{
  "model_key": "grok_46",
  "display_name": "Grok 4.6",
  "provider": "xai",
  "evaluation_model_ids": [],
  "thinking_effort": "xhigh",
  "configuration_note": "Grok 4.6 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (x-ai/grok-4.6) at reasoning effort xhigh, the highest it offers. Requests set temperature to 0 and max_tokens to 450,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Grok 4.6 on 2026-11-10 ($2.00 input, $0.50 cached input, $6.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 93,
          "incorrect_count": 57,
          "partial_credit_count": 41,
          "zero_count": 16,
          "mean_score_0_to_4": 3.033333333333333,
          "score_percent": 75.83333333333333,
          "score_distribution": {
            "0": 16,
            "1": 15,
            "2": 10,
            "3": 16,
            "4": 93
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 93,
          "incorrect_count": 57,
          "partial_credit_count": 41,
          "zero_count": 16,
          "mean_score_0_to_4": 3.033333333333333,
          "score_percent": 75.83333333333333,
          "score_distribution": {
            "0": 16,
            "1": 15,
            "2": 10,
            "3": 16,
            "4": 93
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 69,
          "incorrect_count": 21,
          "partial_credit_count": 9,
          "zero_count": 12,
          "mean_score_0_to_4": 3.311111111111111,
          "score_percent": 82.77777777777777,
          "score_distribution": {
            "0": 12,
            "1": 1,
            "2": 3,
            "3": 5,
            "4": 69
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 69,
          "incorrect_count": 21,
          "partial_credit_count": 9,
          "zero_count": 12,
          "mean_score_0_to_4": 3.311111111111111,
          "score_percent": 82.77777777777777,
          "score_distribution": {
            "0": 12,
            "1": 1,
            "2": 3,
            "3": 5,
            "4": 69
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 24,
          "incorrect_count": 36,
          "partial_credit_count": 32,
          "zero_count": 4,
          "mean_score_0_to_4": 2.6166666666666667,
          "score_percent": 65.41666666666667,
          "score_distribution": {
            "0": 4,
            "1": 14,
            "2": 7,
            "3": 11,
            "4": 24
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 24,
          "incorrect_count": 36,
          "partial_credit_count": 32,
          "zero_count": 4,
          "mean_score_0_to_4": 2.6166666666666667,
          "score_percent": 65.41666666666667,
          "score_distribution": {
            "0": 4,
            "1": 14,
            "2": 7,
            "3": 11,
            "4": 24
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 29,
        "incorrect_count": 21,
        "partial_credit_count": 15,
        "zero_count": 6,
        "mean_score_0_to_4": 2.96,
        "score_percent": 74.0,
        "score_distribution": {
          "0": 6,
          "1": 5,
          "2": 3,
          "3": 7,
          "4": 29
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 30,
        "incorrect_count": 20,
        "partial_credit_count": 15,
        "zero_count": 5,
        "mean_score_0_to_4": 3.0,
        "score_percent": 75.0,
        "score_distribution": {
          "0": 5,
          "1": 5,
          "2": 5,
          "3": 5,
          "4": 30
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 34,
        "incorrect_count": 16,
        "partial_credit_count": 11,
        "zero_count": 5,
        "mean_score_0_to_4": 3.14,
        "score_percent": 78.5,
        "score_distribution": {
          "0": 5,
          "1": 5,
          "2": 2,
          "3": 4,
          "4": 34
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 62208,
        "input_tokens": 244572,
        "output_tokens": 901937,
        "total_tokens": 1146509
      },
      "known_totals": {
        "cached_input_tokens": 62208,
        "input_tokens": 244572,
        "output_tokens": 901937,
        "total_tokens": 1146509
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 22,
          "incorrect_count": 8,
          "partial_credit_count": 4,
          "zero_count": 4,
          "mean_score_0_to_4": 3.2333333333333334,
          "score_percent": 80.83333333333333,
          "score_distribution": {
            "0": 4,
            "1": 1,
            "2": 1,
            "3": 2,
            "4": 22
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 22,
          "incorrect_count": 8,
          "partial_credit_count": 4,
          "zero_count": 4,
          "mean_score_0_to_4": 3.2666666666666666,
          "score_percent": 81.66666666666667,
          "score_distribution": {
            "0": 4,
            "2": 2,
            "3": 2,
            "4": 22
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 25,
          "incorrect_count": 5,
          "partial_credit_count": 1,
          "zero_count": 4,
          "mean_score_0_to_4": 3.433333333333333,
          "score_percent": 85.83333333333333,
          "score_distribution": {
            "0": 4,
            "3": 1,
            "4": 25
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 7,
          "incorrect_count": 13,
          "partial_credit_count": 11,
          "zero_count": 2,
          "mean_score_0_to_4": 2.55,
          "score_percent": 63.74999999999999,
          "score_distribution": {
            "0": 2,
            "1": 4,
            "2": 2,
            "3": 5,
            "4": 7
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 8,
          "incorrect_count": 12,
          "partial_credit_count": 11,
          "zero_count": 1,
          "mean_score_0_to_4": 2.6,
          "score_percent": 65.0,
          "score_distribution": {
            "0": 1,
            "1": 5,
            "2": 3,
            "3": 3,
            "4": 8
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 9,
          "incorrect_count": 11,
          "partial_credit_count": 10,
          "zero_count": 1,
          "mean_score_0_to_4": 2.7,
          "score_percent": 67.5,
          "score_distribution": {
            "0": 1,
            "1": 5,
            "2": 2,
            "3": 3,
            "4": 9
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is \\(g_m r_o\\). Doubling both \\(W\\) and \\(L\\) leaves the ratio \\(W/L\\) unchanged. With the same applied voltages this implies that \\(I_D\\) (and thus \\(V_{OV}\\)) is also unchanged to first order. Consequently \\(g_m\\) is unchanged while the channel-length modulation coefficient \\(\\lambda\\propto 1/L\\) is halved, so \\(r_o=1/(\\lambda I_D)\\) doubles. The product \\(g_m r_o\\) therefore doubles.\n\nFinal answer: doubles",
        "format": "markdown",
        "sha256": "30955db9a707b35ea2885784de033732bcbacbe3d83aa37cb3d021d7c343b484"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies intrinsic gain as gm·ro and explains that, with unchanged applied voltages, gm and drain current remain approximately constant while ro doubles as channel length doubles.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 225,
        "output_tokens": 1350,
        "total_tokens": 1575,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1224,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 225,
        "output_tokens": 1350,
        "total_tokens": 1575,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1224,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is \\(g_m r_o\\). For a long-channel device this equals \\(2/(\\lambda V_\\mathrm{ov})\\). Because \\(\\lambda\\propto 1/L\\), the product is proportional to \\(L/V_\\mathrm{ov}\\).\n\nDoubling both \\(W\\) and \\(L\\) leaves \\(W/L\\) unchanged. Consequently a given bias current (or a given \\(V_\\mathrm{GS}\\)) produces the same overdrive \\(V_\\mathrm{ov}\\) as before, while \\(\\lambda\\) is halved. The intrinsic gain therefore doubles.\n\nFinal answer: doubles",
        "format": "markdown",
        "sha256": "fe5bef364e5f9524d49ab8202a2a57a63d4549fc7b4e0f3716efa650cdbf98a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies intrinsic gain as gm·ro and explains that doubling both dimensions preserves W/L while halving λ, so the gain approximately doubles under the stated bias assumptions.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 225,
        "output_tokens": 1933,
        "total_tokens": 2158,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1803,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 225,
        "output_tokens": 1933,
        "total_tokens": 2158,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1803,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is \\(g_m r_o\\). With \\(W/L\\) held constant (and thus \\(I_D\\) and \\(V_{OV}\\) also held constant under the usual square-law bias), \\(g_m\\) is unchanged. Because \\(\\lambda\\propto 1/L\\), doubling \\(L\\) halves \\(\\lambda\\) and therefore doubles \\(r_o\\). Consequently the product \\(g_m r_o\\) doubles.\n\nFinal answer: doubles",
        "format": "markdown",
        "sha256": "291357e979201242f70a2e5216fde234bb7a76fffbde552eadfb3fdc189b47b3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies intrinsic gain as gm·ro and explains that scaling W and L together preserves W/L and gm, while the longer channel reduces λ and doubles ro. The stated square-law bias assumption supports the resulting doubling.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 225,
        "output_tokens": 1037,
        "total_tokens": 1262,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 935,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 225,
        "output_tokens": 1037,
        "total_tokens": 1262,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 935,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transconductance of a MOSFET is defined as \\(g_m=\\partial I_D/\\partial V_{GS}\\) (with \\(V_{DS}\\) held constant). For a given device (fixed \\(W/L\\)) operating in saturation under the square-law model,\n\\[\nI_D=\\frac12\\mu C_{ox}\\frac{W}{L}V_{ov}^2\\qquad\\Rightarrow\\qquad g_m=\\mu C_{ox}\\frac{W}{L}V_{ov}.\n\\]\nThus \\(g_m\\) rises linearly with overdrive. (The same conclusion follows from the equivalent expressions \\(g_m=\\sqrt{2\\mu C_{ox}(W/L)I_D}\\) or \\(g_m=2I_D/V_{ov}\\) once it is recognized that \\(I_D\\) itself grows with \\(V_{ov}\\).)\n\nStudent B’s claim would hold only if current were somehow constrained to remain constant while \\(V_{ov}\\) changed (forcing \\(W/L\\) to change). That is not the situation implied by “a MOSFET.”\n\nFinal answer: A",
        "format": "markdown",
        "sha256": "b0f77332c14395a89923595c5f2f71f3d33ee7bc4aa9595823feb8129de72275"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size and derives that gm increases linearly with overdrive in the square-law saturation model. It also accurately explains the fixed-current condition under which Student B’s claim would apply.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 237,
        "output_tokens": 1264,
        "total_tokens": 1501,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1030,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 237,
        "output_tokens": 1264,
        "total_tokens": 1501,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1030,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The saturation-region drain current of a long-channel MOSFET with fixed \\(W/L\\) is\n\\[\nI_D=\\frac12\\mu C_\\mathrm{ox}\\frac WL V_\\mathrm{ov}^2.\n\\]\nDifferentiating with respect to \\(V_\\mathrm{GS}\\) immediately yields the transconductance\n\\[\ng_m=\\mu C_\\mathrm{ox}\\frac WL V_\\mathrm{ov}.\n\\]\nThus \\(g_m\\) rises linearly with overdrive. (The alternative expression \\(g_m=2I_D/V_\\mathrm{ov}\\) does not contradict this result: when \\(W/L\\) is held constant, \\(I_D\\) itself grows as \\(V_\\mathrm{ov}^2\\), so the net dependence on overdrive remains positive.)\n\nStudent A is therefore correct.\n\nFinal answer: A",
        "format": "markdown",
        "sha256": "43e73e5425c36b32f096e0cb4ff0232755fed04b649ae575cc3bf5cf7413f02f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed W/L and explains that ID increases as Vov², so gm increases linearly with Vov.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 237,
        "output_tokens": 1308,
        "total_tokens": 1545,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1129,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 237,
        "output_tokens": 1308,
        "total_tokens": 1545,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1129,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The saturation-region drain current of a long-channel MOSFET (with fixed \\(W/L\\)) obeys\n\\[\nI_D=\\frac12\\mu C_{\\rm ox}\\frac{W}{L}V_{\\rm ov}^2.\n\\]\nDifferentiating with respect to gate-source voltage immediately yields the transconductance\n\\[\ng_m=\\mu C_{\\rm ox}\\frac{W}{L}V_{\\rm ov}.\n\\]\nThus \\(g_m\\) rises linearly with overdrive. (The equivalent expression \\(g_m=2I_D/V_{\\rm ov}\\) appears to suggest the opposite dependence only when \\(I_D\\) is artificially held constant, which requires a simultaneous change in device size; that is not the situation implied by “a MOSFET.”)\n\nFinal answer: A",
        "format": "markdown",
        "sha256": "878e33112953763bf0d43b3d8192637b1de068f5333512e210df0dcce8e6e23b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A for fixed W/L and derives that gm increases linearly with Vov; it also explains the fixed-ID condition under which Student B’s claim would apply.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 237,
        "output_tokens": 1218,
        "total_tokens": 1455,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1046,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 237,
        "output_tokens": 1218,
        "total_tokens": 1455,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1046,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal (hybrid-\\(\\pi\\)) equivalent circuit of a MOSFET is obtained by linearizing the large-signal \\(I\\)-\\(V\\) characteristics about a DC bias point. Because the linearization is performed on incremental voltages and currents, the resulting controlled sources (\\(g_m v_{gs}\\), \\(g_{mb} v_{bs}\\)) and the small-signal resistances and capacitances have identical topologies and polarities for both device types. Consequently the same equivalent circuit is used for NMOS and PMOS transistors (only the numerical values of the parameters differ).\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "fccdd546a3cc9fa970f0eb65ae1a43884285086ec7c04aa51922ad41a47a1f9b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly answers that the PMOS small-signal model has the same form as the NMOS model; the polarity details depend on the chosen sign conventions.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 227,
        "output_tokens": 634,
        "total_tokens": 861,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 511,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 227,
        "output_tokens": 634,
        "total_tokens": 861,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 511,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal (hybrid-\\(\\pi\\)) equivalent circuit of a MOSFET is obtained by linearizing the large-signal \\(I\\)-\\(V\\) equations about a DC bias point. Because the resulting incremental relationships among \\(v_{gs}\\), \\(v_{bs}\\), \\(i_d\\), etc., have exactly the same algebraic form for an NMOS device and a PMOS device (all small-signal parameters \\(g_m\\), \\(g_{mb}\\), \\(r_o\\), \\(C_{gs}\\), \\(C_{gd}\\), \\ldots being defined as positive quantities), the two equivalent circuits are identical in topology and in the polarity conventions of the controlled sources.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "ab8315a0b1b3cdc2d18b1daa0ea415696be622712694dbce3ba9cd7d4da628bc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly answers yes and identifies that the PMOS model has the same small-signal form; with consistent source-referenced voltage and current conventions, the model is equivalent in structure.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 227,
        "output_tokens": 708,
        "total_tokens": 935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 227,
        "output_tokens": 708,
        "total_tokens": 935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal (hybrid-\\(\\pi\\)) equivalent circuit of a MOSFET is obtained by linearizing the large-signal \\(I\\)-\\(V\\) characteristics about a DC bias point. Because the functional form of those characteristics (and of the associated terminal capacitances) is the same for an NMOS and a PMOS device, the resulting small-signal network is identical: a voltage-controlled current source \\(g_m v_{gs}\\) (plus the body-effect source \\(g_{mb} v_{bs}\\) if the bulk is not tied to the source) in parallel with the output resistance \\(r_o\\), together with the three capacitors \\(C_{gs}\\), \\(C_{gd}\\) and \\(C_{sb}\\). All polarities and signs are absorbed into the definitions of the small-signal voltages and currents, so the same schematic is used for both device types.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "967262bc8ea412a8b1e77e606a3105586113fd7720c54e97158be3ee70b14d55"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says the PMOS model is the same in form as the NMOS model, with polarity handled by consistent sign conventions, satisfying the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 227,
        "output_tokens": 813,
        "total_tokens": 1040,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 627,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 227,
        "output_tokens": 813,
        "total_tokens": 1040,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 627,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a diode-connected NMOS (gate shorted to drain). Thus \\(V_{GS}=V_{DS}=V_X\\) and \\(I_X\\) is the drain current of \\(M_1\\).\n\n- For \\(V_X\\le V_{TH}\\) the device is off, so \\(I_X=0\\).\n- For \\(V_X>V_{TH}\\) the device is saturated and\n  \\[\n  I_X=\\frac12\\mu_nC_{ox}\\frac{W}{L}(V_X-V_{TH})^2.\n  \\]\n\nThe resulting \\(I_X\\)-\\(V_X\\) sketch is identically zero for all negative and small positive \\(V_X\\), then rises as a parabola once \\(V_X\\) exceeds \\(V_{TH}\\).\n\nFinal answer: \\(I_X=0\\) (\\(V_X\\le V_{TH}\\)); \\(I_X\\propto(V_X-V_{TH})^2\\) (\\(V_X>V_{TH}\\))",
        "format": "markdown",
        "sha256": "d359184b2707c20bf48d71d3b2e8ece858d1dc1d82ab59f3c1bad945c4d4c9e5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives negligible current below threshold, and shows the quadratic rise above threshold. The negative-voltage detail is outside the essential point.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1247,
        "output_tokens": 2472,
        "total_tokens": 3719,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1247,
        "output_tokens": 2472,
        "total_tokens": 3719,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a diode-connected NMOS (gate shorted to drain). Thus \\(V_{GS}=V_{DS}=V_X\\) and \\(I_X=I_D\\).\n\n- For \\(V_X<V_{TH}\\) the device is in cutoff, so \\(I_X=0\\).\n- For \\(V_X\\ge V_{TH}\\) the device is in saturation, so\n  \\[\n  I_X=\\frac12\\mu_nC_{ox}\\frac{W}{L}(V_X-V_{TH})^2.\n  \\]\n\nThe resulting \\(I_X\\)-\\(V_X\\) sketch is identically zero until \\(V_X=V_{TH}\\) and then rises quadratically.\n\n(The parasitic body-drain diode that would conduct for large negative \\(V_X\\) is normally omitted from this sketch.)",
        "format": "markdown",
        "sha256": "f0dd557d2d3e899782e0eb486b8c048360446875b29f0a6274694e3ef88c1e7b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold and a quadratic rise above threshold, with the device in saturation. The negative-voltage diode note is optional.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1247,
        "output_tokens": 1991,
        "total_tokens": 3238,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1247,
        "output_tokens": 1991,
        "total_tokens": 3238,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows a diode-connected NMOS (gate shorted to drain). Thus \\(V_{GS}=V_{DS}=V_X\\) and the device operates in saturation whenever it is on.\n\n- \\(I_X=0\\) for all \\(V_X\\le V_{TH}\\)\n- \\(I_X=\\frac12\\mu_nC_{ox}(W/L)(V_X-V_{TH})^2\\) for \\(V_X>V_{TH}\\)\n\n(The body diode is neglected, as is conventional for this type of sketch.) The resulting \\(I_X\\)-\\(V_X\\) curve is identically zero until \\(V_{TH}\\) and then follows a parabola.\n\nFinal answer: \\(I_X=0\\) (\\(V_X\\le V_{TH}\\)); \\(I_X\\propto(V_X-V_{TH})^2\\) (\\(V_X>V_{TH}\\))",
        "format": "markdown",
        "sha256": "509792c61873b1fd7c16b901bdbbd7dfde75d42c3d455bc79c768d291df8d095"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its saturation operation when on, and the zero-then-quadratic I_X–V_X characteristic. Neglecting body-diode effects is acceptable for this sketch.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1247,
        "output_tokens": 3361,
        "total_tokens": 4608,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1247,
        "output_tokens": 3361,
        "total_tokens": 4608,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of an NMOS device \\(M_1\\) whose drain current is supplied through a series diode from a 1 V source. Consequently \\(I_X=I_D\\) only when the diode is forward-biased.\n\n- For \\(V_X<V_{TH}\\) the MOSFET is off, the diode carries no current and \\(I_X=0\\).\n- Once \\(V_X>V_{TH}\\) the MOSFET turns on and pulls its drain node down until the diode conducts. The drain-source voltage of \\(M_1\\) is then clamped at the nearly constant value \\(V_{DS}\\approx1-V_{D,\\text{on}}\\) (a few hundred millivolts).\n- Immediately above threshold \\(V_{OV}<V_{DS}\\) so \\(M_1\\) is saturated and \\(I_X\\) follows the usual square-law characteristic.\n- For still larger \\(V_X\\) one has \\(V_{OV}>V_{DS}\\), \\(M_1\\) enters triode, and \\(I_X\\) rises essentially linearly with \\(V_X\\).\n\nThe resulting sketch is therefore identically zero up to \\(V_{TH}\\), a short quadratic segment, and then a straight line of positive slope.\n\nFinal answer: \\(I_X=0\\) (\\(V_X<V_{TH}\\)); then sat. then triode",
        "format": "markdown",
        "sha256": "417d2b352f1da7212bd59f8fea2cf6c0325c08eb31fe265295d70b026093fdac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct qualitative zero, quadratic, then roughly linear shape and identifies saturation-to-triode behavior. But it invents a series diode and a reduced, clamped drain voltage; the drain is held at 1 V, so the transition is at VTH + 1 V. This is a significant topology error.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1383,
        "output_tokens": 4083,
        "total_tokens": 5466,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1383,
        "output_tokens": 4083,
        "total_tokens": 5466,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit applies a fixed \\(V_{DS} \\approx 1\\,\\text{V}\\) to NMOS \\(M_1\\) while \\(V_{GS}=V_X\\). Consequently \\(I_X=I_D\\) follows the usual MOSFET transfer characteristic:\n\n- \\(I_X=0\\) for all \\(V_X\\le V_{TH}\\),\n- \\(I_X=\\frac12\\mu_nC_{ox}(W/L)(V_X-V_{TH})^2\\) (saturation) once \\(V_X>V_{TH}\\) provided \\(V_X<1+V_{TH}\\),\n- the curve then becomes linear in the triode region for still larger \\(V_X\\).\n\n(The precise value of \\(V_{TH}\\) is not given, so it is simply marked on the \\(V_X\\) axis.)\n\n```\nI_X\n  |          /\n  |         /\n  |        /\n  |       /\n  |      /\n  |     /\n  |____/_______________ V_X\n      V_TH\n```",
        "format": "markdown",
        "sha256": "cec03029dc6faee4abf7ba4029e200120323fda645ecec46d118b40f973458eb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, quadratic saturation region up to VX = VTH + 1 V, and roughly linear triode-region rise beyond it.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1383,
        "output_tokens": 7056,
        "total_tokens": 8439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1383,
        "output_tokens": 7056,
        "total_tokens": 8439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit applies a constant \\(V_{DS}=1\\,\\text{V}\\) to NMOS transistor \\(M_1\\) while \\(V_{GS}=V_X\\) is swept. Consequently \\(I_X=I_D\\) follows the standard MOSFET transfer characteristic:\n\n- \\(I_X=0\\) for \\(V_X\\le V_{TH}\\) (cutoff);\n- \\(I_X=\\frac12\\mu_nC_{ox}(W/L)(V_X-V_{TH})^2\\) for \\(V_{TH}<V_X<V_{TH}+1\\) (saturation);\n- \\(I_X=\\mu_nC_{ox}(W/L)\\bigl[(V_X-V_{TH})-\\frac12\\bigr]\\) for \\(V_X>V_{TH}+1\\) (triode).\n\nThe two pieces meet with continuous value and slope at the saturation/triode boundary, so the plot is a parabola that becomes a straight line of slope \\(\\mu_nC_{ox}(W/L)\\).\n\nFinal answer: \\(I_X=0\\) (\\(V_X\\le V_{TH}\\)); sat. parabola then triode line",
        "format": "markdown",
        "sha256": "111aea0322d68d69742e24771710dbd064ff57445da5be666e37f9acc2149d79"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation parabola, and transition to a continuous, roughly linear triode-region rise at V_X = V_TH + 1 V; the triode expression is correct for V_DS = 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1383,
        "output_tokens": 5569,
        "total_tokens": 6952,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5317,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1383,
        "output_tokens": 5569,
        "total_tokens": 6952,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5317,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The MOSFET \\(M_1\\) has both its gate and source terminals tied to ground, so \\(V_{GS}=0\\). For a standard enhancement-mode device this places \\(M_1\\) in cutoff (\\(V_{GS}<V_t\\)), where \\(I_D=0\\) independent of \\(V_{DS}\\) (neglecting breakdown). The resulting open-circuit behavior is not that of a useful current source.\n\nFinal answer: no",
        "format": "markdown",
        "sha256": "6133263701e83f51f1046d5421b28b5429db2c0919fe33a048c182b03c75270e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misreads the PMOS connections as having gate and source grounded and concludes it is off, missing the diode-connected PMOS’s low impedance—the exact reasoning the golden solution assigns 0.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 659,
        "output_tokens": 3374,
        "total_tokens": 4033,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3282,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 659,
        "output_tokens": 3374,
        "total_tokens": 4033,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3282,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure depicts an enhancement-mode MOSFET \\(M_1\\) whose gate and source terminals are both tied to ground (hence \\(V_{GS}=0\\)). For an enhancement device this bias places the transistor firmly in cutoff, so the drain current is identically zero for all \\(V_{DS}\\) that do not forward-bias a junction or cause breakdown. A current source, by definition, must deliver a well-defined, essentially voltage-independent current; a device that simply remains off does not satisfy that requirement.\n\nFinal answer: no",
        "format": "markdown",
        "sha256": "8141a60ca234ac97622d161a8c19e3971aea57107a4c04698ac9b171f2583793"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the connections and concludes the device is off at VGS = 0. M1 is a diode-connected PMOS that presents low impedance, so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 640,
        "input_tokens": 659,
        "output_tokens": 3642,
        "total_tokens": 4301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3534,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 640,
        "input_tokens": 659,
        "output_tokens": 3642,
        "total_tokens": 4301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3534,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure depicts a MOSFET \\(M_1\\) whose gate and source terminals are both tied to ground (hence \\(V_{GS}=0\\)). For a standard enhancement-mode device this bias places the transistor in cutoff, so the drain current is ideally zero for any \\(V_{DS}\\) that does not cause breakdown. A current source, by definition, must deliver a well-defined, essentially constant current; a device that simply remains off does not satisfy that requirement.\n\nFinal answer: no",
        "format": "markdown",
        "sha256": "6a0005ed1a82047d30e53e75494336d8061bc40a4ec5320d2a810ccc263fea65"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the connections: M1’s source is the top terminal, not grounded; its gate and drain are grounded, making it a diode-connected PMOS. It therefore misses the low-impedance reason it cannot act as a current source and incorrectly concludes it is off.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 659,
        "output_tokens": 2445,
        "total_tokens": 3104,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2346,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 659,
        "output_tokens": 2445,
        "total_tokens": 3104,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2346,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a PMOS common-source amplifier with source degeneration.\n\n**DC operation** (saturation assumed): Current flows from \\(V_{DD}\\) through \\(R_S\\), the PMOS channel (source to drain), and \\(R_D\\) to ground. \\(V_\\text{out}=I_D R_D\\).\n\n**Small-signal voltage gain** (body effect and \\(r_o\\) neglected):\n\\[\nA_v=\\frac{v_\\text{out}}{v_\\text{in}}=-\\frac{g_m R_D}{1+g_m R_S}.\n\\]\n(The stage is inverting; degeneration by \\(R_S\\) reduces \\(|A_v|\\) and increases linearity.) Input resistance is infinite; the driving-point resistance at the output node is \\(R_D\\) (to first order).\n\nFinal answer: \\(A_v=-g_m R_D/(1+g_m R_S)\\)",
        "format": "markdown",
        "sha256": "51e047a5b0341adfc24052085d2e64daac7f69ffd35b9994b6b1a8ddb0267782"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a PMOS common-source stage with source degeneration and gives the inverting gain specified by the full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1430,
        "output_tokens": 3389,
        "total_tokens": 4819,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1430,
        "output_tokens": 3389,
        "total_tokens": 4819,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **PMOS common-source amplifier** with source degeneration.\n\n- \\(M_1\\) is a PMOS FET (source at top, toward \\(V_{DD}\\)).\n- Input \\(V_\\text{in}\\) is applied to the gate.\n- Output \\(V_\\text{out}\\) is taken at the drain.\n- \\(R_S\\) provides source degeneration; \\(R_D\\) is the drain (load) resistor.\n\n**Qualitative behavior** (assuming saturation):\n- Increasing \\(V_\\text{in}\\) reduces \\(|V_{GS}|\\), which reduces \\(|I_D|\\).\n- Thus \\(V_\\text{out}=I_D R_D\\) falls, so the amplifier is **inverting**.\n\n**Small-signal voltage gain** (low frequency, neglecting \\(r_o\\) and body effect):\n\\[\nA_v=\\frac{v_\\text{out}}{v_\\text{in}}=-\\frac{g_m R_D}{1+g_m R_S}.\n\\]\n\n(The degeneration factor \\(1+g_m R_S\\) simultaneously reduces gain, increases input/output resistance, and improves linearity.)",
        "format": "markdown",
        "sha256": "a02a77f00615cf3f2acfdb07d38e5d098537dca394f7a5f0c628b3dfbd110bbf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain \u0000-g_mR_D/(1+g_mR_S)\u0000 under the stated assumptions.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1430,
        "output_tokens": 1640,
        "total_tokens": 3070,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1430,
        "output_tokens": 1640,
        "total_tokens": 3070,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **PMOS common-source amplifier** with source degeneration.\n\n- \\(M_1\\) is a p-channel MOSFET (source at the higher-potential terminal).\n- Input \\(V_\\text{in}\\) is applied to the gate.\n- Source degeneration resistor \\(R_S\\) appears between the source and \\(V_{DD}\\).\n- Load resistor \\(R_D\\) appears between the drain and ground; the output \\(V_\\text{out}\\) is taken at the drain.\n\nThe stage is inverting. Neglecting channel-length modulation (and body effect), the small-signal voltage gain is\n\\[\nA_v=-\\frac{g_m R_D}{1+g_m R_S}.\n\\]",
        "format": "markdown",
        "sha256": "853c02e92a78338d62d3b93330d330f801a37a777456f1d5ca1c1f317e32c66f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain −gm RD/(1 + gm RS).",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1430,
        "output_tokens": 2641,
        "total_tokens": 4071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2485,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1430,
        "output_tokens": 2641,
        "total_tokens": 4071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2485,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower** (common-drain amplifier).\n\n- \\(M_1\\) is an n-channel MOSFET with drain tied to \\(V_{DD}\\) (AC ground), gate as input, and source as output.\n- \\(R_S\\) sets the DC bias current \\(I_D = V_\\text{out}/R_S\\).\n- The MOSFET operates in saturation for typical bias (\\(V_{DD} > V_\\text{in}-V_{th}\\)).\n\n**DC relation** (square-law, saturation):\n\\[\nV_\\text{out}=V_\\text{in}-V_{GS},\\qquad I_D=\\frac12\\mu_nC_\\text{ox}\\frac{W}{L}(V_{GS}-V_{th})^2=\\frac{V_\\text{out}}{R_S}.\n\\]\nThus \\(V_\\text{out}\\) follows \\(V_\\text{in}\\) with a \\(V_{GS}\\) offset that depends on current (and therefore on \\(R_S\\)).\n\n**Small-signal voltage gain** (body tied to source, \\(r_o\\to\\infty\\)):\n\\[\nA_v=\\frac{v_\\text{out}}{v_\\text{in}}=\\frac{g_mR_S}{1+g_mR_S}<1.\n\\]\nThe circuit therefore acts as a unity-gain buffer with low output impedance \\(\\approx1/g_m\\).",
        "format": "markdown",
        "sha256": "fd250c9a40f11649ed976a1abb179bb79633bcff5a80c1236033e0cb59aa074d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain. The additional output-impedance and bias discussion does not undermine the essential answer.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1199,
        "output_tokens": 1511,
        "total_tokens": 2710,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1197,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1199,
        "output_tokens": 1511,
        "total_tokens": 2710,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1197,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower** (common-drain amplifier).\n\n- \\(M_1\\) is an NMOS transistor with its drain tied to \\(V_{DD}\\), gate driven by \\(V_{in}\\), and source connected to load resistor \\(R_S\\) (to ground).\n- \\(V_{out}\\) is taken at the source terminal.\n\n**DC/large-signal behavior** (saturation assumed):\n\\[\nI_D = \\frac{V_{out}}{R_S} = \\frac{1}{2}k_n(V_{GS}-V_{th})^2,\\qquad V_{GS}=V_{in}-V_{out}.\n\\]\nThus \\(V_{out}=V_{in}-V_{GS}\\) with \\(V_{GS}>V_{th}\\) set by the current through \\(R_S\\).\n\n**Small-signal behavior**:\nThe voltage gain is\n\\[\nA_v=\\frac{g_m R_S}{1+g_m R_S}\\approx 1\n\\]\n(non-inverting, near-unity gain, low output impedance \\(\\approx 1/g_m\\)).\n\nThis topology is typically used as a voltage buffer.",
        "format": "markdown",
        "sha256": "9764722ae86c23dc4d2800ee3b1f6d94e4f37d5ffe552050bcdf5f27880667ea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS source follower and gives its positive, less-than-unity gain expression. The output-resistance and buffer comments are also consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1199,
        "output_tokens": 1114,
        "total_tokens": 2313,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1199,
        "output_tokens": 1114,
        "total_tokens": 2313,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source follower (common-drain stage). \\(M_1\\) operates in saturation for typical bias (\\(V_{DD}>V_{in}-V_{th}\\)). The DC relation is \\(V_{out}=V_{in}-V_{GS}\\), where the current \\(I_D=V_{out}/R_S\\) sets \\(V_{GS}\\) via the square-law equation. The small-signal gain (neglecting \\(r_o\\)) is\n\\[\nA_v=\\frac{g_mR_S}{1+(g_m+g_{mb})R_S}<1.\n\\]\nThe circuit therefore provides a DC level shift of \\(V_{GS}\\) together with near-unity voltage buffering and a low output resistance \\(\\approx1/(g_m+g_{mb})\\).",
        "format": "markdown",
        "sha256": "5b493a609f818d74b92387cee6629c37cd57caab836a5bb96179bc8623776d2d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, sub-unity gain, including the valid body-effect refinement. The DC level shift and high-gain-limit output resistance are also consistent.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1199,
        "output_tokens": 1112,
        "total_tokens": 2311,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 937,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1199,
        "output_tokens": 1112,
        "total_tokens": 2311,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 937,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-gate (CG) NMOS amplifier**.\n\n- \\(M_1\\) is an NMOS device with its gate DC-biased at the constant voltage \\(V_{DD}\\) (AC ground).\n- The signal input \\(V_\\text{in}\\) is applied to the source.\n- The signal output \\(V_\\text{out}\\) is taken at the drain, which is loaded by \\(R_D\\).\n\n**DC operation** (saturation assumed):\n\\[\nV_{GS}=V_{DD}-V_\\text{in},\\qquad\nI_D=\\frac12\\mu C_{ox}\\frac{W}{L}(V_{DD}-V_\\text{in}-V_{th})^2,\n\\]\n\\[\nV_\\text{out}=V_{DD}-I_DR_D.\n\\]\nAn increase in \\(V_\\text{in}\\) therefore reduces \\(I_D\\) and raises \\(V_\\text{out}\\) (non-inverting characteristic). Saturation requires the IR drop on \\(R_D\\) to remain smaller than \\(V_{th}\\).\n\n**Small-signal behavior** (body effect neglected):\n- Voltage gain \\(A_v\\approx +g_mR_D\\) (non-inverting).\n- Input impedance looking into the source \\(\\approx1/g_m\\) (low).\n- Output impedance \\(\\approx R_D\\).\n\nThe stage is consequently used as a non-inverting voltage amplifier or as a current buffer.",
        "format": "markdown",
        "sha256": "c52c184ec2b526ddfec973907ffbf920c928fe2b6ac0c9c5f3bfac11fdb82c8b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology with source input and AC-grounded gate, and gives the correct non-inverting gain and low source input resistance. The additional DC analysis is consistent with the stated saturation assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1172,
        "output_tokens": 3816,
        "total_tokens": 4988,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3500,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1172,
        "output_tokens": 3816,
        "total_tokens": 4988,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3500,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-gate (CG) amplifier** using an NMOS transistor \\(M_1\\) with resistive load \\(R_D\\).\n\n- Gate of \\(M_1\\) is AC-grounded (tied to the DC supply \\(V_{DD}\\)).\n- Input \\(V_\\text{in}\\) is applied at the source.\n- Output \\(V_\\text{out}\\) is taken at the drain.\n\n**DC operation:** \\(V_{GS}=V_{DD}-V_\\text{in}\\). The device conducts when \\(V_\\text{in}<V_{DD}-V_{th}\\).\n\n**Small-signal behavior (body effect neglected):**\n- \\(v_{gs}=-v_\\text{in}\\)\n- Drain current \\(i_d=g_m v_{gs}=-g_m v_\\text{in}\\)\n- \\(v_\\text{out}=-i_d R_D=+g_m R_D\\,v_\\text{in}\\)\n\nThus the voltage gain is non-inverting:\n\\[\nA_v=\\frac{v_\\text{out}}{v_\\text{in}}\\approx g_m R_D\n\\]\n(input resistance \\(\\approx1/g_m\\), output resistance \\(\\approx R_D\\)).\n\nThe same polarity is observed large-signal: raising the source voltage reduces \\(V_{GS}\\) and therefore the current through \\(R_D\\), so \\(V_\\text{out}\\) rises.",
        "format": "markdown",
        "sha256": "9363874ba1022e0bb276d51d590bda08eac1b6c05e9f16921f766156d6f0f338"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input common-gate topology, gives the non-inverting gain and approximate input resistance, and explains the signal polarity. The stated output resistance is consistent with neglecting transistor output resistance.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1172,
        "output_tokens": 2387,
        "total_tokens": 3559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2076,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1172,
        "output_tokens": 2387,
        "total_tokens": 3559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2076,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-gate (CG) amplifier**. \\(M_1\\) is an NMOS device whose gate is AC-grounded at \\(V_{DD}\\), with the input applied to the source and the output taken at the drain.\n\n**Large-signal behavior**\n- \\(M_1\\) is off for \\(V_\\text{in}>V_{DD}-V_{th}\\), so \\(V_\\text{out}=V_{DD}\\).\n- For \\(V_\\text{in}<V_{DD}-V_{th}\\) the device turns on. While it remains in saturation (\\(V_\\text{out}>V_{DD}-V_{th}\\))\n  \\[\n  V_\\text{out}=V_{DD}-\\frac{k_n}{2}R_D(V_{DD}-V_{th}-V_\\text{in})^2.\n  \\]\n  Further reduction of \\(V_\\text{in}\\) drives \\(M_1\\) into triode and \\(V_\\text{out}\\) continues to fall (approaching \\(V_\\text{in}\\) if \\(M_1\\) is strong enough).\n\nThe resulting voltage-transfer curve is **non-inverting**.\n\n**Small-signal parameters** (saturation, body effect neglected)\n- Voltage gain \\(A_v=+g_mR_D\\) (can be \\(>1\\)).\n- Input resistance looking into the source \\(\\approx1/g_m\\) (low).\n- Output resistance \\(\\approx R_D\\) (or \\(r_o\\parallel R_D\\)).\n\nBecause the gate is tied all the way to \\(V_{DD}\\), the drain can swing only \\(\\approx V_{th}\\) while remaining in saturation; the stage is therefore intended for small-signal operation about a bias point near \\(V_{DD}\\).\n\nFinal answer: CG amp (non-inv., \\(A_v=+g_m R_D\\))",
        "format": "markdown",
        "sha256": "c85e9e6f9877ae8524c001c1b715011211754ec6c2ab2e770deffba7fc415177"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input common-gate topology and gives the non-inverting gain and low input resistance. The additional large-signal and output-resistance discussion is consistent with the stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1172,
        "output_tokens": 5154,
        "total_tokens": 6326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1172,
        "output_tokens": 5154,
        "total_tokens": 6326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit as drawn consists of NMOS device \\(M_1\\) operating with a hard DC (and AC) ground at its source, a fixed gate bias \\(V_b\\), and a drain load \\(R_D\\). Capacitor \\(C_1\\) therefore simply shunts \\(V_\\text{in}\\) to ground and injects no signal into the transistor.\n\n**DC operating point**  \n- \\(V_S=0\\), \\(V_G=V_b\\) \\(\\implies V_{GS}=V_b\\).  \n- Provided \\(V_b>V_{TH}\\) the device conducts; in saturation  \n  \\[\n  I_D=\\frac12\\mu_nC_{ox}\\frac{W}{L}(V_b-V_{TH})^2\n  \\]\n  (neglecting \\(\\lambda\\)).  \n- \\(V_\\text{out}=V_{DD}-I_DR_D\\). Saturation further requires \\(V_\\text{out}>V_b-V_{TH}\\).\n\n**Small-signal behavior**  \nBecause both the source and the gate are AC grounds, \\(v_{gs}=0\\). Consequently the controlled source \\(g_mv_{gs}\\) is identically zero and \\(v_\\text{out}=0\\). The voltage gain is therefore\n\\[\nA_v=\\frac{v_\\text{out}}{v_\\text{in}}=0.\n\\]\n(\\(C_1\\) merely loads the input source; it does not couple any AC current into \\(M_1\\).)\n\nThe topology would become a functional common-gate amplifier only if the explicit ground at the source were replaced by a high-impedance DC current source (or a large resistor). In that case the source node could follow \\(v_\\text{in}\\) and a gain \\(\\approx g_mR_D\\) would appear. As drawn, however, the circuit produces no output signal.",
        "format": "markdown",
        "sha256": "349bab3c4f9c5aae56c8737b7fcf7e47c40a59474743999c6e32b62dd7ec36bc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input cannot create a small-signal source voltage and the ideal gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1689,
        "output_tokens": 6100,
        "total_tokens": 7789,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5697,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1689,
        "output_tokens": 6100,
        "total_tokens": 7789,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5697,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-gate (CG) amplifier** using NMOS transistor \\(M_1\\).\n\n- Gate of \\(M_1\\) is held at DC bias \\(V_b\\) (AC ground).\n- Input \\(V_\\text{in}\\) is AC-coupled to the source via \\(C_1\\).\n- Output \\(V_\\text{out}\\) is taken at the drain, with load \\(R_D\\) to \\(V_{DD}\\).\n\n(The explicit ground at the source provides the DC bias path; a high-impedance current source is implied for proper AC operation, otherwise the source node is shorted and the gain is zero.)\n\n**Small-signal behavior** (mid-band, \\(C_1\\) short):\n- Voltage gain \\(A_v = v_\\text{out}/v_\\text{in} \\approx +g_m R_D\\) (non-inverting).\n- Input resistance \\(R_\\text{in} \\approx 1/g_m\\).\n- Output resistance \\(R_\\text{out} \\approx R_D\\).\n\nThe stage is typically biased in saturation (\\(V_{DS} > V_{GS}-V_{th}\\)) so that \\(M_1\\) acts as a transconductance.",
        "format": "markdown",
        "sha256": "91151e01238647813f3da9bf436640b3d001d141d8ba2ae2a7d510ff4dcd0555"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It notices that the source-ground short would force zero gain, but incorrectly treats a high-impedance current source as implied and gives the shown circuit the usual common-gate gain. The source short is the decisive feature.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1689,
        "output_tokens": 4991,
        "total_tokens": 6680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4719,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1689,
        "output_tokens": 4991,
        "total_tokens": 6680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4719,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit as drawn consists of NMOS device \\(M_1\\) whose source is tied directly to ground (both DC and AC). The gate is held at a fixed bias \\(V_b\\), so \\(V_{GS}=V_b\\) is constant. The drain is loaded by \\(R_D\\) to \\(V_{DD}\\) and taken as the output.\n\nBecause the source node is a hard ground, capacitor \\(C_1\\) simply appears from \\(V_{in}\\) to ground and never modulates any terminal of \\(M_1\\). Consequently \\(v_{gs}=0\\), the small-signal drain current is identically zero, and\n\\[\n\\frac{v_{out}}{v_{in}}=0.\n\\]\n(The DC voltage at the drain is simply the quiescent drop \\(V_{DD}-I_D R_D\\), whose precise value depends on the region of operation of \\(M_1\\) and on the numerical values of \\(V_b\\), \\(V_{TH}\\), \\(W/L\\), etc., none of which are given.)\n\n(The topology would become a classic common-gate stage if the explicit ground at the source were replaced by a current source or a large resistor that still permits the source voltage to move.)",
        "format": "markdown",
        "sha256": "71925a0d6a33b14655e2677d8024c3cca58e59eeac61511090703f27546cf44e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input cannot modulate the transistor and the ideal voltage gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1689,
        "output_tokens": 5312,
        "total_tokens": 7001,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5051,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1689,
        "output_tokens": 5312,
        "total_tokens": 7001,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5051,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a grounded-source CS amplifier (source of \\(M_1\\) at AC ground) whose small-signal dynamics are set by the capacitors \\(C_{GS}\\), \\(C_{GD}\\) and \\(C_{DB}\\). (\\(C_{SB}\\) is shorted by the source-ground connection and stores no energy.)\n\nThese three capacitors connect only two nodes that are not AC grounds (the gate node and the drain/output node). Equivalently, they form a single capacitive loop, so only two capacitor voltages are independent. Nodal analysis therefore yields a \\(2\\times 2\\) admittance matrix whose determinant is quadratic in \\(s\\). The transfer function \\(V_\\text{out}(s)/V_\\text{in}(s)\\) is consequently of order 2 and possesses two poles.\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "944109259fac163898657efb07febfcfab925a871832e728cb83c31407d97004"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that CSB is shorted to ground and that CGS, CGD, and CDB provide only two independent capacitor voltages, yielding two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1886,
        "output_tokens": 4517,
        "total_tokens": 6403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4342,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1886,
        "output_tokens": 4517,
        "total_tokens": 6403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4342,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-source amplifier. The source terminal of \\(M_1\\) is AC ground, so \\(C_{SB}\\) (connected between source and body, both at AC ground) is shorted and does not contribute a state variable.\n\nThis leaves the three capacitors \\(C_{GS}\\), \\(C_{GD}\\) and \\(C_{DB}\\). These three capacitors form a loop, so their voltages are linearly dependent. Equivalently, the small-signal circuit contains only two non-ground nodes (the gate and the drain). Nodal analysis therefore produces a \\(2\\times 2\\) admittance matrix whose determinant is quadratic in \\(s\\).\n\nThe resulting transfer function \\(V_\\text{out}/V_\\text{in}\\) consequently has a second-order denominator (two poles) and a first-order numerator (the familiar right-half-plane zero produced by \\(C_{GD}\\)).\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "36cca51e1ef53618015f8401aaf6e2694d1013beb7bf3db57fa7d4111f0fbd45"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that CSB is shorted by the grounded source and that the other three capacitors provide only two independent capacitor voltages, giving two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1886,
        "output_tokens": 8915,
        "total_tokens": 10801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8721,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1886,
        "output_tokens": 8915,
        "total_tokens": 10801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8721,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-source MOSFET amplifier (source terminal at AC ground) with the parasitic capacitances of \\(M_1\\) shown explicitly. The capacitor \\(C_{SB}\\) appears directly across an ideal short and can therefore be removed from the network; it contributes neither a state variable nor a pole.\n\nThis leaves the three capacitors \\(C_{GS}\\), \\(C_{GD}\\) and \\(C_{DB}\\). These three elements form a purely capacitive loop, so their voltages are linearly dependent and only two of them can be chosen as independent state variables. Equivalently, nodal analysis performed at the two non-ground nodes (gate and drain) produces a \\(2\\times 2\\) admittance matrix whose determinant is quadratic in \\(s\\). The network is therefore of order 2.\n\n(The same conclusion is reached by the general formula for the order of complexity of an \\(RC\\) circuit: \\(N=N_C-N_{C\\text{-loops}}=3-1=2\\).)\n\nThus the transfer function \\(V_\\text{out}(s)/V_\\text{in}(s)\\) has exactly two poles.\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "eab1abd44e76eb1620cda94580862d7786645466250f5a87f40fdf8315616cb5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that CSB is shorted out and that CGS, CGD, and CDB form a loop with only two independent capacitor voltages, giving two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1886,
        "output_tokens": 8382,
        "total_tokens": 10268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1886,
        "output_tokens": 8382,
        "total_tokens": 10268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-gate NMOS stage (\\(M_1\\)) with drain load \\(R_D\\) and a resistive voltage divider (\\(R_1\\), \\(R_2\\)) that samples \\(V_\\text{out}\\) and returns a fraction \\(\\beta=R_2/(R_1+R_2)\\) to the gate. This loop realizes negative feedback.\n\nBecause the source terminal is the input, \\(v_{GS}= \\beta v_\\text{out}-v_\\text{in}\\). With the usual small-signal model (infinite \\(r_o\\), no body effect) KCL at the drain node yields the exact voltage gain\n\\[\nA_v=\\frac{v_\\text{out}}{v_\\text{in}}=\\frac{g_m}{1/R_D+1/(R_1+R_2)+g_m\\beta}.\n\\]\nWhen \\(g_m\\) is large the expression collapses to the closed-loop value set by the divider,\n\\[\nA_v\\approx\\frac{1}{\\beta}=1+\\frac{R_1}{R_2}.\n\\]\n(The same result follows from the observation that \\(v_{GS}\\to0\\), so the gate simply follows the source and \\(V_F\\approx V_\\text{in}\\).)\n\nAt DC the finite \\(V_{GS}\\) of \\(M_1\\) appears as an offset:\n\\[\nV_\\text{out}=(V_\\text{in}+V_{GS})\\Bigl(1+\\frac{R_1}{R_2}\\Bigr).\n\\]\nThe topology therefore behaves as a non-inverting amplifier whose gain is fixed by \\(R_1/R_2\\), while \\(R_D\\) and \\(V_{DD}\\) only have to supply the required bias current. Input impedance remains low (\\(\\approx1/g_m\\)).",
        "format": "markdown",
        "sha256": "1871f87d74331fdd4250d73df6550f5019efe97188570c3aa9a0ef3bba54977d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback; its gain expression is equivalent to the exact closed-loop gain and gives the correct high-loop-gain limit. The extra DC and impedance comments are not required and do not undermine the essential analysis.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1574,
        "output_tokens": 4914,
        "total_tokens": 6488,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4514,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1574,
        "output_tokens": 4914,
        "total_tokens": 6488,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4514,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-gate NMOS stage (\\(M_1\\)) with drain resistor \\(R_D\\) and a resistive divider (\\(R_1,R_2\\)) that samples \\(V_\\text{out}\\) and returns a fraction \\(\\alpha=R_2/(R_1+R_2)\\) to the gate. The resulting loop is negative feedback.\n\nWhen \\(g_m\\) is large the incremental gate-source voltage collapses, forcing \\(v_F\\approx v_\\text{in}\\). Consequently the closed-loop voltage gain approaches the reciprocal of the divider ratio:\n\\[\n\\frac{v_\\text{out}}{v_\\text{in}}\\approx\\frac{R_1+R_2}{R_2}.\n\\]\n(The exact small-signal gain, finite \\(g_m\\) and loading included, is\n\\[\n\\frac{v_\\text{out}}{v_\\text{in}}=\\frac{g_m}{\\alpha g_m+1/R_D+1/(R_1+R_2)}.)\n\\]\nThe same high-\\(g_m\\) limit also shows that the circuit realizes a non-inverting amplifier whose DC offset is set by the (nearly constant) \\(V_{GS}\\) of \\(M_1\\).\n\nFinal answer: \\(A_v\\approx(R_1+R_2)/R_2\\) (CG + FB)",
        "format": "markdown",
        "sha256": "8db1ce6905952e9e490431f1783961d42125fffd28cb4798facdc2f728fd9995"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input stage, output-divider feedback to the gate, and negative feedback. Its exact gain is algebraically equivalent to the golden expression, and its high-loop-gain limit is correct.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1574,
        "output_tokens": 4752,
        "total_tokens": 6326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1574,
        "output_tokens": 4752,
        "total_tokens": 6326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit uses NMOS transistor \\(M_1\\) as a transconductor with the source terminal serving as the noninverting input and the gate serving as the inverting input. Resistors \\(R_1\\) and \\(R_2\\) close a voltage-series (negative) feedback loop around this transconductor, with feedback factor\n\\[\n\\beta=\\frac{R_2}{R_1+R_2}.\n\\]\nThe load seen by the drain is\n\\[\nR_L=R_D\\parallel(R_1+R_2).\n\\]\nSmall-signal analysis (saturation, infinite Early resistance, no body effect) therefore yields the closed-loop voltage gain\n\\[\n\\frac{v_\\text{out}}{v_\\text{in}}=\\frac{g_m R_L}{1+g_m\\beta R_L}.\n\\]\nWhen the loop gain \\(g_m\\beta R_L\\gg1\\) the expression collapses to the ideal noninverting gain\n\\[\n\\frac{v_\\text{out}}{v_\\text{in}}\\approx1+\\frac{R_1}{R_2}.\n\\]\n(The same topology also raises the resistance seen at the source to \\(1/g_m+\\beta R_L\\).) Bias must keep \\(M_1\\) in saturation (\\(V_{DS}>V_{GS}-V_{th}\\)).\n\nFinal answer: \\(A_v=g_m R_L/(1+g_m\\beta R_L)\\approx1+R_1/R_2\\)",
        "format": "markdown",
        "sha256": "a65ba10bc4f9d0ac031efc1168bd37d2327bade96f9d8aaa11739cb302e3a662"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, divider feedback to the gate, and negative feedback. The load and closed-loop gain are correct, including the large-loop-gain limit; the additional source-resistance and bias comments do not detract.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1574,
        "output_tokens": 6754,
        "total_tokens": 8328,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1574,
        "output_tokens": 6754,
        "total_tokens": 8328,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower** (common-drain amplifier) with an NMOS current-source load.\n\n- **M1** is the follower device: drain at \\(V_{DD}\\), gate = \\(V_{\\text{in}}\\), source = \\(V_{\\text{out}}\\).\n- **M2** is a current sink that sets the bias current of M1: gate held at constant \\(V_b\\), source at ground, drain tied to \\(V_{\\text{out}}\\).\n\nBoth devices are biased in saturation for analog operation. The DC current is fixed by M2\n\\[\nI_D \\approx \\frac12\\mu_nC_{\\rm ox}\\Bigl(\\frac{W}{L}\\Bigr)_2(V_b-V_{TH})^2.\n\\]\nM1 therefore operates at a nearly constant \\(V_{GS}\\), producing the large-signal relation\n\\[\nV_{\\text{out}}=V_{\\text{in}}-V_{GS1}(I_D).\n\\]\n(The circuit is thus a unity-gain buffer with a DC level shift.)\n\nSmall-signal voltage gain (including body effect and finite \\(r_o\\)) is\n\\[\nA_v=\\frac{g_{m1}R_L}{1+(g_{m1}+g_{mb1})R_L},\\qquad R_L=r_{o1}\\parallel r_{o2}.\n\\]\nBecause \\(R_L\\) is large, \\(A_v\\) is close to (but slightly less than) unity. Input resistance is infinite at DC; output resistance is low (\\(\\approx1/(g_{m1}+g_{mb1})\\)).\n\nThe topology is commonly used for buffering, impedance transformation and DC level shifting.",
        "format": "markdown",
        "sha256": "71f2d4271f58ba58180e88f162d7f1e0a3face3c90939987401c40b5acaea6cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, and gives the positive, slightly sub-unity gain with body effect and finite output resistance.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1262,
        "output_tokens": 9746,
        "total_tokens": 11008,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9370,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1262,
        "output_tokens": 9746,
        "total_tokens": 11008,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9370,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source follower (common-drain stage) with M2 providing a current-source bias.\n\nM1 has its drain at AC ground (\\(V_{DD}\\)), gate as the input, and source as the output, so it operates as a source follower. M2 has a fixed gate bias \\(V_b\\) and thus acts as a high-impedance current sink that sets the DC current through M1.\n\n**DC behavior.**  \nThe current \\(I_D\\) is set by M2 (assuming saturation):\n\\[\nI_D=\\frac12\\mu_nC_{ox}(W/L)_2(V_b-V_{TH})^2(1+\\lambda V_{DS2}).\n\\]\nM1 carries the same current, producing a DC level shift\n\\[\nV_{out}=V_{in}-V_{GS1}(I_D).\n\\]\n\n**Small-signal voltage gain.**  \nWith the bulk of M1 tied to ground, body effect is present. KCL at the output node yields\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}.\n\\]\nWhen channel-length modulation is neglected the expression simplifies to\n\\[\nA_v\\approx\\frac{g_{m1}}{g_{m1}+g_{mb1}}=\\frac1{1+\\chi}<1,\n\\]\nwhere \\(\\chi=g_{mb}/g_m\\). Thus the circuit is a voltage buffer whose gain is close to (but less than) unity.\n\n**Port impedances.**  \n- Input resistance is infinite (gate of M1).  \n- Output resistance (gate of M1 AC-grounded) is low:\n\\[\nR_{out}\\approx\\frac1{g_{m1}+g_{mb1}}\\parallel r_{o2}\n\\]\n(the exact expression also includes a contribution from \\(r_{o1}\\)).\n\nThe stage is therefore commonly used to drive low-impedance loads while presenting a high input impedance.",
        "format": "markdown",
        "sha256": "f76381cbe94024e62d65513bd7f57af060393ecd48f548df267acbd00ee61b1f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, and derives a positive gain slightly below unity. The small-signal gain expression is appropriate; the output-resistance approximation's omission of ro1 is acknowledged as a refinement.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1262,
        "output_tokens": 5379,
        "total_tokens": 6641,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4934,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1262,
        "output_tokens": 5379,
        "total_tokens": 6641,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4934,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two NMOS transistors. \\(M_1\\) is configured as a source follower (common-drain stage) with its drain tied to \\(V_{DD}\\) and its source providing the output. \\(M_2\\) has a fixed gate bias \\(V_b\\) and therefore operates as a constant-current source that sets the quiescent current of \\(M_1\\).\n\nConsequently the circuit behaves as a DC level shifter / voltage buffer:\n- \\(V_\\text{out}\\approx V_\\text{in}-V_{GS1}\\), where \\(V_{GS1}\\) is fixed by the current of \\(M_2\\) (neglecting \\(\\lambda\\) and body effect);\n- small-signal voltage gain is slightly less than unity,\n  \\[\n  A_v=\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}\\approx 1;\n  \\]\n- output resistance is low (\\(\\approx 1/g_{m1}\\));\n- input resistance is infinite (gate of \\(M_1\\)).\n\nBoth devices remain in saturation provided \\(V_\\text{out}\\) stays high enough for \\(M_2\\) and \\(V_{DD}>V_\\text{in}-V_t\\) for \\(M_1\\).\n\nFinal answer: NMOS SF + NMOS CS load (buffer)",
        "format": "markdown",
        "sha256": "b7a670b0e5cb8edf701c83b15ae701c15cac4329faaa201e25de7b9b0a71a30a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, and gives a positive gain slightly below unity. The gain expression also accounts for body effect and output conductances.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1262,
        "output_tokens": 4634,
        "total_tokens": 5896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1262,
        "output_tokens": 4634,
        "total_tokens": 5896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a standard CMOS inverter (NOT gate).\n\n- \\(M_2\\) is a PMOS device with source tied to \\(V_{DD}\\).\n- \\(M_1\\) is an NMOS device with source tied to ground.\n- The gates of both transistors are driven by \\(V_{in}\\); the shared drain node is \\(V_{out}\\).\n\n**DC operation**\n- \\(V_{in}=0\\): \\(M_2\\) is on, \\(M_1\\) is off \\(\\rightarrow V_{out}=V_{DD}\\).\n- \\(V_{in}=V_{DD}\\): \\(M_2\\) is off, \\(M_1\\) is on \\(\\rightarrow V_{out}=0\\).\n\nThus \\(V_{out}=\\overline{V_{in}}\\). In the transition region both devices are saturated and the voltage-transfer curve exhibits the classic high-gain inversion characteristic of a CMOS inverter.",
        "format": "markdown",
        "sha256": "77b0536aead8a417f26d6b3f47ce11b8deca8a4dee8fdae4e9b698fe9cb04979"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its PMOS pull-up, NMOS pull-down, shared input, and complementary DC operation. The minor imprecision about saturation across the transition region does not contradict the essential answer.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 475,
        "output_tokens": 772,
        "total_tokens": 1247,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 577,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 475,
        "output_tokens": 772,
        "total_tokens": 1247,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 577,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** (NOT gate).\n\n- \\(M_2\\) is a PMOS transistor (source at \\(V_{DD}\\)).\n- \\(M_1\\) is an NMOS transistor (source at ground).\n- Both gates are driven by \\(V_{in}\\); the shared drain node is \\(V_{out}\\).\n\n**Operation:**\n- \\(V_{in}=0\\): \\(M_1\\) off, \\(M_2\\) on \\(\\rightarrow V_{out}=V_{DD}\\).\n- \\(V_{in}=V_{DD}\\): \\(M_1\\) on, \\(M_2\\) off \\(\\rightarrow V_{out}=0\\).\n\nThe circuit therefore implements logical inversion with (ideally) zero static power and a full-rail output swing.",
        "format": "markdown",
        "sha256": "2b5a9b5ec58a50f9418709b7943c0f2333e616ba48e9c3ae8b391968e18f1fe5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and their operation at both logic levels. This satisfies the full-credit rule.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 475,
        "output_tokens": 561,
        "total_tokens": 1036,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 391,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 475,
        "output_tokens": 561,
        "total_tokens": 1036,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 391,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** (NOT gate).\n\n- \\(M_1\\) is an NMOS transistor (source at ground).\n- \\(M_2\\) is a PMOS transistor (source at \\(V_{DD}\\)).\n- Both gates are driven by \\(V_{in}\\); the shared drain node is \\(V_{out}\\).\n\n**Operation**\n- \\(V_{in}=V_{DD}\\) (logic 1): \\(M_1\\) on, \\(M_2\\) off \\(\\rightarrow V_{out}=0\\).\n- \\(V_{in}=0\\) (logic 0): \\(M_1\\) off, \\(M_2\\) on \\(\\rightarrow V_{out}=V_{DD}\\).\n\nThe circuit therefore realizes the Boolean function \\(V_{out}=\\overline{V_{in}}\\) with rail-to-rail swing and (ideally) zero static power.",
        "format": "markdown",
        "sha256": "0444b5aef57966ab7656a02533363c7c871eee790bf34eacd9916c2089c5be29"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and their operation at both logic levels.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 475,
        "output_tokens": 885,
        "total_tokens": 1360,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 475,
        "output_tokens": 885,
        "total_tokens": 1360,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** (NOT gate), with PMOS transistor \\(M_1\\) (source at \\(V_{DD}\\)) and NMOS transistor \\(M_2\\) (source at ground). The gates are tied together as the input \\(V_\\text{in}\\) and the drains are tied together as the output \\(V_\\text{out}\\).\n\n- When \\(V_\\text{in}=0\\), \\(M_1\\) is on and \\(M_2\\) is off, so \\(V_\\text{out}=V_{DD}\\).\n- When \\(V_\\text{in}=V_{DD}\\), \\(M_1\\) is off and \\(M_2\\) is on, so \\(V_\\text{out}=0\\).\n\nThe circuit therefore realizes the logic function \\(V_\\text{out}=\\overline{V_\\text{in}}\\). It has rail-to-rail swing and (ideally) zero static power dissipation.\n\nFinal answer: CMOS inverter",
        "format": "markdown",
        "sha256": "f22e5e2a1e5d6565a8afd1cd884fec87af3714ea9df2932d29887bcb639f7054"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as an ordinary CMOS inverter. Both devices are NMOS, so this violates the task’s non-negotiable scoring rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 488,
        "output_tokens": 5330,
        "total_tokens": 5818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5122,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 488,
        "output_tokens": 5330,
        "total_tokens": 5818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5122,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter**.\n\n- **M1** is a PMOS transistor (source at \\(V_{DD}\\)).\n- **M2** is an NMOS transistor (source at ground).\n- Both gates are tied to \\(V_{in}\\); both drains are tied to \\(V_{out}\\).\n\n**Operation**\n- \\(V_{in}=0\\): M1 on, M2 off \\(\\rightarrow V_{out}=V_{DD}\\)\n- \\(V_{in}=V_{DD}\\): M1 off, M2 on \\(\\rightarrow V_{out}=0\\)\n\nThe circuit therefore implements the Boolean function \\(V_{out}=\\overline{V_{in}}\\). Static power dissipation is essentially zero (apart from leakage) because one of the two transistors is always off.",
        "format": "markdown",
        "sha256": "9a6c0ca0d32687470e7308b14bbf262f08ef6c385766562f2f9505e7cd892f2b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as PMOS and analyzes the circuit as a conventional CMOS inverter; the golden solution explicitly assigns zero for either error.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 488,
        "output_tokens": 894,
        "total_tokens": 1382,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 726,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 488,
        "output_tokens": 894,
        "total_tokens": 1382,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 726,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a standard **CMOS inverter**.\n\n- \\(M_1\\) is a PMOS transistor (source at \\(V_{DD}\\)).\n- \\(M_2\\) is an NMOS transistor (source at ground).\n- Both gates are driven by \\(V_{in}\\); the shared drain node is \\(V_{out}\\).\n\n**Operation:**\n- \\(V_{in}=0\\): \\(M_1\\) on, \\(M_2\\) off \\(\\rightarrow\\) \\(V_{out}=V_{DD}\\)\n- \\(V_{in}=V_{DD}\\): \\(M_1\\) off, \\(M_2\\) on \\(\\rightarrow\\) \\(V_{out}=0\\)\n\nThe circuit therefore realizes the Boolean function \\(V_{out}=\\overline{V_{in}}\\) with rail-to-rail swing and (ideally) zero static power.",
        "format": "markdown",
        "sha256": "109267bd697cf64397b8f11db525f16bddf8c9959225e9cdfef1e5f0569c27e5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as a PMOS and analyzes the circuit as a standard CMOS inverter. Both devices are NMOS, so the required device-identification rule assigns 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 488,
        "output_tokens": 1833,
        "total_tokens": 2321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1652,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 488,
        "output_tokens": 1833,
        "total_tokens": 2321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1652,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **depletion-load NMOS inverter**.\n\n**Structure:**\n- \\(M_1\\) is an enhancement-mode NMOS driver (source at ground, gate driven by \\(V_\\text{in}\\), drain at \\(V_\\text{out}\\)).\n- \\(M_2\\) is a depletion-mode NMOS load (drain at \\(V_{DD}\\), source at \\(V_\\text{out}\\)). Its gate is tied to its source, forcing \\(V_{GS2}=0\\).\n\n**DC operation (logic inverter):**\n- \\(V_\\text{in}\\) low (\\(<V_{TH1}\\)): \\(M_1\\) is off. The depletion load \\(M_2\\) remains on (\\(V_{GS}=0 > V_{TH2}\\), where \\(V_{TH2}<0\\)) and pulls \\(V_\\text{out}\\) all the way to \\(V_{DD}\\). Thus \\(V_{OH}=V_{DD}\\).\n- \\(V_\\text{in}\\) high (\\(>V_{TH1}\\)): \\(M_1\\) turns on and sinks current. The output low level \\(V_{OL}\\) is set by the relative strengths \\((W/L)_1/(W/L)_2\\). \\(M_1\\) is normally sized stronger so that \\(V_{OL}\\) lies close to 0.\n\nThe circuit therefore realizes logic inversion. (It can also be biased in the transition region and used as a high-gain analog inverting amplifier.)\n\nFinal answer: depletion-load NMOS inverter",
        "format": "markdown",
        "sha256": "f5f14a954f69e3ae84934784a0610177b8601a9ea4312ad871ce89bd9d206f1e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly recognizes an inverting stage with an NMOS driver, but misidentifies the load as a depletion-mode NMOS instead of a diode-connected PMOS and gives no valid gain analysis; the central topology is wrong.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 768,
        "input_tokens": 842,
        "output_tokens": 6965,
        "total_tokens": 7807,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 768,
        "input_tokens": 842,
        "output_tokens": 6965,
        "total_tokens": 7807,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-source stage consisting of enhancement NMOS driver \\(M_1\\) and a diode-connected PMOS load \\(M_2\\).\n\n**Large-signal behavior (inverter):**\n- \\(M_2\\) remains in saturation for all bias conditions (\\(V_{SD}=V_{SG}\\)).\n- \\(V_\\text{in}\\) low (\\(M_1\\) off) yields \\(V_{OH}=V_{DD}-|V_{tp}|\\).\n- \\(V_\\text{in}\\) high yields a low \\(V_{OL}\\) (exact value set by equating the linear-region current of \\(M_1\\) to the saturation current of \\(M_2\\)). Static current (hence static power) flows for a low output.\n\n**Small-signal behavior (amplifier):**\nBoth devices saturated gives\n\\[\nA_v=-\\frac{g_{m1}}{g_{m2}}\n\\]\n(neglecting channel-length modulation). The voltage gain is modest and the output resistance is low (\\(\\approx1/g_{m2}\\)).\n\nFinal answer: CS amp/inverter (NMOS drv + PMOS diode load)",
        "format": "markdown",
        "sha256": "2aaac1ec00839d11b7b0861b6511ffb1e0d693f919f397f67914c39793ff14a3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain \\(-g_{m1}/g_{m2}\\) under the stated channel-length-modulation assumption. The additional large-signal and output-resistance remarks are acceptable.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 842,
        "output_tokens": 12801,
        "total_tokens": 13643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12556,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 842,
        "output_tokens": 12801,
        "total_tokens": 13643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12556,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-source amplifier (or saturating inverter) using an enhancement-mode NMOS driver \\(M_1\\) and a diode-connected MOSFET load \\(M_2\\).\n\n- \\(M_1\\) operates as a transconductance device whose drain current is set by \\(V_\\text{in}\\).\n- \\(M_2\\) is connected as a MOS diode, presenting a small-signal resistance \\(1/g_{m2}\\) (plus the usual channel-length modulation terms).\n- Consequently the low-frequency voltage gain is simply\n  \\[\n  A_v = -g_{m1}/g_{m2}\n  \\]\n  (or \\(-\\sqrt{(W/L)_1\\mu_n/(W/L)_2\\mu_p}\\) when the devices are of opposite polarity and identically biased).\n- Large-signal behavior: \\(V_\\text{OH}=V_{DD}-|V_t|\\) of the load device; \\(V_\\text{OL}\\) can reach 0 V provided \\(M_1\\) is sized to remain in triode at the logic-low input.\n\nThe same topology is frequently used as a compact analog gain stage whose gain is set by a ratio of device sizes and is therefore first-order process-independent.",
        "format": "markdown",
        "sha256": "dcd99e9170b4b03c48866d4de684e022673b6480448299309c47ab50b5ad8bfe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "{\"score_0_to_4\":4,\"rationale\":\"Correctly identifies the common-source NMOS stage with a diode-connected opposite-polarity load and gives the inverting gain \\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[0m\\u001b[",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 842,
        "output_tokens": 4509,
        "total_tokens": 5351,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4240,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 842,
        "output_tokens": 4509,
        "total_tokens": 5351,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4240,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a PMOS device \\(M_2\\) and an NMOS device \\(M_1\\).\n\n- Source of \\(M_2\\) is tied to \\(V_{DD}\\), gate driven by \\(V_{\\rm in}\\), drain at \\(V_{\\rm out}\\).\n- Drain of \\(M_1\\) is tied to \\(V_{\\rm out}\\); both its gate and source are grounded, so \\(V_{GS1}=0\\).\n\nFor an enhancement-mode NMOS, \\(V_{GS1}=0<V_{TN}\\) keeps \\(M_1\\) in cutoff at all times (ideally zero current). Consequently there is never a DC path from \\(V_{\\rm out}\\) to ground.\n\nThe only active device is therefore the PMOS:\n- \\(V_{\\rm in}\\) low enough to satisfy \\(V_{SG2}>|V_{TP}|\\) turns \\(M_2\\) on and pulls \\(V_{\\rm out}\\) to \\(V_{DD}\\);\n- \\(V_{\\rm in}\\) high turns \\(M_2\\) off and leaves \\(V_{\\rm out}\\) floating (high-impedance node whose voltage is held only by capacitance).\n\nThe network is thus a dynamic pull-up that can set the output high but cannot reset it low. It is neither a static inverter nor a properly biased analog amplifier.",
        "format": "markdown",
        "sha256": "4cd8afd343e3818c59932b42ddbc89cb1c0a51ec173cac33c50cd70ffb329b26"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies M1 as an NMOS rather than a diode-connected PMOS load, so it misses the gm/gm amplifier and gives the opposite operating interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1640,
        "output_tokens": 6134,
        "total_tokens": 7774,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5854,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1640,
        "output_tokens": 6134,
        "total_tokens": 7774,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5854,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of PMOS transistor \\(M_2\\) (source at \\(V_{DD}\\)) and NMOS transistor \\(M_1\\) (source at ground). The gate of \\(M_1\\) is also grounded, so \\(V_{GS1}=0\\). Assuming standard enhancement-mode devices (\\(V_{TN}>0\\)), \\(M_1\\) is therefore permanently in cutoff and draws no current.\n\n- When \\(V_{in}=V_{DD}\\), \\(M_2\\) is also off. The output node is high-impedance (floating).\n- When \\(V_{in}=0\\), \\(M_2\\) turns on and charges \\(V_{out}\\) to \\(V_{DD}\\). Once \\(V_{out}\\) reaches \\(V_{DD}\\), \\(M_2\\) operates at the edge of the triode region with \\(I_D=0\\).\n\nThus the network simply precharges (or holds) \\(V_{out}\\) at \\(V_{DD}\\) whenever the input is low; there is never a DC path to ground.\n\nFinal answer: PMOS precharge (M1 always off)",
        "format": "markdown",
        "sha256": "05c8de621f308424f4347b7a5c07e3db0f265b9f4f65946033bda756519e7018"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS. It is a diode-connected PMOS load, so the claimed cutoff/floating-output behavior misses the circuit’s central gm/gm amplifier operation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1640,
        "output_tokens": 5865,
        "total_tokens": 7505,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5630,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1640,
        "output_tokens": 5865,
        "total_tokens": 7505,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5630,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit contains a PMOS device \\(M_2\\) (source at \\(V_{DD}\\)) whose gate is driven by \\(V_\\text{in}\\) and an NMOS device \\(M_1\\) (source at ground) whose gate is tied to ground. Consequently \\(V_{GS1}=0\\). For an enhancement-mode NMOS this places \\(M_1\\) permanently in cutoff, so there is never a DC path from \\(V_\\text{out}\\) to ground.\n\n- When \\(V_\\text{in}<V_{DD}-|V_{tp}|\\) the PMOS is on and charges \\(V_\\text{out}\\) all the way to \\(V_{DD}\\) (the device operates at the edge of the linear region with \\(V_{SD}=0\\)).\n- When \\(V_\\text{in}\\) is high enough to turn \\(M_2\\) off, both transistors are cut off and \\(V_\\text{out}\\) is high-impedance (the node simply holds its previous voltage).\n\nThe network therefore functions only as a high-side switch (or PMOS pass gate) that can pull a capacitive node to \\(V_{DD}\\) but cannot discharge it.",
        "format": "markdown",
        "sha256": "c566aa7ef1b96573ae7ce85c3f65deee0c729c3ddf46f9f8700bd1f3b59ca041"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS and therefore treats it as off, missing the essential topology: M1 is a diode-connected PMOS load. This leads to the incorrect high-impedance/high-side-switch conclusion instead of the gm/gm amplifier behavior.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1640,
        "output_tokens": 6200,
        "total_tokens": 7840,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1640,
        "output_tokens": 6200,
        "total_tokens": 7840,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a PMOS cascode. Both gates and \\(V_{DD}\\) are AC grounds. The resistance seen looking into the drain of \\(M_2\\) (with \\(v_{gs2}=0\\)) is simply \\(r_{o2}\\). This resistance appears in series with the source of \\(M_1\\).\n\nThe resistance looking into the drain of a MOSFET whose source is degenerated by \\(R_S\\) is\n\\[\nR_\\text{out}=r_o+(1+g_m r_o)R_S.\n\\]\nSubstituting the parameters of \\(M_1\\) and \\(R_S=r_{o2}\\) immediately yields\n\\[\nR_\\text{out}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}.\n\\]\n(The same result is obtained by applying a test voltage at the drain of \\(M_1\\), writing KCL at node \\(X\\), and computing \\(v_t/i_t\\). Body effect is omitted because the devices are drawn as three-terminal MOSFETs.)\n\nFinal answer: \\(r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\\)",
        "format": "markdown",
        "sha256": "0e855f79075985f2768ba4f5d114c7f8908a7078e5683382c3722917699fe78e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode with M1 as the cascode device and gives the correct output-resistance expression using gm1; omitting body effect is allowed.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2466,
        "output_tokens": 7436,
        "total_tokens": 9902,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2466,
        "output_tokens": 7436,
        "total_tokens": 9902,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a PMOS cascode. Both transistors are biased in saturation, with \\(V_{DD}\\) and the two gate biases treated as AC grounds. The resistance seen looking into the drain of \\(M_2\\) is simply \\(r_{o2}\\). This resistance appears in series with the source of the cascode device \\(M_1\\).\n\nThe small-signal resistance looking into the drain of a MOSFET whose source sees a degeneration resistance \\(R_S\\) is\n\\[\nr_o+(1+(g_m+g_{mb})r_o)R_S.\n\\]\nSubstituting \\(R_S=r_{o2}\\) immediately yields\n\\[\nR_\\text{out}=r_{o1}+[1+(g_{m1}+g_{mb1})r_{o1}]r_{o2}.\n\\]\n(The same expression is obtained by writing KCL at the intermediate node \\(X\\) and solving \\(v_t/i_t\\).) The dominant term is ordinarily \\((g_{m1}+g_{mb1})r_{o1}r_{o2}\\).\n\nFinal answer: \\(r_{o1}+[1+(g_{m1}+g_{mb1})r_{o1}]r_{o2}\\)",
        "format": "markdown",
        "sha256": "fc5e1b43e98f1faa830c8ffb591cb34912ad80722a2612c1ebdca326e82a4abf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode with M1 as the cascode device and gives the full output-resistance expression, including optional body effect.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2466,
        "output_tokens": 6449,
        "total_tokens": 8915,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6179,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2466,
        "output_tokens": 6449,
        "total_tokens": 8915,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6179,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a PMOS cascode current source. Transistor \\(M_2\\) has its source at \\(V_{DD}\\) (AC ground) and its gate at AC ground, so it contributes only its output resistance \\(r_{o2}\\) from node \\(X\\) to AC ground. Transistor \\(M_1\\) is therefore source-degenerated by \\(R_S=r_{o2}\\).\n\nThe resistance looking into the drain of a MOSFET whose source is degenerated by \\(R_S\\) (gate at AC ground, body effect neglected) is\n\\[\nR_\\text{out}=r_{o1}+(1+g_{m1}r_{o1})R_S.\n\\]\nSubstituting \\(R_S=r_{o2}\\) immediately yields\n\\[\nR_\\text{out}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}.\n\\]\n(The same expression is obtained by writing KCL at node \\(X\\) with the hybrid-\\(\\pi\\) models of both devices and solving \\(v_t/i_t\\).)\n\nWhen \\(g_{m}r_o\\gg1\\) the expression is dominated by the final term, so\n\\[\nR_\\text{out}\\approx g_{m1}r_{o1}r_{o2}.\n\\]\n\nFinal answer: \\(r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\\)",
        "format": "markdown",
        "sha256": "e1a99d44c57fad43c9b228763512c6717babe2f8506fbe0ed91fe35e7f9dd96a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode with M1 as the cascode device and gives the expected output resistance, with body effect neglected as permitted.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2466,
        "output_tokens": 24993,
        "total_tokens": 27459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24672,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2466,
        "output_tokens": 24993,
        "total_tokens": 27459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24672,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The devices shown are PMOS, so \\(M_2\\) (source at \\(V_{DD}\\)) operates in saturation provided its drain-source voltage exceeds the overdrive:\n\\[\nV_{DD}-V_X\\ge V_{SG2}-|V_{TH}|.\n\\]\nThis is equivalent to the drain-voltage condition\n\\[\nV_X\\le V_{b2}+|V_{TH}|.\n\\]\nBecause the two transistors are in series, \\(V_X\\) is set by the gate bias of \\(M_1\\):\n\\[\nV_X=V_{b1}+|V_{GS1}|.\n\\]\nHence a sufficiently low choice of \\(V_{b1}\\) places \\(V_X\\) at the value required by the inequality above and thereby keeps \\(M_2\\) in saturation.\n\nFinal answer: \\(V_X\\le V_{b2}+|V_{TH}|\\) (via \\(V_{b1}\\))",
        "format": "markdown",
        "sha256": "3f61106bc7408c9f154edb15b61aadbd3fade6d879a7571bc1e466bf248c404d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and relates VX to Vb1. Together these express the required bias condition, satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2380,
        "output_tokens": 5889,
        "total_tokens": 8269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5686,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2380,
        "output_tokens": 5889,
        "total_tokens": 8269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5686,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The devices are PMOS. For \\(M_2\\) the source sits at \\(V_{DD}\\) while the drain sits at node \\(X\\), so\n\\[\nV_{SD2}=V_{DD}-V_X,\\qquad V_{SG2}=V_{DD}-V_{b2}.\n\\]\nSaturation therefore requires\n\\[\nV_{DD}-V_X\\ge V_{SG2}-|V_{TH}|,\n\\]\nwhich rearranges at once to the drain-voltage condition\n\\[\nV_X\\le V_{b2}+|V_{TH}|.\n\\]\n(The precise numerical value of \\(V_X\\) is set by the gate bias \\(V_{b1}\\) of the cascode device \\(M_1\\).) \n\nFinal answer: \\(V_X \\le V_{b2}+|V_{TH}|\\)",
        "format": "markdown",
        "sha256": "0af8fe48671b4f07e8af249e7f2b5158f56126421ec8e0db455f435b81425874"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the PMOS saturation condition and notes that Vb1 sets VX, but does not give the relation between VX and Vb1 or derive the resulting condition on Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2380,
        "output_tokens": 6161,
        "total_tokens": 8541,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5979,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2380,
        "output_tokens": 6161,
        "total_tokens": 8541,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5979,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a PMOS cascode (M2 as the current-source device, M1 as the cascode device). For M2 to remain in saturation,\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TH2}|\\qquad\\Leftrightarrow\\qquad V_X\\le V_{b2}+|V_{TH2}|.\n\\]\nNode \\(X\\) is the source of M1, so its voltage is set by the gate bias of M1:\n\\[\nV_X=V_{b1}+V_{SG1}.\n\\]\nChoosing \\(V_{b1}\\) low enough that the inequality on \\(V_X\\) holds therefore keeps M2 in saturation (independent of the voltage at the output node).\n\nFinal answer: \\(V_X\\le V_{b2}+|V_{TH2}|\\) (via \\(V_{b1}\\))",
        "format": "markdown",
        "sha256": "66b97841c34579928c8a73c2b4b5c8ca77a47a1273d9d579b7abec648cfb7b11"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and relates VX to Vb1 through VX = Vb1 + VSG1, so the condition is set via Vb1 as required.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2380,
        "output_tokens": 7175,
        "total_tokens": 9555,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6989,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2380,
        "output_tokens": 7175,
        "total_tokens": 9555,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6989,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS cascode transconductance stage (common-source input device \\(M_1\\) stacked with cascode device \\(M_2\\)) loaded by an ideal current source \\(I_1\\).\n\n**DC bias**  \nBoth transistors operate in saturation. The bias current of the stack is set by \\(I_1\\). \\(V_{b1}\\) is chosen so that \\(V_X \\approx V_{b1}-V_{GS2}\\) keeps \\(M_1\\) saturated while still leaving sufficient headroom for \\(M_2\\). The DC input voltage at the gate of \\(M_1\\) is set to produce \\(I_D=I_1\\).\n\n**Small-signal behavior**  \n- \\(M_1\\) converts \\(v_\\text{in}\\) into a current \\(g_{m1}v_\\text{in}\\).  \n- \\(M_2\\) presents a low impedance \\(\\approx 1/g_{m2}\\) at node \\(X\\), so the voltage swing at the drain of \\(M_1\\) is only \\(\\approx v_\\text{in}\\). This suppresses the Miller multiplication of \\(C_{gd1}\\).  \n- The same current is forced through the high output resistance of the cascode,\n  \\[\n  R_\\text{out}\\approx g_{m2}r_{o2}r_{o1}\n  \\]\n  (body effect neglected). With an ideal current-source load the voltage gain is therefore\n  \\[\n  A_v=\\frac{v_\\text{out}}{v_\\text{in}}\\approx -g_{m1}g_{m2}r_{o1}r_{o2}.\n  \\]\nThe circuit thus simultaneously provides high gain, high output impedance, and reduced Miller capacitance relative to a simple common-source stage.",
        "format": "markdown",
        "sha256": "e2fe5c7c4c6a6a1a6394999015a3a1d284ad665f372c74cdcca7aba2bd3304a4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies M1 as the common-source NMOS input and M2 as the NMOS cascode, and gives the correct ideal-load gain with body effect omitted, meeting the golden full-credit rule. The claim that node X necessarily has low impedance and only a small swing is inaccurate for an ideal current-source load, but does not change the required topology and gain result.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1327,
        "output_tokens": 1406,
        "total_tokens": 2733,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1019,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1327,
        "output_tokens": 1406,
        "total_tokens": 2733,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1019,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a telescopic NMOS cascode (common-source + common-gate) amplifier with an ideal current-source load.\n\n- \\(M_1\\) is the CS input device (converts \\(v_\\text{in}\\) into a current).\n- \\(M_2\\) is the CG cascode device (biased by the DC voltage \\(V_{b1}\\)).\n- \\(I_1\\) is an ideal current-source load, so the small-signal load resistance is infinite.\n- Node \\(X\\) is the intermediate cascode node.\n\nBoth transistors are assumed to operate in saturation. The small-signal output resistance seen at \\(v_\\text{out}\\) is therefore the cascode resistance\n\\[\nR_\\text{out}=r_{o2}+\\bigl[1+(g_{m2}+g_{mb2})r_{o2}\\bigr]r_{o1}\\approx(g_{m2}r_{o2})r_{o1}.\n\\]\nThe transconductance of the stage is simply \\(g_{m1}\\), so the voltage gain is\n\\[\nA_v=\\frac{v_\\text{out}}{v_\\text{in}}=-g_{m1}R_\\text{out}\\approx-g_{m1}(g_{m2}r_{o2})r_{o1}.\n\\]\n(The body effect of \\(M_2\\) can be omitted if the source of \\(M_2\\) is tied to the substrate.) The cascode transistor keeps the drain-source voltage of \\(M_1\\) nearly constant, thereby suppressing the Miller multiplication of \\(C_{gd1}\\) and raising the amplifier’s output impedance (and gain) by roughly \\(g_{m2}r_{o2}\\).",
        "format": "markdown",
        "sha256": "f8e5df0a9d012a094465409f25bbfe32f84c45c68f63199ef26a0b58d085507d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the accepted cascode output resistance and gain expression. Omitting body effect in the approximation is allowed.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1327,
        "output_tokens": 1513,
        "total_tokens": 2840,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1327,
        "output_tokens": 1513,
        "total_tokens": 2840,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS cascode common-source amplifier with an ideal current-source load.\n\n**DC bias.** Both \\(M_1\\) and \\(M_2\\) operate in saturation with drain current \\(I_1\\). The source of the cascode device sits at\n\\[\nV_X=V_{b1}-V_{GS2}(I_1).\n\\]\nThis voltage must keep \\(M_1\\) saturated (\\(V_X>V_{in}-V_{TH1}\\)).\n\n**Small-signal gain.** With an ideal current source the AC current through the stack is identically zero. Consequently\n\\[\nv_x=-g_{m1}r_{o1}v_{in},\n\\]\nand the output voltage is\n\\[\nv_{out}=v_x\\bigl[1+(g_{m2}+g_{mb2})r_{o2}\\bigr].\n\\]\nThe voltage gain is therefore\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=-g_{m1}r_{o1}\\bigl[1+(g_{m2}+g_{mb2})r_{o2}\\bigr]\\approx-g_{m1}(g_{m2}+g_{mb2})r_{o1}r_{o2}.\n\\]\n(The body-effect term \\(g_{mb2}\\) vanishes if the bulk of \\(M_2\\) is tied to its source.)\n\n**Output resistance.** Looking into the drain of \\(M_2\\) (current source removed) yields the same high resistance\n\\[\nR_{out}=r_{o1}+r_{o2}+(g_{m2}+g_{mb2})r_{o1}r_{o2}\\approx(g_{m2}+g_{mb2})r_{o1}r_{o2}.\n\\]\nThus the amplifier realizes a transconductance \\(G_m\\approx g_{m1}\\) together with a very large \\(R_{out}\\), producing the high voltage gain derived above.\n\nNode \\(X\\) is a low-impedance node (\\(\\approx1/g_{m2}\\)) that shields \\(M_1\\) from voltage swing at the output, improving both gain and bandwidth relative to a simple common-source stage.",
        "format": "markdown",
        "sha256": "94745a0888d19b110796e7e6effe46c075a80f1eec808bd7c00314dc93162eb9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS common-source input and NMOS cascode and derives the equivalent ideal-load gain expression. The claim that node X is low impedance under an ideal current-source load is imprecise, but the stated full-credit rule applies.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1327,
        "output_tokens": 2657,
        "total_tokens": 3984,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2175,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1327,
        "output_tokens": 2657,
        "total_tokens": 3984,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2175,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a common-source NMOS (\\(M_1\\)) whose drain is stacked with a common-gate NMOS (\\(M_2\\)) that is biased at a constant voltage \\(V_{b1}\\). This CS-CG combination is the definition of a cascode stage (here realized with a resistive load \\(R_D\\)).\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "86a025f516f963abdf62fa810e7d778cc7778dd4dde707df82530e1ff75b6d34"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower, not a common-source NMOS stage, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1389,
        "output_tokens": 907,
        "total_tokens": 2296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 829,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1389,
        "output_tokens": 907,
        "total_tokens": 2296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 829,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a common-source NMOS (\\(M_1\\)) whose drain is stacked with a common-gate NMOS (\\(M_2\\)) that is biased by a DC voltage \\(V_{b1}\\). The output is taken at the drain of \\(M_2\\). This is the classic definition of a cascode (CS-CG) stage.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "b40dadb39f2849b76c8bcbb05b4d774e1f253ca63a89bb5cdd9402b725bee215"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Incorrectly calls the circuit a cascode and misidentifies M1: it is a PMOS source follower with its drain grounded, not a common-source NMOS stage.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1389,
        "output_tokens": 801,
        "total_tokens": 2190,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 720,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1389,
        "output_tokens": 801,
        "total_tokens": 2190,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 720,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a common-source NMOS (M1, driven by \\(V_\\text{in}\\)) stacked with a common-gate NMOS (M2, biased by the DC voltage \\(V_{b1}\\)) and a resistive load \\(R_D\\). This is the classic CS-CG cascode topology.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "be7db8ec803d742d70861edc251164fa71c38c0b28281f09d52ae980eb3de03d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower, not a common-source input device, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1389,
        "output_tokens": 582,
        "total_tokens": 1971,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 509,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1389,
        "output_tokens": 582,
        "total_tokens": 1971,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 509,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect arises because the \\(C_{gd}\\) (or \\(C_{bc}\\)) of a CS/CE device is multiplied by the voltage gain appearing across that capacitance, producing a large effective input capacitance that limits bandwidth. In a cascode the CS/CE device is loaded by the low input impedance (\\(\\approx 1/g_m\\)) of the following CG/CB device, so its voltage gain is only \\(\\approx -1\\). Consequently the Miller multiplication factor remains near 2 rather than \\(1+|A_v|\\), and the associated bandwidth penalty is greatly reduced. (The overall voltage gain is instead produced by the CG/CB stage, which itself experiences no Miller multiplication.)\n\nFinal answer: Miller gain of CS/CE stage \\(\\approx-1\\) (loaded by \\(1/g_m\\))",
        "format": "markdown",
        "sha256": "27ef5ca0da5cdbf39b0950d9d79049a1be99525fcc26a4a719b5d466730fde9d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node, the roughly −1 gain across the input device’s Cgd, and the resulting Miller factor near 2 rather than the full-stage-gain factor. The Miller effect is reduced, not eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 220,
        "output_tokens": 652,
        "total_tokens": 872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 482,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 220,
        "output_tokens": 652,
        "total_tokens": 872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 482,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect multiplies the feedback capacitance \\(C_\\mu\\) (or \\(C_{gd}\\)) of a CE/CS stage by the factor \\(1+|A_v|\\). In a cascode the CE/CS device sees the very low input impedance (\\(1/g_m\\)) of the following CB/CG device, so its own voltage gain is only \\(\\approx-1\\). Consequently the Miller multiplication remains of order 2 rather than of order \\(g_mR_L\\). The CB/CG stage itself contributes no Miller multiplication because its control terminal is AC-grounded.\n\nFinal answer: low \\(A_v\\) of CS/CE (load \\(=1/g_m\\))",
        "format": "markdown",
        "sha256": "42496035fd38fe5249315315002d1e2b1cb44ad36c9541a1308e154a02a2cdd7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the resulting gain across the input transistor’s Cgd of about −1, so the Miller factor is about 2 rather than set by the full stage gain. The comment about the common-gate stage is secondary.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 220,
        "output_tokens": 605,
        "total_tokens": 825,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 457,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 220,
        "output_tokens": 605,
        "total_tokens": 825,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 457,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect arises because the \\(C_{gd}\\) (or \\(C_\\mu\\)) of a CS/CE device is multiplied by the voltage gain appearing across that capacitor, producing a large effective input capacitance that limits bandwidth. In a cascode the CS/CE transistor is loaded by the low impedance \\(1/g_m\\) of the following CG/CB device, so its drain-to-gate voltage gain is only \\(\\approx-g_{m1}/g_{m2}\\) (typically \\(\\approx-1\\)). Consequently the Miller multiplication factor remains of order 2 rather than the large \\(A_v\\) of a simple CS/CE stage, while the overall voltage gain is still supplied by the CG/CB transistor.\n\nFinal answer: Miller mult. \\(\\approx2\\) (low \\(A_{v1}\\))",
        "format": "markdown",
        "sha256": "21b9b14df6de9c09cbcfeab8264e5862f7061ba1c8858def1a5e3551d34583b0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the resulting gain across the input transistor’s Cgd of roughly −1, giving a Miller factor near 2 rather than the full-stage gain. The omitted body-effect term is a minor approximation.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 220,
        "output_tokens": 559,
        "total_tokens": 779,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 390,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 220,
        "output_tokens": 559,
        "total_tokens": 779,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 390,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-gate (CG) amplifier** with active load:\n\n- \\(M_1\\) is a PMOS transistor with source at \\(V_{DD}\\) and gate biased by the constant voltage \\(V_{b2}\\). It operates as a current-source load.\n- \\(M_2\\) is an NMOS transistor with gate biased by the constant voltage \\(V_{b1}\\), source terminal as the signal input \\(V_{\\rm in}\\), and drain as the output \\(V_{\\rm out}\\).\n\nBoth devices are assumed to be biased in saturation. The topology yields a **non-inverting** voltage amplifier.\n\n**Small-signal parameters** (body effect neglected):\n\n- Voltage gain:\n\\[\nA_v = \\frac{v_{\\rm out}}{v_{\\rm in}} \\approx g_{m2}(r_{o1}\\parallel r_{o2})\n\\]\n(exact expression: \\(A_v=[g_{m2}+1/r_{o2}](r_{o1}r_{o2})/(r_{o1}+r_{o2})\\)).\n\n- Input resistance (looking into the source of \\(M_2\\)):\n\\[\nR_{\\rm in}\\approx\\frac{1}{g_{m2}}\\Bigl(1+\\frac{r_{o1}}{r_{o2}}\\Bigr)\n\\]\n(low, as expected for a CG stage).\n\n- Output resistance:\n\\[\nR_{\\rm out}=r_{o1}\\parallel r_{o2}.\n\\]\n\n(The same expressions with \\(g_{m2}\\) replaced by \\(g_{m2}+g_{mb2}\\) apply when body effect is included.)\n\nThe circuit therefore provides a modest voltage gain of the order of the intrinsic gain, together with the low input impedance that is characteristic of the common-gate configuration.",
        "format": "markdown",
        "sha256": "12ca109e32b6e2a620803dbb014d9cd7da32396947b0069f1fcf8f70e66a3105"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, source input, bias voltages, non-inverting gain, low input resistance, and the required gain expression. The additional small-signal expressions are consistent with the stated assumptions.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1262,
        "output_tokens": 7641,
        "total_tokens": 8903,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7249,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1262,
        "output_tokens": 7641,
        "total_tokens": 8903,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7249,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-gate (CG) amplifier** with an active PMOS load.\n\n- **M1** (PMOS) has its source at \\(V_{DD}\\) and gate held at the DC bias \\(V_{b2}\\). It therefore operates as a current source that supplies a (nominally) constant current into the output node and presents a high small-signal resistance \\(r_{o1}\\) as the amplifier load.\n- **M2** (NMOS) has its gate held at the DC bias \\(V_{b1}\\) (AC ground) while the input \\(V_{\\rm in}\\) is applied to its source. Its drain is the output node \\(V_{\\rm out}\\). This is the classic common-gate connection.\n\n**DC operating point.** Both devices must remain in saturation. For M2 this requires\n\\[\nV_{\\rm out}\\ge V_{\\rm in}-V_{TH2},\\qquad V_{GS2}=V_{b1}-V_{\\rm in}>V_{TH2}.\n\\]\n\\(V_{b1}\\) and \\(V_{b2}\\) are chosen so that the DC current of M1 equals that of M2 at the desired \\(V_{\\rm out}\\).\n\n**Small-signal behavior.**  \nBecause the gate of M2 is AC-grounded, an increase in \\(V_{\\rm in}\\) reduces \\(V_{GS2}\\) and therefore reduces the current sunk by M2. The excess current supplied by M1 charges the output node, so \\(V_{\\rm out}\\) rises. The amplifier is therefore **non-inverting**.  \n\nNeglecting body effect the low-frequency voltage gain is\n\\[\nA_v=\\frac{v_{\\rm out}}{v_{\\rm in}}\\approx +g_{m2}(r_{o1}\\parallel r_{o2}).\n\\]\n(The precise expression including \\(r_o\\) of M2 and body transconductance \\(g_{mb}\\) is only slightly more involved; the sign remains positive.) Input resistance looking into the source of M2 is low (\\(\\approx1/g_{m2}\\)), while the output resistance is high (\\(\\approx r_{o1}\\parallel r_{o2}\\)).\n\nThe topology is frequently used when a low input impedance, a non-inverting gain and a wide bandwidth are required (the CG stage has no Miller multiplication of \\(C_{gd}\\)).",
        "format": "markdown",
        "sha256": "47a357a80670440c8aa7f4a7588a506d566574a85db9ac6da9f1a7efd51cc98e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stage, source-driven input, PMOS current-source load, non-inverting gain, low input resistance, and the required gain approximation. The incorrect M2 saturation inequality is a secondary DC detail and does not contradict the essential answer under the full-credit rule.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1262,
        "output_tokens": 3277,
        "total_tokens": 4539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2777,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1262,
        "output_tokens": 3277,
        "total_tokens": 4539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2777,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-gate (CG) amplifier** with active load.\n\n- **M1** (PMOS) has a fixed gate bias \\(V_{b2}\\) and acts as a current-source load.\n- **M2** (NMOS) has a fixed gate bias \\(V_{b1}\\). The input \\(V_\\text{in}\\) is applied to its source and the output \\(V_\\text{out}\\) is taken from its drain.\n\nCurrent flows from \\(V_{DD}\\) through M1 and M2 to the (low-impedance) input source. The stage is non-inverting, has low input impedance (\\(\\approx 1/g_{m2}\\)) and high output impedance (\\(\\approx r_{o1}\\parallel r_{o2}\\)).\n\n**Small-signal voltage gain** (neglecting body effect):\n\\[\nA_v=\\frac{v_\\text{out}}{v_\\text{in}}\\approx g_{m2}(r_{o1}\\parallel r_{o2}).\n\\]",
        "format": "markdown",
        "sha256": "0f51f8e8d904b5fcc016187f8cf8a00afa15ba417b76dfe644e7fc9d5971e54f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, the input at M2’s source, the bias voltages, non-inverting operation, low input resistance, and the gain approximation specified by the full-credit rule.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1262,
        "output_tokens": 4389,
        "total_tokens": 5651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4169,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1262,
        "output_tokens": 4389,
        "total_tokens": 5651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4169,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is the high-frequency small-signal model of a common-source stage (M1) with an active current-source load (M2). The only dynamic nodes are the gate of M1 and the output node; all other terminals are AC ground.\n\nThe five capacitors therefore collapse to three distinct elements:\n- \\(C_\\text{GS}\\) (gate to ground),\n- \\(C_\\text{GD}\\) (gate to drain),\n- \\(C_L=C_\\text{DB}+C_\\text{GD2}+C_\\text{DB2}\\) (drain to ground).\n\nThese three capacitors form a single loop, so only two of them are independent. Nodal analysis of the two dynamic nodes consequently yields a characteristic equation of degree 2. The circuit therefore possesses exactly two poles.\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "91cc9347fffcdac6ab50dae9c81b644f3faea5fff9d12f8802934c77f4c18a4e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two dynamic nodes, assigns the capacitors to the gate and output nodes, and concludes the circuit has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1693,
        "output_tokens": 4929,
        "total_tokens": 6622,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4757,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1693,
        "output_tokens": 4929,
        "total_tokens": 6622,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4757,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal circuit contains exactly two non-ground nodes (the gate of \\(M_1\\) and the output node). All five capacitors that appear in the schematic reduce to an equivalent network consisting of\n- one capacitor from the gate node to ground,\n- one capacitor from the output node to ground, and\n- the floating capacitor \\(C_{GD}\\) that connects the two nodes.\n\nThese three capacitors form a single loop, so only two of the capacitor voltages are independent. Consequently the nodal admittance matrix is \\(2\\times 2\\) and its determinant is a quadratic polynomial in \\(s\\). The transfer function \\(V_\\text{out}/V_\\text{in}\\) is therefore of order 2 and possesses two poles.\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "e7446f46b805e422ee2bcfe4876ce52bf19d0b1286258791a1e55dd4fb7e3540"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the gate and output as the two dynamic nodes, assigns the capacitors to the right nodes, and concludes there are two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1693,
        "output_tokens": 5108,
        "total_tokens": 6801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1693,
        "output_tokens": 5108,
        "total_tokens": 6801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is the high-frequency small-signal model of a common-source stage (M1) with a current-source load (M2). All terminals connected to DC bias voltages (including the gate and source of M2) are AC grounds. This leaves exactly two nodes whose voltages are not fixed by independent sources: the gate of M1 and the output node.\n\nThe five capacitors appearing in the schematic therefore reduce to three distinct elements:\n- \\(C_\\text{GS}\\) (gate of M1 to ground),\n- \\(C_\\text{GD}\\) (gate of M1 to output),\n- \\(C_\\text{out}=C_\\text{DB}+C_\\text{DB2}+C_\\text{GD2}\\) (output to ground).\n\nThese three capacitors form a single loop, so only two of their voltages are independent. Equivalently, nodal analysis produces a \\(2\\times2\\) admittance matrix whose determinant is quadratic in \\(s\\). The transfer function \\(V_\\text{out}(s)/V_\\text{in}(s)\\) is therefore of order 2 and possesses two poles.\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "4b61465354cfd0ef5ed85938fadc60f1681a918d2120b59f64ad1b6203f5a385"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent nodes and assigns the capacitors to the gate and output nodes, concluding that the circuit has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1693,
        "output_tokens": 6256,
        "total_tokens": 7949,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1693,
        "output_tokens": 6256,
        "total_tokens": 7949,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a resistive-load NMOS inverter (inverting common-source stage) whose pull-down device is realized as a stack of two series NMOS transistors that share the same gate voltage \\(V_\\text{in}\\).\n\n- \\(M_1\\) (bottom device) has its source at ground, so \\(V_{GS1}=V_\\text{in}\\).\n- \\(M_2\\) (top device) has its source at the intermediate node, so \\(V_{GS2}=V_\\text{in}-V_X\\) (and normally experiences body effect).\n- The drain of \\(M_2\\) is the output node, loaded by \\(R_D\\) to \\(V_{DD}\\).\n\n**DC behavior**\n- \\(V_\\text{in}<V_{TH}\\): both transistors are off, \\(I_D=0\\), \\(V_\\text{out}=V_{DD}\\).\n- \\(V_\\text{in}\\) large: the stack conducts, \\(V_\\text{out}\\) is pulled down to a low value set by the on-resistance of the series combination versus \\(R_D\\). Because the transistors are stacked, the effective pull-down strength is weaker than that of a single device of the same \\(W/L\\), and \\(M_2\\)’s elevated source (plus body effect) raises the voltage needed to keep the whole stack in strong inversion.\n\nThe circuit therefore implements a logic inverter (or a low-gain inverting amplifier) whose VOL and switching threshold are degraded relative to a simple single-transistor NMOS inverter. Equivalence to a single MOSFET of twice the channel length holds only approximately and only when body effect and the unequal \\(V_{GS}\\) values can be neglected.",
        "format": "markdown",
        "sha256": "8465e07990af9f611f0d4be85be1f4e32ebdd2026b4c53bb3b27843333231c45"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-gate series NMOS stack and explicitly notes its approximate equivalence to a device with twice the channel length. However, it makes that equivalence depend on neglecting unequal VGS values, which are intrinsic to the stack, and omits the key triode-lower/saturated-upper operating-region explanation.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1432,
        "output_tokens": 2386,
        "total_tokens": 3818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2021,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1432,
        "output_tokens": 2386,
        "total_tokens": 3818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2021,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **resistive-load common-source (CS) stage** that uses a **self-cascode (composite) NMOS device** as the driver.\n\n- \\(M_1\\) and \\(M_2\\) are stacked NMOS transistors whose gates are tied together and driven by \\(V_\\text{in}\\). The source of \\(M_1\\) is grounded; the drain of \\(M_2\\) is the output node.\n- \\(R_D\\) is the passive load connected to \\(V_{DD}\\).\n- The composite transistor behaves as a single equivalent NMOS whose effective Early voltage (hence \\(r_o\\)) is substantially higher than that of a simple MOSFET of the same total length. Consequently the small-signal voltage gain \\(|A_v|=g_{m,\\text{eq}}(r_{o,\\text{eq}}\\parallel R_D)\\) is larger than that of a conventional CS stage.\n\n**Large-signal behavior**\n- \\(V_\\text{in}<V_{TH}\\): both devices are off \\(\\to V_\\text{out}=V_{DD}\\).\n- \\(V_\\text{in}>V_{TH}\\): the stack conducts and \\(V_\\text{out}\\) falls. \\(M_2\\) is normally kept in saturation while \\(M_1\\) operates in the triode (or moderate-inversion) region; the pair still satisfies the saturation condition of an ordinary MOSFET, \\(V_\\text{out}>V_\\text{in}-V_{TH}\\).\n\nThe circuit therefore inverts and can be used either as a high-gain analog amplifier or as a simple NMOS logic inverter.",
        "format": "markdown",
        "sha256": "4135e18c7eeb0918b40a03252f412dfda1f38b99268d357456f7664d99c28376"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the common-gate NMOS stack and the lower-triode/upper-saturated operating regions. However, it misses the essential result that the pair acts approximately like a device with effective channel length L1 + L2, and overstates the output-resistance gain relative to a device of the same total length.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1432,
        "output_tokens": 3598,
        "total_tokens": 5030,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3252,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1432,
        "output_tokens": 3598,
        "total_tokens": 5030,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3252,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a resistive-load CS amplifier whose driver device is a composite (series-connected) NMOS formed by M1–M2.\n\n- Both gates are tied to \\(V_\\text{in}\\), M1 source is grounded, and the M1 drain / M2 source node is left floating.\n- The pair is therefore electrically equivalent to a single MOSFET whose drawn length is \\(2L\\) (the intermediate node simply sits at the mid-point of the channel).\n- Consequently the effective transconductance parameter is halved relative to a single device of length \\(L\\), while the Early voltage (and therefore \\(r_o\\)) is doubled.\n- With a resistive load the large-signal transfer curve is the classic inverting characteristic of an NMOS inverter: \\(V_\\text{out}=V_{DD}\\) for \\(V_\\text{in}<V_\\text{th}\\) and \\(V_\\text{out}\\) falls as \\(V_\\text{in}\\) rises above threshold. The composite device remains in saturation provided \\(V_\\text{out}>V_\\text{in}-V_\\text{th}\\).\n- Body effect on M2 (its source sits above ground) slightly raises its threshold, so the two transistors cannot be perfectly identical to a uniform long-channel MOSFET, but the qualitative behavior is unchanged.\n\nSmall-signal gain is therefore \\(A_v=-g_{m,\\text{eq}}(R_D\\parallel r_{o,\\text{eq}})\\) with the reduced \\(g_m\\) and increased \\(r_o\\) of the composite transistor.",
        "format": "markdown",
        "sha256": "9ffead0bc33d7dc4f47abee6fa4b9a22112fe30894d3ecd686e276bc2be2a111"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS pair and its approximately doubled effective channel length. The added output-resistance and saturation discussion is consistent with the intended behavior; the minor midpoint wording does not change the essential conclusion.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1432,
        "output_tokens": 4091,
        "total_tokens": 5523,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3763,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1432,
        "output_tokens": 4091,
        "total_tokens": 5523,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3763,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a CD-CG amplifier (source follower M1 driving common-gate M2), equivalently viewed as an unbalanced MOSFET differential pair with tail current \\(I_1\\). Both devices operate in saturation with \\(I_{D1}+I_{D2}=I_1\\) and \\(V_\\text{out}=V_{DD}-I_{D2}R_D\\).\n\nNeglecting channel-length modulation, KCL at the source node yields the small-signal gain\n\\[\n\\frac{v_\\text{out}}{v_\\text{in}}=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D.\n\\]\n(If the transistors are matched this reduces to \\(g_m R_D/2\\). Body effect cancels in the matched case and does not change the result.)\n\nThe topology has no Miller multiplication of \\(C_{gd}\\) and is therefore wideband.",
        "format": "markdown",
        "sha256": "433220406f6d38533b080c01cb2c8ecea92d2b1665cf3f5985f50172c40f2fb9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower/common-gate topology and gives the non-inverting gain and current relation. The additional body-effect and bandwidth comments do not alter the essential answer.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2154,
        "output_tokens": 5443,
        "total_tokens": 7597,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5242,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2154,
        "output_tokens": 5443,
        "total_tokens": 7597,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5242,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a source-coupled NMOS pair (\\(M_1,M_2\\)) biased by the tail current \\(I_1\\). \\(M_1\\) is connected as a source follower (drain at \\(V_{DD}\\)) whose source drives the source terminal of \\(M_2\\). \\(M_2\\) therefore operates as a common-gate device with a resistive load \\(R_D\\).\n\nAssuming matched devices in saturation and neglecting channel-length modulation and body effect, the small-signal source voltage is the result of a voltage divider formed by the two source resistances \\(1/g_m\\):\n\n\\[\nv_s=\\frac{v_{\\rm in}}{2}.\n\\]\n\nThe current that consequently flows in \\(M_2\\) is\n\n\\[\ni_{d2}=-g_m\\frac{v_{\\rm in}}{2}.\n\\]\n\nThis current produces the output voltage\n\n\\[\nv_{\\rm out}=-i_{d2}R_D=\\frac{g_m R_D}{2}v_{\\rm in}.\n\\]\n\nHence the voltage gain is non-inverting and equal to\n\n\\[\nA_v=\\frac{v_{\\rm out}}{v_{\\rm in}}=\\frac{g_m R_D}{2}.\n\\]\n\n(The same result is obtained by treating the pair as a differential amplifier with one drain tied to \\(V_{DD}\\) and a single-ended output taken from the opposite drain.)\n\nFinal answer: \\(A_v = g_m R_D / 2\\)",
        "format": "markdown",
        "sha256": "e66ce0103762703544d3b6abbfd7e3d5d5215062aa431b9414572765ef2fe975"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair as a source follower driving a common-gate stage and gives the correct non-inverting gain, including the matched-device result.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2154,
        "output_tokens": 3439,
        "total_tokens": 5593,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3107,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2154,
        "output_tokens": 3439,
        "total_tokens": 5593,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3107,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source-coupled (differential) pair biased by tail current \\(I_1\\). \\(M_1\\) and \\(M_2\\) are assumed matched. The drain of \\(M_1\\) is tied directly to \\(V_{DD}\\) while \\(M_2\\) is loaded by \\(R_D\\), yielding a single-ended output. Gate \\(V_b\\) is a DC bias, so the pair is driven single-ended at \\(V_{\\rm in}\\).\n\n**DC bias** (matched devices, \\(V_{\\rm in}=V_b\\)):  \n\\[\nI_{D1}=I_{D2}=I_1/2,\\qquad V_{\\rm out}=V_{DD}-R_D\\cdot I_1/2.\n\\]\n\n**Small-signal voltage gain** (neglecting \\(\\lambda\\) and body effect):  \nThe constant tail current forces \\(i_{d1}+i_{d2}=0\\). Solving the two transconductance equations gives \\(v_s=v_{\\rm in}/2\\) and  \n\\[\nA_v=\\frac{v_{\\rm out}}{v_{\\rm in}}=+\\frac{g_m R_D}{2},\n\\]  \nwhere \\(g_m\\) is evaluated at \\(I_1/2\\). The positive sign follows because an increase in \\(V_{\\rm in}\\) raises the common-source node, reduces \\(I_{D2}\\) and therefore reduces the drop across \\(R_D\\).\n\n(The same result is obtained by viewing \\(M_1\\) as a source follower loaded by \\(1/g_m\\) of \\(M_2\\), followed by the common-gate stage \\(M_2\\).)",
        "format": "markdown",
        "sha256": "a3817fb82a9e0c9817497f5e8a1d305fe9495bab78886e2ee936f2cea86a552b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a source-coupled pair/source follower driving a common-gate stage, and gives the correct non-inverting gain of approximately gm RD/2.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2154,
        "output_tokens": 3376,
        "total_tokens": 5530,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3012,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2154,
        "output_tokens": 3376,
        "total_tokens": 5530,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3012,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a source follower (M1) biased by current source M2. For the small-signal output impedance, ground \\(V_\\text{in}\\) (so \\(R_S\\) appears from the gate of M1 to AC ground) and ignore the high parallel resistance of M2. This yields\n\\[\nZ_\\text{out}(s)=\\frac{1+sR_SC_\\text{gs}}{g_m+sC_\\text{gs}}.\n\\]\nThe imaginary part of \\(Z_\\text{out}(j\\omega)\\) is positive (inductive) whenever \\(R_S>1/g_m\\). Equivalently, \\(Z_\\text{out}\\) transitions from its low-frequency value \\(1/g_m\\) to its high-frequency value \\(R_S\\); the transition is inductive when \\(R_S>1/g_m\\).\n\nFinal answer: \\(Z_{out}=(1+s R_S C_{gs})/(g_m+s C_{gs})\\) (inductive if \\(R_S>1/g_m\\))",
        "format": "markdown",
        "sha256": "d23435429e111f481d3ccc7ac5fe47fa8e578c190db99785059da261e7cd5c0e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower, gives the appropriate output-impedance expression, and explains the low-to-high-frequency transition and inductive condition.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1567,
        "output_tokens": 3722,
        "total_tokens": 5289,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3484,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1567,
        "output_tokens": 3722,
        "total_tokens": 5289,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3484,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source follower (M1) biased by current source M2. To obtain the output impedance, ground \\(V_\\text{in}\\) for AC analysis and look into the source of M1 (the finite resistance of M2 appears in parallel and does not change the conclusions below).\n\nNeglecting all parasitics except \\(C_\\text{gs}\\) of M1 yields\n\\[\nZ_\\text{out}(s)=\\frac{1}{g_{m1}}\\frac{1+sC_\\text{gs}R_S}{1+sC_\\text{gs}/g_{m1}}.\n\\]\nFor frequencies below the pole \\(g_{m1}/C_\\text{gs}\\) this simplifies to the series combination of a resistor \\(1/g_{m1}\\) and an inductor\n\\[\nL_\\text{eq}=\\frac{C_\\text{gs}R_S}{g_{m1}}.\n\\]\n(The same inductive behavior appears whenever \\(R_S>1/g_{m1}\\), because the zero then precedes the pole and \\(|Z_\\text{out}|\\) rises with frequency.)\n\nFinal answer: \\(L_\\text{eq}=C_{gs}R_S/g_{m1}\\) (series with \\(1/g_{m1}\\))",
        "format": "markdown",
        "sha256": "173c37c490916888b37de399268caa995de5dec97c445a9ef954b6ec6ee2c6cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the source follower, gives the correct impedance, and explains the inductive trend for RS > 1/gm. However, the stated equivalent inductance omits the 1/gm correction; in the low-frequency expansion it is Cgs(RS − 1/gm)/gm.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1567,
        "output_tokens": 3220,
        "total_tokens": 4787,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2941,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1567,
        "output_tokens": 3220,
        "total_tokens": 4787,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2941,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a source follower (M1) biased by current source M2. For the output impedance, set \\(V_\\text{in}=0\\) (so the gate of M1 is grounded through \\(R_S\\)) and look into the source of M1.\n\nUsing the small-signal model of M1 (including \\(C_\\text{gs}\\)) yields\n\\[\nZ_\\text{out}(s)=\\frac{1+sR_SC_\\text{gs}}{g_m+sC_\\text{gs}}.\n\\]\nAt low frequencies this equals \\(1/g_m\\). When \\(R_S>1/g_m\\) a zero occurs before the pole, so \\(|Z_\\text{out}|\\) rises with frequency (positive phase) over a finite band and the impedance is inductive. Equivalently, a low-frequency expansion produces a series inductance\n\\[\nL=\\frac{C_\\text{gs}}{g_m}\\Bigl(R_S-\\frac1{g_m}\\Bigr).\n\\]\n(The finite output resistance of M2 appears in parallel but does not cancel the inductive term.)\n\nFinal answer: \\(Z_\\text{out}=(1+s R_S C_{gs})/(g_m+s C_{gs})\\) (inductive if \\(R_S>1/g_m\\))",
        "format": "markdown",
        "sha256": "28fc07e9352225d41ab03c952af7f89447ae796a8d9b1a31042cfdf64307c1a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower, derives the output-impedance expression, and explains that for R_S > 1/g_m the zero precedes the pole, producing a rising, inductive impedance. The low-frequency inductance approximation is also correct.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1567,
        "output_tokens": 3478,
        "total_tokens": 5045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3186,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1567,
        "output_tokens": 3478,
        "total_tokens": 5045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3186,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit uses \\(M_2\\) as a square-law I-V converter for the input current. With \\(M_2\\) in saturation,\n\\[\nI_\\text{in}=\\frac12\\mu_nC_\\text{ox}\\Bigl(\\frac W L\\Bigr)_2(V_\\text{out}-V_\\text{TH})^2,\n\\]\nwhich inverts to\n\\[\nV_\\text{out}=V_\\text{TH}+\\sqrt{\\frac{2I_\\text{in}}{\\mu_nC_\\text{ox}(W/L)_2}}.\n\\]\n(The same relation holds incrementally, giving the transimpedance \\(v_\\text{out}/i_\\text{in}=1/g_{m2}\\).)\n\n\\(M_1\\) and \\(R_{D1}\\) form a common-source stage whose only role is to establish the drain voltage of \\(M_2\\):\n\\[\nV_X=V_\\text{TH}+\\sqrt{\\frac{2(V_{DD}-V_\\text{out})}{R_{D1}\\mu_nC_\\text{ox}(W/L)_1}}.\n\\]\nSaturation of both devices then requires \\(|V_X-V_\\text{out}|<V_\\text{TH}\\).\n\n(The loop formed by the two transistors is regenerative. Channel-length modulation yields a loop gain \\(g_{m1}(R_{D1}\\parallel r_{o1})\\cdot g_{m2}r_{o2}\\); the bias point derived above is stable only when this product is kept below unity.)\n\nFinal answer: \\(V_{out}=V_{TH}+\\sqrt{2I_{in}/[k_n(W/L)_2]}\\)",
        "format": "markdown",
        "sha256": "b355cb44db9b7df7f299a2b2bc367c9f403a1e0b94366b265b6c2b8b57e3e5dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer uses Vout as M2’s gate control, identifies the regenerative M1–M2 loop, and correctly notes that a stable bias requires loop gain below unity. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1956,
        "output_tokens": 14141,
        "total_tokens": 16097,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13769,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1956,
        "output_tokens": 14141,
        "total_tokens": 16097,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13769,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a cross-coupled NMOS pair. Consequently \\(I_{D2}=I_\\text{in}\\) with \\(V_{GS2}=V_\\text{out}\\). Provided \\(M_2\\) remains in saturation,\n\\[\nV_\\text{out}=V_{TH}+\\sqrt{\\frac{2I_\\text{in}}{\\mu_nC_{ox}(W/L)_2}}.\n\\]\nThe resistor \\(R_{D1}\\) then sets\n\\[\nI_{D1}=(V_{DD}-V_\\text{out})/R_{D1},\n\\]\nso the voltage at node \\(X\\) is the corresponding \\(V_{GS}\\) of \\(M_1\\). Both devices stay in saturation only when\n\\[\nV_X>V_\\text{out}-V_{TH},\\qquad V_\\text{out}>V_X-V_{TH}.\n\\]\n(The same topology produces positive feedback; the saturation-region bias point is therefore usable only when the loop gain is kept below unity.)\n\nFinal answer: \\(V_{out}=V_{TH}+\\sqrt{2I_{in}/[\\mu_n C_{ox}(W/L)_2]}\\)",
        "format": "markdown",
        "sha256": "a2e49c93157d176943475beeefe5a56cdfe96b2e0acdf9d3dffd6e1a323bc60d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the cross-coupled positive-feedback topology and states that a usable saturation-region bias requires loop gain below unity, a correct stability consequence. Its saturation equations are consistent with the stated device assumptions.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 1956,
        "output_tokens": 14259,
        "total_tokens": 16215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14004,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 1956,
        "output_tokens": 14259,
        "total_tokens": 16215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14004,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a cross-coupled NMOS pair (\\(M_1\\) gate tied to \\(M_2\\) drain at node \\(X\\), \\(M_2\\) gate tied to \\(M_1\\) drain). \\(M_1\\) has a passive pull-up \\(R_{D1}\\) and the output is taken at its drain; the independent current \\(I_\\text{in}\\) is injected at node \\(X\\).\n\nThe cross-coupling produces positive feedback. Consequently the equilibrium obtained by assuming both devices remain in saturation,\n\\[\nV_\\text{out}=V_\\text{th}+\\sqrt{\\frac{2I_\\text{in}}{k_{n2}}},\n\\]\nis unstable (the small-signal resistance seen at \\(X\\) is negative and the resulting pole lies in the right half-plane).\n\nA stable DC operating point exists only for sufficiently small \\(I_\\text{in}\\). In that regime \\(M_1\\) is cut off, \\(V_\\text{out}=V_{DD}\\) and \\(M_2\\) operates in the linear region as a grounded resistor:\n\\[\nI_\\text{in}=k_{n2}\\Bigl[(V_{DD}-V_\\text{th})V_X-V_X^2/2\\Bigr],\\qquad V_X<V_\\text{th}.\n\\]\nThe largest current that can be accepted in this state is the value that brings \\(V_X\\) exactly to \\(V_\\text{th}\\). Any larger \\(I_\\text{in}\\) triggers regenerative switching; \\(V_\\text{out}\\) collapses toward zero while node \\(X\\) charges without bound.\n\n(The same conclusions are reached from a complete small-signal model that retains finite \\(r_o\\); the transimpedance evaluated about the unstable saturation point is still \\(\\approx1/g_{m2}\\).)",
        "format": "markdown",
        "sha256": "eae2602b133b4316eb351746768191fd64c55a8742980ee35a92d7e198c41135"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as connected to Vout rather than its drain, recognizes the positive-feedback loop, and states the negative-resistance/RHP-pole instability. Its stable low-current branch also matches the golden solution; saying X charges “without bound” rather than to the source compliance limit is a minor imprecision.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 1956,
        "output_tokens": 21737,
        "total_tokens": 23693,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21347,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 1956,
        "output_tokens": 21737,
        "total_tokens": 23693,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21347,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a shunt-shunt feedback transimpedance amplifier (TIA). \\(M_1\\) is a common-gate input stage (biased by \\(V_b\\)) whose drain drives the common-source voltage-gain stage \\(M_2\\). Resistive feedback \\(R_F\\) samples the output voltage and returns a current to the input node.\n\nUnder the usual high-loop-gain approximation the closed-loop transimpedance is\n\\[\n\\frac{V_\\text{out}}{I_\\text{in}}\\approx -R_F.\n\\]\n(The loop is inverting, so the sign is negative.) The same feedback also lowers the already-small input impedance of the common-gate device well below \\(1/g_{m1}\\).\n\nFinal answer: \\(V_{out}/I_{in}\\approx -R_F\\) (TIA)",
        "format": "markdown",
        "sha256": "f581443ed6c1b5a8116728c445599e3590129a718cae0a45e63ab91070c13161"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage, and RF as output-to-input feedback forming a TIA. The negative-feedback sign, approximately −RF transimpedance, and reduced input impedance are also correct.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2140,
        "output_tokens": 4957,
        "total_tokens": 7097,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2140,
        "output_tokens": 4957,
        "total_tokens": 7097,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a shunt-shunt feedback transimpedance amplifier (TIA). \\(M_1\\) is a common-gate input stage (gate biased at \\(V_b\\)) that presents a low impedance to \\(I_\\text{in}\\). Its drain (node \\(X\\)) drives the common-source voltage-gain stage \\(M_2\\). Resistive feedback \\(R_F\\) is taken from \\(V_\\text{out}\\) back to the source of \\(M_1\\).\n\nBecause the loop gain is normally large, the closed-loop transimpedance is set by the feedback resistor:\n\\[\n\\frac{V_\\text{out}}{I_\\text{in}}\\approx -R_F.\n\\]\n(The polarity is inverting: a positive \\(I_\\text{in}\\) raises the source of \\(M_1\\), raises node \\(X\\), and therefore lowers \\(V_\\text{out}\\).) The same feedback also reduces the already-low input impedance of the common-gate stage and extends bandwidth.\n\n(The exact mid-band expression, including loading of \\(R_F\\) on both the input and output nodes, is readily obtained from KCL at the source of \\(M_1\\) and at \\(V_\\text{out}\\), but is seldom needed once the loop gain \\(g_{m1}R_{D1}g_{m2}R_{D2}\\) is known to be high.)",
        "format": "markdown",
        "sha256": "8e370f0d44c0f2ad35cff09f323ba75a3a2eb46690c4c6ef93741a26f9547f5b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from the output to the input node. It also gives the correct negative-feedback polarity and high-loop-gain transimpedance of approximately −RF.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2140,
        "output_tokens": 6868,
        "total_tokens": 9008,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2140,
        "output_tokens": 6868,
        "total_tokens": 9008,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a two-stage shunt-shunt feedback transimpedance amplifier (TIA). \\(M_1\\) (biased by \\(V_b\\)) forms a common-gate input stage loaded by \\(R_{D1}\\); \\(M_2\\) forms a common-source voltage-gain stage loaded by \\(R_{D2}\\). Resistor \\(R_F\\) closes a negative-feedback loop around the cascade.\n\nBecause the loop gain is normally large, the source node of \\(M_1\\) behaves as a virtual ground for signal currents. Consequently almost all of the input current flows through the feedback resistor and the closed-loop transimpedance is\n\\[\n\\frac{V_\\text{out}}{I_\\text{in}}\\approx -R_F.\n\\]\n(The same conclusion follows from a complete small-signal nodal analysis once terms of order \\(1/(g_mR)\\) are neglected.)\n\nThe topology simultaneously provides a low input impedance (further reduced by the loop gain) and a well-defined transimpedance set by a single resistor, which is the reason it is widely used as an optical or RF current-to-voltage converter.\n\nFinal answer: \\(V_\\text{out}/I_\\text{in}\\approx -R_F\\)",
        "format": "markdown",
        "sha256": "f8ec58c5b2bff1f06035d581234396020e04df53d798be32ba0837b89b6a0bc5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate input stage, common-source second stage, and negative-feedback TIA, and gives the high-loop-gain transimpedance Vout/Iin ≈ −RF. The virtual-ground description is a reasonable high-loop-gain approximation.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2140,
        "output_tokens": 7575,
        "total_tokens": 9715,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7313,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2140,
        "output_tokens": 7575,
        "total_tokens": 9715,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7313,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a current-to-voltage converter. Transistor \\(M_1\\) (biased at constant current \\(I_1\\) with fixed gate voltage \\(V_b\\)) holds node \\(V_x\\) at the nearly constant voltage\n\\[\nV_x \\approx V_b - V_{\\mathrm{GS}1}(I_1).\n\\]\nThis fixes the drain-source voltage of \\(M_2\\). KCL at \\(V_x\\) then forces the drain current of \\(M_2\\) to be the linear function of the input\n\\[\nI_{D2}=I_B-I_1-I_{\\mathrm{in}}\n\\]\n(\\(I_B\\) denotes the unlabeled DC current source). Consequently the output is the corresponding gate-source voltage of \\(M_2\\):\n\\[\nV_{\\mathrm{out}}=V_{DD}-|V_{\\mathrm{GS}2}(I_{D2})|.\n\\]\n(The same relation written with the square-law model is \\(V_{\\mathrm{out}}=V_{DD}-|V_{tp}|-\\sqrt{2I_{D2}/k_p}\\).)\n\nSmall-signal analysis about a bias point (infinite \\(r_o\\)) yields the transimpedance\n\\[\n\\frac{v_{\\mathrm{out}}}{i_{\\mathrm{in}}}=\\frac{1}{g_{m2}}\n\\]\nand an identical output resistance \\(R_{\\mathrm{out}}=1/g_{m2}\\). Finite output conductances add only second-order corrections because \\(V_{DS2}\\) is held constant by \\(M_1\\).\n\nFinal answer: \\(v_{out}/i_{in}=1/g_{m2}\\)",
        "format": "markdown",
        "sha256": "e4208cc591fdca4e9f6b6581a813bdb3a01c4782806392eab65338c47bbb2e78"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It reaches the correct ideal transimpedance and output-resistance results, and its KCL and PMOS relation capture the current-to-voltage behavior. But it does not clearly explain the common-gate M1–M2 feedback loop, instead attributing the nearly fixed input node to M1’s bias; this leaves the central mechanism and finite-output-resistance reasoning incomplete.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2048,
        "output_tokens": 9132,
        "total_tokens": 11180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8764,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2048,
        "output_tokens": 9132,
        "total_tokens": 11180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8764,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a shunt-shunt feedback transimpedance amplifier. \\(M_1\\) (NMOS, gate biased at constant \\(V_b\\)) operates as a common-gate stage whose bias current is fixed by \\(I_1\\). \\(M_2\\) (PMOS) samples the output voltage and returns a proportional current to the input node, closing a negative-feedback loop.\n\nWith channel-length modulation neglected, KCL at the output forces the AC current in \\(M_1\\) to zero whenever the output port is unloaded. Consequently the source of \\(M_1\\) (the input node) is a virtual ground and the closed-loop transimpedance is set exclusively by the feedback device:\n\\[\n\\frac{v_\\text{out}}{i_\\text{in}}=\\frac{1}{g_{m2}}.\n\\]\nThe same virtual-ground condition yields \\(R_\\text{in}=0\\). The output resistance (input current source open) is\n\\[\nR_\\text{out}=\\frac{1}{g_{m2}}.\n\\]\n\n(The unlabeled DC current source that sinks from the input node merely sets the quiescent current of \\(M_2\\) and does not appear in the small-signal results.)",
        "format": "markdown",
        "sha256": "5c308a286c049e6c67b83544740c629d2edcb9e857b4de7fbed551ded711fe86"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, with feedback to the input node. It gives the expected transimpedance and output resistance; Rin = 0 is a valid idealized limit when channel-length modulation is neglected.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2048,
        "output_tokens": 6913,
        "total_tokens": 8961,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2048,
        "output_tokens": 6913,
        "total_tokens": 8961,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit uses a flipped voltage follower (FVF) formed by \\(M_1\\) (NMOS) and \\(M_2\\) (PMOS). Gate bias \\(V_b\\) and drain current \\(I_1\\) of \\(M_1\\) fix the voltage at the FVF low-impedance node \\(V_x\\) (source of \\(M_1\\), drain of \\(M_2\\)):\n\n\\[\nV_x = V_b - V_{GS1}(I_1).\n\\]\n\nInput current \\(I_\\text{in}\\) is injected into this node. The unlabeled current sink at \\(V_x\\) sets the DC current in \\(M_2\\). Consequently \\(V_\\text{out}\\) (high-impedance node) is set by the \\(V_{SG}\\) of \\(M_2\\):\n\n\\[\nV_\\text{out}=V_{DD}-|V_{tp}|-\\sqrt{\\frac{2I_{D2}}{k_p'(W/L)_2}},\\qquad I_{D2}=I_\\text{sink}-I_1-I_\\text{in}.\n\\]\n\nSmall-signal transimpedance (infinite load, \\(\\lambda=0\\)) is therefore\n\n\\[\n\\frac{v_\\text{out}}{i_\\text{in}}\\approx\\frac{1}{g_{m2}}.\n\\]\n\nFinite \\(r_o\\) adds only a negligible correction of order \\(g_{ds1}g_{ds2}/g_{m1}\\). The same feedback that keeps \\(V_x\\) constant yields an extremely low input impedance\n\n\\[\nz_\\text{in}\\approx\\frac{1}{g_{m1}(g_{m2}r_{o1})}.\n\\]\n\n(The body effect of \\(M_1\\) simply replaces \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).) All devices remain in saturation provided \\(V_{DD}\\) is large enough to accommodate the two \\(V_{DS}\\) stacks plus the compliance of the current sources.\n\nFinal answer: \\(v_{out}/i_{in}\\approx1/g_{m2}\\)",
        "format": "markdown",
        "sha256": "dabf6952f7ae904a93a324f7269541bb52931c92c5b7dde3b2afa53d72cb3ea4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It identifies the NMOS input device and PMOS output-controlled feedback device, and gives the correct low input resistance and approximately 1/gm2 transimpedance. However, it calls the circuit an FVF and describes Vout as high impedance, contrary to the low output resistance of the feedback circuit; the feedback path is also not clearly traced.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2048,
        "output_tokens": 9532,
        "total_tokens": 11580,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9075,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2048,
        "output_tokens": 9532,
        "total_tokens": 11580,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9075,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage CMOS ring oscillator. Each inverter contributes a pole whose time constant is set by \\(C_L\\). The oscillation frequency therefore scales as \\(1/C_L\\), but the Barkhausen gain condition (inverter DC gain \\(>2\\)) is independent of \\(C_L\\). Consequently the loop remains unstable for any finite capacitance, however large, and a periodic waveform continues to exist (simply at a correspondingly low frequency).\nFinal answer: No",
        "format": "markdown",
        "sha256": "4455feaa063ff69e76f778e1678fa684278b66adac01f227bc0f64039f6a40c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency as capacitance increases, and supports this with the capacitance-independent Barkhausen gain condition.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2073,
        "output_tokens": 1653,
        "total_tokens": 3726,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2073,
        "output_tokens": 1653,
        "total_tokens": 3726,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a standard 3-stage CMOS ring oscillator. Each inverter can be modeled (near the trip point) as having a DC gain of \\(-A\\) and a single pole at \\(\\omega_p \\propto 1/C_L\\). The resulting loop transmission therefore satisfies the Barkhausen criterion at a frequency \\(\\omega_\\text{osc}=\\omega_p\\sqrt{3}\\) provided only that \\(A>2\\). Both the gain condition and the existence of a purely imaginary pair of closed-loop poles are independent of the value of \\(C_L\\). Consequently the circuit continues to oscillate (simply at a proportionally lower frequency) even when the three capacitors become arbitrarily large.\nFinal answer: no",
        "format": "markdown",
        "sha256": "bc30fae70885d068ff642db1b58bb5cea77e69da9189c3473c2a014db03a2086"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors slow the oscillation without stopping it, and supports this with the small-signal phase and gain argument. The A>2 wording is a minor simplification of the startup threshold and does not change the central result.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2073,
        "output_tokens": 2225,
        "total_tokens": 4298,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2073,
        "output_tokens": 2225,
        "total_tokens": 4298,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage CMOS ring oscillator. Each inverter has the small-signal transfer function \\(-A/(1+s\\tau)\\) with \\(A=g_mR_d>2\\) (typically) and \\(\\tau=R_dC_L\\). The loop transmission is therefore\n\\[\n\\Bigl(\\frac{-A}{1+s\\tau}\\Bigr)^3.\n\\]\nBarkhausen’s criterion is satisfied at the frequency \\(\\omega=\\sqrt{3}/\\tau\\) provided \\(A\\ge2\\). Both the required gain and the existence of a frequency that produces exactly \\(360^\\circ\\) of phase shift are independent of \\(C_L\\). Consequently the circuit continues to oscillate (at a frequency that simply scales as \\(1/C_L\\)) even as the three capacitors become arbitrarily large.\nFinal answer: No",
        "format": "markdown",
        "sha256": "91f4110545a280bd8d0d290cf9803d005328dcd763b216426169f5d226822a73"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal capacitive loading at all three nodes does not stop oscillation, and uses the small-signal phase condition to show the frequency scales inversely with capacitance while the gain condition is unchanged.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2073,
        "output_tokens": 2515,
        "total_tokens": 4588,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2337,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2073,
        "output_tokens": 2515,
        "total_tokens": 4588,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2337,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage CMOS ring oscillator. Doubling all load capacitors \\(C_L\\) leaves the inverter transistor sizes (hence \\(I\\) and \\(g_m\\)) unchanged. Consequently:\n\n- Every stage delay scales as \\(t_d\\propto C_L\\), so the oscillation frequency halves.\n- Dynamic power \\(P=N f_{\\rm osc}C_L V_{DD}^2\\) remains constant.\n- The maximum charge displacement per stage \\(q_{\\rm max}=C_L V_{\\rm swing}\\) doubles.\n\nThe impulse-sensitivity function (normalized to the oscillation period) is unchanged because the waveform shape versus phase is identical. Hajimiri’s expression therefore predicts that the \\(1/f^2\\) phase noise at a given absolute offset \\(\\Delta\\omega\\) scales as\n\\[\n\\mathcal{L}\\{\\Delta\\omega\\}\\propto\\frac{1}{q_{\\rm max}^2}\\propto\\frac{1}{C_L^2}.\n\\]\nDoubling \\(C_L\\) reduces \\(\\mathcal{L}\\) by a factor of 4 (6 dB). The same 6 dB improvement follows from Leeson’s formula (constant power and tank \\(Q\\), \\(\\omega_0\\) halved) and from a first-order jitter analysis (\\(\\sigma_T\\propto\\sqrt{C_L}\\), \\(S_{\\phi}\\propto\\sigma_T^2 f_{\\rm osc}^3\\)).\n\nFinal answer: decreases 6 dB",
        "format": "markdown",
        "sha256": "1f6aedb9652eeb2ee705f62f2ccf4b4bff6d1c65b6e60a454388fcf4e37f79dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling the capacitors halves the oscillation frequency and reduces phase noise by a factor of four (6 dB) at a fixed offset. The extra modeling comments do not change the essential result.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2071,
        "output_tokens": 5652,
        "total_tokens": 7723,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5345,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2071,
        "output_tokens": 5652,
        "total_tokens": 7723,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5345,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage CMOS ring oscillator. Doubling all load capacitors \\(C_L\\) halves the oscillation frequency \\(f_0\\) (each inverter delay doubles) while leaving the dissipated power \\(P \\propto N C_L V_{DD}^2 f_0\\) unchanged.\n\nThe white-noise phase noise of a ring oscillator obeys\n\\[\n\\mathcal{L}(\\Delta\\omega)\\propto\\frac{kT}{P}\\Bigl(\\frac{\\omega_0}{\\Delta\\omega}\\Bigr)^2.\n\\]\nWith \\(P\\) fixed and \\(\\omega_0\\) halved, \\(\\mathcal{L}\\) therefore falls by a factor of 4 (6 dB) at any given offset.\n\n(The same 6 dB improvement follows from a first-order jitter analysis: period jitter scales as \\(\\sqrt{C_L}\\) while the period itself scales as \\(C_L\\), again producing a net factor-of-4 reduction in \\(\\mathcal{L}(\\Delta\\omega)\\).)\n\nFinal answer: decreases 6 dB (factor of 4)",
        "format": "markdown",
        "sha256": "06640aedf16200a7db037229e8714f5cda8c00936e985ea53b5be06c5dbd0a2d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and lowers phase noise by a factor of four (6 dB) at a fixed offset, as required.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2071,
        "output_tokens": 4547,
        "total_tokens": 6618,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4324,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2071,
        "output_tokens": 4547,
        "total_tokens": 6618,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4324,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage CMOS ring oscillator. Doubling all three load capacitors halves \\(f_0\\) while leaving the dissipated power \\(P\\) unchanged (each node still dissipates \\(CV_{DD}^2\\) per cycle). The effective quality factor of a ring oscillator is independent of this scaling, so Leeson's formula immediately shows that \\(\\mathcal{L}(\\Delta\\omega)\\) falls by \\(6\\,\\mathrm{dB}\\) at any given offset.\n\n(The same conclusion follows from the Hajimiri impulse-sensitivity analysis: \\(q_\\mathrm{max}\\) doubles while \\(\\Gamma_\\mathrm{rms}\\) and the device noise currents remain unchanged, again reducing \\(\\mathcal{L}(\\Delta\\omega)\\) by a factor of four.)\n\nFinal answer: decreases 6 dB (at given \\(\\Delta\\omega\\))",
        "format": "markdown",
        "sha256": "d87b85904897d4c057a7d05c20ab1f99bc9669f774ced2b94212e06a4990fd02"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and lowers phase noise by 6 dB (a factor of four) at a fixed offset, with supporting reasoning.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2071,
        "output_tokens": 2904,
        "total_tokens": 4975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2735,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2071,
        "output_tokens": 2904,
        "total_tokens": 4975,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2735,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator. Linearizing around the DC bias point (all nodes at the inverter trip voltage) yields the characteristic equation\n\\[\n(1+s\\tau_1)(1+s\\tau_2)(1+s\\tau_3)+A^3=0,\n\\]\nwhere \\(A=g_m r_o\\) is the DC gain of each inverter and the \\(\\tau_i\\) are the time constants at the three nodes. When \\(C_L\\) (hence \\(\\tau_3\\)) becomes arbitrarily large the Routh-Hurwitz criterion is satisfied and every root lies in the left half-plane. Consequently the bias point is stable and oscillation cannot start.\n(The same conclusion follows from a large-signal argument: the two unloaded inverters become instantaneous, converting the loop into a single inverter with its output tied to its input. That connection is purely negative feedback and simply settles at the trip point.)\nFinal answer: yes",
        "format": "markdown",
        "sha256": "a6a12e781ebcafc8063d665c7a734581f9dab829da7d79d8c335f17a73e3f058"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large loading stabilizes the bias point and prevents oscillation. The Routh-Hurwitz analysis and quasi-static negative-feedback explanation capture the dominant slow-node mechanism described in the golden solution.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1952,
        "output_tokens": 6557,
        "total_tokens": 8509,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6355,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1952,
        "output_tokens": 6557,
        "total_tokens": 8509,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6355,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator whose only explicit capacitance is \\(C_L\\). Each inverter contributes a DC inversion (180°). Oscillation around the unique DC bias point (all nodes at the switching threshold \\(V_M\\)) therefore requires the three poles to contribute an additional 180° of phase lag at a frequency where the loop gain still has magnitude 1.\nWhen \\(C_L\\) is made arbitrarily large the poles become widely separated. The frequency at which the extra phase lag reaches 180° then lies far above the unity-gain frequency of the loop, so the Barkhausen criterion cannot be satisfied. Equivalently, the linearized closed-loop characteristic equation has all of its roots in the left half-plane; the bias point is stable.\nBecause the small-signal loop gain is already insufficient, large-signal (describing-function) gain, which is even smaller, cannot sustain a limit cycle either. Consequently the circuit simply settles to \\(V_M\\) and does not oscillate.\nFinal answer: yes",
        "format": "markdown",
        "sha256": "bf528cc48ddf21451a1c276b9b95e607444e4a6f0e0bacbc84f81e5947d9453f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that oscillation fails for arbitrarily large CL and explains that the separated pole behavior makes the required phase condition occur where loop gain is insufficient. This captures the dominant-pole/Barkhausen mechanism.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1952,
        "output_tokens": 8897,
        "total_tokens": 10849,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8683,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1952,
        "output_tokens": 8897,
        "total_tokens": 10849,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8683,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of three inverters connected in a ring (odd number of inversions), which produces negative feedback around the unique DC equilibrium point at which all nodes sit at the inverter threshold. Each inverter contributes a pole. When the three time constants are comparable, the excess phase lag around the loop renders this equilibrium unstable for typical inverter gains, producing oscillation.\n\nA load \\(C_L\\) that is arbitrarily large makes one pole dominant. The remaining two poles then lie at far higher frequencies, so the loop behaves as a single-pole negative-feedback system. Routh-Hurwitz analysis of the resulting cubic characteristic equation confirms that all roots lie in the open left-half plane once \\(C_L\\) exceeds a finite threshold set by the inverter gain and the parasitic capacitances. Consequently the DC equilibrium is stable and the circuit does not oscillate.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "65af378fd41fc1d9df7f58d942d1eb738ef6462e592cd06cb11c52a28d21ddce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large loading on one node creates a dominant pole and stabilizes the DC equilibrium, so oscillation fails. The added threshold discussion does not contradict the essential explanation.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1952,
        "output_tokens": 5845,
        "total_tokens": 7797,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5670,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1952,
        "output_tokens": 5845,
        "total_tokens": 7797,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5670,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage CMOS ring oscillator. Doubling all device widths leaves the oscillation frequency unchanged (both the drive current and the load capacitance of each inverter scale by the same factor). The resulting \\(2\\times\\) increase in \\(C\\) reduces the \\(kT/C\\) voltage noise power by \\(2\\times\\). Because the voltage swing is unaltered, the conversion of this noise into phase perturbations is likewise reduced by \\(2\\times\\), i.e., the phase-noise sidebands fall by 3 dB.\n\nFinal answer: -3 dB",
        "format": "markdown",
        "sha256": "f69bcd7d94d8a3185e4ea8f862e070c20408067834270c22a7313d09e1b64cc5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB phase-noise reduction and uses the valid node-capacitance argument: doubled capacitance halves the node noise voltage power while the signal swing remains unchanged.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2688,
        "output_tokens": 1847,
        "total_tokens": 4535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1730,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2688,
        "output_tokens": 1847,
        "total_tokens": 4535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1730,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage CMOS ring oscillator. Doubling all device widths leaves the oscillation frequency unchanged: both the drive current of each inverter and the load capacitance that it must charge/discharge scale by the same factor, so the delay per stage (and therefore \\(f_0\\)) is invariant. Rail-to-rail swing is likewise unchanged.\n\nThermal (and flicker) drain-noise current spectral densities both scale linearly with width and therefore with \\(C\\). The resulting voltage perturbation on each capacitor is \\(\\Delta V=i_n\\Delta t/C\\), which therefore falls as \\(1/\\sqrt{C}\\). Because the ISF (or, equivalently, the slew rate \\(I/C\\)) is independent of the scaling, the induced phase perturbation also falls as \\(1/\\sqrt{C}\\). Consequently the phase-noise sideband power, being proportional to \\(\\overline{\\Delta\\phi^2}\\), is reduced by 3 dB.\n\n(The same 3 dB improvement follows at once from the fact that dissipated power doubles while \\(f_0\\) and \\(Q\\) of a ring remain constant.)\n\nFinal answer: -3 dB (improves)",
        "format": "markdown",
        "sha256": "552f84f0971f53253ac48e7dad7a1fcdb8b7ce018e007a48875399d4c7ab3d0f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts about a 3 dB phase-noise reduction. Its scaling argument is consistent: noise-current power doubles while node capacitance doubles, reducing node-voltage and phase perturbation power by a factor of two.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2688,
        "output_tokens": 2652,
        "total_tokens": 5340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2409,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2688,
        "output_tokens": 2652,
        "total_tokens": 5340,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2409,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage CMOS ring oscillator. Doubling all device widths leaves the oscillation frequency unchanged (both the drive current and the load capacitance of every inverter double, so the per-stage delay is invariant). The charge swing \\(q_{\\max}\\) therefore also doubles.\n\nThermal (and flicker) noise current PSDs likewise double. In the Hajimiri impulse-sensitivity framework the resulting phase-noise spectral density therefore scales as\n\\[\n\\mathcal{L}\\{\\Delta\\omega\\}\\propto\\frac{\\overline{i_n^2}/\\Delta f}{q_{\\max}^2}\\propto\\frac{2}{4}=\\frac12.\n\\]\nHence the phase noise improves by 3 dB. (The same conclusion follows from the observation that dissipated power doubles while the oscillator figure-of-merit remains constant.)\n\nFinal answer: decreases 3 dB",
        "format": "markdown",
        "sha256": "ed46bf43466cc898296063b92bb1b47019204f133acecb8647dde525132818e8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states a 3 dB phase-noise reduction and supports it with the valid scaling argument: noise current PSD doubles while signal charge squared quadruples.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2688,
        "output_tokens": 1841,
        "total_tokens": 4529,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2688,
        "output_tokens": 1841,
        "total_tokens": 4529,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The three CMOS inverters are biased at the metastable point (all internal nodes at \\(V_{DD}/2\\)). A small-signal voltage \\(v_x\\) applied to the common supply node therefore causes every internal node voltage to move by \\(v_x/2\\). Consequently the source-to-gate voltage of each PMOS transistor changes by only \\(v_x/2\\), producing a supply-current increment of \\(g_m v_x/2\\) per inverter.\n\nThe three identical contributions add, yielding a total current\n\\[\ni_x=\\frac{3}{2}g_m v_x.\n\\]\nThe resistance seen at the supply node is therefore\n\\[\nR_x=\\frac{v_x}{i_x}=\\frac{2}{3g_m}.\n\\]\n(The same result is obtained when finite \\(r_o\\) is retained; the \\(r_o\\) terms cancel identically and the expression remains \\(2/[3(g_m+1/r_o)]\\approx 2/(3g_m)\\).)\n\nFinal answer: \\(\\dfrac{2}{3g_m}\\)",
        "format": "markdown",
        "sha256": "da75b393ca94ecf86c6a64935e27edcb6b72a8150e9993e52585e6c8e6b0dc90"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance and ignores the oscillation-driven charging and discharging of the load capacitances, which is the dominant mechanism. The golden solution explicitly assigns this type of answer a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2684,
        "output_tokens": 7057,
        "total_tokens": 9741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6812,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2684,
        "output_tokens": 7057,
        "total_tokens": 9741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6812,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The three CMOS inverters are biased at the unique DC equilibrium point of the ring (all internal nodes equal to the switching threshold \\(V_M \\approx V_{DD}/2\\)). Complementary devices are assumed matched, so \\(g_{mn}=g_{mp}=g_m\\) (channel-length modulation neglected).\n\nAt this bias point each inverter carries the same current\n\\[\nI=\\frac{k}{2}\\Bigl(\\frac{V_{DD}}{2}-V_t\\Bigr)^2.\n\\]\nDifferentiating with respect to the supply yields the incremental current of one stage\n\\[\n\\frac{dI}{dV_{DD}}=\\frac{g_m}{2}.\n\\]\nThe three stages therefore produce a total supply current whose small-signal conductance is \\(3g_m/2\\). The resistance seen looking into the common supply node is consequently\n\\[\nR_x=\\frac{2}{3g_m}.\n\\]\n(The same result is obtained by writing KCL on the linearized circuit, imposing the ring connections, and evaluating \\(v_{dd}/i_{total}\\).)\n\nFinal answer: \\(\\dfrac{2}{3g_m}\\)",
        "format": "markdown",
        "sha256": "b5c464db33944157aaefe80eb1e1a3609547ef74661ce0c640a9aa17108eccff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer analyzes only the static DC equilibrium and gives a gm-based resistance, missing the dominant supply current from oscillation-driven charging and discharging of the three load capacitances. The golden solution specifies score 1 for this static-only result.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2684,
        "output_tokens": 12276,
        "total_tokens": 14960,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12024,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2684,
        "output_tokens": 12276,
        "total_tokens": 14960,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12024,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The three-stage ring oscillator has a unique DC operating point at which every internal node sits at the inverter threshold \\(V_\\mathrm{DD}/2\\). Linearizing about this point (with matched NMOS and PMOS devices so that \\(g_{mn}=g_{mp}=g_m\\) and neglecting channel-length modulation) yields the source-to-gate and source-to-drain voltages of every PMOS equal to \\(v_x/2\\). Consequently each inverter draws a supply current\n\\[\ni=g_m\\cdot\\frac{v_x}{2}.\n\\]\nThe three inverters appear in parallel at the supply node, producing the small-signal resistance\n\\[\nR_x=\\frac{2}{3g_m}.\n\\]\n\nFinal answer: \\(2/(3g_m)\\)",
        "format": "markdown",
        "sha256": "1a8614c351216649ec360593b43a7d2460af67d922c22098c8f2e70417d603b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance and ignores the oscillation-driven charging and discharging of the load capacitances, which set the supply-node resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2684,
        "output_tokens": 6953,
        "total_tokens": 9637,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6779,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2684,
        "output_tokens": 6953,
        "total_tokens": 9637,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6779,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given expression for \\(R_X\\) follows from linearizing each inverter about the (unstable) DC equilibrium at which \\(V_\\text{in}=V_\\text{out}\\) for every stage. At that point the three internal nodes are identical by symmetry, each MOSFET is diode-connected, and the three complementary pairs appear in parallel.\n\nOnce the circuit oscillates the internal voltages become large, periodic, and 120° apart. The MOSFETs therefore traverse cutoff, saturation and triode, the instantaneous conductance looking into the common supply is time-varying, and the average (or describing-function) resistance is no longer \\((1/3)(1/g_{mn}+1/g_{mp})\\) evaluated at the trip point. Consequently the expression changes.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "189ae23f0f51d6fc4aedd65bea5c9cd3ef0330117b57be0772296144b3cf32ab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that the static small-signal expression no longer directly applies during oscillation, but misses the key capacitive charging mechanism and the conclusion that the resulting resistance remains on the order of the MOS on-resistance rather than becoming much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2767,
        "output_tokens": 5311,
        "total_tokens": 8078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5149,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2767,
        "output_tokens": 5311,
        "total_tokens": 8078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5149,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given expression for \\(R_X\\) is the linearized (small-signal) resistance obtained at the DC equilibrium point where every internal node sits at the inverter threshold (\\(\\approx V_{DD}/2\\)). At that point every inverter is equivalent to a series pair of diode-connected devices, the three stages appear in parallel, and\n\\[\nR_X=\\frac13\\Bigl(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\Bigr).\n\\]\n(The same result is obtained from a full small-signal KCL analysis of the loop; all three internal voltages simply move together.)\n\nWhen the circuit is allowed to oscillate the internal waveforms become large, nearly rail-to-rail, and delayed by \\(120^\\circ\\). The transistors therefore spend most of each period in cutoff or triode, not in saturation at \\(V_{DD}/2\\). Consequently the DC \\(I_{DD}(V_{DD})\\) characteristic (and its slope \\(1/R_X\\)) is completely different from the equilibrium-point calculation above. The original expression no longer holds.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "5089d74a8f0de4c743c87a5298739473583788650a99e16f5f71363dfd23931f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It says oscillation invalidates the static result but gives no capacitive charging argument or estimate of the oscillating resistance. The key conclusion that the resistance remains on the order of the MOS on-resistance is missing.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2767,
        "output_tokens": 5027,
        "total_tokens": 7794,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4795,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2767,
        "output_tokens": 5027,
        "total_tokens": 7794,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4795,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given expression for \\(R_X\\) holds only at the (unstable) DC bias point of the ring, where \\(V_\\text{in}=V_\\text{out}\\) for every stage. At that unique point each MOSFET is diode-connected, so the three inverters appear as three parallel connections of \\(1/g_{mn}+1/g_{mp}\\).\n\nOnce the circuit oscillates the internal voltages execute large-signal, out-of-phase swings. The transistors therefore spend most of the period in regions other than the diode-connected bias point, the average supply current is set by the large-signal charging of the load capacitances, and the incremental resistance seen at the common supply node is no longer \\((1/3)(1/g_{mn}+1/g_{mp})\\).\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "c4d573b5e21f951d1342f0a51e55f0b277ea9a9ca9546066c8b76ea5141a328d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies capacitive charging as the dynamic supply-current mechanism, but does not give the resulting resistance relation or establish that its magnitude remains on the order of the MOS on-resistance. Its unqualified conclusion that the answer changes misses the key result.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2767,
        "output_tokens": 3620,
        "total_tokens": 6387,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3447,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2767,
        "output_tokens": 3620,
        "total_tokens": 6387,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3447,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch (dynamic comparator). When CK goes high, M7 turns on and the input pair M1/M2 begins discharging the parasitic capacitances at nodes P and Q. Regeneration (via the cross-coupled devices) cannot begin until those nodes have fallen by approximately \\(V_{\\mathrm{th}}\\). The differential voltage that therefore appears at P/Q at the onset of regeneration is\n\\[\n\\Delta V_{PQ}\\approx\\frac{g_m}{I_{\\mathrm{tail}}}V_{\\mathrm{th}}\\cdot\\Delta V_{\\mathrm{in}}.\n\\]\nThe factor \\(g_m/I_{\\mathrm{tail}}\\) is inversely proportional to the overdrive of M1/M2. Increasing \\(W_{M7}\\) raises \\(I_{\\mathrm{tail}}\\) and therefore raises that overdrive, which reduces the initial voltage gain.\n\nFinal answer: decreases",
        "format": "markdown",
        "sha256": "ac1404a1027837ca5fb4b00b7b48d2e0181ac74a96f3e086dace49861f93b3be"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the initial gain decreases as wider M7 increases tail current, and gives a physically consistent explanation via the reduced gm/Itail (gm/ID) gain factor.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2709,
        "output_tokens": 3429,
        "total_tokens": 6138,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3247,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2709,
        "output_tokens": 3429,
        "total_tokens": 6138,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3247,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch (dynamic comparator). In the evaluation phase (CK high), M7 enables a discharge current \\(I\\) through the input pair M1/M2. This current integrates on the parasitic capacitances at the intermediate nodes, producing a differential voltage that is subsequently amplified by M3/M4 before regeneration begins.\n\nThe integration interval itself is set by the time required for the common-mode voltage at those nodes to fall by a threshold; that interval therefore scales as \\(1/I\\). Because \\(g_m/I\\) of M1/M2 also falls as \\(I\\) (and therefore \\(V_\\mathrm{ov}\\)) rises, the net voltage gain realized before regeneration, \\(\\propto(g_m/I)\\), decreases. Enlarging \\(W_{M7}\\) increases \\(I\\), so the initial voltage gain drops.\n\nFinal answer: decreases",
        "format": "markdown",
        "sha256": "7b8f4ba6b74e8b66a1c2938e4d9f7cb12bd070d29dcf1d1e87cc11905409d5cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain decreases and explains that a wider M7 increases tail current, reducing the input pair’s relevant gm/I factor.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2709,
        "output_tokens": 4185,
        "total_tokens": 6894,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4002,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2709,
        "output_tokens": 4185,
        "total_tokens": 6894,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4002,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch comparator. In the evaluation phase (CK high), M7 enables a tail current \\(I\\) that discharges the intermediate nodes \\(P\\) and \\(Q\\) through the input pair \\(M_1,M_2\\). A differential voltage \\(\\Delta V_{PQ}\\) therefore integrates according to\n\\[\n\\Delta V_{PQ}\\propto\\frac{g_m}{C}t_{\\text{int}}V_{\\text{in}},\n\\]\nwhere the integration window \\(t_{\\text{int}}\\) is the time required for the common-mode voltage of \\(P,Q\\) to fall by one \\(V_{\\text{TH}}\\) (the instant at which the regenerative latch \\(M_3{-}M_6\\) turns on).\n\nBecause \\(t_{\\text{int}}\\propto C/I\\) while \\(g_m\\propto\\sqrt{I}\\), the resulting voltage gain scales as\n\\[\nA_v=\\frac{\\Delta V_{PQ}}{V_{\\text{in}}}\\propto\\frac{1}{\\sqrt{I}}.\n\\]\nIncreasing \\(W_{M7}\\) raises \\(I\\) and therefore reduces \\(A_v\\).\n\nFinal answer: decreases",
        "format": "markdown",
        "sha256": "dad51c097e4b9928e02e1709c3b0557d911ecaec49e04a65c41af4fbaa8e46e7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that increasing M7 width raises the tail current and decreases the initial gain; the integration-time and transconductance scaling give a physically consistent explanation.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2709,
        "output_tokens": 2905,
        "total_tokens": 5614,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2657,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2709,
        "output_tokens": 2905,
        "total_tokens": 5614,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2657,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch. Its evaluation interval consists of several successive phases, the first of which lasts from the rising edge of \\(CK\\) until the intermediate nodes \\(P\\) and \\(Q\\) have fallen by \\(V_{\\rm thn}\\). In that interval the input pair simply integrates onto \\(C_P\\) and \\(C_Q\\):\n\n\\[\n\\Delta V_{PQ}=\\frac{g_{m1,2}\\Delta V_{\\rm in}}{C_{P,Q}}t,\\qquad t=\\frac{C_{P,Q}V_{\\rm thn}}{I_D}.\n\\]\n\nThe product is therefore independent of the intermediate-node capacitance:\n\n\\[\nA_{v,{\\rm init}}=\\frac{g_{m1,2}V_{\\rm thn}}{I_D}.\n\\]\n\nRaising \\(C_P\\) and \\(C_Q\\) lengthens the integration window by exactly the same factor that it reduces the slope \\(\\mathrm{d}V_{PQ}/\\mathrm{d}t\\), leaving the voltage gain of the first phase unchanged.\n\nFinal answer: remains unchanged",
        "format": "markdown",
        "sha256": "ddc2e32488959a19fb4ea4fc5d1826eea7371210b367df5261f1806d444ca995"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes the initial gain is unchanged and explains that the longer integration interval with larger capacitance cancels its reduced voltage slope.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2708,
        "output_tokens": 13238,
        "total_tokens": 15946,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13004,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2708,
        "output_tokens": 13238,
        "total_tokens": 15946,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13004,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch. Immediately after the clock edge, \\(M_1\\)-\\(M_2\\) integrate the input difference onto the capacitances at \\(P\\) and \\(Q\\) while \\(M_3\\)-\\(M_4\\) remain off. This interval ends when the common-mode voltage at \\(P,Q\\) has fallen by \\(V_{\\mathrm{TH}}\\), at which point\n\\[\n\\Delta V_{PQ}=\\frac{g_{m1,2}}{I_{D1,2}}V_{\\mathrm{TH}}\\cdot\\Delta V_{\\mathrm{in}}.\n\\]\nThe capacitance therefore cancels and the voltage gain realized in the first (initial) phase is independent of \\(C_P\\) and \\(C_Q\\).\n\nFinal answer: remains unchanged",
        "format": "markdown",
        "sha256": "47bc3c2b4fc4fd55ad8481c649ab1117b93d64fa120e997f1ae14deeaf68f660"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is independent of the node capacitances and explains that capacitance cancels over the amplification interval.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2708,
        "output_tokens": 6019,
        "total_tokens": 8727,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5854,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2708,
        "output_tokens": 6019,
        "total_tokens": 8727,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5854,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch comparator. Immediately after the clock edge, \\(M_3/M_4\\) remain off and the only action is integration of the differential pair current onto the parasitic capacitances at the intermediate nodes \\(P\\) and \\(Q\\). The duration of this interval is the time required for the common-mode voltage at \\(P,Q\\) to fall by \\(V_{\\rm THN}\\):\n\n\\[\nt_1=C_{P,Q}\\frac{V_{\\rm THN}}{I_D}.\n\\]\n\nThe differential voltage that therefore appears at \\(P,Q\\) is\n\n\\[\n\\Delta V_{PQ}=\\frac{g_{m1,2}}{C_{P,Q}}\\Delta V_{\\rm in}\\,t_1=\\frac{g_{m1,2}}{I_D}V_{\\rm THN}\\Delta V_{\\rm in}.\n\\]\n\nThe resulting voltage gain of the first (initial) phase is independent of \\(C_{P,Q}\\). Increasing those capacitances lengthens \\(t_1\\) by exactly the same factor that it reduces the slope \\(\\mathrm{d}(\\Delta V_{PQ})/\\mathrm{d}t\\), leaving the gain unchanged.\n\nFinal answer: remains unchanged",
        "format": "markdown",
        "sha256": "6d346097043467e257cdde81507e75264fc20a1b5c74ae7907a3ab4b0b1cdfca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is unchanged and explains that the longer integration interval from increased capacitance cancels the reduced differential-voltage slope.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2708,
        "output_tokens": 5349,
        "total_tokens": 8057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5086,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2708,
        "output_tokens": 5349,
        "total_tokens": 8057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5086,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch (clocked regenerative comparator). Transistors \\(M_5\\) and \\(M_6\\) form the PMOS half of the cross-coupled regenerative pair attached to the output nodes \\(X\\) and \\(Y\\).\n\nThe regeneration time constant is set by\n\\[\n\\tau_\\text{reg}=\\frac{C_{X,Y}}{g_{mN}+g_{mP}}.\n\\]\nWidening \\(M_5/M_6\\) directly raises \\(g_{mP}\\). Although the same transistors also contribute additional parasitic capacitance, the net result (especially in the presence of the fixed load presented by \\(M_3/M_4\\), the precharge devices and the subsequent logic) is a smaller \\(\\tau_\\text{reg}\\). Consequently the exponential growth of the differential output voltage is accelerated and the clock-to-output delay decreases.\n\nFinal answer: improve",
        "format": "markdown",
        "sha256": "8e9654690dbeebcb1147424c49e0e2eef96ea4cccc0b5724699f58fb4850a349"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening M5/M6 initially improves speed by strengthening regeneration, and recognizes added parasitic capacitance. It omits that this benefit eventually diminishes and can reverse beyond an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2708,
        "output_tokens": 8690,
        "total_tokens": 11398,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8501,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2708,
        "output_tokens": 8690,
        "total_tokens": 11398,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8501,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch (clocked regenerative comparator). Nodes \\(X\\) and \\(Y\\) are precharged to \\(V_{DD}\\) while \\(CK\\) is low. When \\(CK\\) rises the input pair begins discharging the intermediate nodes \\(P\\) and \\(Q\\); the cross-coupled NMOS pair \\(M_3/M_4\\) then discharges \\(X\\) and \\(Y\\). Only after one of those nodes has fallen by \\(|V_{tp}|\\) do the PMOS devices \\(M_5/M_6\\) turn on and participate in regeneration.\n\nConsequently \\(M_5\\) and \\(M_6\\) contribute load capacitance at the critical output nodes from the very beginning of evaluation, yet they contribute transconductance only in the later regeneration phase. Enlarging them therefore lengthens the initial slew interval \\(t_0 \\propto C_{X,Y}|V_{tp}|/I\\) and increases the regeneration time constant more than the added \\(g_{mp}\\) can compensate. Net comparator delay increases.\n\nFinal answer: degrades",
        "format": "markdown",
        "sha256": "cbbf81a004015a508853cab34f45b29605768ae789e0c751dd878e87704db6ec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the added-capacitance versus regenerative-strength tradeoff, but wrongly concludes capacitance dominates from the outset. The golden solution says stronger regeneration initially improves speed, with capacitance limiting the benefit only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2708,
        "output_tokens": 9436,
        "total_tokens": 12144,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9217,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2708,
        "output_tokens": 9436,
        "total_tokens": 12144,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9217,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch (dynamic comparator). Nodes \\(X\\) and \\(Y\\) are precharged to \\(V_{DD}\\) while \\(CK\\) is low. On the rising edge of \\(CK\\), the input pair \\(M_1/M_2\\) produces a differential current that is steered into the regenerative pair \\(M_3/M_4\\). The resulting imbalance is then amplified by positive feedback.\n\\(M_5\\) and \\(M_6\\) remain off until the common-mode voltage at \\(X/Y\\) has already fallen by \\(|V_{TP}|\\). Consequently they contribute no transconductance during the critical initial regeneration interval; they only add drain and gate capacitance to the regenerative nodes. The increased \\(C_{X,Y}\\) simultaneously\n- slows the discharge of \\(X\\) and \\(Y\\), delaying the instant at which regeneration begins, and\n- increases the regeneration time constant \\(\\tau=C/g_m\\) while \\(g_m\\) is still supplied solely by \\(M_3/M_4\\).\nBoth effects lengthen the clock-to-output delay. (The PMOS devices do help restore a full logic-1 later, but that restoration occurs after the decision has already been made.)\nThus increasing the widths of \\(M_5\\) and \\(M_6\\) degrades speed.\nFinal answer: degrades",
        "format": "markdown",
        "sha256": "e2137f7c80ba45deae8ec163cc601bcd38f544cc6323e455b69a42ec26446ce5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion: widening M5/M6 initially speeds regeneration by strengthening their pull-up action. It identifies added capacitance as a real eventual limitation, but incorrectly treats it as dominant from the outset.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2708,
        "output_tokens": 6016,
        "total_tokens": 8724,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5731,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2708,
        "output_tokens": 6016,
        "total_tokens": 8724,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5731,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two C^{2}MOS stages in a loop with a static inverter. The clocked transistors therefore appear in series with the logic transistors and contribute diffusion capacitance directly at the dynamic nodes \\(X\\) and \\(Y\\).\n\nWidening those devices reduces their on-resistance but simultaneously increases both the output capacitance and the internal-node capacitance of each stack. Elmore delay of a two-transistor stack then contains a term that grows linearly with clocked width. For the device sizes and diffusion-to-gate capacitance ratios typical of the topology, the net delay therefore increases.\n\nHence the propagation delays of the stages lengthen and the maximum operating speed of the circuit degrades.\n\nFinal answer: degrade",
        "format": "markdown",
        "sha256": "1103cee1949f068b165d5dd386364d2d371ad2f07d0bb8b13083b14e477a49df"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies that widening lowers on-resistance but adds capacitance at the latch nodes. However, it concludes speed degrades, whereas widening improves speed initially before the capacitance penalty limits or reverses the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1963,
        "output_tokens": 14704,
        "total_tokens": 16667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1963,
        "output_tokens": 14704,
        "total_tokens": 16667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14561,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a pair of C2MOS stages (transparent on opposite clock phases) closed around a static inverter, forming an edge-triggered toggle flip-flop. The four clocked devices therefore lie directly in the pull-up and pull-down paths that charge and discharge the dynamic nodes \\(X\\) and \\(Y\\).\n\nWidening those devices lowers their on-resistance. Because the resistance appears in series with the logic transistors, the net resistance of every charging/discharging path decreases. The resulting reduction in RC time constants of \\(X\\) and \\(Y\\) shortens both the clk-to-Q delay of the slave stage and the setup time of the master stage, raising the maximum clock frequency at which the divider still functions correctly.\n\n(The accompanying increase in diffusion capacitance is second-order for the device sizes normally used in C2MOS and does not reverse the improvement.)\n\nFinal answer: improve",
        "format": "markdown",
        "sha256": "1d87deac2b4fd798af9c590722d7b947ebd985dc2ae50d4ec72dac8131e8a126"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that widening the clocked devices lowers series on-resistance and initially improves speed. However, it incorrectly dismisses the added capacitance as unable to reverse the benefit, missing the eventual limit or optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1963,
        "output_tokens": 9427,
        "total_tokens": 11390,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9242,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1963,
        "output_tokens": 9427,
        "total_tokens": 11390,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9242,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two C^{2}MOS stages (clocked inverters) connected in a loop with a static inverter. Each C^{2}MOS stage therefore contains a pair of series transistors in both the pull-up and pull-down paths. Widening the clocked devices reduces their on-resistance and therefore reduces the equivalent resistance of every stacked path. The resulting decrease in RC time constants at nodes \\(X\\) and \\(Y\\) shortens both the evaluation delay of each stage and the clk-to-Q delay of the overall sequential element, so the circuit becomes faster.\n\nFinal answer: improve",
        "format": "markdown",
        "sha256": "d17c265e375eb5a45a10f68bcd6c00724972ef3188913a8bc582e19d6401b4b6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors initially improves speed by reducing their on-resistance, but omits the added-capacitance penalty that can limit or reverse the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1963,
        "output_tokens": 5946,
        "total_tokens": 7909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5823,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1963,
        "output_tokens": 5946,
        "total_tokens": 7909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5823,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two C\\(^{2}\\)MOS stages in a feedback loop (with a static inversion), forming a divide-by-2 toggle flip-flop. The first stage is transparent on \\(\\mathrm{CK}=1\\) and the second stage is transparent on \\(\\mathrm{CK}=0\\). Consequently node \\(X\\) toggles exclusively on rising edges of \\(\\mathrm{CK}\\) while node \\(Y\\) toggles exclusively on falling edges of \\(\\mathrm{CK}\\). Both nodes therefore produce 50% duty-cycle square waves at \\(f_{\\mathrm{CK}}/2\\) whose transitions are separated by \\(T_{\\mathrm{CK}}/2\\), i.e., a 90° (quadrature) phase relationship.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "0df2c44c92eeb1da602346937ad52fefec3686d9d9c83ab3f3962955530508d7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature relationship, but omits both reasons the outputs are not exactly in quadrature: Inv3 delay and unequal loading of the latch outputs.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1948,
        "output_tokens": 4277,
        "total_tokens": 6225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4122,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1948,
        "output_tokens": 4277,
        "total_tokens": 6225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4122,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two C\\(^2\\)MOS stages (transparent on opposite clock phases) closed in a loop with a static inverter. This configuration implements a divide-by-2 (the loop contains an odd number of inversions, so the circuit toggles). Consequently every internal node produces a 50% duty-cycle square wave at \\(f_\\text{CK}/2\\).\n\nBecause the first stage updates on the rising edge of CK while the second stage updates on the falling edge, the two dynamic nodes \\(X\\) and \\(Y\\) are separated by half a clock period. Half a clock period equals 90° of the output period \\(2T_\\text{CK}\\). Thus \\(X\\) and \\(Y\\) (and likewise \\(X\\) and \\(Z=\\overline{Y}\\)) form a quadrature pair.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "fe379b1f7a80ccd8d09bcfbc1b3c219eb0198dd62662fcc4ed278ca53f972838"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies nominal divide-by-two quadrature from the opposite-phase latch updates, but omits both sources of non-ideal phase error: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 1948,
        "output_tokens": 8024,
        "total_tokens": 9972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 1948,
        "output_tokens": 8024,
        "total_tokens": 9972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two C\\(^2\\)MOS stages in a feedback loop (with one additional inversion from Inv3). The left stage is transparent while \\(CK=1\\) and the right stage is transparent while \\(CK=0\\), producing a master-slave toggle action that divides the input clock by two.\n\nThe resulting half-rate waveforms at the labeled nodes are square waves whose transitions are separated by one-quarter of the output period:\n- \\(X\\) and \\(Z\\) differ by \\(90^\\circ\\),\n- \\(X\\) and \\(Y\\) differ by \\(270^\\circ\\) (equivalently \\(90^\\circ\\)).\n\nThese are therefore a quadrature set.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "9fd3877b25384c2b9a0ef5407b6c54e6fcbe306af0b9193283bd76e752dcdff1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature, but omits the Inv3 delay and unequal latch loading that make the phase relationship non-exact.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1948,
        "output_tokens": 6755,
        "total_tokens": 8703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6611,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1948,
        "output_tokens": 6755,
        "total_tokens": 8703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6611,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of C\\(^2\\)MOS stages (clocked inverters using complementary clocks). In each stage the clocked transistors sit in series with the logic transistors, so the pull-up/pull-down path that charges or discharges an output node has resistance \\(R_\\text{clk}+R_\\text{logic}\\).\nWidening the clocked devices reduces \\(R_\\text{clk}\\). The only extra capacitance that appears is the diffusion capacitance at the internal stacked node; that contribution does not offset the reduction in resistance. Consequently the Elmore delay of every output node decreases and the circuit becomes faster.\nFinal answer: improve",
        "format": "markdown",
        "sha256": "8b1f90439d0d1821a92714d4313055252c62542249a9a0d72ce8cf5ee6e591e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed because it reduces their series resistance and adds little output loading. It omits the charge-sharing swing degradation that limits the improvement, so it does not meet the full-credit rule.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2019,
        "output_tokens": 9167,
        "total_tokens": 11186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9037,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2019,
        "output_tokens": 9167,
        "total_tokens": 11186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9037,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two tri-state (clocked) inverters connected in series, followed by a static inverter whose output is fed back to the input of the first clocked inverter. The two clocked inverters are enabled on opposite clock phases, yielding a divide-by-2 toggle flip-flop (the state on the dynamic nodes inverts once per clock cycle).\n\nThe four clocked transistors appear in series with the logic transistors that perform the inversions. Widening them therefore lowers the on-resistance of every pull-up and pull-down path while adding capacitance only on internal (non-output) nodes. Elmore delay of each clocked inverter consequently decreases, the dynamic nodes settle in a smaller fraction of the clock period, and the maximum clock frequency at which the circuit still toggles correctly rises.\n\nFinal answer: improve",
        "format": "markdown",
        "sha256": "8b71a1f0501fda2d14ee3d9f10d656bfee484b3581e66b907317eabe7b35b61f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed because it lowers on-resistance without substantially loading the outputs. It omits charge sharing, which degrades the swing and limits the improvement.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2019,
        "output_tokens": 8616,
        "total_tokens": 10635,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2019,
        "output_tokens": 8616,
        "total_tokens": 10635,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two cascaded C^{2}MOS inverters followed by a static inverter, with the static inverter's output fed back to the input of the first C^{2}MOS stage. This forms an edge-triggered toggle (divide-by-2) circuit whose maximum clock frequency is set by the delays through the C^{2}MOS stages.\nEach C^{2}MOS stage contains a logic transistor in series with a clocked transistor. Widening only the clocked devices reduces their on-resistance while leaving the capacitance at the dynamic output nodes essentially unchanged (those nodes see only the drain diffusion of the logic transistors). Elmore analysis of the stack confirms that the resulting RC delay therefore decreases, approaching the delay of the logic transistor alone. Consequently the timing constraints that bound the maximum clock frequency are relaxed and the circuit operates at higher speed.\nFinal answer: improve",
        "format": "markdown",
        "sha256": "d9b1cdf62324874c6be143994385cdaf4cffbeb8efd4e82a63353a324774d7c4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed and cites their reduced on-resistance with little added output loading. It omits charge sharing, which degrades swing and limits the improvement.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2019,
        "output_tokens": 8300,
        "total_tokens": 10319,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8123,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2019,
        "output_tokens": 8300,
        "total_tokens": 10319,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8123,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a ring of **3 inverters** with two series switches inserted in the loop (one driven by \\(CK\\), the other by \\(\\overline{CK}\\)).\n\nBecause the switch controls are complementary, the two switches are never on simultaneously. The ring is therefore **never closed**, so the circuit cannot oscillate (as a 3-stage ring oscillator otherwise would).\n\nIn every clock phase exactly one inverter input is left floating:\n- \\(CK=1\\): input of the second inverter floats;\n- \\(CK=0\\): input of Inv1 floats.\n\nFloating gate nodes produce undefined logic levels (and are susceptible to leakage). Consequently the arrangement is electrically invalid and performs neither a useful combinational nor a useful sequential function.\n\nFinal answer: invalid (floating nodes; loop never closed)",
        "format": "markdown",
        "sha256": "42773b1517c476e032c1ffb7a6078c149e326ab0bee30a3192ad38f1e14a3a53"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit invalid and denies its function. The figure is a dynamic-latch divide-by-two circuit whose output is half the input clock frequency.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1317,
        "output_tokens": 3895,
        "total_tokens": 5212,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3731,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1317,
        "output_tokens": 3895,
        "total_tokens": 5212,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3731,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a loop of three inverters interrupted by a pair of complementary MOS switches (transmission gates) driven by \\(CK\\) and \\(\\overline{CK}\\). Because the clocks are complementary the loop is never closed, so the circuit cannot function as a free-running ring oscillator.\n\nDynamic (capacitive) storage occurs at the internal nodes. Analysis of the two clock phases shows:\n\n- While \\(CK=1\\) the value present on the floating node after the second switch is buffered onto the loop and held.\n- On the falling edge of \\(CK\\) that stored value is inverted and written back into the loop.\n- The new value is then held through the subsequent low phase and the next high phase.\n\nConsequently every node toggles once per clock cycle (i.e., the circuit realises a negative-edge-triggered T flip-flop with \\(T=1\\)). All signals therefore appear at \\(f_{CK}/2\\).\n\n(The same behaviour is obtained with non-overlapping clocks; only a brief interval of clock overlap would close the three-inverter loop and produce a burst of oscillation.)\n\nFinal answer: negedge TFF (÷2)",
        "format": "markdown",
        "sha256": "61c0d2b800fa241b0017bb17d6228b3ddf500db68c96864398eb44af406eff90"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies dynamic storage and concludes the circuit divides the clock by two. The extra inverter-path and overlap details are secondary to the essential answer.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1317,
        "output_tokens": 5139,
        "total_tokens": 6456,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4901,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1317,
        "output_tokens": 5139,
        "total_tokens": 6456,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4901,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a loop containing three inverters and two complementary MOS switches (pass transistors or transmission gates). The switches are never on simultaneously, so the loop is never closed and the circuit cannot function as a ring oscillator.\n\nThe circuit is dynamic (relies on charge storage at floating nodes). Analysis of the two clock phases shows the following:\n\n- While \\(\\mathrm{CK}=1\\) (\\(\\overline{\\mathrm{CK}}=0\\)), the first switch is on and the second is off. The value present at the input of the second inverter pair is held on capacitance and the output of the final inverter simply follows that stored value.\n- On the falling edge of \\(\\mathrm{CK}\\) the second switch turns on. The signal then propagates through all three inverters (an odd number of inversions) and the stored value is therefore inverted.\n- The inverted value is held throughout the subsequent \\(\\mathrm{CK}=1\\) phase.\n\nConsequently the signal at any node toggles once per clock cycle (specifically on the falling edge of \\(\\mathrm{CK}\\)). The circuit is a dynamic divide-by-2 (a T flip-flop with \\(T=1\\)).\n\nBecause operation depends on stored charge, the clock must be fast enough to avoid leakage-induced corruption yet slow enough for the inverters to settle.\n\nFinal answer: dynamic \\(\\div 2\\) (TFF)",
        "format": "markdown",
        "sha256": "dfec74518618af5814720e0eeca419433df2de2278abf86ab1b731c7b373c6b0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic divide-by-two. The detailed phase and inverter-path claims are secondary under the full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1317,
        "output_tokens": 5513,
        "total_tokens": 6830,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5233,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1317,
        "output_tokens": 5513,
        "total_tokens": 6830,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5233,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter functions as a keeper (weak feedback path) on the dynamic storage node. This holds logic levels against leakage, converting the circuit from dynamic to static (correct operation down to DC/zero clock frequency). The extra diffusion/gate capacitance plus contention while overpowering the keeper during writes both increase delay and short-circuit power.\n\nFinal answer: keeper (static hold; +delay/contention)",
        "format": "markdown",
        "sha256": "a447ac7f52bdb5dd6c284fcda09246d5e28dd7ee75364eda5b361898beaf637a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a keeper and claims it enables operation at DC. It is an unclocked feedforward path that improves high-speed operation but raises the minimum usable clock frequency; the candidate reverses both key effects.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1208,
        "output_tokens": 17715,
        "total_tokens": 18923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1208,
        "output_tokens": 17715,
        "total_tokens": 18923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is a keeper (weak feedback) that staticizes the otherwise dynamic storage node(s). This eliminates hold-time failure from leakage, enabling correct operation down to DC. Because the keeper fights the forward path during writes, it adds contention that slightly increases delay and short-circuit power (the keeper must therefore be downsized).\n\nFinal answer: keeper (staticizes; slight delay/power penalty)",
        "format": "markdown",
        "sha256": "51030633060d4d46bb3fe33a0b766af768ec529cbe8959022aaf232a29cc4796"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the red inverter as a keeper and claims it enables DC operation. In fact, it is an unclocked feedforward path that improves high-speed operation but raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1208,
        "output_tokens": 10275,
        "total_tokens": 11483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10192,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1208,
        "output_tokens": 10275,
        "total_tokens": 11483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10192,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is a feedback keeper. It renders the latch static (state retained indefinitely by regeneration, with far higher noise immunity and no refresh requirement) rather than dynamic. The price is contention during writes (the keeper must be overpowered), which increases delay, area and power; the keeper is therefore deliberately sized weak.\n\nFinal answer: keeper (static vs dynamic; contention)",
        "format": "markdown",
        "sha256": "5e75ee09721ed803d79336912014ef9d25e59c1c4a299183697d12e518475f56"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a feedback keeper. It is an unclocked feedforward path that bypasses part of the first latch, improving high-speed operation but raising the minimum usable clock frequency at low rates.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1208,
        "output_tokens": 13670,
        "total_tokens": 14878,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13595,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1208,
        "output_tokens": 13670,
        "total_tokens": 14878,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13595,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No, I do not agree.\n\nThe red inverter is wired in parallel with Inv1 (same input node after the CK switch, same output node). It simply strengthens that stage. It does not close a feedback path, so it does not form a cross-coupled latch. The storage node after the CK switch therefore remains dynamic and is still subject to leakage; a minimum clock frequency is still required.\n\n(The second stage after the \\(\\overline{\\mathrm{CK}}\\) switch is likewise dynamic and is unaffected by the red device.)",
        "format": "markdown",
        "sha256": "7ffd8ac72ea85536f45fed5e86005ec907a925446b458d92f5120cda1b4a561e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation, but misstates the wiring: the red inverter is a feedforward branch from before the CK switch to Inv1’s output, not a parallel strengthening stage. It misses the speed benefit and low-frequency failure mechanism, and incorrectly attributes the frequency limit to leakage.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1253,
        "output_tokens": 22359,
        "total_tokens": 23612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22254,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1253,
        "output_tokens": 22359,
        "total_tokens": 23612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22254,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No, I do not agree.\n\nThe red inverter is a (typically weak) keeper that cross-couples with Inv1 and thereby staticizes the dynamic node at Inv1’s input. That node can therefore hold its value indefinitely against leakage. However, the node after the \\(\\overline{\\mathrm{CK}}\\) switch remains purely dynamic. When CK stays high for a long time that node leaks, the two downstream inverters produce an incorrect value of A, and the still-closed CK switch writes the wrong value into the first latch. Consequently a minimum clock frequency (more precisely a maximum CK-high interval) still exists.\n\nThe red device’s only role is therefore to keep one of the two dynamic nodes; it does not make the whole circuit static.",
        "format": "markdown",
        "sha256": "67f87ee312dd9d46ca577291f701f2e1451fcd1083a8213d6bb4262ff56cd078"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly rejects the claim that the circuit has no minimum clock frequency, but wrongly describes the red inverter as a cross-coupled keeper. It misses its actual feedforward role and the low-frequency behavior that raises the minimum usable clock rate.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1253,
        "output_tokens": 20402,
        "total_tokens": 21655,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1253,
        "output_tokens": 20402,
        "total_tokens": 21655,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No, I do not agree.\n\nThe red inverter is a (typically weak) keeper on the dynamic node at the input of Inv1. Together with Inv1 it does form a cross-coupled pair, so that node is statically held and is immune to leakage.\n\nThe circuit as a whole is a master-slave toggle flip-flop (i.e., a clock divider). The second stage still contains an unprotected floating node (the net after the \\(\\overline{\\text{CK}}\\) switch). Leakage on that node continues to impose a maximum width on the CK-high phase and therefore a minimum clock frequency. The added inverter does not eliminate the restriction.\n\nFinal answer: no (keeper on 1st stage only)",
        "format": "markdown",
        "sha256": "cb7b1a98b6a944c138d50622cc5d30b1205b43605546e746ae6262094abaedda"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer wrongly identifies the red inverter as a cross-coupled keeper and misses its actual feedforward role and low-frequency tradeoff. It gets limited credit for recognizing that the clock-frequency restriction is not eliminated.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1253,
        "output_tokens": 18657,
        "total_tokens": 19910,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18512,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1253,
        "output_tokens": 18657,
        "total_tokens": 19910,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18512,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a complementary shunt-shunt feedback LNA. With finite MOSFET output resistance the input impedance is\n\\[\nR_\\text{in}=\\frac{R_F+r_o}{1+G_m r_o},\\qquad G_m=g_{m1}+g_{m2}.\n\\]\nSetting \\(R_\\text{in}=50\\,\\Omega\\) therefore constrains the product \\(G_m R_F\\). The two dominant noise sources that remain after this constraint is imposed are the channel noise \\(4kT\\gamma G_m\\) and the thermal noise of \\(R_F\\). Both contributions (when referred to the input) fall as \\(G_m\\) and \\(R_F\\) are increased together while the matching condition is kept satisfied. Consequently NF is minimized by simultaneously raising the transconductances (larger device widths and/or bias current) and the feedback resistor.\n\nFinal answer: increase \\(g_m\\) of \\(M_{1,2}\\) & \\(R_F\\) (keep \\(R_\\text{in}=50\\))",
        "format": "markdown",
        "sha256": "ff1e016ef8b0927f300bf48febad87b69f15ad5aa95b7f3f42ccb902d9ee99b4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the finite-o input-resistance relation and correctly recommends increasing G_m and R_F together while maintaining the 50  match, which reduces NF. The minor imprecision in calling the match a constraint on their product does not change the conclusion.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2299,
        "output_tokens": 13907,
        "total_tokens": 16206,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2299,
        "output_tokens": 13907,
        "total_tokens": 16206,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a shunt-feedback inverter LNA. Under the usual approximations its input resistance is\n\\[\nR_\\text{in}\\approx\\frac{R_F}{1+|A_v|},\\qquad |A_v|\\propto g_{m1}+g_{m2}.\n\\]\nThe dominant noise sources that set NF are the channel noise of \\(M_1,M_2\\) (input-referred voltage \\(\\propto 1/g_m\\)) and the thermal noise of \\(R_F\\) (contribution falls as \\(R_F\\) is increased). Consequently both \\(g_m\\) and \\(R_F\\) must be raised together so that the ratio above remains exactly \\(50\\,\\Omega\\). (In practice this is realized by widening the transistors, raising their bias current, and scaling \\(R_F\\) accordingly.) The resulting NF monotonically improves and approaches the limit set by the excess-noise factor \\(\\gamma\\) of the MOS devices.\n\nFinal answer: increase \\(g_m\\) & \\(R_F\\) (keep \\(R_\\text{in}=50\\Omega\\))",
        "format": "markdown",
        "sha256": "6cd2b967a746446d91b05e77e881f9906ff8d047335a5999f70cb18b3ca2cac8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct practical direction—raise gm and RF together while maintaining the match—and a plausible noise intuition. But it omits the finite-output-resistance mechanism that permits gm to exceed 1/Rs and NF to fall below 1+γ, and its γ-set limiting claim is misleading.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2299,
        "output_tokens": 14907,
        "total_tokens": 17206,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2299,
        "output_tokens": 14907,
        "total_tokens": 17206,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a self-biased CMOS inverter with shunt-shunt resistive feedback, used as a wideband LNA. In this topology the (real) input resistance seen after the DC-blocking capacitor is\n\\[\nR_\\text{in}=\\frac{R_F+r_o}{1+g_m r_o},\n\\]\nwhere \\(g_m=g_{m1}+g_{m2}\\) and \\(r_o=r_{o1}\\parallel r_{o2}\\). Setting \\(R_\\text{in}=50\\,\\Omega\\) therefore constrains the product of \\(R_F\\) and the inverter gain.\n\nThe dominant noise sources are the channel thermal noise of \\(M_1,M_2\\) (\\(\\propto\\gamma g_m\\)) and the thermal noise of \\(R_F\\). Both contributions, when referred to the input, fall as \\(g_m\\) is increased. Consequently NF is minimized by enlarging the transistors (higher \\(W\\), higher bias current, constant overdrive) while simultaneously raising \\(R_F\\) so that the expression for \\(R_\\text{in}\\) remains exactly \\(50\\,\\Omega\\).\n\n(The coupling capacitor \\(C_1\\) is chosen only large enough to be a short at the frequencies of interest and does not enter the NF/\\(R_\\text{in}\\) trade-off.)\n\nFinal answer: increase \\(W\\) (\\(g_m\\)) of \\(M_{1,2}\\) & raise \\(R_F\\) to hold \\(R_\\text{in}=50\\Omega\\)",
        "format": "markdown",
        "sha256": "bb5fb5ac1cc9a603552c13d05b41f7efb945b36d76e9791c69208cb3bd6a3592"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly includes finite output resistance in the input-resistance relation and recommends increasing gm while raising RF to preserve the 50 Ω match. It also identifies the relevant noise sources and explains that their input-referred contributions decrease as gm rises, capturing the optimization described in the golden solution.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2299,
        "output_tokens": 13517,
        "total_tokens": 15816,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13189,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2299,
        "output_tokens": 13517,
        "total_tokens": 15816,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13189,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a two-stage transimpedance amplifier with shunt-shunt feedback via \\(R_F\\). The first stage is the common-source device \\(M_1\\) (voltage gain \\(-g_{m1}R_{D1}\\)). The second stage is the PMOS differential pair \\(M_2\\)-\\(M_3\\) with the signal applied to only one input (voltage gain \\(+g_{m2}R_{D2}/2\\)). The resulting open-loop voltage gain therefore has magnitude\n\\[\nA=\\frac12 g_{m1}R_{D1}g_{m2}R_{D2}.\n\\]\nBecause the input node is a MOSFET gate, the only path for the input current is through the feedback resistor. Consequently the closed-loop input resistance is\n\\[\nR_\\text{in}=\\frac{R_F}{1+A}=\\frac{R_F}{1+\\frac12 g_{m1}R_{D1}g_{m2}R_{D2}}.\n\\]\n(The loading of \\(R_F\\) on the second-stage output node is neglected, which is valid when \\(R_F\\gg R_{D2}\\).)\n\nFinal answer: \\(R_\\text{in}=\\dfrac{R_F}{1+\\frac12 g_{m1}R_{D1}g_{m2}R_{D2}}\\)",
        "format": "markdown",
        "sha256": "d7aa151667acf2d08726311b97775438aa47493e0c65ec0d03cc5fe7e9c1f7a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The topology and unloaded gain are correctly identified, and the stated result is a valid approximation when RF ≫ RD2. It omits the exact output-resistance contribution: Rin = (RF + RD2)/(1 + A0).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 417,
        "output_tokens": 25100,
        "total_tokens": 25517,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24800,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 417,
        "output_tokens": 25100,
        "total_tokens": 25517,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24800,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a two-stage transimpedance amplifier with shunt-shunt feedback via \\(R_F\\). Transistor \\(M_1\\) is a common-source stage with voltage gain \\(-g_{m1}R_{D1}\\) from node \\(P\\) to node \\(X\\). Transistors \\(M_2\\) and \\(M_3\\) form a differential pair (identical devices) whose single-ended voltage gain from \\(X\\) to the output is \\(g_{m2}R_{D2}/2\\). Consequently the open-loop voltage gain (neglecting the feed-forward path through \\(R_F\\)) has magnitude\n\\[\nkR_{D2}=\\frac{g_{m1}g_{m2}R_{D1}R_{D2}}{2}.\n\\]\n\nA test current \\(i_\\mathrm{in}\\) injected at \\(P\\) produces\n\\[\ni_\\mathrm{in}=\\frac{v_P-v_\\mathrm{out}}{R_F}.\n\\]\nNodal analysis at the output (including the loading of \\(R_F\\) on \\(R_{D2}\\) and the controlled current of the differential pair) yields the exact closed-loop relationship\n\\[\nR_\\mathrm{in}=\\frac{v_P}{i_\\mathrm{in}}=\\frac{R_F+R_{D2}}{1+\\frac{g_{m1}g_{m2}R_{D1}R_{D2}}{2}}.\n\\]\n(The same expression is obtained whether the pair is realized with NMOS or PMOS devices.)\n\nFinal answer: \\(\\dfrac{R_F+R_{D2}}{1+\\dfrac{g_{m1}g_{m2}R_{D1}R_{D2}}{2}}\\)",
        "format": "markdown",
        "sha256": "9306419dd5247f5f06fff53e3ea024616f9866c0ff48fca307db65bcaee97b2e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact input-resistance expression and the corresponding unloaded gain, including the output resistance RD2 in the numerator as required by the two-stage model.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 417,
        "output_tokens": 17837,
        "total_tokens": 18254,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 417,
        "output_tokens": 17837,
        "total_tokens": 18254,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit employs shunt-shunt feedback around a two-stage core amplifier, with the input taken at the gate of \\(M_1\\). Transistors \\(M_2\\) and \\(M_3\\) are matched and form a PMOS differential pair biased by the ideal tail current \\(I_{SS}\\). Channel-length modulation and body effect are neglected.\n\nThe first-stage conversion from \\(v_{\\mathrm{in}}\\) to the differential-pair input is\n\\[\nv_X=-g_{m1}R_{D1}v_{\\mathrm{in}}.\n\\]\nThe differential pair then steers a small-signal current\n\\[\ni_{SD3}=\\frac{g_{m2}}{2}v_X\n\\]\ninto the output node. KCL at that node (including the current through \\(R_F\\)) together with KCL at the input node\n\\[\ni_{\\mathrm{in}}=\\frac{v_{\\mathrm{in}}-v_{\\mathrm{out}}}{R_F}\n\\]\nyields the low-frequency input resistance\n\\[\nR_{\\mathrm{in}}=\\frac{R_F+R_{D2}}{1+\\frac12 g_{m1}g_{m2}R_{D1}R_{D2}}.\n\\]\n\nFinal answer: \\(\\dfrac{R_F+R_{D2}}{1+\\frac12 g_{m1}g_{m2}R_{D1}R_{D2}}\\)",
        "format": "markdown",
        "sha256": "c016b4b4c811b8050f6f3f4606756c31d0a80679b0eef0a238c00c1a283bdb7f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact input resistance, including the output-side resistance of the feedback path, and the equivalent unloaded gain factor. The use of gm2 is consistent with the matched-pair notation.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 417,
        "output_tokens": 16953,
        "total_tokens": 17370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16643,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 417,
        "output_tokens": 16953,
        "total_tokens": 17370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16643,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO output voltage \\(V_\\text{out}\\) sets the DC common-mode level at the tank nodes \\(X,Y\\). Consequently the varactors (and other voltage-dependent capacitances) experience a bias of \\(V_\\text{out}-V_\\text{cont}\\), producing a supply-pushing sensitivity\n\\[\nK_{VDD}=\\frac{\\partial f_\\text{osc}}{\\partial V_\\text{out}}\\qquad(\\text{Hz/V}).\n\\]\nA voltage-noise spectrum \\(S_\\text{th}\\) (one-sided, \\(\\text{V}^2/\\text{Hz}\\)) therefore appears as a frequency-noise spectrum \\(K_{VDD}^2S_\\text{th}\\). Converting frequency noise to phase and taking the single-sideband definition of phase noise yields\n\\[\n\\mathcal{L}(\\Delta f)=\\frac{K_{VDD}^2S_\\text{th}}{2(\\Delta f)^2}.\n\\]\n\nFinal answer: \\(\\mathcal{L}(\\Delta f)=K_{VDD}^2 S_{th}/[2(\\Delta f)^2]\\)",
        "format": "markdown",
        "sha256": "8571a662350e6fb6f12aa93ad20180a64ce5d3462fd9d1070e93f2ee14ff3ff8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing, converts the LDO noise to frequency noise, and gives the 1/Δf² phase-noise dependence. It notes the direct varactor biasing but does not state that Kpush is closely related to KVCO or that reducing KVCO reduces the conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2678,
        "output_tokens": 3657,
        "total_tokens": 6335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3418,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2678,
        "output_tokens": 3657,
        "total_tokens": 6335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3418,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO output \\(V_\\text{out}\\) is the VCO supply (DC voltage at the tank nodes \\(X,Y\\)). Consequently the oscillation frequency depends on \\(V_\\text{out}\\) through the varactor bias (\\(V_\\text{out}-V_\\text{cont}\\)) and through supply pushing of the cross-coupled pair; the resulting sensitivity is the pushing factor\n\\[\nK_{VDD}=\\frac{\\partial f_\\text{osc}}{\\partial V_\\text{out}}\\qquad(\\text{Hz/V}).\n\\]\nA voltage fluctuation \\(v_n(t)\\) on \\(V_\\text{out}\\) therefore produces an instantaneous frequency deviation \\(K_{VDD}v_n(t)\\). The corresponding excess phase is the integral of that deviation, which in the frequency domain multiplies the (one-sided) noise spectrum \\(S_\\text{th}\\) by \\((K_{VDD}/f_m)^2\\). Converting to single-sideband phase noise yields\n\\[\n\\mathcal{L}(f_m)=\\frac{K_{VDD}^2}{2f_m^2}S_\\text{th}.\n\\]\n\nFinal answer: \\(\\mathcal{L}(f_m)=K_{VDD}^2 S_{th}/(2f_m^2)\\)",
        "format": "markdown",
        "sha256": "0cf38964bf910e9f665a796bd6eafc009d36dee10fec78ad8947093cb4d9361f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing, uses the frequency sensitivity, and applies FM-to-phase conversion with the expected 1/f_m^2 dependence. It omits the design insight that Kpush is closely related to KVCO here, so reducing KVCO reduces this noise conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2678,
        "output_tokens": 3783,
        "total_tokens": 6461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2678,
        "output_tokens": 3783,
        "total_tokens": 6461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3502,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO output noise appears as a voltage disturbance on the oscillator supply node \\(V_\\text{out}\\). This modulates the instantaneous oscillation frequency through the VCO supply-pushing factor\n\\[\nK_\\text{push}=\\frac{\\partial f_\\text{osc}}{\\partial V_\\text{out}}\n\\]\n(principally via the voltage dependence of the MOS varactors and of the parasitic capacitances of \\(M_1,M_2\\)).\n\nA sinusoidal supply disturbance of peak amplitude \\(A\\) therefore produces a peak frequency deviation \\(K_\\text{push}A\\). The resulting modulation index at offset \\(f_m\\) is \\(\\beta=K_\\text{push}A/f_m\\), and each PM sideband relative to the carrier is \\((\\beta/2)^2\\). Replacing the sine-wave by a one-sided noise density \\(S_\\text{th}\\) (so that \\(A=\\sqrt{2S_\\text{th}}\\) in a 1 Hz bandwidth) immediately yields the single-sideband phase noise\n\\[\n\\mathcal{L}(f_m)=10\\log_{10}\\Bigl(\\frac{K_\\text{push}^2S_\\text{th}}{2f_m^2}\\Bigr).\n\\]\n\n(The same result follows from the frequency-modulation relation \\(S_\\phi(f)=(K_\\text{push}/f)^2S_\\text{th}\\) together with the definition \\(\\mathcal{L}=S_\\phi/2\\).) Direct additive leakage of the LDO noise onto the differential outputs \\(X-Y\\) is rejected by symmetry and does not contribute to \\(\\mathcal{L}\\).\n\nFinal answer: \\(\\mathcal{L}(f_m)=10\\log_{10}(K_\\text{push}^2 S_\\text{th}/(2f_m^2))\\)",
        "format": "markdown",
        "sha256": "2888856e4a24673865acda0f0278d8f17528a10cfd36f37f647231a97cf58417"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing and applies FM-to-PM conversion with the correct 1/f_m^2 dependence and phase-noise expression. It omits the design insight that K_push is closely related to K_VCO here, so reducing K_VCO reduces this noise conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2678,
        "output_tokens": 5218,
        "total_tokens": 7896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2678,
        "output_tokens": 5218,
        "total_tokens": 7896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a standard cross-coupled LC oscillator. Noise from the tail current source around \\(2\\omega_0\\) is mixed to the oscillation frequency by the switching action of \\(M_1/M_2\\) and appears as phase noise. The added capacitor \\(C_T\\) shunts this noise away from the differential pair, reducing the phase-noise contribution of \\(I_{SS}\\).\n\nFinal answer: phase noise decreases",
        "format": "markdown",
        "sha256": "3dcedb61f52512e1b451726260311fc52778c0daa171d193f40672c22c5e9af1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives a monotonic phase-noise improvement from shunting tail noise, missing the nonmonotonic behavior and the class-C, flicker-upconversion, or large-capacitance instability effects.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2651,
        "output_tokens": 4330,
        "total_tokens": 6981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4242,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2651,
        "output_tokens": 4330,
        "total_tokens": 6981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4242,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a standard NMOS cross-coupled LC oscillator. Thermal noise from \\(I_{SS}\\) near \\(2\\omega_0\\) is mixed down to the carrier by the switching action of \\(M_1/M_2\\) and appears as phase noise. The added capacitor \\(C_T\\) shunts this noise to ground, suppressing the mixing process (it also reduces the associated AM-to-PM conversion). Consequently the phase-noise contribution of the tail source falls and overall oscillator phase noise improves.\n\nFinal answer: PN decreases (tail noise filtered)",
        "format": "markdown",
        "sha256": "0bdc30b893c78025ef234697211cbdb82f1fcdbdd500f155761848ebd62c713b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It predicts a monotonic phase-noise improvement from tail-noise filtering, missing the nonmonotonic effect and the class-C improvement and possible degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 2651,
        "output_tokens": 2281,
        "total_tokens": 4932,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 2651,
        "output_tokens": 2281,
        "total_tokens": 4932,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The added capacitor \\(C_T\\) shunts high-frequency noise originating in the tail current source. Noise components near \\(2\\omega_0\\) (which would otherwise mix to the vicinity of the carrier) are thereby attenuated, lowering the oscillator's phase noise.\n\nFinal answer: PN decreases",
        "format": "markdown",
        "sha256": "98584f41b3b870f446c95c067db7ecf7b658a8b2d63251b539648f0b50210744"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It claims a monotonic phase-noise improvement from filtering tail noise, missing the nonmonotonic effect and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2651,
        "output_tokens": 5422,
        "total_tokens": 8073,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5364,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2651,
        "output_tokens": 5422,
        "total_tokens": 8073,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5364,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two identical differential LC oscillators that are coupled (via the additional differential pairs biased at \\(I_1\\)) so as to run in quadrature. Each oscillator employs a pair of inductors as the tank inductance. Although explicit tank capacitors are not drawn, they are invariably present (either as added capacitors/varactors or as the parasitics of the transistors and inductors). Consequently the free-running frequency of each tank, and therefore the oscillation frequency of the coupled system, is the tank resonance\n\n\\[\nf_\\text{osc}\\approx\\frac{1}{2\\pi\\sqrt{LC}}.\n\\]\n\n(The coupling produced by \\(I_1\\) introduces only a small fractional shift of order \\(I_1/I_\\text{SS}Q\\), which is neglected in a first-order estimate.)\n\nFinal answer: \\(1/(2\\pi\\sqrt{LC})\\)",
        "format": "markdown",
        "sha256": "98cf23a9f60568e8ebcd2ee4f49049c401e11e8466bde7cde47a77fb7e63caac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gives the correct tank resonance and recognizes a coupling-induced shift with the expected current-ratio and Q scaling. However, it neglects that shift in its final estimate instead of including the correction, approximately Δf/f₀ ≈ (I₁/Iₛₛ)/(2Q).",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1742,
        "output_tokens": 4185,
        "total_tokens": 5927,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4003,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1742,
        "output_tokens": 4185,
        "total_tokens": 5927,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4003,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two identical differential LC oscillators with parallel coupling (via the additional transistor pairs biased by \\(I_1\\)) to enforce a quadrature relationship between the two tanks. Each tank therefore oscillates at (or extremely near) its natural resonant frequency\n\n\\[\nf_\\text{osc}\\approx\\frac{1}{2\\pi\\sqrt{LC}},\n\\]\n\nwhere \\(L\\) is the inductance shown in the schematic and \\(C\\) is the total capacitance appearing in parallel with that inductance (explicit tank capacitors plus device parasitics). The coupling currents produce only a small shift away from this value, of second order in the coupling factor \\(I_1/I_\\text{SS}\\).\n\nFinal answer: \\(1/(2\\pi\\sqrt{LC})\\)",
        "format": "markdown",
        "sha256": "64456b7e6ab10cad7018855845b7ecdc47c764f0b9029bc9e8c7743ee116b942"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the uncoupled tank resonance, but omits the first-order coupling-induced frequency shift and incorrectly describes that shift as second order in the coupling factor.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1742,
        "output_tokens": 3709,
        "total_tokens": 5451,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3554,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1742,
        "output_tokens": 3709,
        "total_tokens": 5451,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3554,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.6",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two identical LC oscillators. Each oscillator is formed from a differential LC tank together with a cross-coupled NMOS pair (biased by \\(I_{SS}\\)) that supplies the negative resistance needed to sustain oscillation. (The tank capacitors are omitted from the schematic but are understood to lie in parallel with the drawn inductors.)\n\nThe remaining NMOS pairs (biased by \\(I_1\\)) have their gates driven by the opposite oscillator, thereby coupling the two tanks. The sense of the coupling forces the two oscillators into quadrature lock, producing the four phases \\(X_1,Y_1,X_2,Y_2\\).\n\nBecause the coupling transistors appear in parallel with the regenerative pairs, they contribute only a small reactive current. Consequently the oscillation frequency remains essentially the tank resonance:\n\\[\nf_\\text{osc}\\approx\\frac{1}{2\\pi\\sqrt{LC}}.\n\\]\n\nFinal answer: \\(\\dfrac{1}{2\\pi\\sqrt{LC}}\\)",
        "format": "markdown",
        "sha256": "5277015505cb12bdf228fcb00a7188f8c76d9179d6135b723a137e839ec08ad1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives the uncoupled tank resonance but omits the required coupling-induced frequency shift and incorrectly claims coupling leaves the frequency essentially unchanged.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1742,
        "output_tokens": 6225,
        "total_tokens": 7967,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6023,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1742,
        "output_tokens": 6225,
        "total_tokens": 7967,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6023,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    }
  ]
}
