives a consistent width-scaling explanation.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3327,
        "output_tokens": 1567,
        "total_tokens": 4894,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3327,
        "output_tokens": 1567,
        "total_tokens": 4894,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling every NMOS and PMOS width should **reduce the intrinsic phase noise by about 3 dB** at a given offset frequency. Drive current and node capacitance both roughly double, leaving the oscillation frequency about the same, while noise-induced timing variance is roughly halved. This assumes device noise dominates and other loads remain negligible.",
        "format": "markdown",
        "sha256": "c7c12e96d90aed2e65953e22c4fe8ad4869f9a3c3534f1d46285568285f43863"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives an approximately 3 dB phase-noise reduction and a consistent scaling explanation: drive current and node capacitance double while frequency stays about the same.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 1700,
        "total_tokens": 5027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1625,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 1700,
        "total_tokens": 5027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1625,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling both NMOS and PMOS widths in every stage should **improve phase noise by about 3 dB** (halve its power spectral density), assuming the node capacitances scale with device width. Drive current and capacitance then both roughly double, leaving the oscillation frequency nearly unchanged, while power consumption roughly doubles. Fixed external loads could change the exact result.",
        "format": "markdown",
        "sha256": "ee330fd5bf42402251cee40cfe534528f5eaefe82b221324ec2880554596527e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives an approximately 3 dB phase-noise reduction and the expected width-scaling effects on current, capacitance, frequency, and power.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 1916,
        "total_tokens": 5243,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1835,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3324,
        "input_tokens": 3327,
        "output_tokens": 1916,
        "total_tokens": 5243,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1835,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The diagram alone does not determine a small-signal resistance: the supply current changes with both supply voltage and oscillation frequency.\n\nFor a **low-frequency perturbation**, if each of the three inverters charges an effective load capacitance \\(C_L\\) once per cycle, and short-circuit and leakage currents are neglected,\n\\[\n\\overline I_{DD}=3C_LV_{DD}f_{\\rm osc}(V_{DD}).\n\\]\nThus, at the operating voltage,\n\\[\n\\boxed{R_X=\\left(\\frac{d\\overline I_{DD}}{dV_{DD}}\\right)^{-1}\n=\\frac{1}{3C_L\\left(f_{\\rm osc}+V_{DD}\\,\\dfrac{df_{\\rm osc}}{dV_{DD}}\\right)}.}\n\\]\nThe load capacitance and the frequency’s dependence on supply voltage are not given, so a unique value for \\(R_X\\) cannot be calculated.",
        "format": "markdown",
        "sha256": "9c4a52a6a2af05e0e47db1f846899997b5644bf822adb34fcf5f3a2afef73b87"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies oscillation-driven charging of the three load capacitances and derives the incremental supply resistance from the average-current relation, including the dependence of frequency on supply voltage.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3147,
        "output_tokens": 8221,
        "total_tokens": 11368,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8014,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3147,
        "output_tokens": 8221,
        "total_tokens": 11368,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8014,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The diagram alone does not determine \\(R_X\\): an inverter symbol specifies neither its supply current nor how the oscillator frequency changes with supply voltage.\n\nFor a **low-frequency, averaged** measurement, the small-signal resistance is\n\\[\nR_X=\\left(\\frac{d\\overline I_{\\rm DD}}{dV_{\\rm DD}}\\right)^{-1}.\n\\]\nFor example, if each stage drives a capacitance \\(C_L\\) and switching current dominates, \\(\\overline I_{\\rm DD}\\approx 3C_LV_{\\rm DD}f(V_{\\rm DD})\\), so\n\\[\nR_X\\approx\n\\frac{1}{3C_L\\!\\left(f+V_{\\rm DD}\\,\\frac{df}{dV_{\\rm DD}}\\right)}.\n\\]\nAn inverter model and operating point are needed to evaluate it.",
        "format": "markdown",
        "sha256": "2b0088fb7695daf8ce2aa2012096b29598edf1d4f1c2c2602672212a36c20d54"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies switching of the three load capacitances as the supply-current mechanism and derives the incremental resistance including frequency dependence. This is the accepted refinement of the golden result.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 9739,
        "total_tokens": 12886,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 9739,
        "total_tokens": 12886,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure does not specify a unique \\(R_X\\). For a slowly varying supply, the small-signal resistance is\n\n\\[\nR_X=\\left(\\frac{d\\overline I_{\\mathrm{DD}}}{dV_{\\mathrm{DD}}}\\right)^{-1},\n\\]\n\nwhere \\(\\overline I_{\\mathrm{DD}}\\) is the oscillator’s average supply current. If each identical inverter is modeled as having an incremental supply resistance \\(r\\), the three stages give \\(R_X=r/3\\). The inverter characteristics and operating conditions needed to find \\(r\\) are not shown.",
        "format": "markdown",
        "sha256": "c33aa72a78e69ae1b1714fc6e1c35de1cb9f197ebc6d8541b0c1acabe0bad1db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The incremental-resistance definition is relevant, but the answer treats the oscillator as three static stage resistances and claims the result is underdetermined. It misses the dominant supply current from periodically charging and discharging the three load capacitors, which gives approximately \\(R_X=1/(3f_0C_L)\\) (or a frequency-dependent refinement).",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 11525,
        "total_tokens": 14672,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3144,
        "input_tokens": 3147,
        "output_tokens": 11525,
        "total_tokens": 14672,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The expression is the **DC small-signal resistance at the symmetric, nonoscillating operating point**. There, all three inverter nodes have the same voltage, so each inverter is *incrementally* equivalent to a diode-connected PMOS and NMOS in series. That operating point is unstable in a working ring oscillator.\n\nWhile the ring oscillates, its transistors switch and its supply current comes in pulses, including current used to charge node capacitances. Its supply port therefore has no single, frequency-independent resistance given by those \\(g_m\\) values. If you mean the response to a very slow supply change, the relevant quantity is\n\\[\nR_{\\mathrm{LF}}=\\left(\\frac{d\\overline{I}_{DD}}{dV_{DD}}\\right)^{-1},\n\\]\nwhere \\(\\overline{I}_{DD}\\) is the **average current of the running oscillator**. That derivative includes changes in oscillation frequency and generally differs from the quoted result. The quoted result remains valid only for linearization about the static operating point, not as the running oscillator’s supply resistance.",
        "format": "markdown",
        "sha256": "5487749a3d83eea4839f11915f43f85c6aed00d18b29661ede6931c73831cd9a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly distinguishes the static operating point and mentions capacitive charging, but does not derive the oscillating resistance or show that it remains on the order of the MOS on-resistance. Instead, it says the running-oscillator resistance generally differs, missing the key conclusion that it is not much higher than the static estimate.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 6454,
        "output_tokens": 10822,
        "total_tokens": 17276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10356,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3227,
        "output_tokens": 5411,
        "total_tokens": 8638,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—**if \\(R_X\\) is meant to describe the running oscillator**. The quoted expression is the DC small-signal result about the symmetric operating point, where all three inverter inputs and outputs have the same voltage. That point still exists when the ring oscillates, but it is unstable; linearizing about it does not describe the oscillation.\n\nDuring oscillation, the gate and drain voltages do not track as they would in the “diode-connected” argument, and the supply delivers switching current. For a *slow* supply perturbation, a useful definition is\n\n\\[\nR_{X,\\mathrm{LF}}=\\left(\\frac{d\\langle I_{DD}\\rangle}{dV_{DD}}\\right)^{-1},\n\\]\n\nwhere \\(\\langle I_{DD}\\rangle\\) is the cycle-averaged current. It depends on the waveform, load capacitance, and how oscillation frequency changes with supply voltage—not just on \\(g_{mn}\\) and \\(g_{mp}\\). At other perturbation frequencies, the supply impedance is frequency-dependent as well.",
        "format": "markdown",
        "sha256": "5da1a14927ec9cfd1a5ae6d9821e355afa0372beffdb235cd003a62c3d5d39f0"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that the static small-signal analysis does not describe the oscillating state, but it does not give the capacitive charging-current estimate or establish that RX remains on the order of the MOS on-resistance rather than becoming much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 6448,
        "input_tokens": 6454,
        "output_tokens": 12742,
        "total_tokens": 19196,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12276,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 6371,
        "total_tokens": 9598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6138,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends on the operating state. The quoted \\(R_X\\) is the **DC small-signal resistance at the symmetric fixed point**, where all three inverter inputs and outputs have the same voltage. At that point the devices are *effectively* diode-connected. That calculation remains valid even if the fixed point is unstable and the circuit would start oscillating.\n\nIt is **not**, however, generally the supply resistance of the *running* oscillator. During oscillation the inverter inputs and outputs differ, the transistor \\(g_m\\)’s vary with time, and the supply draws switching current. For a slow supply perturbation, a useful definition is\n\\[\nR_{X,\\mathrm{LF}}=\\left(\\frac{d\\langle I_{\\rm supply}\\rangle}{dV_{\\rm DD}}\\right)^{-1}.\n\\]\nFor example, if charging a capacitance \\(C\\) at each of the three outputs dominates, then \\(\\langle I_{\\rm supply}\\rangle\\approx 3CV_{\\rm DD}f(V_{\\rm DD})\\)—not the current predicted by three diode-connected branches. At other perturbation frequencies, the supply impedance is frequency-dependent.",
        "format": "markdown",
        "sha256": "fd5c0383aa2d4054ae9129df2bea01eeab7ca436367030f1070f851c81b5764f"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the switching-capacitance mechanism and distinguishes the fixed-point resistance from the running oscillator’s supply response. But it does not derive the oscillating RX or establish the key conclusion that RX remains on the order of the MOS on-resistance rather than becoming much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 6448,
        "input_tokens": 6454,
        "output_tokens": 11452,
        "total_tokens": 17906,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10954,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3224,
        "input_tokens": 3227,
        "output_tokens": 5726,
        "total_tokens": 8953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5477,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain **decreases** as M7 is widened. A wider M7 supplies more tail current, so the circuit reaches regeneration sooner, leaving less time for the input pair to build an initial voltage difference.",
        "format": "markdown",
        "sha256": "770faa23399144d1c1677da53016573496bbe169eefd0a4cc5eb0f896fa1d210"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that initial gain decreases and explains that a wider M7 increases tail current and shortens the integration interval before regeneration, reducing the voltage difference built by the input pair.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 3674,
        "total_tokens": 8477,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 3674,
        "total_tokens": 8477,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain **decreases** as M7 gets wider. A wider M7 increases the tail current, so the internal nodes discharge faster and the input pair has less time to develop a differential voltage before regeneration begins.",
        "format": "markdown",
        "sha256": "053747b631dc0168d4937b40642db87e0d5c23c8b39333a72503e32b19617169"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that wider M7 increases tail current and reduces the time available to build differential voltage before regeneration, consistent with the decrease in initial gain.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 4711,
        "total_tokens": 9514,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 4711,
        "total_tokens": 9514,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain **decreases** as M7 gets wider. A wider M7 supplies more tail current, so the internal nodes discharge faster and the input pair has less time to build an initial differential voltage before regeneration begins.",
        "format": "markdown",
        "sha256": "6e4f978d5155590ac335b367f41a24d46db0d375eb32d057fb39d5debdf37e5b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correct trend and physically consistent explanation: a wider M7 increases tail current, shortening the integration interval and reducing the initial differential voltage built before regeneration.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 2122,
        "total_tokens": 6925,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 2122,
        "total_tokens": 6925,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain is approximately **unchanged**. Larger, matched capacitances at P and Q slow their discharge, but they also lengthen the initial interval before the latch turns on by the same proportion. The main effect is a slower decision.",
        "format": "markdown",
        "sha256": "3df6e73661d480b3f55aac01d6dfb92131c22510350a74a6a17a2514790eb4c1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the initial gain remains approximately unchanged: the larger capacitance slows discharge while proportionally lengthening the amplification interval, mainly slowing the decision.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 13004,
        "total_tokens": 17807,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4803,
        "output_tokens": 13004,
        "total_tokens": 17807,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain decreases. Larger capacitance at P and Q means the same input-current difference produces a smaller initial voltage difference there, so the latch starts with less signal to amplify.",
        "format": "markdown",
        "sha256": "8a2190ed24024ea3fab5595ae2adcb56464b37141b77fb6fc5b51ff97d1727b3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite the essential result: increasing capacitance slows the transient but leaves the initial gain approximately unchanged because the longer amplification interval cancels the smaller voltage slope. The answer identifies the slope effect but mistakes it for a gain reduction.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 3168,
        "total_tokens": 7971,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3125,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 3168,
        "total_tokens": 7971,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3125,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain stays approximately the same, assuming the capacitances at P and Q increase equally. The larger capacitance slows their discharge, but also gives the input pair proportionally more time to develop a voltage difference before regeneration begins. The comparator therefore becomes slower, rather than gaining or losing initial gain.",
        "format": "markdown",
        "sha256": "a2a6a3790a6b35319ee581623b02b2c562a7b4b9b76c91de696d7c3066407e42"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the initial gain remains approximately unchanged: increased capacitance slows discharge but proportionally extends the amplification phase, while making the comparator slower.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 6281,
        "total_tokens": 11084,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4800,
        "input_tokens": 4803,
        "output_tokens": 6281,
        "total_tokens": 11084,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing M5 and M6 generally **degrades the overall decision speed**. They are initially off, so making them wider mainly adds capacitance to X and Y, slowing the voltage change that starts regeneration. Wider devices do strengthen the later positive feedback, however, so there is an optimum size rather than a universal rule.",
        "format": "markdown",
        "sha256": "b8e5e080682d573a6fceb03e5993ef810bc8901132a3fe5e9c4cd880d1e0a38e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the added-capacitance limit and stronger positive feedback, but reverses the key initial trend: wider M5/M6 initially improve speed because stronger regeneration dominates.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 5190,
        "total_tokens": 9992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5119,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4802,
        "output_tokens": 5190,
        "total_tokens": 9992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5119,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Not necessarily. Wider M5/M6 strengthen the PMOS positive feedback, which can speed regeneration, but they also add capacitance to nodes X and Y, slowing the initial discharge. There is an optimum width: increasing them may help if they are too small, but making an adequately sized pair wider can **degrade overall speed**.",
        "format": "markdown",
        "sha256": "be0b7a8c783a9a694c057e67bed54f74f0afdcc683c817d27548e78a1cd7df8c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It captures stronger PMOS regeneration, the added-capacitance tradeoff, and an optimum width: widening can help when undersized, while further widening can degrade speed.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 6709,
        "total_tokens": 11511,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6635,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 6709,
        "total_tokens": 11511,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6635,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of M5 and M6 strengthens the cross-coupled positive feedback, so it can **improve regeneration speed**. But it also increases capacitance at X and Y, slowing the initial voltage change. Thus speed improves only up to an optimum width; making them too large can degrade it.",
        "format": "markdown",
        "sha256": "77db6ebe3b4174920029f7b15cde7159bf04c7bb4a59fbd79a6a82a20018a59b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that stronger cross-coupled regeneration improves speed up to an optimum, while added node capacitance eventually limits or reverses the benefit.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 4189,
        "total_tokens": 8991,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4120,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4799,
        "input_tokens": 4802,
        "output_tokens": 4189,
        "total_tokens": 8991,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4120,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Neither is guaranteed. Wider clocked transistors have lower on-resistance, which can make the enabled stages switch faster. But they also add capacitance at \\(X\\) and \\(Y\\) and load the clock signals, which can slow the circuit. Speed may improve at first and then degrade beyond an optimum width; the figure alone does not establish which effect dominates.",
        "format": "markdown",
        "sha256": "03a4e14ef76cb3531fda263c2094b775b8ecd3bb74ebf0e426fd2305b3a65bb3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the initial benefit from reduced on-resistance and the eventual capacitance penalty, describing improvement followed by a possible optimum and reversal. Its caveat that the net effect depends on sizing is allowed by the full-credit rule.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 3705,
        "total_tokens": 5768,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2063,
        "output_tokens": 3705,
        "total_tokens": 5768,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The schematic alone doesn’t determine whether speed improves or degrades. Wider clocked transistors have lower on-resistance, which can speed the transitions at \\(X\\) and \\(Y\\). But they also add capacitance to those nodes and load \\(CK\\) and \\(\\overline{CK}\\), which can slow the circuit.\n\nIf the clocked transistors are initially too small, widening them may help; beyond an optimum, further widening degrades speed.",
        "format": "markdown",
        "sha256": "458bfb76f95748e1657271dceb1ebf981c576237f27e580126519a9d448db776"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the initial benefit from reduced on-resistance and the capacitance penalty that limits or reverses the benefit beyond an optimum; its sizing caveat is consistent with the golden solution’s full-credit rule.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 4761,
        "total_tokens": 6824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 4761,
        "total_tokens": 6824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends on their starting widths. Wider clocked transistors have lower on-resistance, so they can switch \\(X\\) and \\(Y\\) faster. But they also add capacitance to those nodes and to the clock lines, while the other transistors in each series path remain unchanged.\n\n**There is an optimum width:** increasing a narrow clocked transistor can improve speed; widening it beyond that optimum degrades speed. The figure alone does not establish which side of the optimum the circuit is on.",
        "format": "markdown",
        "sha256": "af62d63ef2ef7da0bf9aeab10d35b71735111879e9f7ccc35cda21d062ce9648"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by reducing on-resistance, while added capacitance eventually limits or reverses the benefit; noting that the actual design may lie on either side of the optimum is consistent with the golden solution.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 4768,
        "total_tokens": 6831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2060,
        "input_tokens": 2063,
        "output_tokens": 4768,
        "total_tokens": 6831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The two clocked stages update on opposite edges of \\(CK\\), so \\(X\\) and \\(Y\\) each run at half the clock frequency. With a 50% duty-cycle clock, their transitions are separated by one-quarter of their output period—**90°**, making them quadrature outputs. \\(Z\\) is the complement of \\(Y\\).",
        "format": "markdown",
        "sha256": "38ecc70e4564fac07b6bf3873af456c37f151ff8fb4e0a34a6ab72f0da6ade44"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature from opposite-edge switching, but omits why the outputs are not exactly in quadrature: inverter delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 2497,
        "total_tokens": 4545,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2414,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2048,
        "output_tokens": 2497,
        "total_tokens": 4545,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2414,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The two stages update on opposite clock phases, so \\(X\\) and \\(Y\\) switch on opposite edges and run at half the clock frequency. With a 50% duty-cycle clock, they are 90° apart—quadrature outputs. \\(Z\\) is the complement of \\(Y\\).",
        "format": "markdown",
        "sha256": "82dc1cc9fab837b5ae8be5b0a5700f8f28cabf79b0ed91ab192b5804adbd134f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature, but omits the inverter delay and unequal latch loading that make the outputs not exactly in quadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 3177,
        "total_tokens": 5225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 3177,
        "total_tokens": 5225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The two clock-gated stages update on opposite clock phases, while \\(Z=\\overline{Y}\\) feeds back to the first stage. As a result, \\(X\\) and \\(Y\\) each run at half the clock frequency and are nominally **90° apart** with a 50% duty-cycle clock. \\(Y\\) and \\(Z\\) are complementary, not quadrature.",
        "format": "markdown",
        "sha256": "f65203c7faf08a14bed5a103444fba634146c402051ca5fb39953c8892708bee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal quadrature between X and Y from the opposite-phase divide-by-two stages, but omits why the actual phase relation is not exact: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 2161,
        "total_tokens": 4209,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2045,
        "input_tokens": 2048,
        "output_tokens": 2161,
        "total_tokens": 4209,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing their widths does **not** guarantee a speed improvement. Wider clocked transistors have lower on-resistance, which can make the clocked inverters switch faster, but they also add capacitance to the clock and internal nodes. With a strong clock driver, speed may improve; with a limited driver—or beyond an optimum width—it can degrade.",
        "format": "markdown",
        "sha256": "bf51e3e8f420c485e8172bc659950a0e7c5e36804e9f33e777a093f577d08619"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the beneficial lower on-resistance, but gives no clear expected trend and overstates clock/internal-node capacitance as a counterweight. It misses that the clocked devices add little loading to the data path; charge sharing, which degrades swing acceptably up to a point, is the relevant limitation.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4260,
        "output_tokens": 13616,
        "total_tokens": 17876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2130,
        "output_tokens": 6808,
        "total_tokens": 8938,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the clocked transistors’ widths **usually improves the circuit’s intrinsic switching speed**: their lower on-resistance lets the internal nodes charge and discharge faster.\n\nIt is not an unlimited improvement. Wider devices also add capacitance to \\(CK\\) and \\(\\overline{CK}\\), so a finite-strength clock driver may become slower. Beyond some width, overall speed can therefore degrade.",
        "format": "markdown",
        "sha256": "b8b78ede8d4147b0b38da07c5248113ecfbc164d14b53d6016aa38c69e1bc402"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly says wider clocked transistors improve speed initially because their lower on-resistance helps switching. It omits charge sharing, the key swing degradation noted in the solution, and instead cites clock-driver loading as a possible high-width limit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4254,
        "input_tokens": 4260,
        "output_tokens": 8456,
        "total_tokens": 12716,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8284,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 4228,
        "total_tokens": 6358,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the clocked transistors’ widths lowers their on-resistance, so the clocked inverters can switch faster. But it also increases the capacitance that the clock and complementary clock must drive.\n\n**So speed does not change in one guaranteed direction:** with ideal clock drivers, it generally improves and then levels off; with real drivers, excessive upsizing can slow the clock edges and degrade overall speed.",
        "format": "markdown",
        "sha256": "077bc3ad67500453f4eb57ae557737ac4b102a0228cc507ed803276e26e60756"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that lower on-resistance generally improves speed and notes clock loading as a possible limit, but omits the key charge-sharing effect.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4254,
        "input_tokens": 4260,
        "output_tokens": 7422,
        "total_tokens": 11682,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7248,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2127,
        "input_tokens": 2130,
        "output_tokens": 3711,
        "total_tokens": 5841,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows three inverters in a feedback loop, interrupted by switches controlled by \\(CK\\) and its complement \\(\\overline{CK}\\). Because the switches conduct on opposite clock phases, the loop is not continuously closed.\n\nWhen \\(CK\\) is high, the first inverter receives the current output \\(Q\\) and produces \\(\\neg Q\\). When \\(CK\\) goes low, that value passes through the other two inverters, which leave it unchanged overall. Thus \\(Q_{\\text{next}}=\\neg Q\\): **the output toggles once per clock cycle**, giving a divide-by-two output rather than a free-running ring oscillator. This assumes the disconnected nodes retain their values between phases.",
        "format": "markdown",
        "sha256": "7fd214b53c8b725f3191b4be64429fca07e1188619c2cdb5153f0416191a2e44"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit’s divide-by-two behavior and describes phase-controlled switches with stored values, capturing its dynamic-latch operation. The detailed inverter-path explanation is not required for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 2490,
        "total_tokens": 3780,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2338,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1290,
        "output_tokens": 2490,
        "total_tokens": 3780,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2338,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The three inverters form an odd-inversion feedback loop, but the complementary switches prevent the entire loop from being connected at once. Assuming an open switch’s downstream inverter input retains its value:\n\n- When **CK is high**, the left switch closes. The first inverter produces the complement of the held feedback value.\n- When **CK goes low**, the left switch opens and the \\(\\overline{CK}\\) switch closes. The new value passes through the other two inverters, which preserve its polarity, and becomes the feedback value.\n\nThe feedback output therefore **toggles on each falling edge of CK**. This is a dynamic divide-by-two (T-flip-flop-like) arrangement, not a free-running ring oscillator.",
        "format": "markdown",
        "sha256": "b536d5540996b53e171f066c922ac2b35de58663221114e55d12bd5551468b39"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic divide-by-two and explains that the feedback output toggles once per input-clock cycle; the detailed inverter path is secondary.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 2223,
        "total_tokens": 3513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 2223,
        "total_tokens": 3513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2070,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows three inverters in a feedback loop, with two switches driven by complementary clock signals. Assuming a switch closes when its labeled control is high, the switches alternate:\n\n- **\\(CK=1\\):** The left switch closes and the right opens. The first inverter prepares the complement of the current output.\n- **\\(CK=0\\):** The left switch opens and the right closes. That complement passes through the other two inverters, so the output changes state.\n\nThus, if the disconnected nodes retain their values, the output toggles once per clock cycle: it acts as a **dynamic divide-by-two circuit** (\\(f_{\\text{out}}=f_{CK}/2\\)). The two switches are not closed simultaneously, so this is not a continuously oscillating three-inverter ring. Its operation depends on stored charge at the disconnected inputs and appropriate clock timing.",
        "format": "markdown",
        "sha256": "a4f4993eb48657a767beff3ee121ce221e1cdb9631091537a46b40c8ea3a739e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic-latch divide-by-two circuit and explains that alternating clock phases produce an output at half the clock frequency. The internal inverter-path details are secondary.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 2774,
        "total_tokens": 4064,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1287,
        "input_tokens": 1290,
        "output_tokens": 2774,
        "total_tokens": 4064,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter bypasses the \\(CK\\)-controlled switch and drives the same node as Inv₁. When \\(\\overline{CK}\\) closes, the two downstream inverters feed that node back to the red inverter, creating an odd-inverter loop with no stable logic state. It can therefore cause oscillation or contention with Inv₁, increasing power and disrupting the intended clocked behavior—not simply improving speed.",
        "format": "markdown",
        "sha256": "dce4d39b2900db553254af6a07331e295e7cb8c27b993779e0e8a77ea6ea47d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the bypass path and the odd-inverter loop that can cause oscillation or contention. But it omits the high-speed benefit and the key low-frequency consequence: the unclocked branch raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 4234,
        "total_tokens": 5393,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1159,
        "output_tokens": 4234,
        "total_tokens": 5393,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter bypasses the \\(CK\\)-controlled switch and first inverter. When the \\(\\overline{CK}\\) switch closes, that bypass creates an odd-inverter feedback loop, which can race or oscillate instead of following the intended clocked behavior.\n\nIt is not a simple speed boost: opening the first switch leaves the black inverter’s **output** connected, so it can fight the red inverter. That contention can increase power consumption and make the output and timing unreliable.",
        "format": "markdown",
        "sha256": "4f6fed0c6796ce46c593232743a339c3ec1d02bdf6a3e6b2a21b1b477f535b96"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the bypass and the odd-inversion loop, including contention, but misses the high-speed benefit and the key low-frequency consequence: the unclocked branch raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 7197,
        "total_tokens": 8356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 7197,
        "total_tokens": 8356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter bypasses the \\(CK\\)-controlled switch and \\(Inv_1\\). When the \\(\\overline{CK}\\) switch closes, it creates a three-inverter feedback loop that can race or oscillate instead of following the intended clocked behavior.\n\nIt is **not a reliable speed improvement**: \\(Inv_1\\) can still drive the same node while its input switch is open, so the two inverters may fight each other, increasing power consumption and making timing unpredictable.",
        "format": "markdown",
        "sha256": "f6aa75e37aacc0420cb8873660ae4fb1e2b8467a26efdcce39b53461a3ae36c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the bypass path and the three-inverter loop, but misses the key tradeoff: the path improves high-speed operation while raising the minimum usable clock frequency. Calling it not a reliable speed improvement misstates the central result.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 4768,
        "total_tokens": 5927,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1156,
        "input_tokens": 1159,
        "output_tokens": 4768,
        "total_tokens": 5927,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The red inverter is **in parallel with `Inv1`**, not cross-coupled with it: when the `CK` switch is closed, both take the left-hand node as input and drive the node after `Inv1`. It does not hold either floating input.\n\nWorse, when the \\(\\overline{CK}\\) switch is closed, the two inverters on the right make the left-hand node equal to the node after `Inv1` (after propagation delay). The red inverter tries to make those same nodes *opposites*. It therefore creates an odd-inverter feedback loop and can fight `Inv1` during the phase in which the circuit should toggle.\n\nSo its actual effect is an always-on bypass around the `CK` switch and `Inv1`—one that disrupts the intended operation. It is **not a keeper** and does not remove the leakage-related minimum clock frequency requirement.",
        "format": "markdown",
        "sha256": "7629a064034e7317ab74100e4218d5a9deb336fb0a79d93151664c8d2a808e3b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the feedforward bypass and odd-inversion feedback loop. It misses the key frequency-dependent tradeoff—speedup at high clock rates but corruption and a higher minimum usable rate at low rates—and frames the minimum-frequency issue as leakage-related.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 3300,
        "total_tokens": 4504,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1204,
        "output_tokens": 3300,
        "total_tokens": 4504,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The red inverter and `Inv1` **drive the same node**; they are not cross-coupled. The red inverter is an always-on path that bypasses the `CK` switch.\n\nLet \\(Q\\) be the rightmost output and \\(X\\) the node driven by `Inv1` and the red inverter. When the \\(\\overline{CK}\\) switch closes, the two right-hand inverters make \\(Q=X\\), while the red inverter demands \\(X=\\neg Q\\). Those conditions cannot both hold. The resulting odd-inverter feedback path can oscillate, and the red inverter can contend with `Inv1`.\n\nSo, as drawn, the red inverter does **not** act as a keeper or remove the leakage-related minimum clock frequency. It disrupts the intended dynamic divider; the switch-isolated storage nodes are still dynamic.",
        "format": "markdown",
        "sha256": "c9984522817cc84d801b93f75c43dd0552905517c70a7655defdceb170d560ba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the always-on feedforward path bypassing the CK switch. However, it omits the key tradeoff: the path can help at high speed but overpower the intended latch at low rates, raising the minimum usable clock frequency; it frames the issue mainly as leakage instead.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 4976,
        "total_tokens": 6180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4792,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 4976,
        "total_tokens": 6180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4792,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. Let \\(A\\) be the bottom feedback node and \\(B\\) the output of `Inv1`. Both `Inv1` and the red inverter point **from \\(A\\) to \\(B\\)**. They are not cross-coupled: the red inverter bypasses the `CK` switch and drives \\(B\\) continuously.\n\nWhen `CK` is low, the other switch is closed, creating the path \\(A \\rightarrow\\) red inverter \\(\\rightarrow B \\rightarrow\\) the two right-hand inverters \\(\\rightarrow A\\). That is an odd-inverter feedback loop, which can oscillate. `Inv1` still drives \\(B\\) from its now-floating input, so it may also contend with the red inverter.\n\nWhen `CK` is high, the input of the next inverter remains floating. The red inverter therefore does **not** eliminate the leakage-related minimum clock frequency; it is a clock-switch bypass, not a keeper.",
        "format": "markdown",
        "sha256": "9866bbb8a81cc81497b307a63ce0d41a1bbe95f92ff1a38a1187a5a5d346b5e7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter as a continuous feedforward path bypassing the CK switch; it also notes the regenerative loop and contention. However, it misses the key low-frequency tradeoff—this unclocked branch can overpower the intended latch behavior and raise the minimum usable clock rate—and instead attributes the remaining minimum to leakage.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 5238,
        "total_tokens": 6442,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5033,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1201,
        "input_tokens": 1204,
        "output_tokens": 5238,
        "total_tokens": 6442,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5033,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat this as a **constrained noise optimization**, not as a choice of a 50-Ω feedback resistor. With \\(C_1\\) effectively short at the operating frequency, let \\(g_m=g_{m1}+g_{m2}\\) and \\(R_o=r_{o1}\\parallel r_{o2}\\parallel R_L\\). Neglecting capacitances,\n\n\\[\nR_{\\rm in}=\\frac{R_F+R_o}{1+g_mR_o}.\n\\]\n\nThus, for each transistor size and bias choice, maintain the match by setting\n\n\\[\nR_F=50\\,\\Omega(1+g_mR_o)-R_o.\n\\]\n\nBias both transistors for high *noise-efficient* \\(g_m\\), then adjust \\(R_F\\) to preserve 50 Ω. Higher \\(g_m\\) reduces input-referred transistor noise; a larger \\(R_F\\) reduces its thermal **current** noise. Check the result at the operating frequency, where gate capacitances, \\(C_1\\), power, and bandwidth can change the optimum.\n\nThere is an important limit: if \\(R_o\\gg R_F\\), then \\(R_{\\rm in}\\approx1/g_m\\). Matching essentially fixes \\(g_m\\) at **20 mS**, so increasing \\(R_F\\) can reduce feedback-resistor noise but cannot remove the transistor-noise floor. A numerical optimum needs the device noise models, output load, and operating frequency.",
        "format": "markdown",
        "sha256": "8d125cdd19bcd57aa415b16ef565688197ea1093c0fa1209f253a8a8057586ce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The finite-output-resistance match relation is correct, and the answer recommends increasing gm while retuning RF to keep Rin at 50 Ω, which lowers transistor noise. The Ro ≫ RF observation is a conditional limiting case and does not negate that optimization.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 18440,
        "total_tokens": 20907,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2467,
        "output_tokens": 18440,
        "total_tokens": 20907,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "At the design frequency, assume \\(C_1\\) is effectively a short. Let \\(g_m=g_{m1}+g_{m2}\\) and let \\(R_o\\) be the effective output resistance, including the load. For this feedback inverter,\n\n\\[\nR_{\\rm in}\\simeq\\frac{R_F+R_o}{1+g_mR_o}.\n\\]\n\nThus, whenever you change transistor size or bias, **retune the feedback resistor** to preserve the 50-Ω match:\n\n\\[\nR_F=50(1+g_mR_o)-R_o.\n\\]\n\nFor low NF, increase the *combined* transconductance of M1 and M2 efficiently, and preserve enough output gain that the matching condition allows a large \\(R_F\\). Higher \\(g_m\\) reduces input-referred MOS noise; a larger \\(R_F\\) reduces feedback-resistor noise. Simply increasing \\(R_F\\) without increasing gain will spoil the match.\n\nThere is no unique optimum from the schematic alone. At the operating frequency, optimize bias and sizing while checking NF **and** the complex input match, including gate capacitances, \\(C_1\\), output loading, power, and stability.",
        "format": "markdown",
        "sha256": "5b60cedbe1c7c29c8e7c4f184fbcb87d49eed9059b5df0e31312969a264b9de0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Uses the finite-output-resistance input-match relation, retunes RF to keep Rin at 50 Ω, and recommends increasing gm while maintaining the match. This captures the correct path to lower NF; the full-credit rule accepts this recommendation without requiring an explicit statement of the 1 + gamma bound.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 17939,
        "total_tokens": 20406,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 17939,
        "total_tokens": 20406,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat the 50‑Ω input match and noise figure as a **joint design constraint**. Let \\(g_m=g_{m1}+g_{m2}\\), and let \\(R_o\\) be the inverter’s output resistance, excluding \\(R_F\\). Neglecting capacitances at the design frequency,\n\n\\[\nR_{\\rm in}=\\frac{R_F+R_o}{1+g_mR_o}.\n\\]\n\nThus, each time you change the transistor sizes or bias, restore the match with\n\n\\[\nR_F=50(1+g_mR_o)-R_o.\n\\]\n\nIn a high-gain approximation, the linear noise factor follows\n\n\\[\nF\\approx 1+\n\\frac{\\gamma_1g_{m1}+\\gamma_2g_{m2}}{50(g_{m1}+g_{m2})^2}\n+\\frac{50}{R_F}.\n\\]\n\nSo the direction is to obtain more **total transconductance per unit power** from both transistors, while retaining enough voltage gain to use a larger, less noisy \\(R_F\\). Increasing \\(R_F\\) *alone* spoils the 50‑Ω match. There is no unique numerical optimum from the schematic: output loading, power, operating frequency, and the losses and parasitics of \\(C_1\\) and the MOSFETs must be included in the final NF and input-match simulation.",
        "format": "markdown",
        "sha256": "ee480d8ebace1f1cb9954fdd80204e29de46f273bae4feb5d1d912aeeada5364"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly includes finite output resistance in the input-match relation and shows how to adjust RF as gm increases. Its noise expression and recommendation capture the key result: increasing gm while maintaining Rin can reduce NF.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 18829,
        "total_tokens": 21296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18526,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2467,
        "output_tokens": 18829,
        "total_tokens": 21296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18526,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming ideal MOS gates and current source, negligible transistor output resistance, and AC-grounded \\(V_{DD}\\) and \\(V_b\\), define\n\\[\ng_{\\rm eq}=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}.\n\\]\nThe unloaded gain from the input node \\(P\\) to \\(V_{\\rm out}\\) is \\(-A\\), where\n\\[\nA=g_{m1}R_{D1}\\,g_{\\rm eq}R_{D2}.\n\\]\n\nThe feedback path sees the output resistance \\(R_{D2}\\) in series with \\(R_F\\). Including the shunt input capacitor, the **input impedance** is therefore\n\\[\n\\boxed{\\displaystyle\nZ_{\\rm in}(s)=\n\\left(sC_{\\rm in}+\\frac{1+A}{R_F+R_{D2}}\\right)^{-1}.}\n\\]\n\nAt low frequency, \\(R_{\\rm in}=(R_F+R_{D2})/(1+A)\\). If \\(M_2\\) and \\(M_3\\) are matched, use \\(g_{\\rm eq}=g_m/2\\).",
        "format": "markdown",
        "sha256": "70bb9d6e64afe372520ebb90781b7b2d611f89435807dcf61998851b39c0a8e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact Miller-theorem result, including the output-side resistance: \\(R_{in}=(R_F+R_{D2})/(1+A)\\), and defines an unloaded gain. The input-capacitance extension is optional and does not conflict with the stated low-frequency result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 4700,
        "total_tokens": 4910,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4439,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 4700,
        "total_tokens": 4910,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4439,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming an ideal tail current source, negligible MOS output conductances, and ac-grounded \\(V_{DD}\\) and \\(V_b\\), let\n\\[\ng_{\\rm eq}=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}.\n\\]\nA voltage \\(v_P\\) at the input produces \\(v_X=-g_{m1}R_{D1}v_P\\). The differential pair then supplies a small-signal output current \\(g_{\\rm eq}v_X\\). Applying KCL at \\(V_{\\rm out}\\) and \\(P\\) gives\n\\[\n\\boxed{\\displaystyle\nZ_{\\rm in}(s)=\n\\left[\nsC_{\\rm in}+\n\\frac{1+g_{m1}R_{D1}g_{\\rm eq}R_{D2}}\n     {R_F+R_{D2}}\n\\right]^{-1}.}\n\\]\n\nThus the low-frequency input resistance, excluding \\(C_{\\rm in}\\), is\n\\[\nR_{\\rm in}=\n\\frac{R_F+R_{D2}}\n{1+g_{m1}R_{D1}g_{\\rm eq}R_{D2}}.\n\\]\nFor matched \\(M_2\\) and \\(M_3\\), \\(g_{\\rm eq}=g_m/2\\).",
        "format": "markdown",
        "sha256": "cc8f846908c3a068d4408262f4d4ca9882f7a33eeb8425c69a1e864fcf4531b4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The low-frequency result matches the exact Miller-theorem expression, with the gain factor equivalent to the golden solution for the matched differential pair. The added input-capacitance term is optional and does not alter the required resistive result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 6512,
        "total_tokens": 6722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 6512,
        "total_tokens": 6722,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming an ideal \\(I_{SS}\\) source and neglecting MOS output resistance, the \\(M_2\\)–\\(M_3\\) pair has an effective transconductance\n\\[\ng_{m,23}=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}.\n\\]\nSince \\(v_X=-g_{m1}R_{D1}v_P\\), solving the output-node equation and including the feedback resistor gives the **input resistance looking into \\(P\\), excluding \\(C_{\\rm in}\\)**:\n\\[\n\\boxed{R_{\\rm in}=\n\\frac{R_F+R_{D2}}\n{1+g_{m1}R_{D1}g_{m,23}R_{D2}}.}\n\\]\n\nThus the impedance seen by \\(I_{\\rm in}\\), including \\(C_{\\rm in}\\), is\n\\[\n\\boxed{Z_{\\rm in}(j\\omega)=\n\\left(\\frac{1}{R_{\\rm in}}+j\\omega C_{\\rm in}\\right)^{-1}.}\n\\]\n\nFor matched \\(M_2\\) and \\(M_3\\), \\(g_{m,23}=g_{m2}/2\\). If also \\(R_F\\gg R_{D2}\\), then \\(R_{\\rm in}\\approx R_F/[1+\\tfrac12 g_{m1}g_{m2}R_{D1}R_{D2}]\\).",
        "format": "markdown",
        "sha256": "9308b20ac21cecb77680b99aca55dd1792337ab450b1580098276bee305d885d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer gives the exact Miller-theorem result, including RD2 in the numerator. Its effective transconductance reduces to gm2,3/2 for a matched M2–M3 pair, matching the golden unloaded-gain expression; the added input-capacitance relation is consistent.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 8835,
        "total_tokens": 9045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8508,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 210,
        "output_tokens": 8835,
        "total_tokens": 9045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8508,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(S_{\\rm th}(\\Delta f)\\) is the LDO’s **one-sided output-voltage noise PSD** in \\(\\mathrm{V^2/Hz}\\). To find its phase-noise contribution, you need the VCO’s supply sensitivity—not just the noise spectrum.\n\nFor low-frequency supply fluctuations, let \\(K_{\\rm push}=\\partial f_0/\\partial V_{\\rm supply}\\) in \\(\\mathrm{Hz/V}\\), and let \\(H_s(\\Delta f)\\) describe how LDO output noise reaches the VCO. Frequency fluctuations integrate into phase fluctuations, giving\n\n\\[\nS_{\\phi,\\rm LDO}(\\Delta f)\n=\\left|\\frac{K_{\\rm push}H_s(\\Delta f)}{\\Delta f}\\right|^2\nS_{\\rm th}(\\Delta f),\n\\qquad\n\\mathcal L_{\\rm LDO}(\\Delta f)\n=10\\log_{10}\\!\\left[\\frac{S_{\\phi,\\rm LDO}(\\Delta f)}{2}\\right]\n\\ \\mathrm{dBc/Hz}.\n\\]\n\nThis frequency-pushing formula is an approximation. For the full circuit, determine the **supply-to-phase transfer** by oscillator periodic-noise simulation; it captures coupling through the inductors, common-mode rejection, and AM-to-PM conversion. The schematic and \\(S_{\\rm th}\\) alone do not determine a numerical phase noise.",
        "format": "markdown",
        "sha256": "ee9a039b5d5a135fd4d81c403ff2336a77901cce93f92ed0c3cff7fa7c53b2e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly uses supply pushing and the FM-to-PM conversion with the expected 1/Δf² dependence. It omits the circuit-specific insight that supply noise acts directly on the varactors, making Kpush closely related to KVCO and lower KVCO beneficial.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 5649,
        "total_tokens": 9043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3394,
        "output_tokens": 5649,
        "total_tokens": 9043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(S_{\\rm th}(f)\\) is the LDO’s **voltage-noise PSD at \\(V_{\\rm out}\\)** in \\(\\mathrm{V^2/Hz}\\). The missing quantity is the VCO’s *supply-pushing sensitivity* \\(K_{\\rm sup}=\\partial f_{\\rm osc}/\\partial V_{\\rm out}\\), in Hz/V, with \\(V_{\\rm cont}\\) fixed.\n\nAt offsets where supply noise acts as frequency modulation, phase is the integral of the frequency fluctuation. Thus the LDO contribution to single-sideband phase noise is\n\n\\[\n\\boxed{\\mathcal L_{\\rm LDO}(f)\\simeq\n\\frac{S_{\\rm th}(f)}{2}\n\\left|\\frac{K_{\\rm sup}(f)}{f}\\right|^2}\n\\]\n\nin linear units; use \\(10\\log_{10}\\mathcal L_{\\rm LDO}\\) for dBc/Hz. At low offsets, \\(K_{\\rm sup}(f)\\) can often be approximated by a DC sweep of oscillation frequency versus \\(V_{\\rm out}\\).\n\n**\\(S_{\\rm th}\\) and the schematic alone are not enough for a numerical result.** The noise drives both tank branches in common mode, so direct coupling may largely cancel, while varactor and transistor nonlinearities can still convert it to phase noise. For a wideband thermal-noise calculation, use the full supply-to-phase transfer from periodic-noise simulation, including noise folding.",
        "format": "markdown",
        "sha256": "0f5f6a1d60aabc0a586e9c7be0493ac56eeeedff6820f3f6e1d8099dbc64f3cc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly uses supply-pushing sensitivity and the FM-to-phase conversion, giving the expected Sth·Ksup²/(2f²) dependence. It omits the key design insight that supply perturbation acts directly on the varactors, making Kpush closely related to KVCO, and its common-mode-cancellation caveat is potentially misleading.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 9529,
        "total_tokens": 12923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 9529,
        "total_tokens": 12923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO noise spectrum alone is not enough; you also need the VCO’s **supply-to-phase sensitivity**. For a close-in estimate, model rail noise as frequency modulation and determine the supply-pushing coefficient \\(K_{\\rm push}=\\partial f_{\\rm osc}/\\partial V_{\\rm out}\\) in Hz/V. If \\(S_{\\rm th}(\\Delta f)\\) is the one-sided voltage-noise PSD at \\(V_{\\rm out}\\), then\n\n\\[\nS_{\\phi,\\rm LDO}(\\Delta f)\n\\simeq\n\\frac{K_{\\rm push}^{2}}{(\\Delta f)^2}S_{\\rm th}(\\Delta f),\n\\qquad\n\\mathcal L_{\\rm LDO}(\\Delta f)\n\\simeq \\frac{1}{2}S_{\\phi,\\rm LDO}(\\Delta f),\n\\]\n\nwhere \\(\\mathcal L\\) is the single-sideband phase noise in linear units; take \\(10\\log_{10}\\mathcal L\\) for dBc/Hz. Thus white rail noise gives an approximately \\(1/(\\Delta f)^2\\) close-in contribution.\n\nMeasure or simulate \\(K_{\\rm push}\\) at the operating point. For greater accuracy, include filtering through the supply network and noise conversion in the oscillating circuit (for example, with PSS/PNoise). The figure and \\(S_{\\rm th}\\) alone cannot give a numerical phase-noise result.",
        "format": "markdown",
        "sha256": "9547baab648f581523b5fd9a4c2cb190ff291c2b4b66524553cab3ee2703b727"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly uses supply pushing and FM-to-PM conversion, with the expected 1/Δf² dependence and equivalent single-sideband factor. It omits the circuit-specific insight that supply noise acts directly on the varactors, making Kpush closely related to KVCO and lower KVCO beneficial.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 6008,
        "total_tokens": 9402,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3391,
        "input_tokens": 3394,
        "output_tokens": 6008,
        "total_tokens": 9402,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "A sufficiently large \\(C_T\\) **usually reduces the tail current source’s contribution to phase noise**. It bypasses noise at the tail node, particularly near \\(2f_0\\), that would otherwise be mixed into noise near the oscillation frequency.\n\nThat does **not** guarantee lower *total* phase noise: \\(C_T\\) also changes the transistors’ current waveform, and it does not bypass low-frequency noise. The net effect depends on the capacitor value and which noise source dominates.",
        "format": "markdown",
        "sha256": "d1b718f8b963045bf77bea15c8a517d0f10aa88a6b719398ad220f60cb357172"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It mainly presents CT as filtering tail-node noise and reducing its phase-noise contribution. It does not identify the nonmonotonic behavior or the class-C improvement and specific degradation mechanisms required for higher credit.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 10985,
        "total_tokens": 14552,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3567,
        "output_tokens": 10985,
        "total_tokens": 14552,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) **usually reduces phase noise**. It gives the tail node a low-impedance path at the second harmonic (\\(2f_0\\)), so less tail-current noise and ripple are converted into phase fluctuations by the cross-coupled pair.\n\nThe improvement is not guaranteed at every offset: \\(C_T\\) also changes the transistors’ current waveform, and the result depends on its value, the bias, and which noise source dominates.",
        "format": "markdown",
        "sha256": "8c2c72d98ed3e97e820d6ba35d9cb0bbce38f908738427cd1a05090c9f913768"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer presents tail-node filtering as usually improving phase noise and does not identify the nonmonotonic class-C benefit or any specific degradation mechanism; a generic caveat about dependence on CT and bias is insufficient.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 6834,
        "total_tokens": 10401,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 6834,
        "total_tokens": 10401,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding \\(C_T\\) **usually lowers phase noise**. The tail node has a strong component at \\(2f_0\\); the capacitor gives tail-current-source noise at that frequency a path to ground, reducing the noise that the switching transistors convert into noise near \\(f_0\\). In a balanced oscillator it adds little loading to the differential tank at \\(f_0\\).\n\nThe improvement depends on \\(C_T\\), bias, and which noise source dominates. It does not directly filter low-frequency flicker noise.",
        "format": "markdown",
        "sha256": "15ac5165a6548150c66599f65dce18f865023b6583a2ad0cfcf5fc54a5ca58c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives a generally monotonic phase-noise improvement from filtering tail-node noise and misses the nonmonotonic effects and class-C mechanism.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 9436,
        "total_tokens": 13003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3564,
        "input_tokens": 3567,
        "output_tokens": 9436,
        "total_tokens": 13003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9322,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a coupled LC oscillator, so its frequency is approximately the resonance of each tank:\n\n\\[\nf_{\\mathrm{osc}}\\approx \\frac{1}{2\\pi\\sqrt{L\\,C_{\\mathrm{eff}}}},\n\\]\n\nwhere \\(L\\) is an output inductor and \\(C_{\\mathrm{eff}}\\) includes transistor and wiring capacitance. Coupling can shift the frequency somewhat. Because the figure gives neither \\(L\\) nor \\(C_{\\mathrm{eff}}\\), a numerical estimate isn’t possible.",
        "format": "markdown",
        "sha256": "abc03fc957b8e8fb76d6747726282fcea887955e82af55375a892753d5c94f75"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the uncoupled tank resonance and notes that coupling shifts it, but omits the essential estimate for that shift, such as Δω ≈ αω₀/(2Q).",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 3474,
        "total_tokens": 5275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1801,
        "output_tokens": 3474,
        "total_tokens": 5275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit contains two coupled LC oscillators. For matched tanks, the oscillation frequency is approximately\n\n\\[\nf_{\\rm osc}\\approx \\frac{1}{2\\pi\\sqrt{L\\,C_{\\rm eff}}},\n\\]\n\nwhere \\(L\\) is an output inductor and \\(C_{\\rm eff}\\) is the total capacitance at that output node, including transistor and wiring parasitics. The coupling and bias currents can shift the frequency somewhat, but the figure gives neither \\(L\\) nor \\(C_{\\rm eff}\\), so a numerical estimate is not possible.",
        "format": "markdown",
        "sha256": "efe16eea1a877b16e7e3cc0922f31d6ad4b022155ff446ffc89269b868406814"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct uncoupled tank-resonance estimate and acknowledges coupling can shift the frequency, but omits the key estimate for that shift (approximately αω₀/(2Q) or an equivalent form), which is central to the answer.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 1160,
        "total_tokens": 2961,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 1160,
        "total_tokens": 2961,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "openai/gpt-6-sol",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two cross-coupled stages form a quadrature LC oscillator. Its frequency is approximately the resonance frequency of either tank:\n\n\\[\nf_{\\mathrm{osc}}\\approx \\frac{1}{2\\pi\\sqrt{L\\,C_{\\mathrm{eff}}}},\n\\]\n\nwhere \\(L\\) is one tank inductor and \\(C_{\\mathrm{eff}}\\) is the effective capacitance at its output node, including transistor and wiring parasitics. The coupling mainly sets the relative phase of the two stages, though it can shift the frequency somewhat.\n\nA numerical estimate isn’t possible from the figure alone: neither the inductance nor the effective capacitance is specified.",
        "format": "markdown",
        "sha256": "be8e913b058b3f99191c0ea5543c20a88c4a1ad3fb25576a4a204fc9e0df7e8d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct tank-resonance baseline and acknowledges a coupling-induced shift, but does not estimate that shift in terms of coupling strength and Q (or an equivalent expression), which is central to the requested oscillator-frequency estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 2730,
        "total_tokens": 4531,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1798,
        "input_tokens": 1801,
        "output_tokens": 2730,
        "total_tokens": 4531,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2588,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
