{
  "model_key": "grok_45",
  "display_name": "Grok 4.5",
  "provider": "xai",
  "evaluation_model_ids": [],
  "thinking_effort": "high",
  "configuration_note": "Grok 4.5 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (x-ai/grok-4.5) at reasoning effort high, the highest it offers. Requests set temperature to 0 and max_tokens to 450,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Grok 4.5 on 2026-11-10 ($2.00 input, $0.30 cached input, $6.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 90,
          "incorrect_count": 60,
          "partial_credit_count": 43,
          "zero_count": 17,
          "mean_score_0_to_4": 2.98,
          "score_percent": 74.5,
          "score_distribution": {
            "0": 17,
            "1": 15,
            "2": 12,
            "3": 16,
            "4": 90
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 90,
          "incorrect_count": 60,
          "partial_credit_count": 43,
          "zero_count": 17,
          "mean_score_0_to_4": 2.98,
          "score_percent": 74.5,
          "score_distribution": {
            "0": 17,
            "1": 15,
            "2": 12,
            "3": 16,
            "4": 90
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 69,
          "incorrect_count": 21,
          "partial_credit_count": 9,
          "zero_count": 12,
          "mean_score_0_to_4": 3.3,
          "score_percent": 82.5,
          "score_distribution": {
            "0": 12,
            "1": 1,
            "2": 4,
            "3": 4,
            "4": 69
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 69,
          "incorrect_count": 21,
          "partial_credit_count": 9,
          "zero_count": 12,
          "mean_score_0_to_4": 3.3,
          "score_percent": 82.5,
          "score_distribution": {
            "0": 12,
            "1": 1,
            "2": 4,
            "3": 4,
            "4": 69
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 21,
          "incorrect_count": 39,
          "partial_credit_count": 34,
          "zero_count": 5,
          "mean_score_0_to_4": 2.5,
          "score_percent": 62.5,
          "score_distribution": {
            "0": 5,
            "1": 14,
            "2": 8,
            "3": 12,
            "4": 21
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 21,
          "incorrect_count": 39,
          "partial_credit_count": 34,
          "zero_count": 5,
          "mean_score_0_to_4": 2.5,
          "score_percent": 62.5,
          "score_distribution": {
            "0": 5,
            "1": 14,
            "2": 8,
            "3": 12,
            "4": 21
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 30,
        "incorrect_count": 20,
        "partial_credit_count": 14,
        "zero_count": 6,
        "mean_score_0_to_4": 2.98,
        "score_percent": 74.5,
        "score_distribution": {
          "0": 6,
          "1": 5,
          "2": 3,
          "3": 6,
          "4": 30
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 30,
        "incorrect_count": 20,
        "partial_credit_count": 16,
        "zero_count": 4,
        "mean_score_0_to_4": 3.04,
        "score_percent": 76.0,
        "score_distribution": {
          "0": 4,
          "1": 5,
          "2": 6,
          "3": 5,
          "4": 30
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 30,
        "incorrect_count": 20,
        "partial_credit_count": 13,
        "zero_count": 7,
        "mean_score_0_to_4": 2.92,
        "score_percent": 73.0,
        "score_distribution": {
          "0": 7,
          "1": 5,
          "2": 3,
          "3": 5,
          "4": 30
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 62720,
        "input_tokens": 244422,
        "output_tokens": 694499,
        "total_tokens": 938921
      },
      "known_totals": {
        "cached_input_tokens": 62720,
        "input_tokens": 244422,
        "output_tokens": 694499,
        "total_tokens": 938921
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 22,
          "incorrect_count": 8,
          "partial_credit_count": 3,
          "zero_count": 5,
          "mean_score_0_to_4": 3.1666666666666665,
          "score_percent": 79.16666666666666,
          "score_distribution": {
            "0": 5,
            "1": 1,
            "3": 2,
            "4": 22
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 24,
          "incorrect_count": 6,
          "partial_credit_count": 3,
          "zero_count": 3,
          "mean_score_0_to_4": 3.4,
          "score_percent": 85.0,
          "score_distribution": {
            "0": 3,
            "2": 3,
            "4": 24
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 23,
          "incorrect_count": 7,
          "partial_credit_count": 3,
          "zero_count": 4,
          "mean_score_0_to_4": 3.3333333333333335,
          "score_percent": 83.33333333333334,
          "score_distribution": {
            "0": 4,
            "2": 1,
            "3": 2,
            "4": 23
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 8,
          "incorrect_count": 12,
          "partial_credit_count": 11,
          "zero_count": 1,
          "mean_score_0_to_4": 2.7,
          "score_percent": 67.5,
          "score_distribution": {
            "0": 1,
            "1": 4,
            "2": 3,
            "3": 4,
            "4": 8
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 6,
          "incorrect_count": 14,
          "partial_credit_count": 13,
          "zero_count": 1,
          "mean_score_0_to_4": 2.5,
          "score_percent": 62.5,
          "score_distribution": {
            "0": 1,
            "1": 5,
            "2": 3,
            "3": 5,
            "4": 6
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 7,
          "incorrect_count": 13,
          "partial_credit_count": 10,
          "zero_count": 3,
          "mean_score_0_to_4": 2.3,
          "score_percent": 57.49999999999999,
          "score_distribution": {
            "0": 3,
            "1": 5,
            "2": 2,
            "3": 3,
            "4": 7
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is defined as \\(g_m r_o\\).\n\nIn saturation,\n\\[\nI_D=\\frac12\\mu C_\\mathrm{ox}\\frac{W}{L}V_\\mathrm{ov}^2,\n\\]\n\\[\ng_m=\\mu C_\\mathrm{ox}\\frac{W}{L}V_\\mathrm{ov}=\\frac{2I_D}{V_\\mathrm{ov}},\n\\]\nand the output resistance is\n\\[\nr_o=\\frac{1}{\\lambda I_D}\\propto\\frac{L}{I_D}\n\\]\n(because the channel-length modulation factor satisfies \\(\\lambda\\propto1/L\\)).\n\nConsequently\n\\[\ng_mr_o\\propto\\frac{L}{V_\\mathrm{ov}}.\n\\]\n\nDoubling both \\(W\\) and \\(L\\) leaves the ratio \\(W/L\\) unchanged.  With the terminal voltages held constant the overdrive \\(V_\\mathrm{ov}\\) (and therefore \\(I_D\\)) also stays the same, while \\(L\\) doubles.  The product \\(g_mr_o\\) therefore doubles.\n\nFinal answer: doubles",
        "format": "markdown",
        "sha256": "f5c1e83035013c00ecd126c50a5667d0001725ba31a81fd68061f3192dbc91e6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions preserves W/L and, at fixed overdrive, keeps gm and drain current approximately unchanged while ro doubles, so intrinsic gain doubles.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 224,
        "output_tokens": 1882,
        "total_tokens": 2106,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 224,
        "output_tokens": 1882,
        "total_tokens": 2106,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is \\(g_m r_o\\).\n\nWith both \\(W\\) and \\(L\\) doubled, the ratio \\(W/L\\) is unchanged. For fixed gate overdrive \\(V_{ov}\\) (equivalently, fixed \\(V_{GS}\\) or fixed \\(I_D\\)), it follows that \\(g_m\\) is unchanged.\n\nThe Early voltage scales proportionally with \\(L\\), so \\(r_o\\) doubles. Therefore the intrinsic gain \\(g_m r_o\\) doubles.\n\n(This can also be seen from the expression \\(g_m r_o = 2V_A'/V_{ov}\\), which is directly proportional to \\(L\\).)\n\nFinal answer: doubles",
        "format": "markdown",
        "sha256": "2612a089aeaf002f441c74aea6b9a571d0e42cb7465997d4b4a7ee649b7cd8c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling both dimensions leaves gm approximately unchanged while increasing ro approximately twofold, so intrinsic gain doubles. The added bias-condition phrasing is consistent with the stated ideal scaling.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 224,
        "output_tokens": 1124,
        "total_tokens": 1348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 971,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 224,
        "output_tokens": 1124,
        "total_tokens": 1348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 971,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is \\(g_m r_o\\).\n\nAssume square-law operation in saturation with the device biased at the same overdrive voltage \\(V_\\mathrm{ov}\\) (i.e., the same \\(V_{GS}\\)) before and after the geometry change. Doubling both \\(W\\) and \\(L\\) leaves the ratio \\(W/L\\) unchanged, so the drain current\n\\[\nI_D=\\frac12\\mu C_\\mathrm{ox}\\frac{W}{L}V_\\mathrm{ov}^2\n\\]\nis likewise unchanged. Consequently the transconductance\n\\[\ng_m=\\mu C_\\mathrm{ox}\\frac{W}{L}V_\\mathrm{ov}=\\frac{2I_D}{V_\\mathrm{ov}}\n\\]\nremains exactly the same.\n\nThe output resistance is set by channel-length modulation:\n\\[\nr_o=\\frac{1}{\\lambda I_D},\\qquad\\lambda\\propto\\frac1L.\n\\]\nDoubling \\(L\\) therefore halves \\(\\lambda\\). With \\(I_D\\) held constant, \\(r_o\\) doubles.\n\nThe intrinsic gain \\(g_m r_o\\) consequently doubles.\n\nFinal answer: doubles",
        "format": "markdown",
        "sha256": "6e03b399819ac9a76995827aa18bfc1358befb735fe5281a15badf62aa4828b0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that at fixed overdrive, doubling both dimensions leaves W/L, drain current, and gm approximately unchanged, while the longer channel increases ro, so intrinsic gain approximately doubles. The square-law assumptions support the conclusion.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 224,
        "output_tokens": 1411,
        "total_tokens": 1635,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1152,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 224,
        "output_tokens": 1411,
        "total_tokens": 1635,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1152,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The drain current of a MOSFET in saturation is given by\n\\[\nI_D=\\frac12\\mu C_\\mathrm{ox}\\frac WL(V_{GS}-V_t)^2=\\frac12\\mu C_\\mathrm{ox}\\frac WL V_\\mathrm{ov}^2.\n\\]\nTransconductance is the derivative\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}=\\mu C_\\mathrm{ox}\\frac WL V_\\mathrm{ov}.\n\\]\nHence \\(g_m\\) rises linearly with overdrive when device geometry is held fixed. (The same conclusion follows from the alternate expression \\(g_m=\\sqrt{2\\mu C_\\mathrm{ox}(W/L)I_D}\\), because \\(I_D\\) itself grows with \\(V_\\mathrm{ov}^2\\).)\n\nThe relation \\(g_m=2I_D/V_\\mathrm{ov}\\) appears to suggest the opposite dependence, but only when \\(I_D\\) is artificially held constant (i.e., when \\(W/L\\) is changed at the same time as \\(V_\\mathrm{ov}\\)). For any given MOSFET the first two expressions apply directly, so Student A is correct.\n\nFinal answer: A",
        "format": "markdown",
        "sha256": "bb98b2c96fb8b0a3effbf289a9e25e616538ca5bd0305bf9625b1cf8dc107b0d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that for fixed device geometry, increasing overdrive increases drain current quadratically and transconductance linearly, so Student A is correct. It also correctly qualifies Student B's result as applying when drain current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 236,
        "output_tokens": 1167,
        "total_tokens": 1403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 905,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 236,
        "output_tokens": 1167,
        "total_tokens": 1403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 905,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The drain current of a MOSFET in saturation obeys\n\\[\nI_D=\\frac12\\mu C_\\text{ox}\\frac{W}{L}V_\\text{ov}^2,\n\\]\nwhere the over-drive is defined by \\(V_\\text{ov}=V_{GS}-V_{th}\\).  \nTransconductance is the derivative\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}=\\mu C_\\text{ox}\\frac{W}{L}V_\\text{ov}.\n\\]\nHence, for a device of fixed geometry, \\(g_m\\) rises linearly with over-drive. (Equivalently one may write \\(g_m=2I_D/V_\\text{ov}\\); because \\(I_D\\) itself grows as \\(V_\\text{ov}^2\\), the net dependence on \\(V_\\text{ov}\\) remains positive.)\n\nStudent B’s claim would be true only under the additional constraint of constant current ( whi<|eos|>",
        "format": "markdown",
        "sha256": "af59e40a52b08a70563a4cd302a82eeeb6fbb83da4216df9a1abfd3f0f38a70a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for fixed device geometry and derives the linear increase of gm with overdrive; the fixed-current qualification for Student B is also noted.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 236,
        "output_tokens": 1226,
        "total_tokens": 1462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1011,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 236,
        "output_tokens": 1226,
        "total_tokens": 1462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1011,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The drain current of a MOSFET in saturation obeys the square-law relation\n\\[\nI_D=\\frac12\\mu C_\\mathrm{ox}\\frac{W}{L}V_\\mathrm{ov}^2,\n\\]\nwhere the over-drive voltage is defined by \\(V_\\mathrm{ov}=V_{GS}-V_t\\).  \nTransconductance is the partial derivative\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}=\\mu C_\\mathrm{ox}\\frac{W}{L}V_\\mathrm{ov}.\n\\]\nHence, for a device of fixed geometry, \\(g_m\\) rises linearly with \\(V_\\mathrm{ov}\\). (Equivalently one may write \\(g_m=\\sqrt{2\\mu C_\\mathrm{ox}(W/L)I_D}\\); raising \\(V_\\mathrm{ov}\\) at constant \\(W/L\\) also raises \\(I_D\\), so \\(g_m\\) still increases.)\n\nThe alternative expression \\(g_m=2I_D/V_\\mathrm{ov}\\) appears to suggest the opposite dependence, but it applies only when \\(I_D\\) is deliberately held constant (which forces \\(W/L\\) to change). No such constraint is stated in the problem, so the direct relationship \\(g_m\\propto V_\\mathrm{ov}\\) governs and Student A is correct.\n\nFinal answer: A",
        "format": "markdown",
        "sha256": "b6d641a77aff2583dc3eb4212189aa64f0767936bba341fdbff3b8aaca2a09d7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that for fixed device geometry, increasing overdrive raises drain current and gm increases linearly, so Student A is correct. The wording about the constant-current form is slightly imprecise, but does not affect the conclusion.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 236,
        "output_tokens": 1527,
        "total_tokens": 1763,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1226,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 236,
        "output_tokens": 1527,
        "total_tokens": 1763,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1226,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal behavior of a MOSFET is obtained by linearizing the large-signal device equations about a DC operating point. This yields the same set of incremental parameters for either carrier type:\n\n- \\(g_m = \\partial I_D/\\partial V_{GS}\\)\n- \\(g_{mb} = \\partial I_D/\\partial V_{BS}\\)\n- \\(r_o = (\\partial I_D/\\partial V_{DS})^{-1}\\)\n\n(and the various capacitances \\(C_{gs}\\), \\(C_{gd}\\), etc.).\n\nBecause the linearization is performed on the magnitudes of the bias quantities, the resulting equivalent circuit (voltage-controlled current source \\(g_m v_{gs}\\) in parallel with \\(r_o\\), plus the body-effect source and capacitors) is topologically identical for NMOS and PMOS devices. Only the algebraic signs that relate the small-signal voltages and currents to the associated large-signal terminal quantities differ; once those signs are absorbed into the definitions of the node variables, the small-signal schematic itself is the same.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "4501d668f3ae272dd00db1ab67b6e0c9b9d159c55133ae5f1fb4dd538f61814c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says the PMOS small-signal model is the same in form as the NMOS model, with differences handled by polarity and sign conventions.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 226,
        "output_tokens": 751,
        "total_tokens": 977,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 226,
        "output_tokens": 751,
        "total_tokens": 977,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal models of PMOS and NMOS devices are identical in form (same controlled sources, parasitic capacitances, and output resistance). This holds because small-signal analysis linearizes about a bias point and is concerned only with incremental voltages/currents; device polarity is already absorbed into the signs of the bias quantities and into the definitions of the small-signal parameters themselves (\\(g_m\\), \\(g_{mb}\\), \\(r_o\\), \\(C_{gs}\\), etc.).\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "29b7869ecea0a048d7b07685cd288bb91858cca455134fd0f0703a60b40be90a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model is the same in form as the NMOS model, which earns full credit under the golden solution.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 226,
        "output_tokens": 466,
        "total_tokens": 692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 226,
        "output_tokens": 466,
        "total_tokens": 692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal (incremental) models of NMOS and PMOS devices are identical in topology and in the definitions of the small-signal parameters (\\(g_m\\), \\(g_{mb}\\), \\(r_o\\), etc.).\n\nBoth devices are governed by the same large-signal equations (with the obvious sign changes in terminal voltages and currents that arise from the opposite carrier type). When those equations are linearized about a DC operating point, the resulting incremental relationships among \\(v_{gs}\\), \\(v_{bs}\\), \\(v_{ds}\\) and the controlled current \\(i_d\\) are exactly the same. Consequently the familiar hybrid-\\(\\pi\\) (or T) equivalent circuit is drawn identically for either device; only the numerical values of the parameters change with the bias point and with the process transconductance parameter \\(\\mu C_{ox}\\).\n\n(The same statement holds for the inclusion of capacitances: \\(C_{gs}\\), \\(C_{gd}\\), \\(C_{gb}\\), \\ldots appear in the same places and are calculated from the same expressions.)\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "544c6542fad0f687033244c10f471f9d6e68b7b5ca714ed8c7ced1601fcb0a9c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form and topology, with polarity conventions accounted for, satisfying the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 226,
        "output_tokens": 512,
        "total_tokens": 738,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 226,
        "output_tokens": 512,
        "total_tokens": 738,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows a **diode-connected NMOS** transistor \\(M_1\\) (gate shorted to drain). The source is grounded, \\(V_X\\) is applied as \\(V_{DS} = V_{GS}\\), and \\(I_X\\) is the resulting drain current.\n\n**Operating regions:**\n- For \\(V_X < V_t\\) (threshold voltage): \\(M_1\\) is **off**, so \\(I_X = 0\\).\n- For \\(V_X \\geq V_t\\): \\(M_1\\) is **on** and in **saturation** (since \\(V_{DS} = V_{GS}\\) satisfies \\(V_{DS} > V_{GS} - V_t\\)). The current follows the square-law relation\n\\[\nI_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_t)^2.\n\\]\n\n**Sketch of \\(I_X\\) vs. \\(V_X\\):**\n- Horizontal axis: \\(V_X\\)\n- Vertical axis: \\(I_X\\)\n- \\(I_X = 0\\) for all \\(V_X < V_t\\)\n- For \\(V_X \\geq V_t\\), a parabola opening upwards, starting from the point \\((V_t, 0)\\)\n\n```text\nI_X\n |\n |         /\n |        /\n |       /\n |      /\n |     /\n |____/__________ V_X\n     Vt\n```\n\n(Ideal long-channel model; channel-length modulation and subthreshold conduction neglected.)",
        "format": "markdown",
        "sha256": "abacc2c98200ed24871f85a40fa14bf827b540c6cd3e3ac831751d689b3b8661"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives the expected near-zero current below threshold and square-law rise above threshold in saturation. The ideal-model assumptions are appropriate; negative-VX behavior is not required.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1246,
        "output_tokens": 1368,
        "total_tokens": 2614,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1017,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1246,
        "output_tokens": 1368,
        "total_tokens": 2614,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1017,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows a **diode-connected NMOS** transistor \\(M_1\\) (gate shorted to drain). The source is grounded, and \\(V_X\\) is applied to the gate/drain node. Current \\(I_X\\) is defined positive into the drain.\n\n**Region analysis:**\n\n- For \\(V_X < V_{TH}\\) (including all \\(V_X < 0\\)): \\(M_1\\) is **off**, so \\(I_X = 0\\).\n- For \\(V_X \\geq V_{TH}\\): \\(M_1\\) is **on** and operates in **saturation** (since \\(V_{DS} = V_{GS}\\)). Thus,\n\\[\nI_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2\n\\]\n(quadratic dependence on \\(V_X\\)).\n\n**Sketch of \\(I_X\\) vs. \\(V_X\\)**:\n\n```\nI_X\n |\n |                    /\n |                  /\n |                /\n |              /\n |            /\n |          /\n |        /\n |      /\n |    /\n |  /\n | /\n |/_______________________ V_X\n      V_TH\n```\n\n- Horizontal axis: \\(V_X\\)\n- Vertical axis: \\(I_X\\)\n- \\(I_X = 0\\) for \\(V_X < V_{TH}\\)\n- Parabolic rise for \\(V_X > V_{TH}\\)",
        "format": "markdown",
        "sha256": "73e5fc7d1ef0baed60a4c1697ad929ace235a47e592e7fc7ddb88ca2d450ec5f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives the required near-zero current below threshold and quadratic rise above it. The overbroad claim about negative VX concerns a secondary range and does not change the essential answer.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1246,
        "output_tokens": 1707,
        "total_tokens": 2953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1381,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1246,
        "output_tokens": 1707,
        "total_tokens": 2953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1381,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows a **diode-connected NMOS** transistor \\(M_1\\) (gate shorted to drain, source grounded).\n\n**Operating regions:**\n- For \\(V_X < V_t\\) (threshold voltage of \\(M_1\\)): \\(M_1\\) is **off**, so \\(I_X = 0\\).\n- For \\(V_X \\geq V_t\\): \\(M_1\\) is **on** and saturated (\\(V_{DS} = V_{GS}\\)), so\n\\[\nI_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_t)^2\n\\]\n(square-law characteristic).\n\n**Sketch of \\(I_X\\) vs. \\(V_X\\):**\n\n```\nI_X\n ↑\n |                 /\n |                /\n |               /\n |              /\n |             /\n |            /\n |           /\n |          /\n |         /\n |        /\n |       /\n |______/________________→ V_X\n      V_t\n```\n\n- \\(I_X = 0\\) for all \\(V_X < V_t\\)\n- Quadratic rise for \\(V_X > V_t\\)",
        "format": "markdown",
        "sha256": "ea5169128d126600f34a94b3f593ba30ed44432d1eab1498ae95d6db1c2c6df5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold, and shows the square-law rise above threshold.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1246,
        "output_tokens": 1475,
        "total_tokens": 2721,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1246,
        "output_tokens": 1475,
        "total_tokens": 2721,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows an **NMOS transistor** \\(M_1\\) with:\n- \\(V_{GS} = V_X\\)\n- \\(V_{DS} = 1\\,\\text{V}\\) (fixed)\n- \\(I_X = I_D\\) (drain current)\n\n**Qualitative \\(I_X\\) vs. \\(V_X\\) characteristic:**\n\n- For \\(V_X < V_t\\) (cutoff): \\(I_X = 0\\)\n- For \\(V_t \\leq V_X \\leq V_t + 1\\) (saturation):  \n  \\[\n  I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_t)^2\n  \\]\n  (quadratic rise)\n- For \\(V_X > V_t + 1\\) (triode/linear region):  \n  \\[\n  I_X = \\mu_n C_{ox}\\frac{W}{L}\\left[(V_X - V_t)(1) - \\frac{1}{2}(1)^2\\right]\n  \\]\n  (linear rise with \\(V_X\\))\n\n**Sketch:**\n\n```\nI_X\n |\n |                    /\n |                  /\n |                /\n |              /\n |            /\n |          /\n |        /\n |      /|\n |    /  |\n |  /    |\n |/______|________________ V_X\n 0      V_t   V_t+1\n```\n\n- Horizontal axis: \\(V_X\\)\n- Vertical axis: \\(I_X\\)\n- Curve is zero until \\(V_t\\), then parabolic, then straight line with reduced slope after \\(V_t+1\\).",
        "format": "markdown",
        "sha256": "b3c110b61dd8b0efcb49906ecd0ce71e554ef1beab567854bf3ebd60e2e09d45"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, quadratic saturation rise up to V_t+1 V, and roughly linear triode-region rise beyond it.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1382,
        "output_tokens": 1482,
        "total_tokens": 2864,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1102,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1382,
        "output_tokens": 1482,
        "total_tokens": 2864,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1102,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of an **NMOS transistor** \\(M_1\\) with:\n- Gate terminal driven by the independent voltage source \\(V_X\\) (i.e., \\(V_{GS}=V_X\\))\n- Source and body terminals grounded\n- Drain terminal biased at a fixed voltage of \\(+1\\,\\text{V}\\) through the independent voltage source (i.e., \\(V_{DS}=1\\,\\text{V}\\))\n- Current \\(I_X\\) defined as the drain current \\(I_D\\) leaving the \\(+1\\,\\text{V}\\) source and entering the drain of \\(M_1\\)\n\n**Qualitative \\(I_X\\)–\\(V_X\\) characteristic** (enhancement-mode device with threshold \\(V_t>0\\)):\n\n- **Cutoff region** (\\(V_X < V_t\\)):  \n  \\(I_X=0\\)\n\n- **Saturation region** (\\(V_t \\leq V_X \\leq V_t+1\\)):  \n  \\[\n  I_X=\\frac{1}{2}\\mu_n C_{\\rm ox}\\frac{W}{L}(V_X-V_t)^2\n  \\]\n  (square-law dependence on \\(V_X\\))\n\n- **Triode (linear) region** (\\(V_X > V_t+1\\)):  \n  \\[\n  I_X=\\mu_n C_{\\rm ox}\\frac{W}{L}\\Bigl[(V_X-V_t)\\cdot 1-\\frac{1}{2}(1)^2\\Bigr]\n  \\]\n  (approximately linear dependence on \\(V_X\\))\n\n**Sketch** (axes: horizontal \\(V_X\\), vertical \\(I_X\\)):\n\n```\nI_X\n ^\n |                 /\n |                /\n |               /   (triode)\n |              /\n |             /\n |            •  ← V_X = V_t + 1\n |           /\n |          /   (saturation, parabolic)\n |         /\n |        /\n |_______•________________________> V_X\n        V_t\n         (cutoff: I_X=0)\n```\n\n(The precise numerical value of \\(V_t\\) and the process transconductance parameter are not required for a qualitative sketch.)",
        "format": "markdown",
        "sha256": "873cffe8271db923fc5b0f0280dbeaa3254d9d5284bfde36bf4204016cd27809"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, quadratic saturation, and roughly linear triode regions, with the transition at VX = Vt + 1 V and consistent current equations.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1382,
        "output_tokens": 1785,
        "total_tokens": 3167,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1287,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1382,
        "output_tokens": 1785,
        "total_tokens": 3167,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1287,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of an **enhancement-mode NMOS** transistor \\(M_1\\) with:\n- \\(V_{GS} = V_X\\)\n- \\(V_{DS} = 1\\,\\text{V}\\) (constant)\n- \\(I_D = I_X\\)\n\n**Region analysis:**\n\n1. **Cutoff** (\\(V_X < V_t\\)):  \n   \\(I_X = 0\\)\n\n2. **Saturation** (\\(V_t \\leq V_X \\leq V_t + 1\\)):  \n   \\[\n   I_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_t)^2\n   \\]\n   (quadratic)\n\n3. **Triode/linear** (\\(V_X > V_t + 1\\)):  \n   \\[\n   I_X = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_X - V_t)(1) - \\frac{1}{2}(1)^2 \\right]\n   \\]\n   (linear in \\(V_X\\))\n\n**Sketch of \\(I_X\\) vs \\(V_X\\)**:\n\n```\nI_X\n |\n |                 / \n |                /\n |               /\n |              /\n |             /\n |          _/\n |        _/\n |      _/\n |____/\n |\n +------------------------ V_X\n      V_t   V_t+1\n```\n\n- Flat zero line for \\(V_X < V_t\\)\n- Parabolic rise in saturation\n- Continues as a straight line (positive slope) in triode  \n(The transition at \\(V_X = V_t + 1\\) is smooth; exact \\(V_t\\) and \\(k_n = \\mu_n C_{ox} W/L\\) are device-dependent and left symbolic.)",
        "format": "markdown",
        "sha256": "59d1f78edaf6609d6cfba9027c118e82eea3df736938bbdf41e0d33f893dca2f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions and gives the expected quadratic rise followed by a roughly linear rise beyond VX = VTH + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1382,
        "output_tokens": 3688,
        "total_tokens": 5070,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3267,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1382,
        "output_tokens": 3688,
        "total_tokens": 5070,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3267,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The device in the figure is a MOSFET (\\(M_1\\)) with its **gate terminal shorted to its source terminal**. Both of these terminals are grounded, so\n\n\\[\nV_{GS} = 0.\n\\]\n\n- For a standard enhancement-mode MOSFET (the type almost always assumed when the device is simply labeled \\(M_1\\)), the threshold voltage satisfies \\(V_t > 0\\) (NMOS) or \\(V_t < 0\\) (PMOS).  \n- Consequently the transistor is in **cutoff** and the drain current is ideally zero for any value of \\(V_{DS}\\).\n\nA current source (or current sink) must deliver a well-defined, non-zero current that is essentially independent of the voltage across its terminals. Because the MOSFET shown is permanently off, it cannot perform that function.\n\n(If the device were a depletion-mode FET the situation would be different, but nothing in the schematic indicates a depletion-mode device.)\n\n**Answer:** No",
        "format": "markdown",
        "sha256": "3402d2b3976f789c08e3e7af907c1d4682ff76673d363a76de078422161b53a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misreads the connections: M1 is a diode-connected PMOS with its gate and drain grounded, not a device with gate and source grounded. The cutoff argument therefore misses the actual low-impedance behavior that prevents it from acting as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 658,
        "output_tokens": 3363,
        "total_tokens": 4021,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 658,
        "output_tokens": 3363,
        "total_tokens": 4021,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a diode-connected MOSFET \\(M_1\\) (gate shorted to drain), with the source (and bulk) terminal(s) grounded. \n\nA current source requires high output impedance and the ability to deliver a (roughly) constant current over a range of output voltages. \n\n- In the diode-connected configuration, \\(V_{DS} = V_{GS}\\). The device therefore operates at the edge of saturation, and its \\(I\\)-\\(V\\) characteristic is set by the MOSFET square law:\n  \\[\n  I_X = \\frac{1}{2}\\mu C_{ox}\\frac{W}{L}(V_{GS}-V_t)^2\n  \\]\n  (or the corresponding subthreshold exponential).  \n- Consequently the voltage that appears at the drain is determined by whatever current is forced into the device; the circuit simply behaves as a non-linear “MOS diode.”  \n- The small-signal resistance looking into the drain is only \\(1/g_m\\), which is low.\n\nHence the network cannot enforce a constant current and does **not** function as a current source.\n\nFinal answer: no",
        "format": "markdown",
        "sha256": "9f4db4ea66358d281572a2b3918766582851f10eb29713471e926a9e99110bd0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly concludes that the diode-connected device has low small-signal resistance and cannot act as a current source, but it misplaces the source at ground and uses NMOS-style polarity rather than identifying the drawn PMOS and its connections.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 658,
        "output_tokens": 4744,
        "total_tokens": 5402,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4503,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 658,
        "output_tokens": 4744,
        "total_tokens": 5402,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4503,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure depicts a FET \\(M_1\\) (either a JFET or a depletion-mode MOSFET) in which the **gate is shorted to the source**. Both terminals are connected to ground, while the drain terminal accepts the current \\(I_X\\).\n\n**Operating principle:**\n- With \\(V_{GS} = 0\\), a depletion-mode device conducts a nonzero current \\(I_{DSS}\\).\n- For drain-source voltages large enough to keep the device in saturation (pinch-off), \n  \\[\n  I_D \\approx I_{DSS} = \\text{constant}.\n  \\]\n- The drain therefore presents a high small-signal impedance, which is precisely the behavior required of a current source (here, a current sink to ground).\n\nHence the two-terminal network shown in the figure functions as a current source.\n\n**Final answer:** yes",
        "format": "markdown",
        "sha256": "37218115f20b90dded84f7728181bfa598ba66a2017a510b209b4c6df2d5a7f7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The device is a diode-connected PMOS, not a gate-to-source-grounded JFET or depletion-mode FET. It presents a low impedance of about 1/gm, so it cannot act as a current source; the answer reaches the opposite conclusion.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 658,
        "output_tokens": 5141,
        "total_tokens": 5799,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4957,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 658,
        "output_tokens": 5141,
        "total_tokens": 5799,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4957,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **PMOS common-source (CS) amplifier** with source degeneration.\n\n**Topology identification**\n- \\(M_1\\) is a P-channel MOSFET.\n- Input \\(V_\\text{in}\\) is applied to the **gate**.\n- Output \\(V_\\text{out}\\) is taken from the **drain**.\n- The source terminal connects to \\(V_{DD}\\) through \\(R_S\\) (degeneration resistor).\n- The drain terminal connects to ground through \\(R_D\\) (load resistor).\n\nThis is the standard CS configuration (inverting voltage amplifier). The resistor \\(R_S\\) provides negative feedback (source degeneration).\n\n**DC operating point (bias)**\n- For \\(M_1\\) to conduct, \\(V_\\text{SG} > |V_{tp}|\\), i.e., the gate must be sufficiently lower than the source.\n- Drain current \\(I_D\\) flows in the path  \n  \\[\n  V_{DD}\\;\\to\\;R_S\\;\\to\\;\\text{source}\\;\\to\\;\\text{drain}\\;\\to\\;R_D\\;\\to\\;0.\n  \\]\n- Consequently the DC output voltage is simply\n  \\[\n  V_\\text{OUT} = I_D R_D.\n  \\]\n\n**Small-signal voltage gain**\nUsing the hybrid-\\(\\pi\\) model (and neglecting channel-length modulation, \\(r_o\\to\\infty\\)) the gain is\n\\[\nA_v = \\frac{v_\\text{out}}{v_\\text{in}} = -\\frac{g_m R_D}{1+g_m R_S}.\n\\]\n- The leading minus sign shows that the amplifier is **inverting**.\n- The factor \\((1+g_m R_S)\\) in the denominator is the degeneration term; it reduces gain but improves linearity and input/output resistance.\n\n**Input and output resistances** (low-frequency)\n- \\(R_\\text{in}=\\infty\\) (MOS gate).\n- \\(R_\\text{out}=R_D\\) (again assuming \\(r_o\\to\\infty\\)).\n\n**Summary of behavior**\n- A positive increment in \\(V_\\text{in}\\) reduces \\(V_\\text{SG}\\), lowers \\(|I_D|\\), and therefore lowers \\(V_\\text{out}\\).\n- Source degeneration desensitizes the gain to transistor parameter variations at the expense of a lower \\(|A_v|\\).\n\n(If body effect or finite \\(r_o\\) must be included, the expressions above are readily extended by replacing \\(g_m\\) with \\(g_m+g_{mb}\\) and adding \\(r_o\\) in parallel with \\(R_D\\).)",
        "format": "markdown",
        "sha256": "2b5241a1f007b03738bbf6e42196920e6e73a0fbbd5e5bea31689a8e4796d005"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain \u001b[0m\u001b[0m\\(-g_mR_D/(1+g_mR_S)\\), matching the full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1429,
        "output_tokens": 1943,
        "total_tokens": 3372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1429,
        "output_tokens": 1943,
        "total_tokens": 3372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **PMOS common-source (CS) amplifier** with source degeneration.\n\n### Topology\n- \\(M_1\\) is a **PMOS** transistor.\n- Input \\(V_\\text{in}\\) is applied to the **gate**.\n- Source terminal connects to \\(V_{DD}\\) through degeneration resistor \\(R_S\\).\n- Drain terminal connects to ground through load resistor \\(R_D\\).\n- Output \\(V_\\text{out}\\) is taken at the **drain**.\n\n### Small-Signal Voltage Gain\nAssuming \\(M_1\\) is in saturation and channel-length modulation is neglected (\\(r_o \\to \\infty\\)):\n\n\\[\nA_v = \\frac{v_\\text{out}}{v_\\text{in}} = -\\frac{g_m R_D}{1 + g_m R_S}\n\\]\n\n- The “\\(-\\)” sign shows that the amplifier is **inverting**.\n- \\(R_S\\) provides local series feedback (source degeneration), which reduces gain but improves linearity and input/output resistance.\n\n### Key Properties\n| Parameter       | Expression                          | Notes                                      |\n|-----------------|-------------------------------------|--------------------------------------------|\n| Voltage gain    | \\(-\\dfrac{g_m R_D}{1+g_m R_S}\\)    | Decreases with larger \\(R_S\\)             |\n| Input resistance| \\(\\infty\\) (ideal)                 | Limited only by bias network (not shown)  |\n| Output resistance| \\(R_D\\) (approx.)                 | Looking into the drain node               |\n\nThis is the PMOS dual of the classic NMOS CS stage with resistive degeneration.",
        "format": "markdown",
        "sha256": "f401c6c74f9c4de33d81332b4551ba3517176fccfbc128cb18304e8a5db80460"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain \u0002-g_mR_D/(1+g_mR_S)\u0002. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1429,
        "output_tokens": 1844,
        "total_tokens": 3273,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1494,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1429,
        "output_tokens": 1844,
        "total_tokens": 3273,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1494,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **PMOS common-source (CS) amplifier** with source degeneration.\n\n**Circuit topology:**\n- \\(M_1\\) is a PMOS transistor.\n- Gate terminal driven by input \\(V_\\text{in}\\) (AC-coupled or biased appropriately for saturation).\n- Source terminal connected to \\(V_{DD}\\) through degeneration resistor \\(R_S\\).\n- Drain terminal connected to ground through load resistor \\(R_D\\), with output taken at the drain node (\\(V_\\text{out}\\)).\n\n**DC operating point (saturation assumed):**\n- Source voltage: \\(V_S = V_{DD} - I_D R_S\\)\n- Gate-source voltage: \\(V_{SG} = V_S - V_\\text{in}\\)\n- Drain voltage / output: \\(V_\\text{out} = I_D R_D\\)\n- Overdrive: \\(V_{SG} > |V_{tp}|\\) and \\(V_{SD} > V_{SG} - |V_{tp}|\\) for saturation.\n\n**Small-signal behavior:**\n- The circuit provides **voltage inversion** (CS stage).\n- Effective transconductance with degeneration:\n  \\[\n  G_m = \\frac{g_m}{1 + g_m R_S}\n  \\]\n- Midband voltage gain:\n  \\[\n  A_v = \\frac{v_\\text{out}}{v_\\text{in}} = -G_m R_D = -\\frac{g_m R_D}{1 + g_m R_S}\n  \\]\n- Input resistance: \\(\\infty\\) (ideal MOSFET gate).\n- Output resistance: \\(R_D \\parallel r_o\\) (where \\(r_o\\) is the transistor Early resistance; often \\(r_o \\gg R_D\\)).\n\n**Key properties:**\n- Source degeneration (\\(R_S\\)) linearizes the amplifier, raises input-referred linearity, and desensitizes gain to \\(g_m\\) variation at the cost of reduced \\(|A_v|\\).\n- The stage is non-inverting from a current perspective but inverting from gate voltage to drain voltage, as expected for CS.",
        "format": "markdown",
        "sha256": "73a3c07ac361666c3af33276c9211167f3927ee8696322f74b8d4cfca98c59d5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain \u0002-g_mR_D/(1+g_mR_S)\u0002. Minor output-resistance and wording imprecisions do not affect the essential analysis.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1429,
        "output_tokens": 1451,
        "total_tokens": 2880,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 979,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1429,
        "output_tokens": 1451,
        "total_tokens": 2880,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 979,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower** (common-drain amplifier).\n\n### Topology\n- \\(M_1\\): enhancement-mode NMOS transistor\n- Gate \\(\\leftarrow V_\\text{in}\\) (input)\n- Drain \\(\\rightarrow V_{DD}\\) (AC ground)\n- Source \\(\\rightarrow R_S \\rightarrow\\) GND, with \\(V_\\text{out}\\) taken at the source\n\n### DC Biasing\nAssuming \\(M_1\\) is in saturation (\\(V_{DS} > V_{GS}-V_{th}\\)):\n\n\\[\nI_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_{th})^2\n\\]\n\n\\[\nV_{GS} = V_\\text{in} - V_\\text{out}, \\quad I_D = \\frac{V_\\text{out}}{R_S}\n\\]\n\nSolving yields the operating point \\(V_\\text{out} = V_\\text{in} - V_{GS}\\) (where \\(V_{GS}>V_{th}\\)).\n\n### Small-Signal Behavior\n- **Voltage gain**:\n\\[\nA_v = \\frac{v_\\text{out}}{v_\\text{in}} = \\frac{g_m R_S}{1+g_m R_S} \\approx 1 \\quad (g_m R_S \\gg 1)\n\\]\n(non-inverting, slightly less than unity)\n\n- **Input resistance**: \\(\\approx\\infty\\) (gate of MOSFET)\n- **Output resistance**: \\(\\approx 1/g_m \\parallel R_S \\approx 1/g_m\\)\n\n### Key Properties\n- Level shifts the input down by \\(V_{GS}\\)\n- Provides current gain / buffering with low output impedance\n- No voltage amplification (\\(|A_v|<1\\))\n\nThis configuration is widely used as a voltage buffer.",
        "format": "markdown",
        "sha256": "7b4688c50a5d14f9776708fa5266253136a16ba3e49d75771eac062c4d9ceb0f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS source follower and gives its positive, less-than-unity gain expression. The supplementary biasing and output-resistance discussion does not detract.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1198,
        "output_tokens": 1069,
        "total_tokens": 2267,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1198,
        "output_tokens": 1069,
        "total_tokens": 2267,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower** (common-drain amplifier).\n\n- **Configuration**:  \n  - Gate terminal driven by \\(V_{\\text{in}}\\)  \n  - Drain terminal tied to \\(V_{DD}\\)  \n  - Source terminal connected to load resistor \\(R_S\\) (to ground)  \n  - Output \\(V_{\\text{out}}\\) taken from the source  \n\n- **DC operation**:  \n  \\[\n  V_{\\text{out}} = V_{\\text{in}} - V_{GS}\n  \\]\n  where \\(V_{GS}\\) satisfies the MOSFET square-law equation for the current \\(I_D = V_{\\text{out}}/R_S\\) (transistor assumed in saturation).\n\n- **Small-signal voltage gain**:  \n  \\[\n  A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_S}{1 + g_m R_S} \\approx 1 \\quad (g_m R_S \\gg 1)\n  \\]\n\n- **Key properties**:  \n  - Voltage gain \\(\\approx +1\\) (non-inverting, slightly less than unity)  \n  - High input impedance  \n  - Low output impedance (\\(\\approx 1/g_m\\))  \n  - Used as a buffer / level shifter  \n\nThis topology provides current gain and impedance transformation while preserving the signal polarity.",
        "format": "markdown",
        "sha256": "61fc172ffdd32bc014699c440b6a9decc1efc1c03b6d5244af0e33dc79a1a1d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain formula; the approximate output resistance is also acceptable.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1198,
        "output_tokens": 1502,
        "total_tokens": 2700,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1201,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1198,
        "output_tokens": 1502,
        "total_tokens": 2700,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1201,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows an **NMOS source follower** (also called a common-drain amplifier).\n\n## Circuit Description\n- **\\(M_1\\)**: NMOS transistor\n- **Drain** of \\(M_1\\) connected to \\(V_{DD}\\)\n- **Gate** of \\(M_1\\) driven by input \\(V_{\\text{in}}\\)\n- **Source** of \\(M_1\\) connected to load resistor \\(R_S\\) (to ground)\n- Output \\(V_{\\text{out}}\\) taken from the source terminal\n\n## DC Operating Point\nAssuming saturation-region operation:\n\n\\[\nI_D = \\frac{1}{2}\\mu_n C_{\\rm ox}\\frac{W}{L}(V_{GS}-V_{th})^2 = \\frac{V_{\\rm out}}{R_S}\n\\]\n\nwith\n\n\\[\nV_{GS}=V_{\\rm in}-V_{\\rm out}\n\\]\n\nThis yields the implicit relationship\n\n\\[\n\\frac{V_{\\rm out}}{R_S}=\\frac{1}{2}k_n(V_{\\rm in}-V_{\\rm out}-V_{th})^2\n\\]\n\n(\\(k_n=\\mu_n C_{\\rm ox}W/L\\)).  \n\\(V_{\\rm out}\\) therefore follows \\(V_{\\rm in}\\) with a DC level shift of approximately \\(V_{GS}\\).\n\n## Small-Signal Behavior\n- **Voltage gain**:\n\\[\nA_v=\\frac{v_{\\rm out}}{v_{\\rm in}}=\\frac{g_m R_S}{1+g_m R_S}\\approx 1\\quad(g_m R_S\\gg 1)\n\\]\n- **Input resistance**: \\(\\infty\\) (gate of MOSFET)\n- **Output resistance**:\n\\[\nR_{\\rm out}=\\frac{1}{g_m}\\parallel R_S\\approx\\frac{1}{g_m}\n\\]\n\n## Function\nThe circuit is a **voltage buffer**: it provides near-unity gain, very high input impedance and low output impedance, and is commonly used for impedance transformation or level shifting.",
        "format": "markdown",
        "sha256": "d4a49f3a39c0d6a2897f9c08d9bc83c3610f1f478c66309121b6f75b3f55e7bc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, with a consistent output-resistance estimate. The extra DC discussion does not contradict the essential answer.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1198,
        "output_tokens": 2764,
        "total_tokens": 3962,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2311,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1198,
        "output_tokens": 2764,
        "total_tokens": 3962,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2311,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-gate (CG) amplifier** using an NMOS transistor \\(M_1\\).\n\n### Topology Identification\n- **Input**: Applied at the **source** terminal (\\(V_{\\text{in}}\\)).\n- **Output**: Taken from the **drain** terminal (\\(V_{\\text{out}}\\)).\n- **Gate**: Biased at a fixed DC voltage (\\(V_{DD}\\)) and AC-grounded.\n- **Load**: Resistive pull-up \\(R_D\\) connected between drain and \\(V_{DD}\\).\n\nThis matches the standard common-gate configuration.\n\n### DC Biasing\n- Since the gate is tied to \\(V_{DD}\\),  \n  \\[\n  V_{GS} = V_{DD} - V_{\\text{in}}.\n  \\]\n- For \\(M_1\\) to operate in saturation (typical for amplification),\n  \\[\n  V_{DD} - V_{\\text{in}} > V_{th} \\quad \\text{and} \\quad V_{\\text{out}} \\ge V_{\\text{in}} + V_{ov},\n  \\]\n  where \\(V_{ov} = V_{GS} - V_{th}\\).\n\n### Small-Signal Behavior\n- The CG stage is a **non-inverting** amplifier.\n- Low-frequency voltage gain (neglecting body effect and channel-length modulation):\n  \\[\n  A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} \\approx +g_m R_D.\n  \\]\n- Input resistance looking into the source is low (\\(\\approx 1/g_m\\)).\n- Output resistance is approximately \\(R_D\\) (or \\(R_D \\parallel r_o\\) if \\(r_o\\) is included).\n\n### Key Properties\n| Property            | Value / Characteristic      |\n|---------------------|-----------------------------|\n| Voltage gain        | Positive (\\(+g_m R_D\\))    |\n| Current gain        | \\(\\approx +1\\)             |\n| Input impedance     | Low (\\(\\sim 1/g_m\\))       |\n| Output impedance    | Moderate-to-high (\\(\\sim R_D\\)) |\n| Bandwidth           | Wide (no Miller effect)    |\n\n### Typical Applications\n- High-frequency amplifiers / RF front-ends (wide bandwidth).\n- Impedance matching (low \\(R_{\\text{in}}\\)).\n- Current buffers.\n- Cable-driving stages.\n\n**Summary**: The circuit is a resistively loaded NMOS common-gate amplifier.",
        "format": "markdown",
        "sha256": "ab559f7b50e2d20e116a905e48034f394895ee3fa8f5f6b291346797a811f3bf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input common-gate topology and gives the expected non-inverting gain and approximately 1/gm input resistance. The extra bias and application comments do not undermine the essential analysis.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1171,
        "output_tokens": 1885,
        "total_tokens": 3056,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1340,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1171,
        "output_tokens": 1885,
        "total_tokens": 3056,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1340,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-gate (CG) amplifier** using an NMOS transistor \\(M_1\\).\n\n### Circuit Configuration\n- **Gate** of \\(M_1\\) is connected directly to the DC supply \\(V_{DD}\\) (AC ground).\n- **Input** \\(V_{\\text{in}}\\) is applied to the **source**.\n- **Output** \\(V_{\\text{out}}\\) is taken from the **drain**.\n- Load resistor \\(R_D\\) is connected between the drain and \\(V_{DD}\\).\n\nThis is the standard common-gate topology.\n\n### DC Biasing\n- \\(V_G = V_{DD}\\) (fixed).\n- \\(V_{GS} = V_{DD} - V_{\\text{in}}\\).\n- For \\(M_1\\) to be on: \\(V_{\\text{in}} < V_{DD} - V_{TH}\\).\n- The drain current \\(I_D\\) (and thus the DC output level \\(V_{\\text{out}} = V_{DD} - I_D R_D\\)) is set by the DC value of \\(V_{\\text{in}}\\) and the device parameters \\(\\left(I_D = \\frac{1}{2}\\mu_n C_{\\text{ox}}\\frac{W}{L}(V_{GS}-V_{TH})^2\\right.\\) in saturation\\(\\bigg)\\).\n- \\(M_1\\) is typically biased in **saturation** for amplification:\n  \\[\n  V_{\\text{out}} \\geq V_{\\text{in}} + V_{OV}\n  \\]\n  (where \\(V_{OV} = V_{GS} - V_{TH}\\)).\n\n### Small-Signal Analysis\nAssuming \\(M_1\\) is in saturation and neglecting channel-length modulation (\\(r_o \\to \\infty\\)) and body effect:\n\n- **Voltage gain** (non-inverting):\n  \\[\n  A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} \\approx +g_m R_D\n  \\]\n\n- **Input resistance** (looking into the source):\n  \\[\n  R_{\\text{in}} \\approx \\frac{1}{g_m}\n  \\]\n\n- **Output resistance** (looking into the drain, with source driven):\n  \\[\n  R_{\\text{out}} \\approx R_D\n  \\]\n\n**Including body effect** (\\(g_{mb}\\)): the effective transconductance becomes \\(g_m + g_{mb} = g_m(1+\\chi)\\), so\n\\[\nA_v \\approx +g_m(1+\\chi)R_D, \\quad R_{\\text{in}} \\approx \\frac{1}{g_m(1+\\chi)}.\n\\]\n\n**Including \\(r_o\\)**: the gain and resistances are modified by the finite Early resistance, but the CG stage still provides a non-inverting gain of order \\(g_m R_D\\) with low \\(R_{\\text{in}}\\) and moderate \\(R_{\\text{out}}\\).\n\n### Key Properties\n- Non-inverting voltage amplification.\n- Low input impedance (\\(\\approx 1/g_m\\)).\n- High output impedance (\\(\\approx R_D\\)).\n- Excellent high-frequency response (no Miller multiplication of \\(C_{GD}\\)).\n- Often used as a current buffer or in cascode arrangements.\n\nThis configuration is the dual of the common-base BJT amplifier.",
        "format": "markdown",
        "sha256": "76f40dd5937d8470e0b9ab2ecc4f38b0db0a0e8856f5972aeafe7834a21ccd07"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and gives the expected non-inverting gain and low input resistance. The additional biasing and body-effect discussion is consistent and does not undermine the essential analysis.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1171,
        "output_tokens": 2727,
        "total_tokens": 3898,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1977,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1171,
        "output_tokens": 2727,
        "total_tokens": 3898,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1977,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **common-gate (CG) amplifier**.\n\n**Topology identification:**\n- \\(M_1\\) is an NMOS transistor.\n- Gate terminal is AC-grounded (tied directly to the supply \\(V_{DD}\\)).\n- Input signal \\(V_{\\text{in}}\\) is applied to the **source**.\n- Output signal \\(V_{\\text{out}}\\) is taken from the **drain**.\n- \\(R_D\\) is the drain (load) resistor.\n\nThis is the standard common-gate configuration.\n\n**Large-signal operation:**\n- The gate-source voltage is\n  \\[\n  V_{GS} = V_{DD} - V_{\\text{in}}.\n  \\]\n- For \\(M_1\\) to conduct,\n  \\[\n  V_{\\text{in}} < V_{DD} - V_{TN}.\n  \\]\n- Drain current \\(I_D\\) (saturation) is set by the overdrive:\n  \\[\n  I_D = \\frac{1}{2}\\mu_n C_{\\text{ox}}\\frac{W}{L}(V_{DD}-V_{\\text{in}}-V_{TN})^2.\n  \\]\n- The corresponding DC output voltage is\n  \\[\n  V_{\\text{out}} = V_{DD} - I_D R_D.\n  \\]\n\n**Small-signal analysis** (body effect included, \\(r_o\\to\\infty\\)):\n\n- \\(v_{gs} = -v_{\\text{in}}\\)\n- \\(v_{bs} = -v_{\\text{in}}\\) (assuming bulk tied to ground)\n- Drain current:\n  \\[\n  i_d = -(g_m + g_{mb})v_{\\text{in}}\n  \\]\n- Output voltage:\n  \\[\n  v_{\\text{out}} = -i_d R_D = (g_m + g_{mb})R_D\\, v_{\\text{in}}\n  \\]\n\n**Key small-signal parameters:**\n- **Voltage gain** (non-inverting):\n  \\[\n  A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = (g_m + g_{mb})R_D\n  \\]\n- **Input resistance** (looking into the source):\n  \\[\n  R_{\\text{in}} = \\frac{1}{g_m + g_{mb}}\n  \\]\n- **Output resistance** (looking into the drain, with source driven by a voltage source):\n  \\[\n  R_{\\text{out}} = R_D\n  \\]\n\n**Summary of properties:**\n- Non-inverting voltage amplification.\n- Low input impedance.\n- High output impedance (set by \\(R_D\\)).\n- Wide bandwidth (no Miller multiplication of \\(C_{gd}\\)).\n\nThe circuit is therefore a classic resistive-load common-gate stage.",
        "format": "markdown",
        "sha256": "ef8492b0c05042c7c7aace29d9eaef81d6fb825b895e5c4274e0c360e1cbdfcf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input common-gate topology and gives the non-inverting gain and low input resistance. Including body effect is a compatible refinement of the golden solution’s approximate expressions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1171,
        "output_tokens": 3789,
        "total_tokens": 4960,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3165,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1171,
        "output_tokens": 3789,
        "total_tokens": 4960,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3165,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-gate (CG) amplifier**.\n\n### DC Biasing\n- Transistor \\(M_1\\) is an NMOS device.\n- The gate is held at a fixed DC bias voltage \\(V_b\\).\n- The source is DC-grounded.\n- The drain is biased through load resistor \\(R_D\\) connected to \\(V_{DD}\\).\n- Capacitor \\(C_1\\) provides AC coupling of the input signal while blocking DC.\n\n### Small-Signal Operation (Midband)\n- \\(C_1\\) acts as a short circuit for AC signals.\n- The gate is an AC ground (\\(v_g = 0\\)).\n- The input signal \\(v_{\\text{in}}\\) is applied at the source.\n- The output is taken at the drain.\n\n**Key small-signal parameters:**\n- \\(v_{gs} = -v_{\\text{in}}\\)\n- Body effect is present (\\(v_{bs} = -v_{\\text{in}}\\)), since the bulk is typically grounded.\n\n**Drain current:**\n\\[\ni_d = (g_m + g_{mb})v_{\\text{in}}\n\\]\n\n**Voltage gain:**\n\\[\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = +(g_m + g_{mb})R_D\n\\]\n(assuming \\(r_o \\to \\infty\\)).\n\n**Input impedance** (looking into the source):\n\\[\nR_{\\text{in}} \\approx \\frac{1}{g_m + g_{mb}}\n\\]\n\n**Output impedance** (looking into the drain, with source degenerated by the signal source resistance):\n\\[\nR_{\\text{out}} \\approx R_D \\parallel r_o\\bigl(1 + (g_m + g_{mb})R_S\\bigr)\n\\]\n(where \\(R_S\\) is the source resistance of \\(v_{\\text{in}}\\)).\n\nThis topology provides a non-inverting voltage gain, relatively low input impedance, and high output impedance, and is commonly used for broadband amplification or as a current buffer.",
        "format": "markdown",
        "sha256": "f8ad23fa0a2d3ffdf823ca2ab836dc5361e1e5a6b4e8dff7c9b9491df3fdac2a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the common-gate topology and source input, but misses that the source node is hard-shorted to ground and incorrectly predicts nonzero gain.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1688,
        "output_tokens": 1684,
        "total_tokens": 3372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1228,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1688,
        "output_tokens": 1684,
        "total_tokens": 3372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1228,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of an **NMOS transistor** \\(M_1\\) with the following connections:\n\n- **Drain** terminal connected to \\(V_{DD}\\) through load resistor \\(R_D\\), with output taken at this node (\\(V_{\\text{out}}\\)).\n- **Gate** terminal biased by a fixed DC voltage \\(V_b\\).\n- **Source** terminal connected directly to ground, and also connected to the input \\(V_{\\text{in}}\\) through coupling capacitor \\(C_1\\).\n\n### DC Operating Point\n- Source is at \\(0\\,\\text{V}\\), so \\(V_{GS} = V_b\\).\n- For \\(M_1\\) to be on: \\(V_b > V_{TH}\\).\n- Assuming saturation-region operation, the bias current is set entirely by the gate bias:\n\\[\nI_D = \\frac{1}{2}\\mu_n C_{\\text{ox}}\\frac{W}{L}(V_b - V_{TH})^2\n\\]\n(neglecting channel-length modulation).\n- The corresponding DC output level is\n\\[\nV_{\\text{OUT,DC}} = V_{DD} - I_D R_D.\n\\]\n\n### Small-Signal (AC) Behavior\n- At signal frequencies, \\(C_1\\) behaves as a short circuit.\n- However, the source node is **hard-wired to ground**. Consequently:\n  - The right-hand plate of \\(C_1\\) is held at AC ground.\n  - The entire input voltage \\(v_{\\text{in}}\\) appears across \\(C_1\\) and the resulting current flows harmlessly to ground.\n  - \\(v_s = 0\\) and \\(v_g = 0\\) (since \\(V_b\\) is a DC source), therefore \\(v_{gs} = 0\\).\n- The voltage-controlled current source of the MOSFET is zero (\\(g_m v_{gs} = 0\\)).\n- **Voltage gain**:\n\\[\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = 0.\n\\]\n\n### Conclusion\nAlthough the topology superficially resembles a common-gate stage, the explicit ground connection at the source shunts the entire AC input signal. The circuit produces a well-defined DC bias point but **does not amplify** \\(V_{\\text{in}}\\). \n\n(If the ground connection at the source were replaced by a current source or a resistor to ground, the circuit would become a functional common-gate amplifier with \\(A_v \\approx +g_m R_D\\) and \\(R_{\\text{in}} \\approx 1/g_m\\). As drawn, however, that is not the case.)",
        "format": "markdown",
        "sha256": "92ab61be8d42e2b57fa280a5b5bc647a0a1ce7465cd3af8655fa4c494916a7f0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input produces no small-signal source voltage and the ideal voltage gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1688,
        "output_tokens": 8256,
        "total_tokens": 9944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7672,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1688,
        "output_tokens": 8256,
        "total_tokens": 9944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7672,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of an **NMOS transistor** (\\(M_1\\)) in a **common-gate** topology with the following connections:\n\n- **Drain** of \\(M_1\\) connected to load resistor \\(R_D\\) (to \\(V_{DD}\\)) and to output node \\(V_{\\text{out}}\\).\n- **Gate** of \\(M_1\\) biased by DC voltage \\(V_b\\).\n- **Source** of \\(M_1\\) connected directly to ground and (via coupling capacitor \\(C_1\\)) to input \\(V_{\\text{in}}\\).\n\n---\n\n### DC Analysis\n- Source is hard-wired to \\(0\\,\\text{V}\\).\n- Gate-source voltage is fixed: \\(V_{GS} = V_b\\).\n- For \\(M_1\\) to conduct, \\(V_b > V_{th}\\).\n- Assuming saturation and neglecting channel-length modulation,\n\\[\nI_D = \\frac{1}{2}\\mu_n C_{\\text{ox}}\\frac{W}{L}(V_b - V_{th})^2.\n\\]\n- DC output voltage:\n\\[\nV_{\\text{out}} = V_{DD} - I_D R_D.\n\\]\n- For saturation: \\(V_{\\text{out}} \\ge V_b - V_{th}\\).\n\n---\n\n### Small-Signal (AC) Analysis\n- Capacitor \\(C_1\\) couples \\(V_{\\text{in}}\\) to the source node.\n- However, the source node is **also shorted to AC ground**.\n- Gate is held at AC ground by ideal bias \\(V_b\\).\n- Therefore \\(v_{gs} = 0\\), the dependent current source \\(g_m v_{gs}\\) is zero, and\n\\[\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = 0.\n\\]\n- The only impedance seen by the input source is that of \\(C_1\\) to ground:\n\\[\nZ_{\\text{in}}(s) = \\frac{1}{sC_1}.\n\\]\n\n---\n\n### Conclusion\nAs drawn, the circuit sets a DC bias point at the drain but **does not amplify** the input signal \\(V_{\\text{in}}\\). The intentional AC ground at the source prevents any signal from developing \\(v_{gs}\\).\n\n(If the direct ground connection at the source were replaced by a current source or large bias resistor—the usual practical realization of a common-gate stage—the small-signal voltage gain would become the classic common-gate result \\(A_v \\approx +g_m R_D\\), with \\(R_{\\text{in}} \\approx 1/g_m\\).)",
        "format": "markdown",
        "sha256": "0ebc8599152fdb534a26a700d571075f8205394d1e81226bcb663b0f9d61ec19"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source node is hard-shorted to AC ground, so the input cannot produce a source signal and the ideal voltage gain is zero. The additional bias and input-impedance discussion does not undermine the essential conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1688,
        "output_tokens": 5686,
        "total_tokens": 7374,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1688,
        "output_tokens": 5686,
        "total_tokens": 7374,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5092,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-source amplifier including the MOSFET parasitic capacitances. The source terminal of \\(M_1\\) is connected directly to ground.\n\nThe capacitors present are \\(C_{GS}\\), \\(C_{GD}\\), \\(C_{DB}\\), and \\(C_{SB}\\). With the source node at AC ground, \\(C_{SB}\\) is shorted out and has no effect on the circuit behavior. This leaves three capacitors.\n\nThese three capacitors are connected to only two circuit nodes whose voltages are free to vary (the gate node and the drain/output node). The capacitor voltages are therefore not all independent; the system has only two independent energy storage elements (i.e., it is a second-order linear network).\n\nThe small-signal nodal equations at the gate and drain are simultaneously solved for the transfer function \\(V_{\\rm out}(s)/V_{\\rm in}(s)\\). The denominator of this transfer function is a quadratic polynomial in \\(s\\), confirming that there are exactly **two poles**.\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "cff1ed4ad3152719925b615cd6d114024c3848cec245303d9e5208a9a9bebaa1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that CSB is shorted out, the remaining capacitor voltages have only two independent degrees of freedom, and the transfer function has a quadratic denominator.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1885,
        "output_tokens": 3445,
        "total_tokens": 5330,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3228,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1885,
        "output_tokens": 3445,
        "total_tokens": 5330,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3228,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-source amplifier. For purposes of small-signal analysis, \\(V_{DD}\\) is an AC ground and the source terminal of \\(M_1\\) is (AC) grounded.\n\nThe capacitors present in the small-signal model are \\(C_{GS}\\), \\(C_{GD}\\), \\(C_{DB}\\), and \\(C_{SB}\\). With the source terminal grounded, both terminals of \\(C_{SB}\\) are at ground potential. This capacitor is therefore short-circuited and does not affect the circuit dynamics.\n\nThis leaves the three capacitors \\(C_{GS}\\), \\(C_{GD}\\), and \\(C_{DB}\\). These three elements form a capacitive loop\n\\[\nv_{GS} = v_{GD} + v_{DB}.\n\\]\nThe loop imposes a linear dependence among the three capacitor voltages, so only two of the capacitor voltages can be chosen independently. Equivalently, the circuit possesses only two independent energy-storage elements.\n\nNodal analysis at the gate and drain nodes produces a \\(2\\times 2\\) admittance matrix whose determinant is a quadratic polynomial in \\(s\\). Consequently the transfer function \\(V_{\\mathrm{out}}(s)/V_{\\mathrm{in}}(s)\\) has a second-order denominator and the circuit has **two poles**.\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "c560e1dac5fa357bbd0363375745fe2a4bb6c21d2024ecd80220aa41b44048a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that CSB is shorted because both terminals are grounded, and that CGS, CGD, and CDB form a loop with only two independent capacitor voltages, yielding two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1885,
        "output_tokens": 9948,
        "total_tokens": 11833,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9669,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1885,
        "output_tokens": 9948,
        "total_tokens": 11833,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9669,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-source amplifier (source terminal of \\(M_1\\) at AC ground). The capacitors present in the small-signal model are \\(C_{GS}\\), \\(C_{GD}\\), \\(C_{DB}\\), and \\(C_{SB}\\).\n\n- Since the source terminal is at AC ground and the body terminal is at AC ground, \\(C_{SB}\\) has both terminals at the same potential. It is shorted and does not affect the dynamics.\n- This leaves the three capacitors \\(C_{GS}\\), \\(C_{GD}\\), and \\(C_{DB}\\).\n\nThese three capacitors form a loop (gate–ground–drain–gate). The capacitor voltages are therefore linearly dependent, and there are only **two independent initial conditions**.\n\nEquivalently, by nodal analysis there are exactly two nodes with non-trivial time-varying voltages (the gate node and the drain node). The \\(2 \\times 2\\) node-admittance matrix has entries that are at most linear in \\(s\\), so its determinant is a quadratic polynomial in \\(s\\). The transfer function \\(V_{\\text{out}}(s)/V_{\\text{in}}(s)\\) is therefore of order 2.\n\nThe circuit has **2 poles**.\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "0b2c95bfee9d06725d995099a83351bebf5d33a181e607f6b376d2eb18b98b8d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that C_SB is grounded at both terminals and that the remaining three capacitors form a loop with only two independent capacitor voltages, yielding two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1885,
        "output_tokens": 9685,
        "total_tokens": 11570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1885,
        "output_tokens": 9685,
        "total_tokens": 11570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit is a **common-gate (CG) MOSFET amplifier** with **voltage-series negative feedback** applied via the resistive divider \\(R_1\\)-\\(R_2\\).\n\n### Circuit Description\n- \\(M_1\\) is an **NMOS** transistor (enhancement-mode).\n- **Input** \\(v_{\\operatorname{in}}\\) is applied at the **source**.\n- **Output** \\(v_{\\operatorname{out}}\\) is taken at the **drain**.\n- Drain resistor \\(R_D\\) connects to the positive supply \\(V_{DD}\\).\n- The gate is biased by the feedback network:\n  \\[\n  v_F = \\beta \\, v_{\\operatorname{out}}, \\quad \\beta = \\frac{R_2}{R_1 + R_2}.\n  \\]\n- This produces a gate-source voltage\n  \\[\n  v_{GS} = v_F - v_{\\operatorname{in}} = \\beta v_{\\operatorname{out}} - v_{\\operatorname{in}}.\n  \\]\n\n### DC Operating Point (qualitative)\nIn steady state the NMOS carries a drain current set by \\(R_D\\):\n\\[\nI_D \\approx \\frac{V_{DD} - V_{\\operatorname{out}}}{R_D}\n\\]\n(neglecting the small current drawn by the feedback divider).  \nThe gate voltage sits one \\(V_{GS}\\) above the source:\n\\[\nV_F = V_{\\operatorname{in}} + V_{GS}(I_D) \\implies V_{\\operatorname{out}} = \\frac{V_{\\operatorname{in}} + V_{GS}}{\\beta}.\n\\]\nThus the circuit simultaneously level-shifts by \\(V_{GS}\\) and amplifies by \\(1/\\beta\\).\n\n### Small-Signal Voltage Gain\nNeglecting channel-length modulation (\\(r_o\\to\\infty\\)) and the body effect, the drain current is\n\\[\ni_d = g_m(v_F - v_{\\operatorname{in}}) = g_m(\\beta v_{\\operatorname{out}} - v_{\\operatorname{in}}).\n\\]\nKCL at the drain node (with \\(V_{DD}\\) an AC ground) yields\n\\[\ni_d = -v_{\\operatorname{out}}\\left(\\frac{1}{R_D}+\\frac{1}{R_1+R_2}\\right).\n\\]\nEquating the two expressions and solving for the gain gives\n\\[\nA_v = \\frac{v_{\\operatorname{out}}}{v_{\\operatorname{in}}} = \\frac{g_m}{\\dfrac{1}{R_D}+\\dfrac{1}{R_1+R_2}+g_m\\beta}.\n\\]\n**Special cases**\n- If the feedback divider is light (\\(R_1+R_2\\gg R_D\\)):\n  \\[\n  A_v \\approx \\frac{g_m R_D}{1 + g_m R_D\\beta} = \\frac{A_0}{1 + A_0\\beta},\n  \\]\n  where \\(A_0 = g_m R_D\\) is the open-loop CG gain.  \n- When the loop gain is large (\\(g_m R_D\\beta\\gg 1\\)):\n  \\[\n  A_v \\to \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}.\n  \\]\n  (The MOSFET forces \\(v_{GS}\\approx 0\\), i.e. \\(v_F\\approx v_{\\operatorname{in}}\\).)\n\nThe feedback is **negative**: an increase in \\(v_{\\operatorname{in}}\\) tends to reduce \\(i_d\\) and therefore raise \\(v_{\\operatorname{out}}\\); the rise in \\(v_F\\) counteracts the original change in \\(v_{GS}\\).\n\n### Input & Output Resistances (qualitative)\n- **Input resistance** (looking into the source) is low, on the order of \\(1/g_m\\) modified by the loop gain; feedback further lowers it.\n- **Output resistance** is approximately \\(R_D\\parallel(R_1+R_2)\\) reduced by the factor \\((1+A_0\\beta)\\).\n\n### Summary of Behaviour\nThe circuit realises a **non-inverting amplifier** whose ideal closed-loop gain is set by the resistor ratio \\(1+R_1/R_2\\). The common-gate device supplies the forward gain and the low input impedance characteristic of the CG topology, while the drain-to-gate resistive divider stabilises the gain and the bias point.",
        "format": "markdown",
        "sha256": "b265b445a78822ede211db8373a3d9d2a132f60f621d04ca1cf0fa728e696870"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, negative feedback, and derives the correct closed-loop gain. The secondary input-resistance and DC comments do not contradict the essential topology or gain.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1573,
        "output_tokens": 4550,
        "total_tokens": 6123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3551,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1573,
        "output_tokens": 4550,
        "total_tokens": 6123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3551,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of an **NMOS transistor** (\\(M_1\\)) in a **common-gate** configuration, combined with **voltage-series (shunt-derived, series-mixed) negative feedback**.\n\n- Input signal \\(v_\\text{in}\\) is applied to the **source**.\n- Output signal \\(v_\\text{out}\\) is taken from the **drain**.\n- Drain resistor \\(R_D\\) connects to the positive supply \\(V_{DD}\\).\n- Resistive divider \\(R_1\\)-\\(R_2\\) samples the output voltage and applies the feedback signal\n  \\[\n  v_F = \\beta v_\\text{out}, \\qquad \\beta = \\frac{R_2}{R_1+R_2}\n  \\]\n  to the **gate**.\n\n### Small-Signal Voltage Gain\nIgnoring channel-length modulation (\\(r_o\\to\\infty\\)) and body effect, KCL at the drain node and the MOSFET law \\(i_d=g_m v_{gs}\\) yield\n\\[\nA_v = \\frac{v_\\text{out}}{v_\\text{in}} = \\frac{g_m}{g_m\\beta + \\dfrac{1}{R_D}+\\dfrac{1}{R_1+R_2}}.\n\\]\nWhen the loop gain is large (\\(g_m\\beta\\gg 1/R_D+1/(R_1+R_2)\\)),\n\\[\nA_v\\;\\approx\\;\\frac{1}{\\beta}=1+\\frac{R_1}{R_2}.\n\\]\n(The same limiting value is obtained by the ideal feedback relation \\(v_{gs}\\approx0\\Rightarrow v_G\\approx v_\\text{in}\\).)\n\n### Input Resistance\n\\[\nR_\\text{in}=\\frac{v_\\text{in}}{i_\\text{in}}=\\frac{\\beta}{G}+\\frac{1}{g_m},\\qquad G=\\frac{1}{R_D}+\\frac{1}{R_1+R_2}.\n\\]\n(The feedback raises the inherently low common-gate resistance \\(1/g_m\\) by the factor \\(1+T\\).)\n\n### Output Resistance\nVoltage sampling reduces the output resistance seen by a load:\n\\[\nR_\\text{out}=\\frac{1}{G(1+T)}=\\frac{1}{g_m\\beta+G}.\n\\]\n\n### DC Bias Considerations\nA practical bias point must keep \\(M_1\\) in saturation with a healthy over-drive:\n\\[\nV_{GS}=V_\\text{th}+V_{OV}=\\beta V_\\text{OUT}-V_\\text{IN}.\n\\]\nConsequently the closed-loop transfer characteristic contains a DC offset of \\(V_{GS}/\\beta\\).  Enhancement-mode devices therefore require a positive gate-source bias; a depletion-mode FET (or a level-shift) can be used if a true \\(V_{GS}\\approx0\\) operating point is desired.\n\n### Feedback Summary\n| Quantity            | Sampling / Mixing | Effect of Feedback      |\n|---------------------|-------------------|-------------------------|\n| Output voltage      | Shunt             | Stabilizes \\(A_v\\to1/\\beta\\) |\n| Input voltage       | Series            | Raises \\(R_\\text{in}\\)  |\n| Loop gain \\(T\\)     | –                 | \\(T=g_m\\beta/G\\)        |\n\nThe topology is therefore a classic **series-shunt feedback amplifier** realized with a single common-gate MOSFET.",
        "format": "markdown",
        "sha256": "e9361edf30705b3c00491388bc3313726db081baf819eb9113274db74153cd95"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative-feedback operation. Its closed-loop gain expression is equivalent to the golden result; the additional discussion does not undermine the essential analysis.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1573,
        "output_tokens": 4566,
        "total_tokens": 6139,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3806,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1573,
        "output_tokens": 4566,
        "total_tokens": 6139,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3806,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-gate (CG) amplifier** with **series-shunt negative feedback** applied via the resistive divider \\(R_1\\)-\\(R_2\\).\n\n### DC Biasing\n- \\(M_1\\) is an NMOS transistor.\n- The gate bias voltage is derived from the output via the unloaded divider:\n  \\[\n  V_G = V_F = \\frac{R_2}{R_1 + R_2} V_{\\text{out}}\n  \\]\n- Source is signal-driven (\\(V_S = V_{\\text{in}}\\)), so\n  \\[\n  V_{GS} = V_F - V_{\\text{in}}.\n  \\]\n- Drain current sets the DC output:\n  \\[\n  V_{\\text{out}} = V_{DD} - I_D R_D\n  \\]\n  (with \\(I_D\\) determined by the usual square-law expression once \\(V_{GS}\\) and device parameters are known). The feedback loop stabilizes \\(I_D\\) (and thus the operating point) against process/temperature variations.\n\n### Small-Signal Voltage Gain\nAssume \\(M_1\\) remains in saturation and channel-length modulation is neglected (\\(\\lambda = 0\\)).\n\n- Feedback factor:\n  \\[\n  \\beta = \\frac{R_2}{R_1 + R_2} \\quad \\Rightarrow \\quad v_g = \\beta v_{\\text{out}}.\n  \\]\n- Gate-source voltage:\n  \\[\n  v_{gs} = v_g - v_{\\text{in}} = \\beta v_{\\text{out}} - v_{\\text{in}}.\n  \\]\n- Controlled drain current:\n  \\[\n  i_d = g_m v_{gs} = g_m(\\beta v_{\\text{out}} - v_{\\text{in}}).\n  \\]\n- Effective load at the drain node (feedback network loads the output):\n  \\[\n  R_L = R_D \\parallel (R_1 + R_2).\n  \\]\n- Output voltage:\n  \\[\n  v_{\\text{out}} = -i_d R_L.\n  \\]\n\nSubstitute \\(i_d\\):\n\\[\nv_{\\text{out}} = -g_m(\\beta v_{\\text{out}} - v_{\\text{in}})R_L\n\\]\n\\[\nv_{\\text{out}} + g_m\\beta R_L\\, v_{\\text{out}} = g_m R_L\\, v_{\\text{in}}\n\\]\n\\[\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_L}{1 + g_m\\beta R_L}.\n\\]\n\n**Observations**\n- The open-loop CG gain is \\(+g_m R_L\\) (non-inverting).\n- Loop gain \\(T = g_m\\beta R_L\\) produces negative feedback, desensitizing the closed-loop gain.\n- For \\(T\\gg 1\\),\n  \\[\n  A_v \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}.\n  \\]\n- Input resistance is low (\\(\\approx 1/g_m\\) modified by feedback); output resistance is reduced by the factor \\((1+T)\\).\n\nThis topology is therefore a non-inverting voltage amplifier whose gain is set by the ratio of the feedback resistors when the loop gain is large.",
        "format": "markdown",
        "sha256": "04cdc893ba7f8c5f3816249f0b18747264bc2d6ae0da84af28c3191eedb34834"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven input, output-divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain. This meets the full-credit rule.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1573,
        "output_tokens": 2894,
        "total_tokens": 4467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2124,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1573,
        "output_tokens": 2894,
        "total_tokens": 4467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2124,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is an **NMOS source follower** (common-drain amplifier) with an active current-source load.\n\n**Topology identification:**\n- Transistor \\(M_1\\) is an NMOS device with its **drain** connected to \\(V_{DD}\\), **gate** driven by the input signal \\(V_{\\text{in}}\\), and **source** connected to the output node \\(V_{\\text{out}}\\).\n- Transistor \\(M_2\\) is an NMOS device with its **gate** biased by a DC voltage \\(V_b\\), **source** grounded, and **drain** tied to \\(V_{\\text{out}}\\). Thus, \\(M_2\\) operates as a current sink that sets the bias current of \\(M_1\\).\n\n**DC operating point:**\nThe bias current is established by \\(M_2\\):\n\\[\nI_D = \\frac{1}{2}\\mu_n C_{\\text{ox}}\\left(\\frac{W}{L}\\right)_2(V_b-V_{TH2})^2(1+\\lambda_2 V_{DS2})\n\\]\n(assuming forward-active/saturation operation). The same current flows through \\(M_1\\), which fixes \\(V_{GS1}\\) according to the square-law equation of \\(M_1\\). Consequently the DC output level is\n\\[\nV_{\\text{out}} = V_{\\text{in}} - V_{GS1}.\n\\]\n\n**Small-signal behavior:**\n- The circuit is a **voltage buffer**: gain is positive and slightly less than unity, input resistance is very high (gate of \\(M_1\\)), and output resistance is low.\n- Neglecting body effect, the voltage gain is\n\\[\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1}(r_{o1}\\parallel r_{o2})}{1+g_{m1}(r_{o1}\\parallel r_{o2})}.\n\\]\n- When body effect is present (\\(g_{mb1}>0\\)) the expression becomes\n\\[\nA_v = \\frac{(g_{m1}+g_{mb1})(r_{o1}\\parallel r_{o2})}{1+(g_{m1}+g_{mb1})(r_{o1}\\parallel r_{o2})}.\n\\]\n- The output resistance (gate of \\(M_1\\) AC-grounded) is\n\\[\nR_{\\text{out}} \\approx \\frac{1}{g_{m1}}\\parallel r_{o1}\\parallel r_{o2}\\approx\\frac{1}{g_{m1}}.\n\\]\n\nIn summary, the stage provides impedance transformation with near-unity voltage gain and is commonly used as a buffer.",
        "format": "markdown",
        "sha256": "fee40d6c4de1b0d6e9c705c812b2f4a70c6dca2ad978ca1a55d32273eae71d79"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as its current-source load and gives the positive, near-unity gain conclusion, satisfying the golden full-credit rule. The optional body-effect and output-resistance refinements are imperfect but do not overturn the essential answer.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1261,
        "output_tokens": 6178,
        "total_tokens": 7439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5573,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1261,
        "output_tokens": 6178,
        "total_tokens": 7439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5573,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two NMOS transistors and is a **source follower** (common-drain amplifier) with active current-source biasing.\n\n**Topology**\n- \\(M_1\\) is the input/driver device, connected in common-drain configuration:\n  - Drain tied to \\(V_{DD}\\)\n  - Gate is the input terminal (\\(V_{\\text{in}}\\))\n  - Source is the output terminal (\\(V_{\\text{out}}\\))\n- \\(M_2\\) is a current-source load (bias transistor):\n  - Gate held at a DC bias voltage \\(V_b\\)\n  - Source grounded\n  - Drain tied to the source of \\(M_1\\) (i.e., to \\(V_{\\text{out}}\\))\n\n**DC Operating Point**\n- \\(M_2\\) is biased in saturation by the fixed gate voltage \\(V_b\\) and sets a constant bias current\n  \\[\n  I_D = \\frac{1}{2}\\mu_n C_{\\text{ox}}\\left(\\frac{W}{L}\\right)_2(V_b - V_{\\text{TH2}})^2\n  \\]\n  (neglecting channel-length modulation).\n- The same current flows through \\(M_1\\). Consequently the gate-source voltage of \\(M_1\\) settles to the value required to support \\(I_D\\):\n  \\[\n  V_{\\text{GS1}} = V_{\\text{TH1}} + \\sqrt{\\frac{2I_D}{\\mu_n C_{\\text{ox}}(W/L)_1}}.\n  \\]\n- The large-signal input-output relationship is therefore\n  \\[\n  V_{\\text{out}} = V_{\\text{in}} - V_{\\text{GS1}}.\n  \\]\n  Because \\(I_D\\) is constant, \\(V_{\\text{GS1}}\\) is (to first order) constant, so \\(V_{\\text{out}}\\) follows \\(V_{\\text{in}}\\) with a simple DC level shift.\n\n**Small-Signal Behavior**\n- The voltage gain is\n  \\[\n  A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}} \\approx 1\n  \\]\n  (body effect \\(g_{mb1}\\) and the finite output conductances slightly reduce the gain below unity).\n- Input resistance is essentially infinite (gate of \\(M_1\\)).\n- Output resistance is low:\n  \\[\n  R_{\\text{out}} = \\frac{1}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}} \\approx \\frac{1}{g_{m1}}.\n  \\]\n\n**Function & Applications**\nThe circuit is a unity-gain buffer that provides\n- large input impedance,\n- low output impedance,\n- a well-defined DC level shift,\n- the ability to drive resistive or capacitive loads while isolating the preceding stage.\n\nIt is widely used as a voltage buffer, level shifter, or output stage in analog CMOS design.",
        "format": "markdown",
        "sha256": "2bd6bfc257293a75de51af5c85427384eec76ed05575be8602c8a65531c560de"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current-source load, and gives a positive gain slightly below unity with body effect and finite output conductances.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1261,
        "output_tokens": 5341,
        "total_tokens": 6602,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4658,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1261,
        "output_tokens": 5341,
        "total_tokens": 6602,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4658,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two NMOS transistors, \\(M_1\\) and \\(M_2\\).\n\n**Topology**\n- \\(M_1\\) has its drain tied to \\(V_{DD}\\), gate driven by the signal \\(V_{\\text{in}}\\), and source connected to the output node \\(V_{\\text{out}}\\). This is the **common-drain** (source-follower) configuration.\n- \\(M_2\\) has its source grounded, gate held at a DC bias voltage \\(V_b\\), and drain tied to \\(V_{\\text{out}}\\). Provided \\(M_2\\) remains in saturation, it behaves as a DC current source that biases \\(M_1\\).\n\nThe overall circuit is therefore an **NMOS source follower with an active current-source load**.\n\n**Large-signal (DC) behavior**\nThe bias current is set by \\(M_2\\):\n\\[\nI_D = \\frac{1}{2}\\mu_n C_{\\rm ox}\\left(\\frac{W}{L}\\right)_2(V_b-V_{TH2})^2\n\\]\n(neglecting \\(\\lambda\\)).  \nThe same current flows through \\(M_1\\), fixing its gate-source voltage:\n\\[\nV_{GS1}=V_{TH1}+\\sqrt{\\frac{2I_D}{\\mu_n C_{\\rm ox}(W/L)_1}}.\n\\]\nConsequently the output sits a constant level shift below the input:\n\\[\nV_{\\rm out}=V_{\\rm in}-V_{GS1}.\n\\]\n\n**Small-signal behavior**\nWith the gate of \\(M_2\\) AC-grounded, the small-signal resistance seen at the output node is \\(r_{o2}\\).  \nIncluding body effect on \\(M_1\\) (normally present because the source is not at body potential), the voltage gain is\n\\[\nA_v=\\frac{v_{\\rm out}}{v_{\\rm in}}=\\frac{(g_{m1}+g_{mb1})(r_{o1}\\parallel r_{o2})}{1+(g_{m1}+g_{mb1})(r_{o1}\\parallel r_{o2})}\\approx 1\n\\]\nwhen \\(g_m r_o\\gg 1\\).\n\nThe output resistance (driving point resistance at \\(V_{\\rm out}\\)) is\n\\[\nR_{\\rm out}=\\frac{1}{g_{m1}+g_{mb1}}\\parallel r_{o2}\\approx\\frac{1}{g_{m1}+g_{mb1}}.\n\\]\nInput resistance is essentially infinite (open gate of \\(M_1\\)).\n\n**Function**\nThe stage is a unity-gain voltage buffer: it provides a low output impedance, a high input impedance, and a DC level shift of one \\(V_{GS}\\).",
        "format": "markdown",
        "sha256": "8c9f45b89e96a2fe3cc70f9adfd24c8bff678e2f81f546a604f3ca87b66cb68e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, with a positive near-unity gain. The body-effect gain expression and output-resistance approximation are imperfect, but the golden full-credit rule accepts this core conclusion.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1261,
        "output_tokens": 3808,
        "total_tokens": 5069,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3196,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1261,
        "output_tokens": 3808,
        "total_tokens": 5069,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3196,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** (NOT gate).\n\n**Circuit topology:**\n- \\(M_1\\): NMOS transistor  \n  - Gate \\(\\to V_\\text{in}\\)  \n  - Source \\(\\to\\) GND  \n  - Drain \\(\\to V_\\text{out}\\)\n- \\(M_2\\): PMOS transistor  \n  - Gate \\(\\to V_\\text{in}\\)  \n  - Source \\(\\to V_{DD}\\)  \n  - Drain \\(\\to V_\\text{out}\\)\n\n**Operation:**\n- When \\(V_\\text{in} = 0\\) (logic low):  \n  \\(M_1\\) is OFF, \\(M_2\\) is ON \\(\\to V_\\text{out} = V_{DD}\\) (logic high).\n- When \\(V_\\text{in} = V_{DD}\\) (logic high):  \n  \\(M_1\\) is ON, \\(M_2\\) is OFF \\(\\to V_\\text{out} = 0\\) (logic low).\n\nThe circuit therefore performs logical inversion with rail-to-rail output swing and (ideally) zero static power dissipation.",
        "format": "markdown",
        "sha256": "c6596ffc8d87329fcb9fbeb29f45370b81fb2b0f4d14e523689535e8a329335e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and their complementary operation; the omitted analog analysis is not required.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 474,
        "output_tokens": 671,
        "total_tokens": 1145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 432,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 474,
        "output_tokens": 671,
        "total_tokens": 1145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 432,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** (NOT gate).\n\n### Circuit Topology\n- **\\(M_1\\)**: NMOS transistor  \n  - Gate \\(\\leftarrow V_{\\text{in}}\\)  \n  - Source \\(\\leftarrow\\) GND  \n  - Drain \\(\\leftarrow V_{\\text{out}}\\)\n\n- **\\(M_2\\)**: PMOS transistor  \n  - Gate \\(\\leftarrow V_{\\text{in}}\\)  \n  - Source \\(\\leftarrow V_{DD}\\)  \n  - Drain \\(\\leftarrow V_{\\text{out}}\\)\n\nBoth transistors share the same gate input (\\(V_{\\text{in}}\\)) and the same drain node (\\(V_{\\text{out}}\\)). This is the standard complementary MOS logic inverter.\n\n### Operating Regions & Behavior\n\n| \\(V_{\\text{in}}\\) | \\(M_1\\) (NMOS)     | \\(M_2\\) (PMOS)     | \\(V_{\\text{out}}\\) | Logic Function |\n|-------------------|--------------------|--------------------|--------------------|----------------|\n| \\(0\\) (LOW)       | OFF (\\(V_{GS}<V_{tn}\\)) | ON  (\\(V_{SG}>|V_{tp}|\\)) | \\(V_{DD}\\) (HIGH) | \\(1\\) |\n| \\(V_{DD}\\) (HIGH) | ON  (\\(V_{GS}>V_{tn}\\)) | OFF (\\(V_{SG}<|V_{tp}|\\)) | \\(0\\) (LOW)       | \\(0\\) |\n\n- **Low input** (\\(V_{\\text{in}}=0\\)):  \n  PMOS is strongly on and charges \\(V_{\\text{out}}\\) to \\(V_{DD}\\). NMOS is off, so there is no path to ground.\n\n- **High input** (\\(V_{\\text{in}}=V_{DD}\\)):  \n  NMOS is strongly on and discharges \\(V_{\\text{out}}\\) to \\(0\\). PMOS is off, so there is no path to \\(V_{DD}\\).\n\n### Key Properties\n- **Full rail-to-rail output** swing (\\(0\\) to \\(V_{DD}\\)).\n- **Virtually zero static power** dissipation (only one transistor is on in either steady state; no DC path from \\(V_{DD}\\) to GND).\n- **High noise margins** and sharp voltage transfer characteristic (VTC) around the switching threshold  \n  \\[\n  V_M \\approx \\frac{V_{DD}}{2}\n  \\]\n  (when the transistors are ratioed such that \\(\\mu_n C_{ox}(W/L)_n \\approx \\mu_p C_{ox}(W/L)_p\\)).\n- Dynamic power is dominated by charging/discharging the load capacitance: \\(P_{\\text{dyn}}=C_L V_{DD}^2 f\\).\n\n### Summary\nThe circuit implements the Boolean function  \n\\[\nV_{\\text{out}} = \\overline{V_{\\text{in}}}\n\\]  \nand is the fundamental building block of static CMOS logic.",
        "format": "markdown",
        "sha256": "dc48bd137d3508d7d7ba994a922bf847800b8668920ca6858f5fc99be182d9ed"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down, PMOS pull-up, and complementary operation. The optional analysis does not contradict the inverter’s operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 474,
        "output_tokens": 989,
        "total_tokens": 1463,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 364,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 474,
        "output_tokens": 989,
        "total_tokens": 1463,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 364,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** (NOT gate).\n\n### Circuit Topology\n- **\\(M_1\\)**: NMOS transistor  \n  - Gate \\(\\to V_\\text{in}\\)  \n  - Source \\(\\to\\) GND  \n  - Drain \\(\\to V_\\text{out}\\)\n\n- **\\(M_2\\)**: PMOS transistor  \n  - Gate \\(\\to V_\\text{in}\\)  \n  - Source \\(\\to V_{DD}\\)  \n  - Drain \\(\\to V_\\text{out}\\)\n\nThe gates of \\(M_1\\) and \\(M_2\\) are tied together (common input), and the drains are tied together (common output).\n\n### DC Operating Regions & Logic Function\n| \\(V_\\text{in}\\) | \\(M_1\\) (NMOS) | \\(M_2\\) (PMOS) | \\(V_\\text{out}\\) | Logic |\n|-----------------|----------------|----------------|------------------|-------|\n| \\(0\\) (LOW)     | OFF            | ON             | \\(V_{DD}\\) (HIGH)| 1     |\n| \\(V_{DD}\\) (HIGH)| ON           | OFF            | \\(0\\) (LOW)      | 0     |\n\n- **When \\(V_\\text{in} = 0\\)**:  \n  \\(V_{GS1} = 0 < V_{tn}\\) \\(\\Rightarrow M_1\\) cutoff.  \n  \\(V_{SG2} = V_{DD} > |V_{tp}|\\) \\(\\Rightarrow M_2\\) linear (triode).  \n  \\(V_\\text{out}\\) is charged to \\(V_{DD}\\) through the low-resistance PMOS channel.\n\n- **When \\(V_\\text{in} = V_{DD}\\)**:  \n  \\(V_{GS1} = V_{DD} > V_{tn}\\) \\(\\Rightarrow M_1\\) linear.  \n  \\(V_{SG2} = 0 < |V_{tp}|\\) \\(\\Rightarrow M_2\\) cutoff.  \n  \\(V_\\text{out}\\) is discharged to GND through the low-resistance NMOS channel.\n\nThus the circuit realizes the Boolean function\n\\[\nV_\\text{out} = \\overline{V_\\text{in}}.\n\\]\n\n### Key Properties\n- **Rail-to-rail output** swing (\\(0\\) to \\(V_{DD}\\)).\n- **Virtually zero static power** (only one transistor is on in either steady state; no DC path from \\(V_{DD}\\) to GND).\n- **High input impedance** (gates draw negligible DC current).\n- **Dynamic power** is dominated by charging/discharging the load capacitance: \\(P_\\text{dyn} = f\\,C_L V_{DD}^2\\).\n- Voltage-transfer characteristic (VTC) exhibits a sharp transition region around \\(V_\\text{in} = V_{DD}/2\\) (for matched \\(\\mu_n C_\\text{ox}(W/L)_n = \\mu_p C_\\text{ox}(W/L)_p\\)), giving high noise margins.\n\n### Small-Signal / Transient View\nDuring switching the circuit momentarily operates in saturation for both devices, producing a peak short-circuit current. The propagation delays are\n\\[\nt_{PHL} \\approx \\frac{C_L V_{DD}}{k_n(V_{DD}-V_{tn})^2},\\qquad\nt_{PLH} \\approx \\frac{C_L V_{DD}}{k_p(V_{DD}-|V_{tp}|)^2}.\n\\]\n\n**Summary**: The schematic is the standard complementary MOS inverter—the fundamental building block of static CMOS logic.",
        "format": "markdown",
        "sha256": "c9769b9f819c8279ef5e385863668c6f776f44a1586ccc2a5eee3f260ff2019f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down, PMOS pull-up, shared input, and shared output. The operating behavior is consistent with the inverter; optional extra analysis does not contradict its operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 474,
        "output_tokens": 1225,
        "total_tokens": 1699,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 474,
        "output_tokens": 1225,
        "total_tokens": 1699,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** (NOT gate), consisting of:\n- **M1**: PMOS transistor (pull-up)\n- **M2**: NMOS transistor (pull-down)\n\n**Connections:**\n- Gates of M1 and M2 tied together as input \\(V_{\\text{in}}\\)\n- Source of M1 connected to \\(V_{DD}\\)\n- Source of M2 connected to ground\n- Drains of M1 and M2 tied together as output \\(V_{\\text{out}}\\)\n\n**Operation:**\n\n| \\(V_{\\text{in}}\\) | M1 (PMOS) | M2 (NMOS) | \\(V_{\\text{out}}\\) |\n|-------------------|-----------|-----------|---------------------|\n| Low (0)           | ON        | OFF       | High (\\(V_{DD}\\))  |\n| High (\\(V_{DD}\\)) | OFF       | ON        | Low (0)            |\n\n**Key characteristics:**\n- Full-rail output swing (\\(0\\) to \\(V_{DD}\\))\n- Extremely high static noise margins\n- Near-zero static power dissipation (only dynamic/switching power)\n- High input impedance (voltage-controlled)\n- Output resistance is low in both logic states",
        "format": "markdown",
        "sha256": "a0d8441bd351119cd56f6cdce0272d9927f5aa47d197a9818a5b1f8b2bcc2b63"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer identifies M1 as PMOS and analyzes the circuit as an ordinary complementary CMOS inverter. Both devices are NMOS, so this violates the task’s non-negotiable scoring gate.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 487,
        "output_tokens": 768,
        "total_tokens": 1255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 512,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 487,
        "output_tokens": 768,
        "total_tokens": 1255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 512,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** (NOT gate).\n\n- **\\(M_1\\)**: PMOS transistor  \n- **\\(M_2\\)**: NMOS transistor  \n\n**Operation:**\n- Both gates are driven by \\(V_\\text{in}\\).\n- Drains are tied together to form \\(V_\\text{out}\\).\n- \\(M_1\\) source \\(\\to V_{DD}\\), \\(M_2\\) source \\(\\to\\) GND.\n\n| \\(V_\\text{in}\\) | \\(M_1\\) (PMOS) | \\(M_2\\) (NMOS) | \\(V_\\text{out}\\) |\n|-----------------|----------------|----------------|------------------|\n| Low (\\(0\\))     | ON             | OFF            | \\(V_{DD}\\) (high)|\n| High (\\(V_{DD}\\)) | OFF          | ON             | \\(0\\) (low)      |\n\nThis yields the classic inverting DC transfer characteristic of a CMOS logic inverter.",
        "format": "markdown",
        "sha256": "0a71edabf231edecb9a3194252b28955d2672801fa2e0da4eabb617f4d13132a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as an ordinary CMOS inverter. The figure has two NMOS devices, so this violates the non-negotiable scoring gate.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 487,
        "output_tokens": 774,
        "total_tokens": 1261,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 570,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 487,
        "output_tokens": 774,
        "total_tokens": 1261,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 570,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter**.\n\n- **M1** is a PMOS transistor with its source tied to \\(V_{DD}\\).\n- **M2** is an NMOS transistor with its source tied to ground.\n- The gates of both transistors are connected together to the input \\(V_{\\text{in}}\\).\n- The drains of both transistors are connected together to form the output \\(V_{\\text{out}}\\).\n\n**Operation:**\n- When \\(V_{\\text{in}}\\) is low (\\(\\approx 0\\)): M1 is ON and M2 is OFF \\(\\rightarrow V_{\\text{out}} = V_{DD}\\) (logic high).\n- When \\(V_{\\text{in}}\\) is high (\\(\\approx V_{DD}\\)): M1 is OFF and M2 is ON \\(\\rightarrow V_{\\text{out}} = 0\\) (logic low).\n\nThis yields the classic inverting DC transfer characteristic of a CMOS inverter.",
        "format": "markdown",
        "sha256": "97d84b84d8b8a327169a2413e6bc498e1319aa7c4dfa0b73b6f0a04cbcbd918a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as PMOS and analyzes the circuit as a conventional CMOS inverter; the golden solution requires both devices to be identified as NMOS.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 487,
        "output_tokens": 1052,
        "total_tokens": 1539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 852,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 487,
        "output_tokens": 1052,
        "total_tokens": 1539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 852,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit is a **ratioed logic inverter** (specifically, an NMOS driver with a diode-connected PMOS active load).\n\n### Circuit Topology\n- **\\(M_1\\)**: Enhancement-mode NMOS transistor\n  - Gate driven by input \\(V_{\\text{in}}\\)\n  - Source tied to ground\n  - Drain tied to output node \\(V_{\\text{out}}\\)\n- **\\(M_2\\)**: Enhancement-mode PMOS transistor\n  - Source tied to \\(V_{DD}\\)\n  - Gate shorted to drain (diode-connected)\n  - Drain tied to output node \\(V_{\\text{out}}\\)\n\n\\(M_2\\) therefore operates as a two-terminal pull-up device whose \\(I\\)-\\(V\\) characteristic is set by the condition \\(V_{SG} = V_{SD}\\).\n\n### DC Operating Behavior\n- **High input** (\\(V_{\\text{in}} \\ge V_{TN}\\)):  \n  \\(M_1\\) is on and sinks current. The circuit is ratioed, so the low output level \\(V_{OL}\\) is determined by the relative strengths \\((W/L)_1/(W/L)_2\\) and lies above \\(0\\,\\text{V}\\).\n\n- **Low input** (\\(V_{\\text{in}} < V_{TN}\\)):  \n  \\(M_1\\) is off. Diode-connected \\(M_2\\) charges the output until  \n  \\[\n  V_{\\text{out}} = V_{DD}-|V_{TP}|\n  \\]\n  (i.e., \\(M_2\\) turns off when \\(V_{SG}=|V_{TP}|\\)). Consequently the high output level is  \n  \\[\n  V_{OH}=V_{DD}-|V_{TP}|\n  \\]\n  rather than a full-rail \\(V_{DD}\\).\n\n### Key Properties\n- Inverting voltage-transfer characteristic.\n- Static power dissipation exists for \\(V_{\\text{in}}=V_{OH}\\) (both devices conduct).\n- Output swing is reduced on the high side by one PMOS threshold.\n- Noise margins and switching threshold are set by the sizing ratio of \\(M_1\\) to \\(M_2\\).\n\nThe same topology can also be viewed as a common-source amplifier with a diode-connected PMOS load when biased in the transition region; the small-signal voltage gain is then modest (\\(\\approx -g_{m1}/g_{m2}\\)).",
        "format": "markdown",
        "sha256": "f15a3621a610fb1486a98162991a7970c5a25b4f55fb0a15c98fa050e6bedf96"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies the common-source NMOS stage with a diode-connected PMOS load and gives the correct inverting gain, approximately −gm1/gm2. The golden solution's full-credit rule applies; the large-signal discussion is optional.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 841,
        "output_tokens": 2616,
        "total_tokens": 3457,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2089,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 841,
        "output_tokens": 2616,
        "total_tokens": 3457,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2089,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit is a **digital inverter** (specifically, an NMOS driver with a diode-connected PMOS active load).\n\n### Circuit Topology\n- **\\(M_1\\)**: Enhancement-mode NMOS transistor (driver/pull-down device)\n  - Gate terminal driven by input \\(V_{\\text{in}}\\)\n  - Source terminal connected to ground\n  - Drain terminal connected to output node \\(V_{\\text{out}}\\)\n- **\\(M_2\\)**: Enhancement-mode PMOS transistor (load/pull-up device)\n  - Source terminal connected to \\(V_{DD}\\)\n  - Gate terminal **shorted to drain** terminal (diode-connected configuration)\n  - Drain terminal connected to output node \\(V_{\\text{out}}\\)\n\n### DC Operating Principle\nBecause \\(M_2\\) is diode-connected (\\(V_{SG} = V_{SD}\\)):\n- It is **always in saturation** when conducting (for \\(V_{SD} \\geq |V_{tp}|\\)).\n- It acts as a nonlinear pull-up load device.\n\n**Case 1: \\(V_{\\text{in}}\\) logic-low** (\\(V_{\\text{in}} < V_{tn}\\))\n- \\(M_1\\) is **cut off** (\\(I_D = 0\\)).\n- \\(M_2\\) charges the output capacitance until it turns off, yielding  \n  \\[\n  V_{OH} = V_{DD} - |V_{tp}|\n  \\]\n- Output is logic-high (incomplete rail, level-shifted by one \\(|V_{tp}|\\)).\n\n**Case 2: \\(V_{\\text{in}}\\) logic-high** (\\(V_{\\text{in}} > V_{tn}\\))\n- \\(M_1\\) turns **on** and pulls down \\(V_{\\text{out}}\\).\n- Steady-state \\(V_{OL}\\) is set by current continuity (\\(I_{D,M1} = I_{D,M2}\\)) and the relative transconductance parameters (\\(\\mu C_{ox} W/L\\)) of the two devices.\n- \\(M_1\\) typically operates in the linear region while \\(M_2\\) remains saturated.\n- Output is logic-low.\n\n### Overall Behavior\nThe circuit realizes the logic function\n\\[\nV_{\\text{out}} = \\overline{V_{\\text{in}}}\n\\]\n(i.e., a **logic inverter**).  \n\nIt is non-ideal compared with a complementary CMOS inverter:\n- \\(V_{OH}\\) does not reach full \\(V_{DD}\\),\n- Static DC current flows for a high input,\n- Noise margins and power consumption are inferior to CMOS,\n- The voltage-transfer characteristic (VTC) is set by the ratio of the two device strengths.\n\nThis topology is sometimes called a **saturated-PMOS-load NMOS inverter**.",
        "format": "markdown",
        "sha256": "62d69fc435dc1de183289070cae91a38dca80623876a081518b3801a3aa7d331"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the NMOS common-source stage with a diode-connected PMOS load and its inverting behavior, but misses the central small-signal gain analysis (approximately −gm1/gm2, with output-resistance corrections) and instead focuses on digital-inverter operation.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 841,
        "output_tokens": 3435,
        "total_tokens": 4276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 841,
        "output_tokens": 3435,
        "total_tokens": 4276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit is a **ratioed logic inverter** consisting of:\n- An **NMOS driver transistor** (\\(M_1\\))\n- A **diode-connected PMOS load transistor** (\\(M_2\\))\n\n## Circuit Configuration\n\n- **\\(M_1\\) (NMOS)**:  \n  Gate terminal driven by \\(V_{\\text{in}}\\),  \n  source terminal connected to ground,  \n  drain terminal connected to \\(V_{\\text{out}}\\).\n\n- **\\(M_2\\) (PMOS)**:  \n  Source terminal connected to \\(V_{DD}\\),  \n  gate and drain terminals **shorted together** (diode-connected) and tied to \\(V_{\\text{out}}\\).\n\nThis is **not** a complementary CMOS inverter (the gates of \\(M_1\\) and \\(M_2\\) are **not** connected together).\n\n## DC Operation / Voltage Transfer Behavior\n\n**Case 1: \\(V_{\\text{in}}\\) = logic 0** (\\(V_{\\text{in}} < V_{TN}\\))  \n- \\(M_1\\) is **cut off** (\\(I_D = 0\\)).  \n- The diode-connected PMOS \\(M_2\\) charges the output capacitance until it turns off.  \n- This occurs when  \n  \\[\n  |V_{GS2}| = |V_{TP}| \\implies V_{\\text{out}} = V_{OH} = V_{DD} - |V_{TP}|.\n  \\]\n- Result: \\(V_{\\text{out}}\\) is logic **high**.\n\n**Case 2: \\(V_{\\text{in}}\\) = logic 1** (\\(V_{\\text{in}} > V_{TN}\\))  \n- \\(M_1\\) turns **on** and conducts.  \n- \\(M_2\\) remains on (diode-connected devices operate in saturation).  \n- A DC current path exists from \\(V_{DD}\\) to ground.  \n- The circuit is **ratioed**: the low output level \\(V_{OL}\\) is set by the relative drive strengths \\((W/L)_1 / (W/L)_2\\).  \n  \\[\n  V_{OL} > 0 \\quad (\\text{typically a few hundred mV, depending on sizing}).\n  \\]\n- Result: \\(V_{\\text{out}}\\) is logic **low**.\n\n## Summary of Logic Function\n\n\\[\nV_{\\text{out}} =\n\\begin{cases}\nV_{DD}-|V_{TP}| & \\text{when }V_{\\text{in}}\\text{ is low}\\\\\nV_{OL} & \\text{when }V_{\\text{in}}\\text{ is high}\n\\end{cases}\n\\]\n\nThe circuit therefore realizes the **logic inversion** function\n\\[\nV_{\\text{out}} = \\overline{V_{\\text{in}}}.\n\\]\n\n## Additional Remarks\n\n- Because a constant current can flow when the output is low, **static power dissipation** is non-zero (unlike complementary CMOS).  \n- Noise margins are asymmetric and depend on the transistor sizing ratio.  \n- The topology is historically important as an early form of MOS logic and is still occasionally used for special-purpose level-shifting or active-load circuits.",
        "format": "markdown",
        "sha256": "8138f1ae1ee6157e8a6b32df124ea8bf7cf1b86878b33185b2087af646810c21"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-source NMOS with a diode-connected PMOS load and its inverting behavior, but omits the key small-signal gain analysis (approximately -gm1/gm2, with the appropriate output resistances if included).",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 841,
        "output_tokens": 5262,
        "total_tokens": 6103,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 841,
        "output_tokens": 5262,
        "total_tokens": 6103,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit consists of two MOSFET transistors, labeled \\(M_1\\) and \\(M_2\\).\n\n**Device types and DC connections:**\n- Transistor \\(M_2\\) is a **PMOS** device. Its source terminal is tied to the positive supply \\(V_{DD}\\), its gate terminal is driven by the input voltage \\(V_{\\text{in}}\\), and its drain terminal drives the output node \\(V_{\\text{out}}\\).\n- Transistor \\(M_1\\) is an **NMOS** device. Both its gate and source terminals are tied directly to ground (\\(0\\,\\text{V}\\)), while its drain terminal is tied to the output node \\(V_{\\text{out}}\\).\n\n**Operating regions and circuit behavior:**\n- For the NMOS device \\(M_1\\), \\(V_{GS1} = 0\\). Assuming a standard enhancement-mode device (\\(V_{TN} > 0\\)), \\(M_1\\) is **permanently in cutoff** (\\(I_{D1} = 0\\)) and does not provide any pull-down path from \\(V_{\\text{out}}\\) to ground.\n- The PMOS device \\(M_2\\) operates as a voltage-controlled switch:\n  - When \\(V_{\\text{in}}\\) is logic-low (\\(\\approx 0\\,\\text{V}\\)), \\(V_{SG2} \\approx V_{DD} > |V_{TP}|\\), so \\(M_2\\) is **on** (triode/saturation). It pulls \\(V_{\\text{out}}\\) up to \\(V_{DD}\\).\n  - When \\(V_{\\text{in}}\\) is logic-high (\\(\\approx V_{DD}\\)), \\(V_{SG2} \\approx 0 < |V_{TP}|\\), so \\(M_2\\) is **off**. With \\(M_1\\) also off, there is **no DC path** to either rail.\n\n**Overall function:**\nThe circuit can drive \\(V_{\\text{out}}\\) to a solid logic-high level but cannot drive \\(V_{\\text{out}}\\) low. When \\(M_2\\) turns off, \\(V_{\\text{out}}\\) is left in a high-impedance (floating) state. Consequently, the network is **not** a complete logic inverter (or any restoring logic gate); it functions only as a conditional pull-up device.\n\n**DC voltage transfer summary:**\n\n| \\(V_{\\text{in}}\\) | State of \\(M_2\\) | State of \\(M_1\\) | \\(V_{\\text{out}}\\)      |\n|-------------------|------------------|------------------|--------------------------|\n| Low (\\(\\approx 0\\)) | On              | Cutoff           | \\(V_{DD}\\)              |\n| High (\\(\\approx V_{DD}\\)) | Off         | Cutoff           | Floating (high-Z)       |",
        "format": "markdown",
        "sha256": "8fe62f244ea538ac6a0f8d862fa185b6784343956b1897006cc008cf43c27816"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS. It is a diode-connected PMOS load, so the circuit is a gm/gm amplifier rather than a PMOS pull-up with a floating output.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1639,
        "output_tokens": 6326,
        "total_tokens": 7965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5727,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1639,
        "output_tokens": 6326,
        "total_tokens": 7965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5727,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of **two PMOS transistors**.\n\n**Device identification (from symbol arrows):**\n- The arrows point **inward**, identifying both \\(M_1\\) and \\(M_2\\) as **P-channel** devices.\n- For \\(M_2\\), the arrow is associated with the upper terminal \\(\\rightarrow\\) **source** at \\(V_{DD}\\).\n- For \\(M_1\\), the arrow is associated with the upper terminal \\(\\rightarrow\\) **source** at \\(V_{\\text{out}}\\).\n\n**DC connections:**\n- \\(M_2\\): source \\(\\to V_{DD}\\), gate \\(\\to V_{\\text{in}}\\), drain \\(\\to V_{\\text{out}}\\)\n- \\(M_1\\): source \\(\\to V_{\\text{out}}\\), gate \\(\\to 0\\), drain \\(\\to 0\\)  \n  (i.e., **diode-connected** PMOS)\n\n**Circuit function:**\nThis is a **PMOS common-source (CS) amplifier** with a **diode-connected PMOS active load**.\n\n- \\(M_2\\) is the driver (input) device.\n- \\(M_1\\) implements a nonlinear pull-down load to ground.\n\n**Large-signal behavior (qualitative VTC):**\n- **Low \\(V_{\\text{in}}\\)** (\\(\\approx 0\\)): \\(M_2\\) is strongly ON. \\(V_{\\text{out}}\\) rises to a high value (near \\(V_{DD}\\)) set by current balance between \\(M_2\\) (typically triode) and \\(M_1\\) (saturation).\n- **High \\(V_{\\text{in}}\\)** (\\(\\approx V_{DD}\\)): \\(M_2\\) is OFF. \\(M_1\\) discharges the output until it turns off, leaving  \n  \\[\n  V_{\\text{out}} \\approx |V_{TP}|\n  \\]\n- **Intermediate \\(V_{\\text{in}}\\)**: Both devices can be in saturation. If the transistors are matched (\\(k_p, |V_{TP}|\\) identical), current equality yields the simple relationship\n  \\[\n  V_{\\text{out}} = V_{DD} - V_{\\text{in}}\n  \\]\n  (voltage gain \\(= -1\\)) inside the region where the saturation conditions hold:\n  \\[\n  \\frac{V_{DD}-|V_{TP}|}{2} \\le V_{\\text{in}} \\le V_{DD}-|V_{TP}|.\n  \\]\n\nThe circuit is therefore an **inverting** stage (analog amplifier or ratioed PMOS logic inverter) whose exact transfer characteristic depends on the relative sizing of \\(M_1\\) and \\(M_2\\) and on \\(V_{DD}/|V_{TP}|\\).",
        "format": "markdown",
        "sha256": "c6c5dda8a8c2d43206ab3d881f21d3205c66a9f3e01384f29cb4fac8152c654e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, M2 as the common-source input device, and M1 as a diode-connected PMOS load. Its current-balance result for matched devices gives the expected inverting gain of −1; the additional pull-down framing is allowed.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1639,
        "output_tokens": 7418,
        "total_tokens": 9057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1639,
        "output_tokens": 7418,
        "total_tokens": 9057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit consists of two MOSFET devices (\\(M_1\\) and \\(M_2\\)) with the following connections:\n\n- **\\(M_2\\)**: Source terminal connected to the positive supply \\(V_{DD}\\), gate terminal driven by the input signal \\(V_{\\text{in}}\\), and drain terminal connected to the output node \\(V_{\\text{out}}\\).\n- **\\(M_1\\)**: Drain terminal connected to \\(V_{\\text{out}}\\), with **both** the gate and source terminals hard-wired to ground (i.e., \\(V_{GS1} = 0\\)).\n\n**Device types (inferred from standard schematic conventions and circuit functionality):**\n- The source arrow directions indicate that \\(M_2\\) is a **p-channel (PMOS)** device and \\(M_1\\) is an **n-channel (NMOS)** device.\n- For the circuit to have a DC path to ground (and thus be a static circuit), \\(M_1\\) must be a **depletion-mode** NMOS (which has a conductive channel at \\(V_{GS} = 0\\) and can sink a current \\(I_{DSS}\\)). \\(M_2\\) is an enhancement-mode PMOS.\n\n**Circuit operation (logic inverter):**\n\nThis is a **ratioed-logic inverter** (PMOS driver + depletion-NMOS load):\n\n- **Case \\(V_{\\text{in}} = \\text{LOW} \\approx 0\\)**:  \n  The source-gate voltage of \\(M_2\\) is \\(V_{SG2} \\approx V_{DD}\\). Since this greatly exceeds \\(|V_{tp}|\\), \\(M_2\\) turns **on** strongly and charges \\(V_{\\text{out}}\\) toward \\(V_{DD}\\). Although the depletion load \\(M_1\\) is also on, proper device sizing (\\((W/L)_2 \\gg (W/L)_1\\)) ensures the output high level \\(V_{OH} \\approx V_{DD}\\).\n\n- **Case \\(V_{\\text{in}} = \\text{HIGH} \\approx V_{DD}\\)**:  \n  \\(V_{SG2} = 0\\), so the enhancement PMOS \\(M_2\\) is **cut off**. The depletion-mode NMOS \\(M_1\\) (still on with \\(V_{GS1} = 0\\)) discharges \\(V_{\\text{out}}\\) all the way to ground. Thus \\(V_{OL} = 0\\).\n\n**Summary of behavior**  \n\\[\nV_{\\text{out}} =\n\\begin{cases}\nV_{DD} & \\text{when }V_{\\text{in}}\\text{ is low}\\\\\n0 & \\text{when }V_{\\text{in}}\\text{ is high}\n\\end{cases}\n\\]\nThe circuit therefore realizes the **Boolean inversion** function. Because the load device is always conducting, the low output level and the static power dissipation are determined by the relative transconductance ratio of \\(M_1\\) and \\(M_2\\) (ratioed logic). \n\n(Note: If \\(M_1\\) were instead an enhancement-mode device it would be permanently cut off, leaving \\(V_{\\text{out}}\\) floating when \\(M_2\\) is off; that configuration is not useful as a static gate and is inconsistent with the drawn schematic.)",
        "format": "markdown",
        "sha256": "f164a715f934a37c9d4ea44f937edacb313c947678d8014bd27def926caaf6d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as a depletion-mode NMOS and concludes the circuit is a logic inverter. In fact, both devices are PMOS; M1 is a diode-connected load, and the circuit is a gm/gm amplifier with gain approximately -gm2/gm1.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1639,
        "output_tokens": 7330,
        "total_tokens": 8969,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6623,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1639,
        "output_tokens": 7330,
        "total_tokens": 8969,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6623,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **PMOS cascode** current source. Both gates are at AC ground. The output resistance \\(R_\\text{out}\\) is found by applying a test voltage \\(v_t\\) at the drain of \\(M_1\\) and calculating \\(R_\\text{out}=v_t/i_t\\).\n\n**Small-signal analysis** (neglecting body effect):\n\n- \\(M_2\\) has \\(v_{gs2}=0\\), so it contributes only its output resistance: the resistance from node \\(X\\) to AC ground is \\(r_{o2}\\). Thus,\n  \\[\n  v_x = i_t r_{o2}.\n  \\]\n\n- For \\(M_1\\),\n  \\[\n  v_{gs1} = -v_x, \\quad v_{ds1} = v_t - v_x.\n  \\]\n  The test current is\n  \\[\n  i_t = g_{m1}v_{gs1} + \\frac{v_{ds1}}{r_{o1}} = -g_{m1}v_x + \\frac{v_t-v_x}{r_{o1}}.\n  \\]\n\n- Substitute \\(v_x=i_t r_{o2}\\):\n  \\[\n  i_t = -g_{m1}(i_t r_{o2}) + \\frac{v_t}{r_{o1}} - \\frac{i_t r_{o2}}{r_{o1}}.\n  \\]\n  Collecting terms in \\(i_t\\),\n  \\[\n  i_t\\bigl(1 + g_{m1}r_{o2} + \\tfrac{r_{o2}}{r_{o1}}\\bigr) = \\frac{v_t}{r_{o1}},\n  \\]\n  \\[\n  R_\\text{out} = \\frac{v_t}{i_t} = r_{o1} + r_{o2} + g_{m1}r_{o1}r_{o2}.\n  \\]\n\n**Approximate expression** (since typically \\(g_{m}r_{o}\\gg 1\\)):\n\\[\nR_\\text{out}\\approx g_{m1}r_{o1}r_{o2}.\n\\]\n\nFinal answer: \\(r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\\)",
        "format": "markdown",
        "sha256": "91a634a9b37e24a8db51836371b23e818ff2278e44569b984391d59f5c250fc9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode with M1 as the cascode device and gives the full output-resistance expression and its approximation. Neglecting body effect is allowed.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 2465,
        "output_tokens": 4169,
        "total_tokens": 6634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3630,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 2465,
        "output_tokens": 4169,
        "total_tokens": 6634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3630,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **PMOS cascode** current source. Transistor \\(M_2\\) is the current-source device (source at \\(V_{DD}\\)) and \\(M_1\\) is the cascode device (drain at the output node).\n\n**Small-signal analysis** (gates at AC ground, \\(V_{DD}\\) at AC ground):\n\n- Apply a test voltage \\(v_t\\) at the output and calculate the resulting test current \\(i_t\\).\n- The resistance looking into the drain of \\(M_2\\) (with \\(v_{gs2}=0\\)) is simply \\(r_{o2}\\). Thus the voltage at the intermediate node \\(X\\) is\n  \\[\n  v_x = i_t r_{o2}.\n  \\]\n- For \\(M_1\\),\n  \\[\n  v_{gs1} = -v_x,\n  \\]\n  and (neglecting body effect)\n  \\[\n  i_t = g_{m1}(-v_x) + \\frac{v_t - v_x}{r_{o1}}.\n  \\]\n- Substitute \\(v_x = i_t r_{o2}\\) and solve for the ratio \\(v_t/i_t\\):\n  \\[\n  R_{\\mathrm{out}} = \\frac{v_t}{i_t} = r_{o1} + \\bigl(1 + g_{m1} r_{o1}\\bigr)r_{o2}.\n  \\]\n\n(If body effect on \\(M_1\\) is included, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).)\n\n**Final answer:** \\(R_{\\rm out}=r_{o1}+(1+g_{m1}r_{o1})r_{o2}\\)",
        "format": "markdown",
        "sha256": "53cdf11fc9cf8ef430f51348f5072763fd8c26fa3c2287a3c1daecb41ea62661"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS topology and M1 as the cascode device, and gives the correct output-resistance expression with body effect omitted as allowed.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2465,
        "output_tokens": 3931,
        "total_tokens": 6396,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3535,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2465,
        "output_tokens": 3931,
        "total_tokens": 6396,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3535,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **PMOS cascode** current source. The output resistance \\(R_{\\rm out}\\) is found by applying a test voltage at the drain of \\(M_1\\) and computing the resulting current (gates \\(V_{b1}\\) and \\(V_{b2}\\) are AC grounds; \\(V_{DD}\\) is an AC ground).\n\n- Looking into the drain of \\(M_2\\) (source and gate grounded) yields simply \\(r_{o2}\\). Thus the resistance from node \\(X\\) to AC ground is \\(R_S = r_{o2}\\).\n- \\(M_1\\) is therefore a common-gate device whose source is degenerated by \\(R_S = r_{o2}\\).\n\nThe exact resistance seen at the drain of a MOSFET with source degeneration \\(R_S\\) (body effect neglected) is\n\\[\nR_{\\rm out} = r_{o1} + R_S + g_{m1} r_{o1} R_S.\n\\]\nSubstituting \\(R_S = r_{o2}\\) produces\n\\[\nR_{\\rm out} = r_{o1} + r_{o2} + g_{m1} r_{o1} r_{o2}.\n\\]\n\n(If body effect on \\(M_1\\) is included the factor \\(g_{m1}\\) is replaced by \\(g_{m1}+g_{mb1}\\).)\n\nFinal answer: \\(r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\\)",
        "format": "markdown",
        "sha256": "3b0dee0bdcfa6f15ecebea20a9981f5269dd5ede1d84961f7625de549ed86d47"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the PMOS common-gate cascode and gives the required output-resistance expression; body effect is appropriately noted as optional.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 2465,
        "output_tokens": 2976,
        "total_tokens": 5441,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2646,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 2465,
        "output_tokens": 2976,
        "total_tokens": 5441,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2646,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows a **PMOS cascode** current source (with \\(M_2\\) as the cascode device).\n\n**Saturation condition for \\(M_2\\)** (PMOS):\n\\[\nV_{SD2} \\ge V_{SG2} - |V_{TP2}|\n\\]\nSince \\(V_S = V_{DD}\\) and \\(V_G = V_{b2}\\),\n\\[\nV_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{TP2}|\n\\]\nwhich simplifies to\n\\[\nV_X \\le V_{b2} + |V_{TP2}|.\n\\]\n\n**How to ensure this:**\n- The voltage \\(V_X\\) is set by the \\(V_{SG}\\) of \\(M_1\\):\n  \\[\n  V_X = V_{b1} + V_{SG1} = V_{b1} + |V_{TP1}| + V_{OV1}.\n  \\]\n- Choose the DC bias \\(V_{b1}\\) low enough that the above expression for \\(V_X\\) satisfies the inequality \\(V_X \\le V_{b2} + |V_{TP2}|\\).\n\n(This is typically done while also keeping \\(M_1\\) itself in saturation and maximizing output swing.)\n\nFinal answer: \\(V_X \\le V_{b2}+|V_{TP}|\\) (via choice of \\(V_{b1}\\))",
        "format": "markdown",
        "sha256": "e4c99b7b7473dfe61ded2daf32639b15a898b89aa2faaad004308d2050ab8e56"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives M2’s PMOS saturation condition and relates VX to Vb1 through M1, yielding the required bias constraint. This meets the full-credit rule.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2379,
        "output_tokens": 2090,
        "total_tokens": 4469,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2379,
        "output_tokens": 2090,
        "total_tokens": 4469,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The devices shown are PMOS transistors (sourced from \\(V_{DD}\\)) in a cascode arrangement.\n\n**Saturation condition for \\(M_2\\)**:  \n\\[\nV_{SD2} \\geq V_{SG2} - |V_{tp}|\n\\]  \nSubstituting the terminal voltages  \n\\[\nV_{DD} - V_X \\geq (V_{DD} - V_{b2}) - |V_{tp}|\n\\]  \nyields the requirement  \n\\[\nV_X \\leq V_{b2} + |V_{tp}|.\n\\]\n\nThis is enforced in practice by the choice of the gate bias \\(V_{b1}\\) (which sets \\(V_X = V_{b1} + V_{SG1}\\)) so that the inequality above remains satisfied for the intended bias current.",
        "format": "markdown",
        "sha256": "dfd8f945b6b0a409c2dcaee2fa869a0d713d76fadeddf1272da1a96082f5f474"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, and relates VX to Vb1, which makes the saturation requirement a condition on Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2379,
        "output_tokens": 1909,
        "total_tokens": 4288,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1738,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2379,
        "output_tokens": 1909,
        "total_tokens": 4288,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1738,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The devices shown are **PMOS** transistors (sources oriented toward \\(V_{DD}\\)).\n\n**Saturation condition for \\(M_2\\)**:  \n\\[\nV_{SD2} \\ge V_{OV2}\n\\]\nwhere \\(V_{OV2} = V_{SG2} - |V_{tp}|\\).\n\nSubstituting the terminal voltages of \\(M_2\\):\n- \\(V_S = V_{DD}\\)\n- \\(V_G = V_{b2}\\)\n- \\(V_D = V_X\\)\n\ngives\n\\[\nV_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{tp}|.\n\\]\n\nSimplifying yields the requirement\n\\[\nV_X \\le V_{b2} + |V_{tp}|.\n\\]\n\n**How to enforce the condition**:  \nThe voltage \\(V_X\\) is set by the gate-source voltage of \\(M_1\\):\n\\[\nV_X = V_{b1} + V_{SG1}(I_D).\n\\]\nTherefore \\(V_{b1}\\) must be chosen low enough that the inequality above remains satisfied (i.e., \\(M_2\\) is kept out of the triode region).\n\nFinal answer: \\(V_X \\le V_{b2}+|V_{tp}|\\) (via low enough \\(V_{b1}\\))",
        "format": "markdown",
        "sha256": "309a0841485aa9d7787ddb7d3501a56aeb3458313993466298567b283a6d4fb6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and relates VX to Vb1 through M1’s source-gate voltage, thereby identifying Vb1 as the control.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2379,
        "output_tokens": 3555,
        "total_tokens": 5934,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3253,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2379,
        "output_tokens": 3555,
        "total_tokens": 5934,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3253,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **cascode amplifier** (common-source stage with cascode transistor) using NMOS devices.\n\n### Topology\n- **\\(M_1\\)**: Input (common-source) transistor  \n  - Gate: \\(v_{\\text{in}}\\)  \n  - Source: grounded  \n  - Drain: intermediate node \\(X\\)\n\n- **\\(M_2\\)**: Cascode transistor  \n  - Gate: DC bias \\(V_{b1}\\)  \n  - Source: node \\(X\\)  \n  - Drain: output node \\(v_{\\text{out}}\\)\n\n- **Load**: Ideal current source \\(I_1\\) connected from \\(V_{DD}\\) to \\(v_{\\text{out}}\\)\n\n- Both transistors are assumed biased in **saturation**.\n\n### DC Biasing\n- \\(I_1\\) sets the DC bias current through the \\(M_2\\)-\\(M_1\\) stack.  \n- \\(V_{b1}\\) is chosen so that \\(M_2\\) remains in saturation for the expected signal swing at \\(v_{\\text{out}}\\) (typically \\(V_{b1} \\approx V_{GS2} + V_{OV1}\\)).  \n- The voltage at node \\(X\\) is set by the \\(V_{GS}\\) of \\(M_2\\):  \n  \\[\n  V_X = V_{b1} - V_{GS2}\n  \\]\n- \\(M_1\\) operates with \\(V_{DS1} = V_X\\).\n\n### Small-Signal Operation\n- \\(v_{\\text{in}}\\) modulates the drain current of \\(M_1\\):  \n  \\[\n  i_{d1} = g_{m1} v_{\\text{in}}\n  \\]\n- \\(M_2\\) acts as a common-gate stage, forcing nearly all of \\(i_{d1}\\) to flow to the output (high impedance at the source of \\(M_2\\)).\n\n**Voltage gain** (ideal current-source load):  \nBecause the load impedance is infinite, the low-frequency gain is set by the output resistance of the cascode:  \n\\[\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} \\approx -g_{m1} R_{\\text{out}}\n\\]\nwhere\n\\[\nR_{\\text{out}} \\approx g_{m2} r_{o2} r_{o1}\n\\]\n(very high). In practice a finite load (e.g., PMOS cascode current source) is used and the gain becomes\n\\[\nA_v \\approx -g_{m1}(R_{\\text{out,n}} \\parallel R_{\\text{out,p}}).\n\\]\n\n### Key Properties\n| Parameter              | Expression / Behavior                          | Benefit of Cascode                  |\n|------------------------|------------------------------------------------|-------------------------------------|\n| Output resistance      | \\(\\approx g_{m2} r_{o2} r_{o1}\\)              | Greatly increased                   |\n| Input resistance       | \\(\\infty\\) (gate of \\(M_1\\))                  | Unchanged                           |\n| Gain                   | \\(-g_{m1} R_{\\text{out}}\\) (very large)       | Higher than simple CS stage         |\n| Input capacitance      | \\(C_{gs1} + C_{gd1}(1+|A_{v,X}|)\\)            | Miller effect reduced (node \\(X\\) has low gain) |\n| Bandwidth              | Improved vs. simple CS                        | Higher \\(f_T\\) utilization          |\n| Output swing           | Reduced by \\(V_{OV2}\\)                        | Trade-off for higher gain/\\(R_{\\text{out}}\\) |\n\n### Frequency Response (qualitative)\n- Dominant pole at the high-impedance output node.  \n- Non-dominant pole at the low-impedance node \\(X\\) (\\(\\approx g_{m2}/C_X\\)).  \n- The cascode improves the gain-bandwidth product relative to a simple common-source amplifier with the same current.\n\n### Summary\nThis is a classic **telescopic cascode** gain stage. It provides high voltage gain and high output impedance while partially mitigating the Miller effect at the input. The ideal current source \\(I_1\\) would be replaced in a real design by a PMOS cascode load to obtain a fully differential or single-ended high-gain amplifier.",
        "format": "markdown",
        "sha256": "aa52c96cba038679648d946f49738bb1fe7785466788f01ecefda32ecab2a95b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the accepted gain expression \\(A_v \\approx -g_{m1}R_{out}\\). This meets the golden solution’s full-credit rule; secondary claims about node X are overgeneralized.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1326,
        "output_tokens": 1566,
        "total_tokens": 2892,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 646,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1326,
        "output_tokens": 1566,
        "total_tokens": 2892,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 646,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **cascode common-source amplifier** (NMOS) with an ideal current-source load.\n\n## Topology\n- **\\(M_1\\)**: Common-source input device  \n  - Gate: \\(v_{\\text{in}}\\)  \n  - Source: ground  \n  - Drain: intermediate node \\(X\\)\n- **\\(M_2\\)**: Common-gate cascode device  \n  - Gate: DC bias \\(V_{b1}\\)  \n  - Source: node \\(X\\)  \n  - Drain: output node\n- **Load**: Ideal current source \\(I_1\\) connected from \\(V_{DD}\\) to the drain of \\(M_2\\)  \n- **Output**: Taken at the drain of \\(M_2\\) (\\(v_{\\text{out}}\\))\n\nBoth transistors are biased in saturation for proper amplification.\n\n## DC Operating Point\n- Bias current through the stack is set by \\(I_1\\):\n  \\[\n  I_{D1}=I_{D2}=I_1\n  \\]\n- Gate bias \\(V_{b1}\\) is chosen so that\n  \\[\n  V_{GS2}=V_{b1}-V_X>V_{TH2},\\qquad V_{DS2}=V_{\\text{out}}-V_X>V_{GS2}-V_{TH2}\n  \\]\n  (and likewise \\(M_1\\) remains in saturation).  \n- Node \\(X\\) sits at approximately \\(V_{b1}-V_{GS2}\\).\n\n## Small-Signal Analysis\n\n### Low-frequency voltage gain\nThe cascode raises the output resistance seen by the current source to\n\\[\nR_{\\text{out}}\\approx g_{m2}r_{o2}r_{o1}\n\\]\n(neglecting body effect).  \nHence the voltage gain is\n\\[\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\\approx -g_{m1}R_{\\text{out}}\\approx -g_{m1}g_{m2}r_{o1}r_{o2}.\n\\]\n(The exact expression including body effect and finite \\(r_o\\) of the current source can be obtained from the small-signal model, but the dominant term remains the same.)\n\n### Input resistance\n\\[\nR_{\\text{in}}=\\infty\\quad\\text{(gate of MOSFET)}.\n\\]\n\n### Output resistance\n\\[\nR_{\\text{out}}\\approx g_{m2}r_{o2}r_{o1}\n\\]\n(very high).\n\n### Intermediate node \\(X\\)\nThe resistance looking into the source of \\(M_2\\) is low (\\(\\approx 1/g_{m2}\\)), so the voltage swing at \\(X\\) is greatly attenuated:\n\\[\nv_x\\approx\\frac{v_{\\text{out}}}{g_{m2}r_{o2}}.\n\\]\nThis shielding is the origin of the cascode’s improved Miller effect and higher bandwidth relative to a simple common-source stage.\n\n## Key Properties\n- **High gain** (product of two intrinsic gains).  \n- **High output impedance** (useful for current steering or as a high-gain stage).  \n- **Reduced Miller multiplication** of \\(C_{gd1}\\) (gate-drain capacitance of \\(M_1\\) sees only the small swing at \\(X\\)).  \n- **Headroom cost**: two \\(V_{DSsat}\\) drops plus the compliance of \\(I_1\\), limiting the maximum output swing.\n\nThis topology is the core building block of telescopic and folded-cascode op-amps.",
        "format": "markdown",
        "sha256": "75ce214ce52a57c360c0db11ee19ea959c8753d37eda39261ee64f37cef65c25"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS, M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. The full-credit rule applies; the imprecision about node X does not change the score.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1326,
        "output_tokens": 1325,
        "total_tokens": 2651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 567,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1326,
        "output_tokens": 1325,
        "total_tokens": 2651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 567,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **cascode amplifier** (common-source stage with cascode transistor) using NMOS devices and an ideal current-source load.\n\n### Circuit Topology\n- **\\(M_1\\)**: Common-source input device. Gate driven by \\(v_{\\text{in}}\\), source grounded.\n- **\\(M_2\\)**: Cascode device. Gate biased by DC voltage \\(V_{b1}\\), source connected to drain of \\(M_1\\) (node \\(X\\)).\n- **\\(I_1\\)**: Ideal DC current source supplying bias current from \\(V_{DD}\\) to the drain of \\(M_2\\).\n- **Output**: Taken at the drain of \\(M_2\\) (\\(v_{\\text{out}}\\)).\n\n### DC Operating Point\n- \\(I_1\\) sets the bias current through the series combination of \\(M_1\\) and \\(M_2\\).\n- \\(V_{b1}\\) is chosen so that both transistors remain in saturation:\n  - \\(V_{GS2} = V_{b1} - V_X > V_{TH2}\\)\n  - \\(V_{DS2} = V_{\\text{out}} - V_X \\ge V_{GS2} - V_{TH2}\\) (overdrive)\n  - \\(V_{DS1} = V_X \\ge V_{GS1} - V_{TH1}\\)\n- Node \\(X\\) sits at approximately \\(V_{b1} - V_{GS2}\\).\n\n### Small-Signal Behavior\n- \\(M_1\\) converts \\(v_{\\text{in}}\\) into a current \\(g_{m1}v_{\\text{in}}\\).\n- \\(M_2\\) acts as a common-gate stage, presenting a low impedance (\\(\\approx 1/g_{m2}\\)) at node \\(X\\) and a high impedance at the output.\n- With an ideal current-source load, the output resistance is\n  \\[\n  R_{\\text{out}} \\approx g_{m2}r_{o2}r_{o1}\n  \\]\n  (neglecting body effect).\n- Voltage gain:\n  \\[\n  A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} \\approx -g_{m1}R_{\\text{out}} \\approx -g_{m1}(g_{m2}r_{o2}r_{o1}).\n  \\]\n- The cascode raises both gain and output impedance relative to a simple common-source stage while keeping the input pole essentially unchanged.\n\n### Key Properties\n- High gain, high output impedance.\n- Improved Miller effect (reduced input capacitance) because the drain of \\(M_1\\) is held at a low impedance.\n- Requires sufficient voltage headroom (\\(V_{DD}\\) must accommodate two overdrives plus the compliance of \\(I_1\\)).\n\nThis is the classic single-ended NMOS cascode gain stage.",
        "format": "markdown",
        "sha256": "d5aea85cbb1c58ae16bd7826fc09c942b9b13baf44b0dd9671a88a255eed256a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source input NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. The low-impedance-node claim is imprecise for an ideal current-source load, but the golden solution's full-credit rule applies.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1326,
        "output_tokens": 1095,
        "total_tokens": 2421,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 470,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1326,
        "output_tokens": 1095,
        "total_tokens": 2421,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 470,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a common-source MOSFET (\\(M_1\\)) stacked with a common-gate MOSFET (\\(M_2\\)) under a resistive load. This is the definition of a **cascode** topology.\n\n**Yes**",
        "format": "markdown",
        "sha256": "beee78d814bd6dbd539e21533f9b70b73a0fa8f492e45e68616cd4aaa19f42c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower, not a common-source stage, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1388,
        "output_tokens": 415,
        "total_tokens": 1803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 367,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1388,
        "output_tokens": 415,
        "total_tokens": 1803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 367,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two NMOS transistors in a stacked configuration:\n\n- **M1** is connected in a **common-source** topology (gate driven by \\(V_{in}\\), source grounded).\n- **M2** is connected in a **common-gate** topology (gate biased by the DC voltage \\(V_{b1}\\), source tied to the drain of M1, drain connected to the load \\(R_D\\)).\n\nThis series combination of a common-source stage followed by a common-gate stage is the definition of a **cascode** amplifier.\n\n**Answer:** Yes",
        "format": "markdown",
        "sha256": "2074dbee7dc0d4679fd5805c93bf01422617b28663a28650bc862ef9d7af376a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower with its drain grounded, not a common-source stage, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1388,
        "output_tokens": 397,
        "total_tokens": 1785,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 274,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1388,
        "output_tokens": 397,
        "total_tokens": 1785,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 274,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a common-source MOSFET (\\(M_1\\)) stacked with a common-gate MOSFET (\\(M_2\\)) whose gate is held at a fixed bias \\(V_{b1}\\).  \n\nThis is the definition of a **cascode** stage (CS + CG).  \n\n**Answer:** yes",
        "format": "markdown",
        "sha256": "5bb17b50d03e3f90f4e319a7a68cd29a1ee349fd272939da4c6908e36749a6fb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode: M1 is a PMOS source follower, not a common-source stage, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1388,
        "output_tokens": 381,
        "total_tokens": 1769,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 316,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1388,
        "output_tokens": 381,
        "total_tokens": 1769,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 316,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect arises in an inverting amplifier because the capacitance \\(C\\) appearing between input and output is multiplied by the factor \\((1-A_v)\\). When \\(|A_v|\\) is large this produces a greatly inflated effective input capacitance that degrades high-frequency response.\n\nIn a cascode the first transistor is loaded by the very low input impedance (\\(\\approx1/g_m\\)) of the common-base (or common-gate) second stage. Consequently the voltage gain that appears across the first device’s \\(C_{bc}\\) (or \\(C_{gd}\\)) is only \\(\\approx-1\\). The Miller multiplication factor is therefore only \\(\\approx2\\), not the large factor that would be obtained with a high-gain common-emitter (or common-source) stage. The overall voltage gain of the cascode is realized by the second stage, which does not itself suffer from Miller multiplication of its own feedback capacitance.\n\nThus the input capacitance of the cascode remains essentially free of the severe Miller enhancement that limits a simple common-emitter/common-source amplifier.\n\nFinal answer: Miller multiplication \\(\\approx2\\) (low gain across \\(C_{bc}/C_{gd}\\))",
        "format": "markdown",
        "sha256": "f123fbb894cc909abd23f6878ab9f0ae5bdaa5baeba2911dccb844ee49bada31"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance source/emitter node of the common-gate/base device, the resulting gain across the first transistor’s feedback capacitance of about −1, and the corresponding Miller factor of about 2. This explains why the effect is reduced, not eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 219,
        "output_tokens": 725,
        "total_tokens": 944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 477,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 219,
        "output_tokens": 725,
        "total_tokens": 944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 477,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect refers to the multiplication of the reverse transfer capacitance \\(C_\\mu\\) (e.g., \\(C_{bc}\\) or \\(C_{gd}\\)) in a common-emitter/source stage by the factor \\((1 - A_v)\\), where \\(A_v\\) is the stage's voltage gain. When \\(|A_v|\\) is large this produces a greatly increased effective input capacitance that degrades high-frequency performance.\n\nIn a cascode the CE/CS transistor is loaded by the very low input impedance (\\(\\approx 1/g_m\\)) of the following CB/CG transistor. Consequently the voltage gain of the first stage collapses to roughly \\(-1\\). The Miller multiplication factor therefore falls to only \\(\\approx 2\\), so the contribution of \\(C_\\mu\\) to the input capacitance remains modest. (The CB/CG device itself experiences no Miller multiplication because its control terminal is AC-grounded.)\n\nFinal answer: Miller mult. \\(\\approx2\\) (1st-stage \\(A_v\\approx-1\\))",
        "format": "markdown",
        "sha256": "fa1bbbcff703571f49b1a1bd885e2405074d5868483fe224b171797334226a47"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance node loading the input transistor and the resulting gain of roughly −1 across its reverse-transfer capacitance, giving a Miller factor near 2. The extra comment about the common-gate device is secondary.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 219,
        "output_tokens": 618,
        "total_tokens": 837,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 397,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 219,
        "output_tokens": 618,
        "total_tokens": 837,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 397,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect refers to the multiplication of the feedback capacitance \\(C_{cb}\\) (or \\(C_{gd}\\)) in a common-emitter/source stage by the factor \\((1-A_v)\\), where the voltage gain \\(A_v\\) is large and negative. This greatly inflates the effective input capacitance.\n\nIn a cascode the CE/CS device is loaded by the low impedance looking into the emitter/source of the following CB/CG device. The resulting voltage gain of the first stage is therefore only on the order of \\(-1\\) (or smaller). Consequently the Miller multiplication factor remains near unity, the input capacitance stays essentially equal to the intrinsic \\(C_{be}/C_{gs}+C_{cb}/C_{gd}\\), and the bandwidth penalty that normally accompanies high voltage gain is avoided. The large overall voltage gain of the cascode is produced by the CB/CG stage, which itself contributes no Miller multiplication at the amplifier input.\n\nFinal answer: Miller multiplication \\(\\approx1\\) (low \\(A_v\\) of CE/CS stage)",
        "format": "markdown",
        "sha256": "0cc50f783d55c194fbba3b67a9b6a93fa42fd1cea5e168a688740f44057472df"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the low-impedance cascode node and the resulting small gain across the input transistor’s feedback capacitance. However, it understates the remaining Miller multiplication: for a gain near −1, the factor is about 2, not near 1, so the capacitance is not essentially unmultiplied.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 219,
        "output_tokens": 714,
        "total_tokens": 933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 495,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 219,
        "output_tokens": 714,
        "total_tokens": 933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 495,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-gate (CG) amplifier** with an active current-source load.\n\n### Device Identification\n- **\\(M_1\\)**: PMOS transistor  \n  - Source tied to \\(V_{DD}\\)  \n  - Gate biased by DC voltage \\(V_{b2}\\)  \n  - Drain connected to the output node \\(V_{\\text{out}}\\)  \n  - Operates as a **constant current source** (active load) for \\(M_2\\).\n\n- **\\(M_2\\)**: NMOS transistor  \n  - Gate biased by DC voltage \\(V_{b1}\\)  \n  - Source is the signal input node \\(V_{\\text{in}}\\)  \n  - Drain connected to the output node \\(V_{\\text{out}}\\)  \n  - This is the **amplifying device** in the common-gate configuration.\n\n### Topology & Signal Path\n- Input signal is applied at the **source** of \\(M_2\\).\n- Gate of \\(M_2\\) is AC-grounded (fixed bias \\(V_{b1}\\)).\n- Output is taken at the **drain** of \\(M_2\\).\n- \\(M_1\\) provides the high-impedance load at the drain of \\(M_2\\).\n\nThis yields the classic common-gate stage (low input impedance, moderate-to-high output impedance, non-inverting voltage gain).\n\n### DC Operating Point\n- \\(V_{b1}\\) and \\(V_{b2}\\) are chosen so that both transistors remain in **saturation**.\n- Bias current is set by the PMOS current source \\(M_1\\) and flows through \\(M_2\\) into the source terminal (must be sunk by the input bias network).\n\n### Small-Signal Behavior (qualitative)\n- **Voltage gain**: \\(A_v = v_{\\text{out}}/v_{\\text{in}} > 0\\) (non-inverting)  \n  \\[\n  A_v \\approx +g_{m2}(r_{o1}\\parallel r_{o2})\n  \\]\n  (body effect and channel-length modulation can be included for a more accurate expression).\n\n- **Input impedance**: low  \n  \\[\n  R_{\\text{in}} \\approx \\frac{1}{g_{m2}}\n  \\]\n  (looking into the source of \\(M_2\\)).\n\n- **Output impedance**: high  \n  \\[\n  R_{\\text{out}} \\approx r_{o1}\\parallel r_{o2}\n  \\]\n\n### Typical Applications\n- Low-to-high impedance transformation  \n- Broadband amplifiers / cable drivers  \n- Input stage of cascode amplifiers  \n- Current buffers  \n\nThe circuit is the standard **common-gate amplifier with PMOS active load**.",
        "format": "markdown",
        "sha256": "e36051b9d38352879e96a4fbfa43ec7a85e57e7187d0fed00fad234941d7f661"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stage with a PMOS current-source load, places the input at M2’s source, identifies the bias voltages, and gives the non-inverting gain approximation and low input resistance. The simplified input-resistance estimate is acceptable under the full-credit rule.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1261,
        "output_tokens": 1964,
        "total_tokens": 3225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1379,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1261,
        "output_tokens": 1964,
        "total_tokens": 3225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1379,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-source (CS) amplifier** with an **active current-source load**.\n\n### Device Identification\n- **\\(M_1\\)**: PMOS transistor  \n  - Source tied to \\(V_{DD}\\)  \n  - Gate biased by DC voltage \\(V_{b2}\\)  \n  - Drain connected to the output node \\(V_{\\text{out}}\\)  \n  - Operates as a **constant current source** (active load) when biased in saturation.\n\n- **\\(M_2\\)**: NMOS transistor  \n  - Gate receives the input signal \\(V_{\\text{in}}\\)  \n  - Source biased by DC voltage \\(V_{b1}\\) (AC ground)  \n  - Drain connected to the output node \\(V_{\\text{out}}\\)  \n  - Operates as the **driver** (amplifying) device in the common-source configuration when biased in saturation.\n\n### DC Operating Point\n- \\(V_{b2}\\) sets the DC current \\(I_{D1} = I_{D2}\\) supplied by the PMOS load.  \n- \\(V_{b1}\\) sets the source potential of \\(M_2\\), which (together with the DC component of \\(V_{\\text{in}}\\)) establishes the gate-source voltage \\(V_{GS2}\\) and thus the operating point of \\(M_2\\).  \n- Both transistors must remain in **saturation** for proper amplifier operation:\n  - \\(M_1\\): \\(V_{SD1} \\ge |V_{OV1}|\\)\n  - \\(M_2\\): \\(V_{DS2} \\ge V_{OV2}\\)\n\n### Small-Signal Behavior\nWith \\(V_{b1}\\) and \\(V_{b2}\\) treated as AC grounds, the small-signal voltage gain is\n\n\\[\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m2}(r_{o1}\\parallel r_{o2})\n\\]\n\nwhere\n- \\(g_{m2}\\) = transconductance of \\(M_2\\),\n- \\(r_{o1}\\), \\(r_{o2}\\) = output resistances of \\(M_1\\) and \\(M_2\\), respectively.\n\nThe amplifier is **inverting** and provides high voltage gain set by the product of the driver transconductance and the parallel output resistance of the two transistors.\n\n### Summary\n| Role              | Device | Configuration          |\n|-------------------|--------|------------------------|\n| Driver            | \\(M_2\\) (NMOS) | Common-source         |\n| Active load       | \\(M_1\\) (PMOS) | Current source        |\n| Overall function  | –      | Inverting CS amplifier |",
        "format": "markdown",
        "sha256": "8413974f1a11a58aeabb8637fee0b888e3c03aa6f35449f138207b18e069c87e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at the gate of M2 and identifies a common-source stage, but the circuit is common-gate with Vin at M2’s source. Its gain polarity and input-terminal analysis are therefore wrong.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1261,
        "output_tokens": 1897,
        "total_tokens": 3158,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1325,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1261,
        "output_tokens": 1897,
        "total_tokens": 3158,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1325,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of an **NMOS common-gate (CG) amplifier** (\\(M_2\\)) with a **PMOS current-source active load** (\\(M_1\\)).\n\n### Device Identification & DC Biasing\n- **\\(M_1\\) (PMOS)**: Source tied to \\(V_{DD}\\), gate biased by DC voltage \\(V_{b2}\\), drain connected to the output node. This transistor operates as a DC current source (active load), setting the bias current \\(I_D\\) of the stage. For proper operation, \\(V_{b2}\\) is chosen so that \\(M_1\\) remains in saturation:\n  \\[\n  V_{SD1} \\ge |V_{OV1}| \\quad \\Rightarrow \\quad V_{out} \\le V_{DD} - |V_{OV1}|\n  \\]\n- **\\(M_2\\) (NMOS)**: Gate biased by DC voltage \\(V_{b1}\\), source is the signal input (\\(V_{in}\\)), drain is the signal output (\\(V_{out}\\)). This is the amplifying device in the **common-gate** configuration. \\(V_{b1}\\) sets the gate-source voltage (and thus \\(I_D\\)) once the source DC level is established (often by a preceding stage or bias network). For saturation:\n  \\[\n  V_{DS2} \\ge V_{OV2} \\quad \\Rightarrow \\quad V_{out} \\ge V_{in,DC} + V_{OV2}\n  \\]\n\nThe bias current is identical through both devices (\\(I_{D1} = I_{D2} = I_B\\)).\n\n### Small-Signal Operation\n- **Input**: Applied at the source of \\(M_2\\).\n- **Output**: Taken at the common drain node.\n- **Gate of \\(M_2\\)**: AC ground (held at fixed \\(V_{b1}\\)).\n\n**Key small-signal parameters** (assuming both FETs in saturation and neglecting body effect/channel-length modulation initially):\n- Transconductance of driver: \\(g_{m2}\\)\n- Output resistances: \\(r_{o1}\\) (of \\(M_1\\)), \\(r_{o2}\\) (of \\(M_2\\))\n\n#### Voltage Gain\nThe CG stage converts the input voltage into a current \\(i = g_{m2} v_{in}\\) that flows through the parallel combination of the two output resistances:\n\\[\nA_v = \\frac{v_{out}}{v_{in}} = g_{m2} (r_{o1} \\parallel r_{o2})\n\\]\n(The gain is **positive**, as expected for a common-gate amplifier.)\n\nIf body effect on \\(M_2\\) is included, \\(g_{m2}\\) is replaced by \\(g_{m2} + g_{mb2}\\).\n\n#### Input Resistance\nLooking into the source of \\(M_2\\) (with the drain loaded by \\(r_{o1}\\)):\n\\[\nR_{in} \\approx \\frac{1}{g_{m2}} \\parallel \\left( \\frac{r_{o2} + r_{o1}}{1 + g_{m2} r_{o2}} \\right) \\approx \\frac{1}{g_{m2}}\n\\]\n(low input impedance – classic CG property).\n\n#### Output Resistance\nLooking into the output node with the input source grounded (AC):\n\\[\nR_{out} = r_{o1} \\parallel \\left( r_{o2} + \\frac{1}{g_{m2}} \\right) \\approx r_{o1} \\parallel r_{o2}\n\\]\n\n### Frequency Response / Other Properties\n- The CG topology provides a **wide bandwidth** because the input capacitance does not suffer from Miller multiplication (the gate is at AC ground).\n- It is commonly used as a current buffer or as the input stage of a cascode amplifier.\n- The PMOS load increases available gain relative to a simple resistive load while consuming less voltage headroom than a resistor sized for the same gain.\n\n### Summary\n| Parameter       | Expression                          | Characteristic          |\n|-----------------|-------------------------------------|-------------------------|\n| Topology        | Common-gate + PMOS current source   |                         |\n| Voltage gain    | \\(+g_{m2}(r_{o1}\\parallel r_{o2})\\) | Moderate, non-inverting |\n| Input impedance | \\(\\approx 1/g_{m2}\\)                | Low                     |\n| Output impedance| \\(\\approx r_{o1}\\parallel r_{o2}\\)  | High                    |\n| Bandwidth       | High (no Miller effect)             |                         |\n\nThis is a classic building block in analog CMOS design (e.g., LNA input stages, cascode current mirrors, broadband amplifiers).",
        "format": "markdown",
        "sha256": "ba17b19b52ca63d63775c627a5120c28bb794c532fcecfb8993eef1c1a272b6f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, identifies the bias voltages, and gives the non-inverting gain and low input resistance. The simplified or imperfect detailed resistance expressions do not contradict the essential topology or gain mechanism.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1261,
        "output_tokens": 2406,
        "total_tokens": 3667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1379,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1261,
        "output_tokens": 2406,
        "total_tokens": 3667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1379,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a small-signal model consisting of two MOSFETs (\\(M_1\\) and \\(M_2\\)) and five capacitors. The MOSFETs contribute only dependent sources and conductances.\n\nThere are only **two** nodes in the circuit whose voltages are not fixed by sources:\n- The gate node of \\(M_1\\) (call it node \\(G\\))\n- The common drain node of \\(M_1\\)/\\(M_2\\) (call it node \\(V_{\\text{out}}\\))\n\n(The gates of both devices and the source of \\(M_1\\) are at AC ground.)\n\nThe five capacitors therefore appear as follows:\n- \\(C_{GS}\\) from \\(G\\) to ground\n- \\(C_{GD}\\) from \\(G\\) to \\(V_{\\text{out}}\\)\n- \\(C_{DB}\\), \\(C_{GD2}\\) and \\(C_{DB2}\\) all from \\(V_{\\text{out}}\\) to ground\n\nThese produce only **two independent capacitor voltages** (the three capacitor voltages that can be defined around the loop \\(C_{GS}\\)-\\(C_{GD}\\)-\\(C_{DB}\\) are linearly dependent). Consequently the network is of order 2 and the transfer function \\(V_{\\text{out}}(s)/V_{\\text{in}}(s)\\) has **two poles**.\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "df15123f4f298f6b7ba976b34cf6e36a35d22ba48e03908be590a978501315b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies two poles and assigns the capacitors to the gate and output nodes, but incorrectly says the gate of M1 is at AC ground, contradicting its own identification of that gate as an independent node.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1692,
        "output_tokens": 3991,
        "total_tokens": 5683,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3703,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1692,
        "output_tokens": 3991,
        "total_tokens": 5683,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3703,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is the small-signal model of a common-source amplifier (with active load). The independent circuit nodes are:\n\n- The gate node of \\(M_1\\) (connected to \\(V_\\mathrm{in}\\) through \\(R_S\\))\n- The output node \\(V_\\mathrm{out}\\) (drains of \\(M_1\\) and \\(M_2\\))\n\nAll other terminals are at AC ground. The five capacitors appearing in the figure reduce to three equivalent capacitances associated with these nodes:\n\n- \\(C_\\mathrm{GS}\\) from the gate node to ground\n- \\(C_\\mathrm{GD}\\) from the gate node to the output node\n- \\(C_\\mathrm{L} = C_\\mathrm{DB} + C_\\mathrm{DB2} + C_\\mathrm{GD2}\\) from the output node to ground\n\n(The last three capacitors simply appear in parallel.)\n\nWith two nodes, the KCL equations in the \\(s\\)-domain yield a \\(2 \\times 2\\) admittance matrix whose determinant is a quadratic polynomial in \\(s\\). Consequently the transfer function \\(V_\\mathrm{out}(s)/V_\\mathrm{in}(s)\\) is of order 2 and the circuit has **two poles**.\n\n(The same conclusion follows from energy storage: only two capacitor voltages can be given independent initial conditions; the voltage on \\(C_\\mathrm{GD}\\) is completely determined by the two node voltages.)\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "5d2d850ea31590aeb05860d578f4836bbd1fccf6717c0af90860bf568a747597"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent nodes, assigns the capacitors to the gate and output nodes, and concludes the circuit has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1692,
        "output_tokens": 4143,
        "total_tokens": 5835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3833,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1692,
        "output_tokens": 4143,
        "total_tokens": 5835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3833,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is the small-signal model of a common-source amplifier (with active load). It contains **two** non-ground nodes:\n\n- The gate node of \\(M_1\\) (denoted \\(V_g\\))\n- The drain/output node (denoted \\(V_{\\text{out}}\\))\n\nThe capacitors in the circuit are:\n- \\(C_{GS}\\) from \\(V_g\\) to ground\n- \\(C_{GD}\\) from \\(V_g\\) to \\(V_{\\text{out}}\\)\n- \\(C_{DB}\\), \\(C_{DB2}\\), and \\(C_{GD2}\\) all from \\(V_{\\text{out}}\\) to ground (i.e., in parallel)\n\nThis yields a system of two coupled nodal equations in the frequency domain (from KCL at \\(V_g\\) and at \\(V_{\\text{out}}\\)). The determinant of the resulting \\(2 \\times 2\\) admittance matrix is a quadratic polynomial in \\(s\\).\n\nThus, the transfer function \\(V_{\\text{out}}/V_{\\text{in}}\\) has a denominator of degree 2 (i.e., **two poles**). (The bridging capacitor \\(C_{GD}\\) produces a right-half-plane zero but does not increase the number of poles.)\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "e00565f1f2c92b08790f8ab6f512ac87813581627adbe25ac7cf0559076b2e04"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two nodes and assigns the capacitors to them, supporting the conclusion of two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1692,
        "output_tokens": 5899,
        "total_tokens": 7591,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5622,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1692,
        "output_tokens": 5899,
        "total_tokens": 7591,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5622,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **resistive-load NMOS inverter** in which the pull-down path consists of two series-connected enhancement-mode NMOS transistors (\\(M_1\\) and \\(M_2\\)) that share a common gate driven by \\(V_\\text{in}\\).\n\n### Circuit Topology\n- Load: resistor \\(R_D\\) tied between \\(V_{DD}\\) and the output node \\(V_\\text{out}\\).\n- Driver:  \n  – \\(M_2\\) (upper device): drain at \\(V_\\text{out}\\), source at intermediate node \\(V_x\\), gate at \\(V_\\text{in}\\).  \n  – \\(M_1\\) (lower device): drain at \\(V_x\\), source at ground, gate at \\(V_\\text{in}\\).  \n- Both devices are \\(N\\)-channel MOSFETs (enhancement-mode). In a typical IC realization the bulk terminals are grounded, so \\(M_2\\) experiences body effect.\n\n### Qualitative Operation\n| \\(V_\\text{in}\\) | State of \\(M_1,M_2\\) | \\(V_\\text{out}\\) |\n|----------------|----------------------|------------------|\n| Low (\\(\\approx 0\\)) | both cut off | \\(V_{DD}\\) (logic 1) |\n| High (\\(\\approx V_{DD}\\)) | both inverted | \\(V_{OL}\\) (logic 0) |\n\n- **Cut-off region** (\\(V_\\text{in}<V_t\\)): no path to ground exists, so \\(I_D=0\\) and \\(V_\\text{out}=V_{DD}\\).\n- **Conduction region** (\\(V_\\text{in}>V_t\\)): a current \\(I_D=(V_{DD}-V_\\text{out})/R_D\\) flows through the series combination. The output low level \\(V_{OL}\\) is set by the on-resistance of the stack relative to \\(R_D\\).\n\n### Intermediate-Node Behavior\nBecause the transistors are stacked,\n\\[\nV_{GS1}=V_\\text{in},\\qquad V_{GS2}=V_\\text{in}-V_x.\n\\]\nConsequently \\(M_2\\) turns on only after \\(V_x\\) has fallen below \\(V_\\text{in}-V_t\\). Body effect further raises the threshold of \\(M_2\\):\n\\[\nV_{t2}=V_{t0}+\\gamma\\bigl(\\sqrt{|V_x+2\\phi_F|}-\\sqrt{|2\\phi_F|}\\bigr).\n\\]\nThe net result is that the series combination behaves approximately like a single device whose effective length is \\(2L\\) (if the transistors are identical), but the equivalence is only first-order; body effect and the different \\(V_{DS}\\) values make the \\(I\\)-\\(V\\) characteristic slightly different.\n\n### DC Transfer Characteristic (VTC)\nThe VTC is obtained by equating the load-line current to the series MOSFET current while tracking the operating region of each device:\n\n1. **Both off** – \\(V_\\text{out}=V_{DD}\\).\n2. **\\(M_1\\) saturation, \\(M_2\\) saturation or linear** – occurs for moderate \\(V_\\text{in}\\).  \n   Saturation conditions:  \n   \\[\n   V_x\\ge V_\\text{in}-V_{t1},\\qquad V_\\text{out}\\ge V_\\text{in}-V_{t2}.\n   \\]\n3. **Both linear** – deep in the logic-0 region (\\(V_\\text{in}\\approx V_{DD}\\), \\(V_\\text{out}\\) small).\n\nSolving the resulting transcendental equations (usually numerically or graphically) yields the classic inverter VTC with a sharp transition region whose midpoint voltage \\(V_M\\) and noise margins depend on the ratio \\(k_nR_D\\) and on the body-effect factor of \\(M_2\\).\n\n### Small-Signal View (analog bias point)\nIf the circuit is biased in the middle of the transition region with both devices saturated, it functions as a common-source amplifier whose transconductance is that of the series stack\n\\[\ng_{m,\\text{eq}}\\approx\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}+g_{mb2}}\n\\]\nand whose output resistance is \\(R_D\\parallel r_{o1}\\parallel r_{o2}\\). The voltage gain is therefore lower than that of a single-transistor inverter of the same total area, which is why the topology is rarely used for analog amplification.\n\n### Summary\nThe circuit realizes a simple **NMOS logic inverter**. The series connection of \\(M_1\\) and \\(M_2\\) merely lengthens the pull-down path (useful for illustrating stacked devices in NAND/NOR gates or for reducing short-channel effects). All essential large-signal and small-signal properties follow from the usual MOSFET equations once the intermediate voltage \\(V_x\\) and the body effect on \\(M_2\\) are taken into account.",
        "format": "markdown",
        "sha256": "81adf6cc8f18d8740e6448b87e7ac0fb01947432f9ee8cd516683b550df04f59"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the common-gated series NMOS devices and states the key result that identical devices act approximately like one device with twice the channel length. However, its operating-region and small-signal analysis is substantially wrong: the lower device is not saturated in the described operating condition, and the stated output-resistance model is inappropriate.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1431,
        "output_tokens": 3146,
        "total_tokens": 4577,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2062,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1431,
        "output_tokens": 3146,
        "total_tokens": 4577,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2062,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit is a **resistive-load NMOS inverter** that uses **two series-connected enhancement-mode NMOS transistors** (\\(M_1\\) and \\(M_2\\)) as the pull-down network.\n\n### Circuit Topology\n- \\(M_1\\) and \\(M_2\\) are stacked (drain of \\(M_1\\) tied to source of \\(M_2\\)).\n- Both gates are driven by the same input \\(V_\\text{in}\\).\n- Source of \\(M_1\\) is grounded.\n- Drain of \\(M_2\\) connects to load resistor \\(R_D\\) (to \\(V_{DD}\\)) and is the output node \\(V_\\text{out}\\).\n\n### Operating Principle (Logic Inverter Behavior)\n| \\(V_\\text{in}\\) | State of \\(M_1, M_2\\) | \\(V_\\text{out}\\) |\n|-----------------|-----------------------|------------------|\n| Low (\\(\\approx 0\\)) | Both **OFF** | High (\\(\\approx V_{DD}\\)) |\n| High (\\(\\approx V_{DD}\\)) | Both **ON** | Low (\\(\\approx 0\\)) |\n\n- **Pull-up**: Passive resistor \\(R_D\\).\n- **Pull-down**: Series combination of \\(M_1\\) + \\(M_2\\) (higher effective on-resistance than a single device).\n\n### Key Non-Ideal Effects\n1. **Body effect on \\(M_2\\)**:  \n   Source of \\(M_2\\) sits at a positive voltage when current flows, so \\(V_{SB2} > 0\\). This raises \\(V_{th2}\\) above \\(V_{th1}\\), making \\(M_2\\) turn on later and conduct more weakly than \\(M_1\\).\n\n2. **Reduced noise margins / sharper transition degradation**:  \n   The series stack + body effect increases the input voltage needed to pull \\(V_\\text{out}\\) fully low, shifting the switching threshold and softening the VTC (voltage-transfer characteristic).\n\n3. **Asymmetric drive strength**:  \n   High-to-low propagation delay is longer than a conventional single-transistor NMOS inverter because of the stacked devices.\n\n### Summary\nThe circuit realizes a simple **NMOS logic inverter**. The series connection of \\(M_1\\)-\\(M_2\\) is typically used either to illustrate body-effect impact or to intentionally weaken the pull-down path (e.g., for ratioed-logic sizing studies).",
        "format": "markdown",
        "sha256": "8e5617462cd1cb7e24e06059f770389c81739abc750145417d5f49137c8af8b2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the common-gate series NMOS stack and resistive load, but treats it mainly as a logic inverter and misses the central result: the lower device operates in triode, making the pair behave approximately like one NMOS with a longer effective channel.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1431,
        "output_tokens": 1706,
        "total_tokens": 3137,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1179,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1431,
        "output_tokens": 1706,
        "total_tokens": 3137,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1179,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **resistive-load NMOS inverter**.\n\n### Circuit Topology\n- **Load**: Resistor \\(R_D\\) connected between \\(V_{DD}\\) and the output node \\(V_{\\text{out}}\\).\n- **Driver (pull-down network)**: Two enhancement-mode NMOS transistors \\(M_1\\) and \\(M_2\\) connected **in series**:\n  - Gates of both \\(M_1\\) and \\(M_2\\) are tied together and driven by the input \\(V_{\\text{in}}\\).\n  - Source of \\(M_1\\) is grounded.\n  - Drain of \\(M_1\\) connects to the source of \\(M_2\\) (intermediate node).\n  - Drain of \\(M_2\\) connects to \\(V_{\\text{out}}\\).\n\n### Qualitative Operation\n- **\\(V_{\\text{in}}\\) LOW** (\\(V_{\\text{in}} < V_{TN}\\)):  \n  Both \\(M_1\\) and \\(M_2\\) are **OFF**. No current flows through \\(R_D\\), so  \n  \\[\n  V_{\\text{out}} = V_{DD}\n  \\]\n  (logic **HIGH**).\n\n- **\\(V_{\\text{in}}\\) HIGH** (\\(V_{\\text{in}} > V_{TN}\\)):  \n  Both transistors turn **ON**, creating a conduction path from \\(V_{\\text{out}}\\) to ground. Current flows through \\(R_D\\), and  \n  \\[\n  V_{\\text{out}} \\approx 0\\,\\text{V}\n  \\]\n  (logic **LOW**), with the exact value set by the voltage divider formed by \\(R_D\\) and the series on-resistance of \\(M_1\\)-\\(M_2\\).\n\nThe circuit therefore implements a **logic inverter**.\n\n### Additional Remarks\n- If \\(M_1\\) and \\(M_2\\) are identical, the series combination behaves approximately as a **single NMOS device with double the channel length** (i.e., \\((W/L)_{\\text{eq}} = W/(2L)\\)). This halves the pull-down strength relative to a single transistor of the same width.\n- Transistor \\(M_2\\) is subject to the **body effect** (source potential > 0 while the bulk/substrate is normally at ground), which raises its threshold voltage and further weakens the pull-down network.\n- No DC current flows in the static HIGH or LOW states except for leakage; the only static power dissipation occurs if the circuit is held in the intermediate region where both devices conduct.\n\nThis topology is a classic example of early NMOS logic (resistive-load inverter) with a compound (series) driver.",
        "format": "markdown",
        "sha256": "5260842e4655c485a9f1dc57b4197fc26e331a93cef73c8b0d1e0ef014440fee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies the common-gate series NMOS pair and states that identical devices approximate one NMOS with twice the channel length, satisfying the golden solution’s full-credit criterion. The static-power aside is inaccurate but does not change that essential conclusion.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1431,
        "output_tokens": 2411,
        "total_tokens": 3842,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1834,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1431,
        "output_tokens": 2411,
        "total_tokens": 3842,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1834,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit consists of an **NMOS source-follower (common-drain) stage** \\(M_1\\) cascaded with a **PMOS common-gate stage** \\(M_2\\).\n\n**DC bias:**\n- The gate-source voltage of \\(M_1\\) is set by the DC level of \\(V_{\\mathrm{in}}\\).\n- The source-gate voltage of \\(M_2\\) is set by the bias voltage \\(V_b\\).\n- Current source \\(I_1\\) establishes the bias currents, with KCL at the common source node requiring\n  \\[\n  I_{D1} = I_1 + I_{D2}.\n  \\]\n- Resistor \\(R_D\\) sets the DC output level via the drop \\(I_{D2}R_D\\).\n\n**Small-signal analysis** (ro = ∞, body effect neglected):\n\nThe sources of \\(M_1\\) and \\(M_2\\) form a common node with signal voltage \\(v_s\\). Since the AC current through \\(I_1\\) is zero,\n\\[\ni_{d1} = i_{d2} \\triangleq i.\n\\]\n\nFor the NMOS source follower,\n\\[\ni = g_{m1}(v_{\\mathrm{in}} - v_s).\n\\]\n\nFor the PMOS common-gate device (gate at AC ground),\n\\[\ni = g_{m2} v_s \\implies v_s = \\frac{i}{g_{m2}}.\n\\]\n\nSubstituting yields\n\\[\ni = g_{m1}v_{\\mathrm{in}} - g_{m1}\\frac{i}{g_{m2}} \\implies i\\left(1 + \\frac{g_{m1}}{g_{m2}}\\right) = g_{m1}v_{\\mathrm{in}},\n\\]\n\\[\ni = \\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}v_{\\mathrm{in}}.\n\\]\n\nAt the output node the entire signal current \\(i\\) flows through \\(R_D\\),\n\\[\nv_{\\mathrm{out}} = i\\,R_D.\n\\]\n\n**Voltage gain:**\n\\[\nA_v = \\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}} = \\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D = (g_{m1}\\parallel g_{m2})R_D.\n\\]\n\nThe amplifier is **non-inverting**. The series connection of the two transconductances produces a lower effective \\(g_m\\) than a simple common-source stage, but the cascade is useful for buffering and broadband applications.",
        "format": "markdown",
        "sha256": "72061f39ec09f582b4a4c87d509bc12ec72c86dc3d0ed63813910fd38e79f76d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the source-follower driving a common-gate topology and gives the correct non-inverting gain. Although it mislabels M2 as PMOS and has an incorrect DC KCL statement, the golden solution’s full-credit rule applies.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2153,
        "output_tokens": 5260,
        "total_tokens": 7413,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2153,
        "output_tokens": 5260,
        "total_tokens": 7413,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **single-ended MOS differential amplifier** (unbalanced source-coupled pair).\n\n**Topology**\n- \\(M_1\\) and \\(M_2\\) are matched NMOS transistors with their sources tied together.\n- The common-source node is biased by the ideal tail current source \\(I_1\\).\n- The input signal \\(v_{\\text{in}}\\) is applied to the gate of \\(M_1\\).\n- The gate of \\(M_2\\) is held at a DC bias voltage \\(V_b\\).\n- The drain of \\(M_1\\) is connected directly to \\(V_{DD}\\) (AC ground).\n- The drain of \\(M_2\\) is loaded by resistor \\(R_D\\) and serves as the single-ended output node \\(v_{\\text{out}}\\).\n\n**DC bias**\nWith \\(V_{\\text{in}} = V_b\\) and identical transistors, the tail current splits equally:\n\\[\nI_{D1} = I_{D2} = \\frac{I_1}{2}.\n\\]\nBoth devices are assumed to remain in saturation.\n\n**Small-signal analysis**\nLet \\(g_m\\) be the transconductance of each MOSFET (evaluated at \\(I_D = I_1/2\\)).\n\nThe common-source node voltage is the average of the two gate voltages:\n\\[\nv_s = \\frac{v_{\\text{in}} + v_b}{2}.\n\\]\nSetting the AC component of the bias \\(v_b = 0\\) yields\n\\[\nv_s = \\frac{v_{\\text{in}}}{2}.\n\\]\nThe signal current in \\(M_2\\) is therefore\n\\[\ni_{d2} = g_m(v_b - v_s) = -\\frac{g_m}{2}v_{\\text{in}}.\n\\]\nThis current flows through the load resistor, producing\n\\[\nv_{\\text{out}} = -i_{d2} R_D = \\frac{g_m R_D}{2} v_{\\text{in}}.\n\\]\nHence the voltage gain is\n\\[\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = +\\frac{g_m R_D}{2}.\n\\]\n\n(The positive sign shows that the amplifier is non-inverting: an increase in \\(v_{\\text{in}}\\) reduces \\(i_{D2}\\), which reduces the drop across \\(R_D\\) and raises \\(v_{\\text{out}}\\).)\n\n**Remarks**\n- The same result is obtained by viewing the stage as a source-follower (\\(M_1\\)) driving a common-gate transistor (\\(M_2\\)) that share the tail current.\n- Finite output resistances \\(r_o\\) of the MOSFETs and the output resistance of \\(I_1\\) introduce only second-order corrections to the gain expression above and are customarily neglected in a first-order analysis.\n- The circuit rejects common-mode signals at the two gates because any common-mode variation appears equally on both sides of the pair and produces no current through \\(R_D\\).",
        "format": "markdown",
        "sha256": "0a16862651d16e1b1c81b23eed2c859d83d3aec9a3c9d08ca34e3a54fea03fcc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair and the equivalent source-follower-driving-common-gate view, with the output at M2’s drain. The non-inverting gain and signal-path reasoning are also correct; minor modeling caveats do not affect the essential answer.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2153,
        "output_tokens": 24221,
        "total_tokens": 26374,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2153,
        "output_tokens": 24221,
        "total_tokens": 26374,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23538,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **single-ended MOSFET differential amplifier** (source-coupled pair).\n\n**Topology description:**\n- \\(M_1\\) and \\(M_2\\) are matched NMOS transistors forming a differential pair.\n- The sources of \\(M_1\\) and \\(M_2\\) are tied together and biased by the constant tail current source \\(I_1\\).\n- The gate of \\(M_1\\) is the signal input \\(v_{\\mathrm{in}}\\).\n- The gate of \\(M_2\\) is held at a DC bias voltage \\(V_b\\) (AC ground).\n- The drain of \\(M_1\\) is connected directly to \\(V_{DD}\\) (AC ground).\n- The drain of \\(M_2\\) is connected to the load resistor \\(R_D\\), from which the single-ended output \\(v_{\\mathrm{out}}\\) is taken.\n\n**DC operating point** (assuming \\(M_1 = M_2\\) and \\(v_{\\mathrm{in}} = V_b\\)):\n- The tail current divides equally:  \n  \\[\n  I_{D1} = I_{D2} = \\frac{I_1}{2}\n  \\]\n- The DC output voltage is  \n  \\[\n  V_{\\mathrm{out}} = V_{DD} - \\left(\\frac{I_1}{2}\\right) R_D\n  \\]\n- Both devices operate in saturation provided  \n  \\[\n  V_{\\mathrm{out}} \\ge V_b - V_{TH}\n  \\]\n  (and the corresponding condition on the source node voltage).\n\n**Small-signal analysis** (\\(\\lambda = 0\\)):\n- With an ideal tail current source, the differential pair steers current such that  \n  \\[\n  i_{d2} = -\\frac{g_m}{2} v_{\\mathrm{in}}\n  \\]\n- The output voltage is therefore  \n  \\[\n  v_{\\mathrm{out}} = -i_{d2} R_D = \\frac{g_m R_D}{2} v_{\\mathrm{in}}\n  \\]\n- **Voltage gain:**\n  \\[\n  A_v = \\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}} = +\\frac{g_m R_D}{2}\n  \\]\n  where\n  \\[\n  g_m = \\sqrt{\\mu_n C_{\\mathrm{ox}} \\frac{W}{L} I_1}.\n  \\]\n\nThe amplifier is **non-inverting**. The connection of \\(M_1\\)’s drain directly to \\(V_{DD}\\) does not change the differential-pair current-steering relationship, so the gain expression is identical to that of a conventional single-ended diff-pair that uses a matched resistive load on the \\(M_1\\) side.",
        "format": "markdown",
        "sha256": "fc37f4b7558ed847c3fde95ade530ddf67d7120d39cf77c29944db7798bc2d09"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, with M2’s gate at Vb and output at its drain. The matched-device gain and non-inverting sign are also correct.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2153,
        "output_tokens": 4446,
        "total_tokens": 6599,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3831,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2153,
        "output_tokens": 4446,
        "total_tokens": 6599,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3831,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a PMOS common-source amplifier (\\(M_1\\)) with an NMOS current-source load (\\(M_2\\)). The output impedance \\(Z_\\text{out}\\) is the small-signal impedance seen at the \\(V_\\text{out}\\) node with the input \\(V_\\text{in}\\) AC-grounded (so that \\(R_S\\) appears between the gate of \\(M_1\\) and small-signal ground).\n\nTo see why \\(Z_\\text{out}\\) can be inductive, consider the small-signal model of \\(M_1\\) (source at AC ground). The capacitances \\(C_\\text{gs}\\) and \\(C_\\text{gd}\\) are essential. KCL at the gate node yields\n\\[\nV_g = \\frac{s C_\\text{gd}}{1/R_S + s(C_\\text{gs}+C_\\text{gd})}V_\\text{out}.\n\\]\nThe current injected into the drain terminal is then\n\\[\nI_\\text{in} = \\frac{V_\\text{out}}{r_o} + s C_\\text{gd}(V_\\text{out}-V_g) + g_m V_g,\n\\]\nwhich produces the admittance\n\\[\nY_\\text{out} = \\frac{1}{r_o} + \\frac{s C_\\text{gd}(g_m + 1/R_S + s C_\\text{gs})}{1/R_S + s(C_\\text{gs}+C_\\text{gd})}.\n\\]\n(The load device \\(M_2\\) simply contributes an additional parallel conductance \\(1/r_{o2}\\) and capacitance; it does not change the conclusions below.)\n\nWhen \\(r_o\\to\\infty\\), \n\\[\nZ_\\text{out} = \\frac{1 + s R_S(C_\\text{gs}+C_\\text{gd})}{s C_\\text{gd}[1 + g_m R_S + s R_S C_\\text{gs}]}.\n\\]\nA low-frequency series expansion of this expression (or of the finite-\\(r_o\\) result) takes the form\n\\[\nZ_\\text{out}\\approx R_\\text{eq} + \\frac{1}{s C_\\text{eq}} + s L_\\text{eq} + \\cdots.\n\\]\nThe positive \\(s L_\\text{eq}\\) term is an inductance. Consequently \\(\\operatorname{Im}(Z_\\text{out})\\) is positive over a range of frequencies (i.e., \\(Z_\\text{out}\\) is inductive) once the inductive term dominates the capacitive term.\n\n**Intuitive picture.**  \nA voltage applied at the drain couples to the gate through \\(C_\\text{gd}\\). The resulting gate voltage is low-pass filtered by the time constant \\(R_S C_\\text{gs}\\) and therefore lags the drain voltage. The controlled source \\(g_m V_g\\) consequently injects a lagging current into the drain node. A lagging current is precisely the behavior of an inductor.\n\n(The same inductive component appears for an NMOS common-source device; only the polarity of the supply connection changes.)\n\nFinal answer: \\(Z_{out}\\) inductive due to \\(R_S C_{gs}\\) lag via \\(C_{gd}\\)",
        "format": "markdown",
        "sha256": "7fba905d94a600fa24dbdd2bec81cb428c15b6645a1a4e28a28280f0066be6bd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It models M1 as a common-source device with the output at its drain, but the figure is a source follower with the output at M1’s source. Its Cgd feedback analysis therefore misses the key mechanism: Cgs makes Zout transition from about 1/gm1 to RS, rising with frequency when RS > 1/gm1.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1566,
        "output_tokens": 6390,
        "total_tokens": 7956,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5667,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1566,
        "output_tokens": 6390,
        "total_tokens": 7956,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5667,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a source follower (\\(M_1\\)) with series gate resistance \\(R_S\\), biased by the current-source load \\(M_2\\).\n\nTo obtain the output impedance, set \\(V_{\\mathrm{in}}=0\\) (AC ground) and attach a test source at the output node. Using the simple hybrid-\\(\\pi\\) model of \\(M_1\\) that retains \\(g_m\\) and \\(C_{gs}\\) yields\n\n\\[\nZ_{\\mathrm{out}}=\\frac{1+sC_{gs}R_S}{g_m+sC_{gs}}=\\frac{1}{g_m}\\cdot\\frac{1+sC_{gs}R_S}{1+sC_{gs}/g_m}.\n\\]\n\n(The finite \\(r_o\\) of \\(M_1\\) and the output resistance of \\(M_2\\) appear in parallel with this expression and do not alter the conclusions below.)\n\n- When \\(R_S>1/g_m\\) the zero lies at a lower frequency than the pole. Consequently \\(\\arg(Z_{\\mathrm{out}})\\) is positive over a range of frequencies, i.e., \\(Z_{\\mathrm{out}}\\) is inductive.\n- Equivalently, a low-frequency series expansion gives\n\n\\[\nZ_{\\mathrm{out}}\\approx\\frac{1}{g_m}+sL_{\\mathrm{eq}},\\qquad L_{\\mathrm{eq}}=\\frac{C_{gs}}{g_m}\\Bigl(R_S-\\frac{1}{g_m}\\Bigr)>0.\n\\]\n\nThus the impedance looking into the source of \\(M_1\\) (and therefore the impedance at \\(V_{\\mathrm{out}}\\)) behaves inductively.\n\nFinal answer: \\(Z_{out}=(1+sC_{gs}R_S)/(g_m+sC_{gs})\\) (inductive for \\(R_S>1/g_m\\))",
        "format": "markdown",
        "sha256": "06d50b352b3cf35e61a785c41c99d21a9d750294157636bd9cae6e696fd6ebce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the relevant output-impedance expression. It gives the correct condition, R_S > 1/g_m, and explains that the zero precedes the pole, producing positive phase (inductive behavior).",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1566,
        "output_tokens": 6968,
        "total_tokens": 8534,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1566,
        "output_tokens": 6968,
        "total_tokens": 8534,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source follower (\\(M_1\\)) with a current-source bias load (\\(M_2\\)).\n\nTo find the output impedance, set \\(V_\\mathrm{in}=0\\) (AC ground). The small-signal impedance looking into the source of \\(M_1\\) (neglecting \\(g_{ds}\\), \\(g_{mb}\\), and \\(C_{gd}\\) for simplicity) is then\n\\[\nZ_\\mathrm{out}(s)=\\frac{1+sC_{gs}R_S}{g_m+sC_{gs}}.\n\\]\n(The impedance of \\(M_2\\) appears in parallel with this expression but does not change the reasoning below.)\n\nIn the frequency range \\(\\omega\\ll g_m/C_{gs}\\),\n\\[\nZ_\\mathrm{out}(j\\omega)\\approx\\frac{1}{g_m}+j\\omega\\left(\\frac{R_SC_{gs}}{g_m}\\right).\n\\]\nThus \\(Z_\\mathrm{out}\\) consists of a resistance \\(1/g_m\\) in series with an inductance\n\\[\nL_\\mathrm{eq}=\\frac{R_SC_{gs}}{g_m}.\n\\]\nEquivalently, from the exact expression one finds\n\\[\n\\mathrm{Im}(Z_\\mathrm{out})=\\frac{\\omega C_{gs}(R_Sg_m-1)}{g_m^2+(\\omega C_{gs})^2},\n\\]\nwhich is positive (inductive) whenever \\(R_S>1/g_m\\).\n\n(The same inductive behavior is obtained for the classical bipolar emitter-follower with finite base resistance.)\n\nFinal answer: \\(Z_{out}\\approx1/g_m+s(C_{gs}R_S/g_m)\\) (when \\(R_S>1/g_m\\))",
        "format": "markdown",
        "sha256": "f2a32522a0246153c36a2f4d98da84b67fce30b13ffa7d65f20b6f4121ed26fe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the source follower, gives the right impedance expression, and derives the correct inductive condition, RS > 1/gm. However, its low-frequency expansion omits the denominator contribution: the equivalent inductance is Cgs(RS − 1/gm)/gm, not RS Cgs/gm. It also does not explain the high-frequency limit of RS as Cgs shorts the gate to the source.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1566,
        "output_tokens": 10274,
        "total_tokens": 11840,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9870,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1566,
        "output_tokens": 10274,
        "total_tokens": 11840,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9870,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit consists of two NMOS transistors (\\(\\mathrm{M}_1\\) and \\(\\mathrm{M}_2\\)), resistor \\(R_{\\mathrm{D}1}\\), supply \\(V_{DD}\\), and a DC current source \\(I_{\\mathrm{in}}\\).\n\n**Topology**\n- \\(\\mathrm{M}_1\\) with load \\(R_{\\mathrm{D}1}\\) forms a common-source voltage amplifier. Its input is node \\(X\\) and its output is \\(V_{\\mathrm{out}}\\).\n- \\(\\mathrm{M}_2\\) senses \\(V_{\\mathrm{out}}\\) at its gate and sinks a current from node \\(X\\).\n- The current \\(I_{\\mathrm{in}}\\) is injected into the high-impedance node \\(X\\).\n\nThis creates a **feedback loop** around the core amplifier \\(\\mathrm{M}_1\\)-\\(R_{\\mathrm{D}1}\\).\n\n**DC Analysis**\nGate currents are zero. KCL at node \\(X\\) therefore forces\n\\[\nI_{D2}=I_{\\mathrm{in}}.\n\\]\n\nAssuming \\(\\mathrm{M}_2\\) remains in saturation,\n\\[\nI_{\\mathrm{in}}=\\frac12\\mu_nC_{\\mathrm{ox}}\\left(\\frac{W}{L}\\right)_2(V_{\\mathrm{out}}-V_{\\mathrm{TH}2})^2,\n\\]\nwhich yields the explicit input-output relation\n\\[\nV_{\\mathrm{out}}=V_{\\mathrm{TH}2}+\\sqrt{\\frac{2I_{\\mathrm{in}}}{\\mu_nC_{\\mathrm{ox}}(W/L)_2}}.\n\\]\n\nThe drain current of \\(\\mathrm{M}_1\\) is set by Ohm’s law,\n\\[\nI_{D1}=\\frac{V_{DD}-V_{\\mathrm{out}}}{R_{\\mathrm{D}1}}.\n\\]\nHence the voltage required at the gate of \\(\\mathrm{M}_1\\) (still assuming saturation) is\n\\[\nV_X=V_{\\mathrm{TH}1}+\\sqrt{\\frac{2I_{D1}}{\\mu_nC_{\\mathrm{ox}}(W/L)_1}}.\n\\]\n\n**Saturation conditions** that must be verified a posteriori are\n\\[\nV_{\\mathrm{out}}\\ge V_X-V_{\\mathrm{TH}1},\\qquad V_X\\ge V_{\\mathrm{out}}-V_{\\mathrm{TH}2}.\n\\]\n\n**Feedback polarity and loop gain**\nA small positive perturbation at \\(X\\) lowers \\(V_{\\mathrm{out}}\\) (common-source stage). The lower gate drive on \\(\\mathrm{M}_2\\) reduces \\(I_{D2}\\), which in turn allows the capacitance at \\(X\\) to charge further. The regeneration shows that the feedback is **positive**.\n\nIncluding channel-length modulation of \\(\\mathrm{M}_2\\), the loop gain is\n\\[\nLG=g_{m1}R_{\\mathrm{D}1}\\cdot g_{m2}r_{o2}.\n\\]\n- If \\(LG<1\\) the saturation operating point derived above can be stable.\n- If \\(LG>1\\) that point is unstable and the circuit latches to a different region (typically \\(\\mathrm{M}_1\\) off or deeply linear).\n\n**Small-signal transimpedance**\nSolving the small-signal network (both transistors in saturation) gives\n\\[\n\\frac{v_{\\mathrm{out}}}{i_{\\mathrm{in}}}=\\frac{1}{g_{m2}-1/(g_{m1}R_{\\mathrm{out}}r_{o2})}=\\frac{1}{g_{m2}}\\cdot\\frac{LG}{LG-1},\n\\]\nwhere \\(R_{\\mathrm{out}}=R_{\\mathrm{D}1}\\parallel r_{o1}\\). When \\(r_{o2}\\to\\infty\\) (and therefore \\(LG\\to\\infty\\)) the expression collapses to the familiar result\n\\[\n\\frac{v_{\\mathrm{out}}}{i_{\\mathrm{in}}}=\\frac1{g_{m2}},\n\\]\nwhich is also the derivative of the large-signal square-root characteristic obtained earlier.\n\n**Input resistance seen by \\(I_{\\mathrm{in}}\\)**\n\\[\nR_{\\mathrm{in}}=\\frac{v_x}{i_{\\mathrm{in}}}=\\frac{r_{o2}}{1-LG}.\n\\]\nThus when \\(LG>1\\) the port at \\(X\\) exhibits a **negative resistance**.\n\nIn summary, the circuit forces \\(I_{D2}=I_{\\mathrm{in}}\\) and thereby produces a square-root transimpedance characteristic, but the positive feedback requires \\(LG<1\\) (or additional compensation) for the desired operating point to be usable.",
        "format": "markdown",
        "sha256": "8009fec7c252dffb01e8a6c0affa47a6ef2248a9687aa5300a83046201a2942c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2 as controlled by Vout, traces the positive-feedback loop, and explains the negative input resistance and instability when loop gain exceeds one. The loop-gain notation is slightly inconsistent about including ro1, but this does not change the essential analysis.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1955,
        "output_tokens": 12026,
        "total_tokens": 13981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1955,
        "output_tokens": 12026,
        "total_tokens": 13981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11020,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit consists of an **NMOS common-source amplifier** (\\(M_1\\) with resistive load \\(R_{D1}\\)) and a second NMOS transistor \\(M_2\\) providing **feedback**.\n\n**DC Operating Point (Metastable)**\n\n- The input current satisfies \\(I_\\text{in} = I_{D2}\\).\n- Assuming saturation and the square-law model,\n\\[\nI_\\text{in} = \\frac12 \\mu_n C_\\text{ox} \\left(\\frac{W}{L}\\right)_2 (V_\\text{out}-V_{TH})^2.\n\\]\nSolving for the output voltage yields\n\\[\nV_\\text{out} = V_{TH} + \\sqrt{\\frac{2I_\\text{in}}{\\mu_n C_\\text{ox}(W/L)_2}}.\n\\]\n- The CS stage then sets\n\\[\nI_{D1} = \\frac{V_{DD}-V_\\text{out}}{R_{D1}} = \\frac12 \\mu_n C_\\text{ox}\\left(\\frac{W}{L}\\right)_1(V_X-V_{TH})^2,\n\\]\nwhich determines the required gate voltage \\(V_X\\) of \\(M_1\\).\n\nBoth devices must be checked for saturation at this bias point:\n- \\(M_2\\): \\(V_X \\ge V_\\text{out}-V_{TH}\\)\n- \\(M_1\\): \\(V_\\text{out} \\ge V_X-V_{TH}\\)\n\n**Feedback Polarity and Stability**\n\nThe loop consists of two inversions:\n- \\(V_X\\uparrow\\;\\Rightarrow\\;I_{D1}\\uparrow\\;\\Rightarrow\\;V_\\text{out}\\downarrow\\) (CS stage),\n- \\(V_\\text{out}\\downarrow\\;\\Rightarrow\\;I_{D2}\\downarrow\\;\\Rightarrow\\;V_X\\uparrow\\) (current imbalance at node \\(X\\)).\n\nThe **feedback is therefore positive**.  \n\nIncluding channel-length modulation, the small-signal resistance seen at node \\(X\\) is\n\\[\nr_X = \\frac{1}{g_{ds2}-g_{m2}(g_{m1}R_{D1}')},\n\\]\nwhere \\(R_{D1}'=R_{D1}\\parallel r_{o1}\\). Whenever the loop gain \\(g_{m1}R_{D1}'>g_{ds2}/g_{m2}\\) (normally true), \\(r_X<0\\). The associated closed-loop pole lies in the right half-plane, confirming that the bias point derived above is **unstable (metastable)**.\n\n**Large-Signal Behavior – Bistable Latch**\n\nBecause of the regenerative feedback the circuit behaves as a current-triggered latch with two stable states:\n\n1. **Reset state** (\\(V_\\text{out}\\approx V_{DD}\\))  \n   - \\(M_1\\) is off (\\(V_X<V_{TH}\\)).  \n   - \\(M_2\\) operates in the deep-triode region and sinks \\(I_\\text{in}\\).  \n   - Approximate trip condition (onset of regeneration):\n   \\[\n   I_\\text{in,crit}\\approx\\mu_n C_\\text{ox}\\left(\\frac{W}{L}\\right)_2\\Bigl[(V_{DD}-V_{TH})V_{TH}-\\tfrac12 V_{TH}^2\\Bigr].\n   \\]\n   When \\(I_\\text{in}\\) exceeds this value the circuit regeneratively switches.\n\n2. **Set state** (\\(V_\\text{out}\\approx 0\\))  \n   - \\(M_2\\) is off, \\(M_1\\) is on (triode).  \n   - Node \\(X\\) is charged by the current source to a high voltage (limited in practice by the compliance of \\(I_\\text{in}\\) or by avalanche/breakdown).  \n   - The circuit remains latched even if \\(I_\\text{in}\\) is subsequently reduced to zero; unlatching requires reversing \\(I_\\text{in}\\) or removing power.\n\n**Summary of Circuit Function**\n\nThe topology is a **regenerative current-sense latch** (analogous to a simplified thyristor or SRAM cell with a resistive-load inverter). The square-law expression for \\(V_\\text{out}\\) locates only the metastable point; the circuit does not operate stably there. Useful design quantities are the critical triggering current \\(I_\\text{in,crit}\\) and the two logic levels \\(V_{DD}\\) and \\(0\\).",
        "format": "markdown",
        "sha256": "2491c12638058ee711fa7a044e6117cc676b93ce44fb098c899f201cdd756140"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the positive-feedback loop: a fall in Vout reduces M2 current, raising X further. It derives negative input resistance and concludes the bias is unstable and the circuit latches, satisfying the full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1955,
        "output_tokens": 12180,
        "total_tokens": 14135,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11192,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1955,
        "output_tokens": 12180,
        "total_tokens": 14135,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11192,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit consists of a **common-source (CS) amplifier** formed by \\(M_1\\) and \\(R_{D1}\\), with output taken at the drain of \\(M_1\\).\n\n- The input current \\(I_\\mathrm{in}\\) is injected into node \\(X\\) (gate of \\(M_1\\)).\n- Transistor \\(M_2\\) samples \\(V_\\mathrm{out}\\) and returns a current to node \\(X\\).\n\n**Feedback polarity.**  \nConsider a positive perturbation at \\(X\\):\n- \\(V_X \\uparrow\\) \\(\\rightarrow\\) \\(I_{D1} \\uparrow\\) \\(\\rightarrow\\) \\(V_\\mathrm{out} \\downarrow\\) (inversion by the CS stage).\n- \\(V_\\mathrm{out} \\downarrow\\) \\(\\rightarrow\\) \\(I_{D2} \\downarrow\\).\n- The excess current \\(I_\\mathrm{in}-I_{D2}\\) charges the capacitance at \\(X\\), so \\(V_X\\) rises further.\n\nThe loop therefore realizes **positive feedback**.\n\n**Large-signal DC operating points** (square-law MOS model, \\(\\lambda=0\\)).  \nBecause \\(I_{D2}=I_\\mathrm{in}\\) must hold in steady state, three candidate regions exist:\n\n1. \\(M_1\\) off / \\(M_2\\) linear  \n   \\[\n   V_\\mathrm{out}=V_{DD},\\qquad\n   V_X\\approx\\frac{I_\\mathrm{in}}{k_2(V_{DD}-V_{TH})}\n   \\]\n   (valid while \\(V_X\\le V_{TH}\\)).\n\n2. Both devices saturated  \n   \\[\n   V_\\mathrm{out}=V_{TH}+\\sqrt{\\frac{2I_\\mathrm{in}}{k_2}},\\qquad\n   V_X=V_{TH}+\\sqrt{\\frac{2(V_{DD}-V_\\mathrm{out})}{k_1R_{D1}}}.\n   \\]\n   Saturation conditions must still be verified; when they hold the point is an **unstable** equilibrium.\n\n3. \\(M_1\\) linear / \\(M_2\\) saturated  \n   \\(V_\\mathrm{out}\\) is still set by the expression in (2), while \\(V_X\\) is obtained from the triode equation of \\(M_1\\).  \n   This point likewise yields a negative incremental resistance and is unstable.\n\nConsequently the only bounded, stable DC solution for moderate \\(I_\\mathrm{in}\\) is state 1. For large \\(I_\\mathrm{in}\\) the circuit has no bounded operating point (\\(V_X\\to\\infty\\)).\n\n**Small-signal analysis** (both devices saturated, Early effect included).  \n\\[\n\\begin{align*}\nv_\\mathrm{out}&=-g_{m1}(R_{D1}\\parallel r_{o1})v_x,\\\\\ni_\\mathrm{in}&=\\frac{v_x}{r_{o2}}+g_{m2}v_\\mathrm{out}.\n\\end{align*}\n\\]\nSolving yields the transimpedance\n\\[\n\\frac{v_\\mathrm{out}}{i_\\mathrm{in}}=\\frac{-g_{m1}(R_{D1}\\parallel r_{o1})r_{o2}}{1-g_{m1}g_{m2}(R_{D1}\\parallel r_{o1})r_{o2}}\n\\]\nand the input resistance\n\\[\nR_\\mathrm{in}=\\frac{r_{o2}}{1-g_{m1}g_{m2}(R_{D1}\\parallel r_{o1})r_{o2}}.\n\\]\nWhen the loop gain\n\\[\nT=g_{m1}g_{m2}(R_{D1}\\parallel r_{o1})r_{o2}>1\n\\]\n(the usual case) one obtains the simple results\n\\[\n\\frac{v_\\mathrm{out}}{i_\\mathrm{in}}\\approx\\frac{1}{g_{m2}},\\qquad\nR_\\mathrm{in}\\approx-\\frac{1}{g_{m1}g_{m2}(R_{D1}\\parallel r_{o1})}.\n\\]\nThe negative input resistance confirms that any bias point lying in saturation is unstable; the circuit therefore behaves as a **negative-resistance element** (or a latch) rather than a conventional linear amplifier.\n\n**Summary of circuit function**  \n- Positive-feedback CS stage around \\(M_1\\).  \n- Realizes \\(R_\\mathrm{in}<0\\) and a transimpedance \\(\\approx1/g_{m2}\\).  \n- Large-signal behaviour is bistable/latching for a limited range of \\(I_\\mathrm{in}\\); outside that range \\(V_X\\) is unbounded.",
        "format": "markdown",
        "sha256": "2b194f7a86092c821131600e54a77d69b3d8ab62fbb0672174ec8939a34e9beb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly treats M2 as controlled by Vout rather than diode-connected, identifies the positive-feedback loop, and derives the negative input resistance and resulting instability/latching. The extra analysis is consistent with the essential conclusion.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1955,
        "output_tokens": 22529,
        "total_tokens": 24484,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21501,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1955,
        "output_tokens": 22529,
        "total_tokens": 24484,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21501,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **transimpedance amplifier (TIA)** with shunt-shunt feedback. It consists of:\n- A common-gate (CG) input stage (\\(M_1\\)) with load \\(R_{D1}\\)\n- A common-source (CS) gain stage (\\(M_2\\)) with load \\(R_{D2}\\)\n- Resistive feedback \\(R_F\\) around the cascade\n\n**Small-signal analysis** (low frequency, \\(r_o \\to \\infty\\)):\n\n- Gate of \\(M_1\\) is AC ground.\n- \\(v_{gs1} = -v_{in}\\) \\(\\implies\\) \\(i_{d1} = -g_{m1} v_{in}\\)\n- Node \\(X\\): \\(v_x = g_{m1} R_{D1} v_{in}\\)\n- \\(v_{gs2} = v_x\\) \\(\\implies\\) \\(i_{d2} = g_{m2} v_x = g_{m1} g_{m2} R_{D1} v_{in}\\)\n\n**KCL at input node** (\\(v_{in}\\)):\n\\[\nI_{in} + \\frac{v_{out} - v_{in}}{R_F} - g_{m1} v_{in} = 0\n\\]\n\n**KCL at output node** (\\(v_{out}\\)):\n\\[\n\\frac{v_{out}}{R_{D2}} + \\frac{v_{out} - v_{in}}{R_F} + g_{m1} g_{m2} R_{D1} v_{in} = 0\n\\]\n\n**Closed-loop transimpedance**:\n\\[\n\\frac{v_{out}}{I_{in}} = -\\frac{K R_F}{K + 1 + g_{m1} R_F}\n\\]\nwhere\n\\[\nK = \\frac{(g_{m1} g_{m2} R_{D1} R_F - 1) R_{D2}}{R_F + R_{D2}}.\n\\]\n\n**High loop-gain approximation** (\\(g_{m1} g_{m2} R_{D1} (R_F \\parallel R_{D2}) \\gg 1\\)):\n- \\(v_{in} \\approx 0\\) (virtual ground)\n- \\(i_{RF} \\approx -I_{in}\\)\n- \n\\[\n\\frac{v_{out}}{I_{in}} \\approx -R_F\n\\]\n\nThe CG stage provides a low open-loop input impedance, which is further reduced by feedback. The CS stage provides the voltage gain necessary for a large loop gain, desensitizing the closed-loop gain to transistor parameters.",
        "format": "markdown",
        "sha256": "0bbec41031d5fe6b031b42c995c15468b400e693fe545d87f01e0d08fe418a77"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as output-to-input feedback forming a TIA. The negative-feedback behavior, high-loop-gain transimpedance, and supporting small-signal analysis are consistent with the golden solution.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2139,
        "output_tokens": 5757,
        "total_tokens": 7896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5166,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2139,
        "output_tokens": 5757,
        "total_tokens": 7896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5166,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **shunt-shunt feedback transimpedance amplifier** (TIA). It consists of:\n\n- A common-gate (CG) input stage (\\(M_1\\)) that provides a low input impedance and converts the input current to a voltage at node \\(X\\).\n- A common-source (CS) voltage-gain stage (\\(M_2\\)).\n- Resistive shunt-shunt feedback via \\(R_F\\).\n\n## Small-Signal Analysis (Low Frequency)\n\nNeglect channel-length modulation (\\(r_o \\to \\infty\\)) and body effect. The small-signal parameters are \\(g_{m1}\\) and \\(g_{m2}\\).\n\n**KCL at the input node** (source of \\(M_1\\)):\n\\[\ni_{\\mathrm{in}} + \\frac{v_{\\mathrm{out}} - v_y}{R_F} = g_{m1} v_y\n\\]\n\\[\nv_y = \\frac{i_{\\mathrm{in}} + v_{\\mathrm{out}}/R_F}{g_{m1} + 1/R_F}\n\\]\n\n**Voltage at node \\(X\\)** (drain of \\(M_1\\)):\n\\[\nv_x = g_{m1} R_{D1} v_y\n\\]\n\n**KCL at the output node**:\n\\[\n-\\frac{v_{\\mathrm{out}}}{R_{D2}} = g_{m2} v_x + \\frac{v_{\\mathrm{out}} - v_y}{R_F}\n\\]\n\n**Closed-loop transimpedance**:\n\\[\n\\frac{v_{\\mathrm{out}}}{i_{\\mathrm{in}}} = \\frac{R_{D2}(1 - g_{m1} g_{m2} R_{D1} R_F)}{1 + g_{m1}(R_F + R_{D2} + g_{m2} R_{D1} R_{D2})}\n\\]\n\n### Approximations\n- When the loop gain is large (\\(g_{m1} g_{m2} R_{D1} R_{D2} \\gg 1\\)):\n\\[\n\\frac{v_{\\mathrm{out}}}{i_{\\mathrm{in}}} \\approx -R_F\n\\]\n- The feedback forces the input node toward virtual ground, yielding a low closed-loop input impedance\n\\[\nR_{\\mathrm{in}} \\approx 0\n\\]\n(exactly \\(R_{\\mathrm{in}} = (1 + K/R_F)/(g_{m1} + 1/R_F)\\) where \\(K = v_{\\mathrm{out}}/i_{\\mathrm{in}}\\)).\n\nThe signal \\(i_{\\mathrm{RF}}\\) is the feedback current that cancels \\(i_{\\mathrm{in}}\\) at the input node under high loop gain, confirming proper negative feedback polarity (CS stage provides the required inversion).",
        "format": "markdown",
        "sha256": "fc74a41a19c39106841aa806dab715b8bf1aa4c948e78661eb45aefda12193f5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as output-to-input negative feedback forming a transimpedance amplifier. This meets the golden full-credit rule; the simplified loop-gain condition does not alter the essential circuit interpretation.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2139,
        "output_tokens": 6237,
        "total_tokens": 8376,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5604,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2139,
        "output_tokens": 6237,
        "total_tokens": 8376,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5604,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **transimpedance amplifier** (TIA) that converts an input current \\(I_\\text{in}\\) into an output voltage \\(V_\\text{out}\\).\n\n**Topology identification:**\n- Transistor \\(M_1\\) (NMOS) is biased by a constant gate voltage \\(V_b\\) and configured as a **common-gate (CG)** stage. The input current is applied to its source. Its drain load is \\(R_{D1}\\), producing an intermediate voltage at node \\(X\\).\n- Transistor \\(M_2\\) (NMOS) is configured as a **common-source (CS)** stage with load \\(R_{D2}\\). It takes the signal at node \\(X\\) and produces the final output \\(V_\\text{out}\\).\n- Resistor \\(R_F\\) closes a **shunt-shunt** (voltage-sampling, current-mixing) feedback loop around both stages.\n\n**Signal polarities and feedback sense:**\n- An increase in the sunk input current \\(I_\\text{in}\\) lowers the source voltage of \\(M_1\\), increasing \\(I_{D1}\\). Consequently the voltage at \\(X\\) falls.\n- The falling voltage at \\(X\\) reduces \\(I_{D2}\\), so \\(V_\\text{out}\\) rises.\n- The overall forward path from \\(I_\\text{in}\\) to \\(V_\\text{out}\\) is therefore non-inverting.\n- When \\(V_\\text{out}\\) rises, feedback current \\(i_{RF}\\) flows **into** the input node through \\(R_F\\). This current supplies the sunk \\(I_\\text{in}\\), reducing the error current that must be absorbed by \\(M_1\\). The feedback is consequently **negative**.\n\n**Ideal closed-loop behavior:**\nWith large loop gain the error current into the source of \\(M_1\\) approaches zero, forcing\n\\[\ni_{RF}\\approx I_\\text{in}\\qquad\\Rightarrow\\qquad V_\\text{out}\\approx I_\\text{in}\\,R_F.\n\\]\n(The sign is positive because the forward path itself is non-inverting.) The same feedback action simultaneously lowers the already-small input impedance of the CG stage and lowers the output impedance seen at \\(V_\\text{out}\\).\n\n**Summary of functions:**\n| Element | Role |\n|---------|------|\n| \\(M_1,R_{D1}\\) | Low-input-impedance CG current buffer / first voltage-gain stage |\n| \\(M_2,R_{D2}\\) | CS voltage-gain stage |\n| \\(R_F\\) | Shunt-shunt feedback that sets the closed-loop transimpedance and desensitizes gain |\n| \\(V_b\\) | DC bias for the CG stage |\n\nThe circuit is therefore a classic two-stage shunt-shunt feedback TIA.",
        "format": "markdown",
        "sha256": "4e054463467a685e8e7d32334b2a602acb5b0c40ff60be7add2fa95dea219bbc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as output-to-input feedback forming a TIA; it also identifies the feedback as negative. The stated transimpedance sign differs from the golden solution’s input-current convention, but the full-credit rule does not require that sign.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2139,
        "output_tokens": 12412,
        "total_tokens": 14551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11810,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2139,
        "output_tokens": 12412,
        "total_tokens": 14551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11810,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **flipped voltage follower (FVF)**.\n\n## Topology\n- \\(\\mathrm{M}_1\\) (NMOS) has a fixed gate bias \\(V_b\\) and forms the main signal path device.\n- \\(\\mathrm{M}_2\\) (PMOS) closes a **shunt feedback** loop around \\(\\mathrm{M}_1\\).\n- \\(I_1\\) sets the DC current in \\(\\mathrm{M}_1\\).\n- The unlabeled current source (denoted \\(I_B\\) below) sets the standing current available at the intermediate node.\n- \\(I_\\mathrm{in}\\) is injected at the low-impedance node.\n\n## DC Operating Point\nAssume both devices are in saturation and \\(V_\\mathrm{out}\\) is unloaded. KCL immediately gives\n\\[\nI_{D1}=I_1.\n\\]\nHence the source voltage of \\(\\mathrm{M}_1\\) is fixed by the usual square-law relation\n\\[\nV_x=V_b-V_{\\mathrm{th}n}-\\sqrt{\\frac{2I_1}{k_n'(W/L)_1}}.\n\\]\n(The body effect on \\(\\mathrm{M}_1\\) only shifts the numerical value of \\(V_x\\).)\n\nKCL at the same node then fixes the current in the feedback device:\n\\[\nI_{D2}=I_B-I_1-I_\\mathrm{in}.\n\\]\nConsequently\n\\[\nV_\\mathrm{out}=V_{DD}-|V_{\\mathrm{th}p}|-\\sqrt{\\frac{2I_{D2}}{k_p'(W/L)_2}}.\n\\]\n\\(V_\\mathrm{out}\\) therefore moves in the same direction as \\(I_\\mathrm{in}\\).\n\n## Small-Signal Parameters\nWith the bulk of \\(\\mathrm{M}_1\\) at ground the relevant parameters are \\(g_{m1}\\), \\(g_{mb1}\\), \\(g_{ds1}\\), \\(g_{m2}\\) and \\(g_{ds2}\\).\n\n**Transimpedance** (unloaded)\n\\[\nR_z=\\frac{v_\\mathrm{out}}{i_\\mathrm{in}}=\\frac{1}{g_{m2}+g_{ds1}g_{ds2}/G}\\approx\\frac{1}{g_{m2}},\n\\]\nwhere \\(G=g_{m1}+g_{mb1}+g_{ds1}\\).\n\n**Resistance looking into the \\(I_\\mathrm{in}\\) node**\n\\[\nR_x=\\frac{v_x}{i_\\mathrm{in}}\\approx\\frac{g_{ds1}}{g_{m2}G}\\approx\\frac{1}{g_{m1}g_{m2}r_{o1}}.\n\\]\n(The exact expression including all conductances is of the same order.) This extremely low impedance is the defining property of the FVF.\n\n**Resistance looking into \\(V_\\mathrm{out}\\)** is high (on the order of \\(r_{o1}\\parallel r_{o2}\\) modified by the loop gain), as expected for the high-impedance drain node that drives the gate of \\(\\mathrm{M}_2\\).\n\n## Summary of Behaviour\n- The feedback loop keeps \\(V_x\\) nearly constant while absorbing the large signal current \\(I_\\mathrm{in}\\).\n- The voltage that appears at the gate of \\(\\mathrm{M}_2\\) is a compressed replica of \\(I_\\mathrm{in}\\) (\\(v_\\mathrm{out}\\approx i_\\mathrm{in}/g_{m2}\\)).\n- The same node \\(V_\\mathrm{out}\\) can be used to drive the gates of additional PMOS devices, turning the cell into a low-voltage current mirror/copier.\n\nThe circuit is therefore most often employed as a low-input-impedance current sensor, a compact class-AB output stage, or a building block for low-voltage current-mode signal processing.",
        "format": "markdown",
        "sha256": "d7b0b81d0335b33d7608b6c1133a675d0bfc25fdc71107a843e8a652382e358f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the NMOS common-gate input device and PMOS feedback path, and gives the very low input resistance and vout/iin ≈ 1/gm2, satisfying the explicit full-credit rule. Its claim that Rout is high is incorrect, but does not negate those required core points.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2047,
        "output_tokens": 9291,
        "total_tokens": 11338,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8449,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2047,
        "output_tokens": 9291,
        "total_tokens": 11338,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8449,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **flipped voltage follower (FVF)** cell, commonly used in low-voltage CMOS analog design. It is configured here as a **transimpedance stage** (current-to-voltage converter).\n\n**Device identification**\n- \\(M_1\\): NMOS, gate biased at constant \\(V_b\\)\n- \\(M_2\\): PMOS\n- \\(I_1\\): constant bias current\n- Unlabeled current source at bottom right: constant bias current \\(I_B\\)\n- \\(I_{\\text{in}}\\): signal (input) current\n- \\(V_{\\text{out}}\\) taken at the drain of \\(M_1\\) / gate of \\(M_2\\)\n\n**DC operating point**\n- \\(I_{D1} = I_1\\) (set by the ideal current source).\n- Consequently,\n  \\[\n  V_Y = V_b - V_{GS1}(I_1),\n  \\]\n  where node \\(Y\\) is the source of \\(M_1\\) / drain of \\(M_2\\). To first order \\(V_Y\\) is **constant**.\n- KCL at node \\(Y\\) then yields the current in the feedback device:\n  \\[\n  I_{D2} = I_B - I_1 - I_{\\text{in}}.\n  \\]\n- The output voltage follows from the gate-source voltage of \\(M_2\\):\n  \\[\n  V_{\\text{out}} = V_{DD} - V_{SG2}(I_{D2}).\n  \\]\n\n**Small-signal behaviour**\nUsing the hybrid-\\(\\pi\\) models of \\(M_1\\) and \\(M_2\\) (finite \\(g_{ds}\\) included, body effect neglected for brevity) the two nodal equations are\n\n\\[\n\\begin{align*}\ni_{d1} &= -g_{m1}v_y + g_{ds1}(v_x - v_y) = 0,\\\\\ni_{\\text{in}} &= g_{m2}v_x + g_{ds2}v_y.\n\\end{align*}\n\\]\n\nSolving gives the **transimpedance**\n\\[\nR_m = \\frac{v_{\\text{out}}}{i_{\\text{in}}}\n= \\frac{1}{g_{m2} + \\dfrac{g_{ds1}g_{ds2}}{g_{m1}+g_{ds1}}}\n\\approx \\frac{1}{g_{m2}}.\n\\]\n\nThe impedance seen by the input current source (node \\(Y\\)) is extremely low:\n\\[\nR_{\\text{in}} = \\frac{v_y}{i_{\\text{in}}}\n\\approx \\frac{g_{ds1}}{g_{m1}g_{m2}} = \\frac{1}{g_{m2}(g_{m1}r_{o1})}.\n\\]\n\n(The same low-impedance node is the classic feature that gives the FVF its name.)\n\n**Output resistance** (looking into the \\(V_{\\text{out}}\\) terminal with \\(I_{\\text{in}}=0\\)) evaluates to\n\\[\nR_{\\text{out}} \\approx \\frac{1}{g_{m2}},\n\\]\nconsistent with the transimpedance derived above.\n\n**Summary of properties**\n- Input port (node \\(Y\\)) presents a near-ideal AC ground / very low impedance while remaining at a well-defined DC voltage set by \\(V_b\\).\n- Current injected at that port is absorbed by \\(M_2\\); the resulting gate voltage of \\(M_2\\) appears at \\(V_{\\text{out}}\\) with gain \\(1/g_{m2}\\).\n- The topology is especially attractive for low supply voltages because the minimum \\(V_{DD}\\) is only \\(V_{GS}+V_{DSsat}\\).\n\nThese characteristics make the cell a popular building block for current-mode circuits, class-AB output stages, and highly linear transimpedance amplifiers.",
        "format": "markdown",
        "sha256": "0b3ea3170cb2585028957a6b8f989edefa8af19516eaab1eb6bc21d45cc6e7c2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies M1 as the common-gate NMOS input device and M2 as the PMOS feedback device driven by Vout and connected back to the input node. It derives the very low input resistance and the approximately 1/gm2 transimpedance and output resistance; the extra FVF label does not alter the essential analysis.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2047,
        "output_tokens": 10128,
        "total_tokens": 12175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9260,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2047,
        "output_tokens": 10128,
        "total_tokens": 12175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9260,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit is a **flipped voltage follower (FVF)** configured as a **transimpedance stage** (current-controlled voltage source). It senses an input current \\(I_\\mathrm{in}\\) at a very low-impedance node and produces an output voltage \\(V_\\mathrm{out}\\).\n\n## Device Identification and Biasing\n- \\(M_1\\) is an NMOS transistor with gate biased at the fixed voltage \\(V_b\\).\n- \\(M_2\\) is a PMOS transistor.\n- \\(I_1\\) sets the DC drain current of \\(M_1\\).\n- The unlabeled DC current source (denoted \\(I_b\\) below) sets the quiescent current of \\(M_2\\).\n- Both transistors are assumed to operate in saturation.\n\n**DC operating point** (neglecting channel-length modulation):\n- Because no DC current is drawn from the \\(V_\\mathrm{out}\\) terminal,\n  \\[\n  I_{D1}=I_1=\\text{constant}.\n  \\]\n  Consequently the source voltage of \\(M_1\\) (node \\(X\\)) is fixed:\n  \\[\n  V_X=V_b-V_{GS1}(I_1).\n  \\]\n- KCL at node \\(X\\) then yields the drain current of \\(M_2\\):\n  \\[\n  I_{D2}=I_b-I_1-I_\\mathrm{in}.\n  \\]\n- The gate-source voltage of \\(M_2\\) (and therefore \\(V_\\mathrm{out}\\)) is set by this current:\n  \\[\n  V_\\mathrm{out}=V_{DD}-V_{SG2}(I_{D2}).\n  \\]\n\n## Small-Signal Analysis\nLet \\(v_x\\) and \\(v_y=v_\\mathrm{out}\\) be the small-signal voltages at nodes \\(X\\) and \\(Y\\), respectively, and let \\(i_\\mathrm{in}\\) be the small-signal component of the input current. Using the standard hybrid-\\(\\pi\\) model for both the NMOS and PMOS devices the nodal equations are\n\n**Node \\(X\\)**:\n\\[\n(-g_{m2}+g_{ds1})v_y-(g_{m1}+g_{ds1}+g_{ds2})v_x+i_\\mathrm{in}=0\n\\]\n\n**Node \\(Y\\)** (open-circuit output):\n\\[\ni_{d1}=0\\quad\\Rightarrow\\quad v_x=\\frac{g_{ds1}}{g_{m1}+g_{ds1}}v_y.\n\\]\n\nSubstituting the second relation into the first and solving for the transfer function produces the **transimpedance**\n\\[\nR_m=\\frac{v_\\mathrm{out}}{i_\\mathrm{in}}=\\frac{1}{g_{m2}+\\dfrac{g_{ds1}g_{ds2}}{g_{m1}+g_{ds1}}}\\approx\\frac{1}{g_{m2}}.\n\\]\n\nThe same equations give the **input resistance** seen by \\(I_\\mathrm{in}\\):\n\\[\nr_\\mathrm{in}=\\frac{v_x}{i_\\mathrm{in}}=\\frac{g_{ds1}}{(g_{m1}+g_{ds1})g_{m2}+g_{ds1}g_{ds2}}\\approx\\frac{1}{g_{m1}g_{m2}r_{o1}},\n\\]\nwhich is extremely low (shunt-shunt feedback).\n\nFinally, driving the output node with a test source (while \\(i_\\mathrm{in}=0\\)) yields the **output resistance**\n\\[\nr_\\mathrm{out}=\\frac{v_y}{i_t}=\\frac{g_{m1}+g_{ds1}+g_{ds2}}{g_{m1}g_{m2}+g_{ds1}(g_{m2}+g_{ds2})}\\approx\\frac{1}{g_{m2}}.\n\\]\n\n## Summary of Circuit Properties\n| Parameter       | Expression (exact)                                      | Dominant approximation |\n|-----------------|---------------------------------------------------------|------------------------|\n| Transimpedance  | \\(1\\big/\\bigl(g_{m2}+g_{ds1}g_{ds2}/(g_{m1}+g_{ds1})\\bigr)\\) | \\(1/g_{m2}\\)          |\n| Input resistance| \\(g_{ds1}\\big/\\bigl[(g_{m1}+g_{ds1})g_{m2}+g_{ds1}g_{ds2}\\bigr]\\) | \\(1/(g_{m1}g_{m2}r_{o1})\\) |\n| Output resistance| \\((g_{m1}+g_{ds1}+g_{ds2})\\big/\\bigl[g_{m1}g_{m2}+g_{ds1}(g_{m2}+g_{ds2})\\bigr]\\) | \\(1/g_{m2}\\)       |\n\nThe circuit therefore realises a low-input-impedance, moderate-gain current-to-voltage converter whose gain and output resistance are both set by the transconductance of the PMOS device \\(M_2\\).",
        "format": "markdown",
        "sha256": "99d361e5d83d602f5c264489dc53c260c33a92a267a5206ceec2e8edcd2564d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS input device and M2 as the PMOS providing Vout-controlled feedback to the input node. The small-signal results give the expected very low input resistance and transimpedance and output resistance of approximately 1/gm2; the FVF label and extra DC discussion do not undermine the core analysis.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2047,
        "output_tokens": 13784,
        "total_tokens": 15831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12669,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2047,
        "output_tokens": 13784,
        "total_tokens": 15831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12669,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator (odd number of inverting stages in a closed loop).  \n\nEach stage delay is set by the time required to charge/discharge its load capacitor \\(C_L\\). For any finite \\(C_L\\) the delay is finite, the loop phase shift is \\(180^\\circ\\) at a non-zero frequency, and the circuit therefore oscillates.  \n\nAs \\(C_L\\to\\infty\\) the oscillation frequency simply tends to zero; the circuit never ceases to satisfy the oscillation condition.  \n\nHence the answer is **no**.  \n\nFinal answer: no",
        "format": "markdown",
        "sha256": "87f8d7253ec484036df5086365d86fd856802bcdba379e36f9edb7c404c19377"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency as the capacitors grow, supported by the valid delay argument.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2072,
        "output_tokens": 745,
        "total_tokens": 2817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 623,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2072,
        "output_tokens": 745,
        "total_tokens": 2817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 623,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator (odd number of inverting stages closed in a loop).  \n\nEach stage contributes a finite propagation delay \\(t_p \\propto C_L\\). The resulting oscillation period is therefore  \n\\[\nT = 6t_p \\propto C_L.\n\\]  \nAs the three load capacitors become arbitrarily large (but still finite), \\(T\\) becomes arbitrarily long and the oscillation frequency approaches zero, yet a periodic waveform continues to exist. Only in the mathematical limit \\(C_L\\to\\infty\\) does the frequency reach exactly zero; for every finite value the circuit still oscillates.  \n\nHence the circuit does **not** fail to oscillate.\n\nFinal answer: No",
        "format": "markdown",
        "sha256": "8d778ec136d3cf3dda5574fd9049ed9d14352de6cc09aebe357c747e02c4f31e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency as the three capacitors increase, supported by the delay-scaling argument. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2072,
        "output_tokens": 742,
        "total_tokens": 2814,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 597,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2072,
        "output_tokens": 742,
        "total_tokens": 2814,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 597,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a classic 3-stage ring oscillator (odd number of inverting stages with the output fed back to the input).  \n\nEach inverter contributes a propagation delay \\(t_d \\propto C_L\\). The resulting oscillation frequency is therefore  \n\\[\nf_{\\text{osc}} = \\frac{1}{6t_d} \\propto \\frac{1}{C_L}.\n\\]  \nAs the three load capacitors become arbitrarily large, \\(f_{\\text{osc}}\\) approaches zero, but the circuit continues to satisfy the Barkhausen criterion (loop gain \\(>1\\) at a frequency where the total phase shift is \\(180^\\circ\\)) for any finite \\(C_L\\). Consequently the circuit never ceases to oscillate.\n\nFinal answer: no",
        "format": "markdown",
        "sha256": "650007792ac7039aabb88c14a2aedfc8dea73f0454706133772bf6e8cc944943"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring keeps oscillating at a lower frequency: the delay argument gives f ∝ 1/CL, matching the golden solution’s full-credit rule.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2072,
        "output_tokens": 1025,
        "total_tokens": 3097,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 864,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2072,
        "output_tokens": 1025,
        "total_tokens": 3097,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 864,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator. The oscillation frequency is set by the per-stage delay, with\n\\[\nf_0 \\propto \\frac{1}{C_L}.\n\\]\nDoubling every load capacitor therefore halves \\(f_0\\).\n\nBecause each capacitor is charged and discharged once per cycle, the power drawn from the supply is\n\\[\nP = 3\\,C_L V_{DD}^2 f_0.\n\\]\nAfter the capacitors are doubled, \\(C_L\\to 2C_L\\) and \\(f_0\\to f_0/2\\), so \\(P\\) remains unchanged.\n\nA general expression for the phase noise of a ring oscillator (valid for both the linear time-invariant and the linear time-variant treatments) has the form\n\\[\n\\mathcal{L}\\{\\Delta\\omega\\}\\propto\\Bigl(\\frac{f_0}{\\Delta\\omega}\\Bigr)^2\\frac{kT}{P}.\n\\]\nWith \\(P\\) fixed and \\(f_0\\) halved, the phase-noise spectral density therefore falls by a factor of four, i.e. it improves by \\(6\\,\\mathrm{dB}\\).\n\n(The same conclusion is reached from the Hajimiri ISF formula: \\(q_{\\max}\\propto C_L\\) doubles while the normalized waveform shape—and therefore \\(\\Gamma_{\\mathrm{rms}}\\)—stays identical, again yielding a \\(6\\,\\mathrm{dB}\\) improvement.)\n\nFinal answer: improves by 6 dB (×1/4)",
        "format": "markdown",
        "sha256": "f571b9726656fd4db8d74d929c21dbb704cbd8a601dd7aab7584bd27ee11180d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and that phase noise at a fixed offset falls by a factor of four (6 dB), with a supporting explanation.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2070,
        "output_tokens": 2847,
        "total_tokens": 4917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2070,
        "output_tokens": 2847,
        "total_tokens": 4917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator. Doubling all three load capacitors \\(C_L\\) (with the inverters unchanged) has the following effects:\n\n- The delay per stage doubles, so the oscillation frequency is halved (\\(f_0 \\to f_0/2\\)).\n- The power dissipation \\(P \\propto f_0 C_L V_{DD}^2\\) remains unchanged.\n\nFrom the linear time-variant phase noise model,\n\\[\n\\mathcal{L}\\{\\Delta\\omega\\} \\propto \\frac{\\overline{i_n^2}/\\Delta f}{q_{\\max}^2 (\\Delta\\omega)^2},\n\\]\nwhere \\(q_{\\max} \\propto C_L V_{DD}\\). With the transistors (and thus the noise current spectral density) unchanged, doubling \\(C_L\\) quadruples \\(q_{\\max}^2\\).\n\nEquivalently, using the expression\n\\[\n\\mathcal{L}\\{\\Delta\\omega\\} \\propto \\frac{1}{P}\\left(\\frac{f_0}{\\Delta\\omega}\\right)^2\n\\]\n(with \\(P\\) fixed) again shows that \\(\\mathcal{L}\\) falls by a factor of 4.\n\nThus, the phase noise decreases by \\(6\\,\\text{dB}\\).\n\nFinal answer: decreases by 6 dB",
        "format": "markdown",
        "sha256": "e8bca4106434f2f328cd4a20b9467650009a98072acc52bef7ff0ec1d53e42b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling the capacitors halves the oscillation frequency and reduces phase noise by a factor of four (6 dB) at a fixed offset, with supporting reasoning.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2070,
        "output_tokens": 2696,
        "total_tokens": 4766,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2419,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2070,
        "output_tokens": 2696,
        "total_tokens": 4766,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2419,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a 3-stage ring oscillator.\n\nThe stage delay is \\(t_d \\propto C_L\\), so doubling all three load capacitors halves the oscillation frequency \\(f_0\\).\n\nThe period jitter follows from the \\(kT/C\\) noise on each capacitor converted through the stage slew rate:\n\\[\n\\sigma_T^2 \\propto C_L.\n\\]\nThus doubling \\(C_L\\) doubles \\(\\sigma_T^2\\).\n\nPhase noise (white-noise regime) is related to period jitter by\n\\[\n\\mathcal{L}(\\Delta f)\\propto\\sigma_T^2\\,f_0^3.\n\\]\nSubstituting the changes \\(C_L\\to 2C_L\\) (i.e., \\(\\sigma_T^2\\to 2\\sigma_T^2\\) and \\(f_0\\to f_0/2\\)) yields\n\\[\n\\mathcal{L}(\\Delta f)\\to\\frac14\\mathcal{L}(\\Delta f).\n\\]\nHence the phase-noise spectrum is reduced by \\(6\\,\\mathrm{dB}\\).\n\n(The same factor is obtained from the Hajimiri charge-based expression \\(\\mathcal{L}\\propto\\overline{i_n^2}/q_{\\max}^2\\), because \\(q_{\\max}=C_LV_{\\mathrm{swing}}\\) doubles while the device noise current remains unchanged.)\n\nFinal answer: \\(6\\mathrm{dB}\\) lower (\\(\\div 4\\))",
        "format": "markdown",
        "sha256": "b638d2a241ed4631efd4650affb61b0422a54c39a08d360eceffcc7f18544173"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling the capacitors halves the oscillation frequency and lowers phase noise by a factor of four (6 dB) at a fixed offset. The charge-based justification is consistent with the golden solution.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2070,
        "output_tokens": 6038,
        "total_tokens": 8108,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2070,
        "output_tokens": 6038,
        "total_tokens": 8108,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator. For oscillation to occur, the circuit must be biased at the unstable equilibrium point at which each inverter output sits at the middle of its transfer characteristic. Linearizing about this point yields a loop gain\n\\[\nL(s)=-\\frac{A^{3}}{(1+s/\\omega_{1})(1+s/\\omega_{2})(1+s/\\omega_{3})},\n\\]\nwhere \\(A=g_{m}r_{o}\\gg1\\) is the DC gain of each inverter and the three poles are set by the capacitances present at the three nodes.\n\nThe closed-loop characteristic equation is therefore the cubic\n\\[\ns^{3}+a s^{2}+b s+c=0\n\\]\nwith positive coefficients\n\\[\n\\begin{align*}\na&=\\omega_{1}+\\omega_{2}+\\omega_{3},\\\\\nb&=\\omega_{1}\\omega_{2}+\\omega_{1}\\omega_{3}+\\omega_{2}\\omega_{3},\\\\\nc&=(1+A^{3})\\omega_{1}\\omega_{2}\\omega_{3}.\n\\end{align*}\n\\]\nRouth–Hurwitz stability requires \\(ab>c\\). When the load capacitor becomes arbitrarily large, \\(\\omega_{1}=1/(r_{o}C_{L})\\to0\\) while \\(\\omega_{2}\\) and \\(\\omega_{3}\\) (set by the parasitic capacitances of the other two nodes) remain finite. In that limit\n\\[\nab-c\\;\\to\\;\\omega_{2}\\omega_{3}(\\omega_{2}+\\omega_{3})>0,\n\\]\nso the inequality \\(ab>c\\) is satisfied and all three roots lie in the open left half-plane. Consequently the equilibrium point is stable and the circuit fails to oscillate.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "3ffd3a5710af4f39ac74bf237bf74f89344f455aa404c60cebb4876254601071"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that a sufficiently large one-node load suppresses oscillation and explains it by the loaded pole tending to zero; the Routh-Hurwitz analysis supports a stable linearized equilibrium for sufficiently large finite CL. The exact infinite-load limit has a pole at zero, a minor boundary nuance that does not change the answer.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1951,
        "output_tokens": 4540,
        "total_tokens": 6491,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1951,
        "output_tokens": 4540,
        "total_tokens": 6491,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of **three inverters** connected in a ring (odd number of stages), with load capacitance \\(C_L\\) at one intermediate node.\n\n- At DC, each inverter contributes \\(180^\\circ\\) of phase shift. The total phase shift around the loop is therefore \\(540^\\circ \\equiv 180^\\circ\\), corresponding to **negative feedback**.\n- The only DC equilibrium point is the metastable point at which every node sits at the inverter threshold \\(V_M\\).\n\n**Oscillation analysis (Barkhausen):**\n- For the loop gain to satisfy the Barkhausen criterion (magnitude \\(= 1\\) and phase \\(= 0^\\circ \\bmod 360^\\circ\\)), the circuit poles must supply an **additional** \\(180^\\circ\\) of phase lag.\n- With comparable capacitances at all nodes there are three poles; they readily produce the required \\(180^\\circ\\) lag while the loop gain is still greater than unity, so the circuit oscillates.\n- When \\(C_L \\to \\infty\\) the pole associated with \\(C_L\\) becomes dominant and the other two poles move to very high frequency. At the frequency where the loop-gain magnitude falls to unity the excess phase contributed by the poles is only \\(\\approx 90^\\circ\\). The total loop phase is then \\(180^\\circ + 90^\\circ = 270^\\circ \\neq 0^\\circ \\bmod 360^\\circ\\).\n\nConsequently the Barkhausen criterion is never met. The circuit behaves as a single-pole negative-feedback system and is **stable**; all nodes settle to \\(V_M\\) and oscillation ceases.\n\nThus the circuit **does fail to oscillate** once \\(C_L\\) is made arbitrarily large.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "452eade3b171f0bb3e00cb432584b845f03d803f326c74a6aa223899b1b93aef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large capacitance on one node can stop oscillation and identifies the dominant low-frequency pole as preventing the Barkhausen condition. The extra phase and DC-state details are secondary to this correct explanation.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1951,
        "output_tokens": 2317,
        "total_tokens": 4268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1950,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1951,
        "output_tokens": 2317,
        "total_tokens": 4268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1950,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator (odd number of inverters), with the load capacitance \\(C_L\\) appearing at the output of the first stage.\n\nEach inverter may be modeled for small-signal purposes as having a DC gain of \\(-A\\) (\\(A > 1\\)) and a single pole. The loop gain is therefore\n\\[\nT(s) = -\\frac{A^3}{(1 + s/\\omega_1)(1 + s/\\omega_L)(1 + s/\\omega_3)},\n\\]\nwhere \\(\\omega_L = 1/(R_o C_L)\\) is the pole associated with the explicit load capacitor.\n\nBarkhausen’s criterion requires \\(T(j\\omega) = 1\\) at the oscillation frequency. Because the three poles can contribute a total phase of \\(180^\\circ\\), a solution for \\(\\omega\\) exists when \\(C_L\\) is modest. When \\(C_L\\) becomes arbitrarily large, however, \\(\\omega_L \\to 0\\). Any frequency at which the two remaining poles can supply the extra \\(90^\\circ\\) of phase needed for a total phase shift of \\(180^\\circ\\) then lies far above \\(\\omega_L\\). At that frequency the magnitude contributed by the slow pole is\n\\[\n\\biggl|\\frac{1}{1 + j\\omega/\\omega_L}\\biggr| \\approx \\frac{\\omega_L}{\\omega} \\ll 1.\n\\]\nConsequently \\(|T(j\\omega)| < 1\\) for every \\(\\omega\\) that satisfies the phase condition, and the Barkhausen criterion cannot be met.\n\nThus the circuit ceases to oscillate once \\(C_L\\) exceeds a finite threshold set by the inverter gain \\(A\\) and the parasitic capacitances of the other two stages.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "ece42b92eef7594040386f967f7983e2dbcbf558cb7889e92c77453e824e2da4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large load capacitance can stop oscillation and explains that its dominant low-frequency pole causes gain roll-off so the Barkhausen condition cannot be met.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 1951,
        "output_tokens": 2989,
        "total_tokens": 4940,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2606,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 1951,
        "output_tokens": 2989,
        "total_tokens": 4940,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2606,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a 3-stage CMOS ring oscillator.\n\nDoubling all device widths (\\(W_n\\) and \\(W_p\\)) has the following effects:\n- All capacitances (gate, diffusion, interconnect) double, so the load capacitance \\(C_L\\) at each node doubles.\n- The drive current of every inverter also doubles.\n- Consequently the per-stage delay \\(t_d \\propto C_L V_{DD}/I_D\\) (and therefore the oscillation frequency \\(f_0\\)) remains unchanged.\n- Power dissipation \\(P = V_{DD} \\cdot I_{\\rm avg}\\) doubles.\n\nFrom the linear time-variant (Hajimiri) phase-noise model\n\\[\n\\mathcal{L}\\{\\Delta\\omega\\}=10\\log\\left(\\frac{\\Gamma_{\\rm rms}^2}{q_{\\rm max}^2}\\cdot\\frac{\\overline{i_n^2}/\\Delta f}{2\\,\\Delta\\omega^2}\\right),\n\\]\n- \\(q_{\\rm max}=C_L V_{\\rm swing}\\) doubles \\(\\Rightarrow q_{\\rm max}^2\\) quadruples,\n- the white-noise current PSD of each MOSFET \\(\\overline{i_n^2}/\\Delta f\\propto g_m\\propto W\\) doubles,\n- the impulse-sensitivity function \\(\\Gamma\\) is unchanged (waveforms simply scale).\n\nHence the argument of the logarithm is halved and the phase noise improves by \\(3\\,\\rm dB\\).\n\n(The same conclusion is reached by viewing the enlarged oscillator as two identical copies placed in parallel: signal charge adds coherently while uncorrelated noise powers add, again yielding a \\(3\\,\\rm dB\\) improvement.)\n\nFinal answer: decreases by 3 dB",
        "format": "markdown",
        "sha256": "bc2d388ee8dac9214c881e92bdd30c0fb529e31e6cdfaa336ebc134eb7aba92d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes a 3 dB phase-noise reduction and supports it with the correct scaling: signal charge grows by 2 while white-noise current power grows by 2. The interconnect-capacitance claim is a minor imprecision and does not change the result.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2687,
        "output_tokens": 2002,
        "total_tokens": 4689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1642,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2687,
        "output_tokens": 2002,
        "total_tokens": 4689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1642,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage CMOS ring oscillator. Doubling all device widths leaves the oscillation frequency unchanged, because both the drive current of each inverter and the load capacitance that it must charge/discharge double, leaving the delay per stage unaltered.\n\nThe single-sideband phase noise of a ring oscillator is described by\n\\[\n\\mathcal{L}\\{\\Delta\\omega\\}=\\frac{\\Gamma_{\\rm rms}^{2}}{q_{\\rm max}^{2}}\\frac{\\overline{i_{n}^{2}}/\\Delta f}{2(\\Delta\\omega)^{2}}.\n\\]\n- \\(q_{\\rm max}=C\\cdot V_{\\rm swing}\\) doubles because \\(C\\) doubles while the voltage swing remains \\(V_{DD}\\).\n- The mean-square noise current \\(\\overline{i_{n}^{2}}/\\Delta f\\) also doubles (every transistor’s \\(g_{m}\\) doubles).\n- The impulse-sensitivity function \\(\\Gamma\\) is unchanged because the normalized waveform shape is identical.\n\nConsequently the ratio \\(\\overline{i_{n}^{2}}/q_{\\rm max}^{2}\\) is halved and the phase noise improves by \\(3\\,\\mathrm{dB}\\).\n\nFinal answer: improves by 3 dB",
        "format": "markdown",
        "sha256": "692e7583b17cb34f031e2fba17bb07f82a63b42dd509bb4a7046fcc36e144c4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes a 3 dB phase-noise reduction and gives a sound scaling argument: charge swing doubles while noise-current power doubles, halving their ratio.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2687,
        "output_tokens": 1424,
        "total_tokens": 4111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2687,
        "output_tokens": 1424,
        "total_tokens": 4111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a 3-stage CMOS ring oscillator.\n\n**Effect of doubling all device widths:**\n- Load capacitance at each node (\\(C_L\\)) doubles (due to doubled gate and diffusion capacitances).\n- Drive current of each inverter also doubles.\n- Thus, stage delay \\(\\tau \\propto C_L V_{DD}/I\\) (and hence \\(f_{\\text{osc}}\\)) remains **unchanged**.\n- Power dissipation doubles.\n\n**Phase noise analysis** (using the Hajimiri ISF framework):\n\\[\n\\mathcal{L}\\{\\Delta\\omega\\} \\propto \\frac{\\Gamma_{\\rm rms}^2}{q_{\\rm max}^2} \\cdot \\overline{i_n^2/\\Delta f}\n\\]\n- Maximum charge swing \\(q_{\\rm max} = C_L V_{DD}\\) **doubles** \\(\\implies q_{\\rm max}^2\\) increases by \\(4\\times\\).\n- Transistor noise current PSD \\(\\overline{i_n^2/\\Delta f} \\propto g_m\\) **doubles** (since \\(g_m \\propto W\\)).\n- Waveform shape (and thus \\(\\Gamma_{\\rm rms}\\)) is unchanged.\n\nTherefore, \\(\\mathcal{L}\\{\\Delta\\omega\\}\\) **halves** (improves by \\(3\\,\\text{dB}\\)).\n\nFinal answer: decreases \\(3\\,\\text{dB}\\)",
        "format": "markdown",
        "sha256": "6080e5a786ad3891ab4a08873e164ef481f66a11a4143112497c8fcc617a9cfa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes a 3 dB phase-noise reduction and gives the valid scaling: capacitance and signal charge double, while device noise-current PSD doubles, leaving the noise-to-signal ratio halved.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2687,
        "output_tokens": 1844,
        "total_tokens": 4531,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1549,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2687,
        "output_tokens": 1844,
        "total_tokens": 4531,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1549,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The three-stage ring oscillator has a single DC equilibrium point (unstable) at which the input and output voltages of every inverter are identical and equal to the switching threshold \\(V_M \\approx V_{DD}/2\\). At this bias point both the NMOS and the PMOS device of every inverter are in saturation and may be replaced by their small-signal models.\n\nBecause of the complete symmetry of the circuit with respect to the common supply node, a small-signal test voltage \\(v_\\text{test}\\) applied at that node produces identical voltages at the three internal nodes. Consequently each inverter appears as a diode-connected NMOS in series with a diode-connected PMOS:\n\n\\[\nR_\\text{inv}=\\frac{1}{g_{mN}}+\\frac{1}{g_{mP}}\n\\]\n\n(channel-length modulation neglected). The three identical branches are connected in parallel between the supply node and ground, so the resistance seen looking into the supply is\n\n\\[\nR_X=\\frac{1}{3}\\left(\\frac{1}{g_{mN}}+\\frac{1}{g_{mP}}\\right).\n\\]\n\n(If the inverters are ratioed for \\(g_{mN}=g_{mP}=g_m\\), this expression reduces to the compact result \\(R_X=2/(3g_m)\\).)\n\nFinal answer: \\(\\dfrac{1}{3}(1/g_{mN}+1/g_{mP})\\)",
        "format": "markdown",
        "sha256": "b1d470950ed05b1f6445fb80a533047159e67091f23e489ef5fbb736613958f2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The derivation is internally consistent for a static symmetric bias point, but it ignores the oscillator’s charging and discharging of the load capacitances, which dominates the supply resistance. The golden solution specifically assigns this static gm-based answer a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2683,
        "output_tokens": 7262,
        "total_tokens": 9945,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6947,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2683,
        "output_tokens": 7262,
        "total_tokens": 9945,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6947,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator consisting of CMOS inverters. The DC operating point of the oscillator (although unstable) occurs when each inverter is biased at its switching threshold, so that \\(V_{\\text{in}}=V_{\\text{out}}=V_{M}\\) for every stage.\n\nA small-signal voltage \\(v_{x}\\) applied to the common supply node therefore appears as a common-mode excitation. By symmetry of the ring, the small-signal voltages at the three internal nodes are identical; call this common voltage \\(v_{y}\\). Consequently every inverter operates with\n\\[\nv_{\\text{gs},n}=v_{y},\\qquad v_{\\text{sg},p}=v_{x}-v_{y}.\n\\]\n\nNeglecting channel-length modulation, the drain currents are\n\\[\ni_{d,n}=g_{mn}v_{y},\\qquad i_{d,p}=g_{mp}(v_{y}-v_{x}).\n\\]\nKCL at an internal node requires \\(i_{d,n}+i_{d,p}=0\\), which immediately yields\n\\[\nv_{y}=\\frac{g_{mp}}{g_{mn}+g_{mp}}v_{x}.\n\\]\nThe current drawn from the supply by one inverter is therefore\n\\[\ni_{x1}=-i_{d,p}=\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}v_{x}.\n\\]\n(The same result follows from viewing each stage as a diode-connected CMOS inverter: the NMOS contributes a resistance \\(1/g_{mn}\\) to ground while the PMOS contributes a resistance \\(1/g_{mp}\\) to the supply; the two resistances appear in series.)\n\nBecause the three identical stages are attached to the same supply node, the total supply current is \\(3i_{x1}\\). The small-signal resistance looking into the supply is consequently\n\\[\nR_{X}=\\frac{v_{x}}{3i_{x1}}=\\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right).\n\\]\n\nFinal answer: \\(\\dfrac{1}{3}\\left(\\dfrac{1}{g_{mn}}+\\dfrac{1}{g_{mp}}\\right)\\)",
        "format": "markdown",
        "sha256": "f32835765ba9440a1662bcde09efbb5cf4a6b2ef6b91b5264f0268dc5da41bcc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The derivation is internally consistent for a static gm-based model, but it ignores the oscillation-driven charging and discharging of the load capacitances that sets the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2683,
        "output_tokens": 7198,
        "total_tokens": 9881,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2683,
        "output_tokens": 7198,
        "total_tokens": 9881,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The three-stage ring oscillator is biased at its unique DC equilibrium point, where the input and output voltage of each CMOS inverter equal the switching threshold \\(V_{M}\\). (For a symmetric CMOS inverter, \\(V_{M}=V_{DD}/2\\).) At this bias point every transistor operates in saturation.\n\nBecause the circuit (and the excitation applied to the common supply node) is rotationally symmetric, the three internal node voltages remain identical to one another when a small-signal test voltage \\(v_{x}\\) is applied to the supply. Consequently it is sufficient to analyze a single inverter whose input and output voltages are constrained to be equal and then to multiply the resulting supply current by three.\n\nWith channel-length modulation neglected, KCL at the output node of one inverter reduces to\n\\[\ng_{m p}(v_{x}-v)=g_{m n}v.\n\\]\nSolving for the common node voltage yields\n\\[\nv=\\frac{g_{m p}}{g_{m n}+g_{m p}}v_{x}.\n\\]\nThe current drawn from the supply by that inverter is therefore\n\\[\ni=g_{m p}(v_{x}-v)=\\bigl(g_{m n}\\parallel g_{m p}\\bigr)v_{x}.\n\\]\nThe three identical stages contribute three times this current, so the conductance seen at the supply node is\n\\[\nG_{x}=3(g_{m n}\\parallel g_{m p}).\n\\]\nWhen the NMOS and PMOS devices are matched, \\(g_{m n}=g_{m p}=g_{m}\\) and the expression simplifies to\n\\[\nR_{x}=\\frac{1}{G_{x}}=\\frac{2}{3g_{m}}.\n\\]\n\n(The same leading-order result is obtained when the transistor output conductances are retained; they appear only as higher-order corrections.)\n\nFinal answer: \\(\\dfrac{2}{3g_{m}}\\)",
        "format": "markdown",
        "sha256": "ae8e34579b04085beb49dac23a272717c7d7c110db1175ad4dee8b34410f8909"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance and ignores the oscillation-driven charging and discharging of the load capacitances, which sets the resistance seen at the supply. The golden solution specifically assigns this internally consistent static analysis a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2683,
        "output_tokens": 9743,
        "total_tokens": 12426,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2683,
        "output_tokens": 9743,
        "total_tokens": 12426,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given expression for \\(R_X\\) is the low-frequency small-signal resistance obtained by linearizing about the unstable DC equilibrium point of the ring (all inverter inputs/outputs sitting at the switching threshold \\(V_M\\)).\n\nAt that particular bias point every inverter has \\(v_{\\text{in}}=v_{\\text{out}}\\), so each CMOS pair appears as a series connection of two diode-connected devices. With three identical stages in parallel one therefore obtains\n\\[\nR_X\\simeq\\frac13\\Bigl(\\frac1{g_{m n}}+\\frac1{g_{m p}}\\Bigr).\n\\]\n\nWhen the circuit is allowed to oscillate the large-signal trajectories never remain near this equilibrium. Each node swings essentially rail-to-rail, the transistors spend most of the cycle in cutoff or triode, and the instantaneous conductance looking into the common supply node is completely different from the diode-connected value. Consequently the effective (average or incremental) resistance seen at the supply is no longer given by the expression above.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "3d38625438a84dad27e561a1881d4ef72c941e41b330529edf8424e5d50e8f7f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that the static small-signal expression does not describe the oscillating circuit, but omits the capacitive charging mechanism and the key conclusion that RX remains on the order of the MOS on-resistance rather than becoming much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2766,
        "output_tokens": 3664,
        "total_tokens": 6430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3447,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2766,
        "output_tokens": 3664,
        "total_tokens": 6430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3447,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given expression for \\(R_X\\) is the **low-frequency small-signal resistance** obtained by linearizing about the unique DC equilibrium point of the ring. At that point every inverter sits at its switching threshold (\\(V_{\\text{in}}=V_{\\text{out}}=V_M\\)), so each stage appears as a diode-connected PMOS in series with a diode-connected NMOS and the three identical branches stand in parallel:\n\n\\[\nR_X=\\frac13\\Bigl(\\frac1{g_{m n}}+\\frac1{g_{m p}}\\Bigr).\n\\]\n\nWhen the circuit oscillates the internal nodes execute a large-signal periodic orbit. Consequently:\n\n- the instantaneous operating point of every transistor continuously traverses cutoff, saturation and triode regions;\n- \\(V_{\\text{in}}(t)\\neq V_{\\text{out}}(t)\\) at almost every instant, destroying the diode-connected topology that underlies the expression above;\n- the current drawn from the supply is a train of narrow charging pulses whose average value (and whose derivative with respect to \\(V_{DD}\\)) is set by \\(CV_{DD}f_{\\text{osc}}\\) rather than by the bias current of the metastable point.\n\nBoth the large-signal average resistance \\(V_{DD}/I_{\\text{avg}}\\) and the small-signal resistance \\(\\partial V_{DD}/\\partial I_{\\text{avg}}\\) that would be measured while the oscillator is running are therefore numerically different from the formula that was written for the DC equilibrium. In short, the answer changes as soon as the circuit leaves the metastable point and enters steady-state oscillation.\n\nFinal answer: yes (it changes)",
        "format": "markdown",
        "sha256": "2efb89967fa14e1138a2881181ae47f7e9b6dac449f7d37bac445e1df8fa7cfb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the capacitive switching-current mechanism, but does not derive the corresponding resistance or show that its magnitude remains on the order of the MOS on-resistance. Its claim that the resistance is simply numerically different misses the key magnitude conclusion.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2766,
        "output_tokens": 5243,
        "total_tokens": 8009,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4896,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2766,
        "output_tokens": 5243,
        "total_tokens": 8009,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4896,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given expression for \\(R_X\\) is derived under the assumption that the ring is biased at its DC equilibrium point (all inverter input/output nodes at the switching threshold \\(V_M\\)). At this point, symmetry forces every inverter into a common-mode condition \\(v_{\\text{in}}=v_{\\text{out}}\\). Consequently each CMOS inverter appears as a diode-connected NMOS device in series with a diode-connected PMOS device, the three identical branches stand in parallel, and\n\\[\nR_X\\simeq\\frac13\\Bigl(\\frac1{g_{m n}}+\\frac1{g_{m p}}\\Bigr).\n\\]\n\nWhen the same circuit oscillates the internal nodes execute large voltage excursions. The transistors therefore spend the great majority of each period in the cutoff or triode regions rather than in the saturated, diode-connected condition used above. The time-averaged conductance seen at the supply pin is consequently set by dynamic charging currents (\\(CV_{DD}f\\)) and by the brief crow-bar intervals that occur during switching; both contributions differ numerically from the small-signal value computed at the metastable point. Hence the expression for \\(R_X\\) changes.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "dc1c8dc326216c563d617a214f9b7f3cd9c96500e7efdedeaf18dd4523fa8edf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that oscillation introduces dynamic capacitive charging currents, but does not derive the resulting resistance or establish that it remains on the order of the MOS on-resistance. Its emphasis on devices being off for most of the cycle risks implying the incorrect conclusion that the resistance becomes much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2766,
        "output_tokens": 2594,
        "total_tokens": 5360,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2345,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2766,
        "output_tokens": 2594,
        "total_tokens": 5360,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2345,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch (clocked comparator). In the evaluation phase (\\(\\mathrm{CK}\\) high), \\(M_7\\) acts as a tail current source that enables an initial integration interval. During this interval the differential pair \\(M_1\\)-\\(M_2\\) converts the input voltage difference into a growing differential voltage at the intermediate nodes while the common-mode level falls.\n\nThe voltage gain realized in the integration interval is\n\\[\nA_v=\\frac{g_{m1,2}}{C}\\,t_{\\mathrm{int}},\n\\]\nwhere the integration time itself is set by the rate at which the common-mode voltage must drop to the threshold of the cross-coupled pair:\n\\[\nt_{\\mathrm{int}}\\propto\\frac{C\\cdot V_{\\mathrm{th}}}{I_{D7}}.\n\\]\nBecause \\(g_{m1,2}\\propto\\sqrt{I_{D7}}\\) while \\(t_{\\mathrm{int}}\\propto 1/I_{D7}\\), the product scales as\n\\[\nA_v\\propto\\frac{1}{\\sqrt{I_{D7}}}.\n\\]\nIncreasing the width of \\(M_7\\) raises \\(I_{D7}\\) and therefore reduces the initial voltage gain.\n\nFinal answer: decreases",
        "format": "markdown",
        "sha256": "fb7f026ee655b248b9a0432afecf1cf9f13feccf0492228bc12d4d890e0e9790"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that widening M7 increases tail current and decreases initial gain. The integration-time and transconductance scaling gives a consistent 1/√I_D7 trend, matching the golden solution.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2708,
        "output_tokens": 1599,
        "total_tokens": 4307,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1333,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2708,
        "output_tokens": 1599,
        "total_tokens": 4307,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1333,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch (dynamic comparator). During the evaluation phase (\\(\\mathrm{CK}\\) high), \\(M_7\\) acts as a tail current source that sets the common-mode discharge current of nodes \\(P\\)/\\(Q\\) (and subsequently \\(X\\)/\\(Y\\)).\n\n- The differential current produced by the input pair is \\(i_\\mathrm{d}=g_{m1,2}\\Delta V_\\mathrm{in}\\).\n- This current integrates on the parasitic capacitance at the intermediate nodes for a time interval \\(t_\\mathrm{int}\\) that ends when the common-mode voltage has fallen far enough for the cross-coupled regeneration pair to turn on.\n- Consequently\n  \\[\n  t_\\mathrm{int}\\propto\\frac{C}{I_{D7}}\\qquad\\Rightarrow\\qquad\n  A_{v,\\mathrm{init}}=\\frac{\\Delta V_{X,Y}}{\\Delta V_\\mathrm{in}}\\propto\\frac{g_{m1,2}}{I_{D7}}.\n  \\]\n- Because \\(g_{m1,2}\\propto\\sqrt{I_{D7}}\\) (or saturates more weakly), the ratio \\(g_m/I_D\\) falls as \\(I_{D7}\\) rises.\n- Widening \\(M_7\\) therefore increases \\(I_{D7}\\) and reduces the initial voltage gain.\n\nFinal answer: decreases",
        "format": "markdown",
        "sha256": "d1b8dee8413479647fc631fd4c55de1533d90c1918a9357c435e6a8a85ee0940"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M7 increases tail current and reduces the initial gain because gm grows more slowly than current. The explanation captures the essential trend and mechanism.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2708,
        "output_tokens": 1406,
        "total_tokens": 4114,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1117,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2708,
        "output_tokens": 1406,
        "total_tokens": 4114,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1117,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch (dynamic comparator). When \\(\\mathrm{CK}\\) rises, \\(M_7\\) turns on and nodes \\(P\\)/\\(Q\\) begin to discharge. A differential voltage \\(\\Delta V_{PQ}\\) builds up by integration until \\(P\\) and \\(Q\\) have fallen by approximately \\(V_{\\mathrm{THN}}\\), at which point the NMOS cross-coupled pair \\(M_3\\)-\\(M_4\\) turns on and regeneration begins.\n\nThe integration interval is\n\\[\nT_{\\mathrm{int}}\\approx\\frac{C_{P,Q}V_{\\mathrm{THN}}}{I_{D7}}.\n\\]\nDuring this interval the differential voltage that appears is\n\\[\n\\Delta V_{PQ}=\\frac{g_{m1,2}}{C_{P,Q}}T_{\\mathrm{int}}\\,V_{\\mathrm{in}}=\\frac{g_{m1,2}}{I_{D7}}V_{\\mathrm{THN}}\\,V_{\\mathrm{in}}.\n\\]\nHence the initial voltage gain is proportional to \\(g_m/I_D\\).\n\nIncreasing \\(W_7\\) raises the tail current \\(I_{D7}\\). For fixed \\(W_{1,2}\\) this increases the over-drive of \\(M_1\\)/\\(M_2\\), which lowers \\(g_m/I_D\\). Consequently the initial voltage gain decreases.\n\nFinal answer: decreases",
        "format": "markdown",
        "sha256": "2ef6fadf886be99c26c6e706849f7b7eb8e8f110f2cec373ef5223c928faa5ee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M7 increases tail current and decreases the initial gain because the input-pair gm/ID falls as overdrive increases.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2708,
        "output_tokens": 1653,
        "total_tokens": 4361,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1350,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2708,
        "output_tokens": 1653,
        "total_tokens": 4361,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1350,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **StrongARM latch** (dynamic comparator).\n\n**Operation relevant to the question:**\n- In the evaluation phase (\\(\\mathrm{CK}\\) high), \\(M_7\\) turns on and nodes \\(P\\) and \\(Q\\) discharge.\n- The **common-mode** discharge rate is set by the current through \\(M_1/M_2\\):\n  \\[\n  \\frac{\\mathrm{d}V_{P,Q}}{\\mathrm{d}t}\\approx-\\frac{I}{C_{P,Q}}\n  \\]\n- The time \\(t_{\\mathrm{int}}\\) required for the common-mode level at \\(P/Q\\) to drop by \\(\\sim V_{\\mathrm{TH}}\\) (so that \\(M_3/M_4\\) turn on and regeneration can begin) is therefore\n  \\[\n  t_{\\mathrm{int}}\\propto C_{P,Q}.\n  \\]\n- Simultaneously a **differential** voltage builds up by integration of the input difference:\n  \\[\n  \\Delta V_{PQ}(t)=\\frac{g_{m1,2}}{C_{P,Q}}\\Delta V_{\\mathrm{in}}\\cdot t.\n  \\]\n- Substituting the integration window \\(t=t_{\\mathrm{int}}\\) yields\n  \\[\n  \\Delta V_{PQ}=\\frac{g_{m1,2}}{I}V_{\\mathrm{TH}}\\Delta V_{\\mathrm{in}}.\n  \\]\n  The \\(C_{P,Q}\\) terms cancel, so the voltage gain of this first (integration) stage is **independent of the capacitance at \\(P\\) and \\(Q\\)**.\n\nConsequently, increasing the capacitance at nodes \\(P\\) and \\(Q\\) leaves the **initial voltage gain** unchanged.\n\nFinal answer: remains unchanged",
        "format": "markdown",
        "sha256": "f1fc0066060cf8354734b2c86410d5b3484f8bb973e2a3f5a10f59912bad160c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes the initial gain is unchanged and explains that the longer integration interval from increased capacitance cancels the reduced differential-voltage slope.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2707,
        "output_tokens": 2989,
        "total_tokens": 5696,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2707,
        "output_tokens": 2989,
        "total_tokens": 5696,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a StrongARM latch (dynamic comparator). During the evaluation phase (\\(\\mathrm{CK}\\) high), \\(M_7\\) turns on and the input pair \\(M_1/M_2\\) begins discharging the intermediate nodes \\(P\\) and \\(Q\\).\n\nThe differential voltage that develops at these nodes is\n\\[\n\\Delta V_{PQ}(t)=\\frac{g_{m1,2}}{C_{P,Q}}\\Delta V_{\\mathrm{in}}\\,t.\n\\]\nThis quantity is the **initial voltage gain** of the stage (i.e., the gain realized before the cross-coupled pair \\(M_3/M_4\\) enters regeneration).  \n\nBecause \\(\\Delta V_{PQ}\\) is inversely proportional to \\(C_{P,Q}\\), increasing the capacitance at nodes \\(P\\) and \\(Q\\) **decreases** the initial voltage gain.\n\nFinal answer: decreases",
        "format": "markdown",
        "sha256": "2f7cc692d867da11b567f4578e497815a88f0c5ac2fd746711e77eab4d4ba8ff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion. Larger capacitance reduces the differential-voltage slope, but it proportionally lengthens the amplification phase, so the capacitance cancels in the initial gain; it remains approximately unchanged. The answer identifies the slope effect but mistakes it for the gain at the onset of regeneration.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2707,
        "output_tokens": 1141,
        "total_tokens": 3848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2707,
        "output_tokens": 1141,
        "total_tokens": 3848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **StrongARM latch** (dynamic comparator).\n\n**Operation relevant to the question:**\n- When \\(\\mathrm{CK}\\) goes high, the tail device \\(M_7\\) turns on and the input pair \\(M_1/M_2\\) begins discharging nodes \\(P\\) and \\(Q\\).\n- Cross-coupled devices \\(M_3/M_4\\) remain off until the common-mode voltage at \\(P/Q\\) has fallen by approximately one threshold voltage \\(V_{\\mathrm{TH}}\\).\n- During this interval the circuit acts as a pure integrator (pre-amplifier stage).\n\n**Initial differential voltage developed at \\(P/Q\\):**\n\\[\n\\frac{\\mathrm{d}(\\Delta V_{PQ})}{\\mathrm{d}t}=\\frac{g_{m1,2}\\Delta V_{\\mathrm{in}}}{C_{P,Q}}\n\\]\nThe integration window ends when the common-mode level has dropped by \\(V_{\\mathrm{TH}}\\):\n\\[\nt_{\\mathrm{int}}=\\frac{C_{P,Q}\\cdot V_{\\mathrm{TH}}}{I_{\\mathrm{CM}}}.\n\\]\nSubstituting the expression for \\(t_{\\mathrm{int}}\\) yields\n\\[\n\\Delta V_{PQ}=(g_{m}/I_{\\mathrm{CM}})\\,V_{\\mathrm{TH}}\\,\\Delta V_{\\mathrm{in}}.\n\\]\nHence the **initial voltage gain**\n\\[\nA_{v,\\mathrm{init}}=\\frac{\\Delta V_{PQ}}{\\Delta V_{\\mathrm{in}}}=\\frac{g_{m}}{I_{\\mathrm{CM}}}V_{\\mathrm{TH}}\n\\]\nis **independent of the capacitance** at nodes \\(P\\) and \\(Q\\).\n\nIncreasing \\(C_{P}\\) and \\(C_{Q}\\) lengthens the integration time by the same factor that it reduces the slope \\(\\mathrm{d}(\\Delta V)/\\mathrm{d}t\\), leaving the product (and therefore the gain) unchanged.\n\nFinal answer: remains unchanged",
        "format": "markdown",
        "sha256": "fe0f556f2f9d678fc4734602027a8917b8333f8f5e36cebd6dc86e2de6443fdf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is independent of capacitance and explains the cancellation: added capacitance slows the differential buildup but proportionally lengthens the amplification interval.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2707,
        "output_tokens": 2498,
        "total_tokens": 5205,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2071,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2707,
        "output_tokens": 2498,
        "total_tokens": 5205,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2071,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch (dynamic comparator). In the evaluation/regeneration phase, \\(M_5\\)-\\(M_6\\) form the PMOS portion of the cross-coupled inverters that accomplish regenerative amplification of the developing differential voltage at nodes \\(X\\) and \\(Y\\).\n\nThe regeneration time constant is\n\\[\n\\tau_{\\text{reg}} \\approx \\frac{C_{X,Y}}{g_{m3,4}+g_{m5,6}}.\n\\]\nIncreasing \\(W_{5,6}\\) raises \\(g_{m5,6}\\). Although the device capacitances that contribute to \\(C_{X,Y}\\) also increase, other contributions to the nodal capacitance (precharge devices, routing, load) remain fixed. Consequently the net ratio \\(g_m/C\\) improves and \\(\\tau_{\\text{reg}}\\) shrinks, so the latch resolves faster.\n\nFinal answer: improve",
        "format": "markdown",
        "sha256": "9729881260070f07234dbffb11cb50f65cd0a41427800e43264750e6b3e4cd12"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that wider M5/M6 strengthen regeneration and improve initial speed, while noting their added capacitance. It omits that this benefit eventually diminishes or reverses at an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2707,
        "output_tokens": 2997,
        "total_tokens": 5704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2707,
        "output_tokens": 2997,
        "total_tokens": 5704,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **StrongARM latch** (dynamic comparator). Transistors \\(M_5\\) and \\(M_6\\) form the cross-coupled PMOS regenerative pair at the output nodes \\(X\\) and \\(Y\\).\n\nThe latch delay consists of\n- a brief initial discharge interval that creates a small differential voltage \\(\\Delta V_0\\) at \\(X/Y\\), followed by\n- an exponential regeneration interval whose time constant is\n\\[\n\\tau = \\frac{C_{X,Y}}{g_{mN}+g_{mP}}.\n\\]\n\nIncreasing \\(W_{5,6}\\) raises \\(g_{mP}\\). Because the fixed portion of \\(C_{X,Y}\\) (wiring, pre-charge devices, \\(M_3/M_4\\), load) is non-zero, the net \\(\\tau\\) decreases. Consequently the regeneration interval shortens and the overall comparator decision becomes faster.\n\n(The same conclusion follows from the well-known observation that simply *including* the PMOS pair already speeds up the latch relative to an NMOS-only regenerative load; further enlargement of that pair continues to reduce \\(\\tau\\).)\n\nFinal answer: improve",
        "format": "markdown",
        "sha256": "260490c8d2ce001541e4f910bb9a9222000a3d896b8bb3105e2a9bd75c3cef3f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that wider M5/M6 initially strengthen regeneration and improve speed, but incorrectly claims the benefit continues without limit. Their added capacitance eventually causes diminishing returns or can degrade speed.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2707,
        "output_tokens": 6099,
        "total_tokens": 8806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5854,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2707,
        "output_tokens": 6099,
        "total_tokens": 8806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5854,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch (dynamic comparator). In the evaluation phase (\\(CK\\) high), nodes \\(X\\) and \\(Y\\) begin at \\(V_{DD}\\). A differential input causes a differential discharge, after which regeneration occurs.\n\n- Initially both \\(M_5\\) and \\(M_6\\) are off (\\(V_{SG}=0\\)).\n- Regeneration therefore begins solely via the NMOS pair \\(M_3/M_4\\).\n- The regeneration time constant is set by \\(\\tau\\approx C_{X,Y}/g_{mN}\\).\n\nWidening \\(M_5\\) and \\(M_6\\) adds substantial drain and gate capacitance to nodes \\(X\\) and \\(Y\\) while contributing no extra \\(g_m\\) during the critical initial regeneration interval. Consequently \\(\\tau\\) increases and the latch decision becomes slower.\n\n(The PMOS devices only turn on later to restore full CMOS levels; any benefit they provide occurs after the speed-critical exponential growth has already taken place.)\n\nFinal answer: degrade",
        "format": "markdown",
        "sha256": "41b387fb2df201dc9831cdbcea2158635596c18546f358e68a4125d9466663d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer identifies added parasitic capacitance as a real eventual limitation, but reaches the wrong initial trend. Wider M5/M6 strengthen PMOS regeneration, so speed initially improves before added capacitance limits the benefit.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2707,
        "output_tokens": 2565,
        "total_tokens": 5272,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2353,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2707,
        "output_tokens": 2565,
        "total_tokens": 5272,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2353,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two C\\(^{2}\\)MOS stages in a master-slave configuration (with the output inverter completing a storage/toggle loop).\n\n- In each stage the clocked devices sit in series with the logic transistors and therefore appear directly in the pull-up and pull-down paths that drive the dynamic nodes \\(X\\) and \\(Y\\).\n- Widening those clocked transistors lowers their on-resistance. The net resistance of each charging/discharging path therefore decreases.\n- Although the diffusion capacitance contributed by the clocked devices also rises, the reduction in resistance dominates for any practical initial sizing (the fixed capacitances of the logic transistors and of the fan-out gates make the \\(RC\\) product fall). Consequently the propagation delays through both stages shrink.\n\nThe maximum clock frequency at which the circuit can still operate correctly therefore increases.\n\nFinal answer: improve",
        "format": "markdown",
        "sha256": "46ea725082e27fe61318befde618d864aaac73fd5fa6edb4afb2df3d6f316eb7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly explains the initial speed improvement from lower clocked-device on-resistance and notes the added diffusion capacitance. However, it does not recognize that this capacitance eventually limits or can reverse the benefit, and instead says delays shrink.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1962,
        "output_tokens": 6710,
        "total_tokens": 8672,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6534,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1962,
        "output_tokens": 6710,
        "total_tokens": 8672,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6534,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit is a master-slave edge-triggered flip-flop constructed from two \\(\\mathrm{C}^{2}\\mathrm{MOS}\\) stages (with opposite clock phasing) followed by a static inverter. The overall topology is connected as a toggle flip-flop.\n\n- When a stage is transparent, its clocked transistors are on and therefore appear **in series** with the logic transistors that perform the pull-up or pull-down of the dynamic nodes \\(X\\) or \\(Y\\).\n- The resistance of that series combination directly sets the charging/discharging time constant of \\(X\\) (or \\(Y\\)).\n- Widening the clocked devices lowers their on-resistance, reducing the total resistance seen by the load capacitance and thereby decreasing the stage delay.\n- The same widening also increases the diffusion capacitance attached to \\(X\\) and \\(Y\\). Because a fraction of the total load is fixed (junctions of the logic transistors plus the gate capacitance of the next stage), the reduction in resistance dominates and the net RC delay still improves.\n\nConsequently the propagation delays that limit the minimum clock period shrink, and the maximum toggle frequency of the circuit rises.\n\n**Final answer: improves**",
        "format": "markdown",
        "sha256": "1c1b070e41875c5d0e40ffbb5ef5f47435ff0a5da1a864321be200c1e4aa7b92"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that widening the series clocked devices lowers their on-resistance and initially improves speed. It notes the added node capacitance but incorrectly claims resistance continues to dominate, rather than recognizing that the added capacitance eventually limits or may reverse the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1962,
        "output_tokens": 6589,
        "total_tokens": 8551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6347,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1962,
        "output_tokens": 6589,
        "total_tokens": 8551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6347,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a master-slave edge-triggered flip-flop constructed from \\(\\mathrm{C}^{2}\\mathrm{MOS}\\) stages (with a static inverter \\(\\mathrm{Inv}_{3}\\) closing the loop to obtain the overall inversion needed for bistability).\n\n- Each \\(\\mathrm{C}^{2}\\mathrm{MOS}\\) stage is a clocked inverter: the logic transistors (the devices whose gates are driven by \\(Z\\) or \\(X\\)) are placed in series with a pair of clocked devices.\n- When a stage is transparent the two clocked transistors are on and therefore appear as series resistances in the pull-up and pull-down paths.\n- Increasing the widths of those clocked transistors lowers the series resistances, raising the effective drive strength of the stage.\n- Although the diffusion capacitance contributed by the clocked devices also grows, this capacitance is only a fraction of the total load seen at nodes \\(X\\) and \\(Y\\). The net \\(RC\\) time constant therefore decreases, reducing both the clock-to-\\(Q\\) delay and the setup time.\n\nConsequently the speed of the flip-flop **improves**.\n\nFinal answer: improve",
        "format": "markdown",
        "sha256": "9055e7600f166067c3623e6c6a293267324633ac3dcd338d8437d3e90fb5eb49"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly says widening the clocked transistors initially improves speed because it lowers their on-resistance. It notes added diffusion capacitance but does not recognize that this penalty eventually limits or can reverse the benefit, as required for full credit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 1962,
        "output_tokens": 2820,
        "total_tokens": 4782,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2585,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 1962,
        "output_tokens": 2820,
        "total_tokens": 4782,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2585,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit consists of two C\\(^{2}\\)MOS latches in a feedback loop with a static inverter:\n\n- The left stage is transparent (inverting) when \\(\\mathrm{CK}=1\\) and holds when \\(\\mathrm{CK}=0\\), producing node \\(X\\).\n- The right stage is transparent (inverting) when \\(\\mathrm{CK}=0\\) and holds when \\(\\mathrm{CK}=1\\), producing node \\(Y\\).\n- The static inverter yields \\(Z=\\overline{Y}\\), which is fed back as the input to the left stage.\n\nThis configuration implements a divide-by-2. The resulting waveforms (for a 50% duty-cycle input clock of period \\(T\\)) are:\n\n- \\(X\\) has period \\(2T\\), with transitions aligned to the rising edges of \\(\\mathrm{CK}\\).\n- \\(Y\\) has period \\(2T\\), with transitions aligned to the falling edges of \\(\\mathrm{CK}\\).\n\nA time offset of \\(T/2\\) therefore exists between \\(X\\) and \\(Y\\). Because the period of \\(X\\) and \\(Y\\) is \\(2T\\), this offset corresponds to a \\(90^\\circ\\) phase difference. Consequently the circuit produces quadrature (I/Q) outputs at half the input frequency.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "d9c03f28392076119ee8bde4c14bdf11a9ca2a130b643a2b7365907258157c0d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from the latches switching half an input period apart, but omits why quadrature is not exact: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1947,
        "output_tokens": 4411,
        "total_tokens": 6358,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4136,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1947,
        "output_tokens": 4411,
        "total_tokens": 6358,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4136,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two clocked inverting stages in a feedback loop (with \\(Z\\) fed back to the left stage input), clocked by complementary signals \\(\\mathrm{CK}\\) and \\(\\overline{\\mathrm{CK}}\\). This configuration implements a divide-by-2 toggle latch:\n\n- On the rising edge of \\(\\mathrm{CK}\\), the left stage is transparent and the right stage holds, so node \\(X\\) updates (toggles).\n- On the falling edge of \\(\\mathrm{CK}\\), the right stage is transparent and the left stage holds, so node \\(Y\\) updates (toggles). \\(Z = \\overline{Y}\\) therefore also updates on falling edges.\n\nThe resulting signals at \\(X\\) and \\(Y\\) (or equivalently \\(X\\) and \\(Z\\)) thus have frequency \\(f_{\\mathrm{CK}}/2\\). Because successive updates are separated by half a clock period, the time offset between \\(X\\) and \\(Y\\) is exactly one-quarter of the output period, i.e., the outputs are in quadrature.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "0e00be663f1ff19094cd8bd68c191e19754013d9c8e7b7949d4f3bf63a9d7287"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies nominal divide-by-two quadrature from the half-period switching offset, but incorrectly calls the phase relation exact and omits both the Inv3 delay and unequal latch loading that make it imperfect.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1947,
        "output_tokens": 3369,
        "total_tokens": 5316,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1947,
        "output_tokens": 3369,
        "total_tokens": 5316,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two opposite-clocked latches (master-slave configuration) in a feedback loop, with the inverted slave output \\(Z = \\overline{Y}\\) fed back to the master input. This is a standard divide-by-2 frequency divider.\n\n- The master latch produces node \\(X\\).\n- The slave latch produces node \\(Y\\).\n\nSince each latch is transparent for one-half of the input clock period, and the output signal period is twice the clock period, the time offset between \\(X\\) and \\(Y\\) corresponds to \\(90^\\circ\\) (quadrature) at the output frequency. (The signals \\(Y\\) and \\(Z\\) are \\(180^\\circ\\) apart by construction.)\n\nThus, the structure provides quadrature outputs.\n\n**Final answer: yes**",
        "format": "markdown",
        "sha256": "24813af8d701e1cdd3c58209a268b40a72030a361408fb5136fe5ea2eb762a00"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature from the opposite-clocked latches, but omits the inverter delay and unequal latch loading that make the outputs not exactly in quadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1947,
        "output_tokens": 1979,
        "total_tokens": 3926,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1815,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1947,
        "output_tokens": 1979,
        "total_tokens": 3926,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1815,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit is a **C^{2}MOS** (clocked CMOS) latch. It consists of two tri-state inverters placed in series (enabled on opposite phases of the clock), followed by a static CMOS inverter whose output is fed back to the input. This forms a positive level-sensitive latch (static due to the feedback).\n\n- The transistors gated by \\(CK\\) / \\(\\overline{CK}\\) sit **in series** with the logic transistors that perform the actual inversion.\n- The on-resistance of a MOSFET is inversely proportional to its width. Widening the clocked devices therefore **reduces the total series resistance** of the pull-up and pull-down paths.\n- The diffusion capacitance added by the wider clocked transistors appears only on the **internal** stacked nodes, not on the external output nodes that drive the next stage. Consequently the dominant time constants \\(R_{\\text{eq}}C_{\\text{load}}\\) of the circuit decrease.\n- Both the data-to-output delay (while the latch is transparent) and the clock-to-output delay therefore become smaller.\n\nHence the operating speed of the latch **improves**.\n\nFinal answer: \\({\\text{improves}}\\)",
        "format": "markdown",
        "sha256": "aac0767e71300219d0a1bd2aa6092a3c218f5ffad2e4444d3efe84fcfcb5eeec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that speed improves because wider clocked devices reduce series resistance without adding much output loading. It omits the charge-sharing effect that degrades swing and limits the benefit, so it does not earn full credit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2018,
        "output_tokens": 3674,
        "total_tokens": 5692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3427,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2018,
        "output_tokens": 3674,
        "total_tokens": 5692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3427,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a master-slave \\(\\mathrm{C}^{2}\\mathrm{MOS}\\) flip-flop (with \\(\\overline{Q}\\) tied back to \\(D\\)).\n\nEach stage consists of a logic transistor pair in series with a clocked transistor pair. The clocked devices therefore appear in the pull-up and pull-down paths that charge or discharge the stage output nodes.\n\n- Widening a clocked transistor lowers its on-resistance.\n- The reduced series resistance increases the current available to charge/discharge the load capacitance that is present at each stage output.\n- Consequently the RC time constants that set both the \\(t_{\\mathrm{CQ}}\\) delay and the minimum clock period shrink, and the maximum toggle frequency rises.\n\n(The extra diffusion capacitance that accompanies the wider devices is a second-order self-loading term; it does not reverse the first-order improvement obtained from the lower resistance.)\n\nFinal answer: \\( \\text{improves} \\)",
        "format": "markdown",
        "sha256": "bd90580ca2cdd62dc60f318a7df6db181e4aa0326d788e70fe28bd50784265ee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that speed improves because widening the clocked devices lowers their on-resistance. It omits the charge-sharing effect and its acceptable limit, so it does not earn full credit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2018,
        "output_tokens": 4006,
        "total_tokens": 6024,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3812,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2018,
        "output_tokens": 4006,
        "total_tokens": 6024,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3812,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **C\\(^{2}\\)MOS** (clocked CMOS) master-slave latch (two opposite-phase clocked inverters in series, followed by a static inverter).\n\n- The four transistors gated by \\(CK\\) / \\(\\overline{CK}\\) act as **series switches** that connect the logic transistors to \\(V_{DD}\\) or \\(GND\\).\n- The propagation delay of each stage is set by the **RC time constant** of the stacked pull-up or pull-down path that charges/discharges the stage output node.\n- Increasing the widths of the clocked devices **lowers their on-resistance** while leaving the capacitance of the output nodes essentially unchanged (the diffusion capacitance of the clocked transistors appears only on the *internal* stack nodes).\n- Consequently the equivalent resistance of every evaluation path decreases and the data propagation delay through the latch is reduced.\n\n**Speed therefore improves.**\n\nFinal answer: \\( \\text{improve} \\)",
        "format": "markdown",
        "sha256": "bb96cfb41f6cbb8015530298da598aadccda1306946ffbd41d8eb35af72c51f4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked devices improves speed by lowering their on-resistance with little added output loading. It omits the charge-sharing swing degradation that limits the improvement, so it does not earn full credit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2018,
        "output_tokens": 3192,
        "total_tokens": 5210,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2992,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2018,
        "output_tokens": 3192,
        "total_tokens": 5210,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2992,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of **three inverters** connected in a ring (odd number of inversions), with two series switches driven by the complementary signals \\(CK\\) and \\(\\overline{CK}\\).\n\n**Key observations on switch control:**\n- The switches are never on simultaneously (complementary controls).\n- The ring is therefore **never closed**. Free-running asynchronous oscillation (as in a conventional ring oscillator) is impossible.\n- Operation relies on **dynamic (capacitive) charge storage** at the floating nodes that appear when a switch is open.\n\n**Behavioral analysis:**\n\nLabel the nodes for reference:\n- \\(Y\\): output of the rightmost inverter (feeds the \\(CK\\) switch)\n- \\(Z\\): input of \\(\\mathrm{Inv}_1\\)\n- \\(W\\): output of \\(\\mathrm{Inv}_1\\) (feeds the \\(\\overline{CK}\\) switch)\n- \\(V\\): input of the middle inverter\n\n1. **\\(CK = 1\\) (\\(\\overline{CK} = 0\\))**  \n   - \\(CK\\) switch closed, \\(\\overline{CK}\\) switch open.  \n   - \\(Z \\leftarrow Y\\), \\(V\\) holds its prior value.  \n   - The right-hand pair of inverters forces \\(Y = V\\).  \n   - Consequently \\(W = \\overline{V}\\).  \n   - All values are static (held) for the duration of this phase.\n\n2. **\\(CK = 0\\) (\\(\\overline{CK} = 1\\))**  \n   - \\(CK\\) switch open, \\(\\overline{CK}\\) switch closed.  \n   - \\(Z\\) holds its prior value, \\(V \\leftarrow W\\).  \n   - The inverter chain now produces \\(Y = \\overline{Z}\\).  \n   - Because \\(Z\\) previously equalled the old value of \\(V\\), both \\(V\\) and \\(Y\\) **toggle**.\n\n3. **Returning to \\(CK = 1\\)**  \n   - The newly toggled value is captured and held again.  \n   - No further toggle occurs on the rising edge.\n\n**Resulting function**  \n- The logic state present on the dynamic nodes toggles once per full clock cycle (on the falling edge of \\(CK\\)).  \n- Any node (\\(V\\), \\(Y\\), \\ldots) therefore produces a square wave whose frequency is  \n\\[\nf_{\\text{out}} = \\frac{f_{CK}}{2}.\n\\]\n- The circuit is a **dynamic toggle flip-flop** (TFF with \\(T=1\\)) / **clock frequency divider by 2**.\n\n**Operating constraints**\n- Half-period of \\(CK\\) must be longer than the sum of the three inverter delays (so logic levels settle).  \n- Clock frequency must be high enough that leakage does not destroy the dynamically stored charge.  \n- When the clock is frozen at either level the circuit simply holds its last state (dynamic memory).\n\nThus the arrangement realises a dynamic divide-by-2 frequency divider.",
        "format": "markdown",
        "sha256": "1d79c543df40189727ccb95dedd0104b50659c299a1dc3f06c74fb5a8c4e800d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a dynamic-latch divide-by-two circuit. The detailed node analysis is not required for full credit under the golden solution.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1316,
        "output_tokens": 6983,
        "total_tokens": 8299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6354,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1316,
        "output_tokens": 6983,
        "total_tokens": 8299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6354,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a closed loop containing **three inverters** and **two switches** controlled by complementary clocks \\(\\mathrm{CK}\\) and \\(\\overline{\\mathrm{CK}}\\).\n\n**Operation:**\n\n- The switches are never on simultaneously (complementary controls).\n- Node capacitances provide dynamic storage when a switch is open.\n\n**Phase \\(\\mathrm{CK}=1\\) (\\(\\overline{\\mathrm{CK}}=0\\)):**\n- Left switch closed, right switch open.\n- The value on the feedback node is written to the input of \\(\\mathrm{Inv}_1\\).\n- The two right-hand inverters hold (and buffer) the prior state on their input capacitance.\n\n**Phase \\(\\mathrm{CK}=0\\) (\\(\\overline{\\mathrm{CK}}=1\\)):**\n- Left switch open, right switch closed.\n- The inverted value propagates through the chain of three inverters.\n- Because there are an **odd** number of inversions, the logic level that appears on the feedback node is the complement of the value stored in the previous phase.\n\n**Overall behavior:**\n- The circulating logic level **toggles once per clock cycle**.\n- Consequently, any node in the loop produces a square wave whose frequency is \\(f_{\\mathrm{CK}}/2\\).\n\nThis arrangement is therefore a **dynamic divide-by-2 frequency divider**.",
        "format": "markdown",
        "sha256": "31f20824db8a3db1c7854c6bc6bd8dcd266090ce17d66ce05495f19b7f9828d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic divide-by-two circuit and explains that its output frequency is half the clock frequency. The internal signal-path details are secondary under the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1316,
        "output_tokens": 4714,
        "total_tokens": 6030,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4433,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1316,
        "output_tokens": 4714,
        "total_tokens": 6030,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4433,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of **three inverters** connected in a loop, with two ideal switches inserted in series in the ring:\n\n- One switch controlled by \\(CK\\)\n- One switch controlled by \\(\\overline{CK}\\)\n\n**Key observation:** Since \\(CK\\) and \\(\\overline{CK}\\) are complementary, the two switches are never on simultaneously. The ring is therefore never fully closed and **cannot function as a ring oscillator**.\n\n**Node labelling** (for analysis):\n- Node \\(A\\): output of the rightmost inverter (also the left side of the \\(CK\\) switch)\n- Node \\(B\\): input of \\(\\mathrm{Inv}_1\\)\n- Node \\(C\\): output of \\(\\mathrm{Inv}_1\\)\n- Node \\(D\\): input of the middle inverter\n\n**Operation**\n\n1. **\\(CK = 1\\), \\(\\overline{CK} = 0\\)** (hold phase)\n   - \\(A\\) is connected to \\(B\\), so \\(C = \\overline{A}\\)\n   - The \\(\\overline{CK}\\) switch is open, leaving node \\(D\\) floating (dynamic storage).\n   - The two right-hand inverters form a non-inverting buffer, enforcing \\(A = D\\).\n   - The value previously stored on the capacitance at \\(D\\) is held and driven onto \\(A\\).\n\n2. **\\(CK = 0\\), \\(\\overline{CK} = 1\\)** (toggle phase)\n   - The \\(CK\\) switch is open, leaving node \\(B\\) floating.\n   - Node \\(C\\) (which holds \\(\\overline{A}_{\\text{old}}\\)) is connected to \\(D\\).\n   - Consequently \\(A\\) is driven to \\(D = \\overline{A}_{\\text{old}}\\).\n   - The state at \\(A\\) **toggles** exactly once and then remains stable for the remainder of the phase.\n\n**Result**\n- The logic value at every node in the loop toggles once per clock cycle.\n- The circuit therefore realises a **negative-edge-triggered T flip-flop** (\\(T = 1\\)) and acts as a **divide-by-2 frequency divider**.\n- If the input clock frequency is \\(f\\), the frequency of the signal observed at any node is \\(f/2\\).\n\n(The storage is dynamic; correct operation assumes that the clock period is short enough that charge leakage on the floating nodes remains negligible.)",
        "format": "markdown",
        "sha256": "a4040196db12a09ab6b8e57b4ab4a3adb6f38b06c03d39b214db3a19d9a4bbe8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic divider-by-two, with clocked storage and an output at half the input frequency. The detailed internal node analysis is not required for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1316,
        "output_tokens": 4351,
        "total_tokens": 5667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3836,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1316,
        "output_tokens": 4351,
        "total_tokens": 5667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3836,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **two-phase clocked dynamic storage/toggle element** (pass-transistor switches + inverter chain in a loop). Intermediate nodes (particularly the output of \\(\\text{Inv}_1\\)) store values as charge and are floating in one of the clock phases.\n\nThe highlighted (red) inverter is connected as a **keeper** (weak feedback/staticizer) between the loop node and the output of \\(\\text{Inv}_1\\):\n\n- It continuously reinforces the logical level on the otherwise dynamic node.\n- This compensates for charge leakage (subthreshold, junction, etc.).\n\n**Effect on performance:**\n- The circuit becomes **pseudo-static** (state is retained indefinitely). Correct operation is no longer limited by a minimum clock frequency.\n- Reliability/noise margins improve.\n- Drawbacks: slightly higher power (contention/short-circuit current while the keeper fights a transition) and a small degradation in speed (increased delay/setup time), plus extra area.\n\nWithout the red keeper the circuit is purely dynamic and will fail if the clock is too slow.",
        "format": "markdown",
        "sha256": "a81cd3ed04b538e1f6f663bf842ff48c7b2e32cc687f67d7a920904fe76dfc9b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a keeper rather than an unclocked feedforward path that bypasses part of the first latch. It reverses the key tradeoff: the path improves high-speed operation but raises the minimum usable clock frequency, rather than eliminating that limit.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1207,
        "output_tokens": 12572,
        "total_tokens": 13779,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12352,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1207,
        "output_tokens": 12572,
        "total_tokens": 13779,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12352,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a closed-loop toggle structure (frequency divider) based on a master-slave latch pair, with the loop completed by the bottom wire.\n\n- The black path (`CK` switch + \\(\\mathrm{Inv}_1\\) + \\(\\overline{\\mathrm{CK}}\\) switch + two inverters) provides the forward toggle operation on each clock cycle.\n- The **red inverter** closes a 2-inverter loop around \\(\\mathrm{Inv}_1\\) whenever the \\(CK\\) switch is on. This staticizes the master storage node (positive feedback / bistable latch), so the held value no longer relies on capacitance alone.\n\n**Effect on performance**\n- **Positive:** Correct operation is retained down to DC (no minimum clock frequency). Without the red device the master node is purely dynamic and will lose its state by leakage.\n- **Negative:** Because the red feedback path contains no series switch it remains on during the transfer phase (\\(\\overline{\\mathrm{CK}}\\) high). It therefore contends with the slave-side drivers. The contention\n  - produces crowbar current (higher power),\n  - slows the output transition (lower maximum toggle rate),\n  - forces the red inverter to be deliberately weakened, adding area and a small extra capacitive load on the output of \\(\\mathrm{Inv}_1\\).\n\nHence the red inverter trades a modest degradation in speed and power for static (low-frequency) robustness. \n\nFinal answer: staticizes master (allows DC op.) but adds contention (↑power, ↓speed)",
        "format": "markdown",
        "sha256": "80ba12bb1eec0dff627493e15892a1a53b527d20fb6d55c61cf7e375d172314a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that the unswitched red branch can contend, but misidentifies it as a keeper feedback loop and reverses both key performance effects: the feedforward path improves high-speed operation, while its unclocked behavior raises—not removes—the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1207,
        "output_tokens": 7537,
        "total_tokens": 8744,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7226,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1207,
        "output_tokens": 7537,
        "total_tokens": 8744,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7226,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **static CMOS latch** (specifically, a multiplexer-style or transmission-gate latch embedded in a closed loop).\n\n- The black path (CK-controlled TG + \\(\\mathrm{Inv}_1\\) + \\(\\overline{\\mathrm{CK}}\\)-controlled TG + two inverters) forms the forward propagation path.\n- Without the red inverter, storage is **dynamic**: when the TGs are off, logic levels are held only as charge on parasitic capacitors. Leakage eventually corrupts the state, so the clock cannot be stopped or run arbitrarily slowly.\n- The red inverter closes a weak feedback loop around the storage node. This continuously restores the logic level, converting the latch from dynamic to **static**.\n\n**Net performance impact**\n- **Positive**: State is retained indefinitely (even with CLK stopped or at very low frequency); robustness to leakage and noise is greatly improved.\n- **Negative**: During a write, the feedback inverter fights the new data (contention). If the feedback device is not deliberately weakened, this increases delay, raises short-circuit power, and can degrade setup time.\n\nThus the red inverter trades a small speed/power penalty for static operation and far higher reliability. \n\nFinal answer: makes latch static (holds state vs leakage; minor write contention)",
        "format": "markdown",
        "sha256": "f46e1460d2217ed8eb471f29d1b9fd3d38d11d3ae03716d59584cf3e2bf18ec5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the red inverter as a static keeper/feedback path. In fact, it is an unclocked feedforward path that bypasses part of the latch, improves high-speed operation, but can corrupt division at low clock rates and raises the minimum usable frequency—the opposite of the candidate’s conclusion.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1207,
        "output_tokens": 4005,
        "total_tokens": 5212,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1207,
        "output_tokens": 4005,
        "total_tokens": 5212,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The provided answer is **incorrect**.\n\nThe red inverter is wired with the same orientation as `Inv1` and connects the leftmost node (circuit input) to the node at the output of `Inv1`. This places it in **parallel** with the `CK`-switch + `Inv1` path (not in opposition to `Inv1`).\n\n**Cross-coupled latches** require opposite orientation (output of each inverter drives the input of the other) to create positive feedback. That is not present here, so the red inverter does **not** form a cross-coupled latch with `Inv1`.\n\n**Actual role of the red inverter:**  \nIt provides a continuous, clock-independent inverting path that keeps the intermediate node (output of `Inv1`) firmly driven at all times. This prevents that node from floating and thereby mitigates charge leakage, but it does so as a parallel level restorer / bypass path rather than as a keeper latch.",
        "format": "markdown",
        "sha256": "c38c3eae9d50cc1501f4989b9998870d8eb88b1f1e90aa9836bc48fa7350a1c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly rejects the cross-coupled-keeper interpretation and recognizes a clock-independent bypass from the earlier node to Inv1’s output. However, it incorrectly says this path prevents floating and mitigates leakage, missing the key tradeoff: it can help at high speed but overpower the intended latch behavior at low clock rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1252,
        "output_tokens": 22936,
        "total_tokens": 24188,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22741,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1252,
        "output_tokens": 22936,
        "total_tokens": 24188,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22741,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given answer is **correct**.\n\nThe circuit is a **dynamic latch/register stage** (likely part of a larger structure such as a toggle flop or shift-register loop, given the overall feedback path with a net inversion).  \n\n- The `CK`-controlled switch samples/writes a new value onto the input capacitance of \\(\\mathrm{Inv}_1\\).  \n- When that switch opens, the value is held dynamically on the floating node.  \n- Complementary switch \\(\\overline{\\mathrm{CK}}\\) then transfers the value downstream.  \n\nBecause the hold node is dynamic, sub-threshold/junction leakage will eventually corrupt the level. Consequently a **minimum clock frequency** would normally be required so that the node is refreshed before the stored charge is lost.\n\nThe red inverter closes a **weak feedback loop around \\(\\mathrm{Inv}_1\\)**, producing a classic cross-coupled (static) latch. Once the new data have been forced onto the latch nodes, the cross-coupled pair holds the state indefinitely by restoring both logic levels. Leakage is therefore counteracted continuously and the minimum-frequency restriction disappears; the circuit becomes pseudo-static.\n\n(The two inverters further to the right simply provide the additional inversion/buffering needed to close the overall loop; they are not part of the keeper action.)\n\nFinal answer: yes (keeper w/ Inv1; eliminates \\(f_{CK,min}\\))",
        "format": "markdown",
        "sha256": "b61d90a4c1c9a2c86d36ee02ae96af7b3cf2493c5e5f8891f3f7d3b54940ee63"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer repeats the central misconception: the red inverter is not cross-coupled with Inv1 and is not a keeper. It misses the feedforward role and reverses the clock-rate tradeoff; the unclocked branch can corrupt operation at low clock rates rather than eliminate the minimum-frequency requirement.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1252,
        "output_tokens": 7432,
        "total_tokens": 8684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7148,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1252,
        "output_tokens": 7432,
        "total_tokens": 8684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7148,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given explanation is **correct**.\n\nThe circuit is a looped dynamic (master-slave) structure equivalent to a toggle flip-flop / divide-by-2 element. In such a circuit the intermediate nodes are left floating in one of the two clock phases and therefore hold state only as charge on capacitance. Leakage eventually destroys the stored levels, imposing a minimum clock frequency.\n\nThe red inverter is wired as a weak feedback element around \\(\\mathrm{Inv}_1\\). Together the two inverters form a cross-coupled pair (a static latch cell). Consequently the node that would otherwise be dynamic is continuously restored to a full-rail level and is immune to leakage. The minimum-frequency restriction disappears and the circuit becomes pseudo-static.\n\n(The same keeper principle is used in virtually every practical dynamic latch, dynamic-to-static converter, and domino gate.)",
        "format": "markdown",
        "sha256": "199cc6d589497e8129b2c0938fd2794cb962191a6540f636850c2fb0ae5dd838"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly treats the red inverter as cross-coupled with Inv1. It is actually an unclocked feedforward branch that bypasses part of the latch path: it can improve high-speed operation but can overpower the intended behavior at low clock rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1252,
        "output_tokens": 12896,
        "total_tokens": 14148,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12720,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1252,
        "output_tokens": 12896,
        "total_tokens": 14148,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12720,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a resistively feedback-biased CMOS inverter (shunt-shunt topology) used as a broadband amplifier/LNA. The closed-loop input resistance is set by the feedback:\n\n\\[\nR_{\\mathrm{in}}\\approx\\frac{R_F}{1+|A_v|}\\approx\\frac{R_F}{g_{m1}+g_{m2}}\\cdot\\frac{1}{r_{o1}\\parallel r_{o2}}\n\\]\n\n(with \\(C_1\\) providing AC coupling only).  \n\n**Constraint.** \\(R_{\\mathrm{in}}\\) must stay exactly \\(50\\,\\Omega\\).  \n\n**Noise-figure optimization.**  \n- Raise \\(g_{m1}+g_{m2}\\) (larger device widths and/or higher bias current).  \n- Simultaneously raise \\(R_F\\) by the same factor so that the ratio above (and therefore \\(R_{\\mathrm{in}}\\)) remains \\(50\\,\\Omega\\).  \n\nThe higher \\(g_m\\) directly lowers the channel-noise contribution referred to the input, while the larger \\(R_F\\) both increases available gain and reduces the relative noise contribution of the feedback resistor itself. The net result is a monotonic improvement in NF (until second-order effects such as \\(f_T\\) roll-off or excessive power appear).  \n\nFinal answer: increase \\(g_m\\) (W or \\(I_D\\)) & \\(R_F\\) proportionally (keep \\(R_{in}=50\\))",
        "format": "markdown",
        "sha256": "e39d4a1883b9ea3f4c28226eb6b354b32c08285051a400a39c2f56afbec1f957"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the correct strategy: increase total gm and raise RF to maintain the 50-ohm match while reducing NF. Its high-loop-gain input-resistance approximation includes finite ro and captures the relevant trend.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2298,
        "output_tokens": 1708,
        "total_tokens": 4006,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1396,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2298,
        "output_tokens": 1708,
        "total_tokens": 4006,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1396,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a self-biased CMOS inverter (common-source stage) employing shunt-shunt resistive feedback. The closed-loop input resistance is set by the feedback relation\n\\[\nR_{\\mathrm{in}}=\\frac{R_F}{1+|A_v|}\\approx\\frac{R_F}{G_m R_L},\n\\]\nwhere \\(G_m=g_{m1}+g_{m2}\\) and \\(R_L=r_{o1}\\parallel r_{o2}\\).  \n\nEnforcing \\(R_{\\mathrm{in}}=50\\,\\Omega\\) therefore fixes the product \\(R_F\\cdot G_m\\). Both the channel noise of the MOSFETs and the thermal noise of \\(R_F\\) are suppressed by raising \\(G_m\\) (i.e., by enlarging device widths or bias current) while simultaneously scaling \\(R_F\\) upward so that the product—and hence \\(R_{\\mathrm{in}}\\)—remains constant. The resulting noise factor decreases monotonically with \\(G_m\\), yielding the optimum NF under the given matching constraint.\n\nFinal answer: \\( \\uparrow g_{m1,2} \\) (& scale \\(R_F\\) to hold \\(R_{in}=50\\))",
        "format": "markdown",
        "sha256": "6b05e6842f117178ed4513f4e8f09864d01191084a59429539ca1d7c67b03e61"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The main optimization is right: raise gm and adjust RF upward to maintain the 50 Ω match, reducing NF. But the claimed fixed RF·gm product is inconsistent with its own approximation (RF/gm should remain fixed for fixed ro), and it does not establish the finite-ro result that gm can exceed 1/Rs and NF fall below 1+γ.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2298,
        "output_tokens": 2215,
        "total_tokens": 4513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2298,
        "output_tokens": 2215,
        "total_tokens": 4513,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a complementary (inverter-based) common-source stage with shunt-shunt resistive feedback. Neglecting channel-length modulation (\\(r_o \\to \\infty\\)), a small-signal analysis of the circuit yields the input resistance\n\\[\nR_\\text{in}=\\frac{1}{g_{m1}+g_{m2}}.\n\\]\nThe matching constraint \\(R_\\text{in}=50\\,\\Omega\\) therefore fixes the total transconductance at\n\\[\ng_{m1}+g_{m2}=\\frac{1}{50}\\,\\text{S}.\n\\]\n(The individual device transconductances may still be ratioed to exploit differences in the NMOS/PMOS noise factors \\(\\gamma_n\\) and \\(\\gamma_p\\), but their sum is invariant.)\n\nWith the matching constraint satisfied, the noise factor reduces to a monotonically decreasing function of the normalized feedback resistance \\(x=R_F/R_S\\):\n\\[\nF=1+\\frac{\\gamma(x+1)^2+4x}{(x-1)^2}.\n\\]\nConsequently \\(F\\) (and therefore the noise figure) is minimized by making \\(R_F\\) as large as possible. In practice the upper bound on \\(R_F\\) is set by the allowable gain, the closed-loop bandwidth, or the onset of instability, but under the sole constraint \\(R_\\text{in}=50\\,\\Omega\\) the optimum is simply the largest admissible \\(R_F\\).\n\nFinal answer: set \\(g_{m1}+g_{m2}=1/50\\) S & maximize \\(R_F\\)",
        "format": "markdown",
        "sha256": "4767eb41bb2841b48d7c0a54b3fc93728f818d634509018ee7ab6792d0ed1f5a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the shunt-feedback inverter, but assumes infinite output resistance, fixes total gm at 1/50 S, and recommends maximizing RF. This misses the key result: finite ro lets gm exceed 1/Rs while RF is adjusted to keep Rin at 50 Ω, lowering NF below 1 + γ.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2298,
        "output_tokens": 15405,
        "total_tokens": 17703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2298,
        "output_tokens": 15405,
        "total_tokens": 17703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a common-source stage (\\(M_1\\)) followed by a PMOS differential pair (\\(M_2\\)-\\(M_3\\)) with the drain of \\(M_2\\) returned to the input node \\(P\\). The resistor \\(R_F\\) connects the differential-pair drains, while \\(R_{D1}\\) and \\(R_{D2}\\) are the passive loads. The elements \\(R_{\\rm in}\\) and \\(C_{\\rm in}\\) appear in parallel at the input port.\n\nAll channel-length modulation is neglected. The short-circuit current of the differential pair that appears at each drain is controlled by the equivalent transconductance\n\\[\ng_{m,{\\rm eq}}=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}.\n\\]\nConsequently the drain current of \\(M_1\\) produces the intermediate voltage\n\\[\nv_X=-g_{m1}R_{D1}v_P.\n\\]\n\nKirchhoff’s current law written at the output node and at the input node \\(P\\), followed by elimination of the intermediate variables \\(v_X\\) and \\(v_{\\rm out}\\), yields the input admittance\n\\[\nY_{\\rm in}(s)=sC_{\\rm in}+\\frac{1}{R_{\\rm in}}+\\frac{1-g_{m1}R_{D1}g_{m,{\\rm eq}}R_F}{R_F+R_{D2}}.\n\\]\nThe input impedance of the circuit is therefore the reciprocal\n\\[\nZ_{\\rm in}(s)=\\Biggl(sC_{\\rm in}+\\frac{1}{R_{\\rm in}}+\\frac{1-g_{m1}R_{D1}g_{m,{\\rm eq}}R_F}{R_F+R_{D2}}\\Biggr)^{-1}.\n\\]\n\nFinal answer: \\(Z_{\\rm in}(s)=\\left(sC_{\\rm in}+\\frac{1}{R_{\\rm in}}+\\frac{1-g_{m1}R_{D1}g_{m,eq}R_F}{R_F+R_{D2}}\\right)^{-1}\\), \\(g_{m,eq}=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\)",
        "format": "markdown",
        "sha256": "c47f68bc2a61897437f2840b6d47d89d624900b8929f2f44fa42d23245516b45"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes a feedback resistor and amplifier stages, but the input-impedance expression and equivalent-transconductance model do not match the circuit’s Miller result, which is \\((R_F+R_{D2})/(1+A_0)\\). The added input-parasitic terms do not fix the incorrect central result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 416,
        "output_tokens": 27884,
        "total_tokens": 28300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27380,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 416,
        "output_tokens": 27884,
        "total_tokens": 28300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27380,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit is a transimpedance amplifier employing shunt-shunt feedback via \\(R_F\\).\n\n**Small-signal analysis (capacitive parasitics at internal nodes neglected):**\n\n- The voltage gain from the gate of \\(M_1\\) to node \\(X\\) is \\(-g_{m1}R_{D1}\\).\n- Transistors \\(M_2\\) and \\(M_3\\) form a PMOS differential pair biased by the ideal tail current \\(I_{SS}\\). With \\(v_b\\) at AC ground and matched devices (\\(g_{m2}=g_{m3}=g_m\\)), the single-ended transconductance from node \\(X\\) to the drain current of \\(M_3\\) is \\(g_m/2\\).\n- Consequently, the open-loop voltage gain (feedback network disconnected) from the input node to \\(v_{\\rm out}\\) is\n  \\[\n  -A,\\qquad A=\\frac{1}{2}g_{m1}g_m R_{D1}R_{D2}.\n  \\]\n  The open-loop output resistance is \\(R_{D2}\\).\n\n- Reconnecting the feedback resistor \\(R_F\\) and writing KCL at the input and output nodes yields the exact closed-loop relationship\n  \\[\n  \\frac{i_{\\rm in}}{v_{\\rm in}}=sC_{\\rm in}+\\frac{1}{R_{\\rm in}}+\\frac{1+A}{R_F+R_{D2}}.\n  \\]\n  (The same result is obtained from shunt-shunt feedback formulas: the resistance looking into the controlled stage is \\((R_F+R_{D2})/(1+A)\\), which then appears in parallel with the explicit elements \\(R_{\\rm in}\\) and \\(C_{\\rm in}\\).)\n\nTherefore the input impedance is\n\\[\nZ_{\\rm in}(s)=\\left(sC_{\\rm in}+\\frac{1}{R_{\\rm in}}+\\frac{1+A}{R_F+R_{D2}}\\right)^{-1},\n\\]\nwhere \\(A=\\frac12 g_{m1}g_m R_{D1}R_{D2}\\).\n\nFinal answer: \\(Z_{\\rm in}(s)=\\left(sC_{\\rm in}+1/R_{\\rm in}+(1+A)/(R_F+R_{D2})\\right)^{-1}\\) with \\(A=(1/2)g_{m1}g_m R_{D1}R_{D2}\\)",
        "format": "markdown",
        "sha256": "fe33dbaca04c87f1e1fd33a82bd3af499f823fcb4fff9043c329688c7e72250e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the two-stage gain and the Miller feedback contribution, \n(1+A)/(R_F+R_{D2}), equivalent to the golden input resistance. However, it adds unsupported shunt R_in and C_in terms, so its final input impedance is not the circuit's exact result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 416,
        "output_tokens": 13179,
        "total_tokens": 13595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 416,
        "output_tokens": 13179,
        "total_tokens": 13595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The input port of the circuit is the node \\(P\\). The excitation current \\(I_{\\mathrm{in}}\\) is injected into this node.\n\nThe elements connected to node \\(P\\) are:\n- the resistor \\(R_{\\mathrm{in}}\\),\n- the capacitor \\(C_{\\mathrm{in}}\\),\n- the gate terminal of \\(M_1\\).\n\nThe gate current of a MOSFET is identically zero. Consequently, no current flows into the remainder of the circuit from node \\(P\\).\n\nBy KCL at node \\(P\\),\n\\[\nI_{\\mathrm{in}} = \\frac{V_P}{R_{\\mathrm{in}}} + s C_{\\mathrm{in}} V_P.\n\\]\nThe input impedance is therefore\n\\[\nZ_{\\mathrm{in}}(s) \\triangleq \\frac{V_P}{I_{\\mathrm{in}}} = R_{\\mathrm{in}} \\parallel \\frac{1}{s C_{\\mathrm{in}}} = \\frac{R_{\\mathrm{in}}}{1 + s C_{\\mathrm{in}} R_{\\mathrm{in}}}.\n\\]\n\nFinal answer: \\(Z_{\\mathrm{in}}=R_{\\mathrm{in}}\\parallel\\frac{1}{sC_{\\mathrm{in}}}\\)",
        "format": "markdown",
        "sha256": "2d2c5f82da6857e38e7177a6f09ccf6e1a5275520aff8cf888a0f9b360bcf91e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer ignores the feedback path through \\(R_F\\) and the amplifier, incorrectly treating the MOS gate as isolating the input from the rest of the circuit. It misses the required result \\(R_{in}=(R_F+R_{D2})/(1+A_0)\\).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 416,
        "output_tokens": 25720,
        "total_tokens": 26136,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 416,
        "output_tokens": 25720,
        "total_tokens": 26136,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO output noise voltage (PSD \\(S_{th}\\)) appears as a common-mode perturbation on the oscillator supply node \\(V_{out}\\).\n\nThis common-mode voltage directly modulates the instantaneous voltage across the MOS varactors \\(M_{v1,2}\\). Consequently the tank capacitance (and therefore the oscillation frequency) is modulated:\n\n\\[\n\\delta\\omega(t)=K_{VDD}\\,v_{n,\\mathrm{LDO}}(t),\\qquad\nK_{VDD}\\triangleq\\frac{\\partial\\omega_0}{\\partial V_{out}}.\n\\]\n\nFrequency modulation integrates to phase:\n\n\\[\n\\phi(t)=\\int\\delta\\omega(\\tau)\\,d\\tau\n\\quad\\Rightarrow\\quad\nS_\\phi(\\Delta\\omega)=\\frac{K_{VDD}^2\\,S_{th}}{(\\Delta\\omega)^2}.\n\\]\n\nThe single-sideband phase noise is therefore\n\n\\[\n\\mathcal{L}(\\Delta\\omega)=\\frac{S_\\phi(\\Delta\\omega)}{2}\n=\\frac{K_{VDD}^2\\,S_{th}}{2(\\Delta\\omega)^2}.\n\\]\n\n(The same result is obtained from the more general Hajimiri ISF formalism by evaluating the supply-node ISF; for a symmetric LC tank the ISF calculation reduces to the simple FM expression above.)\n\nFinal answer: \\(\\mathcal{L}(\\Delta\\omega)=K_{VDD}^{2}S_{th}/[2(\\Delta\\omega)^{2}]\\)",
        "format": "markdown",
        "sha256": "9ff6fe14fc4928e81eccefa5e2c12d4bec36f3150dea84af5de4cea3b15b5630"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing through the varactors and derives the FM-to-phase-noise dependence with the appropriate sensitivity. It omits the explicit design insight that this sensitivity is closely related to KVCO, so reducing KVCO reduces the conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2677,
        "output_tokens": 3384,
        "total_tokens": 6061,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2677,
        "output_tokens": 3384,
        "total_tokens": 6061,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO output noise appears directly as supply noise on the VCO (i.e., on the common-mode node of the \\(LC\\) tank).  \n\nThis supply fluctuation is converted into frequency fluctuation by the oscillator’s supply-pushing coefficient\n\\[\nK_{VDD}=\\frac{\\partial\\omega_{\\rm osc}}{\\partial V_{\\rm out}}\\qquad\\bigl(\\text{rad/s per volt}\\bigr).\n\\]\nBecause instantaneous frequency is the derivative of phase, the resulting phase-noise spectrum (double-sided) is simply\n\\[\nS_{\\phi}(\\omega_m)=\\Bigl(\\frac{K_{VDD}}{\\omega_m}\\Bigr)^2S_{\\rm th}(\\omega_m).\n\\]\n(The single-sideband phase noise \\(\\mathcal{L}(\\omega_m)\\) that is customarily plotted is \\(S_{\\phi}/2\\).)\n\nFinal answer: \\(S_\\phi(\\omega_m)=(K_{VDD}/\\omega_m)^2 S_{th}\\)",
        "format": "markdown",
        "sha256": "8a6481821ec36c03a34d67530edfeef117eeaf95a6bd9a02e9e8a244cae941a6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The supply-pushing sensitivity and FM-to-phase-noise conversion are correct, and the PSD/SSB distinction is reasonable. It omits the circuit-specific insight that the supply perturbation acts directly on the varactors, so reducing KVCO also reduces this noise conversion; the common-mode-node description is somewhat imprecise.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2677,
        "output_tokens": 2174,
        "total_tokens": 4851,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1960,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2677,
        "output_tokens": 2174,
        "total_tokens": 4851,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1960,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO output noise (PSD \\(S_{th}\\)) appears directly as supply noise on \\(V_{out}\\). \n\nIn an LC-VCO this noise produces frequency modulation through the supply-pushing coefficient\n\\[\nK_{VDD}=\\frac{\\partial f_{\\rm osc}}{\\partial V_{out}}.\n\\]\nThe resulting single-sideband phase-noise spectrum is therefore\n\\[\n\\mathcal{L}(\\Delta f)=\\frac{K_{VDD}^{2}\\,S_{th}(\\Delta f)}{2(\\Delta f)^{2}}.\n\\]\n\n(The same result follows from the impulse-sensitivity-function formalism by converting the voltage noise into an equivalent current noise injected into the tank and evaluating the ISF of the supply node; for offset frequencies well below the oscillation frequency the two approaches coincide.)\n\nFinal answer: \\(\\mathcal{L}(\\Delta f)=K_{VDD}^{2} S_{th}(\\Delta f)/(2(\\Delta f)^{2})\\)",
        "format": "markdown",
        "sha256": "7c8e53695f0bab661eab24752660d329537d9eb788dcd7ffc23d4a9ea66a1307"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing and gives the FM-to-phase-noise relation with the expected 1/Δf² dependence. It omits the circuit-specific insight that supply noise acts directly on the varactors, making Kpush closely related to KVCO and motivating a lower KVCO.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2677,
        "output_tokens": 2479,
        "total_tokens": 5156,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2273,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2677,
        "output_tokens": 2479,
        "total_tokens": 5156,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2273,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a standard cross-coupled LC oscillator (negative-\\(g_m\\) topology). The dominant high-frequency noise contribution of the tail current source \\(I_{SS}\\) occurs near \\(2\\omega_0\\). This noise component is mixed down to the oscillation frequency by the hard-switching differential pair and appears as phase noise.\n\nPlacing a capacitor \\(C_T\\) from the tail node to ground creates a low-impedance path that shunts the \\(2\\omega_0\\) noise current of \\(I_{SS}\\) to AC ground before it can be up-converted. Consequently the phase-noise contribution of the tail source is suppressed and the overall phase noise of the oscillator decreases.\n\nFinal answer: phase noise decreases",
        "format": "markdown",
        "sha256": "0f3224811b22f7054df4063d4a95df8060c03b329474878fe7d2daf9a8cf3d75"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims a monotonic phase-noise decrease from shunting tail-source noise, missing the nonmonotonic effects and class-C mechanism required by the golden solution.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2650,
        "output_tokens": 2340,
        "total_tokens": 4990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2193,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2650,
        "output_tokens": 2340,
        "total_tokens": 4990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2193,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a standard cross-coupled LC oscillator (also called a negative-\\(g_m\\) oscillator). The dominant high-frequency noise contribution of the tail current source \\(I_{SS}\\) occurs near the even harmonics of the oscillation frequency (primarily \\(2\\omega_0\\)).\n\nThese noise components are commutated by the differential pair \\(M_1/M_2\\) and fold down onto the fundamental, appearing as phase noise sidebands.  \n\nThe added capacitor \\(C_T\\) forms a low-pass filter at the common-source (tail) node. It shunts the high-frequency noise of \\(I_{SS}\\) to ground before the noise can be up-converted, thereby reducing the phase-noise contribution of the tail current.\n\n(The same capacitor also alters the common-mode waveform and can produce a secondary, usually smaller, degradation of tank \\(Q\\) when the switches enter the triode region; the net result for practical values of \\(C_T\\) is still an improvement in phase noise.)\n\nFinal answer: \\( \\downarrow \\) phase noise (tail noise filtered)",
        "format": "markdown",
        "sha256": "762b37c4045525d08caa239b544c5bf7671d9160da6679d9d6ba96b7b9fcefa8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that CT improves phase noise monotonically by filtering tail noise, missing the key nonmonotonic behavior and class-C improvement mechanism. The brief triode mention does not correct that conclusion.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2650,
        "output_tokens": 3594,
        "total_tokens": 6244,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3370,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2650,
        "output_tokens": 3594,
        "total_tokens": 6244,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3370,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a standard cross-coupled NMOS LC oscillator (VCO). The dominant contribution of the tail current source \\(I_{SS}\\) to phase noise arises from its noise current spectral density around the second harmonic \\(2\\omega_0\\), which is down-converted to the oscillation frequency by the switching action of \\(M_1/M_2\\).\n\nPlacing a capacitor \\(C_T\\) directly across the tail node creates a low-pass filter that shunts this high-frequency noise to ground before it can be mixed down. Consequently the phase-noise contribution of \\(I_{SS}\\) is suppressed and the overall phase noise of the oscillator improves (decreases).\n\n(The same capacitor also alters the common-mode waveform and the ISF of the switching pair; those second-order effects are usually weaker than the direct filtering of \\(I_{SS}\\) noise.)\n\nFinal answer: phase noise decreases (ISS noise filtered)",
        "format": "markdown",
        "sha256": "744cb39a8f5b9439b99d6871d269eca421a2bf449a9b5dab7fb861d1353a7b12"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that adding CT monotonically improves phase noise by filtering ISS noise, missing the nonmonotonic effect and the class-C improvement/degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2650,
        "output_tokens": 1933,
        "total_tokens": 4583,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1741,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2650,
        "output_tokens": 1933,
        "total_tokens": 4583,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1741,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two identical differential LC oscillators. Each oscillator is formed from a cross-coupled NMOS pair (providing the negative resistance required to sustain oscillation) loaded by an inductive tank, with an additional pair of coupling transistors.\n\nThe two oscillators are coupled to each other through the additional transistor pairs (biased by the \\(I_1\\) current sources) in a manner that enforces a \\(90^\\circ\\) phase relationship between the two tanks (i.e., a quadrature VCO topology).\n\nIn this architecture the free-running oscillation frequency is set by the resonance of the LC tanks:\n\n\\[\nf_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{LC}}\n\\]\n\n(where \\(C\\) is the total capacitance appearing at each tank node, including device parasitics). The coupling network produces only a small perturbation of this frequency.\n\nFinal answer: \\(1/(2\\pi\\sqrt{LC})\\)",
        "format": "markdown",
        "sha256": "22e6e346976251508c7d11b5f7542101ace857962c244348897cd9dd3ab20e19"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The LC tank resonance is correctly identified, and the answer notes that coupling perturbs it. But it omits the essential coupling-induced shift, such as Δω ≈ αω0/(2Q), so the estimate is incomplete.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1741,
        "output_tokens": 4113,
        "total_tokens": 5854,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3923,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1741,
        "output_tokens": 4113,
        "total_tokens": 5854,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3923,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two identical differential LC oscillators that are coupled to each other (via the additional transistors whose gates are driven by the opposite oscillator). \n\nEach core is a standard cross-coupled pair loaded by an LC tank (the two inductors share a common supply connection at their center tap). The two cores lock in quadrature due to the coupling, but this does **not** alter the oscillation frequency to first order.\n\nThe oscillation frequency is therefore set by the tank resonance:\n\n\\[\nf_{\\mathrm{osc}} \\approx \\frac{1}{2\\pi\\sqrt{LC}}\n\\]\n\nwhere \\(L\\) is the inductance of each tank inductor and \\(C\\) is the total capacitance appearing at each of the nodes \\(X_{1,2}\\) / \\(Y_{1,2}\\) (explicit tank capacitors plus device parasitics).\n\n(The bias currents \\(I_{\\mathrm{SS}}\\) and \\(I_1\\) set the amplitude and the coupling strength, respectively, but do not appear in the expression for frequency.)",
        "format": "markdown",
        "sha256": "ca9d4f81d9ed9451239b36bbf6677deaec8ee4c5c8a56b0459d7b871e623e534"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the tank resonance, but incorrectly says coupling does not shift the oscillation frequency. The required estimate includes a coupling-dependent shift, approximately ±αω₀/(2Q).",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1741,
        "output_tokens": 3093,
        "total_tokens": 4834,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2886,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1741,
        "output_tokens": 3093,
        "total_tokens": 4834,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2886,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "x-ai/grok-4.5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two identical differential LC oscillator cores. Each core is formed from a pair of matched inductors (connected to the positive supply) together with a cross-coupled MOS pair that supplies the negative resistance needed to sustain oscillation.  \n\nThe two cores are coupled to each other by additional MOS transistors whose gates are driven by the opposite core (the long interconnects that cross between the upper and lower halves of the schematic). This coupling locks the two oscillators in phase quadrature, but it does not alter the resonance condition of the individual tanks.  \n\nConsequently the steady-state oscillation frequency is set by the natural frequency of each LC tank:\n\n\\[\nf_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{LC}}\n\\]\n\nwhere \\(L\\) is the inductance of one tank inductor and \\(C\\) is the total capacitance present at each of the nodes \\(X_{1,2}\\) / \\(Y_{1,2}\\) (device capacitances plus any explicit load capacitance).  \n\n(The bias currents \\(I_{\\rm SS}\\) and \\(I_1\\) affect only the amplitude and the locking range; they do not appear in the expression for \\(f_{\\rm osc}\\).)\n\nFinal answer: \\(1/(2\\pi\\sqrt{LC})\\)",
        "format": "markdown",
        "sha256": "c8d7f0059007a802b3215cbe1b6783ea48a362d9c84019dd6bdb2af40219c809"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The LC tank resonance is a valid baseline, but the answer incorrectly claims coupling does not shift the oscillation frequency. It omits the essential coupling-dependent shift, approximately \\(\\Delta\\omega=\\alpha\\omega_0/(2Q)\\).",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1741,
        "output_tokens": 4210,
        "total_tokens": 5951,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1741,
        "output_tokens": 4210,
        "total_tokens": 5951,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    }
  ]
}
