{
  "model_key": "grok_4_7",
  "display_name": "Grok 4.7",
  "provider": "xai",
  "evaluation_model_ids": [],
  "thinking_effort": "xhigh",
  "configuration_note": "Grok 4.7 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (x-ai/grok-4.7) at reasoning effort xhigh, the highest it offers. Requests set temperature to 0 and max_tokens to 450,000, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Grok 4.7 on 2026-11-10 ($2.00 input, $0.50 cached input, $6.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 85,
          "incorrect_count": 65,
          "partial_credit_count": 46,
          "zero_count": 19,
          "mean_score_0_to_4": 2.8466666666666667,
          "score_percent": 71.16666666666667,
          "score_distribution": {
            "0": 19,
            "1": 15,
            "2": 21,
            "3": 10,
            "4": 85
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 85,
          "incorrect_count": 65,
          "partial_credit_count": 46,
          "zero_count": 19,
          "mean_score_0_to_4": 2.8466666666666667,
          "score_percent": 71.16666666666667,
          "score_distribution": {
            "0": 19,
            "1": 15,
            "2": 21,
            "3": 10,
            "4": 85
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 64,
          "incorrect_count": 26,
          "partial_credit_count": 8,
          "zero_count": 18,
          "mean_score_0_to_4": 3.022222222222222,
          "score_percent": 75.55555555555556,
          "score_distribution": {
            "0": 18,
            "1": 2,
            "2": 4,
            "3": 2,
            "4": 64
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 64,
          "incorrect_count": 26,
          "partial_credit_count": 8,
          "zero_count": 18,
          "mean_score_0_to_4": 3.022222222222222,
          "score_percent": 75.55555555555556,
          "score_distribution": {
            "0": 18,
            "1": 2,
            "2": 4,
            "3": 2,
            "4": 64
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 21,
          "incorrect_count": 39,
          "partial_credit_count": 38,
          "zero_count": 1,
          "mean_score_0_to_4": 2.5833333333333335,
          "score_percent": 64.58333333333334,
          "score_distribution": {
            "0": 1,
            "1": 13,
            "2": 17,
            "3": 8,
            "4": 21
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 21,
          "incorrect_count": 39,
          "partial_credit_count": 38,
          "zero_count": 1,
          "mean_score_0_to_4": 2.5833333333333335,
          "score_percent": 64.58333333333334,
          "score_distribution": {
            "0": 1,
            "1": 13,
            "2": 17,
            "3": 8,
            "4": 21
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 28,
        "incorrect_count": 22,
        "partial_credit_count": 16,
        "zero_count": 6,
        "mean_score_0_to_4": 2.8,
        "score_percent": 70.0,
        "score_distribution": {
          "0": 6,
          "1": 6,
          "2": 8,
          "3": 2,
          "4": 28
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 29,
        "incorrect_count": 21,
        "partial_credit_count": 14,
        "zero_count": 7,
        "mean_score_0_to_4": 2.88,
        "score_percent": 72.0,
        "score_distribution": {
          "0": 7,
          "1": 4,
          "2": 6,
          "3": 4,
          "4": 29
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 28,
        "incorrect_count": 22,
        "partial_credit_count": 16,
        "zero_count": 6,
        "mean_score_0_to_4": 2.86,
        "score_percent": 71.5,
        "score_distribution": {
          "0": 6,
          "1": 5,
          "2": 7,
          "3": 4,
          "4": 28
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 192896,
        "input_tokens": 399972,
        "output_tokens": 2057495,
        "total_tokens": 2457467
      },
      "known_totals": {
        "cached_input_tokens": 192896,
        "input_tokens": 399972,
        "output_tokens": 2057495,
        "total_tokens": 2457467
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 21,
          "incorrect_count": 9,
          "partial_credit_count": 3,
          "zero_count": 6,
          "mean_score_0_to_4": 2.966666666666667,
          "score_percent": 74.16666666666667,
          "score_distribution": {
            "0": 6,
            "1": 1,
            "2": 2,
            "4": 21
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 22,
          "incorrect_count": 8,
          "partial_credit_count": 2,
          "zero_count": 6,
          "mean_score_0_to_4": 3.1,
          "score_percent": 77.5,
          "score_distribution": {
            "0": 6,
            "2": 1,
            "3": 1,
            "4": 22
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 21,
          "incorrect_count": 9,
          "partial_credit_count": 3,
          "zero_count": 6,
          "mean_score_0_to_4": 3.0,
          "score_percent": 75.0,
          "score_distribution": {
            "0": 6,
            "1": 1,
            "2": 1,
            "3": 1,
            "4": 21
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 7,
          "incorrect_count": 13,
          "partial_credit_count": 13,
          "zero_count": 0,
          "mean_score_0_to_4": 2.55,
          "score_percent": 63.74999999999999,
          "score_distribution": {
            "1": 5,
            "2": 6,
            "3": 2,
            "4": 7
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 7,
          "incorrect_count": 13,
          "partial_credit_count": 12,
          "zero_count": 1,
          "mean_score_0_to_4": 2.55,
          "score_percent": 63.74999999999999,
          "score_distribution": {
            "0": 1,
            "1": 4,
            "2": 5,
            "3": 3,
            "4": 7
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 7,
          "incorrect_count": 13,
          "partial_credit_count": 13,
          "zero_count": 0,
          "mean_score_0_to_4": 2.65,
          "score_percent": 66.25,
          "score_distribution": {
            "1": 4,
            "2": 6,
            "3": 3,
            "4": 7
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is \\(A_v=g_m r_o\\).\n\nWith fixed bias voltages (hence fixed overdrive), doubling both \\(W\\) and \\(L\\) leaves the ratio \\(W/L\\) unchanged. Consequently both \\(I_D\\) and \\(g_m\\) are unchanged. Because the channel-length modulation parameter satisfies \\(\\lambda\\propto 1/L\\), doubling \\(L\\) halves \\(\\lambda\\). With \\(I_D\\) constant this doubles \\(r_o\\).\n\nTherefore \\(A_v\\) doubles. (Equivalently, \\(A_v\\propto L/V_{ov}\\) at constant overdrive, so the same factor-of-two increase is obtained.)\n\nFinal answer: doubles",
        "format": "markdown",
        "sha256": "5ba93cc3f15047268c6d0c5c659b0d8b9ce796c4d7c34e644c874b47d79baad2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that at fixed overdrive, doubling both dimensions leaves W/L, drain current, and gm approximately unchanged, while the longer channel doubles ro and intrinsic gain.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1261,
        "output_tokens": 1571,
        "total_tokens": 2832,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1415,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1261,
        "output_tokens": 1571,
        "total_tokens": 2832,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1415,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is \\(A_v=g_m r_o\\). In saturation this equals \\(2/(\\lambda V_{ov})\\). Because \\(\\lambda\\propto 1/L\\), it follows that\n\\[\nA_v\\propto\\frac{L}{V_{ov}}.\n\\]\nDoubling both \\(W\\) and \\(L\\) leaves the ratio \\(W/L\\) unchanged. Consequently the over-drive \\(V_{ov}\\) that corresponds to any given bias current (or to any given \\(V_{GS}\\)) is also unchanged, while \\(L\\) itself doubles. The intrinsic gain therefore doubles.\n\nFinal answer: doubles",
        "format": "markdown",
        "sha256": "9665f10f963722f63bd09e4c52da9ce7f2e1c02bf4f7a14f1205340fd682cc35"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain doubles and explains the mechanism: unchanged W/L keeps overdrive and transconductance approximately unchanged, while doubling L reduces λ and doubles output resistance.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1261,
        "output_tokens": 3297,
        "total_tokens": 4558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3160,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1261,
        "output_tokens": 3297,
        "total_tokens": 4558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3160,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is \\(A_0=g_mr_o\\). With the square-law model this equals \\(2V_A/V_{ov}\\), where the Early voltage satisfies \\(V_A\\propto L\\).\n\nDoubling both \\(W\\) and \\(L\\) leaves the ratio \\(W/L\\) unchanged. Consequently, when the device is biased at the same gate-source voltage (or, equivalently, at the same drain current), the over-drive \\(V_{ov}\\) is unchanged while \\(V_A\\) doubles. The intrinsic gain therefore doubles.\n\nFinal answer: doubles",
        "format": "markdown",
        "sha256": "5988d34afb6e00c9deb079f506009902367cfc27b5df94accda12bd70d9e1414"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling both dimensions leaves W/L and, under the stated bias assumption, gm and drain current approximately unchanged, while ro (or VA) doubles; hence intrinsic gain doubles.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1261,
        "output_tokens": 2628,
        "total_tokens": 3889,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2501,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1261,
        "output_tokens": 2628,
        "total_tokens": 3889,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2501,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The MOSFET transconductance in saturation is obtained by differentiating the square-law drain current with respect to gate-source voltage (device dimensions fixed):\n\n\\[\ng_m=\\mu C_{\\rm ox}\\frac{W}{L}V_{\\rm ov}.\n\\]\n\nThus \\(g_m\\) rises linearly with overdrive. (The same conclusion follows from \\(g_m=\\sqrt{2\\mu C_{\\rm ox}(W/L)I_D}\\) once it is recognized that \\(I_D\\) itself grows as \\(V_{\\rm ov}^2\\).)\n\nThe inverse dependence \\(g_m=2I_D/V_{\\rm ov}\\) appears only when current is held constant while \\(W/L\\) is changed; that is a different experiment from simply raising the overdrive of a given MOSFET. Secondary effects (mobility degradation, velocity saturation) can eventually flatten or weakly reduce \\(g_m\\), but they do not reverse the first-order result that Student A states.\n\nFinal answer: Student A",
        "format": "markdown",
        "sha256": "383dfad55e54aec00208ac7746b00cd0d4eb91df37227755e54c8f102d28a349"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size: increasing overdrive raises drain current and gm linearly in the square-law model. It also correctly limits Student B’s inverse relation to fixed-current sizing.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1273,
        "output_tokens": 4326,
        "total_tokens": 5599,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4114,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1273,
        "output_tokens": 4326,
        "total_tokens": 5599,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4114,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two common expressions for MOSFET transconductance in saturation appear to contradict each other:\n\n\\[\ng_m=\\mu C_{\\rm ox}\\frac{W}{L}V_{\\rm ov},\\qquad g_m=\\frac{2I_D}{V_{\\rm ov}}.\n\\]\n\nBoth are valid, but they hold different quantities fixed. With device dimensions held constant, raising the overdrive (by raising \\(V_{GS}\\)) directly raises \\(g_m\\). With bias current held constant, raising the overdrive requires a reduction in \\(W/L\\) and therefore lowers \\(g_m\\).\n\nThus each student is correct under one of the two constraints; neither statement is universally true.\n\nFinal answer: both (depends on fixed \\(W/L\\) vs \\(I_D\\))",
        "format": "markdown",
        "sha256": "fd8144cda0779ff4a65276bd8bb8e7b02aceadeecd29593bb37354d39c68741b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that for a fixed device size, increasing overdrive increases gm, while at fixed current gm decreases if overdrive is raised by reducing W/L. The conditional “both” conclusion is appropriately qualified.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1273,
        "output_tokens": 5290,
        "total_tokens": 6563,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5123,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1273,
        "output_tokens": 5290,
        "total_tokens": 6563,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5123,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The MOSFET saturation current obeys \\(I_D\\propto V_{ov}^2\\). Differentiating with respect to gate voltage immediately produces the two equivalent expressions\n\\[\ng_m=\\mu C_{ox}\\frac{W}{L}V_{ov}=\\frac{2I_D}{V_{ov}}.\n\\]\n\n- When device dimensions are held fixed and \\(V_{GS}\\) (hence \\(V_{ov}\\)) is raised, the first expression shows that \\(g_m\\) rises linearly. Student A is therefore correct.\n- When bias current is held fixed and \\(V_{ov}\\) is raised by reducing \\(W/L\\), the second expression shows that \\(g_m\\) falls. Student B is therefore correct.\n\nBoth statements are true; which one applies depends on the quantity that is kept constant.\n\nFinal answer: it depends (both, conditionally)",
        "format": "markdown",
        "sha256": "18af7d957f115e966d5f490ab9b5f43b5d71e36edad36345e61859b891494c57"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size and explains that Student B is right only when current is held fixed and W/L is reduced.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1273,
        "output_tokens": 2526,
        "total_tokens": 3799,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1273,
        "output_tokens": 2526,
        "total_tokens": 3799,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal models are identical. Although the large-signal polarities of \\(V_{GS}\\), \\(V_{DS}\\) and \\(I_D\\) are reversed for a PMOS device, the partial derivatives that define the small-signal parameters (\\(g_m\\), \\(g_{mb}\\), \\(r_o\\), and the various capacitances) produce exactly the same controlled-source topology and element relationships used for an NMOS device.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "1b64238cba1bca76bd0ac86b2f0a3e5a9c5c5d476d3b408cb3656e5d3884aeeb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model is the same in form as the NMOS model, with polarity conventions reversed.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1263,
        "output_tokens": 735,
        "total_tokens": 1998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1263,
        "output_tokens": 735,
        "total_tokens": 1998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The basic low-frequency small-signal (hybrid-\\(\\pi\\)) model of a MOSFET consists of a voltage-controlled current source \\(g_m v_{gs}\\) in parallel with the output resistance \\(r_o\\).  \n\nBecause all small-signal quantities are defined as incremental deviations from the DC bias point, the same controlled-source topology and the same parameter definitions (\\(g_m>0\\), \\(r_o>0\\)) apply to both device polarities. Consequently the small-signal model of a PMOS transistor is identical to that of an NMOS transistor (body effect, capacitances, etc., may be added in exactly the same way for either device).\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "910e8f2cbe1afe83bd6c8e22e3351b0c34e549ebf3f3371568b385e06a13d2e7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model is the same in form as the NMOS model; sign-convention details are not required for full credit.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1263,
        "output_tokens": 843,
        "total_tokens": 2106,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 698,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1263,
        "output_tokens": 843,
        "total_tokens": 2106,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 698,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal (hybrid-\\(\\pi\\)) model of a MOSFET is obtained by linearizing the large-signal device equations about a bias point and retaining only the first-order terms. Because those partial derivatives are taken with respect to the port voltages defined in the usual way (\\(v_{gs}\\), \\(v_{ds}\\), \\ldots), the resulting controlled sources and conductances have exactly the same topology and the same algebraic signs for both an NMOS and a PMOS transistor. Consequently the two small-signal models are identical; only the numerical values of the parameters (\\(g_m\\), \\(g_{mb}\\), \\(r_o\\), capacitances, \\ldots) differ because of differences in mobility, threshold, and bias current.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "b97178b0e98f7d8bfe3500332ccfeae72c695e87458c96517ccbb6a1607e1757"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly answers yes: the PMOS small-signal model has the same form as the NMOS model. The golden solution grants full credit for this conclusion; the sign-convention detail is not essential.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1263,
        "output_tokens": 908,
        "total_tokens": 2171,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 751,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1263,
        "output_tokens": 908,
        "total_tokens": 2171,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 751,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit places a junction diode in series with a diode-connected enhancement NMOS whose source is grounded. Positive \\(I_X\\) can flow only when the diode is forward-biased and the MOSFET is on.\n\nUnder the constant-voltage-drop model the diode contributes a fixed drop of approximately \\(0.7\\,\\mathrm{V}\\). The MOSFET remains cut off until its gate-source voltage reaches \\(V_t\\) and thereafter obeys the square law while in saturation (the connection \\(V_{DS}=V_{GS}\\) guarantees saturation). Consequently\n\n\\[\nI_X=\n\\begin{cases}\n0 & V_X\\le V_t+0.7\\,\\mathrm{V},\\\\[1mm]\n\\frac12k_n(V_X-V_t-0.7\\,\\mathrm{V})^2 & V_X>V_t+0.7\\,\\mathrm{V}.\n\\end{cases}\n\\]\n\n(The same qualitative shape is obtained with the exponential diode law; the transition is simply smoother.)\n\nThus the sketch of \\(I_X\\) versus \\(V_X\\) lies on the voltage axis until \\(V_X=V_t+0.7\\,\\mathrm{V}\\) and thereafter rises parabolically.\n\nFinal answer: \\(I_X=0\\) (\\(V_X\\le V_t+0.7\\)); \\(\\frac12 k_n(V_X-V_t-0.7)^2\\) (above)",
        "format": "markdown",
        "sha256": "2fa93990f9c0751aae23a83adeb8875d7d0515fd25b1a4ea16af074ad8324fed"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer correctly recognizes the diode-connected NMOS behavior and predicts a quadratic rise, but invents a series junction diode and therefore gives the wrong turn-on voltage. The actual current is approximately zero up to VTH, then rises quadratically.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2283,
        "output_tokens": 8232,
        "total_tokens": 10515,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7924,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2283,
        "output_tokens": 8232,
        "total_tokens": 10515,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7924,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a pn-junction diode in series with a diode-connected NMOS device (gate-drain shorted, source grounded). The diode orientation places its anode on the side of \\(V_X\\).\n\nUnder the constant-voltage-drop model the diode, when forward-biased, drops a roughly fixed voltage \\(V_{D,\\rm on}\\approx 0.7\\,\\rm V\\). The MOSFET obeys the square-law model and, because \\(V_{DS}=V_{GS}\\), remains in saturation whenever it is on. Consequently:\n\n- both devices are off and \\(I_X=0\\) for all \\(V_X\\le V_t+V_{D,\\rm on}\\);\n- for \\(V_X>V_t+V_{D,\\rm on}\\) one has \\(V_{GS}=V_X-V_{D,\\rm on}\\) and\n  \\[\n  I_X=\\frac12\\mu_nC_{\\rm ox}\\frac{W}{L}(V_X-V_{D,\\rm on}-V_t)^2.\n  \\]\n\n(The same qualitative shape—an abrupt threshold followed by a quadratic rise—is obtained if the exponential diode law is retained; only the precise location of the knee changes.) Reverse breakdown is ignored, so \\(I_X\\) stays zero for negative \\(V_X\\).\n\nThus the sketch is identically zero up to a positive cut-in voltage of order \\(1\\,\\rm V\\) and thereafter follows an upward-opening parabola.\n\nFinal answer: \\(I_X=0\\) (\\(V_X\\le V_t+0.7\\)); \\(\\frac12 k_n(V_X-0.7-V_t)^2\\) (else)",
        "format": "markdown",
        "sha256": "e7bbae9e6452df898e56d60ecd68dd97f6b33afd6ed2eece851baba46e973ac6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recognizes the diode-connected NMOS and its saturation square-law behavior, but invents a series pn diode, shifting the knee from VTH to VTH + 0.7 V. This misreads the circuit and gives the wrong I_X–V_X characteristic.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2283,
        "output_tokens": 11185,
        "total_tokens": 13468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10815,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2283,
        "output_tokens": 11185,
        "total_tokens": 13468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10815,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a series pn-junction diode and a diode-connected NMOS, so \\(I_X\\) is unidirectional. With the constant-voltage diode model (\\(V_D\\approx0.7\\,\\mathrm{V}\\)) and the square-law MOSFET model,\n\n\\[\nI_X=\n\\begin{cases}\n0 & V_X<V_t+V_D,\\\\[4pt]\n\\frac12\\mu_nC_{\\mathrm{ox}}\\frac{W}{L}(V_X-V_D-V_t)^2 & V_X\\ge V_t+V_D.\n\\end{cases}\n\\]\n\nThus the sketch is identically zero for all \\(V_X\\) up to the threshold \\(V_t+0.7\\,\\mathrm{V}\\) and thereafter rises quadratically.\n\nFinal answer: \\(I_X=0\\) (\\(V_X<V_t+0.7\\)); quadratic rise after",
        "format": "markdown",
        "sha256": "078a4d0dff7e9bae483db28eabd598a1e863de1d3af85497c2c752e40dbcbcb4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly predicts a quadratic rise above turn-on, but invents a series PN diode and therefore gives the wrong onset voltage: the diode-connected NMOS turns on above VTH, not VTH + 0.7 V.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2283,
        "output_tokens": 7663,
        "total_tokens": 9946,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7463,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2283,
        "output_tokens": 7663,
        "total_tokens": 9946,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7463,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit applies a fixed \\(V_{DS}=1\\,\\mathrm{V}\\) to NMOS \\(M_1\\) while \\(V_{GS}=V_X\\) and \\(I_X=I_D\\).\n\nThus \\(I_X\\) versus \\(V_X\\) is simply the MOSFET transfer curve at that constant \\(V_{DS}\\):\n\n- \\(I_X=0\\) for \\(V_X\\le V_t\\),\n- square-law (saturation) rise for \\(V_t<V_X\\le V_t+1\\),\n- triode-region continuation (smaller slope) for \\(V_X>V_t+1\\).\n\nDevice parameters are not supplied, so only this qualitative shape can be drawn.",
        "format": "markdown",
        "sha256": "52967f010c80592dc8fec0cb9cbfc0dccd67267e6011348a705607af4da5766c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, quadratic saturation region up to V_X = V_t + 1 V, and transition to triode operation beyond it. The stated smaller-slope continuation captures the expected qualitative trend.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2419,
        "output_tokens": 4406,
        "total_tokens": 6825,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2419,
        "output_tokens": 4406,
        "total_tokens": 6825,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The drain is held at a fixed \\(1\\,\\text{V}\\) and the source is grounded, so \\(V_{DS}=1\\,\\text{V}\\) while \\(V_{GS}=V_X\\). Thus \\(I_X=I_D\\).\n\n- \\(V_X\\le V_t\\): cutoff, so \\(I_X=0\\).\n- \\(V_t<V_X\\le V_t+1\\,\\text{V}\\): saturation (\\(V_{DS}\\ge V_{GS}-V_t\\)),\n  \\[\n  I_X=\\frac12 k_n(V_X-V_t)^2.\n  \\]\n- \\(V_X>V_t+1\\,\\text{V}\\): triode,\n  \\[\n  I_X=k_n\\bigl[(V_X-V_t)(1)-\\tfrac12\\bigr].\n  \\]\n\nThe plot is therefore zero up to \\(V_t\\), then a square-law rise until \\(V_X=V_t+1\\,\\text{V}\\), after which it continues as a straight line of slope \\(k_n\\). Value and slope match at the saturation/triode boundary, so the curve is smooth there.",
        "format": "markdown",
        "sha256": "378a290f8cd721eaecac48ba16f52416db05cd814ca5c026d35b506f41cf681b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, the quadratic saturation rise up to V_X=V_t+1 V, and the roughly linear triode rise afterward. The stated expressions and smooth boundary behavior are consistent with the assumed device model.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2419,
        "output_tokens": 2075,
        "total_tokens": 4494,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2419,
        "output_tokens": 2075,
        "total_tokens": 4494,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The NMOS has its source grounded and its drain fixed at \\(1\\,\\text{V}\\), so \\(I_X\\) is simply the drain current set by \\(V_X=V_{GS}\\).\n\n- For \\(V_X<V_t\\): cutoff, so \\(I_X=0\\).\n- For \\(V_t\\le V_X\\le V_t+1\\): saturation (\\(V_{DS}=1\\ge V_{GS}-V_t\\)), so\n  \\[\n  I_X=\\tfrac12 k_n(V_X-V_t)^2\n  \\]\n  (rising parabola).\n- For \\(V_X\\ge V_t+1\\): triode, so\n  \\[\n  I_X=k_n\\!\\left[(V_X-V_t)(1)-\\tfrac12\\right]\n  \\]\n  (straight line).\n\nThe two expressions and their slopes match at \\(V_X=V_t+1\\), so the curve leaves the parabola and continues as a straight line with no kink. Qualitatively:\n\n```text\nI_X\n |            /\n |           /  triode (linear)\n |          /\n |       __/  saturation (quadratic)\n |    __/\n |___/________________________ V_X\n   0  V_t        V_t+1\n```",
        "format": "markdown",
        "sha256": "eacda3999ffc695957309a092742fd1de86ca3afe9f6ea9495ccd569e455ca56"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly shows zero current below threshold, a quadratic saturation-region rise up to V_t+1 V, and a roughly linear triode-region rise beyond it. The transition and matching slopes are also correctly described.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2419,
        "output_tokens": 3253,
        "total_tokens": 5672,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2954,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2419,
        "output_tokens": 3253,
        "total_tokens": 5672,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2954,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The MOSFET has both its gate and source grounded, so \\(V_{GS}=0\\). A standard enhancement-mode device is therefore in cutoff for any reasonable \\(V_{DS}\\) and conducts essentially zero drain current. A transistor used as a current source must instead be biased into saturation (with a fixed \\(V_{GS}>V_t\\)) so that it produces a nonzero current independent of the voltage across it. The arrangement in the figure does not satisfy that condition.\n\nFinal answer: no",
        "format": "markdown",
        "sha256": "d9f802afc7a2f91888c2db853e9c96063279e3e41602c945d624679c72566aec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misreads the connections, treating the source as grounded and the device as off at VGS=0. The drawn PMOS is diode-connected and presents low impedance, which is the reason it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1695,
        "output_tokens": 9631,
        "total_tokens": 11326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9531,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1695,
        "output_tokens": 9631,
        "total_tokens": 11326,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9531,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. With both the gate and source grounded, \\(V_{GS}=0\\). A standard enhancement-mode MOSFET is therefore held in cutoff (rather than saturation) and cannot operate as a current source.",
        "format": "markdown",
        "sha256": "3b0185db48758c1ff059d754769fbef58d0d2a693bf729bf2412cbfa1c6eaeed"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the connections: M1 is a PMOS whose top terminal is the source, while its gate and drain are grounded. It therefore is diode-connected and presents low impedance, not a grounded-source MOSFET with VGS = 0; the “no” conclusion is based on the wrong device interpretation.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1695,
        "output_tokens": 23085,
        "total_tokens": 24780,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23043,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1695,
        "output_tokens": 23085,
        "total_tokens": 24780,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23043,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a depletion-mode NMOS transistor (solid channel line) whose gate and source terminals are held at the same potential. Thus \\(V_{GS}=0\\). Because the threshold of a depletion-mode device is negative, the transistor is strongly inverted and carries a nonzero drain current.\n\nWhen the drain-to-source voltage is large enough to pinch off the channel, the device enters saturation. In that region the drain current is essentially independent of \\(V_{DS}\\) (ideally set only by device geometry and the fixed over-drive \\(0-V_t\\)) and the transistor therefore behaves as a two-terminal current source.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "fac35b14f1c75aaf899b15b2a9b62b48a9d6ede94ce33284e42372c5fa0dc5b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The device is a diode-connected PMOS, not a depletion NMOS with gate and source tied. It presents a low impedance (about 1/gm), so it cannot act as a current source; the answer reaches the opposite conclusion.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1695,
        "output_tokens": 13461,
        "total_tokens": 15156,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13325,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1695,
        "output_tokens": 13461,
        "total_tokens": 15156,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13325,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a single MOSFET stage: gate driven by \\(V_{in}\\), upper device terminal tied to \\(V_{DD}\\) through \\(R_S\\), lower terminal tied to ground through \\(R_D\\), with \\(V_{out}\\) taken at the lower terminal.\n\n## Terminals and polarity\nThe source arrow is drawn on the upper terminal and points into the channel, so \\(M_1\\) is an NMOS with:\n- source = upper terminal (through \\(R_S\\) to \\(V_{DD}\\))\n- drain = lower terminal (\\(V_{out}\\), through \\(R_D\\) to ground)\n- gate = \\(V_{in}\\)\n\nInput at the gate and output at the drain makes this nominally a common-source stage with source degeneration \\(R_S\\).\n\n## The problem with this orientation\nIn the three-terminal symbol the body is tied to the source. For an NMOS the body–drain junction is a diode with its anode at the source/body node and its cathode at the drain. Here the source sits up toward \\(V_{DD}\\) and the drain sits down toward ground, so that diode is forward biased and clamps\n\n\\[\nV_S - V_D \\approx 0.7\\,\\text{V}.\n\\]\n\nThe channel is then shunted by the diode, and the current is set by the resistors rather than by the gate:\n\n\\[\nI \\approx \\frac{V_{DD}-0.7}{R_S+R_D}, \\qquad V_{out}=I\\,R_D,\n\\]\n\nessentially independent of \\(V_{in}\\). As drawn, the circuit does not operate as a gate-controlled amplifier. An NMOS only works as a common-source amplifier with the drain as the higher-potential terminal (drain resistor up to \\(V_{DD}\\), source resistor down to ground), so the body diode stays reverse biased.\n\n## If it is meant as a working amplifier\nThe same topology functions if the device is a PMOS (source toward \\(V_{DD}\\), drain toward ground), which is the polarity consistent with the resistor labels \\(R_S\\) on top and \\(R_D\\) on the bottom. Treating it that way, in saturation with the body at the source (no body effect) and neglecting \\(r_o\\):\n\n\\[\nv_{in}=v_{gs}(1+g_m R_S), \\qquad i_d=\\frac{g_m}{1+g_m R_S}v_{in},\n\\]\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=-\\frac{g_m R_D}{1+g_m R_S}.\n\\]\n\nIt is an inverting stage; \\(R_S\\) degenerates the gain (and raises linearity and input range), and the gain approaches \\(-R_D/R_S\\) for \\(g_m R_S \\gg 1\\). With finite \\(r_o\\) the magnitude is somewhat smaller, and if the body is not at the source the denominator becomes \\(1+(g_m+g_{mb})R_S\\).\n\nFor the PMOS reading, saturation requires \\(V_{SD}\\ge V_{SG}-|V_{tp}|\\), i.e. \\(V_{out}\\le V_{in}+|V_{tp}|\\), with the bias current set implicitly by \\(I=\\tfrac12 k_p'(W/L)(V_{DD}-IR_S-V_{in}-|V_{tp}|)^2\\).",
        "format": "markdown",
        "sha256": "339332223c861f1e6741988ea70fb838a1318a5f9c9c371212f2d5c61f72b79c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives the correct PMOS gain conditionally, but explicitly misidentifies M1 as an NMOS and claims the drawn circuit is diode-clamped rather than the PMOS common-source stage. The golden solution assigns this error a score of 1.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2466,
        "output_tokens": 10799,
        "total_tokens": 13265,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10042,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2466,
        "output_tokens": 10799,
        "total_tokens": 13265,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10042,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **PMOS common-source amplifier with source degeneration**.\n\n### Identification\n- \\(M_1\\) is a **p-channel MOSFET**: the source arrow points into the channel, and the source resistor \\(R_S\\) sits on the \\(V_{DD}\\) side while the drain resistor \\(R_D\\) returns to ground.\n- Gate = input \\(V_{\\text{in}}\\)\n- Source → \\(R_S\\) → \\(V_{DD}\\)\n- Drain → \\(V_{\\text{out}}\\), with \\(R_D\\) to ground\n- The 3-terminal symbol implies the body is taken as tied to the source (no body effect), unless an IC well tie to \\(V_{DD}\\) is assumed.\n\n### Large-signal behavior\nCurrent flows \\(V_{DD}\\to R_S\\to\\) source \\(\\to\\) drain \\(\\to R_D\\to\\) ground, so\n\\[\nV_S=V_{DD}-I_DR_S,\\qquad V_D=V_{\\text{out}}=I_DR_D.\n\\]\nIn saturation,\n\\[\nI_D=\\frac12\\mu_pC_{\\text{ox}}\\frac{W}{L}\\bigl(V_{SG}-|V_{tp}|\\bigr)^2,\n\\]\nwhich requires\n\\[\nV_{SG}>|V_{tp}|\\quad\\Rightarrow\\quad V_{\\text{in}}<V_S-|V_{tp}|\n\\]\nand\n\\[\nV_{SD}\\ge V_{SG}-|V_{tp}|\\quad\\Rightarrow\\quad V_{\\text{out}}\\le V_{\\text{in}}+|V_{tp}|.\n\\]\nRaising \\(V_{\\text{in}}\\) reduces \\(V_{SG}\\), so \\(I_D\\) and \\(V_{\\text{out}}\\) both fall: the stage **inverts**.\n\n### Small-signal gain\nWith \\(g_m=\\partial I_D/\\partial V_{SG}\\) and neglecting \\(r_o\\) and body effect,\n\\[\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}=-\\frac{g_mR_D}{1+g_mR_S}.\n\\]\n\\(R_S\\) is unbypassed source degeneration: it lowers \\(|A_v|\\) by \\(1+g_mR_S\\) and linearizes the gain. If \\(R_S=0\\), this reduces to the ordinary CS result \\(A_v=-g_mR_D\\).\n\nIncluding channel-length modulation (\\(r_o\\)) only reduces \\(|A_v|\\) further; the ideal expression above is the usual design estimate.\n\n### Impedances\n- \\(R_{\\text{in}}\\to\\infty\\) (gate draws no current).\n- The resistance seen at the drain is high (\\(\\sim r_o(1+g_mR_S)+R_S\\)), so with \\(R_D\\) as the only load the voltage gain above is already the loaded gain.\n\n### Role of each element\n| Element | Function |\n|---|---|\n| \\(M_1\\) (PMOS) | Common-source transconductance; inverting |\n| \\(R_S\\) | Sets \\(V_S\\) and \\(I_D\\); degenerates \\(g_m\\) |\n| \\(R_D\\) | Converts drain current to \\(V_{\\text{out}}\\); sets gain and DC drain level |\n| \\(V_{DD}\\) | Positive supply; AC ground |",
        "format": "markdown",
        "sha256": "47fa68efe9ca45264fbc5fc75fced3eb781d586e030de164d5817e6c36542eec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain \\(-g_mR_D/(1+g_mR_S)\\), satisfying the full-credit rule. The body-effect assumption is secondary.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2466,
        "output_tokens": 6669,
        "total_tokens": 9135,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2466,
        "output_tokens": 6669,
        "total_tokens": 9135,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows an NMOS stage, but it is wired with the wrong supply polarity, so it has no valid amplifying bias point.\n\n## What is drawn\n- \\(M_1\\) is an NMOS: the arrow points into the channel, and it is placed on the upper terminal, marking that terminal as the source.\n- Source (top) returns to \\(V_{DD}\\) through \\(R_S\\); gate is driven by \\(V_{in}\\); drain (bottom) is the \\(V_{out}\\) node and returns to ground through \\(R_D\\).\n\n## Why it cannot bias as an amplifier\nAn NMOS passes conventional current from drain to source, which here would mean current flowing upward — in the ground-side drain node, out the source, and on toward \\(V_{DD}\\). The resistors cannot support that: \\(R_S\\) ties to the highest potential and \\(R_D\\) to the lowest, so they only pass current downward, from \\(V_{DD}\\) to ground. The two requirements contradict, so no drain current can flow and there is no forward-active operating point.\n\nInstead the source node is pulled up toward \\(V_{DD}\\) and the drain node down toward ground, leaving the channel strongly reverse-biased. The body–drain junction (body tied to the source) then becomes forward biased and conducts, so the current that does flow is parasitic diode current, not gate-controlled channel current. \\(V_{out}\\) is therefore set by diode conduction, not by \\(V_{in}\\).\n\nNote that this supply arrangement — source toward \\(V_{DD}\\), drain toward ground — is exactly right for a PMOS, whose current flows source to drain (downward). The drawing pairs an NMOS symbol with a PMOS bias topology.\n\n## If the polarity is corrected\nWith a PMOS, or with the NMOS source moved to the ground side, this is a common-source stage with source degeneration \\(R_S\\). Neglecting \\(r_o\\):\n\n\\[\nA_v=\\frac{V_{out}}{V_{in}}=-\\frac{g_m R_D}{1+g_m R_S}\n\\]\n\n- Inverting, with \\(R_S\\) lowering and linearizing the gain.\n- For \\(g_m R_S\\gg 1\\), \\(A_v\\approx -R_D/R_S\\), set by the resistor ratio and largely independent of \\(g_m\\).\n- Input resistance is essentially infinite (gate current is zero).\n- Output resistance is \\(R_D\\) in parallel with the boosted resistance seen at the drain, \\(\\approx r_o(1+g_m R_S)\\); including \\(r_o\\) also reduces \\(|A_v|\\) slightly from the expression above.",
        "format": "markdown",
        "sha256": "b41e07989f3dffc204e0abf6b1f15e2a4349c35accbb7ddf95ec6ff3998a1b52"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives the correct gain only conditionally, but misidentifies M1 as NMOS and claims the shown circuit cannot amplify. The figure is a PMOS common-source stage with source degeneration; the golden solution explicitly assigns this combination a score of 1.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2466,
        "output_tokens": 10330,
        "total_tokens": 12796,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9741,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2466,
        "output_tokens": 10330,
        "total_tokens": 12796,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9741,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source follower (common-drain stage).\n\n**Topology**\n- \\(M_1\\) is an NMOS device: drain at \\(V_{DD}\\), gate driven by \\(V_{in}\\), source tied to \\(R_S\\) and to ground.\n- \\(V_{out}\\) is taken at the source, so the drain is AC-common and the stage is common-drain.\n\n**Large-signal behavior**\n- \\(V_{GS}=V_{in}-V_{out}\\), and \\(I_D=V_{out}/R_S\\).\n- In saturation,\n  \\[\n  \\frac{V_{out}}{R_S}=\\frac12 k_n(V_{in}-V_{out}-V_t)^2.\n  \\]\n- Thus \\(V_{out}\\) follows \\(V_{in}\\) with a downward level shift of about \\(V_{GS}\\).\n- Saturation holds while \\(V_{DD}\\ge V_{in}-V_t\\), which is the normal bias region for this connection.\n\n**Small-signal properties**\n- Voltage gain (ignoring \\(r_o\\)):\n  \\[\n  A_v=\\frac{g_m R_S}{1+g_m R_S}<1,\n  \\]\n  approaching unity for large \\(g_m R_S\\). The gain is non-inverting.\n- Input resistance is essentially infinite (gate).\n- Resistance at the output node is \\(R_S\\parallel(1/g_m)\\), so the stage has a low output impedance.\n\n**Role**\nIt is a voltage buffer: high input impedance, low output impedance, and near-unity non-inverting gain, at the cost of a \\(V_{GS}\\) level shift and no voltage amplification. If the body is tied to ground rather than to the source, body effect raises \\(V_t\\) and slightly reduces \\(A_v\\).",
        "format": "markdown",
        "sha256": "9487e8a75f0ad61d80b5e6f31f4c5a9a2e27d3d57cbfa14b27ed19d95b883202"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain \\(g_mR_S/(1+g_mR_S)\\). The additional output-resistance and body-effect discussion is consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2235,
        "output_tokens": 1897,
        "total_tokens": 4132,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1483,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2235,
        "output_tokens": 1897,
        "total_tokens": 4132,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1483,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS **source follower** (common-drain stage).\n\n## Topology\n- \\(M_1\\) is an n-channel MOSFET.\n- Gate is the input \\(V_{\\text{in}}\\).\n- Drain is tied to \\(V_{DD}\\) (AC ground).\n- Source drives \\(R_S\\) to ground, and \\(V_{\\text{out}}\\) is taken at the source.\n\nThe drain is common to the small-signal input and output ports, so the stage is common-drain. It is non-inverting.\n\n## Large-signal behavior\nGate current is zero, so the DC source current is set only by the resistor:\n\n\\[\nI_D = \\frac{V_{\\text{out}}}{R_S}\n\\]\n\nand\n\n\\[\nV_{\\text{out}} = V_{\\text{in}} - V_{GS}.\n\\]\n\n\\(V_{GS}\\) is a few hundred millivolts to about a volt above \\(V_t\\) and varies only weakly with current, so \\(V_{\\text{out}}\\) tracks \\(V_{\\text{in}}\\) with a nearly constant offset \\(V_{GS}\\).\n\nFor saturation (the useful region):\n\n\\[\nV_{DS} \\ge V_{GS}-V_t \\quad\\Rightarrow\\quad V_{DD} \\ge V_{\\text{in}}-V_t.\n\\]\n\nThat is usually easy to meet. The useful input range is roughly \\(V_t < V_{\\text{in}} < V_{DD}+V_t\\), with \\(V_{\\text{out}}\\) between 0 and \\(V_{DD}\\). If \\(V_{\\text{in}}\\) is too low, \\(M_1\\) is off and \\(V_{\\text{out}}=0\\).\n\n## Small-signal model\nWith the body tied to the source (typical discrete MOSFET) and \\(r_o\\) neglected:\n\n\\[\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_S}{1+g_m R_S} < 1\n\\]\n\n\\[\nR_{\\text{in}} \\to \\infty, \\qquad R_{\\text{out}} = \\frac{1}{g_m}\\parallel R_S \\approx \\frac{1}{g_m}.\n\\]\n\nIf \\(g_m R_S \\gg 1\\), the gain is very close to 1. Including channel-length modulation,\n\n\\[\nR_{\\text{out}} = \\frac{1}{g_m}\\parallel R_S\\parallel r_o.\n\\]\n\nIf the body is tied to ground instead of the source (common on an IC), body effect adds \\(g_{mb}\\):\n\n\\[\nA_v = \\frac{g_m R_S}{1+(g_m+g_{mb})R_S}, \\qquad R_{\\text{out}}\\approx \\frac{1}{g_m+g_{mb}}.\n\\]\n\nGain is then a bit lower, often about 0.8–0.9 rather than nearly 1.\n\n## Role\nIt is a voltage buffer: very high input impedance, low output impedance, gain slightly below unity, no phase inversion. It isolates a high-impedance source from a heavier load and can source current into \\(R_S\\) (and any load at \\(V_{\\text{out}}\\)), but it cannot sink current except through \\(R_S\\).",
        "format": "markdown",
        "sha256": "0d4d2b88d8f36fcd8329f25a6ce1d51c4e1beef8ea40f56dc002813dcae0276e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, gm·RS/(1+gm·RS). The additional discussion is supplementary.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2235,
        "output_tokens": 2087,
        "total_tokens": 4322,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1349,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2235,
        "output_tokens": 2087,
        "total_tokens": 4322,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1349,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source follower (common-drain stage) with a resistive source load.\n\n## Topology\n\n- \\(M_1\\) is an NMOS transistor: gate driven by \\(V_{\\text{in}}\\), drain tied to \\(V_{DD}\\), source tied to \\(R_S\\) and to \\(V_{\\text{out}}\\).\n- \\(R_S\\) returns the source to ground and sets the bias current.\n- The output is taken at the source, so the drain is the common (AC-grounded) terminal.\n\nThe drawn symbol has no separate body lead, so the usual discrete-device assumption applies: body is tied to the source and there is no body effect. (If this were an on-chip device with the body at ground, the body effect noted below would apply.)\n\n## Large-signal behavior\n\n\\(M_1\\) conducts only for \\(V_{\\text{in}} > V_t\\). With the device on,\n\n\\[\nV_{GS}=V_{\\text{in}}-V_{\\text{out}},\\qquad I_D=\\frac{V_{\\text{out}}}{R_S}.\n\\]\n\nUsing the square law \\(I_D=\\frac12\\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_t)^2\\),\n\n\\[\n\\frac{V_{\\text{out}}}{R_S}=K\\,(V_{\\text{in}}-V_{\\text{out}}-V_t)^2,\n\\quad K=\\tfrac12\\mu_n C_{ox}\\tfrac{W}{L}.\n\\]\n\nSo \\(V_{\\text{out}}\\) tracks \\(V_{\\text{in}}\\) with a downward level shift of one \\(V_{GS}\\):\n\n\\[\nV_{\\text{out}}=V_{\\text{in}}-V_{GS}=V_{\\text{in}}-V_t-V_{OV}.\n\\]\n\nSaturation holds over normal bias. \\(V_{DS}=V_{DD}-V_{\\text{out}}\\) and \\(V_{OV}=V_{\\text{in}}-V_{\\text{out}}-V_t\\), so \\(V_{DS}>V_{OV}\\) reduces to \\(V_{DD}>V_{\\text{in}}-V_t\\), which is satisfied for \\(V_{\\text{in}}\\le V_{DD}\\).\n\nLimits on the swing:\n\n- \\(V_{\\text{in}}<V_t\\): \\(M_1\\) off, \\(V_{\\text{out}}=0\\).\n- As \\(V_{\\text{in}}\\) rises, \\(V_{\\text{out}}\\) rises but always stays at least \\(V_t+V_{OV}\\) below \\(V_{\\text{in}}\\), and well below \\(V_{DD}\\).\n- Pull-up is active (through \\(M_1\\)); pull-down is passive, through \\(R_S\\) only.\n\n## Small-signal parameters\n\nBias at \\(I_D=V_{\\text{out}}/R_S\\), with \\(g_m=\\sqrt{2K\\,I_D}=2I_D/V_{OV}\\).\n\n| Quantity | Result (body at source) |\n|---|---|\n| Voltage gain | \\(\\displaystyle A_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}=\\frac{g_m R_S}{1+g_m R_S}<1\\) |\n| Input resistance | \\(R_{\\text{in}}=\\infty\\) (gate) |\n| Output resistance | \\(\\displaystyle R_{\\text{out}}=R_S\\parallel\\frac{1}{g_m}\\) |\n\n\\(A_v\\) approaches 1 only for \\(g_m R_S\\gg 1\\); a finite \\(R_S\\) always leaves the gain a little below unity. If instead the body is grounded, replace \\(g_m\\) by \\(g_m+g_{mb}\\) in both expressions:\n\n\\[\nA_v=\\frac{g_m R_S}{1+(g_m+g_{mb})R_S},\\qquad R_{\\text{out}}=R_S\\parallel\\frac{1}{g_m+g_{mb}}.\n\\]\n\n## Role\n\nIt is a voltage buffer: very high input impedance, low output impedance, and a gain slightly under one, at the cost of a \\(V_{GS}\\) level shift and an asymmetric (resistive) pull-down.",
        "format": "markdown",
        "sha256": "1ad7b3a7ac8088f816c4b8353d494b0110941755852cdd375571384b17c16079"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, less-than-unity gain \\(g_mR_S/(1+g_mR_S)\\). The output-resistance result and body-effect refinement are also consistent; the body-connection assumption does not affect the essential answer.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2235,
        "output_tokens": 3423,
        "total_tokens": 5658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2485,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2235,
        "output_tokens": 3423,
        "total_tokens": 5658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2485,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows an NMOS transistor \\(M_1\\) used as a **common-gate stage with a resistive load**: the gate is tied to the supply \\(V_{DD}\\), the input drives the source, and the output is taken at the drain, which is pulled up to \\(V_{DD}\\) by \\(R_D\\).\n\n## Connections\n\n- Gate of \\(M_1\\): fixed at \\(V_{DD}\\)\n- Source of \\(M_1\\): \\(V_{in}\\) (this node must be able to sink current)\n- Drain of \\(M_1\\): \\(V_{out}\\), with \\(R_D\\) from \\(V_{out}\\) to \\(V_{DD}\\)\n- The three-terminal symbol implies the body is tied to the source, so there is no body effect.\n\n## Large-signal behavior\n\nThe device conducts only when \\(V_{GS}>V_t\\):\n\n\\[\nV_{GS}=V_{DD}-V_{in}>V_t \\quad\\Rightarrow\\quad V_{in}<V_{DD}-V_t\n\\]\n\n- **Cutoff** (\\(V_{in}\\ge V_{DD}-V_t\\)): no channel current, so \\(R_D\\) pulls the output all the way up and \\(V_{out}=V_{DD}\\).\n- **On** (\\(V_{in}<V_{DD}-V_t\\)): current flows \\(V_{DD}\\to R_D\\to\\) drain \\(\\to\\) source \\(\\to V_{in}\\), and\n\n\\[\nV_{out}=V_{DD}-I_D R_D .\n\\]\n\nThe region boundary is \\(V_{DS}=V_{GS}-V_t\\), i.e. \\(V_{out}=V_{DD}-V_t\\):\n\n- **Saturation** (\\(V_{out}\\ge V_{DD}-V_t\\)):\n\n\\[\nI_D=\\tfrac12\\mu_n C_{ox}\\tfrac{W}{L}(V_{DD}-V_{in}-V_t)^2\n\\]\n\n- **Triode** (\\(V_{out}<V_{DD}-V_t\\)):\n\n\\[\nI_D=\\mu_n C_{ox}\\tfrac{W}{L}\\!\\left[(V_{DD}-V_{in}-V_t)(V_{out}-V_{in})-\\tfrac12(V_{out}-V_{in})^2\\right]\n\\]\n\nBecause \\(I_D\\) depends on \\(V_{out}\\) in triode, that case must be solved self-consistently with \\(V_{out}=V_{DD}-I_D R_D\\).\n\n## Transfer characteristic\n\n\\(V_{out}\\) stays at \\(V_{DD}\\) until \\(V_{in}\\) falls below \\(V_{DD}-V_t\\); further reduction of \\(V_{in}\\) increases the overdrive, increases \\(I_D\\), and pulls \\(V_{out}\\) down. The behavior is **non-inverting**: a high input gives \\(V_{out}=V_{DD}\\), and a low input gives a low output set by the divider between \\(R_D\\) and the channel resistance (with the source near ground, a wide device can pull \\(V_{out}\\) close to \\(V_{in}\\)).\n\n## Small-signal view\n\nIf the source is biased at a quiescent current (so \\(M_1\\) sits in saturation), the stage is a classic common-gate amplifier: non-inverting gain of about \\(g_m R_D\\), low input resistance \\(\\approx 1/g_m\\) looking into the source, and output resistance \\(\\approx R_D\\). As drawn, though, there is no bias current source — \\(V_{in}\\) sets the operating point directly — so the large-signal description above is the primary one.",
        "format": "markdown",
        "sha256": "fbd9c860f687960254459d219d414fc6574056f009452cb33990e3be8f50e97b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology and source input, and gives the correct non-inverting gain and approximately 1/gm input resistance. The additional large-signal discussion is consistent with the circuit and does not undermine the essential analysis.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2208,
        "output_tokens": 3878,
        "total_tokens": 6086,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3068,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2208,
        "output_tokens": 3878,
        "total_tokens": 6086,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3068,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-gate stage: \\(M_1\\) is an NMOS whose gate is tied to \\(V_{DD}\\) (AC ground), whose source is driven by \\(V_{in}\\), and whose drain is the output, loaded by \\(R_D\\) to \\(V_{DD}\\). The symbol shows the body tied to the source, so \\(V_{SB}=0\\) and there is no body effect. The source terminal sinks the drain current, so whatever drives \\(V_{in}\\) must sink \\(I_D\\).\n\nWith \\(V_G=V_{DD}\\) and \\(V_S=V_{in}\\),\n\\[\nV_{GS}=V_{DD}-V_{in},\\qquad V_{OV}=V_{DD}-V_t-V_{in}.\n\\]\nUsing \\(k_n=\\mu_n C_{ox}(W/L)\\) and neglecting channel-length modulation:\n\n**Cutoff** — \\(V_{in}\\ge V_{DD}-V_t\\) (i.e. \\(V_{GS}\\le V_t\\)): \\(I_D=0\\), so \\(V_{out}=V_{DD}\\).\n\n**Saturation** — \\(V_{DD}-V_t-\\Delta\\le V_{in}\\le V_{DD}-V_t\\), where \\(\\Delta=\\sqrt{2V_t/(k_n R_D)}\\):\n\\[\nI_D=\\tfrac12 k_n(V_{DD}-V_t-V_{in})^2,\\qquad V_{out}=V_{DD}-\\tfrac12 k_n R_D(V_{DD}-V_t-V_{in})^2.\n\\]\nThis region ends at the edge \\(V_{out}=V_{DD}-V_t\\) (equivalently \\(I_D=V_t/R_D\\)), which is exactly \\(V_{in}=V_{DD}-V_t-\\Delta\\).\n\n**Triode** — \\(V_{in}\\le V_{DD}-V_t-\\Delta\\): with \\(V_{DS}=V_{out}-V_{in}\\) and \\(V_{OV}=V_{DD}-V_t-V_{in}\\),\n\\[\nV_{DS}=\\frac{1+k_n R_D V_{OV}-\\sqrt{1-2k_n R_D V_t+(k_n R_D V_{OV})^2}}{k_n R_D},\\qquad V_{out}=V_{in}+V_{DS}.\n\\]\nAs \\(V_{in}\\) falls, \\(V_{DS}\\) approaches the constant \\(1/(k_n R_D)\\), so \\(V_{out}\\approx V_{in}+1/(k_n R_D)\\): the output follows the input with a fixed offset.\n\n**Small signal.** In saturation the stage is a common-gate amplifier with\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=g_m R_D=k_n(V_{DD}-V_t-V_{in})R_D>0\n\\]\n(non-inverting). The gain is bias-dependent and falls toward \\(1\\) as the device is driven deep into triode. The input resistance seen at the source is \\(\\approx 1/g_m\\).",
        "format": "markdown",
        "sha256": "97c0de3c33c58862868eaa770b7d57f7b6fb3f208299d201beeb945521cf32fc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the source-driven common-gate stage and gives the positive gain and approximate input resistance. The extra ideal-model region analysis is mostly consistent, but the claim that gain falls toward unity in triode is not unconditional: it can approach unity from below, depending on the bias and parameters.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2208,
        "output_tokens": 9766,
        "total_tokens": 11974,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9054,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2208,
        "output_tokens": 9766,
        "total_tokens": 11974,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9054,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows an NMOS common-gate stage with a resistive load. M1 has its gate tied directly to \\(V_{DD}\\), its source driven by \\(V_{in}\\), and its drain at \\(V_{out}\\), with \\(R_D\\) from the drain up to \\(V_{DD}\\).\n\n## Why it is a common-gate stage\nThe gate sits at a fixed DC voltage, so it is an AC ground. The signal enters at the source and is taken out at the drain — the definition of the common-gate configuration. Because \\(V_{DD}\\) is the most positive available bias, the device can only conduct when the source is pulled sufficiently below it.\n\n## Large-signal behavior\n\\[\nV_{GS}=V_{DD}-V_{in}\n\\]\nso M1 is cut off for \\(V_{in}\\ge V_{DD}-V_t\\) and on below that. (\\(V_t\\) is evaluated at the actual \\(V_{SB}\\) if the body is not tied to the source.)\n\n- **Cutoff** (\\(V_{in}\\ge V_{DD}-V_t\\)): \\(I_D=0\\), and \\(R_D\\) pulls the output up to \\(V_{out}=V_{DD}\\).\n- **On** (\\(V_{in}<V_{DD}-V_t\\)): current flows \\(V_{DD}\\to R_D\\to\\) drain \\(\\to\\) source and is sunk by the input source, with\n\\[\nI_D=\\frac{V_{DD}-V_{out}}{R_D}.\n\\]\n\nThe saturation/triode boundary is \\(V_{out}=V_{DD}-V_t\\), i.e. \\(I_DR_D=V_t\\). Just at turn-on the overdrive is small and M1 is in saturation (\\(k_n=\\mu_nC_{ox}W/L\\), ignoring \\(\\lambda\\)):\n\\[\nI_D=\\tfrac12 k_n(V_{DD}-V_{in}-V_t)^2,\\qquad V_{out}=V_{DD}-\\tfrac12 k_nR_D(V_{DD}-V_{in}-V_t)^2.\n\\]\nAs \\(V_{in}\\) falls further, \\(I_D\\) grows, \\(V_{DS}=V_{out}-V_{in}\\) shrinks, and M1 enters triode:\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}=k_n\\!\\left[(V_{DD}-V_{in}-V_t)(V_{out}-V_{in})-\\tfrac12(V_{out}-V_{in})^2\\right].\n\\]\nDeep in triode the channel is just a small resistance and \\(V_{out}\\) is pulled down close to \\(V_{in}\\).\n\nThe transfer is non-inverting: a lower \\(V_{in}\\) gives a larger \\(V_{GS}\\), more current, and a lower \\(V_{out}\\).\n\n## Small-signal behavior (biased in saturation)\nWith the gate at AC ground and the body taken as AC ground, \\(v_{gs}=v_{bs}=-v_{in}\\), so both transconductances act. Driving the source with an ideal voltage source:\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=\\left(g_m+g_{mb}+\\frac{1}{r_o}\\right)(R_D\\parallel r_o)\\approx(g_m+g_{mb})R_D,\n\\]\nwhich is positive, as expected for a common-gate stage. The input must sink the signal current, so the input resistance is low:\n\\[\nR_{in}\\approx\\frac{1}{g_m+g_{mb}},\n\\]\nwhile with the input AC-shorted the output resistance is \\(R_{out}=R_D\\parallel r_o\\). If the body is instead shorted to the source, set \\(g_{mb}=0\\) and hold \\(V_t\\) constant.\n\n## Things to watch\n- The input range is capped at \\(V_{DD}-V_t\\); above that the device is off and the gain collapses to zero.\n- The stage loads its driver heavily, since the source must sink all of \\(I_D\\).\n- In a standard CMOS process the p-substrate is grounded, so raising \\(V_{in}\\) increases \\(V_{SB}\\) and hence \\(V_t\\) (body effect), shifting the turn-on point and contributing the \\(g_{mb}\\) term above.",
        "format": "markdown",
        "sha256": "64d8bab319e80be56966e79b4da0bb899fab8649f9f32769b63db88d06b842a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate stage, its positive gain, and low input resistance. The finite-ro and body-effect refinements are consistent, and the additional large-signal analysis does not conflict with the essential result.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2208,
        "output_tokens": 10772,
        "total_tokens": 12980,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2208,
        "output_tokens": 10772,
        "total_tokens": 12980,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit as drawn has no small-signal gain from \\(V_\\text{in}\\) to \\(V_\\text{out}\\). The source of \\(M_1\\) is hard-wired to ground, so \\(C_1\\) only couples \\(V_\\text{in}\\) into an AC short.\n\n### Topology\n- \\(M_1\\) is an NMOS (source arrow into the channel). Drain is the top terminal, source the bottom.\n- Drain load \\(R_D\\) to \\(V_{DD}\\); \\(V_\\text{out}\\) is the drain node.\n- Gate is held at a DC bias \\(V_b\\).\n- Source node is tied directly to ground and also to the right-hand plate of \\(C_1\\).\n\n### DC operating point\n\\[\nV_S = 0, \\quad V_G = V_b, \\quad V_{GS} = V_b\n\\]\nIf \\(V_b > V_{th}\\), \\(M_1\\) conducts. With \\(k_n = \\mu_n C_{ox}(W/L)\\):\n\n- **Saturation** if \\(V_\\text{out} \\ge V_b - V_{th}\\):\n  \\[\n  I_D = \\tfrac12 k_n (V_b - V_{th})^2, \\qquad V_\\text{out} = V_{DD} - I_D R_D\n  \\]\n- **Triode** if \\(V_\\text{out} < V_b - V_{th}\\):\n  \\[\n  I_D = k_n\\!\\left[(V_b-V_{th})V_\\text{out} - \\tfrac12 V_\\text{out}^2\\right]\n  \\]\n  together with \\(V_\\text{out} = V_{DD} - I_D R_D\\).\n\n\\(V_\\text{in}\\) does not affect the bias: \\(C_1\\) blocks DC, and the source is already at 0 V.\n\n### Small-signal behavior\nGate and source are both AC grounds (\\(V_b\\) is a DC source; source is shorted to ground). No signal voltage appears at any terminal of \\(M_1\\), so\n\\[\nv_\\text{out} = 0, \\qquad A_v = \\frac{v_\\text{out}}{v_\\text{in}} = 0\n\\]\nSeen from \\(V_\\text{in}\\), the circuit is only \\(C_1\\) to ground:\n\\[\nZ_\\text{in}(s) = \\frac{1}{s C_1}\n\\]\n\n### What the drawing is close to\nA working **common-gate** stage would keep the gate at \\(V_b\\) (AC ground) and drive the source, but the source would be biased through a resistor or current source—not shorted to ground. With that short removed, unloaded gain is about \\(g_m R_D\\) and \\(R_\\text{in} \\approx 1/g_m\\). As drawn, the source short removes that path.",
        "format": "markdown",
        "sha256": "d388648134e8de2b8ce4bbbd50e6f249d25f60f1f82e1200f1333e756b763376"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input is shunted and the ideal small-signal gain is zero. The additional discussion does not undermine this conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2725,
        "output_tokens": 3105,
        "total_tokens": 5830,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2441,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2725,
        "output_tokens": 3105,
        "total_tokens": 5830,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2441,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS biased with a fixed gate voltage, but the input is shorted out and does not drive the transistor.\n\n### Connections\n- \\(M_1\\) is an NMOS. Its drain is the \\(V_\\text{out}\\) node, its gate is tied to the DC bias \\(V_b\\), and its source goes to ground.\n- \\(R_D\\) sits between \\(V_{DD}\\) and the drain, so \\(V_\\text{out}=V_{DD}-I_D R_D\\).\n- \\(C_1\\) couples \\(V_\\text{in}\\) to that same source node, which is already grounded.\n\n### DC bias\nWith the source at 0 V,\n\\[\nV_{GS}=V_b.\n\\]\nIf \\(V_b>V_t\\), \\(M_1\\) conducts. Neglecting channel-length modulation,\n\\[\nI_D=\\frac12\\mu_n C_{ox}\\frac{W}{L}(V_b-V_t)^2,\n\\]\nand\n\\[\nV_\\text{out}=V_{DD}-I_D R_D.\n\\]\nSaturation requires \\(V_\\text{out}>V_b-V_t\\). \\(V_b\\) alone sets the current; \\(V_\\text{in}\\) and \\(C_1\\) do not affect the bias.\n\n### Small-signal behavior\n\\(V_b\\) is a DC source, so the gate is an AC ground. The source is wired directly to ground, so it is an AC ground as well. Thus\n\\[\nv_{gs}=0\n\\]\nand the controlled source \\(g_m v_{gs}\\) produces no signal current. \\(C_1\\) only loads \\(V_\\text{in}\\) into a short; nothing from \\(V_\\text{in}\\) appears at \\(V_\\text{out}\\).\n\nThis is the skeleton of a common-gate stage (gate AC-grounded, drain as output), but a working common-gate circuit needs the source to be the signal input, biased through a resistor or current source to ground rather than shorted to ground. As drawn, the stage is a constant-current DC drop across \\(R_D\\) with no voltage gain from \\(V_\\text{in}\\) to \\(V_\\text{out}\\).",
        "format": "markdown",
        "sha256": "e3926014e548074681478c558f9b0ce9f9c638ba197f3983e56e780bf72149d4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input cannot produce a source signal and the ideal voltage gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2725,
        "output_tokens": 2547,
        "total_tokens": 5272,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2055,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2725,
        "output_tokens": 2547,
        "total_tokens": 5272,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2055,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit, as drawn, is an NMOS stage with a drain resistor, but the input is shorted out and it has no gain.\n\n## Connections\n- **M1** is an NMOS (source arrow points into the channel). Its **gate is held at a fixed bias \\(V_b\\)**, its **drain** is the \\(V_{out}\\) node, and its **source is tied directly to ground**.\n- **\\(R_D\\)** runs from \\(V_{DD}\\) to the drain, so \\(V_{out}=V_{DD}-I_D R_D\\).\n- **\\(C_1\\)** couples \\(V_{in}\\) to the source node — the same node that is hard-wired to ground.\n\n## DC bias\nWith the source at 0 and the gate at \\(V_b\\),\n\\[\nV_{GS}=V_b\n\\]\nis constant. If \\(V_b>V_{th}\\) and the device is in saturation,\n\\[\nI_D=\\tfrac12\\mu_n C_{ox}\\tfrac{W}{L}(V_b-V_{th})^2\n\\]\n(neglecting channel-length modulation), and\n\\[\nV_{out}=V_{DD}-I_D R_D,\n\\]\na fixed DC level set only by \\(V_b\\) and \\(R_D\\).\n\n## Small-signal behavior\nBecause the source node is connected straight to ground, it is an AC ground. The current through \\(C_1\\) flows directly into ground and never develops a signal voltage at the source, gate, or drain. Hence\n\\[\nv_{out}=0 \\quad\\text{for any }v_{in},\\qquad A_v=\\frac{v_{out}}{v_{in}}=0.\n\\]\nFrom the source’s point of view the input is just \\(C_1\\) terminated by a short.\n\n## What the topology is aiming at\nThe placement of \\(V_b\\) on the gate and \\(V_{out}\\) at the drain is the signature of a **common-gate** stage, where the signal should drive the source and the gate should be AC-grounded. For that to work, the source needs a bias element (resistor or current source) to ground or a negative rail, with \\(C_1\\) coupling \\(V_{in}\\) to the source *above* that element — not a direct short to ground. As drawn, the short kills the input, so the stage does not amplify.",
        "format": "markdown",
        "sha256": "2a3122a540b9b8a0156a51051f77b5cddad14bd14273662887b6ea0595d6b182"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source is hard-shorted to ground, so the input produces no source signal and the ideal small-signal voltage gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2725,
        "output_tokens": 3473,
        "total_tokens": 6198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2944,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2725,
        "output_tokens": 3473,
        "total_tokens": 6198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2944,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-source stage in which the source of \\(M_1\\) is grounded. Consequently both terminals of \\(C_{SB}\\) lie at ground and this capacitor has no effect on the small-signal dynamics.\n\nThe only dynamic node voltages are therefore the gate voltage and the drain voltage. Nodal analysis at those two nodes produces a \\(2\\times 2\\) system whose determinant is quadratic in \\(s\\). The coefficient of \\(s^2\\) equals\n\\[\nC_{GS}C_{DB}+C_{GS}C_{GD}+C_{GD}C_{DB}\\neq 0,\n\\]\nso the natural frequencies are exactly the two roots of a second-degree polynomial.\n\nHence the transfer function contains two poles.\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "95d6f4974c9565ba6e6614f00d03c29980f19c38d224ca93b4f551c8298df029"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notes that CSB is shorted because both terminals are grounded, and accounts for the remaining capacitors yielding a second-order characteristic equation and two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2922,
        "output_tokens": 19341,
        "total_tokens": 22263,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19183,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2922,
        "output_tokens": 19341,
        "total_tokens": 22263,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19183,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-source stage in which the source and body terminals are both at AC ground. Consequently \\(C_{SB}\\) has identically zero voltage across its terminals, contributes no current to any other node, and can be removed without affecting the input-output behavior.\n\nThe three remaining capacitors produce exactly one loop of capacitors. The number of independent energy-storage elements (and therefore the order of the network) is therefore \\(3-1=2\\).\n\nThe same conclusion is reached by writing the two KCL equations at the gate and drain nodes; the resulting system determinant is quadratic, confirming that \\(V_\\text{out}(s)/V_\\text{in}(s)\\) has precisely two poles.\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "ab6f0f3b2ade7d13885906292183b0d549af7d50480c85b60f58d3bf1040a3d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notes that CSB is shorted out by the grounded source and body, and that the remaining three capacitors have only two independent voltages, giving a second-order response with two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2922,
        "output_tokens": 14181,
        "total_tokens": 17103,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14028,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2922,
        "output_tokens": 14181,
        "total_tokens": 17103,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14028,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-source stage in which the source terminal of \\(M_1\\) is connected directly to ground. Consequently \\(C_{SB}\\) (explicitly drawn from the source node to ground) has zero voltage across its terminals at all times, carries no current, and can be removed without affecting any branch voltage or current. It contributes neither a state variable nor a pole.\n\nThe three remaining capacitors produce the KCL equations (in the \\(s\\)-domain) at the gate and drain nodes. The determinant of the resulting \\(2\\times 2\\) system is the quadratic\n\\[\ns^2(C_{GS}C_{DB}+C_{GS}C_{GD}+C_{GD}C_{DB})+s(\\cdots)+1/(R_SR_D).\n\\]\nThe coefficient of \\(s^2\\) is nonzero for any positive capacitances, so the natural frequencies are exactly the two roots of this quadratic. (The same count is obtained by noting that the three capacitors form a single independent loop and therefore supply only \\(3-1=2\\) independent initial conditions.)\n\nThus the transfer function \\(V_\\text{out}(s)/V_\\text{in}(s)\\) has precisely two poles.\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "17055010c8b566d0d11294973d175a94fdcf7273425c69668bba2cfc09833656"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that grounded-source C_SB has no voltage, and that the remaining capacitors yield two independent states (also supported by a quadratic determinant). The conclusion of two poles is correct.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2922,
        "output_tokens": 16106,
        "total_tokens": 19028,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15844,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2922,
        "output_tokens": 16106,
        "total_tokens": 19028,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15844,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-gate NMOS stage with negative feedback from the drain to the gate.\n\n## Topology\n\n- \\(M_1\\) is an NMOS with its body tied to the source (no body effect). The source is the input node \\(V_{in}\\), the drain is the output node \\(V_{out}\\), and \\(R_D\\) is the drain load to \\(V_{DD}\\).\n- \\(R_1\\) and \\(R_2\\) form a divider from the output to ground, and their midpoint drives the gate:\n\\[\nV_F=\\beta V_{out},\\qquad \\beta=\\frac{R_2}{R_1+R_2}\n\\]\n- So \\(V_{GS}=\\beta V_{out}-V_{in}\\).\n\n## Feedback\n\nRaising \\(V_{out}\\) raises \\(V_F\\), which increases \\(V_{GS}\\) and hence the drain current. That extra current drops more voltage across \\(R_D\\), pulling \\(V_{out}\\) back down. The feedback is therefore negative, with feedback factor \\(\\beta\\).\n\n## Region of operation\n\nWhile \\(M_1\\) is conducting (\\(V_{GS}>V_t\\)) and \\(V_{out}>V_{in}\\), it stays in saturation. The saturation requirement \\(V_{DS}\\ge V_{GS}-V_t\\) becomes\n\\[\nV_{out}-V_{in}\\ge(\\beta V_{out}-V_{in})-V_t\n\\;\\Rightarrow\\;\nV_{out}(1-\\beta)+V_t\\ge 0,\n\\]\nwhich is always true for \\(V_{out}>0\\). So the device never enters triode in normal operation; it is either cut off or saturated.\n\n## DC bias\n\nWith gate current equal to zero, KCL at the output gives the bias equation\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\\frac12 k_n(\\beta V_{out}-V_{in}-V_t)^2\n+\\frac{V_{out}}{R_1+R_2},\n\\]\nusing the square-law model \\(k_n=\\mu_n C_{ox}W/L\\). Conduction requires \\(V_{out}>(V_{in}+V_t)/\\beta\\).\n\n## Small-signal gain\n\nTreating \\(V_{DD}\\) as AC ground and ignoring \\(r_o\\), with \\(v_{gs}=\\beta v_{out}-v_{in}\\) and \\(R_L=R_D\\parallel(R_1+R_2)\\):\n\\[\n\\frac{v_{out}}{v_{in}}\n=\\frac{g_m R_L}{1+\\beta g_m R_L}.\n\\]\nThis is the non-inverting closed-loop form \\(A/(1+\\beta A)\\) with open-loop gain \\(A=g_m R_L\\). For large loop gain (\\(\\beta g_m R_L\\gg 1\\))\n\\[\n\\frac{v_{out}}{v_{in}}\\approx\\frac{1}{\\beta}=\\frac{R_1+R_2}{R_2}=1+\\frac{R_1}{R_2},\n\\]\ni.e. it behaves like a non-inverting op-amp stage whose gain is set by the divider. Including finite \\(r_o\\),\n\\[\n\\frac{v_{out}}{v_{in}}\n=\\frac{g_m+1/r_o}{1/R_L+1/r_o+\\beta g_m}.\n\\]\n\nNote the DC and small-signal results differ: the quiescent point needs a finite \\(V_{GS}=V_t+V_{ov}\\), so \\(V_{out}=(V_{in}+V_{GS})/\\beta\\), while the small-signal gain only approaches \\(1/\\beta\\) because tiny changes in \\(v_{gs}\\) suffice when \\(g_m\\) is large.",
        "format": "markdown",
        "sha256": "97c65172baf8ee4dc9f82d337b83e86ef3928852b7f5a667adbaebc38bc9032c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source as the input, the output divider as feedback to the gate, and the feedback as negative. Its closed-loop gain and large-loop-gain limit also match the golden solution; the extra bias and device-region discussion does not undermine the essential answer.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2610,
        "output_tokens": 6597,
        "total_tokens": 9207,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5735,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2610,
        "output_tokens": 6597,
        "total_tokens": 9207,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5735,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS common-gate stage with drain-to-gate resistive feedback. The signal is applied at the source (\\(V_{in}\\)), the output is taken at the drain (\\(V_{out}\\)), and the gate is biased from the output by the divider \\(R_1\\)–\\(R_2\\).\n\n## Connections\n\n- \\(R_D\\) from \\(V_{DD}\\) to the drain node; that node is \\(V_{out}\\).\n- \\(R_1\\) from the drain node to the gate node, \\(R_2\\) from the gate node to ground.\n- \\(M_1\\): drain at the \\(V_{out}\\) node, gate at the divider tap \\(V_F\\), source at \\(V_{in}\\) (arrow into the device marks the source).\n\n## Bias equations\n\nThe gate draws no current, so the divider fixes the gate voltage:\n\n\\[\nV_F = k\\,V_{out}, \\qquad k = \\frac{R_2}{R_1+R_2}.\n\\]\n\n\\[\nV_{GS} = V_F - V_{in} = k\\,V_{out} - V_{in}.\n\\]\n\nThe device conducts only for \\(k\\,V_{out} - V_{in} \\ge V_t\\).\n\nKCL at the output node (current through \\(R_D\\) splits between the divider and the MOSFET):\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D} = \\frac{V_{out}}{R_1+R_2} + I_D.\n\\]\n\n## Region of operation\n\n\\[\nV_{GD} = V_F - V_{out} = (k-1)V_{out} \\le 0 < V_t,\n\\]\n\nso whenever \\(M_1\\) is on and \\(V_{out}\\ge 0\\) it is in saturation (it cannot enter triode, because the gate is held at only a fraction of the drain voltage). Thus\n\n\\[\nI_D = \\tfrac12 k_n\\,(k\\,V_{out} - V_{in} - V_t)^2,\n\\]\n\nwhich, substituted into the KCL equation, gives the implicit large-signal transfer \\(V_{out}(V_{in})\\).\n\n## Small-signal gain\n\nWith \\(R_{eq} = R_D \\parallel (R_1+R_2)\\) and neglecting \\(r_o\\) and capacitances, KCL at the drain node gives a positive (non-inverting) gain, as expected for a common-gate stage:\n\n\\[\nA_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_{eq}}{1 + k\\, g_m R_{eq}}, \\qquad g_m = k_n(kV_{out}-V_{in}-V_t).\n\\]\n\nThe term \\(k\\,g_m R_{eq}\\) is the loop gain of the drain-to-gate feedback: if \\(V_{out}\\) rises, \\(V_F\\) rises, \\(V_{GS}\\) rises, \\(I_D\\) rises, and the extra drop across \\(R_D\\) pulls \\(V_{out}\\) back down. So the feedback is negative — it stabilizes the bias point and reduces the gain from the open-loop value \\(g_m R_{eq}\\) to the expression above. The input, being at the source, has a low impedance characteristic of the common-gate configuration.",
        "format": "markdown",
        "sha256": "25834602469f7dd218c016d6ff6558bc98b21899ae855445b5cfab6ff02f77da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative feedback, with the correct closed-loop gain. The additional bias and saturation discussion does not contradict the essential topology or gain.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2610,
        "output_tokens": 7441,
        "total_tokens": 10051,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6689,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2610,
        "output_tokens": 7441,
        "total_tokens": 10051,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6689,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-gate NMOS stage with drain-to-gate resistive feedback bias. No component values are given, so the analysis is symbolic.\n\n## Topology\n\n- \\(M_1\\) is an enhancement NMOS with the body tied to the source (discrete three-terminal device), so \\(V_{SB}=0\\) and there is no body effect.\n- \\(V_{in}\\) drives the source; \\(V_{out}\\) is taken at the drain.\n- \\(R_D\\) pulls the drain up to \\(V_{DD}\\).\n- \\(R_1\\) and \\(R_2\\) form a divider from the drain to ground, and their midpoint biases the gate:\n  \\[\n  V_F=\\beta V_{out},\\qquad \\beta=\\frac{R_2}{R_1+R_2}\n  \\]\n  (gate current is zero).\n\n## Operating region\n\n\\[\nV_{GS}=V_F-V_{in}=\\beta V_{out}-V_{in}\n\\]\n\\(M_1\\) conducts only while\n\\[\nV_{in}\\le \\beta V_{out}-V_t .\n\\]\nWhenever it is on and \\(V_{out}>0\\), it is in saturation. The gate sits at a fraction of the drain voltage, so\n\\[\nV_{DG}=(1-\\beta)V_{out}>0>-V_t ,\n\\]\nwhich is exactly the saturation condition \\(V_{DS}\\ge V_{GS}-V_t\\). Triode operation does not occur in normal biasing.\n\n## DC transfer\n\nWith \\(k_n=\\mu_n C_{ox}(W/L)\\),\n\\[\nI_D=\\frac{k_n}{2}(\\beta V_{out}-V_{in}-V_t)^2 .\n\\]\nKCL at the drain, including divider loading,\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}=I_D+\\frac{V_{out}}{R_1+R_2}.\n\\]\nSubstituting \\(I_D\\) gives a quadratic in \\(V_{out}\\) for a given \\(V_{in}\\).\n\nIf \\(V_{in}\\) is high enough to hold \\(M_1\\) off, the drain current vanishes and the output rests at the loaded divider value\n\\[\nV_{out}=V_{DD}\\frac{R_1+R_2}{R_D+R_1+R_2},\n\\]\nprovided this is consistent with \\(V_{in}>\\beta V_{out}-V_t\\).\n\nBehavior: lowering \\(V_{in}\\) raises \\(V_{GS}\\), increases \\(I_D\\), and pulls \\(V_{out}\\) down, so the active-region slope is positive. Current flows from \\(V_{DD}\\) through \\(R_D\\) and \\(M_1\\) out of the \\(V_{in}\\) terminal, so the source must be able to sink that current.\n\n## Small-signal gain\n\nIn saturation, with the body effect absent,\n\\[\ni_d=g_m(\\beta v_{out}-v_{in}).\n\\]\nKCL at the output node yields the non-inverting closed-loop gain\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=\\frac{g_m}{\\dfrac{1}{R_D}+\\dfrac{1}{R_1+R_2}+g_m\\beta}.\n\\]\nThe \\(g_m\\beta\\) term is the feedback contribution: a rise in \\(v_{out}\\) raises \\(v_F\\), which opposes the original change in \\(v_{gs}\\). The feedback is therefore negative — it lowers and stabilizes the gain and desensitizes the bias point. With the gate AC-grounded (\\(\\beta=0\\)) the expression reduces to the ordinary common-gate gain. The source still presents a low input resistance of order \\(1/g_m\\), modified by the loop.\n\n## Role of each element\n\n- \\(R_D\\): drain load; sets the available gain and the off-state output level.\n- \\(R_1,R_2\\): set the gate bias fraction \\(\\beta\\) and close a DC/negative-feedback loop around \\(M_1\\); they also load the output.\n- \\(M_1\\): common-gate device; source is the input, drain is the output, and the feedback-held gate keeps it in saturation while it conducts.",
        "format": "markdown",
        "sha256": "224fd72697a8a6001d3515bf6f31592fb6efda25aa0dcbdd8707ddca96f4253f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and gives the correct non-inverting closed-loop gain including divider loading. Extra operating-point details do not undermine the essential analysis.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2610,
        "output_tokens": 5416,
        "total_tokens": 8026,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4465,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2610,
        "output_tokens": 5416,
        "total_tokens": 8026,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4465,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows an NMOS source follower (buffer) with an NMOS current-source load.\n\n## Topology\n- **M1** (top): drain at \\(V_{DD}\\), gate driven by \\(V_{in}\\), source at \\(V_{out}\\). This is a common-drain (source-follower) connection.\n- **M2** (bottom): drain at \\(V_{out}\\), gate held at a fixed bias \\(V_b\\), source at ground. With constant \\(V_{GS}=V_b\\), it behaves as a current source that sets the bias current for M1.\n\nBoth devices are enhancement NMOS (same source-arrow direction).\n\n## DC behavior\nM2 sets the quiescent current (saturation, neglecting channel-length modulation):\n\n\\[\nI_D=\\frac12\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2(V_b-V_{th})^2\n\\]\n\nThat same current flows in M1, fixing its gate-source voltage:\n\n\\[\nV_{GS1}=V_{th1}+\\sqrt{\\frac{2I_D}{\\mu_n C_{ox}(W/L)_1}}\n\\]\n\nso the large-signal transfer is a downward level shift:\n\n\\[\nV_{out}=V_{in}-V_{GS1}\n\\]\n\n## Small-signal behavior\n- Voltage gain (slightly below unity):\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}\\approx\\frac{g_{m1}}{g_{m1}+g_{mb1}}<1\n\\]\n\n- Input resistance: essentially infinite (gate of M1).\n- Output resistance: low, \\(R_{out}\\approx 1/(g_{m1}+g_{mb1})\\), which is what makes it a good buffer.\n\nIf M1’s body is tied to its source, \\(g_{mb1}=0\\) and \\(A_v\\) is closer to 1. In an integrated process where the body sits at ground, body effect is present and both lowers the gain and makes \\(V_{GS1}\\) depend on \\(V_{out}\\).\n\n## Operating limits\n- M2 remains a good current source only while it stays saturated: \\(V_{out}\\ge V_b-V_{th}\\).\n- Maximum output is about \\(V_{DD}-V_{GS1}\\).\n- So the usable swing is bounded on both ends, and the amount of level shift is set by \\(V_b\\) and the relative sizing of M1 and M2.",
        "format": "markdown",
        "sha256": "c93747229484f37882f233b205200b373094aff0d27fa37732e8125e27b81ac6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, and gives a positive gain slightly below unity with appropriate body-effect and output-resistance discussion. Minor approximations do not affect the essential answer.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2298,
        "output_tokens": 4575,
        "total_tokens": 6873,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2298,
        "output_tokens": 4575,
        "total_tokens": 6873,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows an NMOS source follower (common-drain buffer) with an NMOS current-source bias.\n\n## Topology\n- **M1** is an NMOS whose drain is at \\(V_{DD}\\), gate is the signal \\(V_{in}\\), and source is the output node. That is the follower device.\n- **M2** is an NMOS whose gate is a DC bias \\(V_b\\), source is at ground, and drain is at the output. With \\(V_b\\) fixed it behaves as a current source that sets the bias current of M1.\n- \\(V_{DD}\\) is AC ground; \\(V_b\\) is a DC bias (AC ground).\n\nBoth devices are drawn as NMOS (source arrow pointing out of the channel, no gate bubble).\n\n## Large-signal behavior\nM2, in saturation, sets the bias current\n\n\\[\nI_D \\approx \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_b-V_{th2})^2\n\\]\n\n(ignoring channel-length modulation). That same current flows in M1, so\n\n\\[\nV_{GS1}=V_{in}-V_{out}=V_{th1}+\\sqrt{\\frac{2I_D}{\\mu_n C_{ox}(W/L)_1}}\n\\]\n\nand the output is a level-shifted copy of the input:\n\n\\[\nV_{out}=V_{in}-V_{GS1}.\n\\]\n\nThe shift \\(V_{GS1}\\) is typically several hundred millivolts and depends on \\(I_D\\), device size, and (through body effect) on \\(V_{out}\\) itself if M1’s bulk is tied to ground rather than to its source.\n\n**Saturation limits**\n- M2 stays saturated only while \\(V_{out}>V_b-V_{th2}\\).\n- M1 stays saturated only while \\(V_{DD}>V_{in}-V_{th1}\\).\n\nOutside that window the follower leaves the region where the simple level-shift relation holds.\n\n## Small-signal behavior\nWith the bulk of M1 at AC ground, body effect appears as \\(g_{mb1}\\). KCL at the output gives\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}+g_{o1}}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\\approx\\frac{g_{m1}}{g_{m1}+g_{mb1}}<1,\n\\]\n\nwhere \\(g_o=1/r_o\\). The gain is close to, but always below, unity; body effect is what pulls it down the most. If the bulk is tied to the source, \\(g_{mb1}=0\\) and the gain moves closer to 1.\n\n- **Input resistance:** essentially infinite (MOS gate).\n- **Output resistance:** low,\n\n\\[\nR_{out}\\approx\\frac{1}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\\approx\\frac{1}{g_{m1}+g_{mb1}}.\n\\]\n\nSo the stage buffers a high-impedance node and can drive a heavier load, at the cost of a DC level shift and a gain slightly under one. It does not invert.\n\n## Design notes\n- \\(V_b\\) (and \\((W/L)_2\\)) set \\(I_D\\); larger \\(I_D\\) raises \\(g_{m1}\\) and lowers \\(R_{out}\\), but increases the \\(V_{GS1}\\) drop and the minimum \\(V_{out}\\) needed to keep M2 saturated.\n- \\((W/L)_1\\) trades level shift against \\(g_m\\): a wider M1 reduces \\(V_{GS1}\\) for a given current and increases gain toward 1.\n- Body effect both reduces \\(A_v\\) and makes \\(V_{th1}\\) (hence the level shift) depend on \\(V_{out}\\). Tying M1’s bulk to its source removes that term when the process allows it.",
        "format": "markdown",
        "sha256": "1667306333caf89b6aed6ea5b5acf52ca188f1d2bef6025fef4d19d4fb2f1dc7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as its current-source load and gives the correct non-inverting, near-unity gain and body-effect interpretation. The finite-\u001b[0m r_o gain expression has a minor numerator error, but it does not change the essential conclusion covered by the full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2298,
        "output_tokens": 6007,
        "total_tokens": 8305,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5113,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2298,
        "output_tokens": 6007,
        "total_tokens": 8305,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5113,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source follower (common-drain stage) biased by a MOSFET current source.\n\n## Topology\n- **M1** is an enhancement NMOS with its drain at \\(V_{DD}\\) (AC ground), its gate driven by \\(V_{in}\\), and its source at the output node. That is the common-drain (source-follower) connection.\n- **M2** is an enhancement NMOS with its gate held at a fixed bias \\(V_b\\) and its source at ground, so it sinks an essentially constant current and acts as the active load / bias current source for M1.\n- \\(V_{out}\\) is taken at the source of M1 (drain of M2).\n\n## DC operation\nWith M2 in saturation and channel-length modulation neglected,\n\\[\nI_D=\\frac12\\mu_nC_{ox}\\!\\left(\\frac{W}{L}\\right)_2(V_b-V_{t2})^2.\n\\]\nM1 carries the same current, so its gate–source voltage is fixed by that current:\n\\[\nV_{GS1}=V_{t1}+\\sqrt{\\frac{2I_D}{\\mu_nC_{ox}(W/L)_1}},\\qquad V_{out}=V_{in}-V_{GS1}.\n\\]\nThe output therefore follows the input, shifted down by one gate–source drop \\(V_{GS1}\\).\n\nM1 remains in saturation for essentially the whole useful input range (\\(V_{in}\\le V_{DD}+V_{t1}\\)). The allowable output swing is bounded below by M2 staying saturated, \\(V_{out}\\ge V_{OV2}=V_b-V_{t2}\\), and above by the level shift when the input is at its maximum.\n\n## Small-signal behavior\nWith the body of M1 at ground (standard p-substrate), \\(V_{SB}=V_{out}\\neq0\\), so body effect matters. Unloaded,\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\\approx\\frac{g_{m1}}{g_{m1}+g_{mb1}}=\\frac{1}{1+\\chi}<1,\n\\]\ntypically about \\(0.8\\)–\\(0.9\\). The stage is non-inverting.\n\n- Input resistance: \\(R_{in}\\to\\infty\\) (gate draws no DC current).\n- Output resistance: \\(R_{out}\\approx\\dfrac{1}{g_{m1}+g_{mb1}}\\parallel r_{o1}\\parallel r_{o2}\\approx\\dfrac{1}{g_{m1}+g_{mb1}}\\), which is low.\n\nSo the circuit is a voltage buffer: unity-ish gain, very high input impedance, low output impedance, plus a downward DC level shift of \\(V_{GS1}\\). Because the gain is less than one there is no Miller multiplication of \\(C_{gd}\\), and the low source resistance gives good high-frequency drive capability. The main limitations are the gain deficit from body effect (\\(g_{mb}\\)), the restricted output swing set by the level shift and by M2’s overdrive, and the finite \\(r_o\\) of the current source, which slightly lowers \\(A_v\\) and raises \\(R_{out}\\).",
        "format": "markdown",
        "sha256": "b70f30ffa9a3f47ce7b0f610656f7838c8662b2a00e00a726ca44c928e8c627a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current-source load, with a positive gain slightly below unity. The gain and output-resistance expressions appropriately account for body effect and finite output resistance.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2298,
        "output_tokens": 4442,
        "total_tokens": 6740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3714,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2298,
        "output_tokens": 4442,
        "total_tokens": 6740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3714,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a standard CMOS inverter.\n\n- \\(M_1\\) is an NMOS device (source at ground, drain at \\(V_\\text{out}\\), gate at \\(V_\\text{in}\\)).\n- \\(M_2\\) is a PMOS device (source at \\(V_{DD}\\), drain at \\(V_\\text{out}\\), gate at \\(V_\\text{in}\\)).\n\n**Logic function.**  \n- \\(V_\\text{in}=0\\): \\(M_1\\) is cut off, \\(M_2\\) is strongly on \\(\\Rightarrow V_\\text{out}=V_{DD}\\).  \n- \\(V_\\text{in}=V_{DD}\\): \\(M_2\\) is cut off, \\(M_1\\) is strongly on \\(\\Rightarrow V_\\text{out}=0\\).  \n\nThus the circuit realizes the Boolean inversion \\(V_\\text{out}=\\overline{V_\\text{in}}\\).\n\n**Static behavior.**  \nIn either logic state one of the two transistors is off, so the only current drawn from \\(V_{DD}\\) is leakage. Static power dissipation is therefore essentially zero (the principal advantage of CMOS over NMOS or bipolar logic).\n\n**Voltage-transfer characteristic (qualitative).**  \nAs \\(V_\\text{in}\\) is swept from 0 to \\(V_{DD}\\) the output falls from \\(V_{DD}\\) to 0. Five regions appear:\n\n1. \\(M_1\\) cut-off, \\(M_2\\) linear \\(\\rightarrow V_\\text{out}=V_{DD}\\);  \n2. \\(M_1\\) saturation, \\(M_2\\) linear;  \n3. both devices saturated (high-gain transition region around the switching threshold \\(V_M\\));  \n4. \\(M_1\\) linear, \\(M_2\\) saturation;  \n5. \\(M_1\\) linear, \\(M_2\\) cut-off \\(\\rightarrow V_\\text{out}=0\\).\n\nWhen the two transistors are matched (\\(k_n=k_p\\), \\(|V_{tn}|=|V_{tp}|\\)), the midpoint of the transition lies at \\(V_M=V_{DD}/2\\), giving symmetric noise margins.\n\n**Dynamic behavior.**  \nDuring a transition both transistors conduct briefly, producing a short-circuit current spike; the load capacitance \\(C_L\\) is charged through \\(M_2\\) (rising edge) or discharged through \\(M_1\\) (falling edge). Propagation delay is set by these RC time constants and scales with \\(C_L V_{DD}/I_{D,\\text{sat}}\\).\n\nIn summary, the circuit is a low-static-power, rail-to-rail logic inverter whose noise margins and delay can be set by the relative strengths of \\(M_1\\) and \\(M_2\\).",
        "format": "markdown",
        "sha256": "2f2c0167564be3e1142fd673d48a947367f83beb3700045b457514ffdf7d21a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up, with correct logic and static behavior. The optional analysis is consistent with inverter operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1511,
        "output_tokens": 982,
        "total_tokens": 2493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 387,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1511,
        "output_tokens": 982,
        "total_tokens": 2493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 387,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a standard CMOS inverter.\n\n- \\(M_2\\) (top) is a PMOS transistor whose source is tied to \\(V_{DD}\\).\n- \\(M_1\\) (bottom) is an NMOS transistor whose source is tied to ground.\n- The gates of both devices are tied together to form the input \\(V_{in}\\); the drains are tied together to form the output \\(V_{out}\\).\n\n**Operation**\n- \\(V_{in}=0\\): \\(M_1\\) is cut off, \\(M_2\\) is on \\(\\Rightarrow V_{out}=V_{DD}\\).\n- \\(V_{in}=V_{DD}\\): \\(M_2\\) is cut off, \\(M_1\\) is on \\(\\Rightarrow V_{out}=0\\).\n\nThus the circuit realizes the Boolean NOT function. In steady state one transistor is always off, so static power is ideally zero; power is consumed only during switching (dynamic power) and through leakage.",
        "format": "markdown",
        "sha256": "2148e3f97638d695b83fdadf17a7abd71b180e1322cdfbb713b1057b614d2524"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its PMOS pull-up and NMOS pull-down, and their complementary operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1511,
        "output_tokens": 672,
        "total_tokens": 2183,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 465,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1511,
        "output_tokens": 672,
        "total_tokens": 2183,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 465,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a standard CMOS inverter.\n\n**Devices**\n- \\(M_1\\): NMOS, source at ground, drain at \\(V_{out}\\), gate at \\(V_{in}\\)\n- \\(M_2\\): PMOS (gate bubble), source at \\(V_{DD}\\), drain at \\(V_{out}\\), gate at \\(V_{in}\\)\n\nThe two drains form the output; the two gates form the input.\n\n**Operation**\n- \\(V_{in}=0\\): \\(M_1\\) is off (\\(V_{GS}=0\\)). \\(M_2\\) is on (\\(V_{SG}=V_{DD}\\)). \\(V_{out}\\) is pulled to \\(V_{DD}\\).\n- \\(V_{in}=V_{DD}\\): \\(M_1\\) is on. \\(M_2\\) is off (\\(V_{SG}=0\\)). \\(V_{out}\\) is pulled to \\(0\\).\n\nSo \\(V_{out}=\\overline{V_{in}}\\).\n\n**Static behavior**\nIn either logic state only one device is on, so there is no DC path from \\(V_{DD}\\) to ground. Static power is essentially leakage only. Current is drawn mainly while the output switches (charging/discharging the load capacitance, plus a brief shoot-through when both devices are partially on).\n\n**Transfer characteristic**\nThe voltage transfer curve is a steep inverting step. The switching threshold is near \\(V_{DD}/2\\) when the NMOS and PMOS are sized so their strengths match (typically the PMOS is wider, since hole mobility is lower). Output levels are full rail-to-rail: \\(0\\) and \\(V_{DD}\\).",
        "format": "markdown",
        "sha256": "3a8fc39a1b34b4aacd17050aac879aaa16deb3b7190fec453f86fa87ea1efc38"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and their operation. The additional transfer-curve and switching-power comments are consistent with the circuit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1511,
        "output_tokens": 693,
        "total_tokens": 2204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 336,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1511,
        "output_tokens": 693,
        "total_tokens": 2204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 336,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a standard CMOS inverter.\n\n- \\(M_1\\) is a PMOS transistor (pull-up device) whose source is tied to \\(V_{DD}\\).\n- \\(M_2\\) is an NMOS transistor (pull-down device) whose source is tied to ground.\n- Both gates are driven by \\(V_{in}\\); the drains are joined to form \\(V_{out}\\).\n\n**Operation**\n- \\(V_{in}=0\\): \\(M_1\\) is on, \\(M_2\\) is off \\(\\rightarrow V_{out}=V_{DD}\\).\n- \\(V_{in}=V_{DD}\\): \\(M_1\\) is off, \\(M_2\\) is on \\(\\rightarrow V_{out}=0\\).\n\nThus the circuit realizes the Boolean function \\(V_{out}=\\overline{V_{in}}\\). Static power is essentially zero (no DC path from \\(V_{DD}\\) to ground except during the brief switching transient). The voltage-transfer characteristic is a sharp high-gain transition centered near \\(V_{DD}/2\\) when the two transistors are sized for equal drive strength.",
        "format": "markdown",
        "sha256": "0ddd577d61dff583e4f9708f13ee06dc490bd27bad85e687f54bca40e59ecbbe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper transistor as PMOS and analyzes the circuit as an ordinary CMOS inverter. The figure has two NMOS devices, so this violates the golden solution’s non-negotiable scoring rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1524,
        "output_tokens": 773,
        "total_tokens": 2297,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 536,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1524,
        "output_tokens": 773,
        "total_tokens": 2297,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 536,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a CMOS inverter (NOT gate).\n\n**Devices**\n- \\(M_1\\) is a PMOS transistor: source at \\(V_{DD}\\), drain at \\(V_{out}\\), gate at \\(V_{in}\\).\n- \\(M_2\\) is an NMOS transistor: source at ground, drain at \\(V_{out}\\), gate at \\(V_{in}\\).\n- The two drains form the output node; the gates are tied together as the input.\n\n**Logic behavior**\n- \\(V_{in}=0\\): \\(M_2\\) is off and \\(M_1\\) is on, so \\(V_{out}\\) is pulled to \\(V_{DD}\\) (logic 1).\n- \\(V_{in}=V_{DD}\\): \\(M_1\\) is off and \\(M_2\\) is on, so \\(V_{out}\\) is pulled to ground (logic 0).\n\nThus \\(V_{out}=\\overline{V_{in}}\\).\n\n**Key properties**\n- Output swings rail to rail (\\(0\\) to \\(V_{DD}\\)).\n- Static current is ideally zero in either logic state; power is drawn mainly while switching (and from leakage).\n- Input impedance is very high (gate current is negligible); the output can drive a load when the corresponding transistor is on.\n- The switching threshold and rise/fall balance depend on the relative strengths of \\(M_1\\) and \\(M_2\\) (usually set by \\(W/L\\)) and on their threshold voltages.",
        "format": "markdown",
        "sha256": "69207f9a6437233f8cf8c4d34c31b6691a6d9678facd3003027f2f73d1e9a80d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as PMOS and analyzes the circuit as a conventional CMOS inverter; both devices are NMOS, so the required topology identification is wrong.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1524,
        "output_tokens": 782,
        "total_tokens": 2306,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 460,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1524,
        "output_tokens": 782,
        "total_tokens": 2306,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 460,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **CMOS inverter** (NOT gate).\n\n## Topology\n- **\\(M_1\\)** (top): PMOS, source at \\(V_{DD}\\), drain at \\(V_{out}\\), gate at \\(V_{in}\\)\n- **\\(M_2\\)** (bottom): NMOS, source at ground, drain at \\(V_{out}\\), gate at \\(V_{in}\\)\n- Both gates share \\(V_{in}\\); the drains are tied together as \\(V_{out}\\)\n\n## Operation\n| \\(V_{in}\\) | \\(M_1\\) (PMOS) | \\(M_2\\) (NMOS) | \\(V_{out}\\) |\n|---|---|---|---|\n| Low (\\(0\\)) | ON | OFF | High (\\(\\approx V_{DD}\\)) |\n| High (\\(V_{DD}\\)) | OFF | ON | Low (\\(\\approx 0\\)) |\n\nSo \\(V_{out} = \\overline{V_{in}}\\).\n\n## Key properties\n- **Full swing:** output reaches the rails (\\(0\\) and \\(V_{DD}\\)), not a \\(V_t\\) drop short of them.\n- **No static path:** in either logic state one device is off, so DC current is only leakage. Power is mainly dynamic (\\(CV^2f\\)) while switching.\n- **High input impedance:** gates draw essentially no DC current.\n- **Threshold:** the trip point is near \\(V_{DD}/2\\) when the PMOS is widened to offset its lower mobility (often \\(W_p/W_n \\approx \\mu_n/\\mu_p\\)).",
        "format": "markdown",
        "sha256": "161445a8a013daecf44e97551ed223327a6d9f76be06e13112eeb58fd27bcac7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper transistor as PMOS and analyzes the circuit as an ordinary CMOS inverter. Both devices are NMOS; the upper is a source-follower pull-up, so this is not an inverter.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1524,
        "output_tokens": 938,
        "total_tokens": 2462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 594,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1524,
        "output_tokens": 938,
        "total_tokens": 2462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 594,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows an NMOS inverter with a diode-connected PMOS load. It is an inverting, ratioed logic gate, not a complementary CMOS inverter.\n\n### Devices and connections\n- **M1** is an NMOS driver: gate at \\(V_{in}\\), source at ground, drain at the output node.\n- **M2** is a PMOS load: source at \\(V_{DD}\\), gate tied to its drain (diode-connected), drain at the output node.\n- \\(V_{out}\\) is taken at the M1–M2 junction.\n\nBecause M2’s gate and drain are shorted, \\(V_{SG2}=V_{SD2}\\). For \\(|V_{SG2}|>|V_{tp}|\\), M2 is in saturation and behaves as a nonlinear active load.\n\n### Logic levels\n**\\(V_{in}\\) low (0):** M1 is off. With no DC path to ground, M2 sits at the edge of conduction, so\n\\[\nV_{OH}=V_{DD}-|V_{tp}|.\n\\]\nThe high level is not a full rail; it is one PMOS threshold below \\(V_{DD}\\).\n\n**\\(V_{in}\\) high:** M1 turns on and pulls the output down against M2, which remains on. Both devices conduct, so\n\\[\nV_{OL}\n\\]\nis set by the strength ratio \\((W/L)_1/(W/L)_2\\), not by complementary switching. A much stronger M1 is required for a low \\(V_{OL}\\).\n\nThe gate therefore inverts, but both levels are ratioed and \\(V_{OH}\\) is degraded.\n\n### Transfer and power\n- The VTC is inverting. Gain in the transition region comes from M1’s \\(g_m\\) loaded by M2’s small-signal resistance (roughly \\(1/g_{m2}\\) in saturation).\n- When the output is low, a static current flows from \\(V_{DD}\\) through M2 and M1 to ground, so the circuit dissipates static power. Unlike CMOS, it is not zero-static-power logic.\n- Noise margins are poorer than CMOS because \\(V_{OH}<V_{DD}\\) and \\(V_{OL}\\) depends on sizing.\n\n### Design notes\n- Size M1 wider than M2 to keep \\(V_{OL}\\) low; that ratio also sets static current and speed.\n- M2 never fully turns off for \\(V_{out}<V_{DD}-|V_{tp}|\\), so it cannot restore a full high level or provide the rail-to-rail, low-static-power behavior of a CMOS inverter (where the PMOS gate would also be driven by \\(V_{in}\\)).",
        "format": "markdown",
        "sha256": "d50df2e88d1abf2c074a6a8e826f26686c1b1dc3f7bfa91b1880d81fbd895f4a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage and diode-connected PMOS load, and describes an inverting gain from M1’s transconductance into roughly M2’s 1/gm2 load, equivalent to −gm1/gm2 with channel-length modulation neglected. The threshold-level high-output description is allowed by the golden solution.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1878,
        "output_tokens": 2284,
        "total_tokens": 4162,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1706,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1878,
        "output_tokens": 2284,
        "total_tokens": 4162,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1706,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a ratioed NMOS inverter with a diode-connected PMOS load, not a complementary CMOS inverter.\n\n## Devices and connections\n\n- **M1 (NMOS driver):** gate = \\(V_{in}\\), source = ground, drain = \\(V_{out}\\). It is the pull-down.\n- **M2 (PMOS load):** source = \\(V_{DD}\\), gate shorted to its drain at the \\(V_{out}\\) node. The gate–drain short makes it diode-connected (always at the edge of saturation when it conducts). It is a nonlinear pull-up, not an input-driven complementary device.\n\nThe feature that distinguishes this from a CMOS inverter is that M2’s gate goes to \\(V_{out}\\), not to \\(V_{in}\\).\n\n## DC behavior\n\n**\\(V_{in}\\) low (below \\(V_{tn}\\)):** M1 is off, so there is no path to ground. M2 sources current until \\(V_{SG2}=|V_{tp}|\\), then turns off. Neglecting leakage,\n\n\\[\nV_{OH}=V_{DD}-|V_{tp}|.\n\\]\n\nThe high level is degraded by one PMOS threshold; it does not reach the rail.\n\n**\\(V_{in}\\) high:** M1 turns on and fights M2. M2 stays in saturation with\n\n\\[\nI_{D2}=\\tfrac12\\mu_p C_{ox}\\!\\left(\\frac{W}{L}\\right)_2(V_{DD}-V_{out}-|V_{tp}|)^2,\n\\]\n\nwhile M1 is in triode for a small \\(V_{OL}\\). Equating currents gives a nonzero \\(V_{OL}\\) set by the strength ratio \\((W/L)_1/(W/L)_2\\). For a usable low, M1 must be made sufficiently stronger than M2 so that \\(V_{OL}\\) is below the threshold of the next gate.\n\n## Transfer characteristic and gain\n\n- For \\(V_{in}<V_{tn}\\), \\(V_{out}\\) sits at \\(V_{OH}\\).\n- Above \\(V_{tn}\\), \\(V_{out}\\) falls; the transition point and slope depend on the \\(W/L\\) ratio and the two thresholds.\n- In the transition region the diode-connected load looks like a small resistance \\(\\sim 1/g_{m2}\\), so the small-signal gain is only on the order of \\(-g_{m1}/g_{m2}\\). The VTC is soft compared with a CMOS inverter.\n\n## Power and noise margins\n\n- **Static current only when the output is low:** M1 and M2 both conduct, forming a DC path from \\(V_{DD}\\) to ground. When the output is high, M1 is off and M2 is off at equilibrium, so static current is essentially zero. Average static power therefore depends on how often the output is low.\n- **Noise margins are asymmetric and reduced:** \\(V_{OH}\\) is short of the rail by \\(|V_{tp}|\\), and \\(V_{OL}\\) is ratio-dependent rather than a hard ground. Both high and low margins are worse than in CMOS, and there is no rail-to-rail swing.\n\n## Practical reading\n\nThis is classic ratioed, saturated-load logic: simple and able to invert, but it burns static power in the low state, needs ratioed sizing to guarantee \\(V_{OL}\\), and has a weak, threshold-limited high level. A CMOS inverter avoids all three by driving the PMOS gate from \\(V_{in}\\) instead of tying it to the output.",
        "format": "markdown",
        "sha256": "58282a013a8e1d05dd79579511e7c3cc08636f24ce58e63f1e6dac16eb405b0d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain −gm1/gm2. The additional large-signal discussion does not undermine the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1878,
        "output_tokens": 3746,
        "total_tokens": 5624,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2986,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1878,
        "output_tokens": 3746,
        "total_tokens": 5624,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2986,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure is an NMOS depletion-load inverter (ratioed logic).\n\n## Devices and connections\n- \\(M_1\\) is an enhancement NMOS driver: gate \\(=V_{\\text{in}}\\), source at ground, drain at \\(V_{\\text{out}}\\), threshold \\(V_{t1}>0\\).\n- \\(M_2\\) is a depletion NMOS load (thick channel bar): drain at \\(V_{DD}\\), gate tied to source at \\(V_{\\text{out}}\\). Thus \\(V_{GS2}=0\\) always. Because it is depletion mode, \\(V_{t2}<0\\), so it still conducts at \\(V_{GS}=0\\).\n\nAn enhancement device in the load position would be off at \\(V_{GS}=0\\) and could not pull the output up; the gate-to-source short is what identifies \\(M_2\\) as the depletion load (as opposed to a saturated enhancement load, whose gate would return to the \\(V_{DD}\\) side).\n\nUse \\(k_i=\\frac12\\mu_n C_{ox}(W/L)_i\\).\n\n## Qualitative behavior\n- \\(V_{\\text{in}}\\) low (\\(<V_{t1}\\)): \\(M_1\\) off, no current, so \\(V_{\\text{out}}=V_{DD}\\). The high level is a full rail — the main advantage over an enhancement load.\n- \\(V_{\\text{in}}\\) high: \\(M_1\\) turns on and fights the load. \\(M_2\\) remains on (\\(V_{GS2}=0\\)) and, with \\(V_{\\text{out}}\\) low, sits in saturation carrying \\(I_D=k_2V_{t2}^2\\). \\(M_1\\) must be made stronger than \\(M_2\\) to pull \\(V_{\\text{out}}\\) down to a valid low.\n\n## Transfer characteristic\n\\(M_2\\) is saturated for \\(V_{\\text{out}}\\le V_{DD}-|V_{t2}|\\) and linear above that; \\(M_1\\) is off, saturated, or linear as usual.\n\n1. \\(V_{\\text{in}}<V_{t1}\\): \\(V_{\\text{out}}=V_{DD}\\). So \\(V_{OH}=V_{DD}\\).\n2. \\(M_1\\) saturated, \\(M_2\\) linear (output still high):\n   \\[k_1(V_{\\text{in}}-V_{t1})^2=k_2\\big[2|V_{t2}|(V_{DD}-V_{\\text{out}})-(V_{DD}-V_{\\text{out}})^2\\big].\\]\n3. Both saturated: with no channel-length modulation the currents match at only one input,\n   \\[V_{\\text{in}}=V_{t1}+|V_{t2}|\\sqrt{k_2/k_1},\\]\n   and the characteristic is vertical there (finite slope once \\(\\lambda\\) is included). This is the high-gain switching region.\n4. \\(M_1\\) linear, \\(M_2\\) saturated (output low):\n   \\[k_1\\big[2(V_{\\text{in}}-V_{t1})V_{\\text{out}}-V_{\\text{out}}^2\\big]=k_2V_{t2}^2.\\]\n\n## Output low and required ratio\nAt \\(V_{\\text{in}}=V_{DD}\\), \\(M_2\\) is saturated and \\(M_1\\) linear. For small \\(V_{OL}\\),\n\\[V_{OL}\\approx\\frac{k_2V_{t2}^2}{2k_1(V_{DD}-V_{t1})}.\\]\nTo keep \\(V_{OL}\\) below the next gate’s threshold, the driver must be stronger than the load:\n\\[k_R=\\frac{k_1}{k_2}=\\frac{(W/L)_1}{(W/L)_2}\\gtrsim 4.\\]\nThe low level is set by geometry, not restored to ground — hence “ratioed.”\n\n## Power and limitations\nWhenever the output is low, the load’s saturation current \\(k_2V_{t2}^2\\) flows continuously from \\(V_{DD}\\) to ground, so the gate has static dissipation \\(P=V_{DD}\\,k_2V_{t2}^2\\) in that state. There is no static current when the output is high. That standby power, plus the area cost of the ratioed driver, is why this family was displaced by CMOS. Its compensating merits are \\(V_{OH}=V_{DD}\\), a sharper transition than a saturated enhancement load, and only one threshold polarity to fabricate (plus a depletion implant).",
        "format": "markdown",
        "sha256": "183fb450fe063d180b46425c1308a4e3f019bfaaa54f0dceec02a19634cfc130"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a depletion-NMOS-load inverter. The figure is a common-source NMOS stage with a diode-connected PMOS load, so the proposed device connections, transfer analysis, and power discussion do not apply.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1878,
        "output_tokens": 5933,
        "total_tokens": 7811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4924,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1878,
        "output_tokens": 5933,
        "total_tokens": 7811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4924,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure is an NMOS common-drain stage (a source follower) with an active pull-down load.\n\n**Connections**\n- \\(M_2\\) (upper device): drain at \\(V_{DD}\\), gate driven by \\(V_{in}\\), source at the output node \\(V_{out}\\). The signal enters at the gate and leaves at the source, with the drain at AC ground, so \\(M_2\\) is in the common-drain configuration.\n- \\(M_1\\) (lower device): its channel sits between \\(V_{out}\\) and ground, and its gate is grounded. One channel terminal and the gate are therefore both at \\(0\\,\\text{V}\\), which fixes \\(V_{GS1}=0\\).\n\n**Biasing of \\(M_1\\)**\nWith \\(V_{GS1}=0\\), an enhancement device (\\(V_t>0\\)) would be cut off and the stage would have no bias current and no pull-down. The circuit only functions if \\(M_1\\) is a depletion-mode NMOS (\\(V_{t1}<0\\)), which still conducts at \\(V_{GS}=0\\). Provided \\(V_{out}\\) is large enough to saturate it (\\(V_{out}>|V_{t1}|\\)), it behaves as a constant current sink\n\\[\nI_1=\\tfrac12 k_{n1}V_{t1}^{2}.\n\\]\n\n**Large-signal behavior**\nThat same current is sourced by \\(M_2\\). \\(M_2\\) operates in saturation, so\n\\[\nI_1=\\tfrac12 k_{n2}(V_{GS2}-V_{t2})^{2}\n\\quad\\Rightarrow\\quad\nV_{GS2}=V_{t2}+\\sqrt{\\tfrac{2I_1}{k_{n2}}}.\n\\]\nHence\n\\[\nV_{out}=V_{in}-V_{GS2}=V_{in}-V_{t2}-V_{ov2}.\n\\]\nThe output follows the input with unity gain and a constant downward level shift fixed by the current that \\(M_1\\) sets.\n\n**Small signal**\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m2}}{g_{m2}+g_{mb2}+g_{o2}+g_{o1}}\\approx 1,\n\\]\na little below unity because of the body effect (\\(g_{mb2}\\)), since \\(M_2\\)'s source sits at \\(V_{out}\\) rather than at the body. The stage has very high input impedance and low output impedance (\\(\\approx 1/g_{m2}\\)), so it acts as a buffer.",
        "format": "markdown",
        "sha256": "77e0496d6aa960b055f7309c2ca3a751282922f09dada1908eb2b7aac27bfff4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies both devices as NMOS and the circuit as a source follower. The actual circuit is a PMOS common-source stage with a diode-connected PMOS load, so its gain and operation are incorrectly analyzed.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2676,
        "output_tokens": 11124,
        "total_tokens": 13800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10551,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2676,
        "output_tokens": 11124,
        "total_tokens": 13800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10551,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows two MOSFETs stacked between \\(V_{DD}\\) and ground, with the output taken at the shared intermediate node.\n\n**Connections**\n- \\(M_2\\) (top): gate driven by \\(V_{in}\\), upper terminal tied to \\(V_{DD}\\), lower terminal tied to the output node \\(V_{out}\\). With its source at \\(V_{DD}\\), this is the p-channel device.\n- \\(M_1\\) (bottom): drain tied to \\(V_{out}\\), gate tied to ground, and source tied to ground. With its source at ground and the arrow into the channel, this is an n-channel device.\n\n**Behavior**\n- For \\(M_1\\), \\(V_{GS}=V_G-V_S=0\\). An enhancement NMOS conducts only for \\(V_{GS}>V_{tn}\\) (\\(V_{tn}>0\\)), so \\(M_1\\) is cut off for any value of \\(V_{out}\\) and carries no current.\n- Since \\(M_1\\) and \\(M_2\\) are in series and \\(M_1\\) is an open circuit, there is no DC path from \\(V_{DD}\\) to ground.\n- \\(M_2\\) (PMOS) turns on only when \\(V_{SG}=V_{DD}-V_{in}>|V_{tp}|\\), i.e. \\(V_{in}<V_{DD}-|V_{tp}|\\). When it is on it carries no current, so its drain–source drop is zero and it simply clamps \\(V_{out}=V_{DD}\\). When \\(V_{in}\\) is high enough to turn \\(M_2\\) off, nothing drives the output, so \\(V_{out}\\) floats (high impedance), held only by capacitance and leakage.\n\n**Conclusion:** As drawn, \\(M_1\\)'s gate is grounded, so it is permanently off and the circuit has no active pull-down. The output is driven to \\(V_{DD}\\) only while \\(M_2\\) conducts and is otherwise high-impedance, so the circuit does not implement a static logic function. (Tying \\(M_1\\)'s gate to \\(V_{in}\\) instead of ground would turn the pair into an ordinary CMOS inverter.)",
        "format": "markdown",
        "sha256": "a7e790e158de9ee14e15ac71e1261cf0ebc8da7d99a568dc11b69201035e2e62"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS with its source grounded. M1 is a PMOS diode-connected to ground, so it provides the load conductance; the output is not floating. This misses the essential topology and gm/gm gain mechanism.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2676,
        "output_tokens": 8049,
        "total_tokens": 10725,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7572,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2676,
        "output_tokens": 8049,
        "total_tokens": 10725,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7572,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows two enhancement NMOS transistors (arrows point into the channel).\n\n**Connections**\n- \\(M_2\\): drain at \\(V_{DD}\\), gate at \\(V_{in}\\), source at the output node → common-drain (source-follower) device.\n- \\(M_1\\): drain at the output node, gate tied to ground, source tied to ground → \\(V_{GS1}=0\\).\n\n**Operating point**\n- Since \\(M_1\\) is enhancement-mode with \\(V_{GS1}=0<V_t\\), it is **cut off** and carries no current. It provides neither a pull-down nor a bias current.\n- With no DC load, \\(M_2\\) conducts only while charging the capacitance at \\(V_{out}\\). Conduction stops at the onset of turn-on, \\(V_{GS2}=V_t\\), i.e.\n\n\\[\nV_{out}=V_{in}-V_t \\quad (V_{in}>V_t)\n\\]\n\nAt that point \\(V_{DS2}=V_{DD}-V_{out}>V_{GS2}-V_t\\), so \\(M_2\\) is in saturation right up to cutoff, and then both devices are off.\n\n**Behavior**\n- The circuit level-shifts \\(V_{in}\\) down by one threshold and then holds that voltage on the output capacitance; there is no static current and no static power.\n- Because \\(M_1\\) is off there is **no discharge path**, so \\(V_{out}\\) can only be driven upward. If \\(V_{in}\\) falls, \\(V_{out}\\) stays at its previous peak (\\(\\max(V_{in}-V_t)\\)). It is therefore not a linear follower for falling inputs — it behaves like a capacitive peak/level shifter.\n- A true source follower would require \\(M_1\\) to sink current (depletion device with \\(V_{GS}=0\\), or an enhancement device with its gate biased above \\(V_t\\)); as drawn, it does not.",
        "format": "markdown",
        "sha256": "7d859dd46fb69854d25225c57986fe2b71bf617caeb3c2cdd99d25b7f97417ef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies both devices as NMOS and treats M1 as an off, nonconducting device. In fact, both are PMOS: M2 is the common-source input device and M1 is a diode-connected PMOS load, giving approximately Av = -gm2/gm1.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2676,
        "output_tokens": 4968,
        "total_tokens": 7644,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4529,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2676,
        "output_tokens": 4968,
        "total_tokens": 7644,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4529,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal resistance \\(R_\\text{out}\\) is found by applying a test voltage at the source of \\(M_1\\) (with the gates and \\(V_{DD}\\) at AC ground) and computing the ratio of this voltage to the current that enters the source terminal.\n\nWith body effect omitted (bulk terminals are not drawn separately from the sources), KCL at the intermediate node together with the hybrid-\\(\\pi\\) models of the two devices produces\n\\[\nR_\\text{out}=\\frac{r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}}{(1+g_{m1}r_{o1})(1+g_{m2}r_{o2})}.\n\\]\n\n(The same result is obtained by first evaluating the resistance \\(R_X=r_{o2}/(1+g_{m2}r_{o2})\\) seen looking into the source of \\(M_2\\) and then substituting into the general expression for the resistance looking into the source of a MOSFET whose drain is terminated by \\(R_X\\).)\n\nFinal answer: \\(\\dfrac{r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}}{(1+g_{m1}r_{o1})(1+g_{m2}r_{o2})}\\)",
        "format": "markdown",
        "sha256": "7fe3101f5a3ff229b55db33fb3a1909386857af64038c5175a52c8e5d7731ca1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It applies the test voltage at M1’s source rather than the output at M1’s drain, and its expression uses gm2 instead of the M1 cascode factor. The resulting resistance is not the output resistance of the shown cascode.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3502,
        "output_tokens": 22340,
        "total_tokens": 25842,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3502,
        "output_tokens": 22340,
        "total_tokens": 25842,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a cascode current source, with the output port taken at the drain of \\(M_1\\). Both gates and the top supply terminal are ac grounds. Consequently \\(M_2\\) appears in the small-signal circuit simply as the resistance \\(r_{o2}\\) connected from the intermediate node to ac ground, while a test source applied at the output port sees the drain of \\(M_1\\).\n\nWith this source-degeneration resistance the resistance looking into the drain of \\(M_1\\) evaluates to\n\\[\nR_\\text{out}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}.\n\\]\n(The same result is obtained by writing the small-signal KCL equations at the intermediate node and at the output port and forming the ratio of test voltage to test current.)\n\nFinal answer: \\(r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\\)",
        "format": "markdown",
        "sha256": "2038be68a141ab96de8dea7aa31aeb5753eaa5f055e5dcbfa1083961e95bf4ba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Uses M1 as the cascode device and gives the correct Rout expression; omitting body effect and explicit PMOS labels is allowed by the golden solution.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3502,
        "output_tokens": 66657,
        "total_tokens": 70159,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 66446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3502,
        "output_tokens": 66657,
        "total_tokens": 70159,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 66446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a PMOS cascode with fixed gate biases (AC grounds) and with the body of each device tied to its source. The small-signal resistance seen at the drain of \\(M_1\\) is therefore obtained by applying a test voltage at that drain and computing the ratio of test voltage to the current that enters the drain.\n\nWith the hybrid-\\(\\pi\\) model the KCL equations at the intermediate node and at the output node produce three terms, giving the exact result\n\\[\nR_\\text{out}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}.\n\\]\n\nFinal answer: \\(r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\\)",
        "format": "markdown",
        "sha256": "c0d730dddd1cdca306a31eee94d755dcb368a287c093523902942e99f84abb92"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode with M1 as the output-side cascode device and gives the required Rout expression; omission of body effect is explicitly allowed.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3502,
        "output_tokens": 21981,
        "total_tokens": 25483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21817,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3502,
        "output_tokens": 21981,
        "total_tokens": 25483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21817,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a PMOS cascode. The device symbols have their source terminals at the top, so the source of \\(M_2\\) lies at \\(V_{DD}\\) while its drain lies at the intermediate node \\(X\\).\n\nA PMOS transistor is in saturation when \\(V_{SD}\\ge V_{SG}-|V_t|\\). Substituting the terminal voltages of \\(M_2\\) immediately simplifies this requirement to\n\\[\nV_X\\le V_{b2}+|V_t|.\n\\]\n\nTransistor \\(M_1\\) sets the same node voltage to\n\\[\nV_X=V_{b1}+|V_{GS1}|=V_{b1}+|V_t|+V_{ov1}\n\\]\n(body effect is absent because the three-terminal symbols imply the body of each device is tied to its source). Inserting the expression for \\(V_X\\) yields the equivalent bias constraint\n\\[\nV_{b2}\\ge V_{b1}+V_{ov1}.\n\\]\n\nThus \\(M_2\\) is guaranteed to remain in saturation precisely when the two gate bias voltages satisfy the inequality above.\n\nFinal answer: \\(V_{b2}\\ge V_{b1}+V_{ov1}\\)",
        "format": "markdown",
        "sha256": "f8edbdeb026314203d4682d568308c6bc1982b6f909fdc8bcd553fbf5263bca7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, and uses the relation between VX and Vb1 to derive the bias constraint. The result assumes equal threshold magnitudes, as in the golden solution.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3416,
        "output_tokens": 51913,
        "total_tokens": 55329,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 51650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3416,
        "output_tokens": 51913,
        "total_tokens": 55329,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 51650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The drain of \\(M_2\\) sits at the fixed potential \\(V_{DD}\\) while its gate sits at the fixed bias \\(V_{b2}\\).  With the source at the intermediate node \\(X\\), the saturation condition \\(V_{DS}\\ge V_{GS}-V_t\\) therefore reads\n\\[\nV_{DD}-V_X\\ge(V_{b2}-V_X)-V_t.\n\\]\nThe \\(V_X\\) terms cancel, leaving the simple requirement\n\\[\nV_{b2}\\le V_{DD}+V_t.\n\\]\n(The same relation can be written \\(V_{GD}\\le V_t\\).)  Any bias satisfying the inequality keeps \\(M_2\\) in saturation for every value of \\(V_X\\).  In ordinary designs \\(V_{b2}<V_{DD}\\), so the inequality holds automatically.\n\nFinal answer: \\(V_{b2}\\le V_{DD}+V_t\\)",
        "format": "markdown",
        "sha256": "eb247efa2f5564bc4b1489248b1d303b1baecc9ece71e6cb6a6e991e6512ae42"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer treats M2 as an NMOS with its drain at VDD, but M2 is a PMOS whose source is at VDD and drain is at X. It therefore gives an invalid condition and misses that X is set by Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3416,
        "output_tokens": 12756,
        "total_tokens": 16172,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12550,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3416,
        "output_tokens": 12756,
        "total_tokens": 16172,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12550,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a PMOS cascode biased by the DC gate voltages \\(V_{b1}\\) and \\(V_{b2}\\). With the source of \\(M_2\\) at \\(V_{DD}\\), the saturation condition \\(V_{SD2}\\ge V_{OV2}\\) simplifies directly to\n\\[\nV_X\\le V_{b2}+|V_t|.\n\\]\nBecause \\(X\\) is also the source terminal of \\(M_1\\),\n\\[\nV_X=V_{b1}+|V_t|+V_{OV1}.\n\\]\nSubstitution of this expression yields the equivalent, readily enforced requirement\n\\[\nV_{b2}-V_{b1}\\ge V_{OV1}.\n\\]\n(The same bias choice is readily realized by a stacked diode-connected reference that reproduces the desired over-drive.) When the inequality is satisfied, \\(M_2\\) remains in saturation for any allowable voltage at the output port.\n\nFinal answer: \\(V_{b2}-V_{b1}\\ge V_{OV1}\\)",
        "format": "markdown",
        "sha256": "c772db6429e73f4b770f198b44efbccbee8f42bab3f095edb872253478afb361"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives M2’s PMOS saturation condition, relates VX to Vb1 through M1’s gate-source voltage, and derives the equivalent bias requirement Vb2 − Vb1 ≥ VOV1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3416,
        "output_tokens": 44777,
        "total_tokens": 48193,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 44554,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3416,
        "output_tokens": 44777,
        "total_tokens": 48193,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 44554,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows an NMOS cascode amplifier with a current-source load. \\(M_1\\) is the common-source input device, \\(M_2\\) is the common-gate cascode device, and \\(I_1\\) sets the bias current.\n\n## Topology and bias\n\nBoth devices are NMOS and, in normal operation, are biased in saturation with the same drain current \\(I_1\\):\n\n- \\(M_1\\): gate \\(= V_{\\text{in}}\\), source at ground, drain at the intermediate node \\(X\\)\n- \\(M_2\\): gate at fixed bias \\(V_{b1}\\), source at \\(X\\), drain at \\(V_{\\text{out}}\\)\n- \\(I_1\\): ideal bias from \\(V_{DD}\\) into the output node\n\n\\(V_{\\text{in}}\\) is a DC bias plus a small signal. \\(V_{b1}\\) is chosen so both transistors stay in saturation over the intended swing:\n\n\\[\nV_X \\ge V_{\\text{in}} - V_{TH1}, \\qquad V_{\\text{out}} \\ge V_{b1} - V_{TH2}\n\\]\n\nThe lowest useful output voltage is set by the two overdrives stacked in series:\n\n\\[\nV_{\\text{out,min}} \\approx V_{OV1} + V_{OV2}\n\\]\n\nThat reduced swing is the main cost of the cascode.\n\n## Small-signal behavior\n\nAt low frequency the gate of \\(M_1\\) draws no current, so \\(R_{\\text{in}} \\approx \\infty\\).\n\n\\(M_1\\) converts \\(v_{\\text{in}}\\) into a signal current \\(g_{m1}v_{\\text{in}}\\). \\(M_2\\) passes that current to the output while presenting a low impedance at \\(X\\) (about \\(1/g_{m2}\\)) and a very high impedance at the drain. Neglecting body effect and taking \\(g_m r_o \\gg 1\\), the resistance looking into the drain of \\(M_2\\) is\n\n\\[\nR_{\\text{cas}} \\approx g_{m2}\\, r_{o1}\\, r_{o2}\n\\]\n\n(with body effect, \\(g_{m2}\\) becomes \\(g_{m2}+g_{mb2}\\)). If the current source has finite resistance \\(R_I\\), the gain is\n\n\\[\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} \\approx -g_{m1}\\,(R_{\\text{cas}} \\parallel R_I)\n\\]\n\nWith an ideal current source this is on the order of \\(-(g_m r_o)^2\\), far above the \\(-g_{m1}r_{o1}\\) of a simple common-source stage. In practice \\(R_I\\) usually limits the gain, so the cascode’s benefit is realizing a load impedance close to the full \\(R_I\\) rather than being degraded by \\(r_{o1}\\).\n\n## Why the cascode is used\n\n- **Gain / \\(R_{\\text{out}}\\):** cascoding multiplies the output resistance by about \\(g_{m2}r_{o2}\\), so voltage gain rises by that factor when the load is not already the limit.\n- **Miller effect:** the gain from \\(V_{\\text{in}}\\) to node \\(X\\) is only about \\(-g_{m1}/g_{m2}\\) (often near \\(-1\\)), not the full stage gain. \\(C_{gd1}\\) is therefore not multiplied by a large factor, and the input pole moves out.\n- **Bandwidth:** the non-dominant pole at \\(X\\) sits near \\(g_{m2}/C_X\\), typically well above the output pole. The stage can be faster than a common-source amplifier of the same gain.\n\n## Design constraints\n\n- Size \\(M_1\\) for the desired \\(g_{m1}\\) at current \\(I_1\\); \\(M_2\\) is often similar or somewhat wider to keep \\(V_{OV2}\\) small and preserve swing.\n- Set \\(V_{b1} \\approx V_{OV1}+V_{TH1}+V_{GS2}\\) so \\(M_1\\) is just in saturation at the bias point.\n- Headroom is \\(V_{OV1}+V_{OV2}\\) at the bottom and whatever compliance the current source needs at the top.\n- Output swing, gain (set by \\(R_I \\parallel R_{\\text{cas}}\\)), and the pole at \\(X\\) are the main tradeoffs.",
        "format": "markdown",
        "sha256": "970f17823ce4dfe56b16d032ca64f6fb32e4a064c93b1b7cc0f33496aaaecafd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression (with body effect noted). The golden solution’s full-credit rule applies; the additional low-impedance-at-X discussion does not change the required conclusion.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2363,
        "output_tokens": 3193,
        "total_tokens": 5556,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2217,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2363,
        "output_tokens": 3193,
        "total_tokens": 5556,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2217,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a single-ended NMOS cascode amplifier: a common-source device \\(M_1\\) stacked with a common-gate cascode device \\(M_2\\), biased by the current source \\(I_1\\).\n\n## Topology and roles\n- \\(M_1\\) is the input transistor. Its gate is \\(V_{in}\\) and its source is grounded, so it operates as a common-source stage that converts \\(V_{in}\\) into a signal current.\n- \\(M_2\\) is the cascode transistor. Its gate is held at a fixed bias \\(V_{b1}\\), so for small signals it is a common-gate device. It passes \\(M_1\\)’s signal current up to the output while isolating \\(M_1\\)’s drain from the output swing.\n- \\(I_1\\) sets the quiescent current and is the high-impedance load. \\(V_{out}\\) is taken at the drain of \\(M_2\\).\n- Node \\(X\\) is the source of \\(M_2\\) / drain of \\(M_1\\).\n\nBoth devices are NMOS, and in quiescence the same current \\(I_1\\) flows through \\(M_2\\) and \\(M_1\\).\n\n## Bias point\nFor both transistors to stay in saturation:\n- \\(V_X \\ge V_{ov1}\\), where \\(V_{ov1}=V_{GS1}-V_t\\) is \\(M_1\\)’s overdrive.\n- \\(V_{out}\\ge V_X+V_{ov2}\\).\n\nThe lowest usable output is therefore about\n\\[\nV_{out,\\min}\\approx V_{ov1}+V_{ov2}.\n\\]\nTo place \\(X\\) near this minimum and maximize swing, the cascode bias is set to\n\\[\nV_{b1}\\approx V_{ov1}+V_{GS2}=V_{ov1}+V_t+V_{ov2}.\n\\]\nThe upper end of the swing is set by the compliance of \\(I_1\\), so the available range is roughly \\(V_{ov1}+V_{ov2}\\) to just below \\(V_{DD}\\).\n\n## Small-signal behavior\nWith the gate of \\(M_2\\) at AC ground, the impedance looking into its source is only \\(\\sim 1/(g_{m2}+g_{mb2})\\). Node \\(X\\) therefore moves very little, and almost all of \\(M_1\\)’s signal current \\(g_{m1}v_{in}\\) is steered through \\(M_2\\) into the output node.\n\nThe resistance looking into the drain of \\(M_2\\), with \\(M_1\\)’s gate AC-grounded, is\n\\[\nR_{out}=r_{o1}+r_{o2}+(g_{m2}+g_{mb2})r_{o1}r_{o2}\\approx (g_{m2}+g_{mb2})r_{o1}r_{o2}.\n\\]\nIf the current source has output resistance \\(R_{oI}\\), the gain is\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=-g_{m1}\\big(R_{out}\\parallel R_{oI}\\big).\n\\]\nWith an ideal current source this approaches \\(-g_{m1}(g_{m2}+g_{mb2})r_{o1}r_{o2}\\), i.e. on the order of \\((g_m r_o)^2\\), far above the \\(-g_m r_o\\) of a plain common-source stage. The input resistance is essentially infinite; the output resistance is the large \\(R_{out}\\parallel R_{oI}\\).\n\n## Why the cascode is used\n- **Gain:** the boosted output resistance gives a much larger voltage gain than \\(M_1\\) alone.\n- **Bandwidth:** because \\(X\\) is pinned by the low source impedance of \\(M_2\\), the gain across \\(C_{gd1}\\) is only about \\(-g_{m1}/(g_{m2}+g_{mb2})\\) rather than the full stage gain, so the Miller multiplication of \\(C_{gd1}\\) is largely suppressed and the input pole moves out.\n- **Isolation:** output-voltage variation is absorbed by \\(M_2\\), so it does not modulate \\(M_1\\)’s \\(V_{DS}\\) and the input–output coupling is reduced.\n\nThe price is headroom: two overdrives are stacked at the bottom and the load needs its own compliance, so the output swing is smaller than that of a simple common-source stage.",
        "format": "markdown",
        "sha256": "52612a7fb1ef27ac1f1f6a5122ac9f0965dcb5c5ac56949b539d503f32389c2d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies M1 as the common-source NMOS, M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain. Its claim that node X moves very little is overgeneralized, but the golden full-credit conditions are met.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2363,
        "output_tokens": 3188,
        "total_tokens": 5551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2193,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2363,
        "output_tokens": 3188,
        "total_tokens": 5551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2193,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows an NMOS cascode stage: \\(M_1\\) is the common-source input device, \\(M_2\\) is the common-gate cascode device biased at \\(V_{b1}\\), and \\(I_1\\) is the active load. \\(V_{out}\\) is taken at the drain of \\(M_2\\).\n\n**DC bias.** \\(I_1\\) sets the current in both transistors, so \\(I_{D1}=I_{D2}=I_1\\). Node \\(X\\) sits at \\(V_X=V_{b1}-V_{GS2}\\). For both devices to stay in saturation:\n- \\(M_1\\): \\(V_X\\ge V_{ov1}\\), i.e. \\(V_{b1}\\ge V_{GS2}+V_{ov1}\\)\n- \\(M_2\\): \\(V_{out}\\ge V_X+V_{ov2}\\approx V_{b1}-V_{th2}\\)\n\nThe lowest usable \\(V_{b1}\\) gives a minimum output near \\(V_{ov1}+V_{ov2}\\), so the stage needs roughly two overdrives of headroom — the main swing penalty versus a single transistor.\n\n**Small-signal behavior** (gates of \\(M_2\\) and the current source AC-grounded):\n- Resistance looking into the source of \\(M_2\\) is \\(\\approx 1/g_{m2}\\), so the gain at the intermediate node is only \\(v_x/v_{in}\\approx -g_{m1}/g_{m2}\\) (about \\(-1\\) for matched devices).\n- Output resistance of the stack: \\(R_{out}\\approx g_{m2}r_{o1}r_{o2}\\) (or \\((g_{m2}+g_{mb2})r_{o1}r_{o2}\\) with body effect).\n- The cascode’s short-circuit transconductance is essentially \\(g_{m1}\\), so with load \\(R_L\\)\n  \\[\n  A_v\\approx -g_{m1}\\big(R_{out}\\parallel R_L\\big).\n  \\]\n  With an ideal \\(I_1\\), \\(|A_v|\\approx g_{m1}r_{o1}\\cdot g_{m2}r_{o2}\\) — the product of the two intrinsic gains, far above a simple common-source stage.\n\n**Why it is used.** The low impedance at \\(X\\) keeps the Miller multiplication of \\(C_{gd1}\\) near 2 instead of \\(1+g_{m1}R_L\\), cutting input capacitance and extending bandwidth, while the boosted \\(R_{out}\\) gives very high gain. The costs are the extra bias \\(V_{b1}\\), reduced output swing, and degraded gain if \\(I_1\\) has finite output resistance (it appears in parallel with \\(R_{out}\\)).",
        "format": "markdown",
        "sha256": "750ebcb8db0e1f895861fa4fe04340eaf1b82059e0d3f9731aa6737f03457a20"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the expected gain as \u001b[?]−gm1(Rout∥RL), including the ideal-load product form. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2363,
        "output_tokens": 3041,
        "total_tokens": 5404,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2363,
        "output_tokens": 3041,
        "total_tokens": 5404,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a classic MOS cascode. \\(M_1\\) is configured as a common-source device (gate driven by \\(V_\\text{in}\\), source at ground). \\(M_2\\) sits directly above it in a common-gate configuration (gate held at the fixed bias \\(V_{b1}\\)). The series stack of a CS transistor and a CG transistor is the definition of a cascode.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "df0de8d80aac5fece6aa80bdd720b0bdf9463ce138c5e79bcae41b92737a0320"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower, not a common-source device with its source grounded, so the structure lacks the cascode resistance boost.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2425,
        "output_tokens": 716,
        "total_tokens": 3141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 626,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2425,
        "output_tokens": 716,
        "total_tokens": 3141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 626,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, it is a cascode (common-source device \\(M_1\\) stacked with common-gate device \\(M_2\\)).",
        "format": "markdown",
        "sha256": "8e564de08b62201e5c5ccd17f20f3acba9932b22ba1113452f629934b01f022b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "M1 is a PMOS source follower, not a common-source stage, so the circuit is not a cascode.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2425,
        "output_tokens": 488,
        "total_tokens": 2913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 459,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2425,
        "output_tokens": 488,
        "total_tokens": 2913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 459,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The shown circuit stacks two NMOS devices, with \\(M_1\\) configured as a common-source stage (input at its gate) and \\(M_2\\) configured as a common-gate stage (fixed gate bias \\(V_{b1}\\)). This is the definition of a MOS cascode.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "fa071e120f97f0789abb50035f4988391193496a7a2823a7c8f07000ac3c2449"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower, not a common-source stage, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2425,
        "output_tokens": 678,
        "total_tokens": 3103,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2425,
        "output_tokens": 678,
        "total_tokens": 3103,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect arises because feedback capacitance (e.g., \\(C_{bc}\\) or \\(C_{gd}\\)) appears at the input multiplied by \\(1-A_v\\). In an ordinary common-emitter/common-source stage \\(A_v\\) is large, so the multiplication is severe and bandwidth collapses.\n\nA cascode places a common-base/common-gate device directly on the collector/drain of the input device. That upper device presents a very low impedance (\\(\\approx 1/g_m\\)) at the intermediate node, forcing the voltage gain of the bottom transistor to be only \\(\\approx-1\\). With \\(A_v\\) near unity the Miller multiplier remains small, the input capacitance stays modest, and the high overall voltage gain of the cascode appears only at the low-capacitance output node.\n\nFinal answer: low \\(A_v\\) at intermediate node (Miller mult. \\(\\approx2\\))",
        "format": "markdown",
        "sha256": "2a3eb4b5994a2e223caf36343deb43022fcefe660c126299349b139810df647a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node, the roughly −1 gain across the input device’s Cgd, and the resulting Miller factor of about 2 rather than the full-stage gain.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1256,
        "output_tokens": 590,
        "total_tokens": 1846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 397,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1256,
        "output_tokens": 590,
        "total_tokens": 1846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 397,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect multiplies the feedback capacitance \\(C_\\mu\\) (or \\(C_{gd}\\)) seen at the input of an inverting stage by \\((1-A_v)\\). In a cascode the lower device drives the low input impedance (\\(\\approx 1/g_m\\)) of the upper common-base/common-gate device, so its own voltage gain is only about \\(-1\\). The multiplication factor therefore collapses from a large number to roughly 2, and the Miller contribution to input capacitance becomes negligible.",
        "format": "markdown",
        "sha256": "b29912ac32a8c48e7deba394c19043f09e823805a1cbb8b3d3a131d0fb851b68"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the roughly −1 gain, giving a Miller factor near 2 rather than the large common-source factor. Calling the remaining contribution negligible slightly overstates the reduction, but the key mechanism and factor are correct.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1256,
        "output_tokens": 433,
        "total_tokens": 1689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 321,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1256,
        "output_tokens": 433,
        "total_tokens": 1689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 321,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect multiplies a feedback capacitance \\(C_\\mu\\) (or \\(C_{gd}\\)) by roughly \\(1+|A_v|\\). In a cascode the lower device is loaded by the very low input impedance of the upper (common-base/gate) device, so its own voltage gain is only about \\(-1\\). The multiplication factor therefore stays near 2 instead of becoming large, and the Miller contribution to input capacitance remains small even though the overall cascode still provides high gain.",
        "format": "markdown",
        "sha256": "afb1ac235e32fd9259b441c0573d9d3d72e7e8133ee769b5ec1423897fcc7e2c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the roughly −1 gain across the lower device’s Cgd, giving a Miller factor near 2 rather than the full-stage gain. The effect is reduced, not eliminated; the answer’s “small” is understood comparatively.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1256,
        "output_tokens": 561,
        "total_tokens": 1817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 457,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1256,
        "output_tokens": 561,
        "total_tokens": 1817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 457,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a common-source NMOS amplifier with a PMOS current-source (active) load.\n\n## Devices and connections\n\n- **\\(M_1\\)** is a PMOS transistor: source at \\(V_{DD}\\), gate at the fixed bias \\(V_{b2}\\), drain at \\(V_{out}\\).\n- **\\(M_2\\)** is an NMOS transistor: source at the fixed bias \\(V_{b1}\\), gate at the signal input \\(V_{in}\\), drain at \\(V_{out}\\).\n- \\(V_{out}\\) is the shared drain node. \\(V_{b1}\\) and \\(V_{b2}\\) are DC biases; \\(V_{in}\\) and \\(V_{out}\\) are the signal ports.\n\nThis is not a CMOS logic inverter: the two gates are not tied together, so \\(M_1\\) does not switch with the input.\n\n## Large-signal role of each device\n\nWith \\(V_{b2}\\) fixed, \\(V_{SG1}=V_{DD}-V_{b2}\\) is constant, so \\(M_1\\) behaves as a constant current source as long as it stays in saturation:\n\n\\[\nI_{D1}=\\frac12\\mu_p C_{ox}\\!\\left(\\frac{W}{L}\\right)_1\\!\\big(V_{DD}-V_{b2}-|V_{tp}|\\big)^2\n\\]\n\n(neglecting channel-length modulation). That current is the load current for \\(M_2\\).\n\n\\(M_2\\) is the driver. Its gate-source voltage is \\(V_{GS2}=V_{in}-V_{b1}\\), so the DC value of \\(V_{in}\\) together with \\(V_{b1}\\) sets how hard \\(M_2\\) is turned on. The quiescent output voltage is whatever \\(V_{out}\\) makes \\(I_{D2}=I_{D1}\\).\n\nBoth devices are in saturation (the high-gain region) only when\n\n\\[\nV_{in}-V_{tn}\\;\\le\\;V_{out}\\;\\le\\;V_{b2}+|V_{tp}|.\n\\]\n\nThe upper limit is equivalently about one overdrive below \\(V_{DD}\\). Outside that window one device enters triode and the gain collapses.\n\n## Small-signal behavior\n\nBoth bias nodes are AC grounds, so \\(M_1\\) is a diode-free current-source load and \\(M_2\\) is a common-source transistor. The stage is inverting, with\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=-g_{m2}\\,(r_{o1}\\parallel r_{o2}),\n\\]\n\nwhere \\(g_{m2}\\) is set by the bias current and \\(M_2\\)'s overdrive, and \\(r_{o1}\\parallel r_{o2}\\) is large because the load is active rather than resistive. Input resistance is essentially infinite (MOS gate); output resistance is \\(r_{o1}\\parallel r_{o2}\\).\n\n## Bias intent\n\n- \\(V_{b2}\\) programs the load current (and hence the quiescent current of the stage).\n- \\(V_{b1}\\) sets the source potential of \\(M_2\\), shifting the \\(V_{in}\\) level needed for a given \\(V_{GS2}\\) and fixing the source at AC ground. If \\(V_{b1}=0\\), \\(M_2\\) is an ordinary grounded-source device.\n- The DC component of \\(V_{in}\\) is chosen so that \\(I_{D2}\\) matches \\(I_{D1}\\) at a \\(V_{out}\\) inside the saturation window above, which is where the large gain \\(g_{m2}(r_{o1}\\parallel r_{o2})\\) is available.",
        "format": "markdown",
        "sha256": "78757a0f920ff0173c70705f766bd9032e18d5eaece3d617d52c4f0304db143f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at the gate of M2 and identifies the stage as common-source. The actual circuit is common-gate, with Vin applied at M2's source; this reverses the gain and input-resistance analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2298,
        "output_tokens": 4145,
        "total_tokens": 6443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3339,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2298,
        "output_tokens": 4145,
        "total_tokens": 6443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3339,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows an actively loaded common-source stage, not a CMOS inverter.\n\n**Devices and connections**\n- \\(M_1\\) is a PMOS transistor: source at \\(V_{DD}\\), gate at the fixed bias \\(V_{b2}\\), drain at \\(V_{out}\\).\n- \\(M_2\\) is an NMOS transistor: source at the fixed bias \\(V_{b1}\\), gate at \\(V_{in}\\), drain at \\(V_{out}\\).\n\n**Function**\n\\(M_2\\) is the common-source driver and \\(M_1\\) is its current-source (active) load. Because \\(V_{b2}\\) is a DC bias, \\(M_1\\) does not switch with the signal; only \\(M_2\\) is driven by \\(V_{in}\\). The stage is inverting.\n\n**Bias**\nWith \\(M_1\\) in saturation its current is set by its fixed gate-source voltage:\n\\[\nI_D=\\frac12\\mu_pC_{ox}\\!\\left(\\frac{W}{L}\\right)_1(V_{DD}-V_{b2}-|V_{tp}|)^2\n\\]\nand \\(M_2\\) must sink the same current, which fixes the required \\(V_{GS2}=V_{in}-V_{b1}\\). Both devices stay in saturation only for\n\\[\nV_{in}-V_{tn}\\le V_{out}\\le V_{b2}+|V_{tp}|.\n\\]\nOutside that window one device enters triode and the gain collapses. With finite output resistance the quiescent \\(V_{out}\\) is the intersection of the two output characteristics.\n\n**Small signal**\n\\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are AC grounds, so \\(M_1\\) contributes only \\(r_{o1}\\) and \\(M_2\\) is a grounded-source device:\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=-g_{m2}(r_{o1}\\parallel r_{o2}),\\qquad R_{out}=r_{o1}\\parallel r_{o2},\\qquad R_{in}\\approx\\infty.\n\\]\nThe gain is large because the load is a current source rather than a diode-connected device. Since \\(M_2\\)'s source is held at fixed \\(V_{b1}\\), body effect only shifts \\(V_{tn}\\); it adds no \\(g_{mb}\\) term in the signal path.",
        "format": "markdown",
        "sha256": "7ccd39911d49e7bcf47eda9582e15b25bf51a891308593859d2b8c2b3d4cdb92"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and treats the circuit as an inverting common-source stage. The figure is a non-inverting common-gate stage with Vin at M2’s source and low input resistance.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2298,
        "output_tokens": 3827,
        "total_tokens": 6125,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3292,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2298,
        "output_tokens": 3827,
        "total_tokens": 6125,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3292,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a single-stage common-source amplifier: an NMOS driver (\\(M_2\\)) with a PMOS current-source load (\\(M_1\\)).\n\n## Device identification\n- \\(M_1\\) is a PMOS. Its source is at \\(V_{DD}\\), its gate is held at the DC bias \\(V_{b2}\\), and its drain is the output node.\n- \\(M_2\\) is an NMOS. Its source is at the DC bias \\(V_{b1}\\), its gate is the signal input \\(V_{in}\\), and its drain is the output node.\n- \\(V_{out}\\) is taken at the common drain node. The symbols are three-terminal, so the body of each device is taken as tied to its source (no body effect).\n\n## Role of each transistor\nBecause \\(V_{b2}\\) is constant, \\(v_{sg1}=0\\) for any signal, so \\(M_1\\) contributes no signal current — it only sets the bias current and presents its output resistance \\(r_{o1}\\) at the output. \\(M_2\\) is the transconductance device: its source is at AC ground, so the full input appears as \\(v_{gs2}\\).\n\n## DC bias and region of operation\nBoth devices must be in saturation for high gain.\n\n- \\(M_1\\) is on and saturated when \\(V_{SG1}=V_{DD}-V_{b2}>|V_{tp}|\\) and\n  \\[\n  V_{out}\\le V_{DD}-|V_{ov1}|,\\qquad |V_{ov1}|=V_{DD}-V_{b2}-|V_{tp}|.\n  \\]\n  It then sets the bias current\n  \\[\n  I_D=\\tfrac12\\mu_p C_{ox}\\!\\left(\\tfrac{W}{L}\\right)_1(V_{DD}-V_{b2}-|V_{tp}|)^2.\n  \\]\n- \\(M_2\\) carries this same current. It is on and saturated when \\(V_{in}>V_{b1}+V_{tn}\\) and\n  \\[\n  V_{out}\\ge V_{in}-V_{tn}=V_{b1}+V_{ov2}.\n  \\]\n\nSo the high-gain output window is\n\\[\nV_{b1}+V_{ov2}\\le V_{out}\\le V_{DD}-|V_{ov1}|.\n\\]\n\\(V_{b2}\\) sets \\(I_D\\); the DC value of \\(V_{in}\\) (relative to \\(V_{b1}\\)) is chosen so \\(M_2\\) sinks exactly \\(I_D\\) while \\(V_{out}\\) sits inside that window.\n\n## Small-signal behavior\nWith both transistors saturated and \\(V_{b1}\\), \\(V_{b2}\\), \\(V_{DD}\\) at AC ground:\n\n- \\(v_{gs2}=v_{in}\\), so \\(M_2\\) injects \\(g_{m2}v_{in}\\) into the output node.\n- The resistance seen there is \\(r_{o1}\\parallel r_{o2}\\) (both gates and both sources are signal-grounded).\n\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=-g_{m2}\\,(r_{o1}\\parallel r_{o2}),\n\\]\n\\[\ng_{m2}=\\sqrt{2\\mu_n C_{ox}(W/L)_2\\,I_D},\\qquad r_{o}=\\frac{1}{\\lambda I_D}.\n\\]\n\n\\(R_{in}=\\infty\\) (MOS gate) and \\(R_{out}=r_{o1}\\parallel r_{o2}\\). The stage is inverting, and the gain is large because the load is a current source rather than a resistor. If channel-length modulation is neglected (\\(\\lambda=0\\)), \\(R_{out}\\to\\infty\\) and the saturation-region gain is ideally infinite — the finite gain comes entirely from \\(r_o\\).\n\n## Large-signal transfer characteristic\nWith \\(V_{b1}\\) and \\(V_{b2}\\) fixed:\n\n1. \\(V_{in}\\le V_{b1}+V_{tn}\\): \\(M_2\\) is cut off, no current flows, and \\(V_{out}\\) sits at \\(V_{DD}\\).\n2. \\(V_{in}\\) just above threshold: both devices saturate and \\(V_{out}\\) falls steeply with slope \\(\\approx -g_{m2}(r_{o1}\\parallel r_{o2})\\) — the amplification region.\n3. \\(V_{in}\\) large: \\(M_2\\) enters triode, \\(V_{out}\\) drops toward \\(V_{b1}\\), and the gain collapses. \\(M_1\\) remains saturated.\n\nThe result is the classic sharp inverting characteristic of a high-gain common-source stage, with the usable linear range limited to the saturation window above.",
        "format": "markdown",
        "sha256": "dd8e03b197f5c9b386ddae31aa2c82d3178926026226aae7e4641907320d491a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and identifies a common-source stage, whereas the circuit is common-gate with Vin at M2’s source. The golden solution explicitly assigns 0 for this topology error.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2298,
        "output_tokens": 12403,
        "total_tokens": 14701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2298,
        "output_tokens": 12403,
        "total_tokens": 14701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11344,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal circuit contains the five capacitors \\(C_{GS}\\), \\(C_{GD}\\), \\(C_{DB}\\), \\(C_{GD2}\\) and \\(C_{DB2}\\). Because the gate and source of \\(M_2\\) are AC grounds, the three capacitors \\(C_{DB}\\), \\(C_{GD2}\\) and \\(C_{DB2}\\) all lie in parallel between the output node and ground and therefore constitute only a single equivalent capacitance.\n\nThe resulting three capacitive branches interconnect exactly two nontrivial nodes (the gate node of \\(M_1\\) and the output node) and form one independent capacitor-only loop. The number of independent state variables is therefore \\(3-1=2\\). Equivalently, the \\(2\\times2\\) nodal capacitance matrix that appears in the frequency-domain nodal equations has full rank, so the determinant that yields the characteristic polynomial is exactly degree 2.\n\nHence the transfer function \\(V_\\text{out}(s)/V_\\text{in}(s)\\) has two poles.\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "6da3ddc8a188ed5399b03f1272993dd6c89ecea3cbcdc40b745ad9ef203e5bc5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two nontrivial nodes and assigns the capacitors to the gate and output nodes, with CGD coupling them. The network has two independent capacitor voltages, so the circuit has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2729,
        "output_tokens": 16360,
        "total_tokens": 19089,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16139,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2729,
        "output_tokens": 16360,
        "total_tokens": 19089,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16139,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a common-source stage (with parasitic device capacitances and an external source resistance) whose PMOS load has both its gate and source at AC ground. Consequently \\(C_{\\mathrm{DB}}\\), \\(C_{\\mathrm{DB2}}\\) and \\(C_{\\mathrm{GD2}}\\) all lie between the same pair of nodes and combine into a single capacitance.\n\nOnly two node voltages are unknown. Nodal analysis in the \\(s\\)-domain therefore produces a \\(2\\times 2\\) system matrix. The determinant of that matrix is a quadratic polynomial in \\(s\\) whose leading coefficient\n\\[\nC_{\\mathrm{GS}}(C_{\\mathrm{GD}}+C_L)+C_{\\mathrm{GD}}C_L\n\\]\nis nonzero. The network function consequently possesses exactly two poles.\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "79c0e625f9db1e94c0cf2ee8a5cb9d49dfcddbcca72cf1e65f9429bb475020d9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two unknown nodes and groups the output-to-ground capacitances at the output. The stated quadratic determinant supports the conclusion of two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2729,
        "output_tokens": 11274,
        "total_tokens": 14003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2729,
        "output_tokens": 11274,
        "total_tokens": 14003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of common-source transistor \\(M_1\\) with current-source load \\(M_2\\). In the small-signal regime the gate and source of \\(M_2\\) both lie at AC ground, so the only two nodes whose voltages are not fixed by independent sources or by ground connections are the gate node of \\(M_1\\) and the common drain/output node.\n\nThe five capacitors therefore possess only two independent voltages: every capacitor voltage is identically equal to one of those two node voltages or to their difference. Equivalently, the network contains three independent capacitor-only loops, so the number of natural frequencies is \\(5-3=2\\).\n\nThe same count is recovered from the nodal equations. With \\(V_\\text{in}\\) set to zero the two KCL equations are linear and homogeneous in the two node voltages and contain first derivatives only; the resulting characteristic polynomial is quadratic and its leading coefficient\n\\[\nC_\\text{GS}C_\\text{GD}+C_\\text{GS}C_L+C_\\text{GD}C_L\n\\]\n(\\(C_L=C_\\text{DB}+C_\\text{DB2}+C_\\text{GD2}\\)) is nonzero. The circuit therefore has exactly two poles.\n\nFinal answer: \\(2\\)",
        "format": "markdown",
        "sha256": "84f8a2aee9ecb6edfc3e5e490aebf171489e9b9318ef81123928b9a2103dfbb4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two dynamic nodes (M1’s gate and the output), assigns the capacitors to those nodes, and concludes the circuit has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2729,
        "output_tokens": 21226,
        "total_tokens": 23955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20955,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2729,
        "output_tokens": 21226,
        "total_tokens": 23955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20955,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a resistor-loaded NMOS inverter whose pull-down path is two stacked NMOS devices, \\(M_1\\) and \\(M_2\\), with both gates tied to \\(V_{in}\\).\n\n**Topology**\n- \\(R_D\\) is a passive pull-up from \\(V_{DD}\\) to the output node.\n- \\(M_2\\) (top) and \\(M_1\\) (bottom) are in series between \\(V_{out}\\) and ground.\n- Both gates are driven by the same input, so the two transistors switch together.\n\n**Logic operation**\n- \\(V_{in}\\) low: both devices are off, the path to ground is open, and \\(R_D\\) charges the output to \\(V_{DD}\\). Output is high.\n- \\(V_{in}\\) high (above threshold): both devices turn on and discharge the output toward ground. Output is low.\n\nSo the gate implements logical inversion, \\(V_{out}=\\overline{V_{in}}\\).\n\n**Important nonideal effects**\n- Series stacking roughly doubles the pull-down resistance versus a single device of the same size, so \\(V_{OL}\\) is higher (or each device must be made wider to restore the same low level).\n- \\(M_2\\)’s source sits above ground, so with the body at substrate/ground it suffers body effect: its threshold rises and it conducts more weakly than \\(M_1\\).\n- When the output is low, a static current flows from \\(V_{DD}\\) through \\(R_D\\) and the two MOSFETs, so the circuit dissipates DC power in that state. The high level is a full \\(V_{DD}\\) only because the load is a resistor and both drivers are off.",
        "format": "markdown",
        "sha256": "d1fe609d14da6192ea7939b2663da6ae874866a6f59538a59a3d931bd21ede49"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the common-gate series NMOS stack and basic inverter behavior, and notes a roughly doubled pull-down resistance. But it misses the central result: M1 is in triode while M2 is saturated, so the pair behaves approximately like one NMOS with an effective channel length of L1 + L2.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2468,
        "output_tokens": 1742,
        "total_tokens": 4210,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1374,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2468,
        "output_tokens": 1742,
        "total_tokens": 4210,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1374,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a resistive-load NMOS inverter whose pull-down is a series stack of two NMOS devices, \\(M_1\\) and \\(M_2\\), with both gates tied to \\(V_{in}\\).\n\n## Topology\n- \\(R_D\\) is the pull-up from \\(V_{DD}\\) to \\(V_{out}\\).\n- \\(M_2\\) is on top: drain at \\(V_{out}\\), source at an intermediate node \\(V_X\\), gate at \\(V_{in}\\).\n- \\(M_1\\) is on the bottom: drain at \\(V_X\\), source at ground, gate at \\(V_{in}\\).\n- Both devices carry the same current. The schematic arrows identify both as NMOS.\n\nIt implements the same logic function as a single-driver NMOS inverter (a NOT gate), but the stack changes the low level, the switching threshold, and the gain.\n\n## Large-signal behavior\n**\\(V_{in}\\) low** (\\(V_{in}<V_t\\)): both transistors are off, no current flows in \\(R_D\\), and\n\\[\nV_{out}=V_{DD}.\n\\]\n\n**\\(V_{in}\\) high**: both devices turn on and pull \\(V_{out}\\) down. The low level is set by the divider between \\(R_D\\) and the on-resistance of the stack, so \\(V_{OL}>0\\). Two effects make the stack a weaker pull-down than one device of the same size:\n\n- \\(M_2\\) is source-degenerated. Its gate-source voltage is only\n  \\[\n  V_{GS2}=V_{in}-V_X,\n  \\]\n  so \\(M_2\\) conducts only while \\(V_X<V_{in}-V_{t2}\\).\n- If the bodies sit at ground (the usual IC case), \\(V_{SB2}=V_X>0\\) raises \\(V_{t2}\\) by the body effect, which further reduces \\(M_2\\)'s overdrive.\n\n\\(M_1\\), with \\(V_{GS1}=V_{in}\\) and its source at ground, is the stronger device and sets most of the current; \\(M_2\\) mainly drops voltage and limits how low \\(V_X\\) (and therefore \\(V_{out}\\)) can go.\n\n**Transition region:** as \\(V_{in}\\) rises through a threshold set by \\(V_t\\) and the \\(R_D\\)–stack ratio, current increases and \\(V_{out}\\) falls from \\(V_{DD}\\) toward \\(V_{OL}\\). Because the two devices share one \\(V_{in}\\) but have different source voltages, the trip point is higher and the transition is softer than for a single bottom device of the same width.\n\n## Small-signal view of the gain region\nIn the steep part of the transfer curve the stack acts as one nonlinear pull-down. \\(M_1\\) converts \\(v_{in}\\) into current with its source grounded; \\(M_2\\) has \\(v_{gs2}=v_{in}-v_x\\) and is degenerated by \\(M_1\\). The effective transconductance of the stack is therefore well below \\(g_{m1}\\) or \\(g_{m2}\\) alone, and the voltage gain is\n\\[\nA_v \\approx -g_{m,\\text{stack}}\\,(R_D \\parallel r_{o,\\text{stack}}),\n\\]\nsmaller in magnitude than the gain of a single-driver resistive-load inverter. The series connection does raise the small-signal resistance seen at \\(V_{out}\\), which partially offsets the loss in \\(g_m\\).\n\n## What the stack is for\nWith no component values given, the circuit is best read as a logic inverter whose driver was deliberately split into two series NMOS transistors. Relative to a single pull-down device, that:\n\n- cuts the pull-down current (longer effective channel, or a stand-in for a long device),\n- raises \\(V_{OL}\\) and the switching threshold,\n- introduces body effect and source degeneration on \\(M_2\\),\n- reduces \\(|A_v|\\) in the transition region.\n\nIt is not a cascode: in a cascode the upper gate would be at a fixed bias, not tied to \\(V_{in}\\).",
        "format": "markdown",
        "sha256": "76e9405c44089957ada41c2cd0777e559e94a33771b2830c277b8ea6b35ac8c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies the common-gate series NMOS stack and its longer-effective-channel role. The additional inverter and gain discussion does not contradict that central conclusion.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2468,
        "output_tokens": 3409,
        "total_tokens": 5877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2484,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2468,
        "output_tokens": 3409,
        "total_tokens": 5877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2484,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a resistive-load common-source stage whose pull-down is a series stack of two identical NMOS devices with a common gate drive. Under the square-law model it collapses exactly to an ordinary NMOS inverter with half the device strength.\n\n## Topology\n\n- \\(M_1\\) and \\(M_2\\) are both enhancement NMOS, in series between the output node and ground, with both gates tied to \\(V_\\text{in}\\).\n- \\(R_D\\) is the pull-up to \\(V_{DD}\\); \\(V_\\text{out}\\) is taken at the drain of \\(M_2\\).\n- The source arrow on each device is at its own source, so each body is tied to its source: \\(V_{SB}=0\\) and there is no body effect. (If this were an integrated pair with both bodies in a grounded substrate, \\(M_2\\) would suffer body effect and the equivalence below would not hold.)\n\n## Series-stack equivalence\n\nAssume matched devices, \\(k_{n1}=k_{n2}=k_n=\\mu_n C_{ox}W/L\\), threshold \\(V_t\\), and neglect channel-length modulation. With the gates tied together and each body at its source, the stack is exactly equivalent to a single NMOS with the same \\(V_t\\) and\n\n\\[\nk_{n,\\text{eq}}=\\frac{k_n}{2}\n\\]\n\n(i.e. \\(W/L\\) halved, or \\(L\\) doubled). Two checks confirm it:\n\n- Both triode (\\(V_\\text{out}<V_\\text{in}-V_t\\)): solving the two triode equations for the intermediate source/drain node gives \\(I_D=(k_n/2)\\big[(V_\\text{in}-V_t)V_\\text{out}-V_\\text{out}^2/2\\big]\\), which is precisely the triode law of a device with \\(k_n/2\\).\n- Upper device saturated (\\(V_\\text{out}\\ge V_\\text{in}-V_t\\)): the bottom device is forced into triode, the intermediate voltage settles at \\(V_X=(1-1/\\sqrt{2})(V_\\text{in}-V_t)\\approx0.293(V_\\text{in}-V_t)\\), and \\(I_D=(k_n/4)(V_\\text{in}-V_t)^2=(1/2)(k_n/2)(V_\\text{in}-V_t)^2\\), the saturation law of the same equivalent device.\n\nSo the circuit is just the classic resistive-load NMOS inverter with pull-down parameter \\(k_n/2\\). The two transistors can never be in saturation simultaneously: any nonzero current puts \\(M_1\\) in triode, while \\(M_2\\) saturates only while \\(V_\\text{out}\\ge V_\\text{in}-V_t\\).\n\n## Voltage transfer characteristic\n\nWith \\(V_{OV}=V_\\text{in}-V_t\\):\n\n1. Cutoff, \\(V_\\text{in}\\le V_t\\): \\(I_D=0\\), so \\(V_\\text{out}=V_{DD}\\). Hence \\(V_{OH}=V_{DD}\\).\n\n2. Saturation of the equivalent device, \\(V_\\text{in}>V_t\\) and \\(V_\\text{out}\\ge V_\\text{in}-V_t\\):\n\\[\nI_D=\\frac{k_n}{4}(V_\\text{in}-V_t)^2,\\qquad V_\\text{out}=V_{DD}-\\frac{k_n R_D}{4}(V_\\text{in}-V_t)^2.\n\\]\nThis holds up to the boundary \\(V_\\text{out}=V_\\text{in}-V_t\\), i.e. up to \\(V_\\text{in}=V_t+z^\\*\\) where \\(z^\\*=2\\big[-1+\\sqrt{1+k_n R_D V_{DD}}\\big]/(k_n R_D)\\).\n\n3. Triode, \\(V_\\text{out}\\le V_\\text{in}-V_t\\):\n\\[\n\\frac{V_{DD}-V_\\text{out}}{R_D}=\\frac{k_n}{2}\\Big[(V_\\text{in}-V_t)V_\\text{out}-\\frac{V_\\text{out}^2}{2}\\Big].\n\\]\n\nLogic levels from this curve:\n\n- Switching threshold (\\(V_\\text{in}=V_\\text{out}=V_M\\)), which falls in the saturation region:\n\\[\nV_M=V_t+\\frac{2}{k_n R_D}\\Big[-1+\\sqrt{1+k_n R_D(V_{DD}-V_t)}\\Big].\n\\]\n- \\(V_{OL}\\) at \\(V_\\text{in}=V_{DD}\\) (triode). For a strong pull-down, neglecting the \\(V_{OL}^2\\) term,\n\\[\nV_{OL}\\approx\\frac{V_{DD}}{1+(k_n R_D/2)(V_{DD}-V_t)}.\n\\]\n- The slope is \\(-1\\) at \\(V_{IL}=V_t+2/(k_n R_D)\\) (saturation region, provided \\(V_{DD}\\ge3/(k_n R_D)\\)); \\(V_{IH}\\) is the corresponding slope-\\(-1\\) point in the triode region. Noise margins are \\(NM_L=V_{IL}-V_{OL}\\) and \\(NM_H=V_{OH}-V_{IH}\\).\n\n## Small-signal behavior\n\nBiased in saturation the equivalent device has\n\\[\ng_m=k_{n,\\text{eq}}(V_{GS}-V_t)=\\frac{k_n}{2}(V_\\text{in}-V_t)=\\sqrt{k_n I_D},\n\\]\nso with no channel-length modulation the gain is\n\\[\nA_v=-g_m R_D=-\\frac{k_n R_D}{2}(V_\\text{in}-V_t).\n\\]\nThe stage must be biased with \\(V_\\text{out}>V_\\text{in}-V_t\\) to stay in this high-gain region. Including \\(\\lambda\\), stacking raises the effective output resistance of the pull-down, but the gain is still set by \\(R_D\\) unless \\(R_D\\) approaches that resistance.\n\n## Summary\n\nFunctionally it is an inverting common-source stage: \\(V_\\text{out}=V_{DD}\\) for \\(V_\\text{in}<V_t\\) and falls toward a small \\(V_{OL}\\) as \\(V_\\text{in}\\) rises. The gate-tied series stack does not change the shape of the characteristic relative to a single driver; it only halves \\(k_n\\), which weakens the pull-down, raises \\(V_{OL}\\), shifts \\(V_M\\), and halves \\(g_m\\) (and therefore the gain) compared with one device of parameter \\(k_n\\).",
        "format": "markdown",
        "sha256": "0a73d54a61ecec330080f72b1365809baef442212a2b34f5628b1bebd5defec0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS stack and concludes it has approximately twice the effective channel length (half the device strength). It also captures the lower-device triode and upper-device saturation behavior; the ideal-model and body-effect qualifications do not undermine the essential answer.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2468,
        "output_tokens": 14023,
        "total_tokens": 16491,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12443,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2468,
        "output_tokens": 14023,
        "total_tokens": 16491,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12443,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source-coupled differential pair with a single-ended resistive load. \\(M_1\\) and \\(M_2\\) share a tail current sink \\(I_1\\); \\(V_{in}\\) drives \\(M_1\\), \\(V_b\\) is a DC reference on \\(M_2\\), and \\(V_{out}\\) is taken only from \\(M_2\\)’s drain. \\(M_1\\)’s drain is tied to \\(V_{DD}\\) and does not set the output.\n\n### Large-signal behavior\nThe tail enforces\n\\[\nI_{D1}+I_{D2}=I_1.\n\\]\nWith matched devices and \\(V_{in}=V_b\\), the pair is balanced:\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2},\\qquad V_{out}=V_{DD}-\\frac{I_1}{2}R_D.\n\\]\nRaising \\(V_{in}\\) above \\(V_b\\) steers current into \\(M_1\\) and out of \\(M_2\\), so the drop on \\(R_D\\) falls and \\(V_{out}\\) rises. The transfer is therefore non-inverting. Both devices conduct only for\n\\[\n|V_{in}-V_b|<\\sqrt{2}\\,V_{OV},\n\\]\nwhere \\(V_{OV}=V_{GS}-V_t\\) is the equilibrium overdrive at \\(I_D=I_1/2\\). Outside that window the pair is fully steered: \\(V_{out}\\to V_{DD}\\) if \\(V_{in}\\gg V_b\\), and \\(V_{out}\\to V_{DD}-I_1 R_D\\) if \\(V_{in}\\ll V_b\\).\n\n### Small-signal gain\nWith \\(V_b\\) an AC ground and an ideal tail source, the source node sits at \\(v_{in}/2\\). Then\n\\[\ni_{d2}=-\\frac{g_m}{2}v_{in},\\qquad A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_m R_D}{2},\n\\]\nwhere \\(g_m\\) is evaluated at \\(I_D=I_1/2\\). Body effect does not change this result: it raises the effective transconductance of both devices equally and cancels at the coupled sources. Finite \\(r_o\\) lowers the gain slightly and makes\n\\[\nR_{out}\\approx R_D\\parallel r_{o2}\n\\]\n(plus a weak contribution from the source network).\n\n### Bias constraints\n- Both MOSFETs must stay in saturation: \\(V_{DS}>V_{OV}\\). That is automatic for \\(M_1\\) (\\(V_D=V_{DD}\\)), but \\(V_{out}\\) must remain above \\(V_S+V_{OV2}\\).\n- The tail source needs compliance: \\(V_S=V_b-V_{GS2}\\) must stay high enough for \\(I_1\\) to remain a stiff sink.\n- Because \\(V_{DS1}\\neq V_{DS2}\\), channel-length modulation unbalances the quiescent currents and creates a systematic offset that a symmetric or current-mirror load would avoid.\n\n### Practical limitations\n- Gain is half that of a fully differential resistively loaded pair, since only one drain current is converted to voltage.\n- Supply gain is about 1: \\(V_{DD}\\) noise appears directly at \\(V_{out}\\), so PSRR is poor.\n- Common-mode rejection of a disturbance common to \\(V_{in}\\) and \\(V_b\\) is high only while \\(I_1\\) is an ideal current source; a real tail impedance sets the CMRR.",
        "format": "markdown",
        "sha256": "99e43fc9c34b0fd1d4e931597664ea3798fc63d8a9b6f09b36934e9d8d02c838"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, its gate and drain connections, and the non-inverting gain. This satisfies the golden solution’s full-credit rule; secondary details do not undermine the essential analysis.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3190,
        "output_tokens": 4949,
        "total_tokens": 8139,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4143,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3190,
        "output_tokens": 4949,
        "total_tokens": 8139,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4143,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source-coupled (differential) pair \\(M_1\\)–\\(M_2\\) with tail bias \\(I_1\\), drawn so that it is also a source follower driving a common-gate stage. \\(M_1\\) has its drain at AC ground (\\(V_{DD}\\)) and its gate as the signal input, so it is a source follower. \\(M_2\\) has its gate held at the fixed bias \\(V_b\\) and a resistive load \\(R_D\\) at its drain, so it is a common-gate stage. \\(V_{out}\\) is single-ended.\n\n**Large-signal behavior.** \\(I_1\\) is steered between the two devices by \\(V_{in}-V_b\\):\n\n- \\(V_{in}=V_b\\) (matched devices): \\(I_{D1}=I_{D2}=I_1/2\\), so \\(V_{out}=V_{DD}-I_1 R_D/2\\).\n- \\(V_{in}\\gg V_b\\): \\(M_2\\) turns off and \\(V_{out}\\to V_{DD}\\).\n- \\(V_{in}\\ll V_b\\): \\(M_1\\) turns off, \\(I_{D2}=I_1\\), and \\(V_{out}=V_{DD}-I_1 R_D\\).\n\n\\(M_1\\) stays in saturation whenever it is on (its drain is at \\(V_{DD}\\)). \\(M_2\\) stays in saturation only while \\(V_{out}\\ge V_b-V_{th}\\).\n\n**Small-signal gain.** With both devices in saturation and the tail current source an AC open, KCL at the common source node gives\n\\[\nv_s=\\frac{g_{m1}}{g_{m1}+g_{m2}}\\,v_{in}.\n\\]\nThe common-gate device then produces\n\\[\nv_{out}=g_{m2}R_D\\,v_s,\n\\]\nso\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D.\n\\]\nFor matched transistors biased at \\(I_1/2\\), \\(g_{m1}=g_{m2}=g_m\\) and\n\\[\nA_v=+\\frac{g_m R_D}{2}.\n\\]\nThe gain is non-inverting: raising \\(V_{in}\\) raises the common source, reduces \\(V_{GS2}\\) and \\(I_{D2}\\), and therefore raises \\(V_{out}\\). If the bodies are grounded, the \\(g_{mb}\\) terms cancel in the matched case and the same result is obtained. Channel-length modulation is neglected (\\(r_o\\to\\infty\\)); including it, the load is \\(R_D\\parallel r_{o2}\\).\n\n**Ports.** The input resistance is essentially infinite (MOS gate). The output resistance is \\(R_D\\parallel r_{o2}\\approx R_D\\).",
        "format": "markdown",
        "sha256": "27d6940a08517a4f70d50b4a0c0d0b984b7fbe0eecb0bfd7416f3ac2e2afd94d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair as a source follower driving a common-gate stage and gives the correct non-inverting small-signal gain under the stated ideal assumptions.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3190,
        "output_tokens": 5775,
        "total_tokens": 8965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3190,
        "output_tokens": 5775,
        "total_tokens": 8965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5106,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source-coupled (differential) pair with a single-ended output. \\(M_1\\) and \\(M_2\\) share a source node biased by the tail current \\(I_1\\); \\(M_1\\)’s drain is tied directly to \\(V_{DD}\\), while \\(M_2\\)’s drain is loaded by \\(R_D\\) and is the output.\n\n## Large-signal behavior\n\nThe tail current splits between the two devices according to the gate voltages:\n\\[\nI_1 = I_{D1} + I_{D2}, \\qquad V_{out} = V_{DD} - I_{D2}R_D.\n\\]\n- If \\(V_{in}=V_b\\) and the devices are matched, \\(I_{D1}=I_{D2}=I_1/2\\), so \\(V_{out}=V_{DD}-(I_1/2)R_D\\).\n- Raising \\(V_{in}\\) steers current into \\(M_1\\), so \\(I_{D2}\\) falls and \\(V_{out}\\) rises toward \\(V_{DD}\\).\n- Lowering \\(V_{in}\\) steers current into \\(M_2\\), so \\(V_{out}\\) falls toward \\(V_{DD}-I_1R_D\\).\n\nThe stage is therefore **non-inverting**: \\(V_{out}\\) moves in the same direction as \\(V_{in}\\).\n\n## Small-signal gain\n\nWith \\(V_b\\) an AC ground, both devices in saturation, and \\(r_o\\) and body effect neglected, KCL at the source node gives\n\\[\nv_s=\\frac{g_{m1}}{g_{m1}+g_{m2}}v_{in}.\n\\]\nThe resulting drain current of \\(M_2\\) through \\(R_D\\) produces\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D.\n\\]\nAt the balanced bias point (\\(g_{m1}=g_{m2}=g_m\\)) this reduces to\n\\[\nA_v=\\frac{g_m R_D}{2}.\n\\]\n(The factor of \\(1/2\\) appears because a single-ended input equals a differential component \\(v_{in}/2\\) plus a common-mode component that the pair rejects; the differential-to-single-ended gain \\(g_mR_D\\) then yields \\(g_mR_D/2\\).)\n\n## Saturation limits\n\n- \\(M_1\\): \\(V_{DS1}=V_{DD}-V_S\\) is large, so it stays in saturation as long as \\(V_{DD}>V_{in}-V_t\\).\n- \\(M_2\\): needs \\(V_{out}>V_b-V_t\\). With the full tail steered into \\(M_2\\), this requires \\(V_{DD}-I_1R_D>V_b-V_t\\).\n- \\(V_{out}\\) swings between \\(V_{DD}-I_1R_D\\) and \\(V_{DD}\\), provided the current source remains in compliance.",
        "format": "markdown",
        "sha256": "d30df39218bd9f92cdcf03ec35c279ffba8d7b08de889d2ad6baffe69e0e90a4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair and its single-ended output, and gives the correct non-inverting gain and current-steering behavior.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3190,
        "output_tokens": 3772,
        "total_tokens": 6962,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3064,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3190,
        "output_tokens": 3772,
        "total_tokens": 6962,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3064,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source follower \\(M_1\\) (drain at \\(V_{DD}\\)) biased by the current source \\(M_2\\). The small-signal output impedance is found by AC-grounding the input, so that the gate of \\(M_1\\) is returned to ground only through \\(R_S\\).\n\nNeglecting channel-length modulation, body effect and all capacitances other than \\(C_{gs}\\), KCL on the small-signal model produces\n\\[\nZ_\\text{out}(s)=\\frac{1+s R_S C_{gs}}{g_m+s C_{gs}}.\n\\]\nThe zero therefore lies at a lower frequency than the pole precisely when \\(R_S>1/g_m\\). Between those two frequencies the phase of \\(Z_\\text{out}\\) is positive, i.e., the impedance is inductive. (The same conclusion follows by direct evaluation of \\(\\operatorname{Im}(Z_\\text{out})\\), which is proportional to \\(g_m R_S-1\\).)\n\nA parallel resistive contribution from \\(M_2\\) does not remove the frequency range in which the imaginary part remains positive, so the output impedance of the circuit can be inductive.\n\nFinal answer: \\(Z_{out}=(1+s R_S C_{gs})/(g_m+s C_{gs})\\) (inductive for \\(R_S>1/g_m\\))",
        "format": "markdown",
        "sha256": "72c78659b009136f39ef85c08485949732b91d33f279cda87b4bcbcdc448da59"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower, derives the appropriate output-impedance expression, and explains that the zero precedes the pole for RS > 1/gm, giving positive phase and inductive behavior. The stated modeling assumptions and M2 loading note are consistent.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2603,
        "output_tokens": 14472,
        "total_tokens": 17075,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2603,
        "output_tokens": 14472,
        "total_tokens": 17075,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source follower (\\(M_1\\)) biased by the current source \\(M_2\\). With the input AC-grounded, the impedance seen at the source of \\(M_1\\) (which dominates \\(Z_\\text{out}\\)) is\n\\[\nZ_\\text{out}\\approx\\frac{1+sR_SC_{gs}}{g_m+sC_{gs}}\n\\]\n(neglecting body effect, \\(C_{gd}\\) and the high parallel impedance of \\(M_2\\)).\n\nThe zero lies below the pole precisely when \\(R_S>1/g_m\\). Consequently \\(\\operatorname{Im}(Z_\\text{out})>0\\) for all frequencies between the zero and the pole, i.e., the output impedance is inductive.\n\nFinal answer: \\(Z_\\text{out}\\approx(1+s R_S C_{gs})/(g_m+s C_{gs})\\) (inductive for \\(R_S>1/g_m\\))",
        "format": "markdown",
        "sha256": "b5769290ea2edf1d623403efc83949e99c0fc89642544e888d2407e448fcd5e1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower, gives the appropriate output-impedance expression, and explains that a zero below the pole (when RS > 1/gm) produces positive imaginary impedance and inductive behavior. The endpoint transition follows directly from the expression.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2603,
        "output_tokens": 16419,
        "total_tokens": 19022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16199,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2603,
        "output_tokens": 16419,
        "total_tokens": 19022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16199,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS source follower (\\(M_1\\)) biased by the current source \\(M_2\\). The output impedance is found with \\(V_\\text{in}\\) AC-grounded, so the gate of \\(M_1\\) is returned to ground only through \\(R_S\\).\n\nRetaining \\(g_m\\) and \\(C_{gs}\\) (and neglecting \\(C_{gd}\\), \\(r_o\\), body effect and the impedance of \\(M_2\\)) yields\n\\[\nZ_\\text{out}(s)=\\frac{1+s R_S C_{gs}}{g_m+s C_{gs}}.\n\\]\nThe imaginary part of \\(Z_\\text{out}(j\\omega)\\) is positive at all frequencies precisely when \\(R_S>1/g_m\\). Thus \\(Z_\\text{out}\\) is inductive for a sufficiently large gate resistance. (Equivalently, at frequencies well below \\(g_m/C_{gs}\\) one may write \\(Z_\\text{out}\\approx 1/g_m+sL\\) with the inductance \\(L=R_S C_{gs}/g_m>0\\).)\n\nFinal answer: \\(Z_\\text{out}\\approx1/g_m+s(R_S C_{gs}/g_m)\\) (inductive for \\(R_S>1/g_m\\))",
        "format": "markdown",
        "sha256": "4dc36d314947279491679cc115d31a54e80200f88e6f04b52b56ac0adfd369b8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The topology, exact output-impedance expression, and inductive condition are correct. However, the stated low-frequency inductance omits the term \u0002-C_{gs}/g_m^2\u0002: the correct value is \u0002C_{gs}(R_S-1/g_m)/g_m\u0002, so the approximation is materially inaccurate near the threshold.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2603,
        "output_tokens": 14257,
        "total_tokens": 16860,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13955,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2603,
        "output_tokens": 14257,
        "total_tokens": 16860,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13955,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a positive-feedback latch, not a linear amplifier. Both devices are NMOS with grounded sources, and the only bounded, stable state is \\(V_{out}=V_{DD}\\).\n\n## Topology\n\n- \\(M_1\\): gate at node \\(X\\), drain at the \\(V_{out}\\) node, source at ground. With \\(R_{D1}\\) it is a common-source stage loaded by \\(R_{D1}\\).\n- \\(M_2\\): gate at \\(V_{out}\\), drain at node \\(X\\), source at ground — a second common-source stage.\n- \\(I_{in}\\) (arrow upward) injects current into node \\(X\\); \\(M_2\\) is the only path that can remove it. So in any DC state, \\(I_{D2}=I_{in}\\).\n- \\(V_{out}=V_{DD}-I_{D1}R_{D1}\\), since \\(M_2\\)'s gate draws no current.\n\n## Why the bias point is unstable\n\nKCL at \\(X\\) forces \\(I_{D2}=I_{in}\\), which suggests the equilibrium\n\\[\nV_{out}=V_{th2}+\\sqrt{\\frac{2I_{in}}{\\mu_n C_{ox}(W/L)_2}},\n\\]\nwith \\(V_X=V_{GS1}\\) then set by \\(I_{D1}=(V_{DD}-V_{out})/R_{D1}\\). But the loop around it is regenerative. Breaking the loop at \\(M_2\\)'s gate and injecting \\(v_t\\):\n\n\\[\n\\frac{v_x}{v_t}=-g_{m2}r_{o2},\\qquad \\frac{v_{out}}{v_x}=-g_{m1}(R_{D1}\\parallel r_{o1}),\n\\]\n\nso the loop gain is\n\\[\nT=g_{m1}g_{m2}r_{o2}(R_{D1}\\parallel r_{o1})\\;\\gg\\;1\n\\]\nand **positive** (two common-source inversions). The equilibrium is unstable and the circuit rails.\n\n## Stable state\n\nThe only self-consistent bounded state is the upper rail:\n\n- \\(M_1\\) off \\(\\Rightarrow I_{D1}=0\\Rightarrow V_{out}=V_{DD}\\).\n- \\(M_2\\) then has \\(V_{GS}=V_{DD}\\) and operates in deep triode, absorbing \\(I_{in}\\) at a small drain voltage:\n\\[\nV_X\\approx\\frac{I_{in}}{\\mu_n C_{ox}(W/L)_2\\,(V_{DD}-V_{th2})}.\n\\]\n- This holds as long as \\(V_X<V_{th1}\\), i.e.\n\\[\nI_{in}<V_{th1}\\,\\mu_n C_{ox}(W/L)_2\\,(V_{DD}-V_{th2}),\n\\]\nwhich is satisfied for any ordinary bias current, so \\(M_1\\) indeed stays cut off.\n\nThe opposite rail (\\(V_{out}\\) low, \\(M_2\\) off) is not a bounded state with an ideal current source: with \\(M_2\\) off, \\(I_{in}\\) has nowhere to leave node \\(X\\), so \\(V_X\\) climbs without limit. Only the finite compliance of a real current source would cap it, creating a second, compliance-limited state. With the ideal elements drawn, the circuit settles at \\(V_{out}=V_{DD}\\), \\(M_1\\) cut off, \\(M_2\\) in triode.",
        "format": "markdown",
        "sha256": "ad6cca9d733cd5f7d7b6ecde49aae16be0495a0b3083a2b02b91a9d5e83e884d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2 as controlled by Vout, recognizes the positive-feedback loop, and explains the unstable linear bias and latching behavior. Its upper-rail and compliance-limit discussion is consistent with the ideal-versus-real current-source distinction.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2992,
        "output_tokens": 12171,
        "total_tokens": 15163,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11383,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2992,
        "output_tokens": 12171,
        "total_tokens": 15163,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11383,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a cross-coupled NMOS pair — a regenerative (positive-feedback) bistable cell, i.e. a current-driven latch / Schmitt trigger — not a linear amplifier.\n\n## Connections\n\n- \\(M_1\\): gate = node \\(X\\), drain = \\(V_{out}\\), source = ground, drain load \\(R_{D1}\\) to \\(V_{DD}\\).\n- \\(M_2\\): drain = node \\(X\\), gate = \\(V_{out}\\), source = ground.\n- \\(I_{in}\\) injects current into node \\(X\\).\n\nSo each gate is tied to the other device’s drain: \\(V_{G1}=V_{D2}=V_X\\) and \\(V_{G2}=V_{D1}=V_{out}\\). Both sources are grounded, so \\(V_{SB}=0\\) (no body effect).\n\n## KCL constraints (always true at DC)\n\nSince the gates draw no current:\n\n\\[\nI_{D2}=I_{in}, \\qquad I_{D1}=\\frac{V_{DD}-V_{out}}{R_{D1}}.\n\\]\n\n## Feedback polarity — the interior bias point is unstable\n\nEach transistor is a common-source stage, so each contributes one inversion. Two inversions in the loop make the feedback **positive**. Linearizing about a point where both devices are in saturation (small-signal parameters \\(g_{m1},r_{o1},g_{m2},r_{o2}\\), with \\(R_L=R_{D1}\\parallel r_{o1}\\)):\n\n\\[\nC_X\\dot v_X=i_{in}-g_{m2}v_{out}-\\frac{v_X}{r_{o2}}, \\qquad C_o\\dot v_{out}=-g_{m1}v_X-\\frac{v_{out}}{R_L}.\n\\]\n\nThe Jacobian has a negative trace but a **negative determinant**,\n\n\\[\n\\det J \\propto \\frac{1}{r_{o2}R_L}-g_{m1}g_{m2}<0,\n\\]\n\nbecause the loop gain\n\n\\[\nT = g_{m1}R_L\\cdot g_{m2}r_{o2}\n\\]\n\nis positive and \\(\\gg 1\\). A negative determinant means one positive real eigenvalue: the equilibrium is a saddle. Equivalently, breaking the loop at \\(M_2\\)’s gate and driving it with \\(v_s\\) (\\(i_{in}=0\\)) returns\n\n\\[\n\\frac{v_{out}}{v_s}=+g_{m1}g_{m2}R_L r_{o2}\\gg +1.\n\\]\n\nSo the circuit regenerates; it will not sit at the simultaneous-saturation point.\n\nThat unstable point, for reference only, would be (square law, \\(I_D=\\tfrac{\\beta}{2}(V_{GS}-V_t)^2\\), \\(\\beta=\\mu_n C_{ox}W/L\\))\n\n\\[\nV_{out}=V_t+\\sqrt{\\frac{2I_{in}}{\\beta_2}},\\qquad V_X=V_t+\\sqrt{\\frac{2I_{D1}}{\\beta_1}},\n\\]\n\nand the apparent small-signal slope \\(v_{out}/i_{in}\\approx 1/g_{m2}\\) is only the slope **at this unstable point** — it is not a usable gain.\n\n## Bistable behavior\n\nRegeneration drives the circuit to a rail state where the loop is broken (a device off or in deep triode, so \\(T<1\\)) and it latches. Because \\(M_2\\) must carry \\(I_{in}\\), \\(V_{out}>V_t\\) in every DC state.\n\n- **High state** (\\(M_1\\) cut off): \\(V_{out}=V_{DD}\\), \\(M_2\\) in triode carrying \\(I_{in}\\) with \\(V_{GS2}=V_{DD}\\) and \\(V_X\\le V_t\\). It exists only while \\(M_2\\) can pass \\(I_{in}\\) at \\(V_{DS2}\\le V_t\\):\n\n\\[\nI_{in}\\le I_{\\text{crit,H}}=\\beta_2\\!\\left[(V_{DD}-V_t)V_t-\\frac{V_t^2}{2}\\right].\n\\]\n\n  It is stable because \\(M_1\\) is off (\\(g_{m1}=0\\)), so the loop gain is zero.\n\n- **Low state** (\\(M_1\\) on, triode): \\(M_1\\) pulls \\(V_{out}\\) down and \\(M_2\\), gated by that low \\(V_{out}\\), still carries \\(I_{in}\\). \\(M_1\\) in triode keeps the loop gain below 1, so this state is stable. It exists only above a lower critical current \\(I_{\\text{crit,L}}\\).\n\nFor \\(I_{\\text{crit,L}}<I_{in}<I_{\\text{crit,H}}\\) both states exist, so the \\(V_{out}\\) vs. \\(I_{in}\\) characteristic has **hysteresis**. Crossing \\(I_{\\text{crit,H}}\\) upward turns \\(M_1\\) on and the positive feedback snaps the cell to the low state; falling below \\(I_{\\text{crit,L}}\\) snaps it back to the high state.",
        "format": "markdown",
        "sha256": "7df52b9d8faedf4b5e83ed2739e59e91529d0b9fcda7efe0a39536832b9490aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as tied to Vout, the positive-feedback loop through M1 and M2, and the resulting unstable linear bias and latching behavior. This meets the golden solution’s explicit full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2992,
        "output_tokens": 26671,
        "total_tokens": 29663,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25495,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2992,
        "output_tokens": 26671,
        "total_tokens": 29663,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25495,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The schematic is a two-transistor loop, and it is regenerative, not a linear amplifier.\n\n## Connections\n\n- Both devices are grounded-source NMOS (sources at ground, body-effect absent).\n- \\(I_{in}\\) is injected into node \\(X\\), which is the gate of \\(M_1\\) and the drain of \\(M_2\\). So in DC, \\(M_2\\) is the only path for \\(I_{in}\\): \\(I_{D2}=I_{in}\\).\n- \\(V_{out}\\) is the drain of \\(M_1\\) (pulled up by \\(R_{D1}\\) to \\(V_{DD}\\)) and the gate of \\(M_2\\).\n\nEach device is therefore a common-source stage, and each drives the other's input: \\(X \\xrightarrow{M_1} V_{out} \\xrightarrow{M_2} X\\).\n\n## Feedback polarity\n\nA grounded-source stage inverts, so the loop contains two inversions. That is positive (regenerative) feedback. There is no way to get negative feedback here, because both devices can only sink current from their drain nodes.\n\n## DC equilibrium\n\nNeglecting channel-length modulation and assuming saturation, \\(M_2\\) sets the output directly from the current forced through it:\n\n\\[\nV_{out}=V_t+\\sqrt{\\frac{2I_{in}}{k_{n2}}},\\qquad k_{n2}=\\mu_n C_{ox}\\!\\left(\\frac{W}{L}\\right)_2\n\\]\n\n\\(M_1\\) then carries whatever \\(R_{D1}\\) sets, which fixes the drain voltage of \\(M_2\\):\n\n\\[\nI_{D1}=\\frac{V_{DD}-V_{out}}{R_{D1}},\\qquad V_X=V_t+\\sqrt{\\frac{2I_{D1}}{k_{n1}}}\n\\]\n\nSaturation of that point needs \\(V_X\\ge V_{out}-V_t\\) (\\(M_2\\)) and \\(V_{out}\\ge V_X-V_t\\) (\\(M_1\\)). This is the only DC solution, since \\(I_{in}\\) must flow through \\(M_2\\).\n\n## That equilibrium is unstable\n\nSmall-signal conductance matrix for \\((v_X, v_{out})\\), with \\(R_L=R_{D1}\\parallel r_{o1}\\):\n\n\\[\n\\begin{bmatrix} i_{in}\\\\ i_{out}\\end{bmatrix}\n=\n\\begin{bmatrix} 1/r_{o2} & g_{m2}\\\\ g_{m1} & 1/R_L \\end{bmatrix}\n\\begin{bmatrix} v_X\\\\ v_{out}\\end{bmatrix}\n\\]\n\n\\[\n\\det G=\\frac{1}{r_{o2}R_L}-g_{m1}g_{m2}=\\frac{1-A_1A_2}{r_{o2}R_L}\n\\]\n\nwhere \\(A_1=g_{m1}R_L\\) and \\(A_2=g_{m2}r_{o2}\\) are the two stage gains. Since \\(A_1A_2\\gg1\\), \\(\\det G<0\\): the eigenvalues have opposite signs, so one is negative.\n\nWith capacitances \\(C_X\\) at \\(X\\) and \\(C_o\\) at the output, the source-free characteristic equation is \\(\\det(G+sC)=0\\), i.e.\n\n\\[\ns^2C_XC_o+s\\!\\left(\\frac{C_X}{R_L}+\\frac{C_o}{r_{o2}}\\right)+\\det G=0.\n\\]\n\nThe constant term is negative, so the product of the roots is negative: one root is in the right half-plane. The bias point is unstable for any realistic sizing (it stays unstable even as \\(r_{o2}\\to\\infty\\)).\n\nEquivalently, both ports show negative resistance. With the output open,\n\n\\[\nr_{in}=\\frac{v_X}{i_{in}}\\approx-\\frac{1}{g_{m1}g_{m2}(R_{D1}\\parallel r_{o1})}<0,\n\\qquad\nR_{out}\\approx-\\frac{1}{g_{m1}g_{m2}r_{o2}}<0.\n\\]\n\n## Conclusion\n\nIt is a negative-resistance/regenerative cell. The closed-form bias above is a valid DC solution but a repelling one: the circuit will not amplify linearly about it. A positive disturbance at \\(X\\) turns \\(M_1\\) on harder, drops \\(V_{out}\\), which starves \\(M_2\\), which lets \\(I_{in}\\) charge \\(X\\) still higher — runaway. It regenerates until the devices leave saturation and the current source's compliance limits it (\\(V_X\\) driven high, \\(V_{out}\\) driven low), i.e. latch/Schmitt behavior rather than linear transimpedance gain.",
        "format": "markdown",
        "sha256": "5f5446ae077d353d652413c82364d7aeccc1053c1ec0417d49fe9536dbea3cc7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2’s gate is tied to Vout, forming positive feedback through M1 and M2, and gives correct consequences: negative resistance, instability, and latching rather than stable linear amplification. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2944,
        "input_tokens": 2992,
        "output_tokens": 31302,
        "total_tokens": 34294,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2944,
        "input_tokens": 2992,
        "output_tokens": 31302,
        "total_tokens": 34294,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a shunt–shunt feedback transimpedance amplifier (TIA): it converts the input current \\(I_\\text{in}\\) into the output voltage \\(V_\\text{out}\\).\n\n## Topology\n\n- **Input device \\(M_1\\)** is an NMOS common-gate stage. Its gate is held at the fixed bias \\(V_b\\), the signal current is applied at the source, and \\(R_{D1}\\) is the drain load. Node \\(X\\) is therefore a low-impedance current-sensing node followed by voltage gain.\n- **\\(M_2\\)** is an NMOS common-source stage with drain load \\(R_{D2}\\). It supplies the additional voltage gain and the signal inversion needed for negative feedback.\n- **\\(R_F\\)** closes the loop from \\(V_\\text{out}\\) back to the source of \\(M_1\\). The current through it is the labeled feedback current \\(i_{RF}\\).\n\nBoth transistors are diode-connected to neither supply; \\(M_2\\)’s source is grounded and \\(M_1\\)’s source sits at the input node, so both are enhancement NMOS devices in the usual stacked bias arrangement.\n\n## Bias and signal polarity\n\n\\(V_b\\) sets \\(V_{GS1}\\) and hence the quiescent current of \\(M_1\\). That current, dropped across \\(R_{D1}\\), sets \\(V_X\\) and therefore the gate bias of \\(M_2\\). \\(R_{D2}\\) then sets the quiescent \\(V_\\text{out}\\). \\(R_F\\) carries only a small DC current if the input node and \\(V_\\text{out}\\) are at similar DC levels; its main role is AC feedback.\n\nSmall-signal polarity, with the \\(I_\\text{in}\\) arrow injecting current into the source of \\(M_1\\):\n\n1. Larger \\(I_\\text{in}\\) raises the source of \\(M_1\\), reducing \\(V_{GS1}\\) and the current in \\(R_{D1}\\).\n2. Node \\(X\\) rises, so \\(M_2\\) conducts more.\n3. \\(V_\\text{out}\\) falls.\n\nThe loop is therefore inverting. A falling \\(V_\\text{out}\\) pulls current out of the input node through \\(R_F\\), opposing the original increase in \\(I_\\text{in}\\) — negative feedback.\n\n## Closed-loop behavior\n\nWith large loop gain the input node is a virtual ground relative to the feedback, and almost all of \\(I_\\text{in}\\) is absorbed by \\(R_F\\):\n\n\\[\n\\frac{V_\\text{out}}{I_\\text{in}} \\approx -R_F\n\\]\n\nMore precisely, if \\(A\\) is the open-loop gain from the input-node voltage to \\(V_\\text{out}\\) and \\(R_\\text{in,ol}\\) is the open-loop resistance at the source of \\(M_1\\),\n\n\\[\nZ_T = \\frac{V_\\text{out}}{I_\\text{in}} = -\\frac{A}{1+A}\\left(R_F \\parallel \\text{terms in }R_\\text{in,ol}\\right)\n\\]\n\nwhich approaches \\(-R_F\\) as the loop gain \\(A R_\\text{in,ol}/(R_F+R_\\text{in,ol})\\) becomes large. The common-gate stage is what makes \\(R_\\text{in,ol}\\) small (\\(\\approx 1/g_{m1}\\)), so the loop gain can be large without an enormous \\(R_F\\).\n\n## Impedances and why this arrangement is used\n\n- **Input resistance** is lowered by the shunt feedback from the already-small common-gate value \\(1/g_{m1}\\) to roughly \\((1/g_{m1})/(1+A_\\text{loop})\\). That is the point of the topology: a low input impedance so a current source (photodiode, mixer, etc.) delivers its current into the amplifier rather than into its own capacitance.\n- **Output resistance** is \\(R_{D2}\\) reduced by the loop gain, since the feedback samples the output voltage.\n- **Bandwidth** is set mainly by the input pole. Feedback multiplies the frequency of that pole by the loop gain (resistive broadbanding), which is why this CG + CS + \\(R_F\\) cascade is a standard optical-receiver front end. The price is a noise contribution from \\(R_F\\), \\(R_{D1}\\), and both devices, and a stability constraint: the two gain stages plus the input capacitance can make the loop ring if \\(R_F\\) or the second-stage gain is too large.\n\nSo the circuit is a negative-feedback current-to-voltage converter whose ideal midband gain is \\(-R_F\\), with \\(M_1\\) providing a low open-loop input impedance and \\(M_2\\) providing the inverting voltage gain that closes the shunt–shunt loop.",
        "format": "markdown",
        "sha256": "a1d46cb549e009db731d6bd7ac83bd255d92433ffa1f26afbe05a4d55ad51e3b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node. It also correctly describes the negative-feedback polarity and TIA behavior.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3176,
        "output_tokens": 3002,
        "total_tokens": 6178,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3176,
        "output_tokens": 3002,
        "total_tokens": 6178,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a shunt-feedback transimpedance amplifier (TIA): a common-gate stage \\(M_1\\) followed by a common-source stage \\(M_2\\), with resistive feedback \\(R_F\\). It converts the input current \\(I_{in}\\) into the voltage \\(V_{out}\\).\n\n## Topology\n\n- \\(M_1\\) is common-gate. Its gate is AC-grounded by the bias \\(V_b\\), its source is the input node, and \\(R_{D1}\\) is its drain load. Looking into the source gives a low impedance (\\(\\approx 1/g_{m1}\\)), so most of \\(I_{in}\\) is absorbed by \\(M_1\\).\n- Node \\(X\\) drives \\(M_2\\), a common-source stage with load \\(R_{D2}\\). This stage supplies the voltage gain.\n- \\(R_F\\) closes a shunt–shunt loop from \\(V_{out}\\) back to the input node: it samples the output voltage and returns a current to the input.\n\nPolarity of the core amplifier: the common-gate stage is non-inverting (\\(v_X/v_{in}=+g_{m1}R_{D1}\\)) and the common-source stage is inverting, so the cascade is inverting,\n\n\\[\nA_{ol}=\\frac{v_{out}}{v_{in}}\\bigg|_{R_F\\text{ open}}=-g_{m1}g_{m2}R_{D1}R_{D2}.\n\\]\n\nFeeding an inverting output back to the input through \\(R_F\\) is negative feedback, so the loop is stable.\n\n## Closed-loop transimpedance\n\nWith channel-length modulation and body effect neglected, KCL at the input, at \\(X\\), and at the output gives the midband gain. In the high loop-gain limit (\\(g_{m1}g_{m2}R_{D1}R_{D2}\\gg R_F\\) and \\(g_{m1}R_F\\gg 1\\)) it collapses to the usual result\n\n\\[\nZ_T=\\frac{V_{out}}{I_{in}}\\approx -R_F.\n\\]\n\nSo \\(R_F\\) sets the gain and the signal is inverted. A compact finite-gain form (same assumptions) is\n\n\\[\nZ_T=\\frac{-R_{D2}\\,(g_{m1}g_{m2}R_{D1}R_F-1)}{g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}+1},\n\\]\n\nwhich approaches \\(-R_F\\) as the \\(g_{m1}g_{m2}R_{D1}R_{D2}\\) term dominates.\n\nBecause the input sits at a virtual ground, \\(R_F\\) carries essentially all of \\(I_{in}\\) from the input node to the output node, and \\(M_2\\) sinks that current. The labeled \\(i_{RF}\\) is just the reference direction; its value is \\(\\approx -I_{in}\\).\n\n## Input impedance\n\nShunt feedback divides the already-low common-gate input impedance by the loop gain, so\n\n\\[\nZ_{in}=\\frac{v_{in}}{i_{in}}\\approx 0\n\\]\n\nin the ideal limit (exactly, \\(Z_{in}=(1+Z_T/R_F)/(g_{m1}+1/R_F)\\), and the numerator vanishes as \\(Z_T\\to -R_F\\)). The low \\(Z_{in}\\) is the point of the common-gate front end: it keeps the pole set by the source capacitance (e.g. a photodiode) at high frequency, which is why this CG–CS feedback arrangement is used as a wideband optical-receiver front end.\n\n## Bias and design roles\n\n- \\(V_b\\) sets \\(V_{GS1}\\) and hence the bias current of \\(M_1\\); the DC drop across \\(R_{D1}\\) then biases the gate of \\(M_2\\).\n- \\(R_{D1}\\) sets the first-stage gain and the DC level at \\(X\\); \\(R_{D2}\\) sets the second-stage gain. Their product \\(g_{m1}g_{m2}R_{D1}R_{D2}\\) is the loop-gain magnitude that makes \\(Z_T\\) approach \\(-R_F\\) and \\(Z_{in}\\) approach zero.\n- \\(R_F\\) simultaneously sets the transimpedance, closes the bias/feedback path, and trades gain against bandwidth: larger \\(R_F\\) gives more gain and better noise but a lower feedback pole.\n\nMidband only: capacitances, \\(r_o\\), and body effect (relevant for \\(M_1\\), whose source is not at the bulk) are omitted above; they set the bandwidth and the exact gain but not the \\(-R_F\\) limit.",
        "format": "markdown",
        "sha256": "5412770a8b8c92cc023a69223220af22d123cab7dd4dcb1351c74a031a021e1b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input, forming a transimpedance amplifier; this meets the full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3176,
        "output_tokens": 12629,
        "total_tokens": 15805,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3176,
        "output_tokens": 12629,
        "total_tokens": 15805,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11553,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a shunt–shunt feedback transimpedance amplifier (TIA): a common-gate input device \\(M_1\\), a common-source gain stage \\(M_2\\), and resistive feedback \\(R_F\\).\n\n## Topology and function\n\n- \\(I_\\mathrm{in}\\) is the signal (a current source, e.g. a photodiode or sensor).\n- \\(M_1\\) is common-gate (gate at fixed bias \\(V_b\\)). It presents a low resistance at the input and steers the input current into \\(R_{D1}\\).\n- Node \\(X\\) drives \\(M_2\\), a common-source stage with load \\(R_{D2}\\). This provides the voltage gain.\n- \\(R_F\\) samples \\(V_\\mathrm{out}\\) and returns a current to the input node (shunt mixing, shunt sampling).\n\nBoth transistors are NMOS. \\(V_{DD}\\) is an AC ground. The feedback polarity is negative: an increase in \\(I_\\mathrm{in}\\) raises the source of \\(M_1\\), raises \\(X\\), and pulls \\(V_\\mathrm{out}\\) down; the drop in \\(V_\\mathrm{out}\\) draws current back through \\(R_F\\), opposing \\(I_\\mathrm{in}\\).\n\nAt DC the same loop sets the bias (with \\(I_\\mathrm{in}\\) having no DC component, the source current of \\(M_1\\) flows through \\(R_F\\)). \\(V_b\\) and \\(R_{D1}\\) set \\(I_{D1}\\) and the gate bias of \\(M_2\\).\n\n## Small-signal midband gain\n\nAssumptions: saturation, no body effect, \\(r_o\\to\\infty\\), no capacitances (midband).\n\nLet \\(v_s\\) be the source voltage of \\(M_1\\) and \\(G=g_{m1}g_{m2}R_{D1}\\). Nodal analysis gives\n\n\\[\nv_X=g_{m1}R_{D1}v_s,\n\\]\n\n\\[\n\\frac{V_\\mathrm{out}}{I_\\mathrm{in}}\n=-\\frac{R_{D2}(G R_F-1)}{G R_{D2}+g_{m1}(R_F+R_{D2})+1}.\n\\]\n\nEquivalently,\n\n\\[\n\\frac{V_\\mathrm{out}}{I_\\mathrm{in}}\n=-\\frac{(g_{m1}g_{m2}R_{D1}R_F-1)R_{D2}}{g_{m1}g_{m2}R_{D1}R_{D2}+g_{m1}(R_F+R_{D2})+1}.\n\\]\n\nIf the loop gain is large (\\(g_{m1}g_{m2}R_{D1}R_F\\gg 1\\) and \\(g_{m1}g_{m2}R_{D1}R_{D2}\\gg g_{m1}(R_F+R_{D2})\\)), the input node is a virtual ground and\n\n\\[\n\\frac{V_\\mathrm{out}}{I_\\mathrm{in}}\\approx -R_F.\n\\]\n\nThat is the design equation for the TIA: the closed-loop transimpedance is set by the feedback resistor, not by the transistor parameters.\n\nChecks on the exact result:\n- \\(g_{m2}\\to\\infty\\) forces \\(v_s\\to 0\\), so \\(V_\\mathrm{out}=-I_\\mathrm{in}R_F\\).\n- \\(R_F\\to\\infty\\) (feedback removed) leaves the open-loop transimpedance \\(-g_{m2}R_{D1}R_{D2}\\). The \\(g_{m1}\\) cancels: \\(M_1\\) converts \\(I_\\mathrm{in}\\) into \\(v_X=I_\\mathrm{in}R_{D1}\\), and \\(M_2\\) amplifies that voltage by \\(-g_{m2}R_{D2}\\).\n\nThe \\(-1\\) in the numerator is the direct feedthrough through \\(R_F\\) and is negligible when the amplifier gain is high.\n\n## Impedances\n\nInput impedance:\n\n\\[\nZ_\\mathrm{in}=\\frac{v_s}{I_\\mathrm{in}}\n=\\frac{R_F+R_{D2}}{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}.\n\\]\n\n- With feedback removed, \\(Z_\\mathrm{in}\\to 1/g_{m1}\\) (ordinary common-gate input resistance).\n- With high loop gain,\n\n\\[\nZ_\\mathrm{in}\\approx\\frac{R_F+R_{D2}}{g_{m1}g_{m2}R_{D1}R_{D2}},\n\\]\n\nmuch smaller than \\(1/g_{m1}\\). Shunt feedback at the input is what produces this reduction.\n\nVoltage sampling at the output likewise lowers \\(Z_\\mathrm{out}\\) below the open-loop value \\(\\approx R_{D2}\\), so the stage can drive a resistive load without the gain collapsing to the ideal \\(-R_F\\).\n\n## Role of each device\n\n| Element | Role |\n|---|---|\n| \\(M_1\\) (CG) | Current buffer; sets a moderately low \\(Z_\\mathrm{in}\\) even before feedback; \\(R_{D1}\\) converts its current to the voltage at \\(X\\) |\n| \\(M_2\\) (CS) | Inverting voltage gain that makes the loop gain large and sets the sign of the feedback |\n| \\(R_F\\) | Sets \\(V_\\mathrm{out}/I_\\mathrm{in}\\approx -R_F\\); also closes the DC bias loop |\n| \\(R_{D1}, R_{D2}\\) | Loads; their product with the transconductances sets loop gain (and therefore how closely the gain approaches \\(-R_F\\) and how low \\(Z_\\mathrm{in}\\) becomes) |\n| \\(V_b\\) | Bias for \\(M_1\\); together with \\(R_{D1}\\) it places \\(M_2\\) in saturation |\n\n## Practical notes\n\n- Loop gain must stay large over the intended signal range, otherwise the gain falls below \\(R_F\\) and becomes sensitive to \\(g_m\\) and the drain resistors (see the exact expression).\n- If the bulk of \\(M_1\\) is grounded rather than tied to its source, body effect replaces \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\) in the input branch and lowers \\(Z_\\mathrm{in}\\) further. \\(M_2\\) has no body effect if its source and bulk are both at ground.\n- With a capacitive source (photodiode capacitance), the low closed-loop \\(Z_\\mathrm{in}\\) pushes the input pole out. Bandwidth is then set by the loop gain and the poles at \\(X\\) and \\(V_\\mathrm{out}\\), not by \\(R_F C_\\mathrm{in}\\) alone. No capacitors are shown, so that is outside the midband model above.\n- Noise of \\(R_F\\) appears directly at the output as a current noise \\(4kT/R_F\\) referred to the input; raising \\(R_F\\) improves both gain and noise but costs loop gain and bandwidth.\n\n**Bottom line:** it is a CG–CS shunt-feedback TIA whose midband transimpedance is \\(-R_F\\) when the loop gain is high, with a feedback-suppressed input impedance well below \\(1/g_{m1}\\).",
        "format": "markdown",
        "sha256": "7ebd8ec60e63e782a5d5f2177b3a4ae3031a07a3600717fc3dc9b1871601ea2c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input, forming a transimpedance amplifier. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3072,
        "input_tokens": 3176,
        "output_tokens": 13827,
        "total_tokens": 17003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3072,
        "input_tokens": 3176,
        "output_tokens": 13827,
        "total_tokens": 17003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a shunt–shunt feedback transimpedance stage. \\(I_{in}\\) is the input, \\(V_{out}\\) is the output, and the \\(M_1\\)–\\(M_2\\) loop is negative feedback that makes the input node a low-impedance current-summing node.\n\n## Topology\n\n- \\(M_1\\) (NMOS): gate at the fixed bias \\(V_b\\), drain at \\(V_{out}\\), source at the input node (call it \\(Y\\)). With its gate AC-grounded it is the forward common-gate device.\n- \\(M_2\\) (PMOS): source at \\(V_{DD}\\), gate at \\(V_{out}\\), drain at node \\(Y\\). It senses the output voltage and returns a current to the input node, so it is the feedback device.\n- \\(I_1\\): bias current into the \\(V_{out}\\) node; it sets \\(M_1\\)'s current.\n- The unlabeled source from node \\(Y\\) to ground is a DC bias sink. \\(I_{in}\\) (arrow into node \\(Y\\)) is the signal current.\n\nThe feedback is shunt-derived and shunt-applied: \\(M_2\\) samples \\(V_{out}\\) and feeds back a current \\(g_{m2}V_{out}\\) that is compared with \\(I_{in}\\) at node \\(Y\\). That is the right feedback type for a current-to-voltage converter.\n\n## Bias\n\nAt the output node the gate of \\(M_2\\) draws no current, so\n\\[\nI_{D1}=I_1.\n\\]\nAt node \\(Y\\), with \\(I_B\\) the downward bias sink,\n\\[\nI_B=I_1+I_{D2}+I_{in,\\text{DC}}.\n\\]\n\\(V_{out}\\) settles where \\(M_2\\), sized and biased as above, carries whatever \\(I_{D2}\\) this balance requires. Both devices must stay in saturation:\n- \\(M_1\\): \\(V_{out}\\ge V_b-V_{tn}\\)\n- \\(M_2\\): \\(V_Y\\le V_{out}+|V_{tp}|\\), and \\(V_{DD}-V_{out}>|V_{tp}|\\) so it is on.\n\n## Why the loop is negative\n\nIf node \\(Y\\) rises, \\(V_{GS1}\\) falls, so \\(M_1\\) sinks less of \\(I_1\\) and \\(V_{out}\\) rises. The higher gate voltage reduces \\(|V_{GS2}|\\), so \\(M_2\\) pushes less current into node \\(Y\\), opposing the original rise. The feedback is degenerative.\n\n## Small-signal results\n\nTaking \\(G_{m1}=g_{m1}+g_{mb1}\\) (body of \\(M_1\\) at ground; drop \\(g_{mb1}\\) if the body is tied to the source), \\(M_2\\) with no body effect, and an unloaded output:\n\n\\[\n\\frac{V_{out}}{I_{in}}=\\frac{(1+G_{m1}r_{o1})\\,r_{o2}}{1+g_{m2}r_{o2}(1+G_{m1}r_{o1})}\\approx\\frac{1}{g_{m2}}\n\\]\n\n\\[\nZ_{in}=\\frac{V_Y}{I_{in}}\\approx\\frac{1}{g_{m2}\\,G_{m1}\\,r_{o1}}\n\\]\n\n\\[\nZ_{out}\\approx\\frac{1}{g_{m2}}\n\\]\n\nThe approximations hold for \\(g_mr_o\\gg1\\). They also follow directly from feedback theory: the feedback factor is \\(\\beta=g_{m2}\\), so the closed-loop transimpedance is \\(1/\\beta=1/g_{m2}\\), and both port impedances are reduced by the loop gain \\(G_{m1}r_{o1}\\).\n\n## Behavior\n\n- Node \\(Y\\) is a virtual ground for current: its impedance is roughly \\(g_{m1}r_{o1}\\) times smaller than the transimpedance, so \\(I_{in}\\) produces very little voltage there.\n- That current is converted to \\(V_{out}\\approx I_{in}/g_{m2}\\), positive sense (current pushed into node \\(Y\\) raises \\(V_{out}\\)).\n- The same loop cuts the output impedance from the high drain-node value down to about \\(1/g_{m2}\\), so a load much larger than \\(1/g_{m2}\\) is needed to realize the full transimpedance.\n- Net power gain is about \\(g_{m1}r_{o1}\\): the input power is absorbed in the very small \\(Z_{in}\\), while the output is delivered at \\(1/g_{m2}\\).",
        "format": "markdown",
        "sha256": "257bc6bb56c4158f88c33aef7c8fb40b2e5d94f55f3e9a4db7c67350fb974db6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS, M2 as the PMOS feedback device, and the feedback path to the input node. It gives the required low input resistance and the transimpedance/output resistance of approximately 1/gm2.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3084,
        "output_tokens": 18357,
        "total_tokens": 21441,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17318,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3084,
        "output_tokens": 18357,
        "total_tokens": 21441,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17318,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a shunt-feedback transimpedance stage (a unity current buffer). Reading the devices by their source arrows and supply connections: \\(M_1\\) is an NMOS (source at the bottom node, gate at the fixed bias \\(V_b\\), drain at the output), and \\(M_2\\) is a PMOS (source at \\(V_{DD}\\), gate at the output node, drain at the bottom node). \\(M_2\\) must be the PMOS — with its source at \\(V_{DD}\\) only a PMOS can be turned on.\n\nLabel the output node \\(Y\\) (\\(V_{out}\\)) and the bottom node \\(X\\) (where \\(I_{in}\\) enters). The downward source at node \\(X\\) is an unlabeled DC sink; call it \\(I_B\\).\n\n## How it works\n\n\\(M_2\\) closes a negative-feedback loop around \\(M_1\\): \\(V_{out}\\) drives \\(M_2\\)'s gate, \\(M_2\\)'s drain drives node \\(X\\), and node \\(X\\) is the source of \\(M_1\\), whose drain returns to \\(V_{out}\\). The loop holds node \\(X\\) at a fixed voltage set only by \\(V_b\\) and \\(I_1\\), i.e. node \\(X\\) is a virtual ground for the signal current, and it steers whatever current is injected there into \\(M_2\\).\n\n## DC operating point (saturation, no external load)\n\nKCL at node \\(Y\\): the source \\(I_1\\) feeds \\(M_1\\)'s drain, so\n\\[\nI_{D1}=I_1.\n\\]\nWith \\(M_1\\)'s gate fixed, this pins node \\(X\\):\n\\[\nV_X=V_b-V_{tn}-\\sqrt{\\frac{2I_1}{k_n}},\\qquad k_n=\\mu_nC_{ox}\\!\\left(\\tfrac{W}{L}\\right)_1,\n\\]\nindependent of \\(I_{in}\\) — the low-impedance behavior of the input node.\n\nKCL at node \\(X\\) (both drain/source currents enter \\(X\\), \\(I_{in}\\) enters, \\(I_B\\) leaves):\n\\[\nI_{D2}=I_B-I_1-I_{in}.\n\\]\n\\(M_2\\) converts that current into voltage (\\(k_p=\\mu_pC_{ox}(W/L)_2\\)):\n\\[\nV_{out}=V_{DD}-|V_{tp}|-\\sqrt{\\frac{2(I_B-I_1-I_{in})}{k_p}}.\n\\]\nSo \\(V_{out}\\) rises as \\(I_{in}\\) rises. This needs \\(I_B>I_1+I_{in}\\) (so \\(I_{D2}>0\\)) and both devices in saturation.\n\n## Small-signal behavior\n\nDifferentiating the DC result, with \\(g_{m2}=\\partial I_{D2}/\\partial V_{SG2}\\):\n\\[\n\\frac{v_{out}}{i_{in}}=\\frac{1}{g_{m2}}.\n\\]\nThe same result comes from the small-signal model: the loop forces \\(M_1\\)'s signal current to zero, so \\(i_{in}\\) is absorbed entirely by \\(M_2\\), and \\(M_2\\) needs \\(\\Delta V_{SG}=-i_{in}/g_{m2}\\) to do it, i.e. \\(\\Delta V_{out}=+i_{in}/g_{m2}\\).\n\nIncluding finite output resistance (\\(G_{m1}=g_{m1}+g_{mb1}\\), with \\(M_1\\)'s body effect counted since its source sits above the substrate):\n\n- Transimpedance:\n\\[\nZ_t=\\frac{v_{out}}{i_{in}}=\\left[g_{m2}+\\frac{1}{r_{o2}\\,[1+G_{m1}r_{o1}]}\\right]^{-1}\\approx\\frac{1}{g_{m2}}.\n\\]\n- Input resistance at node \\(X\\):\n\\[\nR_{in}=\\frac{1}{g_{m2}\\,[1+G_{m1}r_{o1}]+1/r_{o2}}\\approx\\frac{1}{g_{m2}G_{m1}r_{o1}},\n\\]\nvery small (a virtual ground); the body effect and the loop gain both push it down.\n- Output resistance at \\(V_{out}\\): \\(R_{out}=1/g_{m2}\\) (ideally). The shunt feedback cuts the otherwise high drain impedance down by the loop gain.\n\nEquivalently, the output Norton form is a current \\(i_{in}\\) in parallel with \\(1/g_{m2}\\): the short-circuit output current equals \\(i_{in}\\) (unity, non-inverting current transfer), and with a load \\(R_L\\),\n\\[\nv_{out}=i_{in}\\left(\\frac{1}{g_{m2}}\\parallel R_L\\right).\n\\]",
        "format": "markdown",
        "sha256": "6761e4bab8ae5eb79a95d71b8b9b0af63d7c8d1b1da7153bfe7ad1d50939f79c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS common-gate input device and PMOS feedback device, traces the feedback path to the input node, and gives the low input resistance and approximately 1/gm2 transimpedance/output resistance.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3084,
        "output_tokens": 22347,
        "total_tokens": 25431,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21235,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3084,
        "output_tokens": 22347,
        "total_tokens": 25431,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21235,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a shunt-feedback transimpedance stage. \\(M_1\\) is an NMOS with a fixed gate bias \\(V_b\\), and \\(M_2\\) is a PMOS whose gate is tied to the output, closing a feedback loop around the input node.\n\n## Device roles\n\n- \\(M_2\\) (PMOS): source at \\(V_{DD}\\), gate at \\(V_{out}\\), drain at the input node \\(X\\).\n- \\(M_1\\) (NMOS): drain at \\(V_{out}\\), gate at the constant bias \\(V_b\\), source at node \\(X\\).\n- \\(I_1\\): DC current into the \\(V_{out}\\) node; it alone sets \\(M_1\\)'s current.\n- \\(I_{in}\\): signal current injected into node \\(X\\).\n- The unlabeled source sinking current from node \\(X\\) to ground is a DC bias, denoted \\(I_B\\) below.\n\n## DC operating point\n\nNo gate current flows, so KCL at the two nodes gives\n\n\\[\nI_{D1}=I_1, \\qquad I_{D2}=I_1+I_B-I_{in}.\n\\]\n\nBecause \\(I_{D1}\\) is fixed by \\(I_1\\) and \\(M_1\\)'s gate is held at \\(V_b\\), its gate-source voltage is fixed and node \\(X\\) sits at a constant voltage\n\n\\[\nV_X=V_b-V_{GS1}(I_1).\n\\]\n\n\\(M_2\\) then sets the output from its own current:\n\n\\[\nV_{out}=V_{DD}-V_{SG2}(I_{D2})=V_{DD}-|V_{tp}|-\\sqrt{\\frac{2(I_1+I_B-I_{in})}{\\mu_p C_{ox}(W/L)_2}}.\n\\]\n\nSo \\(V_{out}\\) rises as \\(I_{in}\\) rises, and the allowable input range is \\(I_{in}\\le I_1+I_B\\) (keeping \\(I_{D2}\\ge 0\\)). Both devices stay in saturation provided \\(V_{out}\\ge V_b-V_{tn}\\) and \\(V_X\\le V_{out}+|V_{tp}|\\).\n\n## Small-signal behavior\n\nLinearizing \\(V_{SG2}(I_{D2})\\) about the bias point, with \\(g_{m2}=\\partial I_{D2}/\\partial V_{SG2}\\),\n\n\\[\n\\frac{v_{out}}{i_{in}}=\\frac{1}{g_{m2}}.\n\\]\n\nThe sign is positive: extra current into node \\(X\\) cannot flow in \\(M_1\\) (its current is pinned by \\(I_1\\)) or in \\(I_B\\), so it subtracts from \\(I_{D2}\\); the smaller \\(V_{SG2}\\) moves the gate, \\(V_{out}\\), upward.\n\nIncluding finite output resistance does not change this result to first order. Nodal analysis gives\n\n\\[\n\\frac{v_{out}}{i_{in}}=\\frac{1+g_{m1}r_{o1}}{g_{m2}(1+g_{m1}r_{o1})+1/r_{o2}}\\approx\\frac{1}{g_{m2}},\n\\]\n\nthe correction being of order \\(1/(g_m r_o)^2\\).\n\n## Port impedances\n\n- Input impedance at node \\(X\\): the loop clamps \\(X\\), giving \\(Z_{in}\\approx 1/(g_{m1}g_{m2}r_{o1})\\), i.e. a virtual ground. \\(M_1\\) supplies the clamping; \\(M_2\\) supplies the feedback.\n- Output impedance at \\(V_{out}\\): \\(R_{out}\\approx 1/g_{m2}\\).\n\nA consistency check: with \\(V_{out}\\) shorted, the short-circuit output current equals \\(i_{in}\\), and \\(R_m/R_{out}=(1/g_{m2})/R_{out}=1\\) reproduces that, confirming \\(R_{out}\\approx 1/g_{m2}\\).\n\n## Summary\n\n\\(I_{in}\\) is applied to a virtual ground and converted to a voltage with transimpedance \\(1/g_{m2}\\) and low output impedance \\(1/g_{m2}\\). The bias current \\(I_1\\) fixes \\(M_1\\)'s current and hence the voltage at the input node, while \\(M_2\\) both absorbs the signal current and sets the gain.",
        "format": "markdown",
        "sha256": "9f8282df57723a04d6ce65e02fcb200b5860d3efc8c428ebb6eb4ee24e5aa89b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device and PMOS feedback path, and gives the low input resistance and approximately 1/gm2 transimpedance and output resistance required for full credit.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3072,
        "input_tokens": 3084,
        "output_tokens": 14291,
        "total_tokens": 17375,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3072,
        "input_tokens": 3084,
        "output_tokens": 14291,
        "total_tokens": 17375,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator. Each stage contributes a DC inversion, and the three load poles contribute additional phase lag. The phase condition for oscillation is therefore satisfied at a nonzero frequency \\(\\omega=\\sqrt{3}\\,\\omega_p\\) (where \\(\\omega_p\\propto 1/C_L\\)) provided only that the DC gain of each inverter exceeds 2. Because this gain requirement is independent of \\(C_L\\), a finite oscillation frequency continues to exist for every finite capacitance. Making the capacitors arbitrarily large simply scales that frequency toward zero; it does not extinguish the oscillation.\n\nFinal answer: no",
        "format": "markdown",
        "sha256": "82550a64ef6660029454e34f9ff1b4f786271685051d02ad5fd213688eadcaf5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency and supports this with the small-signal phase and gain conditions; the frequency tends toward zero as capacitance grows.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3109,
        "output_tokens": 3319,
        "total_tokens": 6428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3189,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3109,
        "output_tokens": 3319,
        "total_tokens": 6428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3189,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator. Each inverter has a DC gain \\(A_0\\) fixed by its own transconductance and output resistance (the capacitors are open circuits at DC and therefore do not affect \\(A_0\\)).\n\nSmall-signal analysis of the loop yields the characteristic equation \\(H(s)^3=1\\). The only frequency at which the phase condition can be satisfied produces the oscillation criterion \\(A_0>2\\). Because a logic inverter easily meets this gain requirement, a complex-conjugate pair of poles lies in the right half-plane for any finite load capacitance. Consequently the equilibrium is unstable and a growing sinusoid appears; large-signal clipping then produces a stable periodic waveform whose period simply scales linearly with \\(C_L\\).\n\nThus the circuit continues to oscillate for arbitrarily large (but finite) capacitors; only the frequency tends to zero.\n\nFinal answer: No",
        "format": "markdown",
        "sha256": "f0194f0cdd97c18614c16f028d8660544f204b7951667a2920a25a4b4fa7e8d9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency. Its small-signal argument correctly keeps the gain criterion independent of load capacitance and explains that increasing capacitance lowers the oscillation frequency.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3109,
        "output_tokens": 4622,
        "total_tokens": 7731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4434,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3109,
        "output_tokens": 4622,
        "total_tokens": 7731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4434,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator. Each stage may be modeled with DC gain \\(-A_0\\) (\\(A_0>2\\)) and a single pole whose frequency \\(\\omega_p\\) is inversely proportional to \\(C_L\\).\n\nThe Barkhausen criterion is satisfied at \\(\\omega=\\omega_p\\sqrt{3}\\) provided \\(A_0>2\\). Because this gain condition is independent of \\(C_L\\), the circuit continues to oscillate for every finite value of the capacitors; only the oscillation frequency tends to zero as the capacitors become arbitrarily large.\n\nFinal answer: no",
        "format": "markdown",
        "sha256": "532197d8d6797c79ddc773cbfdc2eab935cbab9359d46a3f90d6cd6926a907ee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors slow the ring and lower its oscillation frequency without changing the Barkhausen gain condition; the small-signal argument is sound.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3109,
        "output_tokens": 1959,
        "total_tokens": 5068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1833,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3109,
        "output_tokens": 1959,
        "total_tokens": 5068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1833,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage CMOS ring oscillator. Doubling every load capacitance halves the oscillation frequency while leaving the power dissipation unchanged (dynamic energy per cycle scales directly with \\(C_L\\), but the number of cycles per second scales inversely with \\(C_L\\)).\n\nBoth the Hajimiri impulse-sensitivity-function analysis and the ring-oscillator form of Leeson’s formula then show that the \\(1/f^2\\) phase-noise density must improve by exactly 6 dB at any fixed offset frequency:\n- \\(q_{\\max}\\propto C_L\\) doubles, so the \\(1/q_{\\max}^2\\) factor supplies \\(-6\\) dB;\n- equivalently, \\(\\mathcal{L}(\\Delta\\omega)\\propto f_0^2/P\\) and \\(P\\) is constant, again supplying \\(-6\\) dB.\n\n(The same scaling leaves the figure of merit unchanged, as expected.)\n\nFinal answer: decreases by 6 dB",
        "format": "markdown",
        "sha256": "b7bde0ac15598fe42bdad0d25c2c889e81e55a88dbd5f861f4bb6a64689830f5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts a 6 dB phase-noise decrease at fixed offset, supported by the halved oscillation frequency and an equivalent charge-based scaling argument.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3107,
        "output_tokens": 5982,
        "total_tokens": 9089,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5778,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3107,
        "output_tokens": 5982,
        "total_tokens": 9089,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5778,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator. Doubling each load capacitance doubles the maximum charge swing \\(q_{\\max}\\) at every node while leaving the normalized waveform (and therefore the ISF) unchanged and leaving the device noise current spectral densities unchanged. Hajimiri’s expression for phase noise therefore falls by exactly \\(q_{\\max}^{2}=6\\,\\mathrm{dB}\\) at any fixed offset frequency. (The same factor is obtained from a first-principles jitter calculation: period jitter variance scales as \\(C_{L}\\) while \\(f_{0}^{3}\\) scales as \\(1/C_{L}^{3}\\), again yielding a net \\(1/C_{L}^{2}\\) improvement.)\n\nFinal answer: decreases by 6 dB",
        "format": "markdown",
        "sha256": "d77f1e0d7bf3b50099038d9b19e2672b161f26a4d613a75877a966c8a6e9503b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 6 dB (factor-of-four) reduction at fixed offset and supports it with a charge-swing/jitter argument consistent with the expected scaling.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3072,
        "input_tokens": 3107,
        "output_tokens": 13119,
        "total_tokens": 16226,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12965,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3072,
        "input_tokens": 3107,
        "output_tokens": 13119,
        "total_tokens": 16226,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12965,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage CMOS ring oscillator. Doubling each load capacitance (with device sizes held fixed) leaves the voltage waveform unchanged when plotted against phase, but stretches all time constants by \\(2\\times\\). Consequently the oscillation frequency is halved while the power dissipation remains essentially constant.\n\nIn the \\(1/f^2\\) region the phase-noise density at a fixed offset frequency therefore scales as \\(f_0^2\\). Halving \\(f_0\\) lowers the phase noise by \\(6\\,\\mathrm{dB}\\).\n\n(The same factor is obtained from Hajimiri’s impulse-sensitivity expression: \\(q_{\\max}\\) doubles while the phase-averaged noise-current density is unchanged, again improving \\(\\mathcal{L}(\\Delta f)\\) by \\(6\\,\\mathrm{dB}\\).)\n\nFinal answer: decreases by 6 dB",
        "format": "markdown",
        "sha256": "38d1a19bd77bb718c43ab2de3b4ed8e409161e5905c743f750ba350e7f4a6160"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling the capacitors halves the oscillation frequency and reduces phase noise by 6 dB at a fixed offset frequency, with a consistent impulse-sensitivity justification.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3107,
        "output_tokens": 10350,
        "total_tokens": 13457,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10172,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3107,
        "output_tokens": 10350,
        "total_tokens": 13457,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10172,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator (odd number of inversions) with one node loaded by \\(C_L\\). For any finite \\(C_L\\), each inverter still drives its output fully between the rails. The loaded node therefore eventually crosses the logic threshold of the following stage, the transition propagates around the loop, and the feedback reverses the direction of charge/discharge. The only effect of increasing \\(C_L\\) is to lengthen the period; the circuit continues to produce a periodic waveform.\n\nThus the oscillator does not fail for arbitrarily large (but finite) \\(C_L\\).\n\nFinal answer: no",
        "format": "markdown",
        "sha256": "026879fe84362ae658f32c3b3697bb8e218cbd640599dee29f68e791162a88a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the essential conclusion: a sufficiently large one-node load can create a dominant pole and prevent the loop from sustaining oscillation. It recognizes that the load slows the circuit, but incorrectly assumes the only effect is a longer period and that full rail-to-rail switching must continue.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2988,
        "output_tokens": 2051,
        "total_tokens": 5039,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2988,
        "output_tokens": 2051,
        "total_tokens": 5039,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator. Its midpoint equilibrium is analyzed by breaking the loop and forming the small-signal loop gain\n\\[\nG(s)=-\\frac{A^3}{(1+s/\\omega_1)(1+s/\\omega_2)(1+s/\\omega_3)},\n\\]\nwhere the extra load appears only in the first pole (\\(\\omega_1\\propto 1/C_L\\)).\n\nBarkhausen’s criterion requires a frequency at which \\(\\angle G=-360^\\circ\\) (i.e., the three poles together contribute \\(180^\\circ\\) of phase lag) and \\(|G|\\ge 1\\). When \\(C_L\\) is arbitrarily large that frequency still exists, but the magnitude contributed by the heavily loaded stage collapses, leaving\n\\[\n|G|\\approx\\frac{A^3}{2(C_L/C)}\\ll 1.\n\\]\nThe equilibrium is therefore stable. Because the only equilibrium is asymptotically stable, no large-signal limit cycle can exist either. Consequently the circuit ceases to oscillate.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "ccedcc31ca838d1613b674ac78924f3df8a4e4d446d315937d16fbb5345a275b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly answers yes and identifies the one-node load as creating a dominant pole that drives loop gain below unity at the phase crossover, preventing sustained oscillation. The additional phase and equilibrium discussion is not needed but is consistent with the essential conclusion.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2988,
        "output_tokens": 12418,
        "total_tokens": 15406,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12184,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2988,
        "output_tokens": 12418,
        "total_tokens": 15406,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12184,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage ring oscillator. Its small-signal model about the unique equilibrium point (all nodes at the inverter switching threshold) yields the characteristic equation\n\\[\n(1+s/\\omega_x)(1+s/\\omega_y)(1+s/\\omega_z)+A^3=0,\n\\]\nwhere \\(A\\) is the DC gain of each inverter and the \\(\\omega_i\\) are the pole frequencies set by the nodal capacitances.\n\nRouth-Hurwitz analysis of this cubic shows that all roots lie in the open left half-plane once the pole associated with \\(C_L\\) becomes sufficiently small. Consequently the equilibrium is asymptotically stable for all sufficiently large \\(C_L\\). A stable equilibrium precludes sustained oscillation: every trajectory converges to the DC bias point.\n\n(The same conclusion is reached by a large-signal argument. When \\(C_L\\) is excessive the slew rate at that node is too low for the finite gain and finite bandwidth of the other two stages to satisfy the Barkhausen criterion at any frequency; any incipient oscillation is quenched.)\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "0f97dd6dbfb6ea6edd8fea6332386e3f33c072cc5929b6306828a7c8efc129b7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large CL prevents oscillation and explains that the resulting dominant pole causes loop-gain/phase failure, allowing the circuit to settle at its DC equilibrium. The Routh-Hurwitz detail is consistent with the essential conclusion.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2988,
        "output_tokens": 21127,
        "total_tokens": 24115,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2988,
        "output_tokens": 21127,
        "total_tokens": 24115,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20895,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage CMOS ring oscillator. Doubling all device widths leaves voltage waveforms, delay per stage, and oscillation frequency unchanged (drive current and load capacitance scale identically).\n\nPhase noise follows from the impulse-sensitivity-function description\n\\[\n\\mathcal{L}(\\Delta\\omega)\\propto\\frac{\\overline{i_n^2}/\\Delta f}{q_{\\max}^2}.\n\\]\nBoth the relevant noise current densities and \\(q_{\\max}=C V_{\\rm swing}\\) scale directly with width, so \\(\\mathcal{L}\\) falls by exactly \\(3\\,\\rm dB\\).\n\nFinal answer: decreases by 3 dB",
        "format": "markdown",
        "sha256": "b28b7c3fb588fbe27de0c8dd537dd83b88ecce908b179c22d92f1c83bb039f4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts a 3 dB phase-noise reduction and gives the valid scaling: noise-current power scales with width, while squared signal charge scales with width squared.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3724,
        "output_tokens": 5448,
        "total_tokens": 9172,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5313,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3724,
        "output_tokens": 5448,
        "total_tokens": 9172,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5313,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage CMOS ring oscillator. Doubling all device widths leaves the stage delay (and thus the oscillation frequency) unchanged, because both drive current and load capacitance scale by the same factor. Power dissipation therefore doubles.\n\nIn the \\(1/f^2\\) region the single-sideband phase noise of a ring oscillator satisfies\n\\[\n\\mathcal{L}(\\Delta f)\\propto\\frac{1}{P}\\Bigl(\\frac{f_0}{\\Delta f}\\Bigr)^2.\n\\]\nWith \\(f_0\\) constant, doubling \\(P\\) therefore lowers \\(\\mathcal{L}(\\Delta f)\\) by exactly 3 dB.\n\nFinal answer: decreases by 3 dB",
        "format": "markdown",
        "sha256": "61b995d66b05cc8c3be8eda5cae669d1281700ec4aba24453e780124ff98982c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling all device widths reduces phase noise by 3 dB; the golden solution explicitly awards full credit for this result.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3724,
        "output_tokens": 7465,
        "total_tokens": 11189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7318,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3724,
        "output_tokens": 7465,
        "total_tokens": 11189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7318,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage CMOS ring oscillator. Doubling every device width (at constant \\(V_{DD}\\)) scales both the load capacitance of each stage and the charging/discharging current by the same factor. Consequently the stage delay, and therefore the oscillation frequency, remain unchanged while the power dissipation doubles.\n\nBoth the \\(kT/C\\) and the device-current-noise pictures of the timing error show that the jitter contributed by each transition then falls as \\(1/\\sqrt{W}\\). Because the \\(1/f^{2}\\) phase-noise density is proportional to this jitter variance (and the frequency is unchanged), the phase noise itself decreases by \\(3\\,\\mathrm{dB}\\).\n\nFinal answer: decreases by 3 dB",
        "format": "markdown",
        "sha256": "eed1d9d31a2e751ca76bd95c6a949a6668b9fdbd3214957e950a14302fdc09c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB phase-noise reduction. Width scaling doubles current and node capacitance, keeping frequency approximately unchanged; the stated jitter variance then falls by a factor of two.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3724,
        "output_tokens": 5608,
        "total_tokens": 9332,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3724,
        "output_tokens": 5608,
        "total_tokens": 9332,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The supply terminals of the three inverters are connected in parallel to the common node at which the driving-point resistance is required. Each inverter is realized as a CMOS pair. Channel-length modulation and body effect are neglected, so the only small-signal parameters that appear are the transconductances \\(g_{mn}\\) and \\(g_{mp}\\).\n\nAt the only equilibrium consistent with the ring connection, every internal node sits at the inverter trip point. A small test voltage \\(v_x\\) applied to the common supply node therefore produces, by symmetry, an identical small-signal voltage \\(v_y\\) at each of the three internal nodes. Current balance at the output of any one inverter then fixes the ratio\n\\[\nv_y=\\frac{g_{mp}}{g_{mn}+g_{mp}}v_x.\n\\]\nThe current drawn from the supply by the PMOS device of that inverter is\n\\[\ng_{mp}(v_x-v_y)=\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}v_x.\n\\]\nThree identical inverters contribute the same current, so the total current \\(i_x\\) entering the supply node satisfies\n\\[\nR_x=\\frac{v_x}{i_x}=\\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right).\n\\]\n(The same result is obtained by observing that the symmetric solution is electrically identical to three separate inverters, each diode-connected between the supply rail and ground, placed in parallel.)\n\nFinal answer: \\(\\dfrac{1}{3}\\left(\\dfrac{1}{g_{mn}}+\\dfrac{1}{g_{mp}}\\right)\\)",
        "format": "markdown",
        "sha256": "574d6edd1de51e4a030f99c4073db6af1754db3c19988fb2cf5c306e1378391d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a consistent static, gm-based resistance but ignores the oscillation-driven charging and discharging of the load capacitances, which sets the supply-node resistance in the ring oscillator.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3720,
        "output_tokens": 34157,
        "total_tokens": 37877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33784,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3720,
        "output_tokens": 34157,
        "total_tokens": 37877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33784,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of three identical CMOS inverters connected in a ring, with all supply terminals tied to the common node of interest. The small-signal resistance looking into this node is evaluated at the DC equilibrium in which every inverter sits at its logic threshold.\n\nA test voltage applied to the common supply node is a purely common-mode excitation. Consequently the three internal nodes undergo identical voltage excursions, and each inverter behaves as though its input were shorted to its output. With body effect and channel-length modulation neglected, the test voltage appears entirely across the series combination of the NMOS and PMOS gate-source ports while the same small-signal current flows through both devices. The resistance contributed by one inverter is therefore\n\\[\n\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}.\n\\]\nThe three inverters appear in parallel, yielding the supply-node resistance\n\\[\nR_x=\\frac13\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right).\n\\]\n\nFinal answer: \\(\\dfrac{1}{3}\\left(\\dfrac{1}{g_{mn}}+\\dfrac{1}{g_{mp}}\\right)\\)",
        "format": "markdown",
        "sha256": "0bc0e1b359d79742fe4362819cbd052378895b9117ce7c1d3e1f91c83cd49e9c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer analyzes a static gm-based resistance and misses the dominant oscillation-driven charging and discharging of the load capacitances. The golden solution assigns this static derivation a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3720,
        "output_tokens": 28073,
        "total_tokens": 31793,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27824,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3720,
        "output_tokens": 28073,
        "total_tokens": 31793,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27824,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The only DC operating point of the ring oscillator occurs when each inverter is biased at its switching threshold. For matched NMOS and PMOS devices this point lies at \\(V_x/2\\).\n\nNeglect channel-length modulation and denote the transconductance of each transistor by \\(g_m\\). Linearization about the operating point then shows that a small change \\(v_x\\) in the supply forces every internal node voltage to \\(v_x/2\\). Consequently each inverter draws an incremental supply current\n\\[\ni = g_m(v_x - v_x/2) = \\frac{g_m}{2}v_x.\n\\]\nWith three identical stages the total current drawn from the supply node is\n\\[\ni_x = 3\\cdot\\frac{g_m}{2}v_x.\n\\]\nThe small-signal resistance seen at that node is therefore\n\\[\nR_x = \\frac{v_x}{i_x} = \\frac{2}{3g_m}.\n\\]\n\nFinal answer: \\(\\dfrac{2}{3g_m}\\)",
        "format": "markdown",
        "sha256": "221d1e4f499bcdcc202e951e077b13195c93b1da6c9c973f39ade8aa351544e5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer analyzes only a static, threshold-biased operating point and gives a gm-based resistance. It misses the dominant oscillation-driven charging and discharging of the node capacitances, which sets the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3720,
        "output_tokens": 19663,
        "total_tokens": 23383,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19426,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3720,
        "output_tokens": 19663,
        "total_tokens": 23383,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19426,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given expression is the low-frequency small-signal resistance evaluated at the unstable DC equilibrium (the only point at which every inverter satisfies \\(V_\\text{in}=V_\\text{out}\\) and therefore behaves as two diode-connected MOSFETs in series).\n\nOnce the circuit is actually oscillating, that equilibrium is left behind. Each stage then has a large, time-varying \\(V_\\text{GS}\\neq V_\\text{DS}\\), the diode-connected identification ceases to be valid, and the current drawn from the supply node is set by the large-signal switching dynamics. Consequently the resistance seen at the supply node is no longer given by the equilibrium formula.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "ba7033d83e18770e2413063b2f38393a1805e5bde095710361268a76c59f44b6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It notes that oscillation invalidates the static diode-connected analysis, but does not identify capacitive charging as the supply-current mechanism or establish that the resulting resistance remains on the order of the MOS on-resistance rather than becoming much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3803,
        "output_tokens": 11093,
        "total_tokens": 14896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10951,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3803,
        "output_tokens": 11093,
        "total_tokens": 14896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10951,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal resistance is defined by linearizing every device about the unique DC equilibrium at which all three stage outputs sit at the inverter threshold. Symmetry of that equilibrium forces the three small-signal output voltages to be identical. Consequently each inverter contributes exactly the series combination of a diode-connected NMOS and a diode-connected PMOS, the three branches stand in parallel, and\n\n\\[\nR_X=\\frac13\\Bigl(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\Bigr).\n\\]\n\n(The same expression is recovered by writing the full set of small-signal KCL equations and solving for the port admittance, confirming that the diode-connected picture is not merely heuristic.)\n\nThe numerical value of this admittance is fixed solely by the topology and by the two transconductances evaluated at the equilibrium point. Whether the equilibrium is stable is a separate question that is answered only after the load capacitances are restored and the poles of the resulting dynamical system are examined. Those poles may lie in the right half-plane (the circuit oscillates), yet they do not appear in the expression for the zero-frequency port resistance. Hence the value of \\(R_X\\) is unchanged.\n\nFinal answer: no",
        "format": "markdown",
        "sha256": "7f92312fe630f31d8be03c37fcdc89aaaed27d2431b8e29edbabf0e11f776173"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It says the static result is unchanged but does not account for the oscillation’s capacitive charging and discharging, which sets the supply resistance. The golden solution allows partial credit for claiming the static result still holds without that mechanism.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3803,
        "output_tokens": 22063,
        "total_tokens": 25866,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21811,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3803,
        "output_tokens": 22063,
        "total_tokens": 25866,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21811,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal resistance in question is obtained by linearizing the circuit at its DC equilibrium and evaluating the driving-point resistance at the supply port (all capacitances open). By symmetry that equilibrium has every inverter input/output node at the same potential \\(V_M\\). Consequently a small DC test voltage applied at the supply moves every internal node by exactly the same amount, each inverter behaves as a series combination of a diode-connected NMOS and PMOS, and\n\\[\nR_X=\\frac13\\Bigl(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\Bigr).\n\\]\n(The same algebraic result is obtained by writing the full set of small-signal KCL equations around the ring and solving; the ring connections never have to be replaced by physical shorts.)\n\nWhether the equilibrium is stable is a separate question that is answered only by the poles of the dynamic (capacitive) small-signal model. Those poles do not appear in the resistive network that defines \\(R_X\\), so the value of the resistance is identical for a circuit that will oscillate and for one that will not.\n\nFinal answer: no",
        "format": "markdown",
        "sha256": "2e96f2c666e4393a274ceef0ee74877267d9badb3d964ac1bfedde1d01d507ef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The conclusion that the resistance remains roughly on the order of the static estimate is compatible with the golden answer, but the reasoning treats the oscillating circuit as a DC small-signal network and claims the result is identical. It misses the required capacitive charging/discharging mechanism that sets the supply current during oscillation.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3803,
        "output_tokens": 11200,
        "total_tokens": 15003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10965,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3803,
        "output_tokens": 11200,
        "total_tokens": 15003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10965,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch. In the initial integration phase after the clock edge (before the cross-coupled devices turn on), a differential voltage develops at the intermediate nodes according to\n\\[\nA_v=\\frac{2g_mV_{TH}}{I_{D7}}.\n\\]\nBecause \\(g_m\\propto\\sqrt{I_{D7}}\\) while \\(I_{D7}\\propto W_7\\), the gain simplifies to \\(A_v\\propto1/\\sqrt{W_7}\\). Consequently the initial voltage gain falls as the width of \\(M_7\\) is increased.\n\nFinal answer: decreases",
        "format": "markdown",
        "sha256": "9971c03c511b22ade9726196fec415b6280be81f582e9123efd2c43821ca524c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the initial gain decreases as M7 widens and explains that increased tail current grows faster than the input-pair transconductance, reducing the gain.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3745,
        "output_tokens": 4538,
        "total_tokens": 8283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4407,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3745,
        "output_tokens": 4538,
        "total_tokens": 8283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4407,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch. After the clock edge, an initial integration phase occurs on the internal nodes before positive-feedback regeneration begins. The differential voltage developed in this phase (i.e., the initial voltage gain) is proportional to \\(g_m/I_D\\) of the input pair.\n\nIncreasing the width of \\(M_7\\) raises the discharge current. With device widths of the input pair held fixed, the higher current increases their overdrive, which lowers \\(g_m/I_D\\) and therefore reduces the initial voltage gain.\n\nFinal answer: decreases",
        "format": "markdown",
        "sha256": "5bd0995d341838ac132553fbd27dae3089ac139e931f6b3bae9e5f69c78fc8f2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that increasing M7 width raises tail current, reducing the input pair’s gm/ID and thus the initial voltage gain.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3745,
        "output_tokens": 4057,
        "total_tokens": 7802,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3939,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3745,
        "output_tokens": 4057,
        "total_tokens": 7802,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3939,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch. Its initial voltage gain (developed on the intermediate nodes during the first phase of operation, before regeneration begins) is \\(2V_{TN}/V_{OV}\\).\n\nIncreasing the width of \\(M_7\\) lowers the equilibrium voltage at the common source node of \\(M_1\\)-\\(M_2\\). This raises the overdrive \\(V_{OV}\\) of the input pair and therefore lowers the initial voltage gain.\n\nFinal answer: decreases",
        "format": "markdown",
        "sha256": "cad1327ffa75de98487e103ea17368fe8172d013b51e4313ed20b4a403b52a21"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain decreases. The explanation that a wider M7 lowers the input pair’s common-source voltage, increasing its overdrive and reducing the gain factor, is physically consistent with the golden solution.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3745,
        "output_tokens": 12680,
        "total_tokens": 16425,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12581,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3745,
        "output_tokens": 12680,
        "total_tokens": 16425,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12581,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch. After the clock edge enables the tail device, nodes \\(P\\) and \\(Q\\) are discharged by the input pair. A differential voltage therefore develops on those nodes and is subsequently transferred to the output nodes \\(X\\) and \\(Y\\).\n\nCharge-conservation analysis of the two limiting cases yields a simple, device-independent result. At the instant the output common-mode level has fallen by one PMOS threshold (the onset of full regenerative latching):\n\n- when \\(C_P,C_Q\\to 0\\) the differential output voltage is only \\((\\delta I/I)|V_{Tp}|\\);\n- when \\(C_P,C_Q\\to\\infty\\) the same differential output voltage grows to \\((\\delta I/I)(V_{Tn}+|V_{Tp}|)\\).\n\nBecause \\(V_{Tn}+|V_{Tp}|>|V_{Tp}|\\), the voltage gain realized before regeneration increases with \\(C_P\\) and \\(C_Q\\). (The same monotonic trend appears for any practical device strength whenever the intermediate-node capacitance lies below the output-node capacitance, the usual situation in a StrongARM layout.)\n\nFinal answer: it increases",
        "format": "markdown",
        "sha256": "7d99a8325f39eaa55f0b67fd3561a9f953bcce48de32b0f78d62986fe040d407"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies the StrongARM latch and the node-discharge phase, but its central conclusion is opposite to the correct result. Larger capacitance slows discharge while proportionally extending amplification, so the capacitance cancels and the initial gain remains approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3712,
        "input_tokens": 3744,
        "output_tokens": 55432,
        "total_tokens": 59176,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 55181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3712,
        "input_tokens": 3744,
        "output_tokens": 55432,
        "total_tokens": 59176,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 55181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch. Its operation begins with a dynamic amplification phase (prior to strong regenerative feedback from the cross-coupled PMOS devices). In this phase a differential current set by \\(V_\\text{in}\\) is integrated on the capacitances at \\(P\\)/\\(Q\\) and \\(X\\)/\\(Y\\).\n\nCharge conservation on those nodes shows that the differential voltage that appears between \\(X\\) and \\(Y\\) at the end of the phase contains a term proportional to \\(C_P\\) (and \\(C_Q\\)). Consequently the voltage gain realized by the end of the phase rises when the capacitances at \\(P\\) and \\(Q\\) are increased. (The same monotonic dependence is obtained from both a fixed-gate analysis and a full cross-coupled analysis of the NMOS pair.)\n\nFinal answer: it increases",
        "format": "markdown",
        "sha256": "b09b8e01701729e427b1abb9e6da1a5fe7632cc0d3fbfbda7b8967110282d552"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer identifies the latch and capacitive integration, but reaches the opposite conclusion. Larger capacitance proportionally lengthens the amplification phase, so its effect cancels and the initial gain remains approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3712,
        "input_tokens": 3744,
        "output_tokens": 48905,
        "total_tokens": 52649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 48731,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3712,
        "input_tokens": 3744,
        "output_tokens": 48905,
        "total_tokens": 52649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 48731,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch. In the first operating phase after the rising clock edge, \\(M_3\\)/\\(M_4\\) remain off while \\(M_1\\)/\\(M_2\\) act as a dynamic differential pair that discharges nodes \\(P\\) and \\(Q\\).\n\nWith the common-source node held near ground, the discharge currents are essentially constant. The common-mode voltage on \\(P\\)/\\(Q\\) therefore falls by one NMOS threshold in a time\n\\[\nt_1\\propto C_{P,Q}.\n\\]\nThe differential voltage that develops in the same interval is\n\\[\n\\Delta V_{PQ}=\\frac{\\Delta I\\cdot t_1}{C_{P,Q}}.\n\\]\nThe capacitance cancels, leaving\n\\[\n\\frac{\\Delta V_{PQ}}{\\Delta V_{\\rm in}}\n\\]\n(the initial voltage gain) dependent only on the relative current imbalance of \\(M_1\\)/\\(M_2\\) and independent of \\(C_{P,Q}\\).\n\nThus increasing the capacitance at \\(P\\) and \\(Q\\) leaves the initial voltage gain unchanged.\n\nFinal answer: remains unchanged",
        "format": "markdown",
        "sha256": "e34669075b81df5bbfe5f6744e51c91fcc2428e7f9ede5d32cc0bfd9f1a92e31"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes the initial gain is unchanged and explains the key cancellation: larger capacitance proportionally lengthens the amplification interval while slowing differential-voltage buildup.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3744,
        "output_tokens": 7127,
        "total_tokens": 10871,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6884,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3744,
        "output_tokens": 7127,
        "total_tokens": 10871,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6884,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch. M5 and M6 are the cross-coupled PMOS devices. Their widths contribute both diffusion capacitance and (via the cross-coupling) gate capacitance directly at the regenerative nodes \\(X\\) and \\(Y\\).\n\nThe current available to discharge those nodes is set by the unchanged devices M1–M4 and M7. Consequently the larger capacitance lengthens the time needed for the common-mode voltage to fall and for a differential voltage to develop. In the subsequent regeneration interval the same capacitance appears in the time constant \\(\\tau=C/(g_{m3}+g_{m5})\\). Because \\(C\\) grows linearly with \\(W_{5,6}\\) while \\(g_{m5}\\) grows only as \\(\\sqrt{W_{5,6}}\\) (current-limited operation), \\(\\tau\\) does not decrease enough to offset the extra delay. The net result is a longer clock-to-decision time.\n\nFinal answer: degrade",
        "format": "markdown",
        "sha256": "556665cdf0b2bb36c3a285a23a5fbd6706519c638655bbd6e3151a812c14d346"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies M5/M6 as cross-coupled regenerative devices and recognizes that widening adds capacitance while increasing transconductance. However, it incorrectly concludes that capacitance dominates from the outset; the initial speed improvement from stronger regeneration is the central result.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3712,
        "input_tokens": 3744,
        "output_tokens": 19504,
        "total_tokens": 23248,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19307,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3712,
        "input_tokens": 3744,
        "output_tokens": 19504,
        "total_tokens": 23248,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19307,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch. M5/M6 are the cross-coupled PMOS devices that both regenerate the output and contribute parasitic capacitance at the critical nodes \\(X\\) and \\(Y\\).\n\nBecause the discharge current that develops the initial differential is set by the input pair and tail device, that current does not rise when M5/M6 are widened. The added capacitance therefore lengthens the time needed to reach the regeneration region. In regeneration itself \\(g_m\\) grows only as \\(\\sqrt{W}\\) while \\(C\\) grows linearly with \\(W\\), so the regeneration time constant also becomes worse for any practical sizing and load. Both contributions increase delay.\n\nThus the speed degrades.\n\nFinal answer: degrades",
        "format": "markdown",
        "sha256": "e273a6c350777c247c3674769fac49fd0009a0c89b85873d8decd531a5a06915"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M5/M6 as cross-coupled PMOS devices and notes their added parasitic capacitance, but concludes speed degrades. It misses that stronger regeneration dominates initially, so the central trend is wrong.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3744,
        "output_tokens": 41016,
        "total_tokens": 44760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 40867,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3744,
        "output_tokens": 41016,
        "total_tokens": 44760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 40867,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM latch. \\(M_5\\) and \\(M_6\\) are the cross-coupled PMOS devices that, together with \\(M_3\\)-\\(M_4\\), supply the positive feedback responsible for regeneration.\n\nWidening \\(M_5\\) and \\(M_6\\) directly raises their transconductance. The regeneration time constant \\(C_L/(g_{mN}+g_{mP})\\) therefore falls, so the latch resolves a given differential voltage more quickly. (The accompanying rise in parasitic capacitance is second-order for practical device sizes and does not reverse the net improvement in delay.)\n\nFinal answer: improves",
        "format": "markdown",
        "sha256": "b441aa8e395efd77bca2b869449357d949f656a744edcf453ceb510edd1b08ec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the PMOS regenerative devices and explains why increased transconductance initially speeds regeneration. However, it does not state that added capacitance eventually causes diminishing returns or an optimum width, and instead suggests the capacitance does not reverse the improvement.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3712,
        "input_tokens": 3744,
        "output_tokens": 19334,
        "total_tokens": 23078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19199,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3712,
        "input_tokens": 3744,
        "output_tokens": 19334,
        "total_tokens": 23078,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19199,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of clocked CMOS (C\\(^2\\)MOS) stages. The clocked devices lie in series in the pull-up and pull-down paths, so widening them lowers stack resistance. At the same time their diffusion capacitances appear directly on the output nodes (and on the intermediate stack nodes).\n\nUnder the usual capacitance ratio \\(\\gamma\\approx 1\\) and with the device widths implied by the schematic, the self-loading term dominates. Elmore analysis of both the rising and falling transitions shows that the net stage delay therefore increases. Because the maximum clock frequency of the loop is set by these stage delays, the operating speed degrades.\n\nFinal answer: degrades",
        "format": "markdown",
        "sha256": "eab730d2813935878e3c949d53ebff839eb1707fdf0e565ee955c9985a81895d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that widening lowers clocked-device resistance but concludes the speed degrades due to added capacitance. The golden solution says that a degradation conclusion earns 2; the expected trend is initial improvement before capacitance limits or reverses it.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2999,
        "output_tokens": 33556,
        "total_tokens": 36555,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33418,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2999,
        "output_tokens": 33556,
        "total_tokens": 36555,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33418,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a pair of C2MOS inverters placed in a feedback loop with the static inverter. The devices gated by \\(CK\\) and \\(\\overline{CK}\\) lie in series in every pull-up and pull-down path and have their drains attached directly to the dynamic nodes \\(X\\) and \\(Y\\).\n\nWidening those devices therefore produces two opposing changes in the Elmore delay of each C2MOS stage:\n- channel resistance falls, which tends to reduce delay,\n- diffusion capacitance on both the output node and the intermediate source/drain node rises, which tends to increase delay.\n\nWith the capacitance and resistance ratios that are standard for static CMOS (diffusion capacitance per unit width comparable to gate capacitance, PMOS devices twice as wide as NMOS devices, fan-out near unity), the delay of a stage takes the form\n\\[\n\\tau(W)=aW+b/W+c\n\\]\nwhere \\(W\\) is the width of the clocked transistors normalized to the logic transistors. The minimum lies near \\(W\\approx0.9\\). Consequently any increase beyond the widths already comparable to the logic devices (the usual sizing, and the sizing suggested by the identical transistor symbols in the schematic) moves the design past the optimum and lengthens the delay.\n\nBecause the maximum clock frequency at which the loop operates correctly is set by these stage delays, the speed of the circuit degrades.\n\nFinal answer: degrades",
        "format": "markdown",
        "sha256": "e6a894c746dca8f0ad63a5bb4c648bde78c82c8bd06495e2714c0d06399354fa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the resistance-versus-capacitance tradeoff and an optimum, but concludes that widening degrades speed rather than stating the required initial improvement. The golden solution assigns 2 to answers with that conclusion.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2999,
        "output_tokens": 34193,
        "total_tokens": 37192,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33902,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2999,
        "output_tokens": 34193,
        "total_tokens": 37192,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33902,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a dynamic divide-by-2 circuit (toggle flip-flop). The left clocked inverter is enabled on \\(CK = 1\\) and the right clocked inverter is enabled on \\(CK = 0\\). Consequently each full clock cycle inverts the state held on \\(Z\\).\n\nCorrect operation at a clock frequency \\(f\\) therefore requires the propagation delay of the left stage to be shorter than the clock-high interval and the combined propagation delay of the right stage plus \\(\\mathrm{Inv}_3\\) to be shorter than the clock-low interval. The highest usable \\(f\\) (i.e., the speed of the circuit) is set by these two delays.\n\nBoth delays are the delays of series transistor stacks whose output nodes (\\(X\\) and \\(Y\\)) carry the diffusion capacitance of the clocked devices. Under the diffusion-to-gate capacitance ratios that are standard in digital-circuit analysis, those delays are already past their minima when every transistor has the same width (the only width consistent with the unlabeled schematic). Increasing the clocked-device widths therefore lengthens both critical delays, forcing a lower maximum clock frequency.\n\nHence the speed degrades.\n\nFinal answer: degrades",
        "format": "markdown",
        "sha256": "ebb5c96085d192e210285353fdec9c8ff0362341f608a1720d818a0c882f6d75"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that wider clocked devices add capacitance, but concludes speed degrades and misses the initial improvement from reduced on-resistance.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2999,
        "output_tokens": 57203,
        "total_tokens": 60202,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 56958,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2999,
        "output_tokens": 57203,
        "total_tokens": 60202,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 56958,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two clocked inverting stages whose outputs are denoted \\(X\\) and \\(Y\\), together with a static inverter that produces \\(Z=\\overline{Y}\\). The left stage is enabled only while \\(CK=1\\) and realizes \\(X=\\overline{Z}\\); the right stage is enabled only while \\(CK=0\\) and realizes \\(Y=\\overline{X}\\). (When a stage is disabled its output simply holds dynamically.)\n\nBecause the two stages are enabled on opposite phases of \\(CK\\) and the loop contains an odd number of inversions, both \\(X\\) and \\(Y\\) toggle at half the frequency of \\(CK\\). Explicit enumeration of the successive half-cycles shows that the transitions of \\(X\\) are displaced from those of \\(Y\\) by exactly one-quarter of the output period. Consequently \\(X\\) and \\(Y\\) (and likewise \\(X\\) and \\(Z\\)) form a quadrature pair.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "c2a9a9bde7496754538426a05c651fe57c1e1fed34f696089384c9fac270b5fa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature relationship, but claims it is exact and omits both the inverter delay and unequal latch loading that make the outputs non-ideal.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2944,
        "input_tokens": 2984,
        "output_tokens": 13498,
        "total_tokens": 16482,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13300,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2944,
        "input_tokens": 2984,
        "output_tokens": 13498,
        "total_tokens": 16482,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13300,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a pair of oppositely phased dynamic clocked inverters closed by a static inverter, forming a loop that is transparent on alternate half-cycles of the applied clock \\(CK\\).\n\nBecause each dynamic node is written on one phase and held on the other, the loop realizes a frequency divider. Direct enumeration of the successive half-cycle states shows that the two dynamic nodes \\(X\\) and \\(Y\\) are square waves at \\(f_{CK}/2\\) whose transitions are separated by exactly one-quarter of their common period. Consequently \\(X\\) and \\(Y\\) (and likewise \\(X\\) and \\(Z=\\overline{Y}\\)) constitute a quadrature pair.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "e93569c789ad544ae8dbdd0214874135c2def7893b34dc8cc3f225d77ff973c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the nominal divide-by-two quadrature from the alternating latch phases, but incorrectly presents the spacing as exact and omits the inverter delay and unequal latch loading that make the outputs non-ideal.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2984,
        "output_tokens": 13110,
        "total_tokens": 16094,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12967,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2984,
        "output_tokens": 13110,
        "total_tokens": 16094,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12967,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of two dynamic clocked inverters closed into a loop by a static inverter. The left stage is transparent on one phase of the external clock while the right stage is transparent on the opposite phase (with dynamic storage on the disabled phase).\n\nWalking through the resulting state sequence shows that both \\(X\\) and \\(Y\\) are square waves at half the input clock frequency and that their edges are separated by exactly one-quarter of that period. The two signals are therefore in quadrature.\n\nFinal answer: yes",
        "format": "markdown",
        "sha256": "27ee057b2f9847df35f92792a9a5208fe3c75c0dfd98913669d6f22fb1f0ed15"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies nominal divide-by-two quadrature, but claims the phase separation is exact and omits both nonidealities: Inv3 delay and unequal loading of the latch outputs.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2984,
        "output_tokens": 9330,
        "total_tokens": 12314,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9227,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2984,
        "output_tokens": 9330,
        "total_tokens": 12314,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9227,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of complementary clock-phase-enabled paths (clocked inverters) driving a common node, with static inversion and feedback. The transistors gated by \\(CK\\) and \\(\\overline{CK}\\) lie in series with the logic devices and adjacent to the supply rails.\n\nElmore analysis of a series stack yields a path delay of the form\n\\[\n\\tau=(R_\\text{logic}+R_\\text{clk})C_L+R_\\text{clk}C_\\text{int}.\n\\]\nBecause \\(R_\\text{clk}\\propto1/W_\\text{clk}\\) while the internal diffusion capacitance that multiplies \\(R_\\text{clk}\\) grows only linearly with \\(W_\\text{clk}\\), every term that depends on \\(W_\\text{clk}\\) is non-increasing. Consequently \\(\\tau\\) falls monotonically as the clocked devices are widened, independent of the precise capacitance coefficients.\n\n(The same monotonic improvement appears for both the transparent/write path and the regenerative/feedback path.) Hence the circuit becomes faster.\n\nFinal answer: improves",
        "format": "markdown",
        "sha256": "9fdcab3611ea553a0ed2ae54df7fb34cde04cb6ba2ff4db66cec41d7504f787b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked devices improves speed because it lowers their series resistance. It omits the charge-sharing swing degradation, which the golden solution requires for full credit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3055,
        "output_tokens": 31161,
        "total_tokens": 34216,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30944,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3055,
        "output_tokens": 31161,
        "total_tokens": 34216,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30944,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit consists of a pair of clock-enabled inverters operating on complementary clock phases, with outputs shorted and fed back through a static inverter. The transistors gated by \\(CK\\) and \\(\\overline{CK}\\) lie in series with the signal transistors and sit closest to the supply rails.\n\nWhen a given phase is enabled, these clocked devices are on. Increasing their widths lowers the series resistance that appears in the Elmore (or equivalent RC) delay expression for both pull-up and pull-down transitions. The accompanying growth in intermediate-node diffusion capacitance produces only constant or weakly growing terms that are more than offset by the explicit \\(1/W\\) improvement; consequently every relevant time constant shrinks. The capacitive load presented to the static inverter is set by the gates of the inner (non-clocked) transistors and is therefore unchanged.\n\nThe same sizing change shortens the regenerative time constant of the feedback loop. Hence the speed of the circuit improves.\n\nFinal answer: improves",
        "format": "markdown",
        "sha256": "7b0b8646e2f62193fd827fc0c253bba007eb4405408c26913d48848921493744"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked devices improves speed by reducing series resistance and adding little output loading. It omits the charge-sharing swing degradation that limits the improvement, so it does not earn full credit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3055,
        "output_tokens": 59460,
        "total_tokens": 62515,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 59263,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3055,
        "output_tokens": 59460,
        "total_tokens": 62515,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 59263,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit contains multiple transistors explicitly gated by \\(CK\\) and \\(\\overline{CK}\\). These devices lie in series with the signal transistors and attach diffusion capacitance directly to the internal nodes (including the node that drives the inverter).\n\nBecause the devices are clocked, they are cut off during at least one of the transitions that set the circuit’s critical delay. While they are off they contribute only capacitance; they furnish no additional pull-up or pull-down current. Enlarging them therefore increases the capacitive load that must be charged or discharged by the transistors that remain on, lengthening the Elmore delay of the critical path.\n\n(The reduction in on-resistance that accompanies the width increase is unavailable during the critical transition, so it cannot offset the added capacitance.) Consequently every increase in the widths of the clocked transistors raises the delay.\n\nFinal answer: degrades",
        "format": "markdown",
        "sha256": "9b3917628812c64d9a4d3440662417044887fb992b056bfac49f49b1f13337dc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the central result: widening the clocked devices improves speed by lowering series resistance, with their added capacitance largely off the output data path. Its claim that widening necessarily degrades speed misidentifies the dominant effect.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3055,
        "output_tokens": 59286,
        "total_tokens": 62341,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 59112,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3055,
        "output_tokens": 59286,
        "total_tokens": 62341,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 59112,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a single closed loop of three inverters with two series switches controlled by complementary clocks, \\(CK\\) and \\(\\overline{CK}\\). The output of the last inverter is fed back to the input of the \\(CK\\) switch.\n\n**Inversion parity.** Three inverters make the loop inverting overall. A continuously closed loop with an odd number of inversions has no stable state and would free-run as a ring oscillator, with a period of about six inverter delays.\n\n**The switches prevent free-running.** Assuming a switch conducts when its control is high, \\(CK\\) and \\(\\overline{CK}\\) are never high at the same time. In one phase only the left switch conducts; in the other only the \\(\\overline{CK}\\) switch conducts. The regenerative loop is therefore broken in both phases, so the circuit does not oscillate on its own.\n\n**What it does instead.** Each open switch leaves the following inverter input floating, so that node holds its value dynamically as stored charge. Tracing the two phases:\n\n- \\(CK=1\\): the feedback value is sampled onto Inv1 and inverted, while the downstream pair holds.\n- \\(CK=0\\): Inv1’s result is released into the two-inverter pair, and that value propagates back to the feedback node.\n\nBecause Inv1 has already inverted the sampled value, the feedback node returns inverted. It therefore toggles once per clock cycle and repeats only every two cycles — a divide-by-2, i.e. a toggle (T) flip-flop function, paced by the clock rather than by gate delay.\n\n**Caveats.** Operation is dynamic: the clock must be fast enough that leakage does not corrupt the floating nodes, and those nodes float every phase, so a slow or stopped clock leaves inverter inputs undefined. Non-overlapping phases are preferable; if \\(CK\\) and \\(\\overline{CK}\\) overlap, both switches conduct briefly, the odd loop closes momentarily, and a runt pulse or burst of ring oscillation can occur.",
        "format": "markdown",
        "sha256": "7b73396a08ddcfe2759bc1994571e4066eea2e8999a10def9b8d0d36ebc75058"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a divide-by-two and describes clocked sampling with dynamic charge storage. The detailed inverter-path explanation is not required for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2353,
        "output_tokens": 11163,
        "total_tokens": 13516,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2353,
        "output_tokens": 11163,
        "total_tokens": 13516,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure is a three-inverter feedback loop broken by two series switches driven by complementary clocks \\(CK\\) and \\(\\overline{CK}\\).\n\n**Topology.** The output of the rightmost inverter is wired back to the input side, so the signal path is a ring: feedback node → \\(CK\\) switch → \\(\\mathrm{Inv}_1\\) → \\(\\overline{CK}\\) switch → second inverter → third inverter → feedback. Three inversions is an odd count, which is the usual condition for a ring oscillator.\n\n**Why it does not free-run.** A ring oscillator needs that loop closed at the same time. Here the switches are controlled by complementary clocks, so they are never both on (assuming \\(CK\\) and \\(\\overline{CK}\\) do not overlap). In each phase the ring is open:\n\n- \\(CK=1\\), \\(\\overline{CK}=0\\): feedback reaches \\(\\mathrm{Inv}_1\\), but \\(\\mathrm{Inv}_1\\)’s output is cut off from the rest of the chain.\n- \\(CK=0\\), \\(\\overline{CK}=1\\): \\(\\mathrm{Inv}_1\\) can drive the following inverters, but the feedback into \\(\\mathrm{Inv}_1\\) is open.\n\nThere is therefore no continuous regenerative path, and the circuit does not oscillate the way an ungated three-inverter ring would.\n\n**What the nodes do instead.** While a switch is open, the node on its far side is floating and only holds its last voltage on capacitance (dynamic storage). Each phase moves or isolates charge; it does not sustain a running oscillation. Leakage will eventually corrupt those floating levels if a phase is held too long.\n\n**Edge cases.** A long overlap in which both switches conduct can briefly close the odd-inversion loop and produce a runt pulse or a short burst, not stable periodic oscillation. If both switches were gated by the same clock, the loop would oscillate whenever that clock was high.",
        "format": "markdown",
        "sha256": "248cd8d447ca49d7aca95edddbf226f8b217ccac190ba154f58c61a697bc6d9c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the circuit as a gated ring oscillator and concludes it does not oscillate, missing the essential function: a dynamic-latch divide-by-two. Mentioning floating charge and leakage does not capture the divider operation.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2353,
        "output_tokens": 2766,
        "total_tokens": 5119,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2366,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2353,
        "output_tokens": 2766,
        "total_tokens": 5119,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2366,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a closed loop of three inverters with two series switches inserted in the loop, driven by complementary clocks \\(CK\\) and \\(\\overline{CK}\\).\n\n## Topology\n- Signal path: feedback node → \\(CK\\) switch → Inv₁ → \\(\\overline{CK}\\) switch → inverter → inverter → back to the feedback node.\n- Three inversions make the loop inverting overall (odd).\n- Because the switch controls are complementary, exactly one switch is closed at a time in normal operation, so the loop is never closed as a DC path.\n\n## Behavior\nThe open switch isolates a node, and that node holds its logic level on parasitic capacitance. The circuit is therefore a two-phase dynamic ring, not a free-running ring oscillator:\n\n- \\(CK=1\\), \\(\\overline{CK}=0\\): the first switch passes the feedback value to Inv₁; the second switch is open, so the following node holds its old value.\n- \\(CK=0\\), \\(\\overline{CK}=1\\): the first switch opens and holds Inv₁’s input; the second switch closes and passes Inv₁’s output into the remaining two inverters, which drive the feedback node.\n\nTracing one full clock cycle, the value stored at Inv₁’s input is returned through three inversions, so it is inverted once per clock period. Every node therefore toggles once per clock cycle.\n\n## Result\nThe circuit divides the clock by 2: the oscillating nodes run at \\(f_{CK}/2\\). It relies on complementary, non-overlapping switch conduction and on the clock being fast enough that stored charge is not lost between phases. If both switches conducted at once, the odd loop would be closed and the inverters would fight; proper complementary clocking avoids that.",
        "format": "markdown",
        "sha256": "32f160487ede6872606176ba5004469770f74ce7cbf1cfd4aec247e86bb018e6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic, clocked divider by two and explains its switched-node charge storage. The golden solution makes detailed internal-path analysis optional.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2353,
        "output_tokens": 4208,
        "total_tokens": 6561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3843,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2353,
        "output_tokens": 4208,
        "total_tokens": 6561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3843,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter continuously drives the output node of Inv 1 with the complement of the loop node. This parallels Inv 1 (extra drive) only while the CK switch is on, but otherwise produces contention. When the complementary switch is on it also closes a 3-inverter ring, so the loop oscillates instead of holding a stable state.\n\nThe net result is spurious high-frequency switching, crowbar current and loss of the intended phased/dynamic behavior, which raises power and destroys correct operation.\n\nFinal answer: degrades perf. (contention/oscillation/power)",
        "format": "markdown",
        "sha256": "e63350d1e0ee5fd02b35279eb7c05d5feaff757e239695c470f7e7a9509ec85a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes contention and the three-inversion loop, but overstates this as continuous destructive oscillation and misses the key tradeoff: the feedforward path improves high-speed operation while raising the minimum usable clock frequency at low rates.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2244,
        "output_tokens": 14123,
        "total_tokens": 16367,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14006,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2244,
        "output_tokens": 14123,
        "total_tokens": 16367,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14006,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter DC-connects the feedback node to the intermediate node (bypassing both the CK switch and Inv 1). Whenever the \\(\\overline{\\rm CK}\\) switch is closed this produces a 3-inversion loop, so the circuit oscillates. The red inverter’s own delay therefore sets the oscillation frequency, while the continuous switching (plus contention with the floating Inv 1) raises power and destroys stable logic levels.\n\nFinal answer: enables oscillation (raises power, sets freq.)",
        "format": "markdown",
        "sha256": "d3b04c99cae88a26adfabb98d8653359c8528feb6ec5f0a8d48395c18da9395a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recognizes the bypass path and the three-inversion loop with contention, but misses the high-speed benefit and the key low-frequency consequence: the unclocked branch raises the minimum usable clock frequency. It also overstates that the circuit simply oscillates whenever the switch is closed.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2244,
        "output_tokens": 13520,
        "total_tokens": 15764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13421,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2244,
        "output_tokens": 13520,
        "total_tokens": 15764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13421,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter continuously drives the intermediate node (output of Inv 1) to the complement of the left-hand feedback node. Because the two switches are controlled by complementary clocks, this produces two harmful effects:\n\n- In the phase when the CK switch is open, Inv 1’s input floats while its output remains tied to the red inverter, producing prolonged contention.\n- In the phase when the \\(\\overline{\\rm CK}\\) switch is closed, the red inverter closes an odd-inversion loop, so the circuit enters a high-frequency oscillatory (or metastable) regime instead of holding or propagating a stable value.\n\nBoth effects raise short-circuit and dynamic power and destroy reliable clocked operation, degrading performance.\n\nFinal answer: degrades perf. (contention+uncontrolled oscillation)",
        "format": "markdown",
        "sha256": "3f9cfca50196c5b0203bc45a300232f61bf87ad58a6cca6e1ba6c2cb010252f0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the red inverter’s contention and odd-inversion loop, which are relevant mechanisms. However, it misses the feedforward bypass that speeds the divider at high clock rates and incorrectly treats oscillation as a high-frequency failure; the key drawback occurs at low clock rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2244,
        "output_tokens": 16259,
        "total_tokens": 18503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16102,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2244,
        "output_tokens": 16259,
        "total_tokens": 18503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16102,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No, I do not agree with the given answer.\n\nThe red inverter’s input is tied to the leftmost (feedback) node and its output is tied directly to the output node of Inv1. That is a feed-through / bypass connection around the CK switch + Inv1, not a cross-coupled feedback connection around Inv1. (A keeper would take its input from Inv1’s output and drive Inv1’s input.)\n\nConsequently the red device neither forms a latch with Inv1 nor supplies the small restorative current that would hold a floating dynamic node. Floating nodes remain in both clock phases, so a minimum clock frequency set by leakage is still present.\n\nIts actual effect is simply to insert a permanent, unclocked inverting path between those two nodes (creating a sneak path and, whenever the CK switch is open, possible contention with Inv1).",
        "format": "markdown",
        "sha256": "5f559a8b7760a0f92d603a0e2c91794ca514513e76a91b5c6d4f5d5de65cc15f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter as a feedforward bypass. However, it misses the key tradeoff: the branch can speed high-rate operation but overpower the latch and raise the minimum usable clock rate at low rates. It instead attributes the minimum-frequency limit to leakage.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2289,
        "output_tokens": 52042,
        "total_tokens": 54331,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 51868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2289,
        "output_tokens": 52042,
        "total_tokens": 54331,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 51868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The red inverter is not a keeper and does not form a cross-coupled latch with Inv1, so it does not remove the leakage-imposed minimum clock frequency.\n\nTrace the red wires. Its input is tied to the node *before* the CK switch — the feedback node driven by the rightmost inverter — and its output is tied to the node *after* Inv1, the same node Inv1 already drives. A cross-coupled keeper around Inv1 would have to feed back from Inv1’s output to Inv1’s *input*, the dynamic node between the CK switch and Inv1, so the pair regenerates while that node floats. This connection does not do that.\n\nBoth ends of the red inverter land on inverter outputs, which are always actively driven. The nodes that actually float are Inv1’s input when CK is open and the next inverter’s input when CKbar is open. The red device replenishes neither, so leakage still sets a minimum clock frequency.\n\nWhat it does instead:\n\n- With CK closed, the switch forces Inv1’s input to equal the feedback node, so the red inverter and Inv1 drive the same value. It is only a redundant parallel path around the CK switch plus Inv1.\n- With CKbar closed, the two right-hand inverters force the feedback node to equal Inv1’s output, while the red inverter forces that output to be the opposite of the feedback node. That is N = ~N: no stable logic state, just contention, and the three-inversion loop can oscillate.\n\nSo the highlighted inverter is a miswired bypass, not a staticizer. A real keeper would be a weak inverter from each storage inverter’s output back to its own input, on the storage side of the switch.",
        "format": "markdown",
        "sha256": "f26f8b8bdf49624f96ee75427b39cab453b7ffc9da58f6aeca5b052bc8361a5e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the bypass and possible three-inversion loop. But it calls the branch redundant/miswired and misses its high-speed benefit and the key low-frequency effect: it can overpower the latch and raise the minimum usable clock rate.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2289,
        "output_tokens": 20152,
        "total_tokens": 22441,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19789,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2289,
        "output_tokens": 20152,
        "total_tokens": 22441,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19789,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The red inverter is not cross-coupled with `Inv1`, so it is not a keeper and it does nothing about leakage or minimum clock frequency.\n\nTrace its terminals: the bubble (output) lands on the node *after* `Inv1` — the same node `Inv1` already drives, just before the `CK`-bar switch — and its input comes from the fed-back wire *before* the `CK` switch. A keeper would have to take its input from `Inv1`'s output and drive `Inv1`'s input. This device does neither, so the two never form a latch.\n\nWhat it actually does is bypass the `CK` switch and `Inv1`, continuously driving the post-`Inv1` node with the inverse of the fed-back signal. The return path through the two right-hand inverters is non-inverting, so adding this inversion gives a 3-inversion loop that is closed whenever the `CK`-bar switch conducts. The red inverter is therefore the feedback element that turns the chain into a ring oscillator gated on during `CK` = 0, not a static hold device.",
        "format": "markdown",
        "sha256": "06f126928f761cc29281f593f517d404a281a2a73785b033ad8bf16ee69b5c48"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly rejects the keeper interpretation and identifies the bypass path and three-inversion loop. But it says the branch does nothing about minimum clock frequency and omits the key tradeoff: it can help at high rates, while at low rates it can overpower the latch behavior and raise the minimum usable rate.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2289,
        "output_tokens": 24911,
        "total_tokens": 27200,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24675,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2289,
        "output_tokens": 24911,
        "total_tokens": 27200,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24675,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a CMOS inverter (\\(M_1\\)-\\(M_2\\)) placed in a shunt-shunt feedback loop by \\(R_F\\). Its input resistance is exactly\n\\[\nR_\\text{in}=\\frac{R_F+(r_{o1}\\parallel r_{o2})}{1+(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2})}.\n\\]\nEnforcing the constraint \\(R_\\text{in}=50\\,\\Omega\\) therefore fixes the feedback resistor once the small-signal parameters of the inverter are chosen:\n\\[\nR_F=50\\bigl[1+(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2})\\bigr]-(r_{o1}\\parallel r_{o2}).\n\\]\n\nA complete noise analysis (channel noise of both MOSFETs plus thermal noise of \\(R_F\\)) shows that every noise contribution, when referred to the output and normalized to the noise of the \\(50\\,\\Omega\\) source, is a monotonically decreasing function of \\(G_m=g_{m1}+g_{m2}\\). Consequently the noise factor itself falls steadily as the transistors are widened (or their bias current is raised) and \\(R_F\\) is updated according to the expression above. In the limit of large \\(G_m\\) the noise factor approaches a floor set only by the intrinsic gain of the inverter; that floor can be made arbitrarily close to \\(0\\,\\text{dB}\\) when capacitive parasitics are neglected.\n\nHence the circuit is optimized for noise figure, subject to the matching constraint, by maximizing \\(g_{m1}+g_{m2}\\) (within the limits imposed by power, area and bandwidth) and setting \\(R_F\\) to the unique value that keeps \\(R_\\text{in}=50\\,\\Omega\\).\n\nFinal answer: maximize \\(G_m\\) (set \\(R_F\\) to keep \\(R_{in}=50\\Omega\\))",
        "format": "markdown",
        "sha256": "b4ee2b3772e36e9755f304ffa7148987ffa8743654815dbc8119f985881a626d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It uses the finite-output-resistance input-match relation and correctly recommends increasing total transconductance while adjusting RF to hold Rin at 50 Ω, allowing NF to fall below 1 + γ. Its additional asymptotic description is consistent with the stated trend.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3335,
        "output_tokens": 45582,
        "total_tokens": 48917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 45160,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3335,
        "output_tokens": 45582,
        "total_tokens": 48917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 45160,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a self-biased CMOS inverter with shunt-shunt resistive feedback. Its input resistance is exactly\n\\[\nR_\\text{in}=\\frac{1+R_F/r_o}{G_m+1/r_o},\n\\]\nwhere \\(G_m=g_{m1}+g_{m2}\\) and \\(r_o=r_{o1}\\parallel r_{o2}\\).\n\nEnforcing the constraint \\(R_\\text{in}=50\\,\\Omega\\) therefore fixes a definite relationship among \\(G_m\\), \\(r_o\\) and \\(R_F\\). Substituting that relationship into the noise-factor expression shows that \\(F\\) is monotonically reduced by\n- raising the intrinsic gain \\(G_m r_o\\) (longer channels or lower over-drive), and\n- raising \\(G_m\\) itself (wider devices / higher bias current),\n\nwhile \\(R_F\\) is re-adjusted at each step so that the input-resistance constraint remains satisfied. (Bandwidth, power and linearity limits ultimately bound how far these two quantities can be pushed.)\n\nFinal answer: \\(max.\\,G_m r_o\\) & \\(G_m\\) (adj. \\(R_F\\) s.t. \\(R_{in}=50\\Omega\\))",
        "format": "markdown",
        "sha256": "7733ecdf40abe606eddd480559054257d1858ab0252e668963f2aca2c1e60593"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The input-resistance expression is equivalent to the finite-output-resistance relation, and the answer correctly recommends increasing both gm and intrinsic gain while readjusting RF to maintain the 50-ohm match. This captures the NF optimization.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3335,
        "output_tokens": 35657,
        "total_tokens": 38992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35382,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3335,
        "output_tokens": 35657,
        "total_tokens": 38992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35382,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a CMOS inverter with resistive shunt feedback. With the MOSFET output resistance neglected, its input resistance is exactly\n\\[\nR_\\text{in}=\\frac1{g_m},\\qquad g_m=g_{m1}+g_{m2}.\n\\]\nEnforcing \\(R_\\text{in}=50\\,\\Omega\\) therefore fixes the transconductance at \\(g_m=20\\,\\text{mS}\\).\n\nUnder the same conditions the noise factor seen by a \\(50\\,\\Omega\\) source reduces to\n\\[\nF=1+\\frac{\\gamma(1+g_m R_F)^2+4 g_m R_F}{(g_m R_F-1)^2}.\n\\]\nThe expression is monotonically decreasing in the feedback resistance and approaches the lower bound \\(1+\\gamma\\) for \\(R_F\\to\\infty\\). Consequently the noise figure is optimized by making \\(R_F\\) as large as other specifications (bandwidth, voltage headroom, etc.) permit.\n\nFinal answer: \\(max\\,R_F\\) (with \\(g_m=20\\,\\text{mS}\\))",
        "format": "markdown",
        "sha256": "65c67ca5cfd914253499b413cd840358f3b76d71cf4f2dc61e7fddf0a38cf6a5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the shunt-feedback inverter, but assumes away finite output resistance, fixes gm at 1/Rs, and concludes NF cannot improve below 1+γ. This misses the key result that finite ro permits gm above 1/Rs with RF adjusted to maintain the match, lowering NF.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3335,
        "output_tokens": 26534,
        "total_tokens": 29869,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3335,
        "output_tokens": 26534,
        "total_tokens": 29869,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a shunt-shunt feedback transimpedance amplifier. With channel-length modulation and body effect neglected, the small-signal voltage gain of the first stage and the short-circuit output current of the PMOS differential pair together produce the equivalent transconductance\n\\[\nG_m=g_{m1}R_{D1}\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\n\\]\nfrom the input node to the output node.\n\nKCL at the output node (including the loading of \\(R_F\\)) and KCL at the input node then yield the driving-point impedance seen by \\(I_\\mathrm{in}\\):\n\\[\nZ_\\mathrm{in}(s)=\\Biggl(\\frac{1}{R_\\mathrm{in}}+sC_\\mathrm{in}+\\frac{1+G_mR_{D2}}{R_F+R_{D2}}\\Biggr)^{-1}.\n\\]\n\nFinal answer: \\(Z_{in}(s)=\\left(1/R_{in}+sC_{in}+(1+g_{m1}R_{D1}\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}R_{D2})/(R_F+R_{D2})\\right)^{-1}\\)",
        "format": "markdown",
        "sha256": "82caec4ff457ce9f4ebc165d97a6978169fe9691cd449505598a68025b038b5a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The feedback-admittance term includes the output resistance and reduces to the golden result, with the matched-device assumption, when A0 = Gm RD2. However, the added, unexplained 1/Rin and sCin terms make the stated impedance differ from the requested simplified-model input resistance.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1453,
        "output_tokens": 16897,
        "total_tokens": 18350,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16611,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1453,
        "output_tokens": 16897,
        "total_tokens": 18350,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16611,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a shunt-shunt feedback transimpedance amplifier. The small-signal input impedance is found from KCL after relating \\(V_\\text{out}\\) to the voltage \\(V_P\\) at the input node (device output resistances, body effect and all device capacitances are neglected).\n\nThe common-source stage produces\n\\[\nV_X=-g_{m1}R_{D1}V_P.\n\\]\nWith the tail current of the PMOS pair held constant, the signal current delivered to the output node is\n\\[\ni_{D3}=-g_{m1}R_{D1}\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}V_P.\n\\]\nKCL at the output node, taking the loading of both \\(R_{D2}\\) and \\(R_F\\) into account, then yields the current drawn from the input node through the feedback resistor:\n\\[\n\\frac{V_P-V_\\text{out}}{R_F}=\\frac{1+g_{m1}R_{D1}R_{D2}\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}}{R_F+R_{D2}}V_P.\n\\]\nAdding the currents through \\(R_\\text{in}\\) and \\(C_\\text{in}\\) produces the input admittance. Inversion finally gives\n\\[\nZ_\\text{in}(s)=\\left(\\frac{1}{R_\\text{in}}+sC_\\text{in}+\\frac{1+g_{m1}R_{D1}\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}R_{D2}}{R_F+R_{D2}}\\right)^{-1}.\n\\]\n\nFinal answer: \\(Z_{in}(s)=\\left(1/R_{in}+s C_{in}+\\dfrac{1+g_{m1}R_{D1}(g_{m2}g_{m3}/(g_{m2}+g_{m3}))R_{D2}}{R_F+R_{D2}}\\right)^{-1}\\)",
        "format": "markdown",
        "sha256": "3966afea8d481dbb36630580df4e8956ef1448aef6e43ffdde275709a69b5c77"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The feedback-path admittance is correct: it includes the exact \n\\((1+A_0)/(R_F+R_{D2})\\)\n term, and the differential-pair transconductance is equivalent to the golden solution's half-factor for a matched pair. But the final expression adds unspecified shunt \\(R_{in}\\) and \\(C_{in}\\) terms, so it does not give the golden model's input resistance directly.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1453,
        "output_tokens": 19999,
        "total_tokens": 21452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19524,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1453,
        "output_tokens": 19999,
        "total_tokens": 21452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19524,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a shunt-feedback transimpedance amplifier. The input node is loaded by \\(R_\\text{in}\\) and \\(C_\\text{in}\\) and is also connected to the output node through the feedback resistor \\(R_F\\). Transistor \\(M_1\\) is a common-source stage whose drain drives one gate of the PMOS differential pair \\(M_2\\)-\\(M_3\\). The opposite drain of the differential pair is grounded while the output is taken from the remaining drain (loaded by \\(R_{D2}\\)).\n\nChannel-length modulation and body effect are neglected. Small-signal analysis of the two stages then shows that a voltage \\(v_P\\) at the input produces a current\n\\[\n-G_m v_P,\\qquad\nG_m=g_{m1}R_{D1}\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\n\\]\ninjected into the output node. Writing KCL at both the input and output nodes and eliminating the output voltage yields the driving-point admittance seen by \\(I_\\text{in}\\):\n\\[\nY_\\text{in}(s)=sC_\\text{in}+\\frac{1}{R_\\text{in}}+\\frac{1+G_m R_{D2}}{R_F+R_{D2}}.\n\\]\nThe input impedance is therefore\n\\[\nZ_\\text{in}(s)=\\Biggl(sC_\\text{in}+\\frac{1}{R_\\text{in}}+\\frac{1+g_{m1}R_{D1}\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}R_{D2}}{R_F+R_{D2}}\\Biggr)^{-1}.\n\\]\n\nFinal answer: \\(Z_{in}(s)=\\left(sC_{in}+1/R_{in}+\\dfrac{1+g_{m1}R_{D1}\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}R_{D2}}{R_F+R_{D2}}\\right)^{-1}\\)",
        "format": "markdown",
        "sha256": "c2aa96bc25fbb97258809d14fef8fded7781a4118ce649bf9e25a1dbc616d490"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The feedback contribution is correct: \u0000the term \u0000(1+G_mR_{D2})/(R_F+R_{D2}) is equivalent to the golden result with A0 = G_mR_D2. However, the answer adds shunt R_in and C_in terms absent from the specified simplified model, so its final impedance is not the requested result directly.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1453,
        "output_tokens": 33174,
        "total_tokens": 34627,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32703,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1453,
        "output_tokens": 33174,
        "total_tokens": 34627,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32703,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO thermal noise appears directly as a voltage disturbance on \\(V_\\text{out}\\). Because the tank inductors force the common-mode level of the oscillation nodes to equal \\(V_\\text{out}\\), this disturbance changes the bias voltage that appears across the varactors by exactly the same amount. Consequently the oscillation frequency is modulated with a sensitivity equal to the supply-pushing factor\n\\[\nK_\\text{push}=\\frac{\\partial f_\\text{osc}}{\\partial V_\\text{out}}\n\\]\n(identical in magnitude to the ordinary tuning gain \\(K_\\text{VCO}\\) when the only voltage-dependent capacitances are the varactors).\n\nA voltage-noise spectrum \\(S_\\text{th}(\\Delta f)\\) therefore produces a frequency-noise spectrum \\(K_\\text{push}^2S_\\text{th}(\\Delta f)\\). Integration of frequency into phase yields the one-sided phase spectral density \\(S_\\theta(\\Delta f)=K_\\text{push}^2S_\\text{th}(\\Delta f)/(\\Delta f)^2\\). The corresponding single-sideband phase noise is\n\\[\n\\mathcal{L}(\\Delta f)=10\\log_{10}\\Biggl(\\frac{K_\\text{push}^2S_\\text{th}(\\Delta f)}{2(\\Delta f)^2}\\Biggr).\n\\]\n(The same result is obtained by a full periodic-noise simulation once the LDO noise source has been annotated with spectrum \\(S_\\text{th}\\); the analytic expression above simply makes the dominant conversion mechanism explicit.)\n\nFinal answer: \\(\\mathcal{L}(\\Delta f)=10\\log_{10}[K_\\text{push}^{2}S_\\text{th}(\\Delta f)/(2(\\Delta f)^{2})]\\)",
        "format": "markdown",
        "sha256": "f94fa28602a64f88014babcb399407f582cf707abf45b957f65d12a4e0209f9b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing through the varactors, converts LDO voltage noise to frequency noise using Kpush, and applies the 1/Δf² FM-to-phase-noise relation. It also captures the relationship between Kpush and KVCO; minor spectral-convention details are immaterial.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3714,
        "output_tokens": 9194,
        "total_tokens": 12908,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8818,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3714,
        "output_tokens": 9194,
        "total_tokens": 12908,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8818,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO thermal noise appears directly as a voltage disturbance on the VCO supply node \\(V_\\text{out}\\). Denote the PSD of this disturbance by \\(S_\\text{th}(f)\\) (V\\(^2\\)/Hz).\n\nBecause the tank common-mode level sits at \\(V_\\text{out}\\), the same disturbance modulates every voltage-dependent capacitance in the tank (most importantly the varactors, but also the bias-dependent device capacitances of \\(M_1\\)-\\(M_2\\)). The net result is a fluctuation of the oscillation frequency whose sensitivity is the supply pushing factor\n\\[\nK_\\text{push}=\\frac{\\partial f_\\text{osc}}{\\partial V_\\text{out}}\n\\]\n(Hz/V). (When varactor modulation dominates, \\(|K_\\text{push}|\\approx K_\\text{VCO}\\), but the equality is not required for the derivation.)\n\nFrequency noise is therefore related to supply noise by\n\\[\nS_{\\Delta f}(f)=K_\\text{push}^2\\,S_\\text{th}(f).\n\\]\nPhase is the integral of excess frequency, which multiplies the PSD by \\(1/f^2\\):\n\\[\nS_\\phi(f)=\\frac{K_\\text{push}^2\\,S_\\text{th}(f)}{f^2}.\n\\]\nThe single-sideband phase-noise spectrum that is normally quoted for the VCO output then follows at once:\n\\[\n\\mathcal{L}(\\Delta f)=10\\log_{10}\\Biggl(\\frac{K_\\text{push}^2\\,S_\\text{th}(\\Delta f)}{2(\\Delta f)^2}\\Biggr)\n\\quad\\text{(dBc/Hz)}.\n\\]\n(The quasi-static pushing model used above is accurate for all offset frequencies of practical interest, because an LDO’s output noise is band-limited to well below the carrier.)\n\nFinal answer: \\(\\mathcal{L}(\\Delta f)=10\\log_{10}[K_{push}^{2}S_{th}(\\Delta f)/(2(\\Delta f)^{2})]\\)",
        "format": "markdown",
        "sha256": "b27fde6401f3304e000361690e14f7d2cc2c65c7b964c384edbfcd218333dc9e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly uses supply-pushing sensitivity to convert LDO voltage noise to frequency noise, then applies the 1/Δf² FM-to-phase-noise conversion. It also identifies the direct varactor coupling and relates Kpush to KVCO; the formula shows how reducing that sensitivity reduces noise conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3714,
        "output_tokens": 7059,
        "total_tokens": 10773,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6606,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3714,
        "output_tokens": 7059,
        "total_tokens": 10773,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6606,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO output noise voltage (with one-sided spectrum \\(S_\\mathrm{th}\\)) reaches the oscillator exclusively as a supply disturbance. Because the tank bias point (and therefore the effective capacitance of \\(M_{v1,2}\\) and of the device parasitics) depends on \\(V_\\mathrm{out}\\), this disturbance modulates the oscillation frequency.  \n\nWith the supply-pushing factor defined by\n\\[\nK_{VDD}\\equiv\\frac{\\partial\\omega_0}{\\partial V_\\mathrm{out}},\n\\]\nthe resulting one-sided spectrum of phase fluctuations is\n\\[\nS_\\phi(\\Delta\\omega)=\\Bigl(\\frac{K_{VDD}}{\\Delta\\omega}\\Bigr)^2S_\\mathrm{th}(\\Delta\\omega).\n\\]\nThe single-sideband phase noise reported for the VCO is therefore\n\\[\n\\mathcal{L}(\\Delta\\omega)=\\frac12\\Bigl(\\frac{K_{VDD}}{\\Delta\\omega}\\Bigr)^2S_\\mathrm{th}(\\Delta\\omega).\n\\]\n(The same relation is obtained from a narrow-band FM analysis or from the low-frequency limit of the impulse-sensitivity function associated with a noise source placed at the LDO output.)  \n\n\\(K_{VDD}\\) itself is obtained by a simple differential measurement (or a small-signal sensitivity analysis) of oscillation frequency versus supply; once it is known, the expression above converts \\(S_\\mathrm{th}\\) directly into VCO phase noise.\n\nFinal answer: \\(\\mathcal{L}(\\Delta\\omega)=\\frac12(K_{VDD}/\\Delta\\omega)^2 S_{th}\\)",
        "format": "markdown",
        "sha256": "49608ba1d9333d86332b4d1acde32e21f844628b26da2ce5a77ffbbde10ecf16"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing and converts the LDO noise to phase noise with the expected inverse-square offset dependence; the factor-of-two convention is acceptable. It omits the circuit-specific insight that the supply acts directly on the varactors, linking Kpush to KVCO and making reduced KVCO a design remedy.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3714,
        "output_tokens": 8089,
        "total_tokens": 11803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3714,
        "output_tokens": 8089,
        "total_tokens": 11803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The added tail capacitor \\(C_T\\) places a low impedance at the common-source node for frequencies near \\(2f_0\\). Consequently \\(M_1\\) and \\(M_2\\) are driven deeper into triode for a larger fraction of each cycle and resistively load the tank, lowering its \\(Q\\). The degraded tank \\(Q\\) raises the oscillator phase noise.\n\nFinal answer: increases (Q degradation)",
        "format": "markdown",
        "sha256": "4baaddac28a1aa590a6cd4bc45e4d2eae49436cbe65a4081aaeab61818e5d817"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies triode operation and loading as a possible degradation mechanism, but incorrectly presents phase noise as monotonically increasing and misses the class-C improvement and overall nonmonotonic dependence on CT.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3687,
        "output_tokens": 5748,
        "total_tokens": 9435,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5661,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3687,
        "output_tokens": 5748,
        "total_tokens": 9435,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5661,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The addition of \\(C_T\\) has two opposing effects, so the net change in phase noise depends on its value (and on the oscillation amplitude).\n\n- Noise of \\(I_{SS}\\) near \\(2f_0\\) is mixed into phase noise around the carrier. A moderate \\(C_T\\) shunts that noise to ground and therefore lowers phase noise.\n- Once \\(C_T\\) is large enough to hold the common-source node at AC ground, \\(M_1/M_2\\) enter triode for a greater fraction of each cycle. Their triode resistance then loads the tank, the loaded \\(Q\\) falls, and phase noise rises.\n\nConsequently an optimum \\(C_T\\) exists; a capacitor that is either too small or too large leaves the phase noise higher than this optimum. (The classic remedy that obtains both noise filtering and a high impedance at \\(2f_0\\) is a series inductor between the common-source node and the parallel combination of \\(I_{SS}\\) and \\(C_T\\).)\n\nFinal answer: optimum \\(C_T\\) lowers PN (too large raises it)",
        "format": "markdown",
        "sha256": "8ed0e202e455a2fe170d027be267d9b16b47f3a6ad492f31c3442a9b49525195"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies a non-monotonic effect and gives a relevant triode-loading degradation. However, it attributes the improvement to shunting ISS noise rather than Razavi’s class-C-like operation with peak tank currents above ISS, and it omits the flicker-noise upconversion or large-CT instability mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3687,
        "output_tokens": 8047,
        "total_tokens": 11734,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7816,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3687,
        "output_tokens": 8047,
        "total_tokens": 11734,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7816,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a cross-coupled NMOS LC oscillator. Noise from the tail current source \\(I_{SS}\\) (particularly its components near \\(2f_0\\)) is mixed down to the carrier and appears as phase noise.\n\n\\(C_T\\) placed at the common-source node shunts those high-frequency noise components to ground before they can reach the switching pair, suppressing this contribution.\n\n(The same capacitor also lowers the impedance seen at \\(2f_0\\), which can push \\(M_1/M_2\\) deeper into triode and thereby degrade tank \\(Q\\). For any practical, optimized value of \\(C_T\\) the filtering benefit dominates.)\n\nFinal answer: phase noise decreases",
        "format": "markdown",
        "sha256": "74646b8e1be16c2fa6efeebbeae31bec09f821dfedf04764dd4fc08049d13cf8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that adding CT decreases phase noise because it filters tail-source noise, treating that benefit as dominant. This misses the essential nonmonotonic behavior and the class-C improvement/degradation tradeoff; the triode caveat does not correct the monotonic conclusion.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3687,
        "output_tokens": 11359,
        "total_tokens": 15046,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 3687,
        "output_tokens": 11359,
        "total_tokens": 15046,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The provided schematic lacks numerical values (and explicit capacitors). A specific numerical estimate is therefore impossible.\n\nThe startup behavior of the ideal circuit is governed by complex poles whose imaginary part is set by the inductor and the ratio of cross-coupled to coupling transconductances, but that quantity cannot be evaluated from the information shown, nor does it directly give the steady-state frequency once device nonlinearity and triode-region loss are taken into account.\n\nFinal answer: cannot be determined",
        "format": "markdown",
        "sha256": "51e4150c49ffed3ef2338e8f181eddf51ee881b169f25c6338be3c023ec7ce70"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "A numerical value may be unavailable, but the question calls for a symbolic estimate. The answer omits the tank resonance and coupling-induced frequency shift; its vague reference to poles and transconductances is only limited relevant understanding.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2778,
        "output_tokens": 26087,
        "total_tokens": 28865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25994,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2778,
        "output_tokens": 26087,
        "total_tokens": 28865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25994,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a pair of coupled cross-coupled stages with inductive loads (and coupling devices biased by the \\(I_1\\) sources). No inductance values, bias-current values, device sizes, or capacitances appear anywhere in the schematic.\n\nA numerical frequency (or even a concrete order-of-magnitude estimate) is therefore impossible to obtain: every candidate expression, whether of the form \\(1/(2\\pi\\sqrt{LC})\\) or of the form \\(g_m/L\\), contains at least one unknown parameter.",
        "format": "markdown",
        "sha256": "4f6e7e01c24192e51bc801f74c870e11075d0cd306edecf1e98cff782978c834"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It notes the LC resonance form and correctly observes that a numerical value needs component data, but it does not give the symbolic estimate or the essential coupling-induced frequency shift.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2778,
        "output_tokens": 26790,
        "total_tokens": 29568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26683,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2778,
        "output_tokens": 26790,
        "total_tokens": 29568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26683,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "x-ai/grok-4.7",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The schematic shows two identical cores coupled through additional differential pairs. Each core contains a cross-coupled pair (providing negative conductance) together with inductive loads and is the classic topology of a quadrature LC oscillator.\n\nA definite oscillation frequency exists only when the tank capacitances (explicit or parasitic) and the inductance values are known, because\n\\[\nf_\\text{osc}\\approx\\frac{1}{2\\pi\\sqrt{LC}}\n\\]\n(with a small, coupling-dependent shift set by the ratio \\(I_1/I_{SS}\\)). No capacitors appear in the figure, the inductors are unlabeled, and no device sizes or over-drive voltages are given from which the transconductances could be calculated. Consequently no numerical value, nor even a concrete symbolic expression, can be obtained.\n\nFinal answer: cannot be determined",
        "format": "markdown",
        "sha256": "89c47f9d7d5f35ab0f00ac22098a3b9b296365428b8ea1a7df28e38401786b41"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Recognizes the LC tank resonance and mentions an I1/ISS-dependent coupling shift, but gives no shift estimate of the required form and incorrectly concludes that no symbolic estimate is possible.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2778,
        "output_tokens": 40155,
        "total_tokens": 42933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39988,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 2778,
        "output_tokens": 40155,
        "total_tokens": 42933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39988,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
