{
  "model_key": "hy4",
  "display_name": "Hy4",
  "provider": "tencent",
  "evaluation_model_ids": [],
  "thinking_effort": "high",
  "configuration_note": "Hy4 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (tencent/hy4) at reasoning effort high, the highest it offers. Requests set max_tokens to 65,536, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Hy4 on 2026-11-10 ($0.417 input, $0.021 cached input, $1.2505 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 123,
          "incorrect_count": 27,
          "partial_credit_count": 23,
          "zero_count": 4,
          "mean_score_0_to_4": 3.6133333333333333,
          "score_percent": 90.33333333333333,
          "score_distribution": {
            "0": 4,
            "1": 4,
            "2": 11,
            "3": 8,
            "4": 123
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 123,
          "incorrect_count": 27,
          "partial_credit_count": 23,
          "zero_count": 4,
          "mean_score_0_to_4": 3.6133333333333333,
          "score_percent": 90.33333333333333,
          "score_distribution": {
            "0": 4,
            "1": 4,
            "2": 11,
            "3": 8,
            "4": 123
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 84,
          "incorrect_count": 6,
          "partial_credit_count": 2,
          "zero_count": 4,
          "mean_score_0_to_4": 3.7777777777777777,
          "score_percent": 94.44444444444444,
          "score_distribution": {
            "0": 4,
            "1": 1,
            "3": 1,
            "4": 84
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 84,
          "incorrect_count": 6,
          "partial_credit_count": 2,
          "zero_count": 4,
          "mean_score_0_to_4": 3.7777777777777777,
          "score_percent": 94.44444444444444,
          "score_distribution": {
            "0": 4,
            "1": 1,
            "3": 1,
            "4": 84
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 39,
          "incorrect_count": 21,
          "partial_credit_count": 21,
          "zero_count": 0,
          "mean_score_0_to_4": 3.3666666666666667,
          "score_percent": 84.16666666666667,
          "score_distribution": {
            "1": 3,
            "2": 11,
            "3": 7,
            "4": 39
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 39,
          "incorrect_count": 21,
          "partial_credit_count": 21,
          "zero_count": 0,
          "mean_score_0_to_4": 3.3666666666666667,
          "score_percent": 84.16666666666667,
          "score_distribution": {
            "1": 3,
            "2": 11,
            "3": 7,
            "4": 39
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 40,
        "incorrect_count": 10,
        "partial_credit_count": 8,
        "zero_count": 2,
        "mean_score_0_to_4": 3.52,
        "score_percent": 88.0,
        "score_distribution": {
          "0": 2,
          "1": 2,
          "2": 4,
          "3": 2,
          "4": 40
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 42,
        "incorrect_count": 8,
        "partial_credit_count": 6,
        "zero_count": 2,
        "mean_score_0_to_4": 3.66,
        "score_percent": 91.5,
        "score_distribution": {
          "0": 2,
          "1": 1,
          "2": 1,
          "3": 4,
          "4": 42
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 41,
        "incorrect_count": 9,
        "partial_credit_count": 9,
        "zero_count": 0,
        "mean_score_0_to_4": 3.66,
        "score_percent": 91.5,
        "score_distribution": {
          "1": 1,
          "2": 6,
          "3": 2,
          "4": 41
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 144512,
        "input_tokens": 231510,
        "output_tokens": 3784391,
        "total_tokens": 4015901
      },
      "known_totals": {
        "cached_input_tokens": 144512,
        "input_tokens": 231510,
        "output_tokens": 3784391,
        "total_tokens": 4015901
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 27,
          "incorrect_count": 3,
          "partial_credit_count": 1,
          "zero_count": 2,
          "mean_score_0_to_4": 3.6333333333333333,
          "score_percent": 90.83333333333333,
          "score_distribution": {
            "0": 2,
            "1": 1,
            "4": 27
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 28,
          "incorrect_count": 2,
          "partial_credit_count": 0,
          "zero_count": 2,
          "mean_score_0_to_4": 3.7333333333333334,
          "score_percent": 93.33333333333333,
          "score_distribution": {
            "0": 2,
            "4": 28
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 29,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.966666666666667,
          "score_percent": 99.16666666666667,
          "score_distribution": {
            "3": 1,
            "4": 29
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 13,
          "incorrect_count": 7,
          "partial_credit_count": 7,
          "zero_count": 0,
          "mean_score_0_to_4": 3.35,
          "score_percent": 83.75,
          "score_distribution": {
            "1": 1,
            "2": 4,
            "3": 2,
            "4": 13
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 14,
          "incorrect_count": 6,
          "partial_credit_count": 6,
          "zero_count": 0,
          "mean_score_0_to_4": 3.55,
          "score_percent": 88.75,
          "score_distribution": {
            "1": 1,
            "2": 1,
            "3": 4,
            "4": 14
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 12,
          "incorrect_count": 8,
          "partial_credit_count": 8,
          "zero_count": 0,
          "mean_score_0_to_4": 3.2,
          "score_percent": 80.0,
          "score_distribution": {
            "1": 1,
            "2": 6,
            "3": 1,
            "4": 12
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Under the usual long-channel/saturation assumptions and **same bias/overdrive**, the intrinsic gain\n\n\\[\nA_0 = g_m r_o \\approx \\frac{g_m}{I_D} V_A\n\\]\n\nroughly **doubles**.\n\nWhy:\n\n- Doubling both \\(W\\) and \\(L\\) keeps \\(W/L\\) unchanged, so \\(g_m\\) and \\(g_m/I_D\\) stay about the same.\n- The Early voltage \\(V_A\\) is roughly proportional to \\(L\\) \\((V_A \\approx V_A' L)\\), or equivalently \\(\\lambda \\propto 1/L\\).\n- Doubling \\(L\\) halves \\(\\lambda\\), so \\(r_o \\approx 1/(\\lambda I_D)\\) roughly doubles.\n\nThus:\n\n\\[\nA_0' \\approx 2 A_0\n\\]\n\nSo the intrinsic gain increases by about \\(2\\times\\), or about \\(+6\\,\\text{dB}\\).\n\nCaveat: if the drain current/current density is also scaled differently, or if a model assumes \\(\\lambda\\) independent of \\(L\\), the result changes. In general, use \\(A_0=(g_m/I_D)V_A\\): \\(W\\) has little direct effect; longer \\(L\\) mainly increases \\(V_A\\).",
        "format": "markdown",
        "sha256": "9744dd472b8126e7a4f4b2e0b83072d4d336915cfec8fcb33174c423ff751ad9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions leaves W/L, gm, and approximately ID unchanged, while doubling L roughly doubles ro, so intrinsic gain roughly doubles under the stated bias assumptions.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 5726,
        "total_tokens": 5765,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5470,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 5726,
        "total_tokens": 5765,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5470,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the MOSFET stays in saturation and the bias/inversion level is unchanged, its intrinsic gain approximately **doubles**.\n\nIntrinsic gain is\n\n\\[\nA_0 = g_m r_o = \\frac{g_m}{I_D} V_A \\approx \\frac{2}{\\lambda V_{OV}}\n\\]\n\nfor strong inversion, where \\(V_A \\approx 1/\\lambda \\propto L\\).\n\nIf both \\(W\\) and \\(L\\) are doubled:\n\n- \\(W/L\\) is unchanged, so at fixed \\(V_{OV}\\) or fixed \\(I_D\\), \\(g_m/I_D\\) is unchanged.\n- \\(\\lambda \\approx \\lambda_0/L\\), so doubling \\(L\\) halves \\(\\lambda\\), doubling \\(V_A\\) and \\(r_o\\).\n- \\(g_m\\) is roughly unchanged, while \\(r_o\\) roughly doubles.\n\nSo:\n\n\\[\nA_0' \\approx 2A_0\n\\]\n\nCaveat: this assumes a long-channel/CLM-dominated model and fixed bias conditions. If the bias current is also scaled so \\(V_{OV}\\) changes, or in a modern short-channel device with DIBL etc., the result can differ.",
        "format": "markdown",
        "sha256": "215e0e37f8c08fbe5c19f8660af2a15987855c0c2864d618572325de36405fb3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: doubling both dimensions leaves W/L and gm roughly unchanged, while the longer channel reduces channel-length modulation and approximately doubles ro. The stated bias and model caveats are appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 6097,
        "total_tokens": 6136,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 6097,
        "total_tokens": 6136,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming a long-channel MOSFET in saturation with the **same bias current/overdrive**, doubling both **W** and **L** roughly **doubles the intrinsic gain**:\n\n\\[\nA_0 = g_m r_o\n\\]\n\nSince \\(W/L\\) is unchanged:\n\n\\[\nI_D \\propto \\frac{W}{L}V_{OV}^2\n\\]\n\nstays about the same, so \\(g_m \\approx 2I_D/V_{OV}\\) stays about the same.\n\nBut the channel-length modulation parameter scales roughly as\n\n\\[\n\\lambda \\propto \\frac{1}{L}\n\\]\n\nso doubling \\(L\\) halves \\(\\lambda\\). Therefore\n\n\\[\nr_o = \\frac{1}{\\lambda I_D}\n\\]\n\nroughly doubles. Hence:\n\n\\[\ng_m r_o \\rightarrow 2\\, g_m r_o\n\\]\n\nSo the intrinsic gain **approximately doubles**.\n\nCaveat: if you assume \\(\\lambda\\) is a fixed constant independent of \\(L\\), then \\(W/L\\) and \\(I_D\\) are unchanged, so \\(g_m r_o\\) would be unchanged. In real/long-channel modeling, though, the usual result is **gain doubles due to longer \\(L\\)**.",
        "format": "markdown",
        "sha256": "e2dfd7c5394d1e09abd79a836bce3c4067d41ac29c6ef349c0cc94c6e6f4c1c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that constant overdrive and unchanged W/L keep drain current and gm approximately constant, while doubling L approximately halves λ and doubles ro, so intrinsic gain approximately doubles. The bias-condition caveat is appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 3513,
        "total_tokens": 3552,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3271,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 39,
        "output_tokens": 3513,
        "total_tokens": 3552,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3271,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "They can **both** be correct, depending on what is held constant. The question is under-specified.\n\nFor a long-channel MOSFET in saturation,\n\n\\[\nI_D=\\frac12 \\beta V_{OV}^2,\\qquad \\beta=\\mu C_{ox}\\frac WL\n\\]\n\nso\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}=\\beta V_{OV}=\\frac{2I_D}{V_{OV}}.\n\\]\n\nNow the key distinction:\n\n- **Fixed transistor / fixed \\(\\beta\\):**  \n  \\[\n  g_m=\\beta V_{OV}\n  \\]\n  so increasing \\(V_{OV}\\) increases \\(g_m\\) linearly. **Student A is correct.**  \n  But \\(I_D\\) also increases as \\(V_{OV}^2\\).\n\n- **Fixed drain current \\(I_D\\):**  \n  \\[\n  g_m=\\frac{2I_D}{V_{OV}}\n  \\]\n  so increasing \\(V_{OV}\\) means \\(g_m\\) decreases. This is common in analog design when comparing bias points at the same current/power. **Student B is correct.**\n\nSo: **without specifying whether \\(W/L\\) or \\(I_D\\) is fixed, there is no single answer.**  \nIf you simply raise \\(V_{GS}\\) on a given MOSFET in saturation, Student A is right. If you compare designs at the same bias current, Student B is right.",
        "format": "markdown",
        "sha256": "9e928d3c56e4d8480eddb91de80e2c03261ac12b2b28463e65cdf20a2c1d7457"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that for a fixed transistor, increasing overdrive increases gm because the drain current also rises; it also correctly notes that gm falls if drain current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 51,
        "output_tokens": 3249,
        "total_tokens": 3300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2956,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 51,
        "output_tokens": 3249,
        "total_tokens": 3300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2956,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be correct — the question is under-specified.\n\nFor a long-channel MOSFET in saturation,\n\n\\[\nI_D=\\frac12 \\mu C_{ox}\\frac WL V_{OV}^2\n\\]\n\nand\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}\n= \\mu C_{ox}\\frac WL V_{OV}\n= \\frac{2I_D}{V_{OV}}.\n\\]\n\nSo:\n\n- **If the device size \\(W/L\\) is fixed** and you increase \\(V_{OV}\\) by increasing \\(V_{GS}\\), then  \n  \\[\n  g_m=\\mu C_{ox}(W/L)V_{OV}\n  \\]\n  increases. **Student A is correct.**\n\n- **If the drain current \\(I_D\\) is fixed**, as in many analog design comparisons, then  \n  \\[\n  g_m=\\frac{2I_D}{V_{OV}}\n  \\]\n  decreases as \\(V_{OV}\\) increases. **Student B is correct.** To increase \\(V_{OV}\\) at fixed current, you would usually reduce \\(W/L\\), which lowers \\(g_m\\).\n\nSo the correct answer is: **it depends on what is held constant.** For a fixed transistor with increasing gate voltage, \\(g_m\\) goes up. For a fixed bias-current design, higher overdrive gives lower \\(g_m\\). Real short-channel effects can modify the details, but the apparent contradiction comes from different assumptions.",
        "format": "markdown",
        "sha256": "c1a7364891f0804b2321f2d24862728d73a1a6249c380703e5cb3503869467ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size and explains that gm rises with VOV; it also correctly qualifies Student B's result as applying at fixed ID.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 51,
        "output_tokens": 2335,
        "total_tokens": 2386,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2037,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 51,
        "output_tokens": 2335,
        "total_tokens": 2386,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2037,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both can be correct — the question is underspecified.\n\nAssuming a long-channel MOSFET in saturation:\n\n\\[\nI_D=\\frac12 \\mu_n C_{ox}\\frac WL V_{OV}^2\n\\]\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}\n= \\mu_n C_{ox}\\frac WL V_{OV}\n= \\frac{2I_D}{V_{OV}}\n= \\sqrt{2\\mu_n C_{ox}\\frac WL I_D}\n\\]\n\nSo:\n\n- **For a fixed transistor** \\((W/L,\\ \\mu_n C_{ox}\\text{ fixed})\\), increasing \\(V_{OV}\\) by increasing \\(V_{GS}\\) raises \\(I_D\\) and\n\n\\[\ng_m \\propto V_{OV}\n\\]\n\nso **Student A is correct**.\n\n- **For a fixed drain current** \\(I_D\\), which is common in analog design comparisons, increasing \\(V_{OV}\\) requires reducing \\(W/L\\), and\n\n\\[\ng_m = \\frac{2I_D}{V_{OV}}\n\\]\n\nso \\(g_m\\) decreases as \\(V_{OV}\\) increases. In that sense **Student B is correct**. Equivalently, the transconductance efficiency is\n\n\\[\n\\frac{g_m}{I_D}=\\frac{2}{V_{OV}},\n\\]\n\nwhich definitely goes down as overdrive increases.\n\nSo: **for a given physical MOSFET biased harder, A is right; for fixed-current design or \\(g_m/I_D\\), B is right.** The missing question is: *what is being held constant?*",
        "format": "markdown",
        "sha256": "d70d09fb3cf9cf705456b9eb40767228b0be5f26e14ece1b8d181c94a11103a4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that for a fixed transistor size, increasing overdrive raises gm and Student A is right. It also appropriately qualifies Student B as correct only when drain current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 51,
        "output_tokens": 2684,
        "total_tokens": 2735,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2364,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 51,
        "output_tokens": 2684,
        "total_tokens": 2735,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2364,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: **the topology is the same, but the polarities/current directions are not literally identical unless you define the variables carefully.** A PMOS small-signal model is essentially the **mirrored/sign-reversed** version of the NMOS model.\n\nIf you use a consistent terminal convention—current \\(i_d\\) entering the drain, and\n\n\\[\nv_{gs}=v_g-v_s,\\quad v_{ds}=v_d-v_s,\\quad v_{bs}=v_b-v_s\n\\]\n\nthen the linearized saturation model for **both** NMOS and PMOS can be written as\n\n\\[\ni_d = g_m v_{gs} + g_o v_{ds} + g_{mb} v_{bs},\n\\qquad g_o=\\frac{1}{r_o}\n\\]\n\nwith \\(g_m,g_o,g_{mb}\\) defined as derivatives at the bias point. For a PMOS in forward-active/saturation, \\(I_D\\), \\(V_{GS}\\), and \\(V_{DS}\\) are negative under this convention, but the small-signal parameters are usually quoted as positive magnitudes:\n\n\\[\ng_m = \\frac{2|I_D|}{V_{SG}-|V_{TP}|},\\qquad\nr_o \\approx \\frac{1}{\\lambda |I_D|}.\n\\]\n\nSo a negative \\(v_{gs}\\) produces a negative \\(i_d\\), meaning the physical current flows from source to drain.\n\nEquivalently, for hand analysis many people define PMOS variables with all-positive source-referenced quantities:\n\n\\[\nv_{sg}=v_s-v_g,\\quad v_{sd}=v_s-v_d,\\quad i_{sd}=-i_d\n\\]\n\nso, ignoring body effect,\n\n\\[\ni_{sd}=g_m v_{sg}+g_o v_{sd}.\n\\]\n\nThen the controlled current source is drawn **from source to drain** with value \\(g_m v_{sg}\\). This is just the NMOS model flipped.\n\nSo:\n\n- **Same small-signal topology:** \\(g_m\\) source, \\(r_o\\), body-effect source if needed, capacitances in analogous places.\n- **Different polarities/sign conventions:** PMOS uses \\(V_{SG}, V_{SD}, |V_{TP}|\\) or negative \\(V_{GS},V_{DS},I_D\\).\n- **Different parameters:** \\(\\mu_p\\), \\(|V_{TP}|\\), \\(\\lambda\\), body-effect coefficient, junction capacitances, etc., generally differ.\n\nFor high-frequency models, the intrinsic capacitances are placed similarly, but body/source/drain junction diode polarities and well connections are PMOS-specific.",
        "format": "markdown",
        "sha256": "dd032cbc4bcbefb6be997a13399029475b6e1637609e68d6f625e2582e192b6a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS model has the same topology/form as the NMOS model with consistent sign conventions; this earns full credit under the golden solution's rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 41,
        "output_tokens": 13896,
        "total_tokens": 13937,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 41,
        "output_tokens": 13896,
        "total_tokens": 13937,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: **the topology is the same, but the polarities/sign conventions are reversed**. So a PMOS small-signal model is not “identical” to an NMOS model unless you define currents and voltages carefully.\n\nA convenient unified convention is:\n\n- \\(i_d\\): small-signal current **into the drain**\n- \\(v_{gs}=v_g-v_s\\)\n- \\(v_{ds}=v_d-v_s\\)\n\nThen, in saturation, both NMOS and PMOS can be written in the same linearized form:\n\n\\[\ni_d = g_m v_{gs} + g_o v_{ds}\n\\]\n\nwith \\(r_o = 1/g_o\\). With body effect included, a \\(g_{mb} v_{bs}\\)-type term is added, with its sign following the chosen body-voltage convention.\n\nFor a PMOS, the dc drain current \\(I_D\\) is negative under this convention, but\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}}, \\qquad g_o = \\frac{\\partial I_D}{\\partial V_{DS}}\n\\]\n\nare still positive at normal bias. Typically,\n\n\\[\ng_m \\approx \\frac{2|I_D|}{V_{SG}-|V_{TP}|}, \\qquad g_o \\approx \\lambda |I_D|.\n\\]\n\nSo with this convention, the PMOS small-signal circuit looks like the NMOS one: a \\(g_m v_{gs}\\) controlled current source between drain and source, plus \\(r_o\\).\n\nHowever, if you instead use PMOS-friendly variables,\n\n\\[\nv_{sg}=v_s-v_g,\\qquad v_{sd}=v_s-v_d,\\qquad i_{sd}>0\n\\]\n\nwhere \\(i_{sd}\\) flows from source to drain, then\n\n\\[\ni_{sd}=g_m v_{sg}+g_o v_{sd}\n\\]\n\nand the controlled current source points from **source to drain**, the opposite direction from the NMOS model.\n\nSo the bottom line is:\n\n**Same basic small-signal model structure, but PMOS voltage/current polarities and controlled-source direction are reversed. Numerical values also differ due to PMOS parameters and bias.**",
        "format": "markdown",
        "sha256": "dbfa05a9a8619d2031e7dc2e151fc47295c0e23b8e695fa235c28a0f30b78bed"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same basic form as the NMOS model, with polarity and sign conventions reversed.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 41,
        "output_tokens": 10554,
        "total_tokens": 10595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 41,
        "output_tokens": 10554,
        "total_tokens": 10595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: **the topology is the same, but the signs/directions are not identical unless you define them carefully.**\n\nFor a low-frequency saturated MOS model, using the usual SPICE/NMOS convention\n\n\\[\nv_{gs}=v_g-v_s,\\quad v_{ds}=v_d-v_s,\\quad i_d=\\text{small-signal current entering the drain}\n\\]\n\nan NMOS gives\n\n\\[\ni_d = g_m v_{gs}+g_o v_{ds}\\quad(\\text{plus } g_{mb}v_{bs}\\text{ if body effect is included})\n\\]\n\nwith \\(g_m,g_o,g_{mb}>0\\).\n\nFor a PMOS, the dc operating point has\n\n\\[\nV_{GS}<0,\\quad V_{DS}<0,\\quad I_D<0\n\\]\n\nif \\(I_D\\) is defined entering the drain. But linearizing the PMOS equation gives a similar form:\n\n\\[\ni_d = g_m v_{gs}+g_o v_{ds}\n\\]\n\nwhere\n\n\\[\ng_m=\\frac{2|I_D|}{V_{SG}-|V_{TP}|},\\qquad g_o\\approx \\lambda_p |I_D|.\n\\]\n\nSo in this convention, the **incremental equations can look identical**. But the PMOS dc current is physically from source to drain, while the NMOS dc current is from drain to source.\n\nIf instead you use the more natural PMOS variables,\n\n\\[\ni_{sd}>0 \\text{ from source to drain},\\quad v_{sg}=v_s-v_g,\\quad v_{sd}=v_s-v_d,\n\\]\n\nthen\n\n\\[\ni_{sd}=g_m v_{sg}+g_o v_{sd},\n\\]\n\nor, in terms of NMOS-style \\(v_{gs}\\),\n\n\\[\ni_{sd}=-g_m v_{gs}.\n\\]\n\nSo the PMOS current-source arrow/control-voltage polarity is reversed; some books therefore describe the PMOS \\(g_m\\) as “negative” relative to \\(v_{gs}\\).\n\nAlso, numerically the parameters differ: \\(\\mu_p\\) is usually smaller than \\(\\mu_n\\), \\(|V_{TP}|\\), \\(\\lambda_p\\), body factor, junction capacitances, and bulk/diode polarities are different.\n\n**Bottom line:** the PMOS small-signal model has the **same equivalent-circuit form** as the NMOS model, but you must reverse the dc voltage/current polarities or choose a consistent sign convention. Do not copy the NMOS model blindly; define the current direction first.",
        "format": "markdown",
        "sha256": "822788e5f2da6ff7170cbf6df5c946cc2ddd00b5a8baddbec978c1c83c2ec1f5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model, with polarity and sign conventions handled consistently.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 41,
        "output_tokens": 13694,
        "total_tokens": 13735,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13174,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 41,
        "output_tokens": 13694,
        "total_tokens": 13735,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13174,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Taking \\(M_1\\) as the enhancement-mode NMOS shown, its source (and body) is grounded, while gate and drain are tied to \\(V_X\\). Hence\n\n\\[\nV_{GS}=V_{DS}=V_X,\\qquad I_X=I_D .\n\\]\n\nFor \\(V_X<V_{TN}\\), the device is off and \\(I_X\\simeq 0\\).\n\nFor \\(V_X\\ge V_{TN}\\), the saturation condition\n\n\\[\nV_{DS}\\ge V_{GS}-V_{TN}\n\\]\n\nis always satisfied because \\(V_X\\ge V_X-V_{TN}\\). Thus the transistor goes directly from cutoff to saturation, with\n\n\\[\n\\boxed{\nI_X=\n\\begin{cases}\n0, & V_X<V_{TN},\\\\[4pt]\n\\dfrac{1}{2}\\mu_n C_{\\rm ox}\\dfrac WL\\,(V_X-V_{TN})^2,\n& V_X\\ge V_{TN}.\n\\end{cases}}\n\\]\n\nWith channel-length modulation, multiply the second expression by \\(1+\\lambda V_X\\).\n\nThe ideal sketch is therefore a zero-current line followed by a shifted, upward-curving parabola:\n\n```text\n I_X\n  ↑\n  |                              ╭──\n  |                          ╭───╯\n  |                       ╭──╯\n  |                    ╭──╯\n  |___________________╯________________→ V_X\n                     V_TN\n```\n\nThe curve starts at \\(V_X=V_{TN}\\) with zero slope, \\(dI_X/dV_X=0\\).\n\nFor a real device swept into negative \\(V_X\\), the drain-to-body diode—body tied to ground—turns on near \\(-0.7\\ \\text{V}\\), producing a rapidly increasing negative \\(I_X\\). This branch is normally omitted in the ideal MOS square-law sketch.",
        "format": "markdown",
        "sha256": "124ce930f600f458fadddbad03b0fc6cc897a2435e962cf6424b3a2ea1cac9cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives near-zero current below threshold and a quadratic saturation-current rise above it, and sketches the trend. The optional channel-length-modulation and negative-voltage comments are consistent.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 981,
        "output_tokens": 20447,
        "total_tokens": 21428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20066,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 981,
        "output_tokens": 20447,
        "total_tokens": 21428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20066,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming an enhancement nMOS with its body tied to the grounded source, \\(M_1\\) is diode-connected:\n\n\\[\nV_G=V_D=V_X,\\qquad V_S=0,\\qquad V_{GS}=V_{DS}=V_X.\n\\]\n\nFor \\(V_X>V_{TH}\\), the saturation condition\n\n\\[\nV_{DS}\\ge V_{GS}-V_{TH}\n\\]\n\nis automatically satisfied, so there is no triode region. Thus, neglecting channel-length modulation and subthreshold conduction,\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\le V_{TH},\\\\[2mm]\n\\dfrac{\\beta_n}{2}(V_X-V_{TH})^2, & V_X>V_{TH},\n\\end{cases}\n\\qquad\n\\beta_n=\\mu_nC_{\\rm ox}\\frac WL .\n\\]\n\nWith channel-length modulation, multiply the second expression by \\(1+\\lambda V_X\\).\n\nHence the curve is flat at zero until \\(V_{TH}\\), then rises as a parabola with zero initial slope:\n\n```text\n I_X\n  ↑                                      .-  square law\n  |                                   .-'\n  |                                .-'\n  0──────────────●──────────────●──'────────────→ V_X\n  |           _/              V_TH\n  |        _/\n  |     _/    body diode (I_X < 0)\n  |  _/\n    -V_D,on ≈ -0.7 V\n```\n\nIf negative \\(V_X\\) is included in a physical device, the channel remains off, since the lower-potential \\(n^+\\) terminal becomes the source and is tied to the gate, giving \\(V_{GS}=0\\). However, the p-body-to-n-drain junction becomes forward-biased near \\(V_X\\approx-0.7\\text{ V}\\). Its current flows from ground into the \\(V_X\\) node, opposite to the indicated \\(I_X\\), so \\(I_X\\) rapidly becomes negative:\n\n\\[\nI_X\\approx -I_S\\left(e^{-V_X/(\\eta V_T)}-1\\right),\n\\]\n\nwhere \\(V_T=kT/q\\). If parasitic body diodes are neglected, simply omit this negative branch and keep \\(I_X=0\\) for all \\(V_X<V_{TH}\\).",
        "format": "markdown",
        "sha256": "f81bfe9435af0aa7e00aabaf8980f14864aca00ea1ba7eb55434d220a5fe4941"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current through threshold, and shows the quadratic rise above threshold. The optional negative-voltage discussion does not affect the essential answer.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 981,
        "output_tokens": 24558,
        "total_tokens": 25539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24076,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 981,
        "output_tokens": 24558,
        "total_tokens": 25539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24076,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The device is a **diode-connected NMOS**:\n\n\\[\nV_G=V_D=V_X,\\qquad V_S=V_B=0\n\\]\n\nso\n\n\\[\nV_{GS}=V_{DS}=V_X .\n\\]\n\nWhenever it conducts, \\(V_{DS}>V_{GS}-V_{TN}\\), hence \\(M_1\\) is in saturation. With \\(\\beta_n=\\mu_nC_{ox}(W/L)\\),\n\n\\[\nI_X \\simeq\n\\begin{cases}\n0, & V_X<V_{TN},\\\\[4pt]\n\\dfrac{\\beta_n}{2}(V_X-V_{TN})^2, & V_X\\ge V_{TN}.\n\\end{cases}\n\\]\n\nThus the curve is zero up to \\(V_{TN}\\), then rises as a concave-up parabola starting with zero slope. If channel-length modulation is included, multiply the second expression by \\(1+\\lambda V_X\\).\n\nFor the complete physical transistor, the drain-to-body junction diode is also present. At approximately \\(V_X=-V_{D,\\mathrm{on}}\\approx-0.7\\text{ V}\\), this diode forward-biases, producing current from ground toward the voltage source. With \\(I_X\\) defined into the transistor as drawn, this is negative current:\n\n\\[\nI_X\\approx -I_S\\left[e^{-V_X/(nV_T)}-1\\right].\n\\]\n\nThe qualitative sketch is therefore\n\n```text\n I_X\n  ↑\n  |                                              __/\n  |                                           _/\n  |                                        _/\n  |_______________________________________●____________→ V_X\n  |             ________________________/  V_TN\n  |          __/\n  |       __/\n  |     _/\n  |   _/\n  |  /\n  +------ -V_D,on ---------------------- V_TN\n```\n\nThere is a nearly zero-current region\n\n\\[\n-V_{D,\\mathrm{on}}\\lesssim V_X<V_{TN},\n\\]\n\nwith a steep negative diode branch on the left and the square-law MOS branch on the right. If junction diodes are neglected—as in the usual ideal square-law model—the negative-voltage branch is omitted and \\(I_X\\simeq0\\) for all \\(V_X<V_{TN}\\).",
        "format": "markdown",
        "sha256": "024748455be46a2ada1889ad5680055030c77bf75c0c914412083dc537a72c29"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, with approximately zero current below threshold and a quadratic rise above it. The additional negative-voltage junction-diode discussion is consistent and not required.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 981,
        "output_tokens": 19781,
        "total_tokens": 20762,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19320,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 981,
        "output_tokens": 19781,
        "total_tokens": 20762,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19320,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The lower grounded terminal is the NMOS source, so\n\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\text{ V},\\qquad I_X=I_D\n\\]\n\nin the indicated direction. Let\n\n\\[\n\\beta_n=\\mu_n C_{\\rm ox}\\frac WL .\n\\]\n\nNeglecting channel-length modulation and subthreshold conduction,\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\le V_{TH},\\\\[4pt]\n\\dfrac{\\beta_n}{2}(V_X-V_{TH})^2,\n& V_{TH}<V_X\\le V_{TH}+1\\text{ V}\n\\quad\\text{(saturation)},\\\\[8pt]\n\\beta_n\\left[(V_X-V_{TH})(1\\text{ V})\n-\\dfrac{(1\\text{ V})^2}{2}\\right],\n& V_X>V_{TH}+1\\text{ V}\n\\quad\\text{(triode)}.\n\\end{cases}\n\\]\n\nThus the sketch is:\n\n```text\n I_X\n  ^\n  |                                  /\n  |                                /   linear (triode)\n  |                             /\n  |                         •  V_TH + 1 V\n  |                      _/\n  |                   _/\n  |                _/     quadratic (saturation)\n  |_____________/\n  +-------------|--------------------|----------> V_X\n                V_TH              V_TH + 1 V\n```\n\nAt \\(V_X=V_{TH}+1\\text{ V}\\), both the current and slope are continuous. If \\(V_X\\) is swept only from \\(0\\) to \\(1\\text{ V}\\), then for \\(V_{TH}>0\\) the triode breakpoint lies outside the sweep, so only the zero-current and quadratic saturation portions are seen.",
        "format": "markdown",
        "sha256": "b9d296aac77eac9ded6b805f3d611c83ab72e5b1b1aa90ee33d2b772c951e310"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS operating regions and gives the zero, quadratic-saturation, and roughly linear-triode portions with the correct breakpoint at V_X = V_TH + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1141,
        "output_tokens": 14437,
        "total_tokens": 15578,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14077,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1141,
        "output_tokens": 14437,
        "total_tokens": 15578,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14077,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is a long-channel enhancement nMOS device with threshold \\(V_{TH}\\), the 1-V source fixes\n\n\\[\nV_D=1\\text{ V},\\qquad V_S=0,\\qquad V_{DS}=1\\text{ V},\\qquad V_{GS}=V_X,\n\\]\n\nand \\(I_X=I_D\\). Let \\(\\beta_n=\\mu_nC_{\\rm ox}(W/L)\\). Neglecting channel-length modulation,\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\le V_{TH},\\\\[4pt]\n\\dfrac{\\beta_n}{2}(V_X-V_{TH})^2,\n& V_{TH}<V_X<V_{TH}+1\\text{ V}\n\\quad\\text{(saturation)},\\\\[8pt]\n\\beta_n\\!\\left[(V_X-V_{TH})(1\\text{ V})-\\dfrac{(1\\text{ V})^2}{2}\\right],\n& V_X\\ge V_{TH}+1\\text{ V}\n\\quad\\text{(triode)}.\n\\end{cases}\n\\]\n\nAt \\(V_X=V_{TH}+1\\text{ V}\\),\n\n\\[\nI_X=I_b=\\frac{\\beta_n}{2}(1\\text{ V})^2,\n\\]\n\nand the quadratic and linear sections have the same slope, so the curve is smooth there.\n\n```text\n I_X\n  ↑\n  |                                      /  triode: linear\n  |                                    /\nI_b|                             ●────/\n  |                         _.-'\n  |                    _.-'       saturation: quadratic\n  |               _.-'\n0 |──────────────●──────────────────────────→ V_X\n                V_TH        V_TH + 1 V\n```\n\nThus \\(I_X\\) is zero below threshold, rises quadratically while the device is saturated, and then becomes a straight line of slope \\(\\beta_n(1\\text{ V})\\) in the triode region. Channel-length modulation slightly scales the saturation portion; subthreshold leakage rounds the corner near \\(V_{TH}\\).",
        "format": "markdown",
        "sha256": "9807402b8c7992043d89e12f79687a1ada99163972fea1e83cfb1fb098722dfa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions and gives the expected quadratic-to-linear current curve with the correct transition voltage.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1141,
        "output_tokens": 14188,
        "total_tokens": 15329,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13759,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1141,
        "output_tokens": 14188,
        "total_tokens": 15329,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13759,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The right-pointing source arrow identifies \\(M_1\\) as an NMOS. Its source is grounded and its drain is held at \\(+1\\,\\text{V}\\), so\n\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\,\\text{V},\\qquad I_X=I_D .\n\\]\n\nLet\n\n\\[\n\\beta=\\mu_n C_{\\mathrm{ox}}\\frac WL .\n\\]\n\nUsing the ideal square-law model and neglecting channel-length modulation:\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\le V_{TH},\\\\[6pt]\n\\dfrac{\\beta}{2}(V_X-V_{TH})^2,\n& V_{TH}<V_X\\le V_{TH}+1\\,\\text{V}\n\\quad\\text{(saturation)},\\\\[8pt]\n\\beta\\left[(V_X-V_{TH})(1\\,\\text{V})\n-\\dfrac{(1\\,\\text{V})^2}{2}\\right],\n& V_X>V_{TH}+1\\,\\text{V}\n\\quad\\text{(triode)}.\n\\end{cases}\n\\]\n\nAt the transition,\n\n\\[\nV_X=V_{TH}+1\\,\\text{V},\\qquad\nI_0=\\frac{\\beta}{2}(1\\,\\text{V})^2,\n\\]\n\nand the quadratic saturation curve joins the straight triode line smoothly, with slope \\(\\beta(1\\,\\text{V})\\).\n\nEquivalently, with\n\n\\[\nu=\\frac{V_X-V_{TH}}{1\\,\\text{V}},\\qquad\nI_0=\\frac{\\beta}{2}(1\\,\\text{V})^2,\n\\]\n\n\\[\n\\frac{I_X}{I_0}=\n\\begin{cases}\n0,&u\\le0,\\\\\nu^2,&0<u\\le1,\\\\\n2u-1,&u>1.\n\\end{cases}\n\\]\n\nQualitatively:\n\n```text\nI_X\n ↑\n |                                             /\n |                                          /\n |                                       /\n |                                    ●  V_TH+1 V, I_0\n |                              _..-'\n |                        _..-'      quadratic saturation\n |                   _..-'\n |________________●________________________________→ V_X\n                 V_TH\n```\n\nThus the curve is zero until \\(V_{TH}\\), rises quadratically, and then becomes a straight line for \\(V_X>V_{TH}+1\\,\\text{V}\\). Real devices add a small subthreshold tail below \\(V_{TH}\\), and mobility degradation can bend the high-\\(V_X\\) line downward.",
        "format": "markdown",
        "sha256": "a027c154dba06d5a13a4d8d546b4cdef7c7705c150528938d1d6b0453a52d3dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the operating regions and gives the zero-below-threshold, quadratic saturation, and roughly linear triode-region behavior, with the transition at V_X = V_TH + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1141,
        "output_tokens": 18648,
        "total_tokens": 19789,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1141,
        "output_tokens": 18648,
        "total_tokens": 19789,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The arrow on the upper lead identifies \\(M_1\\) as a **PMOS**, with the source at the top and the drain grounded. Let the source voltage be \\(V_X\\). With\n\n\\[\nV_G=V_D=0,\\qquad V_S=V_X,\n\\]\n\na downward current \\(I_X\\) raises \\(V_X\\). Once \\(V_X>|V_{Tp}|\\),\n\n\\[\nV_{SG}=V_X,\\qquad V_{SD}=V_X,\n\\]\n\nso the PMOS saturation condition\n\n\\[\nV_{SD}\\ge V_{SG}-|V_{Tp}|\n\\]\n\nis always satisfied. Ignoring channel-length modulation,\n\n\\[\nI_X \\simeq \\frac12\\mu_p C_{ox}\\frac WL\\,(V_X-|V_{Tp}|)^2,\n\\]\n\nand therefore\n\n\\[\nV_X\\simeq |V_{Tp}|+\\sqrt{\\frac{2I_X}{\\mu_p C_{ox}(W/L)}}.\n\\]\n\nThus the transistor can turn on and carry an externally forced current; it is essentially a **gate–drain-shorted, diode-connected PMOS**.\n\nHowever, it is **not a useful constant-current/high-output-resistance source**. Its current depends strongly on \\(V_X\\), and the resistance seen looking into the source is approximately\n\n\\[\nr_{\\text{out}}\\approx \\frac{1}{g_m+g_{mb}+g_o}\\approx \\frac{1}{g_m},\n\\]\n\nrather than the large \\(r_o\\) obtained when \\(V_{SG}\\) is fixed and the output is taken at the drain.\n\nSo: **it can support a forced \\(I_X\\) while operating in saturation, but in the usual circuit sense it behaves as a low-resistance, diode-connected device—not as a good current source.**\n\nIf the symbol were instead intended as an enhancement NMOS with \\(V_G=V_S=0\\), it would simply be off, apart from leakage or junction breakdown.",
        "format": "markdown",
        "sha256": "c98a24864fda62d68fb687bf66e32873316c08141ec886ef437b94dfaf43eb11"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS and its grounded gate/drain connections, derives its diode-connected behavior, and explains that its roughly 1/gm input resistance makes it unsuitable as a current source. The forced-current caveat does not contradict that conclusion.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 452,
        "output_tokens": 24664,
        "total_tokens": 25116,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24267,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 452,
        "output_tokens": 24664,
        "total_tokens": 25116,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24267,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **diode-connected pMOS**: the gate and drain are grounded, while current enters the source.\n\nLet the source voltage be \\(V_X\\). For \\(V_X>|V_{Tp}|\\),\n\n\\[\nV_{SG}=V_{SD}=V_X ,\n\\]\n\nso the pMOS saturation condition\n\n\\[\nV_{SD}\\ge V_{SG}-|V_{Tp}|\n\\]\n\nis always satisfied. Thus an externally forced current \\(I_X\\) can be carried, with\n\n\\[\nI_X \\approx \\frac{1}{2}\\mu_p C_{ox}\\frac WL\n          \\left(V_X-|V_{Tp}|\\right)^2(1+\\lambda V_X),\n\\]\n\nor\n\n\\[\nV_X \\approx |V_{Tp}|+\\sqrt{\\frac{2I_X}{\\mu_pC_{ox}(W/L)}} .\n\\]\n\nHowever, \\(M_1\\) is **not a useful standalone constant-current source**. Its current depends strongly on its terminal voltage, and the resistance looking into the source is approximately\n\n\\[\nr \\approx \\frac{1}{g_m+g_o}\\approx \\frac{1}{g_m},\n\\]\n\nwhich is much smaller than the high output resistance \\(r_o\\) of a properly biased saturated transistor. It behaves as a diode-connected nonlinear resistor and is commonly used to generate a bias voltage from a reference current, e.g. in a current mirror.\n\nSo: **yes, it can carry an imposed current and establish a bias voltage; no, it is not by itself a high-output-resistance current source.** To obtain one, hold \\(V_{SG}\\) constant and use the drain as the output, or mirror \\(V_X\\) onto another transistor.",
        "format": "markdown",
        "sha256": "b33be615f2069e5a3bc58ade14a1d787c9bed23400f0863e62dbe4dcb7469cb8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected PMOS and its grounded gate/drain, explains that its low source resistance (about 1/gm) makes it a nonlinear resistor rather than a current source, and concludes it is not a standalone current source. Carrying an externally imposed current is correctly distinguished from sourcing a nearly constant current.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 384,
        "input_tokens": 452,
        "output_tokens": 21761,
        "total_tokens": 22213,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21410,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 384,
        "input_tokens": 452,
        "output_tokens": 21761,
        "total_tokens": 22213,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21410,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends on what “current source” means.\n\nReading the source arrow, \\(M_1\\) is a pMOS with its **gate and drain grounded** and its source at the \\(I_X\\) node. Let \\(V_X=V_S\\). Then\n\n\\[\nV_{SG}=V_{SD}=V_X .\n\\]\n\nIf a current \\(I_X\\) is forced into the source, \\(V_X\\) rises until \\(M_1\\) turns on. For \\(V_X>|V_{TP}|\\),\n\n\\[\nI_X \\simeq \\frac12\\mu_p C_{\\rm ox}\\frac WL\n\\left(V_X-|V_{TP}|\\right)^2(1+\\lambda_p V_X),\n\\]\n\nor, neglecting channel-length modulation,\n\n\\[\nV_X \\simeq |V_{TP}|+\n\\sqrt{\\frac{2I_X}{\\mu_pC_{\\rm ox}(W/L)}} .\n\\]\n\nSince\n\n\\[\nV_{SD}=V_{SG} \\ge V_{SG}-|V_{TP}|,\n\\]\n\n\\(M_1\\) is in saturation whenever it is on. Thus it **can carry/sink an externally imposed \\(I_X\\)**.\n\nHowever, gate and drain are electrically tied together, so this is a **diode-connected MOS transistor**. Its current depends strongly on the terminal voltage, and its small-signal resistance looking into the source is\n\n\\[\nr_{\\rm in}\\approx \\frac{1}{g_m}\n\\quad\\left[\\text{more exactly } \\frac{1}{g_m+g_{mb}+g_o}\\right],\n\\]\n\nwhich is low, not the high output resistance expected of a current source. It converts a reference current into a voltage and is commonly used as the reference leg of a current mirror.\n\n**So:** yes, it can sustain a forced current while saturated; no, it is not by itself a voltage-independent, high-output-resistance current source.",
        "format": "markdown",
        "sha256": "b472b27d6f4fa112f698a6fed6f9f7838efd70e38eaf3636c22c11ab149b10c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS and its connections, and explains that the diode-connected device has low small-signal resistance and is not a voltage-independent current source. Its distinction between carrying an imposed current and acting as a current source is appropriate.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 384,
        "input_tokens": 452,
        "output_tokens": 21910,
        "total_tokens": 22362,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21524,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 384,
        "input_tokens": 452,
        "output_tokens": 21910,
        "total_tokens": 22362,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21524,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nThe arrow indicates a **PMOS transistor**. Its source is the upper terminal connected through \\(R_S\\) to \\(V_{DD}\\), and its drain is the \\(V_{\\text{out}}\\) node connected through \\(R_D\\) to ground.\n\nThus this is an **inverting common-source stage with source degeneration**, not a source follower:\n\n- \\(v_{\\text{in}}\\uparrow \\Rightarrow |V_{SG}|\\downarrow \\Rightarrow I\\downarrow\\)\n- \\(V_{\\text{out}}=IR_D\\downarrow\\)\n\nso the small-signal gain is negative.\n\n---\n\n## 2. DC operation\n\nLet \\(I\\ge 0\\) be the current flowing downward:\n\n\\[\nV_{DD}\\rightarrow R_S\\rightarrow M_1\\rightarrow R_D\\rightarrow 0.\n\\]\n\nFor an unloaded output,\n\n\\[\nV_S=V_{DD}-IR_S,\n\\qquad\nV_{\\text{out}}=V_D=IR_D.\n\\]\n\nTherefore,\n\n\\[\nV_{SG}=V_{DD}-V_{\\text{in}}-IR_S,\n\\]\n\n\\[\nV_{SD}=V_S-V_D\n      =V_{DD}-I(R_S+R_D).\n\\]\n\n### Saturation-region bias equation\n\nNeglecting channel-length modulation initially,\n\n\\[\nI=\\frac{\\beta_p}{2}\n  \\left(V_{SG}-|V_{Tp}|\\right)^2,\n\\qquad\n\\beta_p=\\mu_p C_{\\rm ox}\\frac WL.\n\\]\n\nHence\n\n\\[\n\\boxed{\nI=\\frac{\\beta_p}{2}\n\\left[V_{DD}-V_{\\text{in}}-IR_S-|V_{Tp}|\\right]^2\n}\n\\]\n\nwhich must generally be solved together with the resistor equations.\n\nIf body effect and channel-length modulation are neglected, define\n\n\\[\nA=V_{DD}-V_{\\text{in}}-|V_{Tp}|.\n\\]\n\nFor \\(A>0\\),\n\n\\[\nV_{OV}\n=\\frac{\\sqrt{1+2\\beta_pR_SA}-1}{\\beta_pR_S},\n\\]\n\n\\[\nI=\\frac{\\beta_p}{2}V_{OV}^2,\n\\qquad\nV_{\\text{out}}=IR_D.\n\\]\n\nIf \\(A\\le 0\\), \\(M_1\\) is off, \\(I=0\\), \\(V_{\\text{out}}=0\\), and \\(V_S=V_{DD}\\).\n\n### Body effect\n\nIf the PMOS n-well is tied to \\(V_{DD}\\), then\n\n\\[\nV_{BS}=V_B-V_S=IR_S,\n\\]\n\nand\n\n\\[\n|V_{Tp}|=|V_{Tp0}|+\\gamma_p\n\\left[\n\\sqrt{2|\\phi_F|+V_{BS}}-\\sqrt{2|\\phi_F|}\n\\right].\n\\]\n\nThus both the DC current and small-signal gain are affected by body effect. If the body is tied locally to the source, this term is absent.\n\nWith channel-length modulation,\n\n\\[\nI=\\frac{\\beta_p}{2}\n\\left(V_{SG}-|V_{Tp}|\\right)^2\n\\left(1+\\lambda_pV_{SD}\\right).\n\\]\n\n---\n\n## 3. Operating-region conditions\n\nFor saturation,\n\n\\[\nV_{SD}\\ge V_{SG}-|V_{Tp}|.\n\\]\n\nUsing the node voltages,\n\n\\[\n\\boxed{\nV_{\\text{out}}\\le V_{\\text{in}}+|V_{Tp}|\n}\n\\]\n\nwhere \\(|V_{Tp}|\\) is evaluated at the actual source-body bias. If this condition is violated, \\(M_1\\) enters triode and\n\n\\[\nI=\\beta_p\\left[\n\\left(V_{SG}-|V_{Tp}|\\right)V_{SD}\n-\\frac{V_{SD}^2}{2}\n\\right].\n\\]\n\nThere is also a resistive upper bound:\n\n\\[\nV_{\\text{out}}\\le V_{DD}\\frac{R_D}{R_S+R_D},\n\\]\n\ncorresponding to the limiting case where the transistor behaves nearly as a short.\n\n---\n\n## 4. Low-frequency voltage gain\n\nTreat \\(V_{DD}\\) as ac ground. Let\n\n- \\(g_m=\\partial I/\\partial V_{SG}>0\\),\n- \\(g_o=1/r_o\\),\n- \\(g_{mb}\\ge0\\) be the body-effect transconductance magnitude,\n- \\(R_D'=R_D\\parallel R_L\\), with \\(R_D'=R_D\\) for an unloaded output.\n\nFor small changes,\n\n\\[\ni=(g_m+g_{mb}+g_o)v_s-g_m v_{\\text{in}}-g_o v_{\\text{out}},\n\\]\n\nwhile the external resistors give\n\n\\[\nv_s=-iR_S,\n\\qquad\nv_{\\text{out}}=iR_D'.\n\\]\n\nConsequently,\n\n\\[\n\\boxed{\nA_v\\equiv\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n-\\frac{g_mR_D'}\n{1+(g_m+g_{mb}+g_o)R_S+g_oR_D'}\n}\n\\]\n\nImportant special cases:\n\n### No body effect, no channel-length modulation\n\n\\[\n\\boxed{\nA_v=-\\frac{g_mR_D}{1+g_mR_S}\n}\n\\]\n\nor with a load,\n\n\\[\nA_v=-\\frac{g_m(R_D\\parallel R_L)}\n{1+g_mR_S}.\n\\]\n\n### Including body effect but \\(r_o\\to\\infty\\)\n\n\\[\n\\boxed{\nA_v=-\\frac{g_mR_D}\n{1+(g_m+g_{mb})R_S}\n}\n\\]\n\nThus source degeneration and body effect both reduce the magnitude of the gain. For \\(g_mR_S\\gg1\\), with negligible \\(g_{mb}\\) and \\(g_o\\),\n\n\\[\nA_v\\approx-\\frac{R_D}{R_S}.\n\\]\n\n---\n\n## 5. Input and output resistance\n\nThe low-frequency gate input resistance is ideally\n\n\\[\nR_{\\text{in}}\\to\\infty.\n\\]\n\nWith \\(v_{\\text{in}}\\) set to ac ground and finite transistor \\(r_o\\), the resistance looking into the drain of the transistor is\n\n\\[\nr_{o,\\mathrm{eff}}\n=r_o\\left[1+(g_m+g_{mb})R_S\\right]+R_S.\n\\]\n\nHence the total output resistance is\n\n\\[\n\\boxed{\nR_{\\text{out}}=R_D\\parallel r_{o,\\mathrm{eff}}\n}\n\\]\n\nand if channel-length modulation is neglected, \\(R_{\\text{out}}\\approx R_D\\).\n\nIn summary, the circuit is a PMOS, source-degenerated common-source amplifier with negative voltage gain. Numerical bias point and gain require \\(V_{DD},V_{\\text{in}},R_S,R_D,\\beta_p,V_{Tp}\\), and the body-effect/process parameters.",
        "format": "markdown",
        "sha256": "581a1b820b22cea9ba01e50242e22a30716fcd6d0886f45721c6662de762994f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS source-degenerated common-source stage and gives the inverting gain \u0002-g_mR_D/(1+g_mR_S)\u0002. The body-effect and finite-\u0002r_o\u0002 refinements are also consistent with the topology.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1235,
        "output_tokens": 23610,
        "total_tokens": 24845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1235,
        "output_tokens": 23610,
        "total_tokens": 24845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nThe arrow identifies \\(M_1\\) as a **p-channel MOSFET**. Its source is the upper terminal, connected to \\(V_{DD}\\) through \\(R_S\\), while its drain is the output node, connected to ground through \\(R_D\\).\n\nThus this is a **pMOS common-source amplifier with unbypassed source degeneration \\(R_S\\)**. For small signals, an ideal \\(V_{DD}\\) and ground are both AC ground.\n\n---\n\n## 2. DC operating point\n\nLet \\(I>0\\) be the current flowing from \\(V_{DD}\\) through \\(R_S\\), \\(M_1\\), and \\(R_D\\) to ground, and let \\(V_G=V_{in,Q}\\). Then\n\n\\[\nV_S=V_{DD}-IR_S ,\n\\]\n\n\\[\nV_D=V_{out,Q}=IR_D ,\n\\]\n\n\\[\nV_{SG}=V_{DD}-IR_S-V_G ,\n\\]\n\n\\[\nV_{SD}=V_{DD}-I(R_S+R_D).\n\\]\n\nNeglecting channel-length modulation and body effect, saturation current is\n\n\\[\nI=\\frac{k_p}{2}\n\\left(V_{DD}-V_G-IR_S-V_{Tp}\\right)^2 ,\n\\qquad\nk_p=\\mu_pC_{ox}\\frac WL ,\n\\]\n\nwhere \\(V_{Tp}=|V_{TP}|\\). The output bias is simply\n\n\\[\n\\boxed{V_{out,Q}=IR_D}.\n\\]\n\nThe device requirements are\n\n\\[\nV_{SG}>V_{Tp}\n\\]\n\nand\n\n\\[\nV_{SD}\\ge V_{SG}-V_{Tp}\n\\quad\\Longleftrightarrow\\quad\nIR_D\\le V_G+V_{Tp}.\n\\]\n\nHence, as \\(V_{in}\\) increases, the pMOS current decreases and \\(V_{out}=IR_D\\) decreases: the stage is **inverting**. For very large \\(V_{in}\\), roughly \\(V_{in}\\ge V_{DD}-V_{Tp}\\), the transistor turns off and \\(V_{out}\\to0\\). For very low \\(V_{in}\\), the output rises until \\(M_1\\) leaves saturation and enters triode.\n\nIf the pMOS body is tied to \\(V_{DD}\\), body effect increases the threshold because \\(V_{BS}=IR_S\\); this should be included in the DC calculation.\n\n---\n\n## 3. Low-frequency voltage gain\n\nDefine \\(g_m=\\partial I/\\partial V_{SG}>0\\), approximately\n\n\\[\ng_m=\\frac{2I}{V_{SG}-V_{Tp}}=\\sqrt{2k_pI}.\n\\]\n\nFirst assume \\(r_o\\to\\infty\\), no body effect, and an ideal AC-grounded supply. Let \\(i\\) be the incremental source-to-drain current. For a pMOS,\n\n\\[\ni=g_m(v_s-v_{in}).\n\\]\n\nKCL at the source and drain gives\n\n\\[\n\\frac{v_s}{R_S}+i=0,\n\\qquad\n\\frac{v_{out}}{R_D}=i.\n\\]\n\nTherefore,\n\n\\[\n\\frac{v_s}{v_{in}}\n=\n\\frac{g_mR_S}{1+g_mR_S},\n\\]\n\nand\n\n\\[\n\\boxed{\\frac{v_{out}}{v_{in}}\n=\n-\\frac{g_mR_D}{1+g_mR_S}}.\n\\]\n\nThe source follows part of the input signal, reducing the effective \\(V_{SG}\\) variation. For \\(g_mR_S\\gg1\\),\n\n\\[\n\\boxed{A_v\\approx-\\frac{R_D}{R_S}},\n\\]\n\nso the gain is set mainly by a resistor ratio and is relatively insensitive to transistor parameters.\n\n---\n\n## 4. Including \\(r_o\\) and body effect\n\nLet \\(g_o=1/r_o\\). With the body at AC ground, an appropriate pMOS incremental source-to-drain current is\n\n\\[\ni=\ng_m(v_s-v_{in})\n+g_{mb}(v_s-v_b)\n+g_o(v_s-v_{out}),\n\\]\n\nwhere \\(v_b=0\\) for a body tied to \\(V_{DD}\\). Using the same source/drain KCL gives\n\n\\[\n\\boxed{\nA_v=\n-\\frac{g_mR_D}\n{1+(g_m+g_{mb})R_S+\\dfrac{R_S+R_D}{r_o}}\n}.\n\\]\n\nIf the body is tied to the source, or body effect is neglected, set \\(g_{mb}=0\\):\n\n\\[\nA_v=\n-\\frac{g_mR_D}\n{1+g_mR_S+\\dfrac{R_S+R_D}{r_o}}.\n\\]\n\nFor \\(R_S=0\\), this reduces to the usual result\n\n\\[\nA_v=-g_m(R_D\\parallel r_o).\n\\]\n\n---\n\n## 5. Input and output resistances\n\nAt low frequency, ignoring gate leakage,\n\n\\[\n\\boxed{R_{in}\\approx\\infty}.\n\\]\n\nLooking into the drain of the transistor/source-degeneration network, with \\(v_{in}=0\\),\n\n\\[\nr_x=r_o\\!\\left[1+(g_m+g_{mb})R_S\\right]+R_S .\n\\]\n\nIncluding \\(R_D\\),\n\n\\[\n\\boxed{R_{out}=R_D\\parallel r_x}.\n\\]\n\nIf \\(r_o\\to\\infty\\), then \\(R_{out}\\approx R_D\\). An external load \\(R_L\\) is included by replacing \\(R_D\\) with \\(R_D\\parallel R_L\\) in the AC expressions.\n\nThus \\(R_S\\) provides negative feedback: it reduces gain, improves linearity and gain stability, and increases the transistor’s intrinsic output resistance.",
        "format": "markdown",
        "sha256": "92e2db7a5377d5e32870799c2beab0723b49f5b21ead351e8f2550b2189ac6c0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain −gm RD/(1 + gm RS). The body-effect and ro refinements are also consistent with the topology.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1235,
        "output_tokens": 27539,
        "total_tokens": 28774,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26418,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1235,
        "output_tokens": 27539,
        "total_tokens": 28774,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26418,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nThe upper terminal of \\(M_1\\) is its source, so \\(M_1\\) is a p-channel MOSFET. The circuit is therefore a **PMOS common-source stage with source degeneration**:\n\n- \\(R_S\\): source degeneration resistor from \\(V_{DD}\\) to the source.\n- \\(R_D\\): drain/load resistor from the output to ground.\n- Input: gate voltage.\n- Output: drain voltage.\n- \\(V_{DD}\\) is an AC ground in small-signal analysis.\n\nIncreasing \\(V_{in}\\) reduces \\(V_{SG}\\), reduces the current, and therefore reduces \\(V_{out}\\). Thus the stage is **inverting**.\n\n---\n\n## 2. DC operation\n\nLet \\(I>0\\) be the current flowing downward from \\(V_{DD}\\), through \\(R_S\\), \\(M_1\\), and \\(R_D\\). Then\n\n\\[\nV_S=V_{DD}-IR_S,\n\\qquad\nV_{out}=V_D=IR_D,\n\\]\n\n\\[\nV_{SG}=V_{DD}-IR_S-V_{in},\n\\]\n\n\\[\nV_{SD}=V_S-V_D\n      =V_{DD}-I(R_S+R_D).\n\\]\n\nIf the pMOS body is tied to \\(V_{DD}\\), then\n\n\\[\nV_{BS}=V_{DD}-V_S=IR_S,\n\\]\n\nso body effect increases \\(|V_{Tp}|\\):\n\n\\[\n|V_{Tp}(I)|=|V_{Tp0}|+\n\\gamma_p\\left[\\sqrt{2|\\phi_F|+IR_S}-\\sqrt{2|\\phi_F|}\\right].\n\\]\n\nIf the body is tied directly to the source, as often implied by a three-terminal MOS symbol, this body-effect term is absent.\n\n### Cutoff\n\nAt \\(I=0\\), \\(V_S=V_{DD}\\), so the device is off when\n\n\\[\nV_{in}\\ge V_{DD}-|V_{Tp0}|.\n\\]\n\nIn cutoff,\n\n\\[\nV_{out}=0.\n\\]\n\n### Saturation\n\nWith channel-length modulation included,\n\n\\[\nI=\\frac{\\beta_p}{2}\n\\left(V_{SG}-|V_{Tp}|\\right)^2\n\\left(1+\\lambda_pV_{SD}\\right),\n\\qquad\n\\beta_p=\\mu_pC_{ox}\\frac WL.\n\\]\n\nEquivalently,\n\n\\[\nI=\\frac{\\beta_p}{2}\n\\left[V_{DD}-IR_S-V_{in}-|V_{Tp}(I)|\\right]^2\n\\left[1+\\lambda_p\\bigl(V_{DD}-I(R_S+R_D)\\bigr)\\right].\n\\]\n\nThis is generally an implicit equation for the bias current.\n\nFor constant threshold and \\(\\lambda=0\\), define\n\n\\[\nA=V_{DD}-V_{in}-|V_{Tp}|.\n\\]\n\nThen, in saturation,\n\n\\[\nI=\\frac{\\beta_p}{2}(A-IR_S)^2.\n\\]\n\nThe overdrive voltage is\n\n\\[\nV_{OV}=A-IR_S\n=\\frac{2A}{1+\\sqrt{1+2\\beta_pR_SA}},\n\\]\n\nand hence\n\n\\[\nI=\\frac{\\beta_p}{2}V_{OV}^2,\n\\qquad\nV_{out}=IR_D.\n\\]\n\n### Saturation/triode boundary\n\nFor a PMOS device,\n\n\\[\nV_{SD}\\ge V_{SG}-|V_{Tp}|.\n\\]\n\nUsing the node voltages gives\n\n\\[\n\\boxed{V_{out}\\le V_{in}+|V_{Tp}|}.\n\\]\n\nFor larger \\(V_{out}\\), \\(M_1\\) enters the triode region, where\n\n\\[\nI=\\beta_p\\left[\n(V_{SG}-|V_{Tp}|)V_{SD}-\\frac{V_{SD}^2}{2}\n\\right].\n\\]\n\nThe absolute maximum output is limited approximately by the resistive divider,\n\n\\[\nV_{out,\\max}<\\frac{V_{DD}R_D}{R_S+R_D}.\n\\]\n\n---\n\n## 3. Small-signal voltage gain\n\nAt the bias point define\n\n\\[\ng_m=\\frac{2I}{V_{OV}}=\\sqrt{2\\beta_p I},\n\\qquad\ng_o=\\frac1{r_o}\\simeq\\lambda_p I,\n\\]\n\nand \\(g_{mb}=\\eta g_m\\) if the body is fixed at \\(V_{DD}\\). If the body is tied to the source or body effect is neglected, take \\(g_{mb}=0\\).\n\nLet \\(i\\) be the incremental downward current. Since both supply rails are AC ground,\n\n\\[\nv_s=-iR_S,\n\\qquad\nv_{out}=iR_D.\n\\]\n\nIf an external load \\(R_L\\) is present, replace \\(R_D\\) everywhere below by\n\n\\[\nR=R_D\\parallel R_L.\n\\]\n\nThe incremental PMOS current is\n\n\\[\ni=g_m(v_s-v_{in})+g_{mb}v_s+g_o(v_s-v_{out}).\n\\]\n\nSubstituting the resistor relations gives\n\n\\[\ni\\left[\n1+(g_m+g_{mb}+g_o)R_S+g_oR\n\\right]\n=-g_m v_{in}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v\\equiv\\frac{v_{out}}{v_{in}}\n=\n-\\frac{g_mR}\n{1+(g_m+g_{mb}+g_o)R_S+g_oR}\n}\n\\]\n\nFor \\(r_o\\gg R,R_S\\),\n\n\\[\n\\boxed{\nA_v\\simeq\n-\\frac{g_mR}{1+(g_m+g_{mb})R_S}\n}\n\\]\n\nand, if body effect is also neglected,\n\n\\[\n\\boxed{\nA_v\\simeq-\\frac{g_mR_D}{1+g_mR_S}\n}.\n\\]\n\nFor strong source degeneration, \\(g_mR_S\\gg1\\),\n\n\\[\nA_v\\approx-\\frac{R_D}{R_S},\n\\]\n\nso the gain is set mainly by the resistor ratio and is relatively insensitive to \\(g_m\\), mobility, threshold voltage, and bias current. With body effect, the limiting value is approximately\n\n\\[\nA_v\\approx-\\frac{R_D}{(1+\\eta)R_S}.\n\\]\n\nThe source and drain small-signal voltages satisfy the useful exact relation\n\n\\[\n\\frac{v_{out}}{v_s}=-\\frac{R_D}{R_S},\n\\]\n\nwhile\n\n\\[\n\\frac{v_s}{v_{in}}\n=\\frac{g_mR_S}\n{1+(g_m+g_{mb}+g_o)R_S+g_oR_D}.\n\\]\n\n---\n\n## 4. Input and output resistance\n\n### Input resistance\n\nAt low frequency, an ideal MOS gate draws no current:\n\n\\[\n\\boxed{R_{in}\\rightarrow\\infty}.\n\\]\n\nAt high frequency, gate capacitances matter. The approximate input capacitance is\n\n\\[\nC_{in}\\simeq\nC_{gb}+C_{gs}\\left(1-\\frac{v_s}{v_{in}}\\right)\n+C_{gd}(1-A_v).\n\\]\n\nSince \\(A_v<0\\), \\(C_{gd}\\) is Miller-multiplied. Since the source follows the gate partially, \\(C_{gs}\\) is bootstrapped and appears smaller.\n\n### Output resistance\n\nLooking into the drain of the transistor alone, source degeneration raises its output resistance to\n\n\\[\n\\boxed{\nr_{out,M}\n=\nr_o\\left[1+(g_m+g_{mb})R_S\\right]+R_S\n}\n\\]\n\nwith \\(g_{mb}=0\\) when the body is tied to the source.\n\nIncluding the physical drain resistor,\n\n\\[\n\\boxed{\nR_{out}=R_D\\parallel r_{out,M}\n}.\n\\]\n\nFor \\(r_o\\rightarrow\\infty\\), this reduces to \\(R_{out}\\simeq R_D\\).\n\n---\n\n## 5. Main qualitative behavior\n\n- The circuit is an **inverting, degenerated common-source amplifier**.\n- \\(R_S\\) provides negative feedback: it reduces gain but improves linearity, stabilizes gain against process and bias variations, and increases the transistor output resistance.\n- \\(R_D\\) converts the drain-current variation into an output voltage.\n- As \\(V_{in}\\) rises toward \\(V_{DD}\\), the PMOS turns off and \\(V_{out}\\rightarrow0\\).\n- As \\(V_{in}\\) falls, current and \\(V_{out}\\) rise until the transistor leaves saturation.\n- If supply ripple is considered, with the body/top rail tracking \\(V_{DD}\\) and the gate held fixed relative to ground,\n\n\\[\n\\frac{v_{out}}{v_{DD}}\n=\n\\frac{(g_m+g_o)R_D}\n{1+(g_m+g_{mb}+g_o)R_S+g_oR_D},\n\\]\n\nindicating substantial supply coupling unless the input signal also tracks the supply or the supply is well regulated.",
        "format": "markdown",
        "sha256": "6dbba58a7943174b972ae7cfdc48150fa901dad66d138dac6f30505d72baa0fe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS); the body-effect and finite-ro refinements are consistent.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1235,
        "output_tokens": 29799,
        "total_tokens": 31034,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28033,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1152,
        "input_tokens": 1235,
        "output_tokens": 29799,
        "total_tokens": 31034,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28033,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an enhancement-mode NMOS, the lower arrowed terminal is the source. Thus the circuit is a **common-drain amplifier**, or **NMOS source follower**. The supply \\(V_{DD}\\) is an AC ground.\n\nLet\n\n\\[\n\\beta_n=\\mu_n C_{\\mathrm{ox}}\\frac WL,\\qquad\nI_D=\\frac{\\beta_n}{2}V_{OV}^2,\\qquad\nV_{OV}=V_{GS}-V_T .\n\\]\n\n## 1. DC transfer characteristic\n\nSince the gate draws essentially no current,\n\n\\[\nI_D=I_{R_S}=\\frac{V_{\\text{out}}}{R_S}.\n\\]\n\n### Cutoff\n\nFor\n\n\\[\nV_{\\text{in}}\\le V_{T0},\n\\]\n\nthe transistor is off and\n\n\\[\n\\boxed{V_{\\text{out}}=0}.\n\\]\n\n### Saturation\n\nIgnoring channel-length modulation and body effect initially,\n\n\\[\nV_{OV}=V_{\\text{in}}-V_{\\text{out}}-V_T\n\\]\n\nand therefore\n\n\\[\n\\boxed{\\frac{V_{\\text{out}}}{R_S}\n=\\frac{\\beta_n}{2}\n\\left(V_{\\text{in}}-V_{\\text{out}}-V_T\\right)^2 }.\n\\]\n\nEquivalently,\n\n\\[\n\\boxed{\nV_{\\text{in}}\n=V_T+V_{\\text{out}}\n+\\sqrt{\\frac{2V_{\\text{out}}}{\\beta_nR_S}}\n}.\n\\]\n\nThus the output is level-shifted below the input by approximately \\(V_T+V_{OV}\\).\n\nFor \\(x=V_{\\text{in}}-V_T\\ge0\\), the explicit solution is\n\n\\[\nV_{\\text{out}}\n=x+\\frac{1}{\\beta_nR_S}\n-\\sqrt{\\frac{2x}{\\beta_nR_S}\n+\\frac{1}{\\beta_n^2R_S^2}}.\n\\]\n\nThe saturation condition is\n\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\quad\\Longrightarrow\\quad\nV_{\\text{in}}\\le V_{DD}+V_T,\n\\]\n\nso for the usual \\(0\\le V_{\\text{in}}\\le V_{DD}\\), the device is normally saturated.\n\nIf \\(V_{\\text{in}}>V_{DD}+V_T\\), \\(M_1\\) enters the triode region and\n\n\\[\n\\frac{V_{\\text{out}}}{R_S}\n=\n\\beta_n\\left[\n(V_{\\text{in}}-V_{\\text{out}}-V_T)(V_{DD}-V_{\\text{out}})\n-\\frac{(V_{DD}-V_{\\text{out}})^2}{2}\n\\right].\n\\]\n\nPhysically, \\(0\\le V_{\\text{out}}<V_{DD}\\).\n\n---\n\n## 2. Small-signal voltage gain\n\nAt the bias point,\n\n\\[\ng_m=\\beta_nV_{OV}\n=\\sqrt{2\\beta_n I_D}\n=\\frac{2I_D}{V_{OV}},\n\\qquad\ng_o=\\frac1{r_o}\\approx\\lambda I_D.\n\\]\n\nFor an integrated NMOS whose body is tied to ground, body effect gives an additional transconductance \\(g_{mb}\\). The source-node KCL is\n\n\\[\ng_m(v_{\\text{in}}-v_{\\text{out}})\n-g_{mb}v_{\\text{out}}\n-g_ov_{\\text{out}}\n=\\frac{v_{\\text{out}}}{R_S}.\n\\]\n\nHence\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n\\frac{g_m}\n{g_m+g_{mb}+g_o+1/R_S}\n}\n\\]\n\nor\n\n\\[\nA_v=\n\\frac{g_mR_S}\n{1+(g_m+g_{mb}+g_o)R_S}.\n\\]\n\nIf body effect and channel-length modulation are neglected,\n\n\\[\n\\boxed{\nA_v=\\frac{g_mR_S}{1+g_mR_S}\n=\\frac{R_S}{R_S+1/g_m}\n}.\n\\]\n\nTherefore \\(0<A_v<1\\), with no phase inversion. For \\(g_mR_S\\gg1\\), \\(A_v\\approx1\\): the circuit acts as a voltage buffer.\n\n### Body effect\n\nIf the substrate is fixed at ground while the source is at \\(V_{\\text{out}}\\),\n\n\\[\nV_T(V_{\\text{out}})\n=\nV_{T0}+\\gamma\\left[\n\\sqrt{2\\phi_F+V_{\\text{out}}}\n-\\sqrt{2\\phi_F}\n\\right],\n\\]\n\nand \\(g_{mb}\\neq0\\). Body effect lowers the gain. If the body is tied to the source, as often assumed for a discrete three-terminal MOSFET, take \\(g_{mb}=0\\).\n\n---\n\n## 3. Input and output resistances\n\nAt low frequency, the MOS gate draws no current:\n\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty}.\n\\]\n\nWith the input voltage source set to zero, the output resistance including \\(R_S\\) is\n\n\\[\n\\boxed{\nR_{\\text{out}}\n=\n\\frac{1}{g_m+g_{mb}+g_o+1/R_S}\n=\n\\left(\\frac{1}{g_m+g_{mb}+g_o}\\right)\\parallel R_S\n}.\n\\]\n\nFor \\(g_{mb}=0\\) and \\(r_o\\to\\infty\\),\n\n\\[\n\\boxed{\nR_{\\text{out}}=\\frac1{g_m}\\parallel R_S\n=\\frac{R_S}{1+g_mR_S}\n}.\n\\]\n\nIf an external load \\(R_L\\) is connected, replace \\(1/R_S\\) by \\(1/R_S+1/R_L\\) in the small-signal expressions.\n\nThus the circuit provides a noninverting gain slightly below unity, a high input resistance, a relatively low output resistance, and a DC level shift of approximately \\(V_T+V_{OV}\\).",
        "format": "markdown",
        "sha256": "2e962bc877c6ad2954d1ea38db87d79dbe7bc490a94003deacf7641aab6f2d95"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS source follower and gives its positive, less-than-unity gain, including the standard ideal expression. The additional body-effect and output-resistance analysis is consistent.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 976,
        "output_tokens": 18844,
        "total_tokens": 19820,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 976,
        "output_tokens": 18844,
        "total_tokens": 19820,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an enhancement-mode NMOS and \\(V_{DD}\\) is an ideal, bypassed supply, this is an **NMOS common-drain amplifier**, or **source follower**. The drain is at AC ground, the input is applied to the gate, and the output is taken from the source.\n\n## 1. DC / large-signal operation\n\nLet\n\n\\[\n\\beta_n=\\mu_n C_{\\rm ox}\\frac{W}{L},\\qquad\nV_{GS}=V_{\\rm in}-V_{\\rm out},\\qquad\nV_{DS}=V_{DD}-V_{\\rm out}.\n\\]\n\nWith no external load,\n\n\\[\nI_D=\\frac{V_{\\rm out}}{R_S}.\n\\]\n\nFor saturation, including channel-length modulation and body effect,\n\n\\[\n\\boxed{\n\\frac{V_{\\rm out}}{R_S}\n=\n\\frac{\\beta_n}{2}\n\\left[V_{\\rm in}-V_{\\rm out}-V_T(V_{\\rm out})\\right]^2\n\\left[1+\\lambda(V_{DD}-V_{\\rm out})\\right]\n}\n\\]\n\nwhere, if the body is tied to ground,\n\n\\[\nV_T(V_{\\rm out})\n=\nV_{T0}+\\gamma\\left[\n\\sqrt{2\\phi_F+V_{\\rm out}}-\\sqrt{2\\phi_F}\n\\right].\n\\]\n\nIf the body is tied to the source, \\(V_T=V_{T0}\\) and there is no body effect.\n\n### Simple square-law result\n\nIgnoring \\(\\lambda\\) and body effect,\n\n\\[\n\\frac{V_{\\rm out}}{R_S}\n=\n\\frac{\\beta_n}{2}\n\\left(V_{\\rm in}-V_{\\rm out}-V_{T0}\\right)^2 .\n\\]\n\nThus\n\n\\[\n\\boxed{\nV_{\\rm in}\n=\nV_{\\rm out}+V_{T0}\n+\\sqrt{\\frac{2V_{\\rm out}}{\\beta_nR_S}}\n}\n\\]\n\nor equivalently,\n\n\\[\nV_{\\rm out}\n=\nV_{\\rm in}-V_{T0}-V_{OV},\n\\qquad\nV_{OV}=\\sqrt{\\frac{2V_{\\rm out}}{\\beta_nR_S}}.\n\\]\n\nHence the output follows the input with a positive level shift of approximately one \\(V_{GS}\\).\n\nAn explicit solution is\n\n\\[\nV_{\\rm out}\n=\n\\frac14\\left[\n\\sqrt{a^2+4(V_{\\rm in}-V_{T0})}-a\n\\right]^2,\n\\qquad\na=\\sqrt{\\frac{2}{\\beta_nR_S}},\n\\]\n\nvalid for \\(V_{\\rm in}>V_{T0}\\). For \\(V_{\\rm in}\\le V_{T0}\\), \\(M_1\\) is off and \\(R_S\\) pulls the output to zero:\n\n\\[\nV_{\\rm out}=0.\n\\]\n\n### Operating-region condition\n\nSaturation requires\n\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\]\n\nwhich gives\n\n\\[\n\\boxed{V_{\\rm in}\\le V_{DD}+V_T(V_{\\rm out})}.\n\\]\n\nFor the usual range \\(0\\le V_{\\rm in}\\le V_{DD}\\), this is normally satisfied whenever the transistor is on. Triode operation occurs only if the gate is driven above \\(V_{DD}\\) by more than roughly one threshold voltage.\n\nThe upper output swing is therefore limited approximately to\n\n\\[\nV_{\\rm out,max}\\approx V_{DD}-V_T-V_{OV},\n\\]\n\nwith body effect reducing it further.\n\n---\n\n## 2. Small-signal voltage gain\n\nAt the bias point define\n\n\\[\ng_m=\\beta_nV_{OV}=\\frac{2I_D}{V_{OV}},\n\\qquad\ng_o=\\frac1{r_o}\\approx \\lambda I_D,\n\\]\n\nand \\(g_{mb}\\) as the body-effect transconductance. Let\n\n\\[\nG_S=\\frac1{R_S}\n\\]\n\nor, with a load \\(R_L\\),\n\n\\[\nG_S=\\frac1{R_S}+\\frac1{R_L}.\n\\]\n\nSince \\(V_{DD}\\), the drain, and normally the body are at AC ground,\n\n\\[\ni_d=g_m(v_{\\rm in}-v_{\\rm out})\n-(g_{mb}+g_o)v_{\\rm out}.\n\\]\n\nKCL at the source gives\n\n\\[\nG_Sv_{\\rm out}=i_d,\n\\]\n\nand therefore\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\rm out}}{v_{\\rm in}}\n=\n\\frac{g_m}\n{g_m+g_{mb}+g_o+G_S}\n}\n\\]\n\nThis gain is positive and always less than one.\n\n### Common simplifications\n\nIf body effect and \\(r_o\\) are neglected,\n\n\\[\n\\boxed{\nA_v=\\frac{g_mR_S}{1+g_mR_S}\n\\approx 1-\\frac{1}{g_mR_S}\n}\n\\]\n\nfor \\(g_mR_S\\gg1\\).\n\nIf only \\(r_o\\) is included,\n\n\\[\nA_v=\n\\frac{g_m(R_S\\parallel r_o)}\n{1+g_m(R_S\\parallel r_o)}.\n\\]\n\nWith body effect,\n\n\\[\nA_v=\n\\frac{g_m\\left(R_S\\parallel r_o\\parallel 1/g_{mb}\\right)}\n{1+g_m\\left(R_S\\parallel r_o\\parallel 1/g_{mb}\\right)}.\n\\]\n\nBody effect and finite \\(r_o\\) both reduce the gain below the ideal source-follower value.\n\n---\n\n## 3. Input and output resistance\n\n### Input resistance\n\nAt DC, the MOS gate draws essentially no current:\n\n\\[\n\\boxed{R_{\\rm in}\\approx\\infty}.\n\\]\n\nThus any external gate bias network normally determines the actual input resistance.\n\nAt high frequency, the effective input capacitance is approximately\n\n\\[\nC_{\\rm in}\\approx C_{gd}+C_{gs}(1-A_v),\n\\]\n\nso \\(C_{gs}\\) is “bootstrapped” because \\(A_v\\approx1\\). Since the drain is at AC ground, \\(C_{gd}\\) is not Miller-multiplied. This gives the source follower relatively wide bandwidth.\n\n### Output resistance\n\nSet \\(v_{\\rm in}=0\\), remove any external load, and apply a test voltage at the output:\n\n\\[\n\\boxed{\nR_{\\rm out}\n=\n\\frac{1}\n{g_m+g_{mb}+g_o+1/R_S}\n=\n\\frac1{g_m}\\parallel\\frac1{g_{mb}}\\parallel r_o\\parallel R_S\n}\n\\]\n\nFor the simplest model,\n\n\\[\n\\boxed{\nR_{\\rm out}\\approx R_S\\parallel\\frac1{g_m}\\approx\\frac1{g_m}.\n}\n\\]\n\n## Conclusion\n\nThe circuit is a noninverting source-follower/buffer:\n\n- \\(V_{\\rm out}\\approx V_{\\rm in}-V_{GS}\\),\n- \\(0<A_v<1\\), typically close to unity,\n- very high input resistance,\n- low output resistance \\(\\sim1/g_m\\),\n- static current \\(I_D=V_{\\rm out}/R_S\\),\n- reduced gain and output swing due to finite \\(R_S\\), \\(r_o\\), and body effect.",
        "format": "markdown",
        "sha256": "1c1367d77b425d211426de68ba8aa8d7523f808486e746b5c120f6a96c317ad7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain as gmRS/(1 + gmRS), satisfying the full-credit rule. The additional analysis is consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 976,
        "output_tokens": 17480,
        "total_tokens": 18456,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16051,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 976,
        "output_tokens": 17480,
        "total_tokens": 18456,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16051,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS source follower**, also called a **common-drain stage**. The drain is tied to \\(V_{DD}\\), the input is applied to the gate, and the output is taken from the source. The resistor \\(R_S\\) provides dc bias and pulls the source toward ground.\n\nAssume an enhancement NMOS with\n\n\\[\n\\beta=\\mu_n C_{ox}\\frac{W}{L},\\qquad V_{OV}=V_{GS}-V_T\n\\]\n\nand let\n\n\\[\nV_{GS}=V_{in}-V_{out},\\qquad V_{DS}=V_{DD}-V_{out}.\n\\]\n\nFor an unloaded output,\n\n\\[\nI_D=\\frac{V_{out}}{R_S}.\n\\]\n\n---\n\n## 1. DC / large-signal behavior\n\n### Cutoff region\n\nIf the source is pulled to ground and\n\n\\[\nV_{in}\\le V_{T0},\n\\]\n\nthen \\(M_1\\) is off, so\n\n\\[\nI_D=0,\\qquad V_{out}=0.\n\\]\n\nThus the output remains at ground until the input exceeds the threshold.\n\n---\n\n### Saturation region\n\nFor normal input range \\(0\\le V_{in}\\le V_{DD}\\), an NMOS source follower is usually in saturation because\n\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\]\n\nbecomes\n\n\\[\nV_{DD}-V_{out}\\ge V_{in}-V_{out}-V_T\n\\]\n\nor\n\n\\[\nV_{in}\\le V_{DD}+V_T,\n\\]\n\nwhich is satisfied for normal rail-limited inputs.\n\nIgnoring channel-length modulation,\n\n\\[\nI_D=\\frac{\\beta}{2}\\left(V_{in}-V_{out}-V_T\\right)^2.\n\\]\n\nSince \\(I_D=V_{out}/R_S\\),\n\n\\[\n\\boxed{\\frac{V_{out}}{R_S}\n=\\frac{\\beta}{2}\\left(V_{in}-V_{out}-V_T\\right)^2}\n\\]\n\nor equivalently\n\n\\[\n\\boxed{V_{out}=V_{in}-V_T-\\sqrt{\\frac{2V_{out}}{\\beta R_S}} }.\n\\]\n\nSo the output follows the input but is lower by roughly \\(V_{GS}=V_T+V_{OV}\\).\n\nIf body effect is neglected, define\n\n\\[\n\\Delta=V_{in}-V_T>0.\n\\]\n\nThen the physical solution is\n\n\\[\n\\boxed{\nV_{out}\n=\n\\Delta+\\frac{1-\\sqrt{1+2\\beta R_S\\Delta}}{\\beta R_S}\n}\n\\]\n\nwith \\(V_{out}=0\\) for \\(V_{in}\\le V_T\\).\n\nFor an integrated NMOS whose body is tied to ground, body effect should be included:\n\n\\[\nV_T(V_{out})\n=\nV_{T0}\n+\\gamma\\left[\n\\sqrt{|2\\phi_F|+V_{out}}\n-\\sqrt{|2\\phi_F|}\n\\right].\n\\]\n\nThen the dc equation becomes implicit:\n\n\\[\n\\boxed{\n\\frac{V_{out}}{R_S}\n=\n\\frac{\\beta}{2}\n\\left[\nV_{in}-V_{out}-V_T(V_{out})\n\\right]^2\n}\n\\]\n\nand is usually solved numerically or iteratively.\n\n---\n\n### Triode region\n\nIf \\(V_{in}\\) is driven above roughly \\(V_{DD}+V_T\\), then\n\n\\[\nV_{DS}<V_{GS}-V_T\n\\]\n\nand \\(M_1\\) enters triode. With body effect and channel-length modulation neglected,\n\n\\[\n\\frac{V_{out}}{R_S}\n=\n\\beta\\left[\n\\left(V_{in}-V_{out}-V_T\\right)\n\\left(V_{DD}-V_{out}\\right)\n-\\frac{1}{2}\\left(V_{DD}-V_{out}\\right)^2\n\\right].\n\\]\n\nFor ordinary \\(V_{in}\\le V_{DD}\\), this region is usually not reached.\n\n---\n\n## 2. Small-signal voltage gain\n\nFor small signal analysis, \\(V_{DD}\\) is ac ground. Let the bias point be \\(V_{in,Q},V_{out,Q}\\), with\n\n\\[\nI_{D,Q}=\\frac{V_{out,Q}}{R_S}.\n\\]\n\nDefine\n\n\\[\ng_m \\approx \\sqrt{2\\beta I_{D,Q}}\n=\\frac{2I_{D,Q}}{V_{OV,Q}},\n\\]\n\n\\[\ng_o=\\frac{1}{r_o}\\approx \\lambda I_{D,Q},\n\\]\n\nand, if the body is at ac ground,\n\n\\[\ng_{mb}=\\eta g_m,\n\\]\n\nwhere \\(\\eta\\) is the body-effect factor. If the body is tied to the source or body effect is neglected, set \\(g_{mb}=0\\).\n\nWith \\(r_o\\) included, the effective resistance from the source node to ac ground is\n\n\\[\nR' = R_S \\parallel r_o.\n\\]\n\nIf an external resistive load \\(R_L\\) is present, use\n\n\\[\nR'=R_S\\parallel R_L\\parallel r_o.\n\\]\n\nKCL at the source gives\n\n\\[\ng_m(v_{in}-v_{out})-g_{mb}v_{out}\n=\n\\frac{v_{out}}{R'}.\n\\]\n\nTherefore\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m R'}{1+(g_m+g_{mb})R'}\n}\n\\]\n\nor equivalently\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m}{g_m+g_{mb}+g_o+1/R_S}\n}.\n\\]\n\nSpecial cases:\n\n- Neglect body effect and \\(r_o\\):\n\n\\[\n\\boxed{\nA_v=\\frac{g_m R_S}{1+g_m R_S}\n}\n\\]\n\nso for \\(g_mR_S\\gg1\\),\n\n\\[\nA_v\\approx 1.\n\\]\n\n- With body effect but \\(r_o\\to\\infty\\):\n\n\\[\nA_v=\\frac{g_m R_S}{1+(g_m+g_{mb})R_S}<1.\n\\]\n\nBody effect reduces the gain because as \\(V_{out}\\) rises, \\(V_{SB}\\) rises and \\(V_T\\) increases.\n\n---\n\n## 3. Input and output resistance\n\nAt low frequency, the MOS gate draws essentially no current, so\n\n\\[\n\\boxed{R_{in}\\approx \\infty.}\n\\]\n\nWith the input held at ac ground, the source node sees a conductance approximately\n\n\\[\ng_m+g_{mb}+g_o\n\\]\n\nfrom the transistor. Thus the source-follower output resistance excluding \\(R_S\\) is\n\n\\[\n\\boxed{\nr_{out,\\text{core}}\n\\approx\n\\frac{1}{g_m+g_{mb}+g_o}\n\\approx\n\\frac{1}{g_m+g_{mb}}\n}.\n\\]\n\nIncluding the physical resistor \\(R_S\\),\n\n\\[\n\\boxed{\nR_{out}\n=\n\\frac{1}{g_m+g_{mb}+g_o+1/R_S}\n=\nr_{out,\\text{core}}\\parallel R_S\n}.\n\\]\n\nIf \\(r_o\\) is large and body effect is ignored,\n\n\\[\nR_{out}\\approx \\frac{1}{g_m}\\parallel R_S\\approx \\frac{1}{g_m}.\n\\]\n\n---\n\n## 4. Main qualitative results\n\n- The circuit is a **non-inverting source follower**.\n- The voltage gain is positive but less than unity:\n\n\\[\n0<A_v<1.\n\\]\n\n- The output is level-shifted downward:\n\n\\[\nV_{out}\\approx V_{in}-V_{GS}\n=V_{in}-V_T-V_{OV}.\n\\]\n\n- Lower output limit is approximately \\(0\\).\n- Upper output is limited by the required \\(V_{GS}\\); for \\(V_{in}\\approx V_{DD}\\),\n\n\\[\nV_{out}\\approx V_{DD}-V_{GS}.\n\\]\n\n- The circuit has high input resistance and low output resistance, so it is useful as a **buffer/level shifter**.\n- It can actively source current through \\(M_1\\), but the falling output transition is mainly provided by \\(R_S\\), so large capacitive loads may discharge slowly.",
        "format": "markdown",
        "sha256": "c06ca5a4a45e4243b7446aeb9b2398587cb32c2586b3b21de477e9b239ea7b64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain as gm·RS/(1 + gm·RS), satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 976,
        "output_tokens": 26596,
        "total_tokens": 27572,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24965,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 976,
        "output_tokens": 26596,
        "total_tokens": 27572,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24965,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming an ideal \\(V_{DD}\\) supply, no output load, and interpreting the source arrow as an \\(n\\)-channel MOSFET, the terminals are\n\n\\[\nV_G=V_{DD},\\qquad V_S=V_{\\text{in}},\\qquad V_D=V_{\\text{out}} .\n\\]\n\nThus this is a **common-gate NMOS stage**: \\(V_{DD}\\) is ac ground, the input is applied to the source, and the output is taken from the drain.\n\nLet\n\n\\[\n\\beta_n=\\mu_n C_{\\rm ox}\\frac WL,\\qquad\nV_{OV}=V_{GS}-V_{TH}=V_{DD}-V_{\\text{in}}-V_{TH},\n\\]\n\nand neglect channel-length modulation initially. KCL at the drain gives\n\n\\[\nI_D=\\frac{V_{DD}-V_{\\text{out}}}{R_D}.\n\\]\n\n## 1. Large-signal operation\n\n### Cutoff\n\nIf\n\n\\[\nV_{\\text{in}}\\ge V_{DD}-V_{TH},\n\\]\n\nthen \\(V_{GS}\\le V_{TH}\\), so\n\n\\[\nI_D=0,\\qquad V_{\\text{out}}=V_{DD}.\n\\]\n\n### Saturation\n\nFor \\(V_{OV}>0\\), saturation requires\n\n\\[\nV_{DS}\\ge V_{GS}-V_{TH}.\n\\]\n\nSince \\(V_{DS}=V_{\\text{out}}-V_{\\text{in}}\\),\n\n\\[\nV_{\\text{out}}-V_{\\text{in}}\\ge V_{DD}-V_{\\text{in}}-V_{TH}\n\\]\n\nor\n\n\\[\n\\boxed{V_{\\text{out}}\\ge V_{DD}-V_{TH}}.\n\\]\n\nEquivalently,\n\n\\[\n\\boxed{I_D R_D\\le V_{TH}}.\n\\]\n\nIn saturation,\n\n\\[\nI_D=\\frac{\\beta_n}{2}\n\\left(V_{DD}-V_{\\text{in}}-V_{TH}\\right)^2,\n\\]\n\nhence\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}\n-\\frac{\\beta_nR_D}{2}\n\\left(V_{DD}-V_{TH}-V_{\\text{in}}\\right)^2\n}.\n\\]\n\nThe input range for saturation is therefore\n\n\\[\n\\boxed{\nV_{DD}-V_{TH}\n-\\sqrt{\\frac{2V_{TH}}{\\beta_nR_D}}\n\\le V_{\\text{in}}\n<\nV_{DD}-V_{TH}\n}.\n\\]\n\nAn important limitation is that the quiescent output can fall by at most \\(V_{TH}\\) below \\(V_{DD}\\) while remaining in saturation.\n\n### Triode region\n\nFor lower \\(V_{\\text{in}}\\), the transistor enters triode. The transfer characteristic is then determined by\n\n\\[\n\\boxed{\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n=\n\\beta_n\\left[\nV_{OV}(V_{\\text{out}}-V_{\\text{in}})\n-\\frac{(V_{\\text{out}}-V_{\\text{in}})^2}{2}\n\\right]\n}.\n\\]\n\nFor a compact closed form, define\n\n\\[\nx=V_{DD}-V_{\\text{out}},\\qquad a=\\beta_nR_D.\n\\]\n\nThen\n\n\\[\n\\frac{2x}{a}=V_{OV}^2-(V_{TH}-x)^2,\n\\]\n\nand the root continuous with the saturation solution is\n\n\\[\nx=\nV_{TH}-\\frac1a+\n\\sqrt{\nV_{OV}^2-\\frac{2V_{TH}}{a}+\\frac1{a^2}\n}.\n\\]\n\nThus \\(V_{\\text{out}}\\) rises with \\(V_{\\text{in}}\\), reaches saturation-region behavior, and finally flattens at \\(V_{DD}\\) in cutoff.\n\n## 2. Small-signal voltage gain\n\nChoose a saturation bias point\n\n\\[\nV_{OVQ}=V_{DD}-V_{\\text{in}Q}-V_{TH},\n\\]\n\nwith\n\n\\[\nI_{DQ}=\\frac{\\beta_n}{2}V_{OVQ}^2,\\qquad\nV_{\\text{out}Q}=V_{DD}-I_{DQ}R_D.\n\\]\n\nThe transconductance is\n\n\\[\ng_m=\\beta_nV_{OVQ}\n=\\frac{2I_{DQ}}{V_{OVQ}}.\n\\]\n\nBecause the gate is at ac ground,\n\n\\[\nv_{gs}=-v_{\\text{in}}.\n\\]\n\nTherefore, when \\(r_o\\) is neglected,\n\n\\[\ni_d=-g_m v_{\\text{in}},\n\\qquad\nv_{\\text{out}}=-i_dR_D,\n\\]\n\nso\n\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{v_{\\text{in}}}=+g_mR_D}.\n\\]\n\nThe gain is **positive, i.e. noninverting**:\n\n- \\(V_{\\text{in}}\\) increases \\(\\rightarrow V_{GS}\\) decreases;\n- \\(I_D\\) decreases;\n- the drop across \\(R_D\\) decreases;\n- \\(V_{\\text{out}}\\) increases.\n\nThis also follows by differentiating the saturation transfer equation:\n\n\\[\n\\frac{dV_{\\text{out}}}{dV_{\\text{in}}}\n=\\beta_nR_DV_{OV}=g_mR_D.\n\\]\n\nThe saturation constraint gives\n\n\\[\ng_mR_D\\le \\sqrt{2\\beta_nR_DV_{TH}}.\n\\]\n\n### Including body effect and \\(r_o\\)\n\nIf the body is fixed rather than tied to the source, body effect adds \\(g_{mb}\\). With \\(g_o=1/r_o\\),\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m+g_{mb}+g_o}\n{R_D^{-1}+g_o}\n=\n(g_m+g_{mb}+g_o)(R_D\\parallel r_o)\n}\n\\]\n\nand commonly\n\n\\[\nA_v\\approx(g_m+g_{mb})(R_D\\parallel r_o).\n\\]\n\nIf the body is tied to the source, \\(g_{mb}=0\\); if also \\(r_o\\gg R_D\\),\n\n\\[\nA_v\\approx g_mR_D.\n\\]\n\n## 3. Terminal resistances\n\nWith an ideal input voltage source and the input set to zero for output-resistance calculation,\n\n\\[\n\\boxed{R_{\\text{out}}\\approx R_D\\parallel r_o}.\n\\]\n\nThe source input resistance is low, as expected for a common-gate stage:\n\n\\[\n\\boxed{R_{\\text{in}}\\approx \\frac{1}{g_m+g_{mb}}}\n\\]\n\nor, retaining finite \\(r_o\\),\n\n\\[\nR_{\\text{in}}\n=\n\\frac{r_o+R_D}{1+(g_m+g_{mb})r_o}.\n\\]\n\nIf body effect is absent, \\(R_{\\text{in}}\\approx1/g_m\\).\n\nHence the circuit is a low-input-resistance, noninverting common-gate amplifier, but it requires a carefully chosen DC input bias and has only about \\(V_{TH}\\) of downward output headroom in saturation. If \\(M_1\\) is interpreted instead as a pMOS with \\(V_G=V_{DD}\\) and \\(V_{\\text{in}}\\le V_{DD}\\), it would simply be off and \\(V_{\\text{out}}=V_{DD}\\).",
        "format": "markdown",
        "sha256": "4b92c7c58ad393ddf5859e72d9ae46521bb2bee91bb4c836e942df920010a971"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate stage, gives the noninverting gain (+gmRD, with output resistance included), and recognizes the low input resistance (approximately 1/gm). The additional analysis is consistent with its stated modeling assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 941,
        "output_tokens": 29224,
        "total_tokens": 30165,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27802,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 941,
        "output_tokens": 29224,
        "total_tokens": 30165,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27802,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### 1. Circuit identification\n\nUsing the usual MOS symbol, \\(M_1\\) is an NMOS transistor:\n\n- Gate \\(\\rightarrow V_{DD}\\)\n- Source \\(\\rightarrow V_{\\text{in}}\\)\n- Drain \\(\\rightarrow V_{\\text{out}}\\)\n- \\(R_D\\) connects the drain to \\(V_{DD}\\)\n\nThus this is a **common-gate stage**, with \\(V_{DD}\\) acting as AC ground. The input voltage source must also provide the DC path for the transistor current.\n\nAn increase in \\(V_{\\text{in}}\\) reduces \\(V_{GS}\\), reduces \\(I_D\\), and therefore reduces the voltage drop across \\(R_D\\). Consequently \\(V_{\\text{out}}\\) increases: the stage is **non-inverting**.\n\n---\n\n### 2. DC operation\n\nThe terminal voltages are\n\n\\[\nV_{GS}=V_{DD}-V_{\\text{in}},\n\\qquad\nV_{DS}=V_{\\text{out}}-V_{\\text{in}},\n\\qquad\nI_D=\\frac{V_{DD}-V_{\\text{out}}}{R_D}.\n\\]\n\nIf the body is at ground, body effect gives\n\n\\[\nV_T=V_{T0}+\\gamma\\left(\\sqrt{2\\phi_F+V_{\\text{in}}}\n-\\sqrt{2\\phi_F}\\right).\n\\]\n\nIf body effect is neglected, \\(V_T\\) is constant. Define\n\n\\[\nV_{OV}=V_{DD}-V_{\\text{in}}-V_T.\n\\]\n\n#### Cutoff\n\n\\[\nV_{OV}\\le 0\n\\quad\\Longrightarrow\\quad\nV_{\\text{in}}\\gtrsim V_{DD}-V_T.\n\\]\n\nThen \\(I_D=0\\) and\n\n\\[\n\\boxed{V_{\\text{out}}=V_{DD}}.\n\\]\n\n#### Saturation\n\nIgnoring channel-length modulation,\n\n\\[\nI_D\\simeq \\frac{k_n}{2}V_{OV}^{\\,2},\n\\qquad\nk_n=\\mu_n C_{\\text{ox}}\\frac WL,\n\\]\n\nand hence\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}\n-\n\\frac{k_nR_D}{2}\n\\left(V_{DD}-V_{\\text{in}}-V_T\\right)^2\n}.\n\\]\n\nThe saturation condition is\n\n\\[\nV_{DS}\\ge V_{OV}\n\\]\n\nwhich, since \\(V_G=V_{DD}\\), reduces to\n\n\\[\n\\boxed{V_{\\text{out}}\\ge V_{DD}-V_T}\n\\]\n\nor equivalently\n\n\\[\n\\boxed{I_DR_D\\le V_T}.\n\\]\n\nThus the output can fall by at most approximately \\(V_T\\) below \\(V_{DD}\\) while the transistor remains saturated.\n\nFor constant \\(V_T\\), the lower edge of the saturation input range is found from \\(I_DR_D=V_T\\):\n\n\\[\nV_{\\text{in,tri}}\n=\nV_{DD}-V_T\n-\n\\sqrt{\\frac{2V_T}{k_nR_D}}.\n\\]\n\nFor lower \\(V_{\\text{in}}\\), the transistor enters triode. The output is then determined by\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n=\nk_n\\left[\n(V_{DD}-V_{\\text{in}}-V_T)(V_{\\text{out}}-V_{\\text{in}})\n-\\frac{(V_{\\text{out}}-V_{\\text{in}})^2}{2}\n\\right].\n\\]\n\nIn very strong conduction, \\(M_1\\) behaves like a small resistance and \\(V_{\\text{out}}\\) approaches \\(V_{\\text{in}}\\).\n\n---\n\n### 3. Small-signal voltage gain\n\nFor small signals, \\(V_{DD}\\), the gate, and the top of \\(R_D\\) are AC ground. Let\n\n\\[\nG=\n\\begin{cases}\ng_m, & \\text{body tied to source or body effect neglected},\\\\[2mm]\ng_m+g_{mb}, & \\text{body at AC ground}.\n\\end{cases}\n\\]\n\nSince \\(v_{gs}=v_{bs}=-v_{\\text{in}}\\), drain-node KCL including \\(r_o\\) is\n\n\\[\n\\frac{v_{\\text{out}}}{R_D}\n+\n\\frac{v_{\\text{out}}-v_{\\text{in}}}{r_o}\n-\nGv_{\\text{in}}=0.\n\\]\n\nTherefore\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n\\frac{(G+1/r_o)R_D}{1+R_D/r_o}\n=\n(G+g_o)(R_D\\parallel r_o)\n}\n\\]\n\nwith \\(g_o=1/r_o\\).\n\nUseful approximations are\n\n\\[\n\\boxed{A_v\\simeq (g_m+g_{mb})(R_D\\parallel r_o)}\n\\]\n\nand, if \\(r_o\\gg R_D\\),\n\n\\[\n\\boxed{A_v\\simeq (g_m+g_{mb})R_D}.\n\\]\n\nWith both body effect and channel-length modulation neglected,\n\n\\[\n\\boxed{A_v\\simeq g_mR_D>0}.\n\\]\n\nThis agrees with the large-signal saturation expression:\n\n\\[\n\\frac{dV_{\\text{out}}}{dV_{\\text{in}}}\n=\nk_nR_D(V_{DD}-V_{\\text{in}}-V_T)\n=\ng_mR_D.\n\\]\n\n---\n\n### 4. Input and output resistances\n\nThe common-gate input resistance is low:\n\n\\[\n\\boxed{R_{\\text{in}}\\simeq \\frac{1}{g_m+g_{mb}}}\n\\]\n\nor, including \\(r_o\\),\n\n\\[\nR_{\\text{in}}\n=\n\\frac{R_D+r_o}{1+(g_m+g_{mb})r_o}.\n\\]\n\nWith an ideal input voltage source set to zero for output-resistance calculation,\n\n\\[\n\\boxed{R_{\\text{out}}\\simeq R_D\\parallel r_o}\n\\]\n\nand \\(R_{\\text{out}}\\approx R_D\\) if \\(r_o\\) is neglected.\n\n### Main conclusions\n\n- The circuit is a **non-inverting common-gate amplifier**.\n- Its ideal gain is approximately \\(g_mR_D\\), or \\((g_m+g_{mb})R_D\\) with body effect.\n- The input source sees a low resistance and must sink the DC drain current.\n- Cutoff gives \\(V_{\\text{out}}=V_{DD}\\); excessive drain current drives \\(M_1\\) into triode and makes the transfer nonlinear.\n- Saturation requires \\(I_DR_D\\le V_T\\), so the usable saturated output swing is limited to approximately \\(V_T\\) below \\(V_{DD}\\).",
        "format": "markdown",
        "sha256": "cd49115d83b690f7f0d8f7813e195a32fefa53c54afb4046f5cb38d6580cb74f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology, positive gain, and low input resistance, with appropriate small-signal formulas including output resistance and body effect. The additional DC-region analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 941,
        "output_tokens": 30330,
        "total_tokens": 31271,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 941,
        "output_tokens": 30330,
        "total_tokens": 31271,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Topology\n\nReading \\(M_1\\) as the n-channel MOSFET shown:\n\n- Gate: tied directly to \\(V_{DD}\\)\n- Source: \\(V_{\\text{in}}\\)\n- Drain/output: \\(V_{\\text{out}}\\)\n- Drain load: \\(R_D\\) from \\(V_{DD}\\) to \\(V_{\\text{out}}\\)\n\nSince an ideal supply is an AC ground, the gate is common to input and output: this is a **common-gate stage**. The source driving \\(V_{\\text{in}}\\) must be capable of sinking the transistor’s DC current.\n\nThe terminal voltages are\n\n\\[\nV_{GS}=V_{DD}-V_{\\text{in}},\\qquad\nV_{DS}=V_{\\text{out}}-V_{\\text{in}},\n\\]\n\n\\[\nI_D=\\frac{V_{DD}-V_{\\text{out}}}{R_D},\n\\qquad\nV_{GD}=V_{DD}-V_{\\text{out}}=I_DR_D.\n\\]\n\n---\n\n## 2. DC transfer characteristic\n\nLet\n\n\\[\n\\beta=\\mu_n C_{\\text{ox}}\\frac WL,\\qquad\n\\Delta=V_{DD}-V_{\\text{in}}-V_{TH},\n\\qquad\nq=\\frac{1}{\\beta R_D},\n\\]\n\nand neglect channel-length modulation and body effect. Here \\(\\Delta\\) is the gate overdrive.\n\n### Cutoff\n\nIf \\(\\Delta\\leq 0\\), i.e.\n\n\\[\nV_{\\text{in}}\\geq V_{DD}-V_{TH},\n\\]\n\nthen\n\n\\[\n\\boxed{V_{\\text{out}}=V_{DD}}.\n\\]\n\n### Saturation\n\nFor an NMOS, saturation requires\n\n\\[\nV_{GD}\\leq V_{TH}\n\\quad\\Longleftrightarrow\\quad\nV_{\\text{out}}\\geq V_{DD}-V_{TH}\n\\quad\\Longleftrightarrow\\quad\nI_DR_D\\leq V_{TH}.\n\\]\n\nUsing \\(I_D=(\\beta/2)\\Delta^2\\),\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=V_{DD}-\\frac{\\beta R_D}{2}\\Delta^2\n=V_{DD}-\\frac{\\Delta^2}{2q}\n}.\n\\]\n\nThis remains valid while\n\n\\[\n0<\\Delta\\leq \\Delta_c,\\qquad\n\\Delta_c=\\sqrt{\\frac{2V_{TH}}{\\beta R_D}}\n=\\sqrt{2qV_{TH}}.\n\\]\n\nThus the saturation input range is\n\n\\[\nV_{DD}-V_{TH}-\\Delta_c\n\\le V_{\\text{in}}\n<V_{DD}-V_{TH}.\n\\]\n\nAt the saturation/triode boundary,\n\n\\[\nV_{\\text{out}}=V_{DD}-V_{TH},\\qquad\nI_D=\\frac{V_{TH}}{R_D}.\n\\]\n\nHence, with the gate at \\(V_{DD}\\), the output can fall by at most \\(V_{TH}\\) while remaining in saturation—a significant output-swing limitation.\n\n### Triode region\n\nFor \\(\\Delta>\\Delta_c\\), let \\(D=V_{DS}=V_{\\text{out}}-V_{\\text{in}}\\). Then\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n=\n\\beta\\left(\\Delta D-\\frac{D^2}{2}\\right),\n\\]\n\nwhich gives\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}-V_{TH}+q\n-\\sqrt{\\Delta^2+q^2-2qV_{TH}}\n}.\n\\]\n\nFor very large overdrive, \\(V_{\\text{out}}\\approx V_{\\text{in}}+q\\): the ON transistor behaves approximately as a small resistance and the output follows the input.\n\nOverall, the transfer characteristic is monotonic and **non-inverting**:\n\n- high \\(V_{\\text{in}}\\): transistor off, \\(V_{\\text{out}}=V_{DD}\\);\n- decreasing \\(V_{\\text{in}}\\): \\(V_{GS}\\) increases, \\(I_D\\) increases, and \\(V_{\\text{out}}\\) falls;\n- for very low \\(V_{\\text{in}}\\), \\(M_1\\) enters triode and \\(V_{\\text{out}}\\) approximately tracks \\(V_{\\text{in}}\\).\n\n---\n\n## 3. Small-signal behavior in saturation\n\nAt a bias point with overdrive \\(\\Delta\\),\n\n\\[\ng_m=\\beta\\Delta=\\frac{2I_D}{\\Delta}.\n\\]\n\nLet \\(G=g_m+g_{mb}\\), where \\(g_{mb}=0\\) if the body is tied to the source or body effect is neglected, and let \\(g_o=1/r_o\\).\n\nWith \\(V_{DD}\\) at AC ground,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n\\frac{G+g_o}{1/R_D+g_o}\n\\approx\nG(R_D\\parallel r_o)\n}\n\\]\n\nand, for \\(r_o\\gg R_D\\) with no body effect,\n\n\\[\n\\boxed{A_v\\approx g_mR_D>0}.\n\\]\n\nThus the stage is non-inverting. Intuitively, a positive \\(v_{\\text{in}}\\) lowers \\(V_{GS}\\), reduces \\(I_D\\), reduces the drop across \\(R_D\\), and raises \\(V_{\\text{out}}\\).\n\nOther important small-signal quantities are\n\n\\[\n\\boxed{\nR_{\\text{in}}\\approx\n\\frac{R_D+r_o}{1+G r_o}\n\\approx \\frac1G\n}\n\\]\n\nand, with the input voltage source set to zero,\n\n\\[\n\\boxed{\nR_{\\text{out}}\\approx R_D\\parallel r_o.\n}\n\\]\n\nSo a common-gate stage provides voltage gain with a relatively low input resistance, approximately \\(1/g_m\\) or \\(1/(g_m+g_{mb})\\).\n\n---\n\n## 4. Practical supply consideration\n\nTying the gate directly to \\(V_{DD}\\) makes it an AC ground only if the supply is well bypassed. If the supply has a small variation \\(v_{DD}\\), the gate follows it. With the body at AC ground,\n\n\\[\n\\left(\\frac1{R_D}+g_o\\right)v_{\\text{out}}\n=\n(G+g_o)v_{\\text{in}}\n+\n\\left(\\frac1{R_D}-g_m\\right)v_{DD}.\n\\]\n\nConsequently, supply noise can appear amplified and inverted at the output when \\(g_mR_D\\gg1\\). A clean, bypassed gate-bias voltage is normally preferable.\n\nIf the transistor symbol were intended to represent a p-channel device, then with its gate at \\(V_{DD}\\) and all other node voltages at or below \\(V_{DD}\\), it would remain off and \\(V_{\\text{out}}=V_{DD}\\); the preceding analysis assumes the usual n-channel interpretation.",
        "format": "markdown",
        "sha256": "5bf6c771d7ebceb3e1b6b73fc00a88d19ffaac76bb6894ccfb1c78a0259a26ad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven NMOS common-gate stage and gives the non-inverting gain and low input resistance. The added DC and small-signal analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 941,
        "output_tokens": 30328,
        "total_tokens": 31269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28972,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 941,
        "output_tokens": 30328,
        "total_tokens": 31269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28972,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an NMOS and all ground symbols are the same ideal ground, the key point is:\n\n> The source node of \\(M_1\\), i.e. the right plate of \\(C_1\\), is directly shorted to ground.  \n> Therefore it is both a dc and an ac ground.\n\nSo, **as drawn, \\(V_{\\text{in}}\\) cannot affect \\(V_{\\text{out}}\\)**.\n\n---\n\n## 1. DC bias\n\nAt dc, \\(C_1\\) is open. The source and body are at ground:\n\n\\[\nV_S=0,\\qquad V_G=V_b,\\qquad V_{OV}=V_b-V_{TN}.\n\\]\n\nIf \\(V_b<V_{TN}\\), \\(M_1\\) is off and\n\n\\[\nV_{\\text{out},Q}=V_{DD}.\n\\]\n\nIf \\(M_1\\) is on and saturated, neglecting channel-length modulation,\n\n\\[\nI_{DQ}\\approx \\frac12 \\mu_n C_{ox}\\frac WL (V_b-V_{TN})^2\n=\\frac12 \\beta V_{OV}^2,\n\\]\n\nand\n\n\\[\nV_{\\text{out},Q}=V_{DD}-I_{DQ}R_D.\n\\]\n\nSaturation requires\n\n\\[\nV_{\\text{out},Q}\\ge V_{OV}.\n\\]\n\nIf this condition fails, the device is in triode and \\(I_D\\) must be solved using the triode equation.\n\n---\n\n## 2. Small-signal gain from \\(V_{\\text{in}}\\)\n\nFor small signal, \\(V_{DD}\\) and the ideal bias source \\(V_b\\) are ac grounds. The source is also an ideal ac ground because of the wire to ground:\n\n\\[\nv_s=0,\\qquad v_g=0.\n\\]\n\nHence\n\n\\[\nv_{gs}=v_g-v_s=0,\n\\qquad\nv_{bs}=0.\n\\]\n\nThus neither \\(g_m v_{gs}\\) nor \\(g_{mb}v_{bs}\\) produces a signal current. At the drain,\n\n\\[\n\\left(\\frac1{R_D}+\\frac1{r_o}\\right)v_{\\text{out}}=0,\n\\]\n\nso\n\n\\[\nv_{\\text{out}}=0\n\\quad\\Rightarrow\\quad\n\\boxed{\\frac{v_{\\text{out}}}{v_{\\text{in}}}=0.}\n\\]\n\nThe current through \\(C_1\\),\n\n\\[\ni_{C_1}=sC_1 v_{\\text{in}},\n\\]\n\nsimply flows into the ideal ground. It does not enter the transistor channel because the zero-ohm ground path shunts the source node completely.\n\nSo \\(C_1\\) is just a capacitor from the input source to ground, not a useful coupling capacitor into the amplifier.\n\n---\n\n## 3. Input and output impedances, as drawn\n\nLooking into the input coupling capacitor:\n\n\\[\n\\boxed{Z_{\\text{in}}=\\frac1{sC_1}.}\n\\]\n\nWith all independent sources set to zero, the output sees\n\n\\[\n\\boxed{R_{\\text{out}}=R_D\\parallel r_o}\n\\]\n\nif \\(M_1\\) is on, or approximately \\(R_D\\) if \\(r_o\\to\\infty\\).\n\nThe gate bias node is the only effective small-signal input. If \\(V_b\\) had a small ac component \\(v_b\\), then\n\n\\[\n\\frac{v_{\\text{out}}}{v_b}\n\\approx -g_m(R_D\\parallel r_o),\n\\]\n\nbut \\(V_{\\text{in}}\\) still gives zero output.\n\n---\n\n## 4. If a common-gate amplifier was intended\n\nThe drawing resembles an intended common-gate stage: gate at ac ground, input applied to the source, output at the drain. But a common-gate input node must not be shorted to ground. The source needs a dc bias element with high small-signal resistance, e.g. a current sink, large resistor, or inductor.\n\nIf the ground short is replaced by such a bias element and \\(C_1\\) is a short at midband, then with\n\n\\[\nG=g_m+g_{mb},\\qquad R_D'=R_D\\parallel R_L,\n\\]\n\nthe source-to-drain gain is approximately\n\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{v_s}\n\\approx (g_m+g_{mb})(R_D'\\parallel r_o)\n\\approx (g_m+g_{mb})R_D',}\n\\]\n\nwhich is positive: a common-gate stage is non-inverting.\n\nThe input resistance looking into the source is roughly\n\n\\[\n\\boxed{R_{\\text{in,source}}\\approx \\frac1{g_m+g_{mb}}}\n\\]\n\nor, including \\(r_o\\),\n\n\\[\nR_{\\text{in,source}}\n=\\frac{r_o+R_D'}{1+(g_m+g_{mb})r_o}.\n\\]\n\nThe coupling capacitor then gives a high-pass corner approximately\n\n\\[\n\\omega_L\\approx\n\\frac1{C_1\\left(R_{\\text{sig}}+R_{\\text{in,total}}\\right)}.\n\\]\n\n---\n\n### Bottom line\n\n- **As drawn:** the source/input node is shorted to ground, so  \n  \\[\n  \\boxed{A_v=v_{\\text{out}}/v_{\\text{in}}=0.}\n  \\]\n- \\(V_b\\) sets the dc drain current and \\(V_{\\text{out},Q}\\).\n- \\(C_1\\) merely loads the input source.\n- To obtain a working common-gate amplifier, replace the source-to-ground short with a high-impedance dc bias path.",
        "format": "markdown",
        "sha256": "0b7e616d16918af6ffc8b48d0c478d1d015ea40d65f72f433f896d8580fce44c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source node is directly shorted to ground, so the input is shunted and the ideal gain from Vin is zero. This satisfies the golden solution’s full-credit rule; the extra discussion does not undermine that conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1501,
        "output_tokens": 27179,
        "total_tokens": 28680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26058,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1501,
        "output_tokens": 27179,
        "total_tokens": 28680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26058,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(V_b\\) is an ideal dc bias and the ground symbols represent ideal ground. The key point is that the junction of \\(C_1\\), the lower terminal of \\(M_1\\), and ground is directly shorted to ground.\n\n## 1. DC operating point\n\nSince \\(C_1\\) is open at dc, \\(V_{in}\\) has no effect on the bias. For an NMOS,\n\n\\[\nV_{GS}=V_b,\\qquad V_S=0,\\qquad V_{OV}=V_b-V_{TN}.\n\\]\n\nIf \\(V_b\\le V_{TN}\\), \\(M_1\\) is off and\n\n\\[\nV_{out,Q}=V_{DD}.\n\\]\n\nIf \\(M_1\\) is saturated and channel-length modulation is neglected,\n\n\\[\nI_{DQ}=\\frac12 \\mu_n C_{ox}\\frac WL (V_b-V_{TN})^2\n      =\\frac12\\beta_n V_{OV}^2,\n\\]\n\n\\[\n\\boxed{V_{out,Q}=V_{DD}-R_D I_{DQ}}.\n\\]\n\nSaturation requires\n\n\\[\nV_{out,Q}\\ge V_{OV}.\n\\]\n\nOtherwise, \\(M_1\\) is in triode and \\(V_{out,Q}\\) is found from\n\n\\[\n\\frac{V_{DD}-V_{out,Q}}{R_D}\n=\n\\beta_n\\left[V_{OV}V_{out,Q}-\\frac{V_{out,Q}^2}{2}\\right].\n\\]\n\nWith channel-length modulation,\n\n\\[\nI_D\\simeq \\frac12\\beta_n V_{OV}^2(1+\\lambda V_{out}),\n\\qquad\nV_{out,Q}\n=\n\\frac{V_{DD}-R_D I_{D0}}{1+\\lambda R_D I_{D0}},\n\\]\n\nwhere \\(I_{D0}=\\frac12\\beta_nV_{OV}^2\\).\n\n---\n\n## 2. Small-signal behavior from \\(V_{in}\\)\n\nAt signal frequencies, \\(V_b\\) is an ac ground. More importantly, the source/input junction is also an ideal ac ground:\n\n\\[\nv_s=0,\\qquad v_g=0.\n\\]\n\nConsequently,\n\n\\[\nv_{gs}=0,\\qquad v_{bs}=0,\n\\]\n\nso neither \\(g_m v_{gs}\\) nor \\(g_{mb}v_{bs}\\) produces a signal current in \\(M_1\\).\n\nMore formally, with \\(g_D=1/R_D\\), \\(g_o=1/r_o\\), and \\(G=g_m+g_{mb}\\) for a fixed bulk,\n\n\\[\n(g_D+g_o)v_o=(G+g_o)v_s-g_m v_b.\n\\]\n\nHere \\(v_s=0\\) and \\(v_b=0\\), hence\n\n\\[\n\\boxed{v_o=0,\\qquad \\frac{v_o}{v_{in}}=0}.\n\\]\n\nThus, as literally drawn,\n\n\\[\n\\boxed{H(s)=0}\n\\]\n\nand the circuit has no voltage gain from \\(V_{in}\\). The capacitor is simply connected from the \\(V_{in}\\) terminal to ground:\n\n\\[\ni_{in}=sC_1V_{in},\\qquad Z_{in}=\\frac{1}{sC_1}.\n\\]\n\nIt only draws reactive current from the input source; that current is absorbed by the ideal ground and does not modulate the transistor current.\n\nIf \\(V_b\\) itself contains a small signal \\(v_b\\), the output does respond to it as a common-source stage:\n\n\\[\n\\boxed{\\frac{v_o}{v_b}\\simeq -g_m(R_D\\parallel r_o)}.\n\\]\n\n---\n\n## 3. Likely intended circuit\n\nThe circuit appears to have been intended as a **common-gate amplifier**: gate at ac ground through \\(V_b\\), input coupled to the source, and output at the drain. For this to work, the source must have a dc bias path but **not** be shorted to ac ground. The lower ground connection should be replaced by, for example:\n\n- an ideal bias current source,\n- a large resistor \\(R_B\\),\n- or an RF choke/bias inductor.\n\nLet \\(R_B\\) be the small-signal resistance of this bias element and define\n\n\\[\nG=g_m+g_{mb}\n\\]\n\nwith the bulk at ac ground. If the bulk is tied to the source, use \\(G=g_m\\). Ignoring \\(r_o\\), the source input resistance and common-gate voltage gain are approximately\n\n\\[\nr_{in,s}\\simeq \\frac{1}{G},\n\\]\n\n\\[\n\\frac{v_o}{v_s}\\simeq +G(R_D\\parallel r_o)\\approx +G R_D.\n\\]\n\nIncluding \\(r_o\\),\n\n\\[\n\\frac{v_o}{v_s}\n=\n\\frac{G+1/r_o}{1/R_D+1/r_o},\n\\]\n\n\\[\nr_{in,s}\n=\n\\frac{R_D+r_o}{1+G r_o}\n\\approx \\frac1G.\n\\]\n\nWith source resistance \\(R_s\\) and coupling capacitor \\(C_1\\),\n\n\\[\nZ_s=R_B\\parallel r_{in,s},\n\\]\n\n\\[\n\\boxed{\n\\frac{v_o}{v_{in}}(s)\n=\n\\frac{G+1/r_o}{1/R_D+1/r_o}\n\\,\n\\frac{Z_s}{R_s+\\dfrac{1}{sC_1}+Z_s}\n}.\n\\]\n\nThe coupling-capacitor low-frequency corner is approximately\n\n\\[\n\\omega_L\\simeq \\frac{1}{C_1(R_s+Z_s)}.\n\\]\n\nFor an ideal current-source bias, negligible \\(r_o\\), and an ideal input voltage source,\n\n\\[\n\\boxed{A_v\\approx +(g_m+g_{mb})R_D\\approx g_mR_D}\n\\]\n\nwhich is the usual noninverting common-gate gain.\n\n**Bottom line:** as drawn, the source is shorted to ground and the gain from \\(V_{in}\\) is exactly zero. The standard common-gate result applies only if that ground is replaced by a dc bias element having finite/high small-signal impedance.",
        "format": "markdown",
        "sha256": "34994eaca4986f7c06ec341e3910e9465cdd0b2c980490d12917524c5a18bcc2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source/input node is hard-shorted to ground and concludes the ideal gain from Vin is zero. The separate discussion of a possible intended common-gate circuit does not contradict that conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1501,
        "output_tokens": 24161,
        "total_tokens": 25662,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22957,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1501,
        "output_tokens": 24161,
        "total_tokens": 25662,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22957,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume that all ground symbols are the same ideal ground, \\(V_{DD}\\) and \\(V_b\\) are ideal DC sources, and \\(M_1\\) is an NMOS.\n\n## 1. Key observation\n\nThe right-hand plate of \\(C_1\\) is connected to the source/body node of \\(M_1\\), and that same node is directly shorted to ground. Therefore it is clamped to zero volts both at DC and at signal frequencies:\n\n\\[\nv_s(t)=0.\n\\]\n\nThus \\(C_1\\) is simply connected from the input source to ground. It does not couple \\(v_{\\text{in}}\\) into any control terminal of the transistor. A direct ground is not merely a DC bias connection—it is also an AC short.\n\n---\n\n## 2. DC operating point\n\nAt DC, \\(C_1\\) is open. Hence\n\n\\[\nV_{GS}=V_b,\\qquad V_S=V_{SB}=0,\n\\]\n\nso there is no DC body effect. Let\n\n\\[\nV_{OV}=V_b-V_{TH},\\qquad K_n=\\mu_n C_{ox}\\frac WL.\n\\]\n\n- If \\(V_b\\le V_{TH}\\), \\(M_1\\) is off and\n\n\\[\nV_{out,Q}\\approx V_{DD}.\n\\]\n\n- If \\(M_1\\) is on and in saturation, neglecting channel-length modulation,\n\n\\[\nI_{D,Q}=\\frac{K_n}{2}V_{OV}^2,\n\\]\n\n\\[\n\\boxed{V_{out,Q}=V_{DD}-R_D I_{D,Q}}.\n\\]\n\nSaturation requires\n\n\\[\nV_{out,Q}\\ge V_{OV}.\n\\]\n\nWith channel-length modulation,\n\n\\[\nI_D=\\frac{K_n}{2}V_{OV}^2(1+\\lambda V_{out,Q}),\n\\qquad\nV_{out,Q}=V_{DD}-R_DI_D.\n\\]\n\nIf \\(V_{out,Q}<V_{OV}\\), the transistor is in triode and the corresponding triode current equation must be used.\n\nThus the circuit has a well-defined DC bias point, but it is merely a fixed-current transistor branch—not an amplifier from \\(v_{\\text{in}}\\).\n\n---\n\n## 3. Small-signal gain from \\(V_{\\text{in}}\\)\n\nFor small-signal analysis, \\(V_{DD}\\) and \\(V_b\\) are AC grounds. Since the source and body are also grounded,\n\n\\[\nv_{gs}=0,\\qquad v_{bs}=0,\\qquad v_{ds}=v_o.\n\\]\n\nThe transistor drain current is therefore\n\n\\[\ni_d=g_m v_{gs}+g_{mb}v_{bs}+\\frac{v_o}{r_o}\n    =\\frac{v_o}{r_o}.\n\\]\n\nIncluding an output capacitance \\(C_o\\approx C_{gd}+C_{db}+C_L\\), the drain-node KCL is\n\n\\[\n\\left(\\frac1{R_D}+\\frac1{r_o}+sC_o\\right)v_o=0.\n\\]\n\nThere is no independent input-driven term, so\n\n\\[\n\\boxed{v_o=0,\\qquad\n\\frac{v_o}{v_{\\text{in}}}(s)=0}.\n\\]\n\nThe input source only drives capacitor current into ground:\n\n\\[\ni_{C_1}=sC_1v_{\\text{in}}.\n\\]\n\nThat current is absorbed by the ideal ground and does not change \\(v_{gs}\\), \\(v_{bs}\\), or the transistor current. Consequently, there is no low-frequency cutoff that eventually enables amplification; the gain is zero at every frequency, apart from unintended parasitic effects such as finite ground impedance or electromagnetic coupling.\n\nA small signal on the \\(V_b\\) terminal would be amplified:\n\n\\[\n\\frac{v_o}{v_b}\\approx -g_m(R_D\\parallel r_o),\n\\]\n\nbut \\(v_{\\text{in}}\\) is not connected to that terminal.\n\n---\n\n## 4. Terminal impedances\n\nFrom the input source, \\(C_1\\) is simply a capacitor to ground:\n\n\\[\n\\boxed{Z_{\\text{in}}=\\frac{1}{sC_1}}.\n\\]\n\nAt DC it is open; at high frequency it approaches a short.\n\nLooking back into the output, with \\(V_b\\), source, and body at AC ground,\n\n\\[\n\\boxed{\nZ_{\\text{out}}(s)=\n\\left(\\frac1{R_D}+\\frac1{r_o}+sC_o\\right)^{-1}\n}\n\\]\n\nand at low frequency,\n\n\\[\nR_{\\text{out}}\\approx R_D\\parallel r_o.\n\\]\n\nThe output pole is approximately\n\n\\[\n\\omega_p\\approx\n\\frac{1}{(R_D\\parallel r_o)C_o}.\n\\]\n\n---\n\n## 5. If a common-gate amplifier was intended\n\nA common-gate stage requires the source to have a DC bias path but a finite—usually large—AC impedance. The direct ground should therefore be replaced by, for example:\n\n- a bias current source with high output resistance \\(R_B\\),\n- an RF choke/inductor, with \\(Z_B=sL\\),\n- or another high-impedance bias network.\n\nFor such a circuit, with gate at AC ground and body fixed, define\n\n\\[\nG=g_m+g_{mb}+\\frac1{r_o}.\n\\]\n\nThe source-to-drain gain is\n\n\\[\n\\boxed{\n\\frac{v_o}{v_s}\n=\n\\frac{G}{\\,1/R_D+1/r_o+sC_o\\,}\n\\approx\n(g_m+g_{mb})(R_D\\parallel r_o)\n}\n\\]\n\nand is positive. If the body is tied to the source, set \\(g_{mb}=0\\).\n\nThe resistance looking into the source is\n\n\\[\n\\boxed{\nR_{\\text{in,s}}\n=\n\\frac{r_o+R_D}\n{1+(g_m+g_{mb})r_o}\n\\approx\n\\frac{1}{g_m+g_{mb}}\n}\n\\]\n\nfor \\(r_o\\gg R_D\\).\n\nIf the bias network has impedance \\(Z_B\\), then\n\n\\[\nZ_s=Z_B\\parallel R_{\\text{in,s}},\n\\]\n\nand, for an input source with resistance \\(R_s\\),\n\n\\[\n\\frac{v_s}{v_{\\text{in}}}\n=\n\\frac{Z_s}\n{R_s+Z_s+\\frac1{sC_1}}.\n\\]\n\nFor an ideal input source, \\(R_s=0\\), giving the usual high-pass corner\n\n\\[\n\\omega_L\\approx\\frac{1}{C_1 Z_s}.\n\\]\n\nIn the circuit as actually drawn, however, \\(Z_B=0\\), hence \\(Z_s=0\\) and the gain returns to zero.\n\n## Conclusion\n\nAs drawn, the source/input node is hard-wired to ground, so \\(C_1\\) cannot deliver a signal to \\(M_1\\). The transistor has a valid DC operating point but\n\n\\[\n\\boxed{A_v=0}.\n\\]\n\nTo obtain amplification, either connect \\(C_1\\) to the gate with a high-resistance gate-bias network (common-source, negative gain), or replace the source-to-ground short with a high-AC-impedance bias element (common-gate, positive gain).",
        "format": "markdown",
        "sha256": "4b52c37a80bb5a8ab8f7ba62433bd548a918e9bf3995a16cecda90dc0b59fb3a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies that the source node is hard-shorted to ground, so the input cannot drive the transistor and the ideal gain from Vin is zero, satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1501,
        "output_tokens": 23408,
        "total_tokens": 24909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21974,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1501,
        "output_tokens": 23408,
        "total_tokens": 24909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21974,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**As drawn, the circuit has three poles** (assuming the source is capacitively terminated rather than hard AC-grounded, and no accidental pole–zero cancellation).\n\nSet the DC sources to AC ground and identify the independent capacitor voltages:\n\n- \\(C_{GS}\\) gives the gate-node state \\(v_g\\).\n- \\(C_{DB}\\) gives the drain/output-node state \\(v_o\\).\n- \\(C_{SB}\\), together with any parallel source capacitance, gives the source-node state \\(v_s\\).\n- \\(C_{GD}\\) has voltage \\(v_g-v_o\\), so it is not an additional independent state; it forms a capacitor loop with \\(C_{GS}\\) and \\(C_{DB}\\).\n\nThus the capacitance matrix has rank 3, so \\(\\det(s\\mathbf C+\\mathbf G)\\) is cubic: one pole associated with the gate, one with the drain, and one with the source dynamics. \\(C_{GD}\\) may introduce zeros, but not a fourth pole.\n\nIf the source is intended to be an **ideal AC ground** (short or ideal voltage source), then \\(C_{SB}\\) is bypassed and the count reduces to **two poles**—one at the gate and one at the drain.",
        "format": "markdown",
        "sha256": "fb226210ed9e2e196de7524a448ba806ca710d1e1c52107180dd5138c1d0a060"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The circuit’s source is grounded, so CSB is shorted out and the circuit has two poles. The answer’s main claim of three poles comes from incorrectly treating the source as dynamic, although it identifies the two-pole result under an ideal-ground assumption.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1619,
        "output_tokens": 32931,
        "total_tokens": 34550,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32681,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1619,
        "output_tokens": 32931,
        "total_tokens": 34550,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32681,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\[\n\\boxed{\\text{The circuit has 2 finite poles.}}\n\\]\n\nFor the small-signal circuit, \\(V_{DD}\\) and \\(V_{in}\\) are set to AC ground, and the source/body of \\(M_1\\) is grounded, so \\(C_{SB}\\) is bypassed. The only independent dynamic node voltages are the gate voltage \\(v_g\\) and output voltage \\(v_o\\). The remaining capacitor voltages satisfy\n\n\\[\nv_{C_{GS}}=v_g,\\qquad\nv_{C_{DB}}=v_o,\\qquad\nv_{C_{GD}}=v_g-v_o,\n\\]\n\nso only two capacitor voltages are independent. Thus the characteristic equation is quadratic, giving two poles. With \\(r_o\\) neglected, its denominator has the form\n\n\\[\nD(s)=1+a_1s+\nR_SR_D\\!\\left(C_{GS}C_{DB}+C_{GS}C_{GD}+C_{GD}C_{DB}\\right)s^2 .\n\\]\n\nThe feedforward path through \\(C_{GD}\\) also introduces a right-half-plane zero at approximately \\(s=g_m/C_{GD}\\), but this is a zero, not an additional pole.\n\nIf the source/body node were intentionally floating rather than AC-grounded, \\(C_{SB}\\) would add a third state variable and the circuit would have three poles; that is not the conventional grounded-source interpretation of the figure.",
        "format": "markdown",
        "sha256": "628fa65088a8b3c5d86c2890d73b031154c8157c1443e01d74c4b29be9a553a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count from the grounded C_SB and the two independent capacitor voltages; the extra zero is correctly distinguished from a pole.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1619,
        "output_tokens": 31992,
        "total_tokens": 33611,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1619,
        "output_tokens": 31992,
        "total_tokens": 33611,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31705,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**In general, the circuit has 2 poles** (assuming finite \\(R_S\\), finite \\(R_D\\), and no special pole-zero cancellations).\n\nTo count poles, set the independent sources \\(V_{in}\\) and \\(V_{DD}\\) to AC ground. Then:\n\n- The **source of \\(M_1\\)** is grounded, so \\(C_{SB}\\) is effectively shorted to ground and contributes no independent energy-storage state.\n- There are only two independent dynamic node voltages: the gate node \\(v_g\\) and the drain/output node \\(v_d\\).\n- The remaining capacitor voltages are\n  \\[\n  v_{C_{GS}}=v_g,\\qquad v_{C_{DB}}=v_d,\\qquad v_{C_{GD}}=v_g-v_d .\n  \\]\n  Thus \\(C_{GD}\\) is not an extra independent state; its voltage is determined by \\(v_g\\) and \\(v_d\\).\n\nSo the small-signal determinant is second order in \\(s\\): one pole is associated mainly with the input node, and one with the output node. \\(C_{GD}\\) can introduce a zero, but not an additional pole.\n\n**Answer: \\(\\boxed{2\\text{ poles}}\\).**\n\nCaveat: if \\(R_S=0\\), the gate is clamped by an ideal voltage source and one of these poles disappears; if the MOS source were not AC-grounded, \\(C_{SB}\\) could add another pole.",
        "format": "markdown",
        "sha256": "2be42e3c5f89e527d47304348524d443d41db6ae47e5b3fbb6e601f11f3071c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count using the capacitor connections: CSB is shorted out, and the remaining capacitor voltages are determined by the gate and drain voltages. The caveats do not undermine the answer.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1619,
        "output_tokens": 16069,
        "total_tokens": 17688,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1619,
        "output_tokens": 16069,
        "total_tokens": 17688,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an enhancement NMOS with drain at \\(V_{\\text{out}}\\), source/body at \\(V_{\\text{in}}\\), and gate at \\(V_F\\). Also assume low-frequency operation, zero gate current, and no external load.\n\nDefine\n\n\\[\nR_F=R_1+R_2,\\qquad \n\\beta=\\frac{R_2}{R_1+R_2},\\qquad\nR_x=R_D\\parallel R_F .\n\\]\n\nBecause the gate draws no current,\n\n\\[\nV_F=\\beta V_{\\text{out}},\\qquad v_f=\\beta v_o .\n\\]\n\nThe divider also loads the output; if \\(R_1+R_2\\gg R_D\\), this loading can be neglected and \\(R_x\\simeq R_D\\).\n\n## 1. Feedback polarity\n\nA rise in \\(v_o\\) raises \\(v_f\\), increasing \\(I_D\\) and hence pulling \\(v_o\\) back down. Thus this is **negative feedback**. It is a non-inverting, voltage-series feedback amplifier based on a common-gate transistor.\n\n## 2. Small-signal voltage gain\n\nNeglecting \\(r_o\\) and body effect,\n\n\\[\ni_d=g_m(v_f-v_i)=g_m(\\beta v_o-v_i).\n\\]\n\nKCL at the output, with \\(V_{DD}\\) at AC ground, gives\n\n\\[\n\\frac{v_o}{R_x}+i_d=0,\n\\]\n\nso\n\n\\[\nv_o=g_mR_x(v_i-v_f)\n    =g_mR_x(v_i-\\beta v_o).\n\\]\n\nTherefore\n\n\\[\n\\boxed{\\frac{v_o}{v_i}\n=\\frac{g_mR_x}{1+\\beta g_mR_x}}\n\\]\n\nor, in feedback form,\n\n\\[\nA=g_mR_x,\\qquad\nT=A\\beta=g_m\\beta R_x,\\qquad\nA_v=\\frac{A}{1+T}.\n\\]\n\nIf divider loading is neglected,\n\n\\[\nA_v\\simeq \\frac{g_mR_D}{1+g_mR_D\\,R_2/(R_1+R_2)}.\n\\]\n\nFor large loop gain \\(T\\gg1\\),\n\n\\[\n\\boxed{\\frac{v_o}{v_i}\\approx\\frac{1}{\\beta}\n=1+\\frac{R_1}{R_2}}.\n\\]\n\nThus the gain is set mainly by the resistor ratio, as in a non-inverting op-amp.\n\n### Including \\(r_o\\)\n\nWith \\(g_o=1/r_o\\),\n\n\\[\ni_d=g_m(\\beta v_o-v_i)+g_o(v_o-v_i),\n\\]\n\nand\n\n\\[\n\\boxed{\nA_v=\\frac{g_m+g_o}\n{1/R_x+g_o+\\beta g_m}\n}.\n\\]\n\nIf the body is fixed at AC ground rather than tied to the source, add \\(g_{mb}\\) to the numerator:\n\n\\[\nA_v=\\frac{g_m+g_{mb}+g_o}\n{1/R_x+g_o+\\beta g_m}.\n\\]\n\n## 3. DC operation\n\nThe DC node equation is\n\n\\[\n\\frac{V_{DD}-V_o}{R_D}\n=\\frac{V_o}{R_F}+I_D.\n\\]\n\nEquivalently, the passive network at the drain has Thevenin voltage and resistance\n\n\\[\nV_X=V_{DD}\\frac{R_F}{R_D+R_F},\n\\qquad\nR_x=R_D\\parallel R_F,\n\\]\n\nso\n\n\\[\n\\boxed{V_o=V_X-R_x I_D}.\n\\]\n\nFor the transistor,\n\n\\[\nV_{GS}=\\beta V_o-V_i,\\qquad\nV_{DS}=V_o-V_i.\n\\]\n\nIn saturation, with body tied to the source,\n\n\\[\nI_D=\\frac{k_n}{2}\n\\left(\\beta V_o-V_i-V_T\\right)^2\n\\left[1+\\lambda(V_o-V_i)\\right],\n\\qquad k_n=\\mu_nC_{\\rm ox}\\frac WL .\n\\]\n\nThe saturation condition is\n\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\;\\Longleftrightarrow\\;\n(1-\\beta)V_o+V_T\\ge0,\n\\]\n\nwhich is normally satisfied for \\(V_o>0\\) and \\(V_T>0\\). Hence \\(M_1\\) is normally either off or in saturation.\n\nWhen \\(M_1\\) is off,\n\n\\[\nV_o=V_X,\\qquad V_F=\\beta V_X,\n\\]\n\nand cutoff occurs approximately when\n\n\\[\n\\boxed{V_i\\gtrsim \\beta V_X-V_T}.\n\\]\n\nFor \\(\\lambda=0\\), an explicit transfer relation can be obtained by defining the overdrive\n\n\\[\nu=\\beta V_o-V_i-V_T.\n\\]\n\nThen\n\n\\[\n\\frac{\\beta R_x k_n}{2}u^2+u\n=\\beta V_X-V_i-V_T,\n\\]\n\nand\n\n\\[\nV_o=\\frac{V_i+V_T+u}{\\beta}.\n\\]\n\nFor large loop gain, \\(u=V_{OV}\\) changes only weakly with \\(V_i\\), giving\n\n\\[\nV_o\\approx \\frac{V_i+V_{GS,Q}}{\\beta}.\n\\]\n\nThus there is a DC level shift \\(V_{GS,Q}/\\beta\\), while the incremental gain is approximately \\(1/\\beta\\).\n\n## 4. Input and output resistances\n\nFor \\(r_o\\to\\infty\\),\n\n\\[\ni_i=g_m(v_i-v_f)=\\frac{g_m}{1+T}v_i,\n\\]\n\nso looking into the source,\n\n\\[\n\\boxed{R_{\\text{in}}\\simeq\\frac{1+T}{g_m}\n=\\frac{1}{g_m}+\\beta R_x}.\n\\]\n\nWith \\(v_i=0\\), a test voltage at the output gives\n\n\\[\n\\boxed{R_{\\text{out}}\\simeq\\frac{R_x}{1+T}},\n\\]\n\nor with finite \\(r_o\\),\n\n\\[\n\\boxed{\nR_{\\text{out}}=\n\\frac{1}{1/R_x+g_o+\\beta g_m}\n}.\n\\]\n\nThus negative feedback raises the input resistance and lowers the output resistance by approximately \\(1+T\\).\n\n## Main conclusion\n\nThe circuit is a **non-inverting common-gate feedback amplifier**:\n\n\\[\n\\boxed{\n\\frac{v_o}{v_i}\n=\\frac{g_m[R_D\\parallel(R_1+R_2)]}\n{1+g_m[R_D\\parallel(R_1+R_2)]\\,\\dfrac{R_2}{R_1+R_2}}\n\\approx 1+\\frac{R_1}{R_2}\n}\n\\]\n\nprovided the loop gain is large. The finite-\\(g_m\\), finite-\\(r_o\\), divider-loading, body-effect, and DC headroom corrections are given above. At high frequency, gate and drain capacitances must be included in \\(\\beta(s)\\) and the phase margin should be checked.",
        "format": "markdown",
        "sha256": "5892e4a37f97ae8bb1b26001b758076f89662544ded31602cbf298801be5f382"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1384,
        "output_tokens": 26948,
        "total_tokens": 28332,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25597,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1384,
        "output_tokens": 26948,
        "total_tokens": 28332,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25597,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the device is the NMOS shown, with:\n\n- drain at \\(V_{\\text{out}}\\),\n- source/body at \\(V_{\\text{in}}\\),\n- gate at \\(V_F\\),\n- \\(V_{DD}\\) ac-grounded for small signal,\n\nthis is a **common-gate stage with negative voltage feedback**. The feedback divider samples \\(V_{\\text{out}}\\) and applies \\(V_F\\) to the gate.\n\n---\n\n## 1. Feedback factor and output loading\n\nSince the MOS gate draws essentially no dc current,\n\n\\[\nV_F=\\beta V_{\\text{out}},\\qquad \n\\beta=\\frac{R_2}{R_1+R_2}.\n\\]\n\nHowever, \\(R_1+R_2\\) still loads the output. Define\n\n\\[\nR_F=R_1+R_2,\\qquad \nR_L=R_D\\parallel R_F.\n\\]\n\nThe output network can be replaced, for small-signal and Thevenin dc analysis, by\n\n\\[\nV_X=V_{DD}\\frac{R_F}{R_D+R_F}\n\\]\n\nin series with \\(R_L=R_D\\parallel R_F\\). If the divider current is negligible, \\(R_L\\approx R_D\\) and \\(V_X\\approx V_{DD}\\).\n\n---\n\n## 2. DC / large-signal operation\n\nLet\n\n\\[\nk_n=\\mu_n C_{ox}\\frac{W}{L},\\qquad \nV_{OV}=V_{GS}-V_T=\\beta V_{\\text{out}}-V_{\\text{in}}-V_T.\n\\]\n\nAt the output node,\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n=\n\\frac{V_{\\text{out}}}{R_1+R_2}+I_D,\n\\]\n\nor equivalently,\n\n\\[\n\\frac{V_X-V_{\\text{out}}}{R_L}=I_D.\n\\]\n\nIf \\(M_1\\) is off, then\n\n\\[\nV_{\\text{out}}=V_X,\n\\]\n\nprovided\n\n\\[\n\\beta V_X \\le V_{\\text{in}}+V_T.\n\\]\n\nIf \\(M_1\\) is on, then in saturation, neglecting channel-length modulation,\n\n\\[\nI_D=\\frac{k_n}{2}\n\\left(\\beta V_{\\text{out}}-V_{\\text{in}}-V_T\\right)^2.\n\\]\n\nThus the dc transfer characteristic is given implicitly by\n\n\\[\n\\boxed{\n\\frac{V_X-V_{\\text{out}}}{R_L}\n=\n\\frac{k_n}{2}\n\\left(\\beta V_{\\text{out}}-V_{\\text{in}}-V_T\\right)^2\n}\n\\]\n\nwith \\(V_{\\text{out}}<V_X\\). With channel-length modulation, multiply \\(I_D\\) by \\(1+\\lambda V_{DS}\\).\n\nFor normal positive \\(V_{\\text{out}}\\), when the transistor is on it is in saturation. Indeed,\n\n\\[\nV_{DS}-V_{OV}\n=\n(V_{\\text{out}}-V_{\\text{in}})\n-\n(\\beta V_{\\text{out}}-V_{\\text{in}}-V_T)\n=\n(1-\\beta)V_{\\text{out}}+V_T>0.\n\\]\n\nAt a bias point,\n\n\\[\nV_F=V_{\\text{in}}+V_T+V_{OV},\n\\]\n\nso\n\n\\[\nV_{\\text{out}}=\\frac{V_{\\text{in}}+V_T+V_{OV}}{\\beta}.\n\\]\n\nThus there is a dc level shift due to \\(V_{GS}\\), but for small-signal changes the circuit behaves like a feedback amplifier.\n\n---\n\n## 3. Small-signal voltage gain\n\nFor small signals,\n\n\\[\nv_f=\\beta v_o.\n\\]\n\nLet \\(g_m=k_n V_{OV}\\) and \\(g_o=1/r_o\\). Taking drain current from drain to source as positive,\n\n\\[\ni_d=g_m(v_f-v_{in})+g_o(v_o-v_{in}).\n\\]\n\nKCL at the output node gives\n\n\\[\n\\frac{v_o}{R_L}+\ng_m(\\beta v_o-v_{in})+\ng_o(v_o-v_{in})=0.\n\\]\n\nTherefore\n\n\\[\n\\boxed{\n\\frac{v_o}{v_{in}}\n=\n\\frac{g_m+g_o}\n{\\frac{1}{R_L}+g_o+\\beta g_m}\n}\n\\]\n\nor, if \\(r_o\\) is large,\n\n\\[\n\\boxed{\nA_v\\approx\n\\frac{g_m R_L}{1+\\beta g_m R_L}\n}\n\\]\n\nThis has the standard negative-feedback form\n\n\\[\nA_v=\\frac{A}{1+A\\beta},\n\\qquad A\\approx g_mR_L.\n\\]\n\nFor large loop gain\n\n\\[\nT=\\beta g_mR_L\\gg 1,\n\\]\n\nthe gain reduces to\n\n\\[\n\\boxed{\nA_v\\approx \\frac{1}{\\beta}\n=\n1+\\frac{R_1}{R_2}\n}\n\\]\n\nwhich is the noninverting amplifier result.\n\nIf the divider loading is neglected, use \\(R_L\\approx R_D\\):\n\n\\[\nA_v\\approx \\frac{g_mR_D}{1+\\beta g_mR_D}.\n\\]\n\n---\n\n## 4. Feedback polarity\n\nAn increase in \\(v_o\\) raises \\(v_f=\\beta v_o\\). For fixed \\(v_{in}\\), this increases \\(v_{GS}\\), increases the drain current, and pulls \\(v_o\\) down through \\(R_D\\). Therefore the feedback is **negative**.\n\nThe topology is series mixing at the input and voltage/shunt sampling at the output, i.e. a voltage–voltage feedback amplifier.\n\n---\n\n## 5. Input and output resistances\n\nNeglecting \\(r_o\\),\n\n\\[\nR_{in}\\approx \\frac{1+T}{g_m}\n=\n\\frac{1}{g_m}+\\beta R_L,\n\\]\n\nand\n\n\\[\nR_{out}\\approx \\frac{R_L}{1+T}\n=\n\\frac{1}{\\frac{1}{R_L}+\\beta g_m}.\n\\]\n\nWith finite \\(g_o\\),\n\n\\[\nR_{out}\\approx\n\\frac{1}{\\frac{1}{R_L}+g_o+\\beta g_m}.\n\\]\n\nSo the negative feedback raises the input resistance and lowers the output resistance.\n\n---\n\n### Main result\n\nThe circuit is a noninverting negative-feedback amplifier. Its low-frequency gain is\n\n\\[\n\\boxed{\n\\frac{v_{out}}{v_{in}}\n\\approx\n\\frac{g_m\\bigl(R_D\\parallel(R_1+R_2)\\bigr)}\n{1+\n\\frac{R_2}{R_1+R_2}\ng_m\\bigl(R_D\\parallel(R_1+R_2)\\bigr)}\n}\n\\]\n\nand for large loop gain,\n\n\\[\n\\boxed{\n\\frac{v_{out}}{v_{in}}\\approx 1+\\frac{R_1}{R_2}.\n}\n\\]\n\nThe dc output contains an offset determined by \\(V_T\\) and the required overdrive \\(V_{OV}\\).",
        "format": "markdown",
        "sha256": "7cf88263e68ac1412657ffe72665864f528633d79191af2486fa622ffd86ea04"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven NMOS, output-to-gate divider feedback, and negative feedback, and gives the correct closed-loop gain and large-loop-gain limit. Secondary details do not affect the essential answer.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1384,
        "output_tokens": 33348,
        "total_tokens": 34732,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31967,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1384,
        "output_tokens": 33348,
        "total_tokens": 34732,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31967,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an NMOS operating in saturation, with \\(V_{in}\\) at the source, \\(V_F\\) at the gate, and \\(V_{out}\\) at the drain. Also assume initially that \\(r_o\\to\\infty\\), body effect is negligible, and there is no external load.\n\nDefine\n\n\\[\nR_\\Sigma=R_1+R_2,\\qquad\n\\beta=\\frac{R_2}{R_1+R_2}.\n\\]\n\nSince the MOS gate draws essentially no current,\n\n\\[\nV_F=\\beta V_{out},\\qquad v_f=\\beta v_{out}.\n\\]\n\n## 1. DC operation and feedback polarity\n\nAt the bias point,\n\n\\[\nV_{GS}=\\beta V_{out}-V_{in}.\n\\]\n\nThe drain-node KCL is\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=\nI_D+\\frac{V_{out}}{R_\\Sigma}.\n\\]\n\nNeglecting channel-length modulation,\n\n\\[\nI_D \\simeq \\frac{1}{2}\\mu_n C_{ox}\\frac WL\n\\left(\\beta V_{out}-V_{in}-V_{TH}\\right)^2.\n\\]\n\nThese equations determine the DC operating point and hence \\(g_m\\).\n\nThe loop is negative:\n\n\\[\nV_{out}\\uparrow \\Rightarrow V_F\\uparrow\n\\Rightarrow V_{GS}\\uparrow \\Rightarrow I_D\\uparrow\n\\Rightarrow \\text{larger drop across }R_D\n\\Rightarrow V_{out}\\downarrow .\n\\]\n\nOn the other hand, \\(V_{in}\\uparrow\\) reduces \\(V_{GS}\\), reduces \\(I_D\\), and raises \\(V_{out}\\); therefore the overall amplifier is noninverting.\n\n## 2. Small-signal voltage gain\n\nFor small signals, \\(V_{DD}\\) is AC ground. The output-node conductance, including loading by the feedback divider, is\n\n\\[\nG_o=\\frac{1}{R_D}+\\frac{1}{R_\\Sigma},\n\\qquad\nR_o'=\\frac{1}{G_o}=R_D\\parallel (R_1+R_2).\n\\]\n\nThe drain current is\n\n\\[\ni_d=g_m(v_f-v_{in}).\n\\]\n\nKCL at the output gives\n\n\\[\nG_o v_{out}+g_m(v_f-v_{in})=0.\n\\]\n\nUsing \\(v_f=\\beta v_{out}\\),\n\n\\[\n\\boxed{\n\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m}{G_o+\\beta g_m}\n=\n\\frac{g_mR_o'}{1+\\beta g_mR_o'}\n}\n\\]\n\nThis can be written in standard feedback form as\n\n\\[\nA_0=g_mR_o',\\qquad T=\\beta A_0,\n\\]\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\\frac{A_0}{1+T}\n=\\frac{1}{\\beta}\\frac{T}{1+T}\n}\n\\]\n\nwhere \\(T\\) is the magnitude of the loop gain. The signed gate-to-output-to-gate loop gain is \\(-T\\), indicating negative feedback.\n\nIf the divider loading is negligible, \\(R_1+R_2\\gg R_D\\), then \\(R_o'\\simeq R_D\\), and\n\n\\[\n\\boxed{\nA_v\\simeq \\frac{g_mR_D}{1+\\beta g_mR_D}.\n}\n\\]\n\nFor large loop gain \\(T\\gg1\\),\n\n\\[\n\\boxed{\nA_v\\simeq \\frac{1}{\\beta}\n=1+\\frac{R_1}{R_2}.\n}\n\\]\n\nThus the closed-loop gain is primarily set by \\(R_1/R_2\\), and its sensitivity to \\(g_m\\) and \\(R_D\\) is reduced by \\(1+T\\).\n\n## 3. Feedback topology and terminal resistances\n\nThe circuit uses:\n\n- voltage sampling at the output, through \\(R_1,R_2\\);\n- series or differential voltage mixing at the input, since the transistor responds to \\(v_{gs}=v_f-v_{in}\\).\n\nHence it is a **series–shunt** or **voltage-series negative-feedback** amplifier.\n\nWith \\(\\lambda=\\gamma=0\\), the input resistance seen at the source is\n\n\\[\n\\boxed{\nR_{in}\\simeq \\frac{1+T}{g_m}\n}\n\\]\n\nso feedback increases it from the common-gate value \\(1/g_m\\).\n\nWith \\(v_{in}=0\\), the output resistance, including the loading of \\(R_1+R_2\\), is\n\n\\[\n\\boxed{\nR_{out}\\simeq\n\\frac{R_o'}{1+T}\n=\n\\left(G_o+\\beta g_m\\right)^{-1}.\n}\n\\]\n\nThus feedback lowers the output resistance by approximately \\(1+T\\).\n\n## 4. Finite \\(r_o\\) and body effect\n\nLet \\(g_o=1/r_o\\) and \\(g_{mb}\\) be the body-effect transconductance. If the body is at AC ground, the more general low-frequency gain is\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m+g_{mb}+g_o}\n{G_o+g_o+\\beta g_m}\n}\n\\]\n\nwith any external load included in \\(G_o\\). If the body is tied to the source, set \\(g_{mb}=0\\). With \\(g_o,g_{mb}\\ll g_m\\), this reduces to the result above.\n\nNo capacitors are shown, so the expressions are DC/midband results; high-frequency stability would require \\(C_{gs}\\), \\(C_{gd}\\), and other parasitic capacitances.",
        "format": "markdown",
        "sha256": "ca06ded16634f1e65b6fadefc9354ab530b493a2dfcc11a24efb31f738f09044"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback. Its closed-loop gain matches the golden result, including the divider loading and the high-loop-gain limit; the additional analyses are consistent.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1384,
        "output_tokens": 23793,
        "total_tokens": 25177,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22678,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1384,
        "output_tokens": 23793,
        "total_tokens": 25177,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22678,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nThis is an **NMOS source follower** or **common-drain stage**:\n\n- \\(M_1\\): source follower; drain at \\(V_{DD}\\), gate driven by \\(V_{\\text{in}}\\), source at \\(V_{\\text{out}}\\).\n- \\(M_2\\): biased current sink; gate held at a dc voltage \\(V_b\\), source at ground, drain at \\(V_{\\text{out}}\\).\n\nAssume \\(V_{DD}\\) and \\(V_b\\) are ac grounds, both devices are normally biased in saturation, and the MOSFET bodies are at ground. Thus \\(M_1\\) suffers body effect because \\(V_{SB1}=V_{\\text{out}}\\).\n\n---\n\n## 2. DC behavior\n\nLet\n\n\\[\n\\beta_i=\\mu_n C_{\\rm ox}\\left(\\frac WL\\right)_i,\\qquad\nV_{OV2}=V_b-V_{TH2}.\n\\]\n\nWith channel-length modulation,\n\n\\[\nI_1 \\approx \\frac{\\beta_1}{2}\n\\left[V_{\\text{in}}-V_{\\text{out}}-V_{TH1}(V_{\\text{out}})\\right]^2\n\\left[1+\\lambda_1(V_{DD}-V_{\\text{out}})\\right],\n\\]\n\n\\[\nI_2 \\approx \\frac{\\beta_2}{2}V_{OV2}^2(1+\\lambda_2V_{\\text{out}}).\n\\]\n\nAt dc, with no external load,\n\n\\[\nI_1=I_2.\n\\]\n\nNeglecting \\(\\lambda\\) first,\n\n\\[\nI_B \\approx \\frac{\\beta_2}{2}V_{OV2}^2,\n\\]\n\nand \\(M_1\\) must have overdrive\n\n\\[\nV_{OV1}=\\sqrt{\\frac{2I_B}{\\beta_1}}\n      =V_{OV2}\\sqrt{\\frac{\\beta_2}{\\beta_1}}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=V_{\\text{in}}-V_{TH1}(V_{\\text{out}})-V_{OV1}\n}\n\\]\n\nso the output follows the input with a positive dc level shift approximately equal to \\(V_{GS1}=V_{TH1}+V_{OV1}\\).\n\nBecause the body of \\(M_1\\) is at ground,\n\n\\[\nV_{TH1}(V_{\\text{out}})\n=\nV_{TH0}\n+\\gamma\\left[\n\\sqrt{2\\phi_F+V_{\\text{out}}}\n-\\sqrt{2\\phi_F}\n\\right],\n\\]\n\nso \\(V_{TH1}\\), and hence the required \\(V_{GS1}\\), increase as the output rises. If the body of \\(M_1\\) is tied to its source, this body-effect term disappears.\n\n---\n\n## 3. Regions of operation and output swing\n\nFor \\(M_2\\) to remain a current sink,\n\n\\[\nV_{DS2}=V_{\\text{out}}\\ge V_{OV2}.\n\\]\n\nThus the lower limit of the useful output range is approximately\n\n\\[\n\\boxed{V_{\\text{out,min}}\\approx V_{OV2}=V_b-V_{TH2}}.\n\\]\n\nFor \\(M_1\\),\n\n\\[\nV_{DS1}=V_{DD}-V_{\\text{out}},\n\\]\n\nand saturation requires\n\n\\[\nV_{DD}-V_{\\text{out}}\n\\ge\nV_{\\text{in}}-V_{\\text{out}}-V_{TH1},\n\\]\n\nor\n\n\\[\nV_{\\text{in}}\\le V_{DD}+V_{TH1}.\n\\]\n\nThus, for \\(V_{\\text{in}}\\le V_{DD}\\), \\(M_1\\) normally remains saturated. If \\(V_{\\text{in}}\\) is raised above approximately \\(V_{DD}+V_{TH1}\\), \\(M_1\\) enters triode.\n\nFor a maximum input \\(V_{\\text{in,max}}\\approx V_{DD}\\),\n\n\\[\n\\boxed{\nV_{\\text{out,max}}\n\\approx V_{DD}-V_{TH1}-V_{OV1}\n}\n\\]\n\nso this follower cannot swing to either rail. A rough headroom condition is\n\n\\[\nV_{DD}>V_{TH1}+V_{OV1}+V_{OV2}.\n\\]\n\nFor very low \\(V_{\\text{in}}\\), \\(M_1\\) is off and \\(M_2\\) pulls the output toward ground; \\(M_2\\) is then in triode.\n\n---\n\n## 4. Small-signal voltage gain\n\nDefine\n\n\\[\ng_{m1}=\\frac{\\partial I_1}{\\partial V_{GS1}},\\qquad\ng_{mb1}=\\frac{\\partial I_1}{\\partial V_{BS1}},\n\\]\n\n\\[\ng_{o1}=\\frac1{r_{o1}},\\qquad\ng_{o2}=\\frac1{r_{o2}},\\qquad\nG_L=\\frac1{R_L}.\n\\]\n\nSince \\(V_b\\) is an ideal ac ground, \\(v_{gs2}=0\\), so \\(g_{m2}\\) does not appear in the gain from \\(V_{\\text{in}}\\).\n\nThe small-signal KCL at the output is\n\n\\[\ng_{m1}(v_{\\text{in}}-v_{\\text{out}})\n-g_{mb1}v_{\\text{out}}\n-g_{o1}v_{\\text{out}}\n=\n(g_{o2}+G_L)v_{\\text{out}}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}+G_L}\n}\n\\]\n\nor, equivalently, with \\(R_X=r_{o1}\\parallel r_{o2}\\parallel R_L\\),\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_{m1}R_X}\n{1+(g_{m1}+g_{mb1})R_X}\n}.\n\\]\n\nHence the gain is:\n\n- positive and noninverting,\n- less than unity,\n- close to unity for large \\(g_{m1}R_X\\).\n\nFor \\(r_o\\to\\infty\\) and no load,\n\n\\[\n\\boxed{\nA_v=\\frac{g_{m1}}{g_{m1}+g_{mb1}}\n=\\frac{1}{1+\\eta}\n}\n\\]\n\nwhere\n\n\\[\n\\eta=\\frac{g_{mb1}}{g_{m1}}\n\\approx\n\\frac{\\gamma}\n{2\\sqrt{2\\phi_F+V_{SB1}}}.\n\\]\n\nIf body effect is also absent, \\(g_{mb1}=0\\) and the ideal low-frequency gain approaches 1. More generally,\n\n\\[\nA_v\\approx\n\\frac{1}\n{1+\\eta+(g_{o1}+g_{o2}+G_L)/g_{m1}}.\n\\]\n\nThus body effect, finite output resistance, and external loading all reduce the gain.\n\n---\n\n## 5. Input and output resistance\n\nAt low frequency the gate draws essentially no current:\n\n\\[\n\\boxed{R_{\\text{in}}\\approx\\infty}.\n\\]\n\nLooking into the output with \\(v_{\\text{in}}=0\\) and excluding an external load,\n\n\\[\n\\boxed{\nR_{\\text{out}}\n=\n\\frac{1}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n=\n\\frac{1}{g_{m1}+g_{mb1}}\n\\parallel r_{o1}\\parallel r_{o2}\n}\n\\]\n\nand usually\n\n\\[\n\\boxed{R_{\\text{out}}\\approx \\frac{1}{g_{m1}+g_{mb1}}\\approx\\frac1{g_{m1}}}.\n\\]\n\nWith a load \\(R_L\\),\n\n\\[\nA_v=g_{m1}(R_{\\text{out}}\\parallel R_L).\n\\]\n\nThus the circuit provides current gain and impedance transformation even though its voltage gain is less than one.\n\n---\n\n## 6. Bias, power, and dynamic behavior\n\nThe quiescent current and power are approximately\n\n\\[\nI_Q\\approx I_B,\\qquad P_Q\\approx V_{DD}I_B.\n\\]\n\nAlso,\n\n\\[\ng_{m1}\\approx\\frac{2I_B}{V_{OV1}},\\qquad\nr_{oi}\\approx\\frac{1}{\\lambda_i I_B}.\n\\]\n\nIncreasing \\(I_B\\) gives larger \\(g_{m1}\\), lower \\(R_{\\text{out}}\\), and higher bandwidth, at the cost of more static power.\n\nFor a dominant load capacitance \\(C_L\\), neglecting device parasitics,\n\n\\[\nA_v(s)\\approx\n\\frac{g_{m1}}\n{D+sC_L},\n\\qquad\nD=g_{m1}+g_{mb1}+g_{o1}+g_{o2}+G_L,\n\\]\n\nso\n\n\\[\n\\omega_p\\approx\\frac{D}{C_L}\n=\\frac{1}{(R_{\\text{out}}\\parallel R_L)C_L}.\n\\]\n\nThe source follower is therefore relatively wideband. Its \\(C_{gs1}\\) is also bootstrapped because the source follows the gate:\n\n\\[\nC_{\\text{in}}\\approx C_{gd1}+C_{gb1}+(1-A_v)C_{gs1},\n\\]\n\nwhich reduces the effective input capacitance when \\(A_v\\approx1\\).\n\nFinally, the large-signal drive is asymmetric: \\(M_1\\) can source additional current on a rising output transition, but the sinking current on a falling transition is limited by the bias current of \\(M_2\\), giving approximately\n\n\\[\n\\left|\\frac{dV_{\\text{out}}}{dt}\\right|_{\\text{falling}}\n\\lesssim \\frac{I_B}{C_L}.\n\\]\n\n---\n\n**Summary:** this is a noninverting NMOS source follower biased by an NMOS current sink. It gives \\(V_{\\text{out}}\\approx V_{\\text{in}}-V_{GS1}\\), a gain slightly below unity, high input resistance, low output resistance, limited output swing, and quiescent power \\(V_{DD}I_B\\).",
        "format": "markdown",
        "sha256": "e53543c9f5515f38d56d8b2843755f1d63acbb6f2d3e5a9a4b1f13e2a057867d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-sink load, and gives the positive, slightly sub-unity gain with an appropriate body-effect and output-resistance expression. The additional analysis is consistent with the essential result.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1003,
        "output_tokens": 25958,
        "total_tokens": 26961,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1003,
        "output_tokens": 25958,
        "total_tokens": 26961,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) and \\(M_2\\) are enhancement NMOS devices, with \\(V_{DD}\\) and \\(V_b\\) ideal dc sources. The bulks are normally tied to ground.\n\n## 1. Circuit function\n\n- \\(M_1\\): common-drain/source follower; drain at \\(V_{DD}\\), gate at \\(V_{in}\\), source at \\(V_{out}\\).\n- \\(M_2\\): biased current sink. Its gate and source are at small-signal ground, so it ideally supplies a constant current \\(I_Q\\).\n- The circuit is a noninverting voltage buffer with a dc level shift:\n  \\[\n  V_{out}\\approx V_{in}-V_{GS1}.\n  \\]\n\nIf \\(V_{in}\\) increases, \\(M_1\\) initially supplies more current than \\(M_2\\), charging the output node. \\(V_{out}\\) rises until \\(V_{GS1}\\) returns approximately to its required value. This source-node feedback gives nearly unity gain and low output resistance.\n\n---\n\n## 2. DC transfer characteristic\n\nLet\n\n\\[\n\\beta_i=\\mu_n C_{ox}\\left(\\frac WL\\right)_i,\\qquad\nV_{OV2}=V_b-V_{T2}.\n\\]\n\nWhen \\(M_2\\) is saturated,\n\n\\[\nI_2 \\simeq \\frac12\\beta_2V_{OV2}^2(1+\\lambda_2V_{out})=I_Q.\n\\]\n\nFor \\(M_1\\), its source-to-body voltage is \\(V_{SB1}=V_{out}\\), so body effect gives\n\n\\[\nV_{T1}(V_{out})=\nV_{T0}+\\gamma\\left(\\sqrt{2\\phi_F+V_{out}}-\\sqrt{2\\phi_F}\\right).\n\\]\n\nThus, in saturation,\n\n\\[\nI_1=\\frac12\\beta_1\n\\left[V_{in}-V_{out}-V_{T1}(V_{out})\\right]^2\n\\left[1+\\lambda_1(V_{DD}-V_{out})\\right].\n\\]\n\nFor an unloaded output, \\(I_1=I_2\\), giving\n\n\\[\nV_{in}=V_{out}+V_{T1}(V_{out})\n+\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,V_{OV2}\n\\sqrt{\\frac{1+\\lambda_2V_{out}}\n{1+\\lambda_1(V_{DD}-V_{out})}}.\n\\]\n\nNeglecting channel-length modulation,\n\n\\[\n\\boxed{V_{in}=V_{out}+V_{T1}(V_{out})+V_{OV1}},\n\\qquad\nV_{OV1}=\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,V_{OV2}.\n\\]\n\nIf body effect is also neglected,\n\n\\[\n\\boxed{V_{out}\\simeq V_{in}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{T2})}.\n\\]\n\nHence the output follows the input with a downward shift of approximately one \\(V_{GS}\\). Body effect makes \\(V_{T1}\\) increase with \\(V_{out}\\), so the dc transfer is slightly nonlinear. The quiescent current and power are approximately\n\n\\[\nI_Q\\simeq \\frac12\\beta_2(V_b-V_{T2})^2,\\qquad\nP_Q\\simeq V_{DD}I_Q.\n\\]\n\n---\n\n## 3. Small-signal voltage gain\n\nLet\n\n- \\(g_m=g_{m1}\\),\n- \\(g_{mb}=g_{mb1}\\) due to body effect,\n- \\(g_{o1}=1/r_{o1}\\), \\(g_{o2}=1/r_{o2}\\),\n- \\(G_L=1/R_L\\) for an external load.\n\nSince \\(V_{DD}\\), \\(V_b\\), and the source of \\(M_2\\) are ac grounds, \\(g_{m2}\\) does not appear in the low-frequency gain; only \\(r_{o2}\\) does.\n\nKCL at the output is\n\n\\[\ng_m(v_{in}-v_{out})\n=\n\\left(g_{mb}+g_{o1}+g_{o2}+G_L\\right)v_{out}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m}\n{g_m+g_{mb}+g_{o1}+g_{o2}+G_L}\n}\n\\]\n\nor, defining \\(R_X=r_{o1}\\parallel r_{o2}\\parallel R_L\\),\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_mR_X}\n{1+(g_m+g_{mb})R_X}\n}.\n\\]\n\nEquivalently,\n\n\\[\nA_v=\n\\frac{1}{\n1+\\dfrac{g_{mb}}{g_m}\n+\\dfrac{g_{o1}+g_{o2}+G_L}{g_m}\n}.\n\\]\n\nWith \\(g_{mb}\\simeq\\eta g_m\\),\n\n- ideal current source, no load, no body effect:\n  \\[\n  A_v\\simeq 1;\n  \\]\n- with body effect:\n  \\[\n  A_v\\simeq \\frac{1}{1+\\eta},\n  \\qquad\n  \\eta\\simeq\\frac{\\gamma}{2\\sqrt{2\\phi_F+V_{out}}},\n  \\]\n  typically giving \\(A_v\\sim0.7\\)–\\(0.95\\);\n- finite \\(r_{o1}\\), \\(r_{o2}\\), or a load reduces the gain further.\n\nIf the body of \\(M_1\\) can be tied to its source, \\(g_{mb}=0\\), and the gain and linearity improve.\n\n---\n\n## 4. Input and output resistances\n\nThe low-frequency input resistance is essentially infinite because the input drives a MOS gate.\n\nSetting \\(v_{in}=0\\) and applying a test source at the output gives\n\n\\[\n\\boxed{\nR_{out}\n=\n\\frac{1}{g_m+g_{mb}+g_{o1}+g_{o2}}\n=\n\\frac{1}{g_m+g_{mb}}\n\\parallel r_{o1}\\parallel r_{o2}\n\\approx \\frac{1}{g_m}\n}.\n\\]\n\nWith an external load, \\(R_{out,\\text{loaded}}=R_{out}\\parallel R_L\\).\n\n---\n\n## 5. Operating-range limits\n\nFor \\(M_2\\) to remain a saturated current sink,\n\n\\[\n\\boxed{V_{out}\\ge V_{OV2}=V_b-V_{T2}}.\n\\]\n\nBelow this voltage \\(M_2\\) enters triode and the bias current falls.\n\nFor \\(M_1\\) to conduct and remain saturated,\n\n\\[\nV_{in}-V_{out}>V_{T1}(V_{out}),\n\\]\n\\[\nV_{DD}-V_{out}\\ge V_{OV1}.\n\\]\n\nThe latter is equivalent, along the follower transfer curve, to approximately \\(V_{in}\\le V_{DD}+V_{T1}\\), so it is normally satisfied for \\(V_{in}\\le V_{DD}\\).\n\nThe constant-current follower region therefore starts approximately at\n\n\\[\nV_{out,\\min}\\simeq V_{OV2},\n\\]\n\\[\nV_{in,\\min}\\simeq V_{OV2}+V_{T1}(V_{OV2})+V_{OV1}.\n\\]\n\nAt the upper end, for \\(V_{in,\\max}=V_{DD}\\),\n\n\\[\nV_{out,\\max}+V_{T1}(V_{out,\\max})+V_{OV1}\\simeq V_{DD},\n\\]\n\nor, neglecting body effect,\n\n\\[\n\\boxed{V_{out,\\max}\\simeq V_{DD}-V_{T1}-V_{OV1}}.\n\\]\n\nThus the output cannot reach either supply rail. For very low \\(V_{in}\\), \\(M_1\\) is off and \\(V_{out}\\) goes toward ground.\n\n---\n\n### Summary\n\n\\[\n\\boxed{\nV_{out}\\approx V_{in}-V_{GS1},\\qquad\n0<A_v<1,\\qquad\nR_{in}\\to\\infty,\\qquad\nR_{out}\\approx\\frac1{g_{m1}}\n}\n\\]\n\nIt is a class-A source-follower buffer/level shifter. Its main limitations are the \\(V_{GS}\\) level shift, body-effect nonlinearity, finite \\(r_o\\), current-sink compliance voltage, reduced output swing, and—under capacitive loading—a falling slew rate limited roughly by \\(I_Q/C_L\\).",
        "format": "markdown",
        "sha256": "1d92915ac2b20ad9946d899193e13c4a7d66aaef4b636a2fba1f7dfaa048fcf3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, and derives a positive gain below unity with the expected body-effect and output-resistance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 1003,
        "output_tokens": 29547,
        "total_tokens": 30550,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27818,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 1003,
        "output_tokens": 29547,
        "total_tokens": 30550,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27818,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Since no device values are given, the circuit is best analyzed symbolically. The circuit is an **NMOS source follower / common-drain stage**:\n\n- \\(M_1\\): drain at \\(V_{DD}\\), gate driven by \\(V_{in}\\), source at \\(V_{out}\\).\n- \\(M_2\\): NMOS current sink biased by \\(V_b\\), sinking a roughly constant current from \\(V_{out}\\) to ground.\n- \\(V_b\\) is assumed to be an ideal dc bias, hence an ac ground.\n\n---\n\n## 1. DC operation\n\nAssume enhancement NMOS devices, square-law operation, no dc load, and first neglect channel-length modulation. Define\n\n\\[\n\\beta_i=\\mu_n C_{ox}\\left(\\frac WL\\right)_i,\\qquad\nV_{OV2}=V_b-V_{Tn2}>0\n\\]\n\nso that when \\(M_2\\) is saturated,\n\n\\[\nI_0 \\simeq \\frac{\\beta_2}{2}V_{OV2}^2 .\n\\]\n\nIf \\(M_1\\)’s body is tied to the common substrate/ground, its threshold is body-biased:\n\n\\[\nV_{T1}(V_{out})=\nV_{T0}+\\gamma\\left[\\sqrt{2\\phi_F+V_{out}}-\\sqrt{2\\phi_F}\\right].\n\\]\n\nIf the body of \\(M_1\\) is tied to its source, set \\(\\gamma=0\\) and \\(V_{T1}=V_{T0}\\).\n\n### Current and overdrive of \\(M_1\\)\n\nIn the normal operating region, \\(M_2\\) is saturated and forces\n\n\\[\nI_{D1}\\simeq I_0.\n\\]\n\nTherefore\n\n\\[\nV_{OV1}\n=\n\\sqrt{\\frac{2I_0}{\\beta_1}}\n=\nV_{OV2}\\sqrt{\\frac{\\beta_2}{\\beta_1}} .\n\\]\n\nThus \\(M_1\\)’s gate-source voltage is approximately fixed:\n\n\\[\nV_{GS1}=V_{T1}(V_{out})+V_{OV1}.\n\\]\n\nSince \\(V_{GS1}=V_{in}-V_{out}\\),\n\n\\[\n\\boxed{\nV_{in}=V_{out}+V_{T1}(V_{out})+V_{OV1}\n}\n\\]\n\nor, neglecting body effect,\n\n\\[\n\\boxed{\nV_{out}\\simeq V_{in}-V_{T0}-V_{OV1}.\n}\n\\]\n\nSo the output follows the input with a positive, near-unity slope but with a dc level shift of about one \\(V_{GS}\\).\n\n---\n\n## 2. Operating-region conditions\n\n### \\(M_2\\) saturation\n\nFor \\(M_2\\),\n\n\\[\nV_{DS2}=V_{out}, \\qquad V_{GS2}=V_b.\n\\]\n\nIt remains saturated if\n\n\\[\n\\boxed{\nV_{out}\\ge V_{OV2}=V_b-V_{Tn2}.\n}\n\\]\n\nBelow this voltage, \\(M_2\\) enters triode and the current sink no longer behaves ideally.\n\n### \\(M_1\\) saturation\n\nFor \\(M_1\\),\n\n\\[\nV_{DS1}=V_{DD}-V_{out},\\qquad\nV_{GS1}=V_{in}-V_{out}.\n\\]\n\nSaturation requires\n\n\\[\nV_{DS1}\\ge V_{GS1}-V_{T1}(V_{out}),\n\\]\n\nwhich simplifies to\n\n\\[\n\\boxed{\nV_{in}\\le V_{DD}+V_{T1}(V_{out}).\n}\n\\]\n\nFor ordinary rail-limited inputs \\(V_{in}\\le V_{DD}\\), \\(M_1\\) usually remains saturated.\n\n---\n\n## 3. Full large-signal transfer, qualitatively\n\nFor \\(V_{in}\\lesssim V_{T1}(0)\\), \\(M_1\\) is off and \\(M_2\\) pulls \\(V_{out}\\) near ground.\n\nFor small positive \\(V_{in}\\), \\(M_1\\) is saturated but \\(M_2\\) is still in triode. With \\(V_{out}<V_{OV2}\\),\n\n\\[\n\\frac{\\beta_1}{2}\n\\left[V_{in}-V_{out}-V_{T1}(V_{out})\\right]^2\n=\n\\beta_2\\left[\nV_{OV2}V_{out}-\\frac{V_{out}^2}{2}\n\\right].\n\\]\n\nIf body effect is neglected, define\n\n\\[\nA=V_{in}-V_{T0},\\qquad B=V_{OV2},\\qquad r=\\frac{\\beta_2}{\\beta_1}.\n\\]\n\nThen in the \\(M_2\\)-triode region,\n\n\\[\n\\boxed{\nV_{out}\n=\n\\frac{A+rB-\\sqrt{(A+rB)^2-(1+r)A^2}}{1+r}\n}\n\\]\n\nfor \\(0<V_{in}-V_{T0}<B(1+\\sqrt r)\\).\n\nOnce \\(V_{out}\\ge V_{OV2}\\), both devices are saturated and the simpler relation\n\n\\[\nV_{out}=V_{in}-V_{T1}(V_{out})-V_{OV1}\n\\]\n\napplies.\n\n---\n\n## 4. Output swing / headroom\n\nFor \\(M_2\\) to remain a good current sink,\n\n\\[\nV_{out}\\ge V_{OV2}.\n\\]\n\nFor a maximum input \\(V_{in}\\approx V_{DD}\\), the highest useful output is approximately\n\n\\[\n\\boxed{\nV_{out,\\max}\n\\simeq\nV_{DD}-V_{T1}(V_{out,\\max})-V_{OV1}.\n}\n\\]\n\nWithout body effect,\n\n\\[\n\\boxed{\nV_{out,\\max}\\simeq V_{DD}-V_{T0}-V_{OV1}.\n}\n\\]\n\nSo the output cannot reach \\(V_{DD}\\); it is limited by roughly one threshold plus \\(M_1\\)’s overdrive. The lower limit is set by \\(M_2\\)’s compliance voltage \\(V_{OV2}\\).\n\n---\n\n## 5. Small-signal voltage gain\n\nAt the bias point, define\n\n\\[\ng_{m1}=\\frac{2I_0}{V_{OV1}},\\qquad\ng_{mb1}=\\eta g_{m1},\n\\]\n\nwhere \\(\\eta\\approx dV_{T1}/dV_{SB}\\) is the body-effect factor. Also define\n\n\\[\ng_{o1}=\\frac1{r_{o1}}\\simeq \\lambda_1 I_0,\\qquad\ng_{o2}=\\frac1{r_{o2}}\\simeq \\lambda_2 I_0,\n\\]\n\nand \\(G_L=1/R_L\\) for an external load.\n\nWith \\(V_{DD}\\) and \\(V_b\\) as ac grounds, small-signal KCL at \\(V_{out}\\) gives\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}+G_L}\n}\n\\]\n\nor\n\n\\[\n\\boxed{\nA_v\n=\n\\frac{1}\n{1+\\eta+\\dfrac{g_{o1}+g_{o2}+G_L}{g_{m1}}}\n<1.\n}\n\\]\n\nIf \\(M_1\\)’s body is tied to its source, then \\(g_{mb1}=0\\), \\(\\eta=0\\), and for large \\(r_o\\)’s and no load,\n\n\\[\nA_v\\approx 1.\n\\]\n\nWith body effect and finite \\(r_o\\), the gain is typically slightly below unity.\n\nIf \\(V_b\\) has small-signal noise \\(v_b\\), or \\(V_{DD}\\) has ripple \\(v_{dd}\\),\n\n\\[\n\\bigl(g_{m1}+g_{mb1}+g_{o1}+g_{o2}+G_L\\bigr)v_{out}\n=\ng_{m1}v_{in}+g_{o1}v_{dd}-g_{m2}v_b .\n\\]\n\nThus a clean \\(V_b\\) is important; bias noise couples through \\(g_{m2}\\).\n\n---\n\n## 6. Input and output resistance\n\nThe low-frequency input resistance is essentially infinite:\n\n\\[\n\\boxed{R_{in}\\approx \\infty}\n\\]\n\nbecause the input is a MOS gate.\n\nLooking into the output with \\(v_{in}=0\\),\n\n\\[\n\\boxed{\nR_{out}\n=\n\\frac{1}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n=\n\\left[\\frac{1}{g_{m1}+g_{mb1}}\\right]\n\\parallel r_{o1}\\parallel r_{o2}.\n}\n\\]\n\nOften,\n\n\\[\n\\boxed{\nR_{out}\\approx \\frac{1}{g_{m1}+g_{mb1}}\\approx \\frac{1}{g_{m1}}\n}\n\\]\n\nif body effect and \\(r_o\\) are neglected.\n\nWith a load, the effective output resistance is \\(R_{out}\\parallel R_L\\).\n\n---\n\n## 7. Main conclusions\n\n- This is a **non-inverting NMOS source follower** with an active current-sink load.\n- \\(V_{out}\\) follows \\(V_{in}\\) with a dc shift of approximately \\(V_{GS1}\\).\n- Voltage gain is positive and close to, but less than, unity:\n\n\\[\nA_v\\approx \\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}.\n\\]\n\n- Input resistance is very high; output resistance is low, approximately \\(1/g_{m1}\\).\n- Body effect in \\(M_1\\), finite \\(r_o\\), and loading reduce the gain.\n- The useful output swing is limited below by \\(V_{OV2}\\) and above by roughly \\(V_{DD}-V_{T1}-V_{OV1}\\).\n- Static current is set by \\(V_b\\): \\(I_D\\approx I_0\\), so static power is approximately \\(V_{DD}I_0\\).",
        "format": "markdown",
        "sha256": "0fdbc436680aed0b28b2464a094c490e54762f38f6631c31e075c7310937f9bc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, with positive gain slightly below unity. The small-signal expression and device-role analysis are consistent with the golden solution.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 1003,
        "output_tokens": 28720,
        "total_tokens": 29723,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26670,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 1003,
        "output_tokens": 28720,
        "total_tokens": 29723,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26670,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nThe circuit is a **static complementary CMOS inverter**:\n\n- \\(M_1\\): enhancement-mode NMOS pull-down device, source at ground.\n- \\(M_2\\): enhancement-mode PMOS pull-up device, source at \\(V_{DD}\\).\n- Their gates are connected to \\(V_{\\text{in}}\\), and their drains are connected to \\(V_{\\text{out}}\\).\n\nThus, in positive logic,\n\n\\[\n\\boxed{V_{\\text{out}}=\\overline{V_{\\text{in}}}}\n\\]\n\n| \\(V_{\\text{in}}\\) | \\(M_1\\) NMOS | \\(M_2\\) PMOS | \\(V_{\\text{out}}\\) |\n|---|---|---|---|\n| 0 (logic 0) | OFF | ON | \\(V_{DD}\\) |\n| \\(V_{DD}\\) (logic 1) | ON | OFF | 0 |\n\nAt either valid logic level one transistor is OFF, so the ideal DC supply current is zero; only leakage current remains.\n\n---\n\n## 2. Square-law DC analysis\n\nLet\n\n\\[\nV_{Tn}>0,\\qquad V_{Tp}=|V_{TP}|>0\n\\]\n\nwhere \\(V_{Tp}\\) is the magnitude of the PMOS threshold. Define\n\n\\[\n\\beta_n=\\mu_n C_{\\rm ox}\\left(\\frac WL\\right)_n,\\qquad\n\\beta_p=\\mu_p C_{\\rm ox}\\left(\\frac WL\\right)_p.\n\\]\n\nAssume long-channel square-law operation, no channel-length modulation, no body effect, and no DC output load. Also define\n\n\\[\na=v_i-V_{Tn},\\qquad b=V_{DD}-v_i-V_{Tp},\n\\]\n\nwith \\(v_i=V_{\\text{in}}\\), \\(v_o=V_{\\text{out}}\\). Normally \\(V_{Tn}+V_{Tp}<V_{DD}\\).\n\n### NMOS current \\(I_n\\)\n\n\\[\nI_n=\n\\begin{cases}\n0, & a\\le 0,\\\\[2mm]\n\\beta_n\\left(av_o-\\dfrac{v_o^2}{2}\\right), & a>0,\\;v_o<a\n\\quad\\text{(triode)},\\\\[2mm]\n\\dfrac{\\beta_n}{2}a^2, & a>0,\\;v_o\\ge a\n\\quad\\text{(saturation)}.\n\\end{cases}\n\\]\n\n### PMOS current magnitude \\(I_p\\)\n\nWith \\(V_{SD}=V_{DD}-v_o\\),\n\n\\[\nI_p=\n\\begin{cases}\n0, & b\\le0,\\\\[2mm]\n\\beta_p\\left[b(V_{DD}-v_o)-\\dfrac{(V_{DD}-v_o)^2}{2}\\right],\n& b>0,\\;V_{DD}-v_o<b\n\\quad\\text{(triode)},\\\\[2mm]\n\\dfrac{\\beta_p}{2}b^2,\n& b>0,\\;V_{DD}-v_o\\ge b\n\\quad\\text{(saturation)}.\n\\end{cases}\n\\]\n\nAt DC, KCL at the output gives\n\n\\[\n\\boxed{I_n=I_p}.\n\\]\n\n---\n\n## 3. Voltage-transfer characteristic\n\nAs \\(V_{\\text{in}}\\) increases, the inverter passes through five operating regions.\n\n### Region I: \\(v_i\\le V_{Tn}\\)\n\nThe NMOS is OFF and the PMOS charges the output to \\(V_{DD}\\):\n\n\\[\n\\boxed{v_o=V_{DD}},\\qquad I_D=0.\n\\]\n\nThe PMOS is technically in triode with \\(V_{SD}=0\\).\n\n### Region II: \\(V_{Tn}<v_i<V_M\\)\n\nNMOS: saturation; PMOS: triode. Let \\(q=\\beta_n/\\beta_p\\). Equating currents gives\n\n\\[\n\\boxed{\nv_o=v_i+V_{Tp}\n+\\sqrt{b^2-q\\,a^2}\n}\n\\]\n\nor explicitly,\n\n\\[\nv_o=v_i+V_{Tp}\n+\\sqrt{\n(V_{DD}-v_i-V_{Tp})^2\n-\\frac{\\beta_n}{\\beta_p}(v_i-V_{Tn})^2\n}.\n\\]\n\nThe output begins to fall from \\(V_{DD}\\).\n\n### Region III: switching region, \\(v_i=V_M\\)\n\nBoth devices are saturated, so\n\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{Tn})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-V_{Tp})^2.\n\\]\n\nTherefore the switching threshold is\n\n\\[\n\\boxed{\nV_M=\n\\frac{V_{Tn}+\\rho\\,(V_{DD}-V_{Tp})}{1+\\rho},\n\\qquad\n\\rho=\\sqrt{\\frac{\\beta_p}{\\beta_n}}\n}\n\\]\n\nor equivalently,\n\n\\[\nV_M=\nV_{Tn}+\n\\frac{V_{DD}-V_{Tn}-V_{Tp}}\n{1+\\sqrt{\\beta_n/\\beta_p}}.\n\\]\n\nFor the symmetric case \\(\\beta_n=\\beta_p\\) and \\(V_{Tn}=V_{Tp}\\),\n\n\\[\n\\boxed{V_M=V_{DD}/2}.\n\\]\n\nA stronger NMOS (\\(\\beta_n>\\beta_p\\)) moves \\(V_M\\) below \\(V_{DD}/2\\); a stronger PMOS moves it above \\(V_{DD}/2\\). Because \\(\\mu_n>\\mu_p\\), the PMOS is usually made wider to obtain \\(\\beta_n\\approx\\beta_p\\).\n\nWith \\(\\lambda=0\\), currents in saturation do not depend on \\(v_o\\). Hence at \\(v_i=V_M\\),\n\n\\[\nV_M-V_{Tn}\\le v_o\\le V_M+V_{Tp}\n\\]\n\nis an ideal vertical, multivalued portion of the VTC. Real channel-length modulation makes it a unique, very steep curve.\n\nThe maximum direct-path current is approximately\n\n\\[\n\\boxed{\nI_{\\rm sc,max}\n=\\frac{\\beta_n}{2}(V_M-V_{Tn})^2\n=\\frac{\\beta_p}{2}(V_{DD}-V_M-V_{Tp})^2\n}.\n\\]\n\n### Region IV: \\(V_M<v_i<V_{DD}-V_{Tp}\\)\n\nNMOS: triode; PMOS: saturation. With \\(p=\\beta_p/\\beta_n\\),\n\n\\[\n\\boxed{\nv_o=a-\\sqrt{a^2-p\\,b^2}\n}\n\\]\n\nor\n\n\\[\nv_o=v_i-V_{Tn}\n-\\sqrt{\n(v_i-V_{Tn})^2\n-\\frac{\\beta_p}{\\beta_n}(V_{DD}-v_i-V_{Tp})^2\n}.\n\\]\n\nThe output continues falling toward zero.\n\n### Region V: \\(v_i\\ge V_{DD}-V_{Tp}\\)\n\nThe PMOS is OFF and the NMOS pulls the output to ground:\n\n\\[\n\\boxed{v_o=0},\\qquad I_D=0.\n\\]\n\nThe NMOS is in triode with \\(V_{DS}=0\\).\n\n---\n\n## 4. Noise margins\n\nFor the square-law model, \\(V_{IL}\\) and \\(V_{IH}\\) are the points where\n\n\\[\n\\frac{dv_o}{dv_i}=-1.\n\\]\n\nDefine\n\n\\[\ns(q)=\\frac{q+2\\sqrt{q(q+3)}}{3}.\n\\]\n\nThen, with \\(q=\\beta_n/\\beta_p\\) and \\(p=\\beta_p/\\beta_n\\),\n\n\\[\nV_{IL}=\n\\frac{V_{DD}-V_{Tp}+s(q)V_{Tn}}{1+s(q)},\n\\]\n\n\\[\nV_{IH}=\n\\frac{V_{Tn}+s(p)(V_{DD}-V_{Tp})}{1+s(p)}.\n\\]\n\nSince \\(V_{OH}=V_{DD}\\) and \\(V_{OL}=0\\),\n\n\\[\n\\boxed{NM_L=V_{IL}},\\qquad\n\\boxed{NM_H=V_{DD}-V_{IH}}.\n\\]\n\nFor a symmetric inverter, \\(V_{Tn}=V_{Tp}=V_T\\), \\(\\beta_n=\\beta_p\\):\n\n\\[\nV_{IL}=\\frac{3V_{DD}+2V_T}{8},\n\\qquad\nV_{IH}=\\frac{5V_{DD}-2V_T}{8},\n\\]\n\n\\[\nNM_L=NM_H=\\frac{3V_{DD}+2V_T}{8}.\n\\]\n\n---\n\n## 5. Practical considerations\n\n- With finite channel-length modulation, in the both-saturated region,\n\n\\[\n\\frac{\\beta_n}{2}a^2(1+\\lambda_n v_o)\n=\n\\frac{\\beta_p}{2}b^2[1+\\lambda_p(V_{DD}-v_o)],\n\\]\n\nwhich gives a finite negative gain approximately\n\n\\[\nA_v\\approx\n-\\frac{g_{mn}+g_{mp}}{g_{dsn}+g_{dsp}}.\n\\]\n\nThus the inverter has high small-signal gain near \\(V_M\\).\n\n- At valid logic levels, static power is essentially zero. For an intermediate DC input or during finite-slew transitions, both devices conduct and produce short-circuit current.\n- A rising input discharges the load capacitance through \\(M_1\\); a falling input charges it through \\(M_2\\). Propagation delay depends on \\(\\beta_n,\\beta_p\\) and the load capacitance, approximately \\(t_p\\sim0.69R_{\\rm eq}C_L\\).\n- Capacitive switching power is approximately \\(P_{\\rm dyn}=\\alpha_{\\rm sw}C_LV_{DD}^2f\\), with additional short-circuit and leakage power.\n\nHence the circuit is a high-gain, low-static-power CMOS inverter whose exact transfer curve is set mainly by the threshold voltages and the ratio \\(\\beta_n/\\beta_p\\).",
        "format": "markdown",
        "sha256": "580356e4a48ce49f95a3a11a84fdf219b6a448ffa34fbf699d6d4d26b8510c37"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and their complementary operation. The additional analysis is consistent with the circuit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 265,
        "output_tokens": 24176,
        "total_tokens": 24441,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22241,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 265,
        "output_tokens": 24176,
        "total_tokens": 24441,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22241,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nThe circuit is a **static CMOS inverter**:\n\n- \\(M_1\\): enhancement NMOS, source/body at ground.\n- \\(M_2\\): enhancement PMOS, source/body at \\(V_{DD}\\).\n- The gates are connected to \\(v_{in}\\), and the drains are connected to \\(v_{out}\\).\n\nAssume enhancement-mode long-channel devices, no dc load, and\n\n\\[\nV_{DD}>V_{TN}+|V_{TP}|.\n\\]\n\nLet \\(V_{TP}=|V_{Tp}|>0\\) and\n\n\\[\n\\beta_n=\\mu_nC_{ox}\\frac{W_n}{L_n},\\qquad\n\\beta_p=\\mu_pC_{ox}\\frac{W_p}{L_p},\n\\]\n\nwith \\(I_{D,\\text{sat}}=\\tfrac12\\beta V_{OV}^2\\).\n\n---\n\n## 2. Logic operation\n\n| \\(v_{in}\\) | \\(M_1\\), NMOS | \\(M_2\\), PMOS | \\(v_{out}\\) |\n|---|---|---|---|\n| \\(0\\) | OFF, \\(V_{GS}=0\\) | ON, \\(V_{SG}=V_{DD}\\) | \\(V_{DD}\\) |\n| \\(V_{DD}\\) | ON, \\(V_{GS}=V_{DD}\\) | OFF, \\(V_{SG}=0\\) | \\(0\\) |\n\nThus\n\n\\[\n\\boxed{v_{out}=\\overline{v_{in}}}\n\\]\n\nwith rail-to-rail outputs:\n\n\\[\nV_{OH}=V_{DD},\\qquad V_{OL}=0.\n\\]\n\nAt either stable logic level, one transistor has zero drain-source voltage, so the dc supply current is ideally zero. Only leakage current flows. During a transition, however,\n\n\\[\nV_{TN}<v_{in}<V_{DD}-V_{TP}\n\\]\n\ncauses both devices to conduct, producing a direct \\(V_{DD}\\)-to-ground short-circuit current.\n\n---\n\n## 3. DC transfer characteristic\n\nDefine \\(I_n>0\\) as the current from \\(v_{out}\\) toward ground and \\(I_p>0\\) as the current from \\(V_{DD}\\) into \\(v_{out}\\). At dc,\n\n\\[\n\\boxed{I_p=I_n}\n\\]\n\nfor an unloaded output.\n\n### NMOS \\(M_1\\)\n\n\\[\nI_{n,\\text{tri}}=\n\\beta_n\\left[(v_{in}-V_{TN})v_{out}-\\frac{v_{out}^2}{2}\\right],\n\\]\n\nwhen \\(v_{in}>V_{TN}\\) and \\(v_{out}<v_{in}-V_{TN}\\), and\n\n\\[\nI_{n,\\text{sat}}=\\frac{\\beta_n}{2}(v_{in}-V_{TN})^2\n\\]\n\nwhen \\(v_{out}\\ge v_{in}-V_{TN}\\).\n\nIt is cut off for \\(v_{in}\\le V_{TN}\\).\n\n### PMOS \\(M_2\\)\n\nLet\n\n\\[\nA=V_{DD}-v_{in}-V_{TP},\\qquad x=V_{DD}-v_{out}.\n\\]\n\nThen\n\n\\[\nI_{p,\\text{tri}}=\\beta_p\\left(Ax-\\frac{x^2}{2}\\right)\n\\]\n\nwhen \\(v_{out}>v_{in}+V_{TP}\\), and\n\n\\[\nI_{p,\\text{sat}}=\\frac{\\beta_p}{2}\n\\left(V_{DD}-v_{in}-V_{TP}\\right)^2\n\\]\n\nwhen \\(v_{out}\\le v_{in}+V_{TP}\\).\n\nIt is cut off for \\(v_{in}\\ge V_{DD}-V_{TP}\\).\n\nAs \\(v_{in}\\) rises, the usual five operating regions are:\n\n1. \\(M_1\\) off, \\(M_2\\) triode: \\(v_{out}=V_{DD}\\).\n2. \\(M_1\\) saturated, \\(M_2\\) triode: output begins to fall.\n3. Both saturated: high-gain, nearly vertical transition.\n4. \\(M_1\\) triode, \\(M_2\\) saturated: output approaches zero.\n5. \\(M_1\\) triode/on, \\(M_2\\) off: \\(v_{out}=0\\).\n\nThe result is a monotonically decreasing, inverter-like S-curve.\n\n---\n\n## 4. Switching threshold\n\nThe logic switching point is usually defined by \\(v_{in}=v_{out}=V_M\\). At this point both devices are on and saturated, so\n\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-V_{TP})^2.\n\\]\n\nHence\n\n\\[\n\\boxed{\nV_M=\n\\frac{V_{TN}+\n\\sqrt{\\beta_p/\\beta_n}\\,(V_{DD}-V_{TP})}\n{1+\\sqrt{\\beta_p/\\beta_n}}\n}\n\\]\n\nor equivalently, with \\(q=\\sqrt{\\beta_n/\\beta_p}\\),\n\n\\[\nV_M=\\frac{V_{DD}-V_{TP}+qV_{TN}}{1+q}.\n\\]\n\nFor a symmetric inverter,\n\n\\[\n\\beta_n=\\beta_p,\\qquad V_{TN}=V_{TP},\n\\]\n\nso\n\n\\[\n\\boxed{V_M=\\frac{V_{DD}}{2}}.\n\\]\n\nA stronger NMOS shifts \\(V_M\\) downward; a stronger PMOS shifts it upward. Because \\(\\mu_n\\) is typically \\(2\\!-\\!3\\) times \\(\\mu_p\\), the PMOS is usually made proportionally wider to obtain approximately equal pull-up and pull-down strengths.\n\nIf the input is held at \\(V_M\\), the dc short-circuit current is approximately\n\n\\[\nI_{SC}=\\frac{\\beta_n}{2}(V_M-V_{TN})^2\n      =\\frac{\\beta_p}{2}(V_{DD}-V_M-V_{TP})^2,\n\\]\n\ngiving \\(P_{DC}=V_{DD}I_{SC}\\).\n\n---\n\n## 5. Gain near the transition\n\nNear \\(V_M\\), both transistors operate as common-source stages, with \\(V_{DD}\\) acting as ac ground. Their transconductances add:\n\n\\[\n\\boxed{\nA_v \\approx -(g_{mn}+g_{mp})\n\\left(r_{on}\\parallel r_{op}\\parallel R_L\\right)\n}\n\\]\n\nor, without a resistive load,\n\n\\[\nA_v\\approx\n-\\frac{g_{mn}+g_{mp}}{g_{dsn}+g_{dsp}}.\n\\]\n\nThus the circuit can also be used as a high-gain inverting amplifier when biased near \\(V_M\\). With ideal square-law devices and \\(\\lambda=0\\), the saturated currents do not depend on \\(v_{out}\\), giving an ideal vertical VTC and formally infinite gain. Channel-length modulation makes the gain finite.\n\nFor the ideal symmetric square-law model, the unity-gain points and noise margins are\n\n\\[\nV_{IL}=\\frac{3V_{DD}+2V_T}{8},\\qquad\nV_{IH}=\\frac{5V_{DD}-2V_T}{8},\n\\]\n\n\\[\nNM_L=V_{IL},\\qquad NM_H=V_{DD}-V_{IH}\n=\\frac{3V_{DD}+2V_T}{8}.\n\\]\n\nReal values require channel-length modulation, velocity saturation, and process parameters.\n\n---\n\n## 6. Switching behavior and power\n\nFor a capacitive load \\(C_L\\),\n\n\\[\nC_L\\frac{dv_{out}}{dt}=I_p-I_n.\n\\]\n\n- Falling output: \\(M_1\\) discharges \\(C_L\\); \\(t_{PHL}\\) depends mainly on \\(\\beta_n\\).\n- Rising output: \\(M_2\\) charges \\(C_L\\); \\(t_{PLH}\\) depends mainly on \\(\\beta_p\\).\n- Choosing \\(\\beta_n\\approx\\beta_p\\) gives approximately symmetric delays.\n\nTotal power is approximately\n\n\\[\n\\boxed{\nP \\approx \\alpha C_LV_{DD}^2 f\n+P_{\\text{short-circuit}}\n+V_{DD}I_{\\text{leak}}\n}\n\\]\n\nwhile static power at either stable logic level is ideally zero.\n\nIf \\(V_{DD}<V_{TN}+V_{TP}\\), there is an input interval in which both devices are off and the output becomes high impedance, retaining charge on its capacitance rather than switching reliably.",
        "format": "markdown",
        "sha256": "0646c44281d35bb88fb453ff1c2682acb886e36f68555b330f8a01a4047bf79a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the standard CMOS inverter, with an NMOS pull-down and PMOS pull-up, and describes its logic operation consistently. The additional analysis does not contradict the inverter’s operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 192,
        "input_tokens": 265,
        "output_tokens": 27369,
        "total_tokens": 27634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 192,
        "input_tokens": 265,
        "output_tokens": 27369,
        "total_tokens": 27634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume enhancement-mode devices, with the body of nMOS \\(M_1\\) at ground and the body of pMOS \\(M_2\\) at \\(V_{DD}\\), and no external dc load. The circuit is the basic **CMOS inverter**. It also acts as a high-gain inverting amplifier when biased near its switching point.\n\nLet\n\n\\[\n\\beta_n=\\mu_n C_{\\rm ox}\\left(\\frac WL\\right)_1,\\qquad\n\\beta_p=\\mu_p C_{\\rm ox}\\left(\\frac WL\\right)_2,\n\\]\n\nwith \\(I_D=\\tfrac12\\beta V_{OV}^2\\) in saturation.\n\n## 1. DC operation\n\nThe terminal voltages are\n\n\\[\n\\begin{aligned}\nM_1:&\\quad V_{GS1}=V_{in},\\qquad V_{DS1}=V_{out},\\\\\nM_2:&\\quad V_{SG2}=V_{DD}-V_{in},\\qquad\nV_{SD2}=V_{DD}-V_{out}.\n\\end{aligned}\n\\]\n\nThus:\n\n| Input | \\(M_1\\), nMOS | \\(M_2\\), pMOS | Output |\n|---|---|---|---|\n| \\(V_{in}<V_{Tn}\\) | OFF | ON, charging \\(V_{out}\\) | \\(V_{out}\\simeq V_{DD}\\) |\n| \\(V_{in}>V_{DD}-|V_{Tp}|\\) | ON, discharging \\(V_{out}\\) | OFF | \\(V_{out}\\simeq0\\) |\n| Intermediate | ON | ON | Transition, with direct supply current |\n\nTherefore,\n\n\\[\n\\boxed{V_{out}=\\overline{V_{in}}}\n\\]\n\nwith rail-to-rail logic levels: \\(V_{OH}\\approx V_{DD}\\), \\(V_{OL}\\approx0\\). At either stable logic state, one transistor is cut off, so the ideal static current and power are zero. Both conduct only during switching, producing short-circuit current.\n\n## 2. Large-signal transfer characteristic\n\nDefine\n\n\\[\na_n=V_{in}-V_{Tn},\\qquad\na_p=V_{DD}-V_{in}-|V_{Tp}|.\n\\]\n\nFor the square-law model, neglecting channel-length modulation,\n\n\\[\nI_n=\n\\begin{cases}\n0, & a_n\\le0,\\\\[2mm]\n\\beta_n\\!\\left(a_nV_{out}-\\dfrac{V_{out}^2}{2}\\right),\n&0<V_{out}<a_n \\quad\\text{(triode)},\\\\[2mm]\n\\dfrac{\\beta_n}{2}a_n^2,\n&V_{out}\\ge a_n \\quad\\text{(saturation)},\n\\end{cases}\n\\]\n\nand, with \\(z=V_{DD}-V_{out}\\),\n\n\\[\nI_p=\n\\begin{cases}\n0, & a_p\\le0,\\\\[2mm]\n\\beta_p\\!\\left(a_pz-\\dfrac{z^2}{2}\\right),\n&0<z<a_p \\quad\\text{(triode)},\\\\[2mm]\n\\dfrac{\\beta_p}{2}a_p^2,\n&z\\ge a_p \\quad\\text{(saturation)}.\n\\end{cases}\n\\]\n\nThe dc output satisfies \\(I_n=I_p\\).\n\nAs \\(V_{in}\\) increases:\n\n1. \\(V_{in}<V_{Tn}\\): \\(M_1\\) off, \\(V_{out}=V_{DD}\\).\n2. \\(V_{Tn}<V_{in}<V_M\\): \\(M_1\\) saturated, \\(M_2\\) triode.\n3. Near \\(V_{in}=V_M\\): both saturated; the output falls very rapidly.\n4. \\(V_M<V_{in}<V_{DD}-|V_{Tp}|\\): \\(M_1\\) triode, \\(M_2\\) saturated.\n5. \\(V_{in}>V_{DD}-|V_{Tp}|\\): \\(M_2\\) off, \\(V_{out}=0\\).\n\nFor \\(\\lambda=0\\), the two sloping portions of the VTC are\n\n\\[\nV_{out}=V_{in}+|V_{Tp}|\n+\\sqrt{a_p^2-\\frac{\\beta_n}{\\beta_p}a_n^2},\n\\qquad V_{Tn}<V_{in}<V_M,\n\\]\n\nand\n\n\\[\nV_{out}=a_n-\n\\sqrt{a_n^2-\\frac{\\beta_p}{\\beta_n}a_p^2},\n\\qquad V_M<V_{in}<V_{DD}-|V_{Tp}|.\n\\]\n\n### Switching threshold\n\nIn the steep region both devices are saturated, so equating their currents gives\n\n\\[\n\\sqrt{\\beta_n}\\,(V_M-V_{Tn})\n=\n\\sqrt{\\beta_p}\\,(V_{DD}-V_M-|V_{Tp}|),\n\\]\n\nhence\n\n\\[\n\\boxed{\nV_M=\n\\frac{\\sqrt{\\beta_n}V_{Tn}\n+\\sqrt{\\beta_p}(V_{DD}-|V_{Tp}|)}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n}\n\\]\n\nand the conventional switching point is \\(V_{in}=V_{out}=V_M\\).\n\nFor matched thresholds and equal drive strengths,\n\n\\[\n\\boxed{V_M=\\frac{V_{DD}}2}.\n\\]\n\nA stronger nMOS lowers \\(V_M\\); a stronger pMOS raises it. Since \\(\\mu_n\\) is usually two to three times \\(\\mu_p\\), a symmetrically sized inverter generally needs \\(W_p/W_n\\approx\\mu_n/\\mu_p\\).\n\nWith ideal \\(\\lambda=0\\), the both-saturated section is a vertical, indeterminate segment because both currents are independent of \\(V_{out}\\). Channel-length modulation makes it a steep but finite-slope transition.\n\n## 3. Small-signal behavior near \\(V_M\\)\n\nBias \\(V_{in}\\) near \\(V_M\\), where both devices are saturated. A positive \\(v_{in}\\):\n\n- increases the nMOS pull-down current;\n- decreases the pMOS pull-up current.\n\nBoth effects lower \\(v_{out}\\), so their transconductances add. Therefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=-\\frac{g_{mn}+g_{mp}}{g_{on}+g_{op}}\n=-(g_{mn}+g_{mp})(r_{o1}\\parallel r_{o2})\n}\n\\]\n\nwhere \\(g_{mp}\\) is the magnitude of the pMOS transconductance. Also,\n\n\\[\n\\boxed{r_{out}=r_{o1}\\parallel r_{o2}},\\qquad\nr_{in}\\rightarrow\\infty \\text{ at dc}.\n\\]\n\nIf \\(I_{Dn}=I_{Dp}=I_D\\),\n\n\\[\ng_{on}+g_{op}\\simeq I_D(\\lambda_n+\\lambda_p),\n\\]\n\nso the large gain is limited mainly by channel-length modulation and output loading. If \\(\\lambda=0\\), the ideal model predicts infinite dc gain. With a capacitive load \\(C_L\\),\n\n\\[\nA_v(s)\\approx\n-\\frac{g_{mn}+g_{mp}}\n{g_{on}+g_{op}+sC_L}.\n\\]\n\n## 4. Digital remarks\n\n- High input impedance and rail-to-rail output swing.\n- Nearly zero static power at stable logic levels.\n- Short-circuit power during input transitions.\n- Dynamic power with a capacitive load is approximately \\(\\alpha C_LV_{DD}^2f\\).\n- \\(V_{IL}\\) and \\(V_{IH}\\) are the points where \\(dV_{out}/dV_{in}=-1\\), giving\n  \\(NM_L=V_{IL}-V_{OL}\\) and \\(NM_H=V_{OH}-V_{IH}\\).\n\nThe above assumes \\(V_{DD}>V_{Tn}+|V_{Tp}|\\). At very low supply voltages there can be an input interval in which both devices are off, leaving the output temporarily high-impedance and dependent on stored charge.",
        "format": "markdown",
        "sha256": "80d4534e8bf1352410839b6d2c5348747afdcdf5cb28d5d00e6c8168bb522379"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up. Its operating description and inverting small-signal behavior are consistent with the circuit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 192,
        "input_tokens": 265,
        "output_tokens": 20996,
        "total_tokens": 21261,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19390,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 192,
        "input_tokens": 265,
        "output_tokens": 20996,
        "total_tokens": 21261,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19390,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The interpretation depends on the MOSFET symbols. If \\(M_1\\) is the usual pMOS pull-up and \\(M_2\\) the nMOS pull-down, the circuit is the standard **CMOS inverter**. If both symbols indicate enhancement nMOS devices, the circuit behaves quite differently; that case is discussed at the end.\n\n## 1. Standard CMOS interpretation\n\nAssume:\n\n- \\(M_1\\): pMOS, source/body at \\(V_{DD}\\), drain at \\(V_{\\text{out}}\\)\n- \\(M_2\\): nMOS, source/body at ground, drain at \\(V_{\\text{out}}\\)\n- Gates tied to \\(V_{\\text{in}}\\)\n- Output has no dc load, only capacitance\n- \\(V_{Tn}>0\\), \\(V_{Tp}<0\\), and \\(V_{TP}=|V_{Tp}|\\)\n\n### On/off conditions\n\n\\[\nM_2\\text{ ON}\\iff V_{\\text{in}}>V_{Tn}\n\\]\n\n\\[\nM_1\\text{ ON}\\iff V_{SG1}=V_{DD}-V_{\\text{in}}>V_{TP}\n\\iff V_{\\text{in}}<V_{DD}-V_{TP}\n\\]\n\n| Input | \\(M_1\\) pMOS | \\(M_2\\) nMOS | Steady-state output |\n|---|---|---|---|\n| \\(V_{\\text{in}}=0\\) | ON | OFF | \\(V_{\\text{out}}=V_{DD}\\) |\n| \\(V_{\\text{in}}=V_{DD}\\) | OFF | ON | \\(V_{\\text{out}}=0\\) |\n| Intermediate | Both may be ON | Both may be ON | Transition region |\n\nThus\n\n\\[\n\\boxed{V_{\\text{out}}=\\overline{V_{\\text{in}}}}\n\\]\n\nwith rail-to-rail logic levels \\(V_{OH}\\approx V_{DD}\\) and \\(V_{OL}\\approx0\\).\n\nFor \\(V_{\\text{in}}\\) between \\(V_{Tn}\\) and \\(V_{DD}-V_{TP}\\), both transistors conduct and a supply-to-ground “short-circuit” or crowbar current exists. At either stable logic level, one transistor is off, so the ideal static supply current is zero; only leakage remains.\n\n---\n\n## 2. DC voltage-transfer characteristic\n\nLet\n\n\\[\nK_n=\\mu_nC_{ox}\\left(\\frac WL\\right)_n,\\qquad\nK_p=\\mu_pC_{ox}\\left(\\frac WL\\right)_p\n\\]\n\nand, neglecting channel-length modulation,\n\n\\[\nV_{OVn}=V_{\\text{in}}-V_{Tn},\\qquad\nV_{OVp}=V_{DD}-V_{\\text{in}}-V_{TP}.\n\\]\n\nThe device currents are\n\n\\[\nI_n=\n\\begin{cases}\nK_n\\left[V_{OVn}V_{\\text{out}}-\\dfrac{V_{\\text{out}}^2}{2}\\right],\n&V_{\\text{out}}<V_{OVn}\\quad\\text{(triode)}\\\\[6pt]\n\\dfrac{K_n}{2}V_{OVn}^2,\n&V_{\\text{out}}\\ge V_{OVn}\\quad\\text{(saturation)}\n\\end{cases}\n\\]\n\nand\n\n\\[\nI_p=\n\\begin{cases}\nK_p\\left[V_{OVp}(V_{DD}-V_{\\text{out}})\n-\\dfrac{(V_{DD}-V_{\\text{out}})^2}{2}\\right],\n&V_{DD}-V_{\\text{out}}<V_{OVp}\\quad\\text{(triode)}\\\\[6pt]\n\\dfrac{K_p}{2}V_{OVp}^2,\n&V_{DD}-V_{\\text{out}}\\ge V_{OVp}\\quad\\text{(saturation)}.\n\\end{cases}\n\\]\n\nAt dc equilibrium,\n\n\\[\n\\boxed{I_n=I_p}\n\\]\n\ndetermines \\(V_{\\text{out}}\\).\n\nTypical region sequence as \\(V_{\\text{in}}\\) rises:\n\n1. \\(V_{\\text{in}}\\le V_{Tn}\\): nMOS off, \\(V_{\\text{out}}=V_{DD}\\).\n2. Just above \\(V_{Tn}\\): nMOS saturated, pMOS triode; output begins to fall.\n3. Near the switching point: both saturated; the transition is very steep.\n4. Higher input: nMOS triode, pMOS saturated; output approaches zero.\n5. \\(V_{\\text{in}}\\ge V_{DD}-V_{TP}\\): pMOS off, \\(V_{\\text{out}}=0\\).\n\n### Switching threshold\n\nAt the switching threshold \\(V_{\\text{in}}=V_{\\text{out}}=V_M\\), both devices are saturated:\n\n\\[\n\\frac{K_n}{2}(V_M-V_{Tn})^2\n=\n\\frac{K_p}{2}(V_{DD}-V_M-V_{TP})^2 .\n\\]\n\nHence\n\n\\[\n\\boxed{\nV_M=\n\\frac{V_{DD}-V_{TP}\n+\\sqrt{K_n/K_p}\\,V_{Tn}}\n{1+\\sqrt{K_n/K_p}}\n}\n\\]\n\nFor \\(K_n=K_p\\) and \\(V_{Tn}=V_{TP}\\),\n\n\\[\n\\boxed{V_M=\\frac{V_{DD}}2}.\n\\]\n\nBecause \\(\\mu_n\\) is typically two to three times \\(\\mu_p\\), the pMOS is normally made proportionally wider to obtain a symmetric transfer curve and comparable rise/fall delays.\n\nWith channel-length modulation, the gain near \\(V_M\\) is approximately\n\n\\[\nA_v\\approx\n-\\frac{g_{mn}+g_{mp}}\n{g_{dsn}+g_{dsp}+G_L},\n\\]\n\nwhich is large because the output conductances are small. The points where \\(dV_{\\text{out}}/dV_{\\text{in}}=-1\\) define \\(V_{IL}\\) and \\(V_{IH}\\), giving\n\n\\[\nN_{ML}=V_{IL}-V_{OL},\\qquad\nN_{MH}=V_{OH}-V_{IH}.\n\\]\n\n---\n\n## 3. Dynamic and power behavior\n\n- Input gates draw essentially no dc current.\n- A capacitive output load \\(C_L\\) is charged through \\(M_1\\) and discharged through \\(M_2\\).\n- \\(t_{PLH}\\sim0.69R_{\\text{eq},p}C_L\\), \\(t_{PHL}\\sim0.69R_{\\text{eq},n}C_L\\).\n- Dynamic power is approximately\n  \\[\n  P_{\\text{dyn}}=\\alpha C_LV_{DD}^2f.\n  \\]\n- Short-circuit power occurs while the input is transitioning—or if it is held in the transition range.\n- Static power at valid logic levels is mainly leakage.\n\nThe pMOS n-well must be tied to \\(V_{DD}\\) and the nMOS body to ground. Connecting the pMOS body to \\(V_{\\text{out}}\\) could forward-bias a parasitic body diode and invalidate the ideal analysis.\n\n---\n\n## 4. If both drawn transistors are enhancement nMOS\n\nThe arrows in the figure can also be read as showing two identical nMOS devices, with \\(M_1\\)'s source at \\(V_{\\text{out}}\\). In that case:\n\n\\[\nV_{GS1}=V_{\\text{in}}-V_{\\text{out}},\\qquad\nV_{GS2}=V_{\\text{in}}.\n\\]\n\n- For \\(V_{\\text{in}}=0\\), both devices are off and \\(V_{\\text{out}}\\) is floating; there is no dc pull-up to \\(V_{DD}\\).\n- At high \\(V_{\\text{in}}\\), both devices conduct, creating a direct dc path from \\(V_{DD}\\) to ground.\n- \\(M_1\\) acts as a source-follower pull-up, so it cannot deliver an unattenuated \\(V_{DD}\\).\n\nFor equal thresholds, long-channel square-law devices, \\(M_1\\) saturated and \\(M_2\\) triode,\n\n\\[\nV_{\\text{out}}\\approx\n(V_{\\text{in}}-V_{Tn})\n\\left[\n1-\\sqrt{\\frac{K_2}{K_1+K_2}}\n\\right].\n\\]\n\nThe output is therefore ratio-dependent and not a valid rail-to-rail low unless \\(M_2\\) is much stronger than \\(M_1\\). This version is not a restoring CMOS inverter and burns static current when the input is high.\n\nHence the proper complementary \\(M_1=\\) pMOS, \\(M_2=\\) nMOS connection implements the inverter; two identical nMOS devices do not.",
        "format": "markdown",
        "sha256": "b8b87757fbcbe2e2e442de233033f7644c97683777db04d5117cc35aebfe1cfb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The figure must be identified as two NMOS devices, but the answer treats that as only an alternative and spends most of its analysis treating the circuit as a conventional CMOS inverter. The correct conditional discussion at the end does not resolve the essential topology identification.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 265,
        "output_tokens": 28966,
        "total_tokens": 29231,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27238,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 265,
        "output_tokens": 28966,
        "total_tokens": 29231,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27238,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is the pMOS pull-up (source/body at \\(V_{DD}\\)) and \\(M_2\\) is the nMOS pull-down (source/body at ground), the circuit is a **CMOS inverter**.\n\n## 1. DC logic operation\n\nFor an unloaded output:\n\n| \\(V_{in}\\) | \\(M_1\\) pMOS | \\(M_2\\) nMOS | \\(V_{out}\\) |\n|---|---|---|---|\n| \\(0\\) / logic 0 | ON | OFF | \\(V_{DD}\\) / logic 1 |\n| \\(V_{DD}\\) / logic 1 | OFF | ON | \\(0\\) / logic 0 |\n\nThus\n\n\\[\nV_{\\text{out}}=\\overline{V_{\\text{in}}}.\n\\]\n\nThe pMOS provides a full logic-1 level \\(V_{DD}\\), and the nMOS provides a full logic-0 level. At either stable logic state, one device is off, so the ideal static supply current is zero; only leakage current remains.\n\n## 2. Voltage-transfer characteristic\n\nLet\n\n\\[\n\\beta_n=\\mu_n C_{\\rm ox}\\left(\\frac WL\\right)_n,\\qquad\n\\beta_p=\\mu_p C_{\\rm ox}\\left(\\frac WL\\right)_p\n\\]\n\nand neglect channel-length modulation. With \\(V_i=V_{in}\\), \\(V_o=V_{out}\\), the drain currents are\n\n\\[\nI_n=\n\\begin{cases}\n0, & V_i<V_{Tn},\\\\[2mm]\n\\beta_n\\!\\left[(V_i-V_{Tn})V_o-\\dfrac{V_o^2}{2}\\right],\n& V_o<V_i-V_{Tn},\\\\[2mm]\n\\dfrac{\\beta_n}{2}(V_i-V_{Tn})^2,\n& V_o\\ge V_i-V_{Tn},\n\\end{cases}\n\\]\n\n\\[\nI_p=\n\\begin{cases}\n0, & V_i>V_{DD}-|V_{Tp}|,\\\\[2mm]\n\\beta_p\\!\\left[A(V_{DD}-V_o)-\\dfrac{(V_{DD}-V_o)^2}{2}\\right],\n& V_o>V_i+|V_{Tp}|,\\\\[2mm]\n\\dfrac{\\beta_p}{2}A^2,\n& V_o\\le V_i+|V_{Tp}|,\n\\end{cases}\n\\]\n\nwhere \\(A=V_{DD}-V_i-|V_{Tp}|\\). At DC,\n\n\\[\n\\boxed{I_n=I_p}.\n\\]\n\nThe VTC regions are:\n\n1. \\(V_i<V_{Tn}\\): nMOS off, \\(V_o=V_{DD}\\).\n2. nMOS saturated, pMOS triode: \\(V_o\\) begins to fall.\n3. Near the switching point, both devices are saturated and the VTC is very steep. With \\(\\lambda=0\\), it is a vertical transition.\n4. nMOS triode, pMOS saturated: \\(V_o\\) approaches zero.\n5. \\(V_i>V_{DD}-|V_{Tp}|\\): pMOS off, \\(V_o=0\\).\n\n## 3. Switching threshold\n\nAt the \\(V_i=V_o=V_M\\) switching point, both transistors are normally saturated. Equating their currents gives\n\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{Tn})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{Tp}|)^2 .\n\\]\n\nHence\n\n\\[\n\\boxed{\nV_M=\n\\frac{V_{DD}-|V_{Tp}|+\n\\sqrt{\\beta_n/\\beta_p}\\,V_{Tn}}\n{1+\\sqrt{\\beta_n/\\beta_p}}\n}\n\\]\n\nFor matched thresholds and \\(\\beta_n=\\beta_p\\),\n\n\\[\nV_M=\\frac{V_{DD}}{2}.\n\\]\n\nSince \\(\\mu_n\\) is typically \\(2\\!-\\!3\\) times \\(\\mu_p\\), a symmetrically sized inverter normally uses a pMOS about \\(2\\!-\\!3\\) times as wide as the nMOS. A stronger nMOS shifts \\(V_M\\) below \\(V_{DD}/2\\); a stronger pMOS shifts it above.\n\nFor a symmetric square-law inverter,\n\n\\[\nV_{IL}\\approx\\frac{3V_{DD}+2V_T}{8},\\qquad\nV_{IH}\\approx\\frac{5V_{DD}-2V_T}{8},\n\\]\n\nwith \\(V_{OH}\\approx V_{DD}\\), \\(V_{OL}\\approx0\\).\n\n## 4. Small-signal behavior\n\nNear the transition, with both devices saturated, the two transconductances add:\n\n\\[\n\\boxed{\nA_v(0)\\approx\n-(g_{mn}+g_{mp})(r_{on}\\parallel r_{op})\n=\n-\\frac{g_{mn}+g_{mp}}{g_{on}+g_{op}}\n}\n\\]\n\nfor an unloaded output. Thus a CMOS inverter can also act as a high-gain inverting amplifier when biased near \\(V_M\\). If \\(\\lambda=0\\), \\(r_o\\to\\infty\\) and the ideal long-channel model predicts infinite gain/vertical switching; channel-length modulation makes the gain finite. With a capacitive load,\n\n\\[\nA_v(s)\\approx\n-\\frac{g_{mn}+g_{mp}}\n{g_{on}+g_{op}+sC_L}.\n\\]\n\n## 5. Switching and power\n\n- Low-to-high \\(V_{in}\\): \\(M_2\\) discharges \\(C_L\\), so \\(V_{out}\\) falls.\n- High-to-low \\(V_{in}\\): \\(M_1\\) charges \\(C_L\\), so \\(V_{out}\\) rises.\n- Delay is approximately \\(0.69R_{\\rm eq}C_L\\), or \\(t_d\\sim C_LV_{DD}/I_{\\rm drive}\\).\n- Both devices conduct briefly during an input transition, causing short-circuit current.\n- Capacitive switching power is approximately\n  \\[\n  P_{\\rm dyn}\\approx \\alpha C_LV_{DD}^2f,\n  \\]\n  plus short-circuit and leakage power.\n\nIf \\(V_{DD}<V_{Tn}+|V_{Tp}|\\), there is an input interval where both devices are off and the output may float.\n\nIf the arrows in the drawing are instead intended to indicate that **both** devices are enhancement nMOS transistors, the circuit is not a CMOS inverter: at low \\(V_{in}\\) both would be off and \\(V_{out}\\) would float, while at high \\(V_{in}\\) both would conduct and create a ratioed, static-current-consuming network. A pull-up load or a pMOS device would be required.",
        "format": "markdown",
        "sha256": "63022716ab9b6b0a577a7b624b4f1c858530fa6e50ef28a6695de7f3d6c257fd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit has two NMOS devices, but the answer treats M1 as a pMOS and analyzes an ordinary CMOS inverter. The hypothetical caveat does not correct this misidentification.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 192,
        "input_tokens": 265,
        "output_tokens": 22165,
        "total_tokens": 22430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20824,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 192,
        "input_tokens": 265,
        "output_tokens": 22165,
        "total_tokens": 22430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20824,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The key issue is the transistor symbols. A CMOS inverter requires **M1 to be pMOS and M2 nMOS**. Normally this is shown by a gate bubble on M1 or by opposite source/body arrows. In the supplied figure, both arrows appear to point outward, which would make **both devices NMOS**. The two interpretations give completely different circuits.\n\nAssume an unloaded output and the square-law model with \\(\\lambda=0\\), unless stated otherwise.\n\n---\n\n## 1. If both devices are NMOS — literal reading of the arrows\n\nLet \\(y=V_{\\text{out}}\\) and \\(\\beta_i=\\mu_nC_{\\rm ox}(W/L)_i\\).\n\n- For M1, the higher-potential terminal \\(V_{DD}\\) is its drain and the lower-potential terminal \\(y\\) is its source:\n  \\[\n  V_{GS1}=V_{\\text{in}}-y.\n  \\]\n- For M2:\n  \\[\n  V_{GS2}=V_{\\text{in}},\\qquad V_{DS2}=y.\n  \\]\n\n### Low input\n\nFor \\(V_{\\text{in}}\\le V_{TN}\\), M2 is off. Since \\(y\\ge0\\),\n\n\\[\nV_{GS1}=V_{\\text{in}}-y\\le V_{TN},\n\\]\n\nso M1 is also off. Thus \\(V_{\\text{out}}\\) is a **floating node**; its voltage depends on initial charge and leakage. There is no restoring path to \\(V_{DD}\\), so the circuit does not produce a valid logic high.\n\n### Input above threshold\n\nFor \\(V_{\\text{in}}>V_{TN}\\), M2 turns on and discharges the output until M1 also turns on. M1 is normally saturated because\n\n\\[\nV_{DS1}=V_{DD}-y,\\qquad\nV_{GS1}-V_{TN}=V_{\\text{in}}-y-V_{TN},\n\\]\n\nand \\(V_{DS1}\\ge V_{GS1}-V_{TN}\\) for \\(V_{\\text{in}}\\le V_{DD}\\). M2 is in triode.\n\nFor identical transistors and negligible body effect,\n\n\\[\nI_{D1}=\\frac{\\beta}{2}(V_{\\text{in}}-y-V_{TN})^2,\n\\]\n\n\\[\nI_{D2}=\\beta\\left[(V_{\\text{in}}-V_{TN})y-\\frac{y^2}{2}\\right].\n\\]\n\nSetting \\(I_{D1}=I_{D2}\\), with \\(A=V_{\\text{in}}-V_{TN}\\),\n\n\\[\n\\frac12(A-y)^2=Ay-\\frac{y^2}{2},\n\\]\n\ngiving the physical solution\n\n\\[\n\\boxed{V_{\\text{out}}=\\left(1-\\frac{1}{\\sqrt2}\\right)(V_{\\text{in}}-V_{TN})\n\\approx0.293(V_{\\text{in}}-V_{TN})}.\n\\]\n\nThus:\n\n- The output increases with \\(V_{\\text{in}}\\); this is **not an inverter**.\n- Small-signal gain is only about \\(0.293\\).\n- At \\(V_{\\text{in}}=V_{DD}\\),\n  \\[\n  V_{\\text{out}}\\approx0.293(V_{DD}-V_{TN}),\n  \\]\n  not zero.\n- A direct DC path exists from \\(V_{DD}\\) through M1 and M2 to ground. For identical devices,\n  \\[\n  I_{DD}=\\frac{\\beta}{4}(V_{\\text{in}}-V_{TN})^2,\n  \\qquad\n  P_{DC}\\approx V_{DD}I_{DD}.\n  \\]\n\nFor unequal devices, with \\(r=\\beta_2/\\beta_1\\), \\(a=V_{\\text{in}}-V_{T1}\\), and \\(b=V_{\\text{in}}-V_{T2}\\),\n\n\\[\n(1+r)y^2-2(a+rb)y+a^2=0,\n\\]\n\nwith the smaller root being physical. If M1’s body is tied to the common substrate at ground, its body effect must also be included:\n\n\\[\nV_{T1}(y)=V_{T0}+\\gamma\n\\left(\\sqrt{2\\phi_F+y}-\\sqrt{2\\phi_F}\\right),\n\\]\n\nwhich reduces the pull-up strength and generally lowers \\(V_{\\text{out}}\\).\n\nHence an all-NMOS version is a ratioed, dissipative source-follower/voltage-divider circuit, not a useful complementary logic inverter.\n\n---\n\n## 2. If M1 is intended to be pMOS — standard CMOS inverter\n\nThis is the usual textbook interpretation if the two source arrows are actually opposite or a gate bubble on M1 was omitted.\n\n| \\(V_{\\text{in}}\\) | M1 (pMOS) | M2 (nMOS) | \\(V_{\\text{out}}\\) |\n|---|---|---|---|\n| 0 | ON | OFF | \\(V_{DD}\\) |\n| \\(V_{DD}\\) | OFF | ON | 0 |\n\nThus \\(V_{OH}=V_{DD}\\), \\(V_{OL}=0\\), and the circuit has full rail-to-rail output swing.\n\nDuring the transition both devices can conduct. The switching threshold \\(V_M\\), where both are saturated, follows from\n\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{TP}|)^2,\n\\]\n\nso\n\n\\[\n\\boxed{\nV_M=\n\\frac{\\sqrt{\\beta_n}\\,V_{TN}\n+\\sqrt{\\beta_p}\\,(V_{DD}-|V_{TP}|)}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n}.\n\\]\n\nFor \\(\\beta_n=\\beta_p\\) and \\(V_{TN}=|V_{TP}|\\),\n\n\\[\n\\boxed{V_M=V_{DD}/2}.\n\\]\n\nThe transfer characteristic consists of:\n\n1. nMOS off, pMOS linear: \\(V_{\\text{out}}=V_{DD}\\);\n2. nMOS saturated, pMOS linear;\n3. high-gain transition, both saturated;\n4. nMOS linear, pMOS saturated;\n5. pMOS off, nMOS linear: \\(V_{\\text{out}}=0\\).\n\nWith channel-length modulation, the transition has large but finite gain,\n\n\\[\nA_v\\approx-(g_{mn}+g_{mp})(r_{on}\\parallel r_{op}).\n\\]\n\nIdeally, static current is zero in either logic state. Power is mainly capacitive switching loss,\n\n\\[\nP_{\\rm dyn}\\approx \\alpha C_LV_{DD}^2f,\n\\]\n\nplus short-circuit current during transitions and leakage.\n\n---\n\n### Bottom line\n\n- **M1 pMOS, M2 nMOS:** ordinary CMOS inverter, rail-to-rail output and negligible static power.\n- **Both devices NMOS, as the two same-direction arrows appear to indicate:** not an inverter; the output floats for low input and, for higher input, follows approximately \\(0.293(V_{\\text{in}}-V_{TN})\\) while burning substantial DC power.",
        "format": "markdown",
        "sha256": "ee1e5ae1cee23cce75015f675057f4fd5889cd18a5456aeb185f00860409ef99"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies both devices as NMOS for the figure’s literal reading, describes the upper source-follower and lower pull-down actions, and concludes the circuit is not a normal CMOS inverter. The conditional discussion of a hypothetical pMOS interpretation does not change that central answer.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 192,
        "input_tokens": 265,
        "output_tokens": 27410,
        "total_tokens": 27675,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25969,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 192,
        "input_tokens": 265,
        "output_tokens": 27410,
        "total_tokens": 27675,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25969,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS common-source stage with a diode-connected PMOS load**. It is inverting, but it is not a conventional complementary CMOS inverter because the gate of \\(M_2\\) is tied to the output rather than to \\(V_{\\text{in}}\\).\n\nAssume long-channel square-law operation, negligible channel-length modulation/body effect, and no dc load at the output. Define\n\n\\[\nk_n=\\mu_nC_{\\rm ox}\\left(\\frac WL\\right)_1,\\qquad\nk_p=\\mu_pC_{\\rm ox}\\left(\\frac WL\\right)_2,\n\\]\n\n\\[\nV_{Tn}>0,\\qquad V_{Tp}=|V_{TP}|,\\qquad\nA=V_{DD}-V_{Tp},\\qquad\nm=\\sqrt{\\frac{k_n}{k_p}} .\n\\]\n\n## 1. Operating regions\n\nFor \\(M_2\\),\n\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{\\text{out}} .\n\\]\n\nThus its overdrive is\n\n\\[\nV_{OV2}=A-V_{\\text{out}}.\n\\]\n\nIt is on for \\(V_{\\text{out}}<A\\). Since its gate and drain are shorted, it is always in saturation whenever it is on:\n\n\\[\nI_{D2}=\\frac{k_p}{2}(A-V_{\\text{out}})^2.\n\\]\n\nFor \\(M_1\\),\n\n- \\(V_{\\text{in}}\\le V_{Tn}\\): off;\n- \\(V_{\\text{out}}\\ge V_{\\text{in}}-V_{Tn}\\): saturation;\n- \\(V_{\\text{out}}<V_{\\text{in}}-V_{Tn}\\): triode.\n\nThe dc condition is \\(I_{D1}=I_{D2}\\).\n\n---\n\n## 2. Voltage-transfer characteristic\n\n### \\(V_{\\text{in}}\\le V_{Tn}\\)\n\n\\(M_1\\) is off and there is no steady current. If the output is initially low, \\(M_2\\) charges it only to approximately\n\n\\[\nV_{OH}\\simeq V_{DD}-V_{Tp}=A,\n\\]\n\nwhere its overdrive becomes zero. In the ideal square-law model, any voltage in\n\n\\[\nA\\le V_{\\text{out}}\\le V_{DD}\n\\]\n\nis a no-current equilibrium: the node is floating. A precharged output can therefore remain near \\(V_{DD}\\). Real subthreshold/leakage currents can slowly bring it closer to \\(V_{DD}\\). Consequently, the high level is not actively and uniquely driven as in a standard CMOS inverter.\n\n### Both transistors saturated\n\nFor \\(V_{\\text{in}}>V_{Tn}\\),\n\n\\[\n\\frac{k_n}{2}(V_{\\text{in}}-V_{Tn})^2\n=\n\\frac{k_p}{2}(A-V_{\\text{out}})^2 .\n\\]\n\nHence\n\n\\[\n\\boxed{V_{\\text{out}}\n=\nV_{DD}-V_{Tp}\n-\n\\sqrt{\\frac{k_n}{k_p}}\\,(V_{\\text{in}}-V_{Tn})}\n\\]\n\nor \\(V_{\\text{out}}=A-m(V_{\\text{in}}-V_{Tn})\\).\n\nThus this portion of the transfer characteristic is a straight line with slope\n\n\\[\n\\boxed{\\frac{dV_{\\text{out}}}{dV_{\\text{in}}}\n=-\\sqrt{\\frac{k_n}{k_p}}=-m}.\n\\]\n\nThis region ends when \\(M_1\\) enters triode, i.e. when \\(V_{\\text{out}}=V_{\\text{in}}-V_{Tn}\\):\n\n\\[\nV_{\\text{in},B}=V_{Tn}+\\frac{A}{1+m},\\qquad\nV_{\\text{out},B}=\\frac{A}{1+m}.\n\\]\n\n### \\(M_1\\) in triode, \\(M_2\\) saturated\n\nLet \\(x=V_{\\text{in}}-V_{Tn}\\). The dc equation becomes\n\n\\[\nk_n\\left(xV_{\\text{out}}-\\frac{V_{\\text{out}}^2}{2}\\right)\n=\n\\frac{k_p}{2}(A-V_{\\text{out}})^2,\n\\]\n\nor, using \\(m^2=k_n/k_p\\),\n\n\\[\nm^2(2xV_{\\text{out}}-V_{\\text{out}}^2)\n=(A-V_{\\text{out}})^2.\n\\]\n\nThe physical, smaller root is\n\n\\[\n\\boxed{\nV_{\\text{out}}=\n\\frac{A+m^2x-\n\\sqrt{(A+m^2x)^2-(1+m^2)A^2}}\n{1+m^2}\n}.\n\\]\n\nFor large \\(V_{\\text{in}}\\) and a much stronger \\(M_1\\),\n\n\\[\nV_{\\text{out}}\\approx\n\\frac{A^2}{2m^2x}.\n\\]\n\nTherefore \\(V_{OL}>0\\); the low output is set by the \\(k_n/k_p\\) ratio.\n\nThe logic switching point \\(V_{\\text{in}}=V_{\\text{out}}=V_M\\), assuming \\(M_1\\) is saturated there, is\n\n\\[\n\\boxed{\nV_M=\\frac{V_{DD}-V_{Tp}+m V_{Tn}}{1+m}\n}.\n\\]\n\n---\n\n## 3. Small-signal voltage gain\n\nWhen both devices are saturated, the diode-connected \\(M_2\\) presents approximately \\(1/g_{m2}\\) at the output. Including output conductances,\n\n\\[\nR_{\\text{out}}\n=\n\\frac{1}{g_{o1}+g_{o2}+g_{m2}}\n\\simeq r_{o1}\\parallel r_{o2}\\parallel \\frac{1}{g_{m2}},\n\\]\n\nand\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n-\\frac{g_{m1}}{g_{o1}+g_{o2}+g_{m2}}\n\\approx-\\frac{g_{m1}}{g_{m2}}\n}.\n\\]\n\nSince both transistors carry the same current,\n\n\\[\n\\frac{g_{m1}}{g_{m2}}\n=\n\\sqrt{\\frac{k_n}{k_p}},\n\\]\n\nso\n\n\\[\n\\boxed{\nA_v\\approx\n-\\sqrt{\\frac{\\mu_n(W/L)_1}{\\mu_p(W/L)_2}}\n=-m\n}.\n\\]\n\nThe gain is therefore inverting, set by device sizing, and generally modest; it can exceed unity only if \\(M_1\\) is substantially stronger than \\(M_2\\). Once \\(M_1\\) enters triode, the gain decreases toward zero.\n\n## Overall\n\n- It is a **ratioed inverting common-source stage**, not a true complementary CMOS inverter.\n- \\(M_2\\) is a diode-connected, always-saturated-when-on load.\n- The high output is weakly defined/floating near \\(V_{DD}-|V_{TP}|\\) to \\(V_{DD}\\).\n- The low output is nonzero and depends on \\(k_n/k_p\\).\n- For high \\(V_{\\text{in}}\\), a direct dc path from \\(V_{DD}\\) to ground causes static power dissipation.\n- In the useful amplification region, \\(A_v\\simeq-\\sqrt{k_n/k_p}\\).",
        "format": "markdown",
        "sha256": "7b317daf4e4399a062d3d8c947fc106da0268b5b21e2f54c4c56a5bb2ee4ab2d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS common-source stage with a diode-connected PMOS load and gives the inverting gain, including both output conductances consistently; the additional operating-point analysis is also sound.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 611,
        "output_tokens": 26968,
        "total_tokens": 27579,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25514,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 611,
        "output_tokens": 26968,
        "total_tokens": 27579,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25514,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume long-channel square-law MOSFETs, \\(M_1\\) is NMOS with its body at ground, \\(M_2\\) is PMOS with source/body at \\(V_{DD}\\), and there is no dc load.\n\nDefine\n\n\\[\n\\beta_n=\\mu_nC_{\\rm ox}\\left(\\frac WL\\right)_1,\\qquad\n\\beta_p=\\mu_pC_{\\rm ox}\\left(\\frac WL\\right)_2,\n\\]\n\n\\[\nV_P=|V_{TP}|,\\qquad A=V_{DD}-V_P,\\qquad\nr=\\sqrt{\\frac{\\beta_n}{\\beta_p}},\n\\]\n\nand use \\(I_D=\\tfrac12\\beta V_{OV}^2\\) in saturation.\n\n## 1. Circuit identification\n\n- \\(M_1\\) is a common-source NMOS.\n- \\(M_2\\) has gate and drain tied together, so it is a **diode-connected PMOS load**.\n- This is not a conventional CMOS inverter because the PMOS gate is tied to \\(V_{\\text{out}}\\), not \\(V_{\\text{in}}\\).\n\nFor \\(M_2\\),\n\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{\\text{out}}.\n\\]\n\nTherefore, whenever it is on,\n\n\\[\nV_{SD2}=V_{SG2}\\ge V_{SG2}-V_P,\n\\]\n\nso \\(M_2\\) is always in saturation. Its current is\n\n\\[\nI_2=\\frac{\\beta_p}{2}\\left(V_{DD}-V_{\\text{out}}-V_P\\right)^2\n=\\frac{\\beta_p}{2}(A-V_{\\text{out}})^2 .\n\\]\n\n## 2. DC transfer characteristic\n\n### \\(M_1\\) off: \\(V_{\\text{in}}\\le V_{Tn}\\)\n\nThere is no pull-down current. Starting from a lower output voltage, \\(M_2\\) charges the output until its overdrive becomes zero:\n\n\\[\nV_{\\text{out}}\\simeq V_{DD}-V_P=A.\n\\]\n\nStrictly, in the ideal cutoff model both devices are off for any \\(A\\le V_{\\text{out}}\\le V_{DD}\\), so the output is floating. Leakage/subthreshold conduction can make it slowly drift toward \\(V_{DD}\\). Thus this circuit does not provide a hard \\(V_{DD}\\) high level.\n\n### Both devices conducting, \\(M_1\\) saturated\n\nFor \\(M_1\\),\n\n\\[\nI_1=\\frac{\\beta_n}{2}(V_{\\text{in}}-V_{Tn})^2\n\\]\n\nas long as\n\n\\[\nV_{\\text{out}}\\ge V_{\\text{in}}-V_{Tn}.\n\\]\n\nEquating \\(I_1=I_2\\),\n\n\\[\nV_{DD}-V_{\\text{out}}-V_P\n=r(V_{\\text{in}}-V_{Tn}),\n\\]\n\nhence\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=V_{DD}-V_P-r\\left(V_{\\text{in}}-V_{Tn}\\right)\n}\n\\]\n\nThis is a linearly inverting region with large-signal slope\n\n\\[\n\\frac{dV_{\\text{out}}}{dV_{\\text{in}}}=-r.\n\\]\n\n\\(M_1\\) remains saturated until\n\n\\[\nV_{\\text{in}}\\le V_{Tn}+\\frac{A}{1+r},\n\\]\n\nat which point\n\n\\[\nV_{\\text{out}}=V_{\\text{in}}-V_{Tn}=\\frac{A}{1+r}.\n\\]\n\nIf used as a logic inverter, the \\(V_{\\text{in}}=V_{\\text{out}}\\) switching point in this region is\n\n\\[\nV_M=\\frac{A+rV_{Tn}}{1+r}.\n\\]\n\n### \\(M_1\\) in triode for larger \\(V_{\\text{in}}\\)\n\nLet \\(v_n=V_{\\text{in}}-V_{Tn}\\). KCL gives\n\n\\[\n\\beta_n\\left(v_nV_{\\text{out}}-\\frac{V_{\\text{out}}^2}{2}\\right)\n=\\frac{\\beta_p}{2}(A-V_{\\text{out}})^2,\n\\]\n\nor\n\n\\[\n(1+r^2)V_{\\text{out}}^2\n-2(A+r^2v_n)V_{\\text{out}}+A^2=0.\n\\]\n\nThe physical smaller root is\n\n\\[\nV_{\\text{out}}\n=\n\\frac{\nA+r^2v_n-r\\sqrt{2Av_n+r^2v_n^2-A^2}\n}{1+r^2}.\n\\]\n\nFor very large \\(V_{\\text{in}}\\),\n\n\\[\nV_{\\text{out}}\\approx \\frac{A^2}{2r^2v_n}\\rightarrow 0.\n\\]\n\nThus the VTC starts near \\(V_{DD}-V_P\\), falls approximately linearly, then bends and approaches zero.\n\n## 3. Small-signal gain\n\nAt a bias point where \\(M_1\\) is saturated and both devices carry current \\(I_Q\\),\n\n\\[\ng_{m1}=\\beta_n(V_{\\text{in}}-V_{Tn}),\\qquad\ng_{m2}=\\beta_p(A-V_{\\text{out}}).\n\\]\n\nThe diode-connected PMOS presents a small-signal resistance approximately \\(1/g_{m2}\\). Including channel-length modulation and an external load \\(R_L\\),\n\n\\[\nR_o=\n\\frac{1}{\ng_{m2}+g_{o1}+g_{o2}+1/R_L\n},\n\\]\n\nand therefore\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-\\frac{g_{m1}}\n{g_{m2}+g_{o1}+g_{o2}+1/R_L}\n}\n\\]\n\nIf channel-length modulation and external loading are neglected,\n\n\\[\n\\boxed{\nA_v\\simeq-\\frac{g_{m1}}{g_{m2}}\n=-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n=-\\sqrt{\n\\frac{\\mu_n(W/L)_1}{\\mu_p(W/L)_2}\n}\n}\n\\]\n\nwhich agrees with the slope \\(-r\\) of the dc transfer curve. If the PMOS source/body voltage could vary, a \\(g_{mb2}\\) term would also add to the denominator; with source and body tied to \\(V_{DD}\\), it does not.\n\nWhen \\(M_1\\) enters triode, the gain becomes nonlinear and its magnitude falls. Ignoring \\(g_o\\),\n\n\\[\nA_v=\n-\\frac{\\beta_nV_{\\text{out}}}\n{\\beta_n(v_n-V_{\\text{out}})+\\beta_p(A-V_{\\text{out}})}.\n\\]\n\n## 4. Main properties\n\n- Inverting common-source/ratioed inverter.\n- \\(M_2\\) is saturated whenever it conducts.\n- Gain is set mainly by the \\(\\beta_n/\\beta_p\\) ratio and is typically modest.\n- The high output is approximately \\(V_{DD}-|V_{TP}|\\), not a firmly driven \\(V_{DD}\\).\n- There is continuous static current \\(V_{DD}I_Q\\) whenever \\(M_1\\) is on, unlike a complementary CMOS inverter.\n- The useful linear output range for \\(M_1\\) saturated is approximately\n  \\[\n  \\frac{A}{1+r}\\le V_{\\text{out}}\\le A.\n  \\]",
        "format": "markdown",
        "sha256": "5ffde0c0099e5b64fad5dfb438235e1272884bda68a4988b50828133271d02e4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain −gm1/gm2, along with a consistent channel-length-modulation form. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 512,
        "input_tokens": 611,
        "output_tokens": 29390,
        "total_tokens": 30001,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27913,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 512,
        "input_tokens": 611,
        "output_tokens": 29390,
        "total_tokens": 30001,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27913,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-source NMOS stage with a diode-connected PMOS load**. It is also a ratioed inverter—not a conventional CMOS inverter—because the PMOS gate is tied to the output rather than to \\(V_{\\text{in}}\\).\n\nAssume long-channel square-law operation, \\(\\lambda=0\\) initially, no body effect, no external load, and define\n\n\\[\n\\beta_n=\\mu_n C_{\\rm ox}\\left(\\frac WL\\right)_1,\\qquad\n\\beta_p=\\mu_p C_{\\rm ox}\\left(\\frac WL\\right)_2,\n\\]\n\n\\[\nV_{TN}=V_{Tn},\\qquad V_{TP}=|V_{Tp}|,\\qquad\nV_A=V_{DD}-V_{TP},\n\\]\n\n\\[\nq=\\sqrt{\\frac{\\beta_n}{\\beta_p}},\\qquad r=\\frac{\\beta_p}{\\beta_n}=\\frac1{q^2}.\n\\]\n\n## 1. DC operation\n\nFor \\(M_2\\),\n\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{\\text{out}},\n\\]\n\nso whenever it conducts it is automatically in saturation. Its overdrive is\n\n\\[\nV_{OVp}=V_{DD}-V_{\\text{out}}-V_{TP}=V_A-V_{\\text{out}},\n\\]\n\nand\n\n\\[\nI_2=\\frac{\\beta_p}{2}(V_A-V_{\\text{out}})^2,\n\\qquad V_{\\text{out}}<V_A.\n\\]\n\nFor \\(V_{\\text{out}}\\ge V_A\\), \\(M_2\\) is off.\n\nFor \\(M_1\\), with \\(x=V_{\\text{in}}-V_{TN}\\),\n\n\\[\nI_1=\n\\begin{cases}\n0, & V_{\\text{in}}\\le V_{TN},\\\\[4pt]\n\\dfrac{\\beta_n}{2}x^2,\n& x>0,\\;V_{\\text{out}}\\ge x \\quad \\text{(saturation)},\\\\[8pt]\n\\beta_n\\left(xV_{\\text{out}}-\\dfrac{V_{\\text{out}}^2}{2}\\right),\n& V_{\\text{out}}<x \\quad \\text{(triode)}.\n\\end{cases}\n\\]\n\nAt DC, \\(I_1=I_2\\).\n\n### Region I: \\(V_{\\text{in}}\\le V_{TN}\\)\n\n\\(M_1\\) is off. Starting from a low output, \\(M_2\\) charges the output until its overdrive becomes zero:\n\n\\[\n\\boxed{V_{\\text{out}}\\approx V_{OH}=V_{DD}-V_{TP}=V_A.}\n\\]\n\nStrictly, in an ideal leakage-free model any \\(V_{\\text{out}}\\ge V_A\\) is a zero-current state, since \\(M_2\\) is off and the node is floating; \\(V_A\\) is the usual value reached from below.\n\n### Region II: both transistors saturated\n\nEquating saturation currents,\n\n\\[\n\\frac{\\beta_n}{2}(V_{\\text{in}}-V_{TN})^2\n=\n\\frac{\\beta_p}{2}(V_A-V_{\\text{out}})^2,\n\\]\n\ngives\n\n\\[\n\\boxed{V_{\\text{out}}\n=\nV_A-q(V_{\\text{in}}-V_{TN}).}\n\\]\n\nThus the transfer characteristic is linear in this region, with slope\n\n\\[\n\\boxed{\\frac{dV_{\\text{out}}}{dV_{\\text{in}}}=-q.}\n\\]\n\nThis region ends when \\(M_1\\) enters triode, i.e. \\(V_{\\text{out}}=V_{\\text{in}}-V_{TN}\\):\n\n\\[\n\\boxed{\nV_X=V_{TN}+\\frac{V_A}{1+q},\n\\qquad\nV_{\\text{out}}(V_X)=\\frac{V_A}{1+q}.\n}\n\\]\n\nHence the useful amplifier bias range is approximately\n\n\\[\nV_{TN}<V_{\\text{in}}<V_X.\n\\]\n\n### Region III: \\(M_1\\) in triode, \\(M_2\\) saturated\n\nCurrent equality becomes\n\n\\[\n2xV_{\\text{out}}-V_{\\text{out}}^2\n=r(V_A-V_{\\text{out}})^2.\n\\]\n\nThe physical root is\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\n\\frac{x+rV_A-\n\\sqrt{(x+rV_A)^2-(1+r)rV_A^2}}\n{1+r},\n\\qquad x=V_{\\text{in}}-V_{TN}.\n}\n\\]\n\nThe gain in this region is no longer constant:\n\n\\[\n\\frac{dV_{\\text{out}}}{dV_{\\text{in}}}\n=\n-\\frac{V_{\\text{out}}}\n{x-V_{\\text{out}}+r(V_A-V_{\\text{out}})},\n\\]\n\nand tends toward zero for large \\(V_{\\text{in}}\\). In deep triode,\n\n\\[\nV_{\\text{out}}\\approx\n\\frac{\\beta_p}{\\beta_n}\n\\frac{V_A^2}{2(V_{\\text{in}}-V_{TN})}.\n\\]\n\nAt high input, \\(V_{\\text{out}}\\to0\\), but a finite DC current remains:\n\n\\[\nI_{\\text{high}}\\approx \\frac{\\beta_p}{2}V_A^2,\n\\qquad\nP_{\\text{static}}\\approx V_{DD}I_{\\text{high}}.\n\\]\n\n## 2. Switching threshold\n\nAt \\(V_{\\text{in}}=V_{\\text{out}}=V_M\\), \\(M_1\\) is still saturated. Using the Region-II equation,\n\n\\[\n\\boxed{\nV_M=\\frac{V_A+qV_{TN}}{1+q}\n=\n\\frac{V_{DD}-V_{TP}+qV_{TN}}{1+q}.\n}\n\\]\n\nA stronger NMOS, i.e. larger \\(q\\), moves \\(V_M\\) toward \\(V_{TN}\\); a stronger PMOS load moves it toward \\(V_{DD}-V_{TP}\\).\n\n## 3. Small-signal gain\n\nAt a bias point where both devices are saturated,\n\n\\[\ng_{m1}=\\sqrt{2\\beta_n I_D},\\qquad\ng_{m2}=\\sqrt{2\\beta_p I_D}.\n\\]\n\nBecause \\(M_2\\) is diode-connected, it presents a small-signal conductance approximately \\(g_{m2}\\) from the output to AC ground. Including channel-length modulation,\n\n\\[\ng_{o1},g_{o2}\\approx \\lambda_{n,p}I_D,\n\\]\n\nthe output-node KCL gives\n\n\\[\ng_{m1}v_{\\text{in}}\n+\n\\left(g_{m2}+g_{o1}+g_{o2}\\right)v_{\\text{out}}=0.\n\\]\n\nTherefore\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n-\\frac{g_{m1}}\n{g_{m2}+g_{o1}+g_{o2}}.\n}\n\\]\n\nNeglecting \\(g_o\\),\n\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_{m1}}{g_{m2}}\n=-q\n=\n-\\sqrt{\n\\frac{\\mu_n(W/L)_1}\n{\\mu_p(W/L)_2}\n}.\n}\n\\]\n\nThis is exactly the slope of the DC transfer curve in Region II. The gain is set by the transistor strength ratio and, to first order, is independent of bias current.\n\nThe intrinsic low-frequency output resistance is\n\n\\[\n\\boxed{\nr_{\\text{out}}\\approx\n\\frac{1}{g_{m2}+g_{o1}+g_{o2}}\n\\approx \\frac{1}{g_{m2}}.\n}\n\\]\n\nWith a capacitance \\(C_o\\) at the output, the dominant pole is approximately\n\n\\[\n\\omega_p\\approx\n\\frac{g_{m2}+g_{o1}+g_{o2}}{C_o}.\n\\]\n\n## 4. Main practical limitations\n\n- It is an **inverting, low-gain amplifier**, typically \\(|A_v|\\sim 2\\!-\\!10\\).\n- The high output is degraded by one PMOS threshold:\n  \\[\n  V_{OH}\\approx V_{DD}-|V_{Tp}|.\n  \\]\n- Unlike complementary CMOS logic, it draws static current whenever \\(M_1\\) conducts.\n- Increasing gain requires a much stronger \\(M_1\\) or weaker \\(M_2\\), which increases the required PMOS overdrive and reduces usable output swing.\n- For small-signal amplification, the bias point must satisfy\n  \\[\n  V_{\\text{in}}-V_{TN}<V_{\\text{out}}<V_{DD}-V_{TP},\n  \\]\n  so that \\(M_1\\) remains saturated and \\(M_2\\) remains conducting.",
        "format": "markdown",
        "sha256": "f2d06d06cc30bbb0eec5027ecb0721a0c52a0238c59e12a582675090d31cd92b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS with diode-connected PMOS load and gives the inverting gain, including channel-length modulation consistently as \u0000-g_{m1}/(g_{m2}+g_{o1}+g_{o2})\u0000. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 512,
        "input_tokens": 611,
        "output_tokens": 27064,
        "total_tokens": 27675,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25312,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 512,
        "input_tokens": 611,
        "output_tokens": 27064,
        "total_tokens": 27675,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25312,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nThe arrows identify both devices as **PMOS transistors**.\n\n- \\(M_2\\): source at \\(V_{DD}\\), drain at \\(V_{\\text{out}}\\), gate at \\(V_{\\text{in}}\\).\n- \\(M_1\\): source at \\(V_{\\text{out}}\\), gate and drain at ground. Thus \\(M_1\\) is a **diode-connected PMOS load**.\n\nThe dc current path is\n\n\\[\nV_{DD}\\rightarrow M_2\\rightarrow V_{\\text{out}}\\rightarrow M_1\\rightarrow 0.\n\\]\n\nIncreasing \\(V_{\\text{in}}\\) reduces \\(V_{SG2}=V_{DD}-V_{\\text{in}}\\), reducing the pull-up current, so \\(V_{\\text{out}}\\) falls. The circuit is therefore an **inverting, ratioed amplifier/inverter**, not a CMOS inverter.\n\n---\n\n## 2. DC transfer characteristic\n\nAssume initially:\n\n- long-channel square-law operation,\n- negligible channel-length modulation,\n- no body effect,\n- common threshold magnitude \\(V_P=|V_{Tp}|\\),\n- \\(k_i=\\mu_pC_{\\text{ox}}(W/L)_i\\),\n- no external output load.\n\n### Lower transistor \\(M_1\\)\n\n\\[\nV_{SG1}=V_{SD1}=V_{\\text{out}}.\n\\]\n\nHence, whenever it is on, \\(M_1\\) is saturated automatically:\n\n\\[\nV_{SD1}=V_{\\text{out}}\\ge V_{SG1}-V_P=V_{\\text{out}}-V_P.\n\\]\n\nThus\n\n\\[\nI_1=\\frac{k_1}{2}\\left(V_{\\text{out}}-V_P\\right)^2,\n\\qquad V_{\\text{out}}>V_P.\n\\]\n\n### Upper transistor \\(M_2\\)\n\n\\[\nV_{SG2}=V_{DD}-V_{\\text{in}},\\qquad\nV_{SD2}=V_{DD}-V_{\\text{out}}.\n\\]\n\nIt is on for \\(V_{\\text{in}}<V_{DD}-V_P\\).\n\nIn saturation, requiring \\(V_{\\text{out}}\\le V_{\\text{in}}+V_P\\),\n\n\\[\nI_2=\\frac{k_2}{2}\n\\left(V_{DD}-V_{\\text{in}}-V_P\\right)^2.\n\\]\n\nIn triode,\n\n\\[\nI_2=k_2\\left[\n\\left(V_{DD}-V_{\\text{in}}-V_P\\right)(V_{DD}-V_{\\text{out}})\n-\\frac{(V_{DD}-V_{\\text{out}})^2}{2}\n\\right].\n\\]\n\nThe dc output follows from \\(I_1=I_2\\).\n\n### Both devices saturated\n\nEquating the saturation currents gives\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_P+\n\\sqrt{\\frac{k_2}{k_1}}\n\\left(V_{DD}-V_{\\text{in}}-V_P\\right)\n}\n\\]\n\nvalid for\n\n\\[\n\\frac{\\sqrt{k_2/k_1}}{1+\\sqrt{k_2/k_1}}\n\\left(V_{DD}-V_P\\right)\n\\le V_{\\text{in}}\n\\le V_{DD}-V_P .\n\\]\n\nFor identical devices, \\(k_1=k_2\\), this reduces to the particularly simple result\n\n\\[\n\\boxed{V_{\\text{out}}=V_{DD}-V_{\\text{in}}}\n\\]\n\nover\n\n\\[\n\\frac{V_{DD}-V_P}{2}\\le V_{\\text{in}}\\le V_{DD}-V_P.\n\\]\n\nThus the circuit acts as an analog inverter with a small-signal slope of \\(-1\\); its switching point is approximately \\(V_{\\text{in}}=V_{\\text{out}}=V_{DD}/2\\).\n\n### Low input: \\(M_2\\) in triode\n\nFor \\(V_{\\text{in}}\\) below the saturation boundary, \\(M_2\\) is in triode. For identical devices, define\n\n\\[\nC=V_{DD}-V_P,\\qquad x=V_{DD}-V_{\\text{out}}.\n\\]\n\nCurrent equality becomes\n\n\\[\n2(C-V_{\\text{in}})x-x^2=(C-x)^2,\n\\]\n\ngiving the physical root\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}-\n\\frac{2C-V_{\\text{in}}\n-\\sqrt{(2C-V_{\\text{in}})^2-2C^2}}{2}\n}\n\\]\n\nfor \\(0\\le V_{\\text{in}}\\le C/2\\).\n\nFor \\(V_{\\text{in}}=0\\),\n\n\\[\nV_{OH}=V_{DD}-C\\left(1-\\frac{1}{\\sqrt2}\\right)\n      =V_P+\\frac{V_{DD}-V_P}{\\sqrt2}<V_{DD}.\n\\]\n\n### High input: both devices off\n\nFor \\(V_{\\text{in}}\\ge V_{DD}-V_P\\), \\(M_2\\) cuts off. \\(M_1\\) can discharge the output only until\n\n\\[\nV_{\\text{out}}\\simeq V_P,\n\\]\n\nbecause at that point \\(V_{SG1}=V_P\\) and \\(M_1\\) also turns off. Therefore:\n\n- \\(V_{OL}\\approx V_P\\), not zero;\n- below that voltage the output is effectively floating in the ideal model;\n- leakage, load, or initial charge determine the final floating voltage.\n\nFor a continuous input sweep from low to high, the approximate ideal VTC for identical devices is therefore\n\n\\[\nV_{\\text{out}}=\n\\begin{cases}\nV_{DD}-\\dfrac{2C-V_{\\text{in}}-\\sqrt{(2C-V_{\\text{in}})^2-2C^2}}{2},\n&0\\le V_{\\text{in}}\\le C/2,\\\\[1.2ex]\nV_{DD}-V_{\\text{in}},\n&C/2\\le V_{\\text{in}}\\le C,\\\\[1ex]\n\\approx V_P,\n&V_{\\text{in}}\\ge C.\n\\end{cases}\n\\]\n\n---\n\n## 3. Small-signal gain\n\nAt a bias point where \\(M_2\\) is saturated, \\(M_1\\) presents a source-looking resistance approximately\n\n\\[\nr_L\\simeq\\frac{1}{g_{m1}+g_{mb1}+g_{o1}}.\n\\]\n\nIncluding the output conductance of \\(M_2\\),\n\n\\[\nR_o\\simeq\n\\frac{1}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}},\n\\]\n\nand hence\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n-\\frac{g_{m2}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}.\n\\]\n\nThe negative sign follows because raising \\(v_{\\text{in}}\\) decreases the PMOS \\(M_2\\) current.\n\nIf \\(\\lambda=0\\) and \\(g_{mb1}=\\eta g_{m1}\\),\n\n\\[\nA_v\\simeq\n-\\frac{\\sqrt{k_2/k_1}}{1+\\eta}.\n\\]\n\nTherefore, for identical devices with no body effect,\n\n\\[\n\\boxed{A_v=-1}.\n\\]\n\nBody effect, finite output resistance, and operation of \\(M_2\\) in triode all reduce \\(|A_v|\\).\n\n---\n\n## 4. Body effect in a standard CMOS implementation\n\nIf both PMOS bodies are tied to \\(V_{DD}\\), \\(M_2\\) has no body effect, but \\(M_1\\) does because its source is at \\(V_{\\text{out}}\\). Approximately,\n\n\\[\n|V_{T1}|=\nV_{T0}+\\gamma_p\n\\left[\n\\sqrt{2|\\phi_F|+V_{DD}-V_{\\text{out}}}\n-\\sqrt{2|\\phi_F|}\n\\right].\n\\]\n\nConsequently:\n\n- the exact relation \\(V_{\\text{out}}=V_{DD}-V_{\\text{in}}\\) is lost;\n- the output is slightly higher than the ideal value;\n- the gain magnitude falls below unity;\n- the switching threshold shifts above \\(V_{DD}/2\\);\n- the low output level is still around a PMOS threshold rather than ground.\n\nIf an isolated well allows \\(M_1\\)'s body to be tied to its source, then \\(g_{mb1}=0\\) and the ideal \\(A_v=-1\\) result is recovered.\n\n---\n\n### Main conclusions\n\n- Both devices are PMOS; \\(M_1\\) is diode-connected.\n- The circuit is an **inverting common-source stage with a PMOS diode load**.\n- For matched devices in saturation, \\(V_{\\text{out}}\\approx V_{DD}-V_{\\text{in}}\\) and \\(A_v\\approx-1\\).\n- It has static current when both devices conduct.\n- It is not rail-to-rail: \\(V_{OH}<V_{DD}\\), and \\(V_{OL}\\approx |V_{Tp}|\\) or is floating.\n- Body effect and finite \\(r_o\\) further reduce the gain.",
        "format": "markdown",
        "sha256": "f54474c73ef2ca77efad962a095572fd6dde287365e906b8c76d914e83338897"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain grounded. Its small-signal expression reduces to the required gm/gm gain, approximately −gm2/gm1 when body effect and output conductance are neglected.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1417,
        "output_tokens": 31462,
        "total_tokens": 32879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29614,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1417,
        "output_tokens": 31462,
        "total_tokens": 32879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29614,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit interpretation\n\nThe source arrows indicate that both devices are **p-channel MOSFETs**, with the upper terminal of each transistor being its source. Thus:\n\n- \\(M_2:\\ S=V_{DD},\\ G=V_{in},\\ D=V_{out}\\) — a common-source pMOS.\n- \\(M_1:\\ S=V_{out},\\ G=D=0\\) — a **diode-connected pMOS load to ground**.\n\nThis is therefore not a CMOS inverter. It is an all-pMOS, ratioed inverter/common-source stage.\n\nAssume initially:\n\n\\[\nV_T\\equiv |V_{TP}|,\\qquad \n\\beta_i=\\mu_p C_{ox}(W/L)_i,\n\\]\n\nwith body tied to source, \\(\\lambda=0\\), and no output load.\n\n---\n\n## 2. Device operation\n\n### Load \\(M_1\\)\n\n\\[\nV_{SG1}=V_{SD1}=V_{out}.\n\\]\n\nIt turns on only when \\(V_{out}>V_T\\). Since\n\n\\[\nV_{SD1}=V_{out}\\ge V_{SG1}-V_T=V_{out}-V_T,\n\\]\n\nit is saturated whenever it conducts:\n\n\\[\nI_1=\\frac{\\beta_1}{2}(V_{out}-V_T)^2.\n\\]\n\n### Driver \\(M_2\\)\n\nDefine its overdrive\n\n\\[\nA=V_{DD}-V_{in}-V_T.\n\\]\n\nIt is:\n\n- off for \\(A\\le 0\\), i.e. \\(V_{in}\\ge V_{DD}-V_T\\);\n- saturated when \\(V_{out}\\le V_{in}+V_T\\):\n\n\\[\nI_2=\\frac{\\beta_2}{2}A^2;\n\\]\n\n- in triode when \\(V_{out}>V_{in}+V_T\\):\n\n\\[\nI_2=\\beta_2\\left[\nA(V_{DD}-V_{out})-\\frac{(V_{DD}-V_{out})^2}{2}\n\\right].\n\\]\n\nAt DC, \\(I_1=I_2=I\\).\n\n---\n\n## 3. Ideal dc transfer characteristic\n\nLet\n\n\\[\nB=V_{DD}-V_T,\\qquad\nr=\\sqrt{\\frac{\\beta_2}{\\beta_1}},\\qquad\nV_x=\\frac{r}{1+r}B.\n\\]\n\n### \\(0\\le V_{in}<V_x\\): \\(M_2\\) triode, \\(M_1\\) saturated\n\nWith \\(u=V_{out}-V_T\\), current equality gives\n\n\\[\n\\beta_2\\left[A^2-(u-V_{in})^2\\right]=\\beta_1u^2.\n\\]\n\nHence\n\n\\[\nV_{out}=V_T+\n\\frac{\nV_{in}+\\sqrt{(1+r^{-2})A^2-r^{-2}V_{in}^2}\n}{\n1+r^{-2}\n}.\n\\]\n\nIn particular, at \\(V_{in}=0\\),\n\n\\[\n\\boxed{\nV_{OH}=V_T+(V_{DD}-V_T)\n\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}\n}\n\\]\n\nso the high output reaches \\(V_{DD}\\) only if \\(\\beta_2\\gg\\beta_1\\).\n\n### \\(V_x\\le V_{in}<V_{DD}-V_T\\): both transistors saturated\n\nEquating the two saturation currents,\n\n\\[\n\\beta_2(V_{DD}-V_T-V_{in})^2\n=\n\\beta_1(V_{out}-V_T)^2,\n\\]\n\ngives\n\n\\[\n\\boxed{\nV_{out}\n=\nV_T+r\\,(V_{DD}-V_T-V_{in})\n}\n\\]\n\nand therefore\n\n\\[\n\\frac{dV_{out}}{dV_{in}}=-r\n=-\\sqrt{\\frac{\\beta_2}{\\beta_1}}.\n\\]\n\nThe digital switching point \\(V_{out}=V_{in}\\) is approximately\n\n\\[\nV_M=\\frac{V_T+r(V_{DD}-V_T)}{1+r}.\n\\]\n\n### \\(V_{in}\\ge V_{DD}-V_T\\): \\(M_2\\) off\n\n\\(M_1\\) discharges the output until \\(V_{out}\\) approaches \\(V_T\\), at which point it also turns off:\n\n\\[\n\\boxed{V_{OL}\\simeq V_T}\n\\]\n\nrather than zero. Strictly, for \\(V_{out}<V_T\\) both devices are off, so the low state is high-impedance/floating; leakage or an external load determines the final voltage.\n\n---\n\n## 4. Small-signal behavior\n\nIn the useful region where \\(M_2\\) is saturated, \\(M_1\\) presents a small-signal resistance of approximately \\(1/g_{m1}\\) looking into its source. More generally,\n\n\\[\nR_{out}\\simeq\n\\frac{1}{\ng_{m1}+g_{mb1}+g_{o1}+g_{o2}\n},\n\\]\n\nand\n\n\\[\n\\boxed{\nA_v\\simeq\n-\\frac{g_{m2}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}.\n\\]\n\nIf body effect and channel-length modulation are neglected,\n\n\\[\nR_{out}\\simeq\\frac{1}{g_{m1}},\\qquad\n\\boxed{\nA_v\\simeq-\\frac{g_{m2}}{g_{m1}}\n=-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n}\n\\]\n\nwhich agrees with the slope of the dc transfer curve.\n\n---\n\n## 5. Practical considerations\n\n- This is a **ratioed inverter**, not complementary CMOS: when both devices conduct there is a dc path from \\(V_{DD}\\) to ground and hence static power dissipation.\n- The output does not swing rail-to-rail: \\(V_{OH}<V_{DD}\\) and \\(V_{OL}\\approx V_T\\).\n- Gain and output high level depend on the size ratio \\(\\beta_2/\\beta_1\\).\n- If all pMOS bodies are tied to the common n-well at \\(V_{DD}\\), \\(M_1\\) has \\(V_{BS}=V_{DD}-V_{out}\\) and experiences body effect. Then \\(V_T\\) in the \\(M_1\\) equations must be replaced by \\(V_{T1}(V_{out})\\), and the gain becomes approximately\n\n\\[\nA_v\\simeq\n-\\frac{r}{1+g_{mb1}/g_{m1}},\n\\]\n\nwith further reduction from finite output resistances.\n\nThus the circuit functions as an **inverting pMOS common-source amplifier or logic inverter with a diode-connected pMOS load**, but with static current and degraded logic levels.",
        "format": "markdown",
        "sha256": "30125a81d27fdae665e19b70be98541a1a6c53d5dc100ceb94851861df505228"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain at ground. It also gives the required gm/gm gain, Av ≈ −gm2/gm1; the additional logic-level discussion does not replace the correct circuit interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1344,
        "input_tokens": 1417,
        "output_tokens": 35808,
        "total_tokens": 37225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1344,
        "input_tokens": 1417,
        "output_tokens": 35808,
        "total_tokens": 37225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nThe arrowed source terminals indicate two enhancement-mode **PMOS** transistors:\n\n- \\(M_2\\): source \\(=V_{DD}\\), gate \\(=V_{\\text{in}}\\), drain \\(=V_{\\text{out}}\\).\n- \\(M_1\\): source \\(=V_{\\text{out}}\\), gate \\(=0\\), drain \\(=0\\).\n\nSince the gate and drain of \\(M_1\\) are both at ground, \\(M_1\\) is **diode-connected**. It acts as a nonlinear pull-down load. \\(M_2\\) is a common-source PMOS pull-up device.\n\nThus this is an inverting, **ratioed PMOS-only inverter**, not a complementary CMOS inverter.\n\nAssume:\n\n- equal thresholds \\(V_P=|V_{TP}|\\),\n- \\(\\beta_i=\\mu_p C_{\\mathrm{ox}}(W/L)_i\\),\n- no channel-length modulation or body effect initially,\n- no dc load at the output,\n- \\(0\\leq V_{\\text{in}}\\leq V_{DD}\\).\n\nDefine\n\n\\[\nA=V_{DD}-V_P,\\qquad\nr=\\sqrt{\\frac{\\beta_2}{\\beta_1}}.\n\\]\n\n---\n\n## 2. Device currents\n\n### Lower transistor \\(M_1\\)\n\n\\[\nV_{SG1}=V_{SD1}=V_{\\text{out}}.\n\\]\n\nTherefore, whenever it is on,\n\n\\[\nV_{\\text{out}}>V_P,\n\\]\n\nit is always in saturation:\n\n\\[\nI_1=\\frac{\\beta_1}{2}\\left(V_{\\text{out}}-V_P\\right)^2.\n\\]\n\nIt turns off at \\(V_{\\text{out}}\\approx V_P\\).\n\n### Upper transistor \\(M_2\\)\n\nIt turns on when\n\n\\[\nV_{DD}-V_{\\text{in}}>V_P\n\\quad\\Longleftrightarrow\\quad\nV_{\\text{in}}<A.\n\\]\n\nIn saturation, which requires\n\n\\[\nV_{\\text{out}}\\leq V_{\\text{in}}+V_P,\n\\]\n\nits current is\n\n\\[\nI_2=\\frac{\\beta_2}{2}\\left(A-V_{\\text{in}}\\right)^2.\n\\]\n\nFor \\(V_{\\text{out}}>V_{\\text{in}}+V_P\\), \\(M_2\\) is in triode:\n\n\\[\nI_2=\\beta_2\\left[\n(A-V_{\\text{in}})(V_{DD}-V_{\\text{out}})\n-\\frac{1}{2}(V_{DD}-V_{\\text{out}})^2\n\\right].\n\\]\n\nAt dc, \\(I_1=I_2\\).\n\n---\n\n## 3. Voltage-transfer characteristic\n\n### High input: output low\n\nFor\n\n\\[\nV_{\\text{in}}\\geq A=V_{DD}-V_P,\n\\]\n\n\\(M_2\\) is off. \\(M_1\\) discharges the output until its source-gate voltage reaches the threshold:\n\n\\[\n\\boxed{V_{OL}\\approx V_P=|V_{TP}|}.\n\\]\n\nThus the output cannot reach ground. In the ideal square-law model, once both devices are off, any \\(V_{\\text{out}}\\leq V_P\\) is a floating equilibrium; following a normal high-to-low transition the output stops at \\(V_P\\).\n\n### Medium input: both transistors saturated\n\nEquating the two saturation currents gives\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_P+r\\left(A-V_{\\text{in}}\\right)\n}\n\\]\n\nvalid for\n\n\\[\n\\frac{rA}{1+r}\\leq V_{\\text{in}}<A.\n\\]\n\nThe transfer characteristic is a straight line here, with slope\n\n\\[\n\\boxed{\\frac{dV_{\\text{out}}}{dV_{\\text{in}}}=-r\n=-\\sqrt{\\frac{\\beta_2}{\\beta_1}} }.\n\\]\n\nThe inverter switching point \\(V_{\\text{in}}=V_{\\text{out}}=V_M\\) is\n\n\\[\n\\boxed{\nV_M=\\frac{V_P+rA}{1+r}\n}\n\\]\n\nprovided \\(V_{DD}>2V_P\\).\n\n### Low input: \\(M_2\\) in triode, \\(M_1\\) saturated\n\nFor\n\n\\[\nV_{\\text{in}}<\\frac{rA}{1+r},\n\\]\n\nlet\n\n\\[\nx=V_{DD}-V_{\\text{out}},\\qquad A_i=A-V_{\\text{in}}.\n\\]\n\nCurrent equality gives\n\n\\[\nr^2(2A_i x-x^2)=(A-x)^2,\n\\]\n\nor\n\n\\[\n(1+r^2)x^2-2(A+r^2A_i)x+A^2=0.\n\\]\n\nThe smaller root is the physical one, and \\(V_{\\text{out}}=V_{DD}-x\\).\n\nIn particular, for \\(V_{\\text{in}}=0\\),\n\n\\[\n\\boxed{\nV_{OH}\n=\nV_P+\\frac{(V_{DD}-V_P)r}{\\sqrt{1+r^2}}\n}.\n\\]\n\nHence \\(V_{OH}<V_{DD}\\). A high output close to \\(V_{DD}\\) requires\n\n\\[\n\\beta_2\\gg\\beta_1\n\\quad\\text{or}\\quad r\\gg1,\n\\]\n\ni.e. a much stronger \\(M_2\\) than \\(M_1\\).\n\nFor identical devices, \\(r=1\\):\n\n\\[\nV_{OH}=V_P+\\frac{V_{DD}-V_P}{\\sqrt 2},\\qquad\nV_{OL}=V_P,\\qquad\nV_M=\\frac{V_{DD}}{2},\n\\]\n\nand the gain in the both-saturation region is approximately \\(-1\\).\n\n---\n\n## 4. Small-signal gain\n\nIn the useful both-saturation bias region, \\(M_1\\) presents approximately a diode-connected conductance \\(g_{m1}\\) at the output. Neglecting output conductances,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n\\approx-\\frac{g_{m2}}{g_{m1}}\n=-\\sqrt{\\frac{\\beta_2}{\\beta_1}}=-r\n}.\n\\]\n\nIncluding channel-length modulation and, where applicable, body effect,\n\n\\[\n\\boxed{\nA_v=\n-\\frac{g_{m2}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}.\n\\]\n\nIf body effect is present but \\(g_o\\) is neglected,\n\n\\[\nA_v\\approx-\\frac{r}{1+\\eta},\n\\qquad\n\\eta=\\frac{g_{mb1}}{g_{m1}},\n\\]\n\nso body effect reduces the gain.\n\n---\n\n## 5. Body-effect caveat\n\nIf the three-terminal symbols imply that each PMOS body is tied to its source, \\(M_1\\)'s body follows \\(V_{\\text{out}}\\), and there is no body effect.\n\nIf instead both PMOS n-wells are tied to \\(V_{DD}\\), as in a common-well CMOS process, \\(M_1\\) has\n\n\\[\nV_{BS1}=V_{DD}-V_{\\text{out}},\n\\]\n\nso its threshold magnitude increases as the output falls. Then the low level is determined implicitly by\n\n\\[\nV_{OL}=|V_{TP1}(V_{OL})|,\n\\]\n\nand is generally larger than the zero-body-bias threshold \\(V_P\\).\n\n---\n\n## Overall behavior\n\n- The circuit is an **inverter**.\n- \\(M_2\\) is a common-source pull-up; \\(M_1\\) is a diode-connected pull-down.\n- The low level is degraded: \\(V_{OL}\\approx |V_{TP}|>0\\).\n- The high level is ratioed: \\(V_{OH}<V_{DD}\\) unless \\(M_2\\) is much stronger than \\(M_1\\).\n- There is a direct \\(V_{DD}\\)-to-ground static current whenever \\(M_2\\) is on.\n- A large gain and a high \\(V_{OH}\\) both require \\((W/L)_2\\gg(W/L)_1\\).\n\nTherefore, this is a ratioed, static-power-consuming PMOS inverter with poor rail-to-rail output levels, rather than a true CMOS inverter.",
        "format": "markdown",
        "sha256": "e6c59876720792a824231a58cc443bb09024af5ff234720737da8dcb87868b08"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies both devices as PMOS, recognizes M2 as the common-source input device and M1 as a diode-connected PMOS load with gate and drain grounded, and gives the required gm/gm gain, Av ≈ −gm2/gm1. The additional inverter and pull-down discussion does not replace the correct topology interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1344,
        "input_tokens": 1417,
        "output_tokens": 33405,
        "total_tokens": 34822,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31739,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1344,
        "input_tokens": 1417,
        "output_tokens": 33405,
        "total_tokens": 34822,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31739,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume both PMOS devices are in saturation, the bias voltages are ideal (ac ground), and \\(r_{oi}\\) includes channel-length modulation.\n\nWith \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) at ac ground, \\(M_2\\) appears from node \\(X\\) simply as \\(r_{o2}\\). The lower transistor \\(M_1\\) has its source at \\(X\\); if its body is tied to \\(V_{DD}\\), body effect gives an effective transconductance\n\n\\[\ng_{m1}^{*}=g_{m1}+g_{mb1}.\n\\]\n\nApply a test current \\(i_t\\) at the output and let the voltage at \\(X\\) be \\(v_x\\). KCL at \\(X\\) gives\n\n\\[\n\\frac{v_x-v_o}{r_{o1}}+g_{m1}^{*}v_x+\\frac{v_x}{r_{o2}}=0,\n\\qquad\ni_t=\\frac{v_x}{r_{o2}} .\n\\]\n\nHence\n\n\\[\n\\boxed{\nR_{\\text{out}}\n=r_{o1}+r_{o2}\n+(g_{m1}+g_{mb1})r_{o1}r_{o2}\n}\n\\]\n\nor, when \\(g_m r_o\\gg 1\\),\n\n\\[\n\\boxed{R_{\\text{out}}\\approx (g_{m1}+g_{mb1})r_{o1}r_{o2}}.\n\\]\n\nIf body effect is neglected (or \\(M_1\\)'s body is tied to its source), set \\(g_{mb1}=0\\):\n\n\\[\n\\boxed{R_{\\text{out}}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\n\\approx g_{m1}r_{o1}r_{o2}}.\n\\]\n\nFor \\(r_{o1}=r_{o2}=r_o\\), this becomes \\(R_{\\text{out}}\\approx g_{m1}r_o^2\\). Note that \\(g_{m2}\\) does not appear because both the gate and source of \\(M_2\\) are at ac ground. If channel-length modulation is completely neglected, \\(r_{o1},r_{o2}\\to\\infty\\) and \\(R_{\\text{out}}\\to\\infty\\).",
        "format": "markdown",
        "sha256": "d7607d040736a31ed5e8fa3fa2e4d337cbfcf6d2dbd68decac3cdcaa62dd6ccc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly treats both devices as PMOS, identifies M1 as the cascode device, and gives the correct full Rout expression and approximation. Body-effect discussion is also consistent with the stated assumptions.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2189,
        "output_tokens": 20674,
        "total_tokens": 22863,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2189,
        "output_tokens": 20674,
        "total_tokens": 22863,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) as ac ground. Since both the source and gate of \\(M_2\\) are at ac ground, node \\(X\\) sees only \\(r_{o2}\\) through \\(M_2\\).\n\nLet\n\n\\[\ng_{oi}=\\frac1{r_{oi}},\\qquad G_1=g_{m1}+g_{mb1},\n\\]\n\nwhere \\(g_{mb1}\\) accounts for body effect when the PMOS body is tied to \\(V_{DD}\\). Apply a test voltage \\(v_o\\) at the output and let the voltage at \\(X\\) be \\(v_x\\). KCL at \\(X\\) gives\n\n\\[\n\\frac{v_x}{r_{o2}}+(G_1+g_{o1})v_x-g_{o1}v_o=0.\n\\]\n\nThe test current entering the output is\n\n\\[\ni_t=g_{o1}v_o-(G_1+g_{o1})v_x\n   =\\frac{g_{o1}g_{o2}}{g_{o1}+g_{o2}+G_1}\\,v_o .\n\\]\n\nTherefore,\n\n\\[\n\\boxed{R_{\\text{out}}\n=r_{o1}+r_{o2}+(g_{m1}+g_{mb1})r_{o1}r_{o2}}\n\\]\n\nor, for large intrinsic gain,\n\n\\[\n\\boxed{R_{\\text{out}}\\approx (g_{m1}+g_{mb1})r_{o1}r_{o2}}.\n\\]\n\nIf body effect is neglected, set \\(g_{mb1}=0\\):\n\n\\[\n\\boxed{R_{\\text{out}}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\n\\approx g_{m1}r_{o1}r_{o2}}.\n\\]\n\nFor equal devices, \\(r_{o1}=r_{o2}=r_o\\), this becomes \\(2r_o+g_{m1}r_o^2\\approx g_{m1}r_o^2\\). Note that the gain-boosting transconductance is that of \\(M_1\\), not \\(M_2\\).",
        "format": "markdown",
        "sha256": "44a1b8c5e85c1fe0f587262f4ee4fea7af19bb29b95f05a7713018c0cc468741"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the full output-resistance expression with M1 as the cascode device and gives the appropriate approximation. Body effect is handled as optional, and explicitly naming both devices as PMOS is not required by the full-credit rule.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2112,
        "input_tokens": 2189,
        "output_tokens": 23655,
        "total_tokens": 25844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2112,
        "input_tokens": 2189,
        "output_tokens": 23655,
        "total_tokens": 25844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23214,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a PMOS cascode current source, with the output at the drain of \\(M_1\\). For small-signal resistance calculation, \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are AC grounds.\n\nLet\n\n\\[\ng_{o1}=\\frac1{r_{o1}},\\qquad g_{o2}=\\frac1{r_{o2}},\n\\]\n\nand define the effective source-control transconductance of \\(M_1\\) as\n\n\\[\nG_1=\n\\begin{cases}\ng_{m1}, & \\text{body effect neglected / body tied to source},\\\\[2mm]\ng_{m1}+g_{mb1}, & \\text{body of }M_1\\text{ tied to }V_{DD}.\n\\end{cases}\n\\]\n\nSince the gate and source of \\(M_2\\) are both at AC ground, node \\(X\\) sees \\(r_{o2}\\). Applying a test voltage \\(v_t\\) at the output gives\n\n\\[\n\\left(g_{o1}+g_{o2}+G_1\\right)v_x=g_{o1}v_t\n\\]\n\nand the test current is\n\n\\[\ni_t=g_{o1}v_t-\\left(g_{o1}+G_1\\right)v_x\n=\\frac{g_{o1}g_{o2}}{g_{o1}+g_{o2}+G_1}\\,v_t .\n\\]\n\nTherefore,\n\n\\[\n\\boxed{R_{\\text{out}}\n=r_{o1}+r_{o2}+G_1r_{o1}r_{o2}}\n\\]\n\nor, for \\(G_1r_{oi}\\gg1\\),\n\n\\[\n\\boxed{R_{\\text{out}}\\approx G_1r_{o1}r_{o2}}.\n\\]\n\nThus, neglecting body effect,\n\n\\[\n\\boxed{R_{\\text{out}}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\n\\approx g_{m1}r_{o1}r_{o2}}.\n\\]\n\nIf the PMOS bodies are tied to \\(V_{DD}\\), replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\). Note that \\(g_{m2}\\) does not appear because \\(M_2\\) has both its gate and source at AC ground and acts simply as \\(r_{o2}\\) at node \\(X\\).",
        "format": "markdown",
        "sha256": "a69ff262563307cfc1a2d7e520a72a6fe3f4140733bfac77de224dc66c751781"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode with M1 as the cascode device and derives the correct Rout expression using gm1 (with body effect optional).",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2112,
        "input_tokens": 2189,
        "output_tokens": 20518,
        "total_tokens": 22707,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20029,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2112,
        "input_tokens": 2189,
        "output_tokens": 20518,
        "total_tokens": 22707,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20029,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the **PMOS \\(M_2\\)**:\n\n- source: \\(V_{DD}\\)\n- drain: node \\(X\\)\n- gate: \\(V_{b2}\\)\n\n\\(M_2\\) is in saturation when\n\n\\[\nV_{SD2} \\ge V_{SG2}-|V_{TP2}|\n\\]\n\ni.e.\n\n\\[\nV_{DD}-V_X \\ge V_{DD}-V_{b2}-|V_{TP2}|\n\\]\n\nso\n\n\\[\n\\boxed{V_X \\le V_{b2}+|V_{TP2}|}\n\\]\n\nor equivalently, \\(M_2\\) needs enough \\(V_{SD}\\) headroom:\n\n\\[\nV_X \\le V_{DD}-V_{OV2}.\n\\]\n\nNow node \\(X\\) is set by \\(M_1\\). Since \\(M_1\\) is also PMOS, with source at \\(X\\) and gate at \\(V_{b1}\\),\n\n\\[\nV_X - V_{b1} = |V_{TP1}| + V_{OV1}\n\\]\n\nso\n\n\\[\nV_X = V_{b1}+|V_{TP1}|+V_{OV1}.\n\\]\n\nTherefore \\(M_2\\) is saturated if\n\n\\[\nV_{b1}+|V_{TP1}|+V_{OV1}\n\\le\nV_{b2}+|V_{TP2}|.\n\\]\n\nIf the two PMOS thresholds are approximately equal,\n\n\\[\n\\boxed{V_{b2} \\ge V_{b1}+V_{OV1}}\n\\]\n\nor\n\n\\[\n\\boxed{V_{b1} \\le V_{b2}-V_{OV1}}.\n\\]\n\nSo you ensure \\(M_2\\) stays in saturation by choosing \\(V_{b1}\\) low enough, or equivalently \\(V_{b2}\\) high enough, so that node \\(X\\) is sufficiently below \\(V_{DD}\\). In practice, use some margin and include body effect in \\(V_{TP1}\\).\n\nAlso, \\(M_1\\) must remain saturated:\n\n\\[\nV_{\\text{out}} \\le V_{b1}+|V_{TP1}|.\n\\]\n\nOtherwise node \\(X\\) can rise and push \\(M_2\\) out of saturation.",
        "format": "markdown",
        "sha256": "ba1a29dc927042f2cad0e7d2ad83ba65df4a1a97c1bc83696a541a3f7548a72d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and relates VX to Vb1 to derive the equivalent Vb1/overdrive condition. The extra M1 saturation note does not affect the essential answer.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 14783,
        "total_tokens": 16940,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14330,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 14783,
        "total_tokens": 16940,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14330,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the arrows indicate PMOS devices, \\(M_2\\) has\n\n\\[\nS=V_{DD},\\qquad G=V_{b2},\\qquad D=X .\n\\]\n\nFor a PMOS transistor, saturation requires\n\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{Tp2}|\n\\]\n\nso here\n\n\\[\nV_{DD}-V_X \\ge V_{DD}-V_{b2}-|V_{Tp2}|\n\\]\n\nor\n\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{Tp2}|}.\n\\]\n\nThus \\(M_2\\) is saturated only if the DC voltage at node \\(X\\) is sufficiently below \\(V_{DD}\\).\n\nAt a bias current \\(I\\), with \\(M_1\\) saturated,\n\n\\[\nV_X=V_{b1}+|V_{Tp1}|+V_{OV1},\n\\]\n\nwhere \\(V_{OV1}=V_{SG1}-|V_{Tp1}|\\). Therefore,\n\n\\[\n\\boxed{V_{b1}+|V_{Tp1}|+V_{OV1}\\le V_{b2}+|V_{Tp2}|}.\n\\]\n\nIf the two thresholds are equal,\n\n\\[\n\\boxed{V_{b2}-V_{b1}\\ge V_{OV1}}.\n\\]\n\nIn practice a margin is required:\n\n\\[\nV_{b2}-V_{b1}>V_{OV1}.\n\\]\n\nEquivalently, choose\n\n\\[\nV_X\\le V_{DD}-V_{OV2}-V_{\\text{margin}},\n\\]\n\nwhere \\(V_{OV2}\\) is the overdrive of \\(M_2\\), and then set\n\n\\[\nV_{b1}=V_X-|V_{Tp1}|-V_{OV1},\\qquad\nV_{b2}=V_{DD}-|V_{Tp2}|-V_{OV2}.\n\\]\n\nThese voltages are normally generated with a replica or wide-swing cascode bias circuit. Also ensure that \\(M_1\\) remains saturated:\n\n\\[\nV_{\\text{out}}\\le V_{b1}+|V_{Tp1}|.\n\\]\n\nIf \\(M_1\\) enters triode, \\(V_X\\) is no longer fixed by \\(V_{b1}\\) and the current, so \\(M_2\\)'s saturation must be rechecked. Body effect in \\(M_1\\), process variation, and signal swing should be included in the bias margin.",
        "format": "markdown",
        "sha256": "779c806a49b4e450459a9a1a3f238c19cbf41ee10c7b51e51207541ea20a7c57"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and relates VX to Vb1 to derive the equivalent bias condition. The additional bias and margin details are consistent.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2157,
        "output_tokens": 15040,
        "total_tokens": 17197,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14549,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2157,
        "output_tokens": 15040,
        "total_tokens": 17197,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14549,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The upper terminals are the sources of the two PMOS devices. Let the lower output node be \\(V_o\\).\n\nFor \\(M_2\\),\n\n\\[\nV_{SD2}=V_{DD}-V_X,\n\\qquad\nV_{OV2}=V_{SG2}-|V_{Tp2}|\n       =V_{DD}-V_{b2}-|V_{Tp2}|.\n\\]\n\nThus \\(M_2\\) is in saturation when\n\n\\[\nV_{SD2}\\ge V_{OV2}\n\\]\n\nor equivalently\n\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{Tp2}|=V_{DD}-V_{OV2}}. \\tag{1}\n\\]\n\nFor a given bias current, \\(M_1\\) determines \\(V_X\\):\n\n\\[\nV_X=V_{b1}+|V_{SG1}|\n   =V_{b1}+|V_{Tp1}(V_X)|+V_{OV1},\n\\]\n\nwhere, neglecting channel-length modulation,\n\n\\[\nV_{OV1}\\simeq\n\\sqrt{\\frac{2I}{\\mu_p C_{\\rm ox}(W/L)_1}}.\n\\]\n\nCombining with (1), choose the bias voltages such that\n\n\\[\n\\boxed{\nV_{b1}+|V_{Tp1}|+V_{OV1}\n\\le V_{b2}+|V_{Tp2}|\n}\n\\]\n\nor\n\n\\[\nV_{b2}-V_{b1}\n\\ge V_{OV1}+|V_{Tp1}|-|V_{Tp2}|.\n\\]\n\nIf body effect is negligible and the thresholds are equal, this reduces to\n\n\\[\n\\boxed{V_{b2}\\gtrsim V_{b1}+V_{OV1}}.\n\\]\n\nFor equal overdrives \\(V_{OV}\\), the usual low-voltage/wide-swing bias is\n\n\\[\nV_{b2}=V_{DD}-|V_T|-V_{OV},\\qquad\nV_{b1}=V_{DD}-|V_T|-2V_{OV},\n\\]\n\nwhich places \\(M_2\\) at the edge of saturation. In a real design, lower \\(V_{b1}\\) slightly or provide another saturation margin.\n\nAlso \\(M_1\\) must remain saturated:\n\n\\[\nV_o\\le V_{b1}+|V_{Tp1}|,\n\\]\n\ngiving an output-headroom limit of approximately\n\n\\[\nV_{o,\\max}\\approx V_{DD}-V_{OV1}-V_{OV2}.\n\\]\n\nIf \\(M_1\\)'s body is tied to \\(V_{DD}\\), its body effect makes \\(|V_{Tp1}|>|V_{Tp2}|\\), requiring a larger \\(V_{b2}-V_{b1}\\). Therefore, practical designs use a replica/wide-swing bias circuit, include body effect, and verify the inequality over PVT, mismatch, and the full output-voltage range.",
        "format": "markdown",
        "sha256": "300142de6b72fa54a73c44a8674f27cee4125a8e633b9540d3fa5a99919058ce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, and relates VX to Vb1 to derive the required bias inequality. The additional headroom and body-effect discussion does not undermine the essential answer.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2157,
        "output_tokens": 21739,
        "total_tokens": 23896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21150,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2157,
        "output_tokens": 21739,
        "total_tokens": 23896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21150,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS cascode amplifier**: \\(M_1\\) is common-source, \\(M_2\\) is common-gate, and \\(I_1\\) is an ideal current-source load.\n\nAssume both MOSFETs are in saturation, \\(V_{DD}\\) and \\(V_{b1}\\) are ac grounds, and \\(v_{in},v_x,v_{out}\\) are small-signal quantities.\n\n## 1. DC operating point\n\nSince the gates draw no dc current and the output is otherwise unloaded,\n\n\\[\nI_{D1}=I_{D2}=I_1.\n\\]\n\nUsing a square-law model with channel-length modulation,\n\n\\[\nI_1 \\simeq \\frac{k_1}{2}(V_{in}-V_{TH1})^2(1+\\lambda_1V_X),\n\\]\n\n\\[\nI_1 \\simeq \\frac{k_2}{2}\n\\left[V_{b1}-V_X-V_{TH2}(V_X)\\right]^2\n\\left[1+\\lambda_2(V_{out}-V_X)\\right].\n\\]\n\nThus \\(V_{b1}\\) approximately sets \\(V_X\\), while \\(V_{out}\\) adjusts so that the two device currents equal \\(I_1\\). Saturation requires\n\n\\[\nV_X \\ge V_{OV1}, \\qquad V_{out}-V_X\\ge V_{OV2},\n\\]\n\nand the upper current source needs enough voltage compliance below \\(V_{DD}\\).\n\nIf channel-length modulation is completely neglected, \\(V_{out}\\) does not affect either current, so its dc value is indeterminate within the saturation/headroom range. A finite \\(r_o\\), a finite current-source output resistance, or feedback is needed to establish a well-defined operating point.\n\n---\n\n## 2. Low-frequency small-signal gain\n\nLet\n\n\\[\ng_{oi}=\\frac{1}{r_{oi}},\\qquad\nG_2=g_{m2}+g_{mb2},\n\\]\n\nwhere \\(g_{mb2}\\) accounts for the body effect of \\(M_2\\). If its body is tied to its source or body effect is neglected, \\(g_{mb2}=0\\).\n\nFor \\(M_1\\), the drain current from \\(X\\) to ground is\n\n\\[\ni_1=g_{m1}v_{in}+g_{o1}v_x.\n\\]\n\nFor \\(M_2\\), with gate and body at ac ground, the drain current from \\(V_{out}\\) to \\(X\\) is\n\n\\[\n\\begin{aligned}\ni_2\n&=g_{o2}(v_{out}-v_x)-g_{m2}v_x-g_{mb2}v_x\\\\\n&=g_{o2}v_{out}-(g_{o2}+G_2)v_x .\n\\end{aligned}\n\\]\n\nAn ideal current source has zero incremental current, so at \\(V_{out}\\)\n\n\\[\ni_2=0.\n\\]\n\nKCL at \\(X\\) consequently gives \\(i_1=i_2=0\\). Therefore,\n\n\\[\nv_x=-g_{m1}r_{o1}v_{in},\n\\]\n\nand\n\n\\[\nv_{out}=(1+G_2r_{o2})v_x.\n\\]\n\nHence the voltage gain is\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=-g_{m1}r_{o1}\\left[1+(g_{m2}+g_{mb2})r_{o2}\\right]\n}\n\\]\n\nand, for \\(g_{m2}r_{o2}\\gg1\\),\n\n\\[\n\\boxed{\nA_v\\approx -g_{m1}(g_{m2}+g_{mb2})r_{o1}r_{o2}.\n}\n\\]\n\nIf body effect is neglected,\n\n\\[\n\\boxed{\nA_v\\approx -(g_{m1}r_{o1})(g_{m2}r_{o2}),\n}\n\\]\n\ni.e. approximately the product of the two intrinsic gains. The gain is inverting and can be very large.\n\n---\n\n## 3. Output impedance\n\nWith \\(v_{in}=0\\), the resistance looking into the drain of \\(M_2\\) is\n\n\\[\n\\boxed{\nR_o=r_{o1}+r_{o2}+(g_{m2}+g_{mb2})r_{o1}r_{o2}\n}\n\\]\n\n\\[\nR_o\\approx (g_{m2}+g_{mb2})r_{o1}r_{o2}.\n\\]\n\nThe ideal current source has infinite small-signal resistance, so it does not reduce \\(R_o\\). A Norton-equivalent model gives\n\n\\[\nG_{m,\\mathrm{eff}}\n=\ng_{m1}\\frac{g_{o2}+G_2}{g_{o1}+g_{o2}+G_2}\n\\approx g_{m1}.\n\\]\n\nIf the upper current source has finite output resistance \\(R_L\\), or if an external resistive load is present,\n\n\\[\n\\boxed{\nA_v=-G_{m,\\mathrm{eff}}(R_o\\parallel R_L)\n\\approx -g_{m1}(R_o\\parallel R_L).\n}\n\\]\n\nThe low-frequency input resistance is approximately infinite because the input is a MOSFET gate.\n\nFor \\(r_{o1},r_{o2}\\rightarrow\\infty\\) and an ideal current source, the small-signal gain becomes unbounded and the dc output point is not defined; any current mismatch charges the output capacitance until a device leaves saturation. In practice, finite \\(r_o\\), current-source compliance, body effect, and feedback set the actual gain and bias point.",
        "format": "markdown",
        "sha256": "24bc7e586d1d45a370b8e5ba7d89c64ad5b42463a404641fbe784ff6b5e4619a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the equivalent ideal-load gain expression. The additional analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 21779,
        "total_tokens": 22883,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 21779,
        "total_tokens": 22883,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume low-frequency small-signal operation, both NMOS devices in saturation, \\(V_{DD}\\) and \\(V_{b1}\\) are ac ground, and the body of \\(M_2\\) is tied to the substrate. Define\n\n\\[\ng_{oi}=\\frac1{r_{oi}},\\qquad G_2=g_{m2}+g_{mb2},\n\\]\n\nwhere \\(g_{mb2}=0\\) if body effect is neglected or the body is tied to the source.\n\n## 1. DC operation\n\nThe ideal source fixes\n\n\\[\nI_{D1}=I_{D2}=I_1.\n\\]\n\nFor example, using a square-law model with channel-length modulation,\n\n\\[\nI_1\\simeq \\frac{\\beta_1}{2}(V_{in,Q}-V_{T1})^2(1+\\lambda_1V_X),\n\\]\n\n\\[\nI_1\\simeq \\frac{\\beta_2}{2}\n[V_{b1}-V_X-V_{T2}(V_X)]^2\n[1+\\lambda_2(V_{out,Q}-V_X)].\n\\]\n\nThese determine \\(V_X\\) and \\(V_{out,Q}\\). The saturation requirements are approximately\n\n\\[\nV_X\\ge V_{OV1},\\qquad\nV_{out}-V_X\\ge V_{OV2},\n\\]\n\nso the lower output swing limit is roughly \\(V_{OV1}+V_{OV2}\\). The upper limit is set by the compliance voltage of the current source:\n\n\\[\nV_{out}\\lesssim V_{DD}-V_{\\text{compliance}}.\n\\]\n\nThus the cascode gives high gain but less output swing than a simple common-source stage.\n\n## 2. Low-frequency voltage gain\n\nThe ideal current source has zero small-signal current. Therefore, at low frequency and with no load or capacitance,\n\n\\[\n\\Delta i_{D2}=0.\n\\]\n\nKCL at node \\(X\\) then also gives \\(\\Delta i_{D1}=0\\).\n\nThe small-signal drain currents are\n\n\\[\ni_{d1}=g_{m1}v_{in}+g_{o1}v_X,\n\\]\n\n\\[\ni_{d2}\n=-G_2v_X+g_{o2}(v_{out}-v_X)\n=g_{o2}v_{out}-(G_2+g_{o2})v_X.\n\\]\n\nSetting \\(i_{d1}=0\\),\n\n\\[\n\\boxed{\\frac{v_X}{v_{in}}=-g_{m1}r_{o1}}.\n\\]\n\nThus a positive input signal makes node \\(X\\) move downward strongly. Setting \\(i_{d2}=0\\),\n\n\\[\n\\boxed{\\frac{v_{out}}{v_X}=1+G_2r_{o2}}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v\\equiv\\frac{v_{out}}{v_{in}}\n=-g_{m1}r_{o1}\\left[1+G_2r_{o2}\\right]\n}\n\\]\n\nor, neglecting body effect,\n\n\\[\n\\boxed{\nA_v=-g_{m1}r_{o1}(1+g_{m2}r_{o2})\n=-g_{m1}\\left[r_{o1}+g_{m2}r_{o1}r_{o2}\\right]\n}\n\\]\n\nand for \\(g_{m2}r_{o2}\\gg1\\),\n\n\\[\n\\boxed{A_v\\simeq -g_{m1}g_{m2}r_{o1}r_{o2}}.\n\\]\n\nFor identical devices this is approximately \\(-(g_mr_o)^2\\), i.e. roughly the square of the intrinsic gain. The stage is inverting.\n\n## 3. Output resistance and Norton equivalent\n\nApplying a test voltage at the output with \\(v_{in}=0\\) gives\n\n\\[\n\\boxed{\nR_o=r_{o1}+r_{o2}+G_2r_{o1}r_{o2}\n\\simeq G_2r_{o1}r_{o2}.\n}\n\\]\n\nThe exact short-circuit transconductance of the cascode branch is\n\n\\[\n\\boxed{\nG_m=\ng_{m1}\\frac{G_2+g_{o2}}\n{G_2+g_{o2}+g_{o1}}\n\\simeq g_{m1}.\n}\n\\]\n\nHence the transistor branch can be represented by\n\n\\[\ni_o=G_m v_{in}+\\frac{v_{out}}{R_o},\n\\]\n\nand, for the ideal current-source load,\n\n\\[\nA_v=-G_mR_o,\n\\]\n\nwhich simplifies to the exact result above. The frequently used expression \\(-g_{m1}R_o\\) is a close approximation; it contains an extra lower-order \\(g_{m1}r_{o2}\\) term because it assumes \\(G_m=g_{m1}\\).\n\nIf the current source has finite output resistance \\(r_{oc}\\), or an external load \\(R_L\\) is present,\n\n\\[\n\\boxed{\nA_v=-G_m\\left(R_o\\parallel r_{oc}\\parallel R_L\\right)\n\\simeq -g_{m1}\\left(R_o\\parallel r_{oc}\\parallel R_L\\right).\n}\n\\]\n\n## 4. Practical considerations\n\n- Finite \\(r_o\\) is essential: if \\(\\lambda\\to0\\), \\(R_o\\to\\infty\\), and the ideal model predicts unbounded/undefined gain. A real current-source output resistance, load, or loss of saturation limits the gain.\n- If \\(V_{b1}\\) has a small perturbation \\(v_{b1}\\), then with \\(v_{in}=0\\),\n\n  \\[\n  \\frac{v_{out}}{v_{b1}}\\simeq -g_{m2}r_{o2},\n  \\]\n\n  so a low-noise, low-impedance bias is important.\n- With an output capacitance \\(C_L\\), the dominant pole is approximately\n\n  \\[\n  \\omega_{p,o}\\simeq \\frac{1}{(R_o\\parallel r_{oc})C_L},\n  \\]\n\n  while the internal-node pole is typically near \\(G_2/C_X\\), where \\(C_X\\) is the capacitance at node \\(X\\). The gain-bandwidth product is roughly \\(g_{m1}/C_L\\).\n\nThus the circuit is a high-output-resistance, high-gain inverting cascode amplifier, with gain of order \\((g_mr_o)^2\\) when the current-source load is ideal.",
        "format": "markdown",
        "sha256": "57a4e92d41fb66f835ce9849d2eeef711662f8b8a9efee01e2274466964dcfb4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly analyzes M1 as the input device and M2 as the NMOS cascode, deriving the ideal-load gain \\(-g_{m1}r_{o1}[1+(g_{m2}+g_{mb2})r_{o2}]\\), equivalent to the golden result.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1104,
        "output_tokens": 24744,
        "total_tokens": 25848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23465,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1104,
        "output_tokens": 24744,
        "total_tokens": 25848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23465,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nThis is a **telescopic NMOS cascode amplifier**:\n\n- \\(M_1\\): common-source device driven by \\(V_{\\text{in}}\\)\n- \\(M_2\\): common-gate device with \\(V_{b1}\\) AC-grounded\n- \\(I_1\\): ideal current-source load\n- Node \\(X\\): drain of \\(M_1\\) and source of \\(M_2\\)\n\nAssume both devices operate in saturation, \\(V_{DD}\\) and \\(V_{b1}\\) are AC ground, and low-frequency operation.\n\n---\n\n## DC operation and headroom\n\nAt the bias point,\n\n\\[\nI_{D1}=I_{D2}=I_1 .\n\\]\n\nThe input bias must be chosen so that \\(M_1\\) draws exactly \\(I_1\\). The saturation conditions are\n\n\\[\nV_X\\ge V_{OV1},\n\\]\n\n\\[\nV_{\\text{out}}-V_X\\ge V_{OV2},\n\\qquad\nV_{OV2}=V_{b1}-V_X-V_{T2}(V_X),\n\\]\n\nand the upper current source requires\n\n\\[\nV_{DD}-V_{\\text{out}}\\ge V_{\\min,I_1}.\n\\]\n\nIf \\(V_{b1}\\) is chosen so that \\(V_X\\simeq V_{OV1}\\), the minimum output voltage is approximately\n\n\\[\nV_{\\text{out,min}}\\simeq V_{OV1}+V_{OV2}.\n\\]\n\nThe cascode therefore provides gain at the cost of reduced output swing.\n\n---\n\n## Small-signal voltage gain\n\nLet\n\n\\[\ng_{oi}=\\frac{1}{r_{oi}}\\simeq \\lambda_i I_1,\n\\qquad\nG_2=g_{m2}+g_{mb2},\n\\]\n\nwhere \\(g_{mb2}\\) accounts for body effect because the source of \\(M_2\\) is not at AC ground. If body effect is neglected or the body is tied to the source, set \\(g_{mb2}=0\\).\n\nUsing lowercase letters for small signals, the drain currents are\n\n\\[\ni_1=g_{m1}v_{\\text{in}}+g_{o1}v_X,\n\\]\n\n\\[\ni_2=g_{o2}(v_{\\text{out}}-v_X)-G_2v_X\n     =g_{o2}v_{\\text{out}}-(g_{o2}+G_2)v_X .\n\\]\n\nFor an ideal current-source load, its incremental current is zero. With an unloaded output,\n\n\\[\ni_2=0,\n\\]\n\nand KCL at node \\(X\\) gives \\(i_1=i_2=0\\). Therefore,\n\n\\[\nv_X=-g_{m1}r_{o1}v_{\\text{in}},\n\\]\n\nand from \\(i_2=0\\),\n\n\\[\n\\frac{v_{\\text{out}}}{v_X}=1+G_2r_{o2}.\n\\]\n\nHence the exact low-frequency gain is\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=-g_{m1}r_{o1}\n\\left[1+(g_{m2}+g_{mb2})r_{o2}\\right]\n}\n\\]\n\nor, without body effect,\n\n\\[\n\\boxed{\nA_v=-g_{m1}r_{o1}(1+g_{m2}r_{o2})\n\\approx -g_{m1}g_{m2}r_{o1}r_{o2}.\n}\n\\]\n\nThus the gain is approximately the product of the intrinsic gains of the two transistors and is inverting. For identical devices with \\(g_{m1}=g_{m2}=g_m\\), \\(r_{o1}=r_{o2}=r_o\\), and no body effect,\n\n\\[\nA_v=-(g_mr_o)(1+g_mr_o)\\approx -(g_mr_o)^2.\n\\]\n\n---\n\n## Output and input resistance\n\nSetting \\(v_{\\text{in}}=0\\) and applying a test voltage at the output gives\n\n\\[\n\\boxed{\nR_{o,\\text{cas}}\n=r_{o1}+r_{o2}\n+(g_{m2}+g_{mb2})r_{o1}r_{o2}\n}\n\\]\n\nand usually\n\n\\[\nR_{o,\\text{cas}}\\approx\n(g_{m2}+g_{mb2})r_{o1}r_{o2}.\n\\]\n\nThe low-frequency input resistance of the MOS gate is essentially infinite.\n\nAn exact Norton model of the lower cascode is\n\n\\[\ni_2=G_{m,\\text{eff}}v_{\\text{in}}+\\frac{v_{\\text{out}}}{R_{o,\\text{cas}}},\n\\]\n\nwith\n\n\\[\nG_{m,\\text{eff}}\n=g_{m1}\n\\frac{g_{o2}+G_2}\n     {g_{o1}+g_{o2}+G_2}\n\\approx g_{m1}.\n\\]\n\nConsequently, one often writes the familiar approximation\n\n\\[\nA_v\\simeq -g_{m1}\\left(r_L\\parallel R_{o,\\text{cas}}\\right),\n\\]\n\nwhere \\(r_L\\) is the output resistance of a practical top current source. For an ideal current source, \\(r_L\\to\\infty\\). The exact gain with finite \\(r_L\\) is\n\n\\[\n\\boxed{\nA_v=\n-\\frac{g_{m1}(g_{o2}+G_2)}\n{g_{o1}g_{o2}+\nr_L^{-1}(g_{o1}+g_{o2}+G_2)}\n}.\n\\]\n\n---\n\n## Important ideal-model limit\n\nIf channel-length modulation is neglected for both devices, \\(r_{o1},r_{o2}\\to\\infty\\). With an ideal current source, all three elements are ideal current sources in series:\n\n- fixed \\(I_1\\) fixes \\(V_{GS1}\\), so \\(V_{\\text{in}}\\) cannot change in the ideal model;\n- \\(V_{\\text{out}}\\) has no effect on the current and is undetermined within the saturation/headroom range.\n\nThus the gain becomes unbounded or, more precisely, the small-signal operating point is singular. Finite transistor output resistance, a nonideal current source, or leaving saturation provides the finite gain observed in a real circuit.",
        "format": "markdown",
        "sha256": "17a54f64cfab7a9516f9c641af11a2f20e568ec1917c8a14727e743c3ac53a32"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression specified by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1104,
        "output_tokens": 25363,
        "total_tokens": 26467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24086,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1104,
        "output_tokens": 25363,
        "total_tokens": 26467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24086,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**As drawn, not in the conventional sense.**\n\nA cascode is a cascade of:\n\n- a **common-source / common-emitter** input device \\(M_1\\), and\n- a **common-gate / common-base** device \\(M_2\\),\n\nwith the **drain (collector) of \\(M_1\\)** connected to the **source (emitter) of \\(M_2\\)**:\n\n\\[\nV_{DD}\\!-\\!R_D\\!-\\!D(M_2),\\qquad S(M_2)\\rightarrow D(M_1),\\qquad S(M_1)\\rightarrow 0 .\n\\]\n\nIn the figure, the arrows indicate that the middle node connects the **sources/emitters of both devices**. Thus \\(M_1\\)'s drain/collector is grounded, making \\(M_1\\) a common-drain/collector (follower), while \\(M_2\\) is common-gate/base. This is a source/emitter-coupled complementary cascade, not a standard telescopic cascode, and it does not provide the usual cascode output-resistance enhancement.\n\nIf \\(M_1\\) were intended to have its **source at ground** and its **drain at the middle node**—i.e. the source/body arrow is being ignored—then that redrawn circuit would indeed be the standard cascode: \\(M_1\\) CS + \\(M_2\\) CG, with \\(V_{b1}\\) acting as AC ground. Stacking two transistors alone is therefore not sufficient; the source/drain orientation matters.",
        "format": "markdown",
        "sha256": "1469d76fcfc4e6efbd06c9e9c82fd50bc7fe6b2efeb69537ab0130ec1a774c36"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says the circuit is not a conventional cascode: M1 is a common-drain/source-follower device and M2 is common-gate, so the usual cascode output-resistance enhancement is absent.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1166,
        "output_tokens": 26324,
        "total_tokens": 27490,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1166,
        "output_tokens": 26324,
        "total_tokens": 27490,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Not as drawn—assuming the arrows are the conventional MOS source/body arrows.**\n\n- The source of \\(M_2\\) is its lower terminal.\n- The source of \\(M_1\\) is its upper terminal, while its drain is grounded.\n\nThus the two devices are connected **source-to-source**. \\(M_1\\) is a common-drain/source-follower stage, and \\(M_2\\) (with \\(V_{b1}\\) at AC ground) is a common-gate stage. This is a complementary common-drain \\(\\rightarrow\\) common-gate cascade, not a conventional cascode.\n\nA cascode requires:\n\n\\[\n\\text{drain of a common-source }M_1 \\;\\longrightarrow\\; \\text{source of a common-gate }M_2,\n\\]\n\nwith \\(M_1\\)'s source at AC ground. That connection gives the familiar large output resistance, approximately \\(g_m r_o^2\\); here \\(M_2\\)'s source sees the low source-follower impedance \\(\\sim 1/g_{m1}\\), so that cascode output-resistance enhancement is absent.\n\nIf \\(M_1\\) was instead intended to be an NMOS with its **source at ground and drain at the middle node**, then that alternate topology would be the ordinary NMOS cascode. The arrows in the shown symbols indicate otherwise.",
        "format": "markdown",
        "sha256": "060c564387f3301f3e355b504fd09211a6f3d69d69eda215551a299d420b391c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with its drain grounded, distinguishes it from the common-source device required for a cascode, and explains that the low source-follower impedance prevents cascode output-resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1088,
        "input_tokens": 1166,
        "output_tokens": 22145,
        "total_tokens": 23311,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21861,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1088,
        "input_tokens": 1166,
        "output_tokens": 22145,
        "total_tokens": 23311,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21861,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends on how the transistor source/body arrows are intended.\n\nLet \\(X\\) be the node between \\(M_1\\) and \\(M_2\\). A conventional NMOS cascode has the terminal sequence\n\n\\[\n\\text{ground}-S_1-D_1(=X)-S_2-D_2-V_{\\text{out}},\n\\]\n\nso that:\n\n- \\(M_1\\) is a **common-source** stage, with \\(V_{\\rm in}\\) at its gate;\n- \\(M_2\\) is a **common-gate** stage, since \\(V_{b1}\\) is AC-grounded;\n- the drain of \\(M_1\\) drives the source of \\(M_2\\).\n\nUnder that interpretation—both devices NMOS, with \\(M_1\\)'s source grounded—the circuit **is a telescopic cascode**, with approximately\n\n\\[\nR_{\\text{out}}\\simeq r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}.\n\\]\n\nHowever, reading the arrow symbols literally, the drawing appears to show complementary devices whose **sources are joined at \\(X\\)**: \\(M_2\\)'s source is its lower terminal and \\(M_1\\)'s source is its upper terminal, while \\(M_1\\)'s drain is grounded. Then \\(M_1\\) is not a common-source stage, the middle node is a source–source connection, and the circuit **is not a conventional cascode**; it will not provide the usual cascode output-resistance enhancement.\n\nSo:\n\n- **Both NMOS, \\(S_1\\) at ground:** yes, a cascode.\n- **As literally indicated by the opposite source arrows:** no, it is a complementary source-coupled stack, not a standard cascode.",
        "format": "markdown",
        "sha256": "d731531cd3e099538884b7f54b1b725823472a5b36ea87c91151d60a3361c174"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer correctly concludes that the literal circuit is not a cascode and identifies M1’s grounded drain, source at X, and lack of cascode resistance enhancement. It does not clearly identify M1 as a PMOS source follower, and the hypothetical alternative adds unnecessary ambiguity.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1088,
        "input_tokens": 1166,
        "output_tokens": 23895,
        "total_tokens": 25061,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23520,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1088,
        "input_tokens": 1166,
        "output_tokens": 23895,
        "total_tokens": 25061,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23520,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is reduced in a cascode because the **input device is isolated from the high-gain output node**.\n\nIn an ordinary common-source/common-emitter stage, the feedback capacitance between input and output — \\(C_{gd}\\) for MOS or \\(C_\\mu\\) for BJT — sees a large voltage gain. If the stage gain is\n\n\\[\nA_v=\\frac{v_o}{v_i}\\approx -A\n\\]\n\nthen the effective input capacitance is\n\n\\[\nC_{\\text{in}} \\approx C_f(1-A_v)=C_f(1+A),\n\\]\n\nso \\(C_f\\) is greatly multiplied. This is the Miller effect.\n\nIn a cascode, the input transistor’s drain/collector is connected to the source/emitter of a common-gate/common-base transistor. That intermediate node is a **low-impedance node** and its voltage changes only slightly. To first order,\n\n\\[\n\\frac{v_x}{v_i} \\approx -\\frac{g_{m1}}{g_{m2}},\n\\]\n\nso for similar devices its magnitude is around 1, not a large voltage gain. Therefore the capacitance \\(C_{gd1}\\) or \\(C_{\\mu1}\\) of the input transistor is multiplied only by roughly\n\n\\[\n1+\\frac{g_{m1}}{g_{m2}},\n\\]\n\noften about 2, instead of by the large gain \\(1+g_mR_{\\text{out}}\\).\n\nMeanwhile, the **large voltage swing occurs at the upper transistor’s drain/collector**, but that node is shielded from the input by the common-gate/common-base device. Its gate/base is AC-grounded, so capacitances from the output to that node mainly load the output rather than feed back to the input.\n\nSo, in short:\n\n- Miller effect depends on gain across the capacitance connected to the input.\n- A cascode keeps the input transistor’s drain/collector voltage nearly constant.\n- The high-gain output node is isolated from the input.\n- Hence the effective input capacitance is much smaller and bandwidth is improved.\n\nThe Miller effect is not completely eliminated, but it is greatly reduced.",
        "format": "markdown",
        "sha256": "fc57bb0825a3b6f18d412dce37884ee414d5b29a97381117752d0beae76070e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance intermediate node and shows that the input transistor’s capacitance sees a gain of roughly unity, giving about a 2× Miller multiplication rather than the full stage gain. The Miller effect is reduced, not eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 9926,
        "total_tokens": 9960,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9486,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 9926,
        "total_tokens": 9960,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9486,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect depends on the **voltage gain between the two terminals of a capacitance**, not just on the overall gain of the amplifier.\n\nFor a capacitance \\(C\\) between an input node and another node with gain\n\n\\[\nA_x=\\frac{v_x}{v_i},\n\\]\n\nthe apparent input capacitance is\n\n\\[\nC_{\\text{in}} = C(1-A_x).\n\\]\n\nIn an ordinary common-source/common-emitter stage, the feedback capacitance \\(C_{gd}\\) or \\(C_{\\mu}\\) connects the input to the **high-gain output node**:\n\n\\[\nA_x \\approx -g_m R_L \\quad \\Rightarrow \\quad C_{\\text{in}}\\approx C(1+g_m R_L),\n\\]\n\nso the Miller multiplication can be very large.\n\nIn a cascode, the lower transistor’s drain/collector is not the high-swing output. It is connected to the source/emitter of the upper common-gate/common-base transistor. That node has a low small-signal impedance, roughly\n\n\\[\n\\sim \\frac{1}{g_{m2}}\n\\]\n\n(or \\(1/(g_{m2}+g_{mb2})\\) for MOS with body effect), because the upper device’s gate/base is AC-grounded. Thus the lower device’s drain/collector voltage changes only slightly:\n\n\\[\n\\frac{v_x}{v_i} \\approx -\\frac{g_{m1}}{g_{m2}},\n\\]\n\noften of order unity, rather than \\(-g_m R_L\\). Therefore\n\n\\[\nC_{\\text{in}} \\approx C\\left(1+\\frac{g_{m1}}{g_{m2}}\\right),\n\\]\n\nwhich is much smaller than in a simple common-source/common-emitter stage.\n\nMeanwhile, the large voltage gain appears at the **upper transistor’s drain/collector**, but the upper device’s own \\(C_{gd}\\) or \\(C_{\\mu}\\) is mostly returned to AC ground through its gate/base, so it loads the output rather than feeding back strongly to the input.\n\nSo the cascode acts as a kind of shield/current buffer: it keeps the input device’s collector/drain voltage nearly constant, greatly reducing Miller multiplication. It does not eliminate it entirely—finite device output resistance, imperfect AC grounding, and stray capacitance can still leave some Miller effect.",
        "format": "markdown",
        "sha256": "8aef03d57b4b6ecdad90d5fc8509a2113e68503cfeff47904526c94395273fb6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and shows that the gain across the input transistor’s Cgd is about −gm1/gm2, giving a Miller factor near 2 rather than the full-stage gain. The phrases “only slightly” and “nearly constant” overstate the effect, but the equations correctly show it is finite and roughly unity in magnitude.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 13168,
        "total_tokens": 13202,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 13168,
        "total_tokens": 13202,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12699,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is reduced in a cascode because the large output voltage swing is isolated from the input device’s feedback capacitance.\n\nFor a capacitance \\(C_f\\) between the input and output of an inverting stage,\n\n\\[\ni_{in}=sC_f(v_i-v_o)=sC_f(1-A_v)v_i\n\\]\n\nso the effective input capacitance is\n\n\\[\nC_{in}=C_f(1-A_v)\n\\]\n\nFor a common-source/common-emitter stage with large inverting gain \\(A_v\\approx -g_mR_L\\),\n\n\\[\nC_{in}\\approx C_f(1+g_mR_L)\n\\]\n\nwhich can be very large. This is the Miller multiplication.\n\nIn a cascode:\n\n- The lower transistor’s drain/collector is not the high-gain output node.\n- It is connected to the source/emitter of the upper common-gate/common-base transistor.\n- The upper transistor presents a low small-signal resistance, roughly \\(1/g_{m2}\\), at that intermediate node.\n- Therefore the voltage gain from the input to the lower transistor’s drain/collector is small:\n\n\\[\n\\frac{v_x}{v_i}\\approx -\\frac{g_{m1}}{g_{m2}}\n\\]\n\noften about \\(-1\\) for similar devices, instead of \\(-g_mR_L\\).\n\nSo the lower transistor’s \\(C_{gd}\\) or \\(C_{bc}\\) sees only about\n\n\\[\nC_{in}\\approx C_f\\left(1+\\frac{g_{m1}}{g_{m2}}\\right)\n\\]\n\nrather than \\(C_f(1+g_mR_L)\\). The Miller multiplication is therefore much smaller.\n\nMeanwhile, the large voltage swing occurs at the upper transistor’s drain/collector. But the upper transistor’s gate/base is AC-grounded, so its \\(C_{gd}\\) or \\(C_{bc}\\) is mostly just a capacitance from the output to ground, not a capacitance back to the input. Thus the high-gain output node is shielded from the input.\n\nSo, in short: a cascode keeps the input transistor’s collector/drain voltage nearly fixed and moves the large voltage gain to the upper device, preventing the input-to-output feedback capacitance from being multiplied by the full amplifier gain. This gives much better high-frequency response and reverse isolation.",
        "format": "markdown",
        "sha256": "cec26d7f4c0fabe3af2c88a0557878e78597c44e2275dd05a9b741dcbba806df"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the roughly −gm1/gm2 gain across the lower device’s feedback capacitance, giving about 1 + gm1/gm2 Miller multiplication rather than full-stage gain. Saying the drain is “nearly fixed” slightly overstates the reduction, but the answer’s equations make the correct, nonzero effect clear.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 6600,
        "total_tokens": 6634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6124,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 6600,
        "total_tokens": 6634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6124,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(V_{b1}\\) and \\(V_{b2}\\) are stiff DC bias sources and that both MOSFETs operate in saturation. The arrows identify the source terminals: \\(M_1\\) is a PMOS with its source at \\(V_{DD}\\), and \\(M_2\\) is an NMOS drawn sideways, with its source at \\(V_{in}\\), drain at \\(V_{out}\\), and gate at \\(V_{b1}\\).\n\nThus the circuit is a **common-gate NMOS stage with a PMOS current-source load**.\n\n---\n\n## 1. DC operation\n\nLet the quiescent input and output voltages be \\(V_{IN,Q}\\) and \\(V_{OUT,Q}\\). Define\n\n\\[\nV_{OV1}=V_{DD}-V_{b2}-|V_{TP1}|\n\\]\n\nfor \\(M_1\\), and\n\n\\[\nV_{OV2}=V_{b1}-V_{IN,Q}-V_{TN2}(V_{SB2})\n\\]\n\nfor \\(M_2\\). The body effect must generally be included in \\(V_{TN2}\\) if the NMOS body is tied to ground while \\(V_{IN,Q}>0\\).\n\nUsing a square-law model with channel-length modulation,\n\n\\[\nI_1 \\simeq \\frac{\\beta_1}{2}V_{OV1}^{\\,2}\n\\left[1+\\lambda_1(V_{DD}-V_{OUT,Q})\\right],\n\\]\n\n\\[\nI_2 \\simeq \\frac{\\beta_2}{2}V_{OV2}^{\\,2}\n\\left[1+\\lambda_2(V_{OUT,Q}-V_{IN,Q})\\right].\n\\]\n\nSince there is no DC load at the output,\n\n\\[\nI_1=I_2=I_Q.\n\\]\n\nBoth devices remain saturated when\n\n\\[\nV_{IN,Q}+V_{OV2}\\le V_{OUT,Q}\n\\le V_{DD}-V_{OV1}.\n\\]\n\nThe input source must sink the bias current \\(I_Q\\); unlike a common-source MOS input, this input terminal carries DC current.\n\nIf \\(\\lambda_1=\\lambda_2=0\\) and the two ideal current-source values are not exactly equal, the output is driven toward one rail until one device leaves saturation. In practice, finite output conductance fixes \\(V_{OUT,Q}\\).\n\n---\n\n## 2. Low-frequency voltage gain\n\nFor small signals, \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are AC grounds. Define\n\n\\[\ng_{o1}=\\frac{1}{r_{o1}},\\qquad\ng_{o2}=\\frac{1}{r_{o2}},\n\\]\n\nand the effective source-to-drain transconductance of \\(M_2\\),\n\n\\[\nG_m=g_{m2}+g_{mb2},\n\\]\n\nwhere \\(g_{mb2}\\) is the body-effect transconductance. If the body is tied to the source, \\(g_{mb2}=0\\).\n\nFor \\(M_2\\),\n\n\\[\nv_{gs2}=-v_{in},\\qquad\nv_{bs2}=-v_{in},\\qquad\nv_{ds2}=v_{out}-v_{in}.\n\\]\n\nHence the incremental drain current is\n\n\\[\ni_{d2}\n= -G_m v_{in}+g_{o2}(v_{out}-v_{in})\n= g_{o2}v_{out}-(G_m+g_{o2})v_{in}.\n\\]\n\nFor PMOS \\(M_1\\), its gate and source are both at AC ground, so \\(g_{m1}\\) does not contribute. It appears only as \\(r_{o1}\\) from the output to AC ground. Its incremental current delivered to the output is\n\n\\[\ni_{1}=-g_{o1}v_{out}.\n\\]\n\nOutput-node KCL gives\n\n\\[\n-g_{o1}v_{out}\n=\ng_{o2}v_{out}-(G_m+g_{o2})v_{in},\n\\]\n\nso\n\n\\[\n\\boxed{\n\\frac{v_{out}}{v_{in}}\n=\n\\frac{G_m+g_{o2}}{g_{o1}+g_{o2}}\n}\n\\]\n\nor, equivalently,\n\n\\[\n\\boxed{\nA_v=(g_{m2}+g_{mb2}+g_{o2})\n\\left(r_{o1}\\parallel r_{o2}\\right)\n}\n\\]\n\nand, since normally \\(g_{m2}+g_{mb2}\\gg g_{o2}\\),\n\n\\[\n\\boxed{\nA_v \\simeq\n(g_{m2}+g_{mb2})(r_{o1}\\parallel r_{o2})\n}.\n\\]\n\nWithout body effect,\n\n\\[\nA_v\\simeq g_{m2}(r_{o1}\\parallel r_{o2}).\n\\]\n\nIf \\(r_{o1}\\simeq r_{o2}=r_o\\), then \\(A_v\\simeq G_m r_o/2\\). If the PMOS load were an ideal current source, \\(r_{o1}\\to\\infty\\), giving \\(A_v\\simeq G_m r_{o2}\\).\n\nThe gain is **positive (non-inverting)**. Raising \\(V_{in}\\) reduces \\(V_{GS2}\\) and, through body effect, increases \\(V_{TN2}\\); therefore the NMOS current decreases. The PMOS load then charges the output node upward.\n\nWith an external load \\(R_L\\) to AC ground,\n\n\\[\nA_v=\n\\frac{G_m+g_{o2}}\n{g_{o1}+g_{o2}+1/R_L}\n\\simeq\nG_m(r_{o1}\\parallel r_{o2}\\parallel R_L).\n\\]\n\n---\n\n## 3. Input and output resistances\n\nWith the input voltage source set to zero, its terminal is AC-grounded. The controlled sources of \\(M_2\\) then vanish, giving\n\n\\[\n\\boxed{R_{out}=r_{o1}\\parallel r_{o2}}.\n\\]\n\nThe common-gate input resistance is low. If\n\n\\[\nR_D=r_{o1}\\parallel R_L\n\\]\n\nis the resistance from the drain to AC ground excluding \\(M_2\\), then\n\n\\[\n\\boxed{\nR_{in}=\n\\frac{r_{o2}+R_D}\n{1+(g_{m2}+g_{mb2})r_{o2}}\n}.\n\\]\n\nFor \\(g_mr_{o2}\\gg1\\) and \\(R_D\\ll r_{o2}\\),\n\n\\[\nR_{in}\\simeq \\frac{1}{g_{m2}+g_{mb2}},\n\\]\n\nthe usual common-gate result. If \\(R_D\\sim r_{o2}\\), the exact value can be closer to \\(2/(g_{m2}+g_{mb2})\\).\n\nFor a source with resistance \\(R_s\\),\n\n\\[\n\\frac{v_{out}}{v_s}\n=\nA_v\\frac{R_{in}}{R_s+R_{in}}.\n\\]\n\n---\n\n## 4. Main characteristics\n\n- **Topology:** common-gate NMOS amplifier with PMOS active load.\n- **Gain polarity:** non-inverting.\n- **Input impedance:** low; the input must also provide a DC current path.\n- **Output impedance:** high, approximately \\(r_{o1}\\parallel r_{o2}\\).\n- **Voltage gain:** set by \\(g_{m2}+g_{mb2}\\) times the output resistance.\n- **Body effect:** increases the effective transconductance and gain, while lowering input resistance.\n- **Output swing:** approximately bounded by\n  \\[\n  V_{in}+V_{OV2}\\lesssim V_{out}\\lesssim V_{DD}-V_{OV1}.\n  \\]\n- Because the gate of \\(M_2\\) is AC-grounded, there is little Miller multiplication, so the common-gate stage can have relatively wide bandwidth; the dominant pole is approximately\n  \\[\n  \\omega_p\\simeq\\frac{1}{(r_{o1}\\parallel r_{o2})C_{out}}.\n  \\]",
        "format": "markdown",
        "sha256": "222f40143bef97e93733489fd173b1a0399426e1c7cadf6cb08b9202c8d31f42"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places Vin at M2’s source, and gives the non-inverting gain and low input resistance. Its gain expression is equivalent to the required gm2(ro1 || ro2) approximation; the additional detail is consistent with the topology.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1030,
        "output_tokens": 27272,
        "total_tokens": 28302,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25641,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1030,
        "output_tokens": 27272,
        "total_tokens": 28302,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25641,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nAssuming \\(V_{DD},V_{b1},V_{b2}\\) are low-impedance DC sources and hence ac grounds:\n\n- \\(M_1\\) is a **PMOS current-source load**: source at \\(V_{DD}\\), gate at \\(V_{b2}\\), drain at \\(V_{\\text{out}}\\).\n- \\(M_2\\) is an **NMOS common-gate transistor**: gate at \\(V_{b1}\\), source at \\(V_{\\text{in}}\\), drain at \\(V_{\\text{out}}\\).\n\nSince both the gate and source of \\(M_1\\) are at ac ground, \\(g_{m1}\\) does not appear in the small-signal response; \\(M_1\\) contributes mainly its output resistance \\(r_{o1}\\).\n\nA positive increment in \\(V_{\\text{in}}\\) reduces \\(V_{GS2}\\), reducing the NMOS current. The PMOS current source then charges the output node, so \\(V_{\\text{out}}\\) rises. The stage is therefore **non-inverting**.\n\n---\n\n## 2. DC operation\n\nWith both devices saturated,\n\n\\[\nI_1 \\simeq \\frac{1}{2}k_p\n\\left(V_{DD}-V_{b2}-|V_{Tp}|\\right)^2\n\\left[1+\\lambda_1(V_{DD}-V_{\\text{out}})\\right],\n\\]\n\n\\[\nI_2 \\simeq \\frac{1}{2}k_n\n\\left(V_{b1}-V_{\\text{in}}-V_{Tn}\\right)^2\n\\left[1+\\lambda_2(V_{\\text{out}}-V_{\\text{in}})\\right],\n\\]\n\nwhere \\(V_{Tn}\\) may include body effect. With no load, the dc output is determined by\n\n\\[\nI_1=I_2.\n\\]\n\nThe saturation requirements are approximately\n\n\\[\nV_{\\text{out}}\\le V_{b2}+|V_{Tp}|\n\\qquad\\text{(PMOS saturated)},\n\\]\n\n\\[\nV_{\\text{out}}\\ge V_{b1}-V_{Tn}\n\\qquad\\text{(NMOS saturated)},\n\\]\n\nand \\(V_{\\text{in}}<V_{b1}-V_{Tn}\\) for \\(M_2\\) to be on.\n\nBecause two high-output-resistance current sources are in series, the dc output is sensitive to current mismatch. If \\(\\lambda_1=\\lambda_2=0\\) and there is no load, \\(V_{\\text{out}}\\) is not defined unless the two currents are exactly equal. In practice, channel-length modulation, a load, or feedback establishes the operating point.\n\n---\n\n## 3. Small-signal voltage gain\n\nDefine\n\n\\[\nG_2=g_{m2}+g_{mb2},\n\\]\n\nwhere \\(g_{mb2}\\) is included if the body of \\(M_2\\) is at a fixed ac potential. If the body is tied to the source, as in a three-terminal device, set \\(g_{mb2}=0\\).\n\nLet\n\n\\[\ng_{o1}=\\frac1{r_{o1}},\\qquad g_{o2}=\\frac1{r_{o2}},\n\\]\n\nand let\n\n\\[\nR_D=r_{o1}\\parallel R_L\n\\]\n\nbe the small-signal load from the output to ac ground; for no external load, \\(R_D=r_{o1}\\).\n\nFor \\(M_2\\),\n\n\\[\nv_{gs2}=v_{bs2}=-v_i,\\qquad v_{ds2}=v_o-v_i,\n\\]\n\nso the drain-to-source current is\n\n\\[\ni_{d2}=g_{o2}v_o-(G_2+g_{o2})v_i.\n\\]\n\nOutput-node KCL gives\n\n\\[\n\\frac{v_o}{R_D}+i_{d2}=0,\n\\]\n\nhence\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\n=\\frac{G_2+g_{o2}}{1/R_D+g_{o2}}\n=\\left(G_2+\\frac1{r_{o2}}\\right)(R_D\\parallel r_{o2})\n}\n\\]\n\nor, with no external load,\n\n\\[\n\\boxed{\nA_v=\\frac{G_2+g_{o2}}{g_{o1}+g_{o2}}.\n}\n\\]\n\nSince \\(G_2\\gg g_{o2}\\),\n\n\\[\n\\boxed{\nA_v\\simeq G_2(r_{o1}\\parallel r_{o2}\\parallel R_L).\n}\n\\]\n\nThus the gain is positive and can be quite large. If \\(r_{o1}=r_{o2}=r_o\\),\n\n\\[\nA_v=\\frac{1+G_2r_o}{2}\\simeq \\frac{G_2r_o}{2}.\n\\]\n\n---\n\n## 4. Input resistance\n\nThe current entering the source of \\(M_2\\) is\n\n\\[\ni_i=-i_{d2}=(G_2+g_{o2})v_i-g_{o2}v_o.\n\\]\n\nUsing the gain expression,\n\n\\[\n\\boxed{\nR_{\\text{in}}\n=\\frac{v_i}{i_i}\n=\\frac{r_{o2}+R_D}{1+G_2r_{o2}}.\n}\n\\]\n\nWith no external load,\n\n\\[\n\\boxed{\nR_{\\text{in}}\n=\\frac{r_{o1}+r_{o2}}{1+G_2r_{o2}}.\n}\n\\]\n\nFor \\(G_2r_{o2}\\gg1\\),\n\n\\[\nR_{\\text{in}}\\simeq\n\\frac{1}{G_2}\\left(1+\\frac{R_D}{r_{o2}}\\right).\n\\]\n\nConsequently:\n\n- If \\(r_{o2}\\gg R_D\\), the familiar result is\n  \\[\n  R_{\\text{in}}\\simeq \\frac{1}{g_{m2}+g_{mb2}},\n  \\]\n  or \\(1/g_{m2}\\) when body effect is absent.\n- If \\(r_{o1}\\approx r_{o2}\\), then \\(R_{\\text{in}}\\approx 2/G_2\\).\n\nThe low input resistance is characteristic of a common-gate/current-buffer stage.\n\n---\n\n## 5. Output resistance\n\nWith the input driven by an ideal voltage source, setting \\(v_i=0\\) makes all controlled sources in \\(M_2\\) zero. Looking into the output therefore gives\n\n\\[\n\\boxed{\nR_{\\text{out}}=r_{o1}\\parallel r_{o2}\n}\n\\]\n\nexcluding any external load.\n\nIf the input source has finite resistance \\(R_s\\), the output resistance of \\(M_2\\) is bootstrapped to\n\n\\[\nr_{o2}+R_s+G_2r_{o2}R_s,\n\\]\n\nso\n\n\\[\nR_{\\text{out}}\n=r_{o1}\\parallel\n\\left(r_{o2}+R_s+G_2r_{o2}R_s\\right).\n\\]\n\n---\n\n### Summary\n\nThis is a **complementary common-gate amplifier/current buffer**:\n\n- positive voltage gain;\n- high voltage gain set by \\(g_m\\) and the parallel output resistances;\n- low input resistance, approximately \\(1/(g_m+g_{mb})\\);\n- high output resistance;\n- no Miller multiplication of \\(C_{gd}\\), since the gate of \\(M_2\\) is ac-grounded, giving relatively wide bandwidth;\n- dc operation requires careful current matching or feedback because two current sources are connected in series.",
        "format": "markdown",
        "sha256": "aa0b3731929ac0b4f326527ad9d7464b5f37b061ddde7e2a6f06e95425b1bdc0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places Vin at M2’s source, identifies the bias voltages, and gives the non-inverting gain and low input resistance. Its gain expression is equivalent to the required approximation; the additional detail does not contradict the essential analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 960,
        "input_tokens": 1030,
        "output_tokens": 32529,
        "total_tokens": 33559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31014,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 960,
        "input_tokens": 1030,
        "output_tokens": 32529,
        "total_tokens": 33559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31014,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(V_{DD},V_{b1},V_{b2}\\) are ideal bias sources, hence ac grounds, and that both transistors operate in saturation.\n\n## 1. Circuit identification\n\n- \\(M_1\\) is a **PMOS current-source load**: source at \\(V_{DD}\\), gate at \\(V_{b2}\\), drain at \\(V_{\\text{out}}\\).\n- \\(M_2\\) is an **NMOS common-gate device**: source at \\(V_{\\text{in}}\\), gate at \\(V_{b1}\\), drain at \\(V_{\\text{out}}\\).\n\nThus the circuit is a non-inverting common-gate voltage amplifier with a high-impedance active load. The input source must sink the dc bias current of \\(M_2\\).\n\n---\n\n## 2. DC operation\n\nIgnoring channel-length modulation,\n\n\\[\nI_{D1}\\simeq \\frac{1}{2}\\mu_pC_{ox}\\left(\\frac WL\\right)_1\n\\left(V_{DD}-V_{b2}-|V_{TP}|\\right)^2 ,\n\\]\n\n\\[\nI_{D2}\\simeq \\frac{1}{2}\\mu_nC_{ox}\\left(\\frac WL\\right)_2\n\\left(V_{b1}-V_{\\text{in},Q}-V_{TN}\\right)^2 .\n\\]\n\nAt the quiescent point,\n\n\\[\nI_{D1}=I_{D2}=I_D.\n\\]\n\nIf the body of \\(M_2\\) is tied to a fixed substrate potential, \\(V_{TN}\\) includes body effect:\n\n\\[\nV_{TN}=V_{T0}+\\gamma\n\\left(\\sqrt{2\\phi_F+V_{SB,Q}}-\\sqrt{2\\phi_F}\\right).\n\\]\n\nWith finite channel-length modulation, the equation \\(I_{D1}(V_{\\text{out}})=I_{D2}(V_{\\text{in}},V_{\\text{out}})\\) determines \\(V_{\\text{out},Q}\\). If \\(\\lambda=0\\), the output dc level is indeterminate while both devices remain saturated; finite output conductance is needed for a stable small-signal gain.\n\n### Saturation/headroom limits\n\nFor \\(M_2\\),\n\n\\[\nV_{DS2}\\ge V_{GS2}-V_{TN}\n\\quad\\Rightarrow\\quad\nV_{\\text{out}}\\gtrsim V_{b1}-V_{TN}.\n\\]\n\nFor \\(M_1\\),\n\n\\[\nV_{SD1}\\ge V_{SG1}-|V_{TP}|\n\\quad\\Rightarrow\\quad\nV_{\\text{out}}\\lesssim V_{b2}+|V_{TP}|.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nV_{b1}-V_{TN}\\lesssim V_{\\text{out}}\\lesssim V_{b2}+|V_{TP}|\n}\n\\]\n\nis the approximate output range for which both devices remain saturated.\n\n---\n\n## 3. Small-signal voltage gain\n\nLet\n\n\\[\ng_{o1}=\\frac1{r_{o1}},\\qquad\ng_{o2}=\\frac1{r_{o2}},\n\\]\n\nand let \\(g_{m2}\\) and \\(g_{mb2}\\) be the gate and body transconductances of \\(M_2\\). If the body of \\(M_2\\) is tied to its source, take \\(g_{mb2}=0\\); if the body is fixed, body effect gives \\(g_{mb2}>0\\).\n\nFor \\(v_s=v_{\\text{in}}\\), \\(v_d=v_{\\text{out}}\\), and gate/body at ac ground,\n\n\\[\ni_{d2}\n=-(g_{m2}+g_{mb2})v_{\\text{in}}\n+g_{o2}(v_{\\text{out}}-v_{\\text{in}}).\n\\]\n\nDefine\n\n\\[\nG=g_{m2}+g_{mb2}+g_{o2}.\n\\]\n\nThen\n\n\\[\ni_{d2}=g_{o2}v_{\\text{out}}-Gv_{\\text{in}}.\n\\]\n\nThe PMOS load contributes an output conductance \\(g_{o1}\\) to ac ground. Output-node KCL gives\n\n\\[\n(g_{o1}+g_{o2})v_{\\text{out}}=Gv_{\\text{in}},\n\\]\n\nso\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n\\frac{g_{m2}+g_{mb2}+g_{o2}}\n{g_{o1}+g_{o2}}\n}\n\\]\n\nor equivalently,\n\n\\[\n\\boxed{\nA_v=\n\\left(g_{m2}+g_{mb2}+\\frac1{r_{o2}}\\right)\n\\left(r_{o1}\\parallel r_{o2}\\right)\n}.\n\\]\n\nSince normally \\(g_{m2}+g_{mb2}\\gg g_{o2}\\),\n\n\\[\n\\boxed{\nA_v\\approx\n(g_{m2}+g_{mb2})(r_{o1}\\parallel r_{o2})\n}\n\\]\n\nand, if body effect is absent,\n\n\\[\n\\boxed{\nA_v\\approx g_{m2}(r_{o1}\\parallel r_{o2}).\n}\n\\]\n\nThe gain is **positive**. Raising \\(V_{\\text{in}}\\) reduces \\(V_{GS2}\\) and, with a fixed body, increases its threshold through body effect; therefore \\(I_{D2}\\) decreases. The PMOS current source then raises \\(V_{\\text{out}}\\) until current balance is restored.\n\nAs \\(g_{o1}+g_{o2}\\rightarrow0\\), the calculated gain tends to infinity. Physically, with ideal current sources and no channel-length modulation, any current mismatch drives the output to a supply rail; finite output conductances are essential for linear operation.\n\n---\n\n## 4. Input and output resistances\n\n### Output resistance\n\nWith \\(v_{\\text{in}}=0\\), the source and gate of \\(M_2\\) are at ac ground, so\n\n\\[\n\\boxed{\nR_{\\text{out}}=r_{o1}\\parallel r_{o2}\n}\n\\]\n\nfor no external load.\n\n### Input resistance\n\nUsing the gain expression, the current entering the source of \\(M_2\\) is\n\n\\[\ni_{\\text{in}}\n=\n\\frac{g_{o1}(g_{m2}+g_{mb2}+g_{o2})}\n{g_{o1}+g_{o2}}\\,v_{\\text{in}}.\n\\]\n\nHence\n\n\\[\n\\boxed{\nR_{\\text{in}}\n=\n\\frac{g_{o1}+g_{o2}}\n{g_{o1}(g_{m2}+g_{mb2}+g_{o2})}\n=\n\\frac{r_{o1}+r_{o2}}\n{1+(g_{m2}+g_{mb2})r_{o2}}\n}.\n\\]\n\nUseful limits:\n\n- If \\(r_{o1}\\ll r_{o2}\\), the drain is relatively stiff and\n\n  \\[\n  R_{\\text{in}}\\approx \\frac{1}{g_{m2}+g_{mb2}},\n  \\]\n\n  the usual common-gate result.\n\n- If \\(r_{o1}\\approx r_{o2}=r_o\\) with \\(g_mr_o\\gg1\\),\n\n  \\[\n  R_{\\text{in}}\\approx \\frac{2}{g_{m2}+g_{mb2}}.\n  \\]\n\n- An ideal current-source load, \\(r_{o1}\\to\\infty\\), gives \\(R_{\\text{in}}\\to\\infty\\): the output can move enough to keep the drain current constant.\n\nFor an external load \\(R_L\\), define \\(R_D=r_{o1}\\parallel R_L\\). Then simply use\n\n\\[\nA_v=(g_m+g_{mb}+g_{o2})(R_D\\parallel r_{o2}),\n\\qquad\nR_{\\text{out}}=R_D\\parallel r_{o2},\n\\]\n\n\\[\nR_{\\text{in}}=\\frac{r_{o2}+R_D}\n{1+(g_m+g_{mb})r_{o2}}.\n\\]\n\n---\n\n## 5. Frequency behavior\n\nBecause the gates are at ac ground, \\(C_{gd}\\) is not Miller-multiplied, so this common-gate stage can have relatively wide bandwidth. The principal output pole is approximately\n\n\\[\n\\omega_{p,o}\\approx\n\\frac{g_{o1}+g_{o2}}{C_o}\n=\n\\frac{1}{(r_{o1}\\parallel r_{o2})C_o},\n\\]\n\nwhere \\(C_o\\) includes drain/body capacitances, \\(C_{gd}\\) to the ac-grounded gates, and any external load capacitance.\n\nIn summary, the circuit is a **positive-gain common-gate amplifier** with gain of order intrinsic gain, \\(R_{\\text{out}}\\approx r_{o1}\\parallel r_{o2}\\), and an input resistance set mainly by \\(g_m+g_{mb}\\) when the drain load is not extremely high.",
        "format": "markdown",
        "sha256": "941eb314777a685d1a600adbd3803f7ba035bbc3cf4e4ebbedce85262751c56b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places Vin at M2’s source, and gives the positive gain and low input resistance. Its gain expression is equivalent to the golden expression; the additional detail does not contradict the essential analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 960,
        "input_tokens": 1030,
        "output_tokens": 31448,
        "total_tokens": 32478,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29627,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 960,
        "input_tokens": 1030,
        "output_tokens": 31448,
        "total_tokens": 32478,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29627,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The circuit has 2 poles.**\n\nFor small-signal pole counting, the dc bias/supply terminals of \\(M_2\\) are ac grounds. Hence\n\n\\[\nC_{GD2},\\quad C_{DB2},\\quad C_{DB}\n\\]\n\nare all effectively connected from the output node to ground and can be combined. Any \\(C_{GS2}\\) of \\(M_2\\) is also irrelevant because both its terminals are at ac ground.\n\nThus only two independent dynamic nodes remain:\n\n1. the gate node of \\(M_1\\), with \\(C_{GS}\\) to ground,\n2. the output node, with the combined output capacitance to ground,\n\nwhile \\(C_{GD}\\) bridges these two nodes. The resulting characteristic equation is quadratic:\n\n\\[\nD(s)=a_0+a_1s+a_2s^2,\n\\]\n\nso there are **two poles**. The feedforward path through \\(C_{GD}\\) additionally produces a zero, but not another pole.\n\nIf all transistor output resistances are neglected, one of the two poles may lie at \\(s=0\\); with finite \\(r_o\\), both are finite.",
        "format": "markdown",
        "sha256": "1c44bc39e35465e48322ac913296cb5a02e65cfbe2d3c784d64178ae20108833"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent dynamic nodes—the M1 gate and output—and assigns the capacitances to the appropriate nodes, with CGD coupling them. The extra note about a pole at zero when output resistance is neglected is consistent with that limiting case.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1505,
        "output_tokens": 13049,
        "total_tokens": 14554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12813,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1505,
        "output_tokens": 13049,
        "total_tokens": 14554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12813,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The circuit has 2 poles** (assuming the finite \\(R_S\\) shown).\n\nWhen the dc bias/source supplies are set to ac ground, the only independent dynamic node voltages are:\n\n- \\(v_x\\): gate of \\(M_1\\)\n- \\(v_o\\): the common output/drain node\n\nLet\n\n\\[\nC_o=C_{DB}+C_{GD2}+C_{DB2}.\n\\]\n\nThen \\(C_{GS}\\) is from \\(v_x\\) to ground, \\(C_{GD}\\) is between \\(v_x\\) and \\(v_o\\), and \\(C_o\\) is from \\(v_o\\) to ground. The capacitance matrix is\n\n\\[\n\\mathbf C=\n\\begin{bmatrix}\nC_{GS}+C_{GD} & -C_{GD}\\\\\n-C_{GD} & C_o+C_{GD}\n\\end{bmatrix},\n\\]\n\nwhich has rank 2. Hence \\(\\det(\\mathbf G+s\\mathbf C)\\) is quadratic in \\(s\\), giving two poles. The five physical capacitors do not give five poles because several capacitor voltages are not independent; the three output-shunt capacitors simply combine in parallel. \\(C_{GD}\\) can introduce a zero, but not an additional pole.\n\nIf the transistor output resistances are idealized as infinite, one of the two poles may be at \\(s=0\\), but the count remains two.",
        "format": "markdown",
        "sha256": "998fd257969b6ac5a408a7bd34de898f0dc4324cb5a3441983967823ffde3acb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent dynamic nodes and assigns the capacitances to them, so the circuit has two poles. The idealized-output-resistance caveat does not undermine the answer.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1505,
        "output_tokens": 17449,
        "total_tokens": 18954,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17179,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1505,
        "output_tokens": 17449,
        "total_tokens": 18954,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17179,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Two poles** (assuming finite \\(R_S\\) and the usual finite output resistance).\n\nFor small signals, the bias/supply terminals are AC grounds, so\n\n\\[\nC_{DB},\\quad C_{GD2},\\quad C_{DB2}\n\\]\n\nare all effectively from the output node to ground and can be combined into one capacitance \\(C_o\\). The only independent energy-storing node voltages are:\n\n1. the gate node of \\(M_1\\),\n2. the common drain/output node.\n\nThe capacitance matrix is\n\n\\[\n\\mathbf C=\n\\begin{bmatrix}\nC_{GS}+C_{GD} & -C_{GD}\\\\\n-C_{GD} & C_o+C_{GD}\n\\end{bmatrix},\n\\]\n\nwhich has rank 2, so the characteristic equation is quadratic. Thus \\(V_{\\text{out}}/V_{\\text{in}}\\) has **two poles**. The bridging capacitor \\(C_{GD}\\) also introduces a feedforward zero, but not an additional pole.\n\nIf \\(R_S=0\\) — an ideal voltage source directly driving the gate — the input pole disappears and only one finite pole remains.",
        "format": "markdown",
        "sha256": "5de2364c9d03c8140e25b4c4bc0656bb62a8ec3f349bf4d923f125d0b4b49469"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent nodes, assigns the capacitances to the right nodes, and explains that the bridging CGD adds a zero rather than another pole. The RS=0 caveat is a valid boundary case and does not alter the answer for the shown circuit.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1505,
        "output_tokens": 16301,
        "total_tokens": 17806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16074,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1505,
        "output_tokens": 16301,
        "total_tokens": 17806,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16074,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(V_X\\) be the node between \\(M_1\\) and \\(M_2\\). Assume enhancement-mode NMOS devices, a high-impedance output load, and initially the long-channel square-law model with \\(\\lambda=\\gamma=0\\). Define\n\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}\\left(\\frac WL\\right)_i,\\qquad\nV_{OV}=V_{\\mathrm{in}}-V_T .\n\\]\n\nThen\n\n\\[\nV_{GS1}=V_{\\mathrm{in}},\\quad V_{DS1}=V_X,\n\\]\n\\[\nV_{GS2}=V_{\\mathrm{in}}-V_X,\\quad V_{DS2}=V_{\\mathrm{out}}-V_X.\n\\]\n\n## 1. Regions of operation\n\nFor \\(M_1\\) to be saturated, \\(V_X\\ge V_{OV}\\). But for \\(M_2\\) to conduct,\n\n\\[\nV_{\\mathrm{in}}-V_X>V_T \\quad\\Rightarrow\\quad V_X<V_{OV}.\n\\]\n\nThus, when current flows, \\(M_1\\) is necessarily in triode. \\(M_2\\) is saturated if\n\n\\[\nV_{\\mathrm{out}}-V_X\\ge V_{\\mathrm{in}}-V_X-V_T\n\\]\n\nor\n\n\\[\n\\boxed{V_{\\mathrm{out}}\\ge V_{OV}} .\n\\]\n\nFor \\(V_{\\mathrm{out}}<V_{OV}\\), both devices are in triode. This is a self-cascode or split-length transistor, not a conventional cascode, because the gate of \\(M_2\\) is also driven by \\(V_{\\mathrm{in}}\\).\n\n---\n\n## 2. DC current and equivalent transistor\n\nFor \\(M_2\\) saturated,\n\n\\[\nI_D=\\frac{\\beta_2}{2}(V_{OV}-V_X)^2 .\n\\]\n\nFor \\(M_1\\) in triode,\n\n\\[\nI_D=\\beta_1\\left(V_{OV}V_X-\\frac{V_X^2}{2}\\right)\n    =\\frac{\\beta_1}{2}\\left[V_{OV}^2-(V_{OV}-V_X)^2\\right].\n\\]\n\nEquating these gives\n\n\\[\nV_{OV}-V_X\n =V_{OV}\\sqrt{\\frac{\\beta_1}{\\beta_1+\\beta_2}},\n\\]\n\n\\[\nV_X=V_{OV}\\left(1-\\sqrt{\\frac{\\beta_1}{\\beta_1+\\beta_2}}\\right),\n\\]\n\nand\n\n\\[\n\\boxed{I_D=\\frac{\\beta_{\\mathrm{eq}}}{2}V_{OV}^2},\n\\qquad\n\\boxed{\\beta_{\\mathrm{eq}}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}} .\n\\]\n\nThus the two transistors behave exactly like one transistor with\n\n\\[\n\\frac{1}{\\beta_{\\mathrm{eq}}}\n=\\frac{1}{\\beta_1}+\\frac{1}{\\beta_2}.\n\\]\n\nIf they have the same width, this is equivalent to a single transistor of length \\(L_1+L_2\\).\n\nFor identical devices, \\(\\beta_1=\\beta_2=\\beta\\):\n\n\\[\n\\boxed{V_X=\\left(1-\\frac{1}{\\sqrt2}\\right)V_{OV}\\approx0.293V_{OV}},\n\\]\n\n\\[\n\\boxed{I_D=\\frac{\\beta}{4}(V_{\\mathrm{in}}-V_T)^2}.\n\\]\n\nHere \\(M_2\\)'s overdrive is \\(V_{OV}/\\sqrt2\\), while \\(M_1\\) remains in triode.\n\n### Complete composite \\(I\\)-\\(V\\) characteristic\n\nFor \\(\\gamma=\\lambda=0\\), the stack is equivalent to one NMOS transistor:\n\n\\[\nI_D=\n\\begin{cases}\n0, & V_{\\mathrm{in}}\\le V_T,\\\\[4pt]\n\\beta_{\\mathrm{eq}}\\left[\nV_{OV}V_{\\mathrm{out}}-\\dfrac{V_{\\mathrm{out}}^2}{2}\n\\right], & 0<V_{\\mathrm{out}}<V_{OV},\\\\[8pt]\n\\dfrac{\\beta_{\\mathrm{eq}}}{2}V_{OV}^2,\n& V_{\\mathrm{out}}\\ge V_{OV}.\n\\end{cases}\n\\]\n\n---\n\n## 3. DC transfer characteristic with \\(R_D\\)\n\nThe resistor imposes the load line\n\n\\[\n\\boxed{\\frac{V_{DD}-V_{\\mathrm{out}}}{R_D}=I_D}.\n\\]\n\n### Off region\n\n\\[\nV_{\\mathrm{in}}\\le V_T:\\qquad I_D=0,\\quad V_{\\mathrm{out}}=V_{DD}.\n\\]\n\n### Composite transistor saturated\n\nFor \\(V_{\\mathrm{out}}\\ge V_{OV}\\),\n\n\\[\n\\boxed{\nV_{\\mathrm{out}}\n=V_{DD}-\\frac{R_D\\beta_{\\mathrm{eq}}}{2}\n(V_{\\mathrm{in}}-V_T)^2\n}.\n\\]\n\nFor identical transistors,\n\n\\[\nV_{\\mathrm{out}}\n=V_{DD}-\\frac{R_D\\beta}{4}\n(V_{\\mathrm{in}}-V_T)^2 .\n\\]\n\nThe boundary between saturation and triode occurs at \\(V_{\\mathrm{out}}=V_{OV}=x\\), where\n\n\\[\n\\frac{R_D\\beta_{\\mathrm{eq}}}{2}x^2+x-V_{DD}=0,\n\\]\n\nso\n\n\\[\n\\boxed{\nx=\n\\frac{\\sqrt{1+2\\beta_{\\mathrm{eq}}R_DV_{DD}}-1}\n{\\beta_{\\mathrm{eq}}R_D}\n=\n\\frac{2V_{DD}}\n{1+\\sqrt{1+2\\beta_{\\mathrm{eq}}R_DV_{DD}}}\n}.\n\\]\n\nThus the high-gain saturation region is approximately\n\n\\[\nV_T<V_{\\mathrm{in}}<V_T+x.\n\\]\n\n### Both devices in triode\n\nFor larger \\(V_{\\mathrm{in}}\\),\n\n\\[\n\\boxed{\n\\frac{V_{DD}-V_{\\mathrm{out}}}{R_D}\n=\n\\beta_{\\mathrm{eq}}\n\\left[\nV_{OV}V_{\\mathrm{out}}-\\frac{V_{\\mathrm{out}}^2}{2}\n\\right]\n}.\n\\]\n\nAs \\(V_{\\mathrm{in}}\\) becomes large, \\(V_{\\mathrm{out}}\\to0\\), limited by the on-resistance of the two-transistor stack.\n\n---\n\n## 4. Small-signal gain\n\nIn the saturation region, the effective transconductance of the composite device is\n\n\\[\n\\boxed{\ng_{m,\\mathrm{eq}}\n=\\frac{\\partial I_D}{\\partial V_{\\mathrm{in}}}\n=\\beta_{\\mathrm{eq}}V_{OV}\n=\\sqrt{2\\beta_{\\mathrm{eq}}I_D}\n}.\n\\]\n\nFor identical devices,\n\n\\[\n\\boxed{g_{m,\\mathrm{eq}}=\\frac{\\beta}{2}(V_{\\mathrm{in}}-V_T)}.\n\\]\n\nWith \\(V_{DD}\\) as AC ground and neglecting all output conductance,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}\n=-g_{m,\\mathrm{eq}}R_D\n=-\\beta_{\\mathrm{eq}}V_{OV}R_D\n}.\n\\]\n\nFor identical devices,\n\n\\[\n\\boxed{\nA_v=-\\frac{\\beta R_D}{2}(V_{\\mathrm{in}}-V_T)\n}.\n\\]\n\nIn the triode region,\n\n\\[\ng_m=\\beta_{\\mathrm{eq}}V_{\\mathrm{out}},\\qquad\ng_{ds}=\\beta_{\\mathrm{eq}}(V_{OV}-V_{\\mathrm{out}}),\n\\]\n\nand therefore\n\n\\[\nA_v=\n-\\frac{\\beta_{\\mathrm{eq}}V_{\\mathrm{out}}}\n{1/R_D+\\beta_{\\mathrm{eq}}(V_{OV}-V_{\\mathrm{out}})}.\n\\]\n\nThe low-frequency input current is essentially zero, so the input resistance is very large. With \\(\\lambda=0\\), the output resistance in the saturation region is simply \\(R_D\\).\n\n---\n\n## 5. Body effect and channel-length modulation\n\nIn a standard common-substrate CMOS process, the body of \\(M_2\\) is grounded while its source is at \\(V_X>0\\). Hence\n\n\\[\nV_{T2}=V_{T0}+\\Delta V_T(V_X),\n\\]\n\n\\[\n\\Delta V_T=\\gamma\\left[\n\\sqrt{2\\phi_F+V_X}-\\sqrt{2\\phi_F}\n\\right].\n\\]\n\nThe DC node voltage must then be found from\n\n\\[\n\\boxed{\n\\beta_1\\left(V_{OV}V_X-\\frac{V_X^2}{2}\\right)\n=\n\\frac{\\beta_2}{2}\n\\left[V_{OV}-V_X-\\Delta V_T(V_X)\\right]^2\n}.\n\\]\n\nBody effect reduces the current and effective transconductance, and the exact equivalence to a single transistor of length \\(L_1+L_2\\) no longer holds. The saturation boundary becomes\n\n\\[\nV_{\\mathrm{out}}\\ge V_{\\mathrm{in}}-V_{T2}(V_X).\n\\]\n\nIf each body can be tied to its own source, or if \\(\\gamma=0\\), this effect disappears.\n\nIncluding channel-length modulation, the stack has an enhanced output resistance because \\(M_2\\) provides local source feedback. Approximately,\n\n\\[\nr_{o,\\mathrm{eff}}\n\\simeq\nr_{o2}\\left[\n1+\\frac{g_{m2}+g_{mb2}}{g_{d1}}\n\\right],\n\\]\n\nwhere \\(g_{d1}\\) is the small-signal drain conductance of triode-region \\(M_1\\). With no body effect,\n\n\\[\ng_{d1}=\\beta_1(V_{OV}-V_X),\\qquad\ng_{m2}=\\beta_2(V_{OV}-V_X),\n\\]\n\nso\n\n\\[\nr_{o,\\mathrm{eff}}\\simeq r_{o2}\n\\left(1+\\frac{\\beta_2}{\\beta_1}\\right).\n\\]\n\nFor identical devices this is about \\(2r_{o2}\\); making \\(\\beta_2\\gg\\beta_1\\) can produce a much larger self-cascode output resistance. The gain then becomes\n\n\\[\nA_v\\simeq -g_{m,\\mathrm{eq}}\n\\left(R_D\\parallel r_{o,\\mathrm{eff}}\\right).\n\\]\n\nThe central result is that, ideally, the circuit is simply a resistor-loaded common-source stage using a composite transistor of effective length \\(L_1+L_2\\): \\(M_1\\) is in triode, \\(M_2\\) is saturated over the useful high-gain range, and both gates being tied to the input prevents this from behaving as a conventional cascode.",
        "format": "markdown",
        "sha256": "f004113b83c3b89338a7eceb649425d102533a58a8069db412fb9bf670093470"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS structure, with M1 in triode and M2 saturated, and derives the composite device whose effective length is L1+L2 for equal widths. Its identical-device output-resistance estimate also agrees with the golden solution.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1171,
        "output_tokens": 32900,
        "total_tokens": 34071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30788,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1171,
        "output_tokens": 32900,
        "total_tokens": 34071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30788,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(V_X\\) be the node joining the drain of \\(M_1\\) to the source of \\(M_2\\), and let\n\n\\[\nA \\equiv V_{in}-V_{TN},\\qquad v\\equiv V_{out}.\n\\]\n\nAssume initially that the two devices are identical NMOS transistors with\n\n\\[\nk=\\mu_n C_{ox}\\frac WL,\\qquad\nI_{D,\\text{sat}}=\\frac{k}{2}V_{OV}^2,\n\\]\n\nand neglect body effect and channel-length modulation.\n\n## 1. Operating regions\n\nThe terminal voltages are\n\n\\[\n\\begin{aligned}\nM_1:&\\quad V_{GS1}=V_{in},\\quad V_{DS1}=V_X,\\\\\nM_2:&\\quad V_{GS2}=V_{in}-V_X,\\quad V_{DS2}=v-V_X.\n\\end{aligned}\n\\]\n\nFor \\(M_2\\) to conduct,\n\n\\[\nV_{in}-V_X>V_{TN}\n\\quad\\Longrightarrow\\quad\nV_X<A.\n\\]\n\nBut \\(M_1\\) would need \\(V_{DS1}=V_X\\ge A\\) to be saturated. Therefore:\n\n\\[\n\\boxed{M_1\\text{ is always in triode whenever the stack conducts.}}\n\\]\n\nThe upper transistor is saturated when\n\n\\[\nv-V_X\\ge (V_{in}-V_X)-V_{TN}\n\\quad\\Longleftrightarrow\\quad\n\\boxed{v\\ge A=V_{in}-V_{TN}}.\n\\]\n\nThus:\n\n- \\(V_{in}\\le V_{TN}\\): both off, \\(V_{out}=V_{DD}\\).\n- \\(V_{out}\\ge V_{in}-V_{TN}\\): \\(M_1\\) triode, \\(M_2\\) saturated.\n- \\(V_{out}<V_{in}-V_{TN}\\): both \\(M_1\\) and \\(M_2\\) are in triode.\n\nThis is not a conventional cascode because the gate of \\(M_2\\) follows \\(V_{in}\\).\n\n---\n\n## 2. Current when \\(M_2\\) is saturated\n\nFor identical devices,\n\n\\[\nI_D=k\\left(AV_X-\\frac{V_X^2}{2}\\right)\n     =\\frac{k}{2}\\left[A^2-(A-V_X)^2\\right]\n\\]\n\nfrom \\(M_1\\), while from saturated \\(M_2\\),\n\n\\[\nI_D=\\frac{k}{2}(A-V_X)^2.\n\\]\n\nEquating them gives\n\n\\[\nA-V_X=\\frac{A}{\\sqrt 2},\n\\]\n\nso\n\n\\[\n\\boxed{V_X=\\left(1-\\frac{1}{\\sqrt2}\\right)A}\n\\]\n\nand\n\n\\[\n\\boxed{I_D=\\frac{k}{4}(V_{in}-V_{TN})^2}.\n\\]\n\nTherefore the output is\n\n\\[\n\\boxed{\nV_{out}=V_{DD}-\\frac{kR_D}{4}(V_{in}-V_{TN})^2\n}\n\\]\n\nas long as \\(V_{out}\\ge V_{in}-V_{TN}\\).\n\nFor unequal devices, with \\(k_1,k_2\\), define\n\n\\[\nk_e=\\frac{k_1k_2}{k_1+k_2}.\n\\]\n\nThen\n\n\\[\nI_D=\\frac{k_e}{2}(V_{in}-V_{TN})^2.\n\\]\n\n---\n\n## 3. Equivalent-transistor interpretation\n\nWhen both devices are in triode, summing their voltage drops gives\n\n\\[\nI_D=k_e\\left[(V_{in}-V_{TN})V_{out}-\\frac{V_{out}^2}{2}\\right].\n\\]\n\nHence, under the stated assumptions, the stack is equivalent to one NMOS transistor having\n\n\\[\n\\boxed{k_{\\text{eff}}=\\frac{k_1k_2}{k_1+k_2}}.\n\\]\n\nFor identical devices,\n\n\\[\n\\boxed{k_{\\text{eff}}=\\frac{k}{2}},\n\\]\n\ni.e. the stack behaves like a transistor with twice the channel length. It has half the current drive and approximately half the transconductance of a single device.\n\n---\n\n## 4. Complete DC transfer characteristic\n\nLet \\(K=k_{\\text{eff}}R_D\\).\n\n### Saturated upper device\n\n\\[\nV_{out}=V_{DD}-\\frac{K}{2}A^2,\n\\qquad V_{out}\\ge A.\n\\]\n\nThe boundary occurs when \\(V_{out}=A\\):\n\n\\[\nV_{DD}-A_b=\\frac{K}{2}A_b^2,\n\\]\n\nor\n\n\\[\n\\boxed{\nA_b=\\frac{\\sqrt{1+2KV_{DD}}-1}{K}\n},\n\\qquad V_{in,b}=V_{TN}+A_b.\n\\]\n\n### Both devices in triode\n\nUsing\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}\n=k_{\\text{eff}}\\left(AV_{out}-\\frac{V_{out}^2}{2}\\right),\n\\]\n\nthe physical root is\n\n\\[\n\\boxed{\nV_{out}\n=A+\\frac1K\n-\\sqrt{\\left(A+\\frac1K\\right)^2-\\frac{2V_{DD}}{K}}\n}\n\\]\n\nfor \\(A>A_b\\).\n\nDigitally, the circuit is therefore a resistive-load inverter with a relatively weak pull-down network.\n\n---\n\n## 5. Small-signal voltage gain\n\nWith \\(M_2\\) saturated and \\(\\lambda=0\\),\n\n\\[\ng_{m,\\text{eff}}\n=\\frac{\\partial I_D}{\\partial V_{in}}\n=k_{\\text{eff}}A.\n\\]\n\nFor identical devices,\n\n\\[\ng_{m,\\text{eff}}=\\frac{k}{2}(V_{in}-V_{TN}).\n\\]\n\nSince \\(V_{DD}\\) is AC ground,\n\n\\[\n\\boxed{\nA_v\\equiv\\frac{v_{out}}{v_{in}}\n=-g_{m,\\text{eff}}R_D\n=-\\frac{kR_D}{2}(V_{in}-V_{TN})\n}.\n\\]\n\nThis is half the gain of a resistively loaded common-source stage using one of the original transistors.\n\nIn the triode region,\n\n\\[\ng_{m,\\text{eff}}=k_{\\text{eff}}V_{out},\\qquad\ng_{d,\\text{eff}}=k_{\\text{eff}}(A-V_{out}),\n\\]\n\nso\n\n\\[\n\\boxed{\nA_v=\n-\\frac{k_{\\text{eff}}V_{out}}\n{1/R_D+k_{\\text{eff}}(A-V_{out})}\n}.\n\\]\n\nWith finite channel-length modulation, replace \\(R_D\\) by \\(R_D\\parallel r_{o,\\text{stack}}\\); the upper device gives a cascode-like increase in output resistance.\n\n---\n\n## Body-effect caveat\n\nIf the body of \\(M_2\\) is tied to ground rather than to its source,\n\n\\[\nV_{T2}=V_{T0}+\\gamma\\left[\n\\sqrt{2\\phi_F+V_X}-\\sqrt{2\\phi_F}\n\\right].\n\\]\n\nThen \\(M_2\\) has a larger threshold, its current and transconductance are lower, and the exact \\(k_{\\text{eff}}=k/2\\) equivalence no longer holds. \\(M_1\\) nevertheless remains in triode. The DC solution must then be found from\n\n\\[\n\\frac{k_1}{2}\\left[A^2-(A-V_X)^2\\right]\n=\n\\frac{k_2}{2}\n\\left[V_{in}-V_X-V_{T2}(V_X)\\right]^2,\n\\]\n\nwith \\(M_2\\) saturated for\n\n\\[\nV_{out}\\ge V_{in}-V_{T2}(V_X).\n\\]",
        "format": "markdown",
        "sha256": "b1ceb745b42eac0b41b2b82d27155ba38e101a21e8203823634865461c0e6f91"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS stack, with M1 in triode and M2 saturated in the normal operating region, and derives the effective-device result. For identical devices, k_eff = k/2, equivalent to twice the channel length; the extra transfer and gain analysis is largely consistent.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1088,
        "input_tokens": 1171,
        "output_tokens": 25757,
        "total_tokens": 26928,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1088,
        "input_tokens": 1171,
        "output_tokens": 25757,
        "total_tokens": 26928,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Operating regions\n\nLet \\(V_X\\) be the node between the drain of \\(M_1\\) and the source of \\(M_2\\), and define\n\n\\[\nV \\equiv V_{in}-V_{T},\\qquad V_o\\equiv V_{out},\n\\]\n\nassuming initially that the two NMOS devices have the same \\(V_T\\), obey the square-law model, and that body effect and channel-length modulation are neglected. Let\n\n\\[\n\\beta_i=\\mu_n C_{\\rm ox}\\left(\\frac WL\\right)_i .\n\\]\n\nFor \\(V_{in}\\le V_T\\), both devices are off and\n\n\\[\nV_o=V_{DD}.\n\\]\n\nFor \\(V>0\\), \\(M_2\\) can conduct only if\n\n\\[\nV_{GS2}-V_T=V_{in}-V_X-V_T=V-V_X>0\n\\quad\\Rightarrow\\quad V_X<V .\n\\]\n\nBut saturation of \\(M_1\\) would require\n\n\\[\nV_{DS1}=V_X\\ge V_{GS1}-V_T=V .\n\\]\n\nThese conditions are contradictory. Therefore:\n\n\\[\n\\boxed{\\text{Whenever current flows, }M_1\\text{ is in triode.}}\n\\]\n\nFor \\(M_2\\),\n\n\\[\nV_{DS2}=V_o-V_X,\\qquad V_{GS2}-V_T=V-V_X,\n\\]\n\nso \\(M_2\\) is saturated when\n\n\\[\nV_o-V_X\\ge V-V_X\n\\quad\\Rightarrow\\quad\n\\boxed{V_o\\ge V=V_{in}-V_T}.\n\\]\n\nFor \\(V_o<V\\), both devices are in triode. Thus this is a self-cascode or split-length composite NMOS.\n\n---\n\n## 2. Equivalent composite transistor\n\nDefine\n\n\\[\nu\\equiv V-V_X=V_{GS2}-V_T .\n\\]\n\nSince \\(M_1\\) is in triode,\n\n\\[\nI_1=\\beta_1\\left(VV_X-\\frac{V_X^2}{2}\\right)\n    =\\frac{\\beta_1}{2}\\left(V^2-u^2\\right).\n\\]\n\n### \\(M_2\\) saturated\n\n\\[\nI_2=\\frac{\\beta_2}{2}u^2.\n\\]\n\nEquating \\(I_1=I_2\\),\n\n\\[\nu^2=\\frac{\\beta_1}{\\beta_1+\\beta_2}V^2,\n\\]\n\nand\n\n\\[\nI_D=\\frac{\\beta_{\\rm eq}}{2}V^2,\n\\qquad\n\\boxed{\\beta_{\\rm eq}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}}.\n\\]\n\nFor identical devices, \\(\\beta_1=\\beta_2=\\beta\\),\n\n\\[\n\\beta_{\\rm eq}=\\frac{\\beta}{2},\n\\]\n\n\\[\nu=\\frac{V}{\\sqrt2},\\qquad\nV_X=\\left(1-\\frac1{\\sqrt2}\\right)V,\n\\]\n\nand\n\n\\[\n\\boxed{I_D=\\frac{\\beta}{4}(V_{in}-V_T)^2}.\n\\]\n\n### \\(M_2\\) in triode\n\nLet\n\n\\[\nw\\equiv V-V_o>0.\n\\]\n\nThen \\(V_{DS2}=u-w\\), and\n\n\\[\nI_2=\\frac{\\beta_2}{2}\\left(u^2-w^2\\right).\n\\]\n\nEquating currents gives\n\n\\[\nI_D=\\frac{\\beta_{\\rm eq}}{2}(V^2-w^2)\n    =\\beta_{\\rm eq}\\left(VV_o-\\frac{V_o^2}{2}\\right).\n\\]\n\nConsequently, under the ideal assumptions, the two-transistor stack is exactly equivalent to one NMOS transistor with\n\n\\[\n\\boxed{V_{T,\\rm eq}=V_T,\\qquad\n\\beta_{\\rm eq}=\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}}\n\\]\n\nand source at ground, gate at \\(V_{in}\\), and drain at \\(V_{out}\\). For \\(N\\) identical series devices with tied gates, \\(\\beta_{\\rm eq}=\\beta/N\\).\n\nIts \\(I-V\\) characteristic is therefore\n\n\\[\nI_D=\n\\begin{cases}\n0, & V_{in}\\le V_T,\\\\[2mm]\n\\dfrac{\\beta_{\\rm eq}}{2}(V_{in}-V_T)^2,\n& V_o\\ge V_{in}-V_T \\quad\\text{(saturation)},\\\\[3mm]\n\\beta_{\\rm eq}\\left[(V_{in}-V_T)V_o-\\dfrac{V_o^2}{2}\\right],\n& V_o<V_{in}-V_T \\quad\\text{(triode)}.\n\\end{cases}\n\\]\n\n---\n\n## 3. DC voltage-transfer characteristic\n\nThe resistor current is\n\n\\[\nI_D=\\frac{V_{DD}-V_o}{R_D}.\n\\]\n\nLet \\(k=R_D\\beta_{\\rm eq}\\).\n\n### Saturation region\n\n\\[\n\\boxed{\nV_o=V_{DD}-\\frac{k}{2}(V_{in}-V_T)^2\n}\n\\]\n\nas long as \\(V_o\\ge V_{in}-V_T\\).\n\nThe boundary between saturation and triode occurs when \\(V_o=V\\equiv V_B\\):\n\n\\[\n\\frac{k}{2}V_B^2+V_B-V_{DD}=0,\n\\]\n\nhence\n\n\\[\n\\boxed{\nV_B=\n\\frac{\\sqrt{1+2kV_{DD}}-1}{k}\n=\n\\frac{2V_{DD}}{1+\\sqrt{1+2kV_{DD}}}\n}\n\\]\n\nand\n\n\\[\n\\boxed{V_{in,B}=V_T+V_B,\\qquad V_{out,B}=V_B.}\n\\]\n\nFor identical devices, \\(k=R_D\\beta/2\\), so\n\n\\[\nV_B=\\frac{2V_{DD}}{1+\\sqrt{1+\\beta R_DV_{DD}}}.\n\\]\n\n### Triode region\n\nFor \\(V_{in}>V_{in,B}\\),\n\n\\[\n\\boxed{\n\\frac{V_{DD}-V_o}{R_D}\n=\n\\beta_{\\rm eq}\\left[(V_{in}-V_T)V_o-\\frac{V_o^2}{2}\\right].\n}\n\\]\n\nEquivalently,\n\n\\[\n\\frac{k}{2}V_o^2-(1+kV)V_o+V_{DD}=0,\n\\]\n\nand the physical root is\n\n\\[\n\\boxed{\nV_o=\n\\frac{1+kV-\\sqrt{(1+kV)^2-2kV_{DD}}}{k}\n=\n\\frac{2V_{DD}}\n{1+kV+\\sqrt{(1+kV)^2-2kV_{DD}}}.\n}\n\\]\n\nThe transfer characteristic is monotonic and inverting: \\(V_o=V_{DD}\\) for low input, then falls quadratically in the saturation region and approaches a low value in the triode region.\n\n---\n\n## 4. Small-signal voltage gain\n\n### Composite saturation region\n\nThe effective transconductance is\n\n\\[\n\\boxed{\ng_{m,\\rm eq}\n=\\frac{\\partial I_D}{\\partial V_{in}}\n=\\beta_{\\rm eq}(V_{in}-V_T)\n=\\frac{2I_D}{V_{in}-V_T}.\n}\n\\]\n\nThus\n\n\\[\n\\boxed{\nA_v=-g_{m,\\rm eq}(R_D\\parallel r_{o,\\rm stack})\n}\n\\]\n\nand if channel-length modulation is neglected,\n\n\\[\n\\boxed{\nA_v\\simeq-\\beta_{\\rm eq}(V_{in}-V_T)R_D.\n}\n\\]\n\nFor identical devices,\n\n\\[\nA_v\\simeq-\\frac{\\beta}{2}(V_{in}-V_T)R_D.\n\\]\n\n### Composite triode region\n\nFrom the triode equation,\n\n\\[\ng_m=\\beta_{\\rm eq}V_o,\\qquad\ng_{ds}=\\beta_{\\rm eq}(V-V_o),\n\\]\n\nso\n\n\\[\n\\boxed{\nA_v=\n-\\frac{\\beta_{\\rm eq}V_o}\n{1/R_D+\\beta_{\\rm eq}(V-V_o)}\n}\n\\]\n\nor \\(A_v=-g_m(R_D\\parallel 1/g_{ds})\\).\n\n---\n\n## 5. Finite output resistance and body effect\n\nWith finite channel-length modulation, \\(M_2\\) is a saturated common-gate-like device and \\(M_1\\) provides a small-signal resistance at its source. This gives the cascode-like output resistance\n\n\\[\n\\boxed{\nr_{o,\\rm stack}\n\\simeq\nr_{o2}\\!\\left[1+(g_{m2}+g_{mb2})r_{d1}\\right]+r_{d1},\n}\n\\]\n\nwhere \\(r_{o2}\\simeq1/(\\lambda_2 I_D)\\) is the intrinsic output resistance of \\(M_2\\), \\(r_{d1}=1/g_{d1}\\) is the small-signal drain resistance of triode-region \\(M_1\\), and \\(g_{mb2}\\) is the body-effect transconductance.\n\nIgnoring body effect,\n\n\\[\ng_{d1}\\simeq\\beta_1u,\\qquad g_{m2}\\simeq\\beta_2u,\n\\]\n\nso\n\n\\[\nr_{o,\\rm stack}\\simeq\nr_{o2}\\left(1+\\frac{\\beta_2}{\\beta_1}\\right)+\\frac{1}{\\beta_1u}.\n\\]\n\nFor identical devices, \\(r_{o,\\rm stack}\\approx2r_{o2}\\) when \\(r_{o2}\\gg r_{d1}\\).\n\nIn an integrated process with the body of \\(M_2\\) tied to ground, its source is above ground, so\n\n\\[\nV_{T2}(V_X)=V_{T0}\n+\\gamma\\left[\\sqrt{2\\phi_F+V_X}-\\sqrt{2\\phi_F}\\right].\n\\]\n\nThen the exact \\(\\beta_{\\rm eq}\\) result no longer holds; \\(V_X\\) must be found from\n\n\\[\n\\beta_1\\left[(V_{in}-V_{T0})V_X-\\frac{V_X^2}{2}\\right]\n=\n\\frac{\\beta_2}{2}\n\\left[V_{in}-V_X-V_{T2}(V_X)\\right]^2.\n\\]\n\nBody effect reduces the current and transconductance, but the principal conclusion remains: \\(M_1\\) is in triode and \\(M_2\\) carries the same current in saturation.",
        "format": "markdown",
        "sha256": "8f92458fd0fc98159c2e64fcba65ee9fff493b70bc2f5e0217d03e5be117cfc3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the shared-gate series stack, shows that M1 is in triode while M2 is saturated in the relevant region, and derives the equivalent \u0001beta\u0001 that corresponds to a longer effective channel (twice the length for identical devices). The transfer and output-resistance analysis is consistent with this mechanism; the stated modeling assumptions are appropriate.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1088,
        "input_tokens": 1171,
        "output_tokens": 36335,
        "total_tokens": 37506,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34265,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1088,
        "input_tokens": 1171,
        "output_tokens": 36335,
        "total_tokens": 37506,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34265,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\n\\(M_1\\) and \\(M_2\\) form an NMOS source-coupled, or differential, pair:\n\n- \\(M_1\\) behaves as a source follower from \\(V_{\\text{in}}\\) to the common-source node \\(X\\).\n- \\(M_2\\), whose gate is at the fixed bias \\(V_b\\), behaves as a common-gate stage from \\(X\\) to the output.\n- The ideal current sink \\(I_1\\) forces\n  \\[\n  I_{D1}+I_{D2}=I_1.\n  \\]\n- Only the \\(M_2\\) drain is loaded by \\(R_D\\), so this is a single-ended-output differential pair.\n\nAssume initially that both devices are matched and saturated, \\(V_{DD}\\), \\(V_b\\), and the MOSFET bodies are ac grounds, \\(I_1\\) is ideal, and \\(\\lambda=\\gamma=0\\).\n\n---\n\n## 2. DC operating point\n\nLet \\(X\\) be the common-source voltage. In saturation,\n\n\\[\nI_{Di}=\\frac{\\beta_i}{2}\\left(V_{Gi}-V_X-V_{Ti}\\right)^2,\n\\qquad\n\\beta_i=\\mu_n C_{\\rm ox}\\left(\\frac WL\\right)_i ,\n\\]\n\nand\n\n\\[\nV_{\\text{out}}=V_{DD}-I_{D2}R_D,\\qquad I_{D1}+I_{D2}=I_1.\n\\]\n\nFor matched devices and balanced bias \\(V_{\\text{in},Q}=V_b\\),\n\n\\[\nI_{D1Q}=I_{D2Q}=\\frac{I_1}{2}.\n\\]\n\nThus, with \\(\\beta=\\mu_nC_{\\rm ox}(W/L)\\),\n\n\\[\nV_{OV,Q}=\\sqrt{\\frac{I_1}{\\beta}},\n\\]\n\n\\[\nV_{XQ}=V_b-V_{TN}-V_{OV,Q},\n\\]\n\nwhere \\(V_{TN}\\) should be evaluated at the operating value of \\(V_{SB}=V_X\\) if body effect is significant. The output bias is\n\n\\[\n\\boxed{V_{\\text{out},Q}=V_{DD}-\\frac{I_1R_D}{2}}\n\\]\n\nand\n\n\\[\ng_m=\\beta V_{OV,Q}=\\sqrt{\\beta I_1}.\n\\]\n\nRequired headroom conditions include\n\n\\[\nV_X\\ge V_{\\text{tail,min}},\n\\]\n\nand, for \\(M_2\\) to remain saturated,\n\n\\[\nV_{\\text{out}}-V_X\\ge V_{OV2}\n\\quad\\Longleftrightarrow\\quad\nV_{\\text{out}}\\gtrsim V_b-V_{TN}.\n\\]\n\n---\n\n## 3. Small-signal voltage gain\n\nLet \\(v_x\\) be the common-source small-signal voltage. Since \\(I_1\\) is ideal, it is an open circuit in the small-signal model. Also \\(v_b=0\\) and \\(V_{DD}=0\\) for ac.\n\nFor \\(M_1\\) and \\(M_2\\),\n\n\\[\ni_{d1}=g_{m1}(v_{\\text{in}}-v_x),\n\\qquad\ni_{d2}=-g_{m2}v_x.\n\\]\n\nKCL at the common-source node gives\n\n\\[\ni_{d1}+i_{d2}=0,\n\\]\n\nhence\n\n\\[\nv_x=\\frac{g_{m1}}{g_{m1}+g_{m2}}v_{\\text{in}}.\n\\]\n\nTherefore\n\n\\[\ni_{d2}\n=-\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}v_{\\text{in}}.\n\\]\n\nAt the output,\n\n\\[\n\\frac{v_{\\text{out}}}{R_D}+i_{d2}=0,\n\\]\n\nso\n\n\\[\n\\boxed{\nA_v\\equiv\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D\n}\n\\]\n\nand, for matched devices,\n\n\\[\n\\boxed{\nv_x=\\frac{v_{\\text{in}}}{2},\\qquad\ni_{d2}=-\\frac{g_m}{2}v_{\\text{in}},\\qquad\nA_v=+\\frac{g_mR_D}{2}.\n}\n\\]\n\nWith an external load \\(R_L\\), replace \\(R_D\\) by \\(R_D\\parallel R_L\\).\n\nThe gain is **non-inverting**:\n\n\\[\nV_{\\text{in}}\\uparrow\n\\Rightarrow I_{D1}\\uparrow\n\\Rightarrow V_X\\uparrow\n\\Rightarrow V_{GS2}\\downarrow\n\\Rightarrow I_{D2}\\downarrow\n\\Rightarrow V_{\\text{out}}\\uparrow.\n\\]\n\nMore generally, for a matched pair and ideal tail source,\n\n\\[\n\\boxed{\nv_{\\text{out}}\\simeq\n\\frac{g_mR_D}{2}\\left(v_{\\text{in}}-v_b\\right)\n}\n\\]\n\nwhere \\(v_b\\) is a small-signal variation on the \\(V_b\\) terminal.\n\n---\n\n## 4. Large-signal behavior\n\nLet \\(\\Delta V=V_{\\text{in}}-V_b\\) and \\(I_T=I_1\\). Neglecting channel-length modulation, the square-law differential-pair relation is\n\n\\[\nI_{D1}-I_{D2}\n=\n\\Delta V\n\\sqrt{\\beta I_T-\\frac{\\beta^2\\Delta V^2}{4}},\n\\]\n\nvalid while both devices conduct:\n\n\\[\n|\\Delta V|\\le \\sqrt{\\frac{2I_T}{\\beta}}\n=\\sqrt{2}\\,V_{OV,Q}.\n\\]\n\nSince\n\n\\[\nI_{D2}=\\frac{I_T-(I_{D1}-I_{D2})}{2},\n\\]\n\nthe output is\n\n\\[\nV_{\\text{out}}\n=\nV_{DD}-\\frac{I_TR_D}{2}\n+\n\\frac{R_D}{2}\\Delta V\n\\sqrt{\\beta I_T-\\frac{\\beta^2\\Delta V^2}{4}}.\n\\]\n\nAt the switching extremes,\n\n\\[\n\\begin{aligned}\nV_{\\text{in}}\\gg V_b &: \\quad M_2\\text{ off},\\quad V_{\\text{out}}\\to V_{DD},\\\\\nV_{\\text{in}}\\ll V_b &: \\quad M_1\\text{ off},\\quad V_{\\text{out}}\\to V_{DD}-I_1R_D.\n\\end{aligned}\n\\]\n\nThus the maximum output swing is approximately \\(I_1R_D\\), centered around \\(V_{DD}-I_1R_D/2\\), provided saturation and tail-current compliance are maintained. Differentiating the large-signal expression at \\(\\Delta V=0\\) gives \\(g_mR_D/2\\), consistent with the small-signal result.\n\n---\n\n## 5. Practical second-order effects\n\n### Input and output resistance\n\n- At low frequency, the input resistance is essentially infinite because \\(V_{\\text{in}}\\) drives a MOS gate.\n- With \\(r_o\\to\\infty\\), the output resistance is approximately \\(R_D\\).\n- For matched \\(r_{o1}=r_{o2}=r_o\\), an ideal tail source, and small \\(1/r_o\\), source feedback raises the effective output resistance of \\(M_2\\) to approximately \\(2r_o\\):\n  \\[\n  R_{\\text{out}}\\simeq R_D\\parallel 2r_o,\n  \\]\n  and\n  \\[\n  A_v\\simeq \\frac{g_m}{2}\\left(R_D\\parallel 2r_o\\right).\n  \\]\n\n### Body effect\n\nFor a matched pair and an ideal tail source, body effect does not change the first-order differential gain. If \\(g_{mb}\\) is included,\n\n\\[\nv_x=\\frac{g_m}{2(g_m+g_{mb})}v_{\\text{in}},\n\\]\n\nwhile\n\n\\[\ni_{d2}=-(g_m+g_{mb})v_x=-\\frac{g_m}{2}v_{\\text{in}},\n\\]\n\nso \\(g_{mb}\\) cancels. It does, however, change the common-source voltage and the input common-mode range.\n\n### Finite tail-current-source resistance\n\nIf the current sink has output resistance \\(r_t\\), the common-mode part of a single-ended input is no longer completely rejected. With channel-length modulation neglected,\n\n\\[\nA_v\\simeq\n\\frac{g_m(g_m+g_{mb})}\n{2(g_m+g_{mb})+1/r_t}\\,(R_D\\parallel R_L).\n\\]\n\nIf body effect is also neglected,\n\n\\[\n\\boxed{\nA_v\\simeq\n\\frac{g_mR_D}{2+1/(g_mr_t)}\n}\n\\]\n\nwhich tends to \\(g_mR_D/2\\) as \\(r_t\\to\\infty\\).\n\n### Fully general low-frequency expression\n\nLet \\(R_E=R_D\\parallel R_L\\), \\(G_E=1/R_E\\), \\(g_{oi}=1/r_{oi}\\), and \\(g_t=1/r_t\\). Define\n\n\\[\nA_1=g_{m1}+g_{mb1}+g_{o1},\\qquad\nA_2=g_{m2}+g_{mb2}+g_{o2},\\qquad\nD=A_1+A_2+g_t.\n\\]\n\nThe source and output node equations are\n\n\\[\nD v_x=g_{m1}v_{\\text{in}}+g_{o2}v_{\\text{out}},\n\\]\n\n\\[\n(G_E+g_{o2})v_{\\text{out}}=A_2v_x,\n\\]\n\ngiving\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_{m1}A_2}\n{D(G_E+g_{o2})-g_{o2}A_2}\n}.\n\\]\n\nThe corresponding output resistance is\n\n\\[\nR_{\\text{out}}\n=\n\\left[\nG_E+g_{o2}\\left(1-\\frac{A_2}{D}\\right)\n\\right]^{-1}.\n\\]\n\n---\n\n### Main result\n\nThe circuit is a noninverting, single-ended differential amplifier. Its low-frequency gain under the usual ideal assumptions is\n\n\\[\n\\boxed{A_v\\simeq+\\frac{g_mR_D}{2}},\n\\]\n\nwith \\(V_{\\text{out},Q}=V_{DD}-I_1R_D/2\\). The factor \\(1/2\\) arises because a single-ended input contains a differential component and a common-mode component; the ideal tail current source rejects the common-mode component.",
        "format": "markdown",
        "sha256": "f5362f5881234c79af18e832be57ba970f4be4373d19c9726b4ef7e17a067b47"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair as M1 source follower driving M2 common-gate, with M2’s gate biased at Vb and output at its drain. The derived gain is correctly non-inverting and approximately gmRD/2 for matched devices.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1881,
        "output_tokens": 30514,
        "total_tokens": 32395,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28436,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1881,
        "output_tokens": 30514,
        "total_tokens": 32395,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28436,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit interpretation\n\n\\(M_1\\) and \\(M_2\\) form an asymmetric NMOS differential, or source-coupled, pair:\n\n- Their sources are tied together at node \\(X\\) and to the ideal sink \\(I_1\\).\n- \\(M_1\\)'s drain is tied directly to \\(V_{DD}\\), hence to ac ground.\n- \\(M_2\\)'s drain is loaded by \\(R_D\\) and provides \\(V_{\\text{out}}\\).\n- \\(V_b\\) is normally a dc bias, so \\(v_b=0\\) in small signal.\n\nFrom a small-signal viewpoint, \\(M_1\\) is a source follower driving the source of \\(M_2\\), while \\(M_2\\) is a common-gate stage. The circuit is **non-inverting**:\n\n\\[\nV_{\\text{in}}\\uparrow \\Rightarrow I_{D1}\\uparrow\n\\Rightarrow I_{D2}\\downarrow\n\\Rightarrow I_{D2}R_D\\downarrow\n\\Rightarrow V_{\\text{out}}\\uparrow .\n\\]\n\nAssume initially that both devices are matched, in saturation, the tail source is ideal, and \\(\\lambda=\\gamma=0\\).\n\n---\n\n## 2. DC equations\n\nLet the common-source voltage be \\(V_X\\), and define\n\n\\[\nk_n=\\mu_n C_{\\rm ox}\\frac WL,\\qquad\nI_D=\\frac12 k_nV_{OV}^2 .\n\\]\n\nThen\n\n\\[\nI_{D1}=\\frac12k_n(V_{\\text{in}}-V_X-V_{TH})^2,\n\\]\n\n\\[\nI_{D2}=\\frac12k_n(V_b-V_X-V_{TH})^2,\n\\]\n\n\\[\nI_{D1}+I_{D2}=I_1,\n\\]\n\nand\n\n\\[\n\\boxed{V_{\\text{out}}=V_{DD}-I_{D2}R_D}.\n\\]\n\nBecause the ideal tail source fixes only the sum of the currents, \\(V_X\\) adjusts so that this sum is satisfied.\n\n### Balanced bias, \\(V_{\\text{in}}=V_b\\)\n\nFor matched transistors,\n\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2}.\n\\]\n\nThe overdrive and source voltage are\n\n\\[\nV_{OV0}=\\sqrt{\\frac{I_1}{k_n}},\n\\qquad\nV_X=V_b-V_{TH}-V_{OV0}.\n\\]\n\nThus\n\n\\[\n\\boxed{V_{\\text{out},Q}=V_{DD}-\\frac{I_1R_D}{2}}.\n\\]\n\nThe transconductance of each transistor at this point is\n\n\\[\ng_m=k_nV_{OV0}\n=\\sqrt{k_nI_1}\n=\\frac{I_1}{V_{OV0}}.\n\\]\n\n---\n\n## 3. Large-signal input-output characteristic\n\nDefine the differential input\n\n\\[\nd=V_{\\text{in}}-V_b.\n\\]\n\nFor matched devices and while both are on,\n\n\\[\ns=\\sqrt{\\frac{4I_1}{k_n}-d^2},\n\\]\n\n\\[\n\\boxed{\nI_{D2}\n=\n\\frac{I_1}{2}\n-\\frac{k_nd}{4}\n\\sqrt{\\frac{4I_1}{k_n}-d^2}\n}\n\\]\n\nand therefore\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}-\\frac{I_1R_D}{2}\n+\\frac{k_nR_Dd}{4}\n\\sqrt{\\frac{4I_1}{k_n}-d^2}\n}.\n\\]\n\nThis is valid for\n\n\\[\n|d|\\leq d_{\\max}\n=\\sqrt{\\frac{2I_1}{k_n}}\n=\\sqrt{2}\\,V_{OV0}.\n\\]\n\nOutside this range, the tail current is fully steered into one transistor:\n\n- \\(d\\ge d_{\\max}\\): \\(M_2\\) off,\n  \\[\n  I_{D2}=0,\\qquad V_{\\text{out}}=V_{DD}.\n  \\]\n\n- \\(d\\le -d_{\\max}\\): \\(M_2\\) carries all of \\(I_1\\),\n  \\[\n  I_{D2}=I_1,\\qquad V_{\\text{out}}=V_{DD}-I_1R_D,\n  \\]\n  provided \\(M_2\\) remains saturated.\n\nThus the ideal output range is\n\n\\[\nV_{DD}-I_1R_D \\le V_{\\text{out}}\\le V_{DD}.\n\\]\n\nWith an ideal tail source, the currents depend only on \\(V_{\\text{in}}-V_b\\); a common shift of both gate voltages produces no output change as long as headroom is maintained.\n\n---\n\n## 4. Small-signal voltage gain\n\nLet \\(R=R_D\\parallel R_L\\), where \\(R_L\\) is any external load to ac ground. Neglecting \\(r_o\\), body effect, and tail-source conductance, KCL at the common-source node gives\n\n\\[\ng_{m1}(v_{\\text{in}}-v_x)\n+\ng_{m2}(v_b-v_x)=0.\n\\]\n\nHence\n\n\\[\nv_x=\n\\frac{g_{m1}v_{\\text{in}}+g_{m2}v_b}\n{g_{m1}+g_{m2}}.\n\\]\n\nThe drain-current variation of \\(M_2\\) is\n\n\\[\ni_{d2}\n=g_{m2}(v_b-v_x)\n=\n-\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\n(v_{\\text{in}}-v_b).\n\\]\n\nSince \\(v_{\\text{out}}=-Ri_{d2}\\),\n\n\\[\n\\boxed{\nv_{\\text{out}}\n=\n\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\,\nR\\,(v_{\\text{in}}-v_b)\n}.\n\\]\n\nTherefore, with \\(V_b\\) at ac ground,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n+\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R\n}.\n\\]\n\nFor matched devices at the balanced point,\n\n\\[\n\\boxed{\nA_v=+\\frac{g_m}{2}R_D\n=+\\frac{R_D}{2}\\sqrt{k_nI_1}\n}.\n\\]\n\nAlso \\(v_x/v_{\\text{in}}=1/2\\): the source node follows the input by one-half, and the common-gate action of \\(M_2\\) converts that variation to an output current.\n\nThe same result follows by differentiating the large-signal expression at \\(d=0\\):\n\n\\[\n\\left.\\frac{dI_{D2}}{dV_{\\text{in}}}\\right|_{Q}\n=-\\frac{g_m}{2},\n\\qquad\n\\frac{dV_{\\text{out}}}{dV_{\\text{in}}}\n=+\\frac{g_mR_D}{2}.\n\\]\n\n---\n\n## 5. Body effect and finite tail resistance\n\nIf the bodies are at ac ground, define \\(g_{mb1},g_{mb2}\\) and \\(g_t=1/r_{\\text{tail}}\\). With \\(\\lambda=0\\),\n\n\\[\n\\boxed{\nA_v\n=\nR\\,\n\\frac{g_{m1}(g_{m2}+g_{mb2})}\n{g_{m1}+g_{mb1}+g_{m2}+g_{mb2}+g_t}\n}.\n\\]\n\nFor matched devices, equal body effect, and \\(r_{\\text{tail}}\\to\\infty\\), body effect cancels and the gain remains \\(g_mR_D/2\\). A finite tail resistance introduces common-mode sensitivity and slightly reduces the gain.\n\nA fully general small-signal expression retaining \\(r_o\\) can be written by defining\n\n\\[\nG_1=g_{m1}+g_{mb1}+g_{o1},\\qquad\nG_2=g_{m2}+g_{mb2}+g_{o2},\n\\]\n\n\\[\nD=G_1+G_2+g_t,\\qquad\nY=\\frac1R+g_{o2},\n\\]\n\ngiving\n\n\\[\nA_v=\\frac{g_{m1}G_2}{DY-g_{o2}G_2}.\n\\]\n\nFor matched devices, an ideal tail, and \\(r_{o1}=r_{o2}=r_o\\),\n\n\\[\n\\boxed{\nA_v\\simeq \\frac{g_m}{2}\n\\left(R_D\\parallel R_L\\parallel 2r_o\\right)\n},\n\\]\n\nand the pair contributes an output resistance of approximately \\(2r_o\\).\n\n---\n\n## 6. Headroom and practical limits\n\nFor saturation:\n\n- \\(M_2\\):\n  \\[\n  \\boxed{V_{\\text{out}}\\ge V_b-V_{TH}}.\n  \\]\n  In particular, full current steering requires\n  \\[\n  V_{DD}-I_1R_D\\ge V_b-V_{TH}.\n  \\]\n\n- \\(M_1\\), whose drain is at \\(V_{DD}\\):\n  \\[\n  V_{DD}\\ge V_{\\text{in}}-V_{TH},\n  \\]\n  usually not restrictive for normal input swings.\n\n- The tail source requires\n  \\[\n  V_X\\ge V_{\\text{tail,min}}.\n  \\]\n\nOther basic properties are:\n\n- Low-frequency input resistance: essentially infinite, apart from gate leakage/bias networks.\n- Output resistance with \\(\\lambda=0\\): approximately \\(R_D\\).\n- Static current drawn from \\(V_{DD}\\): \\(I_1\\), hence \\(P_{\\rm dc}\\approx V_{DD}I_1\\).\n- The circuit is a one-ended, non-inverting differential amplifier with small-signal gain \\(g_mR_D/2\\) for matched devices.",
        "format": "markdown",
        "sha256": "2a7608962c4c773af7c46cdce1ec443e8b4e284ce782c6ed9b19ff3a22359e0e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair as a source follower driving a common-gate stage, with M2 biased at Vb and output at its drain; it also gives the correct non-inverting gain.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1881,
        "output_tokens": 32381,
        "total_tokens": 34262,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30407,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1881,
        "output_tokens": 32381,
        "total_tokens": 34262,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30407,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nThe two NMOS devices form a **source-coupled pair**—one half of a differential pair—with a single-ended output.\n\nLet \\(V_X\\) be the common-source node and \\(I_T\\equiv I_1\\) be the ideal tail current. Then\n\n\\[\nI_{D1}+I_{D2}=I_T,\\qquad\nV_{\\text{out}}=V_{DD}-I_{D2}R_D .\n\\]\n\nAssuming matched transistors and \\(V_{\\text{in}}=V_b\\),\n\n\\[\nI_{D1}=I_{D2}=\\frac{I_T}{2},\n\\qquad\nV_{\\text{out},Q}=V_{DD}-\\frac{I_TR_D}{2}.\n\\]\n\nIncreasing \\(V_{\\text{in}}\\) steers current from \\(M_2\\) into \\(M_1\\), reducing \\(I_{D2}\\), reducing the drop across \\(R_D\\), and therefore **raising \\(V_{\\text{out}}\\)**. Thus the gain from \\(V_{\\text{in}}\\) to \\(V_{\\text{out}}\\) is noninverting.\n\n---\n\n## 2. Ideal small-signal gain\n\nAssume:\n\n- both devices are in saturation,\n- \\(M_1,M_2\\) are matched,\n- the tail source is ideal,\n- \\(V_b\\), \\(V_{DD}\\), and the bodies are ac ground,\n- \\(\\lambda=\\gamma=0\\),\n- no output load.\n\nBecause the tail current has no small-signal component,\n\n\\[\ni_{d1}+i_{d2}=0.\n\\]\n\nHence\n\n\\[\ng_m(v_{\\text{in}}-v_x)+g_m(v_b-v_x)=0\n\\]\n\nand therefore\n\n\\[\nv_x=\\frac{v_{\\text{in}}+v_b}{2}.\n\\]\n\nFor \\(M_2\\),\n\n\\[\ni_{d2}=g_m(v_b-v_x)\n      =-\\frac{g_m}{2}(v_{\\text{in}}-v_b).\n\\]\n\nAt the output,\n\n\\[\nv_{\\text{out}}=-i_{d2}R_D,\n\\]\n\nso\n\n\\[\n\\boxed{\nv_{\\text{out}}=\\frac{g_mR_D}{2}\\left(v_{\\text{in}}-v_b\\right)\n}\n\\]\n\nand, with \\(V_b\\) fixed,\n\n\\[\n\\boxed{A_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n      =+\\frac{g_mR_D}{2}}.\n\\]\n\nThe positive sign follows because output is taken from the drain of the transistor whose gate is not driven.\n\nFor an external load \\(R_L\\), replace \\(R_D\\) by \\(R_D\\parallel R_L\\). For unequal transconductances,\n\n\\[\n\\boxed{\nA_v=R_D\\,\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\n}\n\\]\n\nfor \\(v_b=0\\).\n\nAt the balanced bias point, if\n\n\\[\nI_D=\\frac{\\beta}{2}V_{OV}^2,\\qquad\n\\beta=\\mu_nC_{\\rm ox}\\frac WL,\n\\]\n\nthen\n\n\\[\nV_{OV,Q}=\\sqrt{\\frac{I_T}{\\beta}},\n\\qquad\ng_m=\\sqrt{\\beta I_T}=\\frac{I_T}{V_{OV,Q}}.\n\\]\n\nThe circuit can also be viewed as a source follower \\(M_1\\) driving the source of the common-gate device \\(M_2\\). For matched devices, \\(M_1\\) gives \\(v_x=v_{\\text{in}}/2\\), while \\(M_2\\) sees \\(v_{gs2}=-v_{\\text{in}}/2\\).\n\n---\n\n## 3. Large-signal transfer\n\nWith the square-law model and fixed threshold, define\n\n\\[\n\\Delta V=V_{\\text{in}}-V_b.\n\\]\n\nWhile both transistors conduct and remain saturated,\n\n\\[\nI_{D1}-I_{D2}\n=\n\\frac{\\beta}{2}\\Delta V\n\\sqrt{4V_{OV,Q}^{\\,2}-\\Delta V^2}\n=\nI_T\\frac{\\Delta V}{V_{OV,Q}}\n\\sqrt{1-\\frac{\\Delta V^2}{4V_{OV,Q}^{\\,2}}},\n\\]\n\nvalid for\n\n\\[\n|\\Delta V|\\leq \\sqrt{2}\\,V_{OV,Q}.\n\\]\n\nTherefore\n\n\\[\nV_{\\text{out}}\n=\nV_{DD}\n-\\frac{R_D}{2}\n\\left[I_T-\\left(I_{D1}-I_{D2}\\right)\\right].\n\\]\n\nThe limiting cases are\n\n\\[\n\\begin{array}{c|c|c}\n\\Delta V & \\text{Current steering} & V_{\\text{out}}\\\\ \\hline\n\\Delta V\\geq +\\sqrt{2}V_{OV,Q}\n& I_{D1}=I_T,\\ I_{D2}=0\n& V_{DD}\\\\[2mm]\n\\Delta V=0\n& I_{D1}=I_{D2}=I_T/2\n& V_{DD}-I_TR_D/2\\\\[2mm]\n\\Delta V\\leq-\\sqrt{2}V_{OV,Q}\n& I_{D1}=0,\\ I_{D2}=I_T\n& V_{DD}-I_TR_D\n\\end{array}\n\\]\n\nprovided \\(M_2\\) remains saturated. Thus the transfer characteristic is a monotonic, compressive “S” curve from \\(V_{DD}-I_TR_D\\) to \\(V_{DD}\\).\n\n---\n\n## 4. Bias and headroom conditions\n\nImportant saturation conditions are:\n\n- For \\(M_2\\):\n\n\\[\n\\boxed{V_{\\text{out}}\\geq V_b-V_{Tn}}\n\\]\n\nso the low-output extreme requires\n\n\\[\nV_{DD}-I_TR_D\\geq V_b-V_{Tn}.\n\\]\n\n- For \\(M_1\\):\n\n\\[\nV_{DD}-V_X\\geq V_{\\text{in}}-V_X-V_{Tn}\n\\quad\\Rightarrow\\quad\nV_{\\text{in}}\\lesssim V_{DD}+V_{Tn}.\n\\]\n\n- The tail current source requires adequate compliance voltage. At balance,\n\n\\[\nV_{X,Q}\\simeq V_b-V_{Tn}-V_{OV,Q}\n\\]\n\nmust exceed the minimum voltage needed by the current sink.\n\nIf \\(V_{\\text{out}}\\) falls below \\(V_b-V_{Tn}\\), \\(M_2\\) enters triode and the square-law saturation expression above is no longer valid.\n\n---\n\n## 5. Nonideal effects\n\n### Finite tail resistance and body effect\n\nLet\n\n\\[\nr_t=\\text{small-signal output resistance of }I_1,\\qquad\ng_t=\\frac1{r_t},\\qquad\nG=g_m+g_{mb}.\n\\]\n\nNeglecting transistor \\(r_o\\), driving only \\(V_{\\text{in}}\\) gives\n\n\\[\n\\boxed{\nA_v=R_D\\frac{g_mG}{2G+g_t}\n}\n\\]\n\nor, without body effect,\n\n\\[\n\\boxed{\nA_v=\\frac{g_mR_D}{2+1/(g_mr_t)}.\n}\n\\]\n\nThus an ideal tail source gives \\(A_v=g_mR_D/2\\), while finite \\(r_t\\) reduces the gain. Interestingly, for an ideal tail source, body effect cancels for matched devices:\n\n\\[\ng_t=0\\quad\\Rightarrow\\quad A_v=\\frac{g_mR_D}{2}.\n\\]\n\nA finite tail resistance also introduces common-mode gain. For a purely differential excitation, however, the differential gain remains \\(g_mR_D/2\\).\n\n### Channel-length modulation\n\nFor matched devices, an ideal tail source, and approximately equal \\(r_o\\),\n\n\\[\nR_{\\text{out}}\\simeq R_D\\parallel 2r_o\n\\]\n\nand\n\n\\[\n\\boxed{\nA_v\\simeq \\frac{g_m}{2}\n\\left(R_D\\parallel 2r_o\\right)\n=\n\\frac{g_m}{2/R_D+1/r_o}.\n}\n\\]\n\nWith a load capacitance \\(C_o\\), the dominant output pole is approximately\n\n\\[\n\\omega_p\\simeq \\frac{1}{R_{\\text{out}}C_o}.\n\\]\n\nThe low-frequency input resistance is essentially infinite because the input is a MOS gate; gate capacitances determine the high-frequency input impedance.\n\n---\n\n### Main result\n\nFor the usual ideal assumptions,\n\n\\[\n\\boxed{\nV_{\\text{out},Q}=V_{DD}-\\frac{I_1R_D}{2},\\qquad\nA_v=+\\frac{g_mR_D}{2}\n}\n\\]\n\nwith \\(g_m=\\sqrt{\\beta I_1}\\). The circuit is a noninverting, single-ended differential-pair amplifier: increasing \\(V_{\\text{in}}\\) reduces \\(M_2\\)'s current and raises \\(V_{\\text{out}}\\).",
        "format": "markdown",
        "sha256": "be6f276f15eb2043d883f5f935aabd5db697a90f2b6e171fd31ce85b103edc49"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair, also describes M1 as a source follower driving common-gate M2, and gives the correct noninverting gain.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1881,
        "output_tokens": 37491,
        "total_tokens": 39372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35746,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1881,
        "output_tokens": 37491,
        "total_tokens": 39372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35746,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To calculate \\(Z_{\\text{out}}\\), set \\(V_{in}=0\\) while leaving its source resistance \\(R_S\\) connected. Also, \\(V_{DD}\\) and \\(V_b\\) are ac grounds. Apply a test voltage \\(v_x\\) at the output and let \\(i_x\\) be the current entering the circuit.\n\nLet \\(C=C_{GS1}\\). Initially neglect \\(r_o\\), body effect, and other parasitics.\n\n### Small-signal relation at the gate\n\nKCL at the gate of \\(M_1\\) gives\n\n\\[\n\\frac{v_g}{R_S}+sC(v_g-v_x)=0,\n\\]\n\nhence\n\n\\[\nv_g=\\frac{sR_SC}{1+sR_SC}v_x,\n\\qquad\nv_x-v_g=\\frac{v_x}{1+sR_SC}.\n\\]\n\nAt the source of \\(M_1\\), both \\(g_m\\) and \\(C_{GS}\\) draw current:\n\n\\[\ni_{M1}=(g_{m1}+sC)(v_x-v_g).\n\\]\n\nTherefore,\n\n\\[\nY_{M1}=\\frac{i_{M1}}{v_x}\n      =\\frac{g_{m1}+sC}{1+sR_SC},\n\\]\n\nand\n\n\\[\nZ_{M1}=\\frac{1+sR_SC}{g_{m1}+sC}.\n\\]\n\nFor \\(s=j\\omega\\),\n\n\\[\n\\operatorname{Im}\\{Z_{M1}\\}\n=\n\\frac{\\omega C\\left(g_{m1}R_S-1\\right)}\n     {g_{m1}^2+(\\omega C)^2}.\n\\]\n\nThus\n\n\\[\n\\boxed{g_{m1}R_S>1\\quad\\Longleftrightarrow\\quad\nR_S>\\frac{1}{g_{m1}}}\n\\]\n\ngives \\(\\operatorname{Im}Z_{\\text{out}}>0\\), i.e. an inductive output impedance.\n\nAt low frequencies,\n\n\\[\nZ_{M1}\\approx \\frac{1}{g_{m1}}\n+s\\underbrace{\\frac{C}{g_{m1}}\n\\left(R_S-\\frac{1}{g_{m1}}\\right)}_{L_{\\rm eq}},\n\\]\n\nso the circuit looks like a resistance \\(1/g_m\\) in series with a positive inductance \\(L_{\\rm eq}\\).\n\n### Physical interpretation\n\nAt low frequency \\(C_{GS}\\) is open, the gate is ac-grounded through \\(R_S\\), and a positive output test voltage produces a current \\(g_m v_x\\), giving the familiar source-follower resistance \\(1/g_m\\).\n\nAs frequency increases, \\(C_{GS}\\) couples the output back to the gate. The gate voltage begins to follow the source, reducing \\(|v_{gs}|\\) and therefore reducing the \\(g_m\\)-generated current that normally lowers the output resistance. The impedance consequently rises with frequency. When \\(g_mR_S>1\\), the phase is such that the test current lags the test voltage—exactly the behavior of an inductor.\n\nEquivalently,\n\n\\[\n\\omega_z=\\frac{1}{R_SC},\\qquad\n\\omega_p=\\frac{g_m}{C}.\n\\]\n\nIf \\(R_S>1/g_m\\), the zero occurs below the pole; between them the impedance magnitude rises with frequency and its phase is positive, i.e. inductive.\n\n### Effect of \\(M_2\\) and other nonidealities\n\nWith \\(V_b\\) ac-grounded, \\(M_2\\)'s \\(g_{m2}\\) does not act; it mainly contributes \\(r_{o2}\\) in parallel. Including \\(r_{o1}\\), \\(r_{o2}\\), body effect, etc., define\n\n\\[\nG_p=g_{mb1}+g_{o1}+g_{o2}.\n\\]\n\nNeglecting other capacitances,\n\n\\[\nZ_{\\text{out}}\n=\n\\frac{1+sR_SC}\n{g_{m1}+G_p+sC(1+R_SG_p)},\n\\]\n\nwhose imaginary part still has the sign of \\(g_{m1}R_S-1\\). Thus finite output resistances change the effective \\(L\\), but not the basic condition. Output-to-ground capacitances eventually dominate at high frequency, so the inductance is a synthesized, frequency-band-limited active inductance rather than a physical coil.",
        "format": "markdown",
        "sha256": "fbe993493a923ce1bd09e9bf7e650cfdc5bc52567943854f65b4ba64eada826b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the output impedance and explains that it rises from about 1/gm1 toward RS as CGS1 couples the source to the gate. It identifies RS > 1/gm1 as the condition for inductive behavior; the additional nonideal analysis is consistent.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1373,
        "output_tokens": 22059,
        "total_tokens": 23432,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21199,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1373,
        "output_tokens": 22059,
        "total_tokens": 23432,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21199,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The “inductance” is an **active, frequency-dependent effect** caused by feedback through \\(C_{GS}\\) of \\(M_1\\) and the finite source resistance \\(R_S\\); there is no physical inductor.\n\nTo calculate \\(Z_{\\text{out}}\\), set \\(V_{in}=0\\). Thus \\(V_{DD}\\), \\(V_b\\), and the left side of \\(R_S\\) are ac grounds. Apply a test voltage \\(v_x\\) at the output and let the gate voltage of \\(M_1\\) be \\(v_g\\). Ignoring initially all capacitances except \\(C_{GS1}\\), KCL at the gate gives\n\n\\[\n\\frac{v_g}{R_S}+sC_{GS}(v_g-v_x)=0,\n\\]\n\nso\n\n\\[\nv_x-v_g=\\frac{v_x}{1+sR_SC_{GS}}.\n\\]\n\nThe current entering the source of \\(M_1\\) from the test source is\n\n\\[\ni_x=(g_m+sC_{GS})(v_x-v_g)\n   =\\frac{g_m+sC_{GS}}{1+sR_SC_{GS}}v_x.\n\\]\n\nHence, neglecting \\(r_{o2}\\) and other parasitics,\n\n\\[\nZ_{\\text{out}}=\n\\frac{v_x}{i_x}\n=\\frac{1+sR_SC_{GS}}{g_m+sC_{GS}}\n=\\frac{1}{g_m}\\frac{1+sR_SC_{GS}}{1+sC_{GS}/g_m}.\n\\]\n\nFor frequencies below the relevant poles,\n\n\\[\nZ_{\\text{out}}\\approx\n\\frac{1}{g_m}\n+s\\,\\frac{C_{GS}}{g_m^2}\\left(g_mR_S-1\\right).\n\\]\n\nThus, if\n\n\\[\n\\boxed{R_S>\\frac{1}{g_m}},\n\\]\n\nthen\n\n\\[\nZ_{\\text{out}}\\approx R_o+sL_{\\text{eff}},\n\\qquad\nL_{\\text{eff}}=\n\\frac{C_{GS}}{g_m^2}(g_mR_S-1)>0,\n\\]\n\nso \\(\\operatorname{Im}\\{Z_{\\text{out}}\\}>0\\): the output impedance is inductive. Equivalently, the zero \\(1/(R_SC_{GS})\\) occurs below the pole \\(g_m/C_{GS}\\), producing phase lead.\n\nPhysically, an output/source voltage perturbation couples through \\(C_{GS}\\) to the gate. Because the gate is connected to ground through finite \\(R_S\\), the gate voltage is approximately\n\n\\[\nv_g \\simeq sR_SC_{GS}v_x.\n\\]\n\nThe resulting source current contains\n\n\\[\n-g_m v_g \\simeq -s\\,g_mR_SC_{GS}v_x,\n\\]\n\na lagging current component. It competes with the ordinary leading capacitive current \\(sC_{GS}v_x\\). If \\(g_mR_S>1\\), the lagging component dominates and the impedance looks inductive.\n\nIncluding parasitics, let \\(C_T\\) be the total capacitance directly from the output to ac ground—\\(C_{GS}\\), \\(C_{SB}\\), \\(M_2\\)'s drain capacitances, load capacitance, etc.—and let \\(g_0\\) be the total low-frequency output conductance. Then\n\n\\[\nY_{\\text{out}}\\approx g_0+s\\left(C_T-g_mR_SC_{GS}\\right),\n\\]\n\n\\[\nZ_{\\text{out}}\\approx\n\\frac{1}{g_0}\n+s\\frac{g_mR_SC_{GS}-C_T}{g_0^2}.\n\\]\n\nTherefore the practical condition is\n\n\\[\ng_mR_SC_{GS}>C_T.\n\\]\n\nOther capacitances and device poles eventually make the impedance capacitive again, so the inductance exists only over a finite frequency range. A stiff gate drive, \\(R_S\\to0\\), eliminates the inductive effect.",
        "format": "markdown",
        "sha256": "2108746579a758529ce658ce2fe7d7a81ce11eb6ba9235001a03d0da9187baaf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the source-follower output impedance and identifies the inductive condition, \\(R_S>1/g_m\\), with the zero below the pole. The explanation captures the CGS–RS feedback mechanism; the added parasitic discussion does not undermine the central result.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1373,
        "output_tokens": 27461,
        "total_tokens": 28834,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26680,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1373,
        "output_tokens": 27461,
        "total_tokens": 28834,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26680,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "\\(M_1\\) is a source follower and \\(M_2\\) is the bias current sink. To find \\(Z_{\\text{out}}\\), set \\(v_{in}=0\\), so the gate of \\(M_1\\) is connected to ac ground through \\(R_S\\). Also \\(V_{DD}\\) and \\(V_b\\) are ac grounds.\n\nThe key is that the gate of \\(M_1\\) is **not an ideal ac ground** at high frequency. The output node is \\(M_1\\)’s source, and it is coupled to the gate through \\(C_{gs}\\).\n\nApply a test voltage \\(v_x\\) at \\(V_{\\text{out}}\\), and let the gate voltage be \\(v_g\\). Ignoring for the moment all capacitances except \\(C_{gs}\\), gate-node KCL gives\n\n\\[\n\\frac{v_g}{R_S}+sC_{gs}(v_g-v_x)=0\n\\]\n\nso\n\n\\[\n\\frac{v_g}{v_x}=\\frac{sR_S C_{gs}}{1+sR_S C_{gs}},\n\\qquad\nv_x-v_g=\\frac{v_x}{1+sR_S C_{gs}}.\n\\]\n\nThe current drawn from the test source by \\(M_1\\) is approximately\n\n\\[\ni_x=(g_m+sC_{gs})(v_x-v_g),\n\\]\n\nso\n\n\\[\nZ_{\\text{out}}(s)=\\frac{v_x}{i_x}\n=\\frac{1+sR_S C_{gs}}{g_m+sC_{gs}}.\n\\]\n\nAt \\(s=j\\omega\\),\n\n\\[\nZ_{\\text{out}}(j\\omega)\n=\n\\frac{g_m+\\omega^2 R_S C_{gs}^2}{g_m^2+\\omega^2 C_{gs}^2}\n+\nj\\omega\\,\n\\frac{C_{gs}(g_mR_S-1)}{g_m^2+\\omega^2 C_{gs}^2}.\n\\]\n\nThus if\n\n\\[\ng_mR_S>1,\n\\]\n\nthen \\(\\operatorname{Im}\\{Z_{\\text{out}}\\}>0\\), i.e. the output impedance is inductive. For low frequencies,\n\n\\[\nZ_{\\text{out}}\\approx \\frac{1}{g_m}\n+s\\,\\frac{C_{gs}(g_mR_S-1)}{g_m^2}\n= R_{\\text{out}}+sL_{\\text{eq}},\n\\]\n\nwith\n\n\\[\nL_{\\text{eq}}\\approx \\frac{C_{gs}(g_mR_S-1)}{g_m^2}.\n\\]\n\nThe physical reason is:\n\n- At low frequency, \\(C_{gs}\\) is open, the gate is held near ac ground, and the source follower has a low output resistance \\(\\approx 1/g_m\\).\n- As frequency rises, \\(C_{gs}\\) couples the source/output voltage to the gate.\n- Because \\(R_S\\) is finite, this capacitive current creates a gate voltage \\(v_g\\) that leads \\(v_x\\).\n- That gate voltage reduces \\(v_{gs}\\), so the \\(g_m\\) current that normally lowers the output impedance is reduced.\n- The \\(g_m\\) feedback therefore produces a term like \\(-s g_mR_S C_{gs}\\) in the output admittance, i.e. a negative capacitance. A negative capacitance in parallel with a conductance gives an impedance with positive imaginary part, which looks inductive.\n\nIn the full circuit, \\(M_2\\), \\(r_o\\), \\(C_{gd}\\), \\(C_{db}\\), and load capacitances add ordinary conductance and capacitance. If \\(C_o\\) is the total capacitance from the output to ground, the low-frequency admittance is roughly\n\n\\[\nY_{\\text{out}}\\approx G_0+s(C_o+C_{gs})-s g_mR_S C_{gs},\n\\]\n\nso the inductive behavior occurs when\n\n\\[\ng_mR_S C_{gs} > C_o+C_{gs}.\n\\]\n\nThus the “inductor” is not a physical coil; it is an active small-signal effect caused by \\(g_m\\), finite gate/source resistance \\(R_S\\), and \\(C_{gs}\\). It appears only over a finite frequency range, limited by the gate RC pole.",
        "format": "markdown",
        "sha256": "2142cea7ae89f8eb774dfad4f1f8656de66664d681fe1f9cbf383ea719a9dab2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower, derives the small-signal output impedance, and shows inductive behavior for g_m R_S > 1. The expression also implies the low-frequency limit 1/g_m and high-frequency limit R_S; the added parasitic-capacitance discussion does not undermine the core result.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1373,
        "output_tokens": 26643,
        "total_tokens": 28016,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25794,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1373,
        "output_tokens": 26643,
        "total_tokens": 28016,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25794,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nThe mirrored drawing of \\(M_2\\) is important:\n\n- \\(M_1\\): gate \\(=X\\), drain \\(=V_{\\text{out}}\\), source \\(=0\\)\n- \\(M_2\\): gate \\(=V_{\\text{out}}\\), drain \\(=X\\), source \\(=0\\)\n\nThus the two common-source stages are cross-coupled. Assume both are NMOS devices in saturation, with \\(\\lambda=0\\), no body effect, and \\(V_{DD}\\) at AC ground. Let\n\n\\[\n\\beta_i=\\mu_nC_{\\rm ox}\\left(\\frac WL\\right)_i,\\qquad\nI_{Di}=\\frac{\\beta_i}{2}(V_{GSi}-V_{TN})^2,\n\\qquad\ng_{mi}=\\beta_i(V_{GSi}-V_{TN}).\n\\]\n\n---\n\n## 2. DC operating point\n\nAt node \\(X\\), the MOS gates draw no DC current, so all of \\(I_{\\text{in}}\\) flows through \\(M_2\\):\n\n\\[\nI_{\\text{in}}=I_{D2}\n=\\frac{\\beta_2}{2}(V_{\\text{out}}-V_{TN})^2.\n\\]\n\nHence\n\n\\[\n\\boxed{V_{\\text{out}}=V_{TN}+\n\\sqrt{\\frac{2I_{\\text{in}}}{\\beta_2}}}.\n\\]\n\nAt the output node,\n\n\\[\nI_{D1}=\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}\n=\\frac{\\beta_1}{2}(V_X-V_{TN})^2,\n\\]\n\nso\n\n\\[\n\\boxed{\nV_X=V_{TN}+\n\\sqrt{\\frac{2}{\\beta_1R_{D1}}\n\\left[\nV_{DD}-V_{TN}\n-\\sqrt{\\frac{2I_{\\text{in}}}{\\beta_2}}\n\\right]}\n}.\n\\]\n\nThese results require\n\n\\[\nV_{\\text{out}}\\ge V_X-V_{TN}\n\\quad\\text{and}\\quad\nV_X\\ge V_{\\text{out}}-V_{TN}\n\\]\n\nfor \\(M_1\\) and \\(M_2\\), respectively, to remain saturated. Also \\(V_{\\text{out}}<V_{DD}\\).\n\n---\n\n## 3. Low-frequency small-signal behavior\n\nUse lowercase \\(v_x,v_o,i_{\\text{in}}\\) for incremental quantities.\n\n### Output node\n\nSince \\(M_1\\) has gate voltage \\(v_x\\),\n\n\\[\ni_{d1}=g_{m1}v_x.\n\\]\n\nThe incremental resistor current is \\(-v_o/R_{D1}\\), hence\n\n\\[\ng_{m1}v_x=-\\frac{v_o}{R_{D1}},\n\\]\n\nor\n\n\\[\n\\boxed{\\frac{v_o}{v_x}=-g_{m1}R_{D1}}.\n\\]\n\nThis is the gain of the inverting common-source stage \\(M_1\\).\n\n### Input node\n\nThe gate of \\(M_2\\) is the output node, so\n\n\\[\ni_{d2}=g_{m2}v_o.\n\\]\n\nKCL at \\(X\\) gives\n\n\\[\n\\boxed{i_{\\text{in}}=g_{m2}v_o}.\n\\]\n\nTherefore\n\n\\[\n\\boxed{\\frac{v_o}{i_{\\text{in}}}=\\frac{1}{g_{m2}}}.\n\\]\n\nCombining the two equations,\n\n\\[\nv_x=-\\frac{v_o}{g_{m1}R_{D1}}\n=-\\frac{i_{\\text{in}}}\n{g_{m1}g_{m2}R_{D1}}.\n\\]\n\nThus the small-signal resistance seen by the input current source is\n\n\\[\n\\boxed{\nR_{\\text{in}}=\\frac{v_x}{i_{\\text{in}}}\n=-\\frac{1}{g_{m1}g_{m2}R_{D1}}\n}.\n\\]\n\nEquivalently, the input conductance is\n\n\\[\n\\boxed{G_{\\text{in}}=-g_{m1}g_{m2}R_{D1}}.\n\\]\n\nSo the circuit synthesizes a **negative resistance**. A positive \\(v_x\\) lowers \\(v_o\\), which reduces the current sunk by \\(M_2\\); consequently current is returned to the test source. The energy comes from \\(V_{DD}\\).\n\nAt the DC operating point,\n\n\\[\ng_{m2}=\\sqrt{2\\beta_2 I_{\\text{in}}},\n\\qquad\ng_{m1}=\n\\sqrt{\\frac{2\\beta_1(V_{DD}-V_{\\text{out}})}{R_{D1}}}.\n\\]\n\nThe same negative resistance follows by differentiating the large-signal expression for \\(V_X(I_{\\text{in}})\\).\n\n---\n\n## 4. Feedback and stability\n\nThere are two inversions around the cross-coupled loop:\n\n\\[\nX \\xrightarrow{M_1} V_{\\text{out}}:\\quad -g_{m1}R_y,\n\\]\n\n\\[\nV_{\\text{out}}\\xrightarrow{M_2}X:\\quad -g_{m2}R_x,\n\\]\n\nwhere\n\n\\[\nR_y=R_{D1}\\parallel r_{o1},\\qquad\nR_x=r_{o2}\\quad\\text{(or \\(r_{o2}\\parallel R_{\\text{source}}\\))}.\n\\]\n\nThe loop gain is therefore positive:\n\n\\[\n\\boxed{L=g_{m1}g_{m2}R_xR_y}.\n\\]\n\nWith finite output resistances,\n\n\\[\nR_{\\text{in}}=\\frac{R_x}{1-L},\n\\qquad\nR_{\\text{out}}=\\frac{R_y}{1-L},\n\\]\n\nand\n\n\\[\n\\frac{v_o}{i_{\\text{in}}}\n=\\frac{1}{g_{m2}(1-1/L)}.\n\\]\n\nFor \\(L\\gg1\\), these reduce to \\(v_o/i_{\\text{in}}\\approx1/g_{m2}\\) and the negative input resistance found above. In the ideal \\(\\lambda=0\\) case, \\(r_{o2}\\to\\infty\\), giving formally \\(R_{\\text{out}}\\to0\\).\n\nBecause the feedback is regenerative, an isolated bias point with \\(L>1\\) is generally unstable with parasitic node capacitances; the circuit behaves as a latch/negative-resistance element unless an external source impedance, control loop, or resonator stabilizes it. This is precisely why such a circuit can be used to cancel tank losses in an oscillator.\n\n### Main results\n\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{i_{\\text{in}}}=\\frac{1}{g_{m2}}}\n\\]\n\n\\[\n\\boxed{R_{\\text{in}}\n=-\\frac{1}{g_{m1}g_{m2}R_{D1}}}\n\\]\n\n\\[\n\\boxed{V_{\\text{out,DC}}\n=V_{TN}+\\sqrt{\\frac{2I_{\\text{in}}}{\\beta_2}}}\n\\]\n\nunder saturation and \\(\\lambda=0\\).",
        "format": "markdown",
        "sha256": "5e193b6b4676c91b4d2cb57b8ddb68c92414f7ae4df6b2474cecb17434b9bef0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as tied to Vout, recognizes the positive-feedback loop, and states its negative-resistance and instability/latching consequences, satisfying the full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1733,
        "output_tokens": 31000,
        "total_tokens": 32733,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29627,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1733,
        "output_tokens": 31000,
        "total_tokens": 32733,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29627,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit interpretation\n\nThe mirrored MOS symbols indicate two n-channel devices with grounded sources/bodies:\n\n- \\(M_1:\\; G=X,\\; D=V_{\\text{out}},\\; S=0\\)\n- \\(M_2:\\; G=V_{\\text{out}},\\; D=X,\\; S=0\\)\n\nThus \\(M_1\\) and \\(M_2\\) form two common-source stages in a closed loop. Let \\(R_D\\equiv R_{D1}\\).\n\n---\n\n## 2. DC operation\n\nSince MOS gates draw no dc current,\n\n\\[\nI_{D2}=I_{\\text{in}},\n\\qquad\nI_{D1}=\\frac{V_{DD}-V_{\\text{out}}}{R_D}.\n\\]\n\nAssume square-law saturation, common threshold \\(V_T\\), \\(\\lambda=0\\), and define\n\n\\[\n\\beta_i=\\mu_n C_{\\rm ox}\\left(\\frac WL\\right)_i .\n\\]\n\nThen\n\n\\[\nI_{D1}=\\frac{\\beta_1}{2}(V_X-V_T)^2,\n\\qquad\nI_{D2}=\\frac{\\beta_2}{2}(V_{\\text{out}}-V_T)^2.\n\\]\n\nConsequently,\n\n\\[\n\\boxed{\nV_{\\text{out}}=V_T+\\sqrt{\\frac{2I_{\\text{in}}}{\\beta_2}}\n}\n\\]\n\nand\n\n\\[\n\\boxed{\nV_X=V_T+\n\\sqrt{\\frac{2(V_{DD}-V_{\\text{out}})}\n{\\beta_1R_D}}\n}.\n\\]\n\nInterestingly, \\(V_{\\text{out}}\\) is independent of \\(M_1\\) and \\(R_D\\) under these idealized assumptions; \\(M_1\\) and \\(R_D\\) determine \\(V_X\\) and whether the transistors remain saturated.\n\nThe saturation requirements are\n\n\\[\nV_{\\text{out}}\\ge V_X-V_T \\quad (M_1),\n\\qquad\nV_X\\ge V_{\\text{out}}-V_T \\quad (M_2).\n\\]\n\nOutside these ranges, triode-region equations must be used and multiple dc solutions can occur.\n\nWith channel-length modulation,\n\n\\[\nI_{\\text{in}}=\n\\frac{\\beta_2}{2}(V_{\\text{out}}-V_T)^2(1+\\lambda_2V_X),\n\\]\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}=\n\\frac{\\beta_1}{2}(V_X-V_T)^2(1+\\lambda_1V_{\\text{out}}),\n\\]\n\nwhich generally must be solved simultaneously.\n\n---\n\n## 3. Low-frequency small-signal result\n\nFor \\(\\lambda=0\\), let \\(g_{m1},g_{m2}\\) be the bias transconductances. At the output node,\n\n\\[\n\\frac{v_{\\text{out}}}{R_D}+g_{m1}v_x=0\n\\quad\\Rightarrow\\quad\nv_{\\text{out}}=-g_{m1}R_Dv_x .\n\\]\n\nAt node \\(X\\),\n\n\\[\ni_{\\text{in}}=g_{m2}v_{\\text{out}}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{i_{\\text{in}}}=\\frac{1}{g_{m2}}}\n\\]\n\nand\n\n\\[\n\\boxed{\n\\frac{v_x}{i_{\\text{in}}}\n=-\\frac{1}{g_{m1}g_{m2}R_D}\n}.\n\\]\n\nThe first result agrees with the derivative of the large-signal expression:\n\n\\[\n\\frac{dV_{\\text{out}}}{dI_{\\text{in}}}\n=\\frac{1}{\\sqrt{2\\beta_2I_{\\text{in}}}}\n=\\frac{1}{g_{m2}}.\n\\]\n\nThe second result is a **negative input resistance** at \\(X\\).\n\n---\n\n## 4. Feedback polarity and stability\n\nThe feedback is regenerative. For example,\n\n\\[\nv_x\\uparrow\n\\Rightarrow I_{D1}\\uparrow\n\\Rightarrow v_{\\text{out}}\\downarrow\n\\Rightarrow I_{D2}\\downarrow\n\\Rightarrow \\text{more input current charges }X\n\\Rightarrow v_x\\uparrow .\n\\]\n\nEach common-source stage contributes an inversion, so the loop has two inversions and hence positive feedback. It is a shunt-mixed, voltage-sampled feedback loop, but with the wrong sign for an ordinary transimpedance amplifier.\n\nInclude finite output conductances:\n\n\\[\nG_o=\\frac1{R_D}+g_{o1},\\qquad R_o=\\frac1{G_o},\n\\]\n\n\\[\nG_x=g_{o2}+g_s,\\qquad R_x=\\frac1{G_x},\n\\]\n\nwhere \\(g_s\\) is any small-signal conductance of the current source. The small-signal equations are\n\n\\[\nG_ov_{\\text{out}}+g_{m1}v_x=0,\n\\qquad\nG_xv_x+g_{m2}v_{\\text{out}}=i_{\\text{in}}.\n\\]\n\nThe positive loop gain is\n\n\\[\n\\boxed{L=g_{m1}g_{m2}R_oR_x}.\n\\]\n\nThe low-frequency transimpedance and impedances become\n\n\\[\n\\boxed{\n\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n=-\\frac{g_{m1}R_oR_x}{1-L}\n},\n\\]\n\n\\[\n\\boxed{\nR_{\\text{in}}=\\frac{R_x}{1-L},\n\\qquad\nR_{\\text{out}}=\\frac{R_o}{1-L}\n}.\n\\]\n\nThus \\(L=1\\) gives infinite gain/singular operation, while \\(L>1\\) gives negative small-signal resistances and an unstable nominal operating point.\n\nWith node capacitances \\(C_x,C_o\\), neglecting \\(C_{gd}\\),\n\n\\[\n\\frac{v_{\\text{out}}}{i_{\\text{in}}}(s)\n=\n-\\frac{g_{m1}}\n{(G_x+sC_x)(G_o+sC_o)-g_{m1}g_{m2}} .\n\\]\n\nThe characteristic polynomial is\n\n\\[\nC_xC_os^2+(G_xC_o+G_oC_x)s+G_oG_x(1-L).\n\\]\n\nHence the linearized equilibrium is stable only if\n\n\\[\n\\boxed{L<1}.\n\\]\n\nTypically \\(g_{o2}\\) is small and \\(L\\gg1\\), so the circuit does not behave as a stable linear amplifier. It behaves as a regenerative latch/Schmitt-trigger-like circuit. Its stable states generally involve one transistor being off or in triode; switching thresholds are obtained from the triode-region equations and the condition \\(L=1\\).\n\n**Summary:** under ideal saturated operation the circuit formally gives \\(Z_T=1/g_{m2}\\) and a negative input resistance, but the two-inverter loop is positive feedback and will normally require finite damping \\(L<1\\); otherwise it latches into one of two large-signal states.",
        "format": "markdown",
        "sha256": "db700a78449ee8d7f4c030d7dfd7e77057022f1e13c5de000ee4329c0ab02147"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as tied to Vout, recognizes the positive-feedback loop, and explains the resulting negative input resistance and instability/latching. The full-credit rule does not require a precise input-resistance formula.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1733,
        "output_tokens": 40803,
        "total_tokens": 42536,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39419,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1733,
        "output_tokens": 40803,
        "total_tokens": 42536,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39419,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(R_D\\equiv R_{D1}\\) and \\(V_o\\equiv V_{\\text{out}}\\). Interpreting the devices as NMOS transistors with grounded sources/bodies, the important connections are\n\n\\[\nV_{G1}=V_{D2}=V_X,\\qquad V_{D1}=V_{G2}=V_o .\n\\]\n\nThus \\(M_1\\) and \\(M_2\\) form two cross-coupled common-source stages. The current source injects current into node \\(X\\), while \\(R_D\\) supplies current to the output node.\n\n---\n\n## 1. DC operation\n\nSince MOS gates draw no dc current,\n\n\\[\nI_{D2}=I_{\\text{in}},\n\\qquad\nI_{D1}=\\frac{V_{DD}-V_o}{R_D}.\n\\]\n\nAssume square-law operation, neglect channel-length modulation, and let\n\n\\[\n\\beta_i=\\mu_n C_{\\mathrm{ox}}\\left(\\frac WL\\right)_i .\n\\]\n\nIf both devices are saturated,\n\n\\[\nI_{\\text{in}}\n=\\frac{\\beta_2}{2}(V_o-V_{T2})^2 ,\n\\]\n\nso\n\n\\[\n\\boxed{V_o=V_{T2}+\\sqrt{\\frac{2I_{\\text{in}}}{\\beta_2}}}\n\\]\n\nand\n\n\\[\n\\frac{V_{DD}-V_o}{R_D}\n=\\frac{\\beta_1}{2}(V_X-V_{T1})^2 ,\n\\]\n\ngiving\n\n\\[\n\\boxed{\nV_X=V_{T1}+\n\\sqrt{\\frac{2(V_{DD}-V_o)}{\\beta_1R_D}}\n}.\n\\]\n\nThe corresponding transconductances are\n\n\\[\ng_{m2}=\\sqrt{2\\beta_2 I_{\\text{in}}},\n\\qquad\ng_{m1}=\\sqrt{\\frac{2\\beta_1(V_{DD}-V_o)}{R_D}} .\n\\]\n\nThese expressions require\n\n\\[\nV_o\\ge V_X-V_{T1}\\qquad(M_1\\text{ saturated}),\n\\]\n\\[\nV_X\\ge V_o-V_{T2}\\qquad(M_2\\text{ saturated}).\n\\]\n\nOtherwise the appropriate triode-region equation must be used. With channel-length modulation, the dc equations become coupled:\n\n\\[\nI_{\\text{in}}\n=\\frac{\\beta_2}{2}(V_o-V_{T2})^2(1+\\lambda_2V_X),\n\\]\n\n\\[\n\\frac{V_{DD}-V_o}{R_D}\n=\\frac{\\beta_1}{2}(V_X-V_{T1})^2(1+\\lambda_1V_o).\n\\]\n\n---\n\n## 2. Low-frequency small-signal analysis\n\nLet\n\n\\[\ng_{oi}=\\frac1{r_{oi}},\\qquad\nG_D=\\frac1{R_D},\n\\]\n\\[\nG_1=G_D+g_{o1},\\qquad\nG_2=g_{o2}.\n\\]\n\nWith \\(V_{DD}\\) at ac ground, the small-signal node equations are\n\n\\[\ni_{\\text{in}}=G_2v_x+g_{m2}v_o ,\n\\]\n\n\\[\nG_1v_o+g_{m1}v_x=0 .\n\\]\n\nThe output equation gives the gain of the \\(M_1\\) stage:\n\n\\[\nv_o=-A_1v_x,\\qquad\nA_1=\\frac{g_{m1}}{G_1}\n=g_{m1}(R_D\\parallel r_{o1}) .\n\\]\n\nHence\n\n\\[\ni_{\\text{in}}\n=\\left(G_2-g_{m2}A_1\\right)v_x .\n\\]\n\n### Input impedance at \\(X\\)\n\n\\[\n\\boxed{\nZ_{\\text{in},X}\n=\\frac{v_x}{i_{\\text{in}}}\n=\\frac{1}{G_2-g_{m2}A_1}\n=\\frac{r_{o2}}{1-T}\n}\n\\]\n\nwhere the loop gain is\n\n\\[\n\\boxed{\nT=g_{m2}A_1r_{o2}\n=g_{m1}(R_D\\parallel r_{o1})\\,g_{m2}r_{o2}\n}.\n\\]\n\nFor \\(T>1\\), the input resistance is negative.\n\n### Transimpedance gain\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{\\text{in}}}\n=-A_1Z_{\\text{in},X}\n=\\frac{g_{m1}}{g_{m1}g_{m2}-G_1G_2}\n=\\frac{T}{g_{m2}(T-1)}\n}\n\\]\n\nIn the usual ideal-\\(\\lambda=0\\) approximation, \\(r_{o1},r_{o2}\\to\\infty\\), so \\(T\\to\\infty\\), and\n\n\\[\n\\boxed{\\frac{v_o}{i_{\\text{in}}}\\simeq \\frac1{g_{m2}}}\n\\]\n\nor, using \\(g_{m2}=\\sqrt{2\\beta_2I_{\\text{in}}}\\),\n\n\\[\n\\frac{v_o}{i_{\\text{in}}}\n=\\frac{1}{\\sqrt{2\\beta_2 I_{\\text{in}}}} .\n\\]\n\nSimilarly,\n\n\\[\n\\boxed{\nZ_{\\text{in},X}\n\\simeq -\\frac{1}{g_{m1}g_{m2}R_D}\n}\n\\]\n\nwhen \\(r_{o1}\\to\\infty\\). Thus an increase in input current raises \\(V_{\\text{out}}\\) but lowers \\(V_X\\): the circuit presents a negative differential resistance at \\(X\\).\n\n### Output impedance\n\nWith the input current source set to zero (open-circuited),\n\n\\[\n\\boxed{\nZ_{\\text{out}}\n=\\frac{R_D\\parallel r_{o1}}{1-T}\n}\n\\]\n\nwhich is also negative for \\(T>1\\).\n\n---\n\n## 3. Feedback and stability\n\nThere are two common-source inversions around the loop:\n\n\\[\nv_X\\uparrow \\Rightarrow v_o\\downarrow\n\\Rightarrow I_{D2}\\downarrow\n\\Rightarrow v_X\\uparrow .\n\\]\n\nTherefore this is **positive feedback**, not negative feedback. The factor \\(1-T\\) in all the impedance expressions is characteristic of positive feedback.\n\n- \\(T<1\\): a stable, finite-gain linear operating point is possible.\n- \\(T=1\\): the low-frequency gain diverges; this is the latch/switching threshold.\n- \\(T>1\\): negative input/output resistance and regenerative behavior; the formal bias point is unstable.\n\nIncluding capacitances \\(C_X\\) and \\(C_o\\), and neglecting inter-node \\(C_{gd}\\), the characteristic equation is\n\n\\[\n(C_Xs+G_2)(C_os+G_1)-g_{m1}g_{m2}=0,\n\\]\n\nwhose constant term is \\(G_1G_2(1-T)\\). Thus \\(T>1\\) produces a right-half-plane pole. Since \\(g_mr_o\\) is normally large, \\(T\\gg1\\) is typical; the circuit therefore behaves as a regenerative/bistable latch or negative-resistance element rather than as a stable linear transimpedance amplifier. The \\(1/g_{m2}\\) result is the static, forced small-signal result about a stabilized operating point.",
        "format": "markdown",
        "sha256": "35622f20f06ba932844241e7841ebf9d0122ad63be9d8f83231c3b7e35e3b15d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2's gate as tied to Vout, the positive-feedback loop, and the resulting negative input resistance and instability/latching for loop gain above one. Its small-signal analysis agrees with the golden solution.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1733,
        "output_tokens": 38622,
        "total_tokens": 40355,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 37193,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1733,
        "output_tokens": 38622,
        "total_tokens": 40355,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 37193,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit function and feedback polarity\n\nTreat \\(V_{DD}\\), \\(V_b\\), and the source of \\(M_2\\) as ac ground. Assume low-frequency operation, \\(r_o\\to\\infty\\), and initially neglect body effect.\n\n- \\(M_1\\) is a **common-gate** stage: its gate is held at \\(V_b\\), input current enters its source, and its drain is node \\(X\\).\n- \\(M_2\\) is a **common-source** stage: its gate is driven from \\(X\\), and its drain is the output.\n- \\(R_F\\) feeds the output voltage back as a current to the input source node.\n\nA positive input current tends to raise the source voltage of \\(M_1\\), thereby raising \\(X\\), increasing the current of \\(M_2\\), and lowering \\(V_{\\text{out}}\\). The negative output then draws current through \\(R_F\\) away from the input node, opposing \\(I_{\\text{in}}\\). Hence this is **shunt-shunt negative feedback**, i.e. a transimpedance amplifier. Both input and output resistances are reduced by feedback.\n\n---\n\n## 2. Small-signal equations\n\nLet\n\n\\[\ng_1=g_{m1},\\qquad g_2=g_{m2},\\qquad r_s=\\frac{1}{g_1},\n\\]\n\nand let \\(v_s\\), \\(v_X\\), and \\(v_o\\) be the small-signal voltages at the \\(M_1\\) source, node \\(X\\), and output, respectively.\n\nDefine the feedback current in the direction shown:\n\n\\[\ni_{RF}=\\frac{v_o-v_s}{R_F}.\n\\]\n\nKCL at the source of \\(M_1\\) gives\n\n\\[\ng_1v_s=I_{\\text{in}}+i_{RF},\n\\]\n\nso\n\n\\[\nv_s=r_s\\left(I_{\\text{in}}+i_{RF}\\right),\n\\]\n\nand the common-gate stage gives\n\n\\[\nv_X=g_1R_{D1}v_s\n    =R_{D1}\\left(I_{\\text{in}}+i_{RF}\\right).\n\\]\n\nAlso,\n\n\\[\nv_o=v_s+R_Fi_{RF}\n   =r_sI_{\\text{in}}+(R_F+r_s)i_{RF}.\n\\]\n\nKCL at the output is\n\n\\[\n\\frac{v_o}{R_{D2}}+g_2v_X+i_{RF}=0.\n\\]\n\nDefine the open-loop transresistance and sum of resistances\n\n\\[\nA_T\\equiv g_2R_{D1}R_{D2},\\qquad\nS\\equiv R_F+R_{D2}+r_s.\n\\]\n\nSolving the above equations,\n\n\\[\n\\boxed{\\frac{i_{RF}}{I_{\\text{in}}}\n=-\\frac{r_s+A_T}{S+A_T}}.\n\\]\n\nThus, for large \\(A_T\\), \\(i_{RF}\\approx -I_{\\text{in}}\\): almost all the input current is balanced by the feedback current, and the input node becomes nearly a virtual ground.\n\n---\n\n## 3. Loop gain\n\nA convenient place to break the loop is node \\(X\\), since the gate of \\(M_2\\) draws no low-frequency current.\n\nWith \\(I_{\\text{in}}=0\\), the source of \\(M_1\\) presents approximately \\(r_s\\). The load seen by \\(M_2\\) while calculating the return ratio is\n\n\\[\nR_L=R_{D2}\\parallel(R_F+r_s).\n\\]\n\nFor a test voltage \\(v_t\\) applied to the gate of \\(M_2\\),\n\n\\[\nv_o=-g_2R_Lv_t.\n\\]\n\nThe RF branch current is \\(v_o/(R_F+r_s)\\), and the common-gate device transfers essentially this same current into \\(R_{D1}\\), giving a returned voltage\n\n\\[\nv_{X,\\mathrm{ret}}\n=R_{D1}\\frac{v_o}{R_F+r_s}.\n\\]\n\nTherefore the signed return ratio is\n\n\\[\n\\frac{v_{X,\\mathrm{ret}}}{v_t}\n=-g_2R_{D1}\\frac{R_L}{R_F+r_s}\n=-\\frac{g_2R_{D1}R_{D2}}{R_F+R_{D2}+r_s}.\n\\]\n\nHence\n\n\\[\n\\boxed{\nT=\\frac{g_2R_{D1}R_{D2}}\n        {R_F+R_{D2}+r_s}\n=\\frac{A_T}{S}\n}\n\\]\n\nand the negative-feedback denominator is \\(1+T=(S+A_T)/S\\).\n\nIf \\(r_s\\ll R_F\\),\n\n\\[\nT\\approx g_2R_{D1}(R_{D2}\\parallel R_F),\n\\]\n\nand for \\(R_F\\gg R_{D2}\\),\n\n\\[\nT\\approx \\frac{g_2R_{D1}R_{D2}}{R_F}.\n\\]\n\n---\n\n## 4. Closed-loop transimpedance\n\nThe exact small-signal result is\n\n\\[\n\\boxed{\n\\frac{v_o}{I_{\\text{in}}}\n=\\frac{R_{D2}r_s-A_TR_F}{S+A_T}\n}\n\\]\n\nor, directly in terms of the transistor parameters,\n\n\\[\n\\boxed{\n\\frac{v_o}{I_{\\text{in}}}\n=\n\\frac{R_{D2}\\left[1-g_{m1}g_{m2}R_{D1}R_F\\right]}\n{1+g_{m1}(R_F+R_{D2})\n +g_{m1}g_{m2}R_{D1}R_{D2}}\n}.\n\\]\n\nIt is useful to write this in feedback form:\n\n\\[\n\\frac{v_o}{I_{\\text{in}}}\n=\n\\frac{1}{1+T}\n\\left[\n\\frac{R_{D2}r_s}{S}-R_FT\n\\right].\n\\]\n\nThe first term is the small direct feedthrough through \\(R_F\\) when \\(g_{m2}=0\\). If that term is negligible,\n\n\\[\n\\boxed{\n\\frac{v_o}{I_{\\text{in}}}\n\\approx -R_F\\frac{T}{1+T}\n}.\n\\]\n\nFor \\(T\\gg1\\),\n\n\\[\n\\boxed{\nv_o\\approx -R_F I_{\\text{in}}\n}\n\\]\n\nand the circuit behaves as an ideal transimpedance amplifier. The negative sign follows from the indicated input and \\(i_{RF}\\) current directions.\n\n---\n\n## 5. Input and output resistances\n\nWith the loop opened but retaining the loading due to \\(R_F\\),\n\n\\[\nR_{\\text{in},0}=r_s\\parallel(R_F+R_{D2}),\n\\]\n\n\\[\nR_{\\text{out},0}=R_{D2}\\parallel(R_F+r_s).\n\\]\n\nShunt-shunt feedback divides both by \\(1+T\\):\n\n\\[\n\\boxed{\nR_{\\text{in,cl}}\n=\\frac{r_s\\parallel(R_F+R_{D2})}{1+T}\n=\\frac{r_s(R_F+R_{D2})}{S+A_T}\n}\n\\]\n\nand\n\n\\[\n\\boxed{\nR_{\\text{out,cl}}\n=\\frac{R_{D2}\\parallel(R_F+r_s)}{1+T}\n=\\frac{R_{D2}(R_F+r_s)}{S+A_T}\n}.\n\\]\n\nThus a large loop gain produces both a low input resistance, desirable for a current input, and a low output resistance, desirable for a voltage output.\n\n---\n\n## Practical considerations\n\n- If body effect in \\(M_1\\) is included, use \\(r_s=1/(g_{m1}+g_{mb1})\\).\n- Finite \\(r_o\\), source resistance of \\(I_{\\text{in}}\\), and an external output load modify the effective values of \\(R_{D1}\\), \\(R_{D2}\\), and \\(r_s\\).\n- Nodes \\(X\\) and \\(V_{\\text{out}}\\) are both high-impedance nodes, so the loop has at least two significant poles. For large \\(T\\), phase margin and frequency compensation must be checked.\n- At dc, \\(R_F\\) also carries bias current; all devices must remain in saturation around the chosen operating point.",
        "format": "markdown",
        "sha256": "2d68a72256a54033819b724cf16d4dc198544651b9ef332d03c01d7ade2e7651"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from Vout to the input node, forming a transimpedance amplifier. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1958,
        "output_tokens": 38207,
        "total_tokens": 40165,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1958,
        "output_tokens": 38207,
        "total_tokens": 40165,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming low-frequency small-signal operation, \\(V_{DD}\\) and \\(V_b\\) are ac grounds, the MOSFET gates draw no current, and the devices are biased in saturation. Let\n\n- \\(v_s\\): voltage at the source of \\(M_1\\)/input summing node,\n- \\(v_x\\): voltage at node \\(X\\),\n- \\(v_o=V_{\\text{out}}\\),\n- \\(g_{m2}\\): transconductance of \\(M_2\\).\n\nAlso define the resistance looking into the source of \\(M_1\\):\n\n\\[\nr_{s1}\\simeq \\frac{1}{g_{m1}+g_{mb1}}\n\\approx \\frac{1}{g_{m1}}\n\\]\n\nif body effect and channel-length modulation are neglected. With finite \\(r_{o1}\\),\n\n\\[\nr_{s1}=\\frac{r_{o1}+R_{D1}}\n{1+(g_{m1}+g_{mb1})r_{o1}}.\n\\]\n\nLet \\(R_2=R_{D2}\\) for the ideal case, or  \n\\(R_2=R_{D2}\\parallel r_{o2}\\parallel R_L\\) if output resistance/load is included.\n\n---\n\n## 1. Circuit type and feedback polarity\n\n- \\(M_1\\) is a common-gate stage: its gate is at ac ground and the input current enters its source.\n- \\(M_2\\) is a common-source stage with its drain at the output.\n- \\(R_F\\) connects the output voltage back to the input node as a current.\n\nThus this is a **shunt-shunt feedback transimpedance amplifier**: current-input, voltage-output.\n\nPolarity:\n\n\\[\nv_s\\uparrow \\Rightarrow v_x\\uparrow\n\\Rightarrow v_o\\downarrow .\n\\]\n\nA negative \\(v_o\\) draws current away from the input node through \\(R_F\\), opposing the injected \\(I_{\\text{in}}\\). Hence the feedback is negative.\n\n---\n\n## 2. Loop gain / return ratio\n\nSet \\(I_{\\text{in}}=0\\) and break the loop at node \\(X\\), i.e. at the gate of \\(M_2\\). Apply a test voltage \\(v_t\\) to the gate side of the break.\n\nThe output sees \\(R_2\\) in parallel with the path \\(R_F+r_{s1}\\):\n\n\\[\nR_p=R_2\\parallel(R_F+r_{s1}).\n\\]\n\nTherefore,\n\n\\[\nv_o=-g_{m2}v_t R_p.\n\\]\n\nThe feedback current through \\(R_F\\) is\n\n\\[\ni_{RF}=\\frac{v_o}{R_F+r_{s1}},\n\\]\n\nand this current is transferred by \\(M_1\\) into \\(R_{D1}\\), generating the returned voltage\n\n\\[\nv_r=i_{RF}R_{D1}.\n\\]\n\nHence\n\n\\[\n\\frac{v_r}{v_t}\n=\n-g_{m2}R_{D1}\n\\frac{R_2}{R_2+R_F+r_{s1}}.\n\\]\n\nWriting the return ratio as \\(v_r/v_t=-T\\),\n\n\\[\n\\boxed{\nT=\n\\frac{g_{m2}R_{D1}R_2}\n{R_2+R_F+r_{s1}}\n}\n\\]\n\nis the positive loop-gain magnitude; the minus sign indicates negative feedback.\n\nFor \\(R_2=R_{D2}\\), \\(r_{s1}=1/g_{m1}\\), and \\(g_{mb1}=0\\),\n\n\\[\n\\boxed{\nT=\n\\frac{g_{m2}R_{D1}R_{D2}}\n{R_F+R_{D2}+1/g_{m1}}\n=\n\\frac{g_{m1}g_{m2}R_{D1}R_{D2}}\n{1+g_{m1}(R_F+R_{D2})}\n}\n\\]\n\nIf \\(R_F\\gg R_{D2}+1/g_{m1}\\),\n\n\\[\nT\\approx \\frac{g_{m2}R_{D1}R_{D2}}{R_F}.\n\\]\n\nThis agrees with the usual feedback formulation  \n\\(A_{z,\\text{OL}}\\approx -g_{m2}R_{D1}R_{D2}\\), \\(\\beta\\approx 1/R_F\\).\n\n---\n\n## 3. Exact closed-loop transimpedance\n\nLet \\(g_s=1/r_{s1}\\); for the simplest case \\(g_s=g_{m1}\\). The small-signal equations are\n\n\\[\nv_x=g_sR_{D1}v_s,\n\\]\n\n\\[\nI_{\\text{in}}\n=g_sv_s+\\frac{v_s-v_o}{R_F},\n\\]\n\n\\[\n\\frac{v_o}{R_2}+g_{m2}v_x+\\frac{v_o-v_s}{R_F}=0.\n\\]\n\nDefine\n\n\\[\nD=1+g_s(R_2+R_F)+g_sg_{m2}R_{D1}R_2.\n\\]\n\nSolving gives\n\n\\[\n\\boxed{\n\\frac{v_s}{I_{\\text{in}}}\n=\\frac{R_2+R_F}{D}\n}\n\\]\n\nand\n\n\\[\n\\boxed{\nZ_{T,\\text{CL}}\n\\equiv\n\\frac{V_{\\text{out}}}{I_{\\text{in}}}\n=\n\\frac{R_2\\left(1-g_sg_{m2}R_{D1}R_F\\right)}{D}\n}\n\\]\n\nwith \\(I_{\\text{in}}\\) defined as flowing upward into the input node as drawn.\n\nSince\n\n\\[\nD=\\left[1+g_s(R_2+R_F)\\right](1+T),\n\\]\n\nthe gain can also be written as\n\n\\[\n\\boxed{\nZ_{T,\\text{CL}}\n=\n-\\frac{R_FT}{1+T}\n+\n\\frac{R_2}\n{\\left[1+g_s(R_2+R_F)\\right](1+T)}\n}\n\\]\n\nThe second term is the direct feedforward path from the input node through \\(R_F\\) and \\(R_2\\); it is usually small. Therefore,\n\n\\[\nZ_{T,\\text{CL}}\\approx\n-\\frac{R_FT}{1+T},\n\\]\n\nand for \\(T\\gg1\\),\n\n\\[\n\\boxed{\n\\frac{V_{\\text{out}}}{I_{\\text{in}}}\\approx -R_F\n}\n\\]\n\nso the input node is approximately a virtual ground.\n\n---\n\n## 4. Input and output resistances\n\nBecause this is shunt-shunt feedback, both input and output resistances are reduced by approximately \\(1+T\\).\n\n### Input resistance\n\n\\[\n\\boxed{\nR_{\\text{in,CL}}\n=\n\\frac{R_2+R_F}{D}\n=\n\\frac{r_{s1}\\parallel(R_F+R_2)}{1+T}\n}\n\\]\n\n### Output resistance\n\nWith \\(I_{\\text{in}}=0\\) and a test source applied at the output,\n\n\\[\n\\boxed{\nR_{\\text{out,CL}}\n=\n\\frac{R_2\\parallel(R_F+r_{s1})}{1+T}\n}\n\\]\n\nFor large loop gain, both become very small.\n\n---\n\n### Summary\n\n- The circuit is a two-stage CMOS **transimpedance amplifier** with **shunt-shunt negative feedback**.\n- The low-frequency loop gain is\n\n\\[\nT=\\frac{g_{m2}R_{D1}R_{D2}}\n{R_F+R_{D2}+1/g_{m1}}\n\\]\n\nunder the usual \\(\\lambda=\\gamma=0\\) approximation.\n- For \\(T\\gg1\\),\n\n\\[\n\\frac{V_{\\text{out}}}{I_{\\text{in}}}\\approx -R_F.\n\\]\n\n- Feedback lowers both \\(R_{\\text{in}}\\) and \\(R_{\\text{out}}\\) by approximately \\(1+T\\).\n- A high-frequency design must still check phase margin, since nodes \\(X\\) and \\(V_{\\text{out}}\\) are both potentially high-impedance poles.",
        "format": "markdown",
        "sha256": "623ad927134fc0eb6e83e42e7d0f4807a0cc14af9bcc4113012f198e46d447d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as output-to-input feedback forming a transimpedance amplifier. It also correctly identifies the feedback as negative, satisfying the full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1856,
        "input_tokens": 1958,
        "output_tokens": 39605,
        "total_tokens": 41563,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38029,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1856,
        "input_tokens": 1958,
        "output_tokens": 39605,
        "total_tokens": 41563,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38029,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume a low-frequency small-signal analysis around the dc bias point, with \\(V_{DD}\\) and \\(V_b\\) at ac ground. Let\n\n\\[\nR_1=R_{D1},\\qquad R_2=R_{D2},\\qquad\ng_2=g_{m2},\n\\]\n\nand let \\(g_1=g_{m1}+g_{mb1}\\) be the effective source-control conductance of \\(M_1\\); use \\(g_1=g_{m1}\\) if body effect is neglected. Channel-length modulation is initially neglected.\n\n## 1. Circuit function and feedback polarity\n\n- \\(M_1\\) is a common-gate stage: its source is the input summing node and its drain is \\(X\\).\n- \\(M_2\\) is a common-source stage: \\(X\\) drives its gate and the drain is the output.\n- \\(R_F\\) returns a current proportional to the output voltage to the input node.\n\nThus this is a **shunt-shunt feedback transimpedance amplifier**:\n\n\\[\n\\boxed{\\text{current input, voltage output}}\n\\]\n\nA positive incremental \\(I_{\\rm in}\\) raises the source of \\(M_1\\), which raises \\(v_X\\), increasing the current of \\(M_2\\) and lowering \\(v_{\\rm out}\\). The resulting current through \\(R_F\\) opposes the original increase at the input node, so the feedback is negative. The output polarity is therefore inverted:\n\n\\[\nI_{\\rm in}>0\\quad\\Rightarrow\\quad v_{\\rm out}<0.\n\\]\n\n---\n\n## 2. Loop gain\n\nLet \\(v_s\\), \\(v_X\\), and \\(v_o\\) denote the input-node, node-\\(X\\), and output voltages. Node \\(X\\) is a convenient place to break the loop because the gate of \\(M_2\\) draws no low-frequency current.\n\nSet \\(I_{\\rm in}=0\\), break at \\(X\\), and apply a test voltage \\(v_t\\) to the gate of \\(M_2\\).\n\nThe source of \\(M_1\\) presents approximately\n\n\\[\nr_s=\\frac{1}{g_1}.\n\\]\n\nHence the load seen at the output of \\(M_2\\) during the loop-gain calculation is\n\n\\[\nR_L=R_2\\parallel\\left(R_F+r_s\\right),\n\\]\n\nand\n\n\\[\n\\frac{v_o}{v_t}=-g_2R_L .\n\\]\n\nThe current through the \\(R_F+r_s\\) path produces a return voltage at the drain of \\(M_1\\). Since a common-gate stage has approximately unity current gain,\n\n\\[\n\\frac{v_X}{v_t}\n=\n-g_2R_L\\frac{R_1}{R_F+r_s}\n=\n-\\frac{g_2R_1R_2}{R_2+R_F+1/g_1}.\n\\]\n\nDefine the positive loop-gain magnitude \\(T=-v_X/v_t\\):\n\n\\[\n\\boxed{\nT=\n\\frac{g_2R_{D1}R_{D2}}\n{R_{D2}+R_F+1/g_1}\n=\n\\frac{g_1g_2R_{D1}R_{D2}}\n{1+g_1(R_{D2}+R_F)}\n}\n\\]\n\nThe negative sign in the return ratio is what gives negative feedback; the closed-loop denominator contains \\(1+T\\).\n\nIf \\(1/g_1\\ll R_F+R_{D2}\\),\n\n\\[\nT\\simeq \\frac{g_{m2}R_{D1}R_{D2}}{R_F+R_{D2}}.\n\\]\n\nFor \\(R_F\\gg R_{D2}\\),\n\n\\[\n\\boxed{T\\simeq \\frac{g_{m2}R_{D1}R_{D2}}{R_F}}.\n\\]\n\nThis is the usual result: the open-loop transresistance is approximately \\(g_{m2}R_{D1}R_{D2}\\), while the feedback factor is approximately \\(1/R_F\\).\n\n---\n\n## 3. Exact closed-loop small-signal equations\n\nWith the loop closed, the node equations are\n\n\\[\nv_X=g_1R_1v_s,\n\\]\n\n\\[\n\\frac{v_o}{R_2}+g_2v_X+\\frac{v_o-v_s}{R_F}=0,\n\\]\n\n\\[\nI_{\\rm in}=g_1v_s+\\frac{v_s-v_o}{R_F}.\n\\]\n\nDefine\n\n\\[\nD_0=1+g_1(R_2+R_F),\n\\]\n\n\\[\nA_0=g_1g_2R_1R_2,\\qquad T=\\frac{A_0}{D_0},\n\\]\n\nand\n\n\\[\nD=D_0+A_0=D_0(1+T).\n\\]\n\nSolving gives the input resistance\n\n\\[\n\\boxed{\nR_{\\rm in}=\\frac{v_s}{I_{\\rm in}}\n=\\frac{R_2+R_F}{D}\n=\\frac{(1/g_1)\\parallel(R_F+R_2)}{1+T}\n}\n\\]\n\nand the closed-loop transimpedance\n\n\\[\n\\boxed{\nZ_T\\equiv\\frac{v_o}{I_{\\rm in}}\n=\n\\frac{R_2\\left(1-g_1g_2R_1R_F\\right)}{D}\n=\n\\frac{R_2-A_0R_F}{D}\n}\n\\]\n\nor, in feedback form,\n\n\\[\n\\boxed{\nZ_T=\n-R_F\\frac{T}{1+T}\n+\n\\frac{R_2}{D_0(1+T)}\n}.\n\\]\n\nThe second term is the small direct feedthrough through \\(R_F\\) and \\(R_{D2}\\). When the forward gain is large it is negligible, giving\n\n\\[\nZ_T\\simeq -R_F\\frac{T}{1+T}.\n\\]\n\nFor \\(T\\gg1\\), the input node becomes nearly a virtual ground:\n\n\\[\nI_{\\rm in}\\simeq-\\frac{v_o}{R_F},\n\\]\n\nand therefore\n\n\\[\n\\boxed{\\frac{v_o}{I_{\\rm in}}\\simeq -R_F}.\n\\]\n\nThus the circuit is a transimpedance amplifier whose gain is set primarily by \\(R_F\\), not by transistor parameters.\n\n---\n\n## 4. Output resistance\n\nWith \\(I_{\\rm in}=0\\), the exact output resistance is\n\n\\[\n\\boxed{\nR_{\\rm out}\n=\n\\frac{R_2(1+g_1R_F)}{D}\n=\n\\frac{R_2\\parallel(R_F+1/g_1)}{1+T}\n}.\n\\]\n\nBoth input and output resistances are reduced by approximately \\(1+T\\), as expected for shunt-shunt feedback.\n\n---\n\n## 5. Practical considerations\n\n- Body effect enters by replacing \\(g_{m1}\\) with \\(g_{m1}+g_{mb1}\\).\n- For finite \\(r_{o2}\\), replace \\(R_2\\) by \\(R_{D2}\\parallel r_{o2}\\).\n- With finite \\(r_{o1}\\), the source resistance of \\(M_1\\) becomes approximately\n\n\\[\nr_s=\n\\frac{r_{o1}+R_{D1}}\n{1+(g_{m1}+g_{mb1})r_{o1}},\n\\]\n\nand the loop gain becomes\n\n\\[\nT\\simeq\n\\frac{g_{m2}R_{D1}(R_{D2}\\parallel r_{o2})}\n{R_{D2}\\parallel r_{o2}+R_F+r_s}.\n\\]\n\n- At high frequency, parasitic capacitances at nodes \\(X\\) and \\(V_{\\rm out}\\), especially Miller-multiplied \\(C_{gd2}\\), create at least two loop poles. Adequate phase margin or frequency compensation is therefore required; it cannot be determined from the dc schematic alone.\n\nIn summary: the figure is a two-stage negative-feedback TIA with loop gain \\(T\\), ideal transimpedance \\(-R_F\\), and reduced input/output resistances by approximately \\(1+T\\).",
        "format": "markdown",
        "sha256": "9ce10d7d8b829ba786dd198be9c7d07c9eddc0b390688b332e4916c497a24a0b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from the output to the input, forming a transimpedance amplifier. It also correctly describes the feedback as negative and the high-loop-gain transimpedance as approximately −RF.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1856,
        "input_tokens": 1958,
        "output_tokens": 39829,
        "total_tokens": 41787,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38246,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1856,
        "input_tokens": 1958,
        "output_tokens": 39829,
        "total_tokens": 41787,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38246,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Below is a low-frequency small-signal analysis. Let\n\n- \\(x\\): the input node: source of \\(M_1\\), gate of \\(M_2\\), \\(I_{in}\\), and the lower bias sink.\n- \\(o\\): the output node \\(V_{out}\\): drains of \\(M_1\\) and \\(M_2\\), and the upper current source \\(I_1\\).\n- \\(v_x,\\,v_o\\): small-signal voltages at \\(x,o\\).\n- \\(i_{in}\\): small-signal current injected into \\(x\\) in the direction shown.\n\nAssume \\(M_1\\) is NMOS, \\(M_2\\) is PMOS, both in saturation, \\(V_{DD}\\) and \\(V_b\\) are ac ground, and the bias current sources are ideal.\n\n---\n\n## 1. DC bias and saturation conditions\n\nLet the unlabeled lower current sink be \\(I_B\\). With the arrow directions shown,\n\n\\[\nI_{D1}+I_{in,Q}=I_B ,\n\\]\n\nso\n\n\\[\nI_{D1}=I_B-I_{in,Q}.\n\\]\n\nAt the output node,\n\n\\[\nI_{D1}=I_1+|I_{D2}|,\n\\]\n\nhence\n\n\\[\n|I_{D2}|=I_B-I_{in,Q}-I_1.\n\\]\n\nThus \\(I_B>I_1+I_{in,Q}\\) is needed to keep \\(M_2\\) conducting.\n\nApproximate saturation requirements:\n\n\\[\nV_b-V_x>V_{Tn}, \\qquad V_{out}\\gtrsim V_b-V_{Tn},\n\\]\n\nfor \\(M_1\\), including body-effect-modified \\(V_{Tn}\\) if the body is at ground, and\n\n\\[\nV_{DD}-V_x>|V_{Tp}|, \\qquad V_{out}\\lesssim V_x+|V_{Tp}|,\n\\]\n\nfor PMOS \\(M_2\\).\n\n---\n\n## 2. Small-signal model\n\nDefine\n\n\\[\ng_{o1}=\\frac1{r_{o1}},\\qquad g_{o2}=\\frac1{r_{o2}},\n\\]\n\n\\[\nG \\equiv g_{m1}+g_{mb1}+g_{o1},\n\\]\n\nwhere \\(g_{mb1}\\) is the body-effect transconductance of \\(M_1\\). If body effect is neglected, set \\(g_{mb1}=0\\). Let \\(g_{m2}>0\\) denote the magnitude of the PMOS transconductance. Also define\n\n\\[\nG_o \\equiv g_{o1}+g_{o2},\n\\]\n\n\\[\n\\Delta \\equiv Gg_{o2}+g_{m2}g_{o1}.\n\\]\n\nFor \\(M_1\\), the small-signal drain current leaving the output node into \\(M_1\\) is\n\n\\[\ni_{d1}=-Gv_x+g_{o1}v_o.\n\\]\n\nFor \\(M_2\\), using the signed PMOS drain current taken positive from drain to source,\n\n\\[\ni_{d2}=g_{m2}v_x+g_{o2}v_o.\n\\]\n\nAt the input node, since the ideal bias sink and the MOS gates draw no small-signal current,\n\n\\[\ni_{in}=-i_{d1}=Gv_x-g_{o1}v_o.\n\\]\n\nAt the output node, with \\(i_t\\) defined as a test current injected into the output node,\n\n\\[\ni_t=i_{d1}+i_{d2}\n=(g_{m2}-G)v_x+(g_{o1}+g_{o2})v_o.\n\\]\n\nThus\n\n\\[\n\\boxed{\n\\begin{aligned}\ni_{in}&=Gv_x-g_{o1}v_o,\\\\\ni_t&=(g_{m2}-G)v_x+G_ov_o.\n\\end{aligned}}\n\\]\n\nEquivalently,\n\n\\[\n\\boxed{\n\\begin{bmatrix}\nv_x\\\\[2mm]v_o\n\\end{bmatrix}\n=\n\\frac{1}{\\Delta}\n\\begin{bmatrix}\nG_o & g_{o1}\\\\\nG-g_{m2} & G\n\\end{bmatrix}\n\\begin{bmatrix}\ni_{in}\\\\[2mm]i_t\n\\end{bmatrix}.}\n\\]\n\n---\n\n## 3. Unloaded results\n\nFor no external load at the output, set \\(i_t=0\\).\n\n### Input resistance\n\n\\[\n\\boxed{\nR_{in}=\\frac{v_x}{i_{in}}\n=\\frac{g_{o1}+g_{o2}}{Gg_{o2}+g_{m2}g_{o1}}\n=\\frac{G_o}{\\Delta}.}\n\\]\n\n### Internal voltage gain from \\(v_x\\) to \\(V_{out}\\)\n\n\\[\n\\boxed{\n\\frac{v_o}{v_x}\n=\n\\frac{G-g_{m2}}{g_{o1}+g_{o2}}\n=\n\\frac{G-g_{m2}}{G_o}.}\n\\]\n\n### Transimpedance \\(V_{out}/I_{in}\\)\n\n\\[\n\\boxed{\nZ_T\\equiv \\frac{v_o}{i_{in}}\n=\n\\frac{G-g_{m2}}{Gg_{o2}+g_{m2}g_{o1}}\n=\n\\frac{G-g_{m2}}{\\Delta}.}\n\\]\n\n---\n\n## 4. Output resistance and output equivalent\n\nWith the input signal source set to zero, \\(i_{in}=0\\), and a test current \\(i_t\\) applied at the output:\n\n\\[\n\\boxed{\nR_{out}=\\left.\\frac{v_o}{i_t}\\right|_{i_{in}=0}\n=\n\\frac{G}{\\Delta}.}\n\\]\n\nThe Thevenin voltage at the output due to \\(i_{in}\\) is\n\n\\[\nV_{TH}=Z_T\\,i_{in}\n=\n\\frac{G-g_{m2}}{\\Delta}i_{in},\n\\]\n\nso the Norton short-circuit current is\n\n\\[\n\\boxed{\ni_{SC}=\\frac{V_{TH}}{R_{out}}\n=\n\\frac{G-g_{m2}}{G}i_{in}.}\n\\]\n\nIf a load \\(R_L\\) is connected from \\(V_{out}\\) to ac ground, then\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}\n=\n\\frac{G-g_{m2}}{\\Delta+G/R_L}\n=\n\\left(\\frac{G-g_{m2}}{\\Delta}\\right)\n\\frac{R_L}{R_L+R_{out}}.}\n\\]\n\nThe loaded input resistance is\n\n\\[\n\\boxed{\nR_{in,L}\n=\n\\frac{G_o+1/R_L}{\\Delta+G/R_L}.}\n\\]\n\n---\n\n## 5. Useful approximations\n\nUsually \\(g_m\\gg g_o\\). Let\n\n\\[\ng_1\\equiv g_{m1}+g_{mb1}\\approx G.\n\\]\n\nThen\n\n\\[\n\\Delta\\approx g_1g_{o2}+g_{m2}g_{o1}.\n\\]\n\nSo\n\n\\[\n\\boxed{\nR_{in}\\approx\n\\frac{g_{o1}+g_{o2}}\n{g_1g_{o2}+g_{m2}g_{o1}},}\n\\]\n\n\\[\n\\boxed{\n\\frac{v_o}{v_x}\\approx\n\\frac{g_1-g_{m2}}{g_{o1}+g_{o2}},}\n\\]\n\n\\[\n\\boxed{\nZ_T\\approx\n\\frac{g_1-g_{m2}}\n{g_1g_{o2}+g_{m2}g_{o1}},}\n\\]\n\n\\[\n\\boxed{\nR_{out}\\approx\n\\frac{g_1}\n{g_1g_{o2}+g_{m2}g_{o1}}.}\n\\]\n\nIf \\(r_{o1}=r_{o2}=r_o\\), i.e. \\(g_{o1}=g_{o2}=1/r_o\\),\n\n\\[\n\\boxed{\nR_{in}\\approx \\frac{2}{g_1+g_{m2}},}\n\\]\n\n\\[\n\\boxed{\n\\frac{v_o}{v_x}\\approx\n\\frac{r_o}{2}(g_1-g_{m2}),}\n\\]\n\n\\[\n\\boxed{\nZ_T\\approx\nr_o\\,\\frac{g_1-g_{m2}}{g_1+g_{m2}},}\n\\]\n\n\\[\n\\boxed{\nR_{out}\\approx\nr_o\\,\\frac{g_1}{g_1+g_{m2}}.}\n\\]\n\n---\n\n## 6. Important special cases\n\n### 1. \\(g_{m2}=0\\): M2 gate ac-grounded / current-source load\n\nThen\n\n\\[\nZ_T=\\frac{1}{g_{o2}}=r_{o2},\n\\]\n\nso the circuit behaves like a common-gate transimpedance stage: low input resistance and large positive transimpedance set mainly by the PMOS output resistance.\n\n---\n\n### 2. \\(g_{m2}\\approx G\\approx g_{m1}+g_{mb1}\\): current cancellation\n\nThe drain-current changes of \\(M_1\\) and \\(M_2\\) nearly cancel at the output. Then\n\n\\[\nZ_T\\approx 0,\\qquad \n\\frac{v_o}{v_x}\\approx 0,\\qquad\ni_{SC}\\approx 0.\n\\]\n\nAlso\n\n\\[\nR_{in}\\approx \\frac{1}{G},\n\\]\n\nand\n\n\\[\nR_{out}\\approx \\frac{1}{g_{o1}+g_{o2}}\n=r_{o1}\\parallel r_{o2}.\n\\]\n\nThus \\(V_{out}\\) becomes almost insensitive to \\(I_{in}\\); the circuit acts more like a current-mode cancellation/buffer cell than a voltage-output transimpedance amplifier.\n\n---\n\n### 3. \\(g_{m2}>G\\)\n\nThe sign of \\(Z_T\\), \\(v_o/v_x\\), and \\(i_{SC}\\) reverses. The output response is then dominated by the PMOS common-source action rather than by the NMOS common-gate path.\n\n---\n\n## 7. If channel-length modulation is neglected\n\nIf \\(g_{o1}=g_{o2}=0\\), then \\(\\Delta=0\\), and the small-signal equations reduce to\n\n\\[\ni_{in}=(g_{m1}+g_{mb1})v_x,\n\\]\n\n\\[\n0=(g_{m2}-g_{m1}-g_{mb1})v_x.\n\\]\n\nFor nonzero \\(i_{in}\\), a finite linear solution requires\n\n\\[\n\\boxed{g_{m2}=g_{m1}+g_{mb1}.}\n\\]\n\nThen\n\n\\[\nR_{in}=\\frac{1}{g_{m1}+g_{mb1}},\n\\]\n\nbut the open-circuit \\(V_{out}\\) is not defined by the ideal \\(r_o\\to\\infty\\) model; it is floating and must be set by finite \\(r_o\\), a load, or compliance limits. If \\(g_{m2}\\neq g_{m1}+g_{mb1}\\), the ideal model has no finite output equilibrium; in a real circuit the output node moves until one device leaves saturation or channel-length modulation resolves the current imbalance.\n\n---\n\nIf the upper current source has finite small-signal output conductance, add that conductance to \\(g_{o2}\\) in \\(G_o\\) and in the \\(g_{o2}\\) term of \\(\\Delta\\).",
        "format": "markdown",
        "sha256": "5713202bcfb2910d910de2d1e254fc69db2c9bd7f75ba6fe380130df229afb8a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer swaps M2’s connections: it places M2’s gate at the input and its drain at the output, whereas M2 is driven by Vout and feeds back to the input node. Its analysis therefore misses the circuit’s defining feedback loop and derives results for a different topology.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1825,
        "output_tokens": 41882,
        "total_tokens": 43707,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39625,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1825,
        "output_tokens": 41882,
        "total_tokens": 43707,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39625,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure is under-specified—there are no device dimensions, bias values, or transistor model parameters—so the most useful result is a symbolic low-frequency analysis.\n\nLet\n\n- \\(X\\) be the lower node: gate of \\(M_2\\), source of \\(M_1\\);\n- \\(V_o=V_{\\text{out}}\\);\n- \\(I_B\\) be the dc value of the unlabeled downward current source at \\(X\\);\n- \\(M_1\\) be the NMOS carrying current \\(J_1\\) from \\(V_o\\) to \\(X\\);\n- \\(M_2\\) be the PMOS carrying current \\(J_2\\) from \\(V_{DD}\\) to \\(V_o\\).\n\nAssume \\(V_{DD}\\) and \\(V_b\\) are ac grounds.\n\n## 1. DC operation\n\nKCL at \\(X\\) and \\(V_o\\) gives\n\n\\[\nJ_1+I_{\\text{in}}=I_B,\n\\qquad\nJ_2+I_1=J_1,\n\\]\n\nhence\n\n\\[\n\\boxed{J_1=I_B-I_{\\text{in}}},\\qquad\n\\boxed{J_2=I_B-I_1-I_{\\text{in}}}.\n\\]\n\nThus an increase in \\(I_{\\text{in}}\\) reduces both transistor currents by the same amount. The bias must satisfy\n\n\\[\nI_B-I_{\\text{in}}>0,\\qquad\nI_B-I_1-I_{\\text{in}}>0.\n\\]\n\nThese quiescent currents set \\(g_m\\), \\(g_{mb}\\), and \\(r_o\\). For example, in a square-law model,\n\n\\[\ng_m\\simeq \\frac{2J}{V_{OV}}=\\sqrt{2\\beta J},\n\\qquad\ng_o\\simeq \\lambda J .\n\\]\n\nIf the lower sink is intended to be \\(2I_1\\), then \\(J_1=2I_1-I_{\\text{in}}\\) and \\(J_2=I_1-I_{\\text{in}}\\).\n\nThe overdrives are\n\n\\[\nV_{OV1}=V_b-V_X-V_{TN},\\qquad\nV_{OV2}=V_{DD}-V_X-|V_{TP}|,\n\\]\n\nso \\(V_b\\) fixes their difference:\n\n\\[\nV_{OV1}-V_{OV2}=V_b-V_{DD}-V_{TN}+|V_{TP}|.\n\\]\n\nFor both devices to remain saturated,\n\n\\[\n\\boxed{V_b-V_{TN}\\le V_o\\le V_X+|V_{TP}|},\n\\]\n\nalong with the compliance voltages of the two current sources.\n\n---\n\n## 2. Small-signal transimpedance\n\nDefine\n\n\\[\ng_{o1}=\\frac1{r_{o1}},\\qquad\ng_{o2}=\\frac1{r_{o2}},\n\\]\n\n\\[\nA=g_{m1}+g_{mb1}+g_{o1},\n\\]\n\nwhere \\(g_{mb1}\\) can be set to zero if the body of \\(M_1\\) is tied to its source. Let \\(g_{m2}>0\\) denote the magnitude of the PMOS transconductance.\n\nFor small changes \\(v_x\\) and \\(v_o\\),\n\n\\[\n\\delta J_1=g_{o1}v_o-Av_x,\n\\]\n\n\\[\n\\delta J_2=-g_{m2}v_x-g_{o2}v_o.\n\\]\n\nLet \\(i_{\\text{in}}\\) be the signal current and let \\(i_1\\) be a small-signal or test current associated with the upper source. For ideal dc current sources,\n\n\\[\n\\delta J_1=-i_{\\text{in}},\n\\qquad\n\\delta J_2+i_1=\\delta J_1 .\n\\]\n\nTherefore\n\n\\[\nA v_x-g_{o1}v_o=i_{\\text{in}},\n\\]\n\n\\[\ng_{m2}v_x+g_{o2}v_o=i_{\\text{in}}+i_1.\n\\]\n\nWith\n\n\\[\nD=A g_{o2}+g_{o1}g_{m2},\n\\]\n\nthe solution is\n\n\\[\n\\boxed{\nv_o=\n\\frac{(A-g_{m2})\\,i_{\\text{in}}+A\\,i_1}{D}\n}\n\\]\n\nand\n\n\\[\nv_x=\n\\frac{(g_{o1}+g_{o2})\\,i_{\\text{in}}+g_{o1}i_1}{D}.\n\\]\n\nFor a dc-only upper source, \\(i_1=0\\), giving the current-to-voltage gain\n\n\\[\n\\boxed{\n\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n=\n\\frac{g_{m1}+g_{mb1}+g_{o1}-g_{m2}}\n{g_{m2}g_{o1}+g_{o2}(g_{m1}+g_{mb1}+g_{o1})}\n}\n\\]\n\nand the input impedance\n\n\\[\n\\boxed{\nZ_{\\text{in}}=\\frac{v_x}{i_{\\text{in}}}\n=\n\\frac{g_{o1}+g_{o2}}{D}\n}.\n\\]\n\nUsing the upper source as a test current gives the output resistance\n\n\\[\n\\boxed{\nR_{\\text{out}}=\\left.\\frac{v_o}{i_1}\\right|_{i_{\\text{in}}=0}\n=\\frac{A}{D}\n=\n\\frac{1}{g_{o2}+g_{m2}g_{o1}/A}\n}.\n\\]\n\nSince \\(D>0\\), the low-frequency circuit is not unstable; a large \\(g_{m2}\\), however, gives a negative transimpedance.\n\n### Equal-\\(r_o\\), negligible body-effect approximation\n\nIf \\(g_{o1}=g_{o2}=g_o\\) and \\(g_{mb1}=0\\),\n\n\\[\n\\frac{v_o}{i_{\\text{in}}}\n=\n\\frac{g_{m1}+g_o-g_{m2}}\n{g_o(g_{m1}+g_{m2}+g_o)}\n\\approx\n\\frac{g_{m1}-g_{m2}}\n{g_o(g_{m1}+g_{m2})},\n\\]\n\n\\[\nZ_{\\text{in}}\\approx\\frac{2}{g_{m1}+g_{m2}},\n\\qquad\nR_{\\text{out}}\\approx\n\\frac{g_{m1}}{g_o(g_{m1}+g_{m2})}.\n\\]\n\nFor matched \\(g_{m1}=g_{m2}=g_m\\gg g_o\\),\n\n\\[\n\\frac{v_o}{i_{\\text{in}}}\\approx\\frac{1}{2g_m},\\qquad\nZ_{\\text{in}}\\approx\\frac{1}{g_m},\\qquad\nR_{\\text{out}}\\approx\\frac{r_o}{2}.\n\\]\n\nIf \\(g_{m2}=A=g_{m1}+g_{mb1}+g_{o1}\\), then \\(v_o/i_{\\text{in}}=0\\): the current changes in \\(M_1\\) and \\(M_2\\) cancel exactly at the output.\n\n---\n\n## 3. Physical interpretation\n\nA positive \\(i_{\\text{in}}\\) forces \\(v_x\\) upward, reducing \\(M_1\\)'s \\(V_{GS}\\). This also reduces \\(M_2\\)'s \\(V_{SG}\\), so both device currents decrease.\n\n- If \\(g_{m2}<A\\), \\(M_2\\)'s current reduction is too small, and \\(v_o\\) rises.\n- If \\(g_{m2}>A\\), \\(M_2\\)'s current reduction is too large, and \\(v_o\\) falls.\n- If \\(g_{m2}=A\\), the changes cancel and \\(v_o\\) is unchanged to first order.\n\nThere is a local negative-feedback path: a rise in \\(v_o\\) increases \\(M_1\\)'s current through \\(r_{o1}\\), which raises \\(v_x\\), thereby reducing the PMOS pull-up current and opposing the original rise in \\(v_o\\). Thus the circuit is a complementary common-gate/common-source, shunt-shunt transresistance stage.\n\n---\n\n## 4. Important ideal-model limitation\n\nIf channel-length modulation is neglected (\\(g_{o1}=g_{o2}=0\\)) and all current sources and the output load are ideal, then \\(D=0\\). In that model the output node has no small-signal conductance and \\(v_o\\) is not determined.\n\nIndeed, with \\(\\lambda=0\\) and both transistors saturated,\n\n\\[\nJ_1=\\frac{\\beta_1}{2}(V_b-V_X-V_{TN})^2,\n\\qquad\nJ_2=\\frac{\\beta_2}{2}(V_{DD}-V_X-|V_{TP}|)^2,\n\\]\n\nso\n\n\\[\nV_b-V_{TN}-\\sqrt{\\frac{2J_1}{\\beta_1}}\n=\nV_{DD}-|V_{TP}|-\\sqrt{\\frac{2J_2}{\\beta_2}}.\n\\]\n\nNeither equation contains \\(V_o\\); they impose a constraint on the bias currents rather than determining \\(V_o\\). In a real circuit, channel-length modulation, finite current-source output resistance, an output load, or one transistor entering triode region sets the output voltage.\n\nIf the lower current sink has small-signal conductance \\(G_X\\) and the upper source/output load has shunt conductance \\(G_Y\\), use\n\n\\[\nD_G=(A+G_X)(g_{o2}+G_Y)+g_{o1}(g_{m2}+G_X),\n\\]\n\n\\[\n\\boxed{\nv_o=\n\\frac{(A-g_{m2})i_{\\text{in}}+(A+G_X)i_1}{D_G}\n}.\n\\]\n\nThis remains finite even when transistor \\(g_o\\to0\\), provided \\(G_Y\\neq0\\).\n\nIf \\(V_b\\) is itself an ac signal while the body of \\(M_1\\) is grounded, the ideal-source result becomes\n\n\\[\nv_o=\n\\frac{(A-g_{m2})i_{\\text{in}}-g_{m1}g_{m2}v_b+A i_1}{D},\n\\]\n\nso \\(v_o/v_b=-g_{m1}g_{m2}/D\\), which can be a large negative voltage gain.",
        "format": "markdown",
        "sha256": "14c243e6314dbe6cc4b8a3f6d9785151cf3f197c8aad2eed35ceb3cd102a422f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer reverses M2’s gate and drain connections: in the figure, M2’s gate is driven by Vout and its drain feeds the input node. This misses the central feedback loop and derives a different circuit’s transimpedance and input resistance.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1728,
        "input_tokens": 1825,
        "output_tokens": 48006,
        "total_tokens": 49831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 45954,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1728,
        "input_tokens": 1825,
        "output_tokens": 48006,
        "total_tokens": 49831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 45954,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit interpretation\n\nLet \\(X\\) denote the lower input node and \\(Y=V_{\\text{out}}\\). From the device symbols,\n\n- \\(M_1\\) is NMOS: \\(D=Y,\\;S=X,\\;G=V_b\\).\n- \\(M_2\\) is PMOS: \\(S=V_{DD},\\;D=X,\\;G=Y\\).\n- \\(V_{DD}\\) and \\(V_b\\) are AC grounds.\n- All current sources are ideal, hence AC open circuits.\n- Let \\(I_B\\) be the current of the unlabeled lower sink.\n\nThus \\(M_2\\) senses the output voltage with its gate and feeds a current back into the input node. This is a shunt-shunt feedback transimpedance amplifier.\n\n---\n\n## 2. DC operation\n\nSince the gate of \\(M_2\\) draws no DC current and the output is unloaded, KCL at \\(Y\\) gives\n\n\\[\nI_{D1}=I_1 .\n\\]\n\nNeglecting channel-length modulation and body effect,\n\n\\[\nI_1=\\frac{\\beta_1}{2}(V_b-V_X-V_{TN})^2,\n\\]\n\nso\n\n\\[\nV_X=V_b-V_{TN}-V_{OV1},\n\\qquad\nV_{OV1}=\\sqrt{\\frac{2I_1}{\\beta_1}}.\n\\]\n\nHence \\(V_X\\) is essentially fixed by \\(I_1\\) and \\(V_b\\).\n\nAt node \\(X\\),\n\n\\[\nI_B=I_1+I_2+I_{\\text{in}},\n\\]\n\nwhere \\(I_2\\) is the PMOS source-to-drain current of \\(M_2\\). Around a quiescent point,\n\n\\[\nI_{2Q}=I_B-I_1-I_{\\text{in},Q}.\n\\]\n\nA positive incremental input current therefore reduces the current supplied by \\(M_2\\):\n\n\\[\nI_2=I_{2Q}-i_{\\text{in}}.\n\\]\n\nFor square-law \\(M_2\\),\n\n\\[\nI_2=\\frac{\\beta_2}{2}\n\\left(V_{DD}-V_{\\text{out}}-|V_{TP}|\\right)^2 ,\n\\]\n\nand therefore\n\n\\[\nV_{\\text{out}}\n=\nV_{DD}-|V_{TP}|\n-\\sqrt{\\frac{2\\left(I_{2Q}-i_{\\text{in}}\\right)}{\\beta_2}} .\n\\]\n\nThis large-signal relation is nonlinear. Its small-signal slope is\n\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{i_{\\text{in}}}\\simeq \\frac{1}{g_{m2}}}\n\\]\n\nwith\n\n\\[\ng_{m2}=\\sqrt{2\\beta_2 I_{2Q}}\n      =\\frac{2I_{2Q}}{V_{OV2}} .\n\\]\n\nThe sign is positive: increasing \\(i_{\\text{in}}\\) reduces \\(I_2\\), requiring the gate voltage \\(V_{\\text{out}}\\) to rise.\n\n---\n\n## 3. First-order small-signal analysis\n\nAssume \\(\\lambda=0\\) and no body effect.\n\nBecause the current source \\(I_1\\) is fixed and \\(M_2\\)'s gate draws no current,\n\n\\[\n\\delta I_{D1}=0.\n\\]\n\nConsequently, with \\(M_1\\)'s gate fixed,\n\n\\[\nv_X=0,\n\\]\n\nso the ideal small-signal input resistance is zero:\n\n\\[\n\\boxed{r_{\\text{in}}\\simeq 0}.\n\\]\n\nFor \\(M_2\\),\n\n\\[\n\\delta I_2=-g_{m2}v_{\\text{out}}.\n\\]\n\nKCL at \\(X\\) gives\n\n\\[\ni_{\\text{in}}+\\delta I_{D1}+\\delta I_2=0\n\\]\n\nand hence\n\n\\[\ni_{\\text{in}}=g_{m2}v_{\\text{out}}.\n\\]\n\nTherefore the open-circuit transresistance is\n\n\\[\n\\boxed{R_T\\equiv\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n      =\\frac{1}{g_{m2}} }.\n\\]\n\n### Output resistance\n\nInject a test current \\(i_t\\) into \\(Y\\), with \\(i_{\\text{in}}=0\\). Then\n\n\\[\n\\delta I_{D1}=i_t,\n\\]\n\nand KCL at \\(X\\) gives\n\n\\[\ng_{m2}v_{\\text{out}}=i_t.\n\\]\n\nThus\n\n\\[\n\\boxed{r_{\\text{out}}=\\frac{v_{\\text{out}}}{i_t}\n      =\\frac{1}{g_{m2}} }.\n\\]\n\nEquivalently, if a load current \\(i_L\\) leaves the output,\n\n\\[\ni_{\\text{in}}=g_{m2}v_{\\text{out}}+i_L .\n\\]\n\nThe output is therefore a Norton source \\(i_{\\text{in}}\\) in parallel with \\(1/g_{m2}\\). Its short-circuit current gain is unity.\n\n---\n\n## 4. Including \\(r_o\\) and body effect\n\nDefine\n\n\\[\nG_1=g_{m1}+g_{mb1}+g_{o1}, \\qquad g_{o1}=\\frac1{r_{o1}},\n\\]\n\nand let \\(g_{o2}=1/r_{o2}\\). The incremental currents are\n\n\\[\ni_{d1}=g_{o1}v_Y-G_1v_X,\n\\]\n\n\\[\ni_2=-g_{m2}v_Y-g_{o2}v_X .\n\\]\n\nWith a test current \\(i_t\\) injected at \\(Y\\),\n\n\\[\ni_t=i_{d1}, \\qquad\ni_{\\text{in}}+i_{d1}+i_2=0 .\n\\]\n\nSolving,\n\n\\[\nv_Y=\n\\frac{G_1 i_{\\text{in}}+(G_1+g_{o2})i_t}\n     {G_1g_{m2}+g_{o1}g_{o2}} .\n\\]\n\nTherefore\n\n\\[\n\\boxed{\n\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n=\n\\frac{G_1}{G_1g_{m2}+g_{o1}g_{o2}}\n\\approx \\frac1{g_{m2}}\n}\n\\]\n\n\\[\n\\boxed{\nr_{\\text{in}}\n=\n\\frac{g_{o1}}{G_1g_{m2}+g_{o1}g_{o2}}\n\\approx\n\\frac{1}\n{g_{m2}(g_{m1}+g_{mb1})r_{o1}}\n}\n\\]\n\n\\[\n\\boxed{\nr_{\\text{out}}\n=\n\\frac{G_1+g_{o2}}\n     {G_1g_{m2}+g_{o1}g_{o2}}\n\\approx \\frac1{g_{m2}}\n}.\n\\]\n\nThus finite \\(g_{m1}r_{o1}\\) makes the input resistance extremely small rather than exactly zero. Finite output resistance of the upper current source also appears approximately in parallel with \\(1/g_{m2}\\).\n\n---\n\n## 5. Functional summary\n\nThe circuit is a negative-feedback current-to-voltage converter:\n\n- input quantity: current \\(i_{\\text{in}}\\);\n- output quantity: voltage \\(v_{\\text{out}}\\);\n- input resistance: ideally zero;\n- output resistance: approximately \\(1/g_{m2}\\);\n- transresistance: \\(1/g_{m2}\\);\n- short-circuit current gain: approximately \\(+1\\).\n\nThe feedback action is: \\(V_{\\text{out}}\\uparrow\\) reduces the PMOS \\(M_2\\) current into \\(X\\); \\(M_1\\) responds in a direction that pulls \\(V_{\\text{out}}\\) back down.\n\nThese results require \\(M_1\\), \\(M_2\\), and both bias current sources to remain in saturation. In particular \\(I_{2Q}>0\\), \\(I_{2Q}-i_{\\text{in}}>0\\), and \\(M_1\\) requires approximately \\(V_{\\text{out}}\\ge V_b-V_{TN}\\). At high frequency, device capacitances introduce poles, so loop stability must also be checked.",
        "format": "markdown",
        "sha256": "8c6158779a268053a8f5d32cca37042ab04172e3165315f1caf164b91d55b896"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, describes feedback to the input node, and gives the low input resistance and transresistance/output resistance near 1/gm2. Its ideal-zero input-resistance case is qualified by a finite-ro expression consistent with the golden solution.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1728,
        "input_tokens": 1825,
        "output_tokens": 38031,
        "total_tokens": 39856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36405,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1728,
        "input_tokens": 1825,
        "output_tokens": 38031,
        "total_tokens": 39856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36405,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No — **not for any finite value of the three load capacitors**. In an ideal three-inverter ring oscillator, making all three \\(C_L\\)’s very large makes the oscillator **slower**, but it does not create a finite capacitance at which oscillation stops.\n\nA standard small-signal model for each inverter is\n\n\\[\nH(s)= -\\frac{A_0}{1+s\\tau}, \\qquad \\tau \\approx R_o C_L ,\n\\]\n\nwhere \\(A_0\\) is the dc voltage gain of an inverter near its switching point. For the 3-stage loop,\n\n\\[\nL(s)=H(s)^3=-\\frac{A_0^3}{(1+s\\tau)^3}.\n\\]\n\nThe phase condition for oscillation gives\n\n\\[\n-\\pi-3\\tan^{-1}(\\omega\\tau)=-2\\pi\n\\]\n\nso\n\n\\[\n\\tan^{-1}(\\omega\\tau)=\\frac{\\pi}{3},\\qquad \\omega\\tau=\\sqrt{3}.\n\\]\n\nAt that frequency,\n\n\\[\n|L|=\\frac{A_0^3}{(1+3)^{3/2}}=\\left(\\frac{A_0}{2}\\right)^3.\n\\]\n\nThus startup requires roughly\n\n\\[\nA_0>2,\n\\]\n\nwhich is normally true for CMOS inverters. Notice that \\(C_L\\) appears only in \\(\\tau=R_oC_L\\); it sets the oscillation frequency,\n\n\\[\n\\omega \\propto \\frac{1}{C_L},\n\\]\n\nbut it does **not** remove the instability condition. The period and startup time grow roughly in proportion to \\(C_L\\).\n\nIntuitively: a larger capacitor makes \\(dv/dt=i/C_L\\) smaller, but still nonzero for finite \\(C_L\\). The inverter can still charge/discharge it, just more slowly. Also, the oscillator moves to a lower frequency such that \\(\\omega C_L\\) remains finite, so the capacitors are not simply “AC shorts” at the actual oscillation frequency.\n\nIn the strict limit \\(C_L\\to\\infty\\), however,\n\n\\[\nf\\to 0\n\\]\n\nand the startup time goes to infinity. So an ideal circuit with literally infinite capacitance would not oscillate at any finite frequency. Practical nonidealities — leakage, finite observation time, noise, offsets, capacitor ESR/leakage, limited inverter gain — can also prevent startup in a real circuit. But in the ideal model, arbitrarily large finite capacitors do not by themselves kill the oscillation.",
        "format": "markdown",
        "sha256": "c700979b78d4091e37c5ce425d3e4034582c59fff38817a43ec8dce7d2618759"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that any finite equal capacitors slow the ring without stopping oscillation, and supports this with a valid small-signal phase and gain analysis showing frequency scales inversely with capacitance. The infinite-capacitance limiting caveat does not contradict the answer.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1850,
        "output_tokens": 12817,
        "total_tokens": 14667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12326,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1850,
        "output_tokens": 12817,
        "total_tokens": 14667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12326,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For any **finite** \\(C_L\\), the ideal ring oscillator does **not** fail just because \\(C_L\\) is made very large. It oscillates **arbitrarily slowly**. In the strict mathematical limit \\(C_L\\to\\infty\\), the period tends to infinity, so there is no finite-frequency oscillation.\n\nAssume a usual inverter model with finite drive current/output resistance. The three node equations can be written as\n\n\\[\nC_L\\frac{dv_i}{dt}=I_i(v_{i-1},v_i),\\qquad i=1,2,3\n\\]\n\nwith the loop closed cyclically. If \\(C_L\\) is multiplied by \\(k\\), then\n\n\\[\nkC_L\\frac{dv_i}{dt}=I_i(v_{i-1},v_i)\n\\]\n\nhas the same solution with time stretched by \\(k\\):\n\n\\[\nv_i^{(k)}(t)=v_i^{(1)}(t/k).\n\\]\n\nSo the phase portrait and stability are unchanged; only all time constants and the oscillation period scale by \\(k\\). In large-signal terms, a finite inverter current must move \\(\\Delta V\\) on a capacitor:\n\n\\[\n\\Delta t \\sim \\frac{C_L\\Delta V}{I_{\\text{drive}}},\n\\]\n\nso the period grows roughly linearly with \\(C_L\\).\n\nA small-signal model makes the same point. If each inverter is modeled as\n\n\\[\nH(s)=\\frac{-A}{1+sR_oC_L},\n\\]\n\nthen the characteristic equation is\n\n\\[\n(1+sR_oC_L)^3+A^3=0.\n\\]\n\nIts oscillatory roots have\n\n\\[\n\\operatorname{Re}(s)\\propto \\frac{A/2-1}{R_oC_L},\\qquad\n\\operatorname{Im}(s)\\propto \\frac{1}{R_oC_L}.\n\\]\n\nThus the startup condition \\(A>2\\) is independent of \\(C_L\\); increasing \\(C_L\\) only lowers the frequency and slows startup. At the oscillator frequency, \\(\\omega R_oC_L\\) remains of order unity, e.g. \\(\\sqrt{3}\\) in the marginal linear case, so the capacitor is not simply an AC short at the circuit’s self-selected frequency.\n\nPractical caveats:\n\n- If the inverter gain is too low, \\(A\\le 2\\), it will not oscillate for any \\(C_L\\).\n- If initialized exactly at the metastable dc point with no noise, an ideal deterministic model can sit there forever.\n- For very large \\(C_L\\), noise voltage \\(\\sqrt{kT/C_L}\\) is smaller and startup time grows, so a real circuit may appear stuck over ordinary observation times.\n- If \\(C_L\\) is literally infinite, then \\(\\dot v=I/C_L\\to0\\); the node voltages are frozen on any finite time scale and the oscillation period is infinite.\n\nSo: **no finite upper capacitance kills the ideal oscillation; it just makes the oscillator arbitrarily slow. In the infinite-capacitance limit, oscillation degenerates to zero frequency.**",
        "format": "markdown",
        "sha256": "5e4dbeee4bb28cd090a3c389e97d56287691402f8c2b4fde5f136e8a714cadbe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal loading at all three nodes does not stop oscillation for finite capacitance; it lowers the frequency and lengthens startup. The delay and small-signal arguments support the conclusion, and the infinite-capacitance distinction is appropriate.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1728,
        "input_tokens": 1850,
        "output_tokens": 13802,
        "total_tokens": 15652,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13190,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1728,
        "input_tokens": 1850,
        "output_tokens": 13802,
        "total_tokens": 15652,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13190,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No—not for any **finite** value of the three equal load capacitors, assuming ideal capacitors and inverters with sufficient gain. The circuit only approaches a zero-frequency limit.\n\nLet \\(v_i\\) be a node voltage. In the usual model,\n\n\\[\nC_L\\frac{dv_i}{dt}=I_i(v_{i-1},v_i),\n\\]\n\nwhere \\(I_i\\) is the inverter's net output current. If all three capacitors are multiplied by \\(\\lambda\\),\n\n\\[\n\\lambda C_0\\frac{dv_i}{dt}=I_i(v_{i-1},v_i).\n\\]\n\nWith the time scaling \\(t' = t/\\lambda\\), this becomes the original equation. Thus the waveforms, amplitudes, equilibrium stability, and existence of a limit cycle are unchanged; only every time scale is stretched by \\(\\lambda\\):\n\n\\[\nT_{\\rm osc}\\propto C_L,\\qquad f_{\\rm osc}\\propto \\frac{1}{C_L},\n\\]\n\nand the startup growth rate also decreases as \\(1/C_L\\).\n\nFor example, with a one-pole inverter model\n\n\\[\nA(s)=-\\frac{A_0}{1+sR_oC_L},\n\\]\n\nthe three-stage loop has poles\n\n\\[\ns=\\frac{A_0/2-1\\;\\pm\\;j\\sqrt3 A_0/2}{R_oC_L}.\n\\]\n\nThe startup condition \\(A_0>2\\) is independent of \\(C_L\\); increasing \\(C_L\\) merely moves the poles toward the origin. Equivalently, at startup \\(\\omega R_oC_L\\approx\\sqrt3\\), so the capacitor impedance \\(1/(\\omega C_L)\\) remains finite—it is not an AC short at the circuit's own oscillation frequency.\n\nHowever:\n\n- In the strict \\(C_L\\to\\infty\\) limit, \\(dv/dt\\to0\\), and both oscillation period and startup time become infinite; there is no finite-period oscillation.\n- With perfectly symmetric initial conditions and no noise or mismatch, the circuit could remain at its unstable equilibrium.\n- In a real circuit, leakage, finite gain, and noise can make startup impractically slow or eliminate oscillation. A practical lower-frequency limit therefore exists, but it is due to nonidealities, not capacitance alone.\n\nSo, for finite equal capacitors: it oscillates arbitrarily slowly. At exactly infinite capacitance: it is frozen.",
        "format": "markdown",
        "sha256": "a0c79c9ec83e012a3117afa164a2a7a144ebcd4a6f3640ea214ae203b8d6af25"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal finite capacitors do not stop oscillation: they stretch the time scale and reduce frequency approximately inversely with capacitance, while the startup condition remains unchanged. The exact-infinite-capacitance limit is a reasonable nuance, not a contradiction.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1728,
        "input_tokens": 1850,
        "output_tokens": 17449,
        "total_tokens": 19299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16970,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1728,
        "input_tokens": 1850,
        "output_tokens": 17449,
        "total_tokens": 19299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16970,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the inverter sizes, supply voltage, and device-noise sources remain unchanged and \\(C_L\\) dominates the node capacitance:\n\n\\[\nt_d \\propto C_L,\\qquad f_0 \\simeq \\frac{1}{6t_d}\n\\]\n\nso doubling all three capacitors halves the oscillation frequency:\n\n\\[\nf_0'=\\frac{f_0}{2}.\n\\]\n\nThe waveform, ISF, and effective \\(Q\\) remain essentially unchanged, while the oscillator power \\(P\\propto C_LV_{DD}^2f_0\\) remains constant. In the white-noise \\(1/\\Delta f^2\\) region, Leeson’s relation gives\n\n\\[\n\\mathcal L(\\Delta f)\\propto\n\\frac{1}{P}\\left(\\frac{f_0}{2Q\\Delta f}\\right)^2 .\n\\]\n\nTherefore, at the same **absolute offset** \\(\\Delta f\\),\n\n\\[\n\\frac{\\mathcal L'}{\\mathcal L}\n=\\left(\\frac{f_0'}{f_0}\\right)^2\n=\\frac14,\n\\]\n\nso the phase noise decreases by\n\n\\[\n10\\log_{10}\\!\\left(\\frac14\\right)\\approx -6.0\\ \\text{dB}.\n\\]\n\nEquivalently, the maximum switched charge \\(q_{\\max}\\sim C_LV_{DD}\\) doubles, and \\(\\mathcal L\\propto1/q_{\\max}^2\\).\n\nImportant qualifications:\n\n- At the same **fractional offset** \\(\\Delta f/f_0\\), both \\(f_0\\) and \\(\\Delta f\\) halve, so the phase noise is approximately unchanged.\n- The far-from-carrier noise floor is approximately unchanged; the \\(1/f^2\\)-region corner moves to half the offset.\n- If \\(f_0\\) is instead kept constant by doubling the drive current/power, the ideal improvement is only about \\(3\\) dB, at twice the power.",
        "format": "markdown",
        "sha256": "f978eb04890a834509ecbbb9bb6f7db4e8a41634425904d7e39f474427f4ba21"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling the capacitors halves the oscillation frequency and reduces phase noise by about a factor of four (6 dB) at a fixed absolute offset. The fixed-fractional-offset qualification is also consistent with the golden solution.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1848,
        "output_tokens": 21515,
        "total_tokens": 23363,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21136,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1848,
        "output_tokens": 21515,
        "total_tokens": 23363,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21136,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The answer depends on whether the offset is held fixed in absolute frequency or as a fraction of the carrier.\n\nAssuming unchanged inverter bias/swing and the usual white-noise \\(1/\\Delta f^{2}\\) phase-noise region:\n\n\\[\nt_d \\propto C_L,\\qquad f_0\\propto \\frac{1}{C_L}.\n\\]\n\nThus doubling all three capacitors halves the oscillation frequency. It also doubles the maximum switched charge,\n\n\\[\nq_{\\max}=C_LV_{\\rm sw},\n\\]\n\nwhile the device-noise PSD and normalized impulse sensitivity remain approximately unchanged. Since\n\n\\[\n\\mathcal L(\\Delta f)\\propto\n\\frac{S_i\\Gamma_{\\rm rms}^2}{q_{\\max}^2\\Delta f^2}\n\\propto \\frac{1}{C_L^2\\Delta f^2},\n\\]\n\nat the same **absolute offset**:\n\n\\[\n\\boxed{\\mathcal L'(\\Delta f)\\approx \\frac{1}{4}\\mathcal L(\\Delta f)}\n\\]\n\nso the phase noise improves by approximately \\(6\\ \\text{dB}\\) — e.g., \\(-100\\) becomes \\(-106\\ \\text{dBc/Hz}\\).\n\nHowever, if the comparison is at the same **fractional offset** \\(\\Delta f/f_0\\), the new offset is also halved, and the two effects cancel:\n\n\\[\n\\boxed{\\mathcal L'(r f_0')=\\mathcal L(r f_0)}.\n\\]\n\nThus there is no improvement in normalized phase noise or oscillator figure of merit; the oscillator has simply been made slower. The far-out noise floor and flicker-noise-upconverted regions may scale differently.",
        "format": "markdown",
        "sha256": "8f392541c569ddaf3a5673b2c7d8e0b47b9253ecfb224efe10542cf7a87a68ad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by about a factor of four (6 dB) at a fixed absolute offset, with a valid charge-based justification. It also correctly notes that the change cancels at a fixed fractional offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1728,
        "input_tokens": 1848,
        "output_tokens": 25307,
        "total_tokens": 27155,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24980,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1728,
        "input_tokens": 1848,
        "output_tokens": 25307,
        "total_tokens": 27155,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24980,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the inverter bias and device-noise PSD are unchanged, doubling every \\(C_L\\) doubles each stage delay, so\n\n\\[\nf_0 \\rightarrow \\frac{f_0}{2}.\n\\]\n\nIn the usual close-in \\(1/\\Delta f^2\\) region, ring-oscillator phase noise scales as\n\n\\[\n\\mathcal L(\\Delta f)\\propto\n\\frac{S_{i_n}\\Gamma_{\\rm rms}^2}\n{(C_LV_{DD})^2\\Delta f^2}\n\\propto\n\\left(\\frac{f_0}{Q\\Delta f}\\right)^2\\frac{1}{P}.\n\\]\n\nThe effective \\(Q\\), waveform, and average power remain approximately unchanged, while the maximum switched charge \\(q_{\\max}=C_LV_{DD}\\) doubles. Therefore, at the same absolute offset \\(\\Delta f\\),\n\n\\[\n\\boxed{\\mathcal L'=\\frac{\\mathcal L}{4}}\n\\]\n\nor about **6 dB lower phase noise**.\n\nQualifications:\n\n- At the same **fractional** offset \\(\\Delta f/f_0\\), \\(\\Delta f\\) also halves, so the phase noise is approximately unchanged.\n- If the original \\(f_0\\) is restored by doubling the inverter current/power, the improvement is only about **3 dB**.\n- The result above refers to the close-in \\(1/\\Delta f^2\\) phase-noise region.",
        "format": "markdown",
        "sha256": "7727caf652c803dbdaf54f452e3b8d3acc69ff126c6cc6c730a28df7b528cdb8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and lowers phase noise by a factor of four (about 6 dB) at the same absolute offset; the fractional-offset qualification is also appropriate.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1728,
        "input_tokens": 1848,
        "output_tokens": 21087,
        "total_tokens": 22935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20812,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1728,
        "input_tokens": 1848,
        "output_tokens": 21087,
        "total_tokens": 22935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20812,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends on the inverter model. For real CMOS inverters with finite small-signal gain, **yes: a sufficiently large \\(C_L\\) eventually stops oscillation** if the other node capacitances remain fixed.\n\nModel each inverter near its switching point as a one-pole inverting stage,\n\n\\[\nA_i(s)=-\\frac{A_0}{1+s\\tau_i},\n\\]\n\nwhere \\(A_0=g_mr_o\\) and \\(\\tau_i=r_oC_i\\). The loop characteristic equation is\n\n\\[\n(1+s\\tau_1)(1+s\\tau_2)(1+s\\tau_3)+A_0^3=0.\n\\]\n\nFor \\(\\tau_1=T=r\\tau\\) at the heavily loaded node and \\(\\tau_2=\\tau_3=\\tau\\), with \\(r=(C_p+C_L)/C_p\\), Routh’s criterion gives startup instability—hence oscillation—only when\n\n\\[\nA_0^3>2r+4+\\frac{2}{r}.\n\\]\n\nFor \\(r=1\\), this reduces to the familiar \\(A_0>2\\). But as \\(C_L\\to\\infty\\), \\(r\\to\\infty\\), and the right-hand side grows without bound. Thus, for any finite \\(A_0\\), the closed-loop poles eventually move into the left half-plane; the circuit settles at its dc switching-point equilibrium rather than oscillating.\n\nThe corresponding maximum is\n\n\\[\nr_{\\max}=\n\\frac{A_0^3-4+\\sqrt{(A_0^3-4)^2-16}}{4},\n\\qquad A_0>2.\n\\]\n\nPhysically, the huge capacitor creates a dominant pole. The loop crossover becomes so low that the other two stages provide too little phase shift for regeneration; equivalently, the heavy loading attenuates the loop at the frequency where that phase shift is available.\n\nTwo important qualifications:\n\n- If the inverters are idealized as infinite-gain Boolean elements with pure propagation delay, the circuit keeps oscillating with \\(f\\to0\\); there is no finite \\(C_{L,\\max}\\).\n- If the capacitances of all three stages are increased together, \\(A_0>2\\) remains sufficient and the frequency simply decreases.\n\nThus, arbitrarily low frequency from a single arbitrarily large \\(C_L\\) is an idealization; a finite-gain physical ring oscillator has a finite maximum load capacitance.",
        "format": "markdown",
        "sha256": "43cebd62fae5ca08cb832553e29d416218c3248f980f13e84d617bdb40ed1dba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that a sufficiently large load on only one node can stop oscillation in a finite-gain circuit, and explains the dominant-pole and loop-gain/phase-roll-off mechanism. The added model and qualifications do not contradict the essential answer.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1755,
        "output_tokens": 32339,
        "total_tokens": 34094,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31857,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1755,
        "output_tokens": 32339,
        "total_tokens": 34094,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31857,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For a **real ring oscillator with finite inverter gain**, **yes**: increasing only \\(C_L\\) cannot reduce the frequency without bound. Beyond a finite \\(C_L\\), the circuit ceases to self-oscillate.\n\nLet each inverter have small-signal gain \\(-A_0\\) and output-node time constant \\(\\tau_i=R_oC_i\\). Then\n\n\\[\nL(s)=\\frac{-A_0^3}\n{(1+s\\tau_1)(1+s\\tau_2)(1+s\\tau_3)},\n\\]\n\nwhere \\(\\tau_1=R_o(C_{\\rm node}+C_L)\\). The characteristic polynomial is\n\n\\[\n(1+s\\tau_1)(1+s\\tau_2)(1+s\\tau_3)+A_0^3=0.\n\\]\n\nWriting it as \\(a_3s^3+a_2s^2+a_1s+a_0\\), startup requires\n\n\\[\na_2a_1<a_3a_0,\n\\]\n\nor\n\n\\[\n(\\tau_1\\tau_2+\\tau_1\\tau_3+\\tau_2\\tau_3)\n(\\tau_1+\\tau_2+\\tau_3)\n<\n\\tau_1\\tau_2\\tau_3(1+A_0^3).\n\\]\n\nAs \\(C_L\\to\\infty\\), \\(\\tau_1\\to\\infty\\); the left side grows as \\(\\tau_1^2\\), while the right side grows only as \\(\\tau_1\\). Hence the equilibrium becomes stable and oscillations die out.\n\nEquivalently, the frequency needed for the three poles to supply the extra \\(180^\\circ\\) phase approaches\n\n\\[\n\\omega^2=\\frac{\\tau_1+\\tau_2+\\tau_3}\n{\\tau_1\\tau_2\\tau_3}\n\\;\\longrightarrow\\;\n\\frac{1}{\\tau_2\\tau_3},\n\\]\n\na finite frequency. At that frequency, the dominant loaded pole gives attenuation proportional to \\(\\omega\\tau_1\\sim C_L\\), so the finite inverter gain eventually cannot satisfy the loop-gain condition.\n\nFor example, if \\(\\tau_2=\\tau_3=\\tau\\) and \\(r=\\tau_1/\\tau\\), startup requires\n\n\\[\nA_0^3>2r+4+\\frac{2}{r},\n\\]\n\nso \\(r\\), and therefore \\(C_L\\), has a finite upper limit.\n\nAn ideal digital model with infinite-gain inverters and prescribed propagation delays predicts that every finite \\(C_L\\) merely makes the frequency tend toward zero. That is a nonphysical singular limit: it ignores finite small-signal gain and startup. In a physical circuit—and especially with leakage and noise—there is a finite maximum \\(C_L\\).",
        "format": "markdown",
        "sha256": "29cc01f7587064bd88e4ff47d186f2ea6643d0423b4fa07ed047b6a5d856b72e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large loading on one node stops oscillation, and explains it through finite gain and dominant-pole loop-gain loss. The small-signal stability derivation is consistent with that conclusion.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1755,
        "output_tokens": 28942,
        "total_tokens": 30697,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28391,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1755,
        "output_tokens": 28942,
        "total_tokens": 30697,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28391,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends on the inverter model, but **for real, finite-gain inverters, yes: there is a finite maximum \\(C_L\\)** beyond which oscillation cannot start and the circuit settles to a dc operating point.\n\nModel each inverter near its switching point as a one-pole inverting amplifier,\n\n\\[\nA_i(s)=-\\frac{g_i}{1+s\\tau_i},\\qquad \n\\tau_1 \\simeq R_o(C_{\\rm int}+C_L),\n\\]\n\nand let \\(K=g_1g_2g_3\\) be the low-frequency loop-gain magnitude. The characteristic equation is\n\n\\[\n(1+s\\tau_1)(1+s\\tau_2)(1+s\\tau_3)+K=0.\n\\]\n\nUsing the Routh–Hurwitz criterion, a growing oscillation requires\n\n\\[\nK+1>\n(\\tau_1+\\tau_2+\\tau_3)\n\\left(\\frac1{\\tau_1}+\\frac1{\\tau_2}+\\frac1{\\tau_3}\\right).\n\\]\n\nAs \\(C_L\\), and hence \\(\\tau_1\\), becomes very large,\n\n\\[\n(\\tau_1+\\tau_2+\\tau_3)\n\\left(\\frac1{\\tau_1}+\\frac1{\\tau_2}+\\frac1{\\tau_3}\\right)\n\\approx\n\\tau_1\\left(\\frac1{\\tau_2}+\\frac1{\\tau_3}\\right)\\to\\infty .\n\\]\n\nSince \\(K\\) is finite, the startup condition eventually fails. The heavily loaded node becomes a dominant pole; the other two inverters behave approximately as a static noninverting path, producing stable negative feedback around a single slow node rather than a three-pole oscillator.\n\nFor example, if \\(\\tau_2=\\tau_3=\\tau\\), \\(x=\\tau_1/\\tau\\), and all three gains are \\(g\\), startup requires\n\n\\[\n2x^2+(4-g^3)x+2<0,\n\\]\n\nso there is an upper limit\n\n\\[\nx_{\\max}=\n\\frac{g^3-4+\\sqrt{(g^3-4)^2-16}}{4},\n\\]\n\ncorresponding to a finite \\(C_{L,\\max}\\). For large gain, \\(C_{L,\\max}\\) is roughly proportional to \\(g^3C_{\\rm int}\\), so it may be very large, but it is not unbounded. Leakage currents generally make the practical limit smaller.\n\n**Idealized caveat:** If the inverters are modeled as ideal threshold switches with infinite dc gain and propagation delay, then any finite \\(C_L\\) can eventually be charged and the model predicts oscillation with period tending to infinity as \\(C_L\\to\\infty\\). That model has no finite-gain cutoff. Thus:\n\n- **Finite-gain physical inverter:** oscillation eventually fails.\n- **Ideal infinite-gain/pure-delay inverter:** no failure for any finite \\(C_L\\); \\(f_{\\rm osc}\\to0\\).",
        "format": "markdown",
        "sha256": "cef40a35438b8ae284fb7eb50d4cbc197956e15e4cf33521c35205d8ed37476e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large one-node loading prevents oscillation in a finite-gain inverter ring, and explains the dominant-pole gain/phase loss and resulting stable DC behavior. The Routh-Hurwitz analysis is consistent; the idealized-model caveat does not undermine the physical-circuit answer.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1755,
        "output_tokens": 28490,
        "total_tokens": 30245,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27889,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1755,
        "output_tokens": 28490,
        "total_tokens": 30245,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27889,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the capacitances are dominated by the MOS devices and \\(V_{DD}\\) is unchanged, doubling both widths while keeping their ratio gives\n\n\\[\nC_L\\rightarrow 2C_L,\\qquad I_D,\\;g_m,\\;g_{ds}\\rightarrow 2\\times .\n\\]\n\nHence the inverter delay\n\n\\[\nt_d \\sim \\frac{C_LV_{DD}}{I_D}\n\\]\n\nand therefore the oscillation frequency \\(f_0\\) remain approximately unchanged. The white channel-noise current PSD doubles:\n\n\\[\nS_{i_n}=4kT\\gamma g_m \\rightarrow 2S_{i_n},\n\\]\n\nbut the charge swing \\(q_{\\max}=C_LV_{DD}\\) also doubles. Since phase noise scales as\n\n\\[\n\\mathcal L(\\Delta f)\\propto\n\\frac{S_{i_n}}{q_{\\max}^2\\Delta f^2},\n\\]\n\nwe obtain\n\n\\[\n\\frac{\\mathcal L_{\\text{new}}}{\\mathcal L_{\\text{old}}}\n=\\frac{2}{2^2}=\\frac12 .\n\\]\n\nThus the \\(1/f^2\\) phase-noise spectral density is halved, i.e. it improves by approximately **3 dB** (\\(\\sim -3\\) dBc/Hz), and RMS jitter decreases by \\(\\sqrt2\\). The cost is approximately twice the power consumption.\n\nIf a large fixed load capacitance or an external bias current dominates, \\(f_0\\) will not remain constant and this simple 3-dB result need not apply.",
        "format": "markdown",
        "sha256": "266902db67994b8b4431433575d2201af80ed211998d1ab64c66060f691cead7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that phase noise is halved, an approximately 3 dB improvement, and gives the valid scaling argument that device noise doubles while squared signal charge quadruples.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2794,
        "output_tokens": 15830,
        "total_tokens": 18624,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15527,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2794,
        "output_tokens": 15830,
        "total_tokens": 18624,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15527,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(V_{DD}\\), lengths, and the PMOS/NMOS width ratio are unchanged, and the node capacitance is dominated bydevice parasitics:\n\n- Doubling \\(W\\) doubles \\(I_D\\), \\(g_m\\), and \\(C_{\\text{node}}\\).\n- The inverter delay \\(t_d \\sim C_{\\text{node}}V_{DD}/I_D\\), so \\(f_0\\) stays approximately unchanged.\n- The thermal-noise current PSD scales as \\(S_{i_n}\\propto g_m\\propto W\\), while the maximum switched charge \\(q_{\\max}=C_{\\text{node}}V_{DD}\\propto W\\).\n\nUsing the ISF/Leeson scaling,\n\n\\[\n\\mathcal L(\\Delta f)\\propto \n\\frac{S_{i_n}}{q_{\\max}^2\\Delta f^2}\n\\propto \\frac{W}{W^2}=\\frac{1}{W},\n\\]\n\nor equivalently \\(P_{\\text{diss}}\\) doubles while \\(f_0\\) is unchanged.\n\nTherefore,\n\n\\[\n\\boxed{\\mathcal L_{2W} \\approx \\frac{1}{2}\\mathcal L_W}\n\\]\n\nso the phase-noise power at a given offset improves by about **3 dB** — e.g., \\(-100\\ \\mathrm{dBc/Hz}\\) becomes about \\(-103\\ \\mathrm{dBc/Hz}\\). Power and area roughly double.\n\nCaveat: if a large fixed load/wiring capacitance dominates, then \\(C_{\\text{node}}\\) does not double and \\(f_0\\) rises; at a fixed absolute offset the phase noise can instead get worse. The \\(-3\\,\\mathrm{dB}\\) result is for the usual intrinsic-capacitance-dominated ring oscillator.",
        "format": "markdown",
        "sha256": "9842160b86d3eba5c23c6ca91c63e8e064bdc94adfef67506f883ce3c5cdba2c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts about a 3 dB phase-noise reduction and gives a valid scaling argument: device noise current PSD and node charge scale with width, yielding a factor-of-two reduction. The fixed-load caveat is outside the figure’s intrinsic-capacitance case and does not undermine the answer.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2794,
        "output_tokens": 15478,
        "total_tokens": 18272,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15129,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2794,
        "output_tokens": 15478,
        "total_tokens": 18272,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15129,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(V_{DD}\\) and channel lengths remain fixed and the node capacitances are dominated by MOS parasitics:\n\n- Doubling \\(W\\) doubles \\(I_D\\), \\(g_m\\), and node capacitance \\(C_L\\).\n- Hence the stage delay \\(t_d \\sim C_LV_{DD}/I_D\\), and therefore \\(f_0\\), remain approximately unchanged.\n- The thermal-noise current PSD \\(S_{i_n}=4kT\\gamma g_m\\) doubles, while the switched charge \\(q_{\\max}=C_LV_{DD}\\) also doubles.\n\nUsing\n\\[\n\\mathcal L(\\Delta f)\\propto\n\\frac{S_{i_n}}{q_{\\max}^2\\Delta f^2},\n\\]\nwe obtain\n\\[\n\\frac{\\mathcal L_{\\rm new}}{\\mathcal L_{\\rm old}}\n=\\frac{2}{2^2}=\\frac12.\n\\]\n\nThus the phase-noise power is halved, i.e. it improves by about \\(3\\,\\mathrm{dB}\\) (for example, \\(-100\\) to \\(-103\\) dBc/Hz). RMS phase jitter decreases by \\(\\sqrt{2}\\). The cost is approximately twice the power dissipation. Standard flicker-noise-induced phase noise has approximately the same \\(-3\\) dB scaling.\n\nThis result assumes intrinsic device capacitances dominate; if a fixed external load capacitance dominates, \\(f_0\\) changes and the scaling is different.",
        "format": "markdown",
        "sha256": "24923082d833c1cc2e6df3d9cb94f62012ed8c627bff33a9acd733b355172939"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that phase noise improves by about 3 dB and gives a consistent width-scaling justification. The power cost and capacitance assumption are also appropriate; the additional flicker-noise comment does not undermine the essential answer.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2794,
        "output_tokens": 22840,
        "total_tokens": 25634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22554,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2794,
        "output_tokens": 22840,
        "total_tokens": 25634,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22554,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume identical CMOS inverters, linearized about their symmetric dc switching point, with \\(\\lambda=\\gamma=0\\). Apply a small test voltage \\(v_X\\) to the supply node. By the threefold symmetry, all three inverter input/output nodes have the same small-signal perturbation \\(v_a\\).\n\nFor one inverter,\n\n\\[\n\\Delta I_P=g_{mp}(v_X-v_a),\\qquad\n\\Delta I_N=g_{mn}v_a .\n\\]\n\nCurrent balance at the output requires \\(\\Delta I_P=\\Delta I_N\\), hence\n\n\\[\nv_a=\\frac{g_{mp}}{g_{mn}+g_{mp}}v_X .\n\\]\n\nThe test source supplies the source currents of the three PMOS devices:\n\n\\[\ni_X=3g_{mp}(v_X-v_a)\n   =3\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}v_X .\n\\]\n\nTherefore,\n\n\\[\n\\boxed{R_X=\\frac{v_X}{i_X}\n=\\frac13\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right)} .\n\\]\n\nFor matched NMOS and PMOS devices, \\(g_{mn}=g_{mp}=g_m\\),\n\n\\[\nv_a=\\frac{v_X}{2},\\qquad\n\\boxed{R_X=\\frac{2}{3g_m}} .\n\\]\n\nThus the supply node presents a **positive** small-signal resistance: each inverter contributes \\(2/g_m\\), and three such paths appear in parallel.\n\nIf finite output conductance is retained, for matched devices\n\n\\[\nR_X=\\frac{2}{3(g_m+g_o)}\\approx \\frac{2}{3g_m}.\n\\]\n\nThis is the low-frequency resistance about the symmetric dc bias; during large-signal steady oscillation, the instantaneous supply-port behavior is time-varying.",
        "format": "markdown",
        "sha256": "8d47b42759924987bebee3c1ee49a31ee857f40b3a9d32e3069c46e2177edbc7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The derivation consistently analyzes the static symmetric bias and obtains a gm-based resistance, but misses the dominant oscillation-driven charging and discharging of the load capacitances.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2683,
        "output_tokens": 26937,
        "total_tokens": 29620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2683,
        "output_tokens": 26937,
        "total_tokens": 29620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume three identical CMOS inverters, linearized about the metastable switching point \\(V_1=V_2=V_3\\approx V_{DD}/2\\). Apply a test voltage \\(v_x\\) at the supply node and define \\(i_x\\) as the current entering the oscillator.\n\nLet\n\n\\[\nG_n=g_{mn}+g_{dsn},\\qquad G_p=g_{mp}+g_{dsp},\n\\]\n\nwhere \\(G_n\\) and \\(G_p\\) are the effective pull-down and pull-up small-signal conductances. The common supply perturbation excites the symmetric mode, so all three internal-node perturbations are equal to \\(v\\). For one inverter, KCL gives\n\n\\[\nG_n v=G_p(v_x-v)\n\\quad\\Rightarrow\\quad\nv=\\frac{G_p}{G_n+G_p}v_x .\n\\]\n\nThe current drawn from the test source by all three inverters is\n\n\\[\ni_x=3G_p(v_x-v)\n   =3\\frac{G_nG_p}{G_n+G_p}v_x .\n\\]\n\nHence\n\n\\[\n\\boxed{\nR_X=\\frac{v_x}{i_x}\n=\\frac{G_n+G_p}{3G_nG_p}\n=\\frac13\\left(\\frac1{G_n}+\\frac1{G_p}\\right)\n}\n\\]\n\nor, neglecting channel-length modulation,\n\n\\[\n\\boxed{\nR_X=\\frac13\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right).\n}\n\\]\n\nFor a symmetric inverter with \\(g_{mn}=g_{mp}=g_m\\),\n\n\\[\n\\boxed{R_X=\\frac{2}{3g_m}} .\n\\]\n\nThis is positive with the standard current-into-the-port convention. Strictly, a freely running oscillator has a periodic, not dc, operating point; the result above is the low-frequency/startup resistance obtained by linearizing about the metastable switching point.",
        "format": "markdown",
        "sha256": "a4e6acd06432f17a23b303a033501c0d508223b8d529891b25cadcab1294b706"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The derivation is internally consistent for a static metastable-point linearization, but it ignores the oscillator’s charging and discharging of the load capacitances—the dominant mechanism setting the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 2683,
        "output_tokens": 36528,
        "total_tokens": 39211,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36148,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 2683,
        "output_tokens": 36528,
        "total_tokens": 39211,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36148,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume the usual low-frequency small-signal model: identical CMOS inverters linearized at their common switching point, with \\(\\lambda=0\\). Let a test voltage \\(v_x\\) be applied to \\(V_{DD}\\).\n\nFor one inverter, let \\(v\\) be the small-signal change of its input/output node. Current balance at the output gives\n\n\\[\ng_{mp}(v_x-v)=g_{mn}v .\n\\]\n\nHence\n\n\\[\nv=\\frac{g_{mp}}{g_{mp}+g_{mn}}v_x .\n\\]\n\nFor matched devices, \\(g_{mn}=g_{mp}=g_m\\), so\n\n\\[\nv=\\frac{v_x}{2};\n\\]\n\nequivalently, the inverter trip point follows \\(V_{DD}\\) by one-half.\n\nThe incremental supply current of one inverter is therefore\n\n\\[\ni_{DD,k}=g_{mp}(v_x-v)\n=\\frac{g_{mp}g_{mn}}{g_{mp}+g_{mn}}v_x.\n\\]\n\nWith three identical stages drawing current from the common supply,\n\n\\[\ni_x=3i_{DD,k},\n\\]\n\nso\n\n\\[\n\\boxed{R_X=\\frac{v_x}{i_x}\n=\\frac13\\left(\\frac{1}{g_{mp}}+\\frac{1}{g_{mn}}\\right)}.\n\\]\n\nFor \\(g_{mp}=g_{mn}=g_m\\),\n\n\\[\n\\boxed{R_X=\\frac{2}{3g_m}}.\n\\]\n\nHere \\(g_m\\) is the transconductance of each individual NMOS or PMOS transistor at the switching point. If the inverter transconductance is instead defined as \\(G_m=g_{mn}+g_{mp}=2g_m\\), then \\(R_X=4/(3G_m)\\).\n\nStrictly, a free-running ring oscillator has no stable dc operating point; this result is the dc small-signal resistance about the symmetric metastable switching point. About the actual periodic oscillation, the supply port has a time-/frequency-dependent impedance rather than a single resistance.",
        "format": "markdown",
        "sha256": "a58af4ec6c83c633c14482c76b7a930c93bec1be33a340ef6fc12716f9446d13"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The static small-signal derivation is internally consistent, but it ignores the oscillation-driven charging and discharging of the load capacitances, which sets the supply resistance. The golden solution specifically assigns this gm-based static analysis a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 2683,
        "output_tokens": 26042,
        "total_tokens": 28725,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25629,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2560,
        "input_tokens": 2683,
        "output_tokens": 26042,
        "total_tokens": 28725,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25629,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The quoted result is a **quiescent, zero-frequency, common-mode** result. It is not generally the input resistance of a free-running oscillator.\n\nLet \\(g_n=g_{mn}\\), \\(g_p=g_{mp}\\). At the symmetric dc operating point all three inverter nodes have the same small-signal voltage \\(v\\). For each inverter,\n\n\\[\ni_p \\simeq g_p(v_X-v),\\qquad i_n \\simeq g_n v .\n\\]\n\nKCL gives\n\n\\[\ng_p(v_X-v)=g_n v\n\\quad\\Rightarrow\\quad\nv=\\frac{g_p}{g_n+g_p}v_X .\n\\]\n\nThe total supply current is therefore\n\n\\[\ni_X=3g_p(v_X-v)\n=3\\frac{g_ng_p}{g_n+g_p}v_X,\n\\]\n\nso\n\n\\[\n\\boxed{R_{X0}=\\frac{v_X}{i_X}\n=\\frac{1}{3}\\left(\\frac1{g_n}+\\frac1{g_p}\\right)} .\n\\]\n\nThis assumes the oscillator is suppressed at its unstable dc equilibrium, or that we are looking only at the dc/common-mode perturbation. In a simple \\(g_o=0\\), capacitance-\\(C\\) model, even around that equilibrium the supply admittance is frequency dependent:\n\n\\[\nY_X(s)=3\\frac{g_ng_p}{g_n+g_p}\n\\left[\n1+\\frac{g_p}{g_n}\\frac{sC}{g_n+g_p+sC}\n\\right],\n\\]\n\nand only \\(Y_X(0)\\) gives the quoted \\(R_{X0}\\).\n\nWhen the circuit is actually oscillating:\n\n- the operating point is a periodic limit cycle, not a dc point;\n- \\(g_m(t)\\), \\(g_o(t)\\), and the device currents are periodic;\n- an inverter’s gate and drain are not tied in small signal, so it is not diode-connected;\n- a supply perturbation at frequency \\(\\Omega\\) produces currents at \\(\\Omega+k\\omega_0\\) due to frequency mixing;\n- a free-running oscillator also has a phase mode, so a single scalar “small-signal resistance” is not well defined without specifying phase locking or cycle averaging.\n\nFor a slowly varying supply, the relevant dc conductance is instead\n\n\\[\nG_{\\rm eff}=\\frac{d\\overline{I_{DD}}}{dV_{DD}},\n\\]\n\nnot the quiescent short-circuit conductance. For a mostly capacitively loaded CMOS ring,\n\n\\[\n\\overline{I_{DD}}\\simeq 3 C_L V_{DD} f_0(V_{DD})+\\overline{I_{\\rm sc}},\n\\]\n\nso\n\n\\[\nG_{\\rm eff}\\simeq\n3 C_L\\left(f_0+V_{DD}\\frac{df_0}{dV_{DD}}\\right)\n+\\frac{d\\overline{I_{\\rm sc}}}{dV_{DD}},\n\\]\n\nwhich is generally different from \\(3g_ng_p/(g_n+g_p)\\).\n\nThere is one narrow exception: in an ideal linearized model with constant \\(g_n,g_p\\), the oscillatory mode is a differential/common-mode-orthogonal mode, and the zero-frequency common-mode conductance remains \\(G_0=3g_ng_p/(g_n+g_p)\\). Thus some textbook treatments say “no change” for \\(Y_X(0)\\). But for a real large-signal free-running oscillator, the simple diode-connected resistance is only the dc/quasi-static limit; the actual supply port is a linear periodically time-varying impedance, not a fixed \\(R_X\\).",
        "format": "markdown",
        "sha256": "36b66f437013358b267d11d173202197583c36e1cc9fda076b4955fa2e9228f9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies capacitive charging as the source of oscillation current and gives an average-current expression, but does not derive the effective resistance or establish that it remains on the order of the MOS on-resistance. Its emphasis that the supply port is generally different or lacks a scalar resistance misses the key magnitude conclusion.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2763,
        "output_tokens": 24948,
        "total_tokens": 27711,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24244,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2763,
        "output_tokens": 24948,
        "total_tokens": 27711,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24244,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The subtle answer is:\n\n**The onset of oscillation does not change the zero-frequency resistance of the underlying dc equilibrium, but the quoted expression is not, in general, the supply impedance of a running oscillator.**\n\nAt the symmetric dc operating point, all three inverter inputs and outputs are at the switching voltage \\(v_M\\). If a small supply perturbation \\(v_x\\) is applied, symmetry makes all three internal nodes move by the same amount \\(v_y\\). Consequently, for each inverter, the gate and drain have the same incremental voltage, so the NMOS and PMOS are effectively diode-connected. With\n\n\\[\nG_n \\simeq g_{mn},\\qquad G_p\\simeq g_{mp},\n\\]\n\nnode KCL gives\n\n\\[\nG_n v_y=G_p(v_x-v_y)\n\\]\n\nand hence\n\n\\[\ni_{x,\\text{one inv}}\n   =\\frac{G_nG_p}{G_n+G_p}v_x .\n\\]\n\nThree identical inverters give\n\n\\[\nR_X=\\frac{v_x}{3i_{x,\\text{one inv}}}\n   =\\frac13\\left(\\frac1{G_n}+\\frac1{G_p}\\right)\n   \\simeq \\frac13\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right).\n\\]\n\nThe oscillatory instability is a different spatial mode of the ring—the three node perturbations are approximately \\(120^\\circ\\) apart. An ideal common supply perturbation drives the common mode \\((1,1,1)\\), so crossing the startup condition does not by itself alter this dc common-mode calculation. A positive supply resistance is therefore not inconsistent with oscillation; the effective negative resistance needed for startup appears in the internal oscillatory mode.\n\nHowever, once a finite oscillation is established:\n\n- \\(v_g\\neq v_d\\) during most of the cycle;\n- transistors turn on and off, so \\(g_m(t)\\) is periodic;\n- load capacitances draw switching current;\n- a supply perturbation changes amplitude, frequency, and phase;\n- frequency conversion produces sidebands at \\(\\omega\\pm k\\omega_0\\).\n\nThe small-signal model is then a **linear periodically time-varying** system, not an LTI resistor. One must specify the perturbation frequency and use Floquet/harmonic-balance analysis; the result is generally a complex \\(Z_X(\\omega)\\), possibly affected by injection pulling or locking.\n\nA dc “average resistance” can still be defined as\n\n\\[\nR_{\\mathrm{dc,eff}}^{-1}\n  =\\frac{d\\overline I_{DD}}{dV_{DD}},\n\\]\n\nbut for a hard-switching ring it contains dynamic-current terms of the form\n\n\\[\n\\overline I_{DD}\\approx \\alpha C_L V_{DD} f_{\\rm osc}(V_{DD})\n                       +\\overline I_{\\rm sc},\n\\]\n\nso\n\n\\[\nR_{\\mathrm{dc,eff}}^{-1}\n \\approx \\alpha C_L\\!\\left(f_{\\rm osc}+V_{DD}\\frac{df_{\\rm osc}}{dV_{DD}}\\right)\n +\\frac{d\\overline I_{\\rm sc}}{dV_{DD}},\n\\]\n\nwhich generally differs from the quiescent-\\(g_m\\) expression.\n\nThus: **the formula remains valid as the low-frequency differential resistance of the metastable dc fixed point; it is not a generally valid single resistance for the actual oscillating periodic steady state.**",
        "format": "markdown",
        "sha256": "e25bbc140bc6865b93ae1907cbcb4dbbbfe5fd85714e033c7d2d5ec7f74caaa9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that switching capacitances contribute to the oscillator’s supply current, but does not establish the dynamic resistance or compare its magnitude with the static estimate. The central conclusion that it remains on the order of the MOS on-resistance is missing.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2763,
        "output_tokens": 19923,
        "total_tokens": 22686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19249,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2763,
        "output_tokens": 19923,
        "total_tokens": 22686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19249,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: **the quoted \\(R_X\\) is the dc/common-mode small-signal resistance at the symmetric bias point. It is not, in general, the supply impedance of a free-running oscillator.**\n\nLet\n\n\\[\nr_p \\simeq \\frac{1}{g_{mp}},\\qquad r_n \\simeq \\frac{1}{g_{mn}} .\n\\]\n\nAt the symmetric dc operating point, all inverter inputs and outputs sit at the inverter trip point. For a small dc supply perturbation \\(v_x\\), the internal node of one inverter moves by \\(v_y\\), and\n\n\\[\n\\frac{v_x-v_y}{r_p}=\\frac{v_y}{r_n}.\n\\]\n\nThus the incremental current drawn by one inverter is\n\n\\[\ni_x^{(1)}=\\frac{v_x}{r_p+r_n},\n\\]\n\nand with three identical inverters in parallel,\n\n\\[\ni_x = 3\\, i_x^{(1)}\n\\quad\\Rightarrow\\quad\nR_X=\\frac{v_x}{i_x}\n=\\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right).\n\\]\n\nThat result is a **low-frequency small-signal resistance about the dc equilibrium**. The fact that this equilibrium is unstable and the ring will start oscillating does not by itself change that common-mode dc resistance. In the ideal small-signal model, the oscillatory mode has three node perturbations separated by \\(120^\\circ\\); their sum is zero, so that mode produces no net incremental supply current. A supply test excites the common mode.\n\nHowever, once the oscillator is actually running with finite amplitude, there is no single time-invariant operating point. The transistors are no longer “diode-connected”: the input and output of each inverter are at different points on the waveform, devices switch between cutoff/triode/saturation, and the small-signal parameters are periodic in time. The correct model is then a **linear periodically time-varying** one:\n\n\\[\n\\delta \\dot x = A(t)\\delta x + B(t)v_x(t),\\qquad\n\\delta i_x(t)=C(t)\\delta x+D(t)v_x(t),\n\\]\n\nwith \\(A,B,C,D\\) periodic at the oscillation frequency. Because a free-running oscillator has a neutral phase mode, supply perturbations can also change phase/frequency, produce sidebands, or injection-lock the oscillator. The port is then described by a frequency-dependent, possibly complex/active impedance, not by one real resistor.\n\nFor example, in a strongly switching CMOS ring oscillator, the average supply current is roughly\n\n\\[\n\\overline I_{DD}\\approx 3 C_L V_{DD} f_{\\text{osc}}(V_{DD}),\n\\]\n\nso a quasi-static incremental conductance is approximately\n\n\\[\n\\frac{d\\overline I_{DD}}{dV_{DD}}\n\\approx 3C_L\\left[f_{\\text{osc}}+V_{DD}\\frac{df_{\\text{osc}}}{dV_{DD}}\\right]\n\\]\n\nplus short-circuit-current terms, which is generally not equal to  \n\\(\\,3g_{mn}g_{mp}/(g_{mn}+g_{mp})\\).\n\nSo:\n\n- **For the dc/common-mode small-signal resistance at the symmetric bias point:** no, the formula is unchanged merely because the circuit is unstable and may oscillate.\n- **For the actual supply impedance of a running free-running oscillator:** yes, the simple \\(R_X\\) formula is not sufficient; one needs a periodic small-signal/harmonic-balance/PSS analysis and must specify the perturbation frequency and what is being averaged.",
        "format": "markdown",
        "sha256": "da3022fed239be750223c6de47a3e0cb934790868d49329b96649992f93b52ec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the oscillator’s capacitive supply-current mechanism, giving an average-current relation equivalent to a dynamic resistance of about 1/(3foscCL). But it does not show that this resistance remains on the order of the MOS on-resistance and is not much higher than the static estimate; instead, it emphasizes that the running oscillator’s impedance differs from the static formula.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2763,
        "output_tokens": 21297,
        "total_tokens": 24060,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20571,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2763,
        "output_tokens": 21297,
        "total_tokens": 24060,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20571,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the usual **pre-regeneration (initial) gain** of the StrongARM latch, increasing \\(W_7\\) **reduces the gain**, eventually approaching a limiting value.\n\nDuring evaluation, a wider \\(M_7\\) has lower on-resistance, pulling the tail node closer to ground. This increases \\(V_{GS}\\), current, and overdrive of \\(M_1\\)-\\(M_2\\). The initial differential gain is approximately\n\n\\[\nA_0 \\propto \\frac{g_{m1}}{I_{D1}}\n          \\simeq \\frac{2}{V_{OV1,2}},\n\\]\n\nmultiplied by threshold/capacitance factors. Since a larger tail current increases \\(V_{OV1,2}\\), \\(g_m/I_D\\) falls; in a square-law model \\(A_0\\propto 1/\\sqrt{I_{\\text{tail}}}\\).\n\nThus:\n\n- **Wider \\(M_7\\):** faster evaluation/latching, but **lower initial voltage gain**.\n- Once \\(M_7\\) behaves nearly as an ideal switch, further widening gives little additional change.\n- In weak inversion, \\(g_m/I_D\\) is nearly current-independent, so the gain changes much less.\n\nThe instantaneous differential charging slope at a fixed time can increase because \\(g_m\\) rises, but the net gain accumulated before regeneration begins decreases.",
        "format": "markdown",
        "sha256": "2e21b1e0dccc26ea2cf3c58ddcc698f519d936c0b8c77748eb47b64b560d9954"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that increasing M7 width raises tail current and reduces the initial gain, with a physically consistent gm/ID explanation. The additional caveats do not undermine the essential answer.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3996,
        "output_tokens": 21478,
        "total_tokens": 25474,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21199,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3996,
        "output_tokens": 21478,
        "total_tokens": 25474,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21199,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the usual strong-inversion, fixed-threshold analysis, **increasing \\(W_7\\) lowers the initial voltage gain**.\n\nA wider \\(M_7\\) supplies a larger tail current \\(I_T\\), so \\(P,Q,X,Y\\) discharge faster and the latch reaches regeneration sooner. The initial gain is roughly\n\n\\[\nA_{v0}\\sim \\frac{g_{m1}}{I_T}V_{\\text{sw}}\n          =\\frac{2V_{\\text{sw}}}{V_{OV1}},\n\\]\n\nwhere \\(V_{\\text{sw}}\\) is the approximately fixed voltage drop needed to start regeneration. Since\n\n\\[\nI_T\\propto W_7,\\qquad V_{OV1}\\propto \\sqrt{I_T},\n\\]\n\nthen\n\n\\[\nA_{v0}\\propto \\frac{1}{\\sqrt{W_7}} .\n\\]\n\nThus a wider \\(M_7\\) gives higher speed and power consumption, but less time for the input difference to be amplified, reducing \\(A_{v0}\\). The trend levels off when \\(M_7\\) no longer limits the tail current; in weak inversion the gain is nearly current-independent.\n\nA modeling caveat: some idealized treatments define an effective latch gain as  \n\\[\nA_0 \\approx \\frac{g_{m1}}{g_{m3}}\\sqrt{\\frac{C_X}{C_P}},\n\\]\nfor which both \\(g_m\\)’s scale with the same tail current and \\(W_7\\) cancels, giving an approximately constant gain. So under that definition, \\(W_7\\) mainly changes delay/power, not \\(A_0\\).",
        "format": "markdown",
        "sha256": "6dc93ec447ba4d87d1d666d9f15ae3c2ce175fa13ea8637cc0ec7b5a3f42780c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the required decreasing trend and explains it through increased tail current and the resulting reduction in gm/IT. The final caveat concerns a differently defined effective latch gain and does not change the answer for the initial integration gain asked here.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3904,
        "input_tokens": 3996,
        "output_tokens": 35983,
        "total_tokens": 39979,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3904,
        "input_tokens": 3996,
        "output_tokens": 35983,
        "total_tokens": 39979,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M7 is the clocked tail switch. Increasing its width lowers its on-resistance, pulls the common-source node of M1–M2 closer to ground, and therefore increases the tail current and the input-pair overdrive \\(V_{OV1,2}\\).\n\nAlthough \\(g_{m1,2}\\) increases, the preamplification interval\n\n\\[\nt_0 \\propto \\frac{C\\,V_{\\text{sw}}}{I_T}\n\\]\n\nbecomes shorter. The gain developed before regeneration is approximately\n\n\\[\nA_{v0}\\sim \\frac{g_{m1}}{I_D}V_{\\text{sw}}\n\\approx \\frac{2V_{\\text{sw}}}{V_{OV1,2}}\n\\]\n\nfor square-law devices. Hence, as \\(W_7\\) increases, \\(V_{OV1,2}\\) increases and the **initial voltage gain decreases**. The benefit is a shorter delay/faster latch, at the cost of more current and less suppression of latch offset. Once M7 is wide enough to behave nearly as an ideal switch to ground, the gain tends to level off.",
        "format": "markdown",
        "sha256": "ff4b02c25ea55ce1b83498bdf0d2e62a0de1273bc999eefd64908bce26407873"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that wider M7 decreases initial gain and explains this through increased tail current, higher input-pair overdrive, and reduced gm/ID. The extra timing and leveling-off comments do not change the essential conclusion.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3904,
        "input_tokens": 3996,
        "output_tokens": 27590,
        "total_tokens": 31586,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27366,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3904,
        "input_tokens": 3996,
        "output_tokens": 27590,
        "total_tokens": 31586,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27366,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(C_P\\) and \\(C_Q\\) are increased symmetrically while \\(C_X,C_Y\\) remain fixed, the **initial gain from \\(V_{\\text{in}}\\) to \\(V_X-V_Y\\) increases**, approximately in proportion to \\(C_P/C_X\\).\n\nDuring evaluation, the input-pair differential current \\(\\Delta I\\simeq g_m v_{id}\\) is integrated on \\(C_P,C_Q\\) until \\(P,Q\\) fall enough to turn on \\(M_3,M_4\\):\n\n\\[\nt_{\\rm int}\\simeq \\frac{C_P\\,\\Delta V_{\\rm on}}{I_0},\n\\]\n\nso the accumulated differential charge is\n\n\\[\n\\Delta Q_{PQ}\\simeq \\Delta I\\,t_{\\rm int}\n \\simeq g_m v_{id}\\frac{C_P\\Delta V_{\\rm on}}{I_0}.\n\\]\n\nWhen this charge is transferred to the output-node capacitances,\n\n\\[\n\\Delta V_{XY,0}\\simeq \\frac{\\Delta Q_{PQ}}{C_X},\n\\qquad\nA_0=\\frac{\\Delta V_{XY,0}}{v_{id}}\n \\simeq \\frac{g_m\\Delta V_{\\rm on}}{I_0}\\frac{C_P}{C_X}.\n\\]\n\nThus larger \\(P/Q\\) capacitances give a larger initial output difference and reduce the input-referred effect of latch mismatch/noise. The costs are a longer comparison delay, greater precharge energy, and possible gain saturation due to limited headroom. Also, \\(C_P\\) and \\(C_Q\\) must remain matched; otherwise an offset is introduced.\n\nNote that the differential **voltage at \\(P,Q\\)** at turn-on is approximately independent of \\(C_P\\); it is the differential **charge**, and hence the initial gain to \\(X,Y\\), that increases.",
        "format": "markdown",
        "sha256": "4cbe02decbf9445ccd5739de24c0fbaf7624c79d08b6d4fec23c27a2784b50cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recognizes that the longer integration time scales with capacitance and that the differential voltage at P and Q at turn-on is approximately unchanged. But it redefines the asked initial gain as a charge transfer to X/Y and concludes it increases; Razavi’s initial gain is across P/Q, where the capacitance cancels.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3995,
        "output_tokens": 17529,
        "total_tokens": 21524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17163,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3995,
        "output_tokens": 17529,
        "total_tokens": 21524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17163,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(C_P\\) and \\(C_Q\\) are increased symmetrically and the tail current is unchanged, the **initial differential gain at the onset of regeneration is essentially unchanged** to first order.\n\nDuring evaluation,\n\n\\[\n\\Delta I_{1,2}\\simeq g_{m1}v_{id},\\qquad\n\\frac{d(\\Delta V_{PQ})}{dt}\\simeq \\frac{\\Delta I_{1,2}}{C_P}.\n\\]\n\nThe cross-coupled devices \\(M_3,M_4\\) begin conducting after the common-mode voltage at \\(P,Q\\) falls by approximately \\(V_{TH3,4}\\), requiring\n\n\\[\nt_0 \\simeq \\frac{C_P V_{TH3,4}}{I_D},\n\\]\n\nwhere \\(I_D\\) is the current in one input branch. Hence the differential “seed” voltage is\n\n\\[\n\\Delta V_{PQ}(t_0)\n \\simeq \\frac{\\Delta I_{1,2}}{C_P}t_0\n =\\frac{\\Delta I_{1,2}}{I_D}V_{TH3,4},\n\\]\n\nso\n\n\\[\nA_0=\\frac{\\Delta V_{PQ}(t_0)}{v_{id}}\n \\simeq \\frac{g_{m1}}{I_D}V_{TH3,4}\n \\simeq \\frac{2V_{TH3,4}}{V_{OV1}},\n\\]\n\nwhich contains no \\(C_P\\).\n\nIncreasing \\(C_P,C_Q\\):\n\n- reduces the rate at which the differential voltage develops,\n- increases the time before \\(M_3,M_4\\) turn on by the same factor,\n- therefore leaves the initial gain approximately unchanged,\n- but increases comparator delay; it can reduce \\(kT/C\\) noise and kickback.\n\nIf gain is instead measured at a **fixed time** before latch turn-on, the voltage is smaller, proportional to \\(1/C_P\\). Unequal \\(C_P\\) and \\(C_Q\\) can also introduce offset.",
        "format": "markdown",
        "sha256": "db539427423274109b74535637f96f2f2c213e5140b1cd1a15d66b60d086e2f1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is essentially unchanged and shows the capacitance cancellation: the differential buildup slows in proportion to the increased time before regeneration. The added delay and secondary observations do not undermine the answer.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3904,
        "input_tokens": 3995,
        "output_tokens": 35684,
        "total_tokens": 39679,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35287,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3904,
        "input_tokens": 3995,
        "output_tokens": 35684,
        "total_tokens": 39679,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35287,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(C_P=C_Q=C_P\\) is increased while the capacitances at \\(X,Y\\) remain fixed, the **initial differential gain presented to the regenerative latch increases**, but the comparator becomes slower.\n\nDuring evaluation, the input-pair current difference is approximately\n\n\\[\n\\Delta I \\simeq g_m(V_{in1}-V_{in2}).\n\\]\n\nIt takes roughly\n\n\\[\nt_1 \\simeq \\frac{C_PV_{Tn}}{I_D}\n\\]\n\nfor \\(P,Q\\) to fall enough to turn on \\(M_3,M_4\\). A larger \\(C_P\\) lengthens this interval and increases the difference between the turn-on times of the two branches. The resulting charge difference is transferred to the smaller capacitances at \\(X,Y\\), giving a first-order initial gain of the form\n\n\\[\nA_{v0}\n=\\frac{\\Delta V_{XY,0}}{\\Delta V_{in}}\n\\sim\n\\frac{g_m}{I_D}\n\\left[\n\\frac{C_P}{C_X}V_{Tn}+|V_{Tp}|\n\\right],\n\\]\n\nwhere \\(C_X=C_Y\\). Thus \\(A_{v0}\\) increases approximately with \\(C_P/C_X\\) (often written as proportional to \\(1+C_P/C_X\\) when the threshold voltages are comparable).\n\nThe costs are:\n\n- longer preamplification and decision delay, roughly proportional to \\(C_P\\);\n- more charge and dynamic power needed for precharging;\n- longer required reset time;\n- eventually diminishing benefit as the input devices leave saturation or leakage/mismatch dominates.\n\nA useful distinction: the differential **voltage** at \\(P,Q\\) when \\(M_3,M_4\\) first turn on is approximately capacitance-independent,\n\n\\[\n\\Delta V_{PQ}\\approx \\frac{\\Delta I}{I_D}V_{Tn},\n\\]\n\nbut the differential **charge**, \\(C_P\\Delta V_{PQ}\\), grows with \\(C_P\\); when transferred to \\(C_X,C_Y\\), it produces a larger \\(X\\)-\\(Y\\) differential. Also, at a fixed time immediately after the clock edge, larger \\(C_P\\) reduces \\(d(\\Delta V)/dt\\); the gain increase refers to the differential existing at the natural onset of regeneration.",
        "format": "markdown",
        "sha256": "91780ae37a264a136d2c9f3c249000f77ed16d89492efe3b9ed51d4c2af3de9d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that the differential voltage at P and Q when regeneration begins is approximately independent of capacitance, and that larger capacitance slows the transient. But it then conflates that voltage gain with charge transferred to X/Y and concludes the initial gain increases, contrary to the requested P–Q gain, which remains approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3904,
        "input_tokens": 3995,
        "output_tokens": 27125,
        "total_tokens": 31120,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26671,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3904,
        "input_tokens": 3995,
        "output_tokens": 27125,
        "total_tokens": 31120,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26671,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**It is not monotonic; there is an optimum width.** For a normally sized StrongARM latch, making \\(M_5\\) and \\(M_6\\) much wider generally **degrades the total speed** or gives little improvement.\n\n- \\(M_5\\)-\\(M_6\\) are the cross-coupled PMOS latch devices. Before an output node falls by roughly \\(|V_{TP}|\\), they are off, and the pull-down current is set by \\(M_1,M_2,M_7\\), not by \\(W_{5,6}\\).\n- Increasing \\(W_{5,6}\\) adds gate, gate–drain, and drain diffusion capacitance to nodes \\(X\\) and \\(Y\\). Thus\n  \\[\n  \\frac{dV_X}{dt}\\approx \\frac{I_X}{C_X},\\qquad\n  t_{\\text{start}}\\approx \\frac{C_X(|V_{TP}|+V_{OV})}{I_X}\n  \\]\n  increase. It also makes the reset/precharge of \\(X,Y\\) slower.\n- Once the PMOS devices turn on, larger widths give larger \\(g_m\\) and can strengthen regeneration:\n  \\[\n  \\tau_{\\text{reg}}\\approx \\frac{C_{X,Y}}{G_{\\text{reg}}}.\n  \\]\n  If the PMOS pair is initially undersized, or \\(X,Y\\) have a large fixed external load, a modest width increase can therefore improve speed.\n- However, \\(C_{X,Y}\\) also increases with width. When device capacitance dominates, \\(g_m/C\\) is approximately constant—or can even worsen for a tail-current-limited bias—while the initial discharge delay has already increased.\n\nSo: **from very small widths, widening can help; beyond the width needed for reliable regeneration and full swing, further widening mainly adds capacitance and slows the comparator.** Minimum-to-moderate \\(M_5/M_6\\), optimized by transient simulation, is usually preferred.",
        "format": "markdown",
        "sha256": "42f77f458ab1f8c6d00352310ed9853a47a91655e8c192f055d93a87674a9c05"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the cross-coupled PMOS devices, their regenerative-strength benefit, and the eventual capacitance limit. But it emphasizes that widening usually slows the latch and treats an initial speed benefit as conditional; the expected trend is that widening initially improves speed because stronger regeneration outweighs the added capacitance.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3995,
        "output_tokens": 20641,
        "total_tokens": 24636,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20241,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3995,
        "output_tokens": 20641,
        "total_tokens": 24636,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20241,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It is **not monotonic**—there is an optimum size, and in a normally optimized StrongARM latch, making \\(M_5\\) and \\(M_6\\) still wider generally degrades the overall speed.\n\n- **During initial amplification**, \\(X\\) and \\(Y\\) are near \\(V_{DD}\\), so \\(M_5\\) and \\(M_6\\) are essentially off. Wider devices add gate and drain-junction capacitance to \\(X\\) and \\(Y\\), so \\(M_3/M_4\\) need longer to develop an output difference. They also increase the capacitance that \\(S_3/S_4\\) must recharge during reset.\n- **During regeneration**, wider \\(M_5/M_6\\) provide larger \\(g_m\\) and lower pull-up resistance, making the high-going output settle faster. If all capacitances were fixed, this effect would improve speed.\n\nA useful first-order description is\n\n\\[\nt_{\\text{initial}}\\sim \\frac{C_{X,Y}}{I_{3,4}},\n\\qquad\nt_{\\text{regen}}\\sim\n\\frac{C_{X,Y}}{g_{m,\\text{loop}}}\n\\ln\\!\\left(\\frac{\\Delta V_{\\text{final}}}{\\Delta V_0}\\right),\n\\]\n\nwith \\(C_{X,Y}\\) increasing roughly with \\(W_5,W_6\\), while \\(g_{m,\\text{loop}}\\) also increases. Thus the first delay grows while the regeneration delay initially shrinks, producing a U-shaped total delay versus width.\n\nSo:\n\n- From very small \\(M_5/M_6\\), a modest increase can improve speed.\n- Beyond the optimum, self-loading and contention dominate, and further widening degrades speed, often with little or no regeneration benefit.\n- They should be just large enough to restore the high output reliably, not arbitrarily large.\n\nIf the question ignores parasitic capacitance entirely, the simplified answer is “speed improves”; for the real clock-to-output delay, the practical answer is “there is an optimum, and excessive widening degrades it.”",
        "format": "markdown",
        "sha256": "cbad7263fb3c5dc7919b20b9c6f0320560c2dd7ff134acbaea9d6ffd6cf7fba0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It states that modest widening can initially improve speed by strengthening regeneration, while added capacitance eventually creates an optimum and can degrade speed beyond it. This matches the required trend and design conclusion.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3904,
        "input_tokens": 3995,
        "output_tokens": 18878,
        "total_tokens": 22873,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18457,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3904,
        "input_tokens": 3995,
        "output_tokens": 18878,
        "total_tokens": 22873,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18457,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For a properly sized StrongARM latch, widening \\(M_5\\) and \\(M_6\\) beyond a modest optimum generally **degrades the decision speed**, although there are two opposing effects.\n\n- **Initial evaluation phase:** \\(X\\) and \\(Y\\) start near \\(V_{DD}\\), so \\(M_5\\) and \\(M_6\\) are off until one output falls by about \\(|V_{TP}|\\). During this interval, wider PMOS devices contribute more gate, overlap, Miller, and drain-junction capacitance to \\(X\\) and \\(Y\\), but provide no additional current. Thus\n  \\[\n  \\frac{dV_X}{dt}\\approx-\\frac{I_X}{C_X},\\qquad\n  t_{\\text{initial}}\\approx \\frac{C_X |V_{TP}|}{I_X}\n  \\]\n  increases with \\(W_{5,6}\\).\n\n- **Regeneration phase:** Once a PMOS turns on, larger width raises \\(g_{m5,6}\\) and strengthens positive feedback, tending to reduce\n  \\[\n  \\tau_{\\text{reg}}\\approx \\frac{C_{X,Y}}{g_{m3,4}+g_{m5,6}} .\n  \\]\n  However, \\(C_{X,Y}\\) also increases roughly in proportion to \\(W_{5,6}\\), so this improvement is limited; \\(g_m/C_g\\) is approximately width-independent.\n\nHence the total delay often has a **U-shaped dependence on \\(W_{5,6}\\)**: increasing very small devices can help ensure reliable regeneration, but once they are adequately sized, further widening mainly adds capacitive loading and slows the latch. In practice, \\(M_5\\)–\\(M_6\\) are chosen near the smallest width that still guarantees robust latching across process corners.",
        "format": "markdown",
        "sha256": "9790cbbfcd55687f6017f0c77bdec1ea35a867b5a19786806b32ae970877432d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that wider M5/M6 strengthen regeneration and that added capacitance eventually limits speed, but it emphasizes degradation and claims their added capacitance slows the initial evaluation. The required trend is that widening initially improves speed because the added capacitance is not yet dominant; the answer therefore misses the central conclusion.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3904,
        "input_tokens": 3995,
        "output_tokens": 20263,
        "total_tokens": 24258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19896,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3904,
        "input_tokens": 3995,
        "output_tokens": 20263,
        "total_tokens": 24258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19896,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It **does not keep improving**. In a normally sized TSPC divider, making the clocked transistors wider usually **degrades the maximum speed**; at best, a small increase helps only until an optimum width is reached.\n\nReason:\n\n- Widening a clocked transistor reduces its on-resistance:  \n  \\[\n  R_{\\text{on}} \\propto \\frac{1}{W}\n  \\]\n  which looks like it should speed up charging/discharging of nodes \\(X\\) and \\(Y\\).\n\n- But its source/drain junction capacitances increase roughly as  \n  \\[\n  C_D,\\; C_S \\propto W\n  \\]\n  and these capacitances are connected to the dynamic nodes \\(X/Y\\) and to the internal nodes between the clocked and data transistors.\n\n- The clocked transistor’s own \\(R_{\\text{on}}C_D\\) product is approximately constant:\n  \\[\n  \\frac{1}{W}\\cdot W \\approx \\text{constant}\n  \\]\n  so widening does not significantly speed up its own diffusion-capacitance charging.\n\n- The extra capacitance must also be charged/discharged through the **nonclocked data transistors** such as \\(M_1\\), whose resistance was not reduced. This increases charge sharing and settling time at \\(X\\) and \\(Y\\).\n\n- The larger gate capacitance of the clocked devices also loads \\(CK/\\overline{CK}\\), slowing the clock edges if the clock driver has finite strength.\n\nA simple delay estimate has the form\n\n\\[\nt_d(W) \\approx \\frac{A}{W} + B W + \\text{const.}\n\\]\n\nSo there is an optimum \\(W\\). For \\(W\\) beyond that optimum, \\(B W\\) dominates and the delay increases. Therefore:\n\n\\[\n\\boxed{\\text{Widening the clocked transistors eventually degrades the speed.}}\n\\]\n\nThey should be sized near the optimum, often close to minimum or modest width, rather than made very large.",
        "format": "markdown",
        "sha256": "61090408d3ef4d3aef3be2ac6ec21ffbd9922936b77059ddacc7714b2e0570e0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It describes the key tradeoff: lower clocked-device on-resistance can improve speed for small widths, while added capacitance eventually limits or reverses the benefit, producing an optimum. Its claim that typical sizing may already be past the optimum is an unnecessary qualification, but it still states the required trend.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1740,
        "output_tokens": 20305,
        "total_tokens": 22045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19894,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1740,
        "output_tokens": 20305,
        "total_tokens": 22045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19894,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The speed does **not improve monotonically** when the clocked devices are widened. In a practical, already optimized C²MOS/TSPC divider, making them wider generally **degrades the maximum operating frequency**.\n\nFor a clocked transistor,\n\n\\[\nR_{\\rm on}\\propto \\frac{1}{W},\\qquad\nC_{db},C_{gd},C_g \\propto W .\n\\]\n\nThus widening it:\n\n- reduces its series resistance, which helps evaluation of \\(X\\) or \\(Y\\);\n- increases the diffusion/overlap capacitance at the dynamic nodes \\(X,Y\\) and at the internal stack nodes;\n- increases the CK/\\(\\overline{\\rm CK}\\) load, slowing clock edges and increasing the overlap/race interval between the two clocked stages;\n- increases clock feedthrough and charge injection into the floating nodes \\(X,Y\\).\n\nThe added capacitances must be charged or discharged through the fixed-width logic transistors \\(M_1\\) and the corresponding PMOS devices. A useful delay approximation is\n\n\\[\nt_{\\rm stage}\\approx t_0+\\frac{a}{W_{\\rm clk}}+bW_{\\rm clk},\n\\]\n\nwhere \\(a/W_{\\rm clk}\\) represents the reduced switch resistance and \\(bW_{\\rm clk}\\) the added self-loading. Hence there is an optimum \\(W_{\\rm clk}\\approx\\sqrt{a/b}\\).\n\nSo:\n\n- starting from very narrow clocked devices, a modest width increase can improve speed;\n- beyond the optimum, further widening increases delay, clock loading/feedthrough and race, so the speed degrades.\n\nWith an ideal zero-impedance clock and negligible parasitics, widening would always help; in the actual circuit it must be optimized rather than maximized.",
        "format": "markdown",
        "sha256": "c4b4aaa815371d604b1e347b8bc9907b3f3ffb184f0a14fb83de9636bd334a6f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It states that widening initially improves speed by reducing on-resistance, while added capacitance eventually limits or reverses the benefit at an optimum width. The extra discussion does not change this correct trend.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1740,
        "output_tokens": 24870,
        "total_tokens": 26610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24513,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1740,
        "output_tokens": 24870,
        "total_tokens": 26610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24513,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**There is an optimum width; increasing it does not improve speed indefinitely.** For a normally sized, practical implementation, making the clocked devices wider generally gives diminishing returns and eventually **degrades the maximum operating frequency**.\n\nEach evaluation path contains two series transistors: an input-controlled device and a clocked device. For example, the pull-down path at \\(X\\) is\n\n\\[\nX \\rightarrow \\text{clocked NMOS} \\rightarrow M_1 \\rightarrow GND .\n\\]\n\nIncreasing the clocked-device width \\(W\\) has two competing effects:\n\n- \\(R_{\\rm on}\\propto 1/W\\), so a very narrow clocked switch is made faster.\n- \\(C_{gs},C_{gd},C_{db},C_{sb}\\propto W\\), so:\n  - \\(CK\\) and \\(\\overline{CK}\\) are more heavily loaded and have slower edges;\n  - the capacitances at the dynamic nodes \\(X,Y\\) and at the internal charge-sharing nodes increase;\n  - clock feedthrough and channel-charge injection into the floating nodes increase.\n\nOnce \\(R_{\\rm on}\\) of the clocked device is smaller than that of the series input-controlled device, further widening mainly adds capacitance that the fixed-width device and clock buffer must drive. A rough evaluation delay has the form\n\n\\[\nt_{\\rm eval}\\sim \n\\underbrace{\\frac{k_1}{W}}_{\\text{lower }R_{\\rm on}}\n+\n\\underbrace{k_2 W}_{\\text{diffusion and clock loading}}\n+\\text{constant},\n\\]\n\nso it initially decreases and then increases with \\(W\\). Larger parasitic capacitances also worsen charge-sharing glitches at \\(X\\) and \\(Y\\), requiring longer settling times.\n\nThus:\n\n- Starting with severely undersized clocked transistors and an ideal, zero-impedance clock: widening them **can improve** speed.\n- In a real circuit with finite clock drive, or after the optimum size is reached: further widening **degrades** or at best does not improve \\(f_{\\max}\\), while increasing clock power.\n- If all parasitic and clock-gate capacitances are neglected—the simplified ideal model—the apparent answer is “improve” because only \\(R_{\\rm on}\\) is reduced, but that model misses the main high-speed limitation.\n\nSo the practical answer is: **do not blindly upsize them; size them near the optimum.**",
        "format": "markdown",
        "sha256": "59dcfa8e2b70f841eda4a134444ba12a7ea57515aead00e18a6a279682b53823"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by reducing the clocked devices’ on-resistance, while added node capacitance eventually limits or reverses the benefit, giving an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1740,
        "output_tokens": 25182,
        "total_tokens": 26922,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24687,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1740,
        "output_tokens": 25182,
        "total_tokens": 26922,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24687,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes—nominally, it is a divide-by-2 circuit that generates a quadrature pair**, provided the clocks are complementary with a 50% duty cycle and delays are matched.\n\nFor the polarities shown:\n\n- The left clocked inverter is transparent for \\(CK=1\\): \\(X=\\overline Z\\).\n- The right clocked inverter is transparent for \\(CK=0\\): \\(Y=\\overline X\\).\n- \\(\\mathrm{Inv}_3\\) gives \\(Z=\\overline Y\\).\n\nA possible state sequence is\n\n\\[\n\\begin{array}{c|ccc}\n &X&Y&Z\\\\ \\hline\nCK=1 &0&0&1\\\\\nCK=0 &0&1&0\\\\\nCK=1 &1&1&0\\\\\nCK=0 &1&0&1\\\\\nCK=1 &0&0&1\n\\end{array}\n\\]\n\nThus each node has period \\(2T_{CK}\\), i.e. \\(f_{\\text{out}}=f_{CK}/2\\). Node \\(X\\) changes on one clock edge, while \\(Y\\) and \\(Z\\) change on the opposite edge. The separation is\n\n\\[\n\\frac{T_{CK}}{2}=\\frac{T_{\\text{out}}}{4},\n\\]\n\ncorresponding to \\(90^\\circ\\). Therefore:\n\n- \\(X\\) and \\(Y\\) are in quadrature;\n- \\(X\\) and \\(Z\\) are also in quadrature, with the opposite lead/lag sign;\n- \\(Y\\) and \\(Z\\) are complementary, i.e. \\(180^\\circ\\) apart.\n\nAn additional inverter generating \\(\\overline X\\) would provide the full differential four-phase set \\(X,\\overline X,Y,\\overline Y\\).\n\nIn practice, quadrature accuracy is limited by CK duty-cycle error, CK/\\(\\overline{CK}\\) skew, \\(\\mathrm{Inv}_3\\) delay, and unequal output-buffer delays. For a high duty cycle \\(D\\), approximately\n\n\\[\n\\phi_{XZ}\\approx 180^\\circ D+\\frac{360^\\circ\\Delta t_d}{T_{\\text{out}}},\n\\]\n\nso \\(D=0.5\\) and \\(\\Delta t_d\\approx0\\) give the ideal \\(90^\\circ\\).",
        "format": "markdown",
        "sha256": "8fa7f2e6890ee3b409295cc5db32c4782b52a4d90b972cd01935bb319dc4b346"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature and notes that Inv3 delay can skew Z. However, it does not explain the other key departure: unequal loading of the two latch outputs, which makes their delays unequal.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1725,
        "output_tokens": 25960,
        "total_tokens": 27685,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25510,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1725,
        "output_tokens": 25960,
        "total_tokens": 27685,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25510,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—**ideally, this is a divide-by-2 circuit with quadrature-related outputs**, although practical delay and clock-duty-cycle errors must be considered.\n\nThe left clocked inverter is transparent when \\(CK=1\\), while the right one is transparent when \\(CK=0\\). Thus\n\n\\[\nCK=1:\\quad X=\\overline Z=Y,\\qquad Y \\text{ held},\n\\]\n\n\\[\nCK=0:\\quad Y=\\overline X,\\qquad Z=\\overline Y=X,\\qquad X \\text{ held}.\n\\]\n\nFor successive half-cycles:\n\n\\[\n\\begin{array}{c|cccc}\n &H_n&L_n&H_{n+1}&L_{n+1}\\\\ \\hline\nX&A&A&\\bar A&\\bar A\\\\\nY&A&\\bar A&\\bar A&A\\\\\nZ&\\bar A&A&A&\\bar A\n\\end{array}\n\\]\n\nThe state repeats after two clock periods, so\n\n\\[\nf_{\\text{out}}=\\frac{f_{CK}}{2},\\qquad T_{\\text{out}}=2T_{CK}.\n\\]\n\nNode \\(X\\) changes on one clock edge, while \\(Y\\) and \\(Z\\) change on the opposite edge. Their transition separation is\n\n\\[\n\\frac{T_{CK}}{2}=\\frac{T_{\\text{out}}}{4},\n\\]\n\nso \\(X\\) and \\(Y\\) are in quadrature; \\(Z\\simeq\\overline Y\\), hence \\(X\\) and \\(Z\\) are also a quadrature pair with the opposite phase sign. \\(Y\\) and \\(Z\\) themselves are approximately \\(180^\\circ\\) apart.\n\nPractical qualifications:\n\n- \\(CK/\\overline{CK}\\) must have a 50% duty cycle and negligible skew.\n- Both clocked-inverter delays must match; \\(X\\)-\\(Y\\) is therefore the best-matched pair.\n- \\(Inv_3\\) adds delay to \\(Z\\), so using \\(X\\)-\\(Z\\) requires a replica delay in the \\(X\\) path for accurate \\(90^\\circ\\) spacing.\n- The figure does not directly provide a complete four-phase \\(0^\\circ,90^\\circ,180^\\circ,270^\\circ\\) set: an additional inverter is needed to generate \\(\\overline X\\).\n\nThus, **yes as an ideal I/Q ÷2 structure; exact four-phase quadrature in hardware requires buffering and delay/duty-cycle matching.**",
        "format": "markdown",
        "sha256": "ab85fd3c47f72e9d27a0779e70563073701aba9e5735cc15f91ea965a9fc32c4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature and notes that Inv3 delays Z. It does not explain the other key departure: unequal loading of the two latch outputs, which can make X and Y non-quadrature; saying their delays must match does not identify that cause.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1600,
        "input_tokens": 1725,
        "output_tokens": 24313,
        "total_tokens": 26038,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23839,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1600,
        "input_tokens": 1725,
        "output_tokens": 24313,
        "total_tokens": 26038,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23839,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—**ideally, at the divided frequency \\(f_{CK}/2\\)**, the circuit produces a quadrature pair.\n\n- When \\(CK=1\\), the left clocked inverter is enabled and the right one holds:\n  \\[\n  Z=\\overline Y,\\qquad X=\\overline Z=Y.\n  \\]\n- When \\(CK=0\\), the right clocked inverter is enabled and the left one holds:\n  \\[\n  Y=\\overline X,\\qquad Z=\\overline Y=X.\n  \\]\n\nFor a 50%-duty-cycle clock, one possible state sequence is\n\n\\[\n\\begin{array}{c|cccc}\n & H_1 & L_1 & H_2 & L_2\\\\ \\hline\nX&1&1&0&0\\\\\nY&1&0&0&1\\\\\nZ&0&1&1&0\n\\end{array}\n\\]\n\nwhere each column is one half-cycle of \\(CK\\). Thus \\(X,Y,Z\\) have period \\(2T_{CK}\\): the circuit divides by two. \\(X\\) changes on rising edges of \\(CK\\), while \\(Y\\) and \\(Z\\) change on falling edges. The edge separation is\n\n\\[\n\\frac{T_{CK}}{2}=\\frac{1}{4}(2T_{CK}),\n\\]\n\ncorresponding to \\(90^\\circ\\) at \\(f_{CK}/2\\).\n\nHence:\n\n- \\(X\\) and \\(Z\\) are a quadrature pair;\n- \\(X\\) and \\(Y\\) are also a quadrature pair with the opposite polarity;\n- \\(Y=\\overline Z\\), so \\(Y\\) and \\(Z\\) are \\(180^\\circ\\) apart.\n\nTo obtain all four phases \\(0^\\circ,90^\\circ,180^\\circ,270^\\circ\\), one still needs \\(\\overline X\\).\n\nThis assumes a 50% duty cycle, negligible clock skew, and matched delays. For a clock duty cycle \\(D\\), the \\(X\\)-to-\\(Z\\) phase is approximately \\(180^\\circ D\\); therefore duty-cycle error and unequal propagation delays produce quadrature phase error.",
        "format": "markdown",
        "sha256": "b867420c074085518ea850aeb6c8b50fe85a19677c26540f5b4ebf585db423a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from the half-cycle edge spacing. It notes delay-related phase error, but does not explain both specific nonidealities: Inv3's delay skewing Z and unequal loading of the two latch outputs.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1600,
        "input_tokens": 1725,
        "output_tokens": 21552,
        "total_tokens": 23277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21126,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1600,
        "input_tokens": 1725,
        "output_tokens": 21552,
        "total_tokens": 23277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21126,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a C²MOS/TSPC-type toggle divider, so the effect is **not monotonic**.\n\n- For very narrow clocked transistors, increasing \\(W\\) reduces their on-resistance,\n  \\[\n  R_{\\text{on}}\\propto \\frac{1}{W},\n  \\]\n  and therefore reduces the delay of the pull-up/pull-down stack. Speed initially improves.\n\n- Once \\(R_{\\text{on}}\\) of the clocked device is small compared with the resistance of the data transistors, further widening gives little benefit. However, the parasitic capacitances continue to grow:\n  \\[\n  C_{\\text{internal}}\\approx C_0+c_jW,\\qquad C_{\\text{clock}}\\approx c_gW .\n  \\]\n  The larger junction capacitances at the internal nodes of the clocked inverters increase charge sharing and output glitches while a stage is opaque. They also increase the charge that must be restored during the next evaluation. In addition, the larger gate capacitance loads \\(CK\\) and \\(\\overline{CK}\\), slowing clock edges and increasing skew/overlap.\n\nA useful qualitative form is\n\n\\[\nt_d \\sim t_{\\text{core}}+\\frac{A}{W_{\\text{clk}}}+B\\,W_{\\text{clk}},\n\\]\n\nwhere the first term represents the reduced switch resistance and the last term the increased clock loading, diffusion capacitance, and charge-sharing penalty. Hence there is an optimum width.\n\nFor charge sharing specifically, if a high output with capacitance \\(C_o\\) is connected to an internal low node with capacitance \\(C_x\\),\n\n\\[\n\\Delta V_o \\approx V_{DD}\\frac{C_x}{C_o+C_x},\n\\]\n\nand \\(C_x\\) grows with the width of the clocked transistor.\n\n**Bottom line:** widening undersized clocked devices helps at first, but making them arbitrarily wide eventually gives little improvement and can degrade the maximum reliable operating frequency. If an ideal stiff clock and all parasitic effects are ignored, the delay merely improves and then saturates; the degradation is a real-circuit effect.",
        "format": "markdown",
        "sha256": "4b9355a62ac8c0aac1ef5264bcd0f5914458a610dc10e56994eefab22d3d2059"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the initial speed improvement from lower clocked-device resistance and describes charge sharing as a limit that can cause diminishing benefit or degradation at larger widths, matching the full-credit rule.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1750,
        "output_tokens": 23191,
        "total_tokens": 24941,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1750,
        "output_tokens": 23191,
        "total_tokens": 24941,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a C²MOS master–slave divider: the left clocked inverter is enabled for \\(CK=1\\), and the right one for \\(CK=0\\).\n\nWith an ideal, stiff clock, moderately increasing the width of the clocked transistors **improves the intrinsic speed**:\n\n- \\(R_{\\text{on}}\\propto 1/W\\), so the enabled C²MOS inverter charges/discharges its output faster.\n- Their larger drain-diffusion capacitance at the floating intermediate nodes increases charge sharing. In this divider, that charge-sharing step moves the held output toward the value it will take in the next clock phase, giving a useful “head start.”\n\nIf \\(C_X\\) is the intermediate-node capacitance and \\(C_Q\\) the output capacitance, the charge-sharing voltage is approximately\n\n\\[\nV_Q^+=\\frac{C_QV_Q^-+C_XV_{\\text{next}}}{C_Q+C_X},\n\\]\n\nso larger \\(C_X\\) gives a larger step toward \\(V_{\\text{next}}\\).\n\nHowever, wider devices also have \\(C_G\\propto W\\), which loads \\(CK\\) and \\(\\overline{CK}\\), slows their edges/skew, and can eventually cause excessive charge sharing or race-through. Moreover, \\(R_{\\text{on}}C_D\\) is nearly width-independent, so the improvement saturates.\n\n**Therefore:** with ideal clocks and moderate sizing, speed improves; in a real circuit there is an optimum width, and making the clocked transistors too wide eventually degrades the maximum operating frequency.",
        "format": "markdown",
        "sha256": "9859780d2738d07630af20897a6beccd7c469f5656e720df0e8be12c62a6bb80"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the required improve-then-optimum/degrade trend and identifies excessive charge sharing as a limit. The claimed useful “head start” from charge sharing is questionable, but the golden solution’s full-credit rule accepts this trend when charge sharing is named as a limiting effect.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1750,
        "output_tokens": 27302,
        "total_tokens": 29052,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26991,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1750,
        "output_tokens": 27302,
        "total_tokens": 29052,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26991,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It is **not monotonic**. There is an **optimum width** for the clocked transistors.\n\n- If the clocked devices are initially too narrow, increasing their width reduces their ON resistance, so the C²MOS/TSPC inverter stages evaluate faster. Speed improves.\n- But making them wider also increases:\n  - diffusion capacitance at the internal floating nodes,\n  - gate capacitance loading \\(CK\\) and \\(\\overline{CK}\\),\n  - clock feedthrough/charge injection,\n  - charge-sharing disturbances at the dynamic storage nodes.\n\nIn the opaque clock phase, the internal nodes near the clocked devices remain charged near \\(V_{DD}\\) or ground. If the input changes, charge sharing with the stored output node can move it toward the wrong logic level. Roughly,\n\n\\[\n\\Delta V \\approx V_{DD}\\frac{C_{\\text{clk}}}{C_{\\text{node}}+C_{\\text{clk}}},\n\\]\n\nand \\(C_{\\text{clk}}\\) increases with the clocked transistor width. So very wide clocked devices require more node capacitance or more settling time, and can slow the divider or even cause failure. Also slower clock edges due to larger gate capacitance can create overlap between transparent phases.\n\n**So:** starting from undersized devices, widening helps; beyond the optimum, further widening degrades the maximum speed. The clocked transistors should be sized just wide enough that their resistance is no longer the bottleneck, not made arbitrarily large.",
        "format": "markdown",
        "sha256": "4a3be8d2c52ea6f73ceb5c49bac8b4ff13213d1bc9eee0c9a71a12828e39d1e7"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says widening initially improves speed by lowering on-resistance, while charge sharing can limit performance at larger widths. This matches the golden solution’s full-credit rule.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 3229,
        "output_tokens": 34432,
        "total_tokens": 37661,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34133,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1750,
        "output_tokens": 19475,
        "total_tokens": 21225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19176,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the usual convention that a switch is closed when its control is 1, \\(S_{CK}\\) is closed for \\(CK=1\\) and \\(S_{\\overline{CK}}\\) is closed for \\(CK=0\\). With non-overlapping complementary clock phases, the circuit is a **dynamic toggle flip-flop**, i.e. a divide-by-2 frequency divider.\n\nLet:\n\n- \\(Q\\) be the rightmost inverter output, also the bottom feedback node,\n- \\(x\\) be the input of \\(\\mathrm{Inv}_1\\),\n- \\(y=\\overline{x}\\) be its output,\n- \\(z\\) be the input of the middle inverter.\n\nThe last two inverters are noninverting overall, so \\(Q=z\\).\n\n### Phase 1: \\(CK=1\\), \\(\\overline{CK}=0\\)\n\n- First switch closed; second open.\n- Thus \\(x=Q=z\\).\n- Inv\\(_1\\) precomputes \\(y=\\overline{Q}\\).\n- Node \\(z\\) is isolated by the open second switch, but its gate capacitance holds its value.\n\nIf \\(Q=Q_n\\) at the end of this phase,\n\n\\[\nx=z=Q_n,\\qquad y=\\overline{Q_n}.\n\\]\n\n### Phase 2: \\(CK=0\\), \\(\\overline{CK}=1\\)\n\n- First switch opens, so \\(x\\) retains \\(Q_n\\).\n- Second switch closes, so \\(z\\) is driven to \\(y=\\overline{Q_n}\\).\n- The final two inverters pass this value to the output:\n\n\\[\nQ_{n+1}=z=\\overline{Q_n}.\n\\]\n\nThus the output toggles on the falling edge of \\(CK\\) under this convention. On the next rising edge, \\(Q\\) is copied back into \\(x\\), setting up the next toggle, but \\(Q\\) itself does not change.\n\nTherefore,\n\n\\[\nQ_{n+1}=\\overline{Q_n},\\qquad\nf_Q=\\frac{f_{CK}}{2},\\qquad\nT_Q=2T_{CK}.\n\\]\n\nThe output has approximately 50% duty cycle. Its initial phase is arbitrary because there is no reset; startup charge or noise selects either \\(0,1,0,1,\\ldots\\) or \\(1,0,1,0,\\ldots\\). It is equivalent to a \\(T\\) flip-flop with \\(T=1\\).\n\n### Important practical qualifications\n\n- This is **dynamic storage**, not a static latch. The floating nodes \\(x\\) and \\(z\\) must retain charge on inverter-input capacitance. If the clock stops or the phases are too long, leakage can destroy the state.\n- Each switch-closed phase must be long enough to overwrite the relevant floating node and allow inverter propagation delays to settle.\n- The clock phases must be **non-overlapping**. If both switches conduct simultaneously, all three inverters form a closed ring. Since there are three inversions,\n\n\\[\nQ=\\overline{Q},\n\\]\n\nso no stable digital state exists; the circuit becomes a ring oscillator with period approximately\n\n\\[\nT_{\\text{ring}}\\approx 2(\\tau_1+\\tau_2+\\tau_3),\n\\]\n\nor \\(6\\tau\\) for three equal inverter delays. The final output phase may then be indeterminate. A brief interval in which both switches are open is preferable, provided the parasitic capacitances hold their charge.\n- Generating \\(\\overline{CK}\\) with a simple delayed inverter can create harmful overlap on one clock edge; a break-before-make, non-overlapping clock generator is normally required.\n\nIf the switch active polarity is reversed, the toggle moves to the other clock edge, but the ideal divide-by-2 behavior remains unchanged.",
        "format": "markdown",
        "sha256": "2b36607e3ec194d45caeb0a9d7e689ca4b94c1b4a866c9b9fa81253ec54850d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic toggle/divide-by-two circuit and explains that its output toggles once every two clock periods. The additional timing and implementation qualifications are not needed for full credit and do not undermine the central answer.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1122,
        "output_tokens": 21803,
        "total_tokens": 22925,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21052,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1122,
        "output_tokens": 21803,
        "total_tokens": 22925,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21052,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming each switch is closed when its control signal is high, this is a **two-phase dynamic feedback register**. With ideal nonoverlapping clocks it behaves as a toggling flip-flop, or divide-by-2 circuit.\n\n### Ideal operation\n\nLet\n\n- \\(Q\\): output of the rightmost inverter and signal on the feedback wire,\n- \\(A\\): input of \\(\\mathrm{Inv}_1\\),\n- \\(B\\): output of \\(\\mathrm{Inv}_1\\),\n- \\(C\\): input of the first of the two right-hand inverters.\n\nThen, after propagation delays,\n\n\\[\nB=\\overline A,\\qquad Q=C\n\\]\n\nbecause the two right-hand inverters form a non-inverting buffer.\n\n#### \\(CK=1\\)\n\n- \\(S_{CK}\\) is closed and \\(S_{\\overline{CK}}\\) is open.\n- \\(A=Q_n\\), hence \\(B=\\overline{Q_n}\\).\n- \\(C\\) is isolated and retains its charge, so \\(Q\\) remains \\(Q_n\\).\n\nThis phase computes and stores \\(\\overline{Q_n}\\) at \\(B\\).\n\n#### \\(CK=0\\)\n\n- \\(S_{CK}\\) opens; \\(A\\) retains \\(Q_n\\) on its input capacitance.\n- \\(S_{\\overline{CK}}\\) closes, forcing \\(C=B=\\overline{Q_n}\\).\n- After the delay of the last two inverters,\n\n\\[\nQ_{n+1}=\\overline{Q_n}.\n\\]\n\nThus the output changes once on every falling edge of \\(CK\\) under this polarity convention. On the next high phase, the new \\(Q\\) is sampled and its complement is prepared.\n\nFor example,\n\n\\[\nQ:\\quad 0,\\;1,\\;0,\\;1,\\;0,\\ldots\n\\]\n\nat successive active clock edges. Therefore,\n\n\\[\n\\boxed{f_Q=\\frac{f_{CK}}{2}}\n\\]\n\nand the circuit is equivalent to a \\(T\\) flip-flop with \\(T=1\\), or a master-slave D flip-flop with \\(D=\\overline Q\\). If the switches use active-low control, the toggle occurs on the opposite clock edge, but the divide ratio is unchanged.\n\n### Important practical qualifications\n\n- **Clock overlap:** If both switches are closed simultaneously, all three inverters form a closed loop with an odd number of inversions. The Boolean condition becomes \\(Q=\\overline Q\\), so there is no stable digital state; the circuit becomes a three-stage ring oscillator, approximately\n\n  \\[\n  T_{\\rm osc}=2(t_{d1}+t_{d2}+t_{d3})\n  \\]\n\n  or \\(6t_d\\) for identical inverter delays. It may also sit briefly at an unstable analog switching threshold. A delayed inverter used to generate \\(\\overline{CK}\\) can produce such overlap, so genuinely nonoverlapping, break-before-make clock phases are required.\n\n- **Dynamic storage:** When a switch opens, the adjacent inverter input is floating. Its parasitic gate capacitance stores the previous value. Leakage, charge injection, and clock feedthrough eventually corrupt it, so a short both-off interval is acceptable but a long one is not. Consequently, unlike a static flip-flop, this circuit has a practical minimum clock frequency.\n\n- **Settling time:** The high phase must be long enough for \\(S_{CK}\\), \\(\\mathrm{Inv}_1\\), and its input capacitance to settle; the low phase must be long enough for \\(S_{\\overline{CK}}\\) and the final two inverters to settle. Otherwise toggles can be missed.\n\n- **Startup:** There is no reset or data input. The initial charge on the floating nodes selects one of two equally valid output phases, so a reset is needed if a defined phase relative to \\(CK\\) is required.\n\nHence, under ideal nonoverlapping complementary clocking, the arrangement is a **dynamic divide-by-two/toggle circuit**; with clock overlap it degenerates into a three-inverter ring oscillator or an undefined/racing state.",
        "format": "markdown",
        "sha256": "8ce97db59cfd4d8e327c40e9d6c4dd6d8b48bade5280d1836e1040d1f88f6263"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic-latch feedback divide-by-two circuit: alternating clock phases produce a toggle output at half the input frequency. Additional implementation details do not undermine the essential answer.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1122,
        "output_tokens": 17760,
        "total_tokens": 18882,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16945,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1122,
        "output_tokens": 17760,
        "total_tokens": 18882,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16945,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume a switch is closed when its control is high, and that an isolated inverter input temporarily retains its previous voltage on its gate capacitance.\n\nLet \\(Q\\) be the output of the rightmost inverter, \\(B\\) the output of \\(\\mathrm{Inv}_1\\), and \\(C\\) the input of the two-inverter section. After settling,\n\n\\[\nQ=C,\\qquad B=\\overline{A},\n\\]\n\nwhere \\(A\\) is the input of \\(\\mathrm{Inv}_1\\).\n\n### \\(CK=1,\\ \\overline{CK}=0\\)\n\n- The \\(CK\\) switch is closed; the \\(\\overline{CK}\\) switch is open.\n- \\(A=Q\\), so \\(B=\\overline Q\\).\n- \\(C\\) is isolated and holds its charge, so \\(Q=C\\) remains unchanged.\n\nThus, during the high phase, \\(\\mathrm{Inv}_1\\) prepares the complement of the present output while the output is held.\n\n### \\(CK=0,\\ \\overline{CK}=1\\)\n\n- The \\(CK\\) switch opens and \\(A\\) retains the old \\(Q\\).\n- Therefore \\(B=\\overline{Q_{\\text{old}}}\\).\n- The \\(\\overline{CK}\\) switch closes, setting \\(C=B\\).\n- Since the last two inverters give a net non-inverting transfer, \\(Q=C\\), hence\n\n\\[\nQ_{\\text{new}}=\\overline{Q_{\\text{old}}}.\n\\]\n\nThe new \\(Q\\) cannot circulate back to \\(\\mathrm{Inv}_1\\), because the first switch is open.\n\n### Result\n\nThe output toggles once per clock period, on the \\(CK:1\\to0\\) transition under the stated switch convention:\n\n\\[\nQ_n = 0,1,0,1,\\ldots\n\\]\n\nat successive falling edges. Therefore\n\n\\[\n\\boxed{f_Q=\\frac{f_{CK}}{2}}\n\\]\n\nand the circuit is a dynamic master–slave-like toggle flip-flop, or divide-by-2 frequency divider. The initial output phase is arbitrary because there is no reset.\n\n### Switch-timing issues\n\n| Switch states \\(S_{CK},S_{\\overline{CK}}\\) | Behavior |\n|---|---|\n| \\(1,0\\) | Hold \\(Q\\); prepare \\(\\overline Q\\) at \\(\\mathrm{Inv}_1\\) |\n| \\(0,1\\) | Transfer \\(\\overline Q\\); toggle \\(Q\\) |\n| \\(0,0\\) | Both sections hold dynamically |\n| \\(1,1\\) | Dangerous: full three-inverter loop is closed |\n\nIf both switches conduct simultaneously, the complete loop has three—an odd number—of inversions. It has no stable digital state and becomes a three-inverter ring oscillator, with period approximately \\(6t_{pd}\\), or can enter metastability. A delayed inversion used to generate \\(\\overline{CK}\\) can therefore produce a short overlap and extra or unpredictable transitions. Practical implementations require non-overlapping, break-before-make clock phases.\n\nThe circuit is also dynamic: floating gate capacitance stores the state, so leakage limits how long a phase or stopped clock can be held. With opposite switch polarity, toggling occurs on the other clock edge, but the divide-by-2 function remains the same.",
        "format": "markdown",
        "sha256": "1d25daf799c3b1eb46027b1bde8dca0b1192edaff849eb4b8d362a5759df9137"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic master-slave-like divide-by-two circuit and explains that its output toggles once per input-clock period, giving half the clock frequency. The extra timing and switch discussion does not undermine the essential answer.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1122,
        "output_tokens": 19248,
        "total_tokens": 20370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18593,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1122,
        "output_tokens": 19248,
        "total_tokens": 20370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18593,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming each switch is closed when its control is high, this is the usual two-phase dynamic divide-by-2 circuit.\n\nLet \\(A\\) be the output of the rightmost inverter and \\(X\\) the output of \\(\\mathrm{Inv}_1\\) (also the red inverter output). The two rightmost inverters are non-inverting overall, so when the \\(\\overline{CK}\\) switch is closed, \\(A\\) eventually follows \\(X\\).\n\n### Without the red inverter\n\n- \\(CK=1\\): the left switch closes, sampling \\(A\\) into the input of \\(\\mathrm{Inv}_1\\), so \\(X=\\overline A\\). The right switch is open and \\(A\\) holds its previous value.\n- \\(CK=0\\): the left switch opens and stores the sampled value, while the right switch closes. The value at \\(X\\) propagates through the last two inverters, causing \\(A\\) to toggle.\n\nThus \\(A\\) toggles once per clock period:\n\n\\[\nf_A=\\frac{f_{CK}}{2}.\n\\]\n\n### What the red inverter does\n\nIt continuously generates \\(X_R=\\overline A\\), bypassing the \\(CK\\) switch and \\(\\mathrm{Inv}_1\\).\n\n- **When \\(CK=1\\):** the sampled input of \\(\\mathrm{Inv}_1\\) is also \\(A\\), so \\(\\mathrm{Inv}_1\\) and the red inverter produce the same logic level. They act as parallel drivers. This can reduce the delay at \\(X\\), provide stronger edges, and reduce sensitivity to switch resistance.\n- **When \\(CK=0\\):** the input of \\(\\mathrm{Inv}_1\\) holds the old value, while the red inverter follows the current \\(A\\). Together with the two rightmost inverters, it forms a three-inverter ring:\n  \\[\n  \\text{red inverter}\\rightarrow \\mathrm{Inv}_2\\rightarrow \\mathrm{Inv}_3\\rightarrow \\text{red inverter}.\n  \\]\n  Initially this regenerative path helps the desired output transition, but after \\(A\\) toggles, the red inverter and \\(\\mathrm{Inv}_1\\) want opposite values at \\(X\\).\n\nConsequently, if the red inverter is strong enough, the circuit can free-run or produce additional transitions whenever \\(CK\\) remains low too long. The clock then acts as an injection/synchronization signal: the circuit becomes a gated or injection-locked divider rather than a purely clock-driven dynamic divider.\n\nFor equal gate delays \\(t_d\\) and a 50% duty cycle, a rough timing requirement is that the \\(CK=0\\) interval be\n\n\\[\n2t_d \\lesssim \\frac{T_{CK}}{2} \\lesssim 3t_d,\n\\]\n\ni.e. long enough for one output transition but short enough to prevent a second one. This creates a finite operating-frequency window, approximately\n\n\\[\n\\frac{1}{6t_d}\\lesssim f_{CK}\\lesssim \\frac{1}{4t_d},\n\\]\n\nwith switch delays, loading, and device strengths shifting these limits.\n\n### Performance trade-offs\n\nThe red inverter can provide:\n\n- faster/steeper transitions at \\(X\\);\n- improved high-frequency regeneration and possibly lower jitter when strongly locked;\n- less dependence on the \\(CK\\)-switch delay.\n\nBut it also causes:\n\n- a minimum input-frequency limit and a finite lock range;\n- possible extra edges, metastability, or incorrect division for slow clocks;\n- contention and short-circuit current when its output disagrees with \\(\\mathrm{Inv}_1\\);\n- extra input/output capacitance, dynamic power, supply noise, and process/temperature sensitivity.\n\nAt transistor level, two full-strength CMOS inverter outputs cannot simply be shorted. One path is normally made weak, tri-stated, or deliberately sized as an injection path. A weak red inverter mainly acts as a speed-up/keeper; a strong one creates the self-oscillating behavior.\n\nSo the short answer is: **the red inverter turns the wideband dynamic divider into a regenerative/injection-locked divider—potentially faster and with sharper edges, but with a narrower frequency range and higher power/contention.**",
        "format": "markdown",
        "sha256": "5a5bdb47e46d5c628728a5138246ae6f8237fcc62b00ccdad568588ec3d53cfe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the red inverter’s feedforward bypass and speed benefit, and explains that its unclocked three-inversion loop can disrupt division at low clock rates, raising the minimum usable frequency. The additional timing estimates are qualified as rough and do not alter the essential conclusion.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 971,
        "output_tokens": 29553,
        "total_tokens": 30524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28713,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 971,
        "output_tokens": 29553,
        "total_tokens": 30524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28713,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(A\\) be the left/feedback node and \\(X\\) the output of \\(\\mathrm{Inv}_1\\). The red inverter is a **feed-forward/helper inverter** from \\(A\\) to \\(X\\), in parallel with the path \\(S_{CK}+\\mathrm{Inv}_1\\).\n\nAssuming the switches are active for the indicated clock level:\n\n- **When \\(S_{CK}\\) is closed:** the input of \\(\\mathrm{Inv}_1\\) is \\(A\\), so both it and the red inverter drive \\(X=\\overline A\\). Their drive currents add, reducing the effective output resistance and transition time at \\(X\\). Since the red inverter does not wait for the CK switch and \\(\\mathrm{Inv}_1\\), it can also pre-drive \\(X\\). This can:\n  - increase the maximum toggle/oscillation frequency,\n  - improve startup and edge slope,\n  - increase injection strength and locking range in an injection-locked divider.\n\n- **When \\(S_{CK}\\) is open:** the input of \\(\\mathrm{Inv}_1\\) is held dynamically at the old value \\(B\\), while \\(A\\) may change through the two downstream inverters. Then\n  \\[\n  X_{\\rm red}=\\overline A,\\qquad X_{\\mathrm{Inv}_1}=\\overline B,\n  \\]\n  which are generally opposite. Two full-strength CMOS inverters therefore contend at \\(X\\), causing:\n  - static short-circuit current and higher power,\n  - an intermediate or metastable voltage at \\(X\\),\n  - degraded noise margin, duty cycle and jitter/phase noise,\n  - possibly incorrect division or loss of oscillation.\n\n  For this reason the red inverter is normally made weak/skewed, tri-stated, or carefully timed so that one driver clearly wins.\n\nAlso, when \\(S_{\\overline{CK}}\\) is closed, the red inverter completes a direct three-inversion loop\n\\[\nA\\rightarrow I_{\\rm red}\\rightarrow X\\rightarrow \\mathrm{Inv}_2\\rightarrow \\mathrm{Inv}_3\\rightarrow A,\n\\]\nso it can sustain a ring oscillation; its delay and added capacitance shift the free-running frequency.\n\n**In short:** its intended benefit is faster switching, better startup and a wider locking/high-frequency range. The price is extra capacitance, device noise, and especially contention power and possible functional failure during the hold phase. An ordinary full-strength red inverter connected this way is generally unsafe; its sizing and clock timing are essential.",
        "format": "markdown",
        "sha256": "492b06923825c8646955bb1cb76881b4a70ad90058bd8aeb6cec8b17e3541aa0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the feedforward path, its high-speed benefit, and the potential loop/contention. However, it does not state the key low-frequency consequence: the unclocked branch can overpower the main path, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 971,
        "output_tokens": 21724,
        "total_tokens": 22695,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21215,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 971,
        "output_tokens": 21724,
        "total_tokens": 22695,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21215,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is not merely an extra load; it changes the loop topology.\n\nLet \\(A\\) be the output of the rightmost inverter and \\(B\\) the common output of \\(Inv_1\\) and the red inverter. Assume \\(CK\\) closes the left switch and \\(\\overline{CK}\\) closes the right switch.\n\n### Without the red inverter\n\nThe black circuit behaves as a dynamic, charge-storage divide-by-2 circuit:\n\n- \\(CK=1\\): \\(Inv_1\\) evaluates \\(B=\\overline A\\), but the right switch isolates \\(B\\) from the following inverters.\n- \\(CK=0\\): \\(Inv_1\\)'s input is held on its gate capacitance, while \\(B\\) drives the two-inverter chain. Since two inverters are non-inverting, \\(A\\) becomes equal to \\(B\\).\n\nConsequently \\(A\\) toggles once per complete \\(CK\\) period:\n\n\\[\nA_{n+1}=\\overline{A_n},\\qquad f_A \\simeq \\frac{f_{CK}}{2}.\n\\]\n\nIt is not self-oscillating; it depends on charge stored on floating inverter inputs.\n\n### With the red inverter\n\nDuring \\(CK=0\\), the red inverter, the second inverter and the third inverter form a continuous three-inversion loop:\n\n\\[\nA \\rightarrow Inv_{\\rm red}\\rightarrow Inv_2\\rightarrow Inv_3\\rightarrow A .\n\\]\n\nThus there is no stable DC solution and the circuit can self-start and free-run with approximately\n\n\\[\nf_0 \\approx \\frac{1}{2(t_{\\rm red}+t_2+t_3)}\n\\approx \\frac{1}{6t_{\\rm inv}}\n\\]\n\nfor equal delays. In an injection-locked or switched-ring-oscillator design, this free-running path allows \\(CK\\) to periodically correct/reset the oscillator phase, improving startup, robustness to leakage, weak-input sensitivity and possibly close-in jitter. It can also increase the slew rate at \\(B\\), since the red inverter and \\(Inv_1\\) drive in parallel when they agree.\n\n### Main penalties\n\nThere is a serious contention issue. When the \\(CK\\) switch opens, \\(Inv_1\\)'s input retains the previous value \\(A_{\\rm old}\\), while the red inverter sees the present value \\(A\\). Therefore their outputs are\n\n\\[\nInv_1:\\ \\overline{A_{\\rm old}}, \\qquad\nInv_{\\rm red}:\\ \\overline A .\n\\]\n\nOnce \\(A\\) toggles, these are opposite levels, yet the two CMOS outputs are shorted at \\(B\\). This can cause:\n\n- shoot-through or contention current and increased power;\n- supply/ground bounce and deterministic jitter;\n- reduced or uncertain slew rate and duty-cycle errors;\n- extra loading at \\(A\\) and \\(B\\), reducing maximum frequency;\n- burst oscillation or false toggling that can destroy the intended divide-by-2 operation.\n- additional device noise and supply sensitivity in the free-running loop.\n\nThus the net phase-noise/jitter benefit is not automatic: faster edges and periodic phase correction may reduce jitter, while contention and added supply noise may increase it.\n\nIn practice the red inverter is normally made weak as a keeper/feed-forward path, or it is tri-stated so that it does not fight \\(Inv_1\\). A weak version can improve startup and leakage tolerance with a modest power penalty; a full-strength, always-on version can turn the circuit into a self-oscillating ring and may degrade speed, power, phase noise and division correctness. Transistor-level transient/noise simulation is needed to determine the actual net performance.",
        "format": "markdown",
        "sha256": "e6114cca11ff9899198881a0838534a78f00360d72f9654e7d29302e17c3af78"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the unclocked ring path and contention with Inv1, but misses the feedforward bypass that improves high-speed operation and reverses the key low-frequency tradeoff: the branch can corrupt division and raise the minimum usable clock frequency, not cure leakage or improve startup.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 971,
        "output_tokens": 23529,
        "total_tokens": 24500,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22791,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 971,
        "output_tokens": 23529,
        "total_tokens": 24500,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22791,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The red inverter is **not cross-coupled with `Inv1`** and is not a conventional keeper.\n\nLabel the nodes:\n\n- \\(a\\): bottom feedback node, i.e. the output of the rightmost inverter,\n- \\(x\\): input of `Inv1`,\n- \\(b\\): output of `Inv1` and of the red inverter,\n- \\(y\\): input of the first inverter on the right.\n\nAssuming the switches conduct when their indicated clock is high:\n\n### \\(CK=1\\)\n\nThe \\(CK\\) switch is closed and the \\(\\overline{CK}\\) switch is open:\n\n\\[\nx=a.\n\\]\n\nConsequently, `Inv1` and the red inverter have the **same input** \\(a\\) and the **same output** \\(b\\). They are simply two parallel inverters, not a cross-coupled pair. The floating dynamic node in this phase is \\(y\\), on the far side of the open \\(\\overline{CK}\\) switch.\n\n### \\(CK=0\\)\n\nThe \\(CK\\) switch is open and the \\(\\overline{CK}\\) switch is closed. Now \\(x\\) is the floating storage node. The red inverter closes the path\n\n\\[\na \\rightarrow \\text{red inverter} \\rightarrow b\n\\rightarrow \\text{Inv2} \\rightarrow \\text{Inv3} \\rightarrow a .\n\\]\n\nThat loop contains **three inversions**, so it is an odd-inversion, astable/ring-type feedback path—not the two-inversion bistable loop of a cross-coupled latch. `Inv1` also drives \\(b\\) from the previously stored value on \\(x\\), so in a real implementation the red inverter must be weak, tri-stated, or otherwise ratioed against `Inv1`; two equally strong inverters can contend when \\(a\\neq x\\).\n\n## What the red inverter actually does\n\nIt is a **bypass or look-ahead inverter**: it provides a direct \\(b=\\overline a\\) path that remains available when the \\(CK\\) switch opens. With the \\(\\overline{CK}\\) switch closed, this bypass closes a three-inverter loop with the two right-hand inverters. Depending on device sizing and the intended application, that path:\n\n- forces the required switching/regenerative transition,\n- provides oscillator/self-starting feedback, or\n- supports injection locking in a self-oscillating divider.\n\nA weak version can also help suppress charge-sharing or switching glitches at \\(b\\), but that is still not static latch storage.\n\n## Why it does not remove the leakage limit as a keeper\n\nThe charge-storing nodes are \\(x\\) and \\(y\\). The red inverter is connected to \\(a\\) and \\(b\\):\n\n- when \\(x\\) is floating, it is isolated by the open \\(CK\\) switch;\n- when \\(y\\) is floating, it is isolated by the open \\(\\overline{CK}\\) switch.\n\nThus the red inverter supplies no DC restoration path to either floating node. Leakage can still corrupt the stored state if a clock phase is held too long. A proper keeper with `Inv1` would be an inverter from \\(b\\) **back to \\(x\\)**—the opposite orientation—so that `Inv1` and the feedback inverter formed a two-inverter latch.\n\nIf such a circuit does tolerate a very low clock frequency, that is because the red path makes it **self-oscillating or self-starting**, not because it statically holds the old bit.",
        "format": "markdown",
        "sha256": "13806dd2cbb4c9941398cfdc54d96a4b8707ab4d3227230f7f81803196f083a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the bypass/feedforward path and its three-inversion loop. However, it misses the central tradeoff: the branch can speed high-frequency operation but overpower the intended latch at low clock rates, raising the minimum usable frequency; its self-starting/low-frequency explanation is misleading.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1014,
        "output_tokens": 43168,
        "total_tokens": 44182,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1014,
        "output_tokens": 43168,
        "total_tokens": 44182,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. That description is topologically incorrect and overstates what the added inverter does.\n\nLet\n\n- \\(A\\) be the left/feedback node and red-inverter input,\n- \\(X\\) be the input of \\(\\mathrm{Inv}_1\\),\n- \\(B\\) be the common output node of \\(\\mathrm{Inv}_1\\) and the red inverter.\n\nWhen the \\(CK\\) switch is closed, \\(A=X\\). Thus \\(\\mathrm{Inv}_1\\) and the red inverter both invert \\(A\\) and drive \\(B\\): they are **parallel inverters**, not cross-coupled inverters. When the \\(CK\\) switch is open, \\(X\\) is floating and there is no feedback path from \\(B\\) back to \\(X\\). A genuine cross-coupled latch would require an inverter from \\(B\\) back to \\(X\\).\n\nAlso, the leakage-sensitive dynamic nodes are \\(X\\) and the input of the first black inverter after the \\(\\overline{CK}\\) switch. The red inverter drives neither of those nodes when they are isolated, so it is not a DC keeper and does not make the flip-flop static.\n\n### What it actually does\n\nThe red inverter bypasses the \\(CK\\) switch and \\(\\mathrm{Inv}_1\\). In the phase where the \\(\\overline{CK}\\) switch is closed, there is a loop\n\n\\[\nA \\xrightarrow{\\text{red inv}} B\n  \\xrightarrow{\\overline{CK}\\text{ switch}}\n  \\mathrm{Inv}_2 \\to \\mathrm{Inv}_3 \\to A .\n\\]\n\nThis loop contains **three inversions**, so it has no stable DC state: after one loop delay, \\(A\\) becomes \\(\\bar A\\). It is therefore a three-inverter **ring oscillator**. Practical implementations size or gate the devices so that the red path can dominate any contention from \\(\\mathrm{Inv}_1\\).\n\nThe applied clock periodically interrupts, samples, or injects into this oscillator. The result is a **self-oscillating, injection-locked frequency divider**: it has a free-running frequency \\(f_0\\), and a clock near \\(2f_0\\) locks the output to \\(f_0=f_{CK}/2\\).\n\nConsequently:\n\n- Leakage may no longer cause a completely dead circuit, because the oscillator continually refreshes/drives the nodes.\n- But this is not static operation down to DC. Below the injection-locking range the output free-runs at approximately its natural frequency, rather than at \\(f_{CK}/2\\); isolated nodes can still leak during clock phases where the loop is broken.\n- A true leakage keeper would require weak feedback around the floating storage nodes—e.g. an inverter from \\(B\\) back to \\(X\\)—which is not what is drawn.\n\nSo the red inverter’s intended role is to create an odd-inversion, self-oscillating loop for injection-locked division, not to form a keeper latch with \\(\\mathrm{Inv}_1\\).",
        "format": "markdown",
        "sha256": "a825c4ca016dc1788565c3b93e779b41df74f869ab2f28b28a7dd980edea0660"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter as a feedforward path bypassing the CK switch and Inv1, with a three-inversion loop. However, it substitutes a speculative injection-locking account for the key tradeoff: the branch can speed high-rate operation but overpower the intended latch at low rates, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 1014,
        "output_tokens": 28727,
        "total_tokens": 29741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 1014,
        "output_tokens": 28727,
        "total_tokens": 29741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The red inverter and \\(Inv_1\\) do **not** form a cross-coupled latch.\n\nLet\n\n- \\(X\\) be the output of the rightmost inverter / input of the red inverter / left side of the \\(CK\\) switch,\n- \\(Y\\) be the input of \\(Inv_1\\),\n- \\(Z\\) be the common output of \\(Inv_1\\) and the red inverter,\n- \\(W\\) be the input of the first inverter after the \\(\\overline{CK}\\) switch.\n\nWhen the \\(CK\\) switch is closed, \\(X=Y\\), so both \\(Inv_1\\) and the red inverter compute\n\n\\[\nZ=\\overline{X}.\n\\]\n\nTheir inputs are tied together through the switch and their outputs are already tied together: they are **parallel inverters**, not inverters connected head-to-tail. When the \\(CK\\) switch opens, there is no feedback path through \\(Inv_1\\); its input \\(Y\\) is simply floating. A real keeper would be a weak inverter from \\(Z\\) back to \\(Y\\).\n\n### What the red inverter actually does\n\nIt is a clock-independent feedback/precharge path that forces \\(Z\\approx\\overline X\\) even while the \\(CK\\) switch is open. When the \\(\\overline{CK}\\) switch is closed, the path\n\n\\[\nZ \\rightarrow Inv_2 \\rightarrow Inv_3 \\rightarrow X\n\\rightarrow \\text{red inverter} \\rightarrow Z\n\\]\n\ncontains three inversions. Depending on inverter strengths, this is a gated three-inverter ring oscillator or a ratioed feedback path in which one inverter is weak and can be overpowered by \\(Inv_1\\). Thus the red inverter is used to precharge/self-reset or sustain/injection-lock a transition and to keep \\(Z\\) from being determined solely by a floating gate. It is often described as a feedback or “bleeder” inverter in a self-oscillating divider—not as a storage keeper.\n\nIf both inverters are full-strength CMOS gates, tying their outputs also causes contention whenever their inputs differ; one inverter must be weak or effectively tri-stated.\n\n### The leakage limit is not eliminated\n\nThe nodes \\(Y\\) and \\(W\\) are still isolated by switches during alternate clock phases and store their logic levels on gate capacitance:\n\n- \\(Y\\) floats when the \\(CK\\) switch is open;\n- \\(W\\) floats when the \\(\\overline{CK}\\) switch is open.\n\nThe red inverter cannot restore charge on either node because an open switch separates it from them. Leakage can therefore still change the stored state if a clock phase is too long. A genuinely static version would require weak feedback around each dynamic latch—for example, a weak inverter from \\(Z\\) back to \\(Y\\).\n\nA self-oscillating/injection-locked implementation may avoid the particular “wait until a dynamic node leaks” failure and lower the leakage-limited operating frequency, but it does not become a static latch and does not operate unconditionally down to DC; the lower bound is then set by loop behavior and locking range.\n\nSo the quoted answer is wrong both about the topology and, in the usual sense, about eliminating the minimum-clock-frequency constraint.",
        "format": "markdown",
        "sha256": "91332cca69b298b13707196926895c53d13ada430404ba01f4efb94af9b95df8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and recognizes the three-inversion loop, but mischaracterizes the red inverter’s main role: it is a feedforward branch bypassing the CK switch and Inv1. The answer also misses the key tradeoff and suggests the branch may lower the leakage-limited frequency, whereas at low clock rates it can overpower the intended latch behavior and raise the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 1014,
        "output_tokens": 37257,
        "total_tokens": 38271,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36597,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 896,
        "input_tokens": 1014,
        "output_tokens": 37257,
        "total_tokens": 38271,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36597,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(C_1\\) is a short at the frequency of interest and the source resistance is \\(R_S=50~\\Omega\\). Combine the two devices as\n\n\\[\nG_m=g_{m1}+g_{m2},\\qquad \nr_o=r_{o1}\\parallel r_{o2}\\;(\\parallel R_L\\text{ if a load is present}),\n\\]\n\nand define the total MOS drain-noise conductance\n\n\\[\nG_{nd}=\\gamma_1 g_{m1}+\\gamma_2 g_{m2}\\equiv \\gamma_{\\rm eff}G_m .\n\\]\n\n## 1. The \\(50~\\Omega\\) constraint\n\nA small-signal test at the input gives\n\n\\[\nR_{\\rm in}=\\frac{R_F+r_o}{1+G_mr_o}.\n\\]\n\nTherefore, imposing \\(R_{\\rm in}=R_S=50~\\Omega\\),\n\n\\[\n\\boxed{R_F=R_S+r_o(G_mR_S-1)}\n\\]\n\nor, in normalized form,\n\n\\[\nf\\equiv \\frac{R_F}{R_S}=1+\\frac{r_o}{R_S}(y-1),\n\\qquad y\\equiv G_mR_S .\n\\]\n\nThus \\(R_F\\) is not a free variable: if \\(G_m\\) or \\(r_o\\) is changed, \\(R_F\\) must be changed to preserve the \\(50~\\Omega\\) match. For useful gain we need \\(R_F>R_S\\), hence approximately \\(G_mR_S>1\\), and also \\(G_mR_F>1\\).\n\n---\n\n## 2. Noise factor\n\nIgnoring gate-induced noise, capacitances and noise from the following stage, the three relevant noise sources are\n\n\\[\n\\overline{v_{n,S}^2}=4kTR_S,\\qquad\n\\overline{i_{n,F}^2}=\\frac{4kT}{R_F},\\qquad\n\\overline{i_{n,d}^2}=4kT\\,G_{nd}.\n\\]\n\nA nodal noise calculation at the input and output nodes gives the noise factor\n\n\\[\n\\boxed{\nF =\n1+\n\\frac{\nf(1+y)^2+\\gamma_{\\rm eff}\\,y(1+f)^2\n}{\n(fy-1)^2\n}}\n\\]\n\nwhere \\(f=R_F/R_S\\), \\(y=G_mR_S\\), and \\(fy=G_mR_F\\). The NF in dB is \\(10\\log_{10}F\\).\n\nUsing the matching constraint,\n\n\\[\nf=1+r(y-1),\\qquad r=\\frac{r_o}{R_S},\n\\]\n\nso \\(F\\) becomes a function of essentially one design variable, \\(G_m\\) or equivalently \\(y\\).\n\nFor \\(R_F\\gg R_S\\) and \\(G_mR_F\\gg1\\),\n\n\\[\nF\\simeq\n1+\n\\frac{\\gamma_{\\rm eff}}{G_mR_S}\n+\n\\frac{(1+G_mR_S)^2}\n{(G_mR_S)^2(R_F/R_S)} .\n\\]\n\nIf additionally \\(G_mR_S\\gg1\\),\n\n\\[\n\\boxed{\nF\\simeq\n1+\n\\frac{\\gamma_{\\rm eff}}{G_mR_S}\n+\n\\frac{R_S}{R_F}\n\\approx\n1+\n\\frac{\\gamma_{\\rm eff}}{G_mR_S}\n+\n\\frac{1}{G_mr_o}\n}\n\\]\n\nbecause \\(R_F\\approx R_SG_mr_o\\).\n\nThis expression shows the two main noise mechanisms:\n\n- \\(\\gamma_{\\rm eff}/(G_mR_S)\\): MOS channel noise; reduce it by increasing total \\(G_m\\).\n- \\(R_S/R_F\\approx 1/(G_mr_o)\\): feedback-resistor noise; reduce it by increasing the intrinsic gain \\(G_mr_o\\) and hence \\(R_F\\).\n\n---\n\n## 3. What the optimization actually means\n\nThere is no unconstrained interior “optimum”: in the ideal thermal-noise model, increasing \\(G_m\\) and \\(G_mr_o\\), and increasing \\(R_F\\) according to\n\n\\[\nR_F=R_S+r_o(G_mR_S-1),\n\\]\n\nmonotonically lowers \\(F\\). In the limit \\(G_m\\to\\infty\\), \\(F\\to1\\), but that is not physically realizable because of power, voltage headroom, gain, bandwidth, stability and device parasitics.\n\nSo the practical optimum is at the boundary of the allowed constraints:\n\n1. **Choose the largest \\(G_m\\) allowed by the bias current.**  \n   Use \\(g_m/I_D\\) sizing; moderate/weak inversion gives more \\(G_m\\) per mA. Size NMOS and PMOS so both contribute strongly to \\(G_m=g_{mn}+g_{mp}\\).\n\n2. **Maximize \\(r_o\\), or more generally \\(G_mr_o\\).**  \n   Longer-channel devices, cascoding or gain boosting help, but cost headroom and bandwidth. A larger \\(G_mr_o\\) permits a larger \\(R_F\\) for the same \\(50~\\Omega\\) input resistance.\n\n3. **Set \\(R_F\\) from the matching equation.**  \n   Make \\(R_F\\gg50~\\Omega\\) if possible. Large \\(R_F\\) lowers its noise contribution, but closed-loop gain is roughly\n\n   \\[\n   \\frac{v_o}{v_s}\\approx \\frac{1-R_F/R_S}{2},\n   \\]\n\n   so linearity, output swing, bandwidth and stability eventually limit how large \\(R_F\\) can be.\n\n4. **Include RF nonidealities.**  \n   At high frequency, include \\(C_{gs}\\), \\(C_{gd}\\), gate-induced noise and its correlation with drain noise, finite \\(Q\\) of any matching components, and the load noise. These effects often create a finite optimum transistor width. Use a sweep/noise simulation over \\(W_{1,2}\\), bias current and \\(R_F\\), enforcing \\(R_{\\rm in}=50~\\Omega\\) at every point.\n\n---\n\n### Important special case\n\nIf \\(r_o\\to\\infty\\), the matching condition forces \\(G_mR_S\\to1\\). Then, for large \\(R_F\\),\n\n\\[\nF \\to 1+\\gamma_{\\rm eff},\n\\]\n\nabout \\(2.2~\\mathrm{dB}\\) for \\(\\gamma=2/3\\). To go below this limit, use \\(G_mR_S>1\\); the required extra transconductance must be accompanied by larger \\(R_F\\) and sufficiently large intrinsic gain \\(G_mr_o\\).\n\nIf only the **external port** must be \\(50~\\Omega\\), a lossless L-network/transformer can present the LNA’s noise-optimum source impedance while giving \\(50~\\Omega\\) at the connector. Avoid a lossy resistive pad, since it directly worsens NF.",
        "format": "markdown",
        "sha256": "51d18889f3f0c6f6df0a969adc2e4d1a9f0303101213dbba1254092bbc145a4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It uses the finite-output-resistance match relation, explains that gm can exceed 1/Rs with RF adjusted to keep Rin at 50 Ω, and shows how this lets NF fall below 1 + γ. This satisfies the full-credit rule.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2076,
        "output_tokens": 50303,
        "total_tokens": 52379,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 48943,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2076,
        "output_tokens": 50303,
        "total_tokens": 52379,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 48943,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume midband operation, so \\(C_1\\) is an AC short, and neglect gate-induced and gate-resistance noise. Define\n\n\\[\ng_m=g_{m1}+g_{m2},\\qquad \nr_o=r_{o1}\\parallel r_{o2},\\qquad\n\\gamma_{\\rm eff}=\n\\frac{\\gamma_1g_{m1}+\\gamma_2g_{m2}}{g_m}.\n\\]\n\nThe source resistance is \\(R_S=50~\\Omega\\).\n\n## 1. The 50-\\(\\Omega\\) constraint\n\nFrom the small-signal circuit,\n\n\\[\nR_{\\rm in}=\\frac{R_F+r_o}{1+g_m r_o}.\n\\]\n\nTherefore \\(R_{\\rm in}=R_S\\) requires\n\n\\[\n\\boxed{R_F=R_S(1+g_mr_o)-r_o\n      =R_S+r_o(g_mR_S-1)} .\n\\]\n\nThus \\(g_m\\) and \\(R_F\\) cannot be optimized independently. If \\(r_o\\gg R_F\\), this reduces to the familiar result\n\n\\[\nR_{\\rm in}\\simeq \\frac{1}{g_m},\\qquad\ng_m\\simeq \\frac{1}{R_S}=20~{\\rm mS}.\n\\]\n\n## 2. Noise factor under the matching constraint\n\nLet\n\n\\[\nx=g_mR_S,\\qquad y=\\frac{R_S}{R_F},\\qquad \n\\frac{y}{x}=\\frac{1}{g_mR_F}.\n\\]\n\nIncluding thermal noise of \\(R_F\\),\n\n\\[\n\\overline{v_{n,F}^2}=4kTR_F,\n\\]\n\nand the combined MOS channel-noise current,\n\n\\[\n\\overline{i_{n,d}^2}=4kT\\gamma_{\\rm eff}g_m,\n\\]\n\nthe noise factor is\n\n\\[\n\\boxed{\nF=\n1+\n\\frac{\ny\\left(1+\\frac1x\\right)^2\n+\\dfrac{\\gamma_{\\rm eff}}{x}(1+y)^2\n}{\n\\left(1-\\dfrac{y}{x}\\right)^2\n}}\n\\]\n\nand \\(NF=10\\log_{10}F\\).\n\nFor \\(g_mR_F\\gg1\\),\n\n\\[\nF\\simeq\n1+\n\\underbrace{\\frac{R_S}{R_F}\n\\left(1+\\frac{1}{g_mR_S}\\right)^2}_{\\text{feedback-resistor noise}}\n+\n\\underbrace{\\frac{\\gamma_{\\rm eff}}{g_mR_S}\n\\left(1+\\frac{R_S}{R_F}\\right)^2}_{\\text{MOS channel noise}} .\n\\]\n\nThe first term is reduced by increasing \\(R_F\\); the second by increasing \\(g_m\\).\n\nUsing the exact matching condition,\n\n\\[\n\\frac{R_F}{R_S}\n=\n1+\\frac{r_o}{R_S}(x-1),\n\\qquad\ny(x)=\\frac{R_S/r_o}{R_S/r_o+x-1}.\n\\]\n\nHence the optimization is\n\n\\[\n\\min_x F\\!\\left[x,y(x)\\right].\n\\]\n\nFor the ideal model above, this expression has no finite unconstrained minimum: increasing \\(g_m\\) and increasing \\(R_F\\) according to the matching equation reduces the NF. The optimum therefore occurs at a practical constraint boundary—available current, device width, \\(f_T\\), bandwidth, stability, linearity, or gain.\n\n## 3. Useful limiting cases\n\n### Low-power case, \\(r_o\\gg R_F\\)\n\nHere \\(g_m\\approx 1/R_S\\) is essentially fixed. Making \\(R_F\\) as large as practical gives\n\n\\[\n\\boxed{F_{\\min}\\rightarrow 1+\\gamma_{\\rm eff}}.\n\\]\n\nFor long-channel devices with \\(\\gamma_{\\rm eff}=2/3\\),\n\n\\[\nNF_{\\min}\\approx 10\\log_{10}(5/3)=2.22~{\\rm dB}.\n\\]\n\nFinite \\(R_F\\), finite \\(r_o\\), gate resistance, and induced gate noise raise this value.\n\n### Larger \\(g_m\\), with approximately fixed intrinsic gain \\(A_0=g_mr_o\\)\n\nThe matching condition becomes\n\n\\[\n\\frac{R_F}{R_S}=1+A_0-\\frac{A_0}{g_mR_S}.\n\\]\n\nAs \\(g_mR_S\\rightarrow\\infty\\),\n\n\\[\n\\boxed{F\\rightarrow 1+\\frac{1}{1+A_0}},\n\\qquad\nNF\\rightarrow10\\log_{10}\\!\\left(1+\\frac{1}{1+A_0}\\right).\n\\]\n\nThus a large intrinsic gain also helps, but the improvement requires more bias current and eventually becomes limited by parasitics.\n\n## 4. Practical optimization procedure\n\n1. At the allowed current, maximize \\(g_m/I_D\\) by using low-overdrive or subthreshold-biased devices; exploit the complementary inverter so \\(g_{m1}+g_{m2}\\) is available from the same DC current.\n2. Minimize \\(\\gamma_{\\rm eff}\\). If \\(\\gamma_1\\neq\\gamma_2\\), allocate more of the required \\(g_m\\) to the device with the lower noise factor; if \\(\\gamma_1\\approx\\gamma_2\\), only \\(g_{m1}+g_{m2}\\) matters in this simplified model.\n3. For each candidate \\(g_m\\) and \\(r_o\\), set\n   \\[\n   R_F=50(1+g_mr_o)-r_o.\n   \\]\n4. Evaluate \\(F\\), gain, bandwidth, stability, linearity, and \\(S_{11}\\); sweep \\(g_m\\), device widths, and bias.\n5. At RF, include \\(C_{gs}\\), gate-induced noise, and the complex \\(Y_{\\rm opt}\\). A 50-\\(\\Omega\\) power match is not automatically a noise match; a lossless input network or transformer may be needed to present \\(\\Gamma_{\\rm opt}\\) to the core while the external port remains 50 \\(\\Omega\\).\n\nSo the main point is: **\\(R_{\\rm in}=50~\\Omega\\) supplies only one constraint.** With no power/area/bandwidth constraint, the theoretical NF optimum is approached by making \\(g_m\\) and \\(g_mr_o\\) as large as possible and recalculating \\(R_F\\) from the matching equation. A real finite optimum requires an additional design constraint.",
        "format": "markdown",
        "sha256": "a7bdd400da6c81a8ecc5f576e0d0a7ed9a8738b5f85d991c574e85c2e0b7ab00"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly uses the finite-output-resistance matching relation and explains that increasing gm above 1/Rs while adjusting RF to preserve the 50-ohm match can lower NF below 1 + gamma. The additional limiting cases and practical constraints do not undermine the essential answer.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1984,
        "input_tokens": 2076,
        "output_tokens": 43435,
        "total_tokens": 45511,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42174,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1984,
        "input_tokens": 2076,
        "output_tokens": 43435,
        "total_tokens": 45511,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42174,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "At the frequency of interest, treat \\(C_1\\) as an AC short. Let\n\n\\[\nR_S=50\\ \\Omega,\\qquad G_S=\\frac1{R_S},\\qquad G_F=\\frac1{R_F},\n\\]\n\\[\ng_m=g_{m1}+g_{m2},\\qquad r_o=r_{o1}\\parallel r_{o2}.\n\\]\n\nAlso define an effective MOS thermal-noise factor\n\n\\[\n\\gamma_{\\rm eff} g_m=\\gamma_1 g_{m1}+\\gamma_2 g_{m2}.\n\\]\n\n---\n\n## 1. Input-match constraint\n\nFor the shunt-feedback inverter,\n\n\\[\nR_{\\rm in}=\\frac{R_F+r_o}{1+g_m r_o}.\n\\]\n\nIf \\(r_o\\to\\infty\\), this reduces to the familiar result\n\n\\[\nR_{\\rm in}\\simeq \\frac{1}{g_{m1}+g_{m2}}=\\frac{1}{g_m}.\n\\]\n\nSo with \\(r_o\\) neglected and \\(R_{\\rm in}=50\\ \\Omega\\),\n\n\\[\ng_m=\\frac{1}{50}=20\\ {\\rm mS}.\n\\]\n\nWith finite \\(r_o\\), maintaining \\(50\\ \\Omega\\) requires\n\n\\[\ng_m=\\frac{R_F+r_o}{R_S r_o}-\\frac1{r_o}\n=\\frac1{R_S}+\\frac{R_F/R_S-1}{r_o},\n\\]\n\nor, for a chosen total \\(g_m\\),\n\n\\[\nR_F=r_o(g_mR_S-1)+R_S.\n\\]\n\nThus, if \\(r_o\\) is finite, increasing \\(R_F\\) also requires increasing \\(g_m\\), i.e. burning more current.\n\n---\n\n## 2. Noise factor\n\nIgnoring gate-induced noise and flicker noise, the two main internal noise sources are:\n\n- MOS channel noise current:  \n  \\[\n  \\overline{i_{nd}^2}=4kT\\,\\gamma_{\\rm eff} g_m\n  \\]\n- feedback-resistor noise current:  \n  \\[\n  \\overline{i_{nF}^2}=4kT\\,G_F=\\frac{4kT}{R_F}\n  \\]\n\nA nodal noise analysis gives the noise factor\n\n\\[\nF\n=\n1+\n\\frac{\n\\gamma_{\\rm eff} g_m (G_S+G_F)^2\n+\nG_F(G_S+g_m)^2\n}{\nG_S(g_m-G_F)^2\n}.\n\\]\n\nThen\n\n\\[\n{\\rm NF}=10\\log_{10}F.\n\\]\n\n---\n\n## 3. Important limiting case: \\(r_o\\to\\infty\\)\n\nThen \\(g_m=G_S=1/R_S\\). Define \\(t=R_F/R_S\\). The expression simplifies to\n\n\\[\nF=\n1+\n\\frac{\\gamma_{\\rm eff}(t+1)^2+4t}{(t-1)^2}.\n\\]\n\nFor \\(R_F\\gg R_S\\), i.e. \\(t\\gg1\\),\n\n\\[\nF \\approx 1+\\gamma_{\\rm eff}\n+\n\\frac{4(\\gamma_{\\rm eff}+1)}{t}\n=\n1+\\gamma_{\\rm eff}\n+\nO\\!\\left(\\frac{R_S}{R_F}\\right).\n\\]\n\nSo the feedback-resistor noise contribution falls roughly as \\(R_S/R_F\\). The irreducible noise floor is then approximately\n\n\\[\nF_{\\min}\\approx 1+\\gamma_{\\rm eff}.\n\\]\n\nFor long-channel MOS devices with \\(\\gamma_{\\rm eff}\\approx 2/3\\),\n\n\\[\nF_{\\min}\\approx 1.67,\\qquad {\\rm NF}_{\\min}\\approx 2.2\\ {\\rm dB}.\n\\]\n\nFor short-channel devices \\(\\gamma_{\\rm eff}>1\\), so the minimum NF is worse.\n\n---\n\n## 4. Optimization procedure\n\n### If \\(r_o\\) is neglected\n\nThe match fixes\n\n\\[\ng_{m1}+g_{m2}=20\\ {\\rm mS}.\n\\]\n\nTherefore you cannot reduce the MOS channel-noise contribution by increasing \\(g_m\\); that would reduce \\(R_{\\rm in}\\) below \\(50\\ \\Omega\\). What you can do is:\n\n1. **Make \\(R_F\\) as large as practical**  \n   because its noise contribution scales roughly as \\(R_S/R_F\\).\n\n2. **Minimize \\(\\gamma_{\\rm eff}\\)**  \n   Use devices/operating regions with lower excess noise. If \\(\\gamma_1\\neq\\gamma_2\\), allocate more of the required \\(g_m\\) to the lower-\\(\\gamma\\) device.\n\n3. **Minimize gate resistance and gate-induced noise**  \n   Use multi-finger layout, short gate connections, proper sizing, etc.\n\n4. **Make \\(C_1\\) large enough**  \n   so \\(|X_{C1}|\\ll 50\\ \\Omega\\) at the lowest frequency of interest.\n\nThe lower bound is approximately \\(1+\\gamma_{\\rm eff}\\). To go below that, you need a different technique such as noise cancellation, impedance transformation, or another topology.\n\n---\n\n### If \\(r_o\\) is finite\n\nThe situation is different. From\n\n\\[\nR_F=r_o(g_mR_S-1)+R_S,\n\\]\n\nlarger \\(R_F\\) is obtained by using larger \\(g_m\\). In the high-\\(g_m\\) limit,\n\n\\[\nF\\approx 1+\\frac{\\gamma_{\\rm eff}}{g_mR_S}+\\frac{R_S}{R_F}.\n\\]\n\nWith the matching relation \\(R_F\\approx g_m r_o R_S\\),\n\n\\[\nF\\approx\n1+\\frac{\\gamma_{\\rm eff}+R_S/r_o}{g_mR_S}.\n\\]\n\nSo, in the simplified thermal-noise model, **NF improves monotonically as \\(R_F\\) and \\(g_m\\) are increased together**, while keeping \\(R_{\\rm in}=50\\ \\Omega\\). There is no finite unconstrained optimum; the theoretical limit tends toward \\(F\\to1\\) as \\(g_m,R_F\\to\\infty\\). In practice the optimum is set by:\n\n- available bias current/power,\n- required bandwidth,\n- output swing and linearity,\n- stability of the feedback loop,\n- input/output capacitance and high-frequency matching,\n- DC bias/headroom.\n\n---\n\n## Bottom line\n\n- For ideal large \\(r_o\\):  \n  \\[\n  g_{m1}+g_{m2}=20\\ {\\rm mS},\n  \\]\n  choose \\(R_F\\gg 50\\ \\Omega\\) to suppress feedback-resistor noise, and minimize \\(\\gamma_{\\rm eff}\\). The best NF approaches  \n  \\[\n  10\\log_{10}(1+\\gamma_{\\rm eff}).\n  \\]\n\n- With finite \\(r_o\\):  \n  use the largest practical \\(g_m\\) and choose  \n  \\[\n  R_F=r_o(g_mR_S-1)+R_S\n  \\]\n  to keep \\(R_{\\rm in}=50\\ \\Omega\\). Larger \\(R_F\\) plus larger \\(g_m\\) lowers NF, at the cost of power, bandwidth, and headroom.\n\nSo the optimization is essentially: **maximize \\(R_F\\) and, if finite \\(r_o\\) is exploited, maximize \\(g_m\\)/power, while minimizing \\(\\gamma_{\\rm eff}\\) and parasitic/gate noise.**",
        "format": "markdown",
        "sha256": "c1748e561440f91e4c8bb73c7dfe1192fdc9425dee0a11c50c941f972b9dcde0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly uses the finite-output-resistance matching relation, explains that gm can exceed 1/Rs while RF is adjusted to keep Rin at 50 Ω, and concludes that NF can fall below 1 + γ as gm and RF increase together.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1984,
        "input_tokens": 2076,
        "output_tokens": 41291,
        "total_tokens": 43367,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39802,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1984,
        "input_tokens": 2076,
        "output_tokens": 41291,
        "total_tokens": 43367,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39802,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Treat \\(V_{DD}\\) and \\(V_b\\) as ac grounds, and assume an ideal tail source \\(I_{SS}\\), \\(\\lambda=\\gamma=0\\), and zero MOS gate current.\n\nLet \\(v_p,v_x,v_o\\) be the small-signal voltages at \\(P,X,V_{\\text{out}}\\).\n\n### Open-loop voltage gain\n\nFor \\(M_1\\),\n\\[\nv_x=-g_{m1}R_1v_p,\\qquad\nR_1=R_{D1}\\parallel r_{o1}\\simeq R_{D1}.\n\\]\n\nFor the \\(M_2\\)-\\(M_3\\) pair, let their common-source voltage be \\(v_s\\). Since the tail current has zero small-signal variation,\n\\[\n(g_{m2}+g_{m3})v_s=g_{m2}v_x,\n\\]\nso the signal current delivered by \\(M_3\\) to the output is\n\\[\ni_3=g_{m3}v_s\n=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}v_x\n\\equiv G_{me}v_x .\n\\]\n\nThus, with \\(R_F\\) disconnected, the forward amplifier has gain\n\\[\n\\left.\\frac{v_o}{v_p}\\right|_{\\rm OL}=-A_0,\n\\]\nwhere\n\\[\nA_0=g_{m1}R_1G_{me}R_o,\\qquad\nR_o\\simeq R_{D2}\\parallel r_{o,\\text{out}},\n\\]\nand hence, for \\(\\lambda=0\\),\n\\[\n\\boxed{\nA_0=\ng_{m1}R_{D1}\n\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\nR_{D2}}\n\\]\nIf \\(g_{m2}=g_{m3}=g_m\\), then \\(G_{me}=g_m/2\\) and\n\\[\nA_0=\\frac12 g_{m1}g_mR_{D1}R_{D2}.\n\\]\n\n### Input impedance\n\nWith \\(R_F\\) connected, the output satisfies\n\\[\n\\frac{v_o}{R_o}+\\frac{v_o-v_p}{R_F}\n=-\\frac{A_0}{R_o}v_p,\n\\]\ngiving\n\\[\n\\frac{v_o}{v_p}=\\frac{R_o-A_0R_F}{R_o+R_F}.\n\\]\n\nThe input test current is\n\\[\nI_{in}=sC_{in}v_p+\\frac{v_p-v_o}{R_F}.\n\\]\nTherefore\n\\[\n\\boxed{\nZ_{in}(s)=\n\\frac{1}{\nsC_{in}+\\dfrac{1+A_0}{R_F+R_o}}\n=\n\\frac{R_F+R_o}{1+A_0+sC_{in}(R_F+R_o)}\n}\n\\]\nor equivalently\n\\[\n\\boxed{\nZ_{in}(s)=R_{in}\\parallel \\frac{1}{sC_{in}},\n\\qquad\nR_{in}=\\frac{R_F+R_o}{1+A_0}.\n}\n\\]\n\nWhen \\(R_F\\gg R_o\\), as usually assumed in the ideal-feedback approximation,\n\\[\n\\boxed{\nR_{in}\\simeq \\frac{R_F}{1+A_0},\\qquad\nZ_{in}(s)\\simeq \\frac{R_F}{1+A_0+sR_FC_{in}}\n}\n\\]\nwith\n\\[\nA_0\\simeq\ng_{m1}R_{D1}\n\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\nR_{D2}.\n\\]\n\nThus the inverting loop gain reduces the resistance associated with \\(R_F\\) by approximately \\(1+A_0\\), and the input pole is increased to\n\\[\n\\omega_{p,in}\\simeq \\frac{1+A_0}{R_FC_{in}}.\n\\]",
        "format": "markdown",
        "sha256": "f9a96c01f441cca0815909371daf743d625423f72f123b0a21676f23dc6ae562"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the exact result \u001b[?25l\u001b[?25h",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 204,
        "output_tokens": 35841,
        "total_tokens": 36045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35063,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 204,
        "output_tokens": 35841,
        "total_tokens": 36045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35063,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_P\\) be a test voltage applied at \\(P\\), with \\(V_{DD}\\) and \\(V_b\\) at ac ground. Assume an ideal \\(I_{SS}\\), matched \\(M_2,M_3\\) with transconductance \\(g_m\\), and neglect channel-length modulation.\n\nThe first stage gives\n\n\\[\nv_X=-g_{m1}R_{D1}v_P .\n\\]\n\nFor the differential pair \\(M_2-M_3\\), constancy of the tail current gives\n\n\\[\ng_m(v_s-v_X)+g_m v_s=0\n\\quad\\Rightarrow\\quad\nv_s=\\frac{v_X}{2},\n\\]\n\nso the incremental current delivered by \\(M_3\\) to the output is\n\n\\[\ni_{d3}=g_m v_s=\\frac{g_m}{2}v_X\n=-\\frac{g_{m1}g_mR_{D1}}{2}v_P\n\\equiv -Gv_P .\n\\]\n\nDefine the magnitude of the unloaded forward voltage gain\n\n\\[\nA_0=G R_{D2}\n=\\frac{1}{2}g_{m1}g_mR_{D1}R_{D2}.\n\\]\n\nAt \\(V_{\\text{out}}\\),\n\n\\[\n\\frac{v_o}{R_{D2}}+\\frac{v_o-v_P}{R_F}=-Gv_P,\n\\]\n\nwhile the test input current is\n\n\\[\ni_{\\rm in}=sC_{\\rm in}v_P+\\frac{v_P-v_o}{R_F}.\n\\]\n\nSolving,\n\n\\[\n\\frac{i_{\\rm in}}{v_P}\n=sC_{\\rm in}+\\frac{1+A_0}{R_F+R_{D2}}.\n\\]\n\nHence\n\n\\[\n\\boxed{\nZ_{\\rm in}(s)\n=\n\\left[\nsC_{\\rm in}+\\frac{1+A_0}{R_F+R_{D2}}\n\\right]^{-1}\n=\n\\frac{R_F+R_{D2}}\n{1+A_0+sC_{\\rm in}(R_F+R_{D2})}\n}\n\\]\n\nor equivalently\n\n\\[\nZ_{\\rm in}(s)=R_{\\rm in}\\parallel \\frac{1}{sC_{\\rm in}},\n\\qquad\n\\boxed{\nR_{\\rm in}=\\frac{R_F+R_{D2}}\n{1+\\frac12 g_{m1}g_mR_{D1}R_{D2}}\n}.\n\\]\n\nFor \\(R_F\\gg R_{D2}\\), the common Miller approximation is\n\n\\[\nZ_{\\rm in}\\simeq\n\\left[sC_{\\rm in}+\\frac{1+A_0}{R_F}\\right]^{-1}.\n\\]\n\nThe feedback is negative and therefore reduces the input resistance by approximately \\(1+A_0\\). If \\(M_2,M_3\\) are not matched, replace \\(g_m/2\\) by \\(g_{m2}g_{m3}/(g_{m2}+g_{m3})\\); finite \\(r_{o1}\\) is included by replacing \\(R_{D1}\\) with \\(R_{D1}\\parallel r_{o1}\\).",
        "format": "markdown",
        "sha256": "2e7c6add54b753a0375d4927532138577829ead15edbe91da84284496f6d5cd3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer derives the exact input resistance, including the output-side resistance of the feedback path: \\(R_{in}=(R_F+R_{D2})/(1+A_0)\\), with the correct two-stage gain. The added input-capacitance model is optional and does not alter the correct DC result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 204,
        "output_tokens": 31091,
        "total_tokens": 31295,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30478,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 204,
        "output_tokens": 31091,
        "total_tokens": 31295,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30478,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_P\\) be the input-node voltage and treat \\(V_{DD}\\), \\(V_b\\), and the ideal tail source \\(I_{SS}\\) as ac ground. Neglect body effect and transistor output resistance unless otherwise stated.\n\nThe current through the feedback resistor is\n\n\\[\ni_{RF}=\\frac{v_P-v_{\\text{out}}}{R_F}\n      =\\frac{1-A_v}{R_F}v_P ,\n\\qquad A_v\\equiv \\frac{v_{\\text{out}}}{v_P}.\n\\]\n\nHence the input impedance is generally\n\n\\[\n\\boxed{\nZ_{\\text{in}}(s)=\n\\left[sC_{\\text{in}}+\\frac{1-A_v(s)}{R_F}\\right]^{-1}\n}\n\\]\n\nor \\(Z_{\\text{in}}=(1/sC_{\\text{in}})\\parallel R_F/(1-A_v)\\).\n\n### Forward gain\n\nFor the circuit shown,\n\n\\[\nv_X=-g_{m1}R_{D1}v_P .\n\\]\n\nFor the \\(M_2\\)-\\(M_3\\) pair with an ideal tail source, the incremental current delivered by \\(M_3\\) is\n\n\\[\ni_3=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\,v_X .\n\\]\n\nThus define\n\n\\[\nG_m=g_{m1}R_{D1}\n\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}},\n\\]\n\nso that \\(i_3=-G_m v_P\\). The magnitude of the inverting open-loop voltage gain is\n\n\\[\nA_0=G_mR_{D2}\n=g_{m1}R_{D1}R_{D2}\n\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}} .\n\\]\n\nFor matched \\(M_2,M_3\\), with \\(g_{m2}=g_{m3}=g_m\\),\n\n\\[\n\\boxed{A_0=\\frac{1}{2}g_{m1}g_mR_{D1}R_{D2}}\n\\]\n\nand, if all three transistors have the same \\(g_m\\),\n\n\\[\nA_0=\\frac{1}{2}g_m^2R_{D1}R_{D2}.\n\\]\n\nSince \\(A_v\\simeq -A_0\\), the usual result, neglecting the loading of \\(R_F\\) on the output, is\n\n\\[\n\\boxed{\nR_{\\text{in}}=\\frac{R_F}{1+A_0}\n}\n\\]\n\nand\n\n\\[\n\\boxed{\nZ_{\\text{in}}(s)\n=\\left[sC_{\\text{in}}+\\frac{1+A_0}{R_F}\\right]^{-1}\n=\\frac{R_F}{1+A_0+sR_FC_{\\text{in}}}\n}\n\\]\n\nor equivalently \\(Z_{\\text{in}}=R_{\\text{in}}\\parallel 1/(sC_{\\text{in}})\\).\n\nIf the finite loading of \\(R_F\\) on \\(R_{D2}\\) is retained, replace \\(R_F\\) by \\(R_F+R_{D2}\\) in the resistive denominator:\n\n\\[\n\\boxed{\nZ_{\\text{in}}(s)=\n\\frac{R_F+R_{D2}}\n{1+A_0+sC_{\\text{in}}(R_F+R_{D2})}\n}\n\\]\n\nwhich reduces to the preceding expression when \\(R_F\\gg R_{D2}\\).",
        "format": "markdown",
        "sha256": "fbf7628f904a45857ced165dc3b7718bce4c2bc24c4d26ecd0492949f544048c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact Miller result \\(R_{in}=(R_F+R_{D2})/(1+A_0)\\) and an equivalent unloaded-gain expression matching the golden solution. The additional approximation and capacitance discussion do not change the correct final result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 204,
        "output_tokens": 36534,
        "total_tokens": 36738,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35860,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 204,
        "output_tokens": 36534,
        "total_tokens": 36738,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35860,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let the LDO output be\n\n\\[\nV_{\\text{out}}(t)=V_{\\text{out},0}+n_L(t),\n\\]\n\nwhere \\(S_{n_L}(f)\\) is the LDO output voltage-noise PSD. If \\(S_{th}\\) is already the noise PSD at \\(V_{\\text{out}}\\), then \\(S_{n_L}=S_{th}\\). If it is an internal noise source, use\n\n\\[\nS_{n_L}(f)=|T_{n\\rightarrow out}(j2\\pi f)|^2 S_{th}(f),\n\\]\n\nwith \\(T_{n\\rightarrow out}\\) the LDO noise-to-output transfer.\n\n### 1. Supply-noise-to-frequency conversion\n\nDefine the VCO supply-pushing coefficient\n\n\\[\nK_{\\rm DD}^{(\\omega)}\n \\equiv \\frac{\\partial \\omega_0}{\\partial V_{\\text{out}}}\n \\quad [\\mathrm{rad\\,s^{-1}V^{-1}}],\n\\]\n\nor \\(K_{\\rm DD}^{(f)}=K_{\\rm DD}^{(\\omega)}/(2\\pi)\\) in Hz/V.\n\nThe noise produces an instantaneous frequency perturbation\n\n\\[\n\\delta\\omega(t)=K_{\\rm DD}^{(\\omega)}n_L(t),\n\\]\n\nand hence output phase\n\n\\[\nv_o(t)=A\\cos\\!\\left[\\omega_0t+\\phi_n(t)\\right],\\qquad\n\\frac{d\\phi_n}{dt}=K_{\\rm DD}^{(\\omega)}n_L(t).\n\\]\n\nTherefore, at offset \\(f_m\\) from the carrier,\n\n\\[\n\\boxed{\nS_{\\phi,\\rm LDO}(f_m)\n=\n\\frac{\\left(K_{\\rm DD}^{(\\omega)}\\right)^2}\n     {(2\\pi f_m)^2}\\,\nS_{n_L}(f_m)\n=\n\\frac{\\left(K_{\\rm DD}^{(f)}\\right)^2}{f_m^2}\nS_{n_L}(f_m)\n}\n\\]\n\nin \\(\\mathrm{rad^2/Hz}\\).\n\nWith the usual SSB phase-noise convention,\n\n\\[\n\\boxed{\n\\mathcal L_{\\rm LDO}(f_m)\n=\n10\\log_{10}\\!\\left[\n\\frac{1}{2}\n\\frac{\\left(K_{\\rm DD}^{(\\omega)}\\right)^2}\n     {(2\\pi f_m)^2}\nS_{n_L}(f_m)\n\\right]\\ \\mathrm{dBc/Hz}\n}\n\\]\n\nor, using \\(K_{\\rm DD}^{(f)}\\) in Hz/V,\n\n\\[\n\\mathcal L_{\\rm LDO}(f_m)\n=\n10\\log_{10}\\!\\left[\n\\frac{\\left(K_{\\rm DD}^{(f)}\\right)^2S_{n_L}(f_m)}\n     {2f_m^2}\n\\right]\\ \\mathrm{dBc/Hz}.\n\\]\n\n### 2. Evaluating \\(K_{\\rm DD}\\) for the shown tank\n\nFor one half of the differential tank,\n\n\\[\n\\omega_0=\\frac{1}{\\sqrt{L_1C_T}},\n\\qquad\nC_T=C_0+C_v(V_b),\n\\]\n\nwhere approximately \\(V_b=V_{\\text{out}}-V_{\\text{cont}}\\). Thus\n\n\\[\nK_{\\rm DD}^{(\\omega)}\n=\n-\\frac{\\omega_0}{2C_T}\n\\frac{\\partial C_T}{\\partial V_{\\text{out}}}.\n\\]\n\nIf the MOS varactors are the dominant voltage-dependent capacitances, supply and control voltages act with opposite signs but equal magnitude:\n\n\\[\n\\frac{\\partial \\omega_0}{\\partial V_{\\text{out}}}\n\\simeq\n-\\frac{\\partial \\omega_0}{\\partial V_{\\text{cont}}},\n\\qquad\n|K_{\\rm DD}^{(\\omega)}|\\simeq K_{\\rm VCO}.\n\\]\n\nHence, for a quiet \\(V_{\\text{cont}}\\) and \\(S_{n_L}=S_{th}\\),\n\n\\[\n\\boxed{\nS_{\\phi,\\rm LDO}(f_m)\n\\simeq\n\\frac{K_{\\rm VCO}^2}{(2\\pi f_m)^2}S_{th}(f_m)\n}\n\\]\n\nfor \\(K_{\\rm VCO}\\) in rad/s/V, and\n\n\\[\n\\boxed{\n\\mathcal L_{\\rm LDO}(f_m)\n\\simeq\n10\\log_{10}\\!\\left[\n\\frac{K_{\\rm VCO}^2S_{th}(f_m)}\n     {2(2\\pi f_m)^2}\n\\right]\\ \\mathrm{dBc/Hz}.\n}\n\\]\n\nIf \\(K_{\\rm VCO}\\) is quoted in Hz/V, replace the denominator by \\(2f_m^2\\).\n\nThus flat LDO thermal noise produces close-in phase noise falling as \\(1/f_m^2\\), i.e. \\(-20\\) dB/decade. In practice, any LDO noise shaping, finite supply decoupling, and additional voltage-dependent parasitics must be included in \\(S_{n_L}(f)\\) and \\(K_{\\rm DD}\\). Intrinsic VCO phase noise is added to this contribution on a PSD basis, assuming the sources are uncorrelated. PSD one-/two-sided conventions must be kept consistent; this can change the numerical factor by two.",
        "format": "markdown",
        "sha256": "fc249fc1c93124310c0f8fd08a84888e7cc0e1ec5500cc09f0ab28b5a9f1c9de"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, converts LDO output-noise PSD to phase noise with the required 1/f_m^2 dependence, and explains the direct varactor coupling and relationship to K_VCO. The formulas and assumptions are consistent with the golden solution.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2850,
        "output_tokens": 26323,
        "total_tokens": 29173,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25303,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2850,
        "output_tokens": 26323,
        "total_tokens": 29173,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25303,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO noise is converted to VCO phase noise through the **supply-pushing / tuning sensitivity** of the VCO. You cannot get the phase noise from \\(S_{th}\\) alone; you also need \\(df_0/dV_{\\text{out}}\\) or \\(d\\omega_0/dV_{\\text{out}}\\).\n\n### 1. Noise at the VCO supply\n\nLet \\(v_n(t)\\) be the LDO noise voltage appearing at \\(V_{\\text{out}}\\). If \\(S_{th}\\) is an internal LDO noise source, first compute the LDO output-noise voltage spectrum\n\n\\[\nS_{v,\\text{LDO}}(f_m)\n=\n|H_{th\\to V_{\\text{out}}}(j2\\pi f_m)|^2 S_{th}(f_m),\n\\]\n\nwhere \\(f_m\\) is the offset frequency from the carrier. If \\(S_{th}\\) is already the LDO output voltage-noise PSD, then \\(S_{v,\\text{LDO}}=S_{th}\\).\n\n---\n\n### 2. Supply-to-frequency conversion\n\nAt low offset frequencies the inductors are essentially short circuits, so nodes \\(X\\) and \\(Y\\) follow \\(V_{\\text{out}}\\) in common mode. The MOS varactor bias is approximately\n\n\\[\nV_B = V_{\\text{out}} - V_{\\text{cont}}.\n\\]\n\nIf \\(V_{\\text{cont}}\\) is quiet, then LDO noise directly perturbs the varactor bias. With tank capacitance per side\n\n\\[\nC_T = C_{\\text{fixed}} + C_v(V_B),\n\\]\n\nthe oscillation frequency is\n\n\\[\n\\omega_0 = \\frac{1}{\\sqrt{L_1 C_T}},\n\\]\n\nso the supply sensitivity is\n\n\\[\nK_{\\omega,\\text{VDD}}\n=\n\\frac{\\partial \\omega_0}{\\partial V_{\\text{out}}}\n=\n-\\frac{\\omega_0}{2C_T}\\frac{dC_v}{dV_B}.\n\\]\n\nIn terms of Hz/V,\n\n\\[\nK_{f,\\text{VDD}}\n=\n\\frac{\\partial f_0}{\\partial V_{\\text{out}}}\n=\n\\frac{K_{\\omega,\\text{VDD}}}{2\\pi}.\n\\]\n\nFor this topology, this is approximately the negative of the ordinary VCO tuning gain:\n\n\\[\nK_{f,\\text{VDD}} \\approx - K_{\\text{VCO}}\n\\]\n\nif \\(K_{\\text{VCO}}=df_0/dV_{\\text{cont}}\\) is specified in Hz/V. The sign is irrelevant for noise power.\n\n---\n\n### 3. Convert frequency noise to phase noise\n\nThe LDO noise produces an instantaneous frequency perturbation\n\n\\[\n\\Delta f(t) = K_{f,\\text{VDD}}\\, v_n(t).\n\\]\n\nSince phase is the integral of frequency,\n\n\\[\n\\phi_n(t)=\\int 2\\pi \\Delta f(t)\\,dt,\n\\]\n\nthe one-sided phase-fluctuation PSD is\n\n\\[\n\\boxed{\nS_{\\phi,\\text{LDO}}(f_m)\n=\n\\left(\\frac{K_{f,\\text{VDD}}}{f_m}\\right)^2\nS_{v,\\text{LDO}}(f_m)\n}\n\\]\n\nfor \\(K_{f,\\text{VDD}}\\) in Hz/V. Equivalently, if \\(K_{\\omega,\\text{VDD}}\\) is in rad/s/V,\n\n\\[\n\\boxed{\nS_{\\phi,\\text{LDO}}(f_m)\n=\n\\frac{K_{\\omega,\\text{VDD}}^2}{(2\\pi f_m)^2}\nS_{v,\\text{LDO}}(f_m)\n}\n\\]\n\n---\n\n### 4. SSB phase noise in dBc/Hz\n\nFor small phase modulation and a one-sided PSD convention,\n\n\\[\n\\mathcal L_{\\text{LDO}}(f_m)\n=\n10\\log_{10}\\!\\left[\n\\frac{S_{\\phi,\\text{LDO}}(f_m)}{2}\n\\right].\n\\]\n\nThus\n\n\\[\n\\boxed{\n\\mathcal L_{\\text{LDO}}(f_m)\n=\n10\\log_{10}\\!\\left[\n\\frac{K_{f,\\text{VDD}}^2}{2 f_m^2}\nS_{v,\\text{LDO}}(f_m)\n\\right]\n\\ \\text{dBc/Hz}\n}\n\\]\n\nor, using rad/s/V,\n\n\\[\n\\boxed{\n\\mathcal L_{\\text{LDO}}(f_m)\n=\n10\\log_{10}\\!\\left[\n\\frac{K_{\\omega,\\text{VDD}}^2}{8\\pi^2 f_m^2}\nS_{v,\\text{LDO}}(f_m)\n\\right]\n\\ \\text{dBc/Hz}.\n}\n\\]\n\nIf \\(S_{th}\\) is taken as a two-sided PSD, the factor of \\(1/2\\) in \\(\\mathcal L\\) is handled differently; be consistent with the PSD convention.\n\n---\n\nSo for white LDO thermal noise, \\(S_{th}\\) constant, the VCO phase-noise contribution has a \\(1/f_m^2\\) shape, i.e. \\(-20\\) dB/decade with offset frequency. The total phase noise is the power sum of this contribution and the VCO’s intrinsic phase noise.",
        "format": "markdown",
        "sha256": "437de9fe6353083e9113cc686883e071337c2eb914b090edaa88bfbb313276cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, converts LDO voltage noise through df/dVout to frequency noise, and applies FM-to-phase conversion with the 1/offset-frequency-squared dependence. It also notes the direct varactor coupling and the relation to KVCO; any PSD convention or factor details are handled appropriately.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2752,
        "input_tokens": 2850,
        "output_tokens": 17791,
        "total_tokens": 20641,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2752,
        "input_tokens": 2850,
        "output_tokens": 17791,
        "total_tokens": 20641,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO noise acts as a **low-frequency frequency-modulating (FM) disturbance**. To compute phase noise, two quantities are needed:\n\n1. the LDO noise voltage actually present at \\(V_{\\text{out}}\\), and  \n2. the VCO supply-pushing factor \\(\\partial f_0/\\partial V_{\\text{out}}\\).\n\n### 1. Noise at the LDO output\n\nLet \\(f_m\\) be the carrier offset frequency. If \\(S_{th}\\) is an internal LDO noise source,\n\n\\[\nS_{v_n}(f_m)=\\left|H_{th}(j2\\pi f_m)\\right|^2 S_{th}(f_m),\n\\]\n\nwhere \\(H_{th}\\) is the noise-to-output transfer function, including LDO loop gain, output capacitance, decoupling and load impedance. If \\(S_{th}\\) is already the LDO output voltage-noise PSD, \\(H_{th}=1\\). For a current-noise source, \\(H_{th}\\) is the appropriate transimpedance.\n\n### 2. Supply-to-frequency conversion\n\nDefine the supply-pushing coefficient\n\n\\[\nK_{\\text{push}}\\equiv \\frac{\\partial f_0}{\\partial V_{\\text{out}}}\n\\qquad [\\mathrm{Hz/V}],\n\\]\n\nor \\(K_{\\omega,\\text{push}}=2\\pi K_{\\text{push}}\\) in \\(\\mathrm{rad\\,s^{-1}V^{-1}}\\).\n\nIn this circuit the tank common-mode voltage follows \\(V_{\\text{out}}\\), while the varactors are controlled by a ground-referenced \\(V_{\\text{cont}}\\). Thus their bias is approximately \\(V_{\\text{out}}-V_{\\text{cont}}\\). Since\n\n\\[\nf_0\\simeq \\frac{1}{2\\pi\\sqrt{L_{\\text{eq}}C_\\Sigma}},\n\\]\n\n\\[\nK_{\\text{push}}\\simeq\n-\\frac{f_0}{2C_\\Sigma}\n\\frac{\\partial C_\\Sigma}{\\partial V_{\\text{out}}}.\n\\]\n\nIf varactor tuning dominates, supply noise is equivalent to an opposite-polarity control-voltage noise, so\n\n\\[\nK_{\\text{push}}\\simeq -K_{\\text{VCO}},\n\\qquad\nK_{\\text{VCO}}=\\frac{\\partial f_0}{\\partial V_{\\text{cont}}}.\n\\]\n\nOther supply-dependent parasitics and AM-to-PM conversion should be included in a measured or PSS-simulated \\(K_{\\text{push}}\\).\n\n### 3. FM noise becomes phase noise\n\nFor\n\n\\[\nv_o(t)=A\\cos\\!\\left[2\\pi f_0t+\\phi(t)\\right],\n\\]\n\nthe noise produces\n\n\\[\n\\Delta f(t)=K_{\\text{push}}v_n(t),\n\\qquad\n\\frac{d\\phi}{dt}=2\\pi K_{\\text{push}}v_n(t).\n\\]\n\nTherefore\n\n\\[\n\\boxed{\nS_{\\phi,\\text{VCO}}(f_m)\n=\n\\frac{K_{\\text{push}}^2}{f_m^2}\\,\nS_{v_n}(f_m)\n=\n\\frac{K_{\\text{push}}^2\\left|H_{th}(j2\\pi f_m)\\right|^2}{f_m^2}\nS_{th}(f_m)\n}\n\\]\n\nin \\(\\mathrm{rad^2/Hz}\\). Equivalently,\n\n\\[\nS_{\\phi,\\text{VCO}}(\\Delta\\omega)\n=\n\\frac{K_{\\omega,\\text{push}}^2}{\\Delta\\omega^2}S_{v_n}.\n\\]\n\nFor one-sided PSDs, the SSB phase noise is\n\n\\[\n\\boxed{\n\\mathcal L_{\\text{LDO}}(f_m)\n=\n\\frac{1}{2}S_{\\phi,\\text{VCO}}\n=\n\\frac{K_{\\text{push}}^2\\left|H_{th}\\right|^2 S_{th}(f_m)}\n{2f_m^2}\n\\approx\n\\frac{K_{\\text{VCO}}^2\\left|H_{th}\\right|^2 S_{th}(f_m)}\n{2f_m^2}\n}\n\\]\n\nor, in dBc/Hz,\n\n\\[\n\\mathcal L_{\\rm dBc/Hz}\n=\n10\\log_{10}\\!\\left[\n\\frac{K_{\\text{push}}^2|H_{th}|^2S_{th}(f_m)}\n{2f_m^2}\n\\right].\n\\]\n\nIf \\(S_{th}\\) is a two-sided PSD, the equivalent expression is  \n\\(\\mathcal L=K_{\\text{push}}^2|H_{th}|^2S_{th}^{(2)}/f_m^2\\).\n\nFor flat white thermal noise and an LDO/VCO response that is flat at the offset of interest,\n\n\\[\nS_{th}(f_m)=S_0\n\\quad\\Rightarrow\\quad\n\\mathcal L_{\\text{LDO}}(f_m)\\propto \\frac{1}{f_m^2},\n\\]\n\ni.e. a \\(-20\\ \\mathrm{dB/dec}\\) phase-noise region. Flicker noise in the LDO would similarly produce a \\(1/f_m^3\\) region.\n\nThe formulas above apply to the baseband portion of the LDO noise. Noise near oscillator harmonics can also fold to the carrier through the oscillator’s periodic sensitivity; that requires PSS/harmonic-balance noise simulation or an ISF-based calculation. If the VCO is inside a PLL, the free-running result is further multiplied by \\(\\left|1/[1+G_{\\rm loop}(j2\\pi f_m)]\\right|^2\\).",
        "format": "markdown",
        "sha256": "37126cba52190e3e2b8aed445e094cb6be1ddc8377a6be0d4cd26d83db541fdc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, converts LDO output noise through Kpush = df/dVout and the 1/fm² FM-to-phase relationship, and gives the SSB factor. It also captures the varactor connection and the design benefit of reducing KVCO; the added modeling details do not conflict with the essential answer.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2752,
        "input_tokens": 2850,
        "output_tokens": 20570,
        "total_tokens": 23420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19459,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2752,
        "input_tokens": 2850,
        "output_tokens": 20570,
        "total_tokens": 23420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19459,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the usual **real (noisy) tail current source** and that \\(C_T\\) does not significantly change the oscillation amplitude, a moderate \\(C_T\\) generally improves the phase-noise floor.\n\nThe important tail-noise component is around \\(2\\omega_0\\): it is mixed by the switching differential pair into sidebands near \\(\\omega_0\\). If \\(Z_P(\\omega)\\) is the impedance seen at node \\(P\\) without \\(C_T\\), then\n\n\\[\nv_P=\\frac{i_{n,T}}{Z_P^{-1}+j\\omega C_T},\n\\qquad\n\\frac{v_P(C_T)}{v_P(0)}\n\\simeq \\frac{1}{1+j\\,2\\omega_0 C_T Z_P(2\\omega_0)} .\n\\]\n\nThus the tail-source contribution to \\(\\mathcal L(\\Delta\\omega)\\) is approximately reduced by\n\n\\[\n\\left|1+j\\,2\\omega_0 C_T Z_P(2\\omega_0)\\right|^{-2}.\n\\]\n\nIn other words, \\(C_T\\) provides a low-impedance path to ground for second-harmonic tail noise. It does not directly change the differential LC tank, so tank-loss and core-transistor noise are largely unchanged. Low-frequency flicker noise from the tail source also sees \\(C_T\\) as nearly open, so the close-in \\(1/f^3\\) phase noise is usually not improved.\n\nThere are important practical qualifications:\n\n- \\(P\\) sees an effective inductance through \\(M_1/M_2\\) and \\(L_1/L_2\\). \\(C_T\\) can therefore create a **common-mode resonance**. For a simple equal-tank model with capacitance \\(C\\) at each drain,\n\n  \\[\n  \\omega_{\\rm cm}\\approx \\omega_0\n  \\sqrt{\\frac{2C}{C_T+2C}} .\n  \\]\n\n  At this resonance the tail-node impedance and tail-noise gain can peak, producing a phase-noise hump or even common-mode instability/squegging.\n\n- A very large \\(C_T\\) self-biases the pair toward **class-C** operation. Properly designed, this can further improve phase noise/FOM by a few dB; with inadequate startup margin, voltage headroom, or common-mode damping, it can worsen close-in phase noise.\n\n- If \\(I_{SS}\\) were truly ideal/noiseless and the waveform remained unchanged, adding a noiseless capacitor would not change phase noise to first order.\n\nSo the concise answer is: **a properly sized, well-damped \\(C_T\\) lowers the \\(1/f^2\\) phase-noise floor by shunting tail-current-source noise near \\(2\\omega_0\\), but it does not remove flicker upconversion, and an arbitrarily large or undamped capacitor can create a common-mode resonance that degrades phase noise.**",
        "format": "markdown",
        "sha256": "950a3aaba567ed29ba03ad379170d30d14db2dba66c781c52b6de5eaccc4742c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It describes a possible class-C improvement and degradation from excessive CT, so it captures a non-monotonic effect. However, it omits the key class-C mechanism—peak tank currents exceeding ISS—and frames the main improvement as shunting 2ω0 tail-source noise; its flicker discussion does not identify CT-induced M1/M2 flicker-noise upconversion.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2934,
        "output_tokens": 21262,
        "total_tokens": 24196,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20685,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2934,
        "output_tokens": 21262,
        "total_tokens": 24196,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20685,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "A properly sized \\(C_T\\) usually **reduces the tail-current-source contribution to phase noise**; it does not itself generate noise.\n\nThe common-source node \\(P\\) has a strong \\(2\\omega_0\\) component because \\(M_1\\) and \\(M_2\\) conduct alternately. Noise from the tail current source around\n\n\\[\n\\Omega \\simeq 2\\omega_0\\pm\\Delta\\omega\n\\]\n\nis mixed by the switching pair into noise sidebands at \\(\\omega_0\\pm\\Delta\\omega\\). With \\(C_T\\), part of this RF noise current is bypassed to ground. If \\(R_P\\) is the effective resistance looking from \\(P\\) into the switching pair,\n\n\\[\n\\frac{i_{\\text{noise into pair}}}{i_{n,T}}\n  \\simeq \\frac{1}{1+j\\Omega R_P C_T},\n\\]\n\nso approximately\n\n\\[\n\\mathcal L_{\\text{tail}}\n \\simeq\n \\frac{\\mathcal L_{\\text{tail},0}}\n {1+(\\Omega R_P C_T)^2},\n \\qquad \\Omega\\approx2\\omega_0 .\n\\]\n\nThus increasing \\(C_T\\) suppresses tail-noise upconversion and often lowers both the close-in \\(1/f^3\\) noise and the white \\(1/f^2\\) phase-noise floor. A large \\(C_T\\) also tends to produce class-C-like operation, with narrow current pulses near the low-ISF points, which can further improve phase noise.\n\nImportant qualifications:\n\n- \\(C_T\\) is nearly open at very low frequencies, so slow tail-current/flicker variations that cause direct AM-to-PM conversion are not necessarily removed.\n- It does not reduce the fundamental noise floor set by tank loss and differential noise from \\(M_1,M_2\\); once tail noise is suppressed, further capacitance gives little benefit.\n- An excessively large \\(C_T\\) can cause startup/headroom problems, bimodal/common-mode oscillation, or a resonance with parasitic/intentional tail inductance. In that case phase noise can become worse, so practical designs often have an optimum \\(C_T\\).\n- For an ideal perfectly symmetric oscillator with a noiseless tail source, \\(C_T\\) is lossless and invisible in the purely differential linear mode; phase noise is unchanged except through the large-signal waveform changes above.\n\nSo: **moderate, well-designed \\(C_T\\): phase noise improves; too large or resonant \\(C_T\\): phase noise may degrade or oscillation may become unstable.**",
        "format": "markdown",
        "sha256": "72d9dec024e90c3fa522d7c2773c0ab34e2c05a1cc6b2db8030f6a53bec54539"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It recognizes an optimum and a class-C-like phase-noise improvement, but overemphasizes tail-noise filtering and omits the key peak-current-above-ISS mechanism and the specified small-CT flicker upconversion or large-CT low-frequency instability.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 2934,
        "output_tokens": 24357,
        "total_tokens": 27291,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23856,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 2934,
        "output_tokens": 24357,
        "total_tokens": 27291,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23856,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "A tail capacitor is an RF noise bypass, but its effect is not monotonic.\n\n- In a symmetric differential oscillator, node \\(P\\) contains mainly a \\(2\\omega_0\\) component. Noise from the tail current source near \\(2\\omega_0\\) is commutated by \\(M_1,M_2\\) into noise sidebands near \\(\\omega_0\\).\n- Adding \\(C_T\\) lowers the tail impedance at \\(2\\omega_0\\):\n  \\[\n  Z_P(2\\omega_0)\\simeq \\frac{1}{j2\\omega_0 C_T},\n  \\]\n  so this noise is shunted to ground rather than injected into the tanks. Consequently, the far-out \\(1/f^2\\) phase-noise floor generally improves—typically by a few dB, less if tank or switching-pair noise dominates.\n- At low offset frequencies \\(C_T\\) is essentially open. Therefore tail-current flicker noise and AM-to-PM conversion are not strongly filtered, so the close-in \\(1/f^3\\) phase noise often changes little.\n\nA large or poorly chosen \\(C_T\\) can also form a common-mode resonance with \\(L_1,L_2\\) and parasitic capacitances, and provides a return path for the switching-pair RF noise. This can produce a close-in phase-noise hump or even make phase noise worse. Hence there is an optimum/damped value; simply making \\(C_T\\) very large is not guaranteed to help.\n\n**Bottom line:** a properly sized \\(C_T\\) usually reduces the white/far-out phase noise, but it does not remove flicker-noise upconversion and can degrade close-in phase noise through common-mode resonance. If \\(I_{SS}\\) is ideal and noiseless as drawn, \\(C_T\\) does not improve the fundamental tank-loss phase noise.",
        "format": "markdown",
        "sha256": "3f0a58c38a458f652f5611ea6486c576e72d62680c6cc320543a188089c5f1db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that the effect need not be monotonic, but explains the improvement mainly as tail-noise filtering and the degradation as a generic common-mode resonance. It misses the class-C peak-current mechanism and Razavi’s specific degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 2934,
        "output_tokens": 27949,
        "total_tokens": 30883,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 2934,
        "output_tokens": 27949,
        "total_tokens": 30883,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let each half-tank have inductance \\(L\\), total node capacitance \\(C_T\\) (including MOS parasitics), and equivalent parallel loss resistance \\(R_p\\). Define\n\n\\[\n\\omega_0=\\frac{1}{\\sqrt{LC_T}},\\qquad\nf_0=\\frac{\\omega_0}{2\\pi},\\qquad\nQ=\\omega_0 C_T R_p .\n\\]\n\nThe local cross-coupled pair injects a current proportional to \\(I_{SS}\\) in phase with its tank voltage, while the coupling pair injects a current proportional to \\(I_1\\) in quadrature. Thus, for matched, hard-switched pairs,\n\n\\[\n\\alpha \\equiv \\frac{I_{\\text{coupling},1}}{I_{\\text{core},1}}\n\\simeq \\frac{I_1}{I_{SS}} .\n\\]\n\nThe tank admittance is\n\n\\[\nY_T=\\frac{1}{R_p}+j\\omega_0 C_T\n\\left(\\frac{\\omega}{\\omega_0}-\\frac{\\omega_0}{\\omega}\\right).\n\\]\n\nEquating its quadrature component to the coupling current gives\n\n\\[\nQ\\left(\\frac{\\omega_{\\rm osc}}{\\omega_0}\n-\\frac{\\omega_0}{\\omega_{\\rm osc}}\\right)=\\pm\\alpha .\n\\]\n\nHence\n\n\\[\n\\boxed{\\;\n\\omega_{\\rm osc}=\n\\omega_0\\left[\n\\sqrt{1+\\left(\\frac{I_1}{2Q I_{SS}}\\right)^2}\n\\;\\pm\\;\n\\frac{I_1}{2Q I_{SS}}\n\\right]\n\\;}\n\\]\n\nand, for the usual high-\\(Q\\), weak-coupling case,\n\n\\[\n\\boxed{\\;\nf_{\\rm osc}\\simeq\n\\frac{1}{2\\pi\\sqrt{LC_T}}\n\\left(1\\pm\\frac{I_1}{2Q I_{SS}}\\right)\n\\;}\n\\]\n\nThe two signs correspond to the two possible quadrature phase sequences/coupling polarities; the wiring and startup conditions select one. If \\(I_1=I_{SS}\\), the shift is approximately \\(\\pm f_0/(2Q)\\).\n\nThus, to first order the circuit oscillates very close to the individual tank resonance,\n\n\\[\nf_{\\rm osc}\\approx \\frac{1}{2\\pi\\sqrt{LC_T}},\n\\]\n\nwith only a small coupling-induced detuning. No numerical frequency can be obtained without \\(L\\), \\(C_T\\), \\(Q\\), and the current ratio.",
        "format": "markdown",
        "sha256": "933b576a263d8f89e571a091ea1590aa058ce8194ff2c424aca00090b62cf58c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the tank resonance and the coupling-induced shift, giving Δω ≈ (I₁/I_SS)ω₀/(2Q) and the two possible detuning signs. The added exact relation and weak-coupling approximation are consistent with the required estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1564,
        "output_tokens": 37691,
        "total_tokens": 39255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 37202,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1564,
        "output_tokens": 37691,
        "total_tokens": 39255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 37202,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a quadrature-coupled pair of LC VCOs. Let \\(C_t\\) denote the total effective capacitance from each tank node to ac ground (including MOS, varactor, and wiring parasitics), and let\n\n\\[\n\\omega_0=\\frac{1}{\\sqrt{L C_t}},\\qquad \nf_0=\\frac{1}{2\\pi\\sqrt{L C_t}},\\qquad\nQ=\\omega_0 C_t R_p ,\n\\]\n\nwhere \\(R_p\\) is the equivalent parallel tank loss. To first order, the oscillation frequency is therefore\n\n\\[\n\\boxed{f_{\\rm osc}\\approx f_0=\\frac{1}{2\\pi\\sqrt{L C_t}} }.\n\\]\n\nIf a capacitor \\(C_D\\) is connected directly between \\(X\\) and \\(Y\\), then \\(C_t=2C_D\\), giving \\(\\omega_0=1/\\sqrt{2LC_D}\\).\n\n### Coupling correction\n\nThe inner cross-coupled pair supplies negative conductance \\(G_m\\), while the outer pair supplies coupling transconductance \\(G_c\\). For ideal quadrature operation,\n\n\\[\n\\omega C_t-\\frac{1}{\\omega L}=\\pm G_c .\n\\]\n\nDefining \\(\\alpha=G_c/G_m\\) and using the oscillation condition \\(G_m\\simeq 1/R_p\\), the two possible mode frequencies are\n\n\\[\n\\boxed{\n\\omega_{\\pm}=\\omega_0\n\\left[\n\\sqrt{1+\\left(\\frac{\\alpha}{2Q}\\right)^2}\n\\pm \\frac{\\alpha}{2Q}\n\\right]\n}\n\\]\n\nor, for high \\(Q\\),\n\n\\[\n\\boxed{\nf_{\\pm}\\simeq f_0\\left(1\\pm\\frac{\\alpha}{2Q}\\right)\n\\simeq f_0\\sqrt{1\\pm\\frac{\\alpha}{Q}} }.\n\\]\n\nThe \\(+\\) and \\(-\\) signs correspond to the two possible quadrature sequences; startup asymmetry or tank mismatch normally selects one mode.\n\nFor hard-switched current-steering pairs, \\(\\alpha\\simeq I_1/I_{SS}\\), hence\n\n\\[\n\\boxed{\nf_{\\rm osc}\\simeq\n\\frac{1}{2\\pi\\sqrt{LC_t}}\n\\left(1\\pm\\frac{I_1}{2Q\\,I_{SS}}\\right)\n}.\n\\]\n\nFor identical square-law MOSFETs in small-signal operation, use \\(\\alpha\\simeq\\sqrt{I_1/I_{SS}}\\) instead. Since \\(Q\\) is normally large, the correction is small and \\(f_{\\rm osc}\\approx 1/(2\\pi\\sqrt{LC_t})\\). A numerical frequency requires \\(L\\), \\(C_t\\), \\(Q\\), and the coupling-current ratio.",
        "format": "markdown",
        "sha256": "d3ae1038f0020a57adf954fa1ce4245dea0a9bdc08e428d0a7553c7b8bc1c3e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives the tank resonance and the coupling-induced shift Δω ≈ αω₀/(2Q), including both possible quadrature modes and appropriate coupling-ratio estimates. The extra edge-of-oscillation assumption is stated, so it does not undermine the estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1472,
        "input_tokens": 1564,
        "output_tokens": 35680,
        "total_tokens": 37244,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35158,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1472,
        "input_tokens": 1564,
        "output_tokens": 35680,
        "total_tokens": 37244,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35158,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "tencent/hy4",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "A numerical value cannot be obtained from the schematic alone; \\(L\\), the total tank capacitance, the loaded \\(Q\\), and the coupling strength are needed. Symbolically, let each half-tank have\n\n\\[\n\\omega_0=\\frac{1}{\\sqrt{LC}},\\qquad   \nQ=\\omega_0 C R_p,\n\\]\n\nwhere \\(C\\) includes varactor and transistor parasitic capacitances.\n\nFor operation near resonance, the tank admittance is\n\n\\[\nY_T \\approx G+j\\,2C(\\omega-\\omega_0),\\qquad G=\\frac1{R_p}.\n\\]\n\nThe main cross-coupled pair cancels \\(G\\). Since the other oscillator is approximately \\(90^\\circ\\) out of phase, the coupling pair injects a quadrature current \\(j g_{mc}V\\). Thus\n\n\\[\n2C(\\omega-\\omega_0)\\simeq \\pm g_{mc},\n\\]\n\nand therefore\n\n\\[\n\\boxed{\\omega_{\\rm osc}\\simeq \\omega_0\n\\left[1\\pm \\frac{1}{2Q}\\frac{g_{mc}}{g_{m0}}\\right]} .\n\\]\n\nIf the effective transconductance ratio follows the tail-current ratio, as for hard-switched or properly scaled devices,\n\n\\[\n\\frac{g_{mc}}{g_{m0}}\\simeq \\frac{I_1}{I_{SS}},\n\\]\n\nso\n\n\\[\n\\boxed{\\omega_{\\rm osc}\\simeq\n\\frac{1}{\\sqrt{LC}}\n\\left(1\\pm \\frac{I_1}{2Q\\,I_{SS}}\\right)}\n\\]\n\nor\n\n\\[\n\\boxed{f_{\\rm osc}\\simeq\n\\frac{1}{2\\pi\\sqrt{LC}}\n\\left(1\\pm \\frac{I_1}{2Q\\,I_{SS}}\\right)} .\n\\]\n\nThe \\(+\\) or \\(-\\) sign corresponds to the two possible quadrature senses—equivalently, whether the coupling current leads or lags the local tank voltage. A particular startup condition or small tank mismatch normally selects one. For weak coupling, \\(I_1\\ll I_{SS}\\), the result simply reduces to the uncoupled tank resonance\n\n\\[\nf_{\\rm osc}\\approx \\frac{1}{2\\pi\\sqrt{LC_{\\rm eff}}}.\n\\]\n\nIf equal-sized square-law transistors are assumed instead, use \\(g_{mc}/g_{m0}\\approx\\sqrt{I_1/I_{SS}}\\) in the general expression.",
        "format": "markdown",
        "sha256": "7f19899c01ad12e8009ba8bcf48d246a52273bf0d91dc288c06b82cda3ea5647"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the tank resonance and the required coupling-induced shift, \\(\\Delta\\omega\\approx(g_{mc}/g_{m0})\\omega_0/(2Q)\\), with the appropriate current-ratio estimate and both possible quadrature modes. The \\(g_{mc}/(2C)\\) relation appears only as an intermediate step, which the golden solution permits.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1472,
        "input_tokens": 1564,
        "output_tokens": 36603,
        "total_tokens": 38167,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36121,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1472,
        "input_tokens": 1564,
        "output_tokens": 36603,
        "total_tokens": 38167,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36121,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    }
  ]
}
